Failure analysis jobs in Houston, Texas - Page 2Create job alerts

Job DescriptionPurpose of the position Supplier management & issue handling & customer service Duties and Responsibilities：： • Supplier Development & Qualification, • Conduct supplier audits and assessments to ensure compliance with quality standards, • Develop and maintain supplier quality agreements to align with regulatory and corporate requirements, • Quality Issue Resolution & Corrective Actions, • Investigate supplier-related defects using structured problem-solving methods (8D, 5Why, CAPA), • Drive root cause analysis and verify corrective/preventive actions to prevent recurrenc, • Manage non-conformance reports (NCRs) and ensure timely supplier response, • Supplier Performance Monitoring & Improvement, • Define and track supplier Key Performance Indicators (KPIs) such as PPM (Parts Per Million), defect rates, and on-time delivery, • Conduct periodic supplier scorecard reviews and implement improvement plans, • Facilitate supplier training on quality standards, statistical process control (SPC), and measurement system analysis (MSA), • Quality System & Process Compliance, • Ensure suppliers adhere to APQP (Advanced Product Quality Planning), PPAP (Production Part Approval Process), and FMEA (Failure Mode and Effects Analysis), • Validate supplier manufacturing processes (e.g., GR&R, DOE, process capability studies), • Support internal and external audits (e.g., ISO, customer-specific requirements), • Cross-functional Collaboration & Customer Support, • Work with internal teams to align supplier quality with product design (DFM/DFQ) ., • Address customer complaints related to supplier quality and ensure timely resolution ., • Participate in New Product Development phases to mitigate quality risks earlyEducation and work experience, • Bachelor’s degree in Engineering (Mechanical, Electrical, Material, or related field)., • 2+ years of supplier quality experience in consumer electronics manufacturing and product analysis., • Proficiency in quality tools (SPC, FMEA, MSA, Six Sigma), • Strong communication skills for global supplier interactions (fluency in English required; additional languages a plus)Working conditions, • Office-based role, fast-paced work environment, • This position must be able to respond to after-hour emergencies and be available to work non-core hours or overtime to complete various projects without interruption to operations.Skills:, • SQE working experience in SMT/Test/Assembly factory required., • Proficient in reading, writing and speaking English., • Proactive in work and strong resilience., • PMP certificate are preferred. g6PDq0b3jD

Job DescriptionRole and ResponsibilitiesWe are seeking a highly motivated Quality Engineer to join our team. In this role, you will play a key part in ensuring that products, processes, and systems meet the highest quality standards. You will collaborate across engineering, manufacturing, and operations teams to drive continuous improvement and support customer satisfaction. Responsibilities • Ensure products consistently align with customer requirements and specifications., • Monitor workflows, processes, and product quality throughout production., • Respond promptly to customer concerns using structured problem-solving methods (5 Why, 5P, 8D, etc.)., • Develop strategies and action plans to improve Key Performance Indicators (KPIs)., • Document all internal and external defects and implement corrective action plans., • Provide direct support to internal manufacturing operations on quality-related functions., • Drive and support lean manufacturing and continuous improvement initiatives., • Participate in Process Failure Mode and Effects Analysis (PFMEA)., • Oversee and maintain Control Plans and customer-required inspection standards., • Interpret product prints, drawings, and technical specifications accurately., • Convert or revise customer Standard Operating Procedures (SOPs) for internal use., • Support product qualification, reliability testing, and New Product Introduction (NPI)., • Lead Root Cause Analysis (RCA) and Corrective/Preventive Actions (CAPA)., • Prepare and present quality reports, metrics, and documentation for stakeholders., • Maintain a strong presence on the production floor, dedicating at least six (6) hours per day to process and product monitoringQualifications and Education Requirements, • Bachelor’s degree in Engineering, Quality Management, or related field (preferred)., • 2+ years of experience in quality engineering or a related role (manufacturing or electronics industry experience a plus)., • Strong knowledge of quality tools and methodologies (e.g., FMEA, SPC, 8D, Six Sigma)., • Familiarity with ISO 9001, IATF 16949, or other quality standards., • Excellent analytical, problem-solving, and communication skills., • Proficiency in Microsoft Office Suite; experience with statistical or quality software a plus. Powered by JazzHR yvu81j3tT9

Job Description Location: Houston, Texas Position status: Full-Time Exempt Status: Exempt Company Profile: CNPC USA is a subsidiary of China National Petroleum Company and serves as the North American headquarters. Our goal is to provide innovation, research, and development of new technologies for Oil and Gas Exploration and Production. Job Summary: We are seeking a highly skilled and motivated MWD Technology Development Lead to manage development projects supporting next-generation downhole measurement while drilling technologies. This role contributes to the design, analysis, validation, and commercialization of advanced MWD tools and subsystems that must operate reliably in harsh downhole environments, including high temperature, shock, vibration, and pressure conditions. Responsibilities: • Design and implement high-temperature MWD system architecture, ensuring scalability, performance, and durability in extreme downhole environments., • Design, analyze, and validate electronics systems and subsystems for MWD tools and related technologies., • Apply engineering tools and simulation software to evaluate performance, reliability, and environmental survivability of electronics assemblies., • Oversee tool testing and qualification, including lab validation, environmental testing, and reliability assessments, to ensure tool readiness for field deployment., • Support field trials and initial deployments, working closely with field personnel and customers to ensure successful operation and gather performance feedback., • Drive commercialization efforts, ensuring technical readiness and documentation for market release, while supporting product training and customer onboarding., • Maintain close communication with MWD vendors, technology partners, and industry experts to evaluate component sourcing and leverage external capabilities., • Bachelor’s or Master’s degree in Electronics Engineering, Electrical Engineering, Mechanical Engineering, or a related discipline., • Minimum five (5) years of experience in R&D, or product development., • Proven experience in developing or engineering high-temperature MWD or LWD systems, preferably with tools rated above 175°ree;C., • Solid understanding of MWD components and technologies, including sensors, telemetry systems, and downhole electronics., • Experience integrating and validating complex downhole tools through structured testing and qualification processes., • Familiarity with MWD suppliers, component vendors, and manufacturing resources in the oilfield services industry., • Knowledge of drilling operations and rig-site practices; prior field experience is highly desirable., • Strong project leadership, communication, and cross-functional collaboration skills. Preferred Experience: • Experience with commercial MWD platforms and downhole telemetry (mud pulse, EM, etc.)., • Familiarity with downhole vibration, shock, and thermal modeling., • Exposure to tool failure analysis and root-cause investigation in real-world drilling environments. Work Environment: This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets, and fax machines. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential job functions. While performing the duties of this job, the employee is regularly required to talk or hear. This is a sedentary role; however, some filing, bending and the ability to lift 20lbs is required. Travel: This position requires some overnight international and domestic travel. Local travel between other CNPC USA locations and testing facilities is required. Supervisory Responsibility: This position carries limited supervisory responsibilities, primarily focused on technical leadership, mentorship, and work coordination. This position is expected to: • Provide technical direction and guidance to junior and mid-level engineers, particularly in high-temperature MWD/LWD electronics development., • Review and approve technical designs, test plans, and engineering deliverables., • Support task planning, work prioritization, and technical resource coordination within assigned projects., • Contribute to performance feedback, skills development, and technical capability building of team members. CNPC USA is an Equal Opportunity Employer (EOE). Qualified applicants are considered regardless of race, color, age, sex, sexual orientation, religion, disability, ethnicity, national origin, marital status, veteran status, or any other legally protected status. Disclaimer: The job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.

Job Description Empower Your Future: At MetOx International, we're pioneering the next era of energy security and abundance through breakthrough superconducting technology. As a Process Technician, you'll join a dynamic team committed to strengthening the world's energy systems to make them more resilient, efficient, and reliable. Based at our global headquarters in Houston, TX, the Process Technician will partner with engineering and manufacturing teams, drive defect reduction, support scale-up and maintain rigorous line discipline of critical process steps. This multidisciplinary role requires expertise in multiple process tools, metrology, and failure analysis methods. It is a 6-month contract with intent to extend or convert to full-time. Schedule: this is a night shift position. Key Responsibilities Engineering and Operations Support • Material Disposition: Review and flag substrate-tape runs that are experimental or deviate from specifications., • Process Experimentation: Support, execute, and report on DOE‑driven studies in PVD, copper electro‑plating, electropolishing, and CVD to boost capability, control, and yield., • Real-time Troubleshooting: Diagnose and resolve line‑related defects (coating thickness, adhesion, surface roughness) with minimal downtime., • Failure analysis: Execute root‑cause investigations on suspect or experimental tapes using SEM, XRF, ICP-MS, adhesion testing, profilometry, and other relevant instrumentation, • Process Validation/Qualification: Document qualification runs, maintain SOPs, and support change‑control workflows to ensure reproducibility., • Tool Operation: Assist Process engineers to conduct DOE's by preparing material, loading and operating the tools. Minimum Qualifications: • Associate's degree in Engineering, Materials Science, Physics, or a related discipline., • 3 years of process‑technician or process‑engineering experience in a semiconductor‑style or advanced‑materials manufacturing environment. Preferred Qualifications: • Hands‑on experience in developing and sustaining sputter, electro‑plating (including copper), electropolishing, and chemical‑vapor deposition processes in a production setting., • Semiconductor manufacturing background (MEMS, thin‑film, or HTS) is a plus., • Experience in preparing and handling samples for metrology and inspection tools (SEM, XRF, ICP‑MS, adhesion tests, profilometry)., • Familiarity with Six Sigma, SPC, and automation tools., • Ability to produce and maintain validation packages (SOPs, work instructions, change orders). Knowledge, Skills, & Abilities: • Analytical thinking: Strong problem‑solving skills with a data‑driven approach to engineering trials and production metrics., • Process Control expertise: Familiarity with in SPC tools and ability to recognize trends in control‑charts and interpret based on data., • Autonomous Troubleshooting: Capable of diagnosing and correcting line issues with minimal supervision., • Documentation and Quality: Clear, concise communication of results, root‑cause reports, and quality‑first mindset; experienced with regulatory and internal quality systems., • Cross‑functional collaboration: Works effectively with QA/QC, Supply Chain, and Manufacturing Engineering to ensure seamless process integration., • Continuous improvement: Familiar with Lean/Kaizen principles; contributes to cost‑reduction and efficiency initiatives. Physical Demands: This position requires sitting at a desk and viewing a computer screen for extended periods while working or performing other office tasks. Ability to move around the office, including occasional standing, walking, and bending to retrieve documents, attend meetings, or use office equipment. Some light lifting may be required, up to 20 lbs. MetOx is proud to offer competitive benefits including: • Health, dental, and vision available on the first day of employment, • 401(k) match, • Paid parental leave & adoption assistance, • Educational reimbursement, • And more! We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description Path Planning & Sequencing Software Lead - Lunar Terrain Vehicle (NASA LTVS Award Contingent) Houston, Texas OR Glen Burnie MD About Intuitive Machines: Intuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. Our mission is to further science and exploration, communications, and economic progress from the Earth to the Moon and beyond. With the first commercial lunar landing in history, multiple NASA lunar missions in development, and additional private missions on our manifest, we pride ourselves in supporting our customers and the nation in paving the way to return humans to the surface of the Moon. Our world-class team includes experts in all aspects of spacecraft subsystems design, development, and test, on-orbit operations, and safety. *Employment in this role is contingent upon NASA selecting Intuitive Machines as the winner of the LTVS program, scheduled for announcement later in 2025. About The Role: (This role is posted at multiple levels, from entry to technical lead, with multiple openings) Lead a small team in the development and certification of the LTV onboard path planning and sequencing software, responsible for assessing safe driving paths to reach waypoints and executing complex self-driving sequences. Responsibilities • Proactively identify and document requirements for the vehicle path planning and sequencing software, • Architect and decompose the software solution for path planning and sequencing, • Coordinate the testing and certification of the system, • Comfortable developing software in a high-reliability environment, compliant to NASA standards NPR 7150.2D and NASA-STD-8739.8B and NASA CBCS requirements (e.g. SSP 50038), • Represent path planning and sequencing software at NASA safety panels, • Supervise several internal employees and contractors Qualifications • Experience in path planning algorithms, state machine design, and dynamic vehicle stability analysis, • Path planning algorithms: Hybrid A*, D*, and modern approaches, • State Machine Design: Coordinating vehicle movement sequences and command authority, • Dynamic Vehicle Stability Analysis: Verifying the output of static path planning algorithms and identifying safe speeds of travel to maintain stable vehicle control, • Failure Detection, Isolation, and Response (FDIR) logic for all-of-the-above, • Experience in verification by simulation for complex self-driving systems, • Development and maintenance of high-quality design and testing documentation, • C or C ++ (required), • Python or other modeling/analysis languages (nice-to-have), • Familiar with FPGA, GPU, and NPU hardware acceleration techniques for algorithms and able to coordinate with hardware acceleration engineers to implement and validate algorithms Intuitive Machines is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Job Description Title: Electrical Maintenance & Reliability Engineer Location: Pasadena, TX Who we are: Voted one of the Nation's Best and Brightest Companies to Work for, Kuraray America, Inc. (KAI) is a global leader in specialty chemical, fiber, and resin production. With top-of-the-line research and production facilities and a vast network of supplies from around the world, Kuraray leads the industry in specialty dental, fiber, resin, and elastomer products. Kuraray America is a wholly owned subsidiary of Kuraray Company, Ltd. Based in Tokyo, Japan. Kuraray has operations in 32 countries and employs more than 11,000 employees, including over 800 in the United States. Why Kuraray: Kuraray is building a better tomorrow, today. Our team members are dedicated to expanding our business with committed professionals who share essential values such as integrity, excellence, teamwork, and accountability. As a part of Kuraray America, Inc., our team shares the advantages of working for the leader in specialty chemicals, resins, and fibers. Our international presence and resources allow us to be a world-leading innovator in the industries we service. Yet, despite our size, our people are more than just a number. As a new team member, you can expect to earn responsibility quickly. Our commitment to our people is visible in our comprehensive benefits package. As a Kuraray team member, you will have the opportunity to enjoy competitive salaries and benefits, incentive opportunities, and an excellent work environment. Position Summary: The Electrical Maintenance & Reliability Engineer is responsible for maintaining, troubleshooting, and improving the plant's electrical, instrumentation, and process control systems to ensure safe, reliable, and efficient operation. This role provides hands-on technical support, leads equipment reliability initiatives, and partners with Operations, Maintenance, and Project teams to minimize downtime, extend equipment life, and drive continuous improvement. Responsibilities: Maintenance & Troubleshooting • Provide day-to-day technical support to resolve electrical, instrumentation, and control system issues impacting plant operations., • Troubleshoot failures involving motors, drives, MCCs, transformers, sensors, and control systems., • Lead root cause failure analysis (RCFA) and implement corrective/preventive actions., • Develop and optimize preventive and predictive maintenance programs for electrical and instrumentation assets., • Design, specify, and oversee installation or upgrades of electrical and instrumentation systems including control valves, transmitters, analyzers, interlocks, 480VAC starters, 120VAC/24VDC circuits, and VFDs., • Review and update I&E drawings, specifications, and single-line diagrams., • Manage contractors for electrical and instrumentation projects; ensure work meets codes, standards, and plant specifications., • Provide first-level troubleshooting and maintenance of DCS systems and related field instrumentation., • Configure and maintain control loops, interlocks, signal inputs/outputs, and communication protocols (Foundation Fieldbus, Profibus, Modbus, wireless)., • Coordinate system updates, backups, and minor modifications to improve process reliability and operability., • Analyze equipment performance data to identify reliability risks and develop improvement plans., • Apply reliability tools such as FMEA, RCM, and life-cycle analysis to optimize asset performance., • Support capital projects by providing technical input to design, commissioning, and maintenance readiness., • Act as the primary technical advisor and functional lead for all I&E personnel in Maintenance., • Collaborate with Operations to improve safety, yield, and overall plant performance., • Support Process Safety Management (PSM) initiatives including MOC, PHA participation, and incident investigations., • B.S. in Electrical, Instrumentation, or Chemical Engineering, • Minimum 5 years of instrumentation and electrical maintenance experience in a chemical, refining, or industrial manufacturing environment., • Working knowledge of Yokogawa DCS (other platforms such as DeltaV, Honeywell, or ABB a plus).., • Knowledge of discreet, continuous, and sequential control, loop tuning, adaptive control, and feed-forward control modeling., • Proven ability to diagnose, troubleshoot, and resolve equipment and process issues., • Familiarity with key PSM elements including Process Hazards Analysis, Process Technology, Management of Change, and RAGAGEP., • Demonstrated ability to lead, mentor, and coach team members in a collaborative environment., • Strong project management skills with the ability to prioritize and manage multiple complex, time-sensitive projects., • Excellent technical writing, interpersonal, and communication skills., • Self-motivated with initiative and the ability to work independently., • Proficient in Microsoft Office (Word, Excel, PowerPoint). Competencies: • Customer Focus, • Building strong customer relationships and delivering customer-centric solutions., • Business Insight, • Applying knowledge of business and the marketplace to advance the organization's goals., • Cultivates Innovation, • Creating new and better ways for the organization to be successful., • Action Oriented, • Taking on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm., • Ensures Accountability, • Holding self and others accountable to meet commitments., • Drives Results, • Consistently achieving results, even under tough circumstance, • Collaborates, • Building partnerships and working collaboratively with others to meet shared objectives., • Values Difference, • Recognizing the value that different perspectives and cultures bring to an organization, • Communicates Effectively, • Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences., • Courage, • Stepping up to address difficult issues, saying what needs to be said., • Instills Trust, • Gaining the confidence and trust of others through honesty, integrity, and authenticity., • Situational Adaptability, • Adapting approach and demeanor in real time to match the shifting demands of different situations. We offer a competitive compensation package that includes base pay and an annual incentive. This program is designed to reward individual performance and align overall rewards with corporate and team performance. Our employees benefit from a robust healthcare package that includes wellness reimbursements, along with generous perks such as three weeks of paid time off, ten company holidays, paid parental leave, education reimbursement, and a matching 401k plan, among other offerings. Applicants must be authorized to work for ANY employer in the U.S. Learn more at kuraray.us.com/careers/ Kuraray America, Inc. is an Equal Employment Opportunity/disability/protected veteran status No third-party candidates accepted. Job Posted by ApplicantPro

Job DescriptionStress Analyst - Lunar Terrain Vehicle (NASA LTVS Award Contingent)Houston, Texas 77059 About Intuitive Machines: Intuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. Our mission is to further science and exploration, communications, and economic progress from the Earth to the Moon and beyond. With the first commercial lunar landing in history, multiple NASA lunar missions in development, and additional private missions on our manifest, we pride ourselves in supporting our customers and the nation in paving the way to return humans to the surface of the Moon. Our world-class team includes experts in all aspects of spacecraft subsystems design, development, and test, on-orbit operations, and safety. Intuitive Machines is seeking a skilled and experienced Stress Analyst/Engineer to join our dynamic team. As a Stress Engineer you will work in a cross-functional team on the analysis, development, manufacture, test, and on-orbit operation of flight and ground support hardware. *Employment in this role is contingent upon NASA selecting Intuitive Machines as the winner of the LTVS program, scheduled for announcement later in 2025. Responsibilities: • Perform detailed stress analysis and finite element analysis (FEA) to assess the structural integrity and performance of aerospace components and systems., • Support the analysis of Carbon Fiber Structural panels and joints, and metallic secondary structure., • Analyze flight and ground loads to determine the effects on vehicle structures and subsystems, and provide recommendations for load mitigation and optimization., • Evaluate material properties and compatibility for use in aerospace applications, considering factors such as strength, weight, and thermal characteristics., • Verify the structural integrity of vehicle designs through analysis, testing, and simulation, identifying potential failure modes and proposing design modifications as needed., • Identify and assess potential risks associated with structural design and performance, and develop risk mitigation strategies to ensure mission success., • Prepare comprehensive engineering reports, documentation, and technical presentations to communicate analysis results, findings, and recommendations to internal stakeholders and customers., • Collaborate with cross-functional teams, including design engineers, systems engineers, and manufacturing engineers, to ensure alignment and integration of structural requirements throughout the product development lifecycle. Qualifications: (This position is open to multiple levels of experience, with multiple potential openings) • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or related field; Master’s degree preferred., • Various years of experience in aerospace stress analysis, structural engineering, or related field, preferably in the aerospace industry., • Familiarity with component design using 3D CAD software, preferably CREO, for basic design trades in support of multiple design engineers, • Proficiency in finite element analysis (FEA) software tools such as ANSYS, FEMAP/Nastran,, • Experience with aerospace materials, composites, and manufacturing processes., • Knowledge of industry standards and regulations related to aerospace structural design and analysis (e.g., FAA, MIL-STD, ASTM)., • Strong analytical and problem-solving skills, with the ability to interpret complex data and make informed engineering decisions., • Excellent communication and interpersonal skills, with the ability to collaborate effectively in a multidisciplinary team environment. EEOC Intuitive Machines is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Job DescriptionSummary The Quality Control tech is responsible for managing customer claims across North and South America for the Manuli, Ryco, and Techmaflex brands. This role owns first-level failure analysis of hydraulic components, leads structured root-cause investigations, and delivers clear, customer-ready technical reports. The position works closely with production plants, the technical centre, engineering, OEM, and WEO teams to ensure timely and effective corrective actions, high customer satisfaction, and continuous quality improvement. Primary Responsibilities · Own first-level failure analysis of hydraulic components and manage customer and supplier claims across North and South America. · Lead 8D root-cause analyses and define, verify, and document corrective and preventive actions. · Manage external (customer) and internal (supplier) claims through internal HDQ systems and customer portals, ensuring accurate data, actions, and timelines. · Collect and review all information required for claim management, including application details and operating conditions. · Analyze returned samples using appropriate measuring tools and document findings with measurements and photographs. · Prepare and issue professional technical reports clearly outlining root causes and corrective actions. · Visit customer sites (approximately 25% travel) to verify product application, installation, and usage, and provide technical guidance when required. · Collaborate with production plants and the technical centre on testing, containment actions, and permanent corrective actions. · Monitor claim metrics, identify trends, recommend preventive actions, and escalate systemic quality issues. · Perform additional duties as assigned. Qualifications · Bachelor’s degree in Mechanical Engineering, Mechanical Engineering Technology, or a related discipline. · Minimum of three years of experience in quality, claims management, or failure analysis roles. · Strong knowledge and practical application of the 8D problem-solving methodology. · Proficiency with precision measuring tools such as calipers and gauges. · Strong technical writing, data management, and analytical skills. · Proficiency with Microsoft Office applications, including Excel, Word, and PowerPoint. · Working knowledge of hydraulic systems and basic rubber material characteristics. · Working knowledge of ISO 9001–based quality management systems. · Proactive, results-oriented mindset with strong accountability and ownership.

Job DescriptionJob Overview: This position is responsible for developing, modifying, and maintaining all test software/hardware tasks and resources to support production manufacturing. Office located in Houston Duties and Responsibilities: Work with Test Development Engineer to develop test scripts, implement test plan, and smoothly carry out new production testing for mass production. Sustaining test related issues for production and work with internal team and customer for rootcause analysis as well as improvement. Monitor test failure trends in production and provide corrective actions to improve production test yields. Setup and maintain production test equipment such as UCS Servers, Terminal Servers, Switches, Power cycle boxes, Hipot machines, etc. Interface with customers and internal cross-functional teams to solve all testing-related issues. Come up with testing related improvement projects and be able to carry out the project for good execution and drive end result. Train Technicians and Testers on new and existing testing procedures and product troubleshooting. Perform other duties as assigned. Required Knowledge, Skills and Abilities: Manufacturing/Production Testing experiences is must. Hands on Python Programming experiences is must. Experience in troubleshooting hardware and software issues within a Linux/Unix/Windows environment is must. Other industrial test scripting & programming experiences is preferred. Experience in RESTFUL web services is a plus. An excellent communication (written and verbal) skill is must. Must have a strong customer service/satisfaction attitude Must have the ability and flexibility to work in a fast-paced, high-pressure manufacturing environment. Education and Experience: Bachelor's in computer related field Powered by JazzHR l0aGIuxgRX

Job Description Company Description: For over 75 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions — with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: • Process Control & Safety Systems, • Control Valves & Regulators, • Isolation Valves & Actuation, • Oil & Gas Automation, • Reliability Solutions & Services, • Pressure Management, • Specialty Pumps & Rotating Equipment, • Instrumentation Quality Systems & Compliance • Maintain and improve the company’s QMS in alignment with ISO 9001 and industry standards., • Lead internal, external, customer, and supplier audits., • Ensure compliance with OEM requirements, customer specifications, and regulatory obligations., • Develop and standardize QA processes for distribution, repair, testing, and field service operations., • Monitor and report quality KPIs (NCRs, rework, warranty, defect trends, audit findings)., • Lead root cause analysis (RCA) and corrective/preventive action (CAPA) activities., • Evaluate supplier performance and drive supplier corrective actions., • Collaborate with OEM partners to ensure compliance with technical and repair standards., • Serve as the escalation point for customer quality concerns and warranty issues., • Lead investigations and provide timely, data‑driven responses to customers., • Lead and mentor QA personnel across multiple locations., • Partner with OPEX to support Lean/Six Sigma initiatives and drive systemic improvements., • Promote a culture of quality, accountability, and operational discipline. Required • Bachelor’s degree in Engineering, Quality, Industrial Technology, or related field., • 7+ years of experience in quality assurance or quality engineering., • Experience in oil & gas, industrial equipment, or repair/service environments., • Strong knowledge of ISO 9001 and QMS implementation., • Proficiency with Root Cause Analysis (RCA), corrective/preventive action plans (CAPA), Failure Mode and Effects Analysis (FMEA), and other quality engineering tools., • Experience with Pressure Relief Valves, control valves, isolation valves, DCS/reliability systems (Distributed Control Systems), or rotating equipment., • ASQ certifications (CQE, CQA, CSSGB/CSSBB)., • Experience with Lean, Six Sigma, or OPEX methodologies., • Strong analytical and problem‑solving skills, • Excellent communication and customer‑facing abilities, • Leadership and team development, • Process discipline and continuous improvement mindset, • Ability to manage multiple priorities across a distributed organization, • Opportunity to shape and elevate the quality culture of a major industry leader, • High visibility role with direct impact on operational performance and customer satisfaction, • Collaborative environment with strong support from OPEX and executive leadership, • Competitive compensation, benefits, and professional development opportunities

Job DescriptionPurpose of the positionFoxconn Technology Group, a globally leading electronics manufacturing company, provides high-precision manufacturing solutions for top-tier technology brands. We are now recruiting multiple automation equipment engineers to ensure the efficient operation of SMT assemble line automation equipment. You will lead preventive maintenance, rapid troubleshooting, process optimization, and technological upgrades to support the demands of high-precision electronic manufacturing. Duties and Responsibilities： • Perform daily maintenance, calibration, and preventive maintenance on mainstream equipment such as SMT automation equipment (e.g.Router,mylar placement,Glue dispenser,pressure machine,IO foam auto assemble machine,finstack auto assemble machine etc.), • Quickly diagnose equipment failures, implement emergency repairs to minimize downtime, and develop long-term solutions;, • Adjust equipment parameters (placement accuracy, pressure accuracy, etc.) to improve yield, efficiency, and product reliability;, • Assist in promoting equipment modification and performance enhancement projects;, • Write equipment maintenance SOPs and failure analysis reports;, • Train technicians and collaborate with production, process, and quality departments to resolve cross-functional issues. Education and work experience :, • Educational Requirements: Associate's degree or higher,, • Degree required: Mechanical Engineering, Automation, Electronic Engineering or related fields.Work experience:, • More than 1 years of automation equipment maintenance experience, familiar with automation equipment (Router,mylar placement,Glue dispenser,pressure machine,IO foam auto assemble machine,finstack auto assemble machine etc);, • Candidates with background in consumer electronics / automotive electronics manufacturing are preferred.Working conditions, • Environment: SMT manufacturing workshop, working closely with the automation/global operations department;, • Shift: Typically 5 days with 8-hour core working hours, flexible but occasional overtime may be required for project deadlines;, • Competitive salary, benefits, and growth opportunities.Skills:, • Familiar with automation equipment mechanical/electrical systems (servo motor, pneumatic components, sensors, PCB conveyor system)., • Capable of using tools such as multimeters and oscilloscopes for circuit analysis and reading electrical schematics., • Able to quickly learn and master SMT equipment control software and basic PLC debugging. uGgnIl6l7c

Job DescriptionWorking Hours: Day shift, 6:00 a.m. – 2:00 p.m. Pay Rate: $18.00 per hourMain Functions Product Debugging and Testing • Perform functional testing and failure analysis on non-conforming products in both production and service environments., • Accurately record test results manually or electronically and report recurring issues related to processes, materials, or equipment., • Actively participate in cross-functional teams to identify root causes and implement corrective actions.Engineering Systems and IT Equipment, • Support and maintain engineering systems and IT tools used across all production phases., • Perform regular inspections, including virus control and system integrity checks., • Participate in the build-out, modification, or upgrade of IT and engineering infrastructure.Test Systems and Test Stations, • Conduct periodic inspections and maintenance of test systems, infrastructure, and tools used throughout production., • Assist in the setup, modification, and optimization of test stations and test environments.Teamwork, • Ensure proper handling of products during testing, failure analysis, and repair., • Confirm that only products meeting quality standards are released.Production Support, • Coordinate with the group leader and/or direct supervisor on testing and repair sequences to meet production targets.Customer Focus, • Recognize the importance of internal and external customers and contribute to delivering high-quality products and services.Order and Cleanliness, • Maintain a clean, organized, and safe work environment., • Ensure workstations are clean at shift handover, with special attention to test and failure-analysis equipment requiring specific care.Maintenance, • Maintain test infrastructure and selected IT-related systems, including network cabling, test stations, input devices, test tools, and hipot testers., • Monitor and manage stock levels of spare parts and consumables.Reporting, • Prepare end-of-shift reports documenting all relevant activities, findings, and issues.Attitude and Conduct, • Maintain a positive, flexible, and cooperative attitude in support of team objectives.Work Attire, • Wear required protective equipment in accordance with workplace policies (e.g., ESD clothing, safety glasses, ear protection).Punctuality, • Arrive on time and be fully prepared to begin work at the start of each shift.Overtime, • Entry-level position with an interest in the IT field, • Willingness to travel abroad on short notice, • Higher education is an advantagePrimary Skills, • Strong communication skills across all organizational levels, • Solid understanding of production processes, • Reliable, well-organized, and able to delegate tasks effectively, • Ability to prioritize work and make sound decisions, • Positive and proactive work attitude, • Flexibility and willingness to perform tasks outside the primary role when needed, • Strong team-oriented mindsetSecondary Skills / Competencies, • Strong analytical and problem-solving skills, • High adaptability and teamwork capability Powered by JazzHR DZZATnTyM2

Job DescriptionPurpose of the positionFoxconn Technology Group, a global leader in electronics manufacturing, is seeking a Failure Analysis Engineer to lead root cause investigations and drive process optimization. Once a part of the team you will have opportunity to lead real-time yield monitoring and rapid anomaly resolution to maintain target performance; drive dynamic analysis of defective main logic board to build troubleshooting expertise and streamline diagnostics; compile and deliver product analysis and yield reports to inform decision-making; and mentor new engineers and technicians to enhance team technical capability.Duties and Responsibilities1. Track production yield in real time, analyze trends weekly/monthly, and flag critical anomalies for leadership review. 2. Diagnose main logic board defects using advanced tools (oscilloscopes, spectrum analyzers, etc.) to identify root causes and train engineers/technicians on troubleshooting. 3. Respond immediately to yield deviations, lead Root Cause Analysis, and implement Corrective & Preventive Actions to resolve issues. 4. Adhere to company policies and Standard Operating Procedures for quality inspections to ensure consistent, standards-based processes. 5. Deliver weekly yield reports and present monthly trends/anomalies to stakeholders for strategic decision-making. 6. Identify process risks through continuous yield monitoring and recommend improvements to strengthen quality outcomes. Education and work experience 1.Successful completion of 4-years of high school, or equivalent, plus completion of 4 years of college with a bachelor’s degree, plus attainment of a master’s degree. Degree required: Electronic information engineering • Modern, collaborative offices or labs with flexible setups emphasizing innovation and teamwork., • Proficiency in circuit architecture, testing principles, chip functionality, component specifications, and circuit design principles., • Proficient with diagnostics instrumentation (oscilloscopes, multimeters, spectrum analyzers) to troubleshoot hardware issues and analyze faults., • Analytical problem-solving and clear communication skills to craft technical reports and deliver actionable insights to teams and clients 8fnGkbKqEn

Job DescriptionJOB SUMMARY: We are seeking a highly motivated Mechanical Engineer to join our PCBA (Printed Circuit Board Assembly) engineering team. This role is ideal for recent graduates or early-career professionals eager to build technical expertise in manufacturing and process engineering. You will receive structured on-the-job training and mentorship as you support the development, optimization, and maintenance of mechanical processes for high-quality electronic assemblies. RESPONSIBILITIES: • Assist in developing and implementing manufacturing process instructions (MPI)., • Support the design and optimization of mechanical tooling and fixtures for PCBA assembly., • Participate in process flow analysis to improve efficiency and manufacturability., • Conduct basic Design for Manufacturability (DFM) assessments., • Support failure analysis and troubleshooting under guidance from senior engineers., • Assist document and update standard operating procedures (SOPs)., • Collaborate with cross-functional teams including quality, test, and production. Education: • Bachelor’s degree in Mechanical Engineering, Industrial Engineering, or a related field., • Associate's degree in a relevant technical discipline with equivalent hands-on experience in electrical or manufacturing engineering. Experience:, • 0 + 2 years of experience in a manufacturing or industrial engineering environment., • Knowledge of PCBA (Printed Circuit Board Assembly) or manufacturing processes., • Exposure to or interest in testing, debugging and the use of test equipment in production environment is a plus., • Knowledge of using engineering lab tools or equipment.Skills:, • Foundational knowledge of mechanical engineering principles, with a strong interest in electronics manufacturing and PCBA processes., • Eagerness to learn and support the development, implementation, and optimization of PCBA manufacturing processes., • Familiarity with/or willingness to learn the PCBA equipment such as soldering machines, pick-and-place systems, and inspection tools (AOI, 5DX, ICT)., • Strong problem-solving skills with the ability to assist in root cause analysis and process troubleshooting., • Basic proficiency in CAD software (e.g., SolidWorks, AutoCAD) and Microsoft Office tools (Excel, Word, PowerPoint)., • Ability to work collaboratively in cross-functional teams and communicate technical information clearly., • Detail-oriented, organized, and committed to following engineering standards and quality practices., • Position may require up to 20 - 30% travel to other manufacturing sites. Powered by JazzHR iBh4zLjthf

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off About SDLG North America SDLG is a global leader in construction machinery and one of the worlds largest manufacturers of wheel loaders and excavators. As SDLG expands its North American presence, we are building a high-caliber technical support team focused on product reliability, dealer development, and world-class customer service. We are seeking a Regional Product Support Specialist who is passionate about heavy equipment, thrives on solving technical problems, and wants to help shape the future of SDLGs support structure in the U.S. and Canada. Position Overview The Reginal Product Support Specialist will provide frontline technical expertise to SDLGs dealer network, field technicians, and customers across North America. This role is responsible for advanced diagnostics, root cause analysis, technical reporting, and supporting field readiness for SDLGs growing product lineup. The ideal candidate brings strong hydraulic and electrical troubleshooting skills, communicates exceptionally well, and enjoys working hands-on in the field as much as supporting engineering behind the scenes. Key Responsibilities Serve as the primary technical resource for SDLG dealers, providing guidance on troubleshooting, diagnostics, and repair strategies. Partner with SDLG Engineering and Quality teams to communicate field feedback, recurring issues, and product improvement opportunities. Support machine commissioning, software flashing, diagnostic equipment setup, and service campaigns for the dealer network. Develop and maintain service documentation: troubleshooting guides, technical bulletins, training material, and field reports. Provide in-person and virtual training to service technicians to strengthen dealer capability and overall product support readiness. Lead or support field investigations related to product performance, safety concerns, and quality improvement actions. Assist with parts identification, technical information requests, and communication between dealers and SDLG departments. Travel to dealer locations, customer sites, and field events, approximately 50-60% travel expected. Qualifications Degree in a related technical field, or equivalent real-world diagnostic and field-support experience. 5+ years of experience in heavy equipment, diesel, construction machinery, or agricultural equipment. Strong understanding of hydraulic diagnostics, electrical troubleshooting, ECM/CANbus systems, and mechanical systems. Ability to read and interpret wiring diagrams, hydraulic schematics, and engineering documentation. Experience using diagnostic tools, software interfaces, multimeters, pressure testers, and data-logging equipment. Excellent communication, technical writing, and customer support skills. Ability to manage multiple priorities while supporting dealer needs with urgency and professionalism. Preferred Experience Prior experience with wheel loaders, excavators, motor graders, or material handling equipment. OEM or dealer-level support background. Familiarity with telematics systems, ECU flashing, and field commissioning. Exposure to warranty analysis, failure reporting, or quality improvement processes. What SDLG North America Offers Competitive salary + performance incentives Full health, dental, and vision benefits PTO, holidays, and paid travel Factory technical training Opportunity to directly impact product support strategy as SDLG expands across North America Flexible work from home options available.

Job Description Overview Materials & Processes Engineer LOCATION: NASA Johnson Space Center JOB STATUS: Full Time CLEARANCE: Background check & U.S. Citizenship required Are you inspired by human space exploration and passionate about pushing the boundaries of technology to benefit both space missions and life on Earth? Join our diverse and highly collaborative team as we tackle NASA’s deep space exploration challenges. As NASA’s largest engineering solutions provider, we partner with NASA centers across the United States to deliver cutting-edge engineering support for mission-critical programs. We have an exciting opportunity for an Materials & Processes Engineer! RESPONSIBILITES The Materials & Processes Engineer will: • Advise, guide, and provide consultation on requirements for Materials & Processes (M&P) for intravehicular (IVA) and, • extravehicular (EVA) environments, including materials selection, process control and qualification, design for corrosion, • prevention, electrical bonding, flammability, toxic off gassing, and processes specification., • Assist in review and development of hardware, analysis, operation, hazard reviews, anomaly resolution, requirements, • verification, re-flight assessments, and flight acceptance testing., • Formulate presentations and present to program boards as appropriate., • Implement M&P system requirements into hardware design and develop verification and validation plans and, • statements., • Provide input to program/project specifications and ensure appropriate materials requirements are incorporated into all, • program/project specifications at the right level., • Review project/program documentation, specifications, and engineering drawings to ensure M&P requirements are met, • for spaceflight hardware., • Assess whether standard vendor processes meet requirements, and if not, clearly define changes that need to be, • implemented., • Provide vendors with recommendations for qualification and acceptance testing that will properly satisfy verification of, • requirements., • Provide inspection and manufacturing process support for human space flight system., • Other duties as required. REQUIRED EXPERIENCE/SKILLS • Seven (7) or more years of related work experience in Materials and Processes., • Bachelor's degree or higher in Engineering (Metallurgy, Materials Science, Aerospace, Mechanical, Electrical, Chemical,, • Systems)., • Knowledge in materials and processes for space applications, including materials selection (metallic and nonmetallic), design for corrosion prevention and electrical bonding, failure analysis, heat treatment, adhesive bonding, contamination control, etc., • Familiar with metallic and nonmetallic materials specifications, properties, testing., • Knowledge in engineering drawing review for materials and processes., • Overall background on M&P working knowledge for different systems: propulsion, crew compartments, environmental life support systems, thermal, and electronic systems., • Effective written and verbal communication skills with the ability to critically assess manufacturing/material processes and designs., • Willingness to learn and coordinate across other disciplines is highly desired., • Ability to assess and prioritize tasks and identify potential technical risks., • Ability to work collaboratively and independently in a multidisciplinary field., • Strong analytical and problem-solving skills. *This position has been posted at multiple levels. Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. PREFERRED EXPERIENCE/ SKILLS • M.S. or Ph.D. in Engineering., • Previous experience in material selection (metallic and nonmetallic) for electrical components, corrosion prevention, flammability prevention, oxygen compatibility, processes qualification, contamination control, development, test, and evaluation for NASA and/or aerospace projects., • Previous experience in directing, guiding, and coordinating a technical team is highly desirable., • Previous experience with human space flight system engineering and integration practices. #LI-AD1 #CJ

Job DescriptionPurpose of the position Foxconn Technology Group, a global leader in electronics manufacturing, is seeking a Failure Analysis Engineer to lead root cause investigations and drive process optimization. Once a part of the team you will have opportunity to lead real-time yield monitoring and rapid anomaly resolution to maintain target performance; drive dynamic analysis of defective main logic board to build troubleshooting expertise and streamline diagnostics; compile and deliver product analysis and yield reports to inform decision-making. Duties and Responsibilities 1. Track production yield in real time, analyze trends weekly/monthly, and flag critical anomalies for leadership review., 2. Diagnose main logic board defects using advanced tools (oscilloscopes, spectrum analyzers, etc.) to identify root causes., 3. Respond immediately to yield deviations, lead Root Cause Analysis, and implement Corrective & Preventive Actions to resolve issues., 4. Adhere to company policies and Standard Operating Procedures for quality inspections to ensure consistent, standards-based processes., 5. Deliver weekly yield reports and present monthly trends/anomalies to stakeholders for strategic decision-making., 6. Identify process risks through continuous yield monitoring and recommend improvements to strengthen quality outcomes. Education and work experience 1. Successful completion of 4-years of high school, or equivalent, plus completion of 4 years of college with a bachelor’s degree, plus attainment of a master’s degree. Degree required: Electronic information engineering, 2. 1-3 years of work experience in failure analysis within Computer, Communication, and Consumer Electronics sectors. Working conditions • Modern, collaborative offices or labs with flexible setups emphasizing innovation and teamwork., • Employees are continuously encouraged to learn and grow their careers in smart manufacturing. Skills: 1. Proficiency in circuit architecture, testing principles, chip functionality, component specifications, and circuit design principles., 2. Proficient with diagnostics instrumentation (oscilloscopes, multimeters, spectrum analyzers) to troubleshoot hardware issues and analyze faults. bC9nkquR9c

Job DescriptionPurpose of the position The Product Quality Engineer is a professional who understands the principles of product and service quality evaluation and control. This body of knowledge and applied technologies include, but are not limited to, development and operation of quality control systems, application and analysis of testing and inspection procedures, the ability to use statistical methods to diagnose and correct improper quality control practices, an understanding of human factors and motivation, facility with quality cost concepts and techniques, and the knowledge and ability to develop and administer management information systems and to audit quality systems for deficiency identification and correction. This position will be responsible for the implementation, use, compliance and maintenance of quality systems and tools including the Quality Management System. Duties and Responsibilities • Define the product quality control plan and audit the implement status of quality control plan., • Works with cross-functional teams to prioritize key site projects and determine appropriate resources and timing; integrate activities using quality principles such as lean Six Sigma with Quality Management System activities such as Corrective and Preventive Action (CAPA) and Quality Improvements to assure effectiveness and compliance to customer and regulatory requirements., • Evaluates performance of current operational Quality and Quality Engineering methods (e.g., failure analysis, measurement systems analysis, process development, etc.) and drives best practices throughout the business and transfers that knowledge across the business, as appropriate., • Reports significant issues or developments identified during Quality activities and provides recommended process improvements to management., • Becomes proficient in the various business systems used at First Quality, including MES, quality data collection systems and understands how the systems are integrated with each other and within the business Education and work experience • Bachelor’s degree in Engineering discipline or a technical field with 2 years of quality or electrical manufacturing experience required., • Three or more years in quality or manufacturing engineering strongly preferred., • Highly qualified candidates would have an advanced degree in Analytics and/or ASQ CQA or CQE certification, and/or Lean or Six Sigma certification Working conditions • Office-based role, fast-paced work environment Skills: • Having 2 years working experience of product/process analysis and handling customer complaint for electronic product., • Familiar with applying quality control tools to analyze and complete quality problem report., • Good quality awareness and interpersonal communication skills., • Strong knowledge of MS-Office products and proficiency in Mini Tab uYKUghGaBO

Job Description Octagos is modernizing remote cardiac monitoring with AI-powered automation, seamless EHR integrations, and accuracy proven in high-volume, real-world clinics. Atlas AI™ triages cardiac device transmissions to filter nonactionable alerts and highlights the events that need true clinical attention. Through our Two-Brain Approach™ – combining Atlas AI™ with IBHRE-certified oversight – Octagos delivers 99%+ accuracy, sensitivity, and specificity for near-perfect clinical performance. With fast bi-directional EHR integrations, and flexible, cost-effective implementation, Octagos helps clinics scale care efficiently without compromise. Recognized by TIME and Statista as one of the World’s Top HealthTech Companies 2025, Octagos is redefining how cardiac care is delivered. We’re looking for a Sr. Tech Lead, Production Support to own the day-to-day health, stability, and incident resolution of the Octagos platform. This person will build and lead a production support team, establish processes for monitoring and triaging issues, and serve as the bridge between our clinics and engineering. You’ll be the first line of defense when something goes wrong, and the driving force behind making sure it doesn’t happen again. This role is ideal for someone who thrives in fast-paced environments, has a strong technical foundation, and brings operational rigor with a customer-first mindset. You’ll work closely with the VP of Engineering, Infrastructure, Security and the development team across the US and India, and our client success and clinical operations teams. This is an In-Office position based in Houston, Texas. Key Responsibilities Production Operations & Incident Management • Own the production support function end-to-end: monitoring, triage, escalation, resolution, and post-incident review, • Establish and enforce incident management processes including severity classification, SLAs, runbooks, and communication protocols, • Manage and respond to production incidents across the full stack: Angular portal, .NET API, SQL Server, Azure services, RPA bots, and EMR integrations, • Monitor platform health using Azure Application Insights, Log Analytics, and custom alerting; proactively identify issues before they reach clinics, • Build, hire, and manage a team of production support analysts and engineers, • Define on-call rotations, escalation paths, and shift coverage to ensure adequate support during business hours and critical after-hours windows, • Create and maintain a knowledge base of known issues, troubleshooting guides, and standard operating procedures, • Partner with engineering to identify and prioritize reliability improvements, tech debt reduction, and observability gaps, • Own the operational readiness process for new releases - review deployments, validate release notes, and confirm monitoring coverage before go-live, • Drive root cause analysis (RCA) for recurring production issues and ensure permanent fixes are tracked to completion, • Serve as the primary point of contact between client success, clinical operations, and engineering for production issues, • Triage and contextualize clinic-reported issues, distinguishing between platform bugs, configuration issues, data quality problems, and user error, • Coordinate with the RPA team on bot failures across vendor portals (Medtronic, Boston Scientific, St. Jude, Biotronik) and EMR push failures (Epic, Athena, NextGen, Cerner, etc.), • Leverage AI-assisted alert triage and log summarization to speed up incident identification, reduce noise, and improve time-to-detection, • Use AI to draft clear, stakeholder-ready incident updates and post-incident summaries while ensuring accuracy and appropriate clinical/operational context, • Apply AI-assisted root cause analysis workflows (pattern detection across traces, tickets, and recent deployments) to identify recurring failure modes and prioritize permanent fixes, • 10+ years in production support, site reliability, DevOps, or application support roles, with at least4years in a people management capacity, • Strong hands-on experience with Microsoft Azure (App Services, SQL Server, Application Insights, Log Analytics, Azure Functions), • Working knowledge of .NET/C# applications, SQL Server (T-SQL query analysis, execution plans, blocking/deadlock diagnosis), and web application architectures, • Experience building incident management processes from scratch or significantly improving existing ones, • Demonstrated ability to manage cross-functional escalations and communicate technical issues to non-technical stakeholders, • Comfortable working across US and international (India) engineering teams with overlapping time zones, • Experience in healthcare SaaS, clinical software, or HIPAA-regulated environments, • Familiarity with remote patient monitoring, medical device data, or cardiology workflows, • Experience with RPA platforms, Playwright-based automation, or web scraping bots in production, • Familiarity with EMR systems (Epic, Athena, NextGen, Cerner) and HL7/FHIR integration patterns, • Hands-on experience with Power BI, Hangfire, Auth0, or Azure DevOps pipelines, • Experience with observability tooling: Open Telemetry, Grafana, PagerDuty, or equivalent, • Paid Time Off, • Health, dental, and vision insurance, • Competitive salary commensurate with experience, • Opportunity to shape a critical function at a growing healthcare technology company

Job Description • The IQA Supervisor is responsible for ensuring that the staffing requirements in his/her area of responsibility are appropriately distributed to achieve the required performance in this area., • Accountable for ensuring that the quality system in his/her area of responsibility meets the requirements of the company's quality system., • Responsible for controlling non-conforming outputs., • In charge for collecting objective evidence of conformance., • Working as a member of the Quality Assurance team and supporting the Manufacturing group, the IQA Supervisor will be responsible for inspecting all products according to the criteria outlined in the relevant instructions., • If the products do not comply, the Incoming IQA Supervisor will be responsible for recording all data necessary for error analysis and ensuring that feedback is provided to the supplier's quality engineer as quickly as possible., • IQA Supervisor makes sure that all new goods must be photographed appropriately and their data must be checked in both AVL and SAP., • Responsible for the quality culture to ensure that the company's quality policy is implemented in the day-to-day running of the factory., • Must recognize the importance of ensuring customer satisfaction, whether internal or external, and act to provide the best quality products, services and communications to those customers., • Responsible for ensuring that the allocation of available capacity is consistent with the plant's production plan., • Accountable for ensuring all quality data and has the obligation to report any discrepancies, defects or problems to the Quality Manager., • IQA Supervisor should perform his/her professional duties as an active team member, working with each department of the company, with a decisive role in quality assurance and customer issues., • Provide quick and effective feedback to other teams in the company, either in the event of gross failure modes or negative trends., • Activities should be self-initiated rather than retrospective, with a focus on problem prevention., • Responsible for checking compliance with the standards, whether they are auditing their area of responsibility for a product, process or incoming goods., • Required to perform a critical assessment role during internal audits to support ISO requirements., • The IQA Supervisor is measured against goals, objectives, and KPI’s., • IQA Supervisor must have QMS, QA, QC, and Audit experience. IQA Supervisor should have experience supervising employees and managing tasks., • Experience At least two to three years in a similar manufacturing site or in quality assurance, preferably in a high-volume production environment, • General skills: good communication, verbal, analytical, logical, and problem-solving skills., • You must be able to work independently and in a group. Be highly persistent, technically oriented, and accurate in your work., • Be a proficient Word, Excel PC software user., • Presentation and organizational skills, visual thinking, and problem-solving skills, • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Vision insurance, • Paid holidays Powered by JazzHR ZGCLWz9R00

Job DescriptionDescription: JOB SUMMARY The Mechanic performs maintenance on all company assets, overhauls minor components and replacements and assists all mechanics, mechanic helpers and technicians with electrical, hydraulic, computer diagnostics. This position also assists technicians with major overhauls on major components, performs scheduled and unscheduled preventative maintenance and responds to service and road calls. DUTIES & ESSENTIAL JOB FUNCTIONS AND RESPONSIBILITIES • Wear appropriate personal protective equipment (PPE) when and where required., • Perform preventive maintenance or repairs on company assets according to work pending reports, VCR reports, PM schedules, and the direction of the Maintenance Team., • Document repair operations and time-tracking in accordance with company procedures., • Requisition parts as necessary., • Perform failure analysis and reporting findings to maintenance management., • Ensure work area is clean and neat., • Maintain service truck readiness including safety equipment, tools, equipment, and cleanliness., • Assist co - workers with diagnostics and repairs., • Comply with company safety policies and with applicable state and federal regulations., • Report immediately any safety violations and correct unsafe acts or conditions., • Conduct technical inspections and document findings., • Maintain repair order documentation to include repair description, parts used, and repair times., • Perform monthly inventories as required., • Must possess own tools., • Other duties as assigned. • 5 or more years experience requiredRequirements:

Job DescriptionQuality Engineer Location: Houston TX Employment Type: Full-time Overview: We are seeking a Quality Assurance Engineer to join our team and ensure the reliability and performance of refurbished GPUs and servers. The role focuses on inspection, testing, process optimization, and compliance to ensure that all products meet industry standards and customer expectations. The ideal candidate has a strong background in hardware testing, failure analysis, and quality improvement within a manufacturing or refurbishment environment. This position is responsible for developing quality practices, Standard Operating Procedures (SOPs), and product documentation. The main objective is to maintain efficient and effective RMA processes while ensuring the product’s high quality is maintained. Key Responsibilities: Quality Inspection & Testing • Conduct incoming, in-process, and final inspections on refurbished GPUs and servers to verify compliance with quality standards., • Perform functional and performance tests on GPUs and servers, including stress tests, benchmarking, and burn-in testing., • Utilize diagnostic tools to identify hardware defects, firmware inconsistencies, and compatibility issues., • Verify proper firmware updates, driver installations, and system configurations during refurbishment., • Develop and implement standard operating procedures (SOPs) for refurbishment quality assurance., • Collaborate with the refurbishment team to troubleshoot and resolve quality issues., • Use Lean, Six Sigma, 8D, or A3 methodologies to analyze and improve quality processes., • Monitor and analyze defect rates, root cause analysis (RCA), and corrective actions to reduce failure rates., • Ensure compliance with ISO 9001 and ESD handling, • Maintain accurate quality reports, inspection logs, and non-conformance reports (NCRs)., • Train technicians and operators on quality inspection procedures and best practices., • Work closely with supply chain, engineering, and operations teams to improve refurbishment efficiency and reduce defects., • Provide feedback to suppliers and vendors regarding component quality issues. Requirements and Skills • Knowledgeable in development and maintenance of Control Plans and PFMEA., • Failure Analysis experience is preferred., • Strong background in statistical analysis, DOE., • Excellent verbal and written communication skills., • Attention to detail and problem-solving skills., • Bachelor’s Degree in Engineering or related field., • Five (5) years plus of working experience as a Quality Engineer, preferably in electronics, IT hardware, or refurbishment., • Strong understanding of GPU architecture, server hardware, and diagnostic testing., • Experience with failure analysis, ESD protection, and component-level troubleshooting., • Proficiency in quality methodologies such as Six Sigma, 8D, and FMEA., • Familiarity with automated and manual testing tools for hardware validation., • Knowledge of industry standards (ISO 9001, R2, RoHS, and UL safety certifications)., • Strong problem-solving, data analysis, and documentation skills., • Ability to work in a fast-paced, hands-on environment with cross-functional teams., • Certifications: Six Sigma Green/Black Belt, ASQ Certified Quality Engineer (CQE), or IPC certifications. Powered by JazzHR baYNxCd7KJ

Job Description Job Description: This position is responsible for performing tests and troubleshooting products to ensure production and quality standards are met. Duties and Responsibilities: • Perform testing and final level debugging for production., • Troubleshoot and repair failures; diagnose root cause and recommend corrective action., • Responsible for the procurement, maintenance, troubleshooting, and improvement of test equipment., • Assist Test Engineers with NPI (new product introduction) test station setup and other processes including modeling, pre-pilot, and pilot runs., • Train Repair Technicians and Testers on new and existing testing procedures and product troubleshooting., • Analyze test correlation of RMA (return merchandise authorization) fallout and work with vendors to follow up with FA (failure analysis) results., • Report ORT (on-going reliability tests) and RDT (reliability demonstration tests) and escalate issues to Test Engineers., • Monitor and maintain testing station performance., • May rework products as a result of testing issues., • Must have hands-on experience in computer hardware repair, troubleshooting, and installation, • Excellent communication (written and verbal) skills, • Knowledge of general programming languages, such as C/C++, Pearl, Java, and Labview, preferred, • Must have a strong customer service/satisfaction attitude, • Bachelor’s degree in Computer Engineering, Electrical Engineering or Computer Science preferred. Associate’s degree with 2 years of manufacturing test experience will be considered., • 2 years of manufacturing test experience preferred., • 3+ years of software/test development experience preferred., • Experience with network product installation (routers, switches) is a plus. Foxconn Assembly, LLC is an Equal Opportunity Employer (EOE). All qualified candidates will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, or marital status in accordance with applicable federal, state and local laws. Foxconn Assembly, LLC participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Powered by JazzHR 2qIBP18qS9

Job Description Empower Your Future: At MetOx International, we're pioneering the next era of energy security and abundance through breakthrough superconducting technology. As a Senior Process Engineer, you'll join a dynamic team committed to strengthening the world's energy systems to make them more resilient, efficient, and reliable. Based at our global headquarters in Houston, TX, the Senior Process Engineer will lead process optimization projects, drive defect reduction, and support scaling and documentation of critical process steps. Key Responsibilities Engineering Leadership • Leads development, optimization, and continuous improvement of HTS buffer layer deposition processes using PVD systems., • Serves as the technical owner of the buffer deposition tool and process, ensuring high reliability, stability, and process capability., • Designs and executes experiments to understand and control thin-film growth mechanisms, including grain size, orientation, and texture., • Investigates complex process and equipment issues, determines root causes, and implements long-term corrective actions., • Develops deep understanding of how process parameters and equipment behavior influence thin-film nucleation, microstructure, and film performance. Project Execution • Owns process development and improvement projects from problem definition through experimental validation and implementation., • Defines timelines, deliverables, and success metrics for engineering initiatives., • Tunes and optimizes key PVD process parameters including plasma characteristics, ion-assisted deposition conditions, reactive process behavior, cathode voltage hysteresis, RF and pulse parameters, gas environment, and energy delivered to the growing film., • Translates experimental results into robust and repeatable manufacturing process windows., • Develops models linking process conditions, equipment performance, and resulting film microstructure., • Partners with engineering, production, and maintenance teams to implement process improvements and ensure stable manufacturing operations. Documentation & Quality • Maintains process documentation, specifications, and operating procedures to meet quality and regulatory standards., • Reviews and updates control plans and process failure mode and effects analyses (PFMEAs)., • Uses statistical analysis and data-driven methods to evaluate engineering trials and production performance., • Supports process scaling, transfer, and documentation as manufacturing volume increases. Mentorship • Mentors junior engineers and supports development of internal technical expertise in thin-film deposition and PVD processing., • Promotes first-principles thinking, engineering rigor, and data-driven decision making across the team., • Other duties as assigned Minimum Qualifications: • Bachelor's degree in engineering or related field., • 4 years of process or manufacturing experience. An advanced degree may be substituted for required experience on a year-for-year basis, depending on relevance and level., • Hands-on experience tuning thin-film grain size, texture, or crystallographic orientation using PVD techniques, including ion-assisted deposition., • Experience sustaining and optimizing vacuum deposition systems., • Strong first-principles understanding of how PVD process parameters influence film growth, including plasma characteristic, ion energy and flux, cathode voltage and pulsed power, gas pressure and mean free path, film nucleation and grain evolution., • Prior exposure to thin-film metrology in characterizing thin film texture such as x-ray diffraction, electron diffraction (preferably RHEED), and ellipsometry. Preferred Qualifications: • Advanced degree in engineering or related field., • Experience leading Kaizen or lean events., • Familiarity with Six Sigma, statistical analysis, or automation tools., • Experience with ion-assisted deposition or epitaxial thin-film growth especially in HTS applications., • Experience owning or sustaining complex vacuum deposition tools., • Background in superconducting materials, oxide films, or textured thin-film systems. Knowledge, Skills, & Abilities: • Deep curiosity about how equipment physics and process physics interact., • Strong analytical and problem-solving ability with a data-driven engineering mindset., • Ability to translate complex experimental results into clear process insights and manufacturable solutions., • Comfort leading technical investigations with minimal supervision., • Excellent communication skills and a quality-first engineering approach Physical Demands: This position requires sitting at a desk and viewing a computer screen for extended periods while working or performing other office tasks. Ability to move around the office, including occasional standing, walking, and bending to retrieve documents, attend meetings, or use office equipment. Some light lifting may be required, up to 20 lbs. MetOx is proud to offer competitive benefits including: • Health, dental, and vision available on the first day of employment, • 401(k) match, • Paid parental leave & adoption assistance, • Educational reimbursement, • And more! We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description The Avionics Radiation Hardness Assurance Engineer will support the space program located in Houston, TX. RESPONSIBILITIES: • Report directly to the Electronics and Electrical Section Manager as part of group of over 45 other Electronics and Electrical Engineers., • Be familiar with systems engineering and integration (S&EI) and/or specialty engineering for NASA spaceflight (or similar complexity)., • Support new projects and sustaining efforts throughout product life cycle, including standards adjudications, system requirements reviews, preliminary design reviews, critical design reviews, manufacturing readiness reviews, flight readiness reviews, and failure investigations, as well as testing, analysis, inspection, sustaining support efforts., • Drive critical decision-making processes for performing radiation testing, deriving part performance classification and taxonomy, and improving vehicle and subsystem level radiation reliability and survivability., • Tailor Radiation Hardness Assurance (RHA) requirements based upon mission, environment, application, and lifetime (MEAL) factors as well as program/project risk posture., • Bound stochastic and deterministic electronics failure modes induced by natural space radiation environment., • Write verification test plans, test procedures, and test reports against product requirement., • Ability to read and understand schematics for circuit and system diagrams to evaluate upstream and downstream impacts for transient analysis., • Collaborate with design engineers, project personnel, and other stakeholders to evaluate performance of electronic hardware and assess need to address impacts to functional, performance, reliability, and availability metrics., • Support program activities on behalf of subject matter experts (SMEs) by assessing relevance information with technical discussions to determine need to request SME consideration, and then accurately conveying SME assessments back to program and project stakeholders., • Make recommendations for design, process improvements, and data collection., • Perform root-cause analysis of test failures and communicate recommended actions., • Present test results and data analyses to team members, project engineers, program managers, systems engineers, formal boards/panels, and more., • Ability to adapt in the face technical hurdles and overcome challenges associated with increasing use of industrial-grade and automotive-grade components in space applications., • Familiarity with Poisson, Markov, and/or Gaussian statistical analysis., • Willingness to work in a technically challenging field., • Comply with all radiation regulatory requirements for radiation safety., • Test Engineer / Lab Scientist with at least 1 year experience., • Other duties as assigned. REQUIRED: This position has been posted at multiple levels (must meet minimum level indicated). Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. • This position requires US Citizenship or Permanent Resident status due to the sensitivity of customer related information., • Must have a bachelor's degree in the field of engineering., • Must have 1+ years of recent and related work experience., • Be familiar with the subject matter expertise (SME) and/or specialty engineering field in radiation effects in microelectronics for NASA spaceflight (or similar complexity)., • Work directly with technicians, engineers, managers, and other stakeholders on a wide variety of Projects., • Possess technical knowledge of radiation effects in microelectronics and avionics systems, may include: basic mechanisms for single-event effects and total dose, test strategies, mitigation techniques, and analysis of circuits, systems, and data links., • Be familiar with the suite of activities known as Radiation Hardness Assurance (RHA) for avionics (analog, digital, power, etc.): determining Mission, Environment, Application, and Lifetime (MEAL) factors, developing and interpreting requirements, bill-of-materials requirement gap analysis, radiation testing, environment definition, radiation transport, shielding analysis, dose-depth curves, Single-Event Effects Criticality Analysis (SEECA), derating, Safe Operating Area (SOA), Radiation Design Margin (RDM), etc., • Assess EEE parts, circuits, functions, components, subsystems, and systems to evaluate risks, effectiveness of mitigation strategies, and the ability to meet functional, performance, and reliability requirements during and after exposure to the mission ionizing radiation environment., • Lead or support screening and characterization test efforts for heavy ion, proton, and pulsed-laser Single-Event Effects (SEE), Total Ionizing Dose (TID), Enhanced Low-Dose Rate Sensitivity (ELDRS), Total Non-Ionizing Dose (TNID), Displacement Damage Dose (DDD), etc., • Create detailed radiation assessments, presentations, test plans, analyses, and reports., • Design, troubleshoot, and repair new and existing radiation test setups, may include: cables, laboratory test equipment, printed circuit boards, software, firmware, hardware description languages, etc. DESIRED: • BS degree in Electrical Engineering/ Materials Engineering / Aerospace Engineering/ Nuclear Engineering/ Physics in related radiation area from an accredited engineering school and a minimum of zero (0) years of related engineering experience, or a MS/ PhD in related radiation area with degree in Electrical Engineering / Materials Engineering / Aerospace Engineering/ Nuclear Engineering/ Physics from an accredited engineering school., • Experience with test hardware such as oscilloscopes, multi-meters, logic analyzers, function generators, electronic load banks, power supplies, power analyzers., • Familiar with systems engineering and integration (S&EI) and/or specialty engineering for NASA spaceflight (or similar complexity) with systems engineering and integration (S&EI) and/or specialty engineering for NASA spaceflight (or similar complexity)., • Experience with test hardware such as oscilloscopes, multi-meters, logic analyzers, function generators, electronic load banks, power supplies, power analyzers., • Prior experience in design and test of analog instrumentation systems., • Project based experience designing, building, testing, and troubleshooting power distribution electronics, battery systems, and other electrical hardware (requirements definition; system modeling and simulation; circuit analysis; PCB design, fabrication; requirements verification)., • Excellent fabrication, and assembly; harness fabrication; requirements verification)., • Excellent communication skills and the ability to work in a multi-disciplinary team of mechanical, electrical, and software engineers designing and building world-class, NASA spaceflight hardware., • Prior experience in design and test of power supply and conditioning systems. WORK LOCATION: • This position is located onsite and offers a 9/80 schedule with every other Friday off; some travel may be required., • Schedules are subject to change based on the requirements of the position and/or customer needs. BACKGROUND INVESTIGATIONS REQUIRED: All Bastion employees must be able to pass a national agency check, and some positions require clearance and will require an extensive background verification/check process. DRUG AND ALCOHOL SCREENING REQUIRED: All Bastion employees must be able to pass a pre-employment drug screen and are required to participate in periodic random drug and alcohol screenings. STANDARD BASTION REQUIREMENTS: • Must have experience with Microsoft Office Suite, Word, Excel, PowerPoint, and TEAMS., • All of Bastion's employees must be team players with strong work ethics and must be culture oriented., • Able to communicate effectively, verbally and in written form, with internal and external customers., • Able to follow company programs, processes, procedures, practices, requirements, goals, and objectives., • Must be organized with good time management skills and must be able to work outside normal schedule and adjust schedule to meet peak periods and surge requirements., • Generally, an office environment, but can involve inside or outside work depending on the task., • Work may involve sitting or standing for extended periods (90% of the time) and may require lifting and carrying up to 25 lbs. (5% of the time)., • Regular attendance in accordance with an established work schedule is critical. BASTION BENEFITS: Bastion offers a wide range of benefits for their full-time employees; medical, prescription, dental, vision, AD&D, disability benefits, life insurance, retirement 401k, vacation, sick pay, holidays, flexible work schedules (when available), along with many other options. We also support career advancement through professional training and development. ABOUT BASTION: Bastion offers career opportunities with competitive benefits, exciting possibilities for advancement, and an exceptional work environment; the well-being of our employees is a priority, and our flexibility allows our employees a great work life balance. Our culture is based on strong business ethics, integrity, and professionalism. Our team members are known for their initiative and high-quality work. When it comes to our employees, we value, respect, and help them grow in their careers. WORKPLACE EXCELLENCE: At Bastion, we are passionate about our people and our safety culture. Individual thoughts, opinions, and perspectives bring value and help us develop solutions for challenging problems, they make us more inventive, and more resilient. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status. Bastion participates in e-Verify. #EntryLevel #LI-Onsite BT-26059 Job Posted by ApplicantPro

Job DescriptionSalary: Blackstone Industrial provides innovative, high-quality, and sustainable solutions for critical rotating and static equipment. As one of North Americas leading technical service providers, we excel in field services, parts, repairs, and engineering. Trusted by industries such as heavy oil and refining, petrochemical, power generation, energy transmission, and agriculture, Blackstone is shaping the future of compressor maintenance and operation, striving to set new benchmarks. As we expand our operations globally. The Rotating Equipment Millwright is a reliable and safety-conscious individual that performs shop-based tasks involving rotating equipment. The ideal candidate will maintain a clean and organized workspace, adhere to safety protocols, and work effectively both independently and as part of a team. Blackstone is hiring a skilled Millwright to perform disassembly, cleaning, inspection, measurement, and mechanical rebuild tasks on a wide range of rotating equipment. This role is responsible for the accuracy of DCIs, the integrity of rebuilds, and adherence to the highest safety and quality expectations. Responsibilities • Perform DCIs (Disassembly, Clean, Inspect) in accordance with Inspection & Test Plans (ITPs)., • Identify wear patterns, damage modes, and repair requirements during teardown., • Take precision measurements (ID/OD, axial/radial clearance, runout, eccentricity) using micrometers, calipers, dial indicators, and bore gauges., • Accurately complete inspection data sheets, photos, and teardown documentation., • Support failure analysis with the Shop Foreman, Machinist, and QA staff., • Reassemble equipment with correct fits, tolerances, bearing installation, seals, torquing, and alignments., • Validate machined components prior to installation., • Operate overhead cranes, rigging, slings, and lifting equipment with full safety compliance., • Maintain organized work areas, proper tool control, and shop cleanliness., • Follow all Blackstone safety requirements; stop work and escalate hazards as necessary., • Ensure final assembled equipment meets all dimensional, functional, and quality requirements. Education & Experience • 35+ years millwright or mechanical experience in rotating equipment repair or industrial maintenance., • Strong understanding of pump, compressor, gearbox, turbine, or blower internals., • Skilled with precision measurement instruments and tolerance interpretation., • Experience with bearing installation, seal systems, torquing, and mechanical assembly., • Experience operating overhead cranes and rigging equipment safely., • Ability to read and follow OEM manuals, ITPs, and repair specifications., • Strong accuracy, documentation discipline, and mechanical troubleshooting skills., • Cross-functional capability to support both millwright/mechanical and machining tasks when required., • Ability to assist machinists with measurement verification, fit-up validation, or basic machining support., • Understanding of how machining tolerances translate to mechanical fits and rebuild requirements., • Experience collaborating in a combined millwrightmachinistQA shop environment., • Broader rotating-equipment exposure across multiple equipment types and OEMs Requirements • Ability to lift 50+ lbs and work safely in a high-mix shop environment., • Successful completion of pre-employment drug and alcohol testing., • H2S, Fall Arrest, Confined Space, and CSO safety tickets preferred.

Job Description Are you passionate about human space exploration, understanding the origins of the universe, and working with a passionate and diverse team to make a difference? If you are, we need you! We need your talent, teamwork, and energy to help us achieve great things that inspire people all over the globe. We need you to bring creative ideas and diverse backgrounds to help us envision, shape, and deliver systems that will enable the exploration of space while benefiting people here on Earth. We are excited about what we do, and we need you on our team as we take on exciting challenges for NASA's pursuits in deep space exploration. We have an exciting opportunity for an Avionics Radiation Hardness Assurance Engineer to join our JETS II contract team at NASA Johnson Space Center in Houston, TX. If selected you will: • Report directly to the Electronics and Electrical Section Manager as part of group of over 45 other Electronics and Electrical Engineers., • Be familiar with systems engineering and integration (S&EI) and/or specialty engineering for NASA spaceflight (or similar complexity)., • Support new projects and sustaining efforts throughout product life cycle, including: standards adjudications, system requirements reviews, preliminary design reviews, critical design reviews, manufacturing readiness reviews, flight readiness reviews, and failure investigations, as well as testing, analysis, inspection, sustaining support efforts., • Drive critical decision-making processes for performing radiation testing, deriving part performance classification and taxonomy, and improving vehicle and subsystem level radiation reliability and survivability., • Tailor Radiation Hardness Assurance (RHA) requirements based upon mission, environment, application, and lifetime (MEAL) factors as well as program/project risk posture., • Bound stochastic and deterministic electronics failure modes induced by natural space radiation environment., • Write verification test plans, test procedures, and test reports against product requirement., • Ability to read and understand schematics for circuit and system diagrams to evaluate upstream and downstream impacts for transient analysis., • Collaborate with design engineers, project personnel, and other stakeholders to evaluate performance of electronic hardware and assess need to address impacts to functional, performance, reliability, and availability metrics., • Support program activities on behalf of subject matter experts (SMEs) by assessing relevance information with technical discussions to determine need to request SME consideration, and then accurately conveying SME assessments back to program and project stakeholders., • Make recommendations for design, process improvements, and data collection., • Perform root-cause analysis of test failures and communicate recommended actions., • Present test results and data analyses to team members, project engineers, program managers, systems engineers, formal boards/panels, and more., • Ability to adapt in the face technical hurdles and overcome challenges associated with increasing use of industrial-grade and automotive-grade components in space applications., • Familiarity with Poisson, Markov, and/or Gaussian statistical analysis., • Willingness to work in a technically challenging field., • Proficiency with Microsoft Office Suite (Word, Excel, Outlook, Teams, etc.)., • Ability to work effectively in a team environment., • Comply with all radiation regulatory requirements for radiation safety., • Test Engineer / Lab Scientist with at least 1 year experience. This position has been posted at multiple levels. Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. • Typically requires a bachelor's degree in Engineering and a minimum of 1 year of experience in the field or in a related area., • Be familiar with the subject matter expertise (SME) and/or specialty engineering field in radiation effects in microelectronics for NASA spaceflight (or similar complexity)., • Work directly with technicians, engineers, managers, and other stakeholders on a wide variety of Projects., • Possess technical knowledge of radiation effects in microelectronics and avionics systems, may include: basic mechanisms for single-event effects and total dose, test strategies, mitigation techniques, and analysis of circuits, systems, and data links., • Be familiar with the suite of activities known as Radiation Hardness Assurance (RHA) for avionics (analog, digital, power, etc.): determining Mission, Environment, Application, and Lifetime (MEAL) factors, developing and interpreting requirements, bill-of-materials requirement gap analysis, radiation testing, environment definition, radiation transport, shielding analysis, dose-depth curves, Single-Event Effects Criticality Analysis (SEECA), derating, Safe Operating Area (SOA), Radiation Design Margin (RDM), etc., • Assess EEE parts, circuits, functions, components, subsystems, and systems to evaluate risks, effectiveness of mitigation strategies, and the ability to meet functional, performance, and reliability requirements during and after exposure to the mission ionizing radiation environment., • Lead or support screening and characterization test efforts for heavy ion, proton, and pulsed-laser Single-Event Effects (SEE), Total Ionizing Dose (TID), Enhanced Low-Dose Rate Sensitivity (ELDRS), Total Non-Ionizing Dose (TNID), Displacement Damage Dose (DDD), etc., • Create detailed radiation assessments, presentations, test plans, analyses, and reports., • BS degree in Electrical Engineering/ Materials Engineering / Aerospace Engineering/ Nuclear Engineering/ Physics in related radiation area from an accredited engineering school and a minimum of zero (0) years of related engineering experience, or a MS/ PhD in related radiation area with degree in Electrical Engineering / Materials Engineering / Aerospace Engineering/ Nuclear Engineering/ Physics from an accredited engineering school., • Experience with test hardware such as oscilloscopes, multi-meters, logic analyzers, function generators, electronic load banks, power supplies, power analyzers., • Familiar with systems engineering and integration (S&EI) and/or specialty engineering for NASA spaceflight (or similar complexity) with systems engineering and integration (S&EI) and/or specialty engineering for NASA spaceflight (or similar complexity)., • Experience with test hardware such as oscilloscopes, multi-meters, logic analyzers, function generators, electronic load banks, power supplies, power analyzers., • Prior experience in design and test of analog instrumentation systems, • Project based experience designing, building, testing, and troubleshooting power distribution electronics, battery systems, and other electrical hardware (requirements definition; system modeling and simulation; circuit analysis; PCB design, fabrication; requirements verification)., • Excellent fabrication, and assembly; harness fabrication; requirements verification)., • Excellent communication skills and the ability to work in a multi-disciplinary team of mechanical, electrical, and software engineers designing and building world-class, NASA spaceflight hardware., • Prior experience in design and test of power supply and conditioning systems., • Proficient in MS Office programs, particularly MS Project, Excel, PowerPoint, Word, and Outlook., • Competitive pay, • Positive work-life balance, • 100% Employer paid insurance including: Medical, dental, vision, life insurance, accidental death and dismemberment, short-term disability, and long-term disability, • 11 paid holidays annually, • Generous PTO, • 401k after 12 months of service with employer match, • Education assistance US Citizenship and the ability to pass a comprehensive security background investigation is required. Mclaurin is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law.

Job DescriptionPurpose of the position Ensuring that the quality and performance of products meet design requirements and user expectations. Through systematic testing processes, identify product defects, verify functional reliability, and assist in optimizing product design, resolve technical challenges, optimize production process, improve test efficiency. Duties and Responsibilities • Test readiness tracking and driven, lead product test line brings up and qualify (GRR, CPK analysis, Audit and calibration), report and get approval., • Test station/fixture sustaining maintain to ensure that test station/line is stable and smooth, to meet production target successfully., • Test bundle & SW regression/dry run/control run/report and cut in, test process control logic setup, verify, maintain., • Product test yield/retest/fixture downtime rate tracking and improvement., • Test major test issue/failure/retest issue FA, highlight and co-work with F1 TE and other test team., • UPH climbing support, GHLS and GHDS setting related maintenance., • Partner with cross-functional teams to implement root-cause analysis and corrective actions for defects or non-conformities., • Test process/coverage/TT/consumables life cycle optimization for cost reduction, participate in deploying automated system, digital system and predictive maintenance solutions. Education and work experience • Bachelor’s degree in Electronic information engineering, Electronic engineering, Mechanical Engineering, computer application technology, software engineering, or a related field. bachelor’s degree is a plus., • 3+ years of experience in server manufacturing engineering., • Lead to fix the technical issue, optimize the process and improve the yield/retest rate., • This position has several direct reports from manufacturing engineering crew members. Working conditions • This role is primarily based in a fast-paced, high-volume manufacturing facility, requiring daily presence on the production floor to oversee processes, troubleshoot issues, and ensure operational efficiency., • May require occasional weekend hours to support production deadlines, emergency repairs, or project implementations. Skills: • Software skills: Be able to use related test software and tools, such as test management software, data analysis software, Six Sigma, and statistical analysis tools;, • Programming language: Product test engineers need to be proficient in at least one programming language, such as Python, Java, or C/C++. These languages are very important in automated testing and help them write test scripts and tools;, • Ability to communicate effectively with developers to help fix problems found during testing., • Strong problem-solving, communication, project management abilities and good report ability. HGv1JrRE0D

Job Description Permanent, full-time, benefits eligible position. Purpose: Responsible for implementing and managing the Predictive Maintenance (PdM) Program to support the Texas and Mississippi manufacturing plants. Serves as the Mechanical Engineering subject matter expert and responsible for the Mechanical Integrity Program for these sites. Essential Job Functions: Use specific knowledge and expertise in reliability principles, analytics, equipment performance, and failure modes to initiate and drive focused equipment reliability improvements by supporting the following Zeon programs, initiatives, and processes. • Implement and manage a Predictive Maintenance program including vibration analysis, infrared, ultrasonic, and oil analysis., • Manage the existing Mechanical Integrity program. Work with maintenance leaders at both sites to ensure 100% compliance., • Manage the corporate risk insurance program and coordinate audits at both sites., • Work with site maintenance leaders to evaluate MI reports, Fitness for Service, and repair plans as necessary., • Maintain long term Equipment Asset replacement plan and ensure budget inclusion of major equipment in MI program., • Review and monitor rotating equipment conditions including vibration data, lube oil results, IR and Ultrasound data. Utilize critical operating process data to evaluate equipment health., • Manage ZCLP PdM and MI databases., • Perform analysis of equipment histories, maintenance costs and system failures; develop a refined asset management strategy., • Drive the Site Bad Actor Program and Metrics, • Provide relevant vibration, oil analysis, and other PdM data history to support root cause analysis efforts, • Manage 3rd party MI inspection services Contractors., • Support the Design for Reliability, Maintainability and Inspectability for new equipment related Projects and equipment designs and ensure all technical documents and supporting drawings, OEM Manuals and other support documents are presented at the commissioning of the Equipment. Ensure new or redesigned equipment is set up in SAP with Equipment Criticality Prioritization and Asset Strategies developed for all Critical Assets., • Report PdM and MI KPI’s for asset management including cost avoidance, cost savings, PdM monitoring compliance, and corrective actions in Reliance database., • Act as a resource in identification and correction of potential equipment problems., • Recommend and monitor continuous remote monitoring systems and applications., • Facilitate equipment root cause failure analysis / pro-active FMECA (RCM), • Recommend and implement PM optimization., • Lead Site Spare Parts Strategy based on Equipment Criticalities, lead times, benefit/cost vs. risk analyses., • Integrate use of Reliability Analytics and Modeling to analyze trends, build models and make projections for probability of failure and Mechanical Availability. Job Requirements: A successful candidate will possess the following qualifications: • Bachelor of Science Degree in Mechanical Engineering, • Minimum of 5 years’ relevant experience in predictive maintenance of rotating equipment with data analysis and database management in chemical/petrochemical facility., • Minimum of 5 years’ relevant experience in evaluating tank, piping and heat exchanger condition in accordance with ASME, API or STI standards., • Excellent communication skills, both written and oral., • Self-motivated, well organized, and possess strong interpersonal skills., • Willingness to perform “hands on” field work, including testing and troubleshooting., • Knowledgeable with respect to Microsoft Outlook, Excel and PowerPoint software programs., • Must have excellent time management skills and be able to multi-task effectively., • Ability to travel Benefits Zeon offers growth opportunities, a highly competitive salary and excellent benefits program. Benefits: Medical Insurance, Life Insurance, Dental Insurance, Vision Insurance, Paid Vacation, Paid Sick Days, Paid Holidays, Short Term Disability, Long Term Disability, 401K Plan w/Company match. Screening Requirements: Physical Exam including Drug Screen, Background Check. Zeon is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description Title: Mechanical Engineer Location: Fayetteville, NC Who we are: Voted one of the Nation's Best and Brightest Companies to Work for, Kuraray America, Inc. (KAI) is a global leader in specialty chemical, fiber, and resin production. With top-of-the-line research and production facilities and a vast network of supplies from around the world, Kuraray leads the industry in specialty dental, fiber, resin, and elastomer products. Kuraray America is a wholly owned subsidiary of Kuraray Company, Ltd. Based in Tokyo, Japan. Kuraray has operations in 31 countries and employs more than 11,000 employees, including over 800 in the United States. Why Kuraray: Kuraray is building a better tomorrow, today. Our team members are dedicated to expanding our business with committed professionals who share essential values such as integrity, excellence, teamwork, and accountability. As a part of Kuraray America, Inc., our team shares the advantages of working for the leader in specialty chemicals, resins, and fibers. Our international presence and resources allow us to be a world-leading innovator in the industries we service. Yet, despite our size, our people are more than just a number. As a new team member, you can expect to earn responsibility quickly. Our commitment to our people is visible in our comprehensive benefits package. As a Kuraray team member, you will have the opportunity to enjoy competitive salaries and benefits, incentive opportunities, and an excellent work environment. Position Summary: We are seeking a Mechanical Engineer to join our team at the Fayetteville, NC manufacturing facility-Kuraray's U.S. site in both the Troisifol and SentryGlas facilities. This role is responsible for ensuring the mechanical reliability and performance of plants equipment, with a strong focus on continuous running machinery, continuous improvement, and project execution. This is a hands-on engineering role, ideal for someone with a strong foundation in mechanical systems, IATF, ISO9001 and continuous running equipment, along with experience in regulated chemical manufacturing environments. Responsibilities: Mechanical & Reliability Engineering • Serve as a subject matter expert on continuous running equipment (e.g., pumps, hydraulics, extruders), performing troubleshooting, failure analysis, and performance optimization., • Lead and support reliability improvement projects focused on mechanical integrity, safety, and plant performance., • Conduct system sizing, material selection, and equipment specification reviews in alignment with plant needs and industry standards., • Prepare and update detailed P&IDs and mechanical drawings to support equipment upgrades and design modifications., • Partner with maintenance personnel during equipment overhauls, turnarounds, and outages; provide field engineering support as needed., • Contribute to or lead capital projects, including developing scopes, front-end design packages, and reviewing vendor documentation for mechanical systems., • Ensure proper installation and commissioning of new or upgraded mechanical equipment., • Analyze failure trends and equipment performance data to recommend improvements., • Maintain accurate records of repairs, inspections, and reliability metrics through SAP PM or equivalent CMMS tools., • Participate in Process Safety Management (PSM) activities, including Management of Change (MOC), Process Hazard Analyses (PHAs), and procedure reviews., • Ensure engineering solutions align with safety, environmental, and regulatory standards., • Recommend and implement technical advancements to enhance mechanical system performance and reliability., • Support operator and maintenance training related to mechanical systems., • Bachelor's degree in mechanical or industrial engineering required., • Minimum of 5 years of mechanical or Industrial engineering experience in a manufacturing environment., • Strong technical knowledge of rotating equipment, piping systems, and mechanical design principles., • Proven experience with troubleshooting, equipment specification, and working with vendors and repair shops., • Familiarity with PSM programs, including MOC and PHA processes., • Proficiency with Microsoft Office; experience with SAP PM or other CMMS platforms is preferred., • Strong communication and interpersonal skills with the ability to collaborate across departments and influence plant performance., • Working knowledge of industry codes and standards (API, ASME, etc.)., • Ability to prioritize work to manage multiple projects to meet deadlines., • Excellent problem-solving/decision-making skills., • Ability to multi-task, • Customer Focus, • Building strong customer relationships and delivering customer-centric solutions., • Business Insight, • Applying knowledge of business and the marketplace to advance the organization's goals., • Cultivate Innovation, • Creating new and better ways for the organization to be successful., • Action Oriented, • Taking on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm., • Ensures Accountability, • Holding self and others accountable to meet commitments., • Drives Results, • Consistently achieving results, even under tough circumstances, • Collaborates, • Building partnerships and working collaboratively with others to meet shared objectives., • Values Difference, • Recognizing the value that different perspectives and cultures bring to an organization, • Communicates Effectively, • Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences., • Courage, • Stepping up to address difficult issues, saying what needs to be said., • Instills Trust, • Gaining the confidence and trust of others through honesty, integrity, and authenticity., • Situational Adaptability, • Adapting approach and demeanor in real time to match the shifting demands of different situations. We offer a competitive compensation package that includes base pay and an annual incentive. This program is designed to reward individual performance and align overall rewards with corporate and team performance. Our employees benefit from a robust healthcare package that includes wellness reimbursements, along with generous perks such as three weeks of paid time off, ten company holidays, paid parental leave, education reimbursement, and a matching 401k plan, among other offerings. Applicants must be authorized to work for ANY employer in the U.S. Learn more at kuraray.us.com/careers/ Kuraray America, Inc. is an Equal Employment Opportunity/disability/protected veteran status No third-party candidates accepted. Job Posted by ApplicantPro

Job DescriptionPurpose of the position Foxconn Technology Group, a globally leading electronics manufacturing company, is now hiring a SMT Process Experiment Engineer. Lead reliability test analysis of SMT (surface mounting technology, Consumer Electronics Industry), such as cross secion/Dye&pry/shear/pull/torsion/FT-IR etc. Experimental anomaly analysis SMT process defects, such as void, crack, cold solder using SEM/EDS and optical microscopy, data support for process optimization and quality improvement and collaborate with DFM teams to improve designs based on failure mode data. Develop test methodologies for new materials (low temperature solders, Flex PCBs). Duties and Responsibilities 1. Lead SMT reliability test and analysis: such as cross-section, Dye&pry, shearpulltorsion, FT-IR etc., 2. Preparation SMT reliability test report, 3. Maintenance experimental equipment, 4. Manage and training operation technicians, 5. Optimize reliability test processes and methods to improve efficiency and accuracy, 6. Lead Line-qualification of SMT lines and progress tracking Education and work experience Educational Requirements: Bachelor's degree or above Work Experience (Nice-to-Have): Preference is given to those with relevant work experience, and outstanding recent graduates are also eligible to apply. Working conditions • Join a high-growth, innovation-driven team shaping next-gen consumer electronics., • Work at the intersection of engineering, automation, and global operations. cHfKZYSnX9

Job Description The Quality Engineer (BESS) serves as the primary technical authority for product excellence and reliability. You will bridge the gap between R&D and field operations, ensuring that BESS components (Batteries, Inverters, Controls) meet rigorous performance standards and "Quality by Design" principles before reaching the customer. Requirements • Quality by Design (QbD): Review product architecture and specifications to identify technical risks early in the development lifecycle; act as the "Quality Gate" for the Americas region., • Supplier Quality Engineering: Define and audit technical requirements for inverter and battery suppliers, ensuring grid-following and grid-forming capabilities meet strict reliability benchmarks., • Validation & Simulation: Oversee PSSE/PSCAD dynamic model reviews to validate that project designs will perform reliably under real-world grid conditions., • Standardization: Develop automated processes and "Gold Standard" configurations for system-level parameters to eliminate manual tuning errors and ensure consistency., • Root Cause & CAPA: Lead high-level Root Cause Analysis (RCA) and Corrective and Preventive Action (CAPA) for complex electrical failures, driving permanent engineering improvements., • Issues Triage: Serve as the front line for the quality intake systems and tasked with reducing ticket backlog and intake though the incorporation of lessons learned. Work to ensure tickets are properly assigned, prioritized, and evaluated for commercial risk. Use data analytics to review Non-Conformance Requests in the form of CAPAs, JIRAs, NCRs, and more., • Operational Excellence: Author SOPs and technical testing procedures that enable non-SMEs to execute complex tasks with zero-defect outcomes., • Advanced Degree: Bachelor’s or Master’s in Electrical Engineering or similar., • Domain Expertise: 10+ years in Power Systems/Electrical Engineering with a deep focus on Quality Management Systems (QMS) or product qualification., • Power Electronics Quality: 5+ years of experience in IGBT-based inverter performance testing and failure mode analysis., • Process Engineering: Proven track record in creating engineering calculators, internal design standards, and automated testing plans for BESS or Solar PV., • Systems Integration: Expertise in Modbus TCP controls and DC/AC systems with a focus on test-driven development (TDD) or automated validation., • Regulatory Mastery: Thorough working knowledge of NFPA, UL, and IEEE codes, viewed through the lens of compliance and risk mitigation., • Travel: Ability to travel 25% or more

Job DescriptionStructural Integrity Associates, Inc. (SIA) is currently looking for a Mechanical Engineering Consultant to join our Process Pressure Vessels team. This role would participate as part of a dynamic team in the engineering analysis, condition assessment, and life prediction of pressure vessels, piping, and auxiliary equipment used in upstream and downstream petroleum refining, petrochemical, and chemical industries. The position requires the individual to develop the skills to manage and coordinate the technical and administrative aspects of the work. They are expected to actively participate in both internal and external training, development programs, conferences, and trade shows. This position can be remote or based in one of SIA's offices. Responsibilities and Qualifications: Technical: • Perform evaluations related to design, life assessment, and root cause failure analysis of stationary equipment such as pressure vessels, piping, and storage tanks. Knowledge in the analysis of rotating equipment is a plus., • Perform thermal heat transfer and structural stress analysis of pressure vessels, piping systems, and other plant structures using both classic and finite element analysis methods. Knowledge in fluid mechanics is a plus., • Perform simple pressure vessel calculations using commercial software such as PV-Elite and/or Compress., • Perform calculations for fatigue, corrosion, and crack initiation and growth mechanisms and fracture mechanics concepts employed for serviceability assessment of damaged or flawed components., • Knowledge in materials, welding, and nondestructive examination techniques is preferred., • Assist with field inspections of plant equipment and development of risk-based inspection methods., • Mentor and train entry level engineers in stress analysis and life assessment techniques., • Mentor and train entry level engineers in application of various codes and standards including ASME & API, • Prepare and oversee the preparation of written technical reports and presentations., • Perform all work in accordance with SI’s Commercial Quality Procedures and with an acute awareness of client requests., • Develop and expand business opportunities with existing Structural Integrity clients and develop new clients., • Develop proposals for identified opportunities., • Support project managers in execution of large-scale projects., • Develop the skills to independently manage small-scale projects., • Ensure quality and enhance job skills by seeking peer review and appraisal., • B. S. or M.S. in Mechanical Engineering or similar discipline with 5-10 years or more industry related experience, • ASME Boiler and Pressure Vessel and Piping Code, specifically, Section VIII, Div. 1 through 3 and B31.3 Design & Analysis Experience is a plus., • Knowledge of SolidWorks CAD software, Abaqus FE software, and general fracture mechanics concepts. Piping stress analyses experience using CAESAR II is a plus., • Computer Programming experience is a plus., • Excellent written and oral communication skills are essential, as well as a working knowledge of computer software including Microsoft Office. About Us: SIA is an engineering consulting firm serving various industries including Nuclear Power, Energy Services, Pipeline Integrity, and Critical Infrastructure. Join a team of internationally recognized experts in a culture based on knowledge, excellence, and respect for one another. Our employees are members of a distinct community of internationally respected professionals committed to quality, engineering innovation and a shared goal of building a safer world Why Work at SIA? SIA offers a competitive salary and performance-based bonus program. Our retirement benefits include a Traditional 401k, Roth 401k, and an employer match. To help employees maintain a work-life balance, SIA also offers various paid time off including vacation, floating holidays, sick time, and parental leave. Our employees also enjoy a comprehensive benefits program that includes the following: • Medical, dental, and vision insurance, • Life Insurance and AD&D, • Short-term and long-term disability, • Health Savings Account with employer contribution, • Flexible Spending Account for health care and dependent care SIA does not welcome third-party recruiters, employment agencies, headhunters, etc. Please do not reach out to SIA employees requesting a call, sit down, meeting, or email response. Powered by JazzHR Ari0vO9Exp

Job DescriptionTest Engineer Location: Houston, TX, United States Employment Type: Full-time, On-Site Overview: Test Engineers are responsible for designing and implementing tests to ensure the product functions to meet high-quality standards via developing test plans, peer reviewing code, observing current processes, and testing materials through processes. Test Engineers work primarily in a Linux Shell, maintaining, diagnosing, and troubleshooting firmware. Duties and Responsibilities: • Develop and formulate testing steps for product., • Install, configure, troubleshoot, and maintain test equipment, server, and network., • Evaluate and research on product automation test fixtures., • Collaborate with NC team and IT team to finalize testing process and network setup., • Validate API program for auto-testing results upload., • Regularly communicate with customer to ensure product P/N testing steps and ECN implementation., • Work with Asia team to introduce new product with FAI results for NPI readiness review., • Provide findings of testing yield and failure units analysis and release SOP product testing steps to operator., • Participates in cross-group collaboration and corporate initiatives, aiming to improving corporate competitiveness, service quality, and costs., • Conduct project management training of best practices in order for projects and operations to run smoothly and effectively., • Attend conferences and training as required., • Three (3) or more years working with Python in a professional environment is preferred., • Three (3) or more years working with Bash in a professional environment is preferred., • Three (3) or more years developing or Testing firmware in a professional environment is preferred., • Experience in Linux shell (RHEL, CENT, CLES, or Ubuntu) is preferred., • Proficient computer skills in Microsoft Office., • Strong organizational skills for planning, multitasking, and managing time effectively., • Attention to detail., • Exceptional verbal and written communications., • Bachelor’s degree in Electrical and Electronic Engineering, Information Management, Information Engineering, or Computer Science is preferred. LuVRJDHtUh

Job DescriptionPurpose of the positionFoxconn Technology Group, a globally leading electronics manufacturing company, is now hiring a SMT Process Experiment Engineer. Lead failure mode experiment analysis of SMT (surface mounting technology, Consumer Electronics Industry), such as Cross-section/Dye & pry / Thrust & Pull/ Torsion etc. Experimental anomaly analysis SMT process defects, such as void, crack, cold solder using optical microscopy, data support for process optimization and collaborate with DFM teams to improve designs based on failure mode data. Develop test methodologies for new materials (low temperature solders, Flex PCBs)Duties and Responsibilities1. Lead SMT failure mode experiment analysis: such as Cross-section, Dye &pry, Thrust-pull\Torsion etc. 2. Preparation SMT failure mode experiment analysis report 3. Maintenance experimental equipment 4. Manage and training operation technicians 5. Optimize failure mode experiment analysis processes and methods to improve efficiency and accuracy 6. Support Line-qualification of SMT lines and progress tracking Education and work experience Educational Requirements: Bachelor's degree or above The best major in electronics,mechanical enigerring, chemistry and physics. Work Experience (Nice-to-Have): Preference is given to those with relevant work experience, and outstanding recent graduates are also eligible to apply. Working conditions • Join a high-growth, innovation-driven team shaping next-gen consumer electronics., • Work at the intersection of engineering, automation, and global operations., • Be part of a diverse, bilingual team with strong cross-Pacific collaboration., • Typically 8–5 core hours with flexibility, though project deadlines may require occasional overtime., • Modern, collaborative offices or labs with flexible setups emphasizing innovation and teamwork.Skills:, • The process is familiar with the experimental method and step TRilRN7g2z

Job Description S-E-A is a forensic engineering firm with over 50 years of experience serving as a neutral, third part subject expert, analyzing technical failures. Our engineers reverse engineer and look for the "why" when things fail. Prior forensic industry experience strongly preferred. Essential Job Functions & Responsibilities: • Conduct field investigations and analyze failures involving all types of structures and construction problems including residential, commercial and industrial properties, • Determine of the cause, origin, and extent of structural failures, water intrusions, construction defects and building system failures including envelope, roof, wall and glazing, • Assignments may include foundation settlement investigations, structural assessments, site evaluations, sub-surface investigations, vibration analysis, construction site accidents and building egress accident evaluations, • Analyze failures in buildings and other infrastructure systems by conducting site visits and applying engineering principles and practices in accordance with codes and industry standards, • Conduct unbiased investigations for various types of clients, • Responsible for retention and development of client relations, • Prepare oral and written reports in layman's terms that document causes of failure, extent of loss, and recommended remediation, • Deliver professional presentations, develop client relationships and promote self to client groups, • Ability to support conclusions by appropriate expert testimony in legal proceedings, • Ability to accept and integrate constructive feedback into job performance, • Maintain professional and technical knowledge by attending educational workshops, reviewing professional publications, establishing personal networks and participating in professional societies Position Requirements: • Bachelor's degree in Civil or Structural Engineering required, Master's degree a plus, • A minimum of seven years of post-academic civil/structural experience, • P.E. (Professional Engineer) registration required through testing in Texas, or ability to obtain Texas P.E. within 6 months, • Must possess strong writing skills, • Public speaking experience a plus, • Exceptional interpersonal and communication skills Physical Requirements: • Ability to travel 25% of the time, • Ability to lift 50 lbs, • Ability to climb ladders and inspect roofs, • Ability to carry equipment to and from job sites, • Ability to work at various heights on structures, • Ability to maneuver in and around buildings and in confined spaces, • Ability to effectively communicate verbally and in writing, • Ability to effectively communicate with clients and colleagues, • Ability to drive in all conditions, • Ability to fly on airplanes, • Ability to visually inspect job sites and relevant artifacts, • Ability to wear personal protective equipment as required by the work site

Job DescriptionDescription: Reliability Consultants to provide deep asset reliability expertise to clients across the chemicals industry. The role focuses on improving equipment reliability, asset availability, mechanical integrity, and plant stability across batch, continuous, and specialty chemical operations. Consultants will assess existing reliability practices, identify performance, and risk gaps, and implement best-in-class reliability strategies, standard work, and digital / AI-enabled tools to deliver sustainable improvements in asset integrity, cost, unplanned downtime reduction, and overall manufacturing performance. Key Responsibilities Reliability Excellence Assessment & Roadmap Definition • Independently assess asset reliability, and mechanical integrity practices across batch, continuous, and specialty chemical operations., • Benchmark site performance against industry best practices and peer operations to identify gaps and improvement opportunities., • Develop fact-based reliability excellence roadmaps, prioritizing initiatives based on risk, value, and ease of implementation., • Provide objective, data-driven insights to client leadership on reliability risks, cost drivers, and asset performance. Asset Performance & Reliability Improvement Implementation • Lead or support implementation of reliability improvement initiatives, including asset criticality, failure mode management, and risk-based maintenance strategies., • Identify and eliminate chronic equipment issues and systemic causes of unplanned downtime., • Align operating discipline, maintenance practices, and execution routines to improve plant stability and asset life., • Translate recommendations into practical, site-ready actions with clear ownership and timelines. Mechanical Integrity, Safety & Risk Assurance • Review and strengthen Mechanical Integrity and reliability-related PSM elements, including inspection regimes, MOC, PSSR, and asset risk management., • Conduct field audits, maintenance walkdowns, and failure investigations to identify integrity and safety risks., • Provide independent challenge and assurance that reliability improvements are implemented safely and in compliance with site and regulatory requirements., • Support closure and sustainability of corrective and preventative actions. Reliability Analytics, KPIs & Performance Control • Assess reliability data quality and usage across CMMS/EAM, downtime systems, and condition monitoring tools., • Define and implement reliability KPIs, dashboards, and governance routines to support sustained performance management., • Quantify and track benefits from reliability initiatives, including reductions in downtime, maintenance cost, and operational risk., • Provide transparent reporting to site and corporate leadership on progress and impact. Maintenance Strategy, Turnarounds & Execution Excellence • Review and optimize maintenance strategies, planning, and scheduling to improve execution effectiveness and wrench time., • Support turnaround and shutdown assessments, readiness reviews, scope optimization, and post-event learning., • Embed lessons learned into standard work and future maintenance strategies. Digital Enablement & Capability Transfer • Assess and deploy digital and AI-enabled reliability tools (CMMS/EAM optimization, predictive analytics, condition monitoring) to improve decision-making., • Transfer knowledge through coaching, training, and development of standard work to ensure sustainability post-engagement., • Education: Bachelor’s degree in chemical engineering or a closely related field. A master’s degree is a plus., • Certifications: CMRP (Certified Maintenance & Reliability Professional) or CRL (Certified Reliability Leader) preferred. Experience: • Minimum 8+ years of experience in chemical manufacturing (petrochemical, specialty chem, or refining), with a strong emphasis on asset reliability, maintenance engineering, or reliability engineering roles within batch or continuous process environments., • Hands-on experience working closely with operations and maintenance, including time spent in plant/area engineering, reliability engineering, maintenance leadership, or rotating equipment roles supporting day-to-day plant performance., • Strong background in reliability fundamentals, including asset criticality analysis, failure modes and effects analysis (FMEA), RCFA, preventive and predictive maintenance strategies, and reliability data analysis., • Direct involvement in turnarounds, shutdowns, and major maintenance events, including scope development, job planning, execution support, risk management, and post-event performance review., • Demonstrated ability to drive reliability and asset performance improvements, such as reduced unplanned downtime, improved equipment availability, maintenance cost optimization, and increased mean time between failures (MTBF)., • Proven track record of delivering measurable improvements in reliability, safety, and cost through improved maintenance strategies, work management, spare parts optimization, and collaboration with operations., • Familiarity with PSM requirements and mechanical integrity programs, including MOC, HAZOP/LOPA interfaces, inspection regimes, safe work practices, and disciplined asset lifecycle management in a regulated chemical environment. Technical Skills: • Strong knowledge of chemical plant reliability and maintenance practices, including asset criticality, mechanical integrity programs, preventive and predictive maintenance, work management, and reliability-centered maintenance (RCM)., • Working knowledge of core chemical processes (e.g., reaction, distillation, crystallization, polymerization, separation, drying, blending) with an understanding of how process conditions and operating discipline impact equipment health, failure modes, and asset life., • Familiarity with PSM and Mechanical Integrity requirements, including PHA/HAZOP interfaces, MOC, PSSR, inspection and testing regimes, and safe work practices in regulated chemical environments., • Experience with reliability-focused digital tools, such as CMMS/EAM systems (SAP, IBM Maximo, Infor/Hexion, etc), condition monitoring and predictive analytics, mobile maintenance execution, reliability dashboards, and visual management of asset performance. Soft Skills: • Exceptional analytical and problem-solving skills., • Strong written and verbal communication skills, including the ability to present complex technical information to non-technical stakeholders., • Ability to work independently and as part of a global, multi-disciplinary team., • Willingness to travel extensively to client sites.

Job Description Position: Customer Quality Engineer Location: Houston, TX & Guadalajara, MX Amphenol High Speed Products Group is the market leader for high speed, high bandwidth electrical connectors for the Telecom/Datacom market (Mobile Networks, Storage, Servers, Routers, Switches, etc.). Our products help to enable the electronics revolution and remain a key enabler for all the major Tier 1 OEMs globally. We have design, sales, and manufacturing locations globally and are currently seeking a Customer Quality Engineer to join our Cable Backplane Solutions team located in Houston, TX or Guadalajara, MX. RESPONSIBILITIES: We're hiring a Customer Quality Engineer (CQE) to be the primary technical interface between our customers and internal teams on all product quality topics. You'll lead customer issue resolution, drive corrective and preventive actions, analyze data to spot trends, and champion the Voice of the Customer (VoC) across design, manufacturing/operations, and support. Your work reduces defects and escapes, improves customer satisfaction, and protects our reputation in market. • Customer Advocacy & Communication, • Serve as the customer-facing owner for quality topics, ensuring timely, clear, and professional updates on issues, risks, and resolutions., • Translate customer feedback (VoC) into actionable requirements, defect reports, and improvement projects., • Manage customer portals/scorecards, track performance, and coordinate responses to audits and surveys., • Issue Management & Root Cause, • Lead structured problem solving (8D, 5 Whys, Ishikawa/Fishbone, DMAIC) for customer complaints, field returns, and escalations., • Own CAPA lifecycle (containment, root cause verification, corrective & preventive actions, effectiveness checks)., • Define and track SLAs/SLOs for response and resolution; escalate risks early., • Quality Planning & Risk Control, • Partner with Design/Engineering, Manufacturing/Operations, and Supplier Quality to prevent recurrence and design in quality., • Maintain risk artifacts (e.g., FMEA, Control Plans, APQP); ensure change control and deviation/waiver handling reflect customer commitments., • Manufacturing/Hardware - SPC, MSA/Gage R support first-article inspections and process validations., • Data, Metrics & Continuous Improvement, • Build and maintain dashboards for DPPM/PPM, defects per release, complaint rate, escape rate, turnaround times, warranty/return trends, and customer scorecards., • Identify and prioritize systemic improvements that reduce variation, cycle time, and cost of poor quality (COPQ)., • Collaborate with Supplier Quality on supplier-caused issues impacting customers; ensure closed-loop corrective action., • Compliance & Audits (as applicable), • Lead Gemba walks and introduce 5S methods Must-Have • Bachelor's degree in Engineering (Mechanical, Industrial, Manufacturing, Electrical, Quality) or closely related field; or equivalent experience., • 37+ years in quality engineering or customer-facing technical roles with direct ownership of escalations and CAPA., • Demonstrated expertise in root cause analysis (8D, 5 Whys, Ishikawa), corrective actions, and data-driven decision making., • Strong communication skillsable to engage customers credibly, synthesize technical detail, and influence cross-functional teams., • ASQ CQE, Six Sigma Green/Black Belt, or Certified Internal Auditor (ISO 9001)., • Experience with APQP, PPAP, FMEA, Control Plans, SPC, and MSA (manufacturing) or with incident postmortems, SLAs/SLOs, defect triage, and telemetry/observability (software)., • Familiarity with customer portals and enterprise systems (e.g., Salesforce/Service Cloud, ServiceNow, JIRA)., • Customer-first mindset with excellent follow-through and accountability., • Analytical, organized, and calm under pressure; skilled at prioritizing multiple issues., • Confident facilitator able to align cross-functional teams on corrective plans and timelines.

Job DescriptionPurpose of the position The Quality Engineer is a professional who understands the principles of product and service quality evaluation and control. This body of knowledge and applied technologies include, but are not limited to, development and operation of quality control systems, application and analysis of testing and inspection procedures, the ability to use statistical methods to diagnose and correct improper quality control practices, an understanding of human factors and motivation, facility with quality cost concepts and techniques, and the knowledge and ability to develop and administer management information systems and to audit quality systems for deficiency identification and correction. This position will be responsible for the implementation, use, compliance and maintenance of quality systems and tools including the Quality Management System. Duties and Responsibilities： • Define the quality control plan and audit the implement status of quality control plan, • Works with cross-functional teams to prioritize key site projects and determine appropriate resources and timing; integrate activities using quality principles such as lean Six Sigma with Quality Management System activities such as Corrective and Preventive Action (CAPA) and Quality Improvements to assure effectiveness and compliance to customer and regulatory requirements., • Evaluates performance of current operational Quality and Quality Engineering methods (e.g., failure investigation, measurement systems analysis, process development, etc.) and drives best practices throughout the business and transfers that knowledge across the business, as appropriate., • Reports significant issues or developments identified during Quality activities and provides recommended process improvements to management., • Becomes proficient in the various business systems used at First Quality, including MES, quality data collection systems and understands how the systems are integrated with each other and within the businessEducation and work experience, • Bachelor’s degree in Engineering discipline or a technical field with 2 years of quality or manufacturing experience required., • Three or more years in quality or manufacturing engineering strongly preferred., • Highly qualified candidates would have an advanced degree in Analytics and/or ASQ CQA or CQE certification, and/or Lean or Six Sigma certification, • Experience in technical problem solving, statistical analysis, and quality auditing preferred.Working conditions, • Office-based role, fast-paced work environment, • This position must be able to respond to after-hour emergencies and be available to work non-core hours or overtime to complete various projects without interruption to operations.Skills:, • Having 2 years working experience of process analysis and handling customer complaint SMT area., • Ability to use English as working language to communicate with customer, and proficient in reading, writing and speaking English., • Familiar with applying quality control techniques to analyze and complete PPT report., • Good quality awareness and interpersonal communication skills., • Strong knowledge of MS-Office products and proficiency in Mini Tab dQ6Je39oBF

Job Description Your Role at a Glance Planning • Plan, evaluate, organize, and implement installation, maintenance, and repair activities to minimize production downtime and maximize employee safety., • Coordinate maintenance activities with other departments to ensure smooth execution., • Implement and support the Computerized Maintenance Management System (CMMS), specifically SAP., • Maintain maintenance project schedules for rebuilds, small OPEX projects, and scheduled down days., • Monitor project progress, coordinate activities, and resolve issues to keep projects on track., • Prepare project status reports by collecting, analyzing, and summarizing data and trends., • Drive Total Productive Maintenance (TPM) strategies using:, • Root Cause Analysis (RCA), • Preventive Maintenance Optimization (PMO), • Predictive Maintenance (oil analysis, motor signature analysis, thermography, vibration analysis), • Manage predictive maintenance programs including thermal scanning, ultrasonic testing, and vibration monitoring., • Analyze predictive maintenance data to ensure proper preventive maintenance activities are executed., • Work with maintenance supervisors to ensure Professional Maintenance (PM) tasks are completed to high standards., • Lead and perform Failure Mode and Effects Analysis (FMEA)., • Conduct root cause analysis and implement sustainable countermeasures., • Review engineering specifications and design modifications for reliability and maintainability., • Maintain equipment performance records using SAP., • Prepare and maintain technical documentation including data sheets, wiring diagrams, and P&IDs., • Support the Master Asset Renewal Plan (MARP) throughout the asset life cycle., • Participate in design, installation, commissioning, and acceptance testing of new equipment., • Develop acceptance tests and inspection criteria for new installations., • Contribute to risk management plans addressing reliability‑related and non‑reliability risks., • Develop engineering solutions to repetitive failures and operational issues involving capacity, quality, cost, or compliance., • Apply analytical tools such as:, • Statistical Process Control, • Reliability modeling and prediction, • Fault Tree Analysis, • Weibull Analysis, • Work with Production to analyze:, • Asset utilization, • OEE, • Remaining useful life, • Operating condition and cost drivers, • Review projects for continuity, completeness, and alignment with reliability goals., • Assist with capital project management as needed., • Maintain communication with all project personnel and stakeholders., • Determine project staffing needs in coordination with supervisors and managers., • Use staffing charts to track progress and maintain project timelines., • Supervise project staff and delegate technical tasks appropriately., • Continuously evaluate the workplace for safety concerns and support behavioral safety initiatives., • Enforce plant rules, safety regulations, and 5S housekeeping standards., • Work with Maintenance and Production Managers to manage OPEX funds., • Support Autonomous Maintenance by training operators and ensuring equipment basic conditions are maintained. We’re looking for individuals who bring the right mix of experience, mindset, and motivation: • Strong working knowledge of TPM, RCA, predictive and preventive maintenance systems, and visual plant concepts., • Excellent communication and interpersonal skills., • Proven planning and organizational abilities., • Strong leadership with a sense of ownership and results orientation., • Working knowledge of Six Sigma/Lean Manufacturing (or willingness to learn on the job)., • Experience in continuous manufacturing environments., • Strong analytical and problem‑solving skills., • Ability to work effectively in a team‑based environment., • Project management, • Safety management, • CAD proficiency Bachelor’s degree in one of the following: • Reliability Engineering, • Mechatronics Engineering, • Mechanical Engineering Success in this role is driven by a strong mix of personal ownership, collaboration, and continuous improvement. We value team members who: • Communicate clearly and constructively, • Collaborate effectively and contribute to team success, • Adapt to change with a positive, proactive mindset, • Take accountability and show initiative in their work, • Demonstrate reliability and pride in performance, • Prioritize safety and act with awareness, • Embrace feedback and use it to grow, • Maintain high attention to detail, • Drive continuous improvement and challenge the status quo We’re committed to helping you thrive- on the job and beyond. That’s why we offer a collaborative culture where your ideas drive real change, and career mobility within a stable, essential industry. To support your growth and well-being, we also provide a comprehensive and competitive benefits program, including: • Medical, Dental, and Vision Coverage, • Company-Paid Life Insurance & Short/Long-Term Disability, • Profit Sharing: Up to 4%, • 401(k): Company match 4.5% with no vesting period, • Paid Parental Leave: For birthing and non-birthing parents, including adoptions, • Paid Holidays: 10 days, plus 1 personal floating holiday, • Paid Vacation Time, • Performance-Based Bonus Program

Job Description Reliability Engineer/Mechanical Engineer Ingenia Polymers is a world-class, fast-growing, global company looking for people that have the passion to lead, the desire to grow, and the ability to create and deliver solutions for our customers. We offer an environment that is innovative, diverse, intellectually stimulating, and unique. We are searching for an exceptional professional, detailed oriented with strong analytical and interpersonal skills to perform the role of Mechanical/Reliability Engineer at our Houston and La Porte, Texas US manufacturing facility. A Reliability Engineer will have a deep interest in data and numbers, often collecting and analyzing key data metrics from processes or components. From here, he/she can create statistical analyses, charts, drawings, and reports to help illustrate and showcase potential issues within a product lifecycle or business process and how to improve it. Many of these issues involve taking a macro look at other factors and helping businesses make the best decisions. Typical daily tasks but not limited to: • Identifying and reporting on potential failures within a process, • Designing new systems, • Applying general engineering knowledge to solve problems., • Performing tests and analysis, • Check new systems or installations., • Work closely with budgets and finances to help reduce costs., • Conduct routine engineering calculations., • Liaise with relevant teams on outcomes of tests/analysis. Common forms of analysis: • Failure mode and effects analysis (FMEA), • Reliability hazard analysis, • Dynamic reliability block-diagram analysis, • Fault tree analysis, • Root cause analysis, • Accelerated testing, • Avoidance of single point of failure (SPOF), • Functional analysis and functional failure analysis (e.g., function FMEA, FHA or FFA), • Testability analysis, • Human error analysis, • Operational hazard analysis, • Preventative/Planned Maintenance Optimization (PMO), • Manual screening Job Qualifications: • Mechanical or Chemical Engineer with Maintenance background is REQUIRED. Bachelors or Masters in Control Engineering is preferred., • Strong background in equipment troubleshooting, process optimization and production controls such as SPC and DCS., • Strong mechanical aptitude and high interest in working in a manufacturing environment. Willingness to get involved in the Production and Maintenance operation at all levels., • Ability to work in a multitasking, multi-role and fast paced environment., • Must be proficient in Microsoft Office including VBA and macros, AutoCAD, PLC controls and programming software, SolidWorks experience would be an asset., • Strong customer/vendor interaction and interpersonal skills., • SAP experience., • Willing to occasionally, as needed, work outside of normal business hours to troubleshoot problems and facilitate projects., • Experience in plastics manufacturing, especially extrusion, equipment design, process development, and polymer science is preferred. The company offers a competitive comprehensive salary and benefit program including medical, dental, vision, life, long-term disability insurance and 401K. To learn more about our company please visit our website: If you are seeking a career in a challenging environment with opportunities for career advancement, please apply now. Note: We thank all applicants for their interest, however only those applicants being considered will be contacted for an interview. Please do not make telephone inquiries.

Job Description The Sr. Technical Engineer plays a critical role in leading and managing the technical aspects of industrial projects involving refractory installations, corrosion protection, rubber lining applications and scaffolding systems. This position is responsible for developing engineered solutions, overseeing technical execution, ensuring compliance with industry and customer standards, and providing mentorship to others. The role requires deep expertise in materials science, heat transfer, stress analysis and industrial construction methods as well as a practical understanding of the harsh, corrosive and high temperature environments found in industries such as petrochemical, refining, incineration, power generation, gas, liquids & minerals processing and steel manufacturing. Role and Responsibilities • Lead the design, specification, and technical oversight of refractory linings, corrosion protection systems, rubber linings, and scaffolding structures., • Collaborate with project managers, estimators, and clients to develop technical scopes of work, project plans, and material selections., • Analyze engineering drawings, specifications, and customer requirements to ensure technical solutions align with project objectives and safety standards., • Provide technical support and troubleshooting guidance during project execution, both remotely and on-site., • Conduct inspections, quality checks, and failure analyses for ongoing and completed projects., • Support procurement in evaluating material specifications, vendors, and subcontractor capabilities., • Stay up to date with applicable codes, standards (e.g., ASTM, API, NACE, OSHA), and best practices in industrial applications., • Participate in root cause analysis and provide recommendations for design or process improvements., • Prepare and present technical documentation, reports, and client-facing communications., • Mentor and train junior engineers and technicians in technical procedures and safety practices., • Bachelor’s degree in Mechanical Engineering or a related field. Master’s degree preferred., • Minimum 7–10 years of experience in an industrial services environment, with direct experience in refractory, corrosion, rubber lining, or scaffolding systems., • Professional Engineer License is a plus, • Strong understanding of materials used in high-temperature, chemical, and abrasive environments., • Proficiency in engineering software (e.g., AutoCAD or equivalent)., • Familiarity with scaffolding load calculations and design requirements., • Working knowledge of QA/QC procedures, inspection techniques, and documentation practices., • Excellent communication skills with the ability to interface effectively with cross-functional teams and clients., • Willingness to travel, as needed (domestic and/or international)., • Field Mobility: Ability to move around construction and industrial job sites, including climbing ladders, scaffolding, and accessing confined spaces, elevated platforms, and uneven surfaces., • Manual Dexterity: Capable of using hand tools and testing equipment, and handling materials or samples during inspections and assessments., • Physical Stamina: Able to stand, walk, or remain on foot for extended periods during field inspections or supervision, often in hot, dusty, or chemically exposed environments., • Lifting Requirements: Must be able to lift and carry equipment or materials up to 50 pounds occasionally., • Environmental Tolerance: Ability to work in extreme conditions including high heat (near kilns or furnaces), humidity, noise, dust, fumes, and chemicals while wearing appropriate PPE., • Vision and Hearing: Visual acuity (with or without correction) sufficient to read technical drawings, operate computers and field equipment, and perform visual inspections. Adequate hearing (with or without aids) to detect alarms, communicate in noisy environments, and participate in safety briefings., • PPE Usage: Must be capable of wearing and working in full personal protective equipment (PPE), including hard hats, safety glasses, gloves, flame-resistant clothing, steel-toed boots, respirators, and fall protection harnesses when required., • Travel and Field Work: Willingness and ability to travel to remote job sites, sometimes on short notice, and work extended hours or shifts based on project demands. The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training, and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Employment at Thorpe Specialty Services Corporation is on an “at-will” basis. There is no contract of employment between Thorpe Specialty Services Corporation and anyone or all its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Thorpe Specialty Services Corporation and its affiliates provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Are you passionate about human space exploration, understanding the origins of the universe, and working with a passionate and diverse team to make a difference? If you are, we need you! We need your talent, teamwork, and energy to help us achieve great things that inspire people all over the globe. We need you to bring creative ideas and diverse backgrounds to help us envision, shape, and deliver systems that will enable the exploration of space while benefiting people here on Earth. We are excited about what we do, and we need you on our team as we take on exciting challenges for NASA's pursuits in deep space exploration. We have an exciting opportunity for a Project Engineer - Spaceflight Hardware to join our JETS II contract team at NASA Johnson Space Center in Houston, TX. If selected you will: • Provide test support., • Prepare and close test paperwork., • Maintain and ensure baseline test configuration and document any configuration changes., • Organize and track inventory., • Plan and execute hardware troubleshooting to investigate failures within hardware or test support hardware., • Coordinate with test facilities (i.e. Vibration Test Facility) as needed., • Coordinate flight logistics as flight articles are prepared for launch to the International Space Station (ISS)., • Generate essential paperwork and documents for tasks assigned, such as Task Performance Sheets (TPS), Discrepancy Reports (DR), and Detailed Test Procedures (DTP), as needed., • Work in a collaborative, team environment and report to project manager for technical support, task assignment, and processes., • Perform job functions based on pre-established guidelines or instructions. This position has been posted at multiple levels. Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. • Typically requires a bachelor's degree in Engineering and a minimum of 2-5 years of experience in the field or in a related area., • BS degree in engineering from an accredited engineering school., • Experience with hardware testing., • Ability to work autonomously when required., • Self-motivated, team player with adaptability to a dynamic environment and the ability to complete all assignments as required., • Ability to prepare written documents and to verbally present at various meetings., • Must have the ability to visualize and work with complex systems and work with others in problem solving as part of a team., • Familiarity with Microsoft Office products., • Willing to work off hours/alternative shifts when running tests or supporting flight operations., • Experience with the design, assembly, verification, testing, and operation of space hardware., • Familiarity with common hand tools and proficiency using them to perform assembly, disassembly, and troubleshooting on electrical systems., • Prior experience with hardware anomaly troubleshooting and failure analysis., • Experience with procedure development., • Co-op or Intern experience at JSC or other NASA agency., • Prior experience working and coordinating requirements with third party/outside vendors., • Competitive pay, • Positive work-life balance, • 100% Employer paid insurance including: Medical, dental, vision, life insurance, accidental death and dismemberment, short-term disability, and long-term disability, • 11 paid holidays annually, • Generous PTO, • 401k after 12 months of service with employer match, • Education assistance US Citizenship and the ability to pass a comprehensive security background investigation is required. Mclaurin is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law.

Job Description We are seeking a proactive and detail-oriented Quality Engineer Assistant to support our Out of Box Audit (OBA) and manufacturing quality activities. In this role, you will actively contribute to failure analysis, corrective action implementation, inspector certification, and cross-functional quality improvement initiatives within a high-volume production environment. This position is ideal for a technically skilled professional with strong analytical capabilities and hands-on experience in testing systems and quality processes. Key Responsibilities OBA & Inspection Support * Support and oversee daily activities of the OBA (Out of Box Audit) team * Supervise onboarding and certification of OBA inspectors * Regularly evaluate inspector competency levels and deliver training on new processes * Provide direct technical guidance to the OBA team when required Failure Analysis & Corrective Actions * Initiate and lead immediate root cause analysis of OBA and test-related defects * Collaborate closely with Engineering, Test Engineering, and Quality teams * Define the scope of potentially affected products * Propose corrective and preventive actions to eliminate recurrence * Verify effectiveness and ensure no unintended product impact Reporting & Quality Monitoring * Maintain and review OBA defect database accuracy * Prepare and update analysis reports, especially in case of line-stopping issues * Monitor key performance indicators, including: * OBA-related defect ratio * Recurrence rate of defects * Inspector certification status MRB & Test Coordination * Support MRB (Material Review Board) technicians in analyzing production fallout * Ensure appropriate test methods are applied * Align testing methodologies with Test Engineering Cross-Functional Communication * Maintain continuous communication with Quality and Test Engineering * Provide clear updates on analysis results and improvement actions * Escalate issues to the Quality Manager when required Qualifications & Experience * Technical (Technician-level) qualification * Several years of experience with production test systems (e.g., IBM, Lenovo environments preferred) * Strong hands-on knowledge of manufacturing testing processes * Solid understanding of Quality Management Systems (ISO 9001) * Knowledge of Environmental Management Systems (ISO 14001) is an advantage * Basic English language skills Key Competencies * Strong analytical and structured problem-solving skills * Ability to conduct thorough and consistent root cause investigations * Proactive and improvement-driven mindset * High stress tolerance and adaptability in a fast-paced manufacturing environment * Strong administrative skills, including proficiency in Microsoft Office and document control systems * Excellent communication and collaboration skills * Commitment to continuous professional development What We Offer * Opportunity to work in a dynamic manufacturing environment * Cross-functional exposure within Quality and Engineering * Professional development and certification support * Competitive compensation package Powered by JazzHR zQnpCMe26s

Production Support: The Manufacturing Technician ensures the proper operation of assigned production processes. Quality: Ensure proper manufacturing, handling, testing, failure analysis, and repair of products, striving for the highest quality standards.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Paid time off, • Disassemble, inspect, and evaluate rotating equipment such as centrifugal pumps, gear pumps, and related components per API 610/682/685 standards., • Perform precision measurements and record clear inspection data to support accurate failure analysis and repair planning., • Assemble and test pumps and equipment following manufacturer specifications and Progressive Pumps quality standards., • Operate shop machinery safely, including lathes, mills, presses, and grinders., • Maintain and calibrate shop tools and equipment as required., • Support continuous improvement efforts related to shop safety, quality, and efficiency., • Follow and enforce all company safety policies and procedures., • Maintain cleanliness and organization per 5S standards., • Accurately complete documentation such as job travelers, inspection reports, and test data sheets., • Assist in maintaining shop inventory of tools, equipment, and consumables., • Communicate effectively with Planning and Engineering teams regarding scope of work and equipment conditions., • Support training of junior mechanics and apprentices when needed., • Strong knowledge of pump types, components, and repair procedures under API standards., • Skilled in using precision measuring tools (micrometers, calipers, dial indicators, etc.)., • Ability to interpret mechanical drawings, assembly prints, and schematics., • Competence in documenting inspection results and job data., • Good computer literacy (Word, Excel, Outlook)., • Effective communication and teamwork skills. 1. Prolonged Standing, 2. Walking, Kneeling, Bending, twisting, 3. Hand and eye Coordination, 4. Ability to lift 50 lbs, 5. Must be willing and able to work OT as needed

Job Description OMB NO: 1625-0120 Expiration Date: 01/30/2025 Announcement: 6693 Opening Date: 23 March 2026 Pay Plan/Series/Pay Band: NF-1101-03 Closing Date: Until Filled Work Schedule: Full-Time Position: Hourly Store Manager I Salary: $20.00-21.50+ DOE Depending on Experience Who May Apply: All Sources Location: Houston, TX- Ellington Field Exchange Join the Coast Guard Exchange — Make Every Day Meaningful! Ready to put your passion to work for the men and women who protect our nation? The Coast Guard Exchange is offering a rare chance to step into a retail role with purpose — and with an unbeatable schedule: Monday–Friday, 7:30 a.m.–3:30 p.m. No weekends or late nights. Just balance, stability, and impact. This isn’t just another job. It’s your opportunity to support the heroes who safeguard our shores, strengthen our communities, and keep our country safe. Every interaction you have helps honor their service and makes a real difference in their day. If you’re energized by meaningful work, inspired by service, and excited to join a mission-driven team, the Coast Guard Exchange is ready for you. Come be part of something bigger — and help celebrate the heroes who serve us all. *Must be 18 years or older to apply DUTIES: Management a retail activity with annual sales of under $5M. Responsible for the direction and supervision of all store personnel. Assists customers and resolves complaints. Interviews, hires, trains or directs training of assigned personnel. Encourages and develops employees by coaching, providing adequate training, and opportunities for growth. Assists in developing promotional sales in conjunction with the CSC HQ staff. Oversees competitive price checks and submits to HQ buying staff to change pricing. Works with vendors and the HQ buying staff in executing operations of assigned departments or selections. Ensures store recovery. Supervises vending and warehouse operations. Welcome customers, maintain product knowledge and help with the selection of merchandise. React to all concerns of customers quickly with a sense of importance. Key carrier, opening and closing of the store as required, weekends as scheduled. Review monthly P&L’s with goal of comparing actual figures to plan, when plan is not achieved, where possible initiate plan of action to bring in line future months. Will ensure all policies regarding Loss Prevention are adhered to, be alert and proactive regarding shrink and the Alert Line. Will ensure that all associates are in compliance with established safety standards and emergency preparedness requirements. Will ensure all employees receive Coast Guard required training, including but not limited to Civil Rights Awareness and Sexual Harassment Prevention. Will ensure all CG and Federal required posters are prominently displayed in an area visible to all employees. Other duties as assigned. You will be evaluated for this position based on how well you meet the qualifications below. Your resume/application must demonstrate the required experience/education. Please see additional information on how your application is evaluated. QUALIFICATIONS REQUIRED: Minimum: 1. Two years experience as a department manager or assistant manager in a retail environment., 2. Ability to routinely lift 10 pounds and occasionally lift 25 pounds and stand for long periods of time., 3. P&L analysis experience. Preferred (in addition to the minimum): 1. Prior retail merchandising experience., 2. Bachelor’s degree from an accredited university with emphasis in retail or business administration with at least two years of specialized experience. General business experience may be substituted for degree on a year for year basis. And/or 3. Current USCG NAF department manager or assistant manager. Why Work for Us? CGX is not just a retailer—it’s a mission. Profits support Coast Guard morale, welfare, and recreation programs, helping service members and families thrive. You’ll join an organization rooted in integrity, service, and community impact, with opportunities for long-term growth and stability. At the Coast Guard Exchange, we believe in taking care of our team just as much as we take care of our customers. Here’s why you’ll love working with us: • Work-Life Balance: We understand the importance of personal time. Enjoy a healthy balance between work and life with our flexible schedules., • Investing in Your Future: Secure your financial future with our 401k plan and company pension plan, designed to help you save for tomorrow, today., • Company Wellness Initiatives: We support your well-being with wellness programs aimed at keeping you healthy, happy, and at your best., • Flexible Schedules: We know life is unpredictable, so we offer flexible schedules to help you manage your commitments and personal needs., • Professional Growth: Grow your career with us through opportunities for training, development, and career advancement. Join a team that values your well-being and professional growth—apply today! USCG COMMUNITY SERVICES COMMAND COMPREHENSIVE BENEFITS: By choosing to work for the Coast Guard Community Services Command, you will enjoy one of the best benefit packages available anywhere. Benefit offerings are subject to applicable worker categories (Full-time, Part-time, Intermittent), location, position, and length of time in service. • Paid Annual and Sick Leave, • Holiday Pay, • Medical/Dental/Vision Insurance, • Flexible/Dependent Spending Account, • Pension Plan, • 401k Savings Plan, • Life Insurance, • Short Term/Long Term Disability, • Tuition Assistance, • Paid Parental Leave OTHER ESSENTIAL INFORMATION: • Residency Requirements: Non-U.S. nationals, who are authorized to work in the U.S. and applying for any DHS position, must have resided within the United States, or U.S. territories, for at least three of the last five years., • Selectee will be required to participate in Direct Deposit/Electronic Funds Transfer as the Standard method of payment for payroll and travel purposes., • Males born after 12/31/59 and at least 18 years of age must be registered with the Selective Service System, unless covered by an exemption under the Selective Service Law, in accordance with 5 U.S. Code 3378. Selectee will be required to provide a written statement regarding his registration status unless he is exempted by this statute., • Must satisfactorily complete a Federal Background check and all pre-employment requirements, which may include, but are not limited to, background checks, security clearances, drug testing, verification of employment history, and any other requirements applicable to this position. Additionally, you may be required to meet specific job-related qualifications or certifications as a condition of your employment., • Applicants may not be employed in the chain of command of their relatives., • This agency provides reasonable accommodations to applicants with disabilities. If you need a reasonable accommodation for any part of the application and hiring process, please notify the agency. The decision on granting reasonable accommodation will be on a case-by-case basis. HOW TO APPLY Additional Information on how you will be evaluated: Your resume or application must clearly demonstrate the required experience and/or education. Experience includes both paid and unpaid work, such as volunteer service through National Service programs (e.g., professional, philanthropic, religious, community, student, social, committee, sports, or internships). Volunteer work can help develop essential skills, competencies, and leadership experience that may translate directly to paid employment. Your resume is the primary tool used to assess your qualifications. Therefore, we strongly encourage you to provide clear, specific, and detailed descriptions of your experience. You MUST submit a resume or any other written format in English of your choice. It is recommended the resume clearly identifies: (1) The announcement number, title and pay band of the job you are applying for, and, (2) Information such as full name; mailing address; country of citizenship (U.S. Citizenship required OR valid authorization to work in the US); highest Federal grade or NAF pay band held with job series, title, and dates held (if applicable); a statement requiring proof of veterans’ preference by means of DD 214; education; and relevant work experience including start/end dates, supervisor’s name and phone number, salary and title, series and grade if experience was with a non-appropriated fund instrumentality of the Federal government. You should also include a copy of your most recent performance appraisal if you are a current Federal or NAF employee. Applications may not be sent in franked Government envelopes; applications filed in this fashion will not receive consideration. If information is not complete, you may be excluded from consideration. The first application and/or resume submitted for a specific requisition will be considered the only submission. Any duplicate submissions to the same requisition will not be considered. The application date will be used in determining these factors. Outside Candidates: To apply, please visit our website at and click on “Careers” at bottom of the page. Internal Candidates: Sign into ADP Workforce now. Click on Myself/Talent/Career Center. Search by location or Job Title for: Hourly Store Manager I FT- 6693 Houston, TX, US Equal Employment Opportunity: All candidates will be considered without regard to any non-merit factor such as race, color, religion, sexual orientation, national origin, age, disability, or marital status. PRIVACY ACT NOTICE Authority: The U.S. Coast Guard rates applicants under the authority of Title 5 of U.S. Code, Sections 301, 1104, 1302, 2103, 3301, 3304, Executive Order 9397, and Departmental Regulations. Principal Purpose: To collect information needed to determine how well an applicant’s education and work experience qualifies them for the job they are applying for. Routine Use: This information provided will be shared with the hiring manager and interview panel members. It may also be shared in response to a request for discovery or for appearance of a witness, information that is relevant to the subject matter involved in a pending judicial or administrative proceeding. Disclosure: Voluntary, however, failure to disclose the requested information may result in an applicant not receiving consideration for a position in which the information is needed. Paperwork Reduction Act Statement: An agency may not conduct or sponsor an information collection, and a person is not required to respond to this information unless it displays a current valid OMB control number and an expiration date. The control number for this collection is OMB 1625-0120, expiration 01/30/2025. The estimated average time to complete this application is 40 minutes. If you have any comments regarding the burden estimate you can write to U.S. Coast Guard, Community Services Command, 510 Independence Parkway, Suite 500, Chesapeake, VA 23320. #ZR

Job DescriptionPosition: FA Engineer Supervisor: Test & FA Engineering Manager Department: Engineering Location: Houston or relocation required Main functions 1. PROCESS DEVELOPMENT: The FA Engineer will be responsible for developing and improving the testing and failure analysis process of each defective good that needs to have a functional test done in the Service Center (RMA parts from DC and other parts from the internal MRB process). The FA Engineer also advises on requirements to support the Test Engineering team in building testing capability for different parts, modules, and assemblies., 2. EDUCATION: The FA Engineer is responsible for educating system technicians on all related testing and the FA process. Duties and Responsibilities (Including but not Limited to...) 1. NEW PRODUCT INTRODUCTION: During the introduction of new products, the FA Engineer will work together with QA and PE team to identify all parts and modules that need functional test and FA analysis. FA engineer cooperates to set up the test specification a requirements, 2. QUALITY: The FA Engineer will work with the Quality MRB group in order to process all RMA and MRB units according to internal and customer/vendor requirements in terms of quantity, deadline, and value., 3. TEAMWORK: During all of the activities related to the Service Center, the FA Engineer will be required to cooperate with all departments within the Facility and will be required to act a proactive team member, taking a lead role on all testing and failure analysis related issues. Decision-making authority: 2. Communicates with the supervisor as required. Job specification Qualification / Experience • Word, Excel user., • Relevant College or University., • Special PC skills ( eg, CAD )., • Advanced written English., • Advanced spoken English., • 3 years of experience in the relevant field.Primary skills, • Communication skills, • Mathematical, analytical skills, • Visual thinking, • Adaptability skills, • Independent work., • Problem solving, • Logical skills, • High Endurance., • Good verbal skills.Secondary skills and competencies, • Mechanical assembly 5h4gAjR4rR