Trabajos construction inspector en Austin, TexasCrear alertas

Job Description POSITION DESCRIPTION Job Title: Maintenance Coordinator Supervisor: Executive Director or Maintenance Director FLSA Status: Hourly, non-exempt Date Approved: September 2025 OVERALL JOB PURPOSE Assures preventative maintenance of Community, including building exterior and interior, grounds, walkways, driveways, and parking lot to ensure the Community is safe, attractive, and operating within budget. May provide back up support for Community Driver to safely transport residents in Community vehicle. MINIMUM JOB QUALIFICATIONS AND REQUIREMENTS • Must be 21 years of age, • High school diploma or equivalent, • Minimum of two (2) years’ verifiable hands-on maintenance experience in areas such as plumbing, electrical, carpentry, HVAC, etc. is necessary, • Ability to perform and/or coordinate emergency building repairs at the Communities; includes contacting and contracting subcontractors to complete repairs, • Provide training for Executive Director in the operation of emergency systems, • Experience in the safe handling and use of power tools normally used in construction, maintenance, and landscaping, • A valid driver’s license and good driving record are required along with proof of auto insurance. May be required to assume the duties and responsibilities of the Community Driver position as needed, • Ability to lift up to one hundred (100) pounds, • Demonstrated ability to communicate effectively and positively (in English), both verbally and in writing, with residents and staff, • Meets state health related requirements (as applicable for position), • Ability to work in a team setting and be a positive team player, • Maintain a positive, respectful, and professional approach with coworkers and residents, • Possess excellent customer service and organizational skills, • Ability to work under time constraints and meet department deadlines, • Satisfactorily pass company’s and state regulated criminal record clearance, health screening and TB clearance (if applicable) ESSENTIAL JOB DUTIES AND RESPONSIBILITIES • Assures maintenance and repair of Community interior, exterior, and equipment, including resident apartments, by performing or supervising maintenance tasks or facilitating such performance by outside maintenance services personnel, as directed by Executive Director, • Inspects Community and monitors Maintenance log daily to promptly address maintenance concerns, • Implements and assures adherence to Community maintenance programs such as HVAC-related, carpet-related, mold-related, etc., • Meets deadlines in repairs to Community equipment and performs various other Community and resident maintenance tasks or facilitates repair by outside maintenance services personnel as directed by Executive Director, • Orders maintenance equipment, parts, supplies, and maintenance services from outside personnel, as needed following company procedures, • Assists in monitoring capital improvement projects, • Recommends maintenance repairs and replacements to Executive Director, Maintenance Director, or Regional Director of Maintenance, • Assures safe, orderly, and functional condition of mechanical room, • Assures all maintenance equipment and supplies are stored appropriately and safely, • Performs emergency maintenance services at Community on an on-call basis, • Assists housekeeping employees in deep cleaning of resident apartments and common areas with attention to detail and according to schedule, • Maintain company standards with an eye for detail on all apartment turns, • Performs duties associated with Community emergency preparation and response systems, as directed by Executive Director, Maintenance Director, or Regional Director of Maintenance, • Maintains Hazardous Chemical Inventory and Safety Data Sheets according to Community Hazard Communication Program and local, county, state, and federal guidelines, • Review SDS as requested for potential exposure to hazardous chemicals and take necessary precautions, • Maintain positive communication with local fire marshal, building inspector, state elevator inspector, and any other jurisdictions governing the community, • Conducts certain components of new employee orientation and education and training classes for employees as directed by Executive Director or Maintenance Director, • Performs quality assurance audits as assigned by Executive Director or Maintenance Director, • Effectively interacts with any Regional or Support Office maintenance services consultants and contracted services personnel, • Participate in monthly Safety Committee meetings, • Perform other duties as assigned by the Maintenance Director or Executive Director OTHER JOB DUTIES AND RESPONSIBILITIES • Perform all work assigned for the agreed-upon salary, accepting no additional payment or non-perishable gifts from residents, vendors, Community management, or others, • Meet the assigned work requirements of the job. Regular attendance is required, • Serve as a role model for all employees by displaying a responsible, cooperative, and positive attitude, • Represent the Community in a professional, courteous, and friendly manner, • Adhere to dress/appearance code. Changes in attire may be dictated by special occasion or weather conditions. If you have questions, check with your supervisor, • Adhere to company policies, procedures, and standards, • Promote resident advocacy and demonstrate excellent customer service at all times, • Follow specified procedures as outlined in the Safety Manual regarding the handling of contaminated material encountered in accidents or injuries on the Community premises, • Attend education and training classes as necessary to fulfill state applicable to the position, • Maintain personnel, resident, and business proprietary and/or confidential matters/material in strict confidence with management of the company (and/or other company staff as needed), • This position is considered a universal employee worker and will be crossed trained in other positions as directed by the supervisor, • Maintains certifications as necessary such as First Aid, to fulfill state regulations (if applicable), • This position has no supervisory responsibilities Equal Employment Opportunity Statement: Sunshine Retirement Living (The Company) proudly provides equal employment opportunities to all employees and applicants. We celebrate diversity and are committed to creating an inclusive environment where residents, employees, and families feel respected and valued, regardless of race, color, religion, sex, national origin, age, disability, or any other protected status. Salary-History Statement: Sunshine Retirement Living (The Company) is committed to fair and equitable pay practices. We do not request or consider an applicant’s past or current salary when making compensation decisions, in compliance with applicable salary history and pay equity laws. PHYSICAL REQUIREMENTS Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 20% or less 20% to 40% 40% to 60% 60% to 80% 80% to 100% Stand X Walk X Sit X Pushing, pulling and/or reaching X Grasping and fine manipulation X Climb or balance X Stoop, kneel, crouch, or crawl

• Role: Senior Project Manager, • Location: Remote (Seattle Area), • Type: Direct Hire / Permanent, • Duration: Full-time Work You Will Do: • Lead complex Energy Services Performance Contracting (ESPC) & Design-Build construction projects ($5M+) across WA State., • Manage full project lifecycles—from pre-construction and subcontracts to Procore docs, budgeting, and final closeout., • Oversee job site safety (OSHA/WISHA), critical path schedules in MS Project, and client/inspector relations. The Successful Candidate Will Possess: • Proven track record executing multi-million dollar S&C & MEP renovations in public-sector (MUSH) markets., • Strong leadership in cost control, change management, and building long-term client relationships., • Valid driver's license and excellent technical communication skills. Qualifications: • Bachelor's in Construction Management, Engineering, or equivalent experience., • 7+ years of Construction Project Management experience., • OSHA 30 certification (minimum). Preferred Knowledge: • PMP, CEM, CMVP, or LEED AP certifications., • Familiarity with HVAC, controls, renewables (PV/BESS), and IPMVP savings verification.

Job Description This is a part time, 1099 position. Job duties include: Looking at newly built homes from a customer's perspective to identify defects in workmanship, quality, completeness, consistency, and professionalism. (Reviews take on average 1 to 1.5 hours to complete) Each review is meant to evaluate the quality of the finished construction. Driving to construction sites and conducting quality reviews on the day it is scheduled. Work may be started anytime during the day between 8 am to 3:30 pm. Reports are submitted on site electronically upon completion of review and no later than 5PM. Entering review results online using your own tablet while on the job site. Training will be provided on how to enter a Quality Review Report in the report database. Reviewers are not required to walk on roofs or in attics. No tools, lights or ladders are used in the review. Residential construction experience is preferred but not required. Required equipment: • Tablet (Cellular enabled from 2020 model or newer), • Blue painter's tape, • Hard hat (Required to be worn while on the job site.), • Access to email while out in the field either though a tablet or phone Preferred background experience: • General Contractor/Superintendent/Project Manager, • Familiar with punch list writing or general QC/QA principles., • Home Renovation or Remodeling, • Familiar with fit and finish reviews or warranty walk through with homeowners Ideal candidates will be: • Detail oriented - able to be thorough and consistent, • Able to recognize defects in a home from a buyer's viewpoint., • Reliable - work must be completed on the scheduled day between 8am - 5pm, • Principled - able to work unsupervised while providing thoroughness and consistency in each home, • Able to connect to the internet via Wi-Fi, • Have experience working with a mobile device and familiar on how to solve minor technical issues that could occur while out in the field., • Able to drive to sites around the area. (Drive time is not compensated). Management will group work orders whenever possible minimizing drive time between stops. This is a part-time position. Reviewers must be available 4-5 days Monday thru Friday to work partial and sometimes full days. Days off must be given to the scheduler a week or more in advance (except in the case of emergencies). Compensation: Paid per review completed. Pay rate ranges from $75-$90 per new review. Introductory period lasts for 30 -60 days, and pay is $65-$75 per review during that timeframe. There is a $10/house raise when introductory period ends. No phone calls please \nCompany Description A 2M Quality review is a thorough look at all of the finish details of a new home by a professional third party. While a county building inspection is looking at construction passing minimum building code, a 2M Quality review makes sure the home's workmanship is top-notch. For example, a building inspector will make sure a light works; a 2M Quality reviewer will make sure the light is centered above the sink, is installed level and tight to the wall, and that the light fixture is free from scratches or damage. A 2M Quality review is a thorough look at all of the finish details of a new home by a professional third party. While a county building inspection is looking at construction passing minimum building code, a 2M Quality review makes sure the home's workmanship is top-notch. For example, a building inspector will make sure a light works; a 2M Quality reviewer will make sure the light is centered above the sink, is installed level and tight to the wall, and that the light fixture is free from scratches or damage.

Tetra Tech is adding experienced Site Inspectors to our Disaster Recovery team to support current and future disaster recovery operations across the United States. This is an on-call, as-needed position supporting disaster recovery programs following hurricanes, floods, tornadoes, wildfires, earthquakes, and other federally declared disasters. Assignments may be performed in the field, remotely, or through a hybrid arrangement depending on client and project requirements. Join Tetra Tech to make a real difference. Our work leverages cutting-edge technologies, advanced analytics, and the expertise of world-class scientists and engineers to create meaningful change around the world. Discover your full potential - join us to advance your career while leaving a lasting legacy. As a Site Inspector, you will support disaster recovery efforts by documenting disaster-related damages to public infrastructure and facilities. Your inspections and documentation will help support funding determinations, project formulation, damage assessments, and recovery planning efforts. You will work with applicants, facility representatives, engineers, architects, project managers, and recovery specialists to accurately capture damage information, document site conditions, and support the development of recovery projects. Recovery Cadre employees are engaged on an as-needed basis and may be offered assignments based on qualifications, availability, project requirements, contract awards, client needs, and disaster activity. The following duties are considered essential to the role. Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions: Site Inspections and Damage Assessments Conduct field and desktop-based inspections of facilities and infrastructure impacted by disasters. Evaluate and document disaster-related damages to public buildings, roads, bridges, utilities, parks, drainage systems, and other facilities. Capture photographs, measurements, observations, and site conditions necessary to support recovery funding programs. Document building and site-specific attributes using data collection applications and technology platforms. Verify reported damages and support validation of project information. Conduct virtual inspections using photographs, videos, engineering reports, GIS tools, and other available documentation when field deployment is not required. Data Collection and Documentation Collect, organize, and upload inspection data using cloud-based and mobile data collection platforms. Maintain accurate inspection records and supporting documentation. Develop clear and comprehensive site inspection reports. Review inspection reports for completeness, accuracy, and consistency. Maintain project documentation in accordance with client, program, and quality control requirements. Track assigned inspections and report completion status through designated management systems. Applicant and Stakeholder Coordination Coordinate site visits with facility representatives, local government staff, nonprofit organizations, and other stakeholders. Communicate inspection requirements and scheduling needs. Explain inspection processes and documentation requirements to applicants. Maintain professionalism and customer service throughout project delivery. Facilitate resolution of issues encountered during inspections and data collection activities. Recovery Program Support Support FEMA Public Assistance and other disaster recovery programs through inspection and documentation activities. Assist project teams in understanding facility conditions and documented damages. Collaborate with engineers, cost estimators, architects, environmental specialists, and grant management professionals. Provide information necessary to support project formulation, eligibility reviews, and recovery planning activities. Maintain awareness of disaster recovery program requirements and inspection protocols. Safety and Professional Standards Conduct all activities in accordance with Tetra Tech quality standards and safety requirements. Comply with client, program, and regulatory requirements. Work safely in varied environments, including construction sites, damaged facilities, and disaster-affected areas. Participate in training and continuous professional development opportunities. Maintain awareness of construction practices, building systems, and facility repair methods. Required Qualifications: Minimum of 2 years of experience in building inspection, construction, facility assessment, infrastructure assessment, insurance inspections, damage assessments, engineering support, architecture, construction management, or a related field. Experience collecting, documenting, and organizing field-based data. Strong organizational, analytical, and problem-solving skills. Strong verbal and written communication skills. Proficiency with Microsoft Office Suite, mobile data collection applications, cloud-based information systems, and smartphone and tablet technology. Ability to work independently and as part of a multidisciplinary team. Ability to manage multiple assignments and changing priorities. Ability and willingness to travel on short notice as needed. Valid driver's license and ability to pass a motor vehicle records check. Preferred Qualifications: Bachelor's degree in Construction Management, Engineering, Architecture, Emergency Management, Building Sciences, Environmental Sciences, Logistics, Public Administration, or a related field. Prior FEMA Public Assistance, FEMA Individual Assistance, HUD, CDBG-DR, or other disaster recovery program experience. Experience conducting post-disaster damage assessments. Experience performing facility condition assessments or construction inspections. Knowledge of public infrastructure, facility systems, and construction practices. Experience working with state, local, tribal, or territorial governments. GIS, drone, or geospatial data collection experience. Previous deployment experience supporting disaster recovery operations. Physical Requirements: Ability to perform site inspections that may require prolonged periods of standing and walking through facilities, construction environments, and disaster-affected areas. Ability to navigate varied site conditions while collecting photographs, measurements, observations, and other inspection data. Ability to use computers, smartphones, tablets, and mobile data collection technology for extended periods during field and remote assignments. Ability to travel to disaster-affected communities and client locations on short notice as assignments require. Work Environment / Environmental Factors: Work may be performed in the field, remotely, or through a hybrid arrangement depending on client and project requirements. Field assignments may involve damaged facilities, construction environments, disaster-affected communities, and outdoor conditions with variable weather. Assignments may require work in fast-paced environments with changing priorities and periods of high-intensity workload during active disaster recovery operations. Work requires collaboration with facility representatives, government staff, nonprofit organizations, clients, and geographically dispersed multidisciplinary project teams. Additional Information: This is an on-call, as-needed Recovery Cadre position. Work assignments are not guaranteed and depend on disaster declarations, contract awards, client needs, recovery program activations, qualifications, and availability. Assignments may include field deployments, virtual damage assessments, desktop reviews, or hybrid project support. Potential deployment on short notice may be required during major disasters. Site visits may be required at damaged facilities and disaster-affected communities. Flexible assignment schedules are based on recovery operations, and evening or weekend work may be required during surge events. Acceptance of assignments is voluntary, and periods of inactivity between assignments may occur. Life at Tetra Tech: The perks of working at Tetra Tech include: Comprehensive and market-competitive benefits. Merit-based financial rewards. Flexibility and company-wide commitment to work/life balance. Collaborative team atmosphere that values the contributions of all employees. Learning and development opportunities for ongoing professional growth. About Tetra Tech: Tetra Tech is the leader in water, environment, and sustainable infrastructure, providing high-end consulting and engineering services for projects worldwide. With 30,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. Tetra Tech is proud to be an Equal Opportunity Employer. All qualified candidates will be considered without regard to race, color, religion, national origin, age, disability, sex, marital or familial status, status as a protected veteran, or any other characteristic protected by law. Tetra Tech is a VEVRAA federal contractor and we request priority referral of veterans. We invite applications from all interested parties.

As a Construction Inspector supporting land development and municipal projects, you will monitor contractor activities on civil construction sites, including pipeline construction, water and wastewater facilities, detention and water quality ponds, utility testing, and interfacing with contractors, engineers, owners, and others with roles in the project. You will inspect materials and workmanship to ensure compliance with project plans, specifications, and contract requirements. This is a hybrid field-and-office role that requires regular time both on active construction sites and in the office. Field work includes inspecting construction operations, documenting progress, and performing site visits to verify compliance with contract documents and quality standards. In-office time supports project planning, coordination, documentation, and timely communication with project teams, helping connect field observations with informed decisions, schedule management, and successful project delivery. The role requires demonstrated experience in civil construction projects, with a strong understanding of standard construction practices, water, wastewater and drainage systems, as well as local and statewide codes and specifications. • Inspect, observe, document, and verify work in progress by the construction contractor to ensure compliance with project schedule, contract documents, and plans., • Monitor the installation of water, reclaimed water, and wastewater infrastructure, including pipelines, force mains, valves, manholes, pump stations, lift stations, and related utility improvements., • Coordinate inspection activities with contractor superintendents, project engineers, utility staff, and agency representatives., • Identify non-conforming work and communicate observations through proper documentation and reporting procedures., • Support project closeout activities, including punch lists, record documentation, and development of final estimate packages., • Processing of pay applications submitted by contractors each month., • Draft inspection reports for site visits documenting contractor activity., • Attend and contribute to in-office meetings with project managers, engineers, and other project team members to support project planning, schedule development and updates, review upcoming work, identify coordination needs, and communicate field conditions that may affect project delivery., • Complete in-office project support activities, including reviewing plans, specifications, schedules, reports, and contractor submittals; maintaining project records; following up on meeting action items; and preparing for upcoming inspections and construction activities., • Perform and document field testing activities, including pressure testing, leakage testing, compaction testing, and other project-specific acceptance testing requirements., • Direct coordination between contractors and engineering staff to ensure engineers are informed of project status and assist in any field modifications that need to be made., • Conducting drone flights of project sites for engineering staff., • HS diploma (BS in Civil Engineering or Construction Management preferred), • 2 + years of construction inspection experience., • OSHA 10 or 30 (preferred), • FAA pt.107 license (preferred), • Ability to read, interpret, and apply engineering plans, specifications, and contract documents., • Experience inspecting water, wastewater, utility, municipal infrastructure, or public works construction projects., • Must have a valid driver's license with a good driving record., • Strong attention to detail and the ability to work independently in a field environment., • Familiarity with Bluebeam or similar software., • Proficiency in Microsoft Office applications., • This field job primarily operates in outdoor work environments that may include exposure to inclement weather, heat, humidity, noise, hazard, atmospheric conditions, and bodies of water, depending on project requirements., • While performing the duties of this job, physical demands of the employee may include frequent talking, hearing, standing, moving, walking, stooping, kneeling, crouching, crawling, reaching, handling, grasping, feeling, balancing, coordination, and occasional sitting or operating a company vehicle. This job may require lifting, carrying, pushing, and pulling up to 35 lbs. What Benefits You'll Enjoy: We invest in us. Because our team members go above, below, and beyond the surface to care for our communities (inside and out), we do our best to take care of you by providing a comprehensive benefits package! Eligibility for some of the benefits outlined below is based on full-time work status; part-time and contingent positions are only eligible based on hours worked. If you have questions, contact careers@consoreng.com. • Career Growth & Development Tuition reimbursement program, paid professional training, major license achievement bonus, extensive on-demand learning center, and paid professional memberships., • Work-Life Alignment Industry-competitive PTO, seven paid holidays and two floating holidays, flexible work schedules, paid parental leave, and eligibility for hybrid and remote work options for some employees based on role responsibilities., • Wellness Medical, dental and vision insurance, employee assistance program, fitness and wellness reimbursement, and HSA and FSA options., • Life Employer-paid STD and LTD, employer-paid term life insurance, and retirement 401(k) with company match., • Community Quarterly social events, paid group volunteering events, and employee networks and groups. How Your Career Will Grow: We know career growth is not always linear or streamlinedit's often dynamic. You may want to explore a management track, try a new technical track, or move laterally to reposition your skills and talents. No matter what level you join us at or how you want to shape your career, we want Consor to be a place where you can learn and grow. Why You'll Love Consor: You'll experience a culture where we share in our successes and support one another through challenges. Here, there are countless opportunities to explore your career path by working on projects that help you expand your potential and take your career to new heights! Join our diverse team of experts who live and work alongside client partners, providing thoughtful solutions to create inspiring communities together. Click here to learn more about Consor. Consor's Commitment to Equal Opportunity in the Workplace Consor welcomes and celebrates equality and diversity in the workplace. We are committed to fostering an environment in which employees and prospective employees are treated with dignity and respect, and where the uniqueness, perspectives, and experiences of individuals are valued. Consor is an equal opportunity employer and maintains employment practices designed to provide equal employment and development opportunities for all employees and applicants, in accordance with applicable local, state, and federal laws. Employment decisions are made without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local law. Consor also maintains an affirmative action program across its offices and worksites. If you need more information or special assistance for persons with disabilities or limited English proficiency, contact Human Resources at (786) 275-7370. Persons with hearing and speech impairments can contact Consor by using the Virginia Relay Service, a toll-free telecommunication device for the deaf (TDD). Call 711 for TTY/TDD. If any applicant believes they have been discriminated against or desires further information or assistance, contact us at (786) 275-7370. Notices: The above job description is intended to relay a general sense of the position's responsibilities and expectations. It does not describe all tasks that may be assigned. As business demands change, the essential functions of this position may also change. The position requires the successful completion of applicable pre-employment substance screening and background checks. At Consor, we're committed to recruiting teammates ready to expand their potential. To safeguard candidates, we use only legitimate recruitment practices. Initial outreach is conducted through official Consor email addresses or LinkedIn messaging; be suspicious of any inconsistencies. We do not request personal data, sensitive information or banking details during the application process. Interviews are conducted via phone, in person, or through Microsoft Teamsnever through messaging apps or other calling services. All job offers are merit-based, delivered verbally, and followed up by written confirmation. If personal information is required to initiate the hiring process, it will be collected through secure, authorized channels. If ever in doubt, contact careers@consoreng.com.

Any of the following inspector certifications (preferred not required): Journeyman License, ICC, IAMPMO CPI, ASQ Certified Quality Inspector (CQI), Certified Quality Auditor (CQA), ASSE Backflow Prevention Certification. Any quality experience and certifications associated with other disciplines (su

RS&H is currently looking for a construction inspector to join our team in Austin, TX. You will be outside in the elements - rain or shine coordinating with contractors and sub-contractors on active heavy civil transportation construction sites. You will monitor progress as well as inspect materials to ensure compliance with plans and specifications, review contract documents to ensure compliance, and you may perform sampling and field testing of component materials and completed work. At the end of every day, you'll create a daily log of everything that happened to report these details to our client. Requirements Here's what you need to be successful: • You have a high school diploma or equivalent and six months of experience. You don't need a particular degree or extensive experience in heavy civil transportation construction. We can teach you most of what you need to know, but you must be able to read construction plans and obtain any materials sampling and testing certifications, as required by the project's scope of work. Additionally, you will need a valid driver's license with a good driving record, as you will be assigned a company truck., • You enjoy working with people. You'll work alone some days, but other days, you'll talk to clients, contractors, and subcontractors throughout your day. You'll earn trust by effectively communicating details and confidently reporting test results or findings., • You like variety. You want to work outside and easily adapt to different situations. You'll oversee your assigned project from start to finish, rain or shine, in the sun or snow, and often in unpredictable weather conditions. You like a job where you will be physically active and don't mind getting your boots dirty. You could be working a day or night shift on a rural highway project or a construction site in a more urban area., • You are flexible. Some days, your office will be your assigned company truck and others, you'll be working from the project site trailer., • You pay close attention to detail, especially numbers. You'll take measurements and complete calculations to ensure that specifications are followed. You notice details that must be addressed, like when a truck arrives with unapproved or unacceptable materials or when plans or specifications aren't followed. You will methodically record these details in a daily log, which becomes part of the client's project records. You're someone who triple-checks your work., • You like to learn. We'll first provide training and onsite supervision to help you feel confident on your own. Then, you will take additional training and certification classes as you grow in your role. Candidates must be legally authorized to work in the United States on a permanent basis. This position is not eligible for visa sponsorship or visa transfer. If this sounds like the role for you and you're ready to join an amazing team, please apply. Benefits • Paid Vacation, Personal Time Off, and Holiday Pay, • 401(k) with Company Match, • Medical, Dental, and Vision Insurance, • Certification and Licensure Support, • 100% Employee Owned Company!, • Career Advancement Opportunities, • Pet Insurance, • Cellphone Stipend, • Company Vehicle, • And much more! An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Please view Equal Employment Opportunity Posters provided by OFCCP here. Please note: no agency representation or submissions will be recognized for this vacancy. Candidates should apply directly to this role to be considered. It is the responsibility of all third-party recruiting and employment agencies to know and adhere to our recruiting policy.

C & L Inspection was built on a mission to be the most trusted US Services Company delivering top-notch performance with uncompromising integrity. This way of thinking has set us above the competition. We are looking for knowledgeable, safety minded people to join our team as we grow. Location: Austin, TX Level 1 Key Responsibilities: Perform inspections on pipelines to assess their structural integrity, safety, and compliance with industry regulations. Prepare detailed inspection reports outlining findings, recommendations, and necessary repairs. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications: Minimum of 1 year of experience in pipeline inspection or a related field. Strong understanding of pipeline construction, maintenance, and repair processes. Level 2 Key Responsibilities: Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Conduct inspections of pipelines, focusing on line extensions and rebuild services. Qualifications: Minimum of 2-4 years of experience in pipeline inspection, with a focus on line extensions and rebuild services. Knowledge of pipeline construction, maintenance, and repair processes, particularly related to line extensions and rebuild projects. Level 3 Key Responsibilities: Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards. Identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. Qualifications: 5-6 years of experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection. API 1169 Level 4 Key Responsibilities: Must be able to monitor work performed by contractors hired by Company on gas pipeline and service installations, replacements, and relocations within Company's service area. Work shall be performed in accordance with Company standards and 49 CFR 192 Oversee transmission projects, ensuring the integrity, safety, and compliance of pipelines. Qualifications: Minimum of 6 years of hands-on experience in pipeline inspection, with a specialized focus on transmission projects. CPWI API 1169 C & L Inspection offers a full slate of Inspection, Construction Management and Engineering personnel to the Petroleum, Natural Gas and Telecom Industries. We surpass others in the industry by providing the newest technology, training and support that is unequaled. Working together with our inspectors and clients, our team strives to set a new bar for the Pipeline & Utilities Inspection industry.

Are you graduating in May 2027 and interested in shaping the future of transportation infrastructure? Join RS&H's Transportation Construction Management team as a Civil Field Engineer / CEI Inspector throughout Texas. As a Civil Field Engineering/CEI Inspector, you will monitor the contractor's on-site construction activities and inspect materials to ensure compliance with plans, specifications, and other contract documents on road and bridge construction projects. To be successful in this position, you will possess strong communication skills and be a team player who is enthusiastic, motivated, honest, and dependable. Responsibilities include, but are not limited to: • Maintain detailed records of the contractor's daily operations, including manpower, equipment, construction methods, and events that affect the work, • Monitor work zone traffic control plan and identify discrepancies and potential issues, • Monitor the erosion control plan and identify discrepancies and potential issues, • Perform sampling and testing of component materials and completed work, • Verify the dimensions of prepared and completed work, • Inspect the construction work and conduct field tests, • Track/measure completed work quantities for payment, • Perform survey checks Qualifications: • Degree in Civil Engineering, Construction Management, Construction Engineering, Engineering Management, or a related field from an ABET-accredited university, • Ability to read and interpret construction plans and specifications, • Strong written and verbal communication skills, • Must have a Valid Driver's License with a good driving record, • Must obtain any required certifications and pass appropriate qualifications tests for the position in the specified time frames, • Ability to sit, stand, climb, bend, twist, or stoop frequently and for prolonged periods, under various outside conditions, • Ability to reach horizontally as well as vertically for required tasks, • Ability to use construction or inspection safety equipment, including fall protection, • Ability to lift and/or move up to 50 pounds and shake up to 20 pounds Candidates must be legally authorized to work in the United States on a permanent basis. This position is not eligible for visa sponsorship or visa transfer. Preferred Qualifications: • Prior internship or related experience, • EIT Certification, • DOT Certifications, • OSHA 10 Certification An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Please view Equal Employment Opportunity Posters provided by OFCCP here. Please note: no agency representation or submissions will be recognized for this vacancy. Candidates should apply directly to this role to be considered. It is the responsibility of all third-party recruiting and employment agencies to know and adhere to our recruiting policy.

Forge ahead with WSB. WSB was founded on the understanding that culture drives results, and we've dedicated ourselves to the value of strong relationships, collaboration, and forward-thinking ideas. We've inspired each other to discover thoughtful and creative solutions that look beyond the needs of today to the opportunities of tomorrow. We invite you to forge ahead with us. The Sr. Construction Inspector, Construction Management provides advanced-level field inspection and oversight for complex drainage, water, and wastewater infrastructure projects; with a primary focus on underground/tunneling projects. This role ensures construction activities comply with approved plans, specifications, codes, and regulatory requirements while serving as a lead field representative for the project team. The Sr. Tunnel Inspector supports project delivery by coordinating field activities, mentoring junior inspectors, reviewing technical submittals, and assisting with issue resolution, change order evaluation, and quality management. What you will do: • Perform advanced, comprehensive field observation for major construction projects, primarily tunnel construction, but including water and wastewater treatment facilities, pipelines, pump stations, storage tanks, and related infrastructure., • Conduct daily on-site inspection of underground tunnel construction to ensure compliance with approved plans, specifications, and applicable codes., • Serve as a key field liaison, coordinating with clients, contractors, consultants, designers, and regulatory agencies., • Measure and record daily tunneling progress and material volumes generated and disposed; document contractor manpower, equipment, and material stored on site; and assist in agreement on the contractor's monthly pay quantities., • Interpret complex plans and specifications; ensure contractor compliance with engineering design requirements, permits, standards, and safety regulations., • Review contractor schedules, evaluate progress trends, identify risks or delays, report on issues arising that are contrary to the overall project plan, and provide recommendations to the project manager., • Coordinate with third-party testing agencies; verify testing compliance and interpret results for conformance with contract specifications., • Oversee and validate field survey data; review layout, elevations, alignment, and quality of construction tolerances., • Identify field issues, evaluate technical implications, and assist in resolving conflicts through coordination with engineers, designers, and contractors., • Participate in review and evaluation of potential change orders, design clarifications, RFIs, submittals, and shop drawings., • Support quality control and quality assurance processes throughout construction; document deficiencies and track corrective actions., • Serve as a field mentor and resource to inspectors by providing guidance, training, and support on inspection practices, documentation, and procedures., • Attend construction meetings and maintain strong communication across clients, contractors, consultants, and regulatory agencies., • Perform other duties as assigned., • Positions self to access tools and materials in various locations., • Traverses job sites having uneven terrain, slopes, confined spaces, or reinforced trenches., • Moves materials weighing up to 75 pounds periodically., • Conducts visual assessments of task quality and job site safety., • Ascends/descends into job site areas to complete inspections and data collection., • May remain in stationary position for extended periods. What you will bring: • High school diploma or equivalent required., • Associate degree or technical coursework in construction management, engineering technology, civil engineering, or related field preferred., • 15 + years of progressively responsible experience in construction inspection, construction management, or civil engineering., • Extensive experience with water/wastewater infrastructure construction preferred., • Experience leading field inspection activities or mentoring other inspectors is highly desirable, • Possession of a valid driver's license with a clean driving record and the ability to operate a motor vehicle is required., • Completion of OSHA 10-hour and 30-hour Construction Awareness training is required, • Advanced inspection certifications preferred, such as:, • NICET Level IIIII (i.e., Materials Testing), • ACI Concrete Field-Testing Technician, • Other relevant state or industry inspection credentials, • Ability to obtain additional certifications as required by project specifications., • Microsoft Suite Products (e.g. Outlook, Excel, Word, PowerPoint, SharePoint, OneDrive, etc.)., • Ability to use Bluebeam for editing, marking up, collaborating, and sharing PDF construction documents is required., • Experience using construction management and inspection reporting tools (e.g., e-Builder, Procore, BIM 360, or similar)., • Ability to use smartphones, tablets, GPS, and digital field tools for inspection activities., • Primarily field-based role must be comfortable working outdoors in all weather conditions., • Depending on specific project requirements and/or limitations, the inspector should anticipate/consider the preponderance of the work (i.e., work shift) to be performed underground in the vicinity of the tunneling operation/Tunnel Boring Machine (TBM)., • Must be able to work onsite at a WSB office, as needed, as required by the project, client, or hiring manager., • Standard work schedule will include the need to work extended hours (10-hour shifts), nights, or weekends as needed based on project demands., • Reliable transportation required and the ability to travel daily within assigned territory., • Ability to work nightshifts for extended periods (average 30-day duration rotation)., • Travel may be required.

STV is seeking an Inspector to join our Construction Management Group, to work onsite with one of our aviation clients in Austin, TX. The Inspector is responsible for overseeing the inspection and quality control of airport buildings and infrastructure, including terminals, aviation buildings, and support facilities. The inspector ensures that all structural, architectural, and finishing works comply with project specifications, building codes, safety regulations, and aviation industry standards. Building Inspection & Quality Control: • Conduct inspections of structural, architectural, and finishing works to ensure compliance with approved designs and material specifications., • Verify construction activities against FAA, ICAO, IBC, NFPA, and local building codes applicable to airport facilities., • Monitor concrete works, steel structures, roofing, glazing, flooring, ceilings, partitions, and fireproofing., • Identify construction defects, safety hazards, and non-conformities, and recommend corrective actions., • Witness testing and commissioning of various building systems, including HVAC, fire protection, plumbing, and electrical installations. Project Coordination & Reporting: • Collaborate with contractors, engineers, architects, and airport authorities to ensure project quality., • Maintain daily inspection logs, progress reports, and non-conformance reports (NCRs)., • Participate in project meetings and provide updates on construction quality and safety compliance., • Assist in troubleshooting construction challenges and ensuring timely resolution. Safety & Regulatory Compliance: • Ensure adherence to aviation safety standards, including fire resistance, wind loads, seismic requirements, and accessibility codes., • Conduct safety inspections related to airport infrastructure and report potential risks., • Support the implementation of risk mitigation strategies for high-priority buildings. Requirements & Qualifications: • Education: Diploma or Bachelor's Degree in Civil Engineering, Architecture, or Construction Management., • Experience: Minimum 5+ years of experience in building inspection, construction supervision, or quality control, preferably in aviation projects., • Certifications:, • Construction Quality Control (CQC), LEED, or OSHA certifications are a plus., • Familiarity with airport construction standards and regulations., • Technical Skills:, • Strong knowledge of structural, architectural, and finishing works in airport environments., • Proficiency in AutoCAD, Revit, MS Office, and inspection reporting tools., • Soft Skills:, • Strong problem-solving, communication, and teamwork skills., • Ability to work in a high-pressure environment with strict timelines. Note: This position is not eligible for sponsorship Compensation Range: $64,994.00 - $73,856.00 STV offers the following benefits Health insurance, including an option with a Health Savings Account Dental insurance Vision insurance Flexible Spending Accounts (Healthcare, Dependent Care and Transit and Parking where applicable) Disability insurance Life Insurance and Accidental Death & Dismemberment 401(k) Plan Retirement Counseling Employee Assistance Program Paid Time Off (starting at 16 days) Paid Holidays (9 days) Back-Up Dependent Care (up to 10 days per year) Parental Leave (up to 80 hours) Continuing Education Program Professional Licensure and Society Memberships STV is committed to paying all of its employees in a fair, equitable, and transparent manner. The listed pay range is STV's good-faith salary estimate for this position. Please note that the final salary offered for this position may be outside of this published range based on many factors, including but not limited to geography, education, experience, and/or certifications. Not sure this role is the perfect match? We encourage you to apply if STV's work and values resonate with you. We know great candidates don't always meet every qualification, and research shows women and people of color are less likely to apply unless they do. At STV, we believe strong talent comes from a wide range of backgrounds, and your skills and experience may align with this or another opportunity as we continue to grow.

Job DescriptionDescriptionThe Field Welder Technician 3 (Line bore) works independently to perform all aspects of welding repairs, fabrication, torch work, and line boring on heavy construction equipment and components utilizing Holt, Caterpillar and AWS Welding Procedures, Standards and Codes in both a shop and field environment. This position will quote jobs, break down prints and procedures to build a material list, order material and provide training to other team members. In addition to removal, installation, and the repair of heavy equipment components, including undercarriage. The incumbent in this position shall model the following practices daily: • Demonstrate alignment with the company's mission and core business values;, • Collaborate with key internal/external resources;, • Participate in ongoing self-development. Essential Functions • Models, promotes, and reinforces the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission., • Performs all aspects of welding (FCAW, SMAW and GTAW, fabricating, cutting, line boring and is very mechanically inclined and can remove, repair, and install all components associated with the repairs in a field or shop environment with no direct supervision., • Assists leadership with the evaluation and quoting of projects, in the shop and field environment., • Acts on behalf of leadership in their absence, leading others in the accomplishment of tasks by directing and managing on site resources., • Performs work order maintenance regularly in conjunction with the supervisor or lead., • Leads projects in the development, implementation, and execution of new business opportunities., • Obtains additional welder qualifications as required or requested by the customer or project requirements., • Demonstrates the knowledge and willingness to work in any department that needs assistance., • Pursues on-going self-development, classroom training and on-the-job training., • Makes decisions, recommendations, commitments and implements new ways of approaching projects., • Develops procedures and techniques for performing complex fabrications or repairs., • Provides recommendations for equipment needed to perform tasks., • Collaborates with leadership on large purchases., • Works safely at all times while consistently adhering to company policies, procedures and standards internally as well as externally when representing our organization., • Performs other duties assigned. Knowledge, Skills, and Abilities • Expert knowledge of equipment and dimensional tools, including their designs, uses, repair and maintenance., • Knowledge of line bore process-verifiable experience preferred, • Advanced knowledge of specification and drawing interpretations., • Expert knowledge with HOLT CAT current computer software, related hardware, and machine electronic systems., • Excellent work habits, accuracy and an exceptional attention to detail and quality of work and awareness., • Knowledgeable in the various methods of Non-Destructive-Testing methods., • Highly developed technical skills as a welder and fabricator with a demonstrated ability to effectively perform any assigned welding tasks., • Advanced verbal and written communication skills., • Advanced influencing skill, critical thinking, and problem-solving skills with an excellent mechanical aptitude., • Adaptable to changing schedules and exhibits time management skills., • Ability to follow logical troubleshooting and standard operating procedures when performing welding fabrication and repairs., • Proficient experience in a heavy equipment environment and required to operate several different machines and heavy equipment including forklifts., • Ability to follow manufacturer and company installation and service guidelines to ensure quality work., • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in fabrication and welding., • Ability to be a self-starter, self-motivated and be a leader with an exceptional safety record., • Ability to read, write, and understand information with the ability to follow directions and procedures., • Demonstrates all skills or requirements of lower tech level jobs within the department.Additional Requirements:, • Valid Driver’s license required., • Ability to obtain a valid Commercial Driver's License (CDL Class B or above) within 90 days of start of the position and must have an acceptable driving record., • Advanced Blueprint, • AWS Certified Welding Inspector (CWI) Preferred, • ASNT VT, PT, MT Certifications, • Ongoing Safety training, • Leadership training RequirementsEducation and Experience: • Specialized/technical training or some college courses (Welding Technology) preferred., • Eight or more years required., • One year supervisory/lead experience required, three or more years preferred, • Flux Cored Arc Welding (FCAW) 1” 3G and 4G on both A36 and T1, • Shielded Metal Arc Welding (SMAW) 1” 3G and 4G on both A36 and T1, • Gas Tungsten Arc Welding (GTAW) 3/8” 3G and 4G, • Link belt Crane – Welding Qualification, • First Aid/CPR; Confined Space Entry; Methane/O2 Deficiency, • MSHASupervisory Responsibilities:, • NoneTravel:, • Required with a potential for multiple overnight stays, 20%-40%.Physical Requirements:, • Ability to function, work around and with welding machines, service trucks, mobile cranes, overhead cranes, cutting torches and gauges, fit up and layout tools, forklifts and material handling equipment, hand grinder/sander and air tools., • Ability to move objects and use abdominal and lower back muscles to provide support over time without fatigue., • Frequently moves materials weighing up to 50 lb., anything more requires a team lift, or a mechanical lift., • Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina., • Ascends/descends with gradual or continuous progress by oneself using hands/feet while maintaining at least three points of contact to climb up/down ladders and/or equipment., • Be able to maneuver safely and work underneath equipment., • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work., • Significant amount of time standing and walking; at times kneeling, crouching, stooping, climbing, and reaching.Work Environment:, • Requires wearing common protective or safety equipment., • Regularly works outdoors around moving mechanical parts and noise level may be loud at times., • May be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and moisture/humidity., • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high-speed rotating equipment., • Occasionally performs work in cramped spaces and/or high places., • Daily interaction with internal/external customers and vendors; frequently interacts outside organizations.Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Tetra Tech is adding experienced Cost Estimators to our Disaster Recovery team to support current and future disaster recovery operations across the United States. At Tetra Tech, we are Leading with Science to solve the world's most complex challenges. Our industry-leading experts in engineering and consulting are committed to driving positive change in communities around the world. For over 50 years, we have been at the forefront of innovation and sustainability. Today we stand as a market leader, offering cutting-edge solutions in water, environment, energy, and international development. Our work has improved more than 625 million lives around the world. Join Tetra Tech to make a real difference. Our work leverages cutting-edge technologies, advanced analytics, and the expertise of world-class scientists and engineers to create meaningful change around the world. Discover your full potential - join us to advance your career while leaving a lasting legacy. As a Cost Estimator in Tetra Tech's Disaster Recovery Cadre, you will support FEMA Public Assistance and other disaster recovery programs by developing accurate, defensible, and well-documented cost estimates for infrastructure restoration, emergency work, and permanent work projects. You will evaluate damaged infrastructure, develop and validate project scopes, prepare cost estimates, and support funding eligibility determinations for public facilities and infrastructure. This is an on-call, as-needed position supporting disaster recovery programs following hurricanes, floods, tornadoes, wildfires, earthquakes, and other federally declared disasters. Assignments may be remote, field-based, or hybrid depending on client needs and project requirements. Essential Job Functions: • Support FEMA Public Assistance and other disaster recovery programs through project scoping, damage assessment, and cost estimating activities., • Support site inspections of damaged facilities and infrastructure to understand disaster-related damages, proposed repairs, and construction requirements., • Evaluate project scope, means and methods of construction, and restoration approaches., • Assist with the development and validation of disaster recovery project scopes., • Collaborate with applicants, engineers, architects, contractors, and program staff to define eligible work and project requirements. Cost Estimating: • Prepare conceptual, parametric, and detailed bottom-up cost estimates for disaster recovery projects., • Develop labor, equipment, materials, subcontractor, and general conditions cost estimates., • Estimate costs associated with repair, restoration, reconstruction, mitigation, and replacement projects., • Prepare cost analyses for roads, bridges, utilities, buildings, drainage systems, parks, and other public infrastructure., • Support development of FEMA Cost Estimating Format (CEF) analyses when required., • Develop estimate documentation that is clear, defensible, and suitable for audit and program review purposes. Technical Review and Compliance: • Review engineering reports, plans, specifications, contractor proposals, and construction cost documentation., • Evaluate project assumptions, quantities, unit costs, and estimating methodologies., • Apply knowledge of applicable construction standards, codes, and regulatory requirements., • Identify cost drivers, scope changes, and factors impacting project eligibility and funding., • Assist project teams with cost validation, reasonableness determinations, and documentation reviews. Program Delivery Support: • Provide technical estimating expertise to project managers, Public Assistance consultants, and applicant representatives., • Participate in project formulation meetings and recovery planning discussions., • Support Requests for Information (RFIs), technical reviews, appeals support, and other recovery program activities., • Coordinate with multidisciplinary teams including engineers, architects, environmental specialists, grant professionals, and construction experts., • Maintain project records and supporting documentation in accordance with client and program requirements. Required Qualifications: • Minimum of 2 years of professional experience in construction estimating, engineering, architecture, construction management, infrastructure planning, or a related discipline., • Experience developing conceptual, parametric, and detailed cost estimates for infrastructure or facility projects., • Experience estimating labor, equipment, material, and construction costs., • Familiarity with modern construction practices, facility assessments, project scope development, and construction inspection activities., • Experience working collaboratively within multidisciplinary project teams., • Strong analytical, organizational, and problem-solving skills., • Strong written and verbal communication abilities., • Proficiency with Microsoft Office Suite, including Excel, Word, Outlook, and Teams., • Ability to work independently and effectively under changing priorities and demanding schedules., • Ability and willingness to travel as needed for field assignments., • Valid driver's license. Preferred Qualifications: • Bachelor's degree in Engineering, Architecture, Construction Management, Quantity Surveying, Infrastructure Management, or a related field., • Professional Engineer (PE), Registered Architect (RA), Licensed Contractor, Certified Cost Professional (CCP), Certified Cost Estimator, or similar professional credential., • Experience using RSMeans, Xactimate, FEMA Cost Estimating Format (CEF), or other industry-standard estimating platforms., • Knowledge of FEMA Public Assistance regulations, policy, eligibility requirements, and the Public Assistance Program and Policy Guide (PAPPG)., • Previous FEMA experience as a Cost Estimator, Program Delivery Manager, Site Inspector, Hazard Mitigation Specialist, Policy Advisor, or similar disaster recovery role., • Experience with roads, utilities, drainage systems, site development, vertical construction, or public infrastructure projects., • Experience supporting disaster recovery, grant-funded infrastructure programs, or public sector capital projects. Physical Requirements: • Ability to perform field inspections and site visits at disaster-impacted facilities and infrastructure when required by an assignment., • Ability to travel to client offices, applicant facilities, disaster recovery operation centers, and other project locations as needed., • Ability to perform computer-based estimating and technical review activities for extended periods during remote or office-based assignments. Work Environment / Environmental Factors: • Work assignments may be performed remotely, in the field, or through a hybrid arrangement depending on client needs and project requirements., • Field assignments may take place in disaster-impacted communities and at damaged public facilities or infrastructure sites., • Work conditions and location may vary by assignment, including active disaster recovery operations and geographically dispersed project teams. Additional Information: • This is an on-call, as-needed cadre position. Work assignments are not guaranteed and depend on disaster declarations, contract awards, client needs, project requirements, qualifications, availability, and recovery program activations., • Acceptance of assignments is voluntary, and periods of inactivity between deployments may occur., • Assignment schedules may be flexible and may include periods of high-intensity workload during active recovery operations., • Some deployments may require extended travel or mobilization on short notice; other assignments may be fully remote., • Evening and weekend work may be required during surge events or active disaster recovery operations. Life at Tetra Tech: The perks of working at Tetra Tech include: • Comprehensive and market-competitive benefits., • Merit-based financial rewards., • Flexibility and company-wide commitment to work/life balance., • Collaborative team atmosphere that values the contributions of all employees., • Learning and development opportunities for ongoing professional growth. About Tetra Tech: Tetra Tech is the leader in water, environment, and sustainable infrastructure, providing high-end consulting and engineering services for projects worldwide. With 30,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. Tetra Tech is proud to be an Equal Opportunity Employer. All qualified candidates will be considered without regard to race, color, religion, national origin, age, disability, sex, marital or familial status, status as a protected veteran, or any other characteristic protected by law. Tetra Tech is a VEVRAA federal contractor and we request priority referral of veterans. We invite applications from all interested parties.

The Construction Inspector works with other Construction Managers, Design Engineers, Project Managers, Practice Leader, and Market directors for civil engineering projects for the Aviation, Water, and Transportation Markets. What You Will Do: Increasing responsibilities to perform construction manag

Construction Inspector, Construction Management provides advanced-level field inspection and oversight for complex drainage, water, and wastewater infrastructure projects; with a primary focus on underground/tunneling projects. Tunnel Inspector, Construction Management Forge ahead with WSB. Tunnel I

Woolpert is seeking a Construction Inspector to join the CE&I team in Austin, Texas. This role supports public and private infrastructure construction, coordinating with design engineers, project managers, and practice leaders to ensure compliance with plans and specifications.

Job Description Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: • Community “We care for our communities”, • Integrity “We act with integrity”, • Passion “We infuse passion into everything we do”, • Quality “We believe quality comes from a culture of innovation and continuous improvement”, • Growth “We dedicate ourselves to personal and business growth” Raba Kistner is seeking an organized, dependable Certified Welding Inspector – NDT Level II to join our team in Austin, TX. Responsible for inspections of structural steel, carbon steel piping fit-up, and welding. The Certified Welding Inspector – NDT Level II will also perform nondestructive evaluations, such as magnetic particle and ultrasonic testing. Other responsibilities include: • Serve as consultant in area of expertise (structural steel, pipeline, pressure vessel, and reinforcing steel)., • Prepare inspection reports and other client required letters using RK format., • Maintain close contact with all clients during the entire duration of projects., • Notify Leader of potential group involvement in legal matters., • Work with legal counsel as required and directed., • Position will require traversing uneven construction sites, climbing ladders, performing inspections from a bucket lift, performing inspections from scaffolds, and working outdoors in hot, cold, and windy conditions., • Perform other duties as assigned. Qualifications • High School Diploma or GED required., • Minimum 5 years steel inspection/welding experience., • Must be certified by the American Welding Society as a Certified Welding Inspector (AWS QC1)., • Must be certified by the American Society of Nondestructive Testing as NDT Level II or higher in both ultrasonic and magnetic particle testing., • Possess valid Texas driver’s license and meet company’s auto insurability requirements. Organizational skills to utilize company resources efficiently and effectively. Management skills to supervise project teams and evaluate progress of projects. Good oral and written communications skills and ability to work with clients and staff within the organization. Intermediate in Microsoft Office (Word, Excel, PowerPoint, Outlook). Must be self-motivated with good attendance record and be able to work independently. Able to drive company vehicle, manage and complete all assigned jobs efficiently and on time. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is regularly stand, walk, use hands to finger, handle or feel, talk, or hear, reach with hands and arms, climb or balance, stoop, kneel, crouch, or crawl, and drive vehicle short and/or long distances. Frequently sit and occasionally, taste or smell and utilize hand tools such as sledgehammers, shovels, and picks. Occasional lift and/or move up to 50 pounds with or without assistance. Vison requirements include close, distance, and color. May be required to occasionally work in high, precarious places (tall structures, bucket lifts, extension ladders, etc.), fumes or airborne particles (painting, sanding, solvents, flying lint or dust particles, etc.), toxic or caustic chemicals (including potential for chemical spills, etc.), wet or humid conditions (not weather-related, such as greenhouse, carwash, etc.), extreme cold (not weather-related, such as freezer, cold storage, etc.), extreme heat (not weather-related, such as furnace, kitchen, ovens, etc. where temperature is regularly above 100 degrees F), risk of electrical shock (live electrical wires, equipment that retains power after shutoff), risk of radiation (x-ray equipment, nuclear radiation, electromagnetic radiation, etc.), vibration (jackhammer, soil compactor, equipment that creates high vibration, etc.). Frequently required to work in outdoor weather conditions (exposure to outdoor heat, cold or inclement weather). The noise level for this position is Loud (metal can manufacturing department, large equipment, etc.) This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. EOE/Disabled/Veteran Drug Free Workplace

Job Description Quality Control Manager Location: Central Texas Employment Type: Full-Time Position Summary The Quality Control (QC) Manager provides leadership and oversight of quality control activities for a electrical construction project. This role is responsible for ensuring all electrical installations, prefabricated assemblies, testing, and turnover documentation comply with contract requirements, applicable codes and standards, and Hays Electrical Services’ Corporate Quality Management System (CQMS). Serving as the primary onsite quality lead within HES scope, the QC Manager drives disciplined field execution, inspection compliance, and documentation integrity. This position works closely with project leadership, field supervision, commissioning teams, and client representatives to support inspection readiness, energization readiness, and successful system turnover, without assuming authority beyond HES’ defined scope of work. Key Responsibilities • Implement the Corporate Quality Management System (CQMS) within the project’s electrical scope., • Review contract documents, drawings, specifications, and submittals to ensure field installation aligns with approved requirements., • Identify quality risks, Definable Features of Work (DFOW), and required inspection points during planning and execution., • Perform routine inspections of electrical installations, prefabrication assemblies, and equipment to verify compliance with specifications and workmanship standards., • Enforce installation requirements including A/B path segregation, grounding and bonding, labeling, and equipment alignment., • Verify required inspections are completed and documented prior to concealment of work., • Maintain consistent field presence to identify and correct deficiencies in real time., • Execute Inspection & Test Plans (ITPs), ensuring hold points, witness points, and inspection milestones are achieved., • Verify completion and documentation of required electrical testing (e.g., insulation resistance, continuity, torque, grounding)., • Support commissioning and energization readiness by confirming installations are complete, tested, and compliant., • Participate in system walkdowns, inspections, and readiness reviews with GC, Owner, and commissioning teams., • Identify, document, and manage Non-Conformance Reports (NCRs), ensuring timely corrective action and closure., • Support root-cause analysis for recurring or critical quality issues., • Maintain complete, accurate, and audit-ready quality records, including inspections, test reports, and turnover documentation., • Coordinate with Project Management, Superintendents, Prefabrication, and Commissioning teams to integrate quality into all activities., • Provide routine quality reporting, including inspection status, NCR trends, and commissioning readiness., • Track quality performance metrics such as inspection completion, NCR trends, and rework., • Identify gaps and implement corrective actions to improve field execution and reduce defects., • Ensure all activities remain within HES authority, limited to inspection, verification, documentation, and corrective action for electrical scope only. Education & Qualifications Required • 5–10 years of experience in electrical construction, QA/QC, or commissioning support within large-scale commercial, industrial, or mission-critical projects., • Strong working knowledge of NEC, NFPA, NEMA, and applicable electrical installation standards; familiarity with NETA testing requirements preferred., • Proven experience performing field inspections of electrical systems, including power distribution, grounding/bonding, and critical equipment installations., • Ability to read and interpret complex electrical drawings, one-lines, specifications, and submittals., • Demonstrated experience managing quality documentation, including inspections, test records, and Non-Conformance Reports (NCRs)., • Strong communication skills with the ability to coordinate effectively with field leadership, GC/Owner representatives, and commissioning teams., • High level of attention to detail with a disciplined approach to inspection, verification, and documentation. Preferred (Not Required) • Associate or Bachelor’s degree in electrical engineering, construction Management, engineering technology, or related field., • Certifications such as:, • ASQ Quality Technician (CQT) or Quality Inspector (CQI), • NETA Technician (Level II/III), • NICET certifications, • CQM-C (USACE) or ISO Auditor credentials Powered by JazzHR 8ixeISyEnM

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Job Overview: Our client is seeking a Project Manager with a strong SAP foundation to oversee and manage SAP projects and workstreams.Must Have Skills: 8+ years of SAP/IT experience, with strong SAP Project Management experience.Strong hands-on understanding of SAP ECC and end-to-end SAP business pr

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Experience supporting electrical substation, transmission, power delivery, or utility construction projects. This position will support the successful planning, execution, and closeout of substation construction projects, including both below-grade civil scopes and above-grade electrical installatio

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Bachelor’s degree in Engineering, Construction Management, Finance, or related field.

At Capsum, a key innovative contract manufacturer in the cosmetics industry, Passion & Innovation are expressed in everything we do: through our patented technologies, custom-built machines, original formulations, and creative concepts.Our enthusiastic and dedicated teams design and sustainably manu

E-Z Bel Construction, LLC is an equal opportunity employer. The Signals Superintendent leads day-to-day field operations for traffic signal, intelligent transportation systems (ITS), illumination, and related underground and overhead construction projects. This role is responsible for safe execution

This role starts as a 3-6 month contract, followed by an evaluation to ensure the contractor performs well.If performance is strong, a full-time role will be considered.Anumana is harnessing industry-leading AI and translational science to decode electrical signals from the heart as never before, em

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Symbio is a contract research organization supporting global studies across Dermatology, Inflammatory Diseases, Aesthetics, Rare Disease, Medical Devices, and Gastroenterology—from early development through regulatory approval.We are seeking a full-time Clinical Project Manager I or II to join our

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Join Pulse Health Sciences as a Project Manager.Help shape the future of oncology education.Pulse Health Sciences is one of the fastest-growing divisions of Match Health, bringing together the world's leading oncologists, biotech innovators, and Life Science companies through high-impact scientific

To manage clinical projects for aesthetic medical devices effectively, ensuring smooth execution of clinical affairs under a contract-based engagement, with flexibility and delivery-oriented mindset.Acts as the primary liaison between the company and sponsors/vendors for assigned medical device stud

Pharmaceutical Project Manager – Immunology.Pharmaceutical Project Manager – Immunology.This role will facilitate asset strategy, manage integrated development plans, and help ensure successful execution of project milestones within a fast-paced pharmaceutical/biotech environment.Facilitate and

PROJECT MANAGER | Facility Expansion & Special Projects – Behavioral Healthcare (SUD & MH).Pompano Beach, FL | Remote | Up to 35% travel.Banyan Treatment Centers is seeking a.This is a hands-on, high-visibility role for someone who thrives running multiple concurrent, fast-moving launches without

Join our Team! At Health Data Movers, we move healthcare forward.As a healthcare IT consulting and staffing firm, we help health systems across the country get the most out of their technology.Join us and help shape the future of healthcare.Health Data Movers (HDM) is seeking an experienced Epic Pro

Symbio is a contract research organization supporting global studies across Dermatology, Inflammatory Diseases, Aesthetics, Rare Disease, Medical Devices, and Gastroenterology—from early development through regulatory approval.We are seeking a full-time Associate Clinical Project Manager II to joi

Ability to read and interpret construction plans and specifications. If you are a proactive, travel-ready construction professional looking for a challenging and rewarding role, we encourage you to apply. Proven experience as a Site Project Manager or Superintendent, preferably in paving or heavy ci