Trabajos business process en Rochester, New YorkCrear alertas

Job Description Job Description Summary The Lead Electrician Operates, maintains and repairs distribution and emergency power systems. Installs, maintains and repair electrical wiring and switch distribution panels and outlet boxes. Perform conduit installation, wiring and equipment. Job Description Essential Functions • Provide a high level of expertise in maintaining the facilities critical electrical equipment. (I.e. emergency generator, high and low voltage panel board networking systems)., • Analyze project electrical needs and determine design., • Maintain hand and power tools in working order., • Carry out preventative maintenance program on a wide variety of complex electrical equipment., • Layout and install power circuits in operational sequence, and make all required electrical calculations, such as kilowatt draw and power circuit phase., • Maintain automatic controls, switchboard distribution centers, lighting circuits and flood lights., • Troubleshoot, tear down, disassemble, rewire, adjust, repair and replace electrical apparatus., • Make standard computation relation to load requirements of wiring and electrical equipment., • Respond to all types of electric emergencies., • Detect and report improper operation, faulty equipment, and unusual conditions., • Maintain work area in a clean and safe condition. Comply with CWS and OSHA Policies and Regulations., • Perform other duties as required., • Ensures assigned work tasks meet quality standards., • Promotes the development of quality improvements through the initiation of process improvements. Requirements • High School / Technical School Diploma / Military Trained Electrician, • Electrician License from local jurisdiction, • Must be well versed in the electrical codes and theory, • Minimum of five years working as an electrician, • Computer aptitude working with CMMS and BMS computerized systems, • Ability to read schematics, job instructions, and general correspondence, • Candidates must be able to successfully pass a background check, including criminal history., • C&W Services is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, sexual orientation, gender identity, protected veteran status or any other characteristic protected by law. This list is representative of those duties and responsibilities that are required of this position. However, the list is not to be considered as all inclusive. A supervisor or manager may assign other duties to meet mission requirements of CW Services and cooperation of all personnel is expected to carry out the mission. REQUIRED PHYSICAL ABILITIES Electrical work by its nature requires physical abilities to include lifting up to 50 lbs regularly. Full dexterity is required including bending, kneeling, twisting, fine motor skills with hands and fingers, full rotation of the head and neck. Ability to see, hear and be alert while operating equipment. Ability to operate lift equipment at heights of up to 45 feet and perform work safely utilizing extension and step ladders. Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate’s experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $31.00- $36.00 hourly \nCompany Description We manage all aspects of facility services for a client. We manage all aspects of facility services for a client.

Job DescriptionNow Hiring a Commercial Electrician Job Description Join a team specializing in commercial renovations and new construction projects. In this role, you'll install and maintain electrical systems while ensuring safe, reliable, and code-compliant installations. Responsibilities • Work on commercial renovation and new build construction projects, installing and maintaining electrical systems in commercial facilities., • Interpret and follow plans and blueprints provided by the general contractor to lay out and install conduit and wiring accurately., • Bend conduit and pipe and rough in conduit runs according to project specifications and electrical codes., • Run and pull wire for power distribution, lighting, heating, air conditioning, and refrigeration units., • Wire instruments and controls that manage power, lighting, and mechanical systems in commercial buildings., • Use power tools, including saws and drills, to cut, shape, and install electrical components and materials., • Operate and maintain testing tools such as ohmmeters and other test meters to verify proper operation and safety of electrical systems., • Utilize pipe threaders and conduit benders to fabricate and install conduit runs in a neat and code-compliant manner., • Read and interpret electrical blueprints and construction drawings to plan work and identify material and labor needs., • Provide and use your own basic hand tools and testing tools at the start of employment., • Follow all safety protocols and OSHA standards while working on active construction sites., • Collaborate in 2–4 person crews to complete tasks efficiently and support overall project timelines., • Maintain a clean and organized work area and ensure that installations meet quality and safety requirements., • Communicate effectively with crew members and site leadership regarding progress, issues, and material needs. Essential Skills • Experience working on commercial new build and renovation projects., • Ability to bend conduit accurately using conduit benders and related tools., • Strong blueprint reading skills to interpret electrical plans and construction drawings., • Comfort working in small crews of 2–4 people and coordinating tasks with team members., • Ability to provide personal basic tools and testing equipment at the start of employment., • Attention to detail and commitment to delivering neat, code-compliant conduit and wiring installations. Why Work Here? You join a well-established electrical contractor with strong relationships across the local construction market, providing stability and consistent, year-round work. You can count on a regular 40-hour workweek, supporting predictable income and work-life balance. You will receive a comprehensive benefits package, including full health benefits, a 401(k) with company match, paid holidays, and sick leave, creating a supportive environment for your long-term career and personal well-being. Work Environment You work in small crews of 2–4 people on commercial new build and renovation projects located locally in the Rochester area, minimizing long commutes and out-of-town travel. The standard schedule is first shift, Monday through Friday, from 7:00 AM to 3:30 PM, offering a consistent daytime work routine. The environment is an active commercial construction setting where you regularly use power tools, testing equipment, pipe threaders, and conduit benders, and follow OSHA safety standards throughout each project. Job Type & Location This is a Permanent position based out of Rochester, NY. Pay and Benefits The pay range for this position is $28.00 - $32.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Rochester,NY. Application Deadline This position is anticipated to close on Oct 7, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionJob Title: ElectricianJob Description Electricians will be responsible for roughing in conduit and wiring new commercial buildings based on plans and prints provided by the general contractor. They will terminate wires at switches, circuit breaker panels, and relays. Additionally, electricians will wire instruments that control the power, lighting, and heating units in buildings, and provide wiring for air conditioning and refrigeration units. The role involves using power tools, test meters, pipe threaders, and conduit benders. Responsibilities • Rough in conduit and wiring for new commercial buildings., • Terminate wires at switches, circuit breaker panels, and relays., • Wire instruments controlling power, lighting, and heating units., • Provide wiring for air conditioning and refrigeration units., • Utilize power tools, test meters, pipe threaders, and conduit benders.Essential Skills, • 5+ years of commercial experience in bending conduit or pipe and running wire., • Safety-oriented with OSHA certification., • Proficiency with saws, drills, utility knives, ohmmeters, and testing tools., • Experience with pulling wire, wiring, bending conduit, and working with 480V.Additional Skills & Qualifications, • Experience with 227V and 480V electrical systems., • Skills in conduit installation, wire pulling, pipe bending, and outlet wiring.Why Work Here? The company is team and family-oriented, valuing each employee and their contributions. It provides a 'no pressure' environment with respect for hard work and reliability. The company supports its employees in challenging situations, offering consistent work and opportunities for direct employment. Benefits include a 401k with matching, medical, vision, and dental coverage. Work Environment Hard hats and safety vests are provided. Employees must be able to climb ladders throughout the day. Communication is vital to ensure safety and prevent injuries. The company is a blue-collar electrical contractor that understands and cares about its team. Projects typically involve working with 2-4 people. Job Type & Location This is a Permanent position based out of Rochester, NY. Pay and Benefits The pay range for this position is $25.00 - $32.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Rochester,NY. Application Deadline This position is anticipated to close on Oct 8, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Your Impact Pearce is seeking Experienced HVAC Technicians to join our team for servicing and repairing commercial HVAC equipment on telecom shelters located on Cell Tower sites. This is a fast-paced and rewarding job that is best suited for individuals who are responsible, self-directed, highly motivated, willing to travel, and looking to learn and grow in the Telecom industry. This is a regional position. Candidates should reside within 60 miles of Kingston, New York area. Core Responsibilities • Maintaining cooling systems – diagnosing, troubleshooting, repairing, or installing and replacing components of entire systems., • Conducting performance checks and regular maintenance on HVAC equipment., • Performing additional maintenance or upgrades to out-of-season HVAC equipment., • Responding to service calls in a timely manner, including emergency call out services., • Timely and accurate completion of daily work reports., • Operate and maintain a motor vehicle safely and legally per the PEARCE Employee Handbook and insurance requirements. Specific duties may vary or evolve over time based on business and client needs. Core Experience • Must be Level 2 or Universal EPA Certified (Required)., • 3+ years of experience with HVAC maintenance (commercial preferred)., • Basic knowledge of electronic, mechanical, and electrical components including refrigeration systems is preferred., • Must be able to communicate effectively both verbally and by email. Physical/Work Environment At Pearce safety is our number one concern. Candidates must be able to comply with OSHAFCC/FAA/EPA Standards. • Candidates should reside within 60 miles of Kingston, New York area., • Must be available for after-hours and weekend call outs on occasion., • Extensive daily travel in an independent work structure., • Occasional overnights required-company pays all travel costs and provides per diem., • Driving to remote work sites as needed., • Be exposed to ambient temperatures while working outdoors., • Lift and move equipment as needed (up to 50 pounds)., • Will be required to pass a Department of Transportation (DOT) physical. Compensation: $62,400–$110,000 per annual salary/DOE At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range $30—$43 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Your Impact Pearce is seeking Entry Level HVAC Technicians to join our team for servicing and repairing commercial HVAC equipment on telecom shelters located on Cell Tower sites. This is a fast-paced and rewarding job that is best suited for individuals who are responsible, self-directed, highly motivated, willing to travel, and looking to learn and grow in the Telecom industry. This is a regional position. Candidates should reside within 60 miles of Kingston, New York area. Core Responsibilities • Maintaining cooling systems – diagnosing, troubleshooting, repairing, or installing and replacing components of entire systems., • Conducting performance checks and regular maintenance on HVAC equipment., • Performing additional maintenance or upgrades to out-of-season HVAC equipment., • Responding to service calls in a timely manner, including emergency call out services., • Timely and accurate completion of daily work reports., • Operate and maintain a motor vehicle safely and legally per the PEARCE Employee Handbook and insurance requirements. Specific duties may vary or evolve over time based on business and client needs. Core Experience • Must be Universal EPA Certified (Required)., • Basic knowledge of electronic, mechanical, and electrical components including refrigeration systems is preferred., • Must be able to communicate effectively both verbally and by email. Physical/Work Environment At Pearce safety is our number one concern. Candidates must be able to comply with OSHAFCC/FAA/EPA Standards. • Candidates should reside within 60 miles of Kingston, New York area., • Must be available for after-hours and weekend call outs on occasion., • Extensive daily travel in an independent work structure., • Occasional overnights required-company pays all travel costs and provides per diem., • Driving to remote work sites as needed., • Be exposed to ambient temperatures while working outdoors., • Lift and move equipment as needed (up to 50 pounds)., • Will be required to pass a Department of Transportation (DOT) physical. Compensation: $49,920 - $56,160 salary/DOE At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range $24—$26 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Job Description HVAC Service Technician Location: Rochester/Geneva, NY Company: T-Mark Plumbing, Heating, Cooling & Electric Looking for Your Next Great HVAC Career? Join a team that values your experience, invests in your growth, and keeps you busy year-round. If you know residential HVAC and enjoy taking care of customers, T-Mark is the place for you. We're looking for an experienced HVAC Service Technician who enjoys troubleshooting, solving problems, and delivering exceptional service to homeowners throughout Western New York. If you're dependable, motivated, and ready to grow with a company that values its people, we'd love to meet you. Pay: $25-32/hr + Incentives What You'll Do • Diagnose, troubleshoot, repair, and maintain residential HVAC systems, • Perform preventative maintenance on heating and cooling equipment, • Service and maintain:, • Furnaces, • Air Conditioners, • Heat Pumps, • Boilers, • Oil Heating Systems, • Ductless Mini-Split Systems, • Rooftop Units (RTUs), • Identify system issues and recommend repair or replacement solutions, • Educate homeowners on equipment performance, maintenance plans, and energy-saving opportunities, • Deliver an outstanding customer experience on every service call, • Complete service documentation accurately, • Communicate professionally with customers, dispatchers, and teammates, • Maintain your company vehicle, tools, and equipment, • Participate in ongoing technical training, • Participate in a rotating weekend on-call scheduleWhat We're Looking ForRequired Qualifications, • Minimum 2 years of residential HVAC service experience, • Strong diagnostic and troubleshooting skills, • Experience servicing furnaces, air conditioners, heat pumps, boilers, oil heating systems, mini-splits, and RTUs, • EPA Certification required, • Valid driver's license with a clean driving record, • Must have your own basic HVAC hand tools, • Excellent customer service and communication skills, • Ability to work independently while contributing to a team environment, • Weekend on-call availability on a rotating schedulePreferred Qualifications, • EPA Universal Certification, • NATE Certification, • Experience using ServiceTitan, • Experience with indoor air quality products and humidification systems, • Experience recommending repairs, accessories, or replacement options to homeownersWhat Makes You Successful, • Strong mechanical aptitude, • Excellent problem-solving skills, • Positive attitude and professional appearance, • Dependable, motivated, and safety-focused, • Pride in quality workmanship, • Ability to build trust and lasting relationships with customers, • Strong time management and organizational skillsWhy You'll Love Working at T-Mark, • Competitive Pay, • Medical, Dental & Vision Insurance, • 401(k) with Company Match, • Paid Time Off, • Paid Holidays, • Company Vehicle, • Company-Provided Uniforms, • Year-Round Work, • Paid Training and Continuing Education, • Career Advancement Opportunities, • Supportive Leadership Team, • A Company That Invests in Your SuccessWhy T-Mark? At T-Mark Plumbing, Heating, Cooling & Electric, we know our technicians are the heart of our business. That's why we provide the training, support, tools, and opportunities you need to build a long-term career. When you join T-Mark, you're joining a team that works hard, has each other's backs, and takes pride in delivering exceptional service every day. Ready to take the next step in your HVAC career? Apply today and become part of the T-Mark team! #HVAC1 We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Clean Harbors in Avon is seeking a Class B Driver (Retail Technician) to provide comprehensive environmental services including collection and disposal of damaged, discarded, or recalled products; recycling of light bulbs, oil, oil filters, engine fluids and other materials; and on-site cleanup activities. Clean Harbors will pay for your CDL B training. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Clean Harbors? • Health and Safety is our #1 priority and we live it 3-6-5!, • Focus on maintaining sustainability and cleaning the Earth, • Recruiting Pay range 26.00- 28.00, • Comprehensive health benefits coverage after 30 days of full-time employment including 401K with Company match, • Own part of the company with our Employee Stock Purchase Plan, • Opportunities for growth and development for all the stages of your career, • Company paid training and tuition reimbursement RESPONSIBILITIES Key Responsibilities: • Ensure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe manner, • Pick up, pack and transport damaged and discarded goods management, and recalled products, • Load, pack and segregate materials and waste products, • Driving a Box Truck, visiting retail customer sites, • Segregating, packing and loading materials and waste products (inventory that is damaged or expired) for safe transportation, • Interacting with customers at each stop, • Prepare DOT shipping documents, • Use of a laptop, printer, handheld, and iPhone to complete tasks, • Conduct projects/jobs according to site specific Federal, State and local regulations and health and safety plans as well as Clean Harbors Environmental Services, Inc., policies and procedures, • Executes Jobs at Clean Harbors customer locations including fortune 500 companies, • Responsible for final preparation and approval of all projects before shipment in accordance with OSHA, EPA, DOT and company policies, • Conducts projects/jobs according to site specific Federal, State, and local regulations and health and safety plans, • Understand customer specific disposal restrictions/special packaging requirements, • Ensures drum count is correct and that drum conditions are shippable in accordance our company’s policies and procedure, • Follow all local, state (provincial) and federal compliance regulations and rules, • Safely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirements, • Safely observe all corporate operating guidelines and procedures, • Observe all company environmental health and safety operating guidelines, • Perform other duties as assigned QUALIFICATIONS Required Qualifications: • Valid Driver’s license required, • Strong customer service skills, • The ability to use a laptop, handheld, printer, and iPhone are required, • By position, eligible to obtain a CDL Class B with hazmat and tanker endorsement within 6 months of hire, company paid, • Perform physical functions per job requirements, • Successfully complete a background check, drug test, and physical, by position, • Per OSHA's Respiratory Protection standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications:, • Previous commercial driving experience, • Previous route experience, • Previous manual labor experience Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact _ or 1-844-922-5547. Clean Harbors is a Military & Veteran friendly company. Please be advised that Artificial Intelligence (AI) tools may be used to support certain stages of the recruitment process but are not used as a replacement for human decision making. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. *CH

Mad City Windows & Baths, a Renuity Company In-Home Sales Representative Average reps can make $200k-$300k/yr with UNCAPPED earnings! Mad City Windows & Baths, a proud company of the Renuity family, where innovation and excellence drive everything we do. As part of a powerful network of seven of the most trusted home renovation companies in America, we are on a mission to revolutionize home improvement—making it faster, easier, and stress-free. We are helping homeowners create spaces they love, without the hassle. With expert teams across 36 states and growing, there’s likely a Renuity home in your neighborhood. We value fresh perspectives and welcome candidates from all backgrounds to bring their unique experiences and ideas to our team. And we’re just getting started! What We Offer Base Salary + Sales Commission + Performance Bonus earning opportunity Average earning potential of $200k-$300k/yr True uncapped earnings – ask our recruiters about high performers! ALL leads are provided to you! 2 - 3 pre-set, pre-qualified appointments a day No cold-calling or lead generation required! W2 employment - comprehensive benefits packages, PTO, 401(k) with match State of the art sales training program Year-end awards ceremony with luxury gifts, company vacations, and more! About the Role In this position, you will: Meet with potential clients in their homes, demonstrating our unique products and outstanding services Provide timely presentations, accurate estimates, and detailed documentation Become a professional expert, fulfilling all steps in providing customer service beyond expectations to generate repeat business Key Qualifications Ability to work evening and Saturday appointments (No Saturday evening appointments) In-Home Sales, Outside Sales, or Business to Consumer Sales experience preferred Ability to meet and exceed goals Must be self-motivated and results oriented Ability to attend one-time training session in Madison, WI #zr About _ At Mad City Windows & Baths, a Renuity company, we’re making home improvement faster, easier, and stress-free. Homeowners across the Midwest have trusted us for top-tier remodeling services, and now, as part of Renuity, we’re combining our local expertise with the strength of a national brand to build the future of home improvement. With a winning mentality, we continue to grow rapidly, offering unparalleled career opportunities—100% of our current marketing leaders started in entry-level roles. As part of our team and the broader Renuity organization, you’ll have the opportunity to make an impact, grow your career, and help people create homes they love. Renuity and its affiliates are committed to equal opportunity. We value and embrace diversity and inclusion of all Team Members. If you have a disability under the Americans with Disabilities Act or similar law, and you need an accommodation during the application process or to perform these job requirements, or if you need a religious accommodation, please contact Humanresources@renuityhome.com. If you have a question regarding your application, please contact TA@renuityhome.com To access Renuity's Privacy Policy, please click here: _

Job Description Job Title: HVAC Service Technician Job Description The HVAC Service Technician installs, maintains, and repairs commercial heating, ventilation, and air conditioning systems in environments such as offices, retail stores, and other business facilities. You will ride along with experienced technicians, assist with repair and maintenance of existing systems, and use basic hand and testing tools to perform entry-level diagnostics while receiving on-the-job training. You will also support installation projects as needed and work from blueprints and schematics to troubleshoot and maintain preexisting HVAC units. Responsibilities • Ride along with experienced technicians to assist with repair and maintenance of commercial HVAC systems., • Use basic hand tools and testing equipment to perform entry-level diagnostics and support on-the-job training., • Support HVAC installation jobs when needed, including assisting with setup, assembly, and system start-up., • Regularly inspect and test HVAC systems to ensure they are functioning properly and safely., • Diagnose and troubleshoot malfunctions in HVAC systems using blueprints, schematics, and testing tools., • Repair or replace faulty parts and components in HVAC systems to restore proper operation., • Perform regular preventative maintenance on HVAC systems to ensure optimal performance and reliability., • Verify that HVAC systems operate efficiently and comply with applicable safety and environmental standards., • Work on commercial and industrial job sites with both new and preexisting HVAC units., • Drive to job sites within approximately 30 miles of the company’s headquarters in the Rochester, NY area., • Participate in an on-call rotation, being available for 24-hour service coverage for one week at a time on a recurring basis. Essential Skills • Hands-on experience with HVAC servicing, including inspection, maintenance, and repair., • Ability to perform troubleshooting on HVAC systems using basic diagnostic tools., • Experience performing preventative maintenance on HVAC equipment., • Understanding of electrical concepts related to HVAC systems and components., • Familiarity with boilers and related mechanical systems., • Knowledge of OSHA safety practices; OSHA 10 certification preferred., • EPA-related knowledge or exposure to environmental and safety standards for HVAC work., • Valid driver’s license and reliable transportation to drive to job sites., • Ability to read and interpret blueprints and schematics for HVAC systems., • Strong service mindset with the ability to work independently in the field., • Willingness to participate in an on-call rotation for after-hours service. Additional Skills & Qualifications • OSHA 10 certification (preferred)., • EPA-related training or certification (preferred)., • Prior experience working on commercial or industrial HVAC systems., • Experience with electrical troubleshooting in HVAC applications., • Familiarity with boilers and preventive maintenance programs., • Interest in ongoing training and schooling related to HVAC, supported by tuition or training reimbursement., • Strong communication skills to interact with customers and team members on job sites., • High level of personal responsibility and accountability in a field-based role. Why Work Here? You join a growing, close-knit team that values attitude and potential, offering significant freedom paired with trust and responsibility. The company provides a car allowance, company uniforms, and all required PPE (except work boots), along with power tools so you can focus on your work rather than your gear. You benefit from comprehensive medical, vision, and dental coverage, plus a 401(k) with a 3% match to support your long-term financial wellbeing. There are clear opportunities for professional growth, including reimbursement for training and schooling and the potential to earn a company vehicle once you move into a direct role. The culture emphasizes development, autonomy, and support, making it a strong environment for building a long-term HVAC career. Work Environment The company operates with the motto "hire for attitude, train for skill," fostering a culture that emphasizes learning, responsibility, and professional growth. The team currently consists of around two dozen employees and is continuing to expand. Technicians drive themselves to job sites and typically work within approximately 30 miles of the headquarters in the Rochester, NY area, with all jobs local and no out-of-town travel required. You will work on commercial and industrial job sites with both new and preexisting HVAC units, using power tools and PPE provided by the company (work boots supplied by the employee). Standard hours are first shift, Monday through Friday, from 7:00 a.m. to 3:30 p.m. with a 30-minute lunch break. Service technicians participate in an on-call rotation, being on call for 24 hours a day for one week (Monday through Sunday) approximately every 5 to 6 weeks, with a bonus provided for each on-call week. The environment offers significant autonomy in the field, balanced by clear expectations and support from a small, collaborative team. Job Type & Location This is a Permanent position based out of Rochester, NY. Pay and Benefits The pay range for this position is $24.00 - $32.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Rochester,NY. Application Deadline This position is anticipated to close on Oct 8, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Title: IT Service Desk Technician \n Department: Information Technology \n Location: Rochester, NY \n Classification: Nonexempt \n Reports To: Director of Information Technology \n \n About the Firm: \n It is an exciting time to be at Woods Oviatt Gilman. As the firm grows, we work hard to maintain a workplace that is enjoyable day to day and one you can be proud of in the community. We recognize the importance of work/life balance and offer a range of programs that support it. \n \n Position Summary: \n The IT Service Desk Technician is the first point of contact for firm personnel seeking technical support. Working in a fast-paced professional services environment, the Technician supports a cloud-based Microsoft 365 workplace, a mobile laptop fleet, and the firm's legal applications, for users both in the office and working remotely. Success in this role calls for quick response, clear communication, and methodical troubleshooting. The position offers a defined path for growth for the right candidate. \n \n Duties and Responsibilities: \n\n • Serve as the first point of contact for internal users requesting technical assistance, by phone, email, ticket, and in person\n, • Log, categorize, prioritize, and track requests in Jira, the firm's IT Service Desk ticketing system\n, • Diagnose and resolve hardware, software, application, and network connectivity issues, escalating to senior IT staff when appropriate\n, • Support Microsoft 365 and the firm's cloud applications, including Outlook and Exchange Online, Teams, SharePoint, and OneDrive\n, • Administer day-to-day identity and access tasks, including account setup, password resets, group and license assignment, and multifactor authentication enrollment and troubleshooting\n, • Support the firm's laptop fleet through Microsoft Intune, including device enrollment, configuration, application deployment, and encryption and recovery key handling\n, • Support NetDocuments, DocuSign, Kofax, and other firm applications, and assist users with document workflows\n, • Provide remote support to attorneys and staff working off-site, including VPN, remote access, and connectivity troubleshooting\n, • Complete onboarding and offboarding tasks, including equipment provisioning, account and access changes, and asset tracking\n, • Recognize and promptly escalate phishing reports and suspected security incidents in accordance with firm procedures\n, • Own tickets through to resolution, providing status updates to users and following up after a fix to confirm the issue is closed\n, • Document solutions and workarounds, and contribute to the firm's internal knowledge base and support best practices\n, • Support the firm's managed print environment, including first-level troubleshooting and coordination with the managed print services vendor\n, • Share recurring issues, user feedback, and process improvement suggestions with the IT team and management\n, • Build and maintain working knowledge of new technologies adopted by the firm\n\n \n Technical Skills: \n Required \n\n • Microsoft 365 and cloud collaboration: Word, Excel, Outlook, PowerPoint, and Teams, including support for Exchange Online, SharePoint, and OneDrive\n, • Identity and access: Microsoft Entra ID or Active Directory account administration, and multifactor authentication support\n, • Endpoint management: Windows 11 in a managed environment, Microsoft Intune or comparable MDM, and device encryption and recovery\n, • Service desk tooling: hands-on experience with Jira, including ticket creation, queue management, and workflow\n, • Remote support: VPN clients, remote access and remote-control tools, and Wi-Fi and home network troubleshooting\n, • Networking fundamentals: working understanding of TCP/IP, DNS, and DHCP sufficient to isolate connectivity issues\n, • Hardware and peripherals: laptop support, mobile device support, docking stations, printers, and multifunction devices\n, • Applications: Kofax Power PDF, and Microsoft Edge as the firm's standard browser\n\n Preferred \n\n • Experience supporting a document management system, ideally NetDocuments\n, • Experience with DocuSign or another e-signature platform\n, • Familiarity with Confluence or another knowledge base platform\n, • Basic PowerShell for routine administrative tasks\n, • Prior experience in a law firm or other professional services environment\n, • Relevant certifications such as CompTIA A+, ITIL Foundation, or a Microsoft 365 endpoint administrator credential\n\n \n Qualifications and Competencies: \n\n • Strong verbal and written communication skills, with the ability to explain technical concepts to non-technical users\n, • Demonstrated troubleshooting and problem-solving ability, including the judgment to know when to escalate\n, • Proven ability to work collaboratively as part of a team\n, • Consistent accuracy and attention to detail in both technical work and documentation\n, • Ability to organize, prioritize, and manage competing requests in a high-volume environment\n, • A respectful, friendly, and service-oriented approach to colleagues at every level of the firm\n, • Ability to influence outcomes and improve processes constructively and without confrontation\n, • Analytical, curious, and process-oriented, with an interest in continued technical development\n, • Discretion and sound judgment in handling confidential and privileged information\n\n \n Education and Experience: \n\n • Bachelor of Science in Information Technology, Computer Science, or a related field, or equivalent practical experience\n, • Two or more years of experience in an IT service desk or help desk support role\n\n \n Physical Requirements: \n The following are representative of the physical demands of this position. Reasonable accommodations may be made for qualified individuals with disabilities. \n\n • Ability to transport and position computer equipment, printers, and related hardware\n, • Ability to bend, reach, and remain standing for extended periods\n, • Ability to lift and move items weighing up to 50 pounds\n\n \n Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. This is a snapshot of the core functions and responsibilities. All inquiries will be handled with the utmost confidentiality. The compensation range for this position is $55,000- $65,000 annually, representing our good faith and reasonable estimate of the potential compensation at the time of posting. Actual compensation will be determined based on various factors, including the candidate’s qualifications, experience, skill set, and office location. \n Woods Oviatt Gilman LLP is an Equal Opportunity Employer. We value an open mind, dedication to work, and a collaborative spirit. We hire based on these qualities, a job’s requirements, our business needs, and an applicant’s qualifications. We do not tolerate discrimination or harassment of any kind—in the hiring process or in the workplace. We comply with the ADA and consider reasonable accommodation measures that may be necessary for eligible applicants/employees to perform essential functions. We participate in E-Verify. We will provide the federal government with employees’ Form I-9 information to confirm authorization to work in the U.S. We will only use E-Verify once an employee has accepted a job offer and completed Form I-9. \n

Job Description???? NOW HIRING: Production Associates ???????? $18.00/Hour | ???? 1st Shift | ???? Monday-Friday | Apply Now!! Looking for a stable full-time job with benefits, weekends off, and opportunities to grow? We're hiring Production Associates to join a team that values hard work, reliability, and a positive attitude. ✨ No manufacturing experience? No problem! We provide paid, on-the-job training. ???? What You'll Do ✅ Mix and prepare production materials ✅ Operate manufacturing equipment safely ✅ Load/unload molds, presses, and kilns ✅ Inspect products for quality ✅ Package finished products for shipment ✅ Keep your work area clean and safe ???? What We're Looking For ✔ Reliable and dependable attendance ✔ Willingness to learn and work as part of a team ✔ Comfortable in a fast-paced environment ✔ Attention to detail and quality ✔ Ability to lift up to 50 lbs and stay active throughout the shift ???? Experience in manufacturing, warehouse, construction, landscaping, assembly, packaging, or general labor is helpful, but not required. ???? Why You'll Love It Here ✅ Starting pay of $18.00/hr ✅ Medical, Dental & Vision Benefits Eligible ✅ Monday-Friday schedule ✅ Afternoons, evenings & weekends off ✅ Family-oriented, team-focused culture ✅ Opportunities for advancement and skill development ✅ Safety-first workplace with PPE provided ✅ Long-term opportunity with room to grow ✅ Summer refreshments and employee amenities ???? Schedule ???? Monday-Friday ⏰ 6:00 AM - 2:00 PM ???? Location East Rochester, NY (Onsite) ⚠️ Requirements ???? Steel-toe boots required ???? Able to perform physical work, including lifting, standing, walking, and bending throughout the shift ???? Ready to Start a New Career?If you're dependable, motivated, and looking for a company that will invest in your future, apply today! We're hiring immediately and willing to train the right people. ????Job Type & Location This is a Contract position based out of East Rochester, NY. Pay and Benefits The pay range for this position is $18.00 - $18.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in East Rochester,NY. Application Deadline This position is anticipated to close on Sep 30, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Title Assembler Department Assembly Reports to Assembly Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Position Overview The Optical Assembler plays a critical role in the production of high-performance optical components and assemblies used in military systems, advanced imaging and sensing equipment. Many of the products built in this role support mission-critical equipment – including ruggedized optics, low-light imaging devices, and components integrated into defense, surveillance and field-deployed platforms. This position requires exceptional attention to detail, steady hands, and a disciplined approach to following technical work instructions. You will assemble, align, inspect and verify optical components that must perform reliably in demanding environments, from extreme temperatures to high-vibration field conditions. This role is ideal for someone who takes pride in craftsmanship, thrives in a clean, controlled manufacturing environment, and understands the responsibility of building components that professionals depend on in real-world operations. Key Responsibilities: • Assemble precision optical components and mechanical subassemblies using specialized tools and fixtures to meet daily production targets., • Performa fine alignment of optical elements using microscopes, interferometers and laser alignment systems., • Apply adhesives, epoxies and bonding agents with controlled volume and placement, following cure schedules and handling requirements., • Install mechanical fasteners to exact specifications to maintain optical alignment and structural integrity., • Inspect incoming and in-process optical components for defects such as scratches, digs, chips, coating issues and contamination., • Verify optical performance using test equipment such as interferometers, MTF benches, spectrophotometers and optical comparators., • Document inspection results and maintain traceability through travelers, routers, or ERP system., • Identify nonconformance's and collaborate with quality and manufacturing engineering to resolve issues., • Follow detailed work instructions, assembly drawings, and standard operating procedures (SOPs) with zero deviation., • Maintain cleanroom environment standards., • Record production data accurately, including lot numbers, serial numbers, material usage and process steps., • Support continuous improvement initiatives by providing feedback on tooling, processes, and documentation. Required Skills & Qualifications: • High School Diploma/GED Required., • 1–3 years of experience in a manufacturing environment, including hands-on assembly, micro-assembly, or similar precision work. Candidates with other precision, hands-on experience demonstrating strong attention to detail and manual dexterity will also be considered., • Strong manual dexterity and ability to work with small, delicate components under magnification., • Strong attention to detail, consistency, and process discipline., • Ability to read and interpret technical drawings, schematics, and work instructions, • Experience in optical assembly or working with precision optical components a plus., • Familiarity with optical handling, cleaning, and contamination-controlled practices., • Comfortable working in a cleanroom or controlled environment., • Experience with ISO 9001 quality systems a plus., • Familiarity with computers and ERP systems for recording production data. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match & tuition reimbursement opportunities., • Health, dental, vision & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Work Environment & Physical Demands • Work is performed in a cleanroom and manufacturing environment with exposure to moving equipment, moderate to loud noise, and materials such as oils, solvents, and cleaning agents, • Requires use of appropriate personal protective equipment, including safety glasses and cleanroom garments, • Position involves a combination of standing, walking, and sitting for extended periods, along with occasional stooping, kneeling, and reaching, • Frequent use of hands for handling and assembling small components requiring fine motor coordination and dexterity, • Sustained visual focus is required, including close-up and magnified work, with the ability to identify fine detail and adjust focus as needed, • Regular use of computers and standard assembly or inspection tools, • Ability to lift up to 50 lbs. as needed, • Work may shift between stations and may require schedule flexibility, including overtime or weekend work based on production needs Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. A Shift Schedule: Monday - Friday, 6am - 2:30pm B Shift: Mon - Fri 2pm - 10:30pm Training to be conducted on A shift for 2 - 4 weeks before transitioning to B shift schedule

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: An Extrusion Utility Operator is responsible for safely and effectively contributing to team a of 4-5 individuals supporting the operation of extrusion lamination manufacturing equipment. Maintaining a strong work ethic while demonstrating good communication skills are important to exceeding customer expectations, productivity standards, and personal career growth. Extrusion Utility Operators are expected to be able to independently prioritize their time and duties to contribute to the team running efficiently. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Performs duties in a manner that adheres to safety policies and procedures., • Participate in the training curriculum, learning new aspects of extrusion line operations while completing assigned duties required for operation., • Maintain quality standards by reviewing product specifications and ensuring thorough completion of assigned production paperwork., • Operate as a member of a larger team responsible for aspect of overall process. Team members will rely on attention to detail and proper communication to ensure entirety of process is safe and efficient., • Exercise cautious approach to heavy equipment including use over overhead hoists., • Completes tasks to ensure area around the machine is clean to GMP & Food Safety standards, • Visual acuity for identifying minor imperfections and material defects., • Basic understanding of general tool usage including tape measurers, utility knives and screw drivers., • Good communication skills, both verbal and written with working knowledge of Microsoft Office.Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); and one to three years related manufacturing experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and comprehend simple instructions and short correspondences. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to peers and supervisors within the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. MATHEMATICAL SKILLS Ability to read/use a tape measurer and apply concepts of basic algebra. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to reach out for assistance and communicate if instructions or assignments are not clear. Ability to retain information and apply to future situations of similar manner. PHYSICAL DEMANDS The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: talentacquisition@americanpackaging.com.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SCHEDULE: 12 hour rotating shifts on a 2-2-3 schedule SUMMARY: Extrusion Operator 3 is responsible for safely and effectively contributing to teams of 4-5 individuals supporting the operation of extrusion lamination manufacturing equipment. Maintaining a strong work ethic while demonstrating good communication skills are important to exceeding customer expectations, productivity standards, and personal career growth. An Extrusion Operator 3 is expected to be able to independently prioritize their time and duties to contribute to the team running efficiently. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Performs duties in a manner that adheres to safety policies and procedures., • Participate in the training curriculum, learning new aspects of extrusion line operations while completing assigned duties required for operation., • Maintain quality standards by reviewing product specifications and ensuring thorough completion of assigned production paperwork., • Operate as a member of a larger team responsible for aspect of overall process. Team members will rely on attention to detail and proper communication to ensure entirety of process is safe and efficient., • Exercise cautious approach to heavy equipment including use over overhead hoists., • Completes tasks to ensure area around the machine is clean to GMP & Food Safety standards, • Visual acuity for identifying minor imperfections and material defects., • Basic understanding of general tool usage including tape measurers, utility knives and screw drivers., • Good communication skills, both verbal and written with working knowledge of Microsoft Office.Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); and one to three years related manufacturing experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and comprehend simple instructions and short correspondences. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to peers and supervisors within the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. MATHEMATICAL SKILLS Ability to read/use a tape measurer and apply concepts of basic algebra. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to reach out for assistance and communicate if instructions or assignments are not clear. Ability to retain information and apply to future situations of similar manner. PHYSICAL DEMANDS The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: talentacquisition@americanpackaging.com.

The Controller is responsible for overseeing accounting operations, financial reporting, and compliance while providing financial insight to support business decision-making. This role is well-suited for a hands-on accounting professional who thrives in a small manufacturing environment and enjoys improving processes, building structure, and partnering with leadership. \n \n Key Responsibilities \n\n • Manage day-to-day accounting functions, including accounts payable, accounts receivable, bank reconciliations, and general ledger activities.\n, • Prepare monthly financial statements and supporting schedules.\n, • Maintain cost accounting processes, inventory valuation, and job costing.\n, • Oversee payroll and ensure compliance with applicable regulations.\n, • Manage sales tax, property tax, and other required filings.\n, • Support budgeting, forecasting, variance analysis, and KPI reporting.\n, • Coordinate year-end activities with external auditors and tax advisors.\n, • Strengthen internal controls, accounting policies, and financial processes.\n, • Provide financial analysis and decision support to leadership.\n, • Maintain the integrity of ERP and accounting system data.\n\n \n Qualifications \n\n • Bachelor's degree in Accounting, Finance, or related field.\n, • 5+ years of progressive accounting experience, preferably in manufacturing.\n, • Strong knowledge of GAAP, cost accounting, and financial reporting.\n, • Experience with ERP/accounting systems and advanced Excel skills.\n, • Strong analytical, organizational, and problem-solving abilities.\n, • Ability to work independently and collaborate effectively across departments.\n\n \n Preferred Experience \n\n • Small to mid-sized manufacturing environment.\n, • Inventory management, BOMs, and production costing.\n, • Accounting system implementations and process improvement initiatives.\n\n \n Compensation & Benefits \n\n • Competitive compensation based on experience.\n, • Medical, dental, and vision benefits.\n, • Paid time off and holidays.\n, • 401(k) retirement plan.\n, • Flexible full-time or part-time schedule options.\n, • Professional growth and advancement opportunities.\n\n \n \n

\n we are seeking an Applications Engineer to develop concepts, pricing, and proposals for automated equipment, tooling, fixtures, and inspection systems. \n This position is ideal for an experienced Toolmaker, Machine Builder, CNC Programmer, Manufacturing Technician, Mechanical Designer, or Automation Professional looking to leverage their hands-on manufacturing knowledge in a more technical, customer-focused role. You'll work closely with engineering, sales, and project teams to develop practical solutions, estimate project costs, and support customer proposals. \n Key Responsibilities \n\n • Review customer specifications, statements of work, drawings, and other technical documentation to develop project concepts and quotations.\n, • Prepare proposals, estimates, bills of materials (BOMs), and pricing packages for custom automation equipment, tooling, fixtures, and gauges.\n, • Work closely with mechanical and controls engineering teams to develop accurate concepts and project scopes.\n, • Support sales and business development efforts by providing technical input during the quotation process.\n, • Participate in quote review meetings and customer discussions as needed.\n, • Assist with equipment and tooling concepts, layouts, and design recommendations.\n, • Coordinate with manufacturing, engineering, and external suppliers to gather technical and cost information.\n, • Assemble complete project handoff packages for engineering and production teams.\n, • Identify opportunities to improve estimating processes, project costing, and proposal development procedures.\n, • Support project schedules and customer deadlines as required.\n\n Qualifications \n\n • Technical degree, apprenticeship, military technical training, or equivalent hands-on manufacturing experience.\n, • Experience in tooling, machining, machine building, automation, manufacturing engineering, estimating, or custom equipment design.\n, • Ability to read and interpret mechanical drawings, blueprints, customer specifications, and statements of work.\n, • Experience creating or working with bills of materials (BOMs), material costing, and project estimates.\n, • Strong understanding of manufacturing processes, tooling, fixtures, automation systems, or custom machinery.\n, • Excellent communication and organizational skills.\n, • Proficiency with Microsoft Office and familiarity with CAD software is beneficial.\n, • Ability to manage multiple projects and priorities simultaneously.\n\n Preferred Backgrounds \n We encourage applications from candidates with experience as: \n\n • Toolmaker\n, • Senior Machinist\n, • CNC Programmer\n, • Manufacturing Engineer\n, • Machine Builder\n, • Mechanical Designer\n, • Tooling Engineer\n, • Industrial Maintenance Technician\n, • Automation Technician\n, • Process Engineer\n\n What We're Looking For \n The ideal candidate understands how things are built and manufactured and can translate customer requirements into practical solutions and realistic project costs. We value hands-on experience just as much as formal education and are looking for someone who can bring real-world manufacturing knowledge to the quoting and applications process.

Job Summary\n \n \nThe Quality Manager is responsible for leading a team to develop, implement, and improve quality control processes in alignment with ISO9001:2015. This role involves managing the post-shipment support process and leading a team to identify, recommend, and implement solutions to continually enhance quality performance, focusing on reducing the cost of poor quality and improving customer experience.\n \n Principal Duties and Responsibilities\n \n\n • Lead organizational ISO9001:2015 compliance and maintain the Quality System by developing, implementing, and improving standard processes.\n, • Oversee and meticulously document quality control processes and procedures.\n, • Define the quality direction for both business and manufacturing processes and implement comprehensive strategies to achieve organizational quality objectives.\n, • Identify opportunities to develop new processes and capabilities to reduce costs associated with warranty, scrap, and rework.\n, • Develop and implement standards for business processes to ensure product conformance and reduce non-conformance.\n, • Develop and implement Quality Control Plans across the multidisciplinary aspect of our manufacturing processes.\n, • Lead a team to develop, maintain, and improve quality processes that optimize safety, quality, delivery, and cost.\n, • Champion continuous improvement and develop the team to support root cause analysis and problem-solving based on data analysis and statistics.\n, • Collaborate with project management, sales, and design engineering departments to define inspection and test plans to meet committed specifications.\n, • Prepare product and process reports by collecting, analyzing, and summarizing information and trends to influence and set business strategy.\n, • Establish and lead processes to identify and rectify non-conformance of products or processes, allocating resources accordingly to achieve business objectives.\n, • Provide infrastructure and processes to support and address customer complaints, implementing corrective actions to prevent recurrence.\n, • Contribute to vendor component qualification and corrective actions to ensure purchased parts, in-process samples, and finished products meet established testing and inspection standards.\n, • Manage business change control processes to structure, monitor, and verify proper implementation.\n, • Ensure compliance with established industry safety, design standards, and guidelines.\n, • Perform quality activities in compliance with company and manufacturing standards, engineering principles, customer requirements, and related specifications.\n, • Perform other duties as assigned.\n\n Knowledge, Skills, and Abilities\n \n\n • Data analysis, statistical control and processes creation/development.\n, • Ability to read, interpret, and understand technical engineering drawings and symbols (e.g., blueprints and GD&T).\n, • Monitoring and assessing performance to make improvements or take corrective action.\n, • Strong judgment and decision-making skills, considering the relative costs and benefits of potential actions.\n, • Project management skills and experience with tools.\n, • Experience with manufacturing processes such as welding, milling, turning, and machine assembly.\n, • Proficiency in Microsoft Office Suite and ERP programs (e.g., Microsoft Word, Excel, Outlook, SharePoint, SAP).\n, • Strong root cause analysis and problem-solving skills.\n, • Must have strong interpersonal communications skills\n\n \n EDUCATION AND EXPERIENCE\n \n\n • Bachelor's degree in an Engineering discipline and minimum 5+ years' Quality Management experience in a ISO9001:2015 compliant manufacturing environment.\n, • Six Sigma Certified as a plus\n\n \n PHYSICAL DEMANDS\n \n \nThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.\n \n \nThis role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. While performing the duties of this job, the employee is regularly required to sit and use hands, fingers, handle or feel, talk, see, and hear. The employee is occasionally required to stand, walk, and reach with hands and arms. The employee must occasionally lift and/or move occasionally lift office products and supplies, up to twenty-five pounds. Use of the appropriate PPE is required. \n \n WORKING CONDITIONS\n \n \nThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.\n \n \nThis job operates in a manufacturing professional office environment. The employee can be exposed to fumes or airborne particles, moving mechanical parts, vibration, and loud noise level while on the production floor.\n \n \nThe noise level in the office work environment is usually moderate.\n \n DISCLAIMER\n \n \nThe above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.\n \n \nAnticipated salary range for this position: $97,000/yr. to $134,860/yr. The anticipated salary range is what we believe to be the likely base salary range for this position at the time of posting. Actual salary for this position will depend on relevant qualifications, skills, and experience.\n \n SPX FLOW VALUES\n \n \nSPX Flow employees are expected to behave in accordance with our company values as outlined below.\n \n QUALITY\n \n \nQuality encompasses all aspects of SPX's business, and every employee shares the responsibility to prevent the occurrence of any nonconformity relating to product, process and the quality system. All employees have an obligation to identify and record any such nonconformity, and through designed channels, initiate and recommend solutions.

The Opportunity: \n MMB+CO is seeking a Firmwide Resource Manager to join our Fairport office. \n \n This role serves as the Firm's primary resource planning and capacity management professional, responsible for providing firmwide workforce deployment analysis, resource forecasting, scheduling strategy, and operational decision support across Tax and Assurance service lines. The role develops and maintains a comprehensive view of firm capacity, utilization, workload demands, and staffing needs, enabling leadership to make informed decisions regarding resource allocation, hiring, workforce planning, and practice operations \n \n Direct reports: None \n \n This individual works closely with Tax and Assurance Department leadership, partners, managers, and other designated operational personnel across all Firm offices. \n \n A Closer Look At The Role: \n\n • Serve as the firm's primary resource planning professional, overseeing workforce deployment, capacity management, and scheduling strategy across Tax and Assurance service lines and all office locations.\n, • Analyze staffing demands, engagement requirements, utilization trends, and capacity constraints to develop resource allocation strategies and recommendations for firm leadership.\n, • Lead firmwide resource planning efforts by balancing workloads, optimizing utilization, and recommending staffing solutions that support business objectives, client commitments, and employee development.\n, • Evaluate competing staffing priorities, resource requests, and scheduling conflicts, exercising independent judgment and escalating matters requiring leadership decisions.\n, • Monitor project schedules, workload demands, staffing commitments, and workforce capacity, proactively identifying risks, constraints, and opportunities for improved resource deployment.\n, • Partner with Tax and Assurance leadership to assess workforce needs and provide recommendations regarding staffing requirements, utilization improvements, cross-training opportunities, hiring needs, and resource deployment strategies.\n, • Review and approve paid time off requests in consideration of business needs, staffing availability, project commitments, and departmental coverage requirements.\n, • Analyze personnel capabilities, availability, experience, and development objectives to recommend staffing assignments and resource reallocations as business priorities evolve.\n, • Maintain a comprehensive view of firmwide capacity, workload forecasts, utilization trends, project deadlines, and anticipated staffing needs, providing timely insights and recommendations to leadership.\n, • Evaluate workforce trends, utilization data, and staffing challenges to support workforce planning, retention, recruiting, succession planning, and cross-training initiatives.\n, • Serve as the firm's resource planning systems lead, ensuring the integrity of scheduling, capacity, and staffing data while supporting informed resource allocation and workforce planning decisions.\n, • Develop and maintain reports, dashboards, and analytics related to capacity, utilization, workload distribution, staffing needs, and other key workforce planning metrics.\n, • Establish and maintain resource planning standards, scheduling methodologies, governance practices, and operational procedures that promote consistency, visibility, and effective decision-making across the firm.\n, • Evaluate and improve resource management processes, workflows, technologies, and reporting capabilities to enhance operational efficiency and workforce effectiveness.\n, • Participate in cross-functional initiatives involving Tax, Assurance, Human Resources, Technology, Learning & Development, and Firm Leadership to support strategic operational objectives and continuous improvement.\n\n \n Required Qualifications \n\n • Associate degree or an equivalent combination of education and relevant professional experience.\n, • A minimum of five years of progressively responsible experience in resource management, workforce planning, project scheduling, practice operations, professional services operations, capacity planning, or a related field.\n, • Demonstrated experience analyzing workload, capacity, utilization, and staffing data to support operational decision-making.\n, • Experience working with scheduling, workflow, practice-management, project-management, resource-management, or comparable business systems.\n, • Demonstrated ability to analyze workload, capacity, and scheduling information and identify potential issues or conflicts.\n, • Strong analytical, organizational, and problem-solving skills with the ability to identify trends, risks, and resource constraints.\n, • Strong proficiency with Microsoft 365 applications, particularly Excel.\n, • Strong written and verbal communication skills.\n, • Ability to work effectively with personnel at all levels of an organization, including partners and senior leadership.\n, • Demonstrated ability to exercise sound judgment, maintain confidentiality, and manage sensitive personnel and capacity information appropriately.\n\n \n Preferred Qualifications \n\n • Bachelor's degree (B.S. or B.A.) in Business Administration, Operations Management, Human Resources, Accounting, Finance, Information Systems, Data Analytics, or a related field.\n, • Experience in a CPA firm, public accounting firm, professional services organization, consulting firm, law firm, or another deadline-driven professional services environment.\n, • Experience supporting resource management or scheduling across multiple offices or geographic locations.\n, • Experience managing resources across multiple business units, departments, or service lines.\n, • Experience with professional-services workflow, practice-management, or resource-management software.\n, • Experience using data analysis, reporting, dashboards, Power Query, Power BI, or comparable reporting tools.\n, • Experience participating in a software implementation, workflow conversion, or business-process improvement initiative.\n, • Experience with workforce planning, utilization analysis, capacity planning, or professional staffing.\n, • Project management, business analysis, Lean Six Sigma, or related training or certification.\n\n \n Get To Know Us: \n At MMB+CO, our focus is on the here and now. It is this forward-thinking, client centered approach that has guided the Firm since inception. Under the leadership of our Managing Partner Mark Kovaleski, MMB+CO has over 200 employees with locations in Canandaigua, Elmira, Latham, Rochester, and Queensbury. Our deep-rooted culture is comprised of dedicated and hard-working professionals who want to make a difference in the communities we serve. MMB+CO is one of the most respected and successful accounting firms in the region and is proud of our commitment to our clients and our people.

Butler/Till is a results-driven marketing agency offering deeply collaborative client experiences, proprietary technology, and world-class partnerships. At Butler/Till, we take immense pride in our independent, women-owned and led status, our unwavering commitment to a purpose-driven approach, and our unique structure as a 100% employee-owned company (ESOP). \n \n SUMMARY \n The Field Team Lead is a strategic, results-driven leader who excels at developing high-performing teams while championing exceptional customer experiences and driving account growth. This role is responsible for managing and mentoring a team of Field Account Managers, equipping them with the tools, training, and support necessary to succeed in both client service and sales. The Field Team Lead is responsible for leading the team with a focus on excellence, fostering strong client relationships, identifying growth opportunities, and ensuring a smooth and efficient experience with our marketing solutions. \n \n As a manager of people, the Field Team Lead is a confident, dynamic leader dedicated to the success of both the team and our client. They inspire their team to deliver exceptional service as trusted advisors, using their marketing expertise and consultative sales skills to understand client needs and effectively present BT’s comprehensive marketing campaigns, including branding, content creation, and paid search. By leveraging industry knowledge, customer insights, and collaborative strategies, the Field Team Lead drives the team to meet ambitious sales goals while ensuring long-term client satisfaction and growth. \n \n KEY OUTCOMES & RESPONSIBILITIES \n Key Outcome: Drive team excellence and foster strong client relationships \n Key Responsibilities: \n\n • Team Leader and Mentor: Supervise and mentor a team of Field Account Managers, fostering a collaborative and high-performance culture that aligns with company goals; provide coaching, feedback, and development opportunities to ensure individual and team success\n, • Relationship Builder: Empower the team to create successful long-term client relationships by understanding client needs, proactively addressing concerns, and ensuring regular, meaningful communication that enhances trust and loyalty\n, • Account Health Champion: Guide the team in overseeing the overall health of assigned accounts, ensuring successful contract renewals, setting, and managing client expectations\n, • Client Experience Advocate: Model and instill a client-centric mindset, ensuring the team delivers exceptional support, promptly resolves issues, and consistently creates positive client experience\n, • Strategic Cross-Seller: Equip and support the team to proactively identify and pursue cross-sell opportunities with customers already engaged in Butler/Till programs, driving incremental revenue growth\n, • Engagement Driver: Lead efforts to maintain high engagement rates with clients by encouraging active, value-added outreach to promote retention and generate new business opportunities\n\n \n Key Outcome: Grow existing accounts by expanding product adoption and deepening client engagement \n Key Responsibilities: \n\n • Manage Sales Pipeline Development: Lead the identification and nurturing of a strong pipeline for upsell and new business opportunities, ensuring the team consistently prioritizes high-value prospects\n, • Lead Sales Strategy Implementation: Offer guidance and oversight to the team in driving enrollments for all Butler/Till program offerings using a solution-oriented sales approach\n, • Drive the Consultative Sales Process: Support and guide the team in implementing consultative sales strategies, ensuring consistent and effective performance\n, • Set and Monitor Sales Targets: Define measurable sales targets for each team member and regularly review progress, including metrics such as call activity, appointments, presentations, and new enrollments\n, • Evaluate and Report on Performance: Lead the strategic oversight of team outreach efforts, insights, recommendations, forecasts, and outcomes, ensuring alignment with organizational goals and providing actionable visibility into performance\n, • Strategically Guide Team to Achieve Revenue Goals: Lead efforts to exceed revenue targets through targeted upselling and cross-selling within existing client accounts\n\n \n Key Outcome: Drive program retention through strategic engagement \n Key Responsibilities: \n\n • Foster Account Health: Monitor and analyze account performance metrics, proactively addressing issues to ensure customer satisfaction and long-term retention\n, • Cultivate Strategic Customer Loyalty: Build deep, trusted partnerships with clients by delivering ongoing value through personalized engagement and proactive support\n, • Optimize Client Engagement: Implement high-touch outreach strategies to ensure customers remain actively engaged with Butler/Till programs, continuously reinforcing the value of our offerings\n, • Leverage Customer Insights: Regularly collect and analyze client feedback, usage data, and engagement trends to inform strategies that strengthen retention efforts\n, • Execute Renewal Strategies: Secure contract renewals by proactively identifying customer needs, creating strategic account plans, and ensuring smooth negotiation processes\n, • Continuously Analyze Metrics: Regularly track and maintain detailed data on retention-focused activities, including client interactions, renewal rates, engagement scores, and outcomes\n\n \n Other Responsibilities: \n\n • Own and execute annual and monthly enrollment activities ensuring an exceptional client experience\n, • Other responsibilities may be required due to business needs and scope of work\n, • Some travel to marketing events hosted by BT or clients is required\n\n \n QUALIFICATIONS \n Required \n\n • 7+ years of experience in Sales Management\n, • 4+ years of experience in end-to-end sales solutions\n, • Solution-focused sales experience with a strong understanding of consultative selling and sales strategies\n, • Proven track record in account management with cross-selling expertise\n, • Excellent communication and presentation skills\n, • Exceptional negotiation and closing skills\n, • Self-motivated, results-oriented, and able to thrive in a fast-paced environment\n\n Preferred \n\n • Bachelor’s degree in Sales, Marketing, or Communication – a combination of education and experience will be considered\n, • 2+ years’ experience with CRM software\n, • Experience marketing at larger scale events such as trade shows exhibiting\n, • Outside sales experience\n, • Experience with marketing products; branding and digital marketing\n\n \n CORE COMPETENCIES \n\n • CUSTOMER FOCUS/CLIENT INTIMACY: Seeking to understand client business challenges/needs and delivering continuous value to our clients\n, • COLLABORATIVE: Working with teams and across the organization with ease\n, • OWNER AGILITY: Able to continuously learn and quickly adapt to changing circumstances\n, • RESULTS DRIVEN: Accepts accountability to deliver business outcomes, even under changing circumstances. Delivers on commitments\n, • DISCIPLINED: Thinks, plans, and prioritizes work on an ongoing basis, plans and aligns with key team members before acting\n\n \n WORK ENVIORNMENT & PHYSICAL DEMANDS \n The work environment and physical demands characteristics described here are representative of those an employee encounters while performing the essential functions of this job, typically in an office setting or in a home office. An employee in this role may be in a stationary position, often standing or sitting for prolonged periods and using office equipment and computers. The noise level in the office environment is usually moderate (i.e., business office with computers and printers, light foot traffic, etc.). Reasonable accommodation may be requested to enable individuals to perform the essential functions. \n \n COMMITMENT TO DIVERSITY, EQUITY, INCLUSION AND BELONGING \n Our dedication to Diversity, Equity, Inclusion, and Belonging (DEIB) is a cornerstone of our culture. We believe that the diversity and inclusivity of our workforce are sources of strength. As you become part of our community, you’ll discover that we are dedicated to creating a positive impact, not only for our clients but also for the communities where we live and work. \n \n EEO DISCLAIMER \n Butler/Till is an Equal Opportunity Employer to all employees and applicants and prohibits discrimination and harassment of any kind without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. \n \n COMPENSATION \n Butler/Till is committed to providing pay transparency of our compensation philosophy and ensuring equitable pay practices for our employee owners. The compensation range for this position is $66,000- $104,000 and represents the annual salary range in Rochester, NY. Base pay offered may vary depending on multiple individualized factors, including location, skills, and experience.

Job Description Job Requirements: Experience and Education: -CDL-A with Tanker and Hazmat Endorsements -TWIC Card -At least 1 year of Class A Tractor Trailer Experience -Have or Be Willing to Obtain Passport Job Description: Compensation and Incentives -Average $1900-$2200 gross/week -72 CPM Loaded or Empty $10,000 Sign on Bonus -Best Driver Referral Program in the country- $3,000 to refer a driver + anadditional 5% of their total earnings! Run Details -Out 2-3 Weeks, Home 3-4 days -Consistent lanes of operation Benefits: -Medical -Dental/Vision -Basic Life/Voluntary Life -Short Term and Long Term Disability -Flexible Spending Account and Health Savings Account -Teladoc -Employee Assistance Program -401K Match and Roth Retirement Savings Plan -Additional Voluntary Benefits Equipment and Safety: -Road facing event recorder + Collision Avoidance -Truck Speeds - 68 mph on the pedal, 68 mph on cruise -Comprehensive industry renowned Hazmat Safety training Onboarding -Paid Orientation and on the job training -Fast interview and onboard process Apply athttps://intelliapp2.driverapponline.com/c/qualitycarriers?r=OTRnationwideEqual Employment OpportunitiesQuality Carriers, Inc. provides equal employment opportunities to all individuals regardless oftheir race, color, creed, religion, gender, age, sexual orientation, national origin, disability,veteran status, or any other characteristic protected by state, federal, or local law.Wage Range: $1900 per week - $2200 per week Weekly USDGeneral Description of Benefits: Benefits Paid Orientation and Paid On the Job Training Dedicated Driver Manager! Weekly Direct Deposit / No Hold Back! Stability You Can Count On - Over 100 Years in Business! Personal Wellness Program - Designed by Drivers for Drivers! Full Health Benefits - Low Cost, High Quality Options to Choose From! ( Dental, Vision, Life, Disability, Health) Short and Long Term Disability, Accident and Critical Illness Insurance Vacation Time and 401k with Company Match! Steady and Consistent Work, Freight is Year-Round! Employee Assistance Program

Butler/Till is a results-driven marketing agency offering deeply collaborative client experiences, proprietary technology, and world-class partnerships. At Butler/Till, we take immense pride in our independent, women-owned and led status, our unwavering commitment to a purpose-driven approach, and our unique structure as a 100% employee-owned company (ESOP). \n \n SUMMARY \n The Senior Media Operations Specialist (SMOS) has consistently demonstrated a level of accuracy and autonomy through their experience or tenure. Persons in this role have mastered all functionality of trafficking, Q/A, stewardship and have proactively influenced operational improvements. A SMOS has demonstrated impact via standard and error-free outputs, autonomous decision-making at critical junctures, accountability and deep platform subject matter expertise. In this role, the SMOS is the first point of contact for all creative and trafficking needs on unique accounts. \n \n KEY OUTCOMES & RESPONSIBILITIES \n Key Outcome: Best-in-class onboarding into the Media Operations Specialist role \n Key Responsibilities: \n\n • Through an established workflow, published SOPs, and best-in-class tools, technology, and resources, the SMOS is accountable for onboarding employees into the Media Operations Specialist role\n, • In conjunction with the Manager, Ad Operations, the Senior Media Operations Specialist is responsible for setting the systems and infrastructure for accurate deployment of client creative assets, ensuring materials are delivered precisely, timely and to the exact specifications as outlined in contractual agreements with stakeholders – internal and external\n, • Following predetermined evaluation periods, the SMOS will assess all onboarding documentation and make necessary updates to ensure alignment with current processes\n\n \n Key Outcome: Improved product quality, increased efficiency and productivity, reduced effort/costs and client satisfaction \n Key Responsibilities: \n\n • With an eye on standardization, quality, automation and continuous improvement, the SMOS will be responsible for continuous review and optimization of processes\n, • Accountable for process improvements through the lens of digital transformation, SMOS will provide ongoing training and support for the media operations specialist team\n, • Ensure that all campaign elements, such as creative assets, dynamic elements, and tracking codes, are correctly implemented and delivered to the channel teams\n\n \n Key Outcome: Streamlined communication within internal teams \n Key Responsibilities: \n\n • Facilitate clear and effective communication between account service, integrated planning, channel and media operations to ensure alignment on campaign creative, timelines, and deliverables\n, • Act as the first point of contact for resolving any issues or discrepancies that arise during the campaign lifecycle, coordinating with all teams to find solutions\n, • Provide training and support to internal teams on media operations processes and tools, ensuring they have the knowledge needed to manage client expectations effectively\n, • Foster a collaborative environment between teams, encouraging open communication and teamwork to achieve common goals\n\n \n Key Outcome: Agency-wide Dynamic Creative Optimization (DCO) expertise \n Key Responsibilities: \n\n • Manage and execute Dynamic Creative Optimization (DCO) campaigns across platforms (e.g., CM360, DV360, Meta, etc.), ensuring accurate setup, trafficking, and delivery\n, • Collaborate with Strategy, Creative, and Analytics teams to translate campaign objectives into dynamic creative frameworks, including audience segmentation, messaging variants, and feed logic\n, • Oversee creative feed onboarding, QA, and ongoing validation, ensuring data integrity and alignment with creative logic\n, • Troubleshoot and resolve issues related to feed ingestion, creative rendering, and dynamic logic application in partnership with internal teams and external vendors\n, • Conduct thorough QA of dynamic creatives, including scenario-based validation (audience, geography, device, etc.) to confirm correct variant delivery\n, • Partner with vendors to implement advanced DCO use cases, including real-time triggers and personalization strategies\n, • Act as a subject matter expert (SME) for DCO within Media Operations, contributing to best practices, SOP development, and training\n, • Identify opportunities to scale DCO adoption across clients and improve campaign performance through personalization\n, • Contribute to process standardization and automation for dynamic creative workflows\n\n \n Other Responsibilities: \n\n • Proactively support and participate in agency improvement initiatives\n, • Support other teams as time permits\n, • Other duties as assigned\n\n \n QUALIFICATIONS \n REQUIRED \n\n • Bachelor's degree in Communications, Public Relations, Marketing, Information Technology or a related field\n, • 4+ years of experience in related fields; Media, Analytics and/or Operations preferred\n, • Computer literacy to include proficiency with Microsoft Office Suite of Products (Word, Excel, PowerPoint)\n, • Must be detail oriented, multi–task and possess strong organizational skills\n, • Strong written and verbal communication\n, • Advanced Microsoft Excel skills\n, • Intermediate or higher familiarity with ad serving platforms (GCM360)\n, • Experience working with structured data feeds, including validation, transformation, and troubleshooting\n, • Familiarity with dynamic ad serving workflows within platforms like Campaign Manager 360 and rich media/DCO tools\n, • Strong QA mindset with ability to validate complex creative permutations at scale\n, • Ability to interpret and apply naming conventions, taxonomies, and feed schemas to ensure consistency across campaigns\n\n PREFERRED \n\n • High exposure to ad campaign management; ad trafficking, campaign setup, and monitoring\n, • Experience executing personalized or localized campaigns at scale (e.g., geo-targeted messaging, local-level creative, product-driven ads)\n, • Exposure to feed-based creative automation tools (e.g., Smartly.io, Google Studio, Celtra, Flashtalking, Jivox, AdForm)\n, • Understanding of data signals used in DCO, including first-party audience data, behavioral triggers, and contextual inputs\n, • Ability to partner cross-functionally to evolve DCO strategies and improve operational efficiency\n\n \n CORE COMPETENCIES \n\n • CUSTOMER FOCUS/CLIENT INTIMACY: Seeking to understand client business challenges/needs and delivering continuous value to our clients\n, • COLLABORATIVE: Working with teams and across the organization with ease\n, • OWNER AGILITY: Able to continuously learn and quickly adapt to changing circumstance\n, • RESULTS DRIVEN: Accepts accountability to deliver business outcomes, even under changing circumstances. Delivers on commitments\n, • DISCIPLINED: Thinks, plans, and prioritizes work on an ongoing basis, plans and aligns with key team members before acting\n\n \n WORK ENVIORNMENT & PHYSICAL DEMANDS \n The work environment and physical demands characteristics described here are representative of those an employee encounters while performing the essential functions of this job, typically in an office setting or in a home office. An employee in this role may be in a stationary position, often standing or sitting for prolonged periods and using office equipment and computers. The noise level in the office environment is usually moderate. (I.e., business office with computers and printers, light foot traffic, etc.). Reasonable accommodation may be requested to enable individuals to perform the essential functions. \n \n COMMITMENT TO DIVERSITY, EQUITY, INCLUSION AND BELONGING \n Our dedication to Diversity, Equity, Inclusion, and Belonging (DEIB) is a cornerstone of our culture. We believe that the diversity and inclusivity of our workforce are sources of strength. As you become part of our community, you'll discover that we are dedicated to creating a positive impact, not only for our clients but also for the communities where we live and work. \n \n EEO DISCLAIMER \n Butler/Till is an Equal Opportunity Employer to all employees and applicants and prohibits discrimination and harassment of any kind without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. \n \n COMPENSATION \n Butler/Till is committed to providing pay transparency of our compensation philosophy and ensuring equitable pay practices for our employee owners. The compensation range for this position is $48,000- $78,000 and represents the annual salary range in Rochester, NY. Base pay offered may vary depending on multiple individualized factors, including location, skills, and experience. \n \n This is just one component of Butler/Till’s total compensation package for employee owners. The total compensation package for this position may also include other elements, including ESOP (employee stock ownership plan), an annual bonus, in addition to a full benefits package, and paid time off benefits, including 100% paid parental leave. Details of participation in these benefit plans will be provided if an employee receives an offer of employment.

Job DescriptionMechanical Assembler ???? $19-$24/hr | ???? 1st Shift (7:00 AM - 3:30 PM) | ???? Rochester, NY Why Apply? ✅ Pay up to $24/hr ✅ Monday-Friday schedule ✅ Optional Saturday OT available ✅ PTO, holidays, and sick time ✅ Medical, dental, vision & 401(k) ✅ Career growth opportunities ✅ Small team environment with long-term stability Job Overview We're hiring a Mechanical Assembler to build and assemble mechanical components and equipment in a clean, team-oriented manufacturing environment. Ideal candidates are mechanically inclined, detail-oriented, and comfortable using hand and power tools. Responsibilities • Assemble parts using blueprints and work instructions, • Use hand tools, power tools, and measuring devices, • Perform quality inspections and verify dimensions, • Troubleshoot minor assembly issues, • Maintain a safe and organized work area Qualifications ✔ Mechanical assembly or manufacturing experience preferred ✔ Ability to read blueprints and assembly drawings ✔ Experience with hand tools and measuring equipment ✔ Strong attention to detail and quality ✔ Ability to stand for extended periods and lift materials as needed Benefits • 120 hours PTO + paid holidays, • Health, dental & vision insurance, • 401(k) plan, • Advancement opportunities Apply Today! Join a growing company that values craftsmanship, teamwork, and career development. Location: Rochester, NY Pay: $19.00-$24.00 per hour Schedule: Monday-Friday, 7:00 AM-3:30 PM Job Type & Location This is a Contract to Hire position based out of Rochester, NY. Pay and Benefits The pay range for this position is $20.00 - $20.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Rochester,NY. Application Deadline This position is anticipated to close on Oct 8, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

PEKO Precision Products: We Make Products That Matter\n \n \nPEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily.\n \n \nThe Opportunity: Quality Inspector\n \n \nPrimary Function: The Quality Inspector is responsible for conducting inspections of assemblies and machined parts. In this role, you will provide support to the Quality and Engineering teams in investigating corrective actions and uphold the maintenance of inspection records and documentation in accordance with government, customer, and company standards.\n \n \nEssential Functions\n\n • Perform dimensional inspections on both in-process and finished machined parts and products using measurement techniques and equipment.\n, • Inspect weldments and fabricated products\n, • Inspect the finished product (painting and powder coat)\n, • Inspect assemblies and sub-assemblies\n, • Use experience with common metrology tools including calipers, and micrometers to measure parts.\n, • CMM programming as needed.\n, • Assist with other duties as assigned by the Manager.\nReports To: Quality Manager\n \n \nBasic Qualifications\n\n • Minimum education level of High School, GED, or its equivalent\n, • Familiarity with ISO-compliant manufacturing environments\n, • Ability to read blueprints and proficient understanding of GD&T\n, • 3+ years of CMM operation/programming\nPreferred Qualifications:\n\n, • 5+ years of inspection experience in a precision machining environment\n, • 5+ years of CMM experience\n, • Previous exposure to operation and programming of CMM equipment\n, • Smart Scope vision system experience using ZONE3 Metrology Software\nWork Authorization: US Persons\n PEKO Perks:\n \n\n • Competitive Total Rewards\n, • Tuition Reimbursement (IRS Allowable pre-tax Max)\n, • 401K, Medical, Dental, Vision\n, • Flexible Spending & Health Savings Accounts\n, • Life, Short and Long-Term Disability\n, • Recognition Awards & Discretionary Benefits\nOur Core Values:\n \n\n • Compassion: We care about our talented and loyal PEKO family.\n, • Safety: We are committed to providing a safe, clean, and positive workplace.\n, • Integrity: We believe in transparency, honesty, and respect for all stakeholders.\n, • Agility: We are dedicated to maintaining an agile and financially prudent organization.\n, • Endurance: We foster the belief that PEKO people are resilient problem-solvers impacting the future.\n, • Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube\n\n \nOther:\n \n\n • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice.\n, • For more available opportunities at PEKO, please visit our website:\nJobs & Career Opportunities | Rochester NY | PEKO Precision Products\n \n \nA reasonable estimate of the compensation range for this position is $25.00 - $28.00 per hour, plus a 10% shift differential,.\n \n \nThe wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements.\n \n \nPEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training.

Job Description This position requires a self-motivated, highly organized, and detail-oriented individual responsible for the accurate receipt, identification, documentation, storage, and control of networking, telecommunications, data center, and related equipment. The Inventory Specialist is responsible for performing higher-level inventory functions within the company's ERP system, including completing inventory receipts, creating and maintaining inventory items, developing accurate product descriptions and part information, creating and managing storage bins, processing inventory transfers, and maintaining accurate physical and electronic inventory records. RESPONSIBILITIES: • Review purchase orders, receiving documentation, product information, and related records to determine inventory processing requirements and priorities., • Perform final receipt inspection and verification of incoming equipment prior to completing inventory receipt transactions., • Verify received products against purchase orders and related documentation to ensure correct part numbers, serial numbers, quantities, condition, configuration, and other required information., • Identify networking, telecommunications, data center, and related equipment using manufacturer labels, part numbers, serial numbers, physical characteristics, internal records, technical documentation, online research, and other available resources., • Research unfamiliar products and components to determine accurate manufacturer, model, part number, description, configuration, specifications, and other relevant product information., • Create new inventory items within the company's ERP system when appropriate and ensure item records are accurate, complete, and consistent with established standards., • Create and maintain accurate product descriptions, part information, manufacturer information, serial information, and other inventory-related data., • Process inventory receipts accurately within the company's ERP system and ensure physical product and electronic inventory records correspond before transactions are completed., • Generate, review, and apply inventory labels, serial number labels, bin labels, and other identification records as required., • Create, maintain, and utilize inventory bins and storage locations within the company's ERP and warehouse systems., • Determine appropriate inventory locations based on product type, size, quantity, configuration, accessibility, value, operational requirements, and available warehouse space., • Process inventory transfers and other inventory transactions to maintain accurate physical and electronic product locations., • Maintain chain of custody and product traceability as equipment moves between receiving, inventory, testing, refurbishment, quality control, fulfillment, asset recovery, and other operational areas., • Identify, investigate, document, communicate, and escalate discrepancies involving quantities, part numbers, serial numbers, product identification, condition, purchase orders, inventory records, labels, or physical locations., • Perform inventory research and reconciliation to resolve discrepancies between physical inventory and electronic records., • Conduct inventory audits, bin verification, cycle counts, location checks, and other inventory accuracy activities as assigned., • Determine appropriate labeling, organization, storage, and handling requirements for inventory based on product characteristics and operational needs., • Coordinate with Warehouse Associates and other Operations personnel to ensure products are properly labeled, moved, staged, organized, and stored., • Provide inventory processing direction and technical assistance to Warehouse Associates performing physical receiving, sorting, labeling, movement, and storage activities., • Pull, verify, and prepare inventory for sales orders, evaluations, projects, asset recovery, internal requests, and other operational requirements as assigned., • Review inventory records for accuracy, completeness, compliance with established procedures, and alignment with physical inventory., • Maintain accurate electronic and physical inventory records to support inventory integrity, product traceability, order fulfillment, and operational planning., • Move products between workstations, warehouse locations, storage areas, and designated staging areas using appropriate material-handling equipment., • Maintain clean, organized, accurately labeled, and safe inventory and warehouse areas., • Operate pallet jacks, carts, ladders, scanners, label printers, and other authorized warehouse and inventory equipment safely and efficiently., • Support receiving, warehouse, order processing, shipping, asset recovery, and other Operations activities as business needs require.EDUCATION, EXPERIENCE AND TRAINING:, • Experience working in inventory control, receiving, warehousing, fulfillment, or a related operational role is required., • Experience using an ERP, inventory management, warehouse management, or similar business system is required; NetSuite experience is preferred., • Experience performing inventory transactions including receipts, transfers, adjustments, bin management, or similar inventory functions is strongly preferred., • Experience creating or maintaining item records, product descriptions, part information, or similar inventory master data is preferred., • Experience researching and identifying products using manufacturer information, part numbers, technical documentation, online resources, or similar methods is preferred., • Experience performing inventory audits, cycle counts, reconciliation, or discrepancy investigation is preferred., • Experience using handheld scanners, label printers, barcode systems, and related inventory technology is preferred., • Experience working in a warehouse environment is required., • Experience working with networking, telecommunications, electronics, data center, or related technical equipment is preferred.To view a full Job Description, please click here. Powered by JazzHR RAgR7vSfgV

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SCHEDULE: Both day and night shift available: 7am-7pm OR 7pm-7am on a 2-2-3 schedule SUMMARY: Loading and unloading inbound and outbound trucks, staging material, inventory of raw materials, supplying machinery with raw materials and in-process rolls for production. Label and warehouse finished goods. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Participate in training, embrace concepts of and actively practice the SPOT Safety Program fundamentals to aid American Packaging Corporation’s efforts to achieve a zero-accident rate., • Safely operate all fork trucks (ride-on, scissor lift, and walk behind)., • Service manufacturing machines with proper raw materials (film, boxes, adhesives, glue, paper, etc.), • Remove (from the production floor) wrap and store all finished goods utilizing pallet location information., • Stage outbound shipments in an organized manner utilizing release information., • Communicate regularly with fellow S/R employees., • Load and unload freight as it arrives & leaves the facility., • Recharge and maintain all electric batteries on fork trucks., • Accurately complete all monthly cycle counts., • Receive material using AS400 system and make labels when requested., • Organize and stack all unused pallets., • Maintain a neat and orderly S/R work area., • Adhere to all company safety guidelines., • Able to work all scheduled shifts and assigned overtime., • Attend and participate in all company mandated meetings., • Business travel may be required., • Any other assigned duties.Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or GED, previous manufacturing experience preferred, but not necessary, and acceptable prior work history. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute percentages and interpret bar graphs. REASONING ABILITY Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand, walk, sit, reach with hands and arms, stoop, kneel, crouch or crawl, climb and balance. The employee is frequently required to use hands to finger, handle or feel objects, tools or controls. The employee is regularly required to talk or hear and taste or smell. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, distance and the ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee works near moving mechanical parts and is exposed to fumes or airborne particles (works in an environment where solvent based inks are used). The employee frequently works in high, precarious places, and is exposed to electrical shock (only authorized maintenance personnel are allowed access to electrical cabinets). The noise level in the work environment is usually loud. Hearing protection is mandated. Safety glasses and steel toed shoes with anti-static discharge soles are required. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: talentacquisition@americanpackaging.com.

Job DescriptionCompany Summary EchoStar is reimagining the future of connectivity. Our business reach spans satellite television service, live-streaming and on-demand programming, smart home installation services, mobile plans and products. Today, our brands include Boost Mobile, DISH TV, Gen Mobile, Hughes and Sling TV. The In-Home Services field professionals lead all field operations and thousands of technicians across nearly 100 facilities across the country. Devoted to building a collaborative and committed group of employees who manage inventory, fleet and performance - IHS is the driving force that connects our customers with the industry’s best products and services for DISH. Job Duties and Responsibilities The Inventory Specialist manages the flow of material and equipment (satellite dishes, our award winning receivers and DVRs and associated hardware) in and out of the warehouse supporting both our internal and external customers. Key Responsibilities: • Document the quantity and type of equipment, merchandise, and/or supplies stocked in the warehouse and/or on vans, as well as all materials needed for various installations and service calls, • Maintain an accurate physical count of van products, warehouse products, and saleable products on a daily, weekly, and/or monthly basis, • Receive returned equipment, new inventory, and vendor shipments; stock the inventory in the warehouse; prepare shipments for return to the re-manufacturing department, and record distributed hardware information in the computer tracking system, • Complete daily inventory transactions for all products used, linking them to the proper accounts, • Prepare equipment shipments to remote employees, ensuring accurate documentation and timely deliverySkills, Experience and Requirements Skills and Qualifications: • Must possess a valid driver's license in the State you are seeking employment in, with a driving record that meets DISH's minimum safety standard, • Willingness to work flexible hours, including weekends, and will be compensated for overtime, • Employees must frequently lift and/or move up to 75 pounds, and may occasionally be required to lift up to 125 pounds, • Employees must be able to safely operate warehouse equipment (pallet jack, and/or a forklift), • Utilize computer systems and inventory tracking programs to manage and update inventory records efficiently and accurately Visa sponsorship not available for this role Benefits We offer versatile health perks, including flexible spending accounts, HSA, a 401(k) Plan with company match, ESPP, career opportunities, and a flexible time away plan; all benefits can be viewed here: EchoStar Benefits. The base pay range shown is a guideline. Individual total compensation will vary based on factors such as qualifications, skill level, and competencies; compensation is based on the role's location and is subject to change based on work location. Candidates need to successfully complete a pre-employment screen, which may include a drug test and DMV check. Our company is committed to fostering an inclusive and equitable workplace where every individual has the opportunity to succeed. We are dedicated to providing individuals with criminal or arrest records a fair chance of employment in accordance with local, state, and federal laws. The posting will be active for a minimum of 3 days. The active posting will continue to extend by 3 days until the position is filled. We pride ourselves on developing and promoting talent as an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. EchoStar will accommodate the sincerely held religious beliefs of employees if such accommodations are not undue hardships and are otherwise within the bounds of applicable law. All qualified applicants with arrest or conviction records will be considered for employment in accordance with local, state, and federal law. You may redact any information that identifies age, date of birth, or dates of school/graduation from your application documents before submission and throughout our application process. EchoStar will provide reasonable accommodation to otherwise qualified job applicants and employees with known physical or mental disabilities, unless doing so poses an undue hardship on the Company, poses a direct threat of substantial harm to others, or is otherwise not required by law. EchoStar has a more detailed Accommodation Policy that applies to employees. EchoStar endeavors to make echostar.com and jobs.echostar.com accessible to users. Please contact leaves@dish.com if you would like to discuss the accessibility of our website or need assistance completing the application process. This contact information is for accommodation requests only; do not use this contact information to inquire about the status of applications. Click the links to access the following statements: EEO Policy Statement, Pay Transparency, EEOC Know Your Rights (English/Spanish)

Job DescriptionCompany Overview: At Monster Tree Service, we are committed to our core values built on being tree care professionals, strong relationships, an openness to learning & working as a team, and being safe. Our tight-knit team of dedicated professionals takes pride in providing exceptional tree care services to our valued clients in the Rochester and Finger Lakes areas. Position: Tree Climber About the Role: Are you a reliable and hard-working professional with a passion for outdoor work? If so, we invite you to join our team as a Tree Climber! In this role, you'll be responsible for delivering top-notch arboriculture services, all while embodying our core values. Our commitment to safety, professionalism, and open-minded collaboration sets us apart in the industry. Responsibilities: • Safely climb, prune, and remove trees on residential and commercial properties., • Maintain and operate all equipment, including hand tools, chainsaws, chippers, and climbing gear., • Work seamlessly as part of a crew under the guidance of our Crew Foreman., • Prioritize and deliver excellent customer service, reflecting our values of respect and professionalism.Requirements:, • Demonstrated climbing experience using rope and saddle for pruning, with proficiency in knots, chainsaw operation, and chipper operation., • Familiarity with Aerial Lifts (bucket truck and/or spider lifts) and adherence to ANSI standards which includes using proper PPE (we take this seriously)., • Valid driver's license, clean driving record, and reliable transportation., • Experience with driving non-CDL trucks with trailers., • Knowledge of crew management, training, customer service, and safety procedures is highly valued., • Excellent listening and verbal communication skills., • Willingness to learn and ability to follow instructions., • Physical stamina and the ability to lift up to 50 pounds., • Comfort working outdoors in various weather conditions.What We Offer:, • Competitive wages ($20-$26/HR Depending on Experience)., • Comprehensive training and year-round employment., • Access to state-of-the-art equipment., • A positive and respectful work environment that values being open to learning and working as a team., • Opportunities for professional growth within the company., • Paid time off & holiday pay., • Profit-sharing and 401K benefits., • Continuing education opportunities.How to Apply: If you are an organized and motivated individual looking for a hands-on opportunity to work outdoors and share our commitment to professionalism, strong relationships, open to learning and working as a team, and being safe, we would love to have you apply for this position. Join our Monster Team and take your career to the next level! You are applying for work with a franchisee of Monster Tree Service, not Monster Franchising SPE, LLC or any of its affiliates. If hired, the franchisee will be your only employer. Franchisees are independent business owners who are solely responsible for their own employees. An Equal Opportunity Employer We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Warehouse Associate Join Our Dynamic Distribution TeamOverview Parksite and Atlantic plywood, a 100% employee-owned company, is seeking motivated and detail-oriented Warehouse Associates to join our growing distribution operations. This is an excellent opportunity for individuals who thrive in a fast-paced environment and want to build a career in the wholesale building materials industry. Whether you're an experienced warehouse professional or new to the field, we offer comprehensive training, competitive benefits, and real opportunities for advancement. Why Join Our Team? Build Your Career in a Thriving Industry • Work with industry-leading building materials and products, • Gain valuable skills in warehouse operations, inventory management, and logistics, • Opportunity to operate multiple types of forklifts and advanced warehouse technology, • Employee ownership through our Employee Stock Ownership Plan (ESOP) Comprehensive Benefits Package • 401(k) Program to secure your financial future, • Company-Paid Life Insurance, • Health, Dental, Vision, and Flexible Spending Insurance Plans, • Paid Holidays, • Paid Time Off (PTO), • Positive Work Environment with supportive team members, • Bonus Incentives for employee referrals Professional Development • Comprehensive forklift training and certification, • Training on state-of-the-art voice-picking systems, • Warehouse Management System (WMS) experience with Infor/CSD platforms, • Safety training and OSHA compliance education What You'll Do As a Warehouse Associate, you'll play a critical role in our daily operations, ensuring products are received, stored, and distributed efficiently and safely. This is a non-exempt, hourly position eligible for overtime in accordance with applicable law. Shipping & Order Fulfillment • Use voice-picking technology to accurately pick, pack, and prepare customer orders, • Assemble and verify orders for accuracy and quality before shipment, • Load outbound shipments and process orders using the Infor/CSD/WMS platform Receiving & Inventory Control • Unload and inspect inbound merchandise for accuracy and quality, • Check in products against purchase orders and apply SKU labels, • Move, sort, and store materials in designated locations for efficient retrieval Forklift & Equipment Operation • Safely operate sit-down forklifts, reach trucks, and cherry pickers after successful completion of company-provided training and OSHA-required certification, • Transport, stack, and store pallets following all safety guidelines Manufacturing • Operate and monitor manufacturing machinery to ensure efficient production, quality standards, and safe operation while performing routine inspections and adjustments as needed. Inventory Management • Assist with physical inventory and scheduled cycle counts, • Identify and report inventory discrepancies, • Maintain organized storage areas to support operational efficiency Safety & Housekeeping • Maintain a clean, organized, and safe work environment, • Wear required PPE including steel-toed boots, safety glasses, and gloves, • Follow all safety policies and report hazards or equipment issues immediately, • Work safely in indoor, outdoor, hot, and cold environments General Responsibilities • Follow company policies and supervisor instructions, • Collaborate with team members to meet productivity goals, • Perform additional duties as assigned, • Maintain a positive, customer-focused attitude What You BringRequired Qualifications: Education & Experience • High school diploma or GED preferred, • Minimum 3 months of warehouse experience or equivalent training/education, • Training provided for candidates new to warehousing Skills & Abilities • Basic English reading and writing skills sufficient to understand safety instructions, labels, and operating procedures. Basic math skills (addition, subtraction, multiplication, division), • Strong organizational skills with attention to detail, • Ability to work independently and as part of a team, • Dependable, punctual, and safety-focused Physical Requirements The physical requirements represent the essential functions of the role. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform these essential functions, in accordance with applicable law. • Ability to regularly lift up to 50 lbs. and occasionally up to 90 lbs., • Ability to stand, walk, bend, and reach for extended periods, • Comfortable working in indoor/outdoor environments, including hot and cold conditions, • Ability to safely operate warehouse equipment and machinery Pre-Employment Requirements • Ability to pass pre-employment physical, drug screen, and background check, • Authorization to work in the United States Preferred Qualifications: The following is a plus but not required - we're willing to train motivated candidates! • Forklift operation experience (sit-down, cherry picker, reach truck), • Voice-picking system experience, • Lumber or building product industry experience, • Receiving and shipping experience, • Inventory control experience, • WMS (Warehouse Management System) familiarity, • Previous experience in a distribution or warehouse environment Work Environment This position is in a warehouse distribution center with the following conditions: Physical Demands & Work Environment: • Frequent use of hands and feet for grasping, lifting, securing loads, and operating equipment controls, • Regular lifting, carrying, pushing, and pulling up to 50 lbs.; occasional lifting up to 90 lbs., • Frequent pushing and pulling of truck side-curtain walls and use of winches and ratchet straps for load securement, • Extended periods of standing and walking during scheduled shifts. Frequent bending, twisting, reaching, gripping, and handling materials such as pallets, panels, lumber, straps, and tools, • Occasional climbing, squatting, and kneeling to complete assigned tasks, • Extended operation of forklifts, including frequent mounting and dismounting during picking, staging, and loading, • Ability to work at varying heights when placing or retrieving product from racking, • Maintain balance, depth perception, and spatial awareness while operating forklifts in tight aisles and around moving equipment, • Exposure to bright lights, loud noise, dust, fumes, and varying temperatures, including hot and cold environments Schedule: • Full-time position, • Day shift schedule (typical warehouse hours), • Flexibility to work overtime during peak periods as needed About Our CompaniesParksite Parksite is a premier sales, marketing, and distribution company serving the building industry with a focus on both interior and exterior products. We supply top fabricators and building material dealers with category-leading products for residential, commercial, and remodeling markets. Our unique marketplace niche is education. We identify products with distinctive applications and educate architects, builders, and designers on their value. This approach has made us an industry leader with each product line we represent. We combine marketing expertise and industry knowledge to create demand for our supplier business partners. We help build brands. Atlantic Plywood Corporation (APC) Since 1974, Atlantic Plywood Corporation has delivered the highest quality and best value to our customers. This philosophy has helped us grow into a regional industry leader, distributing a wide range of quality hardwood plywood and panel products throughout the Eastern United States. Our many satisfied customers know that Atlantic Plywood offers not only dependable products and services but also a convenient, cost-effective partnership that helps their business grow. Career Growth Opportunities Starting as a Warehouse Associate opens doors to advancement within our organization: • Lead Warehouse Associate - mentor new team members and coordinate daily operations, • Inventory Control Specialist - focus on accuracy and efficiency improvements, • Warehouse Supervisor - manage teams and operations, • Shipping/Receiving Coordinator - oversee logistics and transportation, • Forklift Trainer - become certified to train other operators, • Logistics & Operations Management - advance into leadership roles, • CDL License - Potential to earn CDL License through company-sponsored training for qualified employees. Ready to Build Your Future with Us? Join a team where your hard work is recognized and rewarded. As a Warehouse Associate, you'll gain valuable skills, work with quality products, and become part of an employee-owned company that invests in your success. We are Equal Opportunity Employers committed to building diverse and inclusive teams. How to Apply If you're ready to join a dynamic team in the wholesale building materials industry, we want to hear from you! Apply today and take the first step toward a rewarding career with growth potential. Qualifications are a guide, not a checklist. If you think you can make an impact here, we want to hear your story. All warehouse positions require adherence to safety protocols, OSHA regulations, and company procedures. Associates must be able to work in varying environmental conditions and operate equipment safely. Monday - Friday 7:00AM - Until the work is finished.

Job Description The Material Handler – Aftermarket Merchandise & Fulfillment Specialist plays a critical role in supporting warehouse, retail, and e-commerce operations through the receipt, processing, evaluation, storage, and distribution of merchandise. This position is responsible for maintaining inventory accuracy, fulfilling customer and store orders, supporting product flow, conducting jewelry metal testing, and assisting with inventory optimization initiatives. The successful candidate demonstrates strong organizational skills, attention to detail, and a commitment to safety, quality, and operational excellence. COMPETENCIES: Inventory Accuracy, Attention to Detail, Safety Awareness, Organization & Product Flow, Order Fulfillment, Adaptability, Quality Focus, Problem Solving, Teamwork & Collaboration, Integrity & Asset Protection ESSENTIAL DUTIES & RESPONSIBILITIES Inventory Management & Material Handling – 20% • Receive, inspect, unload, and process incoming merchandise and donated goods., • Sort, organize, and store products in designated warehouse locations., • Maintain inventory accuracy through proper handling and documentation procedures., • Assist with inventory transfers between warehouse and retail store locations., • Support cycle counts, physical inventories, and inventory reconciliation activities., • Report inventory discrepancies, damages, or shortages to leadership. Order Fulfillment & Distribution – 30% • Pick, pack, and stage merchandise for retail stores, e-commerce customers, wholesale accounts, and special projects., • Prepare shipments according to established operational procedures and timelines., • Load and unload merchandise using approved material handling equipment and safe work practices., • Verify order accuracy, product quantities, and shipment documentation prior to distribution., • Support store replenishment and bulk merchandise distribution initiatives. E-Commerce Shipping & Fulfillment – 15% • Accurately process e-commerce orders from receipt through shipment., • Package merchandise to ensure product protection and customer satisfaction., • Utilize approved shipping systems and carrier platforms to create shipping labels and process orders., • Verify product descriptions, quantities, and order details before shipment., • Process customer returns and assist with inventory adjustments related to e-commerce activity., • Maintain shipping supplies and organized workstations to support efficient fulfillment operations., • Monitor fulfillment timelines to ensure orders are processed within service expectations. Product Purging & Inventory Optimization – 5% • Identify slow-moving, aged, damaged, obsolete, or unsellable merchandise., • Assist in inventory reduction efforts through transfers, liquidation, recycling, or disposal processes., • Maintain records of inventory adjustments and product disposition activities., • Support warehouse organization and space utilization initiatives., • Collaborate with leadership to improve inventory turnover and product flow., • Assist in maintaining inventory levels that support operational efficiency and business objectives. Jewelry Evaluation & Metal Testing – 15% • Conduct basic jewelry evaluations using approved testing methods and equipment., • Identify and classify precious metals including gold, silver, platinum, and other valuable materials., • Sort jewelry based on quality, value, and organizational guidelines., • Maintain accurate records of jewelry evaluations and testing results., • Ensure the proper handling, storage, and security of valuable merchandise., • Communicate findings regarding potentially high-value items to leadership. Warehouse Operations - 10% • Assist with merchandise processing, labeling, tagging, and preparation for sale., • Maintain clean, organized, and efficient work areas., • Follow established warehouse procedures and productivity standards., • Support departmental projects, operational initiatives, and seasonal business needs., • Contribute to continuous improvement efforts that increase efficiency and effectiveness. Safety & Compliance – 5% • Adhere to all organizational safety policies and procedures., • Use proper lifting techniques and safe material handling practices., • Report unsafe conditions, equipment concerns, and workplace hazards immediately., • Safely operate pallet jacks, carts, and other approved equipment., • Maintain compliance with all company policies, asset protection standards, and regulatory requirements. REQUIRED EDUCATION AND EXPERIENCE: • High School Diploma, GED, or equivalent preferred., • Experience working in warehouse, distribution, retail, logistics, or material handling environments preferred, • Experience supporting inventory control, shipping, and order fulfillment activities preferred, • Familiarity with shipping systems, inventory management processes, and e-commerce operations is preferred., • Experience handling high-value merchandise and maintaining accuracy, security, and attention to detail in a fast-paced environment is beneficial. PHYSICAL DEMANDS: PHYSICAL AND WORKING ENVIRONMENT Rarely (less than 0.5 hours per day) Continually (5.6 - 8.0 hours per day) Occasionally (0.6 - 2.5 hours per day) Frequently (2.6 - 5.5 hours per day) N/A = Not Applicable Weight: Up to 10Ibs; Up to 20lbs; Up 35lbs; Up to 50lbs; Greater than 50lbs Activity Rarely, Occasionally, Frequently, Continuously or N/A

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. Join Us - Sign-On Bonus Included! shift schedule: 12 Hour Days: This is a day shift position, with hours from 6:00 AM to 6:00PM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. .job purpose: The Packaging Operator operates, sets up, changes over, troubleshoots, and cleans either sleeving, case packing, or palletizing equipment. This position ensures the manufactured products meet specifications, makes minor adjustments as necessary, clears any jams that may occur, and prepares the equipment for cleaning. They continuously feed various materials into the machines such as sleeves, corrugate, shrink film, glue, pallets, and stretch wrap. They adhere to food processing requirements verified by routine quality checks and maintain food safe practices for the entire duration of operation. responsibilities: • Follow all safety, working, and Good Manufacturing Practices (GMP) rules., • Report to and follow the directions of the Production Supervisors., • Demonstrate the ability to safely operate moving equipment and make the appropriate adjustments within process limits in order to package accurate and defect-free cases with sleeved bottles., • Observe machine operations to ensure quality conformity to specifications and standard operating procedures for all packaged products., • Inspect packaged product throughout the process including filled bottles, sleeved bottles, formed cases, shrink wrapped cases, and full pallets to verify all meet finished specifications then adjust the process as needed while escalating issues to a supervisor., • Supply packaging equipment with materials such as sleeves, corrugate, shrink film, glue, pallets, and stretch wrap., • Periodically count and record all finished or rejected materials., • Clean the packaging equipment, ancillary tools, conveyors, and surrounding areas. Maintain the entire packaging line in audit ready condition both during and after production., • Proactively monitor the production line, packaging equipment, and surrounding conveyors to watch for any problems including backups, jams, or rejects. Efficiently resolve stoppages and continue production in a timely manner while recording all downtime reasons., • Stop and address machines when faults occur, clear machine jams, then report malfunctions to the appropriate supervisor and/or technician., • Troubleshoot problems, perform minor repairs using the correct tools, and participate in Preventive Maintenance on the packaging equipment., • Demonstrate proactive monitoring skills, using visual observation of gauges and listening to mechanical sounds to ensure equipment is functioning properly. Inform maintenance of suspected issues if unable to correct., • Aid in the training of new personnel or upskilling of team members., • Perform other duties as assigned by management. skills/qualifications required: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be provided to enable individuals to perform the essential functions. • A High School diploma or General Education Degree (GED) required., • Strong verbal and written communication skills., • Basic computational skills including simple math and reasoning required., • Must be able to operate the equipment effectively after the appropriate training period., • Must have the ability to troubleshoot small problems and escalate accordingly for those requiring additional expertise., • Must work in a safe, efficient manner while adhering to all safety procedures., • Must possess or be able to obtain an Industrial Truck Operator License., • Ability to handle ambiguity and work in a fast paced, entrepreneurial environment., • Proficiency in English: Comfortable with both written and verbal communication, including reading and writing. working conditions and physical requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Sitting/Standing/Walking/Lifting/Carrying – The Packaging Operator stands throughout their shift and walks on uneven concrete or tile surfaces. They lift full packaged cases to conduct routine checks and load material onto the equipment infeed areas., • Pushing/Pulling/Bending/Stooping – The Packaging Operator pushes/pulls rolls of labels onto sleever and stacks collapsed boxes on a pallet or places into a recycling container. The Packaging Operator pushes/pulls while using brooms, dust mops, and brushes during cleanup duties. The Packaging Operator bends/stoops occasionally throughout the workday for varying lengths of time, especially to maintain the corrugate material feed level for the packer., • Squatting/Kneeling/Crawling/Twisting/Turning – The Packaging Operator may squat to pick up product from the floor, or during various cleanup duties. There will be occasional twisting and turning at the waist is used when loading material, or when performing routine responsibilities., • Climbing/Balancing/Reaching – The Packaging Operator steps on and off the platforms and climbs stairs to access equipment. The Packaging Operator reaches below and/or above shoulder level when removing or adding boxes to a pallet, loading materials, and dumping unfinished product components., • Grasping/Manipulation – The Packaging Operator will engage in frequent use of hands and fingers for pressing buttons, opening equipment doors, typing on a keyboard, clearing jams, executing changeovers, and performing quality checks. food safety requirements: • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer, and/or Government requirements and standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to food safety and the quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to food safety and the quality of ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming products in terms of food safety and quality issues until the deficiency or unsatisfactory condition has been corrected., • In the event of an absence, another employee with the same skill level will assume the duties and responsibilities as required. how fairlife nourishes you: At fairlife, we believe in better — and that includes how we support our people. We offer a comprehensive suite of benefits and wellbeing resources designed to support you physically, emotionally, socially, and financially, both in and out of work. • Comprehensive medical, dental, and vision coverage, effective day one!, • Supplemental health plans (hospital indemnity, accident, and critical illness insurance), • Paid Time Off to recharge and support work-life balance, • Paid parental leave & adoption assistance (up to $10,000), • Parental support & family care benefits, including childcare resources and lactation support, • 401(k) to support retirement planning with up to 9% in employer match, • Wellness reimbursement (up to $500 for qualified wellbeing expenses), • Employee Assistance Program (EAP) for emotional wellbeing and work-life support, • Company-paid life insurance and short-term disability, • Employer HSA funding (for HDHP participants), • Tuition reimbursement (up to $10,000) and student loan repayment ($200/month), • Learning & development programs to unlock your full potential, • Rewards & recognition, matching gifts, free product, and Business Resource Groups fairlife's nour!sh program is designed to meet you where you are — supporting your individual wellbeing journey while enabling you to do your best work every day. position location: Webster, NY reports to: Packaging Supervisor travel requirements: little to none exempt/nonexempt: nonexempt This position is eligible for bonus. *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range: $24—$25 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email careers@fairlife.com. For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job Description BILL'S CARPET CENTER ACCOUNTS PAYABLE SPECIALIST & CFO ASSISTANT Job Type: Full-time, 40 hours per week Schedule: Monday-Friday, 9:00 a.m.-5:30 p.m. Pay: $20.00-$22.00 per hour, depending on experience Experience: 3+ years of relevant experience Build a Career Where Accuracy and Initiative Matter Bill's Carpet Center is seeking an experienced, organized, and dependable Accounts Payable Specialist & CFO Assistant. This full-time role combines core accounts payable work with financial, administrative, inventory, and operational support. It is a strong fit for someone who enjoys variety, follows details through to completion, and communicates effectively across departments and with vendors. What You Will Do Accounts Payable & Vendor Support Enter vendor bills, match purchase orders to order confirmations, and reconcile vendor statements. Prepare accounts payable check runs and online vendor payments. Research vendor order status, follow up on vendor claims, and process credit memos and consumer claims. Match company credit card transactions to receipts and prepare vendor credit applications. Maintain inventory stock cost valuations. Financial & CFO Support Record customer credit card payments and send paid invoices. Assist with daily and monthly bank reconciliations, check deposits, and payment confirmations. Support positive pay review and approvals for checks and ACH transactions. Provide support for monthly financial statements, accounts receivable, collections, customer statements, COD tracking, and audit requests. Coordinate W-9 and certificate of insurance requests, annual 1099 subcontractor reporting, and requesting customer capital improvement, resale, and sales tax exemption forms. Inventory, Operations & Administration Assist Operations with vendor ordering, showroom pricing updates, warehouse inventory counts, and inventory variance reporting. Review customer and warehouse sign-off documentation and attach supporting records to customer invoices. Coordinate insurance claims, facilities maintenance requests, and IT needs with third-party providers. Maintain account login records, assist with QuickBooks user access and training, order office supplies, answer phones, and provide general administrative support. Pick up customer checks and complete other CFO support tasks as needed. What You Bring At least 3 years of relevant accounts payable or accounting support experience. Strong attention to detail, follow-through, organization, and ability to manage multiple priorities. Comfort working with vendors, financial records, inventory information, and confidential business information. Working knowledge of QuickBooks and Microsoft Office is required. Clear, professional communication and a willingness to assist across accounting, operations, and administration. A valid driver’s license in good standing, held for at least 3 years. Compensation & Benefits $20.00-$22.00 per hour, depending on experience. Health insurance eligibility after 6 months. 401(k) with company match. $50 monthly cell phone reimbursement. Consistent Monday-Friday schedule, 40 hours per week. Varied exposure to accounting, operations, inventory, and administration. Driver’s License Requirement Before hire, the selected candidate must provide a copy of their driver’s license and authorize a Motor Vehicle Report for review by the company’s insurance providers.

Job Description Accounts Payable & Accounting Specialist - Direct Hire! TES Staffing is partnering with a well-established and growing organization in the Rochester area to identify an Accounts Payable & Accounting Specialist to join their finance team. This role plays a critical part in ensuring the accuracy and efficiency of the organization’s accounts payable process while supporting broader accounting operations, including month-end close activities. The ideal candidate will bring strong attention to detail, organizational skills, and a solid understanding of bookkeeping practices. This individual will collaborate closely with the accounting team to maintain accurate financial records, resolve discrepancies, and ensure vendors are paid accurately and on time. Compensation starting between $55-60K annually, with the opportunity to grow based on experience and performance. Key Responsibilities • Manage the full accounts payable process, including invoice review, coding, and entry into the accounting system, • Assign vendor numbers and verify correct general ledger and accounting codes, • Maintain vendor records and ensure accurate supplier information and invoice documentation, • Investigate and resolve vendor inquiries and payment discrepancies in a timely manner, • Match invoices with packing slips and receiving documentation to ensure accuracy, • Prepare, process, and distribute vendor payments, including check runs, • Maintain organized and compliant accounting files and documentation, • Reconcile EFT bank statements and company credit card statements, ensuring proper GL coding, • Prepare weekly general ledger proof reports, • Assist with monthly purchase journal reconciliation and tax summary preparation for the accounting team, • Support month-end closing activities and other accounting initiatives as needed, • Perform additional accounting or administrative duties as assigned Required Skills & Qualifications • Strong understanding of bookkeeping principles and generally accepted accounting practices, • High proficiency in Microsoft Office, particularly Excel and Word, • Experience working with accounting software systems, • Exceptional organizational skills and attention to detail, • Ability to manage multiple priorities and meet deadlines, • Strong written and verbal communication skills, • Ability to follow both written and verbal instructions with accuracy Education & Experience • High School Diploma or equivalent required, • Associate’s Degree in Business, Accounting, or a related field preferred, • 2–4 years of bookkeeping or accounting experience required Physical Requirements • Ability to sit, stand, walk, and use hands frequently throughout the workday, • Occasionally required to reach, bend, stoop, kneel, crouch, or crawl, • Must be able to lift and/or move up to 50 pounds when necessary\nCompany Description TES Staffing is a regional staffing and HR services company. We work with Western NY's top companies to offer our applicants a wide variety of choices when looking for their next career opportunity. We will work with you to identify your strengths and try to match you up with the right job opening we have at that point in time. We look forward to working with you and cannot wait for you to create your future together! TES Staffing is a regional staffing and HR services company. We work with Western NY's top companies to offer our applicants a wide variety of choices when looking for their next career opportunity. We will work with you to identify your strengths and try to match you up with the right job opening we have at that point in time. We look forward to working with you and cannot wait for you to create your future together!

Job Description Diamond Packaging, a global leader specializing in developing innovative and sustainable packaging solutions, is currently recruiting for a full time Printing Press Operator in our Printing Department to join our Team. Diamond Packaging is an award winning, woman-owned business that offers exceptional benefits to include: • Medical and dental insurance available on day of hire, • Company pays 63-70% of Excellus medical plans (no high deductible), • 401k participation after 30 days with company match, • Vacation and personal time off starting immediately Primary responsibility will be to review contents of folder and plates to ensure correct ink color and type, complete Line clearance procedures and documentation. Continually monitors sheet throughout run to ensure, as well as maintain, the highest level of quality possible and verify correct count was run to satisfy customer quantity. Also, responsible for the purging of the area of any related materials keeping a clean machine and surroundings in accordance with company outlines and policies. Minimum Qualifications: • 5 years experience in a sheet-fed shop on multicolor equipment with coater., • Candidate must be shift flexible., • Mechanical aptitude and understanding of printing process., • Ability to decipher color variance., • Will be required to have Color Blindness Ishihara Testing., • Heidelberg experience preferred., • Shows initiative and is self-motivated., • Good attendance record and ability to work any shifts needed., • Good communication skills, both written and verbal., • Ability to work in and as a team with all employees., • Demonstrates the ability to set up all feeder adjustments (double sheet detector, squeeze up headstops, etc.), • Able to mount printing plates on units and register color to color., • Demonstrates quality awareness., • Understanding of wash-up on press., • Knowledgeable of console operation and press computer., • Able to work overtime when needed. 2nd Shift (3pm - 11pm)

Job DescriptionJob Title: Skilled Laborer (Construction) - Concrete FinisherJob Description Join our team as a Skilled Laborer, specifically focusing on concrete finishing for commercial construction projects. You will work alongside experienced laborers to ensure the successful completion of various construction tasks. Responsibilities • Collaborate with skilled laborers on commercial construction tasks., • Perform concrete finishing with precision and attention to detail., • Ensure safety standards are met according to OSHA regulations.Essential Skills, • General labor experience in a construction setting., • Proficiency in concrete finishing with at least 5 years of experience., • Possession of OSHA 10 certification.Additional Skills & Qualifications, • Reliable transportation to and from work sites., • Experience in commercial construction projects.Why Work Here? Our company offers the opportunity to work on high-profile commercial projects, along with comprehensive medical, vision, and dental coverage. We also provide a 401k plan with matching contributions, ensuring a secure and rewarding career path. Work Environment You will be working in a dynamic commercial construction environment, where adherence to safety regulations and teamwork are paramount. Job Type & Location This is a Permanent position based out of Rochester, NY. Pay and Benefits The pay range for this position is $30.00 - $31.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Rochester,NY. Application Deadline This position is anticipated to close on Oct 8, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Position Summary Reporting to Manufacturing Leadership, the Senior Manufacturing Supervisor is responsible forleading manufacturing operations and teams to achieve production, quality, safety, and efficiencygoals while driving operational excellence through Lean Daily Management. This role is responsible for implementing process improvements, executing change initiatives, andeffectively managing labor resources to enhance efficiency, quality, and safety. With a proven trackrecord in lean methodologies and manufacturing leadership, the supervisor will foster a culture ofcontinuous improvement and accountability, ensuring the organization remains agile, responsive,and competitive in a dynamic production environment. Key Responsibilities • Oversee daily manufacturing operations to ensure production schedules, quality standards,yield targets, and safety requirements are consistently achieved or exceeded., • Lead, coach, and develop manufacturing teams of up to 25 employees, fostering a culture ofengagement, accountability, and continuous improvement., • Execute Lean Daily Management practices and apply lean manufacturing tools to eliminatewaste, improve efficiency, and streamline operations., • Analyze production data, performance metrics, and KPIs to identify trends, implementcorrective actions, and drive operational improvements., • Manage labor planning and resource allocation to ensure optimal staffing levels and efficientoperational performance., • Partner with Quality, Engineering, Supply Chain, Maintenance, Human Resources, Facilities,Occupational Health, Security, and other stakeholders to support manufacturing objectives., • Ensure compliance with company policies, safety regulations, quality requirements, andmanufacturing procedures., • Communicate operational performance, challenges, and improvement initiatives to leadershipwhile supporting business-critical decision-making. Requirements • Bachelor's Degree (Technical or Business-related field preferred), • 5+ years of manufacturing experience in a regulated manufacturing environment., • 10+ years of experience leading teams, managing employee performance, training, payroll, staffing, and employee relations. • Advanced knowledge of lean manufacturing principles, implementation, and practical application of tools such as Value Stream Mapping (VSM), Process Mapping, 6S, change management and Kaizen., • Demonstrated success driving operational excellence, KPI oversight, productivity improvements, and workforce engagement initiatives., • Strong communication, leadership, problem-solving, and critical-thinking skills., • Ability to manage multiple priorities, execute with urgency, and consistently meet business objectives and deadlines. You should be proficient in: • Bachelor's Degree, • Data Analysis and Manipulation, • Labor Management Systems Knowledge, • Continuous Improvement, • FDA Regulations, • Kaizen, • Lean Manufacturing Principles, • Operational Metrics & KPI Management, • Good Manufacturing Practices (GMP), • Scheduling Experience, • High-level Operations Analysis, • Quality Control Data Analysis, • Experience in a Manufacturing Environment

Job Description⚡ Panel Builders / Electrical AssemblersBuild Innovative Control Panels | Earn Up to $29/Hour Are you someone who enjoys working with your hands, reading blueprints, and bringing complex systems to life? We're looking for skilled Panel Builders and Electrical Assemblers to join a growing manufacturing team where craftsmanship, quality, and teamwork make a real impact every day. This is more than just an assembly job. You'll be building custom electrical panels and control systems that help power industrial operations across a variety of industries. If you're looking for a career with long-term stability, competitive pay, and opportunities for advancement, we want to hear from you. ???? Compensation Up to $29.00 per hour, based on experience, skills, and technical knowledge. ???? What You'll Be Building • Assemble custom electrical control panels and industrial equipment, • Install and wire electrical components according to schematics and blueprints, • Route, terminate, and label wiring with precision, • Use hand tools, power tools, and testing equipment, • Read and interpret wiring diagrams, layout drawings, and work instructions, • Inspect finished assemblies to ensure quality and compliance, • Troubleshoot minor assembly and wiring issues as needed, • Support continuous improvement and production efficiency initiatives???? What Makes You a Great Fit, • Experience in panel building, electrical assembly, manufacturing, or mechanical assembly, • Ability to read blueprints, schematics, and wiring diagrams, • Comfortable working with hand and power tools, • Strong mechanical aptitude and problem-solving skills, • High attention to detail and commitment to quality workmanship, • Reliable attendance and a positive team-first attitude???? Why People Join Our Team✅ Earn Up to $29/Hour Be rewarded for your experience and technical abilities. ✅ Consistent First Shift Schedule Monday-Friday | 7:00 AM - 3:30 PM Enjoy your evenings and weekends off. ✅ Outstanding Benefits Package • Medical, Dental & Vision Insurance, • Paid Time Off, • Paid Holidays, • New York State Sick Leave, • Employee Support Programs✅ Career Growth Opportunities Develop your electrical and manufacturing skills through hands-on training and advancement opportunities. ✅ Clean, Professional Work Environment Work in a modern manufacturing facility where safety, organization, and teamwork are prioritized. ???? Take the Next Step in Your Career Whether you're an experienced Panel Builder, Electrical Assembler, Wire Technician, or Manufacturing Professional, this is your opportunity to join a company that values skilled trades and invests in its employees. Apply today and discover why talented assemblers are choosing to grow their careers here while earning up to $29/hour. ⚡???????? Job Type & Location This is a Permanent position based out of Rochester, NY. Pay and Benefits The pay range for this position is $25.00 - $29.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Rochester,NY. Application Deadline This position is anticipated to close on Oct 6, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Monroe Tractor is a well-known and respected construction equipment and agricultural equipment dealer with over 75 years of experience servicing the northeastern US. With 18 locations throughout New York, Pennsylvania, Vermont, Connecticut, and Massachusetts, we pride ourselves on providing best-in-class sales and support to over 15,000 hardworking customers. Since our founding in 1951, the industries we serve have been transformed by the technologies, equipment, and capabilities undreamed of decades ago. But the people we serve haven't changed, and neither have we. We're still a family-owned business! The Service Manager position is ideal for someone who thrives on overcoming challenges with creative solutions. You will be responsible for directing the service operations of the Service Department with oversight of technicians to obtain optimum efficiency, economy of operations, and maximum profits. Qualifications • 3 years or more of leadership experience within the equipment or auto service industry is required., • Strong work ethic., • Superior communication skills., • A strong sense of urgency is required., • Customer service experience is required., • Confidence in working with Microsoft Office applications and learning new software programs. Responsibilities • Demonstrate company core values in all interactions with customers, vendors, and associates., • Hire, train, develop, and motivate service department staff., • Ensure all necessary shop equipment is in proper repair and safe working condition., • Front-line customer contact who coordinates repairs and provides updates to the customer throughout the repair process., • Finalize customer work orders and prepare invoices., • All aspects of managing our service business and shop activities., • Prepares customer quotes, closes work orders, and communicates directly with customers., • Consistent interaction with our technicians and will be the direct contact on all service activities., • Maintaining customer relationships while increasing service business and must be able to deliver a high level of professional customer service. Benefits • Medical, Dental & Vision Insurance, • Health Savings Account (Employer + Employee Contributions), • Accident & Disease Insurance, • 401K Plan + Match, • Competitive Paid time off Policy, • Short/Long Term Disability, • Annual Reviews, • Bonus Incentive Plans Monroe Tractor is proud to be an Equal Opportunity Employer and values diversity in the workplace. We encourage candidates from all backgrounds to apply and join a team where your work makes a difference every day. This is our target base range for this position. However, we are always looking for top talent. We scale pay based on the specific skills and background you bring. If your proven track record commands a higher package, we still want to hear from you. Pay Transparency $60,000—$85,000 USD

Job Description Are you driven to grow, lead, and make a meaningful impact? At Apex, we're building more than a consulting and engineering firm—we're creating a place where your career accelerates, your contributions matter, and your potential is fully realized. We believe your growth is our growth, which is why we invest in your development at every stage of your career. Here, you'll work on projects that shape communities, protect the environment, and create lasting impact, all while being empowered with the autonomy and flexibility to do your best work. Fueled by high-quality delivery, exceptional client retention, and strategic acquisitions, Apex Companies continues to rank among the fastest-growing firms in the AEC industry, recently recognized by the Zweig Group for our industry-leading growth. Our success is grounded in strong leadership, a collaborative culture, and a shared commitment to delivering exceptional outcomes. As we continue to expand, we're looking for high-performing professionals who are ready to lead, collaborate, innovate, and create impact. At Apex, you help shape what's next. When we succeed together, we share in that success. All Apex positions are eligible for annual bonus opportunities, reinforcing our commitment to recognizing and rewarding meaningful contributions that drive our collective growth. This role is eligible for a minimum $20,000 sign-on bonus, in accordance with the Company's sign-on bonus program and applicable terms and conditions. Apex is expanding its Infrastructure Practice and seeking a senior leader to build and grow our infrastructure (water, wastewater, stormwater, transportation, civil engineering) business in Upstate New York. This is a strategic growth role for a senior, client-facing professional with a strong municipal network and an active book of business. The successful candidate will lead business development and project delivery for municipal infrastructure projects in their local geography, supported by Apex's national resources and multidisciplinary teams. The role begins as remote with the opportunity to establish and lead a new office in your target market. If you are an entrepreneurial leader with a track record of building markets, winning work, and delivering impactful infrastructure projects, we invite you to join Apex and help shape the next chapter of our Infrastructure growth. Key Responsibilities: Market Growth & Leadership • Lead the growth of Apex's infrastructure services within your designated local market., • Develop and execute a strategic plan to expand relationships with municipal, utility, and public-sector clients., • Leverage existing client relationships and your market insight to establish Apex as a trusted regional partner., • Collaborate with Divisional and Regional Leadership to align local efforts with Apex's broader infrastructure strategy. Client Development & Relationship Management • Serve as a trusted advisor to municipal and utility clients, understanding their infrastructure priorities and funding mechanisms., • Identify and pursue new project opportunities, lead proposal development, and manage interview and negotiation processes., • Drive cross-selling of Apex's complementary environmental, construction, and compliance services., • Represent Apex at professional associations, technical committees, and industry conferences. Project Delivery & Fiscal Oversight • Oversee delivery of municipal infrastructure projects including water and wastewater treatment, distribution/collection systems, stormwater management, transportation or civil engineering., • Ensure technical excellence, quality control, and adherence to scope, schedule, and budget., • Provide technical leadership, mentoring, and QA/QC oversight to project teams., • Manage project performance, including backlog, utilization, and profitability metrics. Team Building & Mentorship • Recruit, mentor, and develop engineers, project managers, and technical staff to grow Apex's local presence., • Foster a collaborative, high-performance culture focused on client satisfaction and technical excellence. What we're looking for: • BS or MS Degree in Civil or Environmental Engineering or relevant engineering discipline, • 15+ years of experience in municipal infrastructure, • Registered Professional Engineer preferred in NY, • Demonstrated success in developing new markets, securing key municipal clients, and achieving financial growth targets, • Strong record of mentoring, team development, and leading cross-discipline project teams, • Demonstrated ability to work effectively with clients in a forward-thinking manner to drive growth and sustained performance through effective leadership, • Excellent written and verbal communication skills, • Desire to manage and mentor all levels of staff #LI-JS1 Why you'll love working for us: • Company-subsidized medical and dental., • Company-paid life, short, and long-term disability., • 401k match, tuition assistance, and more., • Cross-training and the ability to work on a variety of projects., • Performance-based bonuses or other incentives., • Working with the best and brightest in the industry., • 2,000+ employee national firm with 70+ locations across the US. Apex Job Title: Principal Engineer Req ID:12111 Annual Expected Pay Range $195,000—$220,000 USD We believe in equality for all and celebrate the diversity and differences of our employees, customers, and communities. We do not discriminate based on gender, race or color, ethnicity or national origin, age, disability, religion, sexual orientation, gender identity or expression, veteran status, or any other applicable characteristics protected by law. Apex aims to make apexcos.com accessible to all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, please contact Talent@apexcos.com or (301) 417-0200. Likewise, feel free to reach out to us if you would like to view or discuss Apex policy related to equal employment opportunity or have any related concerns. EO/AA/VEV/Disabled Employer TO ALL RECRUITMENT AGENCIES: Apex Companies does not accept unsolicited agency resumes. Please do not forward resumes for any of our job postings to our career's sites, or to any employees of Apex Companies or affiliates. Apex Companies is not responsible for any fees related to unsolicited resumes.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: Customer- Champion of customer advocacy, responsible for transforming the Voice of the Customer into actionable opportunities and driving customer satisfaction through data-driven analysis for prioritization of corrective measures and improvement opportunities. Systems- Responsible for championing the Integrated Business Management System (IBMS), maintain certification to ISO9001, 14001, FSSC and other standards as required, provide training, and writing procedures and processes to support the IBMS development. Lead and undertake audits across all areas of the business as well as across the supply chain. Maintain statistical tools for continuous quality and profit improvement projects. Lead and drive improvement actions from audits, customer complaints, and continuous improvement. Be the change agent for quality related projects. Validation- Apply project management and technical expertise to successfully deliver Validation program goals and outcomes while interacting with customers and meeting their expectations. ESSENTIAL DUTIES AND RESPONSIBILITIES: Customer • Leadership and management of customer complaint program including associated return and credit authorizations, leadership of team to identify root causes, implementing corrective actions to prevent recurrence and mitigate future quality risks, and timely communication back to customers., • Monitoring and reporting of complaint and quality data and trends for area dashboards, operations review, and systems management review., • Execution of formal weekly/monthly/annual Complaint Performance Reviews and reporting of complaint status to management team., • Provide backup for Quality Supervisors and Quality technicians., • Travel as required to work with customer, understand their concerns, and resolve issues., • Drive continuous improvement opportunities utilizing lean six sigma and the seven basic quality tools, to benefit the success of APC, including profit improvement plans, long and short-term strategic objective, helping establish problem solving teams and methods, and recommend capital projects that improve Safety, Productivity, and Quality., • Write and improve manuals, standards, and procedures as needed., • Use of statistical software and techniques for analysis of data including Process Capability (Cpk, Ppk), Statistical Process Control (SPC), and Design of Experiments (DOE), • Other duties as assigned. Systems • Oversee effective implementation of the IBMS including applicable certifications., • Maintain manuals and procedures and determine future procedural needs of the business., • Organize and manage the internal audit system and the corrective action system., • Host external audits, conduct internal audits and assist in training of other auditors., • Collect and analyze quality data and report on Key Performance Indicators (KPIs) to drive improvement., • Project leader for quality and continuous improvement activities and promote the use of improvement tools such as Six-Sigma, Error Proofing, and Measurement System Analysis., • Statical analysis of data using Excel, JMP, Minitab or other statistical software tools., • Recommend Capital projects that improve Safety, Productivity, and Quality within the operation., • Be the next level for complaint resolution with customers beyond the administration of the complaint. Duties would include identifying root cause, implementing corrective actions, and driving projects to proactively mitigate future quality risks., • Other duties as assigned. Validation • Manage the scope, schedule, and reporting of Validation program activities for individual products and/or customers; ensure status, risks, and open issues are tracked and that all stakeholders (Management, internal/external clients, Business Managers/Project Managers, and regulatory agencies) are informed in a timely manner., • Write and execute IQ/OQ/PQ validation protocols and management of associated deviation process., • Management and leadership of change control process, calibration process, and gage R&R process., • Provide hands on support to the manufacturing areas as required to assist in problem solving and long-term changes that provide product/process improvements in relation to process failures. Collect and analyze data to make data driven recommendations/decisions., • Participate in process failure investigations., • Maintain up to date knowledge of validation requirements, practices, and procedures and instruct other members of the site participating in validation studies., • Support risk analysis activities, including design and process FMEA., • Facilitate team meetings as needed on in-depth process and product analysis, risk assessments, decision-making, and other evaluations related to the Validation program., • Assist in internal and 3rd party audits., • Provide backup for Quality Supervisors and Quality technicians., • Drive continuous improvement opportunities utilizing lean six sigma and the seven basic quality tools, to benefit the success of APC, including profit improvement plans, long and short-term strategic objective, helping establish problem solving teams and methods, and recommend capital projects that improve Safety, Productivity, and Quality., • Write and improve manuals, standards, and procedures as needed., • Use of statistical software and techniques for analysis of data including Process Capability (Cpk, Ppk), Statistical Process Control (SPC), and Design of Experiments (DOE), • Other duties as assigned. Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Systems - Bachelor's degree (B. A.) from four-year college or university; and two years related experience and/or training; or equivalent combination of education and experience. ASQ certification is a plus. Customer & Validation - Bachelor's degree in science, mathematics, or engineering from four-year college or university, and two years related experience and/or training; or equivalent combination of education and experience. ASQ certification is a preferred. LANGUAGE SKILLS Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. MATHEMATICAL SKILLS Systems - Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations. Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis. Demonstrated use of Minitab or JMP is a preferred skill. Customer & Validation - Ability to apply advanced mathematical concepts. Ability to utilize descriptive statistics (average, variation, standard deviation) to analyze data and support process control and capability analysis. Ability to create and interpret control charts, histograms, pareto charts, and scatter diagrams. Ability to develop statistically appropriate sampling plans. Ability to use and learn statistical analysis software. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS Systems - The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to talk or hear. The employee is occasionally required to walk. Customer & Validation - The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand, use hands to finger, handle or feel objects, tools or controls. The employee is occasionally required to sit, reach with hands and arms, stand, walk, stoop, kneel, crouch or crawl and climb or balance. The employee is regularly required to hear. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, distance vision, color vision, and the ability to adjust focus. Employee must also be able to taste/smell. WORK ENVIRONMENT Systems- The noise level in the work environment is usually moderate. While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to talk or hear. The employee is occasionally required to walk. Customer & Validation - The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: talentacquisition@americanpackaging.com.

Job DescriptionAbout the Company At Current, everything starts with people. We believe that when you invest in talent through opportunity, development, and support, you unlock growth for individuals, firms, and clients alike. That’s why we’ve built a platform designed to give our people access to more: more learning, more collaboration, and more ways to grow their careers than any single firm could offer on its own. Founded in 2023, Current has rapidly become one of the fastest-growing accounting platforms in the country, partnering with more than 40 leading accounting firms across the United States. Today, our community includes over 2,000 professionals, 30+ offices nationwide, and a growing global workforce that supports clients around the world. Backed by Thrive Capital, Bessemer Venture Partners, and Springdale Industries, Current is investing heavily in technology, artificial intelligence, and workforce innovation to help modernize the profession. Our leadership team has a proven track record of building and scaling successful businesses, with prior ventures generating more than $3 billion in combined enterprise value. We’re building something bigger than a traditional accounting firm: a platform where talented people can grow faster, learn more, and do more meaningful work. Whether you join Current, one of our partner firms, or our global team, you’ll be part of a community shaping the future of the profession. Company Summary: Bowers Accountants & Advisors Powered by CURRENT stands as a renowned figure in the realm of public accounting, distinguished for its provision of top-tier audit, assurance, and advisory services. As a proud member of the AICPA’s G400, we have moved to the Top 200 Firms nationwide, earning the No. 165 ranking inside Public Accounting's (IPA) 2026 IPA 500 list. We maintain a robust reputation grounded in integrity, professionalism, and unparalleled expertise. We proudly boast an extensive array of specialties and maintain a strategic presence with offices located in Syracuse, Rochester, Ithaca, and Watertown. Committed to delivering innovative solutions, we empower our clients to navigate intricate financial landscapes and attain their distinct financial objectives while serving private and closely held businesses with strategic advice for over 40 years. Whether traditional Tax and Audit, Client Accounting Advisory Services, Business Valuation, Accounting/Bookkeeping, Forensic Accounting, or Financial Planning Services, our approach is to master an in-depth knowledge of our clients with innovative analysis and recommendations to build and maintain net growth. Job Summary: Examine, analyze, and interpret accounting records to prepare financial statements, give advice, or audit and evaluate statements prepared by others. Install or advise on systems of recording costs or other financial and budgetary data. This position has a career path to Partner. Requirements: Lead and manage multiple existing audit engagements for a diverse client portfolio, including planning, executing, and completing audits in accordance with established audit procedures. Perform risk assessments and develop comprehensive audit plans that address key areas of risk and control within client organizations. Oversee the execution of audit procedures, including evaluating internal controls, testing transactions, analyzing financial statements, and verifying the accuracy of records. Review and analyze audit findings, identifying areas of improvement, and providing recommendations to clients for enhancing operational efficiency and compliance. Ensure compliance with applicable regulations, accounting standards, and professional best practices throughout the audit process. Develop and maintain strong client relationships, acting as a trusted advisor and providing proactive guidance on financial and business-related matters. Supervise, train, and mentor audit staff, fostering a collaborative and supportive work environment while promoting professional growth and development. Stay updated on industry trends, regulatory changes, and emerging audit practices, and effectively communicate relevant information to clients and team members. Demonstrate a commitment to professional ethics and integrity, upholding the reputation of the firm and maintaining confidentiality of client information. Qualifications: A minimum of 5- 10 years of experience in a public accounting firm. A bachelor's or advanced degree in business or accounting CPA requirement Proven track record of managing and leading a team of professionals preferred Exceptional client service skills with the ability to build and maintain long-term client relationships. Excellent communication and presentation skills, with the ability to effectively convey complex financial accounting and audit concepts to both technical and non-technical stakeholders.. Strong analytical and problem-solving skills. Ability to work collaboratively in a team environment and thrive in a fast-paced environment Ambition and a desire to advance to a partnership position within our firm. Salary: $100K-$155K with Partner Track Potential Compensation & Benefits The total rewards package at Current includes base salary and benefits. Our salary ranges are competitive within the accounting industry and are updated regularly using the most reliable compensation survey data for our industry. New hire offers are made based on a candidate’s experience, expertise, geographic location, and internal pay equity relative to peers. We provide a robust benefits package, including: Health, Dental, and Vision Insurance (with options for fully paid employee only coverage for health and dental) Company-Paid Life and Long-Term & Short-Term Disability Insurance Ancillary Benefits such as supplemental life insurance, critical illness, and accident insurance Classic Safe Harbor 401(k) Plan with employer contributions Opportunities for professional growth, learning, and development including access to Becker and LinkedIn Learning Equal Opportunity We are an equal opportunity employer, and we do not discriminate on the basis of race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability, genetic information, or any other applicable legally protected characteristic. Compensation Range: $80K - $120K

Job DescriptionSales Development Representative About Tom James Join a forward-thinking company dedicated to your growth and success. We believe that our greatest asset is our people. By being 100% invested in you, we create a supportive environment where you can thrive and capture your full potential. Key Benefits: 100% Investment in Your Growth: We prioritize your development and success. From our robust sales training program to mentorship opportunities, we provide the resources and support you need to excel in your role and achieve your career goals. Your success is our success! Control Your Income: Enjoy the freedom to shape your financial future. With our unique compensation structure, you can determine your income based on your efforts and achievements through earning hourly and commission bonuses. Unlimited Opportunities: Your potential is only limited by your ambition. Uncapped commissions, lavish incentive trips, and career advancement are some of the ways. Build a Success Mentality: We will identify your individual selling style and build a formal coaching program that strategically maximizes your talents. As you transition into leadership roles, a whole new level of coaching is made available so you can learn from other successful leaders. The Role The Sales Development Representative (SDR) role is a full-time, in-person opportunity. Our SDRs play a critical role in expanding our company by generating new leads through phone calling and prospecting methods. We seek driven, hardworking individuals who want a higher-level professional opportunity in a sales environment. Individuals in this program will develop skills and success mindsets preparing them for a long-term career at Tom James. Those who demonstrate work ethic, coachability, aptitude for sales and a desire to succeed have the opportunity to be promoted to an Outside Sales Professional. careers.tomjames.com SDR Responsibilities • Prospecting for potential new clients utilizing platforms (ZoomInfo, LinkedIn Sales Navigator, and others), • Generates appointments through outbound calls to prospects and existing customers, • Continually build a pipeline of high-quality opportunities, • Works in the field with sales leader 2 times per week, • Ensures all necessary client details are made for your sales leader's client visits each day, • Manages professional social media channels, • Clientele Management Processes with manufacturing facilities, • Maintains a professional image SDR Qualifications, • Desire to be in a sales career, • Ability to manage and complete tasks independently without the need for constant supervision., • Strong communication and organizational skills, • Ability to receive feedback and implement our proven business development practices, • Exceptional customer service skills, • Proficient in various technologies, including Google Drive products and Microsoft Outlook, • Excels in fast-paced team environments, • Capable of bending and lifting up to 20 lbs, • Valid driver’s license required, with exceptions for certain markets (New York City, Chicago, Toronto, or London), • Experience in a sales-oriented environment is a plus! Who Are We? Tom James Company is the world's largest retailer and manufacturer of custom clothing. We have almost 60 years of direct selling expertise in the custom clothing industry. We have grown from a single store, to stores throughout 4 continents and more than $500 million in sales. We are vertically integrated which allows us to have complete control over the quality of the garment’s we are providing to our clients. Our sales force consists of highly motivated, service- and sales-minded professionals that strive for growth and leadership. By finding and developing long-term, loyal clients, our people build lifestyles to support their personal and professional goals. Our clients are highly successful, busy professionals who desire convenience, quality and excellent service—which we deliver to them. Join Us! If you're ready to take control of your career, maximize your potential, and be part of a team that supports your ambitions, apply now! We can’t wait to embark on this journey with you! We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description See your work in a new light. At LUX Infusion, we're reimagining infusion care to be more human, supportive, and connected. Inspired by lux—meaning light - we guide patients, providers, and partners through complex therapies with clarity, compassion, and confidence. As a clinician-led, U.S.-based organization, we put people first - helping patients feel seen and supported through faster therapy starts, dedicated care coordination, and meaningful collaboration. Our commitment to inclusion, diversity, equity, and advancement (IDEA) is central to our culture, ensuring every team member feels valued and empowered to make a difference. Schedule: Monday–Friday, 8:30 AM–5:00 PM EST Location: On‑site — Rochester, NY (Work location subject to change based on business needs) See Your Work in a New Light At LUX Infusion, we believe infusion care deserves more light — more warmth, more clarity, and more connection. Behind every successful patient experience is a pharmacy operation built on accuracy, teamwork, and accountability. We're looking for a Pharmacy Technician who wants their work to mean something — someone who brings care, precision, and reliability to every step of medication preparation and fulfillment. Why This Role Matters The Pharmacy Technician plays a critical behind‑the‑scenes role in patient care. By ensuring medications are prepared, labeled, packaged, and delivered accurately, this role helps ensure patients receive the right therapy at the right time — safely and compliantly. In this role, you'll contribute to work that: • Supports safe, timely delivery of infusion medications, • Enables pharmacists and clinicians to focus on patient care, • Maintains quality, compliance, and consistency in pharmacy operations, • Strengthens a patient‑first, clinician‑led organization While patients may never see this work directly, they feel its impact every day. What You'll Do In this role, you will: • Perform pharmacy technical and clerical duties under the direct supervision of a licensed Pharmacist, • Prepare, label, package, and stage prescriptions including sterile admixtures, unit‑dose, and prepackaged medications, • Generate and process batches for prescription preparation and shipment, • Enter and maintain accurate prescription, inventory, and shipment data in pharmacy systems, • Generate labels, pick lists, and packages in accordance with dispensing orders, • Coordinate with intake and billing teams to ensure insurance authorization prior to shipment, • Communicate shipment details with field staff and managers to ensure accurate delivery, • Receive, unpack, verify, and document incoming drug and supply deliveries, • Monitor outbound shipments to confirm delivery and file documentation accurately, • Perform and document quality assurance activities, • Maintain clean, organized, and compliant pharmacy workspaces, • Manage inventory levels, rotation, and returns in alignment with company goals, • Participate in training, quality meetings, and continuing education to maintain regulatory and clinical knowledgeWhat We're Looking For You may be a great fit if you bring: • Strong attention to detail and commitment to accuracy, • A customer‑service mindset applied to pharmacy operations, • Comfort working in structured, regulated environments, • Reliability, organization, and pride in doing things the right way, • A collaborative approach to supporting pharmacists and operations teams Required Qualifications • High school diploma or GED, • Minimum of two (2) years of experience in retail, hospital, or specialty pharmacy, • Basic computer proficiency, including Microsoft Office, • Strong communication and interpersonal skills, • Commitment to HIPAA compliance and patient confidentiality Preferred Qualifications • Graduation from a pharmacy technician training program, • National Pharmacy Technician Certification (PTCB), • Experience with CareTend or similar pharmacy software You don't need to check every box; we care just as much about how you show up as your experience. Candidates who do not currently hold the required pharmacy technician credentials may still be considered. LUX Infusion is willing to provide training and developmental support to a qualified candidate who demonstrates the aptitude and commitment to complete the credentialing process. The selected candidate must obtain an approved national pharmacy technician certification and satisfy all New York State licensure and registration requirements within six months of hire, or within another timeframe established in the offer letter. Until the required credentials are obtained, the employee's responsibilities will be limited to duties legally permitted for unlicensed personnel and performed under pharmacist supervision. Continued employment in the Pharmacy Technician position is contingent upon timely completion and maintenance of all required credentials. Why LUX Infusion At LUX Infusion, we believe care deserves more light — more warmth, more clarity, and more connection. Here, you'll find: • Purpose‑driven work that directly supports patient outcomes, • A patient‑first, clinician‑led culture, • Supportive pharmacy teams and clear operational standards, • Opportunities for professional growth and continuing education, • A collaborative environment where accuracy and care go hand in hand Come help ensure every prescription is prepared with precision and purpose — and see what's possible when care comes first. Sign on bonus $2000 Pay Range/Rate $23.50—$30 USD PHYSICAL DEMANDS The physical demands described here represent those required for an employee to successfully perform the essential functions of this role. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions. If you require a reasonable accommodation during the application or interview process, please contact the LUX Infusion Talent Team at Careers@LUXInfusion.com or 954.385.7322 x 1425. While performing the duties of this position, the employee may occasionally be required to stand, walk, or sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee may also be required to occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this role include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. OTHER REQUIREMENTS Employees are expected to: • Participate annually in required legal and ethical compliance training, • Consistently act in compliance with LUX Infusion's legal, ethical, and compliance policies, • Adhere to all standards and procedures outlined in the LUX Infusion Compliance Manual, • Refrain from any behavior that could be considered unethical or unlawfulEXPECTATIONS FOR ALL EMPLOYEES All LUX Infusion team members are expected to support the organization's mission, vision, and values by demonstrating integrity, dedication, compassion, and enthusiasm. This includes placing patients first, working collaboratively with a "stacked‑hands" mindset, and maintaining a consistent focus on quality, accountability, and continuous improvement. GENERAL INFORMATION The statements above are intended to describe the general nature and level of work performed by individuals in this role. They are not intended to be an exhaustive list of all responsibilities, duties, or skills required. This role operates in a fast‑paced environment and requires the ability to prioritize competing demands, manage multiple tasks effectively, and seek guidance when appropriate. Employees in this position may be required to assist directly - or coordinate appropriate assistance - to ensure access to LUX Infusion's services for individuals with disabilities, including patients, visitors, employees, or others. LUX Infusion is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.

Job Description Job Summary: The Coating Technician 1 is responsible for the safe and efficient operation of the coating equipment within the Coating Department. This role involves executing production-grade coating processes and adhering to quality work instructions. The technician will focus on maintaining productivity in the department, overseeing general maintenance, and managing supplies inventory. Collaboration with the Coating Manager and Assemblies Department is essential to ensure timely delivery of high-quality coated parts. Essential Duties and Responsibilities: • Champion of excellence in optical coating production., • Maintains established process parameters to ensure that quality parts are being produced., • Assists Coating Manager is maintaining production supplies inventory., • Ensures timely delivery of quality coated items., • Completes preventative maintenance procedures and cleaning processes, making sure these activities occur on schedule or as needed., • Capable of performing general maintenance in coating; full chamber cleanings, cryo-pump regeneration, emitter rebuilding and general shop upkeep., • Trains and guides other staff members on proper operation of coating equipment, execution of coating procedures and document control., • Identifies quality issues and reports to Coating Manager and/or Quality department, as needed., • Identifies potential safety issues and reports to management. Additional Responsibilities: • Raises individual performance to a level that results in proactive responses to problem solving and continuous improvement., • Works well in a team environment., • Maintains a clean and orderly work environment., • Performs other related duties and assignments as required, depending on candidate skill set and on an as-needed basis to support evolving business needs.Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 40 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists The noise level in the work environment may range from moderate. Education, Skills and Experience: • Minimum 2 years experience in optical coating equipment operation., • Basic analytical skills, including basic statistical analysis., • Basic computer skills, including Microsoft Office and Windows operating systems., • Good oral and written communication skills., • Strong time management skills., • Work independently with minimal supervision.

Job DescriptionDescription: Job Objective: Provide leadership, accountability, and daily management of the Office of Student Financial Services. Create and maintain an attitude of quality customer service to students, families, and partners. Maintain regulatory compliance and protect the integrity of the financial aid services of the University. Job Responsibilities: Operational Oversight: • Oversee full-service financial aid processing, including document collection, budgeting, awarding, FAFSA verification, and loan certification for college related programs., • Monitor student Satisfactory Academic Progress for all students., • Review financial aid eligibility for students and allocate funds to students accordingly., • Provide leadership and direction around processes related to the disbursement of funds., • Demonstrate attitude of quality customer service to students and families., • Maintain current knowledge of federal and institutional policies and procedures regulating student aid., • Present material related to financial aid and/or internal policies and procedures to various audiences., • Manage processes to allow for efficient and accurate processing of financial aid., • Complete annual, quarterly, and monthly audits and reconciliations., • Maintain compliance with all regulations Policy and Planning Participation: • Oversee the development and implementation of policies and procedures which ensure the successes of all functions of the financial aid awarding process including:, • Preparing and delivering financial aid awards to students in an effective manner., • All aspects of financial aid processing including document collection, budgeting, awarding,, • FAFSA verification, and loan certification., • Counseling to students and families through each step of the financial aid process., • Develop a communication plan for students and families through each step of the financial aid and students finance model., • Manage staff to provide insight and leadership, regarding various functions including (but not limited to): compliance review, communications, systems review, and budget discussions., • Develop strategies for new and returning students which promote sound financial planning for the purpose of successfully financing the academic goals of each student., • Provide data for key performing indicators. Collaboration: • Coordinate financial aid functions with appropriate offices and recruitment vendor(s), as it relates to financial aid., • Coordinate communication with admissions offices and other student services offices, and those involved in academic advising to ensure they have accurate information and contacts to help students make solid financial decisions. Team Management and Supervision: • Hire, train, and supervise Student Financial Services staff in the essentials of customer service, student outreach, student financial planning, and the necessary elements of federal and state financial aid compliance., • Provide leadership, training, and accountability for financial aid staff as they work with prospective students with application to graduation., • Implement and document regular and consistent quality control functions to measure accuracy and quality of Title IV awarding as well as institutional controls., • Provide technical training and guidance.The approved salary for this position is: $70.000.00 - $80,000.00/annuallyRequirements: Qualifications • 5 years comparable work experience, • Previous accounting or customer service background is required., • Financial Aid system experience., • Attention to detail, • Familiarity with accounting procedures, • Strong project management skills, • Ability to manage multiple tasks simultaneously., • Ability to project a positive image of the College to all constituents, • Bachelor’s degree in Business Administration or Public Administration, • Excellent communication skills, • Excellent interpersonal skills, • Excellent teamwork skills

Job DescriptionAssociate Director of Talent Acquisition Rochester, NY $65,000- $68,000 This position offers a flexible hybrid schedule, with the possibility of working 2–3 days in the office and 2–3 days remotely from home. Why Starbridge At Starbridge, we partner with people with disabilities, their families, and the people who support them to build communities where everyone belongs. We are For the Hope and the How: the hope that life can change for the better, and the know-how to make it happen. If you’re passionate about people, building strong teams, and creating meaningful connections, we’d love to hear from you! At Starbridge, you’ll have the opportunity to bring your creativity and enthusiasm to work that makes a difference, while growing your skills and advancing your career. We’re seeking an Associate Director of Talent Acquisition to join our Organizational and Workforce Development team and help us attract and build a talented, mission-driven workforce. What You'll Do • Lead recruitment strategy and high-volume hiring efforts to meet Starbridge's workforce needs., • Oversee the hiring process from requisition through offer, ensuring consistent, accessible, and compliant practices., • Create a positive candidate experience through timely communication and a smooth transition from selection through onboarding., • Partner with hiring managers and Human Resources teams to strengthen hiring practices, remove barriers, and support workforce needs., • Lead, coach, and develop the Talent Acquisition and onboarding team., • Monitor recruitment data and trends to identify opportunities and improve hiring outcomes., • Ensure recruitment and onboarding practices are accurate, compliant, and audit ready.What You'll Bring, • Bachelor’s degree in human resources, business, human services, or a related field required; commensurate experience considered., • 3+ years of high-volume recruitment experience, preferably in nonprofit, human services, healthcare, or another mission-driven organization., • 2+ years of supervisory or team leadership experience., • Experience recruiting Direct Support Professionals or other high-volume frontline positions., • Strong knowledge of effective and lawful interviewing and hiring practices, with knowledge of applicable federal and New York State requirements., • Experience with applicant tracking systems; JazzHR and ADP preferred. SHRM-CP, PHR, or similar certification preferred., • Strong communication, organizational, analytical, and relationship-building skills, with a commitment to accessible, equitable, and inclusive hiring practices. Why You'll Love Working Here • Generous paid time off that grows with your years of service., • Employer-paid life insurance worth two times your salary., • Health, dental, and vision coverage, with Starbridge helping cover the cost., • A retirement plan you can start right away, with a 4% Starbridge match after one year., • Opportunities to lead meaningful initiatives that strengthen families and communities across New York State., • A collaborative leadership team committed to innovation, inclusion, and continuous improvement. Our Commitment Removing barriers is at the heart of our mission, and that includes how we hire. Starbridge is proud to serve a variety of cultures and backgrounds. We are an equal opportunity employer and do not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. We welcome applicants of every background and experience and base our hiring decisions on each person’s ability to do the job. Powered by JazzHR wGbFA1nsKN

Job Description Job Title: Quality Technician Job Description Join our team as a Quality Technician where you will play a pivotal role in ensuring the highest standards of product quality and verification. You will work with advanced measurement systems and contribute to mission-critical projects in a dynamic environment. Responsibilities • Conduct quality inspections and product verifications using CMM and Keyence measurement systems., • Perform First Article Inspection (AS9102) and provide support for PPAP., • Manage statistical process control (SPC), AQL, and non-conformance documentation., • Read and interpret blueprints and precision measurement tools., • Collaborate with various departments to ensure quality standards are met. Essential Skills • Minimum of 3-4 years of Quality Inspection/Technician experience within a machine shop environment., • Proficiency in using calipers, micrometers, CMM, Zeiss-Calypso, and GD&T., • Experience with precision parts made by CNC machines., • Ability to read and understand product drawings including GD&T requirements. Additional Skills & Qualifications • Associate degree in a technical field or equivalent technical work experience., • 2-5 years of experience in a manufacturing environment, including machining and assembly., • Knowledge of Microsoft Office (Word, Excel, PowerPoint)., • Experience with sophisticated quality inspection equipment such as Coordinate Measurement Machines, laser scanners, and more., • Experience in a regulated industry with certification to AS9100 or ISO9000., • Excellent communication skills and ability to work with all levels of personnel. Why Work Here? Enjoy a clean and laid-back work environment with opportunities for cross-training and career advancement. Be part of a team working on mission-critical projects in a supportive and collaborative atmosphere. Work Environment The position offers a split shift from Monday to Thursday, 9:30 am to 7:30 pm, with an alternative first shift available. Work in a climate-controlled facility with air conditioning, and be prepared for occasional exposure to industrial oils, loud noise, and other environmental factors. Safety precautions, including ear protection, are provided. Physical requirements include frequent standing, walking, bending, kneeling, and the ability to lift up to 75 lbs. Job Type & Location This is a Permanent position based out of Rochester, NY. Pay and Benefits The pay range for this position is $49920.00 - $58240.00/yr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. 401k, Health, Vision Dental Workplace Type This is a fully onsite position in Rochester,NY. Application Deadline This position is anticipated to close on Oct 6, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Department: Clinic Position Type: Full-Time FLSA: Exempt Job Summary: Join us and be a part of Trillium—a mission driven team committed to expanding access to high quality, compassionate care for everyone we serve. The Board Certified or Board Eligible GYN Physician provides patients with primary care services in a licensed diagnostic and treatment center. Duties/Responsibilities: Patient Care • Provide gynecologic care to patients in an outpatient clinic setting., • Deliver care using an interdisciplinary approach., • Provide services to diverse patient populations, including patients with HIV, Hepatitis C, and LGBTQ+ individuals., • Participate in a rotating 24-hour on-call schedule for urgent patient needs., • Respond to hospital admissions, emergency department visits, critical laboratory results, and urgent patient communications., • Provide consultations regarding gynecologic care as requested., • Perform patient assessments, examinations, and diagnostic evaluations., • Develop and implement treatment plans., • Prescribe medications and other appropriate therapies., • Interpret laboratory and diagnostic test results., • Educate patients regarding diagnoses, procedures, treatment plans, and preventive care., • Monitor patient progress and adjust treatment plans as necessary., • Refer patients to specialists and community resources when appropriate., • Collaborate with nurses, medical assistants, specialists, and other healthcare professionals to coordinate care., • Complete and maintain accurate patient documentation and medical records., • Prepare required regulatory and organizational reports. Teaching/Training • Precept medical students, residents, and other healthcare learners during clinical rotations., • Provide clinical guidance and mentorship to trainees., • Support educational initiatives that promote quality patient care., • Maintain professional licensure and credentialing requirements., • Complete an average of 50 or more Continuing Medical Education (CME) credits annually. Administrative Responsibilities • Participate in quality improvement and quality assurance activities., • Support organizational initiatives and compliance requirements., • Attend required meetings and committees., • Assist with policy implementation and operational improvements., • Perform additional administrative duties as assigned. Miscellaneous: • Requires the ability and commitment to respect and support inclusiveness and diversity, including but not limited to individuals of different backgrounds, cultures, races, ages, sexual orientations, gender identities or expressions, experiences, and opinions., • Demonstrates a commitment to One Trillium behaviors and business impacts and serves as a role model for these behaviors throughout the organization., • Maintains confidentiality of all patient, client, employee, protected, and proprietary information., • Meets departmental performance standards and expectations., • Participates in compliance audits, process improvement initiatives, and quality improvement plans as requested., • Performs other duties as assigned. Required Skills/Abilities: • Excellent verbal and written English Communication skills required. Education and Experience: • MD or DO Degree and Board Certified or Board Eligible in Obstetrics and Gynecology., • Minimum 3 years of clinical experience in gynecology preferred. Physical Requirements: While performing the duties of this job the employee is required to stand, sit, walk, use hands to finger, handle, or feel; reach with hands and arms, talk and hear. Occasionally the employee must stoop, bend and lift or move up to 25 lbs. Specific vision abilities required include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. In support of the Americans with Disabilities Act, this job description lists only those responsibilities and qualifications deemed essential to the position. Equal Employment Opportunity: Trillium Health promotes Equal Employment Opportunity for all, respecting diverse backgrounds, cultures, races, ages, experiences, and opinions. Employees must meet department performance standards and participate in compliance audits, process improvement, and quality improvement plans.

Job Description Department: Clinic Position Type: Full-Time FLSA: Exempt Job Summary: Join us and be a part of Trillium—a mission driven team committed to expanding access to high quality, compassionate care for everyone we serve. Trillium Health is seeking a dedicated and skilled Staff Physician specializing in Infectious Diseases to join our interdisciplinary healthcare team. The successful candidate will provide high-quality patient care in our licensed diagnostic and treatment center under the direction of the Chief Medical Officer. Duties/Responsibilities: Patient Care • Provide Infectious Disease Consultation to adult patients on-site in clinic with an interdisciplinary approach., • Participate in a rotating weekly phone-based call system to handle urgent patient communications, ED visits, hospital admissions, panic lab values, etc. Teaching/Training • Precept students, residents, and other medical staff during elective rotations at Trillium Health., • Obtain 100 or more CME credits every two years to remain eligible for medical staff credentialing and commercial insurance credentialing. Administrative Responsibilities • Complete all clinical documentation within 3 business days of medical treatment., • Conduct Ongoing Peer Reviews on a quarterly basis and Focused Peer Reviews as assigned., • Perform duties related to quality assurance and other administrative tasks as required. Miscellaneous: • Demonstrate commitment to inclusiveness and diversity, respecting individuals of different backgrounds, cultures, races, ages, sexual orientations, gender identities or expressions, experiences, opinions, etc., • Model One Trillium behaviors, values, and business impacts within the organization., • Maintain confidentiality of all patients, client, employee, protected, and proprietary information., • Meet department performance standards and participate in compliance audits, process improvement, and quality improvement plans., • Perform other duties as assigned. Required Skills/Abilities: • Excellent verbal and written English communication skills required. Education and Experience: • Preferred: M.D. or D.O. Degree and Board Certified or Eligible in Internal Medicine, with a Fellowship in Infectious Disease. Or HIV specialist physicians as credentialed by the American Academy of HIV Medicine. Physical Requirements: While performing the duties of this job the employee is required to stand, sit, walk, use hands to finger, handle, or feel; reach with hands and arms, talk and hear. Occasionally the employee must stoop, bend and lift or move up to 25 lbs. Specific vision abilities required include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. In support of the Americans with Disabilities Act, this job description lists only those responsibilities and qualifications deemed essential to the position. Equal Employment Opportunity: Trillium Health promotes Equal Employment Opportunity for all, respecting diverse backgrounds, cultures, races, ages, experiences, and opinions. Employees must meet department performance standards and participate in compliance audits, process improvement, and quality improvement plans.