Manual testing jobs in St Louis, MissouriCreate job alerts

At Bethesda, more than 1,200 employees dedicate their careers to improving the lives of others. As a team member at Bethesda, you'll enjoy great benefits such as: 403b, daily pay, bonuses, career advancement opportunities, and holiday pay. Medical, dental, vision, prescription, and life insurance available for regular status full and part time employees. Develops and implements a Corporate-approved orientation program for all employees with emphasis on regulatory issues surrounding long term care (LTC) and Bethesda values and mission. Conducts General Orientation using Corporate guidelines incorporating relevant OSHA and Federal and State regulations into the program. Incorporates staff and resident safety (i.e., emergency preparedness, fire safety, security, injury prevention), and the teaching program for those staff dealing directly and indirectly with the Alzheimer resident. Coordinates and monitors orientation activities throughout orientation. Provides input into evaluation of the orientee and recommends release from or extension of orientation based on evaluation of learning needs. Assists with mentor programs. Promotes a culture of staff development by being open and encouraging about the work environment. Develops lesson plans and conducts in-service programs including mandatory in-services. Other programs are identified by needs assessment of the staff, results of State surveys, introduction of new products, services and technology. In-services new and revised policies and procedures. All onsite programs are given in sufficient number and at sufficient times to meet the needs of the staff. Teach staff basic computer skills as related to their job duties. Properly instruct staff how to access and use the online education programs as a part of the overall in-service education program. Works closely with the Director of Nursing (DON) particularly in the promotion of teamwork and quality care issues. Provides input into the appraisal process of staff, particularly during orientation. Acts as a resource for Managers relative to the department’s orientation, in-service and staff development needs. As requested, conducts the state-approved Nurse Assistant Training Program or CMT program using the directions as set forth in state regulations. Classes are organized, students are monitored, and an acceptable fail/pass ratio is achieved. Acts as a resource person for the nurse assistants and monitors their progress. Develops and implements an ongoing infection prevention and control program to prevent, recognize, and control the onset and spread of infections in order to provide a safe, sanitary, and comfortable environment. Establishes facility-wide systems for the prevention, identification, reporting, investigation, and control of infections and communicable diseases of residents, staff, and visitors. Develops and implements written policies and procedures in accordance with current standards of practice and recognized guidelines for infection prevention and control. Oversees the facility’s antibiotic stewardship program. Oversees resident care activities that increase risk of infection (i.e., use and care of urinary catheters, wound care, incontinence care, skin care, point-of-care blood testing, and medication injections). Leads the facility’s Infection and Prevention Control Committee. Develops action plans to address opportunities for improvement. Participates on the facility’s QAA Committee. Implements an annual infection control risk assessment process and participates in the facility’s annual assessment review process. Reviews and/or revises the facility’s infection prevention and control program, its standards, policies, and procedures annually and as needed for changes to the facility assessment to ensure they are effective and in accordance with current standards of practice for preventing and controlling infections. Provides education to staff, residents, and families (where appropriate). Ensures public health is notified of reportable diseases. Collaborates with other departments in fulfilling requirements related to occupational health and safety. (I.e. employee health). Maintains documentation of infection prevention and control program activities. Informs the DON of the individual needs of the Staff Development functions as it relates to budgeting. Assists the DON in the assessment of needs for resident care equipment during budget preparation. Is aware of and promotes the compliance program throughout the facility. Participates in the continuous quality improvement (QAPI) activities established by the organization by looking at all resident care processes with an intent to identify areas for improvement. Prepares concise and timely QAPI reports, as required. Develops educational programs based on needs identified through QAPI activities, attends various meetings and provides reports as requested. Attends local professional educator’s meetings and Bethesda monthly meetings. Sets individual goals and reviews with the DON. Serves as a role model to the staff. Actively pursues education related to job. Keeps current in nursing issues (geriatrics, management, legislative.) May be assigned other duties as appropriate. • Graduate of an accredited school of Nursing, • BSN or related baccalaureate preparation in education preferred, • Current RN license in the state that you will be working, • CPR/AED certification required or willing to obtain within six months of employment, • Certified as a CPR instructor is high desirable, • Certified as an Instructor for the Missouri Nurse Assistant Training program and CMT instructor certification preferred, • Completed specialized training in infection prevention and control through accredited continuing education, • Minimum of five years of recent clinical nursing experience required, • Educational and supervisory/management experience preferred, • Previous experience in long-term care required, • Ability to manage time and organize daily schedule to meet productivity standards, • Computer skills including Microsoft Office Suite and other programs such as EMR, • Possesses integrity, initiative, and loyalty, • Must possess good communication skills and demonstrates ability to teach adults, • Ability to stand and walk for long periods of time, • Ability to lift heavy objects using proper lifting techniques and with assistance as necessary, • Ability to transfer and move residents who vary with ability to assist weighing 200+lbs using proper lifting techniques and with assistance as necessary, • Ability to push and pull equipment weighing in excess of 40lbs using proper techniques and with assistance as necessary, • Manual dexterity, coordination and skillful use of hands when working with residents and equipment, • Ability to perform necessary documentation, • Visual acuity, • Must be able to manage a diversity of activities, • Good organization, critical thinking, problem solving, and mentoring skills, • High degree of ability in using tact, diplomacy and discretion, • Must be able to concentrate with frequent interruptions and multiple distractions, • A preference for understanding and responding to the physical and psychosocial needs of the geriatric population required Pay range: $63,943 - $106,407 annually Category: RN

St. Louis, MO – Seeking Registered Nurse Join our team as a Registered Nurse, where we are focused on outpacing aging through a physician-guided, personalized approach to wellness. In this role, you will assess, plan, implement, evaluate, and interact with patients to provide and coordinate healthcare services and elevate patient experience. If you’re passionate about wellness and want to make a meaningful impact on people’s lives, we’d love for you to join our team. The Opportunity • Understanding of the concept of patient-centered care and knowledge of team-based care and evidence-based clinical practice guidelines., • Independently assess, evaluate, and interpret clinical information and care planning., • Collaborate with the Medical Director and/or Advanced Practice Provider to provide exceptional care, assisting during exams, diagnostic testing, and treatments., • Perform appropriate treatments as ordered by physician including injections, IV hydration, and performing point-of-care testing, in accordance with licensure, in an accurate and timely manner., • Prepare, administer, and record prescribed medications. Report adverse reactions to medications/treatments in accordance with the policy., • Document and record all care information concisely, accurately, and completely in a timely manner., • Maintain accurate and continued nursing documentation including patient histories, conditions, treatments, responses, pain management, and assessment of changes., • Reviewing visit summaries and home care instructions with patients including prescriptions provided and work or school notes as well as follow-up care., • Call patients with lab and test results; follow up with patients with abnormal test results., • Provide Case Management for patients that require referrals or follow up., • Provide individualized patient/family education customized to the patient and family members., • Maintain a clean, sanitary, and organized work environment., • Maintain established policies and procedures, objectives, performance improvement program, safety, environmental, and infection control standards., • Abide by all state rules and regulations., • Conduct self in a composed and professional manner., • Attend all required training and continuing education events., • Welcome members and guests into the facility, ensuring their first interactions are warm, genuine, and efficient., • Answer patient and client inquiries in a timely and polite manner; respond to inquiry or direct the caller to appropriate personnel while entering appropriate clerical notation into the documentation record (EHR, patient relationship manager, or booking software)., • Assist in answering phones and taking accurate messages as needed., • Assist in directing clients to rooms and coordinating services such as WBC, Infrared Sauna, Cold Plunge, Compression, etc. Communicate in a courteous, professional, cooperative, and mature manner., • Maintain nursing supply inventory by checking stock to determine inventory levels; anticipating needed supplies; communicating with manager to place supply order., • Ensure operation of equipment by completing preventive maintenance requirements, following manufacturer’s instructions, troubleshooting malfunctions, calling for repairs., • Complete required facility and OSHA safety rules and procedures while on assignment., • Uphold HIPAA regulations., • Assist in daily studio operations including opening and closing the studio and maintaining a facility that is cared for and enticing. Required Experience and Competencies • Associate Degree in Nursing required., • Current active Registered Nurse (RN) license in good standing in the state of practice required., • Current CPR Certification required., • Bachelor’s degree in nursing preferred., • 1-2 years of nursing experience in an urgent care, primary care, or medical/health spa setting preferred., • Experience with electronic health record system preferred., • Knowledge of clinical compliance., • Strong clinical assessment and critical thinking skills., • Solid understanding of office procedures., • Excellent time management skills and the ability to multi-task to prioritize work., • Excellent customer service skills., • Excellent verbal and written communications skills., • Team oriented and productivity driven., • Ability to communicate clearly and professionally, verbally and in writing., • Ability to follow facility and OSHA safety rules and procedures., • Ability to uphold HIPAA regulations., • Ability to follow Privacy Policies regarding PHI and HIPAA set forth in the Privacy Policy Manual., • Punctual and dependable for assigned/confirmed shifts., • Familiar with charting in an electronic health record., • Ability to work well with a multidisciplinary team., • Ability to work independently, be attentive to detail, and maintain a positive attitude., • Ability to problem solve and be self-motivated., • Commitment to excellence and high standards., • Versatile, flexible, and willing to work within constantly changing priorities with enthusiasm., • Able to operate computer software with training., • Strong interpersonal skills and able to understand and follow written and verbal instructions., • Ability to deal effectively with diverse individuals at all organizational levels and with external customers., • Proficient in all MOOV Health & Wellness equipment, services, and treatment modalities. The Practice MOOV Health and Wellness At MOOV, we believe that aging doesn’t have to mean slowing down. Our focus is helping individuals outpace aging by embracing a proactive approach to their health. Through a personal, pioneering, and physician-led approach, we offer solutions that promote physical, mental and emotional well-being, unlocking each member’s full potential. The Community • St. Louis, Missouri, is a dynamic city with a rich history and diverse culture, making it an incredible place to work and live., • Located along the Mississippi River, it’s home to iconic landmarks like the Gateway Arch, symbolizing westward expansion, and Forest Park, one of the largest urban parks in the U.S., • Residents enjoy free attractions like the St. Louis Zoo, Art Museum, and Science Center., • The city is renowned for its vibrant music scene, unique neighborhoods, and culinary specialties like toasted ravioli and St. Louis-style BBQ., • St. Louis experiences all four seasons, with hot summers and snowy winters., • Known as a sports hub, it’s home to the Cardinals (MLB) and Blues (NHL)., • With its affordable cost of living, strong job market, and cultural vibrancy, St. Louis offers an appealing blend of opportunity and charm. Benefits & Beyond* MOOV cares about the whole you. With our comprehensive compensation and benefits package, we are mindful of what matters most, and support your needs of today and your plans for the future. • Superior health plan options., • Medical, dental, vision, HSA/FSA, life coverage, and more., • 401(k) retirement savings plans., • Generous paid time off., • Voluntary benefits and family planning support., • Professional and career development programs., • Employee Assistance Program (EAP)., • Wellness program., • Commuter benefits., • Student loan refinancing discounts. *Benefits for part-time and per diem vary. Please speak to a recruiter for more information. MOOV does not discriminate against any person on the basis of race, creed, color, religion, gender, sexual orientation, gender identity/expression, national origin, disability, age, genetic information (including family medical history), veteran status, marital status, pregnancy or related condition, or any other basis protected by law. MOOV is committed to complying with all applicable national, state and local laws pertaining to nondiscrimination and equal opportunity. Applicants only. No agencies please.

Date Posted: 2026-02-12 Country: United States of America Location: US-IA-CEDAR RAPIDS-137 ~ 855 35Th St NE ~ BLDG 137 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required on day 1 We’re looking for a Principal Software Test Engineer to join our team in Cedar Rapids, IA, and take a leading role in shaping the future of military communications. At Collins Aerospace, our Communication Systems directorate delivers some of the most advanced solutions in the industry—technology that keeps military personnel safe, connected, and mission-ready. In this role, you’ll lead the testing and validation of next-generation systems powering UAVs, fighter jets, aircraft carriers, and ground vehicles. From advanced satellite communications and cryptography to cutting-edge embedded computing architectures, you’ll ensure our solutions meet the highest standards for speed, security, and resilience. If you’re ready to bring your expertise to the forefront and guide critical testing efforts that impact mission success, this is the role for you. What You Will Do: * Design, create, and integrate the software components of hardware test stations for factory and engineering labs which include: * Work hands on, with test hardware equipment to develop software which tests military communication hardware products during the build and manufacturing process * Analyze and understand requirements to ensure testability * Develop clear and concise test objectives that guide the testing process and ensure comprehensive coverage * Write software for both manual and automated test cases, with an objective to detect manufacturing defects, improve product quality and increase manufacturing yields * Analyze test results for failures and discrepancies * Work closely with other test engineers and product developers to verify product hardware is built correctly * Coordinate and collaborate with Systems, Electrical and Mechanical engineering disciplines * Help manage work across multiple programs * Mentor, lead, and review work for lower-level engineers Qualifications You Must Have: * Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and minimum 8 years prior relevant experience or an Advanced Degree in a related field and minimum 5 years of experience * Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance * 3+ years experience programming in C# and Python languages * 3+ years Experience with manual use or automation of test equipment such as oscilloscopes, network analyzers, digital multimeters, and other equipment * 3+ years Experience in validation, verification, testing, and requirements analysis * Prior experience leading and managing projects Qualifications We Prefer: * Strong communication, analytical, and problem-solving skills * Experience with SCPI commands, bug tracking, and test management tools * Knowledge of software testing methods (functional, integration, regression, performance) * Proficiency with Git/Subversion, Atlassian tools, and Agile (SAFe) environments * Background in networking (TCP, UDP, Telnet) and embedded protocols (I2C, SPI, UART) * Experience with Linux development and multi-threaded applications in C, C++, or Java * High attention to detail with a track record of delivering quality results What We Offer: * Medical, dental, and vision insurance * Three weeks of vacation for newly hired employees * Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option * Tuition reimbursement program * Student Loan Repayment Program * Life insurance and disability coverage * Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection * Birth, adoption, parental leave benefits * Ovia Health, fertility, and family planning * Adoption Assistance * Autism Benefit * Employee Assistance Plan, including up to 10 free counseling sessions * Healthy You Incentives, wellness rewards program * Doctor on Demand, virtual doctor visits * Bright Horizons, child and elder care services * Teladoc Medical Experts, second opinion program * And more! Relocation Eligibility * Eligible for relocation Learn More & Apply Now! Do you want to be a part of something bigger? A team whose impact stretches across the world, and even beyond? At Collins Aerospace, our Mission Systems team helps civilian, military and government customers complete their most complex missions — whatever and wherever they may be. Our customers depend on us for intelligent and secure communications, missionized systems for specialized aircraft and spacecraft and collaborative space solutions. By joining our team, you’ll have your own critical part to play in ensuring our customer succeeds today while anticipating their needs for tomorrow. Are you up for the challenge? Join our mission today. • Please consider the following role type definitions as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form – with our customers and with each other – propel us all higher, again and again. Apply now and be part of the team that’s redefining aerospace, every day. Employee Referral Eligible As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Job Description The General Manager leads the team responsible for all operational and financial activities of a large/iconic/complex asset or collection of assets, typically with PM or SPM direct reports in the Clayton area. Essential Duties and Responsibilities: • Foster positive relationship with client, tenants and vendors, • Respond to tenant needs, ensuring that administrative and building technical staff resolve problems promptly; ensure services are provided in compliance with policies, procedures, regulations, and contractual obligations and standards; coordinate tenant move-ins and move-outs, and "walk-through" spaces with tenants and tenant improvement department; maintain vacant spaces in "tour ready" condition; ensure teams assigned to tenant onboarding activities properly document and communicate with tenants timely and appropriately; follow up with tenants to ensure a successful transition., • Direct, review, and approve vendor invoice payments and other accounting related activities following the terms of the management agreement, LPC policies, and property management approval authorization limits., • Direct and control preparation and delivery of timely, accurate, and insightful monthly reports as well as annual operating and capital budgets/expenses; prepare and submit tenant rent and Common Area Maintenance (CAM) or Escalation (OpX) recovery charges to client., • Coordinate and oversee all aspects of construction projects to ensure timely and accurate completion., • Maintain oversight of contracted terms that impact the financial performance of the asset/company; report on expirations, covenants, restrictions and other encumbrances that drive decision making and asset value., • Coordinate all lease administration activities with lease administrator and accounting; review all lease set ups, lease changes, reporting, etc. and provide final approval., • Direct sourcing and procurement activities to effect optimal operations; deliver detailed bid analysis and recommendations to clients that drive value; manage quality of vendor service delivery to ensure contract compliance and desired value., • Proactively collect rent and other charges in accordance with lease terms and report status of AR to client(s) with recommendations for action; prepare client approved standard legal notices., • Ensure that at least monthly property inspections are performed; recommend and/or approve alterations, maintenance, and reconditioning; contract for, and coordinate, vendors., • Document plans and preparations for emergency response; ensure resources, supplies, and backups are in place to effectively recover from adverse events; coordinate drills and other required training., • Produce well-written reports, business correspondence and procedure manuals., • Coordinate and lead daily and long-term activities of the team; establish work schedules, assign tasks, and cross-train staff; establish and track deadlines to meet client and company objectives; elevate team performance through subject matter expertise and suggestions to improve systems, processes, and procedures; provide formal coaching, mentoring, supervision, and guidance; recruit and hire new team members; monitor training and development of staff; develop and deliver performance reviews., • Act as primary contact with property owners, serving as Owner Representative to ensure objectives are being met., • Promote collaboration among the various property support teams (accounting/leasing/construction), • Bachelor's Degree (BA/BS) preferred with 5 - 8 years of relevant experience or a combination of education and experience; commercial office, retail, and/or industrial property management experience required, • Real Estate License required where mandatory by local regulation, and CPM (Certified Property Manager) or RPA (Real Property Administrator) professional designation or candidacy preferred, • Intermediate to advanced skills with Microsoft Office Suite, including Microsoft Excel required; knowledge of MRI and Kardin preferred, • Working knowledge of leases, contracts, financial instruments, tax laws, and construction required, • Excellent written and verbal communication skills; ability to clearly and effectively convey complex topics with a positive tone to achieve operational and relationship objectives, • Strong interpersonal skills; ability to lead the exchange of sensitive, complicated, and difficult information; convey performance expectations; and effectively handle problems, • Advanced knowledge of financial terms and principles required; ability to forecast outcomes, prepare budgets with long-term capital plans, and deliver insightful variance reports; ability to prepare and make recommendations on financial/business analysis including cost/benefit propositions, ROI analysis, and other complex reports required, • Strong organizational skills that deliver timely results and influence the productivity of the team; inquisitive and entrepreneurial mindset, • Ability to comprehend, analyze, and interpret complex documents and skill to solve problems involving several options; advanced analytical and quantitative skills required, • Leadership experience and skills to empower team to achieve a broad range of client and company objectives, • Proven track record for delivering excellent internal and external customer service; ability to successfully interact/communicate with tenants/vendors/contractors as well as teammates and leadership team, • Ability to travel daily to assigned properties as necessary, • Ability to work after hours, weekends, holidays, and during emergency situations to meet the needs of the client, • Ability to read and write English in order to understand manuals and procedures, and to write reports Physical Requirements: Ability to sit/stand/walk for long periods of time; manual dexterity to operate a computer keyboard, phone, and other office equipment; eyesight that allows for reading a computer screen, phone screen, reports, etc.; hearing that allows for hearing/understanding spoken words; lifting and carrying up to 20 lbs. NOTE: Some, but not all, of our positions may have an additional requirement to comply with COVID-19 health and safety protocols, including COVID-19 vaccination proof and/or rigorous testing. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionDescription: Purpose: A custodian, or janitor, is responsible for cleaning, and maintaining the health and safety standards of, a residential or commercial building. He may also be required to make basic repairs to the facility. He typically works alone. However, cameras are operating 24 hours a day and are located in every aspect of the building. Responsibilities: • Maintains inventory by submitting a written report/request of the supplies and possible testing of new supplies of the equipment., • Keeps entire building clean at all times using only required cleaners following the Area, Product and Procedure method for each area as stated in this job description., • Responds to service requests requesting the setup of furniture for community events organized by the company., • Uses gloves and masks to clean with cleaning products at all times, • Chemicals and equipment approved and required by TCI listed in job description and checklists, • Cleans all hazardous waste promptly and effectively utilizing proper procedure., • Uses a clipboard at all times to check off daily tasks as completed., • All other duties as requested by management to improve the appearance of the facility. Requirements: Professional Requirements: Custodians are expected to have a various number of skills and abilities rather than educational qualifications. It is these skills which would help him to perform his duties as part of his profession helping the candidate to grow to higher levels and also in terms of remuneration package. Following are the skills and abilities required to be a custodian: • Ability to withstand long working hours: Custodians must be willingly perform unpleasant cleaning tasks by spending long hours standing, lifting and pushing heavy power equipment in addition to bending and squatting. They must develop the ability to work in a noisy environment around equipment as well., • Ability to work in a team: These professionals work coordinating with various other departments of the organization. They should have the ability to work cooperating relationships with other professional by demonstrating sensitivity and respect in a diverse population., • Ability to work with hazardous materials: Custodians must have considerate knowledge while working with pesticides as they are hazardous materials. They should be able to identify on how to use dangerous chemicals by safely disposing them off with the help of manual or power equipment., • Organizational Skills: These professionals are vested with a number of tasks which may be maintenance or supervision activities. As such, they should have the ability to properly schedule their activities by prioritizing their duty according to the importance of the task. They should effectively and smoothly complete their duties within the allocated time., • Reasonable knowledge of maintenance and preserving variety chemical substances., • Ability to work under supervision., • Ability to make decisions and problem solving skills., • Effective verbal and written communication skills., • Physical Effort: Mental/visual stress related to viewing of computer screens and printed material for prolonged periods. Lifting limited to a box of forms weighing 7-8 pounds. Prolonged periods of sitting. May experience stress related to productivity requirements., • Work Environment: Normal office environment with limited exposure to health or accident hazards. Note: We are a therapeutic residential treatment facility and at times, it can be noisy and stressful. This position has no interactions with youth., • Equipment Used: Computer, telephone, printer, calculator, fax machine, and copy reproduction equipment, • At TCI, we have a positive, family oriented working approach while treating each other with respect. Physical Elements Required: • Lifting and carrying 5-7 pounds, be without physical limitation that would impair ability to fulfill the functions of the position. Must have sufficient mobility, physical stamina to travel all over facility and to participate in a therapeutic crisis intervention full, prone restraint., • Frequent bending, stooping kneeling, and reaching, stretching;, • Standing for long periods of time;, • Work requires the ability to work both indoors and outdoors Mental Performing Elements • Must be without emotional limitations that would impair ability to fulfill the functions of this job including freedom from substance abuse., • Organizing and coordinating schedules and events in an organized manner, • Ability to maintain a calm demeanor, • Ability to work within a closed environment, • Ability to focus and maintain decorum

Job DescriptionOur client provides a broad and growing portfolio of worldwide technical services in MRO (maintenance, repair, and overhaul), Engineering, Component Repair, and Parts Development. They support narrow and wide-body aircraft operators in the commercial and government aviation markets. Since its founding in 1970, they have received numerous industry awards for its support of turn-key fleet transition and integration, aircraft modifications, aircraft heavy maintenance, design services, and component repair of accessories, structures, flight control surfaces, fuel components, complex composites, hydraulics, pneumatics, heat exchangers and electrical components. They are currently recruiting for a Manager, Aircraft Maintenance in Kansas City, MO. What Is In It For You Salary: $92,000 - $130,000 + including potential bonuses (Recruiting and Incentive Programs) Position Type: Permanent - Full-time Benefits: Medical, Dental, 401K, Disability, Company-provided Life Insurance A Day in the Life of The Manager, Aircraft Maintenance As the Aircraft Maintenance Manager, you will manage assigned aircraft maintenance lines using production schedules, labor analysis, and budgetary information. Utilizes resources to manage entire aircraft maintenance, preventative maintenance, or alteration projects. Oversees product quality while ensuring maintenance tasks and functions are carried out in compliance with the applicable requirements of the air carrier maintenance program and its inspection procedures manual. Essential Duties of The Manager, Aircraft Maintenance • Ensures the direction of maintenance programs is consistent with the company goals and targets., • Directly responsible for oversight of the Aircraft Maintenance program., • Coordinates with Quality Control to ensure, within company repair station limitations, that aircraft maintenance is performed and carried out in accordance with approved Federal Aviation, manufacturers, customers, and company procedures and requirements., • Reviews customer program and FAA regulations to ensure compliance., • Manages the overall maintenance, preventative maintenance, or alteration of, approves, and returns to service any aircraft or part thereof., • Ensures communication of all significant information, including work, risk, safety, and quality.Education and Experience:, • Bachelor’s degree in a related field preferred., • Minimum of five (5) years’ recent commercial aircraft maintenance and/or MRO experience required., • Minimum of three (3) years of aircraft maintenance supervisory experience is required. While performing the duties of this job, the employee will be required to sit, stand, and walk; use their hands and arms; talk or hear; and focus on objects close up. The employee may be required to lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Compensation This position's full base pay range is $92,000-$138,000 annually, exclusive of benefits or potential bonuses. The lower end of the range represents the target base pay for those beginning or developing in the role. The higher end of the range is intended for those who have mastered the role, with proven significant expertise, high achievement, and specialized skills. If you are hired, your salary will be based on factors including skills, education, and experience. In addition to those factors – we consider the internal equity of our current employees when determining offers. This position is eligible for an annual bonus. We also offer a generous benefits package, as detailed below. Benefits The company offers employees a wide range of benefit options to support their families' health and financial security. Health: To give employees the flexibility to select the coverage that best meets their family’s needs, the company offers a choice of comprehensive medical/pharmacy plans, dental and vision plans, health and dependent care flexible spending accounts, and voluntary benefits, including accident and critical illness. Financial: The company 401(k) plan includes employer matching contributions and various investment options to help employees reach their financial goals. Employees also have access to financial advisors at no cost for personalized, professional, licensed assistance. The company provides company-paid life and disability insurance, with an option to purchase more. Other available benefits include legal services and discounted home and pet insurance. Time-Off: The company supports employee work-life balance by providing paid time off (PTO), paid holidays, and parental leave. PTO accruals start at 80 hours annually, and employees receive 64 hours of holiday leave throughout the year. Incentive Program: Company employees are eligible for an incentive plan based on their role within the organization. Tuition/License Assistance: The company offers a generous tuition reimbursement program, including Aviation Maintenance Technology (AMT) student loan repayment, Airframe/Powerplant (A&P) certification (coursework and/or testing), and business-related degrees. Employee Assistance Program: The company makes access to support easy for our employees and their families through our Employee Assistance Program, with confidential 24/7 counseling and referrals for help with life's challenges. Discounts: The company has partnered with local and national vendors to provide employees with discounts on entertainment, mobile phones and services, computer hardware and software, gym memberships, rental cars, and more. Career Development: The company Academy programs offer technical skills and leadership training opportunities for those looking to add skills to their technical toolbox or move into a leadership role. Our Apprenticeship Program offers robust on-the-job training for anyone looking to begin a career in aviation maintenance. If you are interested in the Manager, Aircraft Maintenance job in Kansas City, MO, apply today!

Job DescriptionDescription: Attention all Audiologists, we are calling on you to work with us providing S.P.R.I.N.T. testing and conducting exams for our Military Service members. We will primarily work weekends, with some occasional weekdays in the State of _________ on an "as need basis". We provide health readiness services to meet the medical and dental requirements to maintain a deployable military force for the following: • U.S. Army Reserve (USAR), • Army National Guard (ARNG), • U.S. Navy Reserve (USNR), • U.S. Marine Forces Reserve (MARFORRES), • U.S. Coast Guard Reserve (USCGR), • Air National Guard (ANG), • U.S. Air Force Reserve (USAFR) Responsibilities: • Audiologist will perform manual audiograms, evaluations, and run a SPRINT test., • All equipment is provided.Requirements:, • Au.D or Master’s Degree in Audiology from an accredited college or university, • Current and unrestricted state license in Audiology, • Experience with administering SPRINT tests - preferred, • Experience with MAICO and INTERACOUSTICS AA222 Audiometers - preferred, • Experience with Military and/or veteran health care - preferred, • Must have weekend availability Join our team, and become a part of a bridge for better health. If you are made a conditional offer of employment, you will be required to undergo background check (including criminal record check) and drug screening. We use E-Verify in our hiring process. DOCS Health is committed to ensuring equal employment opportunity. All employment decisions, policies, and practices are in accordance with applicable federal, state, and local anti-discrimination laws. DOCS Health will not engage in or tolerate unlawful discrimination (including any form of unlawful harassment) on account of a person's sex (including pregnancy), age, race, color, religion, national origin, ancestry, citizenship, physical or mental disability, sexual orientation, gender nonconformity, status as a transgender individual, gender identity, genetic information, marital status, family responsibility, armed services, or any other status protected by law.

Job Description Position: Chemical Operator II / III Location: Sauget, IL Salary Range: $25 – $45 per hour Job Description Crysalis Biosciences Inc. is seeking skilled chemical operators. Our chemical operators are responsible for the operation of our computer-controlled process equipment, manual machinery, evaluation of process problems that may arise, and documenting process parameters. In addition, you will be a vital part of the team to help ensure maximum production quantity and quality, while supporting the policies, goals, and objectives of the company. Key Responsibilities • Monitor and control plant operations., • Constantly reviewing the plant operations, control the processes, ensure quality product is produced, anticipate and solve problems, and help identify opportunities for improvement., • Participate in projects aimed at improving efficiency and reducing operating costs., • Maintain records of key production variables, including production volume, yield, plant uptime, and utility consumption., • Collaborate and effectively communicate with QA to ensure effective participation in QA programs related to sampling and testing process streams and products., • Ensure compliance with all standard operating procedures (SOPs) and safety protocols., • Coordinate with maintenance to ensure timely repair work by assisting in diagnosing and troubleshooting any maintenance issues., • Participate in safety, health, and environmental programs., • Maintain compliance with any applicable city, county, state, and federal regulations relating to operations. Chemical Operator II • High school diploma required; post-secondary education or technical trade certification is an asset., • Strong computer skills, including the ability to operate Distributed Control Systems (DCS); familiarity with standard office software is a plus., • Strong verbal and written communication skills., • Experience with process monitoring and control systems., • Knowledge of quality control analysis., • Strong critical thinking and problem-solving abilities., • Ability to ensure safe equipment operation., • Associate degree in Process Technology, Chemical Operations, or a related field preferred., • Experience in dry-mill ethanol plants and coproduct operations (e.g., DDGS, corn oil extraction)., • 5–7 years of experience in an ethanol production facility or similar process manufacturing environment preferred., • Exposure to heat, noise, moving machinery, chemicals, and elevated work areas., • Ability to lift or move up to 50 lbs. regularly., • Ability to climb ladders and work at heights up to 175 feet., • Must be able and willing to work safely, including the use of appropriate personal protective equipment (PPE).Company DescriptionBiomanufacturing facility intended for the production of low-carbon fuels and renewable industrial materials. The company transforms existing industrial infrastructure into advanced biorefineries that use sustainable biomass feedstock and microbial fermentation to produce ethanol and co-products such as biogenic CO2, distillers' grains, and protein-rich syrups, helping the energy and materials sectors move toward lower-emission, circular production systems.Biomanufacturing facility intended for the production of low-carbon fuels and renewable industrial materials. The company transforms existing industrial infrastructure into advanced biorefineries that use sustainable biomass feedstock and microbial fermentation to produce ethanol and co-products such as biogenic CO2, distillers' grains, and protein-rich syrups, helping the energy and materials sectors move toward lower-emission, circular production systems.

Job DescriptionOur client provides a broad and growing portfolio of worldwide technical services in MRO (maintenance, repair, and overhaul), Engineering, Component Repair, and Parts Development. They support narrow and wide-body aircraft operators in the commercial and government aviation markets. Since its founding in 1970, they have received numerous industry awards for its support of turn-key fleet transition and integration, aircraft modifications, aircraft heavy maintenance, design services, and component repair of accessories, structures, flight control surfaces, fuel components, complex composites, hydraulics, pneumatics, heat exchangers and electrical components. They are currently recruiting for a Manager, Aircraft Maintenance in Kansas City, MO. What Is In It For You Salary: $92,000 - $130,000 + including potential bonuses (Recruiting and Incentive Programs) Position Type: Permanent - Full-time Benefits: Medical, Dental, 401K, Disability, Company-provided Life Insurance A Day in the Life of The Manager, Aircraft Maintenance As the Aircraft Maintenance Manager, you will manage assigned aircraft maintenance lines using production schedules, labor analysis, and budgetary information. Utilizes resources to manage entire aircraft maintenance, preventative maintenance, or alteration projects. Oversees product quality while ensuring maintenance tasks and functions are carried out in compliance with the applicable requirements of the air carrier maintenance program and its inspection procedures manual. Essential Duties of The Manager, Aircraft Maintenance • Ensures the direction of maintenance programs is consistent with the company goals and targets., • Directly responsible for oversight of the Aircraft Maintenance program., • Coordinates with Quality Control to ensure, within company repair station limitations, that aircraft maintenance is performed and carried out in accordance with approved Federal Aviation, manufacturers, customers, and company procedures and requirements., • Reviews customer program and FAA regulations to ensure compliance., • Manages the overall maintenance, preventative maintenance, or alteration of, approves, and returns to service any aircraft or part thereof., • Ensures communication of all significant information, including work, risk, safety, and quality.Education and Experience:, • Bachelor’s degree in a related field preferred., • Minimum of five (5) years’ recent commercial aircraft maintenance and/or MRO experience required., • Minimum of three (3) years of aircraft maintenance supervisory experience is required. While performing the duties of this job, the employee will be required to sit, stand, and walk; use their hands and arms; talk or hear; and focus on objects close up. The employee may be required to lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Compensation This position's full base pay range is $92,000-$138,000 annually, exclusive of benefits or potential bonuses. The lower end of the range represents the target base pay for those beginning or developing in the role. The higher end of the range is intended for those who have mastered the role, with proven significant expertise, high achievement, and specialized skills. If you are hired, your salary will be based on factors including skills, education, and experience. In addition to those factors – we consider the internal equity of our current employees when determining offers. This position is eligible for an annual bonus. We also offer a generous benefits package, as detailed below. Benefits The company offers employees a wide range of benefit options to support their families' health and financial security. Health: To give employees the flexibility to select the coverage that best meets their family’s needs, the company offers a choice of comprehensive medical/pharmacy plans, dental and vision plans, health and dependent care flexible spending accounts, and voluntary benefits, including accident and critical illness. Financial: The company 401(k) plan includes employer matching contributions and various investment options to help employees reach their financial goals. Employees also have access to financial advisors at no cost for personalized, professional, licensed assistance. The company provides company-paid life and disability insurance, with an option to purchase more. Other available benefits include legal services and discounted home and pet insurance. Time-Off: The company supports employee work-life balance by providing paid time off (PTO), paid holidays, and parental leave. PTO accruals start at 80 hours annually, and employees receive 64 hours of holiday leave throughout the year. Incentive Program: Company employees are eligible for an incentive plan based on their role within the organization. Tuition/License Assistance: The company offers a generous tuition reimbursement program, including Aviation Maintenance Technology (AMT) student loan repayment, Airframe/Powerplant (A&P) certification (coursework and/or testing), and business-related degrees. Employee Assistance Program: The company makes access to support easy for our employees and their families through our Employee Assistance Program, with confidential 24/7 counseling and referrals for help with life's challenges. Discounts: The company has partnered with local and national vendors to provide employees with discounts on entertainment, mobile phones and services, computer hardware and software, gym memberships, rental cars, and more. Career Development: The company Academy programs offer technical skills and leadership training opportunities for those looking to add skills to their technical toolbox or move into a leadership role. Our Apprenticeship Program offers robust on-the-job training for anyone looking to begin a career in aviation maintenance. If you are interested in the Manager, Aircraft Maintenance job in Kansas City, MO, apply today!

Job DescriptionWe are seeking a highly skilled DevOps Engineer with a deep background in Linux systems administration. This role is a perfect fit for a seasoned sysadmin who is ready to transition into or expand their expertise in a DevOps methodology. You will be crucial in automating our infrastructure, migrating our on-prem Linux environments to the cloud, and building and maintaining development and production environments. A core focus of this role is on standing up and maintaining the specific toolsets and applications used by software engineers in the software development process. This is a full-time, on-site position based in St. Louis County, Missouri. This position has no on-call or pager duty requirements.What you will do: • Infrastructure Management & Automation: Design, implement, and maintain scalable and secure Linux-based infrastructure using Infrastructure as Code (IaC) tools like Terraform or Ansible. You will automate repetitive tasks, manage configuration, and ensure our systems are reliable and efficient. This includes downloading the Red Hat ISO, creating templates for new VMs, and making modifications for standard server needs, such as creating an Ansible user and setting nameservers. After VM deployment, you will manage configuration and hardware resources. Ansible will be used for most tasks, connecting to managed hosts via SSH keys and grouping them in an inventory file based on their role. You will run standard playbooks for base build tasks and customized playbooks based on server roles, utilizing GitLab for code updates when needed. You will also use Red Hat Satellite to manage repositories., • Developer Toolset and Application Administration: Administer, install, and upgrade servers and the applications that software engineers need to use, specifically those that are part of the software development process. This involves being responsible for standing up and tearing down complete development, testing, and production environments, provisioning servers, configuring network settings, and deploying applications and services. Examples of these applications include GitLab, Subversion, Bitbucket, Confluence, Jira, and Smartbear., • Linux System Migration: Lead the migration of our existing on-prem Linux servers and applications to a cloud platform (e.g., AWS, Azure, or GCP). This includes planning, execution, and validation to minimize downtime and ensure data integrity. While a few one-off physical servers use a hardened RHEL image, most of our environment is virtual/cloud., • CI/CD Pipeline Management: Collaborate with development teams to build and maintain robust Continuous Integration/Continuous Deployment (CI/CD) pipelines. You'll work with tools like Jenkins, GitLab CI, or CircleCI to automate software build, test, and deployment processes. While the primary focus is on maintaining tools, helping with pipeline creation may be a secondary or tertiary responsibility., • Monitoring & Troubleshooting: Implement and manage monitoring and logging solutions (e.g., Prometheus, Grafana, ELK stack) to proactively identify and resolve performance issues, system failures, and security vulnerabilities., • Security & Compliance: Ensure our Linux systems and infrastructure are secure by implementing best practices, managing user access, and conducting regular audits.What you will bring:, • Extensive Linux Experience: Minimum of 5 years of professional experience as a Linux Administrator or in a similar role. You should be an expert in the Linux command line, scripting (Bash, Python), and system-level troubleshooting. Experience with Red Hat Enterprise Linux and its associated activities, such as creating VM templates and managing OS-level infrastructure, is required., • DevOps Tooling: Hands-on experience with key DevOps tools, including version control systems (Git), IaC tools such as Ansible and Terraform, and CI/CD platforms. Proficiency with Ansible for server configuration and management, including playbook development and managing updates via GitLab, is essential., • Cloud Computing: Practical experience with at least one major cloud provider (AWS, Azure, or GCP), including a solid understanding of compute, storage, networking, and database services. Experience managing virtual/cloud environments is crucial., • Developer Toolset Maintenance: Proven experience in installing, upgrading, and administrating specific software development tools and applications. This includes, but is not limited to, GitLab, Confluence, Jira, Subversion, Bitbucket, or Smartbear., • Automation Skills: Proven ability to automate complex tasks and workflows. You should be passionate about eliminating manual work and improving efficiency., • Networking: Strong understanding of TCP/IP, DNS, DHCP, and firewalls., • Communication: Excellent communication and collaboration skills to work effectively with development, QA, and operations teams., • On-site Availability: This is an on-site position requiring a presence in the St. Louis Office.Bonus if you also bring:, • Experience with containerization technologies like Docker and orchestration platforms like Kubernetes., • Knowledge of scripting languages beyond Bash, such as Python or Ruby., • Familiarity with container security best practices.

Job Description QA Inspector – $1,500.00 Sign on Bonus (Payable after 3 months, 6 months, and one year in $500 increments) Full-Time Day and Night Shift available – 12 hour shifts – 3 days one week – 4 days the next week Job Summary Responsible for the startup inspection, in-process inspection and end of run testing of bottles. Must be able to audit and assist Inspector Packers with the visual inspection of bottles, report any quality problems and non-conformances to the Production and/or Quality Supervisor immediately. Must follow the Pretium standards for Safety, Housekeeping, Quality and Production in an efficient and safe manner. The incumbent is expected to be a self-starter, a good manager of time and be able to work independently. Maintains safe, secure, and healthy production environment by adhering to organization standards and policies, and to legal regulations, alerting others regarding potential concerns. Must be able to work 8 or 12-hours shifts, including working overtime and attending after-hour meetings as needed; may be asked to fill in for Supervisors if required. Essential Duties and Responsibilities • Performs first articles inspection after changeovers and line start-ups as stated in SOP/Work Procedure Manual approves finished products by confirming specifications; conducting visual and measurement tests., • Approves in-process production by confirming specifications; conducting visual and measurement tests; communicating required adjustments/actions to operator and supervisor, • Collect representative samples from each production line and perform the required test and/or evaluations to ensure that the product meets product specifications., • Contain nonconformance raw and finished product as stated in SOP/Work Procedure Manual., • Document all test and/or quality evaluations and abide by the various operational procedures as spelled out in the SOP/Work Procedure Manual., • Ensure that all testing equipment (Magna Mike, scales, etc.) are calibrated daily; calibration to be completed via us of a calibration gauge, weight or other equipment as needed and recorded on the required check sheet., • Creation of Labels as needed for each shift, line, and machine that is in production for that day., • Train on the responsibilities of the Inspector Packer role and be able to replace/backup and provide break coverage as needed., • Monitor and verify activities to ensure that line products coming in and out of the facility meet food safety standards in addition to quality standards., • Comply with all company food safety and quality assurance procedures to ensure all are always followed and documented correctly., • Report any product or process failures that could impact food safety of manufactured product to Quality. Education and Experience • High School Diploma or GED preferred., • 1-2 years of related experience and/or training preferred., • Experience in plastics or packaging industry a plus., • Working knowledge of computer operating systems. Safety and Housekeeping • Must wear all required PPE properly., • Conduct him/herself in a safe manner., • Must keep the area around your workstation clean and free from dirt and debris., • Clean assigned areas of the building or pieces of equipment as instructed by your supervisor. Job Knowledge, Skills, and Abilities • Must have the ability to learn quickly and work in a fast-paced manufacturing environment; excellent time management skills and the ability to work independently., • Flexible and the ability to quickly adapt to changes in the work environment and manages competing demands., • Inspires and motivates others to perform well and accepts feedback from others., • Well organized, dependable, punctual, strong work ethic with exceptional integrity., • Excellent written and verbal communication skills., • Working knowledge of computer operating systems., • Must be able to work in a manufacturing setting and comfortable working with letters and numbers., • Able to work flexible hours and available for overtime should a need arise. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this job include the ability to identify color and view objects up close. While performing the duties of this Job, the employee is regularly required to stand, sit, use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand and walk. The employee is occasionally required to reach with hands and arms. Disclaimer The above statements are intended to describe the general nature and level of work being performed by those assigned to a particular position. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required and personnel may be required to perform duties outside their normal responsibilities from time to time, as needed.

Job DescriptionMarketing Automation & CRM StrategistPosition: Direct HireLocation: Saint Louis, MO (Sunset Hills).Hours: M – F (8 to 5).Schedule: Hybrid (Friday).Preferred: Local candidates.Status: Must be a US citizen.Experience: 5 years.Education: Bachelor’s degree required.Salary: Market (Depending on experience).Benefits: Comprehensive compensation and healthcare packages, including medical, dental, vision, and life insurance products. 401(k) plan with employer match. Competitive paid time off: vacation, personal time, holidays, and winter break. Company sponsored volunteer & community outreach opportunities. Summary: Our client is seeking a Marketing Automation & CRM Strategist to elevate our email and CRM marketing programs. In this role, you’ll transform email into a highimpact, revenuedriving channel through advanced segmentation, lifecycle journey development, personalization, and continuous optimization. You’ll also serve as the company’s inhouse Dynamics expert, maximizing platform capabilities, strengthening data integrity, and driving measurable gains in lead generation, pipeline progression, retention, and revenue. This highly crossfunctional position collaborates closely with marketing, sales, design, CRM, and digital teams to align messaging and targeting in support of company growth.Responsibilities:Lifecycle & Automation Strategy • Own company’s email and marketing automation strategy across all markets, designing and optimizing full-funnel lifecycle journeys (nurture, onboarding, engagement, cross-sell, renewal, reactivation)., • Implement behavioral triggers, dynamic workflows, and lead scoring in partnership with sales and CRM teams., • Identify and execute opportunities to automate manual processes and improve efficiency.CRM & Dynamics Platform Ownership, • Serve as the primary marketing owner of Dynamics marketing automation, maximizing platform capabilities for segmentation, personalization, and performance., • Ensure accurate data flow, integration, and tracking in collaboration with CRM stakeholders., • Establish governance and best practices for database segmentation, workflows, and internal expertise-building.Segmentation, Personalization & Data Quality, • Develop advanced segmentation strategies across markets, personas, and buying stages., • Leverage dynamic content and personalization to increase engagement and conversions., • Maintain data hygiene and continuously refine audience targeting with CRM and sales partners.Performance Measurement & Optimization, • Define and monitor email KPIs tied to pipeline, retention, and revenue goals, • Analyze campaign performance, communicate insights, and adjust strategies to improve ROI., • Lead a structured testing roadmap (subject lines, cadence, segmentation, content, send time).Campaign Execution & Calendar Management, • Manage the cross-market email marketing calendar for customers and prospect communications., • Oversee campaign development, scheduling, QA, launch, and mobile optimization., • Maintain high standards for clarity, brand alignment, user experience, and cross-functional collaboration with copywriters, designers, and marketing teams.Content Strategy & Cross-Functional Alignment, • Guide copywriters and designers with clear messaging intent, content goals, and optimization insights, • Align email messaging with product marketing, sales, and digital gotomarket strategies, • Use performance data and user behavior to evolve content strategy and creative direction.Compliance & Best Practices, • Ensure all campaigns meet data protection regulations, deliverability standards, and industry best practices, • Maintain list health, optin integrity, and deliverability optimization while staying current on emerging trends and technologies.Requirements:, • 5+ years of experience in email marketing, lifecycle marketing, or marketing automation., • Proven experience owning lifecycle marketing strategy end-to-end., • Strong content strategy skills with experience developing high-impact messaging frameworks in a B2B environment., • Demonstrated success driving measurable impact on engagement, pipeline, retention, or revenue., • Strong expertise in database segmentation, dynamic content, and workflow automation., • Hands-on experience with marketing automation platforms; Dynamics 365 experience strongly preferred (HubSpot experience a plus)., • Experience implementing or optimizing nurture journeys and behavioral trigger campaigns., • Strong analytical skills with experience leveraging data to drive strategic decisions., • Experience aligning marketing automation with sales processes and CRM systems., • Working knowledge of email design best practices; HTML/CSS knowledge a plus., • Excellent project management skills with the ability to manage multiple campaigns simultaneously., • Strong cross-functional collaboration and communication skills., • Highly organized, detail-oriented, and proactive problem solver.

Job DescriptionAre we the road to your future? We are currently searching for an experienced Construction Engineering Inspector/Technician with relevant industry certifications to join our team in St. Louis, MO, or surrounding area. To be considered for this position, applicants must have, at minimum, a High School Diploma or equivalent. As a CEI Inspector/Technician, work is primarily routine and standardized inspection work which may include manual or electronic calculations and computations. You will perform independent inspection and documentation of construction processes and our team to assure compliance with the construction contract. Guidance to accomplish assignments is provided by higher level Inspectors, Project Engineers, or Resident Engineers. What you’ll be doing: • Making and checking engineering computations, • Documenting/Inspecting construction work, • Materials testing in the field, • Inspection of truck load tickets for aggregate, asphalt, or concrete, • Writing daily inspection reports, performing verification testing, and documenting test results and observations, • Performing SWPPP inspections, • Assisting in all types of record keeping and field measurements, as needed, • Work is performed under the general supervision of the Resident Engineer and/or Construction Engineering and Inspection Manager What you need to have: • High School Diploma or equivalent, • Five (5) years of experience in construction inspection, any prior experience in bridge and/or roadway construction inspection is preferred, • Some MoDOT and/or local agency inspection experience is a plus, • Must have a valid driver’s license and immediate ability to work in the United States, • Must be able to work nights and weekends as required, • Must apply safety philosophy and program to all operations, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines., • Valid driver’s license., • A satisfactory motor vehicle report (MVR)., • If applicable to the position, a post offer fit for duty evaluation to ensure the individual can safely perform the essential functions of the role. What we would prefer you to bring to Volkert: • At least 6 years of inspection experience with some MoDOT Technician Certifications, • ACI Field and/or Strength, Troxler or similar state DOT certification are preferred but not required Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-DNI Missouri

Job Description Overview Seeking an experienced QA Lead / Senior QA Engineer to own quality strategy and testing execution across multiple product teams. This role requires strong hands-on experience in manual and automated testing, leadership capability, and a focus on delivering high-quality, scalable software solutions. Key Responsibilities • Lead QA strategy, planning, and execution across multiple releases and teams, • Design, build, and maintain automated tests for functional, integration, and regression scenarios, • Perform manual testing to validate features, workflows, usability, and edge cases, • Validate security and vulnerability fixes without impacting existing functionality, • Collaborate with developers, BAs, and Product Owners to define acceptance criteria and test coverage, • Establish and enforce QA standards, processes, and best practices, • Review requirements and technical documents for clarity and testability, • Integrate automation frameworks with CI/CD pipelines, • Log, track, and prioritize defects and drive timely resolution, • Mentor junior QA engineers and provide testing status and quality metrics to stakeholders Required Experience & Skills • 5+ years of software QA experience, including 2+ years in a senior or lead role, • Strong manual and automation testing experience for web and API-based applications, • Hands-on experience with Selenium, Cypress, Playwright, or Postman, • Good understanding of QA methodologies, SDLC, and Agile/Scrum, • Proficiency in Python, JavaScript, or Java, • Experience with CI/CD tools such as Jenkins, GitHub Actions, or Azure DevOps, • Experience with API and performance testing tools (JMeter, LoadRunner), • Familiarity with Git, Jira, Zephyr/TestRail, and cloud environments (AWS preferred), • Strong analytical, problem-solving, and communication skills

Job Description Swank Motion Pictures, the world’s largest non‑theatrical distributor of studio‑licensed films, partners with major studios to deliver Hollywood content to schools, colleges, healthcare institutions, cruise lines, libraries, and other unique venues worldwide. As Swank modernizes its digital marketing ecosystem, we’re seeking a strategic, data‑driven Marketing Automation & CRM Strategist to elevate our email and CRM marketing programs. In this role, you’ll transform email into a high‑impact, revenue‑driving channel through advanced segmentation, lifecycle journey development, personalization, and continuous optimization. You’ll also serve as Swank’s in‑house Dynamics expert, maximizing platform capabilities, strengthening data integrity, and driving measurable gains in lead generation, pipeline progression, retention, and revenue. This highly cross‑functional position collaborates closely with marketing, sales, design, CRM, and digital teams to align messaging and targeting in support of company growth. Responsibilities: Lifecycle & Automation Strategy • Own Swank’s email and marketing automation strategy across all markets, designing and optimizing full-funnel lifecycle journeys (nurture, onboarding, engagement, cross-sell, renewal, reactivation), • Implement behavioral triggers, dynamic workflows, and lead scoring in partnership with sales and CRM teams, • Serve as the primary marketing owner of Dynamics marketing automation, maximizing platform capabilities for segmentation, personalization, and performance, • Ensure accurate data flow, integration, and tracking in collaboration with CRM stakeholders, • Develop advanced segmentation strategies across markets, personas, and buying stages, • Leverage dynamic content and personalization to increase engagement and conversions, • Define and monitor email KPIs tied to pipeline, retention, and revenue goals, • Analyze campaign performance, communicate insights, and adjust strategies to improve ROI, • Manage the cross-market email marketing calendar for customer and prospect communications, • Oversee campaign development, scheduling, QA, launch, and mobile optimization, • Guide copywriters and designers with clear messaging intent, content goals, and optimization insights, • Align email messaging with product marketing, sales, and digital go‑to‑market strategies, • Ensure all campaigns meet data protection regulations, deliverability standards, and industry best practices, • 5+ years of experience in email marketing, lifecycle marketing, or marketing automation, • Proven experience owning lifecycle marketing strategy end-to-end, • Strong content strategy skills with experience developing high-impact messaging frameworks in a B2B environment, • Demonstrated success driving measurable impact on engagement, pipeline, retention, or revenue, • Strong expertise in database segmentation, dynamic content, and workflow automation, • Hands-on experience with marketing automation platforms; Dynamics 365 experience strongly preferred (HubSpot experience a plus), • Experience implementing or optimizing nurture journeys and behavioral trigger campaigns, • Strong analytical skills with experience leveraging data to drive strategic decisions, • Experience aligning marketing automation with sales processes and CRM systems, • Working knowledge of email design best practices; HTML/CSS knowledge a plus, • Excellent project management skills with the ability to manage multiple campaigns simultaneously, • Strong cross-functional collaboration and communication skills, • Comprehensive compensation and healthcare packages, including medical, dental, vision, and life insurance products, • 401(k) plan with employer match, • Competitive paid time off: vacation, personal time, holidays, and winter break, • Company sponsored volunteer & community outreach opportunities, • Organizational growth potential through our company sponsored trainings EOE, including disabilities and Veterans

Job Description Quality Assurance Technician | DEMA Engineering Co. DEMA Engineering Co. is seeking a detail-oriented and driven Quality Assurance Technician to join our Quality team at our world headquarters located in Kirkwood, MO. This role plays a key part in ensuring our products consistently meet company, customer, and regulatory quality standards in a fast-paced manufacturing environment. If you take pride in accuracy, problem-solving, and improving processes-and you value honesty, respect, hard work, and teamwork, we want to hear from you. About the Role The Quality Assurance Technician performs a mix of inspection, testing, auditing, and documentation activities across incoming materials, in-process production, and finished goods. This position helps ensure compliance with internal quality systems while supporting continuous improvement initiatives across the organization. You will work closely with production, engineering, and leadership teams to identify issues, prevent defects, and improve product consistency and process efficiency. Key Responsibilities • Conduct manual and automated inspections, tests, and measurements of materials and products, • Perform incoming, in-process, first article, and final inspections, • Use precision measurement tools, including CMM, vision systems, and hand gages, • Interpret blueprints, specifications, and technical documentation, • Record inspection data and ensure compliance with acceptance/rejection criteria, • Identify and communicate quality concerns to production and engineering teams, • Support audits, process checks, and document control activities, • Assist with non-conformance disposition and corrective actions, • Help maintain and update work instructions, inspection forms, and controlled documents, • Participate in quality improvement and lean manufacturing initiatives, • High school diploma required; technical or associate degree preferred, • 1–3 years of quality, manufacturing, or inspection experience (or equivalent training), • Strong mechanical aptitude and intermediate math skills, • Ability to read blueprints and technical documents, • Experience with measurement tools and inspection methods preferred, • Strong attention to detail and problem-solving skills, • Ability to work independently while contributing to a team environment, • Effective communication skills across all levels of the organization, • Proficiency in Microsoft Office (Excel preferred); ERP/MRP experience a plus, • Commitment to safety, quality standards, and continuous improvement, • Ability to work in a manufacturing environment with moderate noise and variable conditions This position is onsite in a manufacturing and lab environment. The role includes exposure to machinery, tools, noise, and varying temperatures. Safety compliance and adherence to quality procedures are essential. Why Join the DEMA Team? At DEMA, we believe strong teams build strong products. We are committed to a culture rooted in: • Honesty – We do the right thing, even when no one is watching, • Respect – We value every team member's contribution, • Hard Work – We take pride in doing things the right way Apply today to join a team where quality matters, people matter, and your work makes a difference. About Us: DEMA is a world leader in the development of proportioning chemical dispensers and fluid control products. Established in 1956 with headquarters in St. Louis, Missouri, DEMA has grown to include manufacturing and warehouse facilities in Missouri, Zeewolde Netherlands, and Sydney Australia. Embracing our heritage, DEMA remains owned by the Deutsch family, with active 3rd and 4th generation family members leading the company. DEMA's chemical dispensing products are used to safely and accurately blend chemicals and water for a variety of applications, including housekeeping, food service, food processing, dish wash, laundry, and car wash. DEMA's range of solenoid valves are used in many industries, including car wash, beverage and chemical dispensing, agriculture, misting, reverse osmosis, and high-pressure cleaning machines. DEMA Engineering is an Equal Opportunity Employer committed to building a diverse and inclusive workplace.

Job DescriptionCompany Description PQ is a leading global provider of silicates, silicas and derivative products. PQ's products are used in a wide variety of industrial processes and many customer products, from decorative paints to green cement, from clean drinking water to green tires and from toothpaste to biofuels and beer. Ideal candidates resonate with PQ's Core Values of Integrity, Sustainability, People, Customer Focus and Safety. Successful employees embrace and model these values in their behaviors and actions. Job Description This position is responsible for producing and packaging finished silica gel products per customer specifications from incoming raw materials. Operate the process in compliance with all health, safety and environmental rules and regulations. Essential Duties & Responsibilities • Monitor the process through manual and/or automated control panel adjustments, • Make necessary adjustments (physical and mathematical) to the process to maintain quality product and output., • Perform lab testing for in-process and finished products, • Document all test results, process parameters and adjustments and environmental regulatory requirements, • Perform all packaging requirements including filling, palletizing and warehousing of finished product., • Operation of forktruck to include loading and unloading of trucks., • Comply with all federal, state, and local environmental, health, and safety regulations and requirements., • Comply with company policies and site work rules., • Perform needed housekeeping functions, • Complete environmental data gathering, as needed, • Other duties as assigned or required.Qualifications, • Ability to learn and comprehend manufacturing processes., • Ability to work as a member of a 3 person team., • Willingness to learn new skills, as needed., • Ability to assist others in completing required tasks., • High school diploma or equivalent. Basic mathematical abilities and skills., • Must be proficient with Microsoft Office Products (Excel, Outlook, and Word). SAP and PLC experience is desired but not essential., • Experience with lab testing equipment and general lab safety., • Exceptional communication skills, both verbal and written., • Essential, • Sound analytical and problem-solving skills Additional Information Special Factors • Manufacturing plant that operates 24/7/365, • Ability to work 12 hour/rotating shifts (monthly), • Ability to work OT, as required, • Ability to work in non-temperature controlled environment, • Communicates, promotes and personally demonstrates Safety/Health (including PQP Principles) as #1 priority, • Participation in risk assessment audits as applicable, • Understand PQ Principles (PQP) and how they are implemented in the site organization, rules and procedures

Job Description Job Title: QA Lead / Senior Quality Assurance Engineer Location: NJ or STL (Hybrid) Employment Type: Contract Experience Level: 7+ years Rate: 45$/Hr on 1099/ C2C Overview We are seeking an experienced and detail-oriented Senior QA Engineer to drive quality strategy, test planning, and execution across multiple product teams. This role requires strong technical expertise in both manual and automated testing, leadership capabilities, and the ability to ensure delivery of high-quality, reliable software. The ideal candidate is proactive, collaborative, and passionate about building scalable QA processes. Key Responsibilities • Lead overall QA strategy, planning, and execution across multiple teams or product releases., • Design, develop, and maintain automated test scripts for regression, integration, and functional testing., • Perform manual testing to validate new features, user workflows, usability, and edge cases., • Test vulnerability fixes and ensure the application works as expected, validating that security patches do not introduce regressions or impact existing functionality., • Collaborate closely with developers, BAs, and Product Owners to define clear acceptance criteria and ensure thorough test coverage., • Establish and govern QA processes, standards, and best practices across teams., • Review and analyze requirements, specifications, and technical design documents for clarity, completeness, and testability., • Maintain and improve automation frameworks, integrating them seamlessly with CI/CD pipelines., • Identify, document, prioritize, and track software defects, partnering with engineering teams for timely resolution., • Mentor and guide junior QA engineers in both manual and automation testing techniques. Required • 5+ years of experience in software QA, including 2+ years in a lead or senior QA role., • Strong experience in both manual and automated testing for web or API-based applications., • Hands-on expertise with automation tools such as Selenium, Cypress, Playwright, or Postman., • Solid understanding of QA methodologies, SDLC, and Agile/Scrum practices., • Proficiency with scripting languages such as Python, JavaScript, or Java for automation., • Experience with CI/CD tools such as Jenkins, GitHub Actions, or Azure DevOps., • Excellent analytical, debugging, and problem-solving skills., • Strong communication and collaboration abilities., • Experience with API testing and performance testing tools such as JMeter or LoadRunner., • Knowledge of version control systems, particularly Git., • Experience testing in AWS or other cloud environments., • Demonstrated leadership and mentorship within cross-functional teams., • High attention to detail with a passion for delivering high-quality, reliable software., • Ability to balance strategic QA oversight with hands-on participation., • Strong communication skills, able to translate technical issues into clear business outcomes.

Job Description Summary: Provides technical, quality control and administrative support to Superintendents, Project Engineers and Project Managers on jobsites Essential Functions: • Ensures that all Nicholson and OSHA safety regulations are followed and enforced, • Performs field quality control tests, • Prepares and manage quality control and production records, • Orders materials, writes purchase orders, and tracks inventory, • Runs small work crews (technical tasks like water testing, load testing, etc.), • Researches and resolves drawing interpretation problems, conflicts, interferences, and errors, • Performs field surveys and resolves geometry issues, • Prepares drawings and sketches to support construction work, • Assists in preparation of change order documentation and claim analysis, • Ensures all installation follows Nicholson Quality Control Manual Education & Training: • Bachelor of Science degree in Civil Engineering, Construction Management or related degree Experience: • Experience (1-3 years) of construction equipment/ techniques (i.e. drawings, specifications, building materials, surveying, design, or geotechnical work) Knowledge and Abilities: • Basic knowledge of bidding and job costing procedures, • Knowledgeable in structural and geotechnical designs related to our techniques, • Proficient with MS Word, Excel and Outlook Physical Requirements: • Lift, carry, pull and push at least 40 pounds, • Travel per the company travel policy, often overnight and away from home Mental Requirements: • Converse effectively using both verbal and written communication., • Make decisions and assume accountability, • Concentrate on tasks, • Demonstrate ability to manage stress and emotions as related to the workplace, • Attention to detail, • Identify and resolve conflict, • Assess safety and risk Benefits: • Medical, • Dental, • Vision, • Short Term Disability, • Long Term Disability, • Accidental Death and Dismemberment, • Life Insurance, • Maternal and Paternal Leave, • 401(k)matching, • Safe Harbor Retirement Plan, • Employee Assistance Program, • Paid Vacation, • Sick Days Nicholson Construction participates in E-Verify. Please be advised that all interested candidates are REQUIRED to attach a copy of your resume in order to be considered. In an effort to foster a diverse workforce Nicholson Construction encourages applications from minorities, veterans, women and individuals with disabilities. EOE AA M/F/Vet/Disability If you want to view the EEO is the Law poster, please choose your language: English – Spanish – Arabic - Chinese

Job DescriptionDescription: POSITION: LICENSED CLINICAL SOCIAL WORKER DIAGNOSTICIAN 2026-2027 School Year STATUS: PRN, up to 29 hours per week PAY: Per completed report or $47 per hour REPORTS TO: Testing Supervisor LOCATION: Testing in St. Louis City charter schools, private evaluations, and public schools outside of St. Louis County (preschool, elementary, middle school, high school, and college). Requirements: QUALIFICATIONS: • Master's degree in social work, • LCSW fully licensed in Missouri, • 2 years of experience evaluating children and adolescents for mental health issues, • Good understanding of DSM-5-TR diagnoses, • Proficient with technology, • Transportation to various schools within the St. Louis area, • Conduct psychosocial evaluations in a private setting to diagnose ADHD, anxiety, depression and other DSM-5-TR disorders., • Diagnose disorders using the DSM-5-TR manual., • Conduct diagnostic interviews and observations with clients and their parents, interview teachers as needed, and distribute and score social/emotional/behavioral rating scales as part of a comprehensive Psycho-Social Evaluation, • Write professional reports, including assessment results and interpretation, as well as diagnostic impressions, and make appropriate recommendations based on findings., • Complete reports within DESE specified time periods when necessary., • Facilitate report review meetings with parents and/or school personnel., • Review psycho-educational reports and render DSM-5-TR diagnoses, including Specific Learning Disorders., • Collaborate with school psychologists, speech/language pathologists, and occupational therapists also conducting evaluations with the same child., • Make mental health recommendations to school psychologists to add to psycho-educational reports.

Job DescriptionRole Overview We are hiring Forward Deployed AI Engineers (FDEs) to partner with one of the largest healthcare payers in the U.S. to drive AI-led transformation across core business workflows. This is not a traditional engineering role. You will work directly with business and technology teams to design, build, and deploy AI agents that transform how healthcare operations function, while enabling teams to become AI-native and self-sufficient. You will operate at the intersection of AI, engineering, and healthcare operations, delivering real-world impact across critical payer workflows. Key Responsibilities1. AI-Driven Business Transformation • Redesign healthcare processes using AI-first principles, • Identify opportunities to replace or augment manual workflows with AI agents, • Translate business problems into working AI solutions2. Agentic AI Design & Deployment, • Design, build, and deploy AI agents for enterprise workflows, • Implement multi-agent systems using LLMs (prompting, memory, tool usage), • Rapidly prototype and productionize solutions using platforms such as:, • OpenAI, • Anthropic, • Google (Gemini)3. Forward Deployed Execution, • Work directly with client teams (business + IT) to:, • Whiteboard solutions, • Build prototypes in days/weeks, • Deploy and iterate rapidly, • Operate as a trusted advisor and builder4. AI-Augmented SDLC, • Leverage AI across the software lifecycle:, • Code generation and refactoring, • Automated testing and validation, • Documentation and observability, • Drive productivity improvements across engineering teams5. Enablement & Adoption, • Train business and operations teams to:, • Use AI tools and agents effectively, • Build and iterate workflows independently, • Develop reusable playbooks and frameworksDomain Focus (Healthcare Payer Workflows), • Claims Processing & Adjudication, • Prior Authorization, • Member & Provider Contact Center, • Provider Data Management, • Care Management & Utilization Review, • Revenue Cycle & Payment IntegrityRequired SkillsTechnical, • Strong software engineering background (Python, APIs, microservices), • Experience with LLMs, prompt engineering, and AI frameworks, • Familiarity with agent frameworks (LangChain, Semantic Kernel, etc.)AI & Data, • Experience building AI/ML or LLM-powered applications, • Understanding of structured and unstructured data pipelines, • Knowledge of model evaluation, monitoring, and governanceCloud, • Experience with:, • AWS, • AzureConsulting Mindset, • Strong communication and stakeholder management, • Ability to work directly with business teams, • Experience in rapid prototyping and iterative deliveryPreferred, • Experience in U.S. healthcare payer or PBM environments, • Understanding of claims, prior auth, or care management workflows, • Familiarity with regulatory/compliance (HIPAA) Experience, • 6–12+ years in software engineering, AI, or related roles, • Prior client-facing / consulting experience preferredWhat Makes This Role Unique, • Work at the forefront of AI-driven enterprise transformation, • Build real-world AI agents replacing traditional workflows, • Direct business impact through a forward-deployed model, • Opportunity to scale from pilot solutions to enterprise-wide programs Success Metrics, • Number of workflows transformed using AI, • Reduction in manual effort and cost-to-serve, • Adoption of AI tools by business teams, • Speed from prototype to production

Job Description Open position in RADaR office locations, including Kansas City, MO, Columbia, MO, and St. Louis, MO; Hybrid work schedule: 3 days in the office, 2 days working from home Visa sponsorship is not available for this position, now or in the future. Applicants must be legally authorized to work in the United States on a permanent basis without requiring employer sponsorship. The Data Visualization Analyst is a specialist dedicated to transforming complex, raw data into clear, actionable, and visually compelling narratives. This role is centered on Tableau mastery, requiring an individual who can not only build interactive dashboards but also architect the data models that power them. The Analyst will work closely with client strategists to define KPIs, identify trends, and communicate insights that drive strategic decision-making. While the core focus is technical visualization, an understanding of marketing and media metrics is highly valued to support our agency's data storytelling efforts. Essential Duties and Responsibilities (Other duties may be assigned) • Expert Dashboard Development: Lead the design, creation, and maintenance of interactive, user-friendly, and high-impact reports in Tableau, ensuring all visualizations meet brand standards and user needs., • Data Analysis & Modeling: Clean, organize, and analyze datasets from disparate sources to identify critical trends and patterns. Use SQL to extract and manipulate data for efficient reporting., • Strategic Data Storytelling: Translate technical findings into visual formats (graphs, charts, heatmaps) that provide clear, actionable recommendations for executive and technical stakeholders., • Requirement Gathering: Act as a bridge between technical teams and business units, working directly with stakeholders to define reporting requirements and establish relevant Key Performance Indicators (KPIs)., • Process Automation: Identify and implement opportunities for automation within the data reporting lifecycle to increase efficiency and reduce manual data handling., • Quality Assurance: Perform rigorous data validation and testing to ensure the accuracy and integrity of all dashboards and reports., • Professional Experience: 2–5 years of hands-on experience in data modeling and professional data visualization., • Tableau Mastery: Advanced proficiency is mandatory. Candidates must demonstrate deep experience in building complex workbooks, using Level of Detail (LOD) expressions, and optimizing dashboard performance., • Analytical Thinking: A proven ability to interpret large, complex datasets and identify the "so what" behind the numbers., • Communication: Exceptional verbal and written skills, with a specific talent for presenting data to non-technical audiences.Preferred Skills, • Data Wrangling: Experience with SQL for data extraction, manipulation, and join logic., • Marketing & Media Experience: Familiarity with marketing analytics (e.g., Google Analytics, Meta Ads, Search metrics) and media agency workflows., • Advanced Excel: Proficiency in complex formulas, PivotTables, and Power Query., • The chance to be a part of a growing company and the next success story, • Amazing opportunities for career development, • Recognition programs, • Employee referral bonus, • Hybrid work schedule; 3 days in the office, 2 days working from home, • Fun and collaborative work environment, • Casual dress code, • Insurance Coverage (medical, dental, vision, life, and disability), • 401(k) retirement plan, with employer 4% match, • Work/life benefits, including mental health and wellbeing support, • Flexible Time Off Policy, • Paid holidays, including agency soft closing Christmas Eve-New Year's Day

Job Description Company Overview With its headquarters in Singapore and strategically placed offices across the United States, Turkey, Japan, and Malaysia, Rapsodo represents more than just sports technology and data analytics. It stands as the clear front-runner in providing affordable, professional-grade technology for athletes aiming to enhance their performance. The company currently collaborates with partners such as The PGA of America, Golf Digest, Troon, various Major League Baseball teams, USA Baseball, and over 1000 NCAA athletic departments. Become a part of Team Rapsodo as we challenge limits and unveil endless potential, one data point and one heartwarming success story at a time. Powered by Athletes who get it, and Engineers who can do it. Role Overview The Performance Marketing Lead is responsible for driving paid media performance and improving the marketing systems that support customer acquisition, conversion, and lifecycle execution. This role combines hands-on channel ownership with a strong understanding of how marketing systems and data flow together. The goal is to improve performance while bringing greater structure, visibility, and consistency to how marketing operates. This is a hands-on role with clear ownership of acquisition performance and a meaningful role in improving how the growth engine functions end-to-end. Key Responsibilities Paid Media Performance Own the performance of paid media campaigns across Meta and Google platforms, including: • Campaign setup and execution, • Audience targeting and segmentation, • Creative testing and iteration Key metrics include: • Customer Acquisition Cost (CAC), • Return on Ad Spend (ROAS), • Click-through rate (CTR), • Own visibility into the digital customer journey from initial engagement through purchase and activation., • Analyze funnel performance and identify drop-off points, • Connect paid media performance to on-site behavior and downstream outcomes Support and improve the marketing systems that enable campaign execution and lifecycle coordination. • Work with platforms such as Pardot, Iterable, and workflow tools (e.g., Zapier), • Ensure campaigns, lead flow, and automation workflows function reliably You will also identify gaps in current workflows and improve how systems support marketing performance and scalability. Attribution & Performance Insights Develop a clearer understanding of what drives acquisition and conversion. • Analyze performance across channels and touchpoints, • Identify what is working and where budget can be optimized Own SEO strategy and performance tracking at a high level. • Conduct keyword research and identifying opportunities, • Track organic traffic and search rankings Efficiency & Automation Improve how marketing operates by introducing more efficient and scalable ways of working. • Streamline reporting and analysis workflows, • Improve campaign execution processes Work closely with: • Growth & Marketing (campaign execution and performance), • Product (experience and conversion improvements), • Customer Experience (onboarding and insights) Requirements Qualifications • 3–6 years of experience in performance marketing, digital marketing, • Proven ability to independently manage and optimize Meta and Google ad campaigns, • Experience working with marketing automation platforms (e.g., Pardot, Iterable, HubSpot, or similar), • Strong analytical skills and ability to interpret performance data, • Experience working with or strong interest in automation and efficiency tools, • Ability to operate independently and manage multiple priorities

Job Description Quality Control Specialist I This is an onsite, in-office position at Geneoscopy HQ in St. Louis, Missouri. The Quality Control (QC) Specialist I is responsible for performing quality control activities related to medical records and other quality documentation throughout the testing and manufacturing lifecycle. This role ensures accuracy, completeness, and compliance with internal procedures, regulatory requirements, and quality standards. The QC Specialist I reviews and verifies records, identifies discrepancies, and supports timely resolution to maintain data integrity and product quality. This position collaborates cross-functionally with laboratory, manufacturing, and quality teams to support efficient operations and continuous improvement within the quality management system. RESPONSIBILITIES • Conduct QC reviews of sample/specimen data for accuracy throughout the testing process., • Help to provide assurance of the quality of our products by evaluating incoming materials, inspecting components and products at various stages, and evaluating the functionality of finished products using ddPCR., • Support the laboratory and clinical operations, performing QC checks as needed on data and manual entries., • Collaborate with laboratory personnel to update or open nonconformances for inaccurate data., • Track and trend QC data and prepare quality presentations., • Assist in maintaining compliance with all applicable regulations and requirements (CLIA, CAP, NYS, DOH, FDA, ISO, etc.)., • Support the Quality Management System, including but not limited to nonconformances and customer complaint processes., • Conduct gap analyses and best practice reviews to sustain and continually improve the Quality Management System., • Participate in internal and external audits and manufacturing inspections., • Review incoming material release inspections., • Navigate and execute laboratory equipment inspections., • Review, revise, author, and implement new procedures and/or controls to achieve regulatory compliance and operational efficiency., • Perform work under general supervision, navigating through moderately complex problems., • Exemplify solid knowledge of the subject matter., • Bachelor's Degree within a science-related field required., • Possess 1-2 years of experience in a CLIA/CAP or QSR-regulated environment., • Possess a minimum of 2 years of PCR testing experience., • Demonstrate the ability to read and understand technical procedures and instructions., • Exemplify the ability to multitask and thrive in an agile, fast-paced, deadline-driven environment while remaining flexible, proactive, resourceful, and efficient., • Possess proficient verbal and written communication skills, while willing to share and receive information and ideas from all levels of the organization to achieve the desired results., • Possess high ethics and conduct business in the most professional manner., • Seek inclusiveness and collaboration but step up to responsibility, make tough decisions, and be accountable for those decisions. COMPENSATION & BENEFITS • Base salary range: annually determined based on the candidate's experience, knowledge, and abilities., • Bonus: discretionary annual bonus based on a percentage of the employee's base salary, • Benefits: health, vision, dental, life insurance, 401k (with employer match), and paid time off., • Company stock options ADDITIONAL INFORMATION Geneoscopy's Core Values Ability to embody Geneoscopy's beliefs, philosophies, and principles: • Integrity - we do the right thing through our words, actions, and behaviors, • Courage - step up, speak up, stand out, • Agility - think and act fast, embracing change, • Passion - for our customers, our people, our work, and for excellence, • Collaboration - our differences are assets Physical Demands • Employees may be required to lift routine office supplies and use standard office equipment., • Must possess the ability to sit and/or stand for long periods., • Must possess the ability to perform repetitive motion. Work Environment • May have exposure to fumes and bio-hazardous material in the laboratory environment., • May be required to handle blood-borne pathogens and general laboratory reagents. By completing this online employment application, you certify that the information on this application is true and complete to the best of your knowledge. You understand that any misrepresentation or omission of fact in response to any inquiry made in this application may result in the rejection of the application or if hired, dismissal whenever it is discovered. You authorize and release all parties from any liability or damage that may result from seeking, furnishing, or using such information. You understand and agree that, if hired, your employment is for no definite period and may, regardless of the date of payment of compensation, be terminated by Geneoscopy at any time, for any or no reason, with or without notice. You understand that no representation to the contrary is valid unless in writing, setting a definite term of employment, and signed by the company's CEO. You further understand and agree that any job offer is contingent upon your passing, to the company's satisfaction, a criminal background check, reference checks, and other possible screenings. You understand that this application is active for 90 days only, and if you do not hear from the company but still wish to be considered for employment after 90 days, you will need to fill out a new application.

HPC-Industrial, powered by Clean Harbors, in Granite City, IL is looking for a Hydro Blasters/General Laborers to work at various customer locations, and to join their safety conscious team! This team member is responsible for the successful execution of setting up and assisting with water treatment systems, pipeline hydrostatic testing and various other responsibilities. The HydroBlasters/Laborers serves as representative of HPC-Industrial in creating a continuous working relationship with clients/customers. Availability to work variable shift times including nights and weekends. Availability to travel between job sites and to out of state projects as needed. Transitioning Military, this is a great opportunity to leverage your skills and training as you return to civilian life. Why work for HPC-Industrial? Health and Safety is our #1 priority, and we live it 3-6-5! Competitive wages $20.00 - $23.00 Comprehensive health benefits coverage after 30 days of full-time employment Group 401K with company matching component Own part of the company with our Employee Stock Purchase Plan Opportunities for growth and development for all the stages of your career Generous paid time off, company paid training and tuition reimbursement Positive and safe work environments RESPONSIBILITIES Ensures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all times; Hands-on operation of manual and automated Hydroblasting equipment; Operation of special equipment, such as Ultra High-Pressure pumps; Operate equipment by energizing the pumping equipment and/or any specialized Hydroblasting and/or Chemical cleaning equipment, vacuum trucks and cutting equipment being used on the job; May be required to examine surface cleaned to ensure conformance to company and customer expectations; Conduct routine and required maintenance on the unit and all peripherals, including industrial vacuuming equipment and the disposal of hazardous and non-hazardous materials; Perform routine maintenance on company equipment being used on the job; Additional duties as assigned. Required Qualifications: Specific vocational preparation including classroom safety training, on-the-job training and essential experience gained on other jobs; Language proficiency: understand English at a level to comprehend safety training and respond to instructions in emergency situations; Valid driver license and other requirements of company’s driving policy required when driving company vehicle or using personal vehicle on company business; OSHA certification may be required for this job; Must be knowledgeable in the operation of emergency equipment, such as fire extinguishers; May have to provide Federal Transportation Workers Identification Credential (TWIC). QUALIFICATIONS What does it take to work for HPC-Industrial? High School diploma or equivalent (required); Valid TWIC required or ability to obtain TWIC. Availability to work variable shifts including nights and weekends. Availability to travel 20% between work sites and to out of state projects if needed. About HPC-Industrial HPC-Industrial, a Clean Harbors company, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. HPC-Industrial offers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees. HPC-Industrial is an equal opportunity employer. HPC-Industrial is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact ect@#64;cleanharbors.com or 1-844-922-5547. HPC-Industrial is a Military & Veteran friendly company. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. *HPC

Job Description: Joining The American Red Cross is like nothing else - it's as much something you feel as something you do. You become a vital part of the world's largest humanitarian network. Joining a team of welcoming individuals who are exceptional, yet unassuming. Diverse, yet uncompromising in unity. You grow your career within a movement that matters, where success is measured in people helped, communities made whole, and individuals equipped to never stop changing lives and situations for the better. When you choose to be a force for good, you'll have mentors who empower your growth along a purposeful career path. You align your life's work with an ongoing mission that's bigger than all of us. As you care for others, you're cared for with competitive compensation and benefits. You join a community that respects who you are away from work as much as what you do while at work. Where Your Career is a Force for Good! WHAT YOU NEED TO KNOW: As a IRL Technologist at the Red Cross you will perform basic and advanced donor and patient tests, and interpret results to determine donor-recipient compatibility.You will resolve compatibility problems; provide intermediate reference and consultation services to hospitals and transfusion services. Perform automated and manual test procedures on blood samples WHERE YOUR CAREER IS A FORCE GOOD Key Responsibilities: * Resolving compatibilityproblems, andproviding complex reference and consultation services to hospitals and transfusion services. * Performing automated and manual test procedures on blood samples. * Managing receipt, coordination, shipment,and transport of patient and donor blood samples and documenting supply and equipment problems. * Managing reagent inventory (ordering, receiving, inspection and preparation). * Recognizing/resolving testing irregularities and assisting other Medical Technologists in problem resolution. * Consulting with staff at other medical facilities, to resolve complex serologic problems and providing special units to transfusion recipients. * Performing manufacturing duties associated with special blood products, if applicable. Standard Schedule: Sat-Sun, flexibility on 1 day in the week. 7am-7pm Baylor shift. Shift Differential Offered and Sign on Bonus WHAT YOU NEED TO SUCCEED: * MT(ASCP) * Bachelor's degree with major in biological science or chemistry * Minimum 3 years of related experience or equivalent combination of education and related experience required. * MLT (ASCP) certification with 5 years of blood banking experience can be substituted. * State license may be required where applicable. * Skills & Abilities: Good written and verbal skills to communicate effectively with internal and external customers. * Must be able to work on a team. WHAT WILL GIVE YOU THE COMPETITIVE EDGE (Preferred Qualifications): * BB(ASCP)or SBBand/or experience in a Reference Laboratory Physical Requirements: Requires standing, stretching, stooping and bending for extended time periods. Lift, pull, push and move objects of up to 50 pounds. May work in walk-inrefrigerator/freezersfor periods of time. Required to wear protective clothing such as lab coats, gloves, face shields, etc. BENEFITS FOR YOU: As a mission-based organization, we believe our team needs great support to dogreat work. Our comprehensive package includes: * Medical, Dental Vision plans * Health Spending Accounts & Flexible Spending Accounts * PTO: Starting at 15 days a year; based on type of job and tenure * Holidays: 11 paid holidays comprised of six core holidays and five floating holidays * 401K with up to 6% match * Paid Family Leave * Employee Assistance * Disability and Insurance: Short + Long Term * Service Awards and recognition The American Red Cross is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, San Diego Fair Chance Ordinance, the California Fair Chance Act and any other applicable state and local laws. AmeriCorps, the federal agency that brings people together through service, and its partners - the Peace Corps, AmeriCorps Alums, National Peace Corps Association, and the Service Year Alliance - launched Employers of National Service to connect national service alumni with opportunities in the workforce.American Red Cross is proud to be an ___ partner and share our employment opportunities with the network of organizations. Interested in Volunteering? Visit___ to learn more, including our most-needed volunteer positions. To view the EEOC Summary of Rights, click here: ___

Job Description JOB RESPONSIBILITIES: • Operate Tanker Truck according to state and federal laws and observing all safety regulations established by the Company and DOT., • Pick liquid products up from our customers, transporting to and dumping liquid products at a designated Company facility., • Ensure contents are properly secured inside of truck to prevent leakage and make sure trailer is mechanically ready for pick-up and transportation., • Ensure you are hooked to the proper port at Customer sites., • Reseal all empty tankers after unloading., • Wear all proper safety equipment, footwear, gloves, etc., • Always use 3-point contact with grab handles or ladders when ascending and descending from truck and trailer., • Must be able to drive in all-weather conditions., • Map pick-up routes to ensure timely service., • Perform pre-trip and post-trip inspections of assigned vehicle, including confirmation of proper 5th wheel connection., • Maintain detailed driving logs., • Immediately notify supervisor of any minor or major maintenance or safety issues and accidents., • Always ensure your vehicle is kept clean., • Possess a current Class A CDL in good standing, current DOT medical card, and current Tanker Endorsement., • Clean MVR with no DUIs, no major violations, and no more than a combo of 3 at-fault accidents or violations in the past 3 years, • Must be able to drive a manual, aka "stick shift" on a CDL-A vehicle, • Must be able to pass an extensive DOT drug screening, which includes urine, hair and breath alcohol testing, • Must be willing to work Saturdays, • Must be comfortable driving CDL tractor-trailers of 13 speeds or higher, • Must be willing to submit to a criminal background check, • Must be eligible to work in the United States, • Must be able to follow instructions, take directions well and be able to adapt to changes in the operation., • Must be a strong team player willing to help wherever necessary and have a "can do" attitude., • Must have a strong work ethic and be able to remain busy the entire day, looking for new tasks or where else to help when your tasks are completed., • Strength: Tanker drivers need to be able to lift and carry heavy loads, and to push and pull. For example, a tanker driver needs to be able to lift or move hoses and fittings that weigh up to 50 pounds without assistance frequently and carry up to 150 pounds with assistance., • Mobility: Tanker drivers need to be able to bend, stoop, crouch, squat, twist., • Balance: Tanker drivers need to be able to climb in and out of the cab, on and off the trailer, and up and down a fixed ladder., • Dexterity: Tanker drivers need to have manual dexterity to operate hand tools., • Vision and hearing: Tanker drivers need to have good eyesight and hearing., • Blood pressure and blood sugar: Tanker drivers need to have healthy blood pressure and blood sugar levels., • Heart health: Tanker drivers need to have a healthy heart and be free of current heart issues., • MANY opportunities for overtime for those who seek it!, • Local and HOME AT LEAST 95% OF THE TIME, • 6 Paid Holidays!, • Paid Time Off!, • Medical, Dental and Vision offered!, • Voluntary Term Life Insurance offered!, • Short-Term Disability (STD) coverage offered!, • Accidental Death and Dismemberment (AD&D) coverage offered!, • FREE $10K coverage in Term Life Insurance!, • 401(k) Retirement Plan with STRONG match!, • Family-oriented positive culture, ideal for those looking for a long-term career!, • Opportunity for growth! Job Posted by ApplicantPro

Description Leidos Intelligence Sector combines technology-enabled services and mission software capabilities in the areas of cyber, logistics, security operations, and decision analytics to support our defense and intel customers’ mission to defend against evolving threats around the world. Our team’s focus is to ensure our customers have the right tools, technologies, and tactics to keep pace with an ever-evolving security landscape and succeed in their pursuit to protect people and critical assets. The Geospatial Analyst Solutions Directorate, part of the National Solutions Business Area, is currently seeking a highly motivated Senior Test Engineer for the Maru program, a critical initiative focused on modernizing geospatial processing and exploitation mission software. We are seeking a detail-oriented Manual Tester to support quality assurance efforts across web applications, APIs, and microservices within an agile development environment. This role focuses on executing manual test cases, identifying defects, validating system functionality, and ensuring software meets functional and performance requirements prior to release. The ideal candidate has strong experience in manual software testing, requirements analysis, and defect tracking. This individual will work closely with developers, DevSecOps engineers, product owners, and other stakeholders to ensure high-quality, reliable software delivery. TS/SCI with the ability to obtain a Polygraph Primary Responsibilities: * Test Planning & Execution: Develop, document, and execute manual test plans, test cases, and test scripts based on system requirements and user stories. * Functional Testing: Perform functional, regression, integration, and smoke testing. * API Validation: Validate RESTful APIs using the available tools. * Defect Management: Identify, document, track, and verify defects. * Requirements Analysis: Analyze system requirements and user stories to ensure complete test coverage and identify edge cases. * Test Documentation: Maintain traceability matrices, test artifacts, and supporting documentation in accordance with program standards. * Collaboration: Work closely with developers and cross-functional teams to clarify requirements, reproduce issues, and validate fixes. Basic Qualifications: * US citizenship is required per contract. * Bachelor’s degree in Computer Science, Engineering, or related field with 8-12 years of relevant experience; or Master’s degree with 6-10 years of relevant experience. * 4+ years of experience in software quality assurance and manual testing. * Strong experience developing and executing manual test cases. * Experience testing web-based applications and RESTful APIs. * Familiarity with defect tracking tools and test management systems. * Working knowledge of RESTful services, HTTP, JSON, and web application workflows. * Strong analytical, troubleshooting, and documentation skills. * Excellent written and verbal communication skills. Preferred Qualifications: * Exposure to automated testing frameworks (e.g., Playwright, Cypress, Selenium). * Familiarity with CI/CD pipelines and release processes. * Familiarity with security or compliance-focused testing practices. #MARU If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. May 12, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $92,300.00 - $166,850.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Job Description Job Summary: To assist in the performance of duties necessary to keep the physical structure and associated equipment of hospital in good repair. Functions and Duties: • Maintain and repair HVAC equipment and associated components in working order., • Repair/install HVAC ducting, diffusers, dampers and controls., • Maintain a current EPA Freon certificate., • Maintain current refrigerant record of use., • Performs all assigned tasks in a professional manner to reflect the highest integrity of the Maintenance department., • Assists in maintaining and repairing HVAC controls and associated equipment to maximize efficiency levels in all environmentally controlled areas., • Performs urgent corrective, routine and requisitioned repairs of electrical, mechanical and plumbing systems as required., • Performs preventative maintenance duties to all physical structures of hospital and complies with all building safety codes. This is to include facility equipment and associated controls., • Performs preventative maintenance on equipment and systems as required., • As required, assists in maintaining electrical wiring and emergency generator systems., • Inspects and tests equipment/systems., • Maintains routine records of all inspections, preventative maintenance and repairs performed on any equipment or system., • Repairs walls and physical surfaces, cosmetic items, protection, and other treatment area components as needed including paint touch-ups., • Assists in replacing, installing, repairing and testing electrical circuits, equipment, appliances and lighting systems as required., • Assists and supports grounds and property maintenance as necessary. Duties include: light pavement maintenance, grounds keeping, safety marking maintenance, building exterior maintenance, rubbish removal, etc., • Performs manual duties as requested (i.e., moving supplies or furniture, replacing light bulbs, removing trash or scrap material). Education • Valid Driver’s license required., • HVAC certification preferred., • Ability to read and understand blueprints and schematics, • Ability to read and understand manufactures operating procedures, • Ability to trouble shoot and determine corrective repair to equipment, • Working knowledge of refrigeration systems, • Sit or stand for a prolonged periods of time., • Regularly exposed to body fluids with the risk of blood borne pathogens or airborne pathogens., • Average lifting 50 pounds / Able to transfer 60 pounds., • Able to wear personal protective equipment (PPE) (mask, gown, gloves, other hearing and body protection)., • Works in a safe manner with all tools and equipment needed to accomplish the above essential functions and duties. Examples: ladders, hand and power tools, industrial tools such as table saws, portable pumps, drain cabling and hydro flush machines., • Able to use stairwells to move from floor to floor., • Able to lift or position materials greater than 50 pounds with assistance or assistive devices; requesting assistance is expected., • Required in positioning and moving furniture, equipment, and construction materials., • Considerable twisting, bending, stooping, kneeling and reaching during many aspects of job duties., • Motor coordination and manual dexterity., • Able to hear changes in pitch necessary to recognize normal and not normal mechanical sounds., • Able to use one or both hands for grasping, pushing/pulling and fine adjustments to perform procedures., • Able to feel vibrations and temperature changes., • Near acuity: clarity of vision at 20 inches or less, with 20/40 vision or better with or without correction., • Far acuity: clarity of vision at 20 feet or more, with 20/40 vision or better with or without correction. Risk Exposure: High FLSA Statement: This position is classified as non-exempt under the Fair Labor Standards Act (FLSA). Employees in non-exempt positions are entitled to receive overtime pay for any hours worked over 40 in a workweek in accordance with state and federal regulations. EEO Statement: Touchette Regional Hospital is an equal opportunity employer and is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, or any other characteristic protected by applicable federal, state, or local laws. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Make an impact by joining ServiceSource, a champion for people with disabilities. Explore new opportunities! ServiceSource is an organization of talented people who drive innovation, embrace change, and serve humanity. Job Summary The Facility Electrical Engineer III Project Manager will be subject matter expert for all aspects of electrical engineering at the site. Creates small capital improvement, repair contracts, and building models using AutoCAD and Revit. Assists operations with electrical equipment and distribution systems trouble-shooting and recommendations. The role is also instrumental for campus facilities and data center project engineering and project management. Primary Duties Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. These duties and responsibilities will be rated on the Annual Performance Review: * Define and execute capital projects for facility repair and upgrades to ensure safe and efficient plant operations. Prepare maintenance, repair, construction technical drawings, specifications of mechanical/electrical systems, facility diagrams, or topographical maps to ensure that installation and operations conform to standards and customer requirements. * Provide technical support to Data Center Services and Operations teams to define electrical system design requirements for multiple data center projects from inception through completion * Direct or coordinate construction, installation, maintenance, support, documentation, or testing activities to ensure compliance with specifications, codes, or customer requirements. * Operate Revit Building Information Modelling and computer-assisted engineering or design software or equipment to perform engineering tasks and facility modeling. * When asked, own and manage site-level power system issues during daily operations, corrective maintenance, and capital equipment project execution phase. Identify and resolve issues with cross-functional teams, maintain all data center related electrical system design requirements and interface documents. Additional Responsibilities * Perform detailed calculations to compute and establish manufacturing, construction, or installation standards or specifications. * Oversee project production efforts and manage changes to assure projects are completed on time and within budget. * Develop and review equipment, material specifications, and bid documents. Evaluate bid proposals and prepare recommendation for the award. Review invoices, approve of technical submittals, monitor delivery schedules, and manage all technical changes. * Developing and managing the budgets from forecasting throughout the project lifecycle. * Assure that equipment and material meet the specification requirements. Submit, review, and approve vendor drawings and data. * Develop construction/electrical drawings applying professional drafting techniques using AutoCAD and/or REVIT following approved layer/file standards provided. * Implement and comply with Configuration Management Policy. * Provide technical assistance to the construction staff and maintenance contractors on clarification of design. Provide field staff with technical input on design changes required during construction. * Implement and comply with Project Management's Construction Inspection/Monitoring program. * Work with Management and Government Customers to determine specific facility and production needs in the areas of Engineering and Maintenance support. * Maintain a standardized maintenance manual that meets ISO standards. * Becomes proficient in the understanding of the National Electrical Code (NEC), as well as the following software: AutoCAD, Revit, and other Building Information Software. * Support professional development of less experienced engineers and provide engineering guidance. * Perform other related responsibilities as assigned. Qualifications: Education, Experience, and Certification(s) * Bachelor's degree in Electrical Engineering from a school accredited by the Accreditation Board for Engineering and Technology (ABET) required. * Registered Professional Engineering License is a plus. * 10 years electrical engineering experience in large commercial buildings or industrial environment preferred. * Preference given to those with knowledge and experience working with and trouble-shooting of: • Electrical distribution systems ranging from 480V to 12.47 kV, including substations and paralleling equipment., • PLC control systems for process and equipment control as well as associated HMI graphics., • Large DC and AC motor drives control systems which utilize power electronics for variable speed control., • Electrical systems in a commercial administrative or data center facility environment., • Knowledge of arc flash hazards analysis, PPE, and OSHA standards. Complete proficiency with Microsoft Office programs is required. * Revit, AutoCAD, MS Project, CMMS systems, BIM, Builder highly desirable. * Other EE related software experience a plus. * Five years of hands-on experience with residential, commercial, or industrial electrical systems. * Expert knowledge and familiarity with the National Electric Code (NEC) and NFPA electrical standards * PE or EIT certification preferred. * Ability to obtain and maintain a Top Secret/SCI government security clearance with polygraph is required. Knowledge, Skills, and Abilities * Ability to develop complex engineering specs and perform intricate studies. * Aware of changes and advancements in the industry and develop industry-wide expertise. * Strong negotiating skills, excellent presentation, and interpersonal skills. * Strong problem-solving skills focused on the results of data rather than on the data analysis procedures. * Willingness to enter confined spaces and climb/scale power system apparatuses is required. * Work independently and as a contributing member of a team with a high level of integrity and personal accountability. * Ability to read and comprehend simple instructions, short correspondences, and memos, labels, and numbers. * Excellent customer service skills, verbal and written skills, and ability to accept and follow directions. * Ability to multi-task, organize, prioritize, and meet deadlines daily. Supervision Received The incumbent normally receives little instruction on day-to-day work and receives general instructions on new assignments. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; reach with hands and arms; and talk or hear. The employee is occasionally required to walk and sit. The employee may occasionally lift or move products and supplies, up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually quiet. What We Offer - for Benefit Eligible Employees May Include: Because ServiceSource hires the best people, we work hard to provide benefits that make their lives better, so we offer a comprehensive benefit program which features: * Health coverage for you and your family through Medical, Dental, and Vision plans. * Financial protection with 100% company paid Disability, Life, Accidental Death & Dismemberment insurance. * A 403(b)-Retirement plan in which the company matches dollar for dollar on a generous percentage matching up to 3% of your contribution. * *Tax advantages through Flexible Spending and Health Savings accounts that allow you to pay for specific healthcare and dependent care expenses with pre-tax dollars. * To help you manage your work and life needs, we offer an Employee Assistance Program, Wellness Program, and Tuition Assistance. A generous paid time-off program in which the benefits increase based on your tenure with the company. We are an Equal Employment Opportunity Employer, making employment decisions without regard to a person's race, color, religion, sex (including pregnancy, sexual orientation, gender identity and transgender status), national origin, age (40 or older), veteran status, disability, or any other protected class. We are an E-Verify Employer and a drug-free workplace. Pre-employment background checks are required for all employment positions. PAY TRANSPARENCY POLICY STATEMENT: The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information

Job Description Job Description: Crysalis Biosciences, Inc. is seeking to hire multiple skilled process operators. Our process operators are responsible for the operation of our computer-controlled process equipment, manual machinery, evaluation of process problems that may arise, and documenting process parameters. In addition, you will be a vital part of the team to help ensure maximum production quantity and quality, while supporting the policies, goals, and objectives of the company. We are hiring multiple positions to cover front-end, backend, dryer, centrifuge, and lead operator positions. Key Responsibilities: * Monitor and control plant operations. * Constantly review the plant operation, control the process, ensure quality product is produced, anticipate and solve problems, and help identify opportunities for improvement. * Participate in projects to improve efficiency and/or reduce operating costs. * Maintain records of key production variables (including production volume, yield, plant uptime, and utility consumption) * Collaborate and effectively communicate with QA to ensure effective participation in QA programs related to sampling and testing process streams and products * Ensure compliance with all standard operating procedures (SOPs) and safety procedures. * Coordinate with maintenance to ensure timely repair work by assisting in diagnosing and troubleshooting any maintenance issues. * Participates in safety, health, and environmental programs. * Maintain compliance with any applicable city, county, state, and federal regulations relating to operations. * Ensures plant cleanliness and monitors use/inventory of process chemicals and supplies. Qualifications & Experience: * High School diploma required; post-secondary education or technical trade certificate is an asset. * Experience operating a dry-mill ethanol plant is preferred. * Computer Skills: Ability to work effectively with the plant’s Distributed Control System (DCS); proficiency with standard office software is an asset. Skills & Technical Requirements: * Excellent verbal and written communication skills. * Experience with operation monitoring and computer control systems. * Quality control analysis. * Critical thinking and problem-solving. * Ability to monitor and ensure safe equipment operation. * Understanding of basic process safety Physical Requirements: * Must regularly lift or move up to 50 lbs and be able to climb ladders and work at elevations up to 175 feet. * Must be able and willing to work safely, including wearing and using task-specific appropriate personal protective equipment. Company DescriptionBiomanufacturing facility intended for the production of low-carbon fuels and renewable industrial materials. The company transforms existing industrial infrastructure into advanced biorefineries that use sustainable biomass feedstock and microbial fermentation to produce ethanol and co-products such as biogenic CO2, distillers' grains, and protein-rich syrups, helping the energy and materials sectors move toward lower-emission, circular production systems.Biomanufacturing facility intended for the production of low-carbon fuels and renewable industrial materials. The company transforms existing industrial infrastructure into advanced biorefineries that use sustainable biomass feedstock and microbial fermentation to produce ethanol and co-products such as biogenic CO2, distillers' grains, and protein-rich syrups, helping the energy and materials sectors move toward lower-emission, circular production systems.

Make an impact by joining ServiceSource, a champion for people with disabilities. Explore new opportunities! ServiceSource is an organization of talented people who drive innovation, embrace change, and strengthen communities. Job Summary This position is responsible to provide facility engineering, project management, construction and renovation services and support of daily facility operations, space renovations, and repair projects. This shall include, but is not limited to energy management, decommissioning, Building Automation System (BAS) administration and operation, Computer Aided Design & Drafting (CADD), and Building Information Modeling/Management (BIM) efforts in support of daily facility operations, maintenance technical support, and project development as well as project management and execution services Primary Duties Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. These duties and responsibilities will be rated on the Annual Performance Review: * Define and execute capital projects for facility repair and upgrades to ensure safe and efficient plant operations. Prepare maintenance, repair, construction technical drawings, specifications of mechanical/electrical systems, facility diagrams, or topographical maps to ensure that installation and operations conform to standards and customer requirements. * Provide maintenance engineering expertise for all facilities and act as Subject Matter Expert for engineering and equipment support. Define mechanical system design requirements for base operating support projects from inception through completion. * Operate computer-assisted engineering or design software or equipment to perform engineering tasks and facility modeling * Direct or coordinate construction, installation, maintenance, support, documentation, or testing activities to ensure compliance with specifications, codes, or customer requirements. * When asked, own and manage site-level Mechanical/HVAC/Plumbing systems issues during daily operations, corrective maintenance, and capital equipment project execution phase. Identify and resolve issues with cross-functional teams, maintain all data center related electrical system design requirements and interface documents. Additional Responsibilities * Prepare specifications for purchases of materials or equipment. * Perform detailed calculations to compute and establish manufacturing, construction, or installation standards or specifications. * When asked, review mechanical contractor trend analysis and other reports. Develop capital improvement assessments and recommendations. * Develop and review equipment, material specifications, and bid documents. Evaluate bid proposals and prepare recommendation for the award. Review invoices, approve of technical submittals, monitor delivery schedules, and manage all technical changes. * Developing and managing the budgets from forecasting throughout the project lifecycle. * Assure that equipment and material meet the specification requirements. Submit, review, and approve vendor drawings and data. * Develop construction/electrical drawings applying professional drafting techniques using AutoCAD and/or REVIT following approved layer/file standards provided. * Implement and comply with Configuration Management Policy. * Provide technical assistance to the construction staff and maintenance contractors on clarification of design. Provide field staff with technical input on design changes required during construction. * Implement and comply with Project Management's Construction Inspection/Monitoring program. * Work with Management and Government Customers to determine specific facility and production needs in the areas of Engineering and Maintenance support. * Maintain a standardized maintenance manual that meets ISO standards. * Becomes proficient in the understanding of the National Electrical Code (NEC), as well as the following software: AutoCAD, Revit, and other Building Information Software. * Support professional development of less experienced engineers and provide engineering guidance. * Perform other related responsibilities as assigned. Qualifications: Education, Experience, and Certification(s) * Bachelor's degree in Mechanical Engineering from a school accredited by the Accreditation Board for Engineering and Technology (ABET) required. * Registered Professional Engineering License is preferred. * At least 5 years mechanical engineering experience in large commercial buildings or industrial environment preferred. * Minimum of 3 years in project management required. * Preference given to those with knowledge and experience working with and trouble-shooting of: Autodesk Certified Professional (ACP) certifications in REVIT for Mechanical (Architectural, Electrical and Civil are a plus) REVIT 2-5 years' experience Navisworks 2-5 years' experience Civil 3D working knowledge RS Means working knowledge Microsoft Project working knowledge Historical Preservation working knowledge Construction Means and Methods experience 2 years preferred Building Controls/Systems 2 years' experience preferred * Professional Engineer (PE) preferred. * Project Management Professional (PMP) certification preferred. * Ability to obtain and maintain a Top Secret/SCI government security clearance with polygraph is required. Knowledge, Skill and Abilities * Ability to communicate effectively and clearly * Must be self-motivated and a great team worker * Ability to develop complex engineering specs and perform intricate studies. * Aware of changes and advancements in the industry and develop industry-wide expertise. * Understand how NGA interacts with outside organizations, including other utilities and regulatory agencies, and with its customers. Familiar with NGA budgets, costs, rate structures, and policies. * Excellent presentation and interpersonal skills. Strong negotiating skills. * Strong problem-solving skills focused on the results of data rather than on the data analysis procedures. In some cases, these problems may be associated with the ServiceSource generation and transmission of electricity safely, at the lowest cost, or in developing expanded capabilities and services for customer. * Willingness to enter confined spaces and climb/scale power system apparatuses is required. * Ability to read and comprehend simple instructions, short correspondences, and memos, labels, and numbers. * Ability to effectively present information in one-on-one and small group situation to customers, clients, and other employees of the organization. * Excellent customer service skills, verbal and written skills and ability to accept and follow directions. * Basic typing skills; Working knowledge of Microsoft Office (Word, Excel, Outlook). * Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. * Ability to multi-task, organize, prioritize, and meet deadlines on a daily basis. * Working knowledge of AutoCAD, REVIT, BIM, and Builder. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; reach with hands and arms; and talk or hear. The employee is occasionally required to walk and sit. The employee may occasionally lift or move products and supplies, up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually quiet. Required Training 1. New Hire Orientation, 2. Sexual Harassment Prevention Training (Renewed Annually), 3. Ethics in the Workplace (Renewed Annually), 4. Emergency Preparedness Training Rewed Annually), 5. Customer Service, 6. Workplace Safety, 7. Additional NGA & SSI trainings may be assigned What We Offer - for Benefit Eligible Employees May Include: Because ServiceSource hires the best people, we work hard to provide benefits that make their lives better, so we offer a comprehensive benefit program which features: * Health coverage for you and your family through Medical, Dental, and Vision plans. * Financial protection with 100% company paid Disability, Life, Accidental Death & Dismemberment insurance. * A 403(b)-Retirement plan in which the company matches dollar for dollar on a generous percentage matching up to 3% of your contribution. * Tax advantages through Flexible Spending and Health Savings accounts that allow you to pay for specific healthcare and dependent care expenses with pre-tax dollars. * To help you manage your work and life needs, we offer an Employee Assistance Program, Wellness Program, and Tuition Assistance. * A generous paid time-off program in which the benefits increase based on your tenure with the company. We are an Equal Employment Opportunity Employer, making employment decisions without regard to a person's race, color, religion, sex (including pregnancy, sexual orientation, gender identity and transgender status), national origin, age (40 or older), veteran status, disability, or any other protected class. We are an E-Verify Employer and a drug-free workplace. Pre-employment background checks are required for all employment positions. PAY TRANSPARENCY POLICY STATEMENT: The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information

Job Description: Joining The American Red Cross is like nothing else - it's as much something you feel as something you do. You become a vital part of the world's largest humanitarian network. Joining a team of welcoming individuals who are exceptional, yet unassuming. Diverse, yet uncompromising in unity. You grow your career within a movement that matters, where success is measured in people helped, communities made whole, and individuals equipped to never stop changing lives and situations for the better. When you choose to be a force for good, you'll have mentors who empower your growth along a purposeful career path. You align your life's work with an ongoing mission that's bigger than all of us. As you care for others, you're cared for with competitive compensation and benefits. You join a community that respects who you are away from work as much as what you do while at work. Where Your Career is a Force for Good! WHAT YOU NEED TO KNOW: As an IRL Technologist at the Red Cross you will perform basic and advanced donor and patient tests and interpret results to determine donor-recipient compatibility. You will resolve compatibility problems; provide intermediate reference and consultation services to hospitals and transfusion services. WHERE YOUR CAREER IS A FORCE FOR GOOD Key Responsibilities: • Resolving compatibility problems, and providing complex reference and consultation services to hospitals and transfusion services., • Performing automated and manual test procedures on blood samples., • Managing receipt, coordination, shipment, and transport of patient and donor blood samples and documenting supply and equipment problems., • Managing reagent inventory (ordering, receiving, inspection and preparation)., • Recognizing/resolving testing irregularities and assisting other Medical Technologists in problem resolution., • Consulting with staff at other medical facilities, to resolve complex serologic problems and providing special units to transfusion recipients., • Performing manufacturing duties associated with special blood products, if applicable., • Perform other related duties as necessary. Standard Schedule: Monday - Friday, 11P-7:30A (3rd Shift) OR 7P-7A, Saturday - Sunday, and any other week day of choice (Baylor Shift) WHAT YOU NEED TO SUCCEED: • MT (ASCP) certification required, • Bachelor's degree in Biological Science or Chemistry, • Minimum 1 year of related experience or equivalent combination of education and related experience required. MLT (ASCP) certification with 4 years of general laboratory experience can be substituted., • One year of experience, • Licensure if required by state, • Good written and verbal skills to communicate effectively with internal and external customers., • Ability to work on a team. WHAT WILL GIVE YOU THE COMPETITIVE EDGE: • BB (ASCP), • Blood Banking experience is preferred Physical Requirements: Requires standing, stretching, stooping and bending for extended time periods. Lift, pull, push and move objects of up to 50 pounds. May work in walk-in refrigerator/freezers for periods of time. Required to wear protective clothing such as lab coats, gloves, face shields, etc. Ability to use a wide variety of lab or medical equipment. BENEFITS FOR YOU: As a mission-based organization, we believe our team needs great support to do great work. Our comprehensive package includes: • Medical, Dental Vision plans, • Health Spending Accounts & Flexible Spending Accounts, • PTO: Starting at 15 days a year; based on type of job and tenure, • Holidays: 11 paid holidays comprised of six core holidays and five floating holidays, • 401K with up to 6% match, • Paid Family Leave, • Employee Assistance, • Disability and Insurance: Short + Long Term, • Service Awards and recognition The American Red Cross is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, San Diego Fair Chance Ordinance, the California Fair Chance Act and any other applicable state and local laws. AmeriCorps, the federal agency that brings people together through service, and its partners - the Peace Corps, AmeriCorps Alums, National Peace Corps Association, and the Service Year Alliance - launched Employers of National Service to connect national service alumni with opportunities in the workforce.American Red Cross is proud to be an ___ partner and share our employment opportunities with the network of organizations. Interested in Volunteering? Visit___ to learn more, including our most-needed volunteer positions. To view the EEOC Summary of Rights, click here: ___

Responsibilities Overall Assignment Description: Mid-level Test Systems Engineers perform Application, System and Integration Testing across the National System of Geospatial-intelligence (NSG), Allied System of Geospatial-intelligence (ASG) and Federal Agencies to ensure timely and accurate GEOINT. Duties include: • Performs test and evaluation across the National System of Geospatial-intelligence (NSG), Allied System of Geospatial-intelligence (ASG) and Federal Agencies., • Performs testing of applications and application programming interfaces (APIs) in DevOps pipelines utilizing quality assurance measures established by the government and industry best practices., • Performs independent integration testing on the system software or hardware to determine the system's compliance with specified requirements., • Plans and executes manual tests, and automated test scripts using scripting and programming languages. Required: • Bachelor's degree or higher in Engineering, Computer Science, Information Technology, Management Information Systems, or related STEM degree program, or 6+ years of experience as a Test Systems Engineer., • 6+ years of test management and defect tracking tools., • Experience with traditional, Agile, and DevOps development practices and associated testing strategies., • TS/SCI clearance adjudication or ability to obtain SCI and pass a polygraphDesired:, • Master's degree in Computer Science, Information Technology, Management Information Systems, or related STEM degree program., • Experience with three or more of the following; JMeterand, Jenkins, Docker, Postman, Swagger, Nexus, Apigee or GitHub/GitLab (or equivalent software packages), Java, Bash, Curl, XML, JSON, SQL, Python, Javascript, and AWS and C2S., • Working knowledge of Model Based Systems Engineering, processes, tools and languages. Peraton is a next-generation national security company that drives missions of consequence spanning the globe and extending to the farthest reaches of the galaxy. As the world's leading mission capability integrator and transformative enterprise IT provider, we deliver trusted, highly differentiated solutions and technologies to protect our nation and allies. Peraton operates at the critical nexus between traditional and nontraditional threats across all domains: land, sea, space, air, and cyberspace. The company serves as a valued partner to essential government agencies and supports every branch of the U.S. armed forces. Each day, our employees do the can't be done by solving the most daunting challenges facing our customers. Visit peraton.com to learn how we're keeping people around the world safe and secure. Target Salary Range $86,000 - $138,000. This represents the typical salary range for this position. Salary is determined by various factors, including but not limited to, the scope and responsibilities of the position, the individual's experience, education, knowledge, skills, and competencies, as well as geographic location and business and contract considerations. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. EEO EEO: Equal opportunity employer, including disability and protected veterans, or other characteristics protected by law.All

Job Description Title: Product Assistant (Manufacturing Tech 1) This role is on 2nd shift: Monday to Friday 2pm-10:30pm Training will be on 1st shift: 6am-2:30pm for 2-3 months SAP experience Punctuality Experience with troubleshooting on an assembly line, setting up packaging/getting it ready and making sure it works, testing lab equipment, cleaning materials and parts, pallet jack experience Physical is required Steel Toed Shoes are required Must be clean shaved Stable job history, longevity, no job hopping. Purpose of the position: Manufacture products according to established protocols and perform operations in support of the group, department and company. Note: This is Not a warehouse position. Essential Job Functions Operate processing equipment: COP (clean out of place) CIP (clean in place) Kaps All Torquer Label line Perform production operations Routine cleaning of rooms Monthly pheonlic cleaning of rooms Waste disposal Manual cleaning of small parts Pulling bottles from inventory Bottle pass through to Class 100 clean room Hand torque and torque testing Application of pinch clamps Packaging of bags/bottles CIP Bag Fill Line Communicate and document the status of processes, products, and equipment. Communicate the status of production operations/equipment and bring deviations to the attention of the supervisor. Be able to execute batch records in SAP (eBR) Ensure all applicable log books have been filled out completely as required by current procedures Perform operations in compliance with rules and in a safe, orderly manner. Follow production procedures and safety policies at all time. Use, clean, and store all personal protective gear appropriately Label all in-process equipment and containers properly. Take the necessary action to resolve any unsafe conditions. Participate in required safety and quality training and other related activities. Maintain good housekeeping in manufacturing and working areas Basic Qualifications: Education: High School Diploma or equivalent Essential and Critical Skills: Communication skills, oral and written Computer skills (SAP) Mechanical skills Troubleshooting skills Interpersonal skills Organizational skills Additional local needs: Production environment. Require occasional lifting and pushing of up to 50 pounds. May require shift work, including 8/10/12 hour day/night schedules working during various days of the week Must be able to perform tasks while wearing personal protective equipment, including respirators, for an extended time Interviews will be conducted onsite.

Description Leidos Intelligence Sector combines technology-enabled services and mission software capabilities in the areas of cyber, logistics, security operations, and decision analytics to support our defense and intel customers' mission to defend against evolving threats around the world. Our team's focus is to ensure our customers have the right tools, technologies, and tactics to keep pace with an ever-evolving security landscape and succeed in their pursuit to protect people and critical assets. The Geospatial Analyst Solutions Directorate, part of the National Solutions Business Area, is currently seeking a highly motivated Senior Test Engineer for the Maru program, a critical initiative focused on modernizing geospatial processing and exploitation mission software. We are seeking a detail-oriented Manual Tester to support quality assurance efforts across web applications, APIs, and microservices within an agile development environment. This role focuses on executing manual test cases,identifyingdefects,validatingsystem functionality, and ensuring software meets functional and performance requirements prior to release. The ideal candidate has strong experience in manual software testing, requirements analysis, and defect tracking. This individual will work closely with developers,DevSecOpsengineers, product owners, and other stakeholders to ensure high-quality, reliable software delivery. TS/SCI with the ability to obtain a Polygraph Primary Responsibilities: * Test Planning & Execution:Develop, document, and execute manual test plans, test cases, and test scripts based on system requirements and user stories. * Functional Testing:Perform functional, regression, integration,andsmoketesting. * API Validation:ValidateRESTful APIs usingthe availabletools. * Defect Management:Identify, document, track, and verify defects. * Requirements Analysis:Analyze system requirements and user stories to ensure complete test coverage andidentifyedge cases. * Test Documentation:Maintaintraceability matrices, test artifacts, and supporting documentationin accordance withprogram standards. * Collaboration:Work closely with developers and cross-functional teams to clarify requirements, reproduce issues, andvalidatefixes. Basic Qualifications: * US citizenship is required per contract. * Bachelor's degree in Computer Science, Engineering, or related field with 8-12 years of relevant experience; orMaster'sdegree with 6-10 years of relevant experience. * 4+ years of experience in software quality assurance and manual testing. * Strong experience developing and executing manual test cases. * Experience testing web-based applications and RESTful APIs. * Familiarity with defect tracking tools and test management systems. * Working knowledge of RESTful services, HTTP, JSON, and web application workflows. * Strong analytical, troubleshooting, and documentation skills. * Excellent written and verbal communication skills. Preferred Qualifications: * Exposure to automated testing frameworks (e.g., Playwright, Cypress, Selenium). * Familiarity with CI/CD pipelines and release processes. * Familiarity with security or compliance-focused testing practices. #MARU If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. May 12, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $92,300.00 - $166,850.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Job DescriptionCompany Description At Midwest Veterinary Laboratory we are dedicated to providing accurate and quality animal health testing and excellent customer service at cost-effective prices. To learn more about us click here. Job Description We are looking for a qualified Full-time Laboratory Technician or Veterinary Technician to undertake a variety of laboratory procedures in a clinical setting. You will be handling sensitive equipment to analyze animal samples and/or substances. The ideal candidate will have experience working with animal samples. He/she will be well-trained to maintain safety conditions and will be passionate in doing work that makes things move forward. The goal is to optimize lab procedures and succeed in producing reliable and important results. Duties include: • Process blood samples including the ability to read a manual differential, • Perform and interrupt Urinalysis, • Perform and interrupt fecal flotations, • Log and distribute incoming samples of materials, • Follow established procedures and regulations, • Notify proper personnel when a known spec is out of compliance, and send all production results to the QC department, • Document activities legibly in notebook(s) before summarizing them on lab report sheet, • Calibrate/standardize instruments when and where needed, • Maintain a clean uncluttered work area, • Attend all required safety training and follow all safety policies and procedures, • Perform other duties or special projects as assignedQualifications, • Proven experience as Lab Technician or relevant position (preferably someone who has previous experience with animal samples), • Experience in operating electrical and nonelectrical laboratory equipment, • Ability to read manual differentials, perform Urinary Analysis, experience with microbiology, and ability to detect intestinal parasites – REQUIRED, • Excellent physical condition and endurance, • Working knowledge of MS Office (especially Excel) and database systems, • Ability to work autonomously and under pressure, • Degree in animal science, biology, chemistry, or relevant field – Preferred, • Will be able to present information through oral or written communication effectively. Job Type: Full-time Compensation: Starting at $18 per hour or higher, depending on Additional Information We offer our staff: • Comprehensive Benefits (health, dental, vision, liability, 401k & 401K matching program, life & supplemental insurance, HSA, & FSA), • Paid Vacation and Sick Time for ALL Employees, • Paid Bereavement Program, • Paid Parental Leave Program, • Competitive Compensation, • Continuing Education Allowance (applies to licensed/registered/certified roles), • Career Development Opportunities, • Additional Benefits May Also Be Available (i.e. Personal Pet Discounts, Holiday Pay, Uniform Allowance, Bonuses etc) For additional details including our full equal opportunity statement, texting/outreach communication authorization, physical requirements of the job and more, please visit

It's more than a career, it's a calling. MO-SSM Health Monteleone Hall Worker Type: PRN Job Highlights: This position will administer 2 to 4 hours of cognitive testing evaluations with mostly Adult (sometimes teen) patients with a variety of medical, neurological, psychiatric disorders. Job Summary: Provides comprehensive psychometric services. Job Responsibilities and Requirements: PRIMARY RESPONSIBILITIES * Provides neuropsychological and psychological testing under the supervision of a licensed psychologist. * Documents behavioral observations of patients during testing. * Administers and scores psychological and neuropsychological tests as appropriate based on the administration manual for each testing tool. * Enters test results into the patient database at the conclusion of each testing session and notifies the supervising clinician of testing results. * Acts as a resource person or consultation-liaison for physicians, staff, and patients regarding mental or behavioral health issues. * Works in a constant state of alertness and safe manner. * Performs other duties as assigned. EDUCATION Frequent reaching, sitting, standing and walking. * Frequent use of vision and depth perception for distances near (20 inches or less) and far (20 feet or more). * Frequent use of hearing and speech to share information through oral communication. Ability to hear alarms, malfunctioning machinery, etc. * Frequent keyboard use/data entry. * Occasional bending, stooping, climbing, twisting and gripping. * Occasional lifting/carrying and pushing/pulling objects weighing 0-25 lbs. * Occasional use of vision to identify and distinguish colors. * Occasional driving. * Rare repetitive foot/leg and hand/arm movements and squatting. REQUIRED PROFESSIONAL LICENSE AND/OR CERTIFICATIONS 4890250235 SLUCARE PSYC M HALL Work Shift: Day Shift (United States of America) Scheduled Weekly Hours: 0 Benefits: SSM Health values our exceptional employees by offering a comprehensive benefits package to fit their needs. * Paid Parental Leave : we offer eligible team members one week of paid parental leave for newborns or newly adopted children (pro-rated based on FTE). * Flexible Payment Options: our voluntary benefit offered through DailyPay offers eligible hourly team members instant access to their earned, unpaid base pay (fees may apply) before payday. * Upfront Tuition Coverage : we provide upfront tuition coverage through FlexPath Funded for eligible team members. Explore All Benefits () SSM Health is an equal opportunity employer. SSM Health does not discriminate on the basis of race, color, religion, national origin, age, disability, sex, sexual orientation, gender identity, pregnancy, veteran status , or any other characteristic protected by applicable law. Click here to learn more. ()

About the Company Visory Health is growing! Come work for an industry leader in the health technology field. At Visory Health, we apply our unique & in-depth healthcare knowledge to create healthcare access for retail pharmacies, physicians, and consumers. We are looking for a QA Lead to support members of our team in completion of technology projects that uphold our business initiatives. Visory Health is leading the market shift to cash in healthcare by developing proprietary technology, analytics, and consumer engagement platforms that allow consumers to access lower cost prescription medicines. We're doing healthcare differently. At Visory Health, we believe that no one, especially women, families, caregivers, and underserved communities should have to go without lifesaving medication. Our healthcare system is complicated, and we want to cut through that noise by bringing better prescription prices to everyone. That's why we developed the Visory Health Prescription Savings Card. We're women-owned, women-led, and we're just getting started! About the Role This role is ideal for someone who can manage QA team members while also driving high-level testing strategy, process improvements, and quality standards across the organization. Although this role is primarily remote, some in-office training and occasional visits to our St. Louis office may be required. Responsibilities • Manage the QA team, including assisting with prioritization and allocation of QA resources, • Establish and enforce QA standards, best practices, and expectations across the team, • Work with the development team to develop, publish, and update the project plan., • Track issues found while testing and collaborate with the development team on how to resolve., • Communicate directly with stakeholders on issues found and their impacts to a planned deployment., • Perform high-level, exploratory, and end-to-end testing on complex or critical features, • Validate automation workflows across systems, • Identify testing gaps and quality risks that may not be covered by standard test cases Qualifications • 3+ years of experience in Quality Assurance, • Proven experience managing or leading QA teams, • Excellent communication and interpersonal skills, including the ability to speak with all levels of employees, vendors and team members, • Flexible, as priorities can change quickly, day-to-day and even hour-to-hour, • Keen attention to detail and efficient problem-solving skills, • Knowledge of CI/CD practices, • Experience creating and executing detailed and complex manual and automation testing scenarios., • Solid understanding of system integrations, data validation testing, and UAT coordination, • Previous experience working with Jira, Azure DevOps, or similar tools Required Skills • Healthcare/Health Technology experience, • Previous experience working with database testing and post SQL, • Previous experience with Detox, Playwrite, Selenium, and/or Appium., • Previous experience with Typescript, ReAct Native and/or Javascript. Visory Health is an equal opportunity employer and values diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you have any questions about this, please contact us. Awards • Inc. 5000 2023, 2022, 2021. Awarded to the fastest growing private companies in America., • St. Louis Business Journal Best Places to Work 2023, • Top 50 Inspiring Workplaces (awarded by NOAM) 2022, • Inc. Magazine Best Places to Work 2022

Job DescriptionSalary: $28 to $30 /hr. Raineri Construction is seeking a professional Dump Truck Driver to join our growing team (Experienced Only). To qualify for the position, you must be fluent in operating a manual transmission and also hold a valid Class A or B CDL. This position pays an excellent hourly starting base rate: CDL B - $28/hr. CDL A - $30/hr., based on experience, plus benefits. *If you do not have a resume to submit, click on this link to use Indeed' s free resume builder to easily create and download a resume: Resume Builder Raineri Construction is a full-service general building contractor specializing in design-build construction. Raineri provides turnkey project development services and comprehensive construction and management solutions for a variety of industries. Based in St. Louis, the company has grown each year since its inception in 2003 and currently employs more than 100 employees. Long-term, mutually beneficial employment relationships are important to the company, and its benefits package currently includes: • 100% of the employee's health insurance premium is paid by the company, • Company-funded Employee Assistance Program, • Company-funded Group Life Insurance, • Paid vacation, • 401(K) Retirement Plan, with a company match of 4%, • Company Profit Sharing. Essential activities may include, but are not limited to: • Safely operate a dump truck or truck/trailer combination to and from job sites., • Properly track and document the activity log, including loads and material tickets., • Report all issues and safety incidents to the Operations Manager, • Perform and document pre- and post-trip inspections., • Load and Unload Equipment and deliver to job sites. (Class A CDL), • Clean truck daily, • Turn in material/load tickets daily Qualifications/Skills Required: • Previous experience operating dump trucks with manual transmissions with air brakes., • Valid Class A or B CDL with Air Brake endorsement, • Must be able to successfully pass pre-employment & random drug screening, and a criminal background check, • Ability to handle physical workload, • Strong work ethic, • Current DOT Drug Testing is required Physical Requirements: • Able to work in all weather conditions., • Able to traverse uneven walking/working surfaces at jobsites., • Able to climb stairs at jobsites., • Able to wear all required personal protective equipment as necessary., • Able to occasionally lift up to 50 pounds. Raineri Construction is an equal opportunity employer (Minority/Female/Disabled/Veteran). Our employment practices are in accordance with the laws that prohibit discrimination against qualified individuals on the basis of race, religion, color, gender, age, national origin, physical or mental disability, genetic information, veterans status, marital status, gender identity and expression, sexual orientation, or any other status protected by applicable law. ***No Recruiters, unsolicited staffing agency inquiries, or referrals please.

Job Description A leading geotechnical engineering firm in the St. Louis metro area seeks an Engineering Field Technician - Construction Materials Tester (CMT) to join our growing team. This entry-level position provides on-the-job training for candidates interested in construction quality control and materials testing. You'll perform field and laboratory testing on concrete, soil, asphalt, and aggregate materials across commercial and infrastructure projects throughout the region. WHAT WE OFFER (BENEFITS & COMPENSATION) • Competitive hourly compensation, • Comprehensive on-the-job training program for entry-level candidates, • Certification sponsorship including ACI, NICET, and ICC credentials, • Safety training provided: OSHA 10 Hour, CPR/First Aid, defensive driving, • Perform field quality control tests on plastic concrete including slump, air content, and cylinder preparation, • Conduct field density testing on soil, asphalt, and aggregate using nuclear density gauges, • Execute routine laboratory tests on construction materials per ASTM and AASHTO standards, • Prepare written daily field observation reports and project summary documentation, • High school diploma or equivalent required, • Valid driver's license with clean driving record and ability to operate company vehicles, • Capability to lift, push, and pull up to 50 pounds regularly, • Proficiency with commonly used computer software programs and reporting systems, • ACI (American Concrete Institute) Level I certification or ability to obtain within 6 months, • Nuclear Density Gauge (Troxler) certification and operational experience, • NICET or ICC certification is a plus, • Ability to stand and walk for extended periods throughout work shifts, • Manual dexterity to control, handle, and operate testing equipment with hands and fingers, • Physical capability to lift, push, and pull materials up to 50 pounds when necessary, • Willingness to work outdoors in all weather conditions at active construction sites, • Local travel within St. Louis metro area required; reliable transportation necessary #LP

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Flexible schedule REPORTS TO: DC Ops Manager & Asst Manager FLSA: Non-Exempt SUPERVISES: N/A Anticipated # of Tests/Year: 20-25 LOCATION: Must reside w/in 50 miles For candidates that have a phlebotomy credential not identified in the list of requirements, you can explore options through the American Certification Agency (ACA) to have your credential transferred if your training and experience meet standards. Please note this is not a guarantee and you'll want to inquire with the ACA to confirm. A valid and current phlebotomy certification that meets USADA's criteria is required in order to be eligible for this role. JOB SUMMARY: Responsible for sample collection from athletes. Tasks performed by the Doping Control Officer (DCO) include preparation for, execution of and post-collection administration as it relates to Doping Control both at events and in the out-of-competition setting. DCOs are the field facing representatives of USADA. The primary objective of the DCO is to conduct Doping Control throughout the United States, under direction of the Doping Control Operations team, for Olympic, Paralympic, and Client Services testing teams, in support of USADAs mission and vision. The DCO works with the HQ team to uphold USADAs goals of creating and maintaining a fair and healthy environment for all athletes. The role will include both local and national travel to conduct Doping Control assignments. The following job expectations, responsibilities, and qualifications apply to both the DCO I and DCO II positions, however, in order to qualify for a DCO II level, one must have a valid phlebotomy credential in good standing, as further outlined below. A DCO II is able to serve as a doping control officer that can draw blood. RESPONSIBILITIES: • Conduct sample collection sessions in support of the testing programs for the Olympic/Paralympic, and Client Services testing teams, as well as on behalf of other agencies, when requested by USADA., • Accept, plan and manage doping control assignments, in accordance with the minimum requirements of the WADA/International Standards, and any minimum criteria established by USADA., • Execute logistics aspects as they relate to the doping control process to facilitate successful completion of missions., • Conduct doping control, including processing of Samples, in accordance with USADAs protocols and procedures, and in accordance with the WADA Code/International Standards., • Recruit and onboard independent contractors to serve in the capacity of a Chaperone*. *(Chaperones may be required in the event the athlete is a minor and/or if the gender of the DCO is not the same as the gender of the athlete being tested), • Witness sample collection or overseeing the witnessing of the sample collection process., • Travel (car, plane, train etc.) to various locations to perform sample collections (by the most economical route)., • Ensure accurate documentation/completion of the doping control process., • Ship and submit processed Samples to the specified WADA certified laboratory., • Assist in the onboarding and training of new doping control officers., • Accountable to the most current version(s) of the DCO Manual, sample collection. documentation and other training resources., • Participate in DCO evaluation and support program, continuing education and re-accreditation., • Ensure adequate control of document, record and sample collection equipment., • Schedule and manage all travel, as well as associated expense reports., • Provide witness testimony in Legal cases, such as whereabout failures, other Anti-Doping Rule Violations., • Maintain confidentiality at all times., • Have no affiliation with sample collection organizations outside of USADA., • Keep USADA aware of issues in the field and/or any conflicts of interest., • Recommend necessary updates and revisions to USADA protocol and procedures as related to Doping Control., • Excellent oral and written communication skills., • Excellent organizational skills and attention to detail., • Demonstrated high proficiency in utilizing technology such as tablets, multiple software platforms, and various applications.Demonstrated ability to:, • Make decisions in accordance with USADA's protocol and procedures., • Multitask and work accurately under pressure., • Interact with internal and external customers professionally and in line with USADAs values., • Travel, possibly at short notice, to conduct test assignments., • Work flexible hours, as needed., • Access the internet for daily communication., • Values integrity, respect, and justice among internal and external constituents., • Perform effectively and collaboratively in a team environment., • Meet deadlines and operate with limited supervision., • Stand, bend and lift 50 pounds, on a regular basis.Certification:, • Successful completion of all USADA certification/recertification requirements., • Pass bi-annual written and practical exams., • Attend DCO training sessions, meetings, conferences., • Valid Drivers License in good standing with state requirements where you reside., • Must be fully vaccinated against COVID-19.DCO II Additional Requirements:, • *National Phlebotomy certification from one of the following accredited agencies:, • ACA- American Certification Agency (certified on/after July 2003), • AMT -American Medical Technologists (certified on/after April, 2003), • ASCP American Society of Clinical Pathology (certified on/after June, 2003), • NHA- National Healthcareer Association (certified on/after February 2005), • In addition to a current national certification, individuals will be required to ensure compliance with state specific phlebotomy training requirements for the state in which they reside., • At least 3 years phlebotomy experience, preferred.Additional Certification(s):, • Work experience in Allied Health Professions w/certification and/or License (Athletic Trainer, Physical Therapist, Registered Nurse, Paramedics, etc.)COMPENSATION & TIME COMMITMENT:, • Compensation is on a per-test basis (piece rate) for out-of-competition (OOC) missions, with compensation typically ranging from $130 to $180 per test dependent on the test parameters. OOC test sessions can vary in length but generally take 1 to 2 hours for successful completion., • In Competition (event) testing is paid at a daily flat rate, typically at $250 per day., • Onboarding is anticipated to begin in March with a more significant time commitment up front for training. Expect a time commitment of 24-30 hours of time during the first 60 days of onboarding. After that it should only be 2-3 hours of training and updates per quarter, plus the necessary time to complete test assignments.

Job Description We are seeking a reliable and compassionate Medical Assistant (MA) to join our Urgent Care team. The MA supports healthcare providers by performing clinical and administrative tasks to ensure efficient patient flow and high-quality care. This role requires excellent communication skills, strong attention to detail, and the ability to thrive in a fast-paced environment. Key Responsibilities • Patient Care, • Greet, room, and prepare patients for examination., • Record vital signs (temperature, blood pressure, pulse, respiratory rate, oxygen saturation, height, weight)., • Obtain and document patient medical history, chief complaint, and current medications., • Assist providers with examinations, procedures, and treatments (e.g., wound care, injections, splints)., • Administer medications and immunizations as directed by provider., • Perform basic laboratory testing (urinalysis, strep, flu, COVID swabs, pregnancy tests)., • Conduct phlebotomy and specimen collection, labeling, and preparation for lab processing., • Perform EKGs, vision/hearing screenings, and other diagnostic tests., • Clinical Operations, • Maintain clean, well-stocked, and organized exam rooms., • Prepare, sterilize, and maintain instruments and equipment., • Adhere to infection control and OSHA safety standards., • Support triage of walk-in patients and assist with urgent/emergent needs., • Administrative Support, • Document all patient encounters in the Electronic Medical Record (EMR) accurately and timely., • Handle patient intake, insurance verification, and consent forms as needed., • Assist with scheduling, referrals, and follow-up instructions., • High school diploma or equivalent required., • Completion of accredited Medical Assistant program., • Certification preferred: CMA (AAMA), RMA (AMT), CCMA (NHA), or NCMA (NCCT)., • CPR/BLS certification required., • Strong clinical skills including phlebotomy and injections., • Knowledge of medical terminology and EMR systems., • Ability to multitask in a fast-paced environment., • Excellent interpersonal and communication skills., • Compassionate, patient-centered care approach., • Ability to stand, walk, and move quickly for extended periods., • Lift or assist patients and equipment up to 50 lbs., • Shift Hours: 8:00 AM – 8:00 PM, • Schedule: 2–3 shifts per week, • Medical Assistants: $18–$21 per hour, depending on experience and education

Job DescriptionBethesda Brings out the Best in Talented, Caring People!At Bethesda, more than 1,200 employees dedicate their careers to improving the lives of others.As a team member at Bethesda, you'll enjoy great benefits such as: 403b, daily pay, bonuses, career advancement opportunities, and holiday pay.Medical, dental, vision, prescription, and life insurance available for regular status full and part time employees.SummaryDevelops and implements a Corporate-approved orientation program for all employees with emphasis on regulatory issues surrounding long term care (LTC) and Bethesda values and mission. Conducts General Orientation using Corporate guidelines incorporating relevant OSHA and Federal and State regulations into the program. Incorporates staff and resident safety (i.e., emergency preparedness, fire safety, security, injury prevention), and the teaching program for those staff dealing directly and indirectly with the Alzheimer resident. Coordinates and monitors orientation activities throughout orientation. Provides input into evaluation of the orientee and recommends release from or extension of orientation based on evaluation of learning needs. Assists with mentor programs. Promotes a culture of staff development by being open and encouraging about the work environment. Develops lesson plans and conducts in-service programs including mandatory in-services. Other programs are identified by needs assessment of the staff, results of State surveys, introduction of new products, services and technology. In-services new and revised policies and procedures. All onsite programs are given in sufficient number and at sufficient times to meet the needs of the staff. Teach staff basic computer skills as related to their job duties. Properly instruct staff how to access and use the online education programs as a part of the overall in-service education program. Works closely with the Director of Nursing (DON) particularly in the promotion of teamwork and quality care issues. Provides input into the appraisal process of staff, particularly during orientation. Acts as a resource for Managers relative to the department's orientation, in-service and staff development needs. As requested, conducts the state-approved Nurse Assistant Training Program or CMT program using the directions as set forth in state regulations. Classes are organized, students are monitored, and an acceptable fail/pass ratio is achieved. Acts as a resource person for the nurse assistants and monitors their progress. Develops and implements an ongoing infection prevention and control program to prevent, recognize, and control the onset and spread of infections in order to provide a safe, sanitary, and comfortable environment. Establishes facility-wide systems for the prevention, identification, reporting, investigation, and control of infections and communicable diseases of residents, staff, and visitors. Develops and implements written policies and procedures in accordance with current standards of practice and recognized guidelines for infection prevention and control. Oversees the facility's antibiotic stewardship program. Oversees resident care activities that increase risk of infection (i.e., use and care of urinary catheters, wound care, incontinence care, skin care, point-of-care blood testing, and medication injections). Leads the facility's Infection and Prevention Control Committee. Develops action plans to address opportunities for improvement. Participates on the facility's QAA Committee. Implements an annual infection control risk assessment process and participates in the facility's annual assessment review process. Reviews and/or revises the facility's infection prevention and control program, its standards, policies, and procedures annually and as needed for changes to the facility assessment to ensure they are effective and in accordance with current standards of practice for preventing and controlling infections. Provides education to staff, residents, and families (where appropriate). Ensures public health is notified of reportable diseases. Collaborates with other departments in fulfilling requirements related to occupational health and safety. (I.e. employee health). Maintains documentation of infection prevention and control program activities. Informs the DON of the individual needs of the Staff Development functions as it relates to budgeting. Assists the DON in the assessment of needs for resident care equipment during budget preparation. Is aware of and promotes the compliance program throughout the facility. Participates in the continuous quality improvement (QAPI) activities established by the organization by looking at all resident care processes with an intent to identify areas for improvement. Prepares concise and timely QAPI reports, as required. Develops educational programs based on needs identified through QAPI activities, attends various meetings and provides reports as requested. Attends local professional educator's meetings and Bethesda monthly meetings. Sets individual goals and reviews with the DON. Serves as a role model to the staff. Actively pursues education related to job. Keeps current in nursing issues (geriatrics, management, legislative.) May be assigned other duties as appropriate.Qualifications • Graduate of an accredited school of Nursing, • BSN or related baccalaureate preparation in education preferred, • Current RN license in the state that you will be working, • CPR/AED certification required or willing to obtain within six months of employment, • Certified as a CPR instructor is high desirable, • Certified as an Instructor for the Missouri Nurse Assistant Training program and CMT instructor certification preferred, • Completed specialized training in infection prevention and control through accredited continuing education, • Minimum of five years of recent clinical nursing experience required, • Educational and supervisory/management experience preferred, • Previous experience in long-term care required, • Ability to manage time and organize daily schedule to meet productivity standards, • Computer skills including Microsoft Office Suite and other programs such as EMR, • Possesses integrity, initiative, and loyalty, • Must possess good communication skills and demonstrates ability to teach adults, • Ability to stand and walk for long periods of time, • Ability to lift heavy objects using proper lifting techniques and with assistance as necessary, • Ability to transfer and move residents who vary with ability to assist weighing 200+lbs using proper lifting techniques and with assistance as necessary, • Ability to push and pull equipment weighing in excess of 40lbs using proper techniques and with assistance as necessary, • Manual dexterity, coordination and skillful use of hands when working with residents and equipment, • Ability to perform necessary documentation, • Visual acuity, • Must be able to manage a diversity of activities, • Good organization, critical thinking, problem solving, and mentoring skills, • High degree of ability in using tact, diplomacy and discretion, • Must be able to concentrate with frequent interruptions and multiple distractions, • A preference for understanding and responding to the physical and psychosocial needs of the geriatric population requiredPay range: $63,943 - $106,407 annuallyCategory: RN

Job Description The Assistant Property Manager supports the Property Manager(s) and others in managing all aspects of a single property or portfolio of commercial, industrial, or retail properties including marketing, operations, and financial activities. Essential Duties and Responsibilities: • Ensure services are provided consistent with policies, procedures, regulations, and contractual obligations and standards., • Review and recommend approvals for accurate payment of vendor invoices following the terms of the management agreement, LPC policies, and property management approval authorization limits., • Assist Property Manager(s) in preparing and delivering timely, accurate, and complete monthly reports and budget packages according to client requirements., • Assist in collecting data and/or drafting tenant rent and Common Area Maintenance (CAM) reconciliations or Escalation (OpX) recovery charges., • Assist, and coordinate with, lease administration and accounting on all lease administration activities including lease set up, lease changes, reporting, etc. using various company or client systems., • Assist in coordinating tenant move-ins and move-outs, and "walks-through" spaces with Property Manager(s), tenants, and tenant improvement department; maintain vacant spaces in "tour ready" condition., • Administer and process annual tenant survey., • Respond to tenant needs, ensuring that administrative and building technical staff resolve problems promptly., • Maintain building reports such as leasing activity, building square footage, stacking plans and floor plans, capital expendital/tenant improvement records., • Coordinate contract documents, purchase orders, and other documents related to procuring goods and services at the property; assist in coordinating vendor deliveries and property services., • Assist with bidding activities., • Review tenant billings for accuracy and approval; review aging reports and collections efforts., • Assist in performing regular property inspections; recommend alterations, maintenance, and reconditioning; work with contractors/vendors., • Assist with developing plans, and preparing for, emergency response using company or client formats; ensure resources, supplies, and backups are in place to effectively recover from adverse events; assist in organizing drills and other training., • Contribute through thoughtful and proactive execution of clearly defined duties, methods, and tasks; contribute to team performance through suggestions to improve systems, processes, and procedures., • Assist with client communications; prepare and deliver timely, accurate, and complete reports., • Perform other duties as assigned. Qualifications: • Bachelor's degree (BA/BS) preferred with 1-2 years of related experience and/or training; or a combination of education and experience; experience with commercial office, retail, and/or industrial properties is highly preferred, • Intermediate skills with Microsoft Office Suite required; knowledge of MRI and Kardin preferred., • Ability to effectively communicate verbally and in writing with teammates, leadership team, vendors, tenants, and client employees in a straightforward, professional manner, keeping the appropriate customer(s) informed/updated as needed, • Knowledge of financial terms and principles; ability to calculate figures such as percentages, discounts, markups, and/or commissions, • Ability to comprehend, analyze, and interpret documents and solve problems involving several options in situations, • Intermediate level of analytical and quantitative skills required, • Strong organizational skills with an inquisitive and entrepreneurial mindset, • Proven track record for delivering excellent internal and external customer service; ability to successfully interact/communicate with tenants/vendors/contractors as well as teammates and leadership team, • Must possess the desire to lead and receive instruction on development of leadership skill set, • Ability to build consensus in work groups, listen actively, and create mutually beneficial resolutions, • Ability to travel daily to assigned properties as necessary, • Ability to work after hours, weekends, holidays, and during emergency situations as necessary to meet the needs of the client, • Ability to read and write English in order to understand manuals and procedures, and to write reports Physical Requirements: Ability to sit/stand/walk for long periods of time; manual dexterity to operate a computer keyboard, phone, and other office equipment; eyesight that allows for reading a computer screen, phone screen, reports, etc.; hearing that allows for hearing/understanding spoken words; lifting and carrying up to 20 lbs. NOTE: Some, but not all, of our positions may have an additional requirement to comply with COVID-19 health and safety protocols, including COVID-19 vaccination proof and/or rigorous testing. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Key Responsibilities Analyze, design, test, and deliver technology solutions while executing comprehensive QA strategies Collaborate with business stakeholders, developers, and cross-functional teams to ensure quality delivery Review requirements, user stories, and specifications to develop test sce

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo