Operating engineer jobs in Buffalo, New YorkCreate job alerts

Job DescriptionRole Summary This role is responsible for operating and maintaining up to two precision grinding or machining systems including ancillary automation, auto gages, and wash equipment — while consistently meeting quality and productivity standards. The operator performs setups ranging from basic to advanced, conducts in-process inspections using calibrated gages, and carries out planned preventive and minor corrective maintenance. Key Responsibilities Maintain a safe and clean work area per 6S standards. Refer unusual or unsafe conditions to supervisor. Know appropriate level of shop math as required. Read and understand blueprints. Inspect work produced and show a genuine interest in producing quality work. Setup inspection gages such as Etalon Micrometer and profilometer. Have most of the tools of the trade. Operate and maintain (2) two machines with high standards of quality and quantity; (2) two grinders or (1) one grinder and (1) one broach or assembly machine. Operate and maintain ancillary equipment such as loader(s) (automation, robots), auto gage(s), and wash(s) (rinse, wash, rust inhibit) with high standards of quality and quantity. Hand load and hand pack. Take full swarf carts to processing area and bring empty swarf carts back to machines. Perform minor machine maintenance. (Planned Operator Maintenance and Preventive Maintenance) Maintain the Henry System, such as changing paper, checking fluid levels and fluid concentration. Recognize problems, correct them and make recommendations on how to prevent them to your supervisor or support engineer. (Machine, Material, Tool) Have a thorough understanding of speeds, feeds and tooling. Set-up basic jobs within a reasonable length of time without assistance. Set-up advanced jobs within a reasonable length of time with assistance. Maintain proper documentation and communications to ensure efficient coordination between shifts and departments (e.g. quality, engineering, maintenance) Orient when requested by supervisor. Lead when mutually agreed. Comply with all Quality Management System procedures and work instructions. Perform other related duties as requested by supervisor.

Job DescriptionDescription: Job Title: 2nd or 3rd Shift CNC Mill Operator Department: Production Supervisor: Operations Manager- Manth FLSA Status: Non-Exempt Summary of Job: The Mill Machine Operator will be responsible for setting up, maintaining and operating Mill machines to produce precision parts that meet quality standards. The Mill Machine Operator will also be responsible for reading and interpreting blueprints, technical drawings and specifications, and working closely with other team members to ensure production goals are met or exceeded. Essential Duties and Responsibilities · Operate and maintain CNC Mill machinery from blueprints. · Work with Manufacturing Engineer on program changes to the machine, when needed. · Perform quality checks on parts for accuracy according to blueprints, and to ensure the product meets quality standards. · Identify product defects and work with QC team. · Set up tools and machinery for individual projects. · Perform all work in accordance with established safety procedures. · Follow all safety procedures and company policies. · Maintain a professional, clean and safe work area. · Other duties as assigned. Requirements: Knowledge, Skills and Abilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. · Mill machining experience required. · Knowledge of FANUC controls. · Knowledge of 4th axis operation, a plus. · Able to use measuring equipment such as Calipers, Micrometers, Indicators, etc. · Able to read and interpret charts, drawings and blueprints. · Knowledge of safety procedures relating to operating Grinding machinery and handling materials. · Ability to interpret, edit, and program efficiently, when required. · Must be able to follow directions and perform work accurately and thoroughly. · Ability to use thinking and reasoning to solve a problem. · Attention to detail and ability to maintain accuracy. · Strong communication skills to work as part of a team. · Machinist tools required. · High School Diploma, or GED. Physical Job Requirements and Work Environment: The safety, health and well-being of our team is our leading value! The physical demands and work environment described here are representative of those that are encountered by and must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Fast-paced production environment. · Machine shop. · Use of hearing protection, eye protection and safety shoes required. Hearing and eye protection provided. Safety shoes and prescription safety eyewear covered by reimbursement program.

Job DescriptionAre you a mechanical engineer or technical professional looking to build your career through hands-on, field-based work? We are seeking a Mechanical Integrity Inspector for a full-time role based out of our West Seneca office. This role field-focused and involves frequent travel to customer sites locally, with some national travel as well. In this role, you will spend most of your time working directly at client facilities and project sites—often in industrial environments—wearing required personal protective equipment (PPE), working around mechanical systems, and getting hands-on in real-world conditions. This is a great fit for someone who enjoys practical, on-site work, varied environments, and isn’t afraid to get dirty while doing meaningful technical work. As a Mechanical Integrity Inspector, you will inspect, test, and evaluate customer equipment to ensure it is operating safely and within its intended design conditions. You will also communicate directly with clients to understand their needs, explain requirements clearly, and deliver inspection results in a professional and timely manner. Responsibilities: • Perform field inspection and testing services for fixed equipment which may include, but not limited to API-510 Pressure Vessels, API-570 Process Piping and API-653 / STI SP001 Storage Tanks, • Perform non-destructive examinations using company-certified methods., • Utilize software (UltraPipe, Excel) and governing standards to assess the fitness for service and remaining life of inspected equipment., • Produce accurate isometric drawings of piping and equipment using AutoCAD., • Communicate with customers regarding project setup, schedule, equipment needs, and inspection results., • Locate, read, and understand the federal, state, and local requirements governing the equipment being evaluated., • Read and interpret Process and Instrumentation Drawings (P&ID)., • Use appropriate personal protective equipment (PPE), including respirators, and follow health and safety practices., • Perform routine maintenance on designated test equipment, such as ultrasonic equipment and air monitors.Qualifications:, • Minimum of 2 years of experience in Inspection, NDE, or a closely related field; or a degree (A.S. or B.S.) in Mechanical Engineering or a Drafting or a related discipline that includes AutoCAD coursework, • Ability to maintain current inspection/NDE certifications as required by the company; current API or AWS Certifications are a plus, • Proficiency in AutoCAD MS Word, Excel, • Valid driver’s license with the ability to operate a motor vehicle for field testing and inspections, • Willingness and ability to travel to client projects sites locally on a regular basis and nationally up to 20% of the time, • Ability to pass a drug screening, background check, and vision test, • Physically capable of lifting up to 50 lbs. and wearing a respirator and other required personal protective equipment (PPE) Pay Range: The pay range for this position is $25.00 - $30.00 per hour. Specific compensation for the successful candidate will be determined based on their knowledge, skills, and experience. Encorus Group is an equal opportunity employer (EOE/AA Disability/Veteran) and is committed to fair and equitable compensation for our employees. Join Us! At Encorus, we value innovation, collaboration, and professional development. We are a 100% employee-owned ESOP company offering the opportunity to work within a collaborative and supportive environment. We value accuracy, consistency, and professionalism, and are seeking individuals who take pride in their work and want a role with room to develop over time. Employees receive a competitive benefits package, ongoing training, and opportunities to grow within the company. If you’re looking for a stable career with a company that invests in its people, we encourage you to apply. Powered by JazzHR Tg39C1zbsI

Job Description Specific Responsibilities of this Position: This Controls Engineer position supports a machine-intensive, high-volume production environment within a small, specialized engineering team responsible for the rollout and support of next-generation manufacturing technologies. The team will serve as the plant Subject Matter Experts (SMEs) for new Autonomous Mobile Robots (AMRs), and fleet management systems being introduced to improve material flow and production efficiency. This role is ideal for an engineer who enjoys working hands-on with automation, troubleshooting equipment on the production floor, and learning emerging technologies. Employees will receive training on the new AMR platforms and fleet management software and will play a critical role in deploying, optimizing, and supporting these systems throughout the facility. • Respond to carry-over issues from previous shifts and support troubleshooting efforts for automated manufacturing equipment. • Assist maintenance and operations teams with equipment breakdowns, automation faults, and production interruptions. • Utilize PLCs (Allen Bradley and Siemens) primarily for troubleshooting and fault diagnosis. • Review and interpret controls logic to identify root causes of equipment and automation issues. • Troubleshoot Autonomous Mobile Robots (AMRs), including routing, navigation, communication, and material delivery interruptions. • Support AMR fleet management software and related systems to ensure reliable transportation of materials throughout the facility. • Work closely with production, maintenance, and materials teams to maintain uptime and achieve production targets. • Document troubleshooting activities, corrective actions, and continuous improvement opportunities. • Partner with materials, logistics, production, and maintenance teams to identify additional opportunities for automation and robotic integration. • Assist with AMR and Cobot commissioning activities, startup support, validation testing, and production launch efforts. • Contribute to capital projects involving advanced automation, automated material handling systems, robotics, and smart factory initiatives. • Create and maintain automation documentation, process flows, operating procedures, and project records. Why This Role Is Unique • Join a small, highly visible engineering team supporting one of the plant's newest automation initiatives. • Receive specialized training on cutting-edge AMR and fleet management technologies. • Become a plant Subject Matter Expert (SME) for autonomous material movement and robotics. • Play a direct role in modernizing manufacturing operations and shaping how materials are moved throughout the facility. • Work with emerging Industry 4.0 technologies within a Fortune 100 manufacturing environment. Requirements: Focus will be GPS - Engine Assembly and Machining Siemens PLC, HMI, Rockwell Global Common Cameras - Cognex AI, Dalsa, Matrox Fanuc Robot/Cobot AMR OTTO and Bastian Auto Fork Truck Procurement and implementation of new equipment. High focus on factory floor and supporting production and maintenance. Note: Not a desk job; 80-90% on floor. Company DescriptionFounded in 1998 and headquartered in Farmington Hills, MI, Kyyba has a global presence delivering high-quality resources and top-notch recruiting services, enabling businesses to effectively respond to organizational changes and technological advances. At Kyyba, the overall well-being of our employees and their families is important to us. We are proud of our work culture which embodies our core values; incorporating value, passion, excellence, empowerment, and happiness, creates a vibrant and productive atmosphere. We empower our employees with the resources, incentives, and flexibility that they need to support a healthy, balanced, and fulfilling career by providing many valuable benefits and a balanced compensation structure combined with career development. Kyyba is an Equal Opportunity Employer. Kyyba does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other bFounded in 1998 and headquartered in Farmington Hills, MI, Kyyba has a global presence delivering high-quality resources and top-notch recruiting services, enabling businesses to effectively respond to organizational changes and technological advances.\r\n\r\nAt Kyyba, the overall well-being of our employees and their families is important to us. We are proud of our work culture which embodies our core values; incorporating value, passion, excellence, empowerment, and happiness, creates a vibrant and productive atmosphere. We empower our employees with the resources, incentives, and flexibility that they need to support a healthy, balanced, and fulfilling career by providing many valuable benefits and a balanced compensation structure combined with career development.\r\n\r\nKyyba is an Equal Opportunity Employer.\r\n\r\nKyyba does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other b

Job Description Overview Wieland - Creating Value for Generations! Wieland is a global leader in copper and copper alloy manufacturing, processing, and distribution. We provide a large product and service portfolio including power, automotive, ammunition, coinage, construction materials, refrigeration, electronics and many other industries. To us, metal is more than material. Wieland's Cultural Values Wieland’s culture is what makes for a fun and rewarding place to work! As a company, we benefit daily from our employees' knowledge and abilities. With our cultural vision, we place our core values at the heart of everything we do: safety, ambition, optimism, reliability, ownership, diversity, & respect. Wieland is hiring a Tooling & Die Engineer. The Tooling & Die Engineer will be responsible for technical oversight for all tooling and die-related activities supporting press operations. Responsible for tooling design, optimization, troubleshooting, quality improvement, and continuous enhancement of manufacturing processes to support safe operations, customer satisfaction, production efficiency, and business growth. This role is located in Buffalo, NY and will be fully on-site. Hours: Split Shift (6am-4pm/4pm-2am) Base Salary Range: $77,000-$90,000 May be eligible for a variable compensation plan bonus based upon company performance within fiscal year cycle. At Wieland, we recognize that attracting the best talent is key to our strategy and success as a company. As a result, our ranges reflect our good faith estimate to pay fairly. The final pay offered to a successful candidate will be based upon various factors unique to each individual that may include but are not limited to years of experience, industry knowledge, technical skills, education, qualifications, etc. Responsibilities Tooling & Die Engineer Responsibilities: • Design, develop, modify, and optimize tooling, dies, fixtures, and press set-ups to support safe, efficient, and cost-effective manufacturing operations., • Troubleshoot and resolve tooling, die, equipment, and process-related issues that impact safety, quality, productivity, scrap rates, or machine uptime., • Analyze tooling performance and implement design improvements to increase tool life, improve part consistency, reduce downtime, and lower manufacturing costs., • Collaborate closely with Operations, Quality, Maintenance, Production Planning, and Engineering teams to ensure tooling designs support production requirements and customer expectations. This includes any design element collaboration with East Alton tooling designers., • Lead root cause investigations related to product defects, dimensional issues, tooling failures, scrap, and process variation, implementing permanent corrective and preventive actions., • Support new product introductions, customer requirements, and process changes through tooling design, development, validation, and production launch activities., • Coordinate die tryouts, production trials, capability studies, sample submissions, and process validations to ensure tooling meets operational and customer requirements., • Develop and maintain tooling standards, engineering drawings, specifications, setup documentation, and revision controls to ensure accurate and repeatable manufacturing processes., • Review manufacturing processes and tooling designs for manufacturability, quality, safety, reliability, and efficiency improvements., • Monitor tooling performance metrics, including tool life, quality performance, maintenance requirements, downtime, and operating costs, and recommend improvement opportunities., • Provide technical guidance and training to production personnel, setup technicians, and maintenance teams on tooling operation, troubleshooting, and best practices., • Support preventive and predictive maintenance programs by identifying tooling wear patterns and recommending refurbishment, replacement, or redesign strategies., • Ensure all tooling designs comply with customer specifications, engineering standards, product quality requirements, and applicable regulatory requirements., • Participate in continuous improvement initiatives focused on quality enhancement, process stability, waste reduction, productivity improvement, and operational excellence., • Collaborate with suppliers and external toolmakers regarding tooling design, fabrication, modifications, repairs, and performance improvement activities., • Oversee departmental engineering projects including machine installation, equipment modifications, process improvements, capital projects, and decommissioning activities., • Support quality management system requirements including APQP, PPAP, FMEA, Control Plans, corrective actions, and customer quality initiatives where applicable., • Drive operational excellence by aligning tooling design and performance with production throughput, quality objectives, cost targets, and customer delivery expectations., • Properly manage inventory and inventory tracking. Tooling & Die Engineer Qualifications: • Participate in continuous improvement of ISO 14001, ISO 45001, ISO 50001, 9001, IATF 16949 programs and procedures though active participation in the near miss program., • Handles containerizing and labeling universal wastes including batteries and lamps, as well as spent aerosol cans (HW)., • BS Degree- Mechanical Engineering or Technical Areal, • 10 years in stamping environment. AutoCAD proficiency and design background preferred. Qualifications Joining Wieland’s team gives you… • Benefits - Including Medical, Dental, Vision, Disability, Life & more!, • Retirement Savings - 401(k) contribution + match., • Work/Life Balance - Paid Vacation & Holidays., • Growth Opportunities - We have over 9,000+ employees worldwide and 40+ locations in North America alone. Growth opportunities are limitless!, • Wellness Programs – Wieland encourages participation in our unique and personalized approach to wellness, where you are eligible to earn healthcare premium discounts as well as HSA employer contributions based on your status within the program., • Sustainability- Wieland continues to break ground with eco-friendly solutions and push the barrier in sustainability for future generations. Wieland is an equal opportunity and affirmative action employer. We celebrate diversity and are committed to fostering an inclusive environment for all employees. Come join Wieland today and help us continue to build a global corporation we are all proud to belong to.

Job Description Job purpose Sonwil is seeking a highly analytical, hands-on Industrial Engineer to identify efficiencies, improve productivity, reduce costs, and support scalable growth across our distribution, warehousing, transportation, logistics, and support operations. Duties and responsibilities Continuous Improvement • Identify, evaluate, and prioritize opportunities to improve productivity, quality, safety, and cost performance., • Conduct operational assessments and workflow studies across warehousing, transportation, logistics, and support functions., • Lead continuous improvement projects from analysis through implementation and results validation., • Develop and maintain process maps, standard operating procedures, and workflow documentation., • Apply Lean, Six Sigma, Kaizen, and other continuous improvement methodologies to eliminate waste and improve efficiency. Warehouse & Distribution Engineering • Analyze warehouse layouts, slotting strategies, picking methods, travel paths, and storage utilization., • Evaluate labor utilization, staffing models, productivity metrics, and workforce deployment., • Recommend process changes, automation opportunities, equipment improvements, and facility modifications., • Support new customer implementations by designing efficient operational workflows., • Assist with distribution center expansion, relocation, and facility optimization projects. Data Analysis & Reporting • Develop operational dashboards and performance scorecards., • Analyze KPI trends including:, • Throughput, • Labor productivity, • Inventory accuracy, • Cycle times, • Order accuracy, • Dock-to-stock performance, • Utilization rates, • Overtime usage, • Cost per unit metrics, • Conduct time studies and labor standards analysis., • Quantify financial impact of improvement opportunities and implemented changes. Strategic Project Support • Support business growth initiatives through operational modeling and capacity planning., • Partner with Operations, Safety, Transportation, Facilities, Human Resources, Information Technology, and Finance teams on cross-functional initiatives., • Participate in capital expenditure evaluations and ROI analyses., • Assist leadership with long-term facility and network planning. Change Management • Present findings and recommendations to operational and executive leadership., • Facilitate improvement workshops and employee engagement sessions., • Provide training and support during implementation of new processes., • Monitor project outcomes and ensure sustained operational improvements. Qualifications Required • Bachelor's degree in: Industrial Engineering, Manufacturing Engineering, Systems Engineering, Supply Chain Engineering, Operations Management, Related field, • Relevant experience in lieu of degree would also be considered., • 5+ years of experience in industrial engineering, continuous improvement, warehousing, distribution, manufacturing, logistics, or supply chain operations., • Strong analytical and problem-solving skills., • Experience conducting process mapping and workflow analysis., • Advanced Microsoft Excel skills., • Ability to analyze large data sets and develop actionable recommendations, • Proficient with CAD software., • Excellent communication and presentation skills. Preferred • Knowledge of automation technologies, • Experience within a warehouse, distribution, logistics, or 3PL environment., • Lean Six Sigma Green Belt or Black Belt certification., • Experience with: Labor management systems (LMS); Warehouse Management Systems (WMS); Transportation Management Systems (TMS), • Power BI; SQL Safety Requirements • Comply with all posted safety requirements and company safety policies while in headquarters and operational areas., • Wear closed-toed shoes while in warehouse, fulfillment, or other operational areas., • Wear a safety vest and any other required personal protective equipment as directed by company policy, customer requirements, or site-specific procedures. Physical requirements • Ability to stand, walk, and move throughout the facility for extended periods during the assigned shift., • Ability to bend, reach, climb, and perform other physical movements required in a warehouse and fulfillment environment., • Ability to lift, carry, push, or pull up to 50 pounds, as operationally required. Monday-Friday, 8:00am-4:30pm

Job Description Allient Inc. is in growth mode and currently seeking an Applications Engineer to join our team at our Corporate Headquarters in Buffalo, New York! The Applications Engineer conducts and engages with customers on a defined set of applications and solutions to determine requirements related to some manufactured products including motors, drives, gearboxes and other Allient Inc. products and systems. This individual will serve as a liaison between Allient Inc. and its customers, distributors, and reps. Apply now! Responsibilities: • Promotes the value of Allied Motion and Allient Inc. products and services to the customers within the specified geographic territory with the goal of maximizing sales revenue growth and market penetration., • Issue customer quotes and tracks the receipt of new orders, often acts as the day-to-day point of contact., • Develops appropriate sales volume, pricing and standard margin forecasts and is able to capitalize on/compensate for market changes via price changes or share gain., • Serves as a liaison to obtain and provide engineering specifications and related information and expedite material requisitions and production work orders., • Provides technical assistance to interpret, analyze and resolve procurement, manufacturing, installation and field operating problems., • Oversees product installation and trial operations and analyzes and resolves operating and other field problems related to customer installations., • Prepares reports, maintains records, files and a references library incidental to the application of products. Keeps informed of new developments in relation to engineering fields as they relate to the division’s products., • Trains in-house to gain a thorough understanding of Allied Motion and Allient Inc. products, applications, and specifications., • Other duties and/or responsibilities as assigned. Minimum Qualifications: • Bachelor’s degree in Engineering, preferably Mechanical or Electrical., • 3 – 8 years of work and/or intern/co-op experience with technical, manufactured products and systems., • Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations., • Excellent communication skills with the ability to influence others at all levels, • Solid computer skills include MS Office, engineering design software such as Solidworks, MatLab, Altium, etc. Work Environment: • Mostly office-based but may visit the production floor or development lab for observations or conversation., • May be required to operate a computer and/or other office devices., • Occasionally may have to lift and/or transport items weighing between 10 and 40 pounds., • This role requires some travel. Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit www.Allient.com Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training

Job Description This Controls Engineer role supports a machine-intensive, high-volume manufacturing environment and is part of a small, specialized engineering team responsible for deploying and supporting next-generation automation technologies. The team will serve as the plant's Subject Matter Experts (SMEs) for newly introduced Autonomous Mobile Robots (AMRs) and fleet management systems designed to improve material flow and production efficiency. This is an excellent opportunity for an engineer who enjoys hands-on automation work, troubleshooting equipment on the production floor, and learning emerging Industry 4.0 technologies. Comprehensive training on AMR platforms and fleet management software will be provided. Key Responsibilities • Troubleshoot automated manufacturing equipment and support carry-over issues from previous shifts., • Assist maintenance and operations teams with equipment breakdowns, automation faults, and production interruptions., • Use Allen Bradley and Siemens PLCs for troubleshooting and fault diagnosis., • Review controls logic and identify root causes of equipment and automation issues., • Support and troubleshoot AMRs, including navigation, routing, communication, and material delivery systems., • Maintain and support AMR fleet management software and related systems., • Collaborate with production, maintenance, and materials teams to maximize uptime and production performance., • Document troubleshooting activities, corrective actions, and continuous improvement initiatives., • Support commissioning, startup, validation testing, and launch activities for AMRs and collaborative robots (Cobots)., • Participate in capital projects involving robotics, automated material handling systems, and smart factory technologies., • Create and maintain automation documentation, operating procedures, and project records. Why This Role Is Unique • Join a highly visible engineering team driving one of the plant's newest automation initiatives., • Receive specialized training on advanced AMR and fleet management technologies., • Become a key SME for autonomous material movement and robotics., • Play a direct role in modernizing manufacturing operations., • Work with emerging Industry 4.0 technologies in a Fortune 100 manufacturing environment. Technical Focus Areas • GPS – Engine Assembly & Machining, • Siemens PLCs, HMIs, and Rockwell Global Common platforms, • Vision Systems: Cognex AI, Dalsa, and Matrox, • Fanuc Robots and Cobots, • OTTO AMRs and Bastian Automated Fork Trucks, • Procurement and implementation of new manufacturing equipment Work Environment • Approximately 80–90% of time spent on the manufacturing floor, • Hands-on support for production and maintenance operations, • Not a desk-based engineering roleCompany DescriptionG-TECH Services, Inc. is a leading certified recruitment and placement firm that specializes in providing highly skilled staff in technical fields such as engineering, IT, procurement, finance and accounting. We have well-established relationships with some of the most respected companies in the country and know our clients' job requirements and corporate cultures. Once we understand your experience and career aspirations, we aim to connect you with the right opportunity.G-TECH Services, Inc. is a leading certified recruitment and placement firm that specializes in providing highly skilled staff in technical fields such as engineering, IT, procurement, finance and accounting. We have well-established relationships with some of the most respected companies in the country and know our clients' job requirements and corporate cultures. Once we understand your experience and career aspirations, we aim to connect you with the right opportunity.

Experience building, testing, and operating production ETL/ELT pipelines with automated data-quality controls Experience with data modeling, schema migration, source-to-target mapping, lineage, reconciliation, and data-quality automation. Forge requires a Mid Data Engineer to support legacy-to-mode

The platform engineering role requires strong software engineering fundamentals, knowledge of building and operating distributed systems and services. Senior Software Engineer, Cloud Platform - INDIA. StarTree was founded by the core software engineering team and inventors of.

We are seeking an experienced Staff Software Engineer who can operate across platform engineering, application architecture, infrastructure, automation, DevSecOps, and data pipeline systems. Significant experience operating as a senior or staff-level engineer across multiple technical domains, not j

Schulte Hospitality Group is seeking an energetic, experienced, and hands on Maintenance Engineer to join our team! Schulte Hospitality Group is an organization whose success is rooted in its service culture. Our mission is to exude hospitality, be respectful and authentic, prioritize the needs of our internal and external stakeholders above our own, and continuously strive to make a positive impact in all we do. We are passionate hoteliers eager to add like-minded people to our rapidly growing team! What's in it for you? When you join Schulte Hospitality Group you'll be part of a team committed to an inclusive, employee-focused workplace that is invested in your development. We want you to feel engaged, empowered, and excited to grow with us. After all, we believe our greatest and most valuable asset is our people! Schulte Hospitality Group provides a rewarding, fun and flexible work environment, exciting perks, an atmosphere designed to encourage and promote career growth within the company and a robust benefit package including, but not limited to: • Work Today, Get Paid Today, with Daily Pay!, • Free Telemedicine and Virtual Mental Health care access for all Associates starting day one!, • Multiple Health Insurance and Life Insurance options, • 401k Plan + Company Match for eligible associates, • Paid Parental Leave, • Paid Time Off, • Holiday Pay, • Pet Insurance, • Employee Assistance Program, • Schulte Savings Marketplace Discounts on event tickets, electronics, gym memberships + more! Our Company: Schulte Companies is a leading third-party management company with deep, multi-generational experience in all facets of the hospitality industry. We are a diverse team of innovative hoteliers and restauranteurs operating more than 200 locations across 38 states and 3 countries. Our portfolio includes a wide array of reputable brands like Marriott, Hilton, IHG and Hyatt as well as many unique, independent, boutique and lifestyle properties and restaurants. Job Duties and Responsibilities • Oversees the property grounds, public areas and hotel guest rooms, • Conducts preventative maintenance to prevent breakdowns in hotel accommodations, • Paints, replaces electrical accessories, maintains HVAC, • Check fixtures, lighting, and signs for proper operation; maintain an adequate supply of spare parts and light bulbs, • Responds to maintenance orders in a timely manner, • Fulfills work orders in a timely manner, • Completed daily rounds, identifying and reporting problems, • Perform various other duties as assigned Education and Experience • Minimum of three (3) years in a hotel maintenance position preferred, • Preferred but not necessary, one (1) year of college or trade school equivalent in a mechanical, electrical, and/or technical disciplines, • In-depth knowledge of HVAC, plumbing, electrical and general carpentry Knowledge, Skills and Abilities • Basic math skills, • Ability to communicate effectively verbally and in writing, • Ability to exceed expectations of guests and team members, • Excellent time management skills Physical Demands The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Prolonged periods standing and walking., • Able to bend, stretch, push, pull, and move as needed to reach, clean, and service machinery., • Must be able to visually inspect machines., • Must be able to lift and carry up to 50 pounds. *Schulte Hospitality Group is an Equal Opportunity Employer.

Engineer Job Type: Full-time and Part-time positions available Pay: Starting at $19.50 per hour. Pay rate is negotiable based on experience. Work Location: In person Benefits: • Health insurance / 401k, • Paid time off, • 8 Paid holidays, • Marriott Hotel Discounts at any Marriott property in the world!, • 2 Complimentary night hotel stays per year at any Shaner managed property, • 1 Complimentary meal per shift worked, • Located on bus and metro routes. Description: • Be available to work a flexible schedule, including weekends, holidays, and varied shifts., • Handle guest complaints ensuring guest satisfaction., • Maintains standards of quality and cleanliness throughout daily assignments., • Observes all house and safety rules, departmental procedures, and security procedures., • Assist with inventories as scheduled., • Follow maintenance program and cleaning schedule., • Other duties as assigned. Responsibilities: The Engineer will be responsible for upkeep, preventative maintenance and troubleshooting with ice machines, refrigeration units, and air handling units, as well as other general maintenance, in accordance with the standards of Shaner Hotels and the respective franchises. The ideal applicant will be customer service oriented and willing to go the extra mile to make the guest experience one to remember. Requires a strong background in commercial refrigeration and knowledge of ice machines, industrial chiller systems, and air handling units. Also requires basic working knowledge of general maintenance procedures. Full time position with benefits. Evening, weekend, and holiday hours may be required. Qualifications : • Minimum of two years of experience preferably in a hotel; franchised hotel experience a plus. Knowledge of all mechanical equipment critical to the operation of the building; proper chemical handling and disposal., • Ability to prioritize tasks and comply with deadlines for work assignments., • Ability to interact positively with hotel personnel and provide prompt solutions to problems., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedural manuals., • Valid driver's license and clean driving record required. Shaner Hotels has an exciting opportunity at our 205-room Buffalo Marriott LECOM HARBORCENTER. Ideally located in downtown Buffalo's vibrant Canalside Entertainment District, our full-service hotel offers an exceptional hospitality experience in one of Western New York's premier destinations. Conveniently situated just off Interstate 190 and directly connected to KeyBank Center, home of the NHL's Buffalo Sabres, the hotel places guests within walking distance of Buffalo's waterfront attractions, restaurants, and entertainment venues. Niagara Falls, one of the world's most iconic natural wonders, is also just a short drive away. Our upscale hotel features contemporary guest rooms, premium amenities, elegant meeting and event space, a state-of-the-art fitness center, and a signature seventh-floor restaurant and bar offering breathtaking views of Lake Erie and the Buffalo skyline. Whether traveling for business, sports, meetings, or leisure, guests enjoy an exceptional stay backed by Marriott's renowned standards of service. If you're passionate about hospitality and committed to delivering memorable guest experiences, Buffalo Marriott LECOM HARBORCENTER offers an outstanding opportunity to build your career with Shaner Hotels. Join a team dedicated to excellence, teamwork, and professional growth while working at one of Buffalo's premier hospitality destinations. Shaner Hotel Group Shaner Hotels is one of the hospitality industry's leading award-winning hotel owner-operators and management companies. Our growing portfolio includes more than 70 full-service, select-service, extended-stay, and resort properties, representing over 8,000 guest rooms across 14 states and three countries. We proudly partner with many of the world's most recognized hospitality brands, as well as distinctive independent hotels, delivering exceptional guest experiences and operational excellence across every property. Beyond hotel management, Shaner Hotels provides a comprehensive range of hospitality services for investors, hotel owners, and brand partners, including hotel development, design and construction, revenue management, e-commerce, sales and marketing, human resources, accounting, and operational support. Whether you're joining one of our hotels or our corporate team, you'll become part of an organization committed to innovation, professional growth, and delivering outstanding hospitality. At Shaner Hotels, we invest in our people and provide opportunities to build rewarding careers across every area of the hospitality industry. • Job Identification 236805, • Locations 95 Main St, Buffalo, NY, 14203, US (On-site), • Brands Marriott, • Job Category Maintenance