Manual testing jobs in Clifton, New JerseyCreate job alerts

PURPOSE AND SCOPE: Functions as the hemodialysis team leader in the provision of chronic hemodialysis care and treatment. Provides day to day direction and supervision to assigned direct patient care staff. Communicates with the physician and other members of the healthcare team to interpret, adjust, and complete patient care plans. Provides safe, effective delivery of patient care in compliance with standards outlined in the facility procedure manual, as well as regulations set forth by the company, state, and federal agencies. Supports FMCNA's mission, vision, core values and customer service philosophy. Adheres to the FMCNA Compliance Program, including following all regulatory and FMS policy requirements. PRINCIPAL DUTIES AND RESPONSIBILITIES: General and Staff Related: Provide day to day guidance, support and direction to direct patient care staff, providing informal feedback on an ongoing basis and formal feedback input for the annual performance evaluation. Participate in the department staffing and the appropriate hiring, firing and disciplinary actions. Recommend disciplinary action to Clinical Manager and initiate as appropriate. Ensure compliance with all company and facility approved procedures and policies as well as regulations set forth by state and federal agencies in clinics with more than 100 patients. Approve or disapprove time or personnel schedule changes in the absence on the Clinical Manager ensuring compliance with applicable regulations, policies and procedures for documenting time of work hours for staff members on assigned shift. Participate in patient care plan meetings. Maintain knowledge in the current practices related to the principles and techniques of dialysis by participating in all scheduled in-services. Train and orient staff as necessary. Routinely observe and guide direct patient care staff for appropriate technique and adherence to facility policies and procedures. Promote and assist with compliance to OSHA programs in order to maintain a safe and clean working environment. Maintain overall shift operation in a safe, efficient, and effective matter. With Clinical Manager conduct staff meetings at least monthly or as needed to keep patient care staff informed of changes in patient care needs or operations to improve delivery of care. Meet routinely with the Clinical Manager to discuss personnel and patient care status, issues, and information. Supervise all documentation of patient information. Coordinate Charge Nurse duties with Staff RNs acting in the relief charge capacity. Patient Care: Assess daily patient care needs and develop and distribute patient care assignments appropriately. Assume primary responsibility in an emergency situation. Assess patient needs, respond to dialysis treatments, and communicate concerns to rounding physician. Implement changes in patient care/treatment as directed. Monitor and supervise all patient care activity during dialysis and assist as necessary. Collaborate with direct patient care team in making decisions to benefit patient care. Continuously monitor patient's condition with regards to problems and potential complications associated with dialysis. Administer medications to patients per physician's orders. Act as the subject matter expert and as a resource for staff members. Supervise and participate in completion of short- and long-term care plans. Admit new patients according to facility procedure. Ensure educational needs of patients are met and educate the patient and family about End Stage Renal Disease, dialysis therapy, diet and medication. Technical: Supervise the safe and effective use of all equipment involved in direct patient care. Operate all dialysis related and emergency equipment safely and efficiently when needed. Perform required testing and verification and initial the checklist for start-up and shut-down procedures as outlined in the Technical Services Manual. Complete Nurse's Technical Training Program/Water Quality Facility Training. Other: Assist with special projects or other duties as assigned by the Clinical Manager Assist with the interviewing of potential direct patient care staff as requested. Promote efficient use of medical supplies. Attend and participate in monthly Quality Assurance meetings. Other duties as assigned. Relationships: Internal Contacts: Direct Patient Care Staff, Facility support staff, management teams (Clinical Manager, Area Manager, RVP) External Contacts: Physicians, Back-up Hospitals Additional responsibilities may include focus on one or more departments or locations. See applicable addendum for department or location specific functions. The duties listed in this job description are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. PHYSICAL DEMANDS AND WORKING CONDITIONS: The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Employees are required to take the Ishihara's Color Blindness test as a condition of employment. Note that: Failing the Ishihara Test for Color Blindness does not preclude employment. The Company will consider whether reasonable accommodations can be made. Day to day work includes desk and personal computer work and interaction with patients, facility staff and physicians. The position requires travel between assigned facilities and various locations within the community. Travel to regional, Business Unit and Corporate meetings may be required. The work environment is characteristic of a health care facility with air temperature control and moderate noise levels. May be exposed to infectious and contagious diseases/materials. SUPERVISION: Direct Patient Care Staff, Ward Clerk as assigned. EDUCATION: Graduate of an accredited school of Nursing (R.N.) Current appropriate state licensure. EXPERIENCE AND REQUIRED SKILLS: Minimum of 9 months of nursing experience and an additional 3 months of clinical experience in dialysis RN charge nurses assuming responsibility for nursing and patient servicesin the absence of the Clinical Managermust have one-yearclinical experience and six months dialysis experience. Supervisory or management experience preferred. Successfully completea training course in the theory and practice of hemodialysis. Good communication skills - verbal and written. Must meet appropriate state requirements (if any). The rate of pay for this position will depend on the successful candidate’s work location and qualifications, including relevant education, work experience, skills, and competencies. Annual Rate: $90,000.00 - $151,000.00 Non-Bonus Eligible Positions: include language below. Benefit Overview: This position offers a comprehensive benefits package including medical, dental, and vision insurance, a 401(k) with company match, paid time off, parental leave. Bonus Eligible Positions – include language below. Benefit Overview: This position offers a comprehensive benefits package including medical, dental, and vision insurance, a 401(k) with company match, paid time off, parental leave and potential for performance-based bonuses depending on company and individual performance. Fresenius Medical Care maintains a drug-free workplace in accordance with applicable federal and state laws. EOE, disability/veterans

Posting Type Remote/Hybrid Job Overview As an Advanced Security Engineer focused on Endpoint Security, you will design, build, and operate security controls that protect Relativity's employee endpoints and the enterprise systems they access. You will help establish hardened, standardized, and measurable endpoint security foundations that reduce risk while preserving productivity, partnering closely with IT and Security teams to deliver securebydefault device experiences. This role blends handson software engineering with systemlevel security ownership in a modern cloud environment. Job Description and Requirements Role Responsibilities * Design, implement, andoperateendpoint security controls across laptops and mobile devices * Build automation and tooling to enforce secure configuration baselines and reduce manual effort * Partner with IT on device management, deployment, and lifecycle security * Reduce enterprise risk by hardening devices, limiting standing privilege, and improving visibility * Participate in incident response and endpointrelated investigations in partnership with Cyber teams * Continuously improve endpoint security posture using metrics, telemetry, and risk insights Minimum qualifications: * Bachelor's in Computer Science, Information Security, or equivalent experience. * 2+ years of commercial experience in software developmentand scripting(C#, Python,Javaor other general-purpose modern programming language) with a solid understanding of computer science fundamentals, including algorithms and data structures * Experience securing andoperatingmanaged endpoints at scale * Familiarity with modern device management and endpoint protection concepts * Ability to translate security policy into automated, enforceable controls * Comfort working across teams to deliver secure outcomes without friction * Experience with cloud technologies(preferably Azure),DevSecOpspractices, and automation tools (e.g., GitHub Actions). * Growth mindset and eagerness to learn across engineering and securitydomains. * Ability to take feedback and strive for continual improvement. Preferred qualifications: * Experience securing cloud-native applications / SaaS solutions and networks. * Familiarity with vulnerability scanning and threat protection. * Relevant certifications: * Microsoft Certified: Azure Security Engineer Associate (AZ-500). * Microsoft Certified: Identity and Access Administrator Associate (SC-300). * Knowledge of Zero Trustprinciplesand compliance standards (e.g., GDPR, HIPAA). * Exposure to other cloud platforms(AWS, GCP). Relativity is committed to competitive, fair, and equitable compensation practices. This position is eligible for total compensation which includes a competitive base salary, an annual performance bonus, and long-term incentives. The expected salary range for this role is between following values: $104,000 and $156,000 The final offered salary will be based on several factors, including but not limited to the candidate's depth of experience, skill set, qualifications, and internal pay equity. Hiring at the top end of the range would not be typical, to allow for future meaningful salary growth in this position. Required Skills: Endpoint Security, Network Security, Penetration Testing, Security Architecture Design, Security Automation, Security Information, Security Information and Event Management (SIEM), Security Operations, Threat Modeling, Vulnerability Management

Posting Type Hybrid Job Overview AtRelativity, we make software to help users organize data, discover the truth, and act on it. Our e-discovery platform is used by more than 13,000 organizations around the world to manage large volumes of data and quickly identify key issues during litigation, internal investigations, and compliance projects. The Product Management team is looking for a Product Manager whose collaborative nature and strong communication skills complement experience with identifying and driving organization-level outcomes through platform products. As a Product Manager, you will craft and shape the strategy for internal developer experience tied to our cloud transformation for the entire organization. You will also work with a team of Product Managers to align roadmaps and overall strategy to ensure a complete and cohesive solution for our Developer Experience. A successful candidate must be energized by building deep, data-driven customer empathy, collaborating with Design and Engineering, discovering opportunities through data analysis, and creating and communicating progress through clear leading indicators. As a Product Manager in Engineering Systems, you will oversee key aspects of the internal and external developer experience, including: Transforming our internal developer experience, leveraging the power of AI to change how developers get information, design systems, and develop code. Re-thinking and transforming how teams release and experiment with their latest ideas & innovations via advanced feature management capabilities and experimentation techniques Serving as the tip-of-the-spear for cloud transformation to create faster, automated, and turnkey pathways for internal teams to increase their efficiency and automate away toil About Product Management within Engineering Systems: Our Engineering Systems Product Management team focuses on three key principles - delivering tangible value to customers iteratively and frequently, having a bias to action, and leading collaboratively. We believe that innovation comes from research and expertise being paired with data-driven experimentation and iterative development. If you have working experience in building great platform capabilities, scaling adoption for game-changing innovation, and love delivering real value to users through frequent iterations, you'll be right at home in Engineering Systems! Job Description and Requirements Role Responsibilities * Craft and shape the product strategyand portfoliopertaining toacompany-widecloud transformation. * Clearly communicateyourproduct visionroadmaptointernal/external stakeholders, seniorleaders,and customers with varying levels of technical acumen. * Lead with a data-driven approachwith the voice of the customer,utilizingbothqualitative and quantitative data fromuser,customer,market,competitiveinsightand data to articulate clear,long-term product vision,identifynew strategic opportunities,and gain organizational buy-in. * Manage effectively viaObjectives and Key Results alongsidemeasurableleading indicatorsof product health and project success; drive tactics based on insights from portfolio metrics and reporting. * Discover and understand internal engineeringcustomerneedstoidentifyapproaches to superpower their productivity in critical build, test, deployment, and release workflows. * Leadcollaborativelyand evangelize best practicesrelated to feature management,experimentation,releases,clouddevelopment,and testing practiceswhile building consensus and influence. * Own the operationof their portfolio.Createandreviseroadmaps based on real-time signals.Facilitateandworkwith teams to scope and prioritize issues andtickets anddeliver great outcomes to customers. Preferredqualifications * Understandingofhowdevelopers canleverageAItoachieve higher value, quality, and speed. * Ability to find and reduce organizational bottlenecks by working with engineering teams to automate manual processes. * A team player with proven ability tovalidatesolutions and deliver features frominceptionto delivery * Strong tactical execution with the ability to handle multiple projects simultaneously * Championing, creating, and delivering value via incentive-based adoption strategies for features and platform capabilities * You focus on the details, but focus your strategy on the big picture objectives * Excellentcommunication and presentation skills Minimum qualifications * 3+ years of experience in product management * Solid understanding of software developmentlifecycleand agilepractices * Experience and resultswithdelivering value to internal customers * Demonstrated practical experience and application of AI tools for PM practices * Familiarity and comfort with data,includingabilityto use data to analyze andmonitorproduct health, set goals, back up assumptions, and track success. * You are excited and curious abouthighly complexproblems, systems, and interactions Relativity is committed to competitive, fair, and equitable compensation practices. This position is eligible for total compensation which includes a competitive base salary, an annual performance bonus, and long-term incentives. The expected salary range for this role is between following values: $115,000 and $173,000 The final offered salary will be based on several factors, including but not limited to the candidate's depth of experience, skill set, qualifications, and internal pay equity. Hiring at the top end of the range would not be typical, to allow for future meaningful salary growth in this position. Required Skills: Agile Methodology, Cross-Functional Teamwork, Market Research, Market Strategy, Product Lifecycle, Product Lifecycle Management (PLM), Product Management, Product Strategies, Stakeholder Management, Team Leadership

Be part of an amazing story Macy's is more than just a store. We're a story. One that's captured the hearts and minds of America for more than 160 years. A story about innovations and traditions...about inspiring stores and irresistible products...about the excitement of the Macy's 4th of July Fireworks, and the wonder of the Thanksgiving Day Parade. We've been part of memorable moments and milestones for countless customers and colleagues. Those stories are part of what makes this such a special place to work. Job Overview Responsible for the protection of company assets and associates. Perform other duties as assigned. Full-time colleagues are typically scheduled to work 30 or more hours per week, while part-time colleagues are typically scheduled 12-24 hours per week. Hours are dependent on business needs and colleague availability. Information regarding hours per week needed for benefit eligibility purposes can be found ___ What We Can Offer You Join a team where work is as rewarding as it is fun! We offer a dynamic, inclusive environment with competitive pay and benefits. Enjoy comprehensive health and wellness coverage and a 401(k) match to invest in your future. Prioritize your well-being with paid time off and eight paid holidays. Grow your career with continuous learning and leadership development. Plus, build community by joining one of our Colleague Resource Groups and make a difference through our volunteer opportunities. Some additional benefits we offer include: • Merchandise discounts, • Performance-based incentives, • Annual merit review What You Will Do • Completion of inbound/outbound trailer logs, common carrier logs, discrepancy reports., • Maintain access control of all who enter and exit the facility., • Respond to the alarm system., • Conduct audits on common carriers., • Monitor associate activities., • Monitor activities of visitors/truckers., • Enforce all facility rules and regulations., • Respond to building emergencies., • Operate power equipment and CCTV., • Regular, dependable attendance and punctuality., • Prior security experience in a distribution center environment preferred., • PC Knowledge, specifically Microsoft Outlook, Word and Excel., • Ability to read and interpret instructional documents such as safety rules, operating and maintenance instructions, and procedural manual., • Resourceful self-starter, works well independently as well as part of a team., • Must be proficient in the use of computers and handheld technology., • Position requires prolonged periods of standing/walking around store or department., • May involve reaching, crouching, kneeling, stooping, climbing ladders, depth perception and color vision., • Frequent use of computers and other technology necessary to perform job duties, including handheld electronic equipment. Random drug testing for all colleagues will be conducted on a monthly or semi-monthly basis, depending upon factors including but not limited to the size of the facility and the number of colleagues on roll. Colleagues will be randomly selected for testing by a third party. Testing must be completed on the same workday the colleague is informed of selection for testing, absent extenuating circumstances. In all circumstances, testing must be completed within 24 hours of notification. About Us This is a great time to join Macy's! Whether you're helping a customer find the perfect gift, streamlining operations in one of our distribution centers, enhancing our online shopping experience, buying in-style and on-trend merchandise to outfit our customers, or designing a balloon for the Thanksgiving Day Parade, we offer unique opportunities to be part of some of the most memorable moments in people's lives. Join us and help write the next chapter in our story - Apply Today! This job description is not all-inclusive and may not apply to colleagues covered by a collective bargaining agreement. Macy's Inc. reserves the right to amend this job description at any time. Macy's Inc. is an Equal Opportunity Employer, committed to a diverse and inclusive work environment. SUPPLY00

Marmon - - Responsibilities: Assemble and install electrical components, wiring, and harnesses according to engineering drawings, and specifications; Using manual & powered tools to perform delicate tasks such as stripping, crimping, soldering, and connector assembly; Conduct testing such as electr

BAYADA Home Health Care is seeking a Home Health Physical Therapist for a job in Livingston, New Jersey. Job Description & Requirements • Specialty: Physical Therapist, • Discipline: Therapy, • Duration: Ongoing, • Employment Type: Staff BAYADA Home Health Care is currently seeking an experienced Physical Therapist, PT, for an opportunity performing home health visits for adult and geriatric clients in territories throughout the Essex County area. Full Time opportunity available! One year prior clinical experience as a licensed Physical Therapist is required. As a home care Physical Therapist, you will be an integral member of a multi-disciplinary health care team that provides rehabilitative care and skilled nursing to clients, affording them the opportunity to receive the medical care required to remain at home. At BAYADA, we believe our employees are our greatest asset. We are committed to investing in people and nurturing their desire to grow. Responsibilities for a PT - Physical Therapist include: • Make home visits to clients in designated geographic territories., • Perform diagnostic tests and measurements, such as the mobility/range of joints, transfer status, stability, patterns and appearance of ambulation, strength and endurance of muscles, balance testing, and safety assessments., • Implement integumentary protective interventions to prevent wound formation and promote wound repair utilizing evidence-based dressings and topical agents., • Develop and implement appropriate individualized care plans, including manual therapeutic exercises, gait training, balance, and other interventions., • Continually assess and revise the Physical Therapy - PT care plan, and participate with nursing in the multidisciplinary care plan, as appropriate., • Educate and instruct clients, family members, or other client representatives, in rehabilitative care and activities necessary to promote the client's health, safety, and independent living., • A current New Jersey Physical Therapist - PT license., • A minimum of one year of recent work experience as a Physical Therapist - PT., • Graduation from a program approved by the American Physical Therapy Association or the Committee on Allied Health Education and Accreditation of the American Medical Association, as indicated by school transcript or diploma., • Ability to work independently and manage time effectively., • Strong interpersonal, organizational, and problem solving skills., • To learn more about BAYADA Benefits, click here, • Enjoy being part of a team that cares and a company that believes in leading with our values., • Feel confident, safe, and supported with PPE supplies, comprehensive infection prevention protocol, daily pre-screens, and close monitoring of the COVID-19 outbreak., • Develop your skills with training and scholarship opportunities., • Advance your career with specially designed career tracks., • Be recognized and rewarded for your compassion, excellence, and reliability. As an accredited, regulated, certified, and licensed home health care provider, BAYADA complies with all state/local mandates. BAYADA is celebrating 50 years of compassion, excellence, and reliability. Learn more about our 50th anniversary celebration and how you can join in here. BAYADA Home Health Care, Inc., and its associated entities and joint venture partners, are Equal Opportunity Employers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, age, disability, pregnancy or maternity, sexual orientation, gender identity, citizenship status, military status, or any other similarly protected status in accordance with federal, state and local laws. Hence, we strongly encourage applications from people with these identities or who are members of other marginalized communities. Bayada Job ID #8444532002. Posted job title: physical therapist- home health About BAYADA Home Health Care Ever wonder why the team at Bayada "LOVE what we do"? It's a restful nights of sleep knowing you had the time and resources to give quality 1:1 care to your client. It's the importance BAYADA places on family and work-life balance. Every home environment and client are unique, whether they're an infant, geriatric, or somewhere in between. BAYADA ensures every team member has an opportunity to advance in their career. Our extensive paid training and state-of-the-art simulation labs will leave you feeling comfortable and confident before your first visit with your favorite new client. We offer opportunities to learn a new specialty or further develop your area of expertise. Get back to doing what you love, as the clinician you always wanted to be. Benefits • 401k retirement plan, • Discount program, • Sick pay, • Employee assistance programs, • Vision benefits, • Bereavement, • Health Care FSA, • Weekly pay, • Continuing Education, • Holiday Pay, • Wellness and fitness programs, • Dental benefits, • Medical benefits, • Dependent Care FSA

Performs scheduled Quality Assurance testing activities required by State, Federal and Local regulatory agencies. These testing activities are to be performed as outlined in the Radiation Physicist Quality Assurance Manual.

Job DescriptionSalary: $55 per hour About Jetvia Jetvia is redefining luxury air travel through world-class charter services, fractional ownership, and forward-thinking aviation solutions. With a growing fleet of Learjets and Vision Jets, we're committed to delivering safe, efficient, and exceptional experiencesfor our clients and our team. As we scale, were expanding our maintenance team to support high-reliability operations across the country. Position Overview The Mobile Support Aircraft Technician will perform a variety of aircraft modifications and maintenance functions on aircraft. Duties include advanced troubleshooting, removal and installations of airframe components, landing gear, engine components, electrical components, control systems and any other maintenance requirements required to return aircraft to service. Responsibilities Your Key Responsibilities (Essential Functions) • Must be able to communicate effectively with scheduling, flight crews, Technical Support, vendors, and leadership., • Perform maintenance and servicing of all aircraft mechanical and avionics systems., • Must demonstrate the ability to work independently to perform assigned maintenance and avionics tasks., • Responsible to coordinate/order, receive and inspect all tooling and materials needed to service the aircraft, prior to use/installation., • Responsible for inspecting the MSU truck, tools for calibration/operation, stocking levels and hazmat., • Arranges the shipment of all core units and tooling back to the proper location., • Properly completes work order signoffs, logbook entries, shift turnovers, expense reports and all other paperwork in a timely manner., • Ensures that all work accomplished meets quality standards, maintenance manual and company policies., • Establishes and maintains a professional working relationship and promotes the Jetvia brand positively when interacting with others., • Properly identifies (tags) parts and equipment. Stores aircraft components and other property securely and safely., • Operates and supervises use of special support equipment used in removal and installations of major components., • Coordinates with Line Service and FBO ops to schedule movement of aircraft and assist with movement of aircraft., • Provides regular updates on aircraft status and all support activity to Maintenance Control and leadership, as needed., • Reliable, self-motivated, and able to deal with stressful situations and timelines while maintaining a professional attitude., • Responsible for maintaining company training requirements. Qualifications: • Valid FAA Airframe and Powerplant license required., • Valid Drivers License required, • 4+ years combined experience in inspection, maintenance or servicing of corporate type aircraft, • AOG/Mobile experience preferred, • 2+ years Lear 60 aircraft experience, • Advanced knowledge of inspection and maintenance procedures for the noted aircraft model and systems., • Excellent communication skillsespecially in high-pressure situations, • Strong organizational and multi-tasking ability, • Availability for flexible scheduling and on-call rotation, • Proficient in Microsoft Word, Excel, and PowerPoint Benefits: • Competitive pay, • 401(k), • Meaningful Employee Equity Options, • Dental insurance, • Health insurance, • Vision insurance ATI Jet, Inc. is an equal opportunity employer and reviews applicants without regard to race, color, religion, sex, age, national origin, handicapped, or veteran's status. Employment with ATI Jet Inc. is contingent upon pre-employment drug testing, background checks and post-offer, job-related physicals (when applicable). Employment will be conditioned upon a negative result of this test. If the applicant tests positive for illegal drugs, the offer of employment will be withdrawn.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is seeking highly skilled and motivated technicians to join our rapidly growing team. The Engineering Technician will be at the forefront of bringing our innovative designs to life. You will be responsible for hands-on fabrication, assembly, and testing of critical hardware including superconducting magnets, high vacuum and cryogenic equipment, electromechanical systems, and other associated hardware. You will be expected to work with a high degree of autonomy, troubleshoot complex problems, and contribute to the continuous improvement of our processes. If you are passionate about building cutting-edge technology and thrive in a fast-paced environment, we want to hear from you. Key Responsibility Areas: • Build, operate, maintain, and troubleshoot complex mechanical and electrical systems, • Assist in developing new equipment, tools, procedures, and inspection techniques to reduce production time while maintaining high quality, • Responsible for tool and workspace organization and maintenance, • Assemble and troubleshoot test articles and supporting test equipment, • Collaborate to support development of manufacturing processes and tooling Required Experience & Skillsets:, • High-school diploma or equivalent, • 5+ years of experience in shop fabrication, manufacturing, research, or high-tech industry, • 5+ years of technical experience with any of the following:mechanical or electrical systems, high pressure or high vacuum systems, cryogenic systems, plumbing, soldering, system testing, power or controls systems, • Comfortable working to aggressive deadlines and exceptional work ethic, • Proficiency with Microsoft Office suite tools or similar software Ideal Experience:, • Knowledge of quality control and inspection procedures, • Experience operating, maintaining, or troubleshooting or programming automation equipment, e.g. PLC, HMI, or process controllers, • Experience with reflow solder processes, including PCBA manufacturing, • Crane or lifting experience, • Forklift experience, • Experience with electrical schematic and wiring, • Experience using various types of hand tools and precision measuring tools, • Experience in documenting, improving, and implementing process instructions, • Experience with reading and reviewing mechanical drawings, • Experience with machining, operating manual milling, saws, and other toolsCompany Benefits:, • Hourly rate $30-43/hr, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description Job Description: * Follow the laboratory's procedures for specimen handling and processing, test analyses, reporting and maintaining records of patient test result; * Maintain records that demonstrate that proficiency testing samples are tested in the same manner as patient specimens; * Analyze specimens using approved testing procedures (see department SOPs). * Review and release test results. * Follow CLIA, HIPAA, OSHA, and safety guidelines as described in their respective guidelines. * Adhere to the laboratory's quality control policies, document all quality control activities, instrument and procedural calibrations and all maintenance performed; * Follow the laboratory's established policies and procedures whenever test systems are not within the laboratory's established acceptable levels of performance. * Identify problems that may adversely affect test performance or reporting of test results, correct the problems encountered or immediately notify the senior technologist or supervisor. * Document all corrective actions taken when test systems deviate from the laboratory's established performance specifications. * Follow department's procedure in reporting STATS or Critical results to clients. * If applicable, answer questions from customers or other lab personnel. * Maintain complete records of all testing performed on-site. * Maintain general appearance of the department. * Make sure reagents/test kits have received dates, expiration dates, and if applicable opened dates. * Review/train on new procedures. * Attend monthly department and any additional training/educational meetings. * Participate in all applicable safety training sessions. * Know the location and contents of the safety manual. * Know the location/use of all applicable safety equipment. * If needed, participate in government or regulatory agency inspections. * Perform other duties as directed by supervisor. Qualifications: * BS in Medical Technology preferred; or BS/BA in Chemistry or Biology, or Associates degree in a Laboratory Science or Medical Technology, or Previously qualified as a Technologist under 42 CFR 493. 1433 published in March 14, 1990. * Foreign educated candidates must provide a detailed credential evaluation from IERF (International Education Research Foundation). * United States educated candidates must provide a detailed original transcript. * A successful candidate should possess or be eligible for national certification as an MT / MLT from a recognized organization (ASCP or AMT). * A solid understanding of basic laboratory testing is required for this position. * The successful candidate must possess good computer skills and be able to adapt to working in multiple computer systems. * Must have knowledge of QC and QA as well as knowledge of all areas of the laboratory. * 1 year Clinical experience (high complexity testing) preferred. * Minimum of 1 year of clinical laboratory experience in highly complex testing for those with BS/BA in Chemistry or Biology. * National and State licensure as required. * Must have the ability to establish work priorities and handle several procedures simultaneously. * Must interact with other departments. * Contact with clients may be required, good customer service skills are important. * Must protect patient confidentiality at all times. * Shift/Time Zone: Sun-thurs 3pm-11:30pm Benefits: Healthcare Insurance: Synectics offers eligible employees and their dependents healthcare coverage through BlueCross BlueShield of Illinois. Eligibility begins on the 1st day of the calendar month following 60 days of continuous full time employment with Synectics. Premiums are subsidized by Synectics. Dental Insurance: Synectics offers eligible employees and their dependents a dental plan through MetLife. Eligibility begins on the 1st day of the calendar month following 60 days of continuous full time employment with Synectics. Vision Insurance: Synectics offers eligible employees vision insurance through VSP. Eligibility begins on the 1st day of the calendar month following 60 days of continuous full time employment with Synectics.401(k) Plan: The Synectics Inc. Investment Savings Retirement Plan. Synectics offers all employees who are 21 years of age or older the opportunity to invest in the 401(k) Plan on the first enrollment date that is at least 30 days after employment begins. Enrollment dates are each January 1st, April 1st, July 1st, and October 1st. Technical Certification Bonus: Synectics is pleased to award its employees a bonus of up to $500 for an approved professional certification. In determining the bonus amount, Synectics will consider the cost of the test(s) for any certification relating to your current position, achieved during your employment with us. Only one Certification Bonus per calendar year may be awarded per employee. Only current, active employees will be eligible to receive this bonus. It will be awarded 90 days after the Synectics office has received documentation confirming the successful completion of the certification. Synectics is an equal opportunity employer. Company DescriptionSynectics is a leading staffing and workforce solutions company dedicated to connecting exceptional talent with top organizations. We specialize in IT, engineering, finance, healthcare, and professional services recruitment, offering both contract and permanent staffing solutions. With a people-first approach, we focus on understanding the unique needs of our clients and candidates to create long-term, successful matches. Our mission is to empower businesses with the right talent while helping professionals achieve rewarding career opportunitiesSynectics is a leading staffing and workforce solutions company dedicated to connecting exceptional talent with top organizations. We specialize in IT, engineering, finance, healthcare, and professional services recruitment, offering both contract and permanent staffing solutions. With a people-first approach, we focus on understanding the unique needs of our clients and candidates to create long-term, successful matches. Our mission is to empower businesses with the right talent while helping professionals achieve rewarding career opportunities

Job Description Home Health (Visits) Weekend Admissions Physical Therapist Per Diem Great Flexibility and Work/Life Balance!! BAYADA Home Health has an exciting opportunity for a Per Diem Weekend Admissions Physical Therapist!! You will complete OASIS Starts of Care (SOCs) for adult and geriatric patients in Essex County. Home Health and OASIS experience is required for this position. As a home care Physical Therapist, you will be an integral member of a multi-disciplinary health care team that provides rehabilitative care and skilled nursing to clients, affording them the opportunity to receive the medical care required to remain at home. Responsibilities: • Make home visits to clients in designated geographic territories and conduct Start of Care (Admissions) visits., • Perform diagnostic tests and measurements, such as the mobility/range of joints, transfer status, stability, patterns and appearance of ambulation, strength and endurance of muscles, balance testing, and safety assessments., • Develop and implement appropriate individualized care plans, including manual therapeutic exercises, gait training, balance, and other interventions., • Continually assess and revise the Physical Therapy - PT care plan, and participate with nursing in the multidisciplinary care plan, as appropriate., • Educate and instruct clients, family members, or other client representatives, in rehabilitative care and activities necessary to promote the client's health, safety, and independent living., • A current New Jersey Physical Therapist License., • A minimum of one year of recent work experience as a Physical Therapist, • BAYADA offers a comprehensive benefits plan that includes the following: Paid holidays, vacation and sick leave, vision, dental and medical health plans, employer paid life insurance, 401k with company match, direct deposit and employee assistance program, • To learn more about BAYADA Benefits, click here, • Enjoy being part of a team that cares and a company that believes in leading with our values., • Develop your skills with training and scholarship opportunities., • Advance your career with specially designed career tracks., • Be recognized and rewarded for your compassion, excellence, and reliability. As an accredited, regulated, certified, and licensed home health care provider, BAYADA complies with all state/local mandates. BAYADA is celebrating 50 years of compassion, excellence, and reliability. Learn more about our 50th anniversary celebration and how you can join in here. BAYADA Home Health Care, Inc., and its associated entities and joint venture partners, are Equal Opportunity Employers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, age, disability, pregnancy or maternity, sexual orientation, gender identity, citizenship status, military status, or any other similarly protected status in accordance with federal, state and local laws. Hence, we strongly encourage applications from people with these identities or who are members of other marginalized communities.

Job DescriptionDescription: Job Title: AOG A&P Technician (Level 2/3) Reports to: AOG Maintenance Manager Classification: Hourly Position Location: TEB, NYC Metro, Philadelphia, Boston Status: Full Time Company Description: Alliance Aviation Group, LLC is a private aviation company, specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and MRO. The company has three different brands including Fly Alliance, which is a FAA Part 135 charter certificate operator, focusing on high quality service to customers in the areas of aircraft sales, management, charter, maintenance, parts, and consulting. Fly Alliance Maintenance which is a Part 145 maintenance company based in Orlando, Florida focusing on high quality service to customers in aircraft maintenance. Finally, Fly Alliance Parts which is an aircraft parts sales company based in Ocoee, Florida focusing on aircraft parts, specifically, engine sales and leases, aircraft parts and rotable sales. Role Objective: This position serves as an Aircraft-On-Ground (AOG) A&P Technician for Fly Alliance Maintenance (FAM). AOG personnel are responsible for all aspects of maintaining the aircraft in accordance with the applicable General Maintenance Manual (GMM) and all applicable FARs. This includes maintenance, inspection & repair of the company’s aircraft, special tools, and ground support equipment; work order preparation, review, and completion. Safety will be the primary consideration while ensuring compliance with all State and Federal regulations, company policies, and requirements of 14 CFR Part 135 and all other applicable FARs that apply to the certificate holder. The AOG position requires a flexible schedule, rapid response ability and most importantly positive attitude. At times the position may require last minute travel and ability to do maintenance in Central Florida and surrounding areas. Essential Job Tasks: · Answer incoming maintenance calls when on duty or on call. · Properly assist flight crews in troubleshooting, write-ups and MEL procedures · Work with other technicians and vendors to ensure safe action plans are put in place. · Inspect, maintain, and repair aircraft in accordance with aircraft manufactures manuals and FAR’s when applicable; coordinate and document all such actions including communications with managers and leads. · Complete work orders and account for parts and billable time. · Attend required training on airframe, engines, and equipment as needed. · Ensure the cleanliness of work areas and follow Fly Alliance Maintenance strict standards of process, safety and quality concern. · Ensure that the hangar, workshops, and other areas are maintained in a safe and orderly manner. · Assist Line Department personnel with ground handling and servicing of aircraft as needed. · Develop and maintain a cohesive and cooperative teamwork environment with flight crews, department managers, technicians, and other company employees · Maintain knowledge of flight schedules on a daily basis and ensure production schedules meet delivery dates. · Keep hangar, ramp, aircraft and vehicles secure at all times Knowledge, Skills and Abilities: · Knowledge of Gulfstream G-IV, Challenger 604, Hawker 800/900XP, Citation XLS and Falcon 2000 maintenance preferred. · Knowledge of aviation procedures/servicing/maintenance · Adept in workplace safety best practices · Understanding of applicable FARs · Knowledge of computers and electronic software applications · Must possess excellent communication and interpersonal skills including the ability to read, write and speak English. (Bi-lingual in Spanish is a plus). Minimum Qualifications: · High school diploma or possession of a G.E.D. certificate. · Current US Airframe and Powerplant mechanics certificate meeting the requirements of, but not limited to, FAR Part 65.83. · Prior FAR Part 135.411(a)(2) aircraft maintenance experience. · Possession of an adequate set of aircraft mechanic's hand tools. · Current driver’s license. · Ability to pass DOT background check. · Must be able to work as a part of a team in a high-stress, fast-paced environment. · Must be a self-starter, able to work with little to no guidance. · Must be a highly motivated, detail-oriented, organized, with the ability to multi-task. · Must be computer proficient (MS Office, Aviation Maintenance Software (Corridor). Work Conditions & Physical Requirements: · FAR Part 135 aircraft maintenance in a hangar and ramp environment. · The employee must occasionally lift and/or move up to 50 pounds. · Good vision and depth perception. · Availability during nights, weekends, & holidays as needed. · Company tools and maintenance vans provided for AOG use Travel: · Travel required while on duty Required Education/Experience: · Three (3) years proven experience in a similar position. · A&P Certification · High School diploma or GED. · Has no certificate action since the date of the interview. "Offer of employment is contingent upon successfully completing DOT background check screening and drug testing required by federal regulation for this role." Direct Reports: · This role has no direct reports. Work Authorization: · Must be authorized to work in the U.S. and be at least 21 years of age by date of hire. Compensation/Benefits: · Pay based on experience · Medical including Health, Dental and Vision · Short-Term and Long-Term Disability Insurance · Paid Holidays · Paid Vacation · 401K – After 6 Months of Service · Rotating 4/3 schedule weekly · Per Diem while traveling for AOG services · Additional compensation for sales lead generation · Overtime available on an as needed basis by the company Incentive program for marketing and selling additional services to AOG customers Requirements:

Job DescriptionMaintains and fuels all para-transit vehicles in conjunction with para-transit operations center. Performs light maintenance as necessary to buildings and grounds. • Job DescriptionMajor Responsibilities, • Opens the gates to the lot and checks para-transit parking areas to ensure all can be dispatched in a timely manner. Re-positions any vehicles that may impede the traffic in the yard., • Opens the fuel island, takes accurate stick and meter readings, and turns in inventory sheets at the end of the day., • Maintains accurate records and completes Bulk Fuel Receiving Report, Fuel Variance Report, Closing Month-end Report and Meter Calibration Report., • Notifies the Manager or designee when a fuel delivery is required and ensures that accurate stick readings are taken before and after delivery. In addition, ensures that proper procedure is followed during delivery., • Checks and fills the oil, antifreeze, power steering, transmission fluid, brake fluid, windshield washer fluid and belts on vehicles being fueled. Ensures that adequate supplies to perform checks are maintained at the fuel island. Communicates with the shop foreman regarding supplies and oil inventory dispensed into equipment., • Twice a week, checks tires for damage and proper air pressure. Tire damage must be reported to the shop immediately., • Inspects all vehicles during fueling or on a regularly scheduled basis for physical damage. Any damage will be reported immediately to the Manager or designee., • Maintains the required inventory in the spill barrel and notifies the Manager any time supplies are used or replaced., • In the event of a fuel spill, takes all necessary steps to contain the spill. The Manager or designee must be notified immediately., • Maintains adequate inventories and supplies to make minor repairs and facilitate the washing of vehicles., • Cleans interiors and exteriors of vehicles as required to maintain cleanliness of the fleet., • Performs maintenance of buildings and grounds to include yard cleanliness, grass and weeds or any other yard projects that are assigned as necessary., • Performs any other management requests or directives as requested. Minimum Education or Certifications Required • High school diploma or equivalent Minimum Experience or Skills Required • Ability to effectively prioritize tasks and manage time effectively., • Ability to appropriately interact with employees of all levels including drivers, customers, senior management, client representatives, union officials, and public., • Work extended hours regularly, including weekends and holidays to meet the business needs., • Demonstrate regular and consistent attendance and punctuality. Physical Requirements and Working Conditions • The position requires the employee to work outdoors in varying, seasonal weather conditions., • Must be able to drive company or personal vehicle to review driver performance, meet clients, and for other company related purposes., • Must be able to:, • Use full range of hearing, speech, and vision, • Use fingers (manual dexterity) handling paperwork, • Stoop, crouch, squat, or kneel when performing inspections of any type, • Bend at knee, hip, waist when performing duties, • Stand while performing inspections, • Be subject to wet, cold, or hot environmental conditions First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Job Description About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: Responsible for driving new business and growing key accounts across the assigned territory through strategic prospecting, relationship building, and technical solution selling. Develop and execute sales plans, interpret plans and specifications to build accurate estimates, and partner with internal engineering and operations teams to deliver BAS/BMS solutions that meet customer needs. Responsibilities: • Develop and execute a strategic sales plan to achieve sales targets and expand the customer base., • Conduct regular visits to clients and prospects to build relationships and understand their needs., • Interpret plans and specifications and develop estimates, • Present and demonstrate products and services to potential clients, highlighting their benefits and value., • Collaborate with internal teams to ensure timely delivery of products and services to clients., • Maintain accurate records of sales activities, customer interactions, and market feedback in the CRM system., • Identify new business opportunities and develop sales strategies, • Other duties as assigned. Required Qualifications: • Bachelor's degree in Mechanical Engineering, a related field or equivalent industry experience, • 2+ years of experience in outside sales in the building automation industry., • Strong understanding of sales principles and customer relationship management., • Ability to interpret plans & specifications and estimate projects., • Excellent communication and interpersonal skills., • An established network in the construction and facility management fields in the NY / NJ or Northeast area, • Experienced in working independently and managing time effectively., • Proven track record of strategic sales and sales territory management, • Valid driver's license and willingness to travel within the assigned territory. Preferred Qualifications: • 5+ years of experience with Building Automation Systems (BAS) or related technologies., • Familiarity with CRM software and sales analytics tools., • Demonstrated ability to close sales and meet or exceed targets., • Network of contacts within the construction industry., • Experience with Tridium Niagara-based control systems Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. • Must be able to effectively communicate in English, (ie see, hear, speak and write clearly) in order to communicate with colleagues and/or customers, • Manual dexterity required for occasional reaching, lifting of light office objects, and operating office equipment, • Sitting, standing, walking in office environments and construction sites, • The employee must occasionally lift and/or move up to 50 pounds and may be required to work at heights over 1.8m (6 feet) Working Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • The office is clean, orderly, properly lighted and ventilated. Noise levels are considered low to moderate, • Will be required to be on site with customers or contractors, with or without BBT colleagues to manage the expectations and deliverables. Sites range from general office environments to new construction., • Driving to customer sites is required, • Limited overnight travel may be required Additional Information: • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program, • Pet Insurance Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: The Outside Sales Associate supports business development efforts by engaging new and existing customers, estimating projects, interpreting bid documents, and preparing proposals for building automation and mechanical solutions. This role builds relationships within the territory, collaborates closely with sales leadership, and develops technical and sales expertise through hands-on training and field experience. Responsibilities: • Interface with new and existing clients, • Define project requirements, estimate projects, build relationships, gather leads from established business partners, set appointments and recommend optimal Bosch Building solutions, • Interpret bid drawings and requirements, estimate project costs and write proposals, • .Work both independently and cooperatively within your designated area to close sales, secure business, and meet sales targets, • Develop skills required to understand sales strategy focused on decision-makers and business owners to establish a network and gain new business and expand relationships, • Collaborate daily with manager and team counterparts, • Participate in ongoing training, development, and mentoring, • Other duties as assigned. Required Qualifications: • Understanding of HVAC / controls / mechanical systems., • A positive Self-Starter attitude, • Good communication and people skills, • An ability to overcome obstacles and find solutions, • A commitment to ongoing learning to build upon past methods is essential Preferred Qualifications: • While an engineering degree is not essential, understanding of mechanical and/or BMS systems is preferred, and/or military experience, • 1-2 years of previous work experience or internships in Retail, Marketing, Business Development, Engineering, Technical Sales, or comparable fields are also preferred Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. • Must be able to effectively communicate in English, (ie see, hear, speak and write clearly) in order to communicate with colleagues and/or customers, • Manual dexterity required for occasional reaching, lifting of light office objects, and operating office equipment, • Sitting, standing, walking in office environments and construction sites, • The employee must occasionally lift and/or move up to 50 pounds and may be required to work at heights over 1.8m (6 feet) Working Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • The office is clean, orderly, properly lighted and ventilated. Noise levels are considered low to moderate, • Will be required to be on site with customers or contractors, with or without BBT colleagues to manage the expectations and deliverables. Sites range from general office environments to new construction., • Driving to customer sites is required, • Limited overnight travel may be required Additional Information: • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program, • Pet Insurance Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description Do you want to work in a fun, energetic environment that practices patient-centered care and values work-life balance? Forest Hill Physical Therapy (FHPT) is your place. We are seeking a Physical Therapist to join our growing business! Through our innovative care pathway, we have integrated medical and fitness models to optimize patient care. As a physical therapist at Forest Hill physical therapy, you will have the opportunity to practice and grow professionally in a judgement-free environment without individual financial productivity requirements and no double-booking patient scheduling. Position Benefits • Protective Documentation time, • New graduates are encouraged, • On-Sight Continuing Education, • Career Advancement Opportunities, • Must hold an active NJ state license to practice physical therapy, • Conducts a physical therapy evaluation/examination and devises a physical therapy plan of care based on the subjective, objective, special testing and functional findings., • Provides, coordinates, and the administration of physical modalities, therapeutic interventions, manual care, assistant device training, gait training and therapeutic functional activities utilized in physical therapy as indicated by the established plan of care., • Accurately documents physical therapy care perform during initial evaluation, treatment notes, progress reports, discharge reports and any additional reports as required by other referring physicians and other agencies according to company policies and quality procedures., • Provides quality-value care to every patient with compassion, empathy and collaboration., • Coordinates plan of care and treatment plan among other physical therapists, physical therapist’s assistant, and accessory staff, • Charges effectively and appropriately for all services rendered., • Part takes in clinical instruction. Company DescriptionTo learn more about us visit our website learn more about us visit our website

Job Description $10,000 Sign on Bonus! Home Health (Visits) Admissions Physical Therapist Full-Time - Comprehensive Benefits Package!! Great Flexibility and Work/Life Balance!! BAYADA Home Health has an exciting opportunity for a Full-Time Admissions Physical Therapist!! You will complete OASIS Starts of Care (SOCs) for adult and geriatric patients in Essex County. Home Health and OASIS experience is required for this position. As a home care Physical Therapist, you will be an integral member of a multi-disciplinary health care team that provides rehabilitative care and skilled nursing to clients, affording them the opportunity to receive the medical care required to remain at home. Responsibilities: • Make home visits to clients in designated geographic territories and conduct Start of Care (Admissions) visits., • Perform diagnostic tests and measurements, such as the mobility/range of joints, transfer status, stability, patterns and appearance of ambulation, strength and endurance of muscles, balance testing, and safety assessments., • Develop and implement appropriate individualized care plans, including manual therapeutic exercises, gait training, balance, and other interventions., • Continually assess and revise the Physical Therapy - PT care plan, and participate with nursing in the multidisciplinary care plan, as appropriate., • Educate and instruct clients, family members, or other client representatives, in rehabilitative care and activities necessary to promote the client's health, safety, and independent living., • A current New Jersey Physical Therapist License., • A minimum of one year of recent work experience as a Physical Therapist, • BAYADA offers a comprehensive benefits plan that includes the following: Paid holidays, vacation and sick leave, vision, dental and medical health plans, employer paid life insurance, 401k with company match, direct deposit and employee assistance program, • To learn more about BAYADA Benefits, click here, • Enjoy being part of a team that cares and a company that believes in leading with our values., • Develop your skills with training and scholarship opportunities., • Advance your career with specially designed career tracks., • Be recognized and rewarded for your compassion, excellence, and reliability. $10,000 Sign on Bonus for Full Time Admissions PT's As an accredited, regulated, certified, and licensed home health care provider, BAYADA complies with all state/local mandates. BAYADA is celebrating 50 years of compassion, excellence, and reliability. Learn more about our 50th anniversary celebration and how you can join in here. BAYADA Home Health Care, Inc., and its associated entities and joint venture partners, are Equal Opportunity Employers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, age, disability, pregnancy or maternity, sexual orientation, gender identity, citizenship status, military status, or any other similarly protected status in accordance with federal, state and local laws. Hence, we strongly encourage applications from people with these identities or who are members of other marginalized communities.

Job DescriptionJob Title: Medical Laboratory Scientist Duration: 4 months Location: Clifton NJ Shift: 5 pm to 1.30am Additional Job Details: BLOOD BANK EXPERIENCE PREFERRED. State of Credentials Licenses Required: Preferred It's an evening shift (5pm to 1.30am) position, but currently we don't have any evening shifts, so we need to train this person either in the morning or nights. JOB RESPONSIBILITIES: 1. Follow the laboratory's procedures for specimen handling and processing, test analyses, reporting and maintaining records of patient test result;, 2. Maintain records that demonstrate that proficiency testing samples are tested in the same manner as patient specimens;, 3. Analyze specimens using approved testing procedures (see department SOPs)., 4. Review and release test results., 5. Follow CLIA, HIPAA, OSHA, and safety guidelines as described in their respective guidelines., 6. Adhere to the laboratory's quality control policies, document all quality control activities, instrument and procedural calibrations and all maintenance performed;, 7. Follow the laboratory's established policies and procedures whenever test systems are not within the laboratory's established acceptable levels of performance., 8. Identify problems that may adversely affect test performance or reporting of test results, correct the problems encountered or immediately notify the senior technologist or supervisor., 9. Document all corrective actions taken when test systems deviate from the laboratory's established performance specifications., 10. Follow department's procedure in reporting STATS or Critical results to clients., 11. If applicable, answer questions from customers or other lab personnel., 12. Maintain complete records of all testing performed on-site., 13. Maintain general appearance of the department., 14. Make sure reagents/test kits have received dates, expiration dates, and if applicable opened dates. 15. Review/train on new procedures., 15. Attend monthly department and any additional training/educational meetings., 16. Participate in all applicable safety training sessions. Know the location and contents of the safety manual. Know the location/use of all applicable safety equipment., 17. If needed, participate in government or regulatory agency inspections., 18. Perform other duties as directed by supervisor. Required Knowledge: A solid understanding of basic laboratory testing is required for this position. The successful candidate must possess good computer skills and be able to adapt to working in multiple computer systems. Must have knowledge of QC and QA as well as knowledge of all areas of the laboratory. Education: BS in Medical Technology preferred; or BS/BA in Chemistry or Biology, or Associates degree in a Laboratory Science or Medical Technology, or Previously qualified as a Technologist under 42 CFR 493. 1433 published in March 14, 1990. Foreign educated candidates must provide a detailed credential evaluation from IERF (International Education Research Foundation). United States educated candidates must provide a detailed original transcript. A successful candidate should possess or be eligible for national certification as an MT / MLT from a recognized organization (ASCP or AMT). Work Experience: 1 year Clinical experience (high complexity testing) preferred. Minimum of 1 year of clinical laboratory experience in highly complex testing for those with BS/BA in Chemistry or Biology. National and State licensure as required. Special Requirements: Must have the ability to establish work priorities and handle several procedures simultaneously. Must interact with other departments. Contact with clients may be required, good customer service skills are important. Must protect patient confidentiality at all times. #PB07 #TB_HC #ZR Why TalentBurst? At TalentBurst, we deliver more than talent, we deliver outcomes. We partner with you to move quickly and connect you to opportunities aligned with your skills and long term growth. Backed by precision, transparency, and results, we connect top talent with leading organizations through trusted partnerships. We offer competitive compensation and comprehensive benefits, including medical, dental, vision, and retirement options. TalentBurst is an equal opportunity employer committed to an inclusive and diverse workforce. Company DescriptionFounded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CAFounded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CA

Job Description BAYADA Home Health Care is currently seeking an experienced Physical Therapist, PT, for an opportunity performing home health visits for adult and geriatric clients in territories throughout the Essex County area. Full Time opportunity available! One year prior clinical experience as a licensed Physical Therapist is required. As a home care Physical Therapist, you will be an integral member of a multi-disciplinary health care team that provides rehabilitative care and skilled nursing to clients, affording them the opportunity to receive the medical care required to remain at home. At BAYADA, we believe our employees are our greatest asset. We are committed to investing in people and nurturing their desire to grow. Responsibilities for a PT - Physical Therapist include: • Make home visits to clients in designated geographic territories., • Perform diagnostic tests and measurements, such as the mobility/range of joints, transfer status, stability, patterns and appearance of ambulation, strength and endurance of muscles, balance testing, and safety assessments., • Implement integumentary protective interventions to prevent wound formation and promote wound repair utilizing evidence-based dressings and topical agents., • Develop and implement appropriate individualized care plans, including manual therapeutic exercises, gait training, balance, and other interventions., • Continually assess and revise the Physical Therapy - PT care plan, and participate with nursing in the multidisciplinary care plan, as appropriate., • Educate and instruct clients, family members, or other client representatives, in rehabilitative care and activities necessary to promote the client's health, safety, and independent living., • Accurately document observations, interventions, and evaluations pertaining to client care management and services provided, utilizing a state-of-the-art touch pad tablet. Qualifications for a PT - Physical Therapist include: • A current New Jersey Physical Therapist - PT license., • A minimum of one year of recent work experience as a Physical Therapist - PT., • Graduation from a program approved by the American Physical Therapy Association or the Committee on Allied Health Education and Accreditation of the American Medical Association, as indicated by school transcript or diploma., • Ability to work independently and manage time effectively., • Strong interpersonal, organizational, and problem solving skills., • To learn more about BAYADA Benefits, click here, • Enjoy being part of a team that cares and a company that believes in leading with our values., • Feel confident, safe, and supported with PPE supplies, comprehensive infection prevention protocol, daily pre-screens, and close monitoring of the COVID-19 outbreak., • Develop your skills with training and scholarship opportunities., • Advance your career with specially designed career tracks., • Be recognized and rewarded for your compassion, excellence, and reliability. As an accredited, regulated, certified, and licensed home health care provider, BAYADA complies with all state/local mandates. BAYADA is celebrating 50 years of compassion, excellence, and reliability. Learn more about our 50th anniversary celebration and how you can join in here. BAYADA Home Health Care, Inc., and its associated entities and joint venture partners, are Equal Opportunity Employers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, age, disability, pregnancy or maternity, sexual orientation, gender identity, citizenship status, military status, or any other similarly protected status in accordance with federal, state and local laws. Hence, we strongly encourage applications from people with these identities or who are members of other marginalized communities.

Job DescriptionTitle: Medical Laboratory Scientist Location: Clifton, NJ Duration: 3 months Shift/Time Zone: T- Sat, 7 am - 3:30pm JOB RESPONSIBILITIES: 1. Follow the laboratory's procedures for specimen handling and processing, test analyses, reporting and maintaining records of patient test result;, 2. Maintain records that demonstrate that proficiency testing samples are tested in the same manner as patient specimens;, 3. Analyze specimens using approved testing procedures (see department SOPs)., 4. Review and release test results., 5. Follow CLIA, HIPAA, OSHA, and safety guidelines as described in their respective guidelines., 6. Adhere to the laboratory's quality control policies, document all quality control activities, instrument and procedural calibrations and all maintenance performed;, 7. Follow the laboratory's established policies and procedures whenever test systems are not within the laboratory's established acceptable levels of performance., 8. Identify problems that may adversely affect test performance or reporting of test results, correct the problems encountered or immediately notify the senior technologist or supervisor., 9. Document all corrective actions taken when test systems deviate from the laboratory's established performance specifications., 10. Follow department's procedure in reporting STATS or Critical results to clients., 11. If applicable, answer questions from customers or other lab personnel., 12. Maintain complete records of all testing performed on-site., 13. Maintain general appearance of the department., 14. Make sure reagents/test kits have received dates, expiration dates, and if applicable opened dates. 15. Review/train on new procedures., 15. Attend monthly department and any additional training/educational meetings., 16. Participate in all applicable safety training sessions. Know the location and contents of the safety manual. Know the location/use of all applicable safety equipment., 17. If needed, participate in government or regulatory agency inspections. Education: BS in Medical Technology preferred; or BS/BA in Chemistry or Biology, or Associates degree in a Laboratory Science or Medical Technology, or Previously qualified as a Technologist under 42 CFR 493. 1433 published in March 14, 1990. Foreign educated candidates must provide a detailed credential evaluation from IERF (International Education Research Foundation). United States educated candidates must provide a detailed original transcript. A successful candidate should possess or be eligible for national certification as an MT / MLT from a recognized organization (ASCP or AMT). Work Experience: 1 year Clinical experience (high complexity testing) preferred. Minimum of 1 year of clinical laboratory experience in highly complex testing for those with BS/BA in Chemistry or Biology. National and State licensure as required. Special Requirements: 1. Must have the ability to establish work priorities and handle several procedures simultaneously., 2. Must interact with other departments., 3. Contact with clients may be required, good customer service skills are important., 4. Must protect patient confidentiality at all times. #TB_HC #ZR Why TalentBurst? At TalentBurst, we deliver more than talent, we deliver outcomes. We partner with you to move quickly and connect you to opportunities aligned with your skills and long term growth. Backed by precision, transparency, and results, we connect top talent with leading organizations through trusted partnerships. We offer competitive compensation and comprehensive benefits, including medical, dental, vision, and retirement options. TalentBurst is an equal opportunity employer committed to an inclusive and diverse workforce. Company DescriptionFounded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CAFounded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CA

Job Description Job Duties: Performs and interprets automated and manual testing procedures on blood, urine and fluid specimens in the laboratory. Evaluates specimen/test orders for acceptance/rejection according to guidelines; accessions specimens accurately. Meets established TAT and productivity standards. Recognizes and resolves errors/discrepancies or problems and notifies appropriate personnel. Is proficient with all IT systems; can order, cancel, retrieve result, review work lists, sample collections, and test status. Addresses critical results and delivers STAT results properly according to policy. Correlates results with diagnosis and compares previous results if necessary. Can operate all Laboratory testing instruments; can recognize, troubleshoot and resolve instrument issues. Ensures proper function, maintenance and QC of each instrument; ensures compliance with QC, maintenance, temperature and reagent records. Performs proficiency testing and quality audits as needed. Ensures compliance with JCAHO, FDA, CAP, AABB and NJDOH. Maintain the record of reagents and supply; reports reagents shortage to the supervisor or designee; ensures that all reagents used for testing are in date and show no signs of drift or contamination as indicated in the daily QC data. Assists with training new employees, participates in teaching students. Demonstrates knowledge and follows to all department safety procedures and policies. Ensures proper handling of chemical and bio-hazard materials. Works weekdays, weekends and holidays as scheduled. Conducts personal business on non-productive time, limits socializing to ensure the work flow continues uninterrupted. Shows leadership quality; assumes responsibility in absence of supervisor. Attends department meetings and participates in continue education. EDUCATION + EXPERIENCE REQUIREMENTS: BS degree from an accredited institution with a major in medical technology. Minimum of 1 year clinical laboratory experience, which may be concurrent or subsequent to education, required. MT (ASCP) or equivalent certification desired. May be required to meet specific state requirements. CREDENTIALS + QUALIFICATIONS: Degrees from foreign institutions will require credential equivalency evaluation. Ability to provide excellent customer service internally and externally. Possess superior written and verbal communication skills. Ability to read, understand and follow detailed procedures. Analytical, numerical and reasoning abilities necessary. Proven skills of critical thinking, problem solving, and decision making. Ability to prioritize, organize, and handle a high volume workload efficiently essential. Good close vision and color perception required.

Job Description Join Our Team at Bergen New Bridge Medical Center!** We are dedicated to providing high-quality, compassionate care to our diverse community. As a leading healthcare provider, we offer a supportive and inclusive work environment. If you’re passionate about making a difference and thrive in a collaborative setting, Bergen New Bridge Medical Center is looking for a Registered Respiratory Therapist. Job Duties Performs respiratory therapy procedures as per scope of service and NJ Board of Respiratory Therapy, either independently according to protocols or under physician orders, such as but not limited to: Administration of oxygen, aerosol and medicated aerosol therapy. Initiation, monitoring and maintenance of mechanical ventilation. Blood-Gas drawing (with certification) and Acid-Base analyses. Suctioning of patient airway, trach and mouth care, bronchial hygiene. CPR. Delivers, sets-up, monitors and changes medical gases as required. Intubation (with certification). Tracheostomy care. Assessment, treatment and patient care responsibilities are delivered with a knowledge of patient growth and development and are appropriate to the ages of the patients served. Performs cardiopulmonary evaluations and assessments and diagnostic procedures including but not limited to breath sounds, weaning parameters, point of function testing, ABG (arterial blood gases), discharge planning and possible home care needs. Assessments will include evaluation of treatment and/or procedure outcomes as compared to physician goals and appropriate follow-up action. Positions patients as required (e.g., by physician's orders, patient's condition, or therapy being administered). Responsible for the assembly, sequential operation, and calibration of equipment and accessories to implement associated therapeutic regimens including, but not limited to, teaching inpatients and outpatients incentive spirometry as appropriate; instructs patients and family before discharge on pulmonary rehabilitation procedures (e.g., deep breathing, use of equipment at home, suctioning procedures). Attends and participates in Medical Rounds and teaching conferences. Documents patient outcomes and maintains other required documentation in patient chart and department records according to departmental policies and procedures. Maintains open lines of communication with other disciplines to facilitate resolution of problems and patient care issues in a timely manner. Acts as resource or consultant to physicians, nurses, patients and families and to other Respiratory Care practitioners and the public to provide appropriate, tactful support and education when requested and required; provides clinical supervision of care given by Technicians as well as supporting higher-credentialed personnel. Performs infection control procedures (i.e. changing resuscitator bags, aerosol set-ups and recycling same as required); processes equipment on an as-needed basis. Reports problems or unusual circumstances to appropriate member of health care team. Customer Service: respect, flexibility, knowledge, confidence, professionalism, pleasant attitude, patience and helpfulness. All responses should be timely, professional, caring, and respectful in accordance with Customer Service Performance expectations Maintains established departmental policies and procedures, objectives, quality assurance program, safety, environmental, and infection control standards. Assesses gaps in policies and procedures, and create necessary policies and procedures to fulfill these gaps. Understands and adheres to the Medical Center’s Code of Conduct. Familiar with the Medical Center’s Mission, Vision, and Values Statements. OTHER JOB DUTIES After cross-training, provides coverage for all divisions served by Respiratory Care Services as required. Keeps abreast of current literature, new developments and new equipment affecting the delivery of respiratory care; undergoes competency testing annually. Conducts in-service education for hospital staff as directed. Assists in inventory control as directed. Assists in performance improvement projects. Performs other related duties as required. BASIC COMPETENCIES Education Graduation from an AMA-approved Respiratory Therapy program required for new hires. Current NJ license as Respiratory Therapist required, CRT certified by the NRBC, BLS certification. Experience 1 year of critical care experience preferred. Skills Good oral and written communication skills. Good interpersonal skills. Speaks, reads and writes English to the extent required by the position. JOB SETTING/PHYSICAL DEMANDS Patient care areas, Respiratory Care Services office, off-site locations, decontamination area, tank yard; contact with staff, patients, family. Must be available for overtime and work on varied shifts as needed. Manual dexterity. Ability to distinguish colors. Ability to hear alarms, breath sounds, verbal instructions and respond to auditory cues. Occasional prolonged standing/walking. Occasionally lifts heavy supplies/equipment (up to 50 lbs.). Manual dexterity and mobility. Occasional reaching, stooping, bending, kneeling, crouching. Protective clothing required: protective goggles, mask, non-permeable gown, gloves, and particulate respirator Salary commensurate with experience within posted range. $33.12 TO $36.18 PER HOUR PLUS DIFFERENTIALS EVENING $2.40 PER HOUR, NIGHT $2.40, WEEKEND $1.75 We provide a comprehensive benefits package, including a competitive medical, dental, and vision plans. We prioritize work-life balance with a generous time off policy that includes ample vacation days, personal time, sick leave and nine paid holidays. Additionally, we are committed to the personal and professional growth of our employees, offering robust tuition reimbursement and continuing education programs to help support our employees ongoing development. Company DescriptionBergen New Bridge Medical Center, a clinical affiliate of Rutgers Biomedical and Health Sciences, is a 1,070 bed hospital located at 230 East Ridgewood Avenue in Paramus, NJ. Founded in 1916 to treat patients with contagious diseases, the medical center has grown to become both the largest hospital and licensed nursing home in New Jersey and the fourth-largest publicly-owned hospital in the nation. A safety net facility, Bergen New Bridge Medical Center, renamed in October 2017, provides high-quality comprehensive services including long term care, behavioral health care, substance abuse treatment, and acute care to the greater Bergen County community. The medical center, including its Long Term Care Division, is fully accredited by The Joint Commission. With 323 behavioral health beds and 84 medical detox beds, Bergen New Bridge Medical Center is one of the largest medical facilities providing a continuum of care for those in need of behavioral health and/or substance abuse treatment. Please apply on our website: New Bridge Medical Center, a clinical affiliate of Rutgers Biomedical and Health Sciences, is a 1,070 bed hospital located at 230 East Ridgewood Avenue in Paramus, NJ. Founded in 1916 to treat patients with contagious diseases, the medical center has grown to become both the largest hospital and licensed nursing home in New Jersey and the fourth-largest publicly-owned hospital in the nation. \r\n\r\nA safety net facility, Bergen New Bridge Medical Center, renamed in October 2017, provides high-quality comprehensive services including long term care, behavioral health care, substance abuse treatment, and acute care to the greater Bergen County community. The medical center, including its Long Term Care Division, is fully accredited by The Joint Commission. With 323 behavioral health beds and 84 medical detox beds, Bergen New Bridge Medical Center is one of the largest medical facilities providing a continuum of care for those in need of behavioral health and/or substance abuse treatment.\r\n\r\nPlease apply on our website:

Job Description:\n\n Director of Service - Integrated Security (SEC) About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary:The Director of Service – Integrated Security at Bosch Building Technologies North America (Bosch BT NA) is a critical leadership role responsible for driving the growth, efficiency, and excellence of our Integrated Security (SEC) service business. Reporting directly to the Senior Vice President, Services, this role shapes SEC service strategy, leads operational improvement initiatives, and ensures exceptional customer experiences while influencing the financial and operational performance of the Integrated Security service portfolio. Responsibilities: Strategic Leadership Develop and execute the national Integrated Security service strategy aligned with Bosch BT NA’s business objectives and customer expectations.Support a diverse team of service professionals, including managers, sales personnel (aligned to Service Sales Strategy), technicians, and support staff.Lead the Integrated Security service roadmap, market shifts, and competitive opportunities while staying aligned with customer needs.Build and champion a service-first mindset, partnering with branch leaders to drive consistent culture and operational excellence.Drive alignment across branches and acquired companies through M&A integration, standardization, and cultural adoption. Customer Relationship Management Serve as a key escalation point for complex SEC technical issues, supporting branch and field teams to strengthen customer trust.Support national and local teams in customer meetings to expand Bosch BT NA footprint and maintain high satisfaction levels.Engage and support service leadership in meeting commitments for high priority and national accounts.Promote a culture of responsiveness, accountability, and customer advocacy. Service Delivery Optimization and Operational Excellence Influence performance outcomes for the Integrated Security domain, including but not limited to; service agreement execution, renewal retention and performance, margin improvement, and broader KPI achievement.Establish SOPs for field services, including Service Agreement processes and Time & Material workflows.Evaluate, implement, and optimize tools, processes, service playbooks, and domain-specific standards that drive consistency and quality.Partner closely with branch teams to ensure consistent SEC service delivery, operational best practices, and continuous improvement. Technical & Market Expertise Maintain deep expertise in Integrated Security systems, including controls architectures, integration protocols, HVAC fundamentals, analytics tools, and connected building ecosystems.Incorporate competitive intelligence and market trends into strategic and operational initiatives.Identify emerging customer needs and future service offerings to support Bosch BT NA’s growth trajectory.Support sales and service teams in strategic account reviews, customer meetings, and service‑centric solution development. Performance & Financial Metrics Drive Integrated Security domain service performance outcomes by influencing revenue growth, margin improvement, service agreement execution, and operational efficiency across all support branches.Monitor and interpret key financial indicators, including labor utilization, agreement profitability, cost drivers, backlog health, and forecast accuracy that provides insights and recommendations that guide branch and regional leaders toward improved financial results.Collaborate with branch leadership and Service Business Operations to identify performance gaps, provide root-cause analysis, and co-develop corrective action plans tied to measurable operational improvement and financial uplift.Contribute to forecasting and planning through data‑driven insights on labor capacity, service demand, domain growth opportunities, and operational risks impacting financial performance. Cross-functional Collaboration Partner with the Digital Service Center (DSC) to enhance digital tool usage, drive adoption, and strengthen field enablement within Integrated Security specific workflows.Collaborate with Service Business Operations to ensure Integrated Security alignment on pricing strategies, service agreement estimation, ERP process compliance, and operational standards.Support M&A activities by evaluating Integrated Security capabilities, aligning service playbooks, and accelerating operational adoption in newly acquired organizations. Health and Safety Compliance Ensure all service activities adhere to health, safety, and environmental regulations. Supervisor Duties: In accordance with applicable Company policies/procedures and Federal/State laws, will perform the following supervisory responsibilities: planning, assigning, and directing work; coaching and appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Professional CompetenciesResilience: Ability to maintain composure and adapt swiftly amidst uncertainty and rapid changes.Strategic Agility: Capacity to analyze situations critically and make prompt, well-informed decisions, considering diverse scenarios and potential outcomes.Entrepreneurial Mindset: Willingness to take calculated risks and explore innovative solutions to drive growth and capitalize on opportunities.Collaborative Leadership: Skill in fostering collaboration and teamwork across diverse stakeholders and departments to achieve common objectives.Resourcefulness: Ability to effectively leverage available resources, networks, and expertise to address challenges and capitalize on synergies.Attention to Detail: Capability to manage intricate details and nuances, ensuring thorough planning and execution of strategic initiatives.Emotional Intelligence: Aptitude in understanding and managing emotions to navigate sensitive situations, negotiate effectively, and build strong relationships.Adaptability: Willingness and ability to adjust strategies and approaches in response to evolving market dynamics, regulatory requirements, or unexpected developments.Clear Communication: Strong communication skills to articulate complex ideas, influence stakeholders, and navigate challenging conversations.Ethical Integrity: Commitment to upholding high ethical standards and integrity, ensuring transparency and compliance with regulations and corporate governance principles. Required Qualifications: 8–10 years of leadership experience in service operations and/or service sales, including oversight of service delivery for building automation, fire & life safety, and security systems.Demonstrated experience managing or directing field service teams and service project execution within (SEC) Knowledge of industry-specific regulations, legislative standards, and best operational practicesExperience in preparing, administering, and analyzing department budgets.A valid Driver’s License and ability to pass pre-employment screens Preferred Qualifications:Bachelor’s degree in business, engineering, or a relevant technical field Previous and progressive experience in Service/Operational leadership within a specific domain (SEC)Experience developing and implementing national service standards, including SOPs, domain specific service playbooks, and process guidelinesStrong background in service business growth strategy, including market/competitive analysisAbility to collaborate cross functionally with sales, operations, and field teams to drive service initiativesHarmonization of Service Departments through Merger & Acquisition activity Experience with Microsoft Dynamics 365 or similar ERP / Service Operations platforms Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to effectively communicate in English, (ie see, hear, speak and write clearly) in order to communicate with colleagues and/or customers Manual dexterity required for occasional reaching, lifting of light office objects, and operating office equipment Sitting, standing, walking in office environments and construction sites The employee must occasionally lift and/or move up to 50 pounds and may be required to work at heights over 1.8m (6 feet) Working Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. The office is clean, orderly, properly lighted and ventilated. Noise levels are considered low to moderate Will be required to be on site with customers or contractors, with or without colleagues to manage the expectations and deliverables. Sites range from general office environments to new construction. Driving to customer sites is required Limited overnight travel may be required Additional Information: Compensation: $135,000 - $180,000 (DOE) Working Hours: This position generally works Monday - Friday, overtime and on call when necessaryTravel Requirements: 30-40% Bosch Discounts: As an associate of Bosch, you will have access to various discount programs at Bosch Benefits: MedicalDentalVisionFlexible Spending Accounts401K w/ company matchLife/AD&D/LTDPaid Vacation/Sick/HolidaysEmployee Assistance ProgramPet Insurance Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable AccommodationsIf you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description Primary Job Title: Medical Laboratory Scientist Alternate/Related Job Titles: Clinical Laboratory Scientist Medical Technologist Clinical Lab Technologist Laboratory Scientist Medical Laboratory Technologist Location: Clifton, NJ Onsite Flexibility: Onsite Contract Details (Contract roles only): * Position Type: Contract * Contract Duration: 6 months * Start: As Soon As Possible * Pay Rate: $25/hr Job Summary: The Medical Laboratory Scientist performs complex laboratory testing and analysis while ensuring compliance with regulatory standards and quality control procedures. This role is responsible for specimen testing, result validation, documentation, and maintaining laboratory quality and safety standards in accordance with established clinical laboratory protocols. Key Responsibilities: * Follow the laboratory's procedures for specimen handling and processing, test analyses, reporting and maintaining records of patient test result. * Maintain records that demonstrate that proficiency testing samples are tested in the same manner as patient specimens. * Analyze specimens using approved testing procedures (see department SOPs). * Review and release test results. * Follow CLIA, HIPAA, OSHA, and safety guidelines as described in their respective guidelines. * Adhere to the laboratory's quality control policies, document all quality control activities, instrument and procedural calibrations and all maintenance performed. * Follow the laboratory's established policies and procedures whenever test systems are not within the laboratory's established acceptable levels of performance. * Identify problems that may adversely affect test performance or reporting of test results, correct the problems encountered or immediately notify the senior technologist or supervisor. * Document all corrective actions taken when test systems deviate from the laboratory's established performance specifications. * Follow department's procedure in reporting STATS or Critical results to clients. * If applicable, answer questions from customers or other lab personnel. * Maintain complete records of all testing performed on-site. * Maintain general appearance of the department. * Make sure reagents/test kits have received dates, expiration dates, and if applicable opened dates. * Review/train on new procedures. * Attend monthly department and additional training/educational meetings. * Participate in all applicable safety training sessions and know the location and contents of the safety manual and applicable safety equipment. * Participate in government or regulatory agency inspections if needed. * Perform other duties as directed by supervisor. Required Experience: * Solid understanding of basic laboratory testing and laboratory operations. * Strong computer skills and the ability to work within multiple laboratory computer systems. * Knowledge of quality control (QC) and quality assurance (QA) processes. * Knowledge of multiple laboratory testing areas. * Minimum of 1 year of clinical laboratory experience in highly complex testing for candidates with BS/BA in Chemistry or Biology. * National and State licensure as required. Nice-to-Have Experience: * 1 year clinical experience performing high complexity testing. * Experience working in regulated clinical laboratory environments. Required Skills: * Clinical laboratory testing and analysis * Quality control and quality assurance procedures * Laboratory data analysis and result validation Preferred Skills: * Knowledge of CLIA laboratory standards * Laboratory instrumentation and calibration * Clinical laboratory information systems * Regulatory compliance and documentation * Troubleshooting laboratory test performance issues Additional Skills: * Specimen handling and processing * Test analysis and reporting * Record maintenance and documentation * SOP adherence * Corrective action documentation * Critical result reporting * Customer and internal lab communication * Regulatory inspection support * Safety training participation * Laboratory equipment handling Benefits: * Medical, Vision, and Dental Insurance Plans * 401k Retirement Fund About the Client: Leading provider of diagnostic information services empowering healthier lives. Leveraging the world's largest clinical lab database, the organization offers insights to identify and treat diseases, promote healthy behaviors, and improve healthcare management. Serving millions of patients and healthcare providers worldwide, the company is committed to advancing healthcare outcomes and delivering value through innovative diagnostic services. About GTT: GTT is a minority-owned staffing firm and a subsidiary of Chenega Corporation, a Native American-owned company in Alaska. We highly value diverse and inclusive workplaces and support Fortune 500 organizations across banking, financial services, technology, life sciences, biotech, utilities, and retail sectors throughout the U.S. and Canada. Job Number: 26-02404 Hashtags: #gttqst #gttjobs Company DescriptionGlobal Technical Talent is a subsidiary of Chenega Corporation () with over 1.3 billion US$ in revenue and 5800 US employees. We provide Total Talent Solutions, Global staffing, SOW, RPO, Direct Sourcing, and Global Payroll with physical offices in US, Canada, and India. GTT Digital headquartered in Toronto specializes in providing high-tech digital and banking talent to some of the nation’s largest financial institutions. As a leader in the staffing industry for over 22 years, we have become one of the largest staffing firms in the New England region, working with Fortune 500 clients and cutting-edge, technology-driven recruiting infrastructure. We are a Native American-owned, economically disadvantaged corporation that highly values diverse and inclusive workplaces. Our clients and partners are among the most successful and innovative organizations in the world. Our top clients are Fortune 500 banking, insurance, and financial services firms, some of the nation’s largest life sciences, biotech, utility, and retail companies, and prestigious educational institutions in the Ivy League tier. There is always a new opportunity for success when you look through all of the open job opportunities on our website’s career page. Just click on this link: Awards SIA’s Fastest Growing Staffing Firm: 2023 and 2015 SIA’s Best Staffing Firm to Work for: 2019 -2023 Inc 5000 Fastest Growing Private Company: 2023, 2022, 2016, 2015 Randstad Preferred Supplier: 2020 - 2023 TechServe Alliance Excellence Award. 2019 NH Business Magazines Fast 5 fastest growing companies Ernst & Young Entrepreneur of the Year Finalist: 2015Global Technical Talent is a subsidiary of Chenega Corporation () with over 1.3 billion US$ in revenue and 5800 US employees. We provide Total Talent Solutions, Global staffing, SOW, RPO, Direct Sourcing, and Global Payroll with physical offices in US, Canada, and India. GTT Digital headquartered in Toronto specializes in providing high-tech digital and banking talent to some of the nation’s largest financial institutions. As a leader in the staffing industry for over 22 years, we have become one of the largest staffing firms in the New England region, working with Fortune 500 clients and cutting-edge, technology-driven recruiting infrastructure.\r\n\r\nWe are a Native American-owned, economically disadvantaged corporation that highly values diverse and inclusive workplaces. Our clients and partners are among the most successful and innovative organizations in the world. Our top clients are Fortune 500 banking, insurance, and financial services firms, some of the nation’s largest life sciences, biotech, utility, and retail companies, and prestigious educational institutions in the Ivy League tier.\r\n \r\nThere is always a new opportunity for success when you look through all of the open job opportunities on our website’s career page. Just click on this link: \r\n \r\nAwards\r\n\r\nSIA’s Fastest Growing Staffing Firm: 2023 and 2015\r\nSIA’s Best Staffing Firm to Work for: 2019 -2023\r\nInc 5000 Fastest Growing Private Company: 2023, 2022, 2016, 2015\r\nRandstad Preferred Supplier: 2020 - 2023\r\nTechServe Alliance Excellence Award. 2019\r\nNH Business Magazines Fast 5 fastest growing companies\r\nErnst & Young Entrepreneur of the Year Finalist: 2015

Job DescriptionTitle: Compounder Reports to: Manager, Manufacturing Department: Operations Responsibility Summary: The Compounder will operate, clean, sanitize, inspect, set-up, disassemble, scales, kettles, mills, extruders, ovens and other associate equipment. The compounder will also handle, measure, add, mix, heat, cool, package, label raw materials, bases, bulks, leads, and other material, and train others as directed. Responsibilities: The Compounder is responsible for supporting the company's business events through a variety of tasks, including: • Safety- Take full responsibility for your personal health and safety by:, • Following all safety related SOP’s, signs, directions, etc. to safeguard against any incidents or unsafe conditions., • Performing all designated safety checks and inspections and taking appropriate actions to insure safe operation., • Wearing all required Personal Protective Equipment (PPE) all the time., • Ensuring all safety guards, interlocks and protective devises are in place and operational., • Reporting all incidents, near misses and safety concerns immediately., • Maintain a neat and tidy work area at all times., • Quality – Take full responsibility for the Quality of our product by:, • Understanding and following all cGMP requirement., • Following all quality related SOP’s, signs, directions, etc. to safeguard against any defects, product contamination or material/component mix up., • Performing all designated/assigned quality checks, inspections and basic testing and taking appropriate actions to insure conformance to EWL and Customer standards., • Wearing all required Personal Protective Equipment (PPE) all the time to prevent product contamination., • Ensuring all quality checking devises are in place and operational., • Completing all required documents, checklists and forms in a timely, accurate and compliant manner., • On-Time Delivery – Work with purpose to eliminate wasted time and effort and ensure orders are completed on time, in full by:, • Following the schedule and reporting any delays that may extend a run beyond its scheduled completion date/time., • Monitoring equipment performance and reacting accordingly to any issues that will negatively impact safety, quality and rate., • Understanding the schedule and anticipating requirements of next order to minimize time between orders (without sacrificing safety or quality)., • Cost – Focusing on executing all tasks in line with SOP’s and training to:, • Avoid errors that might result in quality issues., • Minimize scrap and waste., • Intermediate math skills., • Trained in cGMP requirements, including batch documentation and sanitization., • Quality oriented resolute., • Computer skills are required. Will use a tablet and bar code scanner to enter data., • Physically capable of manual labor that includes lifting, bending, and reaching., • Able to operate large industrial machinery., • Able to lift 50 lbs., • Able to work 8 hour shifts standing., • Reliable and punctual., • Speaks, reads, and writes English with clarity, comprehension, and legibility, respectively., • Physically capable of manual labor that includes lifting, bending, and reaching, • Self-motivated with the ability to work responsibly and independently with minimal supervision., • Education:, • High School Diploma/GED or relevant experience. Powered by JazzHR 9aLAzn7y3S

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at the role The Senior Production Engineering team sits at the heart of CoreWeave's reliability efforts. In this role, you'll partner closely with our Support/CX teams to build, operate, and evolve internal tooling that enables a "Direct‑to‑Expert" support model at scale. You'll define and ship AI‑assisted workflows, self‑service diagnostics, and platform integrations that reduce time‑to‑resolution and improve customer experience across our cloud. What you'll do • Design, build, and own support-facing tools for case triage, intelligent routing, and expert engagement, integrating with incident and change management workflows., • Develop AI‑powered assistants and automations that accelerate root‑cause discovery, knowledge retrieval, and resolution quality., • Create and maintain dashboards, alerts, and signals that surface tooling issues early; integrate observability into new tooling to reduce MTTR., • Build self-service and guided diagnostics that empower Support/CX to resolve common issues and collect high‑quality context for escalations., • Codify reliability and support practices into services, APIs, and Kubernetes-native controllers/operators where appropriate., • Partner with engineering leadership and internal stakeholders to prioritize roadmap initiatives, land adoption, and measure business impact., • Participate in an on‑call rotation for the tooling you own.What you've worked on (Minimum qualifications), • 4+ years of software or infrastructure engineering experience building and operating production services., • Proficiency in Go or Python (or equivalent experience)., • Strong fundamentals in Linux, containers, and Kubernetes; comfortable debugging in distributed systems., • Experience with observability (metrics/logs/traces) and using data to improve reliability and support outcomes., • Demonstrated experience with incident management and steady‑state operational excellence (e.g., progressive delivery, testing strategies, error budgets, fault‑tolerant design)., • Comfort collaborating with multiple stakeholders (Support/CX, Product, SRE, and service owners).Preferred qualifications, • Experience integrating or building support/operations tooling (e.g., ticketing/incident systems, status page, knowledge management, chat/alerting integrations)., • Experience automating manual workflows and stitching together productivity platforms., • Familiarity with AI/ML tooling for retrieval, summarization, or copilot‑style assistance. The base salary range for this role is $139,000 to $204,000. The starting salary will be determined based on job-related knowledge, skills, experience, and market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration. California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job DescriptionJob Description: Employee Health Coordinator Date: March 31, 2026 Facility: Hudson Regional Health Status: Full-Time | Non-Exempt (Hourly) Job Summary Hudson Regional Health is seeking a highly motivated and proactive Employee Health Coordinator to join our team. This role is essential in maintaining the safety and clinical compliance of our workforce across our network. As the primary point of contact for employee wellness, you will manage vaccinations, respiratory fit testing, and departmental documentation. We are looking for a CCMA who possesses exceptional communication skills and the ability to take initiative in a fast-paced environment. Compensation & Requirements * Pay Rate: $23.00 – $25.00 per hour * Certification: Active CCMA (Certified Clinical Medical Assistant) required. * Experience: 1–2 years of clinical experience, with specific expertise in vaccinations and office administration. * Travel: Must have reliable transportation; this position requires regular commuting between our hospital campuses in Secaucus, Bayonne, and Hoboken. Key Responsibilities * Clinical Outreach & Immunizations: * Administer and document employee vaccinations (Flu, Hep B, MMR, Tdap, etc.). * Execute TB screening programs, including PPD placement and reading. * Proactively monitor vaccine inventory and expiration dates across locations. * Respiratory Protection Program: * Conduct N95 Fit Testing for clinical and non-clinical staff at various sites. * Clearly communicate safety protocols and proper PPE usage to ensure staff feel confident and protected. * Departmental Coordination & Support: * Maintain meticulous employee health records in compliance with HIPAA and OSHA. * Identify upcoming compliance deadlines and proactively reach out to staff/managers to schedule required screenings. * Provide high-level administrative support, including data entry, filing, and answering departmental inquiries. * Effective Communication: * Act as a professional liaison between the Employee Health Department and other hospital units. * Handle sensitive health information with extreme discretion and a supportive attitude. Qualifications & Core Competencies * Proactive Personality: A "self-starter" who anticipates the needs of the department and takes initiative without constant supervision. * Communication Excellence: Ability to speak and write clearly, ensuring employees across all campuses understand their health requirements. * Clinical Proficiency: Demonstrated skill in intramuscular and intradermal injections. * Technical Literacy: Proficient in Microsoft Office (specifically Excel for tracking) and familiar with Electronic Health Records (EHR). Physical Requirements * Must be able to stand, walk, and sit for extended periods. * Manual dexterity for clinical tasks (injections and fit testing). * Ability to travel between multiple facility locations during the workday.

Job Description ELLKAY started out providing connectivity solutions to laboratories and within a few years, grew to also provide data management solutions to ambulatory organizations. ELLKAY is now a trusted data management partner in five healthcare segments. ELLKAY’s solutions continue to serve laboratories and ambulatory practices and have expanded to empower hospitals and health systems, healthcare IT vendors, ambulatory practices, health plans, and other healthcare organizations with cutting-edge technologies and solutions that drive their growth and interoperability strategies. Today, ELLKAY remains true to our core values, building strong partner relationships and offering unparalleled service and support while providing innovative, scalable solutions to the challenges our customers face in today’s data-rich world. ELLKAY's experience, customer-focused approach, and reputation for innovation, speed, and accuracy differentiate ELLKAY as a premier partner for your interoperability needs and data management strategy. Job Description: This role runs the day-to-day product work for Oasis. You will take the product strategy and turn it into shipped outcomes: clear requirements, predictable delivery, and measurable improvements that help customers decommission legacy systems while retaining secure access to historical clinical, financial, and operational data. You will manage the product backlog, partner tightly with engineering and delivery, and coach a small team so product development stays fast, focused, and grounded in real workflows Essential Duties & Responsibilities: • BASE (first 6–12 months): Stabilize execution and increase delivery velocity by tightening requirements, release quality, and the improving the product development lifecycle., • GROWTH (year 1+): Expand Oasis capabilities and reduce manual work across migrations and archives, with deeper support for major source systems such as Epic, Oracle Health, and MEDITECH., • FUTURE (long-term): Build Oasis into a durable data foundation that makes historical data easier to find, validate, and reuse for analytics and future artificial intelligence use cases., • Run the full product development cycle: discovery, requirements, prioritization, sprint planning, release, and follow-through., • Own the Oasis backlog and weekly priorities across clinical archive, financial archive, and legacy system decommissioning initiatives., • Translate customer and delivery needs into clear product requirements and acceptance criteria that engineering can build without guesswork., • Lead weekly planning with engineering: break work into deliverable increments, manage scope, remove blockers, and keep commitments realistic., • Manage day-to-day team performance: set goals, coach product managers and analysts, and build a culture of high-quality execution., • Own requirements for extracting data from legacy electronic medical record systems, including Epic, Oracle Health, and MEDITECH, covering both structured and unstructured content., • Guide development of migration tooling that supports discrete data delivery for import into a new electronic health record when required, while also supporting complete historical archiving., • Create and execute strategic roadmaps including unit economics and financial impact., • Hands-on product management including roadmap development, execution, and defining financial targets, and real delivery ownership (shipping product, not just planning)., • Strong understanding of healthcare data handling, including legacy system retirement, record retention, and secure access to historical data., • Practical ownership of data extraction, data migration, and data translation work, including mapping, testing, and validation., • Comfort with product areas that drive daily usability: search, reporting, access control, auditing, and secure output.Experience, • 4 - 7 years of experience in product management and healthcare IT, • Working directly with engineering teams in an active development cycle, including sprint planning and release management., • Coaching and managing a small team while coordinating across product, engineering, delivery, and support., • Working knowledge of major electronic medical record systems such as Epic, Oracle Health, and MEDITECH, and the realities of moving data out of them., • Experience supporting workflows such as compliance-driven record requests, audits, and continuity of care during system transitions.How to Stand Out, • Prior product management experience in a healthcare technology company, health system, payer, laboratory, or services organization that handles sensitive healthcare data., • Evidence you can run day-to-day execution: turn ambiguity into requirements, ship on schedule, and improve outcomes over time., • Strong writing and communication skills that keep engineering and delivery aligned and reduce rework., • Comfort making tradeoffs and saying no when needed to protect delivery quality and timelines., • Experience with healthcare data products including data lakes, extraction and conversion of healthcare data and their underlying technologies. Benefits: ELLKAY offers a comprehensive and competitive benefit package that starts day one! Including: • Medical, Dental, and Vision benefits, • Employer-paid Life and LTD, • 401k w/ matching – once eligibility is met, • Work/life balance, • Paid Volunteer Program, • Flexible working hours, • Generous FTO, • Remote work options, • Employee Discounts, • Working with talented, collaborative, and friendly people who love what they do, • Professional growth within, • Innovation environment At ELLKAY, we are committed to operating as a hybrid workplace, offering employees flexibility in how they structure their time between in-office and remote work. We recognize the significance of fostering connections, collaboration, and creativity within our office culture and its positive impact on our business. Our philosophy of operating as a hybrid workplace underscores our dedication to enabling employees to tailor work-life balance to their individual preferences. For those who do not live within 40 miles of one of our offices, we are open to considering remote work for candidates whose skills and experience strongly align with the role. While we prioritize a hybrid work environment for most roles, we understand the importance of flexibility and are open to remote work for specific positions and specialized skill sets. For more information on our company, visit . ELLKAY LLC is a Smoke-Free Workplace. ELLKAY, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Overview Are you looking for a career you can feel good about? We hire only those that strive to do their best. By joining our family, you'll receive the honor and recognition that comes with working for the industry's global leader in evidenced based rehabilitation. Who We Are: GEO provides complementary, turnkey solutions for numerous government partners worldwide across a spectrum of diversified correctional and community reentry services. From the development of state-of-the-art facilities and the provision of management services and evidence-based rehabilitation to the post-release reintegration and supervision of individuals in the community, GEO offers fully diversified, cost-effective services that deliver enhanced quality and improved outcomes. Why Work for GEO: • We believe that work is more than a place you go to every day. It is about being inspired and motivated to achieve extraordinary things., • Employee benefits play an important role in making The GEO Group a great place to work. At GEO, we believe in the three pillars of employee wellbeing: physical, emotional, and financial. With comprehensive benefits and competitive wages, we trust that you will find all the resources you need here to be successful. Responsibilities Summary This position maintains continuous state of alertness and awareness to control and secure the facility and residents. Operates within legal constraints and contract agency stipulations. Primary Duties and Responsibilities • Ensures that the equipment necessary for each watch is operational including radios, flashlights, and keys prior to relieving the watch. Prepares shift documentation including shift reports, work orders, security reports, and unusual incidents that are legible, concise and that meet facility’s standards and contracting agency requirements., • Receives necessary information from previous shift personnel pertaining to events that transpired during the shift such as resident medical problems, disciplinary problems, or new arrivals and any special instructions. Relieves the watch and informs necessary personnel that the watch has been relieved. Makes entries into the security log showing the time the watch was relieved noting name and title., • Conducts radio checks documenting results in the security log. Conducts facility counts at the prescribed times and ensures the logbooks in the buildings are accurate as to count., • Frequently patrols building to observe and listen to individual residents and groups of residents and monitors the state of the building. Examples of activities include smelling for marijuana, listening to conversations, or ensuring doors and windows are properly secured., • Ensures that the building picture board has a picture of all residents assigned to the building and that the picture is in the proper bed slot., • Organizes and supervises resident work details to assist in maintaining facility cleanliness to ensure that facility meets facility’s and contracting agency requirements., • Performs activities on both a scheduled and random basis including urinalysis testing, pat-downs, shakedowns, counts, or breath tests, to maintain control and security of the residents and facility., • Documents disciplinary action for rule violations according to procedure to comply with contracting agency requirements and log accordingly., • Conducts scheduled and impromptu cleanliness checks of the facility and resident’s personal belonging to maintain it in an orderly and clean fashion to meet health and environmental requirements. This includes all rooms within the facility and residents’ personal belongings. Welcomes visitors and verifies their identity while maintaining professionalism and courtesy at all times., • Communicates with residents and staff in a professional manner to affirm and enhance self esteem, dignity, and to maintain positive resident and staff relations., • Participates in staff meetings by sharing observations and recommendations regarding the facility, residents and staff relations to identify and resolve problems and function as a unified team., • Maintains confidentiality obtained through job duties regarding employees, vendors, residents, or outside agencies so that sensitive information is only given on a "need to know" basis., • Complies with company policies and work rules as described in the company Employee Handbook, the Statement of Work, and the Facility Policies and Procedures Manual., • Adheres to attendance policies and is available to work any shifts or work overtime to ensure adequate coverage of the program and to ensure the safety and security of the residents., • Complies with facility safety rules and takes appropriate corrective action to ensure work is performed in a safe manner and without injury to self or others., • Communicates effectively with all levels of staff in a manner that promotes a team spirit and a sense of cooperation., • Performs other duties as assigned. Qualifications Minimum Requirements • High school diploma or equivalent., • One (1) year general work experience. Experience in a related field is preferred., • Sufficient organizational skills to keep the workflow on-going in an orderly manner., • Ability to express thoughts logically, in both written and verbal form using correct grammar., • Demonstrated flexibility in order to perform a wide range of duties., • Ability to interact effectively with others and learn supervisory techniques., • Ability to maintain positive relation with staff and residents., • Ability to motivate and create an atmosphere of enthusiasm toward work ethic., • Ability to express thoughts logically, in both written and verbal form using correct grammar., • Ability to demonstrate flexibility in order to perform a wide range of duties.

Job DescriptionBenefits: • Paid time off We specialize in the manufacturing of tight tolerance medium to complex aerospace components and assemblies. We are AS9100D. Qualifications • Minimum 2-5 years experience in manufacturing / job-shop environment, • Solid working knowledge with: blue print reading, inspection instruments, tolerancing, GD&T, etc, • Knowledge of Mitutoyu MiStar 555 desired., • The ability to multi-task while accurately performing in-process and final inspections on CNC manufactured parts is a must, • Experience inspecting close tolerance parts (.001 to .0005) using inspections tools such as micrometers, linear height gage, CMM, depth mics, etc, • Perform job responsibilities according to internal process specifications and third-party requirements, • Utilize proper PPE, safety equipment, and follow safety procedures, • Assist support functions in root cause analysis, • Must be able to multi-task and work within deadlines, • Proactively work to improve efficiency and quality of products, • Use manual and automated measuring / testing equipment to assure product quality, • Cross-train with employees as needed based upon knowledge and experience, • Compliantly complete all written and/or electronic labor tracking documentation, • Report problems to appropriate resource and/or Coach, • Keep all shift operators informed on special problems involving operation or set up, • Communicate with team to ensure all team members are aware of product deficiencies, new processes, or issues, • Provide feedback to appropriate support functions

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. * Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs. * Demonstrating a willingness to help others and be a team member * Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services. * Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company. * Provide voice of Customer feedback. * Through service and Customer relationships, build brand dedication. * Conduct travel and work in a safe manner, constantly learning new technology and soft skills. * Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues. * Effectively understand and use the Salesforce Lightning Customer Support computer system. Qualifications & Competencies: * Proficient verbal and written communication and Customer relation skills. * Able to interact and effectively communicate in person and over the phone with customer and co-workers. * Present a professional image. * Must be adaptable to changes and able to deal with change, delays, or general work-related issues. * Basic digital literacy and shown understanding of MS Word, Excel, and Outlook. * Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.). * Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus. * Basic mechanical and logical solving skills are a must. * Rational decision making and problem-solving skills. Work Environment * Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: * Perform related duties as required The duties listed above are intended only as illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. What’s in it for You: * We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: Competitive starting salary * Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance * 3+ Weeks’ Vacation to Start * 10 Company Paid Holidays * 401(k) retirement plan with company contribution Tuition reimbursement * Employee appreciation events and perks Employee Assistance Program Mental and Physical Requirements: The physical demands and characteristics of the work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. * Must be highly mobile, able to access all areas of the premises. * Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. * Ability to sit for prolonged period of times. * Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. * Ability to frequently use hands and arms. * Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. * Ability to work responsibly and professionally in dynamic job sites that may involve tight timelines, changing priorities, and interaction with customers and team members. Certain positions are designated as safety-sensitive due to the nature of the work performed. Employees in these roles may also be expected to: * Ability to stand, walk, bend, kneel, crouch, climb, and reach for extended periods while servicing equipment. * Ability to work in tight spaces or awkward positions, including accessing equipment interiors and elevated areas. * Strong hand–eye coordination and fine motor skills required for precise electrical, mechanical, and diagnostic work. * Ability to work in industrial environments, with exposure to noise, lubricants, coolants, metal chips, and other manufacturing conditions, while consistently wearing required personal protective equipment (PPE). Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #: 1439B, Wayne NJ

Job Description Overview Are you looking for a career you can feel good about? We hire only those that strive to do their best. By joining our family, you'll receive the honor and recognition that comes with working for the industry's global leader in evidenced based rehabilitation. Who We Are: GEO provides complementary, turnkey solutions for numerous government partners worldwide across a spectrum of diversified correctional and community reentry services. From the development of state-of-the-art facilities and the provision of management services and evidence-based rehabilitation to the post-release reintegration and supervision of individuals in the community, GEO offers fully diversified, cost-effective services that deliver enhanced quality and improved outcomes. Why Work for GEO: • We believe that work is more than a place you go to every day. It is about being inspired and motivated to achieve extraordinary things., • Employee benefits play an important role in making The GEO Group a great place to work. At GEO, we believe in the three pillars of employee wellbeing: physical, emotional, and financial. With comprehensive benefits and competitive wages, we trust that you will find all the resources you need here to be successful. Responsibilities Summary This position maintains continuous state of alertness and awareness to control and secure the facility and residents. Operates within legal constraints and contract agency stipulations. Primary Duties and Responsibilities • Ensures that the equipment necessary for each watch is operational including radios, flashlights, and keys prior to relieving the watch. Prepares shift documentation including shift reports, work orders, security reports, and unusual incidents that are legible, concise and that meet facility’s standards and contracting agency requirements., • Receives necessary information from previous shift personnel pertaining to events that transpired during the shift such as resident medical problems, disciplinary problems, or new arrivals and any special instructions. Relieves the watch and informs necessary personnel that the watch has been relieved. Makes entries into the security log showing the time the watch was relieved noting name and title., • Conducts radio checks documenting results in the security log. Conducts facility counts at the prescribed times and ensures the logbooks in the buildings are accurate as to count., • Frequently patrols building to observe and listen to individual residents and groups of residents and monitors the state of the building. Examples of activities include smelling for marijuana, listening to conversations, or ensuring doors and windows are properly secured, • Ensures that the building picture board has a picture of all residents assigned to the building and that the picture is in the proper bed slot., • Organizes and supervises resident work details to assist in maintaining facility cleanliness to ensure that facility meets facility’s and contracting agency requirements., • Performs activities on both a scheduled and random basis including urinalysis testing, pat downs, shakedowns, counts, or breath tests, to maintain control and security of the residents and facility., • Documents disciplinary action for rule violations according to procedure to comply with contracting agency requirements and log accordingly., • Conducts scheduled and impromptu cleanliness checks of the facility and resident’s personal belonging to maintain it in an orderly and clean fashion to meet health and environmental requirements. This includes all rooms within the facility and residents’ personal belongings. Welcomes visitors and verifies their identity while maintaining professionalism and courtesy at all times., • Communicates with residents and staff in a professional manner to affirm and enhance self-esteem, dignity, and to maintain positive resident and staff relations., • Participates in staff meetings by sharing observations and recommendations regarding the facility, residents and staff relations to identify and resolve problems and function as a unified team., • Maintains confidentiality obtained through job duties regarding employees, vendors, residents, or outside agencies so that sensitive information is only given on a "need to know" basis., • Complies with company policies and work rules as described in the company Employee Handbook, the Statement of Work, and the Facility Policies and Procedures Manual., • Adheres to attendance policies and is available to work any shifts or work overtime to ensure adequate coverage of the program and to ensure the safety and security of the residents., • Complies with facility safety rules and takes appropriate corrective action to ensure work is performed in a safe manner and without injury to self or others., • Communicates effectively with all levels of staff in a manner that promotes a team spirit and a sense of cooperation., • Performs other duties as assigned. Qualifications Minimum Requirements • High school diploma or equivalent., • Valid Driver's license. This position includes driving., • One (1) year general work experience. Experience in a related field is preferred., • Sufficient organizational skills to keep the workflow on-going in an orderly manner., • Ability to express thoughts logically, in both written and verbal form using correct grammar., • Demonstrated flexibility in order to perform a wide range of duties., • Ability to interact effectively with others and learn supervisory techniques., • Ability to maintain positive relation with staff and residents., • Ability to motivate and create an atmosphere of enthusiasm toward work ethic., • Ability to express thoughts logically, in both written and verbal form using correct grammar., • Ability to demonstrate flexibility in order to perform a wide range of duties

Job Description About the Role: The Clinical Lab Supervisor plays a critical role in ensuring the accuracy and efficiency of laboratory operations for andrology and endocrinology testing in the CCRM Fertility lab. This position is responsible for overseeing laboratory staff, managing workflow, and ensuring compliance with regulatory standards. The supervisor will also be instrumental in implementing quality control measures and optimizing laboratory processes to enhance service delivery. By fostering a collaborative environment, the supervisor will support the professional development of team members while maintaining high standards of patient care. Ultimately, this role contributes to the overall mission of providing reliable and timely laboratory results that inform insurance decisions and improve client outcomes. Minimum Qualifications: • Bachelor's degree in Clinical Laboratory Science, Chemistry, Biology or a related field (qualified for high complexity testing), • A minimum of 3 years of experience in a clinical laboratory setting, with at least 1 year in a supervisory role, • MLS or MLT, • Oversee daily operations of the clinical laboratory, ensuring compliance with all regulatory and safety standards., • Hands on lab work as required, • manual semen analysis (count, motility, morphology, • IUI preparation, • sperm cryo, • hormone testing (Cobas analyzer), • Manage and mentor laboratory staff, providing training and support to enhance their skills and performance., • Implement and monitor quality control procedures to ensure the accuracy and reliability of laboratory results., • Coordinate with other departments to streamline processes and improve overall laboratory efficiency., • Prepare and maintain documentation related to laboratory operations, including reports and compliance records. The required skills for this position include strong leadership abilities, which are essential for managing a diverse team and fostering a positive work environment. Attention to detail is crucial in ensuring compliance with regulatory standards and maintaining the accuracy of laboratory results. Effective communication skills are necessary for collaborating with other departments and conveying important information to staff and stakeholders. Problem-solving skills will be utilized daily to address operational challenges and implement improvements in laboratory processes. Additionally, proficiency in laboratory information systems will aid in managing data and enhancing workflow efficiency.

Job Description Job Overview: The Residential Aide reports to the House Manager. He/she is responsible for the monitoring of the residents, works closely with the supervisor, and communicates all activities of the house. Duties 1. Embodies Eva’s Village’s core values, voice, and tone in order to provide an exceptional and effective experience for our clients, funders, employees and volunteers, 2. Must be completely familiar with all rules of the program., 3. Maintains the sign-in/sign-out sheets., 4. Maintains activities log with NA/AA meetings, van, etc., 5. Maintains the communication book., 6. Responsible for answering the phone, relaying calls, and taking messages., 7. Responsible for mail distribution., 8. Inspects and makes sure that all work details assigned to the residents are completed., 9. Responsible for the security of the program. This includes following the visitor protocol and observing the camera., 10. Monitors and documents client behavior., 11. Must be flexible., 12. Responsible for all incidents concerning resident problems being reported promptly., 13. Promptly reports to the House Manager any problems concerning the van, maintenance, supplies or any household problems., 14. Interface with residents, referring their problems to the proper person resulting in the resident getting the assistance they need., 15. Attends mandatory monthly in-service and staff meetings., 16. Responsible for urine testing/breathalyzers and recording of tests and results., 17. Monitors and documents resident medication., 18. Reports all repairs and wear & tear to House Manager., 19. Responsible for weekly inspection of rooms., 20. Must be completely familiar with policy and procedures of the program., 21. Must be able to perform intake and orientation to the program for new clients., 22. Must be willing to learn client-oriented system of care. This includes the Client Centered Approach as well as the Trauma Informed Care Approach., 23. Serves as a liaison between the residents and House Managers., 24. Oversees periodic special work details., 25. Facilitates didactic/educational groups as assigned., 26. Serves as a role model., 27. Performs crisis intervention when necessary., 28. Responsible for the arrangement of transportation of residents to meetings, hospitals, etc. and if need be, may be asked to drive., 29. Must perform tasks delegated by the immediate supervisor within the scope of the policy and procedures manual. Qualifications EDUCATION: High School Diploma or GED equivalent Bachelor’s or Associates degree preferred Valid driver’s license If in recovery, a minimum of two years clean EXPERIENCE: Thorough knowledge of 12-Step program, AA, NA, and the biopsychosocial model of substance abuse/dependence Ability to speak, read, and write English Must be able to work independently and complete assignments with minimal supervision Good interpersonal skills are required Must maintain a professional demeanor and perform duties effectively in stressful/emergency situations Must be able to maintain objectivity and deal diplomatically with clients and family members. Must have at least one year experience in the field The actual compensation will be determined based on experience, education and qualifications.

Job Description:\n\n Director of Service - Building Automation Systems (BAS) About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary:The Director of Service – Building Automation Systems (BAS) at Bosch Building Technologies North America (Bosch BT NA) is a critical leadership role responsible for driving the growth, efficiency, and excellence of our Building Automation Systems (BAS) service business. Reporting directly to the Senior Vice President, Services, this role shapes BAS service strategy, leads operational improvement initiatives, and ensures exceptional customer experiences while influencing the financial and operational performance of the Building Automation service portfolio. Responsibilities: Strategic Leadership Develop and execute the national Building Automation service strategy aligned with Bosch BT NA’s business objectives and customer expectations.Support a diverse team of service professionals, including managers, sales personnel (aligned to Service Sales Strategy), technicians, and support staff.Lead the Building Automation service roadmap, market shifts, and competitive opportunities while staying aligned with customer needs.Build and champion a service-first mindset, partnering with branch leaders to drive consistent culture and operational excellence.Drive alignment across branches and acquired companies through M&A integration, standardization, and cultural adoption. Customer Relationship Management Serve as a key escalation point for complex BAS technical issues, supporting branch and field teams to strengthen customer trust.Support national and local teams in customer meetings to expand Bosch BT NA footprint and maintain high satisfaction levels.Engage and support service leadership in meeting commitments for high priority and national accounts.Promote a culture of responsiveness, accountability, and customer advocacy. Service Delivery Optimization and Operational Excellence Influence performance outcomes for the Building Automation domain, including but not limited to; service agreement execution, renewal retention and performance, margin improvement, and broader KPI achievement.Establish SOPs for field services, including Service Agreement processes and Time & Material workflows.Evaluate, implement, and optimize tools, processes, service playbooks, and domain-specific standards that drive consistency and quality.Partner closely with branch teams to ensure consistent BAS service delivery, operational best practices, and continuous improvement. Technical & Market Expertise Maintain deep expertise in Building Automation systems, including controls architectures, integration protocols, HVAC fundamentals, analytics tools, and connected building ecosystems.Incorporate competitive intelligence and market trends into strategic and operational initiatives.Identify emerging customer needs and future service offerings to support Bosch BT NA’s growth trajectory.Support sales and service teams in strategic account reviews, customer meetings, and service‑centric solution development. Performance & Financial Metrics Drive Building Automation domain service performance outcomes by influencing revenue growth, margin improvement, service agreement execution, and operational efficiency across all support branches.Monitor and interpret key financial indicators, including labor utilization, agreement profitability, cost drivers, backlog health, and forecast accuracy that provides insights and recommendations that guide branch and regional leaders toward improved financial results.Collaborate with branch leadership and Service Business Operations to identify performance gaps, provide root-cause analysis, and co-develop corrective action plans tied to measurable operational improvement and financial uplift.Contribute to forecasting and planning through data‑driven insights on labor capacity, service demand, domain growth opportunities, and operational risks impacting financial performance. Cross-functional Collaboration Partner with the Digital Service Center (DSC) to enhance digital tool usage, drive adoption, and strengthen field enablement within Building Automation specific workflows.Collaborate with Service Business Operations to ensure Building Automation alignment on pricing strategies, service agreement estimation, ERP process compliance, and operational standards.Support M&A activities by evaluating Building Automation capabilities, aligning service playbooks, and accelerating operational adoption in newly acquired organizations. Health and Safety Compliance Ensure all service activities adhere to health, safety, and environmental regulations. Supervisor Duties: In accordance with applicable Company policies/procedures and Federal/State laws, will perform the following supervisory responsibilities: planning, assigning, and directing work; coaching and appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Professional CompetenciesResilience: Ability to maintain composure and adapt swiftly amidst uncertainty and rapid changes.Strategic Agility: Capacity to analyze situations critically and make prompt, well-informed decisions, considering diverse scenarios and potential outcomes.Entrepreneurial Mindset: Willingness to take calculated risks and explore innovative solutions to drive growth and capitalize on opportunities.Collaborative Leadership: Skill in fostering collaboration and teamwork across diverse stakeholders and departments to achieve common objectives.Resourcefulness: Ability to effectively leverage available resources, networks, and expertise to address challenges and capitalize on synergies.Attention to Detail: Capability to manage intricate details and nuances, ensuring thorough planning and execution of strategic initiatives.Emotional Intelligence: Aptitude in understanding and managing emotions to navigate sensitive situations, negotiate effectively, and build strong relationships.Adaptability: Willingness and ability to adjust strategies and approaches in response to evolving market dynamics, regulatory requirements, or unexpected developments.Clear Communication: Strong communication skills to articulate complex ideas, influence stakeholders, and navigate challenging conversations.Ethical Integrity: Commitment to upholding high ethical standards and integrity, ensuring transparency and compliance with regulations and corporate governance principles. Required Qualifications: 8–10 years of leadership experience in service operations and/or service sales, including oversight of service delivery for building automation, fire & life safety, and security systems.Demonstrated experience managing or directing field service teams and service project execution within (BAS)Knowledge of industry-specific regulations, legislative standards, and best operational practicesExperience in preparing, administering, and analyzing department budgets.A valid Driver’s License and ability to pass pre-employment screens Preferred Qualifications:Bachelor’s degree in business, engineering, or a relevant technical field Previous and progressive experience in Service/Operational leadership within a specific domain (BAS)Experience developing and implementing national service standards, including SOPs, domain specific service playbooks, and process guidelinesStrong background in service business growth strategy, including market/competitive analysisAbility to collaborate cross functionally with sales, operations, and field teams to drive service initiativesHarmonization of Service Departments through Merger & Acquisition activity Experience with Microsoft Dynamics 365 or similar ERP / Service Operations platforms Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to effectively communicate in English, (ie see, hear, speak and write clearly) in order to communicate with colleagues and/or customers Manual dexterity required for occasional reaching, lifting of light office objects, and operating office equipment Sitting, standing, walking in office environments and construction sites The employee must occasionally lift and/or move up to 50 pounds and may be required to work at heights over 1.8m (6 feet) Working Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. The office is clean, orderly, properly lighted and ventilated. Noise levels are considered low to moderate Will be required to be on site with customers or contractors, with or without colleagues to manage the expectations and deliverables. Sites range from general office environments to new construction. Driving to customer sites is required Limited overnight travel may be required Additional Information: Compensation: $135,000 - $180,000 (DOE) Working Hours: This position generally works Monday - Friday, overtime and on call when necessaryTravel Requirements: 30-40% Bosch Discounts: As an associate of Bosch, you will have access to various discount programs at Bosch Benefits: MedicalDentalVisionFlexible Spending Accounts401K w/ company matchLife/AD&D/LTDPaid Vacation/Sick/HolidaysEmployee Assistance ProgramPet Insurance Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable AccommodationsIf you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job DescriptionDescription: Blend Air Mechanical, has been serving Rockland County with expert plumbing, heating, and cooling since 1984. We are looking for a Full Time Senior Plumber for our Nanuet, NY location. This offers a competitive hourly rate + sign on bonus + benefits mentioned below. Blend Air Mechanical, is part of Encon Heating & AC company. Plumbing services, include, but not limited to: Kitchen Repairs, Bathroom Repairs, Gas Line Repairs, Waterline Repairs and Installations, Water Heater Repairs and Installations (Standard and Tankless), Tub Installation, Shower Installation, Toilet Installation, Faucet Installation, Leak Repairs, and Pool Heater Repairs. Apply today and grow with us! Specific Responsibilities: • Perform plumbing repairs and installations, including kitchens, bathrooms, gas lines, and waterlines., • Install and repair water heaters (standard and tankless)., • Handle tub, shower, toilet, and faucet installations., • Diagnose and repair leaks and plumbing issues., • Repair and maintain pool heating systems., • Ensure all work complies with local plumbing codes and safety standards., • Provide excellent customer service and communicate effectively with clients., • Maintain a clean and organized work area., • Accurately document work performed and report issues as needed., • Stay updated on industry best practices and new technologies. Requirements: Required Skills and Experience: • 5 years or more servicing plumbing equipment, • High School Diploma, • Ability to operate a computer and assigned software (including email), • Knowledge of normal safety practices pertaining to the trade., • Exceptional customer service skills, • Professional attitude with strong interpersonal skills, self-motivated, flexible and team player, • Good communication skills; written and verbal, • Positive attitude with good organizational skills. Ability to organize and prioritize tasks Eligibility Requirements: • Valid drivers license., • Employment/education will be verified., • Applicants must be currently authorized to work in the United States on a full-time basis, • Blend Air is a drug free workplace and requires post-offer pre-employment drug testing. Physical Requirements: • Ability to lift and carry up to 50 lbs regularly and up to 100 lbs occasionally., • Frequent standing, bending, kneeling, and climbing., • Ability to work in confined spaces and at various heights., • Comfortable working in varying temperatures and weather conditions., • Manual dexterity to handle tools and small parts., • Ability to operate power tools and heavy equipment safely., • Strong hand-eye coordination and balance., • Quarterly discretionary bonus, • Company Van + Gas for eligible technicians, • Career Growth Opportunities;, • Paid Training;, • Medical, Dental, and Vision Insurance;, • Health Savings Account (HSA); Health Flexible Spending Account (FSA); Dependent Care Flexible Spending Account (DFSA);, • 401K Savings Plan, • Life/AD&D Insurance (company provided as well as voluntary coverage available);, • Voluntary Short and Long-Term Disability;, • Employee Assistance Program;, • Paid Time Off, • Sick Time Off, • Accident Plan Insurance; Critical Illness CT LIC # HTG-0386317-S1 Putnam NY LIC# 31097 Westchester NY LIC # WC-33774-H21 MEC # 1093 AA/EOE #EN