Trabajos industrial maintenance mechanic en Houston, TexasCrear alertas

Job Description Job Description Summary This person is a member of a production crew that operates two productionlines. You will work with your shift to safely produce high qualityproduct in a fast pace continuous operation environment. The expectationfor Level 1 operator is to deliver quality packaging and products for ourcustomers. Job Duties And Responsibilities Principal Duties And Responsibilities: Plant and Environmental Safety Lives the Safety Stand and meets all safety requirements. Safety is acondition of employment. Take personal ownership to work safely and hold other team members to the samehigh standards of safety Notify supervisor immediately of any accident, near miss or on- the -job injurywhen it occurs no matter how insignificant it may seem. Participates in the safety, quality, autonomous maintenance, TPM andhousekeeping programs as established within the plant; including but not limitedto Focused Improvement Events, Safety Committee, Training, etc. Performs job tasks to reduce environmental impact and adheres to theenvironmental regulations and recycling procedures for waste disposal. Complies with all plant rules and safety regulations. Performs cleanup duties at workstations and/or equipment/machinery. Communicates safety concerns and/or equipment problems/abnormalities toappropriate personnel, maintaining strong communication with the appropriateline section operators to ensure immediate action is taken for product out ofspec. Inspect vehicles before use and throughout shift, keeping all equipment cleanand operational. TPM Participates in plant TPM initiatives - completing activities associatedwith TPM tasks (adheres to CILT standard, 5S). Continues to use TPM methodology to gain a better understanding of theequipment. Identifies and participates proactively in learning opportunities and developsexpertise in those areas. Utilizes Focus Improvement tools to problem solve. Works to achieve zero injuries, zero defects and zero losses. During PM days, uses time effectively to bring equipment to optimal conditionfor zero losses. Maintain DM and Step Boards. Quality Perform quality checks. Maintain control panel adjust speed, delays, and other timers if needed. Interface with plant employees to provide quality control information. Monitor and report unusual or suspect material issues. Keep layout board updated. Understand and react to upset conditions. Evaluate all finished product for proper weight. Productivity Both Processes: Have a basic understanding of product process. Operate both Palletizers. Operate Shingle wrapper Operate stretch wrappers for all pallets. Operate banding equipment. Follow IVC inventory processes; print and apply labels. Weigh and report pallet weights. Operate powered industrial vehicles (including forklifts, Mule, sweepers, andscrubbers). Load and stack rewraps. Accurately report the amount of scrap and seconds for tracking. Adjust guide plates and speed for different products. Cover all front-end employee outages (to cover vacation, holiday, call-offs,etc.). Relieve crew members from duties for breaks. Visibly verify completion and submission of all level 1 operator paperwork(LPA, FAI, Dimension, Pallet Count Sheet). Insert cores into rolls. Manage seconds, scrap, and trash. Monitor equipment. Listen for alarms and responds appropriately to the various alarm signals. All other tasks or duties assigned by your leader. Assist in all lace-up, product change, and color change procedures. Perform preventive maintenance (PM) on down days. Assist the shift mechanic on machine outages. Other Demonstrate the ability to effectively communicate. Support the training and development of colleagues. Demonstrates flexibility to changing priorities as business needs dictate. Identifies and participates proactively in learning opportunities, and developsexpertise in those areas. Follows standard operating procedures and processes. Can and is willing to make decisions. Knows the chain of command to getsupport. Regular Attendance on site and the ability to rotate varying shifts. All other duties as assigned or needed. Job Requirements Skills And Abilities The employee should hold the following skills and abilities: Demonstrated desire to impact safety Must be able to work independently or in a team atmosphere with minimal directsupervision Demonstrated mechanical aptitude and the ability to troubleshoot High attention to detail Demonstrated ability to multi-task Basic mathematics skills Able to effectively communicate (read, write, speak, understand) English Computer And Software Competencies The employee must be able to: Work with a computer to perform basic data entry Demonstrate basic computer skills such as Microsoft Outlook, IVC and SAP Education And/Or Experience High School Diploma or GED Equivalent required Minimum of 1 year manufacturing or process related experience Essential Physical Requirements/Work Environment Must remain drug free Exposure to dust/dirt/fumes/fiberglass Ability to work in wet environments: including head and feet Industrial manufacturing environment with extreme temperature variation Exposure to sounds or noise levels that maybe uncomfortable (hearing protectionis provided) Ability to wear applicable PPE for up to 12 hours Ability to distinguish colors and shading Ability to become certified to operate a forklift Prolonged sitting, standing, or walking for 8 12 hour shifts Bending and twisting; repetitive movements Able to do repetitive hand, arm, leg movements for up to 12 hours Must be able to squat, bend at the waist and knees freely Be able to climb up to three floors or stairs, use full upper body movement forprocess; stand up to 12 hours with breaks Ability to work from heights Lift, push and pull 40lbs.repetitively Handle, control, feed, or feel objects, tools or product Must be able to work flexible rotating shift schedules mandatory overtime asrequired

Job Details Division: Nucor Warehouse Systems Location: Houston, TX, United States Other Available Locations: N/A Welcome to Nucor, where our unique culture sets us apart. Joining Nucor means becoming part of North America's largest steel and steel products manufacturer, offering unmatched career opportunities and stability. We are known for our innovative sustainability practices and are the continent's largest recycler. Our vibrant culture, built on personal connections and teamwork, empowers every team member with the freedom to innovate and contribute to our collective success. Experience a workplace where safety, efficiency, and meaningful personal connections define every day, enriching both our teammates and the communities we serve. Nucor supports its teammates with top-tier benefits like Medical, Dental, Vision, and Disability Insurance, 401K and Roth accounts, Profit sharing, Pay-for-performance bonuses, Paid parental leave, Tuition reimbursement, Stock program, Scholarships and more. Basic Job Functions: Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. Ensures machinery and mechanical equipment operation by completing preventive maintenance requirements on presses, motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. Locates sources of problems by observing mechanical devices in operation; listening for problems; using precision measuring and testing instruments. Removes defective parts by dismantling devices; using hoists, cranes, and hand and power tools; examining form and texture of parts. Assess the time needed to complete a task. Determine the dimensional changes in the parts requirements by inspecting and using the onsite Machine Shop. Adjusts functional parts of devices and control instruments by using hand tools, levels, plumb bobs, and straightedges. Controls downtime by informing production workers of routine preventive maintenance techniques; monitoring compliance. Fabricates repair parts if needed by using machine shop assistance. Maintains equipment, parts, and supplies inventories by checking stock to determine inventory level; informs Supervisor when removed from inventory. Conserves maintenance resources by using equipment and supplies as needed to accomplish job results. Maintains production and quality by ensuring the operation of machinery and mechanical equipment. Other duties as assigned. Minimum Qualifications: 2 - 3 years of experience as an industrial mechanic in a manufacturing facility. Experience with working on hydraulic, pneumatic and electrical maintenance and repairs Ability to read and interpret schematic diagrams Preferred Qualifications: 2 or more years working experience in an industrial plant 2-year degree in mechanical/electrical or related field VFD knowledge and experience Programmable Logic Controller knowledge and experience Formal electrical safety knowledge and experience Experience in operation of forklift, mobile crane, and/or other mobile equipment Preventative maintenance scheduling experience Nucor is an Equal Opportunity Employer and a drug-free workplace

Job Description Do you have the need for speed? Do you thrive in a fast paced, energetic work environment that focuses on serving our customers? If so, K1 Speed is the place for you. As the nation’s indoor electric karting leader and innovator for over the past decade, K1 Speed does not compromise on the quality and value of the product we offer. Through our industrial go-karts and excellent staff, our passion is to show the world how fun karting can actually be. As a Shift Supervisor,you will train staff on being the best they can be. You love working with a team and being a leader. Is this you? Duties and Responsibilities: • Cash handling duties including preparation of tills, change fund maintenance, and preparation of deposits, • Customer interaction and auditing of customer experience including but not limited to event execution, • Ensuring that cashier personnel adhere to correct cash handling procedures and sell effectively, • Ensuring that track personnel run races safely and efficiently, • Ensuring that mechanic personnel maintain our karts in peak working condition, • Ensuring that all staff are strictly adhering to company policies and providing outstanding customer service, • Ordering and purchasing operation supplies, concessions, and retail merchandise, • Performing operational paperwork duties including safety, payroll, facility, • Contributing to schedules and employee communications, • Corresponding with and providing regular reports to Management, • Maintaining the effective operational feasibility of the center, • Maintaining the highest standard of facility appearance including storage areas and the parking lot, • Coordinate with your Manager and Regional Manager to ensure that all facility maintenance is performed quickly, • Weekends required, • Potential to earn tips/commission Job Requirements: • Must be at least 18 years of age, • Must be able to safely lift/push/pull heavy objects on an ongoing basis., • 2+ years of supervisory experience preferred, in the following fields: Restaurant, Entertainment, Hospitality, Bowling Alleys, Amusement Parks, Miniature Golf, • Great customer service skills-Must be able to work weekends and evenings, • Background Check is required prior to employment, • Provide proof of identity and eligibility to work in the United States Benefits for Full Time Employees Only: • Medical, dental and vision benefits., • Paid vacation and sick time

Job Description (Please note if you are viewing this posting on an external job board, unless specifically stated in the posting, the provided hourly/salary estimates may not be accurate as they are not provided by CKS.) We are seeking a skilled Industrial Maintenance Mechanic to join our team. The ideal candidate will be responsible for troubleshooting, repairing, and maintaining production machinery and facility equipment to ensure safe, efficient, and reliable operation. This role requires strong mechanical aptitude, problem-solving ability, and experience working in a manufacturing environment. COMPETITIVE PAY BASED ON EXERIENCE AND SKILLS Shift Availability: 2nd: 3:00pm-11:00pm, Monday through Friday (most Saturday's) Key Responsibilities: • Perform troubleshooting, repair, and preventive maintenance on production equipment, mechanical systems, and facility utilities, • Diagnose issues with motors, gearboxes, pumps, conveyors, pneumatic and hydraulic systems, • Conduct electrical troubleshooting (basic to intermediate), including sensors, switches, and control wiring, • Read and interpret mechanical drawings, schematics, and manuals, • Perform equipment adjustments, changeovers, and improvements to support production goals, • Maintain accurate maintenance logs and documentation, • Ensure all work is performed safely and in accordance with company policies, • Collaborate with production team to minimize downtime and improve equipment reliability Qualifications: • 3+ years of industrial or manufacturing maintenance experience required, • Strong mechanical troubleshooting skills; knowledge of pneumatics, hydraulics, and mechanical assemblies, • Ability to perform basic electrical troubleshooting, • Welding and fabrication experience a plus, • Ability to work independently and as part of a team Preferred Experience (not required): • Experience in plastics, blow molding, injection molding, or similar manufacturing industries, • Knowledge of PLCs, VFDs, and automation systems

Job Description Job Description: Commercial HVAC Mechanic installs, maintains, and repairs large-scale heating, ventilation, air conditioning, and refrigeration systems for businesses, using electrical/mechanical skills, blueprints, and control knowledge to diagnose issues and ensure efficient, code-compliant operation, often working with chillers, boilers, and complex systems in diverse environments like offices, schools, and factories. Key duties involve preventive maintenance, emergency repairs, refrigerant handling, using specialized tools (lifts, meters), and documenting work while providing great customer service. Responsibilities: ● Diagnose and troubleshoot Commercial HVAC system issues, identifying necessary repairs or replacements. ● Install, repair, and maintain HVAC systems, including RTU, split systems, fans, pumps, air handling units (AHUs), air cooled chillers, and refrigerant systems. ● Perform system startups and commissioning. ● Collect and interpret system data (e.g., static pressure, voltage, amperage, CFM). ● Communicate professionally with customers and internal teams. ● Complete and submit all required documentation daily. ● Work independently, setting and achieving goals with a strong sense of ownership and urgency. ● Travel to customer sites within the greater Houston area. ● Adhere to all safety protocols, including safe driving practices. ● Be available for on-call service as needed, including evenings and weekends. Education and/or Experience Required: ● Minimum of 5 years of Commercial HVAC service experience. ● Proficient in refrigerant system installation, evacuation, and charging. ● Experience with HVAC equipment startup and commissioning. ● Familiarity with HVAC instruments and data collection. ● EPA Universal Certification required. ● Strong knowledge of routine maintenance procedures (e.g., filter changes, belts, compressors, motors). ● Understanding of control systems, including wiring, thermostats, and related devices. ● Proficiency in Microsoft Office Suite. ● Excellent verbal and written communication skills. ● Valid driver’s license with a clean driving record. Physical Requirements: ● Able to communicate with others both written and orally ● Able to travel locally as required ● Mobility within the office and on construction job sites ● Ability to climb ladders ● Ability to lift and carry 50 pounds Entech Sales & Service, is proud to be the one stop shop for all of our customers facility needs in Texas. Our goal is to provide the highest level of service on Commercial and Industrial properties. Entech Sales & Service LLC, is nationally recognized as a leading source for Commercial Building Systems support. With hundreds of clients nationwide, we are one of America's premier Service Providers. We are constantly seeking the finest professionals in the business to join our team at all locations. We are committed to hiring only individuals who pride themselves on setting quality standards for the industry. In addition to steady work, safer working conditions and excellent wages, Entech provides a benefits package that is among the best in the industry. Our comprehensive benefits encourage our employees and their families to build a lifelong relationship with us. • Competitive Salary, • Dental Plan, Vision Plan and Health insurance, • Prescription drug plan, • Life Insurance, • Short-term disability, • 401(k) savings plan, • Employee Stock Ownership Plan (ESOP), • Vacation Pay, • Incentive programs, • Company vehicle Please visit our website at : www.entechsales.com for more information on our company. Entech Sales & Service LLC conducts background investigations as part of its hiring procedures. All offers are contingent upon the satisfactory results of the drug test and applicable background check. Company DescriptionEntech Sales & Service LLC is proud to be the one stop shop for all of our customers facility needs in the State of Texas and beyond. Our goal is to provide the highest level of service on Commercial and Industrial properties. Entech is nationally recognized as a leading source for Commercial Building Systems, CCTV Systems, HVAC, Plumbing, Electrical, Generators and Rental HVAC and Power Equipment. With hundreds of clients nationwide, we are one of America's premier Service Providers.Entech Sales & Service LLC is proud to be the one stop shop for all of our customers facility needs in the State of Texas and beyond. Our goal is to provide the highest level of service on Commercial and Industrial properties. Entech is nationally recognized as a leading source for Commercial Building Systems, CCTV Systems, HVAC, Plumbing, Electrical, Generators and Rental HVAC and Power Equipment. With hundreds of clients nationwide, we are one of America's premier Service Providers.

Job Description Location: Bush Intercontinental Airport (IAH) – Houston, TX Pay Rate: $24.50/hr + Overtime Opportunities Schedule: Full-Time Launch Your Mechanical Career Into Transit Technology Are you a hands-on mechanic or technician looking to grow into a stable, long-term technical career? We are hiring Maintenance Mechanics to support and maintain the automated transit train system at Bush Intercontinental Airport (IAH). This is a unique opportunity to apply your automotive, diesel, fleet, equipment, or mechanical repair experience in a high-tech transportation environment with paid training provided. Whether your experience comes from dealerships, fleet shops, heavy equipment, aviation, military, trade school, or personal mechanical projects, we want candidates with strong mechanical aptitude and troubleshooting skills who are eager to learn advanced transit systems. What You’ll Be Doing As a Maintenance Mechanic, you’ll assist with maintaining and troubleshooting automated train systems that transport millions of airport passengers safely and efficiently each year. Key Responsibilities: • Perform preventive maintenance, inspections, and safety checks on automated transit vehicles and support equipment, • Diagnose and repair mechanical, electrical, electromechanical, pneumatic, and HVAC-related issues, • Work on components such as motors, brakes, gearboxes, couplers, compressors, suspension systems, doors, and control systems, • Use hand tools, power tools, diagnostic equipment, and schematics to troubleshoot equipment failures, • Support corrective and emergency repairs to maintain safe and reliable train operations, • Assist senior technicians with troubleshooting, testing, system adjustments, and repairs, • Complete maintenance logs, inspection reports, and repair documentation accurately, • Follow all company safety procedures and airport security requirements, • Support 24/7 transit operations through rotating shifts and overtime coverage when needed What We’re Looking For Required Qualifications: • Experience in automotive, diesel, fleet, aviation, industrial, or mechanical repair environments, • Hands-on experience with mechanical systems such as brakes, suspension, drivetrains, engines, HVAC, or component replacement, • Ability to safely use common shop tools, diagnostic tools, and repair equipment, • Strong mechanical troubleshooting and problem-solving skills, • High School Diploma or GED equivalent, • Valid Driver’s License, • Ability to work nights, weekends, holidays, and rotating shifts, • Ability to pass a federal background check and obtain airport security clearance Preferred Qualifications: • Trade school, technical training, military mechanical experience, or vocational certifications, • Experience reading basic schematics, service manuals, or wiring diagrams, • Familiarity with electrical troubleshooting, pneumatic systems, HVAC systems, or electromechanical equipment, • Experience working in fast-paced maintenance or operational environments If you’ve worked on cars, trucks, motorcycles, fleet vehicles, heavy equipment, aviation equipment, or other complex mechanical systems, your experience may be a strong fit for this role. Apply today and build a career maintaining the automated transit systems that keep Houston moving. Company DescriptionOne of the leading suppliers of workforce solutions, staffing, outsourcing, and consulting is BE Staffing Solutions. In the practice of employment law, our trained group of seasoned staffing specialists adheres to a rigorous code of conduct. We uphold a culture and organizational framework that promotes efficiency and consideration for both clients and coworkers.One of the leading suppliers of workforce solutions, staffing, outsourcing, and consulting is BE Staffing Solutions. In the practice of employment law, our trained group of seasoned staffing specialists adheres to a rigorous code of conduct. We uphold a culture and organizational framework that promotes efficiency and consideration for both clients and coworkers.

Job Description SUMMARY: The Maintenance Technician is responsible for preserving the condition and functionality of our business equipment and premises. Duties will include conducting quality assessments, scheduling repairs, maintaining inventory, and developing preventative maintenance procedures. A Jack-of-all-trades, with in-depth knowledge of maintenance procedures, hydraulic systems, and basic tools and appliances. JOB DUTIES/RESPONSIBILITIES: • Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines, • Develop and perform Preventative Maintenance, adhere to manufacturers' schedules, • Record maintenance activities and repairs so as to record/audit performance results, • Responsible for providing technical assistance on all things related to facility maintenance including electric, landscaping, painting, carpentry, building construction, plumbing, etc., • Maintain inventory controls for cost effective operations, • HVAC / Electrical / General repairs, • Recommend course of action to management based on costs, • Establish timeline and execute projects along timeframe, • Maintain a clean and safe work environment, • Adhere to all Metal Coatings and OSHA rules and regulations at all times and wear proper safety equipment while on plant grounds, • Comply with all policies for the safe storage, usage and disposal of hazardous materials, • Meet or exceed company safety standards, • Perform other job responsibilities as assigned by management QUALIFICATIONS Skills • Plumbing, grounds keeping, electrical, hydraulic and carpentry knowledge, • Skill in the use of tools, machines and testing instruments used in the repair and overhaul of plant equipment and building services, • Knowledge of the basic operating principles of the electrical and mechanical systems and components found in most plant equipment, • Ability to carry out not only simple, but complex oral and written instructions and deal with problems from standardized situations and work experience, • Ability to apply knowledge of equipment operating principles to diagnose and correct malfunctions in plant equipment, • Good mathematical skills, including basic math, fractions and conversions of four-five digit numbers and common units of measurement in both metric and decimal system, • Ability to communicate well with supervisors, welders, leadmen, other Mechanics, maintenance personnel, co-workers and outside contractors, • High level of attentiveness and physical coordination to perform the work activities safely and productively Education • High School Diploma or equivalent, • Certificate in HVAC is preferred, • Certificate and two (2) years of journeyman level experience in the maintenance and repair of industrial equipment or an equivalent combination of education, training or experience Work Experience • A minimum of 2 years’ experience in a similar role, • In-depth knowledge of electrical, hydraulic and other systems Physical Requirements: • Continuous exposure to extreme heat, extreme cold, extreme noise, and working outdoors, • Must wear protective equipment while at the location, • Requires walking, sitting, lifting, pushing, pulling, and climbing to a significant degree, • Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects, • While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees/visitors as well as function safely around heavy rolling equipment, • Must be able to perform all job functions which include, but may not be limited to, pushing, turning, and/or pulling of controlsCompany DescriptionMetal Coatings Corp is an industrial coatings applicator in Houston, Texas. We offer an array of solutions and products designed to safeguard components and fasteners from corrosion, abrasion, and chemical damage.Metal Coatings Corp is an industrial coatings applicator in Houston, Texas. We offer an array of solutions and products designed to safeguard components and fasteners from corrosion, abrasion, and chemical damage.

Job DescriptionMaintenance MechanicAutomation Personnel Services is seeking a Maintenance Mechanic to ensure shop equipment, machinery, and building systems operate safely and efficiently in support of a large heat exchanger manufacturing parts and service company. Pay Rate:$27.00 - $32.00 Depending on Experience Schedule and HoursMonday – Friday 8:00am – 5:00pm Maintenance Mechanic Duties and Responsibilities· Perform general maintenance and repairs on shop equipment and building systems safely and in accordance with company standards· Troubleshoot, repair, and maintain production machinery; read and follow prints and schematics as required· Conduct operator inspections, maintain clean and safe work areas, and ensure equipment is operating properly· Communicate with supervision regarding equipment downtime, needed repairs, and ordering of parts, supplies, and safety materials· Support production as needed by working in other areas and completing assigned projects efficiently and safely· Follow all company rules, procedures, and standard work while actively participating in safety, 5S, quality systems, and continuous improvement initiatives Maintenance Mechanic Qualifications and Requirements· 1–3 years of experience in ASME Code fabrication or equivalent manufacturing/maintenance experience preferred· Basic understanding of heat exchanger terminology and manufacturing processes· Strong knowledge of safety practices and ability to work safely in an industrial environment· Ability to apply basic mathematical concepts and problem-solving skills· Highly motivated, detail-oriented, and able to manage multiple tasks or projects· Must be able to pass a Drug Screen and Background check. Job Type Full-time, temporary to hire Benefits • Weekly Pay, • Medical, dental, vision, short-term disability, and life insurance, • 40 Hours Service Bonus after 1 year of continuous service and 1500 hours, • 6 paid Holidays after 1 year of continuous service and 1500 hours401(k) Retirement Plan Automation Personnel Services is the only staffing agency specializing in manufacturing and industrial roles that offers 401K matching to all eligible contingent and temporary associates. Interested in this job?Click Apply Now, email your resume to apsHouston@apstemps.com, or call us at 713.637.8600 to learn more. You can also apply in person at our office located at Automation Personnel Services Houston East Branch14705 Woodforest Blvd. Suite 106 Houston, TX 77015Bonus Opportunity! We are also offering a $50.00 referral bonus. Both employee and referral must stay on assignment for 30 days to receive the payout.About Automation Personnel ServicesAutomation Personnel Services is an award-winning staffing agency with more than 30 years of experience in manufacturing and light-industrial staffing. Automation Personnel Services is the winner of the ClearlyRated® Best of Staffing Talent Award from 2019-2024, and the ClearlyRated® Best of Staffing Client Award from 2016-2024. Automation Personnel Services is also the recipient of the Safety Standard of Excellence Award by the American Staffing Association and was named one of the Best Staffing Companies to Work For 2022 by CIO Views Magazine. Our goal is finding you the right job! Equal Opportunity Employer APSHouston

Job Description We’re hiring a Mechanic for our Southeast Houston client! We are looking for experienced, reliable, hard-working employees who can interview immediately! DESCRIPTION OF YOUR DREAM JOB: Job Title: Maintenance Mechanic Location: Southeast Houston Pay: $25-$30/hour Hours: M-F 7am-4pm with flexibility to work nights as needed Duration: Temp-to-hire Description of Duties: Repairing equipment in the manufacturing plant. Diagnose and maintain small diesel engines, generators, electrical and hydraulic systems. Requirements: 3+ years of experience in industrial maintenance. Diagnostic and Troubleshooting skills. Experience with fabrication equipment, and ability to perform basic welding a plus. WHO WE ARE: Carlton Staffing is a local staffing firm in Texas with over 44 years of experience! We have connections with numerous hiring managers throughout the greater Houston area. An application with us is an open application with our rock-star clients. Don't wait another minute! Let our knowledgeable staff assist you today, visit www.carltonstaffing.com. Company DescriptionCarlton Staffing is a local staffing firm in Texas with over 44 years of experience! We have connections with numerous hiring managers throughout the greater Houston area. An application with us is an open application with our rock-star clients. Don't wait another minute! Let our knowledgeable staff assist you today, visit www.carltonstaffing.com.Carlton Staffing is a local staffing firm in Texas with over 44 years of experience! We have connections with numerous hiring managers throughout the greater Houston area. An application with us is an open application with our rock-star clients. Don't wait another minute! Let our knowledgeable staff assist you today, visit www.carltonstaffing.com.

Job Description We Create Products and Brands That People Trust to Clean, Sanitize, and Protect Their Homes and Pools When you join KIK Consumer Products, you’re joining a team that cares about the work we do and also about each other. We bring exceptional brands and products to consumers that help them protect the health and wellness of their families and the cleanliness of their homes and pools. We are committed to building a culture of performance driven by accountability, collaboration, and agility that enables timely fact-based decision-making and exceptional execution with unwavering ethics. As one of North America’s largest independent manufacturers of consumer products, KIK helps a large portfolio of brands and retailers bring their products to life. Your Role at KIK As a Maintenance Mechanic 3 (Industrial PLC Electrician) at KIK, you will troubleshoot, maintain, and repair 480V industrial electrical systems and PLC controls that power our high-speed manufacturing operations. You will serve as the electrical expert on shift, ensuring equipment reliability, minimizing downtime, and upholding strict Lockout/Tagout and safety standards. Your work directly supports production uptime and the overall performance of our plant. The schedule for this role is Monday-Friday 1:00pm-9:30pm (CST), with overtime regularly scheduled on weekends as needed. The pay rate for this role is $41.20 per hour. What You’ll Do • Installation, troubleshooting & repair of low & high voltage (single/three phase) industrial electrical & control systems for packaging lines, facilities & plant support equipment such as air compressors, boilers, pumps, water purification system, production plant & warehouse lighting, • Performs all work in compliance with company policies, procedures, and federal, state & local laws, • Responsible for all electrical emergency & scheduled maintenance tasks across the plant., • Identifies, reviews, and plans electrical projects with/without guidance from controls engineer or department manager, • Sizes circuits & installs conduit according to national and local electrical code & standards, • Upgrade outdated or unsafe electrical installations across the plant, • Be a subject matter expert for all electrical needs across the plant, • Standardize all electrical controls & power components to Allen Bradley parts as much as possible, • Key member of plant emergency response team What You’ll Bring • High school diploma / GED, or trade school, • 3 or more years of experience in the installation, troubleshooting, and maintenance of industrial electrical equipment with related training, • Be able to interpret & modify electrical prints, schematics & document all changes, • Be able to use diagnostic equipment such as multi meters, oscilloscopes, etc, • Understanding of Electrical Hazard Class 1, Div. 1, Group C&D, • Knowledge of industry standard motion sensing & control devices, • Knowledge of DC and AC motors & drives (AB preferred), • Knowledge of Allen-Bradley Mircologix, Compactlogix & Controllogix processors, • Hands-on knowledge in PLC programming & HMI interface configuration, • Hands-on knowledge of converting relay logic-based systems to PLC based systems, • Knowledge of cGMP and other regulatory requirements applicable to electrical installations preferred, • Knowledge of applicable NEC and OSHA standards, • Functional knowledge of personal computers and common productivity software, • Familiarity with emergency response procedures (conducted by KIK) Physical Demands / Work Environment • This position is for shift work & the primary shift assignment will be 2nd shift. Depending upon any urgent need, the person may be expected to work 1st, 2nd, or 3rd shift, • Person should be able to climb on extension ladders, work from elevated platforms, from top of elevated structures and from the articulating boom lifts as needed, • Person should be able to reach tight & difficult to access areas, • This position requires up to 8 or more hours of standing on the feet & walking from job site to job site within the manufacturing plant as needed, • This is not an office position, • This person should be able to lift 10-40 lb. weight as needed What You Will Get KIK offers a competitive salary and comprehensive benefits including health, wellness, dental, vision, life, and disability insurance. You can plan for your future with KIK's retirement savings options including employer match. KIK also recognizes the importance of continuing education and offers Education Assistance to our employees to encourage continued personal development and growth. We understand compensation is an important factor as you consider the next step in your career. This position has a base hourly rate of $35.87. The actual salary may vary based upon several factors including your relevant skills and experience. About KIK We create the products and brands that people trust to clean, sanitize, and protect their homes, pools, and cars. We are one of North America’s largest independent consumer product manufacturers with 16 North American manufacturing facilities. We also operate globally in Canada, Europe, South Africa, and Australia. We are known for our portfolio of notable brands including Spic and Span® and Comet® cleaning products, Clorox® Pool&Spa™ (under license), BioGuard®, and Natural Chemistry® pool chemicals. We are also the #1 producer in North America of store-brand bleach and a leading private-label provider of laundry detergent and additives, dishwashing products, general-purpose cleaning, and other home care products. Our global team of over 2,300 employees drives our capabilities in product development, product formulation, strategic sourcing, manufacturing, packaging design, brand marketing, project management, quality assurance, compliance, distribution, and logistics. Our organization is constantly evolving and is driven by a set of “One KIK” values – a dedication to following through on commitments in a customer-focused, profit-motivated way; while never compromising on safety, ethics, or integrity. KIK is an Equal Employment Opportunity employer. KIK does not discriminate against qualified applicants or employees based on race, color, age, religion, sex, pregnancy, national origin, ancestry, age, physical or mental disability, veteran or uniformed services status, sexual orientation, gender identity or expression, marital status, genetic information or any other status protected by law. KIK is also committed to providing reasonable accommodations for applicants and employees with protected disabilities to the extent required by applicable laws. If you require a reasonable accommodation to participate in the job application, or interview process, or to perform the essential functions of the job, please contact Human Resources immediately. Privacy Policy: https://www.kikcorp.com/privacy-policy-applicant #KIKHouston

Summary This position is primarily responsible for troubleshooting and repairing electrical circuits, power distribution, furnace instrumentation and controls mechanical and hydraulic equipment, machine tools, saws, forging and heat treat furnace equipment, closed die forging presses, manipulators & CNC machine mechanical issues with minimal supervision. In addition, this position is responsible for performing upgrade installation of new equipment as well as preventative and corrective maintenance to improve operational uptime and equipment life. The Maintenance Mechanic will perform a variety of maintenance, repair and continuous improvement functions on various plant equipment with limited direction and guidance. Support manufacturing operations in a spirit of teamwork and cooperation. Troubleshoot and resolve issues in a timely fashion. Safely, professionally and efficiently, complete machine repairs and rebuilds per line-up and documentation. We are an Equal Employment Opportunity employer. All qualified applicants will be considered for employment regardless of age, national origin, race, color, disability, religion, sex, sexual orientation, gender identity or expression, or any other characteristic protected under applicable law. Qualified candidates must have experience maintaining and troubleshooting heavy forging presses, manipulators, furnace combustion components, hydraulic and pneumatic systems and components like pumps, compressor, directional, servo and proportional valves, heat exchangers, filters and cooling tower equipment. Basic electrical knowledge for safe working with various industrial equipment is a must. Minimum Requirements and Qualifications Education and Experience • High School diploma or GED., • Electrician License and Hydraulic/Pneumatic / Millwright related certifications are desirable, • Education and/or Experience with an extensive background in electrical power distribution, forge equipment electrical and control troubleshooting and Forging Facility maintenance., • Experience in CNC Machine Repair is a plus., • Must have strong background in mechanical, electrical, hydraulic, pneumatics, CNC and overall machine troubleshooting skills., • Must have 5 years of experience as Maintenance Mechanic Skills and Abilities • Understanding of Safe working, • Ability to read Mechanical equipment drawings, hydraulic, electrical and pneumatic schematic., • Ability to plan and install conduit., • Allen Bradley PLC (SLC 500, Control Logix and RSView) Knowledge, • Fanuc Controls, Ladder Logic and Celos (Mori Seiki) program experience is a plus., • Ability to write routine reports and correspondence., • Ability to read service manuals to determine safe work procedures, • Ability to use CMMS/E-Maint System., • Knowledge of and experience with Microsoft Office., • Fit bearings, align gears and shafts, attach motors, and connect couplings and belts to precise tolerances., • Align and test equipment and make any necessary adjustments., • Perform predictive and operational procedures, • Repair or replace defective parts, • Service and repair hydraulic and pneumatic systems, • May do some minimum welding (a weld that is adequate in size to temporarily hold components in place until it can be completely welded by a registered apprentice welder or a journeyman welder) and fabrication., • Foresee and identify Critical spare needs and works with maintenance planner to ensure availability of parts in time., • Familiarity with government regulations for industry and safe work practices dealing with machine repair. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Troubleshoot and repair presses, manipulators, machine tools, saws and other plant equipment with minimal supervision using safe techniques and schematics. Perform minimum electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Troubleshoot and repair CNC machinery, presses and equipment with minimal supervision using safe techniques and schematics. Perform electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Operate in response to requests by maintenance supervisor or support personnel and set priorities as required to maximize equipment uptime, • Gather and maintain a complete set of required tools, including calipers, dial indicators, hydraulic and pneumatic testing equipment's, electrical meters and other diagnostic and measurement devices., • Utilize diagnostic tools and techniques to define problem areas and assist with resolution., • Utilize measurement devices to hold print tolerances and industry standards while performing machine repairs and assembly., • Participate in preventive and predictive maintenance programs to improve operational uptime and equipment life. Recommend improvements and/or changes to PM systems/tasks when applicable, • Follow designated work instructions as outlined for specific functions. These include, but are not limited to; PM work orders, continuous improvement tasks, new installation line-ups, and repair/refurbish assignments, • Update drawings/prints, suggest spare parts and suitable replacements, and perform various forms of machine repair/rebuild in a professional manner per line-up and schematics, • Follow standard practices and all governmental regulations and laws relating to powered equipment, • Perform other related duties as assigned by immediate supervisor and management, • Uses CMMS/EMaint /MS office system to document maintenance work including work orders/PM's and Inspections., • Prepare and verify Inventory report on periodical basis

Summary This position is primarily responsible for troubleshooting and repairing electrical circuits, power distribution, furnace instrumentation and controls mechanical and hydraulic equipment, machine tools, saws, forging and heat treat furnace equipment, closed die forging presses, manipulators & CNC machine mechanical issues with minimal supervision. In addition, this position is responsible for performing upgrade installation of new equipment as well as preventative and corrective maintenance to improve operational uptime and equipment life. The Maintenance Mechanic will perform a variety of maintenance, repair and continuous improvement functions on various plant equipment with limited direction and guidance. Support manufacturing operations in a spirit of teamwork and cooperation. Troubleshoot and resolve issues in a timely fashion. Safely, professionally and efficiently, complete machine repairs and rebuilds per line-up and documentation. We are an Equal Employment Opportunity employer. All qualified applicants will be considered for employment regardless of age, national origin, race, color, disability, religion, sex, sexual orientation, gender identity or expression, or any other characteristic protected under applicable law. Qualified candidates must have experience maintaining and troubleshooting heavy forging presses, manipulators, furnace combustion components, hydraulic and pneumatic systems and components like pumps, compressor, directional, servo and proportional valves, heat exchangers, filters and cooling tower equipment. Basic electrical knowledge for safe working with various industrial equipment is a must. Minimum Requirements and Qualifications Education and Experience • High School diploma or GED., • Electrician License and Hydraulic/Pneumatic / Millwright related certifications are desirable, • Education and/or Experience with an extensive background in electrical power distribution, forge equipment electrical and control troubleshooting and Forging Facility maintenance., • Experience in CNC Machine Repair is a plus., • Must have strong background in mechanical, electrical, hydraulic, pneumatics, CNC and overall machine troubleshooting skills., • Must have 5 years of experience as Maintenance Mechanic Skills and Abilities • Understanding of Safe working, • Ability to read Mechanical equipment drawings, hydraulic, electrical and pneumatic schematic., • Ability to plan and install conduit., • Allen Bradley PLC (SLC 500, Control Logix and RSView) Knowledge, • Fanuc Controls, Ladder Logic and Celos (Mori Seiki) program experience is a plus., • Ability to write routine reports and correspondence., • Ability to read service manuals to determine safe work procedures, • Ability to use CMMS/E-Maint System., • Knowledge of and experience with Microsoft Office., • Fit bearings, align gears and shafts, attach motors, and connect couplings and belts to precise tolerances., • Align and test equipment and make any necessary adjustments., • Perform predictive and operational procedures, • Repair or replace defective parts, • Service and repair hydraulic and pneumatic systems, • May do some minimum welding (a weld that is adequate in size to temporarily hold components in place until it can be completely welded by a registered apprentice welder or a journeyman welder) and fabrication., • Foresee and identify Critical spare needs and works with maintenance planner to ensure availability of parts in time., • Familiarity with government regulations for industry and safe work practices dealing with machine repair. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Troubleshoot and repair presses, manipulators, machine tools, saws and other plant equipment with minimal supervision using safe techniques and schematics. Perform minimum electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Troubleshoot and repair CNC machinery, presses and equipment with minimal supervision using safe techniques and schematics. Perform electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Operate in response to requests by maintenance supervisor or support personnel and set priorities as required to maximize equipment uptime, • Gather and maintain a complete set of required tools, including calipers, dial indicators, hydraulic and pneumatic testing equipment's, electrical meters and other diagnostic and measurement devices., • Utilize diagnostic tools and techniques to define problem areas and assist with resolution., • Utilize measurement devices to hold print tolerances and industry standards while performing machine repairs and assembly., • Participate in preventive and predictive maintenance programs to improve operational uptime and equipment life. Recommend improvements and/or changes to PM systems/tasks when applicable, • Follow designated work instructions as outlined for specific functions. These include, but are not limited to; PM work orders, continuous improvement tasks, new installation line-ups, and repair/refurbish assignments, • Update drawings/prints, suggest spare parts and suitable replacements, and perform various forms of machine repair/rebuild in a professional manner per line-up and schematics, • Follow standard practices and all governmental regulations and laws relating to powered equipment, • Perform other related duties as assigned by immediate supervisor and management, • Uses CMMS/EMaint /MS office system to document maintenance work including work orders/PM's and Inspections., • Prepare and verify Inventory report on periodical basis

Job Description Job Purpose The role of the “Industrial Mechanic III” position requires high level mechanical skills to inspect, install, repair and adjust all manufacturing equipment within the facility. It also requires advanced knowledge in fluid power and pneumatic equipment. This includes simple to complex hydraulic systems (w/ some servo components), plant utilities such as high volume water pumps and air compressors. The position also requires high level communication and problem solving skills. Duties & Responsibilities • Maintain a good working relationship with Operating personnel in order to maximize equipment reliability and uptime., • Analytically troubleshoot and resolve mechanical malfunctions back to OEM Specifications., • Routinely check the performance of mechanical equipment., • Properly maintain maintenance records, inspection reports, and processing Work Orders., • Ensure a clean and safe work area. Must follow all PPE policies and safety rules., • Operate within standard operating procedures (SOPs) and Job Safety Analysis (JSAs)., • Assist and participate in continuous improvement programs and the training of other employees., • Attend Line-Out meetings to communicate daily activities between incoming and outgoing Maintenance shift crews., • Make necessary equipment repairs during the shift to maintain equipment availability for production., • Complete Maintenance shift reports and corresponding paper work., • Participate in production startups, shutdowns, and changeovers as it pertains to equipment reliability and availability., • Perform required Daily; Weekly, Quarterly and Annual check sheets as established by the Maintenance Department and O.E.M. suppliers., • Prepares reports, forms, records and related paperwork for assigned area., • Other duties as assigned. Qualifications / Competencies • Education: o High School Diploma/GED o A welding or mechanical maintenance certification or technical degree preferred. • Years of Experience: o 4 – 6 years of experience. • Job Knowledge: o Ability to read documents such as operating and maintenance instructions, procedure/equipment manuals as well as electrical/Mechanical schematic drawings. o Must be proficient in the use oxy/fuel cutting torches and related cutting tools as well as SMAW (Stick), MIG (Wire) and Flux Core welding processes. Must be able to perform these skills in both “field environment conditions” as well as in the Shop. o Fabrication skills should include the ability to layout and accurately calculate measurements for various projects and repairs. The ability to read welding schematics and work from blueprints is a must. o Advanced skills, knowledge and working experience with complex fluid power systems including some level of exposure to servo technology. Strong troubleshooting skills are required as well as the ability to read drawings and schematics on pneumatic and fluid power systems. o Basic understanding of simple electrical circuits as it relates to mechanical equipment and sequencing of mechanical components. o Must be capable of executing welds in all positions with all types of metals and alloys in various shapes, including pipes, structural forms, plates, sheet metal, and bar stock. o Ability to write routine reports and correspondence. o Knowledge of general manufacturing processes, procedures, and machinery preferred. o Knowledge of Word Processing software • Personal Competencies: o Employee must be able to work with a flexible or rotating schedule which may require over-time when needed. o Read, write & speak English in a clear and effective manner. o Ability to communicate effectively with co-workers. o Ability to work in a team environment. • Safety: o Understands all applicable plant safety rules and regulations and makes sure that all are being followed. Physical Requirements & Working conditions • Working conditions are normal for a manufacturing environment., • Loose fitting clothes and jewelry are not permitted on site., • The ability to lift 25/50 pounds regularly., • The ability to respond quickly to sounds., • The ability to move safely over uneven terrain or in confined spaces., • The ability to see and respond to dangerous situations., • The ability to safely climb ladders while carrying 40 pounds., • The ability to work in loud, hot environments/extreme weather while wearing required PPE., • Ability to see 20-20 when corrected., • Ability to identify and distinguish colors.

Job DescriptionService Wire Company, a premier supplier of industrial and utility wire and cable, is currently seeking a Maintenance Supervisor in Houston, TX. If you are looking to join a great organization and a chance to become a part of our growing team, this may be the opportunity for you! Position Summary: The Maintenance Supervisor leads maintenance mechanics and electricians to ensure safe, reliable, and efficient operation of plant equipment and facilities. This role oversees preventive and corrective maintenance, partners with Production to minimize downtime, and ensures compliance with OSHA standards. Responsibilities include scheduling maintenance activities, improving equipment reliability, developing standard procedures, tracking performance metrics, training employees, and supporting continuous improvement and capital projects. Tasks/Duties/Responsibilities: • Leads a team of Maintenance Mechanics & Electricians in predictive & preventative maintenance and machine repair., • Ensure tasks are completed in accordance with OSHA standards and regulations., • Update spare parts file for part numbers creation based on needs and equipment reliability., • Ensures maintenance is scheduled in a timely manner and works closely with Production to schedule and accomplish equipment and facility repairs., • Develop and/or maintain Key Performance Indicators for tracking and reporting the performance of the maintenance function (downtime tracking, work order creation and coordination, repetitive maintenance requests, maintenance responsiveness)., • Provides long-term solutions and day-to-day support to all operating teams having issues with troubleshooting, problem analysis, equipment failures, etc., • Trains employees in proper work methods and safety procedures., • Utilize learned experiences to spread knowledge across shifts, ensuring all maintenance department learns on how to solve and address specific issues on each equipment., • Develop SOP to standardize troubleshooting techniques., • Maintains accurate records of maintenance work performed and inventory., • Sends daily reports to operational team on PM and equipment status., • Modification of PM frequencies based on known/documented failure(s) history., • OEM best-practices and feedback from mechanics/inspections., • Facilitate mechanic and operator inspections., • Creation of nonscheduled work orders, maintain history of repairs and parts used., • Identify capital needs and solutions focused on operational improvements within the facility., • Submit purchase requests based on projects and equipment reliability., • Participate in securing project job bids process and providing recommendations.Knowledge/Skills/Requirements:, • High school diploma or equivalent and 3+ years of maintenance or process/project engineering experience required., • Bachelor’s Degree in Engineering and previous leadership experience preferred., • Strong sense of urgency and decision making, capability to adapt with good planning and priority setting skills., • Experience with process controls and extrusion., • Advanced troubleshooting techniques in mechanical and electrical fields (e.g. PLCs, instrumentation, gearboxes, extruders, dryers, mixers, vacuums, pumps, etc.), • Thorough knowledge of maintenance systems, work order processes, preventive/predictive maintenance, TPM, inventory and scheduling software preferred., • Strong leadership skills (conflict resolution, facilitation, change management skills, decision making, empowerment and delegation) preferred., • Strong written and verbal communication skills., • Proficient with MS Word, Excel, and Outlook.Reports To:, • Plant Maintenance EngineerThe perks of joining our Team, • Comprehensive Insurance Options - Competitive medical coverage with a variety of plan choices., • Progressive PTO & Paid Holidays - Tenure-based paid time off plus eight paid holidays annually, • 401(k) with Company Match + Profit Sharing - Matching 5% on 6% of employee contributions and annual profit‑sharing contributions., • Career Growth & Learning Support - Tuition reimbursement and employee assistance programs., • Referral Bonus Program - Employee referral bonuses paid out over the new hire's first year., • See all benefits we offer here

Summary This position is primarily responsible for troubleshooting and repairing electrical circuits, power distribution, furnace instrumentation and controls mechanical and hydraulic equipment, machine tools, saws, forging and heat treat furnace equipment, closed die forging presses, manipulators & CNC machine mechanical issues with minimal supervision. In addition, this position is responsible for performing upgrade installation of new equipment as well as preventative and corrective maintenance to improve operational uptime and equipment life. The Maintenance Mechanic will perform a variety of maintenance, repair and continuous improvement functions on various plant equipment with limited direction and guidance. Support manufacturing operations in a spirit of teamwork and cooperation. Troubleshoot and resolve issues in a timely fashion. Safely, professionally and efficiently, complete machine repairs and rebuilds per line-up and documentation. We are an Equal Employment Opportunity employer. All qualified applicants will be considered for employment regardless of age, national origin, race, color, disability, religion, sex, sexual orientation, gender identity or expression, or any other characteristic protected under applicable law. Qualified candidates must have experience maintaining and troubleshooting heavy forging presses, manipulators, furnace combustion components, hydraulic and pneumatic systems and components like pumps, compressor, directional, servo and proportional valves, heat exchangers, filters and cooling tower equipment. Basic electrical knowledge for safe working with various industrial equipment is a must. Minimum Requirements and Qualifications Education and Experience • High School diploma or GED., • Electrician License and Hydraulic/Pneumatic / Millwright related certifications are desirable, • Education and/or Experience with an extensive background in electrical power distribution, forge equipment electrical and control troubleshooting and Forging Facility maintenance., • Experience in CNC Machine Repair is a plus., • Must have strong background in mechanical, electrical, hydraulic, pneumatics, CNC and overall machine troubleshooting skills., • Must have 5 years of experience as Maintenance Mechanic Skills and Abilities • Understanding of Safe working, • Ability to read Mechanical equipment drawings, hydraulic, electrical and pneumatic schematic., • Ability to plan and install conduit., • Allen Bradley PLC (SLC 500, Control Logix and RSView) Knowledge, • Fanuc Controls, Ladder Logic and Celos (Mori Seiki) program experience is a plus., • Ability to write routine reports and correspondence., • Ability to read service manuals to determine safe work procedures, • Ability to use CMMS/E-Maint System., • Knowledge of and experience with Microsoft Office., • Fit bearings, align gears and shafts, attach motors, and connect couplings and belts to precise tolerances., • Align and test equipment and make any necessary adjustments., • Perform predictive and operational procedures, • Repair or replace defective parts, • Service and repair hydraulic and pneumatic systems, • May do some minimum welding (a weld that is adequate in size to temporarily hold components in place until it can be completely welded by a registered apprentice welder or a journeyman welder) and fabrication., • Foresee and identify Critical spare needs and works with maintenance planner to ensure availability of parts in time., • Familiarity with government regulations for industry and safe work practices dealing with machine repair. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Troubleshoot and repair presses, manipulators, machine tools, saws and other plant equipment with minimal supervision using safe techniques and schematics. Perform minimum electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Troubleshoot and repair CNC machinery, presses and equipment with minimal supervision using safe techniques and schematics. Perform electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Operate in response to requests by maintenance supervisor or support personnel and set priorities as required to maximize equipment uptime, • Gather and maintain a complete set of required tools, including calipers, dial indicators, hydraulic and pneumatic testing equipment's, electrical meters and other diagnostic and measurement devices., • Utilize diagnostic tools and techniques to define problem areas and assist with resolution., • Utilize measurement devices to hold print tolerances and industry standards while performing machine repairs and assembly., • Participate in preventive and predictive maintenance programs to improve operational uptime and equipment life. Recommend improvements and/or changes to PM systems/tasks when applicable, • Follow designated work instructions as outlined for specific functions. These include, but are not limited to; PM work orders, continuous improvement tasks, new installation line-ups, and repair/refurbish assignments, • Update drawings/prints, suggest spare parts and suitable replacements, and perform various forms of machine repair/rebuild in a professional manner per line-up and schematics, • Follow standard practices and all governmental regulations and laws relating to powered equipment, • Perform other related duties as assigned by immediate supervisor and management, • Uses CMMS/EMaint /MS office system to document maintenance work including work orders/PM's and Inspections., • Prepare and verify Inventory report on periodical basis

Job DescriptionSalary: Blackstone is an innovative service company supporting both reciprocating and rotational equipment throughout its lifecycle. Blackstone supplies field services, parts, and repair for a wide range of industrial rotating and static equipment. Blackstone specializes in repair, maintenance, commissioning, turnaround, overhaul, installation, and engineering services for critical rotating equipment and pipeline maintenance. Founded on the principles of professionalism, experience, and superior customer service, Blackstone provides a service offering that is done right the first time to minimize downtime and that is completed by a team that demonstrates zero-incident safety practices. Our commitment to servicing our clients is the foundation of long-term and respectful working relationships. Our clients choose us for our highly qualified staff, with their deep body of knowledge and value-added work ethic. Our people are the backbone of our success, providing consistent quality and a transparent approach. For further information about our company, please visit our website: blackstoneindustrial.com. Are you looking to expand your experience? Blackstone Repair Services is seeking Professionals with Industrial Equipment Experience to be part of our Project Coordination Team. If you possess hands-on technical experience, alongside project coordination. We are the opportunity you have been waiting for! Responsibilities • Lead and coordinate projects related to the repair and maintenance of rotating equipment along with other functional equipment as needed. Ensure adherence to timelines, budgets, and quality standards., • Leverage your expertise in the repair, maintenance, and guidance support to project teams, overseeing assembly/part design, fabrication and completion of projects., • Collaborate and work with internal team members to help put together quotes for jobs as needed., • Effectively manage resources, to optimize project efficiency. Coordinate with customers, internal Opps teams and external vendors as needed to drive projects., • Responsible for the sourcing and ordering of tools and materials required to complete jobs as needed., • Maintain accurate project documentation, including project plans, progress reports, and technical specifications. Provide regular updates on project status and milestones., • Follow a quality assurance process to guarantee the highest standards in the repair and maintenance of reciprocating equipment. Conduct inspections and audits as necessary., • Prepare work instruction packages for inspections to be completed on equipment. Along with data evaluation and repair recommendations as needed. Qualifications • Mechanical Engineering Technology Diploma or equivalent education preferred, Journeyman Industrial Mechanic certification or 5 plus years of detailed experience with rotating equipment., • Proven experience in coordinating technical projects, with a focus on the repair and maintenance of rotating equipment., • Strong technical knowledge of rotating equipment and associated equipment., • Excellent organizational, project management, and communication skills are important to the success of this role., • Ability to work collaboratively in a team environment is a must., • Attention to accurate details and a commitment to delivering high-quality results., • Familiarity with relevant industry regulations and standards. API standards, • Other duties as assigned If you are a motivated and experienced Individual with Project Coordination Experience, we invite you to apply for this exciting opportunity. Join our team and contribute to the success of Blackstone Repair Services. To apply, please submit your resume and a cover letter outlining your relevant experience.

Job Description Pay = $18.00 to $25.00 per hour. Very dependent on experience. Mechanic / Trailer Tech As a Trucking Mechanic or Trailer Tech, you're the one who keeps the equipment safe and operational. Your day is filled with a range of problem solving and mechanical challenges. Whether you're pulling injectors or welding a damaged trailer, you're ready to tackle any obstacle to keep the fleet running. You gain satisfaction from identifying problems, crafting solutions, and aggressively completing work to ensure the 60 years of exceptional customer service continues. Description As a Mechanic / Trailer Tech, you work with Operations and Drivers to ensure a safe and operational fleet. When equipment needs service, you quickly assess the situation. Often you take care of the situation with a solution on the spot, using your mechanical knowledge. The entire team benefits from your commitment to providing the best care for our team and fleet. By helping maintain a strong focus on safety and preventive maintenance, the Mechanic / Shop Assistant is instrumental to the team’s success. Responsibilities: Repair trucks, trailers, and other equipment Repair and maintain tanker trailers including leak checks, rebuilding valves, and prep for shipments. Ability to assess safety and mechanical issues, then provide solutions or refer them to other team members Perform routine vehicle maintenance Use diagnostic tools to test vehicle components Perform quality inspections prior to returning the vehicle to the customer Flexibility to perform different tasks from engine work to shop clean up Ability to embrace the challenge of balancing preventive maintenance with addressing equipment failures Qualifications: Previous experience as a diesel mechanic preferred Knowledge of shop equipment Basic welding skills Strong mechanical aptitude and troubleshooting skills Deadline and detail-oriented Ability to thrive in a fast-paced environment Must be a person with integrity who brings a positive attitude to the office every day. You maintain composure and safety focus while troubleshooting and solving issues. You can work unsupervised when delivering potential solutions. Additional Information: Pay depending depending on experience. Benefits include – Vacation, Medical Insurance, and 401k Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Employee discount Health insurance Health savings account Life insurance Paid time off Retirement plan Vision insurance Company DescriptionSkilled Craftsmen of Texas, Inc. is a premier industrial staffing service for the Greater Houston and DFW area and we have just opened an office in Arlington. Our customer base consists of some of the World’s largest manufactures as well as the small to medium sized companies. We can help you find the dream job that you have been looking for. We are searching for individuals that are highly motivated, willing to learn, and are looking for a challenge.Skilled Craftsmen of Texas, Inc. is a premier industrial staffing service for the Greater Houston and DFW area and we have just opened an office in Arlington. Our customer base consists of some of the World’s largest manufactures as well as the small to medium sized companies. We can help you find the dream job that you have been looking for. We are searching for individuals that are highly motivated, willing to learn, and are looking for a challenge.

Job Description Do you have the need for speed? Do you thrive in a fast paced, energetic work environment that focuses on serving our customers? If so, K1 Speed is the place for you. As the nation’s indoor electric karting leader and innovator for over the past decade, K1 Speed does not compromise on the quality and value of the product we offer. Through our industrial go-karts and excellent staff, our passion is to show the world how fun karting can actually be. As a Mechanic , you will service and maintain our fleet of state-of-the-art, high performance, high speed electric go karts. The right candidate will have a track record of mechanical repair experience, preferably in the golf kart, go kart, motorcycle, or motorsports field, and will be self-motivated and be able to work in a fast-paced environment. Is this you? Duties and Responsibilities • Perform opening track and kart repairs and performance checks, • Maintain kart performance throughout the day, • Maintain track and facility appearance and functionality, • Keep accurate documentation of repairs, parts inventory, and special projects, • Responsibly maintain supply of tools and machinery, • Respond to emergency situations as they arise, • Ensure that the pit, kart shop and track areas remain clean and safe, • Assist the track crew with track operations in limited situations, • Perform specific facility cleaning and maintenance duties as assigned by management, • Perform closing duties to secure the pit and track and prepare for the following day's operation, • Ability to define problems, collect data, establish facts, and draw valid conclusions. Job Requirements • Must be at least 18 years of age, • High school diploma or general education degree (GED); or 1 to 3 months related experience and/or training; or equivalent combination of education and experience., • A Drug Test and Background Check is required prior to employment, • Provide proof of identity and eligibility to work in the United States, • Weekends are a must! Physical Demands • Standing over 2/3 of time, • Walking over 2/3 of time, • Lifting is required

Job Description Description This position is primarily responsible for repair and maintenance of forklifts, heavy equipment and trucks in accordance with factory and industry standards, run diagnostics where applicable, and work closely with other team members to meet company goals. DIESEL MECHANIC QUALIFICATIONS: • 1-3 years’ experience, • Ability to work flexible and/or extended hours and weekends (normal schedule: 45 hrs), • Ability to pass a background check and drug screen, • Stable work history, • Reliable transportation, • Committed to working safely at all times including a commitment to the policies and procedures of the operation, • Positive attitude; good team player, • Knowledge of Diesel Engine and Hydraulic System diagnostics and preventive maintenance Qualifications DIESEL MECHANIC RESPONSIBILITIES: • Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications., • Repair and replace damaged or worn parts., • Operate and inspect machines or heavy equipment in order to diagnose defects., • Diagnose faults or malfunctions to determine required repairs., • Dismantle and reassemble heavy equipment using hoists and hand tools., • Clean, lubricate, and perform other routine maintenance work on equipment and vehicles., • Examine parts for damage or excessive wear, using micrometers and gauges., • Schedule maintenance for industrial machines and equipment, and keep equipment service records., • Read and understand operating manuals, blueprints, and technical drawings., • Overhaul and test machines or equipment to ensure operating efficiency., • Adjust, maintain, and repair or replace subassemblies, such as transmissions and crawler heads, using hand tools, jacks, and cranes., • Adjust and maintain industrial machinery, using control and regulating devices., • Observe all safety precautions and wear appropriate PPE at all times, • Cross-train on alternate assignments and perform duties in other work areas as needed, • Maintain Housekeeping in assigned work area, • Any other duties as requested by respective supervisor and/or manager DIESEL MECHANIC PHYSICAL REQUIREMENTS: • Must be able to lift up to 50 lbs. and frequently exert 100 lbs. of force to push, and pull or otherwise move objects, • Work involves long periods of standing, squatting, bending, twisting and reaching; may also include climbing, • Must be able to work in extreme weather conditions – heat, cold, rain, • Good manual dexterity, including the ability to make precise finger movements and the ability to keep arms and hands steady., • Need normal vision and hearingCompany DescriptionTexas Pipe & Supply has been offering quality distribution services to clients big and small since 1918. Our knowledge provides a solid foundation for creating long-lasting professional relationships. A time-tested company, Texas Pipe & Supply skillfully executes the complexities of industrial distribution, paired with personalized service for every client.Texas Pipe & Supply has been offering quality distribution services to clients big and small since 1918. Our knowledge provides a solid foundation for creating long-lasting professional relationships. A time-tested company, Texas Pipe & Supply skillfully executes the complexities of industrial distribution, paired with personalized service for every client.

Job DescriptionJob Title: Mechanic PRIMARY FUNCTION: The Mechanic position supports the branch, and client, in all maintenance and repair of industrial equipment needs. This position ensures that all rental equipment maintenance and repair needs of the branch is conducted in an efficient, accurate, and timely manner. This role provides a great opportunity to learn and grow within our service department and beyond. REQUIREMENTS: • 3 years’ experience as a Mechanic is required., • Must be mechanically inclined with mechanical background and some knowledge of the following engines., • John Deere, • Volvo, • Kohler, • Yanmar, • Deutz, • Perkins, • Caterpillar, • Must be able to travel locally and regionally, work overtime, and be on a rotating on call schedule., • Must have a valid state driver’s license with a moderately clean driving record., • Must be able to frequently lift 50+ lbs., • Knowledge of tier 4 engines and the use of Service Advisor and Diesel Laptops a plus. PRIMARY DUTIES: • Performs maintenance and repairs of pumps and other equipment in both the shop and in the field., • Act as a liaison between customers, and other departments of the branch, to ensure customer expectations are met and exceeded in terms of rental equipment maintenance and repair., • Trouble shoot all rental equipment for most efficient way to get equipment back online., • Maintain professional and ethical business relationships with all customers and co-workers following the established company policies and procedures., • Produce all required service tickets and/or documentation accurately, completely, and in a timely manner., • Communicates with team for coordinating delivery and pickup of parts, equipment, and accessories., • Be an ambassador for safety, making sure all work is done in the safest manner., • Continuous growth of knowledge for all Company products, inventory, and delivery capabilities, • Maintain a clean work environment., • Performs other tasks and duties as assigned by Management. Full breakdown of the position's physical requirements are attached. National Tank & Equipment is an Equal Opportunity Company.

Job DescriptionBuilding Texas… Powering the World. Since 1952, Mustang has proudly served the construction, oil & gas, power generation, marine, and manufacturing industries as the authorized Caterpillar® dealer for Southeast Texas. Start your career with Mustang Cat - one of America's Greatest Midsize Workplaces of 2025! Mustang Rental Services is hiring Rental Equipment Technicians/Mechanics across all skill levels for Shop Service and Field Service positions. Rental Equipment Technician/Mechanic Benefits Include: • Up to $2000 Sign-On Bonus, • Great Work-Life Balance, • Boot & Tool Allowances, • Tuition Reimbursement, • Vast Growth Opportunities, • Job Stability, • Full-Time Benefits to Include: Medical, Dental, Vision, • 401(k) Employer Matching, • Paid Vacation, Sick Time, Holidays, • Potential Eligibility for Technician Review Program (Ask a recruiter today!) As a Rental Equipment Technician/Mechanic, your primary responsibility is to perform maintenance and repairs on Mustang's fleet of rental equipment. Rental Equipment Technician/Mechanic Position Requirements: • Must own proper tools to perform necessary repairs, • High school graduate or equivalent, • Previous mechanic work or military experience, • Understanding of diesel, electrical, and hydraulic systems, • Ability to demonstrate technical, mechanical, and troubleshooting abilities to define and perform necessary repairs Additional Experience Strongly Preferred for Rental Equipment Technicians/Mechanics: • Associates degree or certificate from a technical school, • Mechanic experience on heavy and light construction equipment, • Mechanic experience on aerial and man lift equipment, • Technical experience with hydraulic pumps, valves, and motors, • Welding experience Rental Equipment Technician/Mechanic levels and compensation rates are determined by skill set, knowledge, and experience. Curious to hear what it's like to be an industrial machinery technician/mechanic at Mustang Cat? Hear firsthand from some of our current engine technicians. #MustangZip Company DescriptionWith its headquarters in Houston, Texas, Mustang® Cat is a privately-held Cat dealership that has been at the forefront of construction and power systems equipment for 70 years. Since its founding in 1952, Mustang Cat has supported numerous projects that have shaped the footprint of Houston. Mustang’s equipment has played a vital role in building landmarks such as the Houston Astrodome, Beltway 8, and the downtown skyline. Mustang continues to enhance the Houston area by supporting customers in constructing the Northwest Freeway (290) expansion project and State Highway 99 (Grand Parkway). In addition to paving roadways and highways, Mustang’s power systems division generates power for numerous facilities throughout the Houston area, including hospitals, education facilities, municipalities, commercial businesses, and other industries that need power. Recent expansions to power systems equipment, including electric power generation, gas compression pumps, transmissions, and other power equipment, continue to provide focused solutions for our different customer market segments.With its headquarters in Houston, Texas, Mustang® Cat is a privately-held Cat dealership that has been at the forefront of construction and power systems equipment for 70 years. \r\n\r\nSince its founding in 1952, Mustang Cat has supported numerous projects that have shaped the footprint of Houston. Mustang’s equipment has played a vital role in building landmarks such as the Houston Astrodome, Beltway 8, and the downtown skyline. Mustang continues to enhance the Houston area by supporting customers in constructing the Northwest Freeway (290) expansion project and State Highway 99 (Grand Parkway).\r\n\r\nIn addition to paving roadways and highways, Mustang’s power systems division generates power for numerous facilities throughout the Houston area, including hospitals, education facilities, municipalities, commercial businesses, and other industries that need power. Recent expansions to power systems equipment, including electric power generation, gas compression pumps, transmissions, and other power equipment, continue to provide focused solutions for our different customer market segments.

Summary This position is primarily responsible for troubleshooting and repairing electrical circuits, power distribution, furnace instrumentation and controls mechanical and hydraulic equipment, machine tools, saws, forging and heat treat furnace equipment, closed die forging presses, manipulators & CNC machine mechanical issues with minimal supervision. In addition, this position is responsible for performing upgrade installation of new equipment as well as preventative and corrective maintenance to improve operational uptime and equipment life. The Maintenance Mechanic will perform a variety of maintenance, repair and continuous improvement functions on various plant equipment with limited direction and guidance. Support manufacturing operations in a spirit of teamwork and cooperation. Troubleshoot and resolve issues in a timely fashion. Safely, professionally and efficiently, complete machine repairs and rebuilds per line-up and documentation. We are an Equal Employment Opportunity employer. All qualified applicants will be considered for employment regardless of age, national origin, race, color, disability, religion, sex, sexual orientation, gender identity or expression, or any other characteristic protected under applicable law. Qualified candidates must have experience maintaining and troubleshooting heavy forging presses, manipulators, furnace combustion components, hydraulic and pneumatic systems and components like pumps, compressor, directional, servo and proportional valves, heat exchangers, filters and cooling tower equipment. Basic electrical knowledge for safe working with various industrial equipment is a must. Minimum Requirements and Qualifications Education and Experience • High School diploma or GED., • Electrician License and Hydraulic/Pneumatic / Millwright related certifications are desirable, • Education and/or Experience with an extensive background in electrical power distribution, forge equipment electrical and control troubleshooting and Forging Facility maintenance., • Experience in CNC Machine Repair is a plus., • Must have strong background in mechanical, electrical, hydraulic, pneumatics, CNC and overall machine troubleshooting skills., • Must have 5 years of experience as Maintenance Mechanic Skills and Abilities • Understanding of Safe working, • Ability to read Mechanical equipment drawings, hydraulic, electrical and pneumatic schematic., • Ability to plan and install conduit., • Allen Bradley PLC (SLC 500, Control Logix and RSView) Knowledge, • Fanuc Controls, Ladder Logic and Celos (Mori Seiki) program experience is a plus., • Ability to write routine reports and correspondence., • Ability to read service manuals to determine safe work procedures, • Ability to use CMMS/E-Maint System., • Knowledge of and experience with Microsoft Office., • Fit bearings, align gears and shafts, attach motors, and connect couplings and belts to precise tolerances., • Align and test equipment and make any necessary adjustments., • Perform predictive and operational procedures, • Repair or replace defective parts, • Service and repair hydraulic and pneumatic systems, • May do some minimum welding (a weld that is adequate in size to temporarily hold components in place until it can be completely welded by a registered apprentice welder or a journeyman welder) and fabrication., • Foresee and identify Critical spare needs and works with maintenance planner to ensure availability of parts in time., • Familiarity with government regulations for industry and safe work practices dealing with machine repair. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Troubleshoot and repair presses, manipulators, machine tools, saws and other plant equipment with minimal supervision using safe techniques and schematics. Perform minimum electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Troubleshoot and repair CNC machinery, presses and equipment with minimal supervision using safe techniques and schematics. Perform electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Operate in response to requests by maintenance supervisor or support personnel and set priorities as required to maximize equipment uptime, • Gather and maintain a complete set of required tools, including calipers, dial indicators, hydraulic and pneumatic testing equipment's, electrical meters and other diagnostic and measurement devices., • Utilize diagnostic tools and techniques to define problem areas and assist with resolution., • Utilize measurement devices to hold print tolerances and industry standards while performing machine repairs and assembly., • Participate in preventive and predictive maintenance programs to improve operational uptime and equipment life. Recommend improvements and/or changes to PM systems/tasks when applicable, • Follow designated work instructions as outlined for specific functions. These include, but are not limited to; PM work orders, continuous improvement tasks, new installation line-ups, and repair/refurbish assignments, • Update drawings/prints, suggest spare parts and suitable replacements, and perform various forms of machine repair/rebuild in a professional manner per line-up and schematics, • Follow standard practices and all governmental regulations and laws relating to powered equipment, • Perform other related duties as assigned by immediate supervisor and management, • Uses CMMS/EMaint /MS office system to document maintenance work including work orders/PM's and Inspections., • Prepare and verify Inventory report on periodical basis

Summary This position is primarily responsible for troubleshooting and repairing electrical circuits, power distribution, furnace instrumentation and controls mechanical and hydraulic equipment, machine tools, saws, forging and heat treat furnace equipment, closed die forging presses, manipulators & CNC machine mechanical issues with minimal supervision. In addition, this position is responsible for performing upgrade installation of new equipment as well as preventative and corrective maintenance to improve operational uptime and equipment life. The Maintenance Mechanic will perform a variety of maintenance, repair and continuous improvement functions on various plant equipment with limited direction and guidance. Support manufacturing operations in a spirit of teamwork and cooperation. Troubleshoot and resolve issues in a timely fashion. Safely, professionally and efficiently, complete machine repairs and rebuilds per line-up and documentation. We are an Equal Employment Opportunity employer. All qualified applicants will be considered for employment regardless of age, national origin, race, color, disability, religion, sex, sexual orientation, gender identity or expression, or any other characteristic protected under applicable law. Qualified candidates must have experience maintaining and troubleshooting heavy forging presses, manipulators, furnace combustion components, hydraulic and pneumatic systems and components like pumps, compressor, directional, servo and proportional valves, heat exchangers, filters and cooling tower equipment. Basic electrical knowledge for safe working with various industrial equipment is a must. Minimum Requirements and Qualifications Education and Experience • High School diploma or GED., • Electrician License and Hydraulic/Pneumatic / Millwright related certifications are desirable, • Education and/or Experience with an extensive background in electrical power distribution, forge equipment electrical and control troubleshooting and Forging Facility maintenance., • Experience in CNC Machine Repair is a plus., • Must have strong background in mechanical, electrical, hydraulic, pneumatics, CNC and overall machine troubleshooting skills., • Must have 5 years of experience as Maintenance Mechanic Skills and Abilities • Understanding of Safe working, • Ability to read Mechanical equipment drawings, hydraulic, electrical and pneumatic schematic., • Ability to plan and install conduit., • Allen Bradley PLC (SLC 500, Control Logix and RSView) Knowledge, • Fanuc Controls, Ladder Logic and Celos (Mori Seiki) program experience is a plus., • Ability to write routine reports and correspondence., • Ability to read service manuals to determine safe work procedures, • Ability to use CMMS/E-Maint System., • Knowledge of and experience with Microsoft Office., • Fit bearings, align gears and shafts, attach motors, and connect couplings and belts to precise tolerances., • Align and test equipment and make any necessary adjustments., • Perform predictive and operational procedures, • Repair or replace defective parts, • Service and repair hydraulic and pneumatic systems, • May do some minimum welding (a weld that is adequate in size to temporarily hold components in place until it can be completely welded by a registered apprentice welder or a journeyman welder) and fabrication., • Foresee and identify Critical spare needs and works with maintenance planner to ensure availability of parts in time., • Familiarity with government regulations for industry and safe work practices dealing with machine repair. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Troubleshoot and repair presses, manipulators, machine tools, saws and other plant equipment with minimal supervision using safe techniques and schematics. Perform minimum electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Troubleshoot and repair CNC machinery, presses and equipment with minimal supervision using safe techniques and schematics. Perform electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Operate in response to requests by maintenance supervisor or support personnel and set priorities as required to maximize equipment uptime, • Gather and maintain a complete set of required tools, including calipers, dial indicators, hydraulic and pneumatic testing equipment's, electrical meters and other diagnostic and measurement devices., • Utilize diagnostic tools and techniques to define problem areas and assist with resolution., • Utilize measurement devices to hold print tolerances and industry standards while performing machine repairs and assembly., • Participate in preventive and predictive maintenance programs to improve operational uptime and equipment life. Recommend improvements and/or changes to PM systems/tasks when applicable, • Follow designated work instructions as outlined for specific functions. These include, but are not limited to; PM work orders, continuous improvement tasks, new installation line-ups, and repair/refurbish assignments, • Update drawings/prints, suggest spare parts and suitable replacements, and perform various forms of machine repair/rebuild in a professional manner per line-up and schematics, • Follow standard practices and all governmental regulations and laws relating to powered equipment, • Perform other related duties as assigned by immediate supervisor and management, • Uses CMMS/EMaint /MS office system to document maintenance work including work orders/PM's and Inspections., • Prepare and verify Inventory report on periodical basis

Job Description Primoris Energy Services is currently seeking experienced Pipefitters for ongoing and upcoming project(s) across Texas. In this role, you will be responsible for installing, assembling, and maintaining piping systems while working safely and efficiently as part of a skilled crew. We are actively identifying qualified candidates to build our pipeline — selected individuals will receive an exclusive invitation to attend our upcoming Cinco de Mayo Hiring Event, where you’ll have the opportunity to connect directly with our team and get aligned with current and future work. Apply now to be considered as we finalize our list of invited candidates! Job Description Lays out, fabricates, assembles, installs, and maintains piping systems, pipe supports, fixtures, and equipment for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial processing systems. General Requirements Practice all safety rules. Follow verbal and written instructions. Safely use hand and power tools. Report to and assist immediate supervisor. Perform quality work as determined by project specifications. Account for all tools and materials at the end of your shift. Work well as part of a team. Functional Requirements Selects size and type of pipe and related material and equipment according to job specifications. Inspects worksite to avoid structural weaknesses. Plans sequence of installation to avoid obstructions and interference with other workers. Cuts, threads, and bends pipe. Mounts pipe hangers and brackets on walls and ceilings. Assembles and installs a variety of metal or nonmetal pipes and pipe fittings. Joins pipe using threaded, caulked, soldering, brazing, fused, or cemented joints. Installs and maintains refrigeration and air conditioning systems. Tests piping systems for leaks. Secures pipes to structure with brackets, clamps, and hangers. Welds pipe supports to structural steel members. May observe production machines to detect malfunctions or verify repairs (if certified). May assist in lifting, positioning, and securing material during installation. Perform minor maintenance and cleaning of tools/equipment. Respiratory protection may be required. Other duties as assigned. Qualification Standards 1–4 years of experience in pipefitting (depending on mechanic level). Successful completion of craft test. Pass post-offer drug/alcohol screen and physical evaluation and background check. Ability to meet client job site safety requirements (clean shaven, long sleeves, steel toe boots, etc.). Physical Requirements Ability to lift/carry up to 50 lbs. (assistance recommended for heavier loads). Stand/walk for long periods and work extended hours on uneven surfaces. Climb ladders, scaffolds, and work at heights or in confined spaces. Wear respirator and other PPE as required. Work Environment Industrial construction site. Exposure to outdoor elements (heat, cold, rain, humidity). Noise levels from tools and equipment. Possible exposure to chemical substances. Benefits • Competitive compensation paid weekly, • Best-in-class; Medical, Dental, Vision, and LTD/STD, • 401(k) with company match, vested day-one, • Employee Stock Purchase Plan [ESPP], • Tuition Reimbursement, • Pet Coverage "For our Furry Friends", • Legal Assistance Coverage, • Award winning safety programsCompany Overview Primoris was formed in 2004 as the parent company and is traded on the NYSE under the symbol PRIM. We provide a wide range of construction, maintenance, and engineering services for power generation, oil and gas, chemical, pipeline, utilities and distribution, and civil infrastructure clients. Primoris is ranked in the top 1% of the prestigious Top 600 Specialty Contractors List by Engineering News-Record (ENR), having built projects throughout the U.S. and Canada. For additional information, please visit www.prim.com. Primoris Energy Services is a major direct-hire contractor in the U.S. delivering self-performed turnkey industrial construction and EPC services. We offer these services to our clients within the refining, gas processing, chemical/petrochemical, hydrogen, power generation, mining, pulp and paper industries from the first groundbreaking activity all the way through commissioning and start-up of the project. Primoris forms a partnership with our customers and major stakeholders from early-stage engineering through construction completion and commercial operation, safely, on-time, and within budget. Third-Party Agency Notice Primoris will not accept any unsolicited resumes from any third-party recruiting agencies either domestic or international. Primoris nor its subsidiaries will be responsible for any fees from the use of any unsolicited resumes either through our ATS or via electronic mail systems from any agency representative or agency consultant unless your firm is an approved vendor partner with a current executed agreement.

Job Description Industrial Mechanic IMSCO Technical – Industrial Mechanical Services Company. For over 75 years, Purvis Industries has been proud to be a family-owned and operated industrial distributor that does business the old-fashioned way: sell quality, top-tier manufacturers, know the products and the application challenges the products solve, and have the product available on the local branches' shelf. Today, the company has 101 locations in 17 states and is one of the most significant independent bearing and power transmission distributors in the country. As we grow and continue to expand, our customers find that we stay true to what George Purvis told us more than 75 years ago: if you sell the best products, know the products and how to apply them and keep those products on your shelf so you can take care of your customer, you will be successful. Let Purvis Industries show you how we practice these principles daily! The Industrial Mechanic will be working with a Team of trained Industrial Mechanics, in innumerable types of Industrial settings. This will include the use all types of Industrial Hand Tools and Motorized Industrial Equipment. With a collective goal to complete each project within the defined the scope and in the time parameters allowed, without compromising the safety of your other team members or the quality of the work provided. The following is a list of job duties for an Industrial Mechanic. These responsibilities and physical requirements include, but are not limited to, the following: Responsibilities: • Will report to Project Manager for Job assignments., • Will report to Job Lead on site., • Will communicate with Project Manager, and Job Lead., • Will communicate effectively In Person, by Telephone or by Computer., • Will be responsible for meeting personal Safety, Safety Training, and complying with all Safety requirements., • Will be required to Travel. Core Requirements: • Industrial Mechanic - Millwright with 1-5 years of experience in Industrial setting., • Proficient at Welding and Metal Fabrication in Industrial setting preferred., • Proficient with all types of Hand Tools, Power Tools, Measuring Tools used in Industrial Maintenance, Building Erection and Equipment Installation., • Able to align, assemble, and dissemble machinery, troubleshoot mechanical issues and perform routine maintenance., • Able to adapt quickly and follow Job Lead’s directions to complete project in safe and timely manner., • Physical ability to perform tasks that may require prolonged standing, sitting, and other activities necessary to perform job duties., • Employee must be able to lift products to 70lbs daily., • Must have Valid Driver’s License., • Must be able to pass Drug test., • Must be able to pass a background check., • Legally Authorized to work in the US. Benefits • Paid time off, • 401(k) enrollment, • Health insurance, • Dental Insurance, • Vision insurance, • Life Insurance, • Ability to set up a Flexible Spending Account You will be a valued member of a stable and established company. We are committed to our employee’s professional development and will provide you with ongoing training and opportunities for advancement. Purvis Industries, an Equal Opportunity Employer, promotes a drug-free workplace.

Are you looking to power the next leap in the exciting world of advanced electronics? Do you want to help solve problems that drive success in the rapidly evolving technology and connectivity landscape? Then bring your problem-solving, passion, and creativity to help us power the next leap in electronics. At Qnity,we're more than a global leader in materials and solutions for advanced electronics and high-tech industries - we're a tight-knit team that is motivated by new possibilities, and always up for a challenge. All our dedicated teams contribute to making cutting-edge technology possible. We value forward-thinking challengers, boundary-pushers, and diverse perspectives across all our departments, because we know we play a critical role in the world enabling faster progress for all. Learn how you can start or jumpstart your career with us. Qnity is a technology leader serving the semiconductor, circuit board, industrial, display, digital and flexographic printing, healthcare, aerospace, industrial and transportation industries. The Bayport Plant takes pride in our materials that enable designs to be smaller, more complex, more reliable, and more powerful than ever imagined. Every day, we're honored to be our customers' partner of choice. The Bayport Plant is split between indoor and outdoor, lower hazard manufacturing. The site continually works toward a more sustainable presence in our local community and for our customers. The Bayport Operator/Mechanic monitors and operates equipment and facilities, including field equipment, insuring quality, and conformance with standard operating procedures. Always maintains safety standards and initiates and follows emergency procedures when necessary. Performs basic maintenance repair and upkeep on area equipment. May perform advanced maintenance activities, as qualified. This position is located at a facility that requires special access and subject to governmental inspections. Applicants must be U.S. Citizen. Responsibilities include, but not limited to: \n • Utilizing strong attention to detail and multi-tasking, responsible for quality control of product, which includes frequent in-process and final product quality testing. Respond to out of control points by either following established action plans for process disruptions or adjusting equipment as appropriate for equipment disruptions.\n, • Required to identify and complete preventive maintenance. Handle first-line troubleshooting such as equipment malfunctions, computer program issues, setting adjustments; involving appropriate other experts as needed.\n, • Various other tasks as assigned by supervision are required as a part of the daily routine to maintain safe operation and area standards (i.e. general housekeeping, etc.).\n, • Works with process / technical group on Management of Changes (MOCs) and projects as well as other work.\n, • Use computer programs SAP, MS Word, MS Excel, MS SharePoint, DuPont e-mail systems and others as deemed appropriate.\n\n Qualifications: \n • High School diploma\n, • Crafted journeyman and or associates in electrical, instrument, millwright, etc.\n, • Teamwork skills\n, • Troubleshooting skills; ability to think and act quickly\n, • Communication skills\n, • Willing and able to climb stairs, lift up to 50lbs, and work from heights\n, • Willing and able to work 12-hour rotating shift, including holidays with 7-day breaks.\n\n Qnity is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability or any other protected class. If you need a reasonable accommodation to search or apply for a position, please visit our Accessibility page for contact information.

Job Description Certarus is the North American leader in providing low carbon energy solutions through a fully integrated compressed natural gas (CNG), renewable natural gas (RNG), and hydrogen platform. The company safely delivers clean-burning fuels to remote communities and industrial customers not connected to a pipeline. By displacing more carbon-intensive fuels, Certarus is leading the energy transition and helping customers lower operating costs and improve environmental performance. With the largest fleet of specialty trailers in the world, the company is uniquely positioned to meet the growing demand for low and zero-emission fuel distribution. Summary: The Heavy Vehicle Mechanic will be responsible for maintenance and repair of our trucks and trailers. This position will report directly to the Regional Operations Manager The Mechanic’s responsibilities will also include keeping inventory, conduct diagnostic tests, assist technicians, as well as any other shop related tasks. Schedule: • Daily reporting to the Wallisville, TX Hub with service calls into the field via a company provided vehicle, • This position provides a set shift schedule that allows you to get home at the end of each shift, • A potential to travel outside of the assigned region is possible. Regional travel between Certarus hubs Duties & Responsibilities: • Diagnose problems with heavy duty vehicles and schedule repairs, • Perform minor and major repairs on trucks and trailers, • Perform regular diagnostic tests on trucks, • Commercial Vehicle Inspections as well as quarterly inspections, • Keep equipment available for use by completing preventive maintenance schedules, installing component and part upgrades, • Operate a pallet jack or forklift, • Maintain parts inventory, and company vehicle, • Perform other miscellaneous tasks as assigned by the Regional Manager or Supervisor Requirements: • The best suited candidate will have a minimum of 3-5 years of diesel mechanic experience with heavy vehicles, • ASE Diesel certification in both diesel engines and electrical systems, with T2 and T6 focus areas considered an asset, • Associates of Applied Science in Heavy Vehicle Maintenance is considered an asset, • Experience maintaining Cummins diesel, Peterbilt and Freightliner vehicles, • Ability to diagnose and repair engines, electrical systems, and brake components, • Excellent organizational and technical communication skills, interpersonal skills, and an ability to influence and to deal tactfully with a wide range of personalities, • Exceptional work ethic with a positive, analytical, and safe work attitude, • Basic skills in the use of computer-based programs such as MS 365, and CMMS systems, • Must be a safety minded, a self-starter, and a team player, • Clean Motor Vehicle Record(s) (MVR & PSP) with no suspensions, • Candidates must be able to pass a thorough criminal background check, Fit-for-Duty, and D&A screen to be considered for employment Certarus embraces diversity and equal opportunity in the way it impacts our continuous business success. As a Core Value of our Winning Team, we believe in surrounding ourselves with passionate and talented people, and consider all experiences, backgrounds, qualifications, and merits to create stronger teams with a diverse and inclusive culture. Certarus is and will remain an equal opportunity employer. Certarus offers a competitive compensation package, including benefits and retirement plans. Above all, we offer unlimited career advancement opportunities with a dynamic, rapidly growing organization. INDHP

Summary This position is primarily responsible for troubleshooting and repairing electrical circuits, power distribution, furnace instrumentation and controls mechanical and hydraulic equipment, machine tools, saws, forging and heat treat furnace equipment, closed die forging presses, manipulators & CNC machine mechanical issues with minimal supervision. In addition, this position is responsible for performing upgrade installation of new equipment as well as preventative and corrective maintenance to improve operational uptime and equipment life. The Maintenance Mechanic will perform a variety of maintenance, repair and continuous improvement functions on various plant equipment with limited direction and guidance. Support manufacturing operations in a spirit of teamwork and cooperation. Troubleshoot and resolve issues in a timely fashion. Safely, professionally and efficiently, complete machine repairs and rebuilds per line-up and documentation. We are an Equal Employment Opportunity employer. All qualified applicants will be considered for employment regardless of age, national origin, race, color, disability, religion, sex, sexual orientation, gender identity or expression, or any other characteristic protected under applicable law. Qualified candidates must have experience maintaining and troubleshooting heavy forging presses, manipulators, furnace combustion components, hydraulic and pneumatic systems and components like pumps, compressor, directional, servo and proportional valves, heat exchangers, filters and cooling tower equipment. Basic electrical knowledge for safe working with various industrial equipment is a must. Minimum Requirements and Qualifications Education and Experience • High School diploma or GED., • Electrician License and Hydraulic/Pneumatic / Millwright related certifications are desirable, • Education and/or Experience with an extensive background in electrical power distribution, forge equipment electrical and control troubleshooting and Forging Facility maintenance., • Experience in CNC Machine Repair is a plus., • Must have strong background in mechanical, electrical, hydraulic, pneumatics, CNC and overall machine troubleshooting skills., • Must have 5 years of experience as Maintenance Mechanic Skills and Abilities • Understanding of Safe working, • Ability to read Mechanical equipment drawings, hydraulic, electrical and pneumatic schematic., • Ability to plan and install conduit., • Allen Bradley PLC (SLC 500, Control Logix and RSView) Knowledge, • Fanuc Controls, Ladder Logic and Celos (Mori Seiki) program experience is a plus., • Ability to write routine reports and correspondence., • Ability to read service manuals to determine safe work procedures, • Ability to use CMMS/E-Maint System., • Knowledge of and experience with Microsoft Office., • Fit bearings, align gears and shafts, attach motors, and connect couplings and belts to precise tolerances., • Align and test equipment and make any necessary adjustments., • Perform predictive and operational procedures, • Repair or replace defective parts, • Service and repair hydraulic and pneumatic systems, • May do some minimum welding (a weld that is adequate in size to temporarily hold components in place until it can be completely welded by a registered apprentice welder or a journeyman welder) and fabrication., • Foresee and identify Critical spare needs and works with maintenance planner to ensure availability of parts in time., • Familiarity with government regulations for industry and safe work practices dealing with machine repair. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Troubleshoot and repair presses, manipulators, machine tools, saws and other plant equipment with minimal supervision using safe techniques and schematics. Perform minimum electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Troubleshoot and repair CNC machinery, presses and equipment with minimal supervision using safe techniques and schematics. Perform electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Operate in response to requests by maintenance supervisor or support personnel and set priorities as required to maximize equipment uptime, • Gather and maintain a complete set of required tools, including calipers, dial indicators, hydraulic and pneumatic testing equipment's, electrical meters and other diagnostic and measurement devices., • Utilize diagnostic tools and techniques to define problem areas and assist with resolution., • Utilize measurement devices to hold print tolerances and industry standards while performing machine repairs and assembly., • Participate in preventive and predictive maintenance programs to improve operational uptime and equipment life. Recommend improvements and/or changes to PM systems/tasks when applicable, • Follow designated work instructions as outlined for specific functions. These include, but are not limited to; PM work orders, continuous improvement tasks, new installation line-ups, and repair/refurbish assignments, • Update drawings/prints, suggest spare parts and suitable replacements, and perform various forms of machine repair/rebuild in a professional manner per line-up and schematics, • Follow standard practices and all governmental regulations and laws relating to powered equipment, • Perform other related duties as assigned by immediate supervisor and management, • Uses CMMS/EMaint /MS office system to document maintenance work including work orders/PM's and Inspections., • Prepare and verify Inventory report on periodical basis

Job DescriptionSalary: Blackstone Industrial provides innovative, high-quality, and sustainable solutions for critical rotating and static equipment. As one of North Americas leading technical service providers, we excel in field services, parts, repairs, and engineering. Trusted by industries such as heavy oil and refining, petrochemical, power generation, energy transmission, and agriculture, Blackstone is shaping the future of compressor maintenance and operation, striving to set new benchmarks. As we expand our operations globally, we are seeking a dynamic and motivated Tooling & Equipment Coordinator. Are you a detail-oriented professional with a passion for organization and efficiency? Join our dynamic team as a Tooling and Equipment Coordinator, where you'll play a vital role in keeping our Field Service team equipped and ready for action. In this position, youll take charge of managing tools, equipment, and vehicles, ensuring they are inventoried, and deployed seamlessly for on-site jobs. If youre looking to make an impact in a hands-on role that supports the smooth flow of operations, we want to hear from you! Key Tasks and Responsibilities Inventory and Tool Management: • Maintain accurate inventories of tools and equipment, ensuring availability for operational needs., • Assist in the procurement of new equipment and tools as required, including managing quotation processes., • Ensure tools required for industrial mechanic tasks are functional and ready for use., • Conduct regular calibration checks on tools to ensure accuracy and compliance with industry standards., • Assist in the maintenance of calibration records to ensure regulatory compliance and support audit processes., • Coordinate with external vendors or calibration facilities to maintain proper tool calibration and obtain necessary certifications., • Implement systems or procedures to track tool usage, repairs, and replacements to optimize efficiency and minimize downtime. Vehicle and Tooling Deployment: • Coordinate the deployment of vehicles and tooling units for on-site jobs, ensuring they are properly equipped with necessary supplies and meet safety regulations., • Prepare company vehicles for deployment to job sites by ensuring they are equipped with the required tools, office supplies, consumables, and other materials., • Ensure the timely delivery of vehicles and tooling units to job sites, making sure they arrive punctually and in proper condition., • Monitor job site schedules and ensure vehicles and tooling units are deployed and retrieved according to project timelines., • Conduct post-job inspections of vehicles and tooling units when they are returned, ensuring all tools and equipment are accounted for and in good condition., • Communicate effectively with project managers and team members to coordinate logistics for vehicle and tooling deployment and retrieval. Qualifications • Strong organizational skills and attention to detail., • Knowledge of industrial tools, equipment, and calibration processes., • Familiarity with inventory management systems and tracking tools., • Excellent communication and coordination abilities., • Experience with procurement, vendor management, or logistics in an industrial or mechanical environment is preferred., • Ability to lift and handle heavy equipment as required., • Comfortable working in a shop environment and occasionally on-site.

Job Description Join the Team That Builds Big! Primoris Heavy Civil is immediately hiring skilled Road Carpenters and Structural Form Builders in the Houston, TX area. If you’ve got experience in building and installing form structures using wood, system forms, or both, we want to hear from you! You’ll be part of major infrastructure projects that shape the future of our communities. Build your future with Primoris — Apply Today! JOB DESCRIPTION The Carpenter is responsible for constructing, installing, fabricating, dismantling, and repairing structures, formwork, fixtures, and related components using wood, metal forms, and associated accessories. GENERAL REQUIREMENTS • Practice safety rules., • Follow verbal and written instructions., • Safe use of hand & power tools., • Report to and assist immediate supervisor., • Perform quality work as determined by project specifications., • Accountable for all tools and materials at the end of your shift., • Must work well as part of a team. FUNCTIONAL REQUIREMENTS • Read blueprints and schematic drawings to determine work procedures., • Select the type and size of related materials according to the job specifications., • Study blueprints, sketches, or building plans for information on the type of material required, such as lumber or fiberboard, and the dimensions of the structure or fixture to be fabricated., • Select specified types of lumber or other materials., • Prepare layouts, including lines and grades., • Marks cutting and assembly lines on materials., • Shapes materials to prescribed measurements., • Constructs forms and chutes for pouring concrete., • Assembles cut and shaped materials and fastens them together., • Fabricate from work, then load, haul, and carry it to the job site and install according to drawings, sketches, or plans., • Place and finish concrete in formwork and set and align form panels., • Set grout forms for epoxy and cement grout. QUALIFICATION STANDARDS • One (1) to four (4) years of experience in a specified skill (depending on mechanic level)., • Written pre-employment qualification test., • Post-offer drug/alcohol screen and physical evaluation., • New Hire Orientation Quiz, • Applicant/employee must not pose a direct threat to the health or safety of such individual or others in the workplace., • Job site safety requirements as required by the client (e.g., long sleeves, steel-toe boots)., • Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.). PHYSICAL REQUIREMENTS • Must comply with the company’s drug and alcohol abuse policy., • Must be able to pass a physical examination, pre-employment if necessary, and as required by the company., • Able to climb and maintain balance on ladders, scaffolding, stairways, etc., • Stoop, kneel, crouch, crawl, or work at elevated heights and in confined spaces (towers, vessels, excavations, etc.)., • Able to carry 50 lbs. of tools and/or materials. It is recommended that assistance be given to lift items over 50 lbs. Check with your project supervisor or project safety director., • Must be able to stand or walk for long periods of time., • Must be able to work extended hours on your feet on uneven surfaces (dirt, concrete, asphalt, mud, gravel, etc.) WORK ENVIROMENT • Location: industrial construction sites and/or fabrication shop, • Mobility Barriers to Access Job Site:, • Uneven ground level, • Obstructed pathways, • Work performed at low and/or high elevations, • Work performed in confined areas, • Climatic/Environmental Conditions at Job Site:, • Predominately outdoor climate, • May be exposed to extreme hot or cold weather, • Excessive humidity, rain, etc., • Various noise levels caused by tools, machinery, equipment, etc., • Potential exposure to chemical substances BENEFITS • Competitive compensation paid weekly, • Best-in-class; Medical, Dental, Vision, and LTD/STD, • 401(k) with company match, vested day-one, • Employee Stock Purchase Plan [ESPP], • Tuition Reimbursement, • Pet Coverage "For our Furry Friends", • Legal Assistance Coverage, • Award winning safety programs COMPANY OVERVIEW Primoris was formed in 2004 as the parent company and is traded on the NYSE under the symbol PRIM. We provide a wide range of construction, maintenance, and engineering services for power generation, oil and gas, chemical, pipeline, utilities and distribution, and civil infrastructure clients. Primoris is ranked in the top 1% of the prestigious Top 600 Specialty Contractors List by Engineering News-Record (ENR), having built projects throughout the U.S. and Canada. For additional information, please visit www.prim.com. Primoris Heavy Civil, supported by the bonding capacity and resources of Primoris, has expanded into an even larger role within the heavy civil, infrastructure rehabilitation and transportation industries. Heavy Civil provides highway, port, airfield, rail and marine (intermodal transportation) construction services to private commercial and industrial clients as well as governmental entities such as the Department of Transportation and the US Army Corps of Engineers. Heavy Civil is comprised of six operating units that include North Louisiana Operations, South Louisiana Operations, Texas Operations, HMA Paving Operations, Concrete Paving Operations, and the Infrastructure Rehabilitation Unit. AGENCY STATEMENT We are not accepting resumes from Third Party Recruiting Firms for this position. If you are an Agency or Search firm representative, contact the Primoris Talent Acquisition Manager directly for consideration. Primoris or its subsidiaries will not be responsible for any fees arising from the use of resumes and online response forms through this source. In addition, Primoris or its subsidiaries will not be responsible for any fees on unsolicited resumes that are submitted to any member of the Staffing or Operations team. Primoris has established an approved vendor program for this service and will only consider accepting submissions from those approved firms. For consideration in becoming an approved vendor, contact HR. #LI-IG1

Job Description Do you have the need for speed? Do you thrive in a fast paced, energetic work environment that focuses on serving our customers? If so, K1 Speed is the place for you. As the nation’s indoor electric karting leader and innovator for over the past decade, K1 Speed does not compromise on the quality and value of the product we offer. Through our industrial go-karts and excellent staff, our passion is to show the world how fun karting can actually be. As a Head Mechanic, you will service and maintain our fleet of state-of-the-art, high performance, high speed electric go karts. Duties and Responsibilities • Perform opening track and kart repairs and performance checks, • Maintain kart performance throughout the day, • Maintain track and facility appearance and functionality, • Keep accurate documentation of repairs, parts inventory, and special projects, • Responsibly maintain supply of tools and machinery, • Respond to emergency situations as they arise, • Ensure that the pit, kart shop and track areas remain clean and safe, • Assist the track crew with track operations in limited situations, • Perform specific facility cleaning and maintenance duties as assigned by management, • Perform closing duties to secure the pit and track and prepare for the following day's operation, • Ability to define problems, collect data, establish facts, and draw valid conclusions. Job Requirements • Must be at least 18 years of age, • High school diploma or general education degree (GED); or 1 to 3 months related experience and/or training; or equivalent combination of education and experience., • Provide proof of identity and eligibility to work in the United States, • Weekends are a must!

Industrial Maintenance Mechanic: Northwest Houston.JOB SUMMARY: Industrial Maintenance Mechanic - $28.Responsible for: mechanical maintenance for metal working machines, such lathes, presses, saws, honing machines, boring machines & over-head cranes.Some welding experience needed.MAIN DUTIES &am

Job Description Maintenance Technician/Mechanic Ingenia Polymers is a world-class, fast-growing, global company looking for people that have the passion to lead, the desire to grow, and the ability to create and deliver solutions for our customers. We offer an environment that is innovative, diverse, intellectually stimulating, and unique. We are searching for exceptional, detailed oriented with strong analytical and interpersonal skills to perform the role of Mechanic/Maintenance Technician, at our Houston or La Porte, Texas US manufacturing facility.  Must be able to work in hot and cold environments for extended periods of time.  Must be able to work from multiple body positions: (kneeling, stooping, bending over, overhead work, working off a ladder, climbing a ladder, lying underneath equipment).  Must be able to bend and lift 50lb and 75lb.  Must have at least 2 years prior maintenance experience as a maintenance industrial maintenance mechanic/industrial maintenance technician.  All maintenance positions here at Ingenia are multi-craft. Meaning a person applying for any maintenance positions with Ingeina and has a heavy mechanical background must be willing to learn and or perform light to medium duty non-energized electrical work as needed. A person with a heavy industrial electrician background must be willing to learn and or perform light to medium duty mechanical work as needed. Absolutely no one will ever be put in an unsafe situation or a situation that they are not comfortable with due to lack of experience.  All applicants must have and maintain a positive attitude, strong work ethic, must be open minded, must be able to work in a fast paced environment, must show the initiative learn the plant’s equipment and process to improve themselves as an Ingenia maintenance mechanic/technician, be willing to learn and or work as a multi-craft maintenance mechanic/technician, must be willing to assist other maintenance mechanics/technicians as needed, work with contractors as needed, perform miscellaneous tasks around the plant facilities as needed, must be able to work 1st, 2nd and 3rd rotating shifts depending on plant needs, be able to work weekends on a rotating shift and be available to respond to callouts for on call weekend coverage that is also a rotating shift.  NCCER certificate as a millwright, NCCER certificate as an industrial electrician or Texas electrical journeyman license is preferred but not required. Additional experience in welding or machining on top of their mechanical or electrical background is a plus.  Applicants with maintenance experience in the plastics industries and or twin screw extrusion is a plus.  Applicants with SAP experience in creating work orders, parts management and timecard entries is a plus.  Applicants with millwright or mechanical backgrounds must have knowledge of using hand tools, power tools, pneumatic tools, calipers, filler dial indicators, plumb bob, squares, levels, protractor, center punch, pry bars, various types of wrenches, pullers. Perform preventive maintenance per schedule. Must have knowledge of removing, rebuilding, installing, maintaining and performing alignments on electric motors, compressors, gearboxes, gear/motors, centrifugal pumps, gear pumps, couplings, sheaves, sprockets, and drive belts, various sizes of roller chain, ball bearings, roller bearings, various types of seals, and various types of gaskets, able to bolt up various sizes of flanges properly. Knowledge of disassembly and reassembly of extruder barrel sections, screw shafts, screw elements is a plus. Must be able to cut, thread and install screw pipe properly. Must be able to locate equipment literature when needed. Must be able to read, interpret and work from equipment, structural and hydraulic drawings. Must be able to document all tasks, fill out and turn in jobs sheets after each job, check and send communication emails, enter documentation on work orders and enter time cards. Knowledge of SAP is a plus. Any additional hydraulic, electrical, welding or machining knowledge/experience is a plus.  Applicants with electrical backgrounds must have knowledge of using hand tools, power tools, knock out set, tubing benders, conduit benders, crimping tools, amp meters, voltage meters, megohmeter, ECT. Must have knowledge of installing, troubleshooting and maintaining motors, motor controls, motor starters, AC and DC control systems, solenoid valves, relays, 120VAC, 277VAC and 460VAC lighting fixtures and lighting circuits. Perform preventive maintenance per schedule. Must have knowledge removing, installing, and wiring single phase and three phase 120VAC, 230VAC, 460VAC, 575VAC, 4160VAC and 700VDC electric motors. Must be able to read, interpret and work from equipment and electrical drawings and schematics. Knowledge of troubleshooting, installing and programming drives/VFD’s and soft starters. Must be able to install rigid, EMT and PVC conduit per NEC code. Must be able to scope small projects with little or no assistance. Must be able to install wiring and properly size cable/wiring as well as properly size raceways/conduit and conduit body fill percentages per NEC code. Knowledge of single phase and three phase electric heaters. Knowledge of various types of instrumentation (pressure, temperature, speed sensors, level sensors, load cells, load cell summing boards, load cell transmitters). Must be able to document all tasks, fill out and turn in jobs sheets after each job, check and send communication emails, enter documentation on work orders and enter time cards. Knowledge of SAP is a plus. Any additional mechanical, hydraulic, welding or machining knowledge/experience is a plus.

Job DescriptionDescription: Do you want to join a growing company with comprehensive competitive benefits plans? Then, LT Foods Americas is the place to be. Join our Team now! We are located in Missouri City, TX. We're looking for an experienced Maintenance Mechanic Technician to support our Team! We offer competitive pay, benefits, vacation time, and more! The Maintenance Mechanic Technician will ensure the work areas and equipment are in a clean, safe, and efficient operating condition and is responsible for the safe maintenance, repair, or replacement of equipment and systems to ensure maximum production efficiency while supporting the policies, goals, and objectives of the Company. Additionally, this position requires the individual to understand, troubleshoot, and repair electrical and operational equipment. This position takes direction from the Maintenance Team Lead. Key Responsibilities: -Troubleshoot, repair, and maintain plant equipment both mechanically and electrically. -Perform preventative maintenance on all equipment. -Makes recommendations for improvement and solving maintenance-related problems. -Communicate parts inventory tracking based on usage to Management. -Ability to follow company GMPs (Good Manufacturing Practices) and Food Safety practices -Monitor machinery to minimize unplanned downtime, anticipate and solve problems promptly, and identify opportunities for improvement. -Responsible for all necessary reporting and required paperwork. -Facilitate open communication between the maintenance department and other departments to ensure timely handling of all equipment problems and food safety issues. -Perform other duties as may be required and/or assigned. -Ordering and installing parts. What we offer: -Flexible Schedule -Quarterly Bonus -Matching 401k Plan -Employee Sponsored Benefits (Medical, Dental, Vision, Life, FSA) after 30 days. -Paid time off after 30 days (up to 26 days off annually!) -Employee discount on the company's product Requirements: Minimum Requirements: • Experience in a related technical field or certificate or diploma from trade school in a related field, or three years of experience in the maintenance of industrial/food manufacturing equipment, or equivalent combination of education and experience., • Computer/Software Skills– SAP, Excel, Outlook, Microsoft Word, PowerPoint, • Ability to troubleshoot and repair electrical/mechanical systems., • Possesses basic electrical skills, • Familiarity with Food Manufacturing equipment, • Solid work history and willingness to function in a team environment successfully. Must be able to communicate with various levels of personnel effectively, • Desired Qualifications:, • Manufacturing experience is ideal, as the incumbent will be troubleshooting manufacturing equipment (Toyo machine, retort, robotics, conveyors) and more, • Physical Demands:, • Standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day., • Must frequently lift and/or move items over 50 lbs. assisted. Physical Demands: • Standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day., • Must frequently lift and/or move items over 50 lbs. assisted.

Job Description Facilities Mechanical/Industrial Lead Houston, TX Company Overview: Intuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. Our mission is to further science and exploration, communications, and economic progress from the Earth to the Moon and beyond. With the first commercial lunar landing in history, multiple NASA lunar missions in development, and additional private missions on our manifest, we pride ourselves in supporting our customers and the nation in paving the way to return humans to the surface of the Moon. Our world-class team includes experts in all aspects of spacecraft subsystems design, development, and test, on-orbit operations, and safety. Position Overview: We are seeking a proactive and hands-on Facilities Mechanical / Industrial Lead to support the operation, maintenance, and continuous improvement of facility and manufacturing systems within a fast-paced environment. This role is responsible for supporting day-to-day facilities operations, industrial mechanical systems, equipment reliability, and production support activities while helping drive operational efficiency, safety, and process improvements across the organization. The ideal candidate will possess strong mechanical troubleshooting and problem-solving abilities, along with experience supporting manufacturing operations, facility infrastructure, equipment maintenance, workflow optimization, and continuous improvement initiatives. This position will also assist with equipment layout planning, process documentation, efficiency studies, and operational projects aimed at improving safety, quality, productivity, and cost performance. Successful candidates will demonstrate the ability to quickly resolve operational and mechanical issues, effectively prioritize work in a dynamic environment, and collaborate across multiple teams to support facility and production objectives. Responsibilities: • Monitor and maintain facility maintenance support equipment and industrial mechanical systems., • Monitor facilities to ensure a safe, clean, efficiently operating, and productive work environment., • Assist Facilities Management with schedules and organizing any service work performed by technicians, vendors, and contractors to repairs, cleaning, and security operations., • Perform maintenance repairs for basic plumbing, minor electrical, carpentry, HVAC systems, roofing, general landscaping, and other building support systems., • Conduct regular building rounds and submit reports to Facilities Management to ensure assigned areas are clean and safe, and that maintenance crews are keeping systems and equipment in proper working order., • Respond to internal customer inquiries and complaints. Ensure timely repairs with quality service, then follow up to confirm customer satisfaction., • Support manufacturing and project activities by troubleshooting mechanical, process, and facility-related issues., • Assist with plant layout, workstation setup, equipment placement, and material flow improvements to improve safety, productivity, and efficiency., • Support time studies, workflow analysis, and process improvement initiatives to identify bottlenecks, reduce waste, and improve labor and equipment utilization., • Assist in developing and maintaining standard work instructions, process documentation, preventive maintenance procedures, and training materials., • Collect, analyze, and report data related to downtime, equipment performance, maintenance issues, production flow, space utilization, and process efficiency., • Participate in continuous improvement projects, including Lean manufacturing, 5S, Kaizen, root cause analysis, and corrective action activities., • Work with production, engineering, maintenance, quality, and facilities teams to improve processes, reduce recurring problems, and support operational goals., • Recommend improvements to tools, equipment, layouts, maintenance practices, and work processes to improve safety, quality, cost, and delivery performance., • Assist with project planning, implementation, and follow-up for facility upgrades, equipment moves, process changes, and manufacturing support projects., • Ensure work areas, tools, equipment, and facility systems comply with company safety standards, housekeeping expectations, and applicable regulations. Requirements: • Bachelor’s or associate degree preferred, in Engineering, Industrial Technology, Mechanical Technology, Industrial Engineering Technology, Facilities Maintenance, Manufacturing Technology, or a related field., • Preferred experience as a maintenance mechanic, facilities technician, industrial technician, or manufacturing support technician., • Experience in a manufacturing, industrial, warehouse, or production environment required., • Plumbing knowledge to assist in installation, address leaks, and perform basic repairs., • Carpentry ability to handle basic repairs around the building., • Basic knowledge of electrical, HVAC, mechanical, pneumatic, hydraulic, and facility systems preferred., • Familiarity with commercial and industrial mechanical systems., • Understanding of manufacturing processes, production flow, equipment layout, and material handling concepts., • Experience with Lean manufacturing, 5S, continuous improvement, root cause analysis, or process improvement preferred., • Ability to assist with time studies, workflow analysis, process documentation, and efficiency improvement projects., • Ability to read and interpret basic engineering drawings, layouts, manuals, work instructions, and equipment documentation., • Interpersonal skills to interact with employees, vendors, contractors, and visitors in a professional and pleasant manner., • Strong attention to detail to ensure all jobs are completed properly and that potential hazards, inefficiencies, or warning signs of problems are not overlooked., • Ability to perform a variety of services, maintenance, manufacturing support, and process improvement tasks each day., • Ability to interact effectively as a leader or team member and work collaboratively with other departments., • Mechanics, maintenance, HVAC, electrical, industrial technology, or related certifications a plus., • Excellent problem-solving and troubleshooting skills., • Ability to collect data, identify trends, and recommend practical improvements., • Ability to stand for extended periods, walking, climbing, bending, reaching, and lifting or moving materials or equipment., • Ability to lift and carry items of various weights, with or without reasonable accommodation., • Excellent verbal and written communication skills. US EEO Statement Intuitive Machines is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance, • Competitive salary, • Opportunity for advancement We are seeking a reliable and experienced Maintenance Technician Industrial Mechanic to support our cosmetic contract manufacturing operations. In this role, you will be responsible for maintaining, troubleshooting, and repairing a wide range of production and packaging equipment used in the formulation and filling of cosmetic products. Your work will directly impact our ability to deliver high-quality products on time and ensure compliance with GMP and safety standards. Key Responsibilities: • Perform routine and preventative maintenance on mixers, filling machines, labelers, conveyors, cappers, and other cosmetic production and packaging equipment., • Troubleshoot mechanical failures and perform corrective actions to minimize downtime., • Assist with equipment setups and changeovers for different product runs., • Install, align, and calibrate new equipment and production lines according to specifications., • Maintain documentation of maintenance activities, parts usage, and repairs in accordance with GMP and internal SOPs., • Collaborate with the production and quality teams to ensure equipment is operating efficiently and safely., • Follow all safety procedures and company policies, including lockout/tagout (LOTO), PPE use, and chemical handling., • Support continuous improvement initiatives related to equipment reliability and efficiency., • Participate in audits, inspections, and equipment validation as required. Qualifications: • High school diploma or GED required; technical certification in industrial mechanics, mechatronics, or a related field is preferred., • 3+ years of hands-on experience in industrial or mechanical maintenance, preferably in cosmetic, pharmaceutical, or food & beverage manufacturing., • Strong mechanical aptitude and working knowledge of pumps, gearboxes, drives, pneumatic systems, and filling/packaging lines., • Familiarity with Good Manufacturing Practices (GMP) and Cleanroom requirements., • Basic understanding of electrical systems and PLC-controlled equipment., • Ability to read mechanical drawings and schematics., • Comfortable working in a fast-paced, regulated production environment., • Ability to lift up to 50 lbs, stand for extended periods, and work flexible shifts including nights or weekends if required. Equal Opportunity Employer We are committed to providing equal employment opportunities to all applicants and employees. Employment decisions are based on qualifications, merit, and business needs, without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, veteran status, or any other characteristic protected by law.

Job DescriptionDescription: About the job Are you looking for a career path that challenges you to unleash your full potential? Look no further than Willbanks, the #1 Boiler Service company in Texas. Our family-owned business values diversity, inclusion, and innovation that creates a work environment promoting forward-thinking and creativity. Our people are what make us great and sets us apart from our competition. Benefits: • Training, • Comprehensive tool packages, • Competitive compensation packages, • 401k plans We also value work-life balance and offer: • Internal functions to get to know your coworkers on a fun level, • Holistic health coverage, • 10 paid holidays, • 120 Hours of PTO, • Memberships to professional organizations paid for by the company MISSON OF THE POSITION: The Boiler Mechanic’s primary function is to install, maintain, repair, and modify, piping and complex heating and steam boiler systems, in multiple types of commercial and industrial applications. This is a hands-on, labor intensive job where a variety of hand or power tools, and welding equipment will be used. Once the boiler is in working order, the mechanic will complete and record their services through various paperwork. ROLES & RESPONSIBILITIES • Plans and lays out work from blueprints, sketches, drawings, specifications, guides, codes, and work orders., • Troubleshoots heating boilers, heating systems, and fuel power boilers with complex problems and extensive repairs, requiring judgment to locate malfunctions., • Communicate any order updates, changes, or issues with clients, Project Managers, and dispatchers., • Installs, modifies, overhauls, repairs, and maintains a variety of complex heating boilers and/or heating systems, single and multiple fuel power boilers, and associated auxiliary control equipment., • Performs preventive maintenance on heating, domestic, steam and hot oil boilers and auxiliary equipment., • Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment., • Regularly runs piping in welded, threaded and ProPress pipe., • Reads blueprints, schematics, piping diagrams, and drawings of hydronic and domestic hot water systems, steam systems and hot oil systems for proper installation., • Uses and maintains a variety tools and equipment., • 10. Perform other duties as assigned. Requirements: EDUCATION • High school diploma or GED required., • Associates degree in related field, experience in related field in lieu of degree may be considered, preferred. CERTIFICATIONS & LICENSES • OSHA 10 Safety Training preferred., • Annual Basic Plus Safety, • National Board of Boiler and Pressure Vessel Inspectors (NBBPVI) Certification preferred., • American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code Certification preferred., • Environmental Protection Agency (EPA) Section 608 Certification preferred. EXPERIENCE • Three (3) to five (5) years of experience as a boiler mechanic required., • NBIC or ASME pressure vessel welding experience preferred., • Scotch Marine Boiler Service or Pressure Vessel welding preferred., • Siemens, Allen-Bradley, and other PLC and Discreet Digital Controls preferred., • Vertical uphill and vertical downhill with a 6G qualifier preferred. TALENTS • Integrity, • Self-Discipline, • Reliability OUR CORE VALUES Think Forward • What got us here, won’t get us there., • Challenge the status quo., • Anticipate. Lift up • Encourage., • Educate and elevate., • Extend a helping hand. Do Right • Do what you say., • No Bullshit. Be Great • Good is the enemy., • Be the exception., • Rise above., • Go beyond. Bring Passion • Love what you do., • Motivate., • Inspire., • Have fun. Improve Today • Be better., • Make the world better.

Job Description Branch Location: IMSCO Technical – Industrial Mechanical Services Company. For over 75 years, Purvis Industries has been proud to be a family-owned and operated industrial distributor that does business the old-fashioned way: sell quality, top-tier manufacturers, know the products and the application challenges the products solve, and have the product available on the local branches' shelf. Today, the company has 101 locations in 17 states and is one of the most significant independent bearing and power transmission distributors in the country. As we grow and continue to expand, our customers find that we stay true to what George Purvis told us more than 75 years ago: if you sell the best products, know the products and how to apply them and keep those products on your shelf so you can take care of your customer, you will be successful. Let Purvis Industries show you how we practice these principles daily! The Lead Industrial Mechanic will be responsible for allocating manpower and equipment, to ensure completion of each project within the defined scope and in the time parameters allowed, without compromising the Safety of our Team Members or the Quality of the Work provided. The following is a list of job duties for a Lead Industrial Mechanic. These responsibilities and physical requirements include, but are not limited to, the following: Responsibilities: • Will report to Project Manager for Job assignments., • Will complete all Pre and Post Job Paperwork., • Will communicate with Project Manager, Sales Team, and Customer., • Will communicate effectively In Person, by Telephone or by Computer., • Will be responsible for Workplace Safety, Safety Training, and Implementation., • Will be able to read Blueprints., • Will be required to Travel. Core Requirements: • Industrial Mechanic, Millwright, Welder Fabricator with 5 years of experience in Industrial setting, • Proficient with all types of Hand Tools, Power Tools, Measuring Tools used in Industrial Maintenance, Building Erection and Equipment Installation., • Able to align, assemble, and disassemble, machinery, troubleshoot mechanical issues, perform routine maintenance., • Proficient at Welding and Metal Fabrication in Industrial Setting. (Certifications a plus), • Able to adapt quickly, allocate manpower and resources on jobsite to complete project in safe and timely manner., • Physical ability to perform tasks that may require prolonged standing, sitting, and other activities necessary to perform job duties., • Employee must be able to lift products to 70lbs daily., • Must have Valid Driver’s License., • Must be able to pass Drug test., • Must be able to pass a background check., • Legally Authorized to work in the US. Benefits • Paid time off, • 401(k) enrollment, • Health insurance, • Dental Insurance, • Vision insurance, • Life Insurance, • Ability to set up a Flexible Spending Account You will be a valued member of a stable and established company. We are committed to our employee’s professional development and will provide you with ongoing training and opportunities for advancement. Purvis Industries, an Equal Opportunity Employer, promotes a drug-free workplace.

Job Description Vanderlande Logistics seeks experienced mechanical and electrical controls technicians in support of the team located at the Houston, Texas International Airport location for Maintenance Mechanic Level II opportunities. This position requires experience and knowledge in the responsibilities as outlined. Responsibilities: • Performing maintenance, repair, troubleshooting, and testing of the Baggage Handling Systems and their associated components and providing accurate and timely written reports of safety, operational, and maintenance activities., • Must have the ability to interpret data and suggest maintenance schedule/activity adjustments to the Manager., • Update daily, weekly, and monthly maintenance activity schedules. Physical requirements include, but are not limited to: Lifting (50 to 100 pounds), bending, reaching, climbing, walking, crawling, standing, sitting, climbing stairs, speaking, sight, and/or hearing to complete the job duties. Required Skills / Education: • Preferred Experience: 2-5 years of experience., • Education Required: HS Diploma or GED required., • Electro-Electronics / Mechanical skills required., • Excellent Customer Relations skills., • Adhere to all safety regulations and safe work practices., • Mechanical troubleshooting skills include but are not limited to belts, bearings, pulleys, drives, and gearmotors., • Industrial electrical troubleshooting skills, • Maintenance management software skills, • Tracking inventory., • Ability to pass all background checks and security screenings per airport requirements., • Qualified Applicants must be legally authorized for employment in the United States. Why Join Vanderlande? • Benefits start on day one. Details regarding our benefits can be found here upon hire: https://workforcenow.adp.com/, • The starting pay rate for this position is $22.00. The actual wage offered may be lower or higher depending on budget and candidate experience, knowledge, skills, qualifications and premium geographic location., • $1,000 sign on bonus, • We value our employees and create an environment for career growth, • Equal opportunity workplace that embraces and promotes ownership culture, empowerment, open communication, diversity, and collaboration, • Professional development and tuition reimbursement, • Matching 401(k), • 18 days of paid PTO

Job DescriptionIndustrial Equipment & Forklift MechanicHouston, TX 77015 $19.00 – $20.00 per hour (DOE) Full-Time | Overtime Available | Long-Term Opportunity Looking for a Skilled Mechanic Ready for Steady Work & Overtime? We are hiring an experienced Industrial Equipment & Diesel Forklift Mechanic to join a fast-paced manufacturing facility in East Houston. This is a great opportunity for someone who enjoys hands-on mechanical work, troubleshooting heavy equipment, and working in an industrial environment where no two days are the same. If you have experience with diesel forklifts, hydraulics, industrial machinery, welding, or electrical troubleshooting, this could be the perfect long-term opportunity for you. What You’ll Work On • Diesel forklifts, • Hydraulic systems, • Industrial press machines up to 6,000 tons, • Mechanical and electrical troubleshooting, • Welding and fabrication support, • Preventive maintenance and repairsJob Responsibilities, • Diagnose and repair diesel forklifts and industrial equipment, • Troubleshoot hydraulic, mechanical, and electrical issues, • Perform preventive maintenance on heavy industrial machinery, • Assist with repairs on large industrial press machines, • Work with electrical systems ranging from 110V–660V, • Support welding and fabrication projects when needed, • Maintain a safe and organized work environment, • Follow all company safety procedures and maintenance protocolsRequirements Minimum 1–3 years of industrial maintenance or mechanic experience Experience repairing forklifts (diesel preferred) Strong knowledge of hydraulic, mechanical, and electrical systems Welding or fabrication experience is a plus Must have own mechanic tools MUST be bilingual – English & Spanish Able to work in a non-climate-controlled industrial shop Dependable, motivated, and able to work independently Must be flexible for overtime and weekend work ScheduleMonday – Friday 6:00 AM – 5:00 PM Saturday 6:00 AM – 2:00 PM Overtime required Occasional Sundays may be required Why Apply? Steady full-time hours Consistent overtime available weekly Long-term stable opportunity Hands-on industrial work environment Opportunity to expand mechanical and troubleshooting skills Fast hiring process

Location(s): Houston, TX, US, 77029 Function: Manufacturing Audience: Hourly Work Arrangement: On Site Requisition ID: 68731 Maintenance Mechanic 2nd Class Job Description Job Title:Maintenance Mechanic 2nd - Class Department:Maintenance Reports to:Maintenance Leader Pay: $35.34 Supervises:N/A FLSA Status:Non-Exempt Date:9/18/23 SUMMARY The purpose of the2nd class mechanicisto perform as professional, highly skilled and exceptionally competent maintenance person. Participates in teams to develop and implement solutions. JOB DUTIES AND RESPONSIBILITIES PRINCIPAL DUTIES AND RESPONSIBILITIES: Plant and Environmental Safety • _Lives the Owens Corning Safety Stand and meets all safety requirements. Safety is a condition of employment., • Take personal ownership to work safely and hold other team members to the same high standards of safety, • Notify supervisor immediately of any accident, near miss or on- the -job injury when it occurs no matter how insignificant it may seem., • Participates in the safety, quality, autonomous maintenance, TPM and housekeeping programs as established within the plant; including but not limited to Focused Improvement Events, Safety Committee, Training, etc., • Performs job tasks to reduce environmental impact and adheres to the environmental regulations and recycling procedures for waste disposal., • Complies with all plant rules and safety regulations., • Performs cleanup duties at workstations and/or equipment/machinery., • Communicates safety concerns and/or equipment problems/abnormalities to appropriate personnel, maintaining strong communication with the appropriate line section operators to ensure immediate action is taken for product out of spec., • Inspect vehicles before use and throughout shift, keeping all equipment clean and operational. TPM • Participates in plant TPM initiatives - completing activities associated with TPM tasks (adheres to CILT standard, 5S)., • Continues to use TPM methodology to gain a better understanding of the equipment., • Identifies and participates proactively in learning opportunities and develops expertise in those areas., • Utilizes Focus Improvement tools to problem solve., • Works to achieve zero injuries, zero defects and zero losses., • During PM days, uses time effectively to bring equipment to optimal condition for zero losses., • Maintain DM and Step Boards. Maintenance • Energy Control Procedures (ECP's) and Lock Tag Try (LTT) system. Respect for the potential hazards within the manufacturing operation. Training and regular auditing of the process., • Fluent in the language of the plant., • Computer literacy - email, simple spreadsheet, word doc., • Safe rigging procedures., • Forklift operation, licensed - will provide certification., • PLCintermediate -- Ability to use laptop for troubleshooting and see what limit switch or photo eye isn't working and ability to adjust where needed. Internal various timers in the program; the ability to access status files to diagnose and clear PLC faults., • Intermediate troubleshooting, how to analyze a problem and step to the root cause. Help reduce cycle time to problem resolution and eliminates the "replace and see what happens method" with little to no direction., • Understand what it takes to consistently manufacture our products. Critical product characteristics, key process variables, customer needs etc., • Business 101 - World Class Manufacturing (WCM) concepts, what are they, individual and business benefits. Key business metrics and focus., • Installs, modifies or maintains plant equipment and assists in determining appropriate methods to accomplish these tasks., • Must work safely and follow all documented and "common sense" safety policies and procedures., • Read, understand, and analyze blueprints and other technical data references., • Expert use of hand and power tools., • Inspects plant equipment to identify potential problems prior to breakdown occurrences., • Complies with good housekeeping practices on the job and insures work areas are clean and picked up after each job completion., • Follows all environmental compliance polices & programs., • Work as instructed with outside contractors. Mechanical • Basic understanding of machining bores, keyways, drill press, grinding; lathe and mill operation., • Ability to properly precision align belt, gear or direct coupled shafts using proper tools to specified tolerances., • Understanding of lubrication principles and bearing tolerances and bearing physics-I.E. how does it work in terms of need for extreme care, keeping clean, etc., • Hydraulic systems understanding - hydraulic flow principles. Effects of pipe sizes and valves on pressure drops, making proper fittings per system requirements, proper valve application, etc. Applied to water systems, hot oil, and hydraulic systems., • Same as above for compressed air and steam, (where applicable) systems., • Understanding of pump and operating characteristics including effects of suction pressures, head pressures, sealing/packing techniques., • Ability to track conveyor belts properly and understanding the physics of belt operation and tracking including bucket elevators; belt splicing., • Ability to read air and power fluid schematics., • Welding for all; structural and piping welding for at least one craft per plant., • Pipefitting - alignment, flange, threading., • Electrical component "how they work" understanding: solenoids, motors, heaters, contacts, and photoeyes., • Ultrasonic rotating equipment troubleshooting. Electrical • Industrial electrical code., • Capability to read schematics and P&ID drawings., • Fusing, thermal overload protection, wire sizing, motor theory, etc., • AC/DC and Servo drive system., • Be able to safely conduct motor control and power circuit troubleshooting. Understand fuse sizing, take motor amp readings, understand basic DC motor control, etc., • Ability to fully troubleshoot AC/DC variable frequency drives, and communicate technically with outside technical support when needed., • Ability to fully understand the various control loops in the plant including IM/APC systems and weight control equipment., • Competent in electrical noise avoidance-grounding, shielding, etc., • Burner system understanding, troubleshooting and properly tuning Other • _Demonstrate the ability to effectively communicate., • Support the training and development of colleagues., • Demonstrates flexibility to changing priorities as business needs dictate., • Identifies and participates proactively in learning opportunities, and develops expertise in those areas., • Follows standard operating procedures and processes., • Can and is willing to make decisions. Knows the chain of command to get support., • Regular attendance on site and the ability to rotate varying shifts., • All other duties as assigned or needed. _JOB REQUIREMENTS SKILLS AND ABILITIES The employee should hold the following skills and abilities: • _Demonstrated desire to impact safety, • Must be able to work independently or in a team atmosphere with minimal direct supervision, • Demonstrated mechanical aptitude and the ability to troubleshoot, • High attention to detail, • Demonstrated ability to multi-task, • Basic mathematics skills, • Able to effectively communicate (read, write, speak, understand) English, • Electrical, • PLC, • Hydraulic, • Pneumatics, • Blueprint & Schematic reading, • Proficient in SAP PM Module _COMPUTER AND SOFTWARE COMPENTENCIES The employee must be able to: • Work with a computer to perform basic data entry, • Demonstrate basic computer skills such as_Microsoft Outlook, IVC and SAP. EDUCATION AND/OR EXPERIENCE • High School Diploma or GED Equivalent required., • Manufacturing or process related experience preferred., • Preferably five (5) years in a related maintenance trade or occupation that involved electrical, hydraulic machinery and equipment in a manufacturing environment., • Able to demonstrate trouble-shooting techniques and have a basic understanding of blueprints., • Basic ability and knowledge of welding practices and hydraulic circuitry., • Advanced understanding of electrical circuitry., • Basic PLC knowledge., • Must have the ability to interpret instructions furnished in written, oral, diagram or schedule form., • Flair for working with large industrial machines., • Must be able to work independently or in a team atmosphere with minimal direct supervision with drive toward accomplishment, and to produce high quality work. ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT • _Must remain drug free, • Exposure to dust/dirt/fumes/fiberglass, • Ability to work in wet environments: including head and feet, • Industrial manufacturing environment with extreme temperature variation, • Exposure to sounds or noise levels that maybe uncomfortable (hearing protection is provided), • Ability to wear applicable PPE for up to 12 hours, • Ability to distinguish colors and shading, • Ability to become certified to operate a forklift, • Prolonged sitting, standing, or walking for 8 - 12 hour shifts, • Bending and twisting; repetitive movements, • Able to do repetitive hand, arm, leg movements for up to 12 hours, • Must be able to squat, bend at the waist and knees freely, • Be able to climb up to three floors or stairs, use full upper body movement for process; stand up to 12 hours with breaks, • Ability to work from heights, • Lift, push and pull 40lbs.repetitively, • _Handle, control, feed, or feel objects, tools or product, • Must be able to work flexible rotating shift schedules - mandatory overtime as required This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, and abilities. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship. Nearest Major Market: Houston

Location(s): Houston, TX, US, 77029 Function: Manufacturing Audience: Hourly Work Arrangement: On Site Requisition ID: 68732 Maintenance Mechanic 3rd Class Job Description Job Title:Maintenance Mechanic 3rd - Class Department:Maintenance Reports to:Maintenance Leader Pay: $32.15 Supervises:N/A FLSA Status:Non-Exempt Date:9/18/23 SUMMARY The purpose of the3rd class mechanicisto perform as professional, highly skilled and exceptionally competent maintenance person. Participates in teams to develop and implement solutions. JOB DUTIES AND RESPONSIBILITIES PRINCIPAL DUTIES AND RESPONSIBILITIES: Plant and Environmental Safety • _Lives the Owens Corning Safety Stand and meets all safety requirements. Safety is a condition of employment., • Take personal ownership to work safely and hold other team members to the same high standards of safety, • Notify supervisor immediately of any accident, near miss or on- the -job injury when it occurs no matter how insignificant it may seem., • Participates in the safety, quality, autonomous maintenance, TPM and housekeeping programs as established within the plant; including but not limited to Focused Improvement Events, Safety Committee, Training, etc., • Performs job tasks to reduce environmental impact and adheres to the environmental regulations and recycling procedures for waste disposal., • Complies with all plant rules and safety regulations., • Performs cleanup duties at workstations and/or equipment/machinery., • Communicates safety concerns and/or equipment problems/abnormalities to appropriate personnel, maintaining strong communication with the appropriate line section operators to ensure immediate action is taken for product out of spec., • Inspect vehicles before use and throughout shift, keeping all equipment clean and operational. TPM • Participates in plant TPM initiatives - completing activities associated with TPM tasks (adheres to CILT standard, 5S)., • Continues to use TPM methodology to gain a better understanding of the equipment., • Identifies and participates proactively in learning opportunities and develops expertise in those areas., • Utilizes Focus Improvement tools to problem solve., • Works to achieve zero injuries, zero defects and zero losses., • During PM days, uses time effectively to bring equipment to optimal condition for zero losses., • Maintain DM and Step Boards. Maintenance • Energy Control Procedures (ECP's) and Lock Tag Try (LTT) system. Respect for the potential hazards within the manufacturing operation. Training and regular auditing of the process., • Fluent in the language of the plant., • Computer literacy - email, simple spreadsheet, word doc., • Safe rigging procedures., • Forklift operation, licensed - will provide certification., • PLCbasics -- Ability to identify key components of a PLC and describe their function, • Troubleshooting basics, how to analyze a problem and step to the root cause. Help reduce cycle time to problem resolution and eliminates the "replace and see what happens method"., • Process 101 - Basic concepts of what it takes to consistently manufacture shingles. Critical product characteristics, key process variables, customer needs etc., • Business 101 - World Class Manufacturing (WCM) concepts, what are they, individual and business benefits. Key business metrics and focus., • Installs, modifies or maintains plant equipment and assists in determining appropriate methods to accomplish these tasks., • Must work safely and follow all documented and "common sense" safety policies and procedures., • Read, understand, and analyze blueprints and other technical data references., • Expert use of hand and power tools., • Inspects plant equipment to identify potential problems prior to breakdown occurrences., • Complies with good housekeeping practices on the job and insures work areas are clean and picked up after each job completion., • Follows all environmental compliance polices & programs., • Work as instructed with outside contractors. Mechanical • Ability to properly precision align belt, gear or direct coupled shafts using proper tools to specified tolerances., • Understanding of lubrication principles and bearing tolerances and basic bearing "physics"-I.E. how does it work in terms of need for extreme care, keeping clean, etc., • Hydraulic systems understanding - identify and describe the function of hydraulic components, • Same as above for compressed air and steam, (where applicable) systems., • Understanding of pump basics and operating characteristics including effects of suction pressures, head pressures, sealing/packing techniques., • Ability to track conveyor belts properly and understanding the physics of belt operation and tracking including bucket elevators; belt splicing., • Ability to read air and power fluid schematics., • Basic welding for all; structural and piping welding for at least one craft per plant., • Pipefitting - alignment, flange, threading., • Basic electrical component "how they work" understanding: solenoids, motors, heaters, contacts, and photoeyes., • Ultrasonic rotating equipment troubleshooting. Electrical • Basic industrial electrical code., • Capability to read schematics and P&ID drawings., • Fusing, thermal overload protection, wire sizing, motor theory, etc., • AC, DC and Servo drive system (basics)., • Be able to safely conduct motor control and power circuit troubleshooting. Understand fuse sizing, take motor amp readings, understand basic DC motor control, etc., • Ability to fully understand the various control loops in the plant including IM/APC systems and weight control equipment., • Burner system understanding, troubleshooting and properly tuning Other • _Demonstrate the ability to effectively communicate., • Support the training and development of colleagues., • Demonstrates flexibility to changing priorities as business needs dictate., • Identifies and participates proactively in learning opportunities, and develops expertise in those areas., • Follows standard operating procedures and processes., • Can and is willing to make decisions. Knows the chain of command to get support., • Regular Attendance on site and the ability to rotate varying shifts., • All other duties as assigned or needed. _JOB REQUIREMENTS SKILLS AND ABILITIES The employee should hold the following skills and abilities: • _Demonstrated desire to impact safety, • Must be able to work independently or in a team atmosphere with minimal direct supervision, • Demonstrated mechanical aptitude and the ability to troubleshoot, • High attention to detail, • Demonstrated ability to multi-task, • Basic mathematics skills, • Able to effectively communicate (read, write, speak, understand) English, • Basic Electrical, • Basic PLC, • Basic Hydraulic, • Basic Pneumatics, • Basic Blueprint & Schematic reading, • Proficient in SAP PM Module _COMPUTER AND SOFTWARE COMPENTENCIES The employee must be able to: • Work with a computer to perform basic data entry, • Demonstrate basic computer skills such as_Microsoft Outlook, IVC and SAP. EDUCATION AND/OR EXPERIENCE • High School Diploma or GED Equivalent required., • Manufacturing or process related experience preferred., • Preferably five (5) years in a related maintenance trade or occupation that involved electrical, hydraulic machinery and equipment in a manufacturing environment., • Able to demonstrate trouble-shooting techniques and have a basic understanding of blueprints., • Basic ability and knowledge of welding practices and hydraulic circuitry., • Advanced understanding of electrical circuitry., • Basic PLC knowledge., • Must have the ability to interpret instructions furnished in written, oral, diagram or schedule form., • Flair for working with large industrial machines., • Must be able to work independently or in a team atmosphere with minimal direct supervision with drive toward accomplishment, and to produce high quality work. ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT • _Must remain drug free, • Exposure to dust/dirt/fumes/fiberglass, • Ability to work in wet environments: including head and feet, • Industrial manufacturing environment with extreme temperature variation, • Exposure to sounds or noise levels that maybe uncomfortable (hearing protection is provided), • Ability to wear applicable PPE for up to 12 hours, • Ability to distinguish colors and shading, • Ability to become certified to operate a forklift, • Prolonged sitting, standing, or walking for 8 - 12 hour shifts, • Bending and twisting; repetitive movements, • Able to do repetitive hand, arm, leg movements for up to 12 hours, • Must be able to squat, bend at the waist and knees freely, • Be able to climb up to three floors or stairs, use full upper body movement for process; stand up to 12 hours with breaks, • Ability to work from heights, • Lift, push and pull 40lbs.repetitively, • _Handle, control, feed, or feel objects, tools or product, • Must be able to work flexible rotating shift schedules - mandatory overtime as required This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, and abilities. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship. Nearest Major Market: Houston

Location(s): Houston, TX, US, 77029 Function: Manufacturing Audience: Hourly Work Arrangement: On Site Requisition ID: 67153 Maintenance Mechanic 1st Class Job Description Job Title: Maintenance Mechanic 1st - Class Department: Maintenance Reports to: Maintenance Leader Pay: $39.54 Supervises: N/A FLSA Status: Non-Exempt Date: 9/18/23 SUMMARY The purpose of the Maintenance Mechanic 1st Class is to perform as professional, highly skilled and exceptionally competent maintenance person. Participates in teams to develop and implement solutions. JOB DUTIES AND RESPONSIBILITIES PRINCIPAL DUTIES AND RESPONSIBILITIES: Plant and Environmental Safety • _Lives the Owens Corning Safety Stand and meets all safety requirements. Safety is a condition of employment., • Take personal ownership to work safely and hold other team members to the same high standards of safety, • Notify supervisor immediately of any accident, near miss or on- the -job injury when it occurs no matter how insignificant it may seem., • Participates in the safety, quality, autonomous maintenance, TPM and housekeeping programs as established within the plant; including but not limited to Focused Improvement Events, Safety Committee, Training, etc., • Performs job tasks to reduce environmental impact and adheres to the environmental regulations and recycling procedures for waste disposal., • Complies with all plant rules and safety regulations., • Performs cleanup duties at workstations and/or equipment/machinery., • Communicates safety concerns and/or equipment problems/abnormalities to appropriate personnel, maintaining strong communication with the appropriate line section operators to ensure immediate action is taken for product out of spec., • Inspect vehicles before use and throughout shift, keeping all equipment clean and operational. TPM • Participates in plant TPM initiatives - completing activities associated with TPM tasks (adheres to CILT standard, 5S)., • Continues to use TPM methodology to gain a better understanding of the equipment., • Identifies and participates proactively in learning opportunities and develops expertise in those areas., • Utilizes Focus Improvement tools to problem solve., • Works to achieve zero injuries, zero defects and zero losses., • During PM days, uses time effectively to bring equipment to optimal condition for zero losses., • Maintain DM and Step Boards. Maintenance • Energy Control Procedures (ECP's) and Lock Tag Try (LTT) system. Respect for the potential hazards within the manufacturing operation. Training and regular auditing of the process., • Fluent in the language of the plant., • Safe rigging procedures., • Advanced PLC -- Ability to use laptop for troubleshooting and see what limit switch or photo eye isn't working and ability to adjust where needed. Internal various timers in the program; the ability to access status files to diagnose and clear PLC faults., • Advanced Troubleshooting, how to analyze a problem and step to the root cause. Help reduce cycle time to problem resolution and eliminates the "replace and see what happens method". Ability to lead others in troubleshooting, • Process - Advanced concepts of what it takes to consistently manufacture shingles. Critical product characteristics, key process variables, customer needs etc., • Business - World Class Manufacturing (WCM) concepts, what are they, individual and business benefits. Key business metrics and focus., • Installs, modifies or maintains plant equipment and assists in determining appropriate methods to accomplish these tasks., • Must work safely and follow all documented and "common sense" safety polices and procedures., • Read, understand, and analyze blueprints and other technical data references., • Expert use of hand and power tools., • Inspects plant equipment to identify potential problems prior to breakdown occurrences., • Complies with good housekeeping practices on the job and insures work areas are clean and picked up after each job completion., • Follows all environmental compliance polices & programs., • Work as instructed with outside contractors. Mechanical • Machining bores, keyways, drill press, grinding; lathe and mill operation., • Ability to properly, precision align belt, gear or direct coupled shafts using proper tools to specified tolerances., • Understanding of lubrication principles and bearing tolerances and advanced bearing physics-I.E. how does it work in terms of need for extreme care, keeping clean, etc., • Advanced hydraulic systems understanding - hydraulic flow principles. Effects of pipe sizes and valves on pressure drops, making proper fittings per system requirements, proper valve application, etc. Applied to water systems, hot oil, and hydraulic systems., • Same as above for compressed air and steam, (where applicable) systems., • Advanced understanding of pump and operating characteristics including effects of suction pressures, head pressures, sealing/packing techniques., • Ability to track conveyor belts properly and understanding the physics of belt operation and tracking including bucket elevators; belt splicing., • Ability to read air and power fluid schematics., • Advanced welding for all; structural and piping welding for at least one craft per plant., • Pipefitting - alignment, flange, threading., • Advanced electrical component understanding: solenoids, motors, heaters, contacts, and photoeyes., • Ultrasonic rotating equipment troubleshooting. Electrical • Advanced industrial electrical code., • Capability to read schematics and P&ID drawings., • Fusing, thermal overload protection, wire sizing, motor theory, etc., • AC/DC and Servo drive system (advanced)., • Be able to safely conduct motor control and power circuit troubleshooting. Understand fuse sizing, take motor amp readings, understand advanced DC motor control, etc., • Ability to fully troubleshoot AC/DC variable frequency drive, and communicate technically with outside technical support when needed., • Ability to fully understand the various control loops in the plant including IM/APC systems and weight control equipment., • Fully competent in electrical noise avoidance-grounding, shielding, etc., • Burner system understanding, troubleshooting and properly tuning Other • _Demonstrate the ability to effectively communicate., • Support the training and development of colleagues., • Demonstrates flexibility to changing priorities as business needs dictate., • Identifies and participates proactively in learning opportunities, and develops expertise in those areas., • Follows standard operating procedures and processes., • Can and is willing to make decisions. Knows the chain of command to get support., • Regular Attendance on site and the ability to rotate varying shifts., • All other duties as assigned or needed. _JOB REQUIREMENTS SKILLS AND ABILITIES The employee should hold the following skills and abilities: • _Demonstrated desire to impact safety, • Must be able to work independently or in a team atmosphere with minimal direct supervision, • Demonstrated mechanical aptitude and the ability to troubleshoot, • High attention to detail, • Demonstrated ability to multi-task, • Advanced mathematics skills, • Able to effectively communicate (read, write, speak, understand) English, • Advanced Electrical, • Advanced PLC, • Advanced Hydraulic, • Advanced Pneumatics, • Advanced Blueprint & Schematic reading, • Proficient in SAP PM Module _COMPUTER AND SOFTWARE COMPENTENCIES The employee must be able to: • Work with a computer to perform advanced data entry, • Demonstrate advanced computer skills such as _Microsoft Outlook, IVC and SAP. EDUCATION AND/OR EXPERIENCE • High School Diploma or GED Equivalent required., • Manufacturing or process related experience preferred., • Preferably five (5) years in a related maintenance trade or occupation that involved electrical, hydraulic machinery and equipment in a manufacturing environment., • Able to demonstrate trouble-shooting techniques and have a advanced understanding of blueprints., • Advanced ability and knowledge of welding practices and hydraulic circuitry., • Advanced understanding of electrical circuitry., • Advanced PLC knowledge., • Must have the ability to interpret instructions furnished in written, oral, diagram or schedule form., • Flair for working with large industrial machines., • Must be able to work independently or in a team atmosphere with minimal direct supervision with drive toward accomplishment, and to produce high quality work. ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT • _Must remain drug free, • Exposure to dust/dirt/fumes/fiberglass, • Ability to work in wet environments: including head and feet, • Industrial manufacturing environment with extreme temperature variation, • Exposure to sounds or noise levels that maybe uncomfortable (hearing protection is provided), • Ability to wear applicable PPE for up to 12 hours, • Ability to distinguish colors and shading, • Ability to become certified to operate a forklift, • Prolonged sitting, standing, or walking for 8 - 12 hour shifts, • Bending and twisting; repetitive movements, • Able to do repetitive hand, arm, leg movements for up to 12 hours, • Must be able to squat, bend at the waist and knees freely, • Be able to climb up to three floors or stairs, use full upper body movement for process; stand up to 12 hours with breaks, • Ability to work from heights, • Lift, push and pull 40lbs.repetitively, • _Handle, control, feed, or feel objects, tools or product, • Must be able to work flexible rotating shift schedules - mandatory overtime as required This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, and abilities. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship. Nearest Major Market: Houston

Maintains a proper Daily Schedule Control for equipment maintenance and preventative maintenance schedule and record;. Familiar with standard maintenance procedures, preventative maintenance schedules, and proper safety techniques;. Vestis® Industrial Laundry Facility Maintenance Technician.

HEM (Industrial Maintenance Mechanic/Millwright). Demonstrate good understanding of the proper use of mechanical tools and application of acceptable mechanical principles. Demonstrate proficiency in reading blueprints to fabricate, assemble, and troubleshoot mechanical equipment and/or piping system

Performs scheduled maintenance on plant equipment and machinery. Responds to and corrects equipment stoppage/mechanical breakdown. Experience in Heating, Ventilation, and Air Conditioning; Welding, Electronics, Electrical repairs, Industrial Equipment installations, alignment, start-up repairs, etc.

Adjusts functional parts of devices and control instruments by using hand tools, levels, plumb bobs, and straightedges. Maintains equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orde

Job Description Do you have the need for speed? Do you thrive in a fast paced, energetic work environment that focuses on serving our customers? If so, K1 Speed is the place for you. As the nation’s indoor electric karting leader and innovator for over the past decade, K1 Speed does not compromise on the quality and value of the product we offer. Through our industrial go-karts and excellent staff, our passion is to show the world how fun karting can actually be. As a Shift Supervisoryou will train staff on being the best they can be. You love working with a team and being a leader. Is this you? Duties and Responsibilities: • Cash handling duties including preparation of tills, change fund maintenance, and preparation of deposits, • Customer interaction and auditing of customer experience including but not limited to event execution, • Ensuring that cashier personnel adhere to correct cash handling procedures and sell effectively, • Ensuring that track personnel run races safely and efficiently, • Ensuring that mechanic personnel maintain our karts in peak working condition, • Ensuring that all staff are strictly adhering to company policies and providing outstanding customer service, • Ordering and purchasing operation supplies, concessions, and retail merchandise, • Performing operational paperwork duties including safety, payroll, facility, • Contributing to schedules and employee communications, • Corresponding with and providing regular reports to Management, • Maintaining the effective operational feasibility of the center, • Maintaining the highest standard of facility appearance including storage areas and the parking lot, • Coordinate with your Manager and Regional Manager to ensure that all facility maintenance is performed quickly Job Requirements: • Must be able to safely lift/push/pull heavy objects on an ongoing basis., • Must have previous supervisory experience and a successful track record, preferably in the following fields: Restaurant, Entertainment, Hospitality, Bowling Alleys, Amusement Parks, Miniature Golf, • Great customer service skills-Must be able to work weekends and evenings, • A Drug Test and Background Check is required prior to employment