Manual testing jobs in Tucson, ArizonaCreate job alerts

Job DescriptionSalary: Projected earnings for hourly drivers up to $70k Now hiring Class A CDL HAZMAT ACID Drivers for Marana, AZ Terminal! Hourly Pay + Bonuses = APPLY NOW..$$ Projected earnings up to $70k $500 Quarterly Safety Bonus Local & Regional Loads = More home time! This position requires drivers to load, transport, and deliver products, including sulfuric acid, and ammonium nitrate in pneumatic and tanker trailers to various mines and aggregate sites throughout Arizona and New Mexico. Drivers are typically home daily and run local and regional routes. **Acid operations are outside in the elements and require a chemical-resistant acid suit, rubber gloves, rubber boots, a full-face respirator, and any other required PPE to be worn at all times while in a Hot Zone. In addition, having to wear a full-face respirator for specific tasks, also requires that you are clean-shaven daily. We operate 24/7/365. Work schedules vary, depending on business needs. Load assignments are given based on hours of service available. Dedicated tractors are assigned, trailers are shared and slip-seating is expected. Great Benefits: • Local and Regional routes, • Weekly pay, • Quarterly Safety BONUS, • Vacation,Sick& Holiday pay, • Medical, Dental, Vision, Life & Disability benefits, • Wellness Program, • 401(k) Match CDL Truck DriverJob Requirements: • Valid Class A CDL, • Acid Hazmat Division - endorsement requirements are HAZMAT & Tank, • Minimum 23 Years of age, • 1-year experience operating a combination vehicle. Less experience will be considered on an individual basis and may require an extended training period., • Valid DOT Physical, • No more than 2 moving violations within the previous 3 years, • No major violations within the previous 5 years, • HAZMAT Drivers must wear a full-face respirator for specific tasks, which also requires that you are clean-shaven daily., • Successful respirator physical, and respirator fit test, • Ability to pass a satisfactory road test, • Ability to pass a controlled substance test for pre-employmentpurposes, • Ability to enter on mine site property Knowledge, skills, abilities & physical requirements • CDL driver must be qualified to operate a combination vehicle as a driver in compliance with FMCSA, • Ability to operate a manual 10-speed configuration, • Must be insurable under the companys vehicle insurance policy, • Understand and comply with organizational policies and procedures and all applicable local, state, and federal rules and regulations, • Must be available for work when hours are available, according to FMCSAs hours of service regulations, • Ability to work varying hours and schedules; occasionally staying overnight with short notice, • Proficient in performing tasks in rapid succession, handling stressful situations, making quick decisions, and reacting, • Ability to crawl on hands and knees to open and close bottom hatches on the underside of the trailer, • Occasionally lift, carry, pull, push, and/or move up to 70 pounds, • Requires constant climbing of stairs and/or ladders, working at elevations of 14 feet above the ground, • The ability to sit, drive,shift gearsand stay awake for long periods of time, • Conduct tasks while wearing proper personal protective equipment (PPE), • Wear a face respirator and additional PPE when required while performing tasks, • Other configurations of PPE are required at all times while on mine and/or customer's property PERSONAL PROTECTIVE EQUIPMENT (PPE) requirements: PPE is required and must be worn in accordance with company policy and the Standard Operating Procedures (SOP) for each work site. PPE is typically issued by our safety department and may include but is not limited to: Hard hat with face shield Goggles/Spoggles Gloves Long sleeve shirt Reflective vest Hearing protection Respirator Mask (varies according to the work site) Steel toe boots (not supplied by CTI) Acid operations are outside in the elements and require a chemical-resistant acid suit, rubber gloves, rubber boots, a full-face respirator, and any other required PPE to be worn at all times while in a Hot Zone. Respirators: CTI employees are required to wear a full and/or half-mask respirator for any job task that requires a respirator. Respirators (PPE) are distributed by CTI and are used to protect employees from those occupational hazards caused by breathing contaminated air (harmful dust, fogs, fumes, mists, gases, smokes, sprays, or vapors). All CTI employees who are required to wear a respirator must be clean-shaven daily and in compliance with respirator protocols at all times. CDL Driver Job description is available upon request. This is a safety-sensitive position. CTI, Inc. is an Equal Opportunity Employer. CTI promotes a drug/alcohol-free work environment through the use of mandatory pre-employment and ongoing random testing. Applicants for this position will be required to undergo a drug test, which includes screening for marijuana and other prohibited substances. Please note that while marijuana may be legal under state law, it is not permitted for safety-sensitive positions at CTI, Inc. A positive test result will disqualify you from consideration for this role. Company policy could disqualify an applicant who has certain criminal history from employment in particular positions. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of this position. To request an accommodation, please contact our Human Resources office.

Job DescriptionSalary: Projected earnings for hourly drivers up to $60k Now hiring Class A CDL Drivers for our Marana, AZ Terminal! Hourly Pay + Bonuses = APPLY NOW..$$ Projected earnings up to $60k $500 Quarterly Safety Bonus Dedicated Tractors Local & Regional Loads = More home time! Double/Triple endorsement required This position requires drivers to load, transport, and deliver various bulk products that may include cement, lime, and fly ash, in pneumatic trailers to various mines and aggregate sites throughout Arizona and New Mexico. Drivers are typically home daily and run local and regional routes. We operate 24/7/365. Work schedules vary, depending on business needs. Load assignments are given based on hours of service available. Dedicated tractors are assigned, trailers are shared, and slip-seating is expected. Great Benefits: • Local and Regional routes, • Weekly pay, • Quarterly Safety BONUS, • Vacation,Sick& Holiday pay, • Medical, Dental, Vision, Life & Disability benefits, • Wellness Program, • 401(k) match CDL Truck Driver Job Requirements: • Valid Class A CDL, • Double/Triple endorsement required; Tank & Hazmat preferred., • Minimum 23 Years of age, • 1-year experience operating a combination vehicle. Less experience will be considered on an individual basis and may require an extended training period., • Valid DOT Physical, • No more than 2 moving violations within the previous 3 years, • No major violations within the previous 5 years, • Successful respirator physical, and respirator fit test, • Ability to pass a satisfactory road test, • Ability to pass a controlled substance test for pre-employmentpurposes Knowledge, skills, abilities & physical requirements • CDL driver must be qualified to operate a combination vehicle as a driver in compliance with FMCSA, • Ability to operate a manual 10-speed configuration, • Must be insurable under the companys vehicle insurance policy, • Understand and comply with organizational policies and procedures and all applicable local, state, and federal rules and regulations, • Drivers are responsible for completing thorough pre-and post-trip inspections, • Must be available for work when hours are available, according to FMCSAs hours of service regulations, • Ability to work varying hours and schedules; occasionally staying overnight with short notice, • Proficient in performing tasks in rapid succession, handling stressful situations, making quick decisions, and reacting, • Ability to crawl on hands and knees to open and close bottom hatches on the underside of the trailer, • Occasionally lift, carry, pull, push and/or move up to 70 pounds, • Requires constant climbing of stairs and/or ladders, working at elevations of 14 feet above the ground, • The ability to sit, drive,shift gearsand stay awake for long periods of time, • Conduct tasks while wearing proper personal protective equipment (PPE), • Wear a face respirator and additional PPE when required while performing tasks, • Other configurations of PPE are required at all times while on mine and/or customer property PERSONAL PROTECTIVE EQUIPMENT (PPE) requirements: PPE is required and must be worn in accordance with company policy and the Standard Operating Procedures (SOP) for each work site. PPE is typically issued by our safety department and may include but is not limited to: Hard hat with face shield Goggles/Spoggles Gloves Long sleeve shirt Reflective vest Hearing protection Respirator Mask (varies according to the work site) Steel toe boots (not supplied by CTI) Respirators: CTI employees are required to wear a full and/or half-mask respirator for any job task that requires a respirator. Respirators (PPE) are distributed by CTI and are used to protect employees from those occupational hazards caused by breathing contaminated air (harmful dust, fogs, fumes, mists, gases, smokes, sprays, or vapors). All CTI employees who are required to wear a respirator must be clean-shaven daily and in compliance with respirator protocols at all times. CDL Driver Job description is available upon request. This is a safety-sensitive position. CTI, Inc. is an Equal Opportunity Employer. CTI promotes a drug/alcohol-free work environment through the use of mandatory pre-employment and ongoing random testing. Applicants for this position will be required to undergo a drug test, which includes screening for marijuana and other prohibited substances. Please note that while marijuana may be legal under state law, it is not permitted for safety-sensitive positions at CTI, Inc. A positive test result will disqualify you from consideration for this role. Company policy could disqualify an applicant who has certain criminal history from employment in particular positions. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of this position. To request an accommodation, please contact our Human Resources office.

Job Description BAYADA Home Health Care is currently seeking an experienced Physical Therapist, PT, for a full time opportunity performing home health visits for our senior living office, located in East Tucson. This office services adult and geriatric clients on a per visit basis in territories throughout the Pima County Community. One year prior clinical experience as a licensed Physical Therapist is required. As a home care Physical Therapist, you will be an integral member of a multi-disciplinary health care team that provides rehabilitative care and skilled nursing to clients, affording them the opportunity to receive the medical care required to remain at home. At BAYADA, we believe our employees are our greatest asset. We are committed to investing in people and nurturing their desire to grow. Watch this video to learn more about field employee career pathing: Responsibilities for a PT - Physical Therapist include: • Make home visits to clients in designated geographic territories., • Perform diagnostic tests and measurements, such as the mobility/range of joints, transfer status, stability, patterns and appearance of ambulation, strength and endurance of muscles, balance testing, and safety assessments., • Implement integumentary protective interventions to prevent wound formation and promote wound repair utilizing evidence-based dressings and topical agents., • Develop and implement appropriate individualized care plans, including manual therapeutic exercises, gait training, balance, and other interventions., • Continually assess and revise the Physical Therapy - PT care plan, and participate with nursing in the multidisciplinary care plan, as appropriate., • Educate and instruct clients, family members, or other client representatives, in rehabilitative care and activities necessary to promote the client's health, safety, and independent living., • Accurately document observations, interventions, and evaluations pertaining to client care management and services provided, utilizing a state-of-the-art touch pad tablet. Qualifications for a PT - Physical Therapist include: • A current Arizona Physical Therapist - PT license., • A minimum of one year of recent work experience as a Physical Therapist - PT., • Graduation from a program approved by the American Physical Therapy Association or the Committee on Allied Health Education and Accreditation of the American Medical Association, as indicated by school transcript or diploma., • Ability to work independently and manage time effectively., • Strong interpersonal, organizational, and problem solving skills., • Solid computer skills; prior experience with electronic medical records (EMR) preferred. BAYADA believes that our employees are our greatest asset: • BAYADA offers a comprehensive benefits plan that includes the following: Paid holidays, vacation and sick leave, vision, dental and medical health plans, employer paid life insurance, 401k with company match, direct deposit and employee assistance program, • To learn more about BAYADA Benefits, click here, • Enjoy being part of a team that cares and a company that believes in leading with our values., • Feel confident, safe, and supported with PPE supplies, comprehensive infection prevention protocol, daily pre-screens, and close monitoring of the COVID-19 outbreak., • Develop your skills with training and scholarship opportunities., • Advance your career with specially designed career tracks., • Be recognized and rewarded for your compassion, excellence, and reliability. BAYADA is celebrating 50 years of compassion, excellence, and reliability. Learn more about our 50th anniversary celebration and how you can join in here. BAYADA Home Health Care, Inc., and its associated entities and joint venture partners, are Equal Opportunity Employers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, age, disability, pregnancy or maternity, sexual orientation, gender identity, citizenship status, military status, or any other similarly protected status in accordance with federal, state and local laws. Hence, we strongly encourage applications from people with these identities or who are members of other marginalized communities.

Join the Sargent Legacy in Securing Our Future With continual growth comes opportunity and Sargent has an immediate opening for a Supplier Quality Engineer. Responsibilities • Ensure safety is the foundation of daily work through vigilance and accountability, • Maintains approved supplier list and supporting evaluations, • Maintains supplier risk evaluations, • Reviews and approves suppliers through both mail-in audits and on-site audits, • Performs data analysis to identify systemic issues and develops quality improvement plans with the supplier using procative quality tools (PFMEA, MSA, Control plans, etc.), • Reports on supplier quality performance at Quality Management Board, • Performs preliminary review of supplier request for deviated material, • Leads purchasing corrective action meeting; accepts or rejects supplier corrective action requests, • Verify supplier containment is taken immediately upon discovery of a quality concern, • Liaison between Sargent functional teams and supplier for rejection disputes, • Assists supplier development team as needed to drive improvement and work transfers, • Support Advanced Quality Planning and PPAP review for new product introduction, • Maintains Supplier Quality Clauses and Supplier Quality Assurance Manual, • Bachelor's degree science degree in technical field, • Minimum 5 years of quality system auditing experience with 3 years of demonstrated experience performing external quality systems audits., • Must be ASQ CQA or must be able to achieve certification within 1 year of employment, • Ability to interpret Drawings, Specifications, Contracts to enable review of processes, • Must have demonstrated ability to use causal analysis tools to analyze and resolve issues varying from basic to complex, • Proficient skill level with Microsoft Office applications: Word, Excel, PowerPoint, etc, • Ability to communicate and work well with other individuals, departments and companies, • Must have the ability to travel, • Knowledge of electrical / mechanical engineering disciplines, • Experience with source inspection at suppliers, • Experience with performing First Article Inspections reviews to AS9102 requirements., • GD&T Experience, • Six-Sigma Green Belt, • Attended and Passed ISO9001 or AS9100 Lead Auditor training, • Ability to sit at a desk and work with a computer is necessary, sometimes for extended periods, • Ability to safely move about in a variety of work environments, from office to manufacturing floor, and other, • Ability to remain on a manufacturing shop floor, sometimes for extended periods, while meeting specified safety requirements (i.e., vision protection, foot/toe protection, and others as appropriateJoin the Sargent Legacy in Securing Our Future RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. RBC currently has 56 facilities, of which 37 are manufacturing facilities in ten countries and the market capitalization is approximately $6.2 billion. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines and land based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent's continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company's commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • \nIntegrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities: is fair, credible, confidential, fiscally responsible and accountable for decisions and actions., • \nRespects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes and supports the accomplishments, talents and development of others. Key Skills & Abilities: is committed to the building of strong relationships and creates an environment of trust and mutual respect., • \nCustomer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships, and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities: is responsive with strong customer service skills, product and job knowledge to provide excellent customer satisfaction., • \nTeamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities: is a dependable team player, demonstrated through attendance and punctuality, works well with others and has strong communication skills (both oral & written) to keep all stakeholders informed., • \nResults Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing and challenging environment. Key Skills & Abilities: is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • \nContinual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate and never satisfied with the status quo. Key Skills & Abilities: is innovative and has a problem solving mindset that provides and implements CI ideas. EEO/AA/F/M/Vet/Disabled

Job Description ___ Quality Assurance Engineer III Posting Start Date: 2/25/26 Job Location (Short): Tucson, Arizona, USA, 85706 | Tucson, Arizona, USA, 85706 Requisition ID: 34060 Onsite or Remote: Onsite Position Shape the Future of Mining with Komatsu Mining Technology Solutions: At Komatsu Mining Technology Solutions, we're not just talking about progress and innovation - we're making it happen. Our cutting-edge Modular brand solutions are powering mines worldwide, driving efficiency and sustainability in ways thatseemed impossible just years ago. The Autonomous Haulage System (AHS) is a comprehensive fleet management system for mines. Autonomous trucks are centrally controlled through a wireless network that integrates on-board vehicle controllers, high precision global positioning, and obstacle avoidance systems. The AHS Product Development team is responsible for building innovative solutions to unique and challenging autonomous operation problems. Working with our partners around the world, you will help design and support the next generation of mine optimization technologies and build the future platforms that will drive the changes in the mining industry for generations. As a Senior Software Quality Assurance Engineer - Autonomous Haulage System (AHS), you will engage with experienced cross-disciplinary team members to conceive and design innovative automation products. You will work closely with product management, hardware engineering, and operations teams. You must be responsive, flexible, and able to succeed in an open and collaborative peer environment. • Maintain deep understanding of AHS architecture, dependencies, and safety constraints; translate this knowledge into risk-based test plans and automated coverage., • Partner with product and engineering teams to extract, refine, and document functional+nonfunctional requirements; ensure each requirement has measurable acceptance criteria and automated validation., • Own the end-to-end quality strategy-including functional, performance, security, and fail over testing-leveraging service virtualization, contract testing, and containerized environments to maximize parallel execution in CI/CD., • Design, implement, and continuously enhance robust automation frameworks. Integrate tests seamlessly into CI/CD pipelines with infrastructure as code provisioning., • Drive a shift left culture: embed test hooks at design time, manage test data versioning, and maintain high signal regression suites that execute on every merge., • Lead execution of manual edge case and exploratory tests; automate everything else. Publish clear dashboards for pass/fail trends, defect escape rate, and MTTR; use metrics to guide continuous improvement., • Facilitate blameless postmortems, identify systemic issues, and convert findings into preventative automated checks., • Oversee compatibility matrices and deployment configurations, support field teams during installation, configuration, and on-site validation., • Mentor engineers, champion coding standards for test development, and pilot new tools or methodologies that increase team productivity and product quality. Coordinate cross functional initiatives to mature quality practices enterprise wide., • Be able to occasionally travel internationally., • Bachelor's degree in computer science, Software/Systems Engineering, or related discipline (Master's a plus)., • 6 +years combined experience in software/systems testing, with 4+years focused on building and scaling test automation., • Ability to take a project from scoping requirements to production operations, • Leadership defining comprehensive test strategies for complex, distributed or realtime systems., • Proficient in at least one modern programming language used for automation (Java, Python, or C#); strong REST/gRPC API and UI automation experience., • Handson expertise with CI/CD, containerization, and infrastructureascode for ondemand test environments., • Ability to mentor, influence, and uplevel QA and development teams., • Excellent analytical, documentation, and crossfunctional communication skills., • Ability to travel for up to 10% of the time, • 5+ years of full software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations experience, • Experience in event-driven microservices and REST API's, • Experience with network protocols, network programming, and distributed application debugging and analysis, • Excellence in technical communication with peers and non-technical cohorts Diversity & Inclusion Commitment At Komatsu we come from diverse backgrounds, with unique perspectives, experiences, and contributions.We are committed to creating a workforce that is reflective of the communities we work and live in. We believe that our people are part of our shared purpose.We are authentic, ambitious, and innovative in our pursuit of Diversity & Inclusion.United, we are on a journey towards a sustainable future that creates value together. If you want to learn more about Komatsu, please visit our website at ___. Company Information Komatsu is a world leader in manufacturing construction, mining, forestry, and industrial heavy equipment.Founded in 1921, Komatsu has a long history of quality, reliability, innovation, and excellence.Headquartered in Tokyo, Japan, Komatsu facilities, distributors and dealers are in more than 140 countries and employ more than 60,000 people.Komatsu offers a diverse and challenging work environment, where you can grow your skills and career, and contribute to a sustainable, clean-energy future.If you are looking for a company that values your talent and potential, be a part of something big and join a team that is shaping the world! EEO Statement Komatsu is an Equal Opportunity Workplace and an Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Description At The Country Club of La Cholla, we are dedicated to enriching the lives of our residents through compassionate care and unwavering support. We are seeking individuals who share our commitment to creating exceptional living experiences and who are eager to contribute to a supportive, family-like atmosphere. When you join The Country Club of La Cholla, you become an integral part of a team that values making a positive difference every single day. If you are driven by empathy and excellence, we invite you to bring your talents to our welcoming community. Full-time benefits include: • PTO (Paid Time Off) and Holiday Pay: Take advantage of paid time off to maintain a healthy work-life balance., • Daily pay: Get paid daily, providing you with financial flexibility and control over your earnings., • Health/Dental Insurance, • 401K with employer match: Plan for your financial future with our 401k program., • Life Insurance: Company paid life insurance, • Short and long-term disability: Financial security while you recover from an injury that puts you out of work, • Referral Bonuses: Refer qualified candidates and earn rewards, • Tuition Reimbursement: Invest in your education with our support Community buildings and grounds are the physical representation of our commitment to the health and happiness of our residents. It is the responsibility of the Maintenance Technician to ensure the safety and upkeep of the building, equipment, and the grounds. Additional responsibilities of the Maintenance Technician include the general maintenance operations for exterior and interior of the facility which includes electrical, refrigeration, plumbing, heating and cooling, structural, grounds care, and parking area. The Maintenance Technician renders quality maintenance services which meet resident needs and services and enhance safety. The Maintenance Technician reports to the Maintenance Director. Essential Functions of the Maintenance Technician • Ensures maintenance/repair service level is maintained to include electrical, plumbing, refrigeration, heating and cooling, structural facilities and grounds, and parking areas., • Ensures timely response to requests for services by residents, associates, and management to include repair or replacement of all interior fixtures and furnishings., • Monitors the level and quality of services performed by outside contractors in accordance to all lease agreements, service contracts, and warranties., • Maintains accurate records to include serial numbers of all equipment., • Ensures implementations of ongoing preventive maintenance and energy conservation programs., • Maintains emergency procedures and equipment and assists with the implementation of all emergency procedures for the safety of all guests and associates., • Maintains a clean and orderly work environment free of hazards., • Maintains adequate inventory of tools and supplies for maximum associate productivity., • Cleans light fixtures and replaces designated light bulbs., • Cleans the outside of resident apartment doors., • Operates, maintains, and cleans housekeeping equipment such as vacuum cleaner, buffer, shampoo machine, and mop unit., • Performs heavy cleaning and moving of furniture and fixtures in apartments and throughout the community., • Manages/performs apartment turn-over duties in assigned resident apartments., • Complies with community policies and procedures., • Team player who is collaborative and provides assistance to other associates to contribute to the smooth operation of the department and community., • Demonstrates safe and proper techniques for chemical/cleaning solutions., • Demonstrates knowledge of emergency and safety procedures., • Demonstrates knowledge of proper infection control technique including cleaning, storage, and food handling., • Supports and participates in the resident centered activity programs., • Participates in projects or committees as assigned., • Attends all associate meetings including in-service education and associate functions as requested by supervisor., • High School Diploma or GED required., • Minimum two to three years of experience in maintenance, carpentry, plumbing, electrical or HVAC, and repair of minor equipment., • The ability to speak, read, and write in English., • Must be able to push loaded cart and use vacuum cleaner, buffer, and carpet cleaning machines., • Ability to lift at least 40 pounds., • Must be able to relate to residents and staff in a courteous and diplomatic manner under all circumstances., • Must be able to work flexible hours., • Must be in good physical health and free of communicable disease., • Successful criminal background check and drug testing required., • Mechanical aptitude., • Knowledge of proper cleaning materials and their use., • Experience in maintenance and repair of minor equipment., • Must be friendly and have excellent people skills., • Physical requirements include bending, standing, lifting, stooping, sitting, carrying, stretching, and walking., • Must have manual dexterity to operate equipment., • Ability to get along with others.

Job DescriptionCompany Description Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description Type of Contract: Contract To Hire Per diem: Weekly Per diem for candidates who live +150 miles away from location Shifts: 1st, 2nd or Weekend • Adhere to General Work Requirements, • Perform inspection, make adjustment and repair, replace components, and correct any malfunction or deficiency with and without power applied to the aircraft, • Perform maintenance on customer aircraft in accordance with applicable technical data and FAA/JAA regulations, • Access and re-install aircraft components, which obstruct the performance of assigned tasks, • Perform basic mechanical and electrical removals and installations, • Document work performed per Inspections Procedures Manual (IPM), • Work on aircraft as well as in shops, • Perform other tasks, for example, cleaning aircraft using approved materials, methods, and equipment, load and secure ballast and/or freight as required, • Coordinate with technical representatives, lab, and other personnel in resolving systems or component problems, • Fabricate parts/wire harness and install per engineering specifications, • Assist with repairs on components detached from the aircraft, for example, flaps, ailerons, elevators, rudders, doors, and leading edges, • Assist with complex repairs at on-site and off-site locations, • Assist with engine removal and installation, • Assist in development of installations for engineering, • Assist with fueling/defueling aircraft as requiredQualifications, • Typically 3 years of avionics work experience or substantiated equivalent experience., • Ability to read and understand electrical engineering drawings., • Strong written and verbal communication skills for reporting on individual or aircraft status., • Own a basic set of hand tools and can demonstrate proper tool inventory and control., • Must obtain appropriate Ground Support Equipment (GSE) qualifications as required., • Must be able to work unscheduled overtime, including non-scheduled workdays and holidays., • Must be able to work outdoors in seasonal or inclement weather., • Ability to obtain a Security Identification Display Area (SIDA) badge, if applicable., • A Certification required if mandated by the customer (Commercial Aircraft); A Certification, P Certification, or A&P Certificate also acceptable., • Hold a GROL (General Radiotelephone Operator License) or AET (Aircraft Electronics Technician) Certificate., • Experience working on corporate jet aircraft or commercial aircraft., • Basic PC skills. Additional Information Here’s a heads-up of the upcoming steps: • Phone Interview with Recruiter: We’ll begin with an introductory call to discuss your background and interest in the role. Please make sure to add your correct phone number. You will hear from us soon., • Interview with the Hiring Manager, • Offer Letter: We´ll extend you an offer and start the onboarding process., • Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions, • Medical ,Dental and Vision coverage, • Employee life insurance, • Short & Long-Term Disability, • Voluntary Term Life, AD&D, & Critical Illness, • 401(K) with a Segula match #jsfirm

Job DescriptionCompany Description Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description Type of Contract: Contract To Hire Per diem: Weekly Per diem for candidates who live +150 miles away from location Shifts: 1st, 2nd or Weekend • Adhere to General Work Requirements, • Perform inspection, make adjustment and repair, replace components, and correct any malfunction or deficiency with and without power applied to the aircraft, • Perform maintenance on customer aircraft in accordance with applicable technical data and FAA/JAA regulations, • Access and re-install aircraft components, which obstruct the performance of assigned tasks, • Perform basic mechanical and electrical removals and installations, • Document work performed per Inspections Procedures Manual (IPM), • Work on aircraft as well as in shops, • Perform other tasks, for example, cleaning aircraft using approved materials, methods, and equipment, load and secure ballast and/or freight as required, • Coordinate with technical representatives, lab, and other personnel in resolving systems or component problems, • Fabricate parts/wire harness and install per engineering specifications, • Assist with repairs on components detached from the aircraft, for example, flaps, ailerons, elevators, rudders, doors, and leading edges, • Assist with complex repairs at on-site and off-site locations, • Assist with engine removal and installation, • Assist in development of installations for engineering, • Assist with fueling/defueling aircraft as requiredQualifications, • Typically 3 years of avionics work experience or substantiated equivalent experience., • Ability to read and understand electrical engineering drawings., • Strong written and verbal communication skills for reporting on individual or aircraft status., • Own a basic set of hand tools and can demonstrate proper tool inventory and control., • Must obtain appropriate Ground Support Equipment (GSE) qualifications as required., • Must be able to work unscheduled overtime, including non-scheduled workdays and holidays., • Must be able to work outdoors in seasonal or inclement weather., • Ability to obtain a Security Identification Display Area (SIDA) badge, if applicable., • A Certification required if mandated by the customer (Commercial Aircraft); A Certification, P Certification, or A&P Certificate also acceptable., • Hold a GROL (General Radiotelephone Operator License) or AET (Aircraft Electronics Technician) Certificate., • Experience working on corporate jet aircraft or commercial aircraft., • Basic PC skills. Additional Information Here’s a heads-up of the upcoming steps: • Phone Interview with Recruiter: We’ll begin with an introductory call to discuss your background and interest in the role. Please make sure to add your correct phone number. You will hear from us soon., • Interview with the Hiring Manager, • Offer Letter: We´ll extend you an offer and start the onboarding process., • Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions, • Medical ,Dental and Vision coverage, • Employee life insurance, • Short & Long-Term Disability, • Voluntary Term Life, AD&D, & Critical Illness, • 401(K) with a Segula match #jsfirm

Job Description The Test Technician position performs disassembly, assembly, re-work, and minimum testing of various electrical/electronic equipment. Job Title: R&O FAA Test Technician Schedule: 1st Shift Pay rate: $23.15/hr Location: Oro Valley, AZ 85755 Job Core Responsibilities • Maintain a clean and orderly workstation., • Maintain an acceptable safety record., • Maintain an acceptable attendance record, • Willing to learn to test and troubleshoot various products as required., • Completes necessary training to maintain knowledge and skills required for job performance, • Follow written and verbal instructions., • Position requires overtime to production schedules and demands., • Adhere to all company guidelines, policies and procedures., • Self-monitor work progress against fast-paced area benchmarks and achieve on time delivery of all work, • Assist with area efficiency and 6S improvement projects, • Assist other departments with job duties and tasks, as needed within the scope of expertise, • Complete work according to instructions, specifications and procedures, with limited supervision., • Properly record the work performed on the appropriate maintenance record., • Other responsibilities as assigned, • Approximately 80% sitting and 20% standing/walking about in-door Company facilities., • Lift and Carry up to 45 lbs., • Use hand tools, and power tools., • Use head and neck in static position, looking up/down and side-to-side., • Perform major hand grasping and fine finger manipulations using both hands., • Perform light lifting from floor, table and shelf., • Push and pull carts or mobile tables, loaded and unloaded., • Minimal: heavy lifting from floor or higher, bending, twisting, climbing, lifting arms above shoulders, kneeling., • Minimal: exposure to excessive noise, hazardous chemicals, hazardous equipment, uneven walking surfaces Job Specifications Education: High School Diploma or equivalent Certifications: N/A Years of Experience: 0-2 years prior work experience in an electronics Manufacturing/Testing environment Skills: • Ability to utilize manual and automated test equipment to test digital and analog circuitry., • Ability to read schematics and understand the circuit function., • Must be able to communicate fluently in technical terms both verbally and in writing., • Ability operate environmental test chambers, • Experience with MS Office Suite, • Must be computer literate. Completes work according to instructions, specifications and procedures. Conducts a variety of tests and verifications on electro and electromechanical equipment, while providing accuracy, productivity and on time delivery.

Job Description Full Time Position/ Salary range $25-27 per hour, depending on years of experience We are currently seeking an experienced fire alarm technician to join our team! What we offer: · Excellent working environment · Employee focused company · Medical, Dental and Vision Insurance · Paid Vacation and Holidays · Company vehicle Position overview: Responsible for installation, programming, testing, and inspecting of fire alarm systems in compliance with fire codes. Key Responsibilities: · Run and terminate fire alarm wiring · Installation of fire control panels, detectors, pull stations, notification and ancillary equipment. · Documentation of installation and equipment used. · Conduct acceptance testing on new installations · Train building owners on system operation Required Qualifications: · High school diploma or equivalent · 2-5 yrs experience with fire alarm systems · Good communication skills · Valid Driver’s License/Clean driving record · Clean Pre-employment Background Check · Clean Pre-employment Drug Test Technical Skills: · Ability to read shop drawings · Basic electronics: parallel and series circuits · Basic computer skills for programming · Mechanical aptitude with knowledge of power tools · Understanding of addressable and conventional fire alarm systems Physical Requirements: · Ability to lift 50 lbs. · Comfortable working on ladders up to 12+ feet · Ability to work in attics, crawl spaces and mechanical rooms · Capable of standing, kneeling and bending for extended periods · Manual dexterity for terminating wires and small components. Company DescriptionCentral Alarm, Inc. founded in 1939, is locally owned and operated and is one of Southern Arizona’s leading Fire/Burglar Alarm companies.Central Alarm, Inc. founded in 1939, is locally owned and operated and is one of Southern Arizona’s leading Fire/Burglar Alarm companies.

Job Description It's your career, give it wings! Who we are and where we are going: Ascent Aviation Services is one of the largest aviation maintenance, repair, overhaul, storage and reclamation operations in the world. Our strength comes from our talented and professional employees who excel through teamwork and enthusiasm. Ascent Aviation Services continues to grow and are continually looking for motivated and career minded aviation professionals who will support our vision and goals. Join our team as an A&P Mechanic where you'll inspect, repair, and overhaul aircraft systems and components with precision and expertise. From engine rebuilds to structural repairs, you'll work hands-on using technical data, FAA regulations, and advanced tools to ensure peak aircraft performance and safety. This dynamic role offers the opportunity to tackle diverse tasks daily, from electrical systems and hydraulics to documentation and shop maintenance, in a fast-paced, safety-driven environment alongside a skilled team of A&P Mechanics. As a 24/7 operation, we have openings across all shifts, including days, evenings, weekends, and 12-hour schedules. Candidates must be flexible and willing to work any shift based on operational needs. Preference is given to those available between 2:30 PM and 7:00 AM, including overnights and weekends. Some schedules may qualify for shift differential. Overtime—both scheduled and unscheduled, including holidays—may also be required. DUTIES/RESPONSIBILITIES: • Inspect, repair, service, and overhaul aircraft and related components., • Research technical data and perform disassembly, repair, cleaning, adjustment, assembly, testing, and calibration of aircraft components using company tools and equipment in accordance with maintenance manuals, FAA regulations, and company procedures., • Repair, replace, and rebuild aircraft structures including wings, fuselage, rigging, surface controls, plumbing, and hydraulic units., • Read and interpret manufacturers' and airlines' maintenance manuals, service bulletins, and other specifications to determine repair or replacement methods., • Complete documentation such as identification tags, inspection forms, routing tags, and component removal logs., • Disassemble and inspect aircraft and engine parts for wear or defects., • Repair or replace defective engine parts; reassemble and install engines., • Adjust, repair, or replace electrical wiring systems and aircraft accessories., • Perform miscellaneous service duties including cleaning, greasing, servicing, moving aircraft parts, and checking breaks., • Ensure training records are documented and signed by appropriate personnel., • Assist with maintenance of company equipment and general shop housekeeping., • 401K with Company Match, • Medical/Dental/Vision Insurance, • PTO - Eligible for 3 Weeks in your First Year, in Addition to 7 Paid Company Holidays, • Company-Provided Short-Term Disability, Long-Term Disability, and Life Insurance, • Strong organizational and planning skills with the ability to meet deadlines., • Ability to read, write, and comprehend English., • Follow verbal and written directions., • Skilled in interpreting and applying technical data., • Ability to safely drive and operate manual vehicles and equipment., • Capable of working independently or with minimal supervision., • Valid A&P License required., • Valid Driver's License required., • 3-5 years of experience in aircraft maintenance as an A&P Mechanic preferred., • Ability to sit, stand, and walk for extended periods of time., • Frequent bending, stooping, squatting, crouching, kneeling, balancing, and reaching above shoulder level., • Occasional crawling, climbing, lifting, carrying, pushing, or pulling up to 50 lbs. unassisted., • Requires eye-hand coordination and manual dexterity., • Aircraft ground servicing equipment including tugs, tractors, hi-lifts, trucks, servicing carts, and test equipment., • Aircraft ground servicing equipment including tugs, tractors, hi-lifts, trucks, servicing carts, and test equipment., • May be required to work at both Marana, AZ and Tucson, AZ locations as business needs dictate., • Employees are responsible for performing their duties in accordance with company policies and government regulations. These rules are written in the interest of preserving the lives and the resources entrusted to each employee, and when the rules are violated, the risk of a mishap is usually increased., • Employees shall participate in safety education programs and train to recognize hazards on the job and how to report them promptly. As a condition of employment, each member of Ascent Aviation agrees to report errors, incidents, and accidents honestly., • An employee who observes an unsafe action or condition should bring it to the attention of supervisors and managers. Certain conditions may allow the employee to easily correct or condition a situation. Duties not listed within the position description may be required of the employee at the discretion of the department management. Job functions may vary due to irregular working conditions or multiple shift positions. Ascent Aviation Services is dedicated to fostering an inclusive work environment. We provide equal employment opportunities and are committed to making reasonable accommodations for qualified individuals with disabilities to enable them to perform the essential functions of their job. If you require any accommodations during the application or interview process, please let us know. EEO/AA/F/M/VET/DIS

Job Description Ascend Healthcare is committed to providing fully integrated, quality psychiatric and behavioral health services in a compassionate, convenient, and affordable manner. We work with external partners to provide services to patients across the country through integrated psychiatric medication management, substance use disorder treatment, counseling services, peer support and care coordination for seamless patient care. We believe in a "no wrong door" treatment model which finds ways to say "yes" to any patient referral rather than a multitude of exclusionary criteria found elsewhere. This approach reflects our values of improved patient and clinician experience, better outcomes, and lower costs. The Ascend Story Founded to transform mental health care access, Ascend Healthcare delivers integrated psychiatric and behavioral health solutions with a commitment to equity, compassion, and operational excellence. We partner directly with health centers to build fully integrated, sustainable behavioral health programs—bringing deep clinical expertise, operational support, and long-term stability. Our work environment fosters: • Collaboration and teamwork, • Patient-First Mindset, • Work from home opportunities You'll be joining a team delivering innovative, compassionate care to communities that need it most. At Ascend, your work drives real impact—and your career grows alongside it. We believe in a "no wrong door" treatment model that finds ways to say "yes" to any patient referral rather than a multitude of exclusionary criteria found elsewhere. Position Summary: We are looking for a Licensed Therapist or Counselor (LPC, LCSW, LMFT) to provide Evening Hours (Mon-Fri, 10am-8pm) counseling and therapy treatment to our patients. Services will be provided remotely, through telemedicine, to patients of our Community Health Center partners throughout Arizona. We are a "say yes" first clinical provider and look to treat patients where they are and guide them along their journey to recovery and stabilization. *Clinician must be active or willing to obtain an Arizona License in addition to holding an active license in state of primary residence *Clinician must be willing to work evening hours, either Mon-Fri 10am-8pm or Tues-Fri 10am-8pm (2 days per week minimum) Key Areas of Ownership: • Provides patient care modalities of evidence-based practices to best meet the clinical needs of the patients. Examples include; CBT, DBT, Solution-Focused Therapy, Psychoeducation (Symptom Recognition), Trauma Therapy, Addiction Therapy, Acceptance and Commitment Therapy, Bereavement/Grief Counseling, etc., • These specific treatment modalities will be implemented in both the individual and group therapy setting, with a focus of engaging patients in their treatment plan., • Review and signature of patient clinical Psychosocial assessment, diagnosis, treatment plan, and consents as needed for the patient in a timely manner. Maintenance of the clinic record, including documentation of activities performed as part of the service delivery process., • Documents all services and patient activities appropriately. Ensures documentation complies with best clinical practices, contracts, regulatory and other legal, • Conducts crisis intervention for the individual and family based on the individual's safety plan., • Participate in regular case planning with the involved Multidisciplinary Team as new information is gathered to ensure the most clinically appropriate patient disposition., • Participate in individual and group supervision as required. Participate in ongoing education, including in-services, training, and other activities to maintain and improve competency. Demonstrate competency through post-testing, skill observation, and performance as assessed by direct supervisor, • Provides case management services to promote recovery and community reintegration as needed., • Active, unrestricted mental health license in state of primary residence and state of medical services being provided (Arizona), • Comfortable working in a remote environment, • Willingness to work evening hours, • Prolonged Sitting: Ability to sit for extended periods during working hours., • Manual Dexterity: Good hand-eye coordination and manual dexterity for using a computer keyboard, mouse, and other office equipment., • Visual Requirements: Adequate vision for reading computer screens and documents., • Communication: Clear verbal and written communication skills for virtual meetings and correspondence., • Hearing: Sufficient hearing ability for participating in phone calls or virtual meetings., • Competitive Salary, • Medical, Dental, Vision, Life and LTD benefits, • PTO + Company and Floating Holidays, • Yearly CEU Stipend, • Collaborative Environment, • Remote-first setting Starting Minimum Salary: $80,000-$90,000 with primary residence in AZ Monthly Bonus Program Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • 5, 8-hour or 4, 10-hour shifts, • Health insurance, • Life insurance, • Paid time off, • Professional development assistance Ascend Healthcare participates in conducting comprehensive background checks and drug screenings for all potential employees as a contingency to gaining employment status.

Job Description Join the Sargent Legacy in Securing Our Future With continual growth comes opportunity and Sargent has an immediate opening for a Supplier Quality Engineer. Responsibilities • Ensure safety is the foundation of daily work through vigilance and accountability, • Maintains approved supplier list and supporting evaluations, • Maintains supplier risk evaluations, • Reviews and approves suppliers through both mail-in audits and on-site audits, • Performs data analysis to identify systemic issues and develops quality improvement plans with the supplier using procative quality tools (PFMEA, MSA, Control plans, etc.), • Reports on supplier quality performance at Quality Management Board, • Performs preliminary review of supplier request for deviated material, • Leads purchasing corrective action meeting; accepts or rejects supplier corrective action requests, • Verify supplier containment is taken immediately upon discovery of a quality concern, • Liaison between Sargent functional teams and supplier for rejection disputes, • Assists supplier development team as needed to drive improvement and work transfers, • Support Advanced Quality Planning and PPAP review for new product introduction, • Maintains Supplier Quality Clauses and Supplier Quality Assurance Manual, • Bachelor’s degree science degree in technical field, • Minimum 5 years of quality system auditing experience with 3 years of demonstrated experience performing external quality systems audits., • Must be ASQ CQA or must be able to achieve certification within 1 year of employment, • Ability to interpret Drawings, Specifications, Contracts to enable review of processes, • Must have demonstrated ability to use causal analysis tools to analyze and resolve issues varying from basic to complex, • Proficient skill level with Microsoft Office applications: Word, Excel, PowerPoint, etc, • Ability to communicate and work well with other individuals, departments and companies, • Must have the ability to travel, • Knowledge of electrical / mechanical engineering disciplines, • Experience with source inspection at suppliers, • Experience with performing First Article Inspections reviews to AS9102 requirements., • GD&T Experience, • Six-Sigma Green Belt, • Attended and Passed ISO9001 or AS9100 Lead Auditor training, • Ability to sit at a desk and work with a computer is necessary, sometimes for extended periods, • Ability to safely move about in a variety of work environments, from office to manufacturing floor, and other, • Ability to remain on a manufacturing shop floor, sometimes for extended periods, while meeting specified safety requirements (i.e., vision protection, foot/toe protection, and others as appropriateJoin the Sargent Legacy in Securing Our Future RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. RBC currently has 56 facilities, of which 37 are manufacturing facilities in ten countries and the market capitalization is approximately $6.2 billion. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines and land based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Integrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities: is fair, credible, confidential, fiscally responsible and accountable for decisions and actions., • Respects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes and supports the accomplishments, talents and development of others. Key Skills & Abilities: is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships, and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities: is responsive with strong customer service skills, product and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities: is a dependable team player, demonstrated through attendance and punctuality, works well with others and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing and challenging environment. Key Skills & Abilities: is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate and never satisfied with the status quo. Key Skills & Abilities: is innovative and has a problem solving mindset that provides and implements CI ideas. EEO/AA/F/M/Vet/Disabled

Job DescriptionJoin the Sargent Legacy in Securing our Future Job Title: Automation Intern Location: Tucson, AZ Department: Marine Mechatronics Reports To: Tucson IT & Automation Manager Job Type: Full-Time Who We Are Looking For: Sargent Aerospace & Defense is seeking a detail-oriented, proactive, individual to join our growing Mechatronics Team. This role is key to supporting and enhancing our manufacturing systems and processes, directly impacting operational efficiency across the organization. As part of a larger team that values innovation and collaboration, you’ll work on meaningful projects that drive real business results. We’re looking for someone who embraces our core values, is eager to learn, and thrives in a collaborative cross-functional environment. Position Summary The Automation Intern supports the design, development, testing, and documentation of automation solutions that improve operational efficiency and data accuracy across the organization. This role provides hands-on experience working with automation tools, scripts, and workflows while collaborating with IT, business, and process owners. You will assist with analyzing manual processes, identifying automation opportunities, and implementing solutions under the guidance of experienced automation professionals. This position is ideal for a student or early-career professional seeking practical experience in automation, process improvement, and modern enterprise technologies. Responsibilities • Assist in designing, developing, and testing automation solutions to streamline manual or repetitive processes, • Perform testing, troubleshooting, and validation of automated processes to ensure accuracy and reliability, • Create technical and user documentation, including process diagrams and wiring diagrams, • Assist in programming and configuring PLCs, HMIs, data acquisition systems, or test control software, • Participate in test stand setup, teardown, and safety checks to ensure compliance with safety standards, • Research best practices and IIoT capabilities, • Adhere to security, compliance, and change‑management standards, • Gain hands-on experience with enterprise automation, data handling, and modern technology platforms Minimum Qualifications • Must be a U.S. Citizen, • Pursuing a degree in Electrical Engineering, Mechanical Engineering, Computer Science or related field, • Microsoft Office proficiency, • Good personal organizational skills to control productivity, • Effective written and verbal communication skills for documentation and collaboration, • Strong analytical and troubleshooting skills with attention to detail, • Ability to work both independently and as part of a cross-functional technical team Preferred Qualifications • Coursework or hands-on experience with hydraulic systems, fluid power, or industrial equipment, • Basic understanding of hydraulic components such as pumps, valves, accumulators, actuators, and manifolds, • LabVIEW experience, • CAD software experience (e.g. Creo, SolidWorks, AutoCAD), • Exposure to data acquisition systems, sensors, and instrumentation (pressure, flow, temperature, position), • Experience/working knowledge of manufacturing processes, • Familiarity with automation or control systems, including PLCs, HMIs, or industrial control software, • Enjoys hands-on breadboarding electronics, • Experience with data visualization tools Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines and land based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Flexible Schedules, • 3 & 4-day work week, • Integrity We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities: is fair, credible, confidential, fiscally responsible and accountable for decisions and actions., • Respects and Values People. - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes and supports the accomplishments, talents and development of others. Key Skills & Abilities: is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships, and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities: is responsive with strong customer service skills, product and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities: is a dependable team player, demonstrated through attendance and punctuality, works well with others and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing and challenging environment. Key Skills & Abilities: is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail.

Job Description It’s your career, give it wings! Who we are and where we are going: Ascent Aviation Services is one of the largest aviation maintenance, repair, overhaul, storage and reclamation operations in the world. Our strength comes from our talented and professional employees who excel through teamwork and enthusiasm. Ascent Aviation Services continues to grow and are continually looking for motivated and career minded aviation professionals who will support our vision and goals. At Ascent Aviation Services, our Avionics Technicians uphold our core values of Respect, Safety, Quality, and Results while ensuring the highest standards of aircraft reliability. In this role, you will research technical data, perform inspections, testing, adjustments, and repairs on avionics systems—including radar, radio, navigation, autopilot, and compass systems—in accordance with FAA regulations, maintenance manuals, and company procedures. As a 24/7 operation, we have openings across all shifts—including standard day shifts, 2nd shift, weekend shifts, and 12-hour shifts. Candidates must be flexible and willing to be assigned to any shift based on operational needs. DUTIES/RESPONSIBILITIES: • Research technical data and performs inspection, testing, adjusting, and repairing of avionics equipment, such as radar, radio, navigation, auto pilot, and compass systems, installed in aircraft in accordance with applicable maintenance manuals, FAA regulations and Ascent Aviation Services policies and procedures., • Accomplished maintenance actions are concisely and accurately recorded on repair station and/or customer provided approved documents., • Inspects components of avionics equipment for defects, such as loose connections and frayed wire, and for accuracy of assembly and installation. Tests avionics equipment under simulated or actual operating conditions to determine performance and airworthiness, using test equipment, such as oscilloscopes, digital meters and counters, and circuit analyzers., • Adjusts, repairs, or replaces defective components based on analysis of test results, following blueprints, schematics, handbooks, and other technical documents., • Calibrates installed or repaired equipment to prescribed specifications., • Avionics testing equipment such as VOR/ILS tester, fuel quality tester, DME tester, pitot-static tester, volt-ohm meter, hi-lifts, stands, ladders., • Ensures that proper documentation is made on training record for training received, and signed by Lead, Supervisor, or Manager., • Performs maintenance duties away from base on temporary duty., • Performs maintenance work such as repair and maintenance of company equipment and shop housecleaning., • Ensure that all work performed is done in a safe manner. Directs activities to protect employees from harm and maintain safe working conditions., • Avionics testing equipment such as VOR/ILS tester, fuel quality tester, DME tester, pitot-static tester, volt-ohm meter, hi-lifts, stands, ladders. YOU WILL GET MORE THAN JUST COMPENSATION: • 401K with Company Match, • Medical/Dental/Vision Insurance, • PTO - Eligible for 3 Weeks in your First Year, in Addition to 7 Paid Company Holidays, • Company-Provided Short-Term Disability, Long-Term Disability, and Life Insurance, • 1-3 years of aircraft avionics technician experience., • A or A&P License and/or FCC license preferred., • Ability to organize and plan work adhering to deadlines., • Attention to detail. EDUCATION AND EXPERIENCE: • High School Diploma or equivalent required., • Post secondary education or training in aircraft maintenance, preferably Avionics, required., • Requires sitting, standing or walking for extended periods of time., • Requires frequent walking, climbing and lifting, bending, reaching shoulder level, carrying, pushing or pulling weight up to 50 pounds., • Requires eye-hand coordination and manual dexterity., • The work location will include aircraft Maintenance hangars, the flightline, and Avionics shop., • May be required to work at both Marana, AZ and Tucson, AZ locations as business needs dictate., • Employees are responsible for performing their duties in accordance with company policies and government regulations. These rules are written in the interest of preserving the lives and the resources entrusted to each employee, and when the rules are violated, the risk of a mishap is usually increased., • Employees shall participate in safety education programs and train to recognize hazards on the job and how to report them promptly. As a condition of employment, each member of Ascent Aviation agrees to report errors, incidents, and accidents honestly., • An employee who observes an unsafe action or condition should bring it to the attention of supervisors and managers. Certain conditions may allow the employee to easily correct or condition a situation. Duties not listed within the position description may be required of the employee at the discretion of the department management. Job functions may vary due to irregular working conditions or multiple shift positions. Ascent Aviation Services is dedicated to fostering an inclusive work environment. We provide equal employment opportunities and are committed to making reasonable accommodation for qualified individuals with disabilities to enable them to perform the essential functions of their job. If you require any accommodation during the application or interview process, please let us know. EEO/AA/F/M/VET/DIS

Job Description Provide hands-on manufacturing support, utilizing provided training to aide in machining and hardware assembly production. Support the full product life cycle from research and development to low volume production. Provide assembly, machine operation, and testing support as required. Must be a responsible self-starter. Description of Duties: • Will support program production with basic to medium complexity mechanical assembly., • Follow detailed written and verbal instructions to produce hardware., • Deburr machined components prior to inspection in accordance with the manufacturing drawings., • Assemble/install a variety of hardware in accordance with specifications and work instructions., • Complete documentation of hardware manufacturing and verification processes in accordance with AS9100/ISO9001., • Must be capable of assembling prototype hardware in a fast-paced aerospace environment., • Provide back-up lab technician support as needed., • Communicate issues to quality., • Frequently lifts, carries, or otherwise moves and positions objects weighing up to 50 pounds., • Will be required to perform repetitive motions for extended periods of time., • Typically bends, stoops and crouches on a regular basis., • Perform other duties as assigned. Knowledge, Skills, and Abilities: • Proficient with assembling hardware, applicable cross functional skills acceptable., • Ability to read engineering drawings including GD&T per ASME Y14.5, • Knowledgeable in a variety of metal working tools and equipment., • Knowledge of and experience with Foreign Object Debris (FOD) and working within a visibly clean environment. Can implement and work to "clean as you go" best practices., • Knowledge of and proficiency in the safe use of mechanical measuring instruments, • Familiar with working under ISO9001 & AS9100 requirements., • Skill in maintaining a clean, safe work environment., • Ability to operate various assembly equipment, such as pneumatic riveters, helical installation tools (both manual and electric), and various torque wrenches., • Capable of working to verbal and written communications., • Ability to support production requirements as required for the safe operation of standard manufacturing equipment and machinery., • Ability to stand, stoop, and crouch over 50% of the time., • Ability to lift objects weighing up to 50lbs., • Ability to read standard work instructions., • Ability to solve routine problems independently. Ability to demonstrate self-initiative in a fast-paced environment with minimal supervision., • Ability to establish and maintain effective, positive work relationships; have creativity, flexibility, and resourcefulness. Job Posted by ApplicantPro

Job Description It’s your career, give it wings! Who we are and where we are going: Ascent Aviation Services is one of the largest aviation maintenance, repair, overhaul, storage and reclamation operations in the world. Our strength comes from our talented and professional employees who excel through teamwork and enthusiasm. Ascent Aviation Services continues to grow and are continually looking for motivated and career-minded aviation professionals who will support our vision and goals. We are seeking an Interiors Technician. The Interiors Technician supports aircraft maintenance by restoring, repairing, and installing interior components to meet regulatory and customer expectations. As a 24/7 operation, we have openings across all shifts, including days, evenings, weekends, and 12-hour schedules. Candidates must be flexible and willing to work any shift based on operational needs. Overtime—both scheduled and unscheduled, including holidays—may also be required. DUTIES/RESPONSIBILITIES: • Research technical data and performs disassembly, repair, cleaning, adjustment, and testing of cabin interiors and related equipment in accordance with applicable maintenance manuals, FAA regulations and Ascent Aviation Services policies and procedures., • Installs aircraft interior furnishings, trim and accessories, including carpeting, sidewalls, doors, windows, seats, partitions, galleys, and passenger service units, according to specifications., • Reads and interprets blueprints, drawings, and production procedures to determine measurements and installation procedures., • Measures and marks installation areas in aircraft interior, using measuring and marking instruments and templates, drills, reams, countersinks, and rivets., • Trims and files parts and assemblies, using hand tools and power tools., • Fits and installs items in aircraft, using hand tools, power tools, and fasteners, such as screws, rivets bolts and speed nuts., • Performs maintenance work such as repair and maintenance of company equipment and shop housecleaning., • Fabricates and installs supporting structural devices such as clips, brackets, angles, gussets, and doublers, using shop equipment., • Ensures that proper documentation is made on training record for training received, and signed by Lead, Supervisor, or Manager., • Tests functional performance of installed items., • 401Kwith Company Match, • Medical/Dental/Vision Insurance, • PTO - Eligible for 3 Weeks in your First Year, in Addition to 7 Paid Company Holidays, • Company-Provided Short-Term Disability, Long-Term Disability, and Life Insurance, • Strong organizational and planning skills with the ability to adhere to deadlines., • Excellent attention to detail and mathematical proficiency., • Ability to safely drive and operate a standard shift automotive vehicle and other related equipment., • Capable of working independently or under supervision., • 1-3 years of Aircraft maintenance experience, • Repairman’s Certificate for Interiors and Related Structures preferred., • Valid Driver’s License required, • Ability to read, write, and comprehend English with the capability to follow verbal and written instructions., • Ability to sit, stand, and walk for extended periods of time., • Frequent bending, stooping, squatting, crouching, kneeling, balancing, and reaching above shoulder level., • Occasional crawling, climbing, lifting, carrying, pushing, or pulling up to 50 lbs. unassisted., • Requires eye-hand coordination and manual dexterity., • The work location will include aircraft maintenance hangars, flightline, and Avionics shop., • May be required to work at both Marana, AZ and Tucson, AZ locations as business needs dictate., • Employees are responsible for performing their duties in accordance with company policies and government regulations. These rules are written in the interest of preserving the lives and the resources entrusted to each employee, and when the rules are violated, the risk of a mishap is usually increased., • Employees shall participate in safety education programs and train to recognize hazards on the job and how to report them promptly. As a condition of employment, each member of Ascent Aviation agrees to report errors, incidents, and accidents honestly., • An employee who observes an unsafe action or condition should bring it to the attention of supervisors and managers. Certain conditions may allow the employee to easily correct or condition a situation. Ascent Aviation Services is dedicated to fostering an inclusive work environment. We provide equal employment opportunities and are committed to making reasonable accommodation for qualified individuals with disabilities to enable them to perform the essential functions of their job. If you require any accommodation during the application or interview process, please let us know. EEO/AA/F/M/VET/DIS

Job Description "All candidates must be directly contracted by ASK Consulting on their payroll and cannot be subcontracted. We are unable to provide sponsorship at this moment". Job Title: AI Solutions Architect Location: Tucson, AZ Duration: 12+ Months PR: $70 - $76 hr. On W2 Notes: This is an onsite position for an AI Solutions Architect with 4 years of experience. Job Description: • As the AI Solutions Architect, you will support the automation and digitization of product development workflows for the Client Development Organization., • In this role, you will create custom technical solutions to assist our scientists and engineers in accelerating innovation., • Your daily impact involves generating innovative automation design solutions, testing for performance, and identifying prime opportunities to design and deploy Generative AI and Robotic Process Automation solutions., • Workflow Transformation: Partner with Subject Matter Experts (SMEs) to audit and map complex diagnostic workflows, identifying bottlenecks and designing "future state" processes that transition analog tasks into digitized, automated systems., • AI Solution Architecture: Design and deploy end-to-end technical solutions utilizing LLMs, scripting (Python/Bash), and integration tools to automate manual data entry and information retrieval., • Quality & Risk Mitigation: Develop and manage rigorous evaluation frameworks for AI outputs, ensuring quality checks are in place to mitigate hallucinations and maintain strict adherence to data privacy and security compliance., • Prompt & API Engineering: Design, test, and refine complex prompt structures and manage the integration of AI APIs into existing business systems to enhance organizational productivity., • Performance Tracking: Establish baseline productivity metrics and track KPIs to measure the ROI and time saved through newly implemented automated processes., • LLM & Generative AI Expertise: Advanced proficiency in state-of-the-art models, including a deep understanding of token limits, specific model constraints, and appropriate use cases for varying architectures., • Systems Architecture & Digitization: Proven ability to architect solutions that bridge siloed data environments and create accessible, digitized information flows., • Communication: Proven skill in bridging the communication gap between specialized Subject Matter Experts (SMEs) and technical teams, ensuring that AI solutions address the specific pain points of a product development environment., • Technical Scripting & Automation: Proficiency in Python or Bash and hands-on experience with automation platforms., • Analytical Problem Solving: Strong capability to take ambiguous, manual problems and engineer streamlined, scalable, and autonomous solutions., • Cross-Functional Collaboration: Exceptional ability to partner with scientists and engineering teams, translating technical requirements into operational excellence., • Bachelors Degree or equivalent in a directly related discipline with 4 yrs experience OR, • MS with 2+ yrs or PhD About ASK: ASK Consulting is an award-winning technology and professional services recruiting firm servicing Fortune 500 organizations nationally. With 5 nationwide offices, two global delivery centers, and employees in 42 states-ASK Consulting connects people with amazing opportunities ASK Consulting is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all associates.

Job DescriptionJoin the Sargent Legacy in Securing our Future Location: Tucson, AZ (85743,85756) Who We Are Looking For: Sargent Aerospace & Defense is seeking a detail-oriented, proactive, individual to join our growing Mechatronics Team. This role is key to supporting and enhancing our manufacturing systems and processes, directly impacting operational efficiency across the organization. As part of a larger team that values innovation and collaboration, you’ll work on meaningful projects that drive real business results. We’re looking for someone who embraces our core values, is eager to learn, and thrives in a collaborative cross-functional environment. Position Summary The Automation Intern supports the design, development, testing, and documentation of automation solutions that improve operational efficiency and data accuracy across the organization. This role provides hands-on experience working with automation tools, scripts, and workflows while collaborating with IT, business, and process owners. You will assist with analyzing manual processes, identifying automation opportunities, and implementing solutions under the guidance of experienced automation professionals. This position is ideal for a student or early-career professional seeking practical experience in automation, process improvement, and modern enterprise technologies Responsibilities • Assist in designing, developing, and testing automation solutions to streamline manual or repetitive processes, • Perform testing, troubleshooting, and validation of automated processes to ensure accuracy and reliability, • Create technical and user documentation, including process diagrams and wiring diagrams, • Assist in programming and configuring PLCs, HMIs, data acquisition systems, or test control software, • Participate in test stand setup, teardown, and safety checks to ensure compliance with safety standards, • Research best practices and IIoT capabilities, • Adhere to security, compliance, and change‑management standards, • Gain hands-on experience with enterprise automation, data handling, and modern technology platforms Minimum Qualifications • Must be a U.S. Citizen, • Pursuing a degree in Electrical Engineering, Mechanical Engineering, Computer Science or related field, • Microsoft Office proficiency, • Good personal organizational skills to control productivity, • Effective written and verbal communication skills for documentation and collaboration, • Strong analytical and troubleshooting skills with attention to detail, • Coursework or hands-on experience with hydraulic systems, fluid power, or industrial equipment, • Basic understanding of hydraulic components such as pumps, valves, accumulators, actuators, and manifolds, • LabVIEW experience, • CAD software experience (e.g. Creo, SolidWorks, AutoCAD), • Exposure to data acquisition systems, sensors, and instrumentation (pressure, flow, temperature, position), • Experience/working knowledge of manufacturing processes, • Familiarity with automation or control systems, including PLCs, HMIs, or industrial control software, • Enjoys hands-on breadboarding electronics, • Experience with data visualization tools In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines and land based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Flexible Schedules, • 3 & 4-day work week, • Integrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities: is fair, credible, confidential, fiscally responsible and accountable for decisions and actions., • Respects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes and supports the accomplishments, talents and development of others. Key Skills & Abilities: is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships, and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities: is responsive with strong customer service skills, product and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities: is a dependable team player, demonstrated through attendance and punctuality, works well with others and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing and challenging environment. Key Skills & Abilities: is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate and never satisfied with the status quo. Key Skills & Abilities: is innovative and has a problem solving mindset that provides and implements CI ideas. EEO/AA/F/M/Vet/Disabled

Job Description Join the Sargent Legacy in Securing Our Future With continual growth comes opportunity and Sargent has an immediate opening for a Manufacturing Tech I. Purpose and Scope: The purpose of this Manufacturing Tech I position is to process components through the liner process. Roles and Responsibilities: • Ensure safety is the foundation of daily work through vigilance and accountability., • Responsible for setting up and operating machinery in support of the production process., • Performs operations per specifications on drawing/print and documented procedures., • Maintains a clean and safe work area at all times., • Ability to use basic hand tools (i.e., utility knife) and machines (i.e., sandblaster, speed lathe)., • Ability to read blueprints/engineering drawings., • Good understanding of quality control principles., • Good communication and teamwork skills., • Complete daily production logs as required., • Complete required equipment maintenance checks., • Responsible for complying with internal quality systems and procedures. Required Skills, Education & Experience: • High School education or GED required., • Must be able to read and write English., • Must follow detailed instructions, do accurate work at a rapid pace and meet scheduling deadlines., • Manual dexterity and the ability to carry out complex, repetitive tasks quickly and methodically., • Available to work overtime as required., • While performing the duties of this job, the employee may be required to bend, squat, sit, stand, walk, and handle objects. The employee is occasionally required to push/pull and reach above shoulder level. The employee must be able to carry/lift up to 40 pounds and be able to rotate item being handled., • Work on feet for entire shift., • Must be a U.S. Citizen Preferred Skills, Education & Experience: • Previous mechanical or other manufacturing experience preferred., • Autoclave and/or Sandblast experience is a plus., • Experience with measuring equipment., • Ability to read part drawings (flag notes, dimensions, tolerances)., • Demonstrated leadership and ability to work with minimal supervision. RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace and defense markets. RBC currently has 56 facilities, of which 37 are manufacturing facilities in ten countries and the market capitalization is approximately $6.2 billion. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines, and land-based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Flexible Schedules, • 3 & 4-day work week, • ½ day Fridays Dedication to our core values. Our must haves… • Integrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities is fair, credible, confidential, fiscally responsible, and accountable for decisions and actions., • Respects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes, and supports the accomplishments, talents, and development of others. Key Skills & Abilities is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities is responsive with strong customer service skills, product, and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas, and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities is a dependable team player, demonstrated through attendance and punctuality, works well with others, and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing, and challenging environment. Key Skills & Abilities is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate, and never satisfied with the status quo. Key Skills & Abilities is innovative and has a problem-solving mindset that provides and implements CI ideas. EEO/AA/F/M/VET/DISABLED

Job Description Join the Sargent Legacy in Securing Our Future This will be a weekend shift Fri-Sun 6:00 am - 6:00 pm With continual growth comes opportunity and Sargent has an immediate opening for a Manufacturing Tech I. Purpose and Scope: The purpose of this Manufacturing Tech I position is to process components through the liner process. Roles and Responsibilities: • Ensure safety is the foundation of daily work through vigilance and accountability., • Responsible for setting up and operating machinery in support of the production process., • Performs operations per specifications on drawing/print and documented procedures., • Maintains a clean and safe work area at all times., • Ability to use basic hand tools (i.e., utility knife) and machines (i.e., sandblaster, speed lathe)., • Ability to read blueprints/engineering drawings., • Good understanding of quality control principles., • Good communication and teamwork skills., • Complete daily production logs as required., • Complete required equipment maintenance checks., • Responsible for complying with internal quality systems and procedures. Required Skills, Education & Experience: • High School education or GED required., • Must be able to read and write English., • Must follow detailed instructions, do accurate work at a rapid pace and meet scheduling deadlines., • Manual dexterity and the ability to carry out complex, repetitive tasks quickly and methodically., • Available to work overtime as required., • While performing the duties of this job, the employee may be required to bend, squat, sit, stand, walk, and handle objects. The employee is occasionally required to push/pull and reach above shoulder level. The employee must be able to carry/lift up to 40 pounds and be able to rotate item being handled., • Work on feet for entire shift., • Must be a U.S. Citizen Preferred Skills, Education & Experience: • Previous mechanical or other manufacturing experience preferred., • Autoclave and/or Sandblast experience is a plus., • Experience with measuring equipment., • Ability to read part drawings (flag notes, dimensions, tolerances)., • Demonstrated leadership and ability to work with minimal supervision. RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace and defense markets. RBC currently has 56 facilities, of which 37 are manufacturing facilities in ten countries and the market capitalization is approximately $6.2 billion. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines, and land-based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Flexible Schedules, • 3 & 4-day work week, • ½ day Fridays Dedication to our core values. Our must haves… • Integrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities is fair, credible, confidential, fiscally responsible, and accountable for decisions and actions., • Respects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes, and supports the accomplishments, talents, and development of others. Key Skills & Abilities is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities is responsive with strong customer service skills, product, and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas, and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities is a dependable team player, demonstrated through attendance and punctuality, works well with others, and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing, and challenging environment. Key Skills & Abilities is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate, and never satisfied with the status quo. Key Skills & Abilities is innovative and has a problem-solving mindset that provides and implements CI ideas. EEO/AA/F/M/VET/DISABLED

Job Description Join the Sargent Legacy in Securing Our Future This will be a second shift position working Mon-Thu 3:30 pm - 2:00 am. With continual growth comes opportunity and Sargent has an immediate opening for a Manufacturing Tech I - 2nd Shift. Purpose and Scope: The purpose of this Manufacturing Tech I position is to process components through the liner process. Roles and Responsibilities: • Ensure safety is the foundation of daily work through vigilance and accountability., • Responsible for setting up and operating machinery in support of the production process., • Performs operations per specifications on drawing/print and documented procedures., • Maintains a clean and safe work area at all times., • Ability to use basic hand tools (i.e., utility knife) and machines (i.e., sandblaster, speed lathe)., • Ability to read blueprints/engineering drawings., • Good understanding of quality control principles., • Good communication and teamwork skills., • Complete daily production logs as required., • Complete required equipment maintenance checks., • Responsible for complying with internal quality systems and procedures. Required Skills, Education & Experience: • High School education or GED required., • Must be able to read and write English., • Must follow detailed instructions, do accurate work at a rapid pace and meet scheduling deadlines., • Manual dexterity and the ability to carry out complex, repetitive tasks quickly and methodically., • Available to work overtime as required., • While performing the duties of this job, the employee may be required to bend, squat, sit, stand, walk, and handle objects. The employee is occasionally required to push/pull and reach above shoulder level. The employee must be able to carry/lift up to 40 pounds and be able to rotate item being handled., • Work on feet for entire shift., • Must be a U.S. Citizen Preferred Skills, Education & Experience: • Previous mechanical or other manufacturing experience preferred., • Autoclave and/or Sandblast experience is a plus., • Experience with measuring equipment., • Ability to read part drawings (flag notes, dimensions, tolerances)., • Demonstrated leadership and ability to work with minimal supervision. RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace and defense markets. RBC currently has 56 facilities, of which 37 are manufacturing facilities in ten countries and the market capitalization is approximately $6.2 billion. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines, and land-based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Flexible Schedules, • 3 & 4-day work week, • ½ day Fridays Dedication to our core values. Our must haves… • Integrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities is fair, credible, confidential, fiscally responsible, and accountable for decisions and actions., • Respects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes, and supports the accomplishments, talents, and development of others. Key Skills & Abilities is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities is responsive with strong customer service skills, product, and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas, and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities is a dependable team player, demonstrated through attendance and punctuality, works well with others, and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing, and challenging environment. Key Skills & Abilities is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate, and never satisfied with the status quo. Key Skills & Abilities is innovative and has a problem-solving mindset that provides and implements CI ideas. EEO/AA/F/M/VET/DISABLED

Job Description Join the Sargent Legacy in Securing Our Future With continual growth comes opportunity and Sargent has an immediate opening for a Manufacturing Tech I. Purpose and Scope: The purpose of this Manufacturing Tech I position is to process components through the liner process. Roles and Responsibilities: • Ensure safety is the foundation of daily work through vigilance and accountability., • Responsible for setting up and operating machinery in support of the production process., • Performs operations per specifications on drawing/print and documented procedures., • Maintains a clean and safe work area at all times., • Ability to use basic hand tools (i.e., utility knife) and machines (i.e., sandblaster, speed lathe)., • Ability to read blueprints/engineering drawings., • Good understanding of quality control principles., • Good communication and teamwork skills., • Complete daily production logs as required., • Complete required equipment maintenance checks., • Responsible for complying with internal quality systems and procedures. Required Skills, Education & Experience: • High School education or GED required., • Must be able to read and write English., • Must follow detailed instructions, do accurate work at a rapid pace and meet scheduling deadlines., • Manual dexterity and the ability to carry out complex, repetitive tasks quickly and methodically., • Available to work overtime as required., • While performing the duties of this job, the employee may be required to bend, squat, sit, stand, walk, and handle objects. The employee is occasionally required to push/pull and reach above shoulder level. The employee must be able to carry/lift up to 40 pounds and be able to rotate item being handled., • Work on feet for entire shift., • Must be a U.S. Citizen Preferred Skills, Education & Experience: • Previous mechanical or other manufacturing experience preferred., • Autoclave and/or Sandblast experience is a plus., • Experience with measuring equipment., • Ability to read part drawings (flag notes, dimensions, tolerances)., • Demonstrated leadership and ability to work with minimal supervision. RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace and defense markets. RBC currently has 56 facilities, of which 37 are manufacturing facilities in ten countries and the market capitalization is approximately $6.2 billion. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines, and land-based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Flexible Schedules, • 3 & 4-day work week, • ½ day Fridays Dedication to our core values. Our must haves… • Integrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities is fair, credible, confidential, fiscally responsible, and accountable for decisions and actions., • Respects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes, and supports the accomplishments, talents, and development of others. Key Skills & Abilities is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities is responsive with strong customer service skills, product, and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas, and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities is a dependable team player, demonstrated through attendance and punctuality, works well with others, and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing, and challenging environment. Key Skills & Abilities is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate, and never satisfied with the status quo. Key Skills & Abilities is innovative and has a problem-solving mindset that provides and implements CI ideas. EEO/AA/F/M/VET/DISABLED

Job Description Join the Sargent Legacy in Securing Our Future This will be a weekend shift position working Fri-Sun 6:00 am to 6:00 pm. With continual growth comes opportunity and Sargent has an immediate opening for a Manufacturing Tech I - E-Shift. Purpose and Scope: The purpose of this Manufacturing Tech I position is to process components through the liner process. Roles and Responsibilities: • Ensure safety is the foundation of daily work through vigilance and accountability., • Responsible for setting up and operating machinery in support of the production process., • Performs operations per specifications on drawing/print and documented procedures., • Maintains a clean and safe work area at all times., • Ability to use basic hand tools (i.e., utility knife) and machines (i.e., sandblaster, speed lathe)., • Ability to read blueprints/engineering drawings., • Good understanding of quality control principles., • Good communication and teamwork skills., • Complete daily production logs as required., • Complete required equipment maintenance checks., • Responsible for complying with internal quality systems and procedures. Required Skills, Education & Experience: • High School education or GED required., • Must be able to read and write English., • Must follow detailed instructions, do accurate work at a rapid pace and meet scheduling deadlines., • Manual dexterity and the ability to carry out complex, repetitive tasks quickly and methodically., • Available to work overtime as required., • While performing the duties of this job, the employee may be required to bend, squat, sit, stand, walk, and handle objects. The employee is occasionally required to push/pull and reach above shoulder level. The employee must be able to carry/lift up to 40 pounds and be able to rotate item being handled., • Work on feet for entire shift., • Must be a U.S. Citizen Preferred Skills, Education & Experience: • Previous mechanical or other manufacturing experience preferred., • Autoclave and/or Sandblast experience is a plus., • Experience with measuring equipment., • Ability to read part drawings (flag notes, dimensions, tolerances)., • Demonstrated leadership and ability to work with minimal supervision. RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace and defense markets. RBC currently has 56 facilities, of which 37 are manufacturing facilities in ten countries and the market capitalization is approximately $6.2 billion. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines, and land-based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Flexible Schedules, • 3 & 4-day work week, • ½ day Fridays Dedication to our core values. Our must haves… • Integrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities is fair, credible, confidential, fiscally responsible, and accountable for decisions and actions., • Respects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes, and supports the accomplishments, talents, and development of others. Key Skills & Abilities is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities is responsive with strong customer service skills, product, and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas, and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities is a dependable team player, demonstrated through attendance and punctuality, works well with others, and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing, and challenging environment. Key Skills & Abilities is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate, and never satisfied with the status quo. Key Skills & Abilities is innovative and has a problem-solving mindset that provides and implements CI ideas. EEO/AA/F/M/VET/DISABLED #zr

Job Description Join the Sargent Legacy in Securing Our Future This will be a second shift position working Mon-Thu 3:30 pm - 2:00 am. With continual growth comes opportunity and Sargent has an immediate opening for a Manufacturing Tech I - 2nd Shift. Purpose and Scope: The purpose of this Manufacturing Tech I position is to process components through the liner process. Roles and Responsibilities: • Ensure safety is the foundation of daily work through vigilance and accountability., • Responsible for setting up and operating machinery in support of the production process., • Performs operations per specifications on drawing/print and documented procedures., • Maintains a clean and safe work area at all times., • Ability to use basic hand tools (i.e., utility knife) and machines (i.e., sandblaster, speed lathe)., • Ability to read blueprints/engineering drawings., • Good understanding of quality control principles., • Good communication and teamwork skills., • Complete daily production logs as required., • Complete required equipment maintenance checks., • Responsible for complying with internal quality systems and procedures. Required Skills, Education & Experience: • High School education or GED required., • Must be able to read and write English., • Must follow detailed instructions, do accurate work at a rapid pace and meet scheduling deadlines., • Manual dexterity and the ability to carry out complex, repetitive tasks quickly and methodically., • Available to work overtime as required., • While performing the duties of this job, the employee may be required to bend, squat, sit, stand, walk, and handle objects. The employee is occasionally required to push/pull and reach above shoulder level. The employee must be able to carry/lift up to 40 pounds and be able to rotate item being handled., • Work on feet for entire shift., • Must be a U.S. Citizen Preferred Skills, Education & Experience: • Previous mechanical or other manufacturing experience preferred., • Autoclave and/or Sandblast experience is a plus., • Experience with measuring equipment., • Ability to read part drawings (flag notes, dimensions, tolerances)., • Demonstrated leadership and ability to work with minimal supervision. RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace and defense markets. RBC currently has 56 facilities, of which 37 are manufacturing facilities in ten countries and the market capitalization is approximately $6.2 billion. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines, and land-based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent’s continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company’s commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: • Competitive Compensation, • Bonus platforms, • Holidays/Vacation/Sick Time, • 401k Savings & Investment Plan, • Tuition Reimbursement, • Medical/Dental/Vision Plans, • HSA/FSA, • Life & Disability Insurance, • Accident/Hospital/Critical Care Plans, • Pet Insurance, • Gym & Rideshare Incentives, • Legal Insurance/Identity Theft, • Flexible Schedules, • 3 & 4-day work week, • ½ day Fridays Dedication to our core values. Our must haves… • Integrity - We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities is fair, credible, confidential, fiscally responsible, and accountable for decisions and actions., • Respects and Values People - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes, and supports the accomplishments, talents, and development of others. Key Skills & Abilities is committed to the building of strong relationships and creates an environment of trust and mutual respect., • Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities is responsive with strong customer service skills, product, and job knowledge to provide excellent customer satisfaction., • Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas, and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities is a dependable team player, demonstrated through attendance and punctuality, works well with others, and has strong communication skills (both oral & written) to keep all stakeholders informed., • Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing, and challenging environment. Key Skills & Abilities is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail., • Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate, and never satisfied with the status quo. Key Skills & Abilities is innovative and has a problem-solving mindset that provides and implements CI ideas. EEO/AA/F/M/VET/DISABLED

Job Description Who We Are: Barminco forms part of the Perenti Group, a diversified global mining services company. Barminco can offer you opportunities to take your career to the next level as one of the world's largest hard-rock underground mining companies, with operations in Australia, Africa and North America. The Perenti Group operates across a wide range of mining sectors and offers unique career progression opportunities. Barminco is looking for dedicated people that are eager to start a career in underground mining and join our vibrant team. The collective talent and expertise of our people is the key to our success, and we are looking for talented people to join us. We seek to build teams who are loyal, committed to our values and dedicated to delivering for our clients. In return, we provide state of the art facilities, equipment, technology and exciting opportunities to work on projects around the world. Job Title: Electrical Foreperson The Opportunity: Barminco Mining Services Canada Ltd. has an exciting opportunity for an Electrical Foreperson to join our team at a project location 65 miles outside of Elko, Nevada. Reporting to the Maintenance Superintendent or designate, the successful candidate will be responsible for providing safe and efficient electrical services to our projects and clients. In providing this service, the role contributes to achieving Barminco’s purpose, principles and aspirations. Location: 65 Miles outside of Elko, Nevada Shift: 16-days on / 12-days off rotation Accommodation: Camp and meals provided. Travel allowance may be available. Key Responsibilities: • Support and develop the Electrical crews to be effective in their roles., • Support the site leadership teams in the effective implementation of Barminco safety systems and initiatives to improve safety performance, as they pertain to the electrical function., • Establish and maintain electrical licenses as required for all Barminco US operations., • Develop and maintain electrical systems and procedures to ensure compliance with required US standards and legislation., • Assist with development of tenders and regular cost review, • Work with technology team to adopt and implement new electrical technology, • Review working areas of sites and ensure compliance with all relevant Acts and Regulations, Barminco’s and our clients policies, procedures, work instructions and standards., • Ensure visual leadership interactions are undertaken., • Support site electrical teams with planning., • Liaise with site Project Management and Operations Managers for any non-compliance and/or safety issues relating to site electrical concerns., • Minimum 10 years as an Underground electrician with 5 years minimum in Supervisory role, • Sound knowledge of US standards relevant to underground mining electrical systems, • Sound knowledge of developing and maintaining electrical management systems, • High school diploma or GED required; technical degree or certification in electrical engineering or a related field preferred., • Journeyman Electrician license required., • Strong knowledge of high-voltage systems, power distribution, and underground mining equipment., • Site-based role in an active underground mining environment with frequent exposure to mobile equipment, confined spaces, low light conditions, dust, diesel exhaust, and high noise levels., • Work performed in ventilation-controlled areas where air quality may vary depending on production activity and equipment operation., • Ability to walk and stand for extended periods on uneven, wet, muddy, or rocky surfaces throughout the shift., • Capacity to bend, stoop, kneel, crouch, climb ladders, and work effectively within confined underground spaces., • Must be able to lift and carry materials weighing up to 50 pounds unassisted; heavier items lifted with mechanical assistance or team support., • Manual dexterity and good eye-hand coordination - Required, • Visual acuity sufficient to distinguish colors, read markings, and operate safely in low-light conditions., • Auditory ability to hear alarms and verbal instructions and communicate effectively in high-noise environments while wearing required PPE., • Work performed on a rotational schedule with extended shifts (typically 12 hours) and compliance with site medical, respirator fit testing, drug and alcohol, and fitness-for-duty requirements., • Ability to do shift camp work on a rotational basis (Dayshift/Nightshift) minimum 12-hour days-Working statutory holidays as they fall within the rotation. - Required What We Offer: • Competitive salary, paid time off and comprehensive benefits., • Opportunities for career development and advancement within the company.

Job Description Optical Lab Technician Part-Time 30 years ago, Dr. Barnes founded Eyemart Express to deliver everything a patient needs. It started with one friendly shop in Appleton, WI, and has since expanded to over 245 in 42 states. Today, Eyemart Express is celebrated for promptly delivering quality eyewear at great prices while maintaining great relationships with optometrists and local communities. We’re not like everyone else, with local labs in stores, eye exams, and same-day delivery on glasses — our customers never miss a moment. Now, you can join one of the nation’s top optical retailers and improve lives by helping people see better. As an Optical Lab Technician, you'll be responsible for cutting, edging, and creating prescription lenses to ensure customers receive their new glasses in a timely manner. Your technical skills and attention to detail will contribute to our high standards of quality and service. Experience is preferred but not required, as we are willing to train the right candidate. Earning Potential: The earning potential for this role is competitive, inclusive of base pay and incentives. Responsibilities: · Lab Work: Identify and work with basic optical laboratory equipment, tools, supplies, and materials. Consistently adhere to hourly deadlines for finishing jobs. · Prescription Management: Correctly read and interpret prescription specifications and input into the computer to ensure lenses are cut properly. · Maintenance: Maintain the lab area and equipment in a safe and organized manner. Perform daily, weekly, and monthly lab equipment maintenance as scheduled and in accordance with lab/equipment manual specifications. · Operational Excellence: Perform multiple concurrent tasks at several different equipment stations to maintain acceptable job flow. Fill out all assigned reporting forms in a timely manner. Requirements: · High School Diploma or GED · Experience working in a lab or technical setting · Experience working in the optical industry is preferred · Must be able to read, comprehend, and follow technical manuals and protocols At Eyemart Express, we're dedicated to excellence in everything we do. We understand the importance of work-life balance and strive to be as flexible as possible with scheduling needs to ensure our team members can achieve harmony between work and personal life. If you're ready to join a company that values excellence, invests in your future, and respects your need for balance, submit your resume today! Eyemart Express is where your career takes off. This posting provides an overview of the role. A full job description will be provided upon hire. VSP Vision is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to age, gender, race, color, religion, sex, national origin, gender identity, sexual orientation, disability or protected veteran status. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Job DescriptionSalary: $22-$34 hourly DOE Job Summary Under the general direction of the Foreman (and Superintendent), the pipelayer has the general responsibility for assembling, connecting, and the installation of pipe systems for wet utilities (storm or sanitation sewers, drains, and water mains) and/or dry utilities (power, cable, communications, natural gas, and conduit). Responsibilities • Measure and mark pipes to required length for cutting and threading; cut, thread, hammer, and weld pipe to specifications using saws, pipe threaders, and benders; connect pipe pieces and seals joints, • Secure pipes to structures with clamps, brackets, and hangers, • Grout and clear manholes, • Inspect, examine, and test installed systems and pipe lines using pressure hydrostatic testing, observation, or other testing methods, • Locate existing pipes needing repair or replacement through potholing and/or excavation, • Tap and drill holes into pipes to introduce auxiliary line or devices, • Maintain a safe worksite and exhibit safe work practices by following company rules and OSHA regulations, including attendance at all required safety training programs, • Wear required Personal Protective Equipment (PPE) including hard hat, eye protection, reflective vest, gloves and composite-toed boots, • Be able to performs a wide variety of manual labor tasks involving dexterous use of hand tools such as pneumatic, electric, and hand tools Requirements • High School diploma or equivalent education, • 2 years of work related experience in laying underground wet utilities (storm or sanitation sewers, drains, and water mains) and/or dry utilities (power, cable, communications, natural gas, and conduit), • Knowledge of materials, production processes, quality control, costs, and other techniques for maximizing the effective installation or repair of pipelines, • Work within special standard of accuracy, • Must have flexibility in personal schedule including weekday, overtime with occasional night and weekend work, • Strong focus on safety, quality, integrity, productivity, and teamwork, • OSHA, confined space, and related safety training a plus, • Ability to stand and exert physical effort performing manual labor most of the day, • Ability to lift up to 60 pounds regularly and up to 100 pounds occasionally, • Ability to work in confined spaces, • Ability to understand and follow plans, drawings, and directions (verbal and written), • Willingness to wear required Personal Protective Equipment (PPE) including hard hat, eye protection, reflective vest, gloves and composite-toed boots, • Must be able to work safely outdoors in Arizona heat conditions and perform all job duties with no restrictions., • Knowledge of hand and power tools required to perform the duty of a pipelayer, • Knowledge or experience in underground dry and/or wet utility installation is a must, • Knowledge of street and highway traffic rules and regulations, and safety precautions to be observed in working on or near roads and highways, • Ability to detect unsafe or hazardous conditions of tools and work environment., • Thorough knowledge of safety standards and Underground Facilities Law (Blue Stake, Arizona 811), • Hold/obtain and maintain an OSHA 10 Certification, • Good communication skills and the ability to interact in a team environment, • Reliable transportation, • Bilingual English/Spanish a plus, • Ability to pass pre-employment and random drug tests Work Environment While performing the duties of this Job, the employee is regularly exposed to: • Wet and/or humid conditions, • Moving mechanical parts, • Precarious places and narrow spaces, • Fumes or airborne particles, • Outside weather conditions, • Extreme heat, • Frequent and/or sustained loud noises The employee is occasionally exposed to: • Toxic or caustic chemicals, • Risk of electrical shock, • Risk of vibration

Job Description Pay $70,000 - $75,000/year At The Country Club of La Cholla, we are dedicated to enriching the lives of our residents through compassionate care and unwavering support. We are seeking individuals who share our commitment to creating exceptional living experiences and who are eager to contribute to a supportive, family-like atmosphere. When you join The Country Club of La Cholla, you become an integral part of a team that values making a positive difference every single day. If you are driven by empathy and excellence, we invite you to bring your talents to our welcoming community. Full-time benefits include: • PTO (Paid Time Off) and Holiday Pay: Take advantage of paid time off to maintain a healthy work-life balance., • Daily pay: Get paid daily, providing you with financial flexibility and control over your earnings., • Health/Dental Insurance, • 401K with employer match: Plan for your financial future with our 401k program., • Life Insurance: Company paid life insurance, • Short and long-term disability: Financial security while you recover from an injury that puts you out of work, • Referral Bonuses: Refer qualified candidates and earn rewards, • Tuition Reimbursement: Invest in your education with our support The Sales Director’s primary responsibility is to maintain or exceed budgeted occupancy and revenue. The Sales Director position is responsible for internal and external sales functions to include lead generation as well as closing sales. The Sales Director develops and executes sales and marketing plans to include marketing events as well as networking with local civic groups, businesses, and medical and non-medical professionals. The Sales Director manages all leads, utilizing a lead management system and referral source database for tracking results. In communities with more than one sales associate, the Sales Director may also directly supervise and manage another sales associate. Essential Functions of the Sales Director • Meet or exceed budgeted occupancy and revenue., • Meet or exceed established Key Performance Metrics (KPI’s)., • Utilize The ENGAGE Experience sales process for internal and external sales functions., • Lead the creation of Strategic Sales and Marketing Trimester Plans with support from the Executive Director, Regional Director of Operations, and Regional Director of Sales., • Effective and successful execution of the Strategic Sales and Marketing Trimester Plans., • Appropriately plan and allocate marketing expenditures., • Adhere to the GMI Brand Style Guide with utilization and creation of any public-facing materials and press releases., • Maintain a current Competitive Marketing Analysis (to be updated at least twice each year)., • Pre-qualify sources of professional referrals in order to determine their eligibility to send qualified potential residents to the community., • Establish and maintain a professional relationship with key figures that have the ability to make or influence referrals to the community., • Conduct business development appointments, events, and presentations with key figures and their associates (i.e., physicians, medical professionals, rehabilitation hospitals, non-medical professionals, etc.) in order to build relationships and generate referrals., • Close sales by responding promptly and guiding residents, families, and/or advisors with making decisions; provide appropriate referrals and resources., • Establish a flexible work schedule that supports the demands of the community outside of typical business hours as needed to provide visits, respond to telephone inquiries, give presentations, set appointments with qualified prospects in order to close sales., • Maintain accurate and current information within the CRM to include lead management as well as referral source management., • Partner with the Executive Director to establish a sales culture within the community., • Train and coach associates on telephone etiquette/ inquiry process, visits, customer service., • Establish a thorough, working knowledge of base rates and care costs within assigned community and adjust with changes as necessary., • Maintain resident, associate, and community confidentiality and adhere to Residents Rights., • Build strong, trusting relationships with community and company associates., • Contribute to community relationships by demonstrating cooperation and professional conduct with residents, families, fellow associates, professionals, and vendors., • Contribute to team effort by being flexible in work assignments by furnishing support, by taking initiative, and by understanding how this position affects and compliments all other community positions., • Demonstrate a high level of organization, attention to detail, ability to meet deadlines, and timely communication., • Support the mission, vision, and culture of the organization through positive communication and leadership., • If applicable, provide direct supervision, guidance, and coaching for additional sales associate(s) within the community., • Bachelor’s Degree in Marketing, Business, Communications, or related field is strongly preferred; equivalent combination of education and experience is required., • Minimum of five years of relevant senor living industry experience with proven results., • Proficient in computer utilization including: Windows, Office, Word, Excel, Outlook, and CRM database systems., • Demonstrate excellent oral and written communication skills and proficiency with email processes and etiquette., • Demonstrate a positive attitude and interpersonal skills to work with various people including associates, residents, families, and professionals., • Promote positive work environment that emphasizes teamwork., • Respond positively to constructive feedback by listening to supervisor, customers, and peers and use it to improve performance., • Ability to travel for meetings as requested by supervisor., • Adherence to the Grace Management, Inc. Sales & Marketing Manual, all Policies and Procedure Manuals and Associate Handbook.

Job Description Position Summary: Provide hands-on manufacturing support, utilizing experience with machining and hardware production. Support the full product life cycle from research and development to low volume production. Provide machine set-up and testing support as required. Must be a responsible self-starter and take pride in their work. Description of Duties: -Must have a full understanding of G-code. -Assist with the initial set-up of CNC mills/lathes. -Participate in fixture design and manufacturability reviews. -Assist with development and documentation of hardware manufacturing and verification processes. -Must be capable of fabricating and assembling prototype hardware in a fast-paced aerospace environment. -Provide back-up lab technician support as needed -Diagnose product problems and communicate symptoms to manufacturing engineers -Must be able to inspect personal 1st piece components using a variety of hand inspection equipment prior to submittal to quality assurance. -Frequently lifts, carries or otherwise moves and positions objects weighing up to 50 pounds when setting up equipment. -Typically bends, stoops and crouches on a regular basis to adjust settings on machinery. -Perform other duties as assigned. Knowledge, Skills, and Abilities: -Knowledge of precision machining -Ability to read engineering drawings including GD&T per ASME Y14.5 -Knowledgeable in a variety of metal working tools and equipment. -Knowledge of and experience with Foreign Object Debris (FOD) and working within a visibly clean environment. Can implement and work to "clean as you go" best practices. -Knowledge of and proficiency in the safe use of mechanical measuring instruments -Familiar with working under ISO9001 & AS9100 requirements -Skill in maintaining a clean, safe work environment. -Ability to operate various assembly equipment, such as pneumatic riveters, helical installation tools (both manual and electric), and various torque wrenches. -Skilled in verbal and written communications. -Ability to stand, stoop, and crouch over 50% of the time -Ability to lift objects weighing up to 50lbs -Ability to read standard work instructions -Ability to solve routine problems independently -Ability to demonstrate self-initiative in a fast-paced environment with minimal supervision -Ability to establish and maintain effective, positive work relationships; have creativity, flexibility, and resourcefulness. -Ability to support production requirements as required for the safe operation of standard manufacturing equipment and machinery Must have a high standard in personal workmanship Job Posted by ApplicantPro

Job Description About Us Capital Pump & Equipment (CPE) is a leading provider of industrial pump rentals and fluid-handling solutions. We support critical industries with innovative equipment, responsive service, and deep technical expertise. We're known for keeping operations moving efficiently and we're looking for talented individuals to join our team! The Role We're seeking an Inside Sales Representative / Rental Coordinator to join our Tucson, Arizona branch. This hybrid role involves equipment rental coordination, inside sales support, and customer service. If you're detail-oriented, organized, enjoy working with customers and supporting internal teams, this is a great opportunity to grow your career in a dynamic, supportive workplace environment. What We Offer • Competitive salary pay with opportunities for growth., • Supportive, performance-driven team culture., • Comprehensive benefits package, including:, • Medical, dental, and vision (eligible after 30 days)., • 401(k) with company match., • Paid holidays and PTO., • Company-paid Short-Term Disability and Life Insurance., • Assist customers in selecting appropriate rental equipment, prepare rental agreements, and process sales orders., • Provide product demonstrations and explain equipment features and benefits., • Dispatch deliveries and communicate timelines clearly to customers., • Handle high-volume rental transactions and maintain accurate documentation., • Conduct daily yard walks to track equipment availability and coordinate with the service team on maintenance and equipment readiness., • Generate leads and refer opportunities to the Outside Sales team., • Work closely with Outside Sales Representatives, Service Technicians, and Branch Managers to meet sales goals., • High school diploma or GED required, associate or bachelor's degree a plus., • Prior experience in equipment rental, pump systems, or construction equipment sales preferred., • Eagerness to learn and grow within the organization. This entry-level field role offers opportunities for long-term growth and career development., • Strong customer service, sales, and communication skills., • Adaptable with the ability to multitask and thrive in a fast-paced, high-volume environment with frequently changing priorities., • Proficient in rental contracts, dispatching logistics, and CRM/order systems., • Willing to obtain forklift certification. CPE will provide training and certification. Ready to Apply? If you're a client-focused professional with a passion for sales and customer service, and ready to take the first step in a rewarding career, apply today and join the Capital Pump & Equipment team! Know someone who would be a great fit? Share this opportunity and encourage them to apply. Capital Pump & Equipment is committed to providing a safe and productive work environment. All offers of employment are contingent upon the successful completion of a background check and, where applicable, a pre-employment drug screening. By applying for this position, you acknowledge and agree that: * Employment is contingent upon passing all required background investigations, which may include verification of employment history, education, criminal history, and other relevant records as permitted by law. * You may be required to undergo drug and alcohol testing, consistent with applicable state and federal laws, as a condition of employment. * Refusal to submit to, or failure to successfully complete, any required screenings will result in withdrawal of any conditional offer of employment. Capital Pump & Equipment is an equal opportunity employer. We comply with all applicable laws regarding background checks and drug testing and make employment decisions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Description Description: Temp to hire (6 months) Pay rate: $19/hr 1st Shift Position Summary The Assembler 3 position performs disassembly, assembly, re-work and minimum testing of various electrical/electronic equipment Responsibilities • Use electric solder equipment to IPC-A-610B standard, • Cut, prepare and pre-tin wires, prepare batteries, apply conformal coat, marking and adhesive bonding, • Follow written and verbal instructions, • Complete work according to instructions, specifications and procedures, under direct and/or limited supervision, • Perform a variety of complex mechanical and/or electromechanical assembly operations in accordance with company instructions and procedures, • Conduct inspections of own and/or other associates work to insure correctness in accordance with company and/or customer drawing, • Minimum testing of various electrical/electronic equipment, as needed, • Maintain a clean and orderly workstation adhering to 5S standards, • Maintain an acceptable safety record, • Maintain an acceptable attendance record. Regular, consistent and punctual attendance is required. May need to work nights and weekends, variable schedule(s) and additional hours as necessary, • Adhere to all company guidelines, policies and procedures, • Able and willing to comply with Drug-Free Workplace policies and pass all related drug/alcohol screenings as required, • Assist other departments with job duties, tasks, training, and development as needed, • Other responsibilities as assigned Physical Requirements • Approximately 90% sitting and 10% standing/walking about in-door Company facilities, • Lift and Carry up to 35 lbs, • Use head and neck in static position, looking up/down and side-to-side, • Perform light lifting from floor, table and shelf, • Use hand tools, power tools and electric soldering gun, • Perform major hand grasping and fine finger manipulations using both hands, • Push and pull carts or mobile tables, loaded and unloaded, • Minimal: heavy lifting from floor or higher, bending, twisting, climbing, lifting arms above shoulders, kneeling, • Minimal: exposure to excessive noise, hazardous chemicals, hazardous equipment, uneven walking surfaces, • Typing with computer and keyboard Qualifications • Good mechanical aptitude, • Able to operate a variety of hand tools, power tools, electric soldering gun and light machinery; Proficient in using the tools, equipment, and inspection aids applicable to the scope of work assigned, • Capable of performing basic mathematics, • Ability to read and interpret company documents, such as safety rules, operating/ manufacturing instructions, policies and procedure, • Good manual dexterity required to work with small parts, • Able to problem-solve using existing procedures to perform straightforward tasks, • Effective oral, written and interpersonal skills, • Must be able to work all shifts and available for overtime and weekends as needed, • Able to perform complex mechanical and/or electromechanical assembly operation, • Capable of solving problems in situations that are atypical or infrequently occurring based on existing precedents or procedures, • Skilled at simple welding tasks and/or brazing, or soldering, • Experience with MS Office Suite Education & Experience Education: High School Diploma or equivalent Certifications: N/A Years of Experience: Minimum 5 years of prior related work experience in an electrical/avionics manufacturing/testing environment or completed OJT training for at least 10 products

Job DescriptionSalary: $16-$21 Medical Assistant (Ophthalmology/Optometry) (No Experience Necessary Training Program Provided) Start Your Career in Eye Care with Arizona Eye Consultants Are you looking for a career in the medical field but not sure where to start? Do you enjoy working with people, staying organized, and being part of a team? If so, a career as an Ophthalmic Technician (Medical Assistant) could be the perfect fit for you. Ophthalmic Technicians are among the most sought-after medical professionals. This role offers career growth, certification opportunities, and leadership potential. At Arizona Eye Consultants, youll receive full training to learn valuable skills and build a rewarding career in healthcare. About Us Founded in 2001 by Dr. Sean McCafferty, Arizona Eye Consultants is the largest and fastest-growing Ophthalmology/Optometry practice in Southern Arizona. • 16 providers across four Tucson locations, • Over 100 dedicated employees, • Specialties include glaucoma, cataracts, pediatric ophthalmology, and specialty contact lenses We offer a competitive benefits package including: • Medical, dental, and vision insurance, • 401(k) retirement plan, • Paid time off (PTO) and holiday pay for full-time employees Education & Experience • High school diploma required; some college preferred, • Experience in a professional, customer-focused environment is a plus. Essential Skills • Excellent communication and interpersonal skills, • Compassion and empathy toward patients, • Strong organizational skills and attention to detail, • Ability to work effectively as part of a team, • Computer literacy and eagerness to learn new systems Responsibilities Patient Interaction & Care • Greet new patients and explain office procedures, • Communicate the purpose of tests and how they may affect patients, • Perform accurate and consistent documentation and assist with tests/measurements, including:, • Visual acuity and manual lensometry, • Visual fields, stereo testing, and motility evaluation, • Pupillary function tests, color vision, and applanation tonometry, • Refractometry, dilation of pupils, contact lens evaluations, • Visual field testing and imaging (OCT, HRT, GDx), • Pachymetry and corneal topography, • Support physicians with additional diagnostic tasks as needed Why Join Us? • No prior experience neededcomprehensive training provided, • Career growth potential with certification and advancement opportunities, • Work with a team dedicated to providing the best patient care in Southern Arizona Apply today and take your first step toward a rewarding healthcare career!

Job Description Description: Temp to Hire Job Title: FAA Test Technician 1st Shift Pay rate: $23.15/hr Soldering experience required Job Designation The Test Technician position performs disassembly, assembly, re-work, and minimum testing of various electrical/electronic equipment. Job Core Responsibilities  Maintain a clean and orderly workstation.  Maintain an acceptable safety record.  Maintain an acceptable attendance record  Willing to learn to test and troubleshoot various products as required.  Completes necessary training to maintain knowledge and skills required for job performance  Follow written and verbal instructions.  Position requires overtime to production schedules and demands.  Adhere to all company guidelines, policies and procedures.  Self-monitor work progress against fast-paced area benchmarks and achieve on time delivery of all work  Assist with area efficiency and 6S improvement projects  Assist other departments with job duties and tasks, as needed within the scope of expertise  Perform maintenance and alteration tasks in accordance with the current technical data provided in the manufacturers’ instructions for continued airworthiness, services bulletins, service letters, airworthiness directives, government and industry standard practices, and other data acceptable to or approved by the FAA.  Complete work according to instructions, specifications and procedures, with limited supervision.  Properly record the work performed on the appropriate maintenance record.  Other responsibilities as assigned  Regular, consistent and punctual attendance is required. May need to work nights and weekends, variable schedule(s) and additional hours as necessary Physical Requirements  Approximately 80% sitting and 20% standing/walking about in-door Company facilities.  Lift and Carry up to 45 lbs.  Use hand tools, and power tools.  Use head and neck in static position, looking up/down and side-to-side.  Perform major hand grasping and fine finger manipulations using both hands.  Perform light lifting from floor, table and shelf.  Push and pull carts or mobile tables, loaded and unloaded.  Minimal: heavy lifting from floor or higher, bending, twisting, climbing, lifting arms above shoulders, kneeling.  Minimal: exposure to excessive noise, hazardous chemicals, hazardous equipment, uneven walking surfaces Job Specifications Education: High School Diploma or equivalent Certifications: N/A Years of Experience: 0-2 years prior work experience in an electronics Manufacturing/Testing environment Skills:  Ability to utilize manual and automated test equipment to test digital and analog circuitry.  Ability to read schematics and understand the circuit function.  Must be able to communicate fluently in technical terms both verbally and in writing.  Ability operate environmental test chambers  Experience with MS Office Suite  Must be computer literate.  Strong analytical and problem solving skills, resourceful, and able to work both independently and in a team environment" Completes work according to instructions, specifications and procedures. Conducts a variety of tests and verifications on electro and electromechanical equipment, while providing accuracy, productivity and on time delivery.

Job DescriptionSalary: $17.00 - $20.00 per hour Medical Scribe Ophthalmology/Optometry (No Experience Necessary Training Program Provided) Start Your Career in Eye Care with Arizona Eye Consultants Have you dreamed of working in the medical field but werent sure where to begin? Do you enjoy helping others, working in a team environment, and staying organized? If so, a career as an Ophthalmic Scribe may be the perfect fit. At Arizona Eye Consultants, youll receive complete training to become an Ophthalmic Scribeone of the most in-demand roles in healthcare. This position offers opportunities for career growth, certification, and advancement into leadership or management tracks. About Us Founded in 2001 by Dr. Sean McCafferty, Arizona Eye Consultants is the largest and fastest-growing Ophthalmology/Optometry practice in Southern Arizona. • 16 providers across four Tucson locations, • Over 100 dedicated employees, • Specialties include glaucoma, cataracts, pediatric ophthalmology, and specialty contact lenses. We offer a competitive benefits package including: • Medical, dental, and vision insurance, • 401(k) retirement plan, • Paid time off (PTO) and holiday pay (for full-time employees), • Travel may be required between clinic locations., • This position is full-time, Monday-Friday, closed on weekends. Education & Experience • High school diploma required; some college preferred, • Experience in a professional, customer-focused environment Essential Skills • Strong communication and interpersonal skills, • Empathy and concern for patient needs, • Excellent organizational skills and attention to detail, • Ability to work effectively as part of a team, • Computer literacy and willingness to learn new systems Responsibilities Patient Interaction & Communication • Greet new patients and explain office procedures, • Inform patients about tests and how they may be affected, • Perform accurate documentation and assist with clinical measurements, including:, • Visual acuity and manual lensometry, • Visual fields, stereo testing, and motility evaluation, • Pupillary function tests, color vision, and applanation tonometry, • Refractometry, dilation of pupils, and contact lens evaluations, • Imaging and diagnostics (OCT, HRT, GDx, pachymetry, corneal topography), • Support physicians with additional tasks as needed Why Join Us? • Hands-on training providedno prior experience required., • Career growth opportunities with certification and advancement potential, • Be part of a team helping improve lives across Southern Arizona Apply today and start your career with some of the best providers in Tucson!