Aerospace engineering jobs in New York, New YorkCreate job alerts

Job Description The Source Inspector, (SI) is responsible for performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection. The source inspection may include reviewing all paperwork relating to the product at hand. This includes operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly. The SI will also verify FAI’s to AS9102 for accuracy and completeness. The SI must be familiar with hand tools and gaging techniques. The SI will also be fluent in B/P interpretation and GD&T. Source Inspection will occur at end customer’s suppliers’ location. The SI will travel to these locations. Job Responsibilities: • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • Knowledge of CMM Inspection process, • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • Reads, interprets, and utilizes Quality policies, procedures, blueprints, and other documentation, • Process warehouse materials, • Rely on instructions and pre-established guidelines/procedures to perform the functions of the job, • Support positive corrective actions and identification of root cause, • Other duties as assigned.Required Skills, • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • MS Outlook, and EXCEL experience, • Experience with hand measurement gages, conduct conventional inspection to engineering requirements, • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Valid drivers license and auto insurance required.Additional Desired Skills:, • Prior practical experience and implementation of Quality inspection tools and equipment., • Experience in RCCA, and problem solvingGeneral Requirements, • Ability to handle complex situations and solve complex problems, • Ability to work effectively under pressure to meet deadlines, • Ability to press and analyze technical and business information, • Ability to work in a team environment with strong communication skills (verbal and written), ability to interact via telephone, email with co-workers, • Ability to remain seated for up to 5 hours at a time, • Fluent English – reading and writing is required, • Professionalism, integrity, and exceptional attention to detail, • Strong independent decision-making skills; excellent analytical skills and professional judgment, • Excellent interpersonal, written, and verbal communication skills, • Must be able to simultaneously manage several objectives, • Must be detail oriented, organized, and self-motivatedAdditional Qualifications (Preferred):, • 3+ years’ experience as a quality inspector or technician., • 3+ years’ experience in an aerospace manufacturing facility, • 3+ years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation, • Proficient with Microsoft Office products, • Effective communication skills, • Detail oriented, • Any combination of education and experience may be considered, • The General Vision Acuity Test shall be performed by an Oculist, Optometrist, or other professionally recognized person. The following requirements shall apply. • Near Vision – Eyes meets Orthorater 8 (95% or Jaeger #2 at 12 inches), • Far vision – Eyes meets Orthorater 4 (76%) or Snellen Chart 20/50, • Color Perception – 6 of 9 Orthorater plates US or International citizenship or permanent residence status required depending on work location. • Valid Driver’s License, • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement (.70/mile 2025) when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • Overnight trips - Up to $75, • Leaving home after 4 pm $40, • Federal rate mileage reimbursement (.70/mile 2024) when driving personal vehicles on company business, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded) Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Powered by JazzHR 87TEEMFWQL

Job Description CNC Machine Maintenance Engineer - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The CNC Machine Maintenance Engineer position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive, and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service. Must have experience with Vacuum Braze Ovens., • Perform simple machinist duties and responsibilities., • Perform mechanical skills, including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on machines, equipment, and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Technical Capacity., • Good Troubleshooting Ability., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Initiative., • Valid Driver’s License., • Experience with the maintenance of CNC Machines or Vacuum Braze Ovens EDUCATION AND/OR EXPERIENCE • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience., • 2+ years of manufacturing experience; some hydraulic, pneumatic, mechanical, and industrial skills with PLC experience, Industrial and Commercial electric, and HVAC., • AA in mechanical or electrical Engineering or a Certificate in Analytical Troubleshooting preferred. 5+ years in manufacturing/facilities maintenance preferred. PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $125,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description iRocket is developing reusable, fully autonomous small launch vehicles to deliver more frequent, lower-cost access to space. We work across propulsion, structures, integration, and test domains, building toward an era of responsive launch systems. The Role: We are seeking a Manufacturing Technician to support the fabrication, assembly, and integration of structural and mechanical subassemblies for our rocket hardware. You’ll work closely with manufacturing and quality engineers to build reliable flight hardware in line with strict aerospace standards. • Manufacture and assemble flight hardware using methods such as drilling, fastening, bonding, and other mechanical processes, • Use precision calibrated tools (e.g. torque wrenches, micrometers, calipers), • Read and interpret technical drawings, blueprints, and work instructions, • Follow procedures, specifications, and test instructions to ensure hardware is built to design requirements, • Collaborate with manufacturing engineers and quality personnel to develop, refine, and document work instructions, • Ensure production tasks are completed on schedule, safely, and to the required quality, • High school diploma, GED, or equivalent work experience, • Strong communication and collaboration skills, • Ability to interact effectively (verbal and written) with engineering, production, and quality teams, • Experience in New Product Introduction (NPI) or development environments, • Precision drilling experience (tolerance ~ ±0.001 in), • Experience in aerospace, aviation, military, medical device, or other high-reliability industries, • Ability to read and interpret advanced technical drawings, manuals, and reports, • Proficient use of precision measuring instruments, • Experience working in cleanroom or controlled environments, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionIMS Recruiting is seeking a First Article Inspection (FAI) Specialist for a leading aerospace manufacturer. This role is critical to ensuring compliance with AS9102 standards and supporting manufacturing excellence. The FAI Specialist will be responsible for performing and documenting first article inspections, collaborating with cross-functional teams, and driving quality assurance in line with aerospace industry requirements.About the Role The FAI Specialist will play a key part in ensuring aerospace components and assemblies meet customer and regulatory specifications, while supporting audits, continuous improvement, and quality initiatives. Key Responsibilities * Perform First Article Inspections (FAIs) on aerospace components and assemblies in accordance with AS9102 Rev. C. * Create, review, and maintain FAI reports (Form 1, Form 2, Form 3). * Collaborate with manufacturing, engineering, and suppliers to resolve discrepancies and gather documentation. * Interpret engineering drawings, CAD models, and technical data packages (GD&T, ASME Y14.5). * Use precision measuring tools (calipers, micrometers, CMMs, etc.) to verify dimensional conformance. * Record/document non-conformances and support root cause analysis and corrective actions. * Ensure traceability of materials, special processes, and certifications. * Support audits (internal, customer, regulatory) with FAI documentation. * Submit completed FAI packages to customers via Net-Inspect. Qualifications Required: * High school diploma or GED (Associate’s or technical degree preferred). * 1–2+ years of FAI or Quality Assurance experience in aerospace or defense. * Strong knowledge of AS9102 Rev. C and aerospace quality standards. * Proficiency in reading/interpreting engineering drawings and GD&T. * Skilled with inspection tools (calipers, micrometers, CMMs, etc.). * Experience with CMM software (PC-DMIS, Zeiss Calypso, etc.) is a plus. * Proficiency in MS Office and FAI tools (Net-Inspect, InspectionXpert). * Strong attention to detail and documentation accuracy. Preferred: * Experience in AS9100D-certified environments. * Knowledge of special processes (anodizing, NDT, welding, heat treat). * Understanding of supplier quality and PPAP/FAI submissions. * Certifications in Six Sigma, Lean, or Quality (CQI, CQT). Why Join? * Work with a mission-critical aerospace supplier ensuring compliance and quality excellence. * Opportunity to grow in aerospace quality assurance and gain exposure to AS9100/AS9102 best practices. * Competitive compensation and full benefits package.

Job Description Join Weiss-Aug – A Leader in Precision Manufacturing and Innovation Weiss-Aug, is a leading provider of advanced manufacturing and engineering solutions with advanced facilities across the U.S. and Mexico for over 50 years. Why Join Us? At Weiss-Aug we are driven by a commitment to excellence, innovation, and continuous improvement. As a recognized leader in the industrial and commercial sectors, specializing in high-volume metal stamping, thermoplastic molding, and value-added assembly solutions for the medical, aerospace & defense, automotive, interconnect, telecommunications and consumer goods industries, we take pride in cultivating a collaborative and forward-thinking work environment. QC Inspector – 2nd Shift Shift Schedule: 2:00 pm - 10:30 pm Responsibilities- Completes visual and mechanical inspections based on control plan, drawing, spec sheets and procedures. Able to expedite and prioritize workload. • Works with die setters, engineers, and/or managers in meeting the company quality policy by providing written and verbal communication related to specifications and data in a clear concise manner., • Quarantines product, performs transactions in ERP system, creates and maintains detailed records of inspections on various forms, prepares data packages for shipments., • Works with QC Inspector III, engineers, or managers. Supports management initiatives to improve the efficiencies such as creating and updating key quality documents such as visual standards and inspection instructions. Requirements, • High School graduate or equivalent, • 1-3 years of inspection experience in close tolerance manufacturing, • Must have a good understanding of GD&T to be able to interpret part specifications., • Must be able to use skillfully metrology equipment such as all hand gauges, microscopes, comparators., • Must be organized and able to maintain a clean workspace., • Must have the ability to use a computer with minimal training. Pay Range: $22-$25/hr Other Benefits Include * Medical, Dental and Vision * 401 (k) with company match * Holiday, Vacation and Sick Time * Tuition Reimbursement * Health Savings Accounts (HAS) * Flexible Spending Accounts (FSA) * Cigna Wellness Incentive Program * Employee Assistance Program (EAP) * Short Term Disability * Group Life and Accidental Insurance * Sun Life – Accident, Critical Illness, and Hospital Indemnity Insurance * Smoking Cessation Program * Pet Insurance US Pay Transparency The base salary for this role will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. If your salary requirements exceed the advertised range and you remain interested in Weiss-Aug, we encourage you to apply. Weiss-Aug is an Equal Opportunity/Affirmative Action Employer. Applicants will be considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, protected veteran status, disability, or any other characteristics protected by applicable federal, state, or local law.

Job Description Join a Leader in Precision Engineering Valcor Engineering is a trusted name in aerospace, nuclear, and defense sectors. As one of the largest providers of fluid control products, our legacy is built on precision, reliability, and innovation. We're currently looking for a Mechanical Inspector to join our quality team. If you have a mechanical mindset, strong attention to detail, and enjoy working in a hands-on environment—this is the role for you! Under general supervision, the Inspector position requires the mechanical ability to perform first piece and sample inspection. Using standard inspection equipment, solves standard inspection problems and lays out of complicated parts, casting, and assemblies. Makes decisions concerning minor inspection problems, using complicated blueprints and specifications. ESSENTIAL FUNCTIONS • Read and Comprehend complicated blueprints, sketches, written and/or verbal specifications., • Proficient in the use of mechanical inspection equipment; including micrometers, gages, go/no gages, optical comparator, CMM and other inspection measuring tools., • Accurately document the results of the inspections and other data., • May be Level I Operator or Level II Inspector in one or more liquid penetrant, ultra-sonic or eddy currents., • Under direct supervision, may assist in the calibrating of gauges., • Moves parts and materials to and from work area., • Must pass required eye tests, and will be subject to the random drug and alcohol testing program., • Follow company policies (Safety, Attendance, etc.), and maintains a clean well-organized work area., • Can easily accept direction and complete tasks in a timely manner with minimal supervision., • Requires a high school diploma or equivalent, advanced technical education preferred., • Inspection experience and working knowledge of measurement instruments required., • Aerospace and or Nuclear industry experience beneficial., • Good written/verbal communication skills and Inter-acts with organizational team members and other departments in a professional manner., • Advanced mechanical aptitude desired. Cutting-Edge Projects: Be part of critical work in aerospace, defense, and energy. * Team-Focused Culture: Work with a skilled, collaborative group of industry pros. * Career Growth: Opportunities to develop and move up in a growing company. * Comprehensive Benefits: Competitive pay, healthcare, 401(k), paid time off, and more. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job DescriptionSenior Design Engineer Needed For Leading Aerospace Manufacturer This Jobot Job is hosted by: Kevin Finlay Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $100,000 - $150,000 per year A bit about us: We have unceasingly continued to design and manufacture fluid control components, motion control components, and systems for some of the most demanding applications our customers have. Why join us? If you are an experienced Senior Design Engineer, then please apply! Do you want to work with some of the nation’s best Clients AND enjoy time at home w/ family? We do too! • Meaningful Work!, • Best in Class Company!, • Competitive Compensation Package!, • Complete Benefits Package!, • Flexible Work Schedules!, • Accelerated Career Growth!, • Fun Company Activities!, • Many More! Job Details We are seeking a dynamic and highly skilled Permanent Design Engineer to join our Aerospace team. This individual will be responsible for the design and development of aerospace valves, pumps, and related components. The ideal candidate will have a strong background in product development and management, with a particular emphasis on the aerospace industry. This is an exciting opportunity to play a critical role in the development of innovative aerospace solutions that will have a significant impact on the future of the industry. Responsibilities: 1. Design and develop aerospace valves, pumps, and related components in accordance with industry standards and customer specifications., 2. Utilize engineering software such as AutoCAD, SolidWorks, and Inventor to create detailed 3D models and technical drawings of product designs., 3. Apply knowledge of GD&T principles to ensure accuracy and precision in product designs., 4. Collaborate closely with the product management team to define product specifications and requirements, and to ensure that product designs meet these requirements., 5. Conduct thorough product testing and analysis to evaluate the performance and reliability of product designs, and to identify and resolve any design issues., 6. Work with the manufacturing team to oversee the production of product designs, and to ensure that products are manufactured to the highest quality standards., 7. Stay up-to-date with the latest developments and trends in the aerospace industry, and incorporate this knowledge into product designs. Qualifications: 1. Bachelor’s degree in Engineering or a related field., 2. Minimum of 8 years of experience in the engineering industry, with a focus on product development and management., 3. Extensive experience with engineering software such as AutoCAD, SolidWorks, and Inventor., 4. Strong knowledge of aerospace valves, including butterfly valves and solenoid valves., 5. Experience with hydraulic and pneumatic systems., 6. Familiarity with ASME standards., 7. Excellent problem-solving skills, with a strong attention to detail., 8. Strong communication and teamwork skills, with the ability to collaborate effectively with diverse teams., 9. Ability to manage multiple projects simultaneously and to meet tight deadlines., 10. Passion for innovation and a desire to stay at the forefront of the aerospace industry. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.

Job Title: Project Manager – US [Remote] Location: National, All of United States Level: Senior Management Role Summary: As the Project Manager, you will oversee complex projects from initiation through to completion, ensuring they align with business objectives and meet high standards of quality. In this role, you will provide strategic leadership, directing project planning, execution, and performance across data-center and other regulated industries, including Nuclear, Oil & Gas, Power Generation, and Aerospace. Your focus will be on delivering supply only projects within scope, on time, and within budget, while also managing client relationships, leading cross-functional teams, and fostering operational excellence. Key Responsibilities: • Project Strategy & Planning: Develop and implement comprehensive project plans, including scope, objectives, timelines, and budget management, ensuring alignment with company goals and client expectations., • Stakeholder & Client Engagement: Act as the primary contact for project stakeholders, fostering strong relationships with clients, suppliers, and internal teams to ensure project alignment and satisfaction including site visits and site surveys across the United States., • Risk & Issue Management: Identify potential project risks, develop mitigation strategies, and resolve issues proactively to minimize impact on project outcomes., • Performance Tracking & Reporting: Oversee project performance metrics, providing regular updates to senior leadership, tracking milestones, KPIs, and financial metrics, and implementing improvements as needed., • Team Leadership & Development: Lead cross-functional project teams, fostering collaboration, accountability, and professional growth while promoting company values., • Quality Assurance: Ensure projects meet quality standards and industry regulations, collaborating with internal quality assurance teams to maintain compliance., • Resource Allocation & Budget Management: Optimize project resources and maintain strict adherence to budgets, making adjustments to ensure efficiency and cost-effectiveness., • Process Improvement & Innovation: Introduce innovative project management tools and best practices to enhance project delivery and team productivity. Qualifications: • Education: Bachelor’s degree in Project Management, Engineering, Business Administration, or related field; Master’s degree preferred., • Experience: 8+ years of project management experience in a related industry, with a proven record of delivering complex, high-value projects on time and within budget., • Certification: PMP (Project Management Professional) certification required; additional certifications in Agile or Lean methodologies preferred. Excellent communication and client relationship skills Proficient in project management software Familiarity with industry standards and regulatory compliance requirements Ability to manage multiple priorities in a fast-paced environment Flexibility to work across time zones to coordinate with global teams Reports to: Vice President, North America Success Metrics: • Achieving high client satisfaction scores and positive stakeholder feedback, • Delivering Supply Only projects on time, within budget, and in compliance with quality standards, • Driving team performance with clear objectives, accountability, and a focus on continuous improvement, • Fostering innovation within the team to contribute to company growth and operational efficiency

Job Description Class B Driver /Warehouse associate (one Position) Employment type: full-time Our Company is looking for a CDL B Driver/Warehouse Associate (one position) to become a part of an amazing team that will feel like family. We are happy to say that our Drivers are valued and home every night. As part of this dual position as a Driver and a Warehouse Associate, you will drive a truck or van with capacity of over or under 26, 000 GVW, primarily to deliver or pick up merchandise or packages within a specified area. You may need to load or unload the truck. As a Warehouse Associate, you will have a variety of responsibilities so things will never be boring! You will verify and keep records on incoming and outgoing shipments, prepare items for shipment, arrange by customer pick-up, and participate in assembling, addressing, and shipping materials. New Haven offers our employees benefits (medical, dental, optical, life insurance) We also offer and HSA, Flexible Spending, and a matching 401(k) Applicants must have a clear CDL B license. Would you like to join our New Haven Team? Text NHME Careers to 97211 to learn more • Principals only. Recruiters, please don't contact this job poster.Company DescriptionCelebrating over a 114 Years of Service For over a century, New Haven has been a family business that greatly values our relationships with our customers and the integrity, durability and workmanship of our products. Our products combine innovative designs, engineering excellence and top-of-the-line components and are reflective of our years of experience in and dedication to the various industries we serve. New Haven is dedicated to providing you and your company with the highest quality CORRUGATED, PACKAGING, MOVING EQUIPMENT and CARGO CONTROL available in the market. We are excited for our over 105 years in the business, during which time we have served the Moving, Transportation, Entertainment, Aeronautics, Health, and Aerospace industries, as well as Government Agencies, Universities, Libraries, Museums, and Corporations. New Haven began with a single horse-drawn wagon However, no matter how technologically advanced we have become (we were the first ever company to utilize lasers in our manufacturing of Furniture Moving Pads and our Cargo Control is now employed in outer space), we still retain a personalized orientation with our customers and care about your individual success. We have Multiple fully-stocked locations to serve you across the country, with experts in moving and product engineering happy to assist you.Celebrating over a 114 Years of Service\r\n\r\n\r\nFor over a century, New Haven has been a family business that greatly values our relationships with our customers and the integrity, durability and workmanship of our products.\r\n\r\nOur products combine innovative designs, engineering excellence and top-of-the-line components and are reflective of our years of experience in and dedication to the various industries we serve. New Haven is dedicated to providing you and your company with the highest quality CORRUGATED, PACKAGING, MOVING EQUIPMENT and CARGO CONTROL available in the market.\r\n\r\nWe are excited for our over 105 years in the business, during which time we have served the Moving, Transportation, Entertainment, Aeronautics, Health, and Aerospace industries, as well as Government Agencies, Universities, Libraries, Museums, and Corporations.\r\n\r\nNew Haven began with a single horse-drawn wagon However, no matter how technologically advanced we have become (we were the first ever company to utilize lasers in our manufacturing of Furniture Moving Pads and our Cargo Control is now employed in outer space), we still retain a personalized orientation with our customers and care about your individual success. \r\n\r\nWe have Multiple fully-stocked locations to serve you across the country, with experts in moving and product engineering happy to assist you.

Job Description iRocket is building the future of reusable launch via advanced manufacturing. We seek an Additive Manufacturing Engineer to lead the design, process development, and qualification of additively-manufactured rocket hardware. The Role • Develop, qualify, and produce additive-manufactured (AM) metal parts for propulsion, structures, and subsystems., • Optimize AM designs: design for additive manufacturing (DfAM), thermal-mechanical analysis, post-process workflows, non-destructive inspection, and certification., • Collaborate with materials, structures, manufacturing, and design teams to reduce cost, lead time, and improve performance., • Set process controls, parameter development, build-book documentation, qualification plans, and manufacturing readiness., • Bachelor’s degree in Materials, Mechanical, or Aerospace Engineering., • 2+ years of experience in metal additive manufacturing, preferably in aerospace, defense, or complex systems manufacturing., • Experience with DfAM, CAD/CAE, thermal/structural analysis, post-processing, inspection, and qualification workflows., • Familiarity with powder-bed fusion, directed-energy deposition, hot isostatic pressing (HIP), heat treatments, and AM part certification., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description As iRocket advances toward frequent launches, we need a Test Engineer focused on hardware and launch infrastructure to validate subsystems, ground support equipment, integration, and launch-site readiness. The Role • Lead test programs for launch-pad hardware, ground support systems (GSE), avionics integration, and vehicle subsystem checkout., • Develop test plans, write procedures, execute dry-runs, and perform full system validation., • Troubleshoot hardware anomalies, manage data acquisition and reporting, work with cross-functional teams to close issues., • Support launch operations: pre-launch checkouts, integrated systems tests, post-launch data reviews, and lessons learned., • Bachelor’s degree in Engineering (Mechanical, Aerospace, Electrical, or related)., • 2+ years of test engineering experience in aerospace, launch, or hardware integration/test environment., • Experience with instrumentation, data acquisition systems, hardware integration, and test stand operations., • Comfortable working in a fast-paced environment with evolving requirements and launch cadence goals., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles to enable responsive, lower-cost access to space. We combine advanced propulsion, reuse, and sustainable propellant technologies to push the frontier of commercial space. The Role: We are seeking a Propulsion Engineer to join our propulsion team and contribute to the design, development, testing, and qualification of propulsion systems for our launch vehicles. You will work closely with integration, test, design, and manufacturing teams to bring propulsion systems from concept to flight readiness. • Support design, development, and testing of propulsion systems (e.g. liquid rocket engines, pressure-fed or pump-fed systems, component-level systems), • Participate in test campaigns, including planning, instrumentation, execution, and post-test analysis, • Develop and maintain test procedures, control sequences, and configuration files for propulsion testing, • Troubleshoot issues in propulsion subsystems (fluid, mechanical, thermal) during testing and integration, • Collaborate with cross-functional teams (mechanical, thermal, controls, electronics, systems) to ensure subsystem integration, • Perform calculations and simulations to support sizing, performance prediction, and optimization, • Support Test Readiness Reviews (TRRs), Failure Review Boards, and design reviews, • Implement continuous improvements to increase test efficiency, safety, and reliability, • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related discipline, • 2+ years of experience in propulsion, test, or fluid/thermal systems development and testing, • Familiarity with liquid or hybrid rocket engine systems, fluid dynamics, thermodynamics, and heat transfer, • Experience with instrumentation, sensors, data acquisition, control systems, • Proficiency with scripting or programming (Python, MATLAB, etc.), • Ability to read and interpret engineering drawings, P&IDs, and technical specifications, • Strong problem-solving, data analysis, and communication skills, • Ability to work in multidisciplinary teams and in a fast-paced, evolving environment, • Experience with cryogenic fluids, high-pressure systems, or oxidizer/fuel systems, • Experience with CAD, simulation tools (CFD, thermodynamics, structural), or propulsion modeling, • Familiarity with propulsion test stands, plumbing, valve systems, or turbomachinery, • Experience in space, launch vehicle, or high-reliability systems, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is scaling its autonomous launcher capabilities, and we’re looking for an Avionics Engineer to design, integrate, and verify guidance, navigation, control, and flight-software systems for our reusable launch vehicles. The Role • Design and integrate avionics architectures: flight computers, sensors, guid-nav-control, actuation subsystems, and vehicle communication systems., • Produce schematics, PCB layouts, thermal/mechanical analysis, and firmware/FPGA integration where applicable., • Perform system-level verification: hardware-in-loop, software-in-loop, vibration/thermal/EMI testing, and flight-qualification., • Work with software, propulsion, structures, and systems teams to close requirements and flight readiness., • Bachelor’s degree in Electrical, Aerospace, or Computer Engineering., • 3+ years of avionics or embedded systems engineering in aerospace, defense, or complex systems environment., • Experience with PCB design, signal conditioning, sensor integration, flight-software verification, and test systems., • Knowledge of guidance/navigation/control algorithms, FPGA/embedded firmware, and hardware validation., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Calibrates, tests, and repairs electrical, mechanical, electromechanical, and electronic measuring, recording, and indicating instruments and equipment for conformance to established standards, and assists in formulating calibration standards. Calibrates and tests controlling, indicating, and measuring instruments and devices, such as monochromators, pressure regulators, tachometers, temperature controls, and thermometers, to ensure specified operating performance, using hand tools, testing and calibrating instruments and equipment, and precision measuring instruments. Responsibilities • Figures sequence of testing and calibration procedures for instruments and equipment, according to blueprints, schematics, technical manuals, and other specifications., • Prepares standard and special purpose laboratory equipment to test, evaluate, and calibrate other instruments and test equipment., • Disassembles and reassembles instruments and equipment, using hand tools, and inspects components for defects., • Measures parts for conformity with specifications, using micrometers, calipers, and other precision instruments., • Aligns, repairs, replaces, and balances component parts and circuitry., • Devises formulas to solve problems in measurements and calibrations., • Assists engineers in formulating test, calibration, repair, and evaluation plans and procedures to maintain precision accuracy of measuring, recording, and indicating instruments and equipment., • Writes inspection and calibration reports and maintains accurate records. Sets up inspection gauges for others., • Writes Calibration Work Instructions and Trains employees how to calibrate gauges., • Manages and Monitors gauges for outside or onsite calibration, • Previous experience in Gage Track/Gage Calibration software is preferred., • Must be able to Calibrate Mechanical, Fluid, Pressure and Electrical gauges and tooling, • Must be able to communicate with Gauge Vendors, • Write PO’s, • Interact with all Departments in Facility ✔️ Be part of a company with decades of aerospace excellence ✔️ Competitive pay & full benefits package ✔️ Work on innovative aerospace components used around the world ✔️ Opportunities for training and professional growth ✔️ Clean, collaborative, and safety-focused work environment Salary Range:$30.00 To $45.00 Hourly We also have Technicians available for repair, testing and production support ... Support global aviation with your expertise in calibration, precision repair and testing. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job DescriptionDescriptionThe Process Engineering group at Knowles Precision Devices is responsible for supporting and maintaining the flow of production material for the Thin Film Product Line. The Knowles Thin Film Product Line includes RF and Microwave components for applications in telecom, aerospace and defense markets. This position is a hands-on engineering role, providing daily support to operations to maintain the flow of parts, implementing new equipment and supporting a range of improvement projects. This is a fast paced position, that expects time management to support short term and long term needs of the company. Salary and title dependent on experience. Key Responsibilities • Maintain and develop Job Instructions and Work Instructions for existing and new processes, • Collect and analyze data on yields and process capability, • Provide technical skill training to operators, • Provide process support to minimize production down-time in assigned areas, • Participate in project based teams, • Support equipment troubleshooting and maintenance, • Participate in Material Review Board (MRB) for Root Cause investigations, • May support contract review and process rulebook maintenance, in support of new product designs, • 3+ years of experience supporting laser drilling/cutting equipment in a manufacturing environment, • Bachelors of Science in engineering/science, or equivalent experience, • Experience reading and understanding CAD engineering drawings using GD&T, • Experience measuring and validating workmanship to drawing specification, with optical measurement devices, • Ability to generate machine motion control programs (i.e. G-Code), • Experience authoring job instructions and work instructions, • Proficiency in statistical methods (DOE, SPC, FMEA) and data analysis tools (e.g., JMP, Minitab, MATLAB, Python, SQL), • Strong written and verbal communication skills, communicating to both operators and management, • Willingness to train others and work as a member of inter-disciplinary teams, • Must be able to perform lab duties in an ISO certified clean room, meeting gowning, ESD, and EHS requirements., • Medical, dental and vision insurance plans, • Prescription Drug Plans, • Basic Life Insurance, • 401k plan with company match, • Tuition Reimbursement Program, • Security Clearance Incentive Program, • Employee Referral Program, • Overtime opportunities, • Alternate work schedules available, • PTO (10 days) and NYS Sick and Safe Leave, • Paid HolidaysExciting Onsite Perks:, • Free Starbucks coffee available at our café, • Free access to our Fitness Center, • Fresh food is available for purchase in the cafeteria store. ITAR Statement: Please note that this position may require access to technical data controlled under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants must be U.S. persons (citizens, lawful permanent residents, or individuals granted refugee or asylee status) or have the necessary authorization to access controlled technical data. Compliance with ITAR and EAR regulations is a condition of employment. Notice to Staffing Agencies, Search Firms and Recruitment Agencies: The recruitment process at Knowles is managed through the Human Resources department. Knowles does not accept resumes submitted from 3rd party agencies outside of our system. To submit resumes, 3rd party agencies will need to be a pre-approved vendor with a valid contract in place, be actively engaged by Knowles to recruit for a specific position and have agency log in credentials to submit candidates to our careers portal. Please do not submit resumes via e-mail, through our external website or directly to our employees. Any resumes submitted in this way become the property of Knowles and will not be eligible for any placement fee.

Job DescriptionAbout Nominal Nominal is building the software infrastructure powering the world’s most advanced hardware systems — from spacecraft and autonomous vehicles to next-generation industrial machines. Our platform ingests high-rate telemetry, validates complex autonomy software in real time, and enables engineers to iterate faster without sacrificing safety or precision.We’re a small, fast-moving team of engineers and operators with deep experience from companies like SpaceX, Palantir, Anduril, and Applied Intuition. We’re backed by Sequoia, General Catalyst, Founders Fund, Lux Capital, and Lightspeed Ventures — and we serve a range of top-tier commercial and defense customers, including the U.S. Navy, Air Force, Shield AI, and Anduril.At Nominal, we enable hardware engineers to push the boundaries of technology — with speed, safety, and precision. As an Area Director, you’ll play a critical leadership role in driving Nominal’s go-to-market success. You'll be on the front lines of selling a modern software platform into hardware-centric organizations from aerospace to defense to industrial automation.This is not a traditional SaaS sales role. You’ll own complex, high-value enterprise deals, build deep technical relationships, and guide customers through a sophisticated solution-selling journey. You’ll also help build the foundation of our sales team and culture, contributing to our overall sales strategy and operating model.\uD83D\uDCBC What You'll Do • Own the Team Build and recruit a high performing team focused on pipeline generation, value driven discovery and closing Guide deals from initial outreach to signed contract, aligning stakeholders at every level., • Build the Relationship Engage with technical buyers, executives, and frontline engineers alike. Host executive dinners, attend key industry events, and stay tapped into your customers' priorities and challenges., • Craft the Strategy Develop strategic account plans that target first-mover programs, then expand across the enterprise. Understand the internal dynamics and identify champions who will advocate for Nominal., • Sell to Outcomes Frame our value in terms of customer outcomes — speed, safety, and deployment scale. You’ll translate complex engineering goals into a compelling software value proposition., • Partner Effectively Leverage the broader Nominal team — from engineering to operations — to support technical discovery, demos, integration scoping, and infosec reviews. Collaborate cross-functionally to deliver tailored collateral and messaging., • Maintain the Forecast Own a robust book of business, tracking long-lead opportunities and delivering accurate, data-driven forecasts that align with company goals., • Build the Team Help define what “great” looks like for our sales function. Mentor early hires, shape sales processes, and build a winning, ownership-oriented culture.\uD83D\uDD0D What We’re Looking For, • Enterprise Sales Experience 3+ years of experience in Leadership, particularly in enterprise or strategic sales, ideally closing seven-figure technical deals into industrial, defense, or hardware-centric companies., • Solution Seller You’re a consultative, outcome-oriented seller who thrives in multi-stakeholder environments. You know how to pull together the right internal team to win., • Technical Fluency You’re comfortable speaking to engineers, architects, and IT leaders. Bonus if you’ve sold into environments with complex telemetry, testing workflows, or autonomy software., • Relationship-Driven You build lasting, trust-based relationships. You understand customer org charts, incentive structures, and how to align stakeholders., • Industry Familiarity You’ve sold data, infrastructure, or developer platforms into industrial/manufacturing, aerospace, defense, or heavy industry. You know how these companies operate., • Leadership & Team Player You lead by example and lift up those around you. You’ve mentored other sellers and are excited to help build a high-performance sales org., • Ready to Roll You’re energized by travel, on-site demos, and face-to-face meetings. You’re hands-on and biased toward action.⚡️ Skills That Supercharge Us, • CRM & Sales Stack Fluency: HubSpot, Salesforce, LinkedIn Sales Navigator, ZoomInfo, Common Room, Notion, Slack, • Technical Tools Familiarity: AWS, Azure, Databricks, Snowflake, MATLAB, Grafana, • Data Proficiency: SQL, Python, Pandas, Timescale, Spark, Kafka, Beam, Flink, • Engineering Background: Degree or experience in mechanical engineering or similar field✨ Benefits/Perks, • \uD83C\uDFE5 100% coverage of medical, dental, and vision insurance, • \uD83C\uDFD6️ Unlimited PTO and sick leave, • \uD83C\uDF7D️ Free lunch, snacks, and coffee, • \uD83D\uDE80 Professional Development Stipend

Job Description About the Company Our client is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. They are on a mission to create a limitless source of zero emission energy for a sustainable future. This is a direct hire, permanent placement position for a client of AdAstra Talent Advisors. About the RoleOur client is seeking experienced, highly motivated magnet engineers to join its rapidly growing team. The magnet engineering roles will design, build, and test high temperature superconducting ("HTS") magnets. HTS magnets are foundational components of the company's planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you'll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Responsibilities • Rapidly design, build, and test HTS magnets, • Develop specifications for magnets based on system design and performance goals, • Optimize magnet design and run analysis using Multiphysics simulation software (e.g. Ansys EM, Structure, COMSOL, etc.), • Develop design tools, data analysis software, and algorithms using Python or similar, • Incorporate design for manufacturing principles and support first builds, • Produce design specifications and collaborate with vendors to get quotes and deliver hardware that meets qualifications, • Support the implementation of tooling and manufacturing, • Design and execute magnet testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersRequirements, • At least a bachelor's degree in physics, computer science, electrical engineering, mechanical engineering, materials engineering, or related fields, • 5-10+ years of relevant experience, • Experience with magnets, cryogenics, vacuum systems, or transformer design, • Experience in design using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience with Ansys and/or COMSOL, • Experience specifying machining, welding, and fabrication requirements, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one's own, • Full-time, on-site positionBenefit Highlights, • Competitive salary, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • Open vacation policies, • Work-life balanceCompensation is determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. Equal Opportunity Our client is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. About AdAstra AdAstra Talent Advisors is a headhunting and talent advising firm focused on the Climate, Space, and Defense sectors of Hard Tech. We specialize in pairing highly technical and executive talent with some of the world’s leading Hard Tech startups. At AdAstra, we catalyze the innovations that future generations depend on by placing the right people in the right seats. Our dedicated work enables inconceivable technology from Earth, to the stars. And it’s all because of trailblazing talent like you - those driven to do what’s never been done before. We care about long term relationships with both candidates and companies. Even if the role we initially discuss isn’t a perfect fit, it’s likely we’ll have something relevant to share with you in the future. Join us on our journey by following along via LinkedIn! CEO, Seyka Mejeur | LinkedIn profile CTO / COO, Brian Mejeur | LinkedIn profile AdAstra Talent Advisors | LinkedIn profile AdAstra Website

Job Description Director of Manufacturing - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree in engineering, Manufacturing Engineering preferred, or other technical-related discipline is required; MBA or other relevant advanced degree is preferred., • Minimum 8 years of experience in a manufacturing environment, including managing salaried and hourly staff., • Minimum 5 years of experience using continuous improvement methodologies, LEAN, Six Sigma, etc. is preferred. SUMMARY OF POSITION The Director of Manufacturing Engineering (ME Director) is responsible for supporting business goals, including product cost and quality, schedule adherence, and timely delivery to meet customer demand. It is a hands-on position responsible for ensuring that manufacturing processes, tooling, and equipment support the business's Safety, Quality, Delivery, and Productivity goals. This ME Director plays an integral part in plant operations, special projects, and is responsible for developing and maintaining a motivated team and for supporting budgetary and production targets. The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain, and Production in support of the departmental objectives. SUPERVISORY RESPONSIBILITIES • The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain, and Production in support of the departmental objectives. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Responsible for developing the standard processes used to manufacture heat exchangers, including selection and definition of all tooling, equipment, fixtures, and anything else related to the process. The team is responsible for ensuring all production processes are defined using the standard work formats and templates, as well as creating any training documents required to ensure production operators can perform the work in accordance with the documented standard., • Design and develop any tooling or fixtures needed to support the production processes., • Support the Operations team in the achievement of KPI’s related to shipping volume targets, on-time delivery, past due backlog, customer lead time, efficiency, utilization, and overtime premium expense., • Support and drive continuous improvements in manufacturing metrics, including quality, yields, cycle time, productivity, and cost. Promote process improvement, LEAN manufacturing methodologies, and 5S processes., • Implement and drive continuous improvement activities through the implementation ofthe change management process and best practices., • Timely and thorough implementation of engineering changes. Actively partner in the creation and review of engineering changes when needed., • Establish and monitor overall performance for product and quality standards; recommend process improvements/quality control programs. Recommend changes in work practices to improve production standards and product quality., • Ensure the ME team is properly deployed to support the daily needs of the business, new product introduction, cost reduction projects, or other duties as needed., • Oversee the Operational Excellence (cost reduction) plans for the site. Coordinate and manage the projects at a tactical level and develop the project tracking tools to report out to senior management., • Coordinate, review, and present data for the purchase of capital equipment and tooling improvements to audiences at various levels of the company., • Provide technical support and recommendations to both internal and external customer technical/quality teams regarding process improvements, non-conforming parts, defects, and repair/rework., • Author annual performance reviews and develop continuing education and advancement paths for the entire department., • Provide oversight for manufacturing activities in our Mexico facility., • Minimal travel expected. Potential travel to a facility in Mexico in support of overall business objectives. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Must possess solid analytical skills in forecasting and anticipating production needs and capabilities., • Must be able to prioritize workload in a multitasking environment, short-term tactical, along with longer-term strategic activities., • Must be able to work independently with minimum supervision and have the ability to interact positively and motivate others, • Excellent verbal and written communication skills; fluency in Spanish is preferred., • Experience with MRP systems, preferably Oracle., • Proficient in Microsoft Office programs, including Teams, Word, Excel, and PowerPoint., • Willingness to work a flexible schedule to get the job done., • Exceptional communication skills; promoting teamwork and a positive work environment., • Experience should include build-to-order manufacturing management experience in medium volume/high-mix production environments, preferably in the military or aerospace industries., • Demonstrated history of successful change management and implementation of operational excellence improvements such as lean manufacturing, demand flow, and six sigma., • Strong ability to communicate with all levels of the organization from the production floor to the executive office; strong interpersonal, leadership, & organizational skills., • Familiarity with assembly, welding, brazing, machining, and testing processes is desired., • Demonstrated knowledge of and familiarity with a variety of lean tools and methodologies, including, but not limited to:, • VSM, Standard Work, Pull Systems & Kanban, Integrated Business Planning, Daily Management, 5S/Visual, • Management, 3P, SMED, TPM, Variation Reduction, and Six Sigma. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $175,000 to $200,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job DescriptionSenior Mold Designer & ToolmakerLocation: Westchester County, NY Type: Full-Time Salary: $90,000 - $100,000+ About the RoleDesign precision tooling for components that power Mars rovers, fighter aircraft, and submarine systems. We manufacture ultra-miniature magnetic components for aerospace and defense applications where failure is not an option. If you're passionate about extreme precision and want your work to matter, this is your opportunity. What You'll Do • Design ultra-precision injection molds for miniature transformers, inductors, and power supplies (some as small as 0.31" x 0.31"), • Fabricate micro-scale tooling with tolerances to ±0.0001" for components operating in extreme environments (-55°ree;C to +130°ree;C), • Operate advanced CNC and wire EDM equipment to create complex tooling for components with wire gauges as fine as 52 AWG, • Engineer solutions for hermetic sealing, vacuum impregnation, and automated encapsulation systems, • Support military and aerospace certification processes, ensuring compliance with MIL-STD requirementsWhat We're Looking ForRequired:, • 8+ years of progressive experience in precision mold design and toolmaking, • Advanced proficiency in SolidWorks and MasterCam, • Expert-level CNC programming and micro-machining skills, • Experience with wire EDM operations, • Technical diploma, completed apprenticeship, or equivalent trainingPreferred:, • Background in magnetic components, aerospace electronics, or defense manufacturing, • Understanding of MIL-STD standards and QPL requirements, • Knowledge of magnetic materials and high-temperature plasticsWhy Join Us, • Work on mission-critical applications for space exploration and national defense, • Solve complex engineering challenges requiring world-class precision, • Comprehensive health, dental, and vision insurance, • 401(k) with generous company matching, • Performance bonuses tied to program success, • Opportunity to work with cutting-edge micro-manufacturing technology #zr

Job DescriptionAbout Nominal Nominal is building the software infrastructure that powers the world’s most advanced hardware systems — from spacecraft and autonomous vehicles to next-generation industrial machines. Our platform ingests high-rate telemetry, validates complex autonomy software in real time, and helps engineering teams iterate faster without sacrificing safety or precision. We’re a small, fast-moving team of engineers and operators who own problems end-to-end, work across disciplines, and thrive on solving challenges at the intersection of hardware and software. As a dual-use platform, we're serving top-tier commercial and defense customers, including the U.S. Navy, United States Air Force, Shield AI, and Anduril. We’re backed by top-tier investors — Sequoia, General Catalyst, Founders Fund, Lux Capital, and Lightspeed Ventures — who share our mission to accelerate innovation in mission-critical systems. Our team brings experience from SpaceX, Palantir, Anduril, Applied Intuition, and other leading companies, united by a common goal: enabling hardware engineers to push the boundaries of advanced technology with speed, safety, and precision. As a Product Designer at Nominal, you will operate at the intersection of design and engineering, transforming complex data and workflows into intuitive, high-performance user experiences. You will collaborate closely with cross-functional teams to prototype, build, and refine features that enhance our platform's usability and functionality.\uD83D\uDE80 About the role • Lead the design lifecycle for mission-critical features and end-to-end workflows, from initial concept through to implementation., • Design novel interactions that extend the capabilities of human-to-machine interfaces., • The ability to design systems that solve both the immediate product problem and lay a foundation for the future. We want someone who understands the importance of design systems., • Understand and bring clarity to technical topics using concrete design outputs i.e., diagrams, data visualizations, layout, typography, interactions, and the like, • Collaborate closely with our customers to synthesize feedback and drive high-quality, impactful design solutions., • Contribute strategically to the product and design direction, making pivotal decisions that influence the future of Nominal's platform., • Use storytelling and design thinking to bring stakeholders together, aligning them with your vision and process., • Maintain a relentless focus on craft, constantly seeking to elevate the user experience by incorporating novel design solutions.\uD83D\uDD0D We're looking for someone with, • A minimum of 5+ years of experience as a designer for software development, with a strong emphasis on visual and interaction design., • Expertise in Figma, with a strong foundation in prototyping, testing, and implementation., • The ability to adapt to technical constraints in creative ways using your knowledge of web technologies., • An exceptional portfolio showcasing expertise in creating multimodal experiences., • A keen ability to articulate the rationale, process, and impact behind your design decisions., • A versatile skill set that does not require prior hardware experience but is capable of navigating highly technical environments, including aerospace, defense, and advanced energy applications., • An enthusiastic approach to problem-solving in complex scenarios, with a willingness to engage in customer immersion activities and on-site visits., • A background or experience in front-end software engineering is a big plus.✨ Benefits/Perks, • \uD83C\uDFE5 100% coverage of medical, dental, and vision insurance, • \uD83C\uDFD6️ Unlimited PTO and sick leave, • \uD83C\uDF7D️ Free lunch, snacks, and coffee, • \uD83D\uDE80 Professional Development Stipend

Job DescriptionSenior Quality Engineer Senior Quality Engineer Salary: $110k - $140k base, Benefits, PTO, 401K Requirements: GD&T experience within Aerospace/Defense. Nadcap preferred. Position Overview For nearly 100 years, we have been manufacturing high-precision and geometrically complex parts in the Aerospace industry. Due to growth we are actively hiring Senior and Mid-level Quality Engineers. Key Responsibilities • Develop and implement quality control processes to ensure compliance with AS9100, ISO 9001, and other relevant standards., • Conduct quality audits and assessments to identify areas for improvement and ensure adherence to quality standards., • Analyze data from inspections and tests to identify trends and implement corrective actions as necessary., • Work with engineering and production teams to design and improve processes that enhance product quality., • Lead and mentor junior quality engineers and quality technicians in best practices and quality methodologies., • Utilize GD&T and metrology techniques to ensure accurate product specifications and tolerances., • Oversee non-destructive testing (NDT) processes to ensure product integrity and compliance with industry regulations., • Bachelor's degree in Engineering or a related field., • 5+ years of experience in quality engineering, preferably in the aerospace or defense industries., • Strong knowledge of GD&T, AS9012, AS9100, ISO 9001, and related quality standards., • Experience with APQP, PAPP, CMM, RCCM, and NADCAP requirements., • Familiarity with non-destructive testing methods and metallurgical inspection processes., • Proficient in using quality tools and methodologies, including statistical process control and root cause analysis., • Excellent problem-solving skills and attention to detail., • Health, Dental, and Vision insurance, • PTO, • 401K with match, • Bonus - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 10/09/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Assembly is a fast-growing, venture-backed company with the ambition to transform the way we design and deliver imaginative, innovative urban architecture. We combine technology, design, architecture, and manufacturing to create mid/high-rise urban buildings that are greener and higher-quality, using a system that is faster and more efficient. As our pipeline grows and the system is refined, we unlock increasing cost efficiencies, ensuring long-term value for developers and the industry. As the Director of Manufacturing Engineering, you will define and implement the playbook for fabricating and assembling Assembly modular units within both existing and new manufacturing facilities. You and your team will codify the entire manufacturing process, ensuring that third-party factories can efficiently and precisely build our high-rise modules. This includes developing repeatable, scalable work instructions, designing transportable and reusable tooling, integrating digital manufacturing technologies, and serving as sustaining engineers to drive continuous improvement. While the goal is to scale through external partners, you must also be prepared to establish and manage temporary in-house assembly operations when necessary, requiring adaptability and strategic problem-solving. This role is essential to executing Assembly’s vision for distributed manufacturing, ensuring seamless integration between design, engineering, and production. You will be responsible for standardizing processes across third-party factories while also maintaining the technical and operational readiness to establish rapid-deployment assembly facilities when needed. Your leadership will ensure that every Assembly module is built with precision, efficiency, and consistency, regardless of location. You Will: Shape the future of industrialized construction by applying advanced manufacturing principles to an industry ripe for transformation. Design a first-of-its-kind manufacturing system that scales modular high-rise construction across multiple factories, integrating automation and digital workflows. Lead the convergence of aerospace- and automotive-grade manufacturing with building construction, developing processes that drive quality, efficiency, and scalability. Develop and implement a scalable manufacturing system that enables partner factories to efficiently fabricate and assemble modular units while maintaining the capability to launch in-house assembly operations when needed. Create a standardized manufacturing playbook, defining labor requirements, detailed work instructions, and quality control measures to ensure consistent production across multiple facilities Leverage digital manufacturing technologies (MES, ERP, and factory automation tools) to optimize assembly processes, monitor production quality, and drive operational efficiency. Lead process innovation and continuous improvement, acting as sustaining engineers to refine manufacturing workflows based on feedback from production partners. Establish and oversee pilot programs and first-article builds to validate new processes, tooling, and quality standards at partner facilities. Collaborate cross-functionally with supply chain, logistics, and design teams to seamlessly integrate manufacturability with design intent Define and track key performance indicators (KPIs) to measure production efficiency, scalability, and quality performance. Develop and lead a high-performing manufacturing engineering team, fostering a culture of trust, innovation, and professional growth. Work closely with executive leadership to align manufacturing strategies with overall business objectives while maintaining cost-effectiveness through Capex and Opex forecasting. Champion lean manufacturing principles in collaboration with partner factories, improving efficiency, quality, and cost-effectiveness at scale. You Have: Experience in high-precision, scalable manufacturing industries such as aerospace, automotive, or industrial equipment, with an interest in applying these skills to the built environment. A Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Aerospace Engineering, or a related discipline. 10+ years of experience in manufacturing engineering, process development, or production engineering in industries such as aerospace, automotive, or industrial manufacturing. The ability to think beyond traditional factory models and implement distributed, flexible manufacturing strategies that scale across multiple production sites. A background in designing and optimizing manufacturing processes for complex, large-scale products, with a focus on modularization and efficiency. Strong problem-solving skills with a systems engineering mindset—able to connect design, supply chain, production, and logistics into a seamless workflow. Experience designing transportable and reusable tooling and fixtures to optimize manufacturing efficiency and scalability. Proficiency with Manufacturing Execution Systems (MES), ERP systems, and digital factory tools, along with the ability to develop detailed work instructions and labor requirement documents for production teams. The ability to work with cross-functional teams, external suppliers, and manufacturing partners to drive scalable production solutions. You Are: A strategic planner and a hands-on operator, comfortable working in both partner-driven and in-house assembly environments. Capable of building and launching a rapid-deployment assembly facility. A clear communicator who can translate complex manufacturing requirements into actionable plans for both internal teams and external partners. Passionate about solving engineering challenges that blend digital and physical manufacturing, bringing industrialized processes to an industry in transformation. A manager of complex challenges with a solutions-oriented mindset, ensuring agility and efficiency in a rapidly evolving industry. A proven leader who leverages emotional intelligence and empathy to create an inclusive, high-trust work environment, enabling teams to perform at their best. Compensation Range: $170k- $250k / year Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills and experience. Equal Employment Opportunity (EEO) Statement Our company does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factor. To Apply Submit: To apply, submit your application at the top of this page or visit our Careers Page.

Job DescriptionDescriptionThe Manufacturing Engineering group at Knowles Precision Devices is responsible for process engineering, yield improvement and new process introduction. The Knowles Thin Film Product Line includes RF and microwave components and custom built substrates for applications in telecom, aerospace and defense markets. This position is a hands-on engineering role with project management responsibilities for an experienced engineer in solving complex problems, while providing support to operations through improving yield, improving the flow of parts and implementing new equipment. This is a fast paced position, working on parallel projects that requires time management to support short term and long term needs of the company. Salary and title dependent on experience. Key Responsibilities • Participate in, organize and run yield improvement projects, relying on knowledge of processes, systems of systems, and LSS methodologies in support of organizational goals, • Work with multi-disciplinary (materials, chemistry, mechanical, RF, electronics) and cross-functional (operations, engineering, QA, CI) teams, • Run equipment, processes and experiments in an operational environment, • Collect and analyze data on yield and process capability, • Update and develop operations documentation (WI/JI) for existing processes and new processes, • Participate in Material Review Board (MRB) and Failure Review Board (FRB) for Root Cause investigations, • 7+ years’ experience supporting manufacturing in process engineering, QA or continuous improvement roles., • 3+ years’ direct experience with semi-conductor or thin film processes such as: Photolithograpy, electrolytic and electroless plating, Sputter, CVD or other vacuum deposition, Plasma etching, or die singulation, • Bachelors of Science in engineering or science, or equivalent experience, • Experience with statistical methods (DOE, SPC, FMEA) and data analysis tools (e.g., JMP, Minitab, MATLAB, Python, SQL), • Experience reading and understanding CAD engineering drawings using GD&T, • Experience measuring and validating workmanship to drawing specification, • Experience authoring job instructions and work instructions, • Strong written and verbal communication skills, communicating to both operators and management, • Willingness to train others and work as a member of inter-disciplinary teams, • Leadership or supervisory experience a plus, • Project management experience; certification a plus, • Must be able to perform lab duties in an ISO certified clean room, meeting gowning, ESD, and EHS requirements., • Medical, dental and vision insurance plans, • Prescription Drug Plans, • Basic Life Insurance, • 401k plan with company match, • Tuition Reimbursement Program, • Security Clearance Incentive Program, • Employee Referral Program, • Flex PTO and NYS Sick and Safe Leave, • Paid HolidaysExciting Onsite Perks:, • Free Starbucks coffee available at our café, • Free access to our Fitness Center, • Fresh food is available for purchase in the cafeteria store. ITAR Statement: Please note that this position may require access to technical data controlled under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants must be U.S. persons (citizens, lawful permanent residents, or individuals granted refugee or asylee status) or have the necessary authorization to access controlled technical data. Compliance with ITAR and EAR regulations is a condition of employment. Notice to Staffing Agencies, Search Firms and Recruitment Agencies: The recruitment process at Knowles is managed through the Human Resources department. Knowles does not accept resumes submitted from 3rd party agencies outside of our system. To submit resumes, 3rd party agencies will need to be a pre-approved vendor with a valid contract in place, be actively engaged by Knowles to recruit for a specific position and have agency log in credentials to submit candidates to our careers portal. Please do not submit resumes via e-mail, through our external website or directly to our employees. Any resumes submitted in this way become the property of Knowles and will not be eligible for any placement fee.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off Optical Applications Engineer (Remote) Job Description: Avantier Inc., a premium high-precision custom optics manufacturer and innovative imaging solutions provider, is seeking an experienced Optical Applications Engineer to join our growing team. This is an exciting opportunity to deliver high-precision custom optical solutions to clients across industries such as AR/VR, Life Sciences, Biomedical, Aerospace, and more. Responsibilities: • Lead optical design and engineering efforts for new customer projects., • Collaborate with customers, the Sales team, and Sales Engineers to drive project success., • Assist the Sales team during technical calls with engineers., • Review and interpret customer optical systems using Zemax., • Develop and manage the production of marketing materials (online, electronic, video, and print)., • Create and deliver training materials for the Sales team and onboard new engineering team members., • Work closely with the marketing team on product launches and existing product enhancements., • Prioritize and manage multiple projects simultaneously.Requirements:, • Minimum of 5 years of experience in optical engineering, opto-mechanical systems, optical assembly, or optical metrology., • Expertise in optical lens fabrication, plastic optical materials, complex optical system designs, and tolerance analyses., • Proficiency in sequential and non-sequential ray tracing., • Strong knowledge of optical simulation software such as Zemax, CodeV, or LightTools., • Proven ability to perform comprehensive system-level performance analyses and develop detailed optical system specifications., • Deep understanding of the complete production lifecycle, from design to manufacturing., • Excellent written and verbal communication skills.Education:, • Bachelor's Degree (Required), • Major: Optical Engineering, Physics, Electrical Engineering, Mechanical Engineering or a related technical field., • Minimum Experience: 5 years of hands-on experience in optical design, product development, or applications engineering.Required Skills:, • Experience with Zemax, SolidWorks and AutoCAD., • Strong analytical and problem-solving abilities. This is a remote position.

Job Description iRocket is engineering fully reusable, fully autonomous small launch vehicles to enable responsive, cost-effective, and sustainable access to space. Our team is building the infrastructure—both in orbit and on the ground—needed to support frequent launches and mission operations. The Role: We are seeking a Construction Project Engineer to lead and support the development of iRocket’s factory, test, and facility infrastructure. This role will play a key role enabling our production and test operations by implementing facility projects, collaborating with contractors, and coordinating with internal stakeholders. • Support all aspects of project implementation from planning through execution, • Create scopes of work, obtain competitive bids, and oversee contractor selection, • Conduct job walk-downs and interface with vendors, engineers, and internal teams, • Review technical plans, drawings, and specifications to ensure alignment with project goals, • Monitor project schedule, budget, and deliverables, • Respond to scope, schedule, or deliverable questions from stakeholders, • Manage and maintain all project documentation (RFIs, submittals, change orders, etc.), • Bachelor’s degree in Engineering, Construction Management, Architecture, or related field, • Ability to read and interpret technical drawings, plans, and specifications, • Experience in facilities, infrastructure, or industrial construction in aerospace or high-reliability sectors, • Strong computer and software skills (project scheduling, documentation, collaboration tools), • Excellent verbal and written communication skills with internal teams, vendors, and contractors, • Aptitude for problem-solving, balancing scope, cost, and schedule Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Chromalloy is a global engineering & solutions company. We are a leadings provider of aftermarket parts, repairs, and solutions that safely & reliably extend the life of aircraft engines and gas turbines. We develop, manufacture and repair critical turbine components for a range of engine platforms. Our solutions support the engines running the aerospace, energy and defense industries around the world. Video: What We Do Why work at Chromalloy? Chromalloy employees are proud, passionate problem-solvers who strive to live our values every day. A career with Chromalloy is an opportunity to learn from top industry experts, work with important technologies, and unlock a passion for innovation. Join our team of experts, innovators and problem-solvers delivering world-class solutions for our customers. As a global company, we are committed to creating an inclusive environment where all employees feel represented, heard, and able to bring their best selves to work every day. Be part of something bigger with Chromalloy! Our Total Rewards Program is designed to support you today and in the future. • Comprehensive and flexible benefit options starting on day one, including medical, dental, vision, EAP, wellness incentives, and 401(k) with employer matching., • Development & progression opportunities for every employee – regular performance conversations, training and development curriculum, and engineering fellowship programs., • Paid time off, including vacation, sick time, paid holidays, floating holidays, and parental leave—all eligible on your first day of employment! Position hours are 10pm-8am Sunday through Thursday with one Friday per month required Supervises and coordinates the activities of workers within the department engaged in operating a variety of machines to manufacture parts or products. Job Duties: • Directly supervises employees. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems., • Analyzes work orders to estimate worker hours and create machining schedules that meet both internal and external needs., • Directs workers in adjusting machines and equipment to repair products which fail to meet standards., • Establishes or adjusts work procedures to meet production schedules., • Interprets specifications, blueprints, and job orders to workers, and assigns duties., • Interfaces with others in the organization to ensure customer deadlines are met., • Inspects and measures parts and products to verify conformance to specifications., • Associate Degree required; Bachelor’s degree preferred;, • Four (4) years’ experience and/or training; or equivalent combination of education and experience, • Practical knowledge of aircraft components, machining, welding, inspection and related disciplines., • Previous knowledge of coatings, plasma coating, heat-treating, thermal spraying, or plating preferred., • Six Sigma Greenbelt/Blackbelt preferred, • Position must be able to obtain a Repairman Certificate within 2-4 months of employment or have the credentials i.e. A&P license so they are able to supervise any maintenance activity, • Must be fluent in English, i.e. speaking, reading, writing #ZR Due to government regulation only US persons (U.S. citizen, U.S. naturalized citizen, U.S. permanent resident, holder of U.S. approved political asylee or refugee status) may be considered for this role. Chromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations. Chromalloy is an equal opportunity employer - vets/disabled. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please contact: Company DescriptionChromalloy is a global engineering & solutions company. We are a leadings provider of aftermarket parts, repairs, and solutions that safely & reliably extend the life of aircraft engines and gas turbines. We develop, manufacture and repair critical turbine components for a range of engine platforms. Our solutions support the engines running the aerospace, energy and defense industries around the world. Why work at Chromalloy? Chromalloy employees are proud, passionate problem-solvers who strive to live our values every day. A career with Chromalloy is an opportunity to learn from top industry experts, work with important technologies, and unlock a passion for innovation. Join our team of experts, innovators and problem-solvers delivering world-class solutions for our customers. As a global company, we are committed to creating an inclusive environment where all employees feel represented, heard, and able to bring their best selves to work every day. Be part of something bigger with Chromalloy! Our Total Rewards Program is designed to support you today and in the future. • Comprehensive and flexible benefit options starting on day one, including medical, dental, vision, EAP, wellness incentives, and 401(k) with employer matching., • Development & progression opportunities for every employee – regular performance conversations, training and development curriculum, and engineering fellowship programs., • Paid time off, including vacation, sick time, paid holidays, floating holidays, and parental leave—all eligible on your first day of employment!, • Competitive pay, including eligibility for quarterly and annual bonuses, depending on role and site. Eligibility for individual benefit plans may vary based on employment status. Chromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations. Chromalloy is an equal opportunity employer - vets/disabled. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please contact: is a global engineering & solutions company. We are a leadings provider of aftermarket parts, repairs, and solutions that safely & reliably extend the life of aircraft engines and gas turbines. We develop, manufacture and repair critical turbine components for a range of engine platforms. Our solutions support the engines running the aerospace, energy and defense industries around the world. \r\n\r\nWhy work at Chromalloy?\r\nChromalloy employees are proud, passionate problem-solvers who strive to live our values every day. A career with Chromalloy is an opportunity to learn from top industry experts, work with important technologies, and unlock a passion for innovation. Join our team of experts, innovators and problem-solvers delivering world-class solutions for our customers. As a global company, we are committed to creating an inclusive environment where all employees feel represented, heard, and able to bring their best selves to work every day. Be part of something bigger with Chromalloy!\r\n\r\nOur Total Rewards Program is designed to support you today and in the future.\r\n\r\n* Comprehensive and flexible benefit options starting on day one, including medical, dental, vision, EAP, wellness incentives, and 401(k) with employer matching.\r\n* Development & progression opportunities for every employee – regular performance conversations, training and development curriculum, and engineering fellowship programs.\r\n* Paid time off, including vacation, sick time, paid holidays, floating holidays, and parental leave—all eligible on your first day of employment!\r\n* Competitive pay, including eligibility for quarterly and annual bonuses, depending on role and site.\r\n\r\nEligibility for individual benefit plans may vary based on employment status.\r\n\r\nChromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.\r\n\r\nAny offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations.\r\n\r\nChromalloy is an equal opportunity employer - vets/disabled.\r\n\r\nIn the United States, if you need a reasonable accommodation for the online application process due to a disability, please contact:

Job Description BASIC FUNCTIONS Facilitates accurate and timely processing of vendor invoices for inventory and non-inventory items. Also, scan and file all paper financial statements into electronic format. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES · On a daily basis, facilitate accurate and timely processing and posting of all of accounts payable invoices daily, obtaining approvals and troubleshooting issues when needed. · Establishing and maintaining relationships with new and existing vendors · Manage freight charges for all carriers (FEDEX UPS, and DHL) download reports and reconcile carrier shipment type to internal shipment report; dispute any issues with carrier weekly. · Reconcile and communicate un-invoiced receiving (UIR) and open receivers’ transactions on a weekly basis. · Process credit memo, adjustments, and journal entries. · Record commission charges. · Manage Accounts Payable folder ensuring all invoices processed by end of day. · Processing of COD payments. · Prepare COA report. · Backup AP Manager to download credit card activity from account websites, download into EPDS accounting system and code all charges weekly. · Backup AP Manager to process trade show charges in Concur. · Analyze vendor statements of accounts weekly. · Wire initiation for purchase order payments including coding into EPDS. · Processing of GS deductions · Receive, open and distribute mail by end of mail. · Performs data entry into our computer software programs. · Acts as backup to AP Manager. · Ensures compliance with company code of conduct and all applicable laws, regulations, rules and policies. · Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. · Perform other duties as necessary STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. EDUCATION / EXPERIENCE / COMPETENCY · Associate degree or higher in accounting or any business-related discipline, required. · Basic proficiency in Microsoft Excel · 2 years+ experience within accounts payable discipline. · Experience processing invoices in high-volume · Experience Comparing purchase orders, prices, terms of payment and other charges. · Strong analytical skills. · Ability to compare/analyze reports. · Strong problem-solving skills, basic accounting principles knowledge, documentation skills, research and resolution skills, data analysis and multi-tasking skills. Company DescriptionBlue Raven Solutions, including Triman Industries, Inc., and Crestwood Technology Group, LLC (collectively, the “Company”) is a portfolio company of AE Industrial Partners, LP (“AEI”), a private equity firm specializing in aerospace, defense & government services, space, power & utility services, and specialty industrial markets. Since August 2019, AEI in partnership with the Company’s management team and other shareholder partners, has been strategically building a unique platform of scale serving the complex military aftermarket with a broad set of capabilities that enable OEMs to increase sales, performance and productivity while allowing military customers to minimize program risks and costs. Blue Raven Solutions, headquartered in Morristown, NJ and having decades of operating experience, provides tech-enabled, scaleable supply chain management solutions to over 80 OEM partners and a growing list of military customers including the Defense Logistics Agency (DLA), US Navy, US Army and more. Operating through two divisions, CTG and Triman, the Company provides a broad range of solutions including distribution, program management, obolesence management, counterfeit avoidance, kitting and engineering services in support of mission critical components and systems across a wide variety of long-life military programs. This combination of solutions is supported by the Company’s proprietary, industry leading SEDNATM Analytics platform which drives data-informed decisions and outcomes while keeping fleets operational, ready, and safe.Blue Raven Solutions, including Triman Industries, Inc., and Crestwood Technology Group, LLC (collectively, the “Company”) is a portfolio company of AE Industrial Partners, LP (“AEI”), a private equity firm specializing in aerospace, defense & government services, space, power & utility services, and specialty industrial markets. Since August 2019, AEI in partnership with the Company’s management team and other shareholder partners, has been strategically building a unique platform of scale serving the complex military aftermarket with a broad set of capabilities that enable OEMs to increase sales, performance and productivity while allowing military customers to minimize program risks and costs.\r\n\r\nBlue Raven Solutions, headquartered in Morristown, NJ and having decades of operating experience, provides tech-enabled, scaleable supply chain management solutions to over 80 OEM partners and a growing list of military customers including the Defense Logistics Agency (DLA), US Navy, US Army and more. Operating through two divisions, CTG and Triman, the Company provides a broad range of solutions including distribution, program management, obolesence management, counterfeit avoidance, kitting and engineering services in support of mission critical components and systems across a wide variety of long-life military programs. This combination of solutions is supported by the Company’s proprietary, industry leading SEDNATM Analytics platform which drives data-informed decisions and outcomes while keeping fleets operational, ready, and safe.

Job Description BASIC FUNCTIONS Quality Engineer will provide support to the Sr. Director of Quality Compliance in maintaining a strong overall Quality Compliance Program including the Quality Management System. The core focus shall be technical reviews implemented and established for each Department. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES • Ensures customers’ technical requirements are met by reviewing process procedures, test procedures, and supplier / Internal quality manuals to understand the scope and testing requirements, • Ensures products meet the organizations and customers quality and product integrity requirements., • Supports process development or operations team by providing analysis and expertise throughout the inspection & testing process., • Counsel and advise Sales personnel on technical developments or nonconformances (drawings, capabilities, etc.), • Advise Sales and Operations leadership on capability/capacity for certain types of orders, products, etc., • Enforce CTG Quality Planning including product sampling., • Support RFP/RFQ/Contract reviews – quality and technical review, • Conduct routine Material Review Board & Counterfeit Review Board actions and provide resolution/disposition, • Responsible for reviewing and submitting CTG requests for designated Airworthiness Rep 8130’s, • Maintain and retain a working list of qualified ASA-100/FAA AC 00-56 trained Inspectors/Technicians., • Oversight of the DQR (Designated Quality Representative) program for Sikorski, Lockheed, GDLS, and UTC. Utilizing First Article / First Piece development per AS9102, • Conduct sampling reviews of contract to shipped product(s), such audits shall be documented, • Ensuring equipment Preventative Maintenance and Calibration requirements are established and followed., • Develop and implement HAZMAT protocols including handling and disposition, • Identifies root causes of problems in the inspection process; recommends and/or implements corrective measures., • Champions Lean-Six Sigma methodologies within the organization; responsible for organizations’ 5S program and identifies and leads projects focused on reducing waste and increasing quality, • Ensure Return Material Authorization process is reviewed and documented, authorize approval as required per process., • Identify requirements for product(s) reviewed at CTG for potential Reach/RoHS specifics, • Manage and Enforce ESD S20.20 requirements within critical zones., • Review all Return to Vendor items for adequacy prior to material leaving facility, process all requirements within EPDS., • Disposition all discrepant material, determine (based on RMA/RTV) scrap rates, rework rates and return to stock., • Serve as backup to Senior Director of Quality Compliance for conditional quality plan approvals and conditional supply-chain activation approvals., • Collect and Analyze quality information for the development of quality strategies and continuous improvement plans, • Performs other duties as assigned. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Audit Findings (Reference QMR outputs), • FAI completion rates (M/Y, Quantity and per customer) Avg. process time/capacity, • Conditional Quality plannings (M/Y – Type, product specific, processing time), • RMA & RTV Data, Including DM Rates (Scrap, Rework, etc.) EDUCATION / EXPERIENCE / COMPENTENCY Bachelor’s degree in industrial engineering or related discipline required. • Certified Quality Engineer or equivalent, • ESD Program Manager preferred, • Approximately 0-4 years of experience, • Excellent interpersonal skills with ability to serve as a liaison with developers, project managers, and customer support., • Strong analytical and problem-solving skills., • Proficient with Microsoft Office Suite or related software, • Excellent organizational skills and attention to detail Preferred • Lean Six-Sigma Training/Certification, • Operational experience within QMS in Aerospace, Medical or other highly regulated industry

Job Description Quality Engineer II - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Quality Engineer II position will work closely to solve quality problems and support new development programs, legacy programs, and conduct internal audits. SUPERVISORY RESPONSIBILITIES • This job has no supervisory responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Working closely with Engineering to ensure that designs meet applicable quality requirements., • Plan and perform internal quality audits and execute action items., • Lead quality initiatives to reduce scrap and rework by developing and facilitating cross-functional teams., • Conducting quality investigations., • Be an active participant in the material review board., • Provide quality function support by working closely with Sales, Engineering, and Manufacturing to manage customer relations, expectations, needs and satisfaction., • Independently drive and direct actions with departmental groups to maintain MRB and RMA issues., • Drive key quality performance metrics: DPPM, OTD, Cost of Quality, Customer Scorecards, Internal Audit Risk and Effectiveness, Supplier Performance, Contract Review., • Source inspection liaison, • Travel to customer and supplier locations as required. SECONDARY DUTIES AND RESPONSIBILITIES • Supporting new product introduction programs by creating and maintaining the following, as required:, • Production Part Approval Process, • Advanced Product Quality Planning, • Zero Defects Program, • Control Plans, • Inspection Plans, • Inspection Reports, • First Article Inspection Reports, • Supplier Approval and Development, • Attend NPI meetings, including, • Preliminary Design Reviews, • Critical Design Reviews, • Make Buy Reviews, • Monitor the Progress of NPI programs through manufacturing and into production, • Conduct purchase order reviews related to NPI and production programs, • Interact with customers on NPI and production programs, • Engage in problem-solving with engineering, operations, and supply chain on NPI and production programs, • Support shipments of NPI and production programs, • Conduct internal audits, • Become a designated quality representative when required by the customer QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Knowledge of aerospace quality requirements and specifications., • Proven track record of partnering with manufacturing and engineering, • Experience with root cause analysis and corrective action. Experience with formal quality and operations systems., • Capable of reviewing and interpreting drawings, contracts / POs, and applicable processing standards., • Skilled at performing First Article inspections., • Proficiency with MS Office applications: Word, Excel, PowerPoint, and Outlook., • An understanding of the use and application of statistics and SPC., • Six Sigma preferred EDUCATION AND/OR EXPERIENCE • Bachelor’s Degree in Engineering required, • 9 to 10 plus years working in the aerospace and or automotive industry in a quality, engineering, or manufacturing capacity., • Previous experience in a high-mix, low-volume job shop, • Ability to manage priorities and meet deadlines in a fast-paced environment, • Working knowledge of ISO 9001:2015 and AS9100D Quality Management System processes., • Due to ITAR restrictions, an export license may be required OTHER SKILLS • Computer Literacy in Excel, Minitab, CAD, and Visio, • Advanced problem-solving and advanced data analysis techniques, • Knowledge in and experience in 8D problem-solving techniques, SPC, and statistical analysis PHYSICAL DEMANDS • Continuous periods of sitting at a desk and working on a computer and phone., • Prolonged time standing., • Must be able to occasionally lift 25 pounds at a time., • Frequently required to stand, walk, and reach with arms and hands. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $100,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job DescriptionA World-Changing Company Palantir builds the world’s leading software for data-driven decisions and operations. By bringing the right data to the people who need it, our platforms empower our partners to develop lifesaving drugs, forecast supply chain disruptions, locate missing children, and more. The Role Backend Software Engineers at Palantir build software at scale to transform how organizations use data. Our Software Engineers are involved throughout the product lifecycle, from idea generation, design, prototyping, and production delivery. You will collaborate closely with technical and non-technical teammates to understand our customers' problems and build products that solve them. We encourage movement across teams to share context, skills, and experience, so you'll learn about many different technologies and aspects of each product. Engineers work autonomously and make decisions independently, within a community that will support and challenge you as you grow and develop, becoming a strong technical contributor and engineering leader. Our Product Development organization is made up of small teams of Software Engineers. Each team focuses on a specific aspect of a product. Our infrastructure teams are responsible for the lowest layers of our software stack, often focused on database technologies, distributed systems, large scale data systems, security, and application infrastructure. As a Software Engineer on infrastructure, you'll contribute high-quality code to underpin Palantir Foundry and Gotham with performant, secure, and scalable building blocks, enabling products deployed to the most important institutions in the public and private sector. You'll build the foundational capabilities that power our products used by research scientists, aerospace engineers, intelligence analysts, and economic forecasters, in countries around the world. We’re hiring engineers who are passionate about solving real-world problems and empowering both developers and end-users to work optimally. If you’re motivated to develop reliable, performant, and scalable systems, and to design robust APIs and primitives, this role offers the opportunity to make a significant impact on our products and the people who use them.Core Responsibilities • Building a performant search and indexing ecosystem for complex granularly permissioned data, • Contributing to open-source data processing libraries, integrating the latest innovations to achieve performance gains, • Building the distributed systems that power large scale compute workloads, orchestrating and efficiently scheduling hundreds of thousands of containers every hour, • Designing architecture and opinionated APIs to keep application developers on the happy path, • Tracing and performance observability in high scale distributed microservice architectures, • Building reliant, performant, and scalable systems for storage, auth, or asset serving to enable other product teams to build robust applications without deep domain expertise in the underlying systems, • Automating the deployment, management, and operations of complex distributed systems like Cassandra, Elasticsearch, Kafka, and more across different environmentsTechnologies We Use, • Different backend languages, including Java, Rust, and Go, • Open-source technologies like Cassandra, ElasticSearch, Spark, Kafka, Kubernetes, Flink, • Industry-standard build tooling, including Gradle and GitHubWhat We Value, • Demonstrated ability to collaborate and empathize with a variety of individuals. Able to iterate with users and non-technical stakeholders and understand how technical decisions impact them., • Ability to learn new technology and concepts, even without in-depth experience. Experience developing and managing highly-available distributed systems is beneficial, but not required., • Bias towards quality and thoughtful about edge cases (“anything that can go wrong will go wrong”); writes code that is defensive against all possibilities., • Builds solutions and APIs with users in mind while maintaining a high engineering bar. Seeks to centralize and abstract complexity away from our users in order to expose simple, powerful APIs for consumers., • Active US Security clearance, or eligibility and willingness to obtain a US Security clearance is beneficial, but not necessary.What We Require, • Engineering background in Computer Science, Mathematics, Software Engineering, Physics or similar field., • Strong coding skills with demonstrated proficiency in programming languages, such as Java, C++, Python, Rust, or similar languages., • Familiarity with storage and data processing systems, cloud infrastructure, and other technical tools.

Job Description Under minimum supervision working from blueprints, sketches written and/or verbal instructions, sets up and performs the most diversified and complex progressive machining, fitting and assembly operations. Determines proper tooling and sequence of operations, and skillfully uses all machinists’ hand tools and machine shop measuring equipment in order to produce work to specifications. Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tool to be used. ESSENTIAL FUNCTIONS • Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tools to be used., • Must be able to skillfully use all machinist’s hand tools and measuring instruments., • Must be familiar with the machining of most materials., • Must be able to use advanced shop math, including trigonometry., • Moves parts to and from the work area., • Maintains good housekeeping in the work area., • Meets all safety requirements in the machine shop and follows all company policies., • Requires a High school diploma or equivalent education, • Requires the completion of an apprenticeship program or similar on the job experience of approximately four years or at least five years experience as a machinist., • Ability to operate standard and specialized equipment to produce prototype and/or production parts, • Ability to perform standard shop computations, using technical math, geometry and trigonometry., • Proficient use of set up and operation of CNC machining center., • Proficient use of tool and surface grinders, • Proficient use of all shop inspection equipment, including but not limited to, CMM, comparator, digital height gages, micrometers, etc., • Moderate physical activity. The job location is at 2 Lawrence Road, Springfield, NJ 07081 We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated manufacturing engineers to join its rapidly growing team. The Manufacturing Engineering role will develop and implement processes, tooling, and equipment necessary to manufacture and test high temperature superconducting (“HTS”) magnets. This role will also help establish the foundations of Process Engineering and Quality Engineering at Thea Energy as we build and commission a magnet manufacturing and test facility. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibilities: • Generate documentation for the manufacture of HTS magnets, including processes and procedures, work instructions, and quality criteria, • Design, build, and commission magnet manufacturing tooling and equipment, • Work iteratively with magnet engineers to incorporate design for manufacture and lessons learned, • Develop and implement virtual and physical inventory management and manufacturing BOMs, • Generate specifications for and collaborate with vendors to procure hardware that meets quality specifications, • Define roles for and coordinate onboarding of manufacturing technicians, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersQualifications:, • Experience with first encounters of complex hardware assemblies, • Experience scaling from first-of-a-kind to continuous production, • Experience generating and interpreting manufacturing drawings, particularly GD&T, • Experience with fusion processes, including soldering, brazing, and welding, • Experience with planning and execution software including PLM, MRP, and inventory management, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in mechanical engineering, manufacturing engineer, or related field, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $100,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job Description iRocket (Innovative Rocket Technologies Inc.) is developing fully reusable, fully autonomous small launch vehicles to enable affordable and sustainable access to space. As we expand our programs and partnerships, we are seeking a Proposal Manager/Technical Writer to lead the development of compelling, compliant, and high-quality proposals for commercial and government opportunities. This role is perfect for someone who thrives at the intersection of engineering, business strategy, and storytelling — helping translate complex technical work into winning proposals. The Role: • Lead the preparation, coordination, and submission of proposals for NASA, DoD, and commercial contracts, • Work closely with engineering, business development, and leadership teams to develop clear, persuasive technical narratives, • Manage proposal schedules, compliance matrices, and submission requirements, • Review solicitations (RFIs, RFPs, BAAs) and identify key requirements and evaluation criteria, • Coordinate input from SMEs and technical contributors to ensure consistency and alignment, • Maintain a proposal content library and ensure brand and message consistency, • Support grant applications, white papers, and internal review processes, • Bachelor’s degree in Engineering, Communications, Business, or related field, • 3–6 years of experience in proposal writing or management (aerospace, defense, or technology preferred), • Strong writing, editing, and organizational skills with exceptional attention to detail, • Understanding of federal acquisition and funding mechanisms (NASA, DoD, SBIR/STTR, etc.), • Ability to manage multiple deadlines and coordinate cross-functional input, • Proficiency with Microsoft Office Suite and Adobe tools; experience with proposal management platforms a plus, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket (Innovative Rocket Technologies Inc.) is developing fully reusable, fully autonomous small launch vehicles to revolutionize access to space. As we expand our operations and partnerships, we’re seeking a Business Development Manager to drive strategic growth, build customer relationships, and secure new commercial and government opportunities. This role sits at the intersection of aerospace innovation, customer engagement, and strategic execution. You’ll help define how iRocket engages with launch customers, government agencies, and industry partners — turning vision into measurable impact. The Role • Identify and develop new business opportunities in the commercial, civil, and defense space sectors, • Manage the full business development lifecycle — from prospecting and pipeline management to negotiation and contract execution, • Build and maintain strong relationships with key stakeholders, customers, and partners, • Develop and deliver presentations, proposals, and responses to solicitations (RFPs, RFIs, BAAs, SBIR/STTRs), • Collaborate with internal teams (engineering, finance, strategy) to align customer needs with company capabilities, • Support partnership development, strategic collaborations, and potential MOU or JV discussions, • Monitor market trends, competitor activities, and policy developments in the space industry, • Represent iRocket at industry events, conferences, and networking opportunities, • Contribute to strategic planning and long-term growth initiatives Requirements • Bachelor’s degree in Business, Engineering, or related field (MBA or technical degree preferred), • 5+ years of experience in business development, sales, or strategy (aerospace, defense, or tech sector preferred), • Proven track record of managing high-value partnerships or contracts, • Familiarity with government contracting, proposal processes, and funding mechanisms (NASA, DoD, DARPA, etc.), • Excellent communication, negotiation, and presentation skills, • Ability to build trust and maintain relationships with technical and executive stakeholders, • Entrepreneurial mindset — comfortable operating in a fast-paced, mission-driven startup environment, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionJob SummaryAre you passionate about driving business growth in the aerospace, defense, and space industries? Our client is expanding their operations to the United States and is seeking a Business Development Specialist to play a key role in developing and expanding business in the U.S. market. Our client needs a motivated individual with a deep understanding of the aerospace industry and a proven track record of driving growth.Responsibilities: • Market Research and Analysis: Keep updated on industry trends and technological advancements., • Business Development Strategy: Develop and implement plans to expand our presence in the U.S., • Relationship Building: Forge strong connections with key industry players., • Proposal Development: Create compelling proposals for potential clients., • Sales and Revenue Generation: Achieve sales targets and convert leads into clients.Qualifications and Skills:, • Bachelor’s degree in business or engineering., • Proven experience in business development within the aerospace, defense, or space industry., • Excellent communication skills and the ability to build strong relationships., • Results-driven with a proven track record in meeting sales targets., • Self-motivated and willing to travel for business needs.Benefits:, • Competitive salary, • Paid vacation and sick time, • Health insurance including medical, dental, and vision, • 401k contributionThis is an exciting opportunity to be part of a leading aerospace precision ball bearing business with a rich history and commitment to excellence. Apply now and elevate your career to new heights in the aerospace industry.

Job DescriptionCompany Description STS Aerospace is a world-leading provider of reliable, top-quality products for fluid conveyance, serving commercial and military aircraft and the energy, space and marine industries. The depth and breadth of our engineering expertise enables us to design, build and customize fixtures and tooling that will meet the needs and solve the problems you are experiencing now and prevent issues from emerging in the future. Job Description STS Aerospace is looking for a Manufacturing Engineer that is accountable for improving and maintaining first pass yield for specified parts and/or processes. This is accomplished by driving continuous improvement initiatives, process development/modification, documentation of standards/best practices, and equipment onboarding/troubleshooting. Candidate shall also support cross functional initiatives with Production, Quality and Purchasing departments to meet company goals and product quality standards. Scope of Responsibilities: • Troubleshooting of quality issues throughout the production process: welding, brazing, nickel plating, cleaning, and borescope inspection. Additional processes: bending., • Use continuous improvement and lean techniques to increase production efficiency, eliminate waste, and drive cost savings opportunities., • Support production staff with specification/technical knowledge, inspection techniques, weld/braze consumables management and day-to-day trouble shooting efforts., • Documentation and standardization of processes via work instructions and operating instructions to increase efficiency, facilitate cross-training and enable proper equipment usage., • Equipment and tooling on-boarding into production process to support new product, process efficiency, ergonomics or safety. Basic troubleshooting, light-level repair and/or export of orbital weld machines, orbital weld heads, steam cleaning machines, tungsten grinders etc., • Effective communication with production employees, management staff and cross-functional team to ensure the alignment of efforts to meet company goals., • Conduct classes and trainings to support continuous improvements efforts and product quality i.e. Visual Inspection and Back-to-Basics courses., • Manage operator qualifications to ensure production staff is qualified to perform given tasks, • Ability to work in a fast-paced, deadline-oriented team environment, • Ability to read, interpret, translate engineering drawings and customer specifications to drive compliance, • Excellent team player with a great attitude. Accountabilities • Support of Team Goals, Represent company as process expert, requisition tooling and equipment for processes., • Performance Measurement & Performance Evaluation., • Meet team quarterly objectives. Adherence to goals and behaviors associate with achieving them, • First pass yield, • Process compliance (welding, bending, brazing, chemical), • Project completion/execution, • Aging (units over lead-time)Qualifications, • Proven working experience as a manufacturing engineer or in a related field., • Experience in blueprint reading and spec interpretation., • Must be comfortable in a manufacturing environment often fast-paced and loud., • Must be able to stand, lift, walk, bend, and reach during their shift., • Must be comfortable wearing safety glasses., • Work well within a team., • Creative and innovative thinking skills., • Problem-solving skills. Additional Information Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Life insurance, • Paid time off At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description At Near Space Labs we design, build and operate a fleet of stratospheric robots to image the earth. We launch our proprietary, balloon-based imaging robots to heights between 40,000 and 60,000 feet. From this vantage point, we capture petabytes of imagery for a variety of use cases. Our mission is to provide high quality, updated imagery that we believe should be accessible to everyone who needs it. By approaching earth imaging from a new vantage point and applying cutting edge methodologies, we drive faster aerospace innovation without tradeoffs. We are always on the look out for creative, curious, and diverse problem solvers who thrive in organized chaos. If you're a hardworking innovative thinker who is passionate about pushing boundaries in the aerospace field and contributing to a collaborative environment, then we want to hear from you. Locations Brooklyn, NY / US (remote) Barcelona, Spain / EU nationals or work permit holders General Skills We Look For: Not all of this is required • Bachelor's degree in Business, Data Science, Management Information Systems or a related analytical field., • Bachelor's degree in Data Analytics, Computer Science, Information Systems, Business Administration, or a related field, or equivalent professional experience., • 3+ years of experience working with technical hardware, or a BS degree desirable but not essential., • Experience in an engineering production or maintenance organization., • A proven track record of 2-5 years in a relevant field, demonstrating expertise and experience., • Demonstrated experience in managing teams, effectively delegating tasks, and optimizing operational workflows to achieve desired outcomes., • Exceptional ability to manage multiple projects simultaneously, prioritize tasks effectively, and ensure adherence to strict deadlines., • A solid background in workflow coordination, efficient task assignment, and the implementation of robust quality assurance processes, preferably within a data-intensive environment., • Ability to review processing performance metrics, identify trends, and suggest data-informed improvements to existing workflows., • Familiarity in using workflow management tools such as Airtable or similar platforms for effective task tracking and team collaboration is a plus., • An exciting startup culture where you will have the opportunity to play a critical role in building and scaling a one-of-a-kind technology and organization., • You will be part of an enthusiastic, international and motivated team of professionals who are committed to building unique technologies, being rigorous, and finding novel solutions to interesting problems., • A diverse and inclusive workplace where we welcome people of different backgrounds, experiences and perspectives., • A commitment that you will never be bored., • Medical, dental, and vision coverage. Near Space Labs is committed to diversity in our organization and building an equitable and inclusive environment for people of all backgrounds and experiences. Near Space Labs provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics.

Job DescriptionAbout Voyant Photonics Voyant Photonics is redefining machine perception with compact, high-performance LiDAR devices that fit in the palm of your hand. Leveraging cutting-edge silicon photonic chips, our sensors deliver unparalleled accuracy in range, velocity, and reflectivity, at a fraction of the cost of traditional LiDAR systems. By transforming high-precision sensing into an accessible technology, we are enabling new applications in robotics, autonomous systems, industrial automation, and beyond. At Voyant, we are not just building products, we are advancing an industry. Our breakthrough technology bridges the gap between research and real-world deployment, making high-performance LiDAR scalable and commercially viable. The Role At Voyant Photonics, we are redefining the future of LiDAR, and we’re looking for a visionary Vice President of Engineering to lead that charge. In this role, you’ll guide our world-class engineering and test teams as we scale from breakthrough research into structured, repeatable production, transforming innovation into reliable, customer-ready products. You will be the senior, hands-on technical leader responsible for driving the transition from prototype to mass production, ensuring our products are not only innovative but also manufacturable, reliable, and scalable. The ideal candidate combines deep technical expertise in hardware and systems engineering with a proven record of delivering precision-engineered products at scale. You have led production ramp-ups through contract manufacturing and supply chain partnerships, ideally within complex, high-performance sectors such as automotive, robotics and industrial automation, smart infrastructure, AR/VR, consumer devices, or LiDAR, but we’re open to others, too. You will lead a multidisciplinary team spanning mechanical engineering, electronics, optics, firmware, and software, while working closely with the leadership team to align technology development with business objectives. Beyond the lab, you’ll engage with customers, partners, and investors, serving as a key technical voice in shaping our roadmap and driving adoption. Your role as visionary leader and your knowledge of LiDAR technology will make a difference in the capability to bring cutting-edge innovations to the mass market. You won’t just lead engineering execution, you’ll help set the standard for an entire industry. This is a rare opportunity to build, scale, and innovate at the frontier of photonics and LiDAR technology. What we’re building has never been done before. The world has been waiting for what we’re creating, a new class of machines that can see and understand the world with unprecedented accuracy and scalability. Through our novel design and system-level innovation, we’re unlocking a future where intelligent perception is no longer a limitation, but a foundation for what comes next. Location: New York City, NY (on-site). We offer relocation assistance and are flexible in supporting your transition to New York City. Key Responsibilities * Own and drive hardware engineering across electronics, mechanical assembly, optics, and embedded systems to deliver scalable, high-performance LiDAR solutions. * Lead the transition from R&D and prototyping to full-scale mass production, ensuring reliability, cost-effectiveness, and manufacturability. * Ensure engineering deliverables are aligned with product requirements and customer needs. * Develop and implement best-in-class engineering processes, including requirements management, design validation, and rigorous product lifecycle management. * Drive system-level technical decisions on engineering tradeoffs, balancing performance, manufacturability, cost, and timelines * Build and develop a cross-disciplinary engineering team to bring a first-of-its-kind product to market * Manage production ramp-up, scaling from low-volume sample assembly to 1,000+ units per month through contract manufacturing. * Drive technical alignment with the product roadmap, balancing innovation with execution and delivery timelines. * Collaborate with leadership across product, sales, and operations to ensure alignment between technical and business objectives. Required Qualifications * 10+ years of experience leading engineering teams in hardware and software product development. * Proven track record of shipping complex electronic hardware at scale. * Experience in development, testing and validation of LiDAR sensors. * Experience in high-volume product development at an established company (consumer electronics, automotive, robotics, or similar). * Expertise in contract development and manufacturing, outsourcing and offshore supply chains. * Strong leadership skills with the ability to inspire, mentor, and grow a world-class engineering team. * Proven track record of large, multidisciplinary teams management delivering technology to mass production. * Deep technical knowledge in system architecture, hardware design, and embedded software. * Experience driving New Product Introduction (NPI) and scaling production lines. * Bachelor’s or Master’s degree in Engineering or a related field. Preferred Qualifications * Experience with high-reliability or extreme-environment design (e.g., automotive, aerospace, defense). * Familiarity with functional safety standards (ISO 26262, IEC 61508, or similar). * Background in photonics, optics, or semiconductor-based sensing technologies. * Prior experience leading engineering at an early-stage startup, scaling from prototype to mass production. Compensation & Benefits * Competitive salary and meaningful equity package * Comprehensive health benefits (Medical, Dental, Vision) * Unlimited PTO and paid company holidays * Flexible work environment (Hybrid or remote with travel) * Team events and company meetups Equal Opportunity Employer Voyant Photonics is an equal opportunity employer committed to building a diverse and inclusive workplace. We welcome applicants from all backgrounds and do not discriminate based on race, color, religion, gender, gender identity or expression, sexual orientation, pregnancy, marital or partnership status, age, national origin, citizenship, veteran or military status, disability, medical condition, genetic information, caregiver status, or any other characteristic protected by law.

Job DescriptionJob Title: Program Manager / Production Coordinator (Metals Manufacturing) Position Type: Full-time Location: Flushing, New York Salary Range: $80K + bonus Job ID#: 159104 Job Description: Job Summary Highly motivated and experienced Program Manager who will be responsible for leading and managing complex aerospace programs from inception to delivery, managing schedules, and meeting technical and contractual requirements. The candidate will be responsible for ensuring that projects are delivered on time, and to the highest quality standards. Key responsibilities include developing project plans, overseeing risk management, coordinating with engineering and manufacturing, serving as the primary liaison with customers, ensuring quality and compliance, and reporting progress to senior management. The candidate must have experience in program management, aerospace, defense, and manufacturing. Requirements • Preferably with at least 2+ years’ experience in Program Management, • Knowledge of manufacturing processes and quality control, • Excellent communication and leadership skills, • Ability to manage multiple projects simultaneously, • Strong problem-solving and analytical skills IntelliPro, a global leader connecting individuals with rewarding employment opportunities, is dedicated to understanding your career aspirations. As an Equal Opportunity Employer, IntelliPro values diversity and does not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, disability, or any other legally protected group status. Moreover, our Inclusivity Commitment emphasizes embracing candidates of all abilities and ensures that our hiring and interview processes accommodate the needs of all applicants. Learn more about our commitment to diversity and inclusivity at . Compensation: The pay offered to a successful candidate will be determined by various factors, including education, work experience, location, job responsibilities, certifications, and more. Additionally, IntelliPro provides a comprehensive benefits package, all subject to eligibility. Powered by JazzHR pfPMm13Vwc

Job Description At the direction of the Supervisor of Equipment & Testing, support the needs of production and engineering’s long term and short term goals. Coordinate, support and assists facilities maintenance personnel and managers with the setup of and maintenance with production and engineering Acceptance Test Producers (ATP) stations. Work with production test Engineers and supervisors to resolve issues with productions assembly and test stations in a timely manner. REQUISITE SKILLS REQUIRED • Conceives, designs, builds, and maintains data acquisition systems, proficient computer skills., • Conceives, designs, builds, and maintains electronic test equipment, • Conceives, designs, builds, and maintains pressurized and ultra-high-pressure test equipment., • Conceives, designs, builds, and maintains cryo-genic test equipment., • Maintains the inventory and storage of all related test and fixturing equipment., • Advanced skill (SME) in troubleshooting Industrial grade plumbing for high purity gases at ultra-high pressure., • Subject Matter Expert in advanced level troubleshooting techniques and diagnosis of test equipment. Uses analysis to make service and/or repair recommendations., • Expert in troubleshooting and the diagnosis of problems with high and ultra-high-pressure air compressors, ultra-high pressure N2 and helium compressors. Recommends solutions to management., • Expert in advanced levels of electronic troubleshooting, diagnosis, and repair., • 1 year experience Direct Current circuitry design and control, • Highschool or GED is required., • Associated Degree is preferred., • Knowledge in electronic troubleshooting, diagnosis and repair required. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job DescriptionAbout NominalNominal is building the software infrastructure powering the world’s most advanced hardware systems — from spacecraft and autonomous vehicles to next-generation industrial machines. Our platform ingests high-rate telemetry, validates complex autonomy software in real time, and enables engineers to iterate faster without sacrificing safety or precision. We’re a small, fast-moving team of engineers and operators who own problems end-to-end, work across disciplines, and thrive on challenges at the intersection of hardware and software.As a dual-use platform, we serve top-tier commercial and defense customers, including the U.S. Navy, United States Air Force, Shield AI, and Anduril. We’re backed by Sequoia, General Catalyst, Founders Fund, Lux Capital, and Lightspeed Ventures. Our team draws experience from SpaceX, Palantir, Anduril, Applied Intuition, and other leading companies — united by a common mission: enabling hardware engineers to push the boundaries of advanced technology with speed, safety, and precision.In this pivotal role, you'll deliver Nominal’s vision of providing continuous testing to the industrial base, equipping engineers to deploy capability, at scale, in the shortest time possible. You’ll be working across accounts ranging from large enterprises to innovative startups, selling a modern software platform to hardware organizations. It’ll be your role to demonstrate and communicate how our technology fits into their existing stack and helps them meet their critical testing outcomes. You will also be counted on to shape the early sales team and its culture.\uD83D\uDE80 About the role • Solution scoping & collaboration — Collaborate deeply with Sales, Mission, Product, and Engineering teams to understand customer requirements, scope feasible solutions, and align on technical feasibility., • Customer discovery & advocacy — Gain holistic insight into customer pain points and feedback to understand and quantify ways Nominal can benefit; while also helping to refine Nominal’s roadmap and messaging., • Technical pre-sales excellence — Deliver persuasive, tailored demos, PoCs, and technical presentations, effectively communicating Nominal’s platform value to C-level executives, systems architects, engineering leads, testing managers, and IT stakeholders., • Customize & prototype — Design custom demo workflows, extensions, or integrations (e.g. data ingestion pipelines, automation scripts) that showcase how Nominal delivers real-world impact across ambiguous or edge-case scenarios., • Strategic opportunities — Partner with Account Executives to build account plans, identify internal champions, and navigate complex buying processes—including IT, compliance, and financial stakeholders., • Team enablement & knowledge sharing — Co-create battle cards, talk tracks, and technical collateral. Mentor junior team members and support the evolution of Nominal’s pre-sales methodology.\uD83D\uDD0D We're looking for someone with, • Proven experience: 5–10 years in technical pre-sales, solutions engineering, or sales engineering roles at high-growth enterprise software companies, ideally with exposure to aerospace, defense, or industrial customers. You’ve consistently partnered with Account Executives to close complex, multi-stakeholder deals, and can point to examples where your technical guidance directly enabled customer adoption., • Technical fluency — You’re deeply conversant in cloud infra and analytics tooling (AWS, Azure, Databricks, Snowflake, Influx, Grafana) and can speak confidently with engineers in hardware or systems domains., • Coding & data proficiency – You have expertise in coding with SQL, Python, and Pandas, as well as familiarity with Spark, Arrow, Kafka, Beam, and Flink., • Solution-selling mastery — You’ve successfully supported sales of technical platforms—ideally (but not necessary) in aerospace, defense, industrial automation, or manufacturing—and know how to integrate technical messaging into a compelling narrative., • Collaborative & customer-obsessed — You thrive when aligning cross-functionally and building trust with customers and internal stakeholders alike., • Adaptability & ownership — You flourish in dynamic, startup-like environments and can pivot quickly in ambiguous scenarios., • Travel readiness — Willing to travel ~25-50% to visit customer sites (e.g., manufacturing floors, test facilities, cleanrooms).⚡ Skills that supercharge us, • Demo creation and delivery: Ability to develop “outside-in” demo environments that start from the perspective of a target industry or vertical, design representative telemetry data and stories that illustrate Nominal’s value in real-world contexts, and showcase hardware test scenarios in front of executive and engineering audiences. [Insert], • In-field hardware mastery: Proficiency with hardware engineering tools such as DAQs, DDS, Nix, RTOS, MCAP, H5, TDMS, LabView, MATLAB/Simulink, and WinPlot., • Technical background or degree: Background in computer science, mechanical engineering, or other heavy industry✨ Benefits/Perks, • \uD83C\uDFE5 100% coverage of medical, dental, and vision insurance, • \uD83C\uDFD6️ Unlimited PTO and sick leave, • \uD83C\uDF7D️ Free lunch, snacks, and coffee, • \uD83D\uDE80 Professional development stipend

Job Description Bacik Group is actively searching for a Senior Electrical Engineer - Medium - High Voltage Power Design - to support the FAA's Facilities Engineering Branch in Atlantic City, New Jersey. Candidate will provide expertise in the application of state-of-the-art technology to meet the mission requirements of the Customer with a primary focus on facility and site infrastructure and systems. The candidate must possess, at a minimum, a Bachelor’s degree in Electrical Engineering from an accredited college or university. Duties • Experience working on critical systems and technologies, including lightning and surge protection systems, lighting systems, electrical panels, arc flash hazards analysis, substations, switchgear, branch circuits, feeders, and transformers., • Conduct Electrical Power Surveys, • Design Electrical Modifications to buildings and equipment., • Provide estimates and support design and construction efforts., • Support the development of the electrical portion of the A/E SOW & cost estimates, design reviews/comments, progress meeting attendance, • Determine electrical loads requirements, and develop any documentation required to support the design., • Develops Scopes of Work., • Identify power panels, air conditioning units, etc. utilizing correct equipment name/designation, • Create a correct single line tracing all the electrical panels all the way up to the substation where they are connected. Identify transformer sizes, correct breaker sizes, and breaker amperage rating as well as breaker trip rating., • Gather electrical readings and add information to single line diagram. If drawings, single line diagrams, and layouts are already available, verify accuracy, correct any errors, and provide information., • Support design of Lightning and Surge Protection, Grounding, Bonding, and Shielding Requirements for Facilities and Electronic Equipment., • Communicate effectively with the FAA Electrical Engineering team and project stakeholders., • Support cable TV and internet connectivity initial installation and troubleshooting., • Identifies potential hazards and implements mitigation methods., • ·Maintains knowledge of current electrical and building codes and technologies through research and training., • ·Assures assigned projects comply with applicable codes and standards, including FAA Orders and directives., • ·Collaborates with other engineers and design professionals to create complete design packages., • ·Coordinates project activities with other agencies, contractors, utility companies, state and local government authorities, and the general public. Qualifications: • MUST HAVE a minimum of a Bachelors Degree in Electrical Engineering, • Must be eligible to work in the United States., • Must be able to obtain FAA Suitability / Public Trust Clearance Job Types: Full-time, Contract Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • 8 hour shift, • Monday to Friday Education:

Job Description Join Weiss-Aug – A Leader in Precision Manufacturing and Innovation Weiss-Aug, is a leading provider of advanced manufacturing and engineering solutions with advanced facilities across the U.S. and Mexico for over 50 years. Why Join Us?At Weiss-Aug we are driven by a commitment to excellence, innovation, and continuous improvement. As a recognized leader in the industrial and commercial sectors, specializing in high-volume metal stamping, thermoplastic molding, and value-added assembly solutions for the medical, aerospace & defense, automotive, interconnect, telecommunications and consumer goods industries, we take pride in cultivating a collaborative and forward-thinking work environment. *General Production Worker - Stamping & Molding 1st & 2nd Shift *Responsibilities:- Change and set up production reel. • Rewind production reels., • Edit reels for Quantity, Quality, etc., • Rewind interliner., • Change production totes., • Maintain clean work area., • Maintain Lot Control ticket system., • During production run, maintain sample submission to Q.C. according to Routing., • Coordinate packaging material requirements between Press Room and Warehouse., • Perform required visual checks to verify quality of product., • During production run perform gauging verification (Go – No Go gauges)., • Interface with Die Setter and Q. C. providing support functions., • Operate Power Press according to Weiss-Aug Co. Inc. standards. Requirements, • High School Diploma or equivalent., • Fluent in English. 1st Shift:Pay Range: 2nd shift: 2:00pm - 10:30pm Pay Range: $18.50 per hour plus 15% shift differential Other Benefits Include • Medical, Dental and Vision, • 401 (k) with company match, • Holiday, Vacation and Sick Time, • Tuition Reimbursement, • Health Savings Accounts (HAS), • Flexible Spending Accounts (FSA), • Cigna Wellness Incentive Program, • Employee Assistance Program (EAP), • Short Term Disability, • Group Life and Accidental Insurance, • Sun Life – Accident, Critical Illness, and Hospital Indemnity Insurance, • Smoking Cessation Program The base salary for this role will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. Weiss-Aug is an Equal Opportunity/Affirmative Action Employer. Applicants will be considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, protected veteran status, disability, or any other characteristics protected by applicable federal, state, or local law. You should be proficient in: • Machine Setups for Production Runs, • Manual Machining Skills, • High School / GED, • Experience in a Manufacturing Environment, • Injection Molding Machine (Arburg), • Punch Press, • Press Brake, • Stamping Press (Minster)

Job Description Headquartered in Totowa, NJ close to NYC. Synova is the pioneer of a revolutionary hybrid laser processing technology - Laser MicroJet®. Synova provides state-of-the-art high precision material processing in the semiconductor, aerospace, diamond, medical and defence industries. To support Synova's activities, we are looking for a: Sales Manager In this position you will: • Develop sales of our products in our established market segments and seek out new opportunities, • Develop and implement a sales plan, including forecasts to maximize profitable sales and customer satisfaction, • Manage directly all aspects of the sales process, including lead qualification, identification of customers' requirements, sample processing, quotations, closure and subsequent account development, • Plan, prioritise and execute sales activity and target account status, • Communicate Synova value proposition at conferences and at prospective customers through technical and commercial presentations For this position, we are looking for candidates with the following profile: • BSc in Engineering, • 5 years or more proven track record of selling technical capital equipment for materials processing in industrial market, • Proven track record in meeting sales goals with strong technical skills, • Excel, PowerPoint, Word and Zoho skills, • Time management and organizational effectiveness, • Flexible, ready and capable to travel up to 60% of time, • Experience with laser engineering, materials technology This position will be based in our US headquarters in Totowa. What we offer to our team: A highly motivating working environment with a dynamic team and a state-of-the-art product • 2 Weeks holiday, • Reimbursements to help pay for monthly health insurance., • Flexible working hours, • 401K matching Do you want to join our fast-growing, innovative and progressive company? If you feel that you have the qualities to make an effective contribution, please send us your complete resume.

Job DescriptionOur client is seeking a highly motivated Account Executive with a background in the aerospace industry to spearhead the business development efforts. This key role will involve formulating and implementing strategic plans to drive revenue growth within specific commercial and military aerospace sectors, both domestically and internationally. Responsibilities: • Forge and implement a detailed strategic plan to unearth and nurture opportunities unique to the aerospace sector., • Construct business cases with clear goals, including revenue benchmarks, expense forecasts, and expansion tactics., • Establish and track development objectives, orchestrate action plans, and assess the sales force’s efficacy., • Engage with various teams to synchronize efforts and realize company-wide goals., • Deepen client relationships, bolster sales support, and initiate lead generation within the aerospace domain., • Craft and present compelling sales pitches, proposals, and cost strategies., • Scrutinize market intelligence and trends to pinpoint fresh sales prospects., • A bachelor’s degree in engineering or business management; an MBA is highly regarded., • Over 5 years of high-level sales or strategic planning experience, with a decade or more in leadership roles., • Experience with DOD operations, maintenance, and contracting will be considered an asset., • Exceptional communication, presentation, and analytical abilities., • Proficiency in the MS Office suite and adeptness at interpreting financial reports., • Preparedness to travel up to 40% for business needs.Join a dynamic team and significantly impact business growth. Competitive compensation, including medical, dental, vision, and a 401k plan, is offered. Opportunity to be part of an innovative team is now open for application!

Job Description Under minimum supervision working from blueprints, sketches written and/or verbal instructions, sets up and performs the most diversified and complex progressive machining, fitting and assembly operations. Determines proper tooling and sequence of operations, and skillfully uses all machinists’ hand tools and machine shop measuring equipment in order to produce work to specifications. Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tool to be used. ESSENTIAL FUNCTIONS • Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tools to be used., • Must be able to skillfully use all machinist’s hand tools and measuring instruments., • Must be familiar with the machining of most materials., • Must be able to use advanced shop math, including trigonometry., • Moves parts to and from the work area., • Maintains good housekeeping in the work area., • Meets all safety requirements in the machine shop and follows all company policies., • Ability to operate standard and specialized equipment to produce prototype and/or production parts, • Ability to perform standard shop computations, using technical math, geometry and trigonometry., • Proficient use of set up and operation of CNC machining center., • Proficient use of tool and surface grinders, • Requires a High school diploma or equivalent education, • Requires the completion of an apprenticeship program or similar on the job experience of approximately four years or at least five years experience as a machinist., • Moderate physical activity. Salary Range:$33.63 To $48.57 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description Department: Quality Location: PTI Tech, Clifton NJ Reports To: Director of Quality Mission To uphold and advance the highest standards of quality across all stages of manufacturing—ensuring compliance with AS9100 and customer-specific requirements through robust documentation, risk management, and process validation. This role exists to proactively prevent quality issues, support internal and customer-facing investigations, and strengthen PTI’s reputation as a trusted partner for mission-critical components. Competencies – What This Person Must Be Standards-Driven: Understands and applies AS9100, ISO 9001, MIL-STD-1916 and customer-specific standards; ensures audits, validations, and ongoing operations meet all requirements. Root Cause Problem Solver: Leads investigations using 8D, 5 Whys, and Ishikawa methods to ensure sustainable corrective actions. Process Control Advocate: Uses SPC, PFMEA, control plans, and capability studies to ensure consistent, capable production. Metrics-Driven: Uses data analysis to monitor trends, reduce scrap, and eliminate recurrence of quality issues. Customer-Focused: Communicates clearly with aerospace, defense, and other high-stakes clients; drives issues to closure and delivers timely updates. Cross-Functional Collaborator: Partners with Engineering, Manufacturing, and Production teams to align on requirements, validate processes, and resolve issues quickly. Detail-Oriented: Manages documentation and compliance requirements with accuracy including FAIRs, PPAPs, CAPA records, SOPs, and quality alerts with full traceability. Self-Directed and Proactive: Takes initiative to identify and resolve quality risks without being prompted and with minimal supervision; follows through on actions with rigor and accountability. Key Responsibilities • Drive quality improvements through Gage R&R studies, Statistical Process Control (SPC), Six Sigma, and Lean Manufacturing tools., • Lead investigations into internal and external quality issues; document findings and ensure timely resolution., • Perform root cause analysis using structured problem-solving methods (8D, 5 Whys) and verify the effectiveness of corrective and preventive actions (CAPA)., • Coordinate timely responses to Supplier Corrective Action Requests (SCAR), Non-Conformance Reports (NCR), customer complaints, and quality-related queries., • Prepare and maintain First Article Inspection Reports (AS9102), Production Part Approval Process (PPAP-AS9145) documentation, and validation (IQ/OQ/PQ)., • Lead risk assessments (PFMEA) and develop control plans to mitigate quality risks., • Track and analyze defects and scrap data to identify trends and prioritize corrective actions., • Collaborate with manufacturing and engineering to improve processes and define inspection criteria., • Own inspection processes, including CMM (Zeiss – Calypso), OGP, and Keyence programming, as well as inspection fixture design (SolidWorks preferred)., • Oversee QC personnel training in partnership with manufacturing engineering to establish visual standards and develop work instructions., • Maintain SOPs, work instructions, inspection procedures, and training logs in compliance with AS9100., • ≥ 98% Quality Shipments, • ≥ 90% Gage R&R Pass Rate, • ≥ 1.33 Cpk for Stable Processes, • ≤ 3% Internal Scrap Rate on assigned processes, • ≥ 95% CAPA Effectiveness, • ≥ 95% On-Time Submission of FAIRs, PPAPs, SCAR’s, and CAPA’s, • Bachelor’s degree in Mechanical, Manufacturing, or a related Engineering field, • 3–5+ years of quality engineering experience in injection molding or precision manufacturing, • Working knowledge of AS9100, ISO 9001, and MIL-STD-1916, • Experience with FAIR, PPAP, SPC, PFMEA, control plans, and CAD (SolidWorks preferred), • Proficiency in statistical tools (Minitab, JMP, Excel) and QMS/ERP systems, • ASQ Certified Quality Engineer (CQE) or Six Sigma certification, • Experience in the defense, aerospace, or medical device industries, • Hands-on inspection experience, including CMM, optical, or non-contact methods, • Ability to stand and walk on the production floor for extended periods, • Capable of lifting up to 40 lbs and accessing production and inspection equipment, • Manual dexterity for handling tools, parts, and inspection equipment, • Visual acuity sufficient to read prints, inspect parts, and identify quality defects, • Manufacturing facility with exposure to injection molding machines, CNC equipment, and secondary operations, • Requires use of PPE, including safety glasses, gloves, and hearing protection, • Frequent collaboration with production, maintenance, and engineering teams on the floorCompany DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it. PTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Engineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it.\r\n\r\nPTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated magnet engineers to join its rapidly growing team. The magnet engineering roles will design, build, and test high temperature superconducting (“HTS”) magnets. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems. Key Responsibility Areas: • Rapidly design, build, and test HTS magnets, • Develop specifications for magnets based on system design and performance goals, • Optimize magnet design and run analysis using Multiphysics simulation software (e.g. Ansys EM, Structure, COMSOL, etc.), • Develop design tools, data analysis software, and algorithms using Python or similar, • Incorporate design for manufacturing principles and support first builds, • Produce design specifications and collaborate with vendors to get quotes and deliver hardware that meets qualifications, • Support the implementation of tooling and manufacturing, • Design and execute magnet testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Experience with magnets, cryogenics, vacuum systems, or transformer design, • Experience in design using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience with Ansys and/or COMSOL, • Experience specifying machining, welding, and fabrication requirements, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in physics, computer science, electrical engineering, mechanical engineering, materials engineering, or related fields, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $110,000-$180,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options