Trabajos parts en HitchinCrear alertas

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £45,378 (inclusive of London Weighting Allowance, if applicable), with on-target earnings of up to £57,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: • Level 2 qualification in Light Vehicle Maintenance (or equivalent), • Minimum 2 years’ experience as a vehicle technician working on light vehicles, • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £45,370, with the opportunity to increase your earnings up to £57,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £45,378 (inclusive of London Weighting Allowance, if applicable), with on-target earnings of up to £57,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: • Level 2 qualification in Light Vehicle Maintenance (or equivalent), • Minimum 2 years’ experience as a vehicle technician working on light vehicles, • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £45,370, with the opportunity to increase your earnings up to £57,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £45,378 (inclusive of London Weighting Allowance, if applicable), with on-target earnings of up to £57,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: • Level 2 qualification in Light Vehicle Maintenance (or equivalent), • Minimum 2 years’ experience as a vehicle technician working on light vehicles, • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £45,370, with the opportunity to increase your earnings up to £57,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Become a Driving Instructor – Nationwide | Earn Up to £50,000+ with My Four Wheels \n Looking for a new career with flexibility, independence and great earning potential? My Four Wheels is a 5-star rated driving school with 500 instructors already on the road nationwide — and we’re expanding across the UK. \n This opportunity is ideal for anyone considering a career change. You don’t need previous instructing experience — just a professional attitude, good people skills and the willingness to learn. We’ll train you from the start and guide you all the way to becoming an Approved Driving Instructor (ADI). \n Why this opportunity stands out \n Excellent Earning Potential (£38/hour typical lesson rates) Lesson rates average around £38 per hour, supporting strong income whether you work part-time or full-time. For example, working 32 hours per week can deliver earnings up to £39k per year, and those working 40hrs have the opportunity to reach £50,000+. \n Total Flexibility You decide when you work — mornings, evenings, weekends, or a full-time diary. It’s a career that fits around your life. \n Local Work, Less Travel Most instructors teach within 30 minutes of home, typically covering 6–8 postcodes, helping you maximise teaching time and reduce travel. \n Earn While You Train After passing DVSA Part 2, you are able to apply for a trainee licence, allowing you to begin teaching and earning sooner while completing the final stage of qualification. \n New Training Academy – Full Support Built In Our new Training Academy provides a structured route through DVSA Parts 1, 2 and 3, combining: \n\n • Flexible online learning for theory and preparation\n, • In-car coaching to build driving and teaching ability\n, • Live classroom sessions for extra guidance and confidence\n, • Lesson plans, resources and ongoing support to help you succeed\n\n Dual-Control Vehicle Options We can support you with access to dual-control car options through established providers, including new and nearly-new models such as Ford Puma, Renault Clio, MG3 and Vauxhall Corsa, subject to availability. \n A Rewarding Career You’ll help learners gain independence, improve road safety, and experience the satisfaction of seeing students pass and succeed. \n Training Fees Paid Back in Full All instructors pay for training. Training fees can be paid back in full after you have worked with us for 1 year (ask for details). \n Eligibility (DVSA Requirements) To apply, you must: \n\n • Hold a full UK driving licence for at least 3 years\n, • Have no more than 5 penalty points\n, • Have no bans in the last 5 years\n, • Be reliable, patient, and confident communicating with people\n\n Apply Now Submit your details today and our team will contact you to explain the training route, timescales and how quickly you can get started.

Producing parts of a complex Seeker model including modelling the target scenario, seeker hardware and processor algorithms. World Class Defence Organisation based in Stevenage and Bristol is currently looking to recruit a Systems Performance Modelling Engineer subcontractor on an initial 12 month c

Mobile Vehicle Technician\nLocation: Stevenage\nSalary: £40,170 basic per annum, OTE £52,000 & overtime 1.5 / A guaranteed overtime option to increase your base salary to £44,385\nHours: 40 hours weekly, Monday to Friday 8.30am – 5.00pm, 1 in 4 Saturday's\nRef - 25917\n\nWe have exciting new opportunities for Mobile Vehicle Technicians. We are recruiting across Stevenage so we will tailor the area to you based on your location.\nThis Mobile Vehicle Technician / Roadside Technician is working for one of the UK’s leading vehicle breakdown companies who provider a first-class service to thousands of customers. Looking for people to start ASAP!! Exceptional company to work for with a wide range of benefits including starting your day as soon as you start the van.\n\nFantastic benefits package that includes:\nEarnings That Motivate - enjoy a market-competitive base salary of £40170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability\nOpt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward.\nTools to Drive Your Future - get started with a free Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings.\nTime Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitmentsFinancial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term.\nWellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it.\nExtras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success.\n\nMobile Vehicle Technician / Roadside Technician role:\n• Working closely with the breakdown team you will be tasked with attending breakdowns to diagnose issues they have. Working on the vehicles to ideally get them back on the road otherwise making sure the vehicle goes back to the workshop.\n• Identifying problems and advising the customer on the vehicle’s issues.\n• Vehicle servicing & general maintenance including electrical & vehicle Diagnostics.\n• Mobile Vehicle Technician / Roadside Technician are the face of the business so its important you deliver exceptional Customer Service.\n\nMobile Vehicle Technician Requirements: \n\nWe ideally want Level 3 in Vehicle maintenance and Repair however we would consider level 2 vehicle Maintenance and repair. Open to equivalent qualifications such as City and Guilds vehicle Maintenance, IMI or NVQ. Must be able to show your qualifications\nMinimum 2 years experience within the vehicle workshop or working as a Mobile Vehicle Technician\nA full UK driving licence - no more than 7 points or bans on the licence\nAbility to demonstrative technical, electrical, and diagnostic experience\nConsultant – Jason Evans - Octane Recruitment\n\nJEVT\n\nOctane Recruitment is a specialist Automotive and Motor Trade recruitment agency, working with main dealerships, bodyshops, tyre management companies, parts distribution centres, independent garages, fleet operators, HGV companies, import centres and manufacturers across the UK. We recruit across the motor trade and related industries

An opportunity has arisen with my client for a Principal Mechanical Design Engineer to join them on a 6 -month contract. As the Principal Mechanical Design Engineer you will develop products to meet customer's needs. You will perform a range of engineering activities including progressing developmental designs into production environments and working with suppliers on technical queries. Role: Principal Mechanical Design Engineer Pay: £40 -£50 per hour via umbrella Location: Stevenage or Bristol Contract: 6months Hours: Monday - Friday, 37 hours per week Security Clearance: Security Cleared however can start on BPSS, UK Eyes only Carry out Mechanical Design and proving activities as part of a wider team for prime and variant products, of both piece parts and assemblies. Support/liaise with manufacturing, resolving manufacturing problems & defects. Support to functional & environmental testing and trials. Liaise with suppliers/purchasing to resolve any technical queries that may arise. Planning and reporting on own day-to-day activities to meet project milestones. Gain clarification of and help to generate requirements, including challenging of extraneous requirements to reduce lead time, UPC and design complexity Skills/Experince Experience using Creo 3D design tool An appreciation of other engineering areas/domains Knowledge of several of the following: Manufacturing processes Tolerance studies *...

Guidant Global has partnered with a world-renowned leader in defence and missile technology, a trusted collaborator of the UK's Ministry of Defence. They are seeking a skilled Systems Modelling Engineer to develop models of the seeker RF Radar. This role involves creating models that encompass the seeker hardware, digital processing, and target environment. The modelling team will be responsible for developing the model, producing auto-code, generating seeker performance predictions, and integrating the seeker model with the missile dynamic reference model. What we're looking for: Essential Tools: MATLAB Simulink Multi-skilled team Skills: The ideal candidate should have experience in modelling for auto-coding. Assessing the suitability of algorithms in the Model Aptitude for converting an algorithm into a Simulink model (desirable) Understanding with Radar and Control Systems (desirable) Familiarity with Digital Signal Processing (desirable) RF and Model delivery experience (desirable) Technical report writing Capability to work as part of a fast-paced team What you'll get to do as a Systems Modelling Engineer: Utilise model-based design techniques to perform modelling in MATLAB and Simulink. Responsible for modelling parts of a complex seeker system, including the target scenario, seeker hardware, and processor algorithms. Developing and implementing algorithms within the model. Producing and verifying a...

Become a Driving Instructor – Nationwide | Earn Up to £50,000+ with My Four Wheels Looking for a new career with flexibility, independence and great earning potential? My Four Wheels is a 5-star rated driving school with 500 instructors already on the road nationwide — and we’re expanding across the UK. We’ll train you from the start and guide you all the way to becoming an Approved Driving Instructor (ADI). Excellent Earning Potential (£38/hour typical lesson rates) Lesson rates average around £38 per hour, supporting strong income whether you work part-time or full-time. You decide when you work — mornings, evenings, weekends, or a full-time diary. Local Work, Less Travel Most instructors teach within 30 minutes of home, typically covering 6–8 postcodes, helping you maximise teaching time and reduce travel. After passing DVSA Part 2, you are able to apply for a trainee licence, allowing you to begin teaching and earning sooner while completing the final stage of qualification. New Training Academy – Full Support Built In Our new Training Academy provides a structured route through DVSA Parts 1, 2 and 3, combining: Flexible online learning for theory and preparation In-car coaching to build driving and teaching ability Lesson plans, resources and ongoing support to help you succeed We can support you with access to dual-control car options through established providers, including new and nearly-new models such as Ford Puma, Renault Clio, MG3 and Vauxhall Corsa, subject to availability. You’ll help learners gain independence, improve road safety, and experience the satisfaction of seeing students pass and succeed. Training Fees Paid Back in Full All instructors pay for training. Training fees can be paid back in full after you have worked with us for 1 year (ask for details). Hold a full UK driving licence for at least 3 years Submit your details today and our team will contact you to explain the training route, timescales and how quickly you can get started.

Become a Driving Instructor – Nationwide | Earn Up to £50,000+ with My Four Wheels Looking for a new career with flexibility, independence and great earning potential? My Four Wheels is a 5-star rated driving school with 500 instructors already on the road nationwide — and we’re expanding across the UK. This opportunity is ideal for anyone considering a career change. You don’t need previous instructing experience — just a professional attitude, good people skills and the willingness to learn. We’ll train you from the start and guide you all the way to becoming an Approved Driving Instructor (ADI). Why this opportunity stands out Excellent Earning Potential (£38/hour typical lesson rates) Lesson rates average around £38 per hour , supporting strong income whether you work part-time or full-time. For example, working 32 hours per week can deliver earnings up to £39k per year , and those working 40hrs have the opportunity to reach £50,000+ . Total Flexibility You decide when you work — mornings, evenings, weekends, or a full-time diary. It’s a career that fits around your life. Local Work, Less Travel Most instructors teach within 30 minutes of home , typically covering 6–8 postcodes , helping you maximise teaching time and reduce travel. Earn While You Train After passing DVSA Part 2, you are able to apply for a trainee licence , allowing you to begin teaching and earning sooner while completing the final stage of qualification. New Training Academy – Full Support Built In Our new Training Academy provides a structured route through DVSA Parts 1, 2 and 3, combining: • Flexible online learning for theory and preparation, • In-car coaching to build driving and teaching ability, • Live classroom sessions for extra guidance and confidence, • Lesson plans, resources and ongoing support to help you succeed Dual-Control Vehicle Options We can support you with access to dual-control car options through established providers, including new and nearly-new models such as Ford Puma, Renault Clio, MG3 and Vauxhall Corsa , subject to availability. A Rewarding Career You’ll help learners gain independence, improve road safety, and experience the satisfaction of seeing students pass and succeed. Training Fees Paid Back in Full All instructors pay for training. Training fees can be paid back in full after you have worked with us for 1 year ( ask for details ). Eligibility (DVSA Requirements) To apply, you must: • Hold a full UK driving licence for at least 3 years, • Have no more than 5 penalty points, • Have no bans in the last 5 years, • Be reliable, patient, and confident communicating with people Apply Now Submit your details today and our team will contact you to explain the training route, timescales and how quickly you can get started.

Become a Driving Instructor – Nationwide | Earn Up to £50,000+ with My Four Wheels Looking for a new career with flexibility, independence and great earning potential? My Four Wheels is a 5-star rated driving school with 500 instructors already on the road nationwide — and we’re expanding across the UK. We’ll train you from the start and guide you all the way to becoming an Approved Driving Instructor (ADI). Excellent Earning Potential (£38/hour typical lesson rates) Lesson rates average around £38 per hour, supporting strong income whether you work part-time or full-time. You decide when you work — mornings, evenings, weekends, or a full-time diary. Local Work, Less Travel Most instructors teach within 30 minutes of home, typically covering 6–8 postcodes, helping you maximise teaching time and reduce travel. After passing DVSA Part 2, you are able to apply for a trainee licence, allowing you to begin teaching and earning sooner while completing the final stage of qualification. New Training Academy – Full Support Built In Our new Training Academy provides a structured route through DVSA Parts 1, 2 and 3, combining: Flexible online learning for theory and preparation In-car coaching to build driving and teaching ability Lesson plans, resources and ongoing support to help you succeed We can support you with access to dual-control car options through established providers, including new and nearly-new models such as Ford Puma, Renault Clio, MG3 and Vauxhall Corsa, subject to availability. You’ll help learners gain independence, improve road safety, and experience the satisfaction of seeing students pass and succeed. Training Fees Paid Back in Full All instructors pay for training. Training fees can be paid back in full after you have worked with us for 1 year (ask for details). Hold a full UK driving licence for at least 3 years Submit your details today and our team will contact you to explain the training route, timescales and how quickly you can get started.

World Class Defence Organisation is currently looking to recruit a Component Engineer / Components Cataloguer subcontractor on an initial 6 month contract. This position requires experience of components and parts, MS tools, eye for detail, able to deal with multiple queries in a support environment The role will be predominantly working from home with just 1-2 days a week in the office. Your office base can be either Stevenage or Bolton (depending on your preference). Contract Duration: 6 months initially and then ongoing. Hourly Rate: £50 per hour (Umbrella) Component Engineer Job Description: The Component Engineering department play an important support role not just within the engineering group but also within the wider business. You will be part of a multi-disciplined team completing administration activities, technical advisement, making requests to suppliers and responding to internal queries. You will ensure we deliver a comprehensive component service offering technical advice and ensuring accuracy of data. Responsibilities: Role includes the following responsibilities: Processing and responding to support queries Processing component data (based on Life cycle status, Export Control and REACH/RoHS compliance) Working within departmental processes completing administration tasks Support for Electronic, Electrical, Mechanical or Material commodities Support...

Morson is delighted to be working in partnership with a market leading Defence organisation to recruit a Component Engineer for an initial 6 Month contract. There is a rate of up to £50 per hour Umbrella on offer for the successful candidate. The role would offer hybrid working with 1-2 days a week required onsite in either Stevenage or Bolton and the remaining days working from home. Please find the job spec. below: The Component Engineering department play an important support role not just within the engineering group but also within the wider business. You will be part of a multi-disciplined team completing administration activities, technical advisement, making requests to suppliers and responding to internal queries. You will ensure we deliver a comprehensive component service offering technical advice and ensuring accuracy of data. Responsibilities: Role includes the following responsibilities: • Processing and responding to support queries, • Processing component data (based on Life cycle status, Export Control and REACH/RoHS compliance), • Working within departmental processes completing administration tasks, • Support for Electronic, Electrical, Mechanical or Material commodities, • Support continuous improvement activities Skillset/experience required: • Knowledge and experience of components and parts

Advanced Steel Draughtsman Location: Hitchin Salary: £45,000 to £50,000 per annum Job Type: Full time, office based (5 days per week) We are seeking an experienced Advanced Steel Draughtsman to join our team in Hitchin. This is an excellent opportunity for a skilled professional with a strong background in architectural and structural steelwork to contribute to a collaborative and high performing environment. Requirements Minimum 3 to 5 years’ experience using Autodesk Advanced Steel Proven experience in architectural steel, structural steel and building envelope interfaces Strong ability to produce accurate 3D models and detailed drawings for approval, fabrication and installation Experience coordinating with clients, engineers, project managers and fabrication teams Key Responsibilities Interpret design intent from architects’ drawings alongside Contracts Managers Produce general arrangement drawings and typical details for client approval and structural engineer review Revise drawings in line with client feedback and engineering requirements Prepare and issue fabrication drawings including single parts, assemblies, installation drawings and bills of materials Ongoing Duties Liaise with Contracts Managers and workshop teams to resolve fabrication, assembly and site queries Collaborate with the design team to support peer reviews and conti...

Goods Inwards Inspector 12 month contract Based in Stevenage Offering £28.71ph Inside IR35 Do you have goods in inspection experience? Do you have experience with SAP? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Goods Inwards Inspector, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Ensuring that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects., • Verify and accept procured products in line with contractual conditions., • Practiced in reading and understanding assembly drawings with due regard to dimensional tolerances and machining., • Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first-off inspections., • Produce relevant inspection/quality control documentation., • Check and complete all paperwork associated with the delivered article., • Ensure inspection times are met., • Contr...

World Class Defence Organisation based in Stevenage, Hertfordshire is currently looking to recruit a Goods Inwards Inspector subcontractor on an initial 12 month contract. Experience specifically required: • Must have goods in inspection experience., • Apprenticeship required. Contract Duration: 12 Months initially and then ongoing. Hourly Rate: £28.71. Overtime Rate of time and a quarters of hours over 37 hours per week. Goods Inwards Inspector Job Description: • The role of the Goods Inwards Inspector is to ensure that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects., • Verify and accept procured product in line with contractual conditions., • Practiced in reading and understanding assembly drawings with due regards to dimensional tolerances and machined., • Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first off inspections., • Produce relevant inspection/quality control documentation., • Check and complete all paperwork associated with the delivered article., • Ensure inspections times are met., • Control defect items via segregation from good product. Raise and maintain relevant defect repo...

Goods Inwards Inspector 12 month contract Based in Stevenage Offering £28.71ph Inside IR35 Do you have goods in inspection experience? Do you have experience with SAP? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Goods Inwards Inspector, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Ensuring that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects. Verify and accept procured products in line with contractual conditions. Practiced in reading and understanding assembly drawings with due regard to dimensional tolerances and machining. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first-off inspections. Produce relevant inspection/quality control documentation. Check and complete all paperwork associated with the delivered article. Ensure inspection times are met. Control defect items via segregation from good products. Raise and maintain relevant defect reports. Maintain product verification approval process via regular audits. Inspection of PCB Ensure comp...

Job Title: Mechanical Design Engineer Location: Stevenage 4 days on-site per week Role Type: Contract Duration: Initial 6 months+ Rate: £50.00 per hour - Inside IR35 Our client, an established defence manufacturer, require an experienced Mechanical Design Engineer to join their multi-disciplined team in Stevenage. UK citizenship is mandatory to be able to clear the background checks and obtain SC clearance. Current valid SC clearance would be an advantage. What the role of the Mechanical Design Engineer entails: • Carry out Mechanical Design and proving activities as part of a wider team for prime and variant products, of both piece parts and assemblies., • Support/liaise with manufacturing, resolving manufacturing problems & defects., • Support to functional & environmental testing and trials., • Liaise with suppliers/purchasing to resolve any technical queries that may arise., • Planning and reporting on own day-to-day activities to meet project milestones., • Gain clarification of and help to generate requirements, including challenging of extraneous requirements to reduce lead time, UPC and design complexity What experience you need to be the successful Mechanical Design Engineer: • Experience using Creo 3D design tool

Motor Vehicle Technician Full Time/Permanent Monday - Friday 1 in 4 Saturdays (Morning shift) Salary between £30,000 - £40,000 The Role of a Vehicle Technician: Carry out services on specific makes and models of vehicles Perform maintenance and repairs on customer vehicles - such as oil changes, fluid level checks, and tire rotation Identify issues with vehicles using the diagnostic equipment General maintenance and repairs Brakes checks and changes (pads and discs) Suspension work Repairs on lights Repairing and replacing exhausts Repairing and replacing clutches Dealing with gearboxes Plan and keep up to date records of repair procedures using charts manuals and experience. Test the functionality of parts and systems once repairs are completed Vehicle Technician Requirements: NVQ/City & Guilds/IMI certifications required to Level 3 or Level 2 accepted with a minimum of 5 years services Time served - 5 Years+ * Hold a full valid driver license...

Jackson Hogg have exclusively partnered with a specialist manufacturing business in the Hitchin area, on a Quality Engineer position, reporting to the Head of Quality. The Quality Engineer will play a key part within the Quality team, ensuring that the specialist products meet the highest standards of quality, reliability, and regulatory compliance. Quality Engineer Responsibilities Investigate product non‑conformances using structured methodologies (5‑Why, 8D, Ishikawa), driving robust corrective and preventive actions. Support Material Review Board activities—inspecting, assessing and dispositioning non‑conforming parts and assemblies. Work closely with Production and Engineering to ensure inspection, calibration and verification processes remain capable and compliant. Perform supplier evaluations, audits, and ongoing performance reviews to ensure adherence to specifications, certifications and quality expectations. Lead supplier‑related problem‑solving activities, ensuring timely and effective containment, root‑cause analysis and corrective actions. Monitor supplier KPIs (delivery performance, PPM, right‑first‑time), identify trends and drive targeted improvement initiatives. * Maintain documentation and processes aligned to the business' Integrated Management System (ISO 9001, ISO 14001, ISO 45001, ATEX 80079‑34, CAA Part...

An opportunity has arisen with my client for a Goods Inwards Inspector to join them on an initial 12 -month contract. As the Goods Inwards Inspector, you will ensure that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects. Role: Goods Inwards Inspector Pay: £28.71 per hour via Umbrella Company Location: Stevenage Contract: 12 Months Hours: Monday - Friday, 37 hours per week Security Clearance: Security Cleared Responsibilities: Verify and accept procured product in line with contractual conditions. Practiced in reading and understanding assembly drawings with due regards to dimensional tolerances and machined. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first off inspections. Produce relevant inspection/quality control documentation. Check and complete all paperwork associated with the delivered article. Ensure inspections times are met. Control defect items via segregation from good product. Raise and maintain relevant defect reports. Maintain product verification approval process via regular audits. Inspection of PCBs Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain to the highest level, workmanship standards and product quality. Contribute to the maintenance of an orderly and safe working environment. Skillset/experience required: ...

My Four Wheels is a 5-star rated driving school with 500 instructors teaching nationwide - and due to record learner demand, we're now recruiting new Trainee Driving Instructors across the UK. If you're looking for a career change with great earning potential, flexible working, and genuine job satisfaction, this could be the opportunity you've been waiting for. No previous experience is required - we provide full training and ongoing support. Why become a driving instructor with My Four Wheels? Lesson rates typically average around £38 per hour Earn up to £39k per year working 32 hours/week Working 40 hours/weeks will earn an average of £50,000+ Work the hours you want - weekdays, evenings, weekends, part-time or full-time Teach locally (typically within a 30-minute radius, covering 6–8 postcodes) Dual-control car options available via partner providers Start earning sooner – You can apply for a Trainee License after DVSA Part 2 Training fees can be paid back in full after 1 year (ask for details) New Training Academy – Full Training Provided You'll train through our new Training Academy, designed for complete beginners. Training combines online learning, live classroom support and structured in-car coaching. We guide you through DVSA Parts 1, 2 and 3 and provide lesson plans, resources and ongoing support to help you qualify with confidence. DVSA Requirements To apply, you must: Hold a full UK driving licence for 3+ years Have no more than 5 penalty points Have no driving bans in the last 5 years Apply today Submit your details now and our team will contact you to explain the training route, timescales and next steps.

World Class Defence Organisation is currently looking to recruit a Component Engineer / Components Cataloguer subcontractor on an initial 6 month contract.This position requires experience of components and parts, MS tools, eye for detail, able to deal with multiple queries in a support environment.

My Four Wheels is a 5-star rated driving school with 500 instructors teaching nationwide - and due to record learner demand, we're now recruiting new Trainee Driving Instructors across the UK. If you're looking for a career change with great earning potential, flexible working, and genuine job satisfaction, this could be the opportunity you've been waiting for. No previous experience is required - we provide full training and ongoing support. Why become a driving instructor with My Four Wheels? Lesson rates typically average around £38 per hour Earn up to £39k per year working 32 hours/week Working 40 hours/weeks will earn an average of £50,000+ Work the hours you want - weekdays, evenings, weekends, part-time or full-time Teach locally (typically within a 30-minute radius, covering 6–8 postcodes) Dual-control car options available via partner providers Start earning sooner – You can apply for a Trainee License after DVSA Part 2 Training fees can be paid back in full after 1 year (ask for details) New Training Academy – Full Training Provided You'll train through our new Training Academy, designed for complete beginners. Training combines online learning, live classroom support and structured in-car coaching. We guide you through DVSA Parts 1, 2 and 3 and provide lesson plans, resources and ongoing support to help you qualify with confidence. DVSA Requirements To apply, you must: Hold a full UK driving licence for 3+ years Have no more than 5 penalty points Have no driving bans in the last 5 years Apply today Submit your details now and our team will contact you to explain the training route, timescales and next steps.

World Class Defence Organisation based in Stevenage, Hertfordshire is currently looking to recruit an RF Design Engineer subcontractor on an initial 12 month contract. This role would suit a candidate who comes from a strong background working as an RF Designer, Microwave Design Engineer or RF Systems Engineer. Any previous experience of Advanced Design System (ADS) or Cadence would be great. Hourly Rate: £75ph (Umbrella) Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) RF Design Engineer Job Description: The successful candidate will be the designer for specific RF electronics designs. Interfaces to various stakeholders, such as the Datalink core team, Design Authority and other functional entities will need to be managed effectively to ensure the designs are delivered in a timely manner and will integrate to the other parts of the system Responsibilities: The role is substantially technical and hand on testing and proving is essential. Collaborative working with other functions, in particular Software & Firmware Engineering, Mechanical Engineering, Production and Future Systems. Responsibilities: The role is substantially technical and hand on testing and proving is essential. Collaborative working with other functions, in particular Software & Firmware Engineering, Mechanical Engineering, Production and Future Systems. Skillset/experience required: Any previous ...

Role: SMT Operator Location: Stevenage Salary : Competitive DOE Overview We are currently looking for an SMT Operator to join a busy and well-established electronics manufacturing environment. Working as part of the SMT team, you will be responsible for operating and maintaining surface mount production lines, ensuring machines run efficiently and products are manufactured to the highest quality standards. This is a great opportunity to join a growing business with multiple SMT lines and ongoing investment in equipment and training. Key Responsibilities Operate and monitor SMT production lines, ensuring output meets daily production schedules Set up and run pick and place machines (Samsung SM Series) and reflow ovens Carry out visual inspections before and after production in line with IPC-A-610 standards Identify and escalate any quality issues from AOI, test, or inspection stages Load and verify components including resistors, capacitors, diodes, and other electronic parts onto PCBs Operate solder paste printing equipment and ensure correct application processes Support hand placement and rework where required Perform routine machine checks and basic maintenance to ensure optimal performance Follow all standard operating procedures to maintain consistency and quality Ensure compliance with AS9100 / ISO9001 quality standards Adhere to all health, safety, and environmental procedures Skills & Experience Essential ...

My client is seeking a proactive and versatile Logistics & Warehouse Administrator to join our team. This primarily office-based role requires a hands-on approach, supporting warehouse operations and occasional delivery duties as needed. The successful candidate will have strong systems knowledge, excellent organisational skills, and the flexibility to assist across multiple areas of the business. Day-to-day of the role: Administration & Systems • Accurately process customer orders for parts using internal systems., • Maintain and update stock and order records., • Input, track and manage purchase orders and sales orders., • Ensure data accuracy across systems and documentation., • Generate reports and assist with inventory tracking., • Liaising with Engineers for parts to fulfil Service contracts Warehouse Support • Assist with receiving, checking and storing goods., • Support picking, packing and dispatch of orders., • Ensure warehouse operations run efficiently and safely. Logistics & Deliveries • Support coordination of deliveries and shipments., • Occasionally undertake deliveries when required., • Liaise with engineers, couriers and suppliers. Customer & Internal Communication • Communicate effectively with...

MET Technician Location: Preston Annual Salary: Up to £55,000 per year Hours: Monday to Friday Benefits: 33 Days Holiday, Paid Breaks, Health care and insurance discounts and many more Job Description: Our client is looking for a talented and efficient MET Strip Fitter / MET Technician to join this leading team. You will be repairing damaged vehicles in line with manufacturers' specifications within a state-of-the-art body shop, utilising modern equipment and techniques. Qualifications Required for an MET Strip Fitter / MET Technician Will have served a recognised apprenticeship as a MET Strip Fitter / MET Technician and gained a technical qualification (such as NVQ / ATA / IMI / SVQ) Must have previous experience working as a MET Technician / MET Strip Fitter within a busy body shop Strong team player with self-motivation to earn bonus hours Experience with Geometry work and 4-wheel alignment Sound up-to-date knowledge of vehicle repair techniques Diagnostic training Duties of an MET Strip Fitter / MET Technician: Work efficiently in a fast-paced accident repair centre Follow correct repair techniques and work to factory specifications Conduct detailed inspections to diagnose mechanical and electrical issues Repair or replace damaged mechanical, electrical, and trim components Disassemble and reassemble vehicle parts as required Use diagnostic tools to identify and fix ...

Become a Driving Instructor – Nationwide | Earn Up to £50,000+ with My Four Wheels Looking for a new career with flexibility, independence and great earning potential? My Four Wheels is a 5-star rated driving school with 500 instructors already on the road nationwide — and we’re expanding across the UK. This opportunity is ideal for anyone considering a career change. You don’t need previous instructing experience — just a professional attitude, good people skills and the willingness to learn. We’ll train you from the start and guide you all the way to becoming an Approved Driving Instructor (ADI). Why this opportunity stands out Excellent Earning Potential (£38/hour typical lesson rates) Lesson rates average around £38 per hour , supporting strong income whether you work part-time or full-time. For example, working 32 hours per week can deliver earnings up to £39k per year , and those working 40hrs have the opportunity to reach £50,000+ . Total Flexibility You decide when you work — mornings, evenings, weekends, or a full-time diary. It’s a career that fits around your life. Local Work, Less Travel Most instructors teach within 30 minutes of home , typically covering 6–8 postcodes , helping you maximise teaching time and reduce travel. Earn While You Train After passing DVSA Part 2, you are able to apply for a trainee licence , allowing you to begin teaching and earning sooner while completing the final stage of qualification. New Training Academy – Full Support Built In Our new Training Academy provides a structured route through DVSA Parts 1, 2 and 3, combining: • Flexible online learning for theory and preparation, • In-car coaching to build driving and teaching ability, • Live classroom sessions for extra guidance and confidence, • Lesson plans, resources and ongoing support to help you succeed Dual-Control Vehicle Options We can support you with access to dual-control car options through established providers, including new and nearly-new models such as Ford Puma, Renault Clio, MG3 and Vauxhall Corsa , subject to availability. A Rewarding Career You’ll help learners gain independence, improve road safety, and experience the satisfaction of seeing students pass and succeed. Training Fees Paid Back in Full All instructors pay for training. Training fees can be paid back in full after you have worked with us for 1 year ( ask for details ). Eligibility (DVSA Requirements) To apply, you must: • Hold a full UK driving licence for at least 3 years, • Have no more than 5 penalty points, • Have no bans in the last 5 years, • Be reliable, patient, and confident communicating with people Apply Now Submit your details today and our team will contact you to explain the training route, timescales and how quickly you can get started.

Become a Driving Instructor – Nationwide | Earn Up to £50,000+ with My Four Wheels Looking for a new career with flexibility, independence and great earning potential? My Four Wheels is a 5-star rated driving school with 500 instructors already on the road nationwide — and we’re expanding across the UK. We’ll train you from the start and guide you all the way to becoming an Approved Driving Instructor (ADI). Excellent Earning Potential (£38/hour typical lesson rates) Lesson rates average around £38 per hour, supporting strong income whether you work part-time or full-time. You decide when you work — mornings, evenings, weekends, or a full-time diary. Local Work, Less Travel Most instructors teach within 30 minutes of home, typically covering 6–8 postcodes, helping you maximise teaching time and reduce travel. After passing DVSA Part 2, you are able to apply for a trainee licence, allowing you to begin teaching and earning sooner while completing the final stage of qualification. New Training Academy – Full Support Built In Our new Training Academy provides a structured route through DVSA Parts 1, 2 and 3, combining: Flexible online learning for theory and preparation In-car coaching to build driving and teaching ability Lesson plans, resources and ongoing support to help you succeed We can support you with access to dual-control car options through established providers, including new and nearly-new models such as Ford Puma, Renault Clio, MG3 and Vauxhall Corsa, subject to availability. You’ll help learners gain independence, improve road safety, and experience the satisfaction of seeing students pass and succeed. Training Fees Paid Back in Full All instructors pay for training. Training fees can be paid back in full after you have worked with us for 1 year (ask for details). Hold a full UK driving licence for at least 3 years Submit your details today and our team will contact you to explain the training route, timescales and how quickly you can get started.

Become a Driving Instructor – Nationwide | Earn Up to £50,000+ with My Four Wheels Looking for a new career with flexibility, independence and great earning potential? My Four Wheels is a 5-star rated driving school with 500 instructors already on the road nationwide — and we’re expanding across the UK. We’ll train you from the start and guide you all the way to becoming an Approved Driving Instructor (ADI). Excellent Earning Potential (£38/hour typical lesson rates) Lesson rates average around £38 per hour, supporting strong income whether you work part-time or full-time. You decide when you work — mornings, evenings, weekends, or a full-time diary. Local Work, Less Travel Most instructors teach within 30 minutes of home, typically covering 6–8 postcodes, helping you maximise teaching time and reduce travel. After passing DVSA Part 2, you are able to apply for a trainee licence, allowing you to begin teaching and earning sooner while completing the final stage of qualification. New Training Academy – Full Support Built In Our new Training Academy provides a structured route through DVSA Parts 1, 2 and 3, combining: Flexible online learning for theory and preparation In-car coaching to build driving and teaching ability Lesson plans, resources and ongoing support to help you succeed We can support you with access to dual-control car options through established providers, including new and nearly-new models such as Ford Puma, Renault Clio, MG3 and Vauxhall Corsa, subject to availability. You’ll help learners gain independence, improve road safety, and experience the satisfaction of seeing students pass and succeed. Training Fees Paid Back in Full All instructors pay for training. Training fees can be paid back in full after you have worked with us for 1 year (ask for details). Hold a full UK driving licence for at least 3 years Submit your details today and our team will contact you to explain the training route, timescales and how quickly you can get started.

My Four Wheels is a 5-star rated driving school with 500 instructors teaching nationwide - and due to record learner demand, we're now recruiting new Trainee Driving Instructors across the UK. If you're looking for a career change with great earning potential, flexible working, and genuine job satisfaction, this could be the opportunity you've been waiting for. No previous experience is required - we provide full training and ongoing support. Why become a driving instructor with My Four Wheels? Lesson rates typically average around £38 per hour Earn up to £39k per year working 32 hours/week Working 40 hours/weeks will earn an average of £50,000+ Work the hours you want - weekdays, evenings, weekends, part-time or full-time Teach locally (typically within a 30-minute radius, covering 6–8 postcodes) Dual-control car options available via partner providers Start earning sooner – You can apply for a Trainee License after DVSA Part 2 Training fees can be paid back in full after 1 year (ask for details) New Training Academy – Full Training Provided You'll train through our new Training Academy, designed for complete beginners. Training combines online learning, live classroom support and structured in-car coaching. We guide you through DVSA Parts 1, 2 and 3 and provide lesson plans, resources and ongoing support to help you qualify with confidence. DVSA Requirements To apply, you must: Hold a full UK driving licence for 3+ years Have no more than 5 penalty points Have no driving bans in the last 5 years Apply today Submit your details now and our team will contact you to explain the training route, timescales and next steps.

My Four Wheels is a 5-star rated driving school with 500 instructors teaching nationwide - and due to record learner demand, we're now recruiting new Trainee Driving Instructors across the UK. If you're looking for a career change with great earning potential, flexible working, and genuine job satisfaction, this could be the opportunity you've been waiting for. No previous experience is required - we provide full training and ongoing support. Why become a driving instructor with My Four Wheels? Lesson rates typically average around £38 per hour Earn up to £39k per year working 32 hours/week Working 40 hours/weeks will earn an average of £50,000+ Work the hours you want - weekdays, evenings, weekends, part-time or full-time Teach locally (typically within a 30-minute radius, covering 6–8 postcodes) Dual-control car options available via partner providers Start earning sooner – You can apply for a Trainee License after DVSA Part 2 Training fees can be paid back in full after 1 year (ask for details) New Training Academy – Full Training Provided You'll train through our new Training Academy, designed for complete beginners. Training combines online learning, live classroom support and structured in-car coaching. We guide you through DVSA Parts 1, 2 and 3 and provide lesson plans, resources and ongoing support to help you qualify with confidence. DVSA Requirements To apply, you must: Hold a full UK driving licence for 3+ years Have no more than 5 penalty points Have no driving bans in the last 5 years Apply today Submit your details now and our team will contact you to explain the training route, timescales and next steps.

My Four Wheels is a 5-star rated driving school with 500 instructors teaching nationwide - and due to record learner demand, we're now recruiting new Trainee Driving Instructors across the UK. If you're looking for a career change with great earning potential, flexible working, and genuine job satisfaction, this could be the opportunity you've been waiting for. No previous experience is required - we provide full training and ongoing support. Why become a driving instructor with My Four Wheels? Lesson rates typically average around £38 per hour Earn up to £39k per year working 32 hours/week Working 40 hours/weeks will earn an average of £50,000+ Work the hours you want - weekdays, evenings, weekends, part-time or full-time Teach locally (typically within a 30-minute radius, covering 6–8 postcodes) Dual-control car options available via partner providers Start earning sooner – You can apply for a Trainee License after DVSA Part 2 Training fees can be paid back in full after 1 year (ask for details) New Training Academy – Full Training Provided You'll train through our new Training Academy, designed for complete beginners. Training combines online learning, live classroom support and structured in-car coaching. We guide you through DVSA Parts 1, 2 and 3 and provide lesson plans, resources and ongoing support to help you qualify with confidence. DVSA Requirements To apply, you must: Hold a full UK driving licence for 3+ years Have no more than 5 penalty points Have no driving bans in the last 5 years Apply today Submit your details now and our team will contact you to explain the training route, timescales and next steps.

My Four Wheels is a 5-star rated driving school with 500 instructors teaching nationwide - and due to record learner demand, we're now recruiting new Trainee Driving Instructors across the UK. If you're looking for a career change with great earning potential, flexible working, and genuine job satisfaction, this could be the opportunity you've been waiting for. No previous experience is required - we provide full training and ongoing support. Why become a driving instructor with My Four Wheels? Lesson rates typically average around £38 per hour Earn up to £39k per year working 32 hours/week Working 40 hours/weeks will earn an average of £50,000+ Work the hours you want - weekdays, evenings, weekends, part-time or full-time Teach locally (typically within a 30-minute radius, covering 6–8 postcodes) Dual-control car options available via partner providers Start earning sooner – You can apply for a Trainee License after DVSA Part 2 Training fees can be paid back in full after 1 year (ask for details) New Training Academy – Full Training Provided You'll train through our new Training Academy, designed for complete beginners. Training combines online learning, live classroom support and structured in-car coaching. We guide you through DVSA Parts 1, 2 and 3 and provide lesson plans, resources and ongoing support to help you qualify with confidence. DVSA Requirements To apply, you must: Hold a full UK driving licence for 3+ years Have no more than 5 penalty points Have no driving bans in the last 5 years Apply today Submit your details now and our team will contact you to explain the training route, timescales and next steps.

My Four Wheels is a 5-star rated driving school with 500 instructors teaching nationwide - and due to record learner demand, we're now recruiting new Trainee Driving Instructors across the UK. If you're looking for a career change with great earning potential, flexible working, and genuine job satisfaction, this could be the opportunity you've been waiting for. No previous experience is required - we provide full training and ongoing support. Why become a driving instructor with My Four Wheels? Lesson rates typically average around £38 per hour Earn up to £39k per year working 32 hours/week Working 40 hours/weeks will earn an average of £50,000+ Work the hours you want - weekdays, evenings, weekends, part-time or full-time Teach locally (typically within a 30-minute radius, covering 6–8 postcodes) Dual-control car options available via partner providers Start earning sooner – You can apply for a Trainee License after DVSA Part 2 Training fees can be paid back in full after 1 year (ask for details) New Training Academy – Full Training Provided You'll train through our new Training Academy, designed for complete beginners. Training combines online learning, live classroom support and structured in-car coaching. We guide you through DVSA Parts 1, 2 and 3 and provide lesson plans, resources and ongoing support to help you qualify with confidence. DVSA Requirements To apply, you must: Hold a full UK driving licence for 3+ years Have no more than 5 penalty points Have no driving bans in the last 5 years Apply today Submit your details now and our team will contact you to explain the training route, timescales and next steps.

My Four Wheels is a 5-star rated driving school with 500 instructors teaching nationwide - and due to record learner demand, we're now recruiting new Trainee Driving Instructors across the UK. If you're looking for a career change with great earning potential, flexible working, and genuine job satisfaction, this could be the opportunity you've been waiting for. No previous experience is required - we provide full training and ongoing support. Why become a driving instructor with My Four Wheels? Lesson rates typically average around £38 per hour Earn up to £39k per year working 32 hours/week Working 40 hours/weeks will earn an average of £50,000+ Work the hours you want - weekdays, evenings, weekends, part-time or full-time Teach locally (typically within a 30-minute radius, covering 6–8 postcodes) Dual-control car options available via partner providers Start earning sooner – You can apply for a Trainee License after DVSA Part 2 Training fees can be paid back in full after 1 year (ask for details) New Training Academy – Full Training Provided You'll train through our new Training Academy, designed for complete beginners. Training combines online learning, live classroom support and structured in-car coaching. We guide you through DVSA Parts 1, 2 and 3 and provide lesson plans, resources and ongoing support to help you qualify with confidence. DVSA Requirements To apply, you must: Hold a full UK driving licence for 3+ years Have no more than 5 penalty points Have no driving bans in the last 5 years Apply today Submit your details now and our team will contact you to explain the training route, timescales and next steps.

We are recruiting for an experienced Parts Advisor to join our client in Watford. In this role, you will be an essential link between the workshop, service team and customers, ensuring a smooth and efficient parts su.

New Training Academy – Full Support Built In Our new Training Academy provides a structured route through DVSA Parts 1, 2 and 3, combining: Flexible online learning for theory and preparation In-car coaching to build driving and teaching ability Lesson plans, resources and ongoing suppor

Role: Paint Sprayer Location: Stevenage Hertfordshire.Salary: 15ph An excellent opportunity has now arisen for a Paint Sprayer to join our industrial client based in Stevenage Duties of a Paint Sprayer Operating coating spray equipment to apply coatings to products.Prepare parts for coating, includi

PARKER HANNIFIN CORP in Stevenage is seeking a Composite Manufacturing Engineer to develop processing techniques for advanced aerospace composite parts.

The CAD Designer will be responsible for turning ideas into reality: working from a 3D scan, creating bespoke parts that will eventually become tangible goods.

Component Engineer / Components Cataloguer.World Class Defence Organisation is currently looking to recruit a Component Engineer / Components Cataloguer subcontractor on an initial 6 month contract.This position requires experience of components and parts, MS tools, eye for detail, and the ability t

BCT Resourcing is seeking an experienced Parts Advisor for their Letchworth Garden City dealership. The role involves managing parts orders, providing customer service, and supporting workshop technicians. The ideal candidate will have automotive sector experience, strong organizational and IT skill

Systems Performance Modelling Engineer. Produce parts of a complex Seeker model, including modelling the target scenario, seeker hardware and processor algorithms. Systems Performance Modelling Engineer (BBBH18266) Stevenage, England.

Working in our parts department as a Parts Advisor you will be a key part of the Retail Centre. Provide guidance to customers on the availability of parts, ensuring timely and accurate information. Engage in tele sales activities, proactively reaching out to trade customers to promote parts, offers,

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. Join our Transparencies team as a Principal Design Engineer and help drive innovative design solutions. We are looking for a Principal Design Engineer to join our Transparencies team to support a portfolio of new and existing programmes including Fast jet canopies, Helicopter Windscreens and Flight Deck Windows. The Principal Design Engineer is a technical authority within the Transparency Systems team, responsible for leading complex product development, driving technical strategy, and ensuring engineering excellence across multiple programmes. It spans the full lifecycle: advanced concept development, requirements definition, geometric design, materials and process selection, supporting tooling design, manufacturing development, qualification, and in service support. The Principal Design Engineer also plays a major role in shaping technology roadmaps, mentoring engineering teams, and representing the business in high-level customer, regulatory, and airworthiness discussions. This role requires flexibility for occasional travel, both within the UK and internationally. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. Job Responsibilities Act as the technical authority for transparency design across multiple programmes, ensuring design integrity, safety, and compliance with customer, regulatory, and airworthiness requirements. Lead the definition of design standards and engineering best practices for transparency systems and approve design solutions, specifications, concessions, rework schemes, and compliance documentation. Provide expert guidance on requirements management, materials selection, structural performance, optical performance, manufacturing processes and qualification methods. Represent Design function in MRBs and serve as the primary escalation point for all MRB-related queries, exercising technical authority to determine and approve the disposition of non conforming parts. Define and validate test methods and/or alternate means of compliance (analysis/similarity) as required to demonstrate design solution complies with requirements. Act as a senior technical interface with customers, suppliers, regulatory bodies, and internal stakeholders. Communicate complex technical information clearly to both technical and non technical audiences. Lead major technical reviews, gate reviews, and customer design reviews, ensuring high quality technical data and presentations. Identify, assess, and manage technical risks across programmes, proposing mitigation strategies and influencing programme direction. Support capability development within the Transparency Systems team including training, knowledge capture, and succession planning. You will contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Degree in Aerospace, Mechanical or similar Experience in Aerospace design / or Aerospace product development. Deep understanding of the full product lifecycle, design practices, manufacturing processes, and airworthiness requirements. Proven ability to lead complex engineering work packages and solve complex technical problems using evidence based, methodical approaches. Familiarity with digital engineering and model based design preferably using CATIA V5. Excellent communication skills, able to create clear, concise, and accurate technical content and present to senior stakeholders. Desirable: Expert user of CATIA V5 for complex modelling and drawing creation Chartered Engineer status (CEng) Experience working with defence customers and regulatory authorities. Experience in transparencies, composites, or specialist structures/ systems. This is a hands on role, and the work will entail a high level of collaboration with Manufacturing Engineering and Operations as part of an integrated programme team to ensure both technical and programme objectives are met. You'll have strong leadership qualities with experience mentoring and developing engineering teams. You should be adaptable in your approach to work, and be willing to understudy other team members in their areas of responsibility to ensure overall department objectives are met. As Principal Design Engineer, you will be naturally detail oriented and appreciate the need for procedural compliance to meet both regulatory requirements and maintain product safety. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal stakeholders. You should seek to increase/deepen own technical knowledge through study, training, collaborative working and continual professional development. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

CNC Turner Hitchin Salary Up to £45k DOE Our Client based in the Hitchin area are looking to recruit a CNC Turner Setter Operator The ideal candidate will possess: Experienced Setting and Operating CNC sliding Head machines - (Fanuc preferable) CNC Turner / CNC Turning experience on Lathes The ability to read and create programs for production An ability of working to a high standard A passion to work in a busy and fast paced environment Attention to detail and always looking to improve the process Excellent general measuring skills A good understanding of engineering drawings Enthusiastic and Fast Learning You will be working with the world's largest Plastics machining business based at our Clients Hitchin plant, They encourage a progressive and supportive environment and are keen to find a person who is a free thinker but also able to apply themselves to team activity. Our Client offers a busy and clean working environment using the very latest machine tools and measuring instruments. They are a business that embraces continuous improvement and encourage initiative and creativity within all their team. Your duties will include setting CNC sliding head machines for production, CNC Lathes making in-process adjustments, maintaining quality control of the parts you are producing, and liaising with the machine Cell Support and QC teams. Salary is depending upon experience, which includes a shift premium of 20%. Benefits include 24 days paid holiday plus bank holidays, a profit sharing scheme, sick pay scheme and the possibility of advancement. Our Client offers support for training Moving to rotating shift. Working Hours - rotating shift Week 1 - Monday to Friday 6.00am to 2.00pm Week 2 - Monday to Thursday 1.30pm to 10.00pm Friday 1.30pm to 6.40pm CNC / CNC Turner / CNC Turning / LATHES / Sliding Head / Sliding Head Machines / CNC Machinist