Trabajos aerospace en San Diego, CA - Page 2Crear alertas

Job Description Veridiam is a strategic manufacturing partner with over 60 years of experience serving the aerospace, industrial, medical, and nuclear markets. Our roots were formed in the exacting nuclear and aerospace industries, expanded into Medical where we have supplied critical components to a global customer base. We currently provide elegant solutions across a broad range of customers and diverse markets. At Veridiam we recognize that talent is at the forefront of our organization and define who we are in today's industry. POSITION SUMMARY Extract, research, develop, test, and improve materials used in our products and processes. Perform tests and conduct research on properties, performance and applications of metals including high-performance alloys. Analyze material behavior under various conditions and prepare technical reports. ESSENTIAL DUTIES AND RESPONSIBILITIES • Perform assigned routine and advanced or complex tests on raw material, product in process, re-worked material, finished goods and/or developmental samples in accordance with customer and/or quality standards/specifications., • Conduct research on the properties, performance, and applications of metals including high-performance alloys such as stainless steel, titanium, and nickel alloys., • Develop and test new materials to improve product durability, performance, and efficiency., • Perform failure analysis and recommend design/material improvements., • Analyze material behavior under various conditions (stress, temperature, corrosion, wear, etc.)., • Review and manage internal and external material lab test results., • Develop and maintain processes for new product introduction., • Prepare technical reports, specifications, and documentation for internal and customer use., • Prepare, organize, and maintain necessary samples, forms, documentation and trend charts., • May provide data and analysis to material review board to support resolution of issues, initial data support to supplier and/or customer notification., • Ensure compliance with industry standards, safety regulations, and environmental requirements., • Support process optimization and cost-reduction initiatives without compromising quality., • Work collaboratively with cross-functional teams to ensure materials meet customer requirements and performance, quality and cost objectives., • Provide and supply training for others in the area., • Maintain clean and orderly work environment., • Demonstrates ability to appear for work on time, follow directions from a supervisor, interact well with co-workers, understand and follow work rules and procedures, comply with company policies and procedures, goals and objectives, and accepts constructive feedback. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals to perform the essential functions. Education and Experience: • Bachelor’s degree in Materials Science, Materials Engineering, Metallurgy, Chemical Engineering or related field., • Ability to read and interpret documents such as work orders, operating and maintenance instructions and procedure manuals and blueprints., • Ability understand and follow standard operating and safety procedures., • High-level attention to detail and commitment to quality standards. Pay Rate: The final salary offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and length of experience within the job, type, and length of experience with the industry, education, geographic location, etc. Veridiam is an Equal Employment Opportunity/Affirmative Action Employer. Veridiam will recruit, hire, train and promote persons into all jobs without regard to age, race, color, religion, ancestry, medical condition, sex, sexual orientation, gender identity, national origin, status as a veteran or status as an individual with a disability or any other characteristic or classification protected by law. Access to our facility (and, therefore, employment) is restricted under the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR) to U.S. Citizens, lawful permanent residents of the United States and properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes.

Job Description OEM Logistics, LLC was founded in January 2023 by two industry veterans with a proven track record of success identifying outside the box niche opportunities and solutions that address the supply chain challenges within the aerospace industry. Our mission is to manage our customer’s suppliers and sub-tiers, by bringing back discipline, communication, proper tools, and accountability. This will ensure the customer’s end user commitments and revenues are achieved. OEM Logistics, LLC is based in Arizona and is searching for multiple Supplier Specialists with a passion for manufacturing and aerospace industry, to join our Team. The Supplier Specialist position is a full-time position with frequent local travel requirements. Regional travel opportunities are available for those that are flexible and have an interest. Pre-employment background and drug screening are required. Supplier Specialist Primary Duties and Responsibilities: • Develop a partner relationship with the assigned suppliers and work as a team to meet the customer’s requirements., • Manage the suppliers Open Order Report in conjunction with the supplier to minimize risk and identify opportunities to improve delivery where necessary, • Manage delivery performance trends and initiate root cause analysis and corrective actions, • Facilitate and drive timely and effective closure of corrective actions, • Work with problematic sub-tiers to improve communication and establish achievable production commitments., • Facilitate cross-functional department communication and drive actions to prevent unnecessary delays, • Provide frequent written communication on mission critical parts and overall delivery performance, • Frequent local travel is required, • US citizenship required, • College degree preferred. May substitute additional experience in lieu of education, • Minimum of five years of manufacturing experience required (Aerospace, Defense, Ship Building, or Submarine Industry experience preferred), • Expertise in Supply Chain Management, Production Control, and Shop Floor Management, • Experience with continuous improvement, Lean Manufacturing principles, Risk Management, Six Sigma, Kaizen events, PDCA preferred, • Excellent interpersonal, written, and verbal communication skills, • Professionalism, integrity, and exceptional attention to detail, • Strong independent decision-making skills, excellent analytical skills and professional judgment, • Experience with Microsoft Office Programs required, • Must possess and maintain a current, valid driver’s license and must successfully complete a pre-employment motor vehicle history check Salary range: $70,000-85,000-- Placement within this range will vary based on several factors including, but not limited to experience, education, training, and skill level OEM Logistics, LLC is an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Powered by JazzHR K0UijHwLL6

Job Description GROW WITH US AND STAY EXTRAORDINARY: Launch your career to new heights with Innoflight—one of San Diego’s fastest-growing Aerospace and Defense innovators. Here, visionary minds engineer the future of space technology through pioneering, compact, and cyber-secure solutions. From software-defined radios to cutting-edge cryptographic systems and avionics, everything we build powers the next era of New Space. Join our small, agile, and mission-driven team where your work has real impact and your growth has no limits. We’re not just reaching for the stars—we’re engineering them. Let’s innovate the infinite, together. A DAY IN THE LIFE: As a Digital Modem Design Engineer, you will lead the end-to-end development of advanced satellite and tactical communication systems, including waveform design, algorithm development, hardware implementation, testing, and performance optimization. Utilizing state-of-the-art technologies such as FPGAs, SoCs, ADCs, and DACs, you will design and implement high-performance digital modems that support secure, reliable, and resilient communications in mission-critical environments. This role offers the opportunity to tackle complex engineering challenges and make key technical decisions while collaborating closely with RF engineers, embedded software developers, and system architects to advance the next generation of satellite and tactical waveform technologies. WHAT YOU'LL DO: • Design Digital Modulators: Create and develop digital modulators specifically for satellite wireless communication systems, ensuring they meet required specifications and customer needs., • Utilize Digital Programmable Technology: Work with technologies such as Field Programmable Gate Arrays (FPGA), System on Chip (SoC), Analog to Digital Converters (ADC), and Digital to Analog Converters (DAC) to implement designs effectively., • Develop Tactical Waveforms: Design tactical waveforms, including Link-16, based on customer requirements, ensuring robust and reliable performance., • Implement on Hardware Platforms: Oversee the implementation of designs on various hardware platforms, ensuring proper functionality and performance., • Testing and Evaluation: Conduct testing and evaluation of modem performance, including system bring-up and design validation testing using RF test equipment and automated test systems., • Design and Simulation: Use tools such as Matlab/Simulink for design, simulation, performance analysis, and optimization of waveforms to meet project specifications., • Generate Documentation: Create comprehensive documentation for designs and processes, ensuring clarity and compliance during formal reviews., • Collaborate with Teams: Work successfully in a team environment, contributing to design reviews and collaborating with other engineers to ensure project success., • Agile Project Techniques: Apply Agile project management techniques to manage multiple projects simultaneously, maintaining focus and timely completion., • Digital Modem Design: Strong technological background in digital modem design, enabling the creation of effective communication systems., • RF and Microwave Components: Familiarity with RF and microwave components, including oscillators, mixers, attenuators, amplifiers, couplers, and isolators., • Bachelor’s Degree in a related field (Computer Science, Engineering, etc.) is required., • 5 or more years of experience in digital modem design, waveform development, or related fields., • Must have a strong technological background in digital modem design., • Proficiency in Matlab, Simulink, VHDL/Verilog, and other signal processing and hardware design tools., • Experience with FPGAs, SoCs, ADCs, DACs, and embedded processor architectures., • Familiarity with Radio Frequency (RF) and microwave components: oscillators, mixers, attenuators, amplifiers, couplers, isolators, Printed Circuit Boards (PCB)., • Ability to analyze, troubleshoot, and optimize modem performance using RF test equipment., • Experience with embedded processor and software integration and interoperability with digital designs., • Familiarity with Agile project methodologies and the ability to work on multiple projects simultaneously., • Strong problem-solving skills and the ability to develop innovative solutions to complex technical challenges., • 401(k) with 3% company match (automatic enrollment), • Comprehensive medical, dental, vision, HSA & life insurance, • 10 paid holidays + 120 hours PTO (starting in year one), • Flexible Work-Life Balance: Enjoy a 9/80 work schedule with every other Friday off—whether you use it to recharge, work on a passion project, or spend time with family, the choice is yours., • Continuous Learning & Development: We’re serious about professional development. From tuition reimbursement to internal "Ask Me Anything" sessions and weekly “Lunch & Learns,” we make learning a core part of the job. YOU SHOULD KNOW: Potential new employees must successfully complete a background check which includes criminal search, education certification and employment verification prior to hire. Applicants must be authorized to work for any employer in the U.S as you must have the ability to obtain a security clearance. We are unable to sponsor or take over sponsorship of an employment Visa. A NOTE TO STAFFING AGENCIES: Innoflight does not accept unsolicited resumes from agencies, recruiters, or any third-party sources. Any such submissions will be considered property of Innoflight, and no fees will be paid in the event a candidate is hired from an unsolicited referral. To California residents applying for this job, please read Innoflight’s CCPA Notice: . #LI-Onsite Powered by JazzHR bTE1ZxA70n

Job DescriptionDescription: This position requires active U.S. national security clearance and the ability to obtain one. To learn more about the security clearance process please access this link. Additionally, travel may be required to customer and subcontractor sites as well as other office locations. This position is with Highbury Defense Group, an Accelint company. Accelint is dedicated to delivering mission-critical technology and defense solutions that accelerate innovation, readiness, and national security outcomes. We provide technical, cybersecurity, logistics, and program management support to US Department of Defense (DoD) and Department of State (DoS) agencies and select foreign governments and militaries. Our experience spans decades of operational and strategic support to the DoD, DoS, US Navy, USMC, USAF, and US Army. Our people range from retired and separated military to seasoned defense contractors to new grads. Our success stems from our drive to always provide objective, effective, and cost-efficient advice and solutions to our customers. We are seeking a highly motivated Model-Based Systems Engineer (MBSE) to support a variety of Department of Defense (DoD) and Department of Navy (DoN) Communications and GPS Navigation programs. The ideal candidate will bring deep expertise in MBSE methodologies, tools (such as Cameo/MagicDraw), and DoD acquisition processes to develop and maintain digital system models throughout the system lifecycle. This role requires the ability to work closely with cross-functional teams, customers, and stakeholders to ensure system design integrity and compliance with government standards. • Develop and maintain system architecture models using SysML and MBSE tools (e.g., Cameo/MagicDraw, Rhapsody, Enterprise Architect), • Facilitate the development of Black Box and White Box models in accordance with DoD and NAVWAR standards, • Work closely with program engineering teams to develop questionnaires to identify what data is available for each program that can feed into a model, then help match programs with the appropriate MBSE automation tool(s) and enter data into the appropriate MBSE tool., • Integrate MBSE approaches with traditional systems engineering practices and digital engineering frameworks, • Translate stakeholder requirements into system models and technical specifications, • Participate in or lead technical reviews, model-based design efforts, and system verification/validation planning, • Collaborate with software, hardware, and integration teams to align models with implementation and testing, • Support DoD acquisition documentation and milestone reviews (e.g., SRR, PDR, CDR), • Ensure models comply with DoD standards (e.g., DoDAF, UAF, MIL-STD-881, NIST 800-160 Vol 1/2), • Prepare technical documentation and present modeling results to stakeholders, including government clients, • Maintain configuration control of models and support versioning and reuse strategies Requirements: Required Qualifications: • 5+ years of experience in systems engineering with at least 2 years in MBSE roles., • Proficiency in MBSE tools such as Cameo/MagicDraw, Rhapsody, or Enterprise Architect., • Experience with Black Box and White Box modeling and development., • Experience with SysML and formal modeling techniques including Black and White Box Models., • Familiarity with DoD systems lifecycle (DoDI 5000.02, JCIDS, etc.) and C4I engineering processes., • Experience supporting DoD programs (Army, Navy, Air Force, Space Force, or OSD)., • Active Secret clearance required., • Bachelor's in systems engineering, Aerospace, Electrical Engineering, Computer Science, or a related field. Clearance Information: Some positions will require access to U.S. National Security information. Positions that require this access will be required to receive and maintain a U.S. government personnel security clearance (PCL). In order to qualify for this position, the candidate must be a US Citizen and either currently possess this National Security eligibility or be able to complete the investigation application process with a favorable determination and maintain that eligibility throughout their employment. EEOC & Know Your Rights: Accelint companies are Equal Opportunity Employers. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, status as a protected veteran or any other status protected by applicable federal, state, and local law. We ensure that all employment decisions, including hiring, promotion, compensation, and other terms and conditions of employment, are based on merit, qualifications, and business needs. For more information about your rights, please review the "Know Your Rights" poster from the Equal Employment Opportunity Commission (EEOC). ADA: In compliance with the Americans with Disabilities Act (ADA), if you have a disability and would like to request an accommodation within the application and selection process, please contact . E-Verify: Accelint companies utilizes E-Verify to confirm employment eligibility to work in the United States. Verification occurs after the employee has been hired and completes the Form I-9. Salary Range: $120,000-159,871. The listed pay scale reflects the broad, minimum to maximum, pay scale for this position for the location for which it has been posted and is not a guarantee of compensation or salary. Other compensation considerations may include, but are not limited to, job responsibilities, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, or other applicable factors. Benefits include: • Paid Time Off, • Paid Company Holidays, • Medical, Dental & Vision Insurance, • Optional HSA and FSA, • Base and Voluntary Life Insurance, • Short Term & Long-Term Disability Insurance, • 401k Matching, • Employee Assistance Program

Job Description Who is Senior plc? Senior plc is an international, market-leading, engineering solutions provider with 26 operating businesses in 12 countries. Senior designs, manufactures and markets high-technology components and systems for the principal original equipment producers in the worldwide aerospace, defense, and land vehicle and power & energy markets. The Group is split into two divisions, Aerospace and Flexonics, servicing five key sectors. Our global values underpin what we do, and how we do it … Safety – Integrity – Customer Focus – Respect & Trust – Accountability – Excellence Who is Senior Operations SoCal? We are a technology-driven, team-oriented company that takes pride in the relationships we build with our customers, suppliers and with each other. We offer exciting career opportunities in afast-paced, dynamic team environment and reward employees who are motivated, innovative, and results-oriented. We are looking for dedicated individuals to join us in engineering solutions for our customers. We are currently seeking a full-time CNC Machinist III for 2nd shift (3:00 PM - 11:30 PM) Monday - Friday at our Jet Products facility located in Kearny Mesa. We offer a 5% differential pay for our 2nd shift hours. What Does the Job Involve? The CNC Machinist III is responsible for the set up and operation of computer numerical control (CNC) machines to include Lathe, Mill and Vertical Turret Lathes (VTL.) Operates the machine and produces precision metal parts and materials. Determines dimensions and tolerances of material for machining, sequences of operations required by studying specifications such as blueprints and sketches. Follows instructions outlined in routers and technical planning documents and adhere to established specifications. Executes complex to potentially difficult machining assignments using machine tools ranging from multiple axis lathes to mills. Uses precision measuring tools to check accuracy of work. What will my responsibilities include? • Sets-up, adjusts and operates machine controls to position tools or regulate cutting depth, speed, feed or coolant flow to produce precision metal parts and materials as specified by work order, blueprints, drawing, templates or layout., • Mounts, aligns, and secures tooling, attachments and work-piece on machine chuck. Starts and stops automatic operation of numerical control machine parts or test setup, work-piece dimensions or programming. May adjust machine controls when automatic programming is faulty or if machine malfunctions., • Monitors and maintains machines during use in order to diagnose machine malfunctions, need for adjustments or repairs. May perform routine machine maintenance including checking coolant and positioning of machine., • Demonstrates ability to start and stop automatic operation of numerical control machine or test set up, work-piece dimensions or programming., • Ensures proper dimensions of finished material to ensure conformance to specifications., • May clean machine, tooling and parts and area surrounding machine in accordance with 5S procedures., • Demonstrates ability to appear for work on time, follows directions from a supervisor, interacts well with co-workers, understands and follows work rules and procedures, complies with corporate policies, goals and objectives, accepts constructive feedback and exhibits initiative and commitment., • Participates in Daily Management board meetings and willing to discuss Safety, Quality, Delivery, Efficiency and Utilization., • Proactively identifies opportunities to improve machining processes and efficiency., • Ability to read basic blueprints, drawings, or templates; including dimensional, true position, and circularity call outs., • Shop mathematics, GD&T (Geometric Dimensioning & Tolerancing), and Feeds & Speed calculations., • Knowledge of machines, controllers, and tools (Fanuc or Mazak.), • Ability to control operations of equipment and watch gauges, dials, or other indicators to ensure machine is working properly., • Ability to set up fixtures properly including clamping, centering, and indicating of fixture., • Ability to set up cutting tools and change out inserts for cutting operation. Education: Joining Senior means not only a rewarding career with a tight-knit and collaborative team, but you will also enjoy a competitive compensation package that includes a market-led base salary, and a comprehensive benefits package along with wellness benefits, employee recognition program, matching 401k plan, paid vacation, employee wellness activities, tuition reimbursement, and community involvement initiatives. If offer of employment is made it will be contingent upon passing all of the following: Drug Test, Background Check,ITAR and U.S. Export Compliance Screening. Equal Opportunity Employer: minority/female/disability/veteran Access to our facility (and, therefore, employment) is restricted under the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR) to U.S. Citizens, lawful permanent residents, U.S. refugees, asylees or temporary residents under amnesty provisions [as defined in 8 USC 1324b(a)(3)] and properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for trade compliance control purposes. Additionally, potential employee’s names will be screened against the Consolidated Screening List (maintained by the United States government) to determine eligibility to receive technical data. Machines & technologies you'll use: • CNC Mill (5+ axis VMC) (Fanuc), • CNC Lathe (5+ axis) (Mazak)

Job Description Job Summary Installs, maintains, and repairs ship's propulsion and auxiliary systems; including, but not limited to, Steam, Turbine, Electrical, and Diesel propulsion systems, rudders and steering gear, elevators, and Navy UNREP systems. Installs, repairs, and maintains ship's fluid systems which include pumps, compressors, purifiers, heat exchangers, actuators and valves. Tests equipment to ensure systems meets specifications. Installs and tests various shop equipment. Performs other related tasks as assigned, some of which may become essential to the position. Qualification Standards High school or equivalent education. Minimum three years of experience in a related field, or graduate of a Diesel or Aircraft Mechanic training school, or three years in any of the following Navy ratings: MM (BT), AD, CM, EN, GS, HT, or MR. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Essential Job Tasks Must have the ability to read and interpret mechanical drawings, written instructions/ technical manuals. Must read have the ability to read and comprehend hydraulic and pneumatic diagrams. Must be capable assembling/ installing complex mechanical systems, while meeting alignment criteria of systems and equipment. Proficient in use of precision measurement tools. Must understand both Imperial and Metric measuring systems. Must have shop mathematic skills, with understanding of geometry, trigonometry, and work with decimals and fractions. Must maintain constant safety awareness. Ability to safely use hand and power tools and portable machining tools. Other job duties as may be assigned relevant to the trade. Materials & Tools Equipment Hand, power, and portable machining tools. Personal protective equipment required. Physical/Mental Involvement Color vision. Frequent to continuous lifting of machining tools and equipment, up to 50 lbs. Standing, balancing, walking, climbing ladders or equipment, reaching above shoulder or out in front, manual dexterity, pushing, pulling, kneeling, bending, seeing, hearing and occasionally lowering self into confined spaces, crawling through small openings and working in reclined positions, as needed. Works in all areas of the shipyard and on board ships. Hearing warning signals and reading and comprehending safety instructions. Must be able to maintain general safety awareness and avoid hazards commonly present in employee’s work area. Environmental Factors Exposure to fumes, odors, dust, chemicals, and gases, various temperatures and ventilation, all which can cause discomfort or respiratory difficulties. May work in awkward positions or postures. Exposure to constantly moving machines and mechanical parts and high levels of constant noise Ameri-Force Benefits As part of the Ameri-Force team, a recognized ESOP company, you have a personal stake in the collective success of the organization, fostering a collaborative and rewarding work environment. Our competitive benefits package includes: · Industry Leading Pay · Medical Coverage · Dental Coverage · Vision Coverage · Short Term Disability Benefits · Term Life Benefits · Referral Bonuses *Referral Bonuses are available for specific jobs only About Ameri-Force Since 1991, Ameri-Force has been a leader in skilled trades staffing, offering a people-focused approach that provides competitive advantages for our clients and rewarding career opportunities for our contract employees. Leveraging our deep expertise in maritime, manufacturing, aerospace, industrial, and energy sectors, we ensure a seamless experience by efficiently managing federal and state taxes, unemployment, and worker’s compensation. In addition, we offer a comprehensive benefits package, including medical, dental, vision, short-term disability, and life insurance, tailored to meet the needs of our workforce. Join Ameri-Force and be part of a company that values your success. Learn more at ameriforce.com • Note: The specific duties, skills and qualifications may vary depending on the company’s requirements and the nature of the tasks performed at the site. Employees must be willing to make reasonable adjustments to their tasks depending on the requirements of the client. We are an equal opportunity employer. We do not discriminate based on race, color, creed, religion, national origin, ancestry, citizenship status, marital status, age, sex, sexual orientation, gender identity, disability, veteran status, or any other protected characteristic as established by law. Pay: $41/hr

Job Description Responsibilities: • Conduct internal audits for AS9100 Rev D compliance in preparation for the client's surveillance audit in August 2025., • Audit to cover both manufacturing (onsite) and sales/quoting (remote) operations., • Two audits in total (Onsite + Remote)Technical Qualifications and Certifications:, • Certified AS9100 Lead Auditor (Exemplar Global or ANAB preferred), • Minimum 3 years of AS9100 Rev D auditing experience, • Certified AS9100 Lead Auditor (preferably Exemplar Global or ANAB recognized), • Strong knowledge of aerospace manufacturing quality management systems, • Familiarity with manufacturing and sales/quoting operations, • ISO 9001 auditing background is a plus, • Technical background in aerospace, engineering, or quality assuranceIndustry Experience:, • Experience in the printed circuit board manufacturing industry, • Aerospace manufacturing and quality systems auditingNOTE, • Contract Type: 1099 contract (Part Time), • CURRENT OPPORTUNITY is Short-term audit engagement (specific duration to be confirmed). Project duration varies from client to client in a 1099 contractual project, • Shift Hours: Standard business hours (exact timing to be coordinated). May include full-day shifts or partial-day inspections based on project needs. Shift hours vary from client to client in a 1099 contractual project, • Work Location: Escondido, CA 92029 || Remote audit: MLT office, Irving, TX

Job Description IPS - MAST Technologies is seeking a General Manager who oversees and manages various aspects of a business unit or broader processes. Creates and establishes department policies and objectives while aligning with strategic corporate direction. The primary duties of this job require management of business or department. Responsibilities include hiring and firing subordinate employees (or effectively recommending such decisions), interviewing, selecting, and training employees; setting and adjusting rates of pay and hours of work; directing employees’ work; maintaining production records for use in supervision; appraising employees’ productivity and efficiency for recommending promotions or other changes in status; handling employee complaints and grievances; disciplining employees; assigning work among employees; and providing for the safety and security of the employees. Consistent exercise of independent judgment and discretion in matters of significance About IPS: Integrated Polymer Solutions (IPS) is a leading developer and manufacturer of advanced materials and engineered components, specializing in high-value end markets such as aerospace, defense, medical, semiconductors, robotics, energy, and industrial applications. IPS is comprised of 10 highly respected brands, each recognized for their expertise and innovation: AkroFire, ABBA Roller, Icon Aerospace Technology, IRP Medical, MAST Technologies, Northern Engineering Sheffield (NES), Rubbercraft, Swift Textile Metalizing (STM), RMB Products, and SPIRA Manufacturing. Our extensive product portfolio includes elastomeric seals, gaskets, tooling, hoses, ablatives, survivability tiles, coatings and tapes, EMI and thermal shielding, electrically conductive metalized fabrics, and encapsulated O-rings—all designed to meet the most demanding performance requirements in mission-critical applications. Job Accountabilities: • Oversees various business operations aspects or broad processes within the business unit/the global function, • Creates plans, develops and establishes policies to facilitate business units or business processes to meet objectives in accordance with strategic corporate direction, • Collaborates with business unit leaders to formulate strategies that satisfy business and customer requirements, • Performs data analysis from business unit processes and communicates metrics to upper management, • Works within budget to allocate staff and other resources to ensure that operations run smoothly and best utilize available funding to meet departmental objectives, • Develops and supports a cross functional culture of continuous improvement, • Schedules workload to meet priorities; achieving all performance related targets, • Leads and directs work for team of employees as defined by business needs, • Manages staff selection, performance, development and training processes to ensure team competencies and capabilities to reach the business goals and expectations, • Other responsibilities as assigned Job Specifications: Education: Post-secondary degree in Business Administration or Management or equivalent combination of relevant education and work experience that will allow successful performance of job expectations Years’ Experience: 10 - 15 years of relevant experience Skills: • Strong leadership and management skills to enable the creation of highly effective operational processes, • Demonstrated ability to execute functional business plans and contribute to the development of functional strategy, • Ability to anticipate internal or external business challenges/regulatory issues and make recommendations, • Capable of directing the resolution of highly complex or unusual business problems, while applying advanced analytical thought and judgment, • Ability to absorb and apply new technical information and evaluate implications, • Demonstrates a high level of ethical behavior in exercising judgment and discretion in matters of significance, • Excellent interpersonal, written and oral communication skills with the ability to negotiate and influence, while exercising sensitivity to the audience, • Proficient in Microsoft Office Suite and database management tools Benefits: At Integrated Polymer Solutions, we recognize how important your career and benefits are to you and your family. We offer a full suite of benefits, including medical, dental, vision, short and long-term disability coverage, accident insurance, critical illness insurance, basic and supplemental life insurance, employee assistance plan, retirement savings and matching, and other developmental opportunities. We are committed to supporting the way you live and work. IPS is an Equal Opportunity Employer Veterans/Disabled - Affirmative Action Employer. This position requires using information subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. (Actual placement within the salary range is dependent on multiple factors, including but not limited to skills, education, experience and location)

Job Description Veridiam is a strategic manufacturing partner with over 60 years of experience serving the aerospace, industrial, medical, and nuclear markets. Our roots were formed in the exacting nuclear and aerospace industries, expanded into Medical where we have supplied critical components to a global customer base. We currently provide elegant solutions across a broad range of customers and diverse markets. At Veridiam we recognize that talent is at the forefront of our organization and define who we are in today's industry. POSITION SUMMARY Supports teams and departments compliance requirements. Monitor and interpret trade guidelines, export licenses and classifications under various government entities. Maintain and track documentation for international shipments or exports. Participate in internal and external audits, investigations and inquiries. ESSENTIAL DUTIES AND RESPONSIBILITIES • Monitor and interpret trade guidelines including but not limited to assessing product eligibility under Export Administration Regulations (EAR) and assigning accurate Export Control Classification Numbers (ECCN) and other agency classifications based on product attributes., • Oversee and maintain export licenses, including compliance with the International Traffic in Arms Regulations (ITAR) and EAR., • Develop and maintain standard operating procedures related to global trade compliance and logistics., • Determine and validate proper Harmonized Tariff Schedule (HTS) codes and proper Schedule B (Statistical Classification of Domestic and Foreign Commodities) classification., • Prepare and audit shipping documentation, invoices, packing lists, certificates or origin and customs declarations., • Maintain and track country of origin and customs valuation documentation and ensure accuracy with the North American Free Trade Agreement (NAFTA)/United States Mexico-Canada Agreement (USMCA)., • Ensure adherence to trade compliance requirements/policies with the U.S. Customs and Border Protection (CBP) and Bureau of Industry and Security (BIS)., • Monitor license use, permits, expiration dates and re-export conditions., • Maintain detailed records of all import/export activities for audit and internal control purposes, • Conduct effective communication with requestors and internal customers to obtain product information or use source systems/activity to enable the correct classification of exported and imported material., • Assist with UTAS investigations, audits, corrective actions and voluntary disclosures., • Support and assist with internal and external audits, including government inquiries and internal assessments., • Provide and assist with training as needed or required., • Demonstrates ability to appear for work on time, follow directions from a supervisor, interact well with co-workers, understand and follow work rules and procedures, comply with corporate policies, goals and objectives, accept constructive feedback, establish goals and objectives, and exhibit initiative and commitment. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals to perform the essential functions. Education and Experience: • Bachelor’s degree in International Business or equivalent education and experience., • 3-5 years’ import/export operations and trade compliance preferred., • Ability to apply critical thinking and a high attention to detail., • Strong analytical and problem-solving skills., • Strong written and verbal communication skills., • Ability to manage multiple priorities and deadlines. Pay Rate: The final salary offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and length of experience within the job, type, and length of experience with the industry, education, geographic location, etc. Veridiam is an Equal Employment Opportunity/Affirmative Action Employer. Veridiam will recruit, hire, train and promote persons into all jobs without regard to age, race, color, religion, ancestry, medical condition, sex, sexual orientation, gender identity, national origin, status as a veteran or status as an individual with a disability or any other characteristic or classification protected by law. Access to our facility (and, therefore, employment) is restricted under the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR) to U.S. Citizens, lawful permanent residents of the United States and properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes.

Job Description Computer Technologies Consultants (CTC) is seeking an experienced Database Engineer to support our clients team in San Diego, CA. With offices in Washington DC and San Diego, CA, CTC is a leading technology company providing lifecycle IT, data analytics, cloud, agile software development, DevOps, Test Automation, Cyber Security, and infrastructure solutions. Additionally, we provide Professional Talent Acquisition Services as we proudly support the unique needs of U.S. Defense, Intelligence, and Federal Civilian agencies as well as Fortune 1000 companies. What's in it for you? • Full time opportunity, • Competitive Salary, • Work for an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services Job Description: The qualified candidate will have 6 to 8+ years of database development and administration experience to join an engineering team in defining and developing significant upgrades to an enterprise-wide Imagery Archive and Geospatial Intelligence System. The candidate will work as part of a multi-disciplinary engineering team to design, code, test, and deploy new database configurations in a rapid development environment, and will support a large, complex systems capable of ingesting large amounts of data. This position may require business travel in support of customer meetings and operational system deployment and support activities. Required Education, Experience, & Skills • US Citizenship with an active Top Secret clearance, • Bachelors degree in engineering/technical discipline, • 6 to 8+ years database development and administration experience across the entire development lifecycle, • Strong experience as an Oracle developer with Oracle RDBMS versions 12c and 19c, • Strong experience in building Oracle PL/SQL functions, procedures, packages and types, • Strong experience with SQL query syntax, • Strong experience with Oracle basic server operations including pluggable database, • Strong experience on RHEL Linux versions 7/8 (including bash and csh shell programming), • Strong experience with database design and development processes, • Strong experience with Oracle STIG and hardening related procedures, • Experience with AWS RDS, • Experience with Jira and Git, • Familiarity with Oracle Instant Client installation, • Team player with a proactive attitude and the ability to be productive in a highly secure, and dynamic/collaborative environment, • Strong oral and written communications skills Preferred Education, Experience, & Skills • Hold an active Top Secret/SCI with Polygraph clearance, • Bachelor of Science degree in Computer Science or related field, • Experience with DAO related programming in C++ or JAVA, • Experience with Oracle Spatial option, • Experience with Oracle RAC basic operations, • Experience with Oracle Label Security (OLS) option, • Experience with Oracle Identity Management (OIM) and Enterprise User Security (EUS), • Experience with Oracle Dataguard Security Clearance: • Must have a Top Secret clearance. Candidates with Top Secret/SCI and Polygraph are preferred. Pay Information Full-Time Salary Range: $140k - $220k Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Benefits/Perks • 401(k) matching, • Accident and Hospital Indemnity Insurance, • Dental Insurance, • Disability Insurance, • Employee Referral Bonus Program, • Employee Assistance Plan, • Flexible spending account, • Health insurance, • Life insurance (Term and Universal Life w/Long Term Care benefits), • Paid time off (Vacation, Sick leave, and 11 Federal Holidays), • Professional development assistance/Tuition reimbursement Program, • Profit Sharing Retirement Program, • Vision insurance Computer Technologies Consultants, Inc. is an Equal Opportunity Employer that provides employment opportunities for all qualified applicants without regard to race, color, religion, gender identity and/or expression, sexual orientation, age, mental or sensory differing abilities, protected veteran status, sex, national origin, or any other characteristic protected by applicable law. Computer Technologies Consultants, Inc. is devoted to diversity, equity, and inclusion.

Job Description Who We Are: Quest Global delivers world-class end-to-end engineering solutions by leveraging our deep industry knowledge and digital expertise. By bringing together technologies and industries, alongside the contributions of diverse individuals and their areas of expertise, we are able to solve problems better, faster. This multi-dimensional approach enables us to solve the most critical and large-scale challenges across the aerospace & defense, automotive, energy, hi-tech, healthcare, medical devices, rail and semiconductor industries. We are looking for humble geniuses, who believe that engineering has the potential to make the impossible possible; innovators, who are not only inspired by technology and innovation, but also perpetually driven to design, develop, and test as a trusted partner for Fortune 500 customers. As a team of remarkably diverse engineers, we recognize that what we are really engineering is a brighter future for us all. If you want to contribute to meaningful work and be part of an organization that truly believes when you win, we all win, and when you fail, we all learn, then we’re eager to hear from you. The achievers and courageous challenge-crushers we seek, have the following characteristics and skills: The First Article Inspection (FAI) is a business method that determines whether the manufacturing process for a part is capable of consistently delivering parts that conform to AS9102C industry specifications. What You will Do: • Preparing the First Article Inspection utilizing software such as DISCUS to balloon the drawing and compile the AS9102C package to release manufacturing to record the actuals associated with this process, gathering all the necessary information required to include in the FAIR package., • Delivery of the First Article Inspection package to manufacturing to record and verify what’s called out on the engineering drawing., • Compile the actuals and populate them using ballooning software to compile the AS9102C (Forms 1,2, and 3) and create the First Article Inspection Reports (FAIRs)., • Import the First Article Inspection Package to Net Inspect, • Notify manufacturing and quality of the recorded non-conformances, ensuring that the necessary actions have been taken to prevent the recurrence., • Compile FAI metrics to present to the leadership team the status and open actions to drive closure., • Associate’s degree in Manufacturing, Mechanical, or Industrial Engineering, or the absence of a degree from technical school, or apprenticeship, 2-4 years; BS in Mechanical Engineering in preferred, • Experience in First Article Inspection compile package use of electronic ballooning software per AS9102 requirements., • Experience in DISCUS and Net Inspect, • Proficient with GD&T, • Thorough knowledge and experience of AS9100 and EN/AS9102C, • Planning and organizing skills to ensure multiple tasks are prioritized and monitored to deliver set objectives., • Capability to identify sustainable business improvements & and ensure effective implementation., • Recognize and understand internal and external customer requirements and respond to them. Ability to communicate and influence effectively at all levels of the organization., • Highly self-motivated and demonstrates determination and persistence to deliver results despite obstacles and setbacks., • Recognize and understand regulatory and certification requirements, • Excellent interpersonal skills, • Familiar with SAP, • Good working knowledge of Microsoft Office packages (PowerPoint, Word, and Excel) Compensation decisions are made based on factors including experience, skills, education, and other job-related factors, in accordance with our internal pay structure. We also offer a comprehensive benefits package, including health insurance, paid time off, and retirement plan. Work Requirements: This role is considered an on-site position located in Mexicali, Mexico with some travel to Chula Vista, CA. • You must be able to commute to and from the location with your own transportation arrangements to meet the required working hours. Citizenship requirement: Due to the nature of the work, U.S. citizenship is required. Job Type: Full-time, temporary role for 6 months Company DescriptionWe are Quest Global. We’re in the business of engineering, but what we’re really building is a brighter future. It’s not just what we do, but why we do it that makes us different. We believe engineering has the unique opportunity to solve the problems of today that stand in the way of tomorrow. For 28 years, we have strived to be the most trusted partner for the world’s hardest engineering problems. As a global organization headquartered in Singapore, we live and work in 17 countries, with 56 global delivery centers, driven by 18,000+ extraordinary employees who make the impossible possible every day. Quest Global brings deep industry knowledge and digital expertise to deliver E2E global product engineering services. We bring together technologies and industries alongside the contributions of diverse individuals and their areas of expertise to solve problems better, faster. This multi-dimensional approach enables us to solve the most important and large-scale challenges across the Aerospace & Defense, AutoWe are Quest Global. We’re in the business of engineering, but what we’re really building is a brighter future. It’s not just what we do, but why we do it that makes us different. We believe engineering has the unique opportunity to solve the problems of today that stand in the way of tomorrow. For 28 years, we have strived to be the most trusted partner for the world’s hardest engineering problems. As a global organization headquartered in Singapore, we live and work in 17 countries, with 56 global delivery centers, driven by 18,000+ extraordinary employees who make the impossible possible every day. \r\n\r\nQuest Global brings deep industry knowledge and digital expertise to deliver E2E global product engineering services. We bring together technologies and industries alongside the contributions of diverse individuals and their areas of expertise to solve problems better, faster. This multi-dimensional approach enables us to solve the most important and large-scale challenges across the Aerospace & Defense, Auto

Job Description Computer Technologies Consultants (CTC) is seeking a Senior Cyber Architect to support our clients team in San Diego, CA. With offices in Washington DC and San Diego, CA, CTC is a leading technology company providing lifecycle IT, data analytics, cloud, agile software development, DevOps, Test Automation, Cyber Security, and infrastructure solutions. Additionally, we provide Professional Talent Acquisition Services as we proudly support the unique needs of U.S. Defense, Intelligence, and Federal Civilian agencies as well as Fortune 1000 companies. What's in it for you? • Full time opportunity, • Competitive Salary, • Work for an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services Job Description: We are seeking a Senior Cyber Architect. The qualified candidate will be working on and possibly leading security engineering teams supporting cybersecurity engineering activities in a rapid development environment to support the specification, development, and application of computer security technologies, cybersecurity and information assurance management techniques to DoD systems. Tasks may include: • Leading systems engineering teams, • Leading Assessment and Authorization (A&A) activities for DoD Systems in accordance with Risk Management Framework, • Supporting traditional systems engineering tasks such as CONOPS, requirements development and allocation, cyber design engineering, cyber implementation engineering, verification and Validation, and continuous monitoring efforts during deployment, Operations and Sustainment, • Supporting offensive architecture analysis and design of defense-in-depth solutions, • Supporting Development Security Operations (DevSecOps) integration, • Developing and assessing system security plans including, security concepts of operation, risk management matrix, security control traceability matrix, security test procedures, and plan of action and milestones, • Conducting and analyzing vulnerability assessments to validate system compliance with RMF controls and DISA Security Technical Information Guidelines (STIG), • Analyzing static code scans and dynamic code scans to validate Application Security and Development STIG compliance, • This position may require business travel to customer locations in support of customer meetings, product demonstration, Integration and/or systems testing. Required Education, Experience, & Skills • Active Top Secret clearance., • Bachelor of Science degree in a Cyber, Systems, Software, Electrical, Mechanical or similarly related engineering/technical discipline, and 6+ year(s) related experience or equivalent experience, training and/or certifications., • ISC2 CISSP or equivalent certification, • Strong engineering skills, interpersonal skills, and the ability to effectively build and lead teams, • Extensive experience with traditional A&A tools: ACAS Nessus, SCAP Scanner, STIG Viewer, • Demonstrated expertise in national Cybersecurity policies, DoD A&A processes and procedures and industry best practices on complex systems, • Expertise in vulnerability assessment, control allocation and risk mitigation Preferred Education, Experience, & Skills • Other cyber certifications (CISSP-ISSAP, CISSP-ISSEP, CCSP, CEH, OSCP, etc.), • Top Secret/SCI security clearance by the Federal Government, • Understanding of offensive security tactics, techniques and procedures, • Experience with Cyber Failure Mode, Effects, and Criticality Analysis (FMECA), • Experience writing proposals with innovative cost-effective solutions, • Experience with Open Container Initiative (OCI) including Platform One, Iron Bank and Repo One, • Experience with offensive architecting, threat modeling and attack vector analysis, • Experience with cloud and cross domain solution accreditations, • Ability to negotiate effectively withhigher level managers, functional managers,customers, industry partners, and teammates, • Demonstrated leadership skills (supervisory experience, building teams, building customer relationships), • Ability to support proposal and cost activities, • Working knowledge of Earned Value Management System (EVMS) systems and Project management tools such as Cost Performance Index (CPI) and Integrated Master Schedule (IMS), • Experience with leading and coordinating security test events to achieve accreditation milestones, • Experience with verifying and validating vulnerability resolutions and/or mitigations, • Experience with supporting proposal and cost estimate activities, • Experience with Attack and Threat modeling, • Strong mentoring skills, • Good planning and organizational skills, • Strong oral and written communications skills Security Clearance: • Must have an active Top Secret/SCI clearance., • Candidates with Top Secret/SCI and Polygraph are preferred. Pay Information Full-Time Salary Range: $110k - $190k++ Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Benefits/Perks • 401(k) matching, • Accident and Hospital Indemnity Insurance, • Dental Insurance, • Disability Insurance, • Employee Referral Bonus Program, • Employee Assistance Plan, • Flexible spending account, • Health insurance, • Life insurance (Term and Universal Life w/Long Term Care benefits), • Paid time off (Vacation, Sick leave, and 11 Federal Holidays), • Professional development assistance/Tuition reimbursement Program, • Profit Sharing Retirement Program, • Vision insurance Computer Technologies Consultants, Inc. is an Equal Opportunity Employer that provides employment opportunities for all qualified applicants without regard to race, color, religion, gender identity and/or expression, sexual orientation, age, mental or sensory differing abilities, protected veteran status, sex, national origin, or any other characteristic protected by applicable law. Computer Technologies Consultants, Inc. is devoted to diversity, equity, and inclusion.

Job DescriptionDescription: SSI is seeking an experienced Senior Space Systems Engineer to support the U.S. Space Force’s Space Systems Command (SSC). DUTIES AND RESPONSIBILITIES: • Serve as a bridge between CGN Space & Ground (SLE and baseline), CGN Engineering, CGM (logistics and maintenance), and future iterations of these units, supporting collaboration and resolving conflicts, • Ensure consistent, two-way communication between branches and organizations that operate independently, • Support identification, clarification, and codification of technical and programmatic risks, • Advise leadership on risk tradeoffs and propose mitigation strategies while balancing mission assurance, cost, and schedule, • Support and collaborate with the space engineering team to provide operational and sustainment subject matter expertise, • Provide SME support to the Space Control Segment, offering feedback and recommendations to the Government team, • Advise space leadership on concerns, questions, or uncertainties regarding sustainment activities, • Ensure synchronization with CGN Baseline Space/Ground, SLE Space/Ground, ILS and engineering teams, • Assess and document SLE CONOPS, crypto systems (e.g., KG505A vs KG503), and ensure compatibility between ground and space systems, • Understand and support system security and system safety efforts (e.g. COMSEC/TRANSEC, program protection, cybersecurity, etc.) across domains and their impact on system certification and accreditation processes, • Support evaluation and tracking of Technical Performance Measures, • System Engineering Boards liaison (ARB, SERB, CCB, etc.) for Space Branch, to develop, review, and comment on packages to ensure space needs/LOEs are considered for submitted packages, • Provide orbital analysis support, including collision avoidance, visualization, station keeping, and relocation, • Track ownership, status, and content of SLE/BL/Ground specifications, • Secondary reviewer for SLE CDRL (Contract Data Requirements List) deliverables, • Provide structured feedback to vendors while maintaining neutrality, integrity, and fairness, • Review documentation in the vendor library; act as a backup reviewer to the Space Lead, • Review technical documents, files, emails, etc., and provide feedback and recommendations to the Government team (such as, but not limited to, On Orbit Handbook (OOH), Operational Perform File (OPF), Interactive Electronic Technical Manual (IETM)), • Collaborate, author, and assist with writing contract task orders, Statements of Work (SOW), Performance Work Statements (PWS), etc., • Support and facilitate Quarterly Constellation Status reviews and Space Sustainment Quarterly meetings, • Collaborate with the Narrowband SATCOM Product Support Manager (PSM) and operations stakeholders, providing SME-level sustainment support and transition-to-ops planning, • Contribute and collaborate to the development and sustainment of long-term goals (e.g., 5-year roadmap, advanced concepts, Space Warfighting Analysis Center (SWAC) mission designs, etc.), • Assist the Integrated Master Scheduler by communicating Space Branch activities and timelines to ensure accurate schedule outputsRequirements:, • Active Secret Security Clearance, • Bachelor of Science degree in Mechanical or Aerospace Engineering, Space Operations, or Physics; or equivalent technical field. Will substitute 8 years in lieu of a degree in addition to the required experience outlined above (minimum 18 years of experience without a degree), • Minimum of 10 years of experience in satellite systems engineering, • Strong understanding of both space and ground domains, including cryptographic systems, systems security, program protection and the ability to evaluate compatibility and risks across platforms, • Experience with MUOS or similar satellite systems is preferred, • Expert ability to identify, assess, and communicate technical and programmatic risks; advise on risk tradeoffs, and develop mitigation strategies that balance cost, schedule, and mission assurance PREFERRED QUALIFICATIONS: • Active Top Secret/SCI Security Clearance, • Master's degree in a relevant field, • Experience with satellite, ground, and cryptographic systems and sustainment operations, • Knowledge of military satellite communications systems and protocols, • Familiarity with industry standards and best practices for satellite systems engineering SSI is committed to non-discrimination and equal employment opportunity. All qualified applicants will receive consideration for employment without discrimination based on any characteristics protected by law. SSI is a HUBZone small business that provides professional services including systems engineering, information systems integration, and technology management services. SSI offers a generous array of benefits including: Employee Medical, Vision, Dental, and Prescription Drug Insurance Plans, 60% paid premium for dependents. SSI provides Life Insurance, Long Term Disability, and Short-Term Disability benefits at no cost. SSI employees receive 24 paid days off in the first year on board. We also provide Military Leave benefits, a 401(k) Retirement Plan, education assistance, Personal Technology Refresh and Employee Referral bonuses. Positions subject to Service Contract Act (SCA) have benefits provided as required by law.

Job Description Natilus is seeking an Airframe Design Engineer to join the team in San Diego, CA. Your primary task would be structural design of both metallic and composite parts. At Natilus, we work with a small team of highly adaptable engineers which enables us to accomplish the tasks of a much larger team. This gives you the opportunity to branch out into other technical disciplines such as mechanisms, manufacturing, stress analysis and tooling design as well as participate in the entire cradle-to-grave design process of multiple aircraft. Natilus is currently building a large 19,000lb unmanned aerial vehicle powered by twin turbo props. Our aircraft is a blended wing body with the sole purpose of carrying cargo. Making history utilizing multiple new technologies, it will be the first of its kind to fly and be put into production. The position is based out of San Diego and requires 20% travel. US Citzens or Permanent Residents may apply. Requirements • Fundamental knowledge of aircraft load paths, • Experience with bolted & bonded joint designs, • Expert understanding of composite structures detail design and fabrication, • Comfortable selecting and managing relationships with third party vendors & suppliers, • Proficiency in NX, CATIA, Unigraphics, or Solidworks, • Proficient in Fibersim, • A minimum of three years or directly related work experience, • Rapid prototyping experience taking a program from conceptual & preliminary design to detail build, • Experience with design as build manufacturing, determinate assembly, manufacturing planning & tooling design, • Experience analyzing initial part & joint sizing using hand calculations or FEA, • Aircraft homebuilding or other hands-on design or build experience, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays)

Job Description Description Q Microwave, a leader in the precision RF manufacturing, design and manufacture of cutting-edge military and defense microwave solutions, is seeking a RF System Engineer to join our entrepreneurial, collaborative, and fast-paced team located in El Cajon, CA. Q Microwave is recognized for its advanced capabilities in RF filtering and custom RF subassemblies—technologies that require deep technical knowledge and a passion for precision. Our fully vertically integrated facility in San Diego enables close collaboration between design and manufacturing, ensuring unmatched quality and performance in RF product development. As a part of Amphenol's global network of over 130 business units, Q Microwave operates with the technical focus and agility of a specialized design center while leveraging the strength, stability, and resources of one of the world's largest interconnect solution providers. In this role, you will be at the forefront of new product development, leading cross-functional teams to define system architecture and drive products from concept to full-rate production. The position demands a strong technical foundation in RF systems and subsystems, the ability to dissect complex requirements into functional designs, and a proactive engagement with customers and internal stakeholders alike. Requirements Key Responsibilities: • Designing top-level system architectures that encompass RF amplification, high-performance filtering, antenna integration, digital/analog controls, power, and embedded firmware/software., • Generate block/flow diagrams, interconnection drawings (ICDs), electrical schematics., • Generate models or simulations aiding in predicted performance for the system or RF filter products., • Evaluate specifications and product design targets including customer requirements, testing procedures, and drawing packages., • Generate technical content for product design updates, new product introduction, and production proposals, including generating production readiness assessments and cost/technical proposals., • Lead a cross functional team of electrical, mechanical, manufacturing engineering to execute product development and production readiness., • Demonstrate ownership of the full electrical product lifecycle—from initial design through material selection, production support, and final delivery—while collaborating closely with cross-functional teams, executive leadership, and end customers to ensure technical excellence and on-time execution., • Problem solve production issues related to electrical, mechanical, materials, and manufacturing aspects in a high product mix production environment., • Assist in the design optimization of RF performance including circuit analysis and simulation, component, material, and process selection, PCB layout and mechanical packaging., • Team up with technicians and assemblers on test, tune, and debug of RF products to optimize performance. Minimum: • Bachelor's degree in a Electrical Engineering, RF, • Three - Five (3-5) years of working in an RF-product design, System engineering or RF production environment., • Experienced in working in a networked environment using a Windows and/or Windows-like interface including MS Office tools (PowerPoint, Excel, and Word) at an advanced level., • Familiarity with Engineering CAE/CAD tools such as LabView, AutoCAD, Solidworks, Cadence MWO, and Keysight ADS., • This position requires access to technology, materials, software or hardware that is controlled by US export laws. In order to be eligible for this position, you must be a "US Person" under US export laws (or eligible for approval under a U.S. Government export license)., • Five (8) to Eight (10+) years experience., • Masters Degree in a Technical Field., • Active Security Clearance., • Background in Defense Industry., • Familiarity with component selection for high-reliability/aerospace/defense applications., • Excellent technical communication, documentation, and organizational skills., • Ability to lift 25–50 lbs. of test equipment with assistance., • Fast-paced environment with frequent interaction with supervisors., • Work in a collaborative environment with growth opportunities., • Be part of a supportive team focused on quality and efficiency., • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off This position is an excellent opportunity for motivated individuals who are ready to take the next step in their careers in manufacturing and production. Applicants must be U.S. citizens. Q Microwave is an Equal Opportunity Employer. Ready to take the next step in your career? Apply today!

Job Description Who we are: Fuse builds innovative communications, networking, and computing solutions that improve the sharing of information, video, text, and voice among operators distributed throughout the airborne, maritime, and ground environments. We are a technology firm creating in-house software, network and hardware solutions that support our noble cause of advancing warfighter capabilities with elegant, user-focused communications, networks, and software systems. About this role: Do you thrive in innovative, design-driven environments with a high level of both accountability and trust? Are you passionate about delivering elegant hardware solutions with the right amount of engineering rigor? Are you seeking a technical role where you can take initiative? If so - we want to hear from you! Fuse is looking for a mid-level Mechanical Engineer to join our team onsite in San Diego, CA. We’re looking for a mechanical engineer that can balance discipline and attention to detail with outside-the-box thinking and an innovative problem-solving attitude. Must be a pragmatic and mission-driven self-starter. Apply your analytical and detail-oriented mindset to develop, own, and improve Fuse’s products for U.S. defense agencies that improve the sharing of information among warfighters distributed throughout airborne, maritime, and ground environments. Through a collaborative effort with the Electrical, Systems, and Production teams, this role will support Fuse Engineering to build communications, networking, and computing solutions for the warfighter. This is a mid-level role with great potential for growth. Warfighter-focused design and development is at the heart of Fuse processes. Throughout Fuse development our experienced team applies the best practices of commercial design-thinking, coupled to the DoD systems engineering framework. The coupling of commercially proven design with rigorous systems engineering gives Fuse an ability to rapidly design, develop and field solutions well inside of typical military design cycles. Fuse rapidly innovates, putting creative concepts into action and refining those concepts through hands-on testing, user evaluation, and iterations. What you'll do: • Implement mechanical systems, equipment, and packages for customers and internal programs that meet requirements and expectations, • Support, design, and develop dynamic tactical communications systems, • Mechanical design and development for sustaining engineering of our flagship and existing products including dynamic tactical communications systems, • Perform trade studies and participate in equipment selection, • Generate, review, and maintain mechanical drawings, bills of materials (BOMs), work instructions, and releasing of mechanical prints, • Interact with vendors to quote and produce mechanical parts and assemblies, • Participate in engineering/design reviews, • Conduct feasibility studies and testing on new and modified designs, • Support prototype and first article hardware builds, • Support integration between hardware, software, and network systems, • Conduct and support test planning, execution, and post-event reporting, • Interpret and research system interface documents in support of designing/defining/documenting how systems will interconnect, • Translate customer requirements into subsystem and system specifications, • Provide on-site and distance operational support, • Bachelor’s degree in Mechanical/Aerospace Engineering and 4+ years of experience, • Familiarity with Engineering Drawing Practices Y14.100 and Geometric Dimensioning and Tolerancing Y14.5, • Expert level of capability with Solidworks software including experience with eDrawings and Model Based Definition (MBD) of products and assemblies Y14.41, • Experience with fabrication methods for sheet metal and machined parts with part finishing (powder coat, anodize, Alodine, and plating), • Understanding of additive manufacturing processes and fabrication methods for sheet metal and machined parts, • Understanding of cable routing and its application in enclosures, • Must be a nimble self-starter who is excited about technology and can think out of the box and suggest powerful new ideas, • Experience working with production personnel and creating assembly instructions, • Strong technical, interpersonal, written and verbal skills, • Ability to operate effectively in a team environment as well as independently, • Demonstrate ownership and accountability of product designs, • Ability to obtain US SECRET Clearance Nice to have: • Experience with commercial and military documentation, • Experience with presenting technical data to small to medium sized external customer groups (both Technical and programmatic audiences), • Experience in design for TEMPEST, EMI MIL-STD-461, MIL-STD-810 (Environmental), MIL-HDBK-516 (Air Worthiness), ARINC 404, and/or ARINC 600 requirements, • Basic Electrical Engineering knowledge including manufacturing processes for Circuit Card Assemblies and grounding strategies, • Basic understanding of Configuration Management practices with experience with Solidworks PDM, • Experience with Solidworks Simulation analysis (or similar software) to include Structural Static/Fatigue, Thermal (Conduction and Convection) and Computational Flow/Fluid Dynamics (CFD), • Experience in designing routing cable assemblies using software-based tools such as Solidworks Electrical 3D and Schematics., • Experience in system design, testing, and analysis, • Experience in agile, professional software development environments utilizing revision control, test driven development and continuous integration Founded in 2010, Fuse is a veteran-owned, rapidly growing small business. Our San Diego-based company has earned recognition as an emerging leader in airborne, maritime, and ground networking. Placing the warfighter at the center of every design process, Fuse delivers intuitive, agile, and resilient products that go beyond national security requirements—providing lasting utility and game-changing results. We take pride in our brilliant and talented team as well as our dynamic environment and collaborative, creative, environment. We build cutting-edge hardware and software products that solve complex national security challenges for our warfighters at the tactical edge. Benefits • Medical, Dental, and Vision, • Employee coverage is fully funded; a portion of dependents' coverage is funded as well, • 11 paid Federal Holidays, • Paid Time Off (PTO), • Date of hire through second year: 10 days/year (accrued), • After two years: unlimited, • 40 hours of paid sick leave per year, • 401k with employer matching, • Annual bonuses, • Cell phone reimbursement: $100/month

Job Description Natilus is seeking a Manufacturing Engineer to join the manufacturing team in San Diego, CA. Your primary task would be creating manufacturing plans and studies for prototype and production aircraft. At Natilus, we work with a small team of highly adaptable engineers which enables us to accomplish the tasks of a much larger team. This gives you the opportunity to branch out into other technical disciplines such as mechanisms, manufacturing, stress analysis and tooling design as well as participate in the entire cradle-to-grave design process of multiple aircraft. Natilus is currently building a large 19,000lb unmanned aerial vehicle powered by twin turbo props. Our aircraft is a blended wing body with the sole purpose of carrying cargo. Making history utilizing multiple new technologies, it will be the first of its kind to fly and be put into production. The position is based out of San Diego and requires 20% travel. US Citzens or Permanent Residents may apply. Requirements • Experience creating manufacturing plans through blue prints and communication with the engineering team, • Capable of manipulating engineering models and designs to determine assembly sequences and trapped parts, • Support engineering team through review of design details and suggesting changes toward ease or economy of manufacturing, • Determines method and sequence of fabrication, assembly and final setup of assembly components, • Organize and assist build team and techs with day to day tasks and deliverables aligned with engineering schedule, • Proficiency in NX, CATIA, Unigraphics, or Solidworks, • A minimum of five years manufacturing or directly related work experience, • Hands on experience with composite and metallic parts and assemblies, • Experience with design as build manufacturing and using metrology for determinate assembly, • Comfortable setting up and operating power machine tools and accessories for machining of tools and dies, • Aircraft homebuilding or other hands-on design or build experience, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays)

Job Description Xometry (NASDAQ: XMTR) powers the industries of today and tomorrow by connecting the people with big ideas to the manufacturers who can bring them to life. Xometry's digital marketplace gives manufacturers the critical resources they need to grow their business while also making it easy for buyers at Fortune 1000 companies to tap into global manufacturing capacity. Xometry is seeking highly motivated Mechanical Engineers to act as customer-facing Technical Account Managers (TAMs). These TAMs will be embedded within our most strategic accounts, acting as an extension of their engineering teams. This role is a unique blend of customer engagement, technical expertise, and operational execution. TAMs will report into Operations but will work very closely with Sales to drive growth and ensure customer satisfaction. This is a unique opportunity to join a dynamic and growing company at the forefront of digital manufacturing. If you are a highly motivated Mechanical Engineer with a passion for customer success and a desire to make a real impact this is the role for you. Responsibilities: Customer Integration: • Become a trusted advisor and technical expert for assigned enterprise accounts, • Weekly onsite visits at customer and partner locations, building relationships and understanding their needs, • Collaborate closely with customer engineers on Design for Manufacturing (DFM) to optimize projects for Xometry's platform, • Proactively identify and address potential manufacturing challenges, • As customer projects are awarded to Xometry, ensure orders are directed to the most qualified manufacturers within our network, • Conduct monthly on-site audits of manufacturing partners to ensure they meet Xometry's quality standards and customer specifications, • Manage projects to successful completion, overseeing production, and ensuring on-time delivery, • Handle critical communications, order changes, and escalations related to customer orders, • Partner with Enterprise Sales Executives to drive account growth and retention, • Identify opportunities for expanding Xometry's services within existing accounts, • Provide technical expertise and support during the sales process, • Bachelor's degree in Mechanical Engineering or a closely related field such Aerospace Engineering, Product Design/Development, or Industrial Engineering is required, • 7+ years of experience in manufacturing, product development, and project management, • Experience in the aerospace industry is highly preferred, • Strong understanding of manufacturing processes and DFM principles, particularly as they apply to CNC applications, • Experience in CNC Machining, Tube Bending, Composites, or 3D printing is preferred, • Proficiency in modelling and drafting software such as Solidworks, • Excellent communication, interpersonal, and problem-solving skills, • Experience with CRM systems such as Salesforce, • Proficiency in Google Suite and Microsoft Office Suite, • Ability to travel to customer and partner sites up to 50%, travel could be short notice and range from short day trips to multi-day drips #LI-Remote Xometry is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. For US based roles: Xometry participates in E-Verify and after a job offer is accepted, will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job Description We are looking for a mid-level Mechanical Engineer to join our team onsite in San Diego, CA. Were looking for a mechanical engineer that can balance discipline and attention to detail with outside-the-box thinking and an innovative problem-solving attitude. Must be a pragmatic and mission-driven self-starter. What you'll do: • Implement mechanical systems, equipment, and packages for customers and internal programs that meet requirements and expectations, • Support, design, and develop dynamic tactical communications systems, • Mechanical design and development for sustaining engineering of our flagship and existing products including dynamic tactical communications systems, • Perform trade studies and participate in equipment selection, • Generate, review, and maintain mechanical drawings, bills of materials (BOMs), work instructions, and releasing of mechanical prints, • Interact with vendors to quote and produce mechanical parts and assemblies, • Participate in engineering/design reviews, • Conduct feasibility studies and testing on new and modified designs, • Support prototype and first article hardware builds, • Support integration between hardware, software, and network systems, • Conduct and support test planning, execution, and post-event reporting, • Interpret and research system interface documents in support of designing/defining/documenting how systems will interconnect, • Translate customer requirements into subsystem and system specifications, • Provide on-site and distance operational support, • Bachelors degree in Mechanical/Aerospace Engineering and 4+ years of experience, • Familiarity with Engineering Drawing Practices Y14.100 and Geometric Dimensioning and Tolerancing Y14.5, • Expert level of capability with Solidworks software including experience with eDrawings and Model Based Definition (MBD) of products and assemblies Y14.41, • Experience with fabrication methods for sheet metal and machined parts with part finishing (powder coat, anodize, Alodine, and plating), • Understanding of additive manufacturing processes and fabrication methods for sheet metal and machined parts, • Understanding of cable routing and its application in enclosures, • Must be a nimble self-starter who is excited about technology and can think out of the box and suggest powerful new ideas, • Experience working with production personnel and creating assembly instructions, • Strong technical, interpersonal, written and verbal skills, • Ability to operate effectively in a team environment as well as independently, • Demonstrate ownership and accountability of product designs, • Ability to obtain US SECRET Clearance, • US Citizen Nice to have: • Experience with commercial and military documentation, • Experience with presenting technical data to small to medium sized external customer groups (both Technical and programmatic audiences), • Experience in design for TEMPEST, EMI MIL-STD-461, MIL-STD-810 (Environmental), MIL-HDBK-516 (Air Worthiness), ARINC 404, and/or ARINC 600 requirements, • Basic Electrical Engineering knowledge including manufacturing processes for Circuit Card Assemblies and grounding strategies, • Basic understanding of Configuration Management practices with experience with Solidworks PDM, • Experience with Solidworks Simulation analysis (or similar software) to include Structural Static/Fatigue, Thermal (Conduction and Convection) and Computational Flow/Fluid Dynamics (CFD), • Experience in designing routing cable assembliesusing software-based tools such as Solidworks Electrical 3D and Schematics., • Experience in system design, testing, and analysis, • Experience in agile, professional software development environments utilizing revision control, test driven development and continuous integration, • Active Secret Clearance

Job Description GROW WITH US AND STAY EXTRAORDINARY: Launch your career to new heights with Innoflight—one of San Diego’s fastest-growing Aerospace and Defense innovators. Here, visionary minds engineer the future of space technology through pioneering, compact, and cyber-secure solutions. From software-defined radios to cutting-edge cryptographic systems and avionics, everything we build powers the next era of New Space. Join our small, agile, and mission-driven team where your work has real impact and your growth has no limits. We’re not just reaching for the stars—we’re engineering them. Let’s innovate the infinite, together. A DAY IN THE LIFE: As a Mechanical Engineer I, you’ll support the design, development, and implementation of mechanical components and systems for spacecraft-related products. Working under the guidance of senior engineers, you’ll gain experience in CAD design, prototype builds, product testing, and documentation—while collaborating with cross-functional teams to ensure successful project execution. This entry-level role is the perfect opportunity to apply mechanical engineering principles to real-world aerospace projects and grow your technical expertise. WHAT YOU'LL DO: • Design & Development: Assist in the design and development of mechanical components and assemblies using CAD tools., • Prototyping & Testing: Support prototype builds, engineering testing, and early-stage design iterations., • Documentation: Create and maintain technical drawings, plans, and specifications with supervision., • Product Improvements: Participate in testing and experimentation to support design refinements., • Technical Writing: Write and maintain basic technical documentation for manufacturing and assembly., • Project Support: Assist in estimating project timelines and budgets with guidance., • Compliance: Ensure that designs meet basic compliance regulations., • Collaboration: Work with cross-functional teams, including electrical and software engineers., • Mechanical Engineering Principles: Applying academic knowledge to design, testing, and documentation., • Technical Problem-Solving: Analyzing design challenges and supporting practical solutions., • CAD & Tools: Using software such as SolidWorks or AutoCAD to create and refine designs., • Teamwork & Communication: Collaborating effectively across disciplines and communicating technical concepts clearly., • Bachelor’s Degree in Mechanical Engineering or a related field required., • 1 or more years of mechanical engineering experience, including internships and/or project-based work preferably in the aerospace industry., • Experience with CAD software such as SolidWorks or AutoCAD., • Knowledge of mathematical computing and analysis tools (e.g., MATLAB, Excel, LabView)., • Strong technical and problem-solving skills with the ability to analyze design challenges., • Effective communication skills, both verbal and written., • Ability to work collaboratively in a team environment and take direction from senior engineers., • Proficiency in Microsoft Office tools (Word, Excel, PowerPoint)., • 401(k) with 3% company match (automatic enrollment), • Comprehensive medical, dental, vision, HSA & life insurance, • 10 paid holidays + 120 hours PTO (starting in year one), • Flexible Work-Life Balance: Enjoy a 9/80 work schedule with every other Friday off—whether you use it to recharge, work on a passion project, or spend time with family, the choice is yours., • Continuous Learning & Development: We’re serious about professional development. From tuition reimbursement to internal "Ask Me Anything" sessions and weekly “Lunch & Learns,” we make learning a core part of the job. YOU SHOULD KNOW: Potential new employees must successfully complete a background check which includes criminal search, education certification and employment verification prior to hire. Applicants must be authorized to work for any employer in the U.S as you must have the ability to obtain a security clearance. We are unable to sponsor or take over sponsorship of an employment Visa. REFERRALS: We love a good referral! If you know someone that would be a great fit for this position, please share! A NOTE TO STAFFING AGENCIES: Innoflight does not accept unsolicited resumes from agencies, recruiters, or any third-party sources. Any such submissions will be considered property of Innoflight, and no fees will be paid in the event a candidate is hired from an unsolicited referral. To California residents applying for this job, please read Innoflight’s CCPA Notice: . #LI-Onsite Powered by JazzHR qsCAB6eCao

Job Description Job Summary We have an exciting opportunity for a Senior Electrical Engineer (EE) to join our clients Electrical Technologies team located in San Diego, CA. We are looking for someone with drive, talent, and experience leading the development of Electrical System Command and Data Handling architectures and Mixed-Signal/High-Speed Digital circuit designs who also thrives in a fast-paced, product development environment. The successful candidate will report to Electrical Technologies Sr. Manager of High-Speed Digital and, alongside high-caliber staff, will be engaged in the engineering support and new development of satellites and space systems, high-energy laser systems, advanced aerospace and electro-optic sensors, space-based optical communications, nuclear thermal propulsion, cutting-edge technology ventures into Defense and “NewSpace,” and a variety of disruptive technologies in the expanding product portfolio. DUTIES AND RESPONSIBILITIES: • Work with Engineering staff and chief engineers in the concept development and prototype design, integration, and test of high-power processing and controls solutions for all product lines and technology areas. These encompass high-power motor drives, power conditioning systems, high-energy laser systems, battery systems, advanced aerospace and electro-optic sensors, space-based optical communications, small satellites and space systems, nuclear thermal propulsion, optical beam pointing and control, and signal/image processing., • With consultative direction, exercise considerable latitude in determining technical objectives for the review, research, design, development, and/or solutions for designated engineering systems, projects, and programs., • Demonstrate prior experience in the improvement of legacy systems and development of new systems., • Generate electrical architecture solutions for new project needs, perform electrical engineering analyses for systems and circuits, document findings, communicate results to engineering and program management staff, give technical presentations, and manage technical effort schedules., • Function in a leadership role for a project/program and provide planning, direction and oversight to less experienced professional staff or team of professional staff in technical efforts., • Formulate plans, typically multi-year, and coordinate solutions development and deployment including documentation, reporting, publishing, and making technical and other presentations to ensure viability of the solutions in an evolving environment., • Evaluate the integration of the engineering solutions within the overall engineering environment and ensure that appropriate documentation, testing, maintenance, and engineering updates are completed., • Plan for future applications of solutions based on new developments in engineering technology., • Develops new and expands existing business opportunities., • Communicate with colleagues and management throughout solution development and deployment cycles. Job Qualifications: • Typically requires a bachelor's degree, master's degree, or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; twelve or more years of experience with a bachelor's degree, ten or more years of experience with a master's degree, or seven or more years with a PhD. May substitute equivalent engineering experience in lieu of education., • Active DoD Security Clearance is required., • Required Experience: Electrical system command and data-handling architecture and technical team leadership; high-speed digital circuit design; embedded processing and controls; analysis, design, and implementation of hardware systems to include digital, analog, and RF is required; guiding a design through development and into production; familiarity with DoD technical review process (at a minimum: SRR, PDR, CDR, TRR)., • Desired Experience: High-reliability aerospace electronics and electrical systems; unmanned space-systems and satellites, including micro-satellites, cube-satellites, or small-satellites (>500 kg)., • Desired Skills (ranked high to low): Experience with Altium PCB Design Software, PADS PCB Design Software, SPICE circuit simulation tools, HyperLynx Signal/Power Integrity tools, ANSYS Signal Integrity tools, Atlassian Tools, Microsoft Project., • Demonstrate technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership., • Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving project environment., • Strong communication, presentation, and interpersonal skills to effectively interface with other departments, customers, government representatives, and/or professionals., • Capable of representing the organization as a prime technical contact., • Customer-focused and able to formulate plans based on the development of innovative new designs in resolving advanced technical engineering problems., • Must be able to work on a self-initiated basis or in a team environment., • Must be able to prepare and conduct detailed technical presentations and reviews for all levels of management, professional and support staff, customers, potential customers, and government representatives., • Some travel and extended work schedules may be required., • The submission of a cover letter with resume is desired.

Job Description GROW WITH US AND STAY EXTRAORDINARY: Launch your career to new heights with Innoflight—one of San Diego’s fastest-growing Aerospace and Defense innovators. Here, visionary minds engineer the future of space technology through pioneering, compact, and cyber-secure solutions. From software-defined radios to cutting-edge cryptographic systems and avionics, everything we build powers the next era of New Space. Join our small, agile, and mission-driven team where your work has real impact and your growth has no limits. We’re not just reaching for the stars—we’re engineering them. Let’s innovate the infinite, together. A DAY IN THE LIFE: As a Quality Engineer III, you will lead quality initiatives and resolve complex quality issues across hardware and software deliverables. You’ll work closely with internal and external stakeholders to improve quality processes and ensure compliance with both company policies and industry standards. Your contributions will directly support organizational certifications, customer satisfaction, and a culture of continuous improvement. WHAT YOU'LL DO: • Supports Quality Initiatives: Collaborates with Quality, Engineering, and Operations programs to achieve objectives and enhance existing processes., • Identifies Process Improvements: Works independently to optimize internal and external processes, continuously seeking value-added improvements., • Reviews Documentation: Evaluates End Item Data Packages (EIDPs) from internal product assembly, testing, and Contract Manufacturers to ensure compliance., • Manages Inspections and Reports: Creates First Article Inspection Reports (FAIRs) for customer deliveries and manages Corrective Action Reports (CARs) for internal and external issues, driving them to closure., • Enhances Quality Control Plans: Contributes to the development of quality control plans, work instructions, and training systems., • Supports Certifications: Aids in sustaining existing certifications and obtaining additional ones, ensuring compliance with standards and contractual requirements., • Analyzes Workflow Issues: Identifies workflow and production issues, recommends changes, and drives improvements to enhance overall quality., • Provides Customer Support: Offers direct support failures and assists with Return Material Authorization (RMA) workflow activities., • Organizes Reporting: Compiles and prepares reports and metrics for management presentations, showcasing quality performance and compliance., • Collaborates with Management: Works closely with all levels of management to ensure that internal processes yield compliant results with external standards., • Hands-On Quality Engineering: 5+ years of experience across Manufacturing, Quality Assurance, Engineering, Operations, and Supplier/Product Quality., • Quality Assurance: Driving quality resolutions and implementing processes to enhance product quality., • Process Optimization: Identifying and optimizing both internal and external processes to improve efficiency., • Documentation Review: Accurately reviewing and analyzing documentation to ensure compliance and traceability., • Customer Engagement: Effectively supporting customers in resolving issues., • Bachelor’s Degree in Engineering or equivalent required; Electrical Engineering preferred., • 5 or more years of cross-functional experience in Manufacturing, Quality Assurance, Engineering, and Operations., • Familiarity with quality control methodologies, documentation standards, and inspection processes., • Previous experience in the aerospace industry is preferred., • Strong communication, negotiation, and problem-solving skills, along with a positive, proactive attitude., • 401(k) with 3% company match (automatic enrollment), • Comprehensive medical, dental, vision, HSA & life insurance, • 10 paid holidays + 120 hours PTO (starting in year one), • Flexible Work-Life Balance: Enjoy a 9/80 work schedule with every other Friday off—whether you use it to recharge, work on a passion project, or spend time with family, the choice is yours., • Continuous Learning & Development: We’re serious about professional development. From tuition reimbursement to internal "Ask Me Anything" sessions and weekly “Lunch & Learns,” we make learning a core part of the job. YOU SHOULD KNOW: Potential new employees must successfully complete a background check which includes criminal search, education certification and employment verification prior to hire. Applicants must be authorized to work for any employer in the U.S as you must have the ability to obtain a security clearance. We are unable to sponsor or take over sponsorship of an employment Visa. REFERRALS: We love a good referral! If you know someone that would be a great fit for this position, please share! A NOTE TO STAFFING AGENCIES: Innoflight does not accept unsolicited resumes from agencies, recruiters, or any third-party sources. Any such submissions will be considered property of Innoflight, and no fees will be paid in the event a candidate is hired from an unsolicited referral. To California residents applying for this job, please read Innoflight’s CCPA Notice: . #LI-Onsite Powered by JazzHR pruUbPLdWq

Job DescriptionDescription: About AEMI AEMI, an AEM company, is a leading manufacturer of high-reliability electronic components specializing in circuit protection, power conditioning, and radio frequency (RF) components. With a solid global presence, AEMI serves mission-critical industries such as aerospace and defense and the industrial and automotive sectors. Our commitment to innovation and quality has positioned us as a preferred supplier for highly engineered solutions in harsh environments. Position Summary AEMI is looking to add a Plating Operator / Technician to join the High Reliability Ferrite Chip Bead (HRB) product line. The Plating Operator / Technician will be responsible for performing electroplating of nickel, tin/lead, and gold on to passive electronic components utilizing a barrel plating operation. The Plating Operator / Technician will be responsible for adhering to all procedures, documentation, quality management standards, and environmental, health, and safety requirements. The Plating Operator / Technician is a key contributor to process control standards and will work extremely closely with other plating operators / technicians, the Senior Plating Engineer, and the HRB Product Manager to ensure the high level of quality and reliability is maintained. Essential Duties & Responsibilities: • Set-up and operate all equipment related to the electroplating process according to the process instructions and specifications, • Monitor the electroplating process and key process indicators, adjust parameters to ensure quality standards are adhered to while meeting production throughput goals, • Perform visual inspection and measurements to identify process defects that may impact quality, • Communicate process observations with key members of the production team, • Maintain proper chemical balances and perform regular maintenance on plating baths, • Document production processes and maintain accurate records of work performed, • Collaborate with team members and assist with troubleshooting process issues The physical demands described here are representative of those that must be met by an employee to successfully perform the essential duties and responsibilities of this job. As a routine part of work, employees will generally be required to use their hands to manipulate, handle, or feel objects, tools (including small tools) or controls; reach with hands and arms; lift up to 50 pounds; climb stairs; sit and stand for long periods of time; and talk and hear. Specific vision abilities include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Benefits of working with our team: • This role is full-time, non-exempt, • Based in San Diego, CA, this is an onsite role, • We offer competitive pay based on knowledge, skills, and relevant experience AEM, headquartered in San Diego, California, (change based on company & location) is a portfolio company of Industrial Growth Partners (IGP), a private equity firm focused exclusively on middle-market industrial manufacturing and niche services businesses. Through its industry leading brands AEM, Renaissance Electronics, and Central Semiconductor, AEM serves niche applications across a diverse array of attractive markets including satellite, aerospace, defense, industrial, medical, EV/Battery, and telecom. AEM is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, gender, gender identity, sexual orientation, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Requirements: Minimum Qualifications: • High school diploma or equivalent, • Prior manufacturing work experience required with aerospace or medical industry preferred, • Prior experience in electroplating or metal finishing is preferred, • Ability to work with chemicals while meeting all safety and environmental protocols, • Attention to details and organization are required along with strong problem-solving skills, • Ability to work independently with minimal supervision while adhering to all pre-established guidelines for product safety, awareness, and quality management, • Excellent communication skills and the ability to follow detailed instructions, • US Citizen or Permanent resident (Green Card Holder)

Job DescriptionElevate Your Career as a CNC Electronic Systems Technician Level 2 About Senior Operations SoCal Welcome to a company that thrives on technology and innovation. At Senior Operations SoCal, our commitment to excellence is driven by our values: Safety, Integrity, Customer Focus, Respect & Trust, Accountability, and Excellence. We pride ourselves on fostering a team-oriented atmosphere where collaboration and customer-centric solutions are at the forefront of what we do. Your Role and Responsibilities As a CNC Electronic Systems Technician Level 2, your expertise will be pivotal in ensuring that our CNC machinery continues to operate at peak efficiency. You'll engage in tasks such as diagnosing issues, performing preventative maintenance, and conducting thorough repairs and upgrades on electronic and mechanical components. • Carefully inspect and assess CNC systems to diagnose and remedy faults., • Implement routine and preventative maintenance measures to avert operational disruptions., • Strong proficiency in reading and interpreting technical documents and schematics., • A keen eye for detail coupled with a solid mechanical aptitude. By joining Senior Aerospace Ketema, you're not just taking on a job—you're embarking on a journey of growth and development. Our competitive compensation package, including a robust salary and benefits, underscores our commitment to employee well-being and advancement. Compliance and Legal Requirements Before you dive into our workforce, please be advised of the following prerequisites related to employment. If offer of employment is made it will be contingent upon passing all the following: Drug Test, Background Check, ITAR and U.S. Export Compliance Screening. Equal Opportunity Employer: minority/female/disability/veteran Access to our facilities is restricted under the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR) to U.S. Persons (U.S. Citizens, lawful permanent residents, U.S. Nationals, U.S. refugees, asylees, or temporary residents under amnesty provisions), and to properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes. Additionally, potential employee names will be screened against the Consolidated Screening List (maintained by the United States government) to determine eligibility to receive controlled technical data.

Job Description We’re looking for an experienced CNC Programmer to join our team, specializing in the programming and development of high-precision aerospace components using lathe and mill machines. In this role, you’ll create and optimize programs, post G-code, and oversee machining operations—from first article through full production. You'll be responsible for writing detailed manufacturing plans, developing tooling and fixtures, and collaborating with manufacturing engineers to implement efficient, high-quality machining processes. To succeed, you’ll need to be self-driven, detail-oriented, and passionate about solving complex machining challenges in a fast-paced aerospace environment. Key Responsibilities: • Program and operate multi-axis machines (2-axis, 3-axis, 5-axis, mill/turn), • Create and optimize CNC programs using Mastercam or similar CAM software, • Post and manually edit G-code to improve efficiency and accuracy, • Design and develop custom tooling and fixturing solutions, • Create clear and accurate setup documentation, • Incorporate machine simulations and manage machine definitions, • Collaborate with engineering and production teams to transition parts from first article to production, • 10+ years of CNC machining experience, • 3+ years of CNC programming experience, • Strong understanding of GD&T and tolerance stack-up, • Experience with high-precision, multi-axis machines, • Proven ability to optimize and manually edit G-code, • Experience machining Inconel or similar nickel alloys, • Excellent communication skills and ability to follow detailed work instructions, • Degree in engineering or a related technical field

Job Description Job Overview We are seeking an experienced Senior Aerospace Electrical Engineer with extensive expertise in Unmanned Aerial Vehicles (UAVs) to lead and innovate within our engineering team. The ideal candidate will have a strong background in guidance systems, servo control, rugged design, design assurance, verification testing, and quality control, coupled with proven leadership and mentoring skills. This role demands hands-on technical proficiency and the ability to guide multidisciplinary teams in delivering high-performance electrical systems for aerospace applications. Key Responsibilities • System Design and Innovation: Lead the design and development of advanced electrical systems for UAVs, including guidance systems, servo control mechanisms, and power management solutions, ensuring alignment with mission-critical requirements., • Rugged Design: Oversee the development of durable electrical components and systems engineered to withstand harsh environmental conditions, including extreme temperatures, vibrations, and electromagnetic interference., • Guidance Systems: Direct the integration of sophisticated guidance and navigation systems, incorporating sensors, GPS, and inertial navigation units, to achieve precise and reliable UAV performance., • Servo Control: Spearhead the design and optimization of servo control systems for precise actuation and stabilization of UAV components, such as control surfaces, gimbals, and payloads., • Design Assurance: Establish and enforce design assurance processes to ensure compliance with aerospace standards (e.g., DO-160, DO-254, MIL-STD), driving reliability and safety in all designs., • Verification Testing: Develop and lead comprehensive verification and validation testing strategies, overseeing test execution to confirm system performance, durability, and compliance under simulated and operational conditions., • Quality Leadership: Collaborate with quality assurance teams to define and uphold rigorous quality standards, leading root cause analysis and implementing corrective actions to maintain product excellence., • Hands-On Expertise: Actively participate in prototyping, troubleshooting, and system integration, leveraging hands-on skills to resolve complex technical challenges and validate designs., • Team Leadership and Mentorship: Mentor and guide junior engineers, fostering technical growth and collaboration while leading cross-functional teams to achieve project milestones and objectives., • Education: Bachelor’s degree in Electrical Engineering, Aerospace Engineering, or a related field; Master’s degree strongly preferred., • Experience:, • Minimum of 8 years of experience in aerospace electrical engineering, with at least 5 years focused on UAV systems., • Demonstrated expertise in guidance systems, servo control, ruggedized design, and verification testing., • Proven leadership experience, including managing teams and mentoring engineers., • Technical Skills:, • Advanced proficiency in CAD tools (e.g., Altium Designer, Cadence) for circuit design and PCB layout., • Expertise in embedded systems, microcontrollers, and real-time operating systems., • In-depth knowledge of aerospace standards (e.g., DO-178C, DO-254, MIL-STD-810)., • Proficiency with test equipment, including oscilloscopes, signal analyzers, and environmental test chambers., • Leadership Skills:, • Strong ability to lead and inspire technical teams, manage projects, and drive innovation., • Excellent communication skills to collaborate with stakeholders and present complex technical information clearly., • Proven mentoring skills to develop junior engineers and foster a culture of excellence., • Soft Skills:, • Exceptional problem-solving and analytical skills with a focus on quality and precision., • Extensive experience with UAV flight control systems, autopilot integration, and sensor fusion., • Familiarity with FAA and international certification processes for UAVs., • Background in designing fault-tolerant and redundant systems for high-reliability aerospace applications.

Job Description Job Description: • Client, Aerostructures Aftermarket Department is looking to bring on a Customer Account Executive who manages global airline nacelle support needs, responds to customer inquiries, document procedures, collect data, and provides information to customers to resolve concerns., • Work directly with Airlines, Airline Maintenance and Repair Overhaul (MRO) facilities, & Brokers, providing support for their aftermarket spares' orders, • Provide customer support for navigation and utilization of our global Spares and Technical Service customer portal, • Communicate with customers by telephone or electronically to provide information about organization products or services, manage customer accounts, and address customer concerns., • Liaison with both Engineering & UTAS MROs to meet customer needs, • Actively manage and negotiate fluctuating credit situations and timely invoice payments, • Process customer orders and quotes in accordance with Standard Work procedures, and when required, redirect queries to appropriate department or personnel., • Provide references to customers on publications materials and secondary sources of information, • Act as an active participant in a Continuous Improvement team, for the betterment of the organization's processes and quality to both internal and external customers, • Manage and maintain a record of customer interactions or transactions in the ERP System, • Coordinate with provisioning, shipping, and inventory warehouse to expedite or trace shipments., • Understand and be able to effectively communicate engineering changes to both customer Purchasing departments and Engineers, • Promote products/services to ensure business targets are met., • Provide after-sales support for client contracts to ensure customers satisfaction., • Perform duties related to overall customer service and account management., • Provide support to sales team with regard to customer concerns and visits., • Coordinate with sales reps to identify inside sales opportunities., • Maintain knowledge of UTC organization and products to provide the appropriate information and support to customers., • Consistently document customer service needs to identify patterns and maintain quality., • Ability to communicate professionally and effectively, both in writing and verbally in the English language., • Bachelor's degree and 3 years of relevant experienceCompany DescriptionZobility (RGBSI), is dedicated to providing the highest quality of services to our clients and employees. We are proud to be the primary partner to top companies in the automotive, aerospace & defense, IT, media & entertainment, sports, energy, and finance industries. As a result of our clients' continued growth, we are looking for energetic, personable professionals to partner with these leading US companiesZobility (RGBSI), is dedicated to providing the highest quality of services to our clients and employees. We are proud to be the primary partner to top companies in the automotive, aerospace & defense, IT, media & entertainment, sports, energy, and finance industries. As a result of our clients' continued growth, we are looking for energetic, personable professionals to partner with these leading US companies

Collins Aerospace has an opening for a Senior Manager Procurement in Chula Vista CA.

You will work under the guidance of senior mechanics or subject-matter experts gaining hands-on training and technical experience in aerospace manufacturing.

Job Description Vice President, Growth & Strategy About Company Founded in 2015, Global Air Logistics and Training, Inc. (GALT Aerospace) a rapid innovator, solving the world's critical security challenges to enable warriors to win...decisively. GALT Aerospace subscribes to Col John Boyd's tenet "Wars are won by people, ideas and equipment, IN THAT ORDER." Warfighters need tools (equipment) that are flexible. GALT Aerospace will always satisfy the warfighter with such tools. GALT Aerospace provides simple, effective information capabilities to support all levels of war and drive information to the lowest levels possible, enabling faster decision cycles and decisive results. GALT Aerospace uniquely focuses on architecture solutions, effective open systems integration, and rapid prototyping, fielding, and operations. At GALT Aerospace, employees have incredible opportunities to work on revolutionary and nationally relevant systems. GALT Aerospace looks for people who align with its Core Values: • The Right Thing:, • We work on important things that we are passionate about and will make a difference for the US National Security., • We are ethical and forthright and expect the same from our employees., • We operate with integrity in all things; we do the RIGHT THING., • Trust and Respect:, • We always strive to earn and foster trust., • We Act and communicate with respect., • We foster mutually beneficial relationships., • Add Value:, • We take ownership of our tasks and deliver results to our customers, partners and each other., • We champion individual expertise, creativity, and accomplishments., • We recognize that collaborative teams achieve even greater results. Job Location San Diego, CA, Onsite. Domestic travel is required possibly 50% of the time. Job Description GALT Aerospace is seeking a full-time, salaried Vice President of Growth and Strategy, which will be a key addition to the GALT leadership team. This position requires previous relevant experience within Department of Defense (DoD) communities and the Defense Industrial Base. Expertise in Military Aviation, Communications, Datalinks, and Command and Control is also essential. This role will primarily focus on Enterprise Growth Strategy and the generation and capture of opportunities that meet GALT's strategic plan, whilst addressing critical customer needs, growing the business, and building on the history and success of GALT Aerospace. The successful candidate will be expected to be directly involved in all phases of Business Development and Customer Relationship Management, up to and including proposal writing and the following responsibilities: • Win New Business: Lead pursuits across the DoD, International allies, and other governmental agencies, • Strategic Planning: Develop and oversee implementation of multi-year strategic plans aligned with defense objectives, • Leadership: Lead GALT Growth Department, including Joint Service capture consultants, to mature the opportunity pipelines and expand product and services vertically, • Technical Understanding: Coordinate and collaborate with COO and Engineering Leads to ensure feasibility and reasonableness of GALT pursuits, • Innovation and Modernization: Identify and integrate cutting-edge technology, such as AI, to improve proposal and capture, ensuring GALT stays at the forefront of edge processing, gateways, and communications and sensor networking, • Policy Development: Maintain, expand, and refine GALT Growth Policies and Processes, • Performance Metrics: Establish KPIs (Key Performance Indicators) and goals to measure strategic, operational and tactical initiative effectiveness Required Skills, Experience, and Education • Bachelor's Degree, • 15+ years' experience in within DoD communities and/or the Defense Industrial Base, • U.S. Citizenship, • Ability to rapidly obtain and maintain DoD personnel security clearance at the Secret Level, • Ability to work and lead in a collaborative, fast-paced, highly entrepreneurial, and creative environment, • Strong oral and written communications skills coupled with strong critical and analytical thinking to bridge complex military CONOPS gaps with Joint Command and Control (C2) solutions, • Ability to take initiative, multi-task and work well under pressure as part of a team or individually as required, • Technically minded leader who can build, adapt, and implement new and innovative approaches to defense C2 market, • Team player with a proactive attitude and the ability to be productive in a dynamic environment, • Experience in Business Development to include opportunity identification, developing business cases, and capture management Preferred Skills, Experience and Education • Master's Degree – preferred in Business or Engineering, • 20+ years' experience within the Aviation, Communication/Datalinks, and military communities coupled with proven Corporate Business Development, • Top Secret/SCI Eligible Clearance, • Ability to leverage personal, extensive DoD connections, including influencers and decision makers, • Success with development and growth of new defense business pipelines, • Knowledge of government contracting, fielding, requirements generation, and budgeting for the purposes of transitioning prototype capabilities to production as well as knowledge in defense acquisitions, • Demonstrated experience communicating/briefing executives, managers, employees, and customers to maintain a sustainable working relationship, • Demonstrated ability to serve in the role of a subject matter expert with presentation experience Physical Requirements • Must be able to sit or stand for 6 hours at a time, • Must be able and willing to travel across the country for up to 50% of work time, • Must be able to lift 50lbs Pay Scale At GALT Aerospace, base pay is one part of the total compensation package and is determined within a range. This provides the opportunity to progress as one grows and develops within a role. The base pay range for this role is between $200,000-$250,000; each specific candidate's base pay will depend on their skills, qualifications, experience, and location. Job Posted by ApplicantPro

Sr. Proposal Writer This is an exciting opportunity to join a fast-growing startup in the aerospace/defense industry as their Sr. Proposal Writer, creating clear, accurate, and persuasive content that drives contract wins and supports customers. You’ll work closely with product, engineering, capture, and proposal teams to develop everything from proposal narratives and white papers to operational manuals and release notes—ensuring every document is precise, compelling, and aligned with mission needs. In this role, you’ll help shape winning proposal strategies, integrate key differentiators, and deliver user-focused technical documentation that meets the highest standards of clarity and quality. You’ll also play a key role in building scalable documentation processes, tools, and templates that raise the bar for written materials across the company. Responsibilities: • Produce, review, and refine user-focused documentation for capture, proposal, and business development efforts; including white papers, technical narratives, proposal responses, and pricing materials., • Collaborate with SMEs and cross-functional teams to create proposal artifacts that are clear, persuasive, compliant, and customer-focused., • Verify content accuracy and alignment with RFx requirements, company standards, capture strategies, and industry best practices., • Partner with internal teams to gather insights, map user workflows, and ensure documentation meets all customer and contractual requirements., • Oversee contract deliverable documentation to ensure submissions are accurate, polished, compliant, and delivered on time., • Work with Capture Managers, Solution Architects, and SMEs to translate technical concepts into compelling, customer-ready proposal content., • Develop and maintain technical resources such as manuals, operational procedures, checklists, templates, troubleshooting guides, and release notes for both internal and external use., • Contribute to style guides, processes, workflows, and toolkits that enhance documentation quality, scalability, and efficiency., • Manage multiple documentation projects simultaneously, adapting quickly to evolving priorities in a fast-paced environment., • Identify documentation gaps or risks, implement proactive solutions to keep deliverables on track., • Foster a culture of documentation excellence by creating training resources, templates, and process improvements that empower contributions across the organization., • Support the selection and deployment of tools for authoring, version control, publishing, and content management to optimize workflows. Requirements and Desired Experience: • Bachelor’s degree in English, Communications, Technical Writing or a similar field., • 5+ years of experience as a technical writer, preferably supporting proposal, capture, or business development documentation efforts within the aerospace/defense or technology sectors., • Proven experience of producing, editing, and managing complex proposals and technical documentation in high-pressure, deadline-driven environments., • Skilled at distilling input from technical experts and cross-functional teams into clear, concise, and persuasive written materials., • Adept at integrating win strategies and customer-focused language into proposal narratives that engage and persuade evaluators., • Experienced in developing and maintaining technical manuals, operational guides, and user-facing documentation., • Strong knowledge of Federal proposal structures and writing styles, including RFP/RFQ analysis, compliance matrices, and narrative development for technical, management, and past performance volumes., • Excellent verbal and written communication skills; able to tailor messaging for various audiences., • Strong project management and organizational skills; able to manage competing priorities independently while collaborating effectively across teams., • Experience supporting contract deliverables; knowledgeable of government solicitation processes., • U.S. Citizenship is required; must be able to obtain a DoD security clearance., • Experience working in a fast-paced, high-growth environment or startup is a plus., • Knowledge of capture management principles and the business development lifecycle preferred., • Familiarity with defense industry standards, DoD regulations, and proposal compliance requirements is preferred., • Experience writing technical user-facing documentation, style guides, and scalable documentation processes is a plus., • Military exposure and experience, particularly with technical documentation writing and formatting standards (e.g., MIL-STD-40051, S1000D) is a plus. Compensation (DOE): $115k - $160k annual base salary

The Human Resources Generalist (Benefits) is responsible for working closely with site managers and the HR team in the administration of a variety of HR programs and activities, including benefits, job descriptions, compensation and retirement plans, and HR policies and procedures. Demonstrated know

Job DescriptionDescription: About AEM AEM, Inc., is a leading manufacturer of high-reliability electronic components specializing in circuit protection, power conditioning, and radio frequency (RF) components. With a solid global presence, AEM serves mission-critical industries such as aerospace and defense and the industrial and automotive sectors. Our commitment to innovation and quality has positioned us as a preferred supplier for highly engineered solutions in harsh environments. Summary The Global Technical Support Specialist II provides advanced, multi-regional technical support, working with internal IT teams to ensure consistent service delivery across the Americas and APAC regions. This role is responsible for troubleshooting complex issues, managing backup systems, and supporting IT infrastructure aligned with company standards. The Specialist will utilize and maintain various IT tools and systems to resolve issues promptly, maintaining high service levels and addressing end-user needs globally. Essential Duties & Responsibilities: • System Troubleshooting: Diagnose and resolve advanced technical issues related to Windows and Linux operating systems, performing command-line troubleshooting as necessary., • Backup Management: Support data backup and recovery operations using Veeam for TrueNAS onsite, including isolated server backups and iBMi tape management., • Configuration and Imaging: Assist with system configuration image management deployment, and inventory control., • Data Security: Collaborate on data loss prevention efforts, utilizing iBMi's record-level security and Sophos, ensuring compliance with data protection policies, and managing Azure conditional access., • IT Asset and Inventory Management: Track and manage IT assets using custom applications on iBMi and spreadsheets, ensuring accurate record-keeping across all global sites., • Discovery Automation: Conduct network discovery and asset inventory using PDQ Inventory and ManageEngine OpUtils to maintain an up-to-date IT asset database., • ITSM and Help Desk Support: Handle global support requests. Document incidents and manage service tickets to ensure timely resolutions., • Remote Access and Virtualization: Utilize Hyper-V for virtualization and manage remote access tools to provide global support., • Project and Software Lifecycle Management: Collaborate with the IT team on project tracking software lifecycle management via Microsoft SourceSafe and GitHub, adhering to version control best practices., • User Training and Documentation: Conduct training on IT tools and provide documentation to improve global user proficiency. Develop and maintain user guides for common issues and system access procedures. Benefits of working with our team: • This role is full-time, non-exempt, • Based in San Diego, CA, this is an onsite role, • 9/80 Work Schedule (Enjoy every other Friday off!), • Occasional overtime may be required, • We offer competitive pay based on knowledge, skills, and relevant experience, • Benefits for eligible employees include medical, dental, life insurance, 401K with company match Organizational Overview AEM, headquartered in San Diego, California, (change based on company & location) is a portfolio company of Industrial Growth Partners (IGP), a private equity firm focused exclusively on middle-market industrial manufacturing and niche services businesses. Through its industry leading brands AEM, Renaissance Electronics, and Central Semiconductor, AEM serves niche applications across a diverse array of attractive markets including satellite, aerospace, defense, industrial, medical, EV/Battery, and telecom. AEM is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, gender, gender identity, sexual orientation, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Requirements: Minimum Qualifications: • Associate's degree in Information Technology, Computer Science, or a related field, or equivalent experience., • Minimum of 3 years in a technical support role with global or multi-regional operations exposure., • Advanced proficiency in troubleshooting Windows and Linux environments., • Familiarity with backup solutions (e.g., Veeam, Datto) and recovery processes., • Strong command-line skills for system diagnostics., • Experience with network discovery tools and remote access software., • Bachelor's degree in IT or a related field., • IT certifications (CompTIA A+, Network+), experience with iBMi systems, and familiarity with PDQ Deploy and Inventory, and data loss prevention technologies., • Advanced skills in asset management, experience with virtualization (Microsoft Hyper-V), and knowledge of data privacy regulations (GDPR, CCPA).

Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability.These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, o

Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability.These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, o

Manages customer quality issues, including RMAs, SCARs, and complaints related to part quality and documentation. Acara Solutions is seeking a Quality Manager to join our international aerospace electronics client in north San Diego CA 92111. Drives process improvements across the organization to im

Relentlessly looks for ways to improve Quality and implement steps to increase safety and quality throughout the organization. Additionally, the Quality Inspector will routinely perform receiving inspection of purchased products and services, first article inspection to qualify production process, a

Delivering mission-critical, electronic solutions that protect lives.Use your creativity and critical thinking to take our products from concept to customer.At CAES by Honeywell, we engineer solutions for the world's most critical missions.We serve customers in the defense and aerospace markets.Seek

Aerospace Engineer Job Duties: Contributes to the design, manufacturing, and testing of aircraft and aerospace products.

Job Description Veridiam is a strategic manufacturing partner with over 60 years of experience serving the aerospace, industrial, medical, and nuclear markets. Our roots were formed in the exacting nuclear and aerospace industries, expanded into Medical where we have supplied critical components to a global customer base. We currently provide elegant solutions across a broad range of customers and diverse markets. At Veridiam we recognize that talent is at the forefront of our organization and define who we are in today's industry. POSITION SUMMARY Perform preparation and operate draw bench to draw metal rods into specified shapes and diameter. May perform a variety of general tasks including but not limited to coating, deburring, loading and moving material or tubes throughout facility. ESSENTIAL DUTIES AND RESPONSIIBILITIES • Prepare metal rod/tube for the cleaning, pointing/swaging and draw bench processes., • Manually position and secure specified die and place metal rod/tube into draw bench., • Manually move levers and buttons to set draw speed and operation., • Inserts pointed end of rod through die and into holding jaws., • Manually place long metal tubes into pointer machine for swaging process., • Manually coat material/tubes with lubricating chemical., • May mix chemicals to create lubrication., • May perform cutting metal material by use of chop/abrasive saw., • Provide assistance in department functions., • May move parts from one operation to another throughout facility or within the department., • Verify conformance of workpieces to specifications., • Observe and monitor machine operation to detect work piece defects or machine malfunction., • May measure work piece dimensions., • Maintain clean and orderly work environment., • Demonstrates ability to appear for work on time, follow directions from a supervisor, interact well with co-workers, understand and follow work rules and procedures, comply with company policies and procedures, goals and objectives, and accepts constructive feedback. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals to perform the essential functions. Education and Experience: • High school diploma or General Education Development (GED)., • Ability to operate equipment and controlling operations and systems., • Ability to follow all safety guidelines and protocols., • Ability understand and follow standard operating and safety procedures., • Basic knowledge of and ability to use basic hand tools and measuring devices., • Read and comprehend verbal and written instructions., • Ability to handle, install and position material., • Ability to use basic mathematical equations, including decimal calculations. Pay Rate: The final salary offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and length of experience within the job, type, and length of experience with the industry, education, geographic location, etc. Veridiam is an Equal Employment Opportunity/Affirmative Action Employer. Veridiam will recruit, hire, train and promote persons into all jobs without regard to age, race, color, religion, ancestry, medical condition, sex, sexual orientation, gender identity, national origin, status as a veteran or status as an individual with a disability or any other characteristic or classification protected by law. Access to our facility (and, therefore, employment) is restricted under the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR) to U.S. Citizens, lawful permanent residents of the United States and properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes. 3rd shift 10 a.m. - 5 a.m.

The Senior Finance Manager will lead financial planning, analysis, and reporting for aerospace and defense programs, ensuring compliance with U. Manage and mentor a team of finance analysts and program controllers, providing guidance on Voyager's financial practices and procedures. Provide training

BS/MS in Computer Science, Electrical Engineering, Mechanical Engineering, Aerospace Engineering, and/or similar degree, or equivalent practical experience. Experience deploying perception software on SWaP-constrained platforms. The role requires strong algorithmic thinking, deep familiarity with ai

Person, or Immigration Status Requirements: This job Warehouse Specialist, 2nd Shift, Warehouse, Specialist, Manufacturing, Aerospace.

Aerospace Engineer Job Duties: Contributes to the design, manufacturing, and testing of aircraft and aerospace products.

We are seeking a highly motivated Sales Manager to drive business development and sales growth for our highly engineered and precision Radio Frequency (RF) connectors within the Aerospace and Defense industries.This individual will be responsible for expanding our market presence, cultivating strong

Lockheed Martin is a global leader in aerospace, defense, and technology solutions, dedicated to pushing the boundaries of innovation and shaping the future of the industry.With a rich legacy of excellence and a commitment to delivering advanced capabilities to our customers, we are proud to be at t

Responds to Fleet emergency calls from customer and assigned Field Service personnel and maintains an inventory of parts and tooling for Field Service operations. BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, l

BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. System Testing: Troubleshooting te