Offres aviation à Austin, TexasCréer des alertes d'emploi

Job Description Summary Incumbent is responsible for the safe, orderly and expeditious flow of air traffic on the Non-movement areas of the airport, utilizing surveillance radar-like targets and camera imagery. Dimensions of Position Incumbent works under the general supervision of the Ramp Tower Manager who relies on the incumbent to perform established duties independently. On new or revised procedures, the manager gives detailed instructions and observes and checks work during or immediately after completion according to complexity of the task or until satisfied the incumbent is able to perform the procedure independently. Accountability • Makes decisions involving:, • The sequence and separation of gate traffic ready for pushback and engine start., • Plans the sequence of arriving traffic, using provided electronic aids, prior to arrival at the airport., • The merging of arriving and pushback traffic that will assure all aircraft equitable treatment and provide for minimum delays., • Determines the usability of and resolves problems with:, • Communications equipment, • Video Camera displays (radar and imagery), • STARS (radar) display, • ASDE-X (radar) display, • Gate Management computer programs, • The Ramp Tower is a positive control facility. Incumbent will be required to instruct aircraft how and when to push-back, instruct aircraft when to taxi, who to follow, taxi route, intermediate hold points, route clearance limit, and frequency transfer points., • Incumbent will initiate, and respond to, necessary coordination with the FAA ATCT Ground Control Position concerning the movements of inbound and outbound aircraft., • Execute procedures required of the local Surface Movement Guidance and Control System Plan (SMGCS) during periods of reduced visibility, execution of the local Ice Threat Management Plan during periods of aircraft anti-icing, and the local Gate Hold program when initiated by the ATCT., • Provide flight crews with, when required, field conditions, altimeter settings, weather conditions, operating status of navigational aids and NOTAMS. Provide the ATCT with pilot reported adverse weather, bird activity and unsafe or unusual airport activities or conditions., • Determine whether a given situation is or may develop into an emergency; and notifies, via “Crash Phoneâ€?, emergency services., • Performs lower grade level duties as necessary to meet operational requirements and for proficiency maintenance. Education: High School Graduate Experience: Previous aviation experience is desired as a minimum i.e. airline dispatcher, pilot, air traffic controller, experience handling aircraft on the airport ramp. Position is subject to drug and/or alcohol testing per RVA's non-DOT policy (pre-employment, random, reasonable cause/suspicion, post-accident).

Job DescriptionSkyGrid, a Boeing Company, exists to open the sky for autonomous flight. Based in Austin, Texas, SkyGrid builds ground based high-assurance third-party services to enable the safe operations and airspace integration of highly automated and autonomous aircraft. SkyGrid also acts as a key operational nexus for advanced air mobility, integrating and managing data, infrastructure, access, and traffic to support seamless and efficient air traffic services. The SkyGrid team is looking for a Certification Engineer who will own all aspects of the certification of next-generation airspace management system for both autonomous and unmanned aircraft systems. You will ensure that all regulatory requirements are identified and captured, and compliance approaches are defined and agreed upon with regulatory authorities. You will be the principal owner of both the certification plan and compliance matrix at the system level, in collaboration with the SkyGrid Engineering team. You will also ensure all certification requirements are allocated to the applicable focals within SkyGrid. You will work closely with members of the Assurance Group, Engineering, Business Development, and the Program Management Office so timely and cost-effective certification solutions are developed throughout the lifecycle. The ideal candidate will possess a deep domain understanding and knowledge within the aviation industry, but will thrive in a non-traditional, development program with the pace of a start-up.Performance Objectives: • Generate Program-Specific Certification Plan (PSCP), including means of compliance and identification of artifacts for demonstrating compliance., • Own, track, and ensure certification deliverables and processes are established., • Ensure all required regulatory requirements have been identified, met or have reached an agreement for deviation/exemption., • Ensure all certification requirements are allocated to cognizant internal Systems, Software, and Hardware teams., • Ensure certification risks are identified and elevated for resolution in a timely manner.Responsibilities:, • Develop and coordinate System Certification Plan (SCP), System Development Plan (SDP), and System Configuration Management Plan (SCMP)., • Generate, allocate, validate/verify System Level certification requirements., • Support Certification Program Manager with tracking and reporting progress on certification deliverables., • Identify and communicate certification risks and mitigation strategies to relevant parties for timely resolution., • Collaborate with technical leads to establish design concepts, criteria and engineering efforts for product development, testing, and integration that meets certification requirements., • Engage with both domestic and international regulatory authorities on certification related matters., • Monitor emerging certification standards that may be applicable to SkyGrid systems and services., • Participate in defining requirements that shape SkyGrid’s corporate Quality Management, Cybersecurity, and Safety Management System in order to meet regulations., • Represent the voice of the regulator internally.Qualifications:, • Bachelor’s degree or higher in Engineering., • 5+ years of experience working in a highly technical, aerospace-related industry., • 2+ years of experience in aircraft or systems certification., • Strong communication skills, self-driven, and capable of participating in a range of technical discussions., • Experience with certification of aircraft systems, or automated data service providers, including demonstration of compliance to FAA 14 CFR Part 23, Part 25, Part 125, NATO STANAG 4671, ARP4754A, ARP4761, DO-178, DO-254, DO-160, Part 146, or other applicable aerospace standards., • Experience with systems engineering principles and requirement management tools such as DOORS, Polarion, or Cameo System Modeler., • Can act independently to determine methods and procedures on new or special assignments.Preferred Qualifications:, • Presenting concisely to large groups of people including customers, regulatory authorities, internal technical groups, and leadership team., • Experience with Automated Data Service Provider (e.g. USS, PSU) certification and approval concepts., • Experience working with aviation regulatory agencies, either domestically or internationally.Join Our Team and Enjoy Exceptional Benefits:, • Comprehensive Health Coverage from Day One: Enjoy immediate access to medical, dental, and vision insurance, including HSA and FSA options., • Generous Retirement Contributions: Benefit from an automatic company 401k contribution program, with no match required, plus an additional company matching program to boost your retirement savings., • Calm Annual Membership: Prioritize your mental health with complimentary access to mindfulness and meditation resources., • Discounted ClassPass Membership: Stay active and healthy with access to thousands of fitness studios and gyms nationwide., • Investment in Your Growth: Receive an annual stipend for learning and development to support your continuous education and skill development, • Engaging Team Activities: Participate in quarterly team-building events and celebrations organized by our dedicated culture committee.

Job Description Who We Are OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Program. Come join us! For more information visit OWLServices.com and follow us on LinkedIn. Role We’re seeking a skilled and detail-driven Commercial Electrical Estimator to join our growing preconstruction team. This role is central to shaping competitive bids and driving the success of complex commercial projects across Texas and beyond. You’ll collaborate with project managers, engineers, and trade partners to deliver precise, strategic estimates that win work and build lasting client relationships. Please be aware that this is a an in-office position in Fort Worth, Tx. Key Responsibilities • Develop comprehensive cost estimates by analyzing labor, materials, equipment, and project timelines., • Review blueprints, specifications, and proposals to ensure accurate takeoffs and scope alignment., • Resolve design or specification discrepancies through proactive communication and problem-solving., • Present detailed and well-documented estimates with clear numerical and descriptive data., • Produce conceptual, schematic, and design development budgets with precision., • Monitor market trends and commodity pricing to maintain competitive, up-to-date cost models., • Prepare subcontractor bid packages and solicit qualified vendor participation., • Collaborate closely with internal teams on bid strategy, project scheduling, and value engineering., • Support special reports and trend analyses to guide pricing and strategic decisions., • Cultivate strong relationships with subcontractors, clients, and design professionals. Qualifications • 6–10 years (+) of commercial electrical construction experience., • Journeyman or Master Electrician License (Texas), or equivalent field experience., • 6+ years in estimating or commercial construction management., • Strong ability to read plans, specifications, and perform detailed quantity takeoffs., • Experience with estimating software such as Accubid, Trimble, or Conest, and proficiency with Microsoft Office applications., • Familiarity with Sage, BIM/Revit, or CAD platforms preferred., • Excellent organizational and analytical skills with the ability to manage multiple bids simultaneously., • Strong written and verbal communication skills; professional and detail-oriented., • Team-focused, adaptable, and motivated to tackle new challenges in a dynamic environment., • Underground and land balancing experience is a plus. Benefits We’re proud to offer a comprehensive and competitive benefits package designed to support your success—both on and off the job: • Paid holidays and flexible time off for work-life balance, • 401(k) with company match to support your financial future, • Health, dental, and vision insurance options, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • Disability & Occupational Accident Insurance coverage, • Company-paid life insurance, • Employee Assistance Program (EAP) for mental health and family support, • World-class paid training program to enhance your skills and long-term career growth, • Relocation assistance available for the right candidate Why Join Us • Work with a respected, growth-driven commercial contractor known for integrity, precision, and execution., • Collaborate with a high-performing team of professionals who value craftsmanship and innovation., • Competitive compensation with clear paths for advancement., • A culture that emphasizes teamwork, continuous learning, and lasting success. Requisition #

Job Description About Ardurra At Ardurra, we’re more than an engineering and consulting firm—we’re a team dedicated to shaping the future through smart solutions and strong partnerships. Our mission is simple: empower our people to deliver innovative, sustainable projects that make a real impact on communities. Guided by our core values—Client Driven, Uniquely Nimble, Low Bureaucracy, Team Collaboration, Unlimited Opportunities, Relationship Focused, and Entrepreneurial Spirit—we foster a culture that puts people first. Overview Ardurra is seeking an experienced Aviation Project Engineer to join our dynamic Aviation Group in Texas. This role offers the opportunity to work on impactful aviation projects while enjoying the flexibility of a fully remote position for the right candidate, provided you reside in Texas and are willing to travel to client sites, project locations, and offices as needed. A current Professional Engineer (PE) license or Engineer in Training (EIT) is required. Position Summary: Ardurra is looking for an Aviation Project Engineer for our growing aviation group. In this key role, you will be responsible for overseeing projects and serving as a client manager for airport design and construction projects within specific regions. The ideal individual will provide mentoring to junior staff and QA/QC. The ideal individual for this role will be joining a very well-established aviation group with a diverse workload in airfield service projects. From project planning, regulatory approvals, environmental compliance, financial planning, legislative strategy, land acquisition, and design phasing, this individual will be heavily involved in projects from design to completion! Required Qualifications • Bachelor’s Degree in Civil Engineering or a related field, • PE License required (EIT will be considered), • 4+ years' experience in the airport design and/or construction field, either in private industry or government service, • Airport design and project management experience a must, • Aviation engineering & construction administration experience required, • Strong knowledge of FAA advisory circulars related to airport design and the FAA grant process, • Strong computer skills, • Excellent communication skills, • Ability to lead and mentor existing staff and develop new staff as needed to support growth of the aviation group, • Project management, • Marketing, • Client development, • Staff Supervision and mentoring, • Quality control of project design and contract documents, • Prolonged periods sitting at a desk and working on a computer, • Ability to navigate various locations and settings of the company, • Occasionally lift and/or move up to 25 pounds, • Must possess a valid driver’s license and be able to safely operate a vehicle $85,000 - 110,000+ (DOE) Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-FP1

Job DescriptionSkyGrid, a Boeing Company, exists to open the sky for autonomous flight. Based in Austin, Texas, SkyGrid builds ground based high-assurance third-party services to enable the safe operations and airspace integration of highly automated and autonomous aircraft. SkyGrid also acts as a key operational nexus for advanced air mobility, integrating and managing data, infrastructure, access, and traffic to support seamless and efficient air traffic services. SkyGrid is seeking an Autonomy Engineer III to join our Advanced Air Mobility (AAM) R&D team to build the future of safe, efficient, and scalable Air Traffic Management (ATM) solutions. You will be responsible for taking autonomy concepts from early-stage ideas through prototyping and validation to establish system requirements. In this role, you will focus on maturing autonomy capabilities to support technology maturation through prototype development. You will collaborate with multidisciplinary teams, external partners, and customers. As an Autonomy Engineer III, you will be provided opportunities to establish yourself as an externally recognized leader for our technology. This position also involves occasional travel to support lab and flight test activities, and internal and industry demonstration events. Performance Objectives: • Develop, analyze, and evaluate enhancements to ground-based traffic surveillance solutions., • Demonstrate successful testing and simulation results for one or more autonomy capabilities., • Contribute to Technical Maturation Reports supporting progression towards Technology Readiness Level (TRL) 5., • Further mature capabilities beyond TRL 5 in concert with cross-functional teams such as software, product, and V&V., • Build strong and collaborative working relationships with cross-functional teams and external partners., • Ensure all developed code and models meet appropriate standards, for example DO-178C., • Support deployment for field tests or demonstrations., • Deliver multiple new functions and enhancements to SkyGrid services., • Ensure all software artifacts – including models, generated code, handwritten code, and test cases – comply with applicable standards (internal and external)., • Lead technical reviews of assigned functions or enhancements with stakeholders., • Engage with team members to learn and impart best practices to improve our organization. Responsibilities:, • Take autonomy concepts through iterative R&D prototyping, testing, and analysis to generate formal system requirements., • Implement algorithms using a variety of approaches with Simulink, C/C++, MATLAB, Python, and others as appropriate., • Prepare documentation and contribute to varying technical documents, particularly technology maturation reports., • Collaborate with internal teams to define functional and performance requirements for autonomy-based functions., • Collaborate with software engineers to design and develop integration interfaces within the overarching product codebase., • Participate in design reviews, Software-in-the-Loop (SIL) / Hardware-in-the-Loop (HIL) testing, live flight testing, and demonstration events., • Foster collaboration by engaging with external organizations, research institutions, and industry partners, as well as supporting technical publications and conference contributions. Qualifications:, • Minimum 6 years of experience in autonomy, control systems, robotics, or aerospace software development., • B.S. in Computer Science, Aerospace Engineering, Robotics, or related field., • Work experience in algorithm development or R&D for autonomous systems., • Experience with mathematical formulation of vehicle kinematics and dynamics, route planning, optimization, conflict detection and resolution algorithms, • Proficiency in software prototyping leveraging varied appropriate technologies such as Simulink, MATLAB, C/C++, and Python., • Strong understanding of networking principles and communication protocols., • Strong proficiency in authoring APIs, ICDs, and other technical documentation for software and hardware integration., • Familiarity with R&D of algorithms and functions that enable autonomous systems., • Development, integration, and testing in SIL/HIL simulation environments., • define the problem statement., • conduct state-of-the-art analysis., • analyze problems that are not clearly defined., • identify possible solutions., • Transportation networks., • Tactical or strategic conflict detection and resolution for air vehicles., • Flight planning., • Machine learning., • Resource optimization., • Advanced Air Mobility., • Bayesian or probabilistic modelling., • Control theory. Preferred Qualifications:, • M.S. or Ph.D. in Computer Science, Aerospace Engineering, Robotics, or related field — or equivalent industry experience., • Completion of MathWorks certified training in topics such as Simulink, Model-Based Design, and Embedded Coder., • Familiarity with aviation and air traffic management operations., • Familiarity with developing software in alignment with industry standards, such as DO-178C., • Experience developing software for Real-Time Operating Systems (RTOS)., • Experience contributing to evolving system and software requirements., • Strong interpersonal skills to work in a cross-functional team. Join Our Team and Enjoy Exceptional Benefits:, • Comprehensive Health Coverage from Day One: Enjoy immediate access to medical, dental, and vision insurance, including HSA and FSA options., • Generous Retirement Contributions: Benefit from an automatic company 401k contribution program, with no match required, plus an additional company matching program to boost your retirement savings., • Calm Annual Membership: Prioritize your mental health with complimentary access to mindfulness and meditation resources., • Discounted ClassPass Membership: Stay active and healthy with access to thousands of fitness studios and gyms nationwide., • Investment in Your Growth: Receive an annual stipend for learning and development to support your continuous education and skill development, • Engaging Team Activities: Participate in quarterly team-building events and celebrations organized by our dedicated culture committee.

Job DescriptionAt Skyways, we are building a new form of air transportation—what some call the flying car. Backed by fresh funding and a major STRATFI contract from the U.S. Air Force, we’re uniquely positioned to lead the next wave of aviation innovation. Our fully autonomous unmanned aerial vehicles (UAVs) represent a breakthrough opportunity to move goods—and soon, people—in ways that are faster, safer, and more efficient than ever before. Unlike anyone else in the industry, our strategy blends rapid iteration with real-world deployment, and it’s already paying off. Skyways is a fast-growing startup based in Austin, TX, supported by top Silicon Valley investors including Y Combinator. Though we’re early-stage, our vehicles are already in production and in the hands of paying commercial customers (see here and here). With robust financial backing and government partnerships accelerating our momentum, there’s never been a better time to join us and help build the future of transportation! The Opportunity We are looking for a Staff Manufacturing Engineer to take a leading role in scaling production of our autonomous aircraft. This is a high impact role. You will shape how we build vehicles at scale, create the processes and systems that make production predictable, and ensure that engineering and manufacturing are fully aligned as we move from prototype to commercial volume.What You'll Do: • Own development and optimization of manufacturing processes, tooling, jigs, and fixtures for efficient and scalable production., • Provide design for manufacturing feedback that drives cost, reliability, and repeatability for high volume builds., • Lead implementation of lean principles, automation, and continuous improvement across the production floor., • Partner with engineering, supply chain, and quality to solve build issues quickly and permanently., • Build clear documentation, perform root cause analysis, and select or specify production equipment., • Support and guide contract manufacturers as we scale output and introduce new revisions., • Help implement and shape our ERP and MRP workflows so aircraft builds, inventory, and quality are fully traceable.What You'll Bring:, • 6 plus years experience taking hardware products from prototype to real production with increasing ownership., • Strong knowledge of core manufacturing processes with deep experience in composites., • Proficiency with CAD and an expert level understanding of DFM and DFA., • Strong problem solving instincts and clear communication., • Experience using ERP or MRP systems to run production in a structured and traceable way., • Track record of thriving in environments where speed, ownership, and accountability matter.Bonus Points If You Have:, • Direct experience scaling products within the demanding aerospace industry., • Hands-on experience with automated manufacturing systems and robotics., • Comprehensive knowledge of aerospace quality standards (e.g., AS9100) and certification processes.

Job DescriptionWe are a rapidly growing, chef-driven catering and meal-production company serving corporate clients, high level athletes, school districts, and aviation partners. We are seeking an Executive Chef who can lead a high-volume kitchen with precision, integrity, and heart, someone who is as committed to operational excellence as they are to beautiful, thoughtful food. We are committed to producing clean, food that is part of the solution. This is a leadership role for someone who thrives in scaling systems, developing people, and delivering consistent, impeccable quality at volume. Our Core Values(Your leadership must embody and model all seven they are the heartbeat of our kitchen.) 1. Focus on solutions.You operate from a place of calm problem-solving. You anticipate issues, improve systems, and keep production moving smoothly., 2. Embrace teamwork.You build a collaborative, supportive, and communicative kitchen culture where every team member feels respected and valued., 3. Passion for our product.You care deeply about food flavor, technique, plating standards, quality, and macro accuracy. Excellence matters to you., 4. Love of our craft: food, service & community.You see food as service. You take pride in feeding communities, partners, and guests with intention and care., 5. Integrity in all aspects of our day.You model honesty, reliability, transparency, and high standards. You never cut corners ever., 6. Respect for our kitchen: keep it clean, organized & friendly.You maintain and enforce a clean, safe, high-functioning culinary environment rooted in respect and professionalism., 7. Be coachable.You lead with humility. You give feedback clearly and kindly and you welcome feedback in return. Role OverviewThe Executive Chef oversees all culinary operations, menu execution, production systems, food safety, and kitchen leadership for a high-volume environment. You will manage a growing team, streamline workflows, maintain quality standards, and help elevate the next chapter of Fibonacci Food. You work closely with the founder and Operations Manager to seamlessly produce beautiful food that we can all be proud of. Key Responsibilities Leadership & Team Development • Lead, train, and mentor a team of prep cooks, line cooks, and sous chefs, • Foster a positive, accountable, solution-oriented culture, • Conduct performance reviews, coaching, and training plans, • Ensure daily adherence to core values, SOPs, and culinary standards Production & Quality Execution • Oversee high-volume batch cooking for catering, meal prep, and aviation clients, • Ensure macro accuracy, consistency, and plating quality, • Maintain tight control over yields, waste, and recipe compliance, • Oversee daily prep lists, production pacing, and line checks Menu & Systems Management • Refine and standardize recipes and SOPs, • Develop scalable systems that balance quality with efficiency, • Support R&D for new menus, seasonal dishes, and client-specific builds, • Ensure all recipes are documented, accurate, and repeatable Food Safety & Kitchen Operations • Enforce HACCP, FIFO, labeling, storage, and sanitation standards, • Ensure compliance with local health department regulations as well as 3rd party kitchen auditing firms., • Maintain equipment, schedule preventive maintenance, and manage vendors Administrative & Strategic Responsibilities • Collaborate with leadership on production scheduling and forecasting, • Manage food & labor cost targets, • Track inventory, oversee ordering, and work with procurement partners, • Participate in planning for growth, scaling, and new client opportunities Qualifications • 5+ years professional leadership experience (Executive Chef, CDC, or Sous in high-volume environment), • Experience with batch cooking, catering, commissary kitchens, or large-scale production, • Strong understanding of costing, yields, and operational efficiency, • Excellent leadership, communication, and conflict-resolution skills, • Ability to thrive in a dynamic, fast-growing environment, • Mastery of sanitation, safety, and commercial equipment, • Passion for culinary craft and commitment to consistency and quality Schedule & Compensation • Full-time role (primarily Monday Friday; some weekends depending on production cycles), • Competitive salary based on experience, • Paid time off, team meals, and leadership development opportunities, • A chance to grow with a company scaling rapidly in corporate, school, and aviation sectors Please include a cover letter and follow this link to complete an Aptive Index Assesment. You will not be considered for this position if you do not:

Job Description We are seeking a highly skilled and experienced Senior Systems Engineer / Controls Engineer to support the design, implementation, and maintenance of advanced control systems, including automation and specialized Leak Detection Systems (LDS). This critical role ensures the reliability, security, and performance of our control infrastructure, with a strong emphasis on Siemens PLC and SCADA technologies within the Oil & Gas industry. This position requires travel up to 50% of the time Key Duties and Functional Responsibilities The successful candidate will be responsible for the full lifecycle management of control systems, from development through field support. • System Management & Upgrades: Manage the development, configuration, maintenance, and upgrades of HCNA control systems, including automation and Leak Detection Systems (LDS)., • PLC Programming: Develop and troubleshoot robust applications using SIMATIC Step 7 (TIA Portal), leveraging expertise in Ladder Logic and Structured Text, with integration to SQL Server., • SCADA Programming: Design, implement, and maintain high-performance SCADA/HMI solutions using WinCC (versions 6.0–7.5 and TIA Portal)., • Functionality Enhancement: Develop new functionalities to enhance automation and LDS software based on customer and internal requirements., • Testing & Validation: Test new PLC hardware/software for compatibility with existing systems and execute PLDS site testing per approved procedures and checklists., • Technical Support: Provide high-level technical assistance, troubleshooting, maintenance, and upgrades for complex control system issues., • Field Support: Support essential field activities including commissioning, startup, customer training, acceptance testing, and detailed O&M manual development. Educatiion • Proven experience designing, programming, implementing, and troubleshooting industrial PLC and HMI systems, preferably in the Oil & Gas industry., • Expert, hands-on expertise with Siemens PLCs (S7-300, S7-400, S7-1200, S7-1500)., • Strong working knowledge of WinCC for SCADA/HMI development, including tag configuration, graphical interface design, reporting, trending, archiving, and scripting., • Proficiency in SIMATIC Step 7 (TIA Portal) for PLC programming., • Strong knowledge of Siemens networking architecture and communication protocols (MPI, Profibus, Profinet)., • Experience with network configurations (serial, TCP/IP, fiber optic converters)., • Familiarity with Siemens, GE Fanuc, and Allen-Bradley PLCs, with working knowledge of other platforms., • Knowledge of industrial protocols such as MODBUS, Data Highway, OPC, OPC UA, and integration using devices like Red Lion Protocol Converters., • Proficiency in scripting/programming for automation customization, including SQL Server integration., • Advanced certifications in automation technologies (highly desirable)., • Commissioning: Proven ability to commission systems from design through startup, including customer training and acceptance testing., • Communication: Strong verbal communication skills, especially when integrating HCNA systems with client pump control systems and translating complex technical concepts for non-technical stakeholders., • Documentation: Exceptional documentation skills, including the ability to write detailed technical reports (commissioning, annual, quarterly, and support visits)., • Problem-Solving: Excellent problem-solving abilities, attention to detail, and the ability to work independently or collaboratively within a team environment.Company DescriptionAt Hansa Consult of North America, LLC (HCNA), we provide US EPA Third-Party certified leak detection solutions for fuel hydrant and pipeline systems. As a privately held company based in New Hampshire, we provide state-of-the-art leak detection for the U.S. DOD and commercial aviation customers in the U.S. and around the globe.At Hansa Consult of North America, LLC (HCNA), we provide US EPA Third-Party certified leak detection solutions for fuel hydrant and pipeline systems. As a privately held company based in New Hampshire, we provide state-of-the-art leak detection for the U.S. DOD and commercial aviation customers in the U.S. and around the globe.

Job DescriptionVRX, Inc. offers proactive, big-picture thinking and planning, as well as detailed program, project, and asset management. Established in 2006 by longtime construction engineer Noelle Ibrahim, PE, VRX is a woman-owned professional services firm certified as a WBE and HUB. We provide turnkey services to the public and private sectors. Our specialties include client-focused program and asset management; construction management and inspection; civil engineering; bridge and structural design; utility engineering; and comprehensive environmental services. VRX is more than 180 people strong in offices across Texas, in Oklahoma and New York. Learn more at VRXglobal.com VRX is currently seeking a Construction Project Inspector with aviation runway, taxiway, airport operations, and/or related experience. Candidate should have 10- to 15 years of experience as a construction inspector for quality control and quality assurance on airfield runway and taxiway projects (i.e., concrete, drainage, grading and lighting, communicating with airport operation personnel, etc.) Current Open Positions: • Electrical Inspector – Medium Voltage, Underground (UG) and Vertical Construction, • Electrical Inspector – Low Voltage Building/Vertical Construction, • Plumbing Inspector – UG and Vertical Construction, • Mechanical Inspector – HVAC, Hydronic Piping, Building Automation Systems (BAS)Job Responsibilities:, • Conduct field inspections to verify conformance with approved contract documents and applicable codes, • Review contractor work for compliance with specifications, manufacturer instructions, and regulatory standards, • Coordinate daily activities with third-party inspectors and project stakeholders, including Airport Operations, Environmental teams, City inspectors, and Airport personnel, • Document deficiencies and communicate findings to the Contractor and CDS inspectors in a timely manner, • Support Construction Managers verifying installed quantities for Pay Applications, • Maintain accurate daily inspection reports detailing work reviewed and observations made, • Participate in change management processes and assist in schedule evaluations, • Navigate and utilize project documentation including design drawings, specifications, Design Standards Manual, and contract terms, • Minimum of 10 years of experience in the construction industry, • Demonstrated aviation-related construction experience, including work on taxiways, runways, terminals, and underground utilities, • Ability to pass a TSA criminal history background check, • In-depth knowledge of environmental codes and regulatory requirements, • Familiarity with discipline-specific codes and standards (e.g., NEC, IMC, IPC, SMACNA, IBC, IEEE), • Ability to interpret and coordinate with third-party inspection reports, • Strong understanding of contract documents, technical specifications, and design standards, • Valid Driver’s License VRX, Inc. is an award-winning woman owned civil engineering firm that has been in business since 2006. We offer a comprehensive benefit package including Health, Dental, Vision and Life insurance, as well as a Health Saving Account option and a 401k plan with company matching. NOTICE TO THIRD PARTY AGENCIES: Please note that VRX, Inc. does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, VRX, Inc. will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, VRX, Inc. explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of VRX, Inc VRX, Inc. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.” Powered by JazzHR iUG3XeJ9mx

Job DescriptionAt Skyways, we are building a new form of air transportation—what some call the flying car. Backed by fresh funding and a major STRATFI contract from the U.S. Air Force, we’re uniquely positioned to lead the next wave of aviation innovation. Our fully autonomous unmanned aerial vehicles (UAVs) represent a breakthrough opportunity to move goods—and soon, people—in ways that are faster, safer, and more efficient than ever before. Unlike anyone else in the industry, our strategy blends rapid iteration with real-world deployment, and it’s already paying off. Skyways is a fast-growing startup based in Austin, TX, supported by top Silicon Valley investors including Y Combinator. Though we’re early-stage, our vehicles are already in production and in the hands of paying commercial customers (see here and here). With robust financial backing and government partnerships accelerating our momentum, there’s never been a better time to join us and help build the future of transportation! The Opportunity As a Software Engineer on the Customer Success team, your work will directly ensure that our customers succeed with Skyways’ aircraft. You will build, maintain, and optimize the software that powers flight control, autonomous navigation, and operator applications. This is not an isolated coding role. You will spend time observing and working alongside customers in the field to understand their operations, challenges, and workflows. The feedback you collect will guide your software design decisions and help create solutions that are intuitive, reliable, and impactful. You will have the chance to see your code in action in real missions, troubleshooting, iterating, and improving the systems that our customers rely on. Travel is part of the job, allowing you to experience firsthand how Skyways aircraft are deployed in commercial and government environments.What You’ll Do: • Develop and maintain flight control, autonomous navigation, and mission execution software with the customer experience in mind., • Build operator facing mobile and desktop applications that simplify complex UAV operations., • Partner directly with customers to understand their workflows and operational needs., • Debug and optimize software in both simulated and live flight environments., • Travel to customer sites to observe operations, provide technical support, and collect feedback., • Collaborate closely with engineering, GNC, and hardware teams to integrate solutions across the stack.What You Bring:, • 5+ years of software engineering experience with C++, Python, Javascript or related languages., • Strong problem solving skills with real time, safety critical systems., • Ability to engage directly with customers and translate operational challenges into software solutions., • Clear communication skills and a collaborative mindset., • Excitement about aviation, drones, or autonomy., • Willingness to travel regularly to customer sites.Bonus Points:, • Experience with Ardupilot, PX4, or MavLink., • Prior customer facing technical role.

Job DescriptionAt Skyways, we are building a new form of air transportation—what some call the flying car. Backed by fresh funding and a major STRATFI contract from the U.S. Air Force, we’re uniquely positioned to lead the next wave of aviation innovation. Our fully autonomous unmanned aerial vehicles (UAVs) represent a breakthrough opportunity to move goods—and soon, people—in ways that are faster, safer, and more efficient than ever before. Unlike anyone else in the industry, our strategy blends rapid iteration with real-world deployment, and it’s already paying off. Skyways is a fast-growing startup based in Austin, TX, supported by top Silicon Valley investors including Y Combinator. Though we’re early-stage, our vehicles are already in production and in the hands of paying commercial customers (see here and here). With robust financial backing and government partnerships accelerating our momentum, there’s never been a better time to join us and help build the future of transportation! The Opportunity Skyways is expanding rapidly, and we are looking for a Manufacturing Engineer to play a critical role in scaling our autonomous aircraft production. This is a high-impact position where you will be instrumental in developing, optimizing, and implementing manufacturing processes. Your work will directly enable the seamless transition of our innovative prototypes into high-volume, high-quality production.What You'll Do: • Collaborate with the engineering and manufacturing teams to develop and optimize manufacturing processes, tooling, and fixtures for scalable and efficient production., • Provide design for manufacturing (DFM) feedback to engineering, ensuring cost-effective and production-ready designs for high-volume output., • Partner with engineering and manufacturing teams to implement lean principles, advanced automation solutions, and continuous improvement initiatives, driving efficiency and quality across all production stages., • Collaborate with engineering, supply chain, and quality to resolve issues., • Document processes, conduct root cause analysis, and select equipment., • Help manage interactions with Contract ManufacturersWhat You'll Bring:, • 4+ years experience successfully scaling products from prototype to high-volume production., • Strong foundational knowledge of various manufacturing processes, with particular expertise in composites., • Proficiency in CAD software and a deep understanding of Design for Manufacturability (DFM) and Design for Assembly (DFA) principles., • Exceptional problem-solving abilities, clear and concise communication skills, and robust project management expertise., • Experience with ERP or MRP systems. For production readiness, we will be getting everything set up so that the ERP system can track aircraft builds, inventory, quality issues, individual parts, and several other thingsBonus Points If You Have:, • Direct experience scaling products within the demanding aerospace industry., • Hands-on experience with automated manufacturing systems and robotics., • Comprehensive knowledge of aerospace quality standards (e.g., AS9100) and certification processes.

Job DescriptionSkyGrid, a Boeing Company, exists to open the sky for autonomous flight. Based in Austin, Texas, SkyGrid builds ground based high-assurance third-party services to enable the safe operations and airspace integration of highly automated and autonomous aircraft. SkyGrid also acts as a key operational nexus for advanced air mobility, integrating and managing data, infrastructure, access, and traffic to support seamless and efficient air traffic services. The SkyGrid team is seeking a talented Airspace Integration Engineer with a background in developing aviation human-machine systems interfaces to support SkyGrid’s mission to enable the airspace integration of emerging aircraft operations worldwide. This role will play a critical part in developing human-systems interfaces for ground-based automation systems that will be used by aircraft operators and air traffic controllers to support high-density, low-altitude operations in airspaces worldwide. This is a hybrid position based in Austin, TX and will report to the Airspace Integration Manager within SkyGrid’s Research and Development (R&D) organization. Performance Objectives: • Contribute to the design of novel user interfaces for SkyGrid’s operator-facing services., • Assess, track, and document the Human Readiness Level (HRL) of in-development SkyGrid products., • Collaborate with other Human Factors and User Experience specialists to translate customer needs into actionable work items that drive user-interface development., • Coordinate human-in-the-loop test plans for SkyGrid’s ground-based automation systems supporting the airspace integration of Advanced Air Mobility (AAM)., • Identify and document design philosophy for novel user interfaces based on human factors principles. Responsibilities:, • Collaborate with other Human Factors and User Experience engineers at SkyGrid to design innovative user interfaces for Advanced Air Mobility (AAM) traffic management systems., • Create low-fidelity wireframes to explore and validate workflows, information hierarchy, and interaction patterns early in the design process., • Create high-fidelity UI designs that accurately represent the final visual design for implementation in software., • Coordinate human-in-the-loop tests for ground-based automation systems supporting the airspace integration of AAM., • Monitor and analyze trends in the design of user interfaces for AAM traffic management tools. Qualifications:, • Bachelor's degree or higher in Human Factors, UI/UX Design, Aerospace Engineering, or related field., • Minimum of 6 years of related experience in aerospace/flight operations., • Experience designing user interfaces for aviation applications., • Working knowledge of FAA and MIL-STD human factors design standards., • Proficiency with industry-standard design tools (e.g., Figma)., • Familiarity with UX design systems., • Experience conducting user research and task analyses., • Experience evaluating human performance and user experience using both qualitative and quantitative methods., • Familiarity with user-facing systems used for air traffic management., • Experience designing user interfaces for certified aviation products, such as flight deck displays and crew alerting systems. Join Our Team and Enjoy Exceptional Benefits:, • Comprehensive Health Coverage from Day One: Enjoy immediate access to medical, dental, and vision insurance, including HSA and FSA options., • Generous Retirement Contributions: Benefit from an automatic company 401k contribution program, with no match required, plus an additional company matching program to boost your retirement savings., • Calm Annual Membership: Prioritize your mental health with complimentary access to mindfulness and meditation resources., • Discounted ClassPass Membership: Stay active and healthy with access to thousands of fitness studios and gyms nationwide., • Investment in Your Growth: Receive an annual stipend for learning and development to support your continuous education and skill development, • Engaging Team Activities: Participate in quarterly team-building events and celebrations organized by our dedicated culture committee.

Job DescriptionSkyGrid, a Boeing Company, exists to open the sky for autonomous flight. Based in Austin, Texas, SkyGrid builds ground based high-assurance third-party services to enable the safe operations and airspace integration of highly automated and autonomous aircraft. SkyGrid also acts as a key operational nexus for advanced air mobility, integrating and managing data, infrastructure, access, and traffic to support seamless and efficient air traffic services. The SkyGrid team is looking for an experienced Cybersecurity Manager, preferably with a background in the Aviation industry, to effectively apply civilian aerospace cybersecurity standards through the implementation of SkyGrid cybersecurity processes and policies. This individual will oversee efforts in the development, implementation, and sustainment levels of product security and resiliency throughout the product requirements including design, build, test, production, operations, and support lifecycle. Performance Objectives: • Build and scale a security program from the ground up in a startup environment., • Lead SkyGrid through ISO 27001 and SOC 2 Type II certification efforts., • Implement and maintain security controls aligned with DO-326A, aviation cybersecurity frameworks, and industry best practices., • Support cybersecurity requirements for Entry Into Service (EIS), including readiness, documentation, and compliance alignment., • Strengthen the organization’s security posture through strategic planning and hands-on execution., • Deliver a clear security roadmap covering risk management, incident response, and continuous improvement. Responsibilities:, • Develop and maintain company-wide security policies, standards, and procedures., • Build and manage core security operations (incident response, IAM, vulnerability management, secure SDLC, vendor/security risk management)., • Partner with Engineering, Product, and IT to embed security into daily operations and across the development lifecycle., • Manage external audits, customer security reviews, and regulatory/security requirements., • Support EIS-related cybersecurity work, ensuring security deliverables, documentation, and compliance artifacts meet aviation and regulatory expectations., • Select, deploy, and operate security tools for SaaS and cloud-native environments., • Communicate risk, posture, and key metrics to executive leadership. Qualifications:, • B.S. degree in Computer Science, Engineering, IT, Cybersecurity, or related field., • 10+ years of cybersecurity experience, including leadership or management roles., • Experience building a security program in a startup or high-growth company., • Strong background in SaaS security, cloud platforms, and DevSecOps practices., • Proven success leading ISO 27001 and SOC 2 Type II certification efforts., • Familiarity with DO-326A and aviation cybersecurity frameworks., • Experience applying NIST CSF/800-53, 800-171, OWASP, CIS Controls, or similar security frameworks., • Ability to support cybersecurity deliverables for EIS processes., • Hands-on expertise with IAM, incident response, vulnerability management, and secure SDLC., • Strong communication and cross-functional collaboration skills. Preferred Experience:, • Master’s degree in a relevant field., • Professional certifications such as CISSP, CISM, CCSP, or ISO Lead Implementer/Auditor., • Experience in commercial/government SaaS, aviation, aerospace, mobility, or other regulated industries., • Background managing enterprise customer security assessments and RFPs. Join Our Team and Enjoy Exceptional Benefits:, • Comprehensive Health Coverage from Day One: Enjoy immediate access to medical, dental, and vision insurance, including HSA and FSA options., • Generous Retirement Contributions: Benefit from an automatic company 401k contribution program, with no match required, plus an additional company matching program to boost your retirement savings., • Calm Annual Membership: Prioritize your mental health with complimentary access to mindfulness and meditation resources., • Discounted ClassPass Membership: Stay active and healthy with access to thousands of fitness studios and gyms nationwide., • Investment in Your Growth: Receive an annual stipend for learning and development to support your continuous education and skill development, • Engaging Team Activities: Participate in quarterly team-building events and celebrations organized by our dedicated culture committee.

Job Description Keville Enterprises, Inc., a Construction Management Consulting and Inspection firm, is seeking a full-time Lead Terminal/Civil Aviation Cost Estimator for Austin-Bergstrom International Airport. Keville Enterprises, Inc. has been serving the Construction Management Industry since 1991. A WBE/DBE Certified Construction management and inspection firm, Keville specializes in providing a full spectrum of construction management and support services as an owner's representative on public and private projects. Today Keville is one of the largest and most successful woman-owned CM firms in the nation committed to 100% client satisfaction and continuous development and improvement of our employees, products, and services. Benefits: Keville offers a competitive wage and a comprehensive benefits package to include Medical, Dental, Vision and Life Insurance, 401k Profit Sharing Plan, FSA/Dependent Care accounts, paid time off for Vacation, Sick and Holidays. We support ample industry related training and a broad range of career opportunities. Duties and Responsibilities The Lead Cost Estimator will be required to develop detailed cost estimates for a variety of projects including highway, bridge, tunnel, airport, building construction, building renovation and other projects. Types of estimates will include preliminary conceptual estimates, estimates at various stages of design, change order estimates, claims estimates, and estimates to analyze "what if" scenarios. Estimator will also be required to review and comment on cost estimates developed by others, and write a variety of technical reports. Estimator will interface with construction schedulers to ensure that estimates and schedules are coordinated and integrated. Estimator will also be required to interface with project owners, designers, engineers, material and equipment suppliers, and construction contractors. Estimator will be required to participate in project meetings, negotiations, risk analysis studies, and value engineering studies. Qualifications • Must have at least 10 years of aviation cost estimating experience on vertical or civil projects, • Must have the following aviation experience: Terminal Construction, baggage handling systems, apron rehabilitation, taxiway improvements, airfield electrical and utility infrastructure, • Must be highly proficient in the use of laptop and desktop computers, • Must have demonstrated exceptional proficiency in the use of Microsoft Excel, • Experience in HCSS Heavy Bid Software is strongly preferred, • Experience with a digitizer or on-screen takeoff software is strongly preferred, • CPM Scheduling experience is strongly preferred, • Must have a thorough understanding of the construction process, • Must have experience in reading construction plans and specifications and developing the crews, equipment, and production rates required to build a project, • Must have a positive attitude, calm demeanor, friendly personality and work well with others, • Must be fluent in the English language, have excellent writing skills, and have excellent oral communication skills, • Normal working hours will be during the daytime, but may vary depending on project demands, • Overtime work may be required based on project deadlines, • Prolonged periods of time sitting at a desk and working on a computer Keville Enterprises, Inc. is an Affirmative Action/Equal Opportunity Employer-Vet/Disability Background checks required. Pre-employment (post-offer) Job Posted by ApplicantPro

Job DescriptionSkyGrid, a Boeing Company, exists to open the sky for autonomous flight. Based in Austin, Texas, SkyGrid builds ground based high-assurance third-party services to enable the safe operations and airspace integration of highly automated and autonomous aircraft. SkyGrid also acts as a key operational nexus for advanced air mobility, integrating and managing data, infrastructure, access, and traffic to support seamless and efficient air traffic services. SkyGrid is seeking an Autonomy Engineer II to help develop cutting-edge solutions for airspace automation. This role will focus on designing and implementing autonomy functions to enable safe, scalable Advanced Air Mobility (AAM) operations and enhance Air Traffic Management (ATM). This position will contribute to refining SkyGrid’s autonomy architecture, translating high-level technology concepts into working prototypes to support real-time decision-making, conflict detection and resolution (CD&R), collaborative traffic management, and adaptive mission planning in complex airspace environments. This is a hybrid position based in Austin, TX, reporting to the Principal Airspace Automation Manager. Performance Objectives: • Utilize product design requirements and operational use-cases to develop functional architecture and preliminary algorithm., • Progress service to Technical Readiness Level (TRL) 2 (conceptual development) and TRL 3 (prototype)., • Conduct unit and integration testing (TRL 4/5) and document a minimum viable product version of the service., • Enhance the service capability and work with software engineers to transition service to high fidelity production environments (TRL 6/7)., • Update concepts, use cases, and engineering artifacts based on technology maturation. Responsibilities:, • Lead the end-to-end development of autonomous air traffic management functions—from concept to prototype., • Collaborate with product and systems engineers to define functional and performance requirements for autonomy-based functions., • Collaborate with software engineers to design and develop integration interfaces within the overarching product codebase., • Specify and execute Software-in-the-Loop (SIL) testing to validate autonomy functions and generate relevant test result artifacts., • Drive innovation by brainstorming and developing novel autonomy solutions, contributing to research and development efforts in autonomous airspace management., • Foster collaboration by engaging with external organizations, research institutions, and industry partners, as well as supporting technical publications and conference contributions. Qualifications:, • B.S. in Computer Science, Aerospace Engineering, Robotics, or related field., • Minimum of 3 years of autonomy engineering experience, with a strong focus on concept-to-prototype development., • Work experience in algorithm development or R&D for autonomous systems., • Programming Languages: Python, C/C++., • Familiarity with R&D of algorithms and functions that enable autonomous systems., • Development, integration, and testing in SIL simulation environment., • Experience in air traffic management research and development., • Experience with mathematical formulation of vehicle kinematics/dynamics, route planning, optimization, conflict detection and resolution algorithms, • Translation of advanced algorithms and mathematical concepts into clean, working code., • define the problem statement, • conduct state of the art analysis, • analyze problems that are not clearly defined, • identify possible solutions, • adapt solution scope to fit timelines Preferred Qualifications:, • M.S. or Ph.D. in Computer Science, Aerospace Engineering, Robotics, or related field., • Familiarity with aviation and air traffic management operations., • Experience in R&D and functional development in one or more of the following areas:, • Transportation networks, • Tactical or strategic conflict detection and resolution for air vehicles, • Flight Planning, • Machine Learning, • Resource optimization, • Advanced Air Mobility, • Bayesian or probabilistic modelling, • Comprehensive Health Coverage from Day One: Enjoy immediate access to medical, dental, and vision insurance, including HSA and FSA options., • Generous Retirement Contributions: Benefit from an automatic company 401k contribution program, with no match required, plus an additional company matching program to boost your retirement savings., • Calm Annual Membership: Prioritize your mental health with complimentary access to mindfulness and meditation resources., • Discounted ClassPass Membership: Stay active and healthy with access to thousands of fitness studios and gyms nationwide., • Investment in Your Growth: Receive an annual stipend for learning and development to support your continuous education and skill development, • Engaging Team Activities: Participate in quarterly team-building events and celebrations organized by our dedicated culture committee.

Job Description A&P Mechanic – Piston Aircraft Location: Chesterfield, MO Employment Type: Full-Time About Client We are seeking a skilled and detail-oriented Airframe & Powerplant Mechanic with experience in piston-powered aircraft maintenance. This role involves working on general aviation aircraft, including Cirrus and other piston platforms, to ensure safe and reliable operation. Compensation & Benefits * Base Salary: $25 – $33 per hour (depending on experience) * Shift: Day shift (with flexibility depending on operational needs) * Benefits Package: Comprehensive benefits package available (details provided during hiring process) Job Summary The A&P Mechanic – Piston Aircraft will perform inspections, troubleshooting, and repairs on piston-powered aircraft. This includes ensuring compliance with FAA regulations, maintaining accurate documentation, and collaborating with team members to deliver safe, airworthy aircraft. Key Responsibilities • Conduct airframe and powerplant inspections in accordance with FAA regulations and manufacturer requirements., • Perform troubleshooting, repairs, and routine maintenance on piston engines and related systems., • Maintain and service aircraft components, including electrical, hydraulic, fuel, and mechanical systems., • Accurately complete logbook entries, work orders, and required FAA documentation., • Ensure compliance with safety protocols, quality standards, and regulatory guidelines., • Valid FAA A&P Certificate required., • Experience with piston engine aircraft maintenance.Ideal Qualifications, • Cirrus aircraft experience preferred., • Strong understanding of FAA regulations and manufacturer maintenance manuals., • Ability to read and interpret blueprints, schematics, and technical data., • Strong troubleshooting and problem-solving skills.

Job DescriptionAt Skyways, we are building a new form of air transportation—what some call the flying car. Backed by fresh funding and a major STRATFI contract from the U.S. Air Force, we’re uniquely positioned to lead the next wave of aviation innovation. Our fully autonomous unmanned aerial vehicles (UAVs) represent a breakthrough opportunity to move goods—and soon, people—in ways that are faster, safer, and more efficient than ever before. Unlike anyone else in the industry, our strategy blends rapid iteration with real-world deployment, and it’s already paying off. Skyways is a fast-growing startup based in Austin, TX, supported by top Silicon Valley investors including Y Combinator. Though we’re early-stage, our vehicles are already in production and in the hands of paying commercial customers (see here and here). With robust financial backing and government partnerships accelerating our momentum, there’s never been a better time to join us and help build the future of transportation! The Opportunity We are hiring a Head of Mechanical Engineer to take a key role in the design and development of Skyways’ aircraft. You will lead important projects, mentor other engineers, and drive mechanical systems from concept through flight testing and production. This is a chance to combine technical depth with leadership in a fast-moving environment where your work makes it into the air quickly.What You'll Do: • Contribute to the design, analysis, and integration of aircraft structures, mechanisms, and composite systems., • Lead projects through the full development cycle: CAD, FEA, prototyping, testing, and production., • Balance performance, weight, cost, and manufacturability in every design decision., • Mentor and support other engineers while staying hands-on with design, prototyping, and troubleshooting., • Collaborate closely with aero, GNC, and manufacturing teammates to ensure designs perform in real-world flight., • Build and test prototypes and see your work take flight!What You Bring:, • 8+ years of mechanical engineering experience (aerospace preferred)., • Degree in Mechanical or Aerospace Engineering., • Experience leading projects and small teams., • Strong CAD (SolidWorks preferred) and FEA (Ansys, Nastran) skills., • Deep knowledge of aerospace manufacturing processes, materials, and GD&T., • Experience working with outside vendors and taking designs into production., • Startup mindset: resourceful, resilient, able to take a project from vague requirements to a flying aircraft.Bonus Points:, • You are a maker and doer! Show us your projects!, • Composite design and analysis experience., • Hands-on shop skills (CNC, CAM, composites, 3D printing, etc).

Job DescriptionAt Skyways, we are building a new form of air transportation—what some call the flying car. Backed by fresh funding and a major STRATFI contract from the U.S. Air Force, we’re uniquely positioned to lead the next wave of aviation innovation. Our fully autonomous unmanned aerial vehicles (UAVs) represent a breakthrough opportunity to move goods—and soon, people—in ways that are faster, safer, and more efficient than ever before. Unlike anyone else in the industry, our strategy blends rapid iteration with real-world deployment, and it’s already paying off. Skyways is a fast-growing startup based in Austin, TX, supported by top Silicon Valley investors including Y Combinator. Though we’re early-stage, our vehicles are already in production and in the hands of paying commercial customers (see here and here). With robust financial backing and government partnerships accelerating our momentum, there’s never been a better time to join us and help build the future of transportation! The Opportunity Skyways is growing, and we're looking for a Head of Flight. This is a critical leadership role that will define, lead, and scale all flight operations and flight testing. You'll ensure safety, regulatory compliance, and operational standards for both internal and customer flights, providing strategic oversight as we prepare for global scale.What You'll Do: • Provide strategic and operational oversight for all flight activities., • Serve as the primary liaison between Skyways, our customers, regulatory bodies, and military stakeholders., • Coordinate across Skyways teams to align on all flight-related initiatives., • Lead, mentor, and develop the flight team., • Oversee test scheduling, aircraft planning, and personnel management., • Gain deep knowledge of Skyways aircraft to inform flight ops.What You'll Bring:, • Significant experience (10+ years implied) leading flight operations and/or flight testing in an aviation environment., • Deep understanding of aviation principles and flight dynamics, demonstrated through relevant experience and/or certifications., • Proven experience engaging with and navigating aviation regulatory bodies., • Demonstrated ability to build, mentor, and manage high-performing teams., • Strong, independent problem-solving capabilities., • A genuine passion for hands-on work and continuous learning within the aviation field.Bonus Points If You've:, • Held high-level management positions at cutting-edge aviation companies., • Experience in the space, airlines, or automotive industries, especially leading complex engineering teams., • A background as a military pilot transitioning to the private sector., • Experience with organizations like United Airlines (organizational emphasis) or those leading flight at advanced composite manufacturers.Benefits at Skyways:, • Health coverage: medical, dental, and vision insurance, • Time to recharge: paid time off and holidays, • Planning ahead: 401(k) retirement savings, • Peace of mind: life insurance coverage, • Shared success: stock options for every employee

Job DescriptionAt Skyways, we are building a new form of air transportation—what some call the flying car. Backed by fresh funding and a major STRATFI contract from the U.S. Air Force, we’re uniquely positioned to lead the next wave of aviation innovation. Our fully autonomous unmanned aerial vehicles (UAVs) represent a breakthrough opportunity to move goods—and soon, people—in ways that are faster, safer, and more efficient than ever before. Unlike anyone else in the industry, our strategy blends rapid iteration with real-world deployment, and it’s already paying off. Skyways is a fast-growing startup based in Austin, TX, supported by top Silicon Valley investors including Y Combinator. Though we’re early-stage, our vehicles are already in production and in the hands of paying commercial customers (see here and here). With robust financial backing and government partnerships accelerating our momentum, there’s never been a better time to join us and help build the future of transportation! The Opportunity The QA Manager will build Skyways’ quality foundation from the ground up. This is not a policy role. It is an opportunity to design and lead how quality is embedded into everything we design, build, and fly. You will be the first person in this function, owning quality across the full lifecycle from receiving and development through production and delivery. You will create the systems and processes that make quality inseparable from how Skyways operates, ensuring every part, assembly, and aircraft meets the highest standards before it leaves the floor. This role is for someone with an entrepreneurial spirit who thrives in new territory. You will jump into the unknown, build structure where there is none, and make quality a core advantage for Skyways as we scale.What You Will Do: • Build and lead Skyways’ Quality Assurance function from the ground up., • Create and implement a complete Quality Management System covering receiving, development, production, and final delivery., • Establish clear inspection and documentation processes at every step, from parts arriving to aircraft shipping out., • Partner with production and engineering to define QA checkpoints, resolve issues, and drive root cause improvements., • Manage supplier quality and incoming inspection programs., • Ensure documentation, traceability, and accountability through every build., • Prepare the company for FAA, DoD, and ISO audits., • Build a culture where quality and speed coexist.What You Will Bring:, • 8+ years of experience in quality assurance or quality engineering in aerospace, defense, or automotive manufacturing., • Proven experience setting up and scaling QMS processes in a production environment., • Deep understanding of AS9100, ISO 9001, or equivalent frameworks., • Hands on approach to solving production and supplier issues., • Ability to collaborate across engineering, manufacturing, and flight teams., • Strong documentation habits and attention to detail., • Passion for aviation and for building real systems that fly., • Must be a U.S. Citizen or Permanent Resident due to ITAR regulations.Bonus Points If You Have:, • Experience bringing new aircraft or complex systems into production., • Familiarity with UAV operations, flight testing, or airworthiness certification.

Job DescriptionSaronic Technologies is a leader in revolutionizing defense autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations for the Department of Defense (DoD) through autonomous and intelligent platforms. Job Summary We are seeking a Senior Manager, Repair Center Operations to lead global sustainment and depot operations for Saronic’s fleet of autonomous vessels. This role will be responsible for maximizing vessel uptime, overseeing depot-level repair schedules, managing site-level leaders across global locations, and ensuring consistent service delivery as our company scales. The Senior Manager will also own training program development, including recurring training and new hire onboarding, to ensure globally consistent repair center operations. The ideal candidate is a technical leader turned manager - someone who began their career in mechanical repair, shipbuilding, MRO, or depot-level maintenance, and has since progressed into senior management. They bring 10+ years of leadership experience in maritime, aviation, or defense sustainment, with a strong understanding of DoD sustainment cycles and the ability to balance tactical repair execution with strategic depot growth. This role reports to the Director of Mission Support.Responsibilities • Global Depot Operations Leadership, • Manage managers at Saronic’s repair centers worldwide, ensuring consistent depot performance., • Oversee proactive repair scheduling, depot-level maintenance, and lifecycle sustainment planning., • Ensure site-level leaders are trained, resourced, and aligned to operational standards., • Fleet Availability & Uptime, • Maximize vessel readiness by driving proactive repair and overhaul strategies., • Track KPIs tied to uptime, turnaround times, and depot throughput., • Develop and implement processes to minimize downtime and increase availability., • Training & Workforce Development, • Design and implement global training programs for repair center staff., • Standardize service delivery through recurring training, new hire onboarding, and skills development., • Ensure training adapts to evolving product lines and operational needs., • Process & Continuous Improvement, • Establish scalable, standardized processes across repair centers worldwide., • Apply Lean, Six Sigma, or similar methodologies to reduce turnaround times and improve quality., • Partner with Engineering and Supply Chain teams to enhance design-for-maintainability and reduce repair demand., • Leadership & Growth, • Provide leadership to depot managers, setting clear performance expectations and development goals., • Develop long-term strategies for global depot expansion, including build vs. outsource decisions., • Deliver executive-level reporting on sustainment performance, repair costs, and customer outcomes.Qualifications, • Education & Experience, • Master’s degree preferred with Bachelor’s degree required in a relevant field such as: Engineering (Mechanical, Electrical, Systems), Naval Architecture, Marine Engineering, Aerospace or Aviation Maintenance, Operations or other technical fields, • 10+ years of progressive leadership experience in maritime or aviation repair, MRO, depot-level maintenance, or shipbuilding., • Career progression from mechanical/repair background into senior management roles., • Experience leading multi-site repair or depot operations strongly preferred., • Familiarity with DoD sustainment cycles; prior active duty or defense sustainment program management experience strongly preferred., • MBA or certifications such as PMP, Lean Six Sigma, IAM, or ISO 55000 preferred., • Technical & Functional Skills, • Strong expertise in depot-level maintenance, repair planning, and lifecycle sustainment., • Experience with ERP/MRO systems and scheduling tools., • Ability to analyze repair data, identify trends, and implement corrective actions., • Knowledge of global logistics and depot scalability challenges., • Leadership & Soft Skills, • Proven ability to manage leaders across geographically dispersed sites., • Strong communication and customer-facing skills when engaging on repair matters., • Skilled at balancing near-term operational execution with long-term sustainment strategy., • Commitment to building a culture of consistency, accountability, and operational excellence., • Additional Details, • 40% travel to global depot and customer sites.Physical Demands, • Ability to certify as “fit for work” by demonstrating ability to swim and tread water, • Frequently and repetitively, lift, push and carry up to 75 lbs., • Will be exposed to marine environments, including sun, wind, rain, cold, and saltwater spray, often for extended periods, • Must be able to operate in daylight, low-light, and night conditions using marine navigation systems and visual cues, • Ability to perform physically demanding work for extended periods of time, up to 12 hours/day, • The ability to carry 20 lbs. up and down stairs Benefits, • Medical Insurance: Comprehensive health insurance plans covering a range of services, • Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care, • Saronic pays 100% of the premium for employees and 80% for dependents, • Time Off: Generous PTO and Holidays, • Parental Leave: Paid maternity and paternity leave to support new parents, • Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses, • Retirement Plan: 401(k) plan, • Stock Options: Equity options to give employees a stake in the company’s success, • Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage

Job Description Hallmark Aviation is seeking a professional Airline Business Manager for a prestigious airline. The Business Manager leads the airline operational and administrative processes while coordinating with the airline client/station manager to meet high quality standards. Airline Business Manager Summary: • Maximize airline account revenues and profitability; Control the budget for labor costs and allocation, • Ensure that airline account operates according to schedule and service level agreements, • Oversee the long-term analysis of manpower needs, groom potential leaders, • Manage, input, and update employee attendance records and ensure appropriate shift coverage using Attendance Enterprise timekeeping system, • Develop and cultivates strong customer relations/retention, • Support, hire, train their airline account team; coordinates between Human Resources, Training and Quality Assurance department to ensure a compliant and pleasant work environment, • Provide hands-on supervision of the staff and delegate workload, • Provide direct customer relations support, • Ensure cross training of staff members and monitor mandatory training, • Administer performance recognition and reward program(s), • Carry out disciplinary action and motivational activities when needed, • Process promotion, demotion and termination paperwork, • Enforce company policies and procedures (including safety, security, and uniform & grooming standards) Preferred Skills and Experience o Proven LEADERSHIP abilities and ORGANIZATIONAL skills o Familiarity with the Aviation industry (or B2B crack): Ticketing experience, passenger service experience o PC basics (Outlook, Microsoft Word, PowerPoint, excel, Adobe PDF, etc.) o Excellent interpersonal, coaching and counseling skills o Self-driven focus on Customer and Client satisfaction o Ability to excel under pressure of meeting extreme deadlines o Able to communicate effectively, both verbally and in writing o Experienced in planning a roster and monitoring work schedules o Able to solve daily problems and make quick decisions within the operation o Able to work varied hours, and flexible to travel if needed. Apply online today! Essential Requirements: PREVIOUS AIRLINE EXPERIENCE At least 18yrs old, with a High School Diploma or G.E.D. English proficient, other languages may be required Basic Math Skills: Adding, Subtracting, Division, and Multiplying Computer Literate Able to stand, bend, squat, reach, grasp and pick up items; occasional lifting up to 70lbs Reading & comprehension of reference materials, instructions, policies & procedures Basic Requirements: Valid US work authorization Professional demeanor and exceptional presentation Flexible schedule & availability Background Check, Fingerprinting required Drug Screen required on day of hire Job Location Austin, Texas, United States Position Type Full-Time/Regular Required Training Selected candidates will be required to attend and successfully complete management and airline product training Shift TBD. Must have flexible availability and reliable transportation Schedule [i.e. M/T/W/F/Sun or TBA] To be discussed at time of interview Language English Required Salary/Benefits To be discussed at time of interview Company DescriptionLeading above the wing ground handling company with over 32 years in the BusinessLeading above the wing ground handling company with over 32 years in the Business

Job DescriptionDescriptionAre you an elite sales professional looking to elevate your career in the competitive world of private aviation? Silver Air Private Jets is expanding, and we're seeking top-tier salespeople to join our dynamic team. If you're driven to build lasting relationships with high-net-worth clients, sell an industry-leading product, and be part of a company that values innovation and excellence, we want you onboard. Why Silver Air? At Silver Air, Private Jet Advisors are at the heart of our mission. We don’t just offer flights; we offer an unparalleled luxury experience. Our Flight Club, an invitation-only membership program, provides premium clients with seamless, hassle-free access to private jet services. As a PJA, you’ll have the opportunity to sell this exclusive membership and help clients streamline their private jet travel like never before. Our aircraft management services stand out in the market for their transparency, efficiency, and customer-first approach, offering you the chance to sell a product that truly differentiates itself. With industry-leading certifications from top independent auditing firms, Silver Air stands as a beacon of safety, trust, and premium service in private aviation. What We Offer • Flight Club Membership Sales: Sell an exclusive product that simplifies client travel and enhances their overall private jet experience. You'll be representing a brand that offers unparalleled service and benefits to its clients., • Aircraft Management Solutions: Sell a best-in-class aircraft management program designed to provide transparency, security, and efficiency for jet owners. Clients appreciate our approach, and you'll appreciate the opportunity to represent a truly competitive product in the marketplace., • Top Commissions & Earning Potential: We offer a highly competitive commission structure, rewarding your performance with industry-leading compensation. Your success directly translates into your financial rewards., • Exclusive Access to Elite Networks: Our strategic partnerships with luxury brands and high-end clubs open doors for you to build connections with affluent clientele and increase your reach in the market., • Work-Life Flexibility: Whether remote, hybrid, or in-office, we offer flexibility to balance your professional and personal life, ensuring you can thrive both in and outside of work., • Strong understanding of business relationships; excellent personal and intuitive skills to develop and maintain these relationships., • Work with High Net Worth individuals looking to utilize private aviation (High-end automotive dealers, wealth management, real estate, etc)., • Be equipped with 2-5 years of hands-on Part 135 sales and sales operations experience, with proven expertise in developing and closing new retail sales opportunities to grow a successful book of business.WHAT YOU’LL LEAD: Your priorities are:, • Develop, implement and refine an effective charter marketing strategy by monitoring industry trends., • Partner with the executives to formulate, coordinate, and promote charter services., • Promote and sell charter block-time products., • Unlimited PTO for full-time Team Members, • Fully paid health insurance coverage for you and your family (full-time Team Members), • Generous personal development and employee assistance programs, • Top-of-the-line equipment (Apple, Microsoft, Dell, Lenovo, etc.), • Flexible leadership team, • You have the flexibility to make your own hours while earning commissions., • Pet insurance, • 401k/Roth with a 5% match on day one of hire., • HSA, FSA, and dependent care savings accounts

Job DescriptionJob Title: Integration Technician Job Description Are you experienced in assembly, troubleshooting, and testing within the maritime, defense, aviation, or aerospace sectors? Join an innovative and rapidly evolving company, working on a breakthrough product that supports a purposeful mission. As an Integration Technician, you will be responsible for the assembly, integration, and testing of autonomous surface vessels (ASVs), collaborating closely with engineering and development teams to ensure seamless component and system integration. Responsibilities • Assemble, integrate, and test autonomous surface vessels (ASVs) according to rigorous Department of Defense (DoD) standards., • Collaborate with engineering and development teams to ensure seamless integration of various components and maritime systems., • Utilize schematics, diagrams, and technical specifications to troubleshoot and resolve issues., • Employ IPC-620 certification standards for mechanical assembly and power tool usage., • 2+ years of recent experience in building large sub-assemblies and/or final assemblies., • Proficiency in using tools and equipment for assembly, testing, and troubleshooting electronic and mechanical systems., • Experience working with schematics, diagrams, and technical specifications., • Effective communication, collaboration, and problem-solving skills., • Military mechanical experience, especially from US Navy., • Experience with system integration in maritime, defense, aviation, or aerospace products., • Knowledge of autonomous systems, robotics, or sensor technologies., • IPC-620 certification., • Experience working in the early stages of a start-up company., • Hobbies include working on mechanical projects in spare time., • Proficient in Microsoft applications. Be part of a leader in revolutionizing defense autonomy at sea, developing cutting-edge unmanned surface vehicles that enhance maritime security and domain awareness. Benefit from a dynamic environment and a positive, team-oriented company culture. Opportunities for growth, learning, and advancement abound as the company expands, making it a perfect fit for go-getters who thrive in ever-changing work settings. Work Environment Join a modern start-up with a cutting-edge product supporting both commercial and Department of Defense customers. Work in a climate-controlled assembly shop and corporate headquarters with a friendly, driven, and collaborative culture. The company offers two openings on the 1st shift (7am-3:30pm) and four openings on the 2nd shift (3pm-11:30pm). Job Type & Location This is a Contract to Hire position based out of Austin, TX. Pay and Benefits The pay range for this position is $26.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Austin,TX. Application Deadline This position is anticipated to close on Dec 24, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description About Us We’re the Austin and San Antonio franchise owners of RealClean Private Aviation Detailing, operated remotely from Dallas. Since 2004, RealClean has been a trusted leader in high-end aircraft care—known for precision, discretion, and excellence. We deliver premium detailing and protection services to private jet owners, FBOs, and aviation partners who expect flawless results. Role Overview We’re seeking a hands-on Local Operations Manager / Administrative Lead to oversee daily operations across Austin and San Antonio. You’ll be the local heartbeat of our business—coordinating client communications, managing detailing crews, and ensuring FAA compliance and operational excellence. If you thrive under pressure, communicate clearly, and want to grow with a fast-scaling franchise, this role offers both challenge and upward potential. Key Responsibilities • Serve as the primary contact for clients, vendors, and FBO/MRO partners., • Coordinate job scheduling, crew assignments, and day-to-day field operations., • Manage client estimates, invoices, and CRM records., • Oversee quality control, inventory, and FAA Drug and Alcohol Testing Program compliance., • Recruit, onboard, and mentor technicians to maintain RealClean standards., • Based in Austin or San Antonio with strong local knowledge., • 5+ years in operations, admin management, or luxury service., • Aviation, automotive, or hospitality background preferred., • Proven leadership, organization, and client-relations skills. Career Growth Clear path to advance into a Regional or General Manager role as RealClean expands across Central Texas. Compensation & Benefits • $55,000–$65,000 annually, based on experience., • Performance-based bonuses tied to client satisfaction and growth., • Medical coverage and retirement plan options after introductory period. Job Type: Full-time Benefits: • 401(k), • Flexible schedule, • Health insurance, • Paid time off, • Retirement plan, • Vision insurance Experience: • Customer service: 5 years (Required), • Previous Corporate or Private Aviation Experience Willingness to travel: • 25% (Required) Work Location: Hybrid remote in Austin, TX

Job Description We are seeking a confident, focused, and dynamic Aircraft dispatcher to join our team. The ideal candidate will have previous experience in a dispatch role, preferably within the aviation industry, as well as have excellent communication skills and be adept at working in an ever-changing environment. The focus of the role is to provide continuing support to the aircraft team, ensuring on-time dispatch, devising flight plans, and other duties as required. Responsibilities • Assist with the planning and execution of flight paths., • Analyze aircraft performance, considering loading, en route winds, and weather forecasts., • Monitor Aircraft arrival and departure times and adjust schedules when there are delays., • Liaise with the ground crew to ensure that various tasks, including refueling and cleaning, have been completed., • Prepare flight paperwork for crew and ensure they receive it., • Ensure that all passengers and luggage are loaded onto the aircraft., • Prepare flight paperwork such as flight plans, passenger lists, and any other documentation required., • Ensure that pre-flight safety and compliance tasks have been carried out., • Work alongside the captain to authorize the dispatch of said aircraft., • Operate various equipment such as air bridges, stairs, and lifts as required.Requirements, • 2 years of experience within a service-focused role in the aviation industry, • Keen eye for small details, • Confident in completing logs and paperwork, • Excellent written and verbal communication skills, • Health and Safety Certification would be an advantage, • Driver's License would be an advantage, • Experience driving and moving different types of machinery and vehicles would be an advantage, • Confident delegator, • Excellent time keeping skills

Job DescriptionSkyGrid, a Boeing Company, exists to open the sky for autonomous flight. Based in Austin, Texas, SkyGrid builds ground based high-assurance third-party services to enable the safe operations and airspace integration of highly automated and autonomous aircraft. SkyGrid also acts as a key operational nexus for advanced air mobility, integrating and managing data, infrastructure, access, and traffic to support seamless and efficient air traffic services. The Skygrid team is looking for an experienced Senior Full Stack Software Engineer who will own the architecture and development of APIs, database schemas, and frontend applications using Python on ECS/EKS, PostgreSQL and React/NextJS(TypeScript) respectively. This individual will develop effective CI pipelines and coding practices to ensure quality and correctness of software products. In this role, you will work closely with test engineers to implement an automated test suite for the services and applications using pytest, JUnit, Cypress, Postman collections and GitLab CI. This person will guide and mentor a team of junior engineers.Performance Objectives: • Implement and deploy SkyGrid’s prototype software and automated test suite, • Maintain high-quality internal and external documentation for APIs, frontend applications, and development practices, • Mentor junior engineers on software architecture patterns and software design Responsibilities:, • Design and develop backend systems and APIs in Python, ensuring code quality and maintainability, • Make key high-level design decisions for distributed architectures, • Develop and maintain APIs using REST, gRPC, or similar, • Conduct rigorous testing, including lower-level software testing and higher-level system integration testing, • Engage in systematic debugging and root cause analysis to ensure software reliability, • Develop technical documentation, conduct code walkthroughs, and participate actively in code reviews, • Act as a mentor for more junior developers, fostering a team of independent and skilled professionals, • Collaborate in Agile development practices, including sprint planning, stand-ups, and retrospectives, • Translate business requirements into detailed software requirements and architectures Qualifications:, • 8+ years of software engineering industry experience, • Bachelor’s or Master’s degree in Computer Science, Software Engineering, or a related field, • Experience in a technical leadership role with the demonstrated capability to make high-level architectural design decisions for distributed systems, • Proven experience developing distributed applications and APIs using REST, gRPC, GraphQL, or similar, preferably in Python, • Experience with TypeScript and front-end frameworks like React, Vue, Angular, or similar, • Comfortable working in Docker and deploying to cloud container runtimes such as AWS ECS or Kubernetes, • Familiarity with relational databases such as PostgreSQL or MySQL, database migrations, query optimization, • Strong ability in technical documentation and effective communication skills, • Ability to translate business needs into technical solutions without significant guidance, • Proficiency in Git, and comfortable working in Linux or MacOS environments Preferred Qualifications:, • Experience in the aerospace, aviation, or autonomous systems industries is highly desirable, • Familiarity with safety-critical system development and associated standards, • Experience with continuous integration/continuous deployment (CI/CD) pipelines, • 8+ years of software engineering industry experience in C/C++ for safety critical systems Join Our Team and Enjoy Exceptional Benefits:, • Comprehensive Health Coverage from Day One: Enjoy immediate access to medical, dental, and vision insurance, including HSA and FSA options., • Generous Retirement Contributions: Benefit from an automatic company 401k contribution program, with no match required, plus an additional company matching program to boost your retirement savings., • Calm Annual Membership: Prioritize your mental health with complimentary access to mindfulness and meditation resources., • Discounted ClassPass Membership: Stay active and healthy with access to thousands of fitness studios and gyms nationwide., • Investment in Your Growth: Receive an annual stipend for learning and development to support your continuous education and skill development, • Engaging Team Activities: Participate in quarterly team-building events and celebrations organized by our dedicated culture committee.

Job Description Safety Engineer Location: Texas Salary: Competitive Experience Level: 3-5+ Years Description United Trades of America is seeking a Safety Engineer to support and enhance jobsite safety across our diverse construction portfolio. In this role, you'll help implement safety programs, enforce regulatory compliance, and build a culture where safety is embedded in every action. Whether working on aviation, education, multi-family, or civic projects, your impact will be felt daily. Responsibilities • Monitor and enforce project safety compliance on active construction sites, • Conduct daily safety walks, inspections, and audits, • Deliver onboarding, toolbox talks, and safety training sessions, • Investigate incidents, near-misses, and develop corrective action plans, • Maintain accurate safety documentation and reports, • Support project teams with site-specific safety plans and JHAs, • 3+ years of field experience in construction safety (GC preferred), • Knowledge of OSHA 1926 standards and local safety regulations, • OSHA 30-Hour Certification required; CHST preferred, • Strong interpersonal and observational skills, • Competitive compensation and career advancement opportunities, • Full medical/dental/vision benefits + 401(k) match, • A safety-first company culture with strong field support

Job Description Job Title: Avionics Technician (Assembler) Job Description Are you experienced in wire harness building within the Military, Aerospace, Aviation, or heavy industrial industries? Join an exciting, innovative start-up company that is quickly evolving. Be part of a team serving a purposeful mission with a breakthrough product. The Wire Harness Assembly Technician will support all wire harness and cable assembly for the Assembly/Production department. This role involves building large industrial wire harnesses from start to finish, requiring the ability to read and interpret drawings and create harnesses without a completed schematic. Responsibilities • Support all wire harness and cable assembly for the Assembly/Production department., • Build large industrial wire harnesses from scratch, similar to those in Aviation or Aerospace assemblies., • Utilize D399 connectors, with a preference for experience in Aviation/Aerospace/Military harness assemblies., • Interpret electrical drawings to create harnesses without a formal schematic., • Minimum of 2+ years recent experience building harnesses for Aviation, Aerospace, Military, or other heavy industrial assemblies., • IPC-620 certification or experience with Mil-Spec connectors., • Proficient in cutting, crimping, and labeling wires., • Experience with mechanical and electrical assembly tools including torque wrenches, crimpers, cutting tools, and basic hand tools., • Ability to interpret a drawing to create a complex wire harness from scratch., • Experience using AF8s or AFM8s to manufacture harnesses., • Experience in the early stages of a start-up company., • Proficient in Microsoft applications., • Ability to lift 50+ lbs. Work with a cutting-edge, urban, and modern start-up company offering a dynamic environment and a positive, team-oriented culture. The company is building cutting-edge unmanned surface vehicles, combining best-in-class hardware, software, and artificial intelligence. Enjoy opportunities for growth, learning, and advancement as the company expands. Benefit from free daily lunch and snacks on-site, free medical benefits once employed, and access to purchase company stock. This is a great opportunity for a go-getter to solve problems and contribute to big solutions. Work Environment Work in a climate-controlled assembly shop and corporate headquarters offices. Openings are available on the 2nd shift from 3pm-11:30pm. The entire operation will relocate to a new site by next summer, which is only about 8 minutes away. The company offers a very friendly, driven, collaborative culture. Job Type & Location This is a Contract position based out of Austin, TX. Pay and Benefits The pay range for this position is $25.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Austin,TX. Application Deadline This position is anticipated to close on Dec 22, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

CBP Air Interdiction Agent Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America. If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demand–APPLY TODAY! Duty Locations Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following: Southeast Region: Homestead, FL and CAMB: Aguadilla, PR Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX NASOC UAS locations: Sierra Vista, AZ; San Angelo, TX Duties and Responsibilities As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include: • Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels. • Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities. • Collecting, refining, and analyzing strategic and tactical intelligence. • Supporting search and rescue and humanitarian efforts. Salary and Benefits Begin your career as an Air Interdiction Agent (AIA) and make up to $106,000 -$127,000 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below) and overtime pay, up to 25% of your salary. Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive. This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval). Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP). • GS-11, 1st year annual pay - $106,588 • GS-12, 2nd year annual pay - $127,754 • GS-13, 3rd year annual pay - $151,817 Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX). • GS-11, 1st year annual pay - $115,115 • GS-12, 2nd year annual pay - $137,974 • GS-13, 3rd year annual pay - $164,071 Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR). • GS-11, 1st year annual pay - $127,906 • GS-12, 2nd year annual pay - $153,305 • GS-13, 3rd year annual pay - $182,302 Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering. Qualifications Experience: You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as: • Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed. • Evaluating information rapidly and making judicious decisions promptly during in-flight operations. • Developing strategies and coordinating aircraft and ground assets. • Using information systems and databases to conduct information surveys, queries, update files and disseminate information. • Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot. Hiring Minimums: Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings: • Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating. • Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument. • Helicopter Rated: Rotorcraft Helicopter with instrument rating. • Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot). Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours. 250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025. FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position. Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 5, 2025) UAS Flight Hours: Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the "Total flight time" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification. Other Requirements Citizenship: You must be a U.S. Citizen to apply for this position. Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years. Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the "day before an individual's 37th birthday" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement. NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position. Age Waiver: Creditable law enforcement officer service - Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v. Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application. Training: This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures. Travel Required: You may be expected to travel for this position based on operational needs. How to Apply There Are Three Ways to Apply to Become an Air Interdiction Agent: 1. Fill out the Air Interdiction Agent applicant checklist and email it to a recruiter at along with a copy of your resume; OR 2. Apply on USAJOBS ; OR 3. Apply on Airline Apps. Stay Updated – Opt into CBP’s talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. You’ll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

Job Description Description The Project Manager will lead and motivate a team in the day-to-day management of project safety, quality, schedule, cost control, contracts, risk, suppliers, proposals, estimates, documentation turnover, client relations/management, field staff and other duties required to execute Design-Only, Engineer Procure Construct (EPC), Construction Management, Construction, and Program Management projects. The Project Manager leads projects from inception to completion and may perform the role of EPC Project Manager or Program Manager, as well as provide guidance to others performing these roles as required by the specific project. The Project Manager is responsible for overall project execution and successful completion of projects on time and within budget. • Provide leadership and guidance of all aspects of multi-discipline engineering projects from concept to completion, including overall safety, quality, engineering, procurement, construction, environmental compliance, project controls, and public/community relations., • Establish project teams, coordinate activities of multiple disciplines, and ensure the efficient, cost-effective utilization of staff., • Manage all aspects of project communication., • Lead the Project Management team in administering request for proposal (RFP) package development, bid and selection process, and scope of work documents., • Develop and monitor project schedules, manage scope, and control project costs., • Serve as the primary point of contact for clients regarding efforts such as client coordination, strategic planning, master scope management, budget finances, subcontracting, project staffing, environmental compliance, facility support and schedule attainment., • Manage the review, negotiation, approval, and execution of prime contracts, subcontracts, and change orders., • Lead internal and external project risk reviews and consult with Risk Department as required., • Manage and approve internal and external reports, providing detailed, accurate project cost forecasts and accruals to client(s) and Global Practice leadership as required., • Manage project controls efforts, including project cost reporting, scheduling, project work breakdown structure establishment, project set-up and closeout within the accounting system, and field progress tracking., • Monitor progress on projects and provide input into areas of concern and direction or redirection to enhance achievement of project schedules, productivity of goals, budgets, quality, and overall profitability of the project., • Responsible for managing contract closeout activities., • Responsible for generating new business revenue by developing new client relationships or leveraging existing client relationships., • Adhere to companys safety programs, trainings, and policies, as well as promote and manage the safety and health performance of project team members and subcontractors., • Participate in and attend industry-associated conferences and/or committees., • Provide leadership, guidance, and instruction to less experienced staff., • Responsible for QA/QC process adherence., • Responsible for compliance with company and site safety policies., • Performs other duties as assigned., • Bachelors degree in engineering, construction management or related degree from an accredited program and 7 years applicable experience required., • Prior experience on construction project sites or executing program management in the industries of aviation, commercial, energy, government, manufacturing, oil & gas, process, transmission & distribution, or water is preferred., • Excellent written and verbal communication skills., • Strong analytical and problem-solving skills, and attention to detail., • Ability to thrive in a fast-paced, demanding work environment, ability to work overtime on short notice., • Excellent computer skills and proficiency using Microsoft Office, • Ability to work collaboratively with others (owners, contractors, engineers, designers) in a multi-disciplined project team environment to resolve design or drawing issues as appropriate and to accomplish objectives.

Job DescriptionAt Skyways, we are building a new form of air transportation—what some call the flying car. Backed by fresh funding and a major STRATFI contract from the U.S. Air Force, we’re uniquely positioned to lead the next wave of aviation innovation. Our fully autonomous unmanned aerial vehicles (UAVs) represent a breakthrough opportunity to move goods—and soon, people—in ways that are faster, safer, and more efficient than ever before. Unlike anyone else in the industry, our strategy blends rapid iteration with real-world deployment, and it’s already paying off. Skyways is a fast-growing startup based in Austin, TX, supported by top Silicon Valley investors including Y Combinator. Though we’re early-stage, our vehicles are already in production and in the hands of paying commercial customers (see here and here). With robust financial backing and government partnerships accelerating our momentum, there’s never been a better time to join us and help build the future of transportation! The Opportunity Skyways is expanding, and we're looking for our first Technical Program Manager. This is a crucial role responsible for diligently managing and driving the execution of important programs vital to the development and deployment of Skyways' autonomous aircraft. This role ensures programs meet strategic goals, timelines, and quality standards. This position provides dedicated, expert-level program leadership, coordination across different teams, and strong risk management for our rapidly growing portfolio of projects. Location: Austin in officeWhat You'll Do: • Build and maintain strong customer relationships, including regular on-site visits and travel to customer locations for reviews, launches, and key milestonesFocus on understanding customer needs, prioritizing them, and ensuring they’re met., • Manage contracts, schedules, and resources, including contract writing (proposals), negotiations, and compliance., • Lead program reviews and clearly communicate and report on status, risks, and changes., • Coordinate across engineering, manufacturing, operations, and marketing., • Ensure deliverables meet commitments and quality standards.What You'll Bring:, • 6+ years managing complex technical programs (aerospace, robotics, defense preferred), • Customer-facing experience with both technical and contractual oversight, • Strong organizational skills and attention to detail, • Ability to lead without direct authority and work across teams, • Proficiency with program management tools (Asana, G Suite, or similar)Bonus Points If You Have:, • Autonomous systems, aviation, or defense background, • FAA/DoD certification knowledge, • Startup or early-stage program experience

Job DescriptionVRX, Inc. offers proactive, big-picture thinking and planning, as well as detailed program, project, and asset management. Established in 2006 by longtime construction engineer Noelle Ibrahim, PE, VRX is a woman-owned professional services firm certified as a WBE and HUB. We provide turnkey services to the public and private sectors. Our specialties include client-focused program and asset management; construction management and inspection; civil engineering; bridge and structural design; utility engineering; and comprehensive environmental services. VRX is more than 180 people strong in offices across Texas, in Oklahoma and New York. Learn more at VRXglobal.com VRX is currently seeking an Aviation Construction Project Manager with aviation runway, taxiway, airport operations, and/or related experience. Candidate should have 5 to 10 years of experience as an Assistant Project Manager, guiding design, construction, inspection, and quality assurance on airfield runway and taxiway projects (i.e., concrete, drainage, grading and lighting, communicating with airport operation personnel, etc.) Job Responsibilities • Overseeing field and construction activities, construction coordinators and other CM support staff., • Performs QC checks on their own work product and that of their staff., • Supports the APM in coordinating with other Airport departments (i.e. Capital Delivery, CPEAT, DSD, Finance, etc.), • Assist APM, PM and CDPM in change management & scope development., • Liaison between contractors and internal field Airport stakeholders (i.e. Maintenance, Operations, Security, etc.)., • Attend Contractor Progress (OAC) meetings, punch walks, mockup reviews, etc., • Verifying the construction contractors’ mobilization schedules including recommendations to APM for approval of contractual requirements before issuance of Notice to Proceed., • Has a detailed knowledge of the preparation, updating, and maintenance of the project schedule(s). This will include an overall schedule and/or individual schedules, as required, to track design review activities, procurement activities and construction activities., • Coordinate with the Program/Project Manager in collaboration with pre-construction and design teams to review plans & information related to constructability and all costs involved in developing the project’s execution., • Reviewing and approving contractors’ Quality Assurance/Quality Control (QA/QC) and Logistics plan(s)., • Managing quality services related to oversight and supervision of construction contractors’ quality control services, including, at a minimum, confirmation that the standards required by the contract are met., • Reviewing, adapting as necessary, and monitoring construction safety programs., • Leading periodic construction meetings, and additional meetings if needed, to resolve issues impacting cost and schedule., • Supports the review and negotiations of Guaranteed Maximum Price (GMP) field costs, equipment, and General Conditions (GCs)., • Working with Airport UYLRTPPE ’s Environmental Officer to monitor compliance with all environmental requirements., • Overseeing construction monitoring and associated reporting as required to confirm Contractor compliance with the contract requirements., • Provides input to monthly pay-application reviews., • Review Daily Construction Reports prepared by construction coordinators and weekly work plans to achieve schedule compliance., • Supports the contract change order review process, including review of contractor estimates, negotiate change orders, and assist APM to obtain required approvals. Soft Skills Required:, • Leadership & Team Management: Guiding diverse teams, resolving conflicts, and keeping morale high on-site., • Communication: Clear, concise interaction with clients, subcontractors, and stakeholders—both written and verbal., • Time Management: Juggling multiple timelines and ensuring projects stay on schedule., • Problem-Solving: Quickly addressing unexpected issues like weather delays, supply shortages, or design changes., • Adaptability: Construction sites are dynamic, being flexible and calm under pressure is key., • Negotiation: Managing contracts, budgets, and vendor relationships with confidence and fairness., • Bachelor’s degree in Civil Engineering, Construction Management, or related field, • 5 to 10 years of project management experience on aviation/transportation improvement projects, • Preferred Licenses/Certifications – PE, CCM, PMP, • Experience with providing constructability review comments, • P6 Proficiency, • Must be able to obtain airport SIDA clearance and qualify to drive in Airfield Operations Area, if required NOTICE TO THIRD PARTY AGENCIES: Please note that VRX, Inc. does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, VRX, Inc. will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, VRX, Inc. explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of VRX, Inc VRX, Inc. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.” Powered by JazzHR LLos8OcHkv

Job DescriptionAs Accenture continues to grow, we have an increasing number of career opportunities available to you. Depending on the job and location, you may be directed to apply with Accenture Infrastructure & Capital Projects LLP or one of the following Legal entities: • We are seeking the following senior-level Aviation specialists for leadership roles in our growing Aviation practice: Executive Program Managers, Program Controls Managers, Construction Managers, Project Managers, and Design Managers. We have current opportunities in Texas and pipeline opportunities nationwide., • You'll provide program and financial management leadership for the client’s capital programs., • You'll advise clients on financial and business management issues, process improvement, and change management in planning, engineering, and construction., • You'll manage risk identification, program controls, budgets/funding, procurement, and governance/decision-making protocols., • You'll bring leadership in organizational readiness, project delivery methods, team development, and execution planning based on program complexities., • You'll possess in-depth knowledge of architecture/engineering practices, including design, construction methods, value engineering, building costs/codes, and commissioning., • You'll act as an extension of the client’s staff, liaising with airport staff, contractors, architects, engineers, inspectors, and stakeholders., • You'll assist airports with capital program formulation and implementation, understanding the unique challenges of the airport environment., • You'll manage multiple projects, coordinating tasks and stakeholders to ensure project success., • You'll work closely with various airport stakeholders, including airlines, tenants, executives, and municipal officials., • You'll support the change management process by analyzing and forecasting project changes, collaborating with the estimating team to review cost changes., • You'll have expertise in delivery methods like Construction Management at Risk, Design-Build, Progressive Design-Build, and Design-Bid-Build., • You'll bring experience in airport terminal design, construction administration, and program/project management, establishing collaborative relationships with stakeholders., • You'll interpret and apply schedule information, performance metrics, and financial data to manage projects., • You'll have excellent people management skills and the ability to communicate with all levels of staff, including executive-level discussions and presentations., • Onsite at client site: The work location for this role is onsite with our clients and partners to enable delivery and cultivate our client relationships.HERE'S WHAT YOU'LL NEED:, • Bachelor’s or master’s degree in architecture, engineering, or planning, • 15 years leadership experience on capital programs valued at $250M or moreBONUS POINTS IF YOU HAVE:, • PE license, PMP, PMI, and/or AIA certification

Job Description Job Title: Avionics Technician (Assembler) Job Description Are you experienced in wire harness building within the Military, Aerospace, Aviation, or heavy industrial industries? Join an exciting, innovative start-up company that is quickly evolving. Be part of a team serving a purposeful mission with a breakthrough product. The Wire Harness Assembly Technician will support all wire harness and cable assembly for the Assembly/Production department. This role involves building large industrial wire harnesses from start to finish, requiring the ability to read and interpret drawings and create harnesses without a completed schematic. Responsibilities • Support all wire harness and cable assembly for the Assembly/Production department., • Build large industrial wire harnesses from scratch, similar to those in Aviation or Aerospace assemblies., • Utilize D399 connectors, with a preference for experience in Aviation/Aerospace/Military harness assemblies., • Interpret electrical drawings to create harnesses without a formal schematic., • Minimum of 2+ years recent experience building harnesses for Aviation, Aerospace, Military, or other heavy industrial assemblies., • IPC-620 certification or experience with Mil-Spec connectors., • Proficient in cutting, crimping, and labeling wires., • Experience with mechanical and electrical assembly tools including torque wrenches, crimpers, cutting tools, and basic hand tools., • Ability to interpret a drawing to create a complex wire harness from scratch., • Experience using AF8s or AFM8s to manufacture harnesses., • Experience in the early stages of a start-up company., • Proficient in Microsoft applications., • Ability to lift 50+ lbs. Work with a cutting-edge, urban, and modern start-up company offering a dynamic environment and a positive, team-oriented culture. The company is building cutting-edge unmanned surface vehicles, combining best-in-class hardware, software, and artificial intelligence. Enjoy opportunities for growth, learning, and advancement as the company expands. Benefit from free daily lunch and snacks on-site, free medical benefits once employed, and access to purchase company stock. This is a great opportunity for a go-getter to solve problems and contribute to big solutions. Work Environment Work in a climate-controlled assembly shop and corporate headquarters offices. Openings are available on the 2nd shift from 3pm-11:30pm. The entire operation will relocate to a new site by next summer, which is only about 8 minutes away. The company offers a very friendly, driven, collaborative culture. Job Type & Location This is a Contract position based out of Austin, TX. Pay and Benefits The pay range for this position is $25.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Austin,TX. Application Deadline This position is anticipated to close on Dec 24, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description EDGE is a locally owned and operated Civil Engineering firm specializing in municipal transportation, drainage/stormwater systems, stormwater quality, and flood control systems. We have offices in Houston and Austin and are focused on delivering excellent services that provide value to our staff, clients, and communities. Our clients primarily include Federal, State, and Local Governments, Airports, and consulting firms. EDGE is experienced and talented enough to win complex and challenging projects that impact the communities in which we live while being small enough to provide growth opportunities, mentorship, and an authentic culture. Job Description: EDGE Engineering is seeking a Civil Engineer interested in public transportation, drainage, aviation, and flood control analysis & design. Applicant should have a strong track record of working on design projects for public sector clients. Job responsibilities will include: • Performing hydrologic and hydraulic (H&H) modeling in HEC-RAS and HEC-HMS, • Perform closed-conduit hydraulic modeling in StormCAD, ORD-DU, Civil-Storm, XPSWMM, PCSWMM and/or InfoWorks ICM, • Design stormwater facilities including detention ponds, water quality treatment, and erosion control measures, • Preparing reports, construction cost estimates and specifications in accordance with local, state and federal code requirements, • Clearly and consistently communicate and coordinate with the project team, project managers, and clients., • Oversee and train junior staff including reviewing work, answering questions, and providing technical guidance., • Work independently in addition to planning, organizing, and assisting a small team, • Depending on experience level and desire, the applicant may serve as an Assistant Project Manager, managing tasks, budgets, staff, and client coordination., • Bachelor’s Degree in Civil or Environmental Engineering, • PE License (Texas) or able to obtain in Texas, • Minimum 4-years of experience, primarily focused on H&H and drainage design, • Experience with Microsoft Office Suite, • Experience with CAD software, • Experience designing storm drain, ditches, and culvert for transportation projects., • Experience in Microstation or ORD, • Experience with ESRI ArcMap or other GIS applications, • Experience with HEC-RAS or HEC-HMS, • Experience with Infoworks ICM, XP-SWMM, EPA SWMM, KYPipe and other hydraulic models, • Experience preparing drainage reports and PS&E deliverables in compliance with state and local agency standards BENEFITS EDGE offers a competitive salary, a broad benefits package, and a flexible work week. Most importantly, EDGE offers the opportunity to jump into a young and exciting company where you can help shape and grow our brand while given the chance to accelerate your career rapidly. Compensation: $90,000- $130.000 per year Benefits: • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • Short Term Disability, • Long Term Disability, • 401(k), • 401(k) matching, • Flexible schedule - Work from home 2 days a week, • Health savings account, • Paid time off, • Bereavement, • Maternity/Paternity, • Paid Holidays (9), • EAP (Employee Assistance Program), • Professional development assistance, • Referral program, • Bonus opportunities

Job DescriptionDescription: About Veryon Veryon is the leading global provider of aviation software and information services, trusted by over 7,500+ customers, 75,000 maintenance professionals, and 100+ OEMs across nearly 150 countries. Our mission is to deliver smarter, predictive technology solutions, including our AI platform, Veryon AIRE that maximizes aircraft uptime and operational efficiency for the world’s most demanding aviation organizations. About the Role The Product Marketing Manager at Veryon plays a critical role in shaping go-to-market strategy, driving product positioning, and increasing product adoption across our Tracking and Tracking+ software portfolio. You will serve as the market intelligence expert, translating industry insights, buyer behavior, and competitive trends into compelling messaging, ICPs, personas, and enablement content. This role requires strong cross-functional collaboration with Product, Sales, Marketing, and Customer Success to ensure seamless alignment between product capabilities, customer needs, and GTM strategy. Key Responsibilities • Develop and refine product positioning, messaging frameworks, ICPs, and buyer personas., • Lead product marketing strategy for Tracking and Tracking+, including GTM planning, launch execution, and campaign collaboration., • Audit, improve, and maintain product marketing assets such as one-pagers, battlecards, FAQs, pitch decks, and product videos., • Partner with Sales to deliver enablement training and establish a structured feedback loop., • Analyze market, customer, and competitive insights to inform product direction and marketing priorities., • Drive cross-functional alignment across Product, Marketing, Sales, and Customer Success., • Standardize and scale processes for product launches and release communications., • Conduct win/loss analyses, gather customer insights, and create case studies and testimonials., • Monitor product adoption trends and campaign performance to drive optimization.Requirements:, • 5+ years of experience in Product Marketing, Product Management, or Technical Consulting, with at least 4 years in B2B SaaS., • Proven expertise in developing ICPs, personas, messaging frameworks, value props, and high-impact marketing collateral., • Strong understanding of GTM strategy, the full B2B marketing funnel, and sales enablement best practices., • Experience conducting market research, competitive analysis, and product intelligence., • Excellent communication, presentation, and storytelling skills., • Ability to thrive in a fast-paced, evolving environment; strong ownership mindset., • Analytical ability to translate data into actionable insights., • Experience supporting product launches in a SaaS environment., • Familiarity with tools like Salesforce, HubSpot, Asana, or product analytics platforms., • Background in creating video scripts, case studies, or customer storytelling assets., • Fueled by Customers: Customers are at the core of every decision., • Win Together: Collaboration is our competitive edge., • Make It Happen: No excuses. Just outcomes., • Innovate to Elevate: We boldly challenge what’s standard and lift what’s possible. #LI-Hybrid

Job Description EDGE Engineering is seeking a CAD Designer/Drafter to join our team in Austin, TX or Houston, TX. The CAD Designer/Drafter will work closely with staff across the company, including Project Managers, Task Leads, and Engineers-in-training, to produce design plans, construction details, and exhibits. The ideal candidate is driven, and able to self-learn new and ever-changing software, with the desire to grow within the company and the opportunity to make a significant impact on the efficient development and implementation of CAD standards. Projects will include public transportation, drainage, aviation, flood control, and water quality design. Applicants should be driven and committed to excellence and growth through hard work and dedication. Job Responsibilities: * Utilize computer-aided drafting, design software, and various other computer software packages to assist in preparing construction details, design plans, reports, and exhibits. * Transfers numerical, written, sketched, or electronic information from engineering markups and computer files to final plans and maps. * Visualizes and illustrates concepts or designs in 2D or 3D. * Inform Project Manager(s) of progress on assigned tasks and request work when needed. * Meet assigned deadlines. * Assist in the development and implementation of company-wide CAD standards. Requirements * Proficient in specialized civil design applications for AutoCAD, MicroStation or Open Roads Designer software. * Proficient in other widely used computer applications (i.e., Microsoft Office Suite products). * Basic knowledge of computer file directories and use. * Able to assist in the preparation of construction quantity and cost estimates. Preferred * Fundamental understanding of a variety of basic civil engineering principles and design procedures, including but not limited to drainage, pipe hydraulics, stormwater detention, grading, earthwork computations, water and wastewater systems, stormwater pollution prevention, etc. * Proficient in MicroStation and/or Open Roads Designer. * Knowledge of TxDOT and standard civil construction plans, details, and related documents. Benefits EDGE offers a competitive salary, a broad benefits package, and a flexible work week. Most importantly, EDGE offers the opportunity to jump into a young and exciting company where you can help shape and grow our brand while given the chance to accelerate your career rapidly. Benefits: * Health insurance * Dental insurance * Vision insurance * Life insurance * Short Term Disability * Long Term Disability * 401(k) * 401(k) matching * Flexible schedule - Work from home 2 days a week * Health savings account * Paid time off * PTO * Bereavement * Maternity/Paternity * Paid Holidays (9) * EAP (Employee Assistance Program) * Professional development assistance * Referral program * Bonus opportunities

Job DescriptionAt Skyways, we are building a new form of air transportation—what some call the flying car. Backed by fresh funding and a major STRATFI contract from the U.S. Air Force, we’re uniquely positioned to lead the next wave of aviation innovation. Our fully autonomous unmanned aerial vehicles (UAVs) represent a breakthrough opportunity to move goods—and soon, people—in ways that are faster, safer, and more efficient than ever before. Unlike anyone else in the industry, our strategy blends rapid iteration with real-world deployment, and it’s already paying off. Skyways is a fast-growing startup based in Austin, TX, supported by top Silicon Valley investors including Y Combinator. Though we’re early-stage, our vehicles are already in production and in the hands of paying commercial customers (see here and here). With robust financial backing and government partnerships accelerating our momentum, there’s never been a better time to join us and help build the future of transportation! The Opportunity At Skyways, we're pushing the boundaries of autonomous aerial platforms. This isn't just another engineering role; it's a critical position for a Senior Software Engineer with deep expertise in computer vision and robotics. We need someone who can directly contribute to our core technology and help drive our growth and revenue.What You'll Do: • Develop and implement computer vision and robotics algorithms for autonomous flight., • Focus on landing zone evaluation and detect-and-avoid systems., • Work with sensor data (e.g., IMUs) for non-GPS navigation., • Collaborate with flight and mission planning teams., • Contribute across the full software development lifecycle.What You'll Bring:, • 5+ years of experience in developing, testing, and deploying algorithms for perception, navigation, or object interaction in real-world applications., • Strong proficiency in C++ and/or Python., • A solid understanding of sensor fusion principles and practical experience with diverse sensor types., • Prior experience in aerospace, autonomous vehicles, or drone technology., • We need a proactive problem-solver who thrives in a collaborative environment and is committed to continuous learning and improvement. Strong communication skills are key.Bonus Points If You Have:, • Experience with embedded systems or real-time operating systems., • A background in guidance, navigation, and control (GNC) systems.

Job DescriptionThe Ground Service Equipment (GSE) Manager is responsible for the safe and efficient daily functioning of all GSE repair and maintenance activities. The GSE Manager may delegate such technical duties as circumstances require, but without relinquishing his/her personal responsibilities.ResponsibilitiesEssential duties and responsibilities include (but not limited to): • Maintain site practices and procedures that contribute to a safe, profitable, positive, and enjoyable work environment while applying the “Atlantic Attitude” at all times., • Help train and develop new hire employees in accordance with the established procedures. Provide assistance in training employees in areas of specialties., • Ensure proper staffing and delegate work assignments for all GSE personnel., • Supervise and facilitate performance of GSE personnel on their assigned shift by enforcing company policy and procedures. Administer disciplinary action as directed by the Operations Manager and General Manager., • Initiate incident reporting, investigation and assist solution planning for prevention of reoccurrence., • Operate and maintain heavy equipment, diesel engines, vehicles, and otherwise be knowledgeable of electrical troubleshooting methods and technology., • Inspect equipment to diagnose and troubleshoot problems identified by users., • Perform inspection of equipment following contractor or vendor repair to ensure proper operating conditions before release to users., • Perform equipment repair including portable powered equipment aircraft power units, aircraft ground generators, tugs and other aircraft ground support equipment., • Perform periodic and annual inspections and maintenance of equipment. Assist other mechanics in diagnosing and troubleshooting of equipment., • Prepare required records and reports on all assigned GSE equipment. Identify and order parts required., • Communicate work progress and significant issues with appropriate Manager., • Enforce good housekeeping practices and uniform standards to employees., • Operate fuel trucks, tugs, baggage handling and various other pieces of equipment as needed. In addition, this position will execute all duties related to daily line service operations as needed., • Daily quality assurance and accuracy of paperwork and auditing of repair paperwork., • Any additional duties that may be specific or unique to your location assigned by ManagementRequired Skills, • High school diploma or GED certificate., • At least 18 years of age., • 4 years’ experience in a supervisory/management role., • Valid state driver’s license and meet the company’s insurability requirements., • At least 1-year experience in an aircraft ground support equipment diagnostics and repair heavy equipment repair, diesel engines, drive systems, transmissions, hydraulic pumps and servos and general equipment maintenance specific to the identified equipment., • Hands-on experience in the maintenance and repair of the identified equipment and be capable of utilizing the mechanical tools of the trade, including diagnostic tools, as required by the essential functions., • Meet Atlantic Aviation’s operations and safety training requirements., • Good communication skills, both written and oral., • Basic proficiency in Microsoft Office applications including Word, Excel and Outlook., • Excellent customer relations skills required., • Flexible work schedule may include working overtime, nights, on weekends, holidays, and be on call.

Job DescriptionAt Skyways, we are building a new form of air transportation—what some call the flying car. Backed by fresh funding and a major STRATFI contract from the U.S. Air Force, we’re uniquely positioned to lead the next wave of aviation innovation. Our fully autonomous unmanned aerial vehicles (UAVs) represent a breakthrough opportunity to move goods—and soon, people—in ways that are faster, safer, and more efficient than ever before. Unlike anyone else in the industry, our strategy blends rapid iteration with real-world deployment, and it’s already paying off. Skyways is a fast-growing startup based in Austin, TX, supported by top Silicon Valley investors including Y Combinator. Though we’re early-stage, our vehicles are already in production and in the hands of paying commercial customers (see here and here). With robust financial backing and government partnerships accelerating our momentum, there’s never been a better time to join us and help build the future of transportation! The Opportunity As a Flight Test Engineer, you’ll own the planning, execution, and analysis of flight tests that validate our aircraft’s performance, safety, and reliability. You’ll define test objectives, design methodologies, and work hands-on with aircraft and data systems to turn real-world results into engineering decisions. This is a high-impact role that bridges engineering and operations. You’ll work closely with Systems, Software, GNC, and Flight Operations to scope test plans, coordinate execution, and interpret results — ensuring every test drives meaningful progress toward product readiness and certification.What You’ll Do: • Lead the planning, coordination, and execution of flight test campaigns., • Define test objectives, instrumentation requirements, and success criteria., • Develop detailed test plans, procedures, and flight readiness documentation., • Manage pre-flight configuration reviews and post-flight data debriefs., • Oversee telemetry setup, data logging, and analysis workflows., • Identify anomalies, conduct root-cause analyses, and drive corrective actions with engineering teams., • Propose and implement improvements to test methodology, data tools, and safety processes., • Mentor and support operators and engineers involved in testing., • Communicate results and insights clearly across technical and leadership teams.What You’ll Bring:, • Degree in Aerospace, Mechanical, Electrical, or Systems Engineering (or equivalent experience)., • Proven experience in flight test, systems integration, or aircraft development., • Strong understanding of flight dynamics, control systems, and telemetry., • Ability to interpret flight data and identify performance trends or issues., • Hands-on experience troubleshooting hardware and software in field environments., • Excellent documentation, communication, and coordination skills., • Comfort operating in dynamic, fast-paced test environments.Bonus Points If You Have:, • FAA Part 107 Remote Pilot Certificate., • Experience with PX4, ArduPilot, or custom flight stacks., • Familiarity with telemetry protocols (CAN, MAVLink, etc.)., • Proficiency in Python, MATLAB, or similar tools for analysis and automation., • Experience with large (>55 lb AUW) or autonomous UAVs.

Job DescriptionAt Skyways, we are building a new form of air transportation—what some call the flying car. Backed by fresh funding and a major STRATFI contract from the U.S. Air Force, we’re uniquely positioned to lead the next wave of aviation innovation. Our fully autonomous unmanned aerial vehicles (UAVs) represent a breakthrough opportunity to move goods—and soon, people—in ways that are faster, safer, and more efficient than ever before. Unlike anyone else in the industry, our strategy blends rapid iteration with real-world deployment, and it’s already paying off. Skyways is a fast-growing startup based in Austin, TX, supported by top Silicon Valley investors including Y Combinator. Though we’re early-stage, our vehicles are already in production and in the hands of paying commercial customers (see here and here). With robust financial backing and government partnerships accelerating our momentum, there’s never been a better time to join us and help build the future of transportation! If you're excited about Skyways and think you can help, send us your resume, portfolio, or even a quick note telling us what you'd want to work on. We read every submission. Let’s build the future of flight together!Who Are You? • Maybe you don’t see a role that matches your background exactly, but you’re excited by what we’re doing. You love hard problems, real-world systems, and high-leverage impact., • An engineer who wants to see your designs fly., • A builder who thrives on autonomy and ownership., • A marketer or storyteller who can shape how the world sees what we do., • An operator who makes chaos run on rails., • A person who gets up in the morning thinking, “How do we make the future real?”Why Join Skyways?, • Real tech, real customers — Our aircraft fly real missions today., • Zero-to-one energy — We move fast and build things that matter., • Small team, big ownership — Every person shapes the product and the culture.

Job DescriptionDescription: Sales Development Representative Why We Need You – The Mission & Our Vision Veryon is a leading software and technology company that exists to enable aviation teams around the world to improve efficiency and safety. Our products maximize uptime for aircraft maintenance teams through our customer driven innovation and world class customer service. Veryon has more than 7,500 customers in 137 countries, we service general and business aviation, military/defense, commercial aviation, and OEM industries. Our core values drive us, in business, internally, and in our everyday lives. As a Sales Development Representative at Veryon, you will play a pivotal role in identifying new business opportunities, building strong relationships with potential clients, and driving our sales growth. Your primary focus will be on generating leads, qualifying prospects, and setting up meetings for the sales team. This role will report to the Sales Director and have weekly cadences with the sales team. What You’ll Accomplish - Your Performance Objectives Objective 1: Within your first 30 days, you’ll develop a deep understanding of the Veryon product offerings and the customers we serve. You’ll spearhead lead generation and prospecting by doing the following: • Identify and research potential clients and decision-makers within target industries., • Utilize various channels (e.g., LinkedIn, industry events, referrals) to generate high-quality leads. Qualifying Leads: • Assess and qualify leads based on their potential to meet Veryon’s business needs and criteria., • Engage in meaningful conversations to understand prospects' pain points and needs, ‘pitch’ the customer how Veryon can help alleviate those pain points., • Develop and maintain relationships with key stakeholders and decision-makers., • Understand clients' business challenges and articulate how Veryon's solutions can address those challenges., • Maintain focus on key sales plays relayed by leadership and focus all efforts on these plays. Maintain and update Salesforce to accurately track all relative prospect data, business insights, and record of interactions., • Use Outreach Sales Tool to track consistent messaging that works., • Continuously develop knowledge and skills related to industry trends and Veryon’s value add in the market. Gets Stuff Done / Accountable: You are comfortable rolling up your sleeves and delivering on a short timeline with limited resources. You are comfortable thinking strategically, but also enjoy the process of “doing the work” yourself, and you take pride in the successes you have delivered in past roles. You own your work, start to finish, but are not afraid to ask for help if needed. Influencing and relationship building: You know you cannot do it yourself. You have the communication skills and emotional intelligence to quickly establish credibility with and gain the trust and respect of everyone in the organization. You must be able to balance asking the right questions with ensuring the deliverables of peers are not impacted. Proactive: You have no problem planning the work, working the plan, and proactively communicating your progress along the way. You anticipate risks and issues that will arise and mostly mitigate them independently. Kind, humble, and fun: We want you to be a person we enjoy collaborating with, spending time with, and investing in. You may be this person if you already invest heavily in those you work with, and if you consistently receive feedback that you are a great colleague and teammate. A great sign is if people go out of their way to work with you, no matter the situation. How We Work – The Core Values That We Live By Fueled By Customers: We work hard so our customers can get more uptime. A customer-centered approach is on the forefront of our minds. We’re big on transparent communication with our customers, and we celebrate their wins internally because we love the positive impact we’re making on their lives. Win Together: We focus on the “we” and not the “me”. Collaboration is key, we value diverse backgrounds and skill sets. Our mission is to win as a team, we think everyone plays an integral part in our success. Make it Happen: When we make a commitment, we get it done. We take a proactive approach, we commit, we adapt to evolving landscapes and problems, we tackle problems at every difficulty level. Innovate to Elevate: We set the standard in aviation by embracing and advancing cutting edge technology. We take a fail-forward approach using everything as a learning experience. We encourage creativity and experimentation within our teams. This helps us set the bar high and provide world class expertise in aviation. Requirements:

Job DescriptionAt Skyways, we are building a new form of air transportation—what some call the flying car. Backed by fresh funding and a major STRATFI contract from the U.S. Air Force, we’re uniquely positioned to lead the next wave of aviation innovation. Our fully autonomous unmanned aerial vehicles (UAVs) represent a breakthrough opportunity to move goods—and soon, people—in ways that are faster, safer, and more efficient than ever before. Unlike anyone else in the industry, our strategy blends rapid iteration with real-world deployment, and it’s already paying off. Skyways is a fast-growing startup based in Austin, TX, supported by top Silicon Valley investors including Y Combinator. Though we’re early-stage, our vehicles are already in production and in the hands of paying commercial customers (see here and here). With robust financial backing and government partnerships accelerating our momentum, there’s never been a better time to join us and help build the future of transportation! The Opportunity As an Embedded Linux Software Engineer, you will be a key contributor to the development of our embedded systems. You'll be responsible for designing, implementing, and debugging low-level software that controls critical hardware components, ensuring our systems are reliable and high-performing. Location: Austin in officeWhat You'll Do: • Design and develop robust embedded software and drivers for custom hardware platforms running on Linux., • Integrate and port Linux kernels and board support packages (BSPs) for new hardware designs., • Debug complex software issues at the system level, including bootloader, kernel, and driver problems., • Collaborate with hardware engineers to bring up new boards and resolve hardware/software integration challenges., • Write and maintain documentation for software design and architecture.What You'll Bring:, • 5+ years of professional experience in embedded software development., • Strong proficiency in C/C++ and experience with scripting languages like Python or Bash., • Extensive experience with the Linux operating system, including kernel-level development, device drivers, and system programming., • Proficiency with version control systems (Git).Bonus Points If You Have:, • Experience with real-time operating systems (RTOS)., • Knowledge of various communication protocols (e.g., I2C, SPI, UART, Ethernet, CAN).

Job Description How would you like to take the knowledge you already have, and use it in a new and exciting career in the aviation industry? Hallmark Aviation has earned a reputation for providing best-in-class service for some of the world's leading airlines. We focus heavily on employee happiness and employee engagement. Our team of highly skilled and engaging agents is what drives our company to be the emerging leader in above-the-wing ground handling services. We invite you to apply and be a part of our exclusive team to provide the ultimate service...... peace of mindHallmark Aviation Services seeks to build a diverse team of highly motivated individuals to provide outstanding service to International Airlines at Austin-Bergstrom International Airport (AUS). We cater to a distinctive clientele. We offer part-time positions, English Needed, Spanish Speaking a plus! • Excellent advancement opportunities, • Paid Training, • Dynamic Workplace, • Medical benefits (Full-Time Employees), • Voluntary dental, vision, and a matching 401k plan You will also learn to perform the following functions throughout the course of your employment: • Learn behind-the-scene workings of an international airport., • You will rotate through check-in counter, lobby area, departure gate, customs, arrivals and other areas within the airport., • Experience how to effectively navigate through various challenges and flight activities to ensure on-time performance., • Enjoy the opportunity to professionally interact with high-profile passengers., • Eager to learn new skills, • Organized and logical thinker, • Make quick and rational decisions, • Problem Solving, • Ability to adapt quickly to unforeseen situations, • Effective communication skills and good listening skills, • Able to multi-task and carry out duties in a dynamic environment, • At least 18 years of age, high school graduate or G.E.D equivalent., • Eligible to work in the United States, • English proficient, other languages are a plus. If you've come this far, then take the next step towards elevating your skills and building your new career. It's just one click away. Job Location Austin, Texas, United States Position Type Part-Time Salary $21.00/hr with Airline Experience - USD Required Training Required to study and successfully complete mandatory training modules Company DescriptionLeading above the wing ground handling company with over 32 years in the BusinessLeading above the wing ground handling company with over 32 years in the Business

Job Description Customer Service Agent This position is responsible for providing total customer service to all people desiring to use customer or charter service by being attentive to their needs, politely handling their inquiries promptly, and completing the required transactions as noted below. Additional responsibilities include ramp, aircraft cleaning, operations, wheelchair assist, and commissary duties as required. Essential Duties and Responsibilities: • Processing Customers tickets, checking baggage, monitoring carry-on baggage for size and quantity, and assigning seats, • Providing information on arrival and departure times, boarding procedures, carry-on regulations, and seating arrangements, • Handling denied boarding situations, soliciting volunteers, accommodating Customers and providing hotel, meal, and taxi vouchers when appropriate, • Ensures FAA, Airline, and airport regulations are followed, • Enforces safety/security measures and protects sensitive zones, • Assists Customers with special needs, i.e., Customers who need assistance in boarding, • Brings Wheelchair passengers from ticket counter to gates and gates to baggage service, • Excellent communication skills, • Able to read and write English; bilingual skills a plus, • Ability to work efficiently under time constraints, • Must be available to work varied hours including swing and graveyard shifts plus weekends and holidays, • Must be well groomed and physically fit, • Completely clean and search an aircraft, • Other duties as assigned, • MUST HAVE VALID DRIVER'S LICENSE, • Must pass a ten (10) year background check and pre-employment drug test, • Must have authorization to work in the U.S. as defined in the Immigration Act of 1986 Must be able to carry 70-pound suitcase from the floor to 18 inches and carry 70 pound suitcase in front of you with both hands for a distance of up to 25 feet; must have physical dexterity sufficient to perform repetitive tasks and motions, including bending at the waist and knees, squatting, kneeling, crawling, twisting and sustaining those positions for extended amounts of time. Must have sufficient vision and ability to safely perform the essential functions of the position.

Job DescriptionAt Skyways, we are building a new form of air transportation—what some call the flying car. Backed by fresh funding and a major STRATFI contract from the U.S. Air Force, we’re uniquely positioned to lead the next wave of aviation innovation. Our fully autonomous unmanned aerial vehicles (UAVs) represent a breakthrough opportunity to move goods—and soon, people—in ways that are faster, safer, and more efficient than ever before. Unlike anyone else in the industry, our strategy blends rapid iteration with real-world deployment, and it’s already paying off. Skyways is a fast-growing startup based in Austin, TX, supported by top Silicon Valley investors including Y Combinator. Though we’re early-stage, our vehicles are already in production and in the hands of paying commercial customers (see here and here). With robust financial backing and government partnerships accelerating our momentum, there’s never been a better time to join us and help build the future of transportation! The Opportunity Skyways is at a critical inflection point, scaling from early production to mass deployment of autonomous aerial vehicles. This is your chance to revolutionize air transportation as our CTO, defining the technical vision and building a world-class engineering organization. This isn't just a job; it's a once-in-a-career opportunity to shape the future of autonomous aviation.What You'll Do: • Define and execute the comprehensive technical strategy for our autonomous aerial vehicles., • Scale the engineering organization across multi-disciplinary functions., • Lead, mentor, and guide our teams from R&D through mass production and certification., • Act as a critical decision-maker, unblocking projects to ensure we move fast and deliver., • Be the technical face of the company to key customers and investors., • Provide high-level engineering feature development roadmaps.What You'll Bring:, • 15+ years of progressive technical leadership, with 5+ years in a senior executive role overseeing multiple engineering disciplines in aerospace or autonomous systems., • Demonstrated experience taking a product from prototype to mass production, specifically with complex hardware products and hardware-centric teams., • Deep expertise across core engineering disciplines relevant to autonomous aviation (Aerospace, Mechanical, Electrical, Software, AI/Autonomy, Systems)., • Ability to build, mentor, and inspire high-performing teams in a fast-paced, startup environment.Bonus Points:, • Prior CTO experience at a successful hardware startup.

Job Description Who We Are OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Program. Come join us! For more information visit OWLServices.com and follow us on LinkedIn. Role We are seeking a skilled and experienced Journeyman Electrician. The Journeyman Electrician is responsible for installing, repairing, and maintaining electrical systems. Our ideal candidate is self-motivated, goal-oriented, and driven to accomplish department goals. This is an opportunity for a long term position and to join a growing company. Responsibilities • Maintains current licensing and training requirements, • Analyzes blueprints effectively and utilizes such information on jobsite, • Installs, maintains, and/or troubleshoots electrical systems in compliance with the National Electric Code (NEC), • Demonstrates ability to layout conduit systems, various lighting systems, basic control systems, and feeders, • Participates in toolbox talks, safety audits, and related safety functions, • Provides technical assistance to other field employees as needed, • Works as a member of a cohesive team while demonstrating ability to work without direct supervision., • Performs other related duties as required and assigned Requirements and Skills • Must be willing to travel nationwide up to 85% of the time, • Must complete and pass a drug and background check, • Must be open to traveling nationwide up to 85% of the time., • Must have 6 (+) years of heavy commercial electrical experience, • Requirements: Valid Driver’s License and State Journeyman's Electrical License (Required): first-week orientation and training will be conducted in person at the Fort Worth, TX office ., • Proficiency in Microsoft products, particularly Office (Excel, Word, Email), • Excellent verbal and written communication skills, • Exceptional time management, accountability, and prioritization skills, • Self-motivated, goal- oriented, and driven to accomplish department goals, • Ability to be organized, problem solve, and be solution oriented, • Ability to support a fast paced, demanding work schedule Compensation and Benefits • PTO, • 401(k) match, • Health, dental, vision, and life insurance, • 10 Paid Holidays, • Health, Dental, and Vision Insurance, • HSA and FSA, • Disability & Occupational Accident Insurance, • Company - Paid Life Insurance policy, • Employee Assistance Program (EAP), • World-class paid training program for you to learn the skills for long term career success

What is a Hospital Corpsman? As Sailors, we rely on exceptional medical personnel to keep our servicemen and women healthy. As a Hospital Corpsman, you fulfill that critical role by assisting in a wide range of departments and procedures, from dispensing vaccines and analyzing lab samples to aiding in dental operations and assisting in emergency surgeries. You'll get to try your hand at just about everything while making a huge difference for the Sailors you serve. Want to start your journey with the Navy? Apply Now Enlisted None What to Expect as a Navy Hospital Corpsman Hospital Corpsman Histopathology More Information Responsibilities Hospital Corpsmen (HM) assist health care professionals in providing medical care to Navy personnel and their families. They may function as clinical or specialty technicians, medical administrative personnel and healthcare providers at medical treatment facilities. Specifically, Hospital Corpsmen may be called upon to: • Perform emergency medical treatment on SEALs, Seabees, Marines and other military personnel injured in the field, as well as on Sailors aboard ships or aircraft, • Perform emergency dental treatment as well as construct dental crowns and bridges, process dental X-rays and operate X-ray equipment, • Serve as an operating room technician for general and specialized surgery, • Help administer a wide range of preventive care and medications, including immunizations and intravenous fluids, • Conduct physical examinations and assisting in the treatment of diseases and injuries, • Supervise sanitation and safety conditions in the workplace, • Maintain patient treatment records, conduct research and perform clinical tests, • Assist Navy Physicians and Nurses in a variety of medical fields, including, but not limited to: radiology, physical therapy, phlebotomy, dental, surgery, family medicine, pathology, women's health and more Work Environment As a Hospital Corpsman, you have the most diverse range of work environments available in the Navy. Your job will likely take you all over the world-and far out of your comfort zone. As a Hospital Corpsman, you could be assigned to a Navy medical treatment facility, like an on-base hospital or clinic. You could also work on an aircraft carrier in the middle of the ocean or a submarine in the depths of the sea. Wherever you're assigned, you'll work alongside other medical professionals to be trained as a skilled first responder, whether your skills are needed bedside or in the field. Training & Advancement Upon completion of initial training at Recruit Training Command Great Lakes (known as Boot Camp), you'll report for specialized training including: Hospital Corps "A" School (19 weeks) in San Antonio, Texas for training on basic principles and techniques of patient care and first aid procedures. Field Medical Service School at Camp Lejeune, NC, or Pendleton, CA for specialized training on medical services relating to Seabees and Marine Corps units if you apply and assignments are available. After you complete your training, you'll be assigned to a Navy medical treatment facility or an operational Navy or Fleet Marine Force unit. HMs may also go on to receive assignments to ships, submarines or overseas posts. Promotion opportunities are regularly available but competitive and based on performance. Advanced Training Advanced technical training, or "C" school, is optional and available to those who qualify after "A" School training is completed. HMs may enroll in advanced training for over 20 different credentials and specializations including: • Aerospace Physiology & Medical Technician - Assist in the treatment of naval aviators and flight personnel., • Behavioral Health Technician - Assist psychiatrists and psychologists in providing mental health care for service members and their families., • Biomedical Equipment Technician - Assemble, maintain, troubleshoot and calibrate medical equipment., • Cardiovascular Technician - Assist in performing diagnostic and interventional cardiac procedures., • Deep Sea Diving Independent Duty Corpsman - Serve as a Medical Department Representative (MDR) for diving units., • Dental Hygienist - Provide dental hygiene services such as cleaning equipment, polishing restorations, applying sealants and other tasks under the supervision of a dental officer., • Dental Laboratory Technician - Perform basic and intermediate prosthetic laboratory procedures such as repairing prostheses or completing dentures., • Dental Maxillofacial Technician - Assists a maxillofacial prosthodontist in oral/craniofacial prosthetic procedures., • Dental Technician - Assist with dental duties including preventive dentistry and x-rays., • Electroneurodiagnostic Technician - Assist Neurologists in performing studies to identify patients with neurological disorders., • Field Medical Service Technician - Provide medical services to Sailors and Marines in field units worldwide., • Fleet Marine Force Reconnaissance Corpsman - Provides emergency medical services for Fleet Marine Force Reconnaissance personnel engaged in direct action and reconnaissance operations., • Fleet Marine Force Reconnaissance Independent Duty Corpsman - Provides medical services for Fleet Marine Forces and Special Operations Forces engaged in direct action, special reconnaissance and unconventional warfare., • Hemodialysis/Apheresis Technician - Care for patients receiving hemodialysis treatments and related procedures., • Histopathology Technician - Assist pathologists with examination of tissue for disease., • Medical Deep Sea Diving Technician - Assist in the prevention and treatment of illnesses associated with deep sea diving and high-pressure conditions., • Medical Laboratory Technician - Perform and supervise the performance of manual and automated advanced laboratory procedures., • Nuclear Medicine Technician - Operate and maintain equipment that traces the presence and movement of radioactive isotope in a patient's body., • Occupational Therapy Assistant - Help Occupational Therapists administer treatment plans for acute and chronic rehabilitation., • Optician - Produce single vision and multifocal spectacles from prescriptions, and help Optometrists in the treatment of patients with ocular disorders., • Orthopedic Cast Room Technician - Assist in the application and removal of casts and traction, and assist in minor operative procedures., • Pharmacy Technician - Dispense prescribed medicines and pharmaceuticals., • Physical Therapy Technician - Assist physical therapists in administering physical therapy for patients., • Preventive Medicine Technician - Assist with preventive medicine and occupational health programs such as health and safety inspections and epidemiological investigations., • Radiation Health Technician - Monitors and analyzes radiation exposure, and administers the personnel dosimetry program., • Respiratory Therapist - Helps treat patients using nebulization therapy, mechanical ventilation, and similar treatments., • Search and Rescue Medical Corps - Performs aircrew and emergency medical care functions in support of Search and Rescue, MEDEVAC and CASEVAC missions for Navy and Marine Corps Aviation., • Submarine Force Independent Duty Corpsman - Submarine Force Independent Duty Corpsmen serve as the Medical Department Representative (MDR) and performs basic patient care aboard submarines and at isolated duty stations., • Surface Force Independent Duty Corpsman - Surface Force Independent Duty Corpsmen serve as the Medical Department Representative (MDR) and perform basic patient care aboard surface ships, with Fleet Marine Force Units and at isolated duty stations., • Surgical Technologist - Assists the medical officer in carrying out surgical techniques and providing pre- and post-surgical care to patients., • Urology Technician - Assists medical officer in examination and treatment of urological patients, including operations and X ray procedures. There's no better way to begin a successful career in health care than by serving as a medic in the medical support division of America's Navy. Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian world, such as Emergency Medical Technician (EMT), Home Health Aide, Anesthesiologist Assistant and more. Education Opportunities Beyond offering access to professional credentials and certifications, Navy technical and operational training in the medical field can translate to credit hours toward a bachelor's or associate degree through the American Council on Education. You may also continue your education through undergraduate degree opportunities like the Navy College Program and Tuition Assistance and the Post-9/11 GI Bill. Qualifications & Requirements A high-school diploma or equivalent is required to become an Enlisted Sailor and a Hospital Corpsman. Those seeking a position as a Hospital Corpsman must be U.S. citizens. A sincere interest in health care and science is extremely important for this role. You should have good communication, writing and arithmetic skills, be competent with tools and equipment. Important personal traits for this role include the ability to work well with others as part of a team, as well as dependability, trustworthiness and resourcefulness. In addition to good physical stamina, Hospital Corpsmen should also have normal color perception, vision correctable to 20/20, and good use of your hands. You must meet eligibility requirements for a security clearance. Please note that any illegal involvement with drugs may be disqualifying. General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before. Part-Time Opportunities Serving part-time as a Navy Reserve Sailor, your duties will be carried out during your scheduled drilling and training periods. During monthly drilling, Hospital Corpsmen in the Navy Reserve typically work at a location close to their homes. For annual training, you may serve anywhere in the world, including locations in the U.S., at bases overseas, or in areas where humanitarian needs are great. Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors. Most of what you do in the Navy Reserve is considered training. The basic Navy Reserve commitment involves training a minimum of one weekend a month (referred to as drilling) and two weeks a year (referred to as Annual Training) - or the equivalent of that. Hospital Corpsmen in the Navy Reserve serve in an Enlisted role. Before receiving the ongoing professional training that comes with the job, initial training requirements must be met. For current or former military Enlisted servicemembers, prior experience satisfies the initial Recruit Training requirement, so you will not need to go through Boot Camp again. For those without prior military experience, you will need to meet the initial Recruit Training requirement by attending Boot Camp in Great Lakes, IL. This training course will prepare you for service in the Navy Reserve and count as your first Annual Training. Compare Navy Careers See how a career as a Hospital Corpsman compares to other Navy jobs. Compare roles, pay and requirements for each job now.