Trabajos development engineer en Jacksonville, FloridaCrear alertas

Job Description At Lodgco, we believe that hospitality success is driven by unwavering dedication, a vibrant workplace culture, and impactful narratives. We believe in investing in our team’s development to deliver a superior customer experience and achieve success together. For three decades, Lodgco Hospitality has set the standard for hospitality success. We are committed to revenue growth and maximizing the value of the assets we manage while fostering a supportive environment for our employees. Join us in elevating hotel operations and maximizing profitability. Join Our Team Today! Lodgco Hospitality is on the lookout for exceptional, detail-oriented room attendants to join the housekeeping team at Fairfield Inn & Suites - Jacksonville Airport! If you are enthusiastic about cleanliness and committed to delivering outstanding customer service and hospitality, we would love to hear from you! JOB SUMMARY: Responsible for cleanliness and sanitation of the hotel and maintaining established quality standards. ESSENTIAL JOB FUNCTIONS: • Obtain room assignments from supervisor, • Clean rooms according to established procedures, • Know correct procedure for entering a guest room, • Check room for damaged furniture and equipment, • Restock your cart at the end of each shift and return cart to storage area, • Maintain a clean and orderly housekeeping cart and storage areas, • Report all deficiencies and problems in guest rooms to the Maintenance Engineer daily, • Be alert to all possible hazards and practice safety at all times, • Adhere to Lost and Found procedures, • Provide the highest quality of service to the guests, • Follow all safety procedures and policies for all guests and employees, • Report any unusual occurrences or requests to a supervisor immediately, • Adhere to proper key control procedures, • Attend and participate in staff meetings OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. COMPETENCIES: • Ethical Conduct, • Communication both verbal and written, • Dependable and customer-focused REQUIRED/PREFERRED EDUCATION AND EXPERIENCE

Position - Electrical Engineer Location - Jacksonville, FL & National Travel Company - Manufacturing Description - This is an exciting opportunity to join a growing national manufacturing company. You will travel to the company's manufacturing sites to support a range of electrical engineering projects. Projects will deal with manufacturing equipment and systems, aimed at improving efficiency, quality issues, new product development, and more. You will support maintenance related tasks hands on when needed. You will also work with vendors and suppliers to purchase new machinery and components. This is a direct hire position offering competitive benefits and room for growth! - Bachelor's degree in electrical engineering or similar field required - Ability to travel up to 75% required (home on weekends) - Minimum of 5+ years of electrical engineering experience in a manufacturing environment required - Strong skillset with PLCs including programming required - Ability to design electrical schematics and control panels using CAD software required - Project management experience required

Job Description Are you interested in working with KMS Solutions, but don't see a current position that fits? Please submit your resume and application here! KMS Solutions is currently collecting resumes for current and future openings. Should your experience align with KMS’s needs, someone from our hiring team will reach out. We look forward to learning more about your background, experience, and career aspirations. Thank you for your interest in a career opportunity with KMS Solutions! Our Philosophy - Building Trusted Relationships KMS Solutions, LLC is a technical management / solutions company that specializes in engineering, analysis, and cyber security. Founded in 2005, KMS is a certified small business with nearly two decades of experience supporting the Department of Defense as well as many other departments and programs critical to our Nations security and well-being. KMS is a two-time winner of the USA Today Top Workplaces recognizing quality workplace cultures across the United States who put their employees first. Additionally, we received the Providence Journal Rhode Island Top Workplaces award and Culture Excellence Awards for Compensation & Benefits, Innovation, Leadership, Purpose & Values and Work-Life Flexibility. Our clients include the US Intelligence Community, Department of Defense, the Joint Staff, Navy, Army, and the Department of State. We have worked closely with DIA, CENTCOM, US Army National Ground Intelligence Center and the National Media Exploitation Center. Our strength is in collectively providing integrated services. We are dedicated to moving our Nation’s agenda forward. It’s the key ingredient that makes us who we are – like our passion for excellence, our innovation throughout our organization and our long-standing customer relationships. You will see this simple philosophy at work in everything we do. It defines who we are, challenges us, forces our minds to be open, and to be a world-class company. Core Values Our Core Values are the guiding principles and our fundamental beliefs that dictate our behavior consistently, not time to time, situation to situation, or person to person, but rather they are the underpinning of our company culture. These values are represented in everything we do: Respect, Authentic Communications, Integrity, Lasting Relationships, and Sustained Excellence (R.A.I.L.S.) Respect - Our interaction with colleagues, peers, customers and others is marked by respect and honor. Authentic Communication - We share ideas, thoughts and concerns with our clients and partners in the most authentic manner. Integrity - We do what we say, say what we do, always practice high ethical standards and honor commitments. Lasting Relationships - We are focused on forging strong, long-term relationships with clients and associates. Sustained Excellence - We consistently deliver genuine value to those whom we serve, provide superior customer value, and work to continuously improve our performance. While delivering genuine value to our customers, we are committed in developing our people, building our brand, and supporting the communities we live and work in. R.A.I.L.S. is an unwavering guide and our core values give us a framework for leadership and daily decisions and help us enjoy our time at work. What we hire (list of recent hires): • Veteran & Transitioning Navy - Military, • Program Manager - Project Manager, • Cybersecurity Engineer, • Cyber Security Specialist, • NQV – Navy Qualified Validator, • Mechanical Engineer, • Electrical Engineer, • Electronics Engineer, • Systems Engineer, • Software Engineer, • Product Integration Engineer, • Reliability Engineer, • System Safety Engineer, • Computer Engineer, • Action Officer, • Auditor, • Technical SME - Subject Matter Expert, • Program Analyst, • Acquisition Analyst - Acquisitions Analyst, • BFM – Business Financial Management, • Navy Financial Analyst, • Logistician & Logistics Analyst, • Management Analyst, • Naval Analyst, • Business Process Analyst, • Configuration Management Specialist, • Integrated Project Team Development (IPTD) Facilitator, • Coach / Trainer, • Technical Writer, • Engineering Technician, • Electronics Technician, • Program Administrator, • Database and SharePoint Analyst, • Tradesmen - Skilled Trades, • Crane Operator / Rigger, • Fabricator, • Contract Specialist - Contractor, • Technical Consulting - Consultant, • Executive Assistant Benefits and Additional Compensation: KMS offers a competitive benefits packaging including medical, dental and vision insurances, flexible spending account, PTO, paid holidays, military leave, bereavement leave, 401k / retirement savings plan, professional development and tuition reimbursement, basic and voluntary life insurance / AD&D, short-term and long-term disability, voluntary AFLAC supplemental insurance products and employee assistance plan (EAP) program. Additionally, KMS offers employee referral bonuses and a discretionary annual bonus. AAP/EEO Statement: KMS Solutions provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. KMS Solutions is a drug free workplace.

Job DescriptionConstruction Assistant Project Manager Southeast Region (GA & FL) | On-Site | $85,000-$120,000 + Benefits RQ Construction is looking for Assistant Project Manager (APM) to join our Field Operations team for projects located in the Southeast region (GA & FL). Candidates local to the region will be given priority, though relocation to on-site management may be considered for the APM position. We are gathering applications to create a pool of qualified candidates for possible future openings pending project awards. Our APM's are responsible for providing support for all assigned activities and phases of a commercial construction project from conceptual development to final completion, usually through organizing, planning, directing, scheduling, coordinating, and monitoring processes. The APM may assist the PM on larger projects, be responsible for a defined area or scope of a larger project under PM supervision, or be solely responsible for a single, small to medium project. Local candidates will be considered, though relocation to on-site project management will be required for the position. Since 1996, RQ Construction, LLC. has been a leading player in Southern California's robust commercial and governmental Design-Build economy. We now have a national and international presence with current projects spanning coast to coast. Headquartered in beautiful Carlsbad, CA, we are a full-service Design-Build company. We offer management of projects throughout the United States, with our field operations' team members who work on location for each of our projects. We specialize in fast-track projects in new commercial construction for both public and private clients, with a primary focus in the Department of Defense market. Competitive Pay: $85,000.00-$120,000.00 annually (DOE) Benefits: Vehicle Allowance, Medical/Dental/Vision, 401k/Match, Vacation/Sick/Holiday Pay, Bonus eligible EDUCATION & EXPERIENCE • A BA/BS degree in Construction Management, Engineering, Business, or related field is the minimum formal education required for this position. A combination of equivalent work experience and training in the field may be qualifying., • Four (4) or more years work experience in the construction industry or equivalent experience preferred, with one or more years' experience as a Project Engineer required., • Computer literacy (Microsoft Office, Outlook, Internet, etc.) required., • Specific software literacy (Primavera 3/6, Viewpoint, BIM, Revit) preferred., • CPR, First Aid, and OSHA 30-hour Certifications required. Training can be provided., • LEED GA credential desirable., • QCM certificate desirable. RQ Construction, LLC is a full service contracting and design firm that specializes in Design/Build projects for both public and private clients, with a primary focus on the Department of Defense. Our mission is "to provide our customers the best built environment while being the first choice of all stakeholders." We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, creed, gender (including gender identity and gender expression), religion (all aspects of religious beliefs, observance or practice, including religious dress or grooming practices) marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition (including cancer or a record or history of cancer, and genetic characteristics), sex (including pregnancy, childbirth, breastfeeding or related medical condition), genetic information, sexual orientation, veteran status, or any other basis or status protected by federal, state, or local law or ordinance or regulation. All candidates considered for hire must provide evidence of identity and U.S. work authorization at the time of hire. Additionally, all candidates must successfully pass a drug screening and commercial criminal background check, including a stricter Department of Defense background check, for access to job site at military base (if applicable for position being hired for). Job Posted by ApplicantPro

Job Description Are you ready to build your future in Construction Project Management? Auld & White Constructors is looking for motivated Managers In Training (MITs) to join our team, contribute to exciting commercial projects across Northeast Florida, and develop into the next generation of Project Managers. Why Join Auld & White Constructors? • Great earning potential and competitive benefits, • Little to no travel outside of the Northeast Florida area, • A close-knit, knowledgeable and supportive team of experts, • Our MITs have a structured development program with a path to Project Management, • Consistently rated one of Jacksonville's best places to work Position Description • Assist Project Manager in preparing project schedules, including regular updating of the Master Project Schedule., • Handle client, architect, and engineer relations., • Prepare and secure Owner acceptance of all change orders., • Assist in handling shop drawing control, review project submittals, shop drawings, RFI's, and product data., • Conduct weekly, onsite progress meetings, including documenting and distributing meeting agendas and minutes., • Efficiently prepare and distribute Requests for Information (RFIs)., • Oversee building systems commissioning., • Assist in overseeing Punch List Inspections., • Assist in prompt follow-up on any warranty items with the Owner. Position Requirements • The employee must possess a four (4) year college degree in Building Construction Management, Civil Engineering or other related field., • 1-3 years' experience in Commercial Construction (including internships), • An understanding of construction procedures and material and project management principles., • Excellent communication and organization skills., • Ability to work in fast paced environment and maintain effective working relationships with vendors, clients, co-workers and management team. Auld & White Constructors is an Equal Opportunity Employer. Auld & White does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

Job Description Foth is a 100% member-owned science and engineering consulting firm headquartered in Wisconsin, with over 85 years of success. Our 750 members across 33 locations are dedicated to solving our clients’ toughest science and engineering challenges. Consistently ranked by Engineering News Record in the top 150 firms, we offer a values-based, collaborative, and flexible work environment with professional growth opportunities. If you thrive working alongside a smart and caring team, Foth may be the place for you. Join our team and experience the Foth difference that contributes to our impressive 92+% member retention rate! Learn more at foth.com/careers. Foth is looking for a Lead Coastal Engineer will lead and execute complex coastal and waterfront projects, including beach nourishment, shoreline stabilization, and coastal analysis efforts. This role is highly technical and collaborative, involving numerical modeling, data analysis, design calculations, and development of reports and construction documents, while translating complex findings into clear insights for clients and stakeholders. You will take ownership of projects from inception through delivery - coordinating resources, supporting permitting and construction efforts, mentoring junior staff, and serving as a client-facing technical expert. This position is intended to be based in our Jacksonville, FL office, with consideration for candidates in the Palm Beach County area, with a future in-office expectation. Primary Responsibilities: • Lead with Expertise: Take the helm as lead your team on diverse waterfront and coastal projects, guiding client interaction, design, and execution with your knowledge and creativity, • Innovate and Implement: Stay ahead of the curve by identifying and implementing cutting-edge design and engineering technologies that set new industry standards, • Analyze and Design: Use your skills to perform intricate calculations and analyses, crafting and reviewing design drawings for a variety of beach nourishment and shoreline stabilization projects, • Drive Projects to Success: Collaborate with Project Managers to oversee project lifecycles, ensuring budgets, schedules, and quality standards are met, • Craft and Contribute: Develop comprehensive analytical and construction documents and contribute to Foth's growing technical library in coastal engineering, • Engage and Expand: Play a pivotal role in client relations and business development, from crafting compelling proposals to nurturing lasting relationships. Communicate complex topics to non-technical stakeholders effectivelyRequired Qualifications:, • Bachelor's degree in Civil, Ocean, or Coastal Engineering or related engineering degree from an EAC/ABET accredited program, • 10+ years of coastal engineering experience in the areas of feasibility, design, and/or construction management, • Professional Engineer license (or ability to obtain within 12 months of hire)Preferred Qualifications:, • Master’s degree in Coastal or Oceanographic Engineering from an EAC/ABET-accredited program, • 10+ years of experience, preferably within a coastal engineering consultancy, • Experience integrating engineering and environmental sciences across coastal projects, • Experience preparing project deliverables, including scopes of work, cost proposals, procurement responses (RFQs/RFPs), construction documents (plans and specifications), and technical reports, • Experience with construction processes, field and construction inspection, and contract management for coastal projects such as beach nourishment, shoreline stabilization, coastal structures, and dredging/disposal, • Proficiency in numerical modeling and coastal analysis tools (e.g., Delft3D, MIKE21/DHI, SMS, ADCIRC, XBeach, UNIBEST, SWAN) and mapping/design software (e.g., AutoCAD, MATLAB, Python, ArcGIS, Grapher, Surfer), • Experience leading geotechnical investigations and designing sand borrow areas for beach renourishment, • Demonstrated success navigating State and Federal regulatory processes, including permitting, compliance, and funding grant applications (including post-storm disaster assessments), • Experience developing and presenting technical work at conferences or professional seminars All Foth Companies are equal opportunity employers, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, gender identity, sexual orientation, or any other characteristic protected by law. Qualified women, minorities, persons with disabilities, and veterans are encouraged to apply. All locations are tobacco-free. Subject to applicable state law, all applicants who have received a written offer of employment and a copy of Foth’s Drug and Alcohol-Free Workplace Program Policy, will be required to undergo testing for commonly abused controlled substances. Applicants must complete the required drug testing within two business days of offer acceptance. Foth will pay for all drug testing, which will be conducted by a licensed independent medical laboratory that follows testing requirements in accordance with applicable state law. Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Notice to Third Party Recruiters/Agencies: Foth does not accept unsolicited resumes from third party recruiting firms. Absent a signed recruiting agreement coordinated through Foth, Foth reserves the right to pursue and hire candidates without financial obligation to third party recruiters or agencies. Artificial Intelligence: Foth uses artificial intelligence and other technology-assisted tools in connection with parts of our recruiting and hiring process, including to assist with reviewing application materials, identifying potentially qualified candidates, sourcing candidates, and supporting interview preparation. These tools are used to support, but do not replace, human decision-making, and all employment decisions are made by qualified human reviewers. Where required by law, we will provide additional information regarding the use of these tools, and applicants may contact us with questions or request reasonable accommodation regarding their use.

Job Description The Process Controls Engineer is responsible for leading the design, implementing, and optimizing control systems to ensure the efficient and safe operation of our diverse food and beverage manufacturing operations. This role requires a deep understanding of system architecture design, network design, instrumentation specification and selection, control panel design, PLC & HMI application development, acceptance testing, system commissioning and start-up for production systems, with an emphasis on raw material storage, processing, packaging, finished goods storage and handling, and food safety compliance, as well as a commitment to sustainability and cost-effectiveness. You will collaborate closely with cross-functional teams to develop innovative solutions and enhance automation performance. This role requires a deep understanding of instrumentation and control strategies, sizing and specifying controls systems, coordinating electrical, mechanical, packaging and process systems with a focus on maintaining high standards of quality and regulatory compliance. Duties/Responsibilities: • Design, implement, and optimize control systems for industrial processes., • Collaborate with cross-functional teams to develop innovative process solutions., • Develop controls design for P&ID’s, equipment specifications, installation specifications, instrumentation lists, controls narratives for coordination, controls schematics, and control panel design., • Coordinate with 3rd parties for equipment engineered by others, with internal or external project team members for integration of the controls design., • Assist in identifying suppliers & subcontractors, perform technical writing aspects in bid packages for scope definition, compile technical engineering documents for bid packages., • Participate in bid-scope reviews, assist in analyzing proposals, lead design reviews of drawings & models, attend coordination meetings, review submittals, participate in factory acceptance testing., • Travel to site for technical assistance, coordinate directly with Stellar field staff and subcontractors, identify and resolve issues that arise, review installations for correctness, and revise drawings for as-built conditions., • Assist in preparing comprehensive documentation of commissioning processes, test results, and system performance., • Provide I/O checkout support, startup activities, process system testing and commissioning activities, including functional testing, performance testing, and safety testing., • Coordinate with clients and stakeholders for system handover, providing necessary documentation and training for operational staff., • Troubleshoot and resolve control system issues promptly to minimize downtime., • Maintain high standards of quality and regulatory compliance in all control system implementations., • Provide technical support and training to team members on control systems and instrumentation., • Stay updated with the latest advancements in control strategies and apply them to enhance process performance., • Ensure all projects comply with industry safety regulations and standards., • Maintain current knowledge of food manufacturing trends, regulatory requirements, and food industry-specific considerations as they relate to controls and automation., • Other duties as assigned.Required Skills/Abilities:, • Proficiency in control system design, software and instrumentation., • Strong leadership and team collaboration skills., • Thorough understanding of the food industry, process systems, & plant operations., • Familiarity of startup and commissioning processes and procedures for process systems., • Excellent analytical, problem-solving and troubleshooting abilities, capable of identifying and resolving issues., • Effective communication skills, both written and verbal, including interpersonal skills., • Innovative thinking and the ability to develop creative solutions., • Attention to detail and strong organizational skills with ability to develop and maintain controls documentation., • Ability to work under pressure and meet tight deadlines., • Knowledge and understanding of government and industry regulations, and standards including safety as relates to food or beverage manufacturing systems., • Flexibility to work in different environments and adapt to changing project requirements including new technologies and advancements.Education/Experience:, • Bachelor’s of Science Engineering degree in Electrical, Automation, Computer Science or a related field., • Minimum of 1-7 years of experience in process controls engineer or a similar role. Relevant professional certifications and food or beverage manufacturing systems are a plus., • Strong understanding of control system architecture and instrumentation., • Experience with controls design and engineering in a design-build or EPC setting., • Experience with PLCs, HMIs, SCADA systems, and other automation tools., • Familiarity with software development life cycle and programming languages such as ladder logic, C++, or Python., • Proven track record of successfully managing control system projects from concept to completion., • Experience in calibration, startup and commissioning of food or beverage process systems is preferred., • Knowledge of cybersecurity protocols related to control systems., • Knowledge of Process Controls that support recipe management and product repeatability., • Knowledge of 3A, USDA, or FDA sanitation requirements and regulatory entities., • Exposer and / or skilled in relevant software; Microsoft Office Software, AutoCAD, Procore, Bluebeam, Adobe, Power BI, and BIM / ACC is preferred.Travel Requirements:, • Ability to travel regularly for site visits, attend project meetings, corporate training, and events., • Ability to travel internationally, obtain and maintain a valid passport., • Travel expected to be at least 20%., • Flexibility to travel on short notice for urgent business needs., • Comfortable with various modes of transportation, including flights, trains, and rental cars., • Ability to navigate and work effectively in diverse geographical locations and time zones., • Ability to adapt to different cultures and customs while traveling., • Maintain a professional demeanor and appearance during business trips., • Compliance with company travel policies and procedures.Physical Requirements:, • Ability to use a computer, phone, iPad, printer, scanner, and other office equipment., • Visual acuity for detailed work and computer use., • Ability to lift, carry, and move up to 25 pounds of files, documents, and materials, • Ability to sit, stand, and walk for long periods of time, ability to climb flights of stairs and ladders., • Ability to bend, stoop, and reach as necessary., • Manual dexterity for operating office equipment, measuring devices, quality & testing devices., • Ability to work around machinery during installation, startup, commissioning, and troubleshooting., • Capability to handle occasional exposure to extreme heat, extreme cold, wet environments, and extreme odors. About Stellar: Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Remote & hybrid work options for many positions, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job Description As a leading member of the property management team, the Chief Engineer is accountable for ensuring the hotel is maintained properly. The Chief Engineer performs and leads the repair and maintenance of the hotel's physical plant, including (but not limited to) plumbing, electrical, HVAC, pool, fire & life safety, and all general facilities. The Chief reports to the General Manager. The Chief is responsible for maintaining the hotel at the highest quality level, giving all guests the ability to have a worry-free experience, and protecting the asset for the owners while embodying McKibbon’s Guiding Principles. A Day in the Life Chief will work autonomously in some instances, without constant supervision. Responsible for monitoring and maintaining the operations and functions of both the interior and exterior areas of the property. Perform any necessary construction trades, like plumbing, electrical, carpentry, basic heating and air conditioning, pool maintenance, painting, caulking, etc. The Chief will not be expected to be an expert in all trades but will be expected to be proficient enough to do a good job, utilize external resources, and train others in the engineering department. In addition to the trade skills, the Chief will need to possess certain people skills that will allow them to be proactive and interactive with other associates and hotel guests. Play a key role in communicating and interacting positively with associates and guests. Follow the guidelines established by McKibbon Hospitality to ensure the safety of associates and guests, while protecting company assets. Assist the GM and AGM with recruiting, hiring, and training maintenance team members. The number of associates in the maintenance department will depend on the hotel's size and complexity. While this role has no direct reports, it involves coaching team members to ensure efficient practices are followed in alignment with company and brand standards. Job Requirements Ability to monitor the performance of the service/contractor to ensure that contracted service is performed satisfactorily. Ability to effectively maintain the physical plant while meeting Guests’ needs within the defined operations budget. Ability to communicate operational activities, priorities, and problems with hotel leadership. Possess knowledge or methods and techniques for conducting on-the-job training. Ability to create a learning environment encouraging employees to further develop their job skills. Ability to observe employees’ work performance for comparison with performance standards Ability to determine what action should be taken in response to a customer complaint, comment or inquiry. Ability to negotiate with service company/contractor to obtain the best price for services. Ability to estimate the time (labor) required to complete maintenance work. Ability to determine the best time to schedule maintenance jobs to avoid disrupting the operation of the hotel. Ability to proactively discern operational and maintenance concerns, then address them to eliminate downtime and avoid disaster. Knowledge of problem-solving techniques and methods. Knowledge of common causes of equipment malfunction. Experience with Microsoft Office 365, including Outlook, Word, Excel, as well as utilizing a maintenance management system to initiate, perform, and report on service orders and PMs. Ability to perform various maintenance tasks, which may include climbing stairs, walking 10,000 steps or more each day, utilizing power hand tools, and lifting up to 50 pounds. Must be able to kneel, stand, and work in varying indoor/outdoor conditions, and access high or confined spaces as needed. Ability to perform basic painting and caulking skills. Ability to use standard hand tools, such as wrenches, pliers, screwdrivers, hammers, and electrical measurements. Knowledge of preventive maintenance methods and techniques for maintaining equipment. Ability to perform tests to check for the normal operation of the hotel’s equipment. Ability to perform Basic Maintenance Skills. Plumbing, A/C Filter Changes, Clean Coils, Electrical work, and Carpenter work. Ability to test pool and spa chemicals, CPO Certification required. Skilled in laundry and kitchen operations to allow operations to maintain and/or exceed production standards. Skilled in the use and testing of all Fire & Life Safety equipment, alarm systems, and sprinkler systems to maintain proper operational status. Knowledgeable on local, state, and federal regulations for testing and operation in accordance with NFPA-72. Ability to evaluate and select job applicants based upon information obtained through personnel questionnaires, resumes, and interviews. 3 Years minimum experience in a lead maintenance role. Previous hotel experience is highly desired. Possess strong listening skills with the ability to comprehend and address concerns and issues raised by workers, clients, and guests. Must be attentive, friendly, helpful, and courteous to clients, guests, and associates. Embrace McKibbon’s Guiding Principles: Think Bigger, Love Your Community, Do the Right Thing, Support Each Other, Make a Lasting Impression. Why McKibbon? We believe in our Guiding Principles: Think Bigger. Love Your Community. Do the Right Thing. Support Each Other. Make a Lasting Impression. At McKibbon, you’ll join a supportive team that values your work and helps you grow. McKibbon is an Equal Opportunity Employer and consider all applicants without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected status under applicable law. Applicants must be at least 18 years of age, legally authorized to work in the United States, and able to successfully complete any required background screening as a condition of employment. Perks & Benefits Beyond the Basics: We know that hospitality starts from within, and that’s why we value the employee experience as much as we value our guests’ experience. From our competitive benefits package to our fun-loving spirit, we strive to create an environment that’s equal parts work and play. Our people will always be our first investment. We offer benefits and perks based on full or part time employment: Benefits: Full Time Associates: Comprehensive benefits package including medical, dental, and vision Life insurance Pet Insurance Short and long-term disability Paid time off and holidays Tuition assistance Financial & Occupational Wellness: All Associates Competitive Compensation with incentives (incentives vary by position) 401K Savings Plan, 50% matching up to 10% of compensation Associate referral program Brand and company training classes, workshops and conferences for career growth and development (varies by position) Personal Wellness: All Associates Fundraising matching funds program Team volunteer opportunities 24/7 chaplain services Exclusive hotel rate discounts Any state specific holiday, vacation or benefit requirements will apply. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, age, disability, pregnancy or maternity, sexual orientation, gender identity, citizenship status, military status, or any other protected characteristic in accordance with applicable federal, state, and local laws.

Job Description A Process Electrical Designer will create equipment and electrical layouts, develop drawing packages, and collaborate internally with the project team (project managers, project engineers, engineers) and externally with original equipment manufacturers (OEM) and clients. You will be responsible for analyzing sketches / drawings, identifying areas for improvement, and implementing innovative solutions that align with the project objectives. The Process Electrical Designer will work in both office and field environments. This role will require working in various industrial settings, including construction sites, manufacturing plants, and other operational facilities. Duties/Responsibilities: • Utilize 3D Scanner to scan existing equipment., • Assist in creating preliminary process equipment / general arrangement layouts in 2D AutoCAD., • Develop project models in 3D utilizing Revit and other 3D support software to include importing OEM models, creating families, routing of utility piping, conduit, cable tray, supports for equipment and piping., • Assist engineers with P&ID or process flow diagram (PFD) drawings as needed., • Assist electrical engineer in the development of single line and wiring diagrams as needed, • Develop panel and cable schedules, • Assist in developing installation drawings & packages utilizing 3D model., • Review of OEM 2D drawings & 3D model submittals for conformance to layout, validate clearances and access requirements, conforms to applicable specifications, and coordinate changes with OEM’s and Client., • Coordinate with project team during design and construction phases., • Travel as required to Owner facilities to learn and gather information about existing processes, equipment, and utilities., • Travel as required to job sites to support installation by collaborating with Stellar site staff, OEM’s, and installation subcontractors., • Updating drawings with record data., • Follow all drawing and modeling standards., • Participating in internal improvement efforts., • Other duties as assigned. Required Skills/Abilities:, • Proficiency with process design software, AutoCAD 2D, Revit or other 3D software., • Exposer and / or skilled in relevant software; Microsoft Office Software, Procore, Bluebeam, Adobe, Power BI and BIM / ACC., • Knowledge of National Electrical Code (NEC) standards., • Familiarity with ISA 5.1, • Ability to ensure compliance with regulatory requirements., • Ability to collaborate with cross-functional teams., • Effective communication skills, both written and verbal, including interpersonal skills., • Innovative thinking and the ability to develop creative solutions., • Attention to detail and strong organizational skills., • Ability to work under pressure and meet tight deadlines., • Familiarity with industry regulations, and standards including safety., • Flexibility to work in different environments and adapt to changing project requirements. Education/Experience:, • Minimum of an Associates 2-year degree in drafting, 3D modeling, or related field technical experience in construction trade., • Minimum of 1 – 5 years of experience in electrical design or a similar role. Relevant professional certifications are a plus., • Experience with Eplan or Plant 3D is a plus, • Experience in relevant industry (e.g., food or beverage manufacturing, industrial manufacturing, etc.)., • Experience in sanitary design for the Food & Beverage industry is a plus., • Experience in Electrical & Controls design, Equipment design, and Equipment Layouts are preferred. Travel Requirements:, • Ability to travel regularly for site visits, attend project meetings, corporate training, and events., • Ability to travel internationally, obtain and maintain a valid passport., • Travel expected to be at least 25%., • Flexibility to travel on short notice for urgent business needs., • Comfortable with various modes of transportation, including flights, trains, and rental cars., • Ability to navigate and work effectively in diverse geographical locations and time zones., • Ability to adapt to different cultures and customs while traveling., • Maintain a professional demeanor and appearance during business trips., • Compliance with company travel policies and procedures. Physical Requirements:, • Ability to use a computer, phone, iPad, printer, scanner, and other office equipment., • Visual acuity for detailed work and computer use., • Ability to lift, carry, and move up to 25 pounds, • Ability to sit, stand, and walk for long periods of time, ability to climb flights of stairs and ladders., • Ability to bend, stoop, and reach as necessary., • Manual dexterity for operating office equipment, measuring devices, quality & testing devices., • Ability to work around machinery during installation, startup, commissioning, and troubleshooting., • Capability to handle occasional exposure to extreme heat, extreme cold, wet environments, and extreme odors. About Stellar Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job Description Hazen and Sawyer is seeking a Water/Wastewater Engineer for our Jacksonville office. As part of our design and process teams, you will be involved with a wide range of wastewater infrastructure projects. This will encompass all phases of design, including conceptual/feasibility evaluations, project management, preparation of design reports, permitting, development of construction drawings and specifications, and support of construction services. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals. Key Responsibilities: • Support the development of technical treatment strategies, selection of treatment processes, developing process design criteria, and delivering projects, • Support coordination and collaboration with clients, • Coordination with internal technical specialists in all practice areas and discipline design professionals for project delivery., • Support planning, design, permitting, and construction of water/wastewater-related projects., • Experience working with interdisciplinary teams to effectively meet the client’s needs, • Candidate shall also be able to support preparation of proposals and presentations, • Fieldwork and site visits from planning through construction may be required with occasional travel Required Qualifications: • Bachelor's degree in Civil or Environmental Engineering, • PE license in Florida (or ability to obtain within first year), • 5-12 years of experience in the field of wastewater-related infrastructure, including project engineering/management (planning, design, and construction), • Experience in successfully delivering supporting projects spanning multiple years in collaborative, multi-disciplinary teams, • Proficient in all MS Office based computer software, • Excellent communication and interpersonal skills, and capable of interacting effectively with staff, clients, and regulatory agencies, • Self-starter with attention to detail, • Strong organizational skills, • Must be capable of presenting complex issues to nontechnical people, • Add qualifications as required by the specific position Preferred Qualifications: • Advanced degree (Master’s or Doctorate) in Civil/Environmental Engineering What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Who We Are Atwell, LLC is a bold leader in the consulting, engineering, and construction services industry, delivering a broad range of creative solutions to clients in the real estate & land development, and energy markets. We have a strong national presence and a diverse, award-winning project portfolio. Atwell is a privately owned company, with 2,000+ passionate team members across 75+ locations and growing! Atwell, LLC is a proud recipient of the following 2025 awards: • Ten consecutive years in a row as a "Best Place to Work" by Zweig Group (#11), • Recognized as #70 in the ENR Top 500 Design Firms, ranked in every region, • Recognized in Crain's "Fast 50" as one of the fastest-growing companies (#14), • Recognized as the 2025 ENR Design Firm of the year for the Southeastern US We are seeking a Civil Engineer EIT to join our growing team You will play a key role in supporting project teams by leading design aspects and addressing engineering issues across various projects. You will have the opportunity to develop and showcase your proficiency in civil engineering principles while collaborating closely with project managers, team members, and clients. Responsibilities: • Partner with project teams and clients to prepare project documents and proposals., • Draft, review, and finalize project deliverables including:, • Site plans, • Engineering reports, • Cost estimates, • Project schedules, • Permit applications, • Due diligence reports, • Make edits and modifications to plans based on client and agency feedback., • Research local/state zoning requirements for properties and projects., • Conduct site visits and field assignments., • Analyze site survey data and consider development factors., • Utilize AutoCAD Civil 3D and related software to complete assignments efficiently and according to quality standards., • Communicate effectively with clients, municipalities, and agencies under the direction of the Project Manager., • Update Project Manager and Team Leader on workload status., • Apply fundamental engineering concepts to practical situations. Qualifications: • Bachelor's degree in Civil Engineering., • Two to four (2 - 4) years of experience in civil engineering, with experience leading design aspects of development projects preferred., • Proficiency in AutoCAD Civil 3D, Grading Design, Technical Writing, 3-D Modeling, MS Office, and Plan Interpretation., • Strong written and verbal communication skills., • Excellent workload management skills. Disclaimer While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you. Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team. #LI-EB1 Atwell Benefits: To attract and retain the best professionals in the industry, we aim to provide an excellent working environment and a progressive benefits program designed to support your personal and professional needs. Work/Life: • Generous Paid Time Off, • Paid Parental Leave, • Flexible work schedules are available for some positions, • Tenure Awards — Travel Vouchers to see the world based on your travel preferences Compensation: • Competitive Compensation packages, • Annual bonuses, spot bonuses and peer recognition awards, • 401K match - 1:1 up to 4% of compensation, • Tuition Assistance, • Student Loan Repayment, • Paid Licensing / Certification Fees and Renewals, • Financial Rewards for Obtaining Licensure, • Employee Referrals, • Annual Wellness Reimbursement for anything wellness related (Gym memberships, fitness tracker, home gym equipment, etc.), • Dependent Care Match 'Atwell'ness: • Medical (BC/BS), Dental (Delta), and Vision (VSP), • Family Planning & IVF Benefits, • Pet Insurance, • Health Savings Account & Flex Spending Account options, • Employer paid LTD, STD, and life insurance, • Metlife Supplemental Benefits covering accident, hospitalization, and critical illness, • Member Assistance Program (MAP) with complimentary counseling sessions, legal benefits, financial consultations, and work/life referral services

Job Description BB&E is an employee-owned, full-service civil and environmental engineering and consulting firm, headquartered in Northville, Michigan, which services both the Federal and Industrial sectors throughout the United States. BB&E team members provide Environmental Consulting, Facilities Engineering, and Program/Project Management Services to the Federal and private sectors. Position Summary BB&E is seeking a Cost Engineer to provide technical design support for NAVFAC Southeast in Jacksonville, Florida. The Structural Engineer will be responsible for the design, analysis, and review of new construction, repair, and renovation projects for Navy and Marine Corps facilities. This role supports mission-critical infrastructure efforts and requires collaboration with multidisciplinary teams to ensure high-quality, code-compliant designs that meet NAVFAC and DoD standards. Job Duties & Responsibilities • Provide independent, timely and professional cost engineering support, services and consultation for the planning, design, construction and maintenance of facilities for the Navy, Marine Corps, and other Supported Commands, including minor works projects, specific projects, special projects, military construction (MILCON), demolition, maintenance, space utilization and facilities development. Utilizing knowledge of engineering and architecture as it relates to cost., • Participate in planning, budgeting, designing and construction of substantial new construction, renovation and improvement projects for a variety of complex military construction projects., • Participate in conferences with project stakeholders and collaborate with other engineering and architectural disciplines to ensure system coordination and integration with specific project requirements. Requirements • Citizenship: U.S. Citizenship required; ability to obtain and maintain NACI/CAC eligibility is required., • Demonstrated experience preparing detailed analyses, drawings, and cost estimates for DoD or NAVFAC facilities or large-scale commercial facilities., • Certification as a Certified Cost Professional (CCP) as issued by the American Association of Cost Engineers or a Certification as a Certified Cost Engineer (CCE) issued by the DOD is desirable but not required., • Professional knowledge and skill in applying the theories, concepts, principles, computer system applications, and methodology of any one of the following engineering/architectural sciences: Architecture, Civil, Mechanical, or Electrical Engineering, relevant to the full range of construction activities; conduct of studies and analysis of requirements for cost, labor, and/or materials; evaluation and advice on cost estimates and contract change orders., • Professional knowledge of cost engineering concepts, theories, principles, practices, and techniques necessary to plan, design, construct and maintain a wide range of shore based engineering projects., • Knowledge of DoD and Navy cost engineering criteria and policy., • Knowledge of local, state, federal, and foreign country laws, codes, and other statutory requirements affecting cost engineering design throughout the NAVFAC Mid-Atlantic AOR., • Knowledge of related architectural and engineering fields and their associated impacts as related to cost engineering design., • Knowledge and experience with Autodesk software, Microsoft Office products, cost engineering software and other applicable DoD computer systems and software used by the Command., • Ability to produce results of analysis in writing; consolidate findings of others; and evaluate recommendations and facts., • Ability to communicate effectively to make oral presentations of proposed designs and results of studies., • Knowledge of budgeting, planning and project management techniques, including the ability to coordinate the work of others and lead teams., • Knowledge of and skill to work in full compliance with Safety Policy and Guidance, to include use of personal protective equipment. Experience & Education, • A minimum of 10 years of professional cost engineering accepted standard of practice (code) experience for new construction cost engineering, including renovation cost engineering experience, is required., • Education:, • Completion of a course of studies from the Accreditation Board for Engineers and Technology (ABET) or National Architectural Accrediting Board (NAAB) accredited program from a college or university leading to a bachelor's or master's degree in one of the following: electrical, mechanical, civil engineering or architecture., • The degree must also be supplemented by a considerable amount of hands-on design experience. It is desired that the candidate has 3-5 years of prior work experience in the design and/or construction fields and 5-10 years of cost engineering experience.Physical Requirements and Work Environment The physical demands and work environment may vary based on the position, assigned duties, and work location. Employees must be able to perform the essential functions of the position, with or without reasonable accommodation. • Remain in a stationary position for extended periods, • Use computers, telephones, and other office equipment, • Move throughout offices, facilities, and project sites, • Reach, grasp, handle equipment, and operate controls, • Communicate effectively and review documents, equipment, and site conditions, • Lift and carry materials or equipment weighing up to 50 pounds when required by the assignment, • Stand or walk for extended periods and occasionally climb, kneel, or crouch, • Navigate uneven or rough terrain when required, • Work indoors and outdoors in varying weather conditions, • Occasionally enter confined spaces or work at heights when required, • Wear required personal protective equipment, • Work in environments that may include noise, dust, fumes, chemicals, electrical hazards, construction activity, or other site specific conditions Limitations and Disclaimer This job description describes the general nature and level of work associated with the position. It is not intended to be an exhaustive list of all duties, responsibilities, qualifications, or working conditions. Employees may be assigned other job related duties consistent with applicable law. The duties and requirements described above are representative of those that may be necessary to perform the essential functions of the position, with or without reasonable accommodation. Benefits • Competitive compensation packages, • Participation in the Employee Stock Ownership Plan – BB&E is 100% employee-owned!, • Discretionary bonus, • *Medical, Dental, and Vision Insurance with health care concierge, • *Employer provided Short-Term & Long-Term disability, • *Employer-provided Life insurance, • *Employee options for supplemental life, supplemental accident, critical illness, hospital indemnity, and Identity theft protection benefits, • *Generous PTO plus 11 paid holidays, • Traditional & Roth 401(k) options with fully vested employer match, • Tuition reimbursement & professional development, • Employee referral program, • Employee discounts, • Employee Assistance Program (EAP), • Employee Homeownership Benefits, • Pet insurance discount *Applies only to full-time employees BB&E is an Equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws.

Job Description LNG Process Engineer Position Type: Full-time, Exempt, Salary Supervisory Responsibility: None Location: Jacksonville, FL Company Summary Stellar Energy Global Infrastructure provides state-of-the-art solutions customers build in for optimized energy performance now; and in the preparation for the energy needs of tomorrow. In business for 25 years, we’ve delivered added energy efficiency and capacity to customers in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Hyperscale deployment at the best possible speed to first megawatt. All delivered with the lower emissions required to support our partners’ unique sustainability objectives. Stellar Energy Global Infrastructure specializes in a wide range of engineering and manufacturing solutions within the energy sector including turbine inlet air chilling, central utility plants, district cooling, combined heat & power systems, thermal energy storage, inlet air heating, data center chilling, and inlet air chilling for LNG facilities. Additionally, our expertise extends to start-up & commissioning, system health analysis, services, and training. Our in-house team of skilled engineers and dedicated tradespeople are the reason we are the global leader in customized solutions. Stellar Energy Global Infrastructure strives to add value to today’s energy infrastructure, achieving secure, affordable, and sustainable energy that will help to create a responsible energy economy. Job Summary As a member of the technical staff, the LNG Process Engineer is responsible for performing process engineering and design activities in support of LNG facilities and modular energy systems through full production. This includes LNG process and utility system design, specification reviews, process simulations and calculations, equipment sizing and selection, and development of process deliverables to meet process, code, safety, and client requirements. The LNG Process Engineer conducts design reviews; coordinates with other disciplines, clients, vendors, and fabrication; and provides technical support for LNG-related products and projects currently in production. Essential Functions: • Undertake engineering and design work under the supervision of Senior Engineers and the Business Development Team, • Accomplish tasks within the company procedures, specifications, standards, and any project specific addenda., • Provide technical support to sales and marketing for bids and proposals, such as schematics, equipment selection and specification review., • Perform calculations and data analysis to accurately predict on impact product design decisions., • Prepare design deliverables including datasheet, specification, schedules, diagrams to enable procurement, supply, fabrication, installation, and construction to take place., • Support and organize vendor technical clarification meetings., • Prepare, modify, and maintain flow diagrams and P&ID's as well as equipment, instrumentation, and production specifications., • Provide technical assistance to the project team as required (e.g., subcontract evaluation, scope definition, design schematics etc.). Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies • Technical capacity., • Problem solving/analysis., • Excellent written and verbal communication., • Interpersonal and customer service skills. Work Environment Most work is performed in an office environment. Regular trips to the fabrication shop for observation and support may be necessary which may require the use of personal protective equipment such as safety glasses, steel-toed boots, and head protection. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. This is largely a sedentary role; however, some filing is required. This would require the ability to lift files, open filing cabinets and bend, or stand as necessary. The employee must occasionally lift or move up to 25 pounds. The employee must be able to bend, climb, stoop, or stretch as required to examine fabricated components at the site or fabrication shop. Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 8:00 a.m. to 5 p.m. Travel Anticipated 20% travel for this position. Some occasional local day travel may also be necessary. Required Education and Experience • Bachelor of Science degree in mechanical, structural, or chemical engineering from an ABET accredited university., • Minimum of five years of experience in supporting the design of industrial facilities., • Minimum of five years of process engineering experience supporting LNG, natural gas, cryogenic, petrochemical, or similar process facilities., • Working knowledge of LNG process systems, cryogenic service, refrigeration cycles, natural gas processing, and process safety requirements., • Experience developing and reviewing PFDs, P&IDs, process calculations, equipment datasheets, and process specifications for LNG or natural gas facilities., • Familiar with selection and technical requirement of general mechanical equipment such as pumps, chillers, cooling towers, heat exchangers, etc., • Familiar with local and international codes and standards, regulations and implementations., • Familiar with engineering deliverables Preferred Education and Experience • Knowledge of CAD software (AutoCAD preferred)., • Knowledge of pipe flow analysis and heat transfer software., • Experience with LNG or natural gas process simulation software such as Aspen HYSYS or equivalent., • Experience with LNG liquefaction, BOG management, cryogenic heat exchange, gas pretreatment, or refrigeration systems., • Experience participating in HAZOP, PHA, LOPA, SIL, or other process safety reviews. Work Authorization Must be authorized to work in the United States. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Stellar Energy Global Infrastructure, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Global Infrastructure, Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description BB&E is an employee-owned, full-service civil and environmental engineering and consulting firm, headquartered in Northville, Michigan, which services both the Federal and Industrial sectors throughout the United States. BB&E team members provide Environmental Consulting, Facilities Engineering, and Program/Project Management Services to the Federal and private sectors. Position Summary BB&E is seeking a dynamic and detail-oriented Senior Electrical Engineer to join our team supporting the Naval Facilities Engineering Systems Command Southeast (NAVFAC SE). The selected candidate will provide professional electrical engineering services in support of the planning, design, construction, and maintenance of facilities for the U.S. Navy, Marine Corps, and other supported commands. Work will be performed on-site in Jacksonville, Florida, utilizing Government-furnished equipment. This position is contingent upon contract award. The role includes support for military construction (MILCON), facilities sustainment, renovation, and infrastructure improvement projects. Job Duties & Responsibilities • Conduct field evaluation and generate review comments for electrical design proficiency in accordance with code standards for in-house and A&E design submittals; ensure comments are resolved and incorporated into the design; ensure A&E contract work has been satisfactorily completed, • Conduct site visits before design to perform assessments to generate electrical systems design requirements; assist with construction quality assurance (QA) by performing code-required special inspections or required electrical observations, • Witness acceptance testing and provide troubleshooting recommendations of electrical equipment and systems as part of the facility commissioning process, • Use AutoCAD and/or REVIT software, Microsoft Office products, electrical engineering design and analysis software, and other applicable DoD computer systems and software used by the Command, • Produce results of analysis in writing and consolidate findings of others and evaluate recommendations and facts; make oral presentations of proposed designs and results of studies, • Comply with Safety Policy and Guidance and use personal protective equipment, • Typical projects include new-build and renovation of administration, industrial, research, recreational, medical, security, waterfront, airfield, and living facilities Requirements • U.S. Citizenship and theability to obtain/maintain a NACI/CAC is required, • Certification: Registration as a Professional Engineer (PE) in the discipline of Electrical Engineering is required, • Knowledge:, • Knowledge of DoD and Navy guide specifications, criteria and policy, industry codes and standards, and standard practices as related to electrical engineering design, including the NFPA 70 (National Electrical Code), IEEE C2 (National Electrical Safety Code), and the International Building Code, • Knowledge of local, state, federal, and foreign country laws, codes, and other statutory requirements affecting electrical engineering design throughout the NAVFAC Mid-Atlantic AOR, • Knowledge of budgeting, planning, and project management techniques, including the ability to coordinate the work of others and lead teams, • Knowledge of related architectural and engineering fields and their associated impacts as related to electrical engineering design; specific design experience in interior and exterior lighting; facility power distribution systems, including standby power generation; telecommunication systems - including voice, data, cable TV and Wi-Fi; security systems including closed circuit TV; grounding systems; instrumentation/controls related to industrial processes, lightning protection systems; medical facility systems; audio visual systems; and site electrical distribution including medium-voltage distribution switchgear, substations, and transformers; site systems distribution; and overhead and underground distribution, • Strong Communication Skills: Excellent verbal and written communication skills, with the ability to effectively convey complex technical concepts to diverse audiences, • Software: Proficiency using Autodesk and/or REVIT, MS Office products, electrical engineering design and analysis software, and other applicable DoD systems and software used by the Command, • Self-Starter: Highly motivated, with the ability to manage multiple tasks and deadlines autonomouslyExperience & Education, • Experience: A minimum of 10 years of professional electrical engineering code-compliant facilities design experience for new construction, including renovation design experience, is required, • Education: A minimum of a Bachelor’s degree in Electrical Engineering from an Accreditation Board for Engineers and Technology (ABET) accredited college or university is requiredPhysical Requirements, • Ability to stand/walk/climb/kneel/crouch and remain in a stationary position/sit at least 60% of the time., • Ability to operate office equipment, including computer, copy machine, phone, etc., • Ability to use hands to finger, handle, or feel objects or controls; reach with hands and arms., • Capable of lifting up to 10 lbs., • Ability to see details of objects that are less than a few feet away., • Ability to understand the speech of another person, speak clearly so listeners can understand, and talk or hear both in person and by telephone. LIMITATIONS AND DISCLAIMER: The above job description is meant to describe the general nature and level of work being performed; it is not intended as an exhaustive list of all duties, responsibilities and required skills for the position. Employees will be required to follow any other job-related instructions and to perform other duties requested by their supervisor in compliance with Federal and State Laws. Required are representative of minimum levels of knowledge, skills and/or abilities necessary to perform each duty proficiently. Continued employment remains on an "at-will" basis. Benefits • Participation in the Employee Stock Ownership Plan – BB&E is 100% employee-owned!, • Discretionary bonus, • *Medical, Dental, and Vision Insurance with health care concierge, • *Employer provided Short-Term & Long-Term disability, • *Employer-provided Life insurance, • *Employee options for supplemental life, supplemental accident, critical illness, hospital indemnity, and Identity theft protection benefits, • *Generous PTO plus 11 paid holidays, • Traditional & Roth 401(k) options with fully vested employer match, • Tuition reimbursement & professional development, • Employee referral program, • Employee discounts, • Employee Assistance Program (EAP), • Employee Homeownership Benefits, • Pet insurance discount *Applies only to full-time employees. BB&E is an Equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws.

Job Description BB&E is an employee-owned, full-service civil and environmental engineering and consulting firm, headquartered in Northville, Michigan, which services both the Federal and Industrial sectors throughout the United States. BB&E team members provide Environmental Consulting, Facilities Engineering, and Program/Project Management Services to the Federal and private sectors. Position Summary BB&E is seeking a Structural Engineer to provide technical design support for NAVFAC Southeast in Jacksonville, Florida. The Structural Engineer will be responsible for the design, analysis, and review of new construction, repair, and renovation projects for Navy and Marine Corps facilities. This role supports mission-critical infrastructure efforts and requires collaboration with multidisciplinary teams to ensure high-quality, code-compliant designs that meet NAVFAC and DoD standards. Job Duties & Responsibilities • Provide specialized structural engineering support for planning, design, and construction of Navy and Marine Corps facilities., • Prepare and review structural calculations, design analyses, specifications, and construction drawings for concrete, steel, masonry, and timber structures., • Support development of project scopes, design documentation, and cost estimates for military construction (MILCON), facility repair, and renovation projects., • Conduct field investigations, site assessments, and structural condition evaluations to identify required repairs or modifications., • Review design-build packages, contractor submittals, and shop drawings for technical accuracy and compliance with NAVFAC and UFC criteria., • Ensure coordination of structural design with architectural, civil, mechanical, and electrical disciplines., • Apply current Unified Facilities Criteria (UFC), DoD, and ASCE standards to design deliverables., • Participate in design reviews, constructability assessments, and value engineering studies., • Provide technical support during construction, including RFI responses, design clarifications, and on-site problem resolution., • Prepare reports, design summaries, and technical recommendations for project managers. Requirements • Citizenship: U.S. Citizenship required; ability to obtain and maintain NACI/CAC eligibility is required., • Demonstrated experience preparing detailed analyses, drawings, and cost estimates for DoD or NAVFAC facilities or large-scale commercial facilities., • Proficient with structural modeling software (STAAD Pro, SAP2000, RAM)., • Knowledge of DoD and Navy design standards, Unified Facilities Criteria (UFC), ASCE 7, IBC, and federal design standards and requirements., • Familiarity with federal, state, and local codes and regulations related to building and structural design., • Strong written and verbal communication skills and ability to present design concepts and findings effectively., • Experience with project budgeting, scheduling, and multi-discipline coordination., • Commitment to NAVFAC safety policies and proper PPE usage during site visits and inspections.Experience & Education, • Education: Bachelor's degree in civil engineering with emphasis in Structural Engineering from an ABET-accredited program required; Master's preferred., • Experience: Minimum of 5 years of structural engineering design experience, including at least 1 year on Federal or DoD projects., • Licensure: Professional Engineer (PE) registration in Civil or Structural Engineering preferred., • Software: Autodesk (AutoCAD/Revit), Microsoft Office, and structural analysis software (STAAD Pro, RAM, SAP2000). Physical Requirements and Work Environment The physical demands and work environment may vary based on the position, assigned duties, and work location. Employees must be able to perform the essential functions of the position, with or without reasonable accommodation. • Remain in a stationary position for extended periods, • Use computers, telephones, and other office equipment, • Move throughout offices, facilities, and project sites, • Reach, grasp, handle equipment, and operate controls, • Communicate effectively and review documents, equipment, and site conditions, • Lift and carry materials or equipment weighing up to 50 pounds when required by the assignment, • Stand or walk for extended periods and occasionally climb, kneel, or crouch, • Navigate uneven or rough terrain when required, • Work indoors and outdoors in varying weather conditions, • Occasionally enter confined spaces or work at heights when required, • Wear required personal protective equipment, • Work in environments that may include noise, dust, fumes, chemicals, electrical hazards, construction activity, or other site-specific conditions Limitations and Disclaimer This job description describes the general nature and level of work associated with the position. It is not intended to be an exhaustive list of all duties, responsibilities, qualifications, or working conditions. Employees may be assigned other job related duties consistent with applicable law. The duties and requirements described above are representative of those that may be necessary to perform the essential functions of the position, with or without reasonable accommodation. Benefits • Competitive compensation packages, • Participation in the Employee Stock Ownership Plan – BB&E is 100% employee-owned!, • Discretionary bonus, • *Medical, Dental, and Vision Insurance with health care concierge, • *Employer provided Short-Term & Long-Term disability, • *Employer-provided Life insurance, • *Employee options for supplemental life, supplemental accident, critical illness, hospital indemnity, and Identity theft protection benefits, • *Generous PTO plus 11 paid holidays, • Traditional & Roth 401(k) options with fully vested employer match, • Tuition reimbursement & professional development, • Employee referral program, • Employee discounts, • Employee Assistance Program (EAP), • Employee Homeownership Benefits, • Pet insurance discount *Applies only to full-time employees BB&E is an Equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws.

Job DescriptionSENIOR ORACLE HCM DEVELOPER - REMOTE ARC Group has an immediate opportunity for a Senior Oracle Developer with strong experience working with the HCM module! This position is 100% remote working eastern time zone business hours. This is starting out as a contract position running through August 2025 with strong potential to extend longer or convert to FTE. This is a fantastic opportunity to join a well-respected organization offering tremendous career growth potential. At ARC Group, we are committed to fostering a diverse and inclusive workplace where everyone feels valued and respected. We believe that diverse perspectives lead to better innovation and problem-solving. As an organization, we embrace diversity in all its forms and encourage individuals from underrepresented groups to apply. 100% REMOTE! Candidates must currently have PERMANENT US work authorization. Sorry, but we are not considering any candidates from outside companies for this position (no C2C, 3rd party / brokering). Job Description: As an Oracle PL/SQL Developer, you will be a key member of the Database Group responsible for providing overall database support with concentration in back-end programming. The PL/SQL Developer will be responsible to properly maintain source code sets and necessary technical documentation and assist the DBA's in overall database maintenance. In this role, you'll leverage your knowledge of Oracle database development and be instrumental in the successful implementation of our browser-based, enterprise software product. Qualifications Must possess expert programming and troubleshooting skills Must possess expert performance tuning skills and dynamic SQL skills Must be willing to jump into anyones code at any time to solve the problem Must be able to reverse engineer anyone elses code and be able to modify it to solve the problem in a better or more efficient way Experience with Oracle Version 10g, 11g, 12c Strong experience with oracle functions, procedures, triggers, packages & performance tuning Ensure that database programs are in compliance with V3 standards Performance tune SQL's, application programs and instances Experience mentoring / or leading other development staff Proven leadership abilities including effective knowledge sharing, conflict resolution, facilitation of open discussions, fairness and displaying appropriate levels of assertiveness 24x7 Production support experience supporting a large scale Experience with complex indexing strategies including column store indexing Required Work Experience: 5+ years related work experience, Professional experience with technical design and coding in the IT industry Musts: -Oracle HCM Cloud experience working HCM Extracts, BIP Reports, OTBI, Fast Formulas, Value Sets, OIC -Automated testing experience - Selenium (or similar) -Functional knowledge with Core HR, Benefits, Payroll, Talent Management, Absence Management -Experience with data conversion from other HCM systems to Oracle HCM Cloud Required Education: Related Bachelors degree or related work experience Would you like to know more about our new opportunity?For immediate consideration, please apply online and view all our open positions at www.arcgonline.com. ARC Group is a Forbes-ranked a top 20 recruiting and executive search firm working with clients nationwide to recruit the highest quality technical resources. We have achieved this by understanding both our candidate's and client's needs and goals and serving both with integrity and a shared desire to succeed. At ARC Group, we are committed to providing equal employment opportunities and fostering an inclusive work environment. We encourage applications from all qualified individuals regardless of race, ethnicity, religion, gender identity, sexual orientation, age, disability, or any other protected status. If you require accommodations during the recruitment process, please let us know. Position is offered with no fee to candidate.

Job Description Do you like working with different project teams in a fast-paced environment? Are you interested in joining an organization focused on making a positive impact? If so, we'd like to talk with you about growing with us. EnSafe is seeking an Environmental Remediation Project Engineer to join our team of professionals in one of our Florida offices: Tampa, Jacksonville, or Pensacola. The successful candidate must be willing to work at one of EnSafe Florida's Offices listed. Relocation assistance is available to meet this expectation. What we are looking for: We are seeking an Environmental Remediation Project Engineer who is ready to support and manage a variety of projects using innovative remedial technologies to address various contaminants in soil, groundwater, industrial wastewater, stormwater, and air. The right candidate will enrich our team of engineers and scientists in providing solutions to address contaminants such as PFAS, 1,4-dioxane, chlorinated solvents, and heavy metals for sites regulated under state, CERCLA, and RCRA laws. Joining our team means working in a collaborative, innovative, and supportive environment where you can make an impact and grow your career. Key responsibilities of this position include: • Lead and support remedial and process engineering projects and teams to fill data gaps, design, construct, operate, and optimize systems., • Plan and perform assessments, pilot tests, construction oversight, and remedy O&M., • Evaluate data from aquifer tests, pilot studies, bench testing, sampling events, and modeling to develop remedial strategies., • Prepare, review, and mentor others in the development of design basis, technology feasibility analyses and selection, and design plans, specifications, and reports., • Communicate with regulatory personnel and permitting agencies to ensure compliance with project requirements and applicable regulations., • Provide project and client management from small dry cleaners/gas stations to complex industrial facilities to major federal facilities., • Prepare proposals, cost estimates, and long-term projections for remediation projects., • Provide technical assistance to teams working across multiple offices throughout the country, problem-solving, mentoring, leading by example, and participating in corporate technical initiatives. Minimum Skills and Requirements: • Bachelor's degree from an ABET-accredited college in Civil, Chemical, Mechanical, or Environmental Engineering., • 7-15 years of relevant experience required., • P.E. required., • Strong knowledge of FDEP, CERCLA, RCRA, and other environmental regulations, legislation, and SOPs., • Hands-on experience with remediation technologies and O&M for soil, groundwater, stormwater, industrial wastewater, and air for a wide range of contaminants., • Experience with remedial system instrumentation and controls, as well as remote telemetry, is a plus., • Strong consulting, problem-solving, and leadership skills., • A valid driver's license., • Ability to travel overnight. Why Join EnSafe? • Employee-Owned Advantage EnSafe is 100% employee-owned, with an ESOP (Employee Stock Ownership Plan) since 1997. That means when EnSafe succeeds, you succeed too, turning company growth directly into shared rewards. • Commitment to Growth and Wellness The company supports personalized career development, mentorship, and employee wellness initiatives such as health tracking tools. • Purpose‑Driven Work EnSafe's mission focuses on impactful environmental, health, and safety consulting—making a real difference in communities and is backed by its long-standing technical credibility. • Safety as a Value, Not Just a Service Safety is deeply embedded in our culture, prioritizing employee well-being in addition to helping clients maintain compliance. We stress that "safety is part of everything we do." • A Culture of Freedom & Ownership At EnSafe, our career philosophy is built on freedom. The freedom to take initiative, achieve your goals, and shape your own career path Employees are encouraged to pursue growth in a flexible, entrepreneurial environment. • Challenging, Creative Work Workdays at EnSafe are anything but ordinary, fast-paced, dynamic, and filled with opportunities to tackle projects in environmental consulting, health & safety, engineering, and technology. Every day calls for creativity, innovation, and agile problem-solving. #LI-MJ1 #:LI-Onsite About EnSafe EnSafe began as a two-person firm in 1980, navigating complex regulatory compliance issues on behalf of our clients. We nurture our people with growth and development opportunities. We build enduring, trustful relationships with each of our clients, with a focus on high ethical and safety standards. We build this reputation by attracting high-quality people and retaining them for the long term. At EnSafe, we are dedicated to fostering a diverse and authentic workplace, so if you're excited about this role but your experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles at our company. EnSafe is committed to being an EEO employer and all qualified candidates will receive consideration without regard to race, color, religion, national origin, citizenship, age (except for bona fide occupational qualifications), sex, disability, sexual orientation, gender identity, marital status, military or veteran status, any other status protected by federal, state, or local law, or association with a person on the basis on one or more of the foregoing. Check us out on the web at www.ensafe.com Applicant Privacy Notice | AI use in Hiring

Job Description Stratus® is an integrated, multi-disciplinary engineering, architecture, interior design, and consulting firm. Consistently ranking among the Top 500 Design Firms in Engineering News-Record, the firm offers a deep bench of industry experts through a highly collaborative approach, delivering innovative solutions across the full project lifecycle. Operating coast to coast, Stratus® serves clients nationwide while maintaining a strategic commitment to supporting high-growth economies and building vibrant communities that foster the professional growth of its team. Serving public- and private-sector clients, the firm is dedicated to delivering the highest-quality service wherever projects take shape. Across the Civic, Commercial, Industrial, Transportation, Education, Water Resources, and Government sectors, we bring precision, insight, and purpose to every project, from targeted renovations to large-scale infrastructure. Stratus® designs spaces, systems, and solutions that perform, endure, and make an impact, delivering on our promise of Better Plans. Better Places. The Role The Principal Engineer (PE) is responsible for providing senior-level technical leadership on engineering projects. This role focuses on leading the design, analysis, and construction of major projects, offering expert technical guidance to project teams, and serving as the firm’s subject matter expert. The Principal Engineer plays a key role in project success by ensuring that designs meet client expectations, regulatory standards, and technical requirements. Responsibilities • Lead the design and development of complex engineering projects, providing expert technical guidance to project teams., • Provide leadership and oversight for a multidisciplinary team of MEP engineers., • Prepare detailed engineering drawings, calculations, and technical reports, ensuring compliance with regulatory standards and client expectations., • Serve as the primary technical expert on projects, resolving complex design challenges and ensuring that engineering solutions are innovative and technically sound., • Provide mentorship and technical leadership to junior engineers, fostering their professional growth and ensuring technical excellence across the team., • Conduct quality control reviews at key project milestones to ensure accuracy, technical precision, and adherence to project goals., • Collaborate with multidisciplinary teams, including architects, contractors, and consultants, to ensure the seamless integration of engineering systems into overall project designs., • Oversee construction administration tasks, including reviewing submittals, conducting site visits, and addressing technical issues during construction., • Participate in client meetings and presentations, offering technical expertise and ensuring that client needs are met throughout the project lifecycle., • Stay current with industry advancements, emerging technologies, and innovative materials, incorporating new solutions into the firm’s engineering designs., • Provide strategic input on business development efforts, assisting with proposals and client presentations to secure new projects. Qualifications Required • Licensed Professional Engineer (PE)., • Bachelor’s or Master’s degree in engineering from ABET-accredited university., • 10-15 years of experience in engineering design and project management., • Strong leadership and mentorship skills for guiding junior engineers and project teams., • Ability to lead large-scale engineering projects and provide expert-level technical guidance., • Ability to communicate complex technical concepts to both technical and non-technical stakeholder., • Minimum 7 years of progressive MEP engineering experience with a focus on building systems design. Preferred • Experience leading large, complex engineering projects. Why you’ll love Stratus • A team-oriented environment that values transparency, creativity, and shared success, • Meaningful career paths, leadership opportunities, and space to specialize, • Learning & Development – Education and Professional Licensing, • We believe flexible, hybrid work supports the balance and well-being our team deserves, • Excellent Health Care Programs – Medical, Dental, and Vision Insurance, • Company-paid Life Insurance, Short-Term Disability, and Long-Term Disability, • Voluntary Life Insurance options for employees, spouses, and dependents, • 401k Retirement Plan with employer match, • Paid Holidays & Competitive PTO plans Interested in learning more about Stratus, please visit https://www.stratusteam.com/. Equal Opportunity Statement Stratus is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth, pregnancy-related conditions, and lactation), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information, or any other characteristic protected by applicable federal, state, or local laws and ordinances. Stratus Team’s management Team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, access to facilities and programs, and general treatment during employment. #LI-MV1

Job Description Workplace Type: Hybrid About Us: Pickett, an ESP Associates company, is a highly innovative surveying and engineering company with over 60 years of industry experience serving clients throughout the US and Caribbean. At Pickett, we use the acronym S.O.L.V.E. to define our core values that include: Safety first, Outstanding service, Lasting relationships, Valued teamwork and Engaged culture. “We solve the problems that matter” and we are always looking to add passionate, motivated, and qualified individuals to our rapidly expanding team. About The Role: In this role, you will be responsible for the structural design and analysis of substation and transmission systems. What You Will Be Doing: • Structural Design and analysis of substation structures including dead-end structures, equipment supports, and bus structures, • Structural design and analysis of transmission structures such as lattice towers, monopoles (steel and concrete), wood poles, and specialty structures, • Evaluation and retrofitting of existing lattice towers, including capacity assessments and development of reinforcement solutions, • Preparation of engineering calculations, drawings, and technical specifications in accordance with applicable codes and standards (ASCE, AISC, ACI, IEEE, NESC), • Structural modeling and analysis using PLS-TOWER, PLS-POLE, STAAD, and/or RISA, • Foundation design using LPILE, MFAD, HFAD, and TFAD, supported by manual calculations in Mathcad and Excel, • Design of drilled shafts, spread footings, anchors, and direct-embedded pole foundations, • Review of vendor calculations and drawings, • Coordination with fabrication and construction teams, • Collaboration with civil, electrical, and geotechnical engineers to ensure fully integrated project design and delivery, • Field support including site visits, construction support, and structural inspections, • Contribution to proposals, technical specifications, and engineering deliverables as needed What You Bring:, • Bachelor’s degree in Civil or Structural Engineering (required), • Professional Engineer (PE) license (required), • Minimum 4 years of relevant experience in substation and/or transmission structural engineering, • Proven experience with lattice towers, monopoles, wood poles, and/or specialty structures, • Experience performing analysis and retrofit design of existing lattice towers, • Proficiency in structural analysis software including PLS-TOWER, PLS-POLE, STAAD, and RISA, • Proficiency in foundation design software including LPILE, MFAD, HFAD, and TFAD, along with strong capability in Mathcad and Excel-based engineering calculations, • Working knowledge of applicable industry standards including ASCE, AISC, ACI, NESC, and IEEE., • Strong written, verbal, and technical communication skills, • Ability to manage multiple priorities and meet deadlines in a fast-paced environment, • Ability to successfully pass a drug screen, background check, and maintain a satisfactory motor vehicle record (MVR) in accordance with company polic, • Strong engineering judgment and ability to evaluate and resolve complex design issues, • Ability to apply engineering theory and principles to practical field and design challenges, • A proactive mindset for identifying improved engineering solutions, processes, and tools, and effectively communicating and implementing them, • Commitment to safety and consistent adherence to all applicable safety standards and procedures, • Self-starter mentality with the ability to thrive in a less structured, project-driven environment, • Strong collaboration skills with peers and stakeholders across the electrical utility industrySo...Why Join Us? You will have the opportunity to learn, grow and directly contribute to our business. You will also have a very visible and tangible impact by solving real world problems. You will contribute significantly to the growth and development of our company while also continuing to be challenged and inspired along the way! Pickett offers an excellent employee benefits package including: • Competitive compensation with yearly performance reviews and discretionary annual bonuses, • 401(k) (Traditional & Roth plans) with a guaranteed employer match of 100% up to the first 3% and 50% on the next 2% (eligibility after 60 days), • PTO (Paid Time Off) & 10 Paid Holidays, • VTO (Volunteer Time Off) of 4 hours each year (prorated during first year based on hire date), • Tiered Health, Vision & Dental Insurance Options (eligibility after 30 days), • Behavioral Medicine through Teladoc, • Short-Term Disability Insurance (Employer Paid), • Long-Term Disability Insurance, • Life Insurance, • Pet Insurance, • Education Reimbursement Opportunities, • Flexible and Dependent Benefits Plan, • Referral Bonuses

Job DescriptionDescription: Position Summary American Refrigeration is seeking a motivated and mechanically minded Sales Engineering Associate to join our growing Sales Engineering team. Whether you have experience as an industrial refrigeration technician, project engineer, or mechanical engineer, this role provides an opportunity to build upon your technical knowledge while developing the skills needed to engineer and deliver complex industrial refrigeration projects. As a Sales Engineering Associate, you will work directly alongside experienced Sales Engineers and Service Account Managers, receiving hands-on mentorship while learning every aspect of project development from customer site visits and estimating to equipment selection, proposal development, and construction planning. No prior estimating or sales experience is required. We are looking for individuals with strong mechanical aptitude, excellent problem-solving skills, and a desire to continue learning. American Refrigeration will provide the technical training and mentorship needed to become a successful Sales Engineer. This position offers a defined career path toward becoming a Sales Engineer responsible for developing and managing multimillion-dollar industrial refrigeration projects. Work Environment · Engineering and estimating in an office environment · Customer facility visits · Equipment inspections and field verification · Jobsite walkthroughs · Collaboration with engineering, construction, and service personnel · Regional travel throughout the southeastern United States Training & Development · Industrial ammonia refrigeration systems · Freon and CO2 refrigeration systems · Refrigeration load calculations · Equipment selection and sizing · Controls and system operation · Estimating and project costing · Proposal development · Sales engineering techniques · Customer relationship management · Construction coordination · Mechanical codes and industry standards (IIAR, ASME, OSHA) Why American Refrigeration? American Refrigeration designs, builds, and services some of the most complex industrial refrigeration systems in North America. Our projects support food processing facilities, cold storage warehouses, distribution centers, manufacturing plants, and industrial process cooling systems utilizing ammonia, CO2, and synthetic refrigerants. Our Sales Engineering team serves as the technical bridge between our customers and our engineering, construction, and service organizations. We work closely with customers to develop practical, reliable, and cost-effective solutions from concept through construction. If you enjoy mechanical systems, solving complex engineering challenges, working directly with customers, and seeing projects come to life, you'll find this role both challenging and rewarding Compensation & Benefits American Refrigeration offers a competitive compensation and benefits package designed to support your professional growth and long-term career success, including: · Competitive salary based on experience · Performance-based bonus opportunities · Medical, dental, and vision insurance · 401(k) with company match · Paid vacation and holidays · Company-paid training and professional development · Opportunities for industry certifications and continuing education · Company laptop · Mileage reimbursement or company vehicle (as applicable) · Clear career advancement opportunities within a growing organization Requirements: Preferred Experience · Industrial refrigeration service · Mechanical contracting · Construction management · Project engineering · Mechanical engineering · Industrial maintenance · Process piping · Equipment installation Additional qualifications include: · Bachelor's degree in mechanical engineering, Mechanical Engineering Technology, Construction Management, Industrial Engineering, or a related field preferred but not required. · Industrial refrigeration experience is highly desirable. · Strong mechanical aptitude and willingness to learn. · Ability to read or willingness to learn P&IDs, mechanical drawings, and equipment submittals. · Strong communication and organizational skills. · Proficiency with Microsoft Office. · Experience with Bluebeam, AutoCAD, estimating software, or ERP systems is a plus. · Ability and willingness to travel throughout assigned territories. Who Will Be Successful · Mechanically curious · Self-motivated · Detail-oriented · Comfortable interacting with customers · Organized and dependable · Team-oriented · Adaptable to changing priorities · Interested in continuous learning and professional development

Job Description We are seeking a hands-on ServiceNow Claims Lead Engineer to serve as the technical subject matter expert (SME) for a highly customized specialty claims platform built on ServiceNow. This role is focused on architecture, design, and hands-on development, working closely with engineering leadership, product stakeholders, and a Software Integrator (SI) to deliver scalable, high-quality solutions. The platform leverages ServiceNow Customer Service Management (CSM), App Engine, and Integration Hub with extensive scripted customizations and complex integrations across policy administration, financial systems, and enterprise data platforms. This role is ideal for someone who enjoys building and evolving complex platforms, staying close to the code, and acting as the go-to technical authority for ServiceNow architecture and implementation. Key Responsibilities: Platform Architecture & Technical Ownership • Serve as the ServiceNow technical authority (SME) for the claims platform., • Design and evolve claims data models, workflows, case structures, and automation to support complex business processes., • Architect solutions using CSM and App Engine to enable highly customized, non–out-of-the-box functionality., • Define and maintain technical standards, patterns, and best practices for the platform., • Ensure architectural decisions balance flexibility, performance, maintainability, and long-term scalability. Hands-On Development & Solution Design • Actively contribute to development, including ServiceNow scripting (JavaScript, Script Includes, Business Rules, UI logic)., • Build prototypes, reference implementations, and reusable components., • Review and guide implementation work delivered by internal engineers and the SI., • Lead technical design sessions and provide clear direction on solution approaches., • Drive consistency and reuse across platform components. Integration & Data Architecture • Design and implement integrations using ServiceNow Integration Hub, including custom actions and orchestration., • Build and support both:, • Real-time transactional integrations, • Batch-based data pipelines, • Integrate with:, • Policy administration systems, • Financial and accounting platforms, • Enterprise data warehouse / analytics systems, • Apply strong understanding of:, • Synchronous vs. asynchronous processing, • Data consistency and reliability across distributed systems SDLC & Platform Quality • Contribute to and help enforce SDLC practices, including design standards, code quality, and release processes., • Support platform stability through involvement in production support, troubleshooting, and root cause analysis., • Ensure solutions are built with operational readiness, observability, and performance in mind., • Continuously identify opportunities to improve platform quality, maintainability, and developer experience. Collaboration & Technical Partnership • Partner closely with engineering leadership, product teams, and the SI to translate business needs into technical solutions., • Act as a trusted technical advisor across engineering and business stakeholders., • Mentor developers on ServiceNow best practices and architectural patterns. The above cited duties and responsibilities describe the general nature and level of work performed by people assigned to the job. They are not intended to be an exhaustive list of all the duties and responsibilities that an incumbent may be expected or asked to perform Required Qualifications • 8+ years of software engineering experience with strong hands-on ServiceNow development., • Deep experience with:, • ServiceNow CSM, • App Engine (custom applications), • Integration Hub (custom actions and orchestration), • Proven experience working in heavily customized ServiceNow environments with significant scripted logic., • Strong experience designing and implementing enterprise integrations and data pipelines., • Solid understanding of:, • Event-driven architecture, • Sync vs. async integration patterns, • Distributed data consistency, • Ability to contribute directly to code and guide implementation teams., • Strong communication skills and ability to influence technical decisions. Preferred Qualifications • Experience building or supporting financial or insurance domains, • ServiceNow certifications (CSA, CAD, CIS-CSM) preferred but not required., • Experience operating in regulated or compliance-driven environments. Applicants must be authorized to work for any employer in the United States. We are unable to sponsor or assume sponsorship of employment visas at this time. We welcome applicants of all backgrounds and national origins The anticipated salary for this position is $120,000 - $180,000+ per year, based on qualifications and experience. Recruitment Updates Fortegra has recently been made aware of unauthorized communications regarding career opportunities by individuals not associated with Fortegra or our recruitment team. Fortegra will only contact you from the Fortegra domain address (@fortegra.com). If you receive a message from someone posing as a Fortegra recruiter via text message, WhatsApp, Telegram or other messaging platform, please report it as phishing and block the sender. Fortegra is not accepting unsolicited resumes from search firms for this position. #LI-Onsite

Job DescriptionSenior AI Developer AWS / Agentic AI / Intelligent Document Processing Jacksonville, FL | 100% Remote ARC Group is recruiting for a Senior AI Developer with a Fortune 500 company headquartered in Jacksonville, Florida. This is an opportunity to help build the next generation of intelligent unstructured data management and Intelligent Document Processing (IDP) solutions at enterprise scale. This is a highly technical, hands-on role for an experienced AI/software engineer who can design, develop, and deploy cloud-native AI solutions across the full development lifecycle. About the Role You will work at the intersection of AI engineering, backend development, cloud architecture, and enterprise data management to deliver transformative solutions for unstructured data. The environment includes AWS, Amazon Bedrock, S3, Snowflake, AgentCore, LangGraph, MCP, A2A frameworks, vector databases, and workflow orchestration technologies. The ideal candidate has actually built and deployed production AI solutions and can connect modern AI capabilities with enterprise-grade backend services, data platforms, security, and workflow automation. Key Responsibilities • AI & Intelligent Document Processing: Design and develop AI-powered solutions that ingest, classify, extract, enrich, and route information from unstructured documents and data., • Agentic AI Development: Build and integrate autonomous AI agents using technologies such as AWS AgentCore, LangGraph, MCP, and A2A frameworks., • AWS Cloud Architecture: Develop secure, scalable cloud-native solutions using AWS, S3, compute services, networking, and Amazon Bedrock., • Backend Development: Build production-grade APIs, microservices, synchronous/asynchronous services, and event-driven applications., • Workflow Orchestration: Design and implement reliable, auditable workflows using AWS Step Functions, Airflow, Temporal, or comparable orchestration technologies., • Data & AI Platforms: Develop solutions leveraging Snowflake, vector databases, RAG architectures, and enterprise data pipelines., • LLM & Foundation Models: Apply LLMs, foundation models, prompt engineering, embeddings, retrieval, and other modern AI techniques., • Data Governance & Security: Implement data cataloging, lineage, retention, protection, and governance practices with a strong focus on security and HIPAA compliance., • Enterprise Integration: Develop solutions integrating AI agents, automation platforms, data services, and downstream enterprise applications., • Collaboration & Mentorship: Work with data engineers, architects, platform teams, and business stakeholders while mentoring junior engineers.Required Qualifications, • 5+ years of professional software development experience, including at least 2 years focused on AI/ML, generative AI, or data engineering in production environments., • Strong experience developing backend services, APIs, microservices, or event-driven applications., • Hands-on experience with AWS, including S3 and EC2 or comparable AWS compute services., • Experience with Snowflake or a comparable modern cloud data platform., • Production experience with AI/ML development and deployment, including LLMs, foundation models, prompt engineering, RAG, and agentic AI., • Experience with workflow orchestration using AWS Step Functions, Apache Airflow, Temporal, or similar technologies., • Strong understanding of data modeling, data pipelines, data quality, and data governance., • Experience with CI/CD, automated testing, code reviews, security, and production support., • Bachelor's degree in Computer Science, Data Science, Engineering, or a related field, or equivalent professional experience.Technology Must-Haves Hands-on professional experience with the following technologies is strongly preferred:, • AWS, • Amazon S3, • Amazon Bedrock, • AWS AgentCore, • MCP (Model Context Protocol), • A2A / Agent-to-Agent Frameworks, • Vector Databases, • Snowflake, • Workflow Orchestration / Workflow Development, • LLMs / Generative AI, • RAG / Retrieval-Augmented Generation, • Backend/API DevelopmentPreferred Qualifications, • Direct experience developing Intelligent Document Processing (IDP) solutions., • Experience with OCR, ICR, NLP, information extraction, document classification, or document understanding., • Hands-on experience with AWS Bedrock, Claude, AgentCore, LangGraph, or similar technologies., • Experience implementing MCP and A2A integration patterns., • Experience designing and implementing RAG and vector-search solutions., • Experience with unstructured data platforms and enterprise AI solutions., • Healthcare industry experience, particularly working with HIPAA-regulated data., • Experience integrating AI solutions into enterprise workflow and automation platforms., • Master's degree in Computer Science, Data Science, Artificial Intelligence, or a related field.What We're Looking For We are looking for a hands-on Senior AI Developer, not simply a traditional software engineer who has experimented with generative AI tools. The strongest candidates will have production experience building AI solutions and can demonstrate the ability to connect: • LLMs / Agents + AWS + Bedrock + Snowflake + Vector Databases + Workflow Orchestration + Backend Services, • into secure, scalable enterprise applications., • Candidates with direct experience in AgentCore, MCP, A2A, Bedrock, Snowflake, S3, and vector databases will be especially valuable.Work Experience5+ years of related professional experience, including technical design and hands-on software development within the IT industry. Education Bachelor's degree in Computer Science, Data Science, Engineering, or a related field, or equivalent professional experience. Work Authorization & Location • Work Authorization: U.S. Citizen or Green Card holder only. No C2C., • Time Zone: Candidates must be located in the Eastern Time Zone or Central Time Zone. Eastern Time Zone candidates are preferred., • Recruiter Submissions: No third-party recruiters or recruiter-represented candidates will be accepted.

Job DescriptionJob Summary: A Senior Structural Engineer plays a pivotal role in the development and implementation of engineering projects, ensuring the structural integrity and safety of buildings and infrastructure. This position involves advanced technical knowledge, project management skills, and leadership abilities to guide junior engineers and designers collaborating with cross-functional teams. Duties/Responsibilities: • Lead the design and analysis of complex structural systems for buildings, such as but not limited to steel, reinforced concrete, precast, Tilt- Up, masonry, and shallow and deep foundations. Utilize advanced software and tools to model and simulate structural behavior under various loads and conditions., • Ensure compliance with relevant codes, standards, and regulations., • Oversee the planning, scheduling, and execution of structural engineering projects from inception to completion., • Coordinate with architects, contractors, and other stakeholders to ensure project objectives are met., • Develop economical, high-performance options and implement final selected design solutions., • Manage project budgets, timelines, and resources effectively., • Provide mentorship and guidance to designers, junior engineers and technical staff., • Review and approve submittals, technical drawings, calculations, and reports., • Conduct site visits and assessments to ensure construction quality and adherence to design drawings and specifications., • Stay abreast of industry trends, advancements, and best practices in structural engineering., • Identify opportunities for innovation and improvement in design and construction methodologies., • Contribute to the development of discipline design standards, policies, and procedures., • Other duties as assignedRequired Skills/Abilities:, • Expertise in structural analysis, structural design software, and FEM (e.g., RAM, ENERCALC, RISA, and similar), • Proficient in AutoCAD, Revit, and other drafting and modeling tools., • Strong understanding of building codes, standards, and regulations (e.g., AISC, ACI, ASCE)., • Ability to develop force resisting systems for lateral, gravity and dead load paths and loading combinations., • Prepare design solutions for complex and unique structural challenges., • Evaluate member assemblies and systems, delegating connection design and specialize systems and components., • Share experience and expertise with others, • Develop training programs to expand the younger engineer's ability to achieve long-term success., • Excellent communication and interpersonal skills, with the ability to collaborate effectively with diverse teams., • Strong problem-solving and analytical skills., • Leadership qualities with the ability to mentor and develop junior engineers., • Attention to detail and a commitment to quality and safety. Education/Experience:, • Bachelor of Science degree in Civil Engineering, Structural Engineering, or Architectural Engineering., • Master's degree is preferred., • Minimum of 8-10 years of experience in structural engineering, with a proven track record of successful project delivery., • Experience in leading and managing large-scale structural engineering projects. Travel Requirements:, • Flexibility to travel on short notice for urgent business needs, to attend meetings, trainings, and events., • Maintain a professional demeanor and appearance during business trips., • Compliance with company travel policies and procedures. Physical Requirements: Ability to sit, stand, and walk for long periods of time. Ability to use a computer, phone, printer, scanner, and other office equipment. Visual acuity for detailed work and computer use Ability to lift, carry, and move up to 25 pounds of files, documents, and materials. About Stellar Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Remote & hybrid work options for many positions, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job Description Location: Candidates in the Columbus, Ohio and Jacksonville, Florida area are preferred; remote employment is also possible for candidates in Indiana, Michigan, North Carolina, Texas, Tennessee, and Alabama. Compensation Range: $110,000 – $120,000, commensurate with experience and qualifications Are you a passionate developer who thrives in Agile environments and loves working with modern tech stacks? Join our team as a Software Engineer IV and help us build scalable, cloud-native applications that make a real impact. What You’ll Do As a key contributor, you’ll: • Work closely with the Program Manager, Business Analyst, and the Agile team to collaborate on proof of concepts, industrialization of the concepts and the delivery of the concepts in a digital framework for quick release cycle to achieve targeted Minimal Viable Product (MVP)., • Using modern technologies including web frameworks, SQL Server, Azure, iPaaS and DevOps tools, design, and develop enterprise applications. Design and develop business applications and system solutions including test plans, unit testing, safety and soundness testing, regression testing and system integration testing following enterprise architecture, design, and coding standards., • Fully support and participate in all stages of the Agile methodology including daily standup, story planning, backlog grooming, deliverables, and demonstrations. Provide honest and critical feedback during all stages of the process to ensure better development practices and successful solution implementations., • Provide recommendations to the team for environmental/architectural changes that will increase the stability or improve the performance of Corporate One’s systems and applications., • Fully document necessary aspects of the applications and processes for easy maintenance, transition, and governance needs., • Work closely within and outside of the team for ideation, vendor evaluation and research work; keeps abreast of new technologies and trends to support innovation., • Support the company’s in-house developed applications. Restore functionality to applications that have failed and documents resolutions. What We’re Looking For: • 3 years of related experience with enterprise application development and all phases of software development lifecycle., • 4 years of experience with application software solution design and implementation., • Strong practical knowledge of Agile/Scrum methodology and full participation in Agile ceremonies. Qualifications: • Bachelor’s degree in Computer Science, Engineering, or related field (or equivalent experience)., • Hands on experience with Microsoft.Net, C#, ASP.NET, React.js, SQL Server, Azure, Web Services, REST or RESTful services., • Experience with iPaaS/Enterprise Service Bus Integration Architecture, CSS, HTML, JQuery, JavaScript, is preferred. Experience with Flowgear is a plus. About Corporate One: We are a leading wholesale financial services provider to more than 700 credit unions nationwide. For over 70 years, we’ve delivered innovative investment, funding, and payment solutions to help credit unions and their communities thrive. Alongside our CUSOs – Lucro Commercial Solutions and Accolade Investment Advisory – we’re committed to empowering our members’ success. Why Join Us? • Organizational Strengths: One of the nation’s largest and most progressive corporate credit unions with more than $6.0 billion in assets and an average staff tenure of 10+ years, • Competitive Compensation & Benefits: Generous 401(k) matching, quality health and ancillary benefits, • Work-Life Balance: 4 weeks of PTO starting year one, 11 paid holidays, and paid parental leave, • Learning and Development: Access to online training, mentoring, and business coaching, • Fun Perks: Tuition reimbursement, pet insurance, and year-round events Ready to take the next step? Apply now or share with someone who’d be a great fit! Corporate One Federal Credit Union is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, disability, age, or veteran status.

Job DescriptionSyms Strategic Group (SSG) is seeking a talented Data Platform Engineer Location: Remote Department: Veterans Affairs (VA) Type: Full Time Min. Experience: Experienced Security Clearance Level: Public Trust (MBI) Salary Range: $85,389 - $116,975 If you have previously applied to Syms Strategic Group (SSG), there is no need to reapply. Applications are still under review. Military Veterans are highly encouraged to apply! Essential Duties and Responsibilities • Lead the next phase of the healthcare data platform modernization, • Implement the evolution from a Microsoft SQL eXtensible Markup Language (MSSQL XML) object store toward a scalable, cloud-native AWS data architecture that enables business stakeholders and analysts to run performant, SQL-based reports and queries against healthcare data seamlessly, • Evaluate and decide the right AWS data strategy for the platform, • Evaluate and recommend the optimal AWS-native data storage and query architecture for the XML object store data, assessing options such as S3 + Athena, Aurora, DynamoDB, Redshift, and OpenSearch based on query patterns, reporting needs, cost, and scalability, • Design and build the reporting and query layer that allows business stakeholders and non-technical users to run relational SQL queries against healthcare data using familiar tooling, • Architect the migration path for XML object store data from MSSQL into the target AWS platform, defining storage formats, partitioning strategies, and data organization for optimal query performance, • Build and maintain AWS data catalog, schemas, and metadata management so that object store data is discoverable and queryable by business users, • Optimize query performance and cost across chose AWS services – partitioning, compression, file formats, and query pattern tuning, • Work directly with business stakeholders and analysts to understand reporting requirements and translate them into durable, performant data models and query patterns, • Collaborate with back-end C#/.Net engineer to ensure data flows cleanly from Electronic Data Interchange (EDI) processing pipelines into the new data layer, • Implement and maintain CI/CD pipelines for data infrastructure using AWS-native tooling (CodePipeline, CodeBuild, and CodeDeploy), • Apply Infrastructure as Code (IaC) practices using AWS Cloud Development Kit (CDK), CloudFormation, or Terraform, • Document architecture decisions, data flows, and data dictionaries clearly for both technical and non-technical audiences Required Skills and Experience, • 8+ years’ experience in software or data engineering with a strong AWS focus, • Proven experience architecting and executing cloud data platform migrations in production enterprise or healthcare environments, • Track record of evaluating and selecting AWS data services to meet business reporting and query requirements, • Experience delivering reporting or analytics solutions that serve non-technical business users, • Deep hands-on AWS experience across data-oriented services – S3, Athena, Glue, Aurora, DynamoDB, Redshift, OpenSearch, Lambda, IAM, and Cloudwatch, • Strong SQL skills with the ability to design relational query layers over semi-structured or non-relational data (XML, JSON), • Experience working with XML-heavy data stores – parsing, querying, and transforming XML at scale, • An ability to evaluate trade-offs across AWS data services and make architecture recommendations based on cost, performance, and business requirements, • Familiarity with AWS analytics and reporting services, including Athena, QuickSight, RedShift, or equivalent Business Intelligence (BI) tooling, • Proficiency with Git and GitHub - branching strategies, pull requests, and collaborative workflows, • Familiarity with CI/CD practices and AWS-native tooling (CodePipeline, CodeBuild, and CodeDeploy), • IaC experience (AWS CDK, CloudFormation, or Terraform), • Strong ability to communicate technical architecture decisions and trade-offs to non-technical stakeholders, • Experience gathering and translating business reporting requirements into technical data models, • Comfort driving ambiguous architecture decisions to resolutions with limited direction, • Experience with Agile methodologies (Scrum, Kanban) and JIRA, • Strong documentation habits – architecture diagrams, data dictionaries, migration runbooksProfessional CertificationsNone but AWS certifications are a bonusYears of Professional Experiencen/aDesired experienceElectronic Data Interchange X.12 (EDI) Medical Claims, • X.12, Medical Claims (837, 835, 277CA, etc), Health Level (HL7), Fast Healthcare Interoperability Resources (FHIR)Familiarity with C#/.Net back-end services for integration touchpoints Experience with Entity Framework migration or deprecation projects Experience with healthcare payer/Pharmacy Benefit Management (PBM) systems, clearinghouses, or pharmacy operations Knowledge of HIPAA compliance requirements in cloud data architectureFormal EducationBachelor’s degree or higher in Computer Science, Engineering, or a related technical discipline; equivalent practical experience consideredCitizenship RequirementU.S. Citizenship required for this specific opportunitySecurity Clearance RequirementsMust possess or qualify for a Public Trust (MBI)CRITICAL NOTES: • SSG will not make assumptions regarding your qualifications. Your answers to the mandatory screening questions must be supported by the information on your resume. Applications with inconsistencies will not be considered., • Recruiters or Third parties will not be considered., • This is a 100% U.S. based remote position. However, candidates from CA, CO, IL, MN, NJ, NY, OR, or WA will not be considered., • This is a W-2 position, • All interviews will be conducted on Microsoft Teams with your camera on; there will be no exceptions, • As part of our screening process, you will be requested to provide a link to your LinkedIn profile U.S Citizenship is required for this specific opportunity. Applicants selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information and be able to obtain a government-granted security clearance. Individuals may also be subject to a background investigation including, but not limited to criminal history, employment and education verification, drug testing, and creditworthiness. Syms Strategic Group, LLC is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, marital status, disability, veteran status, sexual orientation, or genetic information. Powered by JazzHR zxOtU0RVHW

Job Description Overview Shape the Future with DLZ! At DLZ Corporation, we don’t just design infrastructure—we create solutions that improve communities and empower careers. As a nationally recognized, award-winning multidisciplinary firm, we deliver engineering and architectural design services, construction management, surveying, right-of-way acquisition, and materials testing across the Midwest. Join a team where innovation meets collaboration, and your expertise drives meaningful impact. Responsibilities DLZ currently has a rewarding Senior Mechanical Engineer - Mechanical Project Manager - HVAC and Plumbing opportunity in Jacksonville, Florida or Columbus, Ohio. Responsibilities & Duties: • Design heating-ventilation-cooling systems and plumbing systems., • Load calculations, life cycle costing and energy modeling., • Coordinate with other disciplines and work in a team environment., • Review installation of designed equipment/systems for compliance with construction documents., • Perform duties with multiple projects within the established schedules., • Work on a wide variety of project types, scales and complexity., • Work on concurrent projects., • Prepare construction cost estimates, both in a broad and detailed scope, • Assist in the development of contract specifications and research the application of new procedures and/or products., • Perform all work in a safe and responsible manner, in accordance with the Health and Safety Plan., • Possess aptitude to act as a positive representative of the company and its core values., • Perform other duties as assigned. Job Requirements: • Bachelor of Mechanical Engineering Degree, • 10 or more years’ experience in design, layout, and analysis for HVAC and plumbing systems, • Professional Engineer (PE) License required., • Strong Revit skills required, • LEED AP and/or Commissioning credentials is a plus., • Project Management experience is preferred. Program Management experience is a plus., • Experience with team leadership and financial management is a plus., • Knowledge of Mechanical and Plumbing Codes., • Experience working on publicly funded and municipal projects is strongly preferred., • Ability to visit and safely traverse construction and project sites and complying with all applicable safety codes and requirements. Qualifications Investing in Your Future: We offer a comprehensive benefits package designed to support your well-being and career growth: • Health, dental, and vision insurance, • Flexible spending accounts & health savings account, • 401(k) options (Traditional and Roth), • Paid parental leave, • Life & AD&D insurance, • Short- and long-term disability, • Wellness program with reimbursement benefits Our Commitment to Inclusion At DLZ, diversity isn’t just a policy—it’s a priority. We foster an environment where every individual is respected, valued, and empowered to contribute their unique perspective. Employment decisions are based on merit and qualifications, in full compliance with all applicable laws. #LI-DM1 #ZR

Job Description Crawford, Murphy & Tilly is seeking a Civil Engineer Project Manager to join our emerging Aviation team in Jacksonville, FL. This is not a remote position. We are a fast-growing firm with 500+ employees across 25 offices in 10 states, serving clients through our four primary business groups: • Aviation, • Surface Transportation, • Water Resources, • Building & Site Services As a Civil Engineer Project Manager, you'll play a key role in supporting the Florida Aviation team while providing the opportunity to experience new challenges in a dynamic environment. Join us and help shape the future of engineering and consulting. Here’s what you’ll do: • Planning, design, and construction of civil & transportation projects focused on Aviation development, • Perform and lead design tasks or projects, including the supervising and directing of junior staff, • Typical projects require preparation of bidding documents (plans & specifications), including horizontal and vertical layout, site development, grading, drainage, pavement design, marking, signage, erosion control, coordination with other disciplines, water & sanitary utilities, quantity takeoffs, cost estimates, and construction scheduling, • Support the client manager in providing service to and developing relationships with existing aviation clients, • Perform project management and coordination of multi-disciplined tasks necessary to implement projects for clients in our aviation group, • Perform, assist, or oversee construction-related tasks, including on-site construction observation and project engineering, • Assist in business development activities, including prospective client outreach, submittal preparation, and community engagement Here is what you’ll need: • Bachelor’s degree in civil engineering, or related field., • 8 years' experience with an emphasis in Aviation transportation., • Transportation, site development, and infrastructure design, • Geometric design, grading, drainage, pavements, utilities, and specifications, • Licensed Professional Engineer (PE). (Florida preferred)., • Proficient knowledge in AutoCAD; Civil 3D, and Microsoft Office., • Strong verbal and written communication skills, • Strong interpersonal and active listening skills, • Strong attention to detail and thoroughness in completing tasks, • Strong organizational skills and ability to manage deadlines and multiple concurrent tasks., • Strong problem-solving and critical thinking skills to identify issues, evaluate options, and implement solutions, • Demonstrated responsiveness, professionalism, and teamwork Ideally, you will also have: • Experience in business development and staff supervision, • Willingness to travel as needed, • Valid driver’s license and acceptable driving record Physical Requirements: • Physical demands vary depending on the specific nature of assigned projects., • Office tasks: physical requirements are minimal and include prolonged periods sitting or standing at a desk and working on a computer Elevating infrastructure, together. Crawford, Murphy & Tilly (CMT) is a civil infrastructure professional services firm working with clients and their communities to shape the future, together. Our mission is to provide superior infrastructure solutions, responsive to clients’ needs and expectations, while fostering growth and development for employees. Our dedicated team of engineers, planners, scientists, and consultants work together with clients and their communities to plan, advance, deliver, and manage civil infrastructure. At CMT, we are looking for individuals who come to us with varied perspectives, backgrounds and worldviews. Benefits at CMT CMT offers a generous benefits program, focused on four pillars: Health & Wellness, Work + Life Balance, Financial Heath & Retirement, and Career Development. To learn more about the CMT benefit programs, review the information on our website, Careers - CMT Infrastructure Professionals. The expected compensation range for this position is $100,000 - $150,000 annually. The final agreed-upon compensation is based on numerous factors, including but not limited to individual education, qualifications, prior work experience, and geographic location. EQUAL OPPORTUNITY EMPLOYMENT (EEO) POLICY Crawford, Murphy & Tilly (CMT) is an Equal Opportunity Employer and is committed to providing employment opportunities to minorities, females, veterans and disabled individuals, as well as other protected groups. ACCOMMODATIONS FOR APPLICANTS Applicants wishing to apply for an open position with CMT who require a reasonable accommodation in order to complete the application process may contact CMT’s Human Resources Department at kallen@cmtengr.com to request assistance. CMT is an Equal Opportunity Employer. UNSOLICITED APPLICATIONS CMT does not accept unsolicited resumes or applications. Staffing and recruiting agencies, and individuals being represented by an agency, are not authorized to use this site or to submit applications or resumes, and any such submissions will be considered unsolicited. CMT is not responsible for any fees related to unsolicited resumes/applications.

Job Description The Process Engineer is responsible for leading the design and implementation of solutions that meet the needs of our diverse food and beverage manufacturing operations. This role requires a deep understanding of food processing technologies, the design and delivery of production systems for food and beverage manufacturing facilities, with an emphasis on raw material storage, processing, thermal processing, mixing & blending, filling, and food safety compliance, as well as a commitment to sustainability and cost-effectiveness. The Process Engineer will work closely with cross-functional teams, including product development, marketing, engineering, architects, manufacturing, project management, and field staff to ensure that all process solutions are innovative, functional, and fully developed to include all requirements for successful operation. Duties/Responsibilities: • Design processes to achieve project goals, • Define processing steps required to make food or beverage products, handle waste or byproducts, and cleaning systems., • Calculate equipment rates, create optimal food plant layouts, and prepare block and/or process flow diagrams to ensure all flows are understood and included in the design., • Engineer process equipment & systems, • Perform process calculations, size and select equipment & components; ensure designs comply with relevant codes, standards, & sanitary practices., • Develop P&ID’s, equipment specifications, installation specifications, equipment lists, controls narratives for coordination, and coordinate 3D modeling with design., • Coordinate with 3rd parties for equipment engineered by others, with internal or external project team members for integration of the process into plant infrastructure., • Support procurement of equipment & installation packages, • Assist in identifying suppliers & subcontractors, perform technical writing aspects in bid packages for scope definition, compile technical engineering documents for bid packages., • Participate in bid-scope reviews, assist in analyzing proposals, lead design reviews of drawings & models, attend coordination meetings, review submittals, participate in factory acceptance testing., • Support installation of process equipment, • Review installation submittals and participate in subcontractor coordination meetings., • Travel to site for technical assistance, coordinate directly with Stellar field staff and subcontractors, identify and resolve issues that arise, review installations for correctness, and revise drawings for as-built conditions., • Startup & commissioning of process equipment, • Assist in preparing comprehensive documentation of commissioning processes, test results, and system performance., • Assist in process system testing and commissioning activities, including functional testing, performance testing, and safety testing., • Coordinate with clients and stakeholders for system handover, providing necessary documentation and training for operational staff., • Maintain current knowledge of food manufacturing trends, regulatory requirements, and food industry-specific considerations., • Other duties as assigned.Required Skills/Abilities:, • Strong leadership and team collaboration skills., • Thorough understanding of the food industry, process systems, & plant operations., • Familiarity of startup and commissioning processes and procedures for process systems., • Excellent analytical, problem-solving and troubleshooting abilities, capable of identifying and resolving issues., • Effective communication skills, both written and verbal, including interpersonal skills., • Innovative thinking and the ability to develop creative solutions., • Attention to detail and strong organizational skills., • Ability to work under pressure and meet tight deadlines., • Knowledge and understanding of industry regulations, and standards including safety as relates to food or beverage manufacturing systems., • Flexibility to work in different environments and adapt to changing project requirements.Education/Experience:, • Bachelor of Science Engineering degree in Chemical, Manufacturing, Mechanical, or a related field., • Advanced degrees or certifications in continuous improvement methodologies are advantageous., • Minimum of 1-7 years of experience in food or beverage manufacturing systems. Relevant professional certifications are a plus., • Experience in calibration, startup and commissioning of food or beverage process systems is preferred., • Knowledge of Ingredients and their reactions to heating, cooling, mixing, blending, pumping., • Knowledge of Process Controls that support recipe management and product repeatability., • Knowledge of 3A, USDA, or FDA sanitation requirements and regulatory entities., • Skilled in relevant software; Microsoft Office Software, AutoCAD, Inventor, Revit, Procore, Bluebeam, Adobe, Power BI, and ACC is preferred., • Experience with process design and engineering in a design-build or EPC setting., • Exposure to sustainability-focused initiatives such as water reuse, energy recovery, or nutrient capture is a plus.Travel Requirements:, • Ability to travel regularly for site visits, attend project meetings, corporate training, and events., • Ability to travel internationally, obtain and maintain a valid passport., • Travel expected to be at least 20%., • Flexibility to travel on short notice for urgent business needs., • Comfortable with various modes of transportation, including flights, trains, and rental cars., • Ability to navigate and work effectively in diverse geographical locations and time zones., • Ability to adapt to different cultures and customs while traveling., • Maintain a professional demeanor and appearance during business trips., • Compliance with company travel policies and procedures.Physical Requirements:, • Ability to use a computer, phone, iPad, printer, scanner, and other office equipment., • Visual acuity for detailed work and computer use., • Ability to lift, carry, and move up to 25 pounds of files, documents, and materials, • Ability to sit, stand, and walk for long periods of time, ability to climb flights of stairs and ladders., • Ability to bend, stoop, and reach as necessary., • Manual dexterity for operating office equipment, measuring devices, quality & testing devices., • Ability to work around machinery during installation, startup, commissioning, and troubleshooting., • Capability to handle occasional exposure to extreme heat, extreme cold, wet environments, and extreme odors. About Stellar Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job Description Crawford, Murphy & Tilly is seeking a Sr. Transportation Engineer to join the Jacksonville, FL Surface Transportation team. This is not a remote position. We are a fast-growing firm with 500+ employees across 25 offices in 10 states, serving clients through our four primary business groups: • Aviation, • Surface Transportation, • Water Resources, • Building & Site Services As a Sr. Transportation Engineer, you'll play a key role in supporting the Jacksonville, FL team while providing the opportunity to experience new challenges in a dynamic environment. Join us and help shape the future of engineering and consulting. Here’s what you’ll do: • Planning, design, and project management of moderate to complex transportation projects on primarily FDOT-focused projects, • Collaborate effectively with multi-disciplinary teams to ensure successful project delivery, • Provide leadership in staff development and growth in our Jacksonville, FL operations, • Drive project development and pursue surface transportation-related work, • Engage clients, agencies and other professionals within the transportation engineering industry Here is what you’ll need: • Bachelor’s degree in civil engineering, or related field, • 5 - 10 years' experience with an emphasis in roadway/highway geometric design, • Registered Professional Engineer in Florida, or the ability to gain licensure in the state, • Strong preference will be given to those with not only a technical understanding of delivering highway engineering projects but those that possess a complete understanding of delivering a quality and comprehensive product, program, or solution for our surface transportation clients, • Proficient knowledge in OpenRoads, AutoCAD, Civil3D software packages, • Strong technical, written, and oral communication skills, • Strong interpersonal and active listening skills, • Strong attention to detail and thoroughness in completing tasks, • Ability to work and lead in a team environment while mentoring staff, • Ability to manage multiple assignments on a variety of projects, work in an environment to learn quickly, take initiative and interact with a variety of people located in Florida and other CMT offices, • Strong problem-solving and critical thinking skills to identify issues, evaluate options, and implement solutions, • Demonstrated responsiveness, professionalism, and teamwork Ideally, you will also have: • Geometric design, drainage, transportation planning, traffic engineering/corridor studies, project management with FDOT is desired, • Experience in business development and staff supervision, • Willingness to travel as needed, • Valid driver’s license and acceptable driving record Physical Requirements: • Physical demands vary depending on the specific nature of assigned projects., • Office tasks: physical requirements are minimal and include prolonged periods sitting or standing at a desk and working on a computer Elevating infrastructure, together. Crawford, Murphy & Tilly (CMT) is a civil infrastructure professional services firm working with clients and their communities to shape the future, together. Our mission is to provide superior infrastructure solutions, responsive to clients’ needs and expectations, while fostering growth and development for employees. Our dedicated team of engineers, planners, scientists, and consultants work together with clients and their communities to plan, advance, deliver, and manage civil infrastructure. At CMT, we are looking for individuals who come to us with varied perspectives, backgrounds and worldviews. Benefits at CMT CMT offers a generous benefits program, focused on four pillars: Health & Wellness, Work + Life Balance, Financial Heath & Retirement, and Career Development. To learn more about the CMT benefit programs, review the information on our website, Careers - CMT Infrastructure Professionals. The expected compensation range for this position is $85,000 - $125,000 annually. The final agreed-upon compensation is based on numerous factors, including but not limited to individual education, qualifications, prior work experience, and geographic location. EQUAL OPPORTUNITY EMPLOYMENT (EEO) POLICY Crawford, Murphy & Tilly (CMT) is an Equal Opportunity Employer and is committed to providing employment opportunities to minorities, females, veterans and disabled individuals, as well as other protected groups. ACCOMMODATIONS FOR APPLICANTS Applicants wishing to apply for an open position with CMT who require a reasonable accommodation in order to complete the application process may contact CMT’s Human Resources Department at kallen@cmtengr.com to request assistance. CMT is an Equal Opportunity Employer. UNSOLICITED APPLICATIONS CMT does not accept unsolicited resumes or applications. Staffing and recruiting agencies, and individuals being represented by an agency, are not authorized to use this site or to submit applications or resumes, and any such submissions will be considered unsolicited. CMT is not responsible for any fees related to unsolicited resumes/applications.

Job Description IQ Fiber was built to do internet differently. We're a 100% fiber-optic internet provider with a simple mission: To engineer a smarter internet experience. That means internet that's fast, reliable, and simply priced, backed by real humans who answer when you call and solve problems before you know they exist. We bring that same thinking to how we build our company. Our teammates are a big part of what makes IQ Fiber different, and we believe how we work matters just as much as what we deliver. We're looking for good humans who bring great ideas, raise the bar with every task, and want to be part of a bigger story. Your work matters here. Position Summary IQ Fiber is seeking a Manager, Outside Plant Engineering to oversee the planning, design, and execution of outside plant (OSP) construction and maintenance activities. This role leads cross-functional teams and contractors to ensure high-quality fiber network deployment, operational efficiency, and compliance with regulatory and safety standards. This is a highly visible, hands-on leadership role that requires deep technical knowledge of fiber construction, splicing techniques, network architecture, and OSP documentation practices. The Manager, Outside Plant Engineering is accountable for team development, contractor oversight, system compliance, and supporting a 24/7/365 operation. Location: Based out of our Gainesville office, with approximately 40% travel to our Jacksonville market. Essential Duties and Responsibilities ◦ Lead, develop, and manage an OSP team including Supervisors, Fiber Technicians, Engineers, Locators, and Construction Technicians; responsible for hiring, mentoring, performance evaluation, and disciplinary action as needed. ◦ Train team members and build competencies in splicing techniques, troubleshooting, network architecture, documentation requirements, and end-to-end OSP processes. ◦ Oversee the planning and execution of FTTP construction projects, including field surveys of proposed and existing aerial and underground facilities, cost development for MDU, commercial, and ROE properties, and management of fiber architecture installation in multi-tenant buildings. ◦ Manage and coordinate OSP construction activities using both in-house and contract resources; oversee all outside construction contractors, including invoicing, quality of work, and documentation. ◦ Support troubleshooting of network systems and lead the restoration of all outside plant repairs; manage system performance while responding to customer inquiries as needed. ◦ Enforce methods, procedures, and practices related to IQ Fiber's OSP splicing, construction, and fiber optic documentation policies; ensure continuous compliance with OSHA safety standards and NCTA and FCC regulations. ◦ Respond to the needs of a 24/7/365 operation; remain available for after-hours and weekend work, stay in service during outages until resolved, and support emergency schedules during natural disasters and network events. ◦ Provide administrative and project management support as needed, including reporting, budgeting, and cross-functional coordination. • All other duties as assigned. Required Qualifications ◦ Bachelor's or Associate's degree in engineering or a related technical field preferred, or equivalent experience. ◦ Minimum 10 years of experience in a fiber construction environment. ◦ Advanced knowledge of network engineering, optical networks, and aerial and underground construction techniques; deep familiarity with splicing, troubleshooting, and OSP documentation practices. ◦ Experience managing outside plant contractors, including quality oversight, invoicing, and compliance with company and regulatory standards. ◦ Strong organizational and project management skills with demonstrated ability to lead cross-functional teams and manage multiple concurrent construction projects. ◦ Computer skills sufficient to process trouble tickets; proficiency with Microsoft Excel and Word. ◦ Must have and maintain a valid driver's license with a clean driving record; must pass a pre-employment background check, consumer report, and drug screening. ◦ Must have close vision, color vision, depth perception, and the ability to adjust focus with good hand-eye coordination. ◦ Ability to work a 24/7/365 operation schedule, including emergency response, after-hours and weekend work, and mandatory overtime, as well as during natural disasters and network outages. What Success Looks Like ◦ OSP engineering and field teams are led and developed effectively, with a high-performance culture built through consistent coaching, technical development, and clear accountability. ◦ Fiber network projects are planned and executed efficiently, with construction, splicing, and installations completed on time, within budget, and aligned with company quality standards. ◦ Network reliability and performance are maintained, with troubleshooting efforts supported and restoration activities led decisively to minimize service disruptions for customers. ◦ Contractor performance and project execution are actively managed, with quality, compliance, and accurate documentation upheld across all outside plant activities. ◦ Safety, regulatory, and company standards are consistently met, with OSHA, FCC, and internal operational requirements followed without exception across all field and construction activities. IQ Fiber is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment visa at this time. Powered by JazzHR a8KimABvwH

Job Description AgileEngine is an Inc. 5000 company that creates award-winning software for Fortune 500 brands and trailblazing startups across 17+ industries. We rank among the leaders in areas like application development and AI/ML, and our people-first culture has earned us multiple Best Place to Work awards. WHY JOIN US If you're looking for a place to grow, make an impact, and work with people who care, we'd love to meet you! ABOUT THE ROLE We are looking for a Full Stack Engineer to architect low-latency APIs and backend services using .NET while building user interfaces in Angular for a large-scale financial services platform supporting critical investment decision tools. You will work with microservices architecture, message-driven systems including Kafka, CI/CD pipelines via GitHub Actions, and Splunk for observability, while leveraging AI coding tools including GitHub Copilot and Claude to accelerate development. The role requires strong test automation discipline and rigorous code review practices. WHAT YOU WILL DO • Architect and build low-latency APIs and backend services using .NET to support firm-wide critical systems., • Build good-looking user interfaces using Angular., • Leverage GitHub Copilot and advanced AI models (Claude, GPT) to accelerate innovation., • Deliver high-impact analytical tools that guide investment decisions for over $11 trillion in customer assets., • Champion code quality by maintaining >80% test automation coverage and leading rigorous multi-peer code reviews., • Own the production lifecycle of your services, utilizing GitHub Actions for CI/CD and Splunk for deep system observability., • Define clear API contracts using OpenAPI/Swagger to ensure seamless integration and long-term maintainability. MUST HAVES • You must be authorized to work for ANY employer in the US (e.g., Green card holders, TN visa holders, GC EAD, H4 EAD, U4U with EAD), as we are unable to sponsor or take over employment visa sponsorship at this time;, • 2+ years of strong experience with .NET and Angular, delivering production-grade solutions., • Solid experience with SQL and NoSQL databases, including query tuning and schema design., • Hands-on experience with microservices architecture and building high-performance RESTful APIs., • Proven background with message-driven systems (e.g., Kafka, RabbitMQ, or similar)., • Skilled in writing unit and integration tests to ensure reliability and maintainability., • Experienced in Agile/Scrum environments, contributing to sprint planning and peer reviews., • Bachelor’s degree in Computer Science, Engineering, or related field, or equivalent experience., • Upper-Intermediate English proficiency (B2 or higher). NICE TO HAVES • UX/UI Design experience., • Experience with PostgreSQL., • Control-M or similar orchestration platform., • Experience with Cloud Technologies such as Pivotal Cloud Foundry., • Asset Management / Investments / FinTech experience., • Working knowledge of Continuous Integration/Continuous Deployment and DevOps principles and tools (e.g., GitHub, Bamboo, SonarQube, Veracode). PERKS AND BENEFITS • Growth without limits: build your skills through mentorship, internal TechTalks, challenging projects, and a dedicated annual learning budget, • Competitive compensation: get recognition that reflects your skills and impact, with regular performance and compensation reviews, • Flexibility: work 100% remotely with flexible hours that support focus, autonomy, and a healthy work rhythm, • Meaningful, modern projects: build impactful products using modern technologies alongside global teams and leading brands, • Collaborative culture: join a supportive environment with zero micromanagement where ideas are welcomed and contributions are recognized, • Well-being & support: access local well-being programs and people-focused support tailored to your location

Job Description Description Position Summary The Sr. Hardware Engineer Lead provides hands-on technical leadership in the design, development, and support of embedded electronic products throughout the product lifecycle. This role leads hardware development and product improvements while partnering cross-functionally to ensure products are reliable, manufacturable, compliant, and successfully supported from development through production. Essential Duties and Responsibilities -Lead the design and development of embedded electronic products from concept through production, including circuit design, component selection, prototyping, design reviews, documentation, EVT/DVT/PVT, and product release. -Lead and perform analog, digital, mixed-signal, power, sensor, wireless, and microcontroller-based hardware design, including schematic development and PCB layout reviews to ensure performance, manufacturability, and design quality. -Lead prototype bring-up, functional verification, environmental and reliability testing, EMC pre-compliance testing, hardware debugging, root cause analysis, and design validation. -Provide hands-on technical support for production and existing products, including manufacturing issues, pilot builds, engineering changes, yield improvement, product enhancements, defect reduction, and complex troubleshooting. -Partner with Procurement and Supply Chain on component availability, alternate component qualification, obsolescence, supplier technical issues, second sourcing, and cost reduction initiatives. -Serve as a senior technical escalation point for complex product and customer issues, including field failures, returned products, hardware/firmware troubleshooting, root cause analysis, and corrective actions. -Partner with Quality to support engineering documentation, design controls, CAPA investigations, configuration management, ISO 9001 requirements, and product certifications including EMC/EMI, FCC, CE, UL, HazLoc, environmental, and reliability testing. -Provide team, technical, and organizational guidance to engineering team members, including technical direction, mentoring, prioritization, design reviews, engineering best practices, cross-training, and knowledge sharing to support effective execution and accountability across the team. -Work closely with Firmware, Mechanical Engineering, Manufacturing, Supply Chain, Quality, Technical Support, and Operations to prioritize technical issues and ensure successful product development and ongoing product support. Additional Skills & Qualifications Qualifications The requirements below are representative of the knowledge, skills, and abilities required to perform the job well: -Bachelor's degree in Electrical Engineering or Computer Engineering (required). -Master's degree in Electrical Engineering or a related field (preferred). -3–7 years of experience in hardware design and development of embedded electronic products. -Proven experience taking products from concept through production and sustaining engineering. -Experience supporting manufacturing, production, supply chain, and field technical support. -Experience working in cross-functional product development teams. Technical Skills -Strong knowledge of analog, digital, and mixed-signal circuit design. -Experience with microcontroller-based embedded systems and common communication interfaces (SPI, I²C, UART, CAN, USB, Ethernet). -Experience designing power supplies, sensor interfaces, and battery-powered products. -Proficiency with schematic capture, PCB design, and PCB layout review using tools such as PADS, Altium Designer, or OrCAD. -Familiarity with signal integrity, EMC/EMI mitigation, Design for Manufacturability (DFM), and Design for Testability (DFT). -Experience using laboratory equipment, including oscilloscopes, logic analyzers, spectrum analyzers, digital multimeters, and power supplies. -Ability to troubleshoot complex hardware issues and perform root cause analysis. -Experience with product validation, environmental testing, and regulatory compliance (FCC, CE, UL, EMC, HazLoc preferred). -Working knowledge of Engineering Change Notice (ECN) processes, configuration management, and engineering documentation. -Familiarity with embedded firmware development and debugging is preferred. -Software/middleware expertise – knowledge of python, c, c++, linux systems. Job Type & Location This is a Permanent position based out of Jacksonville, FL. Pay and Benefits The pay range for this position is $140000.00 - $165000.00/yr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Salary and Benefits•Compensation commensurate with experience•Medical, Dental, Vision, Life and Disability insurance•Retirement plan with company match•Paid time off (PTO) Workplace Type This is a fully onsite position in Jacksonville,FL. Application Deadline This position is anticipated to close on Sep 30, 2026. About TEKsystems We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Hermeus is a venture-backed defense aviation company reclaiming the lost art of rapid iterative prototyping to build the fastest aircraft in the world today. By prioritizing relentless hardware iteration, we deliver high-speed systems at the pace of the modern battlefield. We work with the Department of War to provide the high-speed capabilities our nation and its allies need to maintain a durable, asymmetric advantage. About The Role: We are seeking a 1st principles driven, experienced, and owner mindset Chief Engineer to lead the design, construction, and activation of an expansion at our next-generation airbreathing propulsion test facility, HEAT, located in Jacksonville, FL. This facility expansion will play a critical role in advancing hypersonic and other advanced propulsion technologies vital to Hermeus’ roadmap, national security, and aerospace innovation. As the Chief Engineer, you will serve as the technical authority and strategic lead responsible for the end-to-end development of the test facility—from concept and requirements definition through commissioning and operational readiness. This role will require close collaboration with internal teams, external contractors, and DoD stakeholders to ensure that the facility meets current and future propulsion testing needs. Responsibilities • Lead Facility Design and Architecture, • Oversee the conceptual and detailed design of the test facility, including the air plant, test cells, airflow systems, instrumentation, data acquisition, safety systems, and support infrastructure., • Guide requirements definition and translate test objectives into engineering specifications for propulsion systems., • Program and Technical Leadership, • Serve as the principal engineering authority, ensuring technical rigor, mission alignment, and engineering excellence throughout all phases of the project., • Manage and direct cross-functional engineering teams (civil, mechanical, electrical, aerospace, systems) and coordinate with external contractors and company stakeholders., • Support development of acquisition strategies, source selection, and contractor oversight., • Stakeholder Engagement and Oversight, • Liaise with government customers, test customers, and internal leadership to communicate progress, mitigate risks, and ensure alignment on priorities and capabilities., • Provide authoritative input into decision-making, budgeting, milestone reviews, and operational transition planning., • Risk and Quality Management, • Identify and mitigate technical risks related to performance, safety, schedule, and integration with test assets or vehicle systems., • Implement quality assurance processes across engineering and construction phases., • Innovation and Futureproofing, • Anticipate future propulsion test and design for scalability and modular upgrades., • Evaluate emerging technologies that could enhance facility capabilities or streamline operations. Requirements Bachelor’s degree in mechanical engineering, aerospace Engineering, or a related field (master’s or PhD preferred). 10+ years of experience in the design, development, or operation of propulsion test facilities, aerospace infrastructure, or similar test facility/infrastructure. Preferred Skills and Experience Demonstrated experience leading large-scale engineering projects involving complex systems integration and build. Deep understanding of airbreathing propulsion systems (e.g., turbojet, ramjet, scramjet, TBCC) and associated testing environments. Strong owner mindset with ability to independently execute and drive to outcomes. Familiarity with relevant safety standards, environmental standards, construction requirements, and DoD or NASA aerospace test procedures. Strong leadership, communication, and stakeholder management skills. Must be able to obtain and maintain a US Security Clearance (TS preferred). The salary range listed for this role is intended as a general guideline. Final compensation will be determined based on a variety of factors, including role scope and responsibilities, relevant experience, education and training, key skills, market data, and business needs. At Hermeus, compensation is only one part of our total rewards package. We offer competitive pay, equity, and a range of benefits designed to support our team. Benefits: • Health & Wellness: 100% employer-paid healthcare and pet insurance, • Financial: Competitive pay, stock options, 401(k) retirement plan, and potential year-end bonuses, • Time Off: Paid parental leave, 12 federal holidays, unlimited PTO for exempt employees, and generous accrued PTO for non-exempt employees, • Office Perks: Weekly paid office lunches and fully stocked breakrooms U.S. EXPORT CONTROL COMPLIANCE STATUS The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a “U.S. person” as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing. US persons include U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending. EQUAL OPPORTUNITY Hermeus is an Equal Opportunity Employer. Employment decisions at Hermeus are based solely on merit, competence, and qualifications, without regard to race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status. #LI-JC3 We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description JOB DESCRIPTION Department: Process Job Title: Process/Technical Engineer-Technical Contract Review (Bilingual Chinese and English) JOB PURPOSE The purpose of this position is to Lead technical reviews of customer contracts and technical agreements, including Bills of Materials (BOMs), manufacturing process requirements, and customer-specific technical specifications, ensure contract reviews are completed accurately and on time to minimize execution risks, quality issues, and compliance concerns, and provide on-site technical support to manufacturing and resolve engineering or process-related issues during contract implementation. JOB DUTIES & RESPONSIBILITIES • Lead technical reviews of customer contracts and technical agreements for regional sales orders, including Bills of Materials (BOMs), manufacturing process requirements, customer-specific technical specifications, and special contractual requirements., • Ensure contract reviews are completed accurately and on time to minimize execution risks, quality issues, and manufacturing nonconformities., • Provide technical support to production during contract implementation and resolve engineering and process-related issues to ensure successful execution. Contract Review Process & Documentation, • Participate in the development, validation, implementation, and promotion of cost reduction initiatives, including alternative material qualification, process optimization, and product design simplification., • Drive the implementation and utilization of approved cost-saving materials within the assigned region to support the company's overall cost reduction strategy and business objectives., • Collaborate with Sales, R&D, Purchasing, Production, Quality, and other cross-functional teams to coordinate contract review activities and cost reduction initiatives., • Identify and proactively mitigate key quality risks throughout the photovoltaic module product lifecycle, with a focus on materials, manufacturing processes, and product reliability., • Perform other engineering duties and responsibilities as assigned. REQUIREMENTS & QUALIFICATIONS • Bachelor’s Degree in Mechanical/Materials Engineering or related discipline required (Master’s degree preferred)., • Bilingual in Mandarin Chinese and English preferred., • 1-3 years of working experience in high-tech manufacturing industry or highly automated manufacturing environment., • Experience with engineering change management (ECN), BOM management, and manufacturing documentation is preferred., • Ability to interpret engineering drawings, technical specifications, customer requirements, and manufacturing documentation., • Familiarity with photovoltaic module manufacturing processes, materials, and engineering change processes., • Computer skills including Microsoft Office and CAD software (Solidworks or Inventor), experience using SAP, PLM and MES., • Strong analytical and problem-solving skills, with the ability to evaluate manufacturing feasibility, identify technical risks, and support engineering decisions., • Strong cross-functional communication and project coordination skills., • Willingness to support cross-functional engineering activities, including contract review, production support, cost reduction initiatives, process improvement, and other engineering projects., • Detail-oriented with strong problem-solving and decision-making skills., • Ability to manage multiple priorities in a fast-paced manufacturing environment., • Ability to stand and walk the production area throughout the workday. Able to lift to 50 pounds without restriction. PLACE OF JOB IN THE ORGANIZATIONAL STRUCTURE Reports to Process Superintendent

Job Description The Senior Mechanical Engineer will be responsible for the design of mechanical systems as part of a team that designs buildings and support systems for food processing plants and warehouses. The candidate will be responsible for the design and specification of utilities, HVAC, and plumbing systems. Any fire protection design experience will be a plus. You will work on projects from concept to issuing of construction drawings through construction administration efforts such as the review of equipment submittals and technical support. This position involves advanced technical knowledge, project management skills, and leadership abilities to guide junior engineers and designers collaborating with cross-functional teams. Duties/Responsibilities: • Design Utilities systems that supply fluids and gases to the building and process users via pressure piping systems. Systems commonly designed include steam generation and distribution, hot water heating and distribution, compressed air, chilled water, chilled glycol, cooling tower water, cold water distribution, water pressure booster packages, low/high pressure water pumping, natural gas, and nitrogen., • Size Utilities equipment and piping distribution systems by totalizing the loads from data available from owner/process provided equipment needs, hot/cold water requirements for restroom fixtures, analysis of metering data, HVAC and refrigeration equipment needs, and using engineering judgement for diversity or appropriate safety factors., • Produce Utilities pipe material and insulation schedules and work with vendors as required to select equipment and produce equipment schedules for the drawings., • Utilities design is to include controls sequence of operations write ups and/or controls expectations on the utilities equipment schedules., • Design Plumbing gravity drainage systems such as sanitary, storm, and process waste. This will include venting, isometric riser diagrams, pipe and fixture schedules., • Design HVAC systems that commonly use rooftop equipment, split systems, 100% outside make up air, exhaust systems, and heat pumps. The use of DX refrigerants, chilled/glycol, natural gas, and steam are commonly used for the units., • Size the HVAC equipment by totalizing the loads from data available from the owner/process provided equipment needs, and calculating the cooling and heating loads using internal load spreadsheets and load estimating software such as Trane Trace or IESVE. Size any associated ductwork by doing velocity and pressure drop calculations., • Produce HVAC ductwork material and insulation schedules and work with vendors as required to select equipment and produce equipment schedules for the drawings., • HVAC design is to include controls sequencing of operations, pressurization and hygienic zoning., • Produce drawings using Revit 3D modeling software (occasionally AutoCAD) or oversee Designers/Engineers assigned to the project team to produce the drawings., • Collaborate with cross-functional teams, including architects, civil engineers, electrical engineers, structural engineers, process engineers, design project managers, construction Project managers, owners, etc., • Conduct building assessments and feasibility studies to evaluate design options for clients. This may include equipment pricing from vendors, but installation pricing would be performed by others at Stellar., • Adhere to project timelines and budgets., • The candidate will be responsible for conceptual development, detailed design, calculations, construction level documents, oversight of Revit production resources, responding to RFIs, shop drawing and submittal review, site inspection visits, and record drawings. The role at times may require independent work or the need to manage team members assigned to their projects, while ensuring project requirements, schedule, and overall document quality are met. Inter-discipline coordination, BIM clash detection, and site inspections will be required. The candidate must be a team player and committed to the quality of work generated., • Fire Protection design experience will be considered a plus. Skills of interest include the ability to analyze flow tests, hydraulically size sprinkler piping such as site service feeds, loops, mains, and sprinkler distribution using software (Stellar uses Hydracalc) and then provide sizing/selections of sprinklers, fire pump boosters, and tanks., • Other duties as assignedRequired Skills/Abilities:, • In depth knowledge of mechanical engineering principles, applicable codes and standards such as ASME, ASHRAE, International Mechanical Code, International Plumbing Code, International Fuel and Gas Code, International Energy Code, etc., • Excellent verbal and written communication skills to convey complex technical information clearly and concisely., • Strong interpersonal skills to work effectively with team members, clients, and stakeholders., • Ability to work independently and as part of a team., • Ability to prioritize tasks, manage time efficiently, and meet milestones., • Ability to analyze and interpret technical data and drawings., • Excellent problem-solving and critical-thinking skills., • Proficiency in using mechanical engineering software and tools and Microsoft products such as Excel, Word, Teams, and Outlook., • Attention to detail and a commitment to producing high-quality work., • Strong leadership and mentorship capabilities, with the ability to inspire and guide junior engineers and designers., • Highly organized, with the ability to manage multiple projects and priorities simultaneously.Education/Experience:, • Bachelor's degree in Mechanical Engineering is required: Current P.E. license is preferred., • Minimum of 10 years of experience in mechanical engineering design is required: industrial facilities or food and beverage experience is preferred., • Basic capabilities in AutoCAD and Revit such as pan/zoom are required; modeling proficiency is preferred.Travel Requirements:, • Flexibility to travel on short notice for urgent business needs, to attend meetings, trainings, and events., • Maintain a professional demeanor and appearance during business trips., • Compliance with company travel policies and procedures. Physical Requirements:, • Ability to sit, stand, and walk for long periods of time., • Ability to use a computer, phone, printer, scanner, and other office equipment., • Visual acuity for detailed work and computer use, • Ability to lift, carry, and move up to 25 pounds of files, documents, and materials., • Ability to climb stairs and/or ladders.About Stellar Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job Description Watch your work come to life in landmark projects around the world when you partner with Syska Hennessy Group! As a global leader in consulting, engineering, and commissioning services, we specialize in MEP, information and communication technology, architectural lighting, vertical transportation, and commissioning. We currently have an entry level opportunity for an Electrical Engineering Graduate. Our dynamic work environment provides the optimal setting to take your engineering career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedule Monday to Thursday in the office for 9 hours and Friday for 4 hours remotely at home and fun social events, it is everything you will need for an exciting, challenging, and rewarding career. Job Responsibilities: As an entry level engineer, you will support our engineering teams working toward our designs that are inspiring, demanding, and highly collaborative. You will learn from others, and they will expect to learn from you. You will share in the responsibility, rewards, and recognition of producing truly innovative solutions and complete client satisfaction. Some responsibilities include: • Create basic designs under the direction of the senior engineer and/or senior designer., • Learn drawing organization and company standards., • Perform CAD/BIM drafting for a variety of projects and project sizes to begin to understand architectural engineering design and documentation., • Coordination with the designs of other trades (architectural, engineering / internal, and external) under the guidance of more senior technical staff, • Support the design and engineering efforts of systems for new installations, system retrofits, system replacement, and system upgrades for a wide variety of projects and project types., • Take ownership of the completeness, accuracy, and timeliness of the work assignments., • Assist engineers with field investigations and construction site visits to observe and attend project coordination meetings., • Participate and regularly attend the EDT program training sessions and support activities that are part of the EDT program, • Attending our Engineering Development Program continuing education seminars on technical and professional enhancing topics. Job Requirements: The ideal candidate will enjoy a team environment and be flexible enough to work independently where needed. Candidates for this role will be eager to learn and will expand their knowledge and hands-on experience by challenging themselves and using the highly technical resources around them. Additional job requirements: • Bachelor's Degree from an accredited university in Electrical engineering, or Architectural Engineering with a graduation date of Winter 2026, Spring or Summer of 2027, • Previous engineering internship, a plus, • Knowledge of the latest version of MEP Auto CAD; REVIT experience is a plus., • Proficient in design and calculation software; MS Office Suite, • FE or EIT Preferred. Benefits: As an employee at Syska Hennessy, you will be part of a global firm with an amazing history! We are committed to being the best, to advancing engineering design practice, and to supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and the total job satisfaction of the great people who work here. Our Company is committed to developing engineers into respected technical experts and versatile business leaders through our Engineer Development Program (EDT). About the EDT Program Recent graduates interested in our Engineering Development Training (EDT) program can expect to participate in an accelerated, but thorough training curriculum. This curriculum will teach not only the technical aspects of our profession, but industry specific business aspects as well. Our senior engineers will work closely with each participant to foster a strong mentor/apprentice relationship. This time-honored program is a trademark of Syska's commitment to the development and education of young engineers through mentoring and technical training. As a member of our highly collaborative team, we provide our full-time employees with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy Group includes: • Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans, • 401(k) plan with a generous employer matching program, • Training and professional development courses, • Professional development incentive bonuses, • Dynamic Employee Resource Groups, • Competitive Paid Time Off (PTO) policy, • Transit/parking employer stipend, • ½ day work from home Fridays all year long At Syska, we have cultivated a community that supports learning and provides guidance for professional development and furthering our culture of excellence. We promote an environment that is committed to embedding diversity and equality into the core of our business and culture. We empower our employees so they can take ownership of their work and development and strive to continually improve themselves and our firm. We rely on the talent, drive, enthusiasm and the total job satisfaction of the great people who work here for our success! Syska is a place where you can build an exceptional career and have a lasting impact on the world. Syska Hennessy Group Integrating the best minds and technology to help clients create exceptional environments. The salary range listed below is for this particular job posting. Actual pay range for candidates will be commensurate with candidate's experience, skillsets and competencies and may differ based on the cost of labor in their particular location. Syska wide Pay Range $57,927—$86,890 USD

Job Description Position Title: Imaging Service Engineer II - Jacksonville, FL. Join Intelas, a Compass Healthcare company. Intelas, a Compass Healthcare company, delivers smarter asset management by blending expert service teams with intelligent, data-driven strategies that help hospitals improve uptime, simplify oversight, and make more informed capital decisions. Our programs support 100% regulatory compliance and drives 98% equipment uptime—so clinicians can focus on care, not equipment issues. We support nearly 4,500 healthcare sites nationwide—from large, campus-based acute care hospitals to system-integrated outpatient clinics. With more than 1.15 million medical devices managed, we provide the clarity and consistency needed in today’s rapidly evolving healthcare environment. Join Intelas—where your career thrives, your potential is unleashed, and your work directly supports patient care. Whether you're just starting out or are a seasoned professional, our people-first approach ensures opportunities for continuous growth, development, and fulfillment. Explore more at intelashealth.com. Job Summary Key Responsibilities: • Perform planned preventive maintenance, calibrations where certification may be required and electrical safety inspections on imaging and related equipment in compliance with established standards, • Perform major repairs by replacing defective components, readjust components to manufacturer’s specifications using appropriate tools and measuring instruments. May require certification in order to complete repairs, • Assist with diagnostic imaging cross training of BMET Technicians, • Confers with manufacturer’s representatives and equipment operators to resolve equipment related problems, • Provide emergency on-call responsibilities, • Research and initiate orders for repair parts, working within established budget parameters, • Conducts and compiles Quality Assurance records and reports necessary for compliance with specifications and policies, • Document all significant asset related actions in compliance with department practices, • Must be capable of performing all the duties and responsibilities of a BMET III Preferred Qualifications: • Associates degree in Electronics/Imaging Technology, Biomedical Equipment Technology, or military training, • Prior experience of at least five years experience with various imaging equipment manufacturers or other appropriate related experience, • Minimum of five years experience in the repair of radiology equipment and prior biomedical experience, • Should possess specialized knowledge in several specialized modalities such as radiology, MRI, nuclear medicine, ultrasound, CT, cath. lab., linear accelerators, etc., • Prefer certification (CRES) in these different modalities, • Good communication and strong customer service skills, • Ability and willingness to serve "on-call" duty as required, • Must be willing to serve as a technical resource to others in areas of specialty or certification(s) Apply to Intelas today! Intelas is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Intelas are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave, • Personal Leave Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. Intelas maintains a drug-free workplace.

Job Description BB&E is an employee-owned, full-service civil and environmental engineering and consulting firm, headquartered in Northville, Michigan, which services both the Federal and Industrial sectors throughout the United States. BB&E team members provide Environmental Consulting, Facilities Engineering, and Program/Project Management Services to the Federal and private sectors. Position Summary BB&E is seeking a Civil Engineer to provide design and technical support for NAVFAC Southeast in Jacksonville, Florida. This role supports mission-critical military infrastructure projects and involves close collaboration with engineers, architects, and construction professionals. The work encompasses design and oversight of new construction, repairs, renovations, and demolition projects across Navy and Marine Corps installations. Job Duties & Responsibilities • Develop civil design drawings, specifications, and calculations for site development, utilities, grading, drainage, and airfield or waterfront facilities., • Provide technical consultation and design review for new construction, repairs, and renovations of Navy and Marine Corps facilities., • Conduct field investigations, prepare engineering analyses, and evaluate design solutions to ensure compliance with DoD and NAVFAC standards., • Coordinate with structural, mechanical, electrical, and architectural disciplines to ensure integrated design solutions., • Review design submittals, cost estimates, and contract documents for technical accuracy and constructability., • Support project planning, budgeting, and scheduling to ensure designs meet scope, safety, and performance requirements., • Participate in design and coordination meetings and provide input on site and utility design. Requirements • U.S. Citizenship and the ability to obtain/maintain a NACI/CAC is required, • Demonstrated ability to prepare and review AutoCAD plans, engineering calculations, and technical specifications., • Knowledge of NAVFAC and DoD design criteria, UFC standards, and civil engineering codes and practices., • Proficiency in civil site design software and hydraulic analysis tools., • Strong communication and collaboration skills across multidisciplinary teams., • Familiarity with Federal project delivery methods and NAVFAC design-build standards. Experience & Education, • Bachelor's degree in civil engineering from an ABET-accredited program (required); master’s degree preferred., • Minimum of 5 years of professional civil design experience, including at least 1 year supporting Federal or DoD projects., • Experience developing plans and specifications for site development, utilities, drainage, or airfield/waterfront infrastructure., • Pavement experience is highly preferred. Physical Requirements, • Ability to stand/walk/climb/kneel/crouch and remain in a stationary position/sit at least 60% of the time., • Ability to operate office equipment, including computer, copy machine, phone, etc., • Ability to use hands to finger, handle, or feel objects or controls; reach with hands and arms., • Capable of lifting up to 10 lbs., • Ability to see details of objects that are less than a few feet away., • Ability to understand the speech of another person, speak clearly so listeners can understand, and talk or hear both in person and by telephone. LIMITATIONS AND DISCLAIMER: The above job description is meant to describe the general nature and level of work being performed; it is not intended as an exhaustive list of all duties, responsibilities and required skills for the position. Employees will be required to follow any other job-related instructions and to perform other duties requested by their supervisor in compliance with Federal and State Laws. Required are representative of minimum levels of knowledge, skills and/or abilities necessary to perform each duty proficiently. Continued employment remains on an "at-will" basis. Benefits • Participation in the Employee Stock Ownership Plan – BB&E is 100% employee-owned!, • Discretionary bonus, • *Medical, Dental, and Vision Insurance with health care concierge, • *Employer provided Short-Term & Long-Term disability, • *Employer-provided Life insurance, • *Employee options for supplemental life, supplemental accident, critical illness, hospital indemnity, and Identity theft protection benefits, • *Generous PTO plus 11 paid holidays, • Traditional & Roth 401(k) options with fully vested employer match, • Tuition reimbursement & professional development, • Employee referral program, • Employee discounts, • Employee Assistance Program (EAP), • Pet insurance discount *Applies only to full-time employees *BB&E is an Equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws.

Job Description BB&E is an employee-owned, full-service civil and environmental engineering and consulting firm, headquartered in Northville, Michigan, which services both the Federal and Industrial sectors throughout the United States. BB&E team members provide Environmental Consulting, Facilities Engineering, and Program/Project Management Services to the Federal and private sectors. Position Summary BB&E is currently looking for a Construction Surveillance Engineer to support the NAVFAC Southeast (SE) Headquarters, Public Works Departments (PWD), and Resident Officer in Charge of Construction (ROICC) in Jacksonville, FL. Job Duties & Responsibilities • Provide management support to the FEAD/ROICC for construction services such as construction inspection, quality assurance, monitoring ESS compliance and contract administration; construction work includes repair, demolition, and new construction that the office executes for various commands and tenants on the installation; work will encompass all trades that are typical for repair, demolition, and new construction projects; specific workload will be identified upon arrival., • Coordinate requests from the construction Contractor for outage requests, excavation permits, burn permits, haul routes, and other similar items., • Attend meetings and conferences, take notes, and provide information to the FEAD/ROICC or the FEAD/ROICC’s representative at meetings, conferences, and briefings; includes: Preconstruction Conference, Safety Meetings, Contractor Quality Control (CQC) Meetings, Partnering Meetings., • Provide construction briefings and reports., • Provide review of submittals designated for Government approval., • Provide construction schedule review/analysis and notes/comments/recommendations on Progress Schedules and Network Diagrams, Contractor’s Safety Plan, and CQC Plan., • Monitor construction work for project CQC compliance with the contract and the Contractor's submitted plans., • Prepare Construction Representative’s Reports (CRRs) and Contract Construction Compliance Notices (CCCNs)., • Report instances of non-compliance with safety requirements., • Monitor compliance with environmental protection requirements; monitor measurements and assurance surveying; monitor materials testing., • Witness testing of waste, gas, water, electrical, heating, ventilation, air conditioning, fire protection, elevator, boiler, and energy monitoring control systems., • Review daily CQC and Contractor Production Reports (CPRs); monitor the updating of Submittal Status Logs; and review other required documentation., • Work with the CSET and FEAD/ROICC personnel to complete, together with the construction Contractor’s representative, the field pay estimate worksheet for the construction contract., • Notify FEAD/ROICC Leadership of disagreements, discrepancies, or major problems., • Assist in conducting pre-final inspections., • Provide advice for modification negotiations., • Maintain working files; use NAVFAC’s Electronic Construction and Facility Support Contract Management System (eCMS) to manage electronic submittals and documents., • Prepare an independent construction cost estimate for modifications to construction contracts; prepare, for each modification cost estimate, a narrative assessment of the impact of the proposed change on the construction Contractor’s operations., • Provide construction photographic and record drawing services., • Perform constructability review services; perform spot checks for completeness and accuracy of the construction plans and specifications, and determine the constructability of the facility at the beginning and during the duration of each Phase of Construction., • Manage Requests for Information (RFIs). Requirements • Construction technical competencies and qualifications to verify that a specific level of workmanship was obtained., • Knowledge of construction scheduling methods and familiarity with the use of scheduling software, including but not limited to Primavera Suretrak/P3/P6 and Microsoft Project., • Proficiency in using computer software programs such as Microsoft Word, Excel, PowerPoint, and Outlook; Adobe Acrobat Professional; and RS Means/CostWorks., • Ability to communicate effectively, concisely, and authoritatively in English both orally and in writing. Experience in preparing correspondence, writing reports, and briefing management personnel., • Experience in developing and maintaining complex, long-term, multi-year program construction management activities, including submittal and Request for Information (RFI) processing., • Experience and familiarity with Federal building design criteria and construction guide specifications., • Knowledge of construction practices and techniques, e.g., proper applications of construction materials and methods of installation., • Ability to accurately calculate construction costs for changes, pricing the value of needed work, and providing recommendations for equitable adjustments., • Ability to monitor the preparation of as-built activities of contractors to ensure that those documents are being prepared on an ongoing basis; ability to review contractor submissions of as-built drawings for completeness and accuracy, and advise in writing the appropriate Government personnel as to the acceptability of such submissions., • Ability to identify critical and long lead-time materials and recommend procurement strategies to prevent negative impact on quality, cost, and schedule., • Completed 30-hour OSHA Construction Training within the past 2 years OR obtain it within 60 days of onboarding., • Must hold a certificate in USACE Construction Quality Management (CQM) for Contractors Training (maintain a valid 5-year certificate) or obtain certification within 60 days of onboarding., • U.S. Citizen., • A valid driver’s license.Experience & Education, • A minimum of 7 years of experience as a Construction Manager, Field Engineer, Project Engineer, or Quality Control Manager on commercial/industrial type facilities, utility, or waterfront-related contracts valued over $5M., • Bachelor’s Degree in one of the following areas: a degree in engineering from an ABET-accredited university; a degree in construction management from an ABET or ACCE-accredited university; or a degree in architecture from a NAAB-accredited university., • Substitute the degree requirement with an additional 5 years of experience beyond the requirement of a minimum of 7 years of experience as a Construction Manager, Field Engineer, Project Engineer, or Quality Control Manager on commercial/industrial type facilities, utility, or waterfront-related contracts valued over $5M.Physical Requirements and Work Environment The physical demands and work environment may vary based on the position, assigned duties, and work location. Employees must be able to perform the essential functions of the position, with or without reasonable accommodation. • Remain in a stationary position for extended periods, • Use computers, telephones, and other office equipment, • Move throughout offices, facilities, and project sites, • Reach, grasp, handle equipment, and operate controls, • Communicate effectively and review documents, equipment, and site conditions, • Lift and carry materials or equipment weighing up to 50 pounds when required by the assignment, • Stand or walk for extended periods and occasionally climb, kneel, or crouch, • Navigate uneven or rough terrain when required, • Work indoors and outdoors in varying weather conditions, • Occasionally enter confined spaces or work at heights when required, • Wear required personal protective equipment, • Work in environments that may include noise, dust, fumes, chemicals, electrical hazards, construction activity, or other site specific conditions Limitations and Disclaimer This job description describes the general nature and level of work associated with the position. It is not intended to be an exhaustive list of all duties, responsibilities, qualifications, or working conditions. Employees may be assigned other job related duties consistent with applicable law. The duties and requirements described above are representative of those that may be necessary to perform the essential functions of the position, with or without reasonable accommodation. Benefits • Competitive compensation packages, • Participation in the Employee Stock Ownership Plan – BB&E is 100% employee-owned!, • Discretionary bonus, • *Medical, Dental, and Vision Insurance with health care concierge, • *Employer provided Short-Term & Long-Term disability, • *Employer-provided Life insurance, • *Employee options for supplemental life, supplemental accident, critical illness, hospital indemnity, and Identity theft protection benefits, • *Generous PTO plus 11 paid holidays, • Traditional & Roth 401(k) options with fully vested employer match, • Tuition reimbursement & professional development, • Employee referral program, • Employee discounts, • Employee Assistance Program (EAP), • Employee Homeownership Benefits, • Pet insurance discount *Applies only to full-time employees BB&E is an Equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws.

Job DescriptionJOB DESCRIPTION Watershed Security, is a Veteran Owned Small Business with over 20 years’ Cybersecurity and Government Contracting experience. Watershed is looking for an Information System Security Engineer (ISSE) for a six-month task in Jacksonville, FL, to coordinate the Assessment & Authorization (A&A) lifecycle for a PSS alarm monitoring system. The primary objective of this role is to drive the Risk Management Framework (RMF) re-authorization effort utilizing NIST SP 800-53 Rev 5 controls to secure an Authority to Operate (ATO). The ISSE will serve as the primary cybersecurity advisor to the systems team, analyzing the current environment (Windows, Citrix, DVR/Cameras) for compliance, addressing End-of-Life (EOL) software risks, and engineering security mitigations; onsite in Jacksonville, FL. REQUIRED QUALIFICATIONS Key Responsibilities • RMF Re-Authorization Leadership: Lead the development, analysis, and submission of the Authority to Operate (ATO) package via Navy eMASS in accordance with the Risk Management Framework (RMF)., • NIST SP 800-53 Rev 5 Alignment: Select, tailor, and validate system security controls specifically mapping to the updated NIST SP 800-53 Rev 5 framework., • Vulnerability & EOL Assessment: Utilize Assured Compliance Assessment Solution (ACAS) and DISA STIG Viewer to scan and evaluate the security posture of Windows domain controllers, Citrix servers, and camera systems., • Risk Mitigation Planning: Perform cyber-engineering analysis on End-of-Life (EOL) software components, recommending compensating controls or remediation pathways to the technical lead., • Configuration & Change Advisory: Advise the systems engineering team on how proposed software updates and configuration changes will affect system accreditation and compliance., • Artifact Generation: Develop and maintain critical cybersecurity artifacts, including the System Security Plan (SSP), Risk Assessment Report (RAR), and Plan of Action and Milestones (POA&M).Qualifications, • Experience: 7+ years of practical experience in Cybersecurity Engineering, Assessment & Authorization (A&A), and RMF package development., • Framework Mastery: Direct, expert working knowledge of the RMF process and specific experience implementing NIST SP 800-53 Rev 5 control sets., • Tooling Experience: Proficiency with cybersecurity assessment tools, specifically DISA eMASS and ACAS (Tenable Nessus)., • Technical Environment Knowledge: Understanding of cybersecurity risks associated with Windows Active Directory, Citrix virtualization environments, and IoT/OT physical security equipment (cameras/DVRs)., • Clearance: Must be a U.S. Citizen possessing an active DoD Secret security clearance., • Education: Bachelor’s degree in technical discipline or equivalent practical experience. PAY RANGE Final salary is influenced by factors such as location, contract labor categories, experience, sk ills, education, and certifications. Watershed offers competitive compensation, medical and dental benefits, educational reimbursement, 401K plans with matching, 15 days of PTO to start and 11 paid holidays per year. The proposed salary range for this position is: $95,000.00 - $114,000.00 USD. Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Powered by JazzHR QOKPd36gjX

Job Description Job Title: Director of Transportation | GALocation: Savannah, GA Position SummaryThe Director of Transportation is responsible for leading and growing the firm's transportation practice in the Savannah region. This role combines strategic leadership, project oversight, client relationship management, and business development to drive high-quality transportation solutions and expand market presence. The ideal candidate brings deep technical expertise, strong leadership capabilities, and a proven track record in managing complex infrastructure projects.Key Abilities CAD/Revit modelingProduction of plan sheets, detail and exhibits.Strong understanding of design concepts and completion of engineering calculations.Understand analysis models and software capabilities.Technical Writing.Strong task management including prioritizing tasks and completing tasks within the indicated timeframe.Attend and participate in client meetings.Teach design concepts to less experienced team members.Delegate project tasks to less experienced team members and check their work.Complete projects from start to finish, including the design of the project, production of construction drawings, and coordination with other disciplines.Key ResponsibilitiesOverseeing the development and improvement of technical processes and standards. Overall project management success on all design projects includes QAQC and teaming management to ensure delivery and quality on time.Staff development and progression including employee reviews and mentorship.Timesheet review and approval.Track and manage employee workload and review employee utilization. Accurate reporting on projections.Review monthly department billings to ensure accuracy.Develop and review project proposals. Manage design projects by leading a design team. QualificationsEducation & ExperienceBachelor's degree in Civil Engineering (Master's preferred) Licensed Professional Engineer (PE) required (Georgia or ability to obtain) Typically, 12+ years of experience in transportation engineering 5+ years in a leadership or management role Skills & CompetenciesStrong knowledge of transportation design standards and regulatory requirements (e.g., DOT, FHWA) Proven ability to manage large-scale infrastructure projects Demonstrated success in business development and client relationship management Excellent leadership, communication, and team-building skills Preferred QualificationsExperience working with Georgia Department of Transportation (GDOT) Established network in the Southeast transportation market Experience leading multi-disciplinary teamsWhy join our team?Unlimited growth potentialStrong industry leaderFlexible work scheduleYou will make an impactWe have cool work already lined up

Job Description The Packaging Engineer is responsible for the development and implementation of advanced packaging solutions that meet the needs of our client’s diverse product lines. This role requires a deep understanding of packaging materials, processes, equipment, and technologies, as well as a commitment to sustainability and cost-effectiveness. The Packaging Engineer will work closely with cross-functional teams, including product development, marketing, and manufacturing, to ensure that all packaging solutions are innovative, functional, and aligned with the company's strategic goals. Duties/Responsibilities: • Create complex calculations to determine size and quantity of packaging equipment required based on project production goals., • Develop process flow diagrams, P&ID’s, and equipment layouts to meet customer specifications, throughput rates and sales goals; ensure designs and layouts conform to specifications, code requirements, and food safety requirements., • Responsible for creating or obtaining Packaging Specifications; Materials, Rates, Sizes, OEE, Compliance., • Develop specifications for packaging equipment and installation., • Assist in estimating equipment costs (design and material) for specified process, seek alternative methods that may reduce cost, review activities to ensure design stays within budget., • Coordinates with 3rd party engineering, architectural, OEM, and client resources., • Troubleshoot new and existing packaging line issues involving equipment, controls, designs, materials and processes and provide creative, timely, and cost-effective solutions., • Provide on-site project support to assist in accurate packaging equipment installation, startup and commissioning., • Commit to sustainability and cost-effectiveness in all packaging solutions., • Collaborate with cross-functional teams, internal and external, including project management, engineering, design, product development, marketing, and manufacturing., • Ensure all packaging solutions are innovative, functional, and aligned with company strategic goals, • Other duties as assignedRequired Skills/Abilities:, • Knowledge of packaging materials, processes, and technologies., • Proficiency in CAD software and/or other design tools, 3D software a plus., • Strong problem-solving and analytical skills., • Effective communication skills, both written and verbal, including interpersonal skills., • Innovative thinking and the ability to develop creative solutions., • Attention to detail and strong organizational skills., • Ability to work under pressure and meet tight deadlines., • Familiarity with industry regulations and standards., • Flexibility to work in different environments and adapt to changing project requirements.Education/Experience:, • Bachelor’s degree in Packaging Engineering, Mechanical Engineering, or a related field., • Experience with capital projects, either cost reduction initiatives or new line installation., • Minimum of 2-5 years of experience in packaging engineering or a related field., • Experience in AutoCAD 2D or a 3D design software is preferred., • Familiarity with industry regulations and standards.Travel Requirements:, • Ability to travel regularly for site visits, attend project meetings, corporate training, and events., • Ability to travel internationally, obtain and maintain a valid passport., • Travel expected to be at least 25%., • Flexibility to travel on short notice for urgent business needs., • Comfortable with various modes of transportation, including flights, trains, and rental cars., • Ability to navigate and work effectively in diverse geographical locations and time zones., • Ability to adapt to different cultures and customs while traveling., • Maintain a professional demeanor and appearance during business trips., • Compliance with company travel policies and procedures.Physical Requirements:, • Ability to use a computer, phone, iPad, printer, scanner, and other office equipment., • Visual acuity for detailed work and computer use., • Ability to lift, carry, and move up to 25 pounds of files, documents, and materials, • Ability to sit, stand, and walk for long periods of time, ability to climb flights of stairs and ladders., • Ability to bend, stoop, and reach as necessary., • Manual dexterity for operating office equipment, measuring devices, quality & testing devices., • Ability to work around machinery during installation, startup, commissioning, and troubleshooting., • Capability to handle occasional exposure to extreme heat, extreme cold, wet environments, and extreme odors.About Stellar Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Remote & hybrid work options for many positions, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job Description About The Energy Authority The Energy Authority is a public power-owned, nonprofit corporation with offices in Jacksonville, Florida, and Bellevue (Seattle), Washington. TEA provides public power utilities with access to advanced resources and technology systems so they can respond competitively in the changing energy markets. Through partnership with TEA, utilities benefit from an experienced organization that is singularly focused on deriving the maximum value of their assets from the market. Join Our Team as a Power Modeling Engineer Intern! Are you fascinated by how the electric grid works? Do you enjoy solving complex engineering problems, analyzing data, and building models that influence real-world decisions? If you're looking for an internship where you'll do more than observe—you'll contribute to meaningful work that impacts energy markets across the country—this opportunity is for you. At The Energy Authority (TEA), our interns are treated as valued members of the team. As a Power Modeling Engineer Intern, you'll work alongside industry experts to develop and enhance power system models, analyze transmission networks, forecast energy prices, and explore the rapidly evolving energy landscape. From renewable generation and battery storage to transmission planning and market optimization, you'll gain hands-on experience solving the kinds of challenges that shape the future of the electric grid. To maximize your learning and project ownership, interns must be available for a minimum commitment of two semesters (up to one year). Why You'll Love This Role • Work on real projects that directly influence energy market forecasting and decision-making., • Gain hands-on experience with power system modeling, production cost models, and optimal power flow (OPF)., • Collaborate with experienced engineers and analysts who are passionate about mentoring the next generation of talent., • Develop highly sought-after technical skills in programming, analytics, and power system simulation., • Build solutions that improve forecasting accuracy and support strategic decisions for utilities across North America., • Be part of a collaborative team where curiosity, innovation, and continuous learning are encouraged every day.What You'll DoBuild & Enhance Power Models, • Assist in refining and maintaining network models across multiple energy markets., • Research and integrate datasets used in optimal power flow (OPF) and production cost modeling., • Develop and maintain a repository of transmission upgrades to improve network model accuracy., • Automate simulation schedules and workflows to evaluate system sensitivities more efficiently.Analyze System Impacts, • Evaluate how new generation, battery storage, transmission projects, and large electrical loads influence future energy prices., • Support the development of standardized reporting for impact studies and modeling results.Collaborate & Communicate, • Partner with engineers, analysts, and stakeholders to improve model quality and analytical processes., • Present findings and technical insights in a clear and meaningful way to both technical and non-technical audiences.What You'll BringEducation, • Pursuing a Bachelor's degree in Electrical Engineering (Power/Energy Systems) or Operations Research., • Candidates pursuing a Master's degree are strongly encouraged to apply., • Coursework focused on power systems, optimal power flow, production cost modeling, or energy markets is preferred.Technical Skills, • Experience programming in at least one language such as Python or R., • Strong analytical and problem-solving abilities., • Interest in power system modeling, optimization, or energy market analysis.Bonus Points If You Have Experience With, • PLEXOS, • Dayzer, • PSS®E, • PowerWorld, • PSCAD, • Electric utility internships, • Power system analysis or planning, • Energy market modelingWhat Makes You Successful We're looking for someone who is: • Naturally curious and eager to learn., • Analytical with strong attention to detail., • Comfortable taking ownership of projects from start to finish., • Able to balance independent work with collaboration., • An effective communicator who can explain technical concepts clearly., • Organized, proactive, and committed to delivering high-quality work.Why TEA? At TEA, you'll gain experience that goes far beyond a typical internship. You'll work on meaningful projects, learn from industry leaders, and develop technical skills that will prepare you for a successful career in the power and energy industry. If you're excited about solving complex engineering challenges, working with cutting-edge modeling tools, and making a real impact on the future of energy, we'd love to hear from you. Join us and help model the future of energy. TEA Values TEA employees share a common sense of purpose. When TEA accomplishes its mission, the result is improved quality of life for the citizens and businesses of the communities our clients serve. TEA employees exceed the expectations of those they serve, deliver services with the highest standards of fair, honest, and ethical behavior, set the standard for service and expertise in our industry, embody a spirit of collaboration, and embrace TEA’s founding entrepreneurial spirit by seizing opportunities to deliver value. If you are self-motivated, driven to deliver excellence, and passionate about your career, TEA is the perfect place for you. It’s YOUR Future. It’s OUR Future.

Job Description Job Summary The Senior Azure Cloud & Network Engineer is responsible for implementing, supporting, and optimizing secure, scalable, and highly available Microsoft Azure infrastructure, with a strong focus on Azure networking, hybrid connectivity, automation, and cloud infrastructure engineering. This role works hands-on with Azure networking services, hybrid connectivity between on-premises and cloud environments, Infrastructure as Code (IaC), CI/CD pipelines, and cloud platform services. The position partners closely with infrastructure, security, DevOps, and application teams to deliver reliable, repeatable, and secure cloud environments that support enterprise and public-facing applications. The primary focus of this role is Azure cloud networking, with additional responsibility for traditional enterprise networking, infrastructure automation, troubleshooting, and operational support in a large, regulated environment. Minimum Qualifications Education • Bachelor’s degree in Information Technology, Computer Science, or a related field, or equivalent relevant work experience. Experience • 7+ years of experience in cloud infrastructure, network engineering, or related infrastructure roles., • Significant hands-on experience with Microsoft Azure, particularly Azure networking and hybrid connectivity., • Strong understanding of TCP/IP, BGP, OSPF, VLANs, DNS, DHCP, routing, and network segmentation., • Hands-on experience supporting hybrid on-premises and Azure cloud environments., • Experience with major cloud providers, with Microsoft Azure strongly preferred., • Experience using Infrastructure as Code and automation tools such as Terraform, Bicep, ARM templates, PowerShell, Python, or Azure CLI., • Experience with CI/CD pipelines and modern deployment practices., • Proven ability to work effectively in regulated or compliance-driven environments., • Strong troubleshooting, documentation, and analytical skills., • Ability to adapt within a large enterprise environment as technologies, processes, and business priorities evolve. Licensure, Certification, and/or Registration Preferred certifications include: • Microsoft Certified: Azure Network Engineer Associate (AZ-700), • Microsoft Certified: Azure Solutions Architect Expert (AZ-305), • Cisco CCNP Enterprise or equivalent networking certification, • Fortinet NSE certifications, • CompTIA Network+ or equivalent Certifications are preferred but may be substituted by equivalent hands-on experience. Primary Job Functions • Implement, support, and optimize enterprise Azure cloud infrastructure and networking environments., • Configure and manage Azure networking services, including Virtual Networks (VNets), subnets, routing, private connectivity, load balancing, DNS, VPN connectivity, and network security services., • Support Azure networking technologies such as Azure Virtual WAN, Azure Virtual Network Manager, Azure Front Door, ExpressRoute, Private Link, Private Endpoints, Application Gateway, and Azure Firewall, as applicable., • Build and support hub-and-spoke and other scalable Azure network topologies., • Implement and maintain Azure Landing Zone components related to networking, identity integration, governance, and resource organization., • Support secure hybrid connectivity between on-premises infrastructure and Azure using VPN, ExpressRoute, routing, and private connectivity technologies., • Implement and support multi-region and highly available cloud network environments to enable disaster recovery and business continuity., • Use Infrastructure as Code (IaC) tools such as Terraform and Bicep to provision and maintain cloud and network infrastructure., • Build and support CI/CD pipelines used to deploy cloud infrastructure and networking changes., • Create reusable automation, templates, scripts, and deployment patterns to improve consistency and reduce manual configuration., • Work with development and DevOps teams to integrate cloud infrastructure and networking requirements into application deployment processes., • Support cloud-native and platform services, including managed Azure services, containers, and event-driven technologies., • Implement Zero Trust networking principles, including segmentation, identity-based access, secure connectivity, and least-privilege access controls., • Monitor and troubleshoot complex Azure, hybrid cloud, and enterprise network connectivity issues., • Perform root-cause analysis and resolve performance, availability, routing, DNS, security, and connectivity issues., • Maintain technical documentation, network diagrams, configurations, operating procedures, and support documentation., • Support regulatory and security compliance requirements, including SOC, PCI, state DOI, and NYDFS., • Participate in technology upgrades, cloud migrations, network modernization efforts, and infrastructure improvement initiatives., • Collaborate with infrastructure, security, DevOps, application, and vendor teams to implement technical solutions. Periodic Job Functions • Other duties as assigned. Skills & Competencies Required Azure Cloud Networking Strong hands-on experience implementing and supporting Azure networking environments, including: • Azure VNets and subnets, • Routing and route tables, • Azure Virtual WAN, • Azure Virtual Network Manager, • Azure Front Door, • ExpressRoute, • VPN Gateway, • Private Link and Private Endpoints, • Application Gateway, • Azure Load Balancer, • Azure Firewall and network security controls, • Azure DNS, • Hub-and-spoke networking, • Network segmentation Hybrid Cloud Networking Experience implementing and supporting secure connectivity between on-premises environments and Azure, including VPN, ExpressRoute, routing, DNS, firewalls, and private connectivity. Enterprise Networking Strong understanding of: • TCP/IP, • BGP and OSPF, • DNS and DHCP, • VLANs, • Firewalls and VPNs, • LAN/WAN, • SD-WAN and SASE concepts, • Network segmentation, • Routing and switching fundamentals Infrastructure as Code & Automation Hands-on experience automating cloud infrastructure and networking using tools such as: • Terraform, • Bicep, • ARM templates, • PowerShell, • Python, • Azure CLI, • Git Experience integrating infrastructure automation into CI/CD pipelines and source-control workflows. Azure DevOps & CI/CD Experience working with: • Azure DevOps, • GitHub or other Git-based source-control platforms, • CI/CD pipelines, • Automated testing and deployment, • Version-controlled infrastructure, • Deployment approvals and change management Cloud Platform Engineering Ability to create and maintain reusable infrastructure templates, scripts, modules, and standardized deployment patterns that support application and development teams. Security & Compliance Knowledge of: • Zero Trust networking, • Identity-based access controls, • Network segmentation, • Security monitoring, • SIEM integration, • EDR, antivirus, ATP, IPS, and IDPS, • Regulatory and audit requirements such as SOC, PCI, state DOI, and NYDFS Ability to support compliance through appropriate technical controls, documentation, and evidence. Backup & Recovery Working knowledge of backup, recovery, disaster recovery, business continuity, and RPO/RTO concepts within cloud and hybrid environments. Technical Troubleshooting Strong ability to diagnose and resolve complex issues involving: • Azure networking, • Routing, • DNS, • VPN and ExpressRoute connectivity, • Firewalls, • Hybrid cloud environments, • Performance and availability, • Logs and monitoring, • Infrastructure automation and deployment failures Project & Work Management Ability to manage multiple technical initiatives, deadlines, vendors, and priorities while maintaining clear and accurate technical documentation. Adaptability Ability to learn and work with new technologies, tools, and processes while responding effectively to changing business and technical requirements. Critical Thinking Ability to: • Ask the right technical questions, • Analyze and assess technical information, • Identify assumptions and risks, • Troubleshoot methodically, • Evaluate alternative solutions, • Make sound technical decisions in complex environments Additional Information: Full benefit package including medical, dental, vision, life, company paid short/long term disability, 401(k), tuition assistance and more. The anticipated salary for this position is $110,000 - $125,000 per year, based on qualifications and experience. Recruitment Updates Fortegra has recently been made aware of unauthorized communications regarding career opportunities by individuals not associated with Fortegra or our recruitment team. Fortegra will only contact you from the Fortegra domain address (@fortegra.com). If you receive a message from someone posing as a Fortegra recruiter via text message, WhatsApp, Telegram or other messaging platform, please report it as phishing and block the sender. Fortegra is not accepting unsolicited resumes from search firms for this position. Internal Notice: As part of our commitment to talent development, this position is open for internal promotion applications at the time of public posting. #LI-Onsite

Job Description Application Engineer Position Type: Full-time, Exempt, Salary Reports to: Director Application Engineering Supervisory Responsibility: None Location: Jacksonville, FL (Corporate Headquarters) or Fort Worth, TX (Manufacturing Plant) Company Summary Stellar Energy is a trusted provider of turnkey liquid-to-chip cooling solutions for the world’s leading data center and industrial manufacturing customers. As computing demand and industrial processes continue to grow, modern facilities require cooling infrastructure that can scale quickly, efficiently, and reliably. Our modular approach enables high-volume production while maintaining the flexibility to customize each solution. From Central Utility Plants to Coolant Distribution Units, Stellar Energy delivers scalable cooling infrastructure designed to support the rapid expansion of data centers and mission-critical industrial operations. Backed by deep engineering expertise and large-scale manufacturing capability, Stellar Energy helps customers deploy critical infrastructure faster and with confidence. Summary Objective The Application Engineer is responsible for supporting the proposal, design, and execution phases of the business as required. Assigned projects could span multiple vertical markets, including Power Generation, Oil and Gas, Data Centers, Mission Critical, District Cooling, and Combined Heat and Power. Specific functions include (but are not limited to): analyzing project-specific weather profiles, building thermal performance modes, predicting/estimating output, efficiency, environmental impact, carrying out sensitivity analysis, technical writing, specification reviews, and equipment/process calculations. Essential Functions • Undertake engineering and design work independently., • Analyze and calculate the optimum weather design point based on project specific location., • Design and specify the process around the optimum design point., • Develop and improve thermal performance analysis tools to understand system performance., • Analyze, calculate and present the financial advantages and disadvantages to leadership., • Present and review various technical solutions with clients., • Contribute to the business development process and work with engineering and operations to prepare studies on internal products and services., • Participate in all facets of projects and pursuits including bid support, presentation support, augmentation philosophy development and competitor evaluations., • Provide technical support to sales and marketing for bids and proposals, such as performance analysis, schematics, equipment selection and specification review., • Create ROR/ROI models to support internal bid strategies, present to external clients and to prepare external publication materials for marketing purposes. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies • Technical Capacity., • Highly Organized., • Problem Solving/Analysis., • Financial Analysis Capabilities, • Excellent presentations skills., • Excellent written and verbal communication skills, internally and externally. Supervisory Responsibility This position has or does not have supervisory responsibilities. Work Location This position will work out of our Main Office in Jacksonville, FL. This position is not approved for telecommuting or working remotely. Work Environment Most work is performed in an office environment. Regular trips to SEA Fabrication Shop for observation and research are required. Physical Demands While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 8:00 a.m. to 5:00 p.m. Travel Anticipated up to 10% -15% travel for this position. Some occasional local day travel may also be necessary. Occasional travel to customer job sites and conferences may be required. Required Education and Experience. • Bachelor of Science degree in Engineering from an accredited University with focus on thermodynamics, heat transfer, or energy systems., • Proficiency with Microsoft Word and PowerPoint., • Advanced Excel skills particularly with macros and VBA., • Familiarity with design procedures and inter-discipline communication., • Familiarity with engineering deliverables (P&IDs, Single Line Diagrams, General Arrangements, etc.). Preferred Education and Experience • Proficiency with GT Pro/GT Master software, Ebsilon Professional, EtaPro, GateCcle, Pepse or similar thermodynamic modelling tools, • 3+ years of industry experience in thermal design, engineering specifically working with Gas Turbine OEMs (preferably knowledgeable in all Gas Turbine OEMs product offerings), Utility Owners, IPPs, EPCs, Technical advisory firms etc., • Understanding of Thermal Power Plant processes, equipment, and the interrelationships between them., • Understanding of thermodynamics, heat and mass balance equations, and performance correction curves as applied to simple cycle and combined cycle gas turbine gas turbines plants., • Experience with thermal performance guarantee test calculation, and ASME PTC codes. Master of Science degree in Engineering from an accredited University with focus on thermodynamics, heat transfer, and energy systems, • Familiarity with combustion turbine operation in power generation and/or oil and gas operation., • Familiarity with the US power and energy markets. Work Authorization Must be authorized to work in the USA. Benefits Summary We offer a competitive benefits package designed to support your health, financial well-being, and work-life balance: • Medical, dental, and vision insurance (multiple plan options; preventive care covered at 100% in-network), • Health Savings Account (HSA) with company contributions, • 401(k) with company match (100% match up to 3% + 50% match up to 6%), • Company-paid life insurance and AD&D coverage, • Short-term and long-term disability coverage options, • Supplemental benefits including accident, critical illness, and hospital coverage, • Wellness programs, including incentives up to $300 annually and a no-cost weight management program, • Virtual healthcare options, including $0 virtual visits in many cases, • Additional voluntary benefits including legal services and pet insurance, • Competitive PTO plan for exempt and non-exempt employees Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description About LSI LSI is an employee-owned company that employs dynamic teams of professionals – people with the finest technical expertise, a level of passionate creativity, and a truly visionary outlook who deliver innovative training solutions that exceed our customers’ expectations. Everyone at LSI has a personal stake in our success. LSI has over 300 training support experts, engineers, and craftsmen on staff who develop state-of-the-art high-fidelity training devices, complex computer-based, highly interactive distributed learning products, and comprehensive, dynamic technical publications. LSI employee-owners collaborate to deliver training products and services for a myriad of programs and customers, using leading-edge technology and proven processes. Mission Our mission is to prepare our military and allies to be battle-ready through cutting-edge training products and services. Vision Our vision is to be the premier provider of military training solutions, renowned for our innovation and excellence. Through employee-ownership and teamwork, we will shape a future where every military service member is equipped to succeed in their mission. Guiding Principles ESOP Sustainability: We do everything within our control to meet project budgets and schedules, so our ESOP prospers. Take Ownership: Each Employee-Owner takes ownership at the individual level for their words, actions, and results. Individual ownership breeds accountability. Accountability breeds trust. When we hold ourselves accountable and trust our fellow employee-owners to do the same, we realize success. Clear Communication: We project confidence in our communication using unambiguous language and providing clear purpose and direction. Pursuit of Excellence: We aggressively pursue continuous improvement both as teams and individual employee-owners. We strive to get better every day. There is no room for mediocrity. Pride in Our Work: We know the value of our work and are proud of what we produce. Customer Focus: Customers are both internal and external and we strive to give both our best efforts. Assume Positive Intent: Assume others are well-intentioned in their actions and seek additional information about the circumstances to help solve problems. Assuming positive intent in all interactions is the key to building strong teams and working together to solve problems. One Voice: Every Employee-Owner is expected to speak up if they have an idea for improvement or if they disagree with a potential course of action. Once a decision is made, the entire team commits to it and moves forward with one voice. Apply: https://www.lsijax.com/careers/ Deltek Talent Management - MECHANICAL ENGINEER II - (556) Summary: The Mechanical Engineer II is a mid-level position that performs and assists with full-lifecycle product development. Also assists in the creation of production drawings, checks designs to ensure they meet customer requirements and our internal standards, and provides technical guidance to manufacturing. Essential Job Functions: • Perform and assist in full lifecycle product development (design, develop, test prototypes, manufacture, and implement)., • Design systems and components that meet needs and requirements and ensure all designs meet both internal and external customer requirements and design standards., • Conduct experiments methodically, analyze data, and interpret results., • Test and evaluate theoretical designs., • Evaluate final product's overall performance, reliability, and safety., • Alter and modify design to meet requirements and to eliminate malfunctions., • Prepare product reports and documentation., • Troubleshoot mechanical discrepancies on trainers and/or aircraft as required., • Assist in creating production drawings for machined parts, sheet metal fabrication, and mechanical sub-assemblies., • Work with program management to develop cost and schedule baselines and targets., • Assist in the development of process improvement programs to reduce development time, improve product quality and manufacturability and reduce product cost., • May coordinate the efforts of drafters, technical writers, engineering technicians, and machine shop personnel as required., • Provide leadership and technical guidance to mechanics, technicians, and drafters., • Recommend design approaches to meet production requirements for new or improved products or processes., • Conduct design reviews with manufacturing and other applicable disciplines., • Must be capable of safely handling government furnished equipment and materials., • Must be available to work a standard weekly schedule with overtime as required., • Perform other duties as assigned. Job Requirements Knowledge, Skills, and Abilities: • Must have a working knowledge of AutoCAD and SolidWorks., • Must have knowledge of ASME Yl4.100-2000 & Yl4.5-1994 drawings., • Working experience with product Data Management (PDM), Product Lifecycle Management (PLM), and Finite Element Analysis (FEA)., • Solid understanding of core concepts including mechanics, kinematics, thermodynamics, materials science, etc., • Must have knowledge of various fabrication and assembly including metal machining, sheet metal fabrication, and welding., • Knowledge of industry and military specifications for materials, parts, and processes preferred., • Must have creativity, innovation, and commitment to excellence with the ability to work in a diverse and fast-paced environment., • Must work well in a team environment., • Must be able to travel., • Must be able to obtain security clearance if required by the contract. Education and Experience: • Bachelor's degree in Mechanical Engineering or Bachelor of Science in Engineering,, • Engineering Technology, or Aerospace Engineering with applicable specialty (i.e., mechanical or design), • Two (2) years applicable mechanical engineering experience., • Prior military with aviation maintenance experience a plus., • Working knowledge of 3D scanning equipment and 3D printing a plus., • Experience with Microsoft Office Suite, including Word, Excel, PowerPoint, and Project required. Equal Opportunity Employer including Disability/Vets.

Job Description Automation Engineer Company: EZ Automation Systems Location: Jacksonville, Florida Job Type: Full-Time About EZ Automation Systems EZ Automation Systems is an industrial automation and technology company specializing in custom automation, machine vision, robotics, artificial intelligence, and advanced quality inspection solutions for manufacturers. We work with customers to solve challenging manufacturing problems by combining innovative technologies with practical, production-ready engineering. Our projects span machine vision and inspection, robotics, motion control, custom automation, AI-enabled systems, and industrial software. We are looking for an Automation Engineer to join our growing engineering team and contribute to the design, development, integration, and commissioning of custom automation systems. About the Role The Automation Engineer will work across multiple engineering disciplines to take automation projects from concept through design, build, testing, installation, and commissioning. This is a hands-on, multidisciplinary engineering position. Rather than working within only one narrow specialty, our Automation Engineers are expected to develop broad knowledge across automation technologies while building deeper expertise in one or more specialty areas. The ideal candidate enjoys solving complex problems, learning new technologies, working directly with equipment, and seeing projects progress from an initial concept to a functioning production system. Key Responsibilities • Design and develop custom industrial automation systems., • Develop and troubleshoot PLC, HMI, controls, and industrial communication systems., • Integrate industrial robots, motion-control systems, sensors, actuators, and safety systems., • Support electrical design, component selection, schematics, panel design, and system wiring., • Support mechanical system design, fixtures, tooling, machine layouts, and component selection., • Select and integrate industrial cameras, lenses, lighting, 2D/3D vision sensors, and other inspection hardware., • Perform system integration across electrical, mechanical, controls, robotics, vision, and software components., • Participate in equipment assembly, system build, testing, and troubleshooting., • Develop and execute engineering tests and Factory Acceptance Testing (FAT)., • Install and commission systems at customer facilities., • Troubleshoot equipment and provide technical support during startup and production., • Create and maintain engineering documentation., • Participate in design reviews, technical risk assessments, and project planning., • Work closely with Solutions Engineers developing software, computer vision, AI, and data components., • Help develop reusable engineering standards, designs, code, and best practices. Qualifications • Bachelor's degree in Electrical Engineering, Mechanical Engineering, Mechatronics, Robotics, Automation Engineering, or a related technical field., • Experience with industrial automation, controls, robotics, machine building, or system integration., • Understanding of PLCs, industrial controls, sensors, motors, and automation equipment., • Ability to read and understand electrical and mechanical drawings., • Strong troubleshooting and problem-solving skills., • Comfortable working hands-on with industrial equipment., • Ability and willingness to learn technologies outside of your primary engineering specialty., • Strong communication and teamwork skills., • Ability to manage multiple technical priorities in a project-based environment., • Willingness to travel to customer facilities for installation, commissioning, troubleshooting, and support. Preferred Experience Experience in one or more of the following areas is highly desirable: • PLC and HMI programming, • FANUC, Universal Robots, or other industrial robotics, • Servo and motion-control systems, • Industrial machine vision, • Cognex, SICK, Keyence, Teledyne DALSA, or similar vision technologies, • Electrical controls and panel design, • Mechanical design and CAD, • Industrial networking and communication protocols, • Machine safety systems, • 2D/3D vision systems, • Automated inspection or quality-control systems, • Manufacturing equipment integration, • Factory Acceptance Testing and field commissioning Candidates are not expected to be experts in every area. We value engineers who have strong fundamentals, demonstrated expertise in one or more automation disciplines, and the ability and desire to expand their capabilities across the broader automation field. What We Are Looking For Beyond specific technical skills, we are looking for someone who: • Is naturally curious and enjoys figuring out how things work., • Takes ownership of technical problems and follows them through to resolution., • Is comfortable moving between design work and hands-on implementation., • Can independently research and learn unfamiliar technologies., • Thinks about the entire system rather than only their individual discipline., • Values quality, documentation, and repeatable engineering practices., • Works well in a collaborative, fast-moving engineering environment., • Enjoys solving problems that may not have an off-the-shelf solution. Why Join EZ Automation Systems? At EZ Automation Systems, engineers have the opportunity to work on a wide variety of technologies and applications rather than being limited to a single engineering discipline. You will work directly with robotics, machine vision, controls, motion, AI-enabled inspection, and advanced automation technologies while helping solve real manufacturing challenges. Our engineering philosophy is built around broad technical capability with deep specialization. Team members are encouraged to expand their capabilities across the automation field while becoming subject-matter experts in the areas where they excel. If you enjoy building things, solving difficult technical problems, learning new technologies, and seeing your engineering work operating on a production floor, we would like to hear from you. \nCompany Description EZ Automation Systems is a leading provider of intelligent automation solutions, delivering advanced AI, 3D vision, and robotic-guided inspection systems to industries worldwide. With a commitment to innovation and quality, EZ Automation Systems is shaping the future of industrial automation. EZ Automation Systems is a leading provider of intelligent automation solutions, delivering advanced AI, 3D vision, and robotic-guided inspection systems to industries worldwide. With a commitment to innovation and quality, EZ Automation Systems is shaping the future of industrial automation.

Job DescriptionSQL DATA ENGINEER HYBRID (JACKSONVILLE, FL) ARC Group has an immediate opportunity for a Senior SQL Data Engineer! This position is a hybrid position located in Jacksonville, FL, working 2-3 days onsite and other days remote. This is starting out as a contract position running through April 2025 with strong potential to extend longer or convert to FTE. This is a fantastic opportunity to join a well-respected organization offering tremendous career growth potential. At ARC Group, we are committed to fostering a diverse and inclusive workplace where everyone feels valued and respected. We believe that diverse perspectives lead to better innovation and problem-solving. As an organization, we embrace diversity in all its forms and encourage individuals from underrepresented groups to apply. C2C OR W2 Interview: 1st round: Video Webex interview 2nd round: Face-to-Face interview in Jacksonville, FL Reference# 17429-1 Onsite in Jacksonville, FL [Must be willing to work onsite from Jacksonville, FL] JOB SUMMARY: Responsible for development, programming, coding of Information Technology solutions using Python to enable enterprise Customer Experience applications. Responsible for documentation of the system, conduct unit tests, peer code reviews and maintenance of internally developed applications, evaluation and performance testing of purchased products. Responsible for including IT Controls to protect the confidentiality, integrity, as well as availability of the application and data processed or output by the application. REQUIREMENTS: • Experience with unit testing, release procedures, coding design and documentation protocol as well as change management procedures, • Demonstrated organizational, analytical and interpersonal skills, • In-depth understanding of the systems development life cycle, • May include database knowledge in; SQL, MySQL, Oracle DB, PostgreSQL, Cassandra, dBase, MS Access, etc, • Responsible for development, programming, coding of Information Technology solutions using Python, • Responsible for documentation of the system, conduct unit tests, peer code reviews and maintenance of internally developed applications, evaluation and performance testing of purchased products., • Responsible for including IT Controls to protect the confidentiality, integrity, as well as availability of the application and data processed or output by the application., • Excellent understanding of RESTful Architecture style., • We expect the candidate to have ability to take methodical approach to evaluate various libraries with pros and cons to meet business / technical requirements., • Excellent understanding of Python programming mode and required libraries to develop REST API Services., • Must have demonstrated experience developing REST APIs using Python., • Must have demonstrated experience processing batch files using Python, • Must have demonstrated experience developing scheduling of batch processes, • Proficiency using standard desktop applications such as MS Suite and flowcharting tools such as Visio REQUIRED EDUCATION/EXPERIENCE: • Related Bachelors degree or related work experience, • 5+ years related work experience, professional experience with technical design and coding in the IT industry, • UNIX or Linux shell scripting, • Advanced SQL scripting/querying, • Working knowledge of PySpark as well as Hadoop environment required, • Strong focus on working/analysis with very large data sets (millions of records), • Technical curiosity and willingness to learn (asks questions, learns processes, data flow, etc.) Would you like to know more about our new opportunity?For immediate consideration, please apply online and view all our open positions at www.arcgonline.com. ARC Group is a Forbes-ranked a top 20 recruiting and executive search firm working with clients nationwide to recruit the highest quality technical resources. We have achieved this by understanding both our candidate's and client's needs and goals and serving both with integrity and a shared desire to succeed. At ARC Group, we are committed to providing equal employment opportunities and fostering an inclusive work environment. We encourage applications from all qualified individuals regardless of race, ethnicity, religion, gender identity, sexual orientation, age, disability, or any other protected status. If you require accommodations during the recruitment process, please let us know. Position is offered with no fee to candidate.