Maintenance coordinator jobs in Carteret, New JerseyCreate job alerts

Job Description Traffic Control Solutions Corp has immediate openings for Traffic Control Technician/Highway Safety Flagger positions in New Jersey for our Bayonne, Barnegat, and Williamstown locations. Call Michele at 609-961-9966 after you read below our hiring requirements, job duties, and compensation. You must fill out questionnaire forst before you call or initial interview can not be performed. You can start work within a few days. Call Today! As the Traffic Control Coordinator/Highway Safety Flagman, you will be responsible for overseeing all traffic management operations for construction and consultant bridge, overhead sign structure, and geotechnical sites, and other projects requiring traffic control. You will ensure the implementation of safety measures, compliance with traffic laws, and the smooth flow of traffic to minimize disruptions. ESSENTIAL FUNCTIONS: • Operate company trucks to transport materials and equipment to job sites., • Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones., • Place temporary construction signs in work areas., • Position arrow boards or variable message boards in work areas., • Set up traffic cones and other traffic safety devices in work areas., • Monitor the work zone throughout the shift to ensure items remain in their proper locations., • Collect and load traffic control items at the beginning and end of shifts., • Install, remove, and reset delineators, signs, posts, and supports., • Perform shop work, including general maintenance and repair of equipment., • Follow all safety rules and regulations to ensure a safe work environment., • Adhere to all Company Policies and Procedures., • Perform other work-related duties as assigned., • Valid Driver’s License, with no more then 2 points on liscence and have own vehicle to arrive at our hub location closest to you for work. Please be located within 30 minutes of our hub location to ensure meeting our hiring requirements., • Must be able to pass a background check, including motor vehicle records check before being hired., • Must successfully pass a drug test and meet federal DOT requirements. This includes random test throughout employment. Marijuana is an illegal drug when driving any DOT vehicle., • Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest)., • Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations., • Must be able to read and study state DOT plans and ensure traffic control plans are implemented and maintained., • Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. • Typical job site locations are within 2 hours of the dispatch hub. Starting pay is $20.00 per hour, with a maditory 30 minuet unpaid lunch break. Employee must bring lunch to work. The sucssesful completion of the online ATSSA Flagging course must be completed within the first 30 days of employment., • After 6 months of employment, and having proven the knowledge and leadership to be a TCC foreman, a TCC course will be made available, which rewards an immediate $5.00 per hour raise., • A times, our customers have projects that require us to pay our Traffic Control Technicians prevailing wage rates. Those rates vary from $80.00 - $100.00 per hour. The jobs are offered to employees who demonstrate the worth ethic, availability, and knowledge of his/her position., • Some of our customers have projects that are further than two hours away from our hub locations. These locations will be classified as travel overnight jobs. All employees are required to do at least one week's worth of these travel jobs per month, if these jobs are available. Typically, these jobs run from monday through thursday.In order for our employee's to be home by thursday evening. These jobs pay an additional $5.00 per hour, including travel hourly pay to a hotel where the job site is located at company's expense., • Typical scheduled shifts are 70% day, 25% night, and 5% weekends. All applicants must have availability to be scheduled for any of these shifts. Our schedule is sent out by 5pm the previous day. Traffic Control Solutions offers a flexible shift off policy requiring 2 weeks notice for a shift unable to have ability for. Traffic control solutions is required by the state of new jersey to provide full-time, part-time, and temporary employees with up to 40 hours of earned sick leave per year to care for themselves or a loved one, including chosen family. HIRING PROCEDURE AND TIME FRAME: Once an applicant calls our office, a hiring supervisor will conduct a pre-screening interview to ensure the applicant meets hiring requirements and understands the job responsibilities. If an applicant meets the requirements, the hiring supervisor will email a hiring application to complete. Once the applicant has completed the application, an MVR must be obtained from the DMV. An MVR is given to a motorist immediately by the DMV; it is the driver's motor vehicle driving history. Once obtained, the MVR, along with the application, a copy of the driver's license, and a copy of his/her social security card, must be scanned and emailed back to the hiring supervisor using a cam scanner app on his/her phone. If all paperwork is completed and submitted, and it's entirety. We will immediately put you on the schedule for work. You will be required to purchase a hard hat and a class three vest. Steel toe boots, gloves, and work pants are required safety apparel that are required to be worn on our job sites. Call Michele at 609-961-9966 between the hours of 8:00am - 4:00pm, Monday thru Friday and start your journey with Traffic Control Solutions today! Company DescriptionTraffic control solutions is a highway safety company, providing lane closures and flagging services for state and local projects.Traffic control solutions is a highway safety company, providing lane closures and flagging services for state and local projects.

Job Description We're looking for Automotive Mechanics with a minimum of 1 year of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As a Brake & Tire Technician, you'll be expected to perform light maintenance or repairs, including changing brakes and tires and performing: • Technician services, such as routine inspections/maintenance, • Basic mechanical repair for brake pads/calipers/rotors, tire installations, and wheel alignments Starting Pay: $19-$23 per hour At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires, • Mid-Level (Mechanical Repair / Build / General) Technician (min 3 years of professional experience): perform light to medium automotive repairs and minimal diagnostics on our vehicles, • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description We're looking for Automotive Mechanics with a minimum of 6 months of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Entry-Level Technician, you'll be expected to perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. Starting Pay: $18-$20 per hour How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 508-4749, Monday through Friday, between 6 AM and 4 PM MST. Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires, • Mid-Level (Mechanical Repair / Build / General) Technician (min 3 years of professional experience): perform light to medium automotive repairs and minimal diagnostics on our vehicles, • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job DescriptionAs a Group Fitness Instructor, he/she is responsible for providing group fitness instruction while monitoring and educating members on fitness and safety in an enjoyable atmosphere. Live by the RETRO values integRity, dEdication, consisTency, expeRience and innOvation! Responsibilities of Group Fitness Instructor Teaching scheduled classes, beginning & ending on time. Providing adequate warm-up, class content, stretching & cool down. Instruction to class participants on effective workout methods while demonstrating proper technique. Preparation of appropriate equipment and music for each class. Maintaining a positive experience for members and class participants. Assisting facility management in promotion of Retro Blends Smoothies, new products, & promotions. Continued maintenance/building of class participation & offerings. Environment Working environment is inside Retro Fitness Outlet. Working hours could vary and include mornings, evenings, and weekends. Direct report This position is supervised by the positions below and in order of: Group Fitness Coordinator Retro Fitness General Manager Retro Fitness Mission Statement Retro Fitness is a Health Club built on the respect and dedication for each of our members who entrust us to help them achieve their health and fitness goals. Our mission is to provide a consistent and innovative customer experience for each member to realize their true fitness potential; making America a healthier place 1 visit, 1 rep, 1 mile at a time. Qualifications for Group Fitness Instructor Current Group Fitness certification/multiple specialized certifications preferred. CPR/AED certification. Ability to motivate members towards participating in Group X Fitness classes. Strong desire to help and assist members in reaching their overall health and fitness goals. Successful completion of all Retro University courses. Following company policies & procedures.

Job Description POSITION SUMMARY: Under the direction of the Director, Senior Director, or the Director of Operations, the Coordinator will oversee and coordinate the day-to-day operations and functions of their assigned department. ESSENTIAL FUNCTIONS: 1. Ensure all health and safety guidelines are strictly adhered to., 2. Supervise and coordinate day-to-day operation of assigned area, keeping the Director/Senior Director or Branch Director of Operations up-to-date on operations and concerns., 3. Schedule staff and ensure adequate coverage and ensuring department staff are utilized effectively., 4. Train, coach and provide leadership to staff., 5. Be the liaison between Director/Senior Director or Branch Director of Operation and department team., 6. Implement and give oversight to department needs (events, projects, work processes)., 7. Lead support to YMCA events and be a department champion to have all staff engaged in events and functions (i.e. Healthy Kids Day, Halloween event, Branch Run, online classes, Chronic Disease programming, etc.)., 8. Work closely with the Director/Senior Director to ensure that budgets are executed and maintained., 9. Ensure department is in compliance with YMCA standards, adhering to YMCA policies, guidelines and best practices and where applicable all staff are maintaining their certifications and training requirements., 10. Conduct or be a key presenter at staff meetings., 11. Work closely with Director/Senior Director as part of the Fund Raising Team., 12. In conjunction with Director/Senior Director regularly evaluate department needs to ensure department is operating effectively and efficiently., 13. Complete all administrative functions in a timely, accurate manner; including but not limited to: staff paperwork, accident/incident reports, staff meeting notes, processing of ADP payroll, accurate and up-to-date records of current certifications and or staff certifications as required per assigned area., 14. Perform daily department tasks and department functions as assigned by Director/Senior Director or as required for department (examples: equipment maintenance, Daxko toolbox oversight, program supplies purchased, teach classes, provide direct program oversight)., 15. Maintain a clean and safe work environment., 16. Emulate the four core values of the YMCA to member and staff on a consistent basis. REQUIREMENTS: · Exceptional communication and organizational skills, as well as relationship building skills. · Strong supervisory and leadership skills. · Strong and proven background in the area of oversight (examples: Wellness, Member Service, ASC, etc.). · Departments may have specific requirements (example: Wellness and Fitness: CPR, First Aid, AED, Nationally Recognized Certifications; Member Service: Daxko proficient, Member Services Training; After School Care: Completion of Working with Children trainings, etc.). PHYSICAL REQUIRIEMENTS/WORKING CONDITIONS: Normal and reasonable amounts of walking, standing, bending, lifting, pushing pulling, reaching, reading, typing, for department specific areas.

Job Description LABORATORY MANAGER 1.0 Corporate Job Title Laboratory Manager 2.0 Reporting Relationships Branch Manager for day-to-day laboratory responsibilities and Laboratory Director for quality systems responsibilities. 3.0 Position Summary Manages and coordinates laboratory functions for the branch. Provides guidance, leadership and training to laboratory staff on routine matters. Responsible for taking the necessary steps to ensure that all laboratory functions and resources are run safely, accurately and efficiently. 4.0 Minimum Requirements • Requires a B.S. (preferable Chemistry degree) with a minimum of five years general laboratory experience or three years experience in a petroleum laboratory., • Must possess managerial and inter-personal skills., • Must be able to distinguish color., • Must pass pulmonary test for respirator use. 5.0 Responsibilities • Acts as the liaison between Laboratory Coordinator and general laboratory staff with respective Branch Manager, Operations Department and Laboratory Director., • Works closely with Operations Department to obtain day-to-day analytical testing requirements based upon nominations received from clients in order to provide accurate, reliable results on a timely basis. Works directly with customers for laboratory submitted samples if required., • Ensures that laboratory staff and visitors follow all documented safety requirements as defined by the company safety program., • Uses judgment and discretion in directing, coordinating and scheduling the work activities of laboratory staff consistent with accepted operating practices and procedures, including periods during non-working hours, weekends and holidays., • Receives, compiles, and verifies the data resulting from laboratory analyses and ensures accurate and complete preparation of applicable reports as per standard procedures., • Works in conjunction with the Laboratory Director to maintain internal quality control / quality assurance program to ensure the use of standard laboratory practices., • Works with laboratory staff to analyze and compile round robin and quality control sample results to ensure operating efficiency of process and/or testing equipment., • Ensures the laboratory has the equipment and supplies necessary to meet customer demands and established quality program. Manages equipment and supply inventory, including scheduled preventive maintenance requirements of the equipment. Coordinates the replacement or repair of faulty equipment or supplies as needed., • Responsible for the maintenance and control of the sample retain area, including standard cradle-to-grave sample requirements and waste disposal., • Ensures that laboratory staff is qualified to perform necessary testing and meets the training / refresher training requirements of the quality system. Ensures Test Method Assessments, • (TMA’s) are conducted as per the required procedure and schedule., • Using advanced knowledge gained in the laboratory, identifies the root causes of quality system problems (customer, specifications or Camin Cargo system) in respective areas of responsibility and uses good judgment to independently troubleshoot, initiate, recommend, and/or implement timely solutions to the problems. 6.0 Fitness for Duty – Physical Demands Workday may consist of 8-12 hours however this can vary day to day and shift to shift. Some of the retain work is performed outdoors, wearing full Personal Protective Equipment (PPE), and could include possible exposure to high and low temperatures for a prolonged duration of time. Laboratory work is normally performed indoors under climate-controlled conditions. All times listed in the table below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 1 hours. • Walking Weight Up to 45 lbs. -Duration/Day Up to 10 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 1 hour • Carrying Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 12 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs.- Duration/Day Up to 1 hour • Sitting Weight 5-8 lbs. -Duration/Day Up to 6 hours • Driving Weight N/A- Duration/Day Up to 6 hours All are required to perform this position This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Camin. All rights reserved.

Job Description OrthoPediatrics Specialty Bracing: As a leader in specialized pediatric orthotics, we take great pride in having the industry's top clinicians, technicians, and administrative staff, led by an executive team dedicated to advancing the orthotics and prosthetics profession. We have recently joined forces with OrthoPediatrics as their Specialty Bracing division to help more KIDS! Our Vision: To be recognized as the premier provider of pediatric orthotic and prosthetic services and products in the United States. Our team believes in respectful truth and transparency when interacting with patients, referral sources, and our own team members. We hold ourselves accountable for providing only the best products and services to our patients. Our team is engaged and committed to continuous improvement of our products, our patient care, and ourselves. Position Description: Our Patient Care Coordinators are our first point of contact with our patients and referral sources and are the face of our company. To be successful in this role the Patient Care Coordinator will enjoy interacting with children, be detail oriented and have strong organizational and people skills. In this role the ability to multitask in a fast-paced environment and being a team player are integral. A high level of discretion to maintain confidentiality of sensitive information is a desirable attribute; along with the ability to work with minimal supervision, handle pressure and meet deadlines. Core Responsibilities: Customer Service: • Greeting patients, • Checking patients in and out, • Multi-line phone coverage, • Liaison for referring physicians/groups, • Register patients by collecting insurance information, demographics, etc., • Detail oriented, • Able to provide general company and services information, • Good verbal and written communication skills, • Compassionate, efficient, and professional, • Initiate product delivery to patients at checkout, including contact with referring physician and/or insurance companies. Administrative: • Verify patient insurance and initiate prior authorizations, • Collect patient balances, • Coordinate with referral sources to obtain physician schedules, • General chart maintenance using Athena software, • Scan and upload documents to electronic chart, • Support the clinic staff and office flow, • Chart checks for fitting appointments using the standard checklist form, • Work closely with billing team to ensure all documentation for claims are uploaded, • General office organization, • Following standard practices to deliver patient devices, • Ability to multi-task, • Adaptable to a dynamic environment, • Exceptional computer skills, • Maintain HIPAA compliance Schedule Maintenance: • Coordinate and schedule all appointments., • Review patient no shows daily: call, document, and reschedule appointments Education/Experience: High School or Associate Degree; related experience and/or training. Position Requirements: • Entry Level - experience in a healthcare environment a plus, • Computer competency skills (Excel, Word, Outlook), • Excellent organization and communication skills, • Ability to manage multiple tasks, • Excellent customer service skills, • Professional phone manner, • Ability to work well with others Benefits Offered for Eligible Employees: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Long & Short-Term Disability, • Life Insurance and AD&D, • Retirement Savings Plan OPSB is proud in its commitment to creating a diverse workforce and providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, parental status, national origin, age, disability, citizenship status, genetic information or characteristics, marital status, status as a Vietnam era veteran, special disabled veteran, or other protected veteran in accordance with applicable federal, state and local laws, and any other characteristic protected by law.

Job DescriptionCompany Description Stratas Foods LLC is the leading supplier of fats and oils to the Foodservice, Food Ingredients and Retail Private Label markets in North America and is a producer of quality bulk and packaged dressings, mayonnaise and sauces. Stratas Foods was formed in October 2008 as a 50/50 joint venture between ACH Food Companies (ACH) and Archer Daniels Midland (ADM). Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood and Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Job Description The Plant Project Engineer I will provide engineering support and project leadership for the plant The expectation is that this role will spend approximately 60% of the time on project related activities and 40% of the time on plant support activities. At times either activity could exceed expectation. The Plant Project Engineer I role will include project implementation, production and equipment improvement initiatives and support the daily operations of the plant to ensure all safety and quality goals are achieved. Qualifications • Project management, project planning, project coordinator, purchasing, and supervision of contractors for various projects to assure completion on a timely basis within budget., • Adhere to and enforce Good Manufacturing Practices (GMP) and HACCP requirements., • Lead and assist management with appropriate training to assure regulatory compliance., • Report to the Director of Engineering with a dotted line to the Plant Manager., • Maintain appropriate communication/relationships with all employees, vendors, visitors., • Provide the necessary safety training to contractors and others as necessary., • Follow, monitor, and ensure compliance with all safety, food safety, environmental, GMP rules, regulations, and policies., • Attend daily production/quality meetings., • Provide technical support for plant processes and improvements., • Observe facility operations and assist with problem solving on a regular basis., • Excellent oral and written communication skills with proven ability working well with people., • Ability to identify critical areas for improvement and develop plans for correction., • Competent in making sketches, drawings, line layouts, plans etc., and written instructions as necessary to affect equipment maintenance / repair., • Participative team attitude skills with all personnel to assure production standards, safety, and sanitation levels are maintained as defined by the Mission Statement., • Good skills in ammonia refrigeration, steam generation and PLC’s., • Good problem solving skills through team and individual efforts. BS degree in engineering or technical related area from an accredited college/university; Chemical, Electrical, or Mechanical preferred Related Experience Proven Engineering experience of 3 – 5 years, project management is a plus Equipment/Software Skills Working knowledge in personal computers (Microsoft software necessary, Project management, Microsoft Project preferred) and basic understanding with Allen Bradley PLC. Knowledge of CMMS such as MP2 is a plus. Must have good working knowledge of general PC systems. Certifications, Licenses, Registrations None required, any maintenance related licenses would be a plus such as PE, ASME welding, PLC’s , wastewater, etc. Additional Information Physical: While performing the duties of this job, the employee is regularly required to walk, sit, and stand. The employee will also be required to use hands, arms and fingers. Must have the ability to lift 50 pounds. Ability to walk distances across facility, climb steps and ladders on occasions, sitting at office desk work, sometimes in cooler atmosphere ( 35-45 degrees) , sometimes in engine room ( + 95 degrees in hot months). Language Bi-lingual is preferred Sensory: Visual, speaking, and touch is essential. Mental/Reasoning: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form Salary: $122,000 to $153,000 Annual Bonus Incentive: 5% Benefits: Medical, Dental, Vision Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, military/veteran status, and any other legally protected status. Pay Transparency Nondiscrimination Provision-The Employer will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Employer’s legal duty to furnish information. 41 CFR 60-1.35(c) Stratas Foods Applicant Request for Accommodation Form: Stratas Foods California Privacy Rights Act Policy:

Receives New Installation Maintenance audit reports; updates JobSight and sends to New Installation Maintenance Audit email. Operations Coordinator- New Installation. Responsible for coordinating all administrative duties associated with the branch New Installation operations department so that the