Cost engineer jobs in Los Angeles, California - Page 16Create job alerts

Job Description About Epirus Epirus is a high-growth technology company dedicated to overcoming the asymmetric challenges inherent to the future of national security. Epirus' flagship product, Leonidas, is a software-defined system built using intelligent power management techniques which allow power-hungry systems to do more with less. Job Summary: This is an exciting role in an innovative company. The ideal candidate for the Senior Systems Engineer position is someone who has experience with full lifecycle system development. In this role, you will work closely with a talented engineering team, reporting to the Senior Manager, Systems Engineering and part of Systems team. This role is a multidisciplinary role, with significant breadth (interacting with all engineering disciplines) and depth (from customer needs to unit-level specifications). You will focus on typical Systems Engineering responsibilities, such as requirements definition & management (at system, subsystem, and component levels), system architecture, system analysis, change management, interface definition, etc. Additionally, this role is a key stakeholder in integration, verification, and validation (IV&V) planning and execution to ensure products meet requirements. As much as possible, a Model-Based Systems Engineering (MBSE) approach is employed to make Systems Engineering processes more thorough and efficient. Responsibilities: • Contribute to system requirements definition and management for a product, • Ensure Key Performance Parameters, as derived through mission modeling and operational analysis, are properly flowed to system requirements, • Act as an interface with either existing or prospective customers to prove that customer requirements/needs are fully satisfied by system requirements, • Coordinate key requirements with subsystem design teams, ensuring requirement flow-down to hardware and software subsystems is captured and properly traced, • Collaborate with design engineering to ensure system architecture is properly captured in MBSE diagrams (to include Structural and Behavioral Diagrams), • Work with business development to create architectures for new solutions and applications in proposals, • Maintain architectural definition throughout the development process to ensure team alignment, • Develop interface control documentation and own interface management between hardware/software/firmware subsystems, • Perform trade studies and quick-turn impact analyses to facilitate agile hardware/software/firmware development, • Perform analysis to prove that system requirements are addressed by the system design, • Ensure best practices for configuration management are adhered to, • Facilitate multi-disciplinary coordination across teams, • Participate in IV&V planning and preparation, • Contribute technical writing and figures to proposals and other business development efforts Basic Qualifications: • BS or MS degree in Electrical Engineering, Computer Science, Aerospace, or a similar field, • Minimum 5 years industry experience (or minimum 3 years of experience with an MS degree), preferably with experience spanning the entire product lifecycle (Concept to Delivery), • Demonstrated experience contributing to the establishment of a technical baseline of a system/product, • Experience working with Systems Engineering tools for Requirements Management and Product Lifecycle Management (e.g. JAMA, Polarion, DOORS), • Experience working with MBSE (e.g. SparxEA, Capella), • Experience with Python development or other similar object-oriented languages, • Experience working with Git/GitHub, or similar version control systems, • Experience working with RF systems (e.g. radar, comms, EW, etc.), preferably including phased arrays, • Experience working in System Safety and Reliability Engineering, • Good written and oral communication skills; not afraid to speak up, either to ask for help or disagree on a technical point that warrants more discussion, • Collaborative; capable of working across all levels of the organization, • Ability to anticipate and communicate blockers, delays, and cost ballooning within the project before they require escalation, • Organized, comfortable working in a fast-paced, ever-changing environment, • Focused, with perspective on what matters most, rapidly delivering customer value ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is: $129,700—$158,400 USD

Job Description ✈️ Now Hiring: Manufacturing Engineer | Aerospace Manufacturing Sky Limit Systems is partnering with a growing aerospace manufacturer that’s investing in smarter processes, better tools, and stronger teams — and they’re looking for a hands-on Manufacturing Engineer to help drive that change. This is a full-time, onsite role for a mechanically inclined problem-solver who thrives on the production floor. You’ll design tooling and fixtures, lead continuous improvement projects, and play a key role in building a leaner, more efficient operation. It’s ideal for someone who’s ready to grow — both technically and as a future leader. What You’ll Do: • Design, develop, and implement tooling, fixtures, and process improvements to enhance production efficiency and quality, • Collaborate with production, quality, and engineering teams to troubleshoot issues and optimize manufacturing flow, • Lead and manage continuous improvement initiatives focused on waste reduction, throughput, and cost savings, • Support root cause analysis and corrective actions for production challenges, • Document standard work procedures and support lean transformation efforts across the floor, • Oversee small to mid-scale improvement projects from concept through implementation, • Serve as a technical mentor and potential future leader within the manufacturing team What We’re Looking For: • Bachelor’s degree in Mechanical, Industrial, or Manufacturing Engineering (or related field), • 5+ years of experience in aerospace or precision manufacturing, • Strong mechanical aptitude with hands-on experience building or designing tooling and fixtures, • Working knowledge of Lean, Six Sigma, or Continuous Improvement methodologies, • Excellent communication, organization, and leadership potential, • Ability to thrive in a non-lean environment and drive measurable improvements, • Someone eager to learn every part of the operation and grow into a supervisory or lead role Why This Opportunity: This role is for an engineer who doesn’t just want to maintain — but to build, improve, and lead. You’ll gain exposure to multiple product lines, learn how every part of the business operates, and play a key role in shaping a more efficient production environment. If you’re ready to roll up your sleeves, lead projects, and grow into leadership, Sky Limit Systems wants to meet you.

The ideal candidate has a proven track record of performing construction quality control audits, providing cost control recovery plans, maintaining cost systems, and providing monthly cost reports. Create/open new cost codes within the existing work breakdown and project coding structures for contro

Turner & Townsend Heery are looking for a Cost Engineer/Cost Manager to join our team and support construction cost services for our clients. Manage estimating services for full project by developing project estimates (relating to construction, fees, direct work and other costs), reviewing estimatio

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. We are seeking a leader to scale our design-for-manufacturing (DFM), estimation and quote function. This is a critical senior leadership role that will own manufacturability analysis, quote estimation, and pricing strategy and execution for a highly automated manufacturing system, currently focused on precision machining. You will be expected to engineer and build scalable systems that enable us to rapidly ingest and analyze thousands of complex part packages per year, quote with accuracy, and attain quality and profitability targets. You will build a world-class technical team to support this, while influencing system-wide changes across engineering, software, factory, sales, and operations. You will scale your team to support new capabilities, materials, factory locations, part types, and customer complexity. Responsibilities: * Own design-for-manufacturing analysis (DFM) and recommendations for new and existing customers that leads to high factory throughput, low rework, reduced manufacturability risk, and smoother New Product Introduction. * Own DFM engineering, profitability, adherence, and time-to-quote goals * Build a cost estimation function that scales ahead of business growth, including customer + part volume, material types, manufacturing capabilities, and factory capacity * Own bid analysis, pricing, and risk estimate recommendations * Generate and drive new capabilities roadmap, including materials, machines, factory capabilities, and capacity * Drive strong feedback loops with factory operations, sales, supply chain, and customer success teams. Requirements: * Bachelor’s degree in Engineering * 10+ years overall experience, including 5 years directly leading teams * 3 years of experience in precision parts manufacturing, including one or more of: 5-axis CNC machining, mill-turn, turn-mill * Demonstrated experience rapidly scaling DFM, estimation/quoting teams and systems * Experience managing large cross-functional teams (engineering, commercial, manufacturing operations) * Exceptional communication and stakeholder-management skills (everything from executives to engineers to sales managers and customers) * Experience in aerospace, defense, maritime, and/or aviation environments, including part portfolios and procurement cycles * Experience building teams at a hypergrowth startup Compensation For this role, the target salary range is $190,000 - 260,000 (actual range may vary based on experience and performance). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job DescriptionJoin the Future of Robotic Biomanufacturing! Multiply Labs is a robotics company on a mission to solve a significant bottleneck in modern medicine: the manufacturing of life-saving advanced biologics, from gene and cell therapies to antibodies and more. Today, these therapies are produced through manual, labor-intensive processes. Costs are extremely high—often $500K–$2M per patient—limiting access to only a small fraction of those who need them. As product complexity increases and the cost of failure and scientific labor rises, the industry is shifting toward automation. Robotics and AI are making automated biologics manufacturing feasible, reliable, and economically scalable. We believe the future of biomanufacturing is robotic—closed, automated, and scalable—ensuring critical therapeutics are accessible to every patient who needs them. Why This Matters We don’t just build robots; we build the infrastructure for the next generation of biologics manufacturing. Our technology allows biopharma companies to scale production without redesigning their science, drastically lowering regulatory hurdles and bringing costs down to a level where these treatments can actually reach patients. The Stack & The Scale The Mission: Build the world’s best robots to make life-saving therapies accessible to all.The Technology: Advanced robotic orchestration, high-precision automation, cloud-integrated hardware-software systems, dextrous manipulation, and imitation learning.The Location: Headquartered in San Francisco, CA.The Backing: Supported by premier investors, including Casdin Capital, Lux Capital, and Y Combinator. About the Role As a Robotics Field Engineer, you will be the on-site operational lead for our robotic system deployed in Los Angeles, California. Working at the intersection of robotics and biopharma, you will serve as the primary bridge between our engineering team and our on-site customer partners. You will collaborate daily with internal and external teams to coordinate operations, manage material workflows, and ensure the reliability of our automated manufacturing systems. This role is for a proactive, organized problem-solver dedicated to maintaining high-uptime systems that have a direct impact on patient lives.Responsibilities include: • Technical Troubleshooting & Scripting: Leveraging Python to develop and execute basic testing scripts for validation, assisting the software team in isolating bugs and verifying fixes in a real-world environment., • System Triage & Recovery: Serving as the first line of defense for the robotic cluster, executing software recovery procedures, and utilizing mechanical familiarity to identify potential error causes., • Issue Tracking & Communication: Developing and maintaining error tracking systems to identify trends. You will provide organized, proactive communication regarding cluster issues, needs, and status updates to both internal stakeholders and on-site partners., • Cluster Operations & Scheduling: Detailed planning of daily cluster schedules at the deployment site, aligning closely with engineering, product teams, and customer partners to set testing timelines and ensure optimal system utilization.Qualifications, • Bachelor’s degree in Engineering (Mechanical, Electrical, Software), Robotics, or a related discipline., • 2+ years of professional experience in field engineering, system integration, or a related technical role., • Familiarity with Python, with the ability to read code and write basic scripts for testing and automation., • Mechanical aptitude with the ability to troubleshoot electromechanical systems and identify hardware vs. software root causes., • Excellent organizational skills and the ability to manage complex schedules in a fast-paced startup environment., • Strong communication skills, capable of bridging the gap between technical engineering teams and operational goals.Nice to Haves, • Familiarity with AWS deployments, managing production environments, and troubleshooting cloud-connected hardware., • Experience with laboratory automation or working in GxP/regulated environments., • Experience using data visualization tools (e.g., Grafana, Tableau) to monitor cluster performance and reliability trends.Physical & Working Conditions, • Ability to reach, stoop, crouch, and kneel; this specifically includes the need to physically enter, stand, or crouch inside a robotic cluster for maintenance, cleaning, or intervention., • Ability to lift up to 25 pounds (e.g., equipment, replacement parts, tools) and lift up to 5 pounds overhead., • Manual dexterity required for using hand tools, cabling, and making mechanical adjustments., • Work is primarily performed in a manufacturing area adjacent to a laboratory setting. This requires adherence to strict safety protocols (e.g., Biosafety Level 2) and awareness of surroundings., • Potential exposure to hazardous materials, including biological agents and cryogenic materials, while servicing equipment that handles these substances., • Required use of Personal Protective Equipment (PPE), including lab coats, safety glasses, and gloves for extended periods during bio experiments., • This role requires the ability to work a standard schedule, but may necessitate occasional evening or weekend work (or on-call availability) to respond to critical cluster issues or complete time-sensitive maintenance.Total Rewards & Life at Multiply Labs, • Competitive Compensation: Salary range of $90,000 - $160,000 a year plus meaningful early-stage equity. We want our team to have a real stake in the future we’re building., • Premium Health: Premium Medical, Dental, and Vision plans with subsidies for child dependents., • Wealth Building: 401(k) with a 4% company match to help you plan for the long term., • Pre-Tax Commuter Benefit: Pay for eligible transit and parking with pre-tax dollars to save on commuting costs., • Parental Support: Robust Paid Parental Leave to support your family’s newest additions., • True Flexibility: We offer Flexible PTO and 12 Paid Holidays, trusting you to manage your time and recharge when you need it., • No Set Hours: Set your own schedule in alignment with your manager and team. We hold a high bar, measuring success by impact and outcomes – not hours logged., • Office Perks: A vibrant SF office culture featuring catered team lunches, stocked kitchen, and frequent team events., • H-1B and Green Card sponsorship available for exceptional talent., • Referral bonuses for helping us build a world-class team., • Great people, meaningful work, and a team that genuinely believes in what we're building. Come build the world’s best robots—and help make life-saving therapies accessible to all.We actively seek candidates with diverse perspectives and lived experiences. We’re committed to building a team where everyone feels valued, respected, and empowered to do their best work. Multiply Labs encourages candidates from all backgrounds to apply — even if you don’t meet every qualification. If you’re excited about our mission and think you can contribute, we’d love to hear from you. Our headquarters is located in San Francisco’s vibrant Dogpatch neighborhood. Some roles may require 5-10% of domestic and international travel.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The factories-as-a-service team analyzes our current customers' production and supply chain challenges, builds data-driven presentations, designs and scopes factories of the future, and assists the Federal and Strategic sales team in forming long-term partnerships with the DOD, Primes, and other manufacturers. This team is responsible for scoping, design, cost, schedule, and technology analysis, as well as proposals for major programs and manufacturing transformations across all manufacturing methods and domains. With several major programs in flight, we are hiring rapidly for this team that will effectively analyze, design, scope, plan, and handover (or join) execution of large-scale manufacturing efforts. The Role: Hadrian is seeking a Process Engineer, Casting to join our Scoping & Special Projects team. This role is ideal for an engineer with deep casting expertise and a systems mindset. You will lead the technical decomposition of complex customer requirements into scalable factory cell designs, with a focus on sand and investment casting. Your responsibilities will include, but not be limited to, the following: • Analyze Bills of Materials (BOMs), CAD models, and technical drawings to classify casting parts by process complexity, alloy type, size, and risk., • Develop first-principles cycle-time models using simulation data, standard routings, and historical performance metrics., • Define and document end-to-end casting process flows, including melt preparation, mold/core fabrication, pouring, and post-processing., • Translate technical scoping outputs into capital and operational requirements for factory implementation (equipment, staffing, takt planning)., • Collaborate cross-functionally with quality and inspection teams to define inspection strategies, CTQ checkpoints, and measurement system analysis plans. What We’re Looking For: • 5+ years of experience in process engineering within sand or investment casting environments, including melt and mold/core operations., • Proficiency with casting simulation tools (e.g., MAGMASOFT, ProCAST) and experience validating simulation outcomes against real-world results., • Strong understanding of quality systems, including authorship of PFMEAs and control plans; experience executing AS9102-compliant First Article Inspections (FAIs)., • Familiarity with sand testing methods (e.g., GFN, permeability, moisture, compactability) and binder ratio control protocols. What Will Set You Apart: • Experience designing greenfield manufacturing cells or establishing lab infrastructure for heat treatment or sand testing., • Knowledge of aerospace and defense casting standards (e.g., NADCAP, ASTM specifications, traceability requirements)., • Familiarity with casting automation technologies and non-destructive testing (e.g., PT, RT, UT) methods., • Exposure to regulated manufacturing or reporting frameworks (e.g., PPAP, EVMS, IPMDAR). Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Work closely with project stakeholders, including PMs, engineers, contractors, and finance teams, to gather relevant data and ensure alignment on project cost management. Use this data to support effective cost control and project decision-making. Conduct in-depth cost analysis, what-if scenarios, a

A leading construction company in California is seeking a Senior Project Engineer to provide technical support in project document control and administration. The ideal candidate will have a 4-year degree in engineering or business, along with experience in construction and design.

Job DescriptionSamba is an AI-powered media intelligence company on a mission to give marketers the complete picture of their audiences. Our AI indexes media consumption across millions of smart TVs and 2.5 billion web pages, combining that data with third-party signals through the Samba Knowledge Graph, a map of the real interests, behaviors, and purchase intent of 1.5 billion user profiles globally. Brands, agencies, publishers, and platforms use Samba to make smarter decisions across every stage of the marketing funnel. We are seeking a skilled Data Engineer to strengthen our data platform team. Our team is tasked with building and maintaining the data platform that powers the entire organization; from ingestion to analytics and reporting; from valuable viewership and contextual datasets to scalable applications that enable data-driven decision making. While our organization is hybrid, you'll be building mostly on AWS, Databricks, BigQuery and Snowflake technology. The ideal candidate will have strong experience in cloud-based data engineering, distributed data processing, and data governance and metadata management to support analytics, reporting, and machine learning use cases.What You'll Do • Build scalable data product architecture, capable of supporting both internal and external data consumers, • Responsible for modernizing our data frameworks and integrations with Databricks and BigQuery, • Upgrade and reduce toil for developers on Apache Airflow, • Develop and optimize data transformations using Apache Spark (PySpark/Scala), • Build procedures and guidelines to help teams operate with data, • Identify bottlenecks in our development lifecycle and find solutions to improve them, • Drive innovation throughout the tech org by evangelizing and educating teams on best practices and new technologies, • Work directly with our data teams and FinOps teams to drive efforts that span across teams, • Implement data governance, access control, and auditing using Databricks Unity Catalog, • Build and integrate automated, reusable data validation suites using data quality frameworks (Great Expectations or similar)Implement monitoring and anomaly detection systems for data quality, reliability and performance, • Develop and manage REST APIs to support secure data access, automation, and integration, • Collaborate with data scientists, analysts, and software engineers to deliver governed, reusable data assets, • Implement monitoring, logging, and alerting for data workflows, • Optimize cost and performance of cloud-based data infrastructureWho You Are, • Bachelor’s degree in Computer Science, Engineering, or a related field (or equivalent experience), • 5+ years of experience in data engineering or a related role, • Strong hands-on experience with Databricks, Apache Spark and BigQuery or Snowflake, • Proven experience with Modern table formats such as Delta Lake and Iceberg, • A deep understanding of the data lifecycle and how teams operate with data, • Hands-on experience implementing data governance and metadata management using Databricks Unity Catalog, • Experience managing and extending Apache Airflow (custom operators, plugins, infrastructure), • Experience with Kubernetes, • Solid experience with AWS cloud services, especially S3 and data-related services, • Experience with data validation and data quality principles and working with SLA systems, • Proficiency in Python and SQLExperience with data modeling, data lakes, and lakehouse architectures and a strong understanding of distributed systems and big data processing, • Preferred Qualifications, • Experience with Infrastructure as Code (Terraform), • Knowledge of CI/CD pipelines for data platforms, • Experience working in Agile/Scrum environments, • AWS, Databricks, or cloud data certifications, • Experience working with data clean room environments, including implementation or collaboration within Snowflake, Databricks, or BigQuery ecosystems, • Experience with streaming data pipelines (Kafka, Flink) #LI-PS1Samba is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We strive to empower connection with one another, reflect the communities we serve, and tackle meaningful projects that make a real impact. Samba may collect personal information directly from you, as a job applicant, Samba may also receive personal information from third parties, for example, in connection with a background, employment or reference check, in accordance with the applicable law. For further details, please see Samba's Applicant Privacy Policy. For residents of the EU , Samba Inc. is the data controller.

Job Description Embark on a transformative career with RAVE Aerospace, where we are forging an unparalleled in-flight entertainment ecosystem. As an innovative company we design and engineer world-class In-Flight Entertainment and Connectivity (IFEC) solutions. Our products are constantly evolving, solving complex media distribution, playback, and networking problems in a secure, demanding on-wing environment. RAVE Aerospace's IFEC products are utilized by many of the world’s premier air carriers. Step aboard and help us by creating the best in-flight experiences for today and beyond! Job Summary The Senior Mechanical Engineer has responsibility for mechanical and electromechanical design and systems integration of company products. This individual has a significant impact on product innovation, cost, schedule, and feature set. This individual will retain technical ownership of mechanical designs and is responsible for the system assembly as a whole throughout the design, development, production, and support phases. Core Responsibilities • Product development activities ranging from conceptual development, prototyping, and design validation to manufacturing and existing product support; individually and collaboratively, • Collaborates with engineers of various disciplines to develop products with electromechanical and mechanical content, • Integration of electronics, mechanical and user interfaces, including PCBAs, switches, sensors, buttons, screens, power supplies, wiring, cable management, and system peripherals, • Develops hand-held user interfaces with levels of tactile and cosmetic quality meeting industry leading consumer products with premium look and feel, • Develops systems and components made from a variety of fabrication techniques resulting in assemblies ranging in size from small to large for low, mid and high production volumes, • Develops highly reliable systems as measured by industry standard statistical techniques, • Develops systems optimized for manufacturability/cost/performance/reliability and component availability, • Performs root-cause analysis of issues detected during development, engineering testing, qualification, or when deployed products are returned from the field, • Designs assembly fixtures as well as test fixtures as needed, • Advanced component and complex assembly design, • Authors mechanical drawings, technical documents and assembly instructions as needed, • Bachelor’s Degree in Engineering or equivalent experience in a related field, • 6+ years of experience working in a similar role, • Experience designing LRUs to meet FAA certification requirements such as DO-160, • Advanced user of a 3D CAD (preferably SolidWorks) and PDM, • Capable of generating specification drawings with dimensions and tolerances per ASME 14.5Y, • Experience implementing tolerance studies and analyses to document and validate part variation and assembly fits and clearances, • Experience designing injection molded, sheet metal, die cast, machined, stamped and die cut parts, • Experience with statistical techniques for part fabrication and manufacturing process output control, • Experience with electromagnetic regulatory requirements and mitigation of problems found during testing, • Experience with the implementation of various thermal management techniques, • Proven track record of owning and driving significant portions of complex engineering projects The starting pay range for this position is $110,000 - $125,000 per year however, base pay offered may vary depending on the level of the position, skills, experience, job-related knowledge, and location. In addition to a comprehensive package of health benefits that include company contributions, RAVE Aerospace offers a variety of additional benefits and perks to enhance your work-life balance experience including but not limited to: • Discretionary bonus program, • Future financial security with a 401(k) program with company match, • Paid time off covering vacations, personal time off and sick days, capped off by an exciting year-end holiday shutdown, • Embraced flexibility with our alternative work schedule (9/80) to navigate your workweeks with every other Friday off

Job Description Senior Electrical Engineer • $120K-$150K Base + 401K, Safe Harbor Match, Profit Sharing + Annual Bonus + Medical/Dental, • Licensed Professional Engineer (PE), • Communication Skills, Job Walks, Proposals, Reports, Meeting Notes, • Familiarity with Authority Having Jurisdiction (AHJs), • Familiarity with Building Codes and other applicable codes and standards, • Design of electrical power and lighting system for campuses, sites, and buildings. Includes design of underground and aboveground power distribution, metering, switchgear, switchboards, panelboards, transformers, receptacles, switches, lighting fixtures, and lighting controls, • Coordination with all disciplines (Civil, Architectural, Structural, Mechanical, Plumbing, Fire Sprinkler, Electrical, Fire Alarm), • Specifications (book specs editing Masterspecs), • Cost Estimating (ROM, RS Means), • Peer Review, Mentoring Staff, • Work in Torrance Office

Job DescriptionHermeus is an aerospace and defense technology company founded to radically accelerate air travel by delivering hypersonic aircraft. The company aims to develop hypersonic aircraft quickly and cost-effectively by integrating hardware-rich, iterative development with modern computing and autonomy. This approach has been validated through design, build, and test of the company’s first combined turbojet-ramjet engine and is now being scaled through its first flight vehicle program, Quarterhorse. Hermeus is also developing Darkhorse — an uncrewed hypersonic aircraft designed to deliver unique asymmetric capabilities to the warfighter Responsibilities: • You will shape the future of commercial supersonic and hypersonic flight. Our team is responsible for the design, testing, and integration of GNC systems, electrical hardware, control software, power distribution, and RF communications., • The Electrical Engineer position requires system-level architects who are also experts in their specialized areas., • As an avionics electrical engineer, you'll take charge of designing and testing custom electrical systems for both ground test and flight applications., • You will ensure the seamless integration and compatibility of your designs at the sub-system and integrated system level., • As a member of the avionics team, you'll have the opportunity to work across disciplines to create control and instrumentation systems for engine, structural, hydraulic, and electrical systems. Minimum Requirements:, • Bachelor's degree in Electrical Engineering, • 1+ years of experience in multiple of the following areas: electrical hardware design, control systems, instrumentation and signal conditioning, digital communication busses, analog design and simulation, power electronics, harness design Preferred Skills and Experience:, • Master's degree in Electrical, Mechanical, Aerospace Engineering or similar disciplines, • Demonstrated project experience with embedded design, device integration, V&V, environmental qualification and/or flight testing, • Familiarity with test and simulation tools (DMM, Oscilloscope, power supplies, SPICE, Ansys), • Experience with electrical and mechanical design and version control software (Altium Designer, Siemens NX, Teamcenter, Capital Harness, Git, Teamcenter), • Experience with avionics devices and protocols (RS-485, ARINC-685, FPGAs, GPS, INS, D38999 style connectors, etc.), • Familiarity with aerospace industry standards (IPC-620, MIL-STD-810, MIL-STD-704, MIL-HDBK-516C, MIL-STD-464D, DO-160G), • Experience working with DC power systems (Batteries, Motors, Generators, etc.), • Strong analysis and troubleshooting skills, • A bias towards action, and a willingness to work hands-on to make it happen, • Engineering project team experienceAdditional Requirements:

Job DescriptionJob Summary: We are seeking a skilled and detail-oriented Project Engineer with a strong background in mechanical and HVAC systems to join our team. The ideal candidate will be responsible for assisting in the planning, design, and execution of HVAC and mechanical projects. This role requires strong problem-solving abilities, technical expertise, and the ability to coordinate with multiple stakeholders to ensure project success. Key Responsibilities: * Assist in the design, development, and implementation of HVAC and mechanical systems for various projects. * Review and interpret engineering drawings, blueprints, and project specifications to ensure accuracy and compliance. * Work closely with project managers, contractors, and clients to coordinate project activities and resolve technical issues. * Prepare technical reports, cost estimates, and project schedules to ensure efficiency and feasibility. * Conduct site inspections and assessments to monitor project progress and quality control. * Ensure compliance with industry standards, local building codes, and safety regulations. * Assist in selecting and procuring mechanical equipment, materials, and subcontractors. * Provide technical support and troubleshooting assistance for HVAC and mechanical installations. * Utilize AutoCAD, Revit, and other design software to support project development. * Maintain accurate project documentation, including reports, change orders, and submittals. Qualifications: * Bachelor's degree in Mechanical Engineering or a related field. * Minimum of 4 years of experience in mechanical and HVAC engineering projects. * Strong understanding of HVAC systems, mechanical design principles, and energy efficiency standards. * Proficiency in AutoCAD, Revit, and other relevant engineering software. * Knowledge of ASHRAE standards, local building codes, and LEED requirements. * Excellent problem-solving, organizational, and communication skills. * Ability to manage multiple projects while maintaining attention to detail. * Familiarity with project management tools and estimating software is a plus. Work Environment: * This role involves working in an office setting with frequent on-site visits to project locations. * May require occasional travel to meet with clients, contractors, and vendors. * Some evening or weekend work may be necessary depending on project deadlines. If you have a passion for mechanical and HVAC engineering and are eager to contribute to high-quality projects, we encourage you to apply for this exciting opportunity.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! SENIOR / PRINCIPAL PROPULSION ENIGNEER As Senior/Principal Propulsion Engineer, you will play a critical role in the development, testing, and operation of the Archimedes Engine family, a cornerstone of the Neutron rocket program. You will take ownership of subsystems and engine operation, driving design, analysis, testing, and operational readiness. You will execute testing campaigns, analyze data, improve existing evaluation capability and refine designs for reliability and vehicle operations. This role demands technical expertise, strong autonomy, and the ability to align teams and projects to achieve program goals. Principal Engineers will additionally drive value to teams outside their group, influencing cross-functional efforts and contributing to the broader success of the Neutron program. WHAT YOU'LL GET TO DO: • Design, analyze, test, fly, and refly next generation propulsion hardware ensuring operational readiness and flight success., • Develop and execute test plans, including qualification and acceptance testing, and conduct post-test data reviews to refine designs and processes., • Collaborate across engineering disciplines to optimize engine performance, reliability, and manufacturability., • Generate high-level plans and prioritize tasks across teams, resolving competing priorities and ensuring alignment with program goals., • Mentor and guide engineers, fostering technical growth and collaboration., • Work with manufacturing, testing and vehicle operation teams to support engine needs, operation, and resolve issues each part of the engine lifecycle. Please note: This position can be hired as a Senior Propulsion Engineer I, Senior Propulsion Engineer II or Principal Propulsion Level. YOU'LL BRING THESE QUALIFICATIONS AS A SENIOR PROPULSION ENGINEER I: • Bachelor's degree in mechanical engineering, aerospace engineering, or related field., • 5+ years of experience in rocket engine development, testing, or operations., • Strong technical understanding of fluid dynamics, thermodynamics, cryogenic systems, and rocket engine architecture., • Familiarity with engine P&IDs, fluid system routing, and hotfire data reviews. YOU'LL BRING THESE QUALIFICATIONS AS A SENIOR PROPULSION ENGINEER II: • Bachelor's degree in mechanical engineering, aerospace engineering, or related field., • 8+ years of experience in rocket engine development, testing, or operations., • Strong technical understanding of fluid dynamics, thermodynamics, cryogenic systems, and rocket engine architecture., • Familiarity with engine P&IDs, fluid system routing, and hotfire data reviews. YOU'LL BRING THESE QUALIFICATIONS AS A PRINCIPAL PROPULSION ENGINEER: • Bachelor's degree in mechanical engineering, aerospace engineering, or related field., • 12+ years of experience in rocket engine development, testing, or operations., • Strong technical understanding of fluid dynamics, thermodynamics, cryogenic systems, and rocket engine architecture., • Familiarity with engine P&IDs, fluid system routing, and hotfire data reviews. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Advanced degree in a fluid mechanics-heavy field., • Experience with ox-rich staged combustion systems and Methyl/LOX propellants., • Background in failure analysis, combustion dynamics, turbopump mechanics, and hydraulics., • Familiarity with reusable rocket engine systems and test/launch facility operations., • Experience with best practices for design, qualification, and production. ADDITIONAL REQUIREMENTS: • Ability to travel to test and launch facilities (~25%)., • Flexibility to work extended hours or weekends as needed., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus., • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$116,000—$225,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job DescriptionDescription: Signia Aerospace is a global, integrated provider of high-performance systems and specialized components for the aerospace industry. Signia designs, manufactures, and services a wide range of products, that include mission equipment, thermal management systems, engine technology, and propellers. The Signia brands are leaders in their respective markets and provide a compelling value proposition to both aerospace and defense OEMs and end-users. Onboard Systems Hoist & Winch, located in Anaheim, CA is one of the world’s leading providers of Search & Rescue (SAR) and Human External Cargo (HEC) advanced mission equipment for civil, commercial, and military helicopters. Position Overview Location: Anaheim, CA (Onsite) Schedule: Monday - Friday The Manufacturing Engineer is responsible for the oversite, assembly, and testing of Hoist & Winch products. This position will provide engineering support for the manufacturing factory by interpreting engineering drawings and specifications into build plans, creating schedules and overseeing nonrecurring and recurring tasks to support program builds. What You’ll Do • Translate engineering design requirements into manufacturing processes, • Create shop orders, work instructions and assembly aids, • Design and implement tooling and test equipment, physical layouts and workflows, • Disposition non-conforming material with root cause and corrective action analysis as required, • Troubleshoot and provide solutions for test issues, • Engage with factory area leads to address systemic issues and provide root cause/corrective action/preventive action to reduce scrap and rework, • Ensure quality, cost, schedule, and inventory goals are achieved in a manner consistent with the overall business plan Who You Are • Bachelor’s degree in science, Technology, Engineering, or minimum 5 years of prior relevant experience supporting production in a manufacturing environment, • Experience with interpretation of technical documentation (i.e. Engineering drawings and specifications), • Experience with the creation of work instructions in a manufacturing environment, • Experience with a shop floor management system (i.e. SAP, PRISM, ERP, MRP, or similar manufacturing software) What’s In It for You • Benefits package including medical, dental, vision, life, disability, • Paid time off and holidays, • 401(k) plan with employer contribution matching, • In addition to offering competitive wages and benefits, Onboard Systems also offers the opportunity to increase your future earnings tied to growth in company performance. We recognize employee contributions toward growing the business through our unique Growth Participation Unit program (GPU). GPUs are tied directly to company growth and reward all eligible employees with cash when the business grows over time. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status Requirements:

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role We are seeking a Senior ASIC Package Design Engineer to implement advanced ASIC package architecture, with a strong focus on flip-chip BGA (FC-BGA) and multi-chip module (MCM) solutions. This role supports the end-to-end package strategy for high-performance mixed-signal and digital SoCs from early architecture and trade studies through vendor engagement, qualification, and production ramp. You will collaborate with internal teams for package design, defining standards, influencing silicon and system architecture, and ensuring first-pass success for complex, high-speed, power-dense ASICs. Responsibilities • Define ASIC package architecture for FC-BGA and MCM solutions, including substrate stack-up, ball-map strategy, power delivery, signal breakout, and mechanical constraints., • Lead package-level trade studies across cost, performance, power integrity (PI), signal integrity (SI), thermal, manufacturability, and reliability., • Establish package design standards, methodologies, and best practices., • Drive detailed design of FC-BGA packages for high-pin-count ASICs with high-speed SerDes, dense power grids, and RF signal content., • Define and review substrate stack-ups, via strategies, impedance control, escape routing, and reference plane planning., • Partner with silicon, RF, and systems teams to co-optimize die floorplans and package interfaces., • Support package-level SI/PI strategy, including high-speed digital interfaces, power delivery network (PDN) design, and decoupling strategy, • Lead thermal architecture at the package level, including lid selection, TIMs, heat-spreaders, and mechanical interfaces to system cooling., • Bachelor's degree in Packaging Engineering, Mechanical Engineering, Electrical Engineering, or a related field., • 5+ years of experience in ASIC package design, with deep expertise in FC-BGA., • Proven experience delivering high-pin-count, high-performance ASIC packages into production., • Strong understanding of substrate technologies and materials, SI/PI fundamentals at the package level, and thermal management for power-dense ASICs., • Fluent in SI/PI and EM simulation tools such as SIWave, HFSS, and ADS., • Experience working directly with OSATs and substrate vendors., • Experience with MCM or heterogeneous integration (chiplets, interposers, advanced laminates)., • Background in high-speed digital or mixed-signal SoCs., • Familiarity with aerospace, space, or high-reliability electronics. Compensation and Benefits: • Base salary range for this role is $180,000 – $260,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Position Summary: The Manufacturing Engineer is responsible for optimizing production lines by designing, implementing, and documenting efficient assembly processes. This role focuses on improving product quality, reducing costs, and resolving technical issues while ensuring manufacturability and safety compliance. Key Responsibilities: • Design and implement efficient assembly and production processes, • Develop and maintain work instructions and process documentation, • Collaborate with design and engineering teams to ensure product manufacturability, • Analyze production performance and identify opportunities for improvement, • Perform root cause analysis and implement corrective actions, • Select appropriate tools, equipment, and production methods, • Troubleshoot technical and production issues, • Drive cost reduction and process efficiency initiatives, • Ensure compliance with safety standards and company policiesQualifications:, • Bachelor's degree in Engineering or related field preferred, • Experience in manufacturing or process engineering, • Strong problem-solving and analytical skills, • Knowledge of lean manufacturing and continuous improvement principles, • Ability to read and interpret technical drawings and specifications, • Strong communication and teamwork skills Job Posted by ApplicantPro

Job DescriptionHermeus is a venture-backed defense aviation company reclaiming the lost art of rapid iterative prototyping to build the fastest aircraft in the world today. By prioritizing relentless hardware iteration, we deliver high-speed systems at the pace of the modern battlefield. We work with the Department of War to provide the high-speed capabilities our nation and its allies need to maintain a durable, asymmetric advantage. As a Structures Design Engineer, you will be responsible for the design, analysis, and delivery of primary and secondary aircraft structures for hypersonic vehicles. You will own hardware from early trade studies through detailed design, manufacturing, integration, and flight test, working closely with propulsion, aerothermal, manufacturing, and test teams. This role requires strong fundamentals in structural design, comfort operating in ambiguous problem spaces, and the ability to move quickly while maintaining engineering discipline. Responsibilities • Design and develop primary and secondary aircraft structures, including fuselage, wings, control surfaces, and supporting structure, • Perform structural trade studies considering weight, strength, stiffness, thermal environment, manufacturability, and cost, • Generate detailed CAD models, drawings, and GD&T for flight and test hardware, • Collaborate with analysis engineers on stress, fatigue, fracture, and thermal-structural assessments, • Work closely with manufacturing to support fabrication, assembly, and tooling development, • Support vehicle integration, ground testing, and flight test activities, including troubleshooting hardware issues, • Participate in design reviews and contribute to system-level architectural decisions, • Drive rapid iteration cycles and incorporate test and flight feedback into design improvements Basic Qualifications, • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related field, • 3+ years of experience in structural design of aerospace vehicles or high-performance mechanical systems, • Proficiency with CAD tools (NX, CATIA, or equivalent), • Strong understanding of structural fundamentals. Preferred Qualifications, • Master’s degree in Aerospace or Mechanical Engineering, • Experience with high-temperature materials, metallic and welded structures, • Familiarity with hypersonic, high-speed, or high-thermal-load environments, • Experience supporting structural testing and/or flight hardware, • Knowledge of aerospace standards, qualification, and verification processes

Job Description About Arena Club If you're fascinated by sports cards and memorabilia, your search ends here. Arena Club is pioneering the collectibles domain by introducing the first-ever digital card show. Spearheaded by 5x World Series Champion Derek Jeter and serial entrepreneur Brian Lee, Arena Club has developed a fully digital marketplace. This innovative platform is built on trust, transparency, and fun, featuring grading & authentication, vaulting, and digital pack openings for collectors to build and showcase their collections in a personalized online showroom from anywhere in the world. About The Role We are seeking a Senior Data Engineer to help strengthen Arena Club's strategic decision-making, enhance operational performance, and integrate data across the company to unlock deeper insights into customer behavior and market performance. As a key individual contributor, you'll focus on building and maintaining reliable data pipelines, improving data quality, and ensuring data is well-instrumented, accessible, and structured to support meaningful analysis. You will work with existing tools and systems, including Mixpanel and AWS-based data infrastructure, partnering closely with engineering and business teams across product, operations, and the marketplace. This is a hands-on role for someone who enjoys owning execution, operating in evolving data environments, and incrementally improving how data is collected, processed, and used to drive better business decisions. What You Will Do Current State — Production Data Warehouse • Maintain and optimize inbound and outbound ETL pipelines built on AWS Glue (Python Shell & Spark ETL), • Manage Redshift cluster performance across various schemas, • Own integrations with SaaS data sources via AppFlow and direct connectors, • Operate outbound distribution pipelines to external vendors, • Manage infrastructure, alerting, and migration state tracking Future State — Medallion Architecture & Real-Time • Lead the migration from ad-hoc SQL scripts to a Bronze/Silver/Gold medallion architecture with dbt as the transformation layer, • Design and implement dimensional models ie fact tables and dimensions, • Build the Silver staging layer, • Architect the real-time CDC pipeline, • Build the Unified Access Layer, • Design and automate Glue jobs, • 5+ years in data engineering with production pipeline ownership (not just analytics or BI), • Deep AWS experience: Glue (both Python Shell and Spark ETL), Redshift, S3, IAM, EventBridge, Lambda, AppFlow, • Strong SQL: complex joins, window functions, MERGE/UPSERT patterns, Redshift-specific optimization (sort keys, dist keys, VACUUM/ANALYZE), • Python fluency: boto3, data processing libraries, writing production Glue scripts (not just notebooks), • Dimensional modeling: star schemas, fact/dimension design, SCD Type 1 and Type 2 implementation, • dbt: hands-on experience building and maintaining staging, intermediate, and mart models with tests and documentation, • Data warehouse operations: schema migration, incremental loads, backfill strategies, monitoring, and alerting Nice-to-Have• Redshift Spectrum: experience with external schemas, Parquet/Hive partitioning, and unified hot/cold querying, • CDC / streaming: Postgres WAL, Debezium, EventBridge, or similar change data capture pipelines, • Data Mesh concepts: domain-oriented ownership, data-as-a-product thinking, federated governance, • AppFlow & SaaS integrations: configuring and troubleshooting managed connectors for Stripe, Zendesk, Mixpanel, etc., • Cost optimization: right-sizing Glue jobs (Python Shell vs. Spark), Redshift concurrency scaling, S3 lifecycle policies, • Vendor distribution: building outbound API sync jobs with rate limiting, SFTP transfers, webhook deliveryBonus• Familiarity with marketplace or e-commerce data (orders, payments, attribution, promo codes)• Experience with Mixpanel, Customer.io, or Singular data exports and event schemas• Prior experience migrating from monolithic ETL to medallion or lakehouse architectures Life at Arena Club isn't for the faint of heart — and that's by design. We're building products and experiences the collectibles world has never seen. This is a proving ground. It demands your best every single day, because anything less means you're falling behind. From day one, you're in the game. Trusted to deliver, expected to own outcomes, and driven to raise the bar higher than you thought possible. We don't just execute — we innovate, compete, and win together. That's how real breakthroughs happen. If you want routine or predictability, you won't find it here. But if you're ambitious, relentless, and hungry to prove yourself on a team built to dominate — step into the arena. You'll discover growth and reward here, unlike anywhere else. The base salary range listed is a guideline. Actual compensation is determined based on skills, experience, and the impact you bring. Total compensation includes base salary, bonus, and equity. Salary Range$130,000—$170,000 USD

Job Description Lead Space Systems Engineer Full time position based in Altadena, CA OffWorld is a robotics startup working on developing a mobile robotic workforce for heavy industrial jobs on Earth, Moon, asteroids & Mars. OffWorld was founded by an experienced engineering team drawing on decades of tackling formidable engineering challenges at NASA, ESA, NOAA, Maxar Technologies, CERN, Reaction Engines, SAFRAN, Surrey Satellites and Cisco. OffWorld’s first challenge is developing and maturing a modular robotic system for extreme environments on Earth. Our robots will go deeper underground and farthest on Earth than humans can, eliminate the need for humans to work in life-threatening environments in mining, construction, tunneling and other dangerous industries, and dramatically reduce the environmental footprint and cost of operations in key economies on Earth and beyond. We have designed a modular robotic architecture that focuses on maximizing the commonality and reusability across components for fast deployment and optimization. Our robotic systems combine sensor information, cutting edge classical/machine learning (ML) algorithms and a robotics real-time system platform for control, decision making and execution. OffWorld seeks a Lead Space Systems Engineer in Altadena, CA. The wage will be at least $120,827/year. Email your resume to . In this role, you will be responsible for performing the lead systems engineering functions in the conception, design, and development of spaceborne systems operating in cis-lunar space. You will initially support the development, launch, commissioning, and operations of a CubeSat Program in Low Earth Orbit, with other projects to follow. You will work with scientists, engineers, project managers, customers, vendors, end users and other stakeholders to identify, develop, and translate science goals and requirements into system requirements and specifications. You will also collaborate with scientists and other stakeholders to perform cost-benefit analysis between science goals and program cost. You will have the opportunity to: • Collaboratively synthesize top level system design concepts and architectures, perform trade studies, and optimize the designs to meet goals and requirements within budget., • Propose, define, and lead Systems Engineering within CubeSat design reviews., • Perform life cycle engineering studies and analysis., • Perform system level validation and verification of instruments to ensure requirements compliance., • Perform risk identification, characterization, and mitigation efforts., • Verify the integrity of analyses performed by other engineers., • Use advanced statistical techniques to define and understand telescope and other instrumentation performance, as well as analyze uncertainties and risk., • Support efforts in technical requirements definition and tracking, system error budgets, and Interface Control Documents (ICDs)., • Support project management and team in ensuring systems engineering tasks are completed in a timely manner., • Develop and document detailed test plans and procedures based on engineering specifications and requirements verification and validation compliance matrices., • Develop specific payload test plans tailored to GFSC-STD-7000 (GEVS)., • Conduct and oversee testing efforts and participate in testing hands on as necessary., • BSc or MSc in Aerospace Engineering, Mechanical Engineering or equivalent., • At least 5 years of professional experience in space systems engineering, as a Program Lead Systems Engineer., • Familiarity with a wide range of latest engineering technologies, including one or more of the following disciplines: software, electrical and mechatronics., • Experience in broad optical-mechanical design including some experience with spaceflight hardware and Cubesat., • Advanced knowledge of instrument alignment methodology and developing alignment fixturing & tooling., • Experience in articulating technical problems and formulating alternative solutions to engineering problems., • Practical hands-on laboratory experience using and working with optical tools and systems., • Advanced knowledge of design and testing for complex new systems that integrate into larger systems., • Experience in working as an effective member of a team of scientists and engineers, with an advanced capability to conduct engineering instrumentation design working in an independent manner as necessary., • Demonstrated experience in writing scientific instrumentation proposals, and in successfully publishing engineering results., • Proven ability to communicate effectively with Principal Investigators, scientific staff and fellow engineers., • Experience in anticipating and defining long-term impacts of design decisions, with the knowledge and skills to mitigate such impacts., • Proficiency in SolidWorks., • Experience in thermal analysis., • Ability and willingness to travel for project deployments, as necessary., • Excellent verbal and written/online communication skills., • Demonstrated ability to manage and organize your work to meet deadlines. Comfortable multi-tasking/working on different projects concurrently., • Self-driven, passionate, and constantly pursuing knowledge and excellence., • Robust medical plan offerings with 0 to limited paycheck deductions, • Dental and vision insurance, • Unlimited Paid Time Off, • Paternal Leave OffWorld is an Equal Opportunity / Affirmative Action employer committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity or any other factor protected by applicable federal, state or local laws. OffWorld is also committed to working with and providing reasonable accommodations to individuals with disabilities. Please let your recruiter know if you need an accommodation at any point during the interview process. Powered by JazzHR t5O8KSodU7

Job DescriptionSpace Systems Integration (SSI) is a fast-growing engineering company that provides aerospace solutions to a variety of government and commercial customers. Our employees are forward-thinking, self-directed individuals who are committed to solving our customers’ technical challenges. SSI is seeking a Space Systems Engineer for a role in El Segundo, CA. Role and Responsibilities include: • Lead technical requirements development, systems engineering, and oversee development contractor to develop, design, produce, integrate and test space systems., • Oversee payload integration and interface control management., • Perform system integration of multiple efforts to integrate complex space systems, ground segment integration, and deployment into operation., • Manage and negotiate interface control documents with external stakeholders., • Perform systems architecting and engineering activities such as system requirements definition, interface definition, design, interface management, data architecture development, systems integration, performance analysis, lifecycle cost analysis & estimation, decision analysis, and development and refinement of concepts of operation., • Oversee requirements verification and validation., • Make program risks assessments and provides actionable recommendations to the chief engineer and program manager., • Independently collaborate with Government program office representatives, FFRDC, SETA, and contractor personnel.Required Qualifications:, • Bachelor of Science or applicable and 9 years or more experience; 4 additional years of experience may be used in lieu of degree., • Experience with technical requirements development, systems engineering, and overseeing development contractor to develop, design, produce, integrate and test space systems., • Experience with requirements verification and validation., • Active TS clearance with in-scope T5/SSBI is required, along with SCI eligibility and participation in Continuous Evaluation. #ssi #weknowhowtobuildit #spacejobs

Job Description Job Summary: The Senior Quality Engineer leads cross-functional quality initiatives across the value chain to ensure robust product realization, compliance, and production readiness. This role is responsible for resolving complex quality issues, interpreting and aligning technical and regulatory requirements, and driving systemic improvements across supply chain, production, and customer performance. Duties and Responsibilities: Complex Problem Resolution & Systemic Improvement • Lead resolution of complex issues across supply chain, internal production, and customer/field performance, • Drive permanent corrective actions using RCCA, eliminating systemic defect drivers and recurring issues, • Lead improvements in process capability, defect reduction, and cost of poor quality (COPQ), • Interpret engineering, customer, and regulatory requirements (AS9100, FAA/EASA, etc.), • Resolve conflicts between design intent, manufacturing capability, and customer expectations, • Define how requirements are translated into process controls and implemented across production and inspection throughout the value chain, • Apply FAA and EASA regulatory requirements (e.g., Part 21, Part 145, POA/DOA frameworks) to production, inspection, and release processes, • Lead quality integration into NPI and production ramp activities, • Ensure processes are scalable, capable, and aligned with production rate requirements, • Lead customer issue resolution including root cause, corrective action, and communication, • Analyze field performance and reliability trends, • Ensure alignment with regulatory and customer requirements across the value chain, • Represent quality in audits and serve as a primary interface with regulatory authorities (FAA, EASA) for audits, inquiries, and approvals, • Lead and influence cross-functional teams to drive alignment and execution, • Communicate complex issues clearly across technical and non-technical stakeholders, • Bachelor’s degree in Engineering or related field (or equivalent experience), • 6–10 years of experience in aerospace or regulated manufacturing environments, • Strong knowledge of:, • Advanced RCCA methodologies, • Engineering drawings and specifications (GD&T), • Aerospace regulatory frameworks (AS9100, FAA, EASA), • Demonstrated ability to:, • Interpret and reconcile complex technical and regulatory requirements, • Apply regulatory requirements into production, inspection, and release processes, • Lead cross-functional teams to resolve complex problems, • Drive systemic improvements across multiple areas of the value chain, • Influence without direct authority and build alignment across organizations, • Communicate effectively with technical teams, leadership, customers, and regulators, • Experience:, • Direct experience working with regulatory agencies (FAA and/or EASA), including audits, approvals, or compliance activities, • Experience operating within approved environments (FAA Part 21, Part 145, EASA Part 21G/21J), • Experience supporting or operating within a Production Organization Approval (POA) or equivalent, • Strong analytical, leadership, and decision-making skills Benefits The starting pay range for this position is $97,500 - $117,000 per year however, base pay offered may vary depending on the level of the position, skills, experience, job-related knowledge, and location. In addition to a comprehensive package of health benefits that include company contributions, RAVE Aerospace offers a variety of additional benefits and perks to enhance your work-life balance experience including but not limited to: • Discretionary bonus program, • Future financial security with a 401(k) program with company match, • Paid time off covering vacations, personal time off and sick days, capped off by an exciting year-end holiday shutdown, • Embraced flexibility with our alternative work schedule (9/80) to navigate your workweeks with every other Friday off

Job DescriptionAbout Us At Arbor Energy & Resources Corporation ("Arbor Energy"), we're creating technology to power our lives while protecting the planet that sustains them. Our advanced power systems deliver clean, reliable baseload electricity with zero operating emissions—modular, fuel-flexible, and engineered for the realities of today's energy demand. At the core is a supercritical CO₂ turbine with integrated carbon capture, designed to bring carbon-neutral power online quickly at meaningful scale. Our team includes aerospace engineers, combustion experts, and systems thinkers with a shared goal: to build technology worthy of the world we want to live in. While many of us began our journeys looking to the stars, we're applying that expertise here at home to deliver dependable, emission-free baseload power and a future of lasting abundance. If you share our values and are drawn to rigorous work with lasting impact, we'd love to learn more about you. Come build what the future will run on. Steward our planet: We build for tomorrow, ensuring every bolt we tighten and every hand we lend leaves our environment stronger than we found it. Lead with Love: We champion the success of our people, partners, and planet, nurturing excellence through camaraderie and rigor. Explore the Uncharted: We embrace the unknown with curiosity, using courage and discipline to transform uncertainty into opportunity. Role Overview We are seeking a Mechanical Design Engineer for our Combustion team to own the 3D design of high-temperature, high-pressure hardware from concept through fabrication. You'll collaborate closely with combustion engineers, analysts, and test engineers to develop practical, test-ready systems. Your work will leverage metal additive manufacturing, precision machining, and algorithmic design techniques to push the boundaries of modern fabrication. Responsibilities • Lead detailed 3D modeling of complex components and assemblies., • Apply Design for Additive Manufacturing (DfAM) principles to optimize performance, cost, and manufacturability., • Create complete drawing packages with GD&T, assembly documentation, and bill of materials (BOMs)., • Translate engineering requirements into practical, buildable designs., • Generate work instructions and collaborate with technicians during builds and test campaigns., • Continuously iterate based on feedback from analysis, testing, and fabrication. Requirements, • Bachelor's degree in Mechanical, Aerospace, or a related Engineering discipline., • 3+ years of experience in mechanical design of high-performance systems., • Proficiency in CAD software (Siemens NX preferred; others such as SolidWorks or Creo also acceptable)., • Experience producing fully detailed drawing packages including GD&T and manufacturing specs., • Experience with additive manufacturing and DfAM principles., • Understanding of additive constraints: overhang angles, support strategy, build orientation, powder removal, etc. Preferred Qualifications, • Exposure to material behavior and surface finish considerations in high-temperature AM alloys (e.g., Inconel 625/718, Hastelloy, Haynes)., • Familiarity with FEA or fluid/thermal analysis workflows., • Prior experience in a fast-paced, hands-on R&D or startup environment., • Exposure to combustion systems, high-temperature materials, or pressure vessels. Compensation & Benefits, • Pre-IPO stock options, • Medical, dental, and vision insurance (Arbor covers 90% for employees), • Basic life insurance fully covered, • Health savings account (HSA) with matching, • Flexible savings account (FSA), • Unlimited PTO, • 12+ company holidays, including Earth Day!, • 401(k), • Commuter benefits, • Annual learning and development stipend Our hiring process is designed to be accessible, fair, and focused on the work that matters most for this role. Reasonable accommodations are available throughout the hiring process and employment—please let us know if you need one.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Dental insurance, • Flexible schedule, • Health insurance, • Paid time off, • Profit sharing, • Training & development, • Vision insurance AURIGA JOB POSTING (Auriga Website: ) Auriga Corporation was established in 1990, to provide high-quality design, engineering and project management services for Electric Power, Telecommunication and Information Technology systems. Aurigas cliental includes: investor owned and municipal utilities, rail and transit agencies, federal, state and local government agencies, and international public and private sector organizations. Auriga Corporation is looking for an experienced, talented and self motivated individual to join our team to help us provide our customers with innovative and cost effective solutions and services. An ideal candidate will be excited to be part of a company that moves quickly on a constant flow of ideas, is able to wear multiple hats as needed, and has the drive to succeed. Auriga Corporation currently has following vacancies in the Los Angeles, California Office: Senior Cybersecurity Engineer Job Responsibilities: • Assist with security strategy updates addressing the evolving risk landscape., • Assist with security governance, aligned to NIST CSF, as required to sustain an effective cybersecurity program., • Assist with 3rd parties/projects/initiatives security risk assessments and provide solutions recommendations as needed., • Assist with security operations management update/improvement as required., • Manage information security-related activities of the agency including the analysis, identification, estimation of InfoSec efforts and the development, planning, testing, and documenting of remediation measures., • Develops, conducts, and documents executive-level reporting and strategy formulation., • Creates and maintains a centralized information security register to manage all InfoSec information and document changes relevant requirements., • Collaborates with internal and external stakeholders to maintain an understanding of current risks, new systems, and changes to the environment., • Supports development, implementation, and maintenance of strong security risk & compliance processes for new and existing deployments., • Participates in vendor due-diligence processes and third-party security risk management efforts; in addition to performing contract reviews as it relates to Information Security., • Supports internal and external audit and assessment processes for relevant compliance (PCI DSS, Privacy, etc.)., • Creates security guidelines, checklists, and other documentation to support projects and initiatives., • Develops and presents metrics, reports, and dashboards., • Develops documentation for information security controls, acquisitions, and process or system changes., • Bachelors degree in a related field., • 15+ Years experience with large organizations., • Experience working with a transit Universal Fare System (UFS) and the Cubic Payment Application (CPA) as it relates to transportation agency data compliance., • Knowledge of cybersecurity technology and compliance in transit systems., • Demonstratable strong background in the processes, policies, procedures, systems, practices, and professional standards of cybersecurity., • Demonstratable knowledge of industry best practices and relevant legal requirements as they pertain to cybersecurity, compliance, and privacy laws and regulations including TSA/DHS transport directives, DMV rules and regulation and other transportation agency cyber security rules and regulations., • Consultant must have delivered similar services (as stated above) during the past 10 years., • Experience with modern Security Operations Center (SOC) monitoring, detecting, analyzing, and responding to cyber threats., • Experience with conducting Cyber forensics., • Experience with major Cyber Incident handling., • Experience with preparing and guiding organizations to achieve and sustain compliance with Payment Card Industry Data Security Standard (PCI DSS)., • Experience with vulnerability scanning, penetration testing, etc. using commercial products., • Experience with risk-based prioritization of security vulnerabilities and providing actionable remediation guidance., • Experience with cloud based and on-premise Security Information and Event Management (SIEM) tools including administering the tools, reviewing alerts, and providing actionable steps., • Experience with Security Orchestration, Automation, and Response (SOAR) platform., • Two of the certifications below:, • Certified Information Systems Security Professional (CISSP), • Certified Information Systems Auditor (CISA), • Certified Information Security Manager (CISM), • GIAC Security Professional (GSEC), • Certified Data Privacy Solutions Engineer (CDPSE), • Cyber Security Nexus (CSX)Auriga is an Equal Opportunity Employer. Auriga provides compensation and benefits commensurate with the qualifications and experience.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior GNC Engineer I to our team. If you are great at what you do, enjoy working in a startup environment, and are passionate about developing GNC systems for leading-edge spacecraft, and aerospace communication systems, we would like to hear from you. In this position, you will draw on your experience on previous spacecraft to operate on a small team in the design and analysis of GNC systems for CesiumAstro satellites and payloads. You will be responsible for Guidance, Navigation, and Control through all stages of design, integration, test, and operations. As such, you will perform trade studies, lead design reviews, create models, and complete simulations and system testing. You will build, test, and fly hardware and software. As a CesiumAstro spacecraft team member, you will work on a small team to develop satellites and put them in orbit. Your work will have a direct impact on the success of the company. You will work closely with the engineering team, program management to ensure the successful build and launch of our satellite. Element will be the largest, most powerful rideshare satellite in LEO. We’re launching eight of them in the next four years, starting with our first launch this year. Together, our small team will design, build, and iterate to reduce mass and cost while increasing performance, reliability, and manufacturability of a new generation of satellites. Let’s build! JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • Master of Science (MS), or Doctorate (Ph.D.) degree in Aerospace Engineering from an accredited university or institution, • Minimum of 6 years of industry experience in satellite attitude and orbit systems, • Expertise in attitude estimation, guidance, and control; coordinate frame transformations; linear algebra; and non-linear systems, • Experience with multiple spaceflight missions from concept to operations, • Experience in low earth orbit satellites, • Experience with post-CDR test failures and on-orbit failures that guide your design and test philosophies, • Experience with successful and unsuccessful recovery from on-orbit failures, • Experience in conceptualization, architecture design, requirements specification, design, test, and operations of various GNC architectures and components, • Familiarity with space mission simulation tools such as STK, Basilisk, GMAT, or FreeFlyer, • Experience defining spacecraft trajectories and orbital requirements, • Fluency with Python and C++, or other modeling languages, • Familiarity with spacecraft mission design including events, pointing modes, maneuver planning, and operations, • Excellent written and verbal communication skills PREFERRED EXPERIENCE, • A focus on satellite navigation, orbit determination, and propulsive maneuvers, • CubeSat and SmallSat experience, • Hands-on experience with spacecraft instrumentation, subsystems, and test labs, • Experience with multiple mission simulation and flight architectures which drives your vision for the next generation of space software, • Experience in LEO, MEO, GEO, and deep space satellites

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role: As a Supplier Manufacturing Readiness Engineer, you will own our Manufacturing Readiness Review (MRR) and Design for Manufacturability (DFM) processes for all Atlas-platform jobs. You will act as the primary technical liaison between Hadrian and a network of CNC machining and related commodity suppliers, ensuring parts launch on time and at cost. Your work directly reduces quality and delivery risk for mission-critical aerospace and defense programs. What You’ll Do: * Serve as the technical interface between Hadrian and external suppliers; provide real-time support on machining, sheet-metal, and similar processes. * Own and continuously improve the MRR workflow, scaling it from critical orders to 100 % of Atlas orders. * Lead supplier-side DFM reviews and offer actionable feedback to Engineering and customers during sales calls. * Conduct structured root-cause analysis and corrective-action planning to resolve quality or delivery issues. * Analyze supplier manufacturing methods, tooling, fixtures, and in-process inspection; recommend and track improvements. * Identify, evaluate, and onboard high-performing suppliers in partnership with Sourcing and Supplier Quality Engineering (SQE). * Use Six Sigma and other data-driven tools to monitor trends and drive part-performance improvements. * Travel to supplier sites for hands-on issue resolution and process validation (up to 40 %). * Maintain compliance with AS9100 and other aerospace quality-system requirements; support audits and recovery plans. * Document all activities in Hadrian DFM, Atlas, Airtable, and related systems in a timely manner. Required Qualifications: * Bachelor’s degree in Mechanical, Manufacturing, Industrial Engineering or a related discipline or equivalent practical experience. * 3+ years of experience in supplier quality, manufacturing engineering, or industrialization for complex machined and/or sheet-metal parts. * Proven ownership of MRR, PPAP, FAI, or comparable production-readiness processes. * Demonstrated expertise in root-cause analysis, corrective-action planning, and hands-on supplier support. * Working knowledge of AS9100 or ISO 9001 quality-management systems. * Proficiency with DFM tools, manufacturing data analysis, and collaboration software (e.g., Hadrian DFM, Atlas, Airtable, spreadsheets). * Ability to travel domestically up to 40 % of the time and to perform shop-floor activities while wearing required PPE. * Excellent written and verbal communication skills; able to explain technical concepts to non-technical stakeholders and customers. What will set you apart: * Experience supporting aerospace or defense production programs. * Six Sigma Green- or Black-Belt certification. * Familiarity with Geometric Dimensioning & Tolerancing (GD&T) and advanced metrology. * Prior involvement in supplier onboarding and capability assessments. * Experience deploying manufacturing-readiness or DFM processes in a SaaS or cloud-based environment. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job DescriptionLong Wall Company was created in 2024 to accelerate missile defense technology for the U.S. and our allies. Building on the RS1 and GS0 launch systems, Long Wall develops containerized, mass-producible missile defense systems and offers rapid, low-cost flight testing. We believe that the future of global security and stability require defensive technology that is lower cost, higher performing, better tested, and more broadly distributed than is possible today. Join us. What we look forMission-Driven Problem Solvers. The aerospace frontier demands ingenuity. We want Team members who approach challenges with curiosity, embrace failure as a learning opportunity, and stay focused on delivering the best solution for the mission. Total Ownership. We seek staff and engineers who take full responsibility for contributing to and delivering flight-ready work while recognizing that no one succeeds alone. The best engineers, corporate professionals, and technicians make their teammates better. Knowing that complementary skills create force multiplication and drive mission success. SR. ELECTRONICS DESIGN ENGINEERAs a Sr. Electronics Design Engineer, you will lead the design, development, build, testing and commissioning of electrical systems for missile defense technologies at Long Wall. You will have the opportunity to be a key member of a small team of mechanical, fluid, and electrical engineers working to develop innovative deployable missile defense solutions. This individual will be responsible for electrical design, test and integration, from concept to production, while ensuring alignment with strategic business goals. This is a responsible engineer role that contributes to every mission and every flight we fly as we continue to reimagine the future of missile defense systems.RESPONSIBILITIES: • Rapidly design, develop and test highly reliable electronics for communicating with our Platforms., • Drive electrical architecture, specification, component selection, schematic capture, circuit board layout design, implementation, low level firmware development, verification, board bring up and debugging., • Partner with software, mechanical, thermal, manufacturing teams and production test teams., • Derive engineering justification to resolve production issues throughout assembly, test, and vehicle integrationBASIC QUALIFICATIONS:, • Bachelor’s degree in electrical engineering or similar field AND 8 years of relevant experience., • or Master’s degree AND 6 years of experience., • or PhD AND 3 years of experience, • Relevant Experience: working in space, aerospace, or equivalent professional environments with direct hands-on experience developing complex electrical power conversion systems.PREFERRED SKILLS AND EXPERIENCES:, • Min. 5+ years of professional experience rapidly designing and delivering highly reliable products., • Min. 5+ years of electronic product experience designing hardware from concept through production; strong emphasis on full life cycle development of new hardware products and not small incremental updates to legacy hardware., • Min. 5+ years of experience designing and implementing mixed-signal circuit host boards from concept through production using processors, FPGAs, SoCs, SoMs. Experience implementing Ethernet, multi-GHz SerDes, DRAM interfaces (DDR4), PCIe, I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components., • Min. 5+ years of professional experience testing, troubleshooting and debugging electronics., • Experience working in military or aerospace industries with a strong background in MIL-STD-461, 464, 810, DO-160 compliance, or similar industrial/automotive standards., • Strong understanding of computers and programming languages (Python, C/C++)., • Demonstrated ability to work in a highly cross-functional role., • Self-starter with demonstrated experience on multiple projects making hardware work within demanding time and resource constraints, • Excellent communication skills both written and verbal.GENERAL REQUIREMENTS:, • Ability to sit or stand for extended periods of time, • Ability to use a computer to complete assignments, • Ability to communicate with individuals and groups in person, by phone and telepresence, • Ability to pick up to 50lbs, • While performing the duties of this job, the employee will typically work in an office environment, • Ability to travel up to 25% of the timeThis is the lowest-to-highest compensation range we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee’s pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. In addition to base pay and equity, we offer:, • Heavily employer-subsidized medical, dental, and vision insurance plans, • Long Wall paid life insurance and LTD coverage, • 4% 401k match, • Student loan repayment assistance program, • Paid parental leave, • Family planning assistance program, • Long Wall paid financial wellness program, • Paid time off for non-exempt employees and flexible vacation policy for exempt employeesITAR RequirementThis position requires access to information protected under US export control laws, including the International Traffic in Arms Regulations and/or the Export Administration Regulations. As such, US person status (including US citizens, U.S. permanent residents, individuals granted U.S. asylum status, or individuals admitted in U.S. refugee status) is a required qualification for this position. Equal Opportunity EmployerWe are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, disability, genetics, or citizenship status (when otherwise legally authorized to work and access export-controlled data) and will not be discriminated against on the basis of such characteristics or any other status protected by the laws or regulations in the locations where we operate. We encourage applicants of all ages.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! MANUFACTURING ENGINEER II / SENIOR - FLUID SYSTEMS Based out of Rocket Lab's headquarters in Long Beach, CA the Manufacturing Engineer - Fluid Systems will develop, implement, and continuously improve the propulsion component, assembly, and integration manufacturing process through strong working knowledge of additive manufacturing, machining, welding, assembly, integration, tooling, test, and quality techniques. WHAT YOU'LL GET TO DO: • Develop, perform, and qualify precision welding and fabrication of tubing components according to aerospace specifications., • Utilize TIG, MIG, OTW and other welding methods to achieve the required structural integrity., • Conduct thorough inspections of welded components, employing NDE/NDT methods to identify and rectify defects., • Collaborate with engineering teams to interpret and implement design specifications., • When required, lead problem containment and root cause/corrective action investigations, • Quickly analyze and resolve manufacturing discrepancies and non-conformances, • Collaborate with the quality team to identify and drive quality-related initiatives and improvements, • Liaison between production, quality, supply chain and design engineering staff for complex problem solving and process changes, • Identify, plan and execute capital equipment, machine, and layout upgrades to meet production requirements, including preparation of business cases, • Lead the continuous improvement process via Lean/Six Sigma tools and techniques, • Develop, introduce, and maintain new planning, production, quality, ERP, data collection and analysis, and other processes where none exist (This position can be hired as a Manufacturing Engineer II or Senior Manufacturing Engineer Level) YOU'LL BRING THESE QUALIFICATIONS AS A MANUFACTURING ENGINEER II - FLUID SYSTEMS: • Bachelor's degree in mechanical engineering, manufacturing engineering, aerospace engineering, or other engineering discipline, • 2+ years of experience developing and introducing fabrication methods such as OTW, TIG, proof testing and cleaning, • Experience setting up and/or operating a tube shop or build area YOU'LL BRING THESE QUALIFICATIONS AS A SENIOR MANUFACTURING ENGINEER – FLUID SYSTEMS: • Bachelor's degree in mechanical engineering, manufacturing engineering, aerospace engineering, or other engineering discipline, • 5+ years of experience developing and introducing fabrication methods such as OTW, TIG, proof testing and cleaning, • Experience setting up and operating a tube shop or build area THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • 8+ years of experience developing and introducing fabrication methods such as OTW, TIG, proof testing and cleaning, • Ability to create and deliver accurate and concise presentations for design, manufacturing, and quality, • Strong knowledge of metal working and fabrication processes, • Experience designing tooling in an aerospace manufacturing environment, • Hands-on with a passion for continuous improvement and building the best hardware, • Capable of solving complex problems with little to no supervision in a timely manner, • Adaptable and comfortable in an exciting, dynamic and ever-evolving environment ADDITIONAL REQUIREMENTS: • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus., • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing., • Must be physically able to commute to buildings, • Occasional exposure to dust, fumes and moderate levels of noise. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$100,000—$165,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job DescriptionAbout Us At Vast.ai, we value creativity, energy, drive and teamwork. We are looking for talented people who share these values to join as we grow our team. Our vision is to widely distribute AI computing to reshape our future for the good of humanity. Come join us. If witnessing the birth of AGI excites you, we can't wait to hear from you! Vast.ai is a market based cloud computing platform focused on reducing the cost and friction of compute-intensive workloads, enabling anyone to easily leverage large-scale GPU liquidity. Vast.ai is the market leader for low cost GPU rentals. Our GPU marketplace powers AI projects and businesses all over the world. NOTE: Currently hiring for onsite work at the Vast.ai HQ in Westwood, Los Angeles. About the Role We are seeking a skilled Security Engineer to join our dynamic team. We hire people with broad skill sets who also exhibit deep expertise. The ideal candidate will have experience in both offensive and defensive security, strong software development skills, and deep knowledge of Linux systems and containerization. This role provides the opportunity to work on cutting-edge GPU cloud technologies, tackle complex security challenges at scale, and directly enhance the resilience and trustworthiness of our infrastructure and services. You Are • A problem-solver who thrives in a fast-paced environment, • Committed to continuous improvement and staying updated with the latest security practices and cloud technologies, • A team player with strong communication skills, able to bridge the gap between development and securityResponsibilities, • Collaborate with Operations Team: Partner with our operations team to ensure compliance with relevant standards such as SOC 2, ISO 27001, and GDPR, • Secure Architecture Design: Develop and implement secure architectures for our GPU cloud platform, • Security Assessments: Conduct security assessments, threat modeling, code reviews, and penetration testing, • Security Improvements: Develop and implement security fixes and improvements in collaboration with engineering teams, • Security Tools Management: Implement and manage security tools and systems, including SIEM, WAF, and EDR, • Documentation: Create and maintain security documentation, including policies, procedures, and technical guidelines, • Security Training: Provide security guidance and training to engineering teams to foster a security-first culture, • Incident Response: Participate in incident response activities and contribute to post-incident analysis and improvementsRequired Qualifications, • Educational: Bachelor's degree in Computer Science, Cybersecurity, or a related field., • Programming: Strong programming skills in at least one language, ideally Python or C., • Linux and Virtualization: Extensive knowledge of Linux kernel internals, containerization technologies, and virtualization, • Isolation Techniques: Deep understanding of workload and network isolation techniques in multi-tenant environments, • Cloud Security: Experience in securing and hardening cloud infrastructure, particularly in environments with untrusted workloads, • Network and Application Security: Strong background in network security, application security, and cloud-native security practices, • Security Testing Tools: Experience with security testing tools and methodologies, such as OWASP, Burp Suite, and static/dynamic analysis tools, • Cybersecurity Frameworks: Familiarity with common cybersecurity frameworks, including SOC 2, NIST, and CIS ControlsPreferred Qualifications, • Security Certifications: Relevant security certifications such as CISSP, CCSP, or OSCP., • DevSecOps Experience: Experience with DevSecOps practices and tools in cloud environments., • Regulatory Compliance: Familiarity with regulatory compliance requirements for operating cloud services. The following table will give you an idea of an expected annual total compensation based on experience: 5 years: $145,000 10 years: $185,000 Benefits • Comprehensive health, dental, vision, and life insurance, • 401(k) with company match, • Meaningful early-stage equity, • Onsite meals, snacks, and close collaboration with founders/tech leaders, • Ambitious, fast-paced startup culture where initiative is rewarded

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions. SENIOR PROPULSION SYSTEMS ENGINEER I/II We are currently seeking a Senior Propulsion Systems Engineer I/II for our systems engineering team based out of Long Beach, CA. As a Propulsion Systems Engineer, you are responsible for system-level and component-level ownership of space systems propulsion and fluidic development. These teams support our Space Systems division, and lead cutting-edge programs for civil, commercial, and defense customers. Systems engineers are responsible for the development and maintenance of technical budgets, requirements definition, test planning and execution, and overall management of the systems engineering process. They also work hands-on with flight hardware, and drive the technical development of our Space Systems missions. (Please note: this position can be hired at the Senior Propulsion Systems Engineer I or Senior Propulsion Systems Engineer II level) WHAT YOU'LL GET TO DO: • Technical problem solving, review, and documentation, • Manage technical risk within the individual's scope, • Communicate effectively with leadership and other team members, • Own project requirements, • Design, analyze, test, and fly next generation propulsion and fluidics hardware, • Report on design, analysis, and test findings, • Work with an experienced team of propulsion experts to develop high performance, reliable, and low-cost hardware, • Work with manufacturing teams to support fabrication, design for manufacturability, and resolve issues that may arise during hardware build., • Communicate with vendors to ensure system requirements are met QUALIFICATIONS YOU'LL BRING AS SENIOR PROPULSION SYSTEMS ENGINEER I: • Bachelor's degree in engineering, (software, computer, electrical, aerospace, mechanical, or other technical engineering discipline), • 5+ years of engineering experience in the aerospace industry, • Experience with end-to-end rocket engine or spacecraft propulsion system development and operation, • Experience working on propulsion systems utilizing different storable propellants, such as electrical and chemical, • U.S. citizenship required, due to program requirements QUALIFICATIONS YOU'LL BRING AS SENIOR PROPULSION SYSTEMS ENGINEER II: • Bachelor's degree in engineering, (software, computer, electrical, aerospace, mechanical, or other technical engineering discipline), • 8+ years of engineering experience in the aerospace industry, • Experience with end-to-end rocket engine or spacecraft propulsion system development and operation, • Experience working on propulsion systems utilizing different storable propellants, such as electrical and chemical, • U.S. citizenship required due to program requirements THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Knowledge of heat transfer, fluids, and structural mechanics, • Fundamental understanding of mechanical design principles, • Siemens NX and Teamcenter proficiency, • Experience with Jama or other requirements management software, • Experience with GD&T and engineering drawings, • Familiarity with NI software and instrumentation hardware, • Experience with testing and troubleshooting flight hardware, • Strong understanding of systems engineering, hardware development processes, and configuration management ADDITIONAL REQUIREMENTS: • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus., • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing., • Must be physically able to commute to buildings Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$125,000—$175,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. About the team: The factories-as-a-service team analyzes our current customers' production and supply chain challenges, builds data-driven presentations, designs and scopes factories of the future, and assists the Federal and Strategic sales team in forming long-term partnerships with the DOD, Primes, and other manufacturers. This team is responsible for scoping, design, cost, schedule, and technology analysis, as well as proposals for major programs and manufacturing transformations across all manufacturing methods and domains. With several major programs in flight, we are hiring rapidly for this team that will effectively analyze, design, scope, plan, and handover (or join) execution of large-scale manufacturing efforts. About the Role: We’re looking for an early-career Manufacturing Engineer to join our Factories as a Service team—an initiative focused on building, modernizing, and scaling advanced manufacturing systems across aerospace, defense, and critical infrastructure. In this role, you'll support the design, development, and ramp-up of factory lines across multiple processes. You’ll collaborate with senior engineers, automation teams, and program leads to review technical drawings, evaluate manufacturing feasibility, and contribute to production and inspection workflows. This is a high-growth opportunity for someone who’s excited to work across disciplines, develop core manufacturing skills, and help solve real-world industrial challenges. What You’ll Do: * Review part and assembly drawings to assess manufacturing feasibility * Assist in developing production workflows and tooling requirements * Support CapEx research, equipment evaluation, and vendor coordination * Provide technical input to automation and inspection planning What We’re Looking For: * 1–3 years of experience in a manufacturing or industrial engineering environment * Comfortable reading mechanical drawings and applying DFM principles * Strong problem-solving mindset and eagerness to work hands-on * Interest in building modern manufacturing systems and processes * Willingness to travel (~25%) for site visits and vendor interaction What Will Set You Apart: * Exposure to high-mix/low-volume production environments * Familiarity with CNC machining, additive, assembly, or precision manufacturing * Interest in robotics, automation, or systems integration For this role, the target salary range is $125,000-$175,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role We are seeking a Principal ASIC Package Design Engineer to lead advanced ASIC package architecture and execution, with a strong focus on flip-chip BGA (FC-BGA) and multi-chip module (MCM) solutions. This role owns the end-to-end package strategy for high-performance mixed-signal and digital SoCs from early architecture and trade studies through vendor engagement, qualification, and production ramp. You will operate as the technical authority for package design, defining standards, influencing silicon and system architecture, and ensuring first-pass success for complex, high-speed, power-dense ASICs. Responsibilities • Own ASIC package architecture for FC-BGA and MCM solutions, including substrate stack-up, ball-map strategy, power delivery, signal breakout, and mechanical constraints., • Lead package-level trade studies across cost, performance, power integrity (PI), signal integrity (SI), thermal, manufacturability, and reliability., • Define long-term packaging roadmap aligned with future ASIC nodes, bandwidth scaling, and multi-die integration., • Establish organizational package design standards, methodologies, and best practices., • Drive detailed design of FC-BGA packages for high-pin-count ASICs with high-speed SerDes, dense power grids, and RF signal content., • Define and review substrate stack-ups, via strategies, impedance control, escape routing, and reference plane planning., • Partner with silicon, RF, and systems teams to co-optimize die floorplans and package interfaces., • Own package-level SI/PI strategy, including high-speed digital interfaces (e.g., SerDes, JESD, Interlaken), power delivery network (PDN) design, and decoupling strategy, • Lead thermal architecture at the package level, including lid selection, TIMs, heat-spreaders, and mechanical interfaces to system cooling., • Serve as the primary technical interface to substrate vendors, assembly houses, and OSATs., • Bachelor's degree in Packaging Engineering, Mechanical Engineering, Electrical Engineering, or a related field., • 10+ years of experience in ASIC package design, with deep expertise in FC-BGA., • Proven experience delivering high-pin-count, high-performance ASIC packages into production., • Strong understanding of substrate technologies and materials, SI/PI fundamentals at the package level, and thermal management for power-dense ASICs., • Fluent in SI/PI and EM simulation tools such as SIWave, HFSS, and ADS., • Experience working directly with OSATs and substrate vendors., • Experience with MCM or heterogeneous integration (chiplets, interposers, advanced laminates)., • Background in high-speed digital or mixed-signal SoCs., • Familiarity with aerospace, space, or high-reliability electronics., • Experience defining packaging strategy from early architecture through first silicon and volume ramp., • Base salary range for this role is $200,000 – $280,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Company Overview Rangeview is on a mission to build the foundry system that reindustrializes America. We exist to break the legacy manufacturing trap by reinventing critical production for the twenty‑first century. Through advanced software, deep automation, breakthroughs in materials science, and modern financing strategies, Rangeview rewrites both the cost curve and the power structure of making metal parts. Job Summary As a Mechanical Automation Engineer, you will design, develop, document, test, and commission automated manufacturing equipment. A successful candidate for this role will demonstrate determination, integrity, curiosity, and technical capability. We are currently hiring for L1(entry level) - L3IC (Senior). Job Responsibilities • Design and develop manufacturing equipment from concept to production,, • Evaluate, qualify, and engage with vendors for components, subsystems, and entire pieces of manufacturing equipment., • Perform failure mode analysis to ensure equipment is safe, reliable, and performant, • Collaborate with Production, M&P, and other peer teams to ensure alignment of projects to business goals, • Resolve issues encountered in production. Develop and test engineering changes as necessary., • Ensure equipment meets requirements for throughput, quality, safety, footprint., • Identify and drive improvement projects to improve current manufacturing process, • 2+ years of engineering experience in aerospace, automation, and/or manufacturing, • Bachelor's degree in Mechanical, Mechatronics, or similar Engineering discipline, or demonstrated equivalent experience., • Familiarity with other mechanical design tools (CAD, FEA, PLM, etc.), • Hands on experience in a manufacturing environment, • Strong Mechanical Design Skills (materials selection, statics/dynamics, tolerancing, component selection, etc.), • Experience with investment casting, vacuum melting & casting, heat treatment, ceramics manufacturing, or similar, • Familiarity with SLA printers, furnaces or high-vacuum systems., • Familiarity with highly regulated production environments and safety-critical equipment, • Familiarity with industrial controls (PLC, HMI, common controls components), • Has had ownership over automated equipment builds. Please note that the salary information shown below is a general guideline. Salaries are based on demonstrated candidate experience and qualifications, as well as market and business considerations. • Level 1 : $90,000-$110,000 plus equity, • Level 2: $108,000-$132,000, plus equity Rangeview offers a competitive benefits package, including unlimited PTO, medical, dental, and vision insurance. Compliance Rangeview is a DDTC-registered, ITAR-compliant business. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Rangeview is an Equal Opportunity Employer; employment with Rangeview is governed on the basis of merit and aptitude and will not be influenced in any manner by any legally protected status.

Job DescriptionCloud and Storage Engineer Employment Type: Full-Time, Experienced Department: Information technology CGS is seeking a Cloud and Storage Engineer to develop and implement full-scale Storage Area Network (SAN) architecture for a large EMC-based SAN infrastructure in support of a large federal agency. The ideal candidate will be able to excel in a fast-paced environment and successfully produce standards and implementation processes for storage configuration, optimization, replication, and storage security. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Develops and implements full scale Storage Area Network (SAN) architecture for a large EMC-based SAN infrastructure in a multi-enterprise, complex, geographically dispersed solution; ranging from single servers to multi-tier, multi-platform solutions connected through fiber channel to multiple EMC Storage Arrays with petabytes of storage capacity. - The SAN architecture considers the following aspects relating to SAN: performance, capacity, replication, disaster recovery, backup disk storage, and backup & recovery.- Defines and sets a strategic direction for the SAN and backup environment. - Designs and implements customer storage requirements into an enterprise solution that will be developed, installed, configured, and deployed in the environment. - Provides overall storage and backup capacity planning, and utilization reporting. - Produces standards and implementation processes for storage configuration, optimization, replication, virtualization, storage security, and disaster recovery.- Troubleshoots complex SAN infrastructure issues and works with customers both internal and external to effectively resolve issues.- Reviews, plans, and participates in executing regularly scheduled maintenances and/or projects on the storage infrastructure. - Develops technical documentation, tiered storage and storage-as-a-service roadmaps, presentations, and cost models.- Responsible for managing, maintaining, and developing the SAN infrastructure as part of a team to ensure 24/7/365 uptime. - Architects and maintains private cloud environment. Professional experience with Gov Cloud (AWS, Azure, etc.) and hybrid cloud architectures desired. - Performs security related tasks which include, but are not limited to, documentation, vulnerability scan review, assessment support, patch management, and auditing as required. Qualifications:- Bachelor’s in computer science, business, or other relevant discipline.- Eight (8) years of relevant work experience may be substituted for degree requirement.- Must have significant, direct experience in Dell EMC products such as OneFile System (OneFS), MDS SAN switches, storage arrays (Unity, Isilon, VNS, and Data Domain), and RecoverPoint. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation! Explore additional job opportunities with CGS on our Job Board: For more information about CGS please visit: or contact:Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team and pushing the boundaries of humanity with a clean sheet, reusable launch vehicle, this is your opportunity! MECHANCIAL ENGINEER II - NEUTRON AVIONICS Based out of Rocket Lab's headquarters in Long Beach, CA, the Mechanical Engineer II, Neutron Avionics, is responsible for the development and implementation of mechanical designs and packaging solutions for the electronics that power Neutron. From cradle to grave, you will create the mechanical components that enable the avionics across the vehicle, including on the Archimedes engine, GNC sensing and computing, and the explosive flight safety system, to reliably operate in extreme launch vehicle environments across many re-flights. Working with fellow avionics designers, you will develop innovative solutions to integrate the avionics, optimizing for cost, mass, and production rate. You will be part of a small, agile, and effective US-based avionics team that works hands-on with the physical flight hardware on the production floor and at the launch site. The ideal candidate will be experienced in mechanical and structural design, electronics packaging, and environmental survivability. You will collaborate with a range of cross-functional teams, including local propulsion and fluids systems, electrical design, vehicle integration, and testing sites – both local, national, and global – for the upper-level assemblies. You will experience vehicle hardware transform from prototype to production, through various test sites, and ending at the launch site with the full Neutron coming together. WHAT YOU'LL GET TO DO: • Development of mechanical components and electro-mechanical systems. Includes mechanical design, prototyping, production, test and integration. Execute multiple design iterations in efficient manner, while leveraging technical experience to clear short-term issues and long-term roadblocks. Own the hardware delivery timeline through inception, design, assembly, and test., • Support and execute hardware testing, including system-level performance validation, Archimedes hotfires, integrated vehicle stack tests, and explosive/destructive qualification., • Analysis of electro-mechanical and structural assemblies via classical and computer methods. Assess and optimize for downstream performance of physical events being driven and usage across the lifetime of the rocket., • Contribute to the future, reusable vehicle architectures. Optimize the designs, implementation, and operation to achieve hands-off reusability between flights., • Bachelor's degree in Mechanical Engineering, Aerospace Engineering or equivalent., • Professional experience with NX, Ansys, or similar tools., • Experience designing things for stressing thermal and dynamic environments., • Strong fundamentals in mechanical design, 3D modeling, finite element analysis (FEA), and manufacturing drawing creation (GD&T)., • Professional experience working with avionics designers and exposure to electronics integration and packaging., • Experience with best practices for design, qualification, and production of avionics systems and electro-mechanical components for launch vehicles., • Experience with Python or similar software languages and integration., • Experience with an agile development environment., • Experience vibration and shock testing avionics, sensors, or similar components., • Experience with HASS/HALT, HITL testing electronics and designing test support hardware., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus., • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing., • Must be physically able to commute to buildings. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$100,000—$125,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description About RTCA: RTCA is a precision aerospace and defense manufacturing group built on decades of hands-on machining expertise, with roots spanning more than 50 years. We support mission-critical commercial and government aerospace programs across North America through four U.S. Centers of Excellence operating as an integrated platform with 150+ CNC machines and a team of 250+ professionals. Unlike large organizations where roles can be narrow, RTCA offers hands-on ownership and real visibility – you understand how your work supports the team, the operation, and the end customer. Our flat structure allows employees to take initiative, grow their skills, and have their contributions recognized, while still providing the stability, advanced technology, and meaningful work of an established aerospace manufacturer. At RTCA, we believe in teamwork, excellence, and delivering with pride. One Team! One Mission! How You’ll Make an Impact The Manufacturing Engineer is responsible for developing detailed process plans that align with customer end-item requirements, ensuring production instructions are clear, effective, and achievable. This role requires collaboration with production teams, quality engineers, and suppliers to optimize manufacturing processes, evaluate engineering approaches, and contribute to process improvements. A successful candidate will bring a solid understanding of shop practices, machine capabilities, and external processing methods to the table. What you’ll be doing as a Manufacturing Engineer: • Working a Full-time, onsite position at our Chatsworth, CA location., • Develop and provide written work instructions for production processes., • Create detailed drawings and models to support work instructions., • Execute process routings, drawings, inspection plans, and related documentation updates., • Evaluate manufacturing processes to drive product development and implement corrective actions., • Assist the quoting team by providing methods, time estimates, and cost data for customer quotations., • Participate in resolving customer complaints and lead corrective/preventive action investigations., • Maintain regular communication on project status and milestones with internal stakeholders., • Support continuous improvement initiatives and lean manufacturing activities., • Bachelor’s degree in Mechanical, Aerospace, or Manufacturing Engineering, or equivalent experience., • Strong multi-tasking abilities, with a focus on meeting timelines and budgets., • Excellent organizational, written, and verbal communication skills., • Demonstrated problem-solving and analytical thinking capabilities., • Meticulous attention to detail., • Minimum of 5 years of hands-on experience in a machine shop environment., • Proficiency in SolidWorks and application of geometric dimensioning and tolerancing (GD&T)., • Experience in Design for Manufacturing and Assembly (DFM/DFA)., • Working knowledge of AS9100 quality management standards., • Ability to interpret and implement customer drawings and specifications., • Familiarity with Microsoft Office tools (Word, Excel, Outlook, etc.)., • Strong understanding and application of lean manufacturing, continuous improvement, and Six Sigma principles., • Fundamental understanding of machine shop practices and external processing. Physical Demands: The physical demands and work environment characteristics described here are representative of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to do the following: • Ability to lift or move up to 50lbs., • Reach forward, up, down and to the side in order to move equipment., • Continuous standing and walking throughout the workday., • Ability to reach with hands and arms; use hands to manipulate, handle, or feel material., • Access, input, and retrieve information from a computer. Work Environment: A large percentage of work time is spent in a machine shop where temperatures vary from hot to cold. The environment may also include exposure to noise, dust, fumes, vapor from coolant, etc. Industry standard safety equipment is provided by the Company, and specific notice is posted in areas where safety equipment is required. Compensation and Benefits: Employee Benefits: Medical, dental, vision, basic and supplemental life insurance, long-term disability and 401(k) with up to 6% QACA company match. The Manufacturing Engineer I or II Compensation range for onsite California applicants is $70,000 - $120,000 annually commensurate with experience. Some shifts may include shift differential pay rates. Other site ranges may differ. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. RTC is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Affirmative Action and Disability Accommodation Applicants wishing to receive information on RTC’s Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact the RTC Human Resources Department. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request an accommodation, contact the RTC Human Resources Department. Candidates will receive consideration without discrimination in accordance with the requirements of article 9 to chapter XVIII of the City of Los Angeles Municipal Code, federal and state laws of California. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request an accommodation, contact the Human Resources Department.

Job Description Kirkhill, Inc. welcomes people who share our determination and high standards to join us in doing work that moves the world forward. We design, manufacture, and market highly engineered products and systems principally for the aerospace and defense markets. Kirkhill, Inc. a wholly-owned subsidiary of Transdigm, is a leading diversified manufacturer of highly engineered, organic, and in-organic elastomer based products. Company: We are a global leader in high-performance elastomer products headquartered in Brea, CA with 100 years of experience. Our engineered, high-performance elastomer products can be found on commercial, military and business aircraft around the world as well as missiles, space launchers and satellites. Job Summary: Optimize all aspects of manufacturing process by identifying opportunities and applying simpler, faster, more cost effective and reliable methods in all phases of manufacturing process. Qualifications: • Strong communication, presentation, interpersonal, and organizational skills., • Demonstrated experience in analyzing and solving parts and process issues., • Demonstrated ability to meet critical deadlines in fast paced environment., • Team player with ability to work well with employees and customers alike., • Ability to multi-task and shift priorities. Requirements: • Must be an undergraduate enrolled to obtain a degree in one of the following: Manufacturing Engineer, Mechanical Engineer, Aerospace Engineer, and Materials Engineer. Kirkhill, Inc. Competencies • Customer Focus - Knows and understands the needs of internal and external customers. Is results oriented and works hard to consistently provide exceptional service., • Ethics and Values - Adheres to an effective set of core values and beliefs and acts in accordance. Rewards the right values and disapproves of others., • Problem Solving - Looks beyond the obvious to find effective solutions., • Integrity and Trust - Widely trusted and seen as direct and truthful., • Functional/Technical Skills - Possesses the skills to be effective in the job. Has the skills to perform the job at a high level of accomplishment., • Listening - Practices active and attentive listening, able to hear others., • Action-oriented - Full of energy, willing to take action., • Composure - Cool under pressure, not knocked off balance by the unexpected, is a settling influence., • Values Diversity - Supports fair and equal treatment for all. Kirkhill, Inc. is proud to be an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. All successful candidates must submit to post offer pre-employment physical examination, drug/alcohol screen and background check as a condition of employment. Job Posted by ApplicantPro

The ideal candidate will have a 4-year degree in engineering or business, along with experience in construction and design. A leading construction company in California is seeking a Senior Project Engineer to provide technical support in project document control and administration.

Reports to a Senior Cost Engineer and assists in developing project budgets, tracking actual costs, and forecasting project costs across various projects. Prior work experience in Cost Controls, Budgeting, or Cost Forecasting is required; proficiency in Excel is a requirement. Utilizes MS Excel soft

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Temporary to full time role (1 weeks+)Purpose As a High-Volume Production Recruiter, you'll play a critical role in scaling our manufacturing workforce—owning full-cycle recruitment for key hourly and skilled-trade roles including production technicians, CNC machinists, CNC programmers, quality technicians, and metrology specialists. You'll partner directly with production leadership to anticipate workforce needs, build proactive pipelines, and ensure we consistently hire high-caliber talent to support our fast-growing manufacturing operations. This role requires someone who thrives in a fast-paced, high-output environment and can balance high-volume requisition loads with precision targeting for niche technical skills. The Role • Own end-to-end recruiting for high-volume manufacturing and skilled-trade roles—including production technicians, CNC machinists, CNC programmers, welders/fabricators (if applicable), quality/inspection technicians, and metrology specialists., • Partner directly with production, manufacturing engineering, and quality leadership to define staffing needs, forecast hiring demand, and align on recruiting strategies., • Develop and maintain high-volume candidate pipelines using a mix of sourcing channels including job boards, LinkedIn Recruiter, industry networks, vocational schools, referrals, and community/career-fair partnerships., • Screen candidates for both technical competency and manufacturing environment fit, using structured interviews and skill-specific assessments where needed., • Drive a fast, consistent, and high-integrity hiring process, ensuring timely feedback, tight coordination with hiring managers, and rapid decision-making., • Deliver a strong candidate experience that reflects our culture, values, and commitment to talent quality—even at scale., • Track, analyze, and report hiring metrics, including time-to-fill, funnel conversion, source effectiveness, and pipeline health, to support continuous improvement., • Support workforce-branding initiatives, especially those targeting skilled trades and manufacturing talent pipelines.Basic Qualifications, • Ability to lawfully access information and technology that is subject to US export controls, • 5+ years of recruiting experience, with a strong focus on high-volume manufacturing, skilled trades, or technical hourly roles., • Demonstrated success hiring production technicians, CNC machinists/programmers, quality inspectors, and metrology/precision measurement technicians., • Experience recruiting in advanced manufacturing, aerospace/defense, automotive, robotics, or similarly technical production environments., • Proven ability to manage 20–40+ active requisitions while maintaining excellent candidate and hiring-manager communication., • Strong sourcing capabilities, particularly for hard-to-find skilled trades and passive technical talent., • Experience using ATS platforms (e.g., Greenhouse) and sourcing tools (e.g., LinkedIn Recruiter, Indeed Resume, industry job boards)., • Exceptional organizational skills, attention to detail, and urgency in driving hiring processes forward., • Strong written and verbal communication skills with the ability to influence, advise, and gain alignment from stakeholders., • A clear bias for action—you move quickly, stay organized, and deliver in fast-changing environments.Preferred Qualifications, • Background in agency, RPO, or high-volume staffing environments focused on skilled trades or manufacturing., • Existing network or industry presence within CNC machining, precision manufacturing, quality/inspection, or metrology communities., • S04 / Recruiter: $90,100 - $123,888, • S05 / Senior Recruiter: $104,040 - $143,055 Pay Range$90,100—$143,055 USD What We Offer: • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Temporary role Duration: ~3 months (could extend or become full time) Local candidate ONLY - this role requires 2/3 days onsite in Torrance, CA per week Purpose As a Recruiter (temporary), you'll be a force multiplier across the organization—owning full-cycle recruitment for high-impact roles spanning engineering, manufacturing, operations, and business functions. You'll partner directly with hiring managers and leadership to drive proactive hiring strategies and ensure we continue to attract and close top-tier talent across all domains. This role requires someone who thrives in a fast-paced, high-expectation environment and knows how to balance high-volume tactical execution with strategic hiring advisory. The Role • Own full-cycle recruiting for a wide range of roles—from mechanical, software, and robotics engineers to finance, supply chain, program management, and operations positions, • Partner closely with hiring managers to define roles, craft job descriptions, and align on recruiting strategies, • Source and engage high-caliber candidates across active and passive channels, leveraging tools like LinkedIn Recruiter, referrals, and your network, • Run structured, high-integrity interview processes that assess for both skill and team fit, • Deliver a high-touch, white-glove candidate experience from first outreach to close, • Work cross-functionally with People Ops, IT, and hiring teams to improve tools, workflows, and reporting, • Track and report recruiting metrics and hiring outcomes to inform continuous improvement, • Support employer brand initiatives including events, online presence, and employee referralsBasic Qualifications, • 3+ years of recruiting experience, including both technical (engineering, software, manufacturing) and non-technical (G&A, operations) roles, • Experience recruiting in aerospace, defense, or advanced manufacturing environments, with an understanding of the unique hiring requirements for those industries, • Experience operating in a high-growth, high-performance, or startup environment where talent quality is non-negotiable, • Proven ability to run multiple searches in parallel and maintain exceptional candidate and stakeholder communication, • Strong sourcing and closing skills, especially with passive talent, • Data-driven mindset with experience using ATS platforms (e.g., Greenhouse) and sourcing tools (e.g., LinkedIn Recruiter), • Excellent written and verbal communication skills, professionalism, and sound judgment, • Bias for action—you move quickly, stay organized, and deliver without constant directionPreferred Qualifications, • Prior background in agency, search firms, or internal centers of excellence for talent, • A strong personal network across engineering, manufacturing, or operations communities Pay Range$43—$55 USD What We Offer: • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job DescriptionDescription: Seizmic Inc. is seeking a Junior Design & Estimating Engineer to support our Structural Support Systems team. This role is ideal for an early-career engineer looking to gain hands-on experience in structural design, fabrication estimating, and custom steel projects. You will work directly with the Design & Estimating Engineer, assisting with project estimates, material take-offs, and preliminary design layouts for platforms, mezzanines, guardrails, and other structural systems. What You'll Do • Assist with cost estimates and material take-offs for custom fabrication projects, • Review architectural and structural drawings, • Support conceptual layouts for platforms, stairs, and structural systems, • Coordinate with engineering, fabrication, and sales teams, • Bachelor’s degree in engineering, Construction Management, or related field preferred, • 0–2 years of relevant experience or internship experience, • Ability to read structural drawings Seizmic designs and fabricates structural support systems used across a wide range of industries. Our team collaborates closely across engineering, fabrication, and installation to deliver innovative custom solutions.

Job Description Join our Hazen team and make the world a better place providing exceptional client service in all things water® and superior technical solutions for our clients. Hazen is a creative, employee-owned company with minimal bureaucracy where employees thrive. Hazen has outstanding opportunities for motivated, talented people that enjoy teamwork and collaboration, client service, and solving our clients’ most difficult challenges. You will be supported by multiple mentors on projects and local office leadership. This is an important role in a rapidly growing market to support the development of non-traditional water supplies including impaired groundwater and potable reuse. This role seeks active engagement in the water and reuse market for Hazen. This role will support project engineering and management, and the development of water and potable reuse projects throughout California. You will be a part of the Hazen Water and Reuse practice groups engaging, collaborating, and supporting water and reuse projects, and opportunities across the country as needed. Your role will include, project management, design, planning, operational support, and business development with a focus on water reuse and drinking water projects. As Project Engineer, you will take the lead in planning and design, working under a technical lead and advisors, working with the larger Hazen team in making decisions regarding technical approaches. Managing projects, you will serve as the main point of contact for the client, contractors, and Hazen staff in making decisions regarding client expectations, standard of care, cost control, schedule control, change management, risk and claims management, and project performance. You will actively manage and report on the status of the project schedule and budget, lead project meetings with client and stakeholders, and develop, review, and approve written deliverables. Your position will lead to increasing levels of technical expertise, client development and management, supported by other local, regional, and corporate staff. Location: Los Angelos is the preferred location. Irvine and San Diego may also be considered. We provide a comprehensive benefits package which includes employer paid life insurance, 401k employer contribution (after 1 year of service), performance bonus, comprehensive family medical, dental and vision insurance, paid time off, holidays, short-term and long-term disability, paid parental leave (after 1 year of service), employee assistance and wellness programs. Typical starting pay range for this position depends on skills, experience, education and geographical location.

Job DescriptionOur commercial real estate client is searching for a Tenant Coordinator to join their team temp to perm. This role supports the property management team on a Class A office property in the Miracle Mile neighborhood of LA. The Tenant Coordinator will primarily focus on supporting the property management team with periodic reporting responsibilities. With excellent customer service skills, the Tenant Coordinator will also work with tenants resolving issues and executing on special requests. The successful Tenant Coordinator will work with vendors and other building management team members to ensure procedures are followed throughout the building. Additional responsibilities for the Tenant Coordinator include the following: Responsibilities Include: • Provides direct administrative support to Director, Operations (Account Manager), Chief Engineer (CE) and tenants as needed, • Serves as the main point of contact (POC) for service requests from tenants, • Entry of tenant service requests into work order system, • Ensures that 100% of the Certificate of Insurance (COI) for tenants and contractors are accurate and in compliance with standards, • Enforces compliance with insurance requirements among tenants, contractors, vendors and suppliers. Documents incidents of potential liability to property and equipment and forwards information to appropriate risk management personnel., • Codes and splits invoices based on cost centers and services performed, • Prepares bill backs/re-bills for special tenant requests, • Prepare manual adjustment forms for all miscellaneous tenant service requests and ensure they are billed back/re-billed to tenants monthly, • Ensure engineers take monthly readings from electric meters for tenants that have supplemental units., • Assists in management audits and prepares all files and records in preparation for the audit, • Internal and external correspondence, • Create, maintain, review, purge and forward files to appropriate storage location in accordance with company record retention policy, • Update and file all documents for vendors and tenants and ensure that contract and lease administration files are accurate and up to date, • Maintain and update tenant contact databases, • Organize departmental meeting and travel arrangements, • Manages the new tenant welcome and orientation program, • Revises and distributes updated property manuals (as needed) within the portfolio with the assistance of the property team members. Property manuals include, but are not limited to the Tenant Handbook, Team Handbook, Hazard Communication Program, Building and Tenant Emergency Response Manuals, Space Utilization Guide and Lease Summary Book, • Processes all aspects of accounts receivable, • Obtains completed W-9 forms from all vendors, • Negotiates office equipment leases and maintenance agreements while ensuring technological advancement of support systems fall within budget guidelines, • Tracks budget line items relating for administrative account purchases and resolves negative variances relative to budgetRequirements, • 2+ years of previous Coordinator experience with commercial real estate experience a real plus!, • Highly proficient in Microsoft Word, Excel, and Outlook., • Professional, reliable, flexible and have a positive, can-do attitude., • Excellent attention to detail with strong customer service skills and ability to prioritize, • Ability to communicate well in both written and verbal communication forms., • Proactive attitude and volunteers willingly to take on additional responsibilities and assist with other team members’ projects., • Interest in real estate. Education, • Bachelor’s degree and similar work experienceBenefits, • PTO, PST, Medical, Dental, and Vision Salary Range 55-60K DOE

Job Description Summary We are representing a highly respected and growing General Contractor seeking a seasoned Senior Project Manager or Project Executive with deep experience leading Division of State Architect (DSA) and Public Works projects throughout the Greater Los Angeles and Orange County markets. This role is designed for a senior construction leader who has successfully delivered large-scale public sector projects from pursuit through closeout and is ready to take on broader organizational responsibility — whether that means overseeing multiple project teams, mentoring junior staff, or serving as the senior point of contact for public agency clients and stakeholders. The ideal candidate brings a strong command of DSA compliance, public contracting law, and the operational rigor required to deliver publicly funded construction on time, within budget, and in full regulatory alignment. This is a high-visibility role with direct impact on the company's public sector growth strategy and reputation in the market. Projects typically include large-scale K–12 school new construction and modernization, community college campus projects, municipal facilities, public infrastructure, and other DSA-regulated or publicly bid construction programs. Key Responsibilities Project Leadership & Execution • Lead and oversee multiple DSA and Public Works projects simultaneously from preconstruction through DSA closeout, • Develop and maintain master project schedules, budgets, and execution plans, • Direct and mentor Project Managers, Senior Project Engineers, and field Superintendents across active project portfolios, • Establish project controls, communication protocols, and compliance frameworks at project inception, • Own full project financials including budgeting, cost forecasting, cost-to-complete, and variance reporting, • Negotiate and manage prime contracts, subcontract agreements, and change orders in compliance with public contracting requirements, • Manage owner pay applications, GMP reconciliation, and subcontractor payment workflows, • Identify financial risks early and implement proactive mitigation strategies, • Serve as the primary senior point of contact for public agency owners, DSA representatives, design teams, and school district officials, • Lead OAC meetings, DSA coordination sessions, and executive-level project reviews, • Build and maintain long-term client relationships that support repeat work and future pursuits, • Enforce adherence to DSA-approved documents, quality standards, and all applicable code requirements, • Oversee IOR coordination, DSA field engineer relationships, and inspection milestone planning, • Drive complete and timely DSA Form 6 closeout, certified payroll compliance, and project record documentation, • DSA-Regulated K–12 School New Construction & Modernization Programs, • Community College / Higher Education Campus Projects, • Municipal Facilities & Public Infrastructure, • Publicly Bid Projects (DIR, Prevailing Wage, Certified Payroll, Public Contract Code) Qualifications • 10+ years of Project Management experience with a strong focus on DSA and Public Works construction, • Proven track record delivering large-scale, publicly funded projects on schedule and within budget, • Deep knowledge of DSA processes including plan review, inspection protocols, IOR coordination, and Form 6 closeout, • Thorough understanding of public contracting law, DIR compliance, prevailing wage, and certified payroll requirements, • Experience mentoring and developing project teams including PMs, SPEs, and APMs, • Proficiency with Procore, Bluebeam, MS Project, and Microsoft Office Suite, • Exceptional communication, negotiation, and client relationship skills, • Highly competitive base salary commensurate with experience, • Performance-based bonus tied to project and company results, • Medical, dental, and vision insurance, • 401(k) with employer match, • Vehicle allowance or company vehicle, • Paid holidays and PTO, • Executive-level growth opportunities including potential equity or profit participation, • Long-term position within a stable, expanding public sector builder

Job DescriptionSalary: $200,000 - $260,000 ABOUT CITADEL CPM Citadel CPM is a California corporation, headquartered in Pasadena with offices in Fullerton, Long Beach, Riverside, and Sacramento, as well as Phoenix, Arizona. Citadel was established in 2006 to provide professional construction project management services to Federal, State, and municipal agencies in the justice, corrections, education, healthcare, infrastructure, and military market sectors. ABOUT THE TEAM Our team is dedicated to making our clients' vision a reality while delivering projects on budget, schedule, scope, and quality expectations.Our team iscommitted to resolving issues in a professional andcollaborative manner withintegrity always foremost in mind. We are proud to know that Citadel CPM is regarded as a team of reputable professionals that clients seek out to help them manage their construction projects, and thatindustry professionals aspire to join. Citadel's reputation has been built on a set of three principles that form our core values: Integrity, Professionalism, and Responsiveness. ABOUT THE ROLE Citadel CPM is in search of a senior, experienced Program Manager to join our team. In this role, you will take charge of resolving complex construction project-related issues, disputes, and disagreements, ensuring smooth progress throughout all phases of the projects. Additionally, you will play a key role in developing, assigning, and meticulously monitoring the performance of Construction Managers. ABOUT YOU You are a Senior Project /Program Manager professional with minimum of 15 years of experience in project/ construction management and at least 3 years of experience managing large Progressive Design-Build (PDB) programs or projects having construction values exceeding $200 million (not cumulative) and you have 5 years of experience in public works or large commercial construction projects. KEY RESPONSIBILITIES AND DUTIES • Primary day-to-day point of contact for the owner, contract, and design-builder., • Provide strategic guidance with project goals and objectives to ensure alignment with the owners critical needs., • Manage and provide oversight to Architects, Engineers, Schedulers, Estimators, and Construction Managers., • Assist with developing the PDB Procurement Documents., • Participating in the negotiations of the GMP or Lump Sum., • Facilities meetings and ensure cohesive, integrated teamwork., • Review design status and overall construction progress relative to submitted construction schedules., • Review change orders from all construction projects and assess their impact on the client., • Develops and implements appropriate risk allocation and management strategies for design-build projects., • Review status and monitor variances of the construction project database relative to scheduling and cost control reporting., • Review and verify submitted applications for payment and perform overall fiscal management of multiple construction projects., • Provide functional directions over areas of responsibility including construction project schedules, cost control, dispute resolution, contract administration, and quality control., • Coordinate program activities with other client organizational branches and departments, • Review and take recommended actions in resolving disputes related to construction projects., • Develop and recommend internal policies and procedures., • Perform other related duties as assigned. REQUIRED QUALIFICATIONS • 15 years full time paid professional experience in project/construction management., • 3 years of experience in managing Progressive Design-Build large programs or projects having construction values exceeding $200 million (not cumulative), • 5 years of experience in public works or large commercial construction projects., • Experience utilizing Building Information Modeling (BIM)., • Leadership experience in Energy and Environmental Design (LEED) certified projects. EDUCATION REQUIREMENTS • Graduation from a recognized college or university with a bachelors degree in Architecture, Engineering, or Construction Management. PREFERRED LICENSES AND CERTIFICATES • A valid Certificate of Registration as an Architect by the California Architectural Board or Professional Engineer by the State Board for Professional Engineers and Land Surveyors., • Project Management Professional (PMP) or Certified Construction Manager (CCM) credential., • Design Build Institute of America designation credential. Citadel CPM is committed to a diverse and inclusive workplace environment. Citadel CPM is an equal opportunity employer and does not discriminate based on race, natural origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. Citadel CPM participates in the federal E-Verify program to verify the employment eligibility of all newly hired employees. Employment is contingent upon the successful completion of the Form I-9 and E-Verify process, as required by law. To request an interview accommodation please send an email In compliance with the local law, we are disclosing compensation, or a range therefore for location where legally required. Actual salaries will vary based on several factors, including but not limited to external market data, internal equity, location, licenses, skill set, experience and/or performance. Base pay is only one component of Citadels total compensation packages for employees. Pay range for theProgram Manager is $200,000 - $260,000 salary per year. Featured Benefits Medical Insurance Vision Insurance Dental Insurance 401K Life and Long-Term Disability Insurances Paid Time Off (PTO) for personal time, sick days, and holidays Professional Development Reimbursement

Job Description 1. Duties: a) Plans and coordinates the execution of pre-construction activities associated with the preparation for the building of new schools and modernization projectsb) Responsible for the scope, schedule and budget, and overall success of multiple, new and modernization, school projectsc) Resolves complex planning, design and construction project-related issues, disputes and disagreementsd) Develops, assigns and monitors performance of Assistant Facility Development Managers (AFDM), Design Managers (DM) and Design professionals relative to assigned projectse) Reports on project budget, schedule and issues. Provides information and analysis of project issues to Departmental, Branch and Board representativesf) Reviews status and overall planning, design and construction project progress relative to submittal schedules. Reviews project through all development phases, and assesses status, progress and potentialg) Coordinates with representatives from various utility and government agencies to obtain timely action on successive phases of project completionh) Assists project team staff with A/E contracts, bid and contract planningi) Reviews and verifies Design Professional contract scope, fees and applications for payment, and performs overall fiscal management of multiple projectsj) Provides functional direction over areas of responsibility including project schedules, cost control, dispute resolution, contract administration and quality controlk) Coordinates project activities, requirements, and schedules with other District organizational branches and departments such as the Office of Environmental Health and Safety, Design and A/E Technical Support, Project Execution, Facilities Contract Administration, Inspection Unit, Maintenance and Operations, local Educational Service Centers and site personnell) Develops and recommends internal policies and proceduresm) Performs other duties as assigned