Forklift mechanic jobs in Houston, TexasCreate job alerts

Job Description Job Description: Industrial Maintenance Mechanic The Industrial Maintenance Mechanic is responsible for providing the day-to-day preventive maintenance, troubleshooting and repair, and fabrication necessary to maintain facility manufacturing machinery including cranes, grinders, furnaces and ovens, lathes, fans, tools, and material movement equipment, etc. As an Industrial Maintenance Mechanic, you must have the ability to read and understand mechanical and electrical diagrams and schematics, and technical repair manuals. Must also be required to adhere to local, state, and federal law, company ISO, Quality programs and procedures, company policies, and Health, Safety, and Environmental regulations and requirements. • Follow the direction of the Lead Mechanic and Maintenance Manager, • Responsible for keeping equipment and work areas clean and orderly, • Responsible for the maintenance and repair of all processing\manufacturing equipment: compressors, cranes, grinders, furnaces and ovens, lathes, fans, electric motors, electric tools, hydraulic systems, and facilities maintenance, • Ability to effectively communicate with other employees in the facility, both verbally and in writing, • Read and understand mechanical and electrical prints, schematics, diagrams, and technical repair manuals, • Performing unexpected repairs, • Performing assigned duties with little or no supervision or instruction, • Apply knowledge of occupational hazards and necessary safety precautions applicable to maintenance work, • Operating personnel lifts and material handling tools, • Rigging, lifting, and relocating a variety of complex, heavy machines, equipment, and components, • Knowledge of machines and tools used, including torch\welding equipment, minor electrical work, hydraulics, pneumatics, and hand tools, • Ensures manufacturing processes are capable of producing in the shortest time possible, • Willing to share ideas, techniques, and procedures with coworkers, • Ability to troubleshoot mechanical breakdowns and repair as necessary, • Ability to make steel fabrications via measuring, cutting, bending, and welding, • Knowledge in the general repair of processing\manufacturing equipment, • Maintains a safe and productive work environment, • Follow all safety policies and procedures, • High School Diploma/GED required, • 3 years of industrial maintenance experience required, • Basic hand tools and sockets up to 3/8” drive is required, • Basic knowledge of mechanical, pneumatic, and hydraulic systems is required, • Be adaptable to a changing work environment, frequent change, delays, and unexpected events, • Willing to work flexible shifts and overtime is a must, • Ability to read and understand maintenance manuals, drawings, and schematics, • Forklift experience or the ability to be trained is a plus Salary: $18.00 - $26.00 per hour Schedule: • 8 hour shift, • Monday to Friday COVID-19 considerations: All applicants are required to wear a mask for a face to face interview. Ability to commute/relocate: • Houston, TX 77041: Reliably commute or planning to relocate before starting work (Required) Company DescriptionCoiling Technologies, Inc. was founded in 1976 as a fast turnaround, short run spring company. However, through the years Coiling Technologies has evolved to meet a variety of industry specific needs. CTI is ISO certified and continually audited, we strive to improve the quality and service our customers should expect from a spring supplier. Our products are analyzed both prior to production, and during, to ensure that we are meeting or exceeding your specifications.Coiling Technologies, Inc. was founded in 1976 as a fast turnaround, short run spring company. However, through the years Coiling Technologies has evolved to meet a variety of industry specific needs. CTI is ISO certified and continually audited, we strive to improve the quality and service our customers should expect from a spring supplier. Our products are analyzed both prior to production, and during, to ensure that we are meeting or exceeding your specifications.

Location(s): Houston, TX, US, 77029 Function: Manufacturing Audience: Hourly Work Arrangement: On Site Requisition ID: 67152 Maintenance Mechanic 2nd Class Job Description Job Title: Maintenance Mechanic 2nd - Class Department: Maintenance Reports to: Maintenance Leader Pay: $35.34 Supervises: N/A FLSA Status: Non-Exempt Date: 9/18/23 SUMMARY The purpose of the 2nd class mechanic is to perform as professional, highly skilled and exceptionally competent maintenance person. Participates in teams to develop and implement solutions. JOB DUTIES AND RESPONSIBILITIES PRINCIPAL DUTIES AND RESPONSIBILITIES: Plant and Environmental Safety • ___Lives the Owens Corning Safety Stand and meets all safety requirements. Safety is a condition of employment., • Take personal ownership to work safely and hold other team members to the same high standards of safety, • Notify supervisor immediately of any accident, near miss or on- the -job injury when it occurs no matter how insignificant it may seem., • Participates in the safety, quality, autonomous maintenance, TPM and housekeeping programs as established within the plant; including but not limited to Focused Improvement Events, Safety Committee, Training, etc., • Performs job tasks to reduce environmental impact and adheres to the environmental regulations and recycling procedures for waste disposal., • Complies with all plant rules and safety regulations., • Performs cleanup duties at workstations and/or equipment/machinery., • Communicates safety concerns and/or equipment problems/abnormalities to appropriate personnel, maintaining strong communication with the appropriate line section operators to ensure immediate action is taken for product out of spec., • Inspect vehicles before use and throughout shift, keeping all equipment clean and operational. TPM • Participates in plant TPM initiatives - completing activities associated with TPM tasks (adheres to CILT standard, 5S)., • Continues to use TPM methodology to gain a better understanding of the equipment., • Identifies and participates proactively in learning opportunities and develops expertise in those areas., • Utilizes Focus Improvement tools to problem solve., • Works to achieve zero injuries, zero defects and zero losses., • During PM days, uses time effectively to bring equipment to optimal condition for zero losses., • Maintain DM and Step Boards. Maintenance • Energy Control Procedures (ECP's) and Lock Tag Try (LTT) system. Respect for the potential hazards within the manufacturing operation. Training and regular auditing of the process., • Fluent in the language of the plant., • Computer literacy - email, simple spreadsheet, word doc., • Safe rigging procedures., • Forklift operation, licensed - will provide certification., • PLC intermediate -- Ability to use laptop for troubleshooting and see what limit switch or photo eye isn't working and ability to adjust where needed. Internal various timers in the program; the ability to access status files to diagnose and clear PLC faults., • Intermediate troubleshooting, how to analyze a problem and step to the root cause. Help reduce cycle time to problem resolution and eliminates the "replace and see what happens method" with little to no direction., • Understand what it takes to consistently manufacture our products. Critical product characteristics, key process variables, customer needs etc., • Business 101 - World Class Manufacturing (WCM) concepts, what are they, individual and business benefits. Key business metrics and focus., • Installs, modifies or maintains plant equipment and assists in determining appropriate methods to accomplish these tasks., • Must work safely and follow all documented and "common sense" safety policies and procedures., • Read, understand, and analyze blueprints and other technical data references., • Expert use of hand and power tools., • Inspects plant equipment to identify potential problems prior to breakdown occurrences., • Complies with good housekeeping practices on the job and insures work areas are clean and picked up after each job completion., • Follows all environmental compliance polices & programs., • Work as instructed with outside contractors. Mechanical • Basic understanding of machining bores, keyways, drill press, grinding; lathe and mill operation., • Ability to properly precision align belt, gear or direct coupled shafts using proper tools to specified tolerances., • Understanding of lubrication principles and bearing tolerances and bearing physics-I.E. how does it work in terms of need for extreme care, keeping clean, etc., • Hydraulic systems understanding - hydraulic flow principles. Effects of pipe sizes and valves on pressure drops, making proper fittings per system requirements, proper valve application, etc. Applied to water systems, hot oil, and hydraulic systems., • Same as above for compressed air and steam, (where applicable) systems., • Understanding of pump and operating characteristics including effects of suction pressures, head pressures, sealing/packing techniques., • Ability to track conveyor belts properly and understanding the physics of belt operation and tracking including bucket elevators; belt splicing., • Ability to read air and power fluid schematics., • Welding for all; structural and piping welding for at least one craft per plant., • Pipefitting - alignment, flange, threading., • Electrical component "how they work" understanding: solenoids, motors, heaters, contacts, and photoeyes., • Ultrasonic rotating equipment troubleshooting. Electrical • Industrial electrical code., • Capability to read schematics and P&ID drawings., • Fusing, thermal overload protection, wire sizing, motor theory, etc., • AC/DC and Servo drive system., • Be able to safely conduct motor control and power circuit troubleshooting. Understand fuse sizing, take motor amp readings, understand basic DC motor control, etc., • Ability to fully troubleshoot AC/DC variable frequency drives, and communicate technically with outside technical support when needed., • Ability to fully understand the various control loops in the plant including IM/APC systems and weight control equipment., • Competent in electrical noise avoidance-grounding, shielding, etc., • Burner system understanding, troubleshooting and properly tuning Other • ___Demonstrate the ability to effectively communicate., • Support the training and development of colleagues., • Demonstrates flexibility to changing priorities as business needs dictate., • Identifies and participates proactively in learning opportunities, and develops expertise in those areas., • Follows standard operating procedures and processes., • Can and is willing to make decisions. Knows the chain of command to get support., • Regular attendance on site and the ability to rotate varying shifts., • All other duties as assigned or needed. ___JOB REQUIREMENTS SKILLS AND ABILITIES The employee should hold the following skills and abilities: • ___Demonstrated desire to impact safety, • Must be able to work independently or in a team atmosphere with minimal direct supervision, • Demonstrated mechanical aptitude and the ability to troubleshoot, • High attention to detail, • Demonstrated ability to multi-task, • Basic mathematics skills, • Able to effectively communicate (read, write, speak, understand) English, • Electrical, • PLC, • Hydraulic, • Pneumatics, • Blueprint & Schematic reading, • Proficient in SAP PM Module ___COMPUTER AND SOFTWARE COMPENTENCIES The employee must be able to: • Work with a computer to perform basic data entry, • Demonstrate basic computer skills such as ___Microsoft Outlook, IVC and SAP. EDUCATION AND/OR EXPERIENCE • High School Diploma or GED Equivalent required., • Manufacturing or process related experience preferred., • Preferably five (5) years in a related maintenance trade or occupation that involved electrical, hydraulic machinery and equipment in a manufacturing environment., • Able to demonstrate trouble-shooting techniques and have a basic understanding of blueprints., • Basic ability and knowledge of welding practices and hydraulic circuitry., • Advanced understanding of electrical circuitry., • Basic PLC knowledge., • Must have the ability to interpret instructions furnished in written, oral, diagram or schedule form., • Flair for working with large industrial machines., • Must be able to work independently or in a team atmosphere with minimal direct supervision with drive toward accomplishment, and to produce high quality work. ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT • ___Must remain drug free, • Exposure to dust/dirt/fumes/fiberglass, • Ability to work in wet environments: including head and feet, • Industrial manufacturing environment with extreme temperature variation, • Exposure to sounds or noise levels that maybe uncomfortable (hearing protection is provided), • Ability to wear applicable PPE for up to 12 hours, • Ability to distinguish colors and shading, • Ability to become certified to operate a forklift, • Prolonged sitting, standing, or walking for 8 - 12 hour shifts, • Bending and twisting; repetitive movements, • Able to do repetitive hand, arm, leg movements for up to 12 hours, • Must be able to squat, bend at the waist and knees freely, • Be able to climb up to three floors or stairs, use full upper body movement for process; stand up to 12 hours with breaks, • Ability to work from heights, • Lift, push and pull 40lbs.repetitively, • ___Handle, control, feed, or feel objects, tools or product, • Must be able to work flexible rotating shift schedules - mandatory overtime as required This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, and abilities. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship. Nearest Major Market: Houston

Based in St. Louis, Core & Main is a leader in advancing reliable infrastructure with local service, nationwide. As a specialty distributor with a focus on water, wastewater, storm drainage and fire protection products and related services, Core & Main provides solutions to municipalities, private water companies and professional contractors across municipal, non-residential and residential end markets, nationwide. With over 370 locations across the U.S., the company provides its customers local expertise backed by a national supply chain. Core & Main's 5,700 associates are committed to helping their communities thrive with safe and reliable infrastructure. Visit ___ to learn more. Job Summary Ensures the company's facility needs are met by providing services and maintenance to ensure the safe and efficient operations of all equipment utilized for maintenance activities, determining the actual needs for material and equipment, and maintaining and improving current facilities cost effectively. Responsible for the inspection, maintenance and repair of power mechanical equipment and company vehicles. Major Tasks, Responsibilities and Key Accountabilities * Prepares accurate records on maintenance, repairs and fuel levels of equipment. * Maintains all decals, safety warnings and company ID stickers. * Completes work orders for internal and external repairs. * Lead, Teach, and Work with a team of mechanics to ensure all rental equipment is properly maintained as well as fabrication equipment * Repairs power and mechanical equipment, including a variety of butt fusion machines. * Under takes complex repair and maintenance projects. * Reports safety violations to supervisor. * Maintain shop cleanliness. * Participate in team meetings * Communicate and record any repairs and maintenance needed for equipment with mechanic team as well as with supervision * Keep all rental files as well as repair orders filed correctly and accurately * Reports safety violations to supervisor. Requirements * Forklift operating experience Preferred Qualifications * Fluent in English (written and verbal) * HDPE butt fusion equipment operating or maintenance and repair experience - McElroy, RITMO, and Technodue * 1 year of experience in hydraulics * 1 year of electrical experience * 1 year of schematic reading experience or * 1 year of experience of diesel engine repair experience * Strong computer skills Career Level Dimensions Typical Training/Experience * Technical certification or associate degree may be required in some areas. * Generally 7+ years of experience in a related area of responsibility. Problem Complexity * May modify processes to resolve situations. Autonomy * Under limited supervision, relies on experience and exercises independent judgment to determine the best approach to achieve desired outcomes. * Course of action is often determined by interpreting procedures and policies. Leadership * Is sought out and/or assigned to provide general guidance/direction, training, and technical assistance to junior level support personnel. * Contributes to employees' professional development but does not have hiring/firing authority. Environmental Job Requirements * Typically in a comfortable environment but with regular exposure to factors such as temperature extremes, moving machinery, loud noises, and fumes, which may cause noticeable discomfort or a moderate risk of accident or illness. * Must be willing to travel to the field to perform maintenance or repairs 10-20% of the time * Requires intermittent periods during which continuous physical exertion is required, such as walking, standing, stooping, climbing, lifting, and maneuvering material or equipment, some of which may be heavy (50+ pounds) or awkward. Core & Main is an Equal Employment Opportunity employer. Employment at Core & Main is based solely on a person's merit and qualifications directly related to professional competence. Core & Main does not discriminate against any employee or applicant on the basis of race, creed, color, religion, national origin, nationality, ancestry, age, disability, veteran status, pregnancy or related condition (including breastfeeding), affectional or sexual orientation, gender identity or expression, marital status, status with regard to public assistance, citizenship, or any other basis protected by law. None of the questions in this application are intended to elicit information regarding any protected characteristics, nor imply any limitation, illegal preferences or discrimination based upon non-job-related information or protected characteristics. For more information, please ___ or visit

Job DescriptionDiesel Mechanic Job Description • Competitive pay $20.00 - $22.00 an hour DOE, • Temp to hire., • The position is in South Houston, • Monday-Friday 7:00 am-5:00 pm (Some Saturdays)Our client, one of the largest line pipe distributors in the United States is looking for a reliable Diesel Mechanic. Your New Role: As a Diesel Mechanic, repair and maintenance of forklift, heavy equipment, and trucks in accordance with factory and industry standards, run diagnostics where applicable, and work closely with other team members to meet company goals. What You Will Do:, • Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications., • Repair and replace damaged or worn parts., • Operate and inspect machines or heavy equipment to diagnose defects., • Diagnose faults or malfunctions to determine required repairs., • Dismantle and reassemble heavy equipment using hoists and hand tools., • Clean, lubricate, and perform other routine maintenance work on equipment and vehicles. What You Need:, • High School Diploma or GED, • 1 – 3 years of pipe yard and forklift experience, • Knowledge of Diesel Engine and Hydraulic Systems diagnostics and preventive maintenance., • Must be willing to work overtime as needed., • Regularly lift and/or move objects up to 50 lbs., • Must be able to pass pre-employment screenings. Your New Organization: Enjoy competitive compensation, health, vision, and dental insurance plans, and a 401(K) plan. Get paid weekly through direct deposit for every hour you work. When you partner with The Reserves Network, you get to work with experienced recruiters who will advise you on all aspects of your job search and career aspirations. Ready to take control of the way you work? Complete our application today and join The Reserves Network team, where your skills and contributions will be valued and rewarded. For additional information, call 281-724-4930. Your Career Partner: Veteran-founded and family-owned, The Reserves Network specializes in connecting exceptional talent with rewarding opportunities. With our extensive industry experience, we are dedicated to helping you achieve your professional goals and shine in your field. Please submit your application for consideration in this and other positions and gain exclusive access to our mobile app for job notifications.As an equal-opportunity employer, we value our employees and foster an environment of respect, integrity, and trust in every aspect of employment. However, you identify and whatever your background, we encourage you to apply today.

Job Description Combilift Depot is seeking a Mechanic to repair and maintain Combilift forklifts in the Houston area. Your position will require repairing existing customers used and new forklifts. We are looking for a long-term employee to join our team as we expand throughout Texas & Louisiana. Job Duties: • Repairing forklifts., • Diagnose issues with forklifts., • Keeping your work area clean., • Help identify parts that are needed for repairs., • Fill out legible paperwork., • Demonstrate safe operation of job duties., • Be a team player and work with other employees., • Other duties as assigned. Job Requirements: • Must take basic knowledge test to confirm above experience., • Basic Mechanic & Testing Tools, • Current driver's license., • Reliable transportation to get to work., • Professional Appearance., • Read/Write., • Positive attitude & team player., • Able to lift 50 lbs., • Able to work Monday thru Friday – must be reliable and show up to work every day., • Able to communicate directly with others around you., • High School Diploma, GED, or 12 months recent verifiable experience., • Must be able to pass drug test, driving record check, & background check. Job Benefits: • Competitive Hourly Pay, • 5 day work week, • Company Vehicle, • Company Cell Phone & Computer, • Uniforms, • Ongoing education on Combilift products, • Advancement Opportunities, • Paid Holidays, • Paid Vacation, • 100% Paid Employee Health Insurance, • Life Insurance, • Vision & Dental Insurance Options, • 401K with Company MatchCompany DescriptionCombilift Depot was established in 2007 as a family owned and operated forklift dealership specializing in selling, renting, and servicing niche forklifts and attachments to end users. The company has grown to be one of the largest Combilift dealership in the country and currently operates out of 4 physical locations: Tomball (Houston), DFW, San Antonio, and Lafayette. As our company continues to grow, we are looking to add qualified employees to our team.Combilift Depot was established in 2007 as a family owned and operated forklift dealership specializing in selling, renting, and servicing niche forklifts and attachments to end users. The company has grown to be one of the largest Combilift dealership in the country and currently operates out of 4 physical locations: Tomball (Houston), DFW, San Antonio, and Lafayette. As our company continues to grow, we are looking to add qualified employees to our team.

Job Description Do you have a passion for diagnosing, repairing and maintaining portable generators? Do you enjoy working on diesel engines? Do you share our commitment to provide power when you need it where you need it? If so, we should talk. We are Power Plus! A multi-industry leader in providing power when you need it, where you need it through intelligent and efficient power solutions. We work with Fortune 100 companies across the country such as Amazon, Wal-Mart, Costco, and more. We’ve built a 35-year reputation for excellence through our commitment to developing our people, providing exceptional, relationship-based customer service, and giving back to the community. Our biggest differentiator is the quality of our people, and the working environment we create for them, which really has to be seen to be believed. Currently we are seeking a candidate to join our United States Generator Rental team as a Diesel Mechanic. Benefits: • Medical, • Dental, • Vision, • Training and mentoring, • Employee Assistance Program, • 401(k) with matching, • Paid sick leave The position of Diesel Mechanic is primarily responsible to diagnose, repair and maintain portable generators. This position may also require but not limited to the following duties, field service repairs, re-fueling, delivering and picking up portable generators, technical support and some travel as needed. JOB RESPONSIBILITIES • Trouble shoot and makes repairs to generator fleet., • Working with operations manager and generator fleet manager to prioritize repairs, • Ordering of parts for repairs, • Must be able to operate a forklift, • Must be able to assist field operations when needed., • Ability to drive a company vehicle., • Must have extensive knowledge of diesel engines, • Generator experience a plus., • Is able to read and interpret wiring diagrams, • Working knowledge of both Isuzu, Cat, Cummins, Doosan, MQ, MMD, Volvo, and John Deere engines and generators a plus., • Able to use computer and related software to trouble shoot engine and generator controls, • Must have mechanical background. If you’ve always wanted to really make a difference, have your contributions mean something, and work for a place where loyalty, integrity, and hard work still means something, we want to hear from you! Plug into our social media pages! Find us on Instagram, LinkedIn and Facebook. Powered by JazzHR ydr44dtfzJ

Job Description Job Title: Fleet Mechanic Department: Fleet Maintenance Reports to: Fleet & Mechanical Director Effective Date: March 12, 2026, REV2 Job Summary: The Fleet Mechanic reports to the Fleet & Mechanical Director. The manager will provide directions on the mechanical repairs and preventative maintenance on all company vehicles, forklifts, trailers, and other equipment required to meet operational requirements. Supervisory Responsibilities: • None Duties/Responsibilities: • Diagnose, troubleshoot, and make adjustments and repairs to vehicles and equipment including, but not limited to, diesel and gasoline engines, fuel systems, drive train components, pumps, brake systems, air conditioning systems and other systems, and assemblies on assigned vehicles and equipment., • Review daily work assignments and complete scheduled and assigned work within the parameters assigned by the Fleet & Mechanical Director., • Use an established, systematic approach to learn as much as possible about a vehicle or equipment problem; then proceed through a step-by-step diagnosis process to identify the problem and take the necessary action to make the proper repairs and solve the problem., • Perform repairs in accordance with applicable manuals, guidelines, and regulations to ensure vehicles are safe and reliable., • Complete preventative maintenance on all vehicles according to an established schedule. Preventive maintenance activities include but are not limited to inspection and diagnostic testing of vehicles, checking and adding or changing fluid levels, adjusting vehicle engines, mechanical and electrical systems replacing parts as required., • Conduct road tests as required to evaluate work performed and isolate maintenance problems., • Respond, as required, to roadside assistance calls to make temporary or permanent repairs or adjustments to vehicles and equipment., • Complete repairs as needed on the Vertique system., • Pick up and deliver vehicles and equipment as required., • Diagnose and perform electrical, hydraulic, preventative maintenance and other repairs on forklifts., • Perform welding work on vehicles, equipment and tools as required., • Complete vehicle maintenance records to ensure all work is annotated properly., • Keep work area, shop, vehicle wash facility, and fuel island neat, clean and orderly at all times., • Ensure proper safety precautions are observed., • Practice “Safety Always” by adhering to safe working practices, Company policies, rules, and regulations., • Report all accidents and/or on-the-job injuries to your supervisor, a member of management, or Human Resources in accordance with the protocol listed in the Faust Employee handbook., • Adhere to Faust’s safety training policy and procedures., • Comply with all relevant company policies and procedures outlined in Faust Employee handbook. Required Skills/Abilities: • Excellent verbal and written communication skills., • Excellent interpersonal and customer service skills., • Excellent organizational skills and attention to detail., • Excellent time management skills with a proven ability to meet deadlines., • Strong analytical and problem-solving skills., • Ability to prioritize tasks., • Ability to function well in a high-paced and at times stressful environment., • Ability to operate tractor trailer trucks, 8 bay trucks, mules, power jacks and forklifts. Education and Experience: • High school diploma or equivalent., • One year of previous mechanical experience (preferred)., • Valid Class ‘A’ Commercial Texas Driver’s License, • Texas Motor Vehicle Report (MVR) that meets Company Policy, • Valid Department of Transportation Medical Examiners Certificate, • Knowledge of FMCSA’s rules and regulations pertaining to vehicle operation and driver requirements Physical Requirements: • Strength to lift, load, push, and pull items weighing up to 150 pounds., • Manual dexterity to operate a dolly, four/six-wheeler cart, and a powered/manual pallet jack., • Ability to consistently bend, reach, and squat while working on trucks and equipment for up to 12 hours daily., • Stamina to continuously stand and walk up to 12 hours a day., • Exposure to indoor and outdoor weather conditions include high and low temperatures, wind, ice, humidity, rain, fog, hail, sleet and snow. Daylight, twilight, evening and dark lighting conditions Never Occasionally (.25-2 .5 hrs. per day) Frequently (2.5-5.5 hrs. per day) Continuously Frequently (5.5+ hrs. per day) Sitting X Standing X Walking - Short/Long Distance X Lifting or carrying X Hand-Lifting Cargo X Pushing or pulling X Reaching Overhead X Reaching At or Below Shoulder Level X Keyboarding X Driving X Stooping X Crouching X Kneeling X Crawling X Climbing Ramps or Stairs X Climbing Ladders X Speaking X Hearing Requirements X Visual X Operate Machinery Trucks X Never Occasionally (.25-2 .5 hrs. per day) Frequently (2.5-5.5 hrs. per day) Continuously Frequently (5.5+ hrs. per day) Forklift X Power Pallet Jack X Manual Pallet Jack X Conveyor Belt X Use Hands For: Pushing/Pulling X Fine Manipulation X Lift/Carry: 0-10 lbs. X 10-20 lbs. X 20-50 lbs. X 50-100 lbs. X 100+ lbs. X

Job Description???? Now Hiring: Assembler Mechanic Location: Houston Tx, 77041 Industry: Oil & Gas / Industrial Reports To: Warehouse Manager ???? Why This Role Stands Out Ready to get hands-on and build something that matters? As an Assembler Mechanic, you won’t just be putting parts together—you’ll be working on critical equipment used in real-world oil & gas operations. If you enjoy working with tools, solving problems, and staying active on the job, this is for you. ???? What You’ll Be Doing • Build and assemble mechanical components using blueprints and technical drawings, • Inspect and test equipment to ensure top-quality performance, • Troubleshoot and fix assembly issues on the spot, • Package and prepare finished products for shipment, • Operate forklifts and move materials safely throughout the warehouse, • Maintain tools, equipment, and a clean, organized workspace, • Support installation prep, lifting, and positioning of materials, • Work closely with your team to keep operations running smoothly???? What We’re Looking For, • Experience in mechanical assembly, manufacturing, or warehouse work, • Strong mechanical skills — you know your way around tools, • Ability to read diagrams, blueprints, or assembly instructions, • Detail-oriented with a focus on quality and safety, • Team player with a strong work ethic, • Forklift experience (or willing to get certified)???? Physical & Work Environment, • Active, hands-on role — expect to be on your feet, • Lifting up to 50 lbs, • Working in warehouse conditions (heat, cold, and everything in between)???? Why You’ll Love It Here, • Fast-paced, hands-on work — no boring desk job, • Opportunity to grow your mechanical skills, • Be part of a team that keeps operations moving

Job Description NOW HIRING!! Description We are seeking a motivated Entry-Level HVAC Assembly Technician to join a growing commercial/industrial team. This is not a basic “bolt-it-together” position, you will be responsible for the full layout, piping, and wiring of specialized HVAC equipment from start to finish. In this role, you will work directly from blueprints and schematics to mount motors and mechanical components, route and secure piping, run and terminate wiring, and solder refrigerant lines. You'll be hands-on throughout the entire build process, taking ownership from initial layout to final assembly. The ideal candidate has foundational experience with piping systems, cable routing, equipment mounting, and basic wiring in commercial or industrial environments. Strong mechanical aptitude, attention to detail, and the ability to work safely in a fast-paced production or shop setting are essential. This is a great opportunity for someone looking to grow their skills within large-scale HVAC assembly and industrial mechanical systems. Qualifications: • Layout equipment on skids and mount/align motors and bearings, • Route and install refrigerant piping, instrument air piping, and perform all required soldering, • Route and install electrical cabling and conduits according to job orders, • Read and interpret engineering drawings and product schematics to ensure every build meets specifications, • Reassemble all types of equipment after the coating process is complete, • Operate a forklift to safely move equipment and supplies around the shop, • Coordinate with the Engineering team and Shop Supervisors to troubleshoot and resolve issues, • Complete assigned tasks within the bid hours with little to no rework, • Valid driver's license, • At least 3 years of HVAC assembly experience, specifically with refrigerant piping, soldering, and electrical circuits, • Possession of a personal basic mechanic tool set, including wrenches, drills, and crimpers, • Ability to operate a forklift and communicate clearly with the team in English, • Strong logical planning skills and the ability to work productively in a team environment, • High School Diploma or GED preferred, • EPA Certification is a plus Candidates already registered with us, please send an updated resume to and reference the job title. If you are not already registered, please apply by clicking the "Apply Now" button.

Job Description Earn Up to $100K as a Skilled Industrial Mechanic – Hands-On Role with Stability & Growth Where You’ll Work Join a well-established industrial operation in Houston, TX supporting blending, material handling, and distribution processes. This is a hands-on role in a fast-paced environment where your mechanical and fabrication skills directly impact production and reliability. Job Highlights • Pay: $85,000 – $100,000 annually, • Schedule: Full-time (overtime and on-call as needed), • Location: Midland, TX, • Stable, long-term opportunity in an industrial setting, • Opportunity to work on a wide range of mechanical systems and fabrication projects Responsibilities • Diagnose and repair industrial equipment including motors, pumps, conveyors, valves, and gearboxes, • Perform preventative maintenance such as inspections, lubrication, alignment, and part replacement, • Troubleshoot hydraulic and pneumatic systems, • Fabricate and install components such as platforms, guards, piping, and structural supports, • Read blueprints and perform welding (MIG, FCAW, Stick) for repairs and custom builds, • Follow all safety procedures including LOTO and hot work protocols while maintaining accurate maintenance records Requirements • 10+ years of experience in industrial maintenance, millwright work, or fabrication, • Strong troubleshooting skills with mechanical systems (motors, pumps, conveyors, etc.), • Proven welding and fabrication experience, • Experience with industrial safety procedures (LOTO, PPE, hot work), • Ability to lift, climb, and work in physically demanding environments, • Ability to safely operate tools, rigging, and lifting equipment, • Must have flexibility to travel between Houston and Midland facility Preferred Qualifications • Experience in bulk material handling, blending, or transloading operations, • Forklift or rigging certifications, • Basic electrical troubleshooting knowledge (motors, VFDs), • Experience with maintenance tracking systems (CMMS) Call to Action Ready to put your mechanical and fabrication skills to work in a high-impact role? Apply today and take the next step in your industrial career. Our team will review your application and connect with qualified candidates quickly. About LINK Staffing: For over 40 years, LINK Staffing has been a trusted leader in light industrial staffing, helping hardworking people find great opportunities with reputable employers. With offices throughout Texas, we specialize in connecting skilled talent with roles in manufacturing, logistics, warehousing, and distribution. Our mission is to create a positive impact by providing dependable workers to growing businesses while offering our field staff safe, stable, and rewarding jobs. At LINK Staffing, we believe in doing things the right way—treating every employee with dignity and respect, delivering exceptional service to our clients, and building lasting relationships rooted in trust. We’re proud to be a company where people come first, and results follow. Company DescriptionAt LINK Staffing, we help job seekers like you find employment faster and more easily. Our team of staffing experts take the guesswork out of job hunting and help you find the right opportunities with less effort. Our unique commitment to enhanced employee benefits, payroll flexibility, and career development make us the perfect partner in finding opportunities throughout Texas.At LINK Staffing, we help job seekers like you find employment faster and more easily. Our team of staffing experts take the guesswork out of job hunting and help you find the right opportunities with less effort.\r\n\r\nOur unique commitment to enhanced employee benefits, payroll flexibility, and career development make us the perfect partner in finding opportunities throughout Texas.

Job DescriptionCompany Description SMIT Salvage has an extensive track record and its clients include many leading insurers. SMIT Salvage has specialized equipment and expert staff, and it can respond to incidents throughout the world 24/7. Operations are managed from four strategically located locations with respect to major international shipping routes: Rotterdam, Houston, Cape Town, and Singapore. The offices have a 24-hour link to clients, ships, the other offices of the Boskalis Group and agents worldwide. Working at Boskalis is about creating new horizons and sustainable solutions. In a world where population growth, an increase of global trade, demand for (new) energy and climate change are driving forces, we challenge you to make your mark in finding innovative and relevant solutions for complex infrastructural and marine projects. Within a vibrant company culture, you will be working as part of a diverse, international team of experts. We offer you the opportunity to realize your full personal potential and expand your professional career by creating new horizons. Together! Job Description Make your mark as a Warehouse Mechanic at Smit Salvage! As Warehouse Mechanic, you are responsible for the safe operation, maintenance, storage, and readiness of designated company equipment at our Houston warehouse. You ensure that assets are properly maintained, certified, and available for projects, and you coordinate equipment mobilization and demobilization in close cooperation with project teams. You provide hands-on technical support during equipment preparation, testing, troubleshooting, and repairs—both in the warehouse and in the field when required. In addition, you maintain accurate equipment and maintenance data and play an active role in the implementation and day-to-day use of the Equipment Management Platform (EMP). Your responsibilities as a Warehouse Mechanic • Operate, inspect, maintain, and store designated equipment., • Execute planned and unplanned maintenance activities., • Support mobilization and demobilization of equipment for projects., • Provide technical support to project teams., • Maintain equipment records, documentation, and reporting in EMP., • Contribute to cost control, spare-part management, and tender input., • A technical or vocational education in mechanical, electrical, or related disciplines., • Experience in equipment maintenance, mechanical repair, and technical warehouse operations., • Experience with maintenance planning, troubleshooting, and equipment mobilization/ demobilization., • Certified or experienced forklift operator., • Good command of English (spoken and written)., • Experience in marine, offshore, industrial, or heavy-equipment environments., • Familiarity with asset or equipment management systems (e.g. EMP)., • Experience with specialized equipment (e.g. diving systems).Qualifications What you can expect • Career opportunities: We challenge you every day to get better. Together we realize your full personal and professional career by creating development opportunities., • Your team: As a Warehouse Mechanic you will work for SMIT Salvage Houston. You will work for one of the largest salvage companies in the world. You will also work with various other colleagues who are part of the worldwide Salvage team., • Where you will work: You will work at our warehouse in Houston., • Full-time: The Warehouse Mechanic position is full-time (40 hours per week)., • Procedure: You can easily apply by filling in the online application form and uploading your CV and cover letter. You will always receive an immediate confirmation of receipt by e-mail. It is not possible to apply by email, the contact form or by post. Depending on the position, we invite you for two or more job interviews. If you have successfully completed all steps, you will receive an offer from us and we would like to welcome you to Smit Salvage Houston! Additional Information Interested? Apply by filling in your details and uploading your CV and cover letter on our careers site. Please note: Boskalis never requests a financial contribution to arrange visas or other documents related to a job vacancy. Be wary of individuals who pretend to be our recruiters and do ask for such contributions. Disclaimer for Recruiters and Recruitment Agencies We appreciate your interest in our vacancies and understand that your candidate might be enthusiastic about this exciting opportunity. However, our recruitment process is not structured this way, at Boskalis we handle recruitment ourselves. There fore we do not accept unsolicited applications or CVs from recruitment agencies. Any submission will be treated as a direct application.

Job Description JOB SUMMARY The Shop Lead (2nd Shift) position will perform and oversee a variety of mechanical operations / tasks on turbomachinery components and assemblies to ensure compliance with specifications and quality requirements. Essential Functions: • Provide oversight and leadership to all craft workers during 2nd shift including Balance, Machining, Mechanic, and Welding, • Provide concise hand-over notes to 1st shift highlighting status, issues, and opportunities., • Gives guidance and has ability to disassemble, inspect, repair, and reassemble RMS and non-OEM turbomachinery including compressors (centrifugal, liquid ring, etc.), gearboxes, pumps, turbines, etc., • Ensures that shipments and deliveries are made without issue, and at times will be mainly responsible to offload oversize goods using overhead crane or large forklift. Responsible for maintenance of all shipping paperwork during shift., • Able to inspect and record measurements of component parts to customer, OEM and industry standard specifications using a variety of precision measuring instruments, tools and gages., • Basic understanding of dynamic balancing equipment and how to build & balance various rotating elements., • Basic understanding of various machine tool setups and operation, • Coordinates material movements between work areas and with shipping / receiving., • Notifies Quality and Production Leadership in the event of non-conformity and drives for speedy resolution., • Analyzes and understands present and future workload / capacity and can re-prioritize / redirect work as needed., • Maintain a safe working environment and a commitment to safety excellence., • Responsible for understanding and driving adherence to safety policy, procedures, and instructions., • Leads group in maintaining a clean and organized work area. Education: • High School Diploma / GED from an accredited school or institution., • Safety-first mindset with self and coworkers., • Set up and performing of hydro or gas leak tests., • Familiarity with OEM products (AC Compressor / Conmec / RMS) with ability to quickly understand non-OEM rotating equipment., • Communicate with supervision, crafts, and customers during the inspection and repair process., • Excellent organization skills., • Expert in use of precision measuring equipment (mic, caliper, etc.)., • Ability to lead in a team environment., • Ability to coach / mentor within the extended team, • Ability to work overtime, weekends and holidays, as required., • Ability to work in an environment of constant pushing, pulling, lifting, stretching, bending and other physical activities., • Ability and willingness to be in the shop environment a minimum of 8 hours per day, primarily standing and sitting, as required., • Ability and willingness to work around and use large propane / acetylene torches., • Ability to operate small lifts, pallet jacks and other lifting equipment., • Strong oral and written communication skills., • The position will be based full time in our Houston, TX facility (77034)., • Able to pass a pre-employment drug and alcohol test, physical and background check., • This is a full-time position, with a minimum expectation of 40 hours per week. Additional hours, including evenings or weekends, may be required based on project needs., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Ability to understand, read, write, and speak English proficiently., • Ability and willingness to lift objects weighing up to 30 lbs., 50 lbs. with assistance., • Ability to walk, climb, reach above head, and balance., • Authorized to work in the United States., • While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift., • Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance., • Must be able to use hands for assembly and tool usage. While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts in a machine-shop environment. WHAT WE OFFER • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs, • Employee Reimbursement Programs, • Tool, Shoe, and Safety Glasses reimbursement ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Position: Field Service Technician Location: Houston, TX Reports to: Service Manager Employment: Full-Time FLSA Status: Non-Exempt WHO WE ARE Stasis Drilling Solutions, LLC is a privately held oilfield services (OFS) provider headquartered in in Houston, TX with operations throughout the lower 48 of the United States. job description A Field Service Technician will provide shop maintenance and troubleshooting support, maintain MPD and RCD equipment, and maintain and keep Stasis and client quality, health, safety, and environment systems compliance. responsibilities *Not an all-inclusive list • Assist with rigging up and down all MPD and RCD equipment, attaching and detaching high- and low-pressure steel lines/hoses, • Install, service, and repair equipment components, • Use gauges, multi-meters, meggers, scopes, and other test instruments to diagnose malfunctions in electromechanical devices and use mechanic tools to disassemble, repair, and reassemble system components, • Maintain computers and software packages relevant to the design, modification, installation, and calibration of electrical and instrumentation systems, • Maintain and calibrate process implementation devices, electrical power distribution and monitoring devices, servo drives, and motor controls, • Perform preventative and predictive maintenance including calibration, using data collectors, testing and diagnostic tools, and computerized maintenance systems, • Electrical systems integration and troubleshooting of systems, as well as supervision and mentoring other technicians in basic electrical, • Conduct inspections and tests to ensure that MPD equipment is functioning properly and meets safety and environmental standards, • Assist in diagnosing equipment failures and pulling choke apart when necessary to clean and service, • Take initiative and work independently during downtime, • Ability to identify choke and RCD components, • Repair RCD bearings and chokes in a workshop setting, • Pull and stage inventory and assets for upcoming jobs, • Operate forklift safely, • Troubleshoot and repair equipment, • Strong communication in English (both written and verbal), • Proactive analytical skills with attention to details and process improvements, • Ability to follow all required safety instructions as per company policy, • Exhibit punctuality and leadership through servitude behavior, • Ability to work with minimum guidance as well as in a team-based environment, • Ability to work in a heavy industrial environment, which includes working around constantly moving overhead machinery, being in close proximity to loud equipment, and handling potentially hazardous materials, • Ability to repetitively climb steep stairs and lift/carry 50+ pounds independently, • Ability to stay alert and focused for 12+hours while performing repetitive and routine activities including, but not limited to, walking, standing, or sitting, • Ability to bend, stoop, kneel, twist, and crawl throughout the work shift, • Ability to use heavy-duty handheld and long-handled tools, • Ability to work closely with others in a confined area and live together in crew quarters when needed, • Ability to travel and work in remote locations, working 12+ hour shifts that can include days, nights, weekends, and holidays, • Clear vision to judge near and far distances We offer a competitive benefits package that includes: • Earned Paid Time Off (PTO), • Medical, Dental, and Vision coverage, • Health Savings Account (HSA) options (with eligible medical plans), • 401(k) retirement plan, • Company-paid Life Insurance, • Voluntary Life & AD&D, • Critical Illness and Hospital Indemnity coverage, • Pet Insurance Disclaimer This job description is provided for informational purposes only and is intended to describe the general nature and level of work assigned to this position. It does not constitute a contract, express or implied, and does not guarantee specific duties, responsibilities, hours, compensation, or employment for any definite period of time. The Company reserves the sole right to interpret, modify, assign, reassign, or eliminate duties and responsibilities at any time, with or without notice, to meet business needs. Employment with Stasis Drilling Solutions, LLC is at-will and may be terminated by either the employee or the Company at any time, with or without cause or notice, subject only to applicable law. No supervisor, manager, or representative of the Company has authority to enter into any agreement contrary to the foregoing except through a written agreement signed by the Company’s authorized executive.