Manual testing jobs in Arlington, TexasCreate job alerts

CLASS A CDL COMPANY DRIVER- (Full time Employment) Manual Transmission and Must have Boom Experience Enjoy some overnight trips (1-3 a month) Class A $24-$26/hour What Brought You Here • Pay range (Class A $24-$26/hour), • Quarterly safety bonus opportunities, • Shift Days and Hours The position is M-F. Hours vary depending on daily route., • LOCATED at 3101 High River Rd. Fort Worth, TX 76155, • You are someone with previous over the road experience., • Familiar with pre and post trip inspections and using online log systems, • Enjoys some overnight trips (1-3 a month). What You Will Be Doing Successful candidates for the Delivery Driver role are motivated and eager to provide a high level of customer service. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. • Drives truck to destination., • Distributes receipts for load picked up., • Occasionally collects payment for goods delivered and for delivery charges., • Maintains truck log, according to state and federal regulations., • Maintains telephone and/or radio contact with supervisor to receive delivery instructions., • Loads and unloads truck as needed., • Inspects truck equipment and supplies such as tires, lights, brakes, gas, oil, and water., • Positions blocks and ties rope around items to secure cargo during transit. Skills You Bring: • Current and active Class A Driver’s license with good driving record; must pass Driver's Testing and must pass DOT Physical / Drug Testing., • Minimum one year of experience after CDL school., • Boom Truck Experience., • Able to operate manual transmission., • Previous warehouse experience highly preferred, • Proficient in reading and writing English., • Capable of working in a physically demanding work environment which includes bending; stretching; pushing, pulling and lifting a MINIMUM of 75 LBS; and extensive fast-paced walking in all weather conditions throughout the year., • Knowledge of basic math, ability to read and write the English language, and map reading skills'. Why Trulite: Trulite offers the most comprehensive benefit coverage in the industry. We give our employees immediate access to health, dental, vision and life insurance benefits, as well as provide short/long-term disability coverage to protect you financially if you should incur a non-occupational illness or accident. We are pleased to offer a comprehensive wellness initiative that includes access to a progressive financial training program. Stay with us for a year and your 401k employer match is 100% vested and immediately becomes part of your ever improving financial plan. This is also true for those who select and contribute to their Health Savings Account. We match on both employee and family coverage to help cover out-of-pocket expenses and if unused continues to grow until needed. The employer match for your HSA, if you choose to participate, is also vested immediately at 100%, improving your financial health. Trulite bears most of the cost of your benefits. We structured these benefits because we care not only about your physical well-being but your financial health and welfare too. Let us show you why Trulite values you as an employee and how we will help you achieve financial independence. We are an Equal Opportunity Employer. We embrace and encourage our employees’ differences in age, color, disability, ethnicity, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socioeconomic status, veteran status, and other characteristics that make our employees unique.

CLASS B CDL COMPANY DRIVER- (Full time Employment) Manual Transmission required and Boom Experience Preferred Enjoy some overnight trips (1-3 a month) What Brought You Here • Pay range (Class B $23-$25/hour), • Quarterly safety bonus opportunities, • Shift Days and Hours The position is M-F. Hours vary depending on daily route., • LOCATED at 3101 High River Rd. Fort Worth, TX 76155, • You are someone with previous over the road experience., • Familiar with pre and post trip inspections and using online log systems, • Enjoys some overnight trips (1-3 a month). What You Will Be Doing Successful candidates for the Delivery Driver role are motivated and eager to provide a high level of customer service. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. • Drives truck to destination., • Distributes receipts for load picked up., • Occasionally collects payment for goods delivered and for delivery charges., • Maintains truck log, according to state and federal regulations., • Maintains telephone and/or radio contact with supervisor to receive delivery instructions., • Loads and unloads truck as needed., • Inspects truck equipment and supplies such as tires, lights, brakes, gas, oil, and water., • Positions blocks and ties rope around items to secure cargo during transit. Skills You Bring: • Current and active Class B Driver’s license with good driving record; must pass Driver's Testing and must pass DOT Physical / Drug Testing., • Boom Truck Experience Preferred., • Able to operate manual transmission., • Previous warehouse experience highly preferred, • Proficient in reading and writing English., • Capable of working in a physically demanding work environment which includes bending; stretching; pushing, pulling and lifting a MINIMUM of 75 LBS; and extensive fast-paced walking in all weather conditions throughout the year., • Knowledge of basic math, ability to read and write the English language, and map reading skills'. Why Trulite: Trulite offers the most comprehensive benefit coverage in the industry. We give our employees immediate access to health, dental, vision and life insurance benefits, as well as provide short/long-term disability coverage to protect you financially if you should incur a non-occupational illness or accident. We are pleased to offer a comprehensive wellness initiative that includes access to a progressive financial training program. Stay with us for a year and your 401k employer match is 100% vested and immediately becomes part of your ever improving financial plan. This is also true for those who select and contribute to their Health Savings Account. We match on both employee and family coverage to help cover out-of-pocket expenses and if unused continues to grow until needed. The employer match for your HSA, if you choose to participate, is also vested immediately at 100%, improving your financial health. Trulite bears most of the cost of your benefits. We structured these benefits because we care not only about your physical well-being but your financial health and welfare too. Let us show you why Trulite values you as an employee and how we will help you achieve financial independence. We are an Equal Opportunity Employer. We embrace and encourage our employees’ differences in age, color, disability, ethnicity, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socioeconomic status, veteran status, and other characteristics that make our employees unique.

Job Title: Medical Laboratory Scientist Location: Arlington, TX 76011 Duration: 06 Month Contract (Possibility of extension or conversion) Shift: Monday-Thursday, 1:00 pm to 09:30 pm and Friday, 3:00 pm to 11:30 pm Pay Rate: $35 - $40/hour (W2) (Based on experience and education) Position Summary The Medical Laboratory Technologist/Technician performs high-complexity laboratory testing in accordance with established procedures, regulatory requirements, and quality standards. This role is responsible for specimen processing, analysis, reporting of results, quality control, and maintaining compliance with CLIA, HIPAA, OSHA, and laboratory policies. Key Responsibilities • Follow the laboratory's procedures for specimen handling and processing, test analyses, reporting, and maintaining records of patient test results, • Maintain records that demonstrate that proficiency testing samples are tested in the same manner as patient specimens;, • Analyse specimens using approved testing procedures (see department SOPs)., • Review and release test results., • Follow CLIA, HIPAA, OSHA, and safety guidelines as described in their respective guidelines., • Adhere to the laboratory's quality control policies, document all quality control activities, instrument and procedural calibrations, and all maintenance performed;, • Follow the laboratory's established policies and procedures whenever test systems are not within the laboratory's established acceptable levels of performance., • Identify problems that may adversely affect test performance or reporting of test results, correct the problems encountered, or immediately notify the senior technologist or supervisor., • Document all corrective actions taken when test systems deviate from the laboratory's established performance specifications., • Follow the department's procedure in reporting STATS or Critical results to clients., • If applicable, answer questions from customers or other lab personnel., • Maintain complete records of all testing performed on-site., • Maintain the general appearance of the department., • Make sure reagents/test kits have received dates, expiration dates, and if applicable, opened dates. 15. Review/train on new procedures., • Attend monthly department and any additional training/educational meetings., • Participate in all applicable safety training sessions. Know the location and contents of the safety manual. Know the location/use of all applicable safety equipment., • If needed, participate in government or regulatory agency inspections., • Perform other duties as directed by the supervisor. Required Knowledge & Skills • Strong understanding of laboratory testing principles and procedures., • Knowledge of Quality Control (QC) and Quality Assurance (QA)., • Familiarity with all areas of the laboratory., • Proficiency in computer systems and ability to work across multiple platforms., • Ability to prioritize tasks and handle multiple procedures simultaneously., • Strong problem-solving and troubleshooting skills., • Excellent communication and customer service skills., • Strict adherence to patient confidentiality standards. Education Requirements • Bachelor’s degree in medical technology (preferred), OR, • Bachelor’s degree in chemistry or biology, OR, • Associate Degree in Laboratory Science or Medical Technology, OR, • Previously qualified as a Technologist under 42 CFR 493.1433 (March 14, 1990). Additional Requirements: • National certification as MT/MLT from ASCP or AMT (preferred or eligible)., • Foreign-educated candidates must provide a credential evaluation from IERF., • U.S.-educated candidates must provide original transcripts. Work Experience • Minimum 1 year of clinical laboratory experience in high-complexity testing preferred., • For BS/BA in Chemistry or Biology: Minimum 1 year of high-complexity clinical laboratory experience required., • National and State licensure as required. Pride-Health offers eligible employee’s comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance and employee discounts with preferred vendors. Equal Employment Opportunity Pride-Health is an equal opportunity employer. We do not discriminate on the basis of the race, religious creed, color, national origin, ancestry, physical disability, mental disability, reproductive health decision making, medical condition, genetic information, marital status, sex, gender, gender identity, gender expression, age, sexual orientation, veteran or military status, or any other characteristic protected by applicable federal, state, or local law. Fair Chance Employment Pride-Health is a Fair Chance employer. We consider all qualified applicants, including those with criminal histories, in a manner consistent with applicable state and local Fair Chance laws and ordinances, including, the California Fair Chance Act and all applicable local Fair Chance ordinances. Accommodations We are committed to providing reasonable accommodations to applicants and employees with disabilities. If you require a reasonable accommodation to participate in the application or interview process, or to perform the essential functions of this role, please contact us. Only applicable for San Francisco Candidates: Under the San Francisco Lactation in the Workplace Ordinance, we will provide written notice of lactation accommodation rights, and this notice will automatically be given upon hiring, any inquiry of parental leave or lactation accommodation.

Company Overview Medical Center Ophthalmology Associates located in San Antonio Texas offers compassionate care for every eye condition.(MCOA) Board certified physician's offer comprehensive eyecare their team is totally dedicated to help you see better. Position Summary The Clinical Manager provides oversight of the clinical activity within the practice and handles the training of current and new technicians on exam skills, diagnostic equipment, and new clinical procedures and policies. Efficiently directs the workflow of technicians to ensure smooth patient flow. The Clinical Manager provides leadership, has excellent problem-solving skills, and is knowledgeable of applicable laws, regulations, and standards by JCAHPO and other regulatory agencies. Certified Ophthalmic Assistant (COA) minimum is required. Certified Ophthalmic Technician (COT) is preferred. Responsibilities Training: • Develop a scalable training strategy to promote skill and service excellence for ophthalmic technicians, • Implement the full training cycle: analysis, design, development, implementation, and evaluation using educational principles and training methods or activities such as tech-based learning, simulations, mentoring, on-the-job training, and case studies. Ensuring all training adheres to JCAHPO standards., • Complete annual/bi-annual skills competencies for all active ophthalmic technicians, senior technicians, lead technicians, and any other clinical staff roles, • Provide training on all new and current diagnostic equipment, • Organize, schedule, and conduct training curriculum for new hire onboarding, re-training of existing staff, the roll out of new initiatives and the use of technology to support workflow and initiatives, EMR, and practice management systems, • Maintains and updates a library of training curricula and materials, • Provide hands-on, on-the-job training within the clinical setting, • Develop needs-based training goals and objectives, • Assess instructional effectiveness and impact of training on employees, • Aid with patient flow, diagnostic testing, and technician exam components as needed, • Responsible for onboarding of new clinical hires, with focus on skills that may need refining, • Conducts new hire 90 day and annual performance reviews for clinical staff, • Responsible for the disciplinary actions and terminations of employees in conjunction with Human Resources, • Maintain staff training records: audit training records to ensure all evidence of training, certifications, licenses, and credentials are current, • Build a team of trainers and other support staff to support training initiatives, • Certified Ophthalmic Assistant (COA) minimum is required. Certified Ophthalmic Technician (COT) is preferred., • 5 years Ophthalmology experience preferred, • Minimum of 3- 5 years of progressively responsible operations experience in a clinical healthcare environment required, • High School Diploma required, advanced degree preferred, JCAHPO certification required, • Experience conducting or developing training program(s) preferred, • Proven ability to educate and train clinical staff, • Ability to travel via car, plane, or bus as needed, up to 50% of the time Company Benefits We offer a competitive benefits package to our employees: • Medical, • Dental, • Vision, • 401k w/ Match, • HSA/FSA, • Telemedicine, • Employee Discounts and Perks, • Employee Assistance Program, • Group Life/AD&D, • Short Term Disability Insurance

Job Description Bosch Building Technologies – BIM Specialist About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: This position will require the BIM Specialist to perform BIM modeling and coordination tasks daily, while concurrently assisting to develop the Revit standards, families, project templates, workflows, and procedures within Bosch Building Technologies. In addition to 3D BIM work, the BIM Specialist II is also expected to assist where needed with traditional 2D CAD work. The BIM Specialist II will work to support corporate objectives by maintaining the highest quality of service to the requestor, whether an internal Bosch Building Technologies employee or an external customer. Responsibilities: • Working in both 2D and 3D drafting programs, including but not limited to AutoCAD, REVIT, BIM360, and Navisworks, develop detailed models and subsequent drawings needed for the generation of Structured Cabling Systems, Outside Plant Infrastructure, Audio Visual Systems, Security Systems, DAS, and other technologies or low voltage disciplines., • Assist the Director of Design and VDC Manager to develop and maintain BIM/ AutoCAD standards and processes as well as libraries and templates., • Make recommendations to the Director of Design and VDC Manager related to the development of the Bosch BIM/ AutoCAD program to include software, training, and hardware recommendations., • Provide 3D Renderings of Conference Rooms, Data Centers, and IDF/MDF rooms for customer proposal packages, utilizing assets provided by the project Architect or design team., • Develop the BIM Specialist II’s individual knowledge base of not just BIM, but also of the various technologies and systems that Bosch Building Technologies installs for their clients., • Attend BIM coordination meetings and work with architectural firms, real estate developers, MEP consultants, and other trade’s modelers using guidelines provided by the project design team or designated design managers. Be a project partner and an ambassador of Bosch Building Technologies and provide clear communications and support when addressing clash resolutions within the various project models., • Identification, review, and understanding of every project’s specific Design Intent, BIM Execution Plan, and/or Project Execution Plan is vital to the success of the BIM Specialist II., • Perform Electronic Takeoffs as required using Autodesk applications or Bluebeam Revu., • Excellent communication skills (both written and verbal) are required as well as the necessary range of soft skills. Additional qualities needed include: approachability, personal skills, team-working ability, adaptability, creative thinking, problem solving, the ability to remain calm under pressure, and possess a willingness to teach others within the design group when those opportunities present themselves., • Develop and maintain individual skillsets related to AutoCAD, Revit, BIM360, ACC, Navisworks, Microsoft Office Suite,and Bluebeam Revu., • Perform other miscellaneous design, drafting, modeling or office tasks as directed by the Design Manager. The BIM Specialist II is expected to assist the overall design group’s efforts when requested to conduct work outside of their direct modeling work., • Ensure the timely and complete submittal of each drawing set in accordance with the BIM Execution Plan and Design Schedule for each project assigned. Understand all due dates and the remaining work required to meet the next deadline and reach out to a Paladin teammate for support when needed to meet the expected deliverables., • A minimum of 3-5 years of drafting and design experience in the information technology, instrumentation and controls, electronics, and/or security industries, • Post secondary education from an accredited college, university or technical institution in Electronics, Information Technology or related field, • Ability to create aesthetically pleasing, legible, and accessible drawings., • Experience with the following technologies is required:, • AutoCAD, Revit, Bluebeam Revu, IP networks, low voltage electronics, power and communications, Windows desktop operating system, Microsoft Office, • A strong understanding of the physical security and/or technology industries, including an awareness of complimentary products, technologies, trends, and the general application of physical security technology, • An understanding of and experience with fundamental concepts pertaining to IP networks, low voltage electronics, power, and communications, • A strong command of the English language supported by excellent written and verbal communication skills, • The ability to simultaneously handle multiple tasks and projects and be responsive to changing priorities in a fast-paced environment, • Highly developed analytical and problem solving skills, • Experience with the following technologies is an asset:, • Access Control, CCTV (IP and Analog), Intrusion Systems, Client-Server security applications, MS SQL databases, Servers and Storage Arrays, or Microsoft Visio, • Compensation: $28.00 - $35.00/hour (DOE), • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Travel Requirements: N/A, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description Position Locations May Vary: Arlington (South Cooper), Alliance, Bedford, Irving, Mansfield, Arlington, Weatherford, Southwest Fort Worth Under general supervision and according to established policies and procedures, the Patient Access Representative will be responsible for day-to-day administrative functions in support of efficient and effective patient care including patient registration, insurance verification, scanning, faxing, calculation, collection and reconciliation of copayments/co-insurance and scheduling of diagnostic and follow-up appointments. Individual will practice exceptional customer service and answer incoming telephone calls. Communicates and coordinates information in a knowledgeable and courteous manner with staff, patients and families. Maintains confidentiality with patients, staff and guests. Essential Job Responsibilities: · Greets all patients/clients/visitors in a pleasant and professional manner, determining the purpose of the visit and directing them to appropriate person or department(s). · Enters patient demographics and secures and scans copy of insurance card(s) and driver’s license. Provides assistance and direction to patients as needed with the completion of necessary forms. · Confirms insurance eligibility and referral requirements and secures signatures on required forms, including but not limited to, Financial Policy, Consent for Treatment, HIPAA, etc. · Ensures that all required referrals are secured and attached to the applicable appointment in the Practice Management system. · Scans and indexes patient documents. · Informs patients of clinic delays and maintains communication with the clinical area to facilitate appropriate clinic flow. · Schedules appointments and additional diagnostic testing and consultations as directed by the provider and relays corresponding instructions to the patient. · Explains financial requirements to the patients or responsible parties and collects copays, copayments and balances due as required. · Promptly and professionally answers telephone calls. Routes calls and messages appropriately, offering voice mail, paging, or redirection of calls as needed. · Facilitates patient flow and communicates delays with patients and clinical staff. · Conduct pre-visit chart preparation, precertification and fax duties as assigned. · Follows all clinic policies on safety and security; maintains restricted areas by safeguarding keyless entry codes and computer system passwords in strict confidentiality. · Appropriately and courteously screens solicitors for relevance to organization needs. · Responsible for keeping the reception and patient waiting areas clean and organized. · Monitors medical office supplies and inventory needs and oversees and maintains office equipment. · Assists with training activities as needed. · Maintains accuracy and productivity levels as established by department standards. · Performs, organizes and streamlines operational tasks to reduce the potential for errors. · Maintains patient safety and confidentiality at all times. · Travels as required. · All other duties as assigned by Practice Administrator or department supervisor. WORK EXPERIENCE · Minimum 1-3 years of relevant medical office experience preferred. Preference given to those with Urology experience. Skills · Standard operation of office equipment including computers, fax machines, copiers, printers, telephones, etc… · Ability to work in a fast-paced environment and provide exceptional customer service and phone etiquette. · Ability to maintain effective and organized systems to ensure timely patient flow. · Working knowledge of medical terminology, CPT-9 and ICD-10 coding and familiarity proficiency in insurance knowledge including verifications. · Computer proficiency and prior experience with Electronic Medical Records preferred. PHYSICAL REQUIREMENTS Computer entry requiring dexterity. · Adequate physical ability including bending and lifting up to 50 pounds and sufficient manual dexterity to perform the requisite healthcare services. Education · High school diploma or GED; some college preferred.

Job DescriptionQuality Technician w/Soldering???? Fort Worth, TX 76177 ???? Pay Rate: $17.00/hour ???? Full-Time | Monday–Friday | 8:00 AM – 4:30 PM Position Summary:Perform high level possibly complex operations such as inspection, assembly, disassembly, packaging and testing for mobile phones and/or similar electronic products. Position will also involve quality inspection pc boards and other components along with quality of soldering at the board level. Appropriately handle material supply and scrap coordination and other tasks assigned to meet production targets (quality, quantity and time). Required Qualifications: • High School Diploma/GED equivalent and a minimum of 2 years working as a Production Operator Level II or equivalent experience., • Soldering Experience Required, • Electronics Quality Control Experience Required, • Ability to read, write and communicate in English., • Ability to read and understand Work Instruction and perform tasks as written., • Ability to properly handle and control materials., • Ability to sit or stand for long period of time. Culture Our staffing professionals are committed to meeting your individual needs and exceeding your expectations. Experienced top-quality candidates are the result of our extensive screening process, in-depth evaluations, industry-specific testing, and reference checking. Responsibilities Essential Duties and Responsibilities: • Perform repairs, assembly, dis-assembly and re-assembly of components using manual or mechanical tools per Work Instruction., • Understand the Production Flow process and the job responsibilities of the area, • Use designated tools to protect the product from scratches, drops and other issues related to proper handling of the unit., • Ensure Work Instructions are followed for appropriate processing and provide input for optimization/improvements as necessary., • Receive, verify, inspect and control both compliant and non-compliant materials where applicable., • Follow quality standards defined in the work instruction., • Report immediately to Line Leader any incident that make put at risk product targets, quality of the product or employee safety or work labor environment., • Receive, control and store material (material kit for the Line or shipping) maintaining the proper inventory levels., • Work with scrap control and proper disposition., • Verify that any rejected unit is properly identified and taken to designated area ensuring that quantity, failed code and type of failure is clearly identified., • Inspect equipment and tools to identify any replacements, malfunctions and/or repairs and escalate to leaders for correction. This will include the quality of soldered components., • Ensure materials and equipment assigned are safeguarded and preserved/protected at all times., • Follow ESD required practices for testing and utilization of ESD straps and possibly protective clothing where applicable,, • Use designated tools to perform the job and escalate to a leader when help is required, to eliminate the possibility of workmanship errors., • Comply with the Quality, Environmental, Safety and Occupational Health Management Systems and regulations., • Maintain a clean, safe and organized work area daily, according to 5S standards., • Comply with the annual mandatory training plan. Requisition #cmkeh144m2eop0iqygyt6v58a

Job Description Perform high level possibly complex operations such as inspection, assembly, disassembly, packaging and testing for mobile phones and/or similar electronic products. Culture Our staffing professionals are committed to meeting your individual needs and exceeding your expectations. Experienced top-quality candidates are the result of our extensive screening process, in-depth evaluations, industry-specific testing, and reference checking. Responsibilities Essential Duties and Responsibilities: • Perform repairs, assembly, dis-assembly and re-assembly of components using manual or mechanical tools per Work Instruction., • Understand the Production Flow process and the job responsibilities of the area, • Use designated tools to protect the product from scratches, drops and other issues related to proper handling of the unit., • Ensure Work Instructions are followed for appropriate processing and provide input for optimization/improvements as necessary., • Receive, verify, inspect and control both compliant and non-compliant materials where applicable., • Follow quality standards defined in the work instruction., • Report immediately to Line Leader any incident that make put at risk product targets, quality of the product or employee safety or work labor environment., • Receive, control and store material (material kit for the Line or shipping) maintaining the proper inventory levels., • Work with scrap control and proper disposition., • Verify that any rejected unit is properly identified and taken to designated area ensuring that quantity, failed code and type of failure is clearly identified., • Inspect equipment and tools to identify any replacements, malfunctions and/or repairs and escalate to leaders for correction. This will include the quality of soldered components., • Ensure materials and equipment assigned are safeguarded and preserved/protected at all times., • Use designated tools to perform the job and escalate to a leader when help is required, to eliminate the possibility of workmanship errors., • Comply with the Quality, Environmental, Safety and Occupational Health Management Systems and regulations., • Maintain a clean, safe and organized work area daily, according to 5S standards., • Comply with the annual mandatory training plan. Requisition #cmon9n1yfpq8y0jlch0fbgp95

Job DescriptionREPAIR SPECIALIST???? Fort Worth, TX 76177 ???? Pay Rate: $17.00/hour ???? Full-Time | Monday–Friday | 8:00 AM – 4:30 PM Position OverviewWe are seeking a Repair Specialist to perform inspection, repair, assembly, disassembly, testing, and packaging of mobile phones and similar electronic devices. This role supports production goals related to quality, quality, and turnaround time in a fast-paced production environment. Required Qualifications • High School Diploma or GED, • 1–2 years of electronic repair experience (phones, computers, or similar devices), • Experience with assembly, disassembly, and testing, • Ability to identify electronic components and cosmetic/functional defects, • Experience using hand and power tools (electric/manual screwdrivers, suction cups, etc.), • Strong attention to detail and troubleshooting skills, • Basic computer skills (MS Office), • Ability to read, write, and understand English, • Ability to work independently with minimal supervision, • Familiarity with production environments and 5S standardsPhysical Requirements, • Ability to stand for 8+ hours per shift, • Frequent bending, squatting, and reaching, • Strong fine motor and hand-eye coordination Culture Our staffing professionals are committed to meeting your individual needs and exceeding your expectations. Experienced top-quality candidates are the result of our extensive screening process, in-depth evaluations, industry-specific testing, and reference checking. Responsibilities Key Responsibilities • Repair, assemble, and reassemble electronic devices using manual and mechanical tools, • Perform required functional and cosmetic testing, • Follow work instructions and ESD safety procedures, • Identify, document, and segregate non-conforming or failed units, • Support scrap control and proper material disposition, • Set up and organize materials at the beginning and end of each shift, • Maintain clean, safe, and organized workstations (5S standards), • Meet production yield and quality targets, • Report safety, quality, or equipment issues immediately, • Assist with continuous process improvement Requisition #cmke9slxj2cwo0iqy999e6ile

Job DescriptionREPAIR SPECIALIST???? Fort Worth, TX 76177 ???? Pay Rate: $17.00/hour ???? Full-Time | Monday–Friday | 8:00 AM – 4:30 PM Position OverviewWe are seeking a Repair Specialist to perform inspection, repair, assembly, disassembly, testing, and packaging of mobile phones and similar electronic devices. This role supports production goals related to quality, quality, and turnaround time in a fast-paced production environment. Required Qualifications • High School Diploma or GED, • 1–2 years of electronic repair experience (phones, computers, or similar devices), • Experience with assembly, disassembly, and testing, • Ability to identify electronic components and cosmetic/functional defects, • Experience using hand and power tools (electric/manual screwdrivers, suction cups, etc.), • Strong attention to detail and troubleshooting skills, • Basic computer skills (MS Office), • Ability to read, write, and understand English, • Ability to work independently with minimal supervision, • Familiarity with production environments and 5S standardsPhysical Requirements, • Ability to stand for 8+ hours per shift, • Frequent bending, squatting, and reaching, • Strong fine motor and hand-eye coordination Culture Our staffing professionals are committed to meeting your individual needs and exceeding your expectations. Experienced top-quality candidates are the result of our extensive screening process, in-depth evaluations, industry-specific testing, and reference checking. Responsibilities Key Responsibilities • Repair, assemble, and reassemble electronic devices using manual and mechanical tools, • Perform required functional and cosmetic testing, • Follow work instructions and ESD safety procedures, • Identify, document, and segregate non-conforming or failed units, • Support scrap control and proper material disposition, • Set up and organize materials at the beginning and end of each shift, • Maintain clean, safe, and organized workstations (5S standards), • Meet production yield and quality targets, • Report safety, quality, or equipment issues immediately, • Assist with continuous process improvement Requisition #cmke9slxj2cwo0iqy999e6ile

Job DescriptionJob Title: Cable Assembler Solder Tech Hours: Monday - Friday 8:00am - 4:30pm or until finished including weekends when needed. Location: Dallas, TX 75211. I30 Between Westmoreland and Cockrell Hill. Pay: $18/hr * Primary responsibility is build, assemble and repair Audio & Visual cables. You must have experience building and soldering wiring harnesses and reading cable diagrams. Additional responsibilities may include PCB Soldering.* Culture Our staffing professionals are committed to meeting your individual needs and exceeding your expectations. Experienced top-quality candidates are the result of our extensive screening process, in-depth evaluations, industry-specific testing, and reference checking. Responsibilities • The Cable Assembler performs a variety of manufacturing and repair related tasks and processes in the design and repair cable and harness assemblies., • Must be able to obtain measurements from tools such as measuring tapes, scales., • Must have experience with and an ability to read wire tables and wire routing, wire diagrams, blueprints, schematics, color codes, measurements, mathematics, and both power and manual cable building tools., • Requires the ability to use pinning and stripping tools, make all types of connections, identify breakout positions, sleeve types, and braid requirements., • Ability to solder very small wire to terminals, connectors, and braid., • Familiar with and capable of conducting continuity and resistance testing, (C&R), • Additional responsibilities may include repair of LED PCB's., • Understanding of and demonstrated experience with IPC 620 Workmanship and Acceptability Criteria is a plus., • Perform a variety of tasks ranging from repetitive to non-repetitive production cable assemblies., • Well organized, ability to work alone, and basic computer skills are helpful., • Able to work in a production environment and maintain exceptional work quality. Requisition #cmblczk4w3xr70jo5sgmvh1sb

Job Description Employment Type: Full-Time Hours: Monday-Friday 6:00 AM-2:30 PM 1st Shift Monday-Friday 2:00 PM-10:30 PM- 2nd Shift Sunday-Thursday 10:00 PM-6:30 AM 3rd Shift Why Work Here? “We offer a wide range of job profiles and we give our employees early responsibility and equip them with specialist skills.” JOB TITLE: Setter GENERAL DESCRIPTION: Set up machines per specified requirements to assure quality standards and parameters of the manufacturing orders are met. Participate in continuous improvement and safety. Coilers/wire formers (CNC programming) for existing parts. Ensure all machines / operations are running smoothly, promptly and at highest quality standards. They are ensuring the efficient running of equipment and contribute to the production process. Set up machines per specified requirements to assure quality standards and parameters of the manufacturing order are met. JOB RESPONSIBILITIES (Include but are not limited to): • Set up wire coiling machine / change wire, • Responsible for accuracy of all transactions within the department, • Machine and support equipment preparation. Assure the machine is cleaned, properly lubricated and prepared before each set up., • Minimize downtime through tooling preparation and requisition of materials prior to machine availability for set up, • Implement the control plan for the production process (i.e. load testing, dimentionals), • Ensure the equipment is serviced as required before the operation, • Perform set ups of machines per specified instructions. Make necessary allowances for heat treating / stress relieve operation when applicable., • Basic spring calculation, • Creation of set up card for new items. Review and revision of set up cards for revision of existing items, • Perform Machine preventive maintenance, • Maintain equipment to assure it is operated according to equipment specifications and safety standards., • Inspection and SPC control per QSYS /control plan instructions. Make adjustments when necessary., • Assure proper monitoring of the production to assure quality parameters are met. Make adjustments when necessary., • Assure machine is set up and monitored to maintain the proper run speed and scrap rate, • CNC programing for existing parts, • Thorough knowledge of assigned inspection equipment. Assure proper set up and use of machines., • Identification and traceability of product, • Maintain proper containment and reaction activities (i.e., proper segregation by manufacturing order), • Keep work area clean, orderly and safe, • Know the production process, safety and procedure of the BST Quality Manual, • Follow established work instruction designated by the supervisor, • Use safety equipment and eliminate unsafe conditions, • Maintain integrity of tooling. Tooling must be maintained and stored per procedures., • Monitor tooling inventory. Replacement tooling must be ordered when it meets or dips below the minimum stock level as required, • Set up and operate auxiliary equipment related to the production machine., • Direct activities of Operators and Packers to assure machines are running to specified standards (quality, speed & scrap), • Support Operators and Packers to assure they have the tools, equipment, and documentation needed to perform their duties, • Attend production meetings and communicate needs to all employees in the department, • Responsible for cleanliness and organization of the department, • Identify and introduce 5S / process improvements as required KNOWLEDGE, SKILLS and ABILITIES: • High School Diploma or GED (preferred) or equivalent of 2 years’ experience, • Ability to comply with responsibilities in accordance with the organization’s policies and applicable laws, • Ability to lift up to 50 pounds, • Knowledge and ability of proper Quality procedures in accordance with shipping, • Knowledge and ability in proper inventory control and maintenance, • Knowledge and ability to maintain proper safety in the area including maintenance of equipment, • Read and understand manufacturing order with its specifications, • Read, understand and implement the instructions on the production orders/routings, • SPC Basics, • Preventive machine maintenance At Baumann Group, we celebrate diversity and are committed to creating an inclusive environment for all employees. We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.The BAUMANN Group has been a symbol of Swiss precision and quality for more than 130 years. We invite you to benefit from our experience as one of the world's leading manufacturers of springs and stampings. The group has eleven production sites around the globe, where more than 1,600 people design and produce technically sophisticated products for selected industries, including the automotive, electrical engineering and medical technology sectors. Learn more about BAUMANN visiting our homepage: Baumann Group, we celebrate diversity and are committed to creating an inclusive environment for all employees. We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

Job Description Job Summary: The Maintenance Supervisor will understand maintenance and repairs for assigned equipment and facilities including plumbing, electrical, basic carpentry, heating and cooling, and other building systems. They will be responsible for the team ensuring that all members are trained properly and follow through with the process that is in place in the maintenance department. Build a culture of trust and unity. Will be responsible for following the UAW CBA, and Acciona Employee handbook processes and policies. Ensuring that that maintenance department communicates clearly and promptly with client. Supervisor Duties/Responsibilities: · Ensures, Inspects and identifies equipment, areas of facility, or machines in need of repair. · Supports team in troubleshooting issues to determine necessary repairs. · Ensures repair work using building’s blueprints or equipment manual as needed and completed · Updates tickets and audits completed work as needed. · Ensure that if specialized technician is required that it is approved, sourced and completed in a timely manner with updates to manager and client. Examples may include repairing HVAC, dock doors, plumbing, special fixtures or equipment. · Ensure maintenance is proactive and not reactive with routine maintenance inspections on building systems. · Ensures clear communication with team members. · Weekly safety and team meetings · Ensures that discipline is timely and CBA is followed · Approves time for team members in DayForce · Orders supplies and materials needed for repairs and maintenance following appropriate process. · Performs other related duties as assigned. Safety, Compliance & Standards • Ensure maintenance activities comply with OSHA, EPA, and company safety policies., • Promote safe work practices and ensure technicians follow established safety procedures and lockout/tagout requirements., • Maintain accurate maintenance, inspection, and compliance records. · Ability to follow instructions from Management or senior leadership. · Knowledge of HVAC, plumbing and general repairs. · Ability to use hand tools and power tools. · Excellent organizational and time management skills. · Computer skills · Strong communication skills Education and Experience: · High school diploma or equivalent required. · Certification in HVAC, plumbing or general maintenance · 3+ years' experience preferred. Key Competencies • Leadership and supervision in a union environment, • Safety awareness and accountability, • Clear communication and collaboration, • Problem-solving and decision-making, • Ability to work in a manufacturing, warehouse, and outdoor environment., • Ability to stand, walk, bend, squat, climb, and move throughout the facility to perform essential job functions., • Ability to lift, carry, push, or pull up to 50 pounds, with or without reasonable accommodation., • Ability to safely operate company vehicles, forklifts, and golf carts as required., • Must possess and maintain a valid driver’s license., • Must be able to successfully pass pre-employment and ongoing background checks and drug testing in accordance with company policy and applicable laws. ADA / Reasonable Accommodation Statement The essential functions of this position may be performed with or without reasonable accommodation. The company is committed to providing reasonable accommodations in accordance with the Americans with Disabilities Act (ADA) and applicable laws Company DescriptionBUSINESS AS UNUSUAL We are a global group that develops and manages sustainable infrastructure solutions, especially in renewable energy. Our business spans the entire value chain, from design and construction through to operation and maintenance. Our goal is to lead the transition towards a low-carbon economy, bringing technical excellence and innovation to all of our projects to design a better planet. We are committed to contributing to the economic and social development of the communities in which we operate. At ACCIONA we are championing a different way of doing business that promotes the welfare of society and the planet, going beyond economic interests. We invest in sustainable projects that make the world a better place. We have won Best Place to work and Top Employer. Investing in the planet is the smart choice. Investing in our people is important.BUSINESS AS UNUSUAL\r\nWe are a global group that develops and manages sustainable infrastructure solutions, especially in renewable energy. Our business spans the entire value chain, from design and construction through to operation and maintenance.\r\n\r\nOur goal is to lead the transition towards a low-carbon economy, bringing technical excellence and innovation to all of our projects to design a better planet. We are committed to contributing to the economic and social development of the communities in which we operate.\r\n\r\nAt ACCIONA we are championing a different way of doing business that promotes the welfare of society and the planet, going beyond economic interests. We invest in sustainable projects that make the world a better place. We have won Best Place to work and Top Employer. \r\n\r\nInvesting in the planet is the smart choice. Investing in our people is important.

Job Description JOB DESCRIPTION - DALLAS TRAILER REPAIR CO. MOBILE TRAILER TECHNICIAN Apply on Indeed or Job Summary This position is responsible for safely operating a mobile repair vehicle for the routine maintenance, diagnostics and repair on all trailers and related equipment. To succeed in this role, one should have a solid knowledge of basic mechanic’s tools, service, and diagnostic equipment, as well as strong attention to detail, excellent communication, and customer service skills, and be able to work independently or as a team member. Key Responsibilities • Aptitude in using various hand tools, power tools and precision measurement tools (e.g., calipers), • Maintains, diagnoses, and repairs a variety of equipment including; electrical systems, air systems, • Execute required procedures for preventative maintenance inspections., • Perform inspections required by the company., • Perform basic troubleshooting with electrical, mechanical, hydraulic, and pneumatic systems., • Read and follow the repair manual., • Perform repairs as listed in manuals, • Operate and maintain power equipment., • Order parts as necessary for equipment with prior approval., • Install and/or replace new or reconditioned repair parts., • Basic testing of equipment for proper operation., • Complete proper paperwork as assigned., • May be required to assist other maintenance employees., • Problem solve and document an action plan for all repairs and follow checklists and protocols while conducting repairs., • Ensure a safe, organized, and tidy workspace, including regularly cleaning and maintaining tools and equipment., • Cleaning and upkeep of the shop is necessary, which will include sweeping, cleaning, and trash removal, • Follow all health and safety rules and guidelines, as well as common sense safety practices., • Ability to work independently, as well as support coworkers, able to work as part of team and work well with co-workers., • Possess a valid driver’s license and a clear Motor Vehicle Report to our Driver Fleet Policy., • Must be “insurable” according DTR’s insurance company’s requirements (acceptable driving record, age min/max requirements), • Must be able to read and write in English, in order to follow local, state, and federal driving laws and signs and as required for documentation of diagnosis and solutions., • Experience: 1–2 years of mechanical or equivalent experience., • Certifications: ASE certifications highly desired but not required., • Must pass pre-employment knowledge/skill test, background check (10-year), and drug/medical physical exam., • Proven mechanical aptitude and basic math skills., • Ability to read and write in English for documentation and communication., • Heavy Work: Exert up to 100 lbs occasionally, 50 lbs frequently, and 20 lbs constantly., • Frequent activities: Walking, standing, climbing, stooping, crouching, balancing, kneeling, and crawling., • Manual dexterity: Frequent use of hands and fingers for grasping, typing, and operating tools. Work is performed primarily in a shop setting — both indoors and outdoors. Conditions may include exposure to: • Non-climate-controlled environments / Hot/cold temperature changes, • Dirt, dust, soot, fumes, and other airborne particles, • Moving mechanical parts and electrical equipment, • Chemicals and limited ventilation, • High places, confined spaces, and loud noise Flat Rate: $25 – $30 (depending on experience and location) Comprehensive Benefits Package Includes: • Medical, Dental, and Vision Insurance, • 401(k) Plan with Company Matching, • Paid Time Off, • Holiday Pay, • Training & Development Program, • Monthly Productivity/Bonus Incentive Program(s)

Job DescriptionDescription: Job Description The individual will be doing hands-on repair, assembly, soldering, or re-manufacture of mechanical and electromechanical components utilizing company provided approved data. The technician will be responsible for testing, troubleshooting, and repairing electrical, electromechanical, and machined assemblies sent in for repair evaluation by our customers. Training, technical documents, and oversight are provided by PG Aerotech management. Essential Responsibilities • Test and repair aircraft components in accordance with company provided data (manuals, drawings, procedures, etc.) and company provided training., • Maintain a clean, clutter-free work area., • Correctly, concisely, and legibly fill out all company forms and reports as required by management (both written and online)., • Work with co-workers to achieve goals and objectives set by management., • Work with management to develop new processes and procedures as necessary., • Assist in basic shop upkeep and maintenance including routine cleaning of the technician’s work area and periodic shop maintenance assignments., • The ability to pass a pre-employment and random drug and alcohol screenings as well as a basic background check., • 2 or more years of similar or related work experience; similar experience in aviation, automotive, marine, electronics, or low-voltage electric repair will be considered., • Technician candidate must own his or her own set of basic hand tools., • Applicant must have at the least a moderate level of experience and proficiency with general electrical soldering and/or circuit board level soldering., • The ability to follow instructions and work to a written procedure concisely and accurately., • Must be fluent in speaking, reading and writing English., • Applicants must be able to read and thoroughly understand technical drawings, blueprints, manuals, and instructions. A pre-employment technical skills and comprehension test may be required., • Interested individuals must be detail-oriented, self-motivated, and highly organized., • Experience using a computer., • Punctual and reliable., • Valid driver’s license., • The ability to lift up to 20 lbs., • Manual dexterity (must be able to hold certain components with one hand while moving tools around with the other), • Constant hand manipulation of small to medium, • Sitting or standing for long periods of time, • Frequent use of hand tools and other repair equipment, • High school diploma or GED is required., • Associates degree or higher in a related technical field preferred., • Trade schooling or related industry experience required., • Hourly position commensurate with experience and skill level and/or certifications. ($24 - $32) Airline Component Parts (ACP) is an equal opportunity employer. Visit our website at Airline Component Parts | Jet Parts Engineering Requirements:

Job Description Bosch Building Technologies – Systems Engineer I About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: This position is responsible for integrated security system design and review of system functionality to determine proper operation of access control, IP video and other security systems and controls. Responsibilities: • Prepare drawings and wiring diagrams, based upon project plans and specifications, showing locations of devices, equipment, and wiring etc. for low voltage electrical projects., • Develops functional design, construction drawings, relay settings, and equipment specifications for protection, control, and communications equipment., • Preparing electrical construction documents for both building renovations and new construction projects., • Designing and applying low voltage systems, including security networks, IP Video, mass notification, and security systems., • Responsible for all aspects of low voltage design within designated projects., • Conducts surveys to gather field data; prepares drawings, layouts, and other visual aids; prepares technical construction drawings. Reviews the development of designs for compliance with applicable codes, adopted engineering standards, and good engineering practices., • Deliver technical presentations to internal and external audiences as required as part of the design process., • Work in a close team environment with Sales, Project Management, and Installation Departments, • Work with CAD Drafters to produce installation and drawing packages., • Engineering sales support and review of the functionality and design of systems being proposed by account managers., • Set-up and test new products and design concepts such as network devices, custom designed systems, etc., • High School diploma or equivalent, • Technical 2 year degree or better and/or 1-3 years of security industry design experience, • 1 or more years experience engineering low voltage systems, preferably experience with AV, DAS and/or Structured Cabling as well., • Certification in 2 Access Control platforms or equivalent documented experience, • Certification in 2 Video Management platforms or equivalent documented experience, • Certification in 1 Intrusion platform or equivalent documented experience, • Knowledge of NEC Code and low voltage systems, • Proficiency with Microsoft Office and computerized business systems, • Certification in Networking and/or SQL. In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Travel Requirements: No travel required, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description Job Summary We are seeking a detail-oriented and results-driven Night time Quality Inspector to ensure that all products meet established quality standards throughout the production process. This role is responsible for inspecting materials, monitoring production activities, performing testing, and reporting findings to management. The ideal candidate has a strong attention to detail and a commitment to safety and compliance, including AS9100 standards. Key Responsibilities • Interpret blueprints, specifications, and work instructions to understand product quality requirements, • Inspect and approve or reject raw materials based on quality standards, • Perform in-process and final inspections, evaluating fit, form, and function, • Conduct testing using manual and automated systems, • Monitor production processes to ensure efficiency, safety, and compliance with AS9100 requirements, • Maintain accurate quality records, including test results, audit findings, and defect tracking, • Prepare and submit inspection reports to the Quality Manager Physical Requirements • Ability to stand for extended periods of time, • Ability to lift up to 40 lbs, • Must wear required personal protective equipment (PPE) at all times Qualifications • Strong attention to detail with a results-driven mindset, • Reliable, responsible, and able to work independently, • Working knowledge of Microsoft Office (Excel, Word, etc.), • High School Diploma or equivalent required, • Additional certifications or quality-related training are a plus Company DescriptionJayco Manufacturing Website: Manufacturing\r\nWebsite:

Job Description Bosch Building Technologies – System Designer II About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: The System Designer II will be required to provide design, engineering, modeling, drafting, and budgeting support for projects throughout the organization, across all North American Geographies. Additionally, they will assist the Design Group Leadership and Colleagues in continuing to build our company design standards, templates, blocks, families, details, and processes. Responsibilities: • Coordinate and interact with customers (end users, architects, construction managers, general contractors, electrical engineers, and others) to understand their needs and then perform detailed designs Low Voltage technology systems such as Cabling, Security, Audio Visual and DAS., • A Systems Designer may specialize in one Low Voltage Trade, but all Systems Designers are expected to pursue cross training across disciplines., • Attend and host meetings independently on behalf of Bosch. Take and distribute accurate and timely notes to the team, follow up with action items assigned and communicate company commitments., • Coordinate and interact with estimators and engineers throughout the organization, including all geographies across North America, to develop project budgets, technical design requirements and scopes of work related to the design of all sub-disciplines of Low Voltage Technology Systems., • Coordinate and interact with the Sales team and other Project Sponsors to understand the needs and expectations of the client and project and to ensure the best possible client experience., • Prepare detailed and accurate budgets, utilizing technical estimating resources where necessary for medium size projects., • Perform electronic takeoffs using Bluebeam software as directed., • Manage the Designers assigned projects to include billing, cash flow, cost projections and schedule management., • Create technology systems flow line diagrams., • Develop Security riser diagrams, door details, and mounting diagrams., • Develop network diagrams., • Perform the Designer’s own drafting and modeling using Autodesk CAD and Revit software as needed and as practical., • Coordinate and collaborate closely with Bosch’s Drafters and BIM Modelers to provide clear CAD requests, feedback, and guidance for Drafting and modeling work related to the Designers projects that will be performed by the VDC team., • Provide supplemental Peer Reviews of designs and documentation prepared by others throughout the organization as directed., • Participate in both internal and external kickoff meetings as needed to support a smooth transition and exchange of information as a project passes from the design to the build phase., • Perform construction administration on design projects as assigned., • Provide advice, assistance and support to estimators, engineers, project managers and other Bosch employees when requested., • Provide support for existing or potential customers with the utmost professionalism at all times whether on the phone, in writing (email or text/direct message) or in person., • Effectively and professionally manage multiple communications platforms (email, collaboration/messaging (MS Teams), • Increase AV & Security Systems knowledge periodically throughout the year., • Increase Networking knowledge periodically throughout the year., • Maintain and increase industry recognized certifications like CTS, CSPM, etc., • Maintain and stay current with Voice/Data Cabling Systems knowledge periodically throughout the year., • Increase and maintain knowledge of current product offerings for Video Management Systems, Audio/Visual control and distribution systems, cameras, access control management platforms, and other low voltage technology components., • 3+ years of design experience, • 3+ year of experience in the low voltage or technology industry, primarily structured cabling, • Competency in various software platforms typical in the design industry, including (but not limited to): AutoCAD, Revit, MS Office Suite (Word, Excel, Outlook) MS Teams, MS Projects, etc., • Compensation: $91,000 - $122,000 (DOE), • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Travel Requirements: N/A This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. THE ROLE: The Information Systems Security Manager (ISSM) serves as the primary authority responsible for the cybersecurity posture and compliance of all classified information systems operating within a Top Secret possessing facility under a Department of Defense (DoD) Facility Clearance (FCL). This role is pivotal in ensuring the organization meets all requirements set forth by the National Industrial Security Program Operating Manual (NISPOM), the Defense Counterintelligence and Security Agency (DCSA), and applicable Intelligence Community Directives (ICDs). The ISSM will serve as the authoritative point of contact to the Cognizant Security Authority (CSA) and Government Contracting Activity (GCA) for all matters relating to the authorization, operation, and continuous monitoring of classified information systems, including Sensitive Compartmented Information (SCI) systems where applicable What You'll Do: System Authorization & Accreditation (A&A / RMF) • Lead the Assessment and Authorization (A&A) process for all classified IS under the Risk Management Framework (RMF) in accordance with NIST SP 800-37 and DAAPM., • Prepare, maintain, and submit System Security Plans (SSPs), Security Assessment Reports (SARs), Plans of Action and Milestones (POA&Ms), and Authorization to Operate (ATO) packages., • Serve as the primary liaison with DCSA and Government customer representatives during system assessments, inspections, and audits., • Maintain and manage the System Security Authorization Agreement (SSAA) or equivalent documentation for all IS operating at the TS level or above. Compliance & Policy Management • Ensure all classified information systems comply with 32 CFR Part 117 (NISPOM), applicable DoD and IC cybersecurity policies, Contract Data Requirements List (CDRLs), and Statement of Work (SOW) security requirements., • Develop, implement, and maintain facility-level Information Systems Security policies, procedures, and Standard Operating Procedures (SOPs)., • Enforce configuration management (CM) controls and ensure all hardware/software changes to classified IS are reviewed and approved prior to implementation., • Conduct periodic self-inspections of classified IS programs and remediate findings in coordination with the FSO and program leadership. Continuous Monitoring & Incident Response • Implement and manage a Continuous Monitoring (ConMon) program for all authorized classified information systems., • Monitor audit logs, SIEM alerts, and vulnerability scan results; investigate anomalies and potential insider threats., • Serve as the Facility Incident Response Manager for classified information system security incidents; coordinate reporting to DCSA and GCAs within required timeframes., • Conduct or oversee technical vulnerability assessments and penetration testing as required by the CSA or contract requirements. Personnel Security & Training • Oversee ISSM-delegated Information System Security Officer (ISSO) personnel; provide mentorship, task delegation, and performance oversight., • Develop and deliver annual IS security awareness training and role-based training for users of classified information systems., • Maintain personnel access records and access control lists (ACLs) for all classified IS; ensure need-to-know verification prior to system access grants., • Coordinate with the FSO to ensure the integration of personnel security and information security requirements. Physical & Technical Security Integration • Coordinate with facilities and physical security teams to ensure IS are housed in appropriately accredited spaces (SCIFs, Closed Areas, SAPs) in accordance with ICD 705 and DCSA physical security standards., • Manage and enforce media protection, sanitization, and destruction procedures for classified storage media in accordance with NSA/CSS EPL requirements., • Oversee PKI, multi-factor authentication (MFA), and privileged access management (PAM) implementations across classified networks What You Bring: • Active Top Secret (TS) security clearance; SCI eligibility required or must be obtainable within 6 months of hire., • Minimum of 10 years of progressive experience in information systems security within a DoD or Intelligence Community classified environment with 5 or more year’s direct experience as an ISSM, ISSP, Security Control Assessor (SCA), or equivalent position, • Demonstrated ISSM or ISSO experience supporting DCSA-adjudicated classified IS programs under NISPOM/DAAPM., • A minimum of 3 years of direct working knowledge of the NIST RMF process (NIST SP 800-37, 800-53, 800-171) and DoD Assessment Methodology (DAAPM)., • Experience preparing and managing ATOs, SSPs, SAPs, and POA&Ms for TS and SCI-level information systems., • Proficiency with eMASS (Enterprise Mission Assurance Support Service) or equivalent GRC tool., • Working knowledge of SIEM platforms, vulnerability scanners (e.g., ACAS/Nessus), and HBSS/endpoint security tools., • IAM Level II or III certification required per DoD 8570.01-M / DoD 8140 (e.g., CISSP, CISM, GSLC, or equivalent)., • Current TS/SCI access with polygraph (CI or Full Scope)., • Experience supporting Special Access Programs (SAPs) or Sensitive Compartmented Information Facilities (SCIFs)., • Familiarity with Cross Domain Solutions (CDS), data transfer processes, and CDSE/NSA approval workflows., • Experience with LINUX and Windows hardened STIG baseline implementation and validation., • Knowledge of ICD 503, ICS 500-27, and CNSSI 1253 security control overlays., • Prior DCSA inspection experience (NISP, SAP, or SCI programs)., • Additional certifications such as CASP+, CCSP, Security+, or CEH are a plus., • Direct experience managing the system lifecycle of connected classified systems including Secret Defense Research and Engineering Network (SDREN), Secret Internet Protocol Router Network (SIPRNET), Non-classified Internet Protocol Router Network (NIPRNET, and Joint Worldwide Intelligence Communications System (JWICS) systems . Why E-Space is right for you: As a member of our team, you will play a crucial role in driving our success. Our team members have a strong sense of dedication and responsibility; this includes a strong commitment to our mission to create an entirely new suite of global capabilities to improve lives, business efficiencies and build a smarter planet. This means that there will be times when extra hours, including nights and weekends, may be needed to meet critical deadlines and mission goals. In return, we offer a dynamic work environment with opportunities for professional growth and development and the chance to make a meaningful impact in a high-growth industry. We want you to make the most of your journey at E-Space. That’s why we support and invest in the physical, emotional and financial well-being of our team members and their families. Some of what you can expect when working at E-Space: • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Bosch Building Technologies – Systems Engineer II About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: This position is responsible for integrated security system design and review of system functionality to determine proper operation of access control, IP video and other security systems and controls. Responsibilities: • Prepare drawings and wiring diagrams, based upon project plans and specifications, showing locations of devices, equipment, and wiring etc. for low voltage electrical projects., • Develops functional design, construction drawings, relay settings, and equipment specifications for protection, control, and communications equipment., • Preparing electrical construction documents for both building renovations and new construction projects., • Designing and applying low voltage systems, including security networks, IP Video, mass notification, and security systems., • Responsible for all aspects of low voltage design within designated projects., • Conducts surveys to gather field data; prepares drawings, layouts, and other visual aids; prepares technical construction drawings. Reviews the development of designs for compliance with applicable codes, adopted engineering standards, and good engineering practices., • Deliver technical presentations to internal and external audiences as required as part of the design process., • Work in a close team environment with Sales, Project Management, and Installation Departments, • Work with CAD Drafters to produce installation and drawing packages., • Engineering sales support and review of the functionality and design of systems being proposed by account managers., • Set-up and test new products and design concepts such as network devices, custom designed systems, etc., • High School diploma or equivalent, • Technical 2 year degree or better and/or 3-5 years of security industry design experience, • Experience engineering low voltage systems, preferably experience with AV, DAS and/or Structured Cabling as well., • Certification in 2 Access Control platforms or equivalent documented experience, • Certification in 2 Video Management platforms or equivalent documented experience, • Certification in 1 Intrusion platform or equivalent documented experience, • Knowledge of NEC Code and low voltage systems, • Proficiency with Microsoft Office and computerized business systems, • Valid US drivers license, • Certification in Networking and/or SQL. In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Travel Requirements: No travel required, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description Specialty: General Urology and Men’s Health Job description: General Job Description The Advanced Practice Provider (APP) evaluates, plans and provides care for patients in consultation with and under direct supervision of the supervising physician(s). The APP obtains medical and personal histories, performs physical exams, reviews diagnostic studies, communicates results and educates patients and families. The APP provides follow-up treatments and care to patients in accordance with protocols established by physicians. The APP maintains effective communication with patients, staff and physicians; provides patient care in a competent, professional and courteous manner. Main area of focus in urology specific to general urology and men’s health. Essential Job Responsibilities: • Performs all duties in accordance with clinical, OSHA and infection control standards., • Adheres to and follows, including but not limited to, infection control, biohazard waste, sterilization and disinfection, medication administration and storage of controlled substance policies and procedures throughout the facility., • Adheres to biohazard waste policy and procedure for proper disposal of biomedical waste., • Obtains medical and personal histories and performs physical examinations on new and established patients., • Provide and document direct treatment and management of health conditions., • Initiates appropriate diagnostic testing and treatment of medical conditions., • Analyzes and interprets laboratory and radiology results and evaluates the need for further assessment., • Performs therapeutic and diagnostic procedures as indicated by training and experience., • Provides follow-up and health maintenance care to align with established evidence-based practice guidelines., • Provides counseling and education regarding health-related issues., • Documents clinical care of patient in electronic health record according to established guidelines., • Delivers quality patient care and participates in continuous quality improvement processes and initiatives., • Assist with training activities as needed., • Maintains accuracy and productivity levels as established by department standards., • Performs, organizes and streamlines operational tasks to reduce the potential for errors., • Maintains patient safety and confidentiality at all times., • Assigned location is UPNT Arlington but may be required to travel to other UPNT locations as assigned., • Minimum of 1-3 years of hands on clinical experience working with a licensed physician or associate practitioner preferred. Preference given to those with Urology experience., • Minimum of 1-3 years of administering injections preferred., • Exceptional customer service skills and phone etiquette., • Ability to maintain effective and organized systems to ensure timely patient flow., • Working knowledge of medical terminology., • Computer proficiency and prior experience with Electronic Medical Records preferred., • Requires frequent lifting of patients and bending/carrying items weighing up to 50 pounds., • Adequate physical ability including sufficient manual dexterity to perform the requisite, • Master’s degree, • Physician Assistant licensure in Texas and/or Nurse Practitioner licensure in Texas., • CPR/BLS certification, • All License and certification(s) must be current and maintained during employment., • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Tuition reimbursement

For over 80 years, Oil States has been a highly respected technology and solutions pioneer manufacturing diverse products for offshore platforms, subsea pipelines, defense, and general industrial applications worldwide. Oil States recognizes that our diverse workforce is our greatest asset. We offer a competitive compensation package, including paid time off as well as health insurance eligibility on the first day of employment. Paid time off includes vacation, holiday and sick time. Benefits include medical, dental, vision, 401k, life insurance, long and short-term disability, and flexible spending accounts. When we contribute to the company's success, we all win. In our organization, the Assembler Test Tech II has a critical and challenging role in helping achieve innovation and meeting our commitments. POSITION SUMMARY: Responsible for the safe, efficient, handling, installation and assembly of large, heavy steel components in support of the manufacturing process and testing functions as well as scheduling duties. ESSENTIAL DUTIES AND RESPONSIBILITIES: \n • Safely, responsibly and efficiently lifts handles and assembles large parts, tools and equipment.\n, • Operate a variety of equipment including common manual/pneumatic hand tools, hydraulic torque wrenches, hydraulic tensioning devices, hydraulic presses, steam systems, overhead cranes, and forklift.\n, • Ensure products are shipped on time.\n, • Ensure safe working environment and clean work area.\n, • Assist with mechanical test programs and manufacturing procedures.\n, • Communicate and coordinate activities with various individuals.\n, • Travel to and perform field operations at either onshore or offshore facilities, commensurate with experience, including appropriate training to meet site requirements.\n, • Installation of various test devices.\n, • Perform other duties assigned by supervisor.\n\n QUALIFICATION REQUIREMENTS: \n • High school diploma or equivalent.\n, • A heavy equipment manufacturing and/or oilfield services background with at least 2-4 years of experience in the assembly of heavy equipment.\n, • Read, understand and follow written procedures and mechanical drawings.\n, • First hand knowledge and experience with both common hand tools, heavy lift equipment, hydraulic torque wrenches and hydraulic tensioning devices.\n, • Basic understanding of mechanical devices, manufacturing processes and their operation.\n, • Possess a broad knowledge of good safety practices and an excellent safety record.\n, • Basic mathematical skills.\n, • Good communication skills.\n, • Experience in production or manufacturing environment.\n, • Strong organization skills.\n, • Good interpersonal skills and the capacity to work constructively with others.\n, • Ability to read, understand and follow written procedures and mechanical drawings.\n\n PHYSICAL REQUIREMENTS \n • Able to work physically demanding 8 to 12 hour shifts.\n, • Capable of considerable bending, standing and lifting for extended periods.\n, • Capable of working outside in all weather conditions.\n, • Lifting up to 50 pounds frequently and 75-100 pounds occasionally with assistance.\n\n CITIZENSHIP REQUIREMENTS - By contractual requirements, the project and job location for this position requires that all persons establish proof of US Citizenship. Dual Citizenship (US citizenship and citizenship of some other country) cannot be accepted. You will be required to provide original or certified copies of documents establishing your citizenship prior to consideration for this position. Be part of what's next at Oil States ! Over 80 years in business An Equal Opportunity Employer An E-Verify Employer Un empleador de E-Verify Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

For over 80 years, Oil States has been a highly respected technology and solutions pioneer manufacturing diverse products for offshore platforms, subsea pipelines, defense, and general industrial applications worldwide. Oil States recognizes that our diverse workforce is our greatest asset. We offer a competitive compensation package, including paid time off as well as health insurance eligibility on the first day of employment. Paid time off includes vacation, holiday and sick time. Benefits include medical, dental, vision, 401k, life insurance, long and short-term disability, and flexible spending accounts. When we contribute to the company's success, we all win. In our organization, the Assembler Test Tech II has a critical and challenging role in helping achieve innovation and meeting our commitments. POSITION SUMMARY: Responsible for the safe, efficient, handling, installation and assembly of large, heavy steel components in support of the manufacturing process and testing functions as well as scheduling duties. ESSENTIAL DUTIES AND RESPONSIBILITIES: \n • Safely, responsibly and efficiently lifts handles and assembles large parts, tools and equipment.\n, • Operate a variety of equipment including common manual/pneumatic hand tools, hydraulic torque wrenches, hydraulic tensioning devices, hydraulic presses, steam systems, overhead cranes, and forklift.\n, • Ensure products are shipped on time.\n, • Ensure safe working environment and clean work area.\n, • Assist with mechanical test programs and manufacturing procedures.\n, • Communicate and coordinate activities with various individuals.\n, • Travel to and perform field operations at either onshore or offshore facilities, commensurate with experience, including appropriate training to meet site requirements.\n, • Installation of various test devices.\n, • Perform other duties assigned by supervisor.\n\n QUALIFICATION REQUIREMENTS: \n • High school diploma or equivalent.\n, • A heavy equipment manufacturing and/or oilfield services background with at least 2-4 years of experience in the assembly of heavy equipment.\n, • Read, understand and follow written procedures and mechanical drawings.\n, • First hand knowledge and experience with both common hand tools, heavy lift equipment, hydraulic torque wrenches and hydraulic tensioning devices.\n, • Basic understanding of mechanical devices, manufacturing processes and their operation.\n, • Possess a broad knowledge of good safety practices and an excellent safety record.\n, • Basic mathematical skills.\n, • Good communication skills.\n, • Experience in production or manufacturing environment.\n, • Strong organization skills.\n, • Good interpersonal skills and the capacity to work constructively with others.\n, • Ability to read, understand and follow written procedures and mechanical drawings.\n\n PHYSICAL REQUIREMENTS \n • Able to work physically demanding 8 to 12 hour shifts.\n, • Capable of considerable bending, standing and lifting for extended periods.\n, • Capable of working outside in all weather conditions.\n, • Lifting up to 50 pounds frequently and 75-100 pounds occasionally with assistance.\n\n CITIZENSHIP REQUIREMENTS - By contractual requirements, the project and job location for this position requires that all persons establish proof of US Citizenship. Dual Citizenship (US citizenship and citizenship of some other country) cannot be accepted. You will be required to provide original or certified copies of documents establishing your citizenship prior to consideration for this position. Be part of what's next at Oil States ! Over 80 years in business An Equal Opportunity Employer An E-Verify Employer Un empleador de E-Verify Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

For over 80 years, Oil States has been a highly respected technology and solutions pioneer manufacturing diverse products for offshore platforms, subsea pipelines, defense, and general industrial applications worldwide. Oil States recognizes that our diverse workforce is our greatest asset. We offer a competitive compensation package, including paid time off as well as health insurance eligibility on the first day of employment. Paid time off includes vacation, holiday and sick time. Benefits include medical, dental, vision, 401k, life insurance, long and short-term disability, and flexible spending accounts. When we contribute to the company's success, we all win. In our organization, the Assembler Test Tech II has a critical and challenging role in helping achieve innovation and meeting our commitments. POSITION SUMMARY: Responsible for the safe, efficient, handling, installation and assembly of large, heavy steel components in support of the manufacturing process and testing functions as well as scheduling duties. ESSENTIAL DUTIES AND RESPONSIBILITIES: \n • Safely, responsibly and efficiently lifts handles and assembles large parts, tools and equipment.\n, • Operate a variety of equipment including common manual/pneumatic hand tools, hydraulic torque wrenches, hydraulic tensioning devices, hydraulic presses, steam systems, overhead cranes, and forklift.\n, • Ensure products are shipped on time.\n, • Ensure safe working environment and clean work area.\n, • Assist with mechanical test programs and manufacturing procedures.\n, • Communicate and coordinate activities with various individuals.\n, • Travel to and perform field operations at either onshore or offshore facilities, commensurate with experience, including appropriate training to meet site requirements.\n, • Installation of various test devices.\n, • Perform other duties assigned by supervisor.\n\n QUALIFICATION REQUIREMENTS: \n • High school diploma or equivalent.\n, • A heavy equipment manufacturing and/or oilfield services background with at least 2-4 years of experience in the assembly of heavy equipment.\n, • Read, understand and follow written procedures and mechanical drawings.\n, • First hand knowledge and experience with both common hand tools, heavy lift equipment, hydraulic torque wrenches and hydraulic tensioning devices.\n, • Basic understanding of mechanical devices, manufacturing processes and their operation.\n, • Possess a broad knowledge of good safety practices and an excellent safety record.\n, • Basic mathematical skills.\n, • Good communication skills.\n, • Experience in production or manufacturing environment.\n, • Strong organization skills.\n, • Good interpersonal skills and the capacity to work constructively with others.\n, • Ability to read, understand and follow written procedures and mechanical drawings.\n\n PHYSICAL REQUIREMENTS \n • Able to work physically demanding 8 to 12 hour shifts.\n, • Capable of considerable bending, standing and lifting for extended periods.\n, • Capable of working outside in all weather conditions.\n, • Lifting up to 50 pounds frequently and 75-100 pounds occasionally with assistance.\n\n CITIZENSHIP REQUIREMENTS - By contractual requirements, the project and job location for this position requires that all persons establish proof of US Citizenship. Dual Citizenship (US citizenship and citizenship of some other country) cannot be accepted. You will be required to provide original or certified copies of documents establishing your citizenship prior to consideration for this position. Be part of what's next at Oil States ! Over 80 years in business An Equal Opportunity Employer An E-Verify Employer Un empleador de E-Verify Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Greet customers on sales floor, directs them to product or to parts specialist. Check out customers and deter shoplifters. Keep the front area stocked and fronted, stock merchandise according to planograms or displays, and complete sales preparation. Bilingual candidates encouraged to apply. ESSENTIAL JOB FUNCTIONS Merchandiser Greet customers on sales floor, assisting them in location of merchandise or directs them to parts specialist if hard parts are needed. Check in, price, and put up stock. Keep merchandise on display floor fronted, full, and clean on a daily basis. Make display changes according to company guidelines, planograms, etc. Make all out-front price changes. Make sure all "sale" signs are in place, sales flyer rack is stocked, maintain sufficient quantities of sale merchandise on display. Remove all sale material when sale ends and restore original pricing. Assist with stock adjustments, cycle counts, and overstock returns. Work with manager to complete store To Do List and Team Weekly tasks. Acts as main shoplifting deterrent/front floor security. Assist with O'Reilly Image Maker responsibilities. Clock in/out according to company policy. Cashier Check out customers purchasing front floor merchandise in a quick and friendly manner. Handle merchandise returns from customers in a friendly and efficient manner. Whenever express lane is not being utilized and the counter is busy, assist customers by finishing tickets, taking money, checks, and credit cards, etc. SKILLS/EDUCATION/KNOWLEDGE/EXPERIENCE/ABILITIES Required: Good aptitude for dealing with number sequences, good interpersonal communicational skills, good organizational skills. Desired: Previous cashier and/or stocking experience. Ability to drive manual transmission vehicle. Fluency in multiple languages (Spanish is highly desired). O'Reilly Auto Parts has a proven track record of growth and stability. O'Reilly is full of successful career stories and believes in a strong promote-from-within philosophy, encouraging you to grow your career along with the organization. Total Compensation Package: • Competitive Wages & Paid Time Off, • Stock Purchase Plan & 401k with Employer Contributions Starting Day One, • Medical, Dental, & Vision Insurance with Optional Flexible Spending Account (FSA), • Team Member Health/Wellbeing Programs, • Tuition Educational Assistance Programs, • Opportunities for Career Growth O'Reilly Auto Parts is an equal opportunity employer. The Company does not discriminate on the basis of race, religion, color, national origin or ancestry (including immigration status or citizenship), sex, sexual orientation, gender identity, pregnancy (including childbirth, lactation, and related medical conditions,) age (40 and over), veteran status, uniformed service member status, physical or mental disability, genetic information (including testing or characteristics) or another protected status as defined by local, state, or federal law, as applicable. Qualified individuals with a disability may be entitled to reasonable accommodation under the Americans with Disabilities Act. If you require a reasonable accommodation during the application or employment process, please send an email to: or call (800) 471-7431 option , and provide your requested accommodation, and position details.

Job Description We are pioneers. We were the first to break the sound barrier and to design the first functional jetpack. We were aboard NASA’s first lunar mission and brought advanced tiltrotor systems to market. Today, we are defining the future of on-demand mobility. At Bell, we are proud to work for an iconic company with superb talent, rapidly creating novel and coveted vertical lift experiences. Bell-Textron Inc. is seeking a Gear, Cut & Grind technician to support our manufacturing operations at our Drive Systems Center at out Drive System Center location in Grand Prairie, Texas. **Work Performed: ** * Sets up and operates all types of gear manufacturing equipment including gear cutters, gear grinders, gear shavers, lapping machines, etc., to produce a wide variety of gears and splines including spiral bevel, helical and hypoid gears. * Setups and work must be held to extremely close tolerances. * Advises and assists in development of new gears and gear cutting processes. * Tests and checks gears using gear testing and checking machines and equipment. * Sets up and/or performs all grinding on case hardened surfaces. **Tools & Equipment Used: ** • GD&T, • CNC Machine Setup & Changeover, • Precision Measurement & Hand Metrology, • CNC Mill (3-4 axis VMC), • Manual Grinder, • CNC Lathe (2-4 axis), • Manual Vertical Mill, • Jig Grinder

Job Description The specific pay rate and level will depend on the successful candidate’s qualifications, prior experience and location. “Perks” • DailyPay Available!! Make any day a payday - You deserve to get paid any day!!, • 10 days + 2 half days Company Paid Holidays + vacation and sick time!, • Medical, Dental, and Vision benefit options, • 401(k) Retirement Plan with Company Match., • Company paid Life Insurance, • We also offer HSA, FSA, EAP and Pet Insurance!, • Safety and Recognition programs, • Boot Program, • Drug-Free, Safety-Focused Work Environment, • It’s a great place to work where you are given the space to share ideas and opinions and the bottom-line is “YOU” matter! “A Day in the Life” As the Team Lead you will lead a crew of employees in servicing and repairing modular buildings. Coordinate and prioritize work schedule for production crew, assign modular mechanics and general maintenance employees. Verify quality according to our standards. “What You’ll Do” • Coordinate and prioritize work schedule for production crew, assign modular mechanics tasks, learn/train as needed, and verify quality according to our standards., • Perform preventative maintenance and construction on modular buildings to include, but not limited to, plumbing, carpentry, electrical, painting, and cleaning., • Monitor the work of team members to meet productivity, quality and safety requirements, • Ensure team maintains tools, supplies and work area consistent with the area’s 6S checklist, • Actively participate in safety meetings and safety training of crew members. Carry out current industry safety practices to include knowledge of OSHA requirements. Conduct daily and weekly safety audits and document results, • Provide continuous training of crew members and new employees; coaches and counsels team members as needed with regards to responsibilities of their positions, • Act as a backfill for other leaders when necessary, • Perform other duties as assigned, • Work schedule Monday-Thursday 6:00am-4:30pm “Must Haves” • Prior experience of at least 4-6 years in the construction or related industry performing and leading general construction trades required., • Able to effectively lead a team and offer guidance and direction, • Able to read and understand blueprints, schematics, procedures and Company specific work orders, work instructions and floor plans provided, • Able to work outside in variable weather conditions, • Ability to use both manual and power tools and follow operating guidelines, • Ability to safely perform all tasks and understand Company’s safety policies and procedures, • Deliver a high-quality output consistent with the Company’s construction standards, • Able to take, record and follow standard measurements and cut or separate materials to specific measurements or quantities, • Able to read Company’s construction documents (provided in English) and provide guidance to construction team to complete necessary work, • Fluency in spoken and written Spanish preferred, • Prior experience with electrical, plumbing, HVAC or other specialties preferred, • Prior experience overseeing the work of a team of at least 6 employees desired, • Knowledge of current building codes to include 2016 CBC and 2018 IBC and ADA a plus., • Knowledge of LEAN a plus, • Ability to complete material and labor take offs from blue prints a plus, • Valid Driver’s License Special Considerations: • Position requires manual dexterity and the ability to maintain physical activity for most of the day, • Must be able to lift up to 50 pounds and hold or lift a variety of objects, • Able to carry, bend, stoop, turn, kneel, crawl, climb a ladder and other manual labor activities Flexibility & Evolving Responsibilities This job posting is intended to convey the general nature and level of work expected in the role. It is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee. Responsibilities may evolve over time, and team members may be asked to take on additional tasks or adjust their focus in response to changing business needs—sometimes with or without prior notice. This flexibility is a valued part of our culture and supports our commitment to collaboration, agility, and shared success. McGrath will continue pre-employment drug testing including marijuana, even in states where it is legal, for this position which is classified as safety-sensitive within our construction operations and Drivers. Ensuring a drug-free environment is not only essential for the well-being of our team members but also aligns with regulatory requirements that govern safety-sensitive positions and commercial driving. Pre-employment screenings are conducted after a conditional offer of employment is extended, in accordance with fair hiring laws. All qualified applicants will receive consideration for employment without regard to race, sex, color, religion, sexual orientation, gender identity, national origin, protected veteran status, on the basis of disability and any other legally protected status. We are interested in every qualified candidate who is legally authorized to work in the United States on a permanent basis. At this time, we do not sponsor employment visas or provide immigration sponsorship now or in the future. Our company uses E-Verify to confirm employment eligibility. #MMMC

Job Description We are pioneers. We were the first to break the sound barrier and to design the first functional jetpack. We were aboard NASA’s first lunar mission and brought advanced tiltrotor systems to market. Today, we are defining the future of on-demand mobility. At Bell, we are proud to work for an iconic company with superb talent, rapidly creating novel and coveted vertical lift experiences. Bell-Textron Inc. is seeking a Gear, Cut & Grind technician to support our manufacturing operations at our Drive Systems Center at out Drive System Center location in Grand Prairie, Texas. **Work Performed: ** * Sets up and operates all types of gear manufacturing equipment including gear cutters, gear grinders, gear shavers, lapping machines, etc., to produce a wide variety of gears and splines including spiral bevel, helical and hypoid gears. * Setups and work must be held to extremely close tolerances. * Advises and assists in development of new gears and gear cutting processes. * Tests and checks gears using gear testing and checking machines and equipment. * Sets up and/or performs all grinding on case hardened surfaces. **Tools & Equipment Used: ** • GD&T, • CNC Machine Setup & Changeover, • Precision Measurement & Hand Metrology, • CNC Mill (3-4 axis VMC), • Manual Grinder, • CNC Lathe (2-4 axis), • Manual Vertical Mill, • Jig Grinder

Job Description The Technology Specialist I, installs, repairs, upgrades, calibrates, and troubleshoots current and future technology products. In addition, this position trains customers on all levels of survey infrastructure products and machine technology. The incumbent in this position is expected to model the following practices daily: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions: • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Demonstrates technology products and recommends the best technology solutions for each customer application, • Installs laser, Global Positioning System (GPS), and Universal Total Station (UTS) systems on all makes and models of heavy equipment and sets up correctional GPS sources, i.e., Base Stations, Internet Base Station Service (IBSS) or Virtual Reference Station (VRS), • Teaches customers and employees on effective utilization of the technology products to optimize productivity and monitor machine health to include, but not limited to; Laser systems, GPS systems, UTS system, Infrastructure, Survey Products, Site Calibrations, File Management, VisionLink, and Winflash, • Coordinates with manager to develop product database that will assist in troubleshooting and works with other departments to ensure customer needs are met, • Creates and initiates machine communications with back office for downloading/uploading of models and uploading of surface data information, • Troubleshoots electrical systems, CAN and Ethernet networks, and hydraulic systems, documenting the process to increase understanding and efficiencies, • Performs system testing with sample/live data and technology, • Maintains and improves current technology, • Verifies site calibrations using proper survey techniques and trouble-shoot using the same. If the site calibration is bad, can use rovers, robotic total stations, auto levels, and can run a level loop if necessary, to identify the problem, • Works with various programs to include, but not limited to, MAS, SiSweb, ET, Business Center, Trimble Connected Community, Veda, and Trimble Store, • Install, measure up, calibrate Earthworks platforms on all models and machine brands of supported machines with use of robotic total stations and survey products, • Performs application calibrations, troubleshooting, root cause analysis, and problem resolution, • Service Technician tests, diagnoses, repairs, and adjusts electronic and optical equipment to ensure that they are in the optimal working order. This position is a multidisciplinary role requiring operational understanding, and underlying methodologies for heavy civil site construction., • Utilizes Business Center software to update customer files, check for modeling errors and verify data, • Works with other departments to ensure that customer’s needs are met, • Trains customers on CAT integrated technology products, • Pulls and prepares inventory to complete tasks, • Covers periodic rotations on the “SITECH Help Desk” where the technician must be able to help customers troubleshoot machine and off machine issues over the phone using their extensive technology knowledge. Must work through customer issues while mental visualizing what the customer is doing and explaining. Must maintaining patients and professionalism to help solve the customer issues. This is a customer service role., • Requires regular and punctual employee attendance, • Works safely always and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Performs other duties as assigned Knowledge, Skills, and Abilities: • Knowledge with current computer software, related hardware, and machine electronic systems, • Strong electric diagnostic skills, schematic reading, and understanding, • Working knowledge 3D site modeling and the interaction of models with machine controls and site calibrations, • Ability to operate multiple sized and brands of heavy equipment to include motor graders, dozers, loaders, skid steers, asphalt trimmers, rock mills, piling machines, paving systems to include but not limited to asphalt pavers, concrete pavers and curbing machines., • Ability to install and repair hydraulic valve systems and associated control systems, • Strong electrical system experience. Ability to read and understand electrical system schematics, troubleshoot the same with a multi meter and sound troubleshooting techniques. Ability to troubleshoot CAN network systems. Also, able to build and pin out cables to make cables or to correct wiring issues., • Ability to disassemble and repair various electronic systems related to machine technology and survey infrastructure products. Must be able to read and understand wiring diagrams, • Ability to cut, grind, weld, and solder, • Excellent work habits, accuracy, attention to detail, and quality of work, • Excellent customer service skills, • Verbal and written communication skills, • Ability to follow logical troubleshooting procedures, • Effective influencing skills which include teaching, motivating, and developing customers and employees, • Strong organization and time management skills, • Critical thinking and problem-solving skills, • Ability to work independently and as part of a team, • Ability to be self-starting and self-motivated, • Ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects, • Ability to read, write, and understand information, • Ability to listen to and understand information and ideas presented through spoken words and sentences, • High school diploma or equivalent and some college, or additional technical training, required; Associates Degree in Survey, Auto, or Diesel Mechanics preferred, • Trimble Certified Trainer preferred, • Up to 30% travel may be required, to include overnight stays, • Significant amount of time standing, walking, kneeling, crouching, stooping, and reaching, • Constant movement and use of hands, this position requires good manual dexterity, • Frequently communicates with others, must be able to exchange accurate information in these situations, • Routinely reacts to visual, auditory, and other signals including alarms and instructions, and is required to visually inspect work, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Be able to maneuver safely and work underneath equipment, • Occasionally lifts and moves materials and equipment up to 50 lbs., • Regularly works outdoors around moving mechanical parts and may be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Requires wearing common protective or safety equipment, • Works in an enclosed and open vehicle or equipment, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high-speed rotating equipment, • Works in extremely bright or inadequate lighting, • Exposure to high noise levels and body vibration, • Works in confined workspaces, awkward positions, and high places, • Exposure to minor burns, cuts, bites, or stings Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-SIT

Job DescriptionDescriptionThe Technology Specialist I, installs, repairs, upgrades, calibrates, and troubleshoots current and future technology products. In addition, this position trains customers on all levels of survey infrastructure products and machine technology. The incumbent in this position is expected to model the following practices daily: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions · Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission · Demonstrates technology products and recommends the best technology solutions for each customer application · Installs laser, Global Positioning System (GPS), and Universal Total Station (UTS) systems on all makes and models of heavy equipment and sets up correctional GPS sources, i.e., Base Stations, Internet Base Station Service (IBSS) or Virtual Reference Station (VRS) · Teaches customers and employees on effective utilization of the technology products to optimize productivity and monitor machine health to include, but not limited to; Laser systems, GPS systems, UTS system, Infrastructure, Survey Products, Site Calibrations, File Management, VisionLink, and Winflash · Coordinates with manager to develop product database that will assist in troubleshooting and works with other departments to ensure customer needs are met · Creates and initiates machine communications with back office for downloading/uploading of models and uploading of surface data information · Troubleshoots electrical systems, CAN and Ethernet networks, and hydraulic systems, documenting the process to increase understanding and efficiencies · Performs system testing with sample/live data and technology · Maintains and improves current technology · Verifies site calibrations using proper survey techniques and trouble-shoot using the same. If the site calibration is bad, can use rovers, robotic total stations, auto levels, and can run a level loop if necessary, to identify the problem · Works with various programs to include, but not limited to, MAS, SiSweb, ET, Business Center, Trimble Connected Community, Veda, and Trimble Store · Install, measure up, calibrate Earthworks platforms on all models and machine brands of supported machines with use of robotic total stations and survey products · Performs application calibrations, troubleshooting, root cause analysis, and problem resolution · Service Technician tests, diagnoses, repairs, and adjusts electronic and optical equipment to ensure that they are in the optimal working order. This position is a multidisciplinary role requiring operational understanding, and underlying methodologies for heavy civil site construction. · Utilizes Business Center software to update customer files, check for modeling errors and verify data · Works with other departments to ensure that customer’s needs are met · Trains customers on CAT integrated technology products · Pulls and prepares inventory to complete tasks · Covers periodic rotations on the “SITECH Help Desk” where the technician must be able to help customers troubleshoot machine and off machine issues over the phone using their extensive technology knowledge. Must work through customer issues while mental visualizing what the customer is doing and explaining. Must maintaining patients and professionalism to help solve the customer issues. This is a customer service role. · Requires regular and punctual employee attendance · Works safely always and adheres to all applicable safety policies; complies with all company policies, procedures, and standards · Performs other duties as assigned Knowledge, Skills, and Abilities · Knowledge with current computer software, related hardware, and machine electronic systems · Strong electric diagnostic skills, schematic reading, and understanding · Working knowledge 3D site modeling and the interaction of models with machine controls and site calibrations · Ability to operate multiple sized and brands of heavy equipment to include motor graders, dozers, loaders, skid steers, asphalt trimmers, rock mills, piling machines, paving systems to include but not limited to asphalt pavers, concrete pavers and curbing machines. · Ability to install and repair hydraulic valve systems and associated control systems · Strong electrical system experience. Ability to read and understand electrical system schematics, troubleshoot the same with a multi meter and sound troubleshooting techniques. Ability to troubleshoot CAN network systems. Also, able to build and pin out cables to make cables or to correct wiring issues. · Ability to disassemble and repair various electronic systems related to machine technology and survey infrastructure products. Must be able to read and understand wiring diagrams · Ability to cut, grind, weld, and solder · Excellent work habits, accuracy, attention to detail, and quality of work · Excellent customer service skills · Verbal and written communication skills · Ability to follow logical troubleshooting procedures · Effective influencing skills which include teaching, motivating, and developing customers and employees · Strong organization and time management skills · Critical thinking and problem-solving skills · Ability to work independently and as part of a team · Ability to be self-starting and self-motivated · Ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects · Ability to read, write, and understand information · Ability to listen to and understand information and ideas presented through spoken words and sentences · Strong computer skills and the ability to work in Microsoft Word, Excel, CAD, AGTEC, in addition to various warehouse and accounting programs Requirements Education and Experience: · High school diploma or equivalent and some college, or additional technical training, required; Associates Degree in Survey, Auto, or Diesel Mechanics preferred · Trimble Certified Trainer preferred · Up to 2 years experience with machine control products and infrastructure preferred Supervisory Responsibilities: None Travel: · Up to 30% travel may be required, to include overnight stays · Valid Driver’s License required Physical Requirements: · Significant amount of time standing, walking, kneeling, crouching, stooping, and reaching · Constant movement and use of hands, this position requires good manual dexterity · Frequently communicates with others, must be able to exchange accurate information in these situations · Routinely reacts to visual, auditory, and other signals including alarms and instructions, and is required to visually inspect work · Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue · Be able to maneuver safely and work underneath equipment · Occasionally lifts and moves materials and equipment up to 50 lbs. · Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment Work Environment: · Regularly works outdoors around moving mechanical parts and may be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity · Requires wearing common protective or safety equipment · Works in an enclosed and open vehicle or equipment · Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high-speed rotating equipment · Works in extremely bright or inadequate lighting · Exposure to high noise levels and body vibration · Works in confined workspaces, awkward positions, and high places · Exposure to minor burns, cuts, bites, or stings Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job Description Serving the DFW Metroplex since 1960, Fox Electric (TECL 17176), has earned the trademark for reliability and performance. We offer fully trained employees and are dedicated to quality Commercial, Residential, and Service work. We are professional and agile. Overview: We are seeking skilled Master, Journeyman, and Wireman service electricians to join our team. As an electrician, you will be responsible for installing, maintaining, and repairing electrical systems in various settings. This is a full-time position with competitive pay and benefits. Responsibilities: • Install, maintain, and repair electrical systems in residential, commercial, and industrial settings, • Read and interpret blueprints and technical diagrams to determine the layout of electrical wiring, • Inspect electrical components, such as transformers and circuit breakers, to identify hazards or defects, • Diagnose and troubleshoot electrical malfunctions using testing devices, • Repair or replace wiring, equipment, or fixtures using hand tools and power tools, • Follow safety guidelines and adhere to electrical codes and regulations, • Collaborate with other team members to complete projects on time and within budget, • Provide excellent customer service and address any client concerns Requirements: • Valid State of Texas issued electrician license, • Proven experience as a Master, Journeyman or Wireman electrician or similar role, • Strong knowledge of electrical systems, wiring, and equipment, • Proficient in reading blueprints and technical diagrams, • Familiarity with low-voltage systems and logic controllers, • Ability to work independently or as part of a team, • Excellent problem-solving skills and attention to detail, • Physical stamina to perform manual labor and work in various environments, • Strong communication skills If you are a skilled electrician looking for a challenging role with opportunities for growth, we encourage you to apply. We offer competitive pay, a benefits package, and a supportive work environment. Join our team today!

We are looking for a highly skilled Lead Test Engineer to support and manage manual and automation test efforts. Analyze, design, and build manual and automated test cases based on system requirements and design specification. Design the overall testing plan and master test schedule for simple level

The inspector must be capable of interpreting technical drawings in both inch and metric systems, performing dye penetrant testing, controlling and following up on nonconforming materials, contributing to 5S initiatives, monitoring calibration status of inspection instruments, maintain compliance wi

Take the next step in your career as our new Netflix QA Tester to test features for bugs and usability problems.Ensure all safety and quality standards are met.Work closely with your team to maintain high performance and efficiency.Perks include competitive pay, flexible scheduling, training opportu

The inspector must be capable of interpreting technical drawings in both inch and metric systems, performing dye penetrant testing, controlling and following up on nonconforming materials, contributing to 5S initiatives, monitoring calibration status of inspection instruments, maintain compliance wi

QA Analyst Remote Job Duties: • Partner with the product and engineering team to understand project objectives, gather requirements, troubleshoot issues, and implement scalable test solutions • Design

This position is part of the Administrative Applications Software Quality Assurance team and is responsible for developing and maintaining automated test cases using Playwright or similar technology, and for developing and maintaining test scripts for both manual and automated testing. Perform manua

Key Responsibilities: - Develop and execute test cases and test plans to ensure the quality of our products and services - Identify, report, and track bugs and issues found during testing - Collaborate with the development team to troubleshoot and resolve issues - Conduct regression testing to ensur

The Software Engineer will be responsible for designing, building, testing, and maintaining high-quality software applications.

Key Responsibilities: - Develop and execute test plans and test cases for software products - Identify and report any defects or issues in a timely manner - Collaborate with development team to resolve issues and improve product quality - Conduct regression testing to ensure that defects are fixed a

The Software Engineer will be responsible for designing, building, testing, and maintaining high-quality software applications.

Experienced in manual and/or automated testing, familiar with common QA methodologies and tools. Organized and able to manage multiple testing tasks and priorities in a timely manner.