Trabajos apprenticeship en Pueblo, ColoradoCrear alertas

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Job Description and Responsibilities We are seeking Welder to join our Maintenance team at our Pueblo, Colorado location. As a welder, skilled in the craft of welding and fabrication, you will provide necessary support to all areas of the mill in a safe manner. • Read prints, plan work, procedures and techniques, • Obtain and move materials, tools, and equipment, • Operates all equipment needed to complete the job, • Direct others in conditioning and preparation, • Observe lockout procedures, • Perform routine maintenance and assists Maintenance personnel, • Obtain and maintain OSHA 10 and equipment certifications, as required, • Additional tasks as assigned Requirements • Associate Degree in welding or have completed a welding apprenticeship, • Must have a minimum 1 year experience in fabrication and welding, structural experience and certification preferred, • Must have a valid Colorado driver's license, • Competent in manipulating numbers, quantities, shapes and spaces; able to take precise measurements and calculate necessary dimensions, • Must be a self-starter with the ability to work with minimal supervision and manage your time when given multiple tasks, • Must have excellent interpersonal communication skills and the ability to collaborate effectively with all levels of personnel, • Physical ability to climb, walk, balance, stoop, kneel, crouch, crawl, make repetitive motions, hear, etc. and the ability to constantly exert forces up to 50 pounds and frequently exert forces up to 100 pounds to lift, carry, push and pull, • Ability to work in inside, outside, and adverse environmental conditions with elevated noise levels and physical hazards, • Qualified Candidates will be required to demonstrate proficiency through testing The above statement reflects the general details considered necessary to describe the principal functions of the job identified, and shall not be construed as a detailed description of all of the work requirements that may be inherent in the jo • $29.79 per hour, • Shift differential Open & Closing Dates: 8/1/2025 - 3/1/2026 #TAH Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. We are seeking an HVAC Technician to join our Maintenance team located in Pueblo, Colorado. As an HVAC Technician you will install and repair air conditioning and heating units in a safe manner. • Works with Air conditioning units, unit heaters, controls, wire, gas, appropriate hand tools, compressors, motors, contactors, belts, filters, pipefittings, gaskets, tubing, oil, freon and other material needed, mobile equipment, pick-up, all other equipment, and necessary safety equipment, • Observe lockout procedures, • Reads prints, • Instruction in the Apprentice process, • Keep work area and equipment clean and orderly, • Plans work and arranges for equipment, tools, and transportation, • Cleans air and heater units. Assists Maintenance personnel., • Subject to both inside and outside environmental conditions. Exposed to elevated noise levels and vibrations, extreme cold and heat. Physical Hazards - Close proximity to moving parts and electrical currents, working on scaffolding and high places, exposure to high heat, hot surfaces, molten metal, chemicals and oils. Atmospheric conditions may require use of respirator., • Obtain and maintain OSHA 10 and equipment certifications, as required Requirements • Completed or have equivalent of Air Conditioning Repairman Apprenticeship with a minimum of 3 years' experience as an HVAC Journeyman, • Possess Type I, Type II, Type III, Universal Refrigerant Transition and Recovery EPA Certification as required by 40 CFR part 82, subpart F, • Experience with installation and repair of air conditioning and heating units, • Proficient in troubleshooting, testing, repair and maintenance of condensing units, furnace heating units and mobile air units, • Must have a valid Colorado driver's license and a mobile equipment qualification., • Demonstrated knowledge and experience in sheet metal work, gas line and regulator installation, and sizing specifications for new installs, • Strong troubleshooting, repair and installation skills, • Must be a self-starter with the ability to work with minimal supervision and manage your time when given multiple tasks, • Must have excellent interpersonal communication skills and the ability to collaborate effectively with all levels of personnel, • Must be able to climb, balance, stoop, kneel, crouch, crawl, reach, stand, walk, push, pull, lift, carry, finger, grasp, feel, talk to communicate, speak over public address system, hear, and make repetitive motions. Needs to see to read prints, drive and repair. Frequently exerts forces up to 75 pounds to lift, carry, push, and pull., • Qualified Candidates will be required to demonstrate proficiency through testing The above statement reflects the general details considered necessary to describe the principal functions of the job identified, and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. #TAH Compensation: • $35.76 per hour, • Shift differential Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. We are seeking a Melting Supervisor to join our Steelmaking team located in Pueblo, Colorado. The Melting Supervisor is responsible for leading and motivating personnel toward higher levels of safety, environmental cleanliness, quality and production through strict adherence of the Rocky Mountain Steel Mills Business Plan and core values • Directly, responsible for supervising and motivating a team of Electric Furnace and Casting personnel in the production of various sizes and grades of rounds from the Demag Caster., • Communicates and supports a safe and positive working environment for all personnel, • Ensures that all employees are working safely and following all the company policies, procedures and practices, • Assists with the operations and flow of the Melt Shop in all areas, including the Furnace, LRF and VTD, • Delivers appropriate training in the development of competent and a motivated and cross trained workforce, • Provides daily update reports and operational progress to management, • Participates in the development and implementation of safety, quality and cost improvement activities focused on achieving the Business Plan and AIPs Requirements • Bachelor's degree and/or equivalent work experience, • Minimum 5 years' experience in steelmaking; Metallurgy preferred, • Ability to work in a team environment with proven interpersonal skills, • Strong leadership and managerial skills, • Strong problem-solving and proven decision making skills, • Proven written and verbal communication skills, • Good organizational and time management skills, • Ability to multitask, • Highly motivated and a self-starter, • Ability to interact with all levels of our organization, • Proficient in Excel, Word and Oracle, • Strong mechanical aptitude, • Experience in the management of 6S projects #TAS Compensation Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Job Description and Responsibilities Rocky Mountain Steel Mills is seeking a Production Supervisor for our Seamless Mill located in Pueblo, Colorado. This position offers the opportunity to lead dynamic teams, foster innovation, and drive efficiency in our production line. As a key player within our company, you will collaborate closely with cross-functional departments, including quality assurance and safety, to maintain high standards and meet production targets. • Perform daily mill inspections with an eye for safety and productivity issues, coordinate with mill support groups to design and implement countermeasures, • Use LEAN manufacturing tools to engage employees to continuously improve mill operations, • Schedule and maintain shift manpower for mill operations and training, • Onboard new bargaining employees, ensure that adequate training is taking place and complete timely 720 probation performance evaluations, • Responsible for managing an operational and quality team during manufacturing operations and while performing operational maintenance of mechanical equipment including hydraulic, pneumatic, electrical, and mechanical systems, • Maintain necessary inventory of mill supplies, interface with storehouse and vendors as needed for resupply and trials, • Maintain and correct electronic and written records including shift performance, heat traceability, and quality assurance, • Maintain coaching documents (Note to Self) for all conversations surrounding attendance, behavior, safety, and performance, • Maintain KRONOS Pay System by reviewing, editing, and approving employee timecards daily Requirements • Bachelors of Science Degree or equivalent experience, • Three years of industrial supervisory experience, • Proficient in Microsoft Office - Word and Excel, • Previous experience using Oracle, • Excellent planning, time management, and organizational skills, • Proven ability to organize and motivate production teams for safe, high-quality results and maximum productivity, • Demonstrated initiative to identify areas, propose and initiate solutions, • Comfortable working a rotating (days and nights) schedule, as well as holidays and weekends as needed #TAS Compensation: $85,000 - $95,000 Open & Closing Dates: 2/13/2026 - 3/31/2026 Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Job Description and Responsibilities We are seeking a Mill Electrical Technician to join our team at our plant located in Pueblo, Colorado. As a Mill Electrical Technician (MET), you will provide all necessary electrical, electronic and combustion-instrumentation maintenance to all areas of the Mill in a safe and efficient manner. This position reports to the Superintendent of Maintenance. • Serve the function(s) of a Combustion-Instrumentation Technician, Electronic Repairman and/or Electrical Inspector (Maintenance Electrician) depending upon training and certification, • Complete the RMSM training program to become skilled in all three of the crafts mentioned above, • Troubleshoot, repair, dismantle, assemble and install a variety of equipment throughout the mill, • Work with Electric Shop, Combustion Lab and Electronic Shop equipment and tools, mobile equipment of every kind, controls, switches, valves, ovens, furnaces, machinery, cranes, prints and drawings, • Observe lockout procedures, • Keep work area and equipment clean and orderly, • Perform routine maintenance and assisting Maintenance personnel, • Operate overhead cranes as needed, • Work in both inside and outside environmental conditions, while exposed to elevated noise levels, vibrations, extreme cold and heat; conditions which require use of a respirator or dust mask; in close proximity to moving parts, electrical currents; working on scaffolding and high places; exposure to natural gas, high heat, hot surfaces, molten metal, chemicals, oils and lubricants, • Obtain and maintain OSHA 10 and equipment certifications, as required Requirements • Must have completed or have the equivalence of a craft apprenticeship in one of the following three crafts: Combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician), • 1 - 3 years of experience as an electrician in heavy industry, manufacturing, or mining; experience working with machinery, overhead cranes, equipment operation or a closely related field preferred, • Valid Colorado's license and mobile equipment qualification, • Strong troubleshooting, repair and installation skills, • Must be a self-starter with the ability to work with minimal supervision and manage your time when given multiple tasks, • Must have excellent interpersonal communication skills and the ability to collaborate effectively with all levels of personnel, • Physical ability to climb, walk, balance, stoop, kneel, crouch, crawl, make repetitive motions, hear, etc. and the ability to lift up to 75 pounds, • Qualified Candidates will be required to demonstrate proficiency through testing The above statement reflects the general details considered necessary to describe the principal functions of the job identified, and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. • $38.25 to $45.00 per hour depending on experience, • Shift differential #TAH Open & Closing Dates: 8/1/2025 - 3/1/2026 Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Job Description and Responsibilities We are seeking a Machinist to join our Maintenance team at our Pueblo, Colorado location. As a machinist you will machine, disassemble, and assemble parts for equipment and machines in a safe manner. This position reports to the Maintenance Superintendent. • Use lathes, milling machines, vertical and horizontal boring mills, shapers/slotter machines, surface and cylindrical grinders, radial drill presses, appropriate hand, power and measuring tools, radio controlled overhead cranes, forklifts, presses and all other shop equipment, • Work Bench-floor & field work, including alignments, • Utilize materials which include castings, forgings, bar stock flats and rounds, • Read prints and drawings, layout and plan work according to blueprints, and select proper materials and machines necessary for precision machining of product, • Test, inspect, dismantle, assemble and repair machined product accurately while making provisions for handling of materials, equipment and tools when needed, • Observe all safety rules and LOTO procedures, • Keep work area and equipment clean and orderly, • Perform routine maintenance and assists Maintenance personnel, • Work in both inside and outside environmental conditions, while exposed to elevated noise levels, oils solvents, and oil based products, extreme cold and heat; close proximity to moving parts, chips, shavings, scale, and sharp tools, • Obtain and maintain OSHA 10 and equipment certifications, as required, • Machinist Apprenticeship, AAS degree in Machining Technology or equivalent in an applicable field, • Demonstrated proficiency in all categories of Machining Technology, including critical alignments and sophisticated measuring tools, • Ability to perform installation and set-up of "Class 5" bearings & Babbitt Bearing Fits, • Competent in manipulating numbers, quantities, shapes and spaces; able to take precise measurements and calculate necessary dimensions, • Ability to repair machinery required in operating departments and roll shops, • Valid Colorado Drivers License, • Must be a self-starter with the ability to work with minimal supervision and manage your time when given multiple tasks, • Must have excellent interpersonal communication skills and the ability to collaborate effectively with all levels of personnel, • Physical ability to climb, walk, balance, stoop, kneel, crouch, crawl, make repetitive motions, hear, etc. and the ability to constantly exert forces up to 50 pounds and frequently exert forces up to 100 pounds to lift, carry, push and pull, • Qualified Candidates will be required to demonstrate proficiency through testing Open & Closing Dates: 8/1/2025 - 3/1/2026 #TAH The above statement reflects the general details considered necessary to describe the principal functions of the job identified and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. • $28.37 to $32.97 per hour with incremental hourly, • A bonus may be paid to eligible employees based upon organizational performance, • Family medical, dental, and prescription coverage, • Short and long term disability programs, • Pension plan and 401K with employer match, • Flexible Spending and Health Savings Accounts, • Employer-provided Group Life and Voluntary Life Insurance options, • Paid vacations, sick time and 10 paid holiday days per year, • Apprenticeship and career advancement within the company, • Tuition reimbursement While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Rocky Mountain Steel Mills is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Rocky Mountain Steel Mills is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers. Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. We are seeking a Mill Electrical Technician Assistant to join our team at our plant located in Pueblo, Colorado. The Mill Electrical Technician (MET) Assistant will provide all necessary electrical, electronic and combustion-instrumentation maintenance to all areas of the Mill in a safe and efficient manner. This position reports to the Superintendent of Maintenance. • Serve the function(s) of a Combustion-Instrumentation Technician, Electronic Repairman and/or Electrical Inspector (Maintenance Electrician) depending upon training and certification, • Complete the RMSM training program to become skilled in all three of the crafts mentioned above, • Troubleshoot, repair, dismantle, assemble and install a variety of equipment throughout the mill, • Work with Electric Shop, Combustion Lab and Electronic Shop equipment and tools, mobile equipment of every kind, controls, switches, valves, ovens, furnaces, machinery, cranes, prints and drawings, • Observe lockout procedures, • Keep work area and equipment clean and orderly, • Perform routine maintenance and assisting Maintenance personnel, • Operate overhead cranes as needed, • Work in both inside and outside environmental conditions, while exposed to elevated noise levels, vibrations, extreme cold and heat; conditions which require use of a respirator or dust mask; in close proximity to moving parts, electrical currents; working on scaffolding and high places; exposure to natural gas, high heat, hot surfaces, molten metal, chemicals, oils and lubricants, • Operation of overhead cranes, • Attend courses and assessments to become skilled in one of the three crafts, as defined by the training program, • Obtain and maintain OSHA 10 and equipment certifications, as required Requirements • Associates Degree or 2 years of experience in applicable field, • Valid Colorado's license and mobile equipment qualification, • Strong troubleshooting, repair and installation skills, • Must be a self-starter with the ability to work with minimal supervision and manage your time when given multiple tasks, • Must have excellent interpersonal communication skills and the ability to collaborate effectively with all levels of personnel, • Physical ability to climb, walk, balance, stoop, kneel, crouch, crawl, make repetitive motions, hear, etc. and the ability to lift up to 75 pounds, • Qualified Candidates will be required to demonstrate proficiency through testing #TAH Open & Closing Dates: 8/1/2025 - 3/1/2026 The above statement reflects the general details considered necessary to describe the principal functions of the job identified, and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. Compensation • $29.07 per hour, • Shift differential Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Job Description and Responsibilities We are seeking a Mill Electrical Technician to join our team at our plant located in Pueblo, Colorado. As a Mill Electrical Technician (MET), you will provide all necessary electrical, electronic and combustion-instrumentation maintenance to all areas of the Mill in a safe and efficient manner. This position reports to the Superintendent of Maintenance. • $32.51 - Mill Electrical Technician - Trainee - must have the equivalence in one of three crafts which include combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician), • $35.19 - Mill Electrical Technician - Starter - must have the equivalence in two of three crafts which include combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician), • $ 38.25 to $45.00 per hour depending on experience - Mill Electrical Technician - Standard - must posses an electrical journeyman license or equivalent education/experience., • Relocation Assistance available between $5,000- $10,000 depending on location, • Shift differential, • Serve the function(s) of a Combustion-Instrumentation Technician, Electronic Repairman and/or Electrical Inspector (Maintenance Electrician) depending upon training and certification, • Complete the RMSM training program to become skilled in all three of the crafts mentioned above, • Troubleshoot, repair, dismantle, assemble and install a variety of equipment throughout the mill, • Work with Electric Shop, Combustion Lab and Electronic Shop equipment and tools, mobile equipment of every kind, controls, switches, valves, ovens, furnaces, machinery, cranes, prints and drawings, • Observe lockout procedures, • Keep work area and equipment clean and orderly, • Perform routine maintenance and assisting Maintenance personnel, • Operate overhead cranes as needed, • Work in both inside and outside environmental conditions, while exposed to elevated noise levels, vibrations, extreme cold and heat; conditions which require use of a respirator or dust mask; in close proximity to moving parts, electrical currents; working on scaffolding and high places; exposure to natural gas, high heat, hot surfaces, molten metal, chemicals, oils and lubricants, • Must have completed or have the equivalence of a craft apprenticeship in one of the following three crafts: Combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician), • 1 - 3 years of experience as an electrician in heavy industry, manufacturing, or mining; experience working with machinery, overhead cranes, equipment operation or a closely related field preferred, • Valid Colorado license and mobile equipment qualification, • Strong troubleshooting, repair and installation skills, • Must be a self-starter with the ability to work with minimal supervision and manage your time when given multiple tasks, • Must have excellent interpersonal communication skills and the ability to collaborate effectively with all levels of personnel, • Physical ability to climb, walk, balance, stoop, kneel, crouch, crawl, make repetitive motions, hear, etc. and the ability to lift up to 75 pounds, • Qualified Candidates will be required to demonstrate proficiency through testing #TAH Open & Closing Dates: 8/1/2025 - 3/1/2026 The above statement reflects the general details considered necessary to describe the principal functions of the job identified and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Job Description • Primary Function - A crane technician must have a minimum of 2,000 hours of relevant work experience and training related to maintaining, inspecting, servicing, repairing cranes and rigging. This individual shall have a working knowledge of how to identify deficiencies and make repairs to mechanical and electrical crane components and associated hoisting equipment., • Machines, Equipment & Materials Used - All cranes, mobile equipment, appropriate hand, power, alignment and measuring tools, prints and drawings, necessary safety equipment. Machinery, equipment, tools and materials that are used by millwrights, welders, electronic repairmen, maintenance electricians, electrical inspectors, mechanical inspectors, and rigging inspectors., • Source of Supervision - Manager Maintenance, Manager cranes, Crane Maintenance Foreman, General Foreman Shops, Foreman Shops, Mill Maintenance foreman, Mill Electrical Foreman., • Essential Job Functions - Must be certified in 1 of the following, Overhead Crane Mechanical Maintenance or Overhead Crane Electrical Maintenance. Take courses and pass tests to be certified in all 4 crafts (Rigging Inspectors, Crane Inspectors, Crane Maintenance Mechanical, Crane Maintenance Electrical) and maintain certifications as a Crane Inspector and Rigging Inspector. Skilled in troubleshooting, alignment, repairing, dismantling, assembling, installing, and inspecting all cranes and rigging. Must understand hand signals and be trained in the operation of all cranes. Must be competent to make calls and remove cranes and rigging from service when deemed unsafe. Must have a valid driver's license and mobile equipment qualifications., • Essential Physical Activities - Must be comfortable with heights and able to climb, balance, stoop, crawl, reach, walk, push, pull, lift, carry, finger, grasp, feel, hear, talk to communicate, and make repetitive motions. Needs to see to perform maintenance tasks, inspection tasks, drive, and read prints. constantly exerts forces up to 50lbs and frequently exerts forces up to 50lbs to lift, carry, push, pull., • Work Conditions - Subject to both inside and outside environmental conditions. Exposed to elevated noise levels, vibrations, and extreme cold and heat. Physical Hazards-Close proximity to moving parts and electrical currents, working off elevated lifts and high places, exposure to natural gas, high heat, hot surfaces, molten metal, chemicals, oils and lubricants. Atmospheric conditions may require the use of a respirator. #TAH Open & Closing Dates: 11/18/2025 - 6/18/2026 The above statement reflects the general details considered necessary to describe the principal functions of the job identified, and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. • $39.59- $46.58 per hour depending on experience Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Rocky Mountain Steel Mills in Pueblo, Colorado is seeking a Project Engineer to support our Steelmaking operations. This position will support engineering, maintenance, and capital improvement projects through our manufacturing facility. Job Description and Responsibilities Support and collaborate with operations, maintenance, safety and reliability in capital improvement projects that support upgrades, plant expansions, process improvements and preventative and predictive maintenance. • Lead in the planning, designing, and executing of mechanical engineer projects by preparing documentation, drawings, technical specifications, and reports, • Participate in equipment installation, commissioning, and performance validation and prepare reports of the outcomes, • Lead Root Cause Analysis (RCA), develop and update maintenance standard operating procedures (SOPs) and recommend improvements to enhance equipment reliability and operational efficiency, • Assist in scope development, budgeting, scheduling of capital projects and work with vendors and contractors during equipment procurement and installation, • Support and manage project timelines, cost control and ensure compliance of safety, environmental and regulatory standards, • Co-lead in lean manufacturing, continuous improvement initiatives and identify opportunities for cost reduction and efficiency improvements Requirements • Bachelor's degree in Mechanical Engineering or related field required, • Prior experience in metals manufacturing, heavy industry required, • 2-4 years mechanical engineering experience required, • Project based experience preferred, • strong technical aptitude and problem solving skills, • Knowledge of mechanical systems such as pumps, motors, conveyors, hydraulic, pneumatic systems, • Familiarity with CAD Software, • Strong analytical and problem solving skills, • Knowledge of safety standards and practices #TAS Compensation $80,000 - $90,000 Open & Closing Dates: 3/13/2026 - 4/28/2026 Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. We are seeking a Mill Mechanical Technician to join our team at our plant located in Pueblo, Colorado. As a Mill Mechanical Technician (MMT), you will provide all necessary mechanical maintenance to all areas of the Mill in a safe and efficient manner. You will be responsible for Mechanical maintenance, installation, repair, assembly or dismantling of mechanical equipment such as gear boxes, hydraulic/pneumatic systems, pumps, packings, seals, piping and valves, mechanical power transmission and drive systems, couplings, shaft alignments, lubricants, overhead cranes and other heavy industrial equipment. You will trouble shoot, determine and obtain parts, and make necessary repairs to Mill Machinery. This position reports to the Superintendent of Maintenance. • Serve the function(s) of a Boilermaker, Millwright, Pipefitter and Welder depending upon training and certification, • Complete the training program to become skilled in all four of the crafts mentioned above, • Take control of any situation to install, repair, assemble or dismantle anything in the Mill, • Work with all Shops machines and equipment, mobile equipment of every kind, all structures, production equipment, systems, appropriate hand, power and measuring tools, prints and drawings and necessary safety equipment, • Observe lockout procedures, • Keep work area and equipment clean and orderly, • Perform routine maintenance and assisting Maintenance personnel, • Operate overhead cranes as needed, • Work in both inside and outside environmental conditions, while exposed to elevated noise levels, vibrations, extreme cold and heat; conditions which require use of a respirator or dust mask; in close proximity to moving parts, electrical currents; working on scaffolding and high places; exposure to natural gas, high heat, hot surfaces, molten metal, chemicals, oils and lubricants, • Obtain and maintain OSHA 10 and equipment certifications, as required Requirements • Must have completed or have the equivalence of a craft apprenticeship in one of the following four crafts: Boilermaker, Millwright, Pipefitter and Welder, • Strong background in hydraulic/pneumatic troubleshooting and repair skills, • 1 - 3 years of experience as an electrician in heavy industry, manufacturing, or mining; experience working with machinery, equipment operation or a closely related field preferred, • Must be able to read, understand and work from Mechanical Prints, drawings and schematics, • Strong troubleshooting, repair and installation skills, • Must have a valid Colorado driver's license and a mobile equipment qualification., • Strong troubleshooting, repair and installation skills, • Must be a self-starter with the ability to work with minimal supervision and manage your time when given multiple tasks, • Must have excellent interpersonal communication skills and the ability to collaborate effectively with all levels of personnel, • Physical ability to climb, walk, balance, stoop, kneel, crouch, crawl, make repetitive motions, hear, etc. and the ability to constantly exert forces up to 50 pounds and frequently exert forces up to 100 pounds to lift, carry, push and pull, • Qualified Candidates will be required to demonstrate proficiency through testing #TAH Open & Closing Dates: 8/1/2025 - 3/1/2026 The above statement reflects the general details considered necessary to describe the principal functions of the job identified, and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. • $30.60 to $45.00 per hour depending on experience, • Shift differential Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Job Description and Responsibilities We are seeking a Mill Electrical Technician to join our team at our plant located in Pueblo, Colorado. As a Mill Electrical Technician (MET), you will provide all necessary electrical, electronic and combustion-instrumentation maintenance to all areas of the Mill in a safe and efficient manner. This position reports to the Superintendent of Maintenance. • $32.51 - Mill Electrical Technician - Trainee - must have the equivalence in one of three crafts which include combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician), • $35.19 - Mill Electrical Technician - Starter - must have the equivalence in two of three crafts which include combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician), • $38.25 to $45.00 per hour depending on experience - Mill Electrical Technician - Standard - must possess an electrical journeyman license or equivalent education/experience., • Relocation Assistance available between $5,000- $10,000 depending on location, • Shift differential, • Serve the function(s) of a Combustion-Instrumentation Technician, Electronic Repairman and/or Electrical Inspector (Maintenance Electrician) depending upon training and certification, • Complete the RMSM training program to become skilled in all three of the crafts mentioned above, • Troubleshoot, repair, dismantle, assemble and install a variety of equipment throughout the mill, • Work with Electric Shop, Combustion Lab and Electronic Shop equipment and tools, mobile equipment of every kind, controls, switches, valves, ovens, furnaces, machinery, cranes, prints and drawings, • Observe lockout procedures, • Keep work area and equipment clean and orderly, • Perform routine maintenance and assisting Maintenance personnel, • Operate overhead cranes as needed, • Work in both inside and outside environmental conditions, while exposed to elevated noise levels, vibrations, extreme cold and heat; conditions which require use of a respirator or dust mask; in close proximity to moving parts, electrical currents; working on scaffolding and high places; exposure to natural gas, high heat, hot surfaces, molten metal, chemicals, oils and lubricants, • Must have completed or have the equivalence of a craft apprenticeship in one of the following three crafts: Combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician), • 1 - 3 years of experience as an electrician in heavy industry, manufacturing, or mining; experience working with machinery, overhead cranes, equipment operation or a closely related field preferred, • Valid Colorado license and mobile equipment qualification, • Strong troubleshooting, repair and installation skills, • Must be a self-starter with the ability to work with minimal supervision and manage your time when given multiple tasks, • Must have excellent interpersonal communication skills and the ability to collaborate effectively with all levels of personnel, • Physical ability to climb, walk, balance, stoop, kneel, crouch, crawl, make repetitive motions, hear, etc. and the ability to lift up to 75 pounds, • Qualified Candidates will be required to demonstrate proficiency through testing #TAH Open & Closing Dates: 8/1/2025 - 3/1/2026 The above statement reflects the general details considered necessary to describe the principal functions of the job identified and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Job Description and Responsibilities Rocky Mountain Steel Mills is looking for an Automation Engineer to join our Maintenance team at our plant located in Pueblo, Colorado. The Automation Engineer is responsible for developing new industrial processes and designing new process plants and equipment or modifying existing ones in an industrial setting. • Support rolling mills and steelmaking production and maintenance at highly automated steel manufacturing plant, • Design, develop, and implement control systems (hardware & software) to improve production times, steel quality, equipment performance, energy consumption, down-time reduction, and process automation, • Obtain complete understanding of company process control systems and their impact on the production line beginning with scrap melting through refining steel, liquid to solid transformation and finished product, • Make recommendations for development action; analyze, modify and improve programmable logic controllers (PLC) and human-machine interfaces (HMI), • Design and monitor performance indicators, create the necessary bridges between control site and company information systems, • Provide on-going maintenance support and resolution of process control system problems, including taking ownership of such problems to completion, • Write requirements specifications, and high-level design and systems architecture specifications related to control of steel production processes, • Project management responsibilities Requirements • Bachelor's Degree in Electrical or Mechanical Engineering, Automated Manufacturing Engineering or equivalent technical education, • 5+ years of relevant work experience, • Experience must include working with Allen-Bradley PLC (or Fanuc, Modicon, Toolbox) and VFD (variable frequency drives), • Proven problem solving and analytical skills, • Must be available to be on call and assist personnel in times of emergency and business needs #TAS Compensation • $100,000 - $140,000 Open & Closing Dates: 3/2/2026 - 4/28/2026 Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Job Description and Responsibilities Rocky Mountain Steel Mills is seeking a Maintenance Supervisor to join our Crane Crew Maintenance team at our plant located in Pueblo, Colorado. This position is responsible for supervising an assigned maintenance crew and coordinating with operations. • Training the workforce on safe work practices, • Implementing a preventive maintenance program, • Planning and follow through on maintenance repairs, • Developing new skill levels for members of assigned maintenance crews, • Equipment functionality and alignment, • Scheduling employee training sessions and meetings, • Maintaining KRONOS pay system by reviewing, editing and approving employee timecards daily, • Two year degree in the mechanical field, electrical field, or a completed accredited apprenticeship and/or five years of experience in machining, mechanical or electrical maintenance, • Four (4) year Mechanical or Electrical Engineering degree preferred, • Knowledge of hydraulic systems, • Technical experience with high voltage systems, motor control, process automation, • Crane maintenance experience required, • Proficient in blue print reading and troubleshooting of mechanical operations of equipment, • Experience supervising in a union environment preferred, • Proficient in Microsoft Word and Excel, • Strong leadership and communication skills, • Must be available to be on call and assist personnel in times of emergency and business needs, • Ability to work in both inside and outside environmental conditions, and be exposed to physical hazards, elevated noise levels, vibrations, and extreme cold and heat., • Ability to effectively manage change, • Must have a valid driver's license #TAS Compensation • $100,000 - $120,000 Open & Closing Dates: 3/12/2025 -4/23/2026 Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Job Description and Responsibilities Rocky Mountain Steel Mills is seeking a Maintenance Supervisor to join our Maintenance team at our plant located in Pueblo, Colorado. This position is responsible for supervising an assigned maintenance crew and coordinating with operations. • Training the workforce on safe work practices, • Implementing a preventive maintenance program, • Planning and follow through on maintenance repairs, • Developing new skill levels for members of assigned maintenance crews, • Equipment functionality and alignment, • Scheduling employee training sessions and meetings, • Maintaining KRONOS pay system by reviewing, editing and approving employee timecards daily, • Two year degree in the mechanical field, electrical field, or a completed accredited apprenticeship and/or five years of experience in machining, mechanical or electrical maintenance, • Four (4) year Mechanical or Electrical Engineering degree preferred, • Knowledge of hydraulic systems, • Technical experience with high voltage systems, motor control, process automation, • Proficient in blue print reading and troubleshooting of mechanical operations of equipment, • Experience supervising in a union environment preferred, • Proficient in Microsoft Word and Excel, • Strong leadership and communication skills, • Must be available to be on call and assist personnel in times of emergency and business needs, • Ability to work in both inside and outside environmental conditions, and be exposed to physical hazards, elevated noise levels, vibrations, and extreme cold and heat., • Ability to effectively manage change, • Must have a valid driver's license #TAS Compensation • $100,000 - $120,000 Open & Closing Dates: 3/5/2025 -4/23/2026 Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job Description Kia Retailers are offering skilled and experienced military Veterans with the opportunity to begin an inspiring career as a Kia Certified Service Technician. To support this Kia Retailer initiative, Kia America, Inc. has established the Kia Veterans Technician Apprenticeship Program (VTAP). Job Description • Diagnose, maintain, and repair Kia vehicles including engine, transmission, steering, suspension, brakes, HVAC, and electrical components, • Complete repair orders and warranty request orders in accordance with established Kia and Retailer policies and procedures, • Test drive vehicles, and analyze, diagnose, and repair components and systems using Kia diagnostic strategies, special equipment, and tools KUS and ERS make no warranties (expressed or implied) or guarantees of employment to any individual seeking to participate in the Kia Veteran Technician Apprenticeship Program (VTAP). All employment decisions are at the discretion of the specific Kia Retailer to which an employment application is made, conditional upon meeting eligibility, skill, and experience requirements to participate in VTAP. Requirements Qualifications • Honorable Discharge, • Valid Drivers License from any state with a clean driving record, • Experience in a technical / mechanical field is required Kia VTAP Apprenticeship Highlights: • Full-time employment with a participating Kia Retailer, • A program designed specifically for Veterans facilitated by Veterans!, • Participation in a one-year competency-based GI Bill approved apprenticeship leading to Kia Service Technician certification, • Access to all tools, equipment, vehicles, and training needed to complete the apprenticeship and certification process, • Eligible Veterans may apply for and receive a substantial GI Bill© Monthly Housing Allowance (MHA) during their apprenticeship

We're currently looking for individuals across the country to take part in remote paid market research, including online focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing y

Note : This is an educational program, not a job.Successful completion of the program does not guarantee employment but will equip you with valuable skills for the healthcare job market.Looking to start a rewarding career path in the healthcare industry? Use Dreambound to find a Pharmacy Technician

We're currently looking for individuals across the country to take part in remote paid research, including remote focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing your opi

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

Call Center / Remote] - Anywhere in U.Competitive pay / Medical, dental & vision / 401k / PTO - As a Customer Service Rep at Planet Home Lending, you will: Respond to borrower inbound calls concerning their account, ensuring high quality service and adhering to productivity and regulatory requiremen

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

Customer Support / Remote] - Anywhere in U.Medical, dental & vision / PTO / Paid training - As a Customer Service Rep at Assurant, you will: Handle inbound customer calls and/or e-mails with empathy and professionalism; Resolve issues, answer questions, and provide proactive solutions; Document inte

Call Center / Remote] - Anywhere in U.Up to $25-hr / Flexible Schedule / Health-Dental-Vision / PTO + Parental Leave - As a Customer Service Associate at Tandem Vet, you will: Provide exceptional customer service by answering incoming calls, responding to emails and live chats in a timely and profes

Customer Support / Remote] - Anywhere in U.Medical, dental & vision / 401k - As a Customer Service Rep at DGI Supply, you will: Handle customer and sales interactions via phone, email and tickets within the Customer Care Box; Process requests for quotations, order entry and product questions from cu

FedEx is seeking Retail Customer Associates to work in FedEx Office retail locations assisting customers with shipping services, printing services, and business service solutions.Retail Customer Associates are responsible for greeting customers, processing shipping orders, printing and copying docum

Home Depot - - Responsibilities: Process checkout and/or return transactions accurately and efficiently; Monitor and maintain the Self-Checkout area; Provide fast, friendly, helpful customer service and product information; Escalate issues to a Head Cashier as needed; Assist in training and coachin

Murphy USA - 1707 South Pueblo Boulevard - Responsibilities: Assisting customers with purchases and fuel transactions; Operating cash register; Restocking merchandise.

Dollar Tree - 1803 South Pueblo Boulevard - Responsibilities: Assist customers with questions and recommendations; Manage sales transactions while working assigned cash register; Maintain security of cash and protect company assets; Keep the store well-stocked, and recover merchandise; Receive merch

Government Jobs - Temporary/Seasonal - $14.Hourly This is a non-exempt, seasonal position limited to 1300 hours annually.Under the supervision of the Pool Manager and Assistant Pool Manager sells admission tickets, performs miscellaneous clerical duties, and does related work as required.Assists in

Ulta Beauty - - Responsibilities: Handle sales, refunds, and exchanges at cashwrap; Provide exceptional guest service and product recommendations; Assist in training new cashiers and cross-training; Take ownership of cashwrap displays, supplies, and impulse fixtures to ensure guest-readiness; Suppo

Walmart - 4200 Dillon Dr - [Retail Associate / Team Member / up to $26-hr] - As a Cashier at Walmart, you'll: Smile, greet, and thank customers with a positive attitude; Stand for long periods of time while checking out customers quickly and accurately; Keep your area clean and presentable; Answer c

Family Dollar - 2639 North Elizabeth Street - Responsibilities: Assist customers with questions and recommendations; Manage sales transactions while working assigned cash register; Maintain security of cash and protect company assets; Keep the store well-stocked, and recover merchandise; Responsible

ALDI is seeking Customer Service Associates to work as Cashiers and Stockers supporting daily store operations in a fast-paced grocery store environment.Associates are responsible for operating the cash register, assisting customers, stocking shelves, unloading deliveries, organizing merchandise, cl

Part Time Production Shift Lead (Night Shift) Saturday & Sunday (7:00pm - 7:00am) - $32.We are currently looking for a Part Time Production Shift Lead - Night Shift Sat.Reporting to the Plant Manager, the Weekend Production Shift Lead will be responsible for coordinating production work that include

Pueblo Community Health Center offers a flexible benefits program to full-time and part-time employees working 20 hours or more per week.Benefit opportunities presently available to employees are listed below:.Long-Term Disability Insurance.Short-Term Disability Insurance.Cafeteria 125 Flexible Spen

Mary-Corwin has cared for the people of Pueblo and the surrounding southern Colorado communities.Driven by a commitment to Pueblo and our healing ministry, St.Mary- Corwin is focused on its core areas of clinical strength: cancer care and orthopedic services.Mary-Corwin to serve the southern Colorad

Provide exceptional customer service to help people live healthier lives by treating our customers/employees in a fair and ethical manner, providing a safe, clean, inclusive environment, being a responsible member of the community, providing the right products, services, and care at the right time w

The actual hourly rate will equal or exceed the required minimum wage applicable to the job location.Additional compensation includes annual or quarterly performance incentives.Additional compensation in the form of premiums may be paid in amounts ranging from $0.Premiums may be based on schedule, f

Join our team as a Pharmacy Technician, where you will play a crucial role in enhancing the health and wellness of our community.We are committed to providing exceptional customer service while upholding our values of respect, honesty, integrity, diversity, inclusion, and safety.You will be responsi

Job Summary and Responsibilities.As our Certified Pharmacy Technician, you will play a critical role in supporting the complex and personalized medication needs of patients.Every day, you will meticulously process and dispense specialty medication prescriptions, including sterile compounding, along