Offres heavy equipment operator à Los Angeles, CaliforniaCréer des alertes d'emploi

Job Description DCX-CHOL Enterprises is a privately held American owned Small Business. We are made up of five vertically integrated manufacturing and assembly divisions, each with their own history, specializations and products. Each division compliments the other with their unique skills and products and at the same time, each work together as a vertically integrated team to provide the most cost effective, high-quality interconnect products to our customers on time. Masterite Division of DCX-CHOL Enterprises Inc. is seeking an experience SMT Operator with the following qualifications: SUMMARY OF POSITION: Utilize SMT machines to place surface mount parts and solder reflow the devices to the printed circuit board. Responsible for the set-up of all pieces of equipment on the SMT line, including the screen printer, the pick and place machines and the reflow oven. Key Performance Indictors: List two to five measurable tasks that are key to indicating the performance level in this role: • Operate SMT Equipment, • Preventive Maintenance SMT and Production Equipment, • X-Ray setup and training, • Batch Cleaning, • Independently operate SMT automatic assembly equipment: Screen Printer, SPI, Pick & Place, Reflow Oven to produce high quality complex circuit board assemblies., • Responsible to setup, read and understand Set-up lists, Assembly Instructions, and assembly notes., • Prepare and load components to feeders, • Familiar with the ESD handling procedures of sensitive electronic devices, • Familiar with IPC-A-610 and JSTD-001 Acceptability of Electronic Assemblies., • Identify manufacturer’s part number markings on various components., • Identify critical component features: Package type and Size, • Identify, document, and report non-conforming material., • Perform routine maintenance for production equipment., • Other duties may be assigned. Qualifications and Experience: • Experience in SMT industry (minimum of 3 years)., • SMT equipment experience: Screen Printer, SPI, Pick & Place, Reflow Oven and AOI, • Must IPC-A-610, IPC-A-620 and JSTD-001 Class 3 Certified or Knowledge (minimum of 3 years), • Ability to be trained for equipment maintenance, • Familiarity with ovens, hot plates, hot air pencil, etc., • Must be able to understand and follow verbal instructions and be detailed oriented., • Maintain a clean, safe well organized work-station through routine housekeeping., • Normal work time spent indoors, • A neat and tidy personal appearance must be maintained;, • Occasional periods of high levels of physical exertion needed, this includes heavy, • lifting (50+ lb.), walking, bending, pushing large loads, carrying, stooping, reaching, etc. DCX-CHOL Enterprises Inc. is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. DCX-CHOL Enterprises Inc. is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. DCX-CHOL Enterprises Inc. will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee’s Form I-9 to confirm work authorization via E-Verify.

Job DescriptionDescription: Jade Range LLC, from its inception in 1968, has been committed to providing the best in quality cooking equipment. Today, this commitment continues as we strive to deliver a durable, efficient, sustainable product. With a vision towards the future, Jade Range is continually redefining technology with regards to design, engineering, manufacturing, quality control and customer-oriented service. Jade Range is a custom manufacturer, interfacing with high end commercial customers. Press Brake Operator Job Summary The primary responsibilities of a Brake Press Operator are to bend sheet metal in accordance with design specifications and to ensure each piece produced is free of defects. Press Brake Operator Duties and Responsibilities • Studying blueprints and specification sheets to understand technical requirements, • Setting a computer-controlled press brake to project specifications, • Ensuring proper positioning and alignment of metal inside the press brake, • Monitoring the pressing process, • Measuring and inspecting the finished sheet metal to ensure it matches specifications, • Troubleshooting and addressing problems that arise during the pressing process, • Performing routine maintenance on the press brake, • Complying with all health and safety standards in the manufacturing facility Requirements: Press Brake Operator Requirements and Qualifications Physical Requirements Position requires the ability to stand, stoop, bend throughout the workday Must be AVAILABLE for overtime IF needed Must be able to lift up to 50 pounds at times Required Skills/Abilities: • Great attitude, • Must have experience with Amada, • Team player, • Ability to work in a fast-paced environment, • In-depth understanding of the parts of a press brake and how the machine works, • Computer skills to operate CNC software, • Ability to remain upright and perform repetitive movements throughout most of a work shift, • Ability to move heavy or large pieces of metal from one place to another, • Familiarity with blueprints and the terminology used in technical specification sheets, • Arithmetic skills to perform measurements and calculate settings High school diploma preferred US work authorization (Required)

Job DescriptionDescription: We are looking for a machine operator to join our 2nd shift team in Gardena, CA. The Machine Operator plays a critical role in the operation and maintenance of machinery in our sheet metal manufacturing plant. This position is responsible for ensuring smooth production operations across a range of metal products, maintaining product quality, and adhering to safety standards. Essential Duties and Responsibilities: • Operate various metalworking machinery such as presses, shears, and roll formers., • Set up equipment for production runs and make necessary adjustments to ensure optimal performance., • Monitor machine operations and production processes to meet quality and quantity targets., • Perform quality control checks on finished products to ensure adherence to specifications., • Conduct routine maintenance and troubleshooting of machines to prevent downtime., • Follow all safety guidelines and use appropriate personal protective equipment (PPE)., • Maintain accurate records of production activities, including materials used and machine performance., • Accurately use scanners to issue and complete work ticket reports., • Assist with receiving, inspecting, and organizing materials., • Collaborate with team members and supervisors to ensure efficient production processes., • High school diploma or equivalent preferred., • Previous experience operating machinery in a manufacturing or metalworking environment preferred., • Strong mechanical aptitude and problem-solving skills., • Ability to read and interpret technical drawings and production orders., • Familiarity with safety standards and best practices in a manufacturing environment. Physical Demands: The role requires the ability to handle various physical demands, including: • Regularly lift, push, or pull materials, which may occasionally exceed 50 lbs., • Standing for extended periods., • Frequent bending, twisting, kneeling, and operating heavy machinery., • Repetitive tasks, including machine operation and quality inspections. This position is non-exempt and complies with California's wage and hour laws. Compensation for this role is $18.06 per hour. Benefits: • 401(k), • Health Insurance (Medical, Dental, Vision), • Life Insurance, • Paid Time Off (PTO), • Monday–Friday: 1:30 pm to 10:00 pm Equal Opportunity Employer: Bay Cities Metal Products is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive environment for all employees and applicants, regardless of race, color, religion, gender, sexual orientation, national origin, disability, or any other characteristic protected by California or federal law. At-Will Employment Disclaimer: Employment with Bay Cities Metal Products is at-will, meaning either the employee or the company may terminate employment at any time, with or without cause or notice, in accordance with California law.

Job Description Packaging Machine Operator Position Overview: The purpose of the position is to produce stick packs with customer supplied components to customer specifications and WePackItAll quality standards. Responsibilities are to know how to completely assemble and setup stick pack machines as well as disassemble and clean the machines, know how to operate, troubleshoot and adjust the machines, do quality inspection and seal tests during production. Consistently produce quality product while following all GMP guidelines. The position requires the ability and knowledge to work with machinery and tools. Work with items that are heavy, use a stool and be able to climb stairs or ladders. The position requires to work independently, with team members, and have a sense of urgency to keep production running. Work schedule is Monday through Friday with potential weekend work based on business needs. Key Responsibilities: A good machine operator is a self-motivated team player. They have the skills to successfully work with their assigned machinery to keep it running efficiently, produce quality sticks, and verify only satisfactory sticks transition into a finished good. Effective machine operators can think on their feet, make quick decisions, and have strong attention to detail to ensure no machinery issues go unnoticed. • Understands and enforces all GMPs, SOP’s and SAFETY PROTOCALS., • Attend and perform work where no harm is caused and practice safe work habits., • Always apply safety measures, do not avoid safety features and employ unsafe behavior that can cause any risk or harm., • Ensure that all machine guards and safety devices are properly located and in place., • Ensure all safety devices are in place and in working order. (Door sensors, “E” stops)., • Notify immediate supervisor or any other WPIA member of leadership of any safety device failures., • Follow all sanitation procedures by following processes, safety requirements, and maintaining a clean room. No scrap laying around, tools placed back on shadow board, area picked up and organized., • Adheres to and enforces all safety requirements and wears all required safety equipment., • Conduct routine inspections of efficiency and systems of safety., • Ability to read and interpret documents such as safety regulations, manuals of operations and maintenance instructions., • Understands the specifications on the work order and verify the components in the room as required by work order., • Clean, set-up, and fine tune the production machine to meet quality standards and the specifications provided on the work order., • Responsible for inspecting all equipment parts to confirm no broken/damaged or missing parts. Non-conforming parts must be reported immediately to quality and maintenance personnel., • Perform Lockout/Tagout when working on sensitive areas such as replacing heaters, jaws, knives, disassembling, and reassembling of augers/formers etc., • Ability to run at a consistency of 80% efficiency or above., • Hit target yield of 94% or higher., • Adjust machine and equipment parameters based on setup sheet., • Constant communication with the technicians regarding current or ongoing issues using commonly used terminology., • Arrive to work on time and maintain company attendance standards., • Ability to work in a fast-paced environment where items are moving at a rate of approximately 300-400 items per minute., • Strong problem-solving skills and the ability to pivot in unplanned operations., • Maintains appropriate work behavior and professionalism with co-workers and management., • Rotate into various positions as required by production needs., • Experience with hand tools required to perform job responsibilities (Rubber Mallet, Allen Keys, and wrench etc.)., • Maintain running efficiency of 80% average or above., • Ability to operate multiple Stick pack machines., • Identifies, resolves, and communicates safety, quality, or productions issues., • Identifies, assembles/disassembles, installs augers and/or formers., • Notifies maintenance personnel of seal jaws wear and tears., • Demonstrates the proper procedure on how to install the vacuum system. (Volkmann/Piab), • Performs connection from supersack to Volkman., • Demonstrates the proper procedure on how to change and feed a roll of film through the machine., • Ability to complete dry clean/full clean., • Demonstrates proper set up and troubleshooting on ink jet or laser printers., • Demonstrates proper procedure on how to change both sets of sealing blocks and fin seal guides according to the work order specifications., • Exceeds all level 1 requirements., • Maintain running efficiency of 85% average or above., • Can diagnose any unusual noise on the machine and prevent major breakdown., • Can complete basic PM’s without the assistance of technicians., • Exceeds all level 1 and 2 requirements., • Maintain a running efficiency of 90% or above., • Ability to operate and train new operators on all stick pack machines., • 1 year minimum of machine operating experience, • Basic Computer skills, • Basic Math skills, • Able to read and understand instructions in English, • Packaging experience preferred, • 401(k) & Roth 401(k), • Employee Discounts, • Dental Insurance, • Health Insurance, • Vision Insurance, • Paid Life Insurance

Job DescriptionJob descriptionJob Description: Position Overview The Machine Operator - Grinder is responsible for setting up, operating, and maintaining grinding machinery to produce high-quality parts according to specified measurements and tolerances. This role involves monitoring the production process, performing inspections, and ensuring adherence to safety and quality standards. Key Responsibilities • Machine Operation:, • Set up and operate grinders, including surface, cylindrical, or centerless grinders., • Adjust machine settings, such as speeds, feeds, and tooling, to achieve the desired results., • Quality Assurance:, • Measure and inspect finished parts using precision tools (e.g., micrometers, calipers, and gauges) to ensure compliance with blueprints and specifications., • Identify and address any quality issues during the grinding process., • Machine Maintenance:, • Perform routine maintenance and cleaning of grinding equipment to ensure optimal performance., • Report any mechanical or technical issues to the maintenance team., • Production Monitoring:, • Read and interpret work orders, blueprints, and technical drawings., • Monitor grinding processes to maintain efficiency and minimize downtime., • Safety Compliance:, • Follow safety protocols and wear appropriate personal protective equipment (PPE)., • Maintain a clean and organized work area to reduce hazards., • Collaboration:, • Work closely with the production team, quality control personnel, and supervisors to meet production goals., • Assist in training new operators as needed.Qualifications and Skills, • Experience:, • Previous experience as a grinder operator or similar role in a manufacturing environment., • Familiarity with different types of grinders (surface, cylindrical, centerless, etc.)., • Technical Skills:, • Proficiency in reading blueprints and technical specifications., • Strong knowledge of grinding techniques and tool setups., • Ability to use precision measuring instruments., • Physical Requirements:, • Ability to lift heavy materials (up to 50 lbs) and stand for extended periods., • Good hand-eye coordination and manual dexterity., • Other Skills:, • Strong attention to detail and problem-solving skills., • Ability to work independently or as part of a team.

Job Description ROLE AND RESPONSIBILITIES Machine Operators I must have a strong understanding of the machines they work with and are responsible for ensuring our company produces on-time quality parts for our customers. In-depth training may be required to prepare a Machine Operator for their daily duties. The essential duties and responsibilities include, but are not limited to: • Ability to start and stop the machine safely without supervision., • Ability to place unfinished parts and remove finished parts from machine safely., • Monitor machine operation., • Check part quality with designated measurement instruments. Understand when and how to stop machine safely., • Assist in the maintenance, and repair of machinery., • Operate tools and machinery to aid the manufacturing process., • Perform periodic checks on equipment and troubleshoot issues as they arise., • Oversee the machine while executing tasks and make necessary adjustments to improve results., • Produce quality parts according to manufacturing targets and schedules as directed by the Plant Manager., • Record all machine actions and log completed parts for record keeping., • Assume responsibility for ensuring the duties of this position are performed in a safe and efficient manner., • Keep a clean and orderly work area., • Perform other duties that may be assigned by the Plant Manager. QUALIFICATIONS AND EDUCATION REQUIREMENTS • To perform this job successfully, an individual must be willing to learn and improve to perform each essential duty satisfactorily., • High school diploma or GED required. Adequate work experience may be substituted in lieu of diploma or GED., • Willingness to follow written or oral work instructions and perform repetitive tasks for extended periods of time. PREFERRED SKILLS • Previous machine operating experience in a manufacturing facility., • Familiarity of various manufacturing tools and machinery including but not limited to facers, lathes, CNC’s, and other mechanical machinery., • Bilingual language skills in English and Spanish., • Ability to work well with others, be organized and detail-oriented., • Ability to lift heavy equipment, to bend, and to stand or walk for long periods of time., • Willingness to work in shifts that may include early or late hours, weekends, or overtime if necessary. ADDITIONAL NOTES • Satisfactory pre-employment drug testing is required., • All applicants must be authorized to work in the U.S. COMPENSATION AND BENEFITS • After 30 days of employment, employee is eligible for company benefits including medical, dental, vision, sick pay, vacation accruals, and 401(k).

Job Description SUMMARY The Used Equipment Inspector inspects running condition of used heavy earthmoving and AG equipment for purchase or trade-in, providing technical support for equipment valuation, provide CAT Certified machine training of operation and safety to current and prospective customers. This job demands the ability to diagnose and estimate repairs understanding how a machine should operate and perform. RESPONSIBILITIES • Analyzes condition of heavy earthmoving and AG equipment considered for purchase or trade-in using the CATUSED.COM website., • Determine condition of equipment, whether the equipment is in good or poor condition, estimates repair costs, along with recommendation for purchase or trade-in., • Provide technical expertise and support to improve the products sold and serviced by dealer., • Maintains records of inspections, including photo of equipment as required., • Provides technical support to Sales Manager, sales and service departments as requested, such as Product Improvement Program (PIP) and attachments., • Reviews service repairs for accurate cost and quality., • Travels in and out of local territory to user/purchaser location(s) as required in the performance of equipment inspections and demonstrations., • Research new CAT Equipment to understand new options and operator procedures., • Maintains department vehicle and technical tools., • Reviews service repairs for accurate cost and quality, • A fit with Quinn Company’s performance driven culture and values of Integrity, Teamwork, Respect, Quality and Service, • Work safely at all times. Adhere to all applicable safety policies. Comply with all company policies, procedures and standards QUALIFICATIONS High School Diploma or GED required, Bachelor's degree desirable, and five to seven year’s related experience (methodical technician with substantial knowledge of heavy equipment) and/or training; or equivalent combination of education and experience. Valid California Driver's License as required for transportation and demonstration purposes. Company DescriptionOur history began in 1919 when Quinn Company supplied the Killifer Disc and Holt Tractor to the Fresno area farmers in their quest to develop the great San Joaquin Valley into the worlds richest agricultural region. In 1925, when Holt and Best Tractor Company merged to form Caterpillar Tractor Co. (now Caterpillar Inc.), Quinn became its dealer in the Fresno and Madera County area. Since then, we have expanded through acquisitions and grown along with the economy of California. Now in our fourth generation of family ownership, our operations span fifteen counties throughout central and southern California, including Arizona. Quinn now has 25 locations from Salinas to Foothill Ranch with more than 1600 employees to serve our customers. We are proud of the success we have built with the help of our customers, our employees and Caterpillar. history began in 1919 when Quinn Company supplied the Killifer Disc and Holt Tractor to the Fresno area farmers in their quest to develop the great San Joaquin Valley into the worlds richest agricultural region. In 1925, when Holt and Best Tractor Company merged to form Caterpillar Tractor Co. (now Caterpillar Inc.), Quinn became its dealer in the Fresno and Madera County area. Since then, we have expanded through acquisitions and grown along with the economy of California.\r\n\r\nNow in our fourth generation of family ownership, our operations span fifteen counties throughout central and southern California, including Arizona. Quinn now has 25 locations from Salinas to Foothill Ranch with more than 1600 employees to serve our customers.\r\n \r\nWe are proud of the success we have built with the help of our customers, our employees and Caterpillar.\r\n\r\n

Job Description About OPAL Fuels OPAL Fuels (Nasdaq: OPAL) is a leader in the capture and conversion of biogas into low carbon intensity RNG and renewable electricity. OPAL Fuels is also a leader in the marketing and distribution of RNG to heavy duty trucking and other hard to de-carbonize industrial sectors. For additional information, and to learn more about OPAL Fuels and how it is leading the effort to capture North America’s naturally occurring methane and decarbonize the economy, please visit . Position Summary We are seeking a highly skilled Industrial Mechanic with experience in steam power generation to join our team as a Mechanic and Plant Operator at a small steam boiler power plant in West Covina, CA. This position blends hands-on mechanical maintenance with operational oversight of steam generation systems. Reporting to the Lead Plant Operator, the successful candidate will play a key role in ensuring reliable plant performance, maintaining equipment integrity, and supporting safe, efficient power production. The primary objectives of this role are to maximize output, minimize downtime, and uphold the highest standards of safety, cleanliness, and environmental compliance. Duties and Responsibilities • Operate, monitor, and maintain steam boiler systems, turbines, and auxiliary equipment., • Conduct daily checks of operating equipment, including flow meters, gas chromatographs, fluid levels, pressure and temperature readings, and unusual noises to identify and correct issues before failure occurs., • Sample feedwater and boiler water regularly, analyze results, and maintain proper water chemistry to ensure safe and efficient boiler operation., • Perform preventative and corrective maintenance on mechanical systems, pumps, valves, and rotating machinery., • Install, align, and repair industrial equipment in accordance with millwright standards., • Troubleshoot mechanical and operational issues to minimize downtime., • Assist in planning and scheduling maintenance activities., • Maintain detailed records of production data, equipment operating hours, service schedules, inspections, and maintenance activities., • Follow all safety protocols and environmental regulations to ensure compliance., • Maintain a high level of cleanliness in and around the plant: prevent oil accumulation, keep equipment and floors presentable, and maintain the yard and perimeter fence., • Keep all on-site parts and supplies stocked, organized, and inventoried., • Operate the plant with a strong focus on safety: clean spills immediately, ensure lighting systems are functional, eliminate slip/trip hazards, and promptly address electrical or mechanical issues. Confirm that all visitors, mechanics, and contractors follow safe work practices., • Work with internal resources to resolve operational and mechanical problems., • Ensure adherence to company policies, procedures, regulatory requirements, and safety standards., • Communicate material and personnel issues clearly to area managers., • High school diploma/ GED equivalent, • Unlimited Steam License or Minimum 3–5 years of experience in mechanical maintenance and plant operations, ideally in power generation., • Journeyman- level Industrial Mechanic or Millwright certification is preferred., • Proficiency in equipment alignment, rigging, and mechanical assembly., • Ability to read and interpret technical drawings, schematics, and manuals., • Ability to work independently and as part of a team., • Commitment to workplace safety and regulatory compliance., • Willingness to work shifts, weekends, or on-call as required., • Basic electrical knowledge is preferred., • Strong knowledge of steam boiler systems, pumps, compressors, and rotating equipment., • General troubleshooting abilities., • Skilled in recordkeeping and logging., • Computer skills (Microsoft Office)., • Must be self-motivated and perform most tasks with little or no supervision. Physical Requirements The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position requires physical effort such as that associated with driving a motorized vehicle, operate an ATV, using hand tools, and typing on a computer. Position requires moderate lifting (10-50 lbs.), occasional need to walk on irregular surfaces, and occasional stooping, kneeling, climbing, or crouching. Also requires the use of hands and arms to operate/examine gas meters, flow meters, hand tools, power tools, bridge and jib cranes and test/diagnostic equipment. Job Type Full-time Pay The range for this role is anticipated to be $35.00 - $39.00 hourly with bonus for eligible positions. Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. Benefits • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Short & Long Term Disability, • 401(k) plus Matching Contributions, • Tuition Assistance, • Referral Bonus, • Generous Paid Time Off, • Ten Paid Holidays per year OPAL Fuels LLC is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, creed, national origin or ancestry, ethnicity, sex (including gender, pregnancy, sexual orientation, and gender identity), age, physical or mental disability, citizenship, past, current, or prospective service in the uniformed services, genetic information, or any other characteristic protected under applicable federal, state, or local law. OPAL Fuels does not accept unsolicited resumes from third-party recruiters or agencies without a current signed agreement and written confirmation specifying the roles for which submissions are authorized. Any resumes submitted without an agreement and authorization will be considered the property of OPAL Fuels. Powered by JazzHR iXzZ1bVtBj

Job Description M.S. Aerospace Inc. (MSA) is an aerospace manufacturer of high strength specialty fasteners, including bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government, including the ISS, Space Shuttle and the most demanding defense equipment. We also support the most demanding OEMs in the commercial aviation industry. We offer a competitive benefits package including medical, dental, vision, and a monthly bonus. Join one of the fastest-growing aerospace companies by applying now ! Maintenance Mechanic Department: Maintenance Department/ Area: Maintenance Position Summary: Maintenance Mechanic will manage and troubleshoot the day-to-day maintenance needs of all equipment and machinery. Responsibilities include maintenance and repair of manufacturing equipment such as such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment using hand tools, power tools, and precision-measuring and testing instruments. The Maintenance Mechanic Operator will observe mechanical devices in operation and listens to their sounds to locate causes of trouble. Dismantles devices to gain access to and remove defective parts using hoists, cranes, scissor lifts, forklifts, hand tools, welding, and power tools. Repairs or replaces defective parts, using hand tools and power tools, etc. Installs special functional and structural parts in devices, using hand tools and power tools. May set up and operate a lathe, drill press, grinder, and other metalworking tools to make and repair parts. May initiate purchase order for parts and machines. Minimum Qualifications: · High School graduate or equivalent. · 3+ years of maintenance experience manufacturing environment performing mechanical, pneumatic, hydraulic, minor electrical. · Knowledge of electric motors, generators, pumps, pressure systems, water systems and other equipment and systems found in fastener manufacturing facilities · Knowledge of the occupational hazards and safety precautions of the building maintenance trades. · Knowledge of the proper use of chemicals. Ability to do routine mechanical or electrical maintenance and care for tools and equipment. · Ability to work from sketches, drawings, and blueprints. Ability to maintain records regarding material, equipment, and repairs. Reporting Relationships: Will report to the Maintenance Manager Working Conditions: First shift position. Standing stooping, bending, squatting, and sitting, walking both inside and outside. Some warm weather conditions, some cold weather conditions depending upon seasons. The job duties require an employee to bend, reach, kneel, and stand for extended periods. The job duties may require an employee to climb ladders. The job duties may require an employee to move heavy objects. Position type: Requires full work time only. 8 hours a shift- Monday to Friday - overtime expected depending on production needs. Regular attendance is an essential job function. This job description in no way states or implies that these are the only duties to be performed by this employee. He or she will be required to follow any other instructions and to perform any other duties requested by his or her supervisor. M.S. Aerospace Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. M.S. Aerospace Inc. will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of Los Angeles Municipal Code, Chapter XVIII, Article 9. M.S. Aerospace Inc. 13928 Balboa Blvd Sylmar, CA 91342. Company DescriptionMSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications. M.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA: Materials Engineer Evaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices. Will accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field. 40 hours/week; $99,278.00 - $105,000.00/year Apply on-line w/ ref# at: Reference Number: HS-MSA EEO employer: including race, gender, disability & veteran status. We offer Medical, Dental, Vision, and 401K benefits.MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications.\r\n\r\nM.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA:\r\n\r\nMaterials Engineer\r\n\r\nEvaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices.\r\n\r\nWill accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field.\r\n\r\n40 hours/week; $99,278.00 - $105,000.00/year\r\n\r\nApply on-line w/ ref# at:\r\n Number: HS-MSA\r\nEEO employer: including race, gender, disability & veteran status.\r\n\r\n\r\n\r\nWe offer Medical, Dental, Vision, and 401K benefits.

Job Description About the Role The Warehouse Handler plays a critical role in ensuring the efficient operation of warehouse activities within the transportation and warehousing industry. This position is responsible for the accurate receipt, storage, and dispatch of goods, maintaining inventory integrity and supporting supply chain processes. The Warehouse Handler contributes to a safe and organized work environment by adhering to safety protocols and handling materials with care. This role requires collaboration with team members and other departments to meet daily operational goals and deadlines. Ultimately, the Warehouse Handler ensures that products are handled efficiently and delivered on time, supporting overall customer satisfaction and business success. Key Responsibilities Minimum Qualifications: • High school diploma or equivalent., • Ability to lift and move heavy objects safely, typically up to 50 pounds or more., • Basic understanding of warehouse safety procedures and protocols., • Experience operating warehouse equipment such as forklifts or pallet jacks (certification preferred but not mandatory)., • Strong attention to detail and ability to follow instructions accurately. Preferred Qualifications: • Forklift operator certification., • Previous experience working in a warehouse or logistics environment., • Familiarity with inventory management software and barcode scanning systems., • Basic computer skills for data entry and inventory tracking., • Good communication skills to effectively work within a team and report to supervisors. Responsibilities: • Receive, inspect, and verify incoming shipments against purchase orders and delivery documents., • Safely load, unload, and move materials using appropriate equipment such as forklifts, pallet jacks, and hand trucks., • Organize and store inventory in designated locations to optimize space and accessibility., • Prepare and package orders for shipment, ensuring accuracy and compliance with shipping standards., • Maintain cleanliness and orderliness of the warehouse to promote a safe working environment., • Conduct regular inventory counts and report discrepancies to management., • Collaborate with team members and supervisors to coordinate daily warehouse operations and resolve issues promptly. Skills The Warehouse Handler uses physical strength and stamina daily to handle and move materials safely and efficiently. Attention to detail is essential for verifying shipments, organizing inventory, and preparing orders accurately to prevent errors. Operating warehouse equipment such as forklifts and pallet jacks requires technical skill and adherence to safety standards to avoid accidents. Communication skills facilitate effective teamwork and coordination with supervisors to meet operational goals. Additionally, familiarity with inventory software enhances the ability to track stock levels and report discrepancies, contributing to smooth warehouse operations.

Job Description Underground Utilities/Grading Contractor is currently looking to fill full time positions for our current workload of Excavation of Wet Utilities ( Sewer, Water, Storm Drain), Dry Utilities(Edison, Att, Time Warner and Gas) and Grading (Rough/Fine). Current open positions for immediate fill: Heavy Equipment Operator: - Heavy Equipment Operators, with at-least (4) years equipment operating experience and (6) years trade experience, with the ability to operate: Backhoes, Excavators, Loaders, Water trucks, Motorgraders, Skidsteers, etc. We need operators that are skilled in excavation for pipeline trenches. Hourly Pay- based upon experience. We are a non-union company with very little prevailing wage work. Hourly Pay- $35-$45. Applications for Foreman and Pipelayer will also be accepted and considered at this time. Our current workload is primarily within the LA and Ventura Counties. All employees must be able to provide their own transportation to and from our jobsites. A valid drivers license is required for employment. Applicants are expected to be available for immediate or hire within 1-2 weeks. Company DescriptionSubzero Excavating is an Underground Utilities contractor specializing in both Wet & Dry Underground Utilities that has expanded into Site and Structural Concrete.Subzero Excavating is an Underground Utilities contractor specializing in both Wet & Dry Underground Utilities that has expanded into Site and Structural Concrete.

Job DescriptionJob description Overview We are seeking a highly skilled and experienced Equipment Operator to join our team. The ideal candidate will be responsible for operating a variety of heavy equipment and machinery to support the construction, maintenance, and operations of our facilities and projects. This role requires a strong foundation in equipment operation, a keen eye for safety, and a commitment to meeting deadlines and project goals. Duties Excavations/trenching inside closed landfills for landfill gas collections and leachate systems is a plus. Must be flexible and willing to work overtime as needed. · Ensures equipment is in good working order, at all times. · Must possess skill, coordination, and awareness to operate heavy equipment in a safe manner with precision and efficiency. · Able to slope or bench an excavation. · Able to read and understand cut and fill stakes in order to align and position equipment appropriately. · Willingness to operate heavy equipment for long periods with continuous attention to detail and safety. · Observe and follow all applicable safety requirements. · Maintain consistent communication among field crew members by use of hand signals or radio to align and position heavy equipment properly. · Confirm necessary precautions have been taken to ensure no conflicts exist with both above and below-ground utilities. · All other duties as assigned by the Superintendent Skills A positive attitude and willingness to take direction. · Ability to communicate in English · Understanding proper safety procedures and recognizing hazards · Ability to understand Plans as they relate to trenching, excavation, and grading. · Knowledge of U.S.A. marks · Must be a team player and create a positive environment · Must be a self-starter and a go-getter · Ability to check grade and verify elevations using a laser, is a plus. · Ability to lead the day-to-day activities of a small crew, is a plus. · Must be flexible and willing to work overtime as needed, including weekends. License/Certification: • Driver's License (Preferred) Ability to Commute: • Oakland, CA (Required) Requirements Education/Training: · High School diploma or General Education Degree (GED) · Five (5) years of hands-on/demonstrated experience as a heavy equipment operator · 40-Hr HAZWOPER or current 8-Hr HAZWOPER Refresher Certification · Construction industry experience, preferred · Valid Driver's License and reliable transportation Job Types: Full-time, Contract Pay: $35.00 - $37.00 per hour Benefits: Benefits Industry Standard Benefits

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role From your very first day, you'll be hands-on with real spacecraft – leading integrated test campaigns, mastering the satellite bus, and working with world-class RE teams to validate system health. You'll then carry that experience into Mission Operations, where you'll command vehicles from the moment they leave the pad through the earliest moments in orbit. As we scale our fleet, you'll become an architect of on-orbit operations: designing the playbooks, tools, and systems needed to fly dozens, then hundreds, of satellites. This role is your chance to directly shape how we operate an entire space constellation. Responsibilities • Author test procedures (manual and automated) used to confirm spacecraft hardware and software flight worthiness, • Lead high-visibility integration campaigns for development and flight hardware, • Operate spacecraft (interpret telemetry, send commands) during system tests at the factory, test facilities, launch sites, and during pre-launch operations, • Serve as a key operator during on-orbit operations, responsible for real-time decision-making and coordination, • Interface with customers to scope testing performed on their payloads, based on expected functions and failure modes of interest, • Identify and elevate off-nominal conditions during test, and drive issues to resolution by engaging with the wider engineering team, • Clearly communicate status, needs, and risks to the entire K2 Space team (and payload providers) during high-intensity test operations, • Bachelor's degree in electrical, aerospace, mechanical, computer, or other relevant engineering discipline, • 1+ years of experience in an integration/test/automation engineering role (includes internships and design/build/compete extracurricular projects), • Competency with analog and digital circuits, sensors/instrumentation, and software, • Experience testing and troubleshooting spacecraft and their related components and systems, including subsystem checkouts and system acceptance testing, • Familiarity with mission operations concepts such as LEOP, telemetry, commanding, fault protection, and anomaly resolution, • Experience working in a clean room and with ESD-sensitive equipment, • Experience operating vehicles in a mission or production setting, • Hands-on experience with HITL or Flatsat software verification testbeds, • Proficient in Python and/or Rust, • Experience with Linux systems, • Base salary range for this role is $100,000 - $150,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionCompany Description At Konecranes, we believe that great customer experience is built on the people behind the Konecranes name. Everything we do, we do with passion and drive. We believe diversity drives business success and is the foundation for our growth. We welcome different backgrounds and skills that enrich our community, and we promote a place where we can ALL be ourselves. This is what makes Konecranes a unique place to work. Job Description POSITION TITLE: INSPECTOR, CALOSHA REPORTS TO: SERVICE MANAGER PRINCIPAL RESPONSIBILITIES: Inspectors are required to be certified to perform compliance inspections and/or preventive maintenance products that incorporate compliance inspections in accordance with Title 8 of the California Code of Regulations. • All applicants must possess knowledge of sections 4884, et. seq. of Title 8 of the California Code of Regulations, as well as ANSI (American National Standards Institute) and SAE (Society of Automotive Engineers) standards, relating to the design and operation of cranes and derricks, including those specifically applicable to the types of cranes for which a license will be issued., • To be approved the surveyor must possess knowledge and experience with the specific equipment subject to the license and demonstrate at least five years of related experience as set forth in subsection (a)(2) above. Such surveyors will be approved by the Division to perform certification services only under the authority and supervision of the person issued a license pursuant to this article. Approval of a surveyor pursuant to this subsection does not constitute authorization to engage in certification activities outside the authority of the license., • Complete the schedule of monthly inspections and preventative maintenance, ensuring the schedule is completed or alternative arrangements are made., • Understand sold work hours and perform inspections within the allowed hours without compromising safety or quality. Communicate exceptions to supervisor, as soon as possible., • Perform inspection of equipment in accordance with established guidelines. Document findings and make corrective recommendations to the customer for inspected equipment including a written “Safety Notification” of any observed or known safety concerns, if appropriate. Determine customer’s intentions to purchase repairs and advise local service office of actions necessary to sell or complete the repairs., • Consult with customer regarding all repair and safety related issues and discuss during the VISIT REVIEW recommendations that will assist the customer with improving their SAFETY & PRODUCTIVITY, prior to leaving job site. Determine items requiring quotation., • Complete and provide proper electronic documentation utilizing the established company digital tools required for each service, obtaining the customer’s signature and acceptance., • Provide all required information and data for quotation including Master data and COMPONENTE level information, hours and number of Field Operatives required for repair when FAULTS are identified, complete list of tools and equipment required and other pertinent notes to assist with the quotation process., • Read, understand and apply the contents of all OSHA, ANSI, CMAA, HMI and other codes or regulations pertaining to our industry. Refresh and update knowledge periodically. Maintain copy of “Inspector’s Course” to be available for report completion at customer site., • Complete inspection reports and other required and appropriate documents in a professional, accurate, neat and legible manner and submit same in a timely manner and in accordance with established guidelines. Review job with Service Manager, discussing repair issues and customer feedback received during the inspection review., • Maintain regular communication with the service office and Service Supervisor, in accordance with established practices., • Coordinate work schedule with Service Supervisor. Perform service/repair work, as required and as scheduling permits., • Maintain all company issued equipment, vehicle and assets in a safe and proper working order. Operate tools, equipment and vehicles in a safe and responsible manner. Notify supervisor of any deficiencies for resolution., • Maintain supply of forms, literature, inventory and miscellaneous materials in the service vehicle. Document use or sale to customer, as required., • Follow all established safety rules and procedures, including those established by the customer., • Maintain company vehicle and uniforms in a clean and presentable manner., • Participate in monthly safety meetings. EDUCATION: Associate’s degree in Industrial Electrical/Mechanical Technology or related field or equivalent vocational/technical training and experience is preferred. EXPERIENCE: In addition, all applicants must demonstrate at least five years related experience with cranes or derricks. This five year of experience must include not less than two years of crane related field duties such as crane inspection as a crane operator, heavy equipment mechanic, shop foreman, operations supervision, rigging specialist, or mechanical or civil engineer. Related education may be substituted for experience at a ratio of two years of education for one year of experience up to three years. Inspection personnel must also meet the definition of a qualified person which is defined as: Qualified Person, Attendant or Operator. A person designated by the employer who by reason of his training and experience has demonstrated his ability to safely perform his duties and, where required, is properly licensed in accordance with federal, state, or local laws and regulations. OTHER REQUIREMENTS: Must have and maintain a good driving record, including a valid driver’s license. Must be willing and able to work off the ground. Must possess good written and verbal communication skills. Must be able to work varied overtime, as required by customer and be available for “on call” as part of the service office rotation (if required in specific location). Must be able to travel and work out of town, on occasion. Must be able to frequently lift up to 25 lbs. Must be able to lift up to 50 lbs. on a daily basis. Must be able to lift up to 75 lbs. although not on a daily basis. Must be able to lift 100 lbs. on a rare basis. This position requires frequent climbing, balancing, stooping/crouching, and overhead reaching. This position requires occasional pushing, pulling, kneeling, and crawling. This position will be inside approximately 90% of the time and outside approximately 10% of the time. This position will be frequently exposed to heat, cold, noise and heights. Payrate: $38.00 - $48.00 per hour. Additional Information What we offer: Salary: $38- $48 an hour - Pay is determined based on skills, geographic location, internal equity, market/data analysis, number of years of prior relevant experience, degrees and/or certifications, technical assessment score, etc. Company Vehicle: Our Service Technicians get a work truck and a gas card to be used for business purposes. Candidates must pass a Motor Vehicle Record (MVR) check. Benefits: Medical Plan, Dental, Vision, 401k plan with a match from day one, identity theft protection, accident insurance, travel insurance and so much more! Vacation: 2 weeks of vacation per year (pro-rated for the first year depending on start date). 5-12 years of service, 3 weeks. 13+ years of service, 4 weeks. Sick Leave: 5 days of Sick Leave per year. Pro-rated the first year after 90 days of service Holidays: 10 paid holidays per year Konecranes moves what matters. Konecranes is a global leader in material handling solutions, serving a broad range of customers across multiple industries. We consistently set the industry benchmark, from everyday improvements to the breakthroughs at moments that matter most, because we know we can always find a safer, more productive and sustainable way. That's why, with 16 000+ professionals in over 50 countries, we are trusted every day to lift, handle and move what the world needs. Konecranes is committed to ensuring that all employees and job applicants are treated fairly in an environment which is free from any form of discrimination. We are an Equal Opportunity Employer - Minorities/Women/Protected Veterans/Disabled/Other Protected Category. Konecranes, Inc. and its affiliates will not accept resumes from external recruiters or agencies without a Service Agreement and Agency Portal submission. Any resumes sent without a Service Agreement and Agency Portal submission with Konecranes, Inc. are void of any fees and free for internal use. Applicable Konecranes data protection obligations are the responsibility of the agency.

Job DescriptionCompany Description At Konecranes, we believe that great customer experience is built on the people behind the Konecranes name. Everything we do, we do with passion and drive. We believe diversity drives business success and is the foundation for our growth. We welcome different backgrounds and skills that enrich our community, and we promote a place where we can ALL be ourselves. This is what makes Konecranes a unique place to work. Job Description POSITION TITLE: INSPECTOR, CALOSHA REPORTS TO: SERVICE MANAGER PRINCIPAL RESPONSIBILITIES: Inspectors are required to be certified to perform compliance inspections and/or preventive maintenance products that incorporate compliance inspections in accordance with Title 8 of the California Code of Regulations. • All applicants must possess knowledge of sections 4884, et. seq. of Title 8 of the California Code of Regulations, as well as ANSI (American National Standards Institute) and SAE (Society of Automotive Engineers) standards, relating to the design and operation of cranes and derricks, including those specifically applicable to the types of cranes for which a license will be issued., • To be approved the surveyor must possess knowledge and experience with the specific equipment subject to the license and demonstrate at least five years of related experience as set forth in subsection (a)(2) above. Such surveyors will be approved by the Division to perform certification services only under the authority and supervision of the person issued a license pursuant to this article. Approval of a surveyor pursuant to this subsection does not constitute authorization to engage in certification activities outside the authority of the license., • Complete the schedule of monthly inspections and preventative maintenance, ensuring the schedule is completed or alternative arrangements are made., • Understand sold work hours and perform inspections within the allowed hours without compromising safety or quality. Communicate exceptions to supervisor, as soon as possible., • Perform inspection of equipment in accordance with established guidelines. Document findings and make corrective recommendations to the customer for inspected equipment including a written “Safety Notification” of any observed or known safety concerns, if appropriate. Determine customer’s intentions to purchase repairs and advise local service office of actions necessary to sell or complete the repairs., • Consult with customer regarding all repair and safety related issues and discuss during the VISIT REVIEW recommendations that will assist the customer with improving their SAFETY & PRODUCTIVITY, prior to leaving job site. Determine items requiring quotation., • Complete and provide proper electronic documentation utilizing the established company digital tools required for each service, obtaining the customer’s signature and acceptance., • Provide all required information and data for quotation including Master data and COMPONENTE level information, hours and number of Field Operatives required for repair when FAULTS are identified, complete list of tools and equipment required and other pertinent notes to assist with the quotation process., • Read, understand and apply the contents of all OSHA, ANSI, CMAA, HMI and other codes or regulations pertaining to our industry. Refresh and update knowledge periodically. Maintain copy of “Inspector’s Course” to be available for report completion at customer site., • Complete inspection reports and other required and appropriate documents in a professional, accurate, neat and legible manner and submit same in a timely manner and in accordance with established guidelines. Review job with Service Manager, discussing repair issues and customer feedback received during the inspection review., • Maintain regular communication with the service office and Service Supervisor, in accordance with established practices., • Coordinate work schedule with Service Supervisor. Perform service/repair work, as required and as scheduling permits., • Maintain all company issued equipment, vehicle and assets in a safe and proper working order. Operate tools, equipment and vehicles in a safe and responsible manner. Notify supervisor of any deficiencies for resolution., • Maintain supply of forms, literature, inventory and miscellaneous materials in the service vehicle. Document use or sale to customer, as required., • Follow all established safety rules and procedures, including those established by the customer., • Maintain company vehicle and uniforms in a clean and presentable manner., • Participate in monthly safety meetings. EDUCATION: Associate’s degree in Industrial Electrical/Mechanical Technology or related field or equivalent vocational/technical training and experience is preferred. EXPERIENCE: In addition, all applicants must demonstrate at least five years related experience with cranes or derricks. This five year of experience must include not less than two years of crane related field duties such as crane inspection as a crane operator, heavy equipment mechanic, shop foreman, operations supervision, rigging specialist, or mechanical or civil engineer. Related education may be substituted for experience at a ratio of two years of education for one year of experience up to three years. Inspection personnel must also meet the definition of a qualified person which is defined as: Qualified Person, Attendant or Operator. A person designated by the employer who by reason of his training and experience has demonstrated his ability to safely perform his duties and, where required, is properly licensed in accordance with federal, state, or local laws and regulations. OTHER REQUIREMENTS: Must have and maintain a good driving record, including a valid driver’s license. Must be willing and able to work off the ground. Must possess good written and verbal communication skills. Must be able to work varied overtime, as required by customer and be available for “on call” as part of the service office rotation (if required in specific location). Must be able to travel and work out of town, on occasion. Must be able to frequently lift up to 25 lbs. Must be able to lift up to 50 lbs. on a daily basis. Must be able to lift up to 75 lbs. although not on a daily basis. Must be able to lift 100 lbs. on a rare basis. This position requires frequent climbing, balancing, stooping/crouching, and overhead reaching. This position requires occasional pushing, pulling, kneeling, and crawling. This position will be inside approximately 90% of the time and outside approximately 10% of the time. This position will be frequently exposed to heat, cold, noise and heights. Payrate: $38.00 - $48.00 per hour. *KCN Additional Information What we offer: Salary: $38- $48 an hour - Pay is determined based on skills, geographic location, internal equity, market/data analysis, number of years of prior relevant experience, degrees and/or certifications, technical assessment score, etc. Company Vehicle: Our Service Technicians get a work truck and a gas card to be used for business purposes. Candidates must pass a Motor Vehicle Record (MVR) check. Benefits: Medical Plan, Dental, Vision, 401k plan with a match from day one, identity theft protection, accident insurance, travel insurance and so much more! Vacation: 2 weeks of vacation per year (pro-rated for the first year depending on start date). 5-12 years of service, 3 weeks. 13+ years of service, 4 weeks. Sick Leave: 5 days of Sick Leave per year. Pro-rated the first year after 90 days of service Holidays: 10 paid holidays per year Konecranes moves what matters. Konecranes is a global leader in material handling solutions, serving a broad range of customers across multiple industries. We consistently set the industry benchmark, from everyday improvements to the breakthroughs at moments that matter most, because we know we can always find a safer, more productive and sustainable way. That's why, with 16 000+ professionals in over 50 countries, we are trusted every day to lift, handle and move what the world needs. Konecranes is committed to ensuring that all employees and job applicants are treated fairly in an environment which is free from any form of discrimination. We are an Equal Opportunity Employer - Minorities/Women/Protected Veterans/Disabled/Other Protected Category. Konecranes, Inc. and its affiliates will not accept resumes from external recruiters or agencies without a Service Agreement and Agency Portal submission. Any resumes sent without a Service Agreement and Agency Portal submission with Konecranes, Inc. are void of any fees and free for internal use. Applicable Konecranes data protection obligations are the responsibility of the agency.

Job Description M.S. Aerospace Inc. (MSA) is an aerospace manufacturer of high strength specialty fasteners, including bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government, including the ISS, Space Shuttle and the most demanding defense equipment. We also support the most demanding OEMs in the commercial aviation industry. We offer a competitive benefits package including medical, dental, vision, and a monthly bonus. Join one of the fastest-growing aerospace companies by applying now! Cold Heading Operator Department: SHOP Department/ Area: Cold Heading Position Summary: Candidates are required to run batches of high strength bolts at a constant heated temperature of 1000°ree;-1100°ree; to create a head on the bolt. Ability to go through the three progressive stations to complete the end product. Experience with materials such as inconel, titanium, 8740, and 4340 preferred. National #89 or Okuma 2 dies 3 blows preferred. Minimum Qualifications: High school diploma or equivalent. Basic math skills and English reading skills. Lifting up to 25 lbs and moving 40 lbs pans with dollies. Simple blue print reading and ability to use precision measuring tools (comparators and gages) a plus. Reporting Relationships: Report to the Cold Heading supervisor Working Conditions: All day standing, repetitive manual motion, heavy physical work. Standing most of the time. Candidate will be working on a powerful cold header machine to run batches of high strength bolts at a constant heated temperature of 1000°ree;-1100°ree; Success Factors: Willingness to learn and teach, attention to details, ability to work in a group and to memorize simple procedures for machining and checking. Bi-lingual is preferred. Good communication skills a plus Position type: Requires full work time only. 8 hours a shift- Monday to Friday - overtime expected depending on production needs. Regular attendance is an essential job function. This job description in no way states or implies that these are the only duties to be performed by this employee. He or she will be required to follow any other instructions and to perform any other duties requested by his or her supervisor. M.S. Aerospace Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. M.S. Aerospace Inc. will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of Los Angeles Municipal Code, Chapter XVIII, Article 9. M.S. Aerospace Inc. 13928 Balboa Blvd Sylmar, CA 91342. Company DescriptionMSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications. M.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA: Materials Engineer Evaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices. Will accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field. 40 hours/week; $99,278.00 - $105,000.00/year Apply on-line w/ ref# at: Reference Number: HS-MSA EEO employer: including race, gender, disability & veteran status. We offer Medical, Dental, Vision, and 401K benefits.MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications.\r\n\r\nM.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA:\r\n\r\nMaterials Engineer\r\n\r\nEvaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices.\r\n\r\nWill accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field.\r\n\r\n40 hours/week; $99,278.00 - $105,000.00/year\r\n\r\nApply on-line w/ ref# at:\r\n Number: HS-MSA\r\nEEO employer: including race, gender, disability & veteran status.\r\n\r\n\r\n\r\nWe offer Medical, Dental, Vision, and 401K benefits.

Description: American Equipment Holdings is an organization of leading overhead crane and hoist fabricators, distributors and field service providers, including American Equipment, Allied Crane, Eastern Crane & Hoist, Facilities Engineering, Kistler Crane & Hoist, Pacific Crane & Hoist, Patriot Crane & Hoist, Shannahan Crane & Hoist, and Washington Crane & Hoist. The consolidated entity is one of the largest independently owned overhead crane and hoist solutions providers in the country, serving over 4,000 customers nationwide. Together, American Equipment Holdings companies provide comprehensive solutions for everything related to customers’ overhead crane and hoist needs, including OSHA mandated inspections, preventative maintenance and repair field services, parts, engineering, ISO certified fabrication, new and replacement equipment, automated systems, system modernizations and training. We are looking for a Field Maintenance Install Technician ( Experienced Ironworker) in our Anaheim location. Essential Duties and Responsibilities: • Work as part of team to install equipment. With a focus on safety and customer service., • Accurately and neatly document work performed using a combination of electronic forms, software applications, and traditional handwritten reports where required., • Maintain a clean and safe work environment., • Iron work/steel erection experience., • Aptitude for either electrical or mechanical environments as well as familiarity with mechanical and electrical equipment, • Comfort with working at heights, • Welding experience- Wire Feed (MIG), Stick (SMAW), • Hands-on electro-mechanical maintenance or equivalent military experience a plus, • Competence in equipment operation. Reach forklifts, scissor lifts., • Ability to read blueprints and schematics, • Ability to work well in a team environment., • Strong communication skills, • Proven commitment to safety, • Passion for doing things right the first time., • Industry certifications including equipment operator, Welding, Rigging will be a plus., • Willingness to work overtime is required, • Possession of a valid driver’s license with good driving record American Equipment Holdings represents the industry’s leading manufacturers such as Detroit Hoist, Columbus McKinnon, ACCO, R&M, Demag, Gorbel, Spanco, IMS, Harrington, Conductix, Magnetek & PE, among others and customers rely on its design, engineering, fabrication and installation capabilities to meet their unique application needs. American Equipment Holdings serves local, regional and national customers across a variety of end markets, including light & heavy industrial, automotive, mining, public utilities, military, aerospace & defense and energy, among others. For more information, visit . Proof of right to lawfully work in the United States required. We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. Requirements: Compensation details: 24-32 Hourly Wage PIe567ec12cd49-37820-39046823

Job DescriptionJob SummaryWe are seeking a full-time Forklift Operator to join our team in Compton, CA. In this role, you will transport packages and materials throughout the facility. This position requires a dedication to safety and careful driving practices. Ultimately, the goal of this position is to maximize efficiency by ensuring that materials and products are always in the right location at the right time. The ideal candidate has a proven track record as a Forklift Operator and an excellent safety record. Xchange Logistics Corporation is a global freight forwarding company that manages ocean & air import & exports, customs clearance and delivery, and warehouse logistics. Work Schedule: Monday- Friday (13:00 - 21:30) Pay: $20 / hour Benefits: 401k, Health, Dental, Vision, and Life Insurance Responsibilities • Unload products from incoming trucks and relocate them to the appropriate places, • Move pallets and crates from one location to another, • Monitor products for damages, shortages, or quality control issues and report on those issues, • Perform regular inspections and maintenance of machinery to ensure optimal operation, • Maintain accurate inventory records and activity logs, • Adhere to all health and safety regulations, legal guidelines, and company policies, • Assist in maintaining a safe and organized work environmentQualifications, • Previous experience as a Forklift Operator is preferred, • Valid forklift certification, • Attention to detail, • Familiarity with and ability to use industrial equipment, • Ability to meet the physical demands of the job, including lifting heavy objects, • Excellent hand-eye coordination

Job Description Company Overview: NRS is a leading provider of transportation & supply chain solutions. As a family-owned and operated company, NRS has delivered smart logistics solutions to numerous Fortune 500 companies spanning over 70 years. Whether it’s NRT, Keystone, Keystone Fresh, or Keystone Capacity, our innovative energy drives us towards new and valuable solutions for our clients, even as we continuously grow and strengthen our network. We are dedicated to creating a culture that empowers the individual and offers our associates the opportunity to apply their unique skill to the challenges facing our clients. In the office, the warehouse, or on the road, it is this commitment to our innovative spirit that unites us in common mission to push boundaries in the logistics industry. Join our team at NRS, Inc. and contribute to our mission of providing exceptional transportation and logistics services. We offer a competitive salary and benefits package, and we are committed to providing our employees with a positive work environment and opportunities for growth and development. Apply now and be a part of our success story! Job Overview: The Forklift Operator (Clamp, Reach Truck, Stand-Up Pallet Jack, Cherry Picker) is crucial for maintaining the cleanliness and organization of our production area while handling the movement of products with precision and care. The ideal candidate will be responsible for operating forklift trucks and other material handling equipment to load, unload, transport, and store goods within our warehouse and distribution centers. Duties and responsibilities: • Load and unload products from trailers using forklift trucks and other material handling equipment., • Store the products in proper places in warehouse., • Transport products to and from warehouse and distribution centers., • Deliver products to various units in safely and timely manner., • Sort, pack, wrap, tie and label products as per company procedures., • Monitor and maintain accurate inventory., • Clean work area and equipment regularly by removing empty pallets, wood and plastic., • Follow company standards and legal regulations to ensure safe and positive work atmosphere., • Performs routine pre and post inspections. Recommends repairs., • Study production schedule to determine material requirements, movements and deliveries., • Identify and report faulty equipment, damages, and safety concerns to Supervisor immediately., • A high school diploma or equivalent, providing a solid foundation for understanding warehouse operations and safety practices., • Valid forklift license, demonstrating formal training and certification in forklift operation., • 1-2 years of experience in forklift operation, showcasing proficiency and operational knowledge., • Demonstrated ability to skillfully maneuver forklifts in various configurations, ensuring the safe handling of goods., • Capable of performing both light and heavy lifting tasks, reflecting physical capability and endurance., • Familiarity with the maintenance requirements of forklifts and related equipment, emphasizing a proactive approach to equipment care., • Comprehensive knowledge of safety precautions necessary for safe forklift operation, minimizing risk to personnel and products., • Operating Machinery: Regular operation of forklifts and other material handling equipment., • Sitting and Maneuvering: Extended periods of sitting while navigating and operating the forklift within tight spaces., • Attention to Safety: Constant vigilance and adherence to safety protocols to prevent accidents and ensure safe operation., • Lifting and Stacking: Manual lifting and stacking of materials when necessary, occasionally handling loads of up to 50 pounds., • Visual and Auditory Awareness: High level of situational awareness required, with the need to quickly identify hazards and signals., • Flexibility and Coordination: Bending, reaching, and coordinating movements for loading and unloading materials. NRS is an equal opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. #NRSIND

Job Description Vesta Home is a leader in luxury interior design and furniture staging, serving prestigious markets such as Los Angeles, San Francisco, Florida, and New York. Our team is dedicated to creating iconic spaces that enhance the sale of properties by effectively merging style with functionality. As a Forklift Operator specializing in Cherry Picker equipment, you will play a vital role in optimizing our warehouse operations and contributing to the seamless flow of inventory. You will ensure that all products are handled safely and efficiently while maintaining the organization of our warehouse. Responsibilities: • Operate Cherry Picker forklifts and other material handling equipment safely and efficiently., • Load and unload materials from delivery trucks and shelving., • Accurately move inventory throughout the warehouse using a scanning system., • Conduct regular inventory checks to maintain accurate stock levels., • Assist with organizing and labeling products in accordance with warehouse standards., • Follow all safety protocols and guidelines to ensure a safe working environment. Requirements Qualifications: • High school diploma or equivalent., • Must possess a valid Forklift Operator certification, with a focus on Cherry Picker operation., • Proven experience of 3-5 years operating forklifts in a warehouse environment., • Strong attention to detail and ability to work effectively in a team. PTO 401k Medical Insurance Dental Insurance Vision Insurance

Job DescriptionETIC is an established and growing environmental consulting and construction company with offices throughout California. We are a customer-focused company offering solutions to complex construction and environmental issues. We provide a broad range of services to public and private sector clients. We offer competitive benefits and take pride in the quality of our work. ETIC is always looking to strengthen our construction team with professional, safe, talented and self-motivated individuals. We are growing in both Northern and Southern California and will be hiring skilled heavy equipment operators to meet our expanding client base’s needs. We will be hiring hourly FT, PT, and Contract Construction Heavy Equipment Operators - TBD based on needs. Essential Duties and Responsibilities: • Safely and efficiently operating small/midsize/large heavy equipment such as excavators, bulldozers, backhoes, skip loaders, forklifts, mechanized trenchers, etc., for various construction projects involving demolition, earthwork, and underground utilities., • Performing pre- and post-operation inspections of heavy equipment in accordance with standard safety and company policy measures., • Monitoring and maintaining equipment, as needed throughout operation, to ensure proper performance and safety and to avoid down time., • Working closely with and under the direction of a crew lead/foreman/superintendent., • Performing general labor tasks, as needed, to support projects when operating heavy equipment is halted., • Ensuring that all field procedures and safety protocols are followed in compliance with company- and client-specific requirements., • Reporting to job sites as directed. Travel and work at remote locations requiring out-of-town stays for periods of a few days to several weeks at a time may be required.Minimum Qualifications and Requirements:, • 5+ years of verifiable heavy equipment operating experience. Pay commensurate with knowledge, capabilities, and experience and skills on various types of equipment., • General equipment maintenance and repair knowledge required to assess and address malfunctions., • Sound decision-making and problem-solving skills., • Effective verbal communication and comprehension skills., • Consistent professionalism and positivity., • Ability and willingness to work effectively in a team environment., • Valid California Driver’s License with a clean driving record., • Ability to pass pre-employment and annual physicals, including alcohol/drug screening., • High school diploma or equivalent., • Insurance:, • Medical (HMO/PPO), • Dental PPO, • Vision, • Life, • Long Term Disability, • Flexible Spending Accounts, • 401(k), • Employee Assistance Program, • 8 paid holidays in addition to vacation timeHourly range: $30.25 - $42.30 Click Apply above to begin the process of joining our team! Notice to California Applicants: ETIC collects personal information in connection with your application for employment in accordance with the California Consumer Privacy Act (CCPA) and California Privacy Rights Act (CPRA). This information is used for employment-related purposes only. For more details, please refer to the “Notice to Applicants/Employees” available on ETIC Central under the Administrative Guides icon in the Labor Law Posters & Legal Notices folder. Powered by JazzHR jXwbbDnaIW

Job Description M.S. Aerospace Inc. (MSA) is an aerospace manufacturer of high strength specialty fasteners, including bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government, including the ISS, Space Shuttle and the most demanding defense equipment. We also support the most demanding OEMs in the commercial aviation industry. We offer a competitive benefits package including medical, dental, vision, and a monthly bonus. Join one of the fastest-growing aerospace companies by applying now ! Grinding Operator 2nd Shift Department/ Area: Grind Position Summary: Candidates will be responsible to set-up and operate #2 size CINCINNATTI centerless grinding machine – run small batch of blanks on machine and coach trainees. · Purpose: To prepare forged blank bolts into close tolerance machined parts ready for thread rolling, machine parts per process sketch following established procedures. Essential Functions: Install grinding and feed wheels on machine, position accessory tooling, balance, dress and adjust grinding wheel, using dresser with or without cams. Operate the machine. Visually and dimensionally check samples. Enter production and quality data in computer reporting system. Coaches a trainee and monitors quality for both. · Daily tasks: Maintain work area organized with required tools, inspection gages and instructions. Monitor production data and report at end of task or shift. Weigh count piece production. Participate in required training classes. Minimum Qualifications: • High School Diploma, • Working Knowledge of machines and tools Working Conditions: All day standing, repetitive manual motion, heavy physical work at time of some set-up. Success Factors: Willingness to learn and teach, attention to details, ability to work in a group and to memorize simple procedures for machining and checking. Bi-lingual is preferred. Position type: Schedule: • 2nd shift (02:30 PM to 11PM), • 8 hour shift This job description in no way states or implies that these are the only duties to be performed by this employee. He or she will be required to follow any other instructions and to perform any other duties requested by his or her supervisor. M.S. Aerospace Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. M.S. Aerospace Inc. will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of Los Angeles Municipal Code, Chapter XVIII, Article 9. M.S. Aerospace Inc. 13928 Balboa Blvd Sylmar, CA 91342. Company DescriptionMSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications. M.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA: Materials Engineer Evaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices. Will accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field. 40 hours/week; $99,278.00 - $105,000.00/year Apply on-line w/ ref# at: Reference Number: HS-MSA EEO employer: including race, gender, disability & veteran status. We offer Medical, Dental, Vision, and 401K benefits.MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications.\r\n\r\nM.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA:\r\n\r\nMaterials Engineer\r\n\r\nEvaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices.\r\n\r\nWill accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field.\r\n\r\n40 hours/week; $99,278.00 - $105,000.00/year\r\n\r\nApply on-line w/ ref# at:\r\n Number: HS-MSA\r\nEEO employer: including race, gender, disability & veteran status.\r\n\r\n\r\n\r\nWe offer Medical, Dental, Vision, and 401K benefits.

Job Description Job Description: Position Overview The Machine Operator - Grinder is responsible for setting up, operating, and maintaining grinding machinery to produce high-quality parts according to specified measurements and tolerances. This role involves monitoring the production process, performing inspections, and ensuring adherence to safety and quality standards. Key Responsibilities • Machine Operation:, • Set up and operate grinders, including surface, cylindrical, or centerless grinders., • Adjust machine settings, such as speeds, feeds, and tooling, to achieve the desired results., • Quality Assurance:, • Measure and inspect finished parts using precision tools (e.g., micrometers, calipers, and gauges) to ensure compliance with blueprints and specifications., • Identify and address any quality issues during the grinding process., • Machine Maintenance:, • Perform routine maintenance and cleaning of grinding equipment to ensure optimal performance., • Report any mechanical or technical issues to the maintenance team., • Production Monitoring:, • Read and interpret work orders, blueprints, and technical drawings., • Monitor grinding processes to maintain efficiency and minimize downtime., • Safety Compliance:, • Follow safety protocols and wear appropriate personal protective equipment (PPE)., • Maintain a clean and organized work area to reduce hazards., • Collaboration:, • Work closely with the production team, quality control personnel, and supervisors to meet production goals., • Experience:, • Previous experience as a grinder operator or similar role in a manufacturing environment., • Familiarity with different types of grinders (surface, cylindrical, centerless, etc.)., • Technical Skills:, • Proficiency in reading blueprints and technical specifications., • Strong knowledge of grinding techniques and tool setups., • Ability to use precision measuring instruments., • Physical Requirements:, • Ability to lift heavy materials (up to 50 lbs) and stand for extended periods., • Good hand-eye coordination and manual dexterity., • Other Skills:, • Strong attention to detail and problem-solving skills. Job Type: Full-Time Schedule: 2nd Shift - 3:30pm - 12:00 pm (M-F) Salary: $22.00 Benefits: Health Insurance, Vision Insurance and Life Insurance Job Type: Full-time Pay: From $22.00 per hour Benefits: • Dental insurance, • Health insurance, • Life insurance, • Vision insurance Schedule: • 8 hour shift Education: • High school or equivalent (Preferred) Experience: • Manufacturing: 1 year (Preferred) Work Location: In person Company DescriptionLocally Owned, Locally Operated. FasTemps was founded in 1997 in Ypsilanti, Michigan by Karl O and Tim H. Clients immediately responded to their sincerity and genuine interest in understanding the needs of their clients. As a result of customer demand, FasTemps now offers the same excellent service across southern Michigan with offices in Jackson, Lansing, and Ypsilanti. In 2001, FasTemps was awarded the prestigious Strategic Supplier contract for staffing at the University of Michigan and the Health System. In 2005, FasTemps began operations in southern California, currently with offices in Upland and Los Angeles. The Outstanding Achievement Award for the Michigan area was given to FasTemps in 2012 by the Small Business Administration. Through their 20-year journey in the world of staffing, Tim and Karl have maintained an uncompromising commitment to the honest, sincere and genuine ideals which propelled their launch into business in 1997.Locally Owned, Locally Operated.\r\n\r\nFasTemps was founded in 1997 in Ypsilanti, Michigan by Karl O and Tim H. Clients immediately responded to their sincerity and genuine interest in understanding the needs of their clients. As a result of customer demand, FasTemps now offers the same excellent service across southern Michigan with offices in Jackson, Lansing, and Ypsilanti. In 2001, FasTemps was awarded the prestigious Strategic Supplier contract for staffing at the University of Michigan and the Health System. In 2005, FasTemps began operations in southern California, currently with offices in Upland and Los Angeles. The Outstanding Achievement Award for the Michigan area was given to FasTemps in 2012 by the Small Business Administration. Through their 20-year journey in the world of staffing, Tim and Karl have maintained an uncompromising commitment to the honest, sincere and genuine ideals which propelled their launch into business in 1997.

Job Description M.S. Aerospace Inc. (MSA) is an aerospace manufacturer of high strength specialty fasteners, including bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government, including the ISS, Space Shuttle and the most demanding defense equipment. We also support the most demanding OEMs in the commercial aviation industry. We offer a competitive benefits package including medical, dental, vision, and a monthly bonus. Join one of the fastest-growing aerospace companies by applying now ! Marking Machinist Operator Department: Marking Department/ Area: Shop Floor Position Summary: The candidate will be responsible for operating press for the purpose of impression of identification in fasteners manufactured for the aerospace industry under the tightest tolerances and quality requirements. After the training period, the candidate will be responsible for machine tooling and set-up. Daily tasks: Operate the marking press machines. Visually and dimensionally check samples. Enter production and quality data in computer reporting system. Maintain work area. Keep area clean and organized with required tools and inspection gages. Follow instructions and procedures. Monitor production data and report to supervisors. Weigh count piece production. Participate in training classes as needed and required. Minimum Qualifications: • High school diploma or equivalent, • Good communications skills Reports to Director of Manufacturing and Plant Manager Working Conditions: Repetitive manual motion, heavy physical work. Walking to monitor several machines. Lifting to 25 lbs and moving 40lb pans with dollies. Success Factors: • Ability to read a micrometer and caliper a plus, • Understand the marking operation a plus, • Bilingual a plus, • Simple blueprint reading and use of precision measuring tools, comparators and gages a plus Requires full work time only. 8 hours a shift- Monday to Friday - overtime expected depending on production needs. Regular attendance is an essential job function. This job description in no way states or implies that these are the only duties to be performed by this employee. He or she will be required to follow any other instructions and to perform any other duties requested by his or her supervisor. M.S. Aerospace Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. M.S. Aerospace Inc. will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of Los Angeles Municipal Code, Chapter XVIII, Article 9. M.S. Aerospace Inc. 13928 Balboa Blvd Sylmar, CA 91342. Company DescriptionMSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications. M.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA: Materials Engineer Evaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices. Will accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field. 40 hours/week; $99,278.00 - $105,000.00/year Apply on-line w/ ref# at: Reference Number: HS-MSA EEO employer: including race, gender, disability & veteran status. We offer Medical, Dental, Vision, and 401K benefits.MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications.\r\n\r\nM.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA:\r\n\r\nMaterials Engineer\r\n\r\nEvaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices.\r\n\r\nWill accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field.\r\n\r\n40 hours/week; $99,278.00 - $105,000.00/year\r\n\r\nApply on-line w/ ref# at:\r\n Number: HS-MSA\r\nEEO employer: including race, gender, disability & veteran status.\r\n\r\n\r\n\r\nWe offer Medical, Dental, Vision, and 401K benefits.

Job DescriptionCompany Description Company Description If you are looking for a collaborative sales team that arranges Cargo Charters for time-critical shipments, transportation of hazardous materials, heavy and oversized equipment, humanitarian and relief aid, then we have the perfect opportunity for you! WHO IS AIR CHARTER SERVICE Air Charter Service (ACS) is a leading aircraft charter company that provides passenger and cargo aircraft charters worldwide. To put it simply, we are the middle person between the clients and the operator. Our Sales Consultants manage the full travel/sales cycle so all our clients have to do is fly! Our clients consist of high-net-worth individuals, CEOs, celebrities, the rich and famous, and many more! With offices across the globe, including North America, South America, Europe, CIS, Africa, the Middle East, Asia, and Australasia, ACS offers personalized charter solutions using local knowledge. ACS is a rapidly growing company, generating over $1 billion in revenue and arranging more than 25,000 charter flights annually. Job Description A DAY IN THE LIFE • Developing and maintaining relationships with clients and team, • Grow a wide and effective network of contacts inside and outside organization, • Pro-actively targeting your list through outbound sales calls, emails, and visits, • Set and exceed goals with quality and precision, • Presents and undertakes public speaking with skill and confidence, • Demonstrate an expert understanding of the aircraft and chartering process, • Manage charter bookings from inquiry to completion, • Flight watching/overseeing flight departures 24/7, • Award-winning professional training and one-on-one mentoring, • International training based in our London HQ. Training and travel expenses are covered by us!, • Supportive balance between independent and team-oriented work, • Paid your base salary during training!, • 9 levels of career growth opportunities from Trainee Broker to DirectorQualifications HOW DO WE DEFINE SUCCESS • Confidence and strong phone etiquette, • Pro-active and self-starter, • High attention to detail, • Demonstrates good knowledge retention, • Teamplayer and coachable, • Meeting and exceeding sales goals, • Excellent written and verbal communication skills Additional Information WHAT IS IN IT FOR YOU • 9 levels of career growth opportunities from Trainee Broker to Director, • Job stability and leadership support for development, • Welcoming, collaborative environment with seasonal events and team night outings, • Base salary: $65,000K USD + 10% uncapped commission, • 20 days in PTO for each year plus paid sick time, • 12 paid public holidays, • Additional paid leave for your birthday, wedding, moving, holiday shopping and more!, • Affordable health, dental and vision insurance plans, • 401K retirement savings plan with generous employer match!, • Life insurance