Failure analysis jobs in San Antonio, TXCreate job alerts

At MPC, we’re committed to being a great place to work – one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. The Modern Management Senior System Architect will own and drive our Mobile Device Management (MDM) strategy. This role is responsible for system architecture, technical design, and governance of endpoint management solutions, ensuring security, scalability, and alignment to business objectives. You will collaborate closely with the End User Computing Product Owner and Product Manager, IT Infrastructure & Cybersecurity teams, technology vendors, managed service partners, and other business units to implement and continuously improve the device management architecture and delivery of the digital end user experience. The ideal candidate combines deep technical expertise in enterprise endpoint management with strategic vision and the ability to interact with and influence stakeholders at all levels. This is a high-impact individual contributor role with emphasis on system architecture, innovation, and broad cross-functional collaboration. • Assists in designing governance and standards activities for technology architecture compliance. Participates in hardware and software technology and product standards selection. Participates and contributes in system architect reviews and ensures architecture adherence., • Collaborates with stakeholders to ensure system architecture alignment with business objectives. Identifies organizational and financial impacts of technology architecture., • Evaluates and selects appropriate technologies, platforms, and frameworks for systems. Assesses technology industry and market trends and their impact on the enterprise. Evaluates technology options and advises on technology investment decisions., • Analyzes and translates business and technical requirements into system designs. Designs and implements end to end system architectures that meet business requirements., • Defines system integration approaches and ensures interoperability of system components. Provides guidance and support to development teams during system implementation. Leads technology change initiatives to deliver business outcomes. May oversee technology implementation and modification activities., • Innovate by continuously assessing emerging technologies and industry best practices in enterprise mobility. Pilot new solutions and drive the evolution of the mobile architecture to enhance user experience, security posture, and operational agility., • Documents and communicates technology architecture design and analysis work. Leads the development of system architecture documentation and diagrams., • Bachelor’s Degree in Information Technology preferred, related field or equivalent experience, • 5+ years of relevant architecture experience required, • Experience with MDM platforms such as Microsoft Intune and JAMF, including initial deployment, policy configuration, ongoing administration, and optimization in complex enterprise environments required., • Experience with endpoint management, across iOS, Android, Windows, and macOS platforms, including device enrollment (Apple Business Manager/DEP, Android Enterprise), application deployment (MAM/app stores), compliance policies, encryption, and mobile security best practices required., • Experience designing scalable, secure, and user-friendly technical solutions by translating business needs into practical architectures that effectively balance usability, security, and operational efficiency required., • Experience with enterprise infrastructure supporting endpoint management, including directory services (Azure AD/AD), certificate management, identity and access management, SSO/conditional access, and security frameworks like Zero Trust preferred. Architecture Frameworks - Proficiency in widely used architecture frameworks like TOGAF (The Open Group Architecture Framework) or Zachman Framework to structure and organize architectural artifacts and processes. Authentic Communicator - Expresses ideas and information, both verbally and in writing, clearly and credibly. Listens to understand and fosters constructive dialogue. Business Acumen - Applies knowledge of MPC’s business, industry and the marketplace to advance the organization’s goals. Makes decisions and recommendations clearly linked to MPC’s strategy. Cloud Computing - Knowing how to manage cloud services, develop cloud applications and use cloud architecture to meet customer needs. Continuous Improvement Mindset - Identifies and leads opportunities for continuous improvement and value creation, both incremental and large-scale. Functional Expertise - A strong understanding of various technologies, platforms, and systems relevant to the organization's architecture, such as networking, databases, cloud computing, and security. Internet of Things (IoT) - Familiarity with IoT concepts and protocols, as well as experience designing architectures that incorporate IoT devices and enable seamless connectivity and data exchange. Performance Monitoring - The process of measuring the performance of a system in real time in order to determine problems and identify other factors that may cause problems in the future. Strategic Outlook - Examines issues, generates ideas, creates future scenarios and develops plans with a long-term perspective. Ensures short-term goals support long-term strategy and that organizational/functional strategy aligns with and supports MPC’s overall business strategy. System Reliability - Reliability refers to the ability of a system or component to consistently perform its intended function without failure, errors, or breakdowns. High availability, on the other hand, denotes the design and implementation of systems to ensure continuous operation and accessibility, minimizing downtime and ensuring users can access services whenever needed. Systems Design - The process of designing technical solutions and systems to meet specified business and user requirements that are compatible with established system architectures, as well as organizational and performance standards. #TACorporate As an energy industry leader, our career opportunities fuel personal and professional growth. Location: San Antonio, Texas Additional locations: Findlay, Ohio Job Requisition ID: 00017876 Location Address: 19100 Ridgewood Pkwy Education: Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, ___. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ___. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at ___.The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

PURPOSE AND SCOPE: Supports FMCNA’s mission, vision, core values and customer service philosophy. Adheres to the FMCNA Compliance Program, including following all regulatory and FMS policy requirements. Ensure provision of quality patient care while maintaining cost-effective clinical operations in accordance with all legal, compliance, and regulatory requirements and programs. Adheres to all requirements of the FMCNA Compliance Program, and FMS patient care and administrative policies as the clinical leader, has the authority to make daily decisions to ensure continuity of care and patient and staff safety PRINCIPAL DUTIES AND RESPONSIBILITIES: * Manages the tactical execution of short- and long-term objectives through the coordination of activities with a direct responsibility for results, including costs, methods, and staffing. * Provides leadership, coaching and development plans for all direct reports to maintain an engaged and productive workforce; partnering with Human Resources on employee matters. * Technically proficient in the specific department and knowledge of industry practice and business principles. Works on issues of diverse scope where analysis of situation or data requires evaluation of a variety of factors, including an understanding of current business trends. Has a larger range within the department. * Responsible for supporting and driving FMS quality standards through meeting all ESRD regulatory requirements and the practice of Quality Assessment and Improvement (QAI), including use of FMS QAI tools. * Responsible for addressing and acting on adverse events and action thresholds. * Oversees facility’s Home Therapies Program if applicable. * Accountable for compliance with all applicable federal, state and local laws and regulations. * Ensures all FMS Clinical Quality policies and procedures are communicated to and implemented by the facility staff. * Maintains integrity of medical records and other FMS administrative and operational records. * Complies with all data collections and auditing activities. * Maintains facility environmental integrity, including safety. * Experienced leadership required for multi-faceted environment; role primarily focuses on tactical execution. Receives assignments in the form of objectives and determines how to use resources to meet schedules and goals. * An individual contributor will have significant project/process responsibilities. Program or project responsibility generally within the function. * Follows processes and operational policies in selecting methods and techniques for obtaining solutions. Interprets and recommends change to policies and establishes procedures that effect immediate organization(s). * Decisions have an impact on work processes and outcomes. Erroneous decisions or failure to achieve results will add costs and may impact the short-term goals of the organization. * Frequently interacts with subordinate supervisors, customers, and/or functional peer group managers, normally involving matters between functional areas, other company divisions or units, or customers. * Participates and presents at meetings with internal and external representatives. Often leading a cooperative effort among members of a project team. * Interacts with internal departments and external customers; particularly in problem resolution. Acts as an advisor to subordinate(s) to meet schedules and/or resolve technical problems. * Responsible for hiring, coaching and counseling employees, including performance reviews, disciplinary action and terminations. * Provides technical guidance. * Performs other related duties as assigned. PATIENT CARE: * Coordinates all aspects of patient care with the appropriate staff members, from admission through discharge of the patient. * Ensure education of the patient regarding quality measures, transplant options, modality awareness, and access care, including catheter reduction and adherence to treatment regime. * Acts as a resource for the patient to address patient concerns and questions. * Accountable for timely completion of patient care assessments and care plans by organizing meetings of the facility’s Interdisciplinary Team to discuss patient care plans and to resolve patient problems. * Directs initiation, maintenance and communication of efficient and timely patient schedules to ensure maximization of the facility station efficiency. * Is aware of and develops a mechanism or process for knowing the specific situation of each patient, including hospitalizations, no- shows, catheter use, and any significant change in patient care status. * Develops action plans for unexcused and missed treatments in collaboration with the Director. * Plans, coordinates and acts as the liaison for patient care as per the disease management agreement, including initial and ongoing validation of member eligibility. Facilitate timely workup of patients for access management, dialysis services, patient education, hospitalizations, and kidney transplantation as appropriate, and ensures coordination of care with the multidisciplinary renal team. Communicates changes in patient status regarding clinical, insurance, travel and transportation issues to the disease management company. Maintains current knowledge of disease management software and systems as pertinent. STAFF: * Responsible for implementation of FMS staffing, and medical supply models, to provide quality patient care, and makes recommendations. * Participates in the recruitment and interview process, and decision to hire new personnel. * Ensures completion of new hiring orientation and training including mandatory in-services and ICD code training when applicable. Ensures documentation completed for annual in service training, and policy and procedure in service updates. * Responsible for all patient care employees receiving appropriate training according to FMS policy, including training to ensure ongoing compliance with all FMS risk management initiatives. * Provides opportunities for professional growth, and training to ensure clinical competence and the ability for licensed staff to assume Team Leader responsibilities * Responsible for overseeing performance of all licensed personnel, direct patient care staff, reporting indirect patient care personnel as assigned, and when necessary, technical staff. Provides employee education and guidance, and feedback related to performance. * Maintains current knowledge regarding FMCNA benefits, Human Resources policies, procedures, and processes, and acts as a resource to facility staff. * Provides counseling for all clinical staff members at regular intervals offering support and encouraging professional growth. * Completes timely employee evaluations and establishes annual goals for staff. * Provides written documentation of all disciplinary conferences in accordance with the established personnel policies, and confers with the Director and Human Resources regarding the nature of the disciplinary decisions. * Participates in Corporate and Business Unit specific employee recognition and satisfaction programs. * Creates, maintains, and communicates efficient and timely employee schedules according to the needs of the facility. * Creates and implements a Continuous Quality Improvement (CQI) Process Improvement Team that involves staff in problem solving. PHYSICIANS: * Facilitates the application process for physician privileges and compliance with FMS Medical Staff By-Laws. * Responsible for strong Director and physician relationships and facilitating staff relationships with physicians. * Ensures regular and effective communication with all physicians, through regular meetings with Directors. * Participates in Governing Body. * Schedules and coordinates CQI meetings with physicians. MAINTENANCE/TECHNICAL: * Responsible for the integrity and safety of the facility water system. * Must be knowledgeable in the operation of all facility equipment and technology. ADMINISTRATIVE: * Responsible for maintaining and updating all FMS manuals. * Accountable for completion of the Annual Standing Order Review and ICD coding. * Checks correspondence whether electronic, paper or voice mail, and responds as appropriate. * Directs information gathering as required supporting billing and collection activities. * Responsible for efficient utilization of medication, laboratory, inventory, supplies and equipment to achieve supply cost goals following all guidelines established in FMS formularies * Participates in the completion and interpretation of the Pl-17 inventory supply use analysis. * Reviews and approves facility payroll. * Reviews profit and loss statements with Director * Responsible for participating in all required Network reporting and on-site state or federal surveys. * Participates in the completion of the FMS Administrative Clinical Review. PHYSICAL DEMANDS AND WORKING CONDITIONS: • The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Employees are required to take the Ishihara's Color Blindness test as a condition of employment. Note that: Failing the Ishihara Test for Color Blindness does not preclude employment. The Company will consider whether reasonable accommodations can be made., • Day to day work includes desk and personal computer work and interaction with patients, facility staff and physicians, • Position may require travel between assigned facilities and various locations within the community. Travel to regional, Business Unit and Corporate meetings may be required., • The work environment is characteristic of a health care facility with air temperature control and moderate noise levels. May be exposed to infectious and contagious diseases/materials. SUPERVISION: • Responsible for the direct supervision of various levels of staff as designated by region. EDUCATION AND REQUIRED CREDENTIALS: • Bachelor’s Degree; Advanced Degree desirable or an equivalent combination of education and experience, • Graduate of an accredited School of Nursing (RN)., • Current appropriate state licensure. EXPERIENCE AND SKILLS: • 6 – 8 years’ related experience or an equivalent combination of education and experience., • 3+ years’ supervisory or project/program management experience preferred., • Minimum of 12 months experience in clinical nursing is required. Experience in med/surg or ICU/CCU is preferred., • Minimum of 6 months chronic or acute dialysis nursing experience is required., • Must be available as a full-time employee and provide on-call coverage when necessary., • Demonstrated leadership competencies and skills for the position, including excellent communication, customer service, continuous quality improvement, relationship development, results orientation, team building, motivating employees, performance management, and decision making., • Demonstrated management skills necessary to provide leadership in the supervision of dialysis personnel and to ensure the delivery of maximum quality care to all patients., • Must complete Clinical Manager training modules and ongoing developmental programs within the specified time line. EO/AA Employer: Minorities/Females/Veterans/Disability/Sexual Orientation/Gender Identity Fresenius Medical Care North America maintains a drug-free workplace in accordance with applicable federal and state laws. EOE, disability/veterans

Job DescriptionDescription: JOB SUMMARY The Mechanic Lead performs maintenance on all company assets, overhauls minor components and replacements and assists all mechanics, mechanic helpers and technicians with electrical, hydraulic, computer diagnostics. This position also assists technicians with major overhauls on major components, performs scheduled and unscheduled preventative maintenance and responds to service and road calls. DUTIES & ESSENTIAL JOB FUNCTIONS AND RESPONSIBILITIES • Wear appropriate personal protective equipment (PPE) when and where required., • Perform preventive maintenance or repairs on company assets according to work pending reports, VCR reports, PM schedules, and the direction of the Maintenance Team., • Document repair operations and time-tracking in accordance with company procedures., • Requisition parts as necessary., • Perform failure analysis and reporting findings to maintenance management., • Ensure work area is clean and neat., • Maintain service truck readiness including safety equipment, tools, equipment, and cleanliness., • Assist co - workers with diagnostics and repairs., • Comply with company safety policies and with applicable state and federal regulations., • Report immediately any safety violations and correct unsafe acts or conditions., • Conduct technical inspections and document findings., • Maintain repair order documentation to include repair description, parts used, and repair times., • Perform monthly inventories as required., • Must possess own tools., • Other duties as assigned. • 5 or more years of experience required, • Supervisory experience preferredRequirements:

Job DescriptionJOB SUMMARY The Service Manager is responsible for providing leadership, generating sales, and prioritizing and directing activities within the service department. The Service Manager leads service crews to maintain company expectations regarding safety and quality workmanship as well as oversees all aspects of service work including installation and repair to billing. JOB DUTIES AND RESPONSIBILITIES Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. • Other duties as assigned. KNOWLEDGE, SKILLS, AND ABILITIES • Roof system knowledge – Knowledge of various roof systems and materials and methods of repair and maintenance and the ability to teach others, • Project management – Coordinate projects, communicate changes and monitor progress, • Problem-solving – Develop alternative solutions; use reason even when dealing with emotional topics, • Planning/organizing – Prioritize and plan work activities; organize or schedule service department employees and their tasks, • Effective communication – Ability to convey information, concepts and concerns to people with differing communication styles, • Oral Communication – Speak in a clear and professional manner, • Written Communication – Able to read and interpret written information; write legibly and informatively in a professional manner, • Language skills – Ability to read, analyze and interpret, • Technology – Ability to use phones, tablets and other technology tool, • Math – Ability to perform math calculations relevant to roofing work, • Safety and security – Ability to identify, correct and report unsafe conditions according to company and OSHA standards; use equipment and materials properly and effectively, • Budgeting – Ability to understand implications of change orders and lost production on job budgets, • Cost consciousness – Understand budgeting and implications to jobsMINIMUM QUALIFICATIONS, • High School diploma or equivalent., • 3 to 5 years of experience in the roofing industry., • Valid Driver’s License., • Supervisory experience preferred.SPECIAL QUALIFICATIONS, • Must pass a criminal background check and drug screening., • Must be a high-performing, innovative, values-driven, informed, and passionate individual.WORK CONDITIONS, • Individual works in a heated and cooled typical office environment., • May be required to visit work sites – exposure to outdoor elements and conditions., • The above describes the general content and requirements for this position. It is not intended

Job DescriptionEControls is a global provider of innovative, state-of-the-art integrated controls solutions for internal combustion engines and electric drive systems in the off-highway, on-highway, and stationary equipment markets. EControls designs world-class, full-authority engine management systems for major OEMs around the world. Our global engine development labs and engineering staff offer full-range support, from design guidance for base engine conversion to hardware, software, and engine calibration to meet each application's specific requirements. We are passionate about customer satisfaction and service. We fearlessly engage in any effort that will eliminate our customers’ risk and clear a path to their success. We immerse ourselves in our customers’ world, reveal unknowns and deliver integrated solutions. Key Job Elements • Lead warranty returns administration and conduct failure analysis by investigating methods and procedures for analysis of warranty parts returned., • Update and process customer warranties with the highest level of customer service and satisfaction., • Assist internal Quality and Engineering in providing customer support and education, working with users to identify needs, determine sources of problems, or to provide information on product use as necessary., • Work with accounting to ensure credits are applied to proper accounts., • Contact Program Manager to clarify issues and report back on corrective actions., • Track customer complaints and lead/drive corrective actions by influencing those accountable (Supplier, Design, Manufacturing) utilizing the Global 8D methodology., • Process ECO, DCN’s and deviations., • Provide technical assistance and guidance to team members on problems solving techniques on the Warranty Lab., • Monitor Customer websites to monitor warranty metrics., • Ensure lessons learned from warranty analysis are communicated across all product/customer platforms ad captured on new projects within DFMEA (Design Failure Mode and Effect Analysis) /PFMEA (Process Failure Mode and Effect Analysis) ., • 3-5 years related to support of Quality / reliability systems within an OEM or Components Engineering design group or Technical Service and Warranty returns group.Knowledge, skills and abilities., • Ability to work on multiple fronts each day., • Excellent communication skills., • Experience supporting ISO, TS, CSA and /or UL certifications., • Knowledge of FMEA, Fault Tree Analysis, Product Return Rate Analysis and Root cause failure analysis., • Ability to effectively manage customer relationships.Key performance characteristics, • Leadership, • Self-starter / Self-motivator, • Power of analysis, • Strong work ethic, • Innovative outlook, • Customer-focused attitude, • Adaptability, • Sense of urgency, • Positive attitude qfK5qE7uo6

Job DescriptionEControls is a global provider of innovative, state-of-the-art integrated controls solutions for internal combustion engines and electric drive systems in the off-highway, on-highway, and stationary equipment markets. EControls designs world-class, full-authority engine management systems for major OEMs around the world. Our global engine development labs and engineering staff offer full-range support, from design guidance for base engine conversion to hardware, software, and engine calibration to meet each application's specific requirements. We are passionate about customer satisfaction and service. We fearlessly engage in any effort that will eliminate our customers’ risk and clear a path to their success. We immerse ourselves in our customers’ world, reveal unknowns and deliver integrated solutions. We are seeking a Process Quality Engineer to work at our AWS location in San Antonio, Texas. Candidate must be a self-starter, hands-on individual with 5+ years of automotive industry experience. Experience with Wire Harness manufacturing is a preferred. Key Job Elements Fulfill the role of Quality Engineer in: * • Process Quality, • RTF Metric reporting and problem solving., • Support and instruct Quality Inspectors., • Identify root cause and respond with corrective action., • Develop and execute plans for quality control to ensure constant manufacturing continuity and product conformance., • Review, supervise and review quality control plans., • Participate as Material Review Board member to review Non-Conforming Material as suitable., • Initiate purge and sort activities along with supervise quality documents., • Develop and execute statistical process controls utilizing appropriate quality tools plus statistical techniques., • DMAIC: Define, measure, analyze, improve and control, • PDCA: Plan, do, check, act, • Problem solving (product/process), • APQP: Advanced Product Quality Planning, • Review drawings, routings, work orders, work instructions and various related production and development plans for quality requirements., • Process flow diagrams, Work instructions, control plans and PFMEA, • PPAP: Production Part Approval Process: Assist qualification of new manufactured quality products., • Customer Quality: Apply 8D Methodology to investigate all Customer complaints and issues., • Fulfill the role of Manufacturing engineer in:, • Change management: Drive execution of SBR, ECR/ECO, DCO, DEV, 8D, NCR and Inspections., • Continuous Improvement: Optimizer Value streams for operational excellence and lean manufacturing:, • Poka Yoke / Mistake proofing, • Capacity (current/forecast), • Standard work / Line balance, • Kaizen (mini/major events), • 5S and Visual Standards, • SMED: Single Minute Exchange of Dies, • Support Manufacturing Operations, • Design experiments to develop optimum production processes - manual assembly, automated assembly, press operations, automated inspection, testing, etc., • Supervise ME Technicians to identify and solve production/quality issues, • Plan and develop processes and capacity utilization strategy for assembly operation of electrical components., • Ensure production readiness of key processes., • Troubleshoot root cause for equipment and process related problems., • Develop appropriate secondary manufacturing processes., • Create work instructions & procedures and update existing., • Conduct time studies, modify BOMs and routings., • Work with suppliers on component issues., • Workplace design (Tools / Fixtures / Cells) and Plant layout., • Material presentation and packaging., • Support New Product Development and Continuous Improvement Efforts, • Class 2 project ownership for Operations., • Class 1 support Advanced Manufacturing Engineering and Manufacturing Test Engineering., • Support Safety and Training, • Establish solutions to safety near misses, Path cards (Ergonomics)., • Lead and participate in OSHA teams., • Train the trainers and train operators as required., • Personal Development, • B.S. in Electrical or Mechanical Engineering or B.S.E.T. Electrical or Mechanical EngineeringExperience, • A minimum of 5 years of high volume Electronic Manufacturing, preferably for automotive applications, • Knowledge of FMEA, PPAP, MSA, Fault Tree Analysis, DVT (Design Verification Testing), Product Return Rate Analysis, FRACAS and Root Cause Failure Analysis is required., • Ability to communicate effectively with global customers, design/production engineering, and manufacturing., • Experience with lean manufacturing and Six Sigma methodologies., • Experience with Mini-Tab preferred., • Innovative Outlook, • Power of Analysis, • Effective Communication Skills, • Adaptability, Strong Work Ethic, • Passion for the Job and Sense of Urgency, • Positive Attitude, Honesty/Integrity, • Provide Quality leadership for root cause analysis and corrective action teams related to product non-conformances reported by customers and/or are supplier related in an effort support corporate quality performance goals, • Continually seeks to accomplish the mission and improve the organization by Displaying a no-excuse can-do attitude, • Providing a superior level of customer service by exceeding internal and external customer expectations, • Staying aware of developments in quality knowledge and tools in the quality industry eKswTjX749

Job Description Job Summary The SSHO/QCM position is responsible for the coordination and implementation of corporate health and safety programs and policies to assure compliance with government contract specifications and regulatory requirements. This position provides technical support for military construction sites and complex projects at multiple locations across the USA. Position requires being able to ensure all materials and workmanship meet the requirements of the contract. Must be able to meet the five year minimum of Quality Control Management as laid out in the specifications. Bristol Alliance of Companies (Bristol) is committed to building lasting relationships that reflect our hard work, ingenuity, and dedication to safety. Every employee has an impact on our success, which benefits the Native Culture, land, and people of the Bristol Bay region. Our values: People, Communities, Reputation, Teamwork, Trust, and Truth. Essential Functions • Coordinate, administer, and maintain program documentation in accordance with OSHA and EM385 (e.g., USACE and NAVFAC) requirements., • Provide technical health and safety guidance related to construction, restoration renovation, and remediation projects., • Ability to be approved by our government clientele and serve as an EM385 (2024) Alternate Level 1 Site Safety and Health Officer (SSHO)., • Write Accident Prevention Plans (APPs), review Activity Hazard Analyses (AHAs), and support subcontractors with producing client-approved project-specific plans, such as Fall Protection and Prevent Plans, Excavation and Trenching Plans, Steel Erection Plans, and others as needed., • Support the Bristol Health and Safety Training Manager in achieving corporate objectives by training employees and subcontractor Competent Persons for high-risk work activities, such as work at height (i.e., Fall Protection), Excavation and Trenching, and Confined Space Entry., • Work with Project Managers and site personnel to ensure compliance with company programs, government regulations and other guidelines., • Administer the Motor Vehicle Safety Program, including new hire motor vehicle record screening, computer-based-training (CBT) for Authorized Drivers, Monitor DOT compliance (as necessary) and review In-Vehicle Monitoring System (IVMS) data., • Update existing CBTs and develop new CBTs for Bristol health and safety programs for all levels of employees, managers, and supervisors., • Assist with incident and near miss investigations, root cause analysis and development of corrective actions and lessons learned., • Conduct periodic inspections and audits of operations and construction projects., • Possess a high level of integrity and always maintain confidentiality., • Other duties as assigned., • AS QCM you must be able to lead and take notes for all meetings with the Government and End-user., • Be able to learn and grasp the computer program Procore for construction., • Must be able to review submittals provided by the subcontractor to ensure they meet the requirements of the contract., • Review and enter daily reports in Procore, Bristol’s Intranet Server, as well as enter reports into RMS or ECMS., • Conduct and facilitate the three phases of construction. (Preparatories, Initials and Follow-up Meetings., • Ability to work with MS Office software applications., • Ability to gather and analyze data, reason logically and creatively, draw conclusions and make appropriate recommendations., • Skilled in written and verbal communication., • Ability to be flexible and adapt to constant change., • Skilled in interpersonal communication to assist staff and clients., • Ability to anticipate trends and risks., • Meet the minimum requirements for USACE EM385 (2024) Level 1 SSHO –, • High school diploma or GED and at least five years of cumulative health and safety construction experience within the last ten years. In addition, must have maintained competency by taking 24 hours of documented formal classroom training within the past five years. OR, • A health and safety, science, or engineering associate’s degree. AND, • Board of Certified Safety Professionals (BCSP) certification:, • Construction Health and Safety Technician (CHST) AND, • Three years of construction health and safety experience., • Valid driver’s license with fewer than 3 minor moving violations (e.g., speeding < 15 mph over the limit) in the past 3 years and no serious violations (e.g., DUI, leaving the scene or failure to report an accident) in the past 5 years., • A health and safety, science, or engineering BA, BS, MA, or MS degree., • Minimum of 5 years of construction QCM experience construction projects like applicable contract as well as having completed the Army Corp. of Engineers Quality Control Management., • BCSP Associate Safety Professional (ASP) certification, AND/OR, • BCSP Graduate Safety Professional (GSP) certification, AND/OR, • BCSP Certified Safety Professional (CSP) certification, AND/OR, • BCSP Certified Instructional Trainer (CIT), AND The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Position may be subject to both inside and outside environmental conditions, noise sufficient to cause the worker to shout., • Position may be subject to a variety of physical conditions – proximity to moving mechanical parts, moving vehicles, electric current, working on scaffolding and high places, exposure to high heat or exposure to chemicals., • Position may be subject to atmospheric conditions – fumes, odors, dusts, mist, gases, or poor ventilation. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Mobility: must be able to stoop, kneel, reach, walk, lift, grasp, feel, talk, hear, and perform repetitive motions., • Hearing: must be able to hear audible safety alarms., • Visual Acuity: must be adequate to perform the above listed tasks in a safe manner and perform activities such as viewing a computer terminal and extensive reading. Excellent salary and benefits package to include paid time off, paid holidays, comprehensive health plan including medical, dental, vision, life, short-term disability insurance, and 401(k) plan with employer match. Equal Opportunity Employer Statement Bristol companies are equal opportunity employers and offer any available positions to all, without regard to race, color, religion, sex, national origin, age, disability, veteran status, parenthood, pregnancy, marital status, or changes in marital status, in accordance with applicable state and federal laws. This applies to recruitment, placement, pay, benefits, training, employment status changes, social and recreational programs, and other conditions and benefits of employment. Bristol grants employment preference first to BBNC and Choggiung shareholders, their spouses, or descendants, and second to Alaska Native Corporation shareholders in accordance with P.L. 93-638. Disclaimer This job description is not intended to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice. This job description is not a contract or employment. It does not promise or guarantee any particular benefit or specific action. All employment with Bristol is “at-will” which means that Bristol or employee can terminate the employment relationship at any time with or without cause.

Job Description Job Summary: This position is responsible for the evaluation and interpretation of and communication to customers of analytical and physical test results in support of the Schedule Oil Sampling (SOS). Program. Performing testing of fluid samples in a lab environment. The SOS Interpreter is responsible for (but not limited to) used oil sample test data evaluation, trend analysis, and communication of maintenance and/or repair recommendations to customers resulting from data interpretation. In addition, the interpreter must maintain customer information and report files, as well as, keep an up-to-date library of interpretative information including (but not limited to) S.O.S. Newsletters, Machine Profiles, Wear Tables, and other CAT publications. Essential Functions: • Analyzes and correlates test results with the component’s metallurgical, operational, lubrication, and maintenance information in order to assess equipment condition., • Interprets results, reports, and recommends to customers as to the nature of the pending failure and the proper course of prevention or corrective action., • Analyze equipment trends in general and develop “norms” which reflect local geographic, operating, and maintenance conditions., • Monitors customer information, report files, and an up-to-date library of interpretative information to increase efficiency., • Perform physical testing and analysis of daily fluid samples utilizing laboratory equipment such as Atomic Absorption Spectrophotometers, GC, FTIR, particle counter, viscometers etc., • Demonstrate and perform QC checks and preventive maintenance procedures as well as troubleshoot lab instruments when needed., • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission., • Works safely always and adheres to all applicable safety policies; complies with all company policies, procedures, and standards., • General knowledge of construction equipment and work tools, including design, operation, and use., • Knowledge of lab practices, procedures, equipment, and clerical techniques., • Knowledge of techniques and methods of research and data collection., • Knowledge of record-keeping procedures and practices., • Computer proficiency and technical aptitude to utilize various MS Office products, DBS, Intranet, and other job-related software., • Excellent verbal, written, and communication skills., • Ability to work on multiple projects and deal effectively with customers, employees, team members, and management., • Highly organized, detail-oriented, and professional., • Ability to operate office machines and computers., • Ability to read, analyze, create, and interpret common business information, reports, and documents., • Ability to listen to and understand information and ideas presented through spoken words and sentences., • At minimum, three years of laboratory technician experience is required., • Data interpretation experience., • High school diploma or equivalent with additional specialized/technical training or some college courses required., • Travel up to 10% may be expected.

Job DescriptionSalary: Purpose: The Engineering manager will lead a Product Development team comprising of project engineers and product managers. The Engineering Manager will be responsible for the planning, managing, and supporting all product development projects within their team. This encompasses both sustaining and new product development initiatives. Duties & Responsibilities: • Develop and execute product development and product management strategies in alignment with business objectives., • Oversee product development projects for compliance with quality and regulatory requirements., • Communicate product strategies, updates, and performance metrics to leadership., • Develop and manage budgets for product development., • Conduct market research to identify product opportunities and market trends., • Identify and mitigate potential risks associated with product development., • Author, review, and approve product development and product management documents (procedures, validations, marketing materials, etc.)., • Support the development of validation, verification, and qualification protocols for compliance with regulatory requirements and project objectives., • Review and approve validation, verification, and qualification plans, protocols, execution data, and summary assessments for completeness and compliance with regulatory requirements., • Review and approve project plans to ensure alignment with the business, marketing, sales, and user needs., • Provide oversight, support, and approval of project timelines for accuracy and accountability., • Oversee product design development for effective solutions and scalable manufacturing processes., • Oversee and support technology transfer of new and licensed technologies., • Oversee and support the development of new product financials (COGS, Gross Margin, etc.)., • Conduct group trainings for direct reports to provide education on regulatory requirements, design controls, validations, product development, project management, and quality practices/processes., • Provide technical expertise and guidance to the Product Development team on varied product development aspects including product design, project management, manufacturing, and marketing., • Participate in the development and review of risk management documents such as failure modes and effects analysis (FMEA)., • Collaborate with the Research Department to ensure product development objectives are met., • Collaborate with the QA & RA Departments to develop quality supplier agreements, labeling, product claims, 510k submissions, regulatory strategies, and sales & marketing materials., • Assist with investigation of product quality events and corrective and preventive (CAPA), • Support regulatory and reimbursement submissions for, • Patent new technologies and processes., • Conduct interviews, performance reviews, monitor annuals goals and establish performance improvement plans as needed., • Manage direct reports, work schedules, and timesheets., • Maintain a working knowledge of ASTM, AAMI, ISO, and other necessary validations or testing guidances required for product development projects., • Maintain a working knowledge of FDA 21 CFR 1271, FDA 21 CFR 820, AATB, and other regulatory requirements, if applicable., • Report to work in-person and start job duties on time for established shift., • Complete required hours on assigned works shift to complete assigned responsibilities and duties. Skills & Abilities: • Strong verbal and written communication skills, including presentation skills., • Strong technical writing ability., • Ability to manage a cross functional team., • Knowledge of cleanroom manufacturing environments and validation procedures., • Strong analytical and creative thinking skills., • Ability to work in a fast-paced environment., • Ability to secure and maintain a favorable background investigation and clearance. Education & Experience: • Bachelors or masters degree in biomedical engineering, tissue engineering, mechanical engineering, or related field required., • 8 - 10+ years of product development experience required., • 3+ years of leadership and management experience preferred., • Experience in mechanical design and 3D modeling required., • Experience in manufacturing process design required., • Experience with 21 CFR 820.30 Design Controls required., • Proficiency in project management required., • Experience with allografts and/or medical devices required., • Experience in conducting/overseeing process validations, sterilization validations and/or equipment validations.

Job DescriptionSalary: Purpose The Engineering manager will lead a Product Development team comprising of project engineers and product managers. The Engineering Manager will be responsible for the planning, managing, and supporting all product development projects within their team. This encompasses both sustaining and new product development initiatives. Duties & Responsibilities • Develop and execute product development and product management strategies in alignment with business objectives, • Oversee product development projects for compliance with quality and regulatory requirements, • Communicate product strategies, updates, and performance metrics to leadership, • Develop and manage budgets for product development, • Conduct market research to identify product opportunities and market trends, • Identify and mitigate potential risks associated with product development, • Author, review, and approve product development and product management documents (procedures, validations, marketing materials, etc.), • Lead and develop new engineering and product development procedures or forms to improve department efficiency, • Support the development of validation, verification, and qualification protocols for compliance with regulatory requirements and project objectives, • Review and approve validation, verification, and qualification plans, protocols, execution data, and summary assessments for completeness and compliance with regulatory requirements, • Review and approve project plans to ensure alignment with the business, marketing, sales, and user needs, • Provide oversight, support, and approval of project timelines for accuracy and accountability, • Oversee product design development for effective solutions and scalable manufacturing processes, • Oversee and support technology transfer of new and licensed technologies, • Oversee and support the development of new product financials (COGS, Gross Margin, etc.), • Oversee Product Development workshop, maintenance, and equipment, • Conduct group trainings for direct reports to provide education on regulatory requirements, design controls, validations, product development, project management, and quality practices/processes, • Provide technical expertise and guidance to the Product Development team on varied product development aspects including product design, project management, manufacturing, and marketing, • Participate in the development and review of risk management documents such as failure modes and effects analysis (FMEA), • Collaborate with the Research Department to ensure product development objectives are met, • Collaborate with the QA & RA Departments to develop quality supplier agreements, labeling, product claims, 510k submissions, regulatory strategies, and sales & marketing materials, • Assist with investigation of product quality events and corrective and preventive (CAPA), • Support regulatory and reimbursement submissions for new products, • Patent new technologies and processes, • Conduct interviews, performance reviews, monitor annuals goals and establish performance improvement plans as needed, • Manage direct reports, work schedules, and timesheets, • Maintain a working knowledge of ASTM, AAMI, ISO, and other necessary validations or testing guidances required for product development projects, • Maintain a working knowledge of FDA 21 CFR 1271, FDA 21 CFR 820, AATB, and other regulatory requirements, if applicable, • Report to work in-person and start job duties on time for established shift, • Complete required hours on assigned works shift to complete assigned responsibilities and duties, • Strong verbal and written communication skills, including presentation skills, • Strong technical writing ability, • Ability to manage a cross functional team, • Knowledge of cleanroom manufacturing environments and validation procedures, • Strong analytical and creative thinking skills, • Ability to work in a fast-paced environment, • Bachelors or masters degree in biomedical engineering, tissue engineering, mechanical engineering, or related field required, • 10+ years of product development experience required, • 2+ years of experience managing engineering or product development teamsrequired, • Experience in mechanical design and 3D modeling required, • Experience in manufacturing process design required, • Experience with 21 CFR 820.30 Design Controls required, • Proficiency in project management required, • Experience with allografts and/or medical devices required, • Experience in conducting/overseeing process validations, sterilization validations and/or equipment validations

Job DescriptionSalary: Purpose The Senior Project Engineer for the Medical Devices Team will be responsible for supporting existing products and the development of new products. This will include leading project management, product development, and verification & validation activities. Responsibilities • Manage and execute product development projects from ideation to market launch and sustaining, • Identify and develop project deliverables required for the launch of new products in collaboration with the Quality Assurance and Operations departments, • Lead project management activities on assigned projects including the project schedule, budget, work products and deliverables, • Execute projects following design control practices and develop necessary project inputs and outputs required for each development phase. This includes collecting customer and market feedback to identify critical product characteristics, • Design new products and accessories using CAD software and analyze with FEA or experimental analysis where needed, • Develop and execute validation protocols in accordance with regulatory requirements. Review validation data and draft validation reports, • Manage and mentor Project Engineers specific to the scope of a designated project, • Develop and review risk management documents such as failure modes and effects analysis (FEMA), • Collaborate with the QA/RQ departments to develop quality supplier agreements, labeling, product claims, 510K submissions, regulatory strategies, and sales & marketing materials, • Provide technical expertise in varied product development projects to include providing guidance to engineers in the development of product designs, manufacturing processes, troubleshooting, and design controls, • Organize effective methods of communication between project stakeholders, • Develop scalable and repeatable manufacturing processes for new products in collaboration with the Quality Assurance (QA) and Operations departments, • Author and revise standard operating procedures (SOP) according to FDA, AATB, and other regulations if applicable, • Review, analyze, and characterize critical financial characteristics of products including COGS, • Conduct group training for new processes and complete technology transfer of new products, • Perform processing of human tissue as part of the development of new processes, • Design and execute scientific experiments for product development projects. Complete data collection and data analysis to support project deliverables. Experimentation may extend to in-vitro or in-vivo assays, • Execute and plan new company initiatives including equipment onboarding, supply chain management, distribution capability, and product support, • Design and develop proprietary manufacturing fixtures and equipment. Order and evaluate commercial equipment to support new or existing manufacturing processes, • Assist with investigation of product quality events and corrective and preventative (CAPA) actions, • Support regulatory and reimbursement submissions for products, • Identify and develop a working knowledge of ASTM, AAMI, ISO, and other necessary validation or testing guidance required for assigned product development projects, • Maintain a working knowledge of FDA 21 CFR 1271, FDA 21 CFR 820, AATB standards, ISO Standards, cGMP/CGTP, other relevant regulations/standards, and internal organizational policies and standard operating procedures, • Maintain acceptable attendance and punctuality for scheduled work hours and meetings. Ensure completion of assigned tasks and responsibilities within defined timeframes, • Flexibility to work outside of normal business hours during weekdays or weekends with reasonable advance notice to support business/operational needs when necessary, • Perform other duties as assigned Skills • Ability to work independently and in a team environment, • Project management experience, • Ability to present complex ideas, • Knowledge of manufacturing environment and validation procedures, • Strong design skills and experience using CAD, • Knowledge and experience with effective DFM reviews, • Strong analytical and creative thinking skills, • Experience working with vendors and suppliers, • Excellent attention to detail and organization, • Excellent written and verbal communication, • Highest level of ethics and integrity, • Ability to lead and motivate right behaviors, • Ability to multi-task and work in a fast-paced environment, • Strong technical writing, • Effective project management, • Proficiency in Microsoft Office Qualifications/Requirements • Bachelors degree in biomedical engineering, tissue engineering, mechanical engineering, or related field, from an accredited college or university required., • 5-6 years of experience in product development required, • 4 years of experience in project management required, • Experience in mechanical design and 3D modeling CAD software required, • Experience in manufacturing process design, • Working knowledge of design control processes, • Experience with allografts and/or medical devices preferred., • Clearance of favorable background investigation required.

Job Description The Machine Inventory Product Specialist is responsible for managing a category of machine inventory. This individual is a product expert in their category, staying current with product features and benefits, configurations, and sourcing options. The ideal candidate will possess a deep understanding of Caterpillar machinery, product offerings, and sourcing methods, and will proactively use this knowledge in a collaborative manner to optimize inventory management, setting machine configurations, stocking levels, and providing sourcing solutions that balance the needs of inventory turns, market share, cost, customer benefit, and profitability. This position provides product training to the sales team in partnership with vendors and works closely with other HOLT departments. Essential Functions: • Models, promotes, and reinforces the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission., • Is a product expert on the models, configurations, and applications in an assigned product category., • Advises sales reps on compatibility, specifications, and sourcing solutions including new orders, changing existing orders, PDC availability, dealer trades, reconfiguration of on hand units and substitution of alternative models., • Stays current with annual product updates, new product introductions, product options, features and benefits, and competitive product offerings as well as industry, application, quoting and delivery trends across all Regions within Holt to provide insight for monthly forecasts and ensure that the correct models, work tools, and configurations are always in stock to meet customer demand., • Leads configuration teams to create and maintain standard configurations in Holt’s IT systems as well as maintain inventory model mix levels that balance the needs of inventory turns, market share, cost, customer benefits, and profitability., • Maintains configuration compatibility with vendor ordering processes., • Reviews sales order/rental agreement, ensure the configuration of the machines is correct, and executes the winning sourcing strategy in partnership with the sales team, deal team, product support team, other dealerships, and vendor product sourcing methods. Submits advanced orders for specialty products., • Demonstrates a collaborative and wholistic approach while working closely with the other dealership teams (Deal Team, Worktools, Heavy Rents, Texas First, SITECH, Product Support, Sales Team, Yard Team, Transport) and vendors (Caterpillar, Weiler, others) to forecast demand, ensure the timely availability of machines, optimize inventory, and support customers., • Maintains relationships with all North American Caterpillar dealers and vendors to trade and source., • Communicates Annual Product Updates, NPI information, and other product update information in a meaningful way to the organization., • Provides product training to the Sales Team in partnership with vendors., • Maintains accurate and up-to-date inventory records, ensuring proper tracking, storage, and documentation of products based on product specifications and technical requirements., • Conducts regular cycle counts, audits, and reconciliation of inventory to ensure accuracy and resolve discrepancies while monitoring inventory performance metrics, such as product turnover rates, stock levels, and order fulfillment performance., • Prepares and maintains inventory reports and dashboards, analyzing sales and inventory data to identify trends, adjust inventory levels, product mix, and stock forecasts to match the needs of current and future customers., • Assists with returns, exchanges, rework, insurance claims, product failure investigations. Engage with training with In-Territory sales team on product. Engage with In-Territory yard team on Inventory process training. Works safely always and adheres to all applicable safety policies; complies with all company policies, procedures, and standards., • Calculates demo and fuel charges for all new machines., • Submits insurance claims on damages to any new machine shipped from the factory via vessel, rail, or domestic truck., • Conducts physical inventory counts at each assigned location., • Assists Inventory Control Technicians (ICTs), New Inventory, Heavy Rental Fleet and Texas First Rental Fleet with any inventory related questions., • Engages with the accounting department to reconcile any inventory accounts., • Extensive experience with Caterpillar Machines and Worktools and knowledge of their specifications, features, and applications in various industries., • Understanding of heavy equipment inventory management, including phase-in/phase-out product strategies and updates., • Strong analytical and data interpretation skills, with the ability to identify trends and adjust strategies accordingly., • Solid understanding of inventory control principles, demand forecasting, and supply chain best practices., • Excellent organizational skills, attention to detail, and the ability to manage multiple tasks in a fast-paced environment., • A strong collaborative approach with excellent customer service skills to work across teams and interact with vendors and internal teams, • Effective communication and interpersonal skills to share technical product and inventory management insights., • Proactive problem-solving skills and curiosity to optimize inventory management, with a deep understanding of the products and their specific requirements., • Proficiency in Microsoft Excel and other data management tools for reporting and analysis., • Ability to read, analyze and interpret technical procedures, installation instructions, parts lists, compatibility charts and legal documents., • Presentation skills after small and large groups., • Computer and related software knowledge and/or experience. (Excel, Word, PowerPoint, Adobe, etc..), • Solid time management and organization skills, and strong attention to detail, • Bachelor’s degree in Supply Chain Management, Business Administration, Industrial Engineering, or a related field (or equivalent experience)., • This position involves extended periods in a stationary position, conversing with multiple parties, and giving presentations. Additionally, frequent movement inside the office to deliver paperwork., • Frequently works at fast pace with unscheduled interruptions., • Regularly works indoors and may be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity. Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-HCT

Job Description Experienced Generator Technician, proficient in diesel and natural gas generator service/repair, needed in the San Antonio area to work on both mechanical and electrical side of Generator business. Repairs and services generators Inspects, repairs, services, and starts up load bank test requirements on equipment Troubleshoots equipment and services generator components including alternators, wiring, switches, and batteries. Applies proper engine technical skills in inspection, disassembly, failure analysis, assembly, diagnosis, and engine operating Identifies the problem and cause of failure through logical troubleshooting steps, determines corrective action Repairs and troubleshoots engines Performs on site maintenance and repair to customers equipment Competitive salary, company laptop, company vehicle, cell phone, full medical benefits, and 401K offered Some Travel Required- MVR Drug and Alcohol Screen and Background Screening also required

Job Description Are you looking to elevate your skills and grow as a technician, look no further! We recruit on behalf of a well-established company in the Power Generation industry that is currently expanding their team in the San Antonio/Austin area. This is a great opportunity that you don't want to miss. Position Offers • $25-$35/hour, depending on experience + overtime opportunities. If your target pay is higher, we still encourage you to apply—we could request adjustments based on experience and market conditions, • Excellent, comprehensive benefits, • Company pays 100% of employee's health insurance, • PTO, Work vehicle, cell phone and tablet/laptop provided, • Experience working on standby generators and related equipment up to 2 MW, • Able to conduct a load bank test and perform full PMs, • Natural gas and/or diesel engine knowledge, • ATS and switchgear experience preferred, • Service, repair, modify and diagnosis (variety of brands) standby power generators, • Perform failure analysis, emergency field service and/or repairs for customers, • Conduct start-ups, PM service and load bank tests, • Maintain and repair ATSs (both regular and bypass units), • Work on a variety of commercial/industrial customer sites (hospitals, nursing homes, office buildings, fire stations, correctional facilities, events, etc). Application Process If your experience matches the description above, submit your resume, and one of our recruiters will be in touch to tell you more about the position and learn more about your experience and aspirations. If your experience does not match this job description, we still encourage you to reach out to one of our recruiters, so we can learn about your professional aspirations for future job openings. About Bemana Bemana provides recruiting services to the nation's equipment and industrial sectors. Our clients and candidates value us for our specialized recruiting expertise, vast knowledge of the equipment and industrial job market, and ability to solve their most challenging employment needs. We have successfully recruited thousands of top-level professionals filling a wide range of management, sales, engineering, and technical positions across the nation. Welcome to Bemana and we look forward to getting to know more about you. Referral Program Bemana offers a $500 reward for referrals that lead to a hire. So, if this job or location is not for you, but you know someone that might be interested, send them this link and we'll send you a check if they get hired. Terms & conditions apply.

Job Description TPG is actively seeking skilled Prototype Vehicle Build Mechanics to join our team based in the San Antonio, TX area. Join our team supporting a leading global company dedicated to building state-of-the-art commercial vehicles. Successful candidates will support the research and development efforts to create the next generation of commercial transport solutions, driving innovation in the automotive and truck industry. Job Summary: The Prototype Vehicle Build Mechanic will be responsible for servicing and repairing complex mechanical and electronic systems of vehicles, as well as providing support with in-test inspections, vehicle repairs, and more. This position will involve hands-on construction or modification of prototype vehicles, including medium duty trucks, buses, and heavy-duty trucks with various powertrains such as diesel, electric, and alternative fuels. The Vehicle Build Mechanic will work on 2nd or 3rd shift. The build operations department supports the R&D departments in the day-to-day operations and ensures that testing is not interrupted due to equipment failure or delays. Key Responsibilities: • Diagnoses mechanical, hardware, software and systems failures using established procedures., • Performs maintenance, testing and calibration of repaired products., • Prepares reports for analysis of product failure trends and service ability issues., • Scope may include assembling, disassembling, inspect, repair and install components on vehicles - including engines and powertrain. Either modify existing vehicles or build units from the ground up., • Conduct welding fabrication with Tig, Mig, Stick, Oxy-Acetylene Welding skills & plasma cutting., • Perform electrical troubleshooting and diagnostics. Required Skills and Qualifications: • Previous mechanic experience involving truck and engine assembly, repair, and fabrication. Strong mechanical aptitude., • Vehicle experience that includes some of the following: commercial vehicles, off-highway vehicles, agriculture vehicles, and/or passenger vehicles., • Experience with alternative fuels, including EV (electric vehicles), and/or Propane., • Experience with Cummins/Allison/Eaton/Duramax., • Training/Education as a Truck mechanic, as a Diesel Engine mechanic., • Experience with welding fabrication with Tig, Mig, Stick, Oxy-Acetylene Welding skills & plasma cutting., • Knowledge of multimeter and/or module programming., • Prior dealership or fleet service experience., • At least 3 years of experience supporting engineering activities and/or automotive or diesel mechanic experience., • Safety Sensitive position requiring all persons assigned to activity be drug-free and successfully pass pre-employment DOT drug screening prior to employment., • Requirement to lift at least 50 lbs. At Technical Professionals Group, we are a dedicated team of automotive professionals with deep-rooted passion for the automotive industry. Our mission is to work collaboratively with leading OEM's and manufacturers to meticulously test and validate vehicles, ensuring they meet the highest standards of performance and safety. While providing the best results for our customers and fostering professional growth for our team members. We are excited to be at the forefront of the automotive industry, contributing to its evolution and working alongside some of the biggest names in the business. To discover more about our services, please visit our website at .

Job DescriptionDescription: JOB SUMMARY The Mechanic performs maintenance on all company assets, overhauls minor components and replacements and assists all mechanics, mechanic helpers and technicians with electrical, hydraulic, computer diagnostics. This position also assists technicians with major overhauls on major components, performs scheduled and unscheduled preventative maintenance and responds to service and road calls. DUTIES & ESSENTIAL JOB FUNCTIONS AND RESPONSIBILITIES • Wear appropriate personal protective equipment (PPE) when and where required., • Perform preventive maintenance or repairs on company assets according to work pending reports, VCR reports, PM schedules, and the direction of the Maintenance Team., • Document repair operations and time-tracking in accordance with company procedures., • Requisition parts as necessary., • Perform failure analysis and reporting findings to maintenance management., • Ensure work area is clean and neat., • Maintain service truck readiness including safety equipment, tools, equipment, and cleanliness., • Assist co - workers with diagnostics and repairs., • Comply with company safety policies and with applicable state and federal regulations., • Report immediately any safety violations and correct unsafe acts or conditions., • Conduct technical inspections and document findings., • Maintain repair order documentation to include repair description, parts used, and repair times., • Perform monthly inventories as required., • Must possess own tools.

Job Description Position Overview: TPG is actively seeking skilled Product Launch Prototype Mechanics who are "road warriors" to join our team based out of the San Antonio, TX area. Join our team supporting a leading global company dedicated to building state-of-the-art commercial vehicles. Successful candidates will support the research and development efforts to create the next generation of commercial transport solutions, driving innovation in the automotive and truck industry. Job Summary: The Product Launch Prototype Mechanic will play a pivotal role in supporting prototype vehicle assembly processes across multiple locations, ensuring adherence to established timelines and quality standards. This position is based in the San Antonio, Texas area, with a travel requirement of up to 80%. Primarily to Escobedo, Mexico; Tulsa, Oklahoma; Laredo, Texas; and other designated sites. Proficiency in both English and Spanish is essential to facilitate effective communication with diverse plant teams. The Product Launch Prototype Mechanic will also be responsible for servicing and repairing complex mechanical and electronic systems of vehicles, as well as providing support with in-test inspections, vehicle repairs, and more. This position will involve hands-on construction or modification of prototype vehicles, including medium duty trucks, buses, and heavy-duty trucks with various powertrains such as diesel, electric, and alternative fuels. The build operations department supports the R&D departments in the day-to-day operations and ensures that testing is not interrupted due to equipment failure or delays. Key Responsibilities: • Support product launches at various locations, ensuring adherence to timelines and quality standards., • Follow detailed manuals and written instructions for vehicle assembly processes., • Communicate effectively with engineers, Mechanics, and plant teams to ensure alignment and problem-solving during product launches., • Diagnoses mechanical, hardware, software and systems failures using established procedures., • Performs maintenance, testing and calibration of repaired products., • Prepares reports for analysis of product failure trends and service ability issues., • Scope may include assembling, disassembling, inspect, repair and install components on vehicles - including engines and powertrain. Either modify existing vehicles or build units from the ground up., • Conduct welding fabrication with Tig, Mig, Stick, Oxy-Acetylene Welding skills & plasma cutting., • Perform electrical troubleshooting and diagnostics., • Previous mechanic experience involving truck and engine assembly, repair, and fabrication. Strong mechanical aptitude., • Vehicle experience that includes some of the following: commercial vehicles, off-highway vehicles, agriculture vehicles, and/or passenger vehicles., • Experience with alternative fuels, including EV (electric vehicles), and/or Propane., • Experience with Cummins/Allison/Eaton/Duramax., • Training/Education as a Truck mechanic, as a Diesel Engine mechanic., • Experience with welding fabrication with Tig, Mig, Stick, Oxy-Acetylene Welding skills & plasma cutting., • Knowledge of multimeter and/or module programming., • Prior dealership or fleet service experience., • Basic knowledge of Microsoft Office - Outlook, Excel, PowerPoint., • Ability to follow detailed manuals and written instructions for vehicle assembly., • Strong problem-solving skills and the ability to work collaboratively in a team environment., • At least 3 years of experience supporting engineering activities and/or automotive or diesel mechanic experience., • Safety Sensitive position requiring all persons assigned to activity be drug-free and successfully pass drug screening prior to employment., • Requirement to lift at least 50 lbs., • Must provide own tools for their use on the job at main facility; company will have access to specialty equipment and will provide tools to travel locations., • While the base location is in the San Antonio, Texas area, the position requires the ability to travel up to 80%. At Technical Professionals Group, we are a dedicated team of automotive professionals with deep-rooted passion for the automotive industry. Our mission is to work collaboratively with leading OEM's and manufacturers to meticulously test and validate vehicles, ensuring they meet the highest standards of performance and safety. While providing the best results for our customers and fostering professional growth for our team members. We are excited to be at the forefront of the automotive industry, contributing to its evolution and working alongside some of the biggest names in the business. To discover more about our services, please visit our website at .

Job DescriptionDescription: Diesel Mechanic JOB SUMMARY The Mechanic performs maintenance on all company assets, overhauls minor components and replacements and assists all mechanics, mechanic helpers and technicians with electrical, hydraulic, computer diagnostics. This position also assists technicians with major overhauls on major components, performs scheduled and unscheduled preventative maintenance and responds to service and road calls. DUTIES & ESSENTIAL JOB FUNCTIONS AND RESPONSIBILITIES • Wear appropriate personal protective equipment (PPE) when and where required., • Perform preventive maintenance or repairs on company assets according to work pending reports, VCR reports, PM schedules, and the direction of the Maintenance Team., • Document repair operations and time-tracking in accordance with company procedures., • Requisition parts as necessary., • Perform failure analysis and reporting findings to maintenance management., • Ensure work area is clean and neat., • Maintain service truck readiness including safety equipment, tools, equipment, and cleanliness., • Assist co - workers with diagnostics and repairs., • Comply with company safety policies and with applicable state and federal regulations., • Report immediately any safety violations and correct unsafe acts or conditions., • Conduct technical inspections and document findings., • Maintain repair order documentation to include repair description, parts used, and repair times., • Perform monthly inventories as required., • Must possess own tools.

Job DescriptionSaddles, Krispy Kreme Our Krispy Kreme Managers are the best in the business. As the leader in the shop, you are the “Guardian of the Original Glazed”--making sure all products, personnel and store cleanliness are up to Krispy Kreme quality standards. Weekly financials, employee supervision and general merry-making are all a part of this coveted slot. Overview of Position: The 2nd Shift Manager is responsible for assisting the Assistant General Manager and General Manager for sales and pm operations of the store. The 2nd Shift Manager maintains an organization that exceeds customer expectations, fosters teamwork among staff, develops staff members' abilities and competencies, and works to achieve the financial objectives established for the assigned location through revenue and cost management initiatives. Their long-term objective is to develop skills towards becoming an Assistant General Manager. Position Responsibilities: • Must be able to perform the responsibilities of all key store positions (Cashier, Doughnut Decorator and Doughnut Maker and Sanitation)., • Must be able to efficiently perform all duties related to opening and closing procedures., • Assist the management team with store sales efforts, which include retail sales, fundraising sales, and route sales., • Achieve business plan, sales objectives and profitability as described in the store budget by managing income and expense budgets., • Assist the management team with promoting store sales through local store marketing., • Manage company resources responsibly including cash, inventory, and equipment., • Complete required corporate reporting documentation timely and accurately., • Understand and implement procedures to maximize efficiencies and control variances in daily production of product and overall store performance., • Understand and implement store quality control procedures, including Krispy Kreme standards., • Coordinate production schedules to meet customer demands; minimizing labor hours while maximizing Hot Light hours., • Demonstrate safety consciousness and promote store safety thru meetings, postings, training, and reporting incidents to supervisor and Human Resources., • Greet customers with a sincere smile and listen carefully to their needs., • Maintain a high level of store sanitation and cleanliness., • Assist in the proper upkeep of store facility, office equipment and doughnut production line., • Assist in scheduling maintenance to prevent equipment failure., • Report any equipment failure or issues to supervisor in a timely manner., • Assist in properly maintaining and upkeep of all delivery vehicles., • Assist in coaching, training, documentation, and dispute resolution of employees., • Assist in building a team of friendly, customer-focused employees., • Demonstrate leadership in employee development., • Consistently enforce all store policies, standards, and practices and model them yourself., • Assist management team in implementing directives from Krispy Kreme corporate and Glazing Saddles management., • Maintain store organization to promote efficient operations., • Perform other related duties as assigned., • Follow all Krispy Kreme standards for Food Safety Program and HACCP Plans., • Company provides Uniform of 1-cap, 1-tee shirt, 1-name tag and 1-apron as an employee to be worn during shift. Employee must wear blue jeans (no holes, washout or ripped) and black belt. Non-Slip shoes must be worn at all times. Maintain a clean, neat Glazing Saddles issued uniform at all times. Essential Skills and Experience: • High School Diploma or equivalent, • Must be able to read and communicate using the English language, • Ability to make simple mathematical calculations, • Food Service experience, • Proficient in Microsoft Excel, Word and Outlook, • Pleasant disposition, sociable, accommodating nature, and enthusiastic, • Ability to organize and manage multiple priorities, • Ability to lead people and get results through others, • Ability to work with minimal onsite supervision, • Problem analysis and problem resolution at both a strategic and functional level Valued but not required skills and experience: • Experience with basic equipment repair and maintenance, • Hot Schedules Experience, • Manufacturing equipment knowledge Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing duties of job, employee is occasionally required to stand, walk, sit, climb; handle objects, tools or controls; reach with extremities; hear, see and communicate with employees and customers. Must lift and/or move up to 50 pounds, occasionally overhead. Must be able to fill two (2) doughnuts at one time. Must be able to operate a forklift or pallet jack; pushing or pulling up to 2,500 lbs.

Job DescriptionSaddles, Krispy Kreme Our Krispy Kreme Managers are the best in the business. As the leader in the shop, you are the “Guardian of the Original Glazed”--making sure all products, personnel and store cleanliness are up to Krispy Kreme quality standards. Weekly financials, employee supervision and general merry-making are all a part of this coveted slot. Overview of Position: The 2nd Shift Manager is responsible for assisting the Assistant General Manager and General Manager for sales and pm operations of the store. The 2nd Shift Manager maintains an organization that exceeds customer expectations, fosters teamwork among staff, develops staff members' abilities and competencies, and works to achieve the financial objectives established for the assigned location through revenue and cost management initiatives. Their long-term objective is to develop skills towards becoming an Assistant General Manager. Position Responsibilities: • Must be able to perform the responsibilities of all key store positions (Cashier, Doughnut Decorator and Doughnut Maker and Sanitation)., • Must be able to efficiently perform all duties related to opening and closing procedures., • Assist the management team with store sales efforts, which include retail sales, fundraising sales, and route sales., • Achieve business plan, sales objectives and profitability as described in the store budget by managing income and expense budgets., • Assist the management team with promoting store sales through local store marketing., • Manage company resources responsibly including cash, inventory, and equipment., • Complete required corporate reporting documentation timely and accurately., • Understand and implement procedures to maximize efficiencies and control variances in daily production of product and overall store performance., • Understand and implement store quality control procedures, including Krispy Kreme standards., • Coordinate production schedules to meet customer demands; minimizing labor hours while maximizing Hot Light hours., • Demonstrate safety consciousness and promote store safety thru meetings, postings, training, and reporting incidents to supervisor and Human Resources., • Greet customers with a sincere smile and listen carefully to their needs., • Maintain a high level of store sanitation and cleanliness., • Assist in the proper upkeep of store facility, office equipment and doughnut production line., • Assist in scheduling maintenance to prevent equipment failure., • Report any equipment failure or issues to supervisor in a timely manner., • Assist in properly maintaining and upkeep of all delivery vehicles., • Assist in coaching, training, documentation, and dispute resolution of employees., • Assist in building a team of friendly, customer-focused employees., • Demonstrate leadership in employee development., • Consistently enforce all store policies, standards, and practices and model them yourself., • Assist management team in implementing directives from Krispy Kreme corporate and Glazing Saddles management., • Maintain store organization to promote efficient operations., • Perform other related duties as assigned., • Follow all Krispy Kreme standards for Food Safety Program and HACCP Plans., • Company provides Uniform of 1-cap, 1-tee shirt, 1-name tag and 1-apron as an employee to be worn during shift. Employee must wear blue jeans (no holes, washout or ripped) and black belt. Non-Slip shoes must be worn at all times. Maintain a clean, neat Glazing Saddles issued uniform at all times. Essential Skills and Experience: • High School Diploma or equivalent, • Must be able to read and communicate using the English language, • Ability to make simple mathematical calculations, • Food Service experience, • Proficient in Microsoft Excel, Word and Outlook, • Pleasant disposition, sociable, accommodating nature, and enthusiastic, • Ability to organize and manage multiple priorities, • Ability to lead people and get results through others, • Ability to work with minimal onsite supervision, • Problem analysis and problem resolution at both a strategic and functional level Valued but not required skills and experience: • Experience with basic equipment repair and maintenance, • Hot Schedules Experience, • Manufacturing equipment knowledge Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing duties of job, employee is occasionally required to stand, walk, sit, climb; handle objects, tools or controls; reach with extremities; hear, see and communicate with employees and customers. Must lift and/or move up to 50 pounds, occasionally overhead. Must be able to fill two (2) doughnuts at one time. Must be able to operate a forklift or pallet jack; pushing or pulling up to 2,500 lbs.

Job DescriptionSaddles, Krispy Kreme Our Krispy Kreme Managers are the best in the business. As the leader in the shop, you are the “Guardian of the Original Glazed”--making sure all products, personnel and store cleanliness are up to Krispy Kreme quality standards. Weekly financials, employee supervision and general merry-making are all a part of this coveted slot. Overview of Position: The 2nd Shift Manager is responsible for assisting the Assistant General Manager and General Manager for sales and pm operations of the store. The 2nd Shift Manager maintains an organization that exceeds customer expectations, fosters teamwork among staff, develops staff members' abilities and competencies, and works to achieve the financial objectives established for the assigned location through revenue and cost management initiatives. Their long-term objective is to develop skills towards becoming an Assistant General Manager. Position Responsibilities: • Must be able to perform the responsibilities of all key store positions (Cashier, Doughnut Decorator and Doughnut Maker and Sanitation)., • Must be able to efficiently perform all duties related to opening and closing procedures., • Assist the management team with store sales efforts, which include retail sales, fundraising sales, and route sales., • Achieve business plan, sales objectives and profitability as described in the store budget by managing income and expense budgets., • Assist the management team with promoting store sales through local store marketing., • Manage company resources responsibly including cash, inventory, and equipment., • Complete required corporate reporting documentation timely and accurately., • Understand and implement procedures to maximize efficiencies and control variances in daily production of product and overall store performance., • Understand and implement store quality control procedures, including Krispy Kreme standards., • Coordinate production schedules to meet customer demands; minimizing labor hours while maximizing Hot Light hours., • Demonstrate safety consciousness and promote store safety thru meetings, postings, training, and reporting incidents to supervisor and Human Resources., • Greet customers with a sincere smile and listen carefully to their needs., • Maintain a high level of store sanitation and cleanliness., • Assist in the proper upkeep of store facility, office equipment and doughnut production line., • Assist in scheduling maintenance to prevent equipment failure., • Report any equipment failure or issues to supervisor in a timely manner., • Assist in properly maintaining and upkeep of all delivery vehicles., • Assist in coaching, training, documentation, and dispute resolution of employees., • Assist in building a team of friendly, customer-focused employees., • Demonstrate leadership in employee development., • Consistently enforce all store policies, standards, and practices and model them yourself., • Assist management team in implementing directives from Krispy Kreme corporate and Glazing Saddles management., • Maintain store organization to promote efficient operations., • Perform other related duties as assigned., • Follow all Krispy Kreme standards for Food Safety Program and HACCP Plans., • Company provides Uniform of 1-cap, 1-tee shirt, 1-name tag and 1-apron as an employee to be worn during shift. Employee must wear blue jeans (no holes, washout or ripped) and black belt. Non-Slip shoes must be worn at all times. Maintain a clean, neat Glazing Saddles issued uniform at all times. Essential Skills and Experience: • High School Diploma or equivalent, • Must be able to read and communicate using the English language, • Ability to make simple mathematical calculations, • Food Service experience, • Proficient in Microsoft Excel, Word and Outlook, • Pleasant disposition, sociable, accommodating nature, and enthusiastic, • Ability to organize and manage multiple priorities, • Ability to lead people and get results through others, • Ability to work with minimal onsite supervision, • Problem analysis and problem resolution at both a strategic and functional level Valued but not required skills and experience: • Experience with basic equipment repair and maintenance, • Hot Schedules Experience, • Manufacturing equipment knowledge Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing duties of job, employee is occasionally required to stand, walk, sit, climb; handle objects, tools or controls; reach with extremities; hear, see and communicate with employees and customers. Must lift and/or move up to 50 pounds, occasionally overhead. Must be able to fill two (2) doughnuts at one time. Must be able to operate a forklift or pallet jack; pushing or pulling up to 2,500 lbs.

Job DescriptionSaddles, Krispy Kreme Our Krispy Kreme Managers are the best in the business. As the leader in the shop, you are the “Guardian of the Original Glazed”--making sure all products, personnel and store cleanliness are up to Krispy Kreme quality standards. Weekly financials, employee supervision and general merry-making are all a part of this coveted slot. Overview of Position: The 2nd Shift Manager is responsible for assisting the Assistant General Manager and General Manager for sales and pm operations of the store. The 2nd Shift Manager maintains an organization that exceeds customer expectations, fosters teamwork among staff, develops staff members' abilities and competencies, and works to achieve the financial objectives established for the assigned location through revenue and cost management initiatives. Their long-term objective is to develop skills towards becoming an Assistant General Manager. Position Responsibilities: • Must be able to perform the responsibilities of all key store positions (Cashier, Doughnut Decorator and Doughnut Maker and Sanitation)., • Must be able to efficiently perform all duties related to opening and closing procedures., • Assist the management team with store sales efforts, which include retail sales, fundraising sales, and route sales., • Achieve business plan, sales objectives and profitability as described in the store budget by managing income and expense budgets., • Assist the management team with promoting store sales through local store marketing., • Manage company resources responsibly including cash, inventory, and equipment., • Complete required corporate reporting documentation timely and accurately., • Understand and implement procedures to maximize efficiencies and control variances in daily production of product and overall store performance., • Understand and implement store quality control procedures, including Krispy Kreme standards., • Coordinate production schedules to meet customer demands; minimizing labor hours while maximizing Hot Light hours., • Demonstrate safety consciousness and promote store safety thru meetings, postings, training, and reporting incidents to supervisor and Human Resources., • Greet customers with a sincere smile and listen carefully to their needs., • Maintain a high level of store sanitation and cleanliness., • Assist in the proper upkeep of store facility, office equipment and doughnut production line., • Assist in scheduling maintenance to prevent equipment failure., • Report any equipment failure or issues to supervisor in a timely manner., • Assist in properly maintaining and upkeep of all delivery vehicles., • Assist in coaching, training, documentation, and dispute resolution of employees., • Assist in building a team of friendly, customer-focused employees., • Demonstrate leadership in employee development., • Consistently enforce all store policies, standards, and practices and model them yourself., • Assist management team in implementing directives from Krispy Kreme corporate and Glazing Saddles management., • Maintain store organization to promote efficient operations., • Perform other related duties as assigned., • Follow all Krispy Kreme standards for Food Safety Program and HACCP Plans., • Company provides Uniform of 1-cap, 1-tee shirt, 1-name tag and 1-apron as an employee to be worn during shift. Employee must wear blue jeans (no holes, washout or ripped) and black belt. Non-Slip shoes must be worn at all times. Maintain a clean, neat Glazing Saddles issued uniform at all times. Essential Skills and Experience: • High School Diploma or equivalent, • Must be able to read and communicate using the English language, • Ability to make simple mathematical calculations, • Food Service experience, • Proficient in Microsoft Excel, Word and Outlook, • Pleasant disposition, sociable, accommodating nature, and enthusiastic, • Ability to organize and manage multiple priorities, • Ability to lead people and get results through others, • Ability to work with minimal onsite supervision, • Problem analysis and problem resolution at both a strategic and functional level Valued but not required skills and experience: • Experience with basic equipment repair and maintenance, • Hot Schedules Experience, • Manufacturing equipment knowledge Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing duties of job, employee is occasionally required to stand, walk, sit, climb; handle objects, tools or controls; reach with extremities; hear, see and communicate with employees and customers. Must lift and/or move up to 50 pounds, occasionally overhead. Must be able to fill two (2) doughnuts at one time. Must be able to operate a forklift or pallet jack; pushing or pulling up to 2,500 lbs.

Job Description This position is contingent on contract award. The Electronics Design & Analysis Engineer position is located in San Antonio, TX. RESPONSIBILITIES: • Work directly with Project Team Lead and associated Electrical Engineers on a given project., • Support new designs from conception, analysis, reliability, fabrication, integration, and test., • Provide design support and guidance in various aspects of electrical/electronic systems development., • Be familiar with NASA and DoD specifications for electronics component design and development., • Prepare product reliability plans, establish requirements for and monitor reliability programs., • Perform or review reliability analyses., • Assess performance with respect to requirements., • Evaluate effectiveness of the failure reporting, analysis, and corrective action implementation, • Prepare reports., • Establish reliability models and utilize models for systems and subsystems analysis., • Develop component test stand architectures for various components., • Design and generate electrical components and lab instrumentation test system designs., • Develop and or modify LabVIEW code for various test systems., • Develop detailed test verification procedures., • Work with electrical and mechanical technicians to build and test designed systems., • Develop and test various breakout boxes and digital/analog sensor emulation systems., • Perform electrical evaluation/selection of instrumentation., • Troubleshoot and repair existing test systems., • Conduct analog and digital printed circuit board design for various application needs., • Develop test software modules to perform specific tests., • Work with eCAD designers to develop printed circuit board designs., • Other duties as assigned. REQUIRED: This position has been posted at multiple levels (must meet minimum level indicated). Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. • This position requires US Citizenship or Permanent Resident status due to the sensitivity of customer related information., • Must have space industry or DoD work experience., • Must have a bachelor's degree in the field of engineering, or a related field., • Must have 7+ years of recent and related work experience., • Prior experience with Power Supply Design, Power supply soft start circuit design, and switching regulators., • Prior experience with power supply remote senses, power distribution for PCB layout, Power Supply Phase Impedance measurements, and Power Supply efficiency calculation., • Digital, analog, or RF design and analysis, including analyses such as Failure Modes, Effects and Criticality Analysis (FMECA), Worst Case Analysis (WCA), Electronic Parts Stress Analysis (PSA), Single-Events Effects Analysis (SEEA), • Prior experience with electrical schematic entry and printed circuit board layout tools such as PSpice, LTSpice, and/or Altium Designer, and version control software such as Subversion (SVN)., • Use of computer aided engineering tools, including MathWorks/MATLAB, etc., • Prior experience in test of power supply and conditioning systems., • Prior experience with bonding and grounding., • Prior experience with circuit design of analog PCB, digital PCB, and power PCB., • Prior experience with data acquisition systems (especially National Instruments) and LabVIEW code development. DESIRED: • Hands-on experience in the design, build, and test of embedded systems., • Prior experience with circuit simulation tools such as PSpice, OrCAD, Multisim, etc., • Experience with hardware and VHDL-based development for Space applications., • Knowledge with Linux application/embedded code development., • Familiarity with the Linux operating system and programming in C/C++ and Python., • Prior experience with design and testing cable harnesses, design and testing of analog instrumentation systems design and testing of stepper and brushless DC-DC control circuits, and design and testing of power supply and conditioning systems., • Experience with test hardware such as oscilloscopes, multi-meters, logic analyzers, function generators, electronic load banks, power supplies, power analyzers., • Prior experience in design and test of analog instrumentation systems., • Project based experience designing, building, testing, and troubleshooting power distribution electronics, battery systems, and other electrical hardware (requirements definition, system modeling and simulation; circuit analysis; PCB design, fabrication, and assembly; harness design and fabrication; requirements verification)., • Excellent communication skills and the ability to work in a multi-disciplinary team of mechanical, electrical, and software engineers designing and building world-class, NASA space-flight hardware. WORK LOCATION: • This position is located onsite with possible hybrid work arrangement., • This position offers a 9/80 schedule, every other Friday off., • This position may require some travel. BACKGROUND INVESTIGATIONS REQUIRED: All Bastion employees must be able to pass a national agency check, some positions require a clearance and will require an extensive background verification/check process. DRUG AND ALCOHOL SCREENING REQUIRED: All Bastion employees must be able to pass pre-employment drug screen; some contracts require participation in periodic random drug and alcohol screening programs. STANDARD BASTION REQUIREMENTS: • Must have experience with Microsoft Office Suite., • All of Bastion's employees must be team players., • Able to communicate effectively, verbally and in written form, with internal and external customers., • Able to follow company programs, processes, procedures, practices, requirements, goals, and objectives., • Must have a strong work ethic and must be safety culture oriented., • Must be organized with good time management skills., • Generally, an office environment, but can involve inside or outside work depending on the task., • Work may involve sitting or standing for extended periods (90% of the time)., • May require lifting and carrying up to 25 lbs. (5% of the time)., • Regular attendance in accordance with an established work schedule is critical., • Ability to work outside normal schedule and adjust schedule to meet peak periods and surge requirements. BASTION BENEFITS: Bastion offers a wide range of benefits for their full-time employees; medical, prescription, dental, vision, AD&D, disability benefits, life insurance, retirement 401k, vacation, sick pay, holidays, and flexible work schedules (when available). We also support career advancement through professional training and development. ABOUT BASTION: Bastion offers career opportunities with competitive benefits, exciting possibilities for advancement, and an exceptional work environment; the well-being of our employees is a priority, and our flexibility allows our employees a great work life balance. Our culture is based on strong business ethics, integrity, and professionalism. Our team members are known for their initiative and high-quality work. When it comes to our employees, we value, respect, and help them grow in their careers. WORKPLACE EXCELLENCE: At Bastion, we are passionate about our people and our safety culture. We are committed to a journey toward being a more inclusive and diverse company, that philosophy fosters an environment of collaboration across cultures. Individual thoughts, opinions, and perspectives bring value and help us develop solutions for challenging problems, they make us more inventive, and more resilient. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status. Bastion participates in e-Verify. #AssociateLevel #LI-Onsite BT-25129 Job Posted by ApplicantPro

Job DescriptionGlazing Saddles, Krispy Kreme Our Krispy Kreme Managers are the best in the business. As the leader in the shop, you are the “Guardian of the Original Glazed” - making sure all products, personnel and store cleanliness are up to Krispy Kreme quality standards. Weekly financials, employee supervision and general merry-making are all a part of this coveted slot. Overview of Position: The 1st Shift Manager is responsible for assisting the Assistant General Manager and General Manager for sales and am operations of the store. The 1st Shift Manager maintains an organization that exceeds customer expectations, fosters teamwork among staff, develops staff members' abilities and competencies, and works to achieve the financial objectives established for the assigned location through revenue and cost management initiatives. Their long-term objective is to develop skills towards becoming an Assistant General Manager. Position Responsibilities: • Must be able to perform the responsibilities of all key store positions (Cashier, Doughnut Decorator and Doughnut Maker and Sanitation)., • Must be able to efficiently perform all duties related to opening and closing procedures., • Assist the management team with store sales efforts, which include retail sales, fundraising sales, and route sales., • Achieve business plan, sales objectives and profitability as described in the store budget by managing income and expense budgets., • Assist the management team with promoting store sales through local store marketing., • Manage company resources responsibly including cash, inventory, and equipment., • Complete required corporate reporting documentation timely and accurately., • Understand and implement procedures to maximize efficiencies and control variances in daily production of product and overall store performance., • Understand and implement store quality control procedures, including Krispy Kreme standards., • Coordinate production schedules to meet customer demands; minimizing labor hours while maximizing Hot Light hours., • Demonstrate safety consciousness and promote store safety thru meetings, postings, training, and reporting incidents to supervisor and Human Resources., • Greet customers with a sincere smile and listen carefully to their needs., • Maintain a high level of store sanitation and cleanliness., • Maintain a clean, neat Glazing Saddles issued uniform at all times., • Company provides uniform of 1-cap, 1-polo shirt, 1-name tag and 1-apron to an employee to be worn during shift. Employee must wear blue jeans (no holes, washout or ripped) and black belt. Non-Slip shoes or boots must be worn at all times. Maintain a clean, neat Glazing Saddles-issued uniform at all times., • Assist in the proper upkeep of store facility, office equipment and doughnut production line., • Assist in scheduling maintenance to prevent equipment failure., • Report any equipment failure or issues to supervisor in a timely manner., • Assist in properly maintaining and upkeep all delivery vehicles., • Assist in coaching, training, documentation, and dispute resolution of employees., • Assist in building a team of friendly customer-focused employees., • Demonstrate leadership in employee development., • Consistently enforce all store policies, standards, and practices and model them yourself., • Assist management team in implementing directives from Krispy Kreme corporate and Glazing Saddles management., • Maintain store organization to promote efficient operations., • Performs other related duties as assigned., • Follow all Krispy Kreme standards for Food Safety Program and HACCP Plans., • Assist in Follow up and resolve all Krispy Kreme, Glazing Saddles & Store customer, employee and vendor complaints as soon as possible and according to company standards. Essential Skills and Experience: • High School Diploma or equivalent, • Must be able to read and communicate using the English language, • Ability to make simple mathematical calculations, • Food Service experience, • Proficient in Microsoft Excel, Word and Outlook, • Pleasant disposition, sociable, accommodating nature, and enthusiastic, • Ability to organize and manage multiple priorities, • Ability to lead people and get results through others, • Ability to work with minimal onsite supervision, • Problem analysis and problem resolution at both a strategic and functional level Valued but not required skills and experience: • Experience with basic equipment repair and maintenance, • Hot Schedules Experience, • Manufacturing equipment knowledge Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing duties of job, employee is occasionally required to stand, walk, sit, climb; handle objects, tools or controls; reach with extremities; hear, see and communicate with employees and customers. Must lift and/or move up to 50 pounds, occasionally overhead. Must be able to fill two (2) doughnuts at one time. Must be able to operate a forklift or pallet jack; pushing or pulling up to 2,500 lbs.

Job DescriptionGlazing Saddles, Krispy Kreme Our Krispy Kreme Managers are the best in the business. As the leader in the shop, you are the “Guardian of the Original Glazed” - making sure all products, personnel and store cleanliness are up to Krispy Kreme quality standards. Weekly financials, employee supervision and general merry-making are all a part of this coveted slot. Overview of Position: The 1st Shift Manager is responsible for assisting the Assistant General Manager and General Manager for sales and am operations of the store. The 1st Shift Manager maintains an organization that exceeds customer expectations, fosters teamwork among staff, develops staff members' abilities and competencies, and works to achieve the financial objectives established for the assigned location through revenue and cost management initiatives. Their long-term objective is to develop skills towards becoming an Assistant General Manager. Position Responsibilities: • Must be able to perform the responsibilities of all key store positions (Cashier, Doughnut Decorator and Doughnut Maker and Sanitation)., • Must be able to efficiently perform all duties related to opening and closing procedures., • Assist the management team with store sales efforts, which include retail sales, fundraising sales, and route sales., • Achieve business plan, sales objectives and profitability as described in the store budget by managing income and expense budgets., • Assist the management team with promoting store sales through local store marketing., • Manage company resources responsibly including cash, inventory, and equipment., • Complete required corporate reporting documentation timely and accurately., • Understand and implement procedures to maximize efficiencies and control variances in daily production of product and overall store performance., • Understand and implement store quality control procedures, including Krispy Kreme standards., • Coordinate production schedules to meet customer demands; minimizing labor hours while maximizing Hot Light hours., • Demonstrate safety consciousness and promote store safety thru meetings, postings, training, and reporting incidents to supervisor and Human Resources., • Greet customers with a sincere smile and listen carefully to their needs., • Maintain a high level of store sanitation and cleanliness., • Maintain a clean, neat Glazing Saddles issued uniform at all times., • Company provides uniform of 1-cap, 1-polo shirt, 1-name tag and 1-apron to an employee to be worn during shift. Employee must wear blue jeans (no holes, washout or ripped) and black belt. Non-Slip shoes or boots must be worn at all times. Maintain a clean, neat Glazing Saddles-issued uniform at all times., • Assist in the proper upkeep of store facility, office equipment and doughnut production line., • Assist in scheduling maintenance to prevent equipment failure., • Report any equipment failure or issues to supervisor in a timely manner., • Assist in properly maintaining and upkeep all delivery vehicles., • Assist in coaching, training, documentation, and dispute resolution of employees., • Assist in building a team of friendly customer-focused employees., • Demonstrate leadership in employee development., • Consistently enforce all store policies, standards, and practices and model them yourself., • Assist management team in implementing directives from Krispy Kreme corporate and Glazing Saddles management., • Maintain store organization to promote efficient operations., • Performs other related duties as assigned., • Follow all Krispy Kreme standards for Food Safety Program and HACCP Plans., • Assist in Follow up and resolve all Krispy Kreme, Glazing Saddles & Store customer, employee and vendor complaints as soon as possible and according to company standards. Essential Skills and Experience: • High School Diploma or equivalent, • Must be able to read and communicate using the English language, • Ability to make simple mathematical calculations, • Food Service experience, • Proficient in Microsoft Excel, Word and Outlook, • Pleasant disposition, sociable, accommodating nature, and enthusiastic, • Ability to organize and manage multiple priorities, • Ability to lead people and get results through others, • Ability to work with minimal onsite supervision, • Problem analysis and problem resolution at both a strategic and functional level Valued but not required skills and experience: • Experience with basic equipment repair and maintenance, • Hot Schedules Experience, • Manufacturing equipment knowledge Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing duties of job, employee is occasionally required to stand, walk, sit, climb; handle objects, tools or controls; reach with extremities; hear, see and communicate with employees and customers. Must lift and/or move up to 50 pounds, occasionally overhead. Must be able to fill two (2) doughnuts at one time. Must be able to operate a forklift or pallet jack; pushing or pulling up to 2,500 lbs.

Job DescriptionGlazing Saddles, Krispy Kreme Our Krispy Kreme Managers are the best in the business. As the leader in the shop, you are the “Guardian of the Original Glazed” - making sure all products, personnel and store cleanliness are up to Krispy Kreme quality standards. Weekly financials, employee supervision and general merry-making are all a part of this coveted slot. Overview of Position: The 1st Shift Manager is responsible for assisting the Assistant General Manager and General Manager for sales and am operations of the store. The 1st Shift Manager maintains an organization that exceeds customer expectations, fosters teamwork among staff, develops staff members' abilities and competencies, and works to achieve the financial objectives established for the assigned location through revenue and cost management initiatives. Their long-term objective is to develop skills towards becoming an Assistant General Manager. Position Responsibilities: • Must be able to perform the responsibilities of all key store positions (Cashier, Doughnut Decorator and Doughnut Maker and Sanitation)., • Must be able to efficiently perform all duties related to opening and closing procedures., • Assist the management team with store sales efforts, which include retail sales, fundraising sales, and route sales., • Achieve business plan, sales objectives and profitability as described in the store budget by managing income and expense budgets., • Assist the management team with promoting store sales through local store marketing., • Manage company resources responsibly including cash, inventory, and equipment., • Complete required corporate reporting documentation timely and accurately., • Understand and implement procedures to maximize efficiencies and control variances in daily production of product and overall store performance., • Understand and implement store quality control procedures, including Krispy Kreme standards., • Coordinate production schedules to meet customer demands; minimizing labor hours while maximizing Hot Light hours., • Demonstrate safety consciousness and promote store safety thru meetings, postings, training, and reporting incidents to supervisor and Human Resources., • Greet customers with a sincere smile and listen carefully to their needs., • Maintain a high level of store sanitation and cleanliness., • Maintain a clean, neat Glazing Saddles issued uniform at all times., • Company provides uniform of 1-cap, 1-polo shirt, 1-name tag and 1-apron to an employee to be worn during shift. Employee must wear blue jeans (no holes, washout or ripped) and black belt. Non-Slip shoes or boots must be worn at all times. Maintain a clean, neat Glazing Saddles-issued uniform at all times., • Assist in the proper upkeep of store facility, office equipment and doughnut production line., • Assist in scheduling maintenance to prevent equipment failure., • Report any equipment failure or issues to supervisor in a timely manner., • Assist in properly maintaining and upkeep all delivery vehicles., • Assist in coaching, training, documentation, and dispute resolution of employees., • Assist in building a team of friendly customer-focused employees., • Demonstrate leadership in employee development., • Consistently enforce all store policies, standards, and practices and model them yourself., • Assist management team in implementing directives from Krispy Kreme corporate and Glazing Saddles management., • Maintain store organization to promote efficient operations., • Performs other related duties as assigned., • Follow all Krispy Kreme standards for Food Safety Program and HACCP Plans., • Assist in Follow up and resolve all Krispy Kreme, Glazing Saddles & Store customer, employee and vendor complaints as soon as possible and according to company standards. Essential Skills and Experience: • High School Diploma or equivalent, • Must be able to read and communicate using the English language, • Ability to make simple mathematical calculations, • Food Service experience, • Proficient in Microsoft Excel, Word and Outlook, • Pleasant disposition, sociable, accommodating nature, and enthusiastic, • Ability to organize and manage multiple priorities, • Ability to lead people and get results through others, • Ability to work with minimal onsite supervision, • Problem analysis and problem resolution at both a strategic and functional level Valued but not required skills and experience: • Experience with basic equipment repair and maintenance, • Hot Schedules Experience, • Manufacturing equipment knowledge Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing duties of job, employee is occasionally required to stand, walk, sit, climb; handle objects, tools or controls; reach with extremities; hear, see and communicate with employees and customers. Must lift and/or move up to 50 pounds, occasionally overhead. Must be able to fill two (2) doughnuts at one time. Must be able to operate a forklift or pallet jack; pushing or pulling up to 2,500 lbs.

Job DescriptionGlazing Saddles, Krispy Kreme Our Krispy Kreme Managers are the best in the business. As the leader in the shop, you are the “Guardian of the Original Glazed” - making sure all products, personnel and store cleanliness are up to Krispy Kreme quality standards. Weekly financials, employee supervision and general merry-making are all a part of this coveted slot. Overview of Position: The 1st Shift Manager is responsible for assisting the Assistant General Manager and General Manager for sales and am operations of the store. The 1st Shift Manager maintains an organization that exceeds customer expectations, fosters teamwork among staff, develops staff members' abilities and competencies, and works to achieve the financial objectives established for the assigned location through revenue and cost management initiatives. Their long-term objective is to develop skills towards becoming an Assistant General Manager. Position Responsibilities: • Must be able to perform the responsibilities of all key store positions (Cashier, Doughnut Decorator and Doughnut Maker and Sanitation)., • Must be able to efficiently perform all duties related to opening and closing procedures., • Assist the management team with store sales efforts, which include retail sales, fundraising sales, and route sales., • Achieve business plan, sales objectives and profitability as described in the store budget by managing income and expense budgets., • Assist the management team with promoting store sales through local store marketing., • Manage company resources responsibly including cash, inventory, and equipment., • Complete required corporate reporting documentation timely and accurately., • Understand and implement procedures to maximize efficiencies and control variances in daily production of product and overall store performance., • Understand and implement store quality control procedures, including Krispy Kreme standards., • Coordinate production schedules to meet customer demands; minimizing labor hours while maximizing Hot Light hours., • Demonstrate safety consciousness and promote store safety thru meetings, postings, training, and reporting incidents to supervisor and Human Resources., • Greet customers with a sincere smile and listen carefully to their needs., • Maintain a high level of store sanitation and cleanliness., • Maintain a clean, neat Glazing Saddles issued uniform at all times., • Company provides uniform of 1-cap, 1-polo shirt, 1-name tag and 1-apron to an employee to be worn during shift. Employee must wear blue jeans (no holes, washout or ripped) and black belt. Non-Slip shoes or boots must be worn at all times. Maintain a clean, neat Glazing Saddles-issued uniform at all times., • Assist in the proper upkeep of store facility, office equipment and doughnut production line., • Assist in scheduling maintenance to prevent equipment failure., • Report any equipment failure or issues to supervisor in a timely manner., • Assist in properly maintaining and upkeep all delivery vehicles., • Assist in coaching, training, documentation, and dispute resolution of employees., • Assist in building a team of friendly customer-focused employees., • Demonstrate leadership in employee development., • Consistently enforce all store policies, standards, and practices and model them yourself., • Assist management team in implementing directives from Krispy Kreme corporate and Glazing Saddles management., • Maintain store organization to promote efficient operations., • Performs other related duties as assigned., • Follow all Krispy Kreme standards for Food Safety Program and HACCP Plans., • Assist in Follow up and resolve all Krispy Kreme, Glazing Saddles & Store customer, employee and vendor complaints as soon as possible and according to company standards. Essential Skills and Experience: • High School Diploma or equivalent, • Must be able to read and communicate using the English language, • Ability to make simple mathematical calculations, • Food Service experience, • Proficient in Microsoft Excel, Word and Outlook, • Pleasant disposition, sociable, accommodating nature, and enthusiastic, • Ability to organize and manage multiple priorities, • Ability to lead people and get results through others, • Ability to work with minimal onsite supervision, • Problem analysis and problem resolution at both a strategic and functional level Valued but not required skills and experience: • Experience with basic equipment repair and maintenance, • Hot Schedules Experience, • Manufacturing equipment knowledge Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing duties of job, employee is occasionally required to stand, walk, sit, climb; handle objects, tools or controls; reach with extremities; hear, see and communicate with employees and customers. Must lift and/or move up to 50 pounds, occasionally overhead. Must be able to fill two (2) doughnuts at one time. Must be able to operate a forklift or pallet jack; pushing or pulling up to 2,500 lbs.