Part time maintenance jobs in RayleighCreate job alerts

CNC SETTER Southend-On-Sea, Essex £30,000 TO £35,000 per annum DOE Permanent position / Full time - 6:45am – 4:30pm Mon – Thurs We are working with an established Engineering company who are looking to grow their team internally with new contracts and workload increase and require an experienced CNC Setter / Operator. Job Role: • Set and Run 1st Operations machinery safely - CNC machines including fixed head, sliding head, Lathes, turning mills and Bar feeders (including Dooson, Hardinge, Mori and Star)., • Support as required, with set and run 2nd Operations machinery safely – thread rollers, grinding, part markers, drill banks, depitching presses, torque testers and deburrers (manual/rotary etc)., • Work confidently with material from Aluminium, stainless steels and Inconel., • Coordination of all programming and setting activities, coordinating with other existing setters., • Carry out first-off and job run inspection of 2nd Op Machine parts., • Adhere to all documented health and safety, with correct PPE used to perform role., • Ensure all clockings and production records are completed accurately, and that the movement of work is recorded on the company computerised system., • Carry out first-off buddy checks and job run inspection of 1st and 2nd Operations machine parts., • Reduce scrap/rework reporting back efficiencies to the Production Manager., • Maintain machine efficiency to ensure we comply with On Time Deliveries, Arrears, Parts Per Hour (PPH) and Key Performance Indicators (KPIs)., • Manufacture good quality products in line with agreed standards and quality procedures., • Complete daily maintenance check sheets and cycle timesheets., • Ensure a safe and clean working environment is maintained at all times. Person specification: • Able to commute within or to Southend-On-Sea., • Run, Set 1st and 2nd Ops machining tools, with some programming experience., • Experience with bar feed machines., • CNC setting & operating experience is a must! (min. 3 years experienced required)., • Set and Run Machines with Fanuc and Seiki controls., • Attention to detail, including numeracy, and quality performance., • Ability to interpret engineering drawings and specifications., • Service minded and continuous enhancement of product/service knowledge., • Experience of working in the Automotive / Aerospace or Defence Industries is desirable. Important Notice: Noble Recruiting Limited, based in Billericay, Essex, is an equal opportunities employer. With over 17 years of industry experience, we specialise in both permanent recruitment and the provision of temporary workers. By submitting your application, you consent to the processing of your personal data by Noble Recruiting Limited. For further details on how we manage applicant data, please refer to our Privacy Policy available on our website. Application Status: Due to the high volume of applications received, we regret that if you do not hear from us within 14 days, your application has not been successful on this occasion.

SKILLED CENTRE-LESS GRINDER Southend-On-Sea, Essex £30,000 TO £35,000 per annum DOE Permanent position / Full time - 6:45am – 4:30pm Mon – Thurs We are working with an established Engineering company who are looking to grow their team internally with new contracts and workload increase and require an experienced & skilled centre-less Grinder to set & run several grinder machines within the workshop. Job Role: -Set and run centreless grinders, with experience running Wickman Scrivener, Ghiringhelli Grinder, Cincinnati or Tschadun Grinder (Experience is essential) -Experience operating Myford Grinder (desirable) -Support 2nd Operations machines safely as required – Thread-rolling (desirable), part markers, drill banks, depitching presses, torque testers and deburrers (manual/rotary etc). -Carry out first-off and job run inspection of 2nd Op Machine parts. -Adhere to all documented health and safety, with correct PPE used to perform role. -Carry out first-off buddy checks and job run inspection of 1st and 2nd Operations machine parts. -Reduce scrap/rework reporting back efficiencies to the Production Manager. -Maintain machine efficiency to ensure we comply with On Time Deliveries, Arrears, Parts Per Hour (PPH) and Key Performance Indicators (KPIs). -Manufacture good quality products in line with agreed standards and quality procedures. -Complete daily maintenance check sheets and cycle timesheets. Person Specification: -Strong understanding of aerospace standards. -Set and Run Manual Centre-less Grinders. -Experience running Wickman Scrivener, Ghiringhelli Grinder, Cincinnati or Tschadun Grinder (Experience is essential) -Experience operating Myford Grinder (desirable) -Ability to interpret engineering drawings and specifications. -Measurement skills – proficient in reading micrometre and working to tight tolerances. -Driver & own transport required due to the location of the company. Important Notice: Noble Recruiting Limited, based in Billericay, Essex, is an equal opportunities employer. With over 17 years of industry experience, we specialise in both permanent recruitment and the provision of temporary workers. By submitting your application, you consent to the processing of your personal data by Noble Recruiting Limited. For further details on how we manage applicant data, please refer to our Privacy Policy available on our website. Application Status: Due to the high volume of applications received, we regret that if you do not hear from us within 14 days, your application has not been successful on this occasion.

FM Conway is looking for a Drainage Operative to join our dedicated Water and Drainage Management team to support essential infrastructure across the highway network. In this role, you’ll work as part of a skilled two-person crew, carrying out a variety of vital tasks, including the cleaning, clearance, repair, and maintenance of drainage systems. Whether you already have experience in the drainage industry or are looking to start a new and rewarding career, we offer full training and ongoing support to help you succeed and grow in the role. This is a full time, permanent based in Rayleigh, Essex. \n\n The duties of the Drainage Operative role will include: \n\n -Assisting the HGV Drainage Engineers with a variety of drainage tasks, including high-pressure water jetting (HPWJ) to inspect, clean, and maintain drainage networks. \n\n -Carrying out drainage cleaning and investigation activities to identify and resolve issues. \n\n -Supporting the safe and effective use of high-pressure water jetting equipment. \n\n -Responding promptly to reactive and emergency callouts, helping to resolve urgent drainage problems. \n\n -Operating the GIS Trimble unit accurately and efficiently, following all company procedures and safety guidelines. \n\n What skills and experience do you need? \n\n To be considered for this role, you have a full UK driving licence. Experience in a similar role with high-pressure water jetting would be an advantage, it’s not essential - we can provide full training to help you develop the skills you need. A CSCS Card and a Confined Space ticket would be beneficial, allowing you to contribute more quickly in this dynamic environment. \n\n What benefits will you receive? \n\n As our Drainage Operative, we will offer you a range of fantastic benefits including career and professional development (including our HGV apprenticeship program), 23 days holiday plus bank holidays, company pension, life assurance, opportunities for internal and external training and access to a wide range of shopping discounts through our Rewarding Great People platform. We will also offer you a range of health and well-being benefits including 24-hour advice lines, and support from our in-house mental health first aiders. \n\n A brief introduction to FM Conway and the Water and Drainage Division \n\n FM Conway is a business of families with over 60 years’ experience of creating sustainable and innovative transportation solutions. We pride ourselves on our core values, creating a culture around Care, Innovation, Integrity and Excellence. The heart of FM Conway has, and always will be, its great people and we are always searching for talented individuals to join our family. \n\n You’ll be joining our Water and Drainage Management Division - one of the fastest-growing and most innovative areas of our business. This dynamic division delivers a full range of services, including drainage surveys, maintenance, and rehabilitation across the entire highway network. As part of this forward-thinking team, you’ll be working on the front line of infrastructure maintenance, supported by one of the UK’s largest and most technically advanced specialist transport fleets. It’s a fantastic opportunity to be part of a team that’s not only growing rapidly but also shaping the future of water and drainage solutions. \n\n So, if you want to Join our Family as our Drainage Operative, click apply today! \n\n Closing Date: 06/04/2026 \n\n FM Conway is an award-winning equal opportunities employer. We recognise that our workforce should reflect our diverse communities and we are proudly committed to creating an inclusive culture in which we celebrate and value individuals from all walks of life. EDI-Strategy \n\n At our heart we are a business that recognises and embraces individuality, so if you are excited about this role but you are unsure if you meet all of the criteria, we encourage you to apply anyway as you may still be the right candidate for this or another role we are recruiting for. \n\n We believe in people, not algorithms. That’s why every application is personally reviewed by a member of our Recruitment Team - never by AI. \n\n We look forward to receiving your application!

FM Conway is looking for an experienced HGV Class 2 Driver to join our team working from our Rayleigh depot on a full time, permanent basis. As our HGV Class 2 Driver you will work as part of a two-person team to carry out a range of services including cleaning, clearance, repair and maintenance of drains. \n\n Duties of the HGV Class 2 Driver role: \n\n

Senior Hydraulic Technician - This established Aviation Hydraulic Workshop is looking for an experienced Hydraulic Supervisor to support the testing, repair and overhaul of aviation hydraulic components in a high-quality, safety-led environment. (n.b. relocation assistance or visa sponsorship will be considered with this opportunity) Role PurposeYou'll work within our Hydraulic Workshop carrying out the test, repair and overhaul of a wide range of hydraulic aviation components, ensuring all work is completed in line with OEM manuals/instructions and the required quality and safety standards. You'll also support reporting, estimates and continuous improvement to help reduce turn-time and cost. Key Responsibilities • Conduct thorough testing, repair and overhaul of hydraulic aviation components in line with original manufacturer manuals and instructions., • Maintain strict adherence to quality standards, procedures and documentation requirements., • Establish and maintain a safe, legally compliant working environment., • Prepare detailed workshop reports and material reviews to support accurate customer estimates for Purchasing and Commercial teams., • Support the development of new capabilities and improved methods to reduce cost and turnaround time., • Complete risk assessments and ensure all safety requirements are met., • Strong understanding of EASA Part 145 regulatory requirements (component maintenance/repair/overhaul)., • Essential experience within an aviation hydraulic environment (similar role experience preferred)., • Hands-on experience using Skydrol and hydraulic oil rigs., • Confident with MS Office and business systems/processes., • Strong ability to interpret manuals and accurately record inspection findings., • Excellent planning/organisation, communication (written and verbal) and teamworking skills., • Highly safety-conscious with strong attention to detail.

Multi Trader Southend On Sea 38,000 + van and fuel card Permanent We are currently seeking a skilled and experienced Social Housing Multi Trader to join our dedicated team in the Southend On Sea area. Job Description: As a Social Housing Multi, you will play a crucial role in maintaining and improving social housing properties. Your responsibilities will include: • Conducting repairs and maintenance tasks in various trades, including plumbing, painting, and general building maintenance however mainly Carpentry., • Responding to service requests in a timely and efficient manner., • Ensuring all work is completed to high-quality standards and in compliance with relevant regulations., • Collaborating with other team members and contractors to achieve project goals., • Proven experience as a Multi in a social housing or similar environment., • Relevant trade qualifications in plumbing, carpentry, or another related field (desired), • Knowledge of health and safety regulations and compliance., • Excellent problem-solving skills and attention to detail., • Carpentry, painting, and general maintenance skills., • Ability to work independently and as part of a team., • Time management skills to prioritize tasks and meet deadlines.

SKILLED CENTRE-LESS GRINDER Southend-On-Sea, Essex £30,000 TO £35,000 per annum DOE Permanent position / Full time - 6:45am – 4:30pm Mon – Thurs We are working with an established Engineering company who are looking to grow their team internally with new contracts and workload increase and require an experienced & skilled centre-less Grinder to set & run several grinder machines within the workshop. Job Role: -Set and run centreless grinders, with experience running Wickman Scrivener, Ghiringhelli Grinder, Cincinnati or Tschadun Grinder (Experience is essential) -Experience operating Myford Grinder (desirable) -Support 2nd Operations machines safely as required – Thread-rolling (desirable), part markers, drill banks, depitching presses, torque testers and deburrers (manual/rotary etc). -Carry out first-off and job run inspection of 2nd Op Machine parts. -Adhere to all documented health and safety, with correct PPE used to perform role. -Carry out first-off buddy checks and job run inspection of 1st and 2nd Operations machine parts. -Reduce scrap/rework reporting back efficiencies to the Production Manager. -Maintain machine efficiency to ensure we comply with On Time Deliveries, Arrears, Parts Per Hour (PPH) and Key Performance Indicators (KPIs). -Manufacture good quality products in line with agreed standards and quality procedures. -Complete daily maintenance check sheets and cycle timesheets. Person Specification: -Strong understanding of aerospace standards. -Set and Run Manual Centre-less Grinders. -Experience running Wickman Scrivener, Ghiringhelli Grinder, Cincinnati or Tschadun Grinder (Experience is essential) -Experience operating Myford Grinder (desirable) -Ability to interpret engineering drawings and specifications. -Measurement skills – proficient in reading micrometre and working to tight tolerances. -Driver & own transport required due to the location of the company. Important Notice: Noble Recruiting Limited, based in Billericay, Essex, is an equal opportunities employer. With over 17 years of industry experience, we specialise in both permanent recruitment and the provision of temporary workers. By submitting your application, you consent to the processing of your personal data by Noble Recruiting Limited. For further details on how we manage applicant data, please refer to our Privacy Policy available on our website. Application Status: Due to the high volume of applications received, we regret that if you do not hear from us within 14 days, your application has not been successful on this occasion.

Location: Southend, Essex Job Type: Full-Time, Permanent Salary: Based on experience About Soltec UK Soltec is a well-established air conditioning and ventilation services company based in Southend, Essex. We offer a wide range of services across both domestic and commercial projects, including design, installation, servicing, maintenance, fault-finding and decommissioning of AC and ventilation systems. We are a family-run business first established in 1996, and our priority has always been customer service and quality . We also pride ourselves on looking after our team, with our current team being with us for many years. Role & Responsibilities: • Install, service, maintain and repair AC systems for domestic and commercial clients., • Carry out fault-finding and diagnostics on a wide range of AC equipment., • Complete installations to high standards, ensuring compliance with industry regulations., • Provide excellent customer service and advice on system operation., • Work independently and as part of a team to deliver projects on time., • Formal HVAC / Air Conditioning qualification (City & Guilds / NVQ / equivalent), • FGas certification, • Proven experience working as an AC Engineer, • An interest in learning and working with Airzone systems and controls, • Strong fault-finding and technical skills, • Good understanding of safety practices and compliance standards, • Full UK driving licence, • Ability to travel within Essex & London JTRA1_UKTJ

Multi Trader Southend On Sea 38,000 + van and fuel card Permanent We are currently seeking a skilled and experienced Social Housing Multi Trader to join our dedicated team in the Southend On Sea area. Job Description: As a Social Housing Multi, you will play a crucial role in maintaining and improving social housing properties. Your responsibilities will include: Conducting repairs and maintenance tasks in various trades, including plumbing, painting, and general building maintenance however mainly Carpentry. Responding to service requests in a timely and efficient manner. Ensuring all work is completed to high-quality standards and in compliance with relevant regulations. Collaborating with other team members and contractors to achieve project goals. Providing excellent customer service to residents and addressing their concerns with professionalism.Qualifications: Proven experience as a Multi in a social housing or similar environment. Relevant trade qualifications in plumbing, carpentry, or another related field (desired) Knowledge of health and safety regulations and compliance. Excellent problem-solving skills and attention to detail. Strong communication and interpersonal skills.Skills: Carpentry, painting, and general maintenance skills. Ability to work independently and as part of a team. Time management skills to prioritize tasks and meet deadlines. Customer-focused approach with good communication skills...

Centreless Grinder Location: Kent / Essex Border Salary: up to £35,000, Full time role- 4 day week – 37 hours Our client is looking to recruit a Skilled Centreless Grinder. This is an excellent opportunity for a skilled centreless grinder to join our client’s team. The candidate must be experienced in engineering and have a strong aerospace background. You will be required to set and run a variety of grinders, inclusive of 2nd operation machine tools. Proficient in reading micrometre and working to tight tolerances (0.5 tolerances). Able to interpret engineering drawings and specifications. Centreless Grinder Duties: Set and run centreless grinders, with experience running Wickman Scrivener, Ghiringhelli Grinder, Cincinnati or Tschadun Grinder (essential) Experience operating Myford Grinder (desirable) Support 2nd Operations machines safely as required – Thread-rolling (desirable), part markers, drill banks, torque testers and deburrers (manual/rotary etc). Carry out first-off and job run inspection of 2nd Op Machine parts. Adhere to all documented health and safety, with correct PPE used to perform role. Carry out first-off buddy checks and job run inspection of 1st and 2nd Operations machine parts. Reduce scrap/rework reporting back efficiencies to the Production Manager. Maintain machine efficiency to ensure we comply with On Time Deliveries, Arrears, Parts Per Hour (PPH) and Key Performance Indicators (KPIs). Manufacture good quality products in line with agreed standards and quality procedures. Complete daily maintenance check sheets and cycle timesheets. Ensure a safe and clean working environment is always maintained. Centreless Grinder Core Skills/Attributes Needed: Strong understanding of aerospace standards. Set and Run Manual Centre-less Grinders Ability to interpret engineering drawings and specifications. Measurement skills – proficient in reading micrometre and working to tight tolerances. Team Player and communicate with colleagues to ensure the implementation of the company’s policies and goals Attention to detail, including numeracy, and quality performance. Additional Information Employee Benefits including Pension Plan, Health Cash Plan, Life Assurance, EAP and Shopping Discounts. Salary £30,000-£35,000 dependent on experience Keywords: Centreless, Grinder, Aerospace, Engineering, Manufacturing, Centrelss Grinder, Wickman Scrivener, Ghiringhelli Grinder, Cincinnati or Tschadun, Lathes, Drilling Centreless Grinder

Centreless Grinder /Toolmaker Location: Kent / Essex Border Salary: £30K to £35K – Full time role- 4 day week – 37 hours Our client is looking to recruit a Skilled Centreless Grinder. This is an excellent opportunity for a skilled centreless grinder to join our client’s team. The candidate must be experienced in engineering and have a strong aerospace background. You will be required to set and run a variety of grinders, inclusive of 2nd operation machine tools. Proficient in reading micrometre and working to tight tolerances (0.5 tolerances). Able to interpret engineering drawings and specifications. Centreless Grinder Duties: Set and run centreless grinders, with experience running Wickman Scrivener, Ghiringhelli Grinder, Cincinnati or Tschadun Grinder (essential) Experience operating Myford Grinder (desirable) Support 2nd Operations machines safely as required – Thread-rolling (desirable), part markers, drill banks, torque testers and deburrers (manual/rotary etc). Carry out first-off and job run inspection of 2nd Op Machine parts. Adhere to all documented health and safety, with correct PPE used to perform role. Carry out first-off buddy checks and job run inspection of 1st and 2nd Operations machine parts. Reduce scrap/rework reporting back efficiencies to the Production Manager. Maintain machine efficiency to ensure we comply with On Time Deliveries, Arrears, Parts Per Hour (PPH) and Key Performance Indicators (KPIs). Manufacture good quality products in line with agreed standards and quality procedures. Complete daily maintenance check sheets and cycle timesheets. Ensure a safe and clean working environment is always maintained. Centreless Grinder Core Skills/Attributes Needed: Strong understanding of aerospace standards. Set and Run Manual Centre-less Grinders Ability to interpret engineering drawings and specifications. Measurement skills – proficient in reading micrometre and working to tight tolerances. Team Player and communicate with colleagues to ensure the implementation of the company’s policies and goals Attention to detail, including numeracy, and quality performance. Additional Information Employee Benefits including Pension Plan, Health Cash Plan, Life Assurance, EAP and Shopping Discounts. Keywords: Centreless, Grinder, Aerospace, Engineering, Manufacturing, Centrelss Grinder, Wickman Scrivener, Ghiringhelli Grinder, Cincinnati or Tschadun, Lathes, Drilling Centreless Grinder

CNC Setter and Operator, Programmer Location: Kent / Essex Border Salary: up to £35,000, 4 Day week, working hours Monday to Thursday (Apply online only); 37-hour week Our client has an excellent opportunity for a CNC Setter and Operator. Reporting into the Production Manager, the candidate must be experienced in aerospace engineering sector, working with high tolerance parts. You will be required to program, set and run a variety of 1st operation machine tools, CNC machines inclusive of sliding and fixed-head CNC. Ideally looking for a candidate who can programme on CADCAM in addition to support the effective running of the shop floor. Responsible for coordination of programming and setting to point of satisfactory first off and review current product ranges to improve efficiency of manufacture. The candidate will endeavour to reduce waste and improve productivity, in line with zero defect philosophy, through increased effectiveness and efficiency whenever possible. CNC Setter and Operator – Miller / Turner duties will consist of: Set and Run 1st Operations machinery safely - CNC machines including fixed head, sliding head, Lathes, turning mills and Bar feeders (including Dooson, Hardinge, Mori and Star) Support as required, with set and run 2nd Operations machinery safely – thread rollers, grinding, part markers, drill banks, depitching presses, torque testers and deburrers (manual/rotary etc). Work confidently with material from Aluminium, stainless steels and Inconel. Coordination of all programming and setting activities, coordinating with other existing setters. Carry out first-off and job run inspection of 2nd Op Machine parts Adhere to all documented health and safety, with correct PPE used to perform role. Ensure all clockings and production records are completed accurately, and that the movement of work is recorded on the company computerised system (EFACS). Carry out first-off buddy checks and job run inspection of 1st and 2nd Operations machine parts. Reduce scrap/rework reporting back efficiencies to the Production Manager. Maintain machine efficiency to ensure we comply with On Time Deliveries, Arrears, Parts Per Hour (PPH) and Key Performance Indicators (KPIs). Manufacture good quality products in line with agreed standards and quality procedures. Complete daily maintenance check sheets and cycle timesheets. Ensure a safe and clean working environment is maintained at all times. Willing to train junior operators to develop skills, when necessary. CNC Setter and Operator, Programmer Core Skills/Attributes Needed: Aerospace engineering background, minimum 2 years’ experience. Run, Set 1st and 2nd Ops machining tools, with some programming experience. Experience with bar feed machines Set and Run Machines with Fanuc and Seiki controls. Ability to interpret engineering drawings and specifications. Strong measurement skills using varied tooling. Strong knowledge of frontline maintenance activities including practical ability to undertake tasks. Close coordination with Production manager and setters to recommend and improve efficiency. Team Player and communicate with colleagues to ensure the implementation of the company’s policies and goals Attention to detail, including numeracy, and quality performance. Flexible and pro-active attitude Service minded and continuous enhancement of product/service knowledge. Achievement of team objectives and contributing to departmental KPIs and support business objectives. Keywords: CNC, Turner, Miller, Fanuc, Lathes, Mills, Engineering, Aerospace, CADCAM, Dooson, Hardinge, Mori, Star, Fanuc, Seiki Controls CNC Setter and Operator, Programmer

Centreless Grinder /Toolmaker Location: Kent / Essex Border Salary: £30K to £35K – Full time role- 4 day week – 37 hours Our client is looking to recruit a Skilled Centreless Grinder. This is an excellent opportunity for a skilled centreless grinder to join our client’s team. The candidate must be experienced in engineering and have a strong aerospace background. You will be required to set and run a variety of grinders, inclusive of 2nd operation machine tools. Proficient in reading micrometre and working to tight tolerances (0.5 tolerances). Able to interpret engineering drawings and specifications. Centreless Grinder Duties: Set and run centreless grinders, with experience running Wickman Scrivener, Ghiringhelli Grinder, Cincinnati or Tschadun Grinder (essential) Experience operating Myford Grinder (desirable) Support 2nd Operations machines safely as required – Thread-rolling (desirable), part markers, drill banks, torque testers and deburrers (manual/rotary etc). Carry out first-off and job run inspection of 2nd Op Machine parts. Adhere to all documented health and safety, with correct PPE used to perform role. Carry out first-off buddy checks and job run inspection of 1st and 2nd Operations machine parts. Reduce scrap/rework reporting back efficiencies to the Production Manager. Maintain machine efficiency to ensure we comply with On Time Deliveries, Arrears, Parts Per Hour (PPH) and Key Performance Indicators (KPIs). Manufacture good quality products in line with agreed standards and quality procedures. Complete daily maintenance check sheets and cycle timesheets. Ensure a safe and clean working environment is always maintained. Centreless Grinder Core Skills/Attributes Needed: Strong understanding of aerospace standards. Set and Run Manual Centre-less Grinders Ability to interpret engineering drawings and specifications. Measurement skills – proficient in reading micrometre and working to tight tolerances. Team Player and communicate with colleagues to ensure the implementation of the company’s policies and goals Attention to detail, including numeracy, and quality performance. Additional Information Employee Benefits including Pension Plan, Health Cash Plan, Life Assurance, EAP and Shopping Discounts. Salary £30,000-£35,000 dependent on experience Keywords: Centreless, Grinder, Aerospace, Engineering, Manufacturing, Centrelss Grinder, Wickman Scrivener, Ghiringhelli Grinder, Cincinnati or Tschadun, Lathes, Drilling Centreless Grinder

Traffic Engineer Rochford covering the Essex region (Field based) Full time, permanent Telent are looking for an addition to the region Traffic Essex Engineering team due to growth and increased demand from our customers. We are looking for an experienced, Traffic Engineer who has a proven track record of maintaining and rectifying faults on Traffic Signals Units / Traffic Lighting Systems. This is a field based role which will see you travel across the West Essex region in all weather conditions. Reporting to the Contract Manager, the successful Traffic Signals Maintenance Engineer will be required to carry out maintenance works of Traffic Signals units / Traffic Light systems, detection boxes, Traffic Lights controllers, and get involved in planned maintenance and "switch off" activities. Additional duties may include the commissioning of Traffic Signals / Traffic Lighting equipment if or when required. The successful Traffic Signals Maintenance Engineer will also be required to liaise with the customer(s) on-site, to fault find, troubleshoot, and rectify various issues and problems with Traffic Signals / Traffic Light systems and units. The Traffic Signals Maintenance Engineer will need to be flexible to travel across the Essex region. You will also be required to be a part of an on-call standby rota of 1-in-4 weeks (covering weekends and night time call outs if and when required). When you join our Engineering Team at Telent, you'll be empowered to innovate and drive common solutions, working closely with technical experts who are proud of the impact their work makes. Come join a high-performing team doing complex and critical work. Help build and keep the nation's critical infrastructure connected and protected 24/7. What you'll do: - Follow all site specifications and ensure upkeep of quality and accuracy - Demonstrate a strong following of all Health & Safety policies and procedures and be alert in identifying potential hazards by removing or minimising them wherever possible - Apply proven Traffic Signals / Traffic Lighting maintenance experience to assigned works across the Essex region - Work within the standard operating procedure, and follow scientific methods - Carry out planned Periodic Inspections of Traffic Signals / Traffic Light Systems - Attend reactive faults and planned periodic inspections as required by the contract(s) - Interrogate all types of Traffic Controllers (Traffic Signals Controllers) and carry out fault analysis under supervision of a Senior Traffic Engineer - Complete any maintenance works on Traffic Signals / Traffic Lights Systems in line with agreed schedules and SLA's - Work outdoors in all-weathers, and attend the Rochford depot from time to time Who you are: As the successful Traffic Signals Maintenance Engineer, you will ideally have previous and/or current experience working with Traffic Signals Units / Traffic Light Systems, maintaining them against technical specifications and be proficient in a range of technical processes and procedures, through job-related training and experience. Strong communication skills are also required for this position as you will be customer facing, alongside a strong customer service focus - this attribute is essential when it comes down to the success of our work. Key requirements: - Electrical knowledge or equivalent Traffic Signals Units / Traffic Lights maintenance experience - Strong knowledge of and experience with Traffic Controllers, Switches, Detection Boxes, and any associated equipment relating to Traffic Signals Units / Traffic Lights - Fully NHSS / HERS accredited through Sector 8 / Chapter 8 - Full UK Driving Licence holder Telent - What we offer: A career at Telent can span sectors, roles, technologies and customers giving you the opportunity to develop, learn new skills and make an impact. We are growing and we rely on our committed Team to deliver. We nurture the talent that makes this happen, by our on-going commitment to creating an inclusive culture that respects and values difference, that celebrates diverse ideas. We want everyone be themselves and to thrive at work. Additional benefits: - Full kitted out Commercial Vehicle - A 1-in-4 weeks on-call / standby salary uplift - Ongoing training and development - 26 days holiday, plus public bank holidays, and the option to buy or sell five days each year - Pension scheme - A range of family friendly policies - Auto enrolment onto the occupational health support and wellbeing portal - Discounts on Cinema, Restaurants and Shopping through the Telent Rewards & Discounts Scheme. About Telent: Telent is a leading technology company and specialist in the design, build, support and maintenance, drawing on decades of experience in mission critical communications and technology of the UK's critical digital infrastructure. The work we do helps connect thousands of people and communities, using the best technology and innovation available. When you join us, you'll have the opportunity to make a real impact on all our futures by fulfilling your potential and delivering high performance. We work together to make everyday life work better for everyone. You'll be part of a team of more than 3,000 brilliant, dedicated people committed to getting the job done well. Brilliance brought together. We are guided by our values and behaviours: - Be Inclusive - Take Responsibility - Customer focused - Collaboration #LI #Remote Same Posting Description for Internal and External Candidates

CNC Setter and Operator – Miller / Turner Location: Kent / Essex Border Salary: up to £35,000 We have an excellent opportunity for a CNC Setter and Operator. Reporting into the Production Manager, the candidate must be experienced in aerospace engineering sector, working with high tolerance parts. They will be required to program, set and run a variety of 1st operation machine tools, CNC machines inclusive of sliding and fixed-head and milling, in line with health and safety legislation. Responsible for coordination of programming and setting to point of satisfactory first off and review current product ranges to improve efficiency of manufacture. The candidate will endeavour to reduce waste and improve productivity, in line with zero defect philosophy, through increased effectiveness and efficiency whenever possible. Please note this is a full time role but work 4 days a week. Working hours Monday to Thursday (Apply online only); 37-hour week CNC Setter and Operator – Miller / Turner duties will consist of: Set and Run 1st Operations machinery safely - CNC machines including fixed head, sliding head, Lathes, turning mills and Bar feeders (including Dooson, Hardinge, Mori and Star) Support as required, with set and run 2nd Operations machinery safely – thread rollers, grinding, part markers, drill banks, depitching presses, torque testers and deburrers (manual/rotary etc). Work confidently with material from Aluminium, stainless steels and Inconel. Coordination of all programming and setting activities, coordinating with other existing setters. Carry out first-off and job run inspection of 2nd Op Machine parts Adhere to all documented health and safety, with correct PPE used to perform role. Ensure all clockings and production records are completed accurately, and that the movement of work is recorded on the company computerised system (EFACS). Carry out first-off buddy checks and job run inspection of 1st and 2nd Operations machine parts. Reduce scrap/rework reporting back efficiencies to the Production Manager. Maintain machine efficiency to ensure we comply with On Time Deliveries, Arrears, Parts Per Hour (PPH) and Key Performance Indicators (KPIs). Manufacture good quality products in line with agreed standards and quality procedures. Complete daily maintenance check sheets and cycle timesheets. Ensure a safe and clean working environment is maintained at all times. Willing to train junior operators to develop skills, when necessary. CNC Setter and Operator – Miller / Turner Core Skills/Attributes Needed: Aerospace engineering background, minimum 2 years’ experience. Run, Set 1st and 2nd Ops machining tools, with some programming experience. Experience with bar feed machines Set and Run Machines with Fanuc and Seiki controls. Ability to interpret engineering drawings and specifications. Strong measurement skills using varied tooling. Strong knowledge of frontline maintenance activities including practical ability to undertake tasks. Close coordination with Production manager and setters to recommend and improve efficiency. Team Player and communicate with colleagues to ensure the implementation of the company’s policies and goals Attention to detail, including numeracy, and quality performance. Flexible and pro-active attitude Service minded and continuous enhancement of product/service knowledge. Achievement of team objectives and contributing to departmental KPIs and support business objectives. Keywords: CNC, Turner, Miller, Fanuc, Lathes, Mills, Engineering, Aerospace CNC Setter Operator – Miller / Turner

Centreless Grinder /Toolmaker Location: Kent / Essex Border Salary: £30K to £35K – Full time role- 4 day week – 37 hours Our client is looking to recruit a Skilled Centreless Grinder. This is an excellent opportunity for a skilled centreless grinder to join our client’s team. The candidate must be experienced in engineering and have a strong aerospace background. You will be required to set and run a variety of grinders, inclusive of 2nd operation machine tools. Proficient in reading micrometre and working to tight tolerances (0.5 tolerances). Able to interpret engineering drawings and specifications. Centreless Grinder Duties: Set and run centreless grinders, with experience running Wickman Scrivener, Ghiringhelli Grinder, Cincinnati or Tschadun Grinder (essential) Experience operating Myford Grinder (desirable) Support 2nd Operations machines safely as required – Thread-rolling (desirable), part markers, drill banks, torque testers and deburrers (manual/rotary etc). Carry out first-off and job run inspection of 2nd Op Machine parts. Adhere to all documented health and safety, with correct PPE used to perform role. Carry out first-off buddy checks and job run inspection of 1st and 2nd Operations machine parts. Reduce scrap/rework reporting back efficiencies to the Production Manager. Maintain machine efficiency to ensure we comply with On Time Deliveries, Arrears, Parts Per Hour (PPH) and Key Performance Indicators (KPIs). Manufacture good quality products in line with agreed standards and quality procedures. Complete daily maintenance check sheets and cycle timesheets. Ensure a safe and clean working environment is always maintained. Centreless Grinder Core Skills/Attributes Needed: Strong understanding of aerospace standards. Set and Run Manual Centre-less Grinders Ability to interpret engineering drawings and specifications. Measurement skills – proficient in reading micrometre and working to tight tolerances. Team Player and communicate with colleagues to ensure the implementation of the company’s policies and goals Attention to detail, including numeracy, and quality performance. Additional Information Employee Benefits including Pension Plan, Health Cash Plan, Life Assurance, EAP and Shopping Discounts. Keywords: Centreless, Grinder, Aerospace, Engineering, Manufacturing, Centrelss Grinder, Wickman Scrivener, Ghiringhelli Grinder, Cincinnati or Tschadun, Lathes, Drilling Tool Maker / Centreless Grinder

Grinder • Seeking an experienced Centreless Grinder to work on components used within the aerospace sector., • Fantastic manufacturing business with excellent company culture, with strong growth expected and excellent tenure amongst the team., • 4 day working week on a dayshift pattern – every Friday off! Excellent opportunity for a Centreless Grinder to work within a precision engineering manufacturer who operate within the aerospace sector. As they continue to grow, the company have now created a position for a Grinder to help increase production. This a fantastic opportunity to join at an exciting time within the business as they look to make the next step to continue their growth. Salary: c£30,000 to £35,000 per annum depending on experience. Pension Plan, Health Cash Plan, Life Assurance, EAP and Shopping Discounts Working hours: Monday to Thursday (Apply online only); 37-hour week (15 minute paid break) The Grinder Responsibilities: • Set and run centreless grinders, with experience running Wickman Scrivener, Ghiringhell, Grinder, Cincinnati or Tschadun Grinder, • Experience operating Myford Grinder (desirable), • Support 2nd Operations machines safely as required – Thread-rolling (desirable), part markers, drill banks, depitching presses, torque testers and deburrers (manual/rotary etc)., • Carry out first-off and job run inspection of 2nd Op Machine parts., • Adhere to all documented health and safety, with correct PPE used to perform role., • Carry out first-off buddy checks and job run inspection of 1st and 2nd Operations machine parts., • Reduce scrap/rework reporting back efficiencies to the Production Manager., • Maintain machine efficiency to ensure we comply with On Time Deliveries, Arrears, Parts Per Hour (PPH) and Key Performance Indicators (KPIs)., • Manufacture good quality products in line with agreed standards and quality procedures., • Complete daily maintenance check sheets and cycle timesheets., • Ensure a safe and clean working environment is always maintained The Grinder Requirements: • Strong understanding of aerospace standards., • Set and Run Manual Centre-less Grinders, • Ability to interpret engineering drawings and specifications., • Measurement skills – proficient in reading micrometre and working to tight tolerances., • Team Player and communicate with colleagues to ensure the implementation of the company’s policies and goals., • Attention to detail, including numeracy, and quality performance. To apply please contact Joe Parker at Euro Projects Recruitment Ltd. Visit the Euro Projects Recruitment website to search our latest permanent, contract and interim vacancies. “Please note that if you are not contacted within the next ten days then your application, on this occasion, has not been successful. We thank you for taking the time to apply.” This job is posted by Euro Projects Recruitment, a recruitment consultancy specialising in engineering and manufacturing appointments from tool room to boardroom. We combine over 100 years of technical knowledge and recruitment expertise to introduce the best candidates to the best companies. We are passionate about your future and persistent in our efforts to secure you the right job. Reference: JP-CGR

Job Title: Counterbalance Forklift Driver Location: Rochford, Essex Working Hours: 00:30 AM - 17:00 PM (Monday to Friday) Pay Rate: £14.00 per hour Job Description: We are currently seeking a reliable and experienced Counterbalance Forklift Driver to join our team in Rochford. In this role, you will be responsible for the safe and efficient operation of a counterbalance forklift to move goods around our warehouse and production site. Key Responsibilities: Operating a counterbalance forklift to move, load, and unload goods within the warehouse. Ensuring the safe transportation of materials to and from designated storage areas. Organizing and maintaining stock, ensuring items are stored safely and securely. Performing regular checks and maintenance on the forklift to ensure its safety and efficiency. Assisting with general warehouse duties as required. Following all safety protocols and warehouse procedures to ensure a safe working environment. Ensuring that stock levels are accurately recorded and reported. Requirements: Valid Counterbalance Forklift License (RTITB or ITSSAR accredited). Previous forklift driving experience in a warehouse or similar setting. Good knowledge of health and safety standards. Ability to work in a fast-paced environment. Strong communication skills and the ability to work as part of a team. A proactive attitude with a focus on safety and efficiency. Benefits: Competitive hourly rate of £14.00. Full-time position with consistent working hours. Opportunity to work in a dynamic and supportive team environment. How to Apply: If you have the necessary skills and experience and are looking for a new opportunity, please apply today with your CV. We look forward to hearing from you

CNC SETTER Southend-On-Sea, Essex £30,000 TO £35,000 per annum DOE Permanent position / Full time - 6:45am – 4:30pm Mon – Thurs We are working with an established Engineering company who are looking to grow their team internally with new contracts and workload increase and require an experienced CNC Setter / Operator. Job Role: • Set and Run 1st Operations machinery safely - CNC machines including fixed head, sliding head, Lathes, turning mills and Bar feeders (including Dooson, Hardinge, Mori and Star)., • Support as required, with set and run 2nd Operations machinery safely – thread rollers, grinding, part markers, drill banks, depitching presses, torque testers and deburrers (manual/rotary etc)., • Work confidently with material from Aluminium, stainless steels and Inconel., • Coordination of all programming and setting activities, coordinating with other existing setters., • Carry out first-off and job run inspection of 2nd Op Machine parts., • Adhere to all documented health and safety, with correct PPE used to perform role., • Ensure all clockings and production records are completed accurately, and that the movement of work is recorded on the company computerised system., • Carry out first-off buddy checks and job run inspection of 1st and 2nd Operations machine parts., • Reduce scrap/rework reporting back efficiencies to the Production Manager., • Maintain machine efficiency to ensure we comply with On Time Deliveries, Arrears, Parts Per Hour (PPH) and Key Performance Indicators (KPIs)., • Manufacture good quality products in line with agreed standards and quality procedures., • Complete daily maintenance check sheets and cycle timesheets., • Ensure a safe and clean working environment is maintained at all times., • Willing to train junior operators to develop skills, when necessary. Benefits are disclosed at interview stage. Person specification: • Able to commute within or to Southend-On-Sea., • Run, Set 1st and 2nd Ops machining tools, with some programming experience., • Experience with bar feed machines., • CNC setting & operating experience is a must! (min. 3 years experienced required)., • Set and Run Machines with Fanuc and Seiki controls., • Attention to detail, including numeracy, and quality performance., • Ability to interpret engineering drawings and specifications., • Service minded and continuous enhancement of product/service knowledge., • Experience of working in the Automotive / Aerospace or Defence Industries is desirable. Important Notice: Noble Recruiting Limited, based in Billericay, Essex, is an equal opportunities employer. With over 17 years of industry experience, we specialise in both permanent recruitment and the provision of temporary workers. By submitting your application, you consent to the processing of your personal data by Noble Recruiting Limited. For further details on how we manage applicant data, please refer to our Privacy Policy available on our website. Application Status: Due to the high volume of applications received, we regret that if you do not hear from us within 14 days, your application has not been successful on this occasion

Class 2 Tanker Drivers urgently needed! FM Conway is seeking skilled Class 2 Tanker Drivers to join our dedicated Water and Drainage Management team. In this vital role, you'll help protect communities and keep essential infrastructure running smoothly. Working independently, you'll be at the front line of drainage operations, carrying out flood management duties, driving a Class 2 Liquid Waste Tanker. This is a full time, permanent role based in Rayleigh, Essex. You will be working a mixture of days and nights. The duties of the Class 2 Tanker Driver role will include: - Operating a Class 2 liquid waste tanker as part of front-line water and drainage operations, safely transporting and handling liquid waste in line with company procedures and legislation - Delivering essential flood management and drainage response services, working independently on site to protect communities and critical infrastructure - Accurately recording and reporting all work carried out, including identifying and flagging any additional issues that require follow-up - Using ourapp-based reporting system to update job progress, upload photos/videos, and ensure clear communication with the wider team What skills and experience do you need? We're looking for reliable, committed individuals who hold a Class 2 licence and a valid Driver CPC. You'll enjoy working independently and demonstrate a strong commitment to health and safety. While previous experience in the drainage industry is preferred, it's not essential, full training can be provided for the right candidate. What benefits will you receive? As our Class 2 Tanker Driver, we will offer you a range of fantastic benefits including career and professional development, 23 days holiday plus bank holidays, company pension, life assurance, opportunities for internal and external training and access to a wide range of shopping discounts through our Rewarding Great People platform. We will also offer you a range of health and well-being benefits including 24-hour advice lines, and support from our in-house mental health first aiders. A brief introduction to FM Conway and the Water and Drainage Division FM Conway is a business of families with over 60 years' experience of creating sustainable and innovative transportation solutions. We pride ourselves on our core values, creating a culture around Care, Innovation, Integrity and Excellence. The heart of FM Conway has, and always will be, its great people and we are always searching for talented individuals to join our family. You'll be joining our Water and Drainage Management Division - one of the fastest-growing and mostinnovative areas of our business. This dynamic division delivers a full range of services, including drainagesurveys, maintenance, and rehabilitation across the entire highway network. As part of this forward-thinking team, you'll be working on the front line of infrastructure maintenance, supported by one of the UK's largest and most technically advanced specialist transport fleets. It's a fantastic opportunity to be part of a team that's not only growing rapidly but also shaping the future of water and drainage solutions. So, if you want to Join our Family as our Class 2 Tanker Driver, click apply today! Closing Date: 25/03/2026 FM Conway is an award-winning equal opportunities employer. We recognise that our workforce should reflect our diverse communities and we are proudly committed to creating an inclusive culture in which we celebrate and value individuals from all walks of life. EDI-Strategy At our heart we are a business that recognises and embraces individuality, so if you are excited about this role but you are unsure if you meet all of the criteria, we encourage you to apply anyway as you may still be the right candidate for this or another role we are recruiting for. We believe in people, not algorithms. That's why every application is personally reviewed by a member of our Recruitment Team - never by AI. We look forward to receiving your application! TPBN1_UKTJ

Grinder Seeking an experienced Centreless Grinder to work on components used within the aerospace sector. Fantastic manufacturing business with excellent company culture, with strong growth expected and excellent tenure amongst the team. 4 day working week on a dayshift pattern every Friday off! Excellent opportunity for a Centreless Grinder to work within a precision engineering manufacturer who operate within the aerospace sector. As they continue to grow, the company have now created a position for a Grinder to help increase production. This a fantastic opportunity to join at an exciting time within the business as they look to make the next step to continue their growth. Salary :c£30,000 to £35,000 per annum depending on experience. Pension Plan, Health Cash Plan, Life Assurance, EAP and Shopping Discounts Working hours: Monday to Thursday 0645-1630; 37-hour week (15 minute paid break) The Grinder Responsibilities: Set and run centreless grinders, with experience running Wickman Scrivener, Ghiringhell, Grinder, Cincinnati or Tschadun Grinder Experience operating Myford Grinder (desirable) Support 2nd Operations machines safely as required Thread-rolling (desirable), part markers, drill banks, depitching presses, torque testers and deburrers (manual/rotary etc). Carry out first-off and job run inspection of 2nd Op Machine parts. Adhere to all documented health and safety, with correct PPE used to perform role. Carry out first-off buddy checks and job run inspection of 1st and 2nd Operations machine parts. Reduce scrap/rework reporting back efficiencies to the Production Manager. Maintain machine efficiency to ensure we comply with On Time Deliveries, Arrears, Parts Per Hour (PPH) and Key Performance Indicators (KPIs). Manufacture good quality products in line with agreed standards and quality procedures. Complete daily maintenance check sheets and cycle timesheets. Ensure a safe and clean working environment is always maintained The Grinder Requirements: Strong understanding of aerospace standards. Set and Run Manual Centre-less Grinders Ability to interpret engineering drawings and specifications. Measurement skills proficient in reading micrometre and working to tight tolerances. Team Player and communicate with colleagues to ensure the implementation of the companys policies and goals Attention to detail, including numeracy, and quality performance . To apply please contact Joe Parker atEuro Projects Recruitment Ltd. Visit the Euro Projects Recruitment website to search our latest permanent, contract and interim vacancies. Please note that if you are not contacted within the next ten days then your application, on this occasion, has not been successful. We thank you for taking the time to apply. This job is posted by Euro Projects Recruitment, a recruitment consultancy specialising in engineering and manufacturing appointments from tool room to boardroom. We combine over 100 years of technical knowledge and recruitment expertise to introduce the best candidates to the best companies. We are passionate about your future and persistent in our efforts to secure you the right job. Reference: JP-CGR TPBN1_UKTJ

Part Time Building Maintenance Technician - Edinburgh - Salary up to £15,500 CBW have a new opportunity to join a leading FM provider on a permanent part time basis working in the Edinburgh region as an experienced Building Maintenance Technician. You will be responsible for small maintenance work

A family-run business in England is seeking a highly organised Finance Assistant for a part-time role.

A large independent health club in Elmbridge is looking for a part-time Maintenance Operative to ensure the facility remains in top condition. Responsibilities include day-to-day maintenance tasks, pool equipment management, and general DIY skills.

Part-time Facility Maintenance Technician I. Respond to facility maintenance work ticket requests and track in maintenance log system. Document information, such as future maintenance needs and plans, in the facility maintenance knowledge base system.

This part-time role offers the potential to increase hours as responsibilities grow. A leading leisure park operator in Essex is seeking experienced Park Operatives for maintenance and reception duties. The ideal candidates will be reliable and self-motivated, capable of performing general maintenan

This part-time role offers excellent flexibility and is suitable for someone knowledgeable in building maintenance. Responsibilities include identifying maintenance issues, supervising contractors, and carrying out maintenance tasks. A professional recruitment agency is seeking a proactive Building

A family-run hardware supplier in the UK is seeking an organized Accounts Assistant for part-time work (26 hours/week).

This part-time role requires maintaining the hotel, spa, and grounds to a high standard, involving various maintenance tasks like plumbing and electrical work. A reputable hospitality company in York is seeking a Maintenance Assistant to join their Facilities team.

This part-time role involves general maintenance duties, performing minor repairs, and ensuring the health and safety of the school premises.

A leading hotel chain in London Lewisham is seeking a Maintenance Team Member to ensure all hotel facilities are functional and visually appealing.

Site Maintenance Officer (part-time, 2 days per week). Ford Park is looking for a Site Maintenance Officer (part-time, 2 days per week) to help keep our charity‑run park safe, accessible and looking lovely for everyone who uses it. This is a hands‑on role working with our Park Director, Gardener

This part-time role offers excellent flexibility and suits someone with a strong knowledge of building maintenance and who has confidence working independently across planned and reactive maintenance tasks. Additional hours available for occasional weekend shifts (Paid Overtime or time off in lieu).

A recruitment agency is looking for a Part-Time Office Administrator to join a team in Essex. Responsibilities include setting up maintenance jobs, preparing quotes, and general office administration.

A marine recruitment agency in North Shields is looking for a Part-Time Maintenance Operative to join their friendly team. You will carry out essential maintenance tasks and ensure the marina is safe and well-presented for visitors. Ideal candidates will have practical experience in maintenance, a f

A local authority in the UK is seeking a part-time Site Assistant to support the Estate Manager and Site Supervisor. Working hours are 20 per week during term time, with flexibility required.

A leading housing services provider in North East England is seeking a part-time Maintenance Planner & Administrator. The ideal candidate has experience in repairs and maintenance, works well under pressure, and possesses strong organizational skills.

A leading dining company in Greater London is seeking a part-time Maintenance Engineer to support their Maintenance Manager and ensure the safety and presentation of their venues. This role involves completing general repairs, supporting maintenance programs, and responding to emergencies. The ideal

A community-focused charity park in the UK is seeking a Site Maintenance Officer to work part-time (2 days per week). This hands-on role involves overseeing the day-to-day maintenance of paths, trails, benches, and signage, coordinating with contractors, and supporting volunteers.

Key Responsibilities: Carry out routine repairs and maintenance across communal areas and tenanted properties Complete void works including repairs, maintenance and installation of furniture to ensure properties are ready to re‑let Conduct daily building checks and support scheduled health and saf

Responsibilities and Duties: Respond promptly and effectively to guest and staff maintenance requests Conduct daily inspections of public and guest areas Carry out preventative and corrective maintenance works Maintain mechanical and plant areas in a safe and orderly condition General maintenance of

Key Responsibilities: Carry out routine repairs and maintenance across communal areas and tenanted properties Complete void works including repairs, maintenance and installation of furniture to ensure properties are ready to re‑let Conduct daily building checks and support scheduled health and saf

Maintenance Operative needed to maintain the care home, ensuring safety and functionality through repairs and projects.

The Maintenance Operative will conduct inspections, maintenance, and repairs of building systems, ensuring a safe and functional environment for members and staff.

Job: Caretaker (Temp Work)Location: LincolnshireWe need a caretaker in Lincolnshire.You'll be doing stuff like unlocking and locking up, keeping things clean and safe, small fixes, and helping out where needed.Shifts:- Mornings- Afternoons- Full daysYou must be okay with working any of these.You Nee

Full-time, Term Time Only (with some flexibility during school holidays). Previous experience in a caretaker, site supervisor, or facilities/maintenance role. Good knowledge of basic maintenance, health & safety, and security procedures.

We’re on the lookout for a General Assistant (Cleaner) who takes pride in their work and wants to be part of a fast-growing fitness brand.