Field applications engineer jobs in Rochester, New YorkCreate job alerts

Job DescriptionAbout us:Aeva’s mission is to bring the next wave of perception to a broad range of applications from automated driving to industrial robotics, consumer electronics, consumer health, security, and beyond. Aeva is transforming autonomy with its groundbreaking sensing and perception technology that integrates all key LiDAR components onto a silicon photonics chip in a compact module. Aeva 4D LiDAR sensors uniquely detect instant velocity in addition to 3D position, allowing autonomous devices like vehicles and robots to make more intelligent and safe decisions. Role Overview:Aeva is seeking to hire a talented and motivated Sr/Staff Hardware Engineer to join our EE HW team. The EE HW team owns the design, build and bring up of Aeva’s mixed-signal PCBs. As a Hardware Engineer, you may be responsible to develop a System Architecture of our LiDAR system based on product requirements. You will be working closely with all EE engineers to define the individual PCBs, their function, and interconnections.What you’ll be doing: • Break down product requirements into an architecture and EE PCB designs and their interconnections, • Work closely with Electrical Engineers as well as cross-functional engineering and product teams to review their designs in terms of function and layout placement, • Optimize architecture to reduce HW and SW complexity as well as optimize for cost and power consumption, • Direct ownership of PCBs and sub-systems of a LiDAR from schematic design through layout, fabrication and bringupWhat you have:, • BS, Masters or PH.D. degree in Electrical Engineering or related field, • 6+ years experience in HW design from architecture to implementation, prototyping and bringup all the way to high volume production, • Deep understanding of HW components, their interfaces and SW controls, • Good understanding of high speed designs with a variety of communication protocols (I2C, SPI, UART, Ethernet, PCIE etc), • Demonstrated experience and technical leadership in data acquisition subsystems including high-speed ADCs, high-precision analog sense paths and high-speed serial interfaces, • Demonstrated experience utilizing commercial SI/PI software tools, • Released several complex, multi-layer PCB designs into high volume production, • Be an active team member working closely with other EE engineers and other groups, • Ability to technically lead a small team of HW engineers is a plus, • Experience in motion control systems, design and theory is a plus

Job DescriptionTeam Leader, Bridge Design Team Leader, Bridge Design Rochester, Buffalo, Syracuse, NY Description If you are a team player with a passion to drive your career in Bridge Design, we are the place for you! We are seeking a Team Leader to add to our growing and talented Bridge Design team. As a Team Leader specializing in Bridge design, your role will include managing a team of bridge design staff, managing projects, preparation of proposals, preparing complete project documents for transportation projects; reviewing complete project documents for conformity and quality assurance; and coaching junior staff in the preparation of design calculations, design details, specifications and cost estimates. Responsibilities: • Manages a team of Bridge Design staff, • Manages Bridge Design projects, • Manages the preparation of design calculations and details, • Manages the preparation of contract plans and specifications, • Manages the preparation of construction cost estimates, • Manages the review of construction submittals, • Performs occasional field visits to collect data and evaluate existing conditions, • Performs occasional field visits to resolve construction issues, • Performs oral presentations on technical topics to the public and other engineers, • Participates in business development activities, • Possesses advanced knowledge of applicable engineering principals and techniques, • Effectively expresses thoughts and ideas both verbally and in writing in the English language, • Proficient in the use of applicable computer software, • Performs assigned tasks accurately and efficiently, • Is an active and supportive team member, • Understands basic safety requirements, • Able to lead multiple projects, • Able to manage a team of Bridge Design staff, • Bachelor's or Master's degree in Civil/Structural Engineering, • 10 or more years of progressive experience in the field, • Professional office environment, • Occasional work outside of the office at project sites, • Travels occasionally within NY State and surrounding areas, • Interacts with other team personnel and clients, • Must physically be able to perform field inspection work, e.g., carry/climb ladders, wade in streams, work around traffic, work at heights, etc., • This job requires prolonged periods of sitting at a computer We are a well-established multi-disciplinary architecture and engineering firm that has been serving clients since 1982. With four decades of experience and expertise, we have evolved from a transportation engineering firm to a comprehensive, full-service organization with seven office locations in New York State. Our extensive portfolio of successful projects has earned us a trusted reputation among our clients. If you are seeking a dynamic and rewarding career in the architecture and engineering field, we will offer you exciting opportunities to work on impactful projects, collaborate with talented professionals, and contribute to our continued success. As a certified minority-owned business enterprise (MBE) in New York, we embrace diversity and foster an inclusive work environment. Together, we can shape a future of innovative design, engineering excellence, and client & employee satisfaction. Benefits • 3 weeks Vacation/PTO, • Medical, • Dental, • Vision, • Safe Harbor 401k, • Life Insurance, • HSA Contribution 1K per year, • Cell Phone and Meal/Travel Reimbursement, • Tuition Reimbursement • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 06/25/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionAutomation Engineer Automation Engineer Position Overview We are seeking a skilled Automation Engineer to join our team. The ideal candidate will be responsible for designing, developing, and implementing automated systems to improve production efficiency and quality. This role requires a strong understanding of PLC programming, robotics, and electrical design, particularly in the food, pharmaceutical, and chemical industries. Key Responsibilities • Design and develop automation solutions for production processes, • Program and configure PLCs and HMIs for various applications, • Collaborate with cross-functional teams to ensure seamless integration of automation systems, • Conduct testing and validation of automated systems to ensure compliance with industry standards, • Troubleshoot and resolve issues related to automation systems and equipment, • Create and maintain documentation related to automation projects, including system specifications and user manualsQualifications, • Bachelor's degree in Electrical Engineering, Automation Engineering, or a related field, • Proven experience in PLC programming and automation systems, • Familiarity with robotics and electrical design principles, • Experience in designing control panels and wiring diagrams, • Proficient in CAD software for design purposes, • Knowledge of industry standards and regulations in food, pharmaceutical, and chemical sectors, • Strong problem-solving skills and attention to detail, • Excellent communication and teamwork abilities - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 01/07/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Job summary: We are seeking an experienced Optical Design Engineer to lead the design, analysis, and optimization of optical systems for a variety of applications and advanced technologies. This role involves using industry-standard software (Zemax, Code-V, or equivalent) to model, simulate, and optimize optical designs. You will collaborate with cross-functional teams to integrate optical systems with mechanical, electrical, and software components while ensuring designs meet performance requirements and industry standards. Essential Duties and Responsibilities: • Design, analyze, and optimize optical systems using industry-standard software tools such as Zemax OpticStudio, Code-V, or equivalent., • Lead the design and execution of optical system and component testing, ensuring alignment with performance requirements., • Apply a deep understanding of optical principles, theories, and concepts to solve complex design challenges., • Analyze data sets and create tools for effective data visualization and manipulation., • Take a leadership role in guiding technical staff and making significant contributions to project outcomes., • Collaborate in a small, fast-paced team environment, bringing creativity and technical expertise to each project., • Utilize operating systems like Linux and Windows, and be proficient in MS Office (PowerPoint, Excel) and MATLAB., • Present technical results to internal teams, customers, and at workshops/conferences. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from low, moderate to loud. Education, Skills, and Experience: • Bachelor’s or Master’s degree in Optical Engineering, Physics, or a related field., • 5-10 years of experience in optical design, modeling, and simulation., • Proficiency with optical design software (Zemax, Code V, LightTools, etc.)., • Strong understanding of optical principles, including ray tracing, diffraction, and wave optics., • Experience with optical system testing and validation., • Excellent problem-solving and analytical skills., • Strong communication and teamwork skills., • Ability to work independently and manage multiple projects. Syntec Technologies is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, gender, age, disability, protected veteran status, or any other reason prohibited by law.

Job Description Job Title: QED Optics Manufacturing Engineer Grade: 10 QED Technologies serves the precision optics industry. QED’s customers span the globe and include the world’s leading precision optics manufacturers. Based in Rochester, NY, QED is able to capitalize on the area's academic and industrial resources in the field of precision optics manufacturing and engineering to provide innovative products that set new standards in manufacturing precision optics. Please visit our web site for more information on QED Technologies. Summary Conducts the manufacture of precision optical components for a wide variety of customers by performing the following duties: Quoting • Works closely with customers to gain an understanding of their technical and schedule needs, the details of their application, and any cost / performance trades., • Creates work instructions and monitors their execution by technician staff during optical component fabrication, • Independently executes production work instructions from start to finish, • Drives manufacturing process efficiencies through process parameter optimization, • Designs metrology setups to support full aperture metrology of optical components, including fixturing and tooling that may be required. Develops error budgets to validate optical tests against customer requirements., • Analyzes surface/wavefront data acquired from various metrology setups to optimize process decisions., • Designs fixturing and tooling to support subaperture polishing processes, • Trains others on the proper use and application of metrology and subaperture polishing equipment, • Interacts with other engineering groups (software, systems, optical, mechanical, applications, etc) as needed to support project goals., • Prepares written technical reports and new technical proposals as needed for projects., • Interacts with customers to provide periodic status updates and support technical discussions., • Takes part in authoring technical papers and presenting at conferences. An individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Critical Skills: • Ability and experience with hand tools, measurement devices (calipers, Micrometers, Indicators, Gages etc)., • Understanding of metrology setups and conventional fabrication techniques, • Ability to draft work procedures and coordinate with technicians regarding processes and process improvements Bachelor's degree in Optics, Optical Engineering, Mechanical Engineering or Manufacturing Engineering or related field is preferred; 1 to 2 years of related experience in the aforementioned areas is desired*. (* An equivalent combination of education and experience will be considered.). Computer Skills To perform this job successfully, an individual should have knowledge of the Microsoft Office Suite and Database software. Experience with CAD software to support fixture and tooling design is desired. The manufacturing engineer will be expected to become proficient with QED’s manufacturing and analysis software tools. The candidate should be able to provide a minimum of 2 references. Any technical papers a candidate has authored should also be submitted The position will be based in Rochester, NY. Relocation will not be provided for this position. QED Technologies International is an equal opportunity employer. We value diversity, but due to our ITAR status, we do not provide visa sponsorship. All applicants must be authorized to work in the United States and not require visa sponsorship now of in the future. When not traveling, the Associate Field Service Engineer will be expected to work from the 1040 University Avenue, Rochester, NY location QED offers a generous benefit package which in includes a discretionary bonus.

Job DescriptionDescription: Fisher Associates, P.E., L.S., L.A., D.P.C. has created an internship program to engage college students that are ready to get their foot in the door and gain hands on experience! By using the skills and knowledge gained from academic study and combining with an internship, the student's transition from student to professional is enhanced. Students must be organized, self-motivated, and dependable. We have multiple sectors/service lines in which an internship can be completed as selected by the student. Under direct supervision, the student will perform routine tasks and work on a wide variety of projects gaining a well-rounded learning experience. Who: Students currently enrolled in a Civil Engineering degree program (or related field) What: Obtain hands-on professional work experience with our Transportation, Land Development or Energy groups in various tasks related to design, analysis, and implementation of projects. Where: At any of our office locations! When: Fisher Associates accepts internship applications year-round. Internship timeline is dependent on manager needs and student schedule. The primary function of this role is responsible for, but not limited to, the following: • Exhibit behaviors that align with the Fisher Values: Aspire to Excellence, Teamwork and Respect, Owning our Results and Empowered Employees., • Establish and maintain strong client relationships adhering to the Fisher Clientship philosophy., • Perform engineering analysis and design., • Prepare cohesive and organized engineering calculations., • Assist technical staff with day-to-day design tasks for several types of projects., • Conduct basic engineering functions including design calculations and cost estimating under supervision., • Collaborate as a member of the team to realize project deliverables and deadlines., • Prepare construction specifications under direct supervision., • Assist senior engineers or designers with organizing/preparing reports, studies, or bid packages., • Participate in site visits and field inspections to gather data and assess project conditions, as needed. Fisher Associates, P.E., L.S., L.A., D.P.C. is a consulting engineering and professional services firm serving the Transportation, Land Development and Energy market sectors. Our comprehensive services include landscape architecture, planning, engineering, environmental, survey, GIS and construction representation. Fisher Associates, P.E., L.S., L.A., D.P.C. is headquartered in Rochester NY, with eight offices throughout NY, PA and TX. The culture at Fisher is friendly, respectful, and a true team environment. We own our responsibilities and results, continuously seeking to improve and empower our employees. Requirements: Education & Experience • Currently pursuing a bachelor’s degree in Civil Engineering, Civil Engineering Technology or related field., • Strong academic performance in relevant coursework., • Aspire to excellence, consistently seek to improve, and demonstrate high quality work at all levels., • Team player: collaborate effectively at all levels; treat coworkers, clients and vendors with respect in all interactions; seek to listen effectively, understand others, and build trust., • Own and accept responsibility for results., • Honest, transparent, and trustworthy., • Proactive, self-motivated, and eager to learn., • Strong critical thinking and problem-solving skills., • Ability to consistently demonstrate sound judgement., • Excellent and professional communication skills both written and verbal., • Excellent organizational, project management and time management skills., • Ability to work in a fast-paced environment and manage multiple tasks simultaneously., • Strong attention to detail., • Exhibit flexibility with assignments, workflow, or project changes., • Listen and respond to feedback in a positive manner. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift to 15 pounds at a time., • Must be able to travel to various project sites., • Must be able to access and navigate construction sites and job areas., • Ability to transverse uneven grounds. Salary Range: $23/hour Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Fisher Associates embraces a family-feel culture and welcomes all newcomers with open arms. Fisher Associates does not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job DescriptionDescription: Engineering, Technical Support & Troubleshooting (Primary Focus) • Serve as the primary technical resource for designing, troubleshooting, diagnostics, and root-cause analysis of cryogenic, bulk gas, and on-site generation systems., • Perform advanced diagnostics on mechanical, electrical, and control system issues., • Conduct site evaluations, audits, and system assessments to identify reliability, safety, and efficiency improvements., • Develop technical recommendations, scopes of work, and corrective action plans., • Provide engineering-level support to sales, operations, and service teams for complex issues., • Assist with system design, equipment sizing, and configuration., • Support equipment selection, specification, and standardization., • Work with vendors and OEMs to evaluate equipment and alternatives., • Support commissioning, startups, and escalated service issues., • All jobs, site visits, troubleshooting, and evaluations must be logged in Zoho CRM., • The Technical Systems Engineer provides technical leadership and due diligence for equipment selection, systems changes, and vendor proposals., • Technical recommendations are reviewed with executive leadership prior to procurement to ensure alignment with operational, financial, and strategic objectives., • Approved purchases are executed through the Purchasing Agent under established procurement processes., • This role serves as a key technical advisor in purchasing decisions while maintaining clear separation between technical review and financial authorization., • Provides technical support for sales representatives at prospects and existing customers., • Identify and validate leads, • Perform needs assessments for prospects/customers, • Assist with proposal generation, • Develop, design and communicate technical solutions and offerings, • Interface with prospects/customers for technical issuesRequirements:, • Technical or engineering background with strong troubleshooting experience., • Detailed understanding of National Fire Protection Association(NFPA) 99, NFPA 55, and CGA (Compressed Gas Association) requirements., • Hands on experience with cryogenic equipment, pressure piping, compressors, as well as proven ability to troubleshoot system problems., • Ability to read blueprints and design specifications, manufacturer drawings, architectural drawings related to bulk delivery sites associated with customer installations., • Strong mechanical and electrical diagnostic skills., • Ability to read P&IDs and technical documentation., • Ability to read and interpret documents such as safety rules, material safety data sheets, operating and maintenance instructions, and procedure manuals. Ability to perform mathematical calculations. Basic working knowledge of Microsoft Office applications (Excel, Word, Power Point, Outlook)., • Demonstrates a clear and effective speaking manner for the purpose of explaining information to customers and employees. Ability to set goals and manage time to ensure tasks are completed in a timely manner and achievement of goals are accomplished and manage and execute multiple tasks or priorities as necessary Considerable independent judgment and initiative are required in resolving problems and making recommendations; demonstrating tact and diplomacy in dealing with internal and external customers; and handling proprietary information., • Bachelor’s degree in Engineering or 5+ years’ experience in related field., • Valid driver’s license., • 3-7 years supporting industrial systems., • Ability to work independently and under pressure to meet deadlines., • Must possess self-motivation, enthusiasm, a positive attitude and perform as a team player., • 401(k) matching, • Dental insurance, • Disability insurance, • Employee discount, • Health insurance, • Health savings account, • Life insurance, • On-the-job training, • Opportunities for advancement, • Paid time off

Job DescriptionControls Electrical Engineer Controls Electrical Engineer Position Overview We are seeking a skilled Controls Electrical Engineer to join our team. The ideal candidate will be responsible for designing, developing, and implementing electrical systems and components for various industrial applications, particularly in the food, beverage, pharmaceutical, and chemical sectors. This role requires a strong technical background, creativity in problem-solving, and the ability to work collaboratively in a team environment. Key Responsibilities • Design and develop electrical systems and components using AutoCAD., • Work with PLCs and HMIs to create efficient control systems., • Design control panels for various industrial applications., • Manage and implement industrial control systems and architectures., • Oversee the design and implementation of motor control center hardware., • Bachelor's degree in Electrical Engineering or a related field., • Proven experience in electrical engineering roles, specifically in industrial settings., • Strong proficiency in AutoCAD and electrical design software., • Experience with PLCs, HMIs, and industrial control systems., • Knowledge of control panel design and motor control center hardware., • Familiarity with system architecture and electrical design principles. - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 01/28/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Akkodis is seeking a for an Automation Engineer job with a client in Rochester, NY. Must hold a Bachelor of Science degree In Electrical Engineering to be considered. Will develop control system architecture diagrams. Also provide control system training with operations and maintenance staff at client sites. Salary Range: $100/year to $130/year; The salary may be negotiable based on experience, education, geographic location, and other factors. Automation Engineer job responsibilities include: • Lay out control panels and create electrical schematic designs using AutoCAD., • Specify control system equipment, including electrical panel components and motor control center hardware., • Prepare control system assembly documentation, including bill of materials, wire list, and installation scope of work., • Prepare PLC I/O assignment lists., • Develop process control PLC applications using Allen-Bradley Logix 5, 500, and 5000 software., • Develop HMI (Human Machine Interface) applications with Rockwell FactoryTalk View, AVEVA Wonderware, GE Intellution iFix, or Ignition software., • Provide direct support to clients on new and existing systems., • Develop network designs and specify industrial data center equipment., • Develop custom applications using Microsoft VB.Net and SQL relational database software., • Provide ongoing client support at factory sites or via remote connection., • Commission control systems as part of a startup team at client locations throughout the U.S. Desired Qualifications: * Bachelor of Science degree in electrical engineering is required * Minimum Five years’ related experience * Must have experience within the food, beverage, dairy or pharmaceutical industries. * AutoCAD drawing experience is required. * PLC and HMI programming experience are required. If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at 585-490-8656 or Equal Opportunity Employer/Veterans/Disabled Benefits offerings include but are not limited to: * Medical/ Dental/Vision Insurance * 401k * Holidays and PTO To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit " target="_blank">. The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance Pay Details: $100.00 to $130.00 per year Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Company DescriptionGlobal Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level. Diverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set. Commitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish. Continuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career. Inclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard. Our Evolution and Your Role in It Akkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success. Empowering the Future We're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering. Join the Akkodis Community At Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.Global Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level.\r\n\r\nDiverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set.\r\n\r\nCommitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish.\r\n\r\nContinuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career.\r\n\r\nInclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard.\r\n\r\nOur Evolution and Your Role in It\r\n\r\nAkkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success.\r\n\r\nEmpowering the Future\r\n\r\nWe're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering.\r\n\r\nJoin the Akkodis Community\r\n\r\nAt Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.

Job DescriptionManager, Mechanical Engineer Description If you are a team player with a passion to drive your career in Mechanical Engineering, we are the place for you! We are seeking Mechanical Engineer Manager to add to our growing and talented team. Responsibilities • Lead and perform engineering evaluations and analyses, field inspections, design drawings, technical specifications and cost estimations., • Lead and perform standard mechanical engineering analysis of existing and new building mechanical, plumbing and fire protection systems utilizing the latest codes and technologies to provide optimized designs., • Knowledge of NYS Mechanical, Energy and Plumbing codes, NFPA., • Proficiency in AutoCAD, Revit MEP and Microsoft Office Suite., • Ability to work in a team and communicate effectively both written and verbally., • BS in Mechanical Engineering/Engineering Technology, • NYS PE required, • 10+ years of post-college experience., • Specific areas of expertise include chilled and hot water systems, industrial process related mechanical, building HVAC, controls, plumbing systems and fire protection., • Professional in-office environment, • The job requires prolonged periods of sitting at a computer., • Travel may be required within NY State. We are a well-established multi-disciplinary architecture and engineering firm that has been serving clients since 1982. With four decades of experience and expertise, we have evolved from a transportation engineering firm to a comprehensive, full-service organization with seven office locations in New York State. Our extensive portfolio of successful projects has earned us a trusted reputation among our clients. Benefits • 3 weeks Vacation/PTO, • Medical, • Dental, • Vision, • Safe Harbor 401k, • Life Insurance, • HSA Contribution 1K per year, • Cell Phone and Meal/Travel Reimbursement, • Tuition Reimbursement • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 04/04/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionSr. Controls Engineer Sr. Controls Engineer Position Overview We are seeking a highly skilled Sr. Controls Engineer to join our team. The ideal candidate will play a pivotal role in designing, implementing, and managing electrical controls design for complex industrial processes, ensuring safety and efficiency in operations. This role requires a deep understanding of engineering principles as well as project management experience to lead projects from conception to completion. Key Responsibilities • Electrical design and skid building., • Lead projects in system integration, ensuring compatibility and functionality of various components., • Ensure compliance with C1D1/C1D2 standards in hazardous area designs., • Select and specify instrumentation and field devices for process control applications., • Conduct project management activities, including planning, resource allocation, and timeline management., • Collaborate with cross-functional teams to deliver high-quality engineering solutions., • Strong electrical background is essential, with hands-on experience in creating electrical drawings and skid building., • AutoCAD Electrical, • Strong understanding of system integration and hazardous area design principles., • Experience with instrumentation and field devices, particularly in a plant manufacturing environment. Benefits Bonus opportunities Long term incentive plans • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 10/24/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionDescription: WeTheHobby is a thriving sports entertainment company with global reach, headquartered in Rochester, NY. We value creativity, diversity, innovation, dedication, and our community! Our work environment includes: • Modern office setting, • Strong growth opportunities, • Flexible working hours, • Lively atmosphere, • A team that cares about one another, • Welcoming and inclusive culture WeTheHobby is looking for a skilled and solution-driven Senior Software Engineer to design, develop, and maintain the server-side logic, database architecture, and APIs that support our platforms. You will work closely with front-end developers, product managers, and other stakeholders to create scalable and secure systems that enhance our customer experience. This role is based out of our innovative sports card store in the Neighborhood of the Arts, Rochester, NY. Key Responsibilities: • Take ownership of the design, development, and maintenance of scalable and robust backend services., • Application design, including the authoring of design documents, flow charts, sequence diagrams, and other artifacts that make successful on-time delivery possible., • Create and optimize database schemas, queries, and models for performance and scalability., • Ensure applications are scalable, secure, and maintain high uptime for our growing user base., • Collaborate with cross-functional teams to gather requirements and translate them into technical solutions, ensuring alignment with business objectives., • Ensure the scalability, performance, and reliability of the applications you build., • Leading service/software implementation by contributing to the codebase, acting as an example of how to write testable, maintainable code which can adapt to the changing needs of our users., • Work on payment gateways, live streaming tools, and other third-party integrations to enhance platform functionality., • Maintain comprehensive technical documentation for internal and external use., • Work closely with front-end developers, designers, and stakeholders to integrate user-facing elements with server-side logic, • Participate in planning and strategy meetings to align technical solutions with business goals., • Ensuring the quality of the application development remains high through the application of best practices like automated testing, peer code reviews, and automated CI/CD pipelines., • Stay updated with the latest industry trends and technologies to bring innovative solutions to the team., • 5+ years of professional experience in backend development, • At least 2 of those years have been focused on designing, building, deploying, and maintaining DOTNET Applications, • 5+ years leading design or architecture (design patterns, reliability and scaling) of new and existing systems experience, • Strong knowledge of database design, modeling, and optimization (both SQL and NoSQL), • Hands-on experience with AWS services Technical Skills: • Strong understanding of GraphQL, Rest, sockets, SignalR pub/sub and buses preferred., • Experience with enterprise software development platforms, Dotnet., • Knowledge of modern software development practices and tools (CI/CD, Git, Docker, etc.)., • Familiarity with modern frameworks, Express.js, Dotnet., • Knowledge of microservices architecture and best practices, event-driven architecture a plus, • Understanding of security best practices in software development, • Experience with eCommerce platforms or systems (e.g., BigCommerce, Square), • Familiarity with front-end frameworks (e.g., React.js) for better collaboration Soft Skills: • Excellent problem-solving skills and attention to detail, • Proven ability to work effectively in small teams with excellent communication skills., • Strong multitasking skills, capable of handling multiple projects simultaneously., • Eagerness to learn and adapt to new technologies and challenges, • Ability to work in a fast-paced environment and adapt to changing requirements. Education: • Bachelor's or Master’s degree in Computer Science, Engineering, or a related field. In accordance with applicable Federal and State laws, the anticipated salary range for this position based upon location in Rochester, NY and experience is $98,000 - $132,000 To comply with Federal law, WeTheHobby participates in E-Verify. All newly-hired employees are verified through this electronic system established by the Department of Homeland Security (DHS) and the Social Security Administration (SSA) to confirm their identity and employment eligibility.

Job Description Akkodis is seeking a for a Senior Software Engineer, Embedded Middleware job with a client in Rochester, NY. Must hold a Bachelor's degree in Computer Science, Information Systems, or related discipline to be considered. This position is responsible for developing software and supporting software development processes and tools. This includes, but is not limited to, requirements development, design, build, implementation, and testing. This role focuses on designing and implementing robust inter-process and inter-node communication for distributed embedded Linux systems. Emphasis will be placed on real-time messaging, safety, and scalability to support time-sensitive workflows across multiple software components and hardware nodes. Salary Range: $110/year to $140/year; The salary may be negotiable based on experience, education, geographic location, and other factors. Senior Software Engineer, Embedded Middleware job responsibilities include: · Design and implement modular middleware components that enable real-time communication between distributed subsystems using DDS, ROS2, or other inter-process communication (IPC) mechanisms. · Act as Software SME in design discussions with Product Managers and Systems Engineers to define requirements. · Help define system architecture, configurations, and development processes to ensure long-term maintainability and traceability within a regulated quality management system. · Design and implement service abstraction layers to decouple application logic from hardware and OS dependencies. · Determines technical / operational feasibility by conducting system analysis, developing POCs, etc. · Contribute to system-wide synchronization, logging, and monitoring infrastructure to support observability of system performance, resource utilization, and health. · Enforce good software design practices throughout requirement gathering, architecture definition, unit testing, and code reviews. · Develop integration test frameworks to ensure robustness in multi-process embedded environments. · Perform other work-related duties as assigned. Desired Qualifications: * Bachelor's degree in Computer Science, Information Systems, or related discipline is required * Minimum 5 years’ related experience * Proficiency in Modern C++ (C++11 minimum, C++17 or newer preferred) with a strong focus on memory-safe design techniques. * Experience with IPC messaging middleware such as DDS, protobuf, ZeroMQ, etc. * Familiarity with Agile development practices and toolchains, including Git, CI/CD integration, and issue tracking platforms such as Jira, GitHub, or Azure DevOps. * Experience developing and testing embedded system software for real time applications/robotic systems. * Strong analytical and debugging skills with a systematic approach to solving complex technical issues. * Experience with automated testing frameworks such as GTest, PyTest, or similar, including test mocking, emulation, and simulation tools for embedded Linux systems. If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at 585-490-8656 or Equal Opportunity Employer/Veterans/Disabled Benefits offerings include but are not limited to: * Medical/ Dental/Vision Insurance * 401k * Holidays and PTO To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit " target="_blank">. The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance Pay Details: $110,000.00 to $140,000.00 per year Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Company DescriptionGlobal Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level. Diverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set. Commitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish. Continuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career. Inclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard. Our Evolution and Your Role in It Akkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success. Empowering the Future We're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering. Join the Akkodis Community At Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.Global Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level.\r\n\r\nDiverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set.\r\n\r\nCommitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish.\r\n\r\nContinuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career.\r\n\r\nInclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard.\r\n\r\nOur Evolution and Your Role in It\r\n\r\nAkkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success.\r\n\r\nEmpowering the Future\r\n\r\nWe're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering.\r\n\r\nJoin the Akkodis Community\r\n\r\nAt Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Independently performs, tests, inspects and records technical work of the highest degree of complexity. Plans and coordinates field construction observation activities and reviews the work of and provides mentoring of other inspectors. Serves as a liaison between the Project Owner, Contractor, and Professional Engineer having project oversight., • Reviews materials against specifications, prepares change orders, prepares and reviews contractor payment applications, and ensures that project records are being prepared in accordance with accepted standards., • A Resident Engineer must be able to fully express thoughts in writing and compile summary reports of other inspectors. Must have the ability to perform with the highest degree of independence, and effectiveness, in the field or in the office, within parameters established through the project plans and specifications. Must be fluent in the use of computers as a tool to aid construction observation., • A Resident Engineer must be an effective communicator with good written communications skills. This position is often required to communicate the requirements of the project plans and specifications to the Contractor and negotiate impacts to the project from changed conditions., • The Resident Engineer must also be familiar with corporate policies and safety requirements., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Desired 10 years of related experience required, or similar position with experience in the construction field and transportation projects., • NICET Level IV certification or a Professional Engineer's (PE) license is required. Estimated Compensation Range: $89,440 - 108,160/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Engineering Program Manager Department: Product Design Services FLSA Status: Exempt Reports to: Operations Manager, Product Design Services Pay Range: $101,100 - $146,700 annually Location: Rochester, NY The Role: D3 Embedded is seeking a skilled and experienced Engineering Program Manager to act in the role of Chief Engineer where they will lead a team of Engineers to design and develop and cutting-edge embedded systems. The systems are end-to-end solutions containing; sensors, cameras, mmWave Radar, connectivity, embedded processing and Artificial Intelligence (AI) for performance critical applications. The ideal candidate has experience with Embedded Realtime Operating Systems (RTOS) like Embedded Linux, digital imaging, electronics design, software architecture and development, computer vision and machine learning. This position requires strong problem-solving skills, the ability to mentor and guide engineering teams. The Responsibilities: • Lead a project team to develop and an embedded system and realize the solution using company core process, • Collaborate with key stakeholders to define program scope, timing, and deliverables and use them to execute the program and track progress, • Coordinate multi-disciplinary project team leads, • Manage project to milestones (Schedule and Outcomes), • Manage resources including; teams, budgets, and schedules, to maximize customer satisfaction, and project profitability, • Identify, assess, and mitigate risks that may affect program delivery, • Act as the technical decision maker driving complex technical decisions across multiple teams (Facilitates the discussion to define “done”), • Provide primary technical communication with project team and project stakeholders, • Maintain effective communication channels to keep stakeholders updated on project progress and changes, • Facilitate technical and stakeholder meetings, • Responsible for making sure the right people are on each task and the tasks are understood by the team, • Collaborate with management and technical teams on product strategies, • Prep and lead gate/design reviews and provide technical oversight, • Develop and finalize requirements, • Develop electrical and mechanical block diagrams, and high-level software architectures to meet requirements and guide design trade-off decisions, • Provide estimations for next phases of a current project using change requests, • Maintain project documentation, including plans, schedules, budgets, and status reports., • Requestor for Materials purchases and shipments for projects, • Approver for Design Releases (Arena ECOs), • Own the full life cycle of new products/solutions from proof of concept to integration with other components and teams, • Lead and/or participate in all phases of the product development cycle including:, • requirements definition and architecture, • software design and development, • implementing software, • software/hardware integration, • verification and validation, and customer support, • Develop & identify tools / methods for better design reuse & process improvement Other duties as assigned The Right Person Will Have (Required): • 3+ years of experience working as a Technical Lead, Technical Project Manager, or Program Manager for both hardware/software projects., • Bachelor of Science Degree in Software Engineering, Electrical Engineering, Computer Science, Computer Engineering or a related field., • 5+ years of industry experience, • Experience with System Requirements Documentation, Requirements Allocation, Requirements Traceability, and Test Case development and execution. Experience with product and component-level FMEAs., • Self-driven personality, • Capable of a big picture, system-oriented approach, • Solid technical leadership skills, • Strong communication and interpersonal skills The Right Person Will Have (Preferred): • Master of Science or PhD in Computer Vision, Machine/Deep Learning, Computer Science, Computer/Electrical/Software Engineering, or a related field., • Experience with autonomous/industrial robotic platforms and applications, • Experience with embedded and edge processing platforms (Nvidia Jetson devices, Qualcomm Snapdragon devices, and Texas Instrument Jacinto devices in particular), • Experience with edge AI (accelerators, integration, model conversions, deployment, profiling, etc.), • Knowledge of intrinsic and extrinsic calibration procedures for multi-modal sensor systems, • Experience with sensor fusion techniques (calibration, early, mid, late fusion, etc.), • Knowledge of camera optics and computational geometry, • Gstreamer experience, • Robot Operating System (ROS) experience, • Experience with version control systems such as GIT and DVC, • Experience with GPU programming frameworks such as OpenCL and CUDA, • Experience with Embedded Real-Time Operating Systems (RTOS) and Embedded Linux The Benefits: • Competitive total compensation, • Medical and dental coverage, • Employer paid basic life, short-term disability, and identity theft coverage, • Voluntary vision, life, long-term disability, accident, critical illness coverage, • 401k retirement contribution, • Paid holidays, time-off, and sick time, • Tuition assistance and employer paid professional development, • Flexible work schedules, • Remote opportunities available, • Complimentary snacks and beverages Since our founding in 1999, D3 Embedded has driven innovation in high-performance embedded systems development. We leverage our expertise in autonomous machines, sensors, imaging, optics, edge computing, algorithms, robotics, and electrification to provide cutting-edge engineering design and low-volume manufacturing services. Headquartered in Rochester NY, we serve a global network of customers and are proudly connected with many technology leaders and Fortune 500 companies. We are interested in bright, creative, and team-oriented individuals exhilarated by the opportunity to transform the world through frontier technologies. Candidates must be eligible to work in the United States. D3 Embedded does not sponsor visas. For more information about D3 Embedded, please visit . D3 Embedded is committed to fostering a diverse work environment and proud to be an Equal Opportunity Employer. We consider and hire applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, or membership in any other group protected by federal, state or local law. D3 Embedded participates in E-Verify, a federal program that confirms employment eligibility upon hire. Powered by JazzHR eptdMFVp5b

If you are a team player with a passion to drive your career in Mechanical Engineering, we are the place for you! We are seeking Mechanical Engineer Manager to add to our growing and talented team. Lead and perform engineering evaluations and analyses, field inspections, design drawings, technical s

CONSIDERED EXPERIENCE INCLUDES: Field Service Technician Mechanic Automated Candy & Protein Bar Food Packaging Lines Maintenance Repair Installation Machinery Flow Wrappers Pouchers PLCs HMIs Servos Motion Controls Hydraulics Pneumatics #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs

If you are a team player with a passion to drive your career in Mechanical Engineering, we are the place for you! We are seeking Mechanical Engineer Manager to add to our growing and talented team. Lead and perform engineering evaluations and analyses, field inspections, design drawings, technical s

Field Service Engineer - Automated Packaging Machinery - Tonawanda, NY Field Service Technician Engineer Mechanic Tech Maintenance Install Repair Calibrate Maintain Processing & Packaging Equipment Machinery Automated Film Foil Pouchers Baggers Fillers Roasters Dry Friers Vacuum Fried Baked Snacks P

Bachelors degree in Electrical Engineering, Electrical & Computer Engineering, or equivalent technical field. This position is in the Electrical Engineering team working alongside a team with PCB design and firmware expertise.

Req’d: Bachelor’s degree in Chemical Engineering, Chemistry, Physics, or related field and 4 years’ related experience. Application Development Engineer in East Syracuse, NY to work with semiconductor and display customers developing applications using INFICON sensors.

Bachelors degree in Electrical Engineering, Electrical & Computer Engineering, or equivalent technical field. This position is in the Electrical Engineering team working alongside a team with PCB design and firmware expertise.

Trains other Field Service Engineers on specific product lines. Trains other Field Service Engineers on specific product lines and company software (timecards, expense reporting, drawings, parts). This position requires an associate degree or bachelors degree in a related engineering field plus two

Bachelors degree in Electrical Engineering, Electrical & Computer Engineering, or equivalent technical field. This position is in the Electrical Engineering team working alongside a team with PCB design and firmware expertise.

Field Service Engineer II Onsite. This position entails the installation, service, troubleshooting and repair of complex electronic and electromechanical equipment, site service, field process applications. Trains other Field Service Engineers on specific product lines.

Bachelors degree in Electrical Engineering, Electrical & Computer Engineering, or equivalent technical field. This position is in the Electrical Engineering team working alongside a team with PCB design and firmware expertise.

Trains other Field Service Engineers on specific product lines. Trains other Field Service Engineers on specific product lines and company software (timecards, expense reporting, drawings, parts). This position requires an associate degree or bachelors degree in a related engineering field plus two

Bachelors degree in Electrical Engineering, Electrical & Computer Engineering, or equivalent technical field. This position is in the Electrical Engineering team working alongside a team with PCB design and firmware expertise.

Leverage our career self-progression plan to move from Field Technician I to Field Technician IV, with 10% increases for each progression level and bonus payments for completing course work. What our Field Technicians Enjoy Most About the Role. No two days are the same in the field.

Bachelors degree in Electrical Engineering, Electrical & Computer Engineering, or equivalent technical field. This position is in the Electrical Engineering team working alongside a team with PCB design and firmware expertise.

Starting Pay: Up to $32/hr depending on experience.A Maintenance & Repair Technician.Troubleshoot and repair conveyor components, including motors, gears, switches, and other electrical or mechanical parts.A high school diploma or equivalent is required.Proven experience in conveyor maintenance

Bachelors degree in Electrical Engineering, Electrical & Computer Engineering, or equivalent technical field. This position is in the Electrical Engineering team working alongside a team with PCB design and firmware expertise.

Manufacturing Engineers for aprecision manufacturing company in the Rochester, NY area that produces high-precision machined components for quality-critical industries including aerospace, aircraft, medical, and advanced manufacturing. The company operates out of a modern, climate-controlled, state-

JRS Pharma offers an exciting Lead Maintenance Technician opportunity at our corporate office in the U.If you have an eye for detail, professional style and a passion for fixing things, we want you on our team.JRS Pharma is a leading manufacturer of excipients, offering a complete portfolio of solut

If you have experience in this field, we want you to bring your skills to our fast-paced and welcoming environment!.

Build your Career with an Industry Leader.As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences.Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and su

We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses.

Associate's degree in electrical engineering or related field preferred. Ability to read and interpret complex electrical schematics and engineering drawings. Ability to lead junior technicians in the field.

NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.

Mark IV powers Rochester’s growth with thousands of homes, apartments, senior communities, and over a million square feet of commercial space.As a family-owned business for nearly 60 years, we know our success depends on skilled professionals like you.As a Residential Maintenance Technician, you��

If you have experience in this field, we want you to bring your skills to our fast-paced and welcoming environment!. Live Better U is a Walmart-paid education benefit program for full-time and part-time field associates at Walmart and Sam's Club.

Purified Water Technicians are responsible to maintain all of the facility purified water systems in good working condition.Including adding and adjusting chemical levels, making online adjustments, verifying that the system in general is producing water within current USP specifications & recording

Associate's degree in HVAC, mechanical, plumbing, refrigeration or related field. HVAC field in a commercial, industrial, or institutional setting or working for a contractor in an comparable setting. RIT's Facilities Management Services department is looking for a dynamic HVAC/R Repair & Preventati

A family-owned business since 1924, A.Duie Pyle provides a range of integrated transportation and distribution solutions throughout the Northeast.Supported by our vast network of Less-Than-Truckload (LTL) service centers, warehouse facilities, and dedicated locations, we have the ability to offer fl

Associates or Bachelor's degree in Electronics, Engineering, or other related technical or biological field. Prior Field Service Engineer experience. Salary or hourly rate ranges have been implemented to reward associates fairly and competitively, as well as to support recognition of associates’

Join Our Team as a Field Service Technician at DOC Services!. Your Role as a Field Service Technician.

Troubleshoot and correct problem installations or applications in the field. This position requires a strong mechanical background to provide technical service and support for low-tension polymer belting technology in conveyor applications. Support and promote low-tension polymer conveyor belt appli

Field Service Technician-Fueling Systems for plumbing, or electrical industries. Basic computer skills; knowledge in networking and familiar with mobile tools and applications. We are currently seeking Field Service Technicians in the Rochester, NY area.