Aerospace engineering jobs in Hauppauge, New YorkCreate job alerts

Job Description Position Title: Test Technician B REV000 Department: Hybrid Test Reports to: Test Technician B Job Code: 3i1171 FLSA: Hourly (Non-Exempt) EEO Category: Technicians For more than 50 years, Power Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Test Technician B performs testing procedures to ensure quality and accuracy in achieving company shipping goals. This role will work closely with the quality, engineering and operations teams to support testing efforts and maintain high standards for product reliability and performance. Key Position Accountabilities: • Set up, configure, and adjust manual or automatic test equipment, • Perform a wide variety of test procedures with minimal supervision, ensuring all tests are conducted according to established protocols., • Set up, configure, and adjust manual or automatic test equipment, • Accurately record test results and complete procedural paperwork, ensuring all test data is properly documented and logged., • Ensure adherence to testing standards, reviewing test procedures and standard operating procedures (SOPs) for completeness and accuracy., • Perform routine calibration checks and maintenance of test equipment to ensure accuracy and reliability in test results., • Work closely with engineers, quality control teams, and production staff to report test results and provide feedback on any issues or discrepancies., • Participate in continuous improvement initiatives to enhance testing processes and improve overall efficiency., • Ensure that all safety, health, and environmental policies are followed during testing procedures., • Follow safety protocols within the testing environment, including wearing the required protective gear, handling materials correctly, and maintaining a clean and safe workspace. Required Knowledge, Skills and Abilities: • Knowledge of auto-test systems, temperature control equipment, and other testing equipment., • Proficient in using a microscope to inspect components and ensure proper functionality., • Strong attention to detail and ability to follow test procedures accurately., • Organizational skills and the ability to maintain accurate records and documentation., • Ability to effectively communicate with team members., • Technical, vocational, or military training in electronics, electrical engineering, or a related field is required., • Relevant certifications or additional training in electronics testing are a plus., • 2-5 years of experience in a related test technician role or equivalent technical background., • Strong hand-eye coordination and manual dexterity to use small hand tools and microscopes with precision., • Specific vision abilities required for this job include close vision and the ability to adjust focus., • Must be able to remain stationary for extended periods while performing assembly tasks., • Must be able to lift or move items up to 25 pounds. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job DescriptionNarda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all essential functions, duties and skills required of personnel in this position. Management retains the discretion to add or change the duties at any time. The Sr. Specialist, Quality Engineering is a critical role in our organization, responsible for supporting Narda-MITEQ’s Quality Management System (QMS), driving improvements, and maintaining compliance throughout the organization. As an AS9100 accredited organization, Quality has extensive visibility and prominence at Narda-MITEQ. The successful candidate must be self-motivated, detail oriented, a team player, and capable of working closely with Production, Quality, Sales, Customer Service, and Engineering in meeting Narda-MITEQ’s customer commitments. Essential Functions: • Work with the Sales, Engineering, Finance, Inspection, Operations, Manufacturing Engineering and Supply Chain to address issues daily., • Be data driven to assess processes, take measurements, and interpret data to facilitate continuous improvement in manufacturing operations., • Report to the Quality Manager on Quality issues, metrics, and/or trends to support Management Reviews and improvement initiatives., • Have strong problem-solving skills and utilize Fishbone and 5-Why analyses., • Identify RCCA for nonconformances and customer complaints., • Investigates the cause for discrepancies and nonconformities to develop disposition and recommend corrective action plans., • Execute assigned Failure Reports, CARs, SCARs and Customer Complaints, leveraging help from other functions. Drive root cause analysis to ensure permanent fixes., • Coordinates Material Review Board (MRB)., • Serves as guide for external third-party audits, complete FAI reports and support customer source inspection as needed., • Serve as the primary interface to customers and suppliers for quality related matters., • Evaluate and make recommendations on critical supplier selections and drives supplier continuous improvement processes, including leading on-site audits, evaluating prototypes, and reviewing and approving of supplier corrective actions., • Answer questions and provide direction to employees and quality inspectors on quality related topics., • Executes AS9100 Compliance Activities (Internal and External Audits, Training)., • Conducts internal audits and work cross functionally to resolve any findings through Corrective Actions., • Create and document Quality Management System processes., • Familiar with dimensional measuring equipment (OGP, handheld measuring devices, etc.), • Bachelor's degree in engineering and a minimum of 6 years of prior relevant experience Graduate Degree and a minimum of 4 years of prior related experience., • Previous experience working in an AS9100 environment., • Working knowledge of microelectronics products., • Working knowledge of mechanical blueprints & tolerances., • Ability to interface with and effectively communicate with a broad range of customers, cross-functional teams and executive management., • Have professional communication and presence., • Technical expertise in aerospace engineering principles, attention to detail, and excellent problem-solving skills are essential for this role., • Experience building and sustaining an AS9100 Quality Management System., • Previous experience performing AS9102 First Article Inspections., • Working knowledge with industry standards including Mil-Std-883, IPC-A-610 and J-STD-001., • Experience interpreting customer contract flow downs., • Lean Six Sigma experience. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to providing a workplace that values diversity, equity, and inclusion, and ensuring all employees and applicants are treated with respect and dignity. Narda-MITEQ maintains a workplace free from unlawful discrimination, and we ensure that all qualified applicants receive equal consideration for employment regardless of race, color, religion, age, sexual orientation, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, national origin, marital status, veteran status, citizenship status, disability, or any other characteristic protected by federal, state, or local laws. We are committed to compliance with Executive Orders, including ensuring affirmative action for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and may conduct pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at . Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job Description ELECTRONIC QUALITY INSPECTOR-AEROSPACE JOB DESCRIPTION • Perform in-process inspections during various stages of production to ensure compliance with quality standards and engineering drawings., • Complete final QA audits of finished products prior to release, • Accurately enter inspection results and perform transactions in internal ERP tracking systems., • Use precision hand tools such as micrometers, calipers, and height gauges to measure and inspect parts., • Strong verbal and written communication skills., • Knowledge of JSTD-001 and IPC-610 required, • Ability to read, and understand engineering drawings and related technical documents, • Knowledge of ISO-9000 and AS9100

NO C2C This organization is focused on the design, development, and manufacture of specialty fluid and motion control products for demanding aerospace and defense applications. Its products are flying on most commercial and military aircraft, including single and twin aisle air transport, business and regional jets, military transports and fighters, and commercial and military rotorcraft. Other markets include unmanned aircraft, shipboard applications, and military ground vehicles. Position Summary The Principal Buyer will be responsible for the successful initiation, planning, execution, monitoring, controlling, and closure for the sourcing and procurement of multiple New Product Introduction (NPI) projects into production. The candidate must have significant experience with NPI through a combination of leadership and skills, including the ability to influence and coordinate activities related to various disciplines. The Principal Buyer will ensure effective NPI launch for procurement, including supplier sourcing, scheduling, cost, resource deployment, risk assessment/containment, and implementation of change management. Key focus areas include supplier sourcing/selection, early supplier engagement, price negotiations and long-term agreements (LTAs), managing lead time expectations, implementation of new technologies, manufacturing readiness, and Design for Manufacturability (DFM). Principal Activities and Responsibilities • Manage and lead procurement of multiple programs., • Lead supplier sourcing/selection, early supplier engagement, price negotiations and LTAs, and lead time expectations., • Placement and management of purchase orders., • Responsible for integrated procurement schedules throughout the project life cycle, change management, implementation of corrective actions, and supporting manufacturing readiness., • Contribute to establishing the cost basis, evaluating resource requirements, and performing procurement risk analysis., • Engage suppliers early in the NPD cycle to facilitate design for manufacturing (DFM)., • Participate in regular team project status reviews for individual projects. Refocus teams as necessary to ensure procurement requirements are met., • Participate in project gate reviews in line with project timing and internal NPI process requirements with a focus on procurement deliverables., • Organize and lead procurement efforts by defining and identifying required expertise; oversee and approve task planning including resource requirements and effort estimates., • Ensure all procurement deliverables are met for manufacturing readiness, including tooling, capital equipment, supplier selection, outside processing statements of work (SOWs), and materials., • Implement corrective actions covering all areas of procurement responsibility. Address critical supplier issues and lead the team to develop action plans to improve supplier performance and minimize impact to schedules., • Ensure procurement actions are documented, communicated, and closed by the assignee in the required timeframe. Provide weekly written status to leadership., • Engage in material review board meetings to discuss disposition and recovery of non-conforming material. Knowledge, Skills & Abilities • Proficiency in supplier sourcing/selection, early supplier engagement, price negotiations and LTAs, managing lead time expectations, implementation of new technologies, manufacturing readiness, and DFM., • Ability to work in a cross-functional environment. Strong results/goal orientation. Agility and adaptability in a rapidly changing environment., • Problem-solving skills; develops alternative solutions; works well in a team atmosphere., • Practical knowledge of aerospace, defense, and commercial procurement requirements and production processes., • Proficient in business applications software (MS Office) and project management tools (MS Project)., • Strong communication skills across all mediums and audiences., • High ethical standards; models and supports organizational goals and values., • Understanding of requirements management, including change configuration management, traceability, validation and verification, and scope management., • Bachelor’s degree (BS/BA) in Engineering, Sciences, Business, or a related field preferred., • US Citizenship required

About the Role We are seeking an experienced Production/Material Planner to join our Interiors division in Bohemia, NY. Reporting to the Senior Materials Planning SIOP Manager, this role is responsible for overseeing the supply and demand planning process, improving planning systems, and ensuring predictable business performance. The ideal candidate will apply strong analytical skills, forecasting experience, and production planning knowledge to drive efficiency and deliver exceptional service to customers. Key Responsibilities • Manage scheduling processes, including qualitative and quantitative monitoring of production dates., • Plan, schedule, and maintain sales plans while supporting production orders., • Create and maintain valid work orders, due dates, and closure timelines., • Conduct Can-Build build analysis to ensure production readiness., • Analyze pre-order requests for material and labor availability to support customer requirements., • Monitor customer requirements and develop a level-loaded Master Production Schedule (MPS)., • Maintain short- and long-term SIOP capacity profiles using standard tools., • Optimize inventory levels to balance customer service and inventory turns., • Lead cross-functional production meetings and communicate across all organizational levels., • Develop weekly and monthly sales estimates for assigned product lines., • Manage Item Master (IM) Planning Parameters to support replenishment strategies., • Proactively identify, prioritize, and track shortages., • Collaborate with New Product Introduction (NPI) teams, supporting planning bills of materials, prototype builds, and production readiness activities. Required Qualifications • Bachelor’s degree and a minimum of 5 years of relevant experience, OR, • Advanced degree in a related field with a minimum of 3 years of experience, OR, • In lieu of a degree, 9 years of directly relevant experience. Preferred Qualifications • Aerospace industry or manufacturing environment experience., • Prior experience in production/material planning and forecasting operations., • Advanced proficiency in MS Excel (including VLOOKUP, Pivot Tables, Macros) as well as MS Word and PowerPoint., • Familiarity with bills of materials and engineering drawings., • Working knowledge of Lean, Kaizen, or other continuous improvement methodologies (certification not required).

NPI Principal Buyer BUSINESS: Aerospace & Defense LOCATION: Hauppauge, NY DIRECT REPORTING: Sr. Manager, Supply Chain About CIRCOR Aerospace & Defense CIRCOR Aerospace & Defense is focused on the design, development, and manufacture of specialty fluid and motion control products for demanding aerospace and defense applications. CIRCOR products are flying on most commercial and military aircraft, including single and twin aisle air transport, business and regional jets, military transports and fighters, and commercial and military rotorcraft. Other markets include unmanned aircraft, shipboard applications, and military ground vehicles. Business units are in Hauppauge New York; Corona, California; Warren, Massachusetts; Paris, France; Uxbridge, UK; and Tangier, Morocco. Parent company CIRCOR International is headquartered in Burlington, Massachusetts and CIRCOR Aerospace & Defense is headquartered in Corona, California. Position Summary The NPI (New Product Introduction) Principal Buyer will be responsible for the successful initiation, planning, execution, monitoring, controlling and closure for the sourcing and procurement of multiple New Product Introduction projects into production. The candidate must have significant experience with NPI through a combination of leadership and skills, including the ability to influence and coordinate activities related to various disciplines. The NPI Principal Buyer will ensure effective NPI launch for procurement, including supplier sourcing, scheduling, cost, resources deployment, risk assessment/containment and implementation of change management. Key focus of the NPI Principal Buyer will include supplier sourcing / selection, early supplier engagement, price negotiations and LTAs, managing lead time expectations, implementation of new technologies, manufacturing readiness, Design for Manufacturability (DFM). You Will: · Manage and lead procurement of multiple NPI programs. · Lead supplier sourcing / selection, early supplier engagement, price negotiations and LTAs, and lead time expectations · Placement and management of NPI purchase orders. · Responsible for integrated procurement schedules throughout the project life cycle, change management, implementation of corrective actions, and supporting manufacturing readiness. · Contributor to establishing the cost basis, evaluating resource requirements, and performing procurement risk analysis. · Supplier Sourcing / selection, engaging suppliers early in the NPD cycle to facilitate design for manufacturing (DFM). · Participate in regular team project status reviews for individual projects. Refocus teams as necessary to ensure procurement requirements are met. · Participate in project gate reviews in line with project timing and internal NPI process requirements with a focus on procurement deliverables · Organizes and leads procurement efforts by defining and identifying required expertise; Oversees and approves task planning to include resource requirements and effort estimates related to procurement. Establishes and communicates overall priorities and changing procurement requirements, including impact to schedules to functional areas. · Ensures all procurement deliverables are met for manufacturing readiness, including tooling, capital equipment, supplier selection, outside processing SOWs, and materials. · Implementation of corrective actions covering all areas of NPI procurement responsibility. Addresses critical supplier issues and leads the team to develop action plans to improve supplier performance and minimize impact to schedules. · Ensures procurement actions are documented, communicated and closed by the assignee in the timeframe required. Provides weekly written status to leadership. You Have: Knowledge, Skills & Abilities · Experience: Demonstrated ability to perform the essential functions of the job typically acquired through ten or more years of related work experience; including five or more years leading procurement activities for multiple NPI projects/programs of varying complexity and scope. Prior experience of working with cross functional teams is required. Core Competencies · Knowledge and proficiency in supplier sourcing / selection, early supplier engagement, price negotiations and LTAs, managing lead time expectations, implementation of new technologies, manufacturing readiness, Design for Manufacturability (DFM), · Ability to work in a cross-functional environment. Ability to prioritize, balance, and manage multiple efforts with strong results/goal orientation. Agility and personal adaptability with the ability to successfully manage multiple priorities with a high sense of urgency in a rapidly changing environment. · Identifies and resolves problems in a timely manner; develops alternative solutions; works well in a team atmosphere. · Practical knowledge of Aerospace, Defense, and Commercial procurement requirements and production processes · Proficient in the use of business applications software (MS Office) and the ability to use specialized project management (MS Project) applications. · Strong communication (oral and written), skills. Effectively communicates across all mediums, audiences, and situations. · High ethical standards. Models and supports organization's goals and values; adapts to changing conditions; demonstrates persistence and overcomes obstacles. · Understanding of Requirements Management, including change configuration management, traceability, validation and verification and scope management · Displays original thinking and creativity; meets challenges with resourcefulness; focus on continuous process improvement. Education · Bachelor's degree (BS/BA) in Engineering, Sciences, Business or a related field preferred; minimum of 10 years prior NPI procurement, supplier sourcing, price and lead time negotiations. SALARY RANGE: $90,000 - $100,000 Pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience. CIRCOR is an EEO Employer of Females / Minorities / Veterans / Individuals with Disabilities Our Benefits: • Comprehensive healthcare plans, • PTO and family leave, • 401(K), • Work Life Balance, • Career Development, • Other Benefits & Perks Why CIRCOR: • Work in a collaborative and innovative environment with a focus on professional growth., • Contribute to a diverse and inclusive workforce that values individuality and creativity., • Competitive compensation package and comprehensive benefits.

Job Description Power Device Corporation (PDC) is a world leader in the design and manufacture of high-reliability Power and Control solutions (Components to Space Qualified SBCS and Radiation Hardened Components; Power Distribution, Control, and Conversion; Motor Control and Motion Feedback) for aerospace, defense, space, and industrial applications. PDC has served these industries as a trusted resource for more than 50 years…providing proven solutions that are optimized for efficiency, reliability, and performance. Power Device Corporation is headquartered in Bohemia, NY and has manufacturing operations in New York, California, and the United Kingdom. To continue to meet our customer’s mission critical needs, PDC is seeking a Test Engineer to join our respected and valued team. This role is 100% onsite in our Bohemia, NY office. This position requires a U.S Person or a person who can qualify for a department of state or commercial license. The salary range for this role is $80,000-$100,000. Job Description - Test Engineer This person will be responsible for maintaining, repairing, upgrading and troubleshooting production test equipment ranging from small manual fixtures up to large automated test stands. This equipment is used to test a myriad of products including small components up to large LRUs. This role reports into the Sustaining Test Engineering Manager and falls under the Operations organizational chart. Responsibilities / Experience Required: • Experience using lab equipment such as oscilloscopes, DVMs and AC/DC power supplies, • Ability to read and understand electronic schematics, • Capable of drawing schematics in Cadence OrCAD, • Good problem solving skills, • Report and respond to test equipment failures in a timely matter, • Experience maintaining test documentation / procedures, • Experience installing / updating test hardware and software, • Experience with CAN, I2C, GPIB, RS485 and RS232 communications, • Experience reading and writing test code using Visual basic, C++ and C#, • Strong skill set in Microsoft Office (Word, Excel, PowerPoint, Outlook), • Working knowledge of Microsoft Access, • Able to perform all duties listed above with minimal supervision or technical guidance, • Must be self-motivated, conscientious, reliable and responsible, • Must exhibit good decision-making skills, • A minimum 2 year degree in Engineering Technology with an Electronics focus, • 4-yr degree in Electrical / Computer Engineering is preferred, • At least 2 years of related work experience that includes the following:, • fabricating prototype circuits from schematics, • testing and troubleshooting complex test stations, • basic AC, DC and semiconductor circuit theory, • utilizing lab equipment such as oscilloscopes, DMM and AC/DC power supplies Benefits of working at PDC • People–Focused Policies, • Career Development, • Medical/Dental/Vision Coverage, • Generous Paid Time Off, • 401k with Employer Match, • Tuition Reimbursement, • Employee Referral Program, • Childcare Subsidy Program, • Fitness Center Reimbursement Power Device Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Position Summary The Manufacturing Engineer will work within the Engineering Department to create and evaluate existing manufacturing processes for vertical and horizontal lathes, and multi-axis milling machines. Responsibilities • Develop cost effective manufacturing process to support 4-5 axis machining centers, • Design cost effective and quick changeover manufacturing fixtures and tooling, • Create shop floor documentation including operation sheets and work instructions, • Implement cost reduction initiatives utilizing Lean Manufacturing techniques, • Initiate corrective actions to floor processes, • Cost estimating and quoting, • Participation in lean and continuous improvement events Qualifications: • Experience with Aerospace materials, • Proficient with Unigraphics NX4-5, CAM and 3D modeling, • Must be accustomed to deadlines and accountability, • Experience with complex aerospace parts including milling and turning processes, • Lean manufacturing techniques, • Effective time management skills including multi-tasking, • Ability to read blueprints. Speak and write reports in English., • High attention to detail., • Develop and follow procedures., • 3+ years experience Job Posted by ApplicantPro Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

Job DescriptionLHH Recruitment Solutions has an opening for an Account and Sales Manager for our client in the Bohemia, NY area. This direct hire role allows you to expand your account management career within a state-of-the-art technology organization. This on-site position requires a minimum of five-years current experience, a bachelor’s degree in electrical or electro-mechanical engineering as well as experience in conducting technical presentations, trade shows and experience in a OEM environment. Successful candidates will have several years within the aerospace/aeronautics/defense/security fields. Salary range: $75,000.00 - $100,000 plus commission structure RESPONSIBILITIES: • Identify and pursue new business opportunities by conducting market research., • Analyzing market surveys and attend related tradeshows, exhibitions, and conferences., • Generate sales leads, set client appointment, prepare, deliver, and explain quotes, traveling to customer negotiations and closing orders, and assisting with product shipment as needed., • Maintain relationship with OEM customers by making visits and phone calls., • Schedule and conduct technical presentations for current and new customers., • Develop and execute sales plans to achieve objectives – KPIs, revenue, profitability, and market share., • Achieve annual booking plan on a quarterly basis., • Observe and maintain a real time sales forecast, sales database and reporting results., • Collaborate with cross-disciplinary engineering team and operations department., • Able and willing to travel to customer sites or other company locations worldwide (approximately 20%) REQUIREMENTS: • REQUIRED - Bachelor’s Degree in electrical or electro-mechanical discipline., • Experience in a OEM environment., • Willingness to learn and be hands on in a technical environment., • Proven well established verbal and written communication skills., • Highly proficient in Microsoft Office Suite of Tools., • Strong analytical, problem-solving skills and time management., • Ability to operate independently with minimal guidance by management., • Demonstrated proven history of successful sales management and quota achievement., • Willingness and ability to travel domestically and internationally., • Ability to read schematics highly preferred., • Superior proven technical presentation skills. Health insurance, dental insurance, life insurance and several other benefits are offered with this full time direct hire role. Pay Details: $75,000.00 to $100,000.00 per year Search managed by: Laura Orozco Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. ]]>

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office with occasional travel to manufacturing location in Mexico. The salary range for this position is $80,000 to $110,000 annually and will depend upon experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Manufacturing Engineer is responsible for creating efficient manufacturing processes for new and existing products. Communication between Design Engineer and Manufacturing is critical. The Manufacturing Engineer will evaluate and make improvements to existing and new methods and materials to maximize process efficiency and quality. Key Position Accountabilities: • Design and Development: Plan, conceptualize, and develop manufacturing processes for both new and sustaining products., • Equipment and Materials Research: Actively seek out opportunities improve existing processes by keeping up with new equipment and material releases. Seek out ways to integrate new equipment and materials to improve productivity., • Collaboration: Work closely with engineers, managers, and other design professionals in the development of prototypes, sustaining efforts, and integration of systems into manufacturing processes. Support the transition of designs from concept to prototype and to full-scale production., • Testing and Validation: Review and verify test setups and support the execution of testing procedures required for product acceptance and qualification. Collaborate with internal and external facilities to validate design performance against defined specifications., • Engineering Analysis: Perform detailed engineering calculations to support manufacturing decisions, to predict and optimize manufacturing performance with respect to productivity., • Material Selection and Development: Choosing the right material for a specific application, considering factors like strength, durability, cost and environmental impact, • Documentation and Compliance: Create, review, and maintain technical drawings, specifications, and product documentation using a mix of CAD, MS Word, and digital images. Ensure designs and processes meet industry and regulatory standards, including internal engineering standards and product definition procedures., • Hands on Process development: Soldering and general manufacturing assembly best practices., • Mathematical and Analytical Skills: Strong ability to apply engineering fundamentals, and statistical methods to evaluate return on investment of implementation of new processes., • Problem Solving and Innovation: Excellent troubleshooting and critical thinking skills with the ability to propose innovative solutions to complex manufacturing challenges., • Communication Skills: Strong verbal and written communication skills, with the ability to present technical information clearly to both technical and non-technical stakeholders. Excellent interpersonal skills to work collaboratively across teams. Bilingual in English and Spanish is beneficial., • Bachelor of Science in Manufacturing, Mechanical, or Industrial Engineering., • 3+ years of related experience., • Working Knowledge of Military Specifications., • This position operates in a mix of office, manufacturing, and lab-based environment., • Must be able to remain stationary during design and analysis sessions., • Must have good manual dexterity and basic soldering / assembly skills to assist in building test and assembly fixtures, • Ability to lift and move up to 25 pounds of testing or prototyping equipment., • Frequent communication with cross-functional teams; ability to convey complex technical details clearly and effectively. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description QA Intern – Fall 2025 Job Summary: We are seeking a detail-oriented and proactive Quality Assurance Intern to support our QA team, with a primary focus on reviewing, revising, and maintaining Standard Operating Procedures (SOPs). This role provides hands-on experience in the highly regulated Aerospace and Defense industry, while building core skills that are widely applicable across sectors such as automotive, healthcare, manufacturing, and software. The compensation for this role is $20-$22 hourly based on experience. Key Responsibilities: · Assist in the review, editing, and updating of SOPs to ensure clarity, consistency, and compliance with internal standards and regulatory requirements. · Collaborate with subject matter experts (SMEs) to verify accuracy of SOP content. · Help organize and maintain the SOP library in the document control system. · Participate in internal audits and help track document-related corrective and preventive actions (CAPAs). · Provide administrative support to the QA team, including preparing reports and summaries related to SOP status. · Attend QA team meetings and contribute to ongoing quality improvement initiatives. Preferred Qualifications: · Current enrollment in a Bachelor's or Master’s degree program in Quality Assurance, Life Sciences, Engineering, Business, or a related field. · Strong written and verbal communication skills. · Excellent attention to detail and organizational abilities. · Proficiency in Microsoft Office Suite (Word, Excel, etc.). · Ability to work independently and manage multiple tasks. What You Will Gain: · Practical experience working with a professional QA team · Exposure to compliance documentation and quality system processes · Opportunity to improve skills in technical writing and internal communication · A solid understanding of the role of SOPs in maintaining product and process quality

Job Description Location: Hauppauge, NY or Sparks, MD Schedule: Full-time (9/80) Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all essential functions, duties and skills required of personnel in this position. Management retains the discretion to add or change the duties at any time. Position Summary: We are seeking a results-driven finance professional to lead and support comprehensive financial planning, analysis, and reporting activities of a multi-site international business unit. This role serves as a key business partner to senior leadership overseeing financial consolidation, operational reviews, strategic planning, and compliance with corporate financial requirements. The ideal candidate will possess a strong analytical mindset, excellent communication skills, and the ability to collaborate across functions to drive business results. Essential Duties and Responsibilities: • Lead the development of annual financial business plans, strategic plans, and financial forecasts., • Prepare and analyze monthly, quarterly, and annual financial statements, including consolidations across multiple entities., • Oversee and coordinate budgeting, forecasting, and variance analysis processes across departments and business units., • Perform detailed financial studies and analyses, including:, • Headcount, expense, overhead, and capital expenditure analysis, • Variance analysis (actual vs. forecast, plan and prior year), • Revenue, profit, working capital and cash flow forecasting, • Risk and opportunity assessments, • Cost structure, rate modeling, and indirect rate analysis, • Lead monthly Business Review consolidations., • Develop, standardize, and automate financial reporting tools, including database alignment and system improvements (e.g. Visual to SAP BPC integration)., • Provide actionable insights, recommendations, and corrective action plans to support leadership decisions., • Collaborate with cross-functional stakeholders including Program Management, Business Development, Engineering, and Accounting to ensure data accuracy and alignment., • Ensure compliance with corporate policies and Generally Accepted Accounting Principles (GAAP)., • Prepare and submit corporate reports as required., • Bachelor’s degree in accounting, Finance, Economics or related field required with a minimum of 6 years of progressive experience in financial planning, corporate accounting, reporting, and forecasting, preferably in an aerospace and defense manufacturing environment or Graduate Degree with a minimum of years of 4 years progressive experience as listed above., • Knowledge of indirect rate development, rate variance analysis, and EAC processes., • Experience with government contracts (CPAF, CPIF, CPFF, T&M, FFP) and related financial management practices., • Strong quantitative and qualitative analytical skills., • Excellent verbal and written communication skills; ability to effectively present financial information to leadership., • Advanced proficiency with Microsoft Office (Excel, PowerPoint) and financial systems such as:, • SAP BPC, • Visual Finance Systems, • We offer a collaborative, inclusive environment with opportunities for professional growth and leadership development. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to providing a workplace that values diversity, equity, and inclusion, and ensuring all employees and applicants are treated with respect and dignity. Narda-MITEQ maintains a workplace free from unlawful discrimination, and we ensure that all qualified applicants receive equal consideration for employment regardless of race, color, religion, age, sexual orientation, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, national origin, marital status, veteran status, citizenship status, disability, or any other characteristic protected by federal, state, or local laws. We are committed to compliance with Executive Orders, including ensuring affirmative action for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and may conduct pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at . Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job Description LHH Recruitment Solutions has an opening for an Account and Sales Manager for our client in the Bohemia, NY area. This direct hire role allows you to expand your account management career within a state-of-the-art technology organization. This on-site position requires a minimum of five-years current experience, a bachelor’s degree in electrical or electro-mechanical engineering as well as experience in conducting technical presentations, trade shows and experience in a OEM environment. Successful candidates will have several years within the aerospace/aeronautics/defense/security fields. Salary range: $75,000.00 - $100,000 plus commission structure RESPONSIBILITIES: • Identify and pursue new business opportunities by conducting market research., • Analyzing market surveys and attend related tradeshows, exhibitions, and conferences., • Generate sales leads, set client appointment, prepare, deliver, and explain quotes, traveling to customer negotiations and closing orders, and assisting with product shipment as needed., • Maintain relationship with OEM customers by making visits and phone calls., • Schedule and conduct technical presentations for current and new customers., • Develop and execute sales plans to achieve objectives – KPIs, revenue, profitability, and market share., • Achieve annual booking plan on a quarterly basis., • Observe and maintain a real time sales forecast, sales database and reporting results., • Collaborate with cross-disciplinary engineering team and operations department., • Able and willing to travel to customer sites or other company locations worldwide (approximately 20%) REQUIREMENTS: • REQUIRED - Bachelor’s Degree in electrical or electro-mechanical discipline., • Experience in a OEM environment., • Willingness to learn and be hands on in a technical environment., • Proven well established verbal and written communication skills., • Highly proficient in Microsoft Office Suite of Tools., • Strong analytical, problem-solving skills and time management., • Ability to operate independently with minimal guidance by management., • Demonstrated proven history of successful sales management and quota achievement., • Willingness and ability to travel domestically and internationally., • Ability to read schematics highly preferred., • Superior proven technical presentation skills. Health insurance, dental insurance, life insurance and several other benefits are offered with this full time direct hire role. Pay Details: $75,000.00 to $100,000.00 per year Search managed by: Laura Orozco Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Location: Hauppauge, NY | Onsite About Narda-MITEQ Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ is a trusted name in RF, microwave, and fiber optic technologies, known for delivering high-performance components and subsystems used in mission-critical applications. For more than 70 years, we’ve supported customers across defense, aerospace, space, communications, and industrial markets with both custom-engineered and off-the-shelf solutions. Our commitment to quality, innovation, and technical excellence continues to drive our success. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all essential functions, duties and skills required of personnel in this position. Management retains the discretion to add or change the duties at any time. Job Description: The Quality Manager is a key member of the site leadership team and is responsible for planning, developing, and directing the quality team, policies, programs and initiatives. They will establish and manage metrics to ensure that products meet customer specifications and are consistent with the quality standards of the Company. In addition, this individual will be responsible for the development and implementation of strategic plans and improvement initiatives targeting reliability, supplier quality and cost of poor quality. This role will be a single point of accountability for Quality for the division. Essential Functions: • Manage and maintain the AS9100 QMS certification., • Ensure total product integrity by providing leadership in establishing a common quality vision, a positive culture & structure and in continually improving processes., • Manage the team to retain & build organizational talent., • Develop, implement and monitor all key quality metrics, systems, and procedures., • Defines quality objectives and functional responsibilities., • Develop and implement strategies to increase performance against identified KPI’s, reduce the cost of poor Quality, and improve product performance., • Contributes to the quality improvement efforts of the company by following a structured continuous improvement approach and focusing on root cause identification and correction., • Oversees customer and supplier quality audit programs. Ensure that the audit programs are maintained as required by internal/external policies and procedures., • Manage customer score cards and warranty returns while actively interfacing with customers, inside sales, product line management, and engineering on quality issues, specifications and agreements for positive customer satisfaction., • Stimulates cooperation between teams to enable issue resolution., • Work with both suppliers and customers to ensure the highest level of quality throughout the value stream., • Team with the Supply Chain organization to develop, implement, and manage supplier metrics., • Contributes to the achievement of company objectives by playing an active role in the strategic planning process including the development of quality targets for continuous quality improvement., • Manage the quality organization's budget, in support of meeting the company’s financial commitments., • Bachelor’s degree in engineering or closely related field with a minimum of 9 years of relevant professional experience or a Graduate degree with a minimum of 6 years relevant experience, in electronics manufacturing environment preferably in the Aerospace and Defense industry., • Must have a thorough working knowledge of the various customer and industry quality system models including ISO9000 and AS9100., • Professional communication and presence., • Proven ability to effectively contribute to the quality improvement efforts of the company., • Six Sigma / Lean experience preferred., • Must be able to obtain and maintain a DoD Secret security level clearance. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to providing a workplace that ensures all employees and applicants are treated with respect and dignity. Narda-MITEQ maintains a workplace free from unlawful discrimination and we ensure that all qualified applicants receive equal consideration for employment. Narda-MITEQ is a drug-free workplace and may conduct pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at . Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job DescriptionLHH Recruitment Solutions has an opening for an Account and Sales Manager for our client in the Bohemia, NY area. This direct hire role allows you to expand your account management career within a state-of-the-art technology organization. This on-site position requires a minimum of five-years current experience, a bachelor’s degree in electrical or electro-mechanical engineering as well as experience in conducting technical presentations, trade shows and experience in a OEM environment. Successful candidates will have several years within the aerospace/aeronautics/defense/security fields. Salary range: $75,000.00 - $100,000 plus commission structure RESPONSIBILITIES: • Identify and pursue new business opportunities by conducting market research., • Analyzing market surveys and attend related tradeshows, exhibitions, and conferences., • Generate sales leads, set client appointment, prepare, deliver, and explain quotes, traveling to customer negotiations and closing orders, and assisting with product shipment as needed., • Maintain relationship with OEM customers by making visits and phone calls., • Schedule and conduct technical presentations for current and new customers., • Develop and execute sales plans to achieve objectives – KPIs, revenue, profitability, and market share., • Achieve annual booking plan on a quarterly basis., • Observe and maintain a real time sales forecast, sales database and reporting results., • Collaborate with cross-disciplinary engineering team and operations department., • Able and willing to travel to customer sites or other company locations worldwide (approximately 20%) REQUIREMENTS: • REQUIRED - Bachelor’s Degree in electrical or electro-mechanical discipline., • Experience in a OEM environment., • Willingness to learn and be hands on in a technical environment., • Proven well established verbal and written communication skills., • Highly proficient in Microsoft Office Suite of Tools., • Strong analytical, problem-solving skills and time management., • Ability to operate independently with minimal guidance by management., • Demonstrated proven history of successful sales management and quota achievement., • Willingness and ability to travel domestically and internationally., • Ability to read schematics highly preferred., • Superior proven technical presentation skills. Health insurance, dental insurance, life insurance and several other benefits are offered with this full time direct hire role. Pay Details: $115,000.00 to $120,000.00 per year Search managed by: Laura Orozco Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. ]]>

Job DescriptionSUMMARY: Embedded Senior Software Engineer who has working experience designing, developing and verifying embedded software in aerospace and/or industrial applications. The candidate should be familiar with industry-standard software development and design assurance practices (such as DO-178, ISO 26262, EN 50128, IEC 61508 or IEC 62304) and their application across the entire software development lifecycle. FUNCTIONS: Our charter is to develop fuel measurement, management and inerting systems for commercial and defense airframers. The Software Engineering team works closely with the Systems and Electronic Hardware Engineering teams to develop, qualify and certify these technologies as products for our customers in aerospace and industrial markets. The individual will have the following responsibilities (not an inclusive list): • Develop embedded software using C and/or model-based tools such as SCADE, • Develop high level and low-level software requirements, • Create requirements-based test cases and verification procedures, • Perform software integration testing on target hardware using both real and simulated inputs/outputs, • Analyze software requirements, design and code to assure compliance to standards and guidelines, • Perform traceability analysis to customer specification requirements to software code, • Participate in software certification audits, e.g. stages of involvement (SOI) REQUIRED: • BS in Software Engineering, Computer Engineering, Computer Science or related field, • 5+ years of experience performing software development, verification and/or integration, • Strong technical aptitude with analytical and problem-solving capabilities, • Excellent interpersonal and communication skills, both verbal and written, • Ability to work in a team environment, cultivate strong relationships and demonstrate initiative HIGHLY PREFERRED: • Experience with C programming language, • Experience with model-based software development using SCADE, • Experience developing embedded software control systems, • Experience planning and executing projects using Agile software development methodology, • Experience managing requirements using DOORS or DOORS Next Gen (DNG), • Experience with digital signal processing or digital filter design, • Experience with ARM microprocessors, • Experience with serial communication protocols (e.g. CANbus, ARINC, RS-232), • Familiarity with aerospace (e.g., DO-178, DO-330, DO-331) and/or industrial (e.g., IEC 61508) software certification requirements, • Familiarity with functional safety standards such as ISO 13489, IEC 61508, IEC 62061, ISO 26262 or ARP4761Software Engineer to join our team., • We are looking for a candidate who has working experience designing, developing and verifying embedded software in aerospace and/or industrial applications., • The candidate should be familiar with industry-standard software development and design assurance practices (such as DO-178, ISO 26262, EN 50128, IEC 61508 or IEC 62304) and their application across the entire software development lifecycle.

Job Description Position Summary The Manufacturing Engineer will work within the Engineering Department to create and evaluate existing manufacturing processes for vertical and horizontal lathes, and multi-axis milling machines. Responsibilities • Develop cost effective manufacturing process to support 4-5 axis machining centers, • Design cost effective and quick changeover manufacturing fixtures and tooling, • Create shop floor documentation including operation sheets and work instructions, • Implement cost reduction initiatives utilizing Lean Manufacturing techniques, • Initiate corrective actions to floor processes, • Cost estimating and quoting, • Participation in lean and continuous improvement events Qualifications: • Experience with Aerospace materials, • Proficient with Unigraphics NX4-5, CAM and 3D modeling, • Must be accustomed to deadlines and accountability, • Experience with complex aerospace parts including milling and turning processes, • Lean manufacturing techniques, • Effective time management skills including multi-tasking, • Ability to read blueprints. Speak and write reports in English., • High attention to detail., • Develop and follow procedures., • 3+ years experience Job Posted by ApplicantPro

Job Description CNC Programmer The CNC programmer works within the Engineering Department to create and evaluate existing CNC programs for vertical and horizontal lathes, and multi-axis milling machines. Specific Responsibilities: • Ability to create and evaluate and improve existing CNC programs for vertical and horizontal lathes, and multi-axis (4-5 axis) milling machines., • Solid understanding of feeds and speeds for aerospace materials., • Be a team player for all lean activities continuous improvement projects., • Tool selection and process layout on a consistent basis, working with customers to ensure work can be accomplished., • Create shop floor documentation including operation sheets and work instructions, • Must be accustomed to deadlines and accountability, • Experience with complex aerospace parts including milling and turning processes, • Unigraphics NX experience, • Lean manufacturing techniques, • Effective time management skills including multi-tasking, • Ability to read blueprints. Speak and write reports in English., • High attention to detail., • Develop and follow procedures. Benefits: Medical, RX, Hospitalization - 100% Employer paid (Single through Family coverage) Dental - 100% Employer paid (Single through Family coverage) Vision Life Insurance - 100% Employer paid Long Term Disability - 100% Employer paid Paid Time Off, Sick Time, Holidays 401k FSA AFLAC Air Industries Group is an Equal Opportunity Employer Minority / Women / Disability / Veteran / Gender Identity / Sexual Orientation / Age. Job Posted by ApplicantPro

Job Description Join North Wind Systems – Accelerating Hypersonic Innovation At North Wind, we are advancing hypersonic technologies through cutting-edge research, system development, and flight testing. Our team drives innovation in high-speed aerodynamics, propulsion systems, and mission-critical components, supporting every phase of hypersonic programs—from R&D to flight testing. If you are passionate about pushing technological boundaries in a dynamic environment, we invite you to join us. The Lead Engineering Analyst will conduct analysis on designs of R&D prototype components and assemblies. Responsibilities: • Performs thermal and structural analysis of product components and assemblies using finite element or hand calculation methods., • Lead a small team of analysts, providing mentorship, reviewing output of team members, and driving analysis tasks to closure. Manages analysis related budgets and schedules and tracks team performance accordingly., • Reviews customer specifications and internal methods to plan analysis activities, determine loading conditions and develop appropriate acceptance criteria., • Supports customer interface meetings and design reviews by presenting analysis plans, status and results as required., • Bachelor’s degree in engineering discipline with 10+ years of related experience, or a combination of education and experience equivalent to above., • Candidate should have excellent communication skills and enjoy working in a fast-paced work environment., • Must be a self-starter, able to work on multiple projects, and prioritize workload., • General familiarity with aerospace research and development test products such as wind tunnel models, test engines and prototype devices; and analysis of these in the subsonic, transonic and hypersonic realms., • Working knowledge of computer-aided modeling codes (NX or SOLIDWORKS preferred), • Expert knowledge of Finite Element Analysis techniques and codes (ANSYS preferred), • Expert knowledge of steady state, transient, modal, buckliing, harmonic response, and random vibration analysis. Also familiar with the modeling of nonlinearities such as contact, material plasticity, large deflections, etc., • Expert ability for performing textbook hand calculations for axial/bending/torsional stress, beam deflection, and free body diagrams, and 1D fluid flow., • Familiarity with Computation Fluid Dynamics work such that you can supervise CFD team members while not necessarily performing the work., • Familiarity with ASME Section VIII pressure vessel design and calculations., • Working knowledge of Mechanics of Materials for the purposes of obtaining material strength and fatigue limits for a wide range of materials including metals, composites, castings, weldments and 3D printed parts., • Working knowledge of stress-based and strain-based fatigue. North Wind is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. North Wind supports safe and drug free workplace through pre-employment background checks and drug testing. The salary range provided is a general guideline. Actual pay will depend on several factors, including, but not limited to, education, experience, training, and other applicable qualifications. North Wind is committed to pay transparency in compliance with applicable state and local laws. All candidates must be eligible to work in the United States.

Job Description Mission Critical … Join PDC and make a Difference For more than 50 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. To continue to meet our customer’s mission critical needs, PDC is seeking a Process Engineer - Intern to join our respected and valued team. This position is 100% onsite in our Bohemia, NY corporate headquarters. *We are not accepting applications from independent recruiters or agencies at this time for this role; should this change the posting will be updated to reflect submission information. Responsibilities: • Process Engineer to support CCA manufacturing., • Knowledge of CCA assembly, machine automation, AOI inspection, problem solving skills and Root Cause Correction Action., • Ability to maintain schedules., • Work in a team environment, • Cross train, • Seeking a B.S in Engineering discipline or A.S This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Join North Wind – Accelerating Hypersonic Innovation At North Wind, we are advancing hypersonic technologies through cutting-edge research, system development, and flight testing. Our team drives innovation in high-speed aerodynamics, propulsion systems, and mission-critical components, supporting every phase of hypersonic programs—from R&D to flight testing. If you are passionate about pushing technological boundaries in a dynamic environment, we invite you to join us. The Chief Digital Engineer is a key position that reports to executive leadership and is responsible for developing and executing the company’s digital engineering vision in alignment with corporate strategy and program needs. Leads the adoption of model-based systems engineering, digital twins, and advanced simulation tools to drive innovation, improve system integration, and enhance program execution across all phases of development. Requires experience in hypersonic system development and test & evaluation. Responsibilities: Digital Strategy & Innovation: Develop and implement a comprehensive digital strategy aligned with business goals, driving innovation and growth through technology. Drive the adoption of emerging technologies and innovative engineering methodologies to enhance product development, improve operational efficiency, and create competitive advantages. Technology Leadership: Oversee the development and implementation of digital solutions, including software, platforms, and infrastructure. Supporting complex engineering and program requirements with a focus on high-speed and hypersonic systems for ground and flight testing. Ensure these solutions meet complex technical and programmatic requirements while adhering to industry standards and best engineering practices. Collaborate closely with multidisciplinary engineering teams to align technology strategies with project goals, driving innovation, reliability, and scalability. Team Management: Provide leadership, mentorship, and strategic direction to multidisciplinary engineering teams. Foster a collaborative and inclusive work environment that encourages innovation, accountability, and professional growth. Promote best practices in agile development, systems engineering, and quality assurance to ensure the consistent delivery of high-quality software and technical solutions. Champion continuous improvement through regular feedback, training opportunities, and performance development initiatives to maximize team effectiveness and align with organizational goals. Technical Expertise: Spearhead strategic initiatives to identify, develop, and integrate emerging technologies that enhance future capabilities and offerings with a focus on hypersonic and high speed systems. Provide technical leadership and guidance on architecture, design, and implementation of digital solutions, ensuring they are scalable, reliable, and secure. Cross-functional Collaboration: Partner with Division and Functional leadership to ensure alignment and seamless integration of digital initiatives. Performance Monitoring & Optimization: Track and analyze digital performance metrics, providing insights and recommendations for improvement. Preferred Education / Experience: • Advanced degree in Aerospace Engineering or a related discipline, • Minimum 20 years of relevant experience in product engineering and planning., • Deep understanding of engineering principles, including mechanical, electromechanical, and aeronautical systems design, test, and evaluation with a emphasis on hypersonics., • Proficiency in interpreting engineering plans, technical drawings, and specifications., • Ability to define complex problems, analyze data, interpret abstract concepts, and develop effective solutions., • Strong knowledge of digital engineering tools and technologies, including model-based systems engineering (MBSE), computational fluid dynamics (CFD), AI/ML, IoT, DevOps, and cloud-based platforms., • Demonstrated success leading high-performing engineering teams and driving digital transformation initiatives., • Skilled in project management, prioritization, budgeting, and delivering results on time., • Familiarity with Department of Defense (DoD) acquisition processes, R&D funding, and technology development programs., • Excellent written and verbal communication skills, with the ability to tailor messaging to technical and non-technical audiences., • Proficient in Microsoft Office and engineering-related software tools., • Experience with high-speed/hypersonic aerospace test systems and/or vehicle development programs., • Background in early-stage R&D, product development methodologies, and innovation strategy., • Previous involvement in business integration efforts such as planning, analysis, or M&A activities.

Job DescriptionSUMMARY: Obtains the best quality, service, and value for products and services through effective bidding, negotiation, and supplier management. Identifies manufacturing needs, identifies, and selects suppliers, initiates purchase orders, and arranges for delivery. Provides parts, equipment, services, and materials of limited scope and complexity. ESSENTIAL FUNCTIONS: • Identifies and recommends suppliers by investigating potential suppliers, researching parts, equipment, machinery, services, and materials availability., • Conducts supplier site visits and evaluates them as to production capability, performance, delivery, and other key business criteria. May complete supplier certification as part of a technical and/or quality team., • Purchases parts, equipment, and materials by preparing request for quotations and submitting purchase orders with approved suppliers. Issues purchase orders and agreements that accurately reflect price, schedule, terms, and conditions as negotiated with suppliers. Maintains accurate lead times for assigned commodities., • Evaluates bids for standard and non-standard items. Selects suppliers for lower cost items or items of limited scope and complexity and negotiates price, delivery, quality, and service. Develops alternate sources of supply by identifying and researching prospective suppliers., • Monitors and evaluates supplier performance. Advises appropriate personnel of impending supplier failure to fulfill contractual agreements that may delay production or delivery. Resolves shipment quality discrepancies by mediating supplier/manufacturing issues. Facilitates the resolution of issues by arranging and participating in conferences between suppliers and company personnel., • Negotiates and settles damage claims, rejections, losses, return of materials, over-shipments, cancellations, and engineering changes with suppliers., • Provides parts, equipment, and materials information by answering questions and requests. Prepares reports by collecting, analyzing, and summarizing information and trends., • Participates in continuous improvement activities and provides suggestions for cost reduction and improved efficiency., • Maintains professional and technical knowledge by attending educational workshops, reviewing trade publications, establishing networks, and/or participating in professional associations., • Complies with federal, state, and aerospace industry regulations; ensures adherence to requirements and advises management on needed actions. Complies with Government/Commercial Practices Manual (GPM/CPM) policies and procedures., • Contributes to team effort by accomplishing related results as needed. Work assignments may include cross-functional or project team responsibilities (e.g. continuous improvement). QUALIFICATIONS: • Knowledge of key purchasing and negotiating methods, principles and concepts and general business operations., • General knowledge of legal and regulatory requirements related to procurement., • Basic understanding of continuous improvement techniques and methods., • Ability to use standard business application software and specialized purchasing and/or materials systems (e.g. electronic data interface (EDI) or manufacturing resource planning (MRP) systems)., • Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, and percentages., • Ability to research and analyze data and develop recommendations or resolve issues. EDUCATION: • Bachelor's degree (BA) in Business Administration or related field which has provided both theoretical and practical knowledge in the field. Professional entry level position., • May have limited prior industry experience or worked with direction in student internship programs., • Certificate in Purchasing Management (CPM) preferred.

Job Description LHH Recruitment Solutions has an opening for an Account and Sales Manager for our client in the Bohemia, NY area. This direct hire role allows you to expand your account management career within a state-of-the-art technology organization. This on-site position requires a minimum of five-years current experience, a bachelor’s degree in electrical or electro-mechanical engineering as well as experience in conducting technical presentations, trade shows and experience in a OEM environment. Successful candidates will have several years within the aerospace/aeronautics/defense/security fields. Salary range: $75,000.00 - $100,000 plus commission structure RESPONSIBILITIES: • Identify and pursue new business opportunities by conducting market research., • Analyzing market surveys and attend related tradeshows, exhibitions, and conferences., • Generate sales leads, set client appointment, prepare, deliver, and explain quotes, traveling to customer negotiations and closing orders, and assisting with product shipment as needed., • Maintain relationship with OEM customers by making visits and phone calls., • Schedule and conduct technical presentations for current and new customers., • Develop and execute sales plans to achieve objectives – KPIs, revenue, profitability, and market share., • Achieve annual booking plan on a quarterly basis., • Observe and maintain a real time sales forecast, sales database and reporting results., • Collaborate with cross-disciplinary engineering team and operations department., • Able and willing to travel to customer sites or other company locations worldwide (approximately 20%) REQUIREMENTS: • REQUIRED - Bachelor’s Degree in electrical or electro-mechanical discipline., • Experience in a OEM environment., • Willingness to learn and be hands on in a technical environment., • Proven well established verbal and written communication skills., • Highly proficient in Microsoft Office Suite of Tools., • Strong analytical, problem-solving skills and time management., • Ability to operate independently with minimal guidance by management., • Demonstrated proven history of successful sales management and quota achievement., • Willingness and ability to travel domestically and internationally., • Ability to read schematics highly preferred., • Superior proven technical presentation skills. Health insurance, dental insurance, life insurance and several other benefits are offered with this full time direct hire role. Pay Details: $115,000.00 to $120,000.00 per year Search managed by: Laura Orozco Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description CNC Programmer The CNC programmer works within the Engineering Department to create and evaluate existing CNC programs for vertical and horizontal lathes, and multi-axis milling machines. Specific Responsibilities: • Ability to create and evaluate and improve existing CNC programs for vertical and horizontal lathes, and multi-axis (4-5 axis) milling machines., • Solid understanding of feeds and speeds for aerospace materials., • Be a team player for all lean activities continuous improvement projects., • Tool selection and process layout on a consistent basis, working with customers to ensure work can be accomplished., • Create shop floor documentation including operation sheets and work instructions, • Must be accustomed to deadlines and accountability, • Experience with complex aerospace parts including milling and turning processes, • Unigraphics NX experience, • Lean manufacturing techniques, • Effective time management skills including multi-tasking, • Ability to read blueprints. Speak and write reports in English., • High attention to detail., • Develop and follow procedures. Benefits: Medical, RX, Hospitalization - 100% Employer paid (Single through Family coverage) Dental - 100% Employer paid (Single through Family coverage) Vision Life Insurance - 100% Employer paid Long Term Disability - 100% Employer paid Paid Time Off, Sick Time, Holidays 401k FSA AFLAC Air Industries Group is an Equal Opportunity Employer Minority / Women / Disability / Veteran / Gender Identity / Sexual Orientation / Age. Job Posted by ApplicantPro Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

Job Description • Perform mechanical inspection of product according to documented processes. Includes physical inspection and paperwork inspection to verify conformance to requirements., • Communicate inspection failures, deviations, and non-conformances to Director of QA, • Perform inspections for all incoming and outgoing material, • Follow written instructions provided in company procedures and specifications, • Review batch records and ensure compliance to the associated procedure, documentation, specs, etc., • Perform mechanical inspection of product according to documented processes. Includes physical inspection and paperwork inspection to verify conformance to requirements (i.e. correct process performed, paint thickness is acceptable per customer requirements, temper verification by processor proves acceptable, etc.)., • Able to interpret engineering drawings, specifications, purchase orders, statement of work and standards to determine quality status., • Accurately document and maintain associated paperwork and inspection results in a consistent and timely fashion., • Identify/communicate continuous improvement opportunities for the quality program., • Accurately complete all required documentation, • Perform inspections for all incoming and outgoing material, • Perform measurement and final visual inspection Qualifications: • 3 - 5 years experience in Final and In-Process inspection of aircraft detail parts and structural assemblies- a plus, • Associates degree or equivalent education and work experience, • Knowledge of calibration of inspection tools - Will Train, • Knowledge of measuring tools and proficient in reading blueprints a plus Job Posted by ApplicantPro Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

Job Description Location: Oakdale, NYSalary: $80,000 – $100,000 per year (based on experience)Industry: Aerospace ManufacturingEmployment Type: Full-Time Position Overview We are seeking a highly skilled and detail-oriented Quality Engineer with 3+ years of experience to join our aerospace manufacturing team in Oakdale. This role is essential to ensuring product quality, regulatory compliance, and continuous improvement across our operations. Key Responsibilities • Develop and implement quality assurance procedures and standards., • Conduct root cause analysis and corrective/preventive actions (CAPA)., • Perform internal audits and support external audits (AS9100, ISO 9001)., • Collaborate with engineering and production teams to resolve quality issues., • Analyze data and generate reports to monitor quality performance., • Support supplier quality initiatives and incoming inspection processes., • Maintain documentation and ensure compliance with aerospace industry standards.Qualifications, • Bachelor’s degree in Engineering or related field., • Minimum of 3 years of experience in quality engineering within aerospace manufacturing., • Strong understanding of AS9100 and ISO 9001 standards., • Proficiency in quality tools such as FMEA, SPC, and Six Sigma methodologies., • Excellent analytical, communication, and problem-solving skills.Benefits, • Medical Insurance – Comprehensive coverage for employees and dependents., • Dental & Vision Insurance – Affordable plans with wide provider networks., • 401(k) Retirement Plan – Includes company matching contributions., • Paid Time Off (PTO) and company holidays., • Professional development and training opportunities. Pay Details: $80,000.00 to $100,000.00 per year Search managed by: Andrew Khanija Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Job Summary The Design Engineer 3 provides engineering support on systems, system elements, interfacing systems, components, devices and/or processes. Possesses broad knowledge of industry practices, standards, and technology areas. Works as either technical or programmatic lead of a team and assists with solving complex problems in an engineering discipline. Develops strategic and implementation plans. Essential Functions • Works on multiple highly complex major projects requiring innovative, original solutions, • May plan multiple projects simultaneously. Estimates, tracks & completes project on time and within budget., • Subject Matter Expert in at least one area or system., • Strong technical, proposal and report writing skills with ability to collect or generate all necessary backup material., • Exercises considerable latitude and technical judgment in deciding work methods., • Can lead a group of engineers and technicians, responsible for budget and manpower estimates., • Develops innovative solutions to unique problems., • Works mostly independently with minimal supervision., • Exercises substantial initiative/ judgment in work methods and in interpreting goals., • Able to give effective presentations to critical/high level customers., • Knowledgeable in all technical areas of the group's scope or having a demonstrated ability to achieve that level of proficiency in a short period of time., • Responsible for large and fairly complex projects., • Ability to work well with and mentor both high and low performers in a team or group environment, setting expectations, and providing input and feedback in a helpful way that fosters accountability. Ability to deal with personnel problems in a constructive manner., • Proven leadership skills. Identifies problems and actively devises appropriate solutions., • U.S. Citizenship Required., • BSME or equivalent educational degree required., • Minimum six (6) years or demonstrated capability in an Engineering role, experience within a manufacturing environment and aerospace industry preferred., • Strong knowledge of AS9100 and ISO requirements., • Ability to read, write, and speak in English proficiently., • Strong work ethic; can work independently or in a group., • Highly professional with excellent telephone etiquette., • Medical Dental, Vision,, • Life Insurance, Long-Term Disability, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD), • PTO (3 weeks accrued first year!), • 10 Paid Holidays, • Flexible Spending Accounts, • 401(k) with matching, • Pet Insurance Reports To: Engineering Manager FLSA Classification: Exempt Job Type: Full time EOE/Disability/Veteran EAST/WEST INDUSTRIES INC. is a woman-owned small business located in Ronkonkoma, NY. We are a world leader in the development and production of aircraft seats and life support systems for high-performance military aircraft, and ground support equipment for servicing such aircraft. Job Posted by ApplicantPro

Job Description Design Engineer Bohemia, NY • US Citizenship is required for this role * If you're ready for the challenge of working for a dynamic organization, Dayton T. Brown, Inc. has a career opportunity available for a hands-on Design Engineer to join our growing Engineering and Test Division. Our three divisions, Engineering and Test, Technical Services, and Mission Systems, make DTB a diverse and interesting place to work. Dayton T. Brown, Inc. is a premier leader as an independent testing laboratory providing testing and engineering services. We support customers across all platforms and services in the military, aerospace, shipboard, railway, weapons manufacturers, automotive and consumer industries worldwide. The ideal candidate will be able to hit the ground running, must take a hands-on approach to their work, be flexible in their duties, and be a proven self-starter. Responsibilities include, but are not limited to: • Design custom structural test fixtures that meet customer statement of work requirements, • Create fixture concepts based on requirements, • Develop a design from concept through completion based on discussions with the internal engineering team and end user/customer, • Interfaces with customers and the engineering team to translate design needs, • Participate in and conduct initial and ongoing design reviews, • Select appropriate structural material based on engineering analysis, • Use Autodesk Inventor to create drawings of machined parts, weldments, schematics and top and sub-assemblies, • Create drawings to commercial standards that can be used for fabrication and assembly, • Prepare bills of materials that include fabricated parts, standard hardware, and applicable test instrumentation, • Apply tolerances to ensure parts are produced with the desired fit, • Demonstrate a basic understanding of data acquisition systems and hydraulic/pneumatic control systems., • Familiarity with various fabrication methods, • Prepare fabrication plan and fixture assembly procedures, • Act as the technical contact for the fabricators and assemblers during the production phase of projects, • Supporting quoting efforts for Design/Fabrication as needed, • Collaborate with Project Managers to status ongoing projects, • Provide project engineering support during all aspects of the test program, • Manage test programs. Some of the areas of testing include structural testing, armament, pressure, and windblast., • Coordinate required resources and schedule required to conduct testing, • Interface with customers, • Write test procedures and test reports, • Travel as required within the continental US, • Overtime will be required during certain periods of a project Required Qualifications: • BSME or comparable, • 4+ years' experience working as a Design Engineer, • Currently hold an FE certification and eligible to go for a PE, • A PE licensure will eventually be required, • Strong proficiency using Autodesk Inventor/ Assembly handling or equivalent software, • Experience in mechanical CAD design (Autodesk Inventor), ability to perform simple design hand calculations, fixture design, and especially fixture design for testing products, • Knowledge of FEM/Analysis, • Must be a US Citizen and able to pass a drug test and background check, • Expertise in defense, aerospace, telecom, commercial, and/or automotive product qualification requirements, • Ability to read and interpret test specifications, • Must be computer literate, including MS Office, • Must be able to work in a fast-paced work environment, • Ability to work without supervision and to provide technical consultation and guidance, • Experience managing labor and resource schedules, • Strong communication skills, both written and verbal, • Demonstrated technical innovation/guidance, project management, and problem solving, • Experience in using FEM software like ANSYS is a plus but not required, • Experience with CNC machining beneficial but not required Dayton T. Brown, Inc. offers: • Competitive salaries, • Tuition Reimbursement at up to 100%, • Medical/Dental/Vision/FSA, • 401k with company matching, • Paid time off, • Group life insurance, • Employee activities, • A family-friendly work culture Job Posted by ApplicantPro

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. The pay range for this position is between $120,000 and $170,000 annually, and we will rely on previous experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: This individual will play a pivotal role in driving test engineering and process improvements, optimizing designs, and supporting production operations, directing a team of engineers and technicians. This role requires a combination of leadership, technical expertise, and hands-on experience in test and process engineering within a high-reliability electronics manufacturing environment. Key Position Accountabilities: • Provides technical leadership to address challenges and introduce new capabilities to DDC’s Manufacturing and Test Engineering., • Oversees the design and development of test fixtures and software, ensuring the creation of innovative and reliable test systems., • Lead efforts to research and implement new testing methods, equipment, and techniques to enhance product testing capabilities., • Supervises, mentors, and develops a cross functional team of engineers and technicians, fostering a culture of continuous learning, growth and high performance., • Participates in the development of new products and supports the timely fabrication and testing of designs., • Leads the creation of new processes and procedures, contributing to teams of varied technical disciplines, and ensuring efficient process documentation (SOPs, travelers, etc.)., • Collaborate with design teams to develop innovative approaches that optimize product design trade-offs, including cost, performance, and time to market., • Provides leadership and oversight to day-to-day Process Engineering support across the company (Engineering, Product Development, Test Engineering, Procurement, Manufacturing, and Product Assurance), focusing on improving processes and resolving production issues., • Lead failure analysis investigations of in-house and customer-returned products. Collaborate with other engineering teams to make data-driven recommendations that improve product quality and reduce the likelihood of failures., • Manages the development and execution of project plans, including resource allocation and schedule oversight, ensuring the timely and successful introduction of new processes and test technologies in alignment with company objectives., • Propose and champion the implementation of new methods, capital equipment, technologies, and processes to enhance product performance and operational efficiency., • Participate in technical meetings with standards organizations, ensuring alignment with DDC’s strategic goals., • Coordinate testing, perform failure analysis, and support Applications Engineering in resolving product-related issues at customer sites., • Lead vendor selection for major design projects, considering technical performance, risk, and cost., • Education: Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or Applied Sciences required; Graduate degree and previous leadership training is desirable., • Experience: 7+ years of relevant engineering experience, with a focus on test or process engineering and manufacturing support; and 2+ years’ experience as a supervisor, lead engineer or senior engineer., • Technical Skills:, • Knowledge of MIL STDs 883, MIL-PRF 38534, 38510, IPC 610 (desirable)., • Proven expertise in designing, optimizing, and implementing test systems, fixtures, and software., • Strong knowledge of test equipment, failure analysis techniques, and process improvement strategies, • Familiarity with all aspect of Electronics manufacturing including Hybrid and PCB manufacturing., • Leadership Skills: Demonstrated ability to lead teams, mentor engineers, and manage complex engineering projects., • Communication: Strong written and verbal communication skills, with the ability to present technical information to a wide range of audiences., • Additional Skills:, • Knowledge of industry best practices and continuous improvement methodologies. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description Location: Hauppauge, NY Job Type: Full-Time About Narda-MITEQ Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ is a trusted name in RF, microwave, and fiber optic technologies, known for delivering high-performance components and subsystems used in mission-critical applications. For more than 70 years, we’ve supported customers across defense, aerospace, space, communications, and industrial markets with both custom-engineered and off-the-shelf solutions. Our commitment to quality, innovation, and technical excellence continues to drive our success. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all essential functions, duties and skills required of personnel in this position. Management retains the discretion to add or change the duties at any time. Position Overview We’re seeking a dynamic and experienced Director of Sales & Marketing to lead Narda-MITEQ’s overall sales and marketing efforts across the Narda-MITEQ product portfolio. As a key member of the leadership team, this high-impact role is responsible for driving profitable growth through strategic sales execution, integrated marketing initiatives, and strong customer engagement. The Director will oversee the full sales and marketing team and work closely with engineering, operations, and executive leadership to align business goals, shape product direction, and strengthen our market position. The ideal candidate brings deep expertise in the RF/microwave and defense sectors, a proven ability to build and scale high-performing sales pipelines, and the strategic mindset to convert complex technologies into clear, compelling value for our customers. Key Responsibilities Sales Leadership • Lead sales functions, including regional sales, inside sales, key account development, and channel partner support, • Develop and execute strategic sales plans that meet or exceed revenue and profitability targets, • Key contributor to strategic planning efforts, by bringing forward market trends, customer feedback, and competitive insights to help shape direction and priorities, • Build and maintain relationships with key customers, including OEMs, system integrators, and government contractors, • Manage sales forecasts and pipeline health using customer relationship tools and analytics, • Prepare and present monthly sales reports to the executive team, highlighting performance metrics and areas for improvement., • Work cross-functionally with engineering and operations to support quoting, delivery, and technical execution, • Oversee brand positioning, trade shows, sales enablement, and all marketing efforts, • Collaborate with product line leaders and executives to identify growth areas and prioritize market opportunities, • Develop and implement marketing strategies to support business growth, • Provide mentorship and guidance to the Sales & Marketing team, promoting professional development and performance excellence, • Create a culture of accountability, customer focus, and collaboration, • Bachelor’s degree in engineering, business, or a related field (MBA or technical graduate degree a plus), • At least 15 years of progressive leadership experience in sales, marketing, or business development within the RF/microwave, defense, or aerospace industries, • Proven leadership and management skills with Demonstrated success in achieving sales targets and driving revenue growth., • Experience in managing and growing sales channels including Distribution, Direct Sales, and Sales Reps., • Strong knowledge of U.S. defense procurement and government contracting, • Strategic thinker with the ability to execute in fast-paced, technical environments, • Excellent communication and presentation skills, • Strong analytical and financial skills, including proficiency in financial modeling and data-driven decision-making, • Experience with CRM platforms and marketing tools, • Must be a U.S. Person and be able to provide proof of status; ability to obtain a security clearance is a plus Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to providing a workplace that ensures all employees and applicants are treated with respect and dignity. Narda-MITEQ maintains a workplace free from unlawful discrimination and we ensure that all qualified applicants receive equal consideration for employment. Narda-MITEQ is a drug-free workplace and may conduct pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at . Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Aerospace Composite Technician GSE Dynamics, Inc., a full-service engineering and manufacturing company located in Hauppauge, NY is seeking an experienced Aerospace Composite Technician Responsibilities include: \n • Mold preparation and repair including the application of mold releases \n, • Mixing and application of adhesives sealants and potting compounds \n, • Trim and machine core materials \n, • Layout and trim of finished parts \n, • Install and leak test of vacuum bag assemblies \n, • Setup oven and autoclave for cure cycles in accordance with instructions \n, • Basic machining of tooling and detail parts \n, • Finishing and application of paints to finished parts (details and assemblies) \n, • Perform vacuum bagging and related processes for fabrication and curing composite parts \n, • Perform structural bonding operations using film adhesives, core materials, and foaming adhesives. \n, • Utilize clean room process to maintain the integrity of new parts. \n, • Document materials utilized in creating parts for traceability purposes. \n\n Qualifications: \n • General knowledge of practices and procedures used to fabricate composite and metal bonded structures. \n, • Ability to work with limited supervision \n, • Ability to read and correctly interpret blueprints and schematics is a must. \n, • Ability to use precision instruments such as calipers and micrometers in order to trim or drill parts. \n, • Ability to calculate proper proportions of resins and catalysts as required by specifications. \n, • Ability to lift heavy materials up to 50 lbs. \n\n Requirements: \n • U.S. Citizen. \n, • High School Diploma or GED equivalent. \n, • Minimum 1 year experience in laminating and/or fabricating. \n\n Salary Range: $20.00 per hour - $25.00 per hour Job Type: Full-time FLSA Classification: Non-exempt Benefits include: Paid Time Off, Medical Insurance, Dental Benefit, Life Insurance, 401k with company match. EOE AA M/F/Vet/Disability Please Contact: [email protected]

Principal Manufacturing Engineer \n\n BUSINESS: Aerospace & Defense \n\n\n\n We are seeking a Principal Manufacturing Engineer to join our Hauppauge team. This role will act under the general supervision of the Manufacturing Engineering Manager on multiple assignments of complex nature and broad scope. Signification dotted line relationship will exist with Design Engineering Management. \n \n As a Principal Manufacturing Engineer, the candidate will be a part of a dynamic team to design and develop manufacturing processes for new and legacy product lines. This includes but is not limited to process improvements, tooling, test fixturing, manufacturing instructions, capital planning/specification/selection/approval, TAKT time optimization, direct labor forecasting, labor content reduction, problem-solving, and next-generation concept development and demonstration. \n \n The Principal Manufacturing Engineer will closely work with program management as well other site and group functions regarding manpower, cost, and scheduling needs. The position will also provide marketing and sales support as required, including leading proposals and customer presentations. \n \n You Will: \n\n • Contribute to NPI at the earliest stages of pursuit to forecast technology fit, readiness level, prototype and production investment requirements, labor content, facility layout and manufacturing NRE – critical to ensuring accuracy and competitiveness of new business proposals and new business wins.\n, • Influence direction and drive implementation and extension of additive manufacturing strategy for both NPI and production\n, • Continually improve manufacturing methods/systems and process/ product improvements to optimize product performance and reduce manufacturing costs. Identify, design, implement, and evaluate improvement opportunities.\n, • Determine specific requirements of manufacturing operation to specify equipment, fixture, and process parameters.\n, • Collaborate on design with Engineering, Supply Chain, and supply base to introduce best cost product/process combinations for NPI.\n, • Provides production floor and assembly support in technical matters relating to assembly drawing interpretation, engineering change notices, rework, manufacturing difficulties, and specifications.\n, • Compiles and evaluates test and production data, prepares technical analysis, and recommends manufacturing methods and processes required to meet design objectives on new or improved products and/or processes.\n, • Provides support in the development, modification, and evaluation of manufacturing operations.\n, • Provides input to plans, process specifications and procedures, production aids and assembly fixtures, factory work standards development, and the like.\n, • Ensures successful completion of the assigned tasks within the budgeted time and cost constraints.\n, • Ensures that the quality policy and quality system is understood, implemented, and maintained at all levels of the organization.\n, • Develop plans to evaluate process repeatability and stability through equipment qualification and process validation.\n, • Applies six sigma methodologies as appropriate.\n, • Performs other related duties as required.\n, • Support formal reviews with suppliers, customers, and other functions within the organization\n, • Report on projects and initiatives progress as required\n, • Communicate effectively with all layers of the organization as required\n, • Provide technical leadership and supports growth initiatives execution\n, • Other duties as assigned\n\n \n You Have: \n Knowledge, Skills & Abilities \n\n • A minimum of 10 years of relevant experience in the development, installation, testing, analysis, certification, and design of aerospace components is preferred.\n, • Experience in designing/analyzing components, assemblies, and tooling with high precision tolerances.\n, • Working knowledge of Mechanical and Electromechanical assemblies.\n, • Direct experience working with A&D product line.\n, • Experience in technical writing (work instructions, reports, etc.) with attention to detail for formatting, consistency, and thoroughness.\n, • Proficiency in 3D CAD modeling, assemblies, and drawings (SolidWorks / Autodesk Inventor).\n, • Proficiency in MS Excel (formulas, lookup functions, etc.)\n, • Ability to read, analyze, and interpret reference manuals, engineering standards, and vendor component catalogues.\n, • Excellent written and verbal communication skills.\n, • Positive attitude and ability to collaborate with all operational disciplines.\n, • Knowledgeable in lean manufacturing principles and six sigma methodologies.\n, • Electric Motor and Pneumatic/Hydraulic Valve assembly and test experience.\n, • Knowledge of visual programming languages a plus (LabVIEW, Simulink, etc.)\n, • Knowledge of Electromechanical components and PLC troubleshooting\n, • Previous experience with aviation or medical equipment qualification processes is desirable.\n, • Six Sigma Green Belt, Black Belt, or Lean certification a plus\n, • Experience in project management\n, • Proficient in financial and statistical analysis\n, • Solid analytical skills and solution-driven thinking; collects and researches data; uses intuition and experience to complement data. Make good decisions based upon a mixture of analysis, wisdom, experience, and judgment.\n, • Strong project management skills, including the ability to prioritize, balance, and manage multiple efforts with strong results/goal orientation.\n, • Experience leading others\n, • Proficiency with fluid and stress analysis tools (i.e. Ansys) considered a plus\n, • Program management experience is desirable\n, • Identifies and resolves problems in a timely manner; develops alternative solutions; works well in a group problem-solving situation; presents ideas and information in a manner that gets others' attention; displays willingness to make decisions; exhibits sound and accurate judgment; supports and explains reasoning for decisions includes appropriate people in the decision-making process.\n, • Displays original thinking and creativity; Meets challenges with resourcefulness; Generates suggestions for improving work.\n, • Learns quickly when facing new problems; a relentless and versatile learner; open to change; striving for continuous improvement of self and processes.\n, • Excellent communication (oral and written) and interpersonal skills with the ability to convey information and ideas in a variety of media, tactful, confident, at all levels, internal and external.\n, • Bachelor of Science or equivalent in Mechanical, Aerospace, or Electrical Engineering from an accredited college or university required and 10+ years of related experience. related disciplines will be considered based on the type of experience of the candidate.

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. Pay range for this position is between $130,000 and $170,000 annually and will depend upon experience. This position is 100% onsite at our Bohemia, NY office. This position requires a U.S Person or a person who can qualify for a department of state or commercial license. Position Summary: We are seeking a skilled and detail-oriented IC Package Designer to join our engineering team. The ideal candidate will have in-depth knowledge of substrate design, package layout, signal integrity, and manufacturing constraints. This role will collaborate cross-functionality with the electrical, mechanical and manufacturing design teams to develop reliable, manufacturable, and cost-effective package design. • Design and Development: Lead the interconnect design for advanced electronic packaging solutions, including high-reliability flip-chip BGA, ceramic packages, multi-chip modules (MCMs), and system-in-package (SiP) architectures., • Verification and Validation: Perform comprehensive design verification ensuring that the package design meets all functional, electrical, thermal, mechanical, and manufacturability requirements, • Collaboration: Collaborate closely with substrate, material and package suppliers to align design with process capabilities and technologies to ensure design meets electrical and mechanical performance requirements., • Troubleshooting: Support Failure Analysis (FA) and root cause investigations related to the design, assembly, or performance of a package or substrate., • Optimization: Define and develop substrate stack-ups, routing strategies, via structures, and component placement to meet electrical and mechanical specifications., • Documentation: Maintain thorough documentation of design processes, test results, and revisions to ensure clarity and consistency for release packages for manufacturing., • Planning: Develop plans, schedules, and support technical reviews that are required to develop products from market requirement through product release., • Mentorship: Provide guidance and support to junior engineers, sharing expertise and best practices in package design and development., • Education: Bachelor’s degree in Electrical Engineering, Material science or related field., • Experience: 8+ years of experience in IC package design and development, • Tool Skills: Experience with package design tools from concept through release (e.g., Cadence Allegro package designer)., • Technical Skills: Proven experience with advanced packaging technologies (e.g., 2.5D/3D, redistribution layer, interposers, HBM integration, Package-in-Package, Fan-Out Wafer Level Packaging, wire bonded, Flip Chip, stacked die using DAF or FOW, Chip-on-Wafer-on-Substrate, Ceramic Co-Fire, Printed Substrate in ceramic package, plastic encapsulated modules/BGAs)., • Knowledge: Strong understanding of substrate technologies (e.g., BT laminate, ABF, BeO, PTFE, KPPE, glass cloth resin), materials and manufacturing processes., • Problem-Solving: Excellent analytical and troubleshooting skills with a keen eye for detail., • Experience collaborating with OSATs and semiconductor foundries, including qualification and design feedback loops, • Knowledge of high-speed digital interfaces (PCIe, DDR, SerDes, etc.)., • Knowledge with package-level simulation tools to analyze signal quality and timing through package interconnects.

Job Description Strategic Business Development Professional Aerospace | Defense | High-Tech REMOTE - US-Based About Dayton T. Brown, Inc.: Join Dayton T. Brown, Inc., a proud leader serving both military and commercial markets with comprehensive Engineering and Testing services, Technical Publications, and cutting-edge Mission Systems. With our national workforce spanning 31 states and our headquarters in Bohemia, NY, we are experiencing significant growth. Our commitment to delivering the highest quality solutions to world-class clients is fueled by our dedication to attracting top talent and fostering professional development. • Engineering and Test Division: Leveraging cutting-edge equipment and technologies, we conduct critical environmental, dynamic, airframe qualification, and life extension structural testing tailored to the exacting standards of the Aerospace, Defense, and High-Tech Industries., • Mission Systems Division: We specialize in the development and deployment of mobile Sensitive Compartmented Information Facilities (SCIFs) for the U.S. Navy., • Technical Services Division: We provide comprehensive technical documentation and logistics support services for leading Aerospace, Defense, and High-Tech Original Equipment Manufacturers (OEMs) and Tier 1 Suppliers. This unique portfolio of services, combined with your established industry relationships, creates a powerful synergy to deliver exceptional value and solve complex challenges for our clients. In a dynamic market, Dayton T. Brown, Inc. is experiencing significant growth and seeks accomplished sales professionals who are driven to excel and advance their careers. To consistently deliver the highest quality solutions to our clients, we search for the best talent and nurture their professional growth while working on exciting, interesting projects. We are looking for a Business Development Professional with proven experience and a passion for selling services and solutions to join our team and help spearhead our growth. You will play a critical and active role in the day-to-day sales activities and operations. You must have an entrepreneurial spirit and be comfortable working in a structured sales process environment. Successful candidates will have a can-do, what it takes attitude to sales. What You'll Do: This strategic business development role is designed for a highly motivated and results-oriented sales leader. The successful candidate will possess a proven ability to identify, cultivate, and close new business opportunities within the Aerospace, Defense, and High-Tech sectors. Key responsibilities include: • Developing and executing strategic sales plans to achieve revenue targets., • Cultivating and maintaining strong relationships with Aerospace and Defense OEMs, Tier 1 and Tier 2 suppliers, commercial aviation clients, and other relevant industry stakeholders., • Identifying and qualifying new business opportunities through proactive market research and networking., • Leading the development and presentation of compelling proposals and presentations., • Negotiating and closing complex contracts. Key Responsibilities: • Market Expansion:Identify and pursue business opportunities with aerospace, defense, and commercial clients., • Client Engagement:Develop and maintain strong relationships with key decision-makers, including government agencies and contractors., • Sales Strategy:Create and execute strategic sales plans to capture new opportunities and drive long-term growth., • Solution-Based Selling:Understand client needs and position DTB's services as solutions to their challenges., • Proposal Leadership:Lead proposal development efforts, ensuring high-quality submissions that align with client requirements., • Cross-Functional Collaboration:Work closely with internal teams, including engineering, program management, and operations, to deliver on commitments and exceed client expectations. What We're Looking For The right candidate will bring: • Industry Expertise:Strong understanding of the aerospace and defense sectors, including procurement processes, government contract vehicles, and subcontracting., • Proven Track Record:Demonstrated success in hunting, developing, and closing high-value contracts., • Quota driven - someone who has been in a true sales role with an established sales quota, • Technical Acumen:Ability to engage with engineers, understand complex technical concepts, and communicate solutions effectively., • Relationship-Driven Mindset:Established network within the industry, with the ability to build and sustain long-term partnerships., • Strategic Thinking:Ability to anticipate industry trends, navigate complex sales cycles, and develop winning strategies., • Resilience & Persistence:Comfortable with long sales cycles and committed to driving deals to completion., • Excellent Communication Skills:Capable of engaging effectively with stakeholders at all levels, from engineers to C-suite executives., • Proposal Development Experience:Skilled in crafting compelling proposals and leading teams to secure competitive bids., • Collaboration & Teamwork:Works seamlessly with internal teams to align business development efforts with company capabilities. Preferred Qualifications: • Engineering, MBA, or Advanced Degree(preferred but not required), • Proficiency in Microsoft Word & Excel, • Experienced with Salesforce or alternative CRM, • Experience with Industry Organizations & Networking Events This is a high-impact role where you will be expected to contribute quickly, drive meaningful revenue growth, and help shape the future of DTB's business development efforts. Compensation will be Base- At Plan. . What You'll Experience at Dayton T. Brown, Inc.: • A dynamic and innovative work environment with a strong emphasis on teamwork., • Opportunities for professional growth and development., • Excellent compensation and comprehensive benefits package., • A vibrant company culture with fun employee events, including golf, volleyball, pickleball, and running. Dayton T. Brown, Inc. is an equal opportunity employer- Veterans and Disabled. Job Posted by ApplicantPro

With over five decades of innovation in power supply solutions, we offer a dynamic environment where engineering excellence, sustainability, and customer success drive everything we do. Bachelor’s degree in Electrical Engineering or a related field.

Assistant Project Manager Job Summary.We are seeking a dedicated, organized, and efficient assistant project manager to join our team.In this role, you will work with the project manager to coordinate and accomplish the necessary project tasks and requirements.Candidate must have an eye for detail a

Bachelor’s degree in Construction Management, Civil Engineering, Architecture, or a related field.

The ideal candidate will be responsible for full cycle Project Management within a construction environment.Responsibilities will include defining project scope, planning, budgeting, resource allocation, conducting project status meetings and communicating updates to all stakeholders.Ability to work

Bachelor's degree in Civil Engineering or a Construction Related Degree.

A growing civil construction and site development firm is seeking a hands-on Senior Project Manager to lead complex land development and municipal infrastructure projects.The ideal candidate has 10+ years of field-driven experience, with a background in sitework and utility-heavy scopes.This is a fu

Bachelor’s degree in Mechanical Engineering, Civil Engineering, Construction Management, or a related field;. Must exhibit proficiency in basic engineering computations and analysis;. Must possess the ability to read, understand and interpret engineering drawings;.

The SPM will provide regular reporting and data analytics to the head of Engineering, Design, and Construction. Builds tracking and reporting platforms that integrates into the ED&C project financial and engineering controls system. Bachelor’s degree in Architecture, Engineering, or Construction M

Qualifications: Bachelor's in Electrical Engineering, Materials Science, or related field.

Construction Management company seeking an experienced Project Manager to join its rapidly growing 50-year-old company.This Project Manager must plan and supervise a wide range of construction projects from start to finish by organizing and overseeing construction procedures to ensure they are compl

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. This role offers the chance to combine your civil engineering expertise with meaningful projects that enhance p

Bachelors degree in Construction Management, Civil Engineering, Architecture, or a related field.

Construction Management company seeking an experienced Project Manager to join its rapidly growing 50-year-old company.This Project Manager must plan and supervise a wide range of construction projects from start to finish by organizing and overseeing construction procedures to ensure they are compl

Bachelors degree in Mechanical Engineering, Civil Engineering, Construction Management, or a related field;. Must exhibit proficiency in basic engineering computations and analysis;. Must possess the ability to read, understand and interpret engineering drawings;.