Manual testing jobs in Houston, TexasCreate job alerts

At Houston Methodist, the Medical Laboratory Scientist position is responsible for performing both routine and complex analyses, which necessitates knowledge of laboratory techniques, principles, and equipment and their interrelationship. This position exercises good judgment by using critical thinking skills and deals with issue resolution concerning the day-to-day technical operation of the laboratory. The Medical Laboratory Scientist also ensures that specimens are accessioned and processed expeditiously in order to deliver quality laboratory results in an effective and cost-efficient manner. PEOPLE ESSENTIAL FUNCTIONS • Promotes a positive work environment and contributes to a dynamic, team-focused work unit that actively helps one another to achieve optimal department results. Collaborates with all members of the patient care team by actively communicating and reporting pertinent patient care information and data in a comprehensive manner., • Teaches students, new employees and others as assigned by Manager., • Participates in laboratory and organization-wide initiatives. SERVICE ESSENTIAL FUNCTIONS • Performs qualitative and quantitative tests and examination using various analyzers and/or manual methods., • Organizes workload and sets priorities. Utilizes all available work time by assisting others and performing additional tasks., • Meets turnaround time expectations as defined by management. QUALITY/SAFETY ESSENTIAL FUNCTIONS • Demonstrates the six elements of competency for test systems used to generate patient test results in all areas assigned to work., • Recognizes, investigates and helps resolve test discrepancies. When problems arise, takes appropriate action to investigate and address and notifies management and the medical director for follow-up., • Performs instrument calibrations, validations, quality control testing, maintenance, and function checks. FINANCE ESSENTIAL FUNCTIONS • Adjusts work schedule to accommodate departmental/organizational needs. Appropriately utilizes the time recording system., • Uses resources efficiently; does not waste supplies. Re-stocks section inventory levels as needed. GROWTH/INNOVATION ESSENTIAL FUNCTIONS • Seeks opportunities to expand learning beyond baseline competencies with a focus on continual development., • Reviews and utilizes Standard Operating Procedure and offers suggestions for improvement. This job description is not intended to be all-inclusive; the employee will also perform other reasonably related business/job duties as assigned. Houston Methodist reserves the right to revise job duties and responsibilities as the need arises. EDUCATION • Bachelor's degree WORK EXPERIENCE • Must meet certification eligibility upon entry into this role and have one of the following required certifications within 18 months:, • • Certified as a Medical Technologist, Clinical Laboratory Scientist, Medical Laboratory Scientist, or categorical certification by Board of Certification (ASCP), • • Certified as a Medical Technologist, Medical Laboratory Scientist or Molecular Diagnostics Technologist by American Medical Technologists (AMT), • • Certified as a Clinical Laboratory Scientist by National Credentialing Agency for Laboratory Personnel (NCA), • Demonstrates the skills and competencies necessary to safely perform the assigned job, determined through ongoing skills, competency assessments, and performance evaluations, • Sufficient proficiency in speaking, reading, and writing the English language necessary to perform the essential functions of this job, especially with regard to activities impacting patient or employee safety or security, • Ability to effectively communicate with patients, physicians, family members and co-workers in a manner consistent with a customer service focus and application of positive language principles, • Adapts to multiple ongoing priorities including organizing heavy workflow with minimal supervision, • Strong attention to detail and ability to achieve and maintain accuracy, • Demonstrates independent judgment and discretion to recognize problems, identify causes and take corrective action, • Possesses basic computer knowledge; operates multiple computer systems to include, Hospital/Laboratory Information Systems and Office software to maintain patient and testing records and other related documents, • Demonstrates the ability to work independently with little or no direct supervision WORK ATTIRE • Uniform No, • Scrubs Yes, • Business professional Yes, • May require travel within the Houston Metropolitan area Yes Houston Methodist West Hospital is committed to leading medicine in West Houston, Katy and surrounding communities by delivering the Houston Methodist standard of exceptional safety, quality, service and innovation. The growing campus offers 253 beds and access to the most innovative medical and surgical care available, including cardiology and cardiovascular surgery; neurology and neurosurgery; comprehensive cancer care; orthopedics and sports medicine; gastroenterology; bariatrics; childbirth center with level III NICU; emergency care; and advanced imaging. Houston Methodist is an Equal Opportunity Employer.

At Houston Methodist, the Medical Laboratory Scientist position is responsible for performing both routine and complex analyses, which necessitates knowledge of laboratory techniques, principles, and equipment and their interrelationship. This position exercises good judgment by using critical thinking skills and deals with issue resolution concerning the day-to-day technical operation of the laboratory. The Medical Laboratory Scientist also ensures that specimens are accessioned and processed expeditiously in order to deliver quality laboratory results in an effective and cost-efficient manner. PEOPLE ESSENTIAL FUNCTIONS • Promotes a positive work environment and contributes to a dynamic, team-focused work unit that actively helps one another to achieve optimal department results. Collaborates with all members of the patient care team by actively communicating and reporting pertinent patient care information and data in a comprehensive manner., • Teaches students, new employees and others as assigned by Manager., • Participates in laboratory and organization-wide initiatives. SERVICE ESSENTIAL FUNCTIONS • Performs qualitative and quantitative tests and examination using various analyzers and/or manual methods., • Organizes workload and sets priorities. Utilizes all available work time by assisting others and performing additional tasks., • Meets turnaround time expectations as defined by management. QUALITY/SAFETY ESSENTIAL FUNCTIONS • Demonstrates the six elements of competency for test systems used to generate patient test results in all areas assigned to work., • Recognizes, investigates and helps resolve test discrepancies. When problems arise, takes appropriate action to investigate and address and notifies management and the medical director for follow-up., • Performs instrument calibrations, validations, quality control testing, maintenance, and function checks. FINANCE ESSENTIAL FUNCTIONS • Adjusts work schedule to accommodate departmental/organizational needs. Appropriately utilizes the time recording system., • Uses resources efficiently; does not waste supplies. Re-stocks section inventory levels as needed. GROWTH/INNOVATION ESSENTIAL FUNCTIONS • Seeks opportunities to expand learning beyond baseline competencies with a focus on continual development., • Reviews and utilizes Standard Operating Procedure and offers suggestions for improvement. This job description is not intended to be all-inclusive; the employee will also perform other reasonably related business/job duties as assigned. Houston Methodist reserves the right to revise job duties and responsibilities as the need arises. EDUCATION • Bachelor's degree WORK EXPERIENCE • Must meet certification eligibility upon entry into this role and have one of the following required certifications within 18 months:, • • Certified as a Medical Technologist, Clinical Laboratory Scientist, Medical Laboratory Scientist, or categorical certification by Board of Certification (ASCP), • • Certified as a Medical Technologist, Medical Laboratory Scientist or Molecular Diagnostics Technologist by American Medical Technologists (AMT), • • Certified as a Clinical Laboratory Scientist by National Credentialing Agency for Laboratory Personnel (NCA), • Demonstrates the skills and competencies necessary to safely perform the assigned job, determined through ongoing skills, competency assessments, and performance evaluations, • Sufficient proficiency in speaking, reading, and writing the English language necessary to perform the essential functions of this job, especially with regard to activities impacting patient or employee safety or security, • Ability to effectively communicate with patients, physicians, family members and co-workers in a manner consistent with a customer service focus and application of positive language principles, • Adapts to multiple ongoing priorities including organizing heavy workflow with minimal supervision, • Strong attention to detail and ability to achieve and maintain accuracy, • Demonstrates independent judgment and discretion to recognize problems, identify causes and take corrective action, • Possesses basic computer knowledge; operates multiple computer systems to include, Hospital/Laboratory Information Systems and Office software to maintain patient and testing records and other related documents, • Demonstrates the ability to work independently with little or no direct supervision WORK ATTIRE • Uniform No, • Scrubs Yes, • Business professional Yes, • May require travel within the Houston Metropolitan area Yes Houston Methodist West Hospital is committed to leading medicine in West Houston, Katy and surrounding communities by delivering the Houston Methodist standard of exceptional safety, quality, service and innovation. The growing campus offers 253 beds and access to the most innovative medical and surgical care available, including cardiology and cardiovascular surgery; neurology and neurosurgery; comprehensive cancer care; orthopedics and sports medicine; gastroenterology; bariatrics; childbirth center with level III NICU; emergency care; and advanced imaging. Houston Methodist is an Equal Opportunity Employer.

Company Description John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description Sets up, writes programs and edits existing programs, and operates numerically controlled machinery. These include but are not limited to lathes, mills, drills, and other machinery as required. \n • Maintains quality and tolerances within .0003".\n, • Follow written and verbal procedures for machining and other duties.\n, • Work from work order routings, prints, sketches, layout sheets, written and verbal instructions.\n, • Working knowledge of programming languages and the ability to learn / adapt per machine.\n, • Must be able to recognize and understand functions of machine parameters with the ability to modify as required per supervisor's instructions.\n, • Utilize knowledge of working properties for a variety of materials such as stainless steel, alloy steel, cast iron, brass, exotics, etc.\n, • Presets tools and may be required to re-sharpen.\n, • Inspect work produced using micrometer; bore gage, venire calipers, or other measuring instruments to verify conformance to specifications.\n, • Follow preventative maintenance procedures on equipment as prescribed by supervisor and report operating difficulties of equipment to supervisor.\n, • Perform duties in accordance with company safety policies, reports unsafe conditions to supervisor.\n, • Make proper labor and time reports.\n, • Perform other duties as required.\n, • Keep machine(s) / work area clean and orderly.\n, • Perform additional duties and responsibilities based upon individual branch requirements.\n, • Additional duties as assigned.\n\n Qualifications \n • High school diploma or equivalent with a technical school education and working machinist knowledge or equivalent.\n, • Minimum 3 years of CNC machine tool Programming & Operating experience.\n, • Numerical control machining skills experience and ability to read and interpret work related machine drawings.\n, • Make average to complicated mathematical calculations and resolve elementary technical problems.\n, • CNC Programmer/Operator will be compensated in accordance with defined expertise, experience and production efficiency.\n, • Can operate a minimum of 2 CNC machine tools.\n, • Possesses previous experience as a Manual machinist.\n, • Must be detail oriented; be able to work independently using sound judgment.\n, • Good verbal, written, problem solving and organization skills required.\n, • Capable of handling multiple priorities.\n, • Ability to complete tasks in a timely and efficient manner.\n\n Additional Information With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

Job Description Valet Attendant- George Bush International Airport (IAH) JOB TITLE: Valet Attendant DEPARTMENT: Parking Operations DIVISION/LOCATION: Houston, Texas Pay Rate: $16.00/hr SHIFT: 10:00 PM-06:30 AM Global Parking Systems are experts in the management of parking lots, valet services, parking management and shuttle operations at airports across the country. Global Parking Systems also partner with SP Plus Parking Corporation, a leader in the parking management space. Together, we are committed to making the parking experience a first-class enjoyable one for parking consumers. Built on the foundation of excellence and integrity, we are dedicated to providing the highest level of service at all of our parking facilities. MAIN RESPONSIBILITIES Basic Function: Drive, park and retrieve customer cars in a safe and courteous manner and assist customers in and out of their vehicle. Valet Attendants play a crucial role in making sure all customers are given a professional, courteous and timely valet service. Responsibilities Responsibilities include but are not limited to the following: • Responsible for being at work every scheduled day, on time, • Maintain a neat and clean appearance and arrive and remain in complete uniform before and during scheduled shifts, • Inspect each vehicle before taking possession and mark tickets of findings, • Inform customers of valet rate, • Report any known accidents, observed or suspected violations of Company policy, safety hazards or any unusual occurrence to Supervisors, the Facility Manager and/or the Senior Manager, • Have a thorough knowledge of the major streets, landmarks and freeways in the area of the lot to be able to provide customer directions to customers to various locations in the area, if needed, • Respond to customer questions in a prompt and courteous manner, • Observe all traffic laws and safe driving practices Qualification Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience Required: Less than High School education or one-month related experience, training or an equivalent combination of education and experience. Prior valet driving experience preferred. License Requirement: The employee will be required to have and maintain a valid state driver’s license with a current address and acceptable driving record. Ability to drive a vehicle with a manual transmission (stick shift) a plus. Availability to Work: If applicable, availability to work 2nd shift, 3rd shift and/or week-ends may be required. Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one situations to customers and other employees of the company. Customer Service Skills: Ability to effectively respond positively to customer problems or complaints. Mathematical Skills: Ability to add, subtract, two digit numbers and multiply and divide with 10’s and 100’s. Ability to perform these operations using units of American money. Appearance: Employees will be required to maintain a neat and clean appearance and be in complete uniform at all times. Other Attributes: Ability to apply common sense understanding to carry out detailed but standard written or oral instructions. Ability to adapt to changes in the work environment; able to deal with change, delays or unexpected events. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to handle cash and equipment. The employee is occasionally required to sit and climb or balance. The employee must occasionally lift and/or move up to 25 pounds. Benefits Include: After 90 days full time employees become eligible for dental, medical, and vision insurance, paid holidays, sick time, and vacation. THIS IS A NON-EXEMPT/HOURLY POSITION. CRIMINAL BACKGROUND CHECK AND PRE-EMPLOYMENT DRUG TESTING IS REQUIRED. Global Parking Systems is an equal opportunity/affirmative action employer. Qualified applicants will be considered without regard to race, religion, color, national origin, gender identity, sexual orientation, age, marital status, protected veteran status, or disability status.

Job Description: Welder Pay: $19.00 - $20.00 based on testingAttendance bonusRESPONSIBILITIES • Grind barge boat repair areas, internal compartments cargo tanks, and external surface areas in preparation for welding., • Weld barge boat repair areas, internal compartments cargo tanks, external surface areas, and specialty components areas with the required number of passes to achieve full penetration welds., • Operate welding grinding equipment, blowers, hoses, etc., to accomplish weld repair duties., • Must pass a welding test to obtain internal skill classification., • Mandatory drug testing prior to employment, and will be subject to random, unannounced drug and/or alcohol tests during employment., • Must be able to communicate and take directions from Foreman Supervisor., • Able to work without contact lenses., • Required to arrive to work on time and also work overtime hours as required., • Understand general policies and procedures as described in the quality environmental manuals., • Required to undergo a training program and participate in refresher training as needed., • Must have or be eligible for a TWIC card.EXPERIENCE QUALIFICATIONS, • Must be proficient in English and be able to communicate effectively with others; Bilingual English/Spanish preferred., • Ability to multitask, learn quickly, and meet deadlines as needed., • Ability to understand Company Quality Manual and procedures described and required., • Ability to manage time and tasks effectively and efficiently., • Medical Coverage, • Dental Coverage, • Vision Coverage, • Short Term Disability Benefits, • Term Life Benefits, • Note: The specific duties, skills and qualifications may vary depending on the companys requirements and the nature of the tasks performed at the site. Employees must be willing to make reasonable adjustments to their tasks depending on the requirements of the client. We are an equal opportunity employer. We do not discriminate based on race, color, creed, religion, national origin, ancestry, citizenship status, marital status, age, sex, sexual orientation, gender identity, disability, veteran status, or any other protected characteristic as established by law. #ZR

Job Description Tacoma Energy Looking for a highly driven person who wants to join a growing company in the new energy efficiency industry. * Not a sales position * * No homeowner interaction * We are looking for an outstanding person who wants to learn a new and rapidly expanding industry. This person must be willing to learn from the ground up. On the job training, education and certifications are provided. This position will be primarily located in the Houston TX area. We offer: • Starting pay $20.00-24.00/hour, based on experience, • Healthcare – medical, dental, vision, • Holiday pay, • Full-time, • On the job training & certifications, • Identify areas of the home which may result in air leakage or duct system leakage, • Trouble shoot and identify reasons for whole house air leakage or duct test failures, • Adhere to all safety policies and procedures, • Will travel throughout Houston area daily, • Inspect and conduct checks on newly constructed homes with blower door & duct blaster, • Valid driver’s license, • Pass background check, including driving record, • Previous experience in HVAC or other related fields is a HUGE PLUS, but not required, • Familiarity with HVAC systems a plus, • New home construction experience a plus, • Ability to handle physical workload – lift up to 50 lbs, • Strong problem solving and critical thinking skills, • Mechanically inclined, • Get it done mentality, • Team player, • Must follow directions We look forward to hearing from you today! Company DescriptionTacoma Energy provides Energy Certifications and analysis of single and multi family homes to ensure they pass code, Energy Star, Tax Credit, and other certifications. They are also responsible for home inspections for new construction homes, as well as HVAC design. Tacoma Energy has years’ of experience in the field of Energy Auditing, Training, Testing, Managing, Manual J,D, and S calculations for Heating Ventilation and Air Conditioning, Energy modeling through Performance and Building Code Support. Today we have locations in multiple cities and continue to expand.Tacoma Energy provides Energy Certifications and analysis of single and multi family homes to ensure they pass code, Energy Star, Tax Credit, and other certifications. They are also responsible for home inspections for new construction homes, as well as HVAC design. Tacoma Energy has years’ of experience in the field of Energy Auditing, Training, Testing, Managing, Manual J,D, and S calculations for Heating Ventilation and Air Conditioning, Energy modeling through Performance and Building Code Support. Today we have locations in multiple cities and continue to expand.

Job Description Candidate must be a licensed or certified CNA, MA, or LVN. Position Summary The TCC is responsible for technical skills encompassing patient care and related tasks under the direction of a Doctor, Physician’s Assistant and or Nurse Practitioner. The TCC works closely with patients and medical staff to ensure proper use of equipment and telehealth visit is accomplished. General Duties and Responsibilities The essential functions include, but are not limited to the following: • Delivering direct patient care to patients as assigned, using established procedures, • Documenting history; recording and reporting pertinent observations and patient reactions to staff, as appropriate. documenting lab procedures and ensuring follow up on results, • Using screening procedures, including medical history review, and observing and documenting patient vital signs as required, • Maintaining quality results by running standards and controls, • Verifying equipment function through routine equipment maintenance and advanced trouble shooting; calibrating equipment utilizing approved testing procedures; monitoring quality control measures and protocols, • Training other TCC’s or other workers The essential functions include, but are not limited to the following: • Acknowledge receipt of scheduling email with the administrative team. Ensure consent forms are in place before scheduled visits., • Introduce yourself to the patient each visit., • Explain consent forms and obtain the patient's or legal guardian's signature on the forms., • Obtain the patient's pharmacy information., • Take patient's vital signs and document for provider., • At the designated time, contact the provider to initiate an evaluation., • Support phone/iPad for the patient's for duration of the evaluation., • Once the evaluation is completed, TCC will end the communication with the Clinical provider, thank the patient for the evaluation and leave the patient in a comfortable position before leaving the patient's home and or SNF bed., • At no time will the TCC offer his/her services to a patient, Agency, or SNF, that they have provided services to or been introduced by PAS. Any infraction of this policy is a term for immediate discharge from employment., • TCC dress code will be nursing scrubs. Appearance and personal behavior will always be professional when dealing with patients, family members, agencies, or skilled nursing facility staff. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. While performing the duties of this position, the employee is regularly required to work inside a clean, well-lit, and well-ventilated facility. While performing the duties of this position, the incumbent is regularly required to talk or hear. The employee frequently is required to use hands or finger, handle, or feel objects, tools or controls. The employee is occasionally required to stand; walk; sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision and the ability to adjust focus. The noise level in the work environment is usually moderate. The employee may be exposed to some hazards such as radiation, bodily fluids that may contain disease, and fumes from laboratory chemicals. Note This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship. Preferred Qualifications (Knowledge, Skills, and Abilities) • The candidate should be based in Houston, TX or in a nearby area., • High school diploma or equivalent combination of education required, • CNA, LVN, MA License – must be current in CPR certification., • Accredited college degree or certificate highly desirable, • Knowledge of healthcare regulations and preventative measures (HIPAA confidentiality, infection spread, etc.), • Exemplary patient care experience and job knowledge, • Excellent oral and written communication skills, • Ability to prioritize and manage time effectively; ability to critically think, • Knowledge of quality control, • Ability to exercise manual dexterity, control precision and arm-hand steadiness accurately, • Ability to be empathetic with patients; ability to maintain confidentialityCompany DescriptionPost Acute Specialists is a multi-specialty group dedicated to improving access to medical specialists through telehealth. We partner with skilled nursing facilities, assisted living communities, and home health agencies to ensure patients receive high-quality, compassionate care without unnecessary hospital visits. Our team of providers and care coordinators is committed to innovation, patient comfort, and better outcomes across the post-acute care continuum.Post Acute Specialists is a multi-specialty group dedicated to improving access to medical specialists through telehealth. We partner with skilled nursing facilities, assisted living communities, and home health agencies to ensure patients receive high-quality, compassionate care without unnecessary hospital visits. Our team of providers and care coordinators is committed to innovation, patient comfort, and better outcomes across the post-acute care continuum.

Job Description • Responsible for installing, calibrating, configuring, testing, maintaining, evaluating, troubleshooting, pre-commissioning, commissioning and repairing as necessary, waste water equipment manufactured by, but not limited to Huber Technology Huber equipment, pumps, motors, valves, polymer stations, etc., • Perform scheduled maintenance or repair of the equipment and all other associated equipment, • Perform unscheduled maintenance or repair of the equipment and all other associated equipment, • Perform installation of the equipment at customer sites as well as conducting pre-installation assistance, • Review blueprints, plans, specifications and other customer documentation to prepare for startup or service., • Responsible for on-site training of customer personnel to Huber Technology standards., • Build customer relationship in a professional manner through solution-oriented communications and service, providing both on-site and telephone support., • Work with engineering, project management group, spare parts group and management to resolve escalated problems, • Provide written reports to the Director of Service on all activities carried out on site and complete all required documentation in a timely manner., • Provide expense reports to the Director of Service on all expenses occurred out on site and completes all required documentation in a timely manner., • Make technical recommendations to maintenance technicians and or treatment plant operators., • Work closely with the Director of Service, Aftermarket Sales Team and Operations Team, to ensure that site work is carried out in the required order, for completion by the required time., • To develop and maintain at all times due regard for safe working practices on site and to report any breaches of health & safety manners to the Environmental Health and Safety Coordinator and/or the Director of Service., • To undertake any appropriate technical activities that may not be related directly to site, as may be allocated to you from time to time by the Director of Service., • To ensure that materials, tools and equipment provided to you to carry out your work are kept safe, secure and in good order., • Ensure all tools and equipment is relevant, up to date and calibrated in accordance with Huber Technology requirements., • Assist when needed in manufacturing or engineering with customer projects as well as unit refurbishment or replacement at the customer site or Huber Technology manufacturing facility., • Properly document, label, and return all defective parts utilized in the repair of the equipment, • Educate the customer on basic operation of their equipment, • Assist when needed in the parts department with recommending spare parts and wear parts to existing and new customers, • Perform all welding activities that are required in the shop and/or customer site, • To take responsibility for ensuring that all necessary travel, medical and associated documentation is valid and kept up to date and to inform the Field Service Manager in adequate time to procure any replacements, • Provide in-depth troubleshooting via phone with customers in the field, • Provide technical assistance to all representatives of Huber Technology, Inc. in the field, • Assist customers with via phone and in the field with on application and process related issues, • Assist the Director of Service, V.P. of Operations and Aftermarket Sales Consultants with identification of warranty vs. non-warranty issues, • Maintain a professional appearance towards customers on the telephone and by correspondence as well as in person, • Take responsibility for ensuring that all necessary documentation is valid and kept up to date and to inform the Director of Service in adequate time to procure any replacements., • Uniforms are provided by Huber Technology, Inc.; Field Service Specialists are required to be in uniform at all times during their normal work. It is extremely important that the Field Service Specialist maintain a clean, professional appearance at all times, • Provide technical support to other Field Service Specialists in the field, • Comply with all safety policies, practices and procedures, • Participate in proactive team efforts to achieve departmental and company goals, • Accepts other responsibilities as requested by the Service Manager or Director of Service III. EDUCATION AND EXPERIENCE: • An Associate’s Degree in a technical field or equivalent mechanical-industrial repair/service work experience, minimum 1-2 years in related field or an equivalent combination of education and experience. Wastewater experience a plus IV: ADDITIONAL SKILLS AND ABILITIES • Must have attitude and aptitude to develop a high level of customer service skills, as well as the ability to respond quickly to service calls with good time management and planning, • Must be motivated and fast paced personality with serious work ethic, • Must work effectively with little or no supervision once trained/onboarded, • Take responsibility to physically be able to perform the job requirements, • Able to read, write and have good oral communications skills in English, other languages a plus, • Computer ability should be proficient for producing required reports, • Must maintain a valid Driver’s License to drive rental vehicles & able to pass a DOT physical for driving fleet vehicles as required, a CDL is not required, • Must be able to drive a forklift or able to be trained, • Ability to travel – Road Warrior –via whatever method required (up to 100%) United States and Canada, • Maintain company provided equipment, tools and or fleet vehicle as per company policy., • Candidates must be located within close proximity to a major airport PHYSICAL DEMANDS The physical demands described here are representative of those that expected by an employee to be able to successfully perform the essential functions of this Field Service Specialist role: • Moderate to occasional heavy physical demand with exposure to dust in warehouse, hot and cold climates, inside and outside exposure when on the job, odors and noise may also be present., • Routinely moves, carries or lifts 25-50+ pounds such as required tools, laptops, PPE and suitcase, • Regularly required to stand, reach, bend, squat, push, pull and move about the facility or job-site, • Walk or stand at least 8+ hours per day, often ascends/descends ladders or steps on job-site or stairs/steps boarding or de-boarding airplanes., • Sit for flights or automobile or boat trips as required, • Able to use hands and able to follow safety guidelines, for both mechanical tools, manual tools, and computer entry., • Good hearing and vision are important to the Field Specialist’s safety on the job, • Consistent attendance due to advance planning & sometimes tight schedules and flight bookings required to meet the needs of our customers and job budgets – some weekend travel, late or early flights may be required due to weather, customer needs or delays at Airports, • Due to wastewater environment on site visits, must keep inoculations current as recommended for employee safety when on customer sites and at facilities Pre-Hire: This role requires ability to pass a pre-hire drug test, random safety/drug testing, pre-hire background check and completion of an I-9 form. HUBER is an E-Verify Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin

Job Description Position Title: Hospital Services Representative - Driver Join our team of heroes! Are you looking for more than a job? We are hiring a great driver, customer service oriented, good communication skills, honesty and integrity, is flexible, self-dependent, reliability and time management skills. The Driver is responsible for transporting blood from donor sites to Component Laboratory and conduct the delivery of blood components to designated locations while maintaining proper record keeping. This role is great for those who will ensure safety, is efficient, and great with time-management. Just For You: • Career advancement opportunities., • Competitive compensation and benefits package., • Engaging and exciting opportunity to SAVE LIVES. Tips to thrive in our culture: • Embody our Core Values of Commitment, Integrity, and Respect, • Work to actively create experiences that inspire others to save lives, each and every day., • Embrace doing it right, making connections, and creating desired experiences., • Comply with all organizational policies and standards, including safety rules, and be willing to report actual and potential violations to the appropriate supervisor or manager. In this role, you will: • Deliver blood components to and return from designated locations., • Perform visual inspections and verify numbering/labeling/appearance of all units selected for delivery to ensure quality control standards are met., • Place returned units on designated observation shelves, notifying supervisor or laboratory personnel of any abnormalities., • Perform the Stoplight computer check on each consignment delivered to ensure the product is within acceptable date ranges and all products from that consignment are in the delivery., • Properly complete all required paperwork documents for consignment and return of blood components to designated locations., • Ensure compliance with acceptability standards as set forth in the Vehicle Safety and Loss Control Policy, Standard Operating Procedures Manual and various other policies, procedures and protocol. We need someone who has: • High School Diploma or GED, • Valid Texas Driver's License (TDL) plus acceptable driving record. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must regularly lift and/or move up to 50 pounds. Employees are required to be familiar with and abide by the team lift requirements as specified in the Safety Program. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to toxic or caustic chemicals, outside weather conditions, extreme cold, and blood and/or blood components, as well as any other biohazard materials. The noise level in the work environment is usually moderate. Job duties involve an inherent potential for mucous membrane or skin contact with blood with a risk of exposure to Hepatitis and HIV. Who We Are: Since 1975, Gulf Coast Blood has been one of the nation’s largest community blood centers, serving 170 hospitals across 26 counties. Headquartered in Houston, we support the world’s largest medical complex—the Texas Medical Center—while operating 18 donor centers and hosting more than 7,000 mobile blood drives each year. As an FDA-accredited nonprofit, we provide high-quality human cellular material for both scientific and therapeutic use. Some Jobs Change Lives. Others Save Them. Think you have what it takes to save lives with us? We want to hear from you. EQUAL OPPORTUNITY EMPLOYER STATEMENT Gulf Coast Blood is an Equal Employment Opportunity Employer. Qualified applicants for positions are considered without regard to race/ethnicity, color, religion, national origin, age, pregnancy, sex, sexual orientation, gender identity, transgender status, military status, protected veteran status, disability status, genetic testing results, or any other basis or characteristic prohibited by applicable law, statute, regulation or Executive Order.

Job Description Do you enjoy working outdoors, independently and traveling to different areas? Do you have experience working with your hands, in a manual and physical environment? Are you looking to jump start your career in a different industry? Well, you can stop looking! Degesch America, Inc. has immediate openings for General Laborers to assist with fumigations. We are looking for reliable, dependable, "go-getters", who can to work independently, as well as within a team setting and can hit the ground running! If this describes you, please apply and come check us out! DEGESCH America, Inc. (DAI) was founded in 1977 and is the United States arm of German-based Detia Degesch Group. Our corporate headquarters and production facility are situated in the Shenandoah Valley town of Weyers Cave, Virginia. This facility opened on March 15, 1979, and is the only producer of aluminum phosphide (Phostoxin ®) and magnesium phosphide (Magtoxin ®) fumigants in the United States. Through our nationwide network of Sales and Service Offices, we provide a wide range of fumigants, insecticides, rodenticides, grain protectants, safety equipment, and training to companies handling raw agricultural commodities and finished food products. We are currently searching for Part Time Laborer positions who will assist in the fumigation process for our Houston, TX Division Office. This is a safety sensitive position and requires climbing ladders, steps, and gangways and kneeling, bending, reaching, and crawling to inspect, modify, and treat structures. Applicants must be willing to work indoors and outdoors in all weather conditions and must be on call 24/7 when required. May be required to obtain current TWIC card and must be able to work on ships or vessels while in the water when required. Candidates must be able to take direction and follow through with instructions. Organization skills as well as good communication, interpersonal, and computer skills desired. Valid Driver's License is required. Additional Requirements Employment is contingent upon successful completion of a background check and drug screen. Please check our website: https// for a detailed company profile. I understand that any hiring decision is contingent upon my successful completion of all of the Company's lawful pre-employment/post-offer checks, which may include a background check. If I am made a conditional offer of employment, I agree to execute any consent forms necessary for the Company to conduct its lawful pre-employment/post-offer checks. Such checks will not be conducted until allowed under applicable federal, state, and local law. I understand if I have a criminal background, it will not automatically disqualify me from employment unless otherwise required by law. I agree to execute any consent forms necessary for the Company to conduct its lawful pre-employment checks. I also understand that the Company is a drug and alcohol-free workplace and has a drug and alcohol testing program consistent with applicable federal, state, and local law. I understand that after a conditional offer of employment, I must submit to and pass a pre-employment drug test as a condition of employment. I understand that the Company recommends that I do not resign from my current job until satisfactory post-offer, pre-employment background checks, and a drug screen are received and processed.

Key Responsibilities Design, implement, and maintain automated and manual test scripts to validate software functionality Collaborate with Product Owners and development teams to define user stories and create testing strategies Create and manage detailed test plans and execute quality testing a

Job Description POSITION SUMMARY: Perform diversified duties with emphasis in Preventive Maintenance, electrical, mechanical, plumbing, painting, and other duties relating to general maintenance. Assists in the performance of duties necessary to keep the physical structure and associated equipment of the hospital in good repair. SHIFT DETAILS: • Consistently supports the hospital's Spirit of Serving Standards, in line with the Mission, Vision and values of St. Joseph Medical Center., • Follows the St. Joseph Medical Center Guidelines related to the Health Insurance Portability and Accountability Act (HIPAA), designed to prevent or detect unauthorized disclosure of Protected Health Information (PHI)., • Promotes a culture of safety for patients and Associates through proper identification, proper reporting, documentation and prevention of medical errors in a non-punitive environment., • Perform preventive maintenance throughout the Hospital to insure proper operation of heat, air conditioning, ventilation and medical support equipment (e.g., vacuum pumps, air compressors)., • Performs all assigned tasks in a professional manner to reflect the highest integrity of the Engineering Department., • Assists in maintaining and repairing HVAC controls and associated equipment to maximize efficiency levels in all environmentally controlled areas., • Performs urgent corrective, routine and requisitioned repairs of electrical, mechanical and plumbing systems as required., • Performs maintenance on equipment and systems as required., • As required, assists in maintaining electrical wiring and emergency generator systems. Inspects and tests equipment/systems., • Performs preventive maintenance duties to all physical structures of hospital and complies with all building safety codes. This is to include facility equipment and associated controls., • Assists in replacing, installing, repairing and testing electrical circuits, equipment, appliances and lighting systems as required., • Maintains routine records of all inspections, preventive maintenance and repairs performed on any equipment or system., • Performs manual duties as requested: i.e. moving supplies or furniture, replacing light bulbs, removing trash or scrap material., • Reads blueprints, interprets instructions and prepares specifications., • Ability to work well on his/her own and to inspect facilities and equipment., • A working knowledge of fire alarm and signal systems., • A through knowledge of how to use and maintain plant tools and equipment., • Knowledge and observance of safety precautions., • Participates in performance improvement and information management activities., • Any other duties as assigned by the Supervisor or Director of Engineering., • Supportive of the compliance program set forth by SJMC and demonstrated by:, • Upholds the Code of Ethics and Corporate Compliance., • Adheres to and helps to enforce all compliance policies relevant to his/her area., • Assures timely compliance education as requested by the Compliance Officer and/or through corporate initiatives., • High School Graduate or GED Equivalent, required., • Technical, clerical, critical thinking, and interpersonal skills., • Other certification requirements as defined by the certification policy., • Able to communicate effectively in English, both verbally and in writing., • Analytical skills are necessary to make calculations for the installation and repair of equipment., • The ability to concentrate and pay close attention to detail for up to fifty percent of work time when observing equipment disassembling devices, making repairs, and maintaining logs., • Bilingual or Multilingual., • Previous experience in a hospital setting., • Approximately three years, progressively more responsible related work experience is necessary to gain knowledge of equipment repair and be able to troubleshoot and diagnose a wide variety of mechanical equipment and machinery problems. Houston's oldest hospital is GROWING! Welcome to St. Joseph Medical Center (SJMC), Houston's first and only downtown hospital delivering world-class care for the last 137 years and looking forward to the next century of exceptional care to Houstonians when they need us most. Whether it's for a scheduled surgery, the birth of a baby, an unexpected emergency, or an outpatient visit, we have staff available around the clock to provide you access to immediate, quality health care. SJMC has been providing health care services to Greater Houston residents for over 130 years, which should give you great comfort in knowing that we have a great tradition of caring for our community. We strive to meet our patients' expectations and encourage our patients to provide us with feedback on how we can help them have the best experience possible while they're in our care. Over the last years we have expanded our services to include the Advanced Wound Care Center, Comprehensive Cardiac and Vascular Services, the Women's Center, the St. Joseph Maternal Fetal Medicine Center, and a Weight Loss Surgery Program, just to name a few. As you work with our physicians, nurses, case managers, educators, and other staff, you will be guided through your health care journey, from diagnosis to treatment, with compassion every step of the way. Diversity, equity, inclusion, and belonging are at the foundation of the care St Joseph Medical Center provides to our community we are privileged to support in all of our employment practices. We do not discriminate on the grounds of race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or expression or any other non-job-related characteristic.

Key Responsibilities Design, develop, and execute manual and automated test cases for deposit-related applications Collaborate with product managers, developers, and business analysts to understand requirements Perform end-to-end testing across multiple platforms and ensure compliance with banki

Key Responsibilities: Conduct thorough testing of software for bugs and defects using manual and automated methods Develop and implement detailed test plans and procedures for comprehensive test coverage Identify, document, and report defects while monitoring their resolution Required Qualifica

Job DescriptionSalary: Apave America offers an employee-centric company culture, competitive pay, and opportunities to build a rewarding career full of growth & advancement. Position Overview: The Inspector will conduct visual examinations of pressure retaining equipment such as tanks, piping, and vessels ensuring their mechanical integrity by performing visual inspections according to established API standards and codes (i.e. 510 for pressure vessels, 570 for piping, and 653 for storage tanks), to identify potential issues, maintaining documented reports of inspection findings, recommend necessary repairs, and certifying compliance with industry regulations. The Inspector provides site QA/QC guidance and monitors the work activity of employees onsite for compliance with specific policies and procedures. Requirements for an Inspector: Required Skills and Experience: • Must be at least eighteen (18) years of age, • API Certifications (510/570/653) and/or AWS CWI Certification, • Current SPRAT and/or IRATA Rope Access certification will be considered an asset, • Refinery experience is considered a plus, • Valid Drivers License and pre-access drug and alcohol testing required, • Pre-employment background checks will be required Work Conditions: • Field duties require indoor and outdoor work in diverse industrial environments with varying climate conditions, • Interaction with other crew employees, as well as supervisors, client personnel and a wide range of stakeholders, • Working in a plant and/or shop area around production machinery with extreme noise levels, • Work from various levels of heights and/or confined spaces for long periods of time, • Wear safety equipment as required by the safety department for personal protection (PPE) Physical and Mental Requirements: • Ability to lift, move, and carry objects weighing 75lbs. or greater, • Must be able to walk, sit, stand, bend, reach, and climb, • Must be able to work in confined spaces and at heights, including climbing tanks, ladders, scaffolding, towers, piping systems, catwalks, structural steel, and wind turbines, • Perform physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking and stooping, • Working extended hours and standing for extended periods of time, • Work in indoor and outdoor environments in conditions of extreme heat and/or cold, • Work in and near industrial hazards, • Must be able to walk and climb except when performing non-field duties, • Remain consistently active throughout shift, • Sufficient clarity of speech and hearing and other communication capabilities, with or without reasonable accommodation, which permits the employee to communicate effectively, • Sufficient vision (close vision and distance vision) or other powers of observation, with or without reasonable accommodation, which permits the employee to investigate, • Sufficient manual dexterity, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties, • Sufficient personal mobility and physical reflexes, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties and travel to off-site locations, • Must be able to wear safety equipment as required by the safety department for personal protection (PPE), • Ability to maintain focus and multitask effectively, • Exhibit sensible and responsible behavior, • Ability to work autonomously or within a team environment Per-Diem/Travel: To be considered for per-diem and travel pay, you must provide proof of residence documentation as requested by the client. The name and address on these documents must match. Per-diem and travel pay are subject to additional requirements, which will be listed in the offer letter at the time of hire, along with the site location. NOTE: To be considered, applicants must be able to provide documentation of current or previous certifications. * Apave America Inc. is an equal opportunity employer that prohibits discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, and other protected characteristics. * We make hiring decisions based solely on qualifications, merit, and business needs. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees.

Job Description RANDALL REED’S PLANET FORD – HUMBLE, TX MOBILE TECHNICIAN ATTENTION AUTO MOTIVE MOBILE TECHS, ready to shift your career into overdrive? EARN TOP PAY, SIGN ON BONUS AND MORE! Randall Reed’s Planet Ford is expanding their mobile repair and maintenance service and has an immediate opening for Experience Mobile Auto Mechanics to provide customers with remote automotive repair and maintenance services. Join a dynamic, groundbreaking team who is changing the way the auto maintenance business operates! Job Responsibilities Perform automotive repairs and maintenance within regular scope of work (excludes items such as steering rack, fuel tank, engine teardown). Diagnose and assess any circumstance and situation, depending on scope of work, either perform repair on site or coordinate for the repairs to be performed at Randall Reed’s Planet Ford. Provide labor and time estimates for additional automotive repairs. Be part of a team that cares about customers and their cars, working together to solve technical problems quickly and effectively. Perform other duties as requested by manager, and adhere to all company policies, procedures, safety standards and codes of conduct. Job Requirements • Minimum 2 years professional automotive repair experience, • Must be able to manage in a fast-paced work environment with limited supervision, • Have effective communication and interpersonal skills with the ability to read/comprehend written instructions, • Familiarity with all aspects of automotive repair/maintenance, • Positive, friendly attitude, along with a high customer service mentality, • Must have a valid driver license and be able to operate manual transmissions, • All applicants must be able to pass pre-employment testing to include background checks, drug test, credit report, and valid driver license., • Sign-On Bonus, • Keep your current tenure, • Aggressive, competitive weekly pay and bonuses, • Flexible hours, • 401k plans with company match, • Health care – medical, dental and vision insurance plans, • Life Insurance, short-term and long-term disability plans, • Paid holidays, • Vacation, • Employee discount program, • Opportunities to join our community service initiatives Why Randall Reed’s Planet Ford, Humble ? We offer the advantages that only an award winning, volume selling automotive organization can. We are part of one of the largest Texas’ independent, Top 100 automotive groups in the United States. World Class Automotive operates numerous dealerships across Texas - which means there are plenty of opportunities for career growth and development. Our competitive pay and benefits, training opportunities, and recognition programs make us an industry leader. To find out more, visit us at Randall Reed’s Planet Ford is an Equal Opportunity Employer. All employment decisions are based on business needs, job requirements and individual qualifications, without regard to race, color, sex (including gender identity, sexual orientation, and pregnancy), national origin, age, disability or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate.

Job DescriptionCompany Description What We Live By…… The McWane Way is a core philosophy outlined by the founder J.R. McWane in 1920. Today It encompasses Teamwork, Excellence, Leadership, Environment, Communication, Accountability, Safety and Trust. All team members at every level are expected to know and work by these principles, values, and behaviors. Most importantly, every team member is expected to be able to answer this question, “What does this mean for me?” This is the all-important question because behavior is the best evidence of a living principle. Join the McWane team on the journey to The McWane Way. Who We Are…… McWane Inc. has a newly created division, McWane Plant and Industrial (MPI). This new division, based in Birmingham, AL, combines all Plant and Industrial Products in a single customer-focused package. We offer comprehensive solutions through an experienced team of professionals specifically focused on these two special markets. Our Mission is to be the Plant and Industrial supplier who is “easiest to do business with”. We will make it easier to engineer, specify, and order components for plants. We will provide greater support for smoother delivery, cost-effective installation, and start-up. Most importantly, we will build strong relationships with design engineers, contractors, plant operations teams and project owners to assure we are their first-choice supplier for both new construction and future upgrades. At MPI, you will be part of a fast-paced, collaborative, start-up where you can see, firsthand, how your work translates into positive results. Job Description Position: Machine Operator I Reports to: Branch Manager Hourly Pay: $23.00 - $25.19 24-month wage progression plus shift differential Description McWane Plant and Industrial (MPI) is seeking an experience Machine Operator to join our Job Shop Fabrication and Machining operation. The Machine Operator is responsible for measuring, threading adjusting flange fit, and facing the flange on piece of ductile or steel pipe. Position will be required to use all types of manual machine tools such as lathes and threaders. Work also includes operation of the machines and crane to move pipe in and out of machining centers. Qualifications • High school diploma or equivalent desired, • 1st Responsibility - Ensuring personal safety and the safety of your team members., • Assists supervisors and managers in maintaining a safe and healthy work environment., • Wears appropriate PPE which may include fall protection, respiratory protection, hearing protection, foot, hand, head and eye protection., • Responsible for cleanliness of the assigned work area as well as maintaining a safe and clean work environment., • Proactively promotes the McWane Way principles., • Follow all processes and procedures associated with the Clear Water Safety Management Program. Advise management of any deviations from this program., • Identify fabrication requirements for each piece of pipe, • Place pipe in machine, center the pipe, and tighten for work. After the pipe is in place, the operator will machine tapered threads into the pipe. During this process, the machine operator is responsible for verifying measurements, such as thread depth and correct taper., • After the threads are cut the operator tests the flange to make sure it screws onto the pipe properly., • Applies glue on pipe and flange and uses the machine to tighten the flange onto the pipe., • For Threaders - Remove pipe from machine and move to next processing operation., • For Lathes – run the cutting tool across the surface of the face of the flange to flush fit the flange onto the pipe, • Operator I will work with pipe and flanges primarily from 3” to 6” in diameter, and lengths from 4 inches to 18 feet long., • Operator will be proficient with quality and able to meet prescribed production output objectives for the work center., • Good with math, able to read a tape measure and micrometer, • Ability to understand machinery processes, • Consistent attendance, ability to get to work on time, every day, • Team player, willingness to work when needed, help and volunteer across a variety of different machines, • Positive, enthusiastic, and helpful, • Regular full-time attendance is an essential function of the job, • While performing the duties of this job, the employee is regularly required to stand, walk, and use hands to finger, handle or feel objects, tools or controls., • The employee is required to communicate both verbally and written in English., • Occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl., • Must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds., • Must be able to meet and adhere physical requirements as well as adhere to wearing the appropriate PPE (steel toed boots, safety glasses and hearing protection), • Must be able to work in dust and fumes., • Will be required to work overtime and extended hours depending on customer and company demands., • Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises., • Must have some knowledge of industrial tools, their uses, and maintenance., • Specific vision abilities required by this job include close vision, peripheral vision, depth perception and the ability to adjust focus and determine and distinguish color., • Must have the ability to operate a forklift and obtain certification. Additional Information Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. McWane is a Federal VEVRAA contractor and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices. McWane will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation, disability, veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA - gender identity or expression, and genetic information) or any other category protected by federal, state or local law. LIMITATIONS AND DISCLAIMER The above job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor in compliance with Federal and State Laws. Requirements are representative of minimum levels of knowledge, skills and/or abilities. To perform this job successfully, the employee must possess the abilities or aptitudes to perform each duty proficiently. McWane Plant & Industrial. is an EEO/AA employer M/F/D/V. It is the Company's policy to provide equal opportunity for all qualified persons and to prohibit discrimination on the basis of race, color, sex, national origin, religion, age, disability, marital status, sexual orientation, gender identity, citizenship status, or any other legally protected status. We maintain a drug-free workplace and reserve the right to perform substance abuse testing as needed. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. McWane is a Federal VEVRAA contractor, and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices. McWane will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation, disability, veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA- gender identity or expression, and genetic information) or any other category protected by federal, state or local law.

Job Description: Stick Welder Pay: $19.00 - $20.00 based on testingAttendance bonusRESPONSIBILITIES • Grind barge boat repair areas, internal compartments cargo tanks, and external surface areas in preparation for welding., • Weld barge boat repair areas, internal compartments cargo tanks, external surface areas, and specialty components areas with the required number of passes to achieve full penetration welds., • Operate welding grinding equipment, blowers, hoses, etc., to accomplish weld repair duties., • Must pass a welding test to obtain internal skill classification., • Mandatory drug testing prior to employment, and will be subject to random, unannounced drug and/or alcohol tests during employment., • Must be able to communicate and take directions from Foreman Supervisor., • Able to work without contact lenses., • Required to arrive to work on time and also work overtime hours as required., • Understand general policies and procedures as described in the quality environmental manuals., • Required to undergo a training program and participate in refresher training as needed., • Must have or be eligible for a TWIC card.EXPERIENCE QUALIFICATIONS, • Must be proficient in English and be able to communicate effectively with others; Bilingual English/Spanish preferred., • Ability to multitask, learn quickly, and meet deadlines as needed., • Ability to understand Company Quality Manual and procedures described and required., • Ability to manage time and tasks effectively and efficiently., • Medical Coverage, • Dental Coverage, • Vision Coverage, • Short Term Disability Benefits, • Term Life Benefits, • Note: The specific duties, skills and qualifications may vary depending on the companys requirements and the nature of the tasks performed at the site. Employees must be willing to make reasonable adjustments to their tasks depending on the requirements of the client. We are an equal opportunity employer. We do not discriminate based on race, color, creed, religion, national origin, ancestry, citizenship status, marital status, age, sex, sexual orientation, gender identity, disability, veteran status, or any other protected characteristic as established by law.

Job DescriptionDescription: Elevate Your Career with Mann Eye Institute – Join Us as an Ophthalmic Technician! About Mann Eye Institute: At Mann Eye Institute, we are dedicated to helping our patients "See Life Better" by utilizing the latest advancements in eye care technology. Our team of board-certified ophthalmologists and optometrists are leaders in the field, committed to delivering the highest standards of care. We are seeking a skilled Ophthalmic Technician who shares our passion for excellence and is eager to contribute to our mission. Your Role: As an Ophthalmic Technician at Mann Eye Institute, you will play a pivotal role in delivering exceptional patient care. Your responsibilities will include: • Conducting comprehensive patient history assessments, covering ocular, medical, surgical, social, and family aspects., • Measuring visual acuity for both near and distance vision, including pinhole testing., • Performing automated lensometry with precision., • Conducting preliminary eye examinations to identify normal findings., • Administering specialized tests such as Amsler, Stereo, and Color Vision Testing., • Performing Auto Refraction and basic manual refractometry., • Accurately conducting Applanation Tonometry., • Executing Fundus Photography with expertise., • Performing repeatable, precision-driven diagnostic testing., • Educating patients on eye care procedures and protocols., • Providing clear explanations of procedures such as Lasik and Cataract surgery., • Demonstrating basic scribing competency., • Identifying and discussing abnormal findings with the physician during Preliminary Exams., • Performing manual lensometry to determine power sphere, cylinder, axis, bifocal, trifocal, and progressive lenses., • Conducting intermediate refractometry with attention to detail., • Recognizing abnormalities during diagnostic testing and communicating them effectively., • Demonstrates effective written and oral communication skills, • Must have the ability to work efficiently, • Strong customer service focus and interpersonal skills, • Detail oriented, • Legible handwriting, • Strong customer service Education and Experience: • High school degree or equivalent, • Medical management computer software and windows based operating system knowledge

Job Description POSITION DETAILS • Drivers with Closed SAP Violations: Pays $1,500.00 - $1,800.00 per week, • Drivers currently completing Follow-Up Testing: Pays $1,100.00 - $1,300.00, • Home every other weekend, • 53' Dry Van, • Dedicated Contract Freight, • No Touch - Drop & Hook & Live Unload, • 2019-2020 Automatic & Manual Internationals, • Running OTR Drivers cover the South, Southeast, and Midwest, • No West Coast – No Metro NY but will go upstate periodically, • Company pays for travel to orientation in Memphis, TN, • Great Benefits, • Pays Every Friday Via Direct Deposit REQUIREMENTS • Must be at least 23 Years of Age, • Must have a Minimum of 2 Years Class A Driving Experience, • Must Live East of Colorado (The Rockies), • DriveLine can do your Return to Duty Testing if needed, • Must be ok with .45 CPM until all follow-up tests are being completed BENEFITS • Health, • Dental, • Vision, • Paid Time Off

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and skilled Wiring Technician. The Wiring Technician will follow engineering drawings to install components onto relay panels, run and terminate wires according to Panelmatic Inc. standards. Requirements Job Duties: • Layout, measure, drill, and tap subpanels for initial assembly preparation, • Install din rail, equipment, SEL relays, Lock Out Relays, test switches, terminal blocks, nameplates, and wire duct, • Cut, tag, and run wire in specification to project drawings, • Alter and cut steel, plastic, or other various types of materials, • Ensure project quality within the specification, • Perform additional duties as needed to ensure the project schedule and timeline are met Minimum Qualifications: • High school diploma or equivalent required, • High levels of organizational and time management skills required, • High levels of analytical, observational, and active listening skills required, • High levels of reliability required, • Excellent communication skills both written and verbal required, • Ability to pass physical, drug, driving, and background check required, • Ability to physically push, pull, and lift 50lbs or more required, • Ability to stoop and bend required, • Ability to sit, stand, and walk for four plus hours at a time required, • Excellent manual dexterity required, • Excellent color vision and eyesight required, • Alignment with company core values required Preferred Qualifications: • Two or more years of experience as a wiring technician preferred Benefits: • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401K Retirement, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description Stage 3 specializes in high quality solids control equipment designed for mud systems to effectively manage solids, reducing costs for the customer and providing limited or zero discharge solutions as necessary. But we don’t stop there. Additionally, Stage 3 uses a team of Solids Control Field Technicians, field supervisors, engineers and scientists to make intelligent and informed recommendations on how to best manage your job for efficiency and cost savings. While our business has expanded, our mission remains to provide superior service and performance through: • Emphasis on Safety, • Teamwork, • Technology innovation You’ll work a steady 8:00 a.m. – 5:00 p.m., Monday through Friday schedule, with occasional overtime when projects demand your skills most. You’ll report directly to our Electrical, Automation & Controls Manager—a great chance to learn from an expert and grow in a supportive, hands-on environment where every connection you make matters. Essential Functions: • Assemble and wire basic electrical panels under supervision, following schematics and work instructions., • Mount components, label wiring, and perform panel layout work with accuracy and attention to detail., • Drill, tap, and cut holes in metal enclosures using proper tools and techniques., • Safely operate a variety of hand and power tools, including drills, screwdrivers, wrenches, soldering guns, and crimpers., • Perform point-to-point testing of circuits according to schematics under supervision., • Conduct basic QA/QC inspections prior to “Green-Tag” approval and accurately document test results., • Assist with facility-related projects such as moving materials, packing, cleaning, and trash removal., • Support other shop team members with equipment installation, service, and general maintenance tasks., • Install and verify all required S3S decals before equipment shipment., • Request tools, supplies, and fixtures as needed to complete assigned work efficiently., • Maintain a clean, organized, and safe work area at all times. Required Knowledge, Skills, and Abilities: • Fundamental understanding of AC and DC electrical systems and voltages., • Proficient in the use of Digital Multi-Meters (DMMs) and other basic electrical testing equipment., • Working knowledge of electrical control systems and their components., • Skilled in using precision measuring tools, including tape measures, calipers, and thread gauges., • Mechanically inclined with a strong aptitude for hands-on assembly work., • Ability to read, interpret, and follow both written and verbal instructions accurately and efficiently., • Ability to identify and select proper fasteners based on size and thread specifications., • Understanding of proper torquing techniques and safe installation practices., • Experienced with a wide range of hand and power tools used in panel assembly and wiring., • Clear and professional communicator, able to collaborate effectively within a team environment., • Excellent manual dexterity and capable of safely lifting up to 50 lbs with assistance if needed., • Fluent in English (Bilingual in Spanish, an asset). Minimum Required Education, Credentials, Licenses and Experience: • 18 years of age or older., • High School Diploma, or equivalent GED., • 1+ Year experience working in a warehouse environment (Preferred)., • Forklift Certified (Preferred, Certification on-site available)., • Must be legally authorized to work in the United States. Requirements • Understanding of AC and DC electrical systems and voltages., • Assemble and wire basic electrical panels., • Mount components, label wiring, and perform panel layout., • Testing of circuits., • QA/QC inspections., • Solder, soldering, soldering gun., • Follow and understand schematics / drawings.

Job DescriptionDescription: About Piping Technology & Products (PT&P) PT&P is a trusted leader in the design and manufacturing of engineered products for piping systems, proudly serving industries like oil & gas, power, and chemicals since 1978. Headquartered in Houston, we’re known for innovation, quality, and customer commitment. Join our team and help deliver solutions that keep critical infrastructure running safely and efficiently. Position Summary The Apprentice Electrician supports the installation, repair, and maintenance of electrical systems under the direct supervision of a licensed or Master electrician. This role is designed for individuals developing their electrical skills and knowledge, with structured on-the-job training to advance toward full competency. Work is performed in a manufacturing environment with exposure to machinery, tools, and varying conditions. Responsibilities • Assist in installing, maintaining, and repairing electrical wiring, equipment, and fixtures in accordance with local and national electrical codes., • Support testing of electrical systems and continuity of circuits using testing devices., • Help troubleshoot basic electrical issues and perform corrective actions under supervision., • Measure, cut, and bend conduit using manual or power equipment., • Pull electrical wire and route cables through conduit systems and cable trays., • Assist with motor controls, lighting systems, power distribution, switches, transformers, and panels., • Maintain clean and safe work areas; follow all safety procedures and wear required PPE., • Prepare, organize, and transport materials, tools, and equipment for job tasks., • Perform basic documentation of work performed, materials used, and findings., • Shadow senior electricians to learn proper techniques, procedures, and best practices., • Participate in required training, apprenticeships, and certifications as applicable., • High school diploma or GED required, • Basic knowledge of electrical theory, safety, and tools., • Ability to read basic diagrams, blueprints, and schematics., • Strong mechanical aptitude and eagerness to learn., • Ability to follow instructions and work in a team environment., • Good communication and problem-solving skills., • Must be able to pass pre-employment screenings and background checks, • Strong attention to detail, safety awareness, and teamwork., • Must be able to stand for prolonged periods (8+ hours), • Must be able to lift, push, pull, or carry up to 50 lbs. independently, • Frequent bending, stooping, reaching, and manual handling of materials required, • Good hand-eye coordination and manual dexterity, • Ability to tolerate noise, heat, and dust in a manufacturing environment, • Visual acuity to read measuring tools, drawings, and detect quality defects Manufacturing floor with exposure to moving mechanical parts, sharp materials, and moderate to loud noise. May be exposed to hot or cold environments depending on season. Work schedule may include overtime, weekend shifts, or on-call schedules as needed

Job Description We are seeking motivated and skilled Journeyman Electricians to join our team. The ideal candidate must be capable and well-versed in installing, maintaining, and repairing electrical systems in commercial and residential environments. Duties: • Install, maintain, and repair electrical systems in accordance with national and local electrical codes., • Diagnose and troubleshoot electrical issues using various testing devices., • Read and interpret blueprints, electrical schematics, and code specifications., • Adhere to all quality and safety codes., • Comply with regulations to ensure a safe working environment., • Maintain accurate records of work performed, including time spent, materials used, and tasks completed., • Must have a valid TDLR Journeyman Electrical license., • Must be capable and well-versed in all aspects of commercial electrical construction., • Minimum of 5 years of experience as a journeyman electrician., • Knowledge of electrical codes, regulations, and safety guidelines., • Ability to read and interpret blueprints, diagrams, and technical drawings., • Strong problem-solving skills and attention to detail., • Physical stamina and strength to perform manual labor and lift heavy objects., • Reliable and punctual with a strong work ethic., • Reliable transportation.Benefits:, • Competitive salary based on experience., • Opportunities for professional growth and development., • Comprehensive benefits package, including health insurance and retirement plans., • Opportunities for professional development and continued education., • A supportive and collaborative work environment.

Job Description Polk Mechanical is looking for the best and brightest in the Houston market to join our high performing team. As a result of our unparalleled customer service and unique offerings our business is experiencing impressive growth and with growth comes great opportunity for those with the ambition to accomplish great things. A career at Polk is not just a job but an opportunity to join a family of people who care about each other and care about their customers. It’s no wonder our business and our team are growing. Welders use accepted trade methods and a variety of manual welding processes, for example, several different gas torch processes, various electric are processes including inert gas shielded ones, or a number of both kinds of processes, to weld all types of commonly used metals and alloys of various sizes, shapes, and thicknesses, including dissimilar metals such as copper to steel. Welders also assure complete penetration when required as well as complete fusion of base and filler metals. They control the metals and the welding techniques to prevent distortion or burning of the metals, and to meet weld dimension, tolerance, strength, and other requirements. The welds are made in all positions including flat, horizontal, vertical, and overhead. Key Responsibilities: • Process Mastery: Apply manual welding processes such as oxy-acetylene and electric arc welding (e.g., gas metal-arc, shielded metal-arc, and flux-cored arc welding) with a focus on carbon steel applications., • Material Specialization: Weld carbon steel components 20" and down of various sizes, shapes, and thicknesses, including pipe and structural elements, ensuring strong, defect-free joints., • Precision & Control: Control heat input and welding techniques to prevent warping or burn-through, ensuring welds meet exacting standards for dimension, tolerance, and mechanical strength., • Planning & Layout: Interpret blueprints, sketches, drawings, specifications, and work orders to plan and lay out welding tasks accurately., • Electrode Selection: 6010, 7018 Choose appropriate welding electrodes or filler rods based on carbon steel type, thickness, and welding position., • Complex Welds: Perform challenging welds in confined or hard-to-reach areas that require high precision and strength, including pressure-rated welds., • Quality Assurance: Ensure final welds are free from cracks, porosity, slag inclusions, or other defects. Welds may be subject to rigorous inspections such as radiographic, magnetic particle, dye penetrant, and hydrostatic testing., • Problem Solving: Collaborate with supervisors to resolve unusual welding challenges and ensure compliance with project specifications and safety standards.Benefits:, • Paid Vacation & Holidays, • Career Advancement & Training Opportunities, • Technician Tool Account, • Medical, Dental & Vision Insurance, • 401(k) Retirement Plan, • Life & Disability Insurance

Job DescriptionSalary: The NDT Assistant will assist NDT Technicians in performing non-destructive Testing of materials while training to become a Certified Level II Technician. Apave America offers an employee-centric company culture, competitive pay, full benefits, and opportunities to build a rewarding career full of growth & advancement. Position Overview: The NDT Assistant Technician, (or Non-Destructive Testing Assistant),will primarily assist a certified NDT Technician by setting up and operating testing equipment, preparing test areas, performing basic inspections, interpreting initial test results under supervision, maintaining documentation, and ensuring safety protocols are followed during non-destructive testing procedures on materials and structures, all while learning the fundamentals of various NDT methods like Ultrasonic Thickness Testing (UTT), Radiographic Testing (RT), Magnetic Particle Testing (MT), and Penetrant Testing (PT). Key Responsibilities of the NDT Assistant Technician: • Equipment Setup and Calibration: Set up and calibrate NDT equipment according to established procedures, under the supervision of a Certified Technician., • Test Area Preparation:Prepare test areas by cleaning, marking, and applying necessary materials to facilitate proper inspection., • Basic Inspections: Assist and/or perform basic NDT inspections under the direct supervision of a Certified Technician, following established procedures and standards., • Data Collection:Collect and record test data, including readings and visual observations., • Result Interpretation (Basic):Assist in interpreting initial test results, identifying potential defects, and flagging areas for further evaluation by a certified technician., • Documentation: Maintain detailed documentation of test procedures and findings; Prepare accurate and detailed reports of inspection results., • Safety Compliance: Become familiar with required codes and procedures to carry out testing methods; Adhere to all safety protocols and procedures associated with NDT testing., • Training and Development:Actively participate in training programs to gain knowledge of different NDT methods and procedures., • Technical Skills:Basic understanding of mechanical principles, materials science, and inspection techniques., • Attention to Detail:Ability to accurately identify and document small defects., • Physical Capabilities:Ability to work in various environments and positions, including confined spaces., • Communication Skills:Clear communication with the lead technician regarding findings and any issues encountered., • Basic Computer Skills:Proficiency in data entry and basic computer applications. Career Progression: With experience and further training, the NDT Assistant Technician will have the opportunity to progress into becoming a fully certified NDT Level II Technician, allowing them to perform inspections independently and interpret results with greater autonomy. Required Skills and Experience: • High School Diploma or equivalent is required, • Must be at least eighteen (18) years of age, • Valid Drivers License and pre-access drug and alcohol testing required, • Pre-employment background checks will be required, • 40hr Radiation Safety Training may be required for some sites/locations, • Radiographer state card will be considered an asset, • NDT training and experience will be considered an asset, • Technical experience preferred, • Current SPRAT and/or IRATA Rope Access certification will be considered an asset, • Valid TWIC Card and/or knowledge of PIN to TWIC Card may be required for some sites/location, • Ability and willingness to travel to multiple job sites may be required for some sites/locations, sometimes with little notice Work Conditions: • Field duties require indoor and/or outdoor work in diverse industrial environments with varying weather conditions, • Interaction with a wide range of stakeholders, • Working in a plant and/or shop areas around production machinery with extreme noise levels, • May be required to work from various levels of heights and/or in close, confined spaces for long periods of time, • Must be able to wear safety equipment as required by the safety department for personal protection (PPE) Physical and Mental Requirements: • Ability to lift, move, and carry objects weighing 75 pounds or more, • Must be able to walk, stand, bend, reach, and climb, • Must be able to work indoors and outdoors in all weather conditions, • Must be able to work in confined spaces and at heights, including climbing tanks, ladders, scaffolding, towers, piping systems, catwalks, structural steel, and wind turbines, • Must be able to stand for extended periods, lift heavy objects, and work in various environments including from heights and confined spaces, • Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits the employee to communicate effectively, • Sufficient vision or other powers of observation, with or without reasonable accommodation, which permit the employee to investigate, • Sufficient manual dexterity, with or without reasonable accommodation, which permits the employee to perform routine in-field or office job duties, • Sufficient personal mobility and physical reflexes, with or without reasonable accommodation, which permit the employee to perform in-field or office job duties, • Ability to maintain focus and multitask effectively, • Exhibits sensible and responsible behavior Benefits: • Dental Insurance, • Vision Insurance, • Health Insurance, • Paid Time Off, • 401(K) W/Matching, • Flexible Spending Account, • Health Savings Account NOTE: To be considered, applicants must be able to provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification. * Apave America Inc. is an equal opportunity employer that prohibits discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, and other protected characteristics. * We make hiring decisions based solely on qualifications, merit, and business needs. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees.

Job DescriptionSalary: DOE The Quality Assurance (QA) Lead will serve as the driver in ensuring the highest standards of quality across all projects and initiatives, particularly those impacting the airline industry. This role involves developing and managing QA processes, leading testing efforts, and collaborating with various departments to ensure that all software applications, systems, and IT services meet specified requirements and quality benchmarks. Responsibilities: Leadership and Team Management: • Lead, mentor, and develop a team of QA engineers, analysts, and testers to deliver high-quality products., • Develop, implement, and refine QA strategies, processes, and methodologies to support the continuous improvement of solutions., • Oversee the creation of comprehensive test plans, test cases, and test scripts to ensure all systems are thoroughly validated., • Define and track key performance indicators (KPIs) related to software quality and performance., • Work closely with development, operations, and business teams to ensure seamless coordination and alignment on QAobjectives., • Evaluate new testing tools, technologies, and processes to improve overall efficiency and effectiveness of the QA function. Education: • Bachelors degree in Computer Science, Information Technology, Engineering, or a related field., • Relevantcertifications (e.g., ISTQB, Six Sigma, Agile/Scrum certifications) are a plus. Experience: • Minimum of 5 years of experience in software testing/QA, with at least 2 years in a leadership or managerial role.Proven experience with manual and automated testing tools (e.g., Selenium, Postman, ReadyAPI, etc.)., • Testing within a technical development environments on complex business applications, • UI, Mobile App, and/or API Testing Experience, • Experience in airline information systems environment, • Bilingual (Spanish), • Experience with cloud computing (e.g., AWS, Microsoft Azure) and DevOps practices., • Expertise in database management and testing, with knowledge of relational databases (e.g., MySQL, SQL Server, Oracle) and experience with database testing., • Familiarity withETL processes and testing of data pipelines., • Proficiency with automated testing tools such as Postman, Selenium, JUnit, TestNG, and Appium., • Experience in performance testing using tools like LoadRunner or JMeter to ensure high availability and reliability in a 24/7 airline environment., • Understanding ofsecurity testing, particularly in highly regulated industries like aviation.

Job DescriptionThe Technology Trainer’s tasks will differ slightly project to project but the objective remains the same in providing subject matter expertise to the specified training program to ensure that employee learning outcomes are achieved. RESPONSIBILITIES: • Conducts new hire and follow-up training on the MS Office suite and the firm’s document management, timekeeping, and CRM systems via one-on-one coaching, virtual instruction, and classroom., • Retrains current personnel as new policies and procedures are developed., • Uses in-depth professional knowledge and insight to develop software training and materials from standard to highly customized implementations. Develops and maintains courseware outlines, demo documents, PowerPoints, and/or training manual material of firm supported software (existing and new). Tracks training schedules., • Develops procedures, specifications, and firm standards optimizing the use of existing and future firm related software., • Creates and maintains training events and on-demand resources. Teaches using a variety of methods designed to help employees develop their knowledge and skills in order to achieve performance objectives. Maintains training related equipment to ensure proper configuration and functionality., • Provides troubleshooting, best practices, and training support to the Help Desk, other IT personnel, and Word Processors to facilitate Help Desk support. Provides support from the Help Desk as needed., • Collaborates with management team to identify firm-wide and department training needs. Proposes suggestions for training topics based on analysis of tickets, user group feedback, and one-on-one user conversations., • Analyzes and tests new software applications as needed or requested., • Acts as a liaison between software vendor sales and technical support staff regarding application issues., • J.D. is required, plus three or more years of relevant experience in a professional services environment, along with knowledge of terminology and procedures applicable to specific practice areas of legal personnel (i.e., while working with attorneys in the Litigation Practice Group will need to be able to demonstrate an understanding of the litigation case lifecycle)., • Expert proficiency in word processing techniques, technology in an electronic network systems environment, MS Office Suite, and PDF software (ability to manipulate and edit PDFs using Acrobat, Nuance, etc.) is required., • Experience drafting training modules and testing., • Possesses high energy level and ability to engage employees., • Possesses strong communication, presentation, and interpersonal skills., • Demonstrates good organizational skills, attention to detail, the ability to manage multiple projects simultaneously, and provide superior internal client service in a team focused environment., • Must be reliable, a self-starter, and possess the ability to work independently and effectively under time constraints and pre-set deadlines in an accurate manner with consistent high production; requires minimal supervision; may work outside of normal business hours.

Job Description Job Description SUMMARY OF COMPANY Southwest Shipyard, LP provides gas freeing and cleaning services, steaming, and flaring services, Barge and Boat repair, Surface preparation and painting, water treatment and new construction services to the commercial and government marine industry. Southwest Shipyard owns and operates four (4) shipyards in South Texas with direct deep-water access to the Gulf of Mexico. We take pride in our dedicated and experienced workforce that focuses on Quality, Safety and Environmental Excellence. Our motto is “Faster, Safer, Better”. JOB SUMMARY This position is primarily responsible for using electrical currents to fuse metals like steel together to repair parts or build new components. (SMAW) PAY RANGE *Pay is determined by Internal Weld Test Classification Results - 3G/4G Weld Test **HR will contact qualified applicants to schedule on-site weld test. WORK SCHEDULE Regular attendance and punctuality are required of all employees. Varies by Department and/or Location. Day Shift: 6:00am - 3:30pm Night Shift: 3:30pm - 12:00am (Midnight) Overtime and/or Weekend Availability required. Channelview Location. (18310 Market St, Channelview TX, 77530) BENEFITS • Competitive Salary., • Comprehensive Benefits (medical, dental, vision, life)., • 401(k)/Retirement Savings., • Friendly Work Environment., • Paid-Time off/Holidays., • Career Path Opportunities RESPONSIBILITIES • Grind barge & boat repair areas, internal compartments & cargo tanks, and external surface areas in preparation for welding., • Weld barge & boat repair areas, internal compartments & cargo tanks, external surface areas, and specialty components & areas with the required number of passes to achieve full penetration welds., • Operate welding & grinding equipment, blowers, hoses, etc., to accomplish weld & repair duties., • Must pass a welding test to obtain internal skill classification., • Mandatory drug testing prior to employment, and will be subject to random, unannounced drug and/or alcohol tests during employment., • Must be able to communicate and take directions from Foreman & Supervisor., • Able to work without contact lenses., • Required to arrive to work on time and also work overtime hours as required., • Understand general policies and procedures as described in the quality & environmental manuals., • Required to undergo a training program and participate in refresher training as needed., • Must have or be eligible for a TWIC card. EXPERIENCE & QUALIFICATIONS • Must be proficient in English and be able to communicate effectively with others; Bilingual English/Spanish preferred., • Ability to multitask, learn quickly, and meet deadlines as needed., • Ability to understand Company Quality Manual and procedures described and required., • Ability to manage time and tasks effectively and efficiently., • High School Diploma or GED equivalent preferred. PHYSICAL / MENTAL REQUIREMENTS The employee must be able to perform the essential functions of the job with or without reasonable workplace accommodation. The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes hard hat, safety glasses, life vest, respirators, ear plugs, steel toed shoes, personal flotation devices (PFD’s), or other protective equipment as required by the work performed and location the work is being done. In addition, Employees in this position must also be capable of: • Walking, stepping, climbing, or otherwise moving from one location on the job site to another, which may be of varying heights and access parameters., • Standing, stooping, bending, crouching, kneeling, squatting, climbing, crawling, or sitting for long periods of time., • Repetitive movements by feet, shoulders, arms, wrists, hands and back in performance of work., • Climbing stairs, and/or vertical ladders of varying heights., • Working in confined work areas and/or elevated heights., • Lifting objects of minimum of 10lbs, with maximum single-person lift limit of 50lbs, with frequent lifting and carrying., • Adapting to temperature changes, outdoor conditions, and prolonged exposure to dusty, wet, or humid conditions, loud noises, and vibration., • Visually inspecting equipment and verifying information, often in small print., • Applying sideways/upward/downward pressure to tighten and loosen hardware. The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Employment at Southwest Shipyard, LP is on an “at-will” basis. There is no contract of employment between Southwest Shipyard, L.P., and anyone or all its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Only the Owner or President has the authority to modify the at-will relationship, and then only in writing specifically addressed to the employee on this issue and signed by Southwest Shipyard, L.P. Executive. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. EEO Statement Southwest Shipyard, LP is an equal opportunity employer, and all qualified candidates will receive consideration without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or any other characteristic protected by law. Southwest Shipyard, LP participates in the E-Verify Employment Verification Program. Southwest Shipyard, LP is not currently accepting unsolicited resumes from search firms. Regardless of past practice, all resumes submitted by search firms to any employee at Southwest Shipyard, LP, via-email, the Internet or directly to hiring managers at Southwest Shipyard, LP in any form without a valid written agreement in place for that specific position will be deemed the sole property of Southwest Shipyard, LP. As a result, no fee will be paid in the event the candidate is hired by Southwest Shipyard, LP Company DescriptionSouthwest Shipyard, LP provides gas freeing and cleaning services, steaming, and flaring services, Barge and boat repair, Surface preparation and painting, water treatment and new construction services to the commercial and government marine industry. Southwest Shipyard owns and operates four (4) shipyards in South Texas with direct deep-water access to the Gulf of Mexico. We take pride in our dedicated and experienced workforce that focuses on Quality, Safety and Environmental Excellence. Our motto is “Faster, Safer, Better”.Southwest Shipyard, LP provides gas freeing and cleaning services, steaming, and flaring services, Barge and boat repair, Surface preparation and painting, water treatment and new construction services to the commercial and government marine industry. Southwest Shipyard owns and operates four (4) shipyards in South Texas with direct deep-water access to the Gulf of Mexico. We take pride in our dedicated and experienced workforce that focuses on Quality, Safety and Environmental Excellence. Our motto is “Faster, Safer, Better”.

Job Description Job Description: Maintenance Lead Apartment Lead Maintenance – Houston, TX • Full-time Job Summary Apply maintenance skills and customer service skills to ensure overall maintenance of the properties to ensure that all physical aspects of the properties meet all applicable laws as well as the company’s established standards. Troubleshoot and repair all aspects of the property and its units; plumbing, electrical, heating/cooling, carpentry, appliances, painting, drywall, etc. Work may be performed independently or as part of the maintenance team. This position operates within and contributes to an environment with Fair Housing laws and Equal Employment Opportunities. Reports to Property Manager. Responsibilities: • Troubleshoot work orders daily for residents, prioritizing the service requests and ensuring they are completed in a timely fashion., • Prepare vacant units for new residents, ensuring that the unit meets the company standards/checklist., • Ensure the exterior grounds of the property and pool maintenance are kept clean daily., • During weather freeze warnings or winter storms, ensure all preventative measures are taken., • Conduct a walk-through of the entire property to ensure everything is in working order; if not, take the appropriate steps for correction., • Prepare for inspections and schedule outside contractors for projects, when necessary., • Be available for quick response per company policy of on-call duties as required., • Attend staff meetings as required or requested., • Manage upkeep to ensure sweeping, mopping, and vacuuming floors in communal areas are done, and manage to dispose of trash found in communal areas., • Painting communal areas and exterior walls., • Tracking inventory to ensure that you have adequate maintenance supplies., • Ensuring that fire extinguishers, hydrants, alarms, and emergency exits always remain in excellent working condition., • Provide daily updates on progress and daily maintenance operations to Property Manager, • Must have own tools and HVAC Gauges, • Other responsibilities as assigned by Property Manager or as requested by the corporate team. Skills & Abilities • Administrative Skills – the ability to understand the Company’s policies and procedures, track materials used for inventory purposes, and sign-in/sign-out unit keys., • Analytical Skills – the ability to draw conclusions and examine alternatives when approaching a maintenance request, the ability to read blueprints if needed, the ability to consider alternative methods/materials if necessary are unavailable., • Communication/Language Skills – the ability to read and comprehend warning labels and service requests, the ability to effectively communicate with residents and other property staff., • Creative Skills – the ability to find the most efficient way to complete a task, continuously look for ways to retain residents, and improve the property within budget requirements., • Computer Skills – Outlook, Appfolio (we will train), Online ordering of maintenance supplies, etc., • Leadership Skills – Have a can-do attitude, the ability to show confidence in work, and train and motivate others., • Manual Skills – cleaning, groundskeeping, and removing snow when needed., • Appliance Repair – Troubleshooting and repair of parts, cleaning lint screen in washer/dryer, pumps, transmission, water heater troubleshooting repair, and replacement., • Carpentry – Proper use of hand and power tools, cabinetry, door hanging to include installing hardware, closers, hinges, drywall repair and replacement, window repair, door repair or replacement, and replacement of shelving installation., • Electrical – Able to replace outlets, switches, light fixtures, circuit breakers, photocells, ballasts, understand and use basic test equipment, and have knowledge of fire and security system operation., • HVAC – Filter changes, coil cleaning, pump replacement, ability to troubleshoot using schematics and wiring diagrams, maintaining a type II EPA certification, understanding of how to use pressure gauges, charge, evacuate, and change out condensing units, air handlers, etc., • Plumbing – Basic plumbing repair on copper, PVC, CPVC, toilets, pump replacement, replacement of fixtures, valves, water heater troubleshooting, repair, and replacement, and ability to use an electric auger or snake., • Pool Care (CPO) – Filter cleaning, pool cleaning, chemical testing, knowledge of all shut-off, first aid, signage, and pump motor repair and replacement., • Mathematical Skills – the ability to calculate square footage and read proper measurements. Working Conditions Includes walking, standing, sitting, crouching, crawling, and climbing are necessary throughout the day. May be exposed to various weather conditions when working on the exterior of the property. It may be necessary to lift weights up to 100 pounds. It is essential to be safety conscious as there is exposure to moving mechanical parts, fumes/airborne particles, and the risk of electrical shock. Driving Requirements: • Utilize personal transportation to pick up replacement parts and supplies., • Maintain a valid driver’s license, car registration, and proper automobile insurance if driving a vehicle for business purposes. Working Environment: Constantly outdoors/indoors, in all weather conditions, often for extended periods of time, and in weather conditions that may make the environment uncomfortable (hot in summer, cold in winter). Occasional exposure to paint fumes, solvent adhesives, etc. The employee must wear Personal Protective Equipment, rubber gloves, and eye protection when necessary. Occasional need to work in awkward, confining positions. Safety Responsibilities: Learn and ensure compliance with all company, local, state, and federal safety rules. Ensures that unsafe conditions are corrected in a timely manner. On-Call Rotation for after-hours emergencies will be shared among maintenance staff from sister properties or maintenance team members. Each property’s maintenance employee is on call for a full week; the frequency depends on how many properties are on the rotation schedule. Qualifications Education: High School Diploma/GED required Work Experience: 3+ years of prior maintenance experience required. Licenses/Certifications: HVAC certification, CPO, valid driver’s license with insurance required. Benefits: Insurance benefits are available on the 1st of the month following 2 months of continuous employment. Rental employee discount available. Vacation, Sick, and Holiday paid time off. Employment offers are contingent upon successful completion of a background check and drug screen. Join the Arbor Properties family and help us create exceptional living experiences for our residents while building a rewarding career in the multifamily industry

Job Description:\n\nDescription: Since 1980, CobbFendley has been committed to providing innovative engineering and surveying solutions with the goal of bettering communities. Our multi-discipline approach allows for the efficient completion of projects through experienced staff who focus on client communication. We are always seeking talented and qualified professionals to enhance our ability to provide clients with exceptional service. Are you ready to Join Our Block and advance your career? At CobbFendley, people are our most valued resource. We offer a(n): New Hire Program // We understand changing jobs can be intimidating, CobbFendley has established a program geared specifically to the successful onboarding and integration of new hires into the firmDevelopment Opportunities // Professional and personal growth through innovative in-house training and collaborative resources Compensation + Benefits // Competitive compensation package with comprehensive benefits including 401(k) Matching and Profit-sharing Contributions; Employee Stock Ownership Plan (ESOP); Health, Vision, and Dental Insurance; Short-Term and Long-Term Disability Insurance; Employer Funded and Voluntary Life Insurance; Tuition Reimbursement; and Continuing Education Programs Paid Parental Leave // FMLA-eligible employees will receive fully paid leave in the amounts of eight (8) weeks for maternity cases and two (2) weeks for paternity or adoptions casesWinter Holiday // Extended office closure from December 25 through January 1 to relax and enjoy the holidays Community Engagement // CobbFendley Cares focuses on STEM Education, Hunger Relief, and Sustainable SolutionsRequirements: CobbFendley is seeking a skilled Deltek Application Administrator with hands-on experience in Deltek Vantagepoint and a deep familiarity with financial management, project/resource management, and business development modules. This role involves actively supporting and optimizing Deltek ERP solutions specifically tailored to the engineering industry. The ideal candidate is a proactive problem-solver who can assist end-users directly, ensure smooth system functionality, and apply best practices in ERP administration. This position offers an opportunity to play a crucial role in our ERP system’s daily success and to grow into a leadership position. RESPONSABILITIES Day-to-Day System Administration: Serve as the primary point of contact for all Deltek Vantagepoint administrative tasks, including setup, configuration, and user management.Manage user roles, access permissions, and system configurations to align with project and financial management needs.Perform daily system monitoring, troubleshoot errors, and coordinate with Deltek support for resolution as needed.Conduct periodic system audits and provide recommendations for system optimization.End-User Support & Training: Provide hands-on support for end-users, answering questions and resolving technical issues across financial management and project/resource management modules.Conduct training sessions and create instructional materials to help users effectively leverage Deltek’s functionalities.Proactively gather feedback from users to identify common issues or potential improvements to workflows.Financial Management Module: Configure and maintain the Deltek financial management module to support accurate billing, invoicing, and reporting.Collaborate closely with finance and accounting teams to support month-end and year-end closing, reporting, and audit requests.Ensure the system captures financial data accurately and in compliance with organizational policies and construction industry standards.Project and Resource Management Module: Configure and support the project management and resource planning functions, enabling teams to track progress, budgets, and timelines efficiently.Work directly with Deltek Administrators to customize workflows, dashboards, and project templates.CRM Module:Configure and support the CRM functionsCollaborate closely with marketing team to implement process and development training programSystem Customization and Enhancement: Customize forms, fields, reports, and dashboards within Deltek to meet evolving project and financial tracking requirements.Implement automation workflows for frequently used processes to enhance efficiency and minimize manual input.Data Integrity and Reporting: Develop and generate custom reports, KPIs, and dashboards for end-users and management, providing visibility into project performance, financial metrics, and resource utilization.Assist teams in accessing and interpreting data from Deltek, ensuring they have reliable insights for decision-making.Documentation and Process Optimization: Maintain detailed documentation of system configurations, customization, and troubleshooting processes.Continuously review and refine system configurations to align with best practices and construction industry trends.Identify opportunities to streamline Deltek processes and workflows, making recommendations to improve ERP efficiency.Future Team Leadership (Growth Opportunity): As the organization expands, prepare to assume team leadership responsibilities by training and mentoring future Deltek support staff.Support the planning and development of a team dedicated to Deltek system support and enhancement. QUALIFICATIONSEducation: Bachelor’s degree in Information Technology, Business Administration, or related field (or equivalent work experience).Experience: Minimum of 3 years of hands-on experience as a Deltek Application Administrator or similar role supporting Deltek Vantagepoint.Proven expertise in configuring and supporting financial management and project/resource management modules.Technical Skills: Proficiency in Deltek Vantagepoint administration including configuring modules, customizing fields/reports, and managing user access.Familiarity with engineering project workflows including budgeting, resource allocation, and cost tracking.Basic knowledge of integrations between Deltek and other tools.Experience working with SQL or similar query languages is a plus.Soft Skills: Strong problem-solving abilities with attention to detail.Excellent communication skills for working with both technical and non-technical teams.Ability to take initiative and work independently with minimal supervision. Preferred QualificationsCertifications in Deltek Vantagepoint or similar ERP platforms.Prior experience in a engineering-focused organization or similar project-based industry. COBBFENDLEY CHARACTERISTICSWe Collaborate // with a professional attitude making communication a priority.We Commit // to maintaining a safe and inclusive work environment, with a focus on accountability. We Build Communities // by fulfilling our responsibilities with integrity that is consistent with industry standards. PHYSICAL/COGNITIVE REQUIREMENTS + ENVIRONMENTAL FACTORS Most work is performed professional office environment.Seated and Standing Position. Extended periods of sitting and standing in an upright position at a workstation.Mobility. Movement within the office including navigating between floors and workstations.Neck Movement. Forward flexion, extension, or lateral rotation of the head and neck while using multiple computer screens.Repetitive Motion. Repetitive finger movements for operating a computer mouse and typing on a keyboard.Arm Movement. Extending hands and arms in various directions, such as overhead, below the waist, forward, or laterally.Object Handling. Raising or lowering objects from one level to another and transporting objects by holding them in the hands, arms, or over the shoulder.Cognitive Requirements. Selective attention, oral comprehension, oral expression, speech recognition, speech clarity, written comprehension, written expression, problem sensitivity, deductive reasoning, inductive reasoning, number facility, information ordering, category flexibility, flexibility of closure, fluency of ideas, and originality.Office Conditions. Includes extensive use of electronic devices such as computers, printers, copiers, scanners, plotters, and telephones. Additionally, tasks may involve the use of cutting tools and equipment like rotary paper cutters and plotting devices. EXPECTED WORK HOURSThis is a full-time position, generally 40 hours per week, however, hours may fluctuate depending on department needs including the use of overtime. CobbFendley’s standard operating hours are Monday through Friday, 7:30 AM to 4:30 PM CST. Generally, employees receive a 1-hour unpaid lunch break free of duty. Please note, operating hours and lunch hours may differ based on project workload, primarily for field staff. WORK LOCATION FLEXIBILTY This position is eligible for a hybrid schedule once the training period is complete as established by the department. EQUAL EMPLOYMENT OPPORTUNITY Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws.EEO is the Law (English)EEO is the Law (Spanish)EEO is the Law - Poster Supplement MISCELLANEOUS Pre-Employment Screenings. All offers of employment at CobbFendley are contingent upon the prospective employee passing a drug screening, physical exam (if applicable), and various background verifications (including but not limited to 10-year history of the county, state, federal, and a 5-year history of motor vehicle records). CobbFendley complies with all applicable state and federal laws regarding said screenings. Unless and only to the extent state or federal law limits CobbFendley’s drug-testing requirements for initial hiring, all candidates for employment are subject to pre-employment drug screening verification which may include a panel drug test for use of marijuana and other substances that may be lawful under state law but unlawful under federal law. A positive result may lead to disqualification of candidacy or termination from employment to the extent permitted by law. CobbFendley reserves all rights with respect to its drug-testing, other pre-employment screenings, and workplace policies and procedures. External Recruiting Agencies. CobbFendley does not and will not accept unsolicited resumes under any circumstances from independent recruiters, recruiting agencies, or similar entities. Recruiting activity on behalf of a candidate does NOT constitute CobbFendley's acceptance of terms and conditions without prior contractual agreements signed by authorized CobbFendley personnel. Unsolicited resumes through any channels including cold calling, emails, applications, social media messaging, etc., will not be reviewed.Work Authorization + Sponsorship. Cobb, Fendley & Associates, Inc. participates in E-Verify. E-Verify is an Internet-based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA). The E-Verify system uses federal databases to rapidly validate individual identities and work eligibility from the information gathered in the Form I-9. CobbFendley will not sponsor applications of work visas. We understand that this could affect your decision to apply with these conditions in mind.Applicant Accommodations. Consistent with the Americans with Disabilities Act (ADA) it is the policy of CobbFendley to provide reasonable accommodation when requested by a qualified applicant or candidate with a disability, unless such accommodation would cause an undue hardship for the Company. The policy regarding requests for reasonable accommodation applies to all aspects of the hiring process. If reasonable accommodation is needed, please contact the HR Department at 713.462.3242 or . Drug-Free Workplace Conditions Medication Disclosure: Employees and job applicants shall receive notice of the most common medications, either by brand name, common name, or chemical name, that may alter or affect a drug test. A list of such medications shall be developed by the Agency for Health Care Administration. Contesting Positive Results: An employee or job applicant who receives a positive confirmed drug test result may contest or explain the result to the employer within 14 days after written notification of the positive test result. Responsibility to Notify the Laboratory: The employee or job applicant has the responsibility to notify the testing laboratory of any administrative or civil actions brought pursuant to this section. List of Drugs for Testing: A list of all drugs for which the employer will test can be supplied upon request, described by brand names or common names, as applicable, as well as by chemical names. Right to Consult the Testing Laboratory: Employees and job applicants are notified of their right to consult the testing laboratory for technical information regarding prescription and nonprescription medication.

Job Description Job Title: Data Center Cable Installer Job Overview: We are seeking a Data Center Cable Installer to join our team supporting live Data Center projects across the USA. The role involves the installation of fiber optics and copper cables on predetermined routes within data centers, requiring manual handling, attention to detail, and professionalism. You will work closely with a team and under the supervision of a team leader to ensure all installations are completed to the highest standard.Key Responsibilities: • Unbox and unpack cables., • Scan cable barcodes using the provided client scanner., • Label cables following the cable schedule., • Pull and route cables according to designated paths., • Professionally dress cables using velcro wraparound ties., • Patch cables into the correct ports on switches., • Test copper and fiber optic cables using equipment such as the Fluke tester., • Terminate copper cables and splice fiber optic cables., • Follow safety guidelines and use the provided Personal Protective Equipment (PPE) as necessary., • Operate mobile working platforms (electric and non-electric) for tasks at low heights above the ground.Requirements:, • Experience in the installation and termination of copper and fiber optic cables., • Familiarity with cable testing equipment such as the Fluke tester., • Ability to handle cables and equipment manually, including unboxing, scanning, labeling, and routing., • Capable of working on mobile platforms at low heights., • Basic knowledge of data center operations and cabling infrastructure is preferred., • Strong attention to detail and commitment to high-quality work., • Ability to work efficiently in a team and follow supervision.Work Schedule:, • Monday to Friday, 8:00 AM - 5:00 PM, • Personal Protective Equipment (PPE) provided., • Training on mobile working platforms and safety procedures. By applying to this job, as part of our typical recruiting process, from time to time, we may contact you regarding positions that we feel are a good fit for you or engage with you during the recruiting process via SMS text message. Message and data rates may apply, depending on your mobile phone service plan. At any time you can get more help by replying HELP to these texts, or you can opt-out completely by replying STOP. Our Terms of Service are available at . Powered by JazzHR VjltEKeis5

Job DescriptionDescription: Since 1980, CobbFendley has been committed to providing innovative engineering and surveying solutions with the goal of bettering communities. Our multi-discipline approach allows for the efficient completion of projects through experienced staff who focus on client communication. We are always seeking talented and qualified professionals to enhance our ability to provide clients with exceptional service. Are you ready to Join Our Block and advance your career? At CobbFendley, people are our most valued resource. We offer a(n): • New Hire Program // We understand changing jobs can be intimidating, CobbFendley has established a program geared specifically to the successful onboarding and integration of new hires into the firm, • Development Opportunities // Professional and personal growth through innovative in-house training and collaborative resources, • Compensation + Benefits // Competitive compensation package with comprehensive benefits including 401(k) Matching and Profit-sharing Contributions; Employee Stock Ownership Plan (ESOP); Health, Vision, and Dental Insurance; Short-Term and Long-Term Disability Insurance; Employer Funded and Voluntary Life Insurance; Tuition Reimbursement; and Continuing Education Programs, • Paid Parental Leave // FMLA-eligible employees will receive fully paid leave in the amounts of eight (8) weeks for maternity cases and two (2) weeks for paternity or adoptions cases, • Winter Holiday // Extended office closure from December 25 through January 1 to relax and enjoy the holidays, • Bachelor’s degree in a civil or related engineering discipline, required. Proficient // Solid understanding and substantial experience; works independently and efficiently. 4+ years of professional experience, PE may be required. • Knowledge of standard engineering and scientific techniques, procedures, and criteria in carrying out tasks. Familiarity with CobbFendley’s QA/QC Management System., • Skills including use of industry-standard computer software for the position (i.e., software such as CADD, HCS, AutoCAD, MicroStation, GIS, and Hydrologic/Hydraulic models). 1. Design + Analysis // • Complete entire design and analysis for a simple project, ensure latest manual and criteria are being met, sign and seal plans., • Work with project team to ensure tasks design and analysis tasks are coordinated. 2. Compliance + Quality // • Adhere to Company QA/QC processes and procedures and review work by others. Understand general contract language and risk assessments and mitigation. 3. Communication + Collaboration // • Work with supervisor, project manager, task leads, and various internal personnel to complete assignments within discipline and other disciplines., • Lead meetings and follow up documentation. 4. Training, Learning + Advancement // • Attend internal or external training., • Assist with onboarding and training various types of staff. 5. Client + Internal Satisfaction // • Work with clients daily, problem solve issues and escalate concerns when needed., • Set and adhere to project schedule, attend client meetings, assist with marketing and project interviews, general understanding of financial management to ensure profitability. 6. Technical // • Support Senior Project Managers with engineering design tasks and project management for various gas utility relocation projects to avoid interference with public improvements., • Represent CobbFendley at client meetings and performing client coordination., • Apply technical expertise and be able to work with a project team on a variety of applications ranging from feasibility studies to final as-built maintenance records., • Lead and coordinate with a team of EIT’s, Designers, and CAD Operators., • Assist in evaluation and solution of potential field problems., • Train to meet company safety standards., • Maintain a professional attitude and fulfill responsibilities with integrity., • Motivated to learn in a dynamic environment with short project deadlines., • Desire to collaborate with professionals and clients to increase your industry knowledge and grow in your career., • Commitment to perform responsibilities consistent with industry standards to achieve department and company goals., • Interest in developing relationships with clients, partners, and local organizations to remain a trusted resource in the community., • Perform independent research and adapt to changing priorities., • Work with minimal supervision and deliver accurate work product that is error free., • We Collaborate // with a professional attitude making communication a priority., • We Commit // to maintaining a safe and inclusive work environment, with a focus on accountability. Most work is performed in a professional office environment. Some trips to client offices and outdoor environments for observations will be required. • Seated and Standing Position. Extended periods of sitting and standing in an upright position at a workstation., • Mobility. Movement within the office and job sites, including navigating between floors, workstations, and outdoor environments with potential for uneven surfaces., • Neck Movement. Forward flexion, extension, or lateral rotation of the head and neck while using multiple computer screens., • Repetitive Motion. Repetitive finger movements for operating a computer mouse and typing on a keyboard., • Arm Movement. Extending hands and arms in various directions, such as overhead, below the waist, forward, or laterally., • Object Handling. Raising or lowering objects from one level to another and transporting objects by holding them in the hands, arms, or over the shoulder., • Cognitive Requirements. Selective attention, oral comprehension, oral expression, speech recognition, speech clarity, written comprehension, written expression, problem sensitivity, deductive reasoning, inductive reasoning, number facility, information ordering, category flexibility, flexibility of closure, fluency of ideas, and originality., • Office Conditions. Includes extensive use of electronic devices such as computers, printers, copiers, scanners, plotters, and telephones. Additionally, tasks may involve the use of cutting tools and equipment like rotary paper cutters and plotting devices., • Outdoor Conditions. Includes walking and climbing on uneven surfaces, confined spaces, and exposure to extreme weather conditions (heat and freezing temperatures). Potential exposure to high noise levels and various allergens, including poison ivy, sumac, dust, pollen, and cedar. Potential exposure to wildlife hazards such as animals, insects, and plants., • Safety and Equipment Use. Regular use of personal protective equipment (PPE) is required, along with use of hand and power tools., • This is a full-time position, generally 40 hours per week, however, hours may fluctuate depending on department needs including the use of overtime. Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. • EEO is the Law (English), • EEO is the Law (Spanish), • Pre-Employment Screenings. All offers of employment at CobbFendley are contingent upon the prospective employee passing a drug screening, physical exam (if applicable), and various background verifications (including but not limited to 10-year history of the county, state, federal, and a 5-year history of motor vehicle records). CobbFendley complies with all applicable state and federal laws regarding said screenings. Unless and only to the extent state or federal law limits CobbFendley’s drug-testing requirements for initial hiring, all candidates for employment are subject to pre-employment drug screening verification which may include a panel drug test for use of marijuana and other substances that may be lawful under state law but unlawful under federal law. A positive result may lead to disqualification of candidacy or termination from employment to the extent permitted by law. CobbFendley reserves all rights with respect to its drug-testing, other pre-employment screenings, and workplace policies and procedures., • External Recruiting Agencies. CobbFendley does not and will not accept unsolicited resumes under any circumstances from independent recruiters, recruiting agencies, or similar entities. Recruiting activity on behalf of a candidate does NOT constitute CobbFendley's acceptance of terms and conditions without prior contractual agreements signed by authorized CobbFendley personnel. Unsolicited resumes through any channels including cold calling, emails, applications, social media messaging, etc., will not be reviewed., • Work Authorization + Sponsorship. Cobb, Fendley & Associates, Inc. participates in E-Verify. E-Verify is an Internet-based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA). The E-Verify system uses federal databases to rapidly validate individual identities and work eligibility from the information gathered in the Form I-9. CobbFendley will not sponsor applications of work visas. We understand that this could affect your decision to apply with these conditions in mind. Medication Disclosure: Employees and job applicants shall receive notice of the most common medications, either by brand name, common name, or chemical name, that may alter or affect a drug test. A list of such medications shall be developed by the Agency for Health Care Administration. Contesting Positive Results: An employee or job applicant who receives a positive confirmed drug test result may contest or explain the result to the employer within 14 days after written notification of the positive test result. Responsibility to Notify the Laboratory: The employee or job applicant has the responsibility to notify the testing laboratory of any administrative or civil actions brought pursuant to this section. List of Drugs for Testing: A list of all drugs for which the employer will test can be supplied upon request, described by brand names or common names, as applicable, as well as by chemical names. Right to Consult the Testing Laboratory: Employees and job applicants are notified of their right to consult the testing laboratory for technical information regarding prescription and nonprescription medication.

Job DescriptionSalary: We offer competitive pay, comprehensive benefits, company matched 401k, and opportunities to build a rewarding career with Apave America Inc. Position Overview The Certified Welding Inspector (CWI)is responsible for ensuring the quality and safety of welded structures by visually inspecting welds, verifying compliance with codes and standards, and documenting findings, ultimately safeguarding structural integrity and preventing potential hazards. Key Responsibilities: Inspection and Verification: Conduct visual inspections of all welds and materials to ensure they meet customer and industry standards, specifications and/or AWS codes. Examine inspection records to determine inspection schedule and remedial actions conform with procedures and regulations. Evaluate the validity and acceptability of inspection, examination, and/or testing results. Witness and monitor work activities, inspections, and testing in accordance with approved quality plans, site surveillance plans, Inspection and Testing Plans (ITPs), procedures and processes. Inspect pipe-joining methods used by other personnel such as fusion and pipe welding. Examine containers, piping, tubing, and fittings for leaks and for adherence to government specifications for pressure level, design, construction and installation. Observe in-process welding and perform quality inspections on work currently performed or work that has been recently completed utilizing established checklists and/or other quality related documents. Measure dimensions, materials, products, installations or work for conformance to specifications. Ensure project permitting requirements are followed including pre- and post-project notifications. Technical Proficiency: Demonstrate comprehensive understanding of welding codes, procedures, specifications, and related technical documents. Strong background in welding inspection and a thorough understanding of welding processes and techniques. May utilize various NDT methods, such as ultrasonic, magnetic particle, and radiographic testing, to evaluate welds. Interpret blueprints, project plans, specifications, and other technical documents to verify compliance. Interpret blueprints, project plans, specifications, and other technical documents to verify compliance. Make responsible decisions in the field for the required scope of work to be accomplished and remove equipment, materials, installations, or the work that failed to meet specifications. Code and Standard Compliance: Verify welding operations adhere to relevant codes, standards, and specifications, such as those from the American Welding Society (AWS). Documentation and Reporting: Meticulously document inspection results, including identifying any defects or imperfections, and prepare reports for engineers, welders, and other stakeholders. Produce relevant field quality reports and provide quality metrics. Document and report inspection findings and job scope activities to meet standards, industry practices, and safety and environmental guidelines. Communication and Collaboration: Effectively communicate findings and recommendations to ensure that necessary corrective actions are taken. Discuss and explain procedures and regulations or need for corrective action with appropriate personnel. Recommend updates/revisions to policies and procedures based on field observations where procedures may not be followed because they are unclear, incorrect, or nonexistent. Training and Guidance: Recommend additional training, if deemed necessary, for field personnel based on findings of inspections. Provide guidance and training to welding team members on proper welding techniques and quality control procedures. Guide and assist technicians in the fabrication and installation of simple mechanical and related equipment and routine systems to ensure conformance of product and systems with engineering design and customer specifications. Procedure Development: Develop and review welding procedures to ensure they meet quality and safety requirements. Weld Qualification and Certification: Must be a Certified Welding Inspector (CWI) and possess certification from a recognized organization such as the American Welding Society (AWS). Responsible for verifying that welders are qualified to perform specific welding tasks. Write qualifications for each welder on-stie and the procedure qualifications for all welders. Certify all welders to the required AWS D1.1 standard or D15.1 if applicable. Quality and Safety Compliance: Play a crucial role in ensuring the safety of welding operations and the integrity of welded structures. Must have an eye for detail and the ability to identify defects in welds. Facilitate the timely and effective resolution of quality issues by serving as a liaison between stakeholders. Qualifications, Experience and Requirements: High School Diploma or equivalent is required Post-secondary education in welding technology or engineering will be considered an asset. Minimum of five (5) years of experience of welding-related experience is strongly preferred Certified Welding Inspector (CWI) certification is required SNT Level II certifications in MT/PT/UTT/RT considered an asset Additional API 510/570/653 and/or NACE certifications are considered an asset Valid Drivers License and pre-access drug and alcohol testing required Pre-employment background checks will be required • Valid TWIC Card and/or knowledge of PIN to TWIC Card may be required for some sites/location, • Ability and willingness to travel to multiple job sites may be required for some sites/locations, sometimes with little notice Work Conditions: • Field duties require indoor and outdoor work in diverse industrial environments with varying climate conditions, • Interaction with other crew employees, as well as supervisors, client personnel and a wide range of stakeholders, • Working in a plant and/or shop area around production machinery with extreme noise levels, • Work from various levels of heights and/or confined spaces for long periods of time, • Wear safety equipment as required by the safety department for personal protection (PPE) Physical and Mental Requirements: • Ability to lift, move, and carry objects weighing 75lbs. or greater, • Must be able to walk, sit, stand, bend, reach, and climb, • Must be able to work in confined spaces and at heights, including climbing tanks, ladders, scaffolding, towers, piping systems, catwalks, structural steel, and wind turbines, • Perform physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking and stooping, • Working extended hours and standing for extended periods of time, • Work in indoor and outdoor environments in conditions of extreme heat and/or cold, • Work in and near industrial hazards, • Must be able to walk and climb except when performing non-field duties, • Remain consistently active throughout shift, • Sufficient clarity of speech and hearing and other communication capabilities, with or without reasonable accommodation, which permits the employee to communicate effectively, • Sufficient vision (close vision and distance vision) or other powers of observation, with or without reasonable accommodation, which permits the employee to investigate, • Sufficient manual dexterity, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties, • Sufficient personal mobility and physical reflexes, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties and travel to off-site locations, • Must be able to wear safety equipment as required by the safety department for personal protection (PPE), • Ability to maintain focus and multitask effectively, • Exhibit sensible and responsible behavior, • Ability to work autonomously or within a team environment Benefits: Dental Insurance Vision Insurance Health Insurance Paid Time Off (PTO) 401(k) w/Matching Flexible Spending Account Health Savings Account NOTE: To be considered, applicants must be able to provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification. Apave America Inc. is an equal opportunity employer that prohibits discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, and other protected characteristics. We make hiring decisions based solely on qualifications, merit, and business needs. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees.

Job Description Rotating Machinery Services, Inc (RMS Inc.) is seeking a qualified Manual Machinist to work 1st shift and perform a variety of machining practices involved in turning, milling, drilling, threading operations, etc. They perform a detailed incoming inspection using micrometers and other fine measurement tools, learn to draw prints based on their findings and make recommendations on necessary critical repairs. As well rounded machinists and fabricators they are able to select and operate the proper machine shop tools to remove damaged babbitt and prepare the bearing for repair. They may also use raw materials, welding tools, flame spraying, or electrical test equipment to manufacture, alter or test components as part of the process. During the babbitting process they move the part to our custom foundry where they apply new babbitt using various casting techniques. Once the babbitt is cast, their skill at precision machining and metalworking outputs a finished bearing crafted to precise dimensions. Using non-destructive testing techniques and measurement tools they verify the quality and dimensions of their work before preparing the bearing to ship to the customer. JOB REQUIREMENTS AND QUALIFICATIONS • Ability and willingness to be in the shop environment a minimum of 8 hours per day, primarily standing and sitting., • Ability and willingness to work around and use large propane / acetylene., • Ability to operate small lifts, pallet jacks and other lifting equipment (training will be provided on our specific equipment, but basic skills are required beforehand)., • Advanced oral and written communication., • Advanced math skills to calculate tolerances and dimensions., • Must be able to read and understand Blueprints and G-Code., • Must be familiar with basic machining practices involved in turning, milling, drilling, threading operations., • Must be competent reading drawings and following instructions necessary to produce usable and saleable parts., • Must be able to hold tolerances as dictated by drawings, written instructions, or industry standards., • Must be proficient with the use of, the care of, and the calibration of all types of measuring devices (i.e., micrometers (OD and ID), dial calipers, dial indicators, etc.)., • Must possess and provide basic tools required for the execution of the position of manual machinist. Education: • OMEGA experience, • Proficient in running horizontal lathes and milling machines., • Capable of reading drawings and proper use of calibrated measuring tools., • Can hold tolerances of .0005"., • Read drawings and use of micrometers., • Basic machining knowledge and practices required., • While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift., • Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance., • The position will be based full-time in our South Houston, TX facility., • Availability to work weekends, holidays and overtime to meet company needs., • Able to understand, read, write, and speak English proficiently., • Authorized to work in the United States., • Able to pass a pre-employment drug screen, background check and physical requirements., • This role can be required to participate in company and/or customers random drug testing requirements., • While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift., • Ability and willingness to lift objects weighing up to 50 lbs. with assistance, walk, climb, reach above head, and balance., • Must be able to use hands for assembly and tool usage. While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles. WHAT WE OFFER • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description We are seeking a highly skilled and experienced Senior Systems Engineer / Controls Engineer to support the design, implementation, and maintenance of advanced control systems, including automation and specialized Leak Detection Systems (LDS). This critical role ensures the reliability, security, and performance of our control infrastructure, with a strong emphasis on Siemens PLC and SCADA technologies within the Oil & Gas industry. This position requires travel up to 50% of the time Key Duties and Functional Responsibilities The successful candidate will be responsible for the full lifecycle management of control systems, from development through field support. • System Management & Upgrades: Manage the development, configuration, maintenance, and upgrades of HCNA control systems, including automation and Leak Detection Systems (LDS)., • PLC Programming: Develop and troubleshoot robust applications using SIMATIC Step 7 (TIA Portal), leveraging expertise in Ladder Logic and Structured Text, with integration to SQL Server., • SCADA Programming: Design, implement, and maintain high-performance SCADA/HMI solutions using WinCC (versions 6.0–7.5 and TIA Portal)., • Functionality Enhancement: Develop new functionalities to enhance automation and LDS software based on customer and internal requirements., • Testing & Validation: Test new PLC hardware/software for compatibility with existing systems and execute PLDS site testing per approved procedures and checklists., • Technical Support: Provide high-level technical assistance, troubleshooting, maintenance, and upgrades for complex control system issues., • Field Support: Support essential field activities including commissioning, startup, customer training, acceptance testing, and detailed O&M manual development. Educatiion • Proven experience designing, programming, implementing, and troubleshooting industrial PLC and HMI systems, preferably in the Oil & Gas industry., • Expert, hands-on expertise with Siemens PLCs (S7-300, S7-400, S7-1200, S7-1500)., • Strong working knowledge of WinCC for SCADA/HMI development, including tag configuration, graphical interface design, reporting, trending, archiving, and scripting., • Proficiency in SIMATIC Step 7 (TIA Portal) for PLC programming., • Strong knowledge of Siemens networking architecture and communication protocols (MPI, Profibus, Profinet)., • Experience with network configurations (serial, TCP/IP, fiber optic converters)., • Familiarity with Siemens, GE Fanuc, and Allen-Bradley PLCs, with working knowledge of other platforms., • Knowledge of industrial protocols such as MODBUS, Data Highway, OPC, OPC UA, and integration using devices like Red Lion Protocol Converters., • Proficiency in scripting/programming for automation customization, including SQL Server integration., • Advanced certifications in automation technologies (highly desirable)., • Commissioning: Proven ability to commission systems from design through startup, including customer training and acceptance testing., • Communication: Strong verbal communication skills, especially when integrating HCNA systems with client pump control systems and translating complex technical concepts for non-technical stakeholders., • Documentation: Exceptional documentation skills, including the ability to write detailed technical reports (commissioning, annual, quarterly, and support visits)., • Problem-Solving: Excellent problem-solving abilities, attention to detail, and the ability to work independently or collaboratively within a team environment.Company DescriptionAt Hansa Consult of North America, LLC (HCNA), we provide US EPA Third-Party certified leak detection solutions for fuel hydrant and pipeline systems. As a privately held company based in New Hampshire, we provide state-of-the-art leak detection for the U.S. DOD and commercial aviation customers in the U.S. and around the globe.At Hansa Consult of North America, LLC (HCNA), we provide US EPA Third-Party certified leak detection solutions for fuel hydrant and pipeline systems. As a privately held company based in New Hampshire, we provide state-of-the-art leak detection for the U.S. DOD and commercial aviation customers in the U.S. and around the globe.

Company Description John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description Sets up, writes programs and edits existing programs, and operates numerically controlled machinery. These include but are not limited to lathes, mills, drills, and other machinery as required. \n • Maintains quality and tolerances within .0003".\n, • Follow written and verbal procedures for machining and other duties.\n, • Work from work order routings, prints, sketches, layout sheets, written and verbal instructions.\n, • Working knowledge of programming languages and the ability to learn / adapt per machine.\n, • Must be able to recognize and understand functions of machine parameters with the ability to modify as required per supervisor's instructions.\n, • Utilize knowledge of working properties for a variety of materials such as stainless steel, alloy steel, cast iron, brass, exotics, etc.\n, • Presets tools and may be required to re-sharpen.\n, • Inspect work produced using micrometer; bore gage, venire calipers, or other measuring instruments to verify conformance to specifications.\n, • Follow preventative maintenance procedures on equipment as prescribed by supervisor and report operating difficulties of equipment to supervisor.\n, • Perform duties in accordance with company safety policies, reports unsafe conditions to supervisor.\n, • Make proper labor and time reports.\n, • Perform other duties as required.\n, • Keep machine(s) / work area clean and orderly.\n, • Perform additional duties and responsibilities based upon individual branch requirements.\n, • Additional duties as assigned.\n\n Qualifications \n • High school diploma or equivalent with a technical school education and working machinist knowledge or equivalent.\n, • Minimum 3 years of CNC machine tool Programming & Operating experience.\n, • Numerical control machining skills experience and ability to read and interpret work related machine drawings.\n, • Make average to complicated mathematical calculations and resolve elementary technical problems.\n, • CNC Programmer/Operator will be compensated in accordance with defined expertise, experience and production efficiency.\n, • Can operate a minimum of 2 CNC machine tools.\n, • Possesses previous experience as a Manual machinist.\n, • Must be detail oriented; be able to work independently using sound judgment.\n, • Good verbal, written, problem solving and organization skills required.\n, • Capable of handling multiple priorities.\n, • Ability to complete tasks in a timely and efficient manner.\n\n Additional Information With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

Job DescriptionMain Function: • Inspection and maintenance of engineering test equipment, tools, and server room assets., • Coordination of testing processes with active participation (e.g. setting up new stations, prioritizing tasks, product testing)., • Active involvement in the repair and fault analysis of failed test products., • Manual and electronic data recording., • Production support and collaboration with test engineers.Duties and Responsibilities:, • The Test Technician is responsible for supporting the production line., • Providing the Engineering Department with relevant information as needed (any issues must be reported to the direct supervisor and Engineering)., • Performing additional installation tasks., • Monitoring of server operations., • Timely notification to Engineering about the depletion of spare parts., • Decision-making authority:, • Responsible for maintaining the quality of the tasks and processes listed in the job description., • Authorized to carry out routine maintenance, testing, and installation tasks without prior approval, in accordance with established procedures and work instructions., • Permitted to escalate technical issues and suggest process improvements directly to the Engineering teamQualification and Experience:, • Minimum of secondary education., • Proficiency in technical English., • User-level knowledge of Microsoft Office and Microsoft operating systems (including Windows 10, Windows Server 2012 R2, and Windows Server 2016).Primary Skills:, • Knowledge of computer networks. EO9UQuwOFX

Job Description Company Description: For over 75 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions — with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: • Process Control & Safety Systems, • Control Valves & Regulators, • Isolation Valves & Actuation, • Oil & Gas Automation, • Reliability Solutions & Services, • Pressure Management, • Specialty Pumps & Rotating Equipment, • Instrumentation Inspection & Testing • Perform incoming inspections of pressure relief valves to assess condition and identify defects., • Verify dimensional accuracy, material specifications, and component integrity after and after repair., • Oversee hydrostatic, pneumatic, and functional testing to confirm valve performance., • Monitor repair activities to ensure adherence to approved procedures and OEM specifications., • Validate calibration of tools, gauges, and test benches used in valve repair., • Ensure replacement parts meet quality and certification requirements., • May communicate with customers directly to discuss specific issues found., • Maintain the work area and equipment in a clean and orderly condition., • Maintain detailed inspection records, test reports, and repair certifications., • Ensure compliance with ASME, API, ISO, and other applicable standards., • Identify recurring defects and recommend corrective/preventive actions., • Collaborate with technicians and engineers to improve repair processes., • Provide training and guidance on quality standards and inspection techniques., • Inspects valve and/or actuation assets against inspection forms. Ensures compliance to repair procedures and standards., • Initiate non-conformances for assets that fail inspections against inspection forms., • Monitor status of open non-conformances and work with Supervisors and Managers to ensure timely action., • Escalate Quality Issues to relevant leadership as necessary., • Suggest quality and process improvements to leadership. Drive implementation of processes as required. Education / Experience / Skills • Technical diploma or degree in Mechanical Engineering or related field., • Minimum 3–5 years of experience in valve inspection, repair, or industrial equipment quality assurance., • Strong knowledge of pressure relief valve standards (ASME Section VIII, API 576, NBIC)., • Proficiency in using precision measuring instruments (micrometers, calipers, gauges)., • Ability to work non standard hours/after hours., • Familiarity with non-destructive testing (NDT) methods is a plus., • Ability to safely use and maintain a large variety of tools and equipment, associated with the assembly of relief valves, including impact wrenches, electric and manual hand tools, lapping machines, and overhead cranes and forklifts., • Ability to read customer specification sheets and basic dimensional drawings., • Ability to read and interpret assembly manuals (i.e. Manufacturers’ Spring charts), engineering drawings and technical specifications., • Good computer skills., • Ability to work independently or as a team member., • Ability to work with minimum supervision., • Attention to detail and strong analytical skills., • Excellent documentation and reporting skills., • Strong communication and teamwork abilities., • Commitment to safety and regulatory compliance.

Job Description Title: Market Development Specialist Location: Pasadena, TX Who we are: Voted one of the Nation's Best and Brightest Companies to Work for, Kuraray America, Inc. (KAI) is a global leader in specialty chemical, fiber, and resin production. With top-of-the-line research and production facilities and a vast network of supplies from around the world, Kuraray leads the industry in specialty dental, fiber, resin, and elastomer products. Kuraray America is a wholly owned subsidiary of Kuraray Company, Ltd. Based in Tokyo, Japan. Kuraray has operations in 32 countries and employs more than 11,000 employees, including over 800 in the United States. Why Kuraray: Kuraray is building a better tomorrow, today. Our team members are dedicated to expanding our business with committed professionals who share essential values such as integrity, excellence, teamwork, and accountability. As a part of Kuraray America, Inc., our team shares the advantages of working for the leader in specialty chemicals, resins, and fibers. Our international presence and resources allow us to be a world-leading innovator in the industries we service. Yet, despite our size, our people are more than just a number. As a new team member, you can expect to earn responsibility quickly. Our commitment to our people is visible in our comprehensive benefits package. As a Kuraray team member, you will have the opportunity to enjoy competitive salaries and benefits, incentive opportunities, and an excellent work environment. Position Summary: We are seeking a Market Development Specialist to drive the growth of EVAL and PLANTIC across the Americas within our Technical Service & Development (TS&D) organization. This hybrid role integrates polymer technical service, food science, and market development expertise. The Specialist will engage with brand owners to showcase the sustainable advantages of EVAL and PLANTIC, guiding them through the evaluation process to commercialization in innovative food packaging or other industrial applications. Success in this role requires a strong foundation in materials and polymer processing, flexible packaging structure development, food stability testing, and the ability to assess packaging performance-particularly in meeting or exceeding brand expectations for recyclable solutions compared to traditional, non-recyclable high-performance laminates. The primary objective is to identify new market opportunities, support product launches, and collaborate with cross-functional teams to advance innovation, sustainability, and growth, with a strong emphasis on food packaging. Responsibilities: Food Science & Innovation • Design food stability experiments using EVAL and PLANTIC packaging technologies to demonstrate benefits compared to traditional packaging, • Apply food science expertise to evaluate product aging and redesign packaging to optimize shelf-life performance and/or quality preservation., • Research global market trends, consumer demands, benchmark studies, recycling standards, and sustainability drivers., • Support new product introductions with market analysis and application demonstrations in the form of customer presentations., • Identify new market opportunities for EVAL and PLANTIC in food and pharma packaging as well as in industrial applications. The focus of this role is food packaging., • Work closely with TS&D to develop a solution, with Sales to close opportunities, and with Marketing Communication teams to publish successes., • Grow awareness of EVAL and Plantic products by representing the company in industry associations, positioning them as strong solutions towards the circular economy., • Collaborate with the marketing communications team to create appropriate publications, targeted advertising, and other promotional tactics to position EVAL as the barrier leader in all segments., • Coordinate the approvals of such public communications locally with the KAI EVAL leadership team and globally with the corresponding counterparts in Kuraray Japan., • Conduct extrusion trials on pilot scale equipment to process EVOH in the form of film or cast samples, • Execute manual or coordinate automatic form, seal, and fill packaging to test the performance of the elucidated prototypes., • Interpretation of results regarding oxygen and moisture barrier, mechanical properties, and sealing curves., • Generate application data, technical reports, and training materials for customers and internal stakeholders. Stakeholder Engagement & Collaboration • Travel (30-40%) to customer and brand owner sites, conferences, and international meetings., • Present technical findings, trial outcomes, and market insights to internal and external stakeholders., • Lead projects through influence, collaborating with cross-functional multicultural teams including R&D, Sales, Marketing, and technical Teams to drive commercialization., • Contribute to product innovation, circular economy, and sustainability initiatives., • Use data analysis tools to evaluate product performance, market impact, and customer or brand owner ROI. Minimum Qualifications: • Bachelor's degree in Food Science, Food Engineering, Food Technology, Chemical Engineering, Polymer Science, Plastics Engineering, Materials Science, or Mechanical Engineering., • Minimum of 5 years in packaging, food applications, or medical packaging sectors, • Knowledge of plastic materials, converting processes (extrusion, lamination, printing), and food science., • Experience with brand owners, converters, technical sales and/or technical marketing roles., • Excellent communication, presentation, and project management skills., • Strong analytical thinking, problem-solving, and customer-facing abilities., • Innovative mindset with adaptability to diverse working environments, • Capable to handle multiple projects and responsibilities simultaneously., • Candidates must have a valid driver's license. Competencies: • Customer Focus, • Building strong customer relationships and delivering customer-centric solutions., • Business Insight, • Applying knowledge of business and the marketplace to advance the organization's goals., • Cultivates Innovation, • Creating new and better ways for the organization to be successful., • Action Oriented, • Taking on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm., • Ensures Accountability, • Holding self and others accountable to meet commitments., • Drives Results, • Consistently achieving results, even under tough circumstance, • Collaborates, • Building partnerships and working collaboratively with others to meet shared objectives., • Values Difference, • Recognizing the value that different perspectives and cultures bring to an organization, • Communicates Effectively, • Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences., • Courage, • Stepping up to address difficult issues, saying what needs to be said., • Instills Trust, • Gaining the confidence and trust of others through honesty, integrity, and authenticity., • Situational Adaptability, • Adapting approach and demeanor in real time to match the shifting demands of different situations. We offer a competitive compensation package that includes base pay and an annual incentive. This program is designed to reward individual performance and align overall rewards with corporate and team performance. Our employees benefit from a robust healthcare package that includes wellness reimbursements, along with generous perks such as three weeks of paid time off, ten company holidays, paid parental leave, education reimbursement, and a matching 401k plan, among other offerings. Applicants must be authorized to work for ANY employer in the U.S. Learn more at kuraray.us.com/careers/ Kuraray America, Inc. is an Equal Employment Opportunity/disability/protected veteran status No third-party candidates accepted. Job Posted by ApplicantPro

Job DescriptionCompany Description John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description Previous experience repairing CNC machines is needed. • Complete preventative maintenance on all facility equipment to include CNC lathes and mills, manual lathes and mills, and other facility equipment., • Analyzes machine problems by using troubleshooting techniques, repair manuals, drawings or manufacturers’ specifications to determine logical approach to correct the problem., • Disassembles machines to find & replace worn or damaged parts and reassembles., • Utilizes measuring instruments such as micrometer, caliper, dial indicator and precision level will be required., • Relocates, installs, and aligns machines and equipment., • Coordinate and schedule third party vendors for repairs and maintenance as needed., • Perform duties in accordance with company safety policies., • Additional duties as assigned.Qualifications, • High school diploma or equivalent required, • Previous experience as a CNC machinist is preferred, • Experience repairing Mazak and Haas equipment is a plus, • Minimum of 3 years of previous related or subordinate experience, • Vocational/Technical Certification preferred, • Ability to read and interpret average assembly and machine drawings, • Ability to obtain a certification to drive power industrial vehicles (forklift & scissors lift), • Attention to detail and strong problem-solving skills, • Ability to effectively communicate, • High level of analytical ability, • Ability to work in a diverse environment, • Complete all work in a safe manner and follow all safety requirements consistent with supporting the Company’s goals., • Lifting guidelines in accordance with the Manual Lifting Guidelines noted in the Safety Handbook., • Follow all environmental requirements consistent with supporting the company’s environmental performance goals., • Complete, and actively participate in all other EHS training requirements. Additional Information With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Company Description John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description Previous experience repairing CNC machines is needed. \n • Complete preventative maintenance on all facility equipment to include CNC lathes and mills, manual lathes and mills, and other facility equipment.\n, • Analyzes machine problems by using troubleshooting techniques, repair manuals, drawings or manufacturers' specifications to determine logical approach to correct the problem.\n, • Disassembles machines to find & replace worn or damaged parts and reassembles.\n, • Utilizes measuring instruments such as micrometer, caliper, dial indicator and precision level will be required.\n, • Relocates, installs, and aligns machines and equipment.\n, • Coordinate and schedule third party vendors for repairs and maintenance as needed.\n, • Perform duties in accordance with company safety policies. \n, • Additional duties as assigned.\n\n Qualifications \n • High school diploma or equivalent required\n, • Previous experience as a CNC machinist is preferred\n, • Experience repairing Mazak and Haas equipment is a plus\n\n\n, • Minimum of 3 years of previous related or subordinate experience\n, • Vocational/Technical Certification preferred\n, • Ability to read and interpret average assembly and machine drawings\n, • Ability to obtain a certification to drive power industrial vehicles (forklift & scissors lift)\n\n\n, • Attention to detail and strong problem-solving skills\n, • Ability to effectively communicate\n, • High level of analytical ability\n, • Ability to work in a diverse environment\n, • Complete all work in a safe manner and follow all safety requirements consistent with supporting the Company's goals.\n, • Lifting guidelines in accordance with the Manual Lifting Guidelines noted in the Safety Handbook.\n, • Follow all environmental requirements consistent with supporting the company's environmental performance goals.\n, • Complete, and actively participate in all other EHS training requirements.\n\n Additional Information With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

Job DescriptionSalary: We offer competitive pay, comprehensive benefits, company matched 401k, and opportunities to build a rewarding career with Apave America Inc. Position Overview: The API 510/570/653 Inspector will conduct visual examinations of pressure retaining equipment such as tanks, piping, and vessels ensuring their mechanical integrity by performing visual inspections according to established API standards and codes (i.e. 510 for pressure vessels, 570 for piping, and 653 for storage tanks), to identify potential issues, maintaining documented reports of inspection findings, recommend necessary repairs, and certifyingcompliance with industry regulations. Conduct Inspections and Assessments • Inspect pipelines, pressure vessels, storage tanks, and other critical infrastructure for signs of wear, corrosion, cracks, leaks, or other damage., • Perform internal and external inspections based on industry standards like API 510 (pressure vessels), API 570 (piping), or API 653 (storage tanks)., • Document findings from inspections, including any defects or non-conformities., • Provide detailed reports that include photographic evidence, measurements, and recommendations for corrective actions., • Identify potential risks and hazards based on inspection findings., • Recommend corrective actions, including repairs, replacements, or modifications to maintain safety and integrity., • Supervise NDT methods (such as ultrasonic testing, radiographic testing, magnetic particle testing, or dye penetrant testing) to detect subsurface or surface defects., • Ensure that inspections and assessments align with all relevant regulatory standards and safety protocols., • Assist with regulatory audits and maintain compliance with industry standards to minimize downtime and potential hazards., • Work with engineers, maintenance teams, and management to develop inspection schedules and action plans., • Provide technical advice and guidance on repair and maintenance strategies., • Track and monitor equipment performance over time and report any changes or declines in condition., • Maintain necessary API certifications and participate in ongoing training to stay updated with the latest inspection standards, tools, and technologies., • Ensure that inspections are carried out according to established quality assurance standards and practices., • Verify that the equipment meets the required operational and safety standards before returning to service. Required Skills and Experience: • High School Diploma or equivalent is required., • Minimum of two (2) years' experience working with the 510, 570, and/or 653 certifications required., • Minimum of API 510 and 570 certifications are required., • Additional API 653 certification will be considered an asset., • Certifications in NDT methods (MT/PT/UTT) would be considered an asset., • Valid Drivers License and pre-access drug and alcohol testing required., • Pre-employment background checks will be required. Work Conditions: • Field duties require indoor and outdoor work in diverse industrial environments with varying climate conditions, • Interaction with other crew employees, as well as supervisors, client personnel and a wide range of stakeholders, • Working in a plant and/or shop area around production machinery with extreme noise levels, • Work from various levels of heights and/or confined spaces for long periods of time, • Wear safety equipment as required by the safety department for personal protection (PPE) Physical and Mental Requirements: • Ability to lift, move, and carry objects weighing 75lbs. or greater, • Must be able to walk, sit, stand, bend, reach, and climb, • Must be able to work in confined spaces and at heights, including climbing tanks, ladders, scaffolding, towers, piping systems, catwalks, structural steel, and wind turbines, • Perform physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking and stooping, • Working extended hours and standing for extended periods of time, • Work in indoor and outdoor environments in conditions of extreme heat and/or cold, • Work in and near industrial hazards, • Must be able to walk and climb except when performing non-field duties, • Remain consistently active throughout shift, • Sufficient clarity of speech and hearing and other communication capabilities, with or without reasonable accommodation, which permits the employee to communicate effectively, • Sufficient vision (close vision and distance vision) or other powers of observation, with or without reasonable accommodation, which permits the employee to investigate, • Sufficient manual dexterity, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties, • Sufficient personal mobility and physical reflexes, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties and travel to off-site locations, • Must be able to wear safety equipment as required by the safety department for personal protection (PPE), • Ability to maintain focus and multitask effectively, • Exhibit sensible and responsible behavior, • Ability to work autonomously or within a team environment Benefits: • Dental Insurance., • Vision Insurance., • Health Insurance., • Paid Time Off., • 401(K) W/Matching., • Flexible Spending Account., • Health Savings Account. NOTE: To be considered, applicants must be able to provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification. * Apave America Inc. is an equal opportunity employer that prohibits discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, and other protected characteristics. * We make hiring decisions based solely on qualifications, merit, and business needs. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees.

Job DescriptionSalary: Position Summary: We are seeking a skilled and motivated Rope Access Advanced UT Technician to join our team. In this role, you will utilize advanced rope access techniques and non-destructive testing (NDT) methods to inspect and assess critical structural components. The ideal candidate will possess technical expertise, a strong commitment to safety, and the ability to work effectively in challenging environments. This position requires 100% travel. Key Responsibilities: Non-Destructive Testing (NDT): • Perform NDT inspections using advanced ultrasonic methods such as Phased Array Ultrasonic Testing (PAUT), Time of Flight Testing (ToFT), • Assess structural integrity and detect defects in composite materialsand welds., • Prepare detailed reports of findings, including photographic evidence. Rope Access Operations: • Execute tasks safely using rope access techniques in accordance with IRATA or SPRAT standards., • Rig and inspect anchor systems to ensure secure rope access setup. Safety and Compliance: • Adhere to all safety protocols and guidelines to protect yourself and team members., • Conduct site-specific hazard assessments, including Job Site Analysis (JSA)., • Ensure compliance with industry standards, regulatory requirements, and client specifications. Equipment Maintenance and Documentation: • Maintain, inspect, and calibrate NDT equipment to ensure accuracy and reliability., • Record inspection results and maintain accurate documentation of certifications, equipment usage, and findings., • Communicate inspection outcomes to supervisors, clients, and team members. Team Collaboration: • Work closely with site supervisors, clients, and other technicians to complete projects on time and to a high standard., • Assist in training and mentoring less experienced technicians as required., • Contribute to a positive team environment while upholding safety as a priority. Qualifications, Skills and Requirements: • High School Diploma or equivalent is required, • Must be at a minimum of eighteen (18) years of age, • IRATA and/or SPRAT Level 1/2/3 is required, • Valid NDT certifications in one or more methods (e.g., PAUT, TOFT) is required, • Valid driver's license and clean driving record is required, • Proven experience conducting NDT inspections, preferably in rope access environments, • Familiarity with interpreting codes, standards, and specifications for NDT methods, • Pre-employment background checks will be required, • Valid TWIC Card or the ability to obtain a valid TWIC Card Technical Skills: • Competence in setting up and calibrating NDT equipment, • Ability to interpret technical drawings, inspection data, and test results, • Field duties require indoor and outdoor work in diverse industrial environments with varying climate conditions, • Interaction with other crew employees, as well as supervisors, client personnel and a wide range of stakeholders, • Working in a plant and/or shop area around production machinery with extreme noise levels, • Work from various levels of heights and/or confined spaces for long periods of time, • Wear safety equipment as required by the safety department for personal protection (PPE), • May require working from heights at 250 or greater, • Travel to different job sites as needed, sometimes on short notice, • May require shiftwork (days, evenings, nights) Physical and Mental Requirements: • Ability to lift, move, and carry objects weighing 75lbs. or greater, • Must be able to walk, sit, stand, bend, reach, and climb, • Must be able to work in confined spaces and at heights, including climbing tanks, ladders, scaffolding, towers, piping systems, catwalks, structural steel, and wind turbines, • Perform physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking and stooping, • Working extended hours and standing for extended periods of time, • Work in indoor and outdoor environments in conditions of extreme heat and/or cold, • Work in and near industrial hazards, • Must be able to walk and climb except when performing non-field duties, • Remain consistently active throughout shift, • Sufficient clarity of speech and hearing and other communication capabilities, with or without reasonable accommodation, which permits the employee to communicate effectively, • Sufficient vision (close vision and distance vision) or other powers of observation, with or without reasonable accommodation, which permits the employee to investigate, • Sufficient manual dexterity, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties, • Sufficient personal mobility and physical reflexes, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties and travel to off-site locations, • Must be able to wear safety equipment as required by the safety department for personal protection (PPE), • Excellent physical fitness and the ability to endure prolonged outdoor work in varying weather conditions, • Comfort working from heights at 250 or greater, • Ability to maintain focus and multitask effectively, • Exhibit sensible and responsible behavior, • Ability to travel to different job sites, sometimes on short notice, • Ability to work shiftwork if needed and/or required Compensation and Benefits: • Competitive salary based on experience and certifications, • Comprehensive benefits package, • Dental Insurance, • Vision Insurance, • Health Insurance, • Paid Time Off (PTO), • 401(K) W/ Co. Matching, • Flexible Spending Account, • Health Savings Account, • Opportunities for career growth and obtain additional certifications NOTE: To be considered, applicants must be able to provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification. * Apave America Inc. is an equal opportunity employer that prohibits discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, and other protected characteristics. * We make hiring decisions based solely on qualifications, merit, and business needs. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees.

Job DescriptionSalary: Apave America offers an employee-centric company culture, competitive pay, full benefits, and opportunities to build a rewarding career full of growth & advancement. Position Overview: The NDT Level II (Non-Destructive Testing) Technician is a skilled professional who independently performs inspections on materials and components using various NDT methods like Radiography Testing (RT), Ultrasonic Thickness Testing (UTT), Magnetic Particle Testing (MT), or Penetrant Testing (PT), to detect flaws or defects while adhering to established standards and procedures, interpreting results, and documenting findings in detailed reports; essentially acting as a quality control inspector with advanced NDT knowledge and certification to work autonomously on complex projects. Key responsibilities of a Level II NDT Technician: Requirements for a Level II NDT Technician: Work environments where Level II NDT Technicians are employed: • Manufacturing facilities, • Oil and gas industry, • Aerospace industry, • Construction industry, • Power generation plants, • Pipeline companies Required Skills and Experience: • High School Diploma or equivalent is required, • Must be at least eighteen (18) years of age, • SNT Level II certification in one or more of the following methods MT/PT/UTT/RT/PMI/ISQ required, • Current SPRAT and/or IRATA Rope Access certification will be considered an asset, • Refinery experience is considered a plus, • Capable of training NDT assistants, • Valid Drivers License and pre-access drug and alcohol testing required, • Pre-employment background checks will be required, • Valid TWIC Card and/or knowledge of PIN to TWIC Card may be required for some sites/location, • Ability and willingness to travel to multiple job sites may be required, sometimes with little notice Work Conditions: • Field duties require indoor and outdoor work in diverse industrial environments with varying climate conditions, • Interaction with other crew employees, as well as supervisors, client personnel and a wide range of stakeholders, • Working in a plant and/or shop area around production machinery with extreme noise levels, • Work from various levels of heights and/or confined spaces for long periods of time, • Wear safety equipment as required by the safety department for personal protection (PPE) Physical and Mental Requirements: • Ability to lift, move, and carry objects weighing 75lbs. or greater, • Must be able to walk, sit, stand, bend, reach, and climb, • Must be able to work in confined spaces and at heights, including climbing tanks, ladders, scaffolding, towers, piping systems, catwalks, structural steel, and wind turbines, • Perform physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking and stooping, • Working extended hours and standing for extended periods of time, • Work in indoor and outdoor environments in conditions of extreme heat and/or cold, • Work in and near industrial hazards, • Must be able to walk and climb except when performing non-field duties, • Remain consistently active throughout shift, • Sufficient clarity of speech and hearing and other communication capabilities, with or without reasonable accommodation, which permits the employee to communicate effectively, • Sufficient vision (close vision and distance vision) or other powers of observation, with or without reasonable accommodation, which permits the employee to investigate, • Sufficient manual dexterity, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties, • Sufficient personal mobility and physical reflexes, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties and travel to off-site locations, • Must be able to wear safety equipment as required by the safety department for personal protection (PPE), • Ability to maintain focus and multitask effectively, • Exhibit sensible and responsible behavior, • Ability to work autonomously or within a team environment Benefits: • Dental Insurance, • Vision Insurance, • Health Insurance, • Paid Time Off, • 401(K) W/Matching, • Flexible Spending Account, • Health Savings Account NOTE: To be considered, applicants must be able to provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification. * Apave America Inc. is an equal opportunity employer that prohibits discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, and other protected characteristics. * We make hiring decisions based solely on qualifications, merit, and business needs. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees.

Job DescriptionSalary: We offer competitive pay, comprehensive benefits, company matched 401k, and opportunities to build a rewarding career with Apave America Inc. Combined General Job Description for NCCER and AMPP Personnel Position Overview: This Job Description encompasses the skills and responsibilities of individuals certified by both the National Center for Construction Education and Research (NCCER) and the Association for Materials Protection and Performance (AMPP). This combined Job Description highlights the fundamental responsibilities of individuals holding certifications from both NCCER and AMPP. Specific duties may vary depending on the particular certifications obtained and the industry or project requirements. General Responsibilities • Adherence to safety standards and regulations, specifically OSHA standards., • Commitment to continuous learning and staying updated on industry advancements., • Strong communication skills for effective collaboration with team members and stakeholders., • Problem-solving skills to address challenges and implement solutions effectively., • Proficiency in various industrial crafts (e.g. insulation, pipefitting, sheet metal, electrical, welding, rigging, etc.) based on specific NCCER certifications obtained., • Understanding and application of basic safety principles and practices in an industrial setting., • Knowledge and effective use of hand tools and power tools (e.g. measuring tools, handsaws, etc.)., • Ability to read and interpret blueprints., • Competency in basic rigging and materials handling., • Practical application of construction math principles., • Specialization in areas such as the installation, repair, and removal of insulation, and/or high-and low-pressure piping systems, sheet metal and more, based on specific NCCER certifications., • Expert knowledge of AMPP standards and procedures related to protective coatings and corrosion control., • Performing coatings inspections to assess the integrity and quality of protective coatings., • Ensuring safe working conditions during coatings application and inspection processes., • Completing and submitting detailed inspection reports., • Function testing equipment to ensure proper operation., • Overseeing operations to ensure compliance with AMPP standards., • Accessing and evaluating internal and external coatings., • Monitoring coating applications to ensure proper adherence to specifications., • Collaboration with contractors, project managers, and stakeholders to communicate concerns and ensure work team qualifications., • Potentially specializing in areas like creating paint maintenance programs, conducting site surveys, and understanding appropriate safety, environmental, and health issues in the protective coatings field. Required Skills and Experience: • High School Diploma or equivalent is required., • Must be at least eighteen (18) years of age., • Minimum of two (2) years' experience working with one or more of the following NCCER and/or AMPP services: Installation, repair and removal of insulation, sheet metal, high-and low-pressure piping systems, corrosion monitoring, coatings inspection and coating applications, etc.), • Minimum of one or more of the following certifications: NCCER and/or AMPP, • Certifications in NDT methods (MT/PT/UTT/RT) would be considered an asset., • Valid Drivers License and pre-access drug and alcohol testing required., • Pre-employment background checks will be required., • Valid TWIC Card or the knowledge of PIN to TWIC Card may be required for some sites/locations., • Travel may be required for some sites/locations sometimes with little notice. Work Conditions: • Field duties require indoor and outdoor work in diverse industrial environments with varying climate conditions, • Interaction with other crew employees, as well as supervisors, client personnel and a wide range of stakeholders, • Working in a plant and/or shop area around production machinery with extreme noise levels, • Work from various levels of heights and/or confined spaces for long periods of time, • Wear safety equipment as required by the safety department for personal protection (PPE) Physical and Mental Requirements: • Ability to lift, move, and carry objects weighing 75lbs. or greater, • Must be able to walk, sit, stand, bend, reach, and climb, • Must be able to work in confined spaces and at heights, including climbing tanks, ladders, scaffolding, towers, piping systems, catwalks, structural steel, and wind turbines, • Perform physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking and stooping, • Working extended hours and standing for extended periods of time, • Work in indoor and outdoor environments in conditions of extreme heat and/or cold, • Work in and near industrial hazards, • Must be able to walk and climb except when performing non-field duties, • Remain consistently active throughout shift, • Sufficient clarity of speech and hearing and other communication capabilities, with or without reasonable accommodation, which permits the employee to communicate effectively, • Sufficient vision (close vision and distance vision) or other powers of observation, with or without reasonable accommodation, which permits the employee to investigate, • Sufficient manual dexterity, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties, • Sufficient personal mobility and physical reflexes, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties and travel to off-site locations, • Must be able to wear safety equipment as required by the safety department for personal protection (PPE), • Ability to maintain focus and multitask effectively, • Exhibit sensible and responsible behavior, • Ability to work autonomously or within a team environment Benefits: • Dental Insurance., • Vision Insurance., • Health Insurance., • Paid Time Off., • 401(K) W/Matching., • Flexible Spending Account., • Health Savings Account. NOTE: To be considered, applicants must be able to provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification. * Apave America Inc. is an equal opportunity employer that prohibits discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, and other protected characteristics. * We make hiring decisions based solely on qualifications, merit, and business needs. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees.

Job DescriptionJob DescriptionAcademic Programs and Data Associate Beta is a Title I Schoolwide campus. I understand that part or all of this job could be funded with federal funds. Mission The mission of the Academic Programs and Data Associate is to ensure Beta Academy’s academic programs and data systems operate efficiently, accurately, and in alignment with Beta’s mission of excellence. This role supports teachers and administrators by managing curriculum logistics and distribution, ensuring data accuracy, and supporting assessment systems to empower educators with the information and resources they need to deliver high-quality instruction. Position Information Department: Curriculum & Instruction Reports To: Dean of Academics & Chief of Academics Employment Terms: Full-Time / Year-Round / Salary: 44,000 – Non-Exempt Location: In-Person, Beta Academy Confetti or Flagship Campus PayScale F Work Schedule: Monday–Friday, 7:00 AM – 4:30 PM, with occasional extended or evening hours during testing windows, campus events, or teacher in-service days. Work Environment: Professional office and school setting with frequent interaction with teachers, staff, and administrators. Dress code is enforced at all times Position Overview The Academic Programs and Data Associate supports the smooth operation of academic programs and data management systems across Beta Academy. This position is responsible for organizing and maintaining academic materials and curriculum, managing data entry and reporting processes, and providing training and technical support to teachers and staff. Through accuracy, organization, and proactive communication, this role ensures academic programs run efficiently and data-driven decision-making is fully supported. Outcomes * Curriculum and Inventory Management – Curriculum and materials organized, tracked, and maintained with 100% accuracy. * Data Accuracy – Student, assessment, and program data entered and verified with zero major discrepancies during audits. * Teacher Support – Teacher requests for logins, rosters, and materials fulfilled within 2 business days. * Compliance and Reporting – Academic and assessment reports completed and submitted by deadlines (target: 98% on-time rate). * Training and Communication – Teachers trained and supported on data and assessment platforms within established timelines. Responsibilities * Academic Programs & Curriculum Support: • Oversee curriculum logistics, orders, and inventory for all grade levels., • Communicate with vendors and manage quotes, POs, packing slips, and budget codes., • Enter and maintain all instructional materials and resources within eta Beta Academy’s Instructional Materials Management System (Insignia), ensuring all items are cataloged accurately by subject, grade level, and barcode., • Monitor and reconcile inventory within Insignia to maintain real-time accuracy and compliance with state and district inventory requirements., • Troubleshoot staff access to educational applications and online curriculum through Clever (Single Sign-On), ensuring smooth login and roster functionality., • Manage and process curriculum purchase orders in Skyward, including assigning correct curriculum budget codes and coordinating with the Business Department for approvals and payments., • Navigate the Educational Materials Allotment and Textbook (EMAT) system to support instructional materials ordering, tracking, and reporting in accordance with TEA guidelines., • Collaborate regularly with the Business Office team to ensure curriculum purchases align with budget allocations and financial compliance standards., • Demonstrate strong budget awareness by strategically managing curriculum orders, maximizing existing resources, and preventing duplicate purchases through effective tracking and communication., • Lead and organize a curriculum logistics team at each campus to assist with the receipt, unpacking, data entry, and timely distribution of curriculum and instructional materials., • Maintain detailed tracking systems for all orders to ensure curriculum materials are delivered, entered, and distributed on schedule for each grading period and school year., • Provide training and support for teachers and staff on proper inventory procedures and curriculum material use to maintain accountability and extend the lifespan of instructional resources., • Document any damage to curriculum or materials and maintain clear audit trails., • Load rosters into online platforms (e.g., MAP/NWEA, IOWA, DMAC, etc.) and maintain student demographics., • Organize academic events such as Business Day, Lemonade Day, Science Fair, and manage related logistics., • Maintain a clean, organized curriculum room and ensure accurate inventory labeling and processing., • Support the Dean of Academics during assessment windows to ensure testing logistics are 2. Data Management • Enter and manage student enrollment, withdrawal, and performance data in NWEA MAP, Clever, Skyward, and other academic platforms as needed., • Maintain Title I, TIA, and campus performance data accuracy, generating regular and ad-hoc academic data reports as requested by the Chief of Academics and Dean of Academics., • Download, organize, and present assessment and performance data clearly using charts, graphs, and spreadsheets to make information accessible and actionable for teachers, campus leaders, and academic leadership., • Assist with academic data entry into PEIMS as needed. (e.g. HB1416, RTI/MTSS, etc.), • Support teachers and campus leaders with access to assessment and data systems (MAP/NWEA, IOWA, DMAC, Cambium), including troubleshooting login or roster issues., • Compile and prepare summary data for Board of Directors reports and high-level presentations in collaboration with the Chief of Academics and Dean of Academics., • Track and calculate metrics used to determine teacher eligibility for Beta’s Red Star Teacher Incentive Program and other performance-based awards., • Verify that data exports and uploads between systems (Skyward, Clever, Cambium, MAP) function accurately and reflect current student enrollment and rosters., • Collaborate with district and campus staff to ensure all data collection, reporting, and analysis processes meet state, federal, and internal compliance standards. 3. Assessment Coordination Support: • Serve as a key support partner to the Dean of Academics and Principal in organizing and executing all campus and district assessments, including STAAR, MAP/NWEA, AR/STAR, and interim benchmarks., • Assist with testing logistics to ensure smooth, compliant administration, including materials preparation, secure test ticket printing, roster verification in Cambium and other platforms, and technology readiness., • Support the District Testing Coordinator and Dean of Academics by helping implement required accommodations and ensuring compliance with TEA testing guidelines., • Attend all required assessment and compliance trainings to remain current on state and district testing regulations and best practices., • Coordinate with campus staff to prepare and distribute testing materials, confirm student rosters, and troubleshoot access or technical issues before and during testing windows., • Maintain organized digital and physical records of testing materials and participation data to support state and internal reporting. 4. Staff Leadership Responsibilities • Recognizes problems and impediments and reports them promptly with options for solutions to the Dean of Academics and Chief of Academics., • Adheres to and enforces board policy, school guidelines, and administrative directives., • Read and comply with the Procedures Manual, Employee Handbook, Scholar Handbook, and Beta’s Code of Conduct., • Establishes and maintains professional and cooperative working relationships with all stakeholders: parents, scholars, staff, neighbors, and partners., • Promotes and maintains a positive and effective school climate by ensuring that all interactions are prompt, efficient, helpful, and friendly.Core Competencies, • Organization: Manages multiple academic systems, materials, and data sources efficiently., • Attention to Detail: Ensures accuracy in data entry, reports, and inventory management., • Technical Proficiency: Uses academic data systems confidently (DMAC, MAP/NWEA, IOWA, Clever, Skyward, Cambium, Edgenuity)., • Communication: Provides clear, professional, and supportive communication with staff., • Collaboration: Works effectively across departments to support academic and data operations.

Job DescriptionSalary: Apave America offers an employee-centric company culture, competitive pay, full benefits, and opportunities to build a rewarding career full of growth & advancement. Position Overview The NDT Specialist uses combined expertise in Advanced Level II Non-Destructive Testing (NDT) methods with specialized skills in Ultrasonic Testing (UT) and/or Radiographic Testing (RT), including advanced techniques like Phased Array Ultrasonic Testing (PAUT), Time of Flight Diffraction (TOFD), Guided Wave Ultrasonic Testing (GWT), Eddy Current Testing (ECT), Computed Radiography (CR), Digital Radiography (DR), and Real-Time-Radiography (RTR). The NDT Specialist is responsible for independently performing inspections, interpreting results, and documenting findings to ensure the integrity and safety of structures, materials, and equipment across various industries. Key Responsibilities: • Conduct advanced NDT inspections using specialized techniques such as PAUT, TOFD, GUL, GWT, RFT, CR, DR, RTR and ECT to identify corrosion and detect flaws, defects, or other discontinuities in material and components without causing damage., • Operate and maintain various advanced NDT equipment, ensuring proper calibration and functionality., • Interpret test data and identify defects according to relevant codes, standards, and specifications., • Prepare detailed reports of findings, including photographic evidence, and maintain accurate documentation of certifications, equipment usage, and inspection results., • Maintain a safe, secure, and healthy work environment by adhering to company and customer safety standards and legal regulations, including alerting others regarding potential hazards or concerns., • Communicate processes, procedures, and results to customers effectively., • Write or approve procedures for advanced NDT methods as needed. Qualifications: • High School Diploma or equivalent required., • Must be at least eighteen (18) years of age., • Minimum of two (2) years of advanced specialty NDT experience, with full documentation of prior classroom training, on-the-job experience, and certification required., • SNT Level II certifications in one or more of the following advanced NDT methods is required (PAUT, TOFD, GUL, GWT, RFT, RTR, CR, DR, ET)., • Valid IRRSP or State Card is required for Radiographers., • Proficiency in blueprint reading and interpretation, basic mathematics, and QA system requirements preferred., • Ability to work in Microsoft Word and with computers/computerized equipment., • Strong problem-solving skills and attention to detail., • Knowledge of advanced imaging and analysis software preferred., • Familiarity with applicable welding codes (e.g., ASME, API, AWS) preferred., • Valid Driver's License and pre-access drug and alcohol testing required., • Pre-employment background checks will be required., • Valid TWIC Card and/or knowledge of PIN of TWIC Card may be required for some sites/locations., • Ability and willingness to travel may be required for some sites/locations, sometimes with short notice., • Ability to work shiftwork may be required for some sites/locations (days, evenings, nights). Work Conditions: • Field duties require indoor and outdoor work in diverse industrial environments with varying climate conditions, • Interaction with other crew employees, as well as supervisors, client personnel and a wide range of stakeholders, • Working in a plant and/or shop area around production machinery with extreme noise levels, • Work from various levels of heights and/or confined spaces for long periods of time, • Wear safety equipment as required by the safety department for personal protection (PPE) Physical and Mental Requirements: • Ability to lift, move, and carry objects weighing 75lbs. or greater, • Must be able to walk, sit, stand, bend, reach, and climb, • Must be able to work in confined spaces and at heights, including climbing tanks, ladders, scaffolding, towers, piping systems, catwalks, structural steel, and wind turbines, • Perform physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking and stooping, • Working extended hours and standing for extended periods of time, • Work in indoor and outdoor environments in conditions of extreme heat and/or cold, • Work in and near industrial hazards, • Must be able to walk and climb except when performing non-field duties, • Remain consistently active throughout shift, • Sufficient clarity of speech and hearing and other communication capabilities, with or without reasonable accommodation, which permits the employee to communicate effectively, • Sufficient vision (close vision and distance vision) or other powers of observation, with or without reasonable accommodation, which permits the employee to investigate, • Sufficient manual dexterity, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties, • Sufficient personal mobility and physical reflexes, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties and travel to off-site locations, • Must be able to wear safety equipment as required by the safety department for personal protection (PPE), • Ability to maintain focus and multitask effectively, • Exhibit sensible and responsible behavior, • Ability to work autonomously or within a team environment Benefits: • Dental Insurance, • Vision Insurance, • Health Insurance, • Paid Time Off, • 401(K) W/Matching, • Flexible Spending Account, • Health Savings Account NOTE: To be considered, applicants must be able to provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification. * Apave America Inc. is an equal opportunity employer that prohibits discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, and other protected characteristics. * We make hiring decisions based solely on qualifications, merit, and business needs. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees.