Trabajos maintenance man en Denver, ColoradoCrear alertas

Job DescriptionLocation: Canon City Agg/Asp CO Job Req ID: 16254 Join our amazing team and contribute as a: Aggregate Maintenance Technician - Swing Shift ABOUT THE ROLE Aggregate Maintenance Technician-Swing Shift is responsible for maintaining mining processing equipment in a state of readiness. Performs the appropriate inspections, repairs, and preventative maintenance on processing and conveying equipment. Prepares all required daily/weekly department operating reports. (3,500 SIGN ON BONUS) WHAT YOU'LL ACCOMPLISH • Schedules and performs preventative maintenance on plan equipment by following the manufacturer's recommended service intervals and company procedures., • Maintains an inventory of regularly required replacement parts., • Inspects condition and operation of plant equipment and performs necessary repairs and adjustments., • Reports required repairs or other findings to Supervisor., • Performs required emergency repairs on production equipment required to address plant breakdowns., • Adheres to all safety, environmental and company policies and procedures in completing daily tasks, and completes all required paperwork in a timely fashion., • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. WHAT WE'RE LOOKING FOR • Required Education:High School diploma/equivalent, • Required Work Experience: Experience in mechanical repair, installation, and construction in industrial environments., • Must have basic mechanical aptitude and general industrial maintenance to include: stick welding, arc welding, lite fabrication, cutting torch, and wrenching (hand tools)., • Preferred experience operating a skid-steer, man-lift, and other industrial equipment, • Computer and Software Skills: Basic computer skills. Additional Requirements: • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. WHAT WE OFFER • Competitive salary, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings, • Medical, Dental, Disability and Life Insurance, • Holistic Health & Well-being programs, • Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care, • Vision and other Voluntary benefits and discounts, • Paid time off & paid holidays, • Paid Parental Leave (maternity & paternity), • Educational Assistance Program, • Dress for your day Accepting applications until 4/25/2026 HR Contact: Katherine Therese HENNESSY BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. Amrize North America Inc. participates in E-Verify and will provide the federal government with your I-9 information to confirm that you are authorized to work in the United States. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. PROTECT YOURSELF FROM RECRUITMENT FRAUD The only way to apply for a position at Amrize is through our official Careers website. Be cautious of unsolicited offers or requests for information from other sources. Learn how to protect yourself from recruitment fraud here: Fraudulent Job Offers Policy

Job Summary Coordinates, inspects and performs the assembly, installation and repair of components, subsystems and systems for the sheet metal trade during the construction, tenant finish-out or remodel of commercial buildings and industrial facilities. Essential Duties • Coordinates activities of assigned craft workers (sheet metal trade) to ensure efficient workflow and productivity within the crew, contributing to the successful completion of projects., • Provides guidance, mentoring, and training to the crew. Conducts tool box talks as required., • Plays a key role in job planning for work packages and construction/manufacturing schedules, ensuring projects are well-organized and executed efficiently., • Operates and supervises operation of equipment and machinery such as backhoes, forklifts, man lifts, power tools and tampers. Works with tools to meet construction schedules or other demands., • Inspects work in progress and completed work to ensure work meets quality and productivity expectations. Identifies and communicates construction conflicts and material shortages., • Eliminates construction and job site hazards to reduce safety incidents and their severity., • Assists in maintaining assigned tool inventory., • Assists the crew Foreman in producing quality work and a positive experience for the customer., • High School Diploma or GED. Technical training in a related field such as HVAC or construction is preferred, • Must hold an appropriate equipment certifications, • 5+ years of experience in sheet metal work or a related construction field, • Ability to produce quality work in an efficient manner, • Demonstrated ability to take initiative and provide leadership, • Good communication skills - both written and verbal, • Demonstrated organizational and planning skills, • Must comply with all safety processes and procedures Grow Your Career with TDIndustries Founded in 1946, TDIndustries is a premier, employee-owned Mechanical, Electrical, and Plumbing (MEP) company delivering full-lifecycle building solutions-from design and construction to service and facilities maintenance. We power critical environments like hospitals, schools, data centers, stadiums, and commercial buildings across Texas and the Southwest. Our Partners (employees) are the core of our success. As an employee-owned company, you have a voice, a stake, and a clear path to grow. Recognized by FORTUNE Magazine as a "100 Best Company to Work For," we invest in top training, career development, and a culture built on trust and servant leadership. Join a growing team where your skills matter, and your future is built to last. At TDIndustries, we believe opportunity should be built - and shared - by all. Whether you work with tools or technology, in the field or the office, we hire and grow people based on skill, potential, and integrity - never labels. We value the diverse paths that bring people to our team and welcome Partners of all backgrounds, including differences in race, color, religion, sex, gender identity or expression, sexual orientation, age, ability, military service, and more. What matters most is how we work together to build excellence.

Job Description POSITION TITLE: LAND SURVEY CREW CHIEF POSITION DESCRIPTION Work consists of Land Surveying Field Work, in support of commercial/residential and similar land development design and construction, including, but not limited to: • Construction staking and layout (site staking, utility staking, building staking, foundation staking, form checking, etc.);, • Topographic Surveying;, • ALTA/NSPS Land Title Surveys;, • Boundary Surveys;, • Volume Surveys;, • Perform daily downloads of data collector files;, • Prepare field notes, sketches, and photos;, • Adhere to company protocols for maintenance and upkeep of survey equipment and vehicles;, • Perform initial control, secondary control, & construction layout with field crews as necessary. Performance of the required duties will require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Performing this job requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear, stand, climb, balance, stoop, kneel, crouch, or crawl. Employee must occasionally lift and/or move up to 75 pounds. While performing the duties of this job, the employee regularly works on-site at the construction work site where the employee is exposed to moving mechanical parts; high precarious places; fumes or airborne particles; outside weather conditions and risk of electrical shock. The noise in these work environments is usually moderate to very loud. MINIMUM REQUIREMENTS • An equivalent combination of 4 years+ of progressive experience and/or education in performing all aspects of land surveying field work;, • Knowledge of surveying principles and practices, engineering design & construction;, • Valid Driver’s License with verifiable clean driving record;, • Ability to work independently or manage a 2-man crew;, • Versed in the use, care, and maintenance of Trimble Robotic Total Station, Trimble TSC5/TSC7 Data Collectors, and Trimble GPS Receivers;, • Versed in Trimble Controller software and Microsoft Office products (specifically Xcel and Word) DESIRED ADDITIONAL SKILLS • Knowledge of AutoCAD Civil3D and Carlson Surveying software a plus;, • Large project survey including commercial high rise, campus style apartments, senior living, retail and infrastructure projects a plus. COMPENSATION • This is a non-exempt, full-time position. The expected hourly rate ranges from $24.00 to $30.00, depending on experience and qualifications (hourly rate may increase beyond $30.00 depending on experience, qualifications, education, registration, etcetera). ADDITIONAL BENEFITS • Profit Sharing Program;, • Employer pays 80% of Medical, Dental, and Vision Insurance premiums;, • Employer pays 100% of Short Term Disability, Long Term Disability, Life Insurance;, • 401(k) Retirement Plan up to 4% match;, • Paid Time Off (80 hours Vacation, 48 hours Sick Time). REPORTS TO • Field Operations Manager, • Survey Project Manager, • Vice-President | Director of Survey

Job Description Job Summary: The Fire Alarm Technician is responsible for the installation, testing, inspection, service, and repair of fire alarm systems. Respond to emergency and maintenance calls and troubleshoot/replace faulty devices to restore alarm panels to “normal condition”. Complete inspection and service reports. Supervisory Responsibilities: • None Essential Job Functions: • Travel to customer locations to perform installation, service, and upgrades of fire alarm systems., • Respond to emergency situations during and after business hours to resolve safety concerns., • Perform Annual and Semi-annual inspection of Life Safety Systems., • Write and provide inspection/service reports on tested equipment and devices. Indicate any deficiencies or corrections that need to be made., • Troubleshoot and diagnose faults or malfunctions in fire alarm systems and take appropriate actions., • Perform system upgrades, modifications, and expansions as necessary., • Collaborate with customers, contractors, and other team members to ensure efficient and effective installation and maintenance of fire alarm systems., • Maintain accurate records of work performed, including service reports, inspection reports, and equipment inventory., • Provide technical support and guidance to customers regarding fire alarm systems, including system operation, maintenance, and troubleshooting., • Stay current with industry trends, codes, regulations, and technological advancements related to fire alarm systems., • Adhere to safety guidelines and practices, both for personal safety and the safety of others., • Performs other related duties as assigned. Experience & Qualifications: • High School Diploma or GED required. Additional technical certifications or training in fire alarm systems is strongly preferred., • Knowledge of basic electricity and the ability to read electrical schematics., • Proven experience working as a Fire Alarm Technician is preferred., • Willing to support training/development for entry-level candidates. Technical aptitude preferred., • Solid Knowledge of fire alarm systems, including installation, maintenance, troubleshooting, and repair is preferred., • Familiarity with relevant codes, regulations, and standards, such as NFPA 72, NEC, and local fire codes is preferred., • Proficiency in reading and interpreting blueprints, schematics, and technical manuals is preferred., • Strong problem-solving skills and the ability to diagnose and resolve issues efficiently., • Excellent attention to detail and organizational skills., • Strong communication and interpersonal skills to effectively interact with customers and team members., • Ability to work independently and prioritize tasks effectively., • Maintain a valid driver's license and ability to pass a drug and background check. Physical Requirements: • Regularly required to stand, walk, talk, hear and have full use of hands. The employee is occasionally required to sit, reach with hands and arms, climb or balance, and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • Ability to work from a ladder, and in some case, a man-lift., • Must be able to operate a motor vehicle and travel daily. We are an equal opportunity employer that welcomes and encourages diversity in the workplace. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.

Job Description Overview Founded in 1967, ImageFIRST® is the largest and only national linen rental and laundry service specializing in the healthcare market. Acquired by private equity firm Calera Capital in 2018, ImageFIRST serves medical facilities nationwide providing linen, patient gowns, scrubs, and more while managing their clients’ linen inventory for cost management. As leaders in infection prevention, they currently own and operate the most HLAC-accredited facilities in the industry. With one of the highest customer retention rates in the industry – 97% – ImageFIRST is dedicated to improving patient satisfaction and making staff happy with our white glove service! Check out our company page: Responsibilities This is a route-based service-oriented position requiring the employee to establish, maintain and build strong customer relationships through responsive and creative sales and service strategies. To grow existing customer business through sales and retention programs, to provide prompt, effective solutions to customer needs, to maximize route revenue through improved time management and upgraded product mix, to maximize contract terms by identifying changes in programs that require updated paperwork and to be ImageFIRST’s “face” to our customers and potential customers. Schedule: Monday - Friday Pay: $100k per year RESPONSIBILITIES: • Support: Promote our values and the ImageFIRST way to build the company by positively impacting the lives of our associates, customers and community, • Customer Relationships: Handle all administrative aspects of sales, identify and resolve customer concerns, ensure customer satisfaction with company products and services, develop positive relationships with principal customer contacts, maintain enthusiastic and professional attitude and maximize customer contract term, • Route: Manage route to maximize efficiency, productivity and revenue: operate company equipment safely and responsibly, comply with applicable rules and regulations relating to safety and operation of commercial motor vehicles, • Sales: Increase account revenue by selling additional products and services, successfully complete sales programs, develop and implement strategies to identify new business opportunities. Meet or exceed sales objectives, • Product Management: load outs, inventories, quality-stains/damage, tape changes, • Product Knowledge: pricing, codes, colors, sizing, changes/quantities, availability, product application, • Load truck: organization, night before service, invoices, check rails, count-by-man, linen control sheet, maintain route books, • Unload Truck: check-in, empty soil carts, weigh carts, • Account appearance: organization of rails, hanger racks, plastic, wet bags, posters and repaid bags, • Truck Maintenance: timely communication of repairs, PM, accidents, • Minimum of 3 years of experience within sales or a route sales role, • Must possess a valid DOT (Department of Transportation) medical certification or obtain one within a designated timeframe., • Ability to lift 25 pounds on a frequent basis, • Ability to drive commercial motor vehicle for up to 10 hours daily, • High School Diploma or equivalent, • Valid Driver’s License and Excellent Driving Record, • Sense of direction/knowledge of area Qualifications Required Competencies: • Be Respectful: Value all we come in contact with, • Be Remarkable: Create a positive moment with every interaction, • Be Safe: Keep ourselves and those around us safe, • Weekly pay, • Medical, Dental, Vision, • Pet, Legal, and Hospital Indemnity Insurance, • 401k (match), • Paid Time Off Package, • Paid Parental Leave, • Tuition Reimbursement, • Referral Program, • Great company culture We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by applicable law. We are fueled by the talent, passion, and diversity of our associates.

Job Description Job Summary: The Fire Inspector/Technician is responsible for the proper inspection, operation, and maintenance of various fire protection systems. Responsibilities include inspecting, testing, and performing system checks. This position also assists in identifying system deficiencies and preparing accurate and timely inspection reports. Supervisory Responsibilities: • None Essential Job Functions: • Conduct routine preventative maintenance, service, repairs and inspections on various fire protection systems., • Complete detailed inspection reports, documenting any issues and report results of work completed in an accurate, timely manner., • Ability to respond to emergency calls and participate in an on-call schedule., • Interact with customers in a mature and professional manner., • Protect and maintain company equipment., • Work in a safe manner at all times by utilizing personal protective equipment in appropriate situations, operate a company motor vehicle in a manner free of accidents and citations., • Performs other related duties as assigned. Experience & Qualifications: • High School Diploma or GED required. Certifications/licensing on specific fire protection systems preferred., • Strong troubleshooting skills with the ability to demonstrate knowledge of codes and regulations for the work being performed., • Strong communication and interpersonal skills with the ability to work in a team environment as well as work independently., • Must be flexible with scheduling requirements that could require working evenings and/or weekends., • Ability to prioritize tasks effectively and work in an efficient manner., • Ability to operate a mobile device/computer to complete work orders, inspections reports, emails, etc..., • Maintain a valid driver's license and ability to pass a drug and background check. Physical Requirements: • Regularly required to stand, walk, talk, hear and have full use of hands. The employee is occasionally required to sit, reach with hands and arms, climb or balance, and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • Ability to safely work from a ladder, and in some case, a man-lift., • Must be able to operate a motor vehicle and travel daily. We are an equal opportunity employer that welcomes and encourages diversity in the workplace. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.

Job Description About Millstone Weber (100% Employee-Owned): We are transportation infrastructure builders solving complex needs for the communities we work in for close to 100 years. We specialize in a broad range of construction markets including Highway/Bridge, Airfield/Federal, Rail/Mass Transit and Alternate Delivery including Design-Build. We focus heavily on self-performance with capabilities including heavy duty concrete paving, bridges, structural concrete, deep foundations, earthwork grading, storm drainage, and highway construction. We are ready to help solve any challenges. Job purpose The Operator is responsible for working with power construction equipment to move materials, earth, and heavy objects at construction sites. Clears and grades land to prepare it for asphalt, concrete, buildings, bridges, roads, runways, dams, levees, and power generation facilities. Duties and responsibilities • Use machines to dig up or smooth out earth., • Pick up heavy objects with machines., • Dig trenches., • Lay and repair sewer lines., • Spread asphalt and concrete., • Operate excavation and loading machines equipped with scoops, shovels, or buckets that dig sand, gravel, and earth., • Load materials onto trucks or onto conveyors., • Drive and control industrial trucks and utilize forklifts, booms, or hitches., • Operate and maintain air compressors, pumps, and other power equipment., • Smooth concrete for roadways., • Spray on curing compounds., • Perform maintenance and minor repairs on machinery., • Operate according to safety standards., • Take cues from an assistant on the ground., • Cut expansion joints., • Turn valves to regulate the temperature and flow of asphalt onto the roadbed., • Dig trenches., • Repair sewers and lay pipe. Qualifications • To perform this job successfully, an individual must be able to perform each Key Duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Safety support and planning work with Health and Safety Personnel., • Assist in plan & specification writing and interpretation., • Must have and maintain a valid driver's license., • Work is performed outdoors in all weather conditions., • Work environment periodically exposes the employees to high levels of noise, grease, and dust that is typically associated with a construction project., • Employee regularly works near heavy equipment and moving machinery. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Constant physical effort, including standing, is required during a regular work shift of at least eight hours per day. Employee must be able to stand for extended periods of time, and to stoop, bend, and crouch as required to perform Key Duties., • Work is often performed at heights up to 80 feet, requiring the employee to climb ladders, scaffolds and stair towers, often with narrow steps and passageways., • Frequently work with hands extended overhead, sometimes in conjunction with the operation of hand power tools., • Ability to lift and carry, on a frequent basis, at least 50 pounds personally, and up to 100 pounds with assistance., • Manual dexterity to hand-carry generators, lumber and other construction materials, forms, power tools, and hand tools., • Maintain constant alertness to the multiple concurrent activities of the construction site, including the activities of other employees and contractors, the operation of stationary equipment, and the movement of mobile equipment., • Frequently walk on uneven surfaces, including natural ground in varying weather conditions., • Capable of being certified to enter confined spaces, including climbing into and out of excavations, using ladders., • Sufficient skill and visual acuity, under varying degrees of light, darkness, and weather conditions, to provide direction and flagging for operators of cranes with rated capacities of up to 500 tons., • Capable of safely and productively operating a man-lift., • Ability to maintain balance while working on water craft or other surfaces Millstone Weber is an Equal Opportunity Employer and has long led the industry in training and hiring a diverse and inclusive workforce. To accomplish our goals of quality, innovation and continuous improvement, we are committed to partnering with employees and subcontractors who share our company values and seek to continually exceed the expectations of project owners. We strive to maintain a work environment that provides all employees with an opportunity to be successful without regard to race, creed, color, religion, sex, sexual orientation, gender identity, national origin, disabled Veterans and Vietnam Era Veterans, age, or physical/mental condition. As part of that policy, we adopt and support the Equal Opportunity Laws that are designed to promote the full realization of equal employment opportunity through a positive continuing program.

Job Description Dive into a career that matters at C&L Water Solutions, a partner of Insituform Technologies LLC, and a Azuria Water Solutions company. C&L is passionate about adding authentic, reliable, and dedicated creative minds to join our organization and support our mission to rebuild America's infrastructure. Our employees are not just fixing pipes - we are revitalizing communities together and shaping a better future for all. From Water Distribution and Sewer Collection to Fire Hydrant inspections and our innovative Trenchless Division, every role brings a unique value that allows us to make a difference in the world. Are you ready to make your mark and leave a positive, lasting impact on the environment? We are currently looking for an Experienced Water and Sewer Pipeline Utility Maintenance Foreman to join our team in Littleton, CO. Our foreman executes the details of each well-thought-out project. Our company depends on this team member to do what it takes to provide the best solutions for our customers. We are currently offering a limited-time sign-on bonus of $4,000 for new hires with a valid CDL license, and sign-on bonuses for new hires without a current CDL license are also available at a reduced amount. New employees who meet the criteria outlined in our sign-on bonus program will be eligible for the full payout. The starting pay is $35.00-$45.00 per hour depending on experience. Why You’ll Love Working For Us: • Competitive salary, • Daily per diem while traveling, • 100% covered individual hotel room stays while traveling, • Full benefits package including medical, dental, vision, and prescription drug coverage, • 401k matching, • Tuition assistance, • Paid time off and overtime pay, • On-the-job training with full pay, • Company paid PPE, boots, and safety gear, • Career growth opportunities, • Work for a forward-thinking and innovative company, • Valid driver's license required with a clean motor vehicle report, • Manage a 4-man Repair Crew, • Experience Operating Backhoe and Excavator, • Experience with excavating around existing Utilities, • Experience with Water Main Repairs, • Experience with Gate Valve Repairs and Replacement, • Experience with Fire Hydrant Repairs and Replacements, • Experience with Water Taps ¾” through 2”, • Experience with Sewer Point Repairs, • Have a CDL A or required to obtain an CDL A, • Ability to be on call for 1-week each month (on call compensation provided - required), • Interact with the customer and district & city representatives on a daily basis, • Maintaining a safe work environment and jobsite, • Maintain regular, consistent, and professional attendance, and punctuality., • Possess excellent communication skills, • Possess problem-solving skills, • Able to work well in stressful situations, • Be a self-motivated team player who can work well with others, • OSHA-10/Trench Safety Training, • First Aid/CPR certification, • Confined Space certification, • Emergency Repair Experience C&L Water Solutions, an Azuria Water Solutions Company, is an equal opportunity employer.. Equal opportunity is a sound and just concept to which Azuria Water Solutions is firmly bound. Azuria Water Solutions will not engage in discrimination against, or harassment of, any person employed or seeking employment with Azuria Water Solutions on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, non-disqualifying disability, status as a protected veteran or other characteristics protected by law. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. VEVRAA compliant – priority referral Protected Veterans requested.

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! This role is part of Blue Origin Operations, which is comprised of Integrated Supply Chain, Test Operations, Safety, Quality, and Mission Assurance. This includes Manufacturing and Supply Chain support across all Blue Origin facilities. As a Tooling Engineer at Blue Origin, you will be a critical link between our innovative satellite designs and their successful production. You will be responsible for designing, building, and implementing the full spectrum of tooling required to assemble, integrate, test, and transport our flight hardware with the utmost precision and safety. Your designs will be the physical foundation upon which our satellites are built. We are looking for a creative and hands on problem solver with a deep understanding of mechanical design and manufacturing processes. You will conceptualize and create everything from large scale assembly jigs and ergonomic lift fixtures to bespoke hand tools and environmental test adapters. This role requires a blend of mechanical design creativity and manufacturing pragmatism to enable a safe, high quality, and efficient production system. This is an unparalleled opportunity to shape the physical environment of a factory building the future of space communications. Responsibilities include but are not limited to: • Tooling Design & Analysis:Design and model tooling concepts in 3D CAD (e.g., Creo/Pro-E), performing structural analysis (FEA) to ensure robustness and safety. Create detailed 2D drawings with appropriate GD&T for fabrication., • Requirements Definition:Partner closely with manufacturing, industrial, and design engineers to capture tooling requirements, ensuring designs are optimized for operator safety, ergonomics, part quality, and manufacturing cycle time., • Fabrication Management:Manage the procurement and fabrication of tooling by working with both internal machine shops and external vendors. Create statements of work, track progress, and perform inspections to ensure tools are built to spec., • Implementation & Validation:Oversee the commissioning of tooling on the factory floor, which includes proof-loading of lift fixtures, validating tool functionality, and developing work instructions for proper use., • Design for Manufacturing (DFM):Serve as a key tooling and DFM resource during New Product Introduction (NPI), providing critical feedback to the design team to improve the manufacturability of the satellite product line., • Continuous Improvement:Provide ongoing support to the production floor, troubleshooting tooling issues and continuously improving existing tool designs to enhance performance, safety, and durability. Minimum Qualifications: • 8+ years of experiencein a tool design or mechanical design role, with a demonstrated history of leading complex tooling projects., • Expert-level proficiencyin 3D CAD and GD&T, with an ability to serve as a design reviewer and mentor for others., • Proven track record of architecting tooling solutions for a new product or production line, from initial concept to full rate production., • Deep expertise in structural analysis (FEA) and a strong understanding of various materials and fabrication processes., • Experience managing multiple vendors and large-scale procurement packages for tooling. Preferred Qualifications: • Extensive experience designing tooling for satellite/spacecraft assembly, integration, and test (AI&T)., • Deep experience with managing the design and certification of critical, man-rated, or fracture-critical lift equipment., • A track record of making significant improvements to ergonomics, safety, and cycle time through innovative tooling solutions. Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Stock Options for all regular employees (working at least 20 hours/week) * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request.

Job Description Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. Turner Industries has an opening for a Scheduler to join our team in the Denver, CO area. As a Scheduler, you will need relevant experience with scheduling activities for multiple disciplines or crafts. Experience in capital projects, turnarounds/ outages, or daily maintenance scheduling is required. The candidate may be asked to schedule Maintenance, Turnarounds, Small Capital Projects, or a combination of the three. Essential Qualifications: • Technical training and/or industrial related safety experience, • Post offer drug / alcohol screen, physical evaluation, and signed acceptance of the Turner Industries Drug, Alcohol and Contraband Policy, • Comply with company and client job site safety requirements, • Must not pose a direct threat to the health or safety of others in the workplace Functional Requirements: Review and incorporate historical data from purchase orders, subcontracts, productivity analysis reports, etc. into unit and man-hour figures; review proposal specifications, drawings, attend pre-bid meetings, etc. to determine scope of work and required contents of estimate; prepare estimates by calculating complete takeoff of scope of work; coordinate total estimating effort relevant to a particular bid/project as assigned; maintain files of working documents as back-up for estimates figures; interface with owner, A/E, and other contractors to provide engineering and cost data regarding project feasibility; follow awarded contracts as assigned - may include estimating extra work items, change orders, credits; procuring material, etc.; perform additional assignments per supervisor's direction Compensation Final agreed upon compensation is based upon individual qualifications and experience. Benefits Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program. Physical Involvement: May be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing; walking; pushing; bending; kneeling; crouching/squatting; seeing with or without correction; hearing with or without correction. Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. Keywords: scheduler, project controls, monitor Job Posted by ApplicantPro

Job Description Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking a Building Automation Systems (BAS) Specialist for our client in the HVAC Engineering Solutions domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Permanent position, and the client is looking for someone to start immediately. Duration: Full-time Location: Greenwood Village, Colorado Salary: $36.00–$45.00/Hourly (based on 5–20 years of experience) plus regular OT expected + Benefits Role: Building Automation Systems (BAS) Specialist Primary Skills: Engineering Role Description: The Building Automation Systems (BAS) Specialist must have 5+ years of experience. As the Controls Service Technician, you will support the Building Automation Systems (BAS) preventive maintenance agreements and respond to service and warranty calls for BAS-related projects. You will be reporting directly to the BAS Service Supervisor, this technician will utilize data from connected services to diagnose, maintain, and improve control systems and support the on-call rotation for automation services. Essential Duties & Responsibilities: • Program, commission, and troubleshoot various BAS platforms including pneumatic, electric, and electronic control systems., • Respond to service calls and perform preventive maintenance per dispatch and supervisor direction., • Calibrate electronic systems using tools such as multi-meters., • Support project teams by directing sub-contractors and performing limited project management on small jobs., • Implement energy conservation measures (ECMs) within BAS systems., • Complete commissioning documentation, time sheets, service orders, and expense reports accurately and on time., • Maintain productive daily schedules and ensure customer satisfaction., • Mentor and support junior technicians in service practices and professional development., • Communicate effectively with project teams, controls contractors, and clients., • Follow all company safety standards and maintain a professional appearance in company uniform., • Work at heights using ladders or man-lifts (up to 40 ft) as needed for installations or repairs. Required Qualifications: • Associate Degree in Electronics, Electrical, Mechanical, Computer, or Air Conditioning Technology OR • 3–5 years of equivalent experience in HVAC mechanical or control systems., • Minimum 5 years’ experience in control integration/programming related to service and maintenance., • Niagara N4, AX, & Advanced N4/AX certification required (additional certifications a plus)., • Experience with Niagara, JCI, Distech, or other major BAS platforms., • Strong PC skills., • Valid driver’s license with a clean driving record. Desired Competencies: • Analytical Thinking & Problem Solving: Gathers and analyzes data, develops solutions, and troubleshoots effectively., • Customer Service Orientation: Strong ability to satisfy customer needs and escalate issues appropriately., • Attention to Detail: Delivers high-quality, accurate work and identifies process improvements., • Communication Skills: Keeps all stakeholders informed; works well with cross-functional teams., • Dependability: Follows through on commitments and maintains consistent performance. Physical Requirements and Work Environment: • Must be able to lift up to 50 lbs, climb ladders, bend/stoop, and walk for extended periods., • Regular exposure to outdoor weather, confined spaces, and mechanical rooms., • Use of hand and power tools., • Exposure to potentially hazardous materials and chemicals in mechanical environments. Education: Associate Degree in Electronics, Electrical, Mechanical, Computer, or Air Conditioning Technology/Bachelor’s degree Experience: Minimum 5+ years of experience Relocation: This position will not cover relocation expenses Travel: No Local Preferred: Yes Note: Must be able to work on a W2 basis (No C2C) Recruiter Name: Bhaskar Gola Recruiter Phone: 412-249-1085 Benefits: This is a direct hire position, and the hired applicant will receive our client’s benefits package. Mastech Digital is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Description Career Strategies is looking for an Apartment Maintenance Supervisor for one of our clients in Aurora! This position is a Temp-To-Hire position! The MAINTENANCE SUPERVISOR must maintain a professional and courteous manner with residents, visitors, contractors and fellow employees. MAINTENANCE SUPERVISORS must have the necessary tools to effectively complete tasks. Must have the ability to follow oral and written instructions and be able to maintain effective and cooperative working relationships. Apartment Maintenance Supervisor Duties and Responsibilities • Makes sure all rules and regulations related to the execution of operational duties are adhered to, consulting the environmental manager as required by the relevant permit or certificate., • Review maintenance schedules every week., • Minimizes the frequency or severity of accidents of maintenance personnel and contractors by identifying risks., • Assigns and reviews work for maintenance workers., • Addresses concerns and issues with the maintenance coordinator., • Makes sure maintenance jobs are carried out according to the highest standards of efficiency., • Maintains schedule priority and compliance., • Ensures prompt repairs are done in times of emergency breakdowns., • Streamlines associated job execution and repair costs., • Reviews files that document equipment history., • Submits reports to the maintenance coordinator regarding repair jobs, which include consumption of man-hours, materials, tools, and skills., • Reports maintenance performance during major redevelopments., • Ensures that recorded histories in work order completions are accurate., • Offers grievance counseling when necessary., • Develops and executes a training plan for the maintenance staff., • Makes sure that maintenance work is performed in accordance with all government regulations and corporate policies., • Assigns and reassigns work as per priorities and emergencies., • Ensures quality-of-work, productivity, and housekeeping standards are maintained., • Helps promote good communication and inter-department relations between maintenance and production., • Helps achieves departmental and personal goals., • Investigates provides and implements corrective measures for all safety incidents, including near misses., • Strives to achieve almost 100% reliability on all jobs related to maintenance., • Is responsible for the reliability and maintenance of all equipment. Apartment Maintenance Supervisor Skill and Knowledge Requirements • 1 year of Maintenance Supervisor, or Service Manager experience, • Relevant technical knowledge., • CPO & EPA Certification with working knowledge, • Vendor relation and scheduling experience, • High level of safety awareness., • Advanced computer skills, • Fair housing law knowledge, • Good communication skills to effectively interact with different groups of people. Career Strategies is an Equal Opportunity Employer. Thorough background check required. • Accrued paid sick leave in accordance with Colorado’s Healthy Families and Workplaces Act (HFWA), • Medical health insurance available upon meeting eligibility requirements established under the Affordable Care Act, • Transportation subsidy of up to $5.00 per day available for public transit or ride share use Apply Today! We would love to hear from you! #ZrDen Most of our clients are looking to HIRE! We match our client’s needs with your skill set and get your foot in the door with a great assignment where you can showcase your talents. Your job is to win them over with your fantastic skills and make sure it’s a great match for you too! If it’s a match for everyone, then a job offer is extended and you’re hired by them! Not only can we launch you into this great new job, but once hired at the property you can anticipate an immediate bump up to your salary and additional perks may be available such as bonuses, commissions, and even DISCOUNTED RENT on apartments

Job Description Centerline is seeking an experienced Tower Technician to join our Denver, Colorado Team. Ideal candidate will start with our Lincloln, Nebraska team for 2 months and transition to our Denver expansion. The Tower Technician will be responsible for the performance of various construction tasks in the areas of tower erection, coaxial cable and antenna installation, antenna mount installation, RF testing and troubleshooting. This position is for candidates with experience in cellular construction. Technicians will be required to perform the majority of elevated construction activity and may be asked to supervise entry level techs at elevation. What You Will Do: • Installation and maintenance of mounts, platforms, antennas, RRU’s, TMA, and other related equipment on towers, rooftops, and other structures to expand and upgrade cellular networks., • Installation and maintenance of coaxial and DC power/fiber optic transmission lines., • Assist with testing of new and existing equipment. May include sweep, PIM, or fiber testing., • Installation of ice bridges, cable trays, equipment pads, racks, and platforms., • Installation of underground and in building conduits for electrical and back haul circuits., • Learn and incorporate climbing and work safety requirements., • Work as a team to function as part of a 3-4-man crew., • Other duties as required What You Will Need: • Minimum 1 year of experience in cellular construction, • Ability to work reliably under minimal supervision., • Valid and active driver's license that is insurable according to the standards of the company., • Excellent physical conditioning and stamina., • Willingness to work outdoors in all weather conditions; including but not limited to snow, rain and varying temperatures., • Ability to read, comprehend and carry out written and verbal instructions., • Observe all company procedures and safety rules., • While performing the duties of this job, the employee is frequently required to stand, use hands to finger/handle/feel, reach with hands and arms, climb or balance, talk or hear., • Occasionally the work requires the employee to walk, sit, stoop, kneel, crouch or crawl., • Frequently the employee is required to lift or carry up to 10 or 25 lbs., and occasionally up to 50 or 100 lbs., • Able to climb to and work at heights exceeding 300’. The employee needs to have good vision for close work, distance, color discrimination, peripheral, and depth perception., • Strong commitment to safety and training provided, • Permanent employment with competitive wages, • Steady, local career opportunities with a rapidly growing company, • Full benefits package and 401k matching (medical, dental, vision, life insurance, short term disability, etc.), • 120 hours paid time off, 10 paid holidays AAP/EEO Statement: Centerline is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Who We Are At Centerline, we design, build, and maintain industry-leading critical infrastructure across North America. Our technicians, engineers, and professional staff bring unmatched expertise to each job, working as a team to deliver consistent, exceptional results. That’s why Fortune 500 clients choose Centerline again and again for a wide range of projects. With demand for connectivity at an all-time high, Centerline’s opportunities for growth are limitless — and so are yours. We’re committed to fostering your professional advancement and supporting your career journey. We look for team members who demonstrate our core values: Safety, Teamwork, Accountability, and Reliability. Our values are key to our team’s success and driving everyone to reach their full potential. As a member of our winning team, you’ll receive comprehensive insurance benefits — medical, dental, and vision — plus a 401(k) plan, referral bonuses, and generous PTO. Join us today. Together, we’re building a better network. #IND1 #LI-PW1 #ZR

Job Description Summary Hiring an experienced Bike Technician. A passion for cycling, knowledge of bicycle mechanics and bicycle parts, and a proactive and problem solving attitude are qualities at the top of our list! In this job you will • Assemble and prepare bikes for sale., • Perform a variety of service functions on new and used bikes., • Dependable, • People-oriented, • Adaptable, • Detail-oriented, • Proactive, • Positive Duties Duties include but are not limited to: • Apply shop standards in the assembly and repair of bikes and skis across the full product line., • Evaluate the mechanical condition of the product and estimate the cost of repairs., • Provide an educated assessment for a bicycle repair for the customer that includes an estimated completion date., • Meet or exceed shop production standards., • Complete paperwork accurately and fully (record parts used work performed detail of torque tolerance and standard procedures; complete pricing of job ticket) and process to next status or location., • Record and report any deficiencies not addressed by the repair work being done to the customer and or the appropriate leader., • Assist customer in the sale or repair process by sharing product and technical knowledge as appropriate., • Operate cash register as necessary., • Report or record replacement parts inventory and supply shortages to the General Manager. Maintain shop cleanliness including bench and common workspace.Install and adjust speed and gear mechanisms., • Assemble new bicycles., • Install, repair, and replace equipment or accessories, such as handlebars, stands, lights, and seats., • Align wheels., • Disassemble axles to repair, adjust, and replace defective parts, using hand tools., • Shape replacement parts, using bench grinders., • Repair holes in tire tubes, using scrapers and patches., • Weld broken or cracked frames together, using oxyacetylene torches and welding rods., • Paint bicycle frames, using spray guns or brushes., • Install and adjust brakes and brake pads., • Help customers select bicycles that fit their body sizes and intended bicycle uses., • Sell bicycles and accessories., • Install new tires and tubes., • Clean and lubricate bicycle parts., • Order bicycle parts., • Build wheels by cutting and threading new spokes., • Install vehicle parts or accessories., • Adjust vehicle components according to specifications., • Explain technical product or service information to customers., • Sell products or services., • Install vehicle parts or accessories., • Perform basic equipment maintenance., • Order materials, supplies, or equipment., • Assemble mechanical components or machine parts., • Install vehicle parts or accessories., • Adjust vehicle components according to specifications., • Assemble mechanical components or machine parts., • Install vehicle parts or accessories., • Align equipment or machinery., • Disassemble equipment for maintenance or repair., • Grind parts to required dimensions., • Repair tires., • Operate welding equipment., • Paint surfaces or equipment., • Other duties as needed/ assigned. Requirements Requirements include but are not limited to: • Minimum 2 years experience preferred working as a technician/ mechanic in a bike shop., • Previous bike assembly experience or equivalent preferred, • Interest in working in a team environment committed to providing excellent sales and service experience while increasing sales through service, • Strong attention to detail, • Ability to maintain open and positive relations with employees and customers, • Interest in developing own skills and knowledge, • Availability to work a flexible schedule based on business needs, including evenings and weekends, • Ability to periodically lift 40 pounds Nice To Haves Preferred candidates will have knowledge and experience in any or all of the following systems and tools: • Adjustable hand wrenches, • Bench mount stands Wall mount stands, • Bike cable cutters, • Box end spanners, • Cable cutters, • Cable stretchers, • Cassette lock ring tools, • Chain checkers, • Chain cleaner brushes, • Chainring nut wrenches, • Compact scissors, • Component cleaning brushes, • Cone wrench sets, • Crank bolt wrenches, • Crank pullers, • Crown race setters, • Derailleur hanger alignment gauges, • Desktop computers, • Floor pumps, • Folding hex wrench sets, • Frame taps, • Handlebar holders, • Hex tools, • Inventory management software, • LightSpeed Cloud, • Linkage clamps, • Minipumps, • Multipurpose hammers, • Needle nose pliers, • Offset brake wrenches, • Open end wrench sets, • P-handled hex wrenches, • Pedal Powered Software Bicycle Repair Man, • Pedal wrenches, • Personal computers, • Phillips head screwdrivers, • Point of sale terminals, • Portable repair stands, • Precision spoke wrenches, • Repair Traq, • RepairTRAX, • Screw type chain tools, • Shop repair stands, • Side cutter pliers, • Spoke gauges, • Sprocket removers, • Straight blade screwdrivers, • Threadless nut setters, • Three-way hex wrenches, • Tire levers, • Wall mount stands, • Web browser software, • Wheel truing stands Benefits A competitive benefits package including store discount and flexible scheduling is available to all associates.

Job Description Demand for our products and services is growing, and we are looking for pool cover technicians to help us serve our customers. This candidate must be mechanically inclined and have a valid driver's license. It is a plus if they have previous knowledge in the installation, diagnostics, repair, and replacement of automatic pool cover systems but on-the-job training is provided. Our service technicians work Monday through Friday, performing installation, maintenance, and repair services on all brands of automatic swimming pool covers for pool owners and pool builders. Qualifications & Skills: • Possession of a valid driver’s license and good driving record, • Pool construction or automatic pool cover maintenance experience is a plus, • Ability to pass a drug screen and background check, • Hand & power tool knowledge, • Willingness to work in all weather conditions, • Must be 18 years of age or older, • Excellent verbal and written communication skillsCompany DescriptionThe Pool Man Inc is Very well stablished Pool company providing service in Denver Metro Area since 1976.The Pool Man Inc is Very well stablished Pool company providing service in Denver Metro Area since 1976.

Job Description The Pool Cleaning Technician is responsible for maintaining an assigned pool service route. Services include weekly cleaning, equipment maintenance, and minor equipment repairs. Maintains swimming pool water through routine maintenance of pool, equipment and water chemistry. Identifies and reports pool related issues to route manager. This a full-time, year round position. Qualifications • Able to lift 50lbs, • Must be at least 21 years of age, • Love being outside and don't mind working outside year-round, • Friendly, positive person and customer service oriented, • Able to routinely and predictably show up to work, • Mechanically Inclined, • Pool service experience preferred, but willing to teach the right candidate, • Teachable and excited to learn, • Comfortable around dogs, • Able to swim, • Own a smart phone for work related apps, • Competitive compensation, • Company truck and gas provided, • Overtime depending on volume, • Paid time off and paid holidays, • Monday to Friday License/Certification: • Driver's License (Required)Company DescriptionThe Pool Man Inc is Very well stablished Pool company providing service in Denver Metro Area since 1976.The Pool Man Inc is Very well stablished Pool company providing service in Denver Metro Area since 1976.

Aerotek - - Responsibilities: Perform daily site cleanup and debris removal; Sweep floors and operate a floor scrubber; Build, place, and maintain jobsite signage; Wash windows; operate a boom lift when needed; Assist with demolition and debris handling.

Industry: Warehousing & Distribution.Work Hours: Day Shift, Full Time.Job Perks: Benefits, Overtime Available.Centerline is your one access point to limitless opportunities.Our job is to connect you with safe, rewarding work at top companies while maintaining your flexibility and work/life balance.W

Aerotek - - Responsibilities: Digestor tank cleaning including wash-downs, debris removal, and confined-space support; Perform general labor tasks such as shoveling, sweeping, pressure washing, and material handling; Set up pumps, hoses, ventilation, and temporary equipment; Assist with maintenance

AdventHealth - - Responsibilities: Installs, inspects, maintains, repairs, and performs preventive maintenance on all heating, air conditioning, and ventilation systems; Maintains and applies current knowledge of steam distribution piping, valves, chilled and hot water reheat systems, and Pressure

The Electrical Maintenance Technician will have complete involvement in routine or emergency maintenance as well as corrective, preventive, predictive maintenance and care for all electrical and mechanical equipment and their related controls. Regular repair and maintenance are required in non-produ

Arby's - Flynn Group - - Responsibilities: Respond to service requests; troubleshoot, diagnose, and repair based on warranty and industry standards; Communicate with maintenance supervisor and store management to report repair status; Inspect and perform equipment repairs and replacements; Perform

Provides timely, quality maintenance for FedEx vehicle fleet and ground support equipment which requires preventative maintenance, troubleshooting, repairs, modifications, and documentation. Four (4) years fleet, automotive or truck vehicle advanced technical repair and maintenance experience. Must

Technicians must advance their knowledge and competency in vehicle maintenance through successfully completing training requirements to move up technician levels. If you're looking to join a railway family that truly cares about you and your success; want work with new technology, hone your maintena

You can work as much or as little as you like as an On-Demand Team Member (TM) and your schedule may vary depending on shift availability and store needs. As an On-Demand TM, you will not be included on the posted weekly schedule, but rather will have the opportunity to create your own schedule by p

Cashier/ Sales Associate - Part-time.We are seeking outgoing, friendly, and helpful team members to welcome and assist customers.Previous hardware experience is a plus but not a requirement as we provide extensive training.At {{brand_name}}, we're independently owned and operated so helping our comm

Work in a safe manner at all times; comply with all safety policies, best practices, and training; report hazards and correct where possible. You thrive in a fast-moving, highly active and physically demanding role, where teamwork, flexibility, and creative problem solving are key to success.

At Smashburger, we don't just make burgerswe create crave-worthy moments that keep guests coming back for more.We're driven by a shared commitment to excellence, working as one team and taking bold action to deliver unforgettable experiences.Here, you'll be part of a group that works hard and genuin

The Associate I, Retail Sales Cashier, is responsible for providing exceptional customer service by greeting customers in a welcoming manner and responding timely and professionally to customer inquiries. Must be able to effectively communicate with customers, managers, supervisors, staff, and peers

Cashier! Are you a people person with an outgoing and friendly demeanor? Can you think on your feet in a fast-paced and demanding environment? Do you enjoy the satisfaction of positively impacting someone's day? If so, this may be the right role for you!. Perform other tasks as assigned by manager f

California applicants: Please review the Costco Applicant Privacy Notice.The jobs listed are examples of the typical kinds of positions that Costco may hire for when openings exist.The listing does not mean that any positions are currently open or available at Costco.Position Summary: Processes memb

Work in a safe manner at all times; comply with all safety policies, best practices, and training; report hazards and correct where possible. You thrive in a fast-moving, highly active, and physically demanding role, where teamwork, flexibility, and creative problem solving are key to success.

Career advancement opportunities promotion from Cashier to Assistant Manager can be done in as quickly as 6 months.

Practice preventive maintenance by properly inspecting equipment and notify appropriate department or store manager of any items in need of repair. Ability to manage conflict in a reasonable, nonconfrontational and cooperative manner. Reinforce safety programs by complying with safety procedures and

You thrive in a fast-moving, highly active and physically demanding role, where teamwork, flexibility, and creative problem solving are key to success. Retail business fundamentals including: department sales trends, pricing and promotion strategies, inventory management, and process efficiency & im

Stop in for an in-person interview from 2-4:30 PM daily! Ask for the manager. We have various level positions available: line cook, prep cook, dishwasher, cashier, and assistant management positions are also available!/ppServing up fresh opportunities!/pulliFun, fast-paced work environment/lili3 rai

The Food and Beverage Cashier/Snack Bar Associate is responsible for ensuring that each guest has an amazing experience by greeting them in a warm and friendly manner, accurately processing their transaction, in the POS system, quickly and efficiently and thanking them with a smile. You must embrace

Over 60% of our managers were promoted from within!. At CEC Entertainment, we believe that our workforce should reflect the diverse backgrounds, experiences, and perspectives of many guests we serve.

Our menu is Mediterranean-inspired with a Southern flair, and our mission is to create an environment that combines modern Mediterranean fare with meaningful human connection. Our menu is Mediterranean-inspired with a Southern flair, and our mission is to create an environment that combines modern M

Must be able to communicate clearly with managers, other personnel, and visitors. This job opportunity is with one of our many franchisees.

Work in a safe manner at all times; comply with all safety policies, best practices, and training; report hazards and correct where possible. You thrive in a fast-moving, highly active, and physically demanding role, where teamwork, flexibility, and creative problem solving are key to success.

Career advancement opportunities - promotion from Cashier to Assistant Manager can be done in as quickly as 6 months.

Work in a safe manner at all times; comply with all safety policies, best practices, and training; report hazards and correct where possible. You thrive in a fast-moving, highly active, and physically demanding role, where teamwork, flexibility, and creative problem solving are key to success.

OTG Concessions Management, LLC and its subsidiaries and affiliates are proud to be an equal-opportunity workplace and employer.

Cashiers will support our management staff with miscellaneous tasks like stocking, visual displays, special orders, and all basic house-keeping needs. Cashiers are also responsible for keeping the store neat and clean, and must always answer the phone with an enthusiastic response and professional m

Work collaboratively with managers, the kitchen, and the rest of the Hospitality Team to ensure problems are resolved and guests receive smooth and efficient service that keeps them coming back.