Trabajos industrial maintenance en Poughkeepsie, New YorkCrear alertas

Job Description SUMMARY STATEMENT: Performs all activities necessary for the cleaning and sanitizing of production and packaging equipment daily while ensuring that all duties are performed in accordance with SSOP, HACCP, FDA, GMP’s, Safety policies, procedures as well as any other established policies and requirements necessary. Perform assigned task in relation to the cleaning and sanitizing of the manufacturing facility and equipment, in a timely manner and in accordance with quality standards and government regulations. This position reports to the Sanitation Supervisor and will serve as backup for the Supervisor position when necessary. PRIMARY DUTIES AND RESPONSIBILITIES: Follows all SSOP’s related to assigned task and accurately completes related documentation (including any necessary corrective action that was taken). Remove all trash and debris from the production processing, packaging, & dock areas. Clean up any spills of product or other foreign matter. Operate power scrubber, Foamer, forklift, and other cleaning equipment. Clean and Sanitize restrooms, offices, break rooms, conference rooms, and locker rooms when cleaning company is not present. Follow Master Sanitation daily, weekly, monthly, quarterly schedules as assigned by supervisor to ensure continuous sanitation maintenance program. Maintain chemical storage area in a clean and safe working environment. Perform other duties as directed by Supervisor. Confers with Sanitation Supervisor to receive scheduled sanitizing and cleaning assignments. Clean facility, walls, floors, racking, doors, etc. Clean facility building, grounds, lighting, parking lots, etc. May be designated by supervisor to supervise other Technicians when Sanitation Supervisor is not available. May be designated by supervisor to verify daily Technician task sheets and the Sanitation Schedule when Sanitation Supervisor is not available. Disassemble, clean, sanitize, and reassemble food processing equipment and machinery. Operate sanitation equipment including pressure washers, foaming units, COP tanks, floor scrubbers, and chemical dispensing systems. Clean conveyors, mixers, fillers, cookers, packaging equipment, and other production machinery. Verify equipment cleanliness through visual inspection and established sanitation verification procedures. Remove product residues, allergens, and debris from equipment and facility surfaces. REQUIRED SKILLS Able to read, write and communicate effectively, as it relates to the job and to the safety regulations Understand and follow written and verbal instructions Standing or walking 100% of the time. Must be able to carry, twist, bend, and stoop in conjunction with frequent lifting up to 50 pounds. You should be proficient in: • Industrial Cleaning Equipment Operation

Job Description Maintenance Technician- Retail (Painter) Location: Multi-Site (NY/NY/CT) Travel required Department: Maintenance Reports To: Kris Klizner Company Overview Chestnut Group is a trusted convenience retail brand, preferred fuels marketer and exceptional place to work in the tri-state area. The family-owned company owns and operates gas stations and convenience stores under the Chestnut Market brand and is a preferred supplier for premium fuel flags including Shell, Exxon Mobil and BP among others. The company has a growing portfolio of retail, wholesale and food service operations across the Northeast. Chestnut Group is focused on creating and delivering exceptional people-first convenience with care – every experience, every time. Come join our growing and passionate team! Position Summary Chestnut Market is seeking a skilled, reliable, and detail-oriented Maintenance Tech that specializes in Facilities Painting to support the appearance, maintenance, and brand standards of retail convenience store locations and company facilities. This role is responsible for performing interior and exterior commercial painting, surface preparation, drywall repair, touch-ups, and minor facility maintenance across multiple locations. The ideal candidate has experience in commercial or retail painting, understands safety and maintenance procedures, and can work independently while maintaining high-quality workmanship in a fast-paced retail environment. This position requires regular travel between store locations and flexibility to work early mornings, evenings, or overnight shifts when needed to minimize disruption to store operations. Our Values • Safety – We protect the well‑being of our people, partners, and communities., • Quality – We deliver unmatched experiences and service., • Unity – We collaborate to achieve shared goals., • Integrity – We do the right thing, always., • Responsibility – We take ownership of our work and outcomes., • Respect – We treat everyone with dignity., • Empowerment – We give people the tools to succeed., • Love – We bring passion to everything we do. Our behaviors emphasize operating with excellence, creating welcoming environments, rewarding performance, communicating openly, staying accountable, and approaching challenges with a growth mindset. Key Responsibilities Painting & Surface Preparation • Perform interior and exterior commercial painting for convenience store and fuel station locations, • Prepare surfaces through sanding, scraping, patching, caulking, priming, pressure washing, and drywall repair, • Apply paints, coatings, stains, and finishes using brushes, rollers, and spray equipment, • Complete touch-ups and repainting projects to maintain company brand standards and professional appearance, • Ensure proper paint matching, finish consistency, and quality workmanship across all locations Facilities Maintenance Support • Perform minor carpentry, drywall, and general maintenance repairs as needed, • Assist with preventative maintenance and facility improvement projects, • Maintain clean, organized, and safe work environments during and after projects, • Identify maintenance concerns and report facility issues to management promptly Safety & Compliance • Follow OSHA regulations, company safety standards, and PPE requirements at all times, • Safely operate ladders, scaffolding, lifts, pressure washers, and painting equipment, • Properly handle, store, and dispose of paints, chemicals, and maintenance materials, • Maintain compliance with workplace safety procedures and accident prevention practices Operational Support • Coordinate work schedules with store management to minimize operational disruptions, • Maintain painting supplies, inventory, tools, and equipment, • Travel regularly between company locations to complete assigned projects, • Support additional maintenance or facilities-related duties as assigned Required Qualifications • 2+ years of commercial, industrial, or retail painting experience preferred, • Experience in convenience store, retail, restaurant, or multi-site environments strongly preferred, • Knowledge of painting techniques, coatings, drywall repair, and surface preparation methods, • Ability to work independently with minimal supervision, • Strong attention to detail, organization, and time management skills, • Valid driver’s license with reliable transportation required, • Ability to travel regularly between store locations, • Basic knowledge of maintenance repair and handyman tasks preferred, • Ability to read and follow safety procedures, work orders, and maintenance instructions Preferred Skills • Commercial painting and finishing experience, • Drywall patching and repair skills, • Basic carpentry and facilities maintenance knowledge, • Experience operating paint sprayers, pressure washers, ladders, and lifts, • Familiarity with OSHA standards and workplace safety procedures, • Ability to work flexible schedules, including overnight or early morning shifts when needed, • Strong communication and problem-solving skills Physical Requirements • Ability to stand, walk, bend, climb, kneel, and lift throughout the workday, • Ability to lift and carry up to 50 pounds regularly, • Comfortable working at heights using ladders, scaffolding, and lifts, • Ability to work indoors and outdoors in varying weather conditions, • Ability to work safely around active retail and fuel operations Compensation & Benefits • Company vehicle and gas card, • Comprehensive health coverage, • 401(k) with company match, • Generous paid time off (PTO), • Professional development and growth opportunities

Job Description Experienced Framer/Carpenter Westchester Modular Homes, Inc. Location: Wingdale, NY Job Type: Full-time Shift: Mon-Fri Compensation: $20 to $30 an hour Job Summary We are seeking an experienced Framer/Carpenter to join our modular home production team. In this role, you will operate industrial saws to cut lumber, panels, and engineered wood according to exact blueprints. Your work forms the foundation for our assembly teams, requiring high precision, speed, and a strong commitment to workshop safety. Key Responsibilities • Operate Equipment: Safely run industrial saws, including radial arm saws, miter saws, and component saws., • Read Cut Lists: Interpret blueprints, construction drawings, and cut lists for daily production needs., • Quality Control: Inspect lumber for defects and verify dimensions against technical drawings., • Maintenance: Perform daily machine cleanings. Qualifications & Skills • Experience: 10+ years of experience in woodworking, carpentry, framing, roofing or a manufacturing plant environment., • Physical Ability: Ability to stand for 8–10 hours and repeatedly lift up to 50 lbs., • Safety Mindset: Strict adherence to PPE requirements (safety glasses, hearing protection, steel-toe boots). Benefits • Competitive hourly wage based on experience., • Employee - owned company(ESOP) with up to 100% contribution annually depending on years of service., • Year- end production bonus., • 401(k) savings account with up to 4% match to the employee’s contribution., • Generous group insurance plans: Major Medical, Hospitalization, Dental, Prescription, Life and Disability., • PTO/Paid Holidays., • Employee home purchase program., • Credit Union banking services., • Leaves for marriage, jury service and funerals. Westchester Modular Homes is an Equal Opportunity Employer.

Peckham Industries Graduate Leadership Development Program Please wait while the page is processing... chevronleft Back to Job PostingsApply Now Print _ Position Title: Graduate Leadership Development Program Date Posted: 10/15/2026 Location: Pleasant Valley, NY Job Category: General Applicant Salary Interval: Full Time Pay Range: $75,000.00 - $80,000.00 Application Instructions About Us: Peckham Industries Inc. (PII) has been a family-run business since 1924 and we believe our _ ethos delivers value as the trusted supplier of construction materials, products, and services in the communities we serve. Through our extensive network of hot mix asphalt and ready-mix concrete plants, quarries, and liquid asphalt terminals, PII delivers the highest quality materials and custom solutions to thousands of road construction and road maintenance customers. In addition, the companys construction operations include paving and road reclamation services, as well as precast/prestressed concrete production and erection of multi-level parking structures, specialty buildings, and bridge components. Become part of our mission by realizing your purpose, serving our community interests, and delivering growth for our customers. Peckham Industries educates, innovates, and applies technology in a way that is safe, sustainable, inclusive, and profitable. Position Description Program Summary: The Materials Graduate Leadership Development Program (GLDP) is a structured, 18-24 months rotational program designed to develop future leaders within Peckham Industries materials businesses. Participants rotate through core functional areas including quarry operations, plant administration, environmental compliance, quality control, safety, HMA operations, and sales. The program combines hands-on field experience, formal training, mentorship, and leadership development. Upon successful completion, graduates are expected to be prepared to assume a leadership role such as Assistant Plant Manager at one of Peckhams materials operations. Program Learnings: • Safety always wins. Uphold and promote Peckham Industries safety culture by adhering to all company, OSHA, and MSHA policies and proactively supporting a safe work environment across all assigned locations., • Dedication. Participate in structured rotations across materials operations, including quarry operations, plant administration, quality control, environmental compliance, HMA operations, and sales, to develop a comprehensive understanding of the materials business., • Results matter. Support quality control activities through material sampling, testing, and performance evaluation to ensure aggregates and hot mix asphalt meet internal standards and customer specifications., • Assist with quarry and mining operations by supporting mine planning, crushing and screening activities, and regulatory compliance efforts related to blasting and permitting., • Determined. Engage in hot mix asphalt plant operations by supporting production processes, maintenance activities, and performance monitoring to achieve efficient and reliable plant operations., • Measurement . Analyze operational data, key performance indicators, inventory levels, and cost drivers to support informed decision-making and continuous improvement initiatives., • Our word is our bond. Support environmental and regulatory initiatives by participating in permit reviews, environmental safety practices, and compliance-related activities across materials operations., • Respect and engage. Collaborate with sales and customer-facing teams to understand pricing, transportation costs, customer needs, and service expectations while supporting customer visits as needed., • Mastery. Demonstrate leadership potential by working effectively with cross-functional teams, applying continuous learning, and completing required training and mentorship activities in preparation for a future leadership role. Position Requirements Requirements, Education and Experience: • Bachelors degree required in Mining, Civil, Industrial, or Mechanical Engineering; Construction Management; Business Administration; or a closely related field. Associates degree may be considered with strong academic performance and relevant materials, quarry, plant, heavy civil, internship, co-op, or field experience., • Minimum GPA of 3.5 or higher preferred, • Excellent listening skills and ability to communicate effectively, • Well organized and efficient in time management, • Proficient user of Microsoft products, e.g., Excel, Outlook, Teams, and Word, • Professional verbal and written communication skills, • Well organized with problem solving and adaptability skills, • High degree of accuracy, thoroughness, and attention to details, • Must have clean driving record and own reliable transportation., • Legal right to work in the U. S. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. The actual rate or salary offered will be determined based on job-related factors, including relevant experience, education, qualifications, skills, and other legitimate business considerations, consistent with applicable law and the Companys compensation practices. Travel: Position will require travel by personal vehicle to offices throughout the state of New York, and New England based on the needs of the business. Work Environment/Physical Demands: Medium Work: May be required to exert up to 50 pounds of force occasionally, and/or up-to 10 pounds of force frequently, and or a negligible amount of force constant to move objects. Job involves sitting, standing, walking, climbing, reaching, and bending for brief periods of time in all types of weather. While performing the duties of this job, the employee is regularly required to talk and hear, to communicate to employees/visitors. This position is also occasionally set in a professional work environment. Values: At Peckham, you will experience our values wherever you work: corporate offices, plants, quarries, or paving operations. We share a common set of values - safety, integrity, dedication, and efficiency which are embedded in how we show up every day. Ours is a culture where we protect family and friends, our word is our bond, we are committed to serve and results matter. Our values are the foundation of our growth, and we believe will pave the way for future success. ^PMC^ Equal Opportunity Employer Peckham Industries, Inc. (PII) is an Equal Employment Opportunity (EEO) and Affirmative Action employer. It is our policy to provide EEO to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, pregnancy or pregnancy-related condition, or any other characteristic protected by federal, state or local law. Under the Americans with Disabilities Act or similar law, if you have a disability and you wish to discuss potential accommodations related to applying for employment at Peckham, please contact Recruitment@peckham.com. Please wait ... Compensation details: 75000-80000 Yearly Salary PI430f90ed8454-30134-41868595

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Company parties, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development Benefits/Perks • Competitive Compensation, • Great Work Environment, • Career Advancement OpportunitiesJob Summary We are seeking a Millwright to join our team! As a Millwright, you will work closely with the entire team to assemble, erect, and install both major and minor equipment, as well as maintain all current and past equipment to ensure everything is running smoothly. You will also be responsible for making any modifications to equipment as needed, and may help train new staff on existing equipment to ensure it is properly utilized. The ideal candidate has experience in industrial maintenance, has a great analytical mind, and strong attention to detail. Responsibilities • Assemble, erect, and install equipment accurately and safely, • Make minor and major repairs or maintenance to equipment, • Work closely with the team to ensure everyone understands how to safely operate and maintain all existing equipment Qualifications, • Experience in industrial maintenance desired, • Strong analytical skills, • Excellent troubleshooting and problem solving skills, • Strong communication and interpersonal skills, • The ability to learn under pressure and navigate new situations

Maintenance Mechanic Role with Growing Precision Machine Shop / $25-$40 an hour depending on Experience / Room for Growth and Great Benefits This Jobot Job is hosted by: Ken McClure Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $25 - $40 per hour A bit about us: We are a well-established precision manufacturing company with over 50 years of experience providing high-quality machined parts and assemblies to industries including aerospace, medical, semiconductor, electronics, and industrial manufacturing. Our capabilities include CNC machining, fabrication, welding, and assembly. We pride ourselves on quality craftsmanship, advanced technology, and delivering reliable solutions to our customers. Why join us? $25-$40 an hour depending on Experience 1st Shift - 7:00am-3:30pm Excellent Benefits Room for Growth 401k PTO Job Details Troubleshoot, Repair, and Maintain CNC Machinery Electrical and Mechanical Troubleshooting Mechanical Breakdowns and Rebuilds Single Phase and Three Phase Electrical Working up to 480v Follow PM Schedule Utilizing Hand and Power Tools Lock out/Tag out Hydraulics and Pneumatics Understanding of Machining Process Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

CNC Machinist Role with Growing Custom Shop / $25-$40 an hour depending on Experience / Room for Growth and Great Benefits This Jobot Job is hosted by: Ken McClure Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $25 - $40 per hour A bit about us: We are a well-established precision manufacturing company with over 50 years of experience providing high-quality machined parts and assemblies to industries including aerospace, medical, semiconductor, electronics, and industrial manufacturing. Our capabilities include CNC machining, fabrication, welding, and assembly. We pride ourselves on quality craftsmanship, advanced technology, and delivering reliable solutions to our customers. Why join us? $25-$40 an hour depending on Experience Opening on Both Shifts: 1st Shift - 7:00am-3:30pm 2nd Shift - 3pm - 1:30am 30% Shift Differential Excellent Benefits Room for Growth 401k PTO Job Details Read/Interpret Blueprints Set up and Operate CNC Mori Seiki and Mitsubish Vertical, Horizontal, and Turning Machinery Edit G and M Codes Changing of Tooling Work with various materials Hold Tight Tolerances Responsible for 1st piece and in process inspections Averaging 1-3 set ups a day Preventative Maintenance on Machinery Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Location: Ravena Cement Plant NY\n Job Req ID: 17375\n \n \nJoin our amazing team and contribute as a:\n \n \nOperational Safety Support Specialist\n \n ABOUT THE ROLE\n \nWe are seeking a detail-oriented and safety-conscious Inspection Technician to perform regular inspections on critical safety and operational equipment across our facility. The successful candidate will play a vital role in maintaining compliance with regulatory standards and ensuring a safe working environment for all personnel.\n \n WHAT YOU'LL ACCOMPLISH\n \n\n • Conduct routine inspections of fire suppression pumps and perform monthly fire extinguisher inspections Provide H&S expertise and support to site management and supervisors for the management of H&S\n, • Coordinate and oversee annual fire extinguisher inspections with certified vendors\n, • Perform anchor point and fall protection equipment inspections\n, • Conduct handrail, ladders, stairway, and walkway safety inspections\n, • Inspect hoists, lifts, slings, and rigging equipment for wear, damage and compliance\n, • Perform inspections and maintenance checks on man lifts, skid steers, and forklifts\n, • Complete and maintain logbook entries for all equipment and inspections\n, • Inspect AED units and ensure that they are fully operational and perform regular checks on emergency eyewash stations\n, • Report defect and safety concerns promptly\n, • Other responsibilities as assigned\n, • Maintain and accurately record inspection logs and ensure all documentation is up to date and accessible\n, • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors\n\n \n WHAT WE'RE LOOKING FOR\n Education: High school diploma or equivalent or 3 years of equivalent experience\n Field of Study Preferred: Prior experience in equipment of safety inspections, maintenance or related field.\n Required Work Experience: 1 - 3 years required experience\n Required Technical Skills: Proficiency in Microsoft Office Suite to include Excel, Word and PowerPoint. SAP experience preferred.\n Travel Requirements: 0-10%\n \n Additional Requirements:\n \n\n • Knowledge of MSHA standards and safety regulations is plus\n, • Comfortable working at heights and in an industrial environment\n, • Ability to identify safety hazards and recommend corrective actions\n, • Basic computer skills for data entry and record-keeping\n, • Comfortable working in varied environmental conditions (indoor/outdoor, hot/cold)\n, • Ability to stand, walk, bend and climb ladders throughout the workday.\n, • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests.\n\n \n WHAT WE OFFER\n \n\n • Competitive salary\n, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings\n, • Medical, Dental, Disability and Life Insurance\n, • Holistic Health & Well-being programs\n, • Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care\n, • Vision and other Voluntary benefits and discounts\n, • Paid time off & paid holidays\n, • Paid Parental Leave (maternity & paternity)\n, • Educational Assistance Program\n, • Dress for your day\n\n \n Amrize is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.\n \n \nWe thank all applicants for their interest; however, only those selected for an interview will be contacted.\n \n BUILDING INCLUSIVE WORKSPACES\n \nAt Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! \n \n \nAmrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. Amrize North America Inc. participates in E-Verify and will provide the federal government with your I-9 information to confirm that you are authorized to work in the United States.\n \n \nIn compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email recruiting-accommodations@amrize.com. This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process.\n \n \nWhile we sincerely appreciate all applications, only candidates selected for an interview will be contacted.\n \n PROTECT YOURSELF FROM RECRUITMENT FRAUD\n \nThe only way to apply for a position at Amrize is through our official Careers website. Be cautious of unsolicited offers or requests for information from other sources. Learn how to protect yourself from recruitment fraud here: Fraudulent Job Offers Policy

Become a trusted advisor to maintenance managers, fleet managers, plant engineers, shop owners, and business owners. Freedom to manage your own schedule and territory. B2B outside sales experience (industrial, fleet, construction, equipment, manufacturing, agricultural, or technical sales preferred)

Job DescriptionESSENTIAL DUTIES AND RESPONSIBILITIES • Maintain, troubleshoot, and repair production, facility, and utility equipment in a food manufacturing environment to support safe and efficient operations., • Respond promptly to production line calls, diagnose equipment issues, and communicate repair status and expected downtime to Production and Maintenance Leadership., • Perform preventive maintenance, lubrication, and inspections in accordance with the Preventive Maintenance Program to ensure equipment reliability and minimize downtime., • Troubleshoot and repair mechanical, electrical, pneumatic, and basic control system issues on production and facility equipment., • Safely dismantle, repair, adjust, and reassemble machinery and equipment as required., • Inspect replacement parts and components to ensure compliance with OEM specifications and manufacturer tolerances., • Maintain and support facility and utility systems including HVAC, boilers, steam lines, plumbing, electrical systems, and building infrastructure., • Coordinate maintenance, repair, and installation work to minimize disruption to production operations., • Ensure compliance with all safety, quality, GMP, and regulatory requirements, including maintaining clean tools, equipment, and work areas., • Ensure production lines are clear of tools and equipment prior to startup or restart following maintenance activities., • Accurately complete work orders, logs, and documentation using the EFCO work order ticketing system., • Document materials and parts used and communicate needs to Maintenance Leadership., • Participate in training and support Maintenance and Production teams as needed to meet business demands., • Promptly report unusual conditions, safety concerns, or actual or potential facility damage. REQUIRED SKILLS & QUALIFICATIONS, • Working knowledge of mechanical, electrical, pneumatic, and basic control systems in a manufacturing environment., • Ability to safely troubleshoot and repair production and facility equipment, including conveyors, pumps, motors, gearboxes, and packaging machinery., • Basic understanding of industrial electrical systems, including low‑voltage (sensors, photo eyes, relays) and high‑voltage systems (motors, panels, disconnects)., • Experience performing preventive maintenance and lubrication activities., • Basic knowledge of HVAC systems, boilers, steam lines, and plant utilities., • Ability to safely disassemble, inspect, adjust, and reassemble machinery and equipment., • Basic welding, fabrication, and hand‑tool skills appropriate for maintenance work., • Ability to read, understand, and follow work orders, safety instructions, and standard operating procedures., • Ability to communicate effectively with Maintenance and Production personnel., • Ability to work independently with minimal supervision while following defined escalation processes., • Ability to safely operate tools, testing devices, diagnostic equipment, and forklifts when trained and certified. Physical & Work Environment Requirements, • Ability to stand or walk for the duration of the shift and work in cold or freezer environments as required., • Ability to bend, crouch, kneel, reach, stoop, and frequently lift up to 50 pounds., • Physical strength, stamina, and dexterity to safely perform essential job functions. You should be proficient in: • PLC Troubleshooting Skills, • Industrial and Manufacturing Engineering, • CNC Machine Repair, • Boiler Troubleshooting, • Industrial Electrical Experience, • Industrial Electrical Systems, • Troubleshooting CNC Machines Machines & technologies you'll use: • Circular Saw, • Coordinate Measuring Machine (CMM), • Conveyor Systems

We are seeking a skilled and reliable Boiler Technician to join our maintenance team in a fast-paced food manufacturing facility. This role is responsible for ensuring the safe and efficient operation of boiler systems that support production. The ideal candidate is detail-oriented, safety-focused, and experienced in maintaining industrial steam systems. • Operate, monitor, and maintain boilers and steam systems to ensure optimal performance, • Perform routine inspections, preventive maintenance, and repairs on boilers, pumps, valves, and piping systems, • Troubleshoot mechanical and basic electrical issues related to boiler operations, • Monitor system readings including pressure, temperature, and fuel usage, • Maintain proper water treatment and chemical levels, • Respond quickly to alarms, malfunctions, or emergencies, • Work closely with production teams to ensure uninterrupted steam supply, • Maintain accurate logs, reports, and maintenance records, • Support installation and upgrades of boiler and utility systems, • Follow all GMP (Good Manufacturing Practices) and food safety standards, • Ensure operations do not impact product safety or quality, • Maintain a clean and organized work environment, • Participate in audits as needed, • High school diploma or GED required, • Technical training or certification in boiler operation preferred, • 2+ years of experience with industrial boilers (food manufacturing experience a plus), • Boiler Operator License (preferred), • Strong knowledge of steam systems and mechanical equipment, • Basic electrical troubleshooting skills, • Ability to read and interpret schematics and technical manuals, • Strong problem-solving and attention to detail, • Ability to work independently and as part of a team, • Competitive pay (based on experience), • Stable, full-time position in a growing company, • Opportunity for advancement, • Team-oriented work environment If youre a dependable technician who takes pride in keeping critical systems running safely and efficiently, we want to hear from you. Compensation details: 34-38 Hourly Wage PI013453dd7855-26289-40447711

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs. Demonstrating a willingness to help others and be a team member Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services. Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company. Provide voice of Customer feedback. Through service and Customer relationships, build brand dedication. Conduct travel and work in a safe manner, constantly learning new technology and soft skills. Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues. Effectively understand and use the Salesforce Lightning Customer Support computer system. Qualifications & Competencies: Proficient verbal and written communication and Customer relation skills. Able to interact and effectively communicate in person and over the phone with customer and co-workers. Present a professional image. Must be adaptable to changes and able to deal with change, delays, or general work-related issues. Basic digital literacy and shown understanding of MS Word, Excel, and Outlook. Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.). Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus. Basic mechanical and logical solving skills are a must. Rational decision making and problem-solving skills. Work Environment Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: Perform related duties as required The duties listed above are intended only as illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. What’s in it for You: We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: Competitive starting salary Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance 3+ Weeks’ Vacation to Start 10 Company Paid Holidays 401(k) retirement plan with company contribution Tuition reimbursement Employee appreciation events and perks Employee Assistance Program Mental and Physical Requirements: The physical demands and characteristics of the work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Must be highly mobile, able to access all areas of the premises. Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. Ability to sit for prolonged period of times. Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. Ability to frequently use hands and arms. Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Ability to work responsibly and professionally in dynamic job sites that may involve tight timelines, changing priorities, and interaction with customers and team members. Certain positions are designated as safety-sensitive due to the nature of the work performed. Employees in these roles may also be expected to: Ability to stand, walk, bend, kneel, crouch, climb, and reach for extended periods while servicing equipment. Ability to work in tight spaces or awkward positions, including accessing equipment interiors and elevated areas. Strong hand–eye coordination and fine motor skills required for precise electrical, mechanical, and diagnostic work. Ability to work in industrial environments, with exposure to noise, lubricants, coolants, metal chips, and other manufacturing conditions, while consistently wearing required personal protective equipment (PPE). Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #: 1442B, Poughkeepsie NY

Industrial Maintenance Mechanic Job Duties: Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instr

We want to see you thrive in challenging work environments that bring you excitement and prosperity in your career! Apply Now! Seeking an exciting and prosperous career path? Look no further! Apply now to join our team and take the first step towards an amazing career journey! WORKING MAINTENANCE SU

This position will share the responsibility for upkeep and maintenance on the fleet of over 800 trucks, tractors, trailers and dollies.

The Journeyman Electrician/Foreman is a full-time position responsible for leading electrical installations, service work, and project execution in commercial and industrial environments. Minimum of 3 years of commercial and/or industrial electrical field experience. Commercial and industrial electr

Support chamber cleans, target changes, pump maintenance, and wafer recovery. Complete maintenance documentation and shift pass-downs. Semiconductor equipment maintenance involving vacuum chambers, pumps, robotics, or gas delivery.

Rooter Plumbing Of Poughkeepsie.Are you looking for more freedom? More Money? More benefits? At Mr.Rooter Plumbing of Poughkeepsie, we pride ourselves on providing a great work environment that allows our technicians the freedom to work their own calls, take home their vans, and interact with custom

Highway Maintenance Worker 1: Satisfactory completion of the Highway Maintenance Worker Traineeship 2 or one year of experience in the operation of highway construction, maintenance equipment, or other vehicles in excess of 26,000 Gross Vehicle Weight Rating with air brakes and possession of a Class

A leading semiconductor manufacturer is expanding its equipment-maintenance team. Perform or support preventive and corrective equipment maintenance. Support chamber cleans, target changes, pump maintenance, and wafer recovery.

Highway Maintenance Worker 1: Satisfactory completion of the Highway Maintenance Worker Traineeship 2 or one year of experience in the operation of highway construction, maintenance equipment, or other vehicles in excess of 26,000 Gross Vehicle Weight Rating with air brakes and possession of a Class

Support chamber cleans, target changes, pump maintenance, and wafer recovery. Complete maintenance documentation and shift pass-downs. Semiconductor equipment maintenance involving vacuum chambers, pumps, robotics, or gas delivery.

Valvoline - - Responsibilities: Perform preventative maintenance tasks on all equipment; Maintain and safeguard all hand and power tools; Maintain company vehicle and contents; Perform basic electrical tasks (outlets, light fixtures, lighting); Perform basic plumbing tasks (faucets, sinks, toilets)

The Journeyman Electrician/Foreman is a full-time position responsible for leading electrical installations, service work, and project execution in commercial and industrial environments. Minimum of 3 years of commercial and/or industrial electrical field experience. Commercial and industrial electr

E-Bike Mechanic performs preventive maintenance and skilled repairs Electric Cargo Bikes. Performs equipment failure analysis to complete preventive and unscheduled maintenance. Logs equipment modifications and maintenance details in the designated system.

Performs maintenance and repairs resulting from normal preventive maintenance inspections. Conducts visual and auditory vehicle inspections, road calls and road tests before and after maintenance and repairs; annotates vehicle problems on work orders.

Equipment Maintenance Technician. A leading semiconductor manufacturer is expanding its equipment-maintenance team. Perform or support preventive and corrective equipment maintenance.

The Electrician will perform installation, testing, maintenance, and repair of electrical systems and equipment in commercial, industrial, and critical facility environments. Day-to-day work includes diagnosing electrical issues, conducting troubleshooting and preventive maintenance, supporting emer

A leading semiconductor manufacturer is expanding its equipment-maintenance team. Perform or support preventive and corrective equipment maintenance. Support chamber cleans, target changes, pump maintenance, and wafer recovery.

Electrical Mechanic – 5+ Years Experience.We’re looking for experienced Electrical Mechanics with 5+ years of commercial electrical experience who can step onto a job site and get to work.This is a hands-on role for someone who knows their trade, works efficiently, and takes pride in doing quali

Our OneSource business model provides clients with a single source for the design, installation and maintenance of large / complex Audio Visual, Communications, PoE Lighting and Electronic Security Systems.

Lead Electrical Mechanic – 10+ Years Experience.Read on to fully understand what this job requires in terms of skills and experience If you are a good match, make an application.We’re looking for an experienced Lead Electrical Mechanic with 10+ years of commercial electrical experience who can l

As a Swan Field Service Technician, you will be responsible for on-site installation, maintenance, troubleshooting, and repair of our instruments, as well as competitors, providing outstanding technical support to our valued customers. Conduct routine preventive maintenance activities to ensure inst

In this role, you will perform installation, troubleshooting, repair and preventative maintenance on electrical distribution equipment. Execute startup, commissioning, maintenance, testing, troubleshooting, and repair activities on electrical power distribution equipment. Experience commissioning, m

Perform repairs, adjustments, and maintenance on equipment and operating systems. Minimum 2 years of experience performing repair and maintenance on vehicles, equipment, or related components. Good mechanical aptitude and knowledge of vehicle maintenance and repair.

The Field Service Technician is responsible for inspecting, updating, and installing company product at the customer site on an as needed basis.They will assist in maintaining solid customer relations through quality installations, excellent customer service, and superb problem-solving skills.They w

Work tasks include inspecting testing, troubleshooting, repairing, overhauling, modifying, and performing general maintenance of complex alternating/direct current (AC/DC) electrical and electronic equipment such as motors, transformers, generators, switches, sensors, control panels, variable freque

Electrical Maintenance Manater job duties: Accomplishes electrical maintenance human resource objectives by recruiting, selecting, orienting, training, assigning, scheduling, coaching, counseling, and disciplining employees; communicating job expectations; planning, monitoring, appraising, and revie

Hyde Park, NY (+Farm+Ln+Hyde+Park+NY+USA+12538-3910) • Property Maintenance. What You’ll Bring as a Maintenance Supervisor. As a Maintenance Supervisor at Conifer Realty, you’ll:.

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.Primary Responsibilities: Must be able to meet or exceed the requirement of the project through manual fabricat