Trabajos high school en Jacksonville, Florida - Page 4Crear alertas

Job Description Req ID: 467 Job Title: SME - TECH/OPERATOR II (V-22 Avionics) Location: Jacksonville, FL, US 32221 Job Type: Full-Time Education: High School Diploma / GED Travel: Up to 10% Job Requirements: Knowledge, Skills, and Abilities • Able to work in a team to accomplish common goals., • Must demonstrate the ability to take initiative and work independently., • Must assign tasks and report status if designated as a testing lead., • Possess good verbal and written English communication skills for training development and internal/external communications., • Must interact professionally with military, government, and foreign personnel using the proper courtesies while observing the correct customs., • Must be able to read, navigate, and interpret applicable technical manuals and engineering drawings., • Experienced with Microsoft Office software tools., • Consistently demonstrate interpersonal skills to accept assignments and communicate technical concepts in layman's terms., • Ability to analyze and interpret instructions and standards., • Ability to communicate effectively, both verbally and in writing., • High school diploma or GED equivalent., • Six (6) years of experience directly related to the area of expertise in the maintenance or operation of systems and subsystems for the project assigned., • Additional qualifications or experience as required by the Statement of Work., • Successful completion of an approved Military Instructor Training Program is desired but not required., • Familiarity with the V-22 Interactive Electronic Technical Manual (IETM)., • V-22 Aircrew qualification preferred., • CDI/CDQAR qualifications preferred., • Four years’ experience in training or curriculum development is desired. PI8035573b4203-25405-38822357

Job Description Req ID: 466 Job Title: CONTRACTS ADMINISTRATOR I Location: Jacksonville, FL, US 32201 Job Type: Full-Time Education: Associate Degree Travel: None Job Requirements: Knowledge, Skills, and Abilities • Must be able to analyze technical data in subcontractors' proposals., • Must be able to perform financial analysis., • Must have strong leadership, negotiation, communication, and interpersonal skills., • Knowledge of regulatory guidelines, particularly provisions of the FAR and DFARS., • Proficiency with business software programs and automated accounting systems., • Associate degree with business emphasis plus two (2) years general business experience, or high school diploma or equivalent plus four (4) years general business experience. PI800f33eaf13c-25405-38822356

Job Description Req ID: 464 Job Title: CONTRACTS ADMINISTRATOR II Location: Jacksonville, FL, US 32201 Job Type: Full-Time Education: Associate Degree Travel: None Job Requirements: Knowledge, Skills, and Abilities • Must be able to analyze technical data in subcontractors' proposals., • Must be able to perform financial analysis., • Must have strong leadership, negotiation, communication, and interpersonal skills., • Knowledge of regulatory guidelines, particularly provisions of the FAR and DFARS., • Proficiency with business software programs and automated accounting systems., • Must be capable of operating standard office equipment: printers, copiers, scanners, telephones, facsimile machines, and other required audio-visual equipment. Education and Experience • Associate's degree with business emphasis plus two (2) years general business experience, or high school diploma or equivalent plus four (4) years general business experience., • Two (2) years contract-related experience., • Deltek/Costpoint Experience a plus. PI76ac1ebee046-25405-38822355

American Medical Staffing is seeking a travel Home Health Physical Therapist for a travel job in Jacksonville, Florida. Job Description & Requirements • Specialty: Physical Therapist, • Discipline: Therapy, • Start Date: 10/27/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days Job Title: Physical Therapist: Home Health \n Location: City, State Setting: Home Health Pay Range: $XXXX-XXXX/weekly (or hourly) Schedule: 8-Hour Days (add/edit any additional shifts, if applicable) Contract Length: 13 Weeks Candidate Type: Local and traveler friendly, Local candidates only – travel stipend not available, Traveler friendly – travel reimbursement available (please pick 1) \n Requirements: \n\n • [YEARS] years of experience as a PT\n, • Qualified applicants MUST have at least [YEARS] years of experience in Home Health\n, • Valid Physical Therapist license\n, • Day-One Benefits: Medical, dental, and vision plans with no waiting period.\n, • Wellness PTO: Build 1 or 2 weeks of paid time off into your contract.\n, • Hotel Discounts: Save up to 60% on hotel bookings with access to 700,000+ discounted properties.\n, • Loyalty Program: Earn financial incentives automatically based on hours worked and assignment type.\n, • Referral Program: $500 for you and $500 for each referral after 450 hours—no limits\n, • Working Advantage: Access exclusive discounts on retail, entertainment, and travel.\n, • Scrub Discount: 20% off all scrubs through our customized AMS store.\n, • Retirement Plans: 401(k) options to help you plan for the future.\n, • Compliance & Credentialing Support: Let us handle the logistics so you can focus on patient care.\n, • One specific to the position that includes the [PROFESSION - ACRONYM] (such as RN)\n, • Deliver one-on-one, high-touch care to patients in their homes\n, • Conduct skilled nursing visits and perform assessments\n, • Create and manage individualized care plans\n, • Collaborate with families and interdisciplinary providers to improve patient outcomes\n\n \n Apply now to take the next step in your journey. \n American Medical Staffing is an Equal Employment Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, national origin, sexual orientation, gender identity, disability, age, or any other non-merit factor. American Medical Staffing Job ID #89265. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Physical Therapist:Home Health,07:00:00-15:00:00 About American Medical Staffing American Medical Staffing is a staffing agency headquartered in Baltimore, MD. Our goal is to CREATE an extraordinary experience for our health care professionals. Our roots are nurse owned and operated so we know what clinicians want - lots of options, a smooth and informed placement process, competitive and accurate pay, great customer service and responsiveness to requests, and advocacy when there is an issue. When AMS was founded in 2001, we started our company with a mission to be a better agency than our competitors. We have always put a heavy emphasis into what is best for our employees, not necessarily just our clients or our company. You are not an expense as you may be to a hospital; you are an asset. We take employee advocacy seriously; you are not just a number to us. The end result is that you don`t work for us; we work for you. Since starting in Baltimore, MD, we continue to grow throughout the country. Check out our industry leading reviews on Google and Indeed to see how much our clinicians enjoy working with us! · Benefits: AMS offers an array of benefits for any employee working 30 hours or more! Those eligible employees who choose to participate will pay the premiums with deductions from their pre-tax earnings. We offer a complete benefits package including Health Insurance, 401K with up to 2% match, Life, Vision, and Dental. From health and wellness support, financial or legal needs, or help with life's everyday challenges, our Employee Assistance Program provides you with resources, services and discounts to help you manage your unique concerns and save time, energy and money. We also offer additional Employee Perks that you can enjoy as an AMS employee: • Scrubin – Uniform Discounts, • Working Advantage – unlimited access to thousands of exclusive discounts and special offers nationwide for theme parks, shows, tours, attractions, sports, concerts, hotels, rental cars, retail gift cards, movie tickets and much more, • Hotel Engine - Save up to 60% when booking hotel rooms, with access to more than 700,000 deeply discounted hotels worldwide., • Discounted Pet Insurance, • Wellness Program, including fitness, nutrition and financial wellness, • Betterhelp - 1 month of free therapy, followed by a discounted rate for our Healthcare Professionals and their family members., • Win Win Referral Bonus - $500 for you, and $500 for them!Benefits, • 401k retirement plan, • Life insurance, • Medical benefits, • Dental benefits, • Vision benefits

Job Description Mistras Group is seeking full time and temporary API 510/570 Inspectors for our Jacksonville, FL location. The API Inspector will perform inspections on pressure vessel, piping, and/or above ground storage tank equipment for the purpose of certifying compliance and/or recommending and approving repairs in accordance with the following API standards: MAJOR RESPONSIBILITIES/ACTIVITIES: • Perform internal and external inspections on equipment at scheduled intervals to maintain the mechanical integrity of the fixed equipment of the refinery., • Perform visual inspection of completed work and recommend and approve repairs., • Assist in the scheduling of activities related to inspection., • Use of proper safety procedures and equipment., • Properly use and complete customer and company job related forms and paperwork., • Abide by Company policies and procedures., • Complete all required training, including tests, within Company guidelines., • Perform a variety of tasks, often changing assignments on short notice., • Prioritize and complete work assignments by specific deadlines., • Deliver reports to clients., • Work outdoors in a plant atmosphere., • Working in plant and/or shop areas around production machinery with extreme noise levels., • Wear required safety equipment., • Possess the related API certification (510, 570) with at least one year of related experience., • Requires high school diploma or equivalent, technical school or college credits preferred., • Must be proficient with MS Word and Excel and be able to write detailed inspection reports., • Must have the ability to lift and carry 35 pounds., • Capable of climbing, working at high elevations and working in confined spaces., • Must be able to walk and climb to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells., • Must have sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively;, • Must have sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to conduct investigations., • Must have sufficient manual dexterity, with or without reasonable accommodation, which permits the employee to perform routine office duties. #LI-KM1

Job Description Nova Data Testing is currently looking for hard working and dependable individuals for placement as Non-Destructive Testing Assistants to support our projects in the South East and the New England Regions. A great candidate has experience in a trade, and is willing to learn! Our company has been providing industry-leading inspection services for over 35 years, and we are looking for a skilled technician to join our team. The NDT Assistant will work with NDT Technicians in performing non-destructive tests, and evaluations for acceptance or rejection determinations. The NDT Assistants will receive both on the job and classroom training and development to further their career as an NDT Technician. While we always look for long term full-time employees, we can start with seasonal and lead to full-time employment. Already have documented NDT experience and Level I certifications? Please apply to our NDT Industrial Inspection Technician position. Nova Data provides both on the job and classroom training and development to further our employees’ careers as an NDT Technician. Please note: This application process should only take 5-10 minutes. Responsibilities • Assist Technicians setup and calibrate non-destructive testing (NDT) equipment, • Assist with performing non-destructive testing to ensure quality and detect defects; methods include: Visual Inspection, Ultrasound Testing, and Magnetic Particle Testing, • Record detailed inspection results, • Assist with maintaining equipment and handling records, • Maintain a safe working environment by following established process and protocol, • High School Diploma or equivalent required, • Technical training and/or experience in industrial settings preferred, • Microsoft Office experience (Word and/or Excel), • Strong work ethic and dependable, • Exceptional safety and quality awareness, • Ability to follow directions and procedures to maintain a safe working environment and produce quality results, • Exceptional attention to detail, • Ability to work well within team environments, • Flexibility with changing schedules, • Able to stand, walk, lift, bend, and kneel for prolonged periods of time - shifts can be upwards of 12 hours long, • Have good visual acuity, including near, distant, and color, • Able to wear a full-face respirator along with other PPE for extended periods of time, • Able to lift and carry objects that are 50 pounds, and up to 100 pounds on occasion, • Comfortable climbing and working off of ladders, stairs, and scaffolding, sometimes in excess of 100 feet, • Comfortable in confined spaces, • Work in environments in conditions of extreme heat and cold, • Starting Wage: $16-22 per hour (1.5X overtime), • Paid travel time and a daily stipend during travel, • Retirement saving plan (IRA), • Potential for bonus, • Professional Development Assistance

Job Description As a leader in the industry, Insituform Technologies LLC, an Azuria Water Solutions company, is a global company that has been providing pipeline protection services for more than 50 years. Insituform values employee development and empowerment and are looking for innovative individuals to join their team and contribute to maintaining critical infrastructure worldwide. We are currently seeking Construction Technicians - Laborers with valid CDL licenses to join our team in Jacksonville, FL. As a Construction Technician / Laborer, you will be responsible for the installation of cured-in-place pipe (CIPP) for various municipal, industrial, storm, and sewer line rehab and repair projects. This position requires working with minimal oversite while still adhering to instructions closely. We are currently offering a limited-time sign-on bonus of $4,000 for new hires with a valid CDL license, and sign-on bonuses for new hires without a current CDL license are also available at a reduced amount. New employees who meet the criteria outlined in our sign-on bonus program will be eligible for the full payout. The starting pay is at an hourly rate, and the average Construction Technician can expect to earn up to $55,000 per year in total (includes starting hourly rate, overtime, per diem). Why You’ll Love Working For Us: • Competitive salary, • Daily per diem while traveling, • 100% covered individual hotel room stays while traveling, • Full benefits package including medical, dental, vision, and prescription drug coverage, • 401k matching, • Tuition assistance, • Paid time off and overtime pay, • Company paid PPE, boots, and safety gear, • Career growth opportunities, • Work for a forward-thinking and innovative company, • Repair various types of sewer lines by using a specific product and process, • Ensure pull-in tube is properly prepared for installation by examining D-Rings, chains, and attachment to pulling cable, • Install the prepared tube using a winch, backhoe, crane, or other appropriate material, • Monitor gauges, dials, or other indicators to ensure equipment is working properly, • Cure resin products using an inflation tube, banding boots, layflat, boiler hose, etc., • Learn / train on Insituform’s products, processes, safety procedures, installation techniques, and equipment, • Drive various vehicles (pickup trucks to tractor-trailer rigs) to haul crews and equipment, • High School diploma or equivalent preferred, • Experience as a Construction Laborer and / or Installation Technician highly preferred, • OSHA certifications are a plus, • Valid driver’s license required with a clean motor vehicle report, • Must possess a Class A or B CDL and be aligned with Insituform’s motor vehicle standards (Hazmat endorsement is preferred but not required), • Must be able to wear a respirator and body harness while entering confined spaces, • Ability to lift / move up to 75 pounds and use pneumatic, battery-powered, or electric tools, • Comfortable working outside at job sites with moving vehicles and mechanical operations, with occasional exposure to fumes or airborne particles, • Must be able to travel weekly (potentially out of state) Azuria Water Solutions is an Equal Opportunity Employer. Equal opportunity is a sound and just concept to which Azuria Water Solutions is firmly bound. Azuria Water Solutions will not engage in discrimination against, or harassment of, any person employed or seeking employment with Azuria Water Solutions on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, non-disqualifying disability, status as a protected veteran or other characteristics protected by law. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. VEVRAA compliant – priority referral Protected Veterans requested.

Job DescriptionDescriptionIf you're a CEI Engineer in Training looking for stability and professional growth, or an experienced CEI Inspector who's ready for the next phase of your career - we'd love to hear from you. As a CEI Engineer in Training, you will be responsible for performing highly complex technical assignments in field surveying and construction layout, making and checking engineering computations, inspecting construction work, and conducting field tests. You will also be responsible for coordinating and managing the lower-level inspectors. *Work is performed under the general supervision of the Project Administrator. Your Primary Responsibilities will include • Daily documentation of contractor’s work efforts., • Project coordination with Contractor’s field personnel and utility owners., • Project field book preparation and documentation., • Density log book preparation and documentation., • Material sampling and testing., • Assisting with preparation of the Final Estimate package., • Measuring distances to verify accuracy of dimensions of construction activity/layout., • Verifying levels, alignment, and elevation of construction activity/installations., • Observing work in progress to ensure that procedures are followed and materials used conform to specifications., • Obtaining and preparing material samples for laboratory testing., • Examining workmanship of finished installations for conformity to standards and accepted installation., • Recording quantities of materials received or used during specified periods., • Maintaining a daily log of construction and inspection activities and comparing progress reports., • Must have EIT - Engineer In Training Certificate, • High School Graduate plus minimum of 4 years of DOT roadway and/or bridge construction experience., • Valid driver’s license with approved/acceptable driving history required., • CTQP Concrete Field Inspector Level I, • CTQP Concrete Transportation Construction Inspector (CTCI) Level II, • CTQP Asphalt Roadway Level I & II, • CTQP Earthwork Level I & II, • CTQP Pile Driving Inspection, • CTQP Drilled Shaft Inspection, • Intermediate MOT, • CTQP Final Estimates Level I, • Nuclear Radiation Safety, • Complete the Critical Structures Construction Issues, Self-Study Course, • Excellent compensation package, • Outstanding holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Mentorship Program, • Tuition Reimbursement, • Parental Leave, • Competitive health and dental insurance premiums, • Variety of voluntary benefit options, • Short-Term Disability/Long-Term Disability, • Company-furnished life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreDRMP is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. #LI-BM1

Job DescriptionSalary: Job Title: Contract Marine Construction Laborer Job Summary: The Marine Laborer plays a critical role in the construction and maintenance of marine and coastal infrastructure projects. This position involves performing various manual labor tasks to support the construction, repair, and maintenance of piers, docks, seawalls, and other marine structures. The ideal candidate will have experience in heavy civil construction, a strong work ethic, and the ability to work in challenging environments. The period of employment will start on October 1, 2024, and ends after 4 weeks. Although there could be an opportunity to gain full time employment, it would depend on the need of the company, as well as the skills of the personnel. The project will be with JEA and will be in Jacksonville, FL. The work schedule will be 7 days a week, 12 hours a day, and there will be both day and night shifts. Key Responsibilities: • Operate and maintain various types of construction equipment and tools, including but not limited to jackhammers, drills, saws, and concrete mixers., • Perform tasks such as concrete demolition and concrete forming., • Must have the ability to work in confined spaces, climb ladders, and work at heights with fall gear., • Load, unload, and transport construction materials and equipment to and from the worksite., • Follow all safety protocols and procedures to ensure a safe work environment for all team members., • Work collaboratively with other team members, including heavy equipment operators, excavators, welders, and commercial divers, to complete projects on time and within budget. Qualifications: • High school diploma or equivalent., • Minimum of 2 years of experience in heavy civil construction but not a requirement., • Ability to operate and maintain construction equipment and tools., • Strong understanding of construction techniques and best practices., • Physical stamina and strength to perform manual labor in various weather conditions., • Basic knowledge of safety regulations and practices in construction., • Must pass a background check., • Valid drivers license and reliable transportation., • Certifications in OSHA safety training and other relevant areas are a plus. Work Environment: • Work is performed outdoors in all weather conditions, including extreme heat, cold, and rain., • May be required to work at heights, in confined spaces, and on uneven terrain., • Regularly exposed to noise, dust, and other construction site hazards. Physical Requirements: • Ability to lift and carry heavy objects (up to 50 lbs.) frequently., • Ability to perform physically demanding tasks such as digging, lifting, and climbing., • Ability to stand, walk, and work on feet for extended periods. Equal Opportunity Employer. Employment opportunities are based on one's qualifications and capabilities to perform the essential functions of a particular job. All employment opportunities are provided without regard to race, religion, sex, pregnancy, childbirth, or related medical conditions, national origin, age, veteran status, disability, genetic information, or any other characteristic protected by law. This Equal Employment Opportunity policy governs all aspects of employment, including, but not limited to, recruitment, hiring, selection, job assignment, promotions, transfers, compensation, discipline, termination, layoff, access to benefits and training, and all other conditions and privileges of employment.

Job DescriptionDescriptionIf you're a CEI Senior Inspector looking for stability and professional growth, or an experienced CEI Inspector who's ready for the next phase of your career - we'd love to hear from you. As a CEI Senior Inspector, you will be responsible for performing highly complex technical assignments in field surveying and construction layout, making and checking engineering computations, inspecting construction work, and conducting field tests. You will also be responsible for coordinating and managing the lower-level inspectors. *Work is performed under the general supervision of the Project Administrator. Want to work on projects that matter? Let's show you what we're building. Construction Services | DRMP Culture, benefits, growth: Discover the DRMP Difference. Careers | DRMP Your Primary Responsibilities will include • Daily documentation of contractor’s work efforts., • Project coordination with Contractor’s field personnel and utility owners., • Project field book preparation and documentation., • Density log book preparation and documentation., • Material sampling and testing., • Assisting with preparation of the Final Estimate package., • Measuring distances to verify accuracy of dimensions of construction activity/layout., • Verifying levels, alignment, and elevation of construction activity/installations., • Observing work in progress to ensure that procedures are followed and materials used conform to specifications., • Obtaining and preparing material samples for laboratory testing., • Examining workmanship of finished installations for conformity to standards and accepted installation., • Recording quantities of materials received or used during specified periods., • Maintaining a daily log of construction and inspection activities and comparing progress reports., • High School Graduate plus minimum of 4 years of DOT roadway and/or bridge construction experience., • Valid driver’s license with approved/acceptable driving history required., • CTQP Concrete Field Inspector Level I, • CTQP Concrete Transportation Construction Inspector (CTCI) Level II, • CTQP Asphalt Roadway Level I & II, • CTQP Earthwork Level I & II, • CTQP Pile Driving Inspection, • CTQP Drilled Shaft Inspection, • Intermediate MOT, • CTQP Final Estimates Level I, • Nuclear Radiation Safety, • Complete the Critical Structures Construction Issues, Self-Study Course, • Excellent compensation package, • Outstanding holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Mentorship Program, • Tuition Reimbursement, • Parental Leave, • Competitive health and dental insurance premiums, • Variety of voluntary benefit options, • Short-Term Disability/Long-Term Disability, • Company-furnished life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreDRMP is a Drug and Alcohol Free workplace, an Equal Employment Opportunity employer and E-Verify employer. #LI-BM1

Job DescriptionDescription: Are you an experienced construction inspector looking to take the lead on impactful projects in North Florida? In this role, the CEI Senior Inspector will play a vital role in ensuring quality assurance on roadway projects. You’ll also provide field tests, make and check engineering computations, and guide inspection teams to keep projects moving forward with excellence. If you thrive in the field and excel at problem-solving, this is your opportunity to help shape the future of Florida’s transportation systems. ESSENTIAL JOB FUNCTIONS: · Perform complex technical assignments in field surveying and construction layout. · Make and check engineering computations. · Observe and document construction work. · Conduct field tests. · Coordinate activities of CEI Inspectors and CEI Inspector’s Aides. · Confer with CEI Project Administrator/CEI Project Engineer to determine project details, such as plan preparation, acceptance testing, and evaluation of field conditions. · Confer with CEI Project Administrator/CEI Project Engineer to ensure production and staff problems are resolved. · Examine work progress, equipment, and construction sites to compare actual activities to specifications. · Estimate job requirements. · Provide advice on technical construction matters to client, Contractor, CEI Inspectors, and CEI Project Administrator/Project Engineer. · Plan and conduct field surveys to detail project sites and confirm existing conditions. · Perform quality assurance assessments – assessing the actual to contracted service, materials, and construction. · Act as a liaison between Company staff, client, and Contractors. · Inspect, sample, and test materials entering into the work in accordance with the plans, specifications, and special provisions for the construction Contract to determine that projects are constructed in reasonable conformity with such documents. · Meet deadlines. · Communicate with Company staff frequently using email and telephone. OTHER IMPORTANT FUNCTIONS: · Complete a detailed daily log of construction and inspection activities. · Maintain a safe work environment. EDUCATION AND EXPERIENCE: Education: High School Diploma or equivalent. Experience: 4 years of experience in construction inspection, of which 2 years shall have been in bridge and/or roadway construction inspection. Qualifications: As stipulated by Client and may include: · CTQP Concrete Field Inspector Level I · CTQP Asphalt Roadway Level I · CTQP Asphalt Roadway Level II · CTQP Earthwork Construction Inspection Level I · CTQP Earthwork Construction Inspection Level II · CTQP Pile Driving Inspection · CTQP Drilled Shaft Inspection (required for inspection of all drilled shafts including miscellaneous structures such as sign structures, lighting structures, and traffic signal structures) · IMSA Traffic Signal Technician Level 1 · FDOT Intermediate MOT · CTQP Final Estimates Level I Certifications: Nuclear Radiation Safety Florida Stormwater, Erosion and Sedimentation Control Training and Certification Program for Inspectors and Contractors Other: Valid Driver’s License with an acceptable MVR FDOT Critical Structures Construction Issues self-study course (bridges) Equal Opportunity Employer M/F/Disability/Veteran/AA/DFWP JEACES will not sponsor a work visa (e.g. H1B, etc.,) to fill this position. As a condition of employment with Jones Edmunds & Associates any successful job applicant will be required to pass a pre-employment background investigation, drug screen and motor vehicle report. Requirements:

Job DescriptionAre we the road to your future? We are currently searching for experienced Senior level and entry level CEI Inspectors to support our Southeast Region located in the state of Florida. To be considered for this position, applicants must have, at minimum, a high school diploma or equivalent. What you’ll be doing: • Making and checking engineering computations, • Inspecting construction work, • Conducting field tests, • Writes daily inspection reports, performs verification testing, and documents test results and observations, • Assists in all types of record keeping and field measurements, as needed, • Work is performed under the general supervision of the Project Administrator What you need to have: • High School Diploma or equivalent, • An Engineer Intern with a Civil Engineering Degree, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana, Please note that federal regulations may differ from state-specific guidelines. Valid driver's license., • A satisfactory motor vehicle report (MVR). Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-DNI

Job DescriptionDescription: JEACES is looking for a CEI Bridge Inspector to join our team! The CEI Bridge Inspector performs quality assurance assessments to ensure that construction matches the contracted services. The CEI Senior Inspector may lead a team of inspectors on large projects. Under the supervision and direction of the CEI Senior Project Engineer or CEI Project Administrator/Project Engineer, the duties of this position include verifying construction and completing work in accordance with the construction Contract documents. The CEI Senior Inspector provides surveillance of the Contractor's Quality Control activities at the project site. Duties also include maintaining a daily log of construction and inspection activities and comparing progress reports. This position frequently works with little direct supervision. ESSENTIAL JOB FUNCTIONS: • Perform complex technical assignments in field surveying and construction layout., • Make and check engineering computations., • Observe and document construction work., • Conduct field tests., • Coordinate activities of CEI Inspectors and CEI Inspector’s Aides., • Confer with CEI Project Administrator/CEI Project Engineer to determine project details, such as plan preparation, acceptance testing, and evaluation of field conditions., • Confer with CEI Project Administrator/CEI Project Engineer to ensure production and staff problems are resolved., • Examine work progress, equipment, and construction sites to compare actual activities to specifications., • Estimate job requirements., • Provide advice on technical construction matters to client, Contractor, CEI Inspectors, and CEI Project Administrator/Project Engineer., • Plan and conduct field surveys to detail project sites and confirm existing conditions., • Perform quality assurance assessments – assessing the actual to contracted service, materials, and construction., • Act as a liaison between Company staff, client, and Contractors., • Inspect, sample, and test materials entering into the work in accordance with the plans, specifications, and special provisions for the construction Contract to determine that projects are constructed in reasonable conformity with such documents., • Meet deadlines., • Complete a detailed daily log of construction and inspection activities. Education: High School Diploma or equivalent. Experience: 4 years of experience in construction inspection, of which 2 years shall have been in bridge and/or roadway construction inspection. Qualifications: As stipulated by Client and may include: • CTQP Concrete Field Inspector Level I, • CTQP Asphalt Roadway Level I, • CTQP Asphalt Roadway Level II, • CTQP Earthwork Construction Inspection Level I, • CTQP Earthwork Construction Inspection Level II, • CTQP Pile Driving Inspection, • CTQP Drilled Shaft Inspection (required for inspection of all drilled shafts including miscellaneous structures such as sign structures, lighting structures, and traffic signal structures), • IMSA Traffic Signal Technician Level 1, • FDOT Intermediate MOT, • CTQP Final Estimates Level I, • Certifications: Nuclear Radiation Safety, • Florida Stormwater, Erosion and Sedimentation Control Training and Certification Program for Inspectors and Contractors, • Other: Valid Driver’s License with an acceptable MVR Jones Edmunds & Associates will not sponsor a work visa (e.g. H1B, etc.,) to fill this position. As a condition of employment with Jones Edmunds & Associates any successful job applicant will be required to pass a pre-employment background investigation, drug screen and motor vehicle report. Requirements:

Job Description4656 Collins Rd. #1 Jacksonville, FL 32244 Job Title: Landscape Technician Department: Landscaping Reporting to: Landscape Supervisor Date: 04/09/2015 Position Status: ☐ New ☒ Updated FLSA Status: ☒ Non-exempt ☐ Exempt Job Summary: Under a crew leader’s guidance and with additional training, the incumbent in this position will work to maintain landscaped grounds to a specified high standard. Minimum Qualifications: Education High school or GED preferred Experience Prior landscape maintenance preferred, but not required. Licensure, Certification, and/or Registration Valid Florida driver’s license preferred Other • Dirver's license REQUIRED., • Must be able to work flexible hours, • Must be able to lift up to 50 pounds and stand for long periods of time., • Must be able to perform duties that require a great deal of bending., • Able to use edger, leaf blower and lawn mower to maintain grounds., • Ability to work in extreme weather conditions. Essential Duties % of Time • Identification and removal of plants determined to be weeds in their present locations., • Removal of any debris, litter, and trash in and around shrub beds., • Removal of dead leaves, flowers and other materials, and trimming as instructed. Other Duties % of Time Supervisory/Decision-making Authority Does the position require customary supervision and management of at least 2 or more full-time employees? ☐ Yes ☒ No Enter the number of direct reports and their position titles: 0 PHYSICAL REQUIREMENTS: Required • Standing, • Walking, • Lifting (Up to 50lbs), • Carrying (Up to 50lbs), • Pushing/Pulling, • Bending/Stooping, • Reaching, • Grasping, • Turning, • Reading HAZARDS: • Proximity to moving mechanical parts, • Housekeeping and/or cleaning agents, • Toxic or caustic chemicals, • Landscaping materials and products Required • Drive motor vehicle, • Respectful client relationships, • Verbal communication (including telephone), • Team-oriented and collaborative interpersonal relationships, • Maintain records

Job Description GreatLIFE Golf is one of the largest Golf Course Ownership / Management Companies in the country with over 50 golf courses in multiple states. If you’re looking for a fun and casual career in sports and entertainment, this may be the position for you! Feel free to check out our website for more information about who we are as a company and what services we offer to evaluate if your values match ours! Windsor Parke Golf Club located in Jacksonville, Florida is seeking a full time, hourly Course Maintenance employees to join our Agronomy team. Full-time positions will come with a full benefits package to include Medical, Dental and Vision coverage as well as Paid Time Off and Holiday Pay. Please see a general job description below and should you feel your knowledge, education and experience could be a match, apply today! Pay Rate: $15.00 - $20.00per hour Job Description: Performs a diverse range of activities involved in golf course maintenance and constructions. Performs semi-skilled grounds construction and maintenance work and related tasks as required. Responsible for daily course appearance. Essential Responsibilities: • Assists with preparing the course for daily play., • Rake the bunkers., • Cut and trim golf course greens, tees, fairways and roughs., • Assists with watering the roughs., • Applies growth enhancers and disease, • Cuts grass and trims weeds using hand mower or power driven lawn mower, weed trimmer and brush cutter., • Plants grass, trees, shrubs or flowers according to instructions and planned design of landscaped area., • Applies mulch to designated areas., • Pulls weeds around bushes, trees and flower beds., • Ability to work variable hours., • Performs general landscape maintenance using hand held equipment., • Rakes and maintains sand bunkers., • Operates small machinery to assist with edging, trimming and mowing., • Prepares soil beds for sod, seed and vegetative material., • Involved with tasks related to course detail., • Assists with golf course set up procedures., • Operates utility vehicles for hauling material and removing debris., • Performs general labor and cleaning related to golf course maintenance equipment., • Delivers drinking water on course., • Incorporates safe work practices in job performance, • Regular & reliable attendance Degree/Licenses: High school education preferred; or up to one month related experience or training; or equivalent combination of education and experience Physical Demands: The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Regularly required to have full range of mobility in upper and lower body; be able to reach overhead; be able to work in various positions, including stooping, standing, bending over, sitting, kneeling and squatting for extended periods of time; be able to lift, pull and push materials and equipment to complete assigned job tasks and is frequently able to lift 50 pounds of weight through the work day and occasionally lifts up to 100 pounds. Employee is regularly exposed to outdoor weather conditions, chemicals, pesticides, gasoline, vibration, mechanical hazards and electrical hazards. Work extended hours during golf season.

Job Description We are hiring immediately for a New Project! Experienced Bulkhead Wall Builder with experience laying out, jetting/setting piles along with building the rest of a bulkhead in Jacksonville, FL. Looking for a working foreman that can run a crew and can communicate the needs of his crew to build in a safe and timely manner to complete successful projects. We are a well-known company in NE Florida that does both residential and commercial marine construction work. We are adding to our residential side of the marine business. Contact us today to set up an interview. You must have marine construction experience building wooden bulkheads. Job Type: Full-time Foreman Full-time Foreman's Right Hand Man Full-time Labor (Must Have Wooden Bulkhead Experience) Pay: $18.00 - $25.00 per hour, based on experience and knowledge Education: High school or equivalent (Preferred but not required) Construction Experience: 1 to 2 years (Preferred) references requested Qualifications: • Experience Jetting/Setting Pilings and Hammering, • Experience laying out designs and building walls / vinyl and other a plus., • Safe Operation of an excavator a plus used in building of walls., • Able to adhere to all construction site safety rules and techniques., • Communicate with direct supervisor on materials and other items needed to perform work safely, on time, and on budget. Benefits: Paid Holidays Health Benefits Available Job Posted by ApplicantPro

Job Description Position Type: Contract Hybrid (work schedule - 4 days in office, 1 day remote) Required: • High School Diploma (GED) or equivalent work experience., • Capability to lift and move equipment safely and efficiently, adhering to health and safety standards., • Experience in warehouse operations, logistics, or inventory management., • Experience with customer support or handling inquiries in a professional environment., • Preferred Automotive Retail, Automotive Technical or Network/IT experience., • Detail Oriented: Focuses on accuracy, thoroughness, and consistency in all tasks,, • Organization: Ability to manage time, prioritize tasks, and maintain structured processes to achieve business goals effectively., • Work Independently: Ability to work independently with limited support from management., • Communication Skills: Clear verbal and written communication to explain solutions effectively., • Computer Skills: Proficiency in basic Office applications., • Multitasking: Handling multiple systems or tasks simultaneously., • Critical Thinking: Analyzing situations to find effective solutions quickly., • Adaptability: Ability to adapt based on varying customer needs or changing company protocols. Responsibilities: • This position serves as a pivotal team member, directly contributing to the smooth operation of the organization's equipment returns and logistics processes., • This role involves managing the lifecycle of returned equipment, from the moment it arrives at the warehouse to its successful shipment to Germany, ensuring efficiency, accuracy, and compliance at every step., • In addition to handling returns and shipments, this role involves responding to support ticket inquiries for products and services., • Accurately receive and inspect returned equipment, verifying that all components are included as per inventory records., • Document all returns, ensuring detailed records of equipment condition, components, and associated details., • Repackage equipment securely and in line with shipping standards, ensuring compliance with export requirements., • Coordinate and execute the timely shipping of returned equipment to Germany, liaising with logistics providers as needed., • Maintain high standards of accuracy and care in handling, storing, and shipping equipment., • Retain proper inventory and storage of internal equipment., • Order new and replacement hardware and software., • Respond to incoming Dealer Support tickets related to products and services, prioritizing these inquiries, and responding within targeted times.Company DescriptionHired by Matrix believes in the human touch and starts every partnership with an in-depth conversation. By talking with our clients about their hiring needs and listening to job seekers describe their career goals, we build an understanding of what they are looking for and work hard to make it happen.Hired by Matrix believes in the human touch and starts every partnership with an in-depth conversation. By talking with our clients about their hiring needs and listening to job seekers describe their career goals, we build an understanding of what they are looking for and work hard to make it happen.

Job Description Dynamic Sales Rep Wanted A Sales Career That Grows With You Are you looking for a career path that gives you the freedom and flexibility to control your schedule, but also has the security and stability of a large company? Globe Life Liberty National Division is seeking an ambitious applicant who is ready to work hard and build their own business while helping those around them. We are a leader in the life and supplemental health insurance industry and we’ve been helping working-class families secure financial protection for their loved ones since 1900. What You Get • Flexible schedule, • Competitive pay, • Advancement opportunities, • Performance awards, • Leadership development, • Community impact Globe Life Liberty National Division is a proud member of the National Association of Colleges and Employers (NACE). Benefits To You With state licensing taking as few as 10 days, a career with LIBERTY NATIONAL can provide competitive compensation, advancement opportunities, independence, flexibility, performance incentives, awards, development programs and so much more. We have positions open now and we can conduct virtual interviews so you can schedule a personal interview from the comfort of your home. Company DescriptionAt Globe Life Liberty National Division, everything we do revolves around making tomorrow better. We empower our customers to Make Tomorrow Better by offering products that help secure their financial future and protect them when tragedy strikes. We offer sales agents the opportunity to Make Tomorrow Better by protecting more lives and, in doing so, leaving a legacy. We give our employees the chance to Make Tomorrow Better by giving back, supporting initiatives with a service-first mindset, and promoting from within. Our actions today have a lasting impact on tomorrow. Therefore, we aim to inspire everyone in our network to help Make Tomorrow Better.Globe Life Liberty National Division is a wholly-owned subsidiary of Globe Life Inc. (NYSE: GL), a Fortune 1000 Company, and S&P 500 Company. Globe Life's roots began in 1900 with a mission to help protect America's families. Globe Life is the Official Life Insurance of the Texas Rangers and the Official Life Insurance of the Dallas Cowboys.At Globe Life Liberty National Division, everything we do revolves around making tomorrow better. We empower our customers to Make Tomorrow Better by offering products that help secure their financial future and protect them when tragedy strikes. We offer sales agents the opportunity to Make Tomorrow Better by protecting more lives and, in doing so, leaving a legacy. We give our employees the chance to Make Tomorrow Better by giving back, supporting initiatives with a service-first mindset, and promoting from within.\r\n\r\nOur actions today have a lasting impact on tomorrow. Therefore, we aim to inspire everyone in our network to help Make Tomorrow Better.Globe Life Liberty National Division is a wholly-owned subsidiary of Globe Life Inc. (NYSE: GL), a Fortune 1000 Company, and S&P 500 Company. Globe Life's roots began in 1900 with a mission to help protect America's families. Globe Life is the Official Life Insurance of the Texas Rangers and the Official Life Insurance of the Dallas Cowboys.

Job Description A Sales Career That Grows With You Are you looking for a career path that gives you the freedom and flexibility to control your schedule, but also has the security and stability of a large company? American Income Life is seeking a driven applicant who is ready to work hard and build their own business while helping people secure much-needed financial protection for their loved ones. With roots going back to 1900, we provide supplemental insurance coverage to labor unions, credit unions and associations in 49 states, the District of Columbia, Canada and New Zealand. What You Get • Flexible schedule, • Competitive pay, • Advancement opportunities, • Performance awards, • Leadership development, • Community impact Benefits To You With state licensing taking as few as 10 days, a career with American Income Life can provide competitive compensation, advancement opportunities, independence, flexibility, performance incentives, awards, development programs and so much more. We have positions open now and we can conduct virtual interviews so you can schedule a personal interview from the comfort of your home.

Job Description Labor One is hiring Pipe Welders for a shipyard in Port St. Joe, FL Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (956)382-2631 / (281)965-2749 Job Description POSITION SUMMARY: Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because the shipyard is continually growing to meet the needs of its customers, the essential duties and responsibilities may be different than described. -Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. -Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. -Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. -Complete welds to the specified standards using appropriate equipment and materials. -Install and verify operation of high-pressure steel pipes and fittings. -Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. -Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipe and/or similar tubular products. -Test installed piping systems and install other related items in accordance with the applicable plans and specifications. -Set up equipment and welding parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. -Troubleshoot equipment. -Produce high-quality welds, including water-tight penetrations with a variety of materials including weld steel, stainless, and aluminum. -Work with minimal supervision. -Perform other duties as assigned. -Successfully pass in a 6G (6" pipe coupon) Stainless Steel, CUNI, & Aluminum - TIG -Successfully pass in a 6G (6" weld coupon) Carbon Steel - root and cap REQUIREMENTS: Education/Experience: High school diploma or GED equivalence plus three to five years' pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror welding. Requires knowledge of welding symbols, ship terminology, and Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety-conscious, and multi-tasking. Maintain the confidential integrity of details pertaining to the shipyard. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. The specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstand extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Centra Healthcare Allied is seeking a travel Physical Therapy Assistant for a travel job in Jacksonville, Florida. Job Description & Requirements • Specialty: Physical Therapy Assistant, • Discipline: Therapy, • Start Date: ASAP, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel A great SNF / LTC is looking for an experienced or newly graduated Physical Therapist Assistant / Physical Therapy Assistant / PTA to join their growing team for a contract assignment! The Physical Therapist Assistant / Physical Therapy Assistant / PTA works under the supervision of either Registered or Licensed Physical Therapists. The Physical Therapist Assistant / Physical Therapy Assistant / PTA will use physical treatment procedures to help improve mobility and relieve pain and disability caused by disease or injury. Some of the techniques that the PTA will use for treating a patient include: massages, electrical stimulation, paraffin baths, hot and cold packs, traction and ultrasound and other assigned exercises. Requirements include: • Must have earned an Associates degree from an accredited school., • Current state license as a Physical Therapist Assistant / PTA or proactively in the process of the application process for current state licensure as a Physical Therapist Assistant / Physical Therapy Assistant / PTA., • Current CPR certification., • Provide skilled physical therapy services / interventions in accordance with physician orders and under the supervision of a Registered or Licensed Physical Therapist / PT., • Implement and modify the patient's physical therapy plan of treatment under the supervision of a Registered or Licensed Physical Therapist / PT ., • Effectively collaborates within an interdisciplinary team to meet patients goals. About Centra: Centra Healthcare Solutions is a nationwide employment firm focusing on finding you a Physical Therapy Assistant Job, PTA Job, PTA Travel Job, Travel Physical Therapy Assistant Job, Physical Therapist Assistant Job and Travel PTA Job. We have many dynamic positions with cutting edge programs throughout the entire United States and various settings to meet each healthcare professional's criteria. Benefits of a Local Contract or Travel Assignment through Centra: • Highly competitive pay rates, • 401(k) plan, • Direct deposit, • CEU Reimbursement, • A chance to explore new places and new opportunities throughout the United States, • High coverage of the premiums of a comprehensive health insurance plan, • License and medical reimbursement, • Housing accommodations, • Assignment completion bonuses Please apply online for this fantastic opportunity. We look forward to assisting you in finding an optimal career. Centra Healthcare Allied Job ID #882370. Pay package is based on 8.0 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Physical Therapist Assistant (PTA) SNF / LTC

Job Description Position: 2nd Class Welder Position Type: Full-time, Non-Exempt, Hourly Reports To: Foreman Location: Jacksonville, FL Who We Are Stellar Energy provides bespoke state-of-the-art solutions customers build in for optimized performance now, bridging a critical gap in the energy transition towards a better future. In business for over 25 years, we have added efficiency and capacity to customer infrastructure in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Lower emissions for greater sustainability. Hyperscale deployment at the best possible speed to first megawatt. All delivered with a 100% performance test passage rate. What You Will Be Doing Performing a variety of welding functions in all positions on structural plate and 6G pipe with SMAW, FCAW and GTAW. What We’re Looking For Must Have's: • 1-2 years’ experience welding., • High school diploma or equivalent (preferred)., • Experience in threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting, • Fluent in understanding job specific WPS / PQR’s and capable of setting machine up for performance in all positions to certify testing criteria, • Ability to work in confined spaces and wear protective gear for extended periods., • Strong attention to detail and a safety-conscious mindset., • 4+ Years’ experience in Welding SMAW, FCAW and GTAW, or a combination., • 2 years of vocational technical training What We Offer • Retention Bonuses – Quarterly bonuses in the amount of $300.00, • Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment., • 401k program – Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match., • 3-Weeks Paid Time-Off, • 10-Paid holidays a year, • Safety Boot Program – $100.00 reimbursement for the purchase of safety boots, yearly., • Gym Membership, • 2nd Shift Differential – 10% What We Pay Starting at $22 / hourly What Hours You Will Work This is a full-time position. First shift days and hours of work are Monday through Friday, 6:00 am to 4:30 pm. Occasional evening and weekend work may be required as job duties demand. Work Conditions This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description Position: 1st Class Mechanical Fitter 2nd Shift Position Type: Full-time, Non-Exempt, Hourly Reports To: Foreman Location: Jacksonville, FL Who We Are Stellar Energy provides bespoke state-of-the-art solutions customers build in for optimized performance now, bridging a critical gap in the energy transition towards a better future. In business for over 25 years, we have added efficiency and capacity to customer infrastructure in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Lower emissions for greater sustainability. Hyperscale deployment at the best possible speed to first megawatt. All delivered with a 100% performance test passage rate. What You Will Be Doing A First-Class Pipe Fitter with Stellar Energy will have experience and working knowledge of mechanical equipment, piping installation, and various terminologies. Blueprint reading, measurements, setting equipment/piping, and job specifications to build an integrally complete piping system. Installation of various valves, suction diffusers, guides, circuit setters, expansion tanks, pumps, chillers, automatic air vents, pressure regulators. As well as safely and efficiently direct and monitor two or more helpers. Complies with all company policies, procedures and safety requirements and physically / medically qualified to wear required PPE per OSHA standards. Prepares for ISO 9001 and other audits. What We’re Looking For Must Have's: • Knowledge of threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting, • Fluent in all hydro process for 150 psi testing and inspections, • Minimum of 2+ years related experience or training, • Knowledge of datum lining, piping center lines and work points, • Strong attention to detail, • Physical stamina and the ability to work in various conditions (e.g., confined areas, heights) and physically / medically qualified to wear required PPE, • High School Diploma or GED, • 6+ Years’ experience in Industrial Mechanical Fitting., • Accredited vocational technical training What We Offer • Retention Bonuses – Quarterly bonuses in the amount of $300.00, • Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment., • 401k program – Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match., • 3-Weeks Paid Time-Off, • 10-Paid holidays a year, • Safety Boot Program – $100.00 reimbursement for the purchase of safety boots, yearly., • Gym Membership, • 2nd Shift Differential – 10% What We Pay Starting at $29 / hourly What Hours You Will Work This is a full-time position. Second shift days and hours of work are Monday through Friday, 4:00 pm to 2:30 am. Occasional evening and weekend work may be required as job duties demand. Work Conditions This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description Duties and Responsibilities include, but are not limited to, the following: * Weld repair and manufacture of turbine generator components, minaly TIG welding. * Disassembly and assembly of turbine/generator components. * Part/component inspections. * Prep and blend parts. Including but not limited to media blasting. * Work with job site managers. * Operate forklifts and cranes. * Maintain a clean and safe working environment. * Support other areas of the shop as needed. Position Requirements: * Minimum of 1 year experience preferred. * Familiarity with Power Generation Industry preferred. * Availablity for significant mandatory overtime druring peak periods. * Knowledge of precision measurement equipment. * Ability to read and interpret blueprints and technical specifications. * Ability to perform welding tasks on delicate components with precision and minimal distortion. * Ability to set up and operate welding equipment. * Mechanical skills. * Communication skills, both verbal and written. * Ability to foresee changes relevant to area of responsibility. * Ability to organize work assignments to ensure efficient operations within the area. * Ability to communicate in a clear and concise manner to achieve intended objective. * Good organizational skills. * Ability to stand and walk for extended periods of time and in environments that require frequent bending, reaching and lifting. * Ability to follow safety guidelines set by customer and ARMS. * OSHA 10 certification, preferred. * Must have a valid driver’s license. * Ability to pass drug test and background check. You should be proficient in: • OSHA 10-Hour Certification (OSHA 10), • Field Measurements, • Welding Setups for Production, • Forklift Licensed, • Deburring Experience, • High School / GED, • MIG Welder, • TIG Welder $24 - $28 / hr

Job Description Position: 2nd Class Structural Fitter Position Type: Full-time, Non-Exempt, Hourly Reports To: Foreman Location: Jacksonville, FL Who We Are Stellar Energy provides bespoke state-of-the-art solutions customers build in for optimized performance now, bridging a critical gap in the energy transition towards a better future. In business for over 25 years, we have added efficiency and capacity to customer infrastructure in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Lower emissions for greater sustainability. Hyperscale deployment at the best possible speed to first megawatt. All delivered with a 100% performance test passage rate. What You Will Be Doing A Second Class Structural Fitter with Stellar Energy will have experience of industrial structural fitting, assembly, & welding. As well as various terminologies, blueprint reading, measurements, take outs, and job specifications to build an integrally complete erection system. What We’re Looking For Must Have's: • 2+ Years’ experience in Industrial Structural Fitting, • Proficient in reading and interpreting blueprints and technical drawings., • Threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting, • Installation knowledge of all forms of structural system hangers, supports, braces, etc., from temporary to jamb-nut completion., • Ability to perform accurate measurements and calculations., • Excellent problem-solving skills and attention to detail., • Physical stamina and the ability to work in various conditions (e.g., confined areas, heights) and physically / medically qualified to wear required PPE, • High School Diploma or GED, • 3+ Years’ experience in Industrial Structural Fitting., • Tack welding ability, • Some vocational technical training, • Familiarity with Flux-core welding techniques What We Offer • Retention Bonuses – Quarterly bonuses in the amount of $300.00, • Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment., • 401k program – Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match., • 3-Weeks Paid Time-Off, • 10-Paid holidays a year, • Safety Boot Program – $100.00 reimbursement for the purchase of safety boots, yearly., • Gym Membership, • 2nd Shift Differential – 10% What We Pay Starting at $24/ hourly What Hours You Will Work This is a full-time position. First shift days and hours of work are Monday through Friday, 6:00 am to 4:30 pm. Occasional evening and weekend work may be required as job duties demand. Work Conditions This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description Position: 2nd Class Mechanical Fitter 2nd Shift Position Type: Full-time, Non-Exempt, Hourly Reports To: Foreman Location: Jacksonville, FL Who We Are Stellar Energy provides bespoke state-of-the-art solutions customers build in for optimized performance now, bridging a critical gap in the energy transition towards a better future. In business for over 25 years, we have added efficiency and capacity to customer infrastructure in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Lower emissions for greater sustainability. Hyperscale deployment at the best possible speed to first megawatt. All delivered with a 100% performance test passage rate. What You Will Be Doing A Second-Class Pipe Fitter with Stellar Energy will have experience and working knowledge of mechanical equipment, piping installation, and various terminologies. Blueprint reading, measurements, setting equipment/piping, and job specifications to build an integrally complete piping system. Installation of various valves, suction diffusers, guides, circuit setters, expansion tanks, pumps, chillers, automatic air vents, pressure regulators. As well as safely and efficiently direct and monitor two or more helpers. Comply with all company policies, procedures and safety requirements and physically / medically qualified to wear required PPE per OSHA standards. Prepares for ISO 9001 and other audits. What We’re Looking For Must Have's: • Knowledge of threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting, • Fluent in all hydro process for 150 psi testing and inspections, • Minimum of 1+ years related experience or training, • Knowledge of datum lining, piping center lines and work points, • Strong attention to detail, • Physical stamina and the ability to work in various conditions (e.g., confined areas, heights) and physically / medically qualified to wear required PPE, • High School Diploma or GED, • 3+ Years’ experience in Industrial Mechanical Fitting., • Accredited vocational technical training What We Offer • Retention Bonuses – Quarterly bonuses in the amount of $300.00, • Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment., • 401k program – Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match., • 3-Weeks Paid Time-Off, • 10-Paid holidays a year, • Safety Boot Program – $100.00 reimbursement for the purchase of safety boots, yearly., • Gym Membership, • 2nd Shift Differential – 10% What We Pay Starting at $24 / hourly What Hours You Will Work This is a full-time position. Second shift days and hours of work are Monday through Friday, 4:00 pm to 2:30 am. Occasional evening and weekend work may be required as job duties demand. Work Conditions This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description Vector Marketing is currently running interviews for sales rep positions. Our sales reps sell Cutco products one on one with customers, emphasizing customer service. No previous experience needed. Interview now and start within the week. What we offer: • Paid Weekly – Our reps are paid $20.00 base-appt not based on sales or results. We have a commission structure set up based on performance. There is an opportunity to make more, but there is still a fall back for the sales rep to make an income even if they have an off week., • Training – A lot of our sales reps start with very little work or sales experience. We get new reps up to speed very quickly and help more experienced people gain additional skills., • Product - We sell Cutco products that are used in the home focusing on the kitchen and some gardening tools as well. Previous experience & knowledge about home goods or sales isn’t required., • Flexible Schedules – whether are rep is looking to supplement their current income, seasonal work, a student looking for flexible work around classes, or just someone who is looking for a job to work around their unique schedule – we can work around their schedules., • Location - Sales reps work locally after training. Meetings and training are held in the office., • Enjoys working with people, • Conditions apply, • All ages 18+ or 17 and a high school graduate People who do well with us have experience in just about every field you can imagine - customer service, stocked shelves in a warehouse, as a waiter or waitress, administrative assistant, barista, cashier, and some have never worked before. We encourage applicants of all ages and experience, as we do not discriminate on the basis of an applicant’s age. If you think you would be a good fit for our team, request an interview today. A staff member will follow up with you about setting up a time to meet with a manager.

Job Description 2nd Class IMP Fitter Position Type: Full-time, Exempt, Salary Reports to: Senior EHS Manager Location: Jacksonville, FL Who We Are: Stellar Energy provides custom power augmentation and energy plant solutions for power generation and utilities, liquefied natural gas (LNG), data center, biopharma and other markets. Stellar Energy’s innovative solutions include turbine inlet air chilling, inlet air conditioning (heating and cooling), evaporative cooling, direct contact air chilling, thermal energy storage, district cooling and central utility plants. The company’s experience spans more than 20 years and stretches across the globe, with offices in the United States, Asia and the Middle East and North Africa (MENA) region. What you will be doing: A IMP Fitter with Stellar Energy will have experienced working knowledge of the Insulated Metal Panel installation, Assembly and the various terminologies, blueprint reading, measurements, take outs, job specifications, etc., to build an integrally complete erection system. What we’re looking for: Must Have's: • Basic math and language skills are required, • Grinding, welding, brazing, rigging, and cutting sheet metal., • 1 Year related experience or training, • Physical stamina and the ability to work in various conditions (e.g., confined areas, heights), • Valid driver’s license, • High School Diploma or GED, • 2 Years’ experience in Insulated Metal Panels (IMP)., • Some vocational technical training is desired. What We Offer: • Retention Bonuses – Quarterly bonuses in the amount of $300.00, • Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment., • 401k program – Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match., • 3-Weeks Paid Time-Off., • 10-Paid holidays a year., • Safety Boot Program – $100.00 reimbursement for the purchase of safety boots, yearly., • Gym Membership, • Tuition Assistance Starting at $N/A per hour and up depending on experience What Hours you will work: This is a full-time position. First shift days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Occasional evening and weekend work may be required as job duties demand. Travel: Travel between the two Jacksonville manufacturing facilities expected for this position. Work Conditions: This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Centra Healthcare Allied is seeking a travel Physical Therapist for a travel job in Jacksonville, Florida. Job Description & Requirements • Specialty: Physical Therapist, • Discipline: Therapy, • Start Date: ASAP, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel A great SNF / LTC is looking for an experienced or newly graduated Physical Therapist / PT to join their growing team for a contract assignment! The Physical Therapist / PT is responsible for the assessment of referred patients that require rehabilitation services which includes; providing direct patient care to assess their medical condition, functional capabilities, limitations and restrictions and potential for rehabilitation. Also, the Physical Therapist / PT will establish and administer a treatment program with specific goals determined according to the patient's capacity and tolerance under the direction of the Physician. As well, the Physical Therapist / PT must set realistic and achievable goals for their patients, document and record the patient's condition and educate patients and families in an appropriate physical therapy method. Requirements include: • Must have graduated from an accredited school., • Current state license as a Registered Physical Therapist / PT or proactively in the process of the application process for current state licensure as a Registered Physical Therapist / PT., • Current CPR certification., • Develop a plan of care for each physical therapy patient., • Provide skilled physical therapy services / interventions in accordance with physician orders., • Assesses patient needs, plans for, evaluates and modifies care to meet goals of physical therapy interventions., • Collaborates with all disciplines to plan and evaluate team goals for each patient. About Centra: Centra Healthcare Solutions is a nationwide employment firm focusing on finding you a Physical Therapy Job, PT Job, PT Travel Job, Travel Physical Therapy Job, Physical Therapist Job and Travel PT Job. We have many dynamic positions with cutting edge programs throughout the entire United States and various settings to meet each healthcare professional's criteria. Benefits of a Local Contract or Travel Assignment through Centra: • Highly competitive pay rates, • 401(k) plan, • Direct deposit, • CEU Reimbursement, • A chance to explore new places and new opportunities throughout the United States, • High coverage of the premiums of a comprehensive health insurance plan, • License and medical reimbursement, • Housing accommodations, • Assignment completion bonuses Please apply online for this fantastic opportunity. We look forward to assisting you in finding an optimal career. Centra Healthcare Allied Job ID #882085. Pay package is based on 8.0 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Physical Therapist (PT) SNF / LTC

Job Description Are you an experienced Welder/Fabricator looking for a new and exciting challenge? Are you seen as the "Go To" when your coworkers, family, or friends have questions regarding anything marine? Have you ever thought about training the next generation of Technician. Jones Technical Institute might have an amazing opportunity for you to become a Technical Instructor. Never taught? No problem! If you have the drive, patience, and skills we'll train you! Why not take the next step to make that happen for the next generation of technicians. Nothing is more rewarding than seeing the student you taught succeed, knowing you were the one that made it happen! Position Overview: As a Technical Instructor, you'll play a pivotal role in shaping the minds and skills of our students. Your expertise in gasoline and diesel engines, diagnostics, and repair will be the guiding light that leads them to a promising career in many different industries. We believe that hands-on learning is the key to success, so get ready to dive into the world of interactive teaching and inspire the next generation to conquer the challenges of modern marine technology. What We Offer: • $25 - $29 per hour base salary, • Night Compensation incentives, • Weekends OFF, • Paid Training, • Discounted Tuition for you AND your Immediate Family, • Medical/Dental/Vision/Life Ins/STD & LTD Ins, • 401K with employer sponsored matching, • Minimum of 11 Paid Holidays, • Robust Paid Time Off Schedule Responsibilities: • Inspire and Educate: Create an engaging and inclusive learning environment where students can flourish, fostering their passion for welding while imparting your expert knowledge., • Hands-On Training: Lead by example and provide practical demonstrations, ensuring students gain real-world experience., • Curriculum Development: Collaborate with our education team to enhance existing courses and develop new ones that align with industry trends and advancements., • Mentorship: Guide and mentor students on their individual projects, encouraging them to think critically and find innovative solutions., • Education: High school diploma or GED, • Experience: 3 years of practical work experience in the field, • Communication Skills: Strong communication and interpersonal skills, enabling you to effectively connect with students and fellow staff Compass Rose Foundation (CRF) is an 80-year-old Florida chartered non-profit organization that fulfills its mission by governing post secondary institutions. Steeped in the management of career-oriented institutions, its current charge is the development of trade and technical schools. Under this endeavor, CRF has one institution within its auspice of control. Jones Technical Institute (J-Tech), located in Jacksonville offers programs in Automotive, Diesel, Marine & RV Technology as well as HVAC-R and Commercial Truck Driving, Welding and soon to be Network Administration and Security. J-Tech, founded in 2013, is located on the south side of Jacksonville. Our campus is comprised of 28 acres and 168,000 square feet. Since its founding, our Automotive and Diesel programs have produced over 1500 graduates while its Commercial Truck Driving program has assisted almost thousands of graduates obtain a Class A Commercial Driver’s License. We encourage you to review each of the following websites to learn more about who we are: • www. compassrosefoundation.org Job Types: Full-time, Part-time, Temporary, Contract We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionBenefits: Reports To: Fabrication Supervisor / Production Manager Summary: The Signage Fabricator is responsible for the construction, assembly, and finishing of high-quality custom signage, adhering to design specifications, and company standards. This role requires expertise in various fabrication techniques, material handling, and operation of specialized machinery. Responsibilities: • Fabrication and Assembly: Construct and assemble various types of signs, interpreting design specifications and selecting appropriate materials. This includes cutting, shaping, and preparing materials using precision measurement techniques and specialized tools., • Equipment Operation & Maintenance: Operate and maintain fabrication equipment such as , welding, and vinyl plotters. Perform routine maintenance as needed. CNC router knowledge is a bonus., • Finishing and Quality Control: Apply finishes to signage and ensure all fabricated signs meet quality standards., • Collaboration & Communication: Collaborate with team members to ensure projects meet specifications and timelines., • Safety & Workspace Management: Adhere to safety policies and maintain a clean workspace.Skills & Qualifications:, • Education: High school diploma or equivalent; trade school certification preferred., • Experience: Proven experience in sign fabrication or equivalent., • Technical Skills: Proficient in interpreting sign details drawings/blueprints and use of fabrication equipment. Strong math skills are also required., • Soft Skills: Must have excellent attention to detail, strong problem-solving abilities, and effective communication skills., • Physical Requirements: Ability to stand for extended periods and lift materials. Must be comfortable working in a shop environment.Mandatory:, • Driver's license and ability to install signs., • Experience with computer software., • Welding or metal fabrication experience. Optional: Electrical knowledge is a bonus. Pay: Based on experience

Job Description Since 1996, RQ Construction, LLC. has been a leading player in Southern California's robust commercial and governmental Design-Build economy. We have a national and international presence spanning coast to coast, including U.S. Naval Base Guantanamo Bay, Cuba and now, Puerto Rico. We offer management of projects throughout the United States, with our field operations' team members who work on location for each of our projects. We specialize in fast-track projects in new commercial construction with a primary focus in the Department of Defense market. We are looking to hire a skilled Combination Welder to join our Mechanical team for ongoing work at Mayport Naval Base, FL. All work is to be performed on the military base and is paid the required Davis-Bacon prevailing wage, specific to the Mayport Naval Base, FL. Our Combination Welder will be responsible for using hand-welding, flame cutting, hand soldering, or brazing equipment to weld or join metal components. This position will require the ability to pass groove-weld qualification tests in all positions for multiple materials and processes using both Shielded Metal Arc Welding (SMAW) as well as Gas Tungsten Arc Welding (GTAW) as necessary. All work is completed on an active construction site, and in accordance with relevant codes. Work involves technical application of mechanical welding principles. This is all to be done using the appropriate equipment and implementing the required safety practices in support of RQ's Mission, Vision, and Values. Pay: $49.09 - 51.01 per hour Benefits: Medical, Dental, Vision, 401k with Match EDUCATION & EXPERIENCE • A high school diploma or GED is the preferred minimum formal education for this position. Should be supplemented by completion of a Union, private (in-house), military, or trade school apprenticeship program that includes theory and on-the-job, • 5 to 8 years(or equivalent) field or trade work experience as a Combination Welder in a commercial or facilities operations setting is required; government, military, or large commercial construction experience, • Candidates must be able to pass 6G GTAW & SMAW test before being hired., • CPR, First Aid, and OSHA 30-hour Certifications required; Specific training or certificates in the following preferred, training can be provided:, • Trenching and shoring training, • Fall protection, • Confined space training, • Forklift/Manlift training and certificate, • Power actuated tools training and certificate, • Lockout/Tagout training, • Scissor lift/boom lift certificate All candidates considered for hire must provide evidence of identity and U.S. work authorization at the time of hire. Additionally, all candidates must successfully pass a drug screening and commercial criminal background check, including a stricter Department of Defense background check, for access to job site at military base (if applicable for position being hired for). Job Posted by ApplicantPro

Job Description Position: 1st Class Welder Position Type: Full-time, Non-Exempt, Hourly Reports To: Foreman Location: Jacksonville, FL Who We Are Stellar Energy provides bespoke state-of-the-art solutions customers build in for optimized performance now, bridging a critical gap in the energy transition towards a better future. In business for over 25 years, we have added efficiency and capacity to customer infrastructure in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Lower emissions for greater sustainability. Hyperscale deployment at the best possible speed to first megawatt. All delivered with a 100% performance test passage rate. What You Will Be Doing Performing a variety of welding functions in all positions on structural plate and 6G pipe with SMAW, FCAW and GTAW. Willingness to cross train for multi-function structural and piping assembly processes. Fluent in understanding job specific WPS / PQR’s and capable of setting machine up for performance in all positions to certify testing criteria. Analyze blueprints for weld insignia and the application thereof to assembly components on piping and structural systems. The ability to identify correctly, measured, hand dressed, cut and fit prepare metal surfaces for welding process to be completed per job specific requirements. Capable of visual observation of pre- and post-welded surfaces; and the interpretation of fulfilled job requirements with micrometer, caliper and other precision measuring instruments. Technically proficient in the interpretation of insufficient weld criteria and knowledge to efficiently blend to repair. Complies with all company policies, procedures and safety requirements and physically / medically qualified to wear required PPE per OSHA standards. Prepares for ISO 9001 and other audits. What We’re Looking For Must Have's: • 3+ years’ experience welding., • High school diploma or equivalent (preferred)., • Experience in threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting, • Fluent in understanding job specific WPS / PQR’s and capable of setting machine up for performance in all positions to certify testing criteria, • Ability to work in confined spaces and wear protective gear for extended periods., • Strong attention to detail and a safety-conscious mindset., • 6+ Years’ experience in Welding SMAW, FCAW and GTAW, or a combination., • 2 years of vocational technical training What We Offer • Retention Bonuses – Quarterly bonuses in the amount of $300.00, • Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment., • 401k program – Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match., • 3-Weeks Paid Time-Off, • 10-Paid holidays a year, • Safety Boot Program – $100.00 reimbursement for the purchase of safety boots, yearly., • Gym Membership, • 2nd Shift Differential – 10% What We Pay Starting at $25 / hourly What Hours You Will Work This is a full-time position. First shift days and hours of work are Monday through Friday, 6:00 am to 4:30 pm. Occasional evening and weekend work may be required as job duties demand. Work Conditions This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: • Our people are our #1 priority., • Teamwork is the best way to solve problems., • Safety is critical. Everyone is responsible for creating a safe work environment., • We strive to find new and better ways of doing things every day., • Clear expectations and directions are always given., • Frequent coaching and support lead to great performers and high quality for our customers., • A manager's job is to set each employee up for success every day., • We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together., • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development. bgFcZzNGMU

Job Description Position: 1st Class Mechanical Fitter Position Type: Full-time, Non-Exempt, Hourly Reports To: Foreman Location: Jacksonville, FL Who We Are Stellar Energy provides bespoke state-of-the-art solutions customers build in for optimized performance now, bridging a critical gap in the energy transition towards a better future. In business for over 25 years, we have added efficiency and capacity to customer infrastructure in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Lower emissions for greater sustainability. Hyperscale deployment at the best possible speed to first megawatt. All delivered with a 100% performance test passage rate. What You Will Be Doing A First-Class Pipe Fitter with Stellar Energy will have experience and working knowledge of mechanical equipment, piping installation, and various terminologies. Blueprint reading, measurements, setting equipment/piping, and job specifications to build an integrally complete piping system. Installation of various valves, suction diffusers, guides, circuit setters, expansion tanks, pumps, chillers, automatic air vents, pressure regulators. As well as safely and efficiently direct and monitor two or more helpers. Complies with all company policies, procedures and safety requirements and physically / medically qualified to wear required PPE per OSHA standards. Prepares for ISO 9001 and other audits. What We’re Looking For Must Have's: • Knowledge of threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting, • Fluent in all hydro process for 150 psi testing and inspections, • Minimum of 2+ years related experience or training, • Knowledge of datum lining, piping center lines and work points, • Strong attention to detail, • Physical stamina and the ability to work in various conditions (e.g., confined areas, heights) and physically / medically qualified to wear required PPE, • High School Diploma or GED, • 6+ Years’ experience in Industrial Mechanical Fitting., • Accredited vocational technical training What We Offer • Retention Bonuses – Quarterly bonuses in the amount of $300.00, • Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment., • 401k program – Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match., • 3-Weeks Paid Time-Off, • 10-Paid holidays a year, • Safety Boot Program – $100.00 reimbursement for the purchase of safety boots, yearly., • Gym Membership, • 2nd Shift Differential – 10% What We Pay Starting at $27 / hourly What Hours You Will Work This is a full-time position. First shift days and hours of work are Monday through Friday, 6:00 am to 4:30 pm. Occasional evening and weekend work may be required as job duties demand. Work Conditions This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description Sales Professional Take Charge Of Your Career American Income Life is growing! We are seeking ambitious individuals who are driven to build their own business while also leaving a positive impact within the community they serve. American Income Life provides supplemental insurance coverage to labor unions, credit unions and associations in 49 states, the District of Columbia, Canada and New Zealand. We pride ourselves in providing a topnotch customer service experience while helping members of our community secure financial protection for their loved ones. We are searching for ambitious entry and senior level applicants to join our family of sales representatives. Benefits To You With state licensing taking as few as 10 days, a career with American Income Life can provide competitive compensation, advancement opportunities, independence, flexibility, performance incentives, awards, development programs and so much more. We have positions open now and we can conduct virtual interviews so you can schedule a personal interview from the comfort of your home. This is a 100% commission-only role. We believe hard work equals results. If you have a drive to succeed, a high-school diploma or equivalent and excellent people skills, we want to hear from you.

Applied Technical Services, LLC ("ATS" or the "Company") is a leading provider of critical testing, inspection, certification, and compliance services. The Company serves clients across a diverse set of large and stable end markets including manufacturing, power generation, aerospace, medical, and defense. ATS was founded in 1967 and is headquartered in Marietta, GA. Today the Company employs nearly 2,100 team members in over 95 locations across the United States. Our purpose is to create a safe and reliable world and our mission is to deliver assurance through precise technical and professional services. Summary: ATS is seeking NDT Level II Techs & NDT Assistants/Trainees to support our Jacksonville, FL office. Responsibilities/Duties: NDT Assistants/Trainees • Perform tasks as directed in order to prepare components or equipment for inspections., • Work alongside certified technicians to help complete projects and learn activities., • Interface with personnel to determine scope of work and work priorities in order to meet customer expectations., • Interface with personnel to determine scope of work and work priorities in order to meet customer expectations., • Help clean and organize equipment before, during, and at the completion of projects., • Document on job training experience as assigned by management., • Perform other job related tasks as assigned by supervisors. Responsibilities/Duties: NDT Level II Technicians • Perform examinations of materials in accordance with procedures, codes, standards, and specifications., • Be thoroughly familiar with the scope and limitations of the methods for which qualified and exercise assigned responsibility for OJT and guidance of trainees, • Interface with department managers and clients to determine scope of work and work priorities in order to meet customer expectations., • Be able to prepare written instructions and to organize and report the results of examinations., • Work independently and support team members Perform other job related tasks as needed and assigned by supervisors. Qualifications Minimum: Requirements/Qualifications: • NDT Assistants/Trainees High School Diploma, GED, or equivalent; math and print reading skills; ability to used computers for data entry and report writing; Applicants with documented prior NDT classroom training or OJT preferred., • NDT Level II Technicians Meet the minimum requirements of an NDT Assistant/Trainee; provide documentation of education, training, and experience in the applicable NDT method(s); have a working knowledge of industrial environments and general manufacturing processes; ability to effectively communicate with other departments, and customers to report issues and solve problems. All applicants require the following: • Ability to learn and comply with all company policies and procedures., • Excellent communication skills written and verbal., • Applicants must pass a drug screen and have a valid drivers license with a clean driving record., • U.S. Persons Only: A requirement of this position is access to information that is subject to U.S. export controls under the U.S. International Traffic in Arms Regulations (ITAR). Accordingly, the company will consider only U.S. Persons for this position. A U.S. Person includes (a) U.S. citizens or nationals; (b) U.S. lawful permanent residents (i.e., green card holders); (c) persons granted refugee status; or (d) persons granted asylum in the United States. This information is collected solely for purposes of complying with U.S. export control requirements and will not be used to unlawfully discriminate in the hiring process. Work Conditions: • Must be able to wear safety equipment as required by the safety department for personal protection., • Work from heights on scaffolding, ladders, elevated platforms, man-baskets, etc., • Work in confined spaces which will require crawling, stooping, climbing, etc., • Work in around operating equipment and industrial environments., • Work with radiation and hazardous materials such as cleaners, penetrants, film developing chemicals, etc., • Work shifts up to 12 hours/day and 7 days/week and travel for extended periods of time, • Ability to lift and carry 100 pounds. Benefits: ATS offers excellent wages and advancement opportunities. ATS full-time employee benefits include: medical, dental, vision, 401k, vacation, personal time, and bonuses. EOE/AA/M/F/Vet/Disabled Applied Technical Services is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

Applied Technical Services, LLC ("ATS" or the "Company") is a leading provider of critical testing, inspection, certification, and compliance services. The Company serves clients across a diverse set of large and stable end markets including manufacturing, power generation, aerospace, medical, and defense. ATS was founded in 1967 and is headquartered in Marietta, GA. Today the Company employs nearly 2,100 team members in over 95 locations across the United States. Our purpose is to create a safe and reliable world and our mission is to deliver assurance through precise technical and professional services. Summary: ATS is seeking Local NDT Level II Technicians and ND Trainees to support our Level II NDT work at ATS Cocoa. Any combination of Level II certs including MT/PT/UTSW/RT with select opportunities for Trainees. Hiring PERMANENT NDT Techs now for upcoming Fall Outage season and beyond. Responsibilities/Duties: NDT Assistants/Trainees • Perform tasks as directed in order to prepare components or equipment for inspections., • Work alongside certified technicians to help complete projects and learn activities., • Interface with personnel to determine scope of work and work priorities in order to meet customer expectations., • Interface with personnel to determine scope of work and work priorities in order to meet customer expectations., • Help clean and organize equipment before, during, and at the completion of projects., • Document on job training experience as assigned by management., • Perform examinations of materials in accordance with procedures, codes, standards, and specifications., • Be thoroughly familiar with the scope and limitations of the methods for which qualified and exercise assigned responsibility for OJT and guidance of trainees, • Interface with department managers and clients to determine scope of work and work priorities in order to meet customer expectations., • Be able to prepare written instructions and to organize and report the results of examinations., • Work independently and support team members Perform other job related tasks as needed and assigned by supervisors. Qualifications Minimum Requirements/Qualifications: • NDT Assistants/Trainees - High School Diploma, GED, or equivalent; math and print reading skills; ability to used computers for data entry and report writing; Applicants with documented prior NDT classroom training or OJT preferred., • Ability to learn and comply with all company policies and procedures., • Excellent communication skills written and verbal., • Applicants must pass a drug screen and have a valid driver's license with a clean driving record., • Must be able to wear safety equipment as required by the safety department for personal protection., • Work from heights on scaffolding, ladders, elevated platforms, man-baskets, etc., • Work in confined spaces which will require crawling, stooping, climbing, etc., • Work in around operating equipment and industrial environments., • Work with radiation and hazardous materials such as cleaners, penetrants, film developing chemicals, etc., • Work shifts up to 12 hours/day and 7 days/week and travel for extended periods of time EOE/AA/M/F/Vet/Disabled ATS is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

RELOCATE TO VIRGINIA OPPORTUNITY Join our esteemed team of healthcare professionals committed to advancing healthcare through cutting-edge research, comprehensive training, and compassionate care. UVA Health is an integrated health system with a world-class academic medical center that includes a level 1 trauma center, a level IV NICU, the first NCI-designated Comprehensive Cancer Center in Virginia, and UVA Health Children's, the #1 pediatric hospital in Virginia. UVA Health also encompasses three community hospitals, a specialty rehabilitation hospital, and an integrated network of primary and specialty care clinics throughout Virginia. UVA Health consists of UVA Health University Medical Center, UVA School of Medicine, UVA School of Nursing, UVA Claude Moore Health Sciences Library, UVA Community Health, and UVA Physicians Group. Through teaching and research, we continue to advance medicine and innovate excellence while providing high-quality care in communities across the state. An Exceptional Place to Call Home Nestled amid the picturesque Blue Ridge Mountains, Charlottesville and Albemarle County offer a welcoming community, rich cultural opportunities, and an enviable lifestyle. Enjoy award-winning culinary experiences, vibrant local music, and historic landmarks, surpassing many larger cities in charm and amenities. Charlottesville Accolades: * “#1 City in America” (Frommer's) * “Best Place to Live Among Small Cities” (Money magazine) * “Top 15 Happiest Places to Live in the U.S.” (Outside Magazine) * “Top Ten Cities That Have It All” (A&E TV) * “Top 10 Best College Towns” (WalletHub) * “#2 Best Small College Town” (WalletHub) * “Healthiest Place to Live” (Kiplinger) * “Hottest for Fitness” (Newsweek) * “Best Place to Raise a Family” (Readers' Digest) * “2023 Wine Region of the Year” (Wine Enthusiasts) * “Top 10 Greenest Cities” (Streetdirectory.com) * “Top 5 Best Digital Cities” (Center for Digital Government) * “Top 50 Best Places to Launch a Small Business” (Money Magazine) We offer competitive compensation, generous relocation assistance, an inclusive work environment, and opportunities for professional growth. Do you have the expertise and passion to contribute to our mission? * Professional Excellence: Thrive in a collaborative environment with access to state-of-the-art resources. * Comprehensive Benefits: Enjoy a robust benefits package designed to support your personal and professional well-being. * Career Development: Participate in continuous learning and development opportunities to advance your career. Click Apply Now to learn more about this opportunity at UVA Health.

Job DescriptionCirca Service-FL, we are a multi trade company. We are looking for an organized, experienced HVAC Technicians with exceptional diagnostic and problem-solving skills. You must work quickly and efficiently to solve problems and make necessary repairs. • Appliance Techs with long-term Residential HVAC Repair experience along with EPA Certifications will be considered as a top candidate for this position., • Apartment Maintenance Technicians with long-term Residential HVAC Repair experience along with EPA Certifications will be considered as well., • Commercial, Restaurant HVAC Repair with some Residential HVAC Repair experience, can be considered based on experience.Take your valued work experience to the next level and grow with our team as we grow our business in the area. Tired of getting the run around at your current position? Do you feel your hard work, determination, specialized skills and dedication are undervalued? Your valued experience will be rewarded accordingly. We are a performance-based company. We will pay you based on your performance and production. It’s that simple! Qualifications and Duties include, but not limited to: · Troubleshoot, Identify and repair malfunctioning systems and equipment (Necessary electrical components, Evaporator coils, Compressors, etc.). · Installation and replacement of parts and equipment. (Equipment at varying levels, from Coil replacement to Full systems) · Maintain communication with dispatch, your manager, parts and installation teams. · Keep your truck clean, inside and out. · Keep your truck inventory up to date. · Properly complete paperwork. · Join the on-call rotation. · Maintain a clean and professional appearance. · Have and maintain a clean driving record. · Participate in training allowing you to grow and develop as a professional. · Have or be willing to get the proper certifications. We can help you with this. What We Offer · Company supplied truck, take it home at night. · No overnight on-call · Competitive compensation and incentives · Support team to ensure your success · Paid holidays and vacations · Automated processes and scheduled in-house training Experience: · HVAC Technician: 3 years (Required) · Must hold state driver’s license · Must be punctual and adhere to a daily schedule with multiple appointments in different locations · Strong verbal communication skills, ability to explain complex HVAC issues with customers in a way they understand · The Big Task You will diagnose and repair residential HVAC systems and lead customers to informed and confident buying decisions. When needed, you will diagnose and repair residential Appliances that lead customers to informed and confident buying decisions. Job Type: Full-time • No on call at nightSalary: $45,000 - $80,000+ Schedule: • 8-hour shift, • Monday to FridaySupplemental pay types:, • Commission pay.License/Certification:, • Driver's License (Required), • EPA Certifications (Required)Expected hours: 40 per week Benefits: • Company truck, • Fuel card, • Paid time offSchedule:, • Monday to FridaySupplemental Pay:, • Bonus opportunities, • HVAC: 3 years (Required), • Appliance repair: 3 years (Preferred), • Plumbing: 2 years (Preferred)Work Location: On the road

RELOCATE TO VIRGINIA OPPORTUNITY Join our esteemed team of healthcare professionals committed to advancing healthcare through cutting-edge research, comprehensive training, and compassionate care. UVA Health is an integrated health system with a world-class academic medical center that includes a level 1 trauma center, a level IV NICU, the first NCI-designated Comprehensive Cancer Center in Virginia, and UVA Health Children's, the #1 pediatric hospital in Virginia. UVA Health also encompasses three community hospitals, a specialty rehabilitation hospital, and an integrated network of primary and specialty care clinics throughout Virginia. UVA Health consists of UVA Health University Medical Center, UVA School of Medicine, UVA School of Nursing, UVA Claude Moore Health Sciences Library, UVA Community Health, and UVA Physicians Group. Through teaching and research, we continue to advance medicine and innovate excellence while providing high-quality care in communities across the state. An Exceptional Place to Call Home Nestled amid the picturesque Blue Ridge Mountains, Charlottesville and Albemarle County offer a welcoming community, rich cultural opportunities, and an enviable lifestyle. Enjoy award-winning culinary experiences, vibrant local music, and historic landmarks, surpassing many larger cities in charm and amenities. Charlottesville Accolades: * “#1 City in America” (Frommer's) * “Best Place to Live Among Small Cities” (Money magazine) * “Top 15 Happiest Places to Live in the U.S.” (Outside Magazine) * “Top Ten Cities That Have It All” (A&E TV) * “Top 10 Best College Towns” (WalletHub) * “#2 Best Small College Town” (WalletHub) * “Healthiest Place to Live” (Kiplinger) * “Hottest for Fitness” (Newsweek) * “Best Place to Raise a Family” (Readers' Digest) * “2023 Wine Region of the Year” (Wine Enthusiasts) * “Top 10 Greenest Cities” (Streetdirectory.com) * “Top 5 Best Digital Cities” (Center for Digital Government) * “Top 50 Best Places to Launch a Small Business” (Money Magazine) We offer competitive compensation, generous relocation assistance, an inclusive work environment, and opportunities for professional growth. Do you have the expertise and passion to contribute to our mission? * Professional Excellence: Thrive in a collaborative environment with access to state-of-the-art resources. * Comprehensive Benefits: Enjoy a robust benefits package designed to support your personal and professional well-being. * Career Development: Participate in continuous learning and development opportunities to advance your career. Click Apply Now to learn more about this opportunity at UVA Health.

Job Description Seniors Paradise Homecare Agency LLC is looking for a Caregiver to join our team. The Caregiver is responsible for the physical care and emotional support of our clients who may no longer be able to take care of themselves due to illness, injury, surgery, or disability. The ideal candidate must be able to care for our clients and their property with dignity, patience, compassion, and respect. This person will encourage and remain empathetic to the clients at all times. Responsibilities: • Home assistance and Housekeeping: The caregiver will provide dusting, mopping, vacuuming, changing bedding, cleaning the bathroom, laundry, ironing, cleaning the kitchen and eating areas, taking out the garbage and cleaning other living spaces as required or requested from the client., • Companionship: One of the most important aspects of Seniors Paradise Homecare Agency LLC will be providing customers with a strong sense of compassion and encouragement., • Meals: Grocery shopping, preparing menus and meals, cooking, baking, serving, hydration, washing and drying dishes and general cleaning of the kitchen or eating area is included., • Transportation/Wellness Visits/Medication Reminder: The caregiver may drive their car or the clients car and transport a client to and from a doctors appointment or errands, the caregiver will make safety/wellness visits to check on the wellbeing of a client as well as the upkeep of their homes, the caregiver may be responsible to check a clients vital signs if needed and provide reminders to take medications. Requirements: • High school diploma preferred but not required., • Must be able to complete a Criminal Background check., • Ability to lift up to 25 pounds at a time, • Ability to reach, bend, kneel and stand sometimes., • Valid driver's license and reliable transportation About Seniors Paradise Homecare Agency LLC: Seniors Paradise Homecare Agency LLC is all about helping people, especially the elderly and children with developmental disability. I was aspired to open my own company when I used to take care of my 94yr grandmother who had dementia and then in her latter days had trouble walking. I have 13yrs experience as CNA. Our company is a family owned business for 4yrs. Seniors Paradise Homecare Agency LLC is a non skilled homecare agency dedicated to provide seniors with the services that allow them to choose an independent lifestyle in their own homes. Powered by JazzHR ylhYgyfUZl

Job Description BETTER MOBILITY FOR LIFE Savaria is a global leader in accessibility and patient care products, designing and building wheelchair lifts, stairlifts, elevators for home and commercial applications, medical beds, therapeutic surfaces, ceiling track lifts and patient slings. Savaria employs 2,450 valued associates globally and has 11+ manufacturing facilities to reach markets in North America, Europe, Australia, and Asia. SAVARIA PATIENT CARE Built from a heritage of brands including Span, Handicare and Silvalea, Savaria Patient Care provides products designed for safe patient handling and positive outcomes. Our research and clinically based product portfolio include therapeutic surfaces for pressure management and positioning, a complete range of innovative ceiling and floor lifts and slings. Savaria Patient Care is a division of Savaria Corporation, a global leader in accessibility. OVERVIEW: The Installation & Service Technician will be primarily involved with the installation, service and preventative maintenance of Handicare products throughout the U.S. This individual will be called upon to perform site surveys and installation audits. Whenever possible, the work performed by the individual would be billable against a particular revenue generating project. Occasionally, based on available service and installation workload, the technician may perform other duties as assigned in other areas of the business such as production, assembly and distribution. This position requires construction knowledge. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Perform installation of Handicare products. This includes but is not limited to resource allocation, customer and sub-contractor communication, expense tracking, final audit, etc. Products include, but are not limited to: ceiling track lifting systems, etc. Construction sites consist of hospitals and long-term care facilities., • Install ceiling track lift systems and other products per Handicare standards., • Perform on site surveys at prospective installation sites for the purpose of gathering all required information to plan and complete a ceiling track lift installation., • Perform on site audits of in progress and completed installations to ensure compliance with company standards., • Coordinate delivery of products and other installation materials to coincide with arrival of labor resources as needed on a project., • Arrange site storage for products and materials as needed for installation projects., • Keep accurate project records for expenses, various required testing, training etc., • Interact directly with owners and staff at Hospitals, Nursing Homes, private residences, Group Homes, etc. while performing the above functions, • Train the end users of the equipment on the operational aspects of the equipment sold and installed., • Perform service repairs and scheduled preventative maintenance as required., • Maintain the company service and installation vehicle in good operating condition and cleanliness., • Maintain the van inventory in an orderly fashion, at proper levels and account for all items used in the performance of service and installation functions., • Travel to out of state job sites as directed by supervisor, travel required up to 85% of the time., • Additional responsibilities as requested or required by management. SUPERVISORY RESPONSIBILITIES: • Identifies and resolves problems in a timely manner, • Able to read and interpret written information, • Able to deal with frequent change, delays or unexpected events., • Is consistently at work and on time., • Follows instructions, responds to management direction, • Takes responsibility for own actions, • Commits to long hours of work when necessary to reach goals, • Works quickly, • Observes safety and security procedures, • Determines appropriate action beyond guidelines, • Reports potentially unsafe conditions, • OSHA 10 Hour Certification required; OSHA 30 Hour Certification preferred. The employee may frequently stand, walk, climb, stoop, kneel or crouch during shift. Employee will be required to regularly use hands to finger, handle, feel and reach with hands and arms. Employee must be able to regularly lift, push, pull and or move up to 50 lbs. TRAVEL: • This position works in an environment with loud noise levels. This position may frequently work near moving parts, be exposed to vibration and be exposed to airborne particles & dust. This position will occasionally work in high, precarious places and be exposed to the risk of electrical shock. Savaria provides equal employment opportunities and consideration to all qualified employees and applicants, including disabled individuals and veterans. #savariapatientcare

Job Description Position Overview: The Restaurant General Manager is the executive leader of the restaurant focused on profitability, guest, people and operations. The RGM has overall responsibility for managing the daily operations of a single restaurant.The RGM operates under the direction of the District Manager and directly manages a team of an Assistant Manager, Hourly Shift Coordinators and Team Members (20-45 employees). Summary of Responsibilities: Profitability • Has primary accountability for the restaurant P&L and actively manages towards desired financial outcomes, • Reviews key P&L lines to increase profitability for the restaurant, • Motivates and directs team members to exceed guest expectations with accurate, friendly, and fast service in a clean facility, • Manages the guest experience through operations and timely response to Guest issues, • Problem solves guest feedback systems to determine root-causes and develops action plans to address issues, • Leads the restaurant’s recruitment and selection process to build and retain an effective restaurant team, • On-boards new team members by training and guiding them through the certification process, • Inspires the restaurant team by effectively managing individual and team recognition programs, • Manages restaurant labor using optimal Manager staffing and Team Member scheduling, • Enforces compliance with government regulations, employment laws and policies Qualifications and Skills: • Must be at least eighteen (18) years of age, • Must be proficient with Microsft Office and e-mail, • High School Diploma or GED required, 2 years of college preferred, • 1-2 years of previous restaurant management experience, • Strong understanding of P&L management & drivers of restaurant profitability, • Ability to prioritize own and others’ work and time to meet deadlines and objectives, • Demonstrated leadership skills, • Demonstrated understanding of guest service principles, • Available to work evenings, weekends and holidays, • Ability to work long and/or irregular shifts as needed for proper functioning of the restaurant

Overview *This job is located at the Jacksonville, FL location. * The successful candidate will contribute to oversight of nondestructive (NDT) being conducted at specific Electric Boat suppliers and distributed manufacturing facilities. This position will provide technical evaluation, guidance, and expertise in various NDT methods such as magnetic particle testing [MT], liquid penetrant testing [PT], visual testing [VT], and ultrasonic testing [UT]). Primary responsibilities are supplier on-site evaluations and audits, witnessing re-inspections, monitoring supplier NDT program administration, reviewing supplier NDT training and onboarding programs, and evaluating the overall health of each strategic sourcing supplier NDT program. Additional responsibilities will include: \n • Review, administer, and perform surveillances to ensure compliance with fabrication, welding, and NAVSEA NDT specifications.\n, • Maintain company standards, procedures, best practices, and process improvements in the field on NDT.\n, • Providing technical guidance and expertise with respect to manufacturing support and problem resolution.\n, • Interact with EB Strategic Sourcing Program Office, Suppliers, EB Engineering, EB Supplier Quality, EB Quality Assurance Engineering, EB Purchasing, EB Operations, EB COLUMBIA Program Office, EB VIRGINIA Program Office, Newport News Shipbuilding, SUPSHIP Groton, and NAVSEA as required.\n Travel is estimated to be 30% per work year. Qualifications Qualifications: Required: \n • High-school diploma or GED with appropriate related NDT certification(s) or experience.\n, • Presently or previously certified in multiple NDT methods as a Level II or III.\n, • A background in engineering or engineering support.\n, • Experience in Quality in an industrial environment, shipbuilding or other heavy fabrication.\n, • Familiarity with Military specifications (T9074-AS-GIB-010/271 and NAVSEA 250-1500-1).\n Skills \n • Applicant must be able to read, write, and interpret specifications, procedures, reports, and other documents\n, • Strong written and verbal communication skills are required to ensure effective interface with a variety of organizations.\n, • Strong organizational, analytical, and problem-solving skills in order to evaluate situations, make recommendations, and take prompt and effective action.\n, • Basic computer skills, including use of Microsoft Word, Excel, Access, and Power Point (or equivalent).\n, • Ability to serve as project lead or technical expert while witnessing inspections.\n, • Applicant must have the ability to understand basic principles of multiple NDT methods and applications to determine weld and base metal performance. \n, • Applicant should have the interpersonal and communication skills necessary to investigate problems by effectively asking questions, extracting necessary data from available sources, and working with others to determine root causes and implement appropriate solutions.\n Physical Qualifications Climbing, Kneeling

HNI Healthcare is seeking a Nurse Practitioner to join our hospitalist team as a Swing provider with Ascension/St. Vincent’s Medical Center Southside in Jacksonville, FL. Practicing NP’s are strongly preferred with inpatient experience are encouraged to apply. This opportunity features: • 330-bed acute care facility, • Closed ICU, • No procedures, codes or rapids, • Flexible schedule – 7 on / 7 off, • Swing shift 11 am – 11 pm, • Admitter role, • EMR - Cerner, • Jacksonville, Florida, with a population just under 1 million, is one of Florida’s fastest growing cities and home to 46,000-acre Timucuan Ecological Preserve. With more than 400 city parks, 7 state parks 2 national parks and dozens of gardens and arboretums, Jacksonville has the largest urban park system in the country., • A haven for fishermen, beach lovers, and boating enthusiasts, there are 27 miles of beach, 40 miles of intercoastal waterways, 50 public boat ramps and unspoiled barrier reefs., • Culturally, Jacksonville has world class Museums, performing arts; a visit to the Jacksonville Symphony or the Jacksonville Jazz Festival will leave music lovers speechless., • The Jacksonville Jaguars offers major league excitement, and the Arena and other venues are packed for many concerts and other events. HNI offers innovative technology and organizational excellence, but behind our data management and time-saving tools are experienced people; people who heal, people who listen, people who care. Resources, Training & Culture • HNI offers free CMEs to all providers at all levels of experience, • HNICORE ™ Program - training and thought leadership program, performance improvement and advancement, • Yearly HNI Clinical Academy – University of Texas at Austin –Dell Medical School - Available to each provider in person or virtual. Builds clinical excellence and camaraderie for each HNI Provider, • E&M University-Online Coding Education, EM evaluation and management, • Passion for delivering high-quality. value-based versus volume-based care., • Desire to be part of an organization committed to excellence., • Board Certified or Board Eligible MD or DO (IM or FM)., • Current, unrestricted Florida license to practice., • Current, unrestricted federal, and as needed, state prescriptive authority.

Job Description If interested, please send resume and high school diploma to: Simran.jeswani@allmedical.com Any questions? Please contact Simran Jeswani at 214-432-4721 Location: Jacksonville, FL Position: Medical Greeter/Entry level Phlebotomist (No Exp Required, training will be provided) Schedule: Mon-Fri from 6 am to 3 pm, Rotating Sat from 7 am to 12 pm. Payrate: $17.75/hr. The Patient Services Representative I (PSR I) represents the face of the company to patients who come in, both as part of their health routine or for insights into life-defining health decisions. The ENTRY PSR I helps with patient care by greeting them upon arrival and answering any questions or concerns with care and compassion. The individual will also help maintain the integrity of the waiting area and assist with breaks when other Phlebotomists are unavailable. This individual will also be trained on Phlebotomy skills to grown within the company. The ENTRY PSR I has direct contact with patients and creates an atmosphere of trust and confidence while explaining what to expect to patients regarding the scheduled procedure for the patients in a safe and accurate manner. The ENTRY PSR I will demonstrate excellence in customer care while focusing on process skills and sensitivity to confidentiality and accuracy of patient information. The impact of this individual will be crucial to maintaining the integrity of the lobby and ensuring that all patients are provided with the level of service that is expected. Under the direction of the area supervisor, perform daily activities accurately and on time. Maintain a safe and professional environment. Maintains required records and documentation. Demonstrates organizational commitment and promotes a positive image to patients, clients, employees and the public in general along with a willingness to learn new skills. Job Requirements: Ability to handle patients with care and compassion while assisting with check ins in the lobby through either a self-service kiosk or handheld tablet Be willing to learn Phlebotomy skills when there is downtime or breaks that need to be covered Once Phlebotomy skills are obtained, to perform with confidence, both the forensic and clinical specimen collection and processing duties following established practices and procedures. HIGH LEVEL OF CUSTOMER SERVICE EXPERIENCE/SKILLS ARE REQUIRED - this is critical to the heart of the role Required Education: High school diploma or equivalent REQUIRED Work Experience: Minimum of 1-2 years of client facing customer service REQUIRED (Retail, Home Health Aide, etc). Prior Phlebotomy experience is NOT required Keyboard/data entry experience a must. Company DescriptionAbout Us: All Medical Personnel is a national leader in healthcare staffing and recognized by Staffing Industry Analysts (SIA) as one of the nation's largest healthcare staffing firms. Our team of seasoned recruiters are experienced in their ability to recruit, screen and place medical professionals for all types of healthcare settings.About Us: All Medical Personnel is a national leader in healthcare staffing and recognized by Staffing Industry Analysts (SIA) as one of the nation's largest healthcare staffing firms. Our team of seasoned recruiters are experienced in their ability to recruit, screen and place medical professionals for all types of healthcare settings.

Job DescriptionDescription: Position Summary: Provides residents assistance with Activities of Daily Living (ADL) while recognizing the importance of their dignity and respect at all times. Essential Functions: • Provides quality care and assistance to residents in accordance with the resident philosophy and policies and resident rights, • Assists residents in meeting their physical, emotional and spiritual needs, • Adheres to each resident’s Level of Care (LOC), notifies supervisor of any changes in resident’s condition, • Answers and responds to resident calls in a timely manner, • Assists residents with Activities of Daily Living (ADL), • Checks residents every two (2) hours and reports findings, • Completes assignment sheets daily., • Encourages residents to attend meals in the dining room by escorting to and from Dining room, • Assists residents with meals in ways that meet their individual needs and desires, while being cognizant of changes in appetites and physical abilities to eat and drink, • Assists with cleaning and setting the dining room as directed by supervisor, • Assists with cleaning and tidying resident’s room as directed by supervisor, • Assists with resident’s personal laundry as directed by supervisor, • Establishes and maintains good relationships with residents and their families, • Disposes of all incontinent products according to OSHA regulations and Company policy, • Practices proper body mechanics when lifting following safety guidelines, • Responds to resident emergencies, • Works assigned schedule, • Follows proper procedure for clocking in and out for shifts, • Follows guidelines for uniforms and wears name badge daily, • Follows policy on signing equipment in and out, and uses Company assigned equipment properly as intended, • The ability to work in a safe and alert manner, • The ability to take ownership for associate’s safety and the safety of the residents, • Must disclose any medication that might impair associate’s ability to perform the job safely or competently. Non-Essential Functions: • Leads by example exhibiting the CORE Values through servant leadership, • Encourages teamwork and promotes company philosophy, • Attends required community meetings and participates Life Enrichment activities when able, • Completes all required courses in adherence with HRA University, • Is prompt and able to perform the required duties of the position on a regular, predictable basis, • Becomes familiar and understands how to report a missing person using the Safe Return program or equivalent, • Becomes familiar and understands the steps for fire evacuation, • All associates are responsible for maintaining a safe and secure environment for all community residents Requirements: Qualifications/Skills/Educational Requirements: • Must have a high school education, • Non-Certification with proper training, or possession of valid state certification as C.N.A., • 1 – 3 years experience in a senior care community or nursing home environment preferred, • Has a good understanding of how Dementia and Alzheimer’s Disease can affect behavior, • Able to communicate effectively with all levels of management, associates, residents, family members, and outside contacts, • Must possess a passion to work with and around senior citizens