Aerospace engineering jobs in Hoboken, New JerseyCreate job alerts

Job Description The Source Inspector, (SI) is responsible for performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection. The source inspection may include reviewing all paperwork relating to the product at hand. This includes operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly. The SI will also verify FAI’s to AS9102 for accuracy and completeness. The SI must be familiar with hand tools and gaging techniques. The SI will also be fluent in B/P interpretation and GD&T. Source Inspection will occur at end customer’s suppliers’ location. The SI will travel to these locations. Job Responsibilities: • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • Knowledge of CMM Inspection process, • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • Reads, interprets, and utilizes Quality policies, procedures, blueprints, and other documentation, • Process warehouse materials, • Rely on instructions and pre-established guidelines/procedures to perform the functions of the job, • Support positive corrective actions and identification of root cause, • Other duties as assigned.Required Skills, • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • MS Outlook, and EXCEL experience, • Experience with hand measurement gages, conduct conventional inspection to engineering requirements, • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Valid drivers license and auto insurance required.Additional Desired Skills:, • Prior practical experience and implementation of Quality inspection tools and equipment., • Experience in RCCA, and problem solvingGeneral Requirements, • Ability to handle complex situations and solve complex problems, • Ability to work effectively under pressure to meet deadlines, • Ability to press and analyze technical and business information, • Ability to work in a team environment with strong communication skills (verbal and written), ability to interact via telephone, email with co-workers, • Ability to remain seated for up to 5 hours at a time, • Fluent English – reading and writing is required, • Professionalism, integrity, and exceptional attention to detail, • Strong independent decision-making skills; excellent analytical skills and professional judgment, • Excellent interpersonal, written, and verbal communication skills, • Must be able to simultaneously manage several objectives, • Must be detail oriented, organized, and self-motivatedAdditional Qualifications (Preferred):, • 3+ years’ experience as a quality inspector or technician., • 3+ years’ experience in an aerospace manufacturing facility, • 3+ years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation, • Proficient with Microsoft Office products, • Effective communication skills, • Detail oriented, • Any combination of education and experience may be considered, • The General Vision Acuity Test shall be performed by an Oculist, Optometrist, or other professionally recognized person. The following requirements shall apply. • Near Vision – Eyes meets Orthorater 8 (95% or Jaeger #2 at 12 inches), • Far vision – Eyes meets Orthorater 4 (76%) or Snellen Chart 20/50, • Color Perception – 6 of 9 Orthorater plates US or International citizenship or permanent residence status required depending on work location. • Valid Driver’s License, • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement (.70/mile 2025) when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • Overnight trips - Up to $75, • Leaving home after 4 pm $40, • Federal rate mileage reimbursement (.70/mile 2024) when driving personal vehicles on company business, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded) Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Powered by JazzHR 87TEEMFWQL

Job DescriptionIMS Recruiting is seeking a First Article Inspection (FAI) Specialist for a leading aerospace manufacturer. This role is critical to ensuring compliance with AS9102 standards and supporting manufacturing excellence. The FAI Specialist will be responsible for performing and documenting first article inspections, collaborating with cross-functional teams, and driving quality assurance in line with aerospace industry requirements.About the Role The FAI Specialist will play a key part in ensuring aerospace components and assemblies meet customer and regulatory specifications, while supporting audits, continuous improvement, and quality initiatives. Key Responsibilities * Perform First Article Inspections (FAIs) on aerospace components and assemblies in accordance with AS9102 Rev. C. * Create, review, and maintain FAI reports (Form 1, Form 2, Form 3). * Collaborate with manufacturing, engineering, and suppliers to resolve discrepancies and gather documentation. * Interpret engineering drawings, CAD models, and technical data packages (GD&T, ASME Y14.5). * Use precision measuring tools (calipers, micrometers, CMMs, etc.) to verify dimensional conformance. * Record/document non-conformances and support root cause analysis and corrective actions. * Ensure traceability of materials, special processes, and certifications. * Support audits (internal, customer, regulatory) with FAI documentation. * Submit completed FAI packages to customers via Net-Inspect. Qualifications Required: * High school diploma or GED (Associate’s or technical degree preferred). * 1–2+ years of FAI or Quality Assurance experience in aerospace or defense. * Strong knowledge of AS9102 Rev. C and aerospace quality standards. * Proficiency in reading/interpreting engineering drawings and GD&T. * Skilled with inspection tools (calipers, micrometers, CMMs, etc.). * Experience with CMM software (PC-DMIS, Zeiss Calypso, etc.) is a plus. * Proficiency in MS Office and FAI tools (Net-Inspect, InspectionXpert). * Strong attention to detail and documentation accuracy. Preferred: * Experience in AS9100D-certified environments. * Knowledge of special processes (anodizing, NDT, welding, heat treat). * Understanding of supplier quality and PPAP/FAI submissions. * Certifications in Six Sigma, Lean, or Quality (CQI, CQT). Why Join? * Work with a mission-critical aerospace supplier ensuring compliance and quality excellence. * Opportunity to grow in aerospace quality assurance and gain exposure to AS9100/AS9102 best practices. * Competitive compensation and full benefits package.

Job Description Class B Driver /Warehouse associate (one Position) Employment type: full-time Our Company is looking for a CDL B Driver/Warehouse Associate (one position) to become a part of an amazing team that will feel like family. We are happy to say that our Drivers are valued and home every night. As part of this dual position as a Driver and a Warehouse Associate, you will drive a truck or van with capacity of over or under 26, 000 GVW, primarily to deliver or pick up merchandise or packages within a specified area. You may need to load or unload the truck. As a Warehouse Associate, you will have a variety of responsibilities so things will never be boring! You will verify and keep records on incoming and outgoing shipments, prepare items for shipment, arrange by customer pick-up, and participate in assembling, addressing, and shipping materials. New Haven offers our employees benefits (medical, dental, optical, life insurance) We also offer and HSA, Flexible Spending, and a matching 401(k) Applicants must have a clear CDL B license. Would you like to join our New Haven Team? Text NHME Careers to 97211 to learn more • Principals only. Recruiters, please don't contact this job poster.Company DescriptionCelebrating over a 114 Years of Service For over a century, New Haven has been a family business that greatly values our relationships with our customers and the integrity, durability and workmanship of our products. Our products combine innovative designs, engineering excellence and top-of-the-line components and are reflective of our years of experience in and dedication to the various industries we serve. New Haven is dedicated to providing you and your company with the highest quality CORRUGATED, PACKAGING, MOVING EQUIPMENT and CARGO CONTROL available in the market. We are excited for our over 105 years in the business, during which time we have served the Moving, Transportation, Entertainment, Aeronautics, Health, and Aerospace industries, as well as Government Agencies, Universities, Libraries, Museums, and Corporations. New Haven began with a single horse-drawn wagon However, no matter how technologically advanced we have become (we were the first ever company to utilize lasers in our manufacturing of Furniture Moving Pads and our Cargo Control is now employed in outer space), we still retain a personalized orientation with our customers and care about your individual success. We have Multiple fully-stocked locations to serve you across the country, with experts in moving and product engineering happy to assist you.Celebrating over a 114 Years of Service\r\n\r\n\r\nFor over a century, New Haven has been a family business that greatly values our relationships with our customers and the integrity, durability and workmanship of our products.\r\n\r\nOur products combine innovative designs, engineering excellence and top-of-the-line components and are reflective of our years of experience in and dedication to the various industries we serve. New Haven is dedicated to providing you and your company with the highest quality CORRUGATED, PACKAGING, MOVING EQUIPMENT and CARGO CONTROL available in the market.\r\n\r\nWe are excited for our over 105 years in the business, during which time we have served the Moving, Transportation, Entertainment, Aeronautics, Health, and Aerospace industries, as well as Government Agencies, Universities, Libraries, Museums, and Corporations.\r\n\r\nNew Haven began with a single horse-drawn wagon However, no matter how technologically advanced we have become (we were the first ever company to utilize lasers in our manufacturing of Furniture Moving Pads and our Cargo Control is now employed in outer space), we still retain a personalized orientation with our customers and care about your individual success. \r\n\r\nWe have Multiple fully-stocked locations to serve you across the country, with experts in moving and product engineering happy to assist you.

Job DescriptionDescriptionThe Process Engineering group at Knowles Precision Devices is responsible for supporting and maintaining the flow of production material for the Thin Film Product Line. The Knowles Thin Film Product Line includes RF and Microwave components for applications in telecom, aerospace and defense markets. This position is a hands-on engineering role, providing daily support to operations to maintain the flow of parts, implementing new equipment and supporting a range of improvement projects. This is a fast paced position, that expects time management to support short term and long term needs of the company. Salary and title dependent on experience. Key Responsibilities • Maintain and develop Job Instructions and Work Instructions for existing and new processes, • Collect and analyze data on yields and process capability, • Provide technical skill training to operators, • Provide process support to minimize production down-time in assigned areas, • Participate in project based teams, • Support equipment troubleshooting and maintenance, • Participate in Material Review Board (MRB) for Root Cause investigations, • May support contract review and process rulebook maintenance, in support of new product designs, • 3+ years of experience supporting laser drilling/cutting equipment in a manufacturing environment, • Bachelors of Science in engineering/science, or equivalent experience, • Experience reading and understanding CAD engineering drawings using GD&T, • Experience measuring and validating workmanship to drawing specification, with optical measurement devices, • Ability to generate machine motion control programs (i.e. G-Code), • Experience authoring job instructions and work instructions, • Proficiency in statistical methods (DOE, SPC, FMEA) and data analysis tools (e.g., JMP, Minitab, MATLAB, Python, SQL), • Strong written and verbal communication skills, communicating to both operators and management, • Willingness to train others and work as a member of inter-disciplinary teams, • Must be able to perform lab duties in an ISO certified clean room, meeting gowning, ESD, and EHS requirements., • Medical, dental and vision insurance plans, • Prescription Drug Plans, • Basic Life Insurance, • 401k plan with company match, • Tuition Reimbursement Program, • Security Clearance Incentive Program, • Employee Referral Program, • Overtime opportunities, • Alternate work schedules available, • PTO (10 days) and NYS Sick and Safe Leave, • Paid HolidaysExciting Onsite Perks:, • Free Starbucks coffee available at our café, • Free access to our Fitness Center, • Fresh food is available for purchase in the cafeteria store. ITAR Statement: Please note that this position may require access to technical data controlled under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants must be U.S. persons (citizens, lawful permanent residents, or individuals granted refugee or asylee status) or have the necessary authorization to access controlled technical data. Compliance with ITAR and EAR regulations is a condition of employment. Notice to Staffing Agencies, Search Firms and Recruitment Agencies: The recruitment process at Knowles is managed through the Human Resources department. Knowles does not accept resumes submitted from 3rd party agencies outside of our system. To submit resumes, 3rd party agencies will need to be a pre-approved vendor with a valid contract in place, be actively engaged by Knowles to recruit for a specific position and have agency log in credentials to submit candidates to our careers portal. Please do not submit resumes via e-mail, through our external website or directly to our employees. Any resumes submitted in this way become the property of Knowles and will not be eligible for any placement fee.

Job DescriptionAbout Nominal Nominal is building the software infrastructure powering the world’s most advanced hardware systems — from spacecraft and autonomous vehicles to next-generation industrial machines. Our platform ingests high-rate telemetry, validates complex autonomy software in real time, and enables engineers to iterate faster without sacrificing safety or precision.We’re a small, fast-moving team of engineers and operators with deep experience from companies like SpaceX, Palantir, Anduril, and Applied Intuition. We’re backed by Sequoia, General Catalyst, Founders Fund, Lux Capital, and Lightspeed Ventures — and we serve a range of top-tier commercial and defense customers, including the U.S. Navy, Air Force, Shield AI, and Anduril.At Nominal, we enable hardware engineers to push the boundaries of technology — with speed, safety, and precision. As an Area Director, you’ll play a critical leadership role in driving Nominal’s go-to-market success. You'll be on the front lines of selling a modern software platform into hardware-centric organizations from aerospace to defense to industrial automation.This is not a traditional SaaS sales role. You’ll own complex, high-value enterprise deals, build deep technical relationships, and guide customers through a sophisticated solution-selling journey. You’ll also help build the foundation of our sales team and culture, contributing to our overall sales strategy and operating model.\uD83D\uDCBC What You'll Do • Own the Team Build and recruit a high performing team focused on pipeline generation, value driven discovery and closing Guide deals from initial outreach to signed contract, aligning stakeholders at every level., • Build the Relationship Engage with technical buyers, executives, and frontline engineers alike. Host executive dinners, attend key industry events, and stay tapped into your customers' priorities and challenges., • Craft the Strategy Develop strategic account plans that target first-mover programs, then expand across the enterprise. Understand the internal dynamics and identify champions who will advocate for Nominal., • Sell to Outcomes Frame our value in terms of customer outcomes — speed, safety, and deployment scale. You’ll translate complex engineering goals into a compelling software value proposition., • Partner Effectively Leverage the broader Nominal team — from engineering to operations — to support technical discovery, demos, integration scoping, and infosec reviews. Collaborate cross-functionally to deliver tailored collateral and messaging., • Maintain the Forecast Own a robust book of business, tracking long-lead opportunities and delivering accurate, data-driven forecasts that align with company goals., • Build the Team Help define what “great” looks like for our sales function. Mentor early hires, shape sales processes, and build a winning, ownership-oriented culture.\uD83D\uDD0D What We’re Looking For, • Enterprise Sales Experience 3+ years of experience in Leadership, particularly in enterprise or strategic sales, ideally closing seven-figure technical deals into industrial, defense, or hardware-centric companies., • Solution Seller You’re a consultative, outcome-oriented seller who thrives in multi-stakeholder environments. You know how to pull together the right internal team to win., • Technical Fluency You’re comfortable speaking to engineers, architects, and IT leaders. Bonus if you’ve sold into environments with complex telemetry, testing workflows, or autonomy software., • Relationship-Driven You build lasting, trust-based relationships. You understand customer org charts, incentive structures, and how to align stakeholders., • Industry Familiarity You’ve sold data, infrastructure, or developer platforms into industrial/manufacturing, aerospace, defense, or heavy industry. You know how these companies operate., • Leadership & Team Player You lead by example and lift up those around you. You’ve mentored other sellers and are excited to help build a high-performance sales org., • Ready to Roll You’re energized by travel, on-site demos, and face-to-face meetings. You’re hands-on and biased toward action.⚡️ Skills That Supercharge Us, • CRM & Sales Stack Fluency: HubSpot, Salesforce, LinkedIn Sales Navigator, ZoomInfo, Common Room, Notion, Slack, • Technical Tools Familiarity: AWS, Azure, Databricks, Snowflake, MATLAB, Grafana, • Data Proficiency: SQL, Python, Pandas, Timescale, Spark, Kafka, Beam, Flink, • Engineering Background: Degree or experience in mechanical engineering or similar field✨ Benefits/Perks, • \uD83C\uDFE5 100% coverage of medical, dental, and vision insurance, • \uD83C\uDFD6️ Unlimited PTO and sick leave, • \uD83C\uDF7D️ Free lunch, snacks, and coffee, • \uD83D\uDE80 Professional Development Stipend

Job Description About the Company Our client is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. They are on a mission to create a limitless source of zero emission energy for a sustainable future. This is a direct hire, permanent placement position for a client of AdAstra Talent Advisors. About the RoleOur client is seeking experienced, highly motivated magnet engineers to join its rapidly growing team. The magnet engineering roles will design, build, and test high temperature superconducting ("HTS") magnets. HTS magnets are foundational components of the company's planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you'll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Responsibilities • Rapidly design, build, and test HTS magnets, • Develop specifications for magnets based on system design and performance goals, • Optimize magnet design and run analysis using Multiphysics simulation software (e.g. Ansys EM, Structure, COMSOL, etc.), • Develop design tools, data analysis software, and algorithms using Python or similar, • Incorporate design for manufacturing principles and support first builds, • Produce design specifications and collaborate with vendors to get quotes and deliver hardware that meets qualifications, • Support the implementation of tooling and manufacturing, • Design and execute magnet testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersRequirements, • At least a bachelor's degree in physics, computer science, electrical engineering, mechanical engineering, materials engineering, or related fields, • 5-10+ years of relevant experience, • Experience with magnets, cryogenics, vacuum systems, or transformer design, • Experience in design using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience with Ansys and/or COMSOL, • Experience specifying machining, welding, and fabrication requirements, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one's own, • Full-time, on-site positionBenefit Highlights, • Competitive salary, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • Open vacation policies, • Work-life balanceCompensation is determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. Equal Opportunity Our client is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. About AdAstra AdAstra Talent Advisors is a headhunting and talent advising firm focused on the Climate, Space, and Defense sectors of Hard Tech. We specialize in pairing highly technical and executive talent with some of the world’s leading Hard Tech startups. At AdAstra, we catalyze the innovations that future generations depend on by placing the right people in the right seats. Our dedicated work enables inconceivable technology from Earth, to the stars. And it’s all because of trailblazing talent like you - those driven to do what’s never been done before. We care about long term relationships with both candidates and companies. Even if the role we initially discuss isn’t a perfect fit, it’s likely we’ll have something relevant to share with you in the future. Join us on our journey by following along via LinkedIn! CEO, Seyka Mejeur | LinkedIn profile CTO / COO, Brian Mejeur | LinkedIn profile AdAstra Talent Advisors | LinkedIn profile AdAstra Website

Job DescriptionAbout Nominal Nominal is building the software infrastructure that powers the world’s most advanced hardware systems — from spacecraft and autonomous vehicles to next-generation industrial machines. Our platform ingests high-rate telemetry, validates complex autonomy software in real time, and helps engineering teams iterate faster without sacrificing safety or precision. We’re a small, fast-moving team of engineers and operators who own problems end-to-end, work across disciplines, and thrive on solving challenges at the intersection of hardware and software. As a dual-use platform, we're serving top-tier commercial and defense customers, including the U.S. Navy, United States Air Force, Shield AI, and Anduril. We’re backed by top-tier investors — Sequoia, General Catalyst, Founders Fund, Lux Capital, and Lightspeed Ventures — who share our mission to accelerate innovation in mission-critical systems. Our team brings experience from SpaceX, Palantir, Anduril, Applied Intuition, and other leading companies, united by a common goal: enabling hardware engineers to push the boundaries of advanced technology with speed, safety, and precision. As a Product Designer at Nominal, you will operate at the intersection of design and engineering, transforming complex data and workflows into intuitive, high-performance user experiences. You will collaborate closely with cross-functional teams to prototype, build, and refine features that enhance our platform's usability and functionality.\uD83D\uDE80 About the role • Lead the design lifecycle for mission-critical features and end-to-end workflows, from initial concept through to implementation., • Design novel interactions that extend the capabilities of human-to-machine interfaces., • The ability to design systems that solve both the immediate product problem and lay a foundation for the future. We want someone who understands the importance of design systems., • Understand and bring clarity to technical topics using concrete design outputs i.e., diagrams, data visualizations, layout, typography, interactions, and the like, • Collaborate closely with our customers to synthesize feedback and drive high-quality, impactful design solutions., • Contribute strategically to the product and design direction, making pivotal decisions that influence the future of Nominal's platform., • Use storytelling and design thinking to bring stakeholders together, aligning them with your vision and process., • Maintain a relentless focus on craft, constantly seeking to elevate the user experience by incorporating novel design solutions.\uD83D\uDD0D We're looking for someone with, • A minimum of 5+ years of experience as a designer for software development, with a strong emphasis on visual and interaction design., • Expertise in Figma, with a strong foundation in prototyping, testing, and implementation., • The ability to adapt to technical constraints in creative ways using your knowledge of web technologies., • An exceptional portfolio showcasing expertise in creating multimodal experiences., • A keen ability to articulate the rationale, process, and impact behind your design decisions., • A versatile skill set that does not require prior hardware experience but is capable of navigating highly technical environments, including aerospace, defense, and advanced energy applications., • An enthusiastic approach to problem-solving in complex scenarios, with a willingness to engage in customer immersion activities and on-site visits., • A background or experience in front-end software engineering is a big plus.✨ Benefits/Perks, • \uD83C\uDFE5 100% coverage of medical, dental, and vision insurance, • \uD83C\uDFD6️ Unlimited PTO and sick leave, • \uD83C\uDF7D️ Free lunch, snacks, and coffee, • \uD83D\uDE80 Professional Development Stipend

Job Description Assembly is a fast-growing, venture-backed company with the ambition to transform the way we design and deliver imaginative, innovative urban architecture. We combine technology, design, architecture, and manufacturing to create mid/high-rise urban buildings that are greener and higher-quality, using a system that is faster and more efficient. As our pipeline grows and the system is refined, we unlock increasing cost efficiencies, ensuring long-term value for developers and the industry. As the Director of Manufacturing Engineering, you will define and implement the playbook for fabricating and assembling Assembly modular units within both existing and new manufacturing facilities. You and your team will codify the entire manufacturing process, ensuring that third-party factories can efficiently and precisely build our high-rise modules. This includes developing repeatable, scalable work instructions, designing transportable and reusable tooling, integrating digital manufacturing technologies, and serving as sustaining engineers to drive continuous improvement. While the goal is to scale through external partners, you must also be prepared to establish and manage temporary in-house assembly operations when necessary, requiring adaptability and strategic problem-solving. This role is essential to executing Assembly’s vision for distributed manufacturing, ensuring seamless integration between design, engineering, and production. You will be responsible for standardizing processes across third-party factories while also maintaining the technical and operational readiness to establish rapid-deployment assembly facilities when needed. Your leadership will ensure that every Assembly module is built with precision, efficiency, and consistency, regardless of location. You Will: Shape the future of industrialized construction by applying advanced manufacturing principles to an industry ripe for transformation. Design a first-of-its-kind manufacturing system that scales modular high-rise construction across multiple factories, integrating automation and digital workflows. Lead the convergence of aerospace- and automotive-grade manufacturing with building construction, developing processes that drive quality, efficiency, and scalability. Develop and implement a scalable manufacturing system that enables partner factories to efficiently fabricate and assemble modular units while maintaining the capability to launch in-house assembly operations when needed. Create a standardized manufacturing playbook, defining labor requirements, detailed work instructions, and quality control measures to ensure consistent production across multiple facilities Leverage digital manufacturing technologies (MES, ERP, and factory automation tools) to optimize assembly processes, monitor production quality, and drive operational efficiency. Lead process innovation and continuous improvement, acting as sustaining engineers to refine manufacturing workflows based on feedback from production partners. Establish and oversee pilot programs and first-article builds to validate new processes, tooling, and quality standards at partner facilities. Collaborate cross-functionally with supply chain, logistics, and design teams to seamlessly integrate manufacturability with design intent Define and track key performance indicators (KPIs) to measure production efficiency, scalability, and quality performance. Develop and lead a high-performing manufacturing engineering team, fostering a culture of trust, innovation, and professional growth. Work closely with executive leadership to align manufacturing strategies with overall business objectives while maintaining cost-effectiveness through Capex and Opex forecasting. Champion lean manufacturing principles in collaboration with partner factories, improving efficiency, quality, and cost-effectiveness at scale. You Have: Experience in high-precision, scalable manufacturing industries such as aerospace, automotive, or industrial equipment, with an interest in applying these skills to the built environment. A Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Aerospace Engineering, or a related discipline. 10+ years of experience in manufacturing engineering, process development, or production engineering in industries such as aerospace, automotive, or industrial manufacturing. The ability to think beyond traditional factory models and implement distributed, flexible manufacturing strategies that scale across multiple production sites. A background in designing and optimizing manufacturing processes for complex, large-scale products, with a focus on modularization and efficiency. Strong problem-solving skills with a systems engineering mindset—able to connect design, supply chain, production, and logistics into a seamless workflow. Experience designing transportable and reusable tooling and fixtures to optimize manufacturing efficiency and scalability. Proficiency with Manufacturing Execution Systems (MES), ERP systems, and digital factory tools, along with the ability to develop detailed work instructions and labor requirement documents for production teams. The ability to work with cross-functional teams, external suppliers, and manufacturing partners to drive scalable production solutions. You Are: A strategic planner and a hands-on operator, comfortable working in both partner-driven and in-house assembly environments. Capable of building and launching a rapid-deployment assembly facility. A clear communicator who can translate complex manufacturing requirements into actionable plans for both internal teams and external partners. Passionate about solving engineering challenges that blend digital and physical manufacturing, bringing industrialized processes to an industry in transformation. A manager of complex challenges with a solutions-oriented mindset, ensuring agility and efficiency in a rapidly evolving industry. A proven leader who leverages emotional intelligence and empathy to create an inclusive, high-trust work environment, enabling teams to perform at their best. Compensation Range: $170k- $250k / year Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills and experience. Equal Employment Opportunity (EEO) Statement Our company does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factor. To Apply Submit: To apply, submit your application at the top of this page or visit our Careers Page.

Job DescriptionDescriptionThe Manufacturing Engineering group at Knowles Precision Devices is responsible for process engineering, yield improvement and new process introduction. The Knowles Thin Film Product Line includes RF and microwave components and custom built substrates for applications in telecom, aerospace and defense markets. This position is a hands-on engineering role with project management responsibilities for an experienced engineer in solving complex problems, while providing support to operations through improving yield, improving the flow of parts and implementing new equipment. This is a fast paced position, working on parallel projects that requires time management to support short term and long term needs of the company. Salary and title dependent on experience. Key Responsibilities • Participate in, organize and run yield improvement projects, relying on knowledge of processes, systems of systems, and LSS methodologies in support of organizational goals, • Work with multi-disciplinary (materials, chemistry, mechanical, RF, electronics) and cross-functional (operations, engineering, QA, CI) teams, • Run equipment, processes and experiments in an operational environment, • Collect and analyze data on yield and process capability, • Update and develop operations documentation (WI/JI) for existing processes and new processes, • Participate in Material Review Board (MRB) and Failure Review Board (FRB) for Root Cause investigations, • 7+ years’ experience supporting manufacturing in process engineering, QA or continuous improvement roles., • 3+ years’ direct experience with semi-conductor or thin film processes such as: Photolithograpy, electrolytic and electroless plating, Sputter, CVD or other vacuum deposition, Plasma etching, or die singulation, • Bachelors of Science in engineering or science, or equivalent experience, • Experience with statistical methods (DOE, SPC, FMEA) and data analysis tools (e.g., JMP, Minitab, MATLAB, Python, SQL), • Experience reading and understanding CAD engineering drawings using GD&T, • Experience measuring and validating workmanship to drawing specification, • Experience authoring job instructions and work instructions, • Strong written and verbal communication skills, communicating to both operators and management, • Willingness to train others and work as a member of inter-disciplinary teams, • Leadership or supervisory experience a plus, • Project management experience; certification a plus, • Must be able to perform lab duties in an ISO certified clean room, meeting gowning, ESD, and EHS requirements., • Medical, dental and vision insurance plans, • Prescription Drug Plans, • Basic Life Insurance, • 401k plan with company match, • Tuition Reimbursement Program, • Security Clearance Incentive Program, • Employee Referral Program, • Flex PTO and NYS Sick and Safe Leave, • Paid HolidaysExciting Onsite Perks:, • Free Starbucks coffee available at our café, • Free access to our Fitness Center, • Fresh food is available for purchase in the cafeteria store. ITAR Statement: Please note that this position may require access to technical data controlled under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants must be U.S. persons (citizens, lawful permanent residents, or individuals granted refugee or asylee status) or have the necessary authorization to access controlled technical data. Compliance with ITAR and EAR regulations is a condition of employment. Notice to Staffing Agencies, Search Firms and Recruitment Agencies: The recruitment process at Knowles is managed through the Human Resources department. Knowles does not accept resumes submitted from 3rd party agencies outside of our system. To submit resumes, 3rd party agencies will need to be a pre-approved vendor with a valid contract in place, be actively engaged by Knowles to recruit for a specific position and have agency log in credentials to submit candidates to our careers portal. Please do not submit resumes via e-mail, through our external website or directly to our employees. Any resumes submitted in this way become the property of Knowles and will not be eligible for any placement fee.

Job DescriptionA World-Changing Company Palantir builds the world’s leading software for data-driven decisions and operations. By bringing the right data to the people who need it, our platforms empower our partners to develop lifesaving drugs, forecast supply chain disruptions, locate missing children, and more. The Role Backend Software Engineers at Palantir build software at scale to transform how organizations use data. Our Software Engineers are involved throughout the product lifecycle, from idea generation, design, prototyping, and production delivery. You will collaborate closely with technical and non-technical teammates to understand our customers' problems and build products that solve them. We encourage movement across teams to share context, skills, and experience, so you'll learn about many different technologies and aspects of each product. Engineers work autonomously and make decisions independently, within a community that will support and challenge you as you grow and develop, becoming a strong technical contributor and engineering leader. Our Product Development organization is made up of small teams of Software Engineers. Each team focuses on a specific aspect of a product. Our infrastructure teams are responsible for the lowest layers of our software stack, often focused on database technologies, distributed systems, large scale data systems, security, and application infrastructure. As a Software Engineer on infrastructure, you'll contribute high-quality code to underpin Palantir Foundry and Gotham with performant, secure, and scalable building blocks, enabling products deployed to the most important institutions in the public and private sector. You'll build the foundational capabilities that power our products used by research scientists, aerospace engineers, intelligence analysts, and economic forecasters, in countries around the world. We’re hiring engineers who are passionate about solving real-world problems and empowering both developers and end-users to work optimally. If you’re motivated to develop reliable, performant, and scalable systems, and to design robust APIs and primitives, this role offers the opportunity to make a significant impact on our products and the people who use them.Core Responsibilities • Building a performant search and indexing ecosystem for complex granularly permissioned data, • Contributing to open-source data processing libraries, integrating the latest innovations to achieve performance gains, • Building the distributed systems that power large scale compute workloads, orchestrating and efficiently scheduling hundreds of thousands of containers every hour, • Designing architecture and opinionated APIs to keep application developers on the happy path, • Tracing and performance observability in high scale distributed microservice architectures, • Building reliant, performant, and scalable systems for storage, auth, or asset serving to enable other product teams to build robust applications without deep domain expertise in the underlying systems, • Automating the deployment, management, and operations of complex distributed systems like Cassandra, Elasticsearch, Kafka, and more across different environmentsTechnologies We Use, • Different backend languages, including Java, Rust, and Go, • Open-source technologies like Cassandra, ElasticSearch, Spark, Kafka, Kubernetes, Flink, • Industry-standard build tooling, including Gradle and GitHubWhat We Value, • Demonstrated ability to collaborate and empathize with a variety of individuals. Able to iterate with users and non-technical stakeholders and understand how technical decisions impact them., • Ability to learn new technology and concepts, even without in-depth experience. Experience developing and managing highly-available distributed systems is beneficial, but not required., • Bias towards quality and thoughtful about edge cases (“anything that can go wrong will go wrong”); writes code that is defensive against all possibilities., • Builds solutions and APIs with users in mind while maintaining a high engineering bar. Seeks to centralize and abstract complexity away from our users in order to expose simple, powerful APIs for consumers., • Active US Security clearance, or eligibility and willingness to obtain a US Security clearance is beneficial, but not necessary.What We Require, • Engineering background in Computer Science, Mathematics, Software Engineering, Physics or similar field., • Strong coding skills with demonstrated proficiency in programming languages, such as Java, C++, Python, Rust, or similar languages., • Familiarity with storage and data processing systems, cloud infrastructure, and other technical tools.

Job Description Under minimum supervision working from blueprints, sketches written and/or verbal instructions, sets up and performs the most diversified and complex progressive machining, fitting and assembly operations. Determines proper tooling and sequence of operations, and skillfully uses all machinists’ hand tools and machine shop measuring equipment in order to produce work to specifications. Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tool to be used. ESSENTIAL FUNCTIONS • Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tools to be used., • Must be able to skillfully use all machinist’s hand tools and measuring instruments., • Must be familiar with the machining of most materials., • Must be able to use advanced shop math, including trigonometry., • Moves parts to and from the work area., • Maintains good housekeeping in the work area., • Meets all safety requirements in the machine shop and follows all company policies., • Requires a High school diploma or equivalent education, • Requires the completion of an apprenticeship program or similar on the job experience of approximately four years or at least five years experience as a machinist., • Ability to operate standard and specialized equipment to produce prototype and/or production parts, • Ability to perform standard shop computations, using technical math, geometry and trigonometry., • Proficient use of set up and operation of CNC machining center., • Proficient use of tool and surface grinders, • Proficient use of all shop inspection equipment, including but not limited to, CMM, comparator, digital height gages, micrometers, etc., • Moderate physical activity. The job location is at 2 Lawrence Road, Springfield, NJ 07081 We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated manufacturing engineers to join its rapidly growing team. The Manufacturing Engineering role will develop and implement processes, tooling, and equipment necessary to manufacture and test high temperature superconducting (“HTS”) magnets. This role will also help establish the foundations of Process Engineering and Quality Engineering at Thea Energy as we build and commission a magnet manufacturing and test facility. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibilities: • Generate documentation for the manufacture of HTS magnets, including processes and procedures, work instructions, and quality criteria, • Design, build, and commission magnet manufacturing tooling and equipment, • Work iteratively with magnet engineers to incorporate design for manufacture and lessons learned, • Develop and implement virtual and physical inventory management and manufacturing BOMs, • Generate specifications for and collaborate with vendors to procure hardware that meets quality specifications, • Define roles for and coordinate onboarding of manufacturing technicians, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersQualifications:, • Experience with first encounters of complex hardware assemblies, • Experience scaling from first-of-a-kind to continuous production, • Experience generating and interpreting manufacturing drawings, particularly GD&T, • Experience with fusion processes, including soldering, brazing, and welding, • Experience with planning and execution software including PLM, MRP, and inventory management, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in mechanical engineering, manufacturing engineer, or related field, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $100,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionJob SummaryAre you passionate about driving business growth in the aerospace, defense, and space industries? Our client is expanding their operations to the United States and is seeking a Business Development Specialist to play a key role in developing and expanding business in the U.S. market. Our client needs a motivated individual with a deep understanding of the aerospace industry and a proven track record of driving growth.Responsibilities: • Market Research and Analysis: Keep updated on industry trends and technological advancements., • Business Development Strategy: Develop and implement plans to expand our presence in the U.S., • Relationship Building: Forge strong connections with key industry players., • Proposal Development: Create compelling proposals for potential clients., • Sales and Revenue Generation: Achieve sales targets and convert leads into clients.Qualifications and Skills:, • Bachelor’s degree in business or engineering., • Proven experience in business development within the aerospace, defense, or space industry., • Excellent communication skills and the ability to build strong relationships., • Results-driven with a proven track record in meeting sales targets., • Self-motivated and willing to travel for business needs.Benefits:, • Competitive salary, • Paid vacation and sick time, • Health insurance including medical, dental, and vision, • 401k contributionThis is an exciting opportunity to be part of a leading aerospace precision ball bearing business with a rich history and commitment to excellence. Apply now and elevate your career to new heights in the aerospace industry.

Job Description At Near Space Labs we design, build and operate a fleet of stratospheric robots to image the earth. We launch our proprietary, balloon-based imaging robots to heights between 40,000 and 60,000 feet. From this vantage point, we capture petabytes of imagery for a variety of use cases. Our mission is to provide high quality, updated imagery that we believe should be accessible to everyone who needs it. By approaching earth imaging from a new vantage point and applying cutting edge methodologies, we drive faster aerospace innovation without tradeoffs. We are always on the look out for creative, curious, and diverse problem solvers who thrive in organized chaos. If you're a hardworking innovative thinker who is passionate about pushing boundaries in the aerospace field and contributing to a collaborative environment, then we want to hear from you. Locations Brooklyn, NY / US (remote) Barcelona, Spain / EU nationals or work permit holders General Skills We Look For: Not all of this is required • Bachelor's degree in Business, Data Science, Management Information Systems or a related analytical field., • Bachelor's degree in Data Analytics, Computer Science, Information Systems, Business Administration, or a related field, or equivalent professional experience., • 3+ years of experience working with technical hardware, or a BS degree desirable but not essential., • Experience in an engineering production or maintenance organization., • A proven track record of 2-5 years in a relevant field, demonstrating expertise and experience., • Demonstrated experience in managing teams, effectively delegating tasks, and optimizing operational workflows to achieve desired outcomes., • Exceptional ability to manage multiple projects simultaneously, prioritize tasks effectively, and ensure adherence to strict deadlines., • A solid background in workflow coordination, efficient task assignment, and the implementation of robust quality assurance processes, preferably within a data-intensive environment., • Ability to review processing performance metrics, identify trends, and suggest data-informed improvements to existing workflows., • Familiarity in using workflow management tools such as Airtable or similar platforms for effective task tracking and team collaboration is a plus., • An exciting startup culture where you will have the opportunity to play a critical role in building and scaling a one-of-a-kind technology and organization., • You will be part of an enthusiastic, international and motivated team of professionals who are committed to building unique technologies, being rigorous, and finding novel solutions to interesting problems., • A diverse and inclusive workplace where we welcome people of different backgrounds, experiences and perspectives., • A commitment that you will never be bored., • Medical, dental, and vision coverage. Near Space Labs is committed to diversity in our organization and building an equitable and inclusive environment for people of all backgrounds and experiences. Near Space Labs provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics.

Job DescriptionAbout Voyant Photonics Voyant Photonics is redefining machine perception with compact, high-performance LiDAR devices that fit in the palm of your hand. Leveraging cutting-edge silicon photonic chips, our sensors deliver unparalleled accuracy in range, velocity, and reflectivity, at a fraction of the cost of traditional LiDAR systems. By transforming high-precision sensing into an accessible technology, we are enabling new applications in robotics, autonomous systems, industrial automation, and beyond. At Voyant, we are not just building products, we are advancing an industry. Our breakthrough technology bridges the gap between research and real-world deployment, making high-performance LiDAR scalable and commercially viable. The Role At Voyant Photonics, we are redefining the future of LiDAR, and we’re looking for a visionary Vice President of Engineering to lead that charge. In this role, you’ll guide our world-class engineering and test teams as we scale from breakthrough research into structured, repeatable production, transforming innovation into reliable, customer-ready products. You will be the senior, hands-on technical leader responsible for driving the transition from prototype to mass production, ensuring our products are not only innovative but also manufacturable, reliable, and scalable. The ideal candidate combines deep technical expertise in hardware and systems engineering with a proven record of delivering precision-engineered products at scale. You have led production ramp-ups through contract manufacturing and supply chain partnerships, ideally within complex, high-performance sectors such as automotive, robotics and industrial automation, smart infrastructure, AR/VR, consumer devices, or LiDAR, but we’re open to others, too. You will lead a multidisciplinary team spanning mechanical engineering, electronics, optics, firmware, and software, while working closely with the leadership team to align technology development with business objectives. Beyond the lab, you’ll engage with customers, partners, and investors, serving as a key technical voice in shaping our roadmap and driving adoption. Your role as visionary leader and your knowledge of LiDAR technology will make a difference in the capability to bring cutting-edge innovations to the mass market. You won’t just lead engineering execution, you’ll help set the standard for an entire industry. This is a rare opportunity to build, scale, and innovate at the frontier of photonics and LiDAR technology. What we’re building has never been done before. The world has been waiting for what we’re creating, a new class of machines that can see and understand the world with unprecedented accuracy and scalability. Through our novel design and system-level innovation, we’re unlocking a future where intelligent perception is no longer a limitation, but a foundation for what comes next. Location: New York City, NY (on-site). We offer relocation assistance and are flexible in supporting your transition to New York City. Key Responsibilities * Own and drive hardware engineering across electronics, mechanical assembly, optics, and embedded systems to deliver scalable, high-performance LiDAR solutions. * Lead the transition from R&D and prototyping to full-scale mass production, ensuring reliability, cost-effectiveness, and manufacturability. * Ensure engineering deliverables are aligned with product requirements and customer needs. * Develop and implement best-in-class engineering processes, including requirements management, design validation, and rigorous product lifecycle management. * Drive system-level technical decisions on engineering tradeoffs, balancing performance, manufacturability, cost, and timelines * Build and develop a cross-disciplinary engineering team to bring a first-of-its-kind product to market * Manage production ramp-up, scaling from low-volume sample assembly to 1,000+ units per month through contract manufacturing. * Drive technical alignment with the product roadmap, balancing innovation with execution and delivery timelines. * Collaborate with leadership across product, sales, and operations to ensure alignment between technical and business objectives. Required Qualifications * 10+ years of experience leading engineering teams in hardware and software product development. * Proven track record of shipping complex electronic hardware at scale. * Experience in development, testing and validation of LiDAR sensors. * Experience in high-volume product development at an established company (consumer electronics, automotive, robotics, or similar). * Expertise in contract development and manufacturing, outsourcing and offshore supply chains. * Strong leadership skills with the ability to inspire, mentor, and grow a world-class engineering team. * Proven track record of large, multidisciplinary teams management delivering technology to mass production. * Deep technical knowledge in system architecture, hardware design, and embedded software. * Experience driving New Product Introduction (NPI) and scaling production lines. * Bachelor’s or Master’s degree in Engineering or a related field. Preferred Qualifications * Experience with high-reliability or extreme-environment design (e.g., automotive, aerospace, defense). * Familiarity with functional safety standards (ISO 26262, IEC 61508, or similar). * Background in photonics, optics, or semiconductor-based sensing technologies. * Prior experience leading engineering at an early-stage startup, scaling from prototype to mass production. Compensation & Benefits * Competitive salary and meaningful equity package * Comprehensive health benefits (Medical, Dental, Vision) * Unlimited PTO and paid company holidays * Flexible work environment (Hybrid or remote with travel) * Team events and company meetups Equal Opportunity Employer Voyant Photonics is an equal opportunity employer committed to building a diverse and inclusive workplace. We welcome applicants from all backgrounds and do not discriminate based on race, color, religion, gender, gender identity or expression, sexual orientation, pregnancy, marital or partnership status, age, national origin, citizenship, veteran or military status, disability, medical condition, genetic information, caregiver status, or any other characteristic protected by law.

Job DescriptionAbout NominalNominal is building the software infrastructure powering the world’s most advanced hardware systems — from spacecraft and autonomous vehicles to next-generation industrial machines. Our platform ingests high-rate telemetry, validates complex autonomy software in real time, and enables engineers to iterate faster without sacrificing safety or precision. We’re a small, fast-moving team of engineers and operators who own problems end-to-end, work across disciplines, and thrive on challenges at the intersection of hardware and software.As a dual-use platform, we serve top-tier commercial and defense customers, including the U.S. Navy, United States Air Force, Shield AI, and Anduril. We’re backed by Sequoia, General Catalyst, Founders Fund, Lux Capital, and Lightspeed Ventures. Our team draws experience from SpaceX, Palantir, Anduril, Applied Intuition, and other leading companies — united by a common mission: enabling hardware engineers to push the boundaries of advanced technology with speed, safety, and precision.In this pivotal role, you'll deliver Nominal’s vision of providing continuous testing to the industrial base, equipping engineers to deploy capability, at scale, in the shortest time possible. You’ll be working across accounts ranging from large enterprises to innovative startups, selling a modern software platform to hardware organizations. It’ll be your role to demonstrate and communicate how our technology fits into their existing stack and helps them meet their critical testing outcomes. You will also be counted on to shape the early sales team and its culture.\uD83D\uDE80 About the role • Solution scoping & collaboration — Collaborate deeply with Sales, Mission, Product, and Engineering teams to understand customer requirements, scope feasible solutions, and align on technical feasibility., • Customer discovery & advocacy — Gain holistic insight into customer pain points and feedback to understand and quantify ways Nominal can benefit; while also helping to refine Nominal’s roadmap and messaging., • Technical pre-sales excellence — Deliver persuasive, tailored demos, PoCs, and technical presentations, effectively communicating Nominal’s platform value to C-level executives, systems architects, engineering leads, testing managers, and IT stakeholders., • Customize & prototype — Design custom demo workflows, extensions, or integrations (e.g. data ingestion pipelines, automation scripts) that showcase how Nominal delivers real-world impact across ambiguous or edge-case scenarios., • Strategic opportunities — Partner with Account Executives to build account plans, identify internal champions, and navigate complex buying processes—including IT, compliance, and financial stakeholders., • Team enablement & knowledge sharing — Co-create battle cards, talk tracks, and technical collateral. Mentor junior team members and support the evolution of Nominal’s pre-sales methodology.\uD83D\uDD0D We're looking for someone with, • Proven experience: 5–10 years in technical pre-sales, solutions engineering, or sales engineering roles at high-growth enterprise software companies, ideally with exposure to aerospace, defense, or industrial customers. You’ve consistently partnered with Account Executives to close complex, multi-stakeholder deals, and can point to examples where your technical guidance directly enabled customer adoption., • Technical fluency — You’re deeply conversant in cloud infra and analytics tooling (AWS, Azure, Databricks, Snowflake, Influx, Grafana) and can speak confidently with engineers in hardware or systems domains., • Coding & data proficiency – You have expertise in coding with SQL, Python, and Pandas, as well as familiarity with Spark, Arrow, Kafka, Beam, and Flink., • Solution-selling mastery — You’ve successfully supported sales of technical platforms—ideally (but not necessary) in aerospace, defense, industrial automation, or manufacturing—and know how to integrate technical messaging into a compelling narrative., • Collaborative & customer-obsessed — You thrive when aligning cross-functionally and building trust with customers and internal stakeholders alike., • Adaptability & ownership — You flourish in dynamic, startup-like environments and can pivot quickly in ambiguous scenarios., • Travel readiness — Willing to travel ~25-50% to visit customer sites (e.g., manufacturing floors, test facilities, cleanrooms).⚡ Skills that supercharge us, • Demo creation and delivery: Ability to develop “outside-in” demo environments that start from the perspective of a target industry or vertical, design representative telemetry data and stories that illustrate Nominal’s value in real-world contexts, and showcase hardware test scenarios in front of executive and engineering audiences. [Insert], • In-field hardware mastery: Proficiency with hardware engineering tools such as DAQs, DDS, Nix, RTOS, MCAP, H5, TDMS, LabView, MATLAB/Simulink, and WinPlot., • Technical background or degree: Background in computer science, mechanical engineering, or other heavy industry✨ Benefits/Perks, • \uD83C\uDFE5 100% coverage of medical, dental, and vision insurance, • \uD83C\uDFD6️ Unlimited PTO and sick leave, • \uD83C\uDF7D️ Free lunch, snacks, and coffee, • \uD83D\uDE80 Professional development stipend

Job Description Bacik Group is actively searching for a Senior Electrical Engineer - Medium - High Voltage Power Design - to support the FAA's Facilities Engineering Branch in Atlantic City, New Jersey. Candidate will provide expertise in the application of state-of-the-art technology to meet the mission requirements of the Customer with a primary focus on facility and site infrastructure and systems. The candidate must possess, at a minimum, a Bachelor’s degree in Electrical Engineering from an accredited college or university. Duties • Experience working on critical systems and technologies, including lightning and surge protection systems, lighting systems, electrical panels, arc flash hazards analysis, substations, switchgear, branch circuits, feeders, and transformers., • Conduct Electrical Power Surveys, • Design Electrical Modifications to buildings and equipment., • Provide estimates and support design and construction efforts., • Support the development of the electrical portion of the A/E SOW & cost estimates, design reviews/comments, progress meeting attendance, • Determine electrical loads requirements, and develop any documentation required to support the design., • Develops Scopes of Work., • Identify power panels, air conditioning units, etc. utilizing correct equipment name/designation, • Create a correct single line tracing all the electrical panels all the way up to the substation where they are connected. Identify transformer sizes, correct breaker sizes, and breaker amperage rating as well as breaker trip rating., • Gather electrical readings and add information to single line diagram. If drawings, single line diagrams, and layouts are already available, verify accuracy, correct any errors, and provide information., • Support design of Lightning and Surge Protection, Grounding, Bonding, and Shielding Requirements for Facilities and Electronic Equipment., • Communicate effectively with the FAA Electrical Engineering team and project stakeholders., • Support cable TV and internet connectivity initial installation and troubleshooting., • Identifies potential hazards and implements mitigation methods., • ·Maintains knowledge of current electrical and building codes and technologies through research and training., • ·Assures assigned projects comply with applicable codes and standards, including FAA Orders and directives., • ·Collaborates with other engineers and design professionals to create complete design packages., • ·Coordinates project activities with other agencies, contractors, utility companies, state and local government authorities, and the general public. Qualifications: • MUST HAVE a minimum of a Bachelors Degree in Electrical Engineering, • Must be eligible to work in the United States., • Must be able to obtain FAA Suitability / Public Trust Clearance Job Types: Full-time, Contract Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • 8 hour shift, • Monday to Friday Education:

Job DescriptionOur client is seeking a highly motivated Account Executive with a background in the aerospace industry to spearhead the business development efforts. This key role will involve formulating and implementing strategic plans to drive revenue growth within specific commercial and military aerospace sectors, both domestically and internationally. Responsibilities: • Forge and implement a detailed strategic plan to unearth and nurture opportunities unique to the aerospace sector., • Construct business cases with clear goals, including revenue benchmarks, expense forecasts, and expansion tactics., • Establish and track development objectives, orchestrate action plans, and assess the sales force’s efficacy., • Engage with various teams to synchronize efforts and realize company-wide goals., • Deepen client relationships, bolster sales support, and initiate lead generation within the aerospace domain., • Craft and present compelling sales pitches, proposals, and cost strategies., • Scrutinize market intelligence and trends to pinpoint fresh sales prospects., • A bachelor’s degree in engineering or business management; an MBA is highly regarded., • Over 5 years of high-level sales or strategic planning experience, with a decade or more in leadership roles., • Experience with DOD operations, maintenance, and contracting will be considered an asset., • Exceptional communication, presentation, and analytical abilities., • Proficiency in the MS Office suite and adeptness at interpreting financial reports., • Preparedness to travel up to 40% for business needs.Join a dynamic team and significantly impact business growth. Competitive compensation, including medical, dental, vision, and a 401k plan, is offered. Opportunity to be part of an innovative team is now open for application!

Job Description Under minimum supervision working from blueprints, sketches written and/or verbal instructions, sets up and performs the most diversified and complex progressive machining, fitting and assembly operations. Determines proper tooling and sequence of operations, and skillfully uses all machinists’ hand tools and machine shop measuring equipment in order to produce work to specifications. Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tool to be used. ESSENTIAL FUNCTIONS • Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tools to be used., • Must be able to skillfully use all machinist’s hand tools and measuring instruments., • Must be familiar with the machining of most materials., • Must be able to use advanced shop math, including trigonometry., • Moves parts to and from the work area., • Maintains good housekeeping in the work area., • Meets all safety requirements in the machine shop and follows all company policies., • Ability to operate standard and specialized equipment to produce prototype and/or production parts, • Ability to perform standard shop computations, using technical math, geometry and trigonometry., • Proficient use of set up and operation of CNC machining center., • Proficient use of tool and surface grinders, • Requires a High school diploma or equivalent education, • Requires the completion of an apprenticeship program or similar on the job experience of approximately four years or at least five years experience as a machinist., • Moderate physical activity. Salary Range:$33.63 To $48.57 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated magnet engineers to join its rapidly growing team. The magnet engineering roles will design, build, and test high temperature superconducting (“HTS”) magnets. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems. Key Responsibility Areas: • Rapidly design, build, and test HTS magnets, • Develop specifications for magnets based on system design and performance goals, • Optimize magnet design and run analysis using Multiphysics simulation software (e.g. Ansys EM, Structure, COMSOL, etc.), • Develop design tools, data analysis software, and algorithms using Python or similar, • Incorporate design for manufacturing principles and support first builds, • Produce design specifications and collaborate with vendors to get quotes and deliver hardware that meets qualifications, • Support the implementation of tooling and manufacturing, • Design and execute magnet testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Experience with magnets, cryogenics, vacuum systems, or transformer design, • Experience in design using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience with Ansys and/or COMSOL, • Experience specifying machining, welding, and fabrication requirements, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in physics, computer science, electrical engineering, mechanical engineering, materials engineering, or related fields, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $110,000-$180,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated test engineers to join its rapidly growing team. The test engineering roles will design, commission, and operate test facilities for high temperature superconducting (“HTS”) tapes, current leads, and magnets. HTS magnets and power distribution are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Rapidly design, commission, and operate test and measurement systems and facilities, • Develop specifications for the testing of HTS tapes, current leads, and magnets, • Develop and execute test processes and procedures, • Develop and integrate cryogenic, vacuum, and Instrumentation & Control systems, • Develop data analysis software and algorithms using Python or similar, • Provide integration and test support for—and occasionally develop—LabVIEW software, • Collaborate with vendors to procure measurement and test equipment, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Experience designing or testing superconductors, magnets, cryogenics, or vacuum systems, • Experience designing or testing high-pressure or cryogenic fluid networks, • Experience using CAD software (e.g. SOLIDWORKS, CATIA, NX, etc.)Experience specifying and implementing precision instrumentation and data acquisition systems, • Experience operating or developing LabVIEW-based test facilities, • Experience writing and executing test plans, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in electrical engineering, mechanical engineering, or related fields, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job Description Leading Aerospace Organization Is Growing and Looking for Motivated Persons to Join Our Team. Job Title: CNC Entry and Experienced / CNC Department Entry Level Pay: $25.42 To $26.59 Experience Level Pay: $26.59 To $30.13 Job Details: 8 Hour Shift Hourly Overtime Available Full-Time – 40 Hours / Week Benefits: Health Benefits 401k Yearly Raises Vacation Pay Holiday Pay Sick Pay Work Advancement Available Work Experience Requirements: Two (2) Years’ Experience in Cnc Setup and Machining. Able To Read and Understand Blueprints. Training Available. After Training, Able to Make Own Setups of Pre-Programmed Parts. Able To Work with Close Tolerances. Able To Perform Duties with Minimal Supervision Keeps Work Area Clean and Organized to Ensure Safety and Environmental Compliance. Education Requirements: High School Diploma or Equivalent Training. Job Description and Duties: Set Up and Run Production Jobs. Inspect And Verify First Piece of The Production Runs. Assist Engineering in Developing New Jobs. Observe Machine Operations to Detect Malfunctions or Out of Tolerance Machining. Perform Secondary Operations as Required. Kerns Manufacturing Corporation Is a Drug and Alcohol- Free Environment. Kerns Manufacturing Corporation Is an Equal Opportunity Employer.

Job Description Join a leading vacuum furnace engineering organization aimed at helping its customers reduce costs and maximize efficiency through the delivery of premium quality products that are personalized, technologically advanced and durable over time. These vacuum furnaces and ovens for heat treatment can be used in a variety of industries including defense contractors, healthcare, and aerospace As a Business Development Executive, you will assist with the expansion of products in the northeastern territory. The ideal candidate will have 3-5 years of experience selling heat treatment technology and machinery in a greenfield territory. Hunting new business is paramount for success in this role. Veterans are encouraged to apply! Position: Business Development Executive (New Accounts) Compensation: $80K base, $120K OTE Location: Northeast (Virginia to Maine) Travel: 4 days per week to northeastern territory Why You'll Love Working Here: * Untapped territory for selling, hunting and growth including uncapped commission * European based company with a culture that emphasizes long term strategic growth and progressive ideas * Trainings and company meetings in Italy headquarters (passport required) Responsibilities: * Identify, qualify, and pursue new business opportunities within the target market. * Analyze market trends, identify growth opportunities and execute targeted sales strategies within the Northeast region. * Focus on both the sale of new equipment as well as on service and after sales market * Develop and maintain strong, long-term relationships with key decision-makers at client organizations. * Conduct compelling technical presentations, effectively communicating the value proposition and addressing client concerns. * Present customized proposals that address the specific needs and challenges of each client. * Negotiate and close deals, ensuring customer satisfaction and achieving revenue targets. * Proven ability to manage the full sales cycle, from lead generation to deal closure. Preferred Skills & Experience: * Experience with the vacuum heat treatment industry. * Experience in selling custom solutions. * Experience with Salesforce and SAP Concur. * Proven ability to manage the full sales cycle, from lead generation to deal closure. * Willingness to travel extensively to client sites and trade shows/industry events and availability to travel to company headquarters when required MilSpec Talent is a boutique headhunting firm that helps our clients get connected with top talent in the industry. We work with mid-career, industry-experienced Veterans with 3-15 years of proven success in the private sector. For our contingency recruitment partners, we provide this value with minimal risk.

Job Description Xometry (NASDAQ: XMTR) powers the industries of today and tomorrow by connecting the people with big ideas to the manufacturers who can bring them to life. Xometry's digital marketplace gives manufacturers the critical resources they need to grow their business while also making it easy for buyers at Fortune 1000 companies to tap into global manufacturing capacity. Xometry is seeking an experienced and charismatic Senior Solutions Engineer for a critical customer-facing role. This role supports Sales by providing perspective, feedback, and sharing knowledge learned from the front lines of the aerospace and defense engineering and manufacturing community. This role is a unique blend of customer engagement, technical expertise, and project management. The Senior Solutions Engineering will report into the Pre-Sales Engineering community, which is dually led by Sales and Operations. This is a unique opportunity to join a dynamic and growing company at the forefront of digital manufacturing. If you are a successful, experienced, team-focused engineer with digital fluency and a sincere enthusiasm about the aerospace industry, this could be the right role for you. Responsibilities: • Customer Engagement and Sales: • Partner with Account Executives to drive account growth and retention, • Discover, illuminate, digest, organize and execute major projects, • Join Account Executives in onsite visits with customers when appropriate, • Proactively identify and address potential manufacturing challenges (including DFM), • Stay informed about upcoming customer projects and initiatives to ensure alignment with Xometry's capabilities, • Gather customer insights and feedback to inform sales strategies • Pre-Sales Engineering: • Assist Pre-Sales Engineering with knowledge gathering, digestion, and ultimately compiling correct and competitive quotes, • Combine customer knowledge, Xometry partner knowledge, and Xometry system knowledge to rapidly address customer needs and shepherd projects to delivery, • 10+ years of relevant experience in aerospace and defense engineering and manufacturing roles, • A bachelor's degree in Mechanical Engineering is required, • Experience using Xometry's services from a customer perspective. Partner perspective is a bonus, • Deep familiarity with the methods, materials, culture and products of organizations such as Lockheed Martin, Northrop Grumman, Blue Origin, Anduril, General Dynamics, Moog, SpaceX, • Strong understanding of manufacturing principles, including drawings and GDT, • Particularly strong experience in CNC machining. Composites, Plastics, Harnesses and Sheet Metal Fab are bonuses, • Familiarity with ISO9001, AS9100d, ITAR, NIST and other common and critical compliance and certification requirements, • Excellent communication, interpersonal, and problem-solving skills. This must extend into remote/digital environments, • Ability to travel to customer and/or partner sites as needed. 25%-35% travel is typical, • Mountain or Pacific home time zone preferred, • Experience with CRM systems such as Salesforce, • Proficiency in Google Suite and Microsoft Office Suite #LI-Remote Xometry is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. For US based roles: Xometry participates in E-Verify and after a job offer is accepted, will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job Description Job Title: Regional Account Manager – The New Haven Companies, Inc. DBA New Haven Moving Equipment (Prefer candidate lives within 50 miles of Carlstadt, NJ) The New Haven Companies is seeking a dynamic and driven Regional Account Manager to manage and grow our business across New Jersey, New York, and Pennsylvania. This role will focus on maintaining an existing book of business while identifying and executing opportunities for growth. The ideal candidate will have minimum of 12 months experience in outside sales and a working knowledge of the Moving & Storage industry. The role is remote, with in-person customer visits and regional travel. Key Responsibilities: - Manage and grow an inherited portfolio of clients within the Moving & Storage industry. - Establish, maintain, and nurture strong relationships with existing & new customers. - Identify new business opportunities and expand market presence within the assigned region. - Handle pricing negotiations, order entry, and inventory management to meet customer needs. - Optimize delivery routes to ensure efficiency and timeliness of service. - Regularly update and report to the Senior VP of Sales on business performance and sales strategies. - Collaborate with cross-functional teams to resolve customer inquiries and improve service. Qualifications: - Minimum of 12 months outside sales experience, preferably in the Moving & Storage industry. - Knowledge of inventory management and pricing strategies. - Excellent communication and relationship-building skills. - Proven ability to manage multiple accounts and meet sales targets. - Ability to work independently and stay self-motivated in a remote work environment. - Strong organizational skills with attention to detail. - Ability to travel regionally, with a valid driver's license. Benefits: - Competitive salary with opportunity to earn commission based on performance. - Work-from-home setup, including a company-provided cell phone and laptop. - Car allowance and reimbursement for travel expenses. - Opportunities for professional growth within a fast-paced, dynamic industry Would you like to join our great team ? There are great ways to apply for a position with our company. 1)Text NHMECareers to 97211 to learn more 2) send your resume to email address below 3) Apply in person at the location New Haven Moving Equipment 355 Michele Place Carlstadt, NJ 07072 • Principals only. Recruiters, please don't contact this job poster. Company DescriptionCelebrating over a 114 Years of Service For over a century, New Haven has been a family business that greatly values our relationships with our customers and the integrity, durability and workmanship of our products. Our products combine innovative designs, engineering excellence and top-of-the-line components and are reflective of our years of experience in and dedication to the various industries we serve. New Haven is dedicated to providing you and your company with the highest quality CORRUGATED, PACKAGING, MOVING EQUIPMENT and CARGO CONTROL available in the market. We are excited for our over 105 years in the business, during which time we have served the Moving, Transportation, Entertainment, Aeronautics, Health, and Aerospace industries, as well as Government Agencies, Universities, Libraries, Museums, and Corporations. New Haven began with a single horse-drawn wagon However, no matter how technologically advanced we have become (we were the first ever company to utilize lasers in our manufacturing of Furniture Moving Pads and our Cargo Control is now employed in outer space), we still retain a personalized orientation with our customers and care about your individual success. We have Multiple fully-stocked locations to serve you across the country, with experts in moving and product engineering happy to assist you.Celebrating over a 114 Years of Service\r\n\r\n\r\nFor over a century, New Haven has been a family business that greatly values our relationships with our customers and the integrity, durability and workmanship of our products.\r\n\r\nOur products combine innovative designs, engineering excellence and top-of-the-line components and are reflective of our years of experience in and dedication to the various industries we serve. New Haven is dedicated to providing you and your company with the highest quality CORRUGATED, PACKAGING, MOVING EQUIPMENT and CARGO CONTROL available in the market.\r\n\r\nWe are excited for our over 105 years in the business, during which time we have served the Moving, Transportation, Entertainment, Aeronautics, Health, and Aerospace industries, as well as Government Agencies, Universities, Libraries, Museums, and Corporations.\r\n\r\nNew Haven began with a single horse-drawn wagon However, no matter how technologically advanced we have become (we were the first ever company to utilize lasers in our manufacturing of Furniture Moving Pads and our Cargo Control is now employed in outer space), we still retain a personalized orientation with our customers and care about your individual success. \r\n\r\nWe have Multiple fully-stocked locations to serve you across the country, with experts in moving and product engineering happy to assist you.

Job Description Leading Aerospace Organization Is Growing and Looking for Motivated Persons to Join Our Team. Job Title: Lathe Entry and Experienced / Lathe Department Entry Level Pay: $25.42 To $26.59 Experience Level Pay: $26.59 To $30.13 Job Details: 8 Hour Shift Hourly Overtime Available Full-Time – 40 Hours / Week Benefits: Health Benefits 401k Yearly Raises Vacation Pay Holiday Pay Sick Pay Work Advancement Available Work Experience Requirements: Two (2) Years’ Experience in Lathe Setup and Machining. Experience In Threading and Grinding Preferred. Able To Read and Understand Blueprints. Training Available. After Training, Able to Make Own Setups. Able To Work with Close Tolerances. Able To Perform Duties with Minimal Supervision Keeps Work Area Clean and Organized to Ensure Safety and Environmental Compliance. Education Requirements: High School Diploma or Equivalent Training. Job Description and Duties: Set Up and Run Production Jobs. Inspect And Verify First Piece of The Production Runs. Assist Engineering in Developing New Jobs. Observe Machine Operations to Detect Malfunctions or Out-Of-Tolerance Machining. Perform Secondary Operations as Required. Kerns Manufacturing Corporation Is a Drug and Alcohol-Free Environment. Kerns Manufacturing Corporation Is an Equal-Opportunity Employer.

Job DescriptionAbout Nominal Nominal is building the software infrastructure powering the world’s most advanced hardware systems — from spacecraft and autonomous vehicles to next-generation industrial machines. Our platform ingests high-rate telemetry, validates complex autonomy software in real time, and enables engineers to iterate faster without sacrificing safety or precision. We’re a small, fast-moving team of engineers and operators who own problems end-to-end, work across disciplines, and thrive on challenges at the intersection of hardware and software. As a dual-use platform, we serve top-tier commercial and defense customers, including the U.S. Navy, United States Air Force, Shield AI, and Anduril. We’re backed by Sequoia, General Catalyst, Founders Fund, Lux Capital, and Lightspeed Ventures. Our team draws experience from SpaceX, Palantir, Anduril, Applied Intuition, and other leading companies — united by a common mission: enabling hardware engineers to push the boundaries of advanced technology with speed, safety, and precision. We're looking for an Instrumentation Engineer who will play a critical role in integrating Nominal's Connect platform with real-world test environments. You’ll be responsible for developing and deploying software interfaces for test stand instruments, flight computers, and control systems, ensuring seamless data acquisition and automation. This is a hands-on role, requiring both technical expertise and adaptability. You’ll work directly with customers, writing code that interacts with hardware in a variety of environments—including test stands, clean rooms, and industrial setups. Success in this role requires strong problem-solving skills, the ability to troubleshoot software-to-hardware integrations, and a passion for optimizing test and validation workflows.\uD83D\uDE80 What You’ll Do • Develop & Deploy: Write Python-based software to interface with customer test stand instruments using SCPI, PyVISA, PySerial, and NI-DAQmx., • Integrate Systems: Automate data collection and control processes for a wide range of aerospace and defense test environments., • Support Critical Missions: Work directly with customers to ensure their test setups are optimized and fully operational., • Problem Solve in Real Time: Troubleshoot hardware-software interfaces in dynamic, high-stakes environments., • Shape the Future: Define best practices for integrating Connect with real-world hardware, directly influencing Nominal’s product roadmap.\uD83D\uDD0D Who You Are, • Hands-on Hardware Experience: Comfortable working with data acquisition systems (DAQs), flight computers, and test stand instruments., • Software Proficiency: Strong Python skills, with experience in VISA, SCPI, Serial communication, and systems-level programming (C or Rust)., • Engineering Mindset: Able to read hardware manuals, interpret communication protocols, and implement effective software solutions., • Problem Solver: Thrive in dynamic environments where troubleshooting and persistence are key., • Technical Communication: Ability to translate complex system requirements into clear, actionable solutions., • Experience with Commercial Test Tools: Familiarity with LabVIEW, FlexLogger, or Veristand (nice-to-have)., • Experience in High-Performance Environments: Background in propulsion test stands, flight testing, or experimental physics labs., • \uD83C\uDFE5 100% coverage of medical, dental, and vision insurance, • \uD83C\uDFD6️ Unlimited PTO and sick leave, • \uD83C\uDF7D️ Free lunch, snacks, and coffee, • \uD83D\uDE80 Professional Development Stipend We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking an experienced, highly motivated Control Systems Engineer — LabView Developer to join its rapidly growing team. The Control Systems Engineer will have ownership of the design, development, and commissioning of the control system for complex equipment within Thea Energy’s stellarator fusion demonstration plant. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Work with a team of experts in developing controls for Thea Energy’s systems., • Architect, program, and document cutting-edge distributed Data Acquisition and Control (DAC) projects utilizing National Instruments hardware and software, such as LabVIEW, VeriStand, TestStand, SystemLink incorporating DAQ, PXI, cRIO, and RIO (FPGA) architectures., • Develop modular, readable, and reusable LabVIEW code, emphasizing reliability and continual improvement., • Create engineering tools, including both desktop and web-based testing applications., • Integrate VHDL and C codes into hardware-in-the-loop (HIL) systems, utilizing both NI and open-source hardware and software platforms., • Collaborate with hardware and systems engineers to define interfaces and requirements and ensure seamless integration of DAC/HIL solutions., • Troubleshoot and swiftly resolve issues in LabVIEW-based DAC/HIL systems., • Develop and execute comprehensive test plans., • Document design specifications, test procedures, and user manuals for automation and acquisition systems.Ideal Experience & Skillsets:, • Extensive experience as a control engineer on complex, large-scale systems., • Experience with magnetic confinement fusion, aerospace, or other highly technical industries., • B.S. or M.S. in Computer Science, Electrical Engineering, or a related physics or engineering discipline., • 5+ years of hands-on LabVIEW development experience; experience with VeriStand, TestStand and SystemLink., • Proven success in advanced LabVIEW programming, focusing on Data Acquisition and Control or HIL systems, within scientific, industrial, or research environments., • Proficiency with National Instruments hardware, including cRIO, PXIe, and expertise in both Windows and RT Linux environments., • Competency in HIL/SIL software architecture., • Proficient in the development and optimization of LabVIEW applications and LabVIEW Certification (Certified LabVIEW Developer and/or Architect) is advantageous., • Exceptional work ethic and communication skills.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job Description Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries. The CNC Programmer duties and responsibilities include but are not limited to the following: • Work directly with Manufacturing Manager, Machine Operators, Manufacturing Engineering, Design Engineering, and Production Control to produce good programs, keep machines running, and meet production needs., • Programming in Mastercam, • Processes and controls include, 2-3 axis mill/turning, Okuma/Hass/Mazak/FANUC., • CAD in Solidworks, • Read, analyze, and interpret blueprint drawings/specifications., • Tool and fixture selection, I.E End Mills, drills, inserts, custom fixtures, etc., • Organize and maintain programs, setup sheets, and revisions to both., • With machine operator or independently, conduct first run prove outs., • High School or equivalent. Tech school and / or college is a plus., • Minimum 5 years of machining experience preferred., • Minimum 2 years of programming experience preferred., • Be able to work closely with Manufacturing Manager to maintain shop machining schedules and meet production needs., • Be able to take part in employee relations at the shop level including adherence to labor contract provisions. Salary Range:$85,000.00 To $120,000.00 Annually We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job DescriptionAbout Nominal Nominal is building the software infrastructure that powers the world’s most advanced hardware systems — from spacecraft and autonomous vehicles to next-generation industrial machines. Our platform ingests high-rate telemetry, validates complex autonomy software in real time, and helps engineering teams iterate faster without sacrificing safety or precision. We’re a small, fast-moving team of engineers and operators who own problems end-to-end, work across disciplines, and thrive on solving challenges at the intersection of hardware and software. As a dual-use platform, we're serving top-tier commercial and defense customers, including the U.S. Navy, United States Air Force, Shield AI, and Anduril. We’re backed by top-tier investors — Sequoia, General Catalyst, Founders Fund, Lux Capital, and Lightspeed Ventures — who share our mission to accelerate innovation in mission-critical systems. Our team brings experience from SpaceX, Palantir, Anduril, Applied Intuition, and other leading companies, united by a common goal: enabling hardware engineers to push the boundaries of advanced technology with speed, safety, and precision. The Mission Ops role sits at the intersection of field deployment, high-impact customer problem-solving, and software product management. You’ll work closely with customers, iterate on solutions in real-time, and have the opportunity to impact vital systems and technologies across the aerospace and defense sectors.\uD83E\uDEE1 About the role • Own the outcome: From data ingestion to analysis to decisions, own the delivery of high-impact workflows that enable our customers to ship hardware faster and more reliably., • Collaborate & lead: Interface directly with customers, PMs, and internal engineers to deliver production-ready solutions in fast-turn cycles. Act as a trusted advisor and embedded partner—managing relationships, ensuring satisfaction, and expanding Nominal’s technical and strategic footprint within key defense accounts., • Train & enable: Guide technical end-users through hands-on training and onboarding—empowering teams to get the most out of the platform., • Solve in the field: Be a hands-on problem-solver during complex deployments and field operations. You're comfortable working on-site in dynamic, demanding, and sometimes classified environments., • Drive product improvement: Translate field feedback into actionable feature enhancements and platform improvements.\uD83C\uDFAF What we’re looking for, • Security clearance: Active Top Secret clearance or ability and willingness to obtain one., • DoD/federal experience: Minimum of 3 years supporting U.S. federal or DoD programs (uniformed, civilian, or contractor)., • Mission-driven, autonomous operator: Experience managing projects end-to-end with minimal oversight, especially in mission-critical contexts. You’ve operated in environments where reliability, latency, and uptime are mission-critical., • Customer-facing experience: Ability to communicate and collaborate with technical and non-technical stakeholders. Comfort operating autonomously on-site. Able to explain complex technical concepts to a range of audiences—from engineers to program managers., • Software and data experience: Interest and experience working with data and analytics technologies and scripting (e.g., Python, MATLAB, SQL)., • Hardware engineering background: education and experience in aerospace, mechanical, or electrical engineering., • Travel ready: Willing to travel up to 25–50% to support field deployments, particularly with government and DoD customers.⚡ Skills that supercharge us, • Test engineering: Familiarity with DAQs, DDS, telemetry frameworks and protocols (e.g. Ch10, MCAP, HDF5, TDMS). Prior work with test automation, CI/CD for hardware systems, or MIL-STD compliance workflows., • Data engineering: Proficiency in distributed data systems, DDIL resiliency, time-series data handling, and streaming frameworks (e.g. Kafka, Flink).\uD83D\uDE80 Why Nominal?, • Backed by world-class investors, • Mission-critical impact with high-profile customers, • Work with deeply technical peers from elite engineering backgrounds, • Build real systems that touch rockets, aircraft, and autonomous systems — not just dashboards✨ Benefits/Perks, • \uD83C\uDFE5 100% coverage of medical, dental, and vision insurance, • \uD83C\uDFD6️ Unlimited PTO and sick leave, • \uD83C\uDF7D️ Free lunch, snacks, and coffee, • \uD83D\uDE80 Professional Development Stipend

Job Description LEADING AEROSPACE ORGANIZATION IS GROWING AND LOOKING FOR MOTIVATED PERSONS TO JOIN OUR TEAM. Job Title: DEBURR ENTRY AND EXPERIENCED / DEBURR DEPARTMENT Entry Level Pay: $18.60 TO $24.09 Experience Level Pay: $24.09 TO $25.52 Job Details: 8 Hour Shift Hourly Overtime Available Full-Time – 40 Hours / Week Benefits: Health Benefits 401K Yearly Raises Vacation Pay Holiday Pay Sick Pay Work Advancement Available Work Experience Requirements: ONE (1) YEAR EXPERIENCE IN METAL PARTS FINISHING AND DEBURRING. EXPERIENCE IN HAND FINISHING OF PRECISION METAL PARTS A PLUS. ABLE TO READ AND UNDERSTAND BLUEPRINTS. TRAINING AVAILABLE. BE FAMILIAR WITH MANUAL HAND TOOLS AND MACHINERY AS NECESSARY. Able To Perform Duties with Minimal Supervision Keeps Work Area Clean and Organized to Ensure Safety and Environmental Compliance. Education Requirements: High School Diploma or Equivalent Training. Job Description and Duties: SET UP AND RUN PRODUCTION JOBS. UNDERSTAND AND DETERMINE HOW MUCH MATERIAL TO REMOVE. INSPECT AND VERIFY FIRST PIECE OF THE PRODUCTION RUNS. ASSIST ENGINEERING IN DEVELOPING NEW JOBS. ENSURE PARTS ARE FREE OF BURRS AND IMPERFECTIONS. PERFORM SECONDARY OPERATIONS AS REQUIRED. Kerns Manufacturing Corporation Is a Drug and Alcohol-Free Environment. Kerns Manufacturing Corporation Is an Equal Opportunity Employer.

Job DescriptionA World-Changing Company Palantir builds the world’s leading software for data-driven decisions and operations. By bringing the right data to the people who need it, our platforms empower our partners to develop lifesaving drugs, forecast supply chain disruptions, locate missing children, and more. The Role Are you passionate about engineering quality, efficiency, and increasing the impact of engineers around you? Software Engineers at Palantir build software at scale to transform how organizations globally use data. As a Software Engineer on Developer Productivity, you’ll identify, develop, and drive investments to improve the velocity and quality of our engineering, as well as bolster the happiness and productivity of other developers. The role spans a spectrum of areas, such as build and software supply-chain systems, platform runtime environments, telemetry relating concurrency, memory/performance optimizations, and monitoring/alerting. Your primary users will be other developers at Palantir. They will be empowered with the software you develop to build capabilities used by research scientists, aerospace engineers, intelligence analysts, and economic forecasters in countries around the world. There will be opportunities to contribute to open source software, including projects maintained by others that we leverage. You’ll work autonomously within a community that will support and challenge you as you grow to become a strong technical contributor and engineering leader. The team is hiring for Frontend and Backend engineers. Core Responsibilities We're hiring engineers who are passionate about solving real-world problems and empowering developers to do their work optimally. If you’re motivated to develop reliable, performant, scalable systems and tools, here are some examples of the types of work you’d get to do: • Define and build standard practices for how services are operated and observed throughout their deployment• Build libraries and tooling for defining service APIs and the RPC interactions between microservices; like the conjure ecosystem• Unify frontend build and CI infrastructure across all of Palantir• Help developers understand and adhere to development practices by building great tools and development processes• Push Palantir to the cutting edge of software supply chain securityTechnologies We Use • A variety of languages, including Java, Go, and TypeScript, • Open-source databases like Cassandra, Lucene, Elasticsearch, • Open-source libraries/frameworks like GraphQL, Undertow, Jackson, and Log4j, • Industry-standard build tooling, including Gradle, Webpack, CircleCI, and GitHubWhat We Value, • Expertise and depth of understanding of a technology or problem space. Embracing, centralizing, and abstracting complexity away from our users in order to expose simple, powerful APIs for consumers that solve otherwise incredibly complex technical problems., • Ability to understand how technical decisions impact individuals who will use what you’re building and drive to super-power those people., • Empathy for developer and operator workflows and productivity., • Awareness of recent industry practices and open source advancements., • Active US Security clearance, or eligibility and willingness to obtain a US Security clearance is beneficial but not necessary.What We Require, • 2+ years of software engineering experience, preferably in fields such as Computer Science, Mathematics, Software Engineering, Physics, • Strong coding skills with demonstrated proficiency in programming languages, such as Java, C++, Python, JavaScript/TypeScript, or similar languages, • Great problem solving skills with ability to dive into and navigate existing complex systems, • Familiarity with data structures, storage systems, cloud infrastructure, and other technical tools

Job DescriptionA World-Changing Company Palantir builds the world’s leading software for data-driven decisions and operations. By bringing the right data to the people who need it, our platforms empower our partners to develop lifesaving drugs, forecast supply chain disruptions, locate missing children, and more. The Role Software Engineers at Palantir build software at scale to transform how organizations around the world use data. In this role, you’ll have an opportunity to grow more quickly than you ever envisioned as you contribute high-quality code directly to Palantir Gotham: products that are deployed at some of the most important institutions across the government, defense and non-profit sectors. You'll create features used by research scientists, aerospace engineers, intelligence analysts, and economic forecasters in countries around the world. Palantir's Product Development organization is made up of small teams of Software Engineers, each focusing on a specific aspect of a product. For example, you might join a team that builds geospatial mapping tools for mission critical operations, or a component of the Gotham release infrastructure. We encourage communication and collaboration among teams to share context, skills, and experience, so you'll also have the opportunity to learn about other business areas. Core Responsibilities As a Software Engineer, you are involved throughout the product lifecycle - from idea generation, design, and prototyping, to execution and shipping, all while also being paired with a mentor dedicated to your growth and success. You'll collaborate closely with technical and non-technical counterparts to understand our customers' problems and build products that tackle them. One of the most effective ways to understand what our users need is to meet them. You may receive an opportunity to tour the assembly line at an auto-manufacturer or join a counter-terror analyst at their desk to really understand their mission and difficulties. SWE principles include: • Ownership: We see projects through from beginning to end in spite of obstacles we may encounter.• Collaboration: We work internally with people from a variety of backgrounds — such as other Software Engineers, Product Managers, Designers and Product Reliability Engineers. We also partner with our business development teams (Forward Deployed Engineers, Deployment Strategists) in order to understand and solve our customers' problems.• Trust: We trust each other to effectively handle time and priorities, and don't micromanage. We want people to have the space to think for themselves, while feeling supported by their team. Technologies We Use It doesn’t matter what languages you know when you join us; what matters is that you can write clean, effective code and learn new languages quickly. Our software is constantly evolving, so we need engineers who can do the same. Alongside peers that bring diverse experience - whether you’re a former university Teaching Assistant, switched to computer science recently, or are a hackathon enthusiast — you'll build your skills to apply the best technology to solve a given problem. Right now, we use: • A variety of languages, including Java and Go for backend and Typescript for frontend• Open-source technologies like Cassandra, Spark, Elasticsearch, React, and Redux• Industry-standard build tooling, including Gradle and GitHubWhat We Value • Ability to communicate and collaborate with a variety of individuals, including engineers, users and non-technical team members., • Willingness to learn and make decisions independently, and the ability to ask questions effectively.What We Require, • Active US Security clearance or eligibility and willingness to obtain a US Security clearance., • Engineering background in fields such as Computer Science, Mathematics, Software Engineering, and Physics., • Familiarity with data structures, storage systems, cloud infrastructure, front-end frameworks, and other technical tools., • Experience coding in programming languages, such as Java, C++, Python, JavaScript, or similar languages.To apply, please submit the following:, • An updated resume / CV - please do so in PDF format.

Job DescriptionAbout Nominal Nominal is building the software infrastructure that powers the world’s most advanced hardware systems — from spacecraft and autonomous vehicles to next-generation industrial machines. Our platform ingests high-rate telemetry, validates complex autonomy software in real time, and helps engineering teams iterate faster without sacrificing safety or precision. We’re a small, fast-moving team of engineers and operators who own problems end-to-end, work across disciplines, and thrive on solving challenges at the intersection of hardware and software. As a dual-use platform, we're serving top-tier commercial and defense customers, including the U.S. Navy, United States Air Force, Shield AI, and Anduril. We’re backed by top-tier investors — Sequoia, General Catalyst, Founders Fund, Lux Capital, and Lightspeed Ventures — who share our mission to accelerate innovation in mission-critical systems. Our team brings experience from SpaceX, Palantir, Anduril, Applied Intuition, and other leading companies, united by a common goal: enabling hardware engineers to push the boundaries of advanced technology with speed, safety, and precision. As a Systems-Level Software Engineer, you’ll architect and implement the real-time backbone of Nominal’s test automation and simulation platform. You’ll work across the full stack of hardware-in-the-loop (HIL) systems, from deterministic task scheduling and bus I/O to distributed telemetry and timing synchronization — ensuring our software behaves predictably under the tightest latency budgets. If you thrive at the boundary between software and the physical world — where timing matters as much as correctness, this role is for you.\uD83D\uDE80 About the Role • Design and implement hard real-time components for data acquisition, control, and simulation using C++ and/or Rust., • Develop deterministic communication layers for CAN, EtherCAT, serial, and MIL-STD-1553 or similar field buses., • Architect the core HIL runtime, including task schedulers, timing controllers, and synchronization primitives., • Integrate with embedded targets, flight computers, and sensor networks to validate autonomy and control software., • Collaborate with our infrastructure and visualization teams to connect real-time execution with distributed telemetry, playback, and analysis pipelines., • Profile, benchmark, and harden low-latency systems to meet microsecond-level timing guarantees., • Establish testing and verification standards for real-time correctness and timing determinism across the platform.⚡ Skills That Accelerate Us, • 4+ years of systems-level or embedded software development in C++ (C++17 or newer) or Rust, with a deep understanding of real-time constraints and deterministic scheduling., • Experience with RTOSs such as QNX, RTEMS, FreeRTOS, VxWorks, or Linux PREEMPT-RT., • Background in HIL or SIL testing, real-time control loops, or simulation frameworks for aerospace, automotive, or robotics., • Strong grasp of hardware interfaces, timing jitter, interrupt handling, and low-level I/O., • Familiarity with signal acquisition, control systems, and sensor fusion concepts., • Bonus: experience with LabVIEW, NI TestStand, PXI/DAQ systems, or integration with external test equipment., • Bonus: knowledge of time-synchronized networking (PTP/NTP), DDS, or real-time middleware (ROS 2, RTI Connext)., • Ability to debug at multiple layers — from driver-level to distributed telemetry — and to reason clearly about timing and causality.✨ Benefits/Perks, • \uD83C\uDFE5 100% coverage of medical, dental, and vision insurance, • \uD83C\uDFD6️ Unlimited PTO and sick leave, • \uD83C\uDF7D️ Free lunch, snacks, and coffee, • \uD83D\uDE80 Professional Development Stipend

Job DescriptionA World-Changing Company Palantir builds the world’s leading software for data-driven decisions and operations. By bringing the right data to the people who need it, our platforms empower our partners to develop lifesaving drugs, forecast supply chain disruptions, locate missing children, and more. The Role Software Engineers at Palantir drive large-scale transformation through data, AI and world-leading infrastructure that supports mission-critical workloads. In this role, you’ll have an opportunity to grow more quickly than you ever envisioned as you contribute high-quality code directly to: • Environment Platform: a Kubernetes-based PaaS spanning hundreds of production clusters• Apollo: secure, fleet-wide deployment and change-management for complex microservice suites• Signals: our full suite of observability and alerting tools Core Responsibilities As a Software Engineer at Palantir, you’ll own every phase of the product lifecycle—from generating ideas and designing prototypes to executing features and shipping releases—while being paired with a dedicated mentor who champions your growth. You’ll work hand-in-hand with both technical and non-technical colleagues to uncover real customer problems and deliver solutions that address them. To gain firsthand insight, you might sit side-saddle at a military exercise or partner directly with vendors using Palantir’s Apollo & Rubix to put our software into the hands of warfighters and government workers. SWE principles include: • Ownership: We see projects through from beginning to end in spite of obstacles we may encounter.• Collaboration: We work internally with people from a variety of backgrounds — such as other Software Engineers, Product Managers, Designers and Product Reliability Engineers. We also partner with our business development teams (Forward Deployed Engineers, Deployment Strategists) in order to understand and solve our customers' problems.• Trust: We trust each other to effectively handle time and priorities, and don't micromanage. We want people to have the space to think for themselves, while feeling supported by their team. Technologies We Use It doesn’t matter what languages you know when you join us; what matters is that you can write clean, effective code and learn new languages quickly. Our software is constantly evolving, so we need engineers who can do the same. Alongside peers that bring diverse experience - whether you’re a former university Teaching Assistant, switched to computer science recently, or are a hackathon enthusiast — you'll build your skills to apply the best technology to solve a given problem. Right now, we use: • A variety of languages, including Java and Go for backend and Typescript for frontend• Open-source technologies like Kubernetes, Cilium, Envoy, Grafana, React, and Redux• Industry-standard tooling, including Gradle and GitHub, and agentic tools like Windsurf & ClineWhat We Value • Ability to communicate and collaborate with a variety of individuals, including engineers, users and non-technical team members., • Willingness to learn and make decisions independently, and the ability to ask questions effectively., • Active US Security clearance, or eligibility and willingness to obtain a US Security clearance.What We Require, • Engineering background in fields such as Computer Science, Mathematics, Software Engineering, and Physics., • Familiarity with data structures, storage systems, cloud infrastructure, front-end frameworks, and other technical tools., • Experience coding in programming languages, such as Java, C++, Python, JavaScript, or similar languages.To apply, please submit the following:, • An updated resume / CV - please do so in PDF format.

Job DescriptionA World-Changing Company Palantir builds the world’s leading software for data-driven decisions and operations. By bringing the right data to the people who need it, our platforms empower our partners to develop lifesaving drugs, forecast supply chain disruptions, locate missing children, and more. The Role Software Engineers at Palantir build software at scale to transform how organizations use data. Our Software Engineers are involved throughout the product lifecycle, from idea generation, design, prototyping, and production delivery. You will collaborate closely with technical and non-technical teammates to understand our customers' problems and build products that solve them. We encourage movement across teams to share context, skills, and experience, so you'll learn about many different technologies and aspects of each product. Engineers work autonomously and make decisions independently, within a community that will support and challenge you as you grow and develop, becoming a strong technical contributor and engineering leader. Our Product Development organization is made up of small teams of Software Engineers. Each team focuses on a specific aspect of a product. Our infrastructure teams are responsible for the lowest layers of our software stack, often focused on database technologies, distributed systems, large scale data systems, security, and application infrastructure. As a Software Engineer on infrastructure working on our Foundry platform, you'll contribute high-quality code to underpin Palantir Foundry and Gotham with performant, secure, and scalable building blocks, enabling products deployed to the most important institutions in the public and private sector. You'll build the foundational capabilities that power our products used by research scientists, aerospace engineers, intelligence analysts, and economic forecasters, in countries around the world. We’re hiring engineers who are passionate about solving real-world problems and empowering both developers and end-users to work optimally. If you’re motivated to develop reliable, performant, and scalable systems, and to design robust APIs and primitives, this role offers the opportunity to make a significant impact on our products and the people who use them. Frontline Foundry Software Engineers may be offered the opportunity to Frontline, an exclusive program unlike any other. This unique, short-term assignment involves being embedded with customers, allowing you to work directly with users and gain firsthand insight into how our products are used and the challenges our customers face. Unlike traditional engineering roles, Frontline immerses you in complex, ambiguous problems, empowering you to deliver impactful solutions across some of the world’s most important industries and institutions. Some of our most successful products were built on the factory floor, addressing real-world problems for the world's most important institutions. These products were developed by some of our most successful product engineers, who began their careers in roles aligned with Frontline responsibilities, gaining a deep understanding of both our technology and our customers. Frontliners operate across a broad spectrum of responsibilities, much like a startup CTO. They work in small teams to own the end-to-end execution of high-stakes projects. This spectrum ranges from discussing architecture and building custom web apps to conducting workshops with users and strategizing with customer executives. No two days are alike, as each day is diverse and impactful. By witnessing how customers engage with Foundry and experiencing these pain points firsthand, you’ll gain unique insights that feed directly back into our development process, helping to refine and enhance our products.Core Responsibilities • Building a performant search and indexing ecosystem for complex granularly permissioned data, • Contributing to open-source data processing libraries, integrating the latest innovations to achieve performance gains, • Building the distributed systems that power large scale compute workloads, orchestrating and efficiently scheduling hundreds of thousands of containers every hour, • Designing architecture and opinionated APIs to keep application developers on the happy path, • Tracing and performance observability in high scale distributed microservice architectures, • Building reliant, performant, and scalable systems for storage, auth, or asset serving to enable other product teams to build robust applications without deep domain expertise in the underlying systems, • Automating the deployment, management, and operations of complex distributed systems like Cassandra, Elasticsearch, Kafka, and more across different environmentsTechnologies We Use, • Different backend languages, including Java, Rust, and Go, • Open-source technologies like Cassandra, ElasticSearch, Spark, Kafka, Kubernetes, Flink, • Industry-standard build tooling, including Gradle and GitHubWhat We Value, • Demonstrated ability to collaborate and empathize with a variety of individuals. Able to iterate with users and non-technical stakeholders and understand how technical decisions impact them., • Ability to learn new technology and concepts, even without in-depth experience. Experience developing and managing highly-available distributed systems is beneficial, but not required., • Bias towards quality and thoughtful about edge cases (“anything that can go wrong will go wrong”); writes code that is defensive against all possibilities., • Builds solutions and APIs with users in mind while maintaining a high engineering bar. Seeks to centralize and abstract complexity away from our users in order to expose simple, powerful APIs for consumers., • Active US Security clearance, or eligibility and willingness to obtain a US Security clearance is beneficial, but not necessary.What We Require, • Engineering background in Computer Science, Mathematics, Software Engineering, Physics or similar field., • Strong coding skills with demonstrated proficiency in programming languages, such as Java, C++, Python, Rust, or similar languages., • Familiarity with storage and data processing systems, cloud infrastructure, and other technical tools.

Job DescriptionA World-Changing Company Palantir builds the world’s leading software for data-driven decisions and operations. By bringing the right data to the people who need it, our platforms empower our partners to develop lifesaving drugs, forecast supply chain disruptions, locate missing children, and more. The Role Software Engineers at Palantir build software at scale to transform how organizations around the world use data. In this role, you’ll have an opportunity to grow more quickly than you ever envisioned as you contribute high-quality code directly to Palantir Gotham, Palantir Apollo, or Palantir Foundry: products that are deployed at some of the most important institutions across the public and private sectors. You'll create features used by research scientists, aerospace engineers, intelligence analysts, and economic forecasters in countries around the world. Palantir's Product Development organization is made up of small teams of Software Engineers, each focusing on a specific aspect of a product. For example, you might join a team that builds a Foundry front-end application, or a component of the Gotham release infrastructure. We encourage communication and collaboration among teams to share context, skills, and experience, so you'll also have the opportunity to learn about other business areas. Core Responsibilities As a Software Engineer, you are involved throughout the product lifecycle - from idea generation, design, and prototyping, to execution and shipping, all while also being paired with a mentor dedicated to your growth and success. You'll collaborate closely with technical and non-technical counterparts to understand our customers' problems and build products that tackle them. One of the most effective ways to understand what our users need is to meet them. You may receive an opportunity to tour the assembly line at an auto-manufacturer or join a counter-terror analyst at their desk to really understand their mission and difficulties. SWE principles include: • Ownership: We see projects through from beginning to end in spite of obstacles we may encounter.• Collaboration: We work internally with people from a variety of backgrounds — such as other Software Engineers, Product Managers, Designers and Product Reliability Engineers. We also partner with our business development teams (Forward Deployed Engineers, Deployment Strategists) in order to understand and solve our customers' problems.• Trust: We trust each other to effectively handle time and priorities, and don't micromanage. We want people to have the space to think for themselves, while feeling supported by their team. Technologies We Use It doesn’t matter what languages you know when you join us; what matters is that you can write clean, effective code and learn new languages quickly. Our software is constantly evolving, so we need engineers who can do the same. Alongside peers that bring diverse experience - whether you’re a former university Teaching Assistant, switched to computer science recently, or are a hackathon enthusiast — you'll build your skills to apply the best technology to solve a given problem. Right now, we use: • A variety of languages, including Java and Go for backend and Typescript for frontend• Open-source technologies like Cassandra, Spark, Elasticsearch, React, and Redux• Industry-standard build tooling, including Gradle and GitHubWhat We Value • Ability to communicate and collaborate with a variety of individuals, including engineers, users and non-technical team members., • Willingness to learn and make decisions independently, and the ability to ask questions effectively., • Active US Security clearance, or eligibility and willingness to obtain a US Security clearance.What We Require, • Engineering background in fields such as Computer Science, Mathematics, Software Engineering, and Physics., • Familiarity with data structures, storage systems, cloud infrastructure, front-end frameworks, and other technical tools., • Experience coding in programming languages, such as Java, C++, Python, JavaScript, or similar languages.To apply, please submit the following:, • An updated resume / CV - please do so in PDF format.

Civil Engineering, Aviation and Aerospace Component Manufacturing, and Design Services.

Job Description Leading Aerospace Organization Is Growing and Looking for Motivated Persons to Join Our Team. Job Title: Milling Entry and Experienced / Milling Department Entry Level Pay: $25.42 To $26.59 Experience Level Pay: $26.59 To $30.13 Job Details: 8-Hour Shift Hourly Overtime Available Full-Time – 40 Hours / Week Benefits: Health Benefits 401k Yearly Raises Vacation Pay Holiday Pay Sick Pay Work Advancement Available Work Experience Requirements: Two (2) Years’ Experience in Milling Setup and Machining. Experience In Operating Bridgeport’s, Jig Bores, Drill Press, Etc. Able To Read and Understand Blueprints. Training Available. After Training, Able to Make Own Setups. Able To Work with Close Tolerances. Able To Perform Duties with Minimal Supervision. Keeps Work Area Clean and Organized to Ensure Safety and Environmental Compliance. Education Requirements: High School Diploma or Equivalent Training. Job Description and Duties: Set Up and Run Production Jobs. Inspect And Verify First Piece of The Production Runs. Assist Engineering in Developing New Jobs. Observe Machine Operations to Detect Malfunctions or Out-Of-Tolerance Machining. Perform Secondary Operations as Required. Kerns Manufacturing Corporation Is a Drug and Alcohol-Free Environment. Kerns Manufacturing Corporation Is an Equal-Opportunity Employer.

Supporting the department's day-to-day operations, including being the backup for departmental credit card purchases and statement approver. Ability to learn new technological systems in an efficient manner.

Aerospace Engineer Job Duties: Contributes to the design, manufacturing, and testing of aircraft and aerospace products. Evaluates designs with regard to engineering principles, customer requirements and en

Aviation and Aerospace Component Manufacturing, Defense and Space Manufacturing, and Transportation Equipment Manufacturing. Proven track record of partnering with manufacturing and engineering. Quality Assurance, Manufacturing, and Engineering.

Areas of emphasis include, but are not limited to: spacecraft design and engineering, autonomous flight systems, smart/adaptive materials for aerospace systems, hypersonic materials, generative AI for aerospace systems, remote sensing and communications, hypersonic fluid dynamics and control, advanc

Job Description Responsibilities will include proper operation of equipment, component level & final cleaning of assemblies. Some assembly work will take place when required. Following is a summary of the essential functions for this job. Other duties may be performed, both major and minor, which are not mentioned below. Specific activities may change from time to time. • Clean, prepare, assemble & package product., • Operate equipment., • Inspect and track parts and processes during production., • Ensure quality of final product., • Maintain the work area and equipment in clean and orderly condition., • Report defective material or questionable condition to the department supervisor., • Contribute and adhere to safety and quality., • Communicate status of operation in a timely manner to management including any safety, • and/or process problems., • Must be able to follow detailed instructions., • Must possess excellent communication and interpersonal skills., • Must wear appropriate clean room attire., • Must be able to sit or stand for long periods of time., • Must be authorized to work in the US., • Previous clean room experience a plus., • Emphasizes personal and professional growth. Keep knowledge and skills current., • Be able to handle and inspect small and delicate components., • Focus on work and minimize interruptions., • Prioritize, work well under time pressure, and focus on work in midst of noise., • Maintain a good, cooperative and respectful attitude., • Comply with safety laws and regulations., • Ability to inspect and manipulate minute items using a variety of tools., • Must be able to perform basic physical tasks such as lifting 50lb., • Must be able to read and write in English., • Open to working weekend and overtime as needed, • High school diploma / GED or equivalent required. Valcor Engineering Corporation is looking for individuals who are highly skilled, diligent, practical, productive, reliable, inventive, self-motivated, patient, conscientious, problem solvers, organized, cooperative, flexible and positive. Character and attitude are extremely important. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Seeking candidates with an aerospace engineering degree and experience with engine technology. The ideal candidate is seeking an opportunity to use their deep technical knowledge to work exclusively on patent prosecution and holds undergraduate and/or graduate degrees in aerospace engineering or mec

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance Position Overview The Quality Assistant will provide direct, hands-on support to ensure that all products meet the required quality standards for defense and manufacturing operations. This role focuses on practical inspection, testing, and documentation tasks on the production floor. The ideal candidate will work closely with operators, supervisors, and the Quality Control Manager to verify product conformity, identify non-conformances, and support continuous improvement of production processes. Key Responsibilities Inspection and Testing Perform in-process and final inspections of mechanical and electrical assemblies using measurement tools (calipers, micrometers, gauges, etc.). Verify compliance with engineering drawings, specifications, and customer requirements. Conduct sample checks, visual inspections, and functional testing as needed. Document inspection results in ERP and quality logs with high accuracy. Quality Process Support Support root cause investigations by providing inspection data and observations from the shop floor. Assist in preparing non-conformance reports (NCRs) and tracking corrective actions. Verify reworked or repaired items meet acceptance criteria before release. Maintain proper identification, segregation, and documentation of defective materials. Technical Documentation & Compliance Ensure all inspection records, traveler sheets, and logs are filled correctly and filed in compliance with ISO, ITAR, and AS9100 requirements. Assist in preparing documentation for internal audits and customer inspections. Follow and enforce quality standards, safety requirements, and lean manufacturing practices. Production & Shipping Interface Coordinate with production supervisors to ensure timely inspections without delaying workflow. Support final quality checks before products are released to shipping/receiving. Monitor and record product quality trends to support continuous improvement efforts. Qualifications Education: Minimum Associate Degree required (Bachelors or equivalent technical degree is preferred). Experience: 2+ years in quality control, inspection, or manufacturing environment (defense/aerospace preferred). Hands-on experience with inspection tools and gauges. Knowledge of ISO 9001, AS9100, or similar quality management systems is desirable. Familiarity with ERP systems for quality recording. Strong attention to detail, technical mindset, and ability to work independently on the production floor. Good communication skills for interacting with operators, engineers, and managers.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated magnet engineers to join its rapidly growing team. The magnet engineering roles will design, build, and test high temperature superconducting (“HTS”) magnets. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems. Key Responsibility Areas: • Rapidly design, build, and test HTS magnets, • Develop specifications for magnets based on system design and performance goals, • Optimize magnet design and run analysis using Multiphysics simulation software (e.g. Ansys EM, Structure, COMSOL, etc.), • Develop design tools, data analysis software, and algorithms using Python or similar, • Incorporate design for manufacturing principles and support first builds, • Produce design specifications and collaborate with vendors to get quotes and deliver hardware that meets qualifications, • Support the implementation of tooling and manufacturing, • Design and execute magnet testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Experience with magnets, cryogenics, vacuum systems, or transformer design, • Experience in design using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience with Ansys and/or COMSOL, • Experience specifying machining, welding, and fabrication requirements, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in physics, computer science, electrical engineering, mechanical engineering, materials engineering, or related fields, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

ABOUT The most secretive of Navy vessels, a submarine requires a select community of specially trained professionals to operate its classified, highly advanced hardware.The Sailors in the Submarine Electronics Computer Field (SECF) work with a submarine’s sonar, weapons, communications, and naviga