Environmental inspector jobs in New York, New YorkCreate job alerts

AG Consulting Engineering, PC (AG) a design, engineering and construction management firm headquartered in Manhattan, New York is looking for a Mechanical Construction Inspector to support our client’s Project team in Manhattan and the Bronx. Position is immediate. Position: Mechanical Construction Inspector Location: Manhattan, NY Project: MTA Projects Responsibilities Primarily involving the inspection of mechanical, plumbing and fire protection systems with some concrete work, structural, electrical, architectural and environmental work. Project Scope: Remove the existing emergency pumps in all pump rooms. b. Remove the existing pneumatic Pumps in PR-3175 and PR-3177 and replace them with new emergency floor-mounted pumps. c. Provide new emergency pumps in all pump rooms. d. Replace existing pump car 4” ball valves with new 4” gate valves. e. Provide new 4” camlock pump car hose connectors, including 4” flanges and extension pipes in all pump rooms. f. Provide discharge pipes along the tracks for PR-2133 and PR-2134. g. Clean track drain inlets pipes. h. Replace baffles plates entering the sumps. i. Provide check valves in existing pressure relief manholes. Experience in many types of mechanical construction including mechanical equipment room upgrades and rehabilitation, hot water generators, boilers, breeching, piping installation/replacement/upgrades, water distribution systems, building management systems, HVAC installation and controls, fire alarm upgrades, security system upgrades, pump systems. Ability to read plans and specs and prepare written contract administration documentation such as daily narratives (work reports), controlled inspection reports, daily time and material records, and document unit price work. Identify potential extra work issues and keep Resident Engineer advised of issues. Review plans for constructability and prepare comments. Qualifications: -Bachelor’s Degree in Mechanical Engineering from an accredited college or university is preferred. -Minimum 5 years’ experience inspecting construction work -Valid Driver’s License required. - OSHA 30-hour certification required. - PMG123 Certification - Active NYCT Track Safety Training - Excellent oral and written communication and presentation skills. --Familiarity with Microsoft Outlook, Word and Excel. - Night and weekend shifts will be required. A.G. Consulting Engineering, P.C. offers salary commensurate with experience, a comprehensive benefits package which includes medical, dental, disability, life insurance, 401K plan, tuition reimbursement, and more. A.G. Consulting Engineering, P.C. is an Equal Opportunity Employer. AG is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law.

Job Description Asbestos & Lead Project Manager Advanced Environmental Corp. located in New York City is currently looking hire qualified candidates to provide environmental consulting services. Position Description We are seeking a full-time Project Manager to be responsible for Asbestos, Lead, Mold, and other Indoor Air Quality (IAQ) project management. Experience in NYC environmental/industrial hygiene field required. The successful candidate will manage projects in the New York City Area. As a project manager you will be responsible for coordination, field investigation, sampling and reporting. The ideal candidate will be able to complete projects with Asbestos and Lead Inspections, HUD Lead XRF Testing, Abatement, Mold and other various IAQ projects. Experience Required • Experience in related NYC asbestos/environmental/industrial hygiene field., • NYC Asbestos Investigator license required., • NYS Asbestos Inspector Certification Bachelor’s degree preferred. Benefits AEC offers competitive compensation, bonus opportunities, group medical insurance, 401k plan with employer contribution, tuition reimbursement, paid vacation, and progressive career opportunities. Submittal Please submit a resume and cover letter in Word or PDF format via email. You must include the following information: • Reference title, • Brief summary of past related experience (highlight your experience as it relates to our need & industry), • List of your education credentials and professional registrations Advanced Environmental Corp. works with leading companies in finance, real estate, manufacturing, insurance as well as hospitals and universities. We establish a continuing partnership with clients to provide technically advanced services that exceed industry standards and contribute to long-term success. More than 85 percent of our revenue is generated by existing clients or through referrals, confirming our reputation for excellence in the industryAdvanced Environmental Corp. is a privately owned, independent consulting firm specializing in turn-key environmental and occupational hygiene services since 1999. Advanced Environmental Corp. delivers cost-effective strategies to access and evaluate, and then resolve major environmental risks associated with the ownership and management of commercial, industrial and municipal properties. Our staff of professional’s works directly with private and public sector clients to solve complex environmental issues, using customized analysis, design, management and program development. \r\n\r\nAdvanced Environmental Corp. works with leading companies in finance, real estate, manufacturing, insurance as well as hospitals and universities. We establish a continuing partnership with clients to provide technically advanced services that exceed industry standards and contribute to long-term success. More than 85 percent of our revenue is generated by existing clients or through referrals, confirming our reputation for excellence in the industry

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Plans, coordinates, and institutes functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This is a transitional position for someone with the required field experience and/or education to gain project engineering experience in a supervised manner prior to advancing into the Project Engineer role. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Solves complex problems and calculations, using engineering formulas and skills, • Evaluates research by others and writes reports, • Assists the Project Engineer in the preparation of proposal estimates of time and expenses required to complete the project, • Assists the Project Engineer in scheduling staffing requirements for field projects, • Assists the Project Engineer in supervising and instructing, as needed, the responsibilities of field personnel on projects assigned to them, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Participates in the integration of technical activities, • Evaluates and presents changes for design, specifications, drawing releases, reports, etc to the Project Engineer and /or Project manager for approval, • Prepares interim and completion project reports, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Performs site inspection to monitor progress/conformance to specs and procedures, • Designs portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • Plans schedule of research according to company’s or contracting organization’s timetable and establishes daily or weekly routines necessary to meet project timetable, • Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project, • Supervises field work and performs field work when needed, • Establishes work plan and staffing for each phase of project and arranges for recruitment or assignment of project personnel, • Confers with project staff to outline workplan and to assign duties, responsibilities, and scope of authority, • Directs and coordinates activities of project personnel to ensure project progresses on schedule and within prescribed budget, • Supervises and delegates assignments to staff, • Oversees staff’s daily activities to ensure it is correct and complete, • Reviews status reports prepared by project personnel and modifies schedules or plans as required, • Prepares project reports for management, client, or others, • Confers with project personnel to provide technical advice and to resolve problems, • Coordinates project activities with activities of government regulatory or other governmental agencies, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in civil engineering with a minimum of 3-5 years of field or related experience where a PE license counts towards that related experience, a bachelor’s degree in a related field, and demonstrates ability to meet the requirements of the job as set forth in this description. Previous construction experience is preferred., • Professional Engineer (PE) license is preferred or have the ability to become licensed within 2 years of being in this position., • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE) preferred or have the ability to become licensed within 2 years of being in this position., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% up to 75% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $90,000–$120,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description Location: Orange & Rockland Counties, NY Are you passionate about safety and making an impact in the field? We’re looking for a Safety Inspector with Environmental, Health & Safety (EHS) experience to support utility and construction projects by ensuring job site compliance and championing a culture of safety. • Long-term opportunity with consistent work, • No Operator Qualifications (OQs) required, • No civil or facility construction experience needed, • Mileage reimbursement between job sites, • Work in a lower-cost-of-living region with no per diem required If you're ready to step into a meaningful safety role that supports the people building and maintaining our infrastructure, we’d love to hear from you! Compensation: $50 - $60 hourly Responsibilities: • Perform field safety inspections and audits on active job sites, • Identify hazards, ensure proper use of PPE, and promote safe work practices, • Communicate safety expectations clearly and professionally to field teams, • Document inspections, track findings, and follow up on corrective actions, • Ensure compliance with OSHA regulations and internal company proceduresQualifications:, • Field experience in EHS or safety inspection roles, • Strong knowledge of OSHA standards, • Excellent communication and documentation skills, • Ability to build trust and accountability with frontline crewsAbout Company, • For all of our team members (Joes): We provide a values-driven, Kingdom-focused culture that puts people first, prioritizing growth and professional development. By providing insight, opportunities, and encouragement, we empower individuals to flourish and achieve their God-given potential in every area of life., • For our Leadership Team: We provide opportunities for growth, strategic influence, collaborative development, and a position of ownership and stewardship within a Kingdom-focused organization. Together, we embrace the joy of collective impact, shared purpose, and building toward a long-term vision that is greater than ourselves., • For Clients: We deliver elite leadership and services designed to help organizations thrive. Through a culture of accountability, collaboration, and transparency, we enable clients to achieve their purpose and elevate their impact.

Job DescriptionMatrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at and True-Environmental.com to discover the full scope of our capabilities. We are currently seeking a highly experienced Industrial Hygiene Specialist to independently manage and execute asbestos, lead, mold, and general industrial hygiene project consulting assignments in the New Jersey / New York metro area.Annual Salary Range: $40 – $55 per hour commensurate with experience and certificationsWhat You'll Do • Independently perform and manage air monitoring for asbestos abatement, lead, and mold remediation activities., • Conduct complex indoor air quality investigations, including sampling design and interpreting results related to water intrusion events., • Serve as the primary on-site representative for routine and non-routine site inspections, including comprehensive bulk sample collection., • Develop complete, high-quality technical reports, memos, and addendums, requiring minimal review from Project Management, to document site conditions and project-related issues., • Conduct job site health & safety inspections and identify/document potential hazards., • Interact directly with contractors and sub-contractors to coordinate site access and daily activities., • Mentor and train Junior Technicians on field procedures, safety protocols, and sampling techniques.Minimum Qualifications, • High School diploma required; AS or BS degree in a related field is strongly preferred., • Minimum of 3-5 years of direct experience performing asbestos, lead paint, IAQ/mold, and general industrial hygiene monitoring/inspections., • Strong oral and written communication skills with proven ability to draft professional technical reports., • Possession of a comprehensive combination of certifications (minimum of 3 of the following):, • EPA AHERA / NYSDOL Asbestos Project Monitor and Air Sampling Technician, • NYSDOL Mold Assessor, • NJ/EPA/NY Lead Risk Assessor/Inspector, • NYCDEP Asbestos Investigator, • Thorough working knowledge of MS Office software and industry-specific software/databases., • Strong knowledge of applicable OSHA, EPA, and state/local regulations for asbestos, lead paint, etc., • Must be willing to travel to and from job sites within the NJ / NYC area., • Must be able to pass a physical exam and be medically cleared to wear negative pressure respirator., • Must be available to occasionally work night or weekend hours and/or extended shifts beyond 8 hours., • Must possess a valid driver’s license and an acceptable driving record., • Must successfully pass a pre-employment drug test and will be subject to DOT-regulated random drug & alcohol testing.Preferred Qualifications, • OSHA 40-hour HAZWOPER certification., • Additional asbestos accreditations (e.g., EPA/NYSDOL Project Designer, Certified Safety Professional)., • Experience performing health and safety oversight and/or construction management.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Plans, coordinates, and institutes functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This is a transitional position for someone with the required field experience and/or education to gain project engineering experience in a supervised manner prior to advancing into the Project Engineer role. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Solves complex problems and calculations, using engineering formulas and skills, • Evaluates research by others and writes reports, • Assists the Project Engineer in the preparation of proposal estimates of time and expenses required to complete the project, • Assists the Project Engineer in scheduling staffing requirements for field projects, • Assists the Project Engineer in supervising and instructing, as needed, the responsibilities of field personnel on projects assigned to them, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Participates in the integration of technical activities, • Evaluates and presents changes for design, specifications, drawing releases, reports, etc to the Project Engineer and /or Project manager for approval, • Prepares interim and completion project reports, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Performs site inspection to monitor progress/conformance to specs and procedures, • Designs portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • Plans schedule of research according to company’s or contracting organization’s timetable and establishes daily or weekly routines necessary to meet project timetable, • Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project, • Supervises field work and performs field work when needed, • Establishes work plan and staffing for each phase of project and arranges for recruitment or assignment of project personnel, • Confers with project staff to outline workplan and to assign duties, responsibilities, and scope of authority, • Directs and coordinates activities of project personnel to ensure project progresses on schedule and within prescribed budget, • Supervises and delegates assignments to staff, • Oversees staff’s daily activities to ensure it is correct and complete, • Reviews status reports prepared by project personnel and modifies schedules or plans as required, • Prepares project reports for management, client, or others, • Confers with project personnel to provide technical advice and to resolve problems, • Coordinates project activities with activities of government regulatory or other governmental agencies, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in related field with a minimum of 3-5 years of field or related experience where a LSRP license counts towards that related experience, a bachelor’s degree in a related field, and demonstrates ability to meet the requirements of the job as set forth in this description. Previous construction experience is preferred., • Licensed Site Remediation Professional (LSRP) license is preferred or have the ability to become licensed within 2 years of being in this position., • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE) preferred or have the ability to become licensed within 2 years of being in this position., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% up to 75% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $85,000–$115,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Coordinates the planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This staff position is considered a training position for those with degrees in a related field but with limited to no field experience. Essential Duties and Responsibilities include the following. Other duties may be assigned • Conducts site inspection to monitor progress/conformance to specs and procedures, • May be expected to design portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of unapproved materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Prepares interim and completion project reports, • Provides status and progress reports to customer, project team, and management, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • May lead junior level staff and interns by providing guidance, answering questions and being a resource to them, • May direct tasks, other junior level staff and interns as needed, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Travels 25% (Site) to 100% (Geotechnical/Environmental) of the time which may be out of state Supervisory Responsibilities: This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in Civil Engineering with a minimum of 0 to 3 years of Site Civil, Geotechnical or Environmental engineering experience. Previous Internship or construction experience is preferred., • Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements., • 40-hour OSHA HAZWOPER certification, • Engineer in Training (EIT) preferred or have the ability to become registered within six months., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, MS Word, Excel, Adobe. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk and sit. The employee must frequently lift and/or move up to 50+ pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Approximately 25% to 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $55,000–$80,000 + overtime, mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job DescriptionDescriptionCME Associates, a leading engineering and consulting firm in Parlin, NJ, is seeking a highly skilled Inspector to join our team. The ideal candidate will have experience in various construction aspects, ideally, including sheet pile, and concrete formwork & reinforcement. Experience in water main, storm sewer, paving, and civil site work is a plus. As an Inspector, you will play a crucial role in ensuring compliance with project specifications and industry standards. Responsibilities • Conduct Inspections: Perform on-site inspections to monitor construction activities and ensure compliance with project plans, specifications, and applicable codes., • Documentation: Maintain accurate records of construction activities, including daily reports, photographs, and inspection logs., • Quality Assurance: Conduct quality assurance checks on materials, workmanship, and construction processes to ensure conformance with project requirements., • Coordinate with Contractors: Communicate regularly with contractors to address concerns, provide guidance, and facilitate the resolution of construction-related issues., • Compliance Oversight: Monitor contractor compliance with safety regulations, environmental requirements, and permit conditions., • Progress Reporting: Provide regular progress updates to project managers and clients, highlighting milestones achieved and potential delays., • Problem Resolution: Identify and resolve construction-related problems promptly to minimize project disruptions and maintain schedule adherence. Qualifications • Experience: Minimum of 3 years of relevant experience in construction inspection, preferably in the areas of pile driving, concrete work, water main, storm sewer, paving, and civil site work., • Certifications: Possession of relevant certifications such as ACI Concrete Field Testing Technician Grade I, NICET certifications, or equivalent., • Knowledge: In-depth understanding of construction methods, materials, and industry regulations., • Communication Skills: Strong verbal and written communication skills to effectively interact with contractors, clients, and project stakeholders., • Attention to Detail: Meticulous attention to detail to identify discrepancies and ensure adherence to project specifications., • Problem-Solving Skills: Ability to troubleshoot issues and propose effective solutions in a dynamic construction environment., • Team Player: Demonstrated ability to work collaboratively within a multidisciplinary team environment. BenefitsCME offers a competitive compensation package including: medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off.

Job Description An award-winning consulting engineering firm located in Elmwood Park, New Jersey is seeking a mid-level candidate who is willing to join our environmental/hazardous materials team. Under the supervision of a Project Manager, the candidate will conduct office and field work for the clients in compliance with environmental and hazardous materials regulations. Candidate will schedule work, communicate with clients, budget projects, as well as perform related duties as required. DUTIES AND RESPONSIBLITIES: • Asbestos/lead paint and other hazardous substances investigation and sampling of suspect materials in compliance with sampling protocol., • Project monitoring during asbestos abatement., • Develop and/or review abatement and remediation plans and specifications. Ability to read architectural and MEP drawings., • Evaluate laboratory results, assess, and delineate the extent of hazmat location areas., • Assist Project Manager in developing survey reports, abatement plans and construction documents for abatement., • Interact with responsible parties and their representatives., • Ability to work effectively under the deadline.REQUIREMENTS:, • Bachelor’s degree in environmental science, engineering, or related field., • 3-5 Years of experience in related field., • Perfect knowledge of computer applications: Word, Excel, Power Point, etc., • Good writing and communication skills., • Comply with Federal, State and NYC regulations on abatement and handling of asbestos, EPA for lead paint, PCBs, mold, and other hazardous materials., • AutoCAD is a plus.PREFERRED CERTIFICATIONS:, • NYCDEP Asbestos Investigator, NYSDOL Asbestos Inspector and Project Monitor; EPA Lead Inspector; NYSDOL Mold Assessor.WORKING CONDITIONS AND PHYSCIAL EFFORT:, • Ability to work both in the office and in the field., • Quick mobilization for field work if required. YU & Associates’ is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation, • Beneficiary Grief Support SALARY RANGE: $90,000 - $120,000 Powered by JazzHR fNA8KUKw8W

Job DescriptionThis job is located at Newark/Teterboro Airports in NJ. SCOPE – Primarily building concrete work, civil site work, paving work, drainage systems, hydrant fuel systems, structural, and maintenance of traffic, with some electrical, environmental, and plumbing knowledge. REQUIREMENTS – Willingness to learn and ability to communicate effectively both orally and in writing. Verbal communication includes speaking with the Resident Engineer, other contract staff, and facility staff both in person and via two-way communications. Ability to read and interpret plans and specs and prepare written contract administration documentation such as daily narratives (work reports), special inspection reports, daily time and material records, and document unit price work. Identify potential extra work issues and keep the Resident Engineer advised of possible problems. Review plans for constructability and prepare comments. Ability to conduct preconstruction and construction progress meetings, coordinate multiple work locations, perform audit inspection throughout the construction process, and coordinate quality assurance inspection of completed work. Ability to actively coordinate between private business entities and the various departments within the facility. Verify safety procedures are maintained—working knowledge of NYCBC. Coordinate contractors' work with the Facility as needed. MINIMUM REQUIREMENTS • A bachelor’s Degree in Civil or Structural Engineering is preferred. • Minimum 5 years of experience inspecting construction work varying in size (projects ranging from $500K to $5 million plus) and complexity (multiple crews and crew sizes per shift). • Valid Driver's License required. • Night and weekend shifts are required • Ability to obtain a high SWAC clearance or SIDA at Airports or TWIC at Ports. • Trained in OSHA 30-hour construction safety. • ICC/NICET Level 3 Asphalt or Highway Construction; ACI Concrete Special Inspector; and Work Zone Safety Certifications are desirable.

Job DescriptionMatrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at and True-Environmental.com to discover the full scope of our capabilities. We are currently seeking a motivated Industrial Hygiene Technician to learn and support asbestos, lead, mold, and universal waste project monitoring and air sampling assignments in the New York metro area. Annual Salary Range: $25 – $35 per hour commensurate with experience and certifications What you'll do • Assist in performing air monitoring for asbestos abatement, lead, and mold remediation activities under direct supervision., • Conduct basic, routine site inspections and collect bulk samples following strict protocols., • Log field data, site conditions, and project-related issues for review by senior staff., • Assist senior staff with the investigation of indoor air quality and water intrusion events., • Attend job site health & safety inspections as an observer and trainee., • Support the preparation of reports and memos by organizing field data and documentation., • Maintain and calibrate field equipment and ensure compliance with proper chain-of-custody procedures.Minimum Requirements, • High School diploma or equivalent required., • 0-1 year of experience in a related field; recent graduates with relevant coursework or internships are encouraged to apply., • Basic oral and written communication skills; ability to document field notes clearly., • A minimum of one core certification is preferred (e.g., EPA/NYSDOL Air Sampling Technician or EPA/NYSDOL Asbestos Inspector)., • Working knowledge of MS Office software (Word, Excel)., • Must be willing to travel to and from job sites within the NJ/NYC area., • Must be able to pass a physical exam and be medically cleared to wear negative pressure respirator., • Must be available to occasionally work night or weekend hours and/or extended shifts beyond 8 hours., • Must possess a valid driver’s license and an acceptable driving record., • Must successfully pass a pre-employment drug test and will be subject to FRA-regulated random drug & alcohol testing.Preferred Qualifications, • AS or BS in physical sciences, industrial hygiene, safety, environmental sciences, or related science or engineering fields., • OSHA 10-hour or 30-hour Construction Safety certification., • Additional accreditations for asbestos, mold, or lead.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Coordinates the planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This staff position is considered a training position for those with degrees in a related field but with limited to no field experience. Essential Duties and Responsibilities include the following. Other duties may be assigned. · Makes calculations, using engineering formulas and skills · Instructs drafters how to reduce designs into completed drawings · Conducts routine geotechnical engineering laboratory checks · Leads concrete and rebar inspection testing · Performs research and writes reports · Prepares samples of unapproved materials for laboratory testing · Uses computer to run standard programs to solve engineering problems · Performs routine laboratory tests to determine various design parameters · Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements · Develops and maintains a schedule and budget for the assigned engineering project · Provides reports on the status of project milestones and adjusts schedules accordingly · Controls expenditures within limitations of project budget · Identifies project staffing requirements and coordinates staffing with supporting organization managers · Coordinates preparation and delivery of project deliverables, design documents, and bid packages · Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications · Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems · Prepares interim and completion project reports · Provides status and progress reports to customer, project team, and management · Classifies soils according to standard types · Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings · Prepares geologic reports and maps, interprets research data, and recommends further study or action · Conducts or participates in environmental studies and prepares environmental reports · Directs drilling of exploratory borings and wells · Oversees installation of monitoring wells in accordance with state and federal requirements · Collects or supervises collection of soil and groundwater samples for analysis of chemical composition · Determines direction of groundwater flow based on review of historical records and site specific data · Determines the nature and extent of contamination in soil and groundwater at environmental sites · Participates in decision making regarding research priorities and provides information on feasibility of prospective projects Supervisory Responsibilities This job has some supervisory responsibilities. Qualifications - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations. Education and/or Experience Bachelor’s degree in Civil Engineering (or applicable Engineering Degree) with a minimum of 0 to 3 years of Site Civil, Geotechnical or Environmental engineering experience. Previous Internship or construction experience is preferred. Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements. Certificates, Licenses, Registrations 40-hour OSHA HAZWOPER certification Registered Professional Engineer (PE) preferred or have the ability to become licensed within 6 months of being in this position ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification Valid Driver’s License and possess reliable transportation to access job sites Language Skills Proficient in communicating both verbal and written in the English language. Proficient in communicating both verbal and written in the English language. Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe. Tools/Equipment Position requires ability to use tools such as a lump hammer, shovel, hand auger, Nuclear Density Gauge. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% to 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Base salary $55,000–$80,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Coordinates the planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This staff position is considered a training position for those with degrees in a related field but with limited to no field experience. Essential Duties and Responsibilities include the following. Other duties may be assigned. · Makes calculations, using engineering formulas and skills · Instructs drafters how to reduce designs into completed drawings · Conducts routine geotechnical engineering laboratory checks · Leads concrete and rebar inspection testing · Performs research and writes reports · Prepares samples of unapproved materials for laboratory testing · Uses computer to run standard programs to solve engineering problems · Performs routine laboratory tests to determine various design parameters · Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements · Develops and maintains a schedule and budget for the assigned engineering project · Provides reports on the status of project milestones and adjusts schedules accordingly · Controls expenditures within limitations of project budget · Identifies project staffing requirements and coordinates staffing with supporting organization managers · Coordinates preparation and delivery of project deliverables, design documents, and bid packages · Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications · Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems · Prepares interim and completion project reports · Provides status and progress reports to customer, project team, and management · Classifies soils according to standard types · Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings · Prepares geologic reports and maps, interprets research data, and recommends further study or action · Conducts or participates in environmental studies and prepares environmental reports · Directs drilling of exploratory borings and wells · Oversees installation of monitoring wells in accordance with state and federal requirements · Collects or supervises collection of soil and groundwater samples for analysis of chemical composition · Determines direction of groundwater flow based on review of historical records and site specific data · Determines the nature and extent of contamination in soil and groundwater at environmental sites · Participates in decision making regarding research priorities and provides information on feasibility of prospective projects Supervisory Responsibilities This job has some supervisory responsibilities. Qualifications - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations. Education and/or Experience Bachelor’s degree in Civil Engineering (or applicable Engineering Degree) with a minimum of 0 to 3 years of Site Civil, Geotechnical or Environmental engineering experience. Previous Internship or construction experience is preferred. Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements. Certificates, Licenses, Registrations 40-hour OSHA HAZWOPER certification Registered Professional Engineer (PE) preferred or have the ability to become licensed within 6 months of being in this position ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification Valid Driver’s License and possess reliable transportation to access job sites Language Skills Proficient in communicating both verbal and written in the English language. Proficient in communicating both verbal and written in the English language. Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe. Tools/Equipment Position requires ability to use tools such as a lump hammer, shovel, hand auger, Nuclear Density Gauge. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% to 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Base salary $55,000–$80,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Inspects and oversees construction of buildings, dams, utilities, walls, pavement, and other types of construction work to ensure that procedures and materials comply with plans and specifications by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Conducts pile inspections, inspections of deep dynamic compaction process, • Observes compacted fills (including use of nuclear density gauges), • Observes utility installation, concrete testing and rebar inspection, • Measures distances to verify accuracy of dimensions of structural installations and layouts, • Performs inspections of deep dynamic compaction process, • Verifies levels, alignment, and elevation of installations, • Observes work in progress to ensure that procedures are followed and materials used conform to specifications, • Prepares samples of materials for laboratory testing and performs the tests, • Examines workmanship of finished installations for conformity to standard and approves installation, • Interprets blueprints and specifications for Contractor and discusses deviations from specified construction procedures to ensure compliance with regulations governing construction, • Records quantities of materials received or used during specified periods, • Maintains daily logs of construction and inspection activities and completes daily progress reports, • Prepares sketches of construction installations, • Participates in environmental audits and prepare data summaries, data tables, data mapping and presentation, and preparation of environmental reports, • Follows blueprints, guidelines, and/or diagrams, • Responsible for the operation and maintenance of equipment, • Assists environmental engineers in the development of remediation devices, • Classifies soils according to standard types, • Examines rocks, minerals, and fossil remains to identify and determine sequence of processes affecting development of earth, • Applies knowledge of chemistry, physics, biology, and mathematics to explain these phenomena and to help locate mineral, geothermal, and petroleum deposits and underground water resources, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Performs environmental soil sampling, • Prepares summary and certification letters and reports, • Conducts pile and deep foundation inspections, • Inspects ground improvement, • Observes borings, test pits, geoprobes and cone penetrometer tests, • Conducts permeability testing and well monitoring, • Prepares project cost estimates, proposals, reports and mentors junior staff, • Works under general supervision with latitude for independent judgment, • Displays moderate skills with high level of proficiency, • Adheres to environmental, construction and OSHA safety policies and procedures to be in compliance with local, state, and federal environmental regulations, • Consults with senior peers on certain projects, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis This job has some supervisory responsibilities. Qualifications - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations. Education and/or Experience Preferred Bachelor's degree from four-year college or university; or one to four years related experience and/or training with HS Diploma or GED; or equivalent combination of education and experience. Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements. Certificates, Licenses, Registrations 40-hour OSHA HAZWOPER certification ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus Valid Driver’s License and possess reliable transportation to access job sites Language Skills Proficient in communicating both verbal and written in the English language. Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe Tools/Equipment Position requires ability to use tools such as a lump hammer, shovel, hand auger, Nuclear Density Gauge. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting Approximately 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Base salary $50,000–$70,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description Armand Corporation, an award-winning M/WBE Construction Management firm celebrating over 34 years in the industry, is seeking a full-time Construction Inspector to join our construction management team. The ideal candidate has at least 5 years of experience with designing, installing, constructing, and inspecting various types of building concrete work, civil site work, paving work, drainage systems, hydrant fuel systems, structural, and maintenance of traffic, with some electrical, environmental, and plumbing knowledge., and holds valid driver's license for use of visiting various construction sites across New York and New Jersey. If selected, candidates will need to provide digital proof of licensure and certification for all U.S.-based accolades, including academic degree, before time of interview. Information provided is handled with discretion and will be used purely for benefit of employment with various government agency clients and associated background checks. This position will be full-time, On-site in New York/New Jersey Metro area. JOB RESPONSIBILITIES include, but are not limited to, the following: • Work under various engineering managers and quality assurance division heads to oversee ongoing construction of various civil job sites., • Attend acceptance inspections of new construction to confirm that work performed meets requirements of approved contract drawings., • Read and perform inspections on contract drawings to ensure quality of architectural, structural, mechanical, electrical, and plumbing elements, • Liaise with construction teams, either electronically from main office building, or directly in-person to ensure proper adherence to drawing code and upkeep is performed across all phases of construction., • Organize and prepare work reports on all ongoing projects., • Perform additional responsibilities as necessary.QUALIFICATIONS include, but are not limited to, the following:, • At least 5 years of experience with inspecting construction work varying in size (projects ranging from $500K to $5 million plus) and complexity (multiple crews and crew sizes per shift)., • Working knowledge of construction codes for New Jersey, New York City, and New York State, along with the related referenced standards such as ADA Standards, etc., • ICC/NICET Level 3 Asphalt or Highway Construction; ACI Concrete Special Inspector; and Work Zone Safety Certifications are desirable., • Must be able to demonstrate the ability to read and interpret construction drawings., • Bachelor’s Degree in Civil or Structural Engineering is preferred, but not required., • A valid driver’s license is required., • Night and weekend shifts are required, • OSHA 10 at minimum (additional training will be provided, if required). Supported scaffold training may be required as well, as need by project., • Ability to pass a TWIC, SIDA, and/or SWAC background check at a high level., • Strong written and verbal communication skills, • Must be authorized to work in the United States hyGbCMfdGB

Job Description Associate 3+ (Engineer for Building Envelope Group) Salary Range:$120,000.00 To $195,000.00 Annually About the job: We are seeking an intermediate to senior-level professional engineer to join our Building Envelope team in either Chicago or New York City. The ideal candidate has boundless curiosity (enjoys asking why things are done the way they are), a passion for delivering high-caliber work, and an enthusiasm for general building design. Energy and circularity will be transforming the way building envelopes are manufactured, designed, and constructed over the next decade.This is your opportunity to be a part of a team that will learn, teach, test, and deliver the next generation of building envelope designs, repairs, reuse, and investigative solutions. Key Responsibilities • Conduct thorough on-site inspections to assess damage, failures, or defects., • Collect and analyze data related to environmental, material fabrication, and construction practices., • Apply engineering first principles and analytical methods to determine root causes of building envelope problems, including the root causes of air infiltration, water infiltration, condensation, thermal radiation, and solar radiation., • Develop recommendations for the repair or retrofit of envelope structural components based on forensic findings., • Prepare detailed engineering reports documenting observations, analyses, findings, and recommendations as the lead or as part of a team when needed., • Support expert witness projects, as needed. Prepare and participate in depositions, as required., • Manage and oversee projects, ensuring deadlines and budget constraints are met., • Stay abreast of advancements in building envelope systems, energy codes, materials science, and forensic analysis., • Experience with terra cotta, brick, or stone masonry systems – or Experience with a variety of window wall, curtainwall, skylight, and storefront systems. Experience with both is an asset., • Explore markets in an area of your expertise and assist in business development activities toward meeting new technical peers and potential clients., • Proactively participate in professional development and thought leadership activities., • Education: Bachelor’s degree (BS) in Civil Engineering, Architectural Engineering, or Structural Engineering required; an Advanced degree (MS / PhD) is an asset., • Experience: 5-10+ years of project experience in building envelope design, repair, and investigation., • Licensure: Professional licensure is a requirement, either Professional Engineer (PE) in the State of New York or Structural Engineer (SE) in the State of Illinois (or the ability to attain one within six months of hire), with both licenses an asset., • Certifications (For NY candidates only): Qualified Exterior Wall Inspector (QEWI) designation from New York City Department of Buildings or ability to obtain QEWI within 6 months of start. Experience with NYC Local Law 11 Facade Inspection Safety Program., • Certifications (For IL candidates only): City of Chicago scaffold safety training certification or ability to obtain within 6 months of start., • Communication Skills: Excellent written and verbal communication skills. (Be willing to provide examples within the interview process), • Analytical Skills: Strong background in first principles of structural engineering and mechanics. Proficient with engineering tools for structural evaluation and analysis., • Project Management: Experience managing budgets and schedules, and leading projects., • Business Development: Experience with client engagement and presenting technical issues to Clients. Experience assisting with proposal writing. Physical and Travel Demands • Position may require some work to be completed in a field or laboratory environment, including work from heights or in confined spaces., • Enjoy up to 30% of the time in the field on assessments of building envelopes or structural system existing conditions., • Up to 20% travel may be required at times for this position. Who we are: We are CTLGroup, a team of engineers, architects, scientists, and consultants who are seasoned technical experts possessing unparalleled experience, knowledge, and testing proficiency in structures and materials. Our integrated team is backed by one of the most sophisticated commercial structural and building materials laboratories in the United States. Whether providing technical consultation, conducting laboratory studies, performing failure investigations, or offering expert testimony, we aim to solve our clients' problems and assist in achieving their objectives. Beyond delivering mere data, our team provides a foundation of confidence upon which our clients can build. *This job description describes the general nature of the position. The above declarations are not intended to be a complete list of responsibilities, skills and abilities required to do the job.CTLGroup provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionVRX, Inc. offers proactive, big-picture thinking and planning, as well as detailed program, project, and asset management. Established in 2006 by longtime construction engineer Noelle Ibrahim, PE, VRX is a woman-owned professional services firm certified as a WBE and HUB. We provide turnkey services to the public and private sectors. Our specialties include client-focused program and asset management; construction management and inspection; civil engineering; bridge and structural design; utility engineering; and comprehensive environmental services. VRX is more than 180 people strong in offices across Texas, in Oklahoma and New York. Learn more at VRXglobal.com Position – Construction Inspector Technical Responsibilities • Prepare reports on project status, problems encountered, and overall results., • Knowledge of construction materials, methods, and procedures, • Inspect material prior to installation and verify appropriate certifications and/or lab reports have been submitted., • Perform material sampling and required testing., • Direct the contractor to rectify all areas of non-compliance regarding safety, maintenance of traffic and maintenance of site., • Strong written and oral communication skillsEducational Requirements and Experience/ Professional Licenses/Registrations, • Experience on projects for NYCDDC, NYSDOT, NYCDOT, PANYNJ, or MTA is plus., • Bachelor's degree (B. S., or B.A.) in Engineering or Construction Management or High School diploma or equivalent with 5 years of experience in construction inspection or NICET II, III or IV Certification in Transportation/Highway and Bridge Construction or equivalent., • A valid driver’s license and personal vehicle to travel to and from project sites for site inspections., • Water Main Inspection Certificate, • OSHA 10-hour certification, • ACI certificationVRX, Inc. is an award-winning woman owned civil engineering firm that has been in business since 2006. We offer a comprehensive benefit package including Health, Dental, Vision and Life insurance, as well as a Health Saving Account option and a 401k plan with company matching. NOTICE TO THIRD PARTY AGENCIES: Please note that VRX, Inc. does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, VRX, Inc. will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, VRX, Inc. explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of VRX, Inc VRX, Inc. is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.” Powered by JazzHR FkN8BPp3O1

AG Consulting Engineering, PC (AG) a design, engineering and construction management firm headquartered in Manhattan is looking for several Civil Inspectors with NYC Environmental Protection (DEP) experience. POSITION: DEP Civil Inspector LOCATION: Brooklyn PROJECT: DEP Infrastructure SCOPE: This pr

Job Description Quality Inspector - Hudson Tunnel Project | New York / New Jersey About the Company & Project Our client is a leading global construction consultancy renowned for delivering high-profile, complex, iconic, large-scale capital projects. We are currently seeking a dedicated and accomplished Quality Inspector for the Hudson Tunnel Project (HTP). This is a once in a lifetime opportunity to contribute to this landmark project that is poised to deliver transformative impacts across economic, transportation, and environmental sustainability. The busiest rail connection between New York, New Jersey, and the Northeast Corridor, the Hudson Tunnel Project will improve capacity, reliability, and resiliency of commuter and intercity rail transit serving 800,000 daily passengers from Washington, D.C. to New York and New England. This is a milestone project that is slated to receive nearly $12 billion in federal funding, the largest investment in a mass transit project in modern history. As the Quality Inspector, you'll play a pivotal role in the delivery of this significant project. This is a fantastic opportunity to be part of a mission that aligns with our clients purpose: to create responsible places that bring transformative impact to their people, communities, and societies. Responsibilities • Perform site inspections to assess construction methods, materials, and workmanship for alignment with project specifications and regulatory standards., • Assist in executing and monitoring the Quality Management Plan, ensuring procedures are properly followed throughout the project lifecycle., • Conduct audits of contractors and subcontractors to confirm compliance with defined quality protocols and package-specific requirements., • Review contractor testing and inspection plans, evaluate test results, and maintain accurate testing logs., • Provide feedback on quality documentation and support project management with actionable recommendations., • Maintain organized records of inspections, testing, acceptance activities, and punch list items., • Document nonconforming work, track corrective actions, and monitor resolution of quality issues., • Coordinate and oversee materials testing, including off-site lab work by independent organizations., • Collaborate with engineers, contractors, and stakeholders to resolve quality concerns and drive continuous improvement., • Bachelors degree in civil engineering, construction management, or a related discipline (preferred)., • Minimum 3 years of experience in quality assurance, inspection, or construction management on large infrastructure or transportation projects., • Familiarity with federally funded projects and regulatory compliance is an asset., • Solid understanding of construction practices, materials testing, and quality control procedures., • Experience with document control systems and quality management frameworks., • Proficient in Microsoft Office and basic project management tools., • Strong organizational skills and attention to detail, with the ability to work collaboratively across teams., • Comfortable working in field environments and adapting to evolving project demands. Platinum Global Talent Solutions is committed to providing equal employment opportunities to all qualified individuals. We refer candidates based on their qualifications and experience, without regard to race, color, religion, national origin, sex, age, disability, veteran status, or any other legally protected status. Why this is a Great Opportunity • Full-time position with competitive compensation, • Opportunity to work in a client-facing role delivering significant and impactful capital projects., • Collaborative and supportive work environment with the opportunity for growth in your career, • Comprehensive benefits package including medical, dental, vision, life insurance, accidental death and dismemberment, disability Insurance, 401(k).

AG Consulting Engineering, PC (AG) a design, engineering and construction management firm headquartered in Manhattan is looking for several Mechanical Inspectors with NYC Environmental Protection (DEP) experience. POSITION: DEP Mechanical Inspector LOCATION: Brooklyn PROJECT: DEP Infrastructure SCOP

Job Description JOB TITLE: Room Inspector REPORTS TO: Executive Housekeeper SUPERVISES DIRECTLY: Room attendants, House-persons, Laundry personnel Purpose for the Position: To support the housekeeping and laundry departments manage all facets of the Housekeeping Department in the absence of the Executive Housekeeper, ensuring high levels of cleanliness, guest service and satisfaction throughout the hotel. This includes guestrooms, hallways, lobbies, public areas, rest areas, laundry, storage and work areas. Essential Responsibilities: • Maintains cleanliness quality based on hotel objectives., • Inspects, monitors, and maintains level of cleanliness in all assigned guest rooms. Reports all unsatisfactory conditions to the room attendant assigned and takes personal responsibility to ensure that actions are taken to remedy any substandard cleanliness or maintenance related conditions in each guestroom., • Assumes responsibility for the guest feedback and guest service scores in all departmental related indices., • Inspects monitors and maintains level of cleanliness in event areas, storage areas, restrooms and public areas and offices., • Compiles and reports accurate status of all guestrooms to the front desk department., • Works with the Security Office to enforce standard procedures for the acceptance, security and return on guest lost and found items., • At the direction of the executive housekeeper, conducts formal inventories of linen, supplies and equipment as required., • At the direction of the executive housekeeper participates in the ordering of supplies so as to maintain adequate inventory levels., • Checks all vacant rooms and spaces, public spaces, storage areas and rest areas each day., • Maintains departmental key control., • Maintains deep cleaning program., • Read and interpret business records and statistical reports., • Analyze and interpret established policies., • Make business decisions based on production reports and similar facts as well as on your own experience and personal opinions., • Deal with the general public, customers, associates, union and government officials with tact and courtesy., • Plan and organize the work of others., • Change activity frequently and cope with interruptions., • Speak and write clearly., • Accept full responsibility for managing and activity. Environmental Conditions: Inside: Protection from weather conditions but not necessarily from temperature changes. A job is considered “inside” if the worker spends approximately 75% or more of the time inside. Math Skills: Requires mathematical development sufficient to be able to: Deal with system of real numbers; algebraic solution of equations and probability and statistical inference. Apply fractions, percentages, ratio and proportion. Language Skills: Must have developed language skills to the point to be able to: Read newspapers, periodicals, journals and manuals. Write business letters, summaries and reports using prescribed format, and conforming to all rules of punctuation, grammar, diction and style. Participate in discussions and debates. Speak extemporaneously on a variety of subjects. Relationships to Data, People and Things: Data: Coordinating: Determining time, place and sequence of operations or action to be taken on the basis of analysis of data; executing determination and/or reporting on events. People: Speaking-Signaling: Talking with and/or signaling people to convey or exchange information, including giving assignments and/or directions to helpers or assistants. Things: Handling: Using body members, hand tools, and/or special devices to work, move, or carry objects or materials. Involves little or no latitude for judgment With regard to attainment of standards or in selecting appropriate tools, objects or materials. Specific Vocational Preparation: Specific vocational training includes an occupationally significant combination of: vocational education, apprentice training, in-plant training, on-the-job training, or essential experience in less responsible jobs which lead to the higher job or serving in other jobs, over 1 year up to and including 2 years. An Associates or Bachelor degree or higher education preferred.

Job Description JOB TITLE: Room Inspector REPORTS TO: Executive Housekeeper SUPERVISES DIRECTLY: Room attendants, House-persons, Laundry personnel Purpose for the Position: To support the housekeeping and laundry departments manage all facets of the Housekeeping Department in the absence of the Executive Housekeeper, ensuring high levels of cleanliness, guest service and satisfaction throughout the hotel. This includes guestrooms, hallways, lobbies, public areas, rest areas, laundry, storage and work areas. Essential Responsibilities: • Maintains cleanliness quality based on hotel objectives., • Inspects, monitors, and maintains level of cleanliness in all assigned guest rooms. Reports all unsatisfactory conditions to the room attendant assigned and takes personal responsibility to ensure that actions are taken to remedy any substandard cleanliness or maintenance related conditions in each guestroom., • Assumes responsibility for the guest feedback and guest service scores in all departmental related indices., • Inspects monitors and maintains level of cleanliness in event areas, storage areas, restrooms and public areas and offices., • Compiles and reports accurate status of all guestrooms to the front desk department., • Works with the Security Office to enforce standard procedures for the acceptance, security and return on guest lost and found items., • At the direction of the executive housekeeper, conducts formal inventories of linen, supplies and equipment as required., • At the direction of the executive housekeeper participates in the ordering of supplies so as to maintain adequate inventory levels., • Checks all vacant rooms and spaces, public spaces, storage areas and rest areas each day., • Maintains departmental key control., • Maintains deep cleaning program., • Read and interpret business records and statistical reports., • Analyze and interpret established policies., • Make business decisions based on production reports and similar facts as well as on your own experience and personal opinions., • Deal with the general public, customers, associates, union and government officials with tact and courtesy., • Plan and organize the work of others., • Change activity frequently and cope with interruptions., • Speak and write clearly., • Accept full responsibility for managing and activity. Environmental Conditions: Inside: Protection from weather conditions but not necessarily from temperature changes. A job is considered “inside” if the worker spends approximately 75% or more of the time inside. Math Skills: Requires mathematical development sufficient to be able to: Deal with system of real numbers; algebraic solution of equations and probability and statistical inference. Apply fractions, percentages, ratio and proportion. Language Skills: Must have developed language skills to the point to be able to: Read newspapers, periodicals, journals and manuals. Write business letters, summaries and reports using prescribed format, and conforming to all rules of punctuation, grammar, diction and style. Participate in discussions and debates. Speak extemporaneously on a variety of subjects. Relationships to Data, People and Things: Data: Coordinating: Determining time, place and sequence of operations or action to be taken on the basis of analysis of data; executing determination and/or reporting on events. People: Speaking-Signaling: Talking with and/or signaling people to convey or exchange information, including giving assignments and/or directions to helpers or assistants. Things: Handling: Using body members, hand tools, and/or special devices to work, move, or carry objects or materials. Involves little or no latitude for judgment With regard to attainment of standards or in selecting appropriate tools, objects or materials. Specific Vocational Preparation: Specific vocational training includes an occupationally significant combination of: vocational education, apprentice training, in-plant training, on-the-job training, or essential experience in less responsible jobs which lead to the higher job or serving in other jobs, over 1 year up to and including 2 years. An Associates or Bachelor degree or higher education preferred.

AG Consulting Engineering, PC (AG) a design, engineering and construction management firm headquartered in Manhattan is looking for several Electrical Inspectors with NYC Environmental Protection (DEP) experience. POSITION: DEP Electrical Inspector LOCATION: Brooklyn PROJECT: DEP Infrastructure SCOPE: This project includes upgrades at the Paerdegat and Avenue U Pumping Stations to provide reliable, efficient, resilient, sustainable and low maintenance operation in accordance with DEP’s Wastewater Pumping Station Design Guidelines. DEP is responsible for the operation of New York City’s Collection Facilities, which include over 95 Pumping Stations. The failure of Pumping Stations within the wastewater conveyance system can cause the spill of raw sewage into nearby receiving waters. Other potential problems associated with a Pumping Station failure can include: flooding of highway or local streets; flood damage to private property; beach closings; water quality violations; and odors. Because of the potential failures, it is critical that DEP’s Pumping Stations be maintained in a state of good repair REQUIREMENTS – Electrical Inspector is responsible for examining the contractor’s work to ensure the work is being performed in accordance with the contract and shop drawings. The inspector shall prepare daily inspection reports that summarizes contractor staffing, work activities, and production levels sufficient to allow for payment. The inspector must review and maintain T&M records as needed. Ability to communicate effectively, both orally and written. Ability to read and interpret plans and specifications and prepare written daily narratives (work reports), special inspection reports, daily time and material records. Identify potential extra work issues and keep Resident Engineer advised of issues. -Bachelor’s Degree in Electrical Engineering preferred. - Minimum five years of experience inspecting construction work. -Trained in minimum OSHA 30-hour construction safety. A.G. Consulting Engineering, P.C. offers salary commensurate with experience, a comprehensive benefits package which includes medical, dental, PTO days, holidays, disability insurance, life insurance, 401K plan, tuition reimbursement, and more. AG is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law.

AG Consulting Engineering, PC (AG) a design, engineering and construction management firm headquartered in Manhattan is looking for several Civil Inspectors with NYC Environmental Protection (DEP) experience. POSITION: DEP Civil Inspector LOCATION: Brooklyn PROJECT: DEP Infrastructure SCOPE: This project includes upgrades at the Paerdegat and Avenue U Pumping Stations to provide reliable, efficient, resilient, sustainable and low maintenance operation in accordance with DEP’s Wastewater Pumping Station Design Guidelines. DEP is responsible for the operation of New York City’s Collection Facilities, which include over 95 Pumping Stations. The failure of Pumping Stations within the wastewater conveyance system can cause the spill of raw sewage into nearby receiving waters. Other potential problems associated with a Pumping Station failure can include: flooding of highway or local streets; flood damage to private property; beach closings; water quality violations; and odors. Because of the potential failures, it is critical that DEP’s Pumping Stations be maintained in a state of good repair REQUIREMENTS – Civil Inspector is responsible for examining the contractor’s work to ensure the work is being performed in accordance with the contract and shop drawings. The inspector shall prepare daily inspection reports that summarizes contractor staffing, work activities, and production levels sufficient to allow for payment. The inspector must review and maintain T&M records as needed. Ability to communicate effectively, both orally and written. Ability to read and interpret plans and specifications and prepare written daily narratives (work reports), special inspection reports, daily time and material records. Identify potential extra work issues and keep Resident Engineer advised of issues. -Bachelor’s Degree in Electrical Engineering preferred. - Minimum five years of experience inspecting construction work. -Trained in minimum OSHA 30-hour construction safety. A.G. Consulting Engineering, P.C. offers salary commensurate with experience, a comprehensive benefits package which includes medical, dental, PTO days, holidays, disability insurance, life insurance, 401K plan, tuition reimbursement, and more. AG is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law.

Job Description • Certification & Licensing, • Must hold a valid NYC Asbestos Investigator Certificate issued by the NYC Department of Environmental Protection (DEP)., • Must hold a valid New York State Asbestos Inspector Certificate issued by the NYS Department of Labor (DOL)., • Education & Experience, • High school diploma or equivalent (required); associate or bachelor’s degree in environmental science, or related field preferred., • Prior asbestos inspection or environmental health & safety (EHS) experience strongly preferred., • Knowledge & Skills, • Knowledge of federal, state, and local asbestos regulations (EPA, OSHA, NYS DOL, NYC DEP)., • Ability to conduct building inspections, collect bulk samples, and complete ACP-5 forms., • Strong documentation and report-writing skills; must be able to maintain accurate inspection records., • Familiarity with building materials, construction methods, and asbestos-containing material identification., • Strong attention to detail and ability to work independently in the field., • Physical Requirements, • Ability to climb ladders, access tight spaces, and carry inspection equipment., • Ability to wear personal protective equipment (PPE), including respirators, as required., • Other Requirements, • Willingness to work flexible hours, including evenings or weekends, depending on project needs., • Professional communication skills for interaction with clients, contractors, and regulatory agencies., • Basic computer proficiency, including email, document management, and standard office software. Job Description Our established (35+ years in business) North Jersey/New York environmental consulting firm has an opening for an Asbestos Investigator / Inspector. This position works under the supervision of a Senior Project Manager and involves working in a team environment with Project Design, Scheduling, Accounting, Sales, and other company groups. While the primary focus of this position is expected to be NYC Asbestos projects, there is also the opportunity to expand into other geographic areas such as NJ and Westchester/Rockland/LI. This diversity provides multiple opportunities for our staff to expand their environmental careers and obtain additional licenses/certifications. Benefits ❖ Medical/dental/vision insurance ❖ Disability insurance (long term) ❖ Paid holidays ❖ 401K matching retirement account and profit sharing plans ❖ Travel expense re-imbursement and/or car allowance Company DescriptionAbout us Omega Environmental Services, Inc. was founded in 1989 when the key personnel of a “Fortune-500′′ company’s environmental engineering division founded their own company. The culture of the new organization is based on providing superior customer service, rapid response, and “turn-key” environmental health & safety services. Our company policy is to earn our client’s trust and respect by providing exceptional client service and consistently high-quality work. This policy has enabled Omega to work with “Fortune-500′′ companies, health care institutions, and insurance companies on their environmental health & safety projects. In addition to asbestos and lead programs, Omega specializes in OSHA compliance programs, health and safety programs, indoor air quality assessments, and Phase I and II environmental site assessments. We have also been leaders in the industry in microbial consulting, remediation design & oversight. Working with healthcare institutions and hospitals, infection control departments often call us to perform outside quality control or assist in preparation for Joint Commission on Accreditation of Healthcare Organizations (JC) inspections. At Omega, we are sensitive that our client’s financial resources available to address environmental and health, and safety issues may be limited. Yet the reduction of environmental liability is also critical. At Omega, both cost minimization and limiting environmental exposure are incorporated into our project design criteria. Since opening, Omega has experienced a health & controlled growth rate of nearly 20% per year, and our professional staff members have diverse backgrounds covering the following disciplines: Environmental Engineering, Industrial Hygiene, Ventilation, Toxicology, Risk Assessment, Air Pollution, Safety, and Environmental Law. Our field staff consists of professionals with undergraduate and advanced degrees and years of experience working with the public and private sectors on environmental projects. Over 80% of our work comes from referrals and repeat business. We have found success by focusing on the needs of our customers without compromising quality or liability-related issues.About us\r\n\r\nOmega Environmental Services, Inc. was founded in 1989 when the key personnel of a “Fortune-500′′ company’s environmental engineering division founded their own company. The culture of the new organization is based on providing superior customer service, rapid response, and “turn-key” environmental health & safety services. Our company policy is to earn our client’s trust and respect by providing exceptional client service and consistently high-quality work.\r\n\r\nThis policy has enabled Omega to work with “Fortune-500′′ companies, health care institutions, and insurance companies on their environmental health & safety projects. In addition to asbestos and lead programs, Omega specializes in OSHA compliance programs, health and safety programs, indoor air quality assessments, and Phase I and II environmental site assessments. We have also been leaders in the industry in microbial consulting, remediation design & oversight. Working with healthcare institutions and hospitals, infection control departments often call us to perform outside quality control or assist in preparation for Joint Commission on Accreditation of Healthcare Organizations (JC) inspections.\r\n\r\nAt Omega, we are sensitive that our client’s financial resources available to address environmental and health, and safety issues may be limited. Yet the reduction of environmental liability is also critical. At Omega, both cost minimization and limiting environmental exposure are incorporated into our project design criteria.\r\n\r\nSince opening, Omega has experienced a health & controlled growth rate of nearly 20% per year, and our professional staff members have diverse backgrounds covering the following disciplines: Environmental Engineering, Industrial Hygiene, Ventilation, Toxicology, Risk Assessment, Air Pollution, Safety, and Environmental Law. Our field staff consists of professionals with undergraduate and advanced degrees and years of experience working with the public and private sectors on environmental projects. Over 80% of our work comes from referrals and repeat business. We have found success by focusing on the needs of our customers without compromising quality or liability-related issues.

Job Description AIM Environmental LLC is seeking candidates possessing experience in conducting building surveys/inspections for asbestos, lead-based paint and mold. We are potentially looking to hire multiple people for this position including more entry level candidates with minimal licensing/certifications and fundamental building survey experience, as well as more experienced candidates possessing extensive experience and certifications in the industry. Responsibilities will include: • Reviewing project specifications and drawings, • Conducting site surveys, • Collecting bulk samples · 1-3 years experience in conducting hazardous building material surveys · NYSDOL Asbestos Inspector License · NYCDEP Asbestos Investigator (preferred) · USEPA Lead-Based Paint Inspector/Risk Assessor (preferred) · NYSDOL Mold Assessor (preferred) · Experience with AutoCAD drafting software (preferred) · Adept with MS Office and Adobe Acrobat · Strong organizational and interpersonal skills · High school diploma · AS or BS in industrial hygiene, environmental science or related science/engineering fields (preferred)

Job Description Nissan of the Bronx is looking for smart, engaging, creative and dynamic people who want to join a team where they matter. We are committed to an environment where the customer is always treated with respect and dignity. Our associates are our most valuable resource and growth is encouraged through diligence, teamwork & creativity. Above all, there is the highest standard of honesty and integrity when conducting business. Your professional development is one of our top priorities, we're proud to offer our staff members a comprehensive benefits package, competitive compensation plans, and abounding avenues to grow your career with us. If you have an interest in automotive, and a desire to develop a career in the industry, apply today! Responsibilities • Checks all fluids and maintenance-related parts and tops-off or replaces fluids or filters/parts as required, • Diagnoses issues based on experience, analysis, and testing, • Follows all shop policy, procedure, safety, and environmental rules, • Makes repair recommendations and manages delivery of repairs by setting and managing customer expectations, • Performs routine service inspections or tests and completes standard maintenance jobs, • Repairs automobiles and light trucks as assigned, • Attends all staff meetings, training, and educational classes as required, • Complies with and enforces all safety policies and procedures, • Follows all safety and security procedures, • High school diploma or GED preferred, • At least one year of relevant experience, • ASE certifications, • Certification as a state inspector a plus, • Unrestricted driver's license and clean driving record, • Neat, clean, and professional appearance, • Able to safely operate motor vehicles in tight and small spaces, • Broad scope of automotive mechanical/electrical knowledge, • Must be reliable and able to follow directions, • Helpful attitude and friendly demeanor, • Must have a valid and clean NY state driver’s license, • Dental insurance, • Disability insurance, • Health insurance, • Paid time off, • Paid training, • Vision insurance, • 8 hour shift, • 5 day work week, • Flat tech guaranteed weekly, • Automotive Service Technician: 1 year (Required) We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Nissan of the Bronx is looking for smart, engaging, creative and dynamic people who want to join a team where they matter. We are committed to an environment where the customer is always treated with respect and dignity. Our associates are our most valuable resource and growth is encouraged through diligence, teamwork & creativity. Above all, there is the highest standard of honesty and integrity when conducting business. Your professional development is one of our top priorities, we're proud to offer our staff members a comprehensive benefits package, competitive compensation plans, and abounding avenues to grow your career with us. If you have an interest in automotive, and a desire to develop a career in the industry, apply today! Responsibilities • Checks all fluids and maintenance-related parts and tops-off or replaces fluids or filters/parts as required, • Diagnoses issues based on experience, analysis, and testing, • Follows all shop policy, procedure, safety, and environmental rules, • Makes repair recommendations and manages delivery of repairs by setting and managing customer expectations, • Performs routine service inspections or tests and completes standard maintenance jobs, • Repairs automobiles and light trucks as assigned, • Attends all staff meetings, trainings, and educational classes as required, • Complies with and enforces all safety policies and procedures, • Follows all safety and security procedures, • High school diploma or GED preferred, • At least one year of relevant experience, • ASE certifications, • Certification as a state inspector a plus, • Unrestricted driver's license and clean driving record, • Neat, clean, and professional appearance, • Able to safely operate motor vehicles in tight and small spaces, • Broad scope of automotive mechanical/electrical knowledge, • Must be reliable and able to follow directions, • Helpful attitude and friendly demeanor, • Must have a valid and clean NY state driver’s license, • Dental insurance, • Disability insurance, • Health insurance, • Paid time off, • Paid training, • Vision insurance, • 10 hour shift, • 8 hour shift, • Monday to Friday, • Automotive Service Technician: 1 year (Required) We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Are you highly motivated, hard-working, and seeking to join a growth-focused consulting & engineering firm? Are you looking for a company that will invest in your development and grow your professional skills? If so, consider a career with Apex! Powered by record sales, extraordinary client retention, strategic acquisitions, and an entrepreneurial spirit, Apex Companies is one of the fastest growing engineering and environmental consulting firms in the US. We were recently recognized by the Zweig Group as one of the fastest growing firms in the AEC industry. We take pride in providing our clients with exceptional service and have earned numerous awards for project excellence. We continue to grow, and we want you to grow with us. Position: Certified Asbestos Investigator Industry: Science Technical Location: Iselin, NJ/ New York, NY Your Responsibilities as an Industrial Hygiene Professional: • Conducting building inspections and investigations for asbestos and asbestos related hazards., • Provide asbestos abatement monitoring and air testing, • Issuing detail reports in regards to all asbestos related activities on assigned projects., • Handling a variety of tasks including environmental investigations and assessments including regulatory compliance, asbestos and lead paint inspections and remediation oversight, • Field monitoring of abatement projects in accordance with applicable federal, state and local regulations, • Technical support and report writing What we're looking for: • BS in Industrial Hygiene, Environmental Science, or other related field, • 5-10 years experience managing projects and report writing., • NYC Department of Environmental Protection (DEP) Asbestos Investigator Certification., • NYS DOL Licensed Asbestos Inspector Certification., • Must have strong knowledge of NYC rules and regulations as well as NYS,, • Ability to comprehend/review construction drawings, knowledge of building components, • Working knowledge of Excel/Word, • Strong technical writing skills, the ability to successfully multi-task, safety awareness, and a good record and understanding of safe work practices, • 40-hour HAZWOPER certification preferred, • Valid driver's license & good driving record are required., • Company-subsidized medical and dental, • Company-paid life, short, and long-term disability, • 401k match, tuition assistance, and more, • Cross-training and the ability to work on a variety of projects, • Performance-based bonuses or other incentives, • Working with the best and brightest in the industry, • 1,800+ employee national firm with 50+ locations across the US Apex Job Title: Scientist 2 Req ID: 10824 Annual Expected Pay Range$80,000—$100,000 USD We believe in equality for all and celebrate the diversity and differences of our employees, customers, and communities. We do not discriminate based on gender, race or color, ethnicity or national origin, age, disability, religion, sexual orientation, gender identity or expression, veteran status, or any other applicable characteristics protected by law. Apex aims to make apexcos.com accessible to all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, please contact or (301) 417-0200. Likewise, feel free to reach out to us if you would like to view or discuss Apex policy related to equal employment opportunity or have any related concerns. EO/AA/VEV/Disabled Employer TO ALL RECRUITMENT AGENCIES: Apex Companies does not accept unsolicited agency resumes. Please do not forward resumes for any of our job postings to our career's sites, or to any employees of Apex Companies or affiliates. Apex Companies is not responsible for any fees related to unsolicited resumes.