Production company jobs in SunderlandCrear alertas

MTrec are currently recruiting for a renowned and respected manufacturing company based in the Houghton area.MTrec are currently looking for proactive individuals who are looking for a long term position in production and assembly.The Job You'll Do: * Assemble electronic circuit boards and pe

MTrec are currently recruiting for a renowned and respected manufacturing company based in the Houghton area.MTrec are currently looking for proactive individuals who are looking for a long term position in production and assembly.The Job You'll Do: * Set up and operate SMT production lines,

MTrec are currently recruiting for a renowned and respected manufacturing company based in the Houghton area. If you would like to know a bit more about this opportunity, or are considering applying, then please read the following job information. MTrec are currently looking for proactive individuals who are looking for a long term position in production and assembly. xwzovoh The Job You'll Do: • Set up and operate SMT production lines, including stencil printers, pick-and-place machines, and reflow ovens., • Load components and feeders according ...

MTrec are currently recruiting for a renowned and respected manufacturing company based in the Houghton area. If you would like to know a bit more about this opportunity, or are considering applying, then please read the following job information. MTrec are currently looking for proactive individuals who are looking for a long term position in production and assembly. xwzovoh The Job You'll Do: • Set up and operate SMT production lines, including stencil printers, pick-and-place machines, and reflow ovens., • Load components and feeders according ...

MTrec are currently recruiting for a renowned and respected manufacturing company based in the Houghton area.MTrec are currently looking for proactive individuals who are looking for a long term position in production and assembly.Assemble electronic circuit boards and perform soldering tasks in lin

MTrec are currently recruiting for a renowned and respected manufacturing company based in the Houghton area.MTrec are currently looking for proactive individuals who are looking for a long term position in production and assembly.Assemble electronic circuit boards and perform soldering tasks in lin

The Production Shift Supervisor will be responsible for overseeing a close-knit team of manufacturing personnel through out the shift, ensuring full compliance with the company and external standards, all the while ensuring and efficient production run.

MTrec are currently recruiting for a renowned and respected manufacturing company based in the Houghton area.MTrec are currently looking for proactive individuals who are looking for a long term position in production and assembly.Set up and operate SMT production lines, including stencil printers,

The company have been going strong for almost 30 years and are now looking for a Production Supervisor to assist with their future growth plans. This would suit someone who has engineering experience within a food production / manufacturing industry looking for progression.

Our client are seeking an electrically biased Production Improvement Engineer, or an experienced Electrical Maintenance Engineer who is keen to further develop their skills in continuous/process improvement. Based within the company clean rooms you will take a hands on approach to implementing quali

The Production Shift Supervisor will be responsible for overseeing a close-knit team of manufacturing personnel through out the shift, ensuring full compliance with the company and external standards, all the while ensuring and efficient production run. Ensure all production schedules are completed

The Company Our client is a market leader in the North East manufacturing sector. They have been very stable through recent times and are now starting to grow this is the reason they now require a Quality Engineer. The Role The Customer Quality Engineer is to liaise with the customer on quality and technical issues, for assigned key customers. Managing all quality aspects targeting agreed objectives, supporting customer quality satisfaction. Providing service/support on all quality related aspects to the Customer and other interested parties. Quality interface to customer, overseeing a high volume of engineering changes. Key point of contact for customer returns, complaints and non-conformances and driver of internal processes to closure. Leading role for internal and customer quality issues-driving investigation, root cause analysis verifying and validation of corrective actions. Involvement in the NPI process verifying specific customer requirements. Conducting FAIs. Technical support to production on all product quality issues, advising on and carrying out technical component inspection. Support Internal Auditing Scheme to ensure internal procedures are being followed and audits are conducted in and closed out in a timely manner. Ensuring the QMS is adhered to, identifying continuous improvement opportunities where possible. Analysing interested parties KPIs and other available data/metrics to identify improvement areas. Periodic evaluation of customer quality performance: focusing on customer complaints, PPM levels, quality of 8D reports. Presenting quality metrics at regular business review meetings. Respond to supplier quality issues on material. Maintaining compliance to accreditations and approvals. Any other reasonable duties as required. The Person HND Electronics qualification. Strong interpersonal skills, personable, team player and focused. Application of quality management systems. Experience of Internal Auditing ISO9001. Working knowledge of IPC-610. Worked within a volume electronics manufacturing environment. Computer literate: Microsoft programs. High-level of data analytic work. Solving tools: Root Cause Analysis, 8D, 5 Why, Fishbone Diagram, Pareto Analysis Commercial awareness. Highly developed communication skills at all levels. The Benefits You will be working for a well-established growing employer. An excellent salary. A good pension scheme. A company experiencing continued growth, expansion and investment. The company are fully compliant with the latest health and safety requirements for current safe working practices. TPBN1_UKTJ

Quantity Surveyor - Sunderland, SR5 3XB Make a Home at Taylor Wimpey At Taylor Wimpey, we don’t just build houses; we build futures. Not just for the people who live in our homes, but for our own people too. When we bring our collective skills together, we make amazing things happen - for ourselves, for each other and for our customers. There are incredible opportunities on your doorstep, and we want you to discover them all. With 22 regional offices across the UK and operations in Spain, we bring our vision to life locally. Here, you’ll be given the tools to develop your skills and the freedom to explore new avenues. Share your ideas, experience a no-blame culture, and shape your work around your life. Every single one of us plays a vital role in bringing to life incredible places and spaces, where anyone can thrive. We believe in making a positive difference to our planet, as well as to people. Home to work that matters, and you can be a part of it. Job Summary Our regional commercial teams are integral to the successful delivery of every Taylor Wimpey project. This role is an opportunity to become part of a dynamic team assisting with procurement, commercial and contractual aspects of the BU. The role entails interfacing with all staff involved in the project including, but not limited to, BUMT, site teams, subcontractors, external suppliers and JV / Development partners. Primary Responsibilities Scheduling and quantifying materials and labour Ensure that commercial procedures comply with both the TW Commercial Manual and the TW Operating Framework. Work alongside other departments to ensure project viability and improve cost effectiveness. Ensure all specifications and programmes are complied with and that quality is not compromised. Process applications and payments and resolve any issues in conjunction with the Finance Department. Commercial Management Assist in WIP and cash flow forecasting. Monitor, reconcile and recharge any costs, which relate to shared cost items with either other businesses within the Group or external Companies. Calculate all the prime costs on developments within your remit, reporting any movements in the costs since the preparation of the funding exercise. Assist in the preparation of Project Budgets for authorisation by the Business Unit Management Team at the appropriate time. Maintain the development budget both in Coins and BoQ. Manage RSL valuations and attend meetings on site. Monitor and report costs Monitor and explain all cost movements within the project valuation. Responsibility for processing Contractor, subcontractor and consultant orders and payments, variation orders and day works. Review any variations on 3rd Party projects and liaise with Technical Project Manager for approvals. Undertake site valuations of production at budgeted cost on a monthly basis. Carry out full CVR process and prepare and present information for monthly finance meetings. Create Cost to Completes and ensure Current budget is up to date. Forecast final accounts and prepare and present cost to complete reports. General Be aware of all codes of practice that impact on estimating e.g. Building Regulations, NHBC requirements, HSE etc. Monitor, reconcile and recharge any costs which relate to shared cost items with either other businesses within the group or external Companies. Attend Pre-Start, Pre-Tender, specification and any other relevant meetings as required. Input and maintain any computer-based databases or systems including Coins and Excel. Attend site on a regular basis to complete Commercial functions. Any other duties as required by the Senior Commercial Manager. Experience, Qualifications, Technical Requirements Good knowledge of Building Regulations, NHBC and Health and Safety requirements. Industry related business qualification. Manage internal and external clients. IT literate (COINS system preferred). What we offer at Taylor Wimpey At Taylor Wimpey, we are committed to enabling you to make a home with us. Our work is not just about building homes; it's about doing work that matters, making a positive impact on the lives of our customers and the communities we serve. We enjoy many benefits as standard, including excellent retail discounts, company funded life insurance and private healthcare, and access to a quality pension scheme with company contributions. We also offer our discounted house purchase scheme, car leasing scheme and share plans, as well as the opportunity to tailor your benefit package to suit your needs with options such as buying extra annual leave or adding dependants to your benefit cover. Our total reward offer works perfectly with our culture, we are a welcoming community where everyone can feel at home. We create a home to your future by providing opportunities for growth and development. We offer industry leading professional training and development, which supports you to unlock your potential and fulfil your career and personal goals in a variety of opportunities and environments. We look to develop our people in the skills and areas they are most interested in, leveraging your qualities and appreciating your unique competencies, skills and expertise that, when we come together, make this a great place to work. If you want to do work that matters and build a career that lasts, make a home at Taylor Wimpey. Inclusivity Statement As a proud Disability Confident Employer, Taylor Wimpey is committed to creating a diverse and inclusive workforce. We actively collaborate with individuals who have disabilities and long-term health conditions which have an effect on their ability to do normal daily activities, ensuring that barriers are eliminated when it comes to employment opportunities. In line with our commitment, we guarantee an interview to applicants who declare to us during the application process that they have a disability and meet the minimum requirements for the role. Join us in building a truly diverse and empowered team. Internal Applicants: Please inform your line manager if you wish to apply for this role.

A multinational defense and aerospace company is seeking a Production Controller to manage and schedule production works orders in Washington. This role is crucial in ensuring effective material management and adherence to the production schedule.

An engineering company based in Washington is seeking an experienced Production Supervisor to oversee manufacturing operations.In this role, you will manage a team of 8-12 staff, ensuring production runs smoothly and adhering to health and safety protocols.Ideal candidates have over five years of ex

The Company Take the next step in your career now, scroll down to read the full role description and make your application. Our client are specialists in their market sector; they are looking for a QA Lead to join them on a permanent basis. ?The Role • Ensure that the output from Production meets all company and customer quality requirements and standards. xrnqpay, • Provide support, guidance and training as required to operational teams (e.g., Sensory training, Basic Food Hygiene)., • Plan, prepare and conduct audits on the Q...

A leading manufacturing company in the United Kingdom is looking for a Workshop Supervisor to oversee daily production activities.

A multinational defense and aerospace company is seeking a Production Controller to manage production work orders in Sunderland, ensuring effective material management and adherence to schedules. This role also involves coordinating production needs and collaborating with teams to solve issues.

Join Our Team at Smurfit Westrock! Are you searching for a workplace that values you and your growth? At Smurfit Westrock, we’re committed to sustainability, employee well-being, and personal development. About Us We are a global leader in sustainable paper and packaging. Our focus is on the health and safety of our employees, the well-being of our communities, and delivering exceptional service to our customers. We support our team members to reach their full potential in an inclusive environment that values diversity. The Role The Material Supply Chain Lead is a newly created role responsible for coordinating the inbound, storage, and outbound flow of raw material between the Smurfit Westrock raw material Supplier and the Markham Vale North Distribution Centre (Markham Vale North) and ensuring the timely transport of raw material to Smurfit Westrock Markham Vale (Markham Vale Production) as required. This role will play a critical part in onboarding and embedding a new operating process, taking a hands-on and proactive approach to ensure a constant, eƯicient and undisrupted supply of raw material to production. The Material Supply Chain Lead will act as the central point of coordination across Warehousing, Transport and Supply Chain activities, with a strong focus on safety, accuracy and operational efficiency. Key Responsibilities  Log and report safety incidents, hazards and near misses, while actively challenging unsafe behaviours. Participate in the root cause analysis of safety incidents and hazards, and support the development, implementation, and follow up of corrective and preventative actions.  Manage the eƯicient unloading, storage and loading of raw material, ensuring product is stored and dispatched in full and in line with operational requirements.  Manage a team to conduct quality checks on raw material deliveries received from Raw material Supplier, escalating any issues as required.  Coordinate and oversee the booking of inbound and outbound raw material movements between the Raw material Supplier, Markham Vale North and Markham Vale Production.  Work with the Supply Chain Manager to coordinate the flow of raw material to support production schedules, adjusting priorities as needed to meet operational demands.  Use Warehouse Management Systems (EFI Vision) to manage inventory movements, data entry and tracking.  Maintain inventory accuracy, including stock counts and reconciliation as required – in line with auditing regulations.  Complete all required documentation accurately and on time, including delivery dockets, manifests and system entries.  Communicate clearly with the Raw material Supplier and internal stakeholders, including Markham Vale North teams, Supply Chain, transport providers and Markham Vale Production.  Support the onboarding, stabilisation and continuous improvement of the new process, identifying opportunities to improve eƯiciency, safety and reliability.  Flexibility to undertake additional tasks or responsibilities as reasonably requested by management (Supply Chain and Markham Vale Production). Skills & Experience  Experience logging and reporting safety incidents, hazard, and near misses.  Experience working in warehouses or distribution centres, including loading and unloading goods following safe working practices.  Experience operating forklift trucks (FLTs).  Must hold a Certificate of Competence to RTITB standards for an appropriate type of forklift truck (FLT). On the job internal training and assessment by selected a company representative will be provided.  Strong administrative skills, including data entry, tracking and record keeping.  Strong knowledge of inventory control and Warehouse Management Systems (EFI Vision experience is preferred).  Experience conducting quality checks on goods received from suppliers.  Good IT skills and confidence working with warehouse systems and Microsoft applications.  Strong organisational and problem-solving skills, with the ability to manage multiple priorities.  Good communication, teamwork and interpersonal skills and the ability to provide direction and instructions to others.  Calm and effective under pressure in a fast-paced operational environment, with adherence to strict deadlines. What We Offer • Competitive salary & benefits, including annual leave, pension, and a Cycle to Work scheme, • Ongoing training and development opportunities, • 24/7 confidential support for you and your family, • Flexible working options and family-friendly policies Smurfit Westrock reserve the right to only shortlist candidates who meet both the Essential and Desirable Criteria. We are an equal opportunities employer, and we welcome applications from all suitably qualified persons regardless of their sex; religious or similar philosophical belief; political opinion; race; age; sexual orientation; or, whether they are married or are in a civil partnership; or, whether they are disabled; or whether they have undergone, are undergoing or intend to undergo gender reassignment. We practice equality of opportunity in employment and select the best person for the job.

Maintenance engineering experience. Do you have engineering experience within the food manufacturing industry and are you looking for a role that offers progression and training?. The company has been established for almost 30 years and is now looking for a Production Supervisor to support its futur

A well-established engineering company in East Sussex is looking for a Multi-Skilled Service & Installation Engineer.In this varied role, you will service and install specialist equipment on customer sites while collaborating with project engineering and production teams.The role requires an NVQ or

A leading luxury furniture design company in Washington is seeking a skilled Production Manager to oversee manufacturing operations. You will ensure products meet the highest luxury standards while managing a team and optimizing production schedules.

Production Team Leader Location: Sunderland Salary: Up to £35,000 + 12% shift allowance Hours: Monday – Friday, 6am–2pm or 2pm–10pm What you’ll do: • Lead and support a team of production staff., • Make sure everyone follows safe working practices., • Keep the workplace clean, organised, and efficient., • Help your team grow and succeed., • Solve problems quickly to prevent production delays., • Follow company policies and procedures at all times., • Be the first person your team can turn to for support., • Help with other tasks as needed to keep the department running smoothly. What we’re looking for: • NVQ Level 3 in Management, • Good at organising and prioritising tasks., • Strong communication skills – confident talking to all levels of staff., • Able to think on your feet and help the team meet targets. How to apply: Click “apply” and send us your up-to-date CV

The Company Our client is a specialist Engineering company due to growth they now require a Welding Inspector. The Role Review and issue work instructions, where required in support of the projects and service co-ordinator, to required timetables in a manner which is clear to recipients and meets agreed customer specifications, internal standards and legal requirements. To review and improve standard work instructions, as necessary. Conduct in process quality inspections and checks and to aid production staff and suppliers in completing work to specification. To advise managers/ staff where there are issues. Conduct quality audits/ checks to plan and report on findings. Perform formal recorded goods in process and final inspections where required and to prepare for/ co-ordinate external inspection visits and NDT tests such that these get completed to plan without contract failures. Collate required internal contract quality and warranty claim records and statistics, warning management of issues. To initiate and participate in warranty and quality problem investigations. Provide customer/ external inspector with agreed external documentation needs. Assess warranty claims and internal quality incidents and to co-ordinate the response/ corrective action to internal standards and in a manner which is acceptable to customer. Record quality incidents in the required manner and communicate these as required to the management team with proposals for improvements. Maintain the calibration system to internal standards. Advise Management/ staff where there are health and safety hazards/issues observed and to stop unsafe actions. The Person Will ideally be time served in a welding/fabrication role. CSWIP 3.1 or higher is a minimum requirement. Previous experience in a similar role is essential. Demonstrable experience in quality control, evaluation, and improvement in a production environment. Knowledge of welding processes and standards. Understanding of metallurgy and process technology in the field of welding. PCN Level 2 for MPI or DPI would be appropriate. The Benefits You will be working for a well-established growing employer. An excellent salary. A company experiencing continued growth, expansion, and investment. The company are fully compliant with the latest health and safety requirements for current safe working practices. TPBN1_UKTJ

Production Operatives Wanted - Join a Friendly and Growing Team Our client is currently looking to add Production Operatives to their team to support continued growth and demand. This is a great opportunity to join a well-established manufacturing company with a supportive work environment. This will be working a two shift pattern: • Day Shift: Monday to Friday 06:55am - 15:00pm, • Back Shift: Monday to Thursday 16:00pm - 00:13am and Friday 14:55pm - 22:28pm Key Responsibilities: • Feeding materials into machinery, • Operating press machines to punch holes in materials, • Performing quality checks on finished parts, • Packing parts according to customer specifications, • Completing safety and quality paperwork, • General housekeeping of machines and work areas, • Meeting production targets This role involves regular manual handling, including lifting large items and operating machinery, either independently or in pairs, depending on the product size. What We Are Looking For: • Ideally, you’ll have recent experience working in a fast-paced manufacturing environment, but full training will be provided for the right candidates. Please Note: Due to the high number of applications we receive, we’re unable to provide individual feedback. If you don’t hear from us within 10 days, please assume your application has not been successful on this occasion. However, we’ll keep your details on file for future opportunities

Pay rate = £17.00 per hour Duties/Responsibilities Manufacture and assemble company products in line with customer specifications. Work alongside engineers to ensure all project and Engineered to Order production activities are completed to specification. Accurately read and interpret wiring/schematic diagrams and layout drawings. Conduct point-to-point wiring checks. Identify and resolve any issues during the project assembly and testing phase, following proper escalation and documentation processes. Follow work instructions and predefined rules regarding safety, quality, delivery, and cost standards. Contribute to and implement lean manufacturing processes and continuous improvement activities. Operate area-specific equipment, including safety checks, setting, loading materials, operating, removing, packing, and sorting materials and/or finished products. Properly use and document measurement equipment. About You Time Served Electrical Engineering & Electrical Craft Apprenticeship to City & Guilds Level 3. NVQ Level 3 in Electrical & Electronic Engineering or equivalent Electrical/Wiring qualification. 2 to 3 years of relevant work experience in production. Experience in control panel wiring and Form Four control panels. Experience in a lean manufacturing/production environment. Functional testing of control panels and electrical testing & fault finding of control panel wiring & installations. NICEIC Inspection & Testing certificate and 18th Edition Wiring Regulations would be advantageous. Strong planning and organisational skills, with the ability to meet deadlines. Excellent interpersonal skills, including oral and written communication. Ability to read electrical engineering drawings and operate equipment controlled via computer touch screens

Rewards and Benefits on Offer; Temp to Perm Opportunities available after a 6-month probation period Identified Manufacturing Career Path for progression including Industry lead training and development Leading Pay rates including higher overtime rates A well-regarded company culture Free on-site parking Excellent transportation links Recommend a Friend £50 gift voucher Christmas events and vouchers The Pay Youll Receive; £14.09 per hour two shift £15.34 per hour three shift Overtime 1 - £18.87 per hour Overtime 2 - £22.01 per hour Overtime 3 - £25.15 per hour The Hours Youll Work; This position requires you to work either a rotating two-shift or three-shift pattern; Two Shift 07.00 - 15.18 (Monday to Thursday) / 07.00 - 14.53 (Friday) 15.13 - 23.31 (Monday to Friday) Three Shift 07.00 - 15.00 (Monday to Friday) 15.00 - 23.00 (Monday to Friday) 20.45 - 07.00 (Sunday Night) / 23.00 - 07.00 (Monday night to Thursday) MTrecs New Opportunity; MTrec Recruitment are currently recruiting for a prestigious automotive company in the Washington area. The Job Youll Do; We are looking for candidates with forklift truck experience. The role would see you carrying out general duties including goods in, picking and packing and completing duties for despatch and inventory as designated by your supervisor. Daily meetings with the team leader or supervisor To help prioritise workloads within the department / designated production area To deal with the movement of products within the warehouse, using the appropriate FLT. Line feeding using the FLT Picking and packing duties when required, and taking instructions from supervisors and management Should have working knowledge of all production departments and understand the systems used Maintain the companys health & safety standards at all times To follow all legal and company requirements to the use of forklifts in the Warehouse if applicable About You; Valid Reach FLT licence Previous experience in a fast-paced production / manufacturing environment A positive attitude and are willing to learn more skills on the job Confidence on the job and are happy to take on more responsibility if necessary TPBN1_UKTJ

Path2 solutions are working with one of the Uk’s leading telecoms companies to hire warehouse operatives for its busy hub based in Sunderland. Successful candidates your day-to-day tasks will include quality checking packages, adhering to health and safety, working on the production line picking and packing products and using bubble wrap to protect items. Benefits: Weekly pay (competitive rates) Great Location Bike storage onsite Long term opportunities Company pension scheme Pay Rate: £12.67 - £14.95 per hour Shifts: 7am – 3pm, Monday - Friday

We are seeking an enthusiastic and self-motivated candidate for the position of quality inspectors who will be working for a car manufacturing company. Youll play a crucial role in keeping operations running smoothly. Shifts & Salary: £12.21 per hour Shifts: 07:00am-15.08pm/ 14:20pm-12:38am (early finish on Fridays) Full time/part time available Benefits Weekly pay Long-term work with a chance to go permanent Discounts at top retailers and supermarkets Wellbeing, financial and legal support available Job Role / Duties: Visually and dimensionally check parts, assemblies, and finished cars for flaws, fit, finish and function Ensure vehicles and their components meet strict standards Identify defects Reporting damaged goods to supervisor to resolve issues. Working on a production line. Maintain a clean and safe warehouse space. Work with team members to meet deadlines and targets. What were looking for Physically fit with the stamina to be on your feet for long periods. Good organisational skills Reliable, punctual and a team player Willing to work flexible shifts Keen eye for detail TPBN1_UKTJ

NRL are currently recruiting for Material Handling Operators to join a world-leading, global Battery Manufacturing organisation based in the North East of England to support the development and operation of a world class, innovative, large-scale mass manufacturing plant. This is a unique and rare opportunity to join one of the most exciting, large scale, net zero industrial developments where new and emerging technologies will be adopted in support of the rapidly growing electric vehicle marketplace. Department: Material Handling Location: Sunderland Job Title: Material Handling Operator Working hours: Full Time Contract type: Permanent Reports to: Material Handling Supervisor Job Purpose: You will play a crucial role in the receipt, storage and movement of materials within our manufacturing facility. You will be responsible for handling and transporting materials to support the production process, ensuring timely and accurate material flow to meet production targets. Outline and Responsibilities: * Operate material handling equipment, such as forklifts, V.N.A, Reach, Tow Tractor, Pallet Truck to move materials within the warehouse and production areas. * Receive, inspect and verify incoming materials for accuracy and quality. * Load and unload materials from trucks, ensuring proper handling and placement. * Transport materials to designated areas, ensuring proper inventory control and stock rotation. * Assist with maintaining accurate inventory levels and assist in stocktaking and cycle counts. * Support production teams by ensuring timely delivery of materials to production lines. * Maintain a clean and organised work environment, adhering to safety standards and company policies. * Assist with packaging, labelling and preparing materials for shipping. * Collaborate with the warehouse team to optimise space and material handling efficiency. Experience and Qualifications Required: * Proven experience as a Material Handling Operator, Warehouse Worker or a similar role (experience in automotive industry is advantageous). * Valid forklift certification preferred (or ability to obtain certification). * Understanding of material handling processes and safety procedures. * Ability to work in a fast-paced environment with excellent time management. * Basic computer skills (inventory management systems or SAP knowledge is preferable). Preferred Skills * Forklift, VNA license * Knowledge of Lean Manufacturing or 5S principles * Ability to work independently or as part of a team About AESC: AESC is a global leader in the development and manufacturing of high-performance batteries for electric vehicles and energy storage systems. Over the past 15 years, AESC has produced power batteries for more than a million EVs across 59 countries, achieving a flawless record of 'zero critical incidents'. AESC's team works continuously to improve the company's global leadership in product development, quality and sustainability. In 2022, AESC was again named among 'Global Tier 1 Battery Companies' by Benchmark, a leading UK-based lithium-ion battery supply chain research organisation. Why Join Us? * Competitive Salary * Opportunity for career development * Enhanced pension scheme (matching up to 10% of employee contribution) * 26 days holidays + bank holidays, with an extra day every five years up to 30 days * Discounted gym membership * Cycle to work scheme The NRL Group connect global companies with the right people to bring engineering projects to life. Supporting contracting companies with energy transition plans and working with our clients to create a cleaner, greener future. We welcome applications from every walk of life and are committed to diversity within the industries we support, as a certified Inclusive Recruiter and Armed Forces friendly employer. You can ensure you stay safe when job searching online by visiting the JobsAware website

Rewards and Benefits on Offer; • Temp to Perm Opportunities available after a 6-month probation period, • Identified Manufacturing Career Path for progression including Industry lead training and development, • Leading Pay rates including higher overtime rates, • A well-regarded company culture, • Free on-site parking, • Excellent transportation links, • Recommend a Friend £50 gift voucher, • Christmas events and vouchers The Pay You’ll Receive; • £15.34 per hour, • Overtime 1 - £18.87 per hour, • Overtime 2 - £22.01 per hour, • Overtime 3 - £25.15 per hour The Hours You’ll Work; This position requires you to work a rotating three-shift pattern; Three Shift • 07.00 - 15.00(Monday to Friday), • 15.00 - 23.00(Monday to Friday), • 20.45 - 07.00(Sunday Night) / 23.00 - 07.00(Monday night to Thursday) MTrec’s New Opportunity; MTrec Recruitment are currently recruiting for a prestigious automotive company in the Sunderland area. The Job You’ll Do; We are looking for candidates with production / manufacturing experience. The role would see you carrying out general duties such as including machine operating, quality inspection, hand assembly, completing duties for despatch and inventory as designated by your supervisor. • Daily meetings with the team leader or supervisor, • To help prioritise workloads within the department / designated production area, • Working in a fast-paced automotive environment, • Running machinery assisting with the overall production process, • Use of hand tools to assemble components, • Hand assembly of automotive components, • Quality inspection of a range of components, • Manual Handling with heavy lifting, • Should have working knowledge of all production departments and understand the systems use, • Maintain the company’s health & safety standards at all times, • To follow all legal and company requirements to the use of forklifts in the Warehouse if applicable About You; • Previous experience in a fast-paced production / manufacturing environment, • A positive attitude and are willing to learn more skills on the job, • Confidence on the job and are happy to take on more responsibility if necessary

The Company Our client are specialists in their market sector; due to expansion they are looking to recruit a Maintenance Electrician on a 2-shift system. The Role Will be a permanent position. To work on planned and breakdown maintenance on a range of machinery associated with production. Planned preventative maintenance and breakdown work on production equipment. To diagnose and repair both electrical and mechanical faults. To minimise any down time to production. PLC diagnostics. Working 2 shift pattern just Monday-Thursday. The Person You will ideally be time served. Must be multiskilled. Logical problem solver with excellent fault-finding abilities. Previous manufacturing experience is essential. PLC experience essential. Must be happy working 2 Monday-Thursday one week days one nights. Have knowledge of manufacturing. The Benefits Attractive base salary with plenty of OT opportunity. Working for a forward-thinking growing business. Good company Ts and Cs. TPBN1_UKTJ

The Company Our client are specialists in their market sector; due to expansion they are looking to recruit a Maintenance Electrician on a 2-shift system. The Role • Will be a permanent position., • To work on planned and breakdown maintenance on a range of machinery associated with production., • Planned preventative maintenance and breakdown work on production equipment., • To diagnose and repair both electrical and mechanical faults., • To minimise any down time to production., • PLC diagnostics., • Working 2 shift pattern. The Person • You will ideally be time served., • Must be multiskilled., • Logical problem solver with excellent fault-finding abilities., • Previous manufacturing experience is essential., • PLC experience essential., • Must be happy to work one week of days one week of backs., • Have knowledge of manufacturing. The Benefits • Attractive base salary with plenty of OT opportunity., • Working for a forward-thinking growing business., • Good company T’s and C’s

Description As an experienced Traffic Management Operative, you will be required to work on Traffic Management Schemes for a range of projects, helping them to run smoothly and efficiently to achieve maximum production in a working day, whilst maintaining a high Health and Safety standard. This role requires flexibility due to the nature of the business. You must be able to work both days and nights, including some weekends as required. You must have a can do and responsible attitude to work. Key Responsibilities We are looking for someone to: Oversee all methods of traffic management; Give and take, Priority, Stop/Go boards, Portable traffic signals, Convoy working, Road closures, Lane closures and diversions Ensure all work is carried out according to safe working methods and best practice procedures Carry out risk assessments and method statements on works involving traffic management Ensure that all activities associated with the job are carried out according to laid down procedures where possible. Identify areas that can be improved and report to your line manager Ensure that daily vehicle checks are carried out – to ensure cleanliness and tidiness of vehicle and the safety of the driver and passenger Promote positive company image whilst at work (via wearing of company clothing, attitude, and site cleanliness) Demonstrate initiative by constantly looking to see where improvements can be made Assist the public, directing them through safe site lines when required Ascertain when management intervention is required GTM Golden Rules to be followed Only undertake Traffic Management activities that you have the qualification to undertake (LANTRA) All Traffic Management setups must be compliant with guidance and legislation (Red Book, Chapter 8, ARTSM etc.) Regularly check your site to ensure it remains compliant Report any unsafe acts and conditions, and rectify immediately if safe and competent to do so Drive safely and avoid distractions. Keep within the speed limit and drive with due care and attention to prevent road traffic collisions Park vehicles safely, taking consideration of members of the public and other road users Five-point PPE to be worn on site at all times Experience and Qualifications Lantra 12d accreditation as a minimum TTMBC, 12d (M1-M2) Lantra 12 a/b accreditation, IPV driver, foreman advantageous Provide evidence that you understand the differences between Chapter 8 and the Safety at Street Works and Road Works (red book) and how these apply Full valid UK driving licence Be able to read and understand CAD drawings, in relation to the works required Preferable to have mechanical ability in relation to Traffic Lights Salary and Benefits We offer a competitive salary based on experience along with a full benefits package. Network Plus is proud to be an Equal Opportunity Employer. We celebrate diversity and do not discriminate based on race, religion, colour, nationality, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. We are Armed Forces-friendly. We welcome applications from ex-Armed Forces personnel, reservists, armed forces veterans, cadet instructors and military spouses/partners. We understand that privacy and the security of your personal information is extremely important. By applying for this role, you agree to the terms of our privacy policy which you can find here - (url removed). About Go Traffic Management Go Traffic Management has been serving traffic management solutions to clients since 2008, and are now one of the UK’s largest traffic management providers. Our services are delivered from our 22 regional depots, through our dedicated team of 200 employees and support network of approved suppliers. At Go Traffic Management, we have a reputation for providing clients with extensive, well-planned, and expertly delivered solutions for projects and schemes of all sizes. We pride ourselves in meeting (and often exceeding) clients’ expectations in a professional and cost-effective manner, which is a strategy that has resulted in our long-standing working relationships with clients, partners, and stakeholders. Be: SAFE - Go Traffic Management Our Be: SAFE campaign actively encourages our workforce to work safely and avoid unsafe acts and conditions by following four basic rules

Rewards and Benefits on Offer; Temp to Perm Opportunities available after a 6-month probation period Identified Manufacturing Career Path for progression including Industry lead training and development Leading Pay rates including higher overtime rates A well-regarded company culture Free on-site parking Excellent transportation links Recommend a Friend £50 gift voucher Christmas events and vouchers The Pay Youll Receive; £14.09 per hour two shift £15.34 per hour three shift Overtime 1 - £18.87 per hour Overtime 2 - £22.01 per hour Overtime 3 - £25.15 per hour The Hours Youll Work; This position requires you to work either a rotating two-shift or three-shift pattern; Two Shift 07.00 - 15.18 (Monday to Thursday) / 07.00 - 14.53 (Friday) 15.13 - 23.31 (Monday to Friday) Three Shift 07.00 - 15.00 (Monday to Friday) 15.00 - 23.00 (Monday to Friday) 20.45 - 07.00 (Sunday Night) / 23.00 - 07.00 (Monday night to Thursday) MTrecs New Opportunity; MTrec Recruitment are currently recruiting for a prestigious automotive company in the Washington area. The Job Youll Do; We are looking for candidates with forklift truck experience. The role would see you carrying out general duties including goods in, picking and packing and completing duties for despatch and inventory as designated by your supervisor. Daily meetings with the team leader or supervisor To help prioritise workloads within the department / designated production area To deal with the movement of products within the warehouse, using the appropriate FLT. Line feeding using the FLT Picking and packing duties when required, and taking instructions from supervisors and management Should have working knowledge of all production departments and understand the systems used Maintain the companys health & safety standards at all times To follow all legal and company requirements to the use of forklifts in the Warehouse if applicable About You; Valid counterbalance FLT licence Previous experience in a fast-paced production / manufacturing environment A positive attitude and are willing to learn more skills on the job Confidence on the job and are happy to take on more responsibility if necessary TPBN1_UKTJ

Workshop Operative / Workshop Support Technician We are seeking a highly motivated and organised individual to join our team as a Workshop Support Technician. This role is crucial to the smooth operation of our workshop, primarily focusing on logistics, inventory and supporting the final stages of product manufacturing. The ideal candidate will be punctual, possess a keen eye for detail and be committed to maintaining a high standard of work. Position Details This role offers a real opportunity to evolve and grow within our company. Were looking for someone who is determined and hard-working, and in return we can offer the chance to become a key player in our quickly-growing brand. Contract Type: Full-Time (Permanent following 3 month probation) and working hours are 7.30am4.30pm, with a 1:30pm Friday finish. There will be some circumstances where overtime and travel (mainly to London) is required. This role is based in Washington, NE37. Job Types: Full-time, Permanent Key Duties and Responsibilities The Workshop Support Technician will be responsible for a range of essential activities, closely always following company procedures and policies, and ensuring adherence to ISO9001 management system: • Logistics and Inventory Management, • Goods In/Out: Managing the flow of incoming and outgoing materials and finished products, including accurate documentation and coordination with shipping providers., • A valid Forklift license is desirable but not essential., • Packing: Ensuring all finished products are securely and correctly packed, following established procedures to prevent damage during transit., • Stock Check: Performing regular and ad-hoc inventory counts, reconciling discrepancies, and assisting with overall stock organisation to maintain accurate records., • Cleaning - Keeping the workshop and surrounding areas clean, tidy and free of obstructions., • Production Support, • Finishing and Assembly Support: Providing direct support to the Finishing and Assembly teams, which includes preparing components, moving materials, and assisting with basic assembly or finishing tasks as needed. Required Skills and Attributes To excel in this role, the candidate must demonstrate the following: • Keen eye for detail: The ability to notice and correct small errors in packing, assembly, and stock documentation., • Organised: Excellent organisational skills to manage goods in/out, maintain a tidy and efficient stockroom, and keep accurate records., • Punctual: A strong commitment to punctuality and reliability, ensuring workflow and deadlines are consistently met., • Teamwork: The ability to work effectively as part of a team is crucial. As is the ability to also work independently after training., • Physical ability: The role often requires physical strength to complete tasks such as lifting and moving., • Forklift Licence: Valid and in date licence desirable but not essential., • Safety Knowledge: Strict adherence to safety procedures, regulations and company policies., • Communication: Ability to communicate effectively with team members and supervisors., • Experience working with ISO9001 is beneficial but not mandatory., • Driving Licence: Essential. TPBN1_UKTJ

Baltic Recruitment are delighted to be partnering with a market-leading manufacturing organisation to assist with their search for a Production Improvement Engineer. Our client are seeking an electrically biased Production Improvement Engineer, or an experienced Electrical Maintenance Engineer who is keen to further develop their skills in continuous/process improvement. Overall Purpose: Based within the company clean rooms you will take a hands on approach to implementing quality, throughput and process standardisation improvements to existing production processes. Utilise mechanical, electrical and electronic skills to provide support and training to production and maintenance staff in the setting up and standardisation of equipment and resolution of breakdowns. To work collaboratively with the production team and others as required. Key Duties: To be the first link to production when dealing with process issues which may occur - working with teams and departments to suggest ways to move forward and overcome. Analyse existing processes to identify areas for improvement. Assist designers in the development of new products when requested, including the writing of new assembly sequences. When required assist in the implementation of new products in accordance with the relevant SOP for Product Development. To learn existing technologies/processes and act as technical back-up to all teams when required. Assist in the design and development of relevant machinery, tooling, equipment and processes to ensure we maintain high quality, safe, effective and minimum cost products, new or existing. Support production and maintenance staff on equipment including automation to maintain and increase production efficiency. To maintain comprehensive and accurate records of all work in the formats required. Involvement with new design, installation and movement of existing equipment Liaison with any sub-contractors. Overhaul and repair of machines/equipment/plant machinery. Design and train others in preventative maintenance practices. Plan and prioritise workload to support the manufacturing process, ensuring all processes are robust, safe and properly maintained and documented as appropriate. Continually monitor process performance through uptime/downtime, developing action plans for improvement. Ensure all drawings, documents and relevant information is kept up to date. To ensure personal training is carried out as and when required. To carry out any such other tasks as and when required. To assist in any area of the business when required. Work with Shift Leaders to ensure compliance to Health and Safety standards. To ensure maintenance compliance to relevant quality, Regulatory and H&S standards and general requirements. Monitor, maintain and strive for continuous improvement to the service and for effective good practice within their role. To maintain and improve upon the company's current Kaizen / 5 s activities in all environments and assistance with all future improvement activities. To ensure training of others is robust, safe and documented as appropriate. Deliver work safely and to a standard that ensures the health and safety of others. Key Requirements: Time served and experienced in Electrical and electronic Engineering with mechanical capabilities. Working knowledge of production methods for component and assembly manufacture. Proven solid experience in a manufacturing OR assembly environment. Knowledge of Kaizen or 5s continual improvement and lean manufacturing principals. Experience of Electrical and Mechanical Installations. Experience of automation/pick & place installation, fault finding and repair. The Package: Competitive salary on offer, depending on experience. Day shift role: Monday to Thursday 7:45 and 16:40 & Friday 07:45 to 12:45. Flexible Working is offered for this position. Employee is able to build a Flexible allowance 2 days credit/1 day deficit. Pension contribution 5%. Pension Salary Sacrifice Scheme. Death In service Benefit 2 x Annual salary. Perkbox. Health Shield, Cash Health Scheme. TPBN1_UKTJ

Maintenance Technician (Electrical Bias) Sunderland Shift-based role The Role We are currently looking for an experienced Maintenance Technician (Electrical Bias) to join our Sunderland site. The purpose of this role is to ensure that process, plant, and building maintenance is carried out to the highest standard, supporting our goal of zero business interruption . Reporting to the Plant Engineer (PU Manager) , you will play a key role in maintaining high standards of safety, quality, delivery, and uptime across the facility. Key Responsibilities Health, Safety & Environment Ensure compliance with all Health, Safety, Environmental, and statutory requirements. Maintain plant and processes in safe working order at all times. Identify, report, and rectify risks and hazards promptly. Carry out risk assessments and ensure excellent housekeeping standards. Ensure correct waste disposal and COSHH compliance. Carry out electrical work within authorised limits and current regulations. Quality Ensure robust processes and optimised set-ups to reduce scrap and non-conforming product. Actively participate in practical problem-solving for plant and process issues. Delivery Achieve and maintain plant and process uptime targets. Communicate planned maintenance with the PU Manager and Process Leaders. Support stock accuracy activities, including stock takes. People Build strong working relationships with production and process teams. Promote and coach TPM, clean-and-check activities across the business. Manage contractors, including inductions, permits, risk assessments, and safe systems of work. Process Carry out planned and preventative maintenance to schedule. Maintain and effectively use maintenance systems (e.g. Miquest). Monitor uptime, downtime, and capacity to drive continuous improvement. Research best-in-class practices and innovations to improve performance and reduce environmental impact. Support ad hoc production or project activities as required. Cost Lead improvement initiatives to eliminate waste. Monitor subcontracted work for quality and value. Control spare parts and consumable usage efficiently. Ensure all expenditure follows company policies and procedures. Minimum Requirements Qualification: HNC / HND in Electrical or Mechanical Engineering (Electrical bias preferred). Experience: Relevant maintenance experience, ideally within an automotive supply or manufacturing environment. Time-served apprenticeship. Compensation & Benefits Base Salary: £38,984 per annum Shift Allowance (12%): £4,678 per annum Attendance Allowance: £300 per annum Christmas Voucher: £60 Pension: Like-for-like scheme, up to 7% employer contribution Private Medical: Bupa healthcare cover Shift Pattern Morning Shift Monday–Thursday: 07:00 – 15:18 Friday: 07:00 – 14:53 Late Shift Monday–Thursday: 16:20 – 00:38 Friday: 14:55 – 22:48 INDNC TPBN1_UKTJ

White Label are very excited to be working with our longstanding client who are now keen to expand their team with a Lead Designer You’ll be part of a rapidly growing business with a full order book, an excellent culture, a proud history and ambitious plans. The company specialises in bulk material handling and plant processing markets, offering services across sectors such as mining, tunnelling, quarrying, oil & gas, and more. We are recruiting for a Lead Designer to be an integral part of the team: This role can will be based in either Sunderland OR Chorley depending on the distance of the individual (TBD) The primary purpose of the Lead Design Engineer role is to take ownership of all design outputs and deliverables on allocated project(s). This includes coordinating the scheme 3D model, managing equipment interfaces, and producing technical documentation such as drawings, 3D models, and manufacture packs. The Lead Design Engineer is also responsible for ensuring quality and consistency of outputs by supervising, advising, and checking the work of Design Engineers on allocated project(s). Benefits • Competitive salary £50k - £60k DOE, • 25 days holiday plus bank holidays – ops to buy more holidays, • Contribution towards eye test and glasses, • Online company discount benefits site including cinema tickets and gym membership discount, • Long Service Awards, • Employee recognition scheme, • Employee Assistance Programme, • Flexible Benefits Package, • 37 hours per week with a 1pm finish on a Friday, • Hybrid working opportunities Your Key Responsibilities • Lead the design and development of equipment, systems, and schemes to the specified brief., • Lead the production of 3D models and technical drawings, ensuring compliance with company CAD standards and design procedures., • Lead the production of technical documentation in accordance with company standards., • Manage drawings, models, bill of materials, and technical documents using company systems., • Ensure design outputs (designs, drawings, documentation, etc.) on allocated project(s) meet project specifications, relevant standards, and regulatory requirements., • Identify variations to contractual scope and escalate to the Project Engineer., • Lead and facilitate design review meetings, ensuring design team actions are captured, assigned, and completed effectively., • Carry out analysis of designs with a view to improving safety, DfMA, and functionality., • Promote value engineering, standardisation, risk reduction, and a right-first-time approach., • Undertake site visits and surveys to support successful delivery of projects., • Provide technical leadership, support, and mentoring to Design Engineers and project team members., • Support the rectification of any NCR raised against the department., • Participate & contribute to any lessons learned and continuous improvement meetings., • Lead the development of processes to improve efficiency and project delivery., • Ensure all work is delivered in alignment with the business’ ISO 9001 processes and templates as controlled within the Quality Management System (COS)., • Ensure personal objectives are completed in a timely manner and drive overall departmental/ business objectives year-on-year. Skills, Knowledge and Expertise HNC in relevant design or engineering discipline, or equivalent Previous experience as a Design Engineer, with experience in material handling. Excellent knowledge of bulk material handling, conveyor systems, and associated equipment. Good 3D CAD software knowledge (Autodesk Inventor or Revit preferred). Excellent knowledge of technical drawing and drafting standards (BS 8888). Excellent understanding of the design process, and its associated documentation. Good knowledge of manufacturing processes associated with heavy fabrication. Excellent knowledge of design standards and regulations. Excellent understanding of mechanical and structural design principles. Good understanding of Design for Manufacture and Assembly (DfMA). Good understanding of checking designs, drawings, models, and technical documentation. Proficient at using Microsoft Office applications. Ability to clearly communicate design ideas, both internally and externally. Good knowledge of workload and project planning. Ability to mentor and guide junior colleagues. A high attention to detail and committed to quality performance / output. If this sounds like something you’d be interested in, please get in touch

Job Title: Production Shift Supervisor Location: Seaham, County Durham Salary: £33,297 Shifts: Double days (Earlies and Backs) Benefits: • Employer-contributed pension, • Life insurance, • Discounted holiday schemes, • Employee benefits platform, • 24/7 GP access and Employee Assistance Programme, • Full training & development opportunities The Company This is a fantastic opportunity to join a well-established and award-winning food manufacturing business with a strong reputation across both UK and international markets. Known for its consistent product quality and commitment to service, the company continues to invest in both operations and people. The working environment is respectful, inclusive, and driven by continuous improvement — an ideal setting for individuals looking to progress in a stable and growing organisation. Job Description The business is currently seeking a Production Shift Supervisor to take responsibility for overseeing all manufacturing activity during night shifts. The successful candidate will be expected to manage shift resources, ensure KPIs are met, and maintain compliance with safety and hygiene standards. The Production Shift Supervisor will coordinate the output of production lines, handle operational troubleshooting, and work cross-functionally with planning, warehouse, engineering, and quality teams. This position blends hands-on shop floor leadership with key management responsibilities, making it ideal for someone who enjoys balancing process efficiency with team oversight. Skills & Experience To be considered for the Production Shift Supervisor role, candidates should demonstrate: • Experience in a supervisory role within manufacturing, ideally food or FMCG, • Strong understanding of production KPIs, health & safety, compliance, and continuous improvement, • The ability to lead and motivate teams, manage performance, and maintain morale, • Effective communication skills for shift handovers and cross-department collaboration, • A calm, solutions-focused approach under pressure, • Good IT literacy and ability to analyse reports and performance metrics, • Willingness to undertake training in food safety and people management (if not already held) Why Should You Apply? • Step into a key leadership role as a Production Shift Supervisor in a growing, high-performing business, • Gain exposure to a fast-paced environment with modern equipment and systems, • Work in a business that values inclusive leadership and operational excellence, • Receive structured training and support in both technical and people management, • Benefit from a competitive package and long-term career potential

Project Draughtsperson / CAD Technician An exciting opportunity for an experienced Project Draughtsperson / CAD Technician to join our team at NE&C Windows and Doors Limited, supporting aluminium window and door projects from design through to production within a growing and well-established business. If you’ve also worked in the following roles, we’d also like to hear from you: Draughtman /Draughtswoman, CAD Designer, Aluminium Designer, Façade Draughtsperson, Design Technician SALARY: £36,000 to £40,000 per annum + Benefits (includes Free On-Site Parking) LOCATION: Washington, Tyne and Wear, North East England – Fully Office Based JOB TYPE: Full-Time, Permanent JOB OVERVIEW Due to continued growth, NE&C Windows and Doors Limited is looking to recruit a skilled Project Draughtsperson / CAD Technician to support an expanding portfolio of aluminium window and door projects. As a Project Draughtsperson / CAD Technician you will be responsible for producing accurate architectural and production drawings using AutoCAD and Logikal, working closely with clients, architects, and internal teams to meet agreed timescales. The Project Draughtsperson / CAD Technician will play a key role in ensuring cutting lists, production documentation, and installer packs are accurate and aligned with company KPIs, while also supporting surveys and attending project meetings when required. This is an excellent opportunity to join a growing business offering stability, long-term development, and involvement in technically interesting projects. ABOUT US NE&C Windows and Doors Limited is a specialist manufacturer and supplier of high-quality aluminium window and door systems. With a strong reputation for technical expertise, precision, and customer service, the business continues to grow across commercial and residential sectors. NE&C takes pride in delivering reliable, well-engineered solutions and fostering a collaborative, supportive working environment. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the Project Draughtsperson / CAD Technician include: • Producing CAD Drawings: Creating detailed architectural and production drawings using AutoCAD and Logikal, • Client & Architect Liaison: Coordinating with project clients and architects to agree and secure drawing approvals, • Production Documentation: Preparing accurate cutting lists and production information in line with company KPIs, • Project Meetings: Attending meetings and representing NE&C Windows and Doors Limited professionally, • Site Surveys: Carrying out site surveys as required to support project accuracy, • O&M Manuals: Ensuring operation and maintenance manuals are completed for each project, • Installer Packs: Producing clear and comprehensive installer packs for site teams CANDIDATE REQUIREMENTS • Previous experience producing CAD drawings within the aluminium window and door sector, • Proven experience using AutoCAD for technical and production drawings, • Experience using Logikal or similar industry-specific software, • Strong organisational skills with excellent attention to detail, • Ability to prioritise tasks effectively in a fast-paced environment, • Confident communication skills when liaising with clients, architects, and internal teams, • A professional and proactive approach to work NO AGENCIES PLEASE HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. JOB REF: AWDO-P14266 This job is being advertised by AWD online on behalf of NE&C Windows and Doors Limited

The Rewards and Benefits on Offer: A full-time, permanent position with long-term career opportunities. Comprehensive training and continuous professional development. Work within a supportive and experienced maintenance team. Free on-site parking. Company pension scheme. Three-shift pattern following initial training/orientation period. New Job Opportunity: We are delighted to be recruiting for an experienced Maintenance Technician to join a well-established and expanding manufacturing site. This is an excellent opportunity for a multi-skilled engineerpreferably with a background in food manufacturingwho enjoys problem-solving, teamwork, and working with a wide range of mechanical and electrical systems. Youll play a key role in maintaining and improving production machinery, ensuring equipment runs efficiently, safely, and to the highest quality standards. The Job Youll Do: Carry out planned and unplanned maintenance on site equipment, including mixers, blenders, form-fill packaging machines, sachet machines, and metal detectors. Maintain electrical and mechanical systems, as well as site facilities and infrastructure. Perform basic boiler care (steam and thermal fluid) and chiller maintenance. Correctly handle and use approved chemicals and food-contact equipment. Manage documentation including certification records, machine data sheets, and inventory logs Order spare parts, approved chemicals, and maintenance tools when required. Ensure precise shift handovers and clear communication across teams. Supervise contractors and issue permits to work. Support and oversee installation of new machinery and equipment. Conduct root cause analysis to prevent recurring breakdowns. Undertake special projects and continuous improvement initiatives. Assist operators with machine operation and troubleshooting. Lead and support technicians and trainee engineers as needed. Drive site improvements in hygiene, quality, and performance. Participate in internal and external audits. Occasionally attend off-site training related to new or upgraded equipment. About You: Recognised engineering qualification (NVQ Level 3, BTEC, or time-served apprenticeship). Electrical qualification with 18th Edition IET Wiring Regulations certification. Strong PC skills, including Microsoft Office (Word, Excel, Teams, etc.). Proven experience in maintenance within a manufacturing environment (food sector preferred). Excellent problem-solving and diagnostic abilities. A proactive and safety-conscious approach to all tasks. Strong teamwork and communication skills. Welding skills preferred but not essential. Food hygiene experience training provided if required TPBN1_UKTJ

Rewards and Benefits on Offer; • Temp to Perm Opportunities available after a 6-month probation period, • Identified Manufacturing Career Path for progression including Industry lead training and development, • Leading Pay rates including higher overtime rates, • A well-regarded company culture, • Free on-site parking, • Excellent transportation links, • Recommend a Friend £50 gift voucher, • Christmas events and vouchers The Pay You’ll Receive; • £15.34 per hour, • Overtime 1 - £18.87 per hour, • Overtime 2 - £22.01 per hour, • Overtime 3 - £25.15 per hour The Hours You’ll Work; This position requires you to work a rotating three-shift pattern; Three Shift • 07.00 - 15.00 (Monday to Friday), • 15.00 - 23.00 (Monday to Friday), • 20.45 - 07.00 (Sunday Night) / 23.00 - 07.00 (Monday night to Thursday) MTrec’s New Opportunity; MTrec Recruitment are currently recruiting for a prestigious automotive company in the Washington area. The Job You’ll Do; We are looking for candidates with production / manufacturing experience. The role would see you carrying out general duties such as including machine operating, quality inspection, hand assembly, completing duties for despatch and inventory as designated by your supervisor. • Daily meetings with the team leader or supervisor, • To help prioritise workloads within the department / designated production area, • Working in a fast-paced automotive environment, • Running machinery assisting with the overall production process, • Use of hand tools to assemble components, • Hand assembly of automotive components, • Quality inspection of a range of components, • Manual Handling with heavy lifting, • Should have working knowledge of all production departments and understand the systems used, • Maintain the company’s health & safety standards at all times, • To follow all legal and company requirements to the use of forklifts in the Warehouse if applicable About You; • Previous experience in a fast-paced production / manufacturing environment, • A positive attitude and are willing to learn more skills on the job, • Confidence on the job and are happy to take on more responsibility if necessary

Rewards and Benefits on Offer; • Temp to Perm Opportunities available after a 6-month probation period, • Identified Manufacturing Career Path for progression including Industry lead training and development, • Leading Pay rates including higher overtime rates, • A well-regarded company culture, • Free on-site parking, • Excellent transportation links, • Recommend a Friend £50 gift voucher, • Christmas events and vouchers The Pay You’ll Receive; • £14.09 per hour, • Overtime 1 - £18.87 per hour, • Overtime 2 - £22.01 per hour, • Overtime 3 - £25.15 per hour The Yours You’ll Work; This position requires you to work a rotating two-shift pattern; Line 1 • 07.00 - 15.18 (Monday to Thursday) / 07.00 - 14.53 (Friday), • 16.35 - 00.53 (Monday to Thursday) / 15.10 - 23.03 (Friday) Line 2 • 06.45 - 15.03 (Monday to Thursday) / 06.45 - 14.38 (Friday), • 16.20 - 00.38 (Monday to Thursday) / 14.55 - 22.48 (Friday) MTrec’s New Opportunity; MTrec Recruitment are currently recruiting for a prestigious automotive company in the Washington / Sunderland area. The Job You’ll Do; We are looking for candidates with production / manufacturing experience. The role would see you carrying out general duties such as including machine operating, quality inspection, hand assembly, completing duties for despatch and inventory as designated by your supervisor. • Daily meetings with the team leader or supervisor, • To help prioritise workloads within the department / designated production area, • Working in a fast-paced automotive environment, • Running machinery assisting with the overall production process, • Use of hand tools to assemble components, • Hand assembly of automotive components, • Quality inspection of a range of components, • Manual Handling with heavy lifting, • Should have working knowledge of all production departments and understand the systems used, • Maintain the company’s health & safety standards at all times, • To follow all legal and company requirements to the use of forklifts in the Warehouse if applicable About You; • Previous experience in a fast-paced production / manufacturing environment, • A positive attitude and are willing to learn more skills on the job, • Confidence on the job and are happy to take on more responsibility if necessary

Rewards and Benefits on Offer; • Temp to Perm Opportunities available after a 6-month probation period, • Identified Manufacturing Career Path for progression including Industry lead training and development, • Leading Pay rates including higher overtime rates, • A well-regarded company culture, • Free on-site parking, • Excellent transportation links, • Recommend a Friend £50 gift voucher, • Christmas events and vouchers The Pay You’ll Receive; • £14.09 per hour, • Overtime 1 - £18.87 per hour, • Overtime 2 - £22.01 per hour, • Overtime 3 - £25.15 per hour The Hours You’ll Work; This position requires you to work a rotating two-shift pattern; Two Shift • 07.00 - 15.18 (Monday to Thursday) / 07.00 - 14.53 (Friday), • 15.13 - 23.31 (Monday to Friday) MTrec’s New Opportunity; MTrec Recruitment are currently recruiting for a prestigious automotive company in the Washington area. The Job You’ll Do; We are looking for candidates with production / manufacturing experience. The role would see you carrying out general duties such as including machine operating, quality inspection, hand assembly, completing duties for despatch and inventory as designated by your supervisor. • Daily meetings with the team leader or supervisor, • To help prioritise workloads within the department / designated production area, • Working in a fast-paced automotive environment, • Running machinery assisting with the overall production process, • Use of hand tools to assemble components, • Hand assembly of automotive components, • Quality inspection of a range of components, • Manual Handling with heavy lifting, • Should have working knowledge of all production departments and understand the systems used, • Maintain the company’s health & safety standards at all times, • To follow all legal and company requirements to the use of forklifts in the Warehouse if applicable About You; • Previous experience in a fast-paced production / manufacturing environment, • A positive attitude and are willing to learn more skills on the job, • Confidence on the job and are happy to take on more responsibility if necessary

Rewards and Benefits on Offer; • Temp to Perm Opportunities available after a 6-month probation period, • Identified Manufacturing Career Path for progression including Industry lead training and development, • Leading Pay rates including higher overtime rates, • A well-regarded company culture, • Free on-site parking, • Excellent transportation links, • Recommend a Friend £50 gift voucher, • Christmas events and vouchers The Pay You’ll Receive; • £15.34 per hour, • Overtime 1 - £18.87 per hour, • Overtime 2 - £22.01 per hour, • Overtime 3 - £25.15 per hour The Hours You’ll Work; This position requires you to work a rotating three-shift pattern; Three Shift • 07.00 - 15.00 (Monday to Friday), • 15.00 - 23.00 (Monday to Friday), • 20.45 - 07.00 (Sunday Night) / 23.00 - 07.00 (Monday night to Thursday) MTrec’s New Opportunity; MTrec Recruitment are currently recruiting for a prestigious automotive company in the Washington area. The Job You’ll Do; We are looking for candidates with production / manufacturing experience. The role would see you carrying out general duties such as including machine operating, quality inspection, hand assembly, completing duties for despatch and inventory as designated by your supervisor. • Daily meetings with the team leader or supervisor, • To help prioritise workloads within the department / designated production area, • Working in a fast-paced automotive environment, • Running machinery assisting with the overall production process, • Use of hand tools to assemble components, • Hand assembly of automotive components, • Quality inspection of a range of components, • Manual Handling with heavy lifting, • Should have working knowledge of all production departments and understand the systems used, • Maintain the company’s health & safety standards at all times, • To follow all legal and company requirements to the use of forklifts in the Warehouse if applicable About You; • Previous experience in a fast-paced production / manufacturing environment, • A positive attitude and are willing to learn more skills on the job, • Confidence on the job and are happy to take on more responsibility if necessary

The Company Our client are specialists in their market sector; due to expansion they are looking to recruit a Maintenance Electrician on a 2-shift system. The Role • Will be a permanent position., • To work on planned and breakdown maintenance on a range of machinery associated with production., • Planned preventative maintenance and breakdown work on production equipment., • To diagnose and repair both electrical and mechanical faults., • To minimise any down time to production., • PLC diagnostics., • Working 2 shift pattern just Monday-Thursday. The Person • You will ideally be time served., • Must be multiskilled., • Logical problem solver with excellent fault-finding abilities., • Previous manufacturing experience is essential., • PLC experience essential., • Must be happy working 2 Monday-Thursday one week days one nights., • Have knowledge of manufacturing. The Benefits • Attractive base salary with plenty of OT opportunity., • Working for a forward-thinking growing business., • Good company T’s and C’s

Rewards and Benefits on Offer; Temp to Perm Opportunities available after a 6-month probation period Identified Manufacturing Career Path for progression including Industry lead training and development Leading Pay rates including higher overtime rates A well-regarded company culture Free on-site parking Excellent transportation links Recommend a Friend £50 gift voucher Christmas events and vouchers The Pay Youll Receive; £14.09 per hour two shift £15.34 per hour three shift Overtime 1 - £18.87 per hour Overtime 2 - £22.01 per hour Overtime 3 - £25.15 per hour The Hours Youll Work; This position requires you to work either a rotating two-shift or three-shift pattern; Two Shift 07.00 - 15.18 (Monday to Thursday) / 07.00 - 14.53 (Friday) 15.13 - 23.31 (Monday to Friday) Three Shift 07.00 - 15.00 (Monday to Friday) 15.00 - 23.00 (Monday to Friday) 20.45 - 07.00 (Sunday Night) / 23.00 - 07.00 (Monday night to Thursday) MTrecs New Opportunity; MTrec Recruitment are currently recruiting for a prestigious automotive company in the Washington area. The Job Youll Do; We are looking for candidates with forklift truck experience. The role would see you carrying out general duties including goods in, picking and packing and completing duties for despatch and inventory as designated by your supervisor. Daily meetings with the team leader or supervisor To help prioritise workloads within the department / designated production area To deal with the movement of products within the warehouse, using the appropriate FLT. Line feeding using the FLT Picking and packing duties when required, and taking instructions from supervisors and management Should have working knowledge of all production departments and understand the systems used Maintain the companys health & safety standards at all times To follow all legal and company requirements to the use of forklifts in the Warehouse if applicable About You; Valid Reach FLT licence Previous experience in a fast-paced production / manufacturing environment A positive attitude and are willing to learn more skills on the job Confidence on the job and are happy to take on more responsibility if necessary TPBN1_UKTJ