Industrial maintenance jobs in Columbia, South CarolinaCreate job alerts

Job Description HEAVY EQUIPMENT OPERATOR (GENERAL) Duties and Responsibilities of a Heavy Equipment Operator • Provide support to successful completion of construction and engineering work, • Operate all heavy equipment like excavators, earth movers, bulldozers, front-end loaders, and other related equipment., • Perform clearing, grubbing, excavating, compacting, rough grading, and fine grading operations using the available equipment., • Operate heavy equipment safely and carefully, especially on crowded job-sites, • Perform periodic safety, maintenance or servicing checks to ensure proper functioning of the equipment., • Perform minor repair work on-site, • Inform and advise the management or repairmen for major repairs or maintenance, • Drive and control the equipment, • Perform road work, excavation work, lifting work, etc., • Respond to signals and directions by the staff and work in coordination with them, • Maintain proper coordination and cooperation with the road and transport system while driving/working, so that the normal activities are not disrupted., • Operate the equipment manually and also through the use of electronic, GPS, or technical methods of operation., • Work in adherence to safe practices, procedures, work site or traffic laws., • Report to the superintendent and follow instructions A heavy equipment operator must possess knowledge to perform his/her job satisfactorily. The essential criteria must include the knowledge of: • Heavy equipment operation, • Maintenance and repair of heavy and power-driven equipment, • New methods and techniques of operation and the parts of the equipment, • Workplace safety practices, • Dozer: Clearing and Grading - 3 years, • Excavator/Backhoe - 3 years, • Earthmover, Scraper - 2 years, • Motor grader - 3 years, • Must have physical ability to stand strenuous and dangerous work environmental, • Possess physical strength to operate heavy and power-driven equipment for extended periods of time, • Able to lift and carry up to 50 lbs routinely, • Able to safely climb on and off large pieces of equipment, • Able to work in teams, • Able to communicate and interact both verbally and written, • A keen eye to details and good decision making skills, • Manage to handle emergency situations, work pressure and stress, • Able to complete work projects on time and in an effective manner, • Possess problem solving skills, • Honest and trustworthy, • Can work independently with minimal supervision, • Good interpersonal skills, • Flexible to work during odd hours and to work more than 40 hours per week Company DescriptionRichardson Construction Co. has been moving dirt since 1971. We are a small company that accomplishes big things! We perform commercial/industrial sitework and mass grading jobs throughout South Carolina and in parts of North Carolina and Georgia.Richardson Construction Co. has been moving dirt since 1971. We are a small company that accomplishes big things! We perform commercial/industrial sitework and mass grading jobs throughout South Carolina and in parts of North Carolina and Georgia.

Job Description NICET II Fire Alarm Technician – U.S. Army base Fort JacksonCompetitive Wages and an INSURANCE ALLOWANCE! Top reasons to work at EMI Services, a subsidiary of TechFlow: • Health Care Plan - Medical, Dental & Vision, • Paid Time Off - Vacation, Sick & Federal Holidays Fire Alarm Technicians on the Fort Jackson team come from all areas of Columbia, South Carolina. The primary responsibility of the Fire Alarm Technician is to install, test, maintain and repair fire safety and security systems, such as fire alarms and suppression systems. The Fire Alarm Technician performs inspections, test alarms, troubleshoot or document any issues, and responds to emergency service calls. The ideal EMI Fire Alarm Technician must be NICET II Certified and experienced in both residential and industrial/commercial facilities. Salary Starting at $30.04/hr. (DOE) plus $4.93 fringe benefits used towards insurance and 401k! See ALL the fantastic benefits you receive as an employee of EMI below!! Key Responsibilities • Install or upgrade fire alarms, • Test and repair alarm systems already in place, • Perform inspections to ensure alarms are installed according to code, • Complete detailed inspection reports, • document any issues, • Provide preliminary cost estimates for materials and services, • Maintain current license and identification to meet government regulations, • Respond to emergency service calls, • Perform other related duties as assigned Essential Skills • Knowledge of applicable state and federal laws and building codes and regulations, • Proficiency in the use of test equipment, • multi-meters and digital analyzers, • Knowledge of all fire safety codes and regulations, • Able to read and understand installation manuals, • Adaptable and flexible in work situations, • Prioritizes tasks to ensure completion in a timely manner., • PRACTICES WORKPLACE SAFETY in the use of tools, equipment, and supplies used in repair of HVAC equipment., • Including proper use of personal protective equipment (PPE) Requirements • High school diploma or equivalent, • 3+ years of experience- MUST include industrial or commercial facilities, • NICET II certification, • Working knowledge of NFPA standards (including 70 and 72), • Valid driver’s license compliant with REAL ID Act or are you willing and able to obtain one, • Pass a pre-employment drug screening and back ground check, • Regular, dependable attendance, • U.S citizenship to obtain and maintain access to military installations Physical Requirements • Must be able to lift up to 50lbs unassisted, • Use of hands, reaching with hands and arms, talking, and walking, • Prolonged periods of sitting, bending, squatting, standing, twisting, or stooping, • Climbing ladders and entering confined spaces - frequently work on ladders and scaffolds, • May spend long hours outside and in awkward positions which can cause physical discomfort and strain - may stand for long periods, • Electricians risk injury from electrical shock, falls, and cuts, • Work both indoors and outdoors in various temperatures (some extreme) and weather conditions *Physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Click here to follow EMI Services on Facebook Benefits As a team member at EMI, you’ll enjoy: • Generous benefits package consistent with the Service Contract Act, • Insurance Allowance, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Employee Stock Ownership Plan (ESOP), • Company Vehicle for Local Commute, • Paid Time Off (Vacation, Sick & Federal Holidays), • Short Term and Long Term Disability, • Term Life Insurance, • Safety Allowance, • Uniforms, • Tuition Reimbursement, • Non-seasonal- always steady work!, • Referral program- Join our team then bring your friends What Sets EMI Apart EMI is an industry-leading provider of DOD base operation support services, facilities maintenance, and logistics. Our goal is to contribute to the repair and maintenance of buildings and equipment. EMI consistently delivers cost-saving through best value innovations and quality service that exceeds our clients’ expectations. The Right Partner: EMI has grown by gaining our customers’ trust and our employees’ loyalty. We’ve successfully performed over 60 service contracts and we understand the unique challenges facing today’s military. We offer exceptional responsiveness and a strong commitment to customer satisfaction. We demonstrate this commitment by consistently earning some of the highest customer satisfaction ratings in the industry. The Right Team: The EMI team includes over 250 high-achieving professionals, administrative and trades personnel deployed in various locations throughout the United States. At times, we augment our in-house capabilities with proven and capable business partners. The Right Approach: EMI brings vast expertise and proven solutions to augment our clients’ operations. We provide a platform that delivers seamless mission support and exceptional customer service in a very cost-effective and repeatable solution. #emiservices

Job Description Summary of Primary Functions: Dobbs Equipment is seeking an experienced Shop Service Technician. Technicians are responsible for the repair, diagnosis, overhaul, and reconditioning maintenance of customer and company heavy equipment and components. Depending on the location and assignment, the technician will be responsible for some, or all the functions and duties listed below. These repairs may require working hours in addition to the normal work schedule for emergency calls or routine service as required. This job description does not include a complete listing of all the duties and functions of the position. Management reserves the right to assign other duties or projects as necessary. Essential Functions and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. (Other duties may be assigned) • Follow all safety rules and regulations in performing work assignments while maintaining a safe work environment and safe work habits., • Recondition, repair, service, and assemble any machines/industrial equipment., • Diagnose problems and determine what repairs are needed., • Perform any inspections as required., • Check and report any shortages and malfunctions to the Service Manager., • Maintain records and account for all time, parts, and supplies used in repairing and servicing both customer and dealership equipment., • Handle customer problems both objectively and tactfully., • Assist in directing work of helpers or on the job trainees and provide instructions as required., • Complete dis-assembly and inspection, as efficiently as possible, so parts may be ordered, and machine work can be scheduled promptly., • Perform all service tasks as assigned by the Service Manager, Supervisor, or Shop Foreman., • Prepare all reports and forms required in conjunction with job assignments., • Report to Service Manager any additional work required to ensure proper operation and safety of equipment., • Participate in service training programs required for development of skills and knowledge., • Maintain a clean work area and perform work in a neat and orderly fashion., • Bring to the attention of the Service Manager any shop tools, equipment or vehicle that is not in a serviceable condition or is unsafe to use., • Represent the dealership as a professional Service Technician at all times., • Operate trucks and equipment with extreme care and caution., • Maintain and care for shop tools, equipment, vehicles, and other employee’s belongings., • Reports to work on time, as scheduled., • Ability to work up to 12-hour days, varying shifts, weekends, and holidays as needed., • Ability to operate company vehicles and follow all motor vehicle state safety laws (if necessary)., • All employees are expected to adhere to the safety policies of Dobbs Equipment and the clients for whom we work., • Following the safety policies of Dobbs is a condition of employment and is everyone’s responsibility. Qualification: The requirements listed below represent the knowledge, skill, and/or ability required. • Valid Driver’s License and maintain a clean driving record., • Knowledge of industrial equipment maintenance and operation., • Ability to perform basic repairs and required maintenance using special tools and equipment following Technical Manual procedures, • Ability to operate heavy equipment safely around shop. Education, Skill, and/or Experience Requirements: • Associate degree or equivalent from two-year college or technical school or a minimum of 2 years related experience and/or equivalent combination (preferred)., • Stay current with technical changes., • Proficient knowledge of mechanical, electrical, and hydraulic systems., • Maintains current product knowledge of John Deere and competitive products., • Forklift Certification (preferred)., • Ability to communicate effectively with teammates., • Strong problem-solving skills., • Excellent time management skills., • Must be able to self-manage/self-motivate., • Flexible schedule (sometimes weekends or overtime)., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals., • Ability to write diagnosis and work completed on routine reports and correspondence., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Develop skills in disassembly, assembly and repair of components and machines., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Quick learner with the ability to think out of the box., • Overnight travel less than 5% (Training)., • Bilingual a plus. Work Environment: While performing the functions of this job, the employee regularly works in a service shop setting and is exposed to frequently changing temperatures, wet or humid conditions, noise, vibration, fumes, odors, dust, and close proximity to moving mechanical parts. Physical Demands: The physical demands described here represent those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is continuously required to: • Ability to work using Personal Protective Equipment, including respirators, welding shields, hard hats, vests, safety glasses, goggles, gloves and etc., • Ability to use full range of motion for back, arms, hands, and fingers., • Able to use full range of motion for both legs, including climbing, twisting, squatting, and pushing with both legs., • Able to use hand tools, fuel hoses, lubrication systems on all equipment, • Able to climb onto or down from mobile construction equipment, typically 3-4 feet of climbing, for service and inspection., • The employee is frequently required to lift or carry loads greater than 50 lbs but less than 75 lbs., • Specific vision abilities required by this job include close, distance and color vision., • The employee is regularly required to talk or hear at moderate noise levels. We’re an Equal Employment Opportunity and Affirmative Action Employer Dobbs Equipment is an Equal Employment Opportunity (EEO) and Affirmative Action employer. We are committed to providing an environment free of discrimination, harassment and retaliation both for our employees and applicants. We make all employment related decisions on the basis of an individual’s qualifications and job performance. We recruit, hire, promote, train, transfer, and make compensation decisions without regard to race, religion, color, creed, national origin, ancestry or citizenship status, sex, sexual orientation, gender, genetic information, marital status, pregnancy status, age, disability, protected veteran status, or any other characteristic protected by federal, state or local law. Notice to Applicants: We participate in E-Verify in the United States. Drug Free and Alcohol-Free Workplace Notice. Dobbs Equipment is an Equal Opportunity and At-Will Employer.

Job DescriptionFlux Core Welders / FittersUp to $30/hr Job Description Candidates must have 3G flux core welding, fitting, and arc gouging experience. This is a Direct Hire position. MUST Have Skills • Flux core - minimum 2 years, • Structural fitting - minimum 2 year, • Monday - Friday, • Schedule is either 5x10hrs or 4x12hrs, • 1st | 6am - 4pm or 6pm, • 3rd | 4pm - 2am or 6pm - 6am, • 7% shift differential for 2nd shift, • 90-day performance evaluation with potential for wage increase have medical and dental and 401K contributions - starts the first of the month after they are hired - direct placement opportunity Workplace Type This is a fully onsite position in Columbia,SC. Application Deadline This position is anticipated to close on Dec 24, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDescription️ Seize the Opportunity: As a Senior Technician, You're Not Just Fixing Equipment—You're Powering Industry, Mentoring Talent, & Driving Excellence. ⚙️ Why WMH? Because Your Career Deserves More! At WMH (), we don’t just offer jobs—we build unstoppable careers. With over 35 years of industry excellence, we’ve grown into the Southeast’s fastest-growing material handling leader, with 11 locations across NC, SC, TN, VA, GA & AL—and we’re just getting started. We operate on honor, integrity, and a relentless drive for excellence. Your success is our mission, which is why we invest in training, mentorship, and leadership development to accelerate your career. What sets us apart? We’re not just another dealership—we’re redefining the industry as a full-scale solutions provider, delivering cutting-edge automation, fleet technology, and next-level innovation that keeps businesses moving forward. When you join WMH, you’re stepping into a future filled with opportunity, advancement, and impact—because here, your career moves forward. WMH is seeking a Senior Mechanic/Technician to join our elite team. As a Senior Mechanic/Technician, you’ll play a critical role in ensuring peak performance, taking charge of advanced diagnostics, precision repairs, and proactive maintenance on cutting-edge equipment. But this role is more than just turning wrenches—it’s about leading by example, optimizing performance, and mentoring the next generation of skilled technicians. Your expertise will fuel operational success, maximize uptime, and push industry standards forward while fostering a team-driven culture of excellence. At WMH, we don’t just fix equipment—we keep industries moving, develop top-tier talent, and set the gold standard for reliability and innovation in material handling.️ Your Mission? To be the driving force behind operational excellence, delivering advanced diagnostics, expert-level repairs, and proactive maintenance that maximizes uptime and efficiency. You'll play a critical role in ensuring peak performance for our clients while leading, mentoring, and developing the next wave of skilled technicians. At WMH, your experience isn’t just valued—it’s the foundation for the future. Key ResponsibilitiesIndependence & Field Expertise ✅ Hit the Road: Start your workday from home, servicing customers on-site in a company-provided van with the latest tools & diagnostic technology. ✅ Own Your Territory: Maintain and repair forklifts, heavy machinery, and material handling equipment across warehousing, distribution, and manufacturing industries. ✅ Be the Expert in the Field: Deliver on-site service with speed, accuracy, and professionalism—our customers rely on you! Advanced Diagnostics & Repairs✅ Troubleshoot Like a Pro – Diagnose complex mechanical, hydraulic, and electrical issues with precision and efficiency. ✅ Fix it Right, The First Time – Execute top-quality repairs & preventive maintenance to maximize uptime & minimize breakdowns. ✅ Own the Fleet – Maintain WMH and customer equipment at peak performance through scheduled maintenance, inspections, and safety checks. Lead & Mentor the Next Generation️‍✅ Train & Develop Junior Techs – Share your expertise, foster a culture of excellence, and guide the next generation of mechanics. ✅ Be a Leader – Set the gold standard in service, helping newer technicians refine their skills and elevate their careers. Customer Engagement & Service Excellence✅ Deliver Outstanding Customer Support – Work closely with clients, providing expert consultation, service recommendations, and technical solutions. ✅ Customer-Focused Communication – Keep customers informed about service updates, repairs, and proactive maintenance. Documentation & Compliance️ ✅ Precision Documentation – Maintain accurate service reports, repair logs, and work orders to ensure seamless operations. ✅ Safety & Compliance First – Uphold OSHA standards, industry regulations, and best practices to keep work environments safe and efficient. The Field: • Diverse job sites., • Weather-ready – wet, humid, hot, or cold. ✔ Technical Expertise: Advanced knowledge of diesel engines, hydraulics, electrical systems, and industrial machinery. ✔ Certifications: ASE Certification (preferred) in brakes, electrical, diesel, and preventative maintenance. Forklift certification a plus! ✔ Mechanical & Electrical Skills: Ability to diagnose, troubleshoot, repair, and maintain complex industrial equipment. ✔ Industry Knowledge: Familiarity with OSHA regulations, equipment compliance, and workplace safety standards. ✔ Problem-Solving Mindset: Strong troubleshooting and critical-thinking skills to resolve issues efficiently. ✔ Leadership & Mentorship: Proven ability to train, coach, and guide junior technicians. ✔ Customer Service Excellence: Outstanding communication and relationship-building skills. ✔ Technical Proficiency: Experience with diagnostic software, schematics, Microsoft Office, digital work platforms, & fleet management systems. ✔ Work Ethic & Drive: Self-motivated, detail-oriented, and results-driven. ✔ Physical Requirements: Ability to lift 50+ lbs, work in various conditions, and travel within assigned territory. ✔ Valid Driver’s License: Required for company van usage. Perks of Being a WMH Team Member:Premium Health Coverage – Your well-being matters! We offer premium medical, dental, and vision insurance with HSA & PPO options + company-paid AD&D & life insurance (with additional coverage available). Exclusive Training & Career Growth – Gain cutting-edge technical skills with our OEM-exclusive and in-house training programs. We invest in your growth, leadership, and future success. Time to Recharge – Enjoy a generous PTO plan + paid holidays so you can rest, recharge, and spend time with loved ones. Competitive pay & performance-Based Incentives -Earn what you're worth! 100% of your travel time is paid—no flat rates. ️ Tool Allowance (Paid Quarterly!) – Keep your gear in top condition with regular tool reimbursements. Uniforms Provided & Laundered Weekly – Look sharp on the job without the hassle! ️‍ PPE & Safety Shoe Allowance – We’ve got you covered with protective gear and workwear support. Stay Connected – Get a monthly cell phone allowance to ensure you have the tools to communicate effectively. Company Van, Tablet & Fuel Card – Take your fully-equipped van home and work within your service area with ease. Secure Your Future – 401(k) match up to 9% + profit-sharing benefits to help you build long-term financial success. Unmatched Job Stability in a Booming Industry – Material handling is the backbone of logistics, warehousing, and supply chains. Your skills will always be in demand. ⚖️ Work-Life Balance That Works for You – We know flexibility matters, and we offer schedules that support a thriving career and personal life. Ongoing Professional Development – We invest in your success with mentorship, leadership training, skill-building opportunities & career advancement opportunities. Be Part of Something Bigger – At WMH, you're not just another employee—you’re a key player in an industry that keeps the world moving. Your Cue: Take the Wheel of Your Future! This isn’t just another job—it’s your chance to be part of a powerhouse team that’s revolutionizing the industry and redefining careers. At WMH, we don’t just keep businesses moving—we propel careers to new heights. Don’t wait. Don’t watch. Be part of something BIG, something BOLD, something that makes you excited to jump out of bed every morning! The future is calling—ignite yours today! Apply now.

Job Description CANDIDATES WITH DIESEL TECHNICIAN / HEAVY EQUIPMENT REPAIR / AG OR CONSTRUCTION EQUIPMENT MECHANIC EXPERIENCE ARE ENCOURAGED TO APPLY! These are permanent positions with great pay, benefits and opportunity for advancement. • Will be trained in the repair and maintenance of Industrial, AG and Heavy Equipment equipment., • Ability to effectively evaluate mechanical and/or electrical equipment, recommend and perform appropriate, cost-effective, quality repairs and maintenance, required., • Straight, competitive hourly pay - no flat rate!, • Ability to communicate effectively and professionally., • Knowledge of gas/diesel/LP engines, batteries, fuel systems, hydraulics, pneumatics and electrical are a plus., • Ability to read schematics, maps, blueprints and manuals., • PC literate and great customer service skills., • Ability to lift 75 pounds

Job Description Summary of Primary Functions: Dobbs Equipment is seeking an experienced Field Service Technician. Technicians are responsible for the repair, diagnosis, overhaul, and reconditioning maintenance of customer and company heavy equipment and components. Depending on the location and assignment, the technician will be responsible for some, or all the functions and duties listed below. These repairs may require working hours in addition to the normal work schedule for emergency calls or routine service as required. This job description does not include a complete listing of all the duties and functions of the position. Management reserves the right to assign other duties or projects as necessary. Essential Functions and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. (Other duties may be assigned) • Follow all safety rules and regulations in performing work assignments while maintaining a safe work environment and safe work habits., • Reads job order and observes and listens to equipment in operation to determine malfunction and plans work procedures., • Installs fuel injection nozzles and pumps, changes, or recharges batteries, and replaces transmissions, hydraulic systems, and component parts., • Examines protective guards, loose bolts, and specified safety devices on equipment, and makes adjustments., • Check and report any shortages and malfunctions to the Service Manager., • Lubricates moving parts and drives repaired equipment to verify conformance to specifications., • Fabricates special lifting or towing attachments, hydraulic systems, shields, or other devices according to blueprints or schematic drawings., • Removes, replaces, and repairs tires, undercarriages, and earth moving and timber harvesting attachments., • Maintain records and account for all time, parts, work orders and supplies used in repairing and servicing both customer and dealership equipment., • Report to Service Manager any additional work required to ensure proper operation and safety of equipment., • Maintains and cares for the shop tools and equipment., • Ensures work is performed safely and safe work procedures are followed throughout the department., • Reads schematics demoting operating specifications for unit or component and type of evaluation required., • Continues to work on revenue producing work as needed., • Tests unit for conformance with operating requirements such as specified horsepower and lifting performance., • Helps ensure that our new and used whole goods are in good working conditions., • Maintains assigned service vehicle in areas of cleanliness, daily maintenance, and inspections., • Participate in service training programs required for development of skills and knowledge., • Represent the dealership as a professional Service Technician at all times., • Reports to work on time, as scheduled., • Ability to work up to 12-hour days, varying shifts, weekends, and holidays as needed., • Ability to operate company vehicles and follow all motor vehicle state safety laws, • All employees are expected to adhere to the safety policies of Dobbs Equipment and the clients for whom we work., • Following the safety policies of Dobbs is a condition of employment and is everyone’s responsibility. Qualification: The requirements listed below represent the knowledge, skill, and/or ability required. • Valid Driver’s License and maintain a clean driving record., • Knowledge of industrial equipment maintenance and operation., • Ability to perform basic repairs and required maintenance using special tools and equipment following Technical Manual procedures, • Ability to operate heavy equipment safely. Education, Skill, and/or Experience Requirements: • Associate degree or equivalent from two-year college or technical school or a minimum of 2 years related experience and/or equivalent combination (preferred)., • Stay current with technical changes., • Proficient knowledge of mechanical, electrical, and hydraulic systems., • Maintains current product knowledge of John Deere and competitive products., • Forklift Certification (preferred)., • Ability to communicate effectively with teammates., • Strong problem-solving skills., • Excellent time management skills., • Must be able to self-manage/self-motivate., • Flexible schedule (sometimes weekends or overtime)., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals., • Ability to write diagnosis and work completed on routine reports and correspondence., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Develop skills in disassembly, assembly and repair of components and machines., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Quick learner with the ability to think out of the box., • Overnight travel less than 5% (Training)., • Bilingual a plus. Work Environment: While performing the functions of this job, the employee regularly works in a service field setting and is exposed to frequently changing temperatures, wet or humid conditions, noise, vibration, fumes, odors, dust, and close proximity to moving mechanical parts. Physical Demands: The physical demands described here represent those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is continuously required to: • Ability to work using Personal Protective Equipment, including respirators, welding shields, hard hats, vests, safety glasses, goggles, gloves and etc., • Ability to use full range of motion for back, arms, hands, and fingers., • Able to use full range of motion for both legs, including climbing, twisting, squatting, and pushing with both legs., • Able to use hand tools, fuel hoses, lubrication systems on all equipment, • Able to climb onto or down from mobile construction equipment, typically 3-4 feet of climbing, for service and inspection., • The employee is frequently required to lift or carry loads greater than 50 lbs but less than 75 lbs., • Specific vision abilities required by this job include close, distance and color vision., • The employee is regularly required to talk or hear at moderate noise levels. We’re an Equal Employment Opportunity and Affirmative Action Employer Dobbs Equipment is an Equal Employment Opportunity (EEO) and Affirmative Action employer. We are committed to providing an environment free of discrimination, harassment and retaliation both for our employees and applicants. We make all employment related decisions on the basis of an individual’s qualifications and job performance. We recruit, hire, promote, train, transfer, and make compensation decisions without regard to race, religion, color, creed, national origin, ancestry or citizenship status, sex, sexual orientation, gender, genetic information, marital status, pregnancy status, age, disability, protected veteran status, or any other characteristic protected by federal, state or local law. Notice to Applicants: We participate in E-Verify in the United States. Drug Free and Alcohol-Free Workplace Notice. Dobbs Equipment is an Equal Opportunity and At-Will Employer.

Job DescriptionStep into Steelmaking You clock in, gear up with PPE, and walk the melt area with a sharp eye. You note anything that looks off, complete the pre-shift equipment checks, and sync with teammates on the plan for the day. When maintenance needs an extra set of hands, you’re there. When operations support calls out a priority, you execute safely and on time. That’s a day in the life of a Steel Melt Operations Apprentice at CMC—learning fast, staying alert, and growing into a long-term career. How You’ll Contribute • Jump in alongside maintenance technicians when requested., • Champion safety every minute: follow procedures and consistently wear company PPE., • Spot hazards early and report them immediately., • Communicate clearly about production concerns, issues, and resource needs., • Complete and submit equipment inspection reports each shift., • Carry out assignments from operations support safely and on schedule., • Handle routine/minor maintenance or repairs independently when appropriate., • Offer ideas that improve methods and procedures—continuous improvement matters., • Own housekeeping for your area and contribute to overall facility cleanliness., • Troubleshoot problems using your knowledge, experience, and teamwork., • Know start-up, shut-down, and emergency procedures. What It Takes, • Team-first mindset in a fast-paced environment, with strong work ethic, attention to detail, and solid organization., • Comfort working around heat/cold extremes, chemicals, dust, fumes and mists, uneven walking surfaces, loud noise, elevated areas, and confined spaces., • Basic computer skills., • Reliable attendance, timely work completion, and flexibility to meet business needs., • A quick learner who can manage multiple tasks., • Able to lift up to 50 lbs., • Willingness to work some overtime., • Woodworking, • Troubleshooting Industrial Automation Equipment, • Automotive Repair, • Crane Operation, • Mechanical Assembly Skills, • Meets Physical Requirements Tools and Technologies You May Work With, • CNC Mill (3-4 axis VMC), • Diesel engine, • Crane, • CNC Lathe (2-4 axis), • CNC Mill (5+ axis VMC) Ready to build your future from the inside out? Apply online today.

Job DescriptionDescription: Hiring for projects in Columbia/Lexington Area Position Summary Network Controls and Electric Inc. has an immediate need for an experienced Access Control Technician. The Access Control Technician will install specified card access systems offered by Network Controls to existing and new clientele throughout the Greater Columbia marketplace. Some travel may be required but will be on a case-by-case basis and is generally limited to a maximum of 2 weeks in duration. Position Responsibilities • Install the following hardware:, • Card or Biometric Readers, • Door Contact & Door Position Switches, • Electronic Strike or Mag Locks, • Electronic Latch Retraction Kits, • Associated control cabling when required, • Configure software and set up doors & schedules, • Install any mercury-based control module, • Effectively communicate job status via email or other reporting system, • Interface with customer and assigned Project Manager on production, • Must be proficient in the following systems:, • Mercury-based control panels, • Avigilon ACM, • Genetec Synergis, • Paxton Net 2, Paxton 10, • Axis, • Avigilon ACC 6 or greater, • Valerus, • ExacqVision, • Genetec Omnicast, • Proficiency with computers including Microsoft Office and web-based applications, • Teamwork oriented with mentoring skills and a willingness to help others, • The ability to work with all departments internally, • Strong customer service and organizational skills ABOUT NETWORK CONTROLS & ELECTRIC, LLC At Network Controls, we provide high-quality single-source design, installation, and maintenance of communication networks and technology infrastructure. Team members specialize in niche industries, including office and industrial, educational facilities, healthcare, manufacturing, and the public sector (including military and quasi-government facilities). With project teams in Greenville, South Carolina, Columbia, South Carolina, and Charlotte, North Carolina, we serve companies and organizations throughout the Southeast. Our customers choose us because of our track record. We get the job done right, on time, with no hassle. Our team members are highly certified, with the experience to design and install robust networks and systems for each industry we serve. What We Offer In addition to competitive pay, stable employment and growth opportunities, we offer a variety of benefits as part of our total compensation & rewards package. • Weekly Pay, • 4-day work schedule for our field team members - with Overtime available, as applicable/based on position & project schedules, • Additional Pay for Shift Work, as applicable, • PTO, • Paid Holidays, • Training & Certification Opportunities, • Cross-Training Opportunities, • Employee Appreciation Events, • Company Swag - Apparel, hats & a variety of other items available, • Medical, dental, vision, disability, voluntary life options. Eligible the first of month following date of hire., • 401k Participation & Match, upon meeting eligibility, with 100% immediate vestingRequirements:

Job Description Paint Prep Specialist Reporting To: Paint & Interior Manager Working Hours: Monday – Friday, 7:00 AM – 4:00 PM Work Location: Columbia Metropolitan Airport (KCAE) in West Columbia, SC About Eagle Aviation Eagle Aviation is a premier 24-hour/7 days per week Fixed-Base Operator (FBO) in Columbia, South Carolina, with a rich history of over 55 years in the aviation industry. We specialize in 24-hour/7 days per week line service, maintenance, avionics, aircraft completions, aircraft sales and support services, consistently delivering high-quality solutions tailored to our clients' needs. Our team is driven by a passion for aviation and a dedication to providing exceptional service. Become part of our team and help us continue our legacy of setting new standards in quality and service in the aviation industry. Job Description Eagle Aviation is seeking an Aircraft Paint Prep Specialist to join our team. This role is responsible for preparing aircraft surfaces for painting, ensuring proper adhesion and a high-quality finish. The Paint Prep Specialist will perform chemical stripping, sanding, taping, and surface treatments while maintaining a clean and safe work environment. The ideal candidate is detail-oriented, works well in a team environment, and understands the importance of precision and efficiency in aircraft refinishing. Key Responsibilities: · Prepare aircraft surfaces for painting by taping, sanding, chemically stripping, and treating surfaces. · Follow company policies and safety procedures to ensure compliance and workplace safety. · Maintain and organize paint supplies, tools, and equipment to support efficient operations. · Work with speed and attention to detail to meet project deadlines and quality standards. · Perform visual inspections to ensure surfaces are properly prepped before painting. · Keep the work area clean and organized while adhering to environmental and safety regulations. · Collaborate with the paint and completions team to ensure seamless workflow. · Perform additional duties as assigned by the department. Job Requirements · High school diploma or equivalent required. · Experience in aircraft, automotive, or industrial paint preparation is preferred. · Knowledge of tools and equipment used in paint preparation. · Ability to lift up to 75 lbs, walk, bend, stretch, and climb ladders. · Strong attention to detail and ability to perform surface preparation and visual inspections. · Must be able to work in a team-oriented and fast-paced environment. Compliance · Must be at least 18 years old. · Must be able to pass drug screening and TSA background screening. · Must have a valid Driver’s License with reliable transportation. Benefits Overview Eagle Aviation offers a comprehensive benefits package that includes significant employer contributions toward medical, vision, and basic life insurance coverage for eligible employees. Voluntary options such as dental, short-term and long-term disability, additional life insurance, and flexible spending accounts (with available employer contribution) are also available. Employees can take advantage of a 401(K) plan with employer matching and a generous PTO program. Compensation Competitive wage commensurate with experience. Nothing in this job description restricts managements rights to assign or reassign duties or responsibilities to this job at any time. Company DescriptionEagle Aviation is a premier, full-service FBO centrally located on the eastern seaboard in Columbia, South Carolina, with bases at both the Columbia Metro (KCAE) and Jim Hamilton - L.B. Owens Airport (KCUB). We have been providing aircraft sales and services to aviation clients around the world since 1967, and have worked tirelessly to earn our reputation for excellence. We’ve become a known and trusted name in sales, maintenance, completions, parts support and line service. Regardless of the reason of your visit, you can rest assured that the Eagle Aviation team will provide you with a professional and gratifying customer experience, time and time again. JOIN USEagle Aviation is a premier, full-service FBO centrally located on the eastern seaboard in Columbia, South Carolina, with bases at both the Columbia Metro (KCAE) and Jim Hamilton - L.B. Owens Airport (KCUB). We have been providing aircraft sales and services to aviation clients around the world since 1967, and have worked tirelessly to earn our reputation for excellence. We’ve become a known and trusted name in sales, maintenance, completions, parts support and line service. Regardless of the reason of your visit, you can rest assured that the Eagle Aviation team will provide you with a professional and gratifying customer experience, time and time again. JOIN US

Job DescriptionCompany Description Harsco is recognized for technical leadership and worldwide experience in virtually all major aspects of railway track maintenance. We enable railroads to operate at peak efficiency over smooth, precisely aligned track that increases railway safety while reducing fuel consumption and other key operating costs. Our broad array of equipment and services support every type of railway operator, from major national and international railway systems, to short lines and high-speed urban transit networks. Job Description The QE position will be responsible for ensuring product quality and reliability by designing, implementing, and maintaining quality assurance processes. This role involves collaborating with cross-functional teams to drive root cause problem solving, continuous improvement, implementing best practices, and ensuring compliance with industry standards and regulations.The knowledge and technical competencies for this role could be in any of the following areas: Electrical, mechanical/hydraulic, and machining/fabrication. ESSENTIAL DUTIES AND RESPONSIBILITIES Will include the following, but other duties may be assigned: * Responsible for quality aspects of production projects through the development, build, and test stages. This includes analysis of data, use of problem solving skills, and proper maintenance of project records. * Actively participates in definition of machine test requirements, justification of acceptance limits to assure compliance with requirements. * Manages Work In Progress (WIP) and Operation Acceptance Test (OAT) inspection data and prepares statistical and operational performance reports, as requested by management. * Working with the Continuous Improvement team to perform process capability studies or special studies necessary to increase control and lower total quality costs. * Manages WIP materials traceability and assists with Pre-Check and Factory Acceptance Test (FAT) Vehicle Reporting for our customers. * Coordinates with Engineering to ensure that all ‘redline’ drawings are captured and processed in accordance with the engineering change procedure. * Responsible for updating work instructions and coordinating the maintenance of work instructions for all business departments and relationship to ISO 9001 Quality Management System procedures, as needed. * Reviews and actively comments on drawings, calculations, specifications, and other design inputs/outputs as required. * Provides direction and monitor performance in the development & application of inspection plans: First Article Inspection, In-Process and Final Product Inspection, Sampling Plans, inspection and acceptance criteria and Design Validation Testing. * Performs internal audits to assess compliance to Standards and to the internal Quality System, including investigation, presentation of observations and findings, and reporting. * Applies sound systematic problem-solving methodologies in identifying, prioritizing, communicating, and resolving quality constraints/issues/part problems and openly sharing findings during Gemba Team walks and during project reviews. * Provides “lessons learned” report outs (for example A3/8D) and own” the representation of such” to manage for cooperative enlistment of support. * Provides trending analysis on quality corrective actions/countermeasures and performance metrics, as well as key supplier failure data. * Ownership of supplier part inspection and failure analysis – to drive quality requirements back to the source. (whether design or manufacturing caused) Qualifications * 7-10 yrs. of experience in a heavy industrial manufacturing environment; strong electrical/electronic, mechanic/hydraulic, and/or machining/fabrication experience helpful * 5-7 years in a Quality role preferred * BS degree in Manufacturing Engineering, Mechanical Engineering, Electrical Engineering, or other related engineering discipline or: An AS degree and/or previous experience will be considered in lieu of a BS degree * ASQ CQE, ASQ SSGB certication preferred * Understanding of GD&T and CMM measurement reporting and inspection layout metrology * Proficient in the use of quality tools and practices to establish approval criteria that ensure the identification of quality failures, using consistent appraisal techniques for internal and external manufactured parts and assemblies * Knowledge of custom manufacturing operations including fabrication, welding, machining, assembly, testing, and manufacturing engineering helpful, but not required * Ability to lift 40 lbs KNOWLEDGE AND SKILLS * Ability to read, analyze, and interpret technical data * Must possess good communication skills, both verbal and written * Ability to effectively present information and respond to questions * Must be able to teach required skills comfortably verbally and physically to production assembly staff * Ability to overcome obstacles and pursue alternate methods when required * Ability to work with a diverse group of individuals and extract, lead, and implement improvement ideas * Demonstrated ability to facilitate and partner with cross-functional teams * Must be time-driven, process a strong product development & operations attitude, and exhibit strong project management skills Additional Information We provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status or genetics. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. If you have a difficulty applying for any job posted on Harsco Rail’s website because a disability prevents you from using the online system, Harsco Rail offers the following alternate application procedure: Contact Matt Fink HR Director NoAM at 803-673-8267 and Harsco Rail will arrange for an alternate method of applying and will consider your application together with all other applications received for the job. Please call only for disability application.

Job DescriptionCompany Description Harsco is recognized for technical leadership and worldwide experience in virtually all major aspects of railway track maintenance. We enable railroads to operate at peak efficiency over smooth, precisely aligned track that increases railway safety while reducing fuel consumption and other key operating costs. Our broad array of equipment and services support every type of railway operator, from major national and international railway systems, to short lines and high-speed urban transit networks. Job Description GENERAL POSITION RESPONSIBILITIES The QE position will be responsible for ensuring product quality and reliability by designing, implementing, and maintaining quality assurance processes. This role involves collaborating with cross-functional teams to drive root cause problem solving, continuous improvement, implementing best practices, and ensuring compliance with industry standards and regulations. The knowledge and technical competencies for this role could be in any of the following areas: Electrical, mechanical/hydraulic, and machining/fabrication. ESSENTIAL DUTIES AND RESPONSIBILITIES Will include the following, but other duties may be assigned: • Responsible for quality aspects of production projects through the development, build, and test stages. This includes analysis of data, use of problem-solving skills, and proper maintenance of project records., • Actively participates in definition of machine test requirements, justification of acceptance limits to assure compliance with requirements., • Manages Work In Progress (WIP) and Operation Acceptance Test (OAT) inspection data and prepares statistical and operational performance reports, as requested by management., • Working with the Continuous Improvement team to perform process capability studies or special studies necessary to increase control and lower total quality costs., • Manages WIP materials traceability and assists with Pre-Check and Factory Acceptance Test (FAT) Vehicle Reporting for our customers., • Coordinates with Engineering to ensure that all ‘redline’ drawings are captured and processed in accordance with the engineering change procedure., • Responsible for updating work instructions and coordinating the maintenance of work instructions for all business departments and relationship to ISO 9001 Quality Management System procedures, as needed., • Reviews and actively comments on drawings, calculations, specifications, and other design inputs/outputs as required., • Provides direction and monitor performance in the development & application of inspection plans: First Article Inspection, In-Process and Final Product Inspection, Sampling Plans, inspection and acceptance criteria and Design Validation Testing., • Performs internal audits to assess compliance to Standards and to the internal Quality System, including investigation, presentation of observations and findings, and reporting., • Applies sound systematic problem-solving methodologies in identifying, prioritizing, communicating, and resolving quality constraints/issues/part problems and openly sharing findings during Gemba Team walks and during project reviews., • Provides “lessons learned” report outs (for example A3/8D) and own” the representation of such” to manage for cooperative enlistment of support., • Provides trending analysis on quality corrective actions/countermeasures and performance metrics, as well as key supplier failure data., • Ownership of supplier part inspection and failure analysis – to drive quality requirements back to the source. (whether design or manufacturing caused)Qualifications, • 3-5 years of experience in a heavy industrial manufacturing environment; strong electrical/electronic, mechanic/hydraulic, and/or machining/fabrication experience helpful, • 3-5 years in a Quality role preferred, • BS degree in Manufacturing Engineering, Mechanical Engineering, Electrical Engineering, or other related engineering discipline or: An AS degree and/or previous experience will be considered in lieu of a BS degree, • ASQ CQE, ASQ SSGB certification preferred, • Understanding of GD&T and CMM measurement reporting and inspection layout metrology, • Proficient in the use of quality tools and practices to establish approval criteria that ensure the identification of quality failures, using consistent appraisal techniques for internal and external manufactured parts and assemblies, • Knowledge of custom manufacturing operations including fabrication, welding, machining, assembly, testing, and manufacturing engineering helpful, but not required, • Ability to read, analyze, and interpret technical data, • Must possess good communication skills, both verbal and written, • Ability to effectively present information and respond to questions, • Must be able to teach required skills comfortably verbally and physically to production assembly staff, • Ability to overcome obstacles and pursue alternate methods when required, • Ability to work with a diverse group of individuals and extract, lead, and implement improvement ideas, • Demonstrated ability to facilitate and partner with cross-functional teams, • Must be time-driven, process a strong product development & operations attitude, and exhibit strong project management skills Additional Information All your information will be kept confidential according to EEO guidelines. We provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status or genetics. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. If you have a difficulty applying for any job posted on Harsco Rail’s website because a disability prevents you from using the online system, Harsco Rail offers the following alternate application procedure: Contact Matthew Fink, HR Director NoAM at 803-822-9160 and Harsco Rail will arrange for an alternate method of applying and will consider your application together with all other applications received for the job. Please call only for disability application.

Job Description INDUSTRIAL EQUIPMENT FIELD MECHANIC YOU SHOULD WORK FOR EST… If you would enjoy working with a small but mighty global family business in Columbia, South Carolina, and you bring a solid knowledge of electro-mechanical systems, industrial equipment, pumps, motors, VFD’s, plumbing, piping, industrial pressure washing systems, generators, hydraulics, pneumatics, PLC systems to the table, we want you to apply… now. RESPONSIBILITIES AND DETAILS: • Assemble and install new equipment, inspections, preventative maintenance, troubleshoot, repairs and emergency service of industrial process equipment at customer sites., • Willing and able to travel extensively, locally as well as overnight and out of state., • Excellent driving record and willing to submit to a thorough background check that complies with the DOD and our other government partners., • We will provide training and one-on-one support by top management to assist you in being successful., • Pay depends on experience and skill level., • And great benefits. JOB REQUIREMENTS:, • Able to understand mechanical, electrical, and electronic functionality and use knowledge to troubleshoot equipment., • Must provide excellent service to our valued customers., • Minimum 2 years’ experience, 5 years plus is preferred. We are an Equal Employment Opportunity (EEO) employer and welcome all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, or religion or other legally protected status. Visit our website at to learn more about EST Companies, LLC Powered by JazzHR jLDnozcJp0

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! We are seeking experienced Fire Alarm/Intrusion/Burglar Installation Technicians to join our growing team. This role involves installing, troubleshooting, and maintaining fire alarm systems across various commercial and retail locations nationwide. Ideal candidates will have strong technical skills, a commitment to safety, and the flexibility to travel extensively. We seek self-motivated and reliable technicians who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Why Wachter? • Full-time work, • Competitive Compensation based on experience, • Paid weekly, • Per-Diem paid when overnight travel is required, • Company vehicle provided, in some cases, after initial 2-4 of employment, • Drive time and mileage paid for use of personal vehicle when travel is required, • Paid Vacation and Holidays, • Opportunities for certification and career advancement, • Supportive team environmentBenefits Package- Company Paid!, • Medical, Dental, Prescription & Vision Benefits, • Life, AD&D, and LTD insurance, • Paid Vacation and Holidays, • MD Live & TriaHealth, • Company-Matched 401(k) and IRA Retirement Savings.Key Responsibilities:, • Installation, troubleshooting, and maintenance of fire alarm systems infrastructure., • Running low-voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work., • Installing cable support structures such as j-hooks, cable racks, and innerduct., • Conducting tests to ensure all newly installed cable systems and component devices are operational., • Troubleshooting issues with cable networks and fire alarm panels., • Ensuring all installations and repairs comply with NFPA standards, including NFPA 70 and 72., • Collaborating with team members on pre-installation design and planning., • Maintaining accurate and detailed records of all work performed., • Adhering to all required project safety requirements as set forth by Wachter, our customers, or OSHA.Qualifications:, • Proven experience in field installation within security environments: Fire Alarm and/or Intrusion., • Current and valid state-required Physical Security and/or Life Safety license., • In-depth knowledge of NFPA standards, especially NFPA 70 and 72., • Experience reading blueprints and site maps., • Comfortable working at heights of 20–60 feet using lifts., • Ability to work in cramped spaces and operate BOOM or scissor lifts., • Proficiency with smartphones, computers, email, spreadsheets, and Microsoft Office., • Possession of basic PPE and reliable transportation during the initial training period., • Valid driver’s license with a clean driving record (no DUI/DWI in the last 3 years)., • Availability for extensive travel (2–6 weeks at a time) and flexible shifts including nights and on-call work.Preferred Qualifications:, • NICET Level 2 certification or State-required licenses., • Knowledge of cabling infrastructure and conduit installation., • Ability to identify independent colors and learn color codes.

Job Description Seeking Professional Licensed Engineer with 5 – 15 years of experience in the water industry. Background and experience in municipal or industrial water, wastewater, reclaimed water, stormwater, detailed design, utility management, operations and maintenance, and/or program management are desired. Hazen and Sawyer is a stable, growing, employee-owned company where engineers and scientists are valued. We are committed to providing technically superior solutions to our clients for all things water. Education requirements are a B.S. degree in Environmental, Civil, Mechanical or Chemical Engineering or commensurate hands-on experience that provides the candidate with the knowledge to complete the specific duties. Position requires a positive attitude along with excellent written communication and interpersonal skills, as well as being capable of interfacing effectively with clients, staff, and regulatory agencies. Specific duties will vary depending on office needs and candidate qualifications. We provide a comprehensive benefits package which includes employer paid life insurance, 401k employer contribution (after 1 year of service), performance bonus, comprehensive family medical, dental and vision insurance, paid time off, holidays, short-term and long-term disability, paid parental leave (after 1 year of service), employee assistance and wellness programs. Typical starting pay range for this position depends on skills, experience, education and geographical location. -Maryland will be $80,000 – $176,000

Job Description it's what's inside that counts Now Paying Hiring Bonus: $5,000 in the first year of employment! There’s more to CMC than our products and the buildings, structures, and roads they go into. At CMC, it’s the people inside our recycling centers, fabrication plants, manufacturing facilities, steel mills and offices that make us who we are as a company. Our success comes from finding, retaining, and supporting the highest quality talent by offering: • Day 1 Benefits Coverage with low cost Medical, Vision, Dental, • Day 1 Paid-time Off and Vacation, • 4.5% Company Match 401(k) plan, • $500 Annual Company-paid Lifestyle Benefit, • Competitive Compensation and Bonuses, • Company-paid Life and Disability Insurance, • Employee Stock Purchase Plan, • Maintain all aspects of overhead cranes, • Heavy emphasis on electrical maintenance, • Electrical systems, AC Drives, Static Stepless, AC Contactor, and PLC controls, • 3 Phase 480 power, AC magnet controllers and DC magnet controllers, • Mechanical systems, gearboxes, wheels, couplings, and structureWhat You'll Need, • At least one year of experience in an industrial maintenance environment or equivalent military experience, • Experience troubleshooting 480vac 3 phase motor control systems, • Ability to provide written and/or electronic reports and verbally communicate with customers, • Ability to work at heights greater than six feet off of the ground, • Ability to pay close attention to detail requiredYour Education If you’re ready to reimagine ways to make the steel industry more sustainable, reinforce the bridges and roadways that connect our communities, and raise the bar for what it means to do meaningful work day in and day out. In short, you’re ready to be part of CMC. Join us and start moving your career — and our world — forward. CMC is committed to providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, age, physical or mental disability, national origin, citizenship, military or veteran status, sexual orientation, gender identity and/or expression, genetic information, or other status protected by federal, state or local law. #IND-HTF

Job Description Sheet Metal Mechanic Location: Columbia, SC Walker White Mechanical is a leading provider of mechanical services, specializing in HVAC, plumbing, and piping systems. Our commitment to quality, safety, and customer satisfaction is evident in the exceptional work we deliver across a wide range of industries. Join our team to work with industry professionals and contribute to our continued success. Position Overview: We are seeking a skilled Sheet Metal Mechanic to join our growing team at Walker White Mechanical. This role is vital to the fabrication, installation, and maintenance of sheet metal systems. You’ll work on commercial and industrial projects, ensuring all installations meet safety standards, codes, and customer specifications. Responsibilities: • Fabricate, install, and maintain sheet metal systems for commercial and industrial projects., • Read and interpret blueprints, sketches, and job specifications to complete projects., • Use tools and machinery to cut, bend, and shape sheet metal., • Ensure all installations comply with safety regulations and quality standards., • Work closely with project managers and other team members to ensure timely project completion., • Perform routine inspections and maintenance on sheet metal systems as needed., • Minimum 2 years of experience as a Sheet Metal Mechanic in commercial or industrial settings., • Strong knowledge of sheet metal fabrication, installation, and maintenance., • Ability to read and interpret blueprints and technical drawings., • Familiarity with HVAC and other mechanical systems is a plus., • Strong problem-solving skills and attention to detail., • Ability to work independently or as part of a team., • Valid driver’s license and reliable transportation., • Competitive pay and benefits package., • Opportunities for growth and advancement., • A collaborative and supportive team environment. We encourage applicants from all backgrounds to apply.

Job DescriptionImmediately interviewing and testing Flux Core Welders and Fitters! Job Description Join our team where you will work with a leading steel fabricator, completing essential fitting duties. This role involves structural steel fitting, flux core welding, and pipe fitting. Candidates must be proficient in using a tape measure to the 1/16th of an inch and should be capable of lifting up to 50 pounds. Candidates with all relevant experience are encouraged to apply! Responsibilities • Perform flux core welding and fitting on structural carbon steel, • 2G, • Accurately read and interpret a tape measure to the 1/16th of an inch., • 1-2 years of experience in structural steel welding and fitting. Benefits: 401k and medical/dental/vision health insurance on and off contract Why Work Here? Be part of an inclusive team that values skill development and offers a dynamic work environment. We foster a culture of growth and provide opportunities for career advancement. Schedule Monday - Thursday: 5am - 5pm Fridays: 5am - 1pm Saturdays (if production is high): 5am - 1pm Job Type & Location This is a Contract to Hire position based out of Columbia, SC. Pay and Benefits The pay range for this position is $20.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Columbia,SC. Application Deadline This position is anticipated to close on Dec 22, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description About the Company Our client is a leading independent supplier of diesel fuel injection systems to OEMs and the aftermarket. Their Columbia, SC Research & Development facility tackles complex thermal, mechanical, and hydraulic challenges—driven by robust experimental data and over 100 combined years of materials engineering experience. This is not an assembly-line job. This is hands-on testing, diagnostics, troubleshooting, and working directly with diesel engines, fuel injection equipment, and advanced mechanical systems. If you enjoy solving problems, working with engines and components, and being part of an R&D environment, this is an excellent long-term opportunity. Position Summary The Test Technician is responsible for testing and evaluating new and existing diesel-related products. This includes running mechanical, hydraulic, and electrical tests; troubleshooting equipment; documenting results; and supporting engineering teams. They are looking for someone with a strong mechanical background, a customer-focused mindset, and a commitment to continuous improvement. Day-to-Day Responsibilities You will work hands-on with mechanical, electrical, diesel, and hydraulic systems. Daily duties include: • Perform hot gas testing (turbo, EGR, intake valve systems), • Support durability testing on engines and components, • Assist with vehicle testing, • Run, maintain, and troubleshoot test equipment and instrumentation, • Mechanical systems, • Hydraulic systems, • Electrical systems, • Instrument test parts and conduct instrumented tests, • Monitor and document long-duration durability tests, • Evaluate test results, ensure data quality, and communicate findings, • Maintain a clean, organized, and safety-focused workspace Two Technician Tracks Available There are two similar roles under the Test Technician title: 1. Senior-Level Test Technician Ideal for candidates with: • Diesel engine experience (vehicle or generator), • Fuel injection system knowledge 2. Mechanical Systems Technician Ideal for candidates with: • Maintenance experience with mechanical systems, • Pumps, valves, hydraulics, pneumatics Preferred Qualifications • 5+ years experience with diesel vehicles, generators, or mechanical systems, • Testing or laboratory experience (preferred but not required), • Strong mechanical background in:, • Engines & engine electronics, • Hydraulics, • Machining, • Mechanical systems, • Ability to read and interpret measurements (metric & inch systems), • Basic math and mechanical aptitude (threads, fasteners, tolerances, etc.), • Good computer skills (Microsoft Office; ability to learn test software) Benefits A full competitive benefits package, including: • Medical, dental, and vision insurance, • 401(k) with company match, • Paid Time Off (vacation & holidays), • Life insurance, • Short- and long-term disability, • Professional development & company-paid training Why This Role Stands Out • Work directly with cutting-edge diesel and fuel injection technology, • Be part of an experienced, engineering-driven R&D team, • Hands-on, problem-solving work — not a repetitive shop job, • Career growth into senior technician, engineering support, or specialized testing roles

Job Description Job Title: Millwright Location: Columbia, South Carolina, United States Job Type: Full-Time Pay: $28 – $32 per hour (DOE) Work Hours: 45–55 hours per week, with some Saturdays required Position Overview: We are seeking a skilled and motivated Millwright to join our team in Columbia, SC. The ideal candidate will have hands-on experience with industrial machinery installation, maintenance, and repair. This role requires strong mechanical aptitude, attention to detail, and the ability to work both independently and collaboratively in a fast-paced environment. Key Responsibilities: • Read and interpret blueprints, schematics, and technical manuals to install, maintain, and repair industrial machinery., • Troubleshoot mechanical, hydraulic, and pneumatic systems to ensure proper operation., • Operate hand and power tools, welding equipment, and machining tools safely and effectively., • Perform regular maintenance tasks, including alignment, calibration, and inspection of machinery., • Collaborate with team members and other departments to complete projects on time., • Completion of a recognized millwright apprenticeship program or equivalent experience., • Journeyman Certification as a Millwright., • Must have OSHA 10 Certificate., • Proficiency in reading and interpreting blueprints, schematics, and technical manuals., • Strong mechanical aptitude with excellent troubleshooting skills., • Experience with hand and power tools, welding equipment, and machining tools., • Physical stamina and dexterity to lift, bend, climb, and perform other physically demanding tasks., • Excellent communication and interpersonal skills., • Willingness to undergo a Pre-Employment Drug Screening., • Additional certifications in welding, machining, or industrial maintenance are a plus., • Experience with specific types of machinery or equipment relevant to the industry is desirable.

Job DescriptionDescription: SEEKING EXPERIENCED COMMERCIAL LOW VOLTAGE CABLE TECHNICIANS WE OFFER COMPETITIVE SALARY, BENEFITS, 4-DAY WORKWEEKS & A GREAT CULTURE! Seeking Commercial Cabling Technicians to work in the Columbia market. Position Summary Install, service, maintain, repair & alter cabling to include: twisted pair, coax, low voltage, CAT6, single & multi-mode fiber optic, communications, and/or other various low-voltage cable systems. Position Responsibilities • Physical installation & removal of cabling components, cabinets, pathway systems/cable tray, move equipment, racks, and related communications infrastructure materials., • Ensure quality and safety guidelines are being followed, • Evaluate, diagnose, troubleshoot cabling infrastructure systems and perform repairs as necessary., • Travel to client sites as needed to complete assigned work and transport a variety of items (e.g. tools, equipment, supplies, etc), • 1+ years of experience, • General construction knowledge, • Ability to read & interpret blueprints and construction drawings & specifications, • Previous experience in Structured cabling installation, • Able to terminate and splice fiber optics, • Able to install and terminate CAT 6/CAT 6A, • Knowledge of through-wall penetration systems, • Knowledge of industry standards including BICSI, ANSI, EIA/TIA, and local and NEC, • Knowledge of publications pertaining to standard cabling for telecom, data, security & wireless systems practices, engineering & Federal, State & local safety standards, • BICSI Training/Certifications are a plus, • Proven ability to install, terminate & test low voltage cables to include twisted pair cable, coax, power limited tray cable, stranded & solid conductor low voltage cable and fiber optic cable.., • Able to work off a lift, • Ability to install cable pathways, conveyances (e.g. ladder, trays, support systems), • Ability to carry up to 30 lbs. and lift up to 50 lbs, • Ability to climb ladders and work from heights, • Able to work flexible schedule, • Able to pass a full background & drug screening, • Dependable and reliable!, • Good communication, organizational & time management skills, • Teamwork orientation, with mentoring skills and a willingness to help others, • The ability to work well with all team members ABOUT NETWORK CONTROLS At Network Controls, we provide high-quality single-source design, installation, and maintenance of communication networks and technology infrastructure. Team members specialize in niche industries, including office and industrial, educational facilities, healthcare, manufacturing, and the public sector (including military and quasi-government facilities). With project teams in Greenville, South Carolina, Columbia, South Carolina, Charleston, SC and Charlotte, North Carolina, we serve companies and organizations throughout the Southeast. Our customers choose us because of our track record. We get the job done right, on time, with no hassle. Our team members are highly certified, with the experience to design and install robust networks and systems for each industry we serve. What We Offer In addition to competitive pay, stable employment, and growth opportunities, we offer a variety of benefits as part of our total compensation & rewards package. • Weekly Pay, • 4-day work schedule for our field team members - with Overtime available, as applicable/based on position & project schedules, • PTO (Paid Time Off), • Paid Holidays, • Additional Pay for Shift Work, as applicable, • Training & Certification Opportunities, • Cross-Training Opportunities, • Employee Appreciation Events, • Company Swag - Apparel, hats & a variety of other items available, • Medical, dental, vision, disability, and voluntary life options. Eligible the first of month following date of hire., • 401k Match upon eligibility with 100% immediate vestingRequirements:

Job Description Is AMERICAN the right fit for you? AMERICAN SpiralWeld Pipe Company is hiring Heavy Equipment Operators at our East Coast Operation in Columbia, SC. At AMERICAN, we believe in doing things THE RIGHT WAY. That's why our employees earn competitive pay, receive excellent benefits and have opportunities to grow. All this while making products the world needs. As a Heavy Equipment Operator at our manufacturing and fabrication facility, you will be operating industrial lift equipment-primarily heavy-duty forklifts-handling loads up to 65,000 pounds. Safety, precision, and teamwork are essential. Our Operators use heavy-duty forklifts (65,000-lb, 55,000-lb, and 36,000-lb capacity) and other material-handling equipment to safely move, load, unload, and stage extremely heavy pipe, steel, and fabricated components. Additionally, our Heavy Equipment Operators ensure compliance with safety procedures, maintain equipment, and support production schedules across the plant. Key Responsibilities include: • Safely operate heavy-capacity forklifts (up to 65,000 lb rating) and related material-handling equipment., • Load/unload trucks, move materials to/from racks, staging areas, and production lines., • Perform pre-shift and post-shift equipment inspections; report and tag defects., • Secure loads using approved rigging and blocking methods; verify load stability and weight limits., • Follow all safety protocols, lockout/tagout, and PPE requirements., • Coordinate with crane operators, riggers, and production teams for safe material movement., • Maintain accurate load, movement, and shift logs as required., • Assist with yard organization, inventory movement, and housekeeping of work areas., • Complete basic equipment maintenance (fluids, battery checks, tire/track inspections) and notify maintenance of issues. Qualifications • Minimum 1 year experience operating heavy-capacity forklifts or comparable heavy equipment in an industrial setting., • Demonstrated experience handling loads of 10,000 lbs +, 36,000+ lbs; experience with 65,000 lb loads strongly preferred., • Valid forklift/operator certification for heavy-capacity equipment (company or third-party)., • Strong knowledge of rigging, load securement, and weight distribution principles., • Ability to read load charts, basic shop drawings, and weight specifications., • Strong attention to safety and quality; history of safe operation., • Ability to work rotating shifts, overtime, and weekends as needed., • Physical ability to perform required tasks, including climbing, standing, and occasional heavy lifting., • Good communication skills and ability to work as part of a team. Preferred • OSHA 10/30 or equivalent safety training., • Certified rigger/signal person or experience working with overhead cranes., • Experience in steel, pipe, or heavy fabrication yards., • Clean driving record. What We Offer • Competitive pay and shift differentials., • Medical, dental, vision, and retirement benefits., • Paid time off and holidays., • Ongoing training and certification opportunities., • Stable, safety-focused work environment.

Job DescriptionSalary: starting at $28 per hour Maintenance Supervisor Location: Deer Park and Jackson Creek Station- Columbia, SC SUMMARY: Along with the Community Manager, the Maintenance Supervisor is responsible for overseeing the physical assets, general maintenance repairs, apartment make-readies, preventive maintenance and construction or rehabilitation projects for an apartment community. Responsible for walking and accepting units from construction, maintaining adequate inventory of supplies for repairs and monthly maintenance budget monitoring. Must beflexible and able to workvaried schedule, including weekends and some holidays as required. I. ESSENTIAL DUTIES AND RESPONSIBILITIES • Under direction of the Community Manager, supervises, schedules and performs maintenance activities for apartment community along with maintenance staff., • Work with the office team and Community Manager (i.e., walking apartments, move-in/move-out reports, etc.)., • Determine weekly apartment make-ready and Service Request schedules., • Report apartments that are ready to show to the Community Manager., • Complete weekly/daily maintenance employee schedules and assignments in tandem with Community Manager., • Communicate assignments and tasks to employees. Make sure they have all the instructions necessary to complete assignment properly., • Periodically check the work progress of each maintenance employee. Provide immediate assistance and instruction as needed., • Provide input to Community Manager regarding employee performance evaluations, employee compliments from residents, corrective counseling needs, etc., • Assist Community Manager in recruiting and interviewing potential staff members., • Coordinate, schedule and respond to resident/management requests and Service Request for occupied apartments., • Use Service Request and schedules to establish priorities. Determine with Community Manager, requests or emergencies that should be top priority., • Assign Service Requests equally to Maintenance Technician(s)., • Monitor the completion of Service Requests in order to limit call backs., • Coordinate warranty work orders with Vendors., • Monitor the number of times a specific repair must be repeated. Determine course of action., • Coordinate, schedule and prepare vacant apartments for move-in., • Walk all vacant units to determine make-ready needs. Coordinate effort with Community Manager to make schedule and assignments. If major appliances or carpets need replacing, discuss with Community Manager before taking action., • Ensure all repairs/replacements necessary for apartment to be occupied are completed., • Ensure all trash from apartments are cleaned out before, during and after make-ready activity., • Coordinate and schedule appropriate safety and skills training for maintenance employees., • Assess training needs of maintenance employees and along with Community Manager and Director of Maintenance, provide input for training programs., • Provide one-on-one training to employees that may need to polish current skills or wish to learn new skills., • Prepare, train and encourage all levels of maintenance staff for the opportunity to be promoted., • Provide initial safety and safety equipment training for all new employees., • Identify and correct hazardous community conditions., • Tour property daily to look for needed maintenance and liability hazards and report to Community Manager., • Repair hazards or assign completion of these tasks to the Maintenance Technicians. Also secure storage/pool areas, check timers and listen for electrical shorts and malfunctioning motors., • Periodically complete written property safety audits., • Coordinate, schedule, and perform preventive maintenance on equipment and apartments., • Order supplies while managing maintenance budget., • Work with Community Manager and use input from maintenance staff to determine supplies and equipment needs., • Must get approval from Community Manager prior to placing orders for major expenditures and unbudgeted items., • Provide input to Community Manager in determining needs for next fiscal year budget., • Attendance is an essential job function., • May be requested to assist in other communities, if needed, • Assist with hazardous weather problems, fires, floods, freezes, etc., • Responsible for overall organization and cleanliness of work areas and maintenance shops., • Attends and participates in industry and NHEs training programs as required., • Responsible for vendor management, contract monitoring and quality control., • Performs the tasks of subordinate associates as needed., • Perform any and all other duties as requested or assigned by your supervisor / manager., • This job description does not list all functions and tasks. Job functions may be added, deleted, or modified at any time by the NHE management team. II. KNOWLEDGE, SKILLS AND ABILITIES • SPECIFIC SKILLS/EQUIPMENT, • Computer, • Propane torch (Plumbing), • Steam clean/shampoo machine, • Key machine, • Sewer machine, • Sink machine, • Leak detector, • Ampro meter, • Volt meter, • Manifold gauges, • Charging cylinders, • Boilers, • Spray paint rig, • Air conditioners, • Appliances, • Water heaters, • Welding torches (A/C), • Hand tools, • Must be able to perform all facets of apartment make-ready., • On a regular basis must use independent judgment (following prescribed procedures) to determine actions to be taken, priorities, emergencies, etc., • Must be able to deal with moderate to high levels of stress due to meeting deadlines, reprioritizing activities and supervising employees., • Will interact regularly with residents, vendors, contractors, supervisors, employees and coworkers and therefore, must have excellent interpersonal skills., • Ability to handle multiple tasks and prioritize duties and responsibilities., • Attention to detail., • Must have the ability to work with little direction maintaining confidentiality and professionalism., • Be a team player. III. SUPERVISORY RESPONSIBILITIES Under direction of the Community Manager, supervises on-site maintenance staff, which may include Apprentice Techs, Techs, and Groundskeepers. IV. QUALIFICATIONS • Construction experience preferred., • Previous supervisory experience is required., • Must be able to troubleshoot and repair HVAC equipment, plumbing systems, electronic systems, all major appliances, pool and spa equipment and other systems on community (gates, phone jacks, irrigation systems, etc.)., • Must have a valid drivers license or means of immediate transportation to provide service calls. V. EDUCATIONAL AND/OR EXPERIENCE • High School Diploma or equivalent required; some college or trade school preferred., • Position requires a minimum of 5 years general maintenance experience and/or at least 1-year multi-family, industrial or institutional Service Request experience., • TRAINING/CERTIFICATES/ASSOCIATION MEMBERSHIPS, • Freon Recovery Certification Type I and II, or Universal., • Certified Apartment Service Technician (CAMT) preferred., • Certifications in boilers, plumbing, HVAC (basic and advanced), journeyman license, use of fire extinguisher and first aid preferred., • Must have training in compressor diagnosis, appliance repair, etc., • Must have certifications/permits required by city or state to perform job responsibilities (i.e., pool operations, maintenance, electrical, plumbing, HVAC, etc.)., • Painting experience. VI. LANGUAGE/MATHEMATICAL/REASONING ABILITY Ability to generate reports, business correspondence. Effectively present information and respond to questions from clients, customers, and the general public. Must possess the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Must be able to read and write in English at intermediate level to read diagrams, meters, instructions, write reports, etc. Must be able to apply common sense understanding and carry out instructions and plans furnished written and verbally. VII. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to do the following: • Will use hands to finger, handle, or feel and; talk or hear., • Will be exposed to constant activity that requires intermittent standing, walking, bending, crouching, pushing/pulling, lifting/moving/carrying (light to heavy weight material/appliances/equipment) up to and in excess of 50 pounds or more, climbing ladders/stairs, and walking on rooftops., • Requires manual dexterity sufficient to operate small-motorized equipment (i.e., repetitive hand/wrist, griping and elbow motion)., • Must have normal range of hearing, close, distance and color vision, color discrimination, peripheral vision, and depth perception and ability to adjust focus for proper operation and repair of machines, wiring, and equipment., • Must be able to complete tasks wearing appropriate safety equipment (i.e., back belts, goggles, masks, gloves, etc.)., • Will be exposed on a regular basis to outdoor environment (i.e., heat, cold, damp, rain, etc.)., • Will also have light to moderate exposure to injuries (i.e., chemicals, electrical, machinery, tools, lifting, etc.)., • Will be exposed to some low-level noise when using power tools. Hazards can be minimized with proper lifting techniques, MSDS and general safety training and wearing of proper safety equipment., • Will be regularly called upon to work overtime and service calls after-hours schedules. Refer to your Community Manager for community specific service call/after-hours guidelines. VIII. WORKING CONDITIONS AND ENVIRONMENT While performing the duties of this job, the employee primarily works indoors/outdoors from the NHE, Inc. on-site property. The employee will regularly work in a highly mobile environment in performance of the above duties and responsibilities. The noise level in the work environment is usually moderate. IX. POLICIES AND PROCEDURES The employee in this job must be knowledgeable about the company's policies and procedures as described in the company Employee Handbook. BENEFITS All full-time employees are eligible to participate in our benefits program. NHE offers: • HDHP Health Insurance Plan, • PPO Health Insurance Plan, • Vision Insurance, • Dental Insurance, • Short-Term Disability, • Long-Term Disability, • Group Life Insurance, • Health Savings Account (offered for HDHP plan), • Flexible Spending Account (FSA), • Employee Assistance Program (EAP), • 401k Retirement plan, • 12 Paid Holidays (includes Birthday Holiday), • Up to 130 hours of PTO About NHE, Inc. As a diverse real estate management company, we appreciate the importance that professionalism, caring service and relationships have on providing quality services to residents and property owners alike. We work to provide superior service by capitalizing on our vast experience, dedicatedemployees and investments in technology, training and certification. Based in Greenville, South Carolina, NHE is a leader in homeowner association management services, multi-family and apartment management solutions, and consults with owners and operators to determine best practice operations. EOE

Job DescriptionCompany Description Harsco is recognized for technical leadership and worldwide experience in virtually all major aspects of railway track maintenance. We enable railroads to operate at peak efficiency over smooth, precisely aligned track that increases railway safety while reducing fuel consumption and other key operating costs. Our broad array of equipment and services support every type of railway operator, from major national and international railway systems, to short lines and high-speed urban transit networks. Job Description The ERP Materials Analyst is responsible for managing, analyzing, and optimizing material requirements using enterprise resource planning (ERP) systems. This role ensures accurate data flow, material availability, and alignment between production schedules, procurement, and inventory control. The ERP Materials Analyst acts as the link between supply chain operations, IT/ERP systems, and cross-functional teams to support efficiency and cost effectiveness. ESSENTIAL DUTIES AND RESPONSIBILITIES Will include the following, but other duties may be assigned: * Maintain and update material master data, report bills of materials (BOMs)/routing issues, and item update & maintain attributes within the ERP system. * Analyze material demand using ERP/MRP tools to verify system functionality. * Troubleshoot ERP-related material issues and collaborate with leadership and IT/ERP support teams to resolve data or process discrepancies. * Partner with procurement, production, logistics, and finance teams to streamline material workflows. * Conduct root-cause analysis for ERP system errors affecting materials planning and flow. * Train end-users on ERP material management functions and best practices. * Identify opportunities for process improvement and system enhancements to strengthen supply chain performance. * Manage ERP data sets including master data and transactional data * Ensure accuracy and integrity of ERP data by performing audits, validations, and cleansing activities. * Work with area Leadership to develop dashboards, reports, and KPIs from ERP and integrated systems to support business decision-making. * Analyze ERP data to identify trends, inefficiencies, and opportunities for process improvements. * Support ERP upgrades, enhancements, and integrations by providing data analysis and testing. * Troubleshoot data-related issues and resolve system discrepancies. * Document data processes, policies, and best practices to ensure compliance with governance and audit standards. * Participate in Production order close out activities, including system issues, meeting requirements with finance, production and planning. * Partner with IT and business stakeholders to implement automation, process improvements, and analytics solutions. * Provide training and support for ERP data reporting and analysis tools to business users. * Participate in daily meetings (such as MDI walks) as required to communicate issues and support continuous improvement. Qualifications Preferred Qualifications * Bachelor’s degree in Supply Chain Management, Business, IT, Industrial Engineering, or related field. * 5+ years of experience in Materials production ERP environment. KNOWLEDGE AND SKILLS * Strong understanding of production processes, manufacturing techniques, and material flow. * Ability to manage complex schedules, prioritize tasks, and adapt to fast-paced, changing environments. * Strong analytical and problem-solving skills, with proficiency in Excel (including advanced techniques) for data analysis and reporting. * LN experience required, with the ability to ensure transaction accuracy. * Excellent communication and interpersonal skills to collaborate across departments and motivate teams to achieve plant goals. * Exceptional attention to detail, organizational skills, and commitment to accuracy in maintaining records and schedules. * Ability to work independently and in a team-oriented environment under pressure. Additional Information We provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status or genetics. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. If you have a difficulty applying for any job posted on Harsco Rail’s website because a disability prevents you from using the online system, Harsco Rail offers the following alternate application procedure: Contact Matt Fink HR Director NoAM at 803-673-8267 and Harsco Rail will arrange for an alternate method of applying and will consider your application together with all other applications received for the job. Please call only for disability application.

Job DescriptionBuild your career inside the mill Imagine starting your shift, gearing up with PPE, and running a quick pre-operation review with your team. You check inspection logs, walk the line, and help get the rolling mill ready to produce. Throughout the day, you pitch in with Operations Support and Maintenance, keep equipment humming with basic adjustments, and jump on issues fast to keep products moving safely and on time. What a typical day looks like • Support maintenance personnel when called upon and handle routine fixes independently when appropriate., • Follow all safety policies without exception; wear required PPE and immediately report hazards or unsafe conditions., • Complete equipment inspection reports every shift and communicate production concerns, needs, and improvement ideas., • Execute tasks assigned by Operations Support management safely and on schedule., • Perform minor, routine maintenance or repairs without direct maintenance assistance when you’re trained to do so., • Suggest better methods and procedures as part of continuous improvement., • Keep your area clean and organized as part of daily housekeeping., • Troubleshoot work issues using your knowledge, experience, and teamwork., • Know and follow start-up, shutdown, and emergency procedures.What you bring, • A collaborative mindset, strong work ethic, attention to detail, and solid organizational habits in a fast-paced setting., • Comfort working around heat and cold, chemicals, dust, fumes and mists, uneven walking surfaces, high noise, elevated areas, and confined spaces., • Basic computer proficiency., • Reliable attendance, follow-through on tasks, and flexibility to meet production needs., • Ability to learn quickly and handle multiple tasks at once., • Capability to lift up to 50 lbs.Schedule and pay considerations, • Rotating shifts that may include weekends and holidays., • Some overtime will be required.Education, • High School Diploma or GED required.Skills that make you stand out, • Troubleshooting industrial automation equipment, • Automotive repair, • Crane operation, • Mechanical assembly, • Meeting all physical requirements of the roleTools and equipment you may work with, • Overhead cranes

Job Description JOB FUNCTION: The position is responsible for one or more of our industrial cleaning accounts including all operational, administrative, account expansion and customer relation’s responsibilities. ESSENTIAL FUNCTIONS: 1. In conjunction with the customer, develops work scope, schedules, and staffing to complete the work defined by the client, including on-going work, new projects and shut downs. 2. Ensures the established and un-established quality standards of MPW and the customer are met or exceeded. 3. Reviews all payroll reports, promotions, demotions, annual reviews, disciplinary actions, transfers, terminations, employee relations, employee safety, and employee communications. 4. Responsible for expanding the business at the account also finding and developing for the other business “opportunities” outside of the account. 5. Manages the account within the guidelines established by the customer contact as well as the policies and procedures established by corporate MPW. 6. Responds to customer related complaints and inquiries, soliciting senior management and /or corporate staff support where appropriate. 7. Reviews the disciplinary practices of supervisors and foremen to ensure consistency as related to disciplining employees. 8. Oversees all of the location’s inventory needs., 9. Responsible for obtaining a PO for any and all work performed which is outside the scope of the contract. 10. Provides information as related to contract negotiations, as well as being an active participant., 11. Responsible for daily meetings with the customer to review the status of the work schedule., 12. Responsible for developing the supervisory staff to meet the management needs of the account and to provide adequate supervisory backup. 13. Manages the MPW expenditures at the account operating level to meet profit goals., 14. Performs other duties as directed. ADDITIONAL RESPONSIBILITIES: 1. Situations may arise in the areas of employee relations, customer relations, quality assurance measures and/or production. 2. Ensuring the “job” gets done in the time frame established and the quality of the work meets or exceeds standards of the customer. This effort is hampered by the fact that the company has in excess of 200% turnover and no advance notice of unscheduled employee absences. 3. The account manager must also be constantly “looking” for other business opportunities. This includes both industrial and other facility support opportunities. 4. Has the authority to make unsupervised decisions consistent with the scope of responsibilities. PHYSICAL REQUIREMENTS: 1. Ability to move up to 50 Lbs., with or without accommodation., 2. Ability to maintain a consistent workload that involves physical manual labor., 3. Ability to maintain alertness and fitness for duty., 4. Ability to position oneself for work conducted in and around confined spaces., 5. Ability to wear respirators in environments that may expose you to chemicals, fumes, etc., 6. Ability to maintain workloads that may include travel to a variety of states for days or weeks, and daily timeframes that could exceed the typical 8-hour shift. QUALIFICATIONS: 1. Bachelors Degree in Business Management Degree with emphasis in Production Operations Management, a Bachelor’s Degree in Engineering related field or a related Associates Degree preferred. High school diploma acceptable. 2. Understanding and complete knowledge of a high-volume power stations and boilers, it’s cleaning and maintenance, with the ability to schedule manpower in an effort to increase the efficiency and effectiveness of the operation preferred. 3. Knowledge of supervision and scheduling of manpower intensive work activities with emphasis on service type business acceptable. 4. Professional oral and written interpersonal communication., 5. 5-7 years experience in managing and scheduling employees to perform cleaning and quality assurance measures as related to power station or other labor-intensive industrial cleaning is ideal. 6. 3-5 years experience, as MPW Operations Manager or Account Supervisor is a plus., 7. 3-4 years management of top-level supervisory experience in power related business is acceptable.

Job Description Warehouse Job description If you are interested in joining a well-established industrial distributor that has been in operation for 65 years in the North Carolina and South Carolina region, and more recently in Pittsburg, Kansas, please read on! We are a highly recognized fastener distributor that services a large number of customers in a wide variety of industries nationwide. We have a physical presence in both Carolinas and have branches located in all five major metropolitan markets. We are currently searching for Warehouse Associate to join our Columbia, SC branch! If you are interested in becoming a part of a growing industrial fastener distribution leader, then we would like to talk to you! Responsibilities and Duties (may include but not limited to): • Receives and verifies incoming shipments; evaluates received inventory for accuracy by confirming to identifying purchase documentation; stock inventory in designated warehouse areas., • Prepares orders by processing requests and supply orders; pulling materials; packing boxes; labeling; placing orders in designated areas., • Prepares orders for shipment by verifying accuracy and packaging materials., • Completes deliveries and pickups by driving company truck or van., • Maintains inventory controls by collecting stock location orders and printing requests., • Maintains quality service by following organization standards., • Maintains safe and clean work environment by keeping shelves, pallet area, and workstations neat; maintaining clean shipping supply area; complying with procedures, rules, and requirements of company managers., • Abides by all company safety regulations., • Completes reports by entering required information., • Ability to work and succeed in a team environment, • Demonstrate good organizational skills including coordination, planning and personal time management, • Demonstrate basic data entry and math skills, including ability to read standard and metric measurements on an array of measuring tools, • Understand and implement internal reporting and documentation requirements for inventory control, customer service and equipment maintenance, • High School Diploma or equivalent, • Valid driver’s license and acceptable driving record, • Proven warehouse experience desired but not required, • Experience with warehouse data systems or willingness to develop necessary skills and ability, • Ability to lift boxes up to 50 pounds. Benefits Include: • Competitive Compensation Package aligned with experience, • Medical, Vision and optional Dental Insurance, • Short-Term and Long-Term Disability Insurance, • Life Insurance, • Profit-Sharing, • Paid time off Company DescriptionFounded in 1959, Fastener Supply Company is a privately owned fastener company that specializes in providing custom programs and fastening solutions to the OEM marketplace. We are highly recognized in the fastener industry and service a large number of customers in a wide variety of industries nationwide. We have a physical presence in both Carolinas and have branches located in all five major metropolitan markets as well as a new branch in Pittsburg, Kansas.Founded in 1959, Fastener Supply Company is a privately owned fastener company that specializes in providing custom programs and fastening solutions to the OEM marketplace. We are highly recognized in the fastener industry and service a large number of customers in a wide variety of industries nationwide. We have a physical presence in both Carolinas and have branches located in all five major metropolitan markets as well as a new branch in Pittsburg, Kansas.

Job DescriptionPosition: Equipment Maintenance Technician Job Type: Contract-to-Hire Location: West Columbia, SCCompensation: $28 to $35/hr OverviewWe are seeking a Equipment Maintenance Technicians to support our clients automated manufacturing line producing electrical inverters. This role is heavily hands on and focused on electrical and mechanical maintenance, with an emphasis on troubleshooting, break/fix work, and preventive maintenance. This is an excellent opportunity for technicians who want long-term growth, consistent overtime, and advancement within a growing organization. Key Responsibilities • Perform break/fix troubleshooting on automated and semi-automated manufacturing equipment, • Execute preventive maintenance (PM) on electrical and mechanical systems, • Diagnose and repair issues involving:, • Motors, drives, sensors, wiring, relays, and control components, • Mechanical assemblies, conveyors, and production equipment, • Support continuous operation of an automated inverter production line, • Work closely with supervisors and engineering teams to minimize downtime, • Follow safety standards and maintenance procedures, • Accurately document maintenance activities and repairsRequired Qualifications, • Strong electrical OR mechanical maintenance background, • Electrical skillsets are strongly preferred, • Experience with machinery maintenance in a manufacturing or industrial environment, • Ability to troubleshoot equipment independently and work in a fast-paced production setting, • Reliable attendance and willingness to work weekend shifts, • Strong technical aptitude and desire to grow within the organizationPreferred (Not Required), • Experience supporting automated equipment or automation maintenance, • PLC experience (not required, but a plus), • Bilingual (English/Spanish) is a plus, but not requiredSchedule & CompensationSchedule:, • Saturday & Sunday + 2 weekdays (open/flexible on which weekdays), • 6:00 AM – 6:00 PMHours:, • 48 hours per week, • 8 hours of scheduled overtime built in, • Additional OT opportunities available at timesPay:, • Up to $35/hour, based on experienceEmployment Type:, • Contract-to-HireEqual Employment Opportunity StatementWe are an Equal Opportunity Employer and are committed to creating an inclusive and diverse workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, or any other protected characteristic in accordance with applicable laws.

Job Description About Watts & Associates Roofing Watts & Associates Roofing is a leading commercial roofing contractor serving central South Carolina with a commitment to excellence, safety, and unmatched customer service. Our experienced team specializes in a full range of commercial and industrial roofing services including new construction, re-roofing, leak repair, preventative maintenance, inspections, and 24/7 emergency support. With decades of proven performance and integrity, we’ve built a reputation as a trusted partner in the roofing industry. We are seeking an experienced and reliable Commercial Roofing Sheet Metal Mechanic to join our team. This role involves the installation of sheet metal components and systems used in commercial roofing projects. The ideal candidate has strong technical skills, attention to detail, and the ability to work safely and efficiently in various outdoor conditions. Key Responsibilities: • Install and assemble sheet metal components such as flashing, coping, gutters, downspouts, panels, and other roofing accessories., • Ensure all work meets safety codes, quality standards, and project specifications., • Operate tools and equipment, including brakes, shears, hand seamers, soldering equipment, and portable power tools., • Collaborate with roofing teams, foremen, and project managers to complete jobs on time., • Maintain a safe and organized work environment, following all OSHA and company safety protocols., • 2+ years of experience in commercial roofing and sheet metal work (preferred)., • Proficiency with sheet metal fabrication tools and roofing installation techniques., • Strong understanding of roofing systems and construction practices., • Comfortable working at heights, on ladders, scaffolding, and lifts., • Ability to lift and carry heavy materials (50+ lbs) and work in varying weather conditions., • Valid driver’s license and/or reliable transportation., • Strong attention to detail and craftsmanship., • Problem-solving and troubleshooting skills.Company DescriptionWatts & Associates Roofing is a leading commercial roofing contractor serving central South Carolina with a commitment to excellence, safety, and unmatched customer service. Our experienced team specializes in a full range of commercial and industrial roofing services including new construction, re-roofing, leak repair, preventative maintenance, inspections, and 24/7 emergency support. With decades of proven performance and integrity, we’ve built a reputation as a trusted partner in the roofing industry.Watts & Associates Roofing is a leading commercial roofing contractor serving central South Carolina with a commitment to excellence, safety, and unmatched customer service. Our experienced team specializes in a full range of commercial and industrial roofing services including new construction, re-roofing, leak repair, preventative maintenance, inspections, and 24/7 emergency support.\r\n\r\nWith decades of proven performance and integrity, we’ve built a reputation as a trusted partner in the roofing industry.

Job Description Classification: Non-Exempt Pay: $22.00 Hourly We are Alsco Uniforms. We’ve been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It’s our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We’re seeking driven professionals with ambition to grow within our company. We’d love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Route Relief/Utility RSR supports the Service Department in its objectives to meet our customers needs through up-selling/cross-selling and providing superior customer service. Main duties are to cover routes and perform service related tasks as required. Reports to the District Manager. Our full-time employees enjoy: 401K Plan with Company Match Medical, Dental, Vision, FSA/HSA Life Insurance, Disability Insurance Vacation, Sick Time, Holidays Choice of Global Cash Card or Direct Deposit Career Advancement Learning & Development Opportunities Inclusive and Diverse Team Environment Essential Functions: • Perform all responsibilities of a Route Sales Representative and related tasks., • Learn and support all routes. Run routes as needed for holidays, vacations or other vacancies., • When not on a route, assist in rush deliveries, renewals, audits, training and any other tasks assigned by supervision., • Solicit new customers, up-sell/cross-sell/sample all lines of service or product and ensure a profitable product mix., • Actively participate in promotions and contests, training and audits., • Follow company policies/procedures regarding new customers, managing customer needs and all aspects of service., • Ensure customer loyalty and outstanding customer service. Build relationships, communicate openly, educate customers and proactively resolve concerns in cooperation with supervision., • Safely operate a delivery vehicle on each trip, following all applicable laws and company policy. Maintain vehicle cleanliness and perform regular vehicle inspections., • Handle and process customer payments. Keep route paperwork current., • Ensure timely and correct deliveries of complete textile loads, pick up soiled textiles and maintain proper inventories in accounts. Service items such as facility maintenance products., • Monitor and report competitive activity. Keep service agreements current and renewed., • Return from route and off load soiled textiles in the receiving area of facility., • Accurately prepare route paperwork and follow check-in procedures., • Follow written and verbal instructions and perform other tasks as directed by supervision. Additional Functions: • Have and maintain a valid Drivers License, CDL when applicable and be 21 years or older., • Maintain a driving record free of chargeable accidents, speeding, safety or other violations., • Demonstrate excellent skills in the operation of vehicles and verifiable minimum one year experience of safe and successful driving., • Demonstrate excellent skills in customer service and route sales., • Excellent verbal/written communication skills in English, comprehend and follow direction and good time management skills and team player., • High School graduation or similar experience. Qualified drivers license. Travel Requirements: • Daily, by delivery vehicle within a route. Typical Environmental Conditions: • Operating vehicles on public roads, in and out of customer locations, loading areas of a typical industrial laundry facility, Service Center or depot., • Indoor and outdoor areas of a typical industrial facility. Typical Physical Activity: • Physical Demands - sitting, grasping, driving stooping, kneeling, reaching overhead, moving carts up to 500 lbs., lifting up to 75 lbs, standing, walking, writing, speaking, hearing. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco is an Affirmative Action/Equal Employment Opportunity Employer. Revised: 04/29/22

Job Description NORMAL DUTIES include the following. • Maintain yard truck by doing daily maintenance and safety checks, • Report any issues with yard truck, • Perform yard checks and maintain trailer inventory, • Shuttle trailers with product and/or roll-stock to warehouse, • Properly sign and document all paperwork, • Perform trailer movements as directed, • Report maintenance and safety issues concerning trailers, • Deliver trailers to customers when needed, • Check wheels on all trailers put into docks License: Employee must have successfully completed the appropriate training programs for the operation of powered industrial trucks and have a CDL. EDUCATION and/or EXPERIENCE: High School diploma or general education degree (GED); or five years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS: Ability to read and interpret written documents such as safety rules, operating and maintenance instructions, factory orders, and procedure manuals. Ability to write routine reports and correspondence. Ability to communicate effectively. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure (English and Metric systems), using whole numbers, common fractions, and decimals. Ability to read an English and Metric system tape measure. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization may exist. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representatives of those that must be met by an individual to successfully perform normal job functions. While performing the duties of this job, an individual is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk or hear; and taste or smell. An individual frequently is required to stoop, kneel, crouch, or crawl. An individual must regularly lift and/or move up to ten pounds, frequently lift and/or move up to twenty-five pounds, and occasionally lift and/or move up to fifty pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an individual encounters while performing the normal job functions. While performing the duties of this job, an individual regularly works near moving mechanical parts. An individual is occasionally exposed to wet and/or humid conditions and temperature variations. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions. THESE RESPONSIBILITIES AND DUTIES ARE NOT INTENDED TO BE ALL-INCLUSIVE. RESPONSIBILITIES MAY BE ADDED OR DELETED AS NECESSARY.

Job Description • We are hiring immediately for full time and part time JANITOR positions., • Location: Sysco - 131 Sysco Court, Columbia, South Carolina 29209. Note: online applications accepted only., • Schedule: Full time and part time; Days and hours may vary. More details upon interview., • Requirement: A minimum of one year of warehouse janitorial experience is required. Experience in a cold/refrigerated environment is preferred., • Fixed Pay Rate: $16.00 per hour. ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the International WELL Building Institute (IWBI). We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1473363. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Rooted in hospitality, ESFM elevates the workplace experience as the single source of innovative FM solutions that ensure a safe, healthy, and sustainable environment. ESFM’s clients include many household names from Life Science, Technology, Oil & Gas and Manufacturing markets. ESFM self-performs 80% of all IFM solutions provided to clients. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA). Job Summary Summary: Keeps buildings clean and orderly. Performs heavy cleaning duties, including cleaning floors, shampooing rugs, washing walls and glass, and removing rubbish. Essential Duties and Responsibilities: • Collects and disposes of trash following approved procedures and infection control plans., • Dusts and damp mops floors following approved procedures., • Moves equipment and furniture for proper cleaning and place furniture back in correct placement., • Cleans assigned areas with the use of assigned materials and equipment. Sanitize all surfaces. Follows the eight-step cleaning procedure., • Washes walls, windows, furniture, baseboards and other items to maintain a clean, safe environment for patients, visitors and staff., • Seeks out areas requiring cleaning; takes initiative to complete the task., • Completes all tasks assigned by supervisor., • Performs tasks in accordance with all federal, state and county guidelines., • Strips, scrubs, buffs and refinishes floors; shampoos carpet., • Contributes to the team; exhibits professionalism with customers, fellow employees and others. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice and facility management industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. ESFM maintains a drug-free workplace. ESFM

Job Description • We have an opening for a full time JANITOR LEAD position., • Location: Sysco - 131 Sysco Court, Columbia, SC 29209 Note: online applications accepted only., • Schedule: Full time; days & hours may vary, more details upon interview., • Requirement: Prior supervisory and warehouse janitorial experience is required. Experience working in a cold/refrigerated environment is preferred., • Fixed Pay Rate: $18.00 per hour ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the International WELL Building Institute (IWBI). We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1477733. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Rooted in hospitality, ESFM elevates the workplace experience as the single source of innovative FM solutions that ensure a safe, healthy, and sustainable environment. ESFM’s clients include many household names from Life Science, Technology, Oil & Gas and Manufacturing markets. ESFM self-performs 80% of all IFM solutions provided to clients. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA). Job Summary Summary: Performs administrative tasks, trains team members and oversees overall training activities for custodial associates. Acts as a resource for others due to knowledge of cleaning methods, materials and heavy commercial cleaning equipment. Essential Duties and Responsibilities: • Conducts classroom and hands-on training on customer service, safety, compliance and company policies., • Conducts one-on-one training as needed., • Updates and provides training on use of janitorial equipment, PPE and chemical usage/safety., • Copies training material and revises material as needed; conducts administrative tasks as requested., • Provides feedback on new associates during orientation period; reviews trainee records to ensure successful compliance., • Provides recommendations to training coordinator for disciplinary action as appropriate., • Performs reviews, i.e., monthly safety performance review, in order to ensure compliance with OSHA, Risk Management and other applicable company/federal/state/local requirements and policies., • Performs walk-through building inspections as required. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice and facility management industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. ESFM maintains a drug-free workplace. ESFM

What you will do Johnson Controls the leading Building Technology OEM for Healthcare, Manufacturing, Higher Education, K12 and Commercial Real Estate is seeking skilled HVAC Servicemen to join our growing business. Johnson Controls offers competitive pay and benefits. This opportunity offers the chance to commission, service and maintain the most advanced commercial equipment in the world. As a trusted advisor to our customers, you will consult with our customers on comfort, building inefficiency and other service-related issues. How will you do it We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement. You will have direct access to Factory Technical Support. We will equip you with the safety equipment, uniforms, tools, cell phone, technical equipment and vehicle required for your job. Servicemen must have two years practical working experience in residential, light commercial or commercial mechanical equipment. You may be required to satisfactorily pass an examination to identify your skills and knowledge. Servicemen may assist Journeymen in the repair and service of centrifugal, absorption, screw and scroll chillers. You will perform maintenance, repair and replacement services on commercial heating and cooling systems and recommend solutions to ensure facilities are running efficiently. You will identify enhancements that will provide customer systems reliability and sustainability at the time of service and provide labor and material quotes to support your recommendations. We provide incentives for executed recommendations you quote. You will participate in weekend, night, and holiday call out service on a rotating basis. What we look for Required * Adherence to the company Safety Program. * High School Diploma or equivalent. * Two (2) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry. * Demonstrated knowledge of the maintenance and repair of three phase Commercial HVAC equipment, RTU’s, Heat Pumps and Fans. * A valid driver’s license. * EPA Universal Refrigerant Certification required. * Good verbal and written communication skills. Preferred * Five (5) years of Commercial and or industrial work experience in the HVAC industry. * Demonstrated knowledge of the maintenance and minor repair pumps, VFD’s, Air Handling Units, and Rooftop units. Pay Range: $30.59 hourly rate determined by the CBA/rate sheet. Benefits are provided through a local labor union aligned with a collective bargaining agreement. #TechHiring #TechHiring

Job Description School Custodian Keeps educational facilities clean, safe, and functional by performing daily cleaning (sweeping, mopping, dusting, sanitizing restrooms, emptying trash), setting up for events, handling minor repairs (light bulbs, fixtures), reporting issues, and sometimes managing grounds/snow removal, ensuring a healthy learning environment for students and staff . Key Responsibilities: • Cleaning & Sanitation: Sweep, mop, vacuum, dust, and sanitize classrooms, offices, hallways, gyms, cafeterias, and restrooms. Replenish soap, paper towels, etc., in restrooms., • Waste Management: Empty and clean trash and recycling bins., • Floor Care: Clean, strip, wax, buff, and refinish floors; shampoo carpets., • Minor Maintenance: Replace light bulbs, fix minor issues with fixtures, report major repairs needed., • Building Security: Lock/unlock doors, windows, and gates; set alarms; ensure overall safety., • Event Support: Set up and break down furniture and equipment for meetings, events, and activities., • Groundskeeping (as needed): Sweep sidewalks, pick up debris, potentially mow or shovel snow., • Reliability & Detail-Oriented: Dependable, conscientious, and focused on thoroughness., • Physical Stamina: Capable of heavy lifting, pushing, pulling, and physical activity., • Safety Awareness: Understands and follows chemical handling, health, and safety regulations., • Teamwork: Works effectively with staff and other custodial team members., • Problem-Solving: Ability to handle unexpected spills or issues. Company DescriptionHireQuest Inc. is a franchisor of on-demand staffing and professional recruiting solutions. We are led by 120+ years of industry experience and are a publicly traded company (HQI on Nasdaq). To date, you can find our 200+ staffing branches in 36 states and Washington, D.C., under brand names including HireQuest Direct, HireQuest, and Snelling Staffing. Staffing offices under the HireQuest Inc. umbrella provide temporary and direct-hire services in a number of industries, including construction, light industrial, healthcare, hopsitality, admin/clerical, IT, legal, accounting, and more.HireQuest Inc. is a franchisor of on-demand staffing and professional recruiting solutions. We are led by 120+ years of industry experience and are a publicly traded company (HQI on Nasdaq). To date, you can find our 200+ staffing branches in 36 states and Washington, D.C., under brand names including HireQuest Direct, HireQuest, and Snelling Staffing. Staffing offices under the HireQuest Inc. umbrella provide temporary and direct-hire services in a number of industries, including construction, light industrial, healthcare, hopsitality, admin/clerical, IT, legal, accounting, and more.

Job Description Aircraft Upholsterer Reporting To: Paint & Interior Manager Working Hours: Monday – Friday, 7:00 AM – 4:00 PM Work Location: Columbia Metropolitan Airport (KCAE) in West Columbia, SC About Eagle Aviation Eagle Aviation is a premier Fixed-Base Operator (FBO) in Columbia, South Carolina, with a rich history of over 55 years in the aviation industry. We specialize in aircraft sales, maintenance, and support services, consistently delivering high-quality solutions tailored to our clients' needs. Our team is driven by a passion for aviation and a dedication to providing exceptional service. Become part of our team and help us continue our legacy of setting new standards in quality and service in the aviation industry. Job Description Eagle Aviation is seeking an experienced Aircraft Upholsterer to join our team, specializing in high-end private aircraft interiors. This role is responsible for refurbishing, repairing, and customizing aircraft seating and upholstery, ensuring top-tier craftsmanship and compliance with aviation standards. The Aircraft Upholsterer will handle all aspects of seat restoration, including material selection, cutting, sewing, padding, and finishing. The ideal candidate will have experience in aviation, automotive, or marine upholstery and demonstrate strong sewing and patterning skills. Key Responsibilities: · Perform upholstery refurbishment and restoration on private jet interiors, including seats, panels, and soft goods. · Remove and reinstall aircraft seats and interior components as needed. · Work with high-quality materials such as leather, vinyl, fabric, and foam to achieve luxury finishes. · Demonstrate advanced sewing techniques, pattern-making, and cutting for precise fits. · Ensure all work meets FAA regulations and Eagle Aviation’s high-quality standards. · Collaborate with the aircraft maintenance and completions teams to align upholstery work with project timelines. · Maintain a clean and organized work environment, adhering to safety protocols. Job Requirements · Minimum 5+ years of experience in upholstery refurbishment, preferably in aviation, automotive, or marine industries. · Strong sewing, patterning, and material application skills. · Ability to lift 50+ lbs and work in confined spaces, including kneeling, stooping, and laying down. · Proficiency with industrial sewing machines, cutting tools, and upholstery adhesives. · Attention to detail and commitment to craftsmanship. · Ability to provide a portfolio or demonstrate upholstery skills as part of the hiring process. Compliance · Must be at least 18 years old. · Must be able to pass drug screening and TSA background screening. · Must have a valid Driver’s License with reliable transportation. Benefits Overview Eagle Aviation offers a comprehensive benefits package that includes significant employer contributions toward medical, vision, and basic life insurance coverage for eligible employees. Voluntary options such as dental, short-term and long-term disability, additional life insurance, and flexible spending accounts (with available employer contribution) are also available. Employees can take advantage of a 401(K) plan with employer matching and a generous PTO program. Compensation Competitive salary commensurate with experience. Company DescriptionEagle Aviation is a premier, full-service FBO centrally located on the eastern seaboard in Columbia, South Carolina, with bases at both the Columbia Metro (KCAE) and Jim Hamilton - L.B. Owens Airport (KCUB). We have been providing aircraft sales and services to aviation clients around the world since 1967, and have worked tirelessly to earn our reputation for excellence. We’ve become a known and trusted name in sales, maintenance, completions, parts support and line service. Regardless of the reason of your visit, you can rest assured that the Eagle Aviation team will provide you with a professional and gratifying customer experience, time and time again. JOIN USEagle Aviation is a premier, full-service FBO centrally located on the eastern seaboard in Columbia, South Carolina, with bases at both the Columbia Metro (KCAE) and Jim Hamilton - L.B. Owens Airport (KCUB). We have been providing aircraft sales and services to aviation clients around the world since 1967, and have worked tirelessly to earn our reputation for excellence. We’ve become a known and trusted name in sales, maintenance, completions, parts support and line service. Regardless of the reason of your visit, you can rest assured that the Eagle Aviation team will provide you with a professional and gratifying customer experience, time and time again. JOIN US

Job Description NICET II Fire Sprinkler Technician – U.S. Army Base Fort JacksonCompetitive Wages and an INSURANCE ALLOWANCE! Top reasons to work at EMI Services, a subsidiary of TechFlow: • NICET testing fee reimbursement, • Tuition reimbursement, • Health Care Plan - Medical, Dental & Vision Fire Sprinkler Technicians on the EMI Services Fort Jackson team come from all areas of Columbia, South Carolina. The primary responsibility of the Fire Sprinkler Technician is to Install, repair, and replace fire sprinkler devices including but not limited to post-indicator valves, outside stem and yoke valves, waterflow switches, tamper switches, sprinkler heads, and stock boxes. The Fire Sprinkler Technician performs fire pump testing and makes repairs as needed as well as responds to emergency service calls. The ideal EMI Fire Sprinkler Technician must be NICET II Certified and experienced in both residential and industrial/commercial facilities. Salary $30.04 to $50.00/hr. (DOE and certifications) plus $4.93 fringe benefits used towards insurance and 401k! See ALL the fantastic benefits you receive as an employee of EMI below!! Key Responsibilities • Cut, thread, assemble and bond all pipes and tubes to ensure they pass every fire inspection, • Perform inspections to ensure Fire Sprinkler systems are according to code, • Perform Preventive Maintenance and repairs, • Complete detailed inspection reports, • document any issues, • Provide preliminary cost estimates for materials and services, • Maintain current license and identification to meet government regulations, • Respond to emergency service calls, • Knowledge of applicable state and federal laws and building codes and regulations, • Proficiency in the use of test equipment, • multi-meters and digital analyzers, • Knowledge of all fire safety codes and regulations, • Able to read and understand installation manuals, • Adaptable and flexible in work situations, • Prioritizes tasks to ensure completion in a timely manner., • PRACTICES WORKPLACE SAFETY in the use of tools, equipment, and supplies used in repair of HVAC equipment., • Including proper use of personal protective equipment (PPE) Requirements • High school diploma or equivalent, • 3+ years of experience - MUST include industrial or commercial facilities, • NICET II certification, • Working knowledge of NFPA standards (including 70 and 72), • Valid driver’s license compliant with REAL ID Act or are you willing and able to obtain one, • Pass a pre-employment drug screening and back ground check, • Regular, dependable attendance, • U.S citizenship to obtain and maintain access to military installations Physical Requirements • Must be able to lift up to 50lbs unassisted, • Use of hands, reaching with hands and arms, talking, and walking, • Prolonged periods of sitting, bending, squatting, standing, twisting, or stooping, • Climbing ladders and entering confined spaces - frequently work on ladders and scaffolds, • May spend long hours outside and in awkward positions which can cause physical discomfort and strain - may stand for long periods, • Electricians risk injury from electrical shock, falls, and cuts, • Work both indoors and outdoors in various temperatures (some extreme) and weather conditions, • Physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Click here to follow EMI Services on Facebook Benefits As a team member at EMI, you’ll enjoy: • Generous benefits package consistent with the Service Contract Act, • Insurance Allowance, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Employee Stock Ownership Plan (ESOP), • Company Vehicle for Local Commute, • Paid Time Off (Vacation, Sick & Federal Holidays), • Short Term and Long Term Disability, • Term Life Insurance, • Safety Allowance, • Uniforms, • Tuition Reimbursement, • NICET testing fee reimbursement, • Non-seasonal- always steady work, • Referral program- Join our team then bring your friends What Sets EMI Apart EMI is an industry-leading provider of DOD base operation support services, facilities maintenance, and logistics. Our goal is to contribute to the repair and maintenance of buildings and equipment. EMI consistently delivers cost-saving through best value innovations and quality service that exceeds our clients’ expectations. The Right Partner: EMI has grown by gaining our customers’ trust and our employees’ loyalty. We’ve successfully performed over 60 service contracts and we understand the unique challenges facing today’s military. We offer exceptional responsiveness and a strong commitment to customer satisfaction. We demonstrate this commitment by consistently earning some of the highest customer satisfaction ratings in the industry. The Right Team: The EMI team includes over 250 high-achieving professionals, administrative and trades personnel deployed in various locations throughout the United States. At times, we augment our in-house capabilities with proven and capable business partners. The Right Approach: EMI brings vast expertise and proven solutions to augment our clients’ operations. We provide a platform that delivers seamless mission support and exceptional customer service in a very cost-effective and repeatable solution. #emiservices

Job Description Job Title: HVAC and Chiller Service Technician Status: Full Time, Non-Exempt (Eligible for overtime) Reports To: Area Manager Work Schedule: Monday – Friday- based on customer needs.. Position Purpose: The primary purpose of this HVAC and Chiller Service Technician is to provide preventative maintenance, start-up, warranty, and repair services on light commercial and industrial air conditioning equipment. Strong emphasis on customer service. This position may occasionally involve after hour call outs in order to provide emergency repairs. Hoffman Mechanical Solutions, Inc. is a company focused on being #1 in the HVAC industry in providing the most innovative HVAC solutions through superior design and customer service. HVAC Service Technician Essential Duties and Responsibilities: • Perform assigned chiller maintenance and troubleshooting tasks in industrial and commercial settings (e.g., manufacturing, healthcare, educational buildings), • Service, diagnose, and troubleshoot various types of chillers, • Service a variety of HVAC products and equipment and ensure customer satisfaction., • Read and understand blueprints, equipment manuals, and engineering specifications in order to properly diagnose and repair units., • Use a variety of hand-tools and specialty equipment typical of the commercial HVAC Service trade., • Identify, analyze, diagnose, and repair systems and products at customer’s location., • Survey customer site for properly operating equipment and report any deficiencies found. Provide sales leads to internal associates as necessary., • Perform preventative maintenance, site surveys, replacement, and modifications as needed or requested by customers., • Prepare in advance for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials, and coordinating various trades for on-site work., • Diagnose/troubleshoot inoperable equipment and develop action plan for repairs and problem resolution., • Determine replacement parts required, secure materials, and complete repairs on a timely basis. Return any non-used or refundable parts for credit., • Interact face to face with customers to ensure proper and accurate communications exist., • Document all work performed by accurately completing field service reports, equipment log sheets, etc., • Complete and submit all required paperwork on a timely basis., • Operate and be diligent in properly caring for and maintaining a company vehicle., • Provide technical support to customers., • Flexible to work overtime/weekends as necessary in order to meet customer requirements., • Limited travel required but may include occasional overnight stays., • Stay informed on industry news and trends, products, services, competitors and relevant information about existing and emerging technologies, and the latest product-line developments. Attend company training seminars to become familiar with product lines. Knowledge / Experience / Critical Skills • Education/Experience – Associate’s Degree or equivalent from a Technical / Trade School with a certificate in Heating, Ventilation, and Air Conditioning., • Minimum of Five (5) years related experience preferred., • Operational knowledge of computers and Microsoft Office software preferred., • Ability to read, comprehend, and write simple instructions and short correspondence. Ability to effectively present information in one-on-one and small group situations., • Ability to add, subtract, multiply, and divide in all units of measure, using whole number, common fractions, and decimals. Ability to compute rate, ratio, and percentages. Ability to understand data presented in a graphical format such as pie charts, bar graphs, etc., • Ability to recognize problems and develop the most cost effective solution. Ability to collect data, establish facts, and draw valid conclusions., • Must pass pre-hire requirements including background check, motor vehicle report, and drug screening., • Must possess valid drivers’ license., • In order to properly perform the duties of this job, the employee is regularly required to stand, use hands in order to finger/grasp/handle/feel, talk, and hear. The employee frequently is required to walk, reach, stoop, kneel, crouch, and/or crawl. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 75 pounds. This positions requires close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. No phone calls or drop-ins, please. EEO Employer/Vets/Disabled

Job DescriptionKey Responsibilities: * Respond to roadside and on-site service calls using a fully equipped service truck. * Mount, dismount, balance, and repair all types of tires, including passenger, light truck, commercial truck, and industrial. * Diagnose and repair tire-related issues and perform light mechanical repairs as needed. * Inspect tires and wheels for wear, damage, and proper inflation. * Perform fleet inspections and preventative maintenance checks when required. * Operate tire pressure monitoring systems (TPMS) and other diagnostic tools. * Maintain the service truck, tools, and equipment in safe operating condition. * Follow DOT regulations, company safety policies, and traffic laws at all times. * Provide exceptional customer service, including clear communication of service details and timelines. * Assist with warehouse or shop duties when not on service calls. Skills / Education / Requirements: * Must be at least 18 years of age. * Must pass a pre-employment drug screen. * Valid driver’s license with an acceptable driving record (CDL preferred but not required). * Experience with heavy-duty/commercial tires preferred, but not required. * Ability to lift and move tires weighing 30–250 lbs., with or without mechanical assistance. * Capable of working independently in various weather and road conditions. * Strong problem-solving and customer service skills. Benefits: * 401(k) with Company Match * Health Insurance * Dental, Vision, and Life Insurance * Paid On-the-Job Training * Career Advancement Opportunities Why Join Southern Tire Mart? * * #1 Commercial Tire Dealer in the U.S. since 2008 * #1 Truck Retreader in North America since 2007 * #1 North America Commercial Tire Dealer since 2012 * Family-owned company with a focus on safety, service, and employee growth #INDEEDMSVTM

Job DescriptionKey Responsibilities: * Mount, balance, rotate, and repair tires across various vehicle types: passenger cars, light trucks, large trucks, and industrial vehicles. * Diagnose and repair mechanical issues on semi-trucks and trailers, including: * Commercial Tires * HVAC systems * Brakes * Steering & Suspension * PM Inspections * Drivetrain * Electrical Systems * Conduct fleet inspections and routine maintenance. * Operate company vehicles safely and in compliance with all traffic regulations. * Respond to roadside service calls using a service truck (F-350), when needed. * Use and maintain Tire Pressure Monitoring Systems (TPMS). * Assist with inventory loading, unloading, and physical counts. * Participate in ongoing training, follow safety protocols, and uphold company policies. * Perform other duties as assigned. Skills, Education & Requirements: * Must be at least 18 years of age. * Must pass a pre-employment drug screen. * Valid driver's license with a clean driving record required. * Experience with heavy-duty or commercial tires preferred (not required). * Ability to lift/move tires weighing between 30–250 lbs., with or without mechanical aids. * Ability to perform physically demanding work involving repetitive motion, forceful exertion, and working in awkward postures or under vibration. Benefits: * 401(k) and 401(k) Matching * Health, Dental, Vision, and Life Insurance * Paid On-the-Job Training * Career Growth Opportunities Why Join Southern Tire Mart? * #1 North America Commercial Tire Dealer since 2012 * #1 Truck Retreader in North America since 2007 * #1 Commercial Tire Dealer in the US since 2008 * Best-in-class service for America’s favorite tire brands

Job Description Classification: Non-Exempt payrate range is $25-$28 per hour. We are Alsco Uniforms. We’ve been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It’s our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We’re seeking driven professionals with ambition to grow within our company. We’d love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Technician is responsible for installing, repairing and maintaining large industrial textile processing equipment, as well as facility maintenance. Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems. This position reports to the Chief Engineer. Our full-time employees enjoy: 401K Plan with Company Match Medical, Dental, Vision, FSA/HSA Life Insurance, Disability Insurance Vacation, Sick Time, Holidays Choice of Global Cash Card or Direct Deposit Career Advancement Learning & Development Opportunities Inclusive and Diverse Team Environment Essential Functions: • Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems., • Troubleshoots electrical issues., • Responds to daily maintenance requests in a timely fashion to minimize equipment downtime., • Provides emergency/unscheduled repairs of production equipment., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Looks for opportunities to continually improve maintenance processes., • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Maintains technical knowledge by attending educational workshops and reviewing technical publications. Remains current on equipment and repair procedures and best practices., • Studies blueprints and manufacturers’ manuals to determine correct operation of machinery., • Proficient in reading electrical schematics., • Maintains accurate and timely records of maintenance performed., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver’s license and driving record free of chargeable accidents, speeding or other safety violations., • Minimum of two years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Proficient in the proper use of power and hand tools., • Strong electrical troubleshooting ability of 3 phase 230 volt systems., • PLC programming experience., • Experience in carpentry, boiler repair, welding, and general facility repairs., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management, • High school graduate or equivalency preferred., • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. The Maintenance Technician must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 09/11/2024

Job Description The Maintenance Technician is responsible for safely maintaining, repairing, replacing, and modifying all processing, packaging and facility equipment with optimal quality and efficiency. Mechanic C is responsible for maintaining the operational readiness of the FR system using various systems and multiple technical strategies and similar control technology. Responsible for record keeping of chemical use, on site chemical inventories, assisting with bulk chemical deliveries and rinsing of chemical containers when emptied. Actively participates in the development and delivery of various training plans to ensure proper execution of system requirements. Performs a variety of technical troubleshooting and repair activities to ensure proper functioning of technical equipment and system reliability for FR equipment, Industrial Waste (IW) controls and related ancillary systems. Responsible for the neutralization system for chemical mixing room and ensuring correct pH levels are achieved before discharge to the IW system. Duties and Responsibility: • Ability to operate our CMMS system and demonstrate 100% functionality to complete work orders as well as log corrective maintenance issues in the system., • Ability to effectively communicate with Production and other mechanics to identify problematic areas of concern; provide and receive feedback and/or support through collection and analysis of information., • Maintain equipment and perform basic mechanical tasks to keep equipment in optimal operating condition; ability to repair 40% of equipment without direction., • Perform some electrical repairs including AC & DC motor controls, solid state motor controls, advance circuits, and grounding diagrams; ability to test equipment within skill range., • Ability to read and understand schematics, drawings, and manuals to establish facts and draw a valid conclusion., • Ability to demonstrate mechanical, electrical, hydraulic, and pneumatic troubleshooting skills., • Must demonstrate an understanding of the company's objectives including productivity, yields, food safety, quality, customer service and cost goals; daily work activities should support achieving those goals., • Ability to demonstrate computer and math skills as part of daily activities such as fractions, decimals, percentages and the metric system, efficient with metric system, ratios, and formulas., • Perform daily inspections, emergency repairs, routine adjustments, and follow periodic preventive maintenance schedule., • Model professional workplace conduct and adherence to company policies such as the Code of Conduct, attendance, punctuality, efficient and productive work habits, and good personal hygiene., • Perform other duties as required or assigned., • Performs chemical mixes for batch creation as needed, • Performs process and mix batch testing as needed, • Maintains the validation and operation of the FR system and its components including but not limited to load cells, probes and chemical dosing pumps., • Responsible and accountable for production equipment effectiveness and reliability relative to assigned FR mixing systems and production equipment, • Must work effectively in a team setting., • Must demonstrate a basic ability to cross-train other mechanics as well as production personnel., • Knowledge of Microsoft computer programs, Outlook, Word, Excel. (Ability to enter data into the system)., • Ability to use Computerized Maintenance Management System to track orders, PMs, and inventory., • Achieve a passing score on the Ramsay exam., • Ability to read, write and speak English is required., • Capable of working in a cold (34 degrees F) and wet environment., • 1-3 years' experience with industrial equipment {or 1 years of technical training}, preferably in a food processing facility., • Familiar with preventive or reliability-based maintenance. The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed, as an exhaustive list of responsibilities, duties and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Job Posted by ApplicantPro

Job Description The Nuclear Company is the fastest growing startup in the nuclear and energy space creating a never before seen fleet-scale approach to building nuclear reactors. Through its design-once, build-many approach and coalition building across communities, regulators, and financial stakeholders, The Nuclear Company is committed to delivering safe and reliable electricity at the lowest cost, while catalyzing the nuclear industry toward rapid development in America and globally. About the role As our Chief Technology Officer (CTO), you will be responsible for driving the overall technology vision, product architecture, and engineering execution across both hardware and software domains. This role is ideal for a dynamic technical leader with a strong background in engineering design, experience scaling industrial or tech-based companies, and a passion for solving highimpact energy challenges Responsibilities • Technology Strategy: Define and drive the company's technical vision, product architecture, and R&D priorities across nuclear systems, automation, and digital platforms., • Team Leadership: Build, scale, and mentor a world-class engineering team across hardware (mechanical, nuclear, electrical) and software (controls, embedded systems, simulation)., • Product Development: Oversee end-to-end product development, including design, prototyping, testing, iteration, and scaling into production., • Design Excellence: Lead or supervise the design of reactor components, robotics systems, automation tools, and software platforms with a strong focus on safety, reliability, and manufacturability., • Robotics & Automation: Spearhead the integration of robotics and automated systems for maintenance, diagnostics, and deployment within nuclear environments., • Scaling & Industrialization: Develop scalable manufacturing, automation, and deployment strategies for transitioning from prototype to production and field implementation., • Supply Chain Optimization: Lead the development and optimization of the upstream supply chain for critical nuclear reactor components—ensuring quality, traceability, cost efficiency, and supplier reliability., • Cross-functional Collaboration: Partner closely with regulatory, commercial, and operations teams to ensure alignment with licensing, compliance, and market needs., • Risk Management: Evaluate and mitigate technical and regulatory risks, ensuring engineering practices are compliant, innovative, and future proof. Required: • Proven leadership experience as CTO, VP of Engineering, or similar at a technology, industrial, or energy company., • 15+ years in hardware/software engineering, with a strong track record of designing and scaling complex systems., • Deep experience in robotics and automation, preferably in high-reliability or mission critical applications., • Background in industrial design, mechanical systems, or nuclear technologies with demonstrated systems-level thinking., • Experience taking products from R&D through prototype, testing, production, and deployment., • Strong understanding of engineering best practices, safety standards, and regulatory environments in the energy or industrial sector., • Experience in the nuclear energy sector, or in regulated industries with complex safety and compliance requirements., • Familiarity with embedded systems, control software, AI/ML for automation, and digital twins., • Competitive compensation packages, • 401k with company match, • Medical, dental, vision plans, • Be part of a purpose-driven company aiming to decarbonize the planet., • Lead the technology strategy for one of the most ambitious energy startups., • Work with a highly collaborative, mission-aligned team. Export Control Certain positions at The Nuclear Company may involve access to information and technology subject to export controls under U.S. law. Compliance with these export controls may result in The Nuclear Company limiting its consideration of certain applicants.

Job DescriptionMaintenance Mechanic Potential Annual Income: $60,000–$86,000 Potential Annual Income is calculated based on an annualized hourly rate which includes shift differential, overtime and annual bonus. Actual annual income may vary. Starting hourly pay is dependent on experience. Now Paying Hiring Bonus: $5,000 in the first year of employment! $3 shift premium for working nights and weekends! There’s more to CMC than our steel products and the buildings, structures, and roads they go into. At CMC, it’s the people inside our recycling centers, fabrication plants, steel mills and offices that make us who we are as a company. Our success comes from finding, retaining, and supporting the highest quality talent by offering: • Day 1 benefits coverage with low cost medical, vision, dental, • Paid-time off and vacation starting Day 1, • Competitive compensation and bonuses, • Company-paid Lifestyle fund, life and disability insurance, • Company matching 401(k) plan, • Employee stock purchase plan, • Participates in the CMC Safety Programs and proactively upholds the CMC Safety Culture, • Diagnose malfunctioning systems, apparatus, and components using test equipment, hand tools and personal knowledge to determine root cause, • Use SAP maintenance module in the execution of duties, utilize computers to acquire information, documentation, account for time and corrective actions, • Demonstrates dependability in attendance, work completion, and flexibility to meet business needs, • Determine grades and sizes of bolts, pipes, tubing, cables, and wires, • Interpret blueprints, drawings, and schematics, • Meet expectations of work quality, • Monitor and inspect equipment for defects. Properly remove defective parts by dismantling devices using hoists, overhead cranes, hand, and power tools, • Possess specific fundamental knowledge of bearings, power transmission equipment, hydraulics/pneumatics, lubrication, welding principles, rigging, overhead cranes, gearboxes, and mobile equipment operation, • Prepares mechanical maintenance reports by collecting, analyzing, and summarizing information and trends, • Work safely to prevent on the job injuries by following safety rules and regulations at all times including proper wearing of company PPEWhat You'll Need, • Ability to stand, walk, bend, and work in heights for extended periods of time in extreme temperatures, • Ability to utilize precision measurement instruments, • Ability to work rotating shifts which include weekends and holidays, • Experience with welding, cutting, fabrication, and equipment maintenance preferred, • Minimum 5 years of experience with welding, cutting, fabrication, and equipment maintenance preferred, • Minimum 5 years of field experience in either heavy industrial operations and/or manufacturing environment requiredYour Education If you’re ready to reimagine ways to make the steel industry more sustainable, reinforce the bridges and roadways connecting our communities, and do meaningful work, you’re ready to joinCMC. Apply today and start moving your career — and our world — forward. CMC is committed to providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, age, physical or mental disability, national origin, citizenship, military or veteran status, sexual orientation, gender identity and/or expression, genetic information, or other status protected by federal, state or local law. You should be proficient in: • PLC Troubleshooting Skills, • Heavy Equipment Repair, • Equipment Troubleshooting, • Facilities Maintenance Experience, • Electrical Troubleshooting Skills, • Troubleshooting Industrial Automation Equipment, • Troubleshooting CNC Machines, • Programmable Logic Controller (PLC) (Allen Bradley), • Conveyor Systems

Job Description Tri-State Overhead Crane continues to grow our customer base and expand into new areas, and we on the lookout for a strong service technician to be part of our team in the Columbia, SC area! We are headquartered in St. Louis with service locations primarily in the Midwest, but customers covering coast to coast. We have 110 employees, so a good size, not too small and not too corporate. We are different in that we design, build/fabricate, install, and inspect/service/repair overhead cranes, so we can cover them through a full life cycle. Keep reading to find out more about the role and the types of skills we look for! As a Service Technician you will run electrical and mechanical diagnostics and deliver required repairs onsite at customer locations. Key responsibilities are going to be troubleshooting and repairing overhead cranes, crane controls, hoists and drives; performing scheduled preventive maintenance activities on equipment; and comprehensive quality inspections of overhead industrial cranes and hoists. You'll need to be able to read and understand work instructions, manuals, schematics, and fabrication drawings. A minimum of 3-5 years of work experience as a technician or mechanic in an industrial environment working on equipment is going to have you on the right path. For this role, we would prefer experience working on overhead cranes, that will allow you to jump right in. The role will work on its own at times, and at other times connect with other techs on assignments. We provide a work vehicle, company credit card and company phone to help you get things done. As an employee you get benefits (medical with an HSA option, dental, vision, voluntary short/long term disability and life insurance, and 401(k) with match), plus PTO and Sick Leave. One of the medical plans we offer is even free for employee coverage! It is a physical job, so a few expectations. There will be prolonged periods standing and performing repetitive tasks. You will need to frequently walk, climb, kneel, bend, reach overhead, push, pull, and use a ladder or lift. You might have to be able to lift and move up to 50 pounds at a time. There will be plenty of times you will be exposed to heat, cold, noise and heights. And of course, you must wear proper personal protective equipment (PPE). Hit the apply button if all that sounds like something you are interested in and have the skillset for! We'd love to talk with you! We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description Cyclic General Maintenance Worker - U.S. Army Fort JacksonCompetitive Wages and an INSURANCE ALLOWANCE! Top reasons to work at EMI Services, a subsidiary of TechFlow: • Paid time off- Vacation, Sick & Federal Holidays, • Non-seasonal- Always steady work Cyclic General Maintenance Workers on the Fort Jackson team come from areas of Columbia. Primary responsibilities of the Cyclic General Maintenance Worker overall include performing general maintenance, preventative maintenance, and repairs on buildings, equipment and machinery in various trades. The ideal EMI Cyclic General Maintenance Worker has the practical skill and knowledge in various trades such as grounds work, painting, carpentry, plumbing, masonry, HVAC and electrical work. Salary $20.87/ hr. plus $4.93 fringe benefits used towards insurance and 401k! See ALL the fantastic benefits you receive as an employee of EMI below!! Key Responsibilities • Work involves a variety of the following duties but is not all inclusive: replace broken hardware in a barracks room, working on signage, replacing electrical receptacles, wires, switches, fixtures, and motors, using plaster or compound to patch minor holes and cracks in walls and ceilings, repairing or replacing sinks, water coolers, and toilets, • Repair or replace defective equipment parts and reassemble equipment, • Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate, • Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment, • Order parts, supplies, and equipment from catalogs and suppliers, or obtain them from storerooms, • Perform general cleaning of buildings or properties, • Perform other related duties as assigned Essential Skills • Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices, • Adjust functional parts of devices or control instruments- use hand tools, levels, plumb bobs, or straightedges, • Knowledge of methods, materials, tools, and equipment used in both rough and finished carpentry in COMMERCIAL/INDUSTRIAL settings- such as applicable building and safety code requirements and methods and practices followed in the maintenance of tools, machinery, and equipment, • Knowledge of building architectural/structural elements - including alterations and repairs, • Adaptable and flexible in work situations, • Establish priorities to ensure completion of tasks in a timely manner, • PRACTICES WORKPLACE SAFETY in the use of tools, equipment, and supplies - Including proper use of personal protective equipment (PPE) Requirements • High school diploma or equivalent, • 2+ years related experience and/or formal vocational/technical training in a variety of building and/or utility trades, • Duty Phone, • Valid driver’s license compliant with REAL ID Act or are you willing and able to obtain one, • Pass a pre-employment drug screening and background check, • Regular, dependable attendance, • U. S. citizenship to obtain and maintain access to military installations Preferred Qualifications • Formal apprenticeship Physical Requirements • Must be able to lift up to 50lbs unassisted, • Use of hands, reaching with hands and arms, talking, and walking, • Prolonged periods of sitting, bending, squatting, standing, twisting, or stooping, • Climbing ladders and entering confined spaces, • Lifting and adjusting heavy objects, contact with sharp, hot and/or very cold supplies and equipment., • Work both indoors and outdoors in various temperatures (some extreme) and weather conditions, • Physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Click here to follow EMI Services on Facebook Benefits As a team member at EMI, you’ll enjoy: • Generous benefits package consistent with Service Contract Agreement, • Insurance Allowance, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Employee Stock Ownership Plan (ESOP), • Paid Time Off (Vacation, Sick & Federal Holidays), • Short Term and Long Term Disability, • Term Life Insurance, • Safety Allowance, • Uniforms, • Tuition Reimbursement, • Non-seasonal- always steady work!, • Referral program- Join our team then bring your friends What Sets EMI Apart EMI is an industry-leading provider of DOD base operation support services, facilities maintenance, and logistics. Our goal is to contribute to the repair and maintenance of buildings and equipment. EMI consistently delivers cost-saving through best value innovations and quality service that exceeds our clients’ expectations. The Right Partner: EMI has grown by gaining our customers’ trust and our employees’ loyalty. We’ve successfully performed over 60 service contracts and we understand the unique challenges facing today’s military. We offer exceptional responsiveness and a strong commitment to customer satisfaction. We demonstrate this commitment by consistently earning some of the highest customer satisfaction ratings in the industry. The Right Team: The EMI team includes over 250 high-achieving professionals, administrative and trades personnel deployed in various locations throughout the United States. At times, we augment our in-house capabilities with proven and capable business partners. The Right Approach: EMI brings vast expertise and proven solutions to augment our clients’ operations. We provide a platform that delivers seamless mission support and exceptional customer service in a very cost-effective and repeatable solution.

Job Description HVAC General Maintenance Worker- U.S. Army Base Fort JacksonCompetitive Wages and an INSURANCE ALLOWANCE! Top reasons to work at EMI Services, a subsidiary of TechFlow: • Paid Time Off - Vacation, Sick & Federal Holidays, • Non-seasonal- Always steady work EMI Services is hiring an HVAC General Maintenance Workers (GMW) to perform general maintenance and repair of HVAC equipment requiring practical skill and knowledge (but not proficiency) in the HVAC trade. Work involves a variety of the following duties: replacing belts, pulleys, wires, switches and clean equipment and perform preventative maintenance according to a checklist. This list is not all inclusive and the HVAC GMW’s primary responsibilities overall include performing general maintenance, preventative maintenance, and repairs of equipment and machinery in various trades. Salary $20.87/ hr. plus $4.93 fringe benefits used towards insurance and 401k! See ALL the fantastic benefits you receive as an employee of EMI below!! Key Responsibilities • Inspect, operate, or test machinery or equipment to diagnose machine malfunctions, • Record type and cost of maintenance or repair work, • Clean or lubricate shafts, bearings, gears, or other parts of machinery, • Repair or replace defective equipment parts, • Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate, • Inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions, following checklists, • Dismantle devices to access and remove defective parts, • Order parts, supplies, and equipment, • Adjust functional parts of devices or control instruments, • Operate cutting torches or welding equipment to cut or join metal parts, • Inspect used parts to determine changes in dimensional requirement- use rules, calipers, micrometers, or other measuring instruments, • Maintain specialized HVAC equipment and machinery found in various commercial buildings, • Perform general cleaning of buildings or properties, • including debris removal, • Performs other related duties as assignedEssential Skills, • Knowledge of methods, materials, tools, and equipment used in HVAC in a commercial/industrial setting, • applicable building and safety code requirements, • methods and practices followed in the maintenance of tools, machinery, and equipment, • Use hand tools, measuring instruments and electrical and electronic testing devices such as meters, • Adaptable and flexible in work situations, • Prioritizes tasks to ensure completion in a timely manner, • PRACTICES WORKPLACE SAFETY in the use of tools, equipment, and supplies used in repair of HVAC equipment, • High school diploma or equivalent, • 2+ years related experience and/or formal vocational/technical training in a variety of building and/or utility trades, • Each complete year of accredited college education in a related field may be substituted for the equivalent number of years of required experience, • EPA Universal Refrigeration License, • Duty Phone, • Valid driver’s license compliant with REAL ID Act or are you willing and able to obtain one, • Pass a pre-employment drug screening and background check, • Regular, dependable attendance, • U. S. citizenship to obtain and maintain access to military installations Physical Requirements • Must be able to lift up to 50lbs unassisted, • Use of hands, reaching with hands and arms, talking, and walking, • Prolonged periods of sitting, bending, squatting, standing, twisting, or stooping, • Climbing ladders and entering confined spaces, • Lifting and adjusting heavy objects, contact with sharp, hot and/or very cold supplies and equipment, • Work both indoors and outdoors in various temperatures (some extreme) and weather conditions, • Physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Preferred Qualification • Formal apprenticeship Click here to follow EMI Services on Facebook Benefits As a team member at EMI, you’ll enjoy: • Generous benefits package consistent with Service Contract Agreement, • Insurance Allowance, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Employee Stock Ownership Plan (ESOP), • Paid Time Off (Vacation, Sick & Federal Holidays), • Short Term and Long Term Disability, • Term Life Insurance, • Safety Allowance, • Uniforms, • Tuition Reimbursement, • Non-seasonal- always steady work!, • Referral program- Join our team then bring your friends What Sets EMI Apart EMI is an industry-leading provider of DOD base operation support services, facilities maintenance, and logistics. Our goal is to contribute to the repair and maintenance of buildings and equipment. EMI consistently delivers cost-saving through best value innovations and quality service that exceeds our clients’ expectations. The Right Partner: EMI has grown by gaining our customers’ trust and our employees’ loyalty. We’ve successfully performed over 60 service contracts and we understand the unique challenges facing today’s military. We offer exceptional responsiveness and a strong commitment to customer satisfaction. We demonstrate this commitment by consistently earning some of the highest customer satisfaction ratings in the industry. The Right Team: The EMI team includes over 250 high-achieving professionals, administrative and trades personnel deployed in various locations throughout the United States. At times, we augment our in-house capabilities with proven and capable business partners. The Right Approach: EMI brings vast expertise and proven solutions to augment our clients’ operations. We provide a platform that delivers seamless mission support and exceptional customer service in a very cost-effective and repeatable solution. #emiservices

Job Description At CNG, we are owners. We empower every individual to make a significant impact — because every moment matters. Whether you’re starting your career journey or aiming for the next level, we foster a supportive environment where your contributions are valued and celebrated. Why Join CNG? Employee Ownership: Every employee receives equity shares, enabling you to participate in our company's growth and prosperity. Work-Life Balance: Our unique schedule allows for true work-life integration. Career Growth: Advance your career within our expanding network of manufacturing facilities with comprehensive training and development programs. Purpose-Driven Work: Help create sustainable packaging solutions that reduce food waste and protect our environment for future generations. The Role This role supports plant operations by performing essential mechanical and basic electrical maintenance tasks. The Maintenance Technician is responsible for troubleshooting equipment, completing preventative maintenance, and accurately documenting work using CMMS tools. This position requires strong mechanical aptitude, adherence to safe work practices, and the ability to grow technical skills under guidance from senior technicians. Schedule: Work only 15 days per month with our unique 2-2-3 schedule • Work: Monday & Tuesday - Off: Wednesday & Thursday - Work: Friday, Saturday, & Sunday, • Off: Monday & Tuesday - Work: Wednesday & Thursday - Off: Friday, Saturday, & Sunday, • Provide support for emergency or unplanned repairs of production equipment and auxiliary systems., • Troubleshoot basic to complex mechanical and electrical issues. Must show ability to get to the root cause and make and implement recommendations to improve reliability., • Perform Preventative Maintenance on production and support equipment and make recommendations for improvement., • Read and interpret equipment manuals and schematic prints (electrical, pneumatic, and mechanical) to perform required maintenance and service, • Record and submit accurate work order data and parts usage using the CMMS system, • May assist or support contractors on major installation or retrofit projects Essential Qualifications: • Minimum 5+ years of industrial maintenance experience, • Electrical experience is required, • Ability to work 12-hour shifts and lift up to 65 pounds, • Basic mechanical aptitude and comfort with measuring tools, • Strong communication skills and positive attitude, • Willingness to learn and adapt in a technical environment, • Training in Industrial Maintenance, Machine Repair, Automated Systems, or other similar skilled trades is desired along with 2 or more years of verifiable work experience in related fields., • 2-5 years of plastic extrusion experience Starting Salary: • Wages ranging from $25.00-$30.00, dependent on experience., • Employee Ownership – Become a company owner day 1!, • Full medical, dental, and vision insurance upon hire, • Holiday Pay, • Paid vacation, • 401(k) with company match, • Performance-based bonuses, • Tuition reimbursement Join a team where every voice matters, every contribution counts, and every employee shares in our success. Charter Next Generation is an Equal Opportunity Employer committed to creating an inclusive environment for all employees. Learn More About CNG: • Visit our careers page: cnginc.com/careers, • Discover our employee ownership program: cnginc.com/careers/employee-ownership, • See what makes us different: cnginc.com/careers/why-cng #Blythewood