Hydraulic jobs in Jersey City, New JerseyCreate job alerts

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of components. Additional responsibilities include: Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Performs all work in accordance with established safety procedures., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times., • Assists in the repair and adjustment of equipment., • Washes vehicles and equipment., • Conducts safety checks on vehicles., • Assists with service calls for breakdowns., • Perform other maintenance related work as required., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. Requirements and Qualifications::, • 3-5+ years’ experience as class A or B mechanic, • Computer diagnostic experience is required, • Prior experience from waste management industry or heavy equipment/yellow iron dealership experience is a plus, • Trade school or similar training is a plus, • Knowledge of safety procedures and practices Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $27.00/Hr. Salary Range Maximum: USD $32.64/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Level B Fleet Mechanic/Technician is a journeyman-level role responsible for independent diagnosis and repair of most mechanical, electrical, and hydraulic issues on refuse trucks, heavy trucks/tractors, trailers, and heavy equipment. This role also mentors Level C technicians, supports road calls, and ensures high uptime and DOT compliance for the fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Diagnostics & Repair • Independently diagnose and repair:, • Diesel and gasoline engines (intake, fuel, cooling, aftertreatment/emissions components)., • Drivetrain components including clutches, transmissions, differentials, PTOs, and drive lines., • Air and hydraulic brake systems, ABS, and suspension components., • Hydraulic systems on refuse equipment (packer bodies, arms, cylinders, pumps, valves, and hose routing)., • Electrical systems including starting/charging, multiplex wiring, sensors, and lighting. Preventive Maintenance & Compliance • Perform and sign off on DOT-compliant inspections and PMs, ensuring all safety-critical items are addressed and documented., • Accurately interpret and close out DVIR/eDVIR defects; communicate recurring defects to leadership for root-cause analysis., • Use OEM and aftermarket diagnostic software, service bulletins, and wiring schematics to troubleshoot complex issues. Road Calls & Operational Support • Respond to road calls and breakdowns throughout the NYC tri-state area; perform safe temporary or permanent repairs to return vehicles to service or coordinate towing as needed., • Communicate clearly with dispatch, supervisors, and drivers on repair status and estimated completion times. Mentorship, Training & Documentation • Guide and mentor Level C technicians on best practices, safety, troubleshooting, and proper repair methods., • Complete work orders thoroughly, capturing complaint, cause, correction, labor hours, and parts used., • Support continuous improvement initiatives for PM compliance, repeat repair reduction, and parts standardization. Requirements and Qualifications::, • High school diploma or GED required., • 3–5+ years hands-on experience as a diesel, truck, or heavy equipment mechanic/technician, including diagnostics and major component replacement., • Valid CDL Class B (or higher) with air brake endorsement strongly preferred to perform road tests and move equipment on public roads within NY/NJ/CT., • Demonstrated proficiency with hydraulic, pneumatic, and electrical systems., • Ability to read and interpret OEM service manuals, wiring diagrams, and hydraulic schematics., • Experience in refuse/solid waste, municipal, or LTL/heavy trucking fleet operating in urban environments preferred., • ASE certifications in Medium/Heavy Truck (T series) or Truck Equipment (E series); working toward Master status preferred., • Basic welding and cutting skills (MIG, stick, torch) for brackets, hangers, and minor body fabrication preferred., • Familiarity with computerized fleet maintenance and parts inventory systems preferred. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $28.80/Hr. Salary Range Maximum: USD $28.80/Hr.

Overview: Fuel Your Career with Us! Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work! Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. Schedule: Overnight Wednesday to Sunday 6pm to 5am. Essential Job Summary:: Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Performs all work in accordance with established safety procedures., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times., • Assists in the repair and adjustment of equipment., • Washes vehicles and equipment., • Conducts safety checks on vehicles., • Assists with service calls for breakdowns., • Perform other maintenance related work as required., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. Requirements and Qualifications:: • 2+ years’ experience working as a heavy-duty Diesel Mechanic, • Hydraulics experience is highly preferred, • Engine and transmission maintenance and repairs, • Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar., • Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components., • Maintain and repair exhaust systems equipped with DPF systems., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards., • Assists with service calls for breakdowns, • Must be able to provide own tools., • A valid driver’s license is required.Preform other duties as assigned. Additional Information: IWS is committed to providing a world class workplace to all employees. Each eligible employee receives a competitive total compensation package including, hourly pay based on experience and paid overtime, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Vacation, Holidays, and Personal Days. We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Salary Range Minimum: USD $24.41/Hr. Salary Range Maximum: USD $50.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of components. Additional responsibilities include: Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Performs all work in accordance with established safety procedures., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times., • Assists in the repair and adjustment of equipment., • Washes vehicles and equipment., • Conducts safety checks on vehicles., • Assists with service calls for breakdowns., • Perform other maintenance related work as required., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. Requirements and Qualifications::, • 3-5+ years’ experience as class A or B mechanic, • Computer diagnostic experience is required, • Prior experience from waste management industry or heavy equipment/yellow iron dealership experience is a plus, • Trade school or similar training is a plus, • Knowledge of safety procedures and practices Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $28.66/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Fleet Maintenance Supervisor is responsible for supervising a team of technicians and welders aimed at maintaining the locations equipment/fleet in peak operating conditions with the collaboration and guidance of the Fleet Maintenance Manager. They Provide direction to technicians, welders, and administrative personnel to ensure that all repair/ maintenance work is performed in a safe, efficient, and in a timely manner. The Maintenance Supervisor is responsible for preventative maintenance, and repair of company equipment, as well as administrative duties such as parts procurement, inventory management, asset tracking and cost control. The Maintenance Supervisor utilizes fleet management and onboard computing software to monitor vehicle performance and cost. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Provide direction to A, B, C level, and lead technicians assigned to work group to ensure that all repair and maintenance work is performed in a safe, efficient and timely manner., • Report to management on performance; make recommendations for process/programmatic changes for improvement or efficiencies., • Supervise technicians in maintenance shop, including such responsibilities as conducting daily shop huddles; yard checks; coaching/counseling/ training lead technician and all technician levels on performance/corrective action, when necessary; make hiring/termination decisions in concert with Human Resources and appropriate management; conduct employee training and performance evaluations; evaluate and make recommendations for merit increase, promotion and job changes, as appropriate., • Perform inspections of outside repairs to ensure all work was properly completed in accordance with Company’s safety and compliance procedures and federal and state regulations., • Identify training opportunities and document issues and constructively discuss corrective action, as needed, with technician., • Conduct Quality Control Inspections, track issues and resolution to ensure all work is properly completed in accordance with Company’s safety and compliance procedures and federal and state regulations., • Oversee repair diagnostics on more complex matters and provide coaching, when necessary; may be required to road test vehicles to determine necessary repairs., • Maintain advanced knowledge of engine, emission systems, transmission, brake, hydraulic and electrical systems to perform advanced preventive and repair maintenance functions on equipment and vehicles used by Company, on site and on the road, including: engine chassis repair and maintenance; knowledge of vehicle body control systems, including hydraulics and electrical systems to maintain and repair vehicles in a timely and safe manner; knowledge of heating and air conditioning systems to effectively diagnose and repair complex heating and cooling systems in vehicles in a timely and safe manner; and knowledge of welding tools to fix heavy equipment in a safe and efficient manner to ensure equipment is back in an operable condition as quickly and as safely as possible., • Manage related administrative matters for team, including payroll, maintenance of employee records, records of all preventive and corrective maintenance performed, recording of all information into TMT Maintenance Software. Requirements and Qualifications::, • 2+ year experience as a supervisor or foreman/team lead., • Must have experience with Electrical, Air Brakes, Medium and Heavy-Duty Diesel engines and computer aided diagnostics (CAT ET, Cummins Insite, Premium Tech Tool, etc.)., • Strong verbal and written communication skills, Spanish bilingual strongly preferred., • Advanced experience working with fleet management and onboard computing software., • Strong knowledge of DOT CMV rules, OSHA, and other federal and local regulations and requirement, • Valid driver’s license required, CDL preferred Additional Information: IWS’s base pay actually offered takes into account a range of factors including, but not limited to, internal equity, the candidate’s geographic region, job-related knowledge, skills, qualifications, and other business and organizational needs. Bonus: This role is bonus eligible as part of the compensation package. Benefits: IWS employees are eligible to participate in our benefits plan. Should an employee choose to participate, they can choose from a range of benefits to include, but is not limited to, health insurance, retirement savings benefits, paid vacation and holidays, as well as access to numerous voluntary benefits. Any coverages for health insurance and retirement benefits will be in accordance with the terms and conditions of the applicable plans and associated governing plan documents. This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $75,000.00/Yr. Salary Range Maximum: USD $95,000.00/Yr.

Staff Mechanical Design Engineer, EPC Locations: Reno NV Carson City NV San Francisco CA Medical, Dental, 401(k) Pay Range: $160-$200K The Mechanical Engineers is part of the Infrastructure Development team and is the Mechanical Engineer of Record on projects (Hazardous occupancy, clean and dry spaces, chemical process / industrial plants), responsible for mechanical and plumbing deliverables (specifications, calculations, permit / construction documents, construction administration) Responsibilities: • Design ownership for a wide range of mechanical and plumbing systems including: industrial/non-potable water, HVAC systems (labs, offices, industrial plants), process heating / cooling systems, humidifiers, dehumidifiers, abatement systems (dust collectors, scrubbers), cooling towers, fans/pumps, plumbing, etc., • Review conceptual designs from developing Engineers and identify technical and financial risks., • Responsible for designing/reviewing mechanical engineering deliverables with respect to code compliance and ensuring design maintains the highest level of quality., • Develop and improve project workflows and standards to ensure each design is consistently excellent., • Participate in on-field construction and commissioning activities by serving as the point of contact for technical questions and real-time issue resolution., • Multi-discipline collaboration on the development of equipment general arrangements, P&IDs, isometrics, tie-in lists and material takeoffs., • Travel to project site and meetings as needed.Desired Qualifications:, • 8+ years of work experience in HVAC and Plumbing/FP design., • Bachelor’s Degree in Mechanical Engineering or similar discipline., • Licensed Professional Engineer with NCEES record with ability to apply for NV and SC, • Expert familiarity with ICC including International Energy Conservation, Mechanical, Plumbing and Fire Protection Codes, NFPA standards, SMACNA duct construction standards, ACGIH Ventilation Practices and ASHRAE, • Expert in designing condenser fluid heat rejection systems, chillers, boilers, air handling units, air and water source heat pumps, dust collectors, humidifiers, dehumidifiers, fans, and pumps., • Experience with the following is preferred: Abatement systems (thermal oxidizers, dry and wet scrubbers), Heat Exchangers (shell/tube, plate/frame, brazed fin), Control Valves and Instrumentation, and Heat Recovery Systems., • Working knowledge of writing sequences of operation for HVAC and chilled water systems., • Ability to specify ductwork material and size for various ducted exhaust systems and pressure classes., • Ability to specify pipe material and size for various thermal hydronic systems., • Ability to create or edit construction specifications covering mechanical, process piping and plumbing systems., • Proficient in the use of AutoCAD required. Revit experience is highly preferred., • Experience sourcing and specifying mechanical equipment and executing RFP process., • Strong experience with engineering software packages: Pipe-Flo, AFT Arrow or other hydraulic modeling application, Caesar II, AspenTech applications and/or Applied Flow Technology applications, Carrier HAP, Trane Trace, Navisworks, Bluebeam.We are an Equal Opportunity Employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity, or any other legally protected status. All qualified applicants will receive consideration for employment without regard to any of these characteristics.PandoLogic. Keywords: Mechanical Design Engineer, Location: Woodside, NY - 11377

Job DescriptionBenefits: • Bonus based on performance, • Company car, • Competitive salary, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance This Is Not Your Typical Job Posting Most job ads are full of corporate buzzwords, vague promises, and a laundry list of requirements that dont tell you what the job is actually like. Thats not us. Were looking for the one person who reads this and thinks: Yeah I could do this, and Id fit in here. At PIRTEK Staten Island/Brooklyn West, we keep New Yorks equipment moving. From tugboats and shipyards to construction sites and industrial machines, when a hose blows or a machine goes down, work stops and were the ones who get the call to get it running again. Fast. This is hands-on work, real problem-solving, and real responsibility. If you want an easy, predictable desk job, this isnt it. If you want a career where your work actually matters, keep reading. Who We Are Were a tight-knit Staten Island crew. We work hard, we bust chops, and we argue about important things like who actually has the best pizza or bagels, and which New York team is going to inevitably break our hearts this season. Were NYC through and through, and we take pride in that. Our customers arent always easy, the work isnt always clean, the weather doesn't always cooperate and breakdowns dont care what time it is but thats exactly why they call us. A few things we take seriously: • Communication matters. With customers and with each other., • Processes exist for a reason. Following them keeps everyone safe and successful., • Respect is non-negotiable. For customers, teammates, and equipment., • We hustle and we get rewarded for it. Our best techs treat a customers equipment like its their own. That mindset is why most of our customers stick with us long-term. We believe in win-win-win: the customer wins, the company wins, and the tech wins. What Youll Actually Do This isnt a vague technician role. Heres the real work: • Drive a fully outfitted PIRTEK mobile service van across Staten Island and the greater NYC area, • Respond to on-site breakdowns, routinely on an emergency basis, • Diagnose, replace, and install hydraulic and industrial hoses, • Work on:, • Marine equipment, tugboats, and shipyards, • Construction equipment, • Industrial machinery, • Machine servicing and cylinder repair, • Be part of the on-call rotation (yes, nights and weekends happen and yes, youre paid extra for it), • Communicate clearly with customers explaining whats wrong and what itll take to fix it, • Keep your truck, tools, and paperwork in order so youre always ready to roll You Might Be a Fit If • You like working with your hands and figuring things out, • You hustle and dont need to be babysat, • You can stay calm when a customer is stressed and a machine is down, • You communicate well problems dont get ignored here, • You respect processes and understand they protect you, • Youre mechanically inclined (cars, boats, heavy equipment, machines it all helps but specific experience isn't required), • You dont mind dirt, grease, tight spaces, or being on your feet, • You have a valid drivers license and can pass a background and drug check No hose experience? No problem. We provide hands-on training and 24/7 technical support. Training & Growth • 46 weeks of structured training, • Then youll be trusted to run your own service calls, • Over time, youll gain specialized repair knowledge (marine, cylinders, advanced diagnostics), • Strong performers can move into Lead Tech roles within 1224 months, • This is a career path, not a dead-end job Pay & Benefits • $25$30/hour depending on experience, • Commission-based sales incentives and performance bonuses, • Paid on-call premiums, • Company vehicle and phone, • Health benefits: medical, dental, and vision, • Paid time off and holidays, • Ongoing certified training and growth opportunities The Bottom Line This job isnt for everyone and thats intentional. But if you want: • Real responsibility, • Real skills, • Real earning potential, • And to be part of a crew that actually has your back Then PIRTEK Staten Island/Brooklyn Westmight be the right move for you.

Job Description We are seeking a CDL B Driver to join our team! You will be responsible for safely operating a Garbage truck equipped with a hydraulic system and stick shift transmission (manual). Responsibilities: • Safely operate a heavy garbage truck, • Load and unload cargo and tools., • Properly track and document activity log, • Report any issues or incidents to dispatch, • Inspect truck before and after trip Qualifications: • Previous experience in truck driving or other related fields, • Commercial driver's license - class B, • Clean driving record is a must, • Experience with Stick shift transmission (manual / non-automatic), • Ability to handle physical workload, • Strong work ethicCompany DescriptionInterior demolition contractor in NYC

We are looking for an experienced Sidel Blow Molder Mechanic with strong hands-on experience operating, troubleshooting, repairing, adjusting, and maintaining Sidel blow molding equipment in a beverage, bottling, PET packaging, or manufacturing environment. Key Requirements: • Hands-on experience with Sidel Blow Molders (SBO, Matrix, Universal, Series 2, or similar models)., • Strong mechanical troubleshooting and repair experience., • Experience performing machine changeovers, startups, adjustments, and preventive maintenance., • Ability to troubleshoot mechanical, pneumatic, hydraulic, and basic electrical issues., • Experience reducing downtime and supporting efficient production operations., • Ability to work independently with minimal supervision., • Experience in beverage, bottled water, plastics, PET packaging, or similar manufacturing environments preferred., • Previous experience as a Sidel Field Service Engineer or Sidel Service Technician is a plus.

Maintenance Mechanic Opportunity / $28-$35 Per Hour / Great Benefits and Growth Opportunity This Jobot Job is hosted by: Jack Campbell Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $28 - $35 per hour A bit about us: A well-established plastics injection molding manufacturer in the Hartville area is seeking an experienced Maintenance Mechanic to join their 1st shift team. This individual will be responsible for keeping molding machines and plant equipment running efficiently while ensuring safe, consistent production. The ideal candidate brings a strong mix of mechanical, electrical, and injection molding maintenance experience. Why join us? $28–$35/hr starting pay, based on experience. 1st shift schedule with overtime opportunities. Comprehensive benefits package (medical, dental, vision, retirement). Stable, growing company with a clean and well-maintained facility. Supportive leadership and a collaborative maintenance team. Job Details Key Responsibilities Perform preventive and corrective maintenance on injection molding machines, auxiliary systems, and plant equipment. Troubleshoot 480V electrical systems, control panels, VFDs, sensors, and PLCs (Allen-Bradley or Siemens preferred). Diagnose and repair hydraulic and pneumatic systems, pumps, valves, and cylinders. Assist with mold changeovers, machine setups, and adjustments. Support continuous improvement and downtime reduction initiatives. Maintain detailed maintenance records and adhere to all plant safety standards. Qualifications Minimum 3+ years of maintenance experience in a manufacturing setting (plastics industry strongly preferred). Hands-on experience with injection molding machinery (e.g., Engel, Milacron, Arburg, Husky, Nissei). Solid understanding of electrical, mechanical, hydraulic, and pneumatic systems. Ability to read blueprints, electrical schematics, and mechanical drawings. Strong troubleshooting skills and commitment to preventive maintenance. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Tank Builder / Welder (Nationwide) Day to Day Duties: • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members., • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • You’ll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR MTXaL0TXT6

Job Description Wrought Iron Fabricator Job Type: Full-time Location: Brooklyn, NY 11207 (in person) Position: Wrought Iron Fabricator Energy Fencing Inc. is New York’s premier fencing company, proudly operating under the motto “With energy, anything is possible.” Our commitment to excellence, reliability, and customer satisfaction drives us to deliver top-quality fencing installations, gates, and custom ironworks. We are seeking an experienced Wrought Iron Fabricator to join our growing team. The ideal candidate will possess strong welding and metal fabrication skills, experience working with ornamental iron and miscellaneous metals, and a commitment to producing exceptional craftsmanship. This role is responsible for fabricating custom gates, fences, railings, window guards, bollards, security barriers, and specialty metalwork for commercial, municipal, industrial, and residential projects. The successful candidate must be able to read and interpret shop drawings, perform accurate layout and fit-up work, operate fabrication equipment safely, and maintain high standards of quality throughout the fabrication process. This position requires a detail-oriented professional who takes pride in producing finished products that meet project specifications, customer expectations, and Energy Fencing's quality standards. Key Responsibilities Metal Fabrication: Fabricate custom wrought iron fences, gates, railings, window guards, security barriers, bollards, decorative ironwork, and other miscellaneous metal products in accordance with approved shop drawings, project specifications, and company standards. • Layout & Fit-Up: Measure, mark, cut, notch, cope, drill, and assemble metal components accurately to ensure proper fit, alignment, and dimensional compliance prior to welding and finishing., • Welding & Assembly: Perform MIG, TIG, Stick (SMAW), and Flux Core (FCAW) welding on steel, aluminum, and miscellaneous metal components as required. Produce clean, structurally sound welds that meet quality and appearance standards., • Blueprint & Drawing Interpretation: Read and interpret shop drawings, fabrication details, blueprints, sketches, material schedules, and specifications to accurately fabricate products according to design requirements., • Equipment Operation: Safely operate fabrication equipment including welding machines, ironworkers, band saws, chop saws, drill presses, grinders, hydraulic presses, forklifts, and other shop tools necessary to complete fabrication activities., • Metal Finishing: Grind, sand, polish, straighten, and prepare fabricated assemblies for galvanizing, powder coating, painting, or final installation. Ensure all finished products meet company quality and aesthetic standards., • Quality Control: Inspect fabricated products throughout the manufacturing process to verify dimensions, weld quality, material accuracy, fit-up, functionality, and overall workmanship. Identify and correct deficiencies before products leave the shop., • Material Handling & Inventory: Assist with receiving, organizing, storing, and tracking raw materials, hardware, and fabricated products. Verify material quantities and report shortages, defects, or discrepancies to management., • Installation Support: Coordinate with field installation teams to ensure fabricated products are delivered complete, accurate, and ready for installation. Assist with field modifications and troubleshooting when required., • Equipment Maintenance: Perform routine maintenance and care of welding equipment, fabrication machinery, hand tools, and shop equipment. Report repair needs and maintain equipment in safe working condition., • Shop Organization: Maintain a clean, organized, and efficient work environment. Properly store materials, tools, and finished products while ensuring walkways and work areas remain safe and free of hazards., • Safety Compliance: Follow OSHA regulations, company safety policies, hot work procedures, personal protective equipment (PPE) requirements, and safe material handling practices at all times. Promote a culture of safety and accountability throughout the fabrication shop., • Team Collaboration: Work closely with shop supervisors, project managers, estimators, and installation crews to ensure fabrication schedules, production goals, and project deadlines are achieved. Qualifications • Minimum 3 years of experience in wrought iron fabrication, miscellaneous metals fabrication, welding, or a related metalworking trade (required)., • Proven experience fabricating ornamental iron fences, gates, railings, window guards, security barriers, bollards, stair systems, and custom metal products., • Proficiency in MIG, TIG, Stick (SMAW), and Flux Core (FCAW) welding processes., • Ability to read and interpret shop drawings, fabrication details, blueprints, material schedules, and project specifications., • Strong knowledge of metal fabrication techniques including layout, measuring, cutting, drilling, coping, fitting, assembly, grinding, and finishing., • Experience operating fabrication equipment including welding machines, ironworkers, band saws, drill presses, grinders, chop saws, hydraulic equipment, and other shop tools., • Ability to accurately measure, fabricate, and assemble components while maintaining tight tolerances and high quality standards., • Strong understanding of welding symbols, fabrication standards, material types, and fabrication best practices., • Experience working with steel, aluminum, stainless steel, and ornamental iron products preferred., • Experience fabricating custom gates, automated gate systems, railings, fencing systems, and miscellaneous metal fabrications preferred., • Ability to perform quality control inspections and identify fabrication or welding deficiencies before products leave the shop., • Strong attention to detail and commitment to craftsmanship, quality, and productivity., • Ability to work independently and as part of a fabrication team in a fast paced production environment., • Working knowledge of OSHA regulations, welding safety requirements, and proper use of personal protective equipment (PPE)., • Forklift certification or experience operating material handling equipment preferred., • AWS Welding Certification preferred but not required., • Ability to lift and move materials weighing up to 75 pounds and perform physically demanding fabrication work., • English proficiency (required)., • Must be located in NYC or within 25 miles of Brooklyn, NY 11207., • Ability to commute to Brooklyn, NY 11207 (required)., • Authorized to work in the United States. Work Environment • Shop-based fabrication environment., • Occasional field measurements and installation support as needed., • Fast-paced production environment with multiple ongoing projects., • Compensation & Benefits, • Salary: $25–$30 per hour (commensurate with experience), • Compensation Package: Overtime opportunities, performance bonus, yearly bonusBenefits:, • 401(k), • Paid time off (10 PTO days), • Professional development opportunities, • Schedule, • 8-hour shifts, • Day shift, Monday–FridayEnergy Fencing Inc. is an equal opportunity employer. We encourage applicants from all backgrounds to apply.

Description HRG is an employee-owned, nationally recognized consulting engineering, planning, and infrastructure solutions firm. We are actively seeking a Senior Water & Wastewater Project Manager to join our team of talented professionals in Pittsburgh, PA. As a Water & Wastewater Senior Project Manager, you are responsible for: • Managing environmental water/wastewater projects, • Preparing project designs and reports, • Preparing and administering construction contracts, • Managing financial resources and project profitability, • Completing project permitting requirements, • Client relationship management and development activities, • Communicating with other HRG staff as needed to ensure projects are completed timely and on budget, • Providing project review, QA/QC, and compliance to client specific requirements Additional areas of responsibility may include: • Assisting with staff training, • Providing recommendations to supervisor regarding staffing requirements Requirements • Bachelor of Science degree in Civil Engineering with environmental emphasis, • Pennsylvania P.E. licensure, • 10+ years' project experience involving:, • Design of water distribution and treatment systems, • Wastewater collection, conveyance, and treatment systems and processes, • Hydraulics, • On lot systems, • Environmental assessments, • Minimum 5-10 years project management experience, • Ability to provide timely project deliverables, • Develop and maintain excellent client satisfaction, • Intermediate proficiency in Microsoft Office Suite, • Previous experience with:, • Computer modeling of water systems, • Hydraulic design software, • PA DEP regulations, • Holds a valid Driver's License to travel to job sites, meetings, and other offices, • Has the legal right to work in the U.S. Desired Qualifications • Previous experience with Deltek Vision/Vantagepoint, • Previous marketing experience Life at HRG Are you a creative problem solver who wants to make a difference in people’s everyday lives? Find out why it’s _ : • Work with Purpose & Impact: Our people design roads, bridges, water and sewer systems. They reduce pollution and protect environmental resources. They prepare sites for new homes, businesses, schools, and gathering spaces. They develop strategic plans and connect leaders to the funding they need to turn vision into reality. Join us, and use your talent to enhance safety, promote health and well-being, connect people and places, and build strong economies in the community around you., • Comprehensive Compensation & Benefits: HRG offers a generous total rewards package including bonuses and other cash rewards, 401(k) with company match, Employee Stock Ownership Plan, medical, dental, vision, short- and long-term disability, life insurance for you and your dependents, general paid time off, paid parental leave, pet insurance, and more., • 100% Employee Ownership: Every member of the team shares in the firm’s financial success through the company-funded employee stock ownership plan (ESOP), but ownership means so much more to us at HRG. It’s about communicating transparently, being accessible, and empowering everyone to contribute their ideas., • Bright Opportunities for Growth: HRG has experienced steady annual growth over the past decade, adding new services and new territories across the tri-state area. We have a detailed path to continue that growth in the decade to come, and our people are the foundation of that plan. We provide ample training, mentorship, and peer networking opportunities, so you can continue to evolve your skills and take on new challenges. We also provide generous reimbursement for continuing education, licensure and certifications, and professional memberships., • Freedom and Flexibility to Define Where and When You Work: You have many goals: professional and personal. At HRG, you’ll be able to pursue them all. Our team has incredible flexibility to adjust their schedule around their life, start the weekend early with Half-Day Fridays, and do their work at home, in the office or any combination they choose., • Fun, Supportive Environment: HRG has a One Company mindset focused on collaboration and shared success, not competition. Our founders set out to create an enjoyable workplace, and their vision continues today with regular potlucks, picnic lunches, team building retreats, and friendly games., • National Recognition: HRG’s people and projects have won 100s of awards, including ENR MidAtlantic’s Design Firm of the Year. _, • Great Place to Work: We’ve been honored numerous times as a Top Workplace, Employer of the Year, and one of the Best Places to Work in PA. Join us in driving future business while fostering a culture that values every team member's contributions. Apply now to be part of a company that truly values its people

The Hope Group, A SunSource Company, is New England’s leading provider of fluid power and motion control solutions for original equipment manufacturers (OEMs) and MROs. The Hope Group has over 100,000 square feet of warehousing, fabrication, and administration facilities to complement its manufacturing capacity. We’re more than a parts distributor. Our customers rely on us to help identify and solve the efficiency and productivity challenges they face. _ If you’re a motivated, technically savvy sales professional who enjoys solving complex challenges and building long-term customer relationships, this is an opportunity to grow your career with an industry leader. This role will cover a sales territory in Western Mass and Eastern NY • Develop and grow a defined sales territory through a combination of new business development and account management, • Plan and execute strategic sales calls with existing and prospective customers using CRM tools, • Identify customer needs and deliver tailored motion control and fluid power solutions, • Prepare and present proposals that clearly communicate value and drive results, • Build strong, consultative relationships with customers, becoming a trusted advisor, • Collaborate closely with inside sales, engineering, and customer service teams to ensure an exceptional customer experience, • Conduct on-site product demonstrations and Lunch & Learns with customers and vendor partners, • Partner with manufacturer representatives on joint sales calls and business development efforts, • Actively uncover cross-selling opportunities across divisions to expand customer partnerships, • Participate in ongoing product and sales training to continuously build technical expertise, • Proactively resolve customer concerns and ensure high levels of satisfaction, • Bachelor’s degree or technical degree in Engineering, Mechanical, Electrical, or related field (preferred), • 2+ years of outside technical sales experience (fluid power or industrial sales preferred), • Certified Fluid Power Specialist (CFPS) is a plus, • Experience with or knowledge of Parker products is a strong plus, • Understanding of hydraulic, pneumatic, electrical, or mechanical systems and motion control applications, • Ability to identify, specify, and recommend solutions based on customer needs, • Strong communication, relationship-building, and problem-solving skills, • Self-motivated, results-driven, and comfortable working independently in a field-based role, • Proficiency with CRM systems and Microsoft Office, • Valid driver’s license with a clean driving record, • Some overnight travel will be required, • Competitive compensation + commission potential, • Company vehicle, phone, and laptop provided, • Comprehensive benefits package, • Training and professional development opportunities, • Backed by SunSource, a national leader with strong supplier partnerships, • Opportunity to build your book of business and make a direct impact We are an Equal Employment Opportunity Employer M/F/V/D. WE PARTICIPATE IN E-Verify. If you are an individual with a disability and require an accommodation to complete the application process, please contact to request reasonable accommodation. Only requests for accommodations in the application process will be returned. #thgasscWe may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

SunSource and its family of companies represent 200+ locations and 3,000+ employees making up one of North America’s leading value-add industrial distribution companies. We provide customers with products and solutions within Fluid Power, Fluid Process, Fluid Conveyance, General Industrial Components, and Industrial Service & Repair. www.sun-source.com Are you a solutions-focused sales professional with hands-on fluid power experience? Do you thrive on solving complex hydraulic and motion control challenges for industrial customers? Join our Fluid Power team in Sterling Heights, MI, where your expertise drives real results for OEMs, manufacturers, and industrial operations. • Take full ownership of a defined industrial/OEM territory, • Solve real technical challenges with hydraulic, pneumatic, and motion control solutions, • Leverage inside sales, technical support, and engineering expertise to win business, • Grow your pipeline, customer base, and earning potential in a high-demand industry, • Develop and execute a strategic territory growth plan with guidance from your District Sales Manager, • Build and maintain relationships with engineers, plant managers, maintenance teams, and purchasing decision-makers, • Identify and capture new business opportunities, while growing existing accounts, • Provide application expertise and technical guidance for fluid power solutions, • Partner with inside sales and technical teams to deliver value-added solutions, • Manage your pipeline, forecast, and territory performance using CRM and sales tools, • 3+ years of B2B industrial or fluid power sales experience (hydraulics, pneumatics, motion control, OEM focus preferred), • Hands-on knowledge of fluid power systems, components, and troubleshooting, • Strong track record of new business development and account growth, • Excellent communication and presentation skills, • Self-motivated, highly organized, and able to manage a territory independently, • Bachelor’s degree, technical diploma in fluid power, or equivalent industry experience, • Proficiency with CRM tools and Microsoft Office, • Valid driver’s license and ability to travel within the territory, some overnight travel may be required, • Industry competitive compensation / performance-based commission, • Comprehensive benefits: medical, dental, vision, 401(k) with company match, • Paid vacation and holidays, • Tuition reimbursement and ongoing professional development, • Mileage reimbursement, • Opportunity to work with a trusted brand and nationwide support network, • At SunSource, your technical expertise and consultative selling skills are rewarded. Join a team where your work directly drives customer success and your own career growth. We are an Equal Employment Opportunity Employer M/F/V/D. WE PARTICIPATE IN E-Verify. If you are an individual with a disability and require an accommodation to complete the application process, please contact to request reasonable accommodation. Only requests for accommodations in the application process will be returned. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Stanley Consultants is an award-winning and industry-leading global consulting engineering firm, with an unmatched commitment to culture, values, and ethics. We are dedicated to client experience and solve the most complex challenges to create a sustainable, connected, and enriched world for all. As the world changes, Stanley strategically evolves with it, integrating the latest technology, innovation, and resiliency practices. With over a century of experience serving the energy, federal government, transportation, and water sectors, we have helped improve lives and shape the infrastructure systems that connect us. As an employee-owned organization with a People First approach, we stand apart from other engineering consulting and services firms. At Stanley, your voice counts, your growth matters, and your success is our success. Stanley Consultants offers flexible work options, competitive pay and great benefits, a strong sense of community, and the chance to build a meaningful, long-term career! Job Title - Principal Engineer, Water/WastewaterLocation - Cedar Rapids, IA | Des Moines, IA | Iowa City, IA | Muscatine, IAJob Type – Hybrid, Onsite Stanley Consultants is seeking a Principal Water/Wastewater Engineer for one of our following Iowa offices: Cedar Rapids, Des Moines, Iowa City, or Muscatine. In this role, you will lead and deliver water, wastewater, and groundwater projects in the State of Iowa. This individual will be responsible for the development and management of all aspects of municipal water and wastewater utility system project planning, design, and services during construction. • Water distribution, transmission, and storage, • Water treatment, • Wastewater conveyance and peak weather flow infrastructure, • Wastewater treatment, • Water Reuse, • Pump Stations, • Hydraulic modeling, • Asset management, • Risk and resiliency consulting and design, • Smart water system planning, design, and implementation, • Lead the team for delivery of water and wastewater projects., • Provide guidance and career advice for water and wastewater staff in the Iowa offices., • Assist in marketing business opportunities with key clients, including capture planning, proposal preparation, and interview preparation and participation., • Participate in local water and wastewater professional organizations and preparing, coordinating, and presenting market specific papers and presentations., • Bachelor of Science in Civil Engineering/Environmental Engineering., • At least 7+ years of relevant water/wastewater engineering experience., • At least 5+ years of experience at the project manager level., • Iowa Professional Engineer (PE) license, or ability to obtain within 6 months of hire., • Technical management of water/wastewater project delivery experience., • Experience with the development and maintenance of close client and staff relationships., • Ability to execute the creative approaches to project delivery., • Master of Science (MS), • Membership in AWWA; WEFStanley’s Approach to FlexibilityWhile some members choose to work out of their local office on a full-time basis, we offer a hybrid schedule for eligible positions consisting of two days a week in the office, two days a week remotely, and Friday being a flexible day that can be worked either in the office or at home. Eligible roles can also offer a compressed workweek schedule. Members who participate will be assigned a 9/80 work schedule, meaning every other Friday off! What we offer:Member-Owned. Member-ownership is at the heart of our culture, aligning client satisfaction, company performance, and personal reward.Work-Life Balance. We realize there’s more to life than just work.Paid Time Away. Stanley Consultants offers numerous paid holidays, generous paid time off (PTO), parental leave, and professional development leave.Health Portfolio. We provide a comprehensive portfolio of health services including medical, dental, vision, FSA, HSA, Doctor On Demand, wellness reimbursement, and mental health resources.Financial Health. We offer life insurance, short- and long-term disability insurance, identity theft protection, and many other benefits.Professional Growth. When your skills grow, so do we, which is why we offer tuition assistance, professional society membership, and more.Financial Rewards. We share our prosperity with members through company stock ownership, a generous 401K match, incentive compensation, and profit-sharing contributions to retirement 401K plans. Learn more about Stanley Consultants in this short video: Stanley Consultants does not welcome unsolicited resumes from staffing and recruiting agencies. Any unsolicited resumes submitted to Stanley Consultants, including but not limited to resumes submitted directly to Stanley Consultants members, or any of our representatives, will be deemed the property of Stanley Consultants. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR _(c)

Job Description HiFyve is hiring a Heavy Equipment Mechanic in the construction repair industry in Bronx, NY! Salary: $55.18 – $60.19/hour Shift: 1st shift, 7:00am – 4:00pm Location: On-site in Bronx, NY Job Duties and Responsibilities • Troubleshoot, diagnose, and repair heavy construction equipment, with a focus on CAT equipment, • Perform mechanical, hydraulic, and electrical repairs in accordance with service standards, • Utilize diagnostic software and technical documentation to identify and resolve issues, • Plan and execute efficient repair procedures to meet or exceed labor guidelines, • Document all troubleshooting steps, repairs performed, and service communications accurately, • Efficiently use tools, parts, and technical resources to minimize downtime and cost, • Communicate repair status, findings, and recommendations with supervisors, • Follow all safety policies and participate in required safety meetings, audits, and training, • Maintain a clean, organized, and safe work area in compliance with contamination control initiatives Education Requirements • High school diploma or equivalent required, • Technical or vocational training in heavy equipment or diesel mechanics preferred Knowledge, Skills and Abilities: • Proven experience troubleshooting and repairing heavy construction equipment, • CAT equipment experience preferred, • Strong mechanical, hydraulic, and electrical diagnostic skills, • Computer proficiency to run diagnostic software and prepare service documentation, • Excellent verbal and written communication skills, • Ability to plan, prioritize, and complete tasks efficiently with minimal supervision, • CDL license preferred, • Ability to lift up to 60 lbs., work in physically demanding environments, and perform tasks requiring climbing, kneeling, crawling, and extended reaching, • Ability to work outdoors in varying weather conditions while wearing required PPE If you are interested, please apply

Job Description About Mendon Mendon Truck Leasing & Rental is a full-service commercial truck leasing and maintenance company serving fleet customers throughout the region. Our Hicksville Long Island branch supports a diesel operation focused on safety, reliability, and keeping our customers on the road. We are currently hiring one experienced diesel mechanics with hands-on heavy-duty or fleet diesel experience. What You’ll Do Depending on classification (Class A or Class B), responsibilities include: • Diagnose and repair diesel engines and related systems, • Perform transmission, driveline, and differential repairs, • Service steering, suspension, brake, axle, frame, electrical, hydraulic, and refrigeration systems, • Complete preventive maintenance inspections, • Read and interpret job orders, • Accurately document repairs using computer-based repair order systems, • Test drive commercial vehicles to verify repairs (CDL license), • Perform roadside service when required Class A mechanics work independently on complex diagnostics and repairs with limited supervision. Class B mechanics perform most repairs with direction and support on more advanced assignments. Qualifications • Proven heavy-duty diesel truck experience required, • Strong diagnostic and troubleshooting skills, • Ability to communicate clearly, verbally and in writing, • Comfortable using a computer to complete repair documentation, • Valid driver’s license required, • CDL preferred (role includes operating commercial vehicles for testing and roadside service), • Must provide own tools Compensation $35-37 Schedule/ Location Hicksville Long Island AM Shift: 8:30am-5:00pm Benefits Company benefits include: • Paid time off, • Group insurance plans Why Join Mendon This is a stable, long-term opportunity within a structured union environment. Our Hicksville shop is hands-on and team-oriented. If you take pride in quality diesel repair work and want steady employment with benefits, we would welcome the conversation. WORKING CONDITIONS: Shop, office, yards, vehicle environment, may require lifting of 50 to 75 lbs. CDL driving 8:30am-5:00pm

Job Description We are currently looking for a Crane Operator who has working knowledge of Lattice Boom Crawler or Large Hydraulic Crane. Preferably someone with at least five years experience working in a shipyard. The position would also include supervising the laborers that are working and making sure that the work that has been designated to them is being done. The hours would be from Monday-Friday 7:30am-4:00pm with potential for overtime. References are a must. Wages are determined upon experience. EOE

Job DescriptionDescription: Steinway & Sons is seeking an experienced Maintenance Manager for our manufacturing plant in Astoria, Queens. This role is responsible for day-to-day supervision of union maintenance personnel, ensuring safe, reliable operation of production machinery and facility systems. This role is hands-on, highly visible on the production floor, and critical to maintaining uptime, safety, and regulatory compliance in a high-profile automated manufacturing environment. Main Responsibilities: · Oversee upkeep and maintenance needs of the office and factory space · Supervise maintenance activities supporting automated production equipment, CNC machinery, robotics, dust collection, and finishing operations · Act as first responder to equipment breakdowns; troubleshoot mechanical, electrical, PLC, and robotic issues · Create and implement preventative maintenance schedules for machinery and equipment. Designate work assignments to internal maintenance and external contractors and ensure jobs are completed to high standards and that all equipment and tools are well maintained to meet production needs. · Proactively seeks out waste of resources and initiates actions to improve methods and reduce costs. · Assign daily work and emergency repairs based off facilities needs · Ensures that health and safety policies are complied with, through thorough safety trainings for all employees and conducting site safety assessments to identify all safety hazards. · Monitor equipment and parts inventory, working with vendors to manage orders, pricing, and services. · Ensures involvement of the Maintenance Department to support ongoing capital projects. · Track expenses and oversee the budget for maintenance. · Deliver strong operational performance by ensuring compliance with regulatory agency standards and programs (local, city, and state). Maintains a variety of manual and electronic files related to facilities inspections and compliance reporting. · Assists in the selection of new hires as well as on going coaching, development, and discipline of current union maintenance staff. Requirements: · At least 5 years of industrial maintenance experience and at least 2 years of supervisory experience · Able to analyze, plan and solve problems · Able to read prints and drawings and have solid math and mechanical aptitude · Familiar with CMMS systems, Robotics ( Fanuc / ABB ) and PLC’s ( Allen Bradley / Siemens ) · Able to communicate effectively with diverse groups · Must have good working knowledge of OSHA regulations and practices · Must have broad experience and familiarity with building systems (HVAC, electrical, mechanical, hydraulic/pneumatic, fire safety) · Must have or be able to acquire required certificates of fitness from FDNY to maintain the plant · Must be able to maintain all permits to operate equipment and air permits with all government agencies (DEP, DEC, EPA) The estimated annualized base salary range for this role is $80,000-$95,000. Compensation will vary based on skills and experience. This role also offers re-location assistance if applicable. New employees are eligible to participate in a robust benefits package on the first day including medical, dental, vision, FSAs, generous 401k contribution, paid holidays, vacation and sick leave, professional development, and more.

Job Description Job Responsibilities: Assist Plant Engineer/Director and President in all aspects of machine/facility maintenance and repair. Mature and experienced capability to Order and stock parts for both PM and repairs. Execution of all PM as required and respond to emergency breakdowns. Ability to read and interpret prints, schematics and flow charts for electrical, pneumatic, hydraulic, mechanical diagnostics, installation and repairs. Familiarity with Flexographic slitting and laminating machinery a plus. Capability to run and organize basic machine shop. Ability to repair and fabricate some parts as needed. Job Qualifications: Mid to High level machine tool & preventative maintenance experience required Minimum of 5 years of industrial maintenance experience Understands basics of electrical, mechanical, fluid power and control systems Demonstrated ability to analyze and perform basic electronically, and mid to high level mechanical, pneumatic and hydraulic repairs A team player that is a highly disciplined, problem-solver with a strong work ethic Familiarity with Flexographic slitting and laminating machinery a plus. Minimum: Associates Degree or equivalent Trade School training. Able to lift and carry products and/or equipment of up to 50 lbs and access locations from sub-floor to rooftop, crawl space to catwalk. Hours: minimum 40 per week. Facility open 2 shifts however most work M-F 8-4 Package to be negotiated with experience level. Company DescriptionCompany was founded in 1946. It is family owned and operated by second generation who grew up in the business. Owner is present and hands on for over 50 years. Small, concise, located in a mixed industrial/residential area of NYC, the business is close to subway and freeways. Company is committed to sustainability in environment as well as keeping jobs in the USA. Labor workforce is Union and several employees 30 years employment. Willing to work with local independent contractors who have their own LLC.Company was founded in 1946. It is family owned and operated by second generation who grew up in the business. Owner is present and hands on for over 50 years. Small, concise, located in a mixed industrial/residential area of NYC, the business is close to subway and freeways. Company is committed to sustainability in environment as well as keeping jobs in the USA. Labor workforce is Union and several employees 30 years employment. Willing to work with local independent contractors who have their own LLC.

Job Description As a Diesel Truck Mechanic specializing in heavy-duty trucks, you will join a small team dedicated to maintaining and repairing Freightliner, Mack, and International vehicles. This role focuses on ensuring optimal engine performance, brake system reliability, and overall vehicle safety, with limited customer interaction. Proficiency in diagnostics and preventive maintenance is essential to support operational efficiency in a fast-paced environment requiring flexibility in scheduling. Responsibilities • Perform diesel engine repair and routine maintenance on heavy-duty trucks, • Conduct diagnostics and troubleshooting using Jaltest software and other tools, • Replace parts and repair hydraulic hoses as needed, • Test and maintain drum and disc brake systems, including DEF system maintenance, • Execute preventive maintenance to avoid breakdowns and ensure vehicle safety, • Document maintenance and repair activities accurately, • Collaborate effectively within a small team of 2-5 mechanics Required Qualifications • Minimum 2 years of experience in diesel truck mechanics, • Strong knowledge of diesel engine repair and hydraulic systems, • Proficiency in brake system maintenance, including drum and disc brakes, • Skilled in preventive maintenance and problem-solving, • High attention to detail and ability to manage time efficiently, • Flexibility to work nights and weekends as needed Preferred Qualifications • Technical Certificate in Diesel Mechanics, • Commercial Driver's License (CDL)Company DescriptionLeading energy infrastructure company providing fuels that keeps the the "city that never sleeps" running.Leading energy infrastructure company providing fuels that keeps the the "city that never sleeps" running.

Job DescriptionPOSITION SUMMARY: The Municipal Engineer is a professional with 7+ years of experience. This individual will design, manage and/or represent a variety of infrastructure projects (owned by municipalities and local school districts). PRIMARY DUTIES: • Responsible to act as the client manager to one or more municipalities or other public agencies. The client manager will act as the single point of contact between the firm and the client. He/she will supervise and coordinate all projects performed in the firm on behalf of the client, to the client’s satisfaction., • Develop or implement engineering solutions to assist clients with improving and maintaining their infrastructure., • Design transportation, utility, facility, or hydraulic systems or structures (as appropriate) using computer assisted design or drawing tools., • Compute load and grade requirements, water flow rates, or material stress factors to determine design specifications., • Estimate quantities and cost of materials, equipment, or labor to determine project feasibility., • Analyze survey reports, maps, drawings, blueprints, aerial photography, or other topographical or geologic data., • Conduct studies of traffic patterns or environmental conditions to identify engineering problems and assess potential project impact., • Perform all design activities ensuring compliance with environmental, safety, or other governmental regulations., • Identify environmental risks and develop risk management strategies for projects., • Attending regularly scheduled public meetings (conducted by Municipal clients) in the capacity of Municipal Engineer, or Land Use Board Engineer. Prepare and present public reports on topics such as bid proposals, project status reports and developmental review projects., • Provide technical advice to clients regarding design, construction, or capital program modifications., • Support of the field activities of our construction inspection staff, including providing timely data, shop drawing review, and client coordination. KNOWLEDGE, SKILLS and ABILITIES: • Municipal Engineering experience preferred but not required., • Strong oral and written communication skills, • Ability to make public presentations., • Ability to define problems, collect data, establish facts and draw conclusions to present to co-workers and clients., • Strong organizational skills and attention to detail, • Knowledge of computer aided design software., • Ability to work in groups as well as individually.EDUCATION/EXPERIENCE:, • Bachelors of Science Degree in Civil Engineering from an accredited four-year college or university CERTIFICATIONS/LICENSES REQUIRED • PE License Required PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasionally lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Job DescriptionAre you ready to join a growth-oriented team where creativity meets innovation? At Ware Malcomb, we are a dynamic and forward-thinking design firm committed to pushing the boundaries. Our team-oriented, collaborative approach ensures that every project is a blend of visionary design, seamless project delivery, and we are actively engaged with both the community and the industry. Discover our vibrant culture to get an inside look into life at Ware Malcomb and the programs we offer. https://waremalcomb.com/life-at-ware-malcomb/ As a Senior Plumbing & Fire Protection Engineer at Ware Malcomb, you will play a pivotal role in delivering comprehensive building engineering solutions to diverse clients. You will lead the design and successful delivery of complex projects from concept through completion. Your expertise will support the full project lifecycle, covering plumbing and fire protection system design. Your Role • Apply fire protection engineering principles through investigation and analysis to support engineering projects, including the design of fire suppression systems such as sprinklers, standpipes, fire pumps, water supply systems, and special hazard extinguishing systems., • Apply plumbing engineering principles through investigation and analysis to support engineering projects, including the design of domestic hot and cold water systems, sanitary waste and vent systems, and related plumbing infrastructure., • Develop fire protection & plumbing concepts, strategies, construction documents and engineering reports for new buildings, and renovation projects., • Provide fire protection and plumbing engineering design services for various commercial facility types., • Ability to complete fire protection hydraulic calculations using industry software programs., • Develop construction and installation plans, specifications, and updating infrastructure layout plans that require coordination with owners, architects, other disciplines, sub-consultants, and clients., • Prepare data and visualizations such as tables, charts, accurate reports, sketches, calculations, technical drawings, spreadsheets, and illustrations for the interpretation or presentation of data, findings, or analyses., • Maintain quality control standards and procedures for accurate and precise measurements, statistical analysis, and reporting., • Prepare technical reports and presentations that explain research, findings, and recommendations to improve, prevent, control, restore, or address design and/or construction issues or opportunities., • Assist in the analysis, evaluation, and interpretation of data obtained during site investigations, offering input with developing action plans for moderate- to high-level risk installation, equipment and system operations, and/or mitigation activities., • Interact with regulatory agencies, subcontractors, architects, and clients in a confident and professional manner., • Remain current in latest plumbing & fire protection engineering techniques and practices., • Maintain client relationships., • Verify compliance with applicable codes and engineering standards and practices., • Work with other architecture and engineering design professionals in the coordination and delivery of projects., • Provide support services during construction, including submittal reviews, response to requests for information and contract document clarifications, construction progress inspections and acceptance testing., • Lead coordination efforts between engineering disciplines and project stakeholders., • Assist in maintaining an environment that supports individual achievement and professional growth of team members., • Assist with the preparation, maintenance, and development of Engineering Standards., • Review drawings and project documentation to improve quality, consistency, and technical accuracy.Qualifications, • Bachelor's Degree (B.S. or B.A.) from a four-year college or university (ABET Accredited)., • 7+ years of related experience and/or training., • Experience working on Fire Protection projects in New York City is preferred., • Professional Engineer (PE) registration is preferred., • Ability to comprehend, analyze, and interpret complex business and technical documents., • Strong communication and interpersonal skills to effectively convey complex ideas through writing and presentations while motivating teams and negotiating with stakeholders to achieve strategic outcomes., • Advanced analytical and problem-solving abilities with the capacity to interpret complex information and evaluate multiple solutions in dynamic situations.This is a full-time, long-term position. Established in 1972, Ware Malcomb is a dynamic, forward-thinking commercial real estate design firm providing professional architecture, interior design, civil engineering, branding, building measurement, structural engineering and MEP engineering services to clients throughout the world. With office locations throughout the United States, Canada, Mexico and Brazil, the firm specializes in the design of office, industrial, science & technology, healthcare, multifamily, retail, hospitality and public/institutional projects. The firm is also ranked among the top 10 Architecture/Engineering firms in Engineering News-Record’s Top 500 Design Firms and the Top 30 Interior Design Firms in Interior Design magazine’s Top 100 Giants. For more information, visit waremalcomb.com.

Job DescriptionBenefits/Perks • Competitive Compensation, • Career Advancement OpportunitiesJob Summary We are looking for a skilled and experienced Plumber to join our team! In this role, you will perform diagnostics, service, and installation of plumbing in commercial and light residential environments You are a Plumber with a commitment to quality in all the work you do. A team player who is comfortable working independently and with others, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities • Assemble pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, soldering, brazing, or welding equipment, • Install pipe assemblies, fittings, valves, appliances such as water heaters, or fixtures such as sinks and toilets, using hand or power tools, • Perform maintenance of water supply systems, • Install and maintain gas and liquid heating systems, • Professionally interact with customers and clearly communicate work orders and statuses, • Work 8 hour shifts 8am-4:30pm, • On call on weekends once a monthQualifications, • Valid Drivers License, • Minimum 5 year of professional experience, • Strong knowledge of hydraulic systems, • Ability to handle plumbing tools and equipment

Job Description Hazen and Sawyer is seeking an Engineer for our HVAC/Plumbing/Fire Protection (H-P-F) group in New York City, White Plains, or Hicksville offices. As part of our HVAC/Plumbing/Fire Protection (H-P-F) teams the ideal candidate will work within Hazen and Sawyer’s H-P-F Discipline Group and can expect to work closely with experienced Engineers to perform system designs. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals. Key Responsibilities: Workload will focus on municipal water and wastewater projects including planning, preliminary and final designs, and providing engineering services for projects in construction. It is preferable to have experience in the H-P-F systems related to water and wastewater facilities, although relevant experience in municipal, industrial or commercial buildings and facilities is acceptable. The candidate should enjoy learning and working within a team environment. Required Qualifications: • Bachelors of Science degree in Mechanical Engineering is preferred., • Ability to communicate well both orally and in writing., • Two (2) – twenty five (25) years of experience in designing heating, ventilating, cooling, plumbing, and/or fire protection systems (design for municipal, commercial, or industrial facilities is preferred)., • A PE license, or plans of obtaining their PE license, is preferred., • Experience with Revit is preferred., • Relevant areas of experience include:, • Application of various types of heating, ventilation, air conditioning, and hydronic piping systems, • Ductwork sizing and design, • Heating and cooling load calculations, • Hot water boiler and chilled water system design, • HVAC controls systems and building/facility management systems, • ASME B31.1 Power Piping or ASME B3.9 Building Services Piping designs, • International Mechanical Code, Plumbing Code and Fire Code, • Performance of detailed HVAC and hydraulic pressure drop calculations, • Performance of Plumbing pipe sizing and fixture count analysis, • SMANCA Duct Construction Standards, • NFPA 13, Standard for the Installation of Sprinkler Systems, • NFPA 820, Standard for Fire Protection in Waste Treatment and Collection Facilities What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job DescriptionPRS Auto is seeking a safety-conscious Mechanic at the Norfolk Southern Doremus, NJ Rail Terminal auto facility in a recession-proof industry! This operation is responsible for unloading new automobiles off of railcars. You will be employed directly through PRS Auto and will not be an employee of the railroad. Hours:This is a 24/7/365 operation. This role is a full-time salary position working non-standard hours that may include nights, weekends, and holidays as required by the Customer. Occasionally, the role can require extended work hours, including being on call as needed. Candidates: • Should have a minimum of 2 years of experience in the mechanical field and be preventative maintenance minded., • Must have own tools (Yearly tool allowance provided)., • Must have experience and knowledge working with Air, Electrical, Hydraulic, and Diesel systems and components., • Will need a valid driver's license. Primary Responsibilities: • Diagnose and Repair Buck Ramps (Automobile railcar unloader ramps), • Preventive Maintenance., • Welding, fabricating., • Working on gasoline engines, diesel engines, hydraulics, & Electrical components., • Assist in other areas as needed by managers., • Must have verifiable mechanical experience., • Candidates must undergo a background check., • Must be able to pass a physical strength test., • Drug screening., • Required to join local union. Salary / Benefits: • Salary is commensurate with experience and will be discussed during the interview process, • Growth Opportunities + Incentives, • Affordable Healthcare, Free Dental, and cheap Vision Benefits., • Free Life Insurance, • Generous 401K plan, • Yearly Raises, • Bi-Weekly Pay, • Travel Opportunities, • Union Position, • As well as much more you'll find out when you join our team. Terminal Location: PRS Auto (NS Doremus Railroad) 861 Doremus Ave.Newark, NJ. 07105. Work EnvironmentCandidates must be able to work outdoors in all conditions, including hot temperatures. In addition, working on and around rail equipment and automobiles may be dangerous if not handled safely concerning the job functions. Understanding the work hazards and being able to work safely is imperative for this position. All qualified applicants will be given equal consideration regardless of race, age, sex, disability, sexual orientation, gender identity, marital status, color, religion, protected veteran status, or national origin.

Job DescriptionWe, at Pacific Rail Services, are looking for an experienced Diesel Mechanic for a full-time permanent position in our Bergen, NJ rail terminal in a recession-proof industry. You will be employed directly by Pacific Rail Services and will not be considered an employee of the Railroad. Work Location: CSX North Bergen Terminal 6201 Tonnelle Ave North Bergen, NJ 07047 Compensation: • Hourly pay with yearly income potential of $45,000-$60,000 per year (Which includes overtime), • Pay rate is commensurate with experience. Shift: Day shift, 24/7 call out avail Candidates: • Should have a minimum of 2-year experience in the mechanical field and be preventative maintenance minded., • Must have own tools (Yearly tool allowance provided)., • Must have experience and knowledge working with Air, Electrical, Hydraulic and Diesel systems and components., • Will need a valid driver's license. Primary Responsibilities: • Diagnose and repair forklifts, company vehicles, and hostler fleet., • Maintain Hostler Fleet, • Assist in other areas as needed by managers. Applicants for this position must meet the general requirements for employment with the company, according to the Company hiring process which include: • A valid Driver's License., • Advanced knowledge of railroad industry from a vocational education institute, apprenticeship, on the job training and/or similar work experience. • Must be able to pass a 7-year background check. Any felonies in the last 7 years of jail time in the last 5 years will disqualify applicants., • Must be able to pass a hair follicle drug test., • Must be able to pass an IPCS Physical Capabilities Test., • (No GED or diploma required). Benefits: • Health, Dental, and Vision Benefits, 401K, paid time off after 90 days., • Yearly Raises., • Mandatory overtime., • This position gives you the opportunity to work outside. You will be employed directly by Pacific Rail Services and will not be considered an employee of the Railroad.

Job Description Taylor Northeast is the mid-Atlantic and New England’s premier dealer of forklifts, container handlers, railcar movers, industrial floor cleaning machines, and much more. Headquartered near Reading, Pennsylvania with multiple branch facilities from Baltimore to New Hampshire, we sell, rent, service, and rebuild a range of custom and heavy-duty material handling equipment that is unlike any other company in the industry. And we are fortunate to have an equipment lineup that is backed by the best service technicians and parts support teams in the Northeast. We are seeking an experienced Field Technician - Mechanic for Central New Jersey area to service various types of forklifts. The ability to work, think and operate independently is a must. RESPONSIBILITIES: • Inspect, diagnose and service heavy lift equipment (diesel, electric or LP fueled) to diagnose technical problems, • Determine required repairs, • Maintain equipment service records, • Conduct regular preventative maintenance tasks on-site at customers' locations, • Test mechanical equipment after repair or assembly to guarantee proper performance and compliance with the manufacturers' specifications REQUIREMENTS: • Hydraulic experience necessary, • Diesel experience necessary, • Strong electrical aptitude necessary, • Must have clean, safe driving record, • Prior mechanical and technical experience on large mobile equipment preferred, • Applicant must be able to pass a pre-employment drug test, physical exam and background check BENEFITS • Competitive salary commensurate with experience, • 401(k) with company match, • Health insurance (majority paid by company), • Dental insurance, • Vision insurance, • Life insurance, • Flexible schedule, • Employee Referral program, • Weekly pay schedule ABOUT US Taylor Northeast is proud to be a flagship member of the H&K Equipment Group, a fast-growing network of four operating companies that employs hundreds of experts at businesses located throughout the US. Our companies’ primary specialties include full-service, cradle-to-grave coverage of heavy-duty and customized material handling equipment. From the nation’s busiest ports, to its largest mills, to its biggest infrastructure projects, you’ll find our equipment wherever you find materials on the move. Learn more about the power of our teams at taylornortheast.com. We are an equal opportunity employer. Powered by JazzHR G3xbxWGN3f

Job Description Staff Management Group is seeking an Industrial Machine Mechanic for our client in East Rutherford, NJ. Please read the ENTIRE job description and ALL of the job requirements BEFORE applying for this position. Schedule: • 1st Shift: 7AM - 3:30PM, • Monday - Friday, • Some weekends, • Plus overtime Pay Rate: • $28 - $30 / hour Job Summary: We are seeking a skilled Industrial Machine Mechanic to inspect, troubleshoot, repair, and maintain industrial machinery and equipment. This role requires strong mechanical and electrical knowledge, the ability to work with fluid systems, and experience dismantling and rebuilding equipment to ensure safe and efficient operations. The ideal candidate is dependable, detail-oriented, and available to work overtime when needed. Job Responsibilities: • Visually inspect machinery and equipment and troubleshoot issues as needed, • Dismantle defective machines and equipment and install new or repaired parts, • Clean and lubricate shafts, bearings, gears, and other machine components, • Install and repair electrical components such as transformers, wiring, and related part, • Repair plumbing and piping systems including air and hydraulic systems, • Operate cutting torch and welding equipment to cut or join metal parts, • Perform preventive maintenance to minimize downtime and equipment failure, • Follow safety procedures and ensure work is completed according to company standards, • Maintain a clean, organized, and safe work area, • Assist with additional maintenance tasks as assigned Job Requirements: • MUST be bilingual - English AND Spanish, • Trade/Technical School certification or equivalent experience preferred, • Minimum 3 years of related maintenance experience required, • Strong mechanical and electrical troubleshooting skills, • Ability to read and interpret blueprints, safety rules, and maintenance instructions, • Ability to troubleshoot mechanical and fluid equipment, • Forklift certification required, • Must be available to work overtime when necessary Additional Information Staff Management Group is an equal employment opportunity employer, and all qualified applicants will receive consideration for employment without unlawful discrimination based on race, color, creed, national origin, sex, age, disability, marital status, sexual orientation, or citizenship status. About Staff Management Group: Staff Management Group has over 30 years of experience placing staffing candidates in distribution, manufacturing, production, assembly, and clerical positions. Staff Management Group is one of New Jersey’s leading staffing and recruiting agencies specializing in light industrial and clerical staffing. Come join the team! #IND1

Job Description Union Beer Distributors is a family-run beer distributing company that supplies the highest quality beers available across the northeastern United States. Owned and operated by the same family for the past century, our company places unparalleled value on the strong relationship we have with our customers. As a result, we maintain a fine lineup of world-class products, and even more importantly, a strong team of world-class people. Fleet Mechanic Wanted for the 2nd shift (2pm - 10pm) - TO INQUIRE OR FOLLOW UP ON YOUR APPLICATION - Please do not call the main number. Send an email to UBOpsrecruiter@unionbeerdist.com What you’ll be doing: • Repair trucks, cars, and other company machinery as required, • Provide for the general maintenance requirements of the plant as necessary, • Inspect all vehicles to ensure that the vehicles meet state safety requirements, • Perform preventative maintenance on vehicles to minimize vehicle down time, • Maintain mechanical certifications as required EQUIPMENT USED TO PERFORM ESSENTIAL FUNCTIONS: • Electric and hydraulic tools, • Forklift, • Truck and/or automobile What you will need to succeed: • High School diploma or GED, • Class A License or willing to obtain, • Prepare written repair orders daily, • Some computer skills CRITICAL PHYSICAL REQUIREMENTS: • Two handed lifting, handling, carrying 40 lbs. from floor to overhead on a frequent basis, • Two handed lifting, handling, carrying 100 lbs. from floor to 48" on an occasional basis, • Sustained squatting, kneeling, stooping and bending Why join us? • We offer FULL HEALTH BENEFITS, • Overtime Potential $, • Paid vacation time & Holidays, • Flex Spending Accounts, • Cell phone discounts are available., • Growth & development opportunities, • Employee Wellbeing Program, • Tuition Assistance Program, • Discounted Pet Insurance, • Personal technology and cell phone plan discounts, • Supplemental Plans available: Disability, Life Insurance, Legal & Identity Protection This description is not intended as a written or implied contract and may be revised by the company at any time. Furthermore, no verbal contract by the supervisor or other company representative is binding, and employment is at the company. -COMPANY OVERVIEW- Come Join the Union Beer Family— Union Beer Distributors is representative of the market in which we operate. Energetic, dynamic, diverse, competitive, and growing. We are looking for candidates to develop themselves professionally in this marketplace by demonstrating a high capacity to learn and take on new challenges. The Sheehan Family Companies are proud to be an equal opportunity employer. We believe in an inclusive culture that provides mutual respect with salary advancement based on merit and individual performance. Sheehan Family Companies is committed to equal employment opportunities and does not discriminate against any protected class. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. *In applying for this job and providing your phone number, you are authorizing the Sheehan Family Companies to contact you via text message for recruiting purposes. You may opt out of text messaging at any time.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Control Systems Engineer to support the design and integration of the control system for the Integrated Eos Stellarator. This role will contribute to subsystem control definition, distributed control implementation, dynamic modeling, and advanced control development across plant and machine systems. The Control Systems Engineer will work closely with subsystem teams, vendors, and collaborators to develop control logic, interface definitions, model-based analyses, and implementation packages that support reliable and scalable operation of Eos. This position is intended for a strong hands-on controls engineer who can bridge advanced control methods and practical plant implementation. The role is expected to grow with the program and may expand over time toward broader subsystem ownership or architecture responsibilities.Key Responsibility Areas: • Develop control strategies, operating modes, control narratives, and sequence logic for assigned Eos subsystems., • Support distributed control system design through preparation of control logic diagrams, I/O architecture, design-basis documentation, and subsystem interface definitions., • Build and maintain dynamic models of plant and subsystem behavior using MATLAB, Simulink, Python, or similar tools to inform control design, operating setpoints, and transient analysis., • Support design and tuning of classical and advanced control algorithms for thermal, fluid, electrical, and process systems., • Coordinate with internal subsystem owners and external vendors to translate design requirements into implementable PLC, DCS, HMI, and supervisory control solutions., • Prepare technical documentation including block diagrams, interface descriptions, validation plans, control philosophies, and test support packages., • Contribute to integration of control functions across power supply systems, cryogenic systems, vacuum systems, utilities, plant support systems, and future plasma-related control interfaces., • Support verification, commissioning preparation, issue resolution, and design reviews during conceptual and preliminary design phases.Ideal Experience & Skillsets: Required Qualifications: • Bachelor’s, Master’s, or Ph.D. degree in Electrical Engineering, Mechanical Engineering, Control Systems, Nuclear Engineering, Physics, or a related discipline., • Two or more years of experience in control system development for complex industrial, energy, process, nuclear, aerospace, or scientific systems., • Strong background in dynamic system modeling and control design, including classical and modern control methods., • Strong proficiency with MATLAB and Simulink., • Experience with Python or other technical programming environments., • Familiarity with PLCs, DCSs, HMIs, SCADA, or other industrial control environments., • Ability to prepare and communicate technical documentation clearly across cross-functional engineering teams., • Strong written and verbal communication skills and the ability to operate effectively in a multidisciplinary organization. Preferred Qualifications: • Experience with first-of-a-kind energy systems, advanced reactors, fusion systems, or other high-reliability engineered systems., • Experience with vendor coordination and implementation oversight for control logic or subsystem controls., • Experience with MIMO control, optimization-based control, robust control, estimation, or data-driven control methods., • Familiarity with Linux, Git, and configuration-managed engineering workflows., • Experience with thermal-hydraulic, power system, or process system dynamic modeling., • Exposure to safety-related control functions, interlocks, or regulated plant environments. Company Benefits: • Salary range $120,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Position Overview: We are proud to support our nation's Veterans by offering career opportunities that value military training, discipline, and technical expertise. As a Diesel Technician, you will leverage the skills acquired during your military service to diagnose, repair, and maintain diesel engines and heavy-duty vehicles. This position is exclusively for U.S. Military Veterans who have received an Honorable Discharge. Key Responsibilities: • Perform routine maintenance and inspections on diesel engines and heavy-duty vehicles., • Diagnose mechanical, electrical, and hydraulic issues using diagnostic tools and technical manuals., • Conduct engine rebuilds, component overhauls, and part replacements with precision., • Interpret work orders and technical documentation to determine repair procedures., • Maintain accurate service records and ensure documentation complies with company and regulatory standards., • Utilize military-level discipline and attention to detail in every repair or service task., • Adhere to all OSHA and company safety procedures., • Collaborate with team members to ensure efficient workflow and maintain high operational readiness., • Communicate effectively with supervisors and team leaders regarding job status and repair needs. Requirements Requirements: • Must be a U.S. Military Veteran with an Honorable Discharge (documentation required)., • Proven experience working on diesel engines during military service (e.g., tanks, tactical vehicles, generators, transport trucks)., • Ability to read and interpret service manuals, schematics, and technical bulletins., • Familiarity with hand tools, power tools, and diagnostic equipment., • Strong problem-solving and mechanical aptitude., • Physical ability to lift heavy objects, stand for extended periods, and work in various environments., • Valid driver’s license (CDL is a plus). Preferred Qualifications: • MOS/Rating background in mechanical fields such as (but NOT limited to):, • 91B (Wheeled Vehicle Mechanic – Army), • 3521 (Organizational Automotive Mechanic – USMC), • CM (Construction Mechanic – Navy), • 2T3X1 (Vehicle Maintenance – Air Force), • Diesel or automotive technician certifications (ASE, OEM-specific, etc.)., • Experience with military or civilian fleet maintenance operations., • Completion of a military technical school or SkillBridge program. Benefits Why Join Us? • Veteran-friendly workplace culture, • Competitive pay and comprehensive benefits, • Continued training and advancement opportunities, • Transition support and mentorship from fellow Veterans, • A mission-driven environment where your service is respected and valued

Job Description RVE (an Ardurra company) is seeking a Project Manager – Municipal Engineer to join our team in Secaucus, New Jersey. Municipal engineers design projects that improve the quality of life for those in the communities they serve. J.C. Remington, an early visionary in the industry, formed what is now RVE with the mission to deliver excellent client service by solving challenges faced by local municipalities. Over the last 120 years, we have we have served as Engineer of Record to Municipalities, Engineer and Planner to Municipalities and their Planning, Zoning and/or Land Use Boards, Board Consultant and Floodplain Manager. Our team members include professional engineers, professional planners (AICP), licensed surveyors, GIS professionals, certified flood plain managers, environmental engineers and construction managers and inspectors. Our full-service staff provides the complete breadth and depth of consulting services including professional design, planning and construction services for infrastructure capital improvements; environmental remediation; utilities collection and distribution; treatment design; public facility additions and renovations; park and recreation improvements; redevelopment and master planning projects. We also identify, pursue, and obtain grant funding for municipal projects through our in-house grants department. Primary Function: The Municipal Engineer is a professional with 7+ years of experience. This individual will design, manage and/or represent a variety of infrastructure projects (owned by municipalities and local school districts). Primary Duties: • Responsible for acting as the client manager to one or more municipalities or other public agencies. The client manager will act as the single point of contact between the firm and the client. He/she will supervise and coordinate all projects performed in the firm on behalf of the client, to the client’s satisfaction., • Develop or implement engineering solutions to assist clients with improving and maintaining their infrastructure., • Design transportation, utility, facility, or hydraulic systems or structures (as appropriate) using computer assisted design or drawing tools., • Compute load and grade requirements, water flow rates, or material stress factors to determine design specifications., • Estimate quantities and cost of materials, equipment, or labor to determine project feasibility., • Analyze survey reports, maps, drawings, blueprints, aerial photography, or other topographical or geologic data., • Conduct studies of traffic patterns or environmental conditions to identify engineering problems and assess potential project impact., • Perform all design activities ensuring compliance with environmental, safety, or other governmental regulations., • Identify environmental risks and develop risk management strategies for projects., • Attending regularly scheduled public meetings (conducted by Municipal clients) in the capacity of Municipal Engineer, or Land Use Board Engineer. Prepare and present public reports on topics such as bid proposals, project status reports and developmental review projects., • Provide technical advice to clients regarding design, construction, or capital program modifications., • Support of the field activities of our construction inspection staff, including providing timely data, shop drawing review, and client coordination. Education and Experience Requirements: • Municipal Engineering experience preferred but not required., • Strong oral and written communication skills, • Ability to make public presentations., • Ability to define problems, collect data, establish facts and draw conclusions to present to co-workers and clients., • Strong organizational skills and attention to detail, • Knowledge of computer aided design software., • Ability to work in groups as well as individually., • Bachelor of Science Degree in Civil Engineering from an accredited four-year college or university, • PE License Required Salary Range: $92,000 - $151,800 Annually Benefits: Medical, dental, vision, 401(k), Paid Time Off Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-BC1

Job DescriptionJob Title: Diesel Mechanic Job Description This role is responsible for performing repair, maintenance, and inspection work on a fleet of approximately 35 trucks, primarily Kenworth and Peterbilt models. You will work on a variety of vehicles including tractors and trailers, box trucks, and dual trucks, focusing on preventative and corrective maintenance, minor engine work, and troubleshooting of mechanical, electrical, and hydraulic systems. Responsibilities • Perform routine and preventative maintenance on a fleet of approximately 35 trucks, including tractors and trailers, box trucks, and dual trucks., • Complete oil changes and standard service procedures in a timely and accurate manner., • Carry out minor motor and engine work, excluding major engine repairs, which are handled at a separate shop., • Inspect, diagnose, and repair air brake systems to ensure safe and reliable operation., • Inspect, diagnose, and repair hydraulic brake systems., • Perform suspension inspections, adjustments, and repairs as needed., • Troubleshoot and repair electrical wiring and related electrical components on diesel trucks., • Conduct pre-trip and post-trip inspections on trucks that are driven on the road, documenting findings clearly., • Use diagnostic and mechanical troubleshooting skills to identify and resolve issues with diesel engines, transmissions, brakes, hydraulics, pneumatics, and other truck systems., • Perform tire changes and related wheel service when needed, if qualified and experienced., • Respond to and perform service calls on fleet vehicles that have broken down or have been taken out of service., • Operate both manual and automatic transmission trucks safely and proficiently for testing, inspection, or repositioning., • Use basic computer skills to document work performed, maintain maintenance records, and access technical information., • Communicate effectively in verbal and written form with co-workers and customers, maintaining a professional business relationship., • Lift and handle parts, tools, and equipment weighing up to 50 pounds in the course of daily work., • Follow all safety procedures and maintain a clean, organized, and safe work area., • Utilize personal tools and equipment to perform daily maintenance and repair tasks.Essential Skills, • Hands-on experience with diesel repair and diesel maintenance on commercial trucks., • Ability to perform oil changes and routine preventative maintenance on a variety of diesel trucks., • Working knowledge of air brake systems, including inspection, diagnosis, and repair., • Working knowledge of hydraulic brake systems, including inspection, diagnosis, and repair., • Ability to perform minor motor and engine work on diesel engines, excluding major engine overhauls., • Experience with suspension inspection, troubleshooting, and repair., • Electrical wiring knowledge and experience troubleshooting and repairing electrical systems on trucks., • Experience with troubleshooting and repairing diesel engines, transmissions, brakes, hydraulics, pneumatics, and related components., • Strong troubleshooting skills for mechanical, electrical, and hydraulic issues., • Ability to perform accurate pre-trip and post-trip inspections on trucks., • Ability to lift up to 50 pounds safely and repeatedly as required by the job., • Ability to communicate effectively, both verbally and in writing, with co-workers and customers., • Willingness to perform service calls on fleet vehicles that have broken down or have been taken out of service., • Ownership of a set of personal tools suitable for diesel truck maintenance and repair., • Ability to work primarily on a 2nd shift schedule.Additional Skills & Qualifications, • Welding experience for basic repair and fabrication tasks., • Experience using a torch for cutting and related work., • Fabrication skills for brackets, mounts, or minor structural components., • Tire changing capability and experience with truck tires and wheels., • Class B CDL license, enabling operation of commercial vehicles as needed., • Computer skills for documenting work orders, maintenance records, and accessing technical information., • Proficiency in driving both manual and automatic transmission trucks for testing and positioning., • Experience working with fleets and understanding fleet maintenance practices., • Familiarity with preventive and corrective maintenance programs for diesel engines and trucks.Why Work Here? You will join a hands-on, service-oriented operation where your mechanical expertise directly supports safe and reliable fleet performance. The environment values practical skills, professional communication, and teamwork, offering the opportunity to work on a wide variety of vehicles and systems that keep every day different and engaging. You will have the chance to broaden your experience across diesel, electrical, hydraulic, and pneumatic systems while contributing to a reliable maintenance program that keeps the fleet on the road. Work Environment The role is primarily based indoors in a shop environment, with some work performed outdoors as needed for inspections, testing, or service calls. You will work mainly on a 2nd shift schedule, supporting ongoing fleet operations. The setting involves regular use of mechanical tools, personal tools you bring to the job, and basic computer systems for documentation. Work may require standing, bending, and lifting up to 50 pounds, as well as occasional outdoor exposure when handling breakdowns or vehicles taken out of service. The environment is focused on safety, organization, and efficient repair and maintenance of a diverse fleet of diesel trucks. Job Type & Location This is a Contract to Hire position based out of Elizabeth, NJ. Pay and Benefits The pay range for this position is $30.00 - $34.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Elizabeth,NJ. Application Deadline This position is anticipated to close on Jul 2, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionPOSITION SUMMARY: The Water/ Wastewater Project Engineer/ Manager is a professional with a minimum of 8 years of experience. This individual will plan, design and perform analysis on water/wastewater engineering projects such as pipelines; pumping stations; and treatment facilities. Engineer shall be self-motivated, capable of acting as firm’s representative to clients, and providing support to branch offices in NJ/PA/DE/MD area. PRIMARY DUTIES: • Hydraulic calculations and layout of structures., • Producing correspondence/reports/biddable documents for arsenic, radium and iron removal water plants; wells; water storage tanks; pumping stations; piping systems; and wastewater treatment plant improvements., • Engineering support to our inspection department., • Act as firm’s representative to Townships; utility authorities; and private utility companies., • Draft concise proposals for new work., • Capable of addressing multiple simultaneous assignments, on-time and within budgets., • "Proactive"' identification of problems/issues coupled with detailed analysis and effective resolution., • Producing all deliverables associated with this position., • Capable of addressing multiple simultaneous assignments, on-time and within budgets., • Regulatory permitting., • Assist with energy audits. KNOWLEDGE, SKILLS and ABILITIES: • Knowledge of water/wastewater equipment and their purpose., • Ability to read and comprehend complicated construction, drawings, schematics, specifications, codes, and handbooks., • Ability to clarify and concisely express thoughts verbally and in written correspondence/reports/specifications., • Provides effort and takes pride in all work assignments produced., • Not afraid to ask for guidance/assistance in order to expedite the date of assignment deliverables., • Ability to simultaneously work on group and individual assignments., • Capable of providing directions and mentoring less experienced staff., • Capable of managing project meeting attended by either staff, clients or contractor’s personnel., • Familiarity with NJDEP regulations and compliance requirements., • Must have effective communication, management and writing skills., • Must be skilled in the use of Word/Excel products., • AutoCAD capability a plus. EDUCATION/EXPERIENCE: • Bachelors of Science Degree in Civil, Mechanical, Structural, or Chemical Engineering curriculum from an accredited four-year college or university. CERTIFICATIONS/LICENSES REQUIRED • NJPE License Required or Ability to Acquire NJPE Reciprocity Essential, • Professional Licensure Required PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. Occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Job Description Job Summary The Maintenance Manager oversees the maintenance, repair, and safety of the company’s school bus fleet and related equipment. This role ensures all buses meet federal, state, and local safety regulations while maintaining reliable vehicle performance. The Maintenance Manager supervises technicians, manages maintenance schedules, controls inventory, and works closely with operations staff to keep buses road-ready for daily routes. Key Responsibilities Oversee daily maintenance and repair operations for the company’s school bus fleet. Develop and implement preventive maintenance programs to ensure vehicle safety and reliability. Ensure all vehicles comply with DOT, state inspection, and school transportation safety regulations. Supervise, train, and schedule maintenance technicians and shop staff. Diagnose complex mechanical, electrical, and hydraulic issues when needed. Maintain accurate maintenance records, inspection reports, and service documentation. Manage parts inventory and order necessary supplies and equipment. Coordinate vehicle inspections, licensing, and regulatory compliance. Monitor maintenance costs and develop strategies to control expenses. Work with dispatch and operations teams to minimize downtime and ensure route coverage. Enforce workplace safety procedures and maintain a safe shop environment. Qualifications High school diploma or GED required; technical or vocational training in diesel mechanics preferred. 5+ years of fleet maintenance experience, preferably with buses, trucks, or heavy vehicles. 2+ years of supervisory or management experience. Strong knowledge of diesel engines, braking systems, electrical systems, and preventative maintenance. Familiarity with DOT regulations and school transportation safety standards. Valid driver’s license Skills & Competencies Strong leadership and team management skills. Excellent troubleshooting and diagnostic abilities. Organizational and record-keeping skills. Ability to manage budgets and inventory. Strong communication skills with drivers, mechanics, and management. Ability to work in a fast-paced transportation environment. Work Environment Primarily works in a maintenance shop and bus yard environment. May require occasional early mornings, evenings, or weekend work to support fleet operations. Exposure to vehicle exhaust, mechanical equipment, and shop tools. Benefits Competitive salary Health insurance Paid time off and holidays Retirement plan (401k) Training and certification opportunities

Job DescriptionHeavy Equipment Technician / Mechanic Our technicians are the hub of our business – everything turns because of them. Their skill, dedication, and drive keep us moving forward and growing. They’re valued right down to the core of the business and what we do. Compensation & Rewards: • Hourly Pay: $30.00-$38.00 per hour, • $1,500 Signing Bonus for 2+ years experience, • Quarterly Profit-Sharing Bonuses – up to $1,500 quarterly, • Training Bonuses – up to $3,000 for Manufacturer & Technician Training, • Annual Performance Reviews – with Annual Wage Increase Opportunities, • Premium Health & Welfare Insurance Benefits, • 401(k) Employer Matching Program What you'll do: • Gain hands-on experience with advanced diagnostic tools and technologies, building expertise in troubleshooting and problem-solving across a wide range of equipment, • Perform safety inspections, preventative maintenance and mechanical repairs on a wide range of heavy-duty and niche municipal equipment, • Work on vac trucks, hydro vacs, street sweepers, refuse/recycling trucks, and more, • Collaborate with the Service Writer and Parts team to ensure efficient service, • Conduct preventative maintenance and maintain a clean, safe workspace What you bring: • 3+ years’ experience working in a mechanic / technician role, • Ambition to expand your skills and experience, • Experienced with hydraulic and/or electrical work, • Must be able to pass a pre-employment background check, • Mus have valid driver’s license with clean driving record Additional Benefits: • Tool Allowance, • Safety Eyewear & Boot Allowance, • Ongoing safety training and a certified Employment Equity workplace "At my 12 years working in this company I have never stopped learning something new. With so many different products and ever-changing technology. The training and support keep you moving and motivated" – Truck Technician About Joe Johnson Equipment: With 18 full-service dealerships, including parts and service departments across Canada and the US, we’re the leading distributor of public works equipment, proudly serving municipalities and contractor. As a subsidiary of Federal Signal Corporation, we offer unmatched stability, innovation, and growth opportunities. Previous experience or transferable skills may include: mechanic, diesel mechanic, automotive, diesel, automotive technician, heavy equipment mechanic, trailways, heavy equipment technician, small engine mechanic, trailer technician Ready to Apply? Join a team where your skills are valued and rewarded. Apply today and take the next step in your technician career! ------------------------------------------- If you are looking for a new opportunity, then we at Joe Johnson Equipment welcome your application. We encourage applications from all qualified persons, however only those who are being considered for the position will be contacted. If you are contacted for an interview and require any accommodation, please notify HR in advance and we will provide applicable accommodation.

Job Description Company Overview Special Testing & Consulting, LLC specializes in comprehensive inspection and testing services across various construction materials. Since 2006, we have expanded our expertise and service reach within our region, supported by a fully certified team of inspectors and engineers. We are a well respected Engineering and Materials Testing firm with several high profile projects throughout the NY Metro Area. Description We are seeking a motivated, experiened ICC Special Inspector in all areas, particularly in Soils, Masonry, Rebar, or Steel Reinforcement. You will be performing inspection for Soils, Masonry, Rebar, Steel Reinforcement on new construction renovation, alteration and enlargement projects throughout the NYC Metro Area. Your work will directly contribute to the integrity and durability of major construction developments. Additional openings for Mechanical Engineers and Special Inspectors with ICC Certifications in all disciplines, including Welding, CWI, NDT UT MT. Join our highly regarded Engineering and Materials Testing Company! Responsibilities • Perform thorough inspections of masonry work, rebar placement, soils or steel reinforcement in accordance with ICC (International Code Council) standards and project specifications., • Observe work conformance with plans and specifications of drawings, design documents and building codes., • Document inspection findings accurately through detailed reports and communicate non-compliance issues promptly to project teams., • Provide quality-assurance support to the assigned projects to ensure product meets clients quality requirements Certifications Needed: Must have ONE or more current certification listed: • ICC Masonry, • ICC Steel Reinforcement – Rebar, • CWI Welding Inspector or ICC Welding Inspector, • Mechanical Engineer, • ICC Special Inspector (Soils, Steel & Bolting, Reinforced Concrete, Masonry, Fireproofing, Rebar), ACI Level II or Concrete Construction, • A PLUS if you are Master Special Inspector, Civil Engineer or have multiple certs Skills • 2-5 years construction, inspection experience, • Not required, but a plus for bachelor’s Civil Engineering or related education, • Ability to read, interpret engineering drawings and specifications, • Experience in accurately performing and reporting field inspections in timely manner, • Excellent written and verbal communication, • Self-disciplined and highly motivated, • Good decision-making skills, detail oriented, accurate, • Able to travel throughout 5 boroughs of NYC Benefits • Salary based on knowledge, experience and education, • 401k Retirement with Company Match, • Paid vacation/sick, • Paid Holidays, • Medical Benefits with several plans to choose from, • Additional options available for dental, vision, life & more Apply Today! Submit salary requirements and resume We are an equal opportunity/affirmative action employer, and invite all resumes Company DescriptionIf you are looking to join of a highly regarded Engineering firm with long term career goals - then we are the right company for you! For 20 years Special Testing has been providing employees an inclusive, amicable and busy environment. We offer competitive salaries are based on each person's experience and knowledge. Our full benefits package includes, 401k retirement with company match; paid time off for vacation, sick, personal; paid company observed holidays; medical with several options to choose from as well as options for dental, vision, life insurance, disability, hospital and more! Special Testing & Consulting, LLC was founded by Sam Sette, P.E and Bobby Bora who have earned a highly regarded reputation in the New York City construction industry for professionalism, technical knowledge and responsiveness to clients’ needs. Visioning the future of the industry with technological advances in communication and the need for speed in responsiveness, the company was formed to address these changing client needs. Both owners are proud to be actively involved in each project and remain available to their clients as well as their employees. The Company’s mission is not only to provide high standards of quality service to our clients, but just as importantly, to communicate the findings and results to our clients with clear concise reports and speed that our clients depend on Special Testing & Consulting, LLC has a full service in-house testing laboratory that is licensed by the New York City Building Department and successfully assessed by the Cement and Concrete Reference Laboratory (CCRL). It is operated under the supervision of a New York State Licensed Professional Engineer and all testing is performed by American Concrete Institute (ACI) and/or International Code Council (ICC) certified inspectors. Our laboratory includes a state of the art moisture controlled curing room and work stations for concrete testing and for soil testing; all with new equipment furnished in each station. As our company name suggests, we are fully equipped to provide Specialty Testing Services. The Company owns equipment including concrete coring equipment, rebar finders (pachometer), windsor probe and pin equipment, hydraulic jacks and steel test fixtures for pull testing, etc. so that we can service any special needs of a project. To learn more about our company, visit our website: www.Special-Testing.com. We are an equal opportunity employer and invite all resumes. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.If you are looking to join of a highly regarded Engineering firm with long term career goals - then we are the right company for you! For 20 years Special Testing has been providing employees an inclusive, amicable and busy environment. We offer competitive salaries are based on each person's experience and knowledge. Our full benefits package includes, 401k retirement with company match; paid time off for vacation, sick, personal; paid company observed holidays; medical with several options to choose from as well as options for dental, vision, life insurance, disability, hospital and more! \r\n\r\nSpecial Testing & Consulting, LLC was founded by Sam Sette, P.E and Bobby Bora who have earned a highly regarded reputation in the New York City construction industry for professionalism, technical knowledge and responsiveness to clients’ needs. Visioning the future of the industry with technological advances in communication and the need for speed in responsiveness, the company was formed to address these changing client needs. Both owners are proud to be actively involved in each project and remain available to their clients as well as their employees.\r\n\r\nThe Company’s mission is not only to provide high standards of quality service to our clients, but just as importantly, to communicate the findings and results to our clients with clear concise reports and speed that our clients depend on\r\n\r\nSpecial Testing & Consulting, LLC has a full service in-house testing laboratory that is licensed by the New York City Building Department and successfully assessed by the Cement and Concrete Reference Laboratory (CCRL). It is operated under the supervision of a New York State Licensed Professional Engineer and all testing is performed by American Concrete Institute (ACI) and/or International Code Council (ICC) certified inspectors. Our laboratory includes a state of the art moisture controlled curing room and work stations for concrete testing and for soil testing; all with new equipment furnished in each station. \r\n\r\nAs our company name suggests, we are fully equipped to provide Specialty Testing Services. The Company owns equipment including concrete coring equipment, rebar finders (pachometer), windsor probe and pin equipment, hydraulic jacks and steel test fixtures for pull testing, etc. so that we can service any special needs of a project.\r\n\r\nTo learn more about our company, visit our website: www.Special-Testing.com. \r\n\r\nWe are an equal opportunity employer and invite all resumes. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job Description Watch your work come to life in landmark projects around the world when you partner with Syska Hennessy Group! As a global leader in consulting, engineering, and commissioning service, we specialize in MEP, information and communication technology, architectural lighting, vertical transportation, and commissioning. We are seeking an experienced Senior Plumbing Engineer to join our team in New York, NY office. Our dynamic work environment provides the optimal setting to take your engineering career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedule Monday to Thursday in the office for 9 hours and Friday for 4 hours remotely at home and fun social events, it is everything you will need for an exciting, challenging, and rewarding career. Job Responsibilities: As a Senior Plumbing Engineer, you will perform design engineering and provide system design support by working closely with all MEP disciplines to assure well-coordinated designs. This dynamic role will also involve consulting and interfacing with clients, architects, vendors, contractors, and authorities having jurisdiction. Additional responsibilities: • Conduct field surveys, system assessments, and system commissioning, • Attend coordination meetings and job sites, • Perform calculations under Senior Engineer/Designer, • Produce clear and concise drawings consistent with client requirements and firm organization format and drawing standards, • Apply Codes and Standards to all designs (including working drawings and specifications), • Conducting peer reviews and provide QA/QC oversight, • Perform code interpretation, • Assist in business development by expanding on current client relationships, cross selling Syska services and by attending industry and clients events This is a great opportunity for a Senior Plumbing Engineer with a large variety of facility types including Commercial, Industrial, Institutional, and Governmental buildings experience, as well as experience in critical facilities, storage facilities design. In addition to your engineering experience, to succeed in this role, you will need a solid knowledge of fire protection systems design for various projects with the ability to communicate design concepts via drawings and specifications. Engineer requirements: • Bachelor's degree in mechanical engineering; exceptional candidates may substitute with significant years of experience, • Minimum of seven (7) to ten (10) years of relevant experience in the Plumbing Design field, • Experience with the latest version of REVIT is a must, • A working knowledge of the various applications of fire suppression systems gained through both formal training (NFPA 99) and project experience, • Solid knowledge of Mechanical / Plumbing trades, building codes, and drawings/documents, • Detailed knowledge of equipment from various manufacturers and the ability to make proper selections independently., • Ability to independently perform fire suppression hydraulic calculations to support design and estimate construction costs and evaluate the feasibility of construction, • Certified Plumbing Designer (CPD) Certification, highly preferred Benefits: As a Senior Plumbing/Fire Protection with Syska Hennessy Group, you will be part of a global firm with an amazing history! We are committed to being the best, to advancing engineering design practice, and to supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and the total job satisfaction of the great people who work here. As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy Group includes: • Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans, • 401(k) plan with a generous employer matching program, • Training and professional development courses, • Professional development incentive bonuses, • Dynamic Employee Resource Groups, • Competitive Paid Time Off (PTO) policy, • Transit/parking employer stipend, • ½ day work from home Fridays all year long At Syska, we promote an environment that is committed to embedding diversity and equality into the core of our business and culture. We empower our employees so they can take ownership for their work and development and strive to continually improve themselves and our firm. Syska is a place where you can build an exceptional career and have a lasting impact on the world. Syska Hennessy Group | Integrating the best minds and technology to help clients create exceptional environments The salary range listed below is for this particular job posting. Actual pay range for candidates will be commensurate with candidate's experience, skillsets and competencies and may differ based on the cost of labor in their particular location. New York Pay Range$90,851—$120,277 USD

Job DescriptionMatrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at www.MWNE.com and True-Environmental.com to discover the full scope of our capabilities. We are seeking a Senior Civil Engineer (PE) to serve as a technical lead and project manager for civil/site projects including site design, grading, utilities, and stormwater management. This role is responsible for leading design from concept through permitting and construction, managing scope/budget/schedule, and coordinating directly with clients and agencies on a mix of public and private work. The ideal candidate brings strong technical judgment, a collaborative leadership style, and experience navigating complex review environments; NYC/NYS or NJ agency experience is strongly preferred. The salary range for this role is $115-$160k; depending on experience. Key Responsibilities • Technical Leadership (Site/Civil): Lead the civil/site design on multiple projects for grading, drainage, stormwater management, and utility systems (storm, sanitary, domestic water, and related appurtenances), ensuring constructability and code/criteria compliance., • Design Deliverables & QA/QC: Direct and review the development of construction documents (plans, profiles, details, and quantities), engineering calculations, and technical narratives/reports. Provide disciplined QA/QC and seal/sign deliverables as appropriate., • Permitting & Agency Coordination: Manage permitting strategy and submittals (e.g., stormwater/SWPPP, site connection/utility approvals, erosion & sediment control) and lead responses to agency comments. Coordinate with applicable agencies and utility providers; NYC agency coordination is highly valued., • Project Management: Manage scope, schedule, budget, and risk for assigned projects. Prepare and track work plans, staffing, and deliverable milestones; support contract change management and internal reporting., • Client-Facing & Team Leadership: Serve as a day-to-day client contact, lead meetings, and communicate technical recommendations clearly. Mentor and direct junior staff and coordinate with other disciplines to deliver integrated solutions., • Business Development Support: Support proposals and interviews by developing technical approaches, scopes of work, assumptions, and fee estimates; help identify follow-on opportunities and initiate new opportunities through strong client service.Minimum Requirements, • Education: Bachelor’s Degree in Civil Engineering from an ABET-accredited engineering program., • Licensure: Active Professional Engineer (PE) license required. Ability and willingness to obtain additional state licensure as needed., • Experience: Typically 8+ years of progressive civil/site engineering experience with demonstrated responsibility leading design and producing permit and construction documents (site design, grading, utilities, stormwater) for public and/or private projects., • Leadership: Proven ability to lead technical teams, manage multiple projects, and communicate effectively with clients, agencies, and internal stakeholders., • Technical Depth: Experience with green infrastructure/stormwater BMPs, hydrologic/hydraulic analysis, and utility conflict resolution in dense urban environments.Preferred Qualifications, • NYC Agency Experience: Strong familiarity with NYC public work and approval pathways (e.g., NYCDEP site connections/SWPPP, NYCDOT roadway/ADA interfaces, NYC Parks/EDC/NYCHA coordination) and responding to complex review comments., • NJ Agency Experience: Familiarity with NJ agencies and approval processes (e.g., NJDEP, SCDs, local municipalities) and preparing/responding to review comments., • Software Proficiency: Proficiency with AutoCAD Civil 3D; MicroStation and stormwater/hydraulics tools such as HydroCAD, Hydraflow/Storm Sewers, HEC-HMS, and/or HEC-RAS are a plus., • Construction-Phase Support: Experience supporting construction administration (RFIs/submittals, field coordination, inspections) and partnering with contractors on design-build or fast-track delivery., • Licensure: Additional active PE licenses (multi-state) and/or ability to quickly obtain comity licensure. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job DescriptionPRS is hiring immediately for an experienced Diesel Mechanic to join our team with a full-time permanent position in our CSX Bergen, NJ rail terminal in a recession-proof industry. Compensation: • Hourly pay with a yearly income potential of $45,000-$55,000 per year (Which includes overtime), • Pay rate is commensurate with experience. Shift: Day shift, 24/7 call out avail Candidates: • Should have a minimum of 2-year experience in the mechanical field and be preventative maintenance minded., • Must have own tools (Yearly tool allowance provided)., • Must have experience and knowledge working with Air, Electrical, Hydraulic and Diesel systems and components., • Will need a valid driver's license. Primary Responsibilities: • Diagnose and repair forklifts, company vehicles, and hostler fleet., • Maintain Hostler Fleet, • Assist in other areas as needed by managers. Compensation and Benefits: • Our company offers a competitive wage and benefits plan., • Health, Dental, Vision Insurances, life insurance, paid time off, and 401K are available. Requirements: • Must be at least 18 with verifiable mechanical experience, • Candidates must undergo a background check., • IPCS test(physical)., • Drug screening., • Required to join local union.You will be employed directly by Pacific Rail Services and will not be considered an employee of the Railroad.

Job DescriptionPRS is looking for an experienced Diesel Mechanic to join our team in a full-time permanent position working at our Bergen, NJ rail terminal in a recession-proof industry! Compensation: • Hourly pay with yearly income potential of $45,000-$60,000 per year (Which includes overtime), • Pay rate is commensurate with experience. Shift: Day shift, 24/7 call out avail Job Location is: CSX North Bergen Terminal 6201 Tonnelle Ave North Bergen, NJ 07047 Candidates: • Should have a minimum of 2-year experience in the mechanical field and be preventative maintenance minded., • Must have own tools (Yearly tool allowance provided)., • Must have experience and knowledge working with Air, Electrical, Hydraulic and Diesel systems and components., • Will need a valid driver's license. Primary Responsibilities: • Diagnose and repair forklifts, company vehicles, and hostler fleet., • Maintain Hostler Fleet, • Assist in other areas as needed by managers. Benefits: (Medical benefits start after 60 days and the first of the month after that. Other benefits start after your 90-day probationary period). • Affordable Healthcare, Free Dental, cheap Vision Benefits., • Free Life Insurance., • Paid holidays, paid personal days., • Boot reimbursement., • 401K., • Vacation Pay., • Weekly Pay., • Travel Opportunities., • Boot and Tool Allowance Requirements: • Verifiable mechanical experience, • Candidates must undergo a background check., • Must be able to pass a physical strength test., • Drug screening ( as we operate heavy machinery, Marijuana is strictly prohibited), • Required to join local union. You will be an employee of Pacific Rail Services and not an employee of the Railroad.

Job DescriptionPRS is looking for an experienced Diesel Mechanic to join our team in a full-time permanent position in our Bergen, NJ rail terminal in a recession-proof industry! You will be an employee of Pacific Rail Services and not an employee of the Railroad. Compensation: • Hourly pay with yearly income potential of $45,000-$60,000 per year (Which includes overtime), • Pay rate is commensurate with experience. Shift: Day shift, 24/7 call out avail Candidates: • Should have a minimum of 2-year experience in the mechanical field and be preventative maintenance minded., • Must have own tools (Yearly tool allowance provided)., • Must have experience and knowledge working with Air, Electrical, Hydraulic and Diesel systems and components., • Will need a valid driver's license. Primary Responsibilities: • Diagnose and repair forklifts, company vehicles, and hostler fleet., • Maintain Hostler Fleet, • Assist in other areas as needed by managers. Benefits: (Medical benefits start after 60 days and the first of the month after that. Other benefits start after your 90-day probationary period). • Affordable Healthcare, Free Dental, cheap Vision Benefits., • Free Life Insurance., • Paid holidays, paid personal days., • Boot reimbursement., • 401K., • Vacation Pay., • Weekly Pay., • Travel Opportunities., • Boot and Tool Allowance Requirements: • Must be at least 18 with verifiable mechanical experience, • Candidates must undergo a background check., • Must be able to pass a physical strength test., • Drug screening ( as we operate heavy machinery, Marijuana is strictly prohibited), • Required to join local union. Please apply here or apply in person @: CSX North Bergen Terminal 6201 Tonnelle Ave North Bergen, NJ 07047

Job DescriptionThe Mechanic is tasked with the upkeep and repair of trucks, equipment, and machinery utilized in our waste management operations. This position guarantees that all vehicles and equipment function safely and efficiently by conducting diagnostics, repairs, and preventative maintenance as required. The role demands technical proficiency, meticulous attention to detail, and a strong commitment to safety. Key Responsibilities: • Carry out routine maintenance on diesel engines, which includes oil changes, filter replacements, and inspections., • Identify mechanical, electrical, and hydraulic problems using diagnostic tools., • Fix or replace faulty components such as brakes, transmissions, steering systems, and engines., • Perform preventative maintenance to minimize downtime and prolong equipment lifespan., • Examine vehicles and equipment to ensure adherence to safety regulations., • Keep precise service and repair documentation., • Address emergency breakdowns as necessary., • Maintain a tidy work environment and adhere to all safety protocols. RequirementsQualifications: • High school diploma or equivalent (technical certification is preferred)., • Demonstrated experience as a diesel mechanic., • In-depth knowledge of diesel engines, hydraulics, and electrical systems., • Proficiency in using diagnostic software and tools., • Valid driver’s license (CDL preferred, if applicable)., • Excellent problem-solving abilities and attention to detail., • Capability to lift heavy equipment and work under various conditions. BenefitsWhat We Offer: • Competitive hourly wages with full-time hours., • A comprehensive benefits package, including healthcare and retirement plans., • A generous paid time off (PTO) program., • A stable and supportive work environment within a reputable family-owned company., • A commitment to sustainability and environmentally responsible practices. .

Job Description Job Summary Miller’s Tug and Barge is seeking an experienced Port Engineer to oversee the maintenance, repair, and operational readiness of our fleet. This position ensures compliance with regulatory standards, manages preventive maintenance programs, and collaborates with vessel crews, management, and external vendors to maximize fleet efficiency and reliability. The Port Engineer will play a key role in planning and executing maintenance projects, supervising emergency repairs, and optimizing operational costs while upholding the highest safety and environmental standards. Key Responsibilities • Fleet Maintenance & Repairs, • Develop, implement, and oversee preventative maintenance programs for vessels., • Conduct inspections to ensure vessel safety, operational efficiency, and compliance with regulatory requirements., • Plan, manage, and oversee dry-docking and major shipyard repairs, including budgeting, scheduling, and execution., • Troubleshoot and assist with vessel mechanical, electrical, and hydraulic system issues., • Coordinate emergency repairs and casualty response efforts for the fleet., • Work closely with vessel crews to maintain and document daily operational and maintenance records., • Regulatory Compliance & Documentation, • Ensure vessels comply with USCG, ABS, OSHA, and EPA, requirements., • Maintain all necessary documentation for vessel certifications, inspections, and audits., • Assist in regulatory inspections and audits, ensuring corrective actions are completed as required., • Ensure compliance with environmental regulations and company policies., • Budgeting & Cost Management, • Develop and manage maintenance and repair budgets, ensuring cost-effective solutions., • Oversee procurement of spare parts, inventory control, and vendor negotiations., • Analyze maintenance trends and implement cost-saving initiatives., • Crew Training & Support, • Provide technical guidance and training to vessel engineers and crew on maintenance procedures, repairs, and safety protocols., • Assist in hiring, evaluating, and mentoring engineering staff., • Conduct safety training and promote a culture of operational excellence., • Operational Support, • Respond to vessel-related issues 24/7 as needed., • Support fleet operations by ensuring vessels are maintained and available for deployment., • Work closely with operations and marine personnel to optimize fleet performance. Required Qualifications • Bachelor’s degree in Marine Engineering, Mechanical Engineering, or a related field preferred., • Minimum of 5 years’ experience in vessel maintenance and repair, preferably on tugs, OSVs, Crew Boats or barges., • USCG Merchant Mariner Credential (DDE Unlimited or higher preferred)., • Strong knowledge of Subchapters I, L, M, T, dry docking, shipyard operations, and regulatory compliance., • Experience managing budgets, cost analysis, and procurement., • Proficiency in Microsoft Office Suite, maintenance tracking software (e.g., Helm, or AutoCad)., • Valid TWIC card or ability to obtain one., • Strong problem-solving, analytical, and decision-making skills., • Ability to work independently and as part of a team., • Physically capable of boarding vessels, climbing ladders, and working in marine environments. Work Environment & Conditions • Work will be performed in an office, shipyard, and onboard vessels., • Must be able to travel and work flexible hours, including nights, weekends, and emergency call-outs., • Exposure to marine environments, including extreme weather conditions, confined spaces, and mechanical hazards. Why Join Miller’s Tug and Barge? • Competitive salary and benefits package., • Work with an experienced and dedicated marine operations team., • Opportunity to make a significant impact on a growing fleet., • Dynamic and hands-on work environment. If you are an experienced marine engineer with a passion for vessel maintenance and operational excellence, we invite you to apply! Company DescriptionProviding First-Class Marine Service Since 1977. Miller's Launch and its affiliated companies Miller Marine, Miller's Tug and Barge and Miller's Towing and Salvage are marine support companies with local offices on the East Coast and the Gulf Coast. Our Local knowledge helps us provide the best marine support that our customers have come to depend on.Providing First-Class Marine Service Since 1977.\r\n\r\nMiller's Launch and its affiliated companies Miller Marine, Miller's Tug and Barge and Miller's Towing and Salvage are marine support companies with local offices on the East Coast and the Gulf Coast. Our Local knowledge helps us provide the best marine support that our customers have come to depend on.

Job DescriptionSalary: $45-$60/hour Job Title: Civil Engineer Position Summary Pay Rate - $45-$60/hour Adidev is seeking a motivated and detail-oriented Civil Engineer to plan, design, and oversee a wide range of infrastructure and civil works projects including transportation systems, bridges, buildings, site development, utilities, and water/wastewater facilities. This role blends office-based design and analysis with hands-on field oversight, offering the opportunity to see projects through from concept to completion while ensuring quality, safety, sustainability, and regulatory compliance. You will collaborate with multidisciplinary engineering teams, public agencies, and contractors to deliver reliable infrastructure that serves communities and supports long-term growth. About Adidev Adidev Technologies is an engineering and professional services firm supporting infrastructure, construction, public works, and information technology projects across the United States. We hire and support both Civil Engineering and IT professionals, including Mobile Developers and Machine Learning Engineers, and partner with municipalities, transportation authorities, utilities, and leading private-sector organizations to deliver high-quality, practical solutions. Our teams have supported projects and initiatives for public agencies and industry leaders, including state Departments of Transportation (DOTs), municipal public works agencies, and technology-driven organizations such as Delta, Google, Apple, Spotify, US Bank, and FedEx, as well as major engineering and construction firms. Adidev delivers innovative, data-driven solutions that modernize infrastructure, improve efficiency, and strengthen the communities our clients serve. We focus on practical, field-tested solutions and pride ourselves on collaboration, technical excellence, and delivering projects that make a measurable impact. Key Responsibilities -Review survey reports, maps, plans, and technical data to support infrastructure design -Perform engineering calculations (structural, geotechnical, hydraulic, and transportation) -Prepare drawings, plans, and specifications using CAD/BIM and engineering tools -Develop cost estimates, schedules, and project budgets -Obtain permits and ensure compliance with federal, state, and local regulations -Conduct site visits to monitor construction progress and ensure adherence to design specifications -Coordinate with contractors, inspectors, agencies, and stakeholders -Identify risks, resolve field issues, and recommend engineering improvements -Maintain documentation including reports, design changes, and inspections -Support projects from concept development through construction and closeout -Pursue and/or maintain professional licensure (PE preferred) Qualifications / Skills -Bachelors degree in Civil Engineering or related field (Masters preferred for some roles) -Strong foundation in one or more disciplines: structural, transportation, geotechnical, water resources, or environmental engineering -Proficiency with AutoCAD, Civil 3D, BIM, or similar engineering software -Understanding of codes, standards, permitting processes, and regulatory requirements -Strong analytical and problem-solving abilities -Effective written and verbal communication skills -Comfortable working both in office and field environments -Project coordination, budgeting, and scheduling experience -Interest in sustainable, resilient, and community-focused infrastructure design -EIT or PE licensure (preferred or in progress) Working Conditions -Combination of office and field work -Site visits and outdoor work required -Full-time schedule with occasional extended hours based on project needs -Travel or relocation may be required depending on assignments -Perks and Benefits -Competitive salary based on experience and market value -Paid relocation assistance -Flexible and hybrid work options when project schedules allow -Professional development and continuing education support -Licensing and certification reimbursement -Regular performance and salary reviews -Opportunity to work on meaningful infrastructure projects that directly impact communities Ready to Build the Future? If youre passionate about designing and delivering infrastructure that improves everyday life, wed love to hear from you. Submit your resume along with examples of projects youre proud of. Join Adidev and help shape stronger, smarter communities through engineering excellence.

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: We are Looking for a Water Resources Engineer to join our team in New York, NY, supporting wet weather infrastructure projects such as stormwater, drainage, and collection systems. Candidates should hold a bachelor’s degree in civil or environmental engineering and be a licensed Professional Engineer (PE) or able to obtain licensure within six months (if out of state). The ideal candidate will have at least five years of experience, strong hydrologic and hydraulic modeling skills, and experience with CSO/SSO programs. Excellent technical writing, communication, and collaboration skills are required.Typical responsibilities include: • Provide technical planning, design and construction support on various wet weather projects that may include combined sewer overflow, collection system, pump station, stormwater, hydrologic and hydraulic models, and/or other projects, • Prepare engineering calculations and supporting analysis of alternatives, • Prepare and evaluate wet weather control alternatives, • Develop and complete applications, permits, engineering reports and specifications, • Prepare and review engineer estimates, • Prepare design cost estimates, • Conduct research and development for projects, • Monitor task budget and progress, • Prepare project status and other reports, • Communicate project details with other design engineers, • Conduct project cost reviews, • Promote sales, • Prepare and review scope, budget, and schedule for project tasks, • Assist with proposals, marketing, project reports, and technical presentations, • Conduct on-site inspections as needed, • Attend and/or conduct client and project meetings, • Attend various meetings including pre-design, plan review, pre-construction, professional organization, staff, etc., • Attend seminars and/or training classes, • Maintain excellent client relations, • Maintain a safe working environmentEducation:, • Bachelor's degree in Civil or Environmental EngineeringSkills/Experience:, • Strong background in stormwater, drainage, and collection systems design, • Experience with wet weather programs (CSO/SSO, LTCPs, consent decree work), • Proficiency in hydraulic/hydrologic modeling tools (SWMM, InfoWorks, SewerGEMS, etc.), • Understanding of green infrastructure design and climate resiliency, • Familiarity with NYC DEP and DDC standards (preferred)-Licensed Professional Engineer (PE) required (or ability to obtain within 6 months if out-of-state), • Strong technical writing and communication skills, • Ability to manage multiple tasks and coordinate across teams, • Experience mentoring junior engineers Additional Preferred Experience: • Real-time control (RTC) or smart sewer systems, • Construction phase services (RFIs, submittals, site visits)About Wade Trim: Wade Trim is committed to maximizing the value of infrastructure investments. We’ve been solving complex engineering challenges for a century. We customize our work approach to fit each project using a collaborative, friendly style to deliver solutions our clients can stand behind. Our supportive culture recognizes and strives to fulfill collective client, company, and individual needs. Mentoring and building skills of Wade Trim staff is a priority. Frequent interaction among staff is encouraged, company leadership is easily accessible, and opportunities are provided for staff to help shape the firm’s future through strategic planning. Work/life balance is supported through a flexible, hybrid work schedule that brings team members together in the office at least three days a week and connects them virtually when working from home. To solve our clients’ toughest challenges, we’ve devoted ourselves to delivering innovative solutions. Our Office of Applied Technology (OAT) is dedicated to seeking new technologies or ways to apply existing technologies to enhance value to our clients and positively impact communities. All staff are encouraged to share ideas and suggestions for innovative technologies or processes to adopt. This open-minded approach enables us to advance technology, foster innovation, and stay ahead of our clients’ needs. Wade Trim’s success is shared by the employees that make it happen. Since our beginning, our firm has been 100% employee owned. This cultivates an ownership mindset that benefits our work approach, collaborative culture, and ability to deliver client solutions. We believe employee ownership drives the sustainability and growth of our firm and provides all our employees with opportunities for financial success. If you are looking for a challenging and rewarding career in a friendly environment, please submit your resume by visiting the Careers section of our website at http://www.wadetrim.com/careers. Wade Trim does not accept unsolicited resumes, candidate profiles, or CVs from third-party recruiters or employment agencies. Any submission made without a valid, signed agreement and an approved engagement request from Wade Trim’s People Services Team will be considered the property of Wade Trim. Wade Trim reserves the right to pursue and hire any candidate submitted through unsolicited means without any financial obligation to the recruiter or agency. A valid agreement can only be signed by the Director of People Services. Resumes or candidate profiles submitted at the request of a Wade Trim employee who is not authorized by the People Services team do not constitute a valid engagement. Recruiters and agencies must have a current, written agreement authorized by the Director of People Services to be considered an approved vendor. Wade Trim is an Affirmative Action/Equal Opportunity Employer.