Trabajos operations technician en Buffalo, New YorkCrear alertas

SUMMARY The Acute Registered Nurse provides acute dialysis care and treatment to patients within a hospital environment. This position performs duties as assigned by the Charge Nurse or Acute Manager, including assisting and supervising Patient Care Technicians and Licensed Vocational Nurses. Acute nurses may report directly to an Acute Manager, Administrator or the first line of regional operational management which may be an Area Director, Regional Director, or Vice President of Operations, depending on the region/demographics. Essential Duties and Responsibilities include the following. Other duties and tasks may be assigned. GROWTH · Assist with clinical and operational processes to improve patient health and minimize hospitalizations and rehospitalization. · Ensure patient and treatment charge information and other related data are accurate and submitted appropriately. · Demonstrate effective use of supplies and staff labor hours. · May participate in inventory management, including end-of-month inventory reporting and adherence to company purchasing protocols. · Perform duties as assigned to meet the patient care or operational needs. OUTCOMES · Administer medications as ordered by the physician.. · Provide patient education and follow up as needed. · Assist with program's target goals in meeting quality metrics for patient outcomes in accordance with quality patient care and Company goals. OPERATIONAL READINESS · Knowledge of and comply with federal, state, local laws and regulations, including health care professionals practice act requirements. · Perform duties at all times within limitations established by and in accordance with company policy and procedures, hospital policy, applicable state and federal laws and regulations. · Complete water quality verification and equipment safety checks prior to each treatment, to include second verification as required. · Complete pre and post treatment physical assessments. · Complete pre and post Handoff Communication with hospital nurses. · Initiate and terminate patient treatments to include connecting and disconnecting catheters and cleaning catheter sites. · Set up dialysis machines; report machine problems to biomedical technician and/or Acute Manager as appropriate. · Clean, disinfect and provide quality control of dialysis machines as required by policy and procedures. · Participate in infection control monitoring, implementation, and recording as requested. · Use personal protective equipment as necessary. · Be familiar with emergency equipment and all emergency operational procedures, as required by hospital. OPERATIONAL READINESS (cont.) · Demonstrate effective staffing based on acuity, skill mix and company guidelines. · Ensure provision of dialysis related services such as Hemodialysis, Peritoneal dialysis, Continuous Renal Replacement Therapy (CRRT) and Plasmapheresis (TPE) if contracted to do so. · Participate in all surveys as required. · Ensure nursing care is carried out as directed and treatment is administered in accordance with physician orders. · Ensure appropriate and required information is documented in patient records. · Inform Supervisor, Medical Director or Physician and Hospital Liaison of all incidents, conditions, and concerns related to patient care, staff and patient safety, and in accordance with company policy. · Prepare and maintain dialysis machines and systems per policy: maintain dialysis records, prepare dialysis water treatment system for use according to established procedure and understand technical operations to troubleshoot problems independently. · Notify Bio-Medical Technician regarding machine or water treatment malfunctions, values out of parameters and document as required. PARTNERSHIPS · Communicate results of patient assessment, reassessment, and ongoing monitoring to the physician. · Maintain collaborative working relationship with physicians, nurse practitioners, and other hospital healthcare professionals. · Actively promote GUEST customer service standards; develop effective relationships at all levels of the organization. · Address patient concerns timely and professionally; following hospital policy. STAFF DEVELOPMENT/ RETENTION · Participate in staff meetings as required. Attend and complete all company and hospital required in-service and continuing education. · May delegate tasks to competent licensed and unlicensed staff per applicable state practice act. · Assist with staff training as requested. · Lead staff in team concepts and promote a team effort. Qualifications/Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Requirements include: • Current RN license in applicable state or compact. License must be maintained as current and in good standing., • 12 months or more current nursing experience preferred., • Previous experience in providing nursing care to patients on dialysis preferred., • CPR certification required with hospital approved program, • Ability to pass color screening., • Demonstrated working knowledge of the English language and ability to communicate verbally and in writing., • Must have basic computer skills; proficiency in all USRC clinical applications required within 90 days of hire., • Must meet any practice requirement(s) for the applicable state., • Ability to meet minimum hospital/agency hiring standards which may include additional background clearances and orientation requirements if applicable to the program assigned to for employment. All Full Time employees are eligible for the following benefits: Medical / Pharmacy Dental Vision Voluntary benefits 401k with employer match Virtual Care Life Insurance Voluntary Benefits PTO All Part Time employees are eligible for the following benefits: 401k with employer match * PTO

Company: Gerber Collision & Glass Built with Intent. Driven by YOU. At the Gerber Collision & Glass, our teams work to provide the elite infrastructure and supportive environment you need to Be the Best and outperform at every touchpoint in collision and glass services. As we continue to grow and lead the industry, we ensure you have the resources and the team behind you to move your career forward. Ready to grow with a team that’s built for your success? Apply today. Our Commitment: The Boyd Group welcomes unique talents from all backgrounds and characteristics. We act with integrity and appreciate the diverse perspectives that make our "Greater Team" exceptional. Qualified individuals, including those with disabilities and Protected Veterans, are encouraged to apply. Job Description: Position Overview The Refinish Technician’s primary responsibility includes providing an exceptional and successful customer experience through meticulous refinishing to ensure a quality refinished repair of each customer’s vehicle to restore it back to pre-accident condition. The Refinish Technician thoroughly mixes, color matches and refinishes each vehicle while playing a pivotal role toward Gerber’s promise of speed, quality and customer excellence. The Refinish Technician works in alignment with all team members in achieving the repair facility’s KPIs and is committed to being a dedicated Brand Ambassador of Gerber Collision & Glass at all times. Gerber Collision is dedicated to providing a safe work environment for all of our employees and our Refinish Technicians are provided with PAPR Systems to keep them safe and comfortable. Job Responsibilities: Review body work for quality and completeness as it arrives in the paint department Thoroughly mix, color match, and refinish each vehicle to restore it to pre-accident condition Complete all refinish operations as described in the work order Efficiently use and maintain paint material inventory Consistently utilize all required safety equipment, properly dispose of hazardous waste Attend/collaborate with team during daily production meetings Work in harmony with the production schedule and coworkers to meet deadlines Other duties as assigned Minimum Qualifications: 2-5+ years of collision repair experience Ability to properly complete all steps in the refinishing process Above average quality focus High production capabilities I-CAR or ASE Certifications are a bonus Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job. Benefits That Drive Your Success Gerber offers the comprehensive benefits you expect from an industry leader, including: Annual Paid Time Off (PTO) plans 2 weeks of Paid Parental Leave for Full time Employees who work a minimum of 30 hours per week 6 paid holidays annually Medical, Prescription Drug, Dental & Vision Insurance effective Day 1 401(k) Retirement Plan with company match Employer Paid Short-Term Disability & Life Insurance Additional Voluntary Life Insurance Continuing Education Opportunities Free Prescription or Non-Prescription Safety Glasses annually Annual Voluntary Uniform Stipend Voluntary Daily Pay option available About Us Gerber Collision & Glass has been WOWing customers with our collision repair services for over 80 years. Please visit _ to learn more about our company. AI Disclosure Statement: At The Boyd Group and all affiliated companies, we do not use artificial intelligence (AI) or automated tools to screen, assess, or select applicants for employment. All hiring decisions are made by real people who review each application individually. Compensation Details: FLAT RATE Estimated $65,000 – $125,000+ per year Compensation is commensurate with skill, education, and experience.

Position Description Ryder is hiring an experienced Mid-Level Diesel Technicianin Cheektowaga, New Your — offering weekly pay, excellent benefits, and a Technician career you can feel good about. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/T2James • Hourly Pay: $28.84 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Sign On Bonus: Ryder Pays You $1250 at 30 days and $1250 at 90 days, • Tool Box/Tool Allowance, • Schedule: Tuesday–Saturday, • Hours: Second Shift Tuesday - Friday 3:00 pm – 11:30 pm, Saturday 7:00 am-3:30 pm We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles. Questions? Call Rachel or text “Cheektowaga” to 904-869-3205 to speak with your recruiter today. Apply Here with Ryder Today • On the Job Paid Training, • PPE AND UNIFORMS Issued, • TOOL and BOOT ALLOWANCE provided, • State of the Art Equipment, • Safety is Always the First Priority Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more! EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, required, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • Valid Commercial Driver License (CDL) CLASS A,preferred, • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties, • Performs standard vehicle maintenance, • Performs standard component inspections and repairs, • Performs preventive maintenance, • Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable, • Identifies root cause of basic failures/conditions and perform repairs as required, • Replaces defective components as instructed, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Utilizes key functions of Shop Management System and electronic documentation available, • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT), • Performs other support duties as required to support operations. These could include but are not limited to Service Island support Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 3 weeks ago (5/13/2026 10:47 AM) Requisition ID 2026-201646 Location (Posting Location) : State/Province NY Location (Posting Location) : City CHEEKTOWAGA Location (Posting Location) : Postal Code 14225 Category Technicians/Service Employees4 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000120 Min Pay USD $28.84/Hr. Max Pay USD $28.84/Hr.

Position Description Ryder is hiring an experienced Mid-Level Diesel Technicianin Cheektowaga, New York — offering weekly pay, excellent benefits, and a Technician career you can feel good about. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/HowToT2 • Hourly Pay: $27.84 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Sign On Bonus: Ryder Pays You $1250 at 30 days and $1250 at 90 days, • Tool Box/Tool Allowance, • Schedule: Tuesday–Saturday, • Hours: First Shift 7:00 am – 3:30 pm We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles. Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Questions? Call Rachel or text “Cheektowaga” to 904-869-3205 to speak with your recruiter today. • On the Job Paid Training, • PPE AND UNIFORMS Issued, • TOOL and BOOT ALLOWANCE provided, • State of the Art Equipment, • Safety is Always the First Priority Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more! EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, required, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • Valid Commercial Driver License (CDL) CLASS A,preferred, • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties, • Performs standard vehicle maintenance, • Performs standard component inspections and repairs, • Performs preventive maintenance, • Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable, • Identifies root cause of basic failures/conditions and perform repairs as required, • Replaces defective components as instructed, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Utilizes key functions of Shop Management System and electronic documentation available, • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT), • Performs other support duties as required to support operations. These could include but are not limited to Service Island support Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 10 hours ago (6/4/2026 9:55 AM) Requisition ID 2026-203256 Location (Posting Location) : State/Province NY Location (Posting Location) : City CHEEKTOWAGA Location (Posting Location) : Postal Code 14225 Category Technicians/Service Employees4 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000120 Min Pay USD $27.84/Hr. Max Pay USD $27.84/Hr.

NOW HIRING!! A-Line is seekinga detail-oriented and dependable Pharmacy Clerk to join a fast-paced, production-driven pharmacy environment. In this role, you will support prescription fulfillment operations under the supervision of a licensed Pharmacist. This is an excellent opportunity for individuals with pharmacy, warehouse, or production experience who thrive in structured, high-accuracy environments. Pharmacy Clerk (Onsite) Location: Cheektowaga, NY Pay Rate: $17.50/hour Schedule: Part-Time with Mandatory Overtime Schedule Sunday: 2:00 PM – 10:30 PM Tuesday – Thursday: 6:00 PM – 10:30 PM Friday: 2:00 PM – 10:30 PM Mandatory overtime required based on business needs Key Responsibilities Accurately fill prescription vials with tablets and capsules Retrieve medications from inventory using computer-generated instructions Verify medication type, size, and strength before dispensing Replenish automated dispensing systems with bulk medication Operate handheld scanners to track and manage inventory Perform basic math calculations for prescription quantities Package and prepare prescriptions for shipment, including labeling Maintain a clean, organized, and safe pharmacy workspace Follow all HIPAA guidelines and pharmacy compliance standards Identify, troubleshoot, and escalate workflow or quality issues Support team operations and meet daily production goals Minimum Qualifications High School Diploma or GED required Ability to lift up to 30 lbs and perform physical tasks consistently Comfortable standing and walking for extended periods (8+ hours) Ability to bend, twist, reach, and handle repetitive motions Basic math, reading, and writing skills Strong attention to detail and accuracy Ability to read screens, labels, and use scanning devices Preferred Qualifications Prior pharmacy technician or pharmacy support experience Warehouse, fulfillment, or production environment experience Basic computer proficiency Strong teamwork and communication skills Ability to work independently and adapt to changing priorities Work Environment Climate-controlled facility Fast-paced, production-focused setting Team-oriented with a strong emphasis on accuracy and quality What We’re Looking For Positive attitude and reliability Strong work ethic and ability to meet deadlines High attention to detail and commitment to patient safety Flexibility to work overtime as needed If you're looking to build experience in a pharmacy or healthcare support role and enjoy hands-on, detail-driven work, we encourage you to APPLY NOW!! Dan Lupo / A-Line Staffing

Job Title: Advanced Electronics / Computer Field (ET/FC) Category / Component: Enlisted • Active Overview The Advanced Electronics and Computer Field trains Sailors to maintain, operate, and repair some of the Navy's most sophisticated electronics and computing systems, including radar, communications, navigation, local area networks, weapons fire control, and Aegis combat systems. ETs and FCs form the backbone of a ship's Combat Systems department aboard carriers, cruisers, destroyers, and other surface combatants, as well as at repair and technical activities ashore. Key Responsibilities Serve as an Electronics Technician (ET) or Fire Controlman (FC) after training, based on performance and Navy needs; as an ET, maintain and repair radar, communication, and navigation equipment including transmitters, receivers, displays, and shipboard communications suites such as SATCOM and HF; as an FC, operate, maintain, and repair fire control radars, computers, large screen displays, local area networks, weapon control consoles, and automatic gun systems; troubleshoot complex electronic and electro mechanical faults using technical documentation, test equipment, and established procedures; maintain configuration control, documentation, and logs that support inspections, certifications, and combat system readiness. What to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Work Environment Assignments aboard surface combatants such as aircraft carriers, Aegis cruisers and destroyers, and amphibious ships, as well as at shore based repair and technical facilities; daily work in combat systems spaces, radar rooms, communications centers, electronics shops, and shipboard network spaces; a mix of lab style environments and shipboard spaces with noise, ladders, confined areas, and occasional exposure to heat or weather when working on topside equipment. Pathways, Training & Advancement Recruit Training followed by Apprentice Technical Training at Great Lakes, Illinois, covering basic electronics, circuitry, safety, digital theory, microcomputers, fiber optics, test equipment, and troubleshooting; strand training in either the Fire Controlman or Electronics Technician track, with FCs focusing on radar, ballistics, and fire control basics, and ETs focusing on communications suites and radar systems; follow on A School and platform or system specific C Schools, often with college credit recommended by the American Council on Education; accelerated advancement to E4 upon completion of initial school training and all advancement requirements, with continued promotion based on performance, time in rate, and professional development. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Normal hearing and color perception to work safely with electronic displays and color coded wiring and schematics; strong arithmetic and computing aptitude, with the ability to learn digital theory and complex technical systems; physical strength and manual dexterity to handle equipment, tools, ladders, and shipboard environments. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Job DescriptionDescription: The Manufacturing Deburr Leadman is a skilled deburr technician that can lead a team of deburr employees on quality and packaging of all CNC manufactured product at Snyder Industries. Oversees the shipping/receiving department to ensure correct product is shipping to meet on time delivery targets. Works with internal sales team to prioritize product flow through final inspection. Works with internal quality team on non-conformances found at final inspection. Uses blueprints, ship lists, and computer MRP software to meet customer requirements. Requirements:Essential Duties and Responsibilities The essential functions include, but are not limited to the following: · Blueprint reading, GD&T, Excel, ERP systems. · Understand manufacturing processes: Turning, Milling, Gear cutting, and Heat treating. · Works with Quality Manager on non-conformances found in department · Oversees final tapping operations · Prioritizes product for deburr employees with help with Sales department · Reviews final inspection checklists and visual inspections before packaging products · Performs visual inspection in accordance with customer specifications and ISO 9001:2015 requirements · Utilizes the ship list and working with production analyst to meet delivery needs · Performs diversified deburring and final inspection duties · Operates tools and equipment such as hand grinder, Bridgeport mill, polishing station, and tap tables · Works with engineering team on gauge needs, fixturing, tooling. · Works with quality department with calibration needs · Manages organization of inspection area and raw material warehouse · Complies with safety regulations in all aspects of performing job responsibilities. · Operates computer and enters inspection data · Other Misc. Deburr/Inspection functions Minimum Qualifications (Knowledge, Skills, and Abilities) · Experience and interest in a CNC machining job shop environment · Strong written and verbal communication skills · Attentive to detail; organized · Ability to supervise/lead team · Ability to take initiative, to maintain confidentiality, to meet deadlines, and to work in a team environment · Recommend: MS Office Suite (Outlook, Word, Excel, PowerPoint) · Recommend: Understanding of raw materials: castings, forgings, bar stock, plate materials · Recommend: Understanding of CNC turning, CNC milling, Heat treat (carburization, quench & tempering, induction hardening, welding), and gear cutting (Shaping & Hobbing) · Recommend: CNC Machining background Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. This position operates on the manufacturing floor. Employee will be responsible for looking at all angles of parts in the machine and on pallets. This role routinely uses standard office equipment such as computers, phones, cameras, copiers, and filing cabinets. While performing the duties of this job, the employee is regularly required to stand; walk; use hands; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit. The employee must lift up to fifty (50) lbs. occasionally. Note This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship.

About Ezra Medical Center Ezra Medical Center is a trusted, multi-specialty healthcare provider proudly serving the Brooklyn community for over 18 years. With a commitment to compassionate, high-quality care, our services span across: • Internal Medicine & Pediatrics, • Dental Clinic, • Aqua and Physical Therapy, • Vision Center Learn more about us at: www.ezramedical.org Position Overview We are seeking a dedicated, compassionate, and detail-oriented Clinical Liaison to join our team at Ezra Medical Center. This role is essential in bridging administrative and clinical operations, ensuring a seamless and positive experience for patients while supporting providers in the coordination of care. The ideal candidate thrives in a fast-paced healthcare environment, enjoys patient interaction, and is capable of managing both front-desk responsibilities and clinical coordination with professionalism and efficiency. Key Responsibilities • Greet patients in a professional and friendly manner, creating a positive and welcoming experience., • Manage patient check-in and check-out processes, including scheduling and confirming follow-up appointments., • Answer phone calls promptly and courteously, directing inquiries appropriately., • Identify patient needs, clarify information, and provide solutions or escalate concerns when necessary., • Collect and process co-payments and other applicable fees., • Guide patients on appropriate care under provider direction, including determining urgency and next steps., • Coordinate communication between patients and providers regarding test results, including labs, radiology, and specialist reports., • Process prescription refill requests under provider supervision., • Assist patients with questions regarding medical concerns, past visits, and upcoming appointments., • Support nurses and clinical staff as needed., • Verify insurance eligibility and ensure required referrals and authorizations are obtained., • Input and update patient demographic and insurance information in the EMR system., • Prepare and process forms, referrals, and prior authorizations., • Assist with appointment scheduling, recalls, and follow-up outreach to patients., • Maintain knowledge of services, procedures, and pricing to effectively inform patients., • Adhere to Ezra Medical Center’s compliance program, policies, and procedures. Report any conduct or event that may violate legal or compliance requirements. Uphold Ezra’s values of integrity, compassion, and excellence in patient care. Qualifications Education: • MA/Technician Certificate, High School Diploma, College Diploma, or equivalent experience. Experience: • Experience in a clinical, administrative, or healthcare setting preferred. Skills: • Strong communication and interpersonal skills., • Ability to multitask effectively and work well in a fast-paced environment., • Strong organizational and problem-solving skills., • High level of professionalism and patient-centered approach. Additional Requirements: • Must have experience or certification as a Medical Assistant., • Must also have experience or demonstrated skills in administrative functions, as this role combines both clinical and administrative responsibilities. Benefits As a full-time team member at Ezra Medical Center, you’ll receive a comprehensive benefits package, including: • 401(k), • Dental insurance, • Disability insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Additional Details Work Location: We have two locations where you could potentially work with us. • 1312 38th Street, Brooklyn, NY 11218, • 1278 60th Street, Brooklyn, NY 11219 COVID-19 Protocols: PPE provided, temperature checks, and social distancing enforced Apply Today Are you passionate about patient care and ready to make a meaningful difference in your community?Join Ezra Medical Center as our new Clinical Liaison and become part of a supportive, mission-driven team.

About Ezra Medical Center Ezra Medical Center is a trusted, multi-specialty healthcare provider proudly serving the Brooklyn community for over 18 years. With a commitment to compassionate, high-quality care, our services span across: • Internal Medicine & Pediatrics, • Dental Clinic, • Aqua and Physical Therapy, • Vision Center Learn more about us at: www.ezramedical.org Position Overview We are seeking a dedicated, compassionate, and detail-oriented Medical Assistants to join our clinical team at Ezra Medical Center. This role is essential in supporting our physicians and ensuring that patients receive the highest standard of care in a warm, efficient, and professional environment. The ideal candidate is someone who thrives in a collaborative healthcare setting, enjoys patient interaction, and takes pride in maintaining an organized and well-prepared clinical space. Key Responsibilities Patient Care Support • Escort patients from the waiting area to the examination room., • Take and accurately document vital signs, height, and weight., • Prepare patients for examinations and treatments as directed by providers. Clinical Operations • Maintain exam rooms between visits, ensuring cleanliness and readiness for the next patient., • Manage medical supplies and equipment inventory, ensuring all tools are available and properly maintained., • Perform phlebotomy (draw blood), EKGs, and assist with specimen collection and processing as needed. Administrative Coordination • Answer and route phone calls appropriately; escalate clinical inquiries to nurses or providers as needed., • Assist with scheduling appointments, pre-certifications, referrals, and follow-ups., • Process prior authorizations for medications and support providers with prescription monitoring programs., • Conduct patient recalls for well visits or follow-up appointments. Compliance and Professional Standards • Adhere to Ezra Medical Center’s compliance program, policies, and procedures., • Report any conduct or event that may violate legal or compliance requirements., • Uphold Ezra’s values of integrity, compassion, and excellence in patient care. Qualifications Education: • MA/Technician Certificate, High School Diploma, College Diploma, or equivalent experience. Experience: • Minimum of 1 year of experience in a clinical or healthcare setting preferred. Skills: • Strong communication and interpersonal skills., • Ability to multitask effectively and work well in a fast-paced environment., • Attention to detail and commitment to patient safety and confidentiality., • Bilingual proficiency is a plus, but not required. Benefits As a full-time team member at Ezra Medical Center, you’ll receive a comprehensive benefits package, including: • 401(k), • Dental insurance, • Disability insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Additional Details Work Location: We have three locations where you could potentially work with us. 1. 1312 38th Street, Brooklyn, NY 11218, 2. 1278 60th Street, Brooklyn, NY 11219, 3. 5115 15th Ave, Brooklyn, NY 11219 COVID-19 Protocols: PPE provided, temperature checks, and social distancing enforced Apply Today Are you passionate about patient care and ready to make a meaningful difference in your community? Join Ezra Medical Center as our new Medical Assistant and become part of a supportive, mission-driven team.

Job DescriptionFirst Student Now Hiring an Area Training Manager for the Western New York area. The Area Training Manager is responsible for the day-to-day execution of training programs across multiple locations within a designated area. This role oversees all in-person training schedules in partnership with the locations, manages a team of full-time and part-time trainers in their training function and ensures seamless integration of training processes with operations and safety teams. The Area Training Manager is also responsible for partnering with CX Specialists to enhance candidate experience, ensuring training compliance, and driving candidate throughput to successful onboarding. Major Responsibilities • Training Program Management: Execute company training programs at the area level, ensuring consistency with company standards and alignment with operating procedures., • Partner with location managers to facilitate efficient and effective training delivery for new hires and ongoing safety training., • Trainer Supervision and Scheduling: Directly manage all trainers within the area, overseeing their schedules to optimize coverage for all training activities., • Ensure trainers maintain appropriate certifications and compliance, conducting regular evaluations and coaching sessions as needed., • Balance trainer workload, adjusting schedules as necessary to meet training demands while managing trainer hours and maintaining budget oversight in partnership with the locations in the operating area., • Candidate Engagement and Onboarding: Work closely with CX Specialists to monitor candidate progress and ensure a positive onboarding experience., • Coordinate with trainers and CX Specialists to provide clear and consistent communication to candidates regarding their training schedules and expectations., • Collaboration with Operations and Safety Teams: Partner with local operations and safety teams to align training programs with safety initiatives and operational goals., • Provide support for local safety training and ensure training practices meet safety standards and regulations., • Act as a key contact for location managers regarding training needs and resource allocation., • Compliance and Reporting: Ensure all training activities comply with federal, state, and local regulations, as well as company policies., • Maintain accurate training records and documentation, monitoring trainer and candidate compliance., • Act as primary documentation manager for all training documentation, ensuring documentation compliance., • Ensure all FMCSA requirements for the Training Provider Registry are entered in compliance., • Prepare reports on training activities, candidate progress, and trainer performance, providing data-driven insights for continuous improvement., • Training Excellence and Quality Control: Monitor training delivery and provide ongoing feedback to trainers to maintain high-quality training standards., • Support the continuous improvement of training content and methods by collaborating with the Region Training Manager and other stakeholders., • Address any issues impacting training quality, making necessary adjustments to meet company expectations., • Resource Planning and Allocation: Ensure appropriate trainer staffing levels at each location to meet training needs, assisting with recruitment and onboarding of new trainers as necessary., • Plan and allocate training resources effectively to support training schedules and location-specific requirements., • Direct Support for Training Programs: Be hands-on in supporting training sessions when necessary, providing backup coverage and assistance during peak periods or trainer absences., • Maintain an active presence across locations, conducting site visits as needed to observe training sessions and engage with trainers and trainees., • Additional Duties: Perform other duties as assigned to support the team and company's goals. Minimum Education or Certifications Required • High school diploma or equivalent required; Bachelor's degree preferred. Minimum Experience or Skills Required • 3 years of management experience, preferably in training or a related field., • 3 years of experience in transportation, safety, or training operations., • Knowledge of federal, state, and local training regulations., • Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint) and familiarity with training management systems., • Strong communication and interpersonal skills, with the ability to manage relationships across multiple levels., • Proven ability to prioritize tasks and manage time effectively in a dynamic environment., • Demonstrated consistent attendance and punctuality., • Ability to travel between locations as needed. Physical Requirements and Working Conditions • Be onsite at the locations 4 days a week, • Ability to move around office and company facilities, use standard office equipment, and communicate effectively in person or by phone., • Must be able to travel up to 50% for training site visits and oversight., • May require driving a company or personal vehicle for location visits and training support. Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management's assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf.

Job Description POSITION SUMMARY: The Preventive Maintenance Technician performs preventive maintenance service on all types of trucks and/or equipment, including diesel and non-diesel, to maximize safe and productive operations. The primary purpose of the Preventative Maintenance Technician is to focus on preventative maintenance and other mechanic type tasks and services. This position is expected to be second shift (3:00 - 11:30 PM). PRINCIPAL RESPONSIBLITIES: • Performs preventative maintenance and basic repairs on electrical, diesel and gasoline vehicles, including compactor, excavator, wheel loader, and other vehicles to maximize safe and productive operations., • Inspects truck and/or heavy equipment for condition, operation and fluid levels. Identifies and designates problems with equipment., • Power washes equipment as is necessary., • Checks, fills and changes appropriate fluids for all vehicle parts including engine, transmission, differentials, final drives, pump drives and hubs., • Greases, oils and lubricates components during preventive maintenance service., • Performs adjustments to various systems during preventive maintenance service., • Maintains and/or changes air, oil, coolant and fuel filters., • Performs cooling systems maintenance., • Checks safety equipment on truck and/or equipment., • Inspects tires, • Completes paperwork associated with preventive maintenance services and repairing equipment, documenting parts usage and accounting for applied times (i.e., work order times compared to time card times)., • Drives truck and/or equipment in and out of repair area., • Follows all safety policies and procedures., • Performs other job-related duties as assigned. QUALIFICATIONS: • Basic computer skills as demonstrated by knowledge of and ability to use MS Excel and word processing applications., • High school diploma or G.E.D., • Mechanical Trade School certificate or degree., • NYS Inspectors License (Preferred) Benefits at Modern: • Medical, Dental and Vision Coverage, • Retirement Savings with Employer Match, • Health Savings Accounts, • Voluntary Insurance Products, • Employee Assistance Program, • Paid Time Off, • Paid Holidays, • Direct Deposit/Electronic Paystubs, • Discount Memberships, • Company-Sponsored Events Modern Corporation is an Equal Opportunity Employer and is committed to providing all applicants and employees the right to equal employment opportunities with regards to all aspects of the employment relationship. The Company will not engage in discriminatory practices against any applicant for employment or employee of the Company because of race, color, religion, marital status, familial status, military or veteran status, disability (including pregnancy-related conditions), creed, sex, sexual orientation, gender, gender identity or expression, transgender status, age, national origin, ancestry, domestic violence victim status, genetic predisposition or carrier status, genetic information, known relationship or association with any member of a protected class, or any other legally protected class or status. #ZR

Job DescriptionBenefits: • 401(k), • Competitive salary, • Free uniforms, • Paid time off Belt Shop Fabricator - Belt Technician Responsibilities: • Fabricate and repair conveyor belts, • Inspect completed fabricated belts for order accuracy to meet industry specifications, • Install and vulcanize lightweight and heavyweight conveyor belting, • Maintain work area in a neat and orderly condition, • Work in a manner that ensures the safety of everyone involved. Exercise proper care in the use of tools and equipment, • Detect and report defective equipment, material and any improper operations or unusual conditions, • Observe all safety rules and regulations; maintain work area in a neat and orderly condition, • Required to wear Personal Protection Equipment (PPE), • Other duties as assignedQualification:, • Measure and cut material Must be able to MEASURE ACCURATELY, both imperial and metric, • Basic Math skills - add, subtract, multiply, and divide in units of linear measure, using whole numbers, fractions, and decimals with a calculator, • Strong mechanical background a plus, • Required to read and write in English, • Material handling with forklift, pallet jack and hand truck., • High attention to detailCompensation:, • Starting wage negotiable based on experience. Experienced Belting Fabricator will be considered for additional compensation., • Performance based wage increases., • Benefits include: medical, 401k, profit sharing, paid vacation/holidays and bonus programs.

Job Description Aegeus Inspection is a national leader in the Testing, Inspection, and Certification (TIC) sector, delivering non-destructive testing (NDT), inspection, and specialized workforce solutions across the aerospace, power, and oil & gas industries. We are a trusted partner dedicated to enhancing the quality, safety, and reliability of our clients’ assets and infrastructure while protecting the integrity of their operations. Our success is driven by advanced technical expertise, an innovative mindset, and a team committed to operational excellence. With a strong and growing national footprint, Aegeus continues to expand in key markets, attracting top talent and creating opportunities for individuals who want to build meaningful, impactful careers. Equal Opportunity Employer/Protected Veteran/Disability. Pay range for this job level is a general guideline only for States that enforces pay transparency and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, certifications, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. Position Overview • The main function of this position is overseeing and performing machining services including saw cutting, handling of pipe and other materials, sectioning, and other laboratory sample preparation and for testing. Must be a US Citizen This position offers a $500.00 sign on bonus too! This is a local position to Williamsville, NY. The main duties include:, • Responsible for pipe and materials handling upon receipt from the client., • Responsible to help support shipping/receiving by unloading or loading delivery trucks, • Maintains equipment used in the laboratory and responsible for the day-to-day operation of the lab facility including, but not limited to, scheduling, equipment maintenance, managing supplies, and scheduling equipment calibration., • Participates in laboratory inspections providing operation of equipment during inspection., • Observes and consults with project managers to ensure specified techniques are used. Company Perks - 100% Aegeus paid: Vision, Life, and Disability Insurance, • Medical & Dental Insurance - 401K plan (with Company Matching), • Vacation Paid Time Off, • Personal/Sick Pay Equal Employment Opportunity/M/F/disability/protected veteran status. The Pay Range for this position is $22-27/hr. Pay range for this job level is a general guideline only for States that enforces pay transparency and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, certifications, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. Position Purpose The main function of this position is overseeing and performing machining services including saw cutting, handling of pipe and other materials, sectioning, and other laboratory sample preparation and for testing. Duties and Responsibilities • Responsible for pipe and materials handling upon receipt from the client., • Responsible to help support shipping/receiving by unloading or loading delivery trucks, • Maintains equipment used in the laboratory and responsible for the day-to-day operation of the lab facility including, but not limited to, scheduling, equipment maintenance, managing supplies, and scheduling equipment calibration., • Participates in laboratory inspections providing operation of equipment during inspection., • Observes and consults with project managers to ensure specified techniques are used., • Perform work safely (wearing appropriate PPE and following safety procedures)., • Assist the machinist with basic machining of test samples when time permits., • Represent company at industry conferences and committees as and when required., • All other duties as assigned. Knowledge and Skills • General knowledge of machining techniques., • A sense of urgency, good attention to detail, and follow-through., • Demonstrates a systematic approach in carrying out assignments., • Ability to complete forklift training and certification within 3 weeks of being hired., • Firmly adheres to the values and ethics of Aegeus Inspection Solutions. Exhibits honesty, discretion, and sound judgment., • Maintains a positive “can do” outlook, rebounds quickly from frustrations and unpleasantness, and maintains composure and friendly demeanor while dealing with stressful situations., • Basic computer skills, specifically Microsoft Word, Outlook and Excel., • Ability to organize, prioritize, and perform multiple tasks with minimal supervision., • Ability to multi-task and properly execute multiple simultaneous assignments., • Ability to communicate and cooperate with diverse groups of people., • Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Education and Work Experience • Associate’s Degree in any discipline or Laboratory Technician based vocational school Certificate / Degree preferred., • High school diploma or equivalent GED, • Must have a valid driver’s license., • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. Certificates and Licenses Required • Ability to achieve ASNT Level II certification in Visual Inspection within 1 year of being hired., • Must meet minimum company requirements to operate a company vehicle and be eligible for coverage under Company insurance program. Physical Activities and Requirements • The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects., • The ability to see details at close range (within a few feet of the observer)., • The ability to bend, stretch, twist, or reach with your body, arms, and/or legs., • The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations)., • The ability to listen to and understand information and ideas presented through spoken words and sentences., • The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position., • The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem., • The ability to listen to and understand information and ideas presented through spoken words and sentences., • The ability to communicate information and ideas in speaking so others will understand., • The ability to read and understand information and ideas presented in writing., • The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects., • The ability to quickly respond (with the hand, finger, or foot) to a signal (sound, light, picture) when it appears., • The ability to judge which of several objects is closer or farther away from you, or to judge the distance between you and an object., • Stooping: Bending body downward and forward by bending spine at the waist. This factor is important if it occurs to a considerable degree and requires full use of the lower extremities and back muscles., • Reaching: Extending hand(s) and arm(s) in any direction, • Standing: Remaining upright on the feet, particularly for sustained periods of time, • Sitting: Remaining sitting, particularly for sustained periods of time, • Walking: Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another., • Dexterity: Picking, pinching, typing or otherwise working, primarily with fingers rather than with whole hand or arm as in handling., • Grasping: Applying pressure to an object with the fingers and palm., • Feeling: Perceiving attributes of objects, such as size, shape, temperature or texture by touching with skin, particularly that of fingertips., • Talking: Expressing or exchanging ideas by means of the spoken word; those activities where detailed or important spoken instructions must be conveyed to other workers accurately, loudly, or quickly., • Hearing: Perceiving the nature of sounds at normal speaking levels with or without correction, and having the ability to receive detailed information through oral communication, and making fine discriminations in sound., • Repetitive motions: Making substantial movements (motions) of the wrists, hands, and/or fingers., • In compliance with American with Disabilities Act (ADA), Aegeus will make reasonable accommodations that are appropriate and consistent within our legal obligations. Working Conditions • The physical environment requires the employee to work both inside and outside in heat/cold, wet/humid, and dry/arid conditions in temperature extremes and inclement weather. Frequently required to use personal protective equipment to prevent exposure to hazardous materials and working environment, • May occasionally walk on slippery or uneven surfaces, • The noise level in the work environment is frequently loud when working on project site., • Overtime required during the week and weekend with work volume, • Maybe requested to travel, nationally, up to 20% of the time.

Job DescriptionJob Requirements The Service Operations Manager must have the ability to ensure high-level customer satisfaction and company profitability through customer consultation, technician leadership, service sales and coordination. Work Experience Bachelor's degree in Mechanical Engineering, Electronics, Electrical Engineering or Information Technology. At least five (5) years' experience working with mechanical and/or control systems. Advanced knowledge of the construction or HVAC industry, control theory, automatic temperature controls, building automation systems and other building sub-systems required. Additional skills preferred but not required Three (3) years' supervisory experience. Demonstrated experience in the integration of low voltage building sub-systems using various industry protocols (i.e. LON, BacNet, etc) preferred. Benefits Advance your career with Stark Tech, a leader in facilities and energy solutions. We specialize in integrating systems, providing energy-efficient equipment and services, and supporting sustainability through innovative technologies like renewable natural gas conversion and energy storage solutions. At Stark Tech, we prioritize employee well-being and offer comprehensive benefits including paid time off, 401(k) with employer match, medical coverage, wellness programs, and career development opportunities. Join our fast-growing, customer-focused organization where your skills and dedication will be valued and rewarded with competitive pay and a positive work environment.

Job Description Overview Trailer Technician/Mechanic – Buffalo, NY $28.00 - $30.00 hr | Weekly Pay | Full Benefits within 30 Days Amerit Fleet Solutions, a leader in fleet maintenance across the U.S., is hiring a skilled Trailer Technician/Mechanic to join our team in Buffalo, NY. If you enjoy troubleshooting mechanical issues and keeping fleet vehicles running reliably, this is a great opportunity to grow your career with a stable national company. Pay & Schedule Pay: $27.00 – $30.00/hour (based on experience) Pay Frequency: Weekly pay – every Friday Schedule: Monday - Friday 11:00pm-7:30am OR Monday - Friday 3:00pm-11:30pm Why Technicians Choose Amerit ✔ Weekly Pay – Reliable paycheck every Friday ✔ Benefits Start Fast – Medical, dental, vision within 30 days ✔ 401(k) Match – Plan for your future ✔ Paid Time Off – Vacation, holidays, and sick time ✔ Boot Allowance & Safety Gear Reimbursement ✔ Training Through Amerit University ✔ ASE Certification Reimbursement & Bonuses ✔ Employee Referral Bonuses (Up to $500) ✔ Career Advancement Opportunities Nationwide What You’ll Do • Perform preventive maintenance and repairs on trailers, • Diagnose mechanical and electrical issues, • Conduct inspections to ensure vehicles meet safety and compliance standards, • Accurately document repairs and complete work orders, • Maintain a clean and organized work area, including your tools and equipment, • Follow all safety procedures and company policies, • Collaborate with supervisors and team members to support fleet operations What We’re Looking For • 2+ years’ of hands-on experience performing class 7 - 8 trailer maintenance and repairs, • Strong diagnostic and troubleshooting skills, • Valid driver’s license, • Ability to own and maintain the personal tools and toolbox required for the role, • Ability to work effectively both independently and as part of a team, • Willingness and ability to meet the physical demands of the position (detailed below), • Must be eligible to pass standard pre-employment screenings, including drug screen and DOT physical (if required) Working Conditions This role involves working in a mobile, outside and/or shop environment with exposure to dust, diesel fumes, noise, and mechanical materials such as oils and greases. Technicians must be able to perform essential job functions that include frequent movement such as standing, walking, climbing, bending, and sitting for extended periods, as well as lifting heavy objects and accessing tight or confined spaces. This position requires regular use of hands to grasp, reach, handle, and operate tools and equipment. Technicians may be required to work at heights using ladders or elevated platforms and must be able to safely perform duties in various weather conditions. Due to the active work environment and movement of large vehicles, the ability to see and hear sufficiently to safely navigate the workspace is required. Reasonable accommodations may be made to support individuals with disabilities in performing essential job functions. Ready to Join a Growing Team? Apply today to join Amerit Fleet Solutions and build a career with a company that values safety, reliability, and skilled technicians. https://www.ameritfleetsolutions.com/careers/easy-apply #Mechanic #Hiring #TrailerMechanic #NowHiring #TrailerTechnicianCareer #MechanicJobs #TrailerTechnician INDSA

Job Description About the Practice Buffalo Endovascular & Vascular Surgical Associates (BEVSA) is a specialized vascular surgery practice serving the Buffalo/Western New York region. This position is based out of Access Care Vascular & Wound Health, our outpatient center delivering care across three integrated service lines: advanced wound care, hyperbaric oxygen therapy (HBOT), and vascular diagnostics. We are growing and seeking a motivated, clinically skilled midlevel provider to join our collaborative team of vascular surgeons, nurses, and allied health professionals. Position Overview This is a full-time outpatient position spanning all three clinical service lines: vascular patient care, wound care, and hyperbaric oxygen therapy. You will work closely with our vascular surgeons and clinical staff to deliver comprehensive, coordinated care to a complex patient population. Clinical Responsibilities Vascular Patient Care • Evaluation and management of vascular patients including peripheral artery disease (PAD), chronic venous insufficiency, and arterial insufficiency, • Ankle-brachial index (ABI) interpretation and comprehensive vascular assessment, • Antiplatelet and anticoagulation therapy management, • Coordination of complex vascular cases with supervising vascular surgeons, • Clinical documentation support for prior authorizations, peer-to-peer reviews, and insurance appeals Wound Care • Wound assessment, measurement, photography, and CMS-compliant documentation, • Sharp debridement procedures, • Dressing selection, application, and wound product management, • Compression therapy evaluation and management, • Wound culture interpretation and antibiotic treatment decision-making, • Wound VAC therapy oversight Hyperbaric Oxygen Therapy (HBOT) • Hyperbaric consults: evaluate patients for HBOT candidacy, provide patient education on the treatment process, and obtain medical clearance, • HBOT program supervision and clinical oversight, • Staff supervision during HBOT treatment sessions, • Train to become a certified hyperbaric technician and provide chamber coverage when needed, • HBOT coverage coordination and ongoing program management Clinic Operations & Leadership • Wound care center team coordination including oversight of Medical Assistant staff; wound care education covering dressing selection, wound measurement, documentation standards, and wound photography, • Patient flow management and clinical workflow optimization, • Participation in organizational and practice-wide meetings, • EHR documentation, note completion, quality assurance, and staff onboarding to documentation standards (MEDENT), • Provider-to-staff triage communication and lab/imaging result routing, • Clinical skills training and competency oversight for support staff Qualifications Required • Active PA-C or NP licensure in New York State, • Graduate degree from an accredited PA or NP program, • BLS/ACLS certification, • Strong clinical documentation skills and attention to detail, • Ability to function independently and as part of a multidisciplinary team Preferred (but not required — we will train the right candidate) • Experience in vascular surgery, wound care, or hyperbaric medicine, • Familiarity with ABI testing, sharp debridement, and wound VAC therapy, • Current DEA registration (or eligibility to obtain), • Experience with prior authorizations and insurance peer-to-peer processes, • Comfort with EMR-based documentation workflows Compensation & Benefits We offer a competitive compensation and benefits package designed to support your professional and personal wellbeing: Compensation • Competitive base salary commensurate with experience and qualifications, • Performance-based incentive opportunity, • Retention bonus for eligible candidates Health & Wellness Benefits • Medical, dental, and vision insurance, • Employer contribution toward health insurance premiums, • Life and disability insurance Retirement & Financial • 401(k) with employer matching Time Off & Scheduling • Paid time off (PTO), • Paid holidays, • Consistent outpatient schedule — no overnight call, no hospital rounding Professional Development • Training provided in wound care, HBOT, and vascular diagnostics — no prior subspecialty experience required, • Malpractice/professional liability insurance coverage (occurrence-based), • Opportunities for clinical leadership and program development as the practice grows Why Join Our Team • Work alongside experienced vascular surgeons in a collaborative, supportive environment, • Outpatient only — weekdays, no overnight call or hospital rounding, • Broad clinical scope across vascular, wound care, and HBOT — no two days are the same, • Opportunity to develop subspecialty expertise with full training provided, • Be part of a team that genuinely cares about patient outcomes and each other BEVSA Vascular & Wound Health is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Company DescriptionBUFFALO ENDOVASCULAR & VASCULAR SURGICAL ASSOCIATES (BEVSA)BUFFALO ENDOVASCULAR & VASCULAR SURGICAL ASSOCIATES (BEVSA)

Job Description Position Summary Mural Group is partnering with a leading specialty metals manufacturer known for producing high-performance stainless and alloy products for critical industrial applications to hire a Maintenance Manager. This role will lead all maintenance and reliability efforts within a fast-paced manufacturing facility, with a focus on maximizing equipment uptime, improving preventative maintenance programs, and building a high-performing technician team. You will play a key role in driving operational efficiency, reducing downtime, and partnering closely with production to ensure consistent, high-quality output. This is a hands-on leadership role for someone who thrives in a plant environment and takes ownership of both people and equipment performance. Key Responsibilities • Lead and manage all maintenance operations across production equipment, utilities, and facility systems, • Develop and execute preventive and predictive maintenance programs to minimize downtime, • Drive root cause analysis and corrective actions for equipment failures and recurring issues, • Oversee troubleshooting and repair of mechanical, electrical, pneumatic, and hydraulic systems, • Manage and develop a team of maintenance technicians, including scheduling, training, and performance management, • Partner with production and engineering teams to improve equipment reliability and efficiency, • Track and analyze maintenance KPIs including uptime, MTBF, and MTTR, • Ensure proper inventory management of spare parts and critical components, • Maintain CMMS systems for work orders, asset tracking, and maintenance planning, • Support capital projects including installation, commissioning, and equipment upgrades, • Ensure compliance with all safety regulations and maintenance best practices Required Qualifications • 5+ years of maintenance leadership experience in a manufacturing environment, • Strong knowledge of mechanical, electrical, and automated systems, • Experience implementing preventive and predictive maintenance programs, • Proven leadership experience managing maintenance teams in a fast-paced setting, • Experience with CMMS platforms and maintenance planning systems, • Strong troubleshooting and root cause analysis skills, • Ability to prioritize and manage multiple competing demands Preferred Qualifications • Experience in high-speed production environments (food & beverage, packaging, or CPG), • Familiarity with PLC troubleshooting and industrial automation systems, • Lean manufacturing or continuous improvement experience, • Technical certification or degree in engineering, maintenance, or related field

Job Description Join Kistler – A Global Leader in Measurement Technology! At Kistler, we’re revolutionizing industries with our cutting-edge dynamic measurement technology, helping customers optimize products and processes. From automobile development to smart factories, our Swiss-designed sensor solutions are driving the future of electrified drive technology, industrial automation, and emission reduction. Purpose of the Position A Production Technician at Kistler Instrument Corp performs all the assembly, testing, calibration, and/or inspection operations required to manufacture Kistler products. They work under guidance of the Production Supervisor and collaborate closely with production engineering. Main Tasks • Assemble and test products according to product documentation (assembly instructions, test procedures, engineering drawings, etc.), • Perform assembly operations such as soldering, mechanical fastening, and/or adhesive bonding under a microscope using small tools (tweezers, soldering irons, etc.), • Ensure product quality by performing visual inspections, functional tests, and/or calibrations, • Basic operation of equipment necessary to assemble, test, and/or calibrate transducers (welders, bead blasters, shakers, oscilloscopes, etc.) Requirements Profile • Ability to organize daily work activities according to supervisor instruction, • Work independently or in a team environment, • High School diploma, GED, or equivalent is required, • Strong communication, interpersonal, and teamwork skills, • See through and work at a binocular microscope for extended periods Why Kistler? At Kistler, we value your expertise and offer opportunities for professional growth in a global environment. Our competitive benefits package includes: • Medical, dental, vision, life, and disability coverage, • 401(k) plan with a 4% company match, • Generous personal and vacation time Join a team that’s shaping the future of measurement technology. We look forward to meeting you! Kistler Instrument Corporation is an Equal Opportunity Employer.

Job Description Overview Join a Leader in Home Healthcare At Rotech Healthcare Inc., we’re more than a medical equipment provider—we’re a trusted partner in patient care. As a national leader in ventilators, oxygen therapy, sleep apnea treatment, wound care, diabetic solutions, and other home medical equipment, we empower patients to manage their health from the comfort of home. With hundreds of locations across 45 states, our team delivers high-quality products, exceptional service, and compassionate support that helps patients live more comfortably, independently, and actively. Whether you're a clinician, technician, or healthcare administrator, your work at Rotech directly improves lives. Explore more about our mission and services at Rotech.com. Responsibilities Location Manager – Home Healthcare Operations Lead with Purpose. Drive Performance. Improve Lives. Rotech Healthcare Inc. is seeking an experienced and mission-driven Location Manager to oversee daily operations at one of our home healthcare branches. If you have a background in healthcare management—especially in respiratory therapy or DME—and are passionate about delivering exceptional patient care through operational excellence, this is your opportunity to lead a high-impact team. In the State of NY, this position pays between $62,353.20/yr. – $65,000/yr., depending on related experience, plus bonus opportunity. Essential Job Duties and Responsibilities (Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.) • Manage day-to-day operations of the location on-site, ensuring compliance, efficiency, and profitability., • Lead and develop a team focused on delivering respiratory and DME services to patients in their homes., • Maintain strong relationships with referral sources, physicians, and healthcare partners., • Oversee inventory control, billing documentation, and regulatory compliance (Medicare, Medicaid, private insurance)., • Monitor KPIs including revenue, expenses, A/R aging, and service delivery metrics., • Conduct staff training, performance evaluations, and succession planning., • Ensure timely and accurate patient documentation, including Certificates of Medical Necessity (CMNs)., • Collaborate with regional leadership and corporate departments to meet strategic goals., • Participate in quality improvement initiatives and JCAHO compliance programs., • May assist with deliveries, on-call coverage, and patient support as needed.Why Join Rotech?, • Be part of a national leader in home respiratory and medical equipment services., • Lead a team that makes a real difference in patients’ lives., • Enjoy competitive compensation, bonus opportunities, and comprehensive benefits., • Grow your career in a supportive, mission-driven environment. Ready to lead with impact? Apply today and help us deliver care that starts at home. Qualifications Employment is contingent on • Background check (company-wide). Results will not be used automatically to disqualify individuals. Instead, the Company will conduct an individualized assessment that considers the duties of the position, the nature and timing of the offense, and any evidence of rehabilitation, in accordance with applicable laws., • Drug screen (when applicable for the position), • Compliance with healthcare facility credentialing process (when applicable for the position), • Valid driver’s license in state of residence with a clean driving record (when applicable for the position) Required Education and/or Experience • High school diploma or GED equivalent State-Specific Requirements: • Florida: Must have two years of experience in business management or a college degree in business or a healthcare-related field, • North Carolina: Must hold a Bachelor's degree in health science, business administration, or a related field, plus at least one year of documented supervisory or management experience in home care or related health programs, • Wyoming: Must have a minimum of two years of full-time managerial or supervisory experience in a pharmacy or wholesale distributorPreferred Education and/or Experience, • Bachelor’s degree in Business, Healthcare Administration, or a related field (or equivalent experience in HME, home health, or healthcare operations) • Experience with medical equipment, respiratory therapy, or DME services, • Familiarity with medical billing, insurance reimbursement, and regulatory compliance, • Background in healthcare administration or medical record management, • At least four years of related work experience, • Working knowledge of medical terminologySkills and Competencies, • Strong attention to detail and ability to multi-task effectively, • Excellent verbal and written communication skills in English, • Ability to interpret and respond to various forms of communication (verbal, written, visual), • Maintain confidentiality and handle sensitive information with discretion, • Demonstrated problem-solving, time management, and organizational skills, • Capable of working independently and collaboratively within a teamTechnical Proficiency, • Proficient in Microsoft Office (Outlook, Word, Excel), • Comfortable with email communication, internet research, and using office equipment (fax, copier, printer, phone, computer/tablet)Physical Requirements, • Ability to lift and transport equipment as needed, • May be required to drive a company vehicle, participate in on-call rotations, and make home deliveries, • Must be able to sit, stand, walk, talk, and listen for extended periods, • Requires close vision for reading small print on screens and paperwork

Job Description Monroe Tractor is a well-known and respected construction equipment and agricultural equipment dealer with over 75 years of experience servicing the northeastern US. With 18 locations throughout New York, Pennsylvania, Vermont, Connecticut, and Massachusetts, we pride ourselves on providing best-in-class sales and support to over 15,000 hardworking customers. Since our founding in 1951, the industries we serve have been transformed by the technologies, equipment, and capabilities undreamed of decades ago. But the people we serve haven't changed, and neither have we. We're still a family-owned business! We're looking for a skilled Diesel Technician with a strong background in heavy equipment. In this role, you'll provide professional, safe, and efficient support for our branch, handling everything from routine maintenance to complex diesel engine repairs. This position is part of the union Local 17C. Qualifications • Prior experience in heavy construction equipment or agriculture equipment is preferred., • Strong independent work ethic but also able to work collaboratively with a team., • Excellent customer service skills; a builder of relationships., • Clear and concise communications., • A strong sense of urgency, focusing on time., • Computer skills., • Valid Drivers License and clean driving record is required., • Ability to independently lift between 50-75 pounds. Responsibilities • Provide technical service to equipment., • Read job orders., • Observe and listen to equipment in operation to resolve malfunction issues and execute work procedures effectively., • Follow checklists to ensure all critical parts are examined., • Examine protective guards, loose bolts, and specified safety devices on trucks, and adjust as needed., • Test-drive vehicles to ensure that they run smoothly., • Tag all warranty parts and return them to the warranty clerk., • Attend training classes and keep tabs on factory technical bulletins., • Develop and maintain positive relationships with customers to increase overall customer happiness., • Properly complete the service and/or repairs assigned by the supervisor., • Complete all work according to the applicable safety requirements and published procedures., • Participate in, and utilize to the best of one's abilities, technical training as assigned by management., • Maintain your designated workspace in an organized and clean manner., • Ensure guest vehicles are returned as clean as they were before being serviced., • Show the utmost courtesy to all guests, visitors, and dealership personnel., • Make every effort to achieve the production objectives set by management., • Adhere to the manufacturer's policies and procedures as they relate to labor operations, time, and repair order documentation when performing warranty repairs and torque specifications., • Any other duties as outlined by the Service Supervisor and, or management. Technician Benefits • Annual Tool/Shoe Allowance., • Uniforms provided., • Discounts on products and services., • Continued education, manufacturer hands-on and web-based training. Union Health & Welfare, and Pension package included: • Lifetime Career, • Union Representation, • Good Wages, • Family Health Care, • Health Reimbursement Account Pension/Retirement Plan Training We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Pay is commensurate with the applicant's experience, as it relates to the position. Pay Transparency$23.03—$42.02 USD

Job DescriptionJob Requirements The ideal candidate will be responsible for providing engineered drawings for HVAC control systems. You should be able to review specifications and contract drawings for assigned projects. Provide accurate drawings for HVAC control systems and schematics using Visio. Have the ability to size control valves, dampers, air flow stations, and the like for HVAC systems. Experience designing systems with typical DDC control lines such as: Schneider Electric, Tridium, or similar. Be able to write and understand the sequence of operations for HVAC control systems, along with assembling submittals and O&Ms for projects. Work Experience • Associate degree in Mechanical Engineering/Mechanical Engineering Technology/Electrical Engineering/Computer Engineering or other STEM field with 1-3 years' experience in relevant field., • 2+ years' experience in controls design engineering OR 5+ years as a controls technician., • Sound knowledge of electrical circuits, HVAC and controls required., • Advanced computer skills and proficiency in MS Office Suite required., • Must be able to deal with a large volume of work in a fast-paced, time-sensitive environment. What would we love to see? • Bachelor's degree in Mechanical Engineering/Mechanical Engineering Technology/Electrical Engineering/Computer Engineering or other STEM field with 1-3 years' experience in relevant field. Benefits Advance your career with Stark Tech, a leader in facilities and energy solutions. We specialize in integrating systems, providing energy-efficient equipment and services, and supporting sustainability through innovative technologies like renewable natural gas conversion and energy storage solutions. At Stark Tech, we prioritize employee well-being and offer comprehensive benefits including paid time off, 401(k) with employer match, medical coverage, wellness programs, and career development opportunities. Join our fast-growing, customer-focused organization where your skills and dedication will be valued and rewarded with competitive pay and a positive work environment.

Job DescriptionJoin a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. The Off-Shift Quality Assurance (QA) Supervisor is responsible for overseeing quality operations across second and third shifts, ensuring compliance with food safety, quality, and regulatory standards at Upstate Niagara Cooperative, Inc. This role works closely with the QA Manager and Assistant QA Manager to provide leadership, direction, and support to QA technicians and plant personnel, ensuring consistent quality practices during off-shift operations. The role will primarily be on 3rd shift along with weekends and holidays. Key Responsibilities • Work closely and communicate daily with the QA Manager and QA Assistant Manager to ensure alignment on priorities, issues, and corrective actions., • Supervise QA operations across second and third shifts, providing daily direction, guidance, and support to QA technicians as necessary., • Ensure all QA technician responsibilities and required documentation are completed accurately and on time by the end of each shift., • Assist with training and onboarding of new QA technicians, as well as ongoing training for current technicians and plant personnel., • Support scheduled preventive maintenance (PMs) and troubleshooting of laboratory equipment; coordinate repairs as needed., • Assist with laboratory and plant equipment calibrations., • Support Organic, Allergen, Gluten-Free, and Environmental monitoring programs, including weekly, monthly, and annual swabbing, and assist with internal and external plant audits as required., • Assist with training QA technicians on approved laboratory procedures, laboratory equipment, finished product formulas, finished product specifications, and formula batching requirements., • Oversee inventory and ordering of laboratory supplies., • Support the QA Assistant Manager with daily and weekly employee scheduling, including overtime planning and coverage., • Assist with routine plant inspections, including GMPs and Plan of Control verification, and follow up on corrective actions as needed. Qualifications Education • Associate’s or Bachelor’s degree in Food Science, Dairy Science, Biology, Chemistry, or a related field preferred, or equivalent experience. Experience • 3-5 years experience prior Quality Assurance experience in a food manufacturing environment required., • Dairy or other regulated food manufacturing experience preferred., • 1 – 2 years supervisory or lead experience strongly preferred. Skills • Working knowledge of GMPs, food safety programs, and quality systems., • Strong verbal and written communication skills., • Strong organizational and time management skills., • Proficiency with laboratory equipment and documentation systems. Competencies • Leadership and team development, • Attention to detail, • Problem-solving and decision-making, • Ability to work independently during off-shift operations, • Collaboration and cross-functional communication Working Conditions (Physical Demands) • Ability to work in a manufacturing environment, including exposure to cold temperatures, noise, and production areas., • Ability to stand, walk, and conduct inspections for extended periods., • Ability to lift up to 40 pounds as required., • Ability to work flexible hours across second and third shifts. Pay: $65K-$85K a year* • The salary range listed for this position represents the good faith and reasonable minimum and maximum pay for this role at the time of posting. Actual compensation may vary based on factors including, but not limited to, experience, skills, training, knowledge, education, and overall qualifications. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Position Summary: With team members and customers in 39 countries around the globe, HostPapa is currently one of the fastest-growing web hosting companies with a wide range of products available. At its core, we provide individuals and small and medium-sized businesses with access to valuable tools and services critical to their online success, including a Website Builder service for making website creation an ultra-easy task for anyone. Tailored to meet every user's unique needs, our award-winning customer support, email, and cloud-based solutions keep HostPapa at the cutting edge of the web hosting industry and innovation by putting our customers first. As a Data Center Technician, you will play a key role in supporting the daily operations of our data center. You’ll be hands-on with server hardware, perform system installations and configurations, and ensure that all infrastructure is running smoothly and efficiently. This is a great opportunity for someone who enjoys working in a fast-paced technical environment and takes pride in building and maintaining high-performance systems. This is a full-time, on-site role based in our data center in Buffalo, NY. What you’ll do: • Set up, configure, and deploy physical server hardware according to customer specifications, • Install and manage a variety of operating systems, including Windows Server, CentOS, Ubuntu, and Debian, • Complete technical service requests in person or via ticketing system with a focus on speed, accuracy, and documentation, • Maintain system inventory and configuration records for accountability and future reference, • Perform infrastructure tasks such as cable routing, component replacement, and diagnostic testing, • Keep the data center organized, clean, and operating within established safety and procedural guidelines, • Work collaboratively with internal teams to support ongoing hardware and system needs, • Support other tasks or projects as assigned to meet team and business needs About you: • At least 2 years of hands-on experience with computer hardware, including server builds and installations, • Confident installing and configuring various operating systems (Windows Server, Ubuntu, CentOS, Debian, etc.), • Familiar with data center workflows such as racking equipment and managing cabling, • Comfortable working with SuperMicro hardware and related components, • Strong troubleshooting skills—both onsite and remote, • Detail-oriented with solid organizational habits, • Excellent verbal and written communication skills What we offer: • A competitive salary that values you and your unique skill sets, • Career advancement & professional development opportunities to help you reach your full potential, • Flexible work arrangements to support work/life balance About us: At HostPapa, we’ve been committed to providing a complete array of enterprise-grade cloud services solutions to every business owner since 2006. These services, traditionally out of reach to smaller businesses, are offered in a one-stop shop, making it quick and easy for customers to select the services they need to grow. We back these offerings with 24/7 award‑winning customer support in four languages. Our HostPapa team values diversity and inclusion. We have a friendly company culture built on trust and respect. With the acquisition of several companies into our product portfolio, we’re growing at an incredible rate and have ample opportunities for career growth. Come join our talented team of enthusiastic, hard-working, passionate, driven people engaged in meaningful, innovative work. We can’t wait to meet you! HostPapa is an equal-opportunity employer committed to diversity and inclusion. As a multicultural organization, we encourage individual achievement and recognize the strength of our diverse team. HostPapa is committed to providing accommodations for people with disabilities. If you require accommodation, please let us know, and we will work with you to meet your needs. Accommodation may be provided in all parts of the hiring process. Powered by JazzHR 5P6SbEoKbM

Job Description We are seeking an experienced Journeyman HVAC R Technician to support commercial and industrial service operations in the Indiana market. This role is focused on maintaining and servicing complex mechanical systems across environments such as data centers, healthcare facilities, advanced manufacturing, and large commercial buildings. The Journeyman HVAC Technician will be responsible for diagnosing, repairing, and maintaining critical HVAC and mechanical systems to ensure reliability, efficiency, and uptime in high-performance environments. What We’re Looking For • Strong commitment to safety, quality, and compliance in regulated environments, • Excellent communication and teamwork skills, • High level of reliability and professionalism in client-facing situations, • Strong troubleshooting and problem-solving abilities, • Ability to work independently and manage multiple service calls Key Responsibilities • Diagnose, service, and repair commercial and industrial HVAC systems without supervision, • Perform preventative maintenance and system inspections on critical equipment, • Service equipment including:, • Large RTUs and package units (50+ tons), • Boilers, heat exchangers, and hydronic systems, • Chillers and chilled water systems, • Control valves, actuators, and mechanical components, • Troubleshoot electrical, mechanical, and building automation/control systems, • Support system uptime in mission-critical environments such as data centers and healthcare facilities, • Read and interpret blueprints, schematics, and technical documentation, • Ensure all work is completed in compliance with local codes, safety standards, and client requirements, • Communicate effectively with customers, project teams, and internal leadership, • Mentor junior technicians and support field development when needed Qualifications • 5+ years of commercial or industrial HVAC service experience, • EPA Certification required, • Strong experience with complex mechanical systems and controls, • Ability to independently diagnose issues and execute repairs in the field, • Valid driver’s license and clean driving record Preferred Qualifications • Experience working in mission-critical environments (data centers, semiconductor, healthcare), • Familiarity with building automation systems and controls, • Experience with chiller maintenance, retrofits, or large-scale mechanical systems, • Background supporting high-tech or regulated facilities

A pharmacy technician assists pharmacists in dispensing medications, managing inventory, and providing customer service to ensure accurate and efficient pharmacy operations. Looking to start a rewarding career path in the healthcare industry? Use Dreambound to find a Pharmacy Technician program that

Summary About the Position: Serves as the District Logistics Manager (DLM) and advisor to the District Commander / Center Directors and staff concerning all logistics support functions. Learn more about this agency Duties Help • Supervises a team in achieving and supporting tasks related to US Army Corps of Engineers supply, transportation, equipment, owned and/or leased facilities management programs and personal property program., • Develops, implements and tracks individual and team assignments, projects, milestones and program deadlines., • Communicates work requirements and time frames for completion, monitors progress and quality of work, prepares reports, and resolves work issues and problems., • Responsible for implementation of policies, strategies, and alternative measures in accordance with regulations for each logistical function., • Responsible for operations of the District's four major logistics programs of supply, transportation, maintenance, and facilities management., • Manages and has direct oversight for the District / Center of Supply operations which involve coordination and assistance concerning personal property inventories, accountability, authorizations and disposal., • Manages and has direct oversight for District / Center of Transportation operations which include vehicle fleet operational management., • Manages and has direct oversight of District / Center of Facility Management which includes system control, oversight, data entry, repair, history, analysis and documentation of the Facilities Equipment Maintenance System (FEM) control program., • Assembles and forwards budget requirements concerning current and future projected logistics operational support of the District. Requirements Help Conditions of employment • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation., • Must complete Civilian Education System (CES) Foundation Course and Supervisory Development Course within 12 months of employment., • May be required to work evenings, weekends, and holidays., • This position is designated as Misson Essential in accordance with DoDI 3020.42. The incumbent is required to report for duty during inclement weather, Natural Disasters, and other emergency situations as directed., • May be required to remain on duty after the official shift ends. Qualifications Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. • Current Civilian Employees of the Command, • Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel Workforce, • Interagency Career Transition Assistance Plan, • Land Management Workforce Flexibility Act, • Military Spouses, under Executive Order (E.O.) 13473, • Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible, • Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible, • Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement, • Priority Placement Program, DoD Retained Grade Preference Eligible, • Veterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Specialized Experience: One year of specialized experience which includes planning, evaluating, and implementing comprehensive logistics programs encompassing supply, transportation, equipment, and facilities maintenance. This experience must include developing budgetary recommendations for logistics operations, conducting internal quality assurance assessments to ensure regulatory compliance, and providing technical advisory services to management and field officials. Additionally, it involves leading projects or teams, tracking program milestones, and taking corrective actions to resolve logistical deficiencies. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience aloneno substitution of education for experience is permitted. Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11). Additional information • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration., • You will be required to provide proof of U.S. Citizenship., • This position requires a 1-year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest., • Direct deposit of pay is required., • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees., • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet., • This is a(n) CP13 Career Field position., • Multiple positions may be filled from this announcement., • Salary includes applicable locality pay or Local Market Supplement., • When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction/ for more information., • Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest., • Relocation and Recruitment Incentives may be authorized with a signed service agreement. Reasonable Accommodation (RA) Requests: If you believe you have a disability (i.e., physical or mental), covered by the Rehabilitation Act of 1973 as amended that would interfere with completing the USA Hire Competency Based Assessments, you will be granted the opportunity to request a RA in your online application. Requests for RA for the USA Hire Competency Based Assessments and appropriate supporting documentation for RA must be received prior to starting the USA Hire Competency Based Assessments. Decisions on requests for RA are made on a case-by-case basis. If you meet the minimum qualifications of the position, after notification of the adjudication of your request, you will receive an email invitation to complete the USA Hire Competency Based Assessments, based on your adjudication decision. You must complete all assessments within 48 hours of receiving the URL to access the USA Hire Competency Based Assessments if you received the link after the close of the announcement. To determine if you need a RA, please review the Procedures for Requesting a Reasonable Accommodation for Online Assessments here: https://appsupport.usastaffing.gov/hc/en-us/sections/28980686389652-Reasonable-Accommodation-Information Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job Title: Bomb Technician (EOD) Category / Component: Enlisted • Active Overview Explosive Ordnance Disposal Technicians locate, identify, render safe, and dispose of explosive threats on land, at sea, and underwater, using advanced robotics, diving, and explosives skills to protect forces and civilians and support fleet and joint operations worldwide. Key Responsibilities Detonate and demolish hazardous munitions, pyrotechnics, and outdated explosives; neutralize ordnance including sea mines, torpedoes, depth charges, and improvised explosive devices; remotely disable unsafe ordnance using robotic and diagnostic technology; conduct parachute and helicopter insertion operations; clear waterways of mines in support of ships and submarines; provide explosive ordnance support to law enforcement agencies and organizations such as the United States Secret Service and Department of State. What to Expect Global missions in every environment, from parachuting into remote terrain to arriving by small boat on foreign shores; majority of time spent in the field conducting high risk, time critical tasks with strict safety and risk management; regular integration with Special Operations, fleet units, and interagency partners; intense physical and mental demands with a culture that values precision, calm decision making, and discipline. Work Environment Operate worldwide on land, at sea, and underwater from EOD Mobile Units and detachments; insert via parachute, helicopter, and small boats; work from ships, shore commands, and forward locations; serve in small team based units that balance training, readiness, and operational tasking with limited administrative overhead compared to field work. Pathways, Training & Advancement Recruit Training followed by an EOD preparatory course at Great Lakes, Illinois, that builds swimming, conditioning, small boat skills, and risk management fundamentals; EOD Assessment and Selection Course that evaluates aquatic adaptability, running, swimming, academics, professionalism, and teamwork; Navy diver training at the Naval Diving and Salvage Training Center; Naval School Explosive Ordnance Disposal, which covers demolition, conventional ordnance, underwater mines, missiles, landmines, and chemical, biological, radiological, and nuclear threats; Basic Parachute Training and ongoing advanced training and qualifications throughout a career. Apply for the Navy Warrior Challenge contract for EOD during initial enlistment, then pass the EOD Physical Screening Test and diver medical screening; complete required assessments and receive recommendation and screening from an EOD officer or senior enlisted EOD technician; additional in service accession requirements may include minimum time on board, performance standards, and command endorsement. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Eyesight correctable within EOD diving standards, with no color blindness; qualifying ASVAB scores using combinations such as arithmetic reasoning and verbal expression or general science, mechanical comprehension, and electronics information; age typically 30 or younger at accession; United States citizenship and eligibility for a security clearance; excellent physical condition and swimming ability, with the capacity to perform detailed technical tasks under stress and in hazardous environments. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Job Description Evergreen Health At Evergreen and our affiliates, we value collaborative, down-to-earth individuals and encourage self-expression. We recognize that our diverse workforce allows us to provide culturally competent care to everyone in our community. We’re seeking a hands‑on, dependable Maintenance Technician to help keep our facilities safe, welcoming, and fully operational. In this role, you’ll support the inspection, repair, and maintenance of mechanical, electrical, and plumbing systems across our properties. You’ll also help maintain interior and exterior building spaces—ensuring they remain clean, functional, and in good condition for our staff and the community we serve. As part of the essential functions of this role, the Maintenance Technician: · Understand assigned properties and review building operations, maintenance schedules, and equipment status. · Update and manage work orders in the maintenance system; work with Facilities staff to resolve delays. · Support preventative maintenance programs and maintain logs/inspection reports for life‑safety equipment. · Perform routine, preventative, and predictive maintenance tasks as assigned. · Troubleshoot heating, cooling, and refrigeration issues; coordinate vendor repairs when needed. · Inspect buildings to ensure proper heating, lighting, ventilation, cleanliness, and overall condition. Qualified candidate will have a high school diploma, or equivalent, and one (1) year of applicable working experience in general building repair and maintenance, basic plumbing, electrical and HVAC, three (3) years preferred. Candidate must be able to safely crawl, climb and lift at least 50lbs and have knowledge and safe performance practices in the use of relevant equipment and tools. Strong customer service and interpersonal skills, strong organizational and decision-making skills and ability to multitask, prioritize and meet deadlines essential. Must be able to communicate clearly and professionally in writing and verbally. Familiarity with computers and MS Office software (Outlook, Word) preferred. Awareness of and sensitivity to the issues and health disparities faced by underserved populations is essential. Job type: Full-time Required education: High school diploma Required experience: General building repair and maintenance, basic plumbing, electrical and HVAC (1 year) This position is posted with a salary range. The actual rate of pay offered will be based on a variety of individualized factors, including but not limited to a candidate’s skills, relevant experience, educational background, internal equity, and market considerations. What Evergreen Health Offers You: • Multiple comprehensive medical health insurance plans for you to choose from, • Dental and Vision coverage at no cost to you, • Paid Time Off package that equals 4 weeks of time in your first year, • 403b with a generous company match, • Paid parking or monthly metro pass, • Professional development opportunities, • Paid lunch breaks Evergreen Health is an Equal Opportunity Employer; we do not discriminate on the basis of age, citizenship, color, disability, ethnic or national origin, gender expression, gender identity, language, race, religion, sex, sexual orientation, socioeconomic status, or any other characteristic protected by federal, state, or local law.

Job DescriptionSalary: $24.00 to $26.00 per hour About Us: TM Montante Development is a full-service real estate development and property management company that develops distinct properties with a passion for enduring design, character and authenticity. Our expert team recognizes the importance of innovation and is dedicated to demonstrating that smart planning leads to better outcomes for every project partner, while also having a positive impact on the built environment. We work to define each clients purpose and mission and then collaborate on innovative strategies to turn that vision into reality. We are seeking an experienced Maintenance Technician to join our team! About the Role: The successfulMaintenance Technicianwill be responsible for a variety of duties, including but not limited to: • Performing required maintenance and/or repairs to commercial and residential buildings (plumbing, carpentry, electrical, appliances, painting/drywall, HVAC, fire, and security systems)., • Ensuring timely and efficient completion of work orders, customer requests, emergency and preventative maintenance, • Troubleshooting problems and work with vendors when necessary, • Collaborating with Property Managers, Operations Manager, and other team members, • Inspecting buildings for adequate heating, lighting and ventilation, and are properly cleaned, • Performing safety checks on fire life safety equipment, smoke and Co2 detectors, and emergency lighting, • Performing Apartment turns which include dry wall repairs and painting, • Maintaining and enforcing building code guidelines for maintenance, mechanical and electrical areas., • Troubleshooting and repairing appliances, • Accurately documenting all work performed in the work order system, including labor hours, materials used, photos, and completion notes. Qualifications & Experience: • 3 years or more of experience working in a Maintenance Technician role covering multi-use buildings with commercial and residential spaces, • Knowledgeable on safe performance practices regarding the use of tools and equipment required to complete assigned tasks., • Familiarity with technology and software for work order management via computer and cell phone, • Professional communication skills and the ability to communicate with all stakeholders, • Ability to work independently, • Ability to travel to multiple work locations throughout WNY during the workday and transport necessary equipment and tools, • Ability to obtain a Government Security Clearance, • Able to work a rotating on-call schedule stipend provided Compensation Package: Montante Group offers a competitive total compensation package including: • Competitive base wages, reviewed annually with bonus potential, • Mileage and annual work attire allowance., • A comprehensive benefit package including medical insurance with employer contribution towards premium, medical opt out credit, employer paid life and long-term disability insurance!, • Voluntary Dental and Vision insurance, • Up to 15 days of paid time off (PTO) in year one, increasing with years of service, and paid holidays, • Financial insurance protection options which include short- and long-term disability, accidental death & dismemberment insurance, critical illness and accident insurance, legal and identity theft options, and pet insurance, • 401k Retirement Plan with employer match, • Training & Professional Development opportunities, • Community and Employee engagement events and initiatives

Job Description API Heat Transfer is looking for people who enjoy being part of transformation. We have a new mission, new leaders, and are accelerating our path to Lean Cultural Change. Our Operations Team is on the way to becoming a Lean Management powerhouse! If you like to fix things, and want to be part of a new API, we'd love to talk to you about our Machine Repair Technician - 1st Shift position! At API we take our culture transformation seriously! To help find the best fit for our positions and organization, we ask that you complete our 10-minute Culture Index Survey. Simply follow the link after submitting your application to help us use our interview time to dive deeper into your job behaviors and work history. https://go.cultureindex.com/s/7Y0awCvsZZ What We Offer You: • Starting wage $29.18/hour, incremental increases move to $31.48 after one year, • Be part of leading-edge technology for the heat transfer industry, • Career development and advancement, • Multi-site, global operations to learn!, • Ability to impact customers across multiple industries, • Full health & welfare benefits, 401(k), PTO What Can Our Location Offer You: • Only 20 minutes from the beautiful Buffalo waterfront and 45 minutes from Niagara Falls, • In house market style cafeteria with plenty of healthy selections, • Buffalo is known for our wide range of choices for food and beverages from our famous Buffalo Wings and Beef on Weck to several micro-breweries and distilleries scattered across the region Duties: • Requires the ability to install, service, dismantle, rebuild and maintain in operating condition various machines and equipment throughout the plant., • Also must be able to diagnose trouble, determine methods of repair, make installations, plan layout, move and complete work on machines or equipment with minimum of supervision., • Must have knowledge of construction and machine design prints, shop mathematics and a minimum of 5 years experience in this type of work. Have necessary standard tools., • Work close tolerances as required and make simple parts if needed. Will do general maintenance functions as required at the direction of the supervisor. Qualifications: • High School degree or equivalent (required), • 2-5 years Machine Repair experience (required), • Ability to lift up to 50 lbs., • Constant standing/walking, bending, kneeling, stooping, crouching, crawling and reaching, • Ascending/descending ladder, scaffolding, or stairs, • Grasping, manipulating, or assembling objects with hands/fingers, • Clear vision (near/far/peripheral) and hearing for safety, • Must have necessary standard tools Check out the COOL things we’ve been up to! • Cube Cooling for Frac Truck, • Turnkey Solutions for Nonalcoholic Beer & Wine, • Heat Exchanger for Pharmaceuticals INDZ

Job Description We are currently seeking qualified candidates for a SUE Technician opening in our Rochester, Buffalo, Syracuse, or Ithaca, NY office. LaBella fosters a team-oriented atmosphere and emphasizes unparalleled client services. As a SUE Project Manager for LaBella, you will assist with all SUE activities for land surveying and multi-disciplinary projects. You will be integral to the safe and accurate identification, mapping, and surveying of utility systems. You’ll have the chance to lead daily field operations, working alongside a skilled team of technicians, engineers, and surveyors. Duties: • Operate and maintain SUE utility locating and designating equipment (electromagnetic induction and Ground Penetrating Radar (GPR) to accurately identify and map subsurface utilities., • Ability to read and interpret utility prints, design plans, and map utility infrastructure., • Strong communication skills, attention to detail, and experience managing field crews., • Assist with the day-to-day operations of the field and office Team on a variety of SUE projects., • Participate in weekly scheduling and coordination meetings with the project team., • Prepare detailed, accurate daily reports, field sketches, and forms both electronically and by hand., • Assist with the QA/QC of final SUE deliverables., • Represents the land survey group on multi-discipline project teams., • Collaborate with other disciplines to identify opportunities for SUE services., • Ensures maintenance of existing technology., • Manages archiving of records., • Valid driver’s license with a clean driving record., • Ability to lift 50 lbs. and perform physical tasks., • Other duties as assigned. Requirements • AAS or BS degree in a technology discipline such as land surveying, engineering, geology, forestry, or landscape architecture., • Minimum of 2 years’ experience in equal or related position of responsibility demonstrating past management experience, utility design and coordination., • Previous SUE experience in an engineering design environment., • Knowledge of utility designation, records research, and field operations documentation., • Demonstrates excellent verbal and written communication skills., • Knowledge of land surveying systems, procedures & technology., • Familiarity with AutoCAD Civil 3D, Trimble Business Center, Carlson and Inroads software is a plus., • Self-motivated, self-starter with the ability to work in a team environment and independently., • Maintain a current driver’s license in good standing and able to operate company owned vehicles., • Willingness to work overtime as needed., • Experience with DOT, municipal, or public utility projects., • OSHA Safety certifications are a plus. Salary Range: $24.00 - $30.00 an hour The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description API Heat Transfer is looking for people who enjoy being part of transformation. We have a new mission, new leaders, and are accelerating our path to Lean Cultural Change. Our Operations Team is on the way to becoming a Lean Management powerhouse! If you like to fix things, and want to be part of a new API, we'd love to talk to you about our Machine Repair Technician - 2nd Shift position! What We Offer You: • Starting wage $29.18/hour, incremental increases move to $31.48 after one year, • 2nd Shift differential of $1.50/hour, • Be part of leading-edge technology for the heat transfer industry, • Career development and advancement, • Multi-site, global operations to learn!, • Ability to impact customers across multiple industries, • Full health & welfare benefits, 401(k), PTO What Can Our Location Offer You: • Only 20 minutes from the beautiful Buffalo waterfront and 45 minutes from Niagara Falls, • In house market style cafeteria with plenty of healthy selections, • Buffalo is known for our wide range of choices for food and beverages from our famous Buffalo Wings and Beef on Weck to several micro-breweries and distilleries scattered across the region Duties: • Requires the ability to install, service, dismantle, rebuild and maintain in operating condition various machines and equipment throughout the plant., • Also must be able to diagnose trouble, determine methods of repair, make installations, plan layout, move and complete work on machines or equipment with minimum of supervision., • Must have knowledge of construction and machine design prints, shop mathematics and a minimum of 5 years experience in this type of work. Have necessary standard tools., • Work close tolerances as required and make simple parts if needed. Will do general maintenance functions as required at the direction of the supervisor. Qualifications: • High School degree or equivalent (required), • 2-5 years Machine Repair experience (required), • Ability to lift up to 50 lbs., • Constant standing/walking, bending, kneeling, stooping, crouching, crawling and reaching, • Ascending/descending ladder, scaffolding, or stairs, • Grasping, manipulating, or assembling objects with hands/fingers, • Clear vision (near/far/peripheral) and hearing for safety, • Must have necessary standard tools Check out the COOL things we’ve been up to! • Cube Cooling for Frac Truck, • Turnkey Solutions for Nonalcoholic Beer & Wine, • Heat Exchanger for Pharmaceuticals INDZ

Job Description BMW Management is seeking a skilled and dependable Maintenance Technician for Windsong Place Apartments, a well-established luxury community in Williamsville. Set within a beautifully maintained, park-like environment, Windsong Place has been locally owned and professionally managed for over 30 years, earning a reputation for quality, consistency, and pride in ownership. Our excellence is recognized not only within the industry, but also by our residents and their extended communities, and is reflected in a team culture where employees at every level take pride in their work. This hands-on role includes responding to service requests, performing repairs, maintaining building systems, and preparing apartments for new residents. Your work directly impacts the condition of the property and the daily experience of residents. With a lower-than-average turnover rate and a true neighborhood feel, Windsong Place offers the opportunity to build meaningful connections while contributing to a community that residents—and staff—are proud to call home. An ideal candidate will possess: • Experience in maintenance in a residential setting with a solid understanding of maintenance best practices., • Strong leadership skills, with the ability to develop and mentor others effectively when applicable., • Excellent problem-solving abilities, with a proactive approach to identifying and resolving maintenance issues., • In-depth knowledge of general maintenance practices, including HVAC systems, plumbing, electrical work, etc., • Must possess skills and expertise in painting as well as all other areas related to completing timely and thorough apartment turnovers., • Professional verbal and written communication skills enabling effective articulation with residents, team members and senior management., • A commitment to delivering outstanding customer service, with a focus on exceeding expectations. Your responsibilities will include: • Completion of day-to-day maintenance operations, ensuring the highest standards of quality and safety are maintained., • Preparing apartments for new residents including painting and maintenance repairs, • Promptly addressing resident maintenance requests and providing exceptional customer service to ensure resident satisfaction., • Participating in snow removal and alternating on-call with other team members. Comprehensive Benefits Package (Valued at over $18,000 annually): • 401(k) with up to 5% company match, • Medical Insurance - 100% employer paid premium option available, • Dental Insurance, • Vision Insurance, • Life & Disability Insurance, • HSA/FSA options (tax savings opportunities), • 40 hours of Paid Time Off, 10 Holidays (including your Birthday!), and up to 3 weeks’ Vacation Time, • Performance bonuses (on-call, snow removal, turnovers) Schedule: Full-time | Monday–Friday 8:00-4:30 | On-call rotation and occasional weekends Join a locally rooted 50 year organization where your leadership, expertise, and attention to detail will directly shape the future of a well-established luxury community. Experience: • Residential/Property Maintenance: 3 years (Required) License/Certification: • Driver's License (Required)

Embrace the opportunity to become a Pharmacy Technician at CVS Health and play a vital role in supporting pharmacy operations, ensuring accurate prescription fulfillment, and delivering exceptional patient care.

Job Description Job Title: Field Service Technician – Great Lakes Machinery Job Summary: We are seeking a highly motivated Field Service Technician to join our team, specializing in the maintenance, repair, and installation of industrial machinery in the Western NY region. The ideal candidate will have a strong mechanical and electrical background, excellent troubleshooting skills, and a commitment to providing exceptional customer service. This position requires travel to customer locations within the region to ensure optimal machine performance and customer satisfaction. Key Responsibilities: • Perform on-site installation, maintenance, troubleshooting, and repair of industrial machinery and equipment., • Conduct routine inspections and preventative maintenance to ensure machinery operates efficiently and safely., • Diagnose and resolve mechanical, electrical, hydraulic, and pneumatic issues with precision and efficiency., • Provide technical support and training to customers on proper equipment usage and maintenance practices., • Maintain detailed service records, including work performed, parts used, and equipment condition., • Collaborate with customers and internal teams to identify and resolve issues effectively., • Ensure compliance with safety protocols and company standards during all service activities., • Manage parts inventory and tools necessary for field service operations., • Travel regularly within the Western NY region to support customer needs, with occasional overnight stays as required. Qualifications: • High school diploma or GED; technical or vocational training in industrial maintenance, mechanics, or a related field preferred., • Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems., • Proficiency in reading and interpreting technical manuals, schematics, and diagrams., • Excellent problem-solving skills and the ability to work independently under minimal supervision., • Strong communication and customer service skills., • Proficient with basic computer software, including Microsoft Office and service management systems., • Valid driver’s license and ability to travel extensively within the Great Lakes region., • Ability to lift heavy equipment and work in varying environments (e.g., factories, warehouses, outdoor settings). Preferred Qualifications: • Experience working with CNC Machines. Benefits: • Competitive salary with learning opportunities and room for growth, • Comprehensive benefits package, including health insurance and dental paid 100% in full, • Paid Time Off (PTO), • 401K with employer match., • Company-provided travel expenses with IRS Mileage Rate, • Monthly phone allowance, • Opportunities for professional development and training About Us: Founded in 1989, Great Lakes Machinery is a Veteran Owned and Operated business that supplies services and supports world-class CNC Machine Tools to manufacturers in New York State. How to Apply: Interested candidates should submit their resume and cover letter to Sean@glmincny.com or Partsandservice@glmincny.com with the subject line “Field Service Technician – Great Lakes Machinery.” We are an equal opportunity employer and encourage individuals of all backgrounds to apply.

Job Description Join a Top-Rated Team (4.9★ with 1,000+ Reviews) Chem-Dry of Buffalo is looking for a reliable, motivated Service Technician to join our growing team. If you enjoy hands-on work, helping customers, and being part of a high- performing crew, this is a great opportunity. No two days are the same. You’ll be out in the field providing professional cleaning and restoration services that make a real difference for our customers. What You’ll Be Doing Cleaning & Restoration • Carpet, upholstery, and tile cleaning, • Odor removal and deodorization, • Deliver high-quality results on every job Customer Service • Provide a friendly, professional experience, • Answer questions and communicate clearly, • Represent the company with a positive attitude Daily Operations • Complete work orders, invoices, and job notes, • Collect payments Equipment & Vehicles • Keep trucks clean, stocked, and organized, • Perform basic maintenance on equipment What We’re Looking For • Strong work ethic and reliability, • Great customer service and communication skills, • Attention to detail, • Ability to work independently and as part of a team, • Basic math and problem-solving skills, • Familiarity with Buffalo/Rochester area is a plus Requirements • Valid driver’s license with a clean driving record, • Ability to lift up to 50 lbs and perform physical work, • Comfortable using cleaning equipment and chemicals, • Must use personal cell phone for job communication/navigation Performance Expectations • Deliver high-quality service with a focus on customer satisfaction, • Maintain strong attention to detail and efficiency, • Follow all company policies and safety standards Work Environment • Company-provided uniform, • Hands-on, active work environment, • Supportive team and ongoing training Why Work With Us • Family owned and operated, • Established, growing company, • Strong reputation in the community, • Opportunity for long-term growth, • No experience needed, paid training Compensation & Benefits • Pre-Scheduled Jobs Provided – no need to generate your own leads, • Commission-Based Pay on pre-scheduled work, • Daily Bonus Incentives for performance and production, • High Earning Potential – opportunity to earn well above hourly positions, • Customer Tips for additional income, • Paid Training to set you up for success, • 401(k) Plan, • Paid Time Off (PTO), • Access to Health Care Plans, • Flexible, Accommodating Schedule Apply Today If you’re dependable, motivated,

Job DescriptionSalary: WHO WE ARE: At Firematic, weve spent over 50 years serving those who protect us all. As a family-owned business, we take pride in delivering not just equipmentbut reliability, trust, and unmatched support to fire departments across our region. Our customers depend on us when it matters mostand were looking for someone who shares that responsibility. THE ROLE: This is not your typical sales joband its not just a technician role either.As a Rescue Solutions Specialist, youll be the go-to expert for Fire Equipment and Hurst rescue tools in your territory. Youll work directly with fire departmentsmaintaining their equipment, training their teams, and helping them make informed purchasing decisions. Youll build relationships in the firehouse, on the training ground, and in the fieldearning trust through both technical expertise and real-world credibility. WHAT YOU'LL BE DOING: Service & Technical Support Perform annual service, testing, and repairs on hydraulic and battery-powered rescue tools Troubleshoot equipment issues on-site and provide timely solutions Ensure all tools meet safety and performance standards Maintain detailed service documentation and reports Training & Customer Partnership Conduct hands-on tool demonstrations and training drills Support departments with product knowledge, application, and best practices Act as a trusted resource to chiefs, officers, and purchasing decision-makers Sales & Territory Development Grow Hurst product sales within your assigned territory Identify opportunities through existing relationships and new outreach Manage the full sales cycle: demo evaluation quote close Partner with Firematics apparatus and equipment teams on bundled opportunities Represent Firematic at trade shows, department events, and industry functions WHAT WE'RE LOOKING FOR: Mechanical or technical background (equipment service, automotive, diesel, or similar) Strong interpersonal skills and ability to build trust with first responders Self-starter who thrives in a field-based, relationship-driven role Ability to communicate technical concepts in a clear, practical way Valid drivers license and willingness to travel locally PREFERRED EXPERIENCE: Firefighter, EMT, or experience working with fire departments Background in rescue tools, hydraulics, or emergency equipment Prior sales or customer-facing experience WHY FIREMATIC? Established, respected name in the fire service industry Strong existing customer relationships across Long Island and beyond Team-oriented, family-run culture with long-tenured employees Opportunity to make a direct impact on life-saving operations COMPENSATION & BENEFITS: Competitive base salary + commission/bonus opportunities Company vehicle or allowance Full benefits package Ongoing training and manufacturer support THE IMPACT: At Firematic, this role is bigger than sales or service. Youre helping ensure that when a crew arrives on scene, their tools perform without hesitation. Thats the standard. Thats the mission.

Job DescriptionOverview Company Overview: Allied Universal®, North America's leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. Job Description Allied Universal® is hiring a Shift Supervisor in Amherst NY Starting pay is $21.58 an hour Sunday - Thursday 3:00 pm -11:00 pm Must have Valid NYS guard license and 6+ months of security experience The Shift Supervisor will be responsible for the security of a high profile client's facility, property, and surrounding campus for a designated shift. The Shift Supervisor performs general security duties as directed in the protection of persons and property and the enforcement of all applicable policies, rules, and regulations, as specified in post orders, and will deter criminal activity and misconduct. RESPONSIBILITIES: • Make emergency notifications as necessary pursuant to site Post Orders, • Provide direction and instruction to subordinates regarding the performance of their duties, • Cross-training officers to make them more versatile and run site efficiently, • Make productivity and cost reduction recommendations to management, • Make recommendations for physical security surveys and post orders, • Make recommendations for positive and negative personnel actions for those under their direct supervision, • Oversee staffing, scheduling and on-site training for security officer assigned to his/her shift., • Ensure that contract required training and screening elements for security personnel have been met, • Maintain overtime to minimum or to a predefined level designated by Allied Universal®, • Ensure quality of service and contract compliance by regularly inspecting security personnel and their job performance when assigned to his/her shift, • Perform other operations and related functions (e.g., payroll, review and maintain incident reports, assist in preparation of security surveys and post orders) QUALIFICATIONS: • High school diploma or equivalent, • Licensing requirements are subject to state and/or local laws and regulations and may be required prior to employment, • Current and valid driver's license, • Must possess one or more of the following:, • Associate's degree of higher in any discipline, • Service in the active-duty military, military reserves, or National Guard, • Service in auxiliary police or police cadets, • Minimum of one (1) year verifiable and successful security experiences, • Minimum of two (2) years of verifiable work experience demonstrating the following:, • Excellent customer service skills, • Ability to maintain poise and self-control during emergency situations, • Capability of understanding and applying written and verbal orders, and of composing reports, • Effective oral and written communication skills; write informatively, clearly, and accurately, • Planning and organizing skills, • Proficiency with Microsoft Office Applications, • Problem solving skills, • Coaching, mentoring, motivating skills, • Active listening skills, • Encourage effective teamwork, • Assess and evaluate situations effectively, • Synthesize facts, concepts, principles, • Identify critical issues quickly and accurately, • Compile, sort, and interpret data, • Research, investigate, compile information, • Mediate conflict with tact, diplomacy, • Setting and achieving goals, • Attending to detail PREFERRED QUALIFICATIONS: • Experience in Emergency Management Systems FEMA Incident Command Certification; ICO 100, 200, 300, • Working knowledge of EMS protocols, Medical First Responder or Emergency Medical Technician BENEFITS: • Medical, dental, vision, basic life, AD&D, and disability insurance, • Enrollment in our company's 401(k)plan, subject to eligibility requirements, • Seven holidays annually paid at time and a half, if worked, • 40 hours of vacation after one year of employment at eligible work assignments. Unused vacation is only paid out where required by law.Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: www.aus.com If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: www.aus.com/offices. Requisition ID 2026-1593343

Job Description Job Type: Full-time Job Location: Buffalo, NY Pay: $25.00 - $35.00 per hour based on experience Supplemental Pay: • Overtime pay, • Performance bonus Schedule: • Extended hours, • Monday to Friday, • On call ACT Power Services was created to provide industry leading services for our clients. As an independent service provider, we avoid conflicts of interest and maintain a complete focus on our clients' needs. We have taken a no-frills approach to developing our organization to ensure our clients are only paying for services that add value. ACT then leverages a world-class team, state of the art technology, and best-in-class operating practices to ensure every facility is operated in a manner that maximizes production, preserves compliance, and ensures the safety of our personnel and communities. Our vision is to reshape the industry's benchmark for renewable operations and create the next generation of O&M provider. The Field Service Technician is and entry-level position responsible for the safe, productive repairs and maintenance of Commercial and Utility Scale Solar PV plants. From performing preventative maintenance and inspections, to troubleshooting and making repairs to maximize production, the Solar Maintenance Technician gets to exercise a verity of skill sets and has constant opportunities to learn more. All while making an impact on our safe, reliable, clean energy future. This role will encompass performing the preventative and corrective maintenance on the solar modules, strings, trackers, and inverters. Responsibilities • Uphold a high level of safety standards in everything that you do, • Conducting routine preventive maintenance, service, troubleshooting and repair of solar photovoltaic facilities, • Willingness to learn the NEC code, electrical theory, and industry best practices, • DC and AC testing included but not limited to polarity, open circuit voltage, grounding continuity, communication, insulation resistance testing, I-V curve tracing, • Interpret schematics to understand system layouts and connections, • Maintain a schedule for routine maintenance, service, trouble shooting and repair of equipment at solar photovoltaic facilities including but not limited to: Single Axis trackers, Central or String Inverters, Transformers, AC and DC disconnects, Substation equipment, • Maintaining company property such as vehicle, tools, meters and plant stock, • Maintaining service reports, inspection documentation, safety paperwork, and spare parts inventory, • Provide maintenance and troubleshooting training to technicians and others as needed, • Identify safety hazards and take appropriate action to remove or eliminate hazards Qualification Requirements • Familiarity with electrical systems and components, • Proficiency in using power tools for repair tasks, • Ability to read and interpret schematics accurately, • Proficiency with MS Office suite, • Ability to take direction and complete tasks with minimal oversight, • Valid Driver's License, • Working knowledge and experience operating under OSHA 1910, NFPA 70E, and 70B, • OSHA 10 General Industry certificate, • Must have the ability to travel, work on-call during off-shift hours and weekends Physical Requirements/Work Environment: • Work is to be performed outdoors at various job sites., • Must be able to comply with all safety standards and procedures. PPE personal protective equipment is required., • Must have the ability to sit, stoop, kneel, bend, stand, or walk for 8-10 hours a day., • Must be able to lift, push, or pull up to 50 pounds on an occasional basis Benefits: • 401(k) with employer match, • Health Insurance, • Dental Insurance, • Vision Insurance, • Flexible Spending Account, • Health Savings Account, • Short-term and Long-term disability, • Critical illness, • Paid Time Off, • Parental Leave, • Paid Holidays, • Employee assistance program, • Life insurance, • Opportunities for advancement, • Training and Development, • Legal and Identity Theft, • Company vehicle opportunities, • Pet Insurance Act Power Services does not accept any unsolicited resumes or referrals from any third-party recruiting firms or agencies.

Job Description Warehouse Automation Technician Full-Time | On-Site | Work with Cutting-Edge Robotics Step Into the Future of Warehousing; This isn’t your typical warehouse role. As a Warehouse Automation Technician, you’ll be at the center of a fast-moving, tech-driven operation—monitoring and interacting with a fleet of robotic systems that keep our facility running at peak performance. If you enjoy problem-solving, hands-on work, and working with innovative technology, this is your opportunity to be part of something bigger. What You’ll Do In this role, you’ll take ownership of the automation systems that drive our operation: Monitor and manage warehouse automation technologies in real time Troubleshoot robotic systems and resolve operational interruptions Use tablets or mobile devices to interact directly with robotic equipment Escalate complex issues and track system performance Investigate root causes of system failures and contribute to continuous improvement Support overall warehouse flow by ensuring systems are operating efficiently Utilize internal applications to monitor system health and performance What We’re Looking For We’re looking for individuals who are both hands-on and solution-oriented: Strong problem-solving skills and ability to think on your feet Comfortable working in a fast-paced, active warehouse environment Ability to interact with web-based systems and applications Mechanical aptitude or technical curiosity is a big plus Experience with Microsoft SQL or data systems (preferred but not required) Familiarity with tools, safety equipment, or working at heights is helpful Physical & Work Environment This is a hands-on role that requires both awareness and mobility: Must be able to lift up to 40 lbs Comfortable working at heights up to 60 feet when necessary Ability to step over, under, and navigate steel rail systems Why This Role Stands Out Work directly with automation and robotics technology Be part of a forward-thinking, innovative operation Gain valuable experience in a rapidly growing industry Every shift brings new challenges and problem-solving opportunities Play a key role in keeping operations running smoothly Who This Role Is Perfect For Warehouse professionals looking to move into automation/tech-focused roles Mechanically inclined individuals who enjoy fixing and troubleshooting Candidates who like hands-on work with a technical edge Problem solvers who thrive in fast-paced environments Ready to Take Control of the System? If you’re looking for more than just a job—and want to work with technology that’s shaping the future of logistics—apply now to become a Warehouse Automation Technician. Monday-Friday 6:30am-2:30pm Monday-Friday 10:30pm-6:30am

Job Description Why Palmer Food Services? We offer competitive wages and a generous benefit package that contributes a significant amount to your total compensation and your personal well-being. Additionally, there are opportunities to distinguish yourself and move up in our established company through excellent performance and by contributing to our company mission, vision, and values. We value each member of our diverse and talented team - because at Palmer Food Services, our associates are our unfair advantage. What We Value: • Honesty & Integrity, • Service & Excellence, • Collaboration & Teamwork, • Family & Community, • Dependability & Loyalty, • Compassion Roles and Responsibilities: • Live the company’s values by displaying our high standard characteristics and behaviors that lead to our collective success as outlined in our Values in Action., • Install, maintain, and repair commercial dish machines, coffee brewers, espresso machines, and beverage dispensing systems at customer locations., • Demonstrate proper and safe equipment use for restaurant staff to ensure all machines operate efficiently and meet sanitation standards., • Diagnose and resolve equipment issues to minimize downtime for restaurant operations., • Enhance customer satisfaction by identifying potential problems and recommending effective service solutions., • Manage your daily route efficiently by recognizing service opportunities and implementing solutions in a timely manner., • Provide outstanding customer service through education, clear communication, and professionalism., • Respond to emergency service requests, including on-call coverage during weeknights, weekends, and holidays., • Cultivate strong relationships with restaurant managers and staff through reliability and excellent interpersonal skills., • Maintain accurate service records and communicate effectively with internal teams regarding parts, repairs, and customer needs., • Lift, transport, and install commercial equipment (dish machines, coffee brewers, etc.) safely and efficiently. Qualifications: • High School diploma or GED, • Experience installing and servicing commercial restaurant equipment, preferred, • Hands-on technical ability; mechanical/electrical/plumbing knowledge to troubleshoot and repair equipment and dispensing systems will be considered, • Valid New York State Drivers License, • Must be able to lift and/or carry 75 pounds, • Problem-solving ability to devise customer solutions, • Excellent organizational and time management skills, • Self-motivated and driven for results, • Basic Microsoft Word, Outlook, Teams, preferred Salary Range: • $19.00- $22.00/ hour based on experience Physical Demands: The physical demands described below are representative of those that must be met by an Appliance Install/ Repair Technician to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must be able to stand, walk, stoop, bend, kneel, sit, operate warehouse, • Must be able to use hands to handle and feel objects, perform fine finger movements, reach with hands and arms, and have the ability to see, talk, and hear., • Must be able to regularly lift and carry up to 75 lbs on a regular basis, • Possess normal vision with or without correction and able to distinguish colors, • Possess fluent speech in English, writing and communication skills necessary to effectively carry out job functions Benefits of working Full-Time at Palmer Food Services: • Medical, Dental and Vision Insurance, • Paid Benefit Time (PTO, Holiday and Sick), • 401k Retirement Plan with Employer Matching, • Eligibility for Annual Profit-Sharing Bonus, • 15% Employee Discount on Retail Grocery Items (Includes Fresh Meat & Seafood), • Associate Discounts on Warehouse Food Products, • Employee Appreciation Events, • And much more #HP

Job DescriptionJob Title: Construction Materials Technician Overview: The successful candidate will be responsible for learning test methods, specifications and reporting of findings related to various materials used in the day to day operations of the company. As well as assisting with other duties around the plant. Safety Expectations: All Suit-Kote employees are required to comply with all safety rules and to observe safe work practices and operating procedures at all times. Whenever on Suit-Kote property or job sites, or operating Suit- Kote equipment, employees are expected to conduct themselves in a manner that promotes the safety of the employee, co-workers and others. Responsibilities/Job Duties: • Grab samples from Raw and Finished product tanks, • Perform required testing on materials and record the results, • Enter Production on Enterprise and or on Excel, • Mix various stone with product, • Helping in the plant with production, • Helping load/unload tankers, • Painting, sweeping, moping, shoveling, scraping ect..., • Clear and concise reporting of all findings to immediate supervisor, • Maintain a clean and safe work environment Required Skills/Abilities: • Strong work ethic, • Strong attention to detail, • Good time management skills, • Attendance is "highly critical", • FLEXIBILTY- Overtime and weekend hours are anticipated and with minimal notice, • Travel throughout NY and PA sometimes required., • Passing a pre-employment drug and alcohol screening is required and a background check will be conducted, • Consent to a DMV license evaluation, • Must have or be willing to obtain an OSHA 10 Hour Safety Certificate Physical Requirements: • Must be able to lift 50 pounds, • Observe and comply with necessary PPE requirements, • Must be able to work in a noisy area with many odors present, • Bending, stretching, stooping, kneeling, crawling and squatting Other Preferred Qualities: • Associates degree in Engineering Science or Construction Technology, • Ability to read and understand SDS, • Basic computer skills (Microsoft Office) Salary: $20-$24/hour Position is considered full time, but seasonal in nature, with anticipated lay-off in the November thru March time-frame. Site specific locations may have varying seasonal requirements that can extend or contract these timeframes. Additional Duties: This job description in no way states or implies that these are the only duties to be performed. You will be expected to follow any other job-related instructions and to perform other job-related duties as requested by your supervisor. Benefits: Suit-Kote offers competitive wages, paid time off, and a growth oriented work environment. We extend employer-paid medical and dental benefits, as well as company-paid life insurance to all full-time employees. Personnel are eligible for participation in our 401k plan as well. Equal Opportunity Employer/Veterans/Disabled Equal Opportunity Employer/Veterans/Disabled Job Posted by ApplicantPro

Job Description Position Summary The Hyperbaric Technician plays a critical role in delivering safe, effective, and compliant hyperbaric oxygen therapy as part of RegenQuest’s wound care programs. This position ensures high-quality patient care, proper chamber operation, and strict adherence to regulatory and clinical standards while supporting RegenQuest’s mission of helping practices grow and improve patient outcomes across the nation. Key Responsibilities Clinical Operations • Operate monoplace and multiplace hyperbaric chambers in accordance with physician orders, safety protocols, and RegenQuest standard operating procedures (SOPs)., • Prepare patients for HBOT treatments, including screening, positioning, education, and documentation of vitals., • Monitor and document patient status and responses throughout hyperbaric sessions for clinical accuracy and safety., • Identify, respond to, and escalate clinical concerns or emergencies in collaboration with the supervising clinician or medical director., • Safety & Compliance, • Maintain strict compliance with NFPA 99, OSHA, UHMS (Undersea and Hyperbaric Medical Society) guidelines, and practice-specific policies., • Conduct pre- and post-treatment chamber safety checks — including pressure integrity, oxygen sensors, fire safety, and emergency systems., • Ensure infection control practices and sterile field integrity in treatment areas., • Participate in internal audits, quality improvement activities, and safety drills. Equipment & Maintenance • Perform routine equipment inspections, calibration checks, and preventive maintenance per manufacturer recommendations., • Coordinate with biomedical services or vendors for advanced repairs or re-qualifications., • Maintain inventory of supplies, emergency equipment, and documentation logs. Documentation & Records • Maintain accurate and timely documentation in Electronic Medical Records (EMR) systems, including treatment logs, vitals, patient charts, and regulatory checklists., • Assist in coding and billing support by accurately capturing treatment data required for claims and reimbursement processes. Patient & Practice Support • Educate patients and caregivers on HBOT expectations, safety restrictions, and post-treatment guidelines., • Support RegenQuest partner clinics by contributing to patient satisfaction and retention through professional, compassionate care., • Collaborate with practice teams to assist onboarding and support new wound care/HBOT program implementations. Qualifications Education • Required: High School Diploma or GED. Experience • Prior experience in a clinical setting — wound care, hospital, outpatient therapy, or similar environment., • Experience with hyperbaric chamber operations and clinical monitoring is highly desirable. Certifications/Requirements Current license or certification as applicable in state of practice in one of the following areas: • Certified Hyperbaric Technologist (CHT), • Certified Hyperbaric Specialist (CHS), • Certified Hyperbaric Wound Specialist (CHWS), • Certified Respiratory Therapy Technician (CRT), • Emergency Medical Technician (EMT) or Paramedic, • Licensed Vocational Nurse (LVN), • Military Corpsman or Medical Services Specialist Skills & Competencies • Strong understanding of hyperbaric oxygen therapy principles and patient safety standards., • Excellent observational, communication, and critical thinking skills., • Detail-oriented with the ability to manage multiple tasks in a fast-paced clinical environment., • Professional demeanor and ability to interact with patients, clinicians, and operational teams. Work Environment • Clinical treatment rooms equipped with hyperbaric chambers., • Exposure to a healthcare setting with medical devices and oxygen-rich environments., • May require standing for extended periods and assisting patients with mobility.Company DescriptionRegenQuest is a specialized managed services organization dedicated to helping physician practices integrate advanced wound care and HBOT seamlessly into their services. We support clinical operations, staffing, compliance, billing, and community outreach so medical practices can expand access to life-changing therapies for chronic, non-healing wounds and complex wound populations.RegenQuest is a specialized managed services organization dedicated to helping physician practices integrate advanced wound care and HBOT seamlessly into their services. We support clinical operations, staffing, compliance, billing, and community outreach so medical practices can expand access to life-changing therapies for chronic, non-healing wounds and complex wound populations.

Job DescriptionSalary: $50,000.00 to $60,000 annually Job Description:Managed ServicesLevel 2 Technician Reports to: Service Delivery Manager Position Summary The Level 2 Technicianis responsible forresolving advanced and escalated technical issues, supporting Level 1 technicians, and helpingmaintainconsistent, high-quality service delivery across Managed Services. This role serves as the bridge between frontline support and higher-level technical resources, ensuring issues are investigated thoroughly, documented clearly, and escalated with the right technical context when needed. This position requires broad technical capability across user support, workstations, Microsoft 365, modern IT, legacy infrastructure, networking, cybersecurity tools, applications, and customer environments. The Level 2 Technician supports service improvement byidentifyingrepeat issues, improving documentation, reinforcing technical standards, and helping the team deliver a more consistent and dependable customer experience. Key Responsibilities Advanced Issue Resolution • Resolve advanced and escalated technical issues withinscope., • Troubleshoot issues across users, workstations, Microsoft 365, applications, networking, security tools, remote access, printers, and customer environments., • Own assigned tickets through resolution, reassignment, or proper escalation., • Escalate issues with clear notes, findings, impact, and recommended next steps. Repeat Incident Reduction • Identifypatterns in recurring or escalated issues., • Communicate repeat problems, technical gaps, or process concerns to the Service Delivery Manager orappropriate technicalowner., • Support prevention by documenting known fixes and recommending training, SOP, or standards updates when needed. Technical Documentation Improvement • Maintain clear, useful ticket notes in ConnectWise Manage., • Update IT Glue when documentation is missing, outdated, or inaccurate., • Document resolution details, known fixes, and customer-specific information that help future technicians resolve issues more efficiently. Technical Standards Reinforcement • Follow CTS technical standards when resolving issues., • Identifycustomer environments, tools, configurations, or processes that do not align with CTS expectations., • Escalate standards gaps, unsupported workarounds, or technical risks before they become larger service issues. Autonomy & Decision Boundaries The Level 2 Technician is expected to resolve issues independently within their defined scope, follow CTS technical standards, and escalate when work exceeds their authority, risk level, or technical responsibility. This includes escalating security concerns, major customer-impacting issues, unsupported workarounds, and changes that may affect multiple users, systems, or environments. Technical & Professional Competencies • Microsoft 365:Understands how identity, access, permissions, and sign-in behaviorimpactthe user experience and can escalate complextenant, security, or policy issues with clear technical context., • Modern Cloud & Endpoint Management:Understands how device management, cloud access, endpoint compliance, and remote work toolsimpactthe user experience and can escalate complex configuration, architecture, or policy issues with clear technical context., • Legacy Infrastructure:Understands how traditional infrastructure, identity, permissions, and server dependencies impact daily operations and can escalate complex server, domain, or hybrid environment issues with clear technical context., • Networking:Understands how network availability, routing, access, and device communication impact the customer experience and can escalate complexfirewall, switching, VLAN, ISP, or infrastructure issues with clear technical context., • Cybersecurity:Understands how security controls, user behavior, access policies, and threat activity impact customer risk and can escalate suspected compromise, policy exceptions, or high-risk issues with clear technical context., • Documentation & Escalation Quality:Maintainsclear ticket notes, updatesdocumentation when gaps are found, and escalates with complete context and recommended next steps., • Customer & Team Communication:Communicates clearly with customers and internal teams, supports Level 1 technicians, and contributes to a consistent service experience. Behavioral Target A steady, analytical, and detail-oriented technician who works well within structure, follows standards, documents clearly, and escalates appropriately. This person should be calm under pressure, technically curious, and comfortable supporting both customers and teammates. Success Looks Like The Level 2 Technician resolves advanced and escalated ticketsaccurately;documents workclearly andescalatewith the right technical context when needed. Success is reflected in fewer unnecessary escalations, stronger support for Level 1 technicians, improved documentation, and better visibility into repeat issues or technical gaps. Customers receive dependable support, and the Managed Services team becomes more consistent, efficient, and easier to scale. Total Compensation: Copeland offers a competitive salary and benefits package including: • 401k Plan after 6 months, • Health insurance with an employer contribution to premium day one, • Employer funded Health Reimbursement Account (HRA), • PTO, • Voluntary Dental, Vision, AFLAC options, and a Flexible Spending Account with Medical and Dependent Care options

Job Description Primary Functions: Promotes quality instruction through initial development of EKG course on the Moodle Learning Management System. Performs ongoing updates to program content to align with current industry standards and utilizes good teaching methodology during instruction. Aligns course content based on National Healthcare Association (NHA) requirements for the EKG Technician Certification (CET) Examination. Assists in recruitment, mentoring, and documentation of student clinical requirements. Minimum Qualifications: Current LPN, RN license or an Electrocardiography certification. Evidence of at least two-year of experience in electrocardiography (EKG) and a strong commitment to EKG (and domain of specialty) as a profession. Previous teaching experience is desirable. Job Specific Competencies: • Demonstrates leadership in managing EKG course content knowledge and promotes quality instruction, • Excellent written verbal and written communication skills, • Has working knowledge of electrocardiography curriculum design Essential Job Functions: • Manages the operations of the Electrocardiography program, • Problem solves, • Serves as resource person as needed, • Maintains accurate student records, • Maintains current knowledge in the discipline of Electrocardiography (EKG) Position Specifications and Working Conditions: The physical demands and the work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Minimal physical effort is required. Operate personal computers and related equipment. Travel may be required for making clinical site visitations. Employee needs to be able to drive a private passenger automobile or to arrange for alternative transportation. Reasonable accommodations will be provides for employees with physical limitations. This position is paid by stipend $3,000 per class-one class at a time. Approximately 7 hours per week for 12 weeks, depending on how long it takes to develop the course. Job Posted by ApplicantPro

Want to join the best in pests? Go pro with Orkin.As an Orkin Pro, you'll put the "pro" in protecting what people value most: their home.You'll have more than a jobyou'll have a career with growth potential and benefits that go beyond the basics.This includes a company vehicle, competitive pay, and

As a TC Pro (Home Services Technician), safety is your top priority, both for yourself and the customers you serve.

Cleaner/Grounds/Light Maintenance Technician.