Aviation jobs in Richardson, TexasCreate job alerts

Job DescriptionDescription: Position Summary: Avionics Technicians are responsible to the Avionics Supervisor and shall assure that the procedure outlined in the repair station manual as well as all FAA Regulations and manufacturer’s instructions are complied with. In addition to all responsibilities listed below, work involves the responsibility of performing routine maintenance, repairs, troubleshooting, modification of aircraft systems, and installations. In addition, component removal and reinstallation, operational checks, and leak checks are all within the responsibility of the avionics technician. The avionics technician is responsible for using sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution. Essential Functions and Responsibilities: • Ensure that all repairs are accomplished by approved methods and techniques and in accordance with the specifications set forth by the manufacturer in the service manuals, the Federal Aviation Regulations, service bulletins, and airworthiness directives and other data approved by the FAA administrator., • Responsible for following the coordinated activities of their shop or area, so as to minimize delays and increase production and efficiency., • Ensure that all work accomplished will be completed in strict accordance with the manufacturer’s maintenance and repair instructions and TITLE 14 CFR part 43., • Exercise all reasonable care to protect all parts-sub assembles; major assembles and completed units against loss or damage., • Ensure that all applicable repair station forms utilized are properly completed., • Ensure good housekeeping rules are observed and that all shop-working areas are kept clean and orderly at all times., • Ensure that proper tools and equipment are available and those tools are maintained in serviceable condition and ensure that any tool which is found unserviceable for any reason will be removed from service. The technician will be responsible for good housekeeping and will ensure that housing and facilities and safety precautions are adequate., • Ensure proper handling of parts and the preservation of all units or parts during the work process through the maintenance department., • Required to be thoroughly familiar with the requirements of the repair station manual, FAA Regulations, Airworthiness Directives and Advisory Circulars, Manufactures Service Letters/Bulletins and engineering orders., • Communicates with the avionics supervisor concerning progress of the assigned work., • Perform airframe electrical, avionics repairs, inspections, installations and modifications., • Removal and disassembly of defective parts, assembly and installation of replacement parts and testing of system., • Interpret technical manuals, drawings and blueprints., • Ensure that all discrepancies are signed off with all the information completed, such as part numbers, maintenance manual, ATA and Chapter, etc…, • Displays and promotes a positive attitude toward work and other employees., • Use experience and technical expertise to assist when necessary to meet completion and production schedules and produce the quality our company has come to expect., • Assure that all safety precautions are taken and that available protection devices are properly used at all times when applicable to the tasks performed, in order to reduce the risk of possible injury and health problems resulting from performing assigned tasks., • Technicians shall have all their work inspected (except for off-site repairs, see off-site maintenance requirements) by an appropriately rated inspector as listed on the “Roster of Management Supervisory and Inspection Personnel” at the completion of each task., • Participates with management to strategize and implement new maintenance tactics., • Provide leadership and communication to other fellow employees. This work requires the following physical activities. • Two or more years related experience and/or training; or equivalent combination of education and experience., • Airframe and Powerplant (A&P) Certificate (preferred), • Federal Communication Commission (FCC) License (optional), • Strong understanding in 145 repair station operations/regulations required., • Clean driving record., • Able to pass a background check., • Results oriented – Proven ability to achieve goals. Follow through and meet deadlines; Strong organizational, multi-tasking and time management skills; Strong problem-solving and analytical skills., • Communication – Oral Communication – speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions. Written Communication – Writes material in clear concise terms., • Leadership – Exhibits confidence in self and to others; Inspires and motivates others to perform well; Effectively influences actions and opinions of others; Inspires respect and trust; Accepts feedback from other. Displays passion and optimism; Mobilizes others to fulfill the vision., • Computer – Knowledge of MS Office Software, AutoCAD, and Corridor. (preferred), • Attention to detail., • Persistence in the face of obstacles., • A willingness to take on responsibilities and challenges., • Being reliable, responsible, and dependable, and fulfilling obligations., • Being pleasant with others on the job and displaying a good-natured, cooperative attitude., • Being sensitive to others' needs and feelings and being understanding and helpful on the job., • Guiding oneself with little or no supervision and depending on oneself to get things done IAW acceptable techniques and methods., • Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations., • Accepting criticism and dealing calmly and effectively with high stress situations being open to change (positive or negative) and to considerable variety in the workplace.

Job DescriptionDescription: Position Summary: Maintenance Technicians are responsible to the Maintenance Supervisor and shall assure that the procedure outlined in this manual as well as all FAA Regulations and manufacturer’s instructions are complied with. In addition to all responsibilities listed below, work involves the responsibility of performing routine maintenance, and major inspections on HondaJet, Piper, TBM, Pilatus, LearJets, Beechjet, Citations and other corporate aircraft. Troubleshooting, repair, and modification of aircraft systems and engines is accomplished by this position. In addition, component removal and reinstallation, operational checks, leak checks, and engine runs are all within the responsibility of the AMT. The AMT is responsible for using sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution. Essential Functions and Responsibilities: • Ensure that all repairs are accomplished by approved methods and techniques and in accordance with the specifications set forth by the manufacturer in the service manuals, the Federal Aviation Regulations, service bulletins, and airworthiness directives and other data approved by the FAA administrator., • Responsible for planning and coordinating the activities of their shop or area, so as to minimize delays and increase production and efficiency., • Ensure that all work accomplished will be completed in strict accordance with the manufacturer's maintenance and repair instructions and TITLE 14 CFR part 43., • Exercise all reasonable care to protect all parts- sub assembles; major assembles and completed units against loss or damage., • Ensure that all applicable repair station forms utilized are properly completed., • Ensure good housekeeping rules are observed and that all shop-working areas are kept clean and orderly at all times., • Ensure that proper tools and equipment are available, and those tools are maintained in serviceable condition and ensure that any tool which is found unserviceable for any reason will be removed from service. He will be responsible for good housekeeping and will ensure that housing and facilities and safety precautions are adequate., • Ensure proper handling of parts and the preservation of all units or parts during the work process through the maintenance department., • Required to be thoroughly familiar with the requirements of the repair station manual, FAA Regulations, Airworthiness Directives and Advisory Circulars, Manufactures Service Letters/Bulletins and engineering orders., • Communicates with the maintenance lead technicians concerning progress of the assigned work., • Perform airframe and powerplant repairs, inspections and modifications., • Removal and disassembly of defective parts, assembly and installation of replacement parts and testing of system., • Interpret technical manuals, drawings and blueprints., • Ensure that all discrepancies are signed off with all the information completed, such as part numbers, maintenance manual, ATA and Chapter, etc., • Displays and promotes a positive attitude toward work and other employees., • Use experience and technical expertise to assist when necessary to meet completion and production schedules and produce the quality our company has come to expect., • Assure that all safety precautions are taken and that available protection devices are properly used at all times when applicable to the tasks performed, in order to reduce the risk of possible injury and health problems resulting from performing assigned tasks., • Identify any employees' problems and concerns and deal with them, if unable to solve the problems, forward them to management., • Technicians shall have all their work inspected (except for off-site maintenance, see off-site maintenance requirements) by an appropriately rated inspector as listed on the Roster of Management Supervisory and Inspection Personnel at the completion of each task., • Participates with management to strategize and implement new maintenance tactics., • Provide leadership and communication to subordinates and employees., • Five or more years related experience and/or training; or equivalent combination of education and experience., • Five or more years demonstrated experience in aircraft maintenance inspections and repairs., • Clean driving record., • Able to pass a background check., • Ability to pass a drug screening test., • Willing to work off location, if needed., • Attention to detail., • Persistence in the face of obstacles., • A willingness to take on responsibilities and challenges., • Being reliable, responsible, and dependable, and fulfilling obligations., • Being pleasant with others on the job and displaying a good-natured, cooperative attitude., • Being sensitive to others' needs and feelings and being understanding and helpful on the job., • Guiding oneself with little or no supervision and depending on oneself to get things done IAW acceptable techniques and methods., • Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations., • Accepting criticism and dealing calmly and effectively with high stress situations being open to change (positive or negative) and to considerable variety in the workplace., • Results oriented Proven ability to achieve goals. Follows through and meets deadlines; Strong organizational, multi-tasking and time management skills; Strong problem-solving and analytical skills., • Communication Oral Communication speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Participates in meetings. Written Communication Writes material in clear concise terms.

Job DescriptionAbout ZiplineDo you want to change the world? Zipline is on a mission to transform the way goods move. Our aim is to solve the world's most urgent and complex access challenges by building, manufacturing and operating the first instant delivery and logistics system that serves all humans equally, wherever they are. From powering Rwanda's national blood delivery network and Ghana's COVID-19 vaccine distribution, to providing on-demand home delivery for Walmart, to enabling healthcare providers to bring care directly to U.S. homes, we are transforming the way things move for businesses, governments and consumers. The technology is complex but the idea is simple: a teleportation service that delivers what you need, when you need it. Using robotics and autonomy, we are decarbonizing delivery, decreasing road congestion, and reducing fossil fuel consumption and air pollution, while providing equitable access to billions of people and building a more resilient global supply chain.Join Zipline and help us to make good on our promise to build an equitable and more resilient global supply chain for billions of people.About You and The Role Do you thrive on helping others succeed? Do you enjoy work that's dynamic and varied? Are you someone who can read, interpret, and demonstrate technical information in a way that others can clearly understand? At Zipline, Maintenance Instructors do far more than traditional aviation training. From collaborating with engineers and subject matter experts to creating training content, to leading instructor-led classes or coaching technicians one-on-one through on-the-job (OJT) training—you'll play a vital role in keeping our US operations and logistics system running. This is not just another maintenance training role. Our team is building the world's first logistics system that serves all people equally. We save lives, reduce emissions, increase access to opportunity, and deliver essential goods at scale. Maintenance Instructors ensure our technicians are ready to keep our system safe, reliable, and compliant by delivering meaningful, timely training. Zipline is an FAA-certified Air Carrier under CFR §135 operating under a Continuous Airworthiness Maintenance Program (CAMP). Our instructors support training programs across the U.S. ensuring both regulatory compliance and technician readines What You'll Do • Develop training content for a wide range of maintenance topics using multiple media formats., • Deliver engaging instruction in both live classroom settings (in-person & virtual) and OJT environments., • Drive continuous improvement, including:, • Updating and enhancing existing courses., • Writing Maintenance Bulletins to quickly communicate critical updates., • Raising improvements or concerns through internal systems., • Coordinate training logistics, including scheduling courses and communicating details to stakeholders., • Manage documentation & compliance, including required forms, records, and LMS data entry., • Mentor future OJT instructors, developing identified technicians into trainers., • Collaborate cross-functionally on key initiatives, such as:, • Assisting technicians with FAA Repairman Certificate applications and liaising with FAA representatives., • Providing input to engineering and technical writers on new or updated OEM procedures.What You'll Bring, • FAA Mechanic Certificate with A&P ratings (or ability to obtain a Zipline FAA Repairman Certificate - FAA A&P equivalent)., • 1+ years of technical instructor experience (aviation maintenance training preferred)., • Experience creating training content and familiarity with Learning Management Systems (LMS)., • Strong organizational skills with the ability to balance multiple priorities., • Excellent communication skills (verbal & written) with the ability to adjust to your audience., • Genuine interest in continuous learning—at Zipline, there's always more to master., • Alignment with Zipline's mission: you believe access matters and are inspired to help bring essential supplies to every person on the planet. Maintenance Instructors at Zipline must be willing to work some flexible hours. You will have an assigned schedule, but due to the nature of on-site and virtual training events in which students may hail from various time zones, some flexibility for start and stop times are required at times. ~15% travel should be expected. Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, ancestry, national origin, religion or religious creed, mental or physical disability, medical condition, genetic information, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity, gender expression, age, marital status, military or veteran status, citizenship, or other characteristics protected by state, federal or local law or our other policies.We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Job DescriptionDescription: THIS IS A PART-TIME WEEKEND POSITION BEGINNING IN JULY. THE SCHEDULE IS AS FOLLOWS: FRIDAY 1PM-5PM , SATURDAY/SUNDAY 8AM-5PM Airframe and Powerplant Instructor Thrust Institute of Maintenance is seeking a highly skilled and knowledgeable Airframe and Powerplant (A&P) Instructor to join our esteemed faculty team. As an A&P Instructor, you will play a pivotal role in shaping the future of aviation by imparting your expertise and passion for aircraft maintenance to aspiring professionals. Responsibilities: Conduct engaging and informative lectures, practical demonstrations, and hands-on training sessions for A&P students, covering a wide range of topics related to airframe and powerplant systems. Develop and deliver curriculum content that aligns with industry standards, regulatory requirements, and the evolving needs of the aerospace industry. Foster an interactive and inclusive learning environment that encourages student participation, critical thinking, and problem-solving skills. Provide mentorship and guidance to students, supporting their academic and professional development. Assess student performance through assignments, exams, and practical assessments, and provide constructive feedback to facilitate their growth. Collaborate with fellow instructors and staff members to enhance instructional materials, update course content, and develop innovative teaching methodologies. Stay updated with the latest advancements in aircraft technology, maintenance practices, and regulatory changes to ensure the curriculum remains current and relevant. Support student recruitment efforts by participating in informational sessions, open houses, and industry events. Maintain accurate records of student attendance, grades, and academic progress. Qualifications: Valid FAA Airframe and Powerplant (A&P) certificate. Extensive experience in the aviation industry, with a strong understanding of current airframe and powerplant systems, maintenance practices, and safety protocols. Excellent communication skills, both verbal and written, with the ability to effectively convey complex technical concepts to diverse audiences. Passion for teaching and the ability to inspire and motivate students to achieve their full potential. Previous experience as an instructor or mentor in an academic or industry setting is highly desirable. Familiarity with instructional technology, learning management systems, and computer-based training tools is an advantage. Salary and Benefits: Competitive starting salary that will commensurate with experience and qualifications. Comprehensive benefits package, including health insurance, retirement plans, and paid time off. Professional development opportunities to enhance teaching skills and stay updated with industry trends. Access to state-of-the-art facilities and resources to support effective instruction. If you are passionate about aviation, possess the necessary qualifications, and are eager to make a difference in the lives of aspiring aerospace professionals, we invite you to join our team at Thrust Institute of Maintenance. To apply, please submit your resume, cover letter, and any additional supporting documents through our online application portal at careers.thrustflight.com. Note: Only shortlisted candidates will be contacted for further evaluation... Requirements:

CBP Air Interdiction Agent Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America. If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demand–APPLY TODAY! Duty Locations Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following: Southeast Region: Homestead, FL and CAMB: Aguadilla, PR Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX NASOC UAS locations: Sierra Vista, AZ; San Angelo, TX Duties and Responsibilities As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include: • Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels. • Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities. • Collecting, refining, and analyzing strategic and tactical intelligence. • Supporting search and rescue and humanitarian efforts. Salary and Benefits Begin your career as an Air Interdiction Agent (AIA) and make up to $106,000 -$127,000 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below) and overtime pay, up to 25% of your salary. Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive. This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval). Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP). • GS-11, 1st year annual pay - $106,588 • GS-12, 2nd year annual pay - $127,754 • GS-13, 3rd year annual pay - $151,817 Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX). • GS-11, 1st year annual pay - $115,115 • GS-12, 2nd year annual pay - $137,974 • GS-13, 3rd year annual pay - $164,071 Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR). • GS-11, 1st year annual pay - $127,906 • GS-12, 2nd year annual pay - $153,305 • GS-13, 3rd year annual pay - $182,302 Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering. Qualifications Experience: You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as: • Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed. • Evaluating information rapidly and making judicious decisions promptly during in-flight operations. • Developing strategies and coordinating aircraft and ground assets. • Using information systems and databases to conduct information surveys, queries, update files and disseminate information. • Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot. Hiring Minimums: Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings: • Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating. • Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument. • Helicopter Rated: Rotorcraft Helicopter with instrument rating. • Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot). Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours. 250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025. FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position. Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 5, 2025) UAS Flight Hours: Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the "Total flight time" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification. Other Requirements Citizenship: You must be a U.S. Citizen to apply for this position. Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years. Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the "day before an individual's 37th birthday" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement. NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position. Age Waiver: Creditable law enforcement officer service - Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v. Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application. Training: This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures. Travel Required: You may be expected to travel for this position based on operational needs. How to Apply There Are Three Ways to Apply to Become an Air Interdiction Agent: 1. Fill out the Air Interdiction Agent applicant checklist and email it to a recruiter at along with a copy of your resume; OR 2. Apply on USAJOBS ; OR 3. Apply on Airline Apps. Stay Updated – Opt into CBP’s talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. You’ll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. As a Senior Systems Engineer, you will u

Job Description Who We Are OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Program. Come join us! For more information visit OWLServices.com and follow us on LinkedIn. The Role We are seeking a motivated and dedicated Traveling Apprentice Electrician to fill multiple roles through our traveling projects in multiple states. The Electrical Apprentice will install, maintain and trouble shoot multiple types of electrical systems found in commercial and industrial locations and work under a licensed Journeyman. Our ideal candidate is eager to learn, possesses a strong work ethic, and has a genuine interest in pursuing a career as an electrician. This is an opportunity for a long-term position and to join a growing company. Responsibilities • Perform regular installation of electrical duties, • Work with and assists electricians on more difficult projects, • Perform electrical wiring or repair work, • Read blueprints Requirements • Background & Drug Screening: Must pass a background check and pre-employment drug screening., • Travel: Must be willing to travel nationwide up to 85% of the time., • Travel Pay: When assigned to travel you will additionally be compensated with weekly Per-Diem, Milage, and Travel time., • Orientation: First days of orientation and training will take place in Fort Worth, TX (Required)., • Experience: 4-10 years as an Apprentice or Tradesman in a commercial setting., • Education: High School Diploma or GED required; 5+ years of experience in heavy commercial electrical work strongly recommended., • Technical Skills: Experience with conduit bends, wire pulls, high-voltage circuits, generators, transformers, and switchgear., • Blueprints & Codes: Ability to read and understand blueprints, schematics, specifications, codes, and electrical formulas., • Safety & Certifications: Apprentice license required; OSHA 10 or 30 preferred; knowledge of OSHA lock-out/tag-out, NFPA-70E, and National Electrical Code., • ID Requirements: Must have two valid forms of ID for employment., • Preferred Training: At least 4 hours of formal NFPA-70E training, including arc-flash dynamics, hazard analysis, and PPE requirements. Compensation and Benefits • 10 Paid Holidays, • Flexible Time Off, • 401(k) Company Match, • Health, Dental, and Vision Insurance, • HSA and FSA, • Disability & Occupational Accident Insurance, • Company-Paid Life Insurance Policy, • Employee Assistance Program (EAP), • World-class paid training program for you to learn the skills for long term career success.

Job Description Who We Are OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Program. Come join us! For more information visit OWLServices.com and follow us on LinkedIn. Role We are seeking a skilled and experienced Journeyman Electrician. The Journeyman Electrician is responsible for installing, repairing, and maintaining electrical systems. Our ideal candidate is self-motivated, goal-oriented, and driven to accomplish department goals. This is an opportunity for a long term position and to join a growing company. Responsibilities • Maintains current licensing and training requirements, • Analyzes blueprints effectively and utilizes such information on jobsite, • Installs, maintains, and/or troubleshoots electrical systems in compliance with the National Electric Code (NEC), • Demonstrates ability to layout conduit systems, various lighting systems, basic control systems, and feeders, • Participates in toolbox talks, safety audits, and related safety functions, • Provides technical assistance to other field employees as needed, • Works as a member of a cohesive team while demonstrating ability to work without direct supervision., • Performs other related duties as required and assigned Requirements and Skills • Must be willing to travel nationwide up to 85% of the time, • Must complete and pass a drug and background check, • Must be open to traveling nationwide up to 85% of the time., • Must have 6 (+) years of heavy commercial electrical experience, • Requirements: Valid Driver’s License and State Journeyman's Electrical License (Required): first-week orientation and training will be conducted in person at the Fort Worth, TX office ., • Proficiency in Microsoft products, particularly Office (Excel, Word, Email), • Excellent verbal and written communication skills, • Exceptional time management, accountability, and prioritization skills, • Self-motivated, goal- oriented, and driven to accomplish department goals, • Ability to be organized, problem solve, and be solution oriented, • Ability to support a fast paced, demanding work schedule Compensation and Benefits • PTO, • 401(k) match, • Health, dental, vision, and life insurance, • 10 Paid Holidays, • Health, Dental, and Vision Insurance, • HSA and FSA, • Disability & Occupational Accident Insurance, • Company - Paid Life Insurance policy, • Employee Assistance Program (EAP), • World-class paid training program for you to learn the skills for long term career success

Job Description Who We Are OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Program. Come join us! For more information visit OWLServices.com and follow us on LinkedIn. The Role We are seeking a motivated and dedicated Apprentice Electrician to join our team. This position will be based Dallas / Fort Worth. The Electrical Apprentice will install, maintain and trouble shoot multiple types of electrical systems found in commercial and industrial locations and work under a licensed Journeyman. Our ideal candidate is eager to learn, possesses a strong work ethic, and has a genuine interest in pursuing a career as an electrician. This is an opportunity for a long term position and to join a growing company. Responsibilities • Perform regular installation of electrical duties, • Work with and assists electricians on more difficult projects, • Perform electrical wiring or repair work, • Read blueprints, • Proficient working in a commercial construction environment with different contractors, • Safety and equipment training a plus Requirements • With 1 to 5+ years of electrical experience in commercial construction, • Must meet company background and pre-employment qualifications, • 10 Paid Holidays, • Flexible Time Off, • 401(k) Company Match, • Health, Dental, and Vision Insurance, • HSA and FSA, • Disability & Occupational Accident Insurance, • Company-Paid Life Insurance Policy, • Employee Assistance Program (EAP), • World-class paid training program for you to learn the skills for long term career success.

Search and Rescue Medical Corps - Performs aircrew and emergency medical care functions in support of Search and Rescue, MEDEVAC and CASEVAC missions for Navy and Marine Corps Aviation. Specialized training received and work experience gained in the course of service can lead to valuable credentiali

Job DescriptionDescription: The Chief Inspector, reporting to the Director of Maintenance, is responsible for overseeing the overall operation of the Repair Station, ensuring compliance with all applicable FAA regulations. This role ensures that all work performed by Repair Station personnel meets the highest levels of quality and safety. The Chief Inspector is accountable for quality assurance, supplier/vendor oversight, and training, while also maintaining strict adherence to the company's FAA Repair Station/Quality Control Manual, FAA-approved Training Program Manual, and Operations Manual. Additionally, the Chief Inspector is responsible for notifying the Accountable Manager of any regulatory changes and holds the final authority for returning aircraft to service, including the completion of all necessary documentation to meet FAA requirements. Requirements: · Serve as the official representative to all Regulatory Agencies concerning maintenance, inspection practices, and procedures, ensuring the airworthiness of aircraft, alterations, and major modifications. · Liaises and coordinates with the FAA's assigned Principal Inspectors (PMI and PAI). · Assume responsibility for preliminary, hidden damage, in-process, and final inspection of all items processed by the repair station. · Ensure proper tagging and identification of all parts. · Compliance with all requirements regarding the Repair Station and contract maintenance activities. · Provide recommendations to the Director of Maintenance concerning the company’s capabilities to properly perform maintenance services within regulatory guidelines. · Develop maintenance/inspection policies and procedures in accordance with regulatory requirements. · Responsible for ensuring that Quality Assurance functions comply with the Inspection Procedures Manual. · Maintains the Capabilities list and notifications to the FSDO. · Maintain the calibration system for all required tools and equipment. · Ensure the effectiveness of company maintenance and inspection training programs and that proper records of training are maintained per regulatory requirements. · Oversee the Quality Assurance concerning aircraft airworthiness and inspection functions. · Ensure adherence to all relevant Airworthiness Directives, Service Bulletins, Advisory Circulars, Supplemental Type Certificates, or Parts Manufacturing Approvals. Complete all documentation according to applicable Regulatory Requirements. · Ensure that the company does not perform any work for which it is not rated. · Maintains Employee Personnel files, summaries and assessments. · Provide recommendations to the Director of Maintenance regarding policy change requirements, training, and equipment necessary to perform required duties. · Complete and forward Malfunction Defect Reports for all serious defects found during maintenance and inspection of aircraft as applicable. · Ensure all records of work are accounted for and complete with correct entries prior to releasing aircraft to service in accordance with approved Inspection Procedures Manual. · Issue Quality Assurance Inspection Stamps to qualified personnel and maintain proper records of issuance. · Ensure all required inspections have been accomplished in accordance with the Approved Maintenance Program and regulatory requirements. · Ensure proper documentation of all work performed is complete and properly filed. · Perform facility audits to ensure proper techniques are being applied during production, safety issues are addressed, proper housekeeping is in effect and maintains compliance with its approved Inspection Procedures Manual. · Responsible for obtaining proper certifications, testing, and documentation to ensure that all materials received for installation on an aircraft meet applicable FAA regulations. · Ensure all inspection personnel are properly trained and authorized to perform their assigned duties. · Perform other duties as assigned. Job Requirements: · High school diploma or equivalent required. · A minimum of ten (10) years of aviation experience on various types of general aviation aircraft. · At least five (5) years of experience as a Chief Inspector or Quality Supervisor on Part 145 repair station projects involving maintenance, modifications, and repairs. · A current FAA Airframe and Power Plant (A&P) license and FAA Inspection Authorization (IA) are required. · Deep knowledge and extreme familiarity with all FAA rules and regulations is required. · Strong organizational skills and the ability to multi-task effectively in a demanding environment. · Demonstrated ability to manage priorities and meet deadlines under pressure. · Proficiency in reading, speaking, and writing English. · Proficient in word processing, spreadsheets, email, MS Excel, Word, and AD software. Familiarity with Quantum MX is a plus. Additional Requirements: · Must pass a drug screen and background check. · Must possess a valid, current driver’s license. Work Environment: · Frequent exposure to outdoor weather conditions. · Occasional hazards include moving machinery, elevated work areas, fumes or airborne particles, and toxic or caustic chemicals. The work environment can be noisy. Physical Demands: · Ability to stand, walk, and reach with hands and arms. Regularly required to walk, sit, and talk or hear. · Ability to frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 40 pounds. · Must have close vision, distance vision, color vision, depth perception, and the ability to adjust focus. Equal Employment Opportunity: We are committed to providing equal employment opportunities to all employees and applicants, prohibiting discrimination based on race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, pregnancy, genetics, or any other legally protected status.

Job DescriptionSalary: Western Steel Buildings Bio | Our mission is to become a highly successful Company by providing superior products, outstanding service, and the greatest value in the steel building industry. We respectfully engage and challenge each other to continuously improve and perform at the highest level while embracing the positive feedback necessary to openly assess our performance. Our deep commitment to growth, development and personal responsibility enables us to deliver a superior value to everyone associated with our Company. Currently specializing in Design and Supply of fabricated steel packages for Pre-Engineered and Hybrid Steel Structures, our overwhelming success has established a deep network of owners and general contractors, allowing us to set ambitious goals for 2025. One of our top 2025 priorities is to grow and sharpen the existing capabilities of our in-house, metal-building-focused, Structural Engineering Team by adding a Structural Engineer who has an entrepreneurial spirit and experience working within the metal-building industry. This candidate must have experience completing project estimates, calculations, and review of Approval/Permit/Construction drawings fabrication detailing using MBS and Tekla Structures (detailing software). Position Summary | Western Steel Buildings is seeking a Structural Engineer to serve a key role within our metal building engineering services team. Project types include recreation, warehouse, aviation, cultivation, municipalities, educational facilities, churches and others. Job Responsibilities Master Western Steel Buildings MBS project templates, standards, and procedures Responsible for MBS-originated estimates, engineering packages, and procurement packages Responsible for identifying, managing, and mitigating financial risk exposure to Western Steel Buildings Learns to leverage and manage external resources to increase the volume of executable work Develops tremendous Commercial Awareness of MBS limitations, vendor contracts, and project lifecycle stakeholders Peer review work originated by others Address technical issues during fabrication and/or construction Field walk-downs and drafting field reports Reports to PEMB Studio Leader Qualifications Bachelors degree in Civil Engineering, Masters with Structural focus is a plus 2-5 years of experience in structural designs of metal buildings Passed FE Exam. Preparing or passed PE Exam. Currently contributing to a diverse team in the completion of multiple projects through design and construction phases Highly organized, self-motivated, strong communicator, and respected leader Proficient in MBS Proficient in MathCAD for developing calculations Proficient in RISA suite, for completing structural analysis independent of MBS Advanced knowledge of engineering codes and standards (ACI, AISC, ASCE7, etc)

Job Description SUMMARY: Service, repair and overhaul aircraft to ensure airworthiness. Works under moderate supervision to learn and perform basic tasks associated with aircraft maintenance. Advances through on-the-job training to regularly perform more challenging tasks and achieve greater compensation. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Position reports to Director of Maintenance, • Repair, modify, replace or otherwise perform routine aircraft maintenance work in a safe and timely manner., • Accurately completes required maintenance-related paperwork or utilize maintenance tracking software., • Communicate effectively with other maintenance personnel at all levels by keeping co-workers and leadership apprised of work progress and difficulties as they arise., • Complete on-the-job-training (OJT) forms and any required reading in a timely manner., • Access and correctly follow instructions published in aircraft maintenance manuals., • Help with general cleanup of work area and monitoring time on assigned tasks., • Responsible for accurately clocking into jobs and monitoring time on assigned tasks., • Perform other duties as assigned such as: aircraft movement, customer service, be a positive representation of PlaneSmart’s maintenance team when regulatory authorities are present (FAA, DOT, TSA, etc.), • QUALIFICATION REQUIREMENTS; SKILLS AND KNOWLEDGE:, • Demonstrate a desire and ability to learn new tasks., • Regular and consistent attendance., • Good verbal and written communication skills with extreme attention to detail., • Computer literacy: Microsoft office, email client, maintenance tracking software: TRAXXAL & CAMPS (preferred)., • Ability to communicate effectively with other maintenance personnel at all levels regarding job related issues., • Ability to work with or learn to work with basic tools and mechanical systems., • Meet all regulatory requirements per 14 CFR Part 65., • Be able to read, write, speak and understand English. EDUCATION AND/OR EXPERIENCE: • High School education or equivalent, • FAA Airframe or Powerplant license REQUIRED, • 1+ years aviation maintenance experience preferred fXTmkjEmkH

Job DescriptionDescription: Airframe and Powerplant Instructor Thrust Institute of Maintenance (TIM) is seeking a highly skilled and knowledgeable Airframe and Powerplant (A&P) Instructor to join our esteemed faculty team. As an A&P Instructor, you will play a pivotal role in shaping the future of aviation by imparting your expertise and passion for aircraft maintenance to aspiring professionals. Teaching & Professional Obligations: • Interacting with students to provide opportunities to learn, creating conditions that facilitate learning, and using techniques and methods that create a high probability that learning will occur., • Instructional Delivery: Providing clear communication of information and promoting learning through an effective learning environment., • Instructional Design: Designing, sequencing, implementing, and presenting experiences which promote student learning, and designing, developing, and implementing tools, technologies, and procedures for assessing student-learning outcomes., • Collaborate in the development and implementation of diagnostic, formative, and summative assessments of learning for students., • Provide effective and high-quality instruction of subject being taught., • Apply learning-centered educational practices such as creating and communicating clearly-defined outcomes for student learning., • Provide a diverse array of learning activities that directly tie to those defined outcomes., • Use assessment data to improve instruction and learning, and participate in an ongoing Campus-Wide dialogue about teaching and learning., • Develop and refine department curriculum as necessary to maintain currency in pedagogy and content, • Adopt new teaching methodologies as appropriate., • Implement department, division, and/or institutional goals as assigned., • Maintain office hours, turn in grades on time, meet assigned classes., • Submits course syllabi and other required documents on time., • Manages the classroom facility., • Keeps accurate attendance and grade records., • Endeavors related to a faculty member’s teaching assignment that contribute to the discovery, dissemination, and practical application of knowledge and/or skill., • Acquire and/or maintain certification., • Attend conferences, workshops, and/or training appropriate to one’s field., • Complete coursework related to one’s teaching assignment., • Create teaching methodology and instructional design., • Other activities that contribute to keeping current in the content field., • Helping the school meet the goals and objectives of its mission and strategic plan., • Provide competent advising to students seeking program certificates., • Fulfill school service requirements by making meaningful contributions on campus and/or to community service groups., • Participate in institutional and departmental recruitment and retention activities. Assist in the evaluation and selection of textbooks and other resources and materials in one’s assigned area., • Serve on department, division, and institutional committees., • Assist in program and curriculum review, revision, and the development and assessment of learning., • Maintain classrooms and/or labs., • One (1) year of teaching experience at a FAA Part 147 Aircraft Maintenance Training School or an Aviation CTE Program or Military Aircraft Maintenance Training Program., • Hold a current FAA Part 65 Airframe and Powerplant certificate., • Ability to teach using methodologies that support a student-centered learning environment., • Computer literacy and the ability to use computer technology in classroom/lab instruction., • A willingness to take classes in teaching methods, curriculum development, computer applications or other coursework deemed necessary by the A&P Chief, Executive Director, or Academic Dean., • Associate's Degree in Aviation Maintenance or another related field., • Experience teaching and supporting traditionally under-served student populations., • Cover Letter, • Resume, • Teaching Philosophy, • Copy of Unofficial Transcripts (Official Transcripts will be Required Upon Hire)

Job Description We are seeking an experienced Aerospace Engineer with a Bachelor's degree in Aerospace Engineering or related Engineering field. In this challenging, fast-paced environment, you'll have the opportunity to apply your knowledge and experience to design and create the most groundbreaking aerospace and defense technologies - those that exist today and those that will shape tomorrow. Do you love bringing "out-there" ideas to life? We are innovators on a mission to unite, explore and inspire. As a thermal modeling focused aerospace engineer, you will research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a wide range from advanced mission payloads and electronic systems through highly integrated aircraft. You'll develop complex aerodynamic components, structures, and systems. Your technical duties involve the design and development, analysis, and test of new products and processes throughout the product lifecycle. Job responsibilities for this position will include: • You will analyze and troubleshoot complex aircraft interior heat-transfer models, heat exchanger flow paths, and exhaust plume impingement problems within the NC3 business area., • You will plan, schedule, execute, and report thermal analysis campaigns for transport-category aircraft to support other engineering disciplines., • You will review and compile results from the analysis team and present findings and results to internal teams, leadership, and customers., • You will work with the flight test and ground test teams to plan and reduce data from aircraft testing to validate the analysis models and/or show compliance to certification criteria. Skills: • Must-haves:, • Knowledge of engineering principles and practices, • Experience using Computational Fluid Dynamics (CFD) tools to analyze aerodynamics and heat transfer problems for aerospace vehicles, • Experience analyzing free- and force-convection heat-transfer models for aerospace vehicle interiors, • Successful execution of thermal analysis in support of 14 CFR Part 25 Type Certification (TC) or Supplemental Type Certification (STC) or programs, • Understanding of Computer Aided Engineering tools and Finite Element Analysis (FEA), • Experience working in multi-disciplinary design and development teams, • Ability to obtain/maintain secret clearance, • Preferred:, • Familiarity with testing to support thermal analysis model verification and validation, • Background in the Aerospace and Defense Industry, • Understanding of system-level static and dynamic modeling and simulation, • Experience with Siemens STAR-CCM+ and/or FLOEFD preferred Bachelor's of Science degree in Aerospace Engineering, Mechanical Engineering, Physics, or other related discipline and typically 6 or more years of relevant experience

Job Description Aerospace Quality Research and Development-145 Job Description: Technician Level 2 Classification: Non-Exempt Pay: Hourly, plus benefits Shift: 6:00 a.m. to 2:30 p.m. (overtime, as needed) Reports To: Repair Station Manager Required Education and Experience: • 3 years+ hands-on commercial and/or corporate aircraft, or Part 145 Repair Station experience, required., • Line maintenance experience on multiple airframes within a Part 121 or Part 135, a plus., • Strong understanding of Federal Aviation Regulations, Airworthiness Directives, Service Bulletins, and other FAA approved or acceptable data and its usage, required., • Expertise in sheet metal repair, composite, and bonded parts to determine scope of work required, and materials required, with skill to accomplish proper repair, required., • Flexibility to work changing shifts including on-call/AOG coverage to include nights and weekends; on as-needed or short notice basis, required., • Communicate effectively with other maintenance personnel at all levels by keeping co-workers and leadership apprised of work progress and difficulties as they arise., • Installation of aircraft fasteners is required (rivets, cherry rivets, hi-loks, etc)., • Responsible for executing work in accordance to task requirements and in line with AQRD’s Repair Station procedures and requirements, ensuring compliance to FAA/EASA or other applicable regulations, and in so doing delivering efficient high-quality work with safety being their uncompromised priority;, • Ensure all work is conducted in accordance with Company policies and all applicable regulatory requirements., • Must adhere to all safety standards established by the Company and regulatory agencies., • Perform work on customer aircraft or articles as requested., • Ensure all repair requests are served in a timely and efficient manner., • Ensure all technical data referenced for repairs is available and current., • Interpret technical manuals, figures and drawings, as needed., • Comply with Quality Assurance requirements as established in the RSMQCM, including accuracy of documentation such as materials used, calibrated tools used, and labor clocked to work orders., • Consistently deliver excellence in job execution as an individual as well as a team player, ensuring high quality and efficient workmanship for on-time re-deliver of aircraft and/or aircraft components, • Ensure the work area and hangar is kept to the highest standards of safety and cleanliness., • Always maintain a neat and clean work area conducive to employees’ well-being and safety., • Report any incident immediately to the Quality & Safety Manager in accordance with company policies and procedures., • Work is performed in and around an aviation hangar at an airport (attached to an office building); at times, the hangar may be hot/cold/dusty/load), • Must be able to fluently read, write, speak, and understand the English language., • Must possess a valid Texas Driver’s License, with ability to drive on occasion to pick up or deliver a customer’s part., • Ability to stand for most of shift., • Frequently moving items, opening boxes system., • Ability to lift, push/pull cart or parts and carry up to 25 lbs;, • Ability to climb a ladder., • Ability to become certified on a forklift., • Read, write, and count accurately., • Proficient in Microsoft Suite applications and ability to become efficient in company technology and software programs., • Communicates in business-like manner with others within the company, and on behalf of the company., • Must have strong interpersonal and collaboration skills., • Must have accurate and legible written and oral communication skills., • Possess a drive/passion for the aerospace industry., • High level of drive to grow within the repair-engineering world and the company., • Works as a team member, highly organized, work well under stress and handle multiple priorities., • Must be self-motivated, conscientious and the ability to prioritize multiple tasks., • Strong organization skills., • Punctual and reliable attendance is required., • Accurate data entry is required., • Ability to complete work efficiently and meet deadlines., • Perform well under general supervision.

Job DescriptionDescription: Cutter Aviation is searching for an energetic and knowledgeable Shares Ownership & Managed Sales Executive. The position will function as the primary face of Cutter Aviation and must be an exceptional relationship builder with the drive to provide world-class customer service. As the external representative of our company. The individual will seek to firmly establish Cutter and themselves as the target market’s first choice for charter and aircraft management services. KEY DUTIES AND RESPONSIBILITIES • Use a computerized flight scheduling system to understand aircraft availability, • Maintain positive relationships with owners and clients and managed customers, • Direct contact with clients and owners, • Develop and negotiate aircraft management contracts for Part 135 and Part 91 Fleets., • Develop and build working relationships with new and existing customers in order to understand their requirements for aircraft ownership and management., • Develop, implement and refine an effective marketing strategy., • Prepare and deliver comprehensive responses to Requests for Proposal (RFP)., • Develop Sales campaigns based on market characteristics., • Work with the company President and Flight Manager to formulate and coordinate programs to promote services., • Represent the company at trade exhibitions and networking events., • Monitor industry trends that may affect business strategies., • Stay up to date on competitor activity to identify business opportunities., • Promote and sell charter block-time products., • Must have experience in the sale of aircraft and/or charter services., • Must have experience in the listing and selling of turbine powered aircraft., • Must have experience in negotiating sales contracts, agreements and partnerships., • Must demonstrate good judgment in balancing the needs of the customer with the needs of the company., • Proven ability to interact in a team environment and work effectively with peers to accomplish objectives., • Must be a self-starter able to operate with minimal supervision., • Excellent oral and written communication skills., • Proven ability to manage concurrent projects and prioritize objectives, maintain focus and demonstrate a results-oriented work ethic., • Must be willing to travel (approximately 25-50%), • Must have strong computer skills, • Must be detailed oriented, organized and possess the ability to multitask under pressure of deadline, • Possess proven skills in developing and maintaining customer relationships, • Professional in appearance and mannerisms, • Able to develop a friendly rapport, • Have a sincere desire to assist customers, • Active listening skills., • Must possess a sense of urgency and the ability to meet critical timelines., • Must be self-motivated and be able to work with little or no supervision and to be able to see "the big picture" with respect to efficiency and profitability., • Able to pass a drug screening test, • Able to pass a background check, • Attendance and Dependability: Employee must report to work at the scheduled time and seldom be absent or late. Employee must be able to complete work in an accurate, timely, thorough manner and be conscientious about assignments. Routinely exhibits a sense of urgency to get the job done., • Communication and Contact: Employee must communicate effectively both verbally and in writing with customers, colleagues and superiors. Must maintain strict confidentiality when dealing with sensitive information. Must be friendly, courteous and helpful at all times., • Relationship with Others: Employee must work effectively and relate well to others including superiors, colleagues and customers. Must consistently exhibit a positive and professional attitude when interacting with others. Must maintain constructive working relationships and seek to promote good employee morale., • Meeting Business Goals and Objectives: Employee must be able to set goals and objectives for themselves and to meet or exceed goals set by senior management.

Job DescriptionSummary A Procurement Specialist / Buyer with Coupa experience is responsible for end-to-end procurement within the Coupa Procure-to-Pay system, managing purchase orders, supplier relationships, and compliance, while identifying cost-saving opportunities. Headquartered in Plano, Texas, Atlantic Aviation welcomes customers at more than 100 fixed base operator (FBO) locations – from the Hawaiian Islands to Caribbean islands and all points in between throughout the US. We offer a wide range of aircraft ground handling and flight hospitality services, including fueling and line services, hangar and ramp storage, modern executive terminals for passengers and crews, and much more. We are firmly committed to diversity, equity, and inclusion throughout our network and aspire to be the employer of choice in our dynamic segment of aviation. We invest in enhancements to our safety, service, technology, and strategic infrastructure in order to provide more choices, improved experiences, and better value for customers. Atlantic Aviation intends to lead the way to a more sustainable future for business and general aviation. Atlantic Aviation is “local everywhere” - providing a safe, friendly, and familiar experience across North America. To learn more about Atlantic Aviation or to make a reservation at any of our 100+ FBOs, visit AtlanticAviation.com. Website • Procurement Management: Create, review, and process purchase requisitions and purchase orders in Coupa., • Supplier Coordination: Source products and services from approved suppliers, ensuring compliance with contracts, and resolve discrepancies or delays., • Workflow Oversight: Manage approval workflows in alignment with procurement policies, including punch-out orders and non-catalog requests., • Invoice and Payment Support: Collaborate with Accounts Payable to resolve invoice issues and maintain accurate records within Coupa., • Data Maintenance: Keep Coupa master data (supplier records, contract details) current and accurate., • Training and Guidance: Provide end-user support and training on Coupa best practices., • Cost Optimization: Support sourcing initiatives with category managers to identify cost-saving opportunitiesNothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time.Required SkillsEducation & Qualifications:, • Bachelor’s degree in Business, Supply Chain, Procurement, or a related field is preferred., • 2–5 years in purchasing/procurement, • Coupa experience is required, • Technical Skills: Advanced proficiency in Microsoft Excel, PowerPoint, Word; familiarity with BI tools such as PowerBI is advantageous, • Analytical Abilities: Strong mathematical, analytical, and problem-solving skills, with attention to detail, • Communication: Excellent interpersonal, leadership, and communication abilities to interact with suppliers and internal teamsPreferred Certifications and Experience, • Coupa Certifications: Coupa Buyer and/or Coupa Admin certification is a plus, • Indirect Procurement Exposure: Experience in IT, marketing, professional services, or facilities procurement enhances candidacy, • ERP Systems: Knowledge of systems such as Great Plains, SAP, Oracle, or other ERP platforms alongside Coupa may be beneficial

Job Description Welcome to Four Corners, where we are redefining private aviation. As a dynamic new force in the industry backed by deep aviation roots, we offer a comprehensive suite of services, including Aircraft Management, Charter, and our innovative Freedom™ program—corporate jets as a service. Four Corners is committed to offering personalized solutions that meet the highest standards of safety and customer care, setting new benchmarks for the industry. Our tagline, Be There™, embodies our mission to deliver unparalleled convenience and reliability – Four Corners allows you to simply Be There, and we take care of the rest. Our Company Values are deeply held and distinctly evident in everything we undertake. • Teamwork: Collaborate with a dynamic team that values each member's contributions and works together to achieve common goals., • Stewardship: Take pride in making decisions that uphold values of integrity and ethics and being responsible with customers' time., • Community: Be part of a supportive community that fosters growth, learning, and mutual respect., • Excellence: Strive for excellence in everything you do, from client interactions to innovative solutions., • Abundance: Embrace a mindset of enthusiasm and passion, where opportunities for growth and success are limitless., • Customer Obsession: We put our clients at the heart of everything we do, ensuring their needs are met with the highest standards of service. If you're driven by a passion for aviation and a dedication to client service, Four Corners offers an exciting opportunity to be part of a forward-thinking team. We seek talented individuals eager to contribute to our mission and grow with us. Ready to make your mark in private aviation? Apply today and experience what it means to truly Be There™ with Four Corners. POSITION SUMMARY: The Pilot-in-Command reports to the Chief Pilot regarding Company policies and procedures. Duties will involve FAR Part 135 operations as part of a crew. The Pilot-in-Command has the following responsibility for safe transportation of passengers, crewmembers, and cargo during all aircraft operations. He / She may delegate duties but not the responsibility of those duties. To serve as Pilot-in-Command in any aircraft he/she must hold an Airline Transport Pilot Certificate with the appropriate category and class rating and be qualified for their assigned position. Candidate must be located within 90 minutes of Addison, TX. Local candidates highly preferred. If not currently local, relocation to the Addison, TX area is required for this position. QUALIFICATIONS: (Minimum Requirements) • FAA Airline Transport Pilot Certificate, • Lear45 Aircraft type rating highly preferred, • Current First Class Medical, • 3500 hours total time, • 1500 hours PIC turbine, • Strong CRM Skills, • Must be legal to work in the U.S. and ability to travel any international destination, • Must be enrolled in an FAA/DOT Drug & Alcohol Program, • Pass a TSA Criminal History check DUTIES & RESPONSIBILITIES: • Final authority to operate the assigned aircraft., • Authority to delay, cancel or discontinue a flight when, in his / her opinion conditions are unsuitable for the initiation or continuation of the flight., • Authority to indicate a change in the planned flight during the flight when, in his / her opinion, such a change is appropriate for the safer operation of the aircraft., • Respecting aircraft performance (i.e., takeoff, en-route, landing, special operations, mountainous airports, etc.), Flight Crewmembers shall strictly adhere to Company operating policies and procedures so as to mitigate the potential of controlled flight into terrain (CFIT)., • Responsible for flight planning taking into account:, • The suitability of the weather,, • Routing,, • Airports, traffic conditions,, • Airway facilities along the route to be flown,, • Aircraft performance., • Responsibility to ensure that a flight initiated is completed as planned., • Institute all necessary changes as required by en-route conditions such that the flight may continue under appropriate procedures and rules., • Responsible for conducting the flight in a safe and prudent manner in accordance with the, but not limited to, the following items:, • Reviewing and reporting the maintenance status of each aircraft., • The conduct of a proper preflight inspection in accordance with the approved Airplane Flight Manual or accepted preflight checklist., • A complete check of weather and facilities along the route to be flown and airport to be used., • Ensure the flight is conducted in accordance with the policies and procedures of this Manual, the Operations Specifications and applicable Federal Aviation Regulations., • To determine that weight and balance procedures are followed, and that the gross weight and CG of the loaded aircraft are within limits for operation., • Ensuring the safety of passengers, aircraft and crew., • Accurate completion of all trip paperwork in accordance with current procedures., • The Pilot-in-Command must adhere to the Certificate Holders directions and instructions, and compliance with all operations specifications, regulations and policies set forth in this manual with regard to operational control under Part 135. Failure to do so by the PIC may result in legal action by the FAA., • The Pilot-in-Command must carry out his/her duties and responsibilities in a "professional manner" at all times. The Pilot-in-Command sets the example for all crewmembers with regards to proper conduct, appearance, alertness, discipline, adherence to policies and procedures and standards. The PIC is expected to have open communication, and to be receptive to input from all crewmembers, toward the shared goal of a safe flight operation., • Comply with all regulatory, operations specifications and policies and procedures in this manual., • Being a Pilot in Command requires to have FAA/DOT Part 120 Pre-Employment drug test, and enrolled in the random drug and alcohol testing program., • The Pilot-in-Command will report any and all flight interruptions to the Company. These must be reported prior to the next departure., • Other duties as assigned by the Chief Pilot.

Job Description Clear Star Aviation Position Description Regional Sales Manager Position Description Clear Star Aviation is seeking a Regional Sales Manager to grow scheduled maintenance and AOG services for both general aviation and turbine aircraft. The Regional Sales Manager will be responsible for seeking new prospects, creating relationships, working up quotes, and scheduling jobs. The Regional Sales Manager will support the customer’s experience from start to finish. Responsibilities The Regional Sales Manager is responsible for: • Develop new business through visiting, calling, and emailing prospective clients, • Deliver presentations to promote company brand and services, • Meet established sales goals, • Host clients at our maintenance facilities or other locations, • Prepare a draft quote and schedule service, • Be the primary point of contact for the client throughout the repair, • Identify market trends and make suggestions for untapped areas of opportunity, • Coordinate with marketing team on strategy and materials development, • Provide routine and timely updates to the CEO and DOM Experience • Possess previous sales experience at an MRO facility or equivalent, • Must have technical understanding of turbine aircraft. Hands-on technician experience is a plus., • Previous experience with maintenance tracking software and customer relationship management (CRM) software is helpful, • The ideal candidate will bring a background in aviation maintenance and an established list of industry contacts to hit the ground running Skills • Must possess excellent organizational and computer skills, • Must be goal-oriented, have exceptional attention to detail, and work well independently and with a team Education • Bachelor’s degree or equivalent work/life experience GmHDMWXcUL

At Surf Air Mobility, we're transforming air mobility.As innovators in aviation, we are at the forefront of creating a more efficient and accessible flying experience.With our commitment to a customer-first approach, advanced software solutions, and electrification, we're pioneering new ways for peo

Aviation Electronics, Electrical, and Computer Systems Technicians (AV) work with some of the most advanced aircraft systems in the world. Troubleshoot and repair complex aircraft systems, including digital computers, fiber optics, infrared detection, radar, and laser electronics. AV technicians ser

Headquartered in Atlanta, Georgia and founded in 1993, Precision Aviation Group (PAG) is a leading provider of maintenance, repair, and overhaul (MRO) and value-added supply chain services to the aerospace and defense industries.With 25 FAA-approved repair stations, 27 locations worldwide, 1,100+ em

Airframe and Powerplant Instructor. Thrust Institute of Maintenance (TIM) is seeking a highly skilled and knowledgeable Airframe and Powerplant (A&P) Instructor to join our esteemed faculty team. As an A&P Instructor, you will play a pivotal role in shaping the future of aviation by imparting your e

Service, repair and overhaul aircraft to ensure airworthiness.Works under moderate supervision to learn and perform basic tasks associated with aircraft maintenance.Advances through on-the-job training to regularly perform more challenging tasks and achieve greater compensation.ESSENTIAL DUTIES AND

This role is built for experienced General Aviation technicians who know piston powered aircraft inside and out and take pride in delivering safe, precise, and compliant maintenance work.

Job DescriptionDescription: The A&P Mechanic is responsible for performing scheduled and unscheduled maintenance on aircraft while complying with company and FAA rules and regulations. Responsibilities: • Perform scheduled and unscheduled maintenance tasks as directed by the Lead Mechanic., • Comply with all company rules and regulations regarding industrial safety., • Complete assigned maintenance tasks in accordance with standard practices and procedures established by the Lead Mechanic and relevant manuals., • Maintain equipment, tools, and the workplace in a clean and organized fashion., • Perform job functions with the highest standards of safety, quality, and efficiency.Requirements:, • Minimum of 5 years of experience with piston-powered, General Aviation aircraft, • Comprehensive knowledge of Federal Aviation Regulations., • Ability to read and interpret aircraft diagrams, charts, and schematics., • Proficiency in using computerized aircraft maintenance programs and manuals., • Quantum MX proficiency is a plus., • Able to perform routine maintenance and troubleshooting., • Must demonstrate organizational and interpersonal skills., • Must be a team player., • Candidates must possess their own tools and reliable transportation., • Airframe and Powerplant (A&P) certificate, • Inspection Authorization (IA) preferred, but not required.

Introduction At Gallagher, we help clients face risk with confidence because we believe that when businesses are protected, they’re free to grow, lead, and innovate. You’ll be backed by our digital ecosystem: a client-centric suite of consulting tools making it easier for you to meet your clients where they want to be met. Advanced data and analytics providing a comprehensive overview of the risk landscape is at your fingertips. Here, you’re not just improving clients' risk profiles, you’re building trust. You’ll find a culture grounded in teamwork, guided by integrity, and fueled by a shared commitment to do the right thing. We value curiosity, celebrate new ideas, and empower you to take ownership of your career while making a meaningful impact for the businesses we serve. If you’re ready to bring your unique perspective to a place where your work truly matters; think of Gallagher. Overview AssuredPartners Aerospace is hiring for an Account Manager. As experts in protecting what matters most to businesses and individuals, we’re looking to bring on our next Account Manager to support our Aviation department and deliver exceptional risk management solutions to our growing client base. AssuredPartners is a leading insurance brokerage that prides itself on delivering more than insurance expertise. Our teams provide the highest level of service, tailored solutions, and forward-thinking risk management strategies that truly set us apart. With a culture based on integrity, collaboration, and technical excellence, we are proud to offer our clients, and our employees, the very best in the insurance industry. As part of Gallagher, you will be joining a team that delivers more than policies; you will provide proactive risk management consulting, innovative solutions, and an unmatched level of client service. How you'll make an impact Primary focus is retention of existing customers in accordance with agency policies and procedures. Must interact with underwriters at multiple insurance companies by phone and email to obtain insurance quotes and issue renewal policies. Outbound efforts include contacting customers to gather additional information, responding to internet requests for quotes, and following up on quoted but not renewed customers. Explain insurance coverages and offer insurance advice to prospective and existing customers. Maintains records according to Agency standards, ensures that procedures are properly followed and that information ins properly documented and readily accessible. Assists in the development of strong personal relationships with insurance carrier personnel. Responsible for meeting individual and team monthly sales and quality goals while working in a team environment. Dedicates time to personal professional and job competency development. Completes continuing education requirements to maintain required Property/Casualty insurance license. About You Required: Bachelor's degree with 0+ years client service and/or claims management experience -OR- High School degree/GED with 3+ years client service and/or claims management experience. P&C License. Proficiency in Microsoft Office. Appropriate licensing as required. Preferred: Previous insurance knowledge and experience managing client relationships. Solid financial acumen. Behaviors: Proficient in using technology as a tool to maximize productivity and quality. Strong written and verbal communication skills. Comfortably engages others in consultative discussion. Effectively manages/balances multiple and sometimes competing priorities. Works in a self-directed manner. Compensation and benefits We offer a competitive and comprehensive compensation package. The base salary range represents the anticipated low end and high end of the range for this position. The actual compensation will be influenced by a wide range of factors including, but not limited to previous experience, education, pay market/geography, complexity or scope, specialized skill set, lines of business/practice area, supply/demand, and scheduled hours. On top of a competitive salary, great teams and exciting career opportunities, we also offer a wide range of benefits. Below are the minimum core benefits you’ll get, depending on your job level these benefits may improve: • Medical/dental/vision plans, which start from day one!, • Life and accident insurance, • 401(K) and Roth options, • Tax-advantaged accounts (HSA, FSA), • Educational expense reimbursement, • Digital mental health services (Talkspace), • Flexible work hours (availability varies by office and job function), • Training programs, • Gallagher Thrive program – elevating your health through challenges, workshops and digital fitness programs for your overall wellbeing, • Charitable matching gift program We value inclusion and diversity ___ to review our U.S. Eligibility Requirements Inclusion and diversity (I&D) is a core part of our business, and it’s embedded into the fabric of our organization. For more than 95 years, Gallagher has led with a commitment to sustainability and to support the communities where we live and work. Gallagher embraces our employees’ diverse identities, experiences and talents, allowing us to better serve our clients and communities. We see inclusion as a conscious commitment and diversity as a vital strength. By embracing diversity in all its forms, we live out The Gallagher Way to its fullest. Gallagher believes that all persons are entitled to equal employment opportunity and prohibits any form of discrimination by its managers, employees, vendors or customers based on race, color, religion, creed, gender (including pregnancy status), sexual orientation, gender identity (which includes transgender and other gender non-conforming individuals), gender expression, hair expression, marital status, parental status, age, national origin, ancestry, disability, medical condition, genetic information, veteran or military status, citizenship status, or any other characteristic protected (herein referred to as “protected characteristics”) by applicable federal, state, or local laws. Equal employment opportunity will be extended in all aspects of the employer-employee relationship, including, but not limited to, recruitment, hiring, training, promotion, transfer, demotion, compensation, benefits, layoff, and termination. In addition, Gallagher will make reasonable accommodations to known physical or mental limitations of an otherwise qualified person with a disability, unless the accommodation would impose an undue hardship on the operation of our business.

Join a nationally recognized flight school with over 80 years of excellence as an Aviation Operations Assistant Manager. This pivotal role offers you the opportunity to dive deep into all facets of our flight training operations, setting you up for success and potential future advancement to a schoo

We're looking for a high-caliber instructor to grow with us—someone who delivers world-class training, connects with our clientele, and thrives in a premium environment. Certified Flight Instructor – Instrument (CFII) –. Flight Instructor – Addison Airport (KADS).

Nationally recognized flight school in business for over 80 years seeks Assistant Aviation Operations Manager. Our Assistant Operations Manager provides support to our customer service, sales, flight instructors, and maintenance staff in order to ensure the continued success of our students and empl

SafeTech USA is a trusted leader in aircraft safety and maintenance services.As part of the SK AeroSafety Group, we specialize in the inspection, repair, and overhaul of critical aviation safety components including fire suppression systems, oxygen assemblies, and emergency evacuation equipment.Our

Job Description Do you love the sound of jet engines and enjoy working around food? We are seeking a detail minded people person to jour our catering team. Shift is 2 pm. to 10 p.m., but there will be some evenings when overtime is necessary to complete the days work; there will be rotating weekend work as well. Responsibilities include but not limited to: • Monitor email and answer phone to receive orders and answer inquiries, • Attention to detail is a must as most of our orders are "custom", • Provide information about our services, • Develop a rapport with our clients, • Act as a liaison between client and kitchen staff, • Previous experience in customer service, • Ability to develop a rapport with clients, • Ability to multitask, • Excellent written and verbal communication skills, • BIlingual English and Spanish is a plus, • Foodie type knowledge is a plus, • Aviation knowledge is a plusCompany DescriptionWe provide catering for elite clientele to enjoy while traveling to their next destination.We provide catering for elite clientele to enjoy while traveling to their next destination.

Flight Instructor Addison Airport (KADS). Were looking for a Cirrus instructor whos not only sharp, safe, and professionalbut also personable, energetic, and passionate about making the flight training journey something clients genuinely enjoy. Were looking for a high-caliber instructor to grow wit

Certified Flight Instructor Instrument (CFII) Requi. Flight Instructor Addison Airport (KADS). Were looking for an instructor whos not only sharp, safe, and professionalbut also personable, energetic, and passionate about making the flight training journey something clients genuinely enjoy.

Job DescriptionThis role will be part of the Commercial team at Atlantic Aviation. She/He is responsible for supporting Commercial efforts by owning and optimizing the pricing and go-to-market strategy for all rent products and tenant real estate, including establishing and communicating targets, supporting the field GMs in identifying, targeting, and negotiating with prospects and existing customers on renewals, overseeing all field and Executive reporting on tenant rent and owning centralized external communication. He/she will maintain consistent relationships with key aircraft management contacts to shorten the sales cycle for tenant space and ensure visibility into upcoming space needs and development opportunities. She/he will require both the strategic vision to be able to develop the go-to-market strategy for our real estate as well as the interpersonal skills required to engage with both customers and field managers to optimize our pipeline and real estate footprint. He/She will serve as centralized point of contact for network customers with respect to real estate needs. The individual will report to the VP Yield Management and Customer Strategy but will also work alongside different layers of the organization, e.g. Director of Revenue Management, CCSO, COO, the sales teams, field GMs and ADs, Finance teams, etc. The Atlantic Aviation team is agile and collaborative, we align to make cross-functional strategic decisions; the ideal candidate fits seamlessly into our performance driven culture. Position will be located in Plano, TX. Headquartered in Plano, Texas, Atlantic Aviation welcomes customers at more than 100 fixed base operator (FBO) locations – from the Hawaiian Islands to Caribbean islands and all points in between throughout the US. We offer a wide range of aircraft ground handling and flight hospitality services, including fueling and line services, hangar and ramp storage, modern executive terminals for passengers and crews, and much more. We are firmly committed to diversity, equity, and inclusion throughout our network and aspire to be the employer of choice in our dynamic segment of aviation. We invest in enhancements to our safety, service, technology, and strategic infrastructure in order to provide more choices, improved experiences, and better value for customers. Atlantic Aviation intends to lead the way to a more sustainable future for business and general aviation. Atlantic Aviation is “local everywhere” - providing a safe, friendly, and familiar experience across North America. To learn more about Atlantic Aviation or to make a reservation at any of our 100+ FBOs, visit AtlanticAviation.com. Website • Work closely with the Revenue Management team to establish and maintain base/ product level real estate target rates, balancing the occupancy rates and pipeline demand, • Develop and maintain a go-to-market engine for efficiently identifying and externally showcasing available space within the network, • Establish customer-facing function for centralizing space inquiries and addressing customer needs comprehensively, including owning the Real Estate content on the website., • Maintain ongoing contact with customers and management companies to efficiently address available space within the network and proactively prepare for their upcoming aircraft deliveries or customer relocations, • Assist General Managers and Area Directors in identifying potential customers to support business cases for new construction, working closely with the Business Development team, • Maintain awareness of Business Development projects and timelines to support new opportunities and communicate about upcoming development, • Interact with GMs on a regular basis to ensure Use & Occupancy agreement renewals are handled in accordance with best practices and in line with targets, • Advise on GM reporting requirements to ensure tools and visuals continuously drive toward stated goals and support the overall real estate strategy, • Function as point of contact for Strategic Account static display planning and liaison with GMs, • Support GMs in successfully managing and pricing non-aircraft hangar usage (i.e. events, filming, etc.), • Work closely with sales team members to support real estate needs for their owned accounts, • Collaborate with GMs, Commercial, and Finance teams to set rent product budgets and ensure execution to meet and exceed annual targets.Required Skills, • The ideal candidate is intellectually curious, analytical, technically savvy, operationally astute, performance-driven and highly collaborative. We seek an engaging team player who takes ownership of responsibilities with minimal supervision and consistently demonstrates integrity, responsibility, care, passion and innovative spirit., • Minimum 2+ years’ experience in FBO management preferred; established relationships with key clients or previous CRM experience a plus Proficient in Excel, Word and PowerPoint, internal reporting sources included PowerBI reports and JetStream database, • Skilled at reading and interpreting contracts, • Independent thinker and self-motivated worker with advanced planning, organization, critical thinking, decision- making, attention to detail, and communication skills, • May be required to travel to attend training/meetings, work with onsite personnel, or manage special projects

Job Description PlaneSmart! Aviation Position Description Line Services Technician Position Description Line Services is an essential role in PlaneSmart’s Operations Department that supports the readiness of PlaneSmart’s aircraft for flight. Line Services provides for aircraft preparedness and positioning to streamline operations for both Part 135 and 91 trips. Reporting Director of Maintenance Responsibilities • Monitor the aircraft schedule throughout the day, • Plan and position aircraft for upcoming flights and maintenance, • Be available for departures and client needs, • Post flight inspections and checklist, • Check stock items after each flight, • Coordinate with Dispatch or Operations to ensure aircraft readiness for trips, • Clean and maintain interior and exterior of all aircraft, • Support facilities maintenance, • Hands-on experience working with a part 135 or part 91 aviation company, • Demonstrate an understanding of the position expectations and requirements, • Experience working with a team, • Mechanically inclined, • “Can do” attitude with willingness to work in multiple areas of the company, • Able to work outside or inside in a physical capacity, • Takes the initiative to communicate trouble spots to management, • Able to communicate in a team environment, • Working knowledge of Microsoft Office and other basic computer skills, • Must pass a drug screen, • Must possess a driver’s license Powered by JazzHR mtMGcKSNjI

Job Description Who Are We VEC is a leading construction technology services provider that is at the forefront of innovation in the construction industry, delivering cutting-edge technology solutions that revolutionize the way construction projects are designed and built. Our Mission is to challenge the status quo and reshape the way we plan, design, and construct the built world so Humanity can thrive sustainably. We partner with contractors, engineers, and developers/owners across the US and deploy our team of construction and technology professionals to improve project delivery. We support large projects across many sectors of the industry: Data Centers, Healthcare, Life Sciences, Tech, Education, Transportation, Aviation, Commercial Office Space, and Public Works. We love what we do, our VECommunity, and helping the best build better. Overview As a Survey/3D Laser Scanning Technician, you will be responsible for performing and documenting visual observations, maintaining continuity between office and field teams, and utilizing technology to ensure quality control of the installation process. You will work closely with field crews, foremen, superintendents and project managers to ensure constructability, accuracy, and seamless execution of the project. What You Will Do Documentation and Reporting Key Responsibilities Documentation and Reporting • Organizing and managing all project-related data in one centralized location for consistency and convenience, • Creating a streamlined and organized system to ensure project teams have access to accurate, real-time information, • Perform unbiased third-party observations at all stages of construction to ensure proper installation techniques and compliance with project plans and requirements, • Identifying deviations from the project plans, design specifications and model, • Perform regular site walks with the 360 camera for documenting progress, completed work and highlight any issues, • Capture existing conditions with the 3D laser scanner, pre and post install, to identify discrepancies and potential issues, • Utilize a robotic total station (RTS) to support layout activities, • Operate UAS (drone) systems to capture aerial imagery of existing jobsite conditions for observation and analysis, • Working closely with project teams to streamline communication and operations, ensuring that information flows seamlessly between the office and the field, • Attend weekly meetings, present issues, and contribute to problem resolution, • Experience: 1+ years in construction, • Flexibility: Ability to travel for work for 2 weeks – 18 months at a time and/or ability to relocate, • Problem-Solving Mindset: Ability to identify and analyze issues and provide constructible solutions, • Technical Proficiency: Strong knowledge of Scan Registration software, Navisworks, Bluebeam, and Procore, • Coordination & Clash Detection: Understanding of multidisciplinary coordination efforts in BIM, • Communication Skills: Strong ability to collaborate with contractors, project managers, and field teams, • Industry Expertise: Familiarity with construction terminology and means and methods, • Candidates must reside within commuting distance to Garland, Texas., • The role is 100% onsite, no hybrid work schedules are available, • Collaborative environment (virtual or in person) with frequent team meetings and project briefings

Job Description Are you mechanically inclined with a knack for hands-on work? Do you enjoy a flexible schedule and working independently, but also have the support of a team? The Equipment Service Technician is a remote based Customer facing employee, primarily working inside hospitals. You will be responsible for troubleshooting and repairing medical equipment used in surgical procedures, as well as providing installation support on complex mechanical, electromechanical and electronic units. Individuals with experience working in HVAC repair, Mechanics, Maintenance, Refrigeration, Boilers, Chillers, Equipment Repair, Diesel and Automotive Repair, Aviation Repair, Plumbing, Electrical, etc. are often successful. Overnight travel up to 70%. Floater for the Region - covering TX, OK, KS, LA. Based in the Dallas area.What you will do as an Equipment Serice Technician: * Perform fundamental troubleshooting, repairs, and maintenance of STERIS and competitor equipment, systems and components. * Manage time effectively by prioritizing Customer and business needs and schedules autonomously to complete PM performance, service calls, warranty calls, equipment installations, field upgrade programs and other duties. * Work with cross functional teams (Tech Support, Engineering and Service Contract Management), to escalate issues appropriately and utilizes advanced technology platforms to complete compliance regulatory requirements and resolve and document troubleshooting issues. * The Technician will provide Customers with information, pricing and repair options. With management support, build relationships with Sales to drive Customer experience and revenue opportunities. Learn to identify sales opportunities in assigned territory. * Provide support to various locations within assigned territory depending on the service agreements and Customer needs. **Required: ** * High School Diploma or GED with 4+ years of work experience, with 2 of those years in a mechanical/technical role. Associates degree or related certifications in technical/mechanical area, competitive equipment training or related military experience may be considered towards technical experience requirement. * Valid driver’s license and the ability meet all required background and physical assessment elements to obtain and maintain existing and new vendor credentialing requirements. * Customer and team engagement experience. * Effective written and verbal communication skills. * Basic computer skills (MS windows/email, navigation, mobile app, and ability to data input into multi systems). * Must be able to travel up to 70% overnight. *Associates degree or related certifications in technical/mechanical area, competitive equipment training, or related military experience may be considered towards technical experience requirement.