Trabajos Construction & Trades en Wilmington, North Carolina - Page 5Crear alertas

Job Description JOB LOCATION: Wilmington, NC AVAILABLE POSITIONS: 1 PRIMARY FUNCTION: Perform general tasks involving physical labor as well as operating the loader and Bobcat at pits and/or plants. May operate hand and power tools of all types: Air hammers, small mechanical hoists, and a variety of other equipment and instruments. May clean and prepare sites, dig trenches, set braces for support, cleaning up rubble and debris and keeping plant yard clean at all times. ESSENTIAL DUTIES: Loader Operator • Operate loader as needed for moving and loading materials at pits or on plant yard. May also be required to use jackhammers, drills and other power tools., • Position, join, align, and seal structural components., • Shovel materials., • Signal equipment operators to facilitate alignment, movement, and adjustment of machinery, equipment, and materials., • Spray materials such as water, sand, steam, or paint through hoses to clean, coat, or seal surfaces., • Tend all machines used in the day to day operations., • Tend pumps, compressors, and generators to provide power for tools, machinery, and equipment, or to heat and move materials., • Lubricate, clean, and repair machinery, equipment, and tools., • Apply caulking compounds by hand or using caulking guns., • Clean and prepare sites to eliminate possible hazards., • Control traffic passing near, in, and around work area., • Erect and disassemble scaffolding, shoring, braces, ramps, and other temporary structures., • Load, unload building materials, machinery, and tools., • Mix ingredients to create compounds for covering or cleaning surfaces., • Learn and follow safety regulations., • Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year., • Perform additional duties as required or directed by their immediate supervisor or other manager., • Must have regular and predictable attendance. MINIMUM REQUIREMENTS: Education: • Good work ethic., • 1 year experience operating loader required., • Candidate will need to have dependable transportation., • Punctual, dependable and self motivated., • Willing to work overtime and weekends. Heavy physical effort required including pulling and lifting or moving heavy weight material with frequent lifting or moving materials or equipment (over 80 pounds). If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required. Physical Activity: Position requires the ability to continuously work around any or all of the following: noise, dust, heat, cold, oil and heavy equipment. Personal protective equipment is normally required of the position. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions. The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time. EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.

Job Description Mavis Tires & Brakes at Discount Prices - Automotive Mechanics Put your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for full-time Automotive Mechanics to join Team Mavis at one of our state-of-the-art automotive service, repair, and tire sales centers in the Leland, NC area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. About the Position of Automotive Mechanic As Mavis's leaders in undercar repairs, our Automotive Mechanics are trusted to inspect, diagnose, and perform a wide variety of automotive services on customers' vehicles. Mavis's Automotive Mechanics perform a wide variety of undercar repairs, including brakes, struts, and shocks. Automotive Mechanics are also responsible for completing state-mandated inspections, changing oil and filters, checking fluids, replacing worn parts, and dismounting, mounting, rotating, and balancing tires. Employee Benefits At Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement. Qualifications We recruit team members who share our commitment to providing complete customer satisfaction and delivering the highest quality service. To be eligible for the position of Automotive Mechanic, you must (1) be at least 18 years of age; (2) be legally authorized to work in the United States; (3) possess 2 years of experience and/or training in automotive repair and maintenance or any combination of education, training and experience which demonstrates the ability to perform the duties and responsibilities of the position; and (4) possess an extensive tool box of personal tools used in performing undercar repairs. The following additional qualifications are preferred: (1) state inspection license(s); and (2) ASE Certifications in Automotive Maintenance and Light Repair (G1), Suspension and Steering (A4), and Brakes (A5). As an active position, Automotive mechanics are required to stand, walk, bend, kneel, stoop, crouch, crawl, climb, pull, reach and perform repeated and repetitive movements consistent with vehicle maintenance and automotive repair. Mechanics must regularly lift and/or move items weighing over 50 pounds. What are you waiting for? APPLY NOW! Candidates can apply online at . OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995. For more information about Mavis, please visit . Mavis is an Equal Opportunity Employer Consistent with our commitment to the principle of equal employment opportunity for all individuals, we enforce a zero-tolerance policy on discrimination at Mavis. Employment decisions are made without regard to an applicant's or employee's actual or perceived race, color, religion, creed, sex, pregnancy, sexual orientation, national origin, age, ancestry, ethnicity, disability, citizenship, alienage, marital status, domestic or civil union partnership status, familial status, caregiver status, military or veteran status, transgender status, gender identity or expression, genetic information, predisposing genetic characteristic, status as a victim of domestic violence, stalking and sex offenses, or any other status protected by applicable federal, state or local laws, regulations or ordinances. Exceptions or modifications to certain job duties and/or expected schedules may be provided for an employee who needs a reasonable accommodation for: (a) a sincerely held religious belief, observance or practice that conflicts with the expected schedule for a position; or (b) an otherwise qualified individual with a disability, unless such accommodation poses an undue hardship on our business, in accordance with applicable federal, state and local laws. Additional information is available by contacting . We will endeavor to make a reasonable accommodation / modification to the known physical or mental limitations of a qualified applicant with a disability to assist in the hiring process, unless the accommodation would impose an undue hardship on the operations of our business, in accordance with applicable federal, state and local laws. If you believe you require such assistance to complete this Application for Employment or to participate in the interview process, please contact our Employee Experience team at (914) 984-2500 ext. 5631. We also will endeavor to provide reasonable accommodation for a job applicant's or an employee's sincerely held religious beliefs, observances, or practices that conflict with a work requirement unless the accommodation poses an undue hardship to our business, in accordance with applicable federal, state and local laws. If you believe you require such an accommodation, please contact our Employee Experience team at (914) 984-2500 ext. 5631. In addition, applicants may report any instances of perceived discrimination through HRConnect either by calling toll-free at 1-877-628-4755 or by sending an email to . Job Posted by ApplicantPro

Job Description Responsibilities Are you an Experienced Mobile Diesel Technician looking for an opportunity to work for a leader in the commercial truck industry? We are searching for tenured & certified technicians to support our customers! Our Mobile Diesel Technicians are responsible for maintaining the fleet for clients and to handle service calls at client locations, so we can provide expedited expertise directly to our customer's trucks & equipment on site. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Maintain all aspects of equipment according to company standards., • Handle basic maintenance of the truck including filling tank with fuel, checking oil, keeping it clean, and making sure required inspections are performed and documented as assigned., • Manage inventory control on the service truck and for keeping the vehicle properly stocked., • Report to the Service Manager and will be assigned duties on a daily basis., • Maintain availability for after-hours service calls and be available for an open work schedule., • Maintain and inventory the supplied tools for the work required in maintaining diesel engine trucks and associated equipment, • Read job order and observes and listens to vehicle in operation to determine malfunction and to plan work procedures., • Utilize various diagnostic equipment to determine malfunction and utilize available technical information to determine and perform correct repair procedure., • Diagnosis, removal and replacement of injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, changes or recharges batteries, and replaces transmissions and other parts., • Perform all necessary diagnostic and documentation functions on the company computer system., • Examine protective guards, loose bolts, and specified safety devices on trucks, and makes adjustments., • Lubricate moving parts and drives repaired vehicle to verify conformance to specifications., • Perform preventative maintenance work as requested., • Document and submit necessary paperwork or enter into mobile service program as work performed in an accurate and timely manner., • Respond to customer inquiries regarding the work. Foster positive customer relations., • Advise customer and/or service writer of any repairs or services which should be performed within the next 3 months., • Participate in training and utilize that training in the course of work. Benefits: * We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED)., • 5 years' experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Current CDL preferred but not required., • Medical card as required by the FMVS., • Mechanical aptitude and technical ability is a must., • Peterbilt, International, Ford, Hino, Isuzu, Cummins, & ASE certifications are preferred & rewarded Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Great career opportunity for a motivated Residential Maintenance Technician for our property North Chase Apartments located in Wilmington, NC. Driver's license and reliable transportation required. Must have property maintenance experience, HVAC experience preferred. Rate of pay based on experience level. Pay range: $19-23/hr For full-time employees, we offer: -2 weeks paid maternity leave, sick pay, holiday pay, and bereavement leave -Paid time off that accrues after 3 months of employment, increasing yearly up to 224 hours of PTO -Tenure incentives and education reimbursements -Employer covers cost of individual medical, dental, and vision insurance coverage -Free basic life insurance -Employer offers medical, dental, vision, basic life, voluntary life AD/D, short term disability, Legal and ID Shield coverages -401k matching up to 6% Essential Job Functions -Arrive daily, attend morning meeting, then begin picking up grounds, and communicate with PM. -Receive assigned work orders and begin with work orders that carry the highest importance. -Return signed completed work orders into office with notes of time and supplies used. -Inform supervisor of any supplies needed and confirm invoices received. -Walk vacant units and create punch lists of work needed. -Work on turn units, coordinate all your efforts around any vendors that may be called in. -Perform extermination work as needed. -Comply with fair housing laws. -Maintain property level safety by checking fire escape routes for obstructions and all fire safety equipment, keep records of safety checks and yearly preventative maintenance. -Passes out notices and delivers correspondence as needed. -Participates in on-call for emergencies. -Complies with standard safety programs and procedures and updates MSDS book as needed. -Organize shop and perform other duties as needed. -Handles all property maintenance needs including but not limited to carpentry, painting, electrical, plumbing, HVAC, sheet rock, floor repair, cabinet and counter repairs. -Perform other duties as assigned. Education/Experience High school diploma or GED, or one to two years related experience and/ or training or equivalent combination of education and experience. Certificates and Licenses HVAC Certificate, Universal Chlorofluorocarbon Certificate, Pool and Spa Operator Certificate may be required. Math, Reasoning and Language Ability Must be able to read a ruler and have a understanding of measurement concepts and perform basic math equations. It is necessary to be able to define problems, troubleshoot issues to form a solution. Should be able to read and interpret documents such as safety rules, procedure manuals, operating and maintenance instructions. Must be able to write routine reports, speak effectively and professionally to coworkers, vendors and residents. Physical Demands Must be able to bend, kneel, walk on a variety surfaces and terrain, able to climb stairs, frequently lift 10-25 lbs, occasionally lift up to 100 lbs, and work in the outdoor elements when troubleshooting or traveling to different locations.

Job Description Entry-Level Construction Materials Professional Requisition Number: 2026-1060-01A S&ME is looking for a motivated and passionate Entry-Level Construction Materials Professional to join our Construction Services team in Wilmington, North Carolina. Are you ready to grow your career with a firm that is committed to its employees and delivers high-quality service to its clients? Join us at S&ME! As an Entry-Level Construction Materials Professional, you will work directly on active construction sites, performing hands‑on testing and inspections of materials used in the field. This role is ideal for someone who enjoys hands-on work, being outdoors, and playing a critical role in keeping construction projects safe, compliant, and on track. This role follows a project‑driven, non‑traditional schedule, with start times and hours that vary based on construction activity and weather rather than a fixed 9-5 routine. You'll be trained to perform standardized material tests and inspections, learn how construction projects operate from the ground up, and build a strong foundation in construction materials testing Your Day-to-Day: • Perform hands-on material testing and inspections: Conduct standardized field and laboratory tests on construction materials such as soil, concrete, asphalt, and masonry to confirm they meet project and industry requirements., • Support active construction projects on-site: Work alongside contractors, inspectors, and project teams to observe construction activities, verify material placement, and ensure quality control processes are followed., • Document results accurately and consistently: Record test results, observations, and site details using Metafield® or similar reporting systems to provide clear, organized project records., • Learn project requirements and inspection procedures: Review basic project documents and testing protocols before site visits to understand what needs to be inspected and how each test is performed. Want to Grow? This role offers growth through expanded testing capabilities, certifications, and increasing responsibility on construction projects. Many professionals in this position choose to build long-term careers in construction materials testing, inspection, and project support. What You Bring: • A Bachelor's degree in civil engineering, construction management, engineering technology, geology, or a related technical field, • Interest in hands-on, field-based work outdoors and learning how construction projects operate from the ground up, • 0-2 years of experience in construction materials testing, inspection, or field‑based construction work, • Willingness to earn required industry certifications within the first 6 months (company-supported training provided), • Basic math and communication skills (speaking, reading, and writing) using the English language, • The understanding of a fluctuating non-traditional weekly schedule and occasional travel Working Conditions and Physical Demands: You are willing and able to perform the physical demands of this position with the use of Company-provided Personal Protective Equipment, such as: • Working outdoors in varying weather conditions, moving and standing for extended periods of time (8+ hours a day), • Walking over rough, uneven terrain and standing for potentially long periods, • Routinely lifting and carrying 40-50lbs (field/laboratory samples and equipment), • Maneuver field equipment safely, such as a loaded wheelbarrow, on uneven ground around active construction sites, • Working outside of normal business hours when necessary We Are S&ME: At S&ME, we're committed to your growth, professionally and personally. With over 50 years of experience delivering innovative solutions in geotechnical, civil, environmental, and construction materials engineering, we've built a strong foundation for long-term careers. Our team of 1,000+ employee-owners across 10+ states works together to create meaningful impact for our clients and communities. When you join S&ME, you become part of a collaborative, honest, and people-focused culture that invests in your success. We offer exciting project opportunities, ongoing training, and a comprehensive benefits package to support you and your family. This is more than a job; it's a place to grow, thrive, and build a future. Here's what you can look forward to: • Medical, Dental & Vision Plans with HSA and FSA options, • Wellness Program - $50 off per month on your 2027 premiums!, • Pet Insurance, • Term Life & Long-Term Care Coverage - available Spring 2026, • 100% Employee Stock Ownership Plan (ESOP) with a 5% company contribution, • 401(k) Retirement Plan, • Paid Holidays and Paid Time Off (PTO) - with rollover options, • Paid Maternity & Parental Leave, • Mentorship & Career Development Programs, • Credential Incentive Program - get rewarded for advancing your skills, • Tuition Reimbursement, • Employee Recognition Program, • Company Vehicle & Fuel Card - for project-based roles, • $2,000 Employee Referral Bonuses - and more! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. Job Posted by ApplicantPro

Job Description Caton Construction Group, one of the Caton Companies, is growing! Our family owned company is seeking an experienced Pipe/Utility Foreman for our Bridge & Roadway Project in Winston-Salem, North Carolina. THIS JOB POSTING IS FOR OUR WINSTON-SALEM, NC, PROJECT. Summary/Objective The Pipe/Utility Foreman is a field position that is responsible to organize and lead a crew to safely and efficiently perform construction activities. The Foreman works under the general direction of the Superintendent. Must also be an experienced heavy equipment operator. Essential Functions · Coordinating construction work according to priorities and plans. · Plan, organize and lead grading crew. · Producing schedules and monitor attendance of crew. · Allocating general and daily responsibilities. · Coordinate tasks according to priorities and plans. · Schedule aggregate material quantities and deliveries. Determine trucking needs and schedule truck. · Allocate general and daily responsibilities. · Supervise and train workers and tradespeople. · Ensure labor and other resources are adequate. · Guarantee all safety precautions and quality standards are met. · Supervise the use of machinery and equipment. · Monitor expenditure and ensure it remains within budget. · Resolve problems when they arise. · Report on progress to managers, engineers etc. Position Type and Expected Hours of Work This is a full-time position. Normal days and hours of work are Monday – Friday, 7:00 a.m. – 3:30 p.m. with time provided for lunch, hours may vary. Work may be local or out of town in which case overnight stays are required. This position frequently requires long hours and weekend work. Travel/ Driving Travel is primarily local during the business day, although some out-of-area and overnight travel may be expected. Driver’s license is required. Supervisory Responsibility Assigning work to subordinates, as well as establishing deadlines and modifying work schedules to meet deadlines as needed Required Education and Experience · High school diploma or equivalent. · Proven experience as construction foreman · diploma in a skilled trade (electrician, carpenter etc.) a plus. Why you should apply: Excellent working environment Working for a company that cares about your success Working for a growing company with great benefits! Employment is conditional on satisfactorily completing all pre-employment requirements including background and drug screen. Starting wages depend skills and experience. Equal Opportunity Employer - Minorities and females are encouraged to apply.

Job Description Location: Belville, NC Job Summary: The Irrigation Foreman is responsible for leading a crew in the installation of irrigation systems on construction projects. This role requires hands-on leadership, project planning, safety enforcement, and close collaboration with the Construction Manager to ensure timely, high-quality installations that meet client expectations and company standards. Key Responsibilities: • Confirm all crew members are present and ready before leaving the shop daily, • Plan and review each day’s schedule in advance for productivity and efficiency, • Ensure trucks and equipment are fueled and properly maintained each day, • Communicate daily progress and updates with the Construction Manager, • Prepare and stage all necessary materials in advance of scheduled work, • Report material and job site needs to the Construction Manager promptly, • Enforce and model safety practices across all job sites, • Lay out irrigation systems according to design plans, • Ensure irrigation installations are completed accurately, efficiently, and to spec, • Maintain clean, organized job sites throughout each project, • Perform and oversee maintenance of tools and equipment, • Valid driver’s license (required), • Proven experience leading irrigation crews and managing commercial installations, • Ability to read and interpret landscape and irrigation blueprints, • Familiar with both 2-wire and conventional wired systems, • Skilled in operating trenchers and other irrigation equipment, • Ability to adapt in the field and make design adjustments as needed, • Strong problem-solving and decision-making skills, • Excellent communication and leadership skills, • Bilingual preferred but not required, • Willingness to work overtime and occasional weekends, • Ability to train and develop crew members, • Must be able to lift up to 50 pounds., • Must be able to stand for long periods. At PureGreen Land Group, we’re not just leaders in the green industry — we’re innovators, visionaries, and community builders. We take pride in delivering top-tier landscape construction services rooted in quality, sustainability, and client satisfaction. We're seeking an experienced and motivated Irrigation Foreman to join our Construction Team and lead the charge in building high-performance irrigation systems on commercial job sites. Culture: Benefits & Compensation: • Comprehensive Benefits Package: Health, AFLAC, Dental, and Vision insurance., • 401k Retirement Plan: Employer contribution to help you save for the future., • Paid Time Off- 40 Hours of PTO, • Personal Days- 2 Personal Days, • Professional Development: Opportunities for growth within the landscaping industry., • Company-Provided Resources: Company truck during work hours & Cell Phone Stipend, • Yearly Boot Stipend, • Paid Company HolidaysWhy Join PureGreen? Growth Opportunity: As a rapidly growing company, we offer clear paths for career advancement and leadership development. * Team Culture: Work with a crew that values respect, teamwork, and excellence every day. * Stability & Year-Round Work: Enjoy consistent, year-round work with a company that values long-term employment. * Recognition & Appreciation: We reward hard work with recognition programs, team events, and performance bonuses. * Training & Development: Access to continued training and development to enhance your skills and grow your career in landscape construction.

Job Description Overview Join CTG and Elevate Your Career! CTG has proudly partnered with a Fortune 500 client for over 15 years. We invite you to apply for this exciting opportunity! CTG's premier client has a contract assignment for an Electrical Technician III. Type: Contract Job Title: Electrical Technician III Location: Wilmington, NC Candidates must be able to commute and work onsite in Wilmington, NC Pay Rate: $42-47 per hour Work Hours: M-F 8am-5pm Education: AAS in Electrical Engineering Technology, BS in Electrical Engineering Technology, or BS in Electrical Engineering (equivalent work experience may be considered in rare circumstances) The ideal candidate will possess strong soft skills as well as: • Hands-on experience in installation support for new or modified production equipment., • Troubleshooting expertise in Mechanical and Electrical Systems., • Supervisory skills for guiding internal maintenance and contract trades during installation and conversion processes.Description:, • Perform hands-on installation support for new or modified production equipment., • Supervise and direct internal maintenance and outside contract trades throughout the equipment installation and conversion process, including demolition, construction, testing, and debugging., • Conduct troubleshooting and documentation of Electrical and Controls Systems for new or modified production equipment., • Modify existing documentation to create comprehensive drawing packages, installation checklists, machine part lists, illustrations, and specifications., • Assess existing equipment for compatibility with new installations.Major Responsibilities:, • Execute initial equipment set-up and debug processes before turnover to operations., • Provide second-level troubleshooting support and coordinate the replacement of defective components., • Procure and expedite materials for new or modified equipment., • Develop electrical installation checklists and schedules, overseeing their application., • Prepare work orders and lead maintenance personnel and outside trades in equipment fabrication and assembly., • Update installation documentation and drawings as needed., • Train internal maintenance and contract trades on new installation procedures., • Analyze and improve equipment installation practices to enhance efficiency.Required Qualifications:, • Education: AAS in Electrical Engineering Technology, BS in Electrical Engineering Technology, or BS in Electrical Engineering (equivalent work experience may be considered)., • Experience: Minimum of 5+ years in a similar role.Top Skills:, • Successful hands-on installation support experience., • Proven troubleshooting and documentation skills for Electrical and Controls Systems., • Supervisory experience in maintenance and contract trades during equipment installation.Additional Information:, • No third-party resumes will be accepted., • Drug testing and/or other employment-related inquiries may be conducted., • CTG will consider qualified applicants with criminal histories in compliance with applicable laws., • All candidates must be able to work on a W2 Tax basis (no C2C or third-party vendors).

Job Description Michael and Son Services, Inc., founded in 1976 and based in Alexandria, VA, is a leader in providing top-tier Electrical, Plumbing, HVAC, and Restoration services across Maryland, Virginia, North Carolina and South Carolina. We are committed to delivering superior customer service, professionalism, and acting with integrity in everything we do. Do you have the energy and drive to join our Wilmington team? If you're ready for a company that values your expertise, rewards your hard work, and expects honesty and transparency in all dealings, this is the place for you! Position Summary: Provide maintenance on residential heating and air conditioning systems according to company standards, providing the customer with a high-quality experience. Has the ability to communicate an explanation of services provided. Education and Experience: • Minimum High School diploma, GED or equivalent preferred, • Previous HVAC experience preferred, • Ability to interpret wiring diagrams and blueprints is preferred, • Must possess or be able to acquire EPA certification within 3 months of entering the position, • Knowledge of duct cleaning practices preferred, • Comprehensive Pay and Benefits package, including:, • Performance Based Pay, • Medical, dental, and vision insurance, • Flexible Spending Account (FSA), • Short-term/long-term disability insurance, • Life insurance, • Matching 401(k) Retirement Savings Plan, • Referral bonus program (Earn up to $2,000), • Uniforms provided with a weekly laundering program, • Employee discounts

Job Description Do you thrive in an outdoor work environment and want to be part of an exciting environmental industry? Dragonfly Pond Works is a fast-growing company, offering year-round work, and provides long-term career opportunities. Join our "swarm" today! Location: Wilmington, NC 28401 Pay: $18- $22 an hour- Full-time Requirements • North Carolina Aquatic Pesticide Applicator License or be able to obtain a license within 30 days of hire., • Experience in lake and pond management, pest/herbicide control or surveying is preferred., • Experience in the following disciplines are desirable: fisheries, wildlife management, conservation, ecology, biology, environmental sciences or forestry., • Valid Driver's License., • Ability to work outside in all weather conditions., • Able to swim and comfortable around water., • Ability to lift 80 pounds on a regular basis., • Great communication skills., • Basic math skills to calculate product applications., • Mechanically inclined., • Occasional travel may be required., • Team-oriented and aligned with Dragonfly's values: Quality Focus, Takes Ownership, and Growth Oriented.Key Responsibilities:, • Identify and treat invasive weeds., • Visual inspection of stormwater components., • Mowing/string trimming sites., • Improving the overall aesthetics of the sites., • Minor repairs for compliance., • Implement safety training for field staff., • Handle administrative duties. Benefits & Perks: • Health, Dental, and Vision Insurance, • 401(k) matching, • Life Insurance, • Flexible Spending Accounts, • Paid Time Off, • Holiday Pay, • Employee Assistance Program, • Referral Bonus, • Protective Footwear Bonus Potential Growth Path • Regional Manager, • Branch Manager, • Director of Operations Dragonfly Pond Works is a leading environmental service company specializing in stormwater management. Since 2006, Dragonfly has provided routine maintenance and repairs on stormwater devices, lakes, ponds, wetlands, and underground facilities. We are proud to have a very respectful work environment and expect all our employees to adhere to the same standard throughout the organization. We are proudly an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin. Job Posted by ApplicantPro

Job Description JOB LOCATION: Wilmington, NC POSITIONS: 1 PRIMARY FUNCTION: Position is responsible for the efficient management of assigned plant and operations. This position has direct responsibility for personnel, equipment, scheduling, safety, quality, workmanship, and completion of assigned projects on time and within the estimated budget. This position may include duties within, but not be limited to: Asphalt Material, Equipment, Plant, and Electrical. ESSENTIAL DUTIES: 1.) Supervise and direct crew to assure completion of assigned project as instructed by the superintendent and/or other manager. Includes human resources and employee related matters. 2.) See that new personnel receive proper orientation to acquaint them with company policies, safety requirements, and job responsibilities. 3.) Conduct periodic evaluation of assigned personnel with special emphasis on their contribution to the company and our contribution to them. 4.) Assist and direct crews in proper use of equipment, improving job performance, controlling cost and quality of work, increasing productivity, improving communication and housekeeping on project. 5.) Perform equipment inspections, request maintenance and repairs as needed. 6.) Order materials as needed for the project or operation of the plant. 7.) Monitor assigned personnel and maintain regular work hours. Maintain daily payroll records and log hours worked for each employee assigned to you. 8.) Complete all required daily reports, verify their accuracy and transmit promptly to the supervisor. 9.) Ensure all work complies with OSHA, MSHA, local laws, ordinances, and EPA regulations. 10.) Ensure all work is performed with an emphasis on safety. Insist upon compliance of all safety regulations. Conduct daily huddle meetings with safety as the primary agenda. 11.) Maintain good relations with the general public, engineers, architects, inspectors and customers to facilitate job progress and to promote a positive company image. Develop a courteous and considerate attitude toward these groups. 12.) Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year. 13.) Perform necessary work while complying with all company policies and procedures. 14.) Perform additional duties as required in the operations of the project or plant, or as directed by the supervisor. 15.) Must have regular and predictable attendance. MINIMUM REQUIREMENTS: Education: • Must be a minimum of 21 years old Work Experience: • Minimum of 3 years' experience in asphalt plant operations, • Experience with NCDOT requirements Physical Demands: Light physical effort required including pulling and lifting or moving materials up to 20 pounds. If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required. Physical Activity: Position requires the ability to continuously work around noise, dust, heat, cold, oil, and heavy equipment. Personal protective equipment may be required. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions. The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time. EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.

Job Description CNC Lathe Machinist Schedule: Full-Time About Us Proudly serving our clients for over 40 years, we continue to expand thanks to long-term contracts and a reputation for precision and reliability. As we continue to grow, we’ve invested in brand-new, state-of-the-art machines and are expanding our team with skilled professionals who take pride in craftsmanship, innovation, and quality. If you’re looking for a place where your expertise is valued, your ideas matter, and your work makes a real impact, we’d love to have you on our team. Why Master Machining? At Master Machining, we’re more than just a workplace, we’re a family. You’ll be surrounded by experienced machinists who take pride in mentoring others, leaders who value your input, and an environment built on respect, teamwork, and precision. With new equipment, competitive pay, and a supportive culture, you’ll have everything you need to build a rewarding career. What We Offer • Competitive hourly pay from $26–$40/hr, based on experience, • Consistent 40–50 hour work weeks with overtime available, • 401(k) with company match after one year of service, • Quarterly “Earned Days” program – earn paid time off for consistent attendance, • Yearly reviews, • Paid birthday off every year Health & Wellness • Medical insurance (company pays up to $460/month toward individual coverage), • Option to decline coverage and receive an additional $1.65/hour in pay, • Dental and vision coverage available Time Off & Recognition • 8 paid holidays, plus Veterans Day off (with pay) for all who served, • 40 hours paid vacation after one year, increasing with tenure, • Catered Veteran’s Day lunch to honor our military team members, • Opportunities for long-term growth and cross-training Your Role As a CNC Lathe Machinist, you’ll play a key role in bringing precision parts to life. You’ll be responsible for setting up, programming, and operating CNC lathe machines to meet high-quality standards. Working with close tolerances, you’ll ensure every part produced meets print specifications and reflects the craftsmanship Master Machining is known for. Your Responsibilities: • Program, set up, and operate various CNC lathe machines, • Verify dimensions and tolerances using precision measuring instruments, • Read and interpret blueprints, job tickets, and production drawings, • Perform regular machine maintenance and tool adjustments, • Load and indicate parts to fixtures with precision, • Monitor tool wear, replace inserts, and adjust programs as needed, • Collaborate with your team to ensure accuracy, efficiency, and consistency What We’re Looking For: • 3–5 years of CNC lathe machining experience, • Proficient in G-code programming and machine setup, • Strong understanding of blueprint reading and measurement tools, • Ability to work within tight tolerances and maintain quality standards, • Excellent work ethic and attention to detail, • Reliable, self-motivated, and team-oriented, • Willingness to work overtime or Saturdays as needed, • Experience handling both large and small components Current List of Our Machines: • Haas ST-40 4" Bar, 25.5" Chucking, • Doosan TT2100SYYB 3" Bar, 9" Chucking, • Twin Turret with Bar Feeder, • Mori-Seiki Fronteir LII 10" x 24" • Haas SL-10 with Bar Loader, 1-5/8" capacity, • Tsugami-TMA8F Multi Axis Turning Center with Bar Feeder, • Tsugami-M08SY Live Tooling & Sub Spindle with Bar Feeder (3), • Tsugami-M08SY Live Tooling and Sub Spindle with Gantry Loader • Haas VF 2 SS w/4 axis (3) 30" x 16" x 20", • Haas VF 3 SSYT w/4 axis (2) 40" x 26" x 25", • Haas VF 3 SSYT w/5 axis (2) 40" x 26" x 25", • Haas VF 10 32" x 120" x 30", • Haas EC-400 PP Horizontal 6 Pallet Pool 22" x 25" x 22, • Timemaster Super AT Lathe 40" x 120", • Clausing-Metosa Engine Lathe 24" x 108", • Clausing Colchester Lathe 15" x 40" (2), • Acer 3VKH E-Mill Vertical Milling Machine, • Acer 3VK Ultima Vertical Milling Machine (3), • Tsugami BN-20 w/6th axis 20 MM Dia, • Tsugami B012-III w/4th axis 12 MM Dia., • Tsugami S206-II w/6th axis 20 MM Dia., • Supertech 618 Automatic Surface Grinder 6" x 18", • O.D. Grinder 14" x 22", • Agie-Charrmilles F1 440 CCS, • Climate Controlled QC Lab, • Brown & Sharpe CMM DCC ONE 7.7.5 28"m x 28" x 20", • Brown & Sharpe Micro-Hite 900 (2), • Mitutoyo PH-A14 Optical Comparator w/DRO, • J & L PC-14-A Optical Comparator w/DRO, • Mitutoyo 178-561-02A Surftest, • Full Complement of Thread, Ring and Bore Gaging, • Accupress Advantage 177512 Press Brake, • Amada FaB.50 D Press Brake, • National NR4316 Sheet Roller, • Akyapak 1550 Plate Roller, • PEMserter series 2000 w/Feeder, • Shop Sabre 4896 CNC Router, • 351 Syncrowave 350 amp, • Aircrafter 330ST 300 amp, • 250 Syncrowave DX 250 amp, • 200 Dynasty 200 amp, • 350 Dynasty 350 amp, • 400 Dynasty (Miller), • Millermatic 250 (2), • Burco/Koco KST-9 Stud, • Trumpf Trulaser 3030 60" x 120" Fully Automated, • Trumpf 2530 48" x 96" Auto Pallet Shuttle System., • Minilase Pro SE 12" x 12" x 20", • Cosen C-510MNC Production Band Saw 13" x 20", • TechniIntel G2 713 78.7" x 157.5" Apply Now Ready to take your machining career to the next level? Apply today and join a company where your skill and dedication make all the difference.

Job Description Manual Lathe Machinist | 1st Shift Opportunity at Master Machining, Inc. Schedule: Full-Time | 1st Shift About Us Proudly serving our clients for over 40 years, we continue to expand thanks to long-term contracts and a reputation for precision and reliability. As we continue to grow, we’ve invested in brand-new, state-of-the-art machines and are expanding our team with skilled professionals who take pride in craftsmanship, innovation, and quality. If you’re looking for a place where your expertise is valued, your ideas matter, and your work makes a real impact, we’d love to have you on our team. Why Master Machining? At Master Machining, we’re more than just a workplace, we’re a family. You’ll be surrounded by experienced machinists who take pride in mentoring others, leaders who value your input, and an environment built on respect, teamwork, and precision. With new equipment, competitive pay, and a supportive culture, you’ll have everything you need to build a rewarding career. What We Offer • Competitive hourly pay from $26–$40/hr, based on experience, • Consistent 40–50 hour work weeks with overtime available, • 401(k) with company match after one year of service, • Quarterly “Earned Days” program – earn paid time off for consistent attendance, • Yearly reviews, • Paid birthday off every year Health & Wellness • Medical insurance (company pays up to $460/month toward individual coverage), • Option to decline coverage and receive an additional $1.65/hour in pay, • Dental and vision coverage available Time Off & Recognition • 8 paid holidays, plus Veterans Day off (with pay) for all who served, • 40 hours paid vacation after one year, increasing with tenure, • Catered Veteran’s Day lunch to honor our military team members, • Opportunities for long-term growth and cross-training Your Role As a Manual Lathe Machinist, you will operate manual lathe machines to produce precision components that meet exact specifications. You’ll use technical skill and experience to ensure accuracy, consistency, and craftsmanship in every part, while contributing to the quality and reputation that define Master Machining. Your Responsibilities: • Set up and operate various manual lathe machines, • Read and interpret blueprints, job tickets, and technical drawings, • Verify that parts meet all print specifications using precision measuring tools, • Perform regular machine maintenance and monitor tool wear, • Load, indicate, and secure parts accurately to fixtures, • Work efficiently to meet production timelines and maintain quality standards, • Collaborate with team members and leadership to ensure workflow efficiency What We’re Looking For: • 3–5 years of hands-on manual lathe experience, • Strong knowledge of manual machining processes and tolerances, • Skilled in measurement tools and blueprint reading, • Ability to work with large and small components, • Excellent communication and teamwork skills, • Dependable, detail-oriented, and quality-driven, • Willingness to work overtime or occasional Saturdays when needed Current List of Our Machines: • Haas ST-40 4" Bar, 25.5" Chucking, • Doosan TT2100SYYB 3" Bar, 9" Chucking, • Twin Turret with Bar Feeder, • Mori-Seiki Fronteir LII 10" x 24" • Haas SL-10 with Bar Loader, 1-5/8" capacity, • Tsugami-TMA8F Multi Axis Turning Center with Bar Feeder, • Tsugami-M08SY Live Tooling & Sub Spindle with Bar Feeder (3), • Tsugami-M08SY Live Tooling and Sub Spindle with Gantry Loader • Haas VF 2 SS w/4 axis (3) 30" x 16" x 20", • Haas VF 3 SSYT w/4 axis (2) 40" x 26" x 25", • Haas VF 3 SSYT w/5 axis (2) 40" x 26" x 25", • Haas VF 10 32" x 120" x 30", • Haas EC-400 PP Horizontal 6 Pallet Pool 22" x 25" x 22, • Timemaster Super AT Lathe 40" x 120", • Clausing-Metosa Engine Lathe 24" x 108", • Clausing Colchester Lathe 15" x 40" (2), • Acer 3VKH E-Mill Vertical Milling Machine, • Acer 3VK Ultima Vertical Milling Machine (3), • Tsugami BN-20 w/6th axis 20 MM Dia, • Tsugami B012-III w/4th axis 12 MM Dia., • Tsugami S206-II w/6th axis 20 MM Dia., • Supertech 618 Automatic Surface Grinder 6" x 18", • O.D. Grinder 14" x 22", • Agie-Charrmilles F1 440 CCS, • Climate Controlled QC Lab, • Brown & Sharpe CMM DCC ONE 7.7.5 28"m x 28" x 20", • Brown & Sharpe Micro-Hite 900 (2), • Mitutoyo PH-A14 Optical Comparator w/DRO, • J & L PC-14-A Optical Comparator w/DRO, • Mitutoyo 178-561-02A Surftest, • Full Complement of Thread, Ring and Bore Gaging, • Accupress Advantage 177512 Press Brake, • Amada FaB.50 D Press Brake, • National NR4316 Sheet Roller, • Akyapak 1550 Plate Roller, • PEMserter series 2000 w/Feeder, • Shop Sabre 4896 CNC Router, • 351 Syncrowave 350 amp, • Aircrafter 330ST 300 amp, • 250 Syncrowave DX 250 amp, • 200 Dynasty 200 amp, • 350 Dynasty 350 amp, • 400 Dynasty (Miller), • Millermatic 250 (2), • Burco/Koco KST-9 Stud, • Trumpf Trulaser 3030 60" x 120" Fully Automated, • Trumpf 2530 48" x 96" Auto Pallet Shuttle System., • Minilase Pro SE 12" x 12" x 20", • Cosen C-510MNC Production Band Saw 13" x 20", • TechniIntel G2 713 78.7" x 157.5" Apply Now Ready to take your machining career to the next level? Apply today and join a company where your skill and dedication make all the difference.

A maintenance skills assessment is administered during the interview process for this position. A physical demonstration of your ability to complete the basic job duties will be required during the interview process.

Warehouse Workers are responsible for building pallets, picking orders, loading delivery trucks, unloading incoming shipments, moving product throughout the warehouse, and using pallet jacks or forklifts to transport products. Warehouse Workers are responsible for picking orders using pick sheets or

Communicate effectively with customers and Carpenter, Improvement, Professional, Improvement, Home, Business Services.

Do you have a talent for making repairs and solving problems? Are you looking to enhance your skills and take your career to the next level? How do you feel about being the go-to person responsible for keeping production up and running? Well if you're teachable and someone who takes pride in their w

This commercial construction company is looking for an Estimator with excellent people skills and proven work history with commercial construction projects. Construction Management or a related degree is strongly preferred. Prepare and estimate budget costs for construction including labor and mater

Job DescriptionDescription: The Housekeeping Inspector for Residence Inn Landfall is responsible for ensuring property guestrooms/suites, all public space, and associate areas are clean and well maintained. Completes inspections and holds housekeeping staff accountable for corrective action and to Corporate and Brand policies, procedures and standards. Position assists in ensuring guest and Associate satisfaction while maintaining the operating budget. PREREQUISITES/QUALIFICATIONS: · Experience in housekeeping or related professional area · Command of English including speaking, reading, writing · Familiar with inventory controls and ordering · Effective communication skills · High energy and professional demeanor · Basic computer skills Requirements: · This position require weekends (Saturday and/or Sunday). · Ensures guest room status is communicated to Front Desk in a timely and efficient manner · Inspects guest rooms, public areas and staff areas on a daily basis · Inventories stock to ensure adequate supplies · Supports and supervises an effective inspection program · Ensures all Associates have proper supplies, equipment, safety equipment, and uniforms · Communicates quickly and efficiently to management and maintenance areas that need attention and maintenance · Ensures hotel is prepared to successfully complete a Quality Assurance audit · Recognizes Associates and uses an “open door policy” for good work and guest relations

Job Description JOB LOCATION: Wilmington, NC AVAILABLE POSITIONS: 1 PRIMARY FUNCTION: Perform general tasks involving physical labor as well as operating the loader and Bobcat at pits and/or plants. May operate hand and power tools of all types: Air hammers, small mechanical hoists, and a variety of other equipment and instruments. May clean and prepare sites, dig trenches, set braces for support, cleaning up rubble and debris and keeping plant yard clean at all times. ESSENTIAL DUTIES: Loader Operator • Operate loader as needed for moving and loading materials at pits or on plant yard. May also be required to use jackhammers, drills and other power tools., • Position, join, align, and seal structural components., • Shovel materials., • Signal equipment operators to facilitate alignment, movement, and adjustment of machinery, equipment, and materials., • Spray materials such as water, sand, steam, or paint through hoses to clean, coat, or seal surfaces., • Tend all machines used in the day to day operations., • Tend pumps, compressors, and generators to provide power for tools, machinery, and equipment, or to heat and move materials., • Lubricate, clean, and repair machinery, equipment, and tools., • Apply caulking compounds by hand or using caulking guns., • Clean and prepare sites to eliminate possible hazards., • Control traffic passing near, in, and around work area., • Erect and disassemble scaffolding, shoring, braces, ramps, and other temporary structures., • Load, unload building materials, machinery, and tools., • Mix ingredients to create compounds for covering or cleaning surfaces., • Learn and follow safety regulations., • Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year., • Perform additional duties as required or directed by their immediate supervisor or other manager., • Must have regular and predictable attendance. MINIMUM REQUIREMENTS: Education: • Good work ethic., • 1 years experience required. We will train., • Understanding of asphalt plant operations a plus., • Candidate will need to have dependable transportation to and from work., • Willing to work overtime and weekends., • Able to climb ladders and not afraid of heights. Heavy physical effort required including pulling and lifting or moving heavy weight material with frequent lifting or moving materials or equipment (over 80 pounds). If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required. Physical Activity: Position requires the ability to continuously work around any or all of the following: noise, dust, heat, cold, oil and heavy equipment. Personal protective equipment is normally required of the position. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions. The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time. EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.

Job DescriptionDescription: We are looking for an experienced, detail-oriented individual to join our team. As Room Inspector, you will be responsible for inspecting our hotel rooms to ensure they meet all standards of cleanliness, safety, and comfort. You will be responsible for consistently meeting the hotel's quality assurance standards for each room, as well as interacting with hotel guests to ensure their satisfaction. If you think you have the attention to detail and customer service skills necessary to be successful in this role, we want to hear from you. Job Responsibilities • Perform daily walk-throughs of all guest rooms and common areas to ensure they meet the hotel's standards of cleanliness and maintenance, • Inspect all furniture, fixtures, and equipment in each room and common area to ensure they are in good working order, • Report any safety hazards and maintenance issues to the appropriate personnel, • Collaborate with housekeeping staff to resolve any deficiencies or special requests in guest rooms, • Respond to guest inquiries and complaints in a prompt and courteous manner, • Ensure all safety regulations, hotel policies, and procedures are followed, • Provide guests with information on hotel services and amenities, • Stay up-to-date on all hotel policies and procedures as well as local attractions, • Maintain accurate records of inspections and maintenance activities, • Monitor room inventory and occupancy ratesRequirements:, • Ability to inspect hotel rooms for cleanliness and maintenance issues, • Ability to work independently and as part of a team, • Ability to interact with guests and hotel staff in a professional and courteous manner, • Attention to detail, • Ability to follow safety protocols, • Ability to lift up to 50 lbs, • Ability to read and understand instructions, • Ability to identify potential hazards, • Experience in hospitality or housekeeping is a plus, • Ability to use cleaning tools and equipment, • Ability to work flexible hours, including evenings and weekends

Job DescriptionDescription: amber- could you please add the discription ? thank you Requirements:

Job Description Maintenance Technician / Handyman Elderhaus / Elderhaus at the Lake In-Person | Full-Time Be the Go-To Fix-It Person Who Makes a Difference Every Day! Are you the kind of person people call when something breaks? Do you enjoy working with your hands, solving problems, and keeping buildings running smoothly? We’re looking for a reliable, versatile Maintenance Technician / Handyman to help maintain a safe, clean, and welcoming environment for the seniors we serve. This is a true handyman role! Perfect for someone who enjoys variety, independence, and using practical skills across mechanical repair, light electrical, plumbing, painting, and general facility maintenance. What You’ll Do (Day-to-Day) As our Maintenance Technician, you’ll be responsible for keeping our buildings, equipment, and grounds in safe and excellent condition. Hands-On Maintenance & Repairs: • Perform general handyman work: repairs, troubleshooting, adjustments, and preventive maintenance, • Maintain mechanical and electrical systems, • Repair lighting, fixtures, doors, walls, flooring, and other facility components, • Maintain interior and exterior of buildings, • Perform landscaping and grounds maintenance (mowing, trimming, mulching, planting, etc.), • Respond promptly to maintenance requests from staff and participants, • Conduct routine inspections and report issues before they become problems, • Follow Life Safety Codes, OSHA guidelines, and infection control procedures, • Install various equipment as requested, • Assist with safety, fire prevention, and security efforts, • Support special maintenance projects as assigned What We’re Looking For You’re a great fit if you… • Have strong handyman-style skills and enjoy working independently, • Are comfortable with tools, small power equipment, and problem-solving, • Take pride in quality work and attention to detail, • Communicate clearly and work well with a team, • Enjoy helping others and contributing to a mission-driven organization Required Qualifications: • High school diploma or equivalent, • Valid driver’s license, insurance, and reliable transportation, • Ability to lift up to 50 lbs and perform physical tasks (standing, walking, lifting), • Prior experience as a maintenance technician or handyman, • Experience working with seniors or in healthcare/community settings, • HVAC, electrical, or plumbing certification, • Experience with pest control, landscaping, or facility inspections Work Environment • Active, hands-on role in a healthcare/community setting, • Indoor and outdoor work with changing conditions, • Occasional time-sensitive or high-priority repair needs Why Work at Elderhaus? • Meaningful work that directly supports older adults in your community, • Stable, full-time position with consistent responsibilities, • Opportunity to use a wide range of practical maintenance skills, • Mission-driven organization focused on dignity, safety, and quality of life Benefits: • 403B/403B matching, • Employee assistance programs/discounts, • Dental and vision insurance, • Medical/health insurance, • Life insurance, • Paid time off, • Referral programs/tuition reimbursement Ready to Apply? If you’re a dependable handyman-style maintenance professional who enjoys variety, responsibility, and making a difference, we’d love to hear from you. Apply today and become an essential part of our team! EOE/Disability/Vets

Job DescriptionDescription: Job Summary We're looking for a skilled and motivated Electrical Technician to join our growing team. Your expertise will help us deliver exceptional service to our customers while upholding the highest safety, NEC, and quality standards. Responsibilities • Use a company issued iPad to log daily tasks, prepare estimates, and communicate with customers., • Install, maintain, and repair single- and three-phase electrical systems in residential and commercial settings., • Collaborate with other trades on jobsites to ensure efficient and coordinated project completion., • Communicate with homeowners and business owners about electrical system performance, efficiency improvements, and tailored solutions., • Ensure all work complies with local regulations and National Electric Code standards., • Maintain a clean and safe work environment while adhering to safety protocols. Requirements: • Minimum of 3 years experience in the electrical field, • Proven experience installing, maintaining, and repairing electrical systems, • High school diploma or equivalent, • Electrical education and/or license, • Valid drivers license, • Ability to work in tight spaces and lift 50 lbs., • Ability to work independently and collaboratively on jobsites, • Strong communication skills to interact effectively with customers and team members, • Excellent problem-solving skills and attention to detail

Maintain, diagnose, repair, calibrate, and modify, as assigned, mechanical, electro-mechanical and electronic control systems for CNC machine tools, manufacturing processes, test equipment and other associated equipment. With 600,000 square feet of manufacturing space, 300+ CNC machines, and 21 spec

Job Description Charlotte, Raleigh or Wilmington Ready to take your estimating skills to the next level? Highland Roofing is looking for a seasoned commercial roofing estimator to join our growing team in Charlotte, Raleigh, or Wilmington, NC. If you're passionate about roofing and want to work with a company that treats you like family, we'd love to meet you. Why Highland? We're not just another roofing company. We're a team that values people first—and that includes you. Here's what you can expect when you join us: • Competitive pay + bonus programs + profit sharing, • Work/life balance with paid holidays and PTO, • Comprehensive benefits – medical, dental, vision & paid life insurance, • Room to grow as our company expands across the Carolinas, • 401(k) with company match to help you plan for the future, • Create accurate estimates and proposal letters for commercial roofing projects (new construction, replacements, coatings/restorations), • Read blueprints and specs to plan the best installation approach, • Use The Edge estimating software to build and maintain templates, • Document all quotes and sales in our company's software, • Collaborate with the team to meet productivity and profitability goals, • 3+ years of estimating experience (or strong roofing superintendent/project management background), • Solid knowledge of commercial roofing systems, • Detail-oriented with strong time management and organizational skills, • Able to work independently and juggle multiple tasks Highland Roofing has been serving the Carolinas for nearly 20 years with top-notch commercial roofing services. We've built our reputation by doing great work and always putting our clients first. With offices in Wilmington, Charlotte, and Garner, we're continuing to grow—and we want you to grow with us. Job Posted by ApplicantPro

Job DescriptionSalary: $18+ Hourly BOE Quick Video about Freeman Landscape Do you like to be outside? Do you like to stay active? Freeman Landscape is the leading landscape firm in Eastern NC. We have been making Wilmington a better place to live for over 26 years!! We currently have a position open in our installation department. We are looking for an individual that loves to be outside, has a strong work ethic, positive attitude and willingness to learn. Our employees love what they do and take pride in their work. We offer the best pay and provide the best benefits to the ones that make this company the best landscape firm in Wilmington. Are you ready to join our team? Do you possess these traits? • Great Communicator, • Positive Attitude, • Team Player, • Dependable, • Responsible, • Great Ethics and Integrity If so, apply with Freeman Landscape and start building your future with the best! • Valid NC Drivers License required Work Conditions: • Ability to work with hand tools, power tools, small engine equipment, • Ability to lift a minimum of 50 lbs. repeatedly through an entire work shift, • Ability to work in a fast-paced environment, • Requires good manual dexterity, • Excellent stamina is required, • Work near heavy equipment and other vehicles on a regular basis, • Work outdoors in various conditions including heat and humidity, rain, dust, noise, and cold An Equal Opportunity Employer

Job DescriptionWe are looking for a Service Technician to join our growing team! The right candidate will have a strong service technician background and Audi/VW Certified preferably but not required. The day-to-day duties include performing work on specific repair orders and diagnosing what repairs need to be done. Relocation Assistance: • Relocation assistance will be offered to Expert or Master Level Certified Technicians!Automotive Service Technician Benefits:, • Competitive sign on Bonus for certified Technicians., • And/or Relocation Reimbursement, • Health, dental, vision insurance, • 401k match, • Paid time off, • Growth opportunities, • Paid holidays, • 3 miles from Wrightsville Beach, NC, • Competitive pay, • Employee discount program, • Heated and cooled shop, • 4-10 schedule with a 5 day weekend every 3 weeks.Automotive Service Technician Responsibilities:, • Perform work specified on the repair order with efficiency and in accordance with dealership, • Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment, • Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc., • Communicate directly with the Service Advisor so that customers are informed if any additional service is needed. Provide an estimate of time needed for additional repairs, • Perform video Multi Point Inspections provided directly to customer, • Execute repairs under warranty to manufacturer specificationsAutomotive Service Technician Qualifications:, • 2+ years of Service Technician experience preferred, • High school diploma or equivalent,, • ASE Certifications or Audi/VW Certification, • College Automotive Program Graduate, • B,C level qualifications, including Diagnostic, Electrical and Engine Repair, • Dexterity, requiring a steady hand, excellent hand-eye coordination, • Mechanical and troubleshooting skills and ability to operate electronic diagnostic equipment, • Excellent customer service skills and basic computer competencies, • Positive, friendly attitude, along with an eagerness to improve, • Enjoy working in a dynamic environment, • Teammate with ability to collaborate with others effectively, • Ability to learn new technology, repair and service procedures and specifications, • Valid driver's license and clean driving recordWe are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionDescription: The Garden Center Associate is an entry-level, customer-facing position responsible for supporting daily retail operations. This role assists customers, operates the register, restocks merchandise, waters plants, and helps maintain a clean, organized, and welcoming garden center. The Associate works alongside Plant Advisors to ensure shoppers have a positive and efficient experience. Key Responsibilities • Greet and assist customers in a friendly and helpful manner, • Operate cash register and process sales transactions, • Restock plants, pottery, soils, and other merchandise, • Water and care for plants as directed, • Help load customer purchases into vehicles when needed, • Maintain clean, organized sales areas and displays, • Answer basic customer questions and direct them to Plant Advisors when needed, • Assist with receiving shipments and general store upkeepRequirements:, • Positive attitude and strong customer service skills, • Ability to work in a fast-paced retail environment, • Willingness to learn about plants and garden products, • Basic math skills and comfort handling cash transactions, • Ability to lift up to 40 lbs and work on feet for extended periods, • Reliable, punctual, and team-oriented, • Weekend availability during peak season, • Prior retail experience is a plus but not required, • Prior Garden Center/Nursery experience is a huge plus

Job Description Please stop by our local job fair for immediate consideration! 1020 Grandiflora Dr, Leland NC 28451 Please ask the front desk for the Southland Employment job fair! Fulfillment Center in Wilmington, NC is in need workers to build racks/shelving (PODS), moving materials, general cleanup of work site and other general warehouse duties. NO EXPERIENCE NECESARY Schedule: Monday- Friday / 7AM - 4PM Pay: $18hr (WEEKLY PAY !) Requirements/Details: • Steel toe boots required, • Repetitive work on your feet up to 9 hrs, • Must be comfortable working in a construction & warehouse environment, • PPE will be provided and must be worm (Hi visibility vest, safety glasses and helmet ), • Must be able to lift and carry up to 40 poundsCompany DescriptionWe are a National Staffing and Recruiting firm that serves a variety of industries. Our clients are small and medium sized businesses as well as Fortune 500 companies.We are a National Staffing and Recruiting firm that serves a variety of industries. Our clients are small and medium sized businesses as well as Fortune 500 companies.

Job DescriptionDay-in-the-Life on 3rd Shift At our Newton, NC (28658) facility, your shift begins with a review of the work orders waiting at your station. You’ll interpret specifications, set up equipment, and get hands-on with assembly and machining tasks that keep production humming overnight. You’ll inspect incoming parts, build components with hand and power tools, and run manufacturing equipment with a careful eye on safety, accuracy, and pace. As products come off your line, you’ll verify they meet quality standards, keep your area organized, and report any issues so the team can stay on schedule. Core Responsibilities • Complete assembly and machining activities according to established procedures and quality standards., • Read and interpret work orders, drawings, and specifications to plan each job., • Inspect parts and materials for damage or defects prior to assembly., • Use hand tools, power tools, and production machinery to build components., • Operate manufacturing equipment safely, efficiently, and in line with guidelines., • Verify finished products meet all specifications and quality criteria., • Maintain a clean, orderly, and safe workspace throughout the shift., • Follow all safety rules and regulatory requirements., • Support assembly processes and drive productivity., • Report equipment malfunctions, material issues, or process concerns promptly.What You Need to Succeed, • High School Diploma or GED is required., • Previous manufacturing experience is preferred, but not mandatory., • Ability to read and interpret work orders accurately., • Keen attention to detail and strong manual dexterity., • Capability to safely and effectively use hand tools, power tools, and machinery., • Basic knowledge of quality control concepts., • Team-oriented communicator who contributes to a positive shift culture., • Comfort working in a fast-paced environment with production targets., • Physical ability to lift up to 35 pounds as needed.Proficiencies, • Machine building and mechanical assembly, • Setting up machines for production runs

Job DescriptionDescription: Position: Service Technician II Location: Wilmington, NC The Service Technician II will travel to customer production facilities to inspect, troubleshoot, repair, and modify electric overhead bridge cranes and related material handling equipment. MINIMUM QUALIFICATIONS: 3-4 years of overhead crane service technician experience. • Must have strong verbal, written and interpersonal communication skills., • Demonstrate the ability to learn mechanical and industrial skills., • Candidate must be willing to travel and work in production environments, with some overnight travel is possible., • Ability to operate company phone and computer., • Ability to complete electronic forms in a timely manner., • Ability to stand/walk 95% of the workday., • Lift / Carry up to 40-50 pounds unassisted., • Squat, twist, reach, climb, and bend frequently., • Ability to push/pull material with equipment assistance., • Possess hand/eye coordination and bilateral dexterity (gross and fine)., • Possess depth perception and peripheral vision., • Subject to working frequently at considerable heights., • Medical / Dental / Vision Insurance, • 401k plan with match, • Company-paid short term disability insurance, • Long term disability insurance available, • Company-paid basic life insurance, • Employee assistance program, • Additional life insurance available, • 9 paid holidays, • PTO Program, • Tool purchase program, • Weekly pay periods with direct deposit DeSHAZO’s Mission: DeSHAZO is committed to elevating our clients’ business needs through custom-built cranes and tailor-made automation systems. We enhance our products by providing expert inspections, repairs, modernizations or rebuilds. Requirements:

Job DescriptionROLE DESCRIPTION: {{ account.name }} is seeking a qualified and empathetic professional for the role of {{ job.name }}. As a customer-oriented expert, you will market Life insurance services and products to benefit customers and their families. Your sales experience equips you to continually grow your income as you provide the necessary support and reassurance. As a strategic and emotionally intelligent resource to the community, we are excited to expand our successful agency with your skillset. RESPONSIBILITIES: • Consult on life insurance products to customers., • Assist customers with life insurance applications and claims., • Provide customers with information on life insurance plans and options., • Maintain compliance with life insurance regulations.QUALIFICATIONS:, • Knowledge of life insurance products and services., • Strong sales and customer service skills., • Previous experience in life insurance sales preferred.Opportunity:, • Base Salary + monthly commission/Bonus, • Matching 401-K, Health Benefits, Life isnuance, Paid Time off, • Established book of business to work from, • Training and development, • Work as part of a team that is funneling Life insuance opportunities to you weekly.

Estimator Position At Five Star Painting Of Wilmington. Five Star Painting of Wilmington is a locally owned painting service business that has been in business since 2011.

Great opportunity to join a global leading manufacturing company! This Jobot Job is hosted by: Matt Tassoni Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $140,000 - $155,000 per year A bit about us: Our client is an industry leading manufacturing company! Why join us? Medical Dental Vision PTO Company Car Career growth Job Details Product Marketing Manager We are seeking a dynamic Product Marketing Manager to help shape and drive the success of our product lines across multiple markets. This role offers the opportunity to combine strategic vision with hands-on execution, working closely with sales, engineering, and marketing teams to deliver innovative solutions and strong business growth. Key Responsibilities Identify new sales opportunities, target accounts, and applications to expand market presence. Develop compelling business proposals and solutions tailored to customer needs. Partner with sales teams, Field Application Engineers, and customers to support campaigns and strengthen relationships. Build deep expertise in our solutions and applications, positioning yourself as a trusted advocate within the organization. Provide market insights, including trends, customer needs, and competitive intelligence, to influence strategy and decision-making. Collaborate with Product Line Managers to guide products throughout their lifecycle, from planning and launch to promotion and growth. Work with web and marketing teams to create impactful content and campaigns; represent the company at industry trade shows and events. Develop business cases for new product investments that align with customer and market opportunities. Travel as needed to engage with customers, teams, and industry events. What We’re Looking For Bachelor’s degree in Business, Marketing, or a Technical/Engineering discipline (advanced degree a plus). 5+ years of experience in sales, product marketing, or business development within the IT, Telecom, Automotive, or Interconnect industries. A proactive, “roll up your sleeves” attitude with a strong sense of ownership. Excellent interpersonal skills and proven ability to build strong relationships across teams and with customers. Highly self-motivated, with strong organizational skills and work ethic. Strong communication skills, both written and verbal, with the ability to influence and inspire. Comfortable working across different time zones and cultures. Proficiency in Microsoft Office (Word, Excel, PowerPoint, Outlook). Willingness to travel frequently to support business initiatives. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Edwards, Inc. is a full-service industrial general contractor providing construction, fabrication, and crane services. We operate one of the largest fleets of road ready hydraulic cranes in North Carolina, Virginia, and South Carolina. We are currently seeking a Class A CDL Driver / Rigger. Ideal Candidates Should Have: Physical requirements include, but are not limited to: • Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions., • Work in awkward spaces and/or positions including confined spaces and climbing., • The ability to routinely lift up to 80+ lbs. and push up to 60 lbs., • Requirements, • 3+ years' experience, • Valid Driver's License, • Clean Driving Record, • Class A CDL License, • Excellent communication skills and commitment to safety, • Additional Skills, • Experience in hauling oversized loads is a plus, • HS Diploma or Equivalent, • Health / Dental Insurance, • Disability, • Life Insurance, • Paid Time Off: Vacation and Holiday, • 401(k) Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed on our website . Questions regarding applications can be emailed to . Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify.

Job Description Mavis Tires & Brakes at Discount Prices - Automotive Alignment Technicians Put your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for a full-time Automotive Alignment Technicians to join Team Mavis at one of our state-of-the-art automotive service, repair and tire sales centers in the N. Hickory, NC area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. About the Position of Automotive Alignment Technician Automotive Alignment technicians use the latest equipment to align newly-mounted tires and wheels on customer's vehicles. By measuring and adjusting caster, camber, toe and thrust angles, our Automotive Alignment Technicians reduce customer's tire wear and ensure serviced vehicles travel straight and true. Mavis's Alignment Technicians also complete state-mandated inspections, oil and filter changes and flat repairs, and perform any other required automotive service or vehicle repairs to customer vehicles. Employee Benefits At Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement. Qualifications We recruit team members who share our commitment to providing complete customer satisfaction and delivering the highest quality service. To be eligible for the position of Automotive Alignment Technicians you must (1) be at least 18 years of age; (2) be legally authorized to work in the United States; and (3) possess 1 year of experience and/or training in dismounting, mounting, rotating and balancing tires or any combination of education, training and experience which demonstrates the ability to perform the duties and responsibilities of the position. In addition, it is preferred that Alignment Technicians possess a state inspection license. As an active position, Automotive Alignment Technicians are required to stand, walk, bend, kneel, stoop, crouch, crawl, climb, pull, reach and perform repeated and repetitive movements consistent with vehicle and tire maintenance and repair. Alignment Technicians must regularly lift and/or move items weighing over 50 pounds. What are you waiting for? APPLY NOW! Candidates can apply online at . OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995. For more information about Mavis, please visit . Mavis is an Equal Opportunity Employer Consistent with our commitment to the principle of equal employment opportunity for all individuals, we enforce a zero-tolerance policy on discrimination at Mavis. Employment decisions are made without regard to an applicant's or employee's actual or perceived race, color, religion, creed, sex, pregnancy, sexual orientation, national origin, age, ancestry, ethnicity, disability, citizenship, alienage, marital status, domestic or civil union partnership status, familial status, caregiver status, military or veteran status, transgender status, gender identity or expression, genetic information, predisposing genetic characteristic, status as a victim of domestic violence, stalking and sex offenses, or any other status protected by applicable federal, state or local laws, regulations or ordinances. Exceptions or modifications to certain job duties and/or expected schedules may be provided for an employee who needs a reasonable accommodation for: (a) a sincerely held religious belief, observance or practice that conflicts with the expected schedule for a position; or (b) an otherwise qualified individual with a disability, unless such accommodation poses an undue hardship on our business, in accordance with applicable federal, state and local laws. Additional information is available by contacting . We will endeavor to make a reasonable accommodation / modification to the known physical or mental limitations of a qualified applicant with a disability to assist in the hiring process, unless the accommodation would impose an undue hardship on the operations of our business, in accordance with applicable federal, state and local laws. If you believe you require such assistance to complete this Application for Employment or to participate in the interview process, please contact our Employee Experience team at (914) 984-2500 ext. 5631. We also will endeavor to provide reasonable accommodation for a job applicant's or an employee's sincerely held religious beliefs, observances, or practices that conflict with a work requirement unless the accommodation poses an undue hardship to our business, in accordance with applicable federal, state and local laws. If you believe you require such an accommodation, please contact our Employee Experience team at (914) 984-2500 ext. 5631. In addition, applicants may report any instances of perceived discrimination through HRConnect either by calling toll-free at 1-877-628-4755 or by sending an email to . Job Posted by ApplicantPro

If you are interested in pursuing a rewardingcareer, we invite you to review our opportunities! Job Description Summary Road Technician (Power & HVAC Road) Are you seeking an entrepreneurial, empowering workplace that allows you to: * Develop a career track * Leverage your current skills in a ch

Job Description Fresh Coat Painters - Painting Done RIGHT! Painters Wanted! Full-time/Interior and Exterior Residential plus light Commercial. Top Wages Paid. Fresh Coat is professionalizing the painting industry and has a comprehensive marketing program that provides for a steady flow of clients. The majority of work is interior residential. Regular payroll plus Workers Comp and Liability Insurance provided. Fresh Coat is a growing company with ground floor opportunities in management. Employees are rewarded for helping to grow Fresh Coat. Experience, vehicle and tools required. All employees must pass a background check. Apply By Visiting Our Website: OR Call (817) 320-3902

Job Description Entry-Level Construction Materials Engineering Technician Requisition Number: 2026-1060-02 Do you like the idea of starting your day outdoors instead of at a desk? Do you take pride in hands-on work that makes a real impact on the success of a construction project? If so, a career as a Construction Materials Engineering Technician out of our Greensboro, North Carolina office might be exactly what you're looking for. As an Entry-Level Construction Materials Engineering Technician, you will receive the training and hands-on experience of how to test particular construction materials such as soil, concrete, asphalt, aggregate and more to ensure the project is built right. You'll be in the field helping ensure that the materials used to build everything from restaurants to stadiums meet the right standards for quality and safety. Your Day-to Day: • Start with Concrete: Begin with concrete testing and sampling, then move on to other materials like soils, asphalt, and masonry., • Train as You Go: Receive on-the-job training and certification support through the American Concrete Institute (ACI) and the International Code Council (ICC)., • Work Outdoors Year-Round: Enjoy working outside in various weather conditions, with changing environments and different crews on different sites., • Testing and Reporting: Conduct and document tests on construction materials with precision. Ensure all laboratory and field equipment is well-maintained and properly calibrated. Collaborate with colleagues and work independently to ensure test results are logical, complete, and ready for review., • Inspections and Compliance: Perform inspections of construction materials according to the International Building Code (IBC) and serve as a Special Inspection agent per certifications and IBC requirements. Review project plans, record observations and test results, and use Metafield® to organize data. What You Bring: • A High School diploma/GED, • Eagerness to gain experience in construction testing/inspections of soil, concrete, masonry, and/or asphalt materials, • A valid driver's license and reliable transportation, • A certification from any of the following is a plus:, • American Concrete Institute (ACI): Field Testing Grade I, Strength Testing Technician, Laboratory Technician, • A strong ability to communicate effectively in English (speaking, reading, and writing), • A basic understanding of math concepts related to weight, volume, pressure, and units of measurement Working Conditions and Physical Demands: Perform the physical demands of the position with the use of company-provide Personal Protective Equipment such as: • Working outdoors the majority of the time in varying weather conditions, • Walking over rough, uneven terrain and standing for potentially up to 12+ hours a day, • Routinely lifting and carrying 40-50lbs, (field/laboratory samples and equipment), • Maneuvering field equipment safely, such as a loaded wheelbarrow, on uneven ground around active construction sites, • Working outside normal business hours, including some weekends, • Traveling out of town and overnight based on project needs We Are S&ME: At S&ME, we're committed to your growth, professionally and personally. With over 50 years of experience delivering innovative solutions in geotechnical, civil, environmental, and construction materials engineering, we've built a strong foundation for long-term careers. Our team of 1,000+ employee-owners across 10+ states works together to create meaningful impact for our clients and communities. When you join S&ME, you become part of a collaborative, honest, and people-focused culture that invests in your success. We offer exciting project opportunities, ongoing training, and a comprehensive benefits package to support you and your family. This is more than a job; it's a place to grow, thrive, and build a future. Here's what you can look forward to: • Medical, Dental & Vision Plans with HSA and FSA options, • Wellness Program - $50 off per month on your 2027 premiums!, • Pet Insurance, • Term Life & Long-Term Care Coverage - available Spring 2026, • 100% Employee Stock Ownership Plan (ESOP) with a 5% company contribution, • 401(k) Retirement Plan, • Paid Holidays and Paid Time Off (PTO) - with rollover options, • Paid Maternity & Paternity Leave, • Mentorship & Career Development Programs, • Credential Incentive Program - get rewarded for advancing your skills, • Tuition Reimbursement, • Employee Recognition Program, • Company Vehicle & Fuel Card - for project-based roles, • $2,000 Employee Referral Bonuses - and more! If you are seeking a challenging and rewarding career with a firm committed to our employees and providing quality service to our clients, join our team! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. Job Posted by ApplicantPro

Bachelor's Degree in Engineering, Construction Management, or Building Construction from an accredited university, preferred; a combination of on-the-job experience and/or formal education may be substituted for the degree. Thomas Construction Group is an innovative, full-service general contractor

Job Description Automotive Technician A Level (Diagnostics WIZARD) Location: Wilmington, NC Schedule: Monday – Friday | 8:00 AM – 5:00 PM | No Weekends Pay Plan: Flat Rate – $40 to $50 per hour (based on experience) Guarantee: 60-Day Production Guarantee (40 hours/week month one, 30 hours/week month two) Expected Hours Flagged: 40+ per week Earning Potential: $100,000 – $175,000+ annually depending on productivity Pay Schedule: Bi-weekly Relocation Assistance: Tool relocation assistance available Position Summary Promotive is hiring an experienced A Level / Diagnostics Wizard Automotive Technician for a well-established independent repair shop in Wilmington, NC. This is a Monday–Friday opportunity with no weekends, working in a clean, air-conditioned facility with a strong team culture and leadership that truly supports technicians. This shop has built a reputation for high-quality diagnostics, preventative maintenance, and honest repairs. If you're a technician who enjoys solving complex vehicle issues, performing accurate diagnostics, and turning solid hours in a supportive environment, this is an opportunity to build a long-term career with a team that values your skills. Key Responsibilities * Perform advanced diagnostics and troubleshooting on drivability, electrical, and engine performance concerns * Diagnose and repair domestic, Asian, and European vehicles * Complete repairs including brakes, suspension, steering, cooling systems, electrical systems, and engine performance work * Use professional diagnostic tools such as Autel and Snap-On scan tools * Document findings and recommendations using digital vehicle inspections (DVI) * Collaborate with service advisors and parts staff to ensure efficient workflow and accurate repair orders * Maintain a clean, organized, and professional work environment * Perform quality repairs that prioritize safety, reliability, and long-term vehicle performance Qualifications * 5+ years of experience as an automotive technician * Strong diagnostic and troubleshooting ability * Experience working in an independent repair shop environment preferred * Ability to diagnose vehicles efficiently and turn consistent hours * ASE certifications preferred but not required * Self-starter with strong work ethic and attention to detail * Valid driver's license required * Must be able to pass background check and drug screen A-Level technicians typically specialize in diagnostics and complex repairs while mentoring and supporting other technicians when needed. Compensation & Benefits * Flat Rate Pay: $40 – $50 per flagged hour * Earning Potential: $100K – $175K+ annually depending on productivity * 60-Day Production Guarantee to help you ramp up * Health Insurance (50% employer-paid for employee) * Dental Insurance * Vision Insurance * $25,000 Life Insurance policy * Health Savings Account (HSA) * Paid Time Off * Paid Holidays (6 major holidays) * Paid Sick Days * Paid Training and certifications * Professional development assistance * Employee discounts * Tool relocation assistance About the Shop This independent repair shop has built a strong reputation in the Wilmington community through quality work, transparency, and a technician-first culture. What makes this shop stand out: * 16 years serving the local community * 4.9-star Google rating with 400+ reviews * Clean, climate-controlled shop (AC & heat) * Five bays and five lifts * Modern equipment including Autel and Snap-On scan tools * Tekmetric shop management system and digital inspections * Mixed vehicle fleet: Domestic, Asian, and European * Average 50–75 vehicles per week Plus — the shop is just minutes from the beach, making it a great place to live and work. If you're an experienced automotive technician who enjoys solving complex problems, working with a supportive team, and earning top-tier income without weekend work — we'd love to connect. Apply today and take the next step with one of Wilmington's most respected independent repair teams.

Job DescriptionBenefits: • License reimbursement, • 401(k), • Bonus based on performance, • Competitive salary, • Opportunity for advancement, • Paid time off Outside of work, I live on the beach and a horse farm, where my love for horses keeps me busy. Family is everything to me Im one of nine children and a proud grandparent to eight grandchildren. Our office is also pet-friendly, and were big supporters of local police, fire departments, and veterans organizations. We offer paid vacation, holidays off, bonuses, and a 401k plan. We also reimburse licensing costs and take pride in providing some of the best hands-on training available for new team members to succeed long-term. Our office culture is organized, supportive, and built on mutual respect. With a structured environment and a highly experienced team, everyone plays an important role in helping one another achieve success. Were looking for someone who is organized, driven, and motivated someone whos ready to learn, grow, and become part of a close, dependable team. ROLE DESCRIPTION: Rob Cutting - State Farm Agent is a leading insurance agency dedicated to providing exceptional service to our customers. We are currently seeking a dynamic individual to join our team as a Receptionist - State Farm Agent Team Member. Our ideal candidate is highly organized, detail-oriented, and committed to contributing to a positive and productive workplace. If you thrive in a supportive role and are eager to learn and grow within the insurance industry, we invite you to apply and become a valued member of our team. RESPONSIBILITIES: • Greet customers warmly in person and over the phone, directing them to the appropriate team members., • Manage appointment scheduling and office communications., • Assist in handling incoming inquiries and maintaining customer records., • Engage in conversations with prospective and existing customers, identifying opportunities to offer insurance options., • Provide excellent customer service and follow up on customers needs., • Support the team with various administrative tasks and projects.QUALIFICATIONS:, • Previous experience in a receptionist or customer service role., • Communication and interpersonal skills., • Organizational and multitasking abilities., • Comfortable with engaging in sales conversations., • Basic computer skills, including Microsoft Office and CRM systems.

Job Description We're Hiring! Looking to add to our valued team of skilled plumbers. Our work consists of Custom Residential and Light Commercial Plumbing primarily across Pender, New Hanover and Brunswick Counties. Whether you're a seasoned pro or new to construction we want to hear from you. We're a small, family oriented company who values quality work and our reputation in the community. We offer a competitive benefits package, consistent 40hr. schedule and challenging projects. If you chose a life of doing hard work worth doing and want to further your skills, come see us. Job Type: Full-time Pay: $16.00 - $30.00 per hour Expected hours: 40 per week Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time offSchedule:, • 8 hour shift, • Day shiftSupplemental pay types:, • Bonus opportunitiesExperience:, • Plumbing: 3 years (Required)License/Certification:, • Driver's License (Required)Ability to Relocate:, • Wilmington, NC 28411: Relocate before starting work (Required)Work Location: In person

Job Description At ACI we build our company and our culture not by counting people, but by making our people count! $0.00 COST FOR MEDICAL, DENTAL, SHORT TERM DISABILITY & LIFE INSURANCE (EMPLOYEE ONLY) COVERAGE! Atlantic Constructors is seeking dynamic, motivated, career minded individuals to join our expanding team! Atlantic Constructors has been recognized as an industry leader in the Mid-Atlantic Region for over 50 years. Benefits: • Medical Insurance Plan ($0.00 Employee-Only), • Dental Insurance Plan ($0.00 Employee-Only), • Short-Term Disability Plan ($0.00 Employee-Only), • Life Insurance Plan ($0.00 Employee-Only), • Vision Insurance Plan, • 401(K) Retirement Plan with Generous Company Matching, • Health Savings Plan with Generous Company Matching Summary/Objective: Responsible for providing a solution based sales efforts, actualizing account management strategies, sales planning, sales pipeline, and manage sales activity. Essential Functions: • Develop positive, successful relationships with customers, owners and property management decision makers, • Enhance business development through cold calling, prospecting, and heavy networking, • Successfully close deals to promote business development and growth, • Sell heating and cooling system preventive maintenance packages and service agreements to commercial and industrial clients, • Communicate effectively with both internal and external customers, • Ability to handle workload under deadlines in a fast paced dynamic work environment, • Enhance corporate brand among commercial customers, • Manage customer accounts, relationships and exceed customer expectations to ensure secured sales performance, • Provide weekly sales forecasts, • Increase market penetration in local business by developing and securing new relationships/customers, • Facilitate a team selling approach and ensures support resources are in place to develop business, • Analyze the market and current business performance, • Partner with Service Sales team, to maximize local territory account management consistent with ACI's strategic direction, • Provide customer base with viable solutions to decrease their overall operating expenses through system efficiency and energy conservation, • Evaluate local performance in customer satisfaction and provide leadership for performance enhancement and proactive resolution of issues Required: • 2+ plus years of sales experience; or equivalent combination of education and experience (preferably in a construction environment), • Proficient with MS Office and CRM systems, • Knowledge of Commercial HVAC/mechanical and energy conservation, • Must be able to multi-task, work with minimal supervision, follow written and oral instructions, show attention to detail and demonstrate problem-solving skills, • Must be able to pass post-offer pre-employment drug screen, and may be required to satisfactorily complete additional background checks as required (i.e. DMV, criminal history), • Must adhere to all company policy and procedures Work Environment: • Works in a professional office environment and routinely uses standard office equipment, • Prior military experience, • HS diploma or GED equivalent

Entry-Level Construction Materials Engineering Technician Requisition Number: 2026-1060-02 Do you like the idea of starting your day outdoors instead of at a desk? Do you take pride in hands-on work that makes a real impact on the success of a construction project? If so, a career as a Constructio

Job DescriptionBenefits: • 401(k) matching, • Free uniforms Benefits: • Company vehicle provided, • Industry-leading training and development, • Competitive pay based on experience, • Opportunities for advancement, • Supportive team environment We are currently hiring a dependable Generator Mechanic / Service Technician to join our growing service team. This is a field-based technician role ideal for candidates with experience in small engine repair, generator service, electrical troubleshooting, or mechanical repair. If you enjoy diagnosing equipment, solving technical problems, and working independently in the field, this is an excellent opportunity to build a career in the backup power and energy services industry. Position Overview The Generator Mechanic / Service Technician is responsible for diagnosing, servicing, and repairing residential standby generators and automatic transfer switch (ATS) systems. This role requires strong mechanical and electrical troubleshooting skills along with the ability to deliver excellent customer service while working in residential environments. This position combines field service work, equipment diagnostics, preventative maintenance, and electrical troubleshooting. Responsibilities • Travel to residential job sites using a company-provided service vehicle, • Perform diagnostics, preventative maintenance, and repairs on whole-home standby generators, • Troubleshoot mechanical and electrical components, including automatic transfer switches (ATS), • Read and interpret wiring diagrams, schematics, and service manuals, • Communicate clearly with customers regarding services performed and repair recommendations, • Document service work and maintenance reports in company service software, • Follow safety procedures when working around electrical systems and equipment, • Assist with emergency service calls during storms or power outages when required, • Maintain tools, equipment, and service vehicle in good working conditionWhat Were Looking For, • 1+ years of experience in generator repair, small engine repair, electrical troubleshooting, or mechanical service work, • Strong mechanical aptitude and diagnostic skills, • Ability to read electrical schematics and wiring diagrams, • Strong customer service and communication skills, • Ability to work independently in a field service environment, • High school diploma or equivalent required, • Valid drivers license with a clean driving record, • Ability to lift equipment, climb ladders, and work outdoorsExperience with residential standby generators or ATS systems is a strong plus. Schedule • Monday through Friday, • 7:30 AM 4:30 PM, • Occasional flexibility required during emergency service callsWhy Join Generator Supercenter?, • Work with the #1 standby generator provider in North America, • Stable, growing industry focused on energy reliability and security, • Company-provided service vehicle, tools, and equipment, • Ongoing technical training and career development, • Opportunities to grow into senior technician or leadership rolesJoin a team dedicated to helping homeowners maintain reliable power and peace of mind. Apply today to start a rewarding career in generator repair and renewable energy service!

Job DescriptionTemporary Seasonal Landscaping/General Maintenance for ILM Airport Monday through Friday Hours: 8am to 4:30pm Requirements • Valid NC Driver's License, • Pass Drug Test, • Complete all onboarding paperwork with Roebuck Staffing BenefitsN/A