Trabajos aerospace engineering en Norfolk, VirginiaCrear alertas

Job DescriptionDescription: Job Title: Quality and Safety Manager Classification: Full-time, Salaried Exempt PRIMARY Location: Kymera – Thermal Spray Solutions (TSS), Chesapeake, VA, with remote support for Kymera CASL in Houston, TX. Reports To: General Manager Location: Onsite - Chesapeake, VA Office, with 25% Travel to US & Intl. work sites. (*Relocation assistance available for qualified candidates). Job Overview The Quality and Safety Manager (Multi-Site) is responsible for leading, standardizing, and continuously improving the corporate Quality Management System (QMS) and safety programs across multiple operational locations, including shipboard and machine shop environments. This role ensures consistent implementation of quality systems and safety standards across all sites, both local and remote. The position oversees audits, non-conformance management, and corrective actions across geographically dispersed operations, while partnering with site leadership to drive compliance, performance, and continuous improvement. The role requires domestic and international travel, a valid driver’s license, U.S. citizenship or residency (ITAR compliance), and the physical ability to access Navy ship work environments. Key Responsibilities Multi-Site Quality Management System Leadership • Lead, standardize, and maintain corporate Quality Management Systems aligned with ISO 9001, AS9100, QP1, and QP6 requirements across all locations., • Ensure consistent implementation, compliance, and continuous improvement of all applicable quality standards across domestic and international sites., • Develop, maintain, and control quality documentation, ensuring alignment and accessibility across all locations., • Establish standardized processes for managing product quality records, customer complaints, audits, corrective actions, and preventive actions., • Coordinate and oversee internal audit programs across all sites, ensuring timely resolution of findings and non-conformances., • Lead preparation and execution of third-party and customer audits, including those related to ISO, aerospace, and SSPC/AMPP (QP1/QP6) certifications., • Oversee company-wide corrective and preventive action systems, ensuring effectiveness and consistency., • Manage and standardize calibration programs across all locations., • Analyze quality trends across sites, identify systemic issues, and implement enterprise-level improvements., • Oversee and standardize safety programs across all locations, ensuring compliance with local, state, federal, and international regulations., • Ensure consistent implementation of safety policies, procedures, and reporting systems across multiple job sites., • Manage customer-required safety and environmental reporting across all applicable locations., • Partner with site leadership to develop and maintain environmental, health, and safety (EHS) programs., • Support and coordinate HSE initiatives across geographically dispersed teams., • Oversee third-party safety training programs and ensure consistent recordkeeping across all sites., • Lead and develop a team of 8 direct reports, ensuring alignment across multiple locations and functions., • Serve as a central resource and subject matter expert for ISO 9001, AS9100, QP1, and QP6 standards across the organization., • Influence and mentor employees at all levels, promoting a unified culture of quality, safety, and accountability across locations., • Drive cross-site collaboration, knowledge sharing, and best practice standardization., • Lead root cause analysis, corrective action implementation, and follow-up across multiple operations., • Champion continuous improvement initiatives and support lean methodologies across all sites. Perform other duties as assigned. This role supports a dynamic, multi-site organization where responsibilities may evolve based on operational needs. Benefits Summary: *Relocation assistance available for qualified candidates. At Kymera International - Thermal Spray Solutions, we provide a competitive benefits package to support your health, well-being, and financial security, including: • Generous Time Off: 11 annual company-paid holidays and flexible PTO., • Healthcare Savings: Flexible Spending Accounts (FSA), Health Savings Accounts (HSA), and comprehensive dental and vision coverage., • Retirement Support: 401(k) plan with a competitive company match., • Insurance Coverage: Company-paid short-term disability and life insurance, with additional voluntary options like critical illness, hospital care, and long-term disability coverage., • Competitive pay. Experience & Qualifications • Minimum of 5 years of experience with ISO 9001, AS9100, QP1, and/or QP6 standards, including implementation, maintenance, and auditing in a multi-site environment., • Minimum of 5 years of quality management experience in a manufacturing, industrial, or shipyard environment., • Demonstrated success leading multi-site quality systems and safety programs, including audits, system implementation, and continuous improvement initiatives., • Experience with SSPC/AMPP coating and inspection standards (QP1/QP6) strongly preferred., • Proven experience managing and influencing cross-functional and geographically dispersed teams., • Strong leadership, coaching, and change management capabilities., • Excellent written and verbal communication skills., • Proficiency in Microsoft Office and familiarity with statistical analysis tools., • Ability to access government and military facilities, including obtaining DBIDS credentials and necessary clearances., • Must meet ITAR requirements as a “U.S. Person” (U.S. citizen, lawful permanent resident, or protected individual)., • Valid U.S. driver’s license and passport required., • Post-secondary education in Engineering, Safety Management, or related field (or equivalent experience)., • Ability to Travel (25%): Frequent travel is required, including international travel, to visit and oversee operations at various remote work sites.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. The primary responsibility of this position is to set up and operate a Flow & OMAX Waterjet machine. Must understand, operate, and maintain the waterjet machine including any support equipment required to accomplish assigned tasks. This position also requires completing documentation properly and housekeeping of the area. This role supports Oceaneering's Marine Services Division (MSD) and is located in Chesapeake, VA. Travel is not expected or required. • Set up and operate both Flow Waterjet and OMAX Waterjet cutting systems to produce components in accordance with drawings, specifications, and work instructions., • Interpret technical drawings, models, and technical work documents to ensure parts are cut with appropriate tolerances, edge quality, and stock allowance to support downstream machining operations., • Perform complete machine setup including material loading, fixturing, nozzle alignment, abrasive loading, pump startup, and verification of cutting parameters., • Program, edit, and troubleshoot cutting programs at the machine as needed (including modifying DX files, tool paths, lead-ins/outs, kerf compensation, and quality settings) to support production flow and reduce backlog., • Select and verify correct materials and thickness prior to cutting; adjust machine parameters accordingly., • Perform in-process and final inspections using Precision Measuring Instruments (PMI) including calipers, micrometers, scales, and other measuring devices to ensure dimensional compliance., • Accurately complete all required production and inspection documentation, • Perform routine preventative maintenance on waterjet systems including pump inspections, nozzle/orifice replacement, abrasive system maintenance, filter changes, and general equipment upkeep., • Troubleshoot minor equipment issues and coordinate with maintenance personnel as required., • Maintain a clean, safe, and organized work area in accordance with company safety and housekeeping standards., • Support production priorities and collaborate with machinists and programmers to ensure parts are optimized for downstream machining operations., • Follow all safety procedures related to high-pressure waterjet systems and abrasive materials. REQUIRED: • High school diploma or equivalent, • Minimum three (3) years' experience operating CNC waterjet cutting systems, preferably Flow and/or OMAX equipment., • Experience using Precision Measuring Instruments (PMI) for in-process and final inspection., • Ability to read and interpret engineering drawings, blueprints, and technical specifications., • Working knowledge of CNC programming with the ability to edit and adjust programs at the machine., • Strong understanding of tolerances and how waterjet cutting impacts downstream machining operations., • Mechanical aptitude with ability to perform routine maintenance and basic troubleshooting., • Ability to complete production and inspection documentation accurately., • Journeyman-level Inside Machinist or equivalent trade experience., • Experience supporting precision machining operations., • Must have excellent oral and written communications skills., • Ability to rely on experience and judgment to plan and accomplish goals., • Ability to successfully reach company goals in an environment in which a wide degree of creativity and latitude is required., • Ability to represent MSD in a positive manner while adhering to the organization's core values. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. The Engineer IV applies advanced technical knowledge to Oceaneering's Marine Services Division's (MSD) engineering and design activities. This role is located in Chesapeake, VA. The Engineer IV provides technical leadership and oversight for large and/or complex projects under the direction of a Project Manager. This role assists the Design Engineering Manager and Project Manager in defining and managing resource requirements, schedule, and cost for projects under his/her cognizance. The Engineer IV interacts with other MSD personnel including those in QA, Manufacturing, Purchasing, Shipping and Receiving, as necessary to provide engineering support to MSD manufacturing, integration, and test activities. They direct an engineering design/production team in development of a design project/production availability throughout the entire cycle from initial concept/planning through successful completion. They complete assigned engineering projects in accordance with customer specifications and within schedule and budget limitations through coordinating activities of engineering team, contractors, and vendors. This role may require up to 25% travel. • Independently perform difficult engineering tasks to completion that may include a variety of complex features, conflicting design requirements, unusual materials requirements, and the need to coordinate the work of others., • Exhibit excellent technical judgment, and appreciable independent evaluation, creativity, and latitude in making decisions., • Demonstrate ability to devise innovative solutions to problems., • Develop objectives, schedules, and estimates for difficult assignments., • Direct and supervise the activities of moderate to large size teams of engineers, tech writers, designers, and drafters., • Review progress and evaluate results of work accomplished by self and others., • Interact with customer technical representatives to define and manage customer expectations., • Use team management skills to lead the design engineering group during various phases of a project or availability., • Assess vendors for competence, capabilities, and resources., • Review/approve Engineering Work Packages (e.g. TGIs) related to project., • Review/approve Engineering Change documents (e.g. CRs, LARs, DFSs) related to project., • Review/approve Engineering designs, models, drawings and calculation packages., • Candidate will have to perform in an ISO-9000 rated company in a rapidly changing and demanding atmosphere., • May assist in or lead Bid and Proposal efforts including cost estimating, technical approach definition, and input to baseline schedule data., • May participate in or lead Technical Working Groups to assess and improve processes and capabilities. REQUIRED: • Bachelor's degree in Engineering (Mechanical, Electrical, Ocean or Nuclear) or Naval Architecture from accredited college or university., • Minimum ten (10) years engineering experience in complex systems design, manufacturing, and integration environment., • Demonstrated ability to lead technical groups of more than five engineers, designers, and/or drafters., • Familiarity with ISO 9000 design requirements., • Proficiency in Microsoft Office products and CAD software, such as AutoCAD or SolidWorks or similar packages., • Master's degree in related field., • Proficiency in MathCad., • Engineer in Training (passed FE exam)., • Excellent communications and organizational skills., • Understands Finite Element Analysis -particularly Solidworks Simulation or ANSYS Workbench. Working knowledge of both is preferrable., • Must be competent in system engineering methodologies., • Experience performing Dynamic Design Analysis Method (DDAM) is a plus., • Demonstrated knowledge of SUBAFE or SOC requirements is preferred., • Possesses and applies an advanced knowledge of engineering principles and practices in one or more engineering fields., • Possesses a working knowledge of the manufacturing/integration aspects related to one or more technical fields related to MSD efforts., • Demonstrated knowledge of military, and commercial, construction and material specifications applicable to Submarine and Deep Submergence System work. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. We are seeking a detail-oriented and highly organized Production Controller to support a dynamic manufacturing facility that produces complex, mission-critical components for both submarine new construction and submarine overhaul programs. This role is vital to ensure timely, efficient, and coordinated execution of manufacturing activities across multiple high-priority defense projects. This position is based at Oceaneering's Marine Services Division (MSD) in Chesapeake, VA. Travel may be required up to 5% of the year. PRODUCTION COORDINATION: • Maintain, review, track, and prepare for certification of Task Group Instructions, Condition Reports, Manufacturing Work Request, • Forms (MWRF) and all other technical work documents., • Manage and schedule work orders to support both new construction and overhaul programs., • Monitor work-in-progress (WIP), resolve workflow bottlenecks, and ensure timely completion of manufacturing tasks., • Interface daily with Manufacturing, Engineering, Quality, Supply Chain, and other departments or organizations to maintain alignment and support assigned projects., • Troubleshoot and resolve production and technical issues., • Collaborate with cross-functional teams to secure cooperation and approval for actions and solutions., • Interpret production processes and job-related information for team members., • Assist Project Manager(s) with a variety of details associated with materials, schedules, and resource availability., • MWRF Process Management:, • MWRF: the formal mechanism used by overhaul project teams to initiate manufacturing support for submarine refit and maintenance work., • Serve as the central point of contact for all MWRFs initiated by submarine overhaul, DDS, and New Construction Project teams., • Review MWRFs for accuracy, completeness, and priority alignment., • Track and report production status, material availability, and shop priorities to project stakeholders., • Support the timely fabrication and delivery of components critical to overhaul, DDS, and new construction schedules., • Work with project managers and project engineers to communicate delays or issues and help develop mitigation strategies., • Assist with preparing and reviewing quotations., • Coordinate manufacturing schedules with Project Managers to optimize machine and personnel utilization., • Drive and support process improvements to enhance efficiency in both the Machine Shop and Fabrication Shop., • Maintain accurate documentation and ensure compliance with internal procedures and quality standards., • Contribute to continuous improvement initiatives and process documentation refinement., • Other duties as assigned. REQUIRED: • High School/GED and additional administrative vocational courses., • Minimum eight (8) years working in a manufacturing environment., • Completion of vocational administrative courses., • Ability to effectively communicate with personnel within the company. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Develop procurement solutions to problems of unusual complexity that require a high degree of ingenuity, creativity, and innovation. Prepares Request for Quote/Proposal documentation and correspondence; analyzes and evaluates vendor responses to request for quote/proposal; performs price analysis; negotiates pricing, provisions and terms and conditions; performs supplier assessments and source selection; prepares and issues Purchase Order awards; administers and performs purchase order closeout; prepares and maintains required documentation for procurement files. Works closely as a member of an integrated team comprised of Purchasing, Contracts, Engineering, Quality and Program Management personnel; assists with defining requirements, conducting market research, and identifying sources. Ensures compliance with applicable federal, state and local laws and regulations (i.e., FAR / DFARS), and company policies and procedures. • Develop and maintain professional business communication and relationships with vendors and subcontractors.\, • Supports the Purchasing Manager to ensure the purchasing team adheres to the purchasing policy and work instructions., • Supports the Purchasing Manager to Supervise staff to include interviewing, hiring, and training employees, planning, assigning, and directing work, appraising performance, rewarding and disciplining employees, addressing complaints and resolving, • Review and approve all orders in compliance with the limits of authority set by management., • Coordinate with the Program staff to ensure material and service needs are met., • Resolve issues and conflicts with vendors in accordance with results from Non-Conformance Review Boards or Purchase Order (PO) terms and conditions., • Develop and execute procurement plans for outsourced manufacturing services (i.e., special components and replacement / repair items) for subsea applications., • Possess strong knowledge of procurement from both the Naval Supply System and commercial vendors., • Assist Project Managers with investigating material cost, availability and lead time and preparing data/information (e.g., shipping costs, expediting charges, etc.) required for the Job Material List (JML). Attempt competitive quoting regarding materials and services., • Prepare and monitor MILSTRIP requisitions for acquisition of material through the Navy supply system., • Prepare and monitor Reports of Discrepancy (RODs), Quality Deficiency Reports (QDRs), Vendor Feedback Reports for non-conforming material and/or services., • Assist the Purchasing Manager with preparing weekly reports of outstanding purchases., • Identifies primary and alternate sources for each item needed and encourages suppliers to remain competitive to achieve best value (quality, lead time, parts and service)., • Strong ability to source non-standard or highly customized material with multiple suppliers concurrently., • Review and assist with the development of Statements of Work., • Identify risks and opportunities, perform risk analysis, and develop mitigation plans for subcontracted services., • Participates in make or buy analysis., • Manage and resolve supplier performance issues with non-conforming material and/or services., • Execute all aspects of the subcontract/purchase order process from cradle to grave., • Negotiate and obtain best pricing for outsourced manufacturing services, and other services including transportation agreements and rentals., • Document and complete procurement files to include price/cost analysis, source determination, and price reasonableness to ensure compliance with Contractor Purchasing System Review (CPSR) requirements., • Reconcile vendor invoices and ensure they are correct for work completed and payments are in accordance with the agreed upon terms., • Communicate effectively with all members of the integrated team., • Perform other duties as assigned. REQUIRED: • (8) years purchasing or related experience or related experience., • Have a thorough understanding of all FAR/DFAR/NFAR clauses as related to procurement practices and guidelines (RFQ,, • Price/Cost Analysis, Sole Source, DPAS, Debarment, etc.), • Experience with various federal subcontract types including Firm Fixed Price, Time and Material, Labor Hour, and Cost Plus., • Strong ability to work in a high-paced environment, prioritize and meet deadlines., • Personal computer skills and proficiency with Microsoft Office Word and Excel., • Bachelor's degree in business, Supply Chain Management, Engineering, or related field., • Purchasing and/or Contracts Professional certification (e.g., NCMA, ISM, APS)., • DOD/US Navy supply and procurement system experience., • Experience with development articles and prototypes, prime mission equipment, spares, support equipment and site support., • Must be a US citizen and have ability to obtain/maintain a DoD security clearance. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. ESSENTIAL • Develop and apply advanced engineering analytical and design methods, theories and research techniques, to complex engineering projects., • Coordinate and supervise a team of engineers, designers, drafters, technical writers, and technicians., • Review progress and evaluate results of work accomplished by self and others., • Technically manage projects of moderate scope., • Estimate resource requirements to meet technical and scheduling objectives., • Review and approve the completion and implementation of technical products to meet the customer requirements., • Demonstrate excellent technical judgment, independent evaluation and innovative solutions to problems., • Write test procedures, conduct tests, compile and evaluate test data, and complete required documentation., • Interact with customer representatives to define and manage customer expectations., • Participate in Technical Working Groups to assess and improve ADTECH processes and capabilities., • Assist in bid and proposal efforts by providing cost estimations, technical approach definitions, and input to baseline schedule data., • Domestic and international travel, including shipboard operations., • Additional duties as assigned. REQUIRED • Bachelor of Science degree in Mechanical Engineering or Equivalent experience, from an accredited institution., • 5-10 years of practical technical experience in the engineering process, including concept development, analysis, design, drawing, integration and testing of complex mechanical and/or ocean deployed systems., • 2 or more years of management experience leading multidisciplinary design teams., • Responsible for producing significant portions of individual project mechanical designs, • Demonstrated ability to lead technical groups and interact with customer representatives., • Proficiency in the application of current engineering software (i.e. SolidWorks, ANSYS, Matlab, etc), and Microsoft Office, • Able to apply an advanced knowledge of the principles, practices and procedures of mechanical engineering and an understanding of related engineering fields., • Work closely with electrical, software, and systems engineers, as well as other cooperative disciplines, to solve problems and constructively architect a working system., • Responsible and accountable for your results, working with considerable autonomy, but also knowing when to ask for assistance., • Ability to obtain a United States Government Department of Defense Security Clearance (active clearances preferred, but not prerequisite), • Must be a US Citizen., • Desire to stretch and expand your talents, expertise, competency, and responsibilities. DESIRED • Advanced degree in Mechanical Engineering, Ocean Engineering or a related field, from an accredited institution., • Exercise excellent technical judgement, creativity, and initiative with attention to detail consistently throughout your work product, with awareness of the "system" perspective., • Strong communication, organizational and technical writing skills, including ability to effectively document, convey, and present engineering concepts and products to team members and customers., • Knowledge and/or experience in the marine industry, fielding Ship Board systems and associated technologies., • Hands-on abilities for assembling mechanical components. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. We are seeking a skilled and dynamic Project Manager II to lead and manage Dry Deck Shelter (DDS) projects, contracts, and task instructions using accepted project management techniques and company policies and procedures to achieve success. This role offers an opportunity to provide leadership and guidance to members of the Production team and project support groups, while simultaneously partnering with department leaders to resolve issues concerning quality, delivery schedules, costs, and more. Travel may be required up to 10% of the year. • Provide assistance for the preparation of bids and quotes for delivery orders, purchase orders and contracts. Assist with the preparation and submission of proposals, reviewing technical content, personnel requirements, management plans and execution costs., • Monitor assigned projects/contracts and conduct periodic visits (daily, if feasible) to job sites and ensure the customer is satisfied. Work closely with the respective department managers to monitor the task performance and efficient utilization of resources., • Oversee a production team that contains supervisor(s) and various trades., • Track Project performance with respect to budget, schedule, and quality using Earned Value Analysis, and phase review objectives; communicate performance to senior management., • Manage project risks through identification and mitigation of preventable, strategic, and external risks., • Provide feedback and coaching regarding employee performance., • Assist with some facets of services and products marketing; i.e., devising and implementing strategies, conducting presentations, interfacing with field representatives, etc., • Assist with implementation of the company's short-range and long-range business ventures. Identify and develop marketing and business plans for targets of opportunity that fall within the capabilities of the organization., • Make recommendations for new processes where they may improve quality and organization effectiveness., • Maintain personal contact with key personnel (military and civilian), companies and organizations which may utilize company services or may be candidates for teaming proposals on a specific contract. Develop personal rapport with each contact, which will enhance the possibility of repeat business., • Promote existing customer relations through support in evaluating new quotations and the monitoring of on-time deliveries and product quality. Advise, consult and/or counsel contacts and customers to gain cooperation and acceptance of ideas and actions., • Project positive image (to include personal attire, mannerisms, language, technical competence, etc.) to employees, customers and similar industrial companies by ensuring a cost-efficient, quality product is produced in accordance with the customer's requirements., • Strong analytical and personnel management skills required to clearly communicate and coordinate team efforts and interact with other departments and outside agencies., • Act as Supervisor/Production Manager on an as need basis, as directed by the DDS Program Manager., • Additional duties as assigned. REQUIRED: • High School diploma/GED., • Five (5) years of military training and experience in hull, mechanical and/or electrical systems, or five (5) years of experience managing/supervising DDS Production Projects., • Minimum of three (3) years of specialized experience in performing DDS/SOC work or five (5) years performing SUBSAFE/Level I Material work., • Minimum of four (4) years of experience in design, operation, maintenance, repair, testing installations or alterations of Naval Ship's Hull and Deck Machinery Systems and Equipment., • Minimum of three (3) years of management/supervisory experience., • Minimum of (3) years' experience managing the financial aspects of multiple types of Government contracts such as fixed price, cost reimbursable, incentive fee, award fee, and/or time & material., • Must be a U.S. citizen who is not a dual citizen of any other country., • Demonstrated working knowledge of Navy data systems, and knowledge of Navy procedures for establishing and maintaining equipment maintenance requirements., • Demonstrated experience enforcing compliance with the Federal Acquisition Regulations (FAR) and the Cost Accounting Standards (CAS)., • Demonstrated ability to meet schedule and budget goals., • Demonstrated proficiency in all Microsoft Office applications (i.e. Excel, PowerPoint, Word, etc.). PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Oceaneering's Marine Services Division (MSD) is seeking a highly skilled Inside Machinist with CNC programming, setup, and machining expertise to support the manufacturing of complex, critical submarine components in a low-volume, build-to-print environment. This role requires mastery of machining principles, precision measurement, and blueprint interpretation. Unlike high-volume "widget" machining shops, our work consists of one-off and non-repeat builds with tight tolerances, exotic alloys, and high-quality standards that directly support the U.S. Navy submarine fleet. This role does not require travel but may require overtime. CNC PROGRAMMING & SETUP: • Review, edit, and optimize CNC programs (lathe and mill) using G-code and CAM platforms., • Set up, align, and secure workpieces, fixtures, and tooling on CNC and manual machines., • Perform the setup and operation of a wide range of equipment including lathes, mills, grinders, saws, and related shop machinery., • Machine complex components from materials such as HY-80, HY-100, stainless steel, Inconel, and other submarine-grade alloys., • Select the correct speeds, feeds, tooling, accessories, and cutting methods to achieve required tolerances and surface finishes., • Read, interpret, and execute machining work using complex blueprints, drawings, manuals, GD&T callouts, and technical work documents., • Inspect, measure, and verify machined features using OD/ID micrometers, height gauges, depth gauges, calipers, verniers, dial indicators, lay-out tools, and other precision metrology equipment., • Accurately record measurements, readings, and inspection data to ensure compliance with critical tolerances., • Adhere to stringent submarine and Navy quality standards, including tight tolerances, high-accuracy fits, and critical surface finishes., • Follow all company, OSHA, and NAVSEA safety and cleanliness requirements., • Support continuous improvement in tooling, fixturing, machining methods, and program efficiency. REQUIRED: • High School Diploma/GED, • Minimum eight (8) years' experience machining complex submarine, aerospace, defense, nuclear, or similarly critical components in a precision or defense manufacturing environment., • Ability to develop new programs or machining strategies across manual and/or CNC machines., • Ability to perform advanced setups, optimize tool paths, and improve setup instruction sheets on multiple machines., • Ability to operate both CNC and manual machine tools, develop fixturing and processes, and troubleshoot issues without supervision or guidance., • Able to read, interpret, and evaluate advanced blueprints, drawings, GD&T, and technical specifications for manufacturability without supervision or guidance., • Ability to perform multi-axis machining operations (e.g., 4-axis or 5-axis mills) as applicable., • Demonstrated working knowledge of shop math (e.g. convert between decimals and fractions, adding and subtracting decimals and fractions, basic trigonometry used for layout and measurements, etc.)., • Ability to perform First Article Inspections and resolve issues to make sustainable quality improvements., • Demonstrated knowledge and proficiency in machining practices for tight-tolerance, critical components., • Demonstrated proficiency using precision measuring instruments and accurately documenting measurements., • Ability to work independently, problem-solve, and train others., • Experience with exotic alloys and challenging machining conditions., • Familiarity with NAVSEA or military specifications., • CAM software experience (Mastercam, SolidWorks, etc.)., • Demonstrates high attention to detail and exhibits technical excellence and leadership qualities to drive culture of continuous improvement., • Strong communication skills with a collaborative mindset., • Ability to act as a liaison between supervision and other departments, such as Quality or Engineering., • Adaptable and resourceful - able to plan work and think critically in a one-off production environment., • Willingness and ability to train less experienced Inside Machinists to support a culture of continued learning and growth., • Leads by example; prioritizes and models safety culture and assists in reviewing cleanliness of work area. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: • Primarily indoors during the day and occasionally at night., • May require working on or near moving equipment and vibrating equipment., • May be exposed to intense light from welding operations., • Occasional exposure to open fire/flames/sparks from welding and grinding operations., • Depending on the location, may require working in hot, humid conditions (above 90 F degrees) or cold (below 32 F degrees) temperatures. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT • Lift 20-50 pounds., • Work in confined spaces, kneel, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands., • Identify color differences., • Lift 10-25 pounds., • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects., • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead., • Operate a motor vehicle., • Lift up to 10 pounds., • Wear PPE protection as required for the conditions., • Be able to recognize and react to alarms. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. The Quality Certifier will play a critical role in ensuring adherence to the Quality Assurance (QA) programs for Submarine, Deep Submergence, and Surface Ship Systems at Oceaneering's (OII) Marine Services Division (MSD) in Chesapeake, VA. This position requires a thorough understanding of all related QA processes and associated documentation. The Quality Certifier will be responsible for enforcing compliance with directives, technical specifications, higher authority documents, and the OII-MSD QA Manuals, as well as local instructions. Familiarity with Technical Work Documentation (TWD) requirements is essential. Candidates must possess strong analytical and management skills, with the ability to assess complex issues and ensure quality standards are met without exception. Occasional travel and overtime may be required. • Foster a "first-time quality" culture in all production aspects to ensure the highest-quality final product., • Oversee and execute a comprehensive Certification program, including final certification procedures., • Ensure certification reviews are conducted only by qualified personnel, as required., • Certify all relevant Objective Quality Evidence (OQE) for assigned projects., • Stay informed about the status of all Condition Reports, Unrestricted Operations/Hull Integrity Procedures, LARs, and DFSs related to assigned projects., • Provide input to the central Quality database to assist in analyzing collected quality data., • Participate in Internal SUBSAFE Certification Audits and DSS-SOC Certification Surveys as directed., • Lead internal audits and surveillances of OII-MSD processes and production work to ensure consistency in reporting., • Serve as the primary Quality Assurance contact during the certification of Technical Work Documents (TWD)., • Make informed decisions regarding production quality and safety, providing data for top management to base critical corporate decisions., • Enhance safety through training, raising employee awareness, enforcing safety policies, and holding individuals accountable for poor safety practices., • Act as the senior QA team member for assigned projects., • Maintain objectivity when performing quality assurance tasks related to shipboard repairs or installations., • Demonstrate a thorough understanding of current NAVSEA, DDS-SOC, SUBSAFE, and Level 1 requirements., • Maintain an expert knowledge of contractor processes that impact DDS-SOC, SUBSAFE, and Level 1 directives., • This person may perform other special projects or duties as required to support business needs such as:, • MOA Comprehension., • QA-11 REC Log Maintenance., • REC Maintenance., • Understand of project REC progression., • Certification of Compliance Drafting., • Proper record retention., • Act as senior QA project team member when assigned to projects. REQUIRED: • Graduate of high school, trade or industrial school, or GED equivalent., • Minimum five (5) years' experience in performing quality assurance and control inspection on naval ship Hull, Mechanical,, • Electrical, Electronic, Ordnance systems for specification and engineering drawing requirement compliance., • Minimum seven (7) years' shop experience that has provided practical knowledge of quality assurance programs, quality inspection, • systems, and machining skills and a detailed knowledge of shop procedures, processes, methods and techniques., • Minimum seven (7) years' experience in performing quality assurance and control inspection on Naval Ship Hull, Mechanical,, • Electrical, Electronic, Ordinance Systems for specification and engineering drawing requirement compliance. This includes specialized experience in inspecting work on SUBSAFE and Level I systems/components as required by the organizational certification by Commander Naval Sea Systems Command., • In depth working knowledge of Submarine Safety (SUBSAFE), Deep Submergence Systems (DSS), NAVSEA Standard Items and NSWCPD process and procedural requirements., • Must be a U.S. citizen who is not a dual citizen of any other country., • Bachelor's degree in Mechanical, Electrical or Systems Engineering., • Experience at Naval and/or Commercial Shipyards with extensive Apprenticeship Program., • Extensive military training and experience in mechanical, electrical, and/or ordinance systems and quality assurance/control requirements., • Five (5) years' experience in submarine, deep submergence, and surface ship systems repair, QA administration, or technical knowledge and at-sea operational experience with submarine and/or surface combat weapons systems, launcher systems or other similar Naval or military system including an in-depth working knowledge of U.S. Navy Joint Fleet Maintenance Manual and associated documentation., • Five (5) years' experience as a SUBSAFE QA inspector. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Oceaneering's Marine Services Division (MSD) is seeking a highly skilled Inside Machinist with CNC programming, setup, and machining expertise to support the manufacturing of complex, critical submarine components in a low-volume, build-to-print environment. This role requires mastery of machining principles, precision measurement, and blueprint interpretation. Unlike high-volume "widget" machining shops, our work consists of one-off and non-repeat builds with tight tolerances, exotic alloys, and high-quality standards that directly support the U.S. Navy submarine fleet. This role does not require travel but may require overtime. CNC PROGRAMMING & SETUP: • Review, edit, and optimize CNC programs (lathe and mill) using G-code and CAM platforms., • Set up, align, and secure workpieces, fixtures, and tooling on CNC and manual machines., • Perform the setup and operation of a wide range of equipment including lathes, mills, grinders, saws, and related shop machinery., • Machine complex components from materials such as HY-80, HY-100, stainless steel, Inconel, and other submarine-grade alloys., • Select the correct speeds, feeds, tooling, accessories, and cutting methods to achieve required tolerances and surface finishes., • Read, interpret, and execute machining work using complex blueprints, drawings, manuals, GD&T callouts, and technical work documents., • Inspect, measure, and verify machined features using OD/ID micrometers, height gauges, depth gauges, calipers, verniers, dial indicators, lay-out tools, and other precision metrology equipment., • Accurately record measurements, readings, and inspection data to ensure compliance with critical tolerances., • Adhere to stringent submarine and Navy quality standards, including tight tolerances, high-accuracy fits, and critical surface finishes., • Follow all company, OSHA, and NAVSEA safety and cleanliness requirements., • Support continuous improvement in tooling, fixturing, machining methods, and program efficiency. REQUIRED: • High School Diploma/GED., • Minimum five (5) years' experience machining complex submarine, aerospace, defense, nuclear, or similarly critical components in a precision or defense manufacturing environment., • Demonstrated proficiency in programming, reviewing, or editing CNC programs (lathe and mill)., • Ability to perform advanced setups, optimize tool paths, and improve setup instruction sheets., • Ability to operate both CNC and manual machine tools without supervision or guidance., • Ability to perform multi-axis machining operations (e.g., 4-axis or 5-axis mills) as applicable., • Able to read and interpret advanced blueprints, drawings, GD&T, and technical specifications without supervision or guidance., • Demonstrated working knowledge of shop math (e.g. convert between decimals and fractions, adding and subtracting decimals and fractions, basic trigonometry used for layout and measurements, etc.)., • Ability to perform First Article Inspections and resolve dimensional issues to meet and exceed quality standards., • Demonstrated knowledge and proficiency in machining practices for tight-tolerance, critical components., • Demonstrated proficiency using precision measuring instruments and accurately documenting measurements., • Ability to work independently from minimal instructions and drive work through completion., • Experience with exotic alloys and challenging machining conditions., • Familiarity with NAVSEA or military specifications., • CAM software experience (Mastercam, SolidWorks, etc.)., • Demonstrates high attention to detail and quality craftsmanship., • Strong communication skills with a collaborative mindset., • Ability to collaborate effectively with individuals in other departments, such as Quality or Engineering., • Adaptable and resourceful - able to plan work and think critically in a one-off production environment., • Willingness and ability to train less experienced Inside Machinists to support a culture of continued learning and growth., • Prioritizes and models safety culture and assists in reviewing cleanliness of work area. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: • Primarily indoors during the day and occasionally at night., • May require working on or near moving equipment and vibrating equipment., • May be exposed to intense light from welding operations., • Occasional exposure to open fire/flames/sparks from welding and grinding operations., • Depending on the location, may require working in hot, humid conditions (above 90 F degrees) or cold (below 32 F degrees) temperatures. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT • Lift 20-50 pounds., • Work in confined spaces, kneel, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands., • Identify color differences., • Lift 10-25 pounds., • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects., • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead., • Operate a motor vehicle., • Lift up to 10 pounds., • Wear PPE protection as required for the conditions., • Be able to recognize and react to alarms. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DDS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Develops Task Group Instructions (TGIs) within the Production Engineering department to support various submarine maintenance availabilities. Requires experience with the preparation and review of technical material for publication in both paper and electronic formats. Documentation to develop includes (but is not limited to) TGIs, various required support enclosures, Objective Quality Evidence (OQE) and Reference Documents with Technical Variance Data (TVD). The daily use of technical manuals, equipment manuals, operating and maintenance instructions/manuals, database entry, parts lists, assembly instructions, reports, appendices. Use of the ATIS (Advanced Technical Information Support) software on a daily basis in the research for the TGI development. • Complete the planner qualification card Sections I, II, III to write Non-SUBSAFE and NON-SOC work (TGIs)., • Research and develop technical work documents (TGIs) (Non-SUBSAFE) for the restoration/repair of various shipboard components through the review of applicable drawings and references., • Research and develop technical work documents (TGIs) (Non-SUBSAFE) with a minimum of structural or pipe welding through the review of applicable drawings and references., • Proper use & familiarity with the UIPIs, Navy Standard Items, OII-MSD Submarine & Deep Submergence Systems Quality Assurance Manual, OII-MSD Process Instructions as defined by OII-MSD PI Training Matrix with emphasis on PI-012, 021, 024, 025, 026, 059 & 064., • Conduct all necessary research, to include reading source material, using the ATIS application software, working with other subject matter experts (SMEs)., • Print all available drawings/references in ATIS that are applicable to the task for inclusion in the work package for on-site use. In addition, obtain applicable ASW/CS Test Procedures and specifications/standards for inclusion in the package., • Read, understand and interpret blueprints, drawings, schematics and specifications to determine the requirements for the tasks assigned., • Review and maintain the master database of TGIs on electronic media for task assignment and TGI status updates for configuration management in accordance with published procedures., • Strong research abilities using WWW search engines, databases, ATIS, and other available resources., • Understand all of the phases in the process of developing/issuing a TGI from the assignment, development, review, issue and maintenance of the final TGI., • Progress towards completion of the planner qualification card for Planner II. EDUCATION • Five years' experience in writing maintenance, operations and troubleshooting and testing procedures (Task Group Instructions (TGI's), Formal Work Procedures (FWP's), Controlled Work Procedures (CWP's)., • In-depth working knowledge of the following: Submarine HM&E systems (repair/installation practices, procedures, alignments, troubleshooting, welding, brazing, etc.), Combat System (VLS and torpedo stowage, handling, launching components & associated systems and the 3" Launcher system, Sail, Mast and antennas systems., • Display knowledge of UIPIs, Navy Standard Items, MILSPEC, Level 1 and SUBSAFE requirements., • Experienced with technical documentation development and editing of large-scale systems for both commercial and military customers, with experience in technical writing and editing in engineering topics; Engineering background desired., • Must possess good written and verbal communication skills and the ability to successfully interact with all levels of the Company and subcontractor organization., • Familiarity with Government publication standards for specifications and manuals., • Well-developed application software skills in Windows environment, with emphasis in Microsoft Office applications., • Communication and multi-tasking skills essential., • Familiarity with HM&E systems Combat System (VLS and torpedo stowage, handling, launching components & associated systems and the 3" Launcher system, Sail, Mast and antennas systems., • Familiarity with NAVSEA 0924-062-0010, Submarine Safety (SUBSAFE) Requirements Manual; OII-MSD PI-012, Task Group Instruction Development and Control; OII-MSD Surface Ship Quality Assurance Manual & OII-MSD PI-039, Re-Entry Control Process., • Must have, or be able to obtain a secret security clearance issued by the U.S. DoD. We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Are you a military service member within or nearing your 180-day window for separation from active duty? If this is you, then Oceaneering has a unique opportunity to help kick-start the next chapter in your professional life. We are accepting applications for our very own DoD Skill Bridge Internship Program, which is a cutting-edge initiative designed to link our nation's warfighters to the best employment opportunities available as soon as possible in their transition process. In this internship with Oceaneering, you will: • Learn how your military experience translates into a rewarding civilian career., • Explore a career or industry you might want to pursue upon separation from active duty., • Earn real-world industry qualifications and certifications., • Build experience and competency in your trade/ profession with our team., • Expand your professional network of contacts. REQUIRED: • Must meet all eligibility requirements outlined in DOD Instruction 1322.29 and NAVADMIN 222/15., • Command approval via Oceaneering SkillBridge Application., • Official TAD/ TDY Orders to Oceaneering International, Inc. for the period of the internship., • Minimum of six (6) years technical knowledge and operational experience with Naval Submarine and/or Surface HM&E systems., • Working knowledge of SUBSAFE & Level 1, Scope of Certification (SOC), drawing and NAVSEA approved testing and certification/re-certification requirements., • High comprehension of current testing requirements for certification/recertification of U.S. Navy submarines, surface ships, and special purpose vehicles/systems to serve as the subject matter expert., • Ideal candidate will be a U.S. Navy E-5 to E-9 enlisted Submarine engineering rated sailor with a Submarine Warfare Qualification., • Experience as "Chief of the Boat" (COB) on a U.S. Navy Submarine is a plus., • Strong computer skills with a working knowledge of Microsoft Office Suite., • Excellent verbal and written communication skills., • Self-Starter, highly motivated individual that can work independently with minimal oversight. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Oceaneering's Marine Services Division (MSD) is seeking Inside Machinists with CNC programming, setup, and machining experience to support the manufacturing of complex, critical submarine components in a low-volume, build-to-print environment. This role requires knowledge of machining principles, precision measurement, and blueprint interpretation. Unlike high-volume "widget" machining shops, our work consists of one-off and non-repeat builds with tight tolerances, exotic alloys, and high-quality standards that directly support the U.S. Navy submarine fleet. This role does not require travel but may require overtime. CNC PROGRAMMING & SETUP: • Review and edit CNC programs (lathe and mill) using G-code and CAM platforms., • Set up, align, and secure workpieces, fixtures, and tooling on CNC and manual machines., • Perform the setup and operation of a wide range of equipment that could include lathes, mills, grinders, saws, and/or related shop machinery., • Machine complex components from materials such as HY-80, HY-100, stainless steel, Inconel, and other submarine-grade alloys., • Select the correct speeds, feeds, tooling, accessories, and cutting methods to achieve required tolerances and surface finishes, under some supervision., • Read, interpret, and execute machining work using complex blueprints, drawings, manuals, GD&T callouts, and technical work documents., • Inspect, measure, and verify machined features using OD/ID micrometers, height gauges, depth gauges, calipers, verniers, dial indicators, lay-out tools, and other precision metrology equipment., • Accurately record measurements, readings, and inspection data to ensure compliance with critical tolerances., • Adhere to stringent submarine and Navy quality standards, including tight tolerances, high-accuracy fits, and critical surface finishes., • Follow all company, OSHA, and NAVSEA safety and cleanliness requirements., • Support continuous improvement in tooling, fixturing, machining methods, and program efficiency. REQUIRED: • High School Diploma/GED., • Minimum two (2) years' experience machining complex submarine, aerospace, defense, nuclear, or similarly critical components in a precision or defense manufacturing environment., • Demonstrated proficiency in CNC programming (lathe and mill)., • Ability to perform full setup and operate CNC and/or manual machines., • Ability to edit existing programs and perform offsets as needed., • Ability to read and interpret complex blueprints, drawings, GD&T, and technical specifications., • Demonstrated working knowledge of shop math (e.g. convert between decimals and fractions, adding and subtracting decimals and fractions, basic trigonometry used for layout and measurements, etc.)., • Ability to perform in process inspections with accurate documentation to maintain quality standards., • Demonstrated proficiency using precision measuring instruments and accurately documenting measurements., • Ability to work independently, with occasional supervision., • Experience with exotic alloys and challenging machining conditions., • Familiarity with NAVSEA or military specifications., • CAM software experience (Mastercam, SolidWorks, etc.)., • Demonstrates high attention to detail and quality craftsmanship., • Strong communication skills with a collaborative mindset., • Ability to coordinate effectively with individuals in other departments, such as Quality or Engineering., • Willingness and ability to mentor less experienced Inside Machinists., • Prioritizes safety and maintaining a clean and organized work area. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: • This position is considered SHOP/INDOORS which is characterized as follows., • Primarily indoors during the day and occasionally at night, • May require working on or near moving equipment and vibrating equipment, • May be exposed to intense light from welding operations., • Occasional exposure to open fire/flames/sparks from welding and grinding operations, • Depending on the location, may require working in hot, humid conditions (above 90 F degrees) or cold (below 32 F degrees) temperatures. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT • Lift 20-50 pounds., • Work in confined spaces, kneel, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands., • Identify color differences., • Lift 10-25 pounds., • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead., • Operate a motor vehicle., • Lift up to 10 pounds., • Wear PPE protection as required for the conditions., • Be able to recognize and react to alarms. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. The Engineer IV applies advanced technical knowledge to Oceaneering's Marine Services Division's (MSD) engineering and design activities. This role is located in Chesapeake, VA. The Engineer IV provides technical leadership and oversight for large and/or complex projects under the direction of a Project Manager. This role assists the Design Engineering Manager and Project Manager in defining and managing resource requirements, schedule, and cost for projects under his/her cognizance. The Engineer IV interacts with other MSD personnel including those in QA, Manufacturing, Purchasing, Shipping and Receiving, as necessary to provide engineering support to MSD manufacturing, integration, and test activities. They direct an engineering design/production team in development of a design project/production availability throughout the entire cycle from initial concept/planning through successful completion. They complete assigned engineering projects in accordance with customer specifications and within schedule and budget limitations through coordinating activities of engineering team, contractors, and vendors. This role may require up to 25% travel. • Independently perform difficult engineering tasks to completion that may include a variety of complex features, conflicting design requirements, unusual materials requirements, and the need to coordinate the work of others., • Exhibit excellent technical judgment, and appreciable independent evaluation, creativity, and latitude in making decisions., • Demonstrate ability to devise innovative solutions to problems., • Develop objectives, schedules, and estimates for difficult assignments., • Direct and supervise the activities of moderate to large size teams of engineers, tech writers, designers, and drafters., • Review progress and evaluate results of work accomplished by self and others., • Interact with customer technical representatives to define and manage customer expectations., • Use team management skills to lead the design engineering group during various phases of a project or availability., • Assess vendors for competence, capabilities, and resources., • Review/approve Engineering Work Packages (e.g. TGIs) related to project., • Review/approve Engineering Change documents (e.g. CRs, LARs, DFSs) related to project., • Review/approve Engineering designs, models, drawings and calculation packages., • Candidate will have to perform in an ISO-9000 rated company in a rapidly changing and demanding atmosphere., • May assist in or lead Bid and Proposal efforts including cost estimating, technical approach definition, and input to baseline schedule data., • May participate in or lead Technical Working Groups to assess and improve processes and capabilities. REQUIRED: • Bachelor's degree in Engineering (Mechanical, Electrical, Ocean or Nuclear) or Naval Architecture from accredited college or university., • Minimum ten (10) years engineering experience in complex systems design, manufacturing, and integration environment., • Demonstrated ability to lead technical groups of more than five engineers, designers, and/or drafters., • Familiarity with ISO 9000 design requirements., • Proficiency in Microsoft Office products and CAD software, such as AutoCAD or SolidWorks or similar packages., • Must be a U.S. citizen who is not a dual citizen of any other country., • Master's degree in related field., • Proficiency in MathCad., • Engineer in Training (passed FE exam)., • Excellent communications and organizational skills., • Understands Finite Element Analysis -particularly Solidworks Simulation or ANSYS Workbench. Working knowledge of both is preferrable., • Must be competent in system engineering methodologies., • Experience performing Dynamic Design Analysis Method (DDAM) is a plus., • Demonstrated knowledge of SUBAFE or SOC requirements is preferred., • Possesses and applies an advanced knowledge of engineering principles and practices in one or more engineering fields., • Possesses a working knowledge of the manufacturing/integration aspects related to one or more technical fields related to MSD efforts., • Demonstrated knowledge of military, and commercial, construction and material specifications applicable to Submarine and Deep Submergence System work. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. The Waterfront Engineer III provides advanced technical expertise and analytical support in the resolution to Condition Reports (CR) that are generated as a result of modifications to the Statement of Work (SOW), Technical Work Documents (TWD) or as found conditions in the performance of work. Prepares technical reports/instructions to support contracts; resolves conflicts and/or determine testing requirements for certification of production work performed for contracts. The Waterfront Engineer III assists the Waterfront Engineering Manager and Project Manager in defining and managing resource requirements, schedule, and cost for projects under his/her cognizance. This role supports Oceaneering's Marine Services Division (MSD) located in Chesapeake, VA. Successful candidates must be willing to travel up to 25-30%. This individual will interact with MSD personnel including those in QA, Manufacturing, Purchasing, Shipping and Receiving, as necessary to provide engineering support to MSD manufacturing, integration, and test activities. They provide accurate, timely responses to CRs submitted by various activities, as well as resolution for technical issues concerning maintenance, assists in preparation of any additional documentation required, i.e., LARs, DFSs, etc., and prepare sketches and/or drawings to support resolutions of CRs when required or by a contract. • Independently performs moderate to difficult engineering tasks to completion that may include a variety of complex features, conflicting design requirements, unusual materials requirements, and the need to coordinate the work of others., • Exhibit excellent technical judgment, and appreciable independent evaluation, creativity, and latitude in making decisions are expected., • Develop engineering sketches or drawings in support of technical solutions., • Produce DFSs for submission to NAVSEA., • Prepare LARs for submittal to the applicable Planning Yard., • Provide support in the determination of technical accuracy and evaluation of requests for drawing requirement clarification/drawing revision to onsite production personnel., • Interface with Purchasing Department, Technical Staff, and vendors as required to develop Job Material Lists as a result of Condition Reports., • Read, understand, and interpret blueprints, drawings, schematics, and specifications of testing requirements for all contracts., • Review progress and evaluate results of work accomplished by self and others., • Provide recommended resolution and approval authority to conditions reported on CRs., • Provide process improvement recommendations to the Waterfront Engineering Manager., • Effectively communicate with personnel at a management level and outside the company., • Review/approve Engineering Change documents (e.g. CRs, LARs, DFSs) related to project., • Review/approve Engineering designs, models, drawings and calculation packages., • May assist in or develop Bid and Proposal efforts including cost estimating, technical approach definition, and input to baseline schedule data., • May participate in or lead Technical Working groups to assist and improve processes and capabilities. REQUIRED: • Bachelor's degree in Mechanical, Electrical, Ocean, or Nuclear Engineering, or Naval Architecture from an accredited college or university, or 8 years of experience in relevant ship repair or Submarine Systems in lieu of a degree., • 10 years of experience in military, government, defense industry, or private industry in progressively more complex scientific, technical, analytical, or other related areas., • Working knowledge of the following: Scope of Certification (SOC), DDS Specifications, SUBSAFE, Material Control (SOC, , L1); JFMM Requirements for Deviations, Waivers, LARs, etc.; shipboard HM&E systems (repair/installation practices, procedures, alignments, troubleshooting, etc.), blue prints, MILSPEC, Mil-Std, ISO/ASME requirements., • Familiarity with various COTS (Commercial off the Shelf) software, as well as US Navy software (ATIS, SVTMs, PMS, SCLSIS, PC Bolts, etc.)., • Experience with SUBSAFE program and required protocols., • Strong computer skills. Working knowledge of Microsoft Suite and PeopleSoft experience is a plus., • Excellent verbal and written communication skills., • Background knowledge in government and commercial contract requirements., • Self-motivated, focused individual with strong attention to detail and high ethical standards., • Ability to perform advanced engineering tasks and conventional design that may be varied in nature., • Ability to read and interpret blueprints., • Ability to supervise a small team of technical personnel and support multiple projects., • Strong organizational skills and analytical / logical approach., • Ability to synthesize diverse information (technical, schedule) and exercise good judgment., • Good technical judgment and independent evaluation, originality and ingenuity are expected. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Oceaneering's Marine Services Division (MSD) in Chesapeake, VA is seeking a highly skilled Inside Machinist Supervisor to oversee the daily operations of our machine shop. We are a precision manufacturing company specializing in medium-sized, complex, and mission-critical components. Our work is non-repetitive, high-tolerance, and often governed by stringent technical and quality standards. This role requires a hands-on leader with deep technical expertise, strong organizational skills, and the ability to manage a dynamic, high-stakes environment. This role may require overtime. • Supervise and coordinate daily production assignments, ensuring machinists are properly guided and supported in executing complex, non-repeatable machining tasks., • Lead the creation, editing, and optimization of CNC programs for both lathe and mill operations using G-code and CAM platforms (e.g., Mastercam, Fusion 360, or equivalent), tailored to unique component geometries and material specifications., • Validate CNC programs through first-article inspections, ensuring dimensional accuracy, repeatability, and compliance with engineering drawings, MIL-STDs, and SUBSAFE/SOC requirements., • Oversee the setup and proper utilization of CNC and manual machines, ensuring tooling, fixturing, and work-holding strategies are appropriate for the task and aligned with best practices., • Instruct, train, and mentor machinists in advanced machining techniques, CNC programming fundamentals, machine setup, and precision measurement methods., • Monitor and troubleshoot machining operations, providing hands-on technical support to resolve issues related to tooling, feeds/speeds, surface finish, and tolerance stack-ups., • Schedule, prioritize, and control shop production tasks and projects to meet deadlines while optimizing manpower and machine utilization., • Ensure efficient use of labor and materials, maintaining accountability for man-hour expenditures and minimizing waste., • Recommend and implement improvements in machinery, equipment, tooling, and production methods to enhance quality, safety, and throughput., • Review and approve Technical Work Document packages (REC, CWP, TGI) before job release, ensuring full scope coverage and identifying special reference readings for system reinstallation or certification., • Audit completed Technical Work Document packages to verify all requirements and objective quality evidence (OQE) are met; sign, • Re-Entry Control (REC) documentation per OII-MSD Quality Assurance Manual., • Ensure accurate and timely completion of production documentation, including time reporting, QA inspection records, and material purchase requests., • Maintain and communicate production status updates to the Project Manager, identifying risks and proposing mitigation strategies., • Conduct periodic performance evaluations of machinists, providing constructive feedback and enforcing disciplinary actions in accordance with company policies., • Assist in estimating labor, material, and scheduling requirements for new and ongoing projects., • Operate machine tools and equipment when necessary to support production or training efforts., • Support special projects and other duties as assigned, including extended hours and after-hours support as required. REQUIRED: • High School Diploma/GED, • Minimum three (3) years of supervisory experience in a precision machine shop environment., • Minimum ten (10) years of manual and CNC machining experience, • Demonstrated knowledge of trade tools, precision instruments, and machining resources., • Supervisory experience in a Naval or shipyard environment., • Strong foundational leadership, coaching, and mentoring abilities., • Excellent communication and interpersonal skills across all levels of the organization., • Strong attention to detail., • Ability to follow detailed instructions and strict quality requirements. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Join our team as a Project Engineer (PE) and take the lead on exciting, large-scale projects that challenge your technical expertise and leadership skills. As a key member of our engineering department, you'll work closely with the Chief Engineer and Project Manager to define and manage the resources, schedule, and costs for our cutting-edge projects. Collaborating with diverse teams across our organization, including QA, Manufacturing, Purchasing, Shipping and Receiving, you'll provide crucial engineering support throughout the manufacturing, integration, and testing phases. With your guidance, our engineering team will deliver high-quality solutions from initial concept to successful completion, ensuring project and production availability align with customer specifications. If you're ready to drive innovation and make a tangible impact within a collaborative environment, apply now. EXPECTATIONS: • Self-motivated, focused individual with strong attention to detail and high ethical standards., • Capable of developing and leading a small engineering team through a complex submarine overhaul., • Ability to read and interpret blue prints, applicable submarine specifications and Special Emphasis Program requirements., • Ability to work as part of a team of managers and technical personnel and support multiple projects., • Strong organizational skills and analytical / logical approach., • Ability to synthesize diverse information (technical, schedule) and exercise good judgment., • Good technical judgment and some independent evaluation, originality and ingenuity are expected., • Independently performs difficult engineering tasks to completion that may include a variety of complex features, conflicting design requirements, unusual materials requirements, and the need to coordinate the work of others., • Excellent technical judgment, and appreciable independent evaluation, creativity, and latitude in making decisions are expected., • Demonstrates ability to devise innovative solutions to problems., • Develops objectives, schedules, and estimates for difficult assignments., • Directs and supervises the activities of small to moderate size teams of engineers and tech writers, • Reviews progress and evaluates results of work accomplished by self and others., • Interacts with customer technical representatives to define and manage customer expectations., • Uses team management skills to lead the design or production engineering group during various phases of a project or availability., • Reviews Engineering Work Packages (e.g. TGIs) related to project., • Assist in Bid and Proposal efforts including cost estimating, technical approach definition, and input to baseline schedule data., • Participate in Technical Working Groups to assess and improve processes and capabilities. EDUCATION: • Minimum 5 years engineering experience in complex systems design, manufacturing, and integration environment. Knowledge related to submarine structural fabrication and welding requirements such as NAVSEA Tech Pub 1688, 278, or 248 and the NAVSEA URO/MRC program desired., • Demonstrated knowledge of military, and commercial, construction and material specifications applicable to Submarine and Deep Submergence System work., • Demonstrated ability to lead technical groups., • Excellent communications and organizational skills., • Demonstrated knowledge of military, and commercial, construction and material specifications applicable to Submarine and Deep Submergence System work., • Possesses and applies an advanced knowledge of engineering principles and practices in one or more engineering fields., • Has provided field support in engineering capacity., • Candidate will have to perform in an ISO-9000 rated company in a rapidly changing and demanding atmosphere., • Must be able to obtain a U.S. DoD Secret Security Clearance., • Must be a U.S. citizen who is not a dual citizen of any other country., • Must be willing to travel up to 25%., • Basic understanding of Project Management. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Oceaneering is seeking a qualified Production Supervisor to lead and support production efforts for the Marine Services Division (MSD) based in Chesapeake, VA. Production Supervisors oversee skilled trades staff and their work in a production environment and ensure compliance with all safety, quality, technical, and housekeeping standards, including adherence to SUBSAFE and other industry requirements. They are responsible for coordinating production efforts and are known for their ability to identify, communicate, and resolve problems as they arise. Frequent overtime may be required. Travel may be required up to 75% of the year. • Provide training and guidance to team members to help them successfully perform their daily job duties., • Plan, assign, and direct daily production work., • Provide leadership and guidance for employees through regular feedback, annual performance reviews, and frequent two-way communication., • Monitor compliance with federal and company safety procedures to ensure the safety of every employee on the job site; including but not limited to usage of proper personal protective equipment (PPE) for each assigned task., • Identify problems and remove roadblocks for the production team by suggesting innovative solutions and ensuring the necessary resources, materials, or support are available., • Resolve technical issues faced by the production team, including the interpretation of drawings, schematics, MIL-STDs, SUBSAFE requirements, production processes, and more., • Communicate with customers to provide updates and ensure satisfaction with progress., • Ensure production deadlines are met through coordinating scheduling efforts, prioritizing tasks, and monitoring production progress., • Monitor and approve timesheet submissions for production team members, ensuring accuracy and timely submission., • Ensure the team is equipped properly prior to commencing work (e.g. proper PPE, manuals, drawings, tools, QA paperwork, etc.)., • Verify submission of all required production paperwork (e.g. travel forms, QA Inspection Documentation, Material Purchase Order Requests, etc.)., • Provide status updates to Project/Program Managers as needed, including during weekly meetings., • Ensure proper maintenance of all equipment used by the production team; including tools issued by the tool room., • Provide clear pre- and post-shift job briefs to the production team to highlight daily items and discuss any concerns., • Monitor materials and tools needed for the job and communicate/escalate delays to minimize the impact to work schedules., • Review OII work packages prior to beginning work to ensure the full scope of work is identified for the assigned task, including any special requirements for readings, reinstallations, certifications, or otherwise., • Review and/or audit OII work packages as work is completed to ensure all requirements are met., • Assist in identifying unsatisfactory work processes and making improvements as appropriate., • Other duties as assigned. REQUIRED EDUCATION: • Associate's degree in a mechanical discipline (i.e. Industrial/Marine Technology, Engineering Technology, etc.); or, • High School Diploma/GED and an Apprenticeship Diploma in a related skilled trade (i.e. Welding, Machining, Rigging, Electrical work, etc.); or, • Minimum 2 years of leadership experience in an industrial environment, preferably in shipbuilding., • Minimum six (6) years experience performing hands-on installation, maintenance, or repair on board Navy vessels., • Must be a U.S. citizen who is not a dual citizen of any other country., • Six (6) years of specialized experience in performing SUBSAFE/Level I material work., • Experience performing maintenance, restoration and testing of Submarine Structural Closure's (hatches and watertight doors)., • Experience working on submarine hull, mechanical/electrical systems, torpedo room, VLS, submarine mast/antenna, or other similar systems preferred., • Demonstrated technical knowledge and proficiency with submarine and/or surface combat weapons systems, launcher systems, or other similar Naval or military system., • Demonstrated knowledge of Naval ship repair industry and procedures., • Must be able to communicate effectively with individuals within and outside the organization., • Detail-oriented., • Self-motivated., • Ability to solve problems through critical thinking and willingness to be flexible and find innovative solutions., • Leadership and management skills. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered primarily ONSHORE which is characterized as follows: • Primarily on board ship during the day and occasionally at night, • Frequently working on or near moving equipment and vibrating equipment, • When outdoors, humidity is frequently above 90%, • Noise is over 85 decibels, • Light is intense/glare, • Occasional exposure to open fire/flames/sparks, • Frequent exposure to airborne dust, fumes, and gases, • Includes exposure to contaminants, • Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures, • Includes exposure to sounds and noise levels that are distracting or uncomfortable, • Job tasks are performed in close physical proximity to other people The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT • Lift 20-50 pounds, • Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands., • Identify color differences, • Wear PPE for skin protection, • Work at heights above 20', • Lift 10-25 pounds, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead, • Operate a motor vehicle, • Lift up to 10 pounds, • Wear PPE protection for body, vision, and hearing protection, • Ascending/descending vertical ladders All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Oceaneering's Marine Services Division (MSD), located in Chesapeake, Virginia, is seeking an Engineer I focused on NEW DESIGN DEVELOPMENT to support engineering and design activities in Chesapeake, VA. This role is ideal for an engineer who wants to create new systems, develop original solutions, and contribute to cutting-edge projects supporting submarine and deep-submergence platforms. The Engineer I applies a solid foundation of engineering principles to design new components, systems, and assemblies, working under the direction of a Mentor, Project Engineer or Design Engineering Manager. The role also requires collaboration with QA, Manufacturing, Purchasing, and Test teams to transition new designs from concept through production, integration, and verification. • Perform engineering tasks focused on new system and component design, including concept development, modeling, analysis, and documentation., • Help to solve design challenges involving conflicting requirements, unique materials, and multi-disciplinary constraints., • Apply sound technical judgment, creativity, and independent evaluation to develop innovative solutions., • Help to develop engineering designs, models, drawings, and calculation packages., • Work effectively in an ISO-9000 environment with rapidly changing priorities., • Participate in Technical Working Groups to improve design processes and capabilities. REQUIRED: • Bachelor's degree in Engineering (Mechanical, Electrical, Ocean, Nuclear) or Naval Architecture., • Proficiency with Microsoft Office and CAD tools such as AutoCAD or SolidWorks., • U.S. citizenship (no dual citizenship)., • Master's degree in related field., • Strong communication and organizational skills., • Understanding of Finite Element Analysis principles-SolidWorks Simulation or ANSYS Workbench preferred., • "Self-starter" attitude that is capable of working on a multidisciplinary engineering team., • Ability to apply advanced engineering principles to new design challenges. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Job Description Waltonen Engineering Inc. is seeking a dynamic business development professional with a strong track record in leading and mentoring teams in capture and proposal management for major U.S. Department of the Navy (DON) initiatives. The ideal candidate will excel at collaborating with and influencing diverse cross-functional Navy stakeholders and navigating opportunities within the Navy’s system commands, including Naval Air Systems Command (NAVAIR), Naval Sea Systems Command (NAVSEA), Naval Supply Systems Command (NAVSUP), and Marine Corps Systems Command (MARCOR). This role calls for an entrepreneurial self-starter who thrives in a fast-paced, small business setting, who can confidently lead peers and senior colleagues while contributing across the entire business development, capture, and proposal development lifecycle. Responsibilities • Report to Director of Government Services, • Develop and implement business development strategies to achieve company goals within Navy system commands (NAVAIR, NAVSEA, NAVSUP, MARCOR)., • Identify and pursue new business opportunities within the Navy’s system commands., • Oversee the entire business development, capture, and proposal development lifecycle., • Collaborate with and influence diverse cross-functional Navy stakeholders., • Build and maintain strong relationships with key Navy stakeholders and decision-makers., • Prepare and present proposals, presentations, and other business development materials., • Monitor industry trends and competitor activities to identify potential opportunities., • Ensure compliance with all relevant regulations and standards., • All employees are required to work within the confines and responsibilities of the quality system.Qualifications, • Degree in Business, Engineering, or a related field is preferred; equivalent experience will be considered in lieu of a degree., • Proven track record in leading and mentoring teams in capture and proposal management., • Extensive experience with U.S. Department of the Navy initiatives., • Strong understanding of Navy system commands (NAVAIR, NAVSEA, NAVSUP, MARCOR)., • Excellent collaboration and influencing skills., • Entrepreneurial self-starter with the ability to thrive in a fast-paced, small business setting., • Strong leadership skills with the ability to lead peers and senior colleagues., • Exceptional communication and presentation skills., • Ability to manage multiple projects and priorities simultaneously., • Knowledge of relevant regulations and standards., • Only United States citizens can be considered., • Must possess or be able to obtain a security clearance., • Proficiency with Microsoft Office Suite is a plus., • Familiarity with Salesforce or other CRM systems is advantageous.All employees are required to work within the confines and responsibilities of the quality system. Benefits • Medical, Dental & Vision Insurance, • Paid Time Off and Holiday pay, • Employer matching 401K, • Hybrid work schedule after 90 days for eligible positions, • Tuition Reimbursement, • Flexible Spending Programs (FSAs), • Short-Term & Long-Term Disability Insurance, • Employee Referral Program, • Additional Voluntary Benefit Programs Founded in 1957 and proudly 100% U.S.-owned, Waltonen has deep roots in Warren, Michigan, and a strong commitment to supporting our local community. As a trusted engineering company, we serve the automotive, aerospace, and defense industries with precision, innovation, and integrity. Our team takes pride not only in the work we do, but in the positive impact we make—both in the industries we serve and in the community we call home. Waltonen Engineering, Inc. is an equal opportunity employer and will consider qualified applicants for all positions without regard to race, color, sex, religion, national origin, age, marital status, weight, height, or the presence of a non-job-related medical condition or handicap. Powered by JazzHR JC0YE25HfW

Job Description Complete Logistical Services is excited to announce an opening for a Staff Electrical Engineer. This full-time position offers an exceptional opportunity to be a part of our dynamic team, engaging in a variety of challenging projects that involve innovative engineering solutions. Situated within our Aerospace and Defense Technologies (ADTECH) division—an engineering center of excellence, this role is critical in supporting our mission to overcome some of our customers' toughest challenges. The selected candidate will play a crucial role in the development and implementation of complex power and control systems for unique underwater robotic and electromechanical systems, primarily serving U.S. Navy and other Department of Defense clients. This position is not remote and requires hands-on participation in both the design and execution phases of the project lifecycle. By joining our team, you will work on novel projects that promise new and exciting challenges every day, ensuring that your professional skills are continuously engaged and expanded. Duties and Responsibilities • Lead the design and development of electrical and control systems as part of large-scale projects., • Supervise, mentor, and lead teams of electrical engineers to achieve project goals., • Translate high-level project requirements into detailed designs autonomously, with minimal supervision., • Demonstrate creativity and technical excellence in every stage of problem-solving and system construction., • Actively participate in regular design review meetings to ensure quality and adherence to specifications., • Collaborate effectively with mechanical, software, and systems engineers to design and realize integrated, functional systems., • Provide guidance and mentorship to junior engineers and technicians where necessary., • Maintain responsibility and accountability for personal and team results, operating with substantial autonomy., • Engage in the hands-on assembly and testing of electrical systems, embodying our principle of “making it work”., • Constantly seek opportunities to expand personal knowledge and skills in engineering and leadership.Requirements, • Bachelor of Science or advanced degree from an accredited university in Electrical/Electronic Engineering, Computer Engineering, Robotics Engineering, or a related field with an Electrical concentration., • At least 10 years of practical, technical experience in electrical engineering, encompassing concept development, system design, analysis, simulation, integration, and testing., • Ability to obtain and maintain a United States Government Department of Defense Security Clearance; active clearances are preferred but not required before employment., • Must be a U.S. citizen to comply with government contractual obligations., • Proven capability to lead and mentor a team, fostering a collaborative work environment., • Outstanding technical judgment and attention to detail, with a systematic approach to problem-solving., • Experience in designing control systems for automated or robotic systems is highly desirable., • Demonstrated ability to work well with cross-functional teams and communicate effectively with various engineering disciplines., • A readiness to handle unforeseen challenges with a proactive, problem-solving attitude., • Keen interest in taking on increased responsibilities and growing within a globally recognized enterprise.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: In-Service Engineer Electronics Specialist Job Code: 37107 Job Location: Norfolk-VA Schedule: 5-40 Regular (Monday through Friday) L3Harris is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. About L3Harris Technologies: L3Harris Technologies is an agile global aerospace and defense technology innovator, delivering end-to-end solutions that meet customers' mission-critical needs. The company provides advanced defense and commercial technologies across space, air, land, sea and cyber domains. L3Harris has approximately $18 billion in annual revenue and 47,000 employees, with customers in more than 100 countries. Job Description: L3Harris Technologies is seeking an In-Service Engineer Electronics Specialist in Norfolk Virginia. This employee will perform technical work primarily requiring practical knowledge of the methos and techniques of engineering and the construction, applications, properties, operation, and limitations of a complex naval submarine system. Essential Functions: • \n Engineering Support and Process Improvement: \n, • Collect and provide data to Engineers as part of the Engineering Change Proposal (ECP) process. \n, • Contribute to system improvements by leveraging work experience and technical knowledge. \n, • Review and provide input on new test procedures and related program documents. \n\n\n, • \n Field and Fleet Support \n, • Assist the In-Service Engineering Agent (ISEA) and Alteration Installation Team (AIT) teams with Temporary Alterations (TEMPALTS), system certifications, modernization, and maintenance tasks at various Naval bases and shipyards. \n, • Independently provide technical engineering guidance and technical assistance on assigned systems. Investigate, analyze and resolve problems pertaining to the design, installation, maintenance, operation or repair of the assigned system. \n, • Identify training gaps and create training products focused on improving those gaps in the submarine electronic warfare domain. \n, • Provide technical assistance for in-water test events, including logistics, rigging, and de-rigging of equipment. \n\n\n \n • \n Technical Responsibilities: \n, • Troubleshoot circuit boards, isolate faults, and perform necessary repairs, including replacing resistors, IC chips, and capacitors. \n, • Design, develop and calibrate instrumentation required for system installations. Make modifications adapting mechanical, electro-mechanical, electrical, electronic and optical instrumentation for specific projects. \n, • Overhaul systems, including electrical and electronic work, followed by physical reassembly (disassemble, sand, paint, and reassemble equipment). \n, • Test systems on test stands to ensure they are Ready for Issue (RFI) and perform necessary repairs if they fail testing. \n, • Assemble fiber optic connections. \n, • Implement Engineering Changes (ECs) according to the instructions provided by Engineers. \n\n\n, • Ability to obtain and maintain a Top-Secret clearance. \n, • Travel up to ~30% - 35% as needed. \n\n Qualifications: \n • Knowledge of Navy and Maintenance Engineering Requirements. \n, • Understanding of Navy, major command, and other levels of maintenance engineering program requirements relevant to the development of scheduled maintenance needs. \n, • Knowledge of Submarines, Surface Ships, and Weapons Systems: \n, • Familiarity with submarine and surface ship operations, weapons systems, and their operating requirements. \n, • Ability to perform technical engineering services that effectively address real-world fleet needs. \n\n\n, • ACTIVE SECRET CLEARANCE required. \n, • Bachelor's Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience. \n\n Preferred Additional Skills: \n • TOP SECRET Clearance to start. \n, • Self-motivated and able to work independently. \n\n #LI-IK1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Apply engineering expertise to review part obsolescence in build-to-print environment and work with NAVY customer for concurrence. Minimum of a bachelor’s degree in mechanical or electrical engineering with eight (8) years of professional experience or equivalent combined education/experience. A P

Enterprise Strategy and Business Planning department within the Systems Engineering & Launch Division. Bachelor’s OR Master’s degree in a relevant engineering, mathematics, or science field. A minimum of 8 years of experience in engineering, strategy, or technical field.

Complete engineering assignments accurately and on a timely basis utilizing standard engineering programs. Degree or higher in Mechanical Engineering, Marine Engineering, or a related field. Professional certificates of competency in applicable CAD & engineering software.

The National Systems Group serves as the technical advisor to the Intelligence Community and its mission partners involved in the collection and distribution of national and tactical intelligence, including electronics programs, advanced technologies, ground and communications, imagery programs, and

Degree or higher in Mechanical Engineering, Marine Engineering, or a related field. Complete engineering assignments accurately and on a timely basis utilizing standard engineering programs. Professional certificates of competency in applicable CAD & engineering software.

Minimum Requirements for Senior Project Engineer - Systems Engineering- Acquisition and Systems Engineering:. We are looking for a IT Architectures and Systems Engineer (Senior Project Engineer – Systems Engineering – Acquisition and Systems Engineering to support the National Reconnaissance Off

Degree or higher in Naval Architecture, Marine Engineering, Electrical Engineering or a related field. Provide marine engineering design expertise for high-speed and small craft throughout the design lifecycle — concept through detailed design for production. Broad knowledge of marine engineering

Systems Engineering, Risk Management, System Verification, and Threat knowledge and experience to support next-generation major system acquisitions across multiple phases of the Systems Engineering process. At Aerospace, our commitment is our people. This role will directly support the customer Chie

Stampede Ventures provides a diverse portfolio of full-service construction, renovation, and civil work to meet the needs of Government and private sector customers.We leverage our experience to provide our customers with the best possible pricing and high quality service on all projects we perform.

Conduct engineering assignments to develop new methods, tooling and machine concepts, cost estimates, and/or to resolve engineering problems involved in manufacturing of components, sub-assemblies, and final assemblies. Project ownership including project initiation, pre-project planning and project

Work experience and/or a degree in Engineering and/or Construction Management. Ascendion is a full-service digital engineering solutions company. Our engineering, cloud, data, experience design, and talent solution capabilities accelerate transformation and impact for enterprise clients.

This role is ideal for someone with a solid foundation in engineering, a strong background in project management, and a desire to make a tangible impact on complex, high-stakes deliverables in the railroad industry. Review and manage project financials and delivery schedules across all engineering a

Build, lead, and manage the Data Engineering team, driving rapid delivery of data solutions that enhance analytics and insights capabilities. Lead the creation of standards for data quality, lineage, governance, observability, and CI/CD processes across the data engineering organization. Collaborate

This role is ideal for someone with a solid foundation in engineering, a strong background in project management, and a desire to make a tangible impact on complex, high-stakes deliverables in the railroad industry. Review and manage project financials and delivery schedules across all engineering a

We're partnered with a high-performing GC delivering.Project Managers who want more than just another project… they want.Project Managers from a Subcontractor or General Contractor background with 3-8 years of construction experience.Open to APMs looking for promotion to a PM, or current PMs.Work

This role is ideal for someone with a solid foundation in engineering, a strong background in project management, and a desire to make a tangible impact on complex, high-stakes deliverables in the railroad industry. Review and manage project financials and delivery schedules across all engineering a

We are seeking an experienced Project Manager with a strong commercial construction background to join our team in a subcontractor leadership role.This position is ideal for a Project Manager coming from a GC environment who understands the pace, coordination, and accountability required on complex

Hotel Maintenance Technician - Eastern Region.The Hotel Maintenance Technician is a skilled craftsman that is responsible for maintaining the furniture, fixtures, and facility for interior hotel spaces onboard American Cruise Lines' ships.The Technician works closely with the Fleet Hotel Maintenance

LRT Systems Maintenance Technicians perform a variety of assignments related to overhead lines, supporting structures, substations, signal & communications, and electrical/mechanical facility amenities.Employees working this position must possess a Class "B" VA Driver's License.LRT Maintenance Techn

Peregrine Hospitality - 1590 North Military Highway - Responsibilities: Receive daily work assignments from Director of Engineer and review priorities and special projects.Organize materials, tools and equipment to perform daily assignments.Maintain timelines and work schedule in accordance with the

Bachelor's Degree in Electrical/Electronics Engineering or a related engineering discipline is required. Minimum of 10 years of professional service in electrical engineering is required. Undersea, on the surface, or in the air, SEACORP leverages its software and engineering expertise to deliver cut

Peregrine Hospitality - 1590 North Military Highway - Responsibilities: Receive daily work assignments from Director of Engineer and review priorities and special projects; Organize materials, tools and equipment to perform daily assignments; Maintain timelines and work schedule in accordance with t

Manager, Hybrid Cloud Engineering,. Systems & Platform Engineering.

Primary Responsibilities/Accountabilities: Scrum Responsibilities Facilitate daily standups, sprint planning, backlog refinement, sprint reviews, and retrospectives Support a structure of continuous improvement by managing retrospective actions to completion Remove impediments through proactive prob