Trabajos lean manufacturing en Orange, New JerseyCrear alertas

Job Description Position: Quality Assurance Manager (Food) Location: Clifton, New Jersey area Qualifications: • Bachelor's degree in Food Science or Engineering discipline (preferred)., • PCQI certified or SQF Practitioner with at least 3 years of experience., • Knowledge of Sanitation, Pest Control, HACCP, GMP, FSMA, BRC, USDA, FDA, GFSI, Non-GMO, Halal, and Kosher., • Liaison with R&D for New Product labeling and nutritional guidelines. Insure FDA regulatory compliance. Maintain Allergen Control program., • Review, Investigate and resolve Customer complaints by conducting root cause analysis and implementing corrective actions., • Provide employee training for Quality compliance of GMP, BRC, SQF, HACCP and Food Quality Safety., • Supervise Continuous Improvement, Lean Manufacturing, Six Sigma and 5S programs., • Oversee QA testing for all Production and Packaging lines. Manage 3rd party Audits and Laboratories., • Implement Traceability and Mock Recall procedures and practices.

Job Description Shop Foreman | Hybrid Millwork & Metal Location: Clifton, NJ (HQ) | Company: Aero Mfg Co Inc Reports To: VP of Manufacturing | Status: Full-Time, Union Benefits The Challenge: Build the Bridge Between Steel and Skin After 80 years of excellence in stainless steel fabrication, Aero Mfg Co is consolidating our Tennessee Millwork division to our New Jersey headquarters. We aren’t just moving equipment; we are building a premier Wood-Metal Integration Team from the ground up. We are seeking a Working Shop Foreman—a master of "Hybrid Fabrication"—to design the shop flow, recruit the crew, and set the craftsmanship standards for our high-performance, tube-frame foodservice products. Key Responsibilities • The "Gold Standard" Builder: Act as the lead fabricator on the floor. You will personally execute the inaugural units, mounting architectural wood, laminate, and solid-surface skins onto precision-welded stainless-steel skeletons., • Architect of Flow: Partner with the VP of Manufacturing to design the physical layout of the new millwork division. You will optimize the "Lean" movement of heavy frames from the welding bay through skinning, finishing, and QC., • Team Building: Recruit, vet, and train a new local crew of "Hybrid Builders." You aren’t just hiring cabinet makers; you are building a team that masters the intersection of dissimilar materials., • Zero-Tolerance Systems: Develop the "Hand-off" process. Ensure that when a steel frame hits your floor, every skin, hardware piece, and equipment cut-out fits with aerospace precision., • Expert Craftsman: 5–10+ years in Architectural/Commercial Millwork (Stadiums, Hospitals, Universities). You understand that "residential grade" doesn't cut it here., • Lead by Doing: You can out-build and out-troubleshoot anyone on the floor. You lead from the bench, not a desk., • Tube-Frame Savvy: You understand the unique physics of skinning metal—managing thermal expansion, weld-bead clearance, and ensuring flush seams on rigid frames., • Quality Obsessed: You build to NSF-grade expectations. You know that in foodservice, "sanitary" is just as important as "aesthetic." This is the "Best of Both Worlds." You get the financial stability and reputation of an 80-year-old industry giant, combined with the creative freedom of a startup. You set the culture. You pick the team. You build the future of our integrated product line. The Perks: • Full Union Benefits (Healthcare and Pension)., • Paid holidays, sick days, and vacation., • A "clean slate" workspace in our NJ Headquarters.

Our manufacturing client in Irvington, NJ is looking for a Manufacturing Engineer to support the rubber injection molding operations for medium voltage electrical products by optimizing production processes, troubleshooting equipment, and ensuring high-quality output. This person will act as a "bridge" between product development and production. Monday-Friday, start time 8am Salary starting from $135,000/year, commensurate with experience Responsibilities to include: • Coordinate with production floor staff to identify and trouble-shoot issues, taking corrective and proactive actions to ensure quality., • Utilization of CAD to create, modify, analyze, and optimize designs, significantly improving engineering productivity and design accuracy. Some small fixture design will be required., • Conduct root cause analysis to identify production issues related to quality, efficiency, or equipment failures; implement corrective actions effectively., • Develop and maintain process control plans, inspection criteria, and SOP's for molded components., • Collaborate with QC to investigate non-conformances., • Participate in new product introduction and process qualification activities., • Collaborate with cross-functional teams to drive continuous improvement and reduce scrap and to improve automation and productivity., • Lead project scheduling efforts for new product introductions and process upgrades, ensuring timely completion within budget constraints., • Bachelor's degree in Mechanical, Industrial or Chemical Engineering required, • 3+ years experience working within a manufacturing facility required, • Strong proficiency using CAD software required., • Knowledge of lean manufacturing methodologies and continuous improvement strategies., • Ability to perform root cause analysis using structured problem-solving techniques., • Effective communication skills to collaborate across departments including manufacturing operations and engineering teams. This position is integral to maintaining high-quality production standards while fostering innovation through advanced manufacturing techniques., • Bilingual a plus, • Knowledge of rubber and/or plastic injection molding operations highly desired.

Core Requirements: • Bachelor’s degree, • 10+ years of progressive manufacturing operations leadership experience Preferred Requirements: • Aerospace or highly regulated manufacturing experience, • Experience supporting high-growth manufacturing environments The successful candidate will lead plant operations with full accountability for operational performance, profitability, and scalable growth. This executive leadership role is responsible for driving operational excellence across safety, quality, delivery, inventory, and financial performance while supporting aggressive growth objectives. The General Manager will partner closely with executive leadership to translate strategic objectives into disciplined operational execution. Responsibilities: • Oversee all plant operations with full accountability for safety, quality, delivery, inventory, and financial performance., • Drive operational execution through KPI management, capacity planning, and disciplined day-to-day leadership., • Lead continuous improvement initiatives focused on Lean manufacturing, 6S, workflow optimization, and productivity enhancement., • Develop and execute operational strategies supporting growth, automation, capital investment, and scalability initiatives., • Build and develop high-performing teams while strengthening accountability, leadership capability, and operational discipline., • Partner cross-functionally with Quality, Supply Chain, Engineering, and executive leadership to support customer commitments and long-term business objectives. CiresiMorek is a team of experienced industry professionals known for a hands-on, relationship-driven approach. Having completed 3,500+ searches, we are more than just headhunters; we are industry advisors behind every successful placement. Confidentiality is guaranteed. Applications require a resume/CV with contact information. Learn more about us at ___

Hi, we're Nuts.com! Nuts.com is a self-funded, profitable, rapidly growing multi-channel DTC specialty food and wellness company with over 550 people on our team. We're changing the landscape of snacking on nuts, dried fruit, chocolate and more! We planted our roots in Newark, New Jersey during the Great Depression, selling premium nuts on Mulberry Street's open-air market. We've come quite a long way since then, taking our multi-generational family business online in 1999. Even after 97 years, we continue to pride ourselves in expertly sourcing the highest quality foods and treating our customers like family. What's our team like? We're driven, collaborative and entrepreneurial. Energy and passion power our business and we look for candidates who share in that excitement to help us continue to build something special. The role: The Maintenance & Reliability Manager is responsible for ensuring equipment reliability, maximizing asset uptime, and leading the day-to-day maintenance operations at our food manufacturing, warehousing, and distribution site. This role will develop and execute preventive and predictive maintenance programs while supervising and developing a team of maintenance technicians, ensuring a safe, efficient, and compliant operation aligned with our food safety and operational excellence objectives. How you'll make an impact: Maintenance Management • Plan, schedule, and supervise daily maintenance activities, ensuring timely completion of reactive and preventive maintenance work., • Assign, train, and develop a team of 4 maintenance technicians, fostering a culture of safety, food safety, and continuous improvement., • Manage and optimize parts inventory, maintenance spend, and vendor/contractor relationships., • Ensure maintenance activities comply with OSHA, GMP, SQF, and company safety and food safety standards., • Develop, implement, and refine preventive and predictive maintenance programs., • Analyze equipment performance data to identify and resolve chronic issues., • Lead root cause analysis (RCA) and failure mode & effects analysis (FMEA) on equipment failures., • Develop and track maintenance KPIs (MTBF, PM compliance, downtime, etc)., • Partner with production and FSQA teams to support operational and food safety objectives., • Lead small capital projects focused on equipment upgrades, reliability improvements, and automation., • Maintain accurate documentation, including equipment records, work orders, and spare parts inventories., • Ensure compliance with all OSHA, GMP, SQF, and company safety standards., • Lead and participate in safety audits and initiatives related to equipment and maintenance activities., • Support the EHS team in identifying engineering controls to reduce risk. What you’ll bring: • Bachelor’s degree in Mechanical, Electrical, Industrial Engineering, or related field; or equivalent experience., • 5+ years of experience in reliability, maintenance engineering, or similar roles within food manufacturing, distribution, or a related industry., • Supervisory or team lead experience preferred., • Experience with CMMS systems and maintenance planning., • Familiarity with predictive maintenance technologies (vibration analysis, thermography, oil analysis), • Knowledge of root cause analysis and continuous improvement methodologies (Lean, Six Sigma), • Strong problem-solving, analytical, and communication skills., • Commitment to safety and food safety in a manufacturing environment., • Strong financial acumen and experience managing operational budgets and capital investments., • Bilingual in English/Spanish is a plus. What we offer: • A high-growth and rewarding role in a foundationally strong and rapidly evolving business, • Annual Salary Range: $120,000-$135,000 plus annual bonus, • Excellent benefits including a 401K Match, • Paid Maternity, Adoption and Paternity leave, • And all the Nuts.com snacks your heart desires + a 40% employee discount EEO STATEMENT Nuts.com is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, immigration status, age, sex or gender (including pregnancy), gender identity or expression (including transgender status), sexual orientation, marital status, veteran status, physical or mental disability, genetic information, or any other characteristic protected by applicable federal, state, or local laws. Applicants with disabilities who require assistance or accommodation during the application or interview process should reach out to us at .

Job Description Job Title: Machine Operator Paid lunch breaks, generally taken on the production floor. This is not an air-conditioned facility and can get very warm in the summer. The work environment is fast-paced manufacturing. Training on shift you are hired for Pay: $25, plus $1 on 2nd, and $2 on 3rd Shifts: 1st. 6am - 2pm 2nd. 2pm - 10pm 3rd. 10pm - 6am Job Type & Location FLORHAM PARK, New Jersey. Job Description Operate and run cable manufacturing equipment. Monitor the running and quality of the cable output. Once fully trained, you will operate 1-2 cells independently. You will receive an order sheet that specifies the cable and material, set up everything, and input the order specifications into a computer. Basic editing of pre-written programs is required. Additionally, you will troubleshoot equipment during operations or breakdowns and constantly refill the material coating the cables. Responsibilities • Operate and monitor cable manufacturing equipment., • Ensure the quality of the cable output., • Operate 1-2 cells independently once fully trained., • Set up machines according to order specifications and input details into a computer., • Troubleshoot equipment during operations and breakdowns., • Machine operation, • Hand tool usage, • Machine safety, • Troubleshooting, • Inspection, • Mechanical knowledge, • Power tool usage, • Machine maintenance, • Ability to operate a forklift (or willingness to become certified), • Basic Windows operating skills, • Ability to add, subtract, multiply, and divide using whole numbers, fractions, and decimals, • High School Diploma, • 1-3 years of experience and/or training in a process-focused manufacturing center, • Experience with lean/Six Sigma methodologies, • Experience interpreting specification sheets and job instructions Join a growing company with great internal benefits. You will be part of an experienced operator team and will receive cross-training in three separate departments, providing a great opportunity to learn how to operate various machines and expand your skill set. Job Type & Location This is a Contract to Hire position based out of FLORHAM PARK, NJ. Pay and Benefits The pay range for this position is $25.00 - $26.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description About Us Independent Machine Co. is a trusted manufacturer committed to delivering high-quality products and dependable service to customers across multiple industries. We pride ourselves on maintaining a safe, team-oriented work environment focused on precision, efficiency, and continuous improvement. Position Overview We are currently seeking a reliable and detail-oriented Slitting Machine Operator to join our production team in Fairfield, NJ. This role is ideal for someone with manufacturing or machine operation experience who takes pride in producing quality work and maintaining a safe, efficient workspace. Key Responsibilities • Set up, load, adjust, operate, and unload slitting machines and related equipment, • Monitor production runs to ensure products meet customer specifications and quality standards, • Use measuring tools such as scales, calipers, micrometers, and thickness gauges, • Package finished products for shipment, • Perform routine preventative maintenance on machinery as needed, • Maintain accurate production and quality standards throughout runs, • Follow all company safety procedures and maintain a clean work environment, • Previous slitting machine operation experience preferred, • Strong mechanical aptitude and troubleshooting ability, • Ability to read and use precision measuring tools, • Strong attention to detail and organizational skills, • Reliable attendance and a consistent work schedule required, must have transportation, • Good communication with team members and supervisors. Manufacturing or industrial experience is a plus, • Shift schedule and overtime availability (1st shift with overtime as needed), • Basic physical requirements (handling master rolls and related production materials up to 100 lbs. with a pump jack and forklift use for loading/unloading), • Note that training is provided, • Mechanical aptitude, QC awareness, and logistics/shipping experience are a plus, but also something we are looking for, • Follow all safety rules and PPE requirements – maybe some LEAN knowledge, • Maintain consistent quality during production runs, • Pay range/hourly rate (competitive pay based on experience), • Health insurance, • 401(k) retirement plan, • Life and disability insurance, • Paid time off (PTO), • Established and respected manufacturing company, • Team-oriented and safety-focused work environment, • Opportunity to grow your manufacturing and machine operation skills, • Consistent, full-time work with long-term stability and growth opportunities available

Job Description Kenvue is currently recruiting for a: Team Lead, Supply Planning What we do At Kenvue, we realize the extraordinary power of everyday care. Built on over a century of heritage and rooted in science, we’re the house of iconic brands - including NEUTROGENA®, AVEENO®, TYLENOL®, LISTERINE®, JOHNSON’S® and BAND-AID® that you already know and love. Science is our passion; care is our talent. Who We Are Our global team is ~ 22,000 brilliant people with a workplace culture where every voice matters, and every contribution is appreciated. We are passionate about insights, innovation and committed to delivering the best products to our customers. With expertise and empathy, being a Kenvuer means having the power to impact millions of people every day. We put people first, care fiercely, earn trust with science and solve with courage – and have brilliant opportunities waiting for you! Join us in shaping our future–and yours. For more information, click here. Role reports to: Sr Manager Supply Planning EM Location: North America, United States, New Jersey, Summit Work Location: Hybrid What you will do The Supply Planning Team Lead plays a critical role in delivering key Supply Chain performance metrics, including Customer Service (Unit Fill Rate), Inventory ($ and Days of Supply), and SLOB. This role provides both people leadership and functional leadership across supply planning activities, balancing tactical execution with strategic planning initiatives. Key Responsibilities * Lead, supervise, and develop Supply Planners and/or Supply Co-Ops based on evolving business needs. * Coach and influence supply planners both within and outside the direct scope of responsibility to drive consistent, high-quality planning practices. * Own end-to-end supply planning activities across manufacturing sites, existing products, and new product launches. * Execute tactical supply planning while contributing to more strategic initiatives such as: Rough-cut capacity planning, New product introduction (NPI) processes, Organizational and process design. * Optimize interactions across manufacturing, forecasting, inventory management, and Sales & Operations Planning (S&OP) to ensure alignment and performance. * Partner closely with manufacturing sites to ensure supply plans are executable by monitoring capacity, component availability, and constraints. * Proactively identify, mitigate, and resolve product supply, capacity, and customer service risks. * Advise management and cross-functional teams on current and projected product supply status for both existing portfolios and future launches. * Lead or participate in special projects leveraging Six Sigma / Process Excellence methodologies to drive continuous improvement, ensuring compliance with all company policies and procedures. Strategic Inventory Leadership * Represent Supply Planning for the strategic inventory build of the suncare portfolio. * Coordinate across multiple supply planners and manufacturing sites to align inventory build plans. * Partner with Demand Planning to ensure alignment between demand signals and supply execution. * Prepare and communicate clear inventory build status summaries to leadership, highlighting progress, risks, and on-/off-track performance versus targets. What we are looking for Required Qualifications * A minimum of a Bachelor’s degree or equivalent in Supply Chain Management, Business, Engineering, Business Administration, or a related field * 4-6 years of progressive hands-on experience in supply chain planning, inventory management, or related specialist roles * Microsoft Office – Intermediate to advance skill level is required. Proficiency utilizing Excel charts, pivot tables, VLOOKUP features without coaching/guidance. * Strong communication and collaboration skills to effectively lead cross-functional initiatives and influence stakeholders * Proven analytical and problem-solving abilities with a process-oriented mindset and sound decision-making skills Desired Qualifications * Proficiency in advanced planning systems (e.g., SAP APO) and data visualization tools to drive insightful decision-making * Exceptional ability to interpret complex data sets and translate them into actionable supply chain strategies * A proactive mindset with a passion for leveraging technology and creative approaches to overcome supply chain challenges * Strategic thinker with excellent communication skills to engage with local teams and senior leadership effectively * Knowledge of quality management, compliance standards, logistics, and supply chain operations * Professional certifications such as APICS CPIM, CSCP, Lean, or Six Sigma preferred to demonstrate expertise in process excellence * This position may require 10% domestic and international travel. What’s in it for you Annual base salary for new hires in this position ranges: $110,500.00 - $156,000.00 This takes into account a number of factors including work location, the candidate’s skills, experience, education level & other job-related factors. * Competitive Benefit Package* * Paid Company Holidays, Paid Vacation, Volunteer Time & More! * Learning & Development Opportunities * Kenvuer Impact Networks * This list could vary based on location/region *Note: Total Rewards at Kenvue include salary, bonus (if applicable) and benefits. Your Talent Access Partner will be able to share more about our total rewards offerings and the specific salary range for the relevant location(s) during the recruitment & hiring process. Kenvue is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment based on merit without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, or protected veteran status and will not be discriminated against on the basis of disability. If you are an individual with a disability, please check our Disability Assistance page for information on how to request an accommodation.

Job Description The Continuous Improvement Manager is responsible for leading, developing, and executing strategies to drive operational excellence across the medical device manufacturing organization. This role champions Lean, Six Sigma, and problem‑solving methodologies to improve product quality, reduce waste, enhance cost efficiency, and ensure regulatory compliance. The Continuous Improvement Manager partners closely with Manufacturing, Quality, Engineering, Supply Chain, and Regulatory Affairs to standardize processes and cultivate a culture of continuous improvement. Key Responsibilities Continuous Improvement Leadership • Develop and implement sitewide continuous improvement strategies aligned with business goals., • Facilitate Kaizen events, value stream mapping, root cause analysis (RCA), and other improvement workshops., • Mentor and train employees at all levels in CI tools, Lean thinking, and structured problem-solving., • Analyze production and quality performance to identify opportunities for efficiency, cost reduction, and throughput improvements., • Drive initiatives using DMAIC, PDCA, 5S, standard work, and other Lean/Six Sigma methodologies., • Ensure improvement projects support and strengthen compliance with FDA regulations (21 CFR Part 820), ISO 13485, and internal QMS requirements., • Partner with Quality teams to reduce defect rates, CAPA recurrence, and manufacturing variation., • Plan, execute, and sustain medium‑to‑large scale CI projects, ensuring milestones are met., • Develop business cases, project charters, and ROI analyses to justify improvement initiatives., • Promote a culture of operational excellence and accountability throughout the organization., • Create and maintain training materials, SOPs, and standardized processes., • Bachelor’s degree in Engineering, Manufacturing, Operations, or related field., • 5+ years of experience in continuous improvement, operational excellence, or process engineering within a regulated manufacturing environment (medical device preferred)., • Strong working knowledge of Lean, Six Sigma, and structured problem-solving tools., • Experience working within FDA-regulated or ISO 13485 environments., • Demonstrated success leading CI projects and cross-functional teams., • Excellent analytical, communication, facilitation, and change‑management skills., • Familiarity with statistical software (Minitab, JMP, etc.)., • Experience with automation, digital manufacturing tools, or Industry 4.0 technologies.

Job Description The Quality Assurance Supervisor leads quality and process improvement within manufacturing operations. This role ensures products meet specifications, internal standards, and regulatory requirements. The position oversees quality systems, supports ISO 9001 compliance, contributes to ESG initiatives, and drives operational efficiency. Essential Duties: • Oversee quality systems and ISO 9001 compliance, including audits of production processes and finished goods., • Ensure products meet specifications; investigate non-conformances and implement corrective actions., • Train production staff on quality standards and procedures., • Improve workflow efficiency by reducing rework, resolving bottlenecks, and supporting production timelines., • Monitor performance metrics to drive quality, efficiency, and cost improvements., • Generate reports and collaborate with engineering, production, and leadership to support operational and ESG initiatives. Basic Qualifications: • Bachelor's degree in Industrial Engineering, Mechanical Engineering, or related discipline, or equivalent combination of education, training, and experience., • 5+ years of experience in quality assurance, quality control, or manufacturing., • 3+ years of experience reading and interpreting technical drawings., • 3+ years of experience with inspections, audits, or root cause analysis., • 3+ years of experience supporting production or process improvement. Preferred Qualifications: • 5+ years of experience with quality management systems (e.g., ISO 9001)., • 3+ years of experience with Lean, Six Sigma, or continuous improvement methods., • 3+ years of experience with safety and environmental compliance., • 3+ years of experience using ERP systems and data analysis tools., • Professional certification (e.g., CQE, CQA). Physical Requirements: • Ability to move objects up to 50 pounds., • Ability to remain in a stationary position and move through a manufacturing facility., • Ability to work in an industrial environment with noise exposure. Salary/Rate Range: $68,334 - $116,133 Salaries/Rates will vary and may be above or below this rate commensurate with several factors including experience, education, training, location, and merit. Hosokawa Micron Powder Systems provides equal employment opportunities to applicants and employees without regard to race; color; sex; gender identity; sexual orientation; religious practices and observances; national origin; pregnancy, childbirth, or related medical conditions; status as a protected veteran or spouse/family member of a protected veteran; or disability. Hosokawa Micron Powder Systems is committed to providing reasonable accommodation to, among others, individuals with disabilities and disabled veterans. If you need an accommodation because of a disability to search and apply for a career opportunity with Hosokawa, please send an e-mail to to let us know the nature of your accommodation request and your contact information.

Job Description Kenvue is currently recruiting for a: Customer Supply Chain Analyst What we do At Kenvue, we realize the extraordinary power of everyday care. Built on over a century of heritage and rooted in science, we’re the house of iconic brands - including NEUTROGENA®, AVEENO®, TYLENOL®, LISTERINE®, JOHNSON’S® and BAND-AID® that you already know and love. Science is our passion; care is our talent. Who We Are Our global team is ~ 22,000 brilliant people with a workplace culture where every voice matters, and every contribution is appreciated. We are passionate about insights, innovation and committed to delivering the best products to our customers. With expertise and empathy, being a Kenvuer means having the power to impact millions of people every day. We put people first, care fiercely, earn trust with science and solve with courage – and have brilliant opportunities waiting for you! Join us in shaping our future–and yours. For more information, click here. Role reports to: US Market Deliver Hub Location: North America, United States, New Jersey, Summit Work Location: Hybrid What you will do The Customer Supply Chain Analyst will partner with the customer and internal supply chain teams to help optimize the end-to-end supply chain with a focus on network cost and service. The Customer Supply Chain Analyst will process incoming orders, manage logistics and conduct detailed analysis on order and supply chain issues utilizing advanced systems and tools. The Customer Supply Chain Analyst will implement process improvements through cross-functional collaboration as well as partnering with customers to drive achievement of organizational metrics and customer goals. Key Responsibilities: • Develop and leverage key business relationships to understand the customer expectations and internal policies/capabilities to proactively manage the business to meet customer expectations., • Identify, plan and implement end-to-end solutions that improve service and cost and or implement new capabilities, • Deliver innovation to enable our business through the effective use of technology., • Analyze, recommend, and implement modifications to customer purchasing patterns and Kenvue Network and products for optimal service and improved logistics efficiencies, • Drive process and systems improvements that positively impact order management, inventory management, and dashboard measures, • Participate in the design & support customer specific supply chain joint business planning, and Retail Customer Logistics’ Strategic Tactics which further our mission of being a best-in-class customer facing supply chain organization, • Find opportunities to develop transportation solutions to improve on-time delivery and drive profitable growth through logistics, replenishment, and policy optimization., • Help resolve escalated discrepancies relating to data integrity, shipping issues, and trade pricing/promotional management through root cause identification and corrective actions, • Learn and utilize new technology to drive proactive business planning, accurate and timely analytics, and efficiency, • Identify and implement innovative solutions using process excellence tools and methodologies that help shape our programmatic approach within the E2E supply chain, • Utilize Microsoft and other Advanced Analytics applications, data mining as well as business applications such as: SAP, BW, EDI, Celonis and ERP Systems, • Process customer incoming orders and manage logistics to optimize cost and service and will conduct detailed analysis on order and supply chain issues utilizing advanced systems and tools., • Execute and consolidate opportunities for promotional and base business orders., • Proactively manage order fulfillment to meet customer demand through integration with operating company, distribution, and planning/forecasting., • Resolve customer discrepancies relating to data integrity, shipping issues, and trade pricing/promotional management. What We Are Looking For Required Qualifications • A minimum of a bachelor’s degree is required, • Minimum of 2 years of related work experience required, • Solid problem-solving and analytical skills required, • Proficiency with MS Office, including advanced Excel required., • Experience with data visualization tools (e.g., Tableau, Qlik, or Power BI, etc.) required., • Ability to travel up to 10% Preferred Qualifications • Experience with developing digital solutions preferred., • Strong collaboration and communication skills with experience working on multi-functional teams preferred, • SAP experience preferred, • Demonstrated ability and desire to learn and optimize new systems and applications preferred., • A customer-centric mindset, with customer-facing working experience is preferred, • Experience working in the End-to-End Supply Chain (Sourcing, Planning, Manufacturing, Transportation, Distribution, Customer Service) is preferred, • Business applications preferred, such as BW, EDI, Celonis or other ERP Systems, • Process Excellence training or certification such as Lean, Six Sigma is preferred., • Strong project management skills are preferred. What’s in it for you Annual base salary for new hires in this position ranges: $72,675.00 - $102,600.00 This takes into account a number of factors including work location, the candidate’s skills, experience, education level & other job-related factors. * Competitive Benefit Package* * Paid Company Holidays, Paid Vacation, Volunteer Time & More! * Learning & Development Opportunities * Kenvuer Impact Networks * This list could vary based on location/region *Note: Total Rewards at Kenvue include salary, bonus (if applicable) and benefits. Your Talent Access Partner will be able to share more about our total rewards offerings and the specific salary range for the relevant location(s) during the recruitment & hiring process. Kenvue is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment based on merit without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, or protected veteran status and will not be discriminated against on the basis of disability. If you are an individual with a disability, please check our Disability Assistance page for information on how to request an accommodation.

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at . What You'll Do: The Global Command Center is the nerve center of CoreWeave's global data center fleet. We don't just monitor infrastructure, we engineer the systems that make our massive scale manageable. This team is building the operational technology layer that powers real-time visibility, intelligent alerting, and automated response across one of the world's most advanced GPU compute platforms. About the role: As the Command Center Systems & Automation Engineer, you are the technical engine behind our operational platform. You will own the tools, integrations, and automation that give our operators the intelligence they need to act fast and accurately. From enhancing our unified monitoring platform to refining alert intelligence and automating repetitive tasks, your work directly reduces risk and improves uptime across CoreWeave's global infrastructure. • Own the evolution of the Command Center's "Single Pane of Glass", integrating signals from DCIM, EPMS, BMS, and other infrastructure platforms into a unified, real-time operational view., • Transition alerting from threshold-based noise to intelligent, correlated logic using platforms such as Grafana, Prometheus, Ignition, or equivalent tools., • Automate manual operator workflows, including reporting, vendor check-ins, initial triage, and ticket creation., • Design and maintain data visualization dashboards and KPI reporting tools that give operators and leadership clear, actionable insight into fleet health and performance., • Integrate and optimize Jira workflows to accelerate incident response, change management tracking, and task automation., • Build and maintain technical runbooks and automated validation tools to ensure SOPs and MOPs are digitally enforced, not just documented., • Engineer tracking for MTTD and MTTR, enabling data-driven performance improvement and RCA support., • Partner with IT and Facilities Engineering teams to define system ownership boundaries and integration standards for in-scope platforms (DCIM, Ignition, BMS/EPMS). Who You Are: • 5+ years of experience in Data Center Operations, Site Reliability Engineering (SRE), Network Operations, or Advanced Manufacturing, in a mission-critical environment., • Proficient in Python, Go, or other scripting languages for infrastructure automation and workflow orchestration., • Hands-on experience with enterprise monitoring and observability platforms (Grafana, Prometheus, Ignition, or similar)., • Familiarity with SCADA, BMS, EPMS, and BACnet-type systems and how they integrate with operational tooling., • Skilled in SQL or NoSQL databases for operational reporting and KPI dashboard development., • Experience with time series data, telemetry platforms, and data visualization best practices., • Experience in hyperscale or AI infrastructure environments., • Familiarity with historian/telemetry platforms (Ignition or similar) and time series data pipelines., • Background in Agile development practices, able to work iteratively and deliver incremental improvements., • Deep understanding of physical infrastructure (Power, Cooling, Networking) as it relates to high-density GPU workloads., • Experience designing Jira project structures and automations for complex operational workflows., • You love to build the "connective tissue" that makes complex systems feel simple., • You're curious about how to turn a mountain of raw data into a single, actionable alert., • You're an expert in staying calm under pressure and leading teams through high-severity incidents. Why CoreWeave? At CoreWeave, we work hard, have fun, and move fast! We're in an exciting stage of hyper-growth that you will not want to miss out on. We're not afraid of a little chaos, and we're constantly learning. Our team cares deeply about how we build our product and how we work together, which is represented through our core values: • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences The base salary range for this role is $99,000 to $145,000. The starting salary will be determined by job-related knowledge, skills, experience, and the market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration. California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description Kenvue is currently recruiting for a: Supplier Excellence Engineer What we do At Kenvue, we realize the extraordinary power of everyday care. Built on over a century of heritage and rooted in science, we’re the house of iconic brands - including NEUTROGENA®, AVEENO®, TYLENOL®, LISTERINE®, JOHNSON’S® and BAND-AID® that you already know and love. Science is our passion; care is our talent. Who We Are Our global team is ~ 22,000 brilliant people with a workplace culture where every voice matters, and every contribution is appreciated. We are passionate about insights, innovation and committed to delivering the best products to our customers. With expertise and empathy, being a Kenvuer means having the power to impact millions of people every day. We put people first, care fiercely, earn trust with science and solve with courage – and have brilliant opportunities waiting for you! Join us in shaping our future–and yours. For more information, click here. Role reports to: Director, Global Packaging Operations and Supplier Excellence Location: North America, United States, New Jersey, Summit Work Location: Hybrid What you will do The Supplier Excellence Engineer will be responsible for ensuring that the company's suppliers meet the highest standards of quality and performance. The ideal candidate will have experience in the personal care industry and a proven track record of driving supplier excellence. Key Responsibilities * Collaborate with cross-functional teams (Procurement, Supplier Quality, Supply Chain, ESG) to drive supplier executional excellence * Partner with Procurement, Quality, and ESG to establish and enhance packaging supplier technical assessment * Develop and implement supplier performance metrics and scorecards based on the needs of Packaging, Procurement, Quality and ESG partners * Conduct and manage supplier audits and technical assessments to identify core capabilities and expertise in materials, product design, and processing/conversion technologies as well as areas for improvement * Coordinate and manage external resources to conduct technical assessments * Co-lead with Procurement in establishing Packaging Supplier Joint Business Planning and sourcing strategies to partner with suppliers across different tiers (i.e. packaging components, material, technology, molds, etc.) to co-develop/tap into innovation based on supplier’s expertise * Unlock value and drive agility partnering with packaging suppliers and external labs to establish Supplier Package Testing certification program, enabling our supplier base to conduct package testing for Kenvue * Establish and maintain strong relationships with regional/global packaging suppliers ensuring strategic partnerships, regular performance evaluations and develop continuous improvement plans * In partnership with Procurement, co-lead supplier selection, qualification, and onboarding processes to ensure the availability of high quality, cost-effective packaging materials and services * In partnership with Supplier Quality, drive supplier performance metrics, conduct regular supplier assessments, and implement corrective action plans as necessary to maintain high standards of quality, delivery, and cost effectiveness * Stay up-to-date with industry trends and best practices What We Are Looking For Qualifications * Bachelor's degree in Plastics/Mechanical/Industrial Engineering or equivalent specialization. * 4+ years of experience in Plastics Molding Supplier Quality Management or related field * LEAN Manufacturing experience * Strong knowledge of plastic molding materials, technologies, and processes * Strong knowledge of packaging quality standards * Knowledge of root cause analysis to address plastic molding issues * Experience in the personal care industry preferred * Strong analytical and problem-solving skills * Excellent communication and interpersonal skills * Ability to work independently and as part of a global team * Ability to travel domestically and internationally 25% What’s in it for you Annual base salary for new hires in this position ranges: $90,100.00 - $127,200.00 This takes into account a number of factors including work location, the candidate’s skills, experience, education level & other job-related factors. * Competitive Benefit Package* * Paid Company Holidays, Paid Vacation, Volunteer Time & More! * Learning & Development Opportunities * Kenvuer Impact Networks * This list could vary based on location/region *Note: Total Rewards at Kenvue include salary, bonus (if applicable) and benefits. Your Talent Access Partner will be able to share more about our total rewards offerings and the specific salary range for the relevant location(s) during the recruitment & hiring process. Kenvue is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment based on merit without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, or protected veteran status and will not be discriminated against on the basis of disability. If you are an individual with a disability, please check our Disability Assistance page for information on how to request an accommodation.

Job Description COMPANY CULTURE Our focus is to deliver world-class solutions to our customers, on time and of the highest quality as the preferred supplier of highly engineered, energetic, and pyrotechnic devices while developing our associates and maximizing long-term value for our shareholders through organic growth and targeted acquisitions. GENERAL STATEMENT OF DUTIES: The Aerospace Manufacturing Engineer is responsible for designing, developing, scaling, and optimizing manufacturing processes for aerospace products including Cartridge Actuated Devices (CAD) and Propellant Actuated Devices (PAD). This role involves working closely with design, quality, and production teams to ensure that manufacturing methods meet precise specifications, withstand certification standards, and maximize efficiency, safety, and quality. ESSENTIAL DUTIES AND RESPONSIBILITIES: The Aerospace Manufacturing Engineer duties and responsibilities encompass the development, validation, and optimization of manufacturing processes for aerospace components and assemblies including Cartridge Actuated Devices (CAD) and Propellant Actuated Devices (PAD). The Aerospace Manufacturing Engineer has the following responsibilities: • Process Development & Design:, • Develop and validate manufacturing processes for aerospace components, Cartridge Actuated Devices (CAD) and Propellant Actuated Devices (PAD), assemblies, and systems., • Design tooling, fixtures, and production equipment to improve efficiency and precision., • Apply process improvement methodologies to reduce waste and enhance productivity., • Product Quality & Compliance:, • Ensure manufacturing processes adhere to aerospace industry standards (e.g., AS9100, FAA requirements, etc.)., • Collaborate with quality teams to develop inspection and testing procedures to support customer requirements and standards., • Troubleshoot and resolve manufacturing issues related to quality or process deviations., • Design for Manufacturability:, • Work with product design teams to ensure components are designed for manufacturability and ease of assembly., • Provide feedback on design feasibility, manufacturability, and cost reduction opportunities., • Process Optimization & Automation:, • Analyze current manufacturing workflows and implement improvements., • Identify, implement and manage automation and new technology adoption in manufacturing., • Conduct time studies and process mapping to streamline operations., • Documentation & Standards:, • Create and maintain process documentation, Work Instructions, and SOPs., • Ensure all manufacturing activities are well-documented for traceability and certification purposes., • Cross-Functional Collaboration:, • Work closely with engineering, supply chain, safety, and production teams to meet project deadlines and quality standards., • Participate in design reviews, feasibility assessments, and production planning., • Continuous Improvement & Training:, • Lead continuous improvement initiatives to increase yield, reduce cycle time, and cost. Must possess sight/hearing senses or use prosthetics that will enable these senses to function adequately so that the requirements of this position can be fully met. Physical activity includes walking, standing, bending, squatting, reaching above shoulders and lifting up to 40lbs. Must be able to drive an automobile for short and long distances. The candidate for this position may have to spend long hours using a computer, which can cause eye strain. This position will have to manage a number of requests and situations at one time. Stress may be caused by the need to complete tasks within tight deadlines. WORK ENVIRONMENT: Performs office activities in a lighted and ventilated area. May be subject to changes in temperature and exposure to dust. Will be exposed to uncontrolled environmental conditions during driving. Will work in a normally acceptable office environment, with no abnormal hazards or risks. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Travel between two manufacturing sites, Byram NJ and Fairfield. QUALIFICATIONS, KNOWLEDGE, AND SKILLS: • Experience working with aerospace materials such as composites, titanium, aluminum alloys, Cartridge Actuated Devices (CAD) and Propellant Actuated Devices (PAD)., • Knowledge of Six Sigma, Lean Manufacturing, or other process improvement frameworks., • Ability to read and interpret engineering drawings and specifications., • Project management skills for leading process improvement projects., • Familiarity with ERP/MRP systems related to manufacturing., • Effective decision-making and strategic planning skills., • Strong knowledge of Microsoft applications: Word, excel, power point, share point., • Excellent analytical, organizational, and problem-solving skills., • Excellent communication and stakeholder management skills., • Ability to work effectively with management and cross functional team to meet critical deadlines., • Experience with compliance documentation and certification processes., • Ability to work under pressure and manage multiple tasks simultaneously., • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Aerospace Engineering, or related discipline., • 5+ years of experience in aerospace manufacturing or a related high-precision manufacturing environment., • Knowledge of aerospace manufacturing processes such as machining, composite layup, welding, assembly, and NDT, Cartridge Actuated Devices (CAD) and Propellant Actuated Devices (PAD)., • Familiarity with aerospace standards (e.g., AS9100, NADCAP) and regulatory requirements., • Experience with CAD/CAM software, and manufacturing automation tools., • Strong problem-solving skills and analytical mindset., • Proven experience in aerospace component development, testing, or systems integration., • Strong understanding of aerospace design standards and regulations (e.g., AS9100, FAA, EASA)., • Strong understanding of defense mil specs for pyrotechnics and energetics design standards and regulations including but not limited to Mil-STD-1316, MIL-STD-2104, MIL-STD-2105, MIL-STD-1630, MIL-DTL-23659. The above information on this description has been designed to indicate the general nature and level of work performance by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Cartridge Actuated Devices is an Equal Opportunity Employer and encourages the application of female, minority, disabled, and veteran candidates. Due to the potential for exposure to ITAR controlled data, the incumbent in this role must be a US Person (US Citizen or US Permanent Resident). Due to the nature of our products, To the extent applicable to an employee's role, each employee must be able to obtain (and maintain) the ATF Possessor License as a condition of employment. Employment with Cartridge Actuated Devices is contingent upon the successful completion of a background investigation, including any required Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) screening, and drug screening, as permitted by applicable law. The background investigation may include verification of employment history, education, criminal records, ATF-mandated checks, and other relevant information to determine suitability for employment. The drug screening will be conducted in accordance with state and federal regulations. Failure to successfully pass the background check, ATF screening, or drug screening, or the provision of false or misleading information during the application process, may result in withdrawal of a job offer or termination of employment. By proceeding with the application process, you acknowledge and consent to the background, ATF, and drug screening requirements as described above.

Job Description Hi, we're Nuts.com! Nuts.com is a self-funded, profitable, rapidly growing multi-channel DTC specialty food and wellness company with over 550 people on our team. We're changing the landscape of snacking on nuts, dried fruit, chocolate and more! We planted our roots in Newark, New Jersey during the Great Depression, selling premium nuts on Mulberry Street's open-air market. We've come quite a long way since then, taking our multi-generational family business online in 1999. Even after 97 years, we continue to pride ourselves in expertly sourcing the highest quality foods and treating our customers like family. What's our team like? We're driven, collaborative and entrepreneurial. Energy and passion power our business and we look for candidates who share in that excitement to help us continue to build something special. The role: The FP&A Manager is a senior individual contributor responsible for owning financial insights and decision support across key commercial and operational domains at Nuts.com. This role sits at the intersection of DTC commercial finance, ecommerce marketing analytics, and manufacturing / supply chain economics. The ideal candidate is deeply analytical but fundamentally business-minded, someone who understands how pricing, promotions, marketing spend, production costs, and operational constraints translate into contribution margin, cash flow, and profitability. This is a hands-on role in a fast-moving, high-SKU consumer business. You will be expected to go deep, move quickly, and influence outcomes. How you'll make an impact: Planning & Forecasting • Own key components of the annual budget, reforecast, and rolling forecast processes, • Develop driver-based forecasts that connect commercial and operational assumptions to financial outcomes, • Pressure-test assumptions with business partners and surface risks, tradeoffs, and mitigation actions, • Produce clear recommendations, not just variance explanations Reporting & Results Analysis • Prepare weekly and monthly performance reporting, including P&L, contribution margin, and key operating metrics, • Lead margin analysis (volume / rate / mix) across products, channels, and time, • Partner closely with Accounting during close to ensure analytical accuracy and alignment, • Translate complex results into clear, decision-ready insights for non-finance stakeholders Financial Modeling & Analytics • Maintain and enhance financial models, Build models to support pricing decisions, customer and product profitability analysis, unit economics analysis, and investment decision support, • Conduct scenario planning and sensitivity analyses to support strategic and operational decision making., • Provide analytical support for new initiatives and business opportunities Commercial Finance (DTC-First) • Own financial performance insights for DTC revenue, margin, and contribution profit, including pricing, promotions, discounting, and mix, • Partner with Merchandising and Growth to evaluate SKU-level profitability, promo ROI, and channel tradeoffs between DTC and wholesale;, • Partner with Merchandising, Marketing, Product, and Operations to develop budgets, forecast performance, and assess financial impact of initiatives., • Support customer acquisition and retention modeling including LTV, CAC, and funnel analytics., • Contribute to the creation and maintenance of scorecards, dashboards, and KPI reporting., • Identify and recommend margin improvement opportunities across pricing, SKU optimization, and value engineering., • Support channel-level performance analysis (DTC required; wholesale, marketplace, or Amazon a plus), • Identify and quantify margin expansion opportunities through pricing, assortment, and value engineering Operations & Cost Finance • Partner with Operations, Manufacturing, and Supply Chain in Cranford to analyze production costs, yield, labor efficiency, overhead absorption, and capacity utilization, • Assist in the development and maintenance of manufacturing cost standards and analyze purchase price, usage, yield, and volume variances, • Analyze fixed vs variable cost behavior across manufacturing, fulfillment, and distribution, • Translate operational drivers into unit economics at the pound, unit, package, and shipment level, • Assess margin impacts from volume, mix, and throughput changes What you'll bring: • 6–9+ years of progressive FP&A or commercial finance experience, • 5+ years supporting a DTC or ecommerce business, with direct ownership of revenue, gross margin, and contribution margin analytics, • Demonstrated experience operating in small-to-mid sized businesses with lean teams, with a willingness to work in the weeds when needed, • Strong command of unit economics, contribution margin, and incremental profitability, not just gross margin reporting, • Hands-on experience supporting manufacturing, production, or distribution economics, including cost drivers and throughput constraints, • Working knowledge of absorption costing, standard costs, and operational variance analysis (price, usage, yield, volume), • Experience in high-SKU consumer or food businesses strongly preferred, • Ability to connect ecommerce marketing spend to financial outcomes, including contribution margin, payback, and cash flow, • Advanced proficiency in Excel and Google Sheets; experience with planning systems and BI tools a plus, • Proven ability to influence cross-functional partners through clear thinking, strong recommendations, and credibility, • High ownership mindset with strong attention to detail and bias toward action, • Excitement for working in a fast-moving, growth-oriented environmentWhat we offer:, • A high-growth and rewarding role in a foundationally strong and rapidly evolving business, • Annual Salary Range: $130,000 - $140,000 plus annual bonus, • Excellent benefits including a 401K Match, • Paid Maternity, Adoption and Paternity leave EEO STATEMENT Nuts.com is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, immigration status, age, sex or gender (including pregnancy), gender identity or expression (including transgender status), sexual orientation, marital status, veteran status, physical or mental disability, genetic information, or any other characteristic protected by applicable federal, state, or local laws. Applicants with disabilities who require assistance or accommodation during the application or interview process should reach out to us at .

Job Description Mission The Quality Engineer plays a critical hands-on role in ensuring PTI Tech delivers precise, reliable components that meet the demanding standards of aerospace, defense, and other high-reliability industries. This position combines inspection, metrology, and engineering analysis to ensure products meet specifications while continuously improving manufacturing processes. The role begins with strong involvement in inspection and measurement systems while developing engineering capabilities in statistical analysis, root cause problem solving, and process validation. Over time, the engineer will grow into advanced metrology programming and quality engineering leadership responsibilities. This position is ideal for a motivated early-career engineer who is passionate about manufacturing, highly detail-oriented, and eager to learn measurement technology, data analysis, and structured problem solving. Competencies – What This Person Must Be Hands-On Inspector & Measurement Specialist - Develop strong capability in dimensional inspection using calipers, micrometers, optical systems, and coordinate measuring equipment. Interpret engineering drawings and GD&T to verify product conformance. Developing Metrology Programmer - Learn and progressively support programming and operation of advanced measurement systems including CMM, optical vision systems, and automated inspection equipment. Calibration & Measurement System Steward - Support the management of the calibration system to ensure all gages, instruments, and fixtures remain accurate, traceable, and compliant with AS9100 and customer requirements. Data-Driven Problem Solver - Use structured methods such as 8D, 5 Whys, and Ishikawa analysis to investigate defects and identify sustainable corrective actions. Process Control Advocate - Support statistical process control, capability analysis, PFMEA, control plans, and Gage R&R studies to strengthen measurement reliability and process stability. Metrics-Driven: Uses data analysis to monitor trends, reduce scrap, and eliminate recurrence of quality issues. Standards-Focused - Apply AS9100, ISO 9001, and customer quality requirements in daily operations, documentation, and investigations. Sense of Ownership & Urgency - Demonstrate initiative, accountability, and responsiveness when addressing quality issues affecting production or customers. Cross-Functional Collaborator - Work closely with manufacturing, engineering, and production teams to ensure requirements are clearly understood and processes remain capable. Key Responsibilities Inspection & Measurement • Perform dimensional inspection of components using manual tools, optical systems, and automated measurement equipment., • Interpret engineering drawings, tolerances, and GD&T to verify product conformance., • Support and progressively learn CMM, OGP, and Keyence inspection systems., • Assist in the development and refinement of inspection methods and inspection fixtures., • Document inspection results and maintain accurate inspection records. Quality Engineering Support • Drive quality improvements through Gage R&R studies, Statistical Process Control (SPC), Six Sigma, and Lean Manufacturing tools., • Support Gage R&R studies and measurement system evaluations., • Participate in root cause investigations for internal and customer quality issues., • Perform root cause analysis using structured problem-solving methods (8D, 5 Whys) and verify the effectiveness of corrective and preventive actions (CAPA)., • Assist with First Article Inspection Reports (AS9102), Production Part Approval Process (PPAP-AS9145), and validation activities., • Analyze scrap, defect, and process data to identify trends and improvement opportunities. Calibration & Measurement Systems • Support the management of the calibration system to ensure all gages and measurement equipment remain compliant and traceable., • Maintain calibration records and coordinate calibration activities with external vendors., • Assist in investigations when measurement equipment is found to be out of tolerance., • Ensure measurement systems remain reliable and capable of supporting production requirements. Key Metrics & KPI’s • ≥ 98% Quality Shipments, • ≥ 90% Gage R&R Pass Rate, • 100% on-time completion of assigned inspections., • 100% On-Time Calibration Compliance, • ≥ 1.33 Cpk for Stable Processes, • ≤ 3% Internal Scrap Rate on assigned processes, • ≥ 95% CAPA Effectiveness, • ≥ 95% On-Time Submission of FAIRs, PPAPs, SCAR’s, and CAPA’s, • ≥ 95% Documentation Accuracy Rate Required Experience and Qualifications (Subject to Management Discretion) • Bachelor’s degree in Mechanical, Manufacturing, or a related Engineering field, • Strong interest in manufacturing, metrology, and quality systems., • Ability to read and interpret engineering drawings and strong GD&T., • Strong analytical and problem-solving skills., • Strong written and verbal communication skills., • Proficiency in Microsoft Excel and basic data analysis. Preferred Qualifications • ASQ Certified Quality Engineer (CQE) or other ASQ or Six Sigma certification, • Hands-on inspection experience including CMM, optical, or non-contact methods, • Experience with CMM programming & operation (Zeiss – Calypso strongly preferred), • Experience in defense, aerospace, or medical device industries Physical Requirements • Ability to stand and walk on the production floor for extended periods, • Capable of lifting up to 40 lbs and accessing production and inspection equipment, • Manual dexterity for handling tools, parts, and inspection equipmentCompany DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 38-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it. PTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Engineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 38-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it.\n\nPTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.

Job Description Job Title: CNC Programmer Job Summary: We are seeking a skilled CNC Programmer to develop, optimize, and maintain CNC programs for precision machining operations. The ideal candidate will have strong technical expertise in multi-axis milling machining processes, CAD/CAM software, and blueprint interpretation, with a focus on quality, efficiency, and continuous improvement. Key Responsibilities: • Create, modify, and optimize CNC programs for milling machining, • Interpret technical drawings, blueprints, and CAD models to determine machining requirements., • Select appropriate tooling, cutting parameters, and machine setups., • Collaborate with engineers, machinists, and production teams to ensure efficient workflow., • Troubleshoot machining issues and implement corrective actions., • Perform test runs and make necessary adjustments to ensure product quality and accuracy., • Proven experience as a CNC Programmer or similar role., • Proficiency with CAD/CAM software (Gibbs, SolidWorks are highly preferred), • Strong understanding of G-code, • Ability to read and interpret technical drawings, • Knowledge of machining processes, tooling, and materials., • Strong problem-solving skills and attention to detail., • Experience with multi-axis machining (3, 4, or 5-axis)., • Familiarity with lean manufacturing principles., • Previous experience in a high-precision or high-volume production environment., • Experience with ERP system (Epicor) and Gibbs CAM software is highly preferred, • Competitive salary based on experience., • Health, dental, and vision insurance., • Paid time off and holidays., • Opportunities for training and career advancement.

Job DescriptionSalary: $80K-$85K Mamas Creations, Inc. (NASDAQ: MAMA) is a leading marketer and manufacturer of fresh deli prepared foods, found in over 8,500 groceries, mass, club and convenience stores nationally. The Companys broad product portfolio, born as Mama Mancinis, from a rich history in Italian foods, now consists of a variety of high quality, fresh, clean and easy to prepare foods to address the needs of both our consumers and retailers. Our vision is to become a one-stop-shop deli solutions platform, leveraging vertical integration and a diverse family of brands to offer a wide array of prepared foods to meet the changing demands of the modern consumer. For more information, please visit. TheProduction Managerwill oversee day-to-day operations of the manufacturing plant andbe responsible formanaging production schedules, ensuring Grandma Quality and safety standards are met,optimizingworkflows, and leading a team to meet production targets efficiently and cost-effectively. This role requires strong leadership skills to promote our culture of values: Commit to Craftsmanship, Nurture Relationships, and Honor Heritage. Candidates shoulddemonstratea commitment to taking pride in their work, innovating within tradition, and fostering an inclusive and supportive team environment. Strong organizational and problem-solving skills, along with a deep understanding of food production processes and regulatory requirements, are also necessary. Key Responsibilities: • Plan, coordinate, and control manufacturing processes to meet daily, weekly, and monthly production targets. Maintain an unwavering commitment to Grandma Quality while seeking innovative solutions that respect our time-honored methods., • Supervise and motivate production staff, including supervisors, operators, and line workers. Foster an inclusive, respectful, and collaborative environment that values each team members contributions. Promote a culture of accountability, safety, craftsmanship, and continuous improvement. Align labor with volume requirements and throughput goals to ensure sustainable practices., • Develop and implement training programs to ensure team members areproperly trained/cross-trained on production procedures, safety protocols, equipment operation, and Grandma Quality standards. Encourage individual growth and learning, while celebrating team and individual achievements and milestones., • Ensure all products meet established Grandma Quality standards andcomply withfood safety regulations (e.g., FDA, USDA, HACCP, GMP). Take pride in delivering excellence that reflects our heritage and earns the trust of our consumers., • Develop andmaintainproductionand staffingschedules and resource plans to ensure efficiency in throughput and labor costs. Lead post-shift huddles to confirm schedule attainment, analyze shortfalls, document root causes, and support an open exchange of ideas for continuous learning., • Coordinate with procurement and warehouse teams to ensure raw materials and packaging supplies are available as needed. Track inventory levels forinfrequentlyrun items. Respect our partnerships with suppliers by fostering clear communication and collaboration., • Identifyopportunities to improve processes, reduce waste, and increase efficiency through lean manufacturing principles. Encourage team input to innovate within tradition and honor the craftsmanship behind every improvement., • Enforce strict adherence to safety protocols and lead initiatives to improve workplace safety and reduce incidents. Cultivate a safe and inclusive environment where everyone feels valued and protected., • Prepare and present production reports, performance metrics, and operational KPIs to senior management. Issue production status updates; flag delays caused by machinery, staffing, or materials. Use data to celebrate wins,identifygrowth areas, and inform sound decision-making., • Manage andmonitoremployee hours/overtime using ADP via the time clock system. Maintain fair and transparent practices that support employee well-being and work-life balance while ensuring operational efficiency. Qualifications: • Bachelor's degree in food science, Engineering, Operations Management, or related field; or equivalent experience., • 5+ years of production or operations management experience in a food manufacturing environment., • Strong knowledge of food safety standards, HACCP, GMP, and other relevant regulatory requirements., • Proven leadership skills with experience managing teams in a manufacturing setting., • Excellent organizational, analytical, and problem-solving abilities., • Proficient with manufacturing software (NetSuite preferred), Microsoft Office Suite, and production planning tools. Preferred Qualifications: • Lean Six Sigma certification or experience with lean manufacturing techniques., • Bilingual in English and Spanish Work Environment &EssentialPhysical Requirements: • Stand/walk for extended periods of time, • Wearappropriate protective/sanitaryclothing/equipment, • Maintain manual dexterity, • Operate various manual and electric kitchen equipment, • Reach, • Lift/carry up to 60 pounds, • Be exposed to extreme hot/cold temperatures

Job Description Our client in Fairfield, NJ is looking for an onsite, direct hire Manufacturing Industrial Engineer. Pay: $120k-$130k The ideal candidate will have an engineering background in mechanical engineering, industrial engineering, systems engineering, value engineering, or related engineering field with concentrated technical knowledge and previous experience in precision metals and plastics manufacturing and/or complex finished device assemblies. Responsibilities: • This role is fundamentally based on long-standing best practices in industrial engineering principles: identifying waste, defining value streams, productivity optimization, kanban setups, takt time studies, labor tracking, ergonomics, material flow, pFMEA, and similar Lean Six Sigma tools., • Support new business development with the purpose of generating accurate and detailed costing proposals that exceed customer expectations for quality, price, and delivery., • Bachelor's degree in Engineering (Mechanical, Industrial engineering, Systems engineering, Value engineering), • Minimum of 5 years of experience in value engineering, industrial engineering, manufacturing costing, or related role in the manufacturing industry, with specific experience utilizing industry 4.0 best practices and/or Lean, • Experience working for a Contract Manufacturer or OEM, • Strong engineering background with a solid understanding of manufacturing processes, materials, and equipment, • Ability to identify the best possible manufacturing processes, • Proficiency in using SolidWorks or equipment CAD/CAM software packages for estimating and DFM purposes, • Experience in product level design for manufacture (DFM), • Ability to collaborate across engineering Centers of Excellence for multi-plant vertically integrated proposals, • Excellent analytical and problem-solving skills, • Strong attention to detail and accuracy, • Effective communication and interpersonal skills, • Ability to work independently and as part of a cross-functional team, • Knowledge of industry standards and best practices in cost estimation

Job DescriptionDirector of Quality - Manufacturing Director of Quality Position Overview We are seeking an experienced Director of Quality to lead and advance our quality organization in a fast-paced manufacturing environment. The Director will develop and maintain a robust quality management system, ensure compliance with regulatory and customer requirements, drive continuous improvement, and partner with manufacturing, engineering, procurement, and leadership to deliver high-quality products on schedule. This role combines strategic leadership with hands-on problem solving to sustain product integrity, improve process capability, and enhance customer satisfaction. Key Responsibilities • Define and implement the company quality strategy and roadmap aligned with business objectives and manufacturing priorities., • Lead, mentor, and grow the quality organization including quality engineers, inspectors, and system administrators., • Develop, document, maintain, and continuously improve the Quality Management System (QMS) to meet internal, customer, and regulatory requirements., • Ensure compliance with applicable standards and regulations (e.g., AS9100, ITAR, NADCAP where applicable) and manage external and internal audits., • Oversee supplier quality management program including qualification, performance monitoring, corrective actions, and supplier development., • Direct root cause analysis and corrective/preventive action (CAPA) activities for product and process nonconformances., • Establish, monitor, and report on key quality metrics (e.g., PPM, DPMO, OTD related to quality) and use data to drive decisions and continuous improvement., • Drive process capability and reliability initiatives using Lean and Six Sigma methodologies to reduce variation, waste, and costs., • Manage metrology and inspection capability requirements, including calibration, measurement systems analysis (MSA), and laboratory controls., • Coordinate cross-functional problem solving with engineering, production, procurement, and program management to resolve quality risks and support new product introductions., • Represent the company to customers, auditors, and regulatory authorities on quality matters; lead customer quality reviews and resolve escalations., • Required: Proven experience in Manufacturing and Quality Management with a minimum of 10 years in progressively responsible quality roles within a manufacturing environment., • Experience in a precision casting environment highly desired., • Required: Experience in Aerospace or Defense industries and familiarity with industry-specific requirements., • Required: Hands-on knowledge of AS9100 implementation and surveillance audits., • Required: Familiarity with ITAR compliance and export control considerations., • Required: NADCAP experience or auditor familiarity for special processes., • Required: Demonstrated leadership experience managing cross-functional quality teams and programs at a senior level., • Required: Strong knowledge of quality systems, auditing, CAPA, FMEA, control plans, and measurement system analysis., • Required: Excellent problem-solving skills with experience leading root cause analysis and corrective actions., • Required: Experience working with suppliers and managing supplier quality performance., • Education: Bachelors degree in Engineering, Manufacturing, Quality, or related technical field; advanced degree preferred., • Nice to have: Strong metrology background, including calibration and MSA experience., • Nice to have: Practical experience with Lean manufacturing and Six Sigma (Black Belt or Green Belt preferred)., • Health, dental, and vision insurance, • 401k with company match, • Paid time off, • Paid holidays - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 04/02/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.Everforth CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. Everforth CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. Everforth CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionContinuous Improvement Engineer (Temporary) Compensation: Up to $65/hour Employment Type: Temporary (open-ended until permanent hire is identified) Overview: Seeking a Continuous Improvement Engineer to support a manufacturing environment by driving operational efficiencies and process improvements. This role focuses on applying Lean and Six Sigma methodologies to enhance safety, quality, productivity, and cost performance. Key Responsibilities: • Identify process inefficiencies and implement improvement initiatives across manufacturing operations, • Apply Lean tools such as value stream mapping, 5S, Kaizen, SMED, TPM, and PDCA, • Conduct root cause analysis, FMEA, and problem-solving to address operational challenges, • Analyze data using Excel or similar tools to track performance and drive decisions, • Partner cross-functionally to improve workflows, reduce waste, and increase output, • Support projects that improve safety, quality standards, and overall plant performance, • Assist in developing and maintaining process documentation and best practicesQualifications:, • Experience in manufacturing, industrial engineering, or process improvement roles, • Strong knowledge of Lean Manufacturing and Six Sigma methodologies, • Proficiency with data analysis tools (Excel; Minitab a plus), • Ability to manage multiple projects and communicate effectively with all levels, • Strong analytical, organizational, and problem-solving skillsPreferred:, • Experience with ERP or MES systems, • Familiarity with SAP or similar systemsPay Details: $55.00 to $65.00 per hour Search managed by: Tracy Galarza Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionLocation: Elizabeth, NJ Environment: High-volume, temperature-controlled (cold chain) food manufacturing Position Overview:We are seeking an experienced Plant Manager to lead and transform our food manufacturing operations during a critical growth phase.This role is responsible for full plant performance, including production, food safety, quality alignment, team leadership, and operational efficiency. The ideal candidate brings a proven track record of leading teams through audit readiness (SQF/GFSI), implementing process improvements, and driving automation and operational scalability. This is a hands-on leadership role requiring strong floor presence, decision-making, and the ability to stabilize and elevate operations in a fast-paced environment. Key Responsibilities: Plant Leadership & Operational Ownership: • Lead all day-to-day plant operations including Production, Warehouse, and Maintenance coordination, • Own plant performance across safety, quality, delivery, and cost metrics, • Establish structure, accountability, and consistent execution across all shifts Production & Performance Management:, • Drive production output aligned with demand while improving efficiency and reducing waste, • Monitor and improve KPIs such as OEE, labor efficiency, downtime, and throughput, • Identify bottlenecks and implement solutions to improve flow and capacity Food Safety, Quality & Audit Leadership:, • Lead plant readiness for SQF and regulatory audits in close partnership with Quality leadership, • Ensure strong execution of GMPs, HACCP, sanitation, and food safety standards, • Support corrective actions (CAPAs) and continuous compliance improvement Automation & Continuous Improvement:, • Identify and implement automation opportunities to improve efficiency and reduce labor dependency, • Lead process improvements, layout optimization, and workflow redesign, • Drive a culture of continuous improvement across operations Team Leadership & Development:, • Lead, coach, and develop supervisors and department leaders, • Build accountability and performance-driven culture across all levels, • Strengthen communication between Production, Quality, and Warehouse teams Maintenance & Facility Coordination:, • Partner with Maintenance to ensure preventive maintenance programs are effective, • Support capital improvement initiatives and equipment upgrades, • Ensure minimal downtime and operational continuity Required Qualifications:, • 7+ years of experience in food manufacturing, • 3+ years in a Plant Manager or Senior Operations role, • Proven success leading SQF, GFSI, or similar audit processes, • Demonstrated experience improving plant performance and operational structure, • Experience implementing automation or process improvement initiatives, • Strong leadership and team development experience Preferred Qualifications:, • Bilingual (English/Spanish) strongly preferred, • Experience in cold-chain or temperature-controlled environments, • Experience with ERP/MRP systems, • Lean Manufacturing / Continuous Improvement experience Why Join Us:, • Opportunity to lead and transform a growing manufacturing operation, • Direct impact on plant structure, efficiency, and long-term scalability, • Work closely with ownership and leadership on strategic initiatives, • Be part of building a high-performing, audit-ready, and scalable operation

Job DescriptionSalary: $165,000-$185,000 Mamas Creations, Inc. (NASDAQ: MAMA) is a leading marketer and manufacturer of fresh deli prepared foods, found in over 8,500 grocery, mass, club and convenience stores nationally. The Companys broad product portfolio, born as MamaMancinis, from a rich history in Italian foods, now consists of a variety of high quality, fresh, clean and easy to prepare foods to address the needs of both our consumers and retailers. Our vision is to become a one-stop-shop deli solutions platform, leveraging vertical integration and a diverse family of brands to offer a wide array of prepared foods to meet the changing demands of the modern consumer. For more information, please visit . We have an excellent opportunity for a highly skilled and experienced leader to serve as the Senior Director, Plant Operations of our East Rutherford facility. You will be the senior site leader responsible for the overall performance, safety, Grandma Quality, controls, culture, and financial results of the manufacturing facility. This role serves as the plants general manager, accountable for translating enterprise strategy into consistent, disciplined execution with excellence at the site level. The Senior Director leads through people, systems, and standards, ensuring production, FSQA, maintenance, warehousing, and workforce leadership operate in alignment with Grandma Quality. This role balances results with responsibility, honoring Mamas heritage while building scalable, sustainable operations. Key Responsibilities • Own end-to-end plant performance, including safety, food safety, quality, service, cost, labor efficiency, and employee engagement., • Own overall plant efficiency and throughput performance, ensuring production capacity, labor models, and operating practices support enterprise targets., • Drive improvement in throughput, yield, and line performance by setting expectations, removing barriers, and holding leaders accountable for results., • Serve as the strategic leader for the site, translating enterprise priorities into clear site-level strategies, initiatives, and execution plans., • Partner with the Senior Manager, Production Operations to ensure production schedules and execution plans support optimal efficiency and service outcomes., • Own the plant operating budget, including labor, overtime, supplies, and controllable costs; ensure performance aligns with financial targets., • Balance cost discipline with Mamas commitment to Grandma Quality, safety, and employee well-being., • Use KPIs and financial data to evaluate performance, prioritize investments, and guide decision-making., • Partner with OpEx/CI to identify and sponsor continuous improvement initiatives that deliver measurable, sustainable gains in efficiency, throughput, and cost performance., • Ensure efficiency gains and cost improvements are sustainable and embedded into standard work and leadership routines., • Lead, coach, and hold accountable all direct reports, site functional leaders, and the downline., • Serve as the primary owner of plant culture, reinforcing values-based leadership, respectful supervision, and consistent accountability., • Ensure site execution aligns with enterprise standards of excellence and Grandma Quality while addressing location-specific risks and opportunities., • Partner with FSQA leadership to maintain strong food safety culture, regulatory compliance, and audit readiness., • Own site-level labor strategy, workforce planning, and performance management in partnership with People Operations., • Drive operational discipline through KPIs, operating practices, and structured problem-solving., • Partner with Reliability & Asset Management to support uptime, preventive maintenance execution, and capital improvements., • Support capital projects, expansions, and equipment installations at the site level., • Participate in operational diligence and integration activities related to acquisitions or expansions impacting the facility., • Serve as the primary escalation point for site risks, performance gaps, and employee relations matters., • Build strong cross-functional relationships that nurture trust, accountability, and pride in workmanship., • Collaborate closely with Senior Directors and plant leaders at other facilities to share best practices, standardize where appropriate, and drive enterprise-wide operational improvement., • Participate in cross-facility working groups, initiatives, and problem-solving efforts to strengthen consistency, performance, and scalability across the enterprise., • Champion collaboration between facilities while respecting site-specific strengths, constraints, and heritage., • Other related tasks, as necessary to drive results and support the business. Qualifications • Bachelors degree in Operations Management, Engineering, Business, or related field; or equivalent experience., • 15+ years of progressive leadership experience in manufacturing operations, preferably in food manufacturing or regulated environments., • 10+ years of experience leading multi-shift operations and managing leaders (managers/supervisors)., • Demonstrated experience owning site KPIs, budgets, labor planning, and operational performance improvement., • Expert usage of ERP systems. NetSuite preferred., • Strong working knowledge of food safety/regulatory environments (USDA/FDA), HACCP, GMPs, and audit readiness expectations., • Proven ability to lead through change while maintaining operational stability and culture., • Strong communication, planning, and cross-functional leadership skills., • Lean/Six Sigma knowledge/certification, preferred., • Bilingual (English/Spanish) highly preferred. Essential Physical Requirements • Ability to regularly walk, stand, and move throughout the manufacturing facility., • Ability to navigate stairs, catwalks, and uneven surfaces safely., • Ability to visually and audibly observe operations and employee practices., • Ability to wear required PPE (hair/beard nets, safety shoes, gloves, safety glasses, hearing protection)., • Ability to work in varying environmental conditions (heat, cold, noise, humidity)., • Ability to sit for extended periods while performing administrative work., • Ability to travel locally as required., • Ability to communicate clearly and effectively. We offer a comprehensive compensation package that includes a base salary (to $185k,) plus bonus eligibility, paid time off, holiday pay, medical, dental, vision, and life insurances, FSA, EAP, and 401(k.)

Job Description Key Areas of Responsibilities: • Ensure the quality of materials meet quality standards and customer requirements through proactive quality assurance, continuous improvement, and strong supplier relationships., • Supplier Development: Collaborate with suppliers to enhance quality management systems and ensure compliance with company standards., • Quality Audits: Conduct regular audits of suppliers to assess their quality processes and identify areas for improvement., • Continuous Improvement: Drive continuous improvement initiatives at supplier locations to reduce defects and enhance overall quality., • Problem Solving: Address and resolve quality issues through root cause analysis, corrective actions, and preventive measures., • Product Qualification: Ensure seamless supplier setup and execution of NPI material., • Cost Out: Partner with suppliers to drive cost out of products in scope., • Documentation: Maintain comprehensive records of supplier performance, audits, and corrective actions., • Training: Provide training and support to suppliers on quality standards, tools, and techniques., • Collaboration: Work closely with internal teams such as procurement, engineering, and manufacturing to align supplier quality with company objectives., • Compliance: Ensure suppliers comply with regulatory requirements and industry standards., • Minimum of 3-5 years of experience in supplier quality engineering or a similar role., • Ideal candidate has a Lean Six Sigma Green Belt (LSSGB) Certification. Additionally, the candidate will have 5 years of execution of projects via (LSSGB) methodologies., • The perfect candidate will have their Lean Six Sigma Black Belt Lean (LSSBB) Certification and a minimum of 7 years of execution of projects via (LSSBB) methodologies., • Proficiency in quality management tools such as Six Sigma, FMEA, SPC, and root cause analysis., • Strong analytical and problem-solving skills to identify and address quality issues., • Exceptional verbal and interpersonal/written communication skills; can effectively interact with suppliers and internal stakeholders., • Ability to lead and mentor supplier teams towards achieving quality objectives., • High attention to detail to ensure precision in audits and quality assessments., • Proactive attitude towards identifying potential quality issues after they arise., • Strong ethical standards and professionalism in supplier interactions., • Creativity in developing new approaches to improve supplier quality., • The ideal candidate has a the following Certifications:, • ISO 9001:2015 - Lead Auditor Professional, • ISO 9001:2015 - Internal Auditor Professional, • ISO 13485:2016 - Lead Auditor Professional, • ISO 13485:2016 - Internal Auditor Professional, • QM - Quality Management Systems, • MD - Medical Devices Quality Management Systems, • AU - Management Systems Auditing, • TL - Leading Management Systems Audit Teams, • AQ - Process Improvement Auditor, • Certified Quality Engineer, • Strong PC skills (Excel, PP, Word, Access, Minitab)., • Demonstrated ability to influence teams and programs regarding quality, productivity and/or customer service., • Ability to work on multiple projects with limited direction., • Overall understanding of a manufacturing company’s operations., • Bachelor’s degree in engineering or related field, specifically Mechanical or Electrical., • B.A. or other advanced technical degrees strongly preferred., • Quality Management degree or experience a strong plus.

We are seeking a highly skilled CNC Programmer/Operator for our manufacturing client in Irvington, NJ. This role involves programming, setting up, and operating CNC milling machines to produce precision components according to detailed specifications. This person will interpret blueprints, write or edit G-code/CAM programs, calibrate tools, and perform quality inspections using measuring tools like micrometers, ensuring compliance with safety and design specifications. Monday-Friday, start time 6am Salary starting at $45/hour, commensurate with experience Key Responsibilities: • Ensure that machines and surrounding area obey Safety Standards, including usage of proper PPE., • Write and optimize CNC programs using CAD/CAM software or G-code to create precise tool paths, speeds, and feed rates., • Perform machine setup, including loading tools, setting tool offsets, and fixture alignment., • Use precision instruments (calipers, micrometers, indicators) to ensure parts meet blueprint specifications., • Perform routine maintenance on CNC machinery and troubleshoot issues promptly to minimize downtime., • 4+ years experience programming and operating CNC milling machines in a manufacturing environment., • Proficient with measuring instruments, reading blueprints and interpreting drawings., • Proficient in Zero Homing and tool offset usage., • Proficient with basic math skills, • Experience with CAM software and G-code., • Bilingual a plus

Job Description Job Overview This position is responsible for making sure that engineering and manufacturing processes are performed correctly using the right tools, materials and processes. This includes ensuring that employees are trained to the right quality standard and that all safety requirements are met throughout the production process and facilities. This is a ‘hands-on’ position that requires solid understanding of manufacturing process, and excellent communication and interpersonal skills when working with production assemblers, soldering specialists, and test technicians. Primary Job Responsibilities • Monitor and maintain Raycap quality processes to assure continual 100% customer satisfaction, • Inspect and test various parts of manufacturing including products, components, processes, and comparing against predefined standards, • Provide quality tools, methods, and data to assure ongoing defect-free quality both internally and at the supplier level, • Analyze problems reported and develop improvements to overcome them, • RMA Analysis and NCR resolution internal and external, • Statistical analysis of manufacturing data and creation of reports for senior staff members based on quality documentation, • Maintain and improve the processes for Quality Management (QMS), Environmental Management (EMS), Telecom Quality Management System (TL9000) and Occupational Health & Safety (OSHA) which includes process auditing, OFI’s implementation, Quality Systems Review and documentation writing or editing, • Serve as manufacturing focal point for intelligent analysis of quality issues, determining true root cause and permanent corrective and preventive actions, • Partner with Supply Chain Management to develop high level suppliers of COTS or custom materials, • B.S. degree required in mechanical, electrical, industrial, or manufacturing engineering, • 5 - 10 years’ experience in a technical field with significant hands-on quality and manufacturing experience, • Effective quality analysis, data analysis, problem-solving, and strategic thinking ability, • Expert knowledge and application of DFx, FMEA and other quality tools, • Ability to effectively collaborate across functions within Raycap, • Effective project management skills that facilitate planning complex projects and the timely completion of project deliverables, • Six-sigma, CQE, CQM, CRE, Lean, or other certifications are desirable, • Proficiency in SAP is desirable., • Ability to use MS Office and statistical packages preferred, • High attention to detail and logical problem-solving skills, • The employee is frequently required to stand; use hands to handle or feel objects, tools, keyboards, or controls; reach with hands and arms; and talk or hear, • Occasionally required to walk, sit, and may also be required to stoop, kneel, crouch, or crawl, • Must occasionally lift and/or move up to 50 pounds, • Specific vision abilities required by this job include close vision, depth perception, and the ability to adjust focus, • Prolonged periods of sitting at a desk and working at a computer Why Choose Us? Raycap, Inc. has decades of experience creating products that protect and support the world’s most valuable assets from power and lightning surges. We focus on 5 Core Values of Customer Focus, Talent, Excellence, Innovation and Integrity, and those values show in everything we do. We also believe it is very important to invest in our employees, and we are proud to offer: • A very competitive benefit package, • Paid Time Off, • 10 company paid holidays, • Tuition Reimbursement, • A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, religion, gender identity, creed, veteran or military status, or other protected status. We participate in E-Verify for all employment verifications. Drug-free workplace.

Job DescriptionDirector of Operations - Aerospace Manufacturing Director of Operations - Aerospace Manufacturing Position Overview Lead and scale day-to-day manufacturing and operations for an aerospace business, driving on-time delivery, quality, cost control and continuous improvement. This role is responsible for developing and executing operational strategy, ensuring compliance with aerospace standards, managing production and maintenance of machining and casting processes, and building a high-performing operations team to meet customer and business objectives. Key Responsibilities • Develop and implement operations strategy aligned with company goals, driving efficiency, quality, and profitability across aerospace production., • Oversee production planning, scheduling and capacity management for machining, aluminum and investment casting processes to meet delivery and budget targets., • Ensure compliance with aerospace quality and certification standards (AS9100, NADCAP) and maintain robust quality management systems and documentation., • Lead continuous improvement programs using Lean and Six Sigma methodologies to reduce waste, improve throughput, and lower costs., • Manage cross-functional collaboration with engineering, supply chain, procurement and quality to resolve production issues and support new product introductions., • Direct vendor and supplier management to secure materials, subcontracts and services that meet aerospace requirements and cost targets., • Establish and track operational KPIs, financial metrics and reporting; develop corrective actions and performance improvements as needed., • Champion safety, environmental and regulatory compliance programs to ensure a safe workplace and adherence to applicable regulations., • Recruit, develop and retain operations talent; build a culture of accountability, skills development and continuous learning., • Required: Significant operations leadership experience in the aerospace industry with proven results driving production, quality and delivery., • Required: Demonstrated experience in operations management, including production planning, cost control and team leadership., • Bachelors degree in Engineering, Operations Management, Manufacturing or related field (or equivalent experience)., • 8+ years of progressively responsible experience in manufacturing or operations; prior leadership of multi-site or complex manufacturing operations preferred., • Strong knowledge of aerospace quality systems and regulatory expectations; experience with AS9100 and NADCAP is highly desirable., • Experience with manufacturing processes including machining, aluminum casting and investment casting is highly desirable., • Practical experience leading Continuous Improvement programs and applying Lean and Six Sigma tools; certification (e.g., Green/Black Belt) is a plus., • Proven ability to manage capital projects, vendor relationships and supply chain challenges in a manufacturing environment., • Health, dental, and vision insurance, • 401k with company match, • Paid time off, • Paid holidays - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 04/22/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.Everforth CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. Everforth CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. Everforth CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionQuality Director OVERVIEW We are seeking a practical, hands-on Head of Quality to lead quality operations within a high-volume food manufacturing environment. This role has full ownership of product quality, food safety programs, and quality systems across the site and plays a critical role in protecting customers, brands, and operations. This position is ideal for a quality leader with deep experience in food or ingredient manufacturing who can set standards, enforce consistency, and work closely with production to drive continuous improvement without slowing the business down. KEY RESPONSIBILITIES Lead all Quality and food safety functions, including in-process checks, finished product release, and quality documentation Own and maintain site quality systems, SOPs, specifications, and records Ensure compliance with food safety, regulatory, and customer requirements Serve as the primary site lead for quality issues, decisions, and escalations Oversee internal audits, customer audits, and regulatory inspections Manage non-conformances, holds, complaints, and corrective actions Partner with Operations, Maintenance, and Supply Chain to embed quality into daily production Track and report KPIs related to quality, food safety, and plant performance Lead, coach, and develop QC, sanitation, and quality staff Drive continuous improvement initiatives focused on consistency, waste reduction, and risk prevention QUALIFICATIONS Bachelor's degree in Food Science, Chemistry, Biology, or a related technical field 7+ years of progressive quality leadership experience within food manufacturing Strong working knowledge of food safety programs and quality systems Experience leading audits and managing regulatory and customer interactions Proven ability to lead teams and influence production and plant leadership Detail-oriented, decisive, and comfortable operating in a fast-paced plant setting PREFERRED EXPERIENCE High-volume or continuous manufacturing environments Oversight of sanitation, HACCP, preventive controls, or GFSI programs Experience improving or scaling plant-level quality systems Exposure to lean manufacturing or continuous improvement initiatives WHAT IS OFFERED $120k-$170k base salary Stable, high growth, exciting, established manufacturing operation Senior leadership role with full ownership of site quality performance Opportunity to shape quality culture and elevate standards across the company Long-term growth potential for a proven quality leader WHY THIS ROLE This is a high-impact plant leadership role with direct responsibility for food safety, compliance, and product consistency. The Head of Quality Control will be a key voice at the table, balancing strong quality standards with the realities of day-to-day manufacturing. • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 04/26/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.Everforth CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. Everforth CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. Everforth CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionBenefits: • 401(k), • Health insurance Position Summary: A well-established precision manufacturer in the aerospace and defense sector is seeking a Director of Quality to lead its quality management systems across casting, machining, and assembly operations. This leadership role is critical to ensuring compliance with industry regulations, driving continuous improvement, and maintaining the highest standards of quality in production. Key Responsibilities: • Develop, implement, and maintain a robust Quality Management System (QMS) aligned with AS9100, ISO 9001, and Nadcap standards., • Lead internal and external audits, customer quality interactions, and regulatory compliance initiatives., • Oversee dimensional and metallurgical inspection processes, including CMM, GD&T, and non-destructive testing., • Drive root cause analysis and implement corrective and preventive actions (RCCM, 8D, CAPA)., • Manage all First Article Inspection (FAI) and PPAP/APQP activities, including documentation under AS9012 and AS13002., • Collaborate with cross-functional teams (engineering, operations, supply chain) to improve process capability and product quality., • Analyze quality KPIs and initiate continuous improvement programs to reduce scrap, rework, and customer complaints., • Mentor and develop a high-performing team of quality engineers, inspectors, and technicians., • Role is on-site and not eligible for remote work.Qualifications:, • Bachelors degree in Engineering or a related technical field required; advanced degree a plus., • Minimum of 10 years of progressive quality leadership experience in aerospace, defense, or high-precision manufacturing., • Extensive knowledge of quality standards and regulatory frameworks: AS9100, ISO 9001, Nadcap, ITAR., • Experience managing audits and customer approvals (e.g., Boeing, Lockheed, Raytheon, Honeywell)., • Strong background in metrology, GD&T, and non-destructive testing., • Familiar with lean manufacturing, Six Sigma methodologies, and ERP systems.

Roquette is a family-owned global leader in plant-based ingredients and a leading provider of pharmaceutical excipients. Want to help us make a difference? Using plant-based resources, we collaborate with our customers and partners to imagine and offer ingredients to better feed people and treat patients. Each of our ingredients responds to unique and essential needs, and they enable healthier lifestyles. We are looking for our next Process Engineer II or III within our Operations Team. The Process Engineer will be responsible for supporting day-to-day support of production processes and developing and implementing improvements to existing processes and products in order to meet corporate and customer standards. This position is located in Newark, Delaware. Compensation: The current salary range for this role is estimated to be $85,000 - $125,000. In addition, this position will be eligible to earn performance-based incentive compensation. The specific compensation offered to a candidate will be influenced by a variety of factors including but not limited to skills, qualifications, experience, and location. What You'll Do: • Serve as the SME and own one or two MCC or non-MCC processing lines, with ability to provide basic or full level support on other lines., • Provide full support and lead or assist in troubleshooting of packaging systems., • Troubleshoot process problems in operations., • Identify and develop process changes and modifications to enhance operating reliability and product quality and to improve efficiencies of key resources., • Identify and develop control mechanisms to improve reliability and efficiency of plant operations., • Understand and track key performance indicators for the manufacturing process, including process yields, rates, etc., • Develop engineering solutions for chronic and sporadic process problems and collaborate with technical, operations, and maintenance to implement solutions., • Identify continuous improvement opportunities and lead implementation of continuous improvement projects., • Undertake cross-training activities to gain understanding of all the processes., • Commission installations in a timely and effective manner., • Write operating procedures and train operators on start-ups and integration of new systems., • Monitor environmental regulations and performance against such as it pertains to project areas., • Independently lead in Root Cause Failure Analysis (RCFA) pertaining to deviations, incident investigations, complaints, etc., • Participate in hazardous operations reviews and project safety reviews and support the plant's safety, health & wellness environmental and industrial hygiene programs. Initiate and drive and execute process changes, new processes and equipment, etc., • Adhere to all GMP standards, specifically regarding documentation., • Operating Services Agreement Activities (Services provided 3rd party owner of one production line), • Coordinate operations activities between Roquette and third-party owner, • Maintain communications for operations issues, changes, etc. between Roquette and third-party owner, • Facilitate process improvements for third-party process and assets, • Provide technical support for third-party process, • Provide daily technical oversight and guidance for colloidal manufacturing process, • Proactively network with other Engineering technical disciplines (e.g., Consultants for Materials, Engineering Mechanics, Instruments & Process Controls, Electrical and Energy), plant and business personnel, and suppliers and contractors to improve process reliability, quality, and safety., • Train peers on relevant operational engineering topics. What You'll Need: Education: • 3-8+ years of experience in manufacturing operations, or equivalent experience., • Experience in food/pharma manufacturing operations preferred., • Excellent computer aptitude, communication and interpersonal skills., • Self-directed and self-motivated., • Solid written and oral communication skills., • Ability to work as a team member in a respectful manner in a diverse work environment., • Strong analytical skills with demonstrated ability to consistently solve problems in a decisive and efficient manner., • Demonstrates understanding of statistical analysis to be used for process improvement., • Demonstrates ability to lead root cause analyses and implement corrective actions to prevent recurrence., • Demonstrates understanding of quality control procedures,, • Demonstrates expertise in processing equipment and plant utilities, or equivalent experience at a manufacturing plant., • Interpersonal skills for working in teams across functions., • Experience using and understanding of Enterprise Resource Planning (ERP) and software systems such as SAP, FMEA+, database/SQL infrastructures, and document control a plus., • Travel, some internationally, may be required when collaborating with other manufacturing facilities, for training, etc. AAP/EEO Statement Roquette is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. "AAP, EEO, Drug-Free Workplace" Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. If you identify yourself in this position, please apply byuploading your resume and let's start the journey together! Roquette is proud to be a global company where you can find personal and professional growth through multiple diverse experiences. Roquette strives to create a dynamic workforce while remaining firmly committed to equal opportunity by complying with EEO laws. As we continue to grow, Roquette understands that to be successful we must always be inclusive in our approach. To find out more about our products, values and sustainable development ambitions visit us at ___ and at ___

Manufacturing Engineer Needed For Leading Manufacturing Company This Jobot Job is hosted by: Kevin Finlay Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $100,000 - $135,000 per year A bit about us: My client is a leading manufacturing company and is growing! They are looking to add a Manufacturing Engineer who will participate in identifying waste, defining value streams, productivity optimization, Kanban setups, takt time studies, labor tracking, ergonomics, material flow, pFMEA, and similar Lean Six Sigma tools. Why join us? Compensation Up To $135,000 Other Benefits Include Medical, Dental and Vision 401 (k) with company match Holiday, Vacation and Sick Time Tuition Reimbursement Health Savings Accounts (HAS) Flexible Spending Accounts (FSA) Cigna Wellness Incentive Program Employee Assistance Program (EAP) Short Term Disability Group Life and Accidental Insurance Sun Life – Accident, Critical Illness, and Hospital Indemnity Insurance Smoking Cessation Program Pet Insurance Job Details Responsibilities: Analyze blueprints, specifications, model files (CAD) and other documentation to prepare accurate simulations and supportive data sets / process models for manufacturing projects, particularly those involving insert injection molding of thermoplastics, precision machined components, and/or complex sub-assemblies for the MedTech industry Integrate fully as a partner to Business Development and Solutions Architecture Teams, with primary objective to drive new business opportunities, sales expansion – and further increase competitive advantage through systems engineering and application of Industry 4.0 practices Collaborate with engineering, production, procurement and accounting teams to gather actual cost data, historical summaries of previously quoted business (including tooling costs/lead-times, engineering resource utilization, and achieved manufacturing standards relative to those estimated) with the purpose of refining new business and existing business quotations to drive growth Partner with IT / ERP Teams (Business Analysts) and Manufacturing expand the use of existing systems for real-time / actual data collection, and adoption of new systems for manufacturing data acquisition and process optimization modeling Utilize software tools and engineering knowledge to develop detailed cost models for materials, labor, equipment, and other resources – beyond the print / model provided (look for optimization opportunities) Identify the best possible manufacturing processes and evaluate based on wholistic process flow, all process steps equipment / manufacturing processes for optimized efficiency and cost-effectiveness Generate internal business cases, including projected ROI for CapEx spending justification in collaboration with Accounting Partners; as well as “preferred site” status for manufacturing based on costs, labor availability, and capacity utilization Utilize SolidWorks, CAD/CAM software packages for product DFM, and conceptualization of proposals Utilize and/or identify and Deploy software tools to facilitate data acquisition and analysis, such as Minitab, Sage, Flexsim, Paperless parts or similar Requirements: Bachelor's degree in Engineering (Mechanical, Industrial engineering, Systems engineering, Value engineering) Minimum of 5 years of experience in value engineering, industrial engineering, manufacturing costing, and related role in the manufacturing industry, with specific experience utilizing industry 4.0+ best practices and/or Lea Experience working for a Contract Manufacturer or OEM Strong engineering background with a solid understanding of manufacturing processes, materials, and equipment Knowledge, Skills and Abilities Required: Ability to identify the best possible manufacturing processes Proficiency in using SolidWorks or equipment CAD/CAM software packages for estimating and DFM purposes Experience in product level design for manufacture (DFM) Ability to collaborate across engineering Centers of Excellence for multi-plant vertically integrated proposals Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: CNC Operator/Machinist - 2nd Shift Job ID: 34161 Job Location: Carlstadt, NJ Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: ARDE Inc., the U.S. leader in manufacturing pressure vessels for space applications, is seeking a seasoned CNC Lathe Machinist to join our 2nd shift team. In this role, you will operate CNC machines to produce precision components critical to space exploration. Create and modify programmers and maintain files in accordance with company policy. Essential Functions: \n • 5+ years preferred experience programming and operating CNC lathe machines. \n, • Experience with aerospace-grade materials such as Inconel and aluminum. \n, • Oversaw the running of multiple machines. \n, • Knowledge of precision machining techniques, with a willingness to share knowledge and techniques. \n, • Experienced use of inspection equipment such as Calipers, Micrometers, Thread gauge etc. \n, • Strong attention to detail and problem-solving skills. \n, • Familiarity with lean manufacturing principles. \n, • Conceptual Skill, Process Improvement, Functional and technical Skills, Tooling, Coordination and Measuring Equipment. \n, • Self-Motivated, willing to grow with the organization. Follow detailed work instructions and procedures. \n, • Inspect finished components to ensure quality standards are met. \n, • Maintain a clean and organized work environment. \n, • Collaborate with team members to meet production goals. \n\n Qualifications: \n • High school diploma or equivalent. \n, • 2+ years of experience operating CNC lathe machines. \n, • Thorough understanding and ability to read and interpret technical drawings and blueprints. \n, • Familiarity with Fanuc G-code programming and machine setup. \n, • Ability to follow detailed instructions and procedures. \n\n Preferred Additional Skills: \n • Experience with aerospace manufacturing processes. \n, • Familiarity with handling and cleaning aerospace-grade materials. \n, • Strong attention to detail and ability to multitask. \n\n In compliance with pay transparency requirements, the salary range for this role in the state of New Jersey is $18.50/hr - $59.13/hr. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-AT4 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Job Description Summary: Highly motivated and experienced Operations Manager leading our warehouse operations, customer service, and EHSS functions. The ideal candidate will have a proven track record of success in managing and improving operational efficiency, providing excellent customer service, and ensuring compliance with all safety and environmental regulations. Duties and Responsibilities: • Warehouse:, • Oversee all aspects of warehouse operations, including receiving, storage, picking, packing, and shipping., • Manage inventory organization and ensure that products are shipped accurately and on time., • Own warehouse KPIs and ensure regular rhythms for cycle counting, obsoletion, min/max updates, and 5S optimization., • Supervise and cross train warehouse staff., • Performs other related duties as assigned by management., • Customer Service:, • Ensure excellent customer service to both internal and external customers., • Manage the customer service team and ensure that customer inquiries are resolved promptly and efficiently., • Own Customer Service KPIs and Root Cause Analysis process to ensure issue remediation and no repeat failures., • Streamline processes related to fulfillment, quality approvals, regulatory, and landed costs., • Performs other related duties as assigned by management., • EHSS:, • Owner of general environmental, health, safety, and security (EHSS) performance of the Fairfield, NJ location, • Perform safety audits to verify performance and identify safety hazards., • Lead lean exercises to ensure warehouse, sample, blending, and repacking areas are efficient and organized., • Owner of location security systems & processes, • Performs other related duties as assigned by management. Qualifications: • Bachelor's Degree in Business Administration, Logistics or related field from a four-year college or university., • Certification in Supply Chain and Operations Management, • Computer skills required: NetSuite, MS Office, RF Smart and Zebra., • Minimum five years of experience in a supervisory or leadership capacity, with a strong preference for experience in warehouse operations, customer service, and Environmental Health and Safety (EHS), • Demonstrated proficiency in lean manufacturing principles and continuous improvement methodologies. Exceptional leadership and interpersonal competencies. Proven capacity to operate both autonomously and collaboratively within a team environment.

Department: Reports To: General Manager Physical Demand Level: Light to Medium FLSA Status (US only): Exempt SUMMARY: The Materials Manager oversees and executes the planning and procurement of materials necessary for manufacturing or operations. This role ensures that inventory levels support production schedules while optimizing cost, quality, and delivery performance. The Materials Manager collaborates closely with operations, engineering, and finance teams to drive supply chain efficiency. SUPERVISORY RESPONSIBILITIES: This role does have supervisory responsibilities. ESSENTIAL DUTIES & KEY RESPONSIBILITIES: • Develop and maintain materials planning strategies to meet production and sales demand., • Monitor inventory levels and establish reorder points to minimize shortages and excess stock, in collaboration with Production Control., • Execute the quoting and purchasing steps for production materials as well as MRO requirements., • Implement and maintain ERP system parameters (lead times, BOM accuracy)., • Monitor supplier performance (quality, delivery, cost) and support corrective actions when needed., • Collaborate in sourcing initiatives and vendor selection processes., • Supervise receiving, and distribution of materials to Production Control., • Ensure proper documentation, labeling, and traceability of materials., • Ensure materials availability to meet production schedules and customer delivery requirements., • Work closely with production planning to resolve material shortages and schedule changes., • Support new product launches working with Production and Engineering by ensuring BOM accuracy and material readiness., • Take part in regular production meetings., • Monitor material usage, waste, and inventory carrying costs; implement cost-reduction strategies., • Analyze inventory and supply chain data to drive performance improvements., • Ensure compliance with company policies, industry standards, and regulatory requirements., • Maintain safe work practices within warehouses and storage areas. SKILLS & COMPETENCIES: • Strong analytical and problem-solving abilities., • Excellent communication and cross-functional collaboration skills., • Knowledge of supply chain best practices (lean manufacturing, demand planning, forecasting)., • Experience in purchasing, procurement or materials management in the Metals industry., • Proficiency in Excel and data analysis tools., • Leadership and people-management capability. EDUCATION & EXPERIENCE Required • Bachelor's degree in Supply Chain Management, Business, Engineering, Logistics, or related field (additional experience considered in lieu of degreed candidate), • Minimum three (3) years in materials management, inventory control, purchasing, supply chain, or production planning., • Experience with ERP systems, ideally Infor VISUAL Desired • Prior purchasing/buyer experience, • Manufacturing, distribution, or industrial experience strongly preferred. BENEFITS: • Medical, • Dental, • Vision, • Short Term Disability, • Long Term Disability, • PTO, • Paid Holidays, • Paid Sick Days, • 401K / 401K Company Match, • Life Insurance, • Paid Jury Duty, • Employee Referral Program, • Tuition Reimbursement Program based on job., • Employee Assistance Program SALARY RANGE: $110,000.00 - $118,000.00 / Annually based on experience PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand and hear. The employee is frequently required to walk; reach with hands/arms; lift and/or lower; push and/or pull; and use hands to finger, handle, feel and/or finely manipulate objects. The employee must frequently lift/move and/or push/pull up to 20 lbs. and occasionally lift/move and/or push/pull up to 50 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Use of vision correction is acceptable, if necessary; however, any vision correction apparatus must meet all safety guidelines for the area of activity. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Welding Technician Location: Fairfield, NJ Pay: $20–$40/hour Job Type: Full-Time Position Overview M Force Partners is seeking an experienced Welding Technician to support precision TIG/GTAW welding operations for stainless steel and aluminum assemblies used in high-vacuum applications. This Welding Technician role requires the ability to independently set up and execute welding jobs while producing weldments that meet strict functional, dimensional, cosmetic, and quality standards. The ideal Welding Technician will have strong experience interpreting engineering drawings, weld symbols, and technical documentation while working in precision manufacturing environments with high quality expectations. Key Responsibilities • Perform precision GTAW/TIG welding on stainless steel and aluminum assemblies and components, • Weld high-vacuum components where cleanliness, leak integrity, dimensional control, and weld appearance are critical, • Interpret engineering drawings, weld symbols, specifications, work instructions, and quality documentation, • Independently set up welding jobs including fixturing, fit-up, tack welding, material preparation, and final welding, • Straighten weldments and components as needed to maintain dimensional requirements, • Inspect completed welds for quality, fit, finish, alignment, and compliance with specifications, • Maintain welding equipment, tooling, fixtures, and welding supplies, • Record labor time, production activity, and job progress within ERP systems, • Support 5S, housekeeping, safety, and continuous improvement initiatives, • Follow all workplace safety, quality, and manufacturing procedures, • Work collaboratively with supervisors, coworkers, engineering, and production teams Required Qualifications • High school diploma, GED, or equivalent, • Minimum of 10 years of TIG/GTAW welding experience in precision manufacturing environments, • Strong experience welding stainless steel, • Experience welding aluminum preferred, • Ability to read and interpret engineering drawings, weld symbols, and technical specifications, • Familiarity with welding fixtures, machine shop tooling, and manufacturing equipment, • Ability to work independently with minimal supervision, • Strong attention to detail and commitment to quality workmanship, • Ability to produce welds meeting both functional and cosmetic requirements Preferred Qualifications • Certification or prior qualification to AWS, ASME, EN, or equivalent welding standards, • Experience with high-vacuum or ultra-high-vacuum welding applications, • Experience with leak-tight welding requirements, • Familiarity with ISO 9001, AS9100, or similar quality systems, • Experience using ERP systems for labor tracking and production reporting, • Familiarity with lean manufacturing and 5S practices Job presented by M Force Partners M Force Partners is a specialized recruitment partner connecting top-tier talent with leading organizations. With a deep understanding of engineering/technical, medical, professional and executive disciplines and industry demands, we deliver tailored recruitment solutions, including direct hire and contract placements, to ensure the right fit for both candidates and clients. If this role isn’t the right fit for you, we encourage you to explore our other opportunities at mforcepartners.com. Do you know someone who may be a great match? Feel free to share this opportunity within your network. Equal Opportunity Employer M Force Partners is an Equal Opportunity Employer. Employment decisions are based on qualifications, merit, and business needs. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. Company DescriptionM Force Partners is a specialized recruitment partner connecting top-tier talent with leading organizations. With a deep understanding of engineering/technical, medical, professional and executive disciplines and industry demands, we deliver tailored recruitment solutions, including direct hire and contract placements, to ensure the right fit for both candidates and clients. If this role isn’t the right fit for you, we encourage you to explore our other opportunities at mforcepartners.com. Do you know someone who may be a great match? Feel free to share this opportunity within your networkM Force Partners is a specialized recruitment partner connecting top-tier talent with leading organizations. With a deep understanding of engineering/technical, medical, professional and executive disciplines and industry demands, we deliver tailored recruitment solutions, including direct hire and contract placements, to ensure the right fit for both candidates and clients.\r\n\r\nIf this role isn’t the right fit for you, we encourage you to explore our other opportunities at mforcepartners.com.\r\n\r\nDo you know someone who may be a great match? Feel free to share this opportunity within your network

JOB SUMMARY The Quality Assurance Manager is responsible for leading all aspects of quality assurance and quality management at the manufacturing facility, ensuring compliance with the most recent AS9100 standards, and customer-specific aerospace requirements. This hands-on leadership role directs our Quality Management System (QMS) to ensure zero-defect culture, product conformity, and continuous improvement in fastener production. REPORTING TO General Manager ESSENTIAL JOB FUNCTIONS • QMS Maintenance & Compliance: Maintain and improve the AS9100-compliant Quality Management System. Act as the primary point of contact for internal audits, customer audits, and registrar certification bodies., • Production Quality & Product Conformity: Oversee inspection, testing, and release of fastener components. Ensure First Article Inspections (FAI) are performed per AS9102 requirements., • Corrective & Preventive Action (CAPA): Lead the Corrective Action Board, manage the CAPA process, conduct root cause analysis (8D, 5-Why), and verify the effectiveness of actions taken., • Material Review Board (MRB): Lead MRB activities to evaluate and dispose of nonconforming materials (deviation, waiver, rework, scrap) according to AS9100 and customer standards., • Supplier Quality & Surveillance: Collaborate with procurement to audit and approve suppliers. Ensure incoming materials meet raw material specifications (AMS, ASTM)., • Calibration Control: Oversee the calibration system for measuring equipment (gages, micrometers, CMM) to ensure compliance with AS9100 requirements., • Leadership & Development: Supervise, train, and mentor QA personnel (Inspectors, Lab Techs, Quality Engineers)., • Reporting: Analyze and report monthly Cost of Poor Quality (COPQ) and key performance indicators (KPIs) to management. SKILLS and ABILITIES • Technical experience and knowledge of CNC machining (CNC Swiss screw machining is a plus), • Knowledge of and/or ability to learn about metal materials and their standards (examples include stainless steel, exotic metals, brass, aluminum, nylon, etc.), • Statistical background is a plus, • Ability to learn and utilized an ERP systems, • Proficiency in interpretation of specifications and engineering drawings including geometric dimensioning and tolerancing (GD&T)., • Ability to participate in internal and external audits., • Strong communication skills., • Cross-functional work experience in major areas such as product engineering, supply chain management, project management, manufacturing, or operations., • Demonstrates basic understanding lean principles that can be applied through successful completion of assignments., • Good written and verbal communication skills., • Knowledge of ISO9001 and AS9100 management systems., • Working knowledge of measurement instruments., • AS9102 FAI inspection preferred., • Knowledge of Microsoft Office applications., • Strong attention to detail and the ability to follow verbal and written communications., • Familiar with GAGE Trak/ Ape software or similar software. EDUCATION and EXPERIENCE • Bachelor's degree in engineering (Mechanical, Metallurgy, Industrial) or a related technical field is preferred., • 5-10 years of manufacturing quality experience and/or machining experience, with at least 3 years in a supervisory role. (Aerospace/Defense is a plus)., • Audit Experience: In depth knowledge and understanding of going through AS9100 recertification surveillance audits., • Aerospace Knowledge: Deep understanding of AS9100 Rev D standards, NADCAP, and FAA regulatory requirements., • Fastener Expertise: Familiarity with fastener manufacturing processes (Swiss screw machining, heat treating, plating) and aerospace product specifications (AMS, ASTM)., • Technical Skills: Experience with FAI (AS9102), GD&T (Geometric Dimensioning and Tolerancing), and SPC (Statistical Process Control)., • Tools: Proficient in Quality Management Systems (QMS) software and Microsoft Office Suite., • Certifications: ASQ certifications (CQE, CQM) are highly preferred., • Must be able to communicate effectively with management, customers, suppliers, and shop personnel., • Experience using inspection equipment, such as micrometers, calipers, plug gages, Keyence, Optical Measuring instruments, and coordinate measuring machines Programming (CMMs), etc. PHYSICAL REQUIREMENTS • Position needs to frequently move about inside a manufacturing environment., • Ability to lift, up to 30 pounds., • Vision and depth perception suitable for use of inspection equipment. EEOC Statement: MW Industries, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Crane Aerospace and Electronics has an exciting opportunity for a Sr. Manufacturing Engineer Managerat our West Caldwell, NJlocation. About Crane: Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You'll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS). Every time you use phone navigation, make a bank transaction or have food delivered to your home, Crane Aerospace & Electronics Microwave product is hard at work. Located in the tight-knit, family-first West Caldwell, NJ., community, our West Caldwell facility supplies industry-leading microwave components and systems for use in space, defense and commercial applications, including GPS III satellites. With more than 60 years of expertise, our Microwave group has proven capabilities in major military, communications, electronic warfare, radar and satellite systems. Start the next chapter of your career with Crane Aerospace & Electronics! Job Summary: The Senior Manufacturing Engineer Manager leads the Manufacturing Engineering team, overseeing machining and special process development, CNC and CMM programming, tool and fixture design, and process validation. This role supports Value Stream leadership in productivity improvement, lead time reduction, and New Product Development (NPD) activities, ensuring all customer and internal cost requirements are met or exceeded. Key Responsibilities: • Oversee development and optimization of manufacturing processes including assembly, testing, tooling, fabrication, and SPC while ensuring compliance with company policies, customer requirements, and AS9100 standards., • Drive continuous improvement through setup reduction, visual standard work, cost-reduction initiatives, Value Stream Mapping, and Kaizen activities aligned with Crane Business Systems (CBS)., • Evaluate and approve engineering requests, determining feasibility, make/buy status, and workload priorities; collaborate cross-functionally to ensure cost-effective manufacturing for new and revised products., • Prepare and manage departmental budgets; oversee justification, selection, and acquisition of capital equipment to support operational efficiency., • Support New Product Introduction (NPI) activities through participation in IPTs and ensure successful internal manufacturing readiness., • Provide leadership and guidance to assigned personnel, ensuring adherence to company policies, work rules, and applicable Bargaining Unit Agreements. Minimum Qualifications: * Experience: 8+ years of relevant experience demonstrating expertise in manufacturing engineering and process development. * Knowledge: Strong understanding of continuous improvement tools, raw materials, production processes, quality control, and cost optimization techniques. * Skills: Critical thinking, time management, decision-making, and excellent communication skills; ability to motivate and develop teams effectively. * Education: Bachelor's degree in electrical, Electro-mechanical, Industrial, or Mechanical * Eligibility Requirement: This position may require access to Controlled Data or Information. Where the position requires such access only US Persons will be considered. As a US Department of Defense contractor, we are bound by International Traffic in Arms Regulations (ITAR). Preferred Qualifications: • Advanced degree (MBA or MS) preferred. Working Conditions: • Working conditions are normal for a manufacturing environment, • Manufacturing operations may require the use of safety equipment to include but not limited to: eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE, • May be exposed to unusual environmental conditions such as loud noises, cold temperatures, confined spaces, dust or fumes, • Schedule will fluctuate depending on the needs of the business Standing: up to 100% *percentage is approximate and may vary depending on work task Sitting: up to 100% *percentage is approximate and may vary depending on work task Lifting (in pounds): up to 25 pounds Pushing (in pounds): up to 25 pounds Mental/Visual: use of computer Workspace (line, cube, etc):work bench Top Benefits: As a team member at Crane Aerospace and Electronics, you'll enjoy: * Benefits: Health care, dental, vision, life and disability insurance starting the first day of the month * Time Off: 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year. * 401k Retirement Plan: 401k plan with company match * Education Reimbursement: eligible after 6 months of employment You can see a list of our benefits at or visit our website at for more information on our company and great opportunities. We are committed to operational excellence and world class processes. We employ Lean manufacturing techniques to optimize manufacturing efficiency and accuracy on all product lines. Our products are known for their technical strength, proven reliability and overall value. In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check. FAA sensitive positions require employees to participate in a random drug test pool. Salary range: $185,500.00 to $220,000.00. Several factors contribute to actual salary, including experience in a similar role or performing comparable job responsibilities, skills, training, and other qualifications. Some roles may be eligible for participation in performance-based bonus programs. This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Manual Machinist Job ID: 35727 Job Location: Carlstadt, NJ Job Schedule: 2nd Shift 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: ARDE Inc., the U.S. leader in manufacturing pressure vessels for space applications, is seeking a skilled Manual Machinist to join our 2nd shift team. In this role, you will operate manual machines to produce precision components for aerospace applications. Essential Functions: • Operate manual lathes, mills to produce aerospace components., • Read and interpret blueprints, engineering drawings, and specifications., • Perform inspections to ensure parts meet quality standards., • Maintain and troubleshoot manual machining equipment., • Collaborate with engineering and quality teams to optimize production processes., • Follow safety protocols and company procedures. Qualifications: • High school diploma or equivalent., • 2+ years of experience operating manual machining equipment., • Ability to read and interpret technical drawings and blueprints., • Strong mechanical aptitude and attention to detail. Preferred Additional Skills: • Experience with aerospace-grade materials such as Inconel and aluminum., • Knowledge of precision machining techniques., • Familiarity with lean manufacturing principles. In compliance with pay transparency requirements, the salary range for this role in the state of New Jersey is $18.50/hr - $59.13/hr. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-JC4 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Our client, an apparel manufacturing company, is seeking a Production Manager to join their team in Secaucus, NJ!.

Assist in ensuring compliance with sanitation standards and training associates assigned in the Perishable departments using the Cleaning Schedule.

Obtain clean orders at the best possible price.

Monitor and maintain restaurant cleanliness, sanitation standards, and adherence to food safety regulations. Conduct regular inspections and audits to maintain restaurant cleanliness, safety, and operational standards.

Conduct safety meetings in absence of the Store Manager; help to maintain a clean, well-organized store and facilitate a safe and secure working and shopping environment.

Maintain studio cleanliness and brand standards.

Projects include laboratories, vivariums, pilot manufacturing spaces, infrastructure upgrades, and related facilities.

APM Terminals is seeking a collaborative, steady, and Lean-minded operations leader who enjoys working with people, thrives under pressure, and leads with clarity and care.