Operations technician jobs in San Antonio, TexasCreate job alerts

JOB SUMMARY: Provide appropriate, efficient and timely pre-hospital basic life support care and transportation of the sick and injured in accordance with local, state, national and Acadian Ambulance standards of practice. EQUIPMENT: Ambulance; stretcher; folding stretcher; scoop stretcher; long and short spine boards and KED; spinal immobilization equipment; radios and computerized communications equipment; splinting devices; suction devices; bandaging materials; oxygen bottles and tubings; basic airway management devices; intravenous fluid therapy equipment; fire extinguisher; simple extrication devices; simple mechanics tools; blood pressure cuff and stethoscope; patient restraints; simple traction devices; other medical and related equipment items not specifically listed may be added as new items are introduced. DUTIES AND RESPONSIBILITIES: Except as specifically noted, the following functions are considered essential to this position. • Conducts a careful examination of the patient for signs and symptoms of illness/injury and assists other medical personnel as necessary., • Administers prompt and efficient basic life support care within the limits of licensure or certification and in accordance with approved protocols prior to and during transport., • Provides careful handling of the patient to and from the ambulance., • Provides safe and efficient transport of the patient in the ambulance to the medical facility., • Provides a safe and efficient transfer of patient and patient care information to the receiving personnel at the destination., • Documents all aspects of patient condition and treatment on EMS run reports. Obtains and records non-medical patient information as required. Completes other patient documentation and forms as required., • Conducts regular unit inventory and equipment testing to ensure all equipment for which the EMT-Basic is responsible is present, clean and in proper working order., • Upon completion of transport, responsible for all assigned duties which will place the ambulance and equipment back in service., • Responsible for full knowledge of the ambulance's basic life support equipment and its proper use at all times., • Documents and reports all needed repairs to the proper maintenance departments (electronic or mechanical) as well as to supervisors and other ambulance personnel as required., • In the absence of other qualified personnel, responsible for the use of basic extrication tools and procedures to gain access to the patient if necessary., • In the absence of other qualified personnel, responsible for controlling the patient's surroundings in such a way as to minimize further danger and control the actions of bystanders., • In both the emergency and non-emergency setting, operates / drives the ambulance in a safe and efficient manner, following company driving guidelines, so the safety or condition of the occupants are not compromised., • Follows all FCC regulations when communicating via electronic communications equipment., • Attends all mandatory meetings as scheduled., • Completes assigned station and station grounds duties., • Orders supplies and equipment from Central Supply to replenish station and ambulance inventories as needed., • Completes assigned ambulance duties (i.e., washing, waxing, interior and exterior cleaning, etc.) as required., • Completes all required company reports and logs and when necessary provides other ambulance and supervisory personnel with the information., • Approved Field Training Officer are responsible for precepting EMT-Basic students as well as new employees as directed., • Must meet and fulfill the qualifications, requirements, functions and responsibilities of the Emergency Medical Technician - Basic job descriptions., • Performs other duties as assigned. These duties, responsibilities, requirements, and conditions are not intended to be all inclusive and may be expanded to include other duties, responsibilities, requirements and conditions. PHYSICAL DEMANDS: Physical activities and the amount of time spent performing each while on this job: AMOUNT OF TIME None Up to 1/3 1/3 to 2/3 Over 2/3 Stand x Walk x Sit x Talk or hear x Use hands to finger, handle or feel x Climb or balance x Stoop, kneel, crouch or crawl x Reach with hands and arms x Taste or smell x Weight lifting requirements and the amount of time spent lifting on this job: AMOUNT OF TIME None Up to 1/3 1/3 to 2/3 Over 2/3 Up to 10 pounds x Up to 25 pounds x Up to 50 pounds x Up to 100 pounds x More than 100 pounds x Vision requirements: X Color Vision (Able to identify and distinguish colors.) X Distance Vision (Clear vision at 20 feet or more.) X Close Vision (Clear vision at 20 inches or less.) X Peripheral Vision (Able to observe areas that can be seen up and down or to the left and right while eyes are fixed on a given point). X Depth Perception (Able to judge distances and spatial relationships.) X Focusing (Able to adjust the eye to bring an object into sharp focus.) Specific job duties which require the physical demands noted above: Lifting of patient from beds or emergency scenes onto stretcher and into ambulance; carrying of patients and equipment; climbing stairs or steps; working in unusual geographic settings such as ditches, hills, embankments, high elevations - natural or manmade; working with small, delicate items such as oxygen tubings, bandaging materials, IV setups when assisting advanced partners, medications, etc.; visually assessing the safety and condition of the emergency scene and the patient; verbally communicating with patients, co-workers, medical personnel and the public either directly or indirectly via electronic communication equipment; driving the ambulance in emergency and non-emergency situations both short and long distances. WORK ENVIRONMENT: Specific situations that lead to environment conditions can include: hazardous materials calls, electrical emergencies, vehicular accidents, outdoor emergency settings, hurricanes, tornadoes, industrial accidents, conditions affecting driving, settings where heavy equipment such as extrication tools are in use, etc. Exposure to environmental conditions and the amount of time exposed to each on this job: AMOUNT OF TIME None Up to 1/3 1/3 to 2/3 Over 2/3 Wet, humid conditions (non-weather) X Work near moving mechanical parts X Work in high, precarious places X Fumes or air borne particles X Toxic or caustic chemicals X Outdoor weather conditions X Extreme cold (non-weather) X Extreme heat (non-weather) X Risk of electrical shock X Work with explosives X Risk of radiation X Vibration X Noise level associated with this job: Moderate Noise (Examples: business office with typewriters and/or computer printers, light traffic). Loud Noise (Examples: metal can manufacturing, large earth-moving equipment). Very Loud Noise (Examples: jack hammer work, front row at rock concert). QUALIFICATIONS: • High School Diploma or GED., • National and/or State certification as an Emergency Medical Technician determined by appropriate state requirements., • Current CPR certification as established by the American Heart Association., • Current and valid state-issued driver's license determined by appropriate state requirements (equivalent of a Louisiana Class "D" driver's license)., • Must be able to read, write and communicate professionally and effectively with employees and managers. Must possess the ability to write simple correspondence or reports. Must possess the ability to effectively present information in one-on-one and small group situations to other employees and/or managers., • Must be knowledgeable of company protocols, operational procedures and safety policies., • Must be able to drive large vehicles in normal and adverse conditions. INTERPERSONAL REQUIREMENTS: • Maintain social, ethical and organizational norms., • Achieve accomplishment of all task details, no matter how small., • Maintain good personal motivation; develop a sense of ownership of job tasks and results., • Must have a sense of urgency for all work performed., • Must maintain professionalism and respect with patients, co-workers, emergency service providers, healthcare workers and the general public. TRAINING REQUIREMENTS: • Orientation to job requirements. Acadian Companies JOB DESCRIPTION Job Title: Emergency Medical Technician Alternate Job Title(s): EMT Division/Department: Acadian Ambulance Service Status: Hourly-Non-Exempt Performance Appraisal Type: Medic REPORTS TO: EMT-IntermediateEMT-Paramedic Operations Supervisor Operations Manager Vice President of Operations All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description SierTeK proudly serves our clients by providing expertise in the Program Management, Information Technology, and Administrative Support domains. Founded in 2007 as a minority and service-disabled veteran-owned company, we serve as prime- and subcontractor for a multitude of Federal Department of Defense contracts. By focusing on continual improvement, our services remain at the forefront of our industry, and we pride ourselves on delivering our services with the highest degree of integrity. SierTeK Ltd. is seeking three (3) Supply Technician/Material Coordinator (Day Shift) to support an opportunity at Randolph AFB. PLEASE APPLY DIRECTLY ON OUR WEBSITE: POSITION OVERVIEW SECTION The Supply Technician / Material Coordinator provides comprehensive material management and tool control support to maintenance operations. This position ensures full lifecycle accountability for hazardous materials (HM), tools, and test equipment, in compliance with Air Force and Department of Defense (DoD) directives. The employee will utilize authorized systems, manage inventories, and support day-to-day logistics functions to maintain compliance, safety, and mission readiness. Essential Job Functions Hazardous Material (HM) Management • Utilize the Enterprise Environmental Safety and Occupational Health – Management Information System (EESOH-MIS) to authorize, order, receive, issue, inventory, and account for hazardous materials., • Generate management reports identifying reorder needs, shelf-life status, inventory counts, and backorder conditions., • Ensure proper storage, labeling, and inspection of hazardous, • Maintain compliance with local environmental management organization (EMO) controls and procedures., • Utilize Tool Control Maximum (TCMax) system where applicable for hazardous material control., • Store hazardous materials only in their original containers and ensure containers are properly labeled and inspected for defects, leaks, and expiration., • Conduct daily inspections of all HM lockers to identify and remove expired, damaged, or leaking materials., • Collect and transfer spent, used, or expired hazardous materials to properly labeled collection containers, coordinating disposal with the appropriate organization., • Manage the tool issue center and ensure all operations comply with AFMCI 21-100V1/V2/V3_AFSCSUP and applicable operational instructions., • Receive, issue, inspect, repair, transport, and dispose of hand tools and Test Measurement and Diagnostic Equipment (TMDE)., • Build, track, and maintain tool kits while ensuring compliance with tool control and Foreign Object Damage (FOD) prevention procedures., • Verify tool issuance only to authorized personnel with valid security badges or letters of authority., • Ensure TMDE items are calibrated and within preventive maintenance (PM) schedules prior to issue; return overdue items for calibration as required., • Operate and maintain satellite tool issue locations to ensure proper stocking and management., • Conduct and document toolbox inventories using Tool Kit Custody Receipt Listings or other required documentation., • Maintain electronic tool and equipment records in Facility and Equipment Maintenance System (FEMS), PMEL SharePoint, and Excel-based tracking systems., • Generate and submit reports on temporary loan tools, overdue/pending items, monthly purchases, and annual template review statuses., • Store, inventory, and manage standard hand tools turned in as excess pending government disposition., • Process manufacturer and vendor warranties for standard and specialized tools., • Categorize, mark, and prepare tools for reuse or Defense Reutilization and Marketing Office (DRMO) turn-in as applicable., • Education: High School Diploma or equivalent., • Skills & Experience:, • Basic computer literacy and ability to use Air Force material management systems (e.g., EESOH-MIS, TCMax, FEMS)., • Solid understanding of supply systems, logistics programs, and relevant Air Force manuals and policies., • Experience with hazardous material handling, environmental compliance, and tool control preferred., • Physical Requirements:, • Must be capable of lifting up to 50 pounds. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, transfer, leaves of absence, compensation, and training. If you need assistance or accommodation due to a disability, you may contact us at 1+833.743.7835.

Job Description Are you looking for an opportunity to work with the world’s leading aviation maintenance and engineering specialist company? We are currently recruiting for an Avionics Technician job in San Antonio, TX. As an Avionics Technician, you’ll have the opportunity to perform maintenance services and modifications for many major airlines and cargo aircraft assisting a team of highly experienced aviation technicians to return aircraft to service safely. Aircraft you'll be working on E190, A300, Boeing 787, Boeing 757 – 3 lines, Boeing 747, MD11 – 2 lines, DC10 Position Overview: Job Location: San Antonio, TX Job Type: Contractor Compensation: $25/hr Per diem: We offer the highest non-taxable per diem in the market (including on overtime) Tools: Toolbox and tools required Hours: Overtime is available Duties: • Experience working on LRU removal & installation, Operational and functional test checks, Avionic troubleshooting on aircraft., • Avionics work on commercial and military aircraft experience., • To install & replace LRU, adjustments, operational and functional test, troubleshooting, and repair avionics systems onboard the aircraft., • Analyze equipment failures to determine causes and recommended corrective action., • Have experience in modifications and routing and wiring with the use of the special tool (Crimping tools)., • Must be able to fabricate and install any wiring harness assemblies., • Should use and operate any Ground Support Equipment (GSE), avionics equipment, VOR & TCAS Equipment tester, pitot & static equipment tester., • Must apply technical knowledge to repair aircraft discrepancies efficiently while properly documenting all work performed., • Must comply with all safety procedures and specifications., • Be able to read wiring diagram and schematic manuals, or any other maintenance manual as (AMM, IPC, SSM, WDM and FIM)., • Interface effectively with members of management, other departments, and co-workers. Qualifications • FAA Airframe and Powerplant Mechanic Certificate (preferred)., • FCC (Preferred)., • At least 3 years of aircraft maintenance experience (Boeing, Airbus, MD-11.), • A valid U.S. Driver’s License. Additional Keywords: Mechanic, Fitter, Mechanic, cabin mechanic, aircraft mechanic, avionics, sheet metal worker, engineer, A318, A319, A320, A321, DC-9, MD-80, MD-90, CAE, B1, NDT, sheet metal, B2, B1.3, B757, B717, B737, B757, B767, EMB 145, EMB 135, MD -11, jet2, management, captain, cabin crew, first officer, quality, ATR, airworthiness, safety, manager, composite, technician, avionic, aw139, aircraft technician, operations, aircraft fitter, B1 engineer, flight dispatcher, maintenance, Embraer, painter, aircraft engineer, instructor, logistics, camo, fitters, cabin mechanic, director, AP mechanic, airframe mechanic, QA, QC, inspector, OEM, MRO

Job Description Employment Type: Full time Our Service Managers are high energy professionals who not only lead by example, but are also a team player who supports the employees that work for them. A Service Manager performs many different roles as they manage the day-to-day operations of one of our centers, including: generating sales, communicating with customers, building client relationships, managing the technical team, and ensuring that all employees are adhering to company policies and procedures. Position Responsibilities: · Meeting and greeting customers · Managing technician workflow · Recommending services to customers · Ordering parts and inventory · Keeping customers updated on the status of their vehicles' repairs · Managing and tracking lead counts as well as customer satisfaction ratings · Generating and closing sales · Deliver a high level of customer service and quality control over all aspect of the center's business, operations, and work product What We Offer: · Competitive Compensations package · Ongoing training and field support · Daytime work hours · Paid time off · Growth opportunity JOB REQUIREMENTS · Minimum of 5 years of automotive service sales experience OR equivalent sales experience with a track record of success. Transmission sales is a big plus. · Excellent one time closing skills · Strong commitment to customer service and relationship building · Ability to communicate and use interpersonal skills at a sustained high level · Capable of multi-tasking and executing in a fast paced environment · Honest, goal-oriented and energetic team player · Must have valid driver's license Powered by JazzHR kteilQyrt9

Job DescriptionSalary: $28 - $32 DOE The Company: At Quantum Leap, our mission is to cultivate a culture of belonging where both our communities and our people are well cared for. Through positivity, open communication, and commitment to quality, we create spaces that feel like home. Our culture of care extends to every part of the Quantum Leap Multifamily Group. This translates to safe and profitable investments for our partners, a positive and purposeful workplace for our employees, and a dedication to giving back to the communities we serve. We are looking for service-oriented individuals who are passionate, motivated, hard-working, and effective! The Position: The Lead Maintenance Technician oversees all property maintenance operations, including corrective, preventative, routine, emergency, cosmetic, and make-ready tasks. Skills in HVAC, plumbing, and electrical systems are essential for resolving complex issues and ensuring property functionality. This role also involves mentoring the team to improve performance and uphold property standards. Responsibilities: • Supervises and ensures the proper maintenance of the property and grounds based on Quantum Leap and property objectives, • Safely supervises and directs maintenance staff, • Maintains property operating budget, including creating PO and getting prior approval for all purchases, • Review work orders, prioritize and complete in a safe and timely manner, • Ensure all work orders are responded to within 24 - 48 hours, • Develop schedules, coordinate and manage make-ready program for the property in conjunction with the property manager and property staff, • Coordinate with vendors and contractors to complete work in a safe and timely manner, • Properly secure and care for property equipment and supplies, • Implement preventative maintenance plan, • Walk property weekly, identify maintenance & safety related issues and manage repair process, • Ability to be on call for after-hours emergencies Qualifications: • Strong knowledge and skills in HVAC, plumbing, and electrical required, • A minimum of 2 years of related experience, • EPA or HVAC certification required, • CPO certification preferred Why do you want to join our team? * Medical, Dental, Vision and Supplemental Insurance Plans * Wellness Initiatives and Incentives * Competitive PTO package with additional paid time off for volunteering * Paid day off for birthday * Employee Rental Discounts * Employee Referral Program * Performance based bonuses Employment with Quantum Leap Properties is contingent upon the successful completion of a background check and drug screen. Quantum Leap Properties is an Equal Opportunity Employer. #quantumHP

Job Description An Automotive Service Manager takes on many different roles as they manage the day-to-day operations including: generating sales, communicating with customers, building client relationships, and managing the technical team. Position Responsibilities: • Perform a high volume of warm calls to potential customers (must have excellent phone sales and the ability to complete a one-call close), • Engage and consult incoming customers, both in-person and over the phone, to successfully generate and close sales., • Meet, greet, and recommend services to customers., • Manage technician workflow and the status of the customers vehicles’ repairs., • Order parts and inventory., • Daytime work hours, • Growth opportunity, • Competitive pay = 100% Commission, • Minimum of 2+ years of sales experience, • Strong commitment to customer service and relationship building., • Ability to communicate and use interpersonal skills at a sustained high level., • Capable of multi-tasking and executing in a fast-paced environment., • Coachable, honest, and goal-oriented team player., • Must have a valid driver's license.

Job Description Premier1 Auto Care is a family owned and operated business. We are seeking to add a Service Advisor to our team whom shares our value of offering the best possible experience for our clients, each and every time! As a Service Advisor, you will own our customers' experience in the service lane. You are the first point of contact with our customers and will be well-versed in product offerings, inventory needs, technician scheduling and customer service. From greeting vehicle owners on the drive to explaining the repair process, our Service Advisors are true professionals who enjoy helping others. Prior Service Consultant experience is preferred, however car enthusiasts with a willingness to learn will be considered. Our #1 requirement is that you have an attitude and work-ethic that aligns with our core values (Honesty & Integrity, Transparency, Teamwork and Respect, Continuously strive to be the best). Premier1 Auto Care offers a competitive benefits package including Healthcare, Vision, Dental and other benefits, as agreed upon. Women and minorities are encouraged to apply. Premier1 is an Equal Opportunity Employer. Job responsibilities to include (but not limited to): • Be an ambassador for the Premier1 Automotive brand and its core values, • Greet/respond to customers in person, on the phone, or email using established guidelines and processes, • Follow-up with customer inquiries within 10 minutes, • Document customer concerns, open service ticket, and work with Technicians and Operations Manager to assign ticket to technician as appropriate, • Communicate vehicle diagnosis, repair recommendations, and regular status updates to customers in a timely manner, • Follow-up with customers to ensure their repair and service needs are met, • Meet and Exceed customer service expectations of our customers every time, • Order parts, • Other duties and responsibilities, as assigned We offer: • Benefits package including Healthcare, dental, vision, retirement savings (w/company match), • A one-of-a-kind business, designed from the ground up around its customers and employees, • A new and state-of-the art facility featuring a children's play area, Wi-Fi, massage chairs, and other amenities, • Industry leading training and career development opportunities Requirements: - High-school diploma or equivalent - Solid track record of providing exceptional customer service -Must be able to work in a fast paced environment - Automotive experience strongly preferred - Have a valid driver’s license and maintain a safe driving record - Be able to pass a pre-employment screening including a background check. Premier1 promotes a drug-free work environment. Job Type: Full-time Pay: $60,000.00 - $100,000.00 per year Benefits: • 401(k) matching, • Dental insurance, • Employee discount, • Health insurance, • Paid time off, • Vision insurance Schedule: • Day shift, • Monday to Friday, • No weekends Ability to commute/relocate: • San Antonio, TX 78232: Reliably commute or planning to relocate before starting work (Required) Experience: • Service Advisor: 2 years License/Certification: • Driver's License (Required)

Job Description Shift Available: 3p - 11p POSITION SUMMARY: The Lead Mental Health Technician oversees daily shift operations and staff to ensure safe, therapeutic, and structured care, reporting directly to the Mental Health Technician Manager. This role supports clinical goals through direct patient care, supervision, and crisis intervention. The position also collaborates closely with the Director of Nursing to maintain a cohesive, patient-centered care environment. JOB-SPECIFIC RESPONSIBILITIES: • Service o Consistently supports and communicates the Mission, Vision, and Values of Nexus Health Systems o Upholds the Standards of conduct and corporate compliance o Demonstrates honest behavior in all matters. To the best of the employee’s knowledge and understanding, complies with all Federal and State laws and regulations. o Maintains the privacy and security of all confidential and protected health information. Uses and discloses only that information which is necessary to perform the function of the job. o Adheres to all Nexus Health Systems policies on Health Insurance Portability and Accountability Act (HIPAA), designed to prevent or detect unauthorized disclosure of Protected Health Information (PHI) o Collaborates effectively with colleagues and other departments to ensure seamless service delivery. • Clinical Excellence o Overall responsible for the shift, ensuring adherence to policies and procedures, and completion of necessary documentation. o Manages and directs mental health technicians on shift. o Manages shift schedules to reduce overtime. o Provides support to mental health technicians in appropriate therapeutic interventions. o Manages and ensures adherence to the daily schedule for residents, including adequate supervision. o Reports concerns regarding training or compliance to the Mental Health Technician Manager. o Provides care that promotes safety, comfort, and a therapeutic environment. o Directs supervision of patients/residents. o Prevents and manages crisis situations, including verbal conflicts and emotional dysregulation. o Role models appropriate behaviors, attitudes, social skills, and self-care. o Reinforces therapeutic treatment goals through Positive Behavior Interventions and Supports. o Utilizes de-escalation skills for verbal de-escalation and containment. o Assists residents with activities of daily living and providing crisis intervention as needed. o Leads milieu activities for non-clinical groups and participates in activities for the clinical groups. o Participates in the development and implementation of patient treatment programs. o Maintains age-appropriate rules and enforcing behavioral management systems. o Observes clinical staff methods and participating in treatment plan implementation. • Patient Experience and Advocacy o Transports patients to and from appointments and treatments as appropriate. o Maintains a therapeutic environment that respects patient dignity and promotes comfort. o Role models positive behaviors and social skills. o Ensures confidentiality of patient records. • Quality Assurance and Compliance o Ensures all activities adhere to healthcare regulations and organizational policies. o Participates in quality improvement initiatives to enhance service delivery. o Promotes a culture of patient safety which results in the identification and reduction of unsafe practices. o Completes all required documentation accurately and timely. o Maintains established institutional policies and procedures, including quality assurance programs and safety standards. o Adheres to facility policies and procedures. • Professional Growth and Continuing Education o Completes annual education requirements. o Maintains competency, as evidenced by completion of competency validation requirements. o Maintains competency and knowledge of current standards of practice, trends, and developments. o Participates in relevant workshops, seminars, and continuing education courses to stay current with industry trends, healthcare regulations, and best practices. o Attends and participating in training, in-service education, and staff meetings as scheduled. o Enhances professional growth through educational programs, current literature, and workshops. • Finance o Promotes stewardship of hospital resources while ensuring quality patient care. o Managing shift schedules to reduce overtime, thereby controlling labor costs. • Performs other duties as assigned. POSITION QUALIFICATIONS: EDUCATION: • High school diploma or equivalent (required), • AA/BA/BS Psychology, Education, or related social service field (preferred) EXPERIENCE: • Two (2) years of experience in a behavioral health, residential, human services field or 2 years of college (required), • Experience in residential care or mental health treatment (preferred) SKILLS: • Models strong interpersonal skills and emotional resilience in high-stress environments., • Maintains professional boundaries and mentors staff in therapeutic communication., • Expert in de-escalation techniques (e.g., SAMA), guiding real-time responses to crises., • Trains and supports staff in trauma-informed intervention strategies., • Leads shift planning with advanced time management and prioritization., • Identifies workflow issues and implements practical, team-based solutions., • Excels in clear, professional written and verbal communication., • Ensures accurate EHR documentation and coaches staff on documentation standards., • Advanced proficiency in EHR systems (e.g., Meditech) and Microsoft Office Suite., • Supports team training and troubleshooting on digital platforms., • Applies healthcare and psychiatric terminology accurately in all communications., • Promotes understanding of clinical language among direct care staff. LICENSURE/CERTIFICATION: • First Aid and CPR, • De-escalation training within 30 days after hire., • Maintain current certification in good standing during employment with this facility or obtain it within thirty (30) days of hire.

Job Description Come make your mark with Watermark! 🎖️ FOUNDED BY USAF VETERANS in 2007, we are proud to be a Service-Disabled Veteran Owned Small Business. 🌎 SUBJECT MATTER EXPERTS specializing in security and risk management. We’re intimately familiar with DOD security programs and mission requirements. ⭐ OUR CORE VALUES drive every action we take as a company. We strive to exhibit PERSPECTIVE, PASSION, COMMUNICATION, INTEGRITY AND ETHICS, and BALANCE in all we do. 💲 COMPETITIVE BENEFITS PACKAGE to address our employees’ physical, mental, emotional, and financial well-being. This includes 100% employer- paid medical insurance, ample paid leave, a free employee assistance program, and a competitive 401k savings plan. At Watermark, our people come first! Information Systems Security Officer III The ISSO is responsible for ensuring the appropriate operational security posture is maintained for an information system and as such, works in close collaboration with the ISSM and ISO. The position shall have the detailed knowledge and expertise required to manage the security aspects of an information system and, in many organizations, is assigned responsibility for the day-to-day security operations of a system. This also will include physical and environmental protection, personnel security, incident handling, and security training and awareness. It will be required to work in close coordination with the ISSM and ISO in monitoring the information system(s) and its environment of operation to include developing and updating the authorization documentation, implementing configuration management across authorization boundaries. This will include assessing the security impact of those changes and making recommendation to the ISSM. The primary function is working within Special Access Programs (SAPs) supporting Department of Defense (DoD) agencies, such as HQ Air Force, Office of the Secretary of Defense (OSD) and Military Compartments efforts. The position will provide “day-to-day” support for Collateral, Sensitive Compartmented Information (SCI) and Special Access Program (SAP) activities. In this role you will… • Develop physical or logical topologies for a system, • Assist the ISSM in meeting their duties and responsibilities, • Prepare, review, and update authorization packages, • Ensure approved procedures are in place for clearing, sanitizing, and destroying various types of hardware and media, • Notify ISSM when changes occur that might affect the authorization determination of the information system(s), • Conduct periodic reviews of information systems to ensure compliance with the security authorization package, • Coordinate any changes or modifications to hardware, software, or firmware of a system with the ISSM and AO/DAO prior to the change, • Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly, • Ensure all IS security-related documentation is current and accessible to properly authorized individuals, • Ensure audit records are collected, reviewed, and documented (to include any anomalies), • Attend required technical and security training (e.g., operating system, networking, security management) relative to assigned duties, • Execute the cyber security portion of the self-inspection, to include provide security coordination and review of all system assessment plans, • Identify cyber security vulnerabilities and assist with the implementation of the countermeasures for them, • Prepare reports on the status of security safeguards applied to computer systems, • Perform ISSO duties in support of in-house and external customers, • Conduct continuous monitoring activities for authorization boundaries under your preview, • Assist Department of Defense, National Agency and Contractor organizations with all RMF efforts, • 5-7 years related experience, • Current Top Secret Clearance with SCI Eligibility, • Eligibility for access to Special Access Program Information, • Reports to a physical location which occasionally requires the ability to traverse between buildings, • May require sedentary work at least 50% of the time, • Must be able to regularly list up to 50 lbs, • Ability to manage stress with a high degree of maturity/professionalism, • Demonstrated critical thinking and leadership skills and the ability to work well with others, • Effective verbal and written communication skills, • All Level I & Level II positions - candidate should possess some Special Access Program (SAP) experience Watermark is an equal opportunity employer. All terms and conditions of employment are established without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, veteran status, or any other protected category under applicable federal, state, and local laws. Powered by JazzHR AQDT2oStJN

Job Description Job Summary Inside Plant Technician (ISP) a telecommunications specialist / system administrator responsible for the installation, maintenance and repair of telecommunications infrastructure within buildings and facilities. Locations are in Italy Bristol Alliance of Companies (Bristol) is committed to building lasting relationships that reflect our hard work, ingenuity, and dedication to safety. Every employee has an impact on our success, which benefits the Native Culture, land, and people of the Bristol Bay region. Our values: People, Communities, Reputation, Teamwork, Trust, and Truth. Essential Functions • Operate the telephone maintenance console to install new telephone extensions, perform programming changes on telephone numbers, set/change class of service, and to activate/deactivate special features., • Troubleshoot and restore telephone services, system and ancillary equipment outages including services provided by commercial telephone provider. Contractor shall coordinate troubleshooting end-to-end circuit problems, whether operated and maintained by US Government, foreign, or commercial companies, • Ability to use electronic tests and repair equipment on telecommunications systems., • Ability to clean and handle delicate electronic equipment., • Ability to follow oral and written instructions., • Ability to establish and maintain effective interpersonal relationships., • Ability to effectively communicate orally and in writing to convey technical information in non-technical teams., • Individual shall possess a minimum of five (5) years’ experience in operation and maintenance of tactical, or commercial, telecommunications equipment Must perform duties in a professional manner in accordance with industry best practices., • Experienced with O&M of Cisco Unified Communication Manager (CUCM) software, • Security + and Cisco Certified Network Associate (CCNA) voice certification, • Minimum 1 year experience operating and maintaining SL-100 (Automated Telephone Switch equipment), • Minimum 1 year experience operating and maintaining Option 61C (Automated Telephone Switch equipment), • Experience of operation, maintenance, database management, installation, troubleshoot and inspection of T-2/ VOIP Technology, • Familiarity with DoDD 8140.1 Cyberspace Workforce Management and M5239 (series) DON Cyberspace IT and Cybersecurity Workforce Management and Qualification, Defense Cyber Workforce Specialty Code 441, Journeyman level of expertise., • Personal Computer (PC) operations at the Operator level., • Maintenance and Material Management (3-M) program or commercial equivalent., • DISA and military directives applicable to communications station operations of SL-100 and Option 61C automated telephone switch components., • Certificate of successful course completion from OEM authorized training facilities for SL-100, and for Option 61C (both are Automated Telephone Switch equipment)., • Ability to obtain a security clearance., • Valid driver's license., • Experienced with O&M of Cisco Unified Communication Manager (CUCM) software, • Security + and Cisco Certified Network Associate (CCNA) voice certification, • Experience of operation, maintenance, database management, installation, troubleshoot and inspection of T-2/ VOIP Technology, • Active DoD security clearance The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Position may be subject to both inside and outside environmental conditions, noise sufficient to cause the worker to shout., • Position may be subject to a variety of physical conditions – proximity to moving mechanical parts, moving vehicles, electric current, working on scaffolding and high places, exposure to high heat or exposure to chemicals., • Position may be subject to atmospheric conditions – fumes, odors, dusts, mist, gases, or poor ventilation. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Mobility: must be able to stoop, kneel, reach, walk, lift, grasp, feel, talk, hear, and perform repetitive motions., • Hearing: must be able to hear audible safety alarms., • Visual Acuity: must be adequate to perform the above listed tasks in a safe manner and perform activities such as viewing a computer terminal and extensive reading. Excellent salary and benefits package to include paid time off, paid holidays, comprehensive health plan including medical, dental, vision, life, short-term disability insurance, and 401(k) plan with employer match. Equal Opportunity Employer Statement Bristol companies are equal opportunity employers and offer any available positions to all, without regard to race, color, religion, sex, national origin, age, disability, veteran status, parenthood, pregnancy, marital status, or changes in marital status, in accordance with applicable state and federal laws. This applies to recruitment, placement, pay, benefits, training, employment status changes, social and recreational programs, and other conditions and benefits of employment. Bristol grants employment preference first to BBNC and Choggiung shareholders, their spouses, or descendants, and second to Alaska Native Corporation shareholders in accordance with P.L. 93-638. Disclaimer This job description is not intended to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice. This job description is not a contract or employment. It does not promise or guarantee any particular benefit or specific action. All employment with Bristol is “at-will” which means that Bristol or employee can terminate the employment relationship at any time with or without cause.

Job Description SierTeK proudly serves our clients by providing expertise in the Program Management, Information Technology, and Administrative Support domains. Founded in 2007 as a minority and service-disabled veteran-owned company, we serve as prime- and subcontractor for a multitude of Federal Department of Defense contracts. By focusing on continual improvement, our services remain at the forefront of our industry, and we pride ourselves on delivering our services with the highest degree of integrity. SierTeK Ltd. is seeking a Lead Supply Technician (Swing Shift) to support an opportunity at Randolph AFB, TX. PLEASE APPLY DIRECTLY ON OUR WEBSITE: POSITION OVERVIEW SECTION The Lead Supply Technician provides comprehensive logistics, supply chain, and material handling support to aircraft maintenance operations. The employee ensures efficient ordering, receiving, storage, and issuance of aircraft parts and bench stock to meet mission requirements. This position supports maintenance production activities by maintaining accurate inventory levels, coordinating with supply systems, and ensuring timely delivery of required materials. Essential Job Functions Material Handling & Inventory Management * Order, receive, store, issue, and transport aircraft parts, tools, and bench stock. * Conduct regular inventories and maintain accurate records of stored materials. * Determine stock levels for recurring and specialized items based on usage, project demands, and operational requirements. * Use authorized Air Force material ordering systems to order, track, and manage common and specialized items used on military weapon systems. Maintenance Support & Customer Service * Provide material research, order placement, and handling support to designated maintenance shops. * Maintain adequate on-hand stock levels to meet production needs; ensure timely replenishment of bench stocks. * Record issued items and quantities in written or electronic logs. * Research and analyze Bench Stock Levels (BSLs), recommend adjustments to optimize stock accuracy and efficiency. Specialized Support Activities * Deliver and pick up materials at depot supply points and outlying locations as needed. * Inspect and operate general and special-purpose vehicles, including forklifts; document inspections using AF Form 1800. * Perform manual lifting of up to 50 pounds. * Provide material management support for repair, overhaul, manufacture, and/or modification of specialized equipment and parts. Coordination & Communication * Respond to unique or urgent material requests requiring additional data verification or expedited procurement. * Ensure all item data (e.g., part numbers, pricing, and stock codes) is accurate and complete. * Coordinate material delivery dates and provide customers with order status updates. * Manage back orders, cancellations, and repairable turn-ins to maintain supply chain integrity. * Review and process excess materials for credit return. * Serve as a material management representative on the Tail Team/Integrated Product Team (IPT). * Support the Awaiting Parts Program (AWP) and participate in Rapid Improvement Events and Art of the Possible (AoP) initiatives. Qualifications Minimum Position Requirements * Education: High School Diploma or equivalent. * Experience: * Working knowledge of supply systems, inventory control processes, and Air Force logistics operations. * Familiarity with applicable supply chain policies, manuals, and work methods. * Skills: * Basic computer proficiency and ability to use supply and tracking systems. * Strong attention to detail, organization, and communication skills. * Physical Requirements: * Ability to lift up to 50 pounds. * Operate forklifts and general/special-purpose vehicles safely. SierTeK is an equal opportunity employer. Employment is decided based on qualifications, merit, and business need. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran status, gender identity and sexual orientation. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, transfer, leaves of absence, compensation, and training. If you need assistance or accommodation due to a disability, you may contact us at 1+833.743.7835.

Job Description Duties & Responsibilities: Technical Expertise – • Mechanical aptitude, • 3-5 years alarm security experience preferred, • Install and service DMP alarm panels, • CCTV experience, • Access Control experience, • Basic computer skills including experience with, • Excel, • Perform preventive maintenance inspections and service, • Insure that documentation is properly completed and submitted, • Assist other technicians as needed, • Request and share technical knowledge, • Escalate and resolve issues when appropriate, • Recognize recurring trips to same site for the same issue and report to management, • Minimize number of trips to the site to resolve the issue, • Access part needed before going if possible, • Performs service and installation of access control, intrusion alarm, video surveillance systems, and other various security related systems., • Performs upgrades and additions to systems in order to increase functionality and usability., • Performs computer program entry as required to add cameras, access control devices, and intrusion alarm systems as needed., • Coordinates with administration for the purpose of completing projects/work orders efficiently., • Provides documentation in electronic formats (e.g. notes regarding the service call, time and materials, etc.) for the purpose of providing written support in compliance with company procedures and/or conveying information., • Maintain and control inventory, • List parts accurately and timely on work orders, • Keep truck stock by being proactive in replenishing, • Anticipate parts required to meet or exceed goals., • Requests equipment and supplies to the Inventory Specialist Technician to review and submit to Purchasing., • Report inventory on truck monthly, • Communications, • Respond to all phone calls from other SCI personnel within four hours, • Respond to all emails within 24 hours, • Recognize that you are effecting others productivity by not responding or expecting them to contact you numerous times for the same issue, • Time Keeping, • Accurate reporting of dispatch, arrival and completion times, • Recognize that this data is analyzed and some customers receive reports based on response and resolution, • Input and categorize time not spent on work orders accurately, • Maintain Security License by adhering to annual continuing education requirements, • Ability to pass criminal background check and drug screen test, • Valid Driver’s License and insurance, • Maintaining confidentiality of work related information and materials., • Effective organization and planning skills., • Customer Service, • Strong customer service skills, • Effective communication and interpersonal skills, including tact and diplomacy., • Ability to perform with bank personnel present and occasionally under pressure, • Good judgment in what is appropriate to say and do, • Instruct Bank personnel in use of equipment, • Ability to multi-task and time management skills, • Perform tasks requiring bending, stooping, kneeling, standing, and walking significant distances., • Active Listening -- Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times., • Ability to understand and follow instructions precisely, • Loud environment with multiple distractions at any given time. hnTOCdziSQ

Job Description 1st Shift Hours 7am - 3pm Company Overview Improved Piping Products, Inc. is a leading manufacturer of HDPE pipe fittings and flanges. We are committed to delivering high-quality products through innovation, teamwork, and a strong focus on safety. Join our growing team and be part of a company that values your skills and dedication. Job Summary We are seeking a highly skilled Robotics Technician to support and maintain our robotic and automated systems. This role involves programming, troubleshooting, and optimizing robotic equipment to ensure maximum efficiency, safety, and product quality. Key Responsibilities • Modify and program computer-controlled robotic movements., • Build and assemble robotic devices and automation systems., • Maintain inventory of production supplies (e.g., sensors, cables)., • Develop robotic path motions and 3D simulations for process optimization., • Perform preventive and corrective maintenance on robotic systems., • Maintain detailed service records and documentation., • Train team members on robotic operation and maintenance., • Troubleshoot robotic systems using knowledge of PLCs, electronics, hydraulics, pneumatics, and sensor systems., • Test robotic assemblies using diagnostic tools (oscilloscopes, voltmeters, etc.)., • Install, program, and repair robotic controllers, end-of-arm tools, and conveyors., • Disassemble and reassemble robotic systems to replace or repair components (e.g., circuit boards, sensors, servomotors)., • Evaluate and calibrate robotic systems for optimal performance and reliability., • Experience in robotics, automation, or industrial maintenance required., • Strong understanding of programmable logic controllers (PLCs) and robotic systems., • Proficiency with diagnostic tools and mechanical/electrical troubleshooting., • Ability to read technical diagrams and perform complex system repairs., • Competitive hourly pay, • Health, dental, and vision insurance, • Paid time off and holidays, • Opportunities for growth and advancementCompany DescriptionImproved Piping Products, Inc. (IPP) was founded in 1979 and is a privately held family business. Our Production plant, Corporate Offices, and Warehouse are all located in San Antonio, Texas. IPP's fittings are sold to customers world-wide in various industries.Improved Piping Products, Inc. (IPP) was founded in 1979 and is a privately held family business. Our Production plant, Corporate Offices, and Warehouse are all located in San Antonio, Texas. IPP's fittings are sold to customers world-wide in various industries.

Job Description About the Role Transwest Mobile is seeking a highly motivated and experienced Service Manager to oversee daily operations at our San Antonio/Converse service location. This leadership role is responsible for managing service order workflow, supervising technicians, ensuring outstanding customer service, and maintaining safety, efficiency, and compliance standards. Key Responsibilities • Oversee day-to-day operations of the service department, including scheduling, workflow, and productivity., • Supervise, support, and develop service technicians to ensure high performance and quality work., • Manage repair orders, ensure timely completion of jobs, and maintain accurate documentation., • Maintain a strong focus on customer satisfaction by handling escalations, managing expectations, and ensuring timely communication., • Coordinate with parts, sales, and operations teams to ensure smooth and efficient service delivery., • Ensure compliance with safety regulations, company policies, and industry standards., • Monitor shop performance metrics and implement process improvements as needed., • Assist with hiring, training, and performance management of service personnel., • Proven experience in a Service Manager, Shop Manager, or similar leadership role in a mechanical, diesel, or fleet service environment., • Strong leadership, team-building, and communication skills., • Excellent organizational and problem-solving abilities., • Familiarity with service management software (Fullbay experience preferred)., • Technical knowledge of diesel, mechanical, or automotive repair. Proficiency with basic computer systems * Experience with shop scheduling and technician workflow * Knowledge of DOT and OSHA safety regulation * Why Transwest Mobile? * High-Impact Work: Lead complex repairs and keep critical fleets operational. * Elite Culture: Join a team that values expertise, innovation, and collaboration. Dental Insurance * 401(k) * Life and Disability Insurance * Paid Time Off, Sick Leave, and Holidays About Us Since 2009, Transwest Mobile has redefined fleet productivity with innovative mobile repair services across Arizona, California, Nevada, Texas, and Utah. Our flawless safety record, $3M liability insurance, and 24/7 availability make us the trusted choice for field-ready repairs. Join us to drive efficiency, capability, and safety in every job. Ready to Lead? Apply now to join a team that values mastery and pushes the industry forward. Let’s keep fleets moving together! Visit transwestmobile.com f You should be proficient in: • Customer Service, • Project Management, • Supervisory Experience, • Automotive Repair, • Service Advisor/Writer, • Engine Repair, • Scheduling Experience, • Basic Computer Skills

Job Description Job Description: Pilot Plant Instrumentation Technician Position Summary The primary role of the Pilot Plant Instrumentation Technician is to install, test, repair, maintain, and inventory pilot plant instrumentation and equipment. This position supports both equipment reliability and pilot plant operations, ensuring all devices are properly calibrated, documented, and functioning safely and efficiently. A secondary responsibility includes assisting with the construction and operation of pilot plants and supporting electrical, mechanical, and control system tasks. Primary Duties & Responsibilities Instrumentation & Equipment Responsibilities • Install, test, repair, and maintain pilot plant instrumentation such as:, • Pressure transducers, • Thermocouples, • Scales, • Flow controllers, • Other related measurement devices, • Install, maintain, and repair mechanical and electrical equipment including pumps, motors, and heaters., • Maintain accurate calibration records for all instrumentation., • Assist with wiring, wire diagrams, control system setup, and troubleshooting., • Support control software setup and configuration., • Assist with construction of pilot plant systems using pipe, tubing, AC/DC powered equipment, and related components., • Support ongoing pilot plant operations as needed. Education • Hands-on experience with mechanical and electrical systems., • Required experience with refinery or plant instrumentation and AC/DC power systems., • Experience in pilot plant or demonstration-scale operations preferred., • Strong troubleshooting and problem-solving abilities., • Proficiency with Microsoft Excel and Word., • Ability to read, understand, and work from wiring diagrams and technical drawings., • Must be able to work a 24/7 shift schedule as needed., • Must have a valid MVR (Motor Vehicle Record)., • Steel-toed safety shoes are required., • Dress code: Collared shirt and jeans., • Standard schedule: Monday – Friday, 8:00 AM – 5:00 PM, with flexibility for shift work as required. Join the Cross Resource Group Team! At Cross Resource Group, we value our employees and are dedicated to providing a rewarding and inclusive work environment. We are proud to offer a competitive and comprehensive benefits package to meet the diverse needs of our team. Employee Benefits Include: • Healthcare Insurance: Comprehensive coverage to ensure access to quality healthcare., • Dental Insurance: Robust coverage for optimal oral health., • Vision Insurance: Regular exams and corrective lenses covered., • Disability Insurance: Short and long-term coverage protecting against loss of income due to illness or injury. Become a part of a dynamic team committed to professional growth and development. Explore our job openings and experience the rewards of being part of a company that values your health, happiness, and success.

Job DescriptionDescription: We are ERock! Enchanted Rock is a leader and innovator of Electrical Resiliency-As-A-Service. Our advanced dual-purpose microgrids protect companies, critical infrastructure, and communities from unexpected power outages, ensuring business continuity and civic durability. Enchanted Rock’s dual-purpose microgrids use natural gas and renewable natural gas (RNG) to drive the nation’s most dependable microgrids — all while producing significantly lower to zero carbon emissions than traditional diesel backup generators. Powered by GraniteEcosystem™, our revolutionary software system, Enchanted Rock solutions provide 24/7/365 monitoring, optimization, and forecasts to enable worry-free, reliable power for businesses. The Enchanted Rock solution brings together patented technologies, advanced dual-purpose microgrid designs and integrated end-to-end services. The Power is On and we keep it on. What you’ll do… We are seeking a skilled Electrical Technician, Automation & Controls to support the integration, commissioning, and optimization of generator packages and electrical systems within advanced microgrid projects. This role is hands-on and dynamic, requiring expertise in automation, controls, and system performance to help ensure reliable, safe, and compliant operations. This is a field position based out of San Antonio, Texas and will report directly to the Manager of Automation & Controls Engineering. You’ll make an impact by: System Integration & Commissioning • Contributing to the integration of generator packages, switchgear, and electrical systems in line with project specifications, safety protocols, and timelines., • Carrying out and validate cable schedules, control packages, and system testing protocols., • Supporting the transition from construction to commissioning and operations teams by confirming integration requirements are met., • Tracking and closing punch list items by documenting deficiencies and assisting with resolution., • Assisting in troubleshooting automation, protection, and control systems (e.g., Schneider PLCs, DeepSea Controllers, ABB Relays, SEL devices)., • Participating in the development and delivery of training for site personnel and contractors on microgrid operations, controls, and start-up procedures., • Communicating progress and technical findings with project management and integration teams., • Using tracking tools to update key milestones, risks, and solutions., • Contributing to identifying risks and ensuring compliance with SHE standards, company protocols, and regulatory requirements., • Have strong analytical and have problem-solving abilities in automation and control systems., • Are collaborative and effective working style with team members and contractors., • Are proactive, self-motivated, and eager to take ownership of tasks., • Are flexibile and able to adapt to shifting project requirements and deadlines., • Have hands-on background in technical fields related to power generation, electrical construction, and commissioning., • Are committed to safety, reliability, and operational excellenceRequirements: What you’ll need: • 3+ years of experience in the energy sector (or equivalent electrical experience), with emphasis on power generation, automation, and controls., • Associate’s degree (desired) in electrical, automation, or related technical discipline., • Knowledge of microgrid operations, system integration, and applicable codes/standards., • Hands-on experience with control and protection equipment such as: Schneider PLCs, DeepSea 8660 & 8610 Controllers (or equivalent), or ABB 615 Relay, SEL 700G, SEL 700GT, SEL RTAC, • Experience working across multiple stages of project execution., • Medical, Dental, Vision, and Prescription Drug Insurance, • Company-Paid Life Insurance, • Flexible Spending Account (FSA), • Health Savings Account (HSA), • Wellness Programs and Incentives, • 401(k) Retirement Plan & Company Match, • Paid Time Off – Sick & Vacation Time The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Enchanted Rock is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. At Enchanted Rock, we embrace diversity, including all the unique characteristics that make us human: race, age, sexual orientation, gender identity, religion, disability, and education — to name a few. We understand and recognize that diverse backgrounds and perspectives strengthen our teams and our business. The foundation of our diversity efforts is closely tied to our core values, specifically our value of “The Team”, which includes “Mutual Respect, Openness, and Honesty.”

Job Description • Please note that this is for an upcoming position. We are, however, accepting applications for this anticipated need. If you are interested in joining The Building People, we encourage you to APPLY TODAY! The Building People, LLC, has a position open for a full-time Senior Building Controls Technician to provide services related to the expansion, upgrade or replacement of building automation hardware and software for smart building infrastructure. The position will work independently to meet project requirements with limited supervision. The programmer will be responsible for programming, configuring, and testing of Direct Digital Control (DDC) building automation and control systems. Responsibilities/Duties • Design and engineer control system hardware and software programming based on project plans, specifications, and other contract documents, • Ability to program projects with various levels of complexity, • Capable of performing network troubleshooting, database troubleshooting and repair programming, • Collaborates with the engineering team on the system configuration, network and software requirements, graphics, programming, and sequences of operations, • Develop and configure the sequence of operations, programming, graphics, database, network, and integrations into third party systems, • Maintains accurate and thorough project documentation and redlines, • Provides owner training as required by the project, • Executes system commissioning and functional testing, • Assist in installation of control hardware, • Startup and commission new hardware installations, • Provide project management assistance on projects as required, interfacing directly to customers, • Supervise sub-contractors and suppliers as needed Required Skills * Excellent verbal and written communication skills * Proficient in Microsoft Office Suite or related software * Programming skills * Strong analytical skills * Strong interactive and communication skills * Strong troubleshooting skills * Experience with electronics and basic electrical circuits * Thorough understanding of and ability to use appropriate tools * Excellent customer service and ability to work well with others * Knowledge of DDC Control Theory and Applications as related to HVAC equipment * Strong knowledge of common DDC communications protocols such as but not limited to BACnet, LON, Modbus, etc. Required Experience/Education * At least 3 years of experience with programming, startup and commissioning of control systems * Niagara N4 certification * Experience with multiple manufacturers of controls a plus * Technical knowledge with installation of controls equipment and ancillary devices Physical Requirements * Physically able to climb overhead or crawl under spaces to complete jobs. * Must be willing to work at heights. * Must be able to lift up to 35 pounds at times.

Job Description About the Role: The Ophthalmic Technician - Diagnostic Testing Supervisor plays a critical role in overseeing and performing advanced diagnostic testing within an ophthalmology clinical setting. This position ensures the accuracy and quality of diagnostic procedures such as visual field testing, optical coherence tomography (OCT), and other specialized ophthalmic imaging techniques. The supervisor is responsible for managing a team of technicians, providing training, and maintaining compliance with clinical protocols and safety standards. By coordinating diagnostic workflows and collaborating closely with ophthalmologists and other healthcare professionals, this role directly contributes to the timely and precise diagnosis and management of eye diseases. Ultimately, the position supports improved patient outcomes through leadership, technical expertise, and operational excellence in diagnostic testing services. Minimum Qualifications: • Certification as an Ophthalmic Assistant or Technician (COA, COT) or equivalent credential., • Minimum of 3 years of experience in ophthalmic diagnostic testing., • Minimum of 1 year experience in management., • Demonstrated experience in supervising or leading a clinical team., • Strong knowledge of ophthalmic diagnostic equipment and testing procedures., • Familiarity with healthcare compliance standards and patient safety protocols., • Experience working in a high-volume ophthalmology clinic or hospital setting., • Supervise and coordinate daily diagnostic testing operations, ensuring efficient workflow and high-quality patient care., • Perform advanced ophthalmic diagnostic tests including visual field analysis, OCT, fundus photography, and corneal topography., • Train, mentor, and evaluate ophthalmic technicians to maintain high standards of clinical competency and patient service., • Maintain and calibrate diagnostic equipment to ensure accuracy and reliability of test results., • Ensure compliance with healthcare regulations, safety protocols, and documentation standards., • Create and manage scheduling and resource allocation to optimize patient throughput and minimize wait times., • Participate in quality improvement initiatives and contribute to the development of clinical protocols., • Initial and continued training and coaching of Ophthalmic Technicians- Diagnostic testing. Expected hours: 40 per week Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee discount, • Health insurance, • Health savings account, • Paid time off, • Professional development assistance, • Referral program, • Uniform Allowance, • 8 hour shift, • Ophthalmology: 3 years (Required), • Ophthalmology Diagnostic Testing: 3 years (Required), • San Antonio, TX (Required) The required skills enable the supervisor to expertly perform and oversee complex diagnostic tests, ensuring precision and reliability in patient assessments. Leadership and communication skills are essential for effectively managing and developing the technician team, fostering a collaborative and efficient work environment. Technical proficiency with ophthalmic instruments and software allows for accurate data collection and troubleshooting of equipment issues. Organizational skills support the coordination of testing schedules and resource management to maintain smooth clinical operations. Preferred skills such as advanced certifications and EMR proficiency enhance the ability to implement best practices and integrate diagnostic data seamlessly into patient care workflows.

Job DescriptionBenefits: • Bonus based on performance, • Dental insurance, • Health insurance, • Competitive Compensation, • Career Advancement, • Training and Development, • Comprehensive Benefits Package, • Employee Discounts, • Positive Work Environment, • Locally-Owned, • Cutting-Edge Tools and Equipment: Every day is different in our busy automotive service center! You will be responsible for a variety of tasks, including overseeing service advisors, addressing customer inquiries, and managing required documentation. Responsibilities • Manage a team of automotive service professionals to ensure a high level of employee morale and customer satisfaction while maintaining profitability, • Ensure repairs and maintenance tasks are completed in a timely manner, • Mentor employees on best practices for improving sales and customer service techniques, • Oversee day-to-day operations of the service department, • Manage the flow of service department paperwork, including manuals, invoices, repair orders, and maintenance recordsQualifications, • High school diploma or GED required bachelors degree preferred, • Valid state-issued drivers license and clean driving record are required, • Successful completion of a pre-employment drug and background screening, • At least two years of experience as an automotive service writer or service advisor is required. Experience as an automotive service manager is preferred, • Deep understanding of automotive technology, automotive service technician job duties, and automotive repair services is requiredWhy Meineke?, • Meineke values personal and professional growth., • Benefit from ongoing training and development programs to enhance your automotive knowledge and stay up-to-date with the latest industry trends and advancements., • Join a team of driven and talented individuals who share your passion for high-quality repair work. Experience a supportive and collaborative work environment that encourages growth and camaraderie., • With locally-owned Meineke shops, experience a sense of community and connection with your customers and fellow team members.

Job DescriptionDescription: TITLE: Fleet Maintenance Supervisor DEPARTMENT: Fleet Maintenance REPORTS TO: Fleet and Facility Manager FLSA STATUS: Exempt Position Summary: The Fleet Maintenance Supervisor, under the direction of the Fleet and Facility Manager, plays a critical leadership role in ensuring the safety, reliability, and efficiency of Tiger Sanitation’s fleet operations. This position is responsible for overseeing day-to-day maintenance activities, auditing processes, enhancing technician performance, and utilizing data-driven tools to improve compliance, reduce downtime, and deliver an exceptional experience for Tiger employees and customers. Essential Functions: • Supervises and leads Fleet Maintenance personnel in alignment with Tiger Sanitation’s 4-Step Decision Making Process to promote safety, regulatory compliance, operational efficiency, and optimal vehicle uptime., • Performs weekly shop walkthroughs to ensure facility cleanliness, operational readiness, and mechanical integrity of shop equipment., • Conducts daily in-shop observations and work order audits, including DVIR and repair documentation, to ensure compliance with FMCSA and internal standards., • Provides ongoing coaching, evaluation, performance feedback and corrective action to technicians, reinforcing Tiger’s safety and quality expectations., • Partners with the Fleet and Facility Manager to address performance gaps and drive accountability among team members., • Utilizes Tech Tools, Fleetio, Samsara, and other diagnostic and documentation platforms to address maintenance tasks, track data, and improve decision-making., • Develops or enhances systems to record, track, and reduce deficiencies identified through PM inspections and work order audits., • Maintains strong cross-departmental communication to report progress on repair timelines, safety performance, and compliance objectives., • Ensures that all maintenance activities are performed in accordance with OSHA, DOT, FMCSA, and all applicable local, state, and federal regulations., • Promotes and enforces a safety-first culture across all aspects of fleet maintenance operations., • Performs other duties as assigned.Requirements: Knowledge/Skills/Abilities • Strong leadership and supervisory skills with experience managing and coaching multiple technicians in shop or field environments., • Ability to teach, model, and enforce safe operating procedures for vehicles, equipment, and shop protocols., • Proficient in maintenance-related software systems, including Samsara, Fleetio, Tech Tools, and other diagnostic and compliance platforms., • Ability to positively influence behavior and promote a culture of accountability and high performance through coaching or corrective action., • Demonstrates Tiger Sanitation’s Core Values: Professionalism, Respect, Accountability, and Communication in all interactions., • Excellent organizational and prioritization skills to meet team goals and service expectations., • Effective decision-making aligned with Tiger’s 4-Step Decision Making Process., • Strong collaboration and communication skills across departments and teams. Education and Experience • High school diploma or equivalent required; additional technical or vocational training preferred., • Minimum of 3 years of experience in fleet maintenance, including supervisory responsibilities., • Valid Class C Driver’s License required. Working Conditions • Work is primarily conducted in outdoor or shop environments, with exposure to various weather conditions and mechanical elements.

Job Description At PEARCE, we've got a career for you! Join the nation's leading independent service provider for critical telecommunication and renewable energy infrastructure. We are the premier independent service provider for our nation's critical infrastructure. With over 2,500 team members nationwide, Pearce delivers comprehensive engineering, maintenance, repair, and repowering solutions, ensuring the seamless operation of our nation's wireless and wireline telecom, commercial and utility-scale solar and wind projects, EV charging stations, as well as large-scale power generation, critical power and energy storage assets. Your Impact: The Telecom Customer Premise Technician - Level IV is required to perform detailed installation, integration, and testing of Customer Premise fiber systems and routers with minimum supervision. Core Responsibilities: • Must have mastered installation skills and testing per Telco Standards and be able to perform all the duties of the Level IV requirements with a high degree of competence and accuracy., • Mastered comprehensive equipment installation skills on a wide variety of fiber system installations and performed system testing and integration., • Knowledge and experience with transport equipment including Ciena, Fujitsu, Cisco, Nortel, Nokia, DELL, Juniper, etc., • Deep understanding of fiber installation standards and procedures., • Ability to read and follow Method of Procedures, order specifications, floor plans, equipment, and wiring documentation., • Responsible for the accuracy of all documentation as required., • Ability to interface with customers, vendors, and other company employees in the completion of, testing of, and turning up of equipment. Turn up and Integration system testing skills required., • Elevated level of understanding of all company policies and practices, safety procedures, paperwork, and administrative requirements. Will review subordinate's time and expense documentation for accuracy and completeness., • Comply with system update requirements of all company/customer installation documents., • Ability to resolve any project related issues utilizing defined processes., • Read, understand, and apply job/equipment specifications, installation documents, schematics, and test records. Demonstrated proficiency in generating MOP's, High-risk activity reports, work schedules, test records, and project completion reports., • Physically place, remove, or modify working and non-working equipment., • Install Cable trays and/or racking from drawings and Engineering documents., • Install Telecommunications equipment cabinets and frames, data servers, switches, routers, repeaters, bridges, gateways, multiplexers, transceivers, firewalls as required., • Identify, label, measure, terminate and physically route the cables that supply AC and/or DC power or transmit data in various technical spaces., • Conduct testing and document performance characteristics of hardware and software; determine efficiency, reliability, and compatibility with existing system., • Perform test and turn-up as well as other integration activities., • Resolve equipment and technical issues as they arise., • Perform quality validation on in-process and completed work. Core Experience: • Minimum 5+years' installation experience or combination of experience and training as determined by company management. Prior leadership experiences required. Verizon Installation experience a plus!, • High school diploma with two years technical school or a combination of training and experience related to telecommunications field installations., • Ability to apply common sense understanding to conduct instructions furnished in written, oral, or diagram form. Ability to deal with problems involving variables in standardized situations., • Must have proficient laptop computer skills and experience with applications., • Ability to fully understand all company/customer policies and procedures and safety requirements., • Excellent verbal and written communication skills., • MS Office (Outlook, Word, Excel, Teams) skills. At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. • Travel required in your home region utilizing a company vehicle. Must be able to work a variety of shifts and travel with overnight stays, if required. Expenses are 100% paid by the employer. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$62,000—$72,000 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. At PEARCE, we are an equal opportunity employer dedicated to cultivating an inclusive environment that empowers employees to excel and make a meaningful impact, providing a dynamic space for field technicians, service specialists, and corporate professionals to flourish and propel their careers forward within our nationwide presence and expansive service offerings. Learn more about us at !

Job Description Warranty Hub Regional Manager (San Antonio, Texas) The Musco Services Team has an opening for a Warranty Hub Regional Manager in the San Antonio, Texas area. If your experience aligns with the qualifications outlined below, we look forward to hearing from you! Hear why we are #TeamMusco Essential Criteria: • Post-high school education (trade school, associates, or bachelor’s degree) in business or customer service-related field or equivalent experience preferred, • 5-7 years of leadership/supervisory experience is preferred, • Work knowledge and experience in a customer services business, • Excellent verbal, written, and telephone communication skills, • Excellent technical and problem-solving abilities, • Work well in a fast-paced, ever-changing environment, • Mechanical aptitude or knowledge, • Ability to coordinate schedules and perform managerial duties, • Strong personal initiative and ability to work with little supervision, • Strong organizational skills, • Computer skills in Word, Excel, and internal computer systems, • Responsible for the management, operations of a services hub executing on service orders that take place within a defined geography, roughly a 200-mile radius of the hub’s office location., • Assist in development of hub processes with the support from Musco’s Corporate Services Team. Operational and budget responsibilities of the regional warranty hub to ensure company goals are met in quality and quantity of warranty claims, completion timeframes, product inventory and overall operations, • Coordinate, communicate, and confirm schedules for warranty requests including project details, technician schedules, customer schedules, vendor management, and rental of necessary equipment to complete projects in a timely manner providing high levels of customer service, • Key focuses on service quality, safety and the customer/Musco warranty experience, as well as meeting needs of Musco’s internal process requirements (RMA) and hub product inventory, • Oversee the daily service operations within the assigned geography, people leadership, coaching, expense management, inventory control, safety and appearance., • Direct management of the regional technician team (3 – 6 direct reports). Team development, salary recommendations, approving PTO and maintaining consistent communication with technicians regarding daily work duties, schedules and performance to ensure key indicators and goals are achieved, • Make solid financial decisions related to project costs (rental equipment, tech purchases, logistics decisions), as well as working with vendors to set up pricing standards, • Travel to a job site is anticipated to occur monthly and as needed to work with each direct report and at times cover their technician duties due to PTO, and gain knowledge into their team members’ everyday roles and responsibilities, • Travel to Musco Corporate office for departmental meetings and training as needed. Musco, a privately held company since 1976, is the global leader in sports and large-area lighting solutions, with projects in 135 countries. Headquartered in Oskaloosa, Iowa, Musco employs more than 1,800 team members worldwide. Team Culture and Partnerships: At Musco, we offer meaningful work in a team-first culture with continuous learning and professional development. We value work-life balance, providing flexibility for community involvement, family activities, and personal time. As supporters of recreational organizations, we help ensure safer and more enjoyable playing experiences worldwide. If giving back resonates with you, learn more about our partnerships. At Musco, we make it happen and want you to be a part of it. Stay connected with us! LinkedIn | Facebook | Instagram | YouTube

Job Description Job Title: Laboratory Technician About Company: Who is ERG? ERG is a leading U.S. based, privately held, independent clinical research site company, and provider of clinical development services with an expertise in early and late-stage neuroscience drug development. With 19 wholly owned clinical sites and 5 affiliated sites, we conduct in-patient and out-patient phase I-IV clinical research studies. ERG has 340+ in-patient beds, a large and growing database of patients suffering from mental illness, neurological disorders, sleep disorders, addictions, Acute and Chronic Pain, diabetes and other illnesses as well as normal healthy volunteers who participate in trials for the advancement of medicine. With access to over 32 million patients/subjects and 5000 + completed trials, ERG continues to grow its capabilities and expand into indications where there are tremendous unmet medical needs in the United States and globally. Job Description: The Laboratory Technician is responsible for assisting with document management, protocol related clinical assessments of research subjects, laboratory functions, and assisting in tasks of the Clinical Research Coordinators as it relates to the conduct of clinical trials. Completes all duties under the direction of the Site Director or designee. Maintains accurate, confidential files and documentation of study participants. In executing these position responsibilities, the Clinical Intake Assistant is guided by Good Clinical Practices (GCP), International Conference on Harmonization (ICH) guidelines, Health Insurance Portability and Accountability Act (HIPAA) and company standard operating procedures and policies. PRN-hours will vary, need to be flexible Responsibilities: • Maintain tenants of good customer service when interacting with subjects, staff, and representatives of sponsors or CROs., • Clinical skills include phlebotomy, vital sign measurements, and performing ECGs., • Collect demographic, medical, and medication history., • Complete safety assessments, • Work closely and collaboratively with Director of Clinical Operations, Clinical Research Coordinators, Sub-Investigator, and Principal Investigator., • Enter data as appropriate for multiple Electronic Data Capture platforms as well as respond and resolve queries that may arise., • Meet defined goals established in conjunction with site leadership., • Study, learn, and comply with ERG site standard operating procedures, and other policies, practices, and regulations where applicable., • Education and experience, • High School Diploma or equivalent, • Experience in a medical setting/ training and certification as a Medical Assistant/CNA, • Requirements, • Understands regulatory requirements, as well as Good Clinical Practices (GCP) and International Conference of Harmonization (ICH) guidelines., • Able to initiate or modify behavior to achieve desired outcomes in spite of environmental factors, priorities, or problems that might not be well defined or that are subject to change., • Good organizational and interpersonal skills, • Attention to detail., • Knowledgeable in medical terminology, • Excellent communication skills (interpersonal, written, verbal), • Basic computer skills to include Word, Excel, as well as proprietary applications unique to the clinical research industry (such as Study Manager)

Job Description • JOB SUMMARY, • The Service Workflow Coordinator in the service department of a dealership will monitor, manage, and optimize the flow of work (service orders, technician assignments, parts requisitions, vehicle scheduling) so that the service bay runs efficiently, customers are served promptly, and repair orders are completed profitably and with high quality., • ESSENTIAL DUTIES, • Review incoming service work (appointments, walk‑ins, warranty/recall jobs) and allocate them to the appropriate technician/crew., • Perform other duties as assigned., • Establish the necessary measure to safeguard the assets and interests of the company., • Provide a quality service for the internal and external customers., • Perform their duties with a sense of mutual respect, ethical, collaboration, tolerance and positive attitude toward their peers., • Protects organization's value by keeping information confidential., • RESPONSIBILITIES, • Review incoming service work (appointments, walk‑ins, warranty/recall jobs) and allocate them to the appropriate technician/crew., • Monitor work‑in‑process: track vehicle status, parts status, technician progress, delays, bottlenecks, and proactively act to resolve them., • Coordinate with parts department to ensure required parts are available or ordered in time., • Liaise with service advisors, technicians, service manager, and possibly warranty/admin staff to ensure seamless communication and workflow., • Maintain the service bay schedule: assign bays, technicians, clean up assignments, ensure technicians are working on priority jobs, expedite high priority jobs (e.g., fleet, warranty, recalls)., • Track key performance indicators (KPIs) such as technician hours vs available hours, repair order hours, estimated vs actual time, billable percentage, first‑time fix right, customer satisfaction (CSI) for service, on‑time delivery, backlog of work, parts fill rate, etc., • Generate daily/weekly reports for service manager: job counts, hours sold, hours billed, productivity, efficiency, backlog. Use data to highlight trends and propose improvements., • Implement process improvements to reduce waste, improve turnaround time (TAT), improve customer satisfaction, reduce rework., • Ensure compliance with manufacturer warranty policies, safety standards in the service department, and dealership policies., • Possibly assist in training/mentoring less‑experienced technicians or service lane staff on workflow best‑practices, shop flow, and department policies., • May fill in for or assist the Service Manager or Shop Foreman in planning staffing, technician scheduling, and managing technician workload. EXPERIENCE, KNOWLEDGE AND SKILLS • Must have a clean and valid driver's license, • High school diploma or equivalent required; associate’s or bachelor’s in business, operations, automotive technology or similar preferred., • Previous experience in an automotive service department (dealership or repair facility), ideally with exposure to technician workflow, service scheduling, parts management, or operations., • Strong organizational and problem‑solving skills; ability to multitask and prioritize under pressure., • Excellent communication skills—able to interact with service advisors, technicians, parts personnel, customers., • Proficiency in dealership service management software (DMS), shop management tools, and Microsoft Office (especially Excel) for reporting., • Familiarity with automotive repair terminology, shop operations, technician workflow is a plus., • Ability to make decisions, escalate issues when needed, and work collaboratively across departments., • Ability to analyze metrics, identify bottlenecks, recommend and implement improvements.

Job DescriptionCompany Description Eurofins Scientific is a network of independent companies providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work to ensure the products they supply are safe, their ingredients are authentic, and labelling is accurate. Eurofins is dedicated to delivering testing services that contribute to the health and safety of society and the planet, and to its corporate responsibility to protect the environment and ensure diversity, equity, and inclusion across the entire network of Eurofins companies. With over 50 laboratories and more than 40 service centers nationwide, Eurofins Environment Testing provides full-service environmental analysis across all 50 states. Our network supports public and private clients—including DoD, DOE, and municipalities—through robust logistics and continuous investment in people, technology, and infrastructure. We offer comprehensive testing for air, water, soil, sediment, tissue, and waste, covering a wide range of analytes including PFAS, metals, VOCs/SVOCs, dioxins/furans, radiochemicals, and more. Job Description Logs and tracks the receipt and shipment of all samples and verifies receipt of samples. Assists in preparing bottle kits for delivery to clients and ensures accurate and timely documentation of sample log in, labeling, and routing. Determines the priority level and appropriate testing procedures of samples according to Chain of Custody as well as labels and stores samples in accordance with documented procedures. Additionally, the Sample Control Technician I may be responsible for pick-up and delivery of samples as well as additional customer service, driving, or courier duties as necessary to support laboratory and client needs. Sample Control Technicians will also be responsible for proper disposal of samples and waste in accordance with all applicable procedures. Essential Duties and Responsibilities: • Receives and unloads incoming samples or consignments in accordance with DOT regulations and verifies receipt against Chain of Custody (COC), matches it to the corresponding quote and notes discrepancies daily. Verifies that COC’s are accurate, complete, and correct and seeks resolution for those that are not., • Logs samples into Lab Management System daily to assign a lot number for tracking purposes and distributes paperwork to Project Managers., • Labels samples so they may be identified by the lot number assigns and delivers samples to appropriate labs for analysis daily., • Prepares bottle kits daily to be shipped to clients to collect samples and return for analysis in accordance with established procedures including EPA and DOT requirements., • Forwards samples to other laboratories in accordance with DOT regulations as needed to run tests that are not performed at that location., • Disposes of spent samples, waste and other potentially hazardous materials in accordance with established procedures., • Monitors freezer and cooler temperatures daily to confirm that the readings are within SOP guidelines., • Cleans and organizes the department daily to promote a clean, safe work environment and smoother flow of daily operations., • Maintains and promotes safety and conducts all operations in a safe and environmentally compliant manner., • Stocks and supplies inventory daily and assists with inventory of supplies to maintain proper quantity of materials to perform tasks appropriately., • Performs splits and composites as needed upon request., • May perform courier duties as necessitated to support lab and client needs., • Will be compliant with all driver procedures, certification, and Company driver policies., • Must be willing to be on-call during non-business hours in order to perform non-routine sampling and delivery., • Assists in maintenance of walk-in coolers to facilitate locating samples., • Ships empty coolers back to clients and other Eurofins Environment Testing Laboratories. Logs all outgoing coolers in order to maintain a detailed inventory of all coolers., • Maintains all company vehicles for sample pickups and deliveries as needed., • Conducts all client interaction in an appropriate and professional manner., • Other job duties as determined by local management. Qualifications, • High school diploma or equivalent, • TALS experience is preferred., • Licensure/Certificate/Registration:, • Department of Transportation (DOT) Certificate may be required for shipping hazardous chemicals within 90 days of date of hire., • Valid state issued driver's license to operate company vehicles, • Ability to pass a Motor Vehicle background check as required for company driver certification., • Transportation Worker Identification Credential (TWIC) card as well as TSA clearance may be required within 90 days of date of hire., • Additional client or location licenses or certifications may be required in order to support client and operational needs., • May drive for long periods, up to 8 hours per day., • Professional working proficiency in English is a requirement, including the ability to read, write and speak in English, • Authorization to work in the United States indefinitely without restriction or sponsorship Additional Information Position is full-time, Monday to Friday 8 am to 5 pm with possible overtime & weekends. Compensation: $21 / hour. Candidate within a commutable distance to San Antonio, TX are encouraged to apply. Eurofins Environment Testing (USA) provides a compensation range for informational purposes, the actual base salary may vary based upon, but not limited to, relevant experience and skill set, base salary of internal peers, business sector, and geographic location. As a Eurofins employee, you will become part of a company that has received national recognition as a great place to work. We offer excellent full-time benefits including comprehensive medical coverage, life and disability insurance, 401(k) with company match, paid holidays, paid time off, and dental and vision options. To learn more about Eurofins, please explore our website We support your development! Do you feel you don’t match 100% of the requirements? Don’t hesitate to apply anyway! Eurofins companies are committed to supporting your career development. We embrace diversity! Eurofins network of companies believe in strength and innovation through diversity, being an Equal Opportunity Employer. We prohibit discrimination against employees or applications based on gender identity and/or expression, race, nationality, age, religion, sexual orientation, disability, and everything else that makes employees of Eurofins companies unique. Sustainability matters to us! We are well on our way to achieving our objective of carbon neutrality by 2025, through a combination of emission reduction and compensation initiatives. We encourage our laboratory leaders to make sustainable changes at their local level, and in addition to their initiatives we also count on our dedicated carbon reduction team to help us to achieve this goal! Find out more in our career page: Eurofins USA Environment Testing is a Disabled and Veteran Equal Employment Opportunity employer.

Job DescriptionWhat’s in it for you?! Grow fast in a high-demand safety & tech firm! Lead projects in fire, security, and access control! Work with sharp teams in a fast-moving field! Real responsibility, real training, real advancement! Strong pay, bonus potential, and long-term upside! Full benefits, PTO, and supportive leadership! Summary: The Fire Alarm Technician installs, programs, maintains, and repairs fire alarm and security alarm systems for commercial clients. This role requires strong low-voltage electrical skills, the ability to read technical diagrams, and proven troubleshooting capabilities. The technician will conduct site surveys, perform system upgrades, document all work, and ensure that all life-safety systems meet required operational and code standards. This position is ideal for a detail-oriented technician who enjoys fieldwork, problem-solving, and delivering high-quality customer service.What You’ll Do: Install, program, and test fire alarm systems for commercial buildings. Conduct site surveys to identify optimal equipment placement and system design needs. Troubleshoot, diagnose, and repair alarms, panels, detectors, and low-voltage system components. Upgrade outdated systems and replace faulty detection or control units. Perform routine inspections, maintenance, and system functionality checks. Train customers on system operation, features, and safety protocols. Maintain accurate documentation of installations, service work, and maintenance activities. Collaborate with team members and project managers to meet deadlines. Stay current with evolving fire alarm technology, brands, licensing requirements, and industry codes. Perform additional assigned duties in support of safe and effective operations. Experience You’ll Need: High school diploma or equivalent required. Multi-year experience as a Fire Alarm Technician or related low-voltage technician preferred. Working knowledge of fire alarm systems, CCTV, access control, and security systems preferred. Ability to program fire alarm panels and operate software via laptop, tablet, or mobile device. Proficiency reading blueprints, wiring diagrams, and technical schematics. Strong troubleshooting skills in low-voltage electrical systems.

Job DescriptionCompany Description At Konecranes, we believe that great customer experience is built on the people behind the Konecranes name. Everything we do, we do with passion and drive. We believe diversity drives business success and is the foundation for our growth. We welcome different backgrounds and skills that enrich our community, and we promote a place where we can ALL be ourselves. This is what makes Konecranes a unique place to work. Job Description JOB POSITION: Industrial Technician Are you interested in becoming an experienced Overhead Crane Service Technician? Join Konecranes, one of the world’s largest material handling companies. We're seeking skilled individuals with electrical and mechanical expertise, comfortable working at extreme heights. Our service technicians, the heart of our industry, thrive in a safety-first environment. You'll troubleshoot 480 3-phase motors, address crane issues, and collaborate with clients and facility directors to meet service needs across the United States. Principal Responsibilities: • Conduct inspections, maintenance, and repairs on electric overhead traveling cranes and hoists at customer locations., • Provide on-call service as part of a rotation, including after-hours support., • Troubleshoot electrical, mechanical, structural, and electronic issues on-site., • Perform post-repair audits to ensure safety features are functional., • Document findings and recommend corrective actions, including safety notifications to customers., • Consult with customers on repair and safety issues, offering recommendations for material handling improvement., • Produce electronic documentation using company tools, obtaining customer signatures., • Stay updated on industry codes and regulations (OSHA, ANSI, CMAA, HMI)., • Complete service reports and other required documents accurately and promptly., • Communicate with the Field Operations Manager and Service Coordinator following established practices, • Maintain company-issued equipment, vehicles, and assets in proper working order., • Operate tools, equipment, and vehicles, reporting deficiencies to the supervisor., • Follow established safety rules and procedures, including customer guidelines., • Participate in monthly safety meetings., • Perform other responsibilities as assigned by the supervisor. Qualifications Education: High School Diploma required. Associate degree in Industrial Electrical and/or Mechanical Technology or related field preferred or equivalent vocational/technical training and experience. Experience: Minimum one (1) year experience involving electrical troubleshooting and mechanical repair. Some electronic experience but not necessary. Prior experience with cranes is a benefit, but not required. Other Requirements: Must have and maintain a good driving record, including a valid driver's license. Must be willing to work off the ground. Can work varied overtime, as needed by customer, be available for "on call" as part of the service office rotation and be able to travel and work out of town, on occasion. Must be able to frequently lift to 25 lbs. Must be able to lift up to 50 lbs. on a daily basis. Must be able to lift to 75 lbs. although not on a daily basis. Must be able to lift 100 lbs. on a rare basis. This position requires frequent climbing, balancing, stooping/crouching, and overhead reaching. This position requires occasional pushing, pulling, kneeling, and crawling. This position will be inside approximately 90% of the time and outside approximately 10% of the time. This position will be frequently exposed to heat, cold, noise and heights. • This is a safety sensitive position., • *KCN Additional Information What we offer: Salary: $22 - $48 an hour - Pay is determined based on skills, geographic location, internal equity, market/data analysis, number of years of prior relevant experience, degrees and/or certifications, technical assessment score, etc. Company Vehicle: Our Service Technicians get a work truck and a gas card to be used for business purposes. Candidates must pass a Motor Vehicle Record (MVR) check. Benefits: Medical Plan, Dental, Vision, 401k plan with a match from day one, identity theft protection, accident insurance, travel insurance and so much more! Vacation: 2 weeks of vacation per year (pro-rated for the first year depending on start date). 5-12 years of service, 3 weeks. 13+ years of service, 4 weeks. Sick Leave: 5 days of Sick Leave per year. Pro-rated the first year after 90 days of service Konecranes moves what matters. Konecranes is a global leader in material handling solutions, serving a broad range of customers across multiple industries. We consistently set the industry benchmark, from everyday improvements to the breakthroughs at moments that matter most, because we know we can always find a safer, more productive and sustainable way. That's why, with 16 000+ professionals in over 50 countries, we are trusted every day to lift, handle and move what the world needs. Konecranes is committed to ensuring that all employees and job applicants are treated fairly in an environment which is free from any form of discrimination. We are an Equal Opportunity Employer - Minorities/Women/Protected Veterans/Disabled/Other Protected Category. Konecranes, Inc. and its affiliates will not accept resumes from external recruiters or agencies without a Service Agreement and Agency Portal submission. Any resumes sent without a Service Agreement and Agency Portal submission with Konecranes, Inc. are void of any fees and free for internal use. Applicable Konecranes data protection obligations are the responsibility of the agency.

Job Description Are you looking for an opportunity to work with the world’s leading aviation maintenance and engineering specialist company? We are currently recruiting for an Aviation Structure Sheet Metal Mechanic job in San Antonio, TX. As an Aviation Structure Sheet Metal Mechanic, you’ll have the opportunity to perform maintenance services and modifications for many major airlines and cargo aircraft assisting a team of highly experienced aviation technicians to return aircraft to service safely. Aircraft you'll be working on E190, A300, Boeing 787, Boeing 757 – 3 lines, Boeing 747, MD11 – 2 lines, DC10 Position Overview: Immediate positions are available for experienced Aviation Structure Sheet Metal Mechanic in San Antonio, TX. We are in need of heavy structure mechanics to work on C-checks & D-checks. Aircrafts we are working on: E190, A300, Boeing 787, Boeing 757 – 3 lines, Boeing 747, MD11 – 2 lines, DC10 -Job Type: Contractor -Hire Date: Immediate -Compensation: $25-$29/ hour (based on experience) -Per diem: we offer the highest non-taxable per diem in the market (including on overtime) -Hours: overtime is available -Tools: toolbox and tools required Position Responsibilities: • Able to perform close tolerance drilling, reaming, removal, and installation to critical support structures, • Utilizing tools as required to shape and form angles and configurations according to blueprint specifications., • Perform any and all required pickup, rework & fabrication, • Perform C-checks & D-checks Follow all policies and procedures, • Keep a clean & orderly work environment -Education: • Aircraft Sheetmetal (2 years required)

Job DescriptionDescription: Data Center Operations (DCO) Technicians troubleshoot and solve a range of data center infrastructure issues including, but not limited to: hardware, fiber, networking, and related problems. This position requires that the candidate selected be a US Citizen and must currently possess and maintain an active TS/SCI security clearance with polygraph Key job responsibilities DCO Technicians will be required to engage in physical data center activities. This includes all tasks associated with planning and tracking capacity, rack deployment, rack cabling, hardware and software troubleshooting, and rack decommissioning. These Activities Include The Following • Lifting and moving material up to 49 pounds each, • Working in cramped and/or elevated locations, • Bending, lifting, stretching, and reaching, • Standing and walking for up to 8+ hours a day, • Ascending and descending ladders, stairs, and gangways safely and without limitation, • Work in a noisy environment, • Work shifts longer than 8 hours to support 24/7 operations (covering both night and day shifts).A day in the li, • Taking ownership of technical issues and engaging other teams when needed to drive resolution, • Show a strong aptitude for troubleshooting and problem solving, • Solve problems at their root and step back to understand the broader context, • Maintain service level agreements through the implementation of proactive issue detection and reporting, • Are biased to act in the absence of direction or support, • Improve effectiveness through process innovation, • Current, active US Government Security Clearance of TS/SCI with Polygraph, • Associate's degree in IT-related field or equivalent professional or military experience, • 2+ years of experience with server hardware, • 1+ years of experience with UNIX/Linux operating systems, • Bachelor's degree in an IT-related field or equivalent professional or military experience, • Hands-on experience with one or more of the following hardware platforms (e.g. Dell, HP) is a plus., • Networking experience with CCNA and/or Network+ certifications is a plus., • Previous experience working in a Data Center environment (racking & stacking gear, cable management, hot & cold aisle containment).

Job DescriptionEControls is a global provider of innovative, state-of-the-art integrated controls solutions for internal combustion engines and electric drive systems in the off-highway, on-highway, and stationary equipment markets. EControls designs world-class, full-authority engine management systems for major OEMs around the world. Our global engine development labs and engineering staff offer full-range support, from design guidance for base engine conversion to hardware, software, and engine calibration to meet each application's specific requirements. We are passionate about customer satisfaction and service. We fearlessly engage in any effort that will eliminate our customers’ risk and clear a path to their success. We immerse ourselves in our customers’ world, reveal unknowns and deliver integrated solutions. EControls is looking for an experienced Manufacturing Engineering Technician to join our growing team. Responsibilities Provide support regarding Manufacturing best practices to achieve critical success factors Provide real time technical support and troubleshooting for production and test equipment Participate in preventative maintenance activities Support manufacturing operations to achieve overdrive goals Provide support for new product development Support error free processing in manufacturing Provide solutions to technical issues Initiate corrections to work instructions & procedures Improve existing fixtures and tooling Support repairs of warranty return units Establish solutions to safety near misses Learn how our products work and how they are used Learn new skills and get educated on new technologies Requirements • Associates degree in engineering or technical field., • Excellent ability to troubleshoot root cause technical issues. wKfVVxolb1

Job Description The Maintenance Supervisor Manages, plans, schedules and executes work orders and preventive maintenance programs for the Village. Completes work orders and other maintenance tasks when necessary. Facility may include all or some of the following components: offices, resident rooms, laundry facilities, swimming pool, study lounges, parking areas, gym and/or an activity center/community room/clubhouse. Maintenance Activities • Performs and/or supervises the daily tasks necessary to maintain the curb appeal and physical integrity of the facility., • Provides daily maintenance service to resident’s units as requested by resident via a work order system., • Coordinates with Leasing Director and General Manager to stay current on move-out and move-in schedule in order to perform maintenance on vacated make-ready vacant units., • Develops and implement a preventive maintenance program., • Coordinates and supervises all work performed by outside contractors., • Develops and maintains rapport with outside vendors, suppliers and contractors., • Solicits and reviews outside bids for services., • Performs all other duties as assigned., • Oversees and maintains Key Control Policies and Procedures Administrative Activities • Purchases and maintains the inventory needed on-site to perform daily maintenance duties., • Develops annual maintenance plan to align with the repair and maintenance needs of the Village., • Assists with the development of the Cap Ex plans., • Maintains a monthly maintenance budget., • Prepares for annual turn., • Compiles a variety of reports relating to the maintenance operations of the property., • Participates when necessary in an on-call rotational duty for evening/weekend hour emergency response., • Responds to emergency maintenance calls., • Maintains accurate records for furniture, keys and fixture inventories., • Inventories all tools and equipment used in maintenance activities and ensure tools and equipment are maintained in good and safe working condition., • Supervises and coordinate work shifts for Maintenance Technician(s) and Housekeeping Supervisor, as applicable with assistance of Village GM., • Evaluates the performance of the Maintenance Technician(s) and Housekeeping Supervisor, as applicable., • Assists in the hiring and training of the necessary personnel for the Maintenance and Housekeeping Departments, including OSHA training and all relevant reporting. Experience • Minimum of five (5) years’ experience in all aspects of maintaining a large scale multi-family apartment complex containing a pool, laundry, office/community room and/or fitness center., • Minimum of three (3) years supervisory experience., • Experience in common maintenance items such as drywall repair, swimming pool maintenance and phone systems. Qualifications • High school diploma or equivalent., • HVAC and CPO Certifications required., • Completion of workshops in the areas of air conditioning repair, plumbing, electrical and heating systems preferred.

Job DescriptionBenefits: • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off A growing company in the disaster restoration services is hiring a qualified Water Mitigation Technician. Dwyer Restoration is looking to promote and build the division in Water Mitigation. The right response team can mean the difference between recovery and a total loss. We are looking for a team member that is committed to providing quality service, walk customers through the process in restoring their home and representing our brand with integrity and dedication. Primary Duties and Responsibilities • Effectively perform all water damage mitigation services the company offers, • Visit new assignments/jobs, interface with customer, • Ability to scope, document, contract, execute, and collect water/fire/smoke mitigation, • Ability to perform physical functions required for mitigation setup and demolition, • Focus and dedication to provide excellent customer service, • Complete appropriate documentation for each loss, • IICRC certified WTR-ASD, • Ability to pass a driving, background check and drug screening, • Evaluate the integrity of affected materials and contents, • Ability to work with time constraints to meet specific deadlines, • Additional duties as needed, • Maintain appearance and stock of appropriate tools, materials, and supplies for company vehicle, • Maintain inventory of related supplies, • Determine the sequence of steps to be taken when delivering the company's services, • Maintain timely and effective communication and flow of information with Technicians, Supervisors or Managers, • Excellent oral and written communication.Qualifications-Knowledge, • No less than 3 years experience in water mitigation, • Ability to apply techniques to determine appropriate equipment type and number of units, • IICRC certified WTR-ASDBenefits, • Health Insurance available after 90 days employment, • Paid vacation 1 - 3 weeks based on tenure, • Will provide a labor tech as needed, • Will provide phone, computer, van, equipment and tools as neededJob Type: Full-time Salary: $22.00 - $30.00 per hour - Depending on Experience Benefits: • Dental insurance, • Health insurance, • Paid time offSchedule:, • 8 hour shift, • Monday to Friday, • On call, • Weekend availabilitySupplemental pay types:, • Bonus payAbility to commute/relocate:, • Converse, TX 78109: Reliably commute or planning to relocate before starting work (Required)Experience:, • Water damage restoration: 3 years (Required)License/Certification:, • Hazardous Waste Operations & Emergency Response Training (Preferred), • IICRC Certification (Required)Willingness to travel:, • As requiredWork Location: In person Edit job Open View public job page

Job Description Overview Join our PharMerica team! PharMerica is a closed-door pharmacy where you can focus on fulfilling the pharmaceutical needs of our long-term care and senior living clients. We offer a non-retail pharmacy environment. Our organization is in high growth mode, which means advancement opportunities for individuals who are looking for career progression! Schedule: Mon-Fri 12:30pm-9pm Rotating weekends 8am-5pm This is not a remote position We offer: DailyPay Flexible schedules Competitive pay Shift differential Health, dental, vision and life insurance benefits Company paid STD and LTD Employee Discount Program 401k Paid-time off Tuition reimbursement Non-retail/Closed-door environment Our Pharmacy group focuses on providing exceptional customer service and meeting the pharmacy needs for hospitals, rehabilitation hospitals, long-term acute care hospitals, and other specialized care centers nationwide. If your passion is service excellence and top-quality care come join our team and apply today! Responsibilities • Order Entry for new/refill medications., • File documentation as required by pharmacy regulations., • Respond to customer inquiries as necessary., • Fill drug kits under direct supervision applying accuracy and aseptic technique., • Match preprinted label and delivery manifests with a source document., • Locate medication from pharmacy supply area, count out, and package in correct system, including blister packs and vials., • Pre-package medications according to standard procedures., • Assist in other phases of computer operations including billing procedures., • Clean all equipment and work areas., • Check equipment for calibration and safety., • Rotate stock as required. Qualifications • High school diploma or equivalent., • Registered Pharmacy Technician, preferred., • Previous pharmacy experience required., • Excellent data entry skills., • Attention to detail and be able to work under deadlines., • Excellent oral and written communication skills., • Excellent customer service skills.

Job DescriptionDescription: TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK’s ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a Field Supervisor to join our installation/fulfillment team in San Antonio, TX. In this role you will oversee the daily installation/fulfillment operations, ensuring all tasks assigned are completed in a timely manner and meeting organizational quality standards. Why TAK? • Full Time, • Paid Weekly, • Compensation: $60K - $70K annually, DOE, • Full Benefits Package (Medical, Dental & Vision), • Paid Time Off, • 401(k) with Company Match!, • 25K Company Paid Life Insurance, • Independent Work & Team Collaboration, • Oversee the daily installation/fulfillment operations of assigned market, • Verify that all technicians are logged in, have their routes, and are ready to begin work - confirm first-call readiness and ensure every tech is in position to start on time, • Distribute daily work or redistribute work if technician calls out; cover the route if cannot be reassigned, • Participate in the onboarding of new contractor crews, • Monitor technician progress throughout the day using workforce management tools, • Perform in-person quality checks (QC) on completed work and provide coaching, • Respond to client calls or escalations as they come in, • Support technicians by phone or directly on-site when they run into troubleshooting issues, • Help mentor and develop technicians while on-site or during ride-along, • Participate in daily KPI/verification calls with client and internal leadership, • Communicate with client leadership, internal workforce teams, and field technicians throughout the day to keep everyone aligned on workload, reroutes, escalations, and needs, • Validate any jobs marked “not done” by contacting customers and confirming accuracy so work is not incorrectly reported, • Support the warehouse teams with tracking and collecting of all required client equipment from assigned market, • Be present for CPE deliveries and help stock and scan equipment as well as assign CPE to technicians and ensure proper tracking and documentation, • Ensure all tasks assigned to your market are completed in a timely manner and meet organizational quality standards, • Be the market “expert” and “go to” resource spending 80%+ time in the field, • Review 10%+ market completed work monthly and provide feedback, • Ensure that resources (i.e. company, and client equipment, meters, PDA’s, etc.) are secured and maintained in proper working order, • Travel to project sites +/- 50% annually with some overnight stays, • Ensure contracted crews adhere to safety standards, and all federal, state and local laws, • Exceed client and company performance metrics for assigned market, • Work in a variety of environments; indoors, outdoors, tight spaces and elevationsRequirements:, • 3+ years of cable, broadband or telecommunications experience required, • Prior leadership experience a plus, • Ability to travel daily +/- 50% annually, open to a variety of schedules and accessible as the point of escalation, • Excellent customer service, time management, problem-solving and troubleshooting skills, • Ability to build and maintain positive relationships with internal and external customers, • Ability to give feedback; positive and negative when needed, • Strong desire to grow and develop team members, • Ability to complete work indoors, outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time, • Ability to safely navigate various terrains, managing equipment and tools, • Must provide a valid government-issued photo ID for verification; a driver’s license is required if the role involves driving, • Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting

Job Description SierTeK proudly serves our clients by providing expertise in the Program Management, Information Technology, and Administrative Support domains. Founded in 2007 as a minority and service-disabled veteran-owned company, we serve as prime- and subcontractor for a multitude of Federal Department of Defense contracts. By focusing on continual improvement, our services remain at the forefront of our industry, and we pride ourselves on delivering our services with the highest degree of integrity. SierTeK Ltd. is seeking a Lead Supply Technician (Day Shift) to support an opportunity at Randolph AFB, TX. PLEASE APPLY DIRECTLY ON OUR WEBSITE: POSITION OVERVIEW SECTION The Lead Supply Technician provides comprehensive logistics, supply chain, and material handling support to aircraft maintenance operations. The employee ensures efficient ordering, receiving, storage, and issuance of aircraft parts and bench stock to meet mission requirements. This position supports maintenance production activities by maintaining accurate inventory levels, coordinating with supply systems, and ensuring timely delivery of required materials. Essential Job Functions Material Handling & Inventory Management * Order, receive, store, issue, and transport aircraft parts, tools, and bench stock. * Conduct regular inventories and maintain accurate records of stored materials. * Determine stock levels for recurring and specialized items based on usage, project demands, and operational requirements. * Use authorized Air Force material ordering systems to order, track, and manage common and specialized items used on military weapon systems. Maintenance Support & Customer Service * Provide material research, order placement, and handling support to designated maintenance shops. * Maintain adequate on-hand stock levels to meet production needs; ensure timely replenishment of bench stocks. * Record issued items and quantities in written or electronic logs. * Research and analyze Bench Stock Levels (BSLs), recommend adjustments to optimize stock accuracy and efficiency. Specialized Support Activities * Deliver and pick up materials at depot supply points and outlying locations as needed. * Inspect and operate general and special-purpose vehicles, including forklifts; document inspections using AF Form 1800. * Perform manual lifting of up to 50 pounds. * Provide material management support for repair, overhaul, manufacture, and/or modification of specialized equipment and parts. Coordination & Communication * Respond to unique or urgent material requests requiring additional data verification or expedited procurement. * Ensure all item data (e.g., part numbers, pricing, and stock codes) is accurate and complete. * Coordinate material delivery dates and provide customers with order status updates. * Manage back orders, cancellations, and repairable turn-ins to maintain supply chain integrity. * Review and process excess materials for credit return. * Serve as a material management representative on the Tail Team/Integrated Product Team (IPT). * Support the Awaiting Parts Program (AWP) and participate in Rapid Improvement Events and Art of the Possible (AoP) initiatives. Qualifications Minimum Position Requirements * Education: High School Diploma or equivalent. * Experience: * Working knowledge of supply systems, inventory control processes, and Air Force logistics operations. * Familiarity with applicable supply chain policies, manuals, and work methods. * Skills: * Basic computer proficiency and ability to use supply and tracking systems. * Strong attention to detail, organization, and communication skills. * Physical Requirements: * Ability to lift up to 50 pounds. * Operate forklifts and general/special-purpose vehicles safely. SierTeK is an equal opportunity employer. Employment is decided based on qualifications, merit, and business need. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran status, gender identity and sexual orientation. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, transfer, leaves of absence, compensation, and training. If you need assistance or accommodation due to a disability, you may contact us at 1+833.743.7835.

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Profit sharing, • Careers Advancement Opportunities, • Flexible Scheduling Every day is different in our busy automotive service center! You will be responsible for a variety of tasks, including overseeing service advisors, addressing customer inquiries, and managing required documentation. Responsibilities • Manage a team of automotive service professionals to ensure a high level of employee morale and customer satisfaction while maintaining profitability, • Ensure repairs and maintenance tasks are completed in a timely manner, • Mentor employees on best practices for improving sales and customer service techniques, • Oversee day-to-day operations of the service department, • Manage the flow of service department paperwork, including manuals, invoices, repair orders, and maintenance recordsQualifications, • High school diploma or GED required bachelors degree preferred, • Valid state-issued drivers license and clean driving record are required, • At least two years of experience as an automotive service writer or service advisor is required. Experience as an automotive service manager is preferred, • Deep understanding of automotive technology, automotive service technician job duties, and automotive repair services is required

Job Description We are currently seeking an Operations Supervisor to become an integral part of our team! You will be on your feet all day in a fast-paced, outdoor setting cleaning the interior and exterior of the vehicles. You will perform a variety of tasks including interior vehicle cleaning, cabin filter replacement, and any other necessary procedures to get the vehicle back in presentable condition. You will also identify and document vehicle conditions while promoting a safe and efficient working environment. Essential duties and responsibilities will vary. Responsibilities: • Clean interior and exterior of automotive vehicles, • Operate various equipment to clean interior of vehicle to assigned standards, • Keep accurate record keeping off all work performed, • Work independently and drive a team environment, • Develop processes and standards to maximize productivity and safety, • Continuously meet processing and standardization minimums, • Maintain team member productivity and quality checks on vehicles, • Maintain team member schedules and execute breaks and lunches, • Execute inventory control and maintain supplies and equipment, • Drive team member engagement, high level of productivity, and accountability for team Qualifications: • Previous experience as an automotive technician, detailer, or other related fields preferred, • 1 to 3 years Supervisor experience REQUIRED, • Computer experience REQUIRED, • Knowledge of various cleaning equipment, • Flexibility to handle multiple tasks in an organized manner, • Deadline and detail-oriented, • Ability to stand, walk, and bend while working outdoors in all types of weather conditions, • Professionalism, Accountability, and Ownership • Must have 1 (one) year of experience handling similar job responsibilities, • Must have prior driving experience in various vehicles (trucks, vans, cars), • Must have a current and valid driver's license with no moving violations and/or at-fault accidents on driving record in the past 3 years, • Must be authorized to work in the United States., • Must have reliable means of transportation odorzX is a rapidly growing company with unlimited growth opportunities. Possible opportunities include full-time (F/T) Vehicle Service Technicians, Vehicle Service Supervisors, and Operations Managers. Benefits Full Time Benefits Include: • Vacation Time, • 401k With Match, • Medical Benefits (Medical, Dental, Vision), • Sick Time, • Personal Days, • Company Paid Holidays, • Company Paid Car, Gas, Insurance (Job Specific), • Company Paid Travel (Job Specific), • Employee Referral Program, • Retention Bonus (Job Specific), • Quarterly Bonus (Job Specific), • Rapid Advancement Opportunities

Job DescriptionResearch Innovations, Inc. (RII) is breaking through the big, slow, status quo with transformative technology that fundamentally changes and improves the world. We develop cutting-edge software for all levels of the government and military. Using agile development practices and user-centered design, we create innovative software solutions for complex real-world problems. Currently, RII is seeking a motivated, mission oriented Systems Administrator I/II We are seeking a motivated mid-level Systems Administrator II to join our team supporting critical operations in secure facilities at a government contractor location. In this role, you will play a key part in maintaining and securing information systems, ensuring compliance with DoD standards, and managing network infrastructure in a classified environment. If you thrive in a high-stakes setting with a focus on cybersecurity and system reliability, this is an opportunity to contribute to mission-critical projects. Certifications: Must hold applicable DoD 8140 certifications (e.g., Security+, CISSP, or equivalent baseline certifications for Information Assurance Technician/Manager roles) This role requires an active US TS/SCI security clearance.WHAT YOU WILL BE DOING • Assisting with defining security requirements and designing solutions, providing guidance and implementing direction related to security technologies in secure, classified facilities., • Applying Risk Management Framework (RMF) and National Institute of Standards and Technology (NIST) Special Publication (SP) 800-53 controls to obtain and/or maintain Authority to Operate (ATO) for information systems (Linux/Windows) within government contractor environments., • Performing network and system security administration, including operating system security configuration, performance monitoring, and account management best practices for MS Servers/Windows and Linux., • Configuring and maintaining user account management interfaces and system supports, including direct customer interface in secure settings., • Utilizing security management capabilities and ensuring a secure, DoD-compliant service and system architecture., • Participating in the development of technical and/or management controls and implementing services in accordance with NIST SP 800-171 requirements for protecting the Confidentiality of Controlled Unclassified Information (CUI)., • Identifying and implementing security designs, preparing and maintaining engineering and security-related documentation tailored to government contractor standards., • Providing technical advice related to system security, vulnerabilities, security architecture, and security policies in classified environments., • Ensuring the rigorous application of information security and information assurance policies and procedures., • Working knowledge of classified environments and oversight on vulnerability assessments; defining, negotiating, and executing Assessment and Authorization (A&A) events., • Supporting the scheduling, performing, and maintaining of records for required information system auditing, patching, maintenance, software/hardware changes, and malware scanning based on evolving threats/vulnerabilities and compliance requirements., • Building servers (physical and virtual) and workstations (Windows/Linux), both physical and virtual, in secure facilities., • Minimum 4 years of hands-on experience with Linux and Windows system administration in mid-level roles, preferably in secure settings., • Experience with security features and/or vulnerabilities of various operating systems as defined by NSA, NIST, DISA (STIGs), and/or USCYBERCOM., • Experience with network and system security administration, including operating system security configuration and account management best practices for MS Windows and Linux., • Optimized system operations and resource utilization, performing system capacity analysis and planning., • Experience with Information Assurance (IA) vulnerability identification/remediation/testing and related network and system test tools (e.g., Security Content Automation Protocol (SCAP))., • Experience with information security toolsets such as anti-virus, Security Information and Event Management (SIEM), and/or Host-based Intrusion Detection Systems/Network Intrusion Detection Systems (HIDS/NIDS)., • Experience with VMware virtualization technologies, both server and desktop environments., • Hands-on experience managing firewalls, network switches, and routers in secure environments., • Self-starter requiring limited direction and supervision, with a proven ability to work independently in classified facilities., • Experience implementing DoD and Federal Risk Management Framework, IA Certification and Accreditation Processes, IA controls, and developing/maintaining associated certification and accreditation documentation., • Assisted in the implementation of required government policies (e.g., DAAPM, NISPOM, JSIG), made recommendations on process tailoring, participated in and documented process activities., • Applied Defense Counterintelligence and Security Agency (DCSA) processes and National Industrial Security Program Operating Manual (32 CFR/NISPOM) requirements, Intelligence Community Directive (ICD)-503 publications, and the Committee on National Security Systems Instruction (CNSSI) 1253 to new or existing information systems. #LI-TC1 At RII, we believe that diversity in our workforce is critical to our success. We strive to hire great people from a wide variety of backgrounds, not just because it’s the right thing to do, but because it makes us stronger. We work to help your intellectual passions and creativity thrive. It’s one of our core values: Let your geek flag fly. We also offer all employees comprehensive benefits including: flexible work schedules, health insurance coverage, paid time off, 401k with a company match, paid parental leave, access to wellness programs and much more. You get this all from day one, and all paid for by RII. It’s all part of another of our core values: Stay human. It’s why our comfortable and colorful offices such as our headquarters, include a community game room, pantry, massage chair, and an escape room, among other amenities. It’s why we have community ambassadors and regular community events. Research Innovations, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, genetics, disability status, protected veteran status, age, or any other characteristic protected by state, federal or local law. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Butterfly Effects' Mission is to make a socially meaningful change in the lives of children and families by hiring passionate, caring people to serve children and families affected by autism. We are looking for passionate ABA Registered Behavior Technicians to teach young children affected by autism. This isn't just another place to work, it's a welcoming environment with a leadership team that champions every individual to achieve their potential. We want you to enjoy coming to work, so we dedicate ourselves to making our teams feel valued, respected, and heard. Why Work at Butterfly Effects? • Children and families are at the heart of our work, and we take care of the people who make all the difference - People like You!, • Part-time opportunity to make a full-time impact in a child's life!, • Bring calm, protection, and happiness to families and children affected by autism, • Build a rewarding and valued career with education and training support. Our treatment involves working directly with the child and the family in their natural environment (most often their home but also in schools and our centers), to teach them how to communicate, share, play, wait, and other essential skills. BE's Behavior Technician / Child Interventionist makes the session fun by teaching through play-based activities. We offer training to all staff, so they feel confident in the skills required to instruct children affected by autism. The best fit for this role is someone very outgoing, energetic, and friendly. What do you bring to the role? • Minimum of High School diploma. College course work a plus, • Registered Behavior Technician Certification, • A love and Passion for working with children, • Interest in learning, • Valid driver's license & personal vehicle, • Web Enabled Device (laptop or tablet), • At least 3 weekdays w/ same availability We believe in fair and competitive compensation. As such, we provide benefits outside of your hourly rate to give you the support and energy you need to bring your best self to your role. Our team members may be eligible for the following benefits: • Tuition Assistance, • Drive-time pay between sessions Working with clients in their natural environments may require you to lift or move approximately 50 lbs. and be able to assume and maintain a variety of postures (kneeling, squatting, sitting, standing) for extended periods of time. Who are we? Butterfly Effects has served more than 10,000 families since our inception in 2005. We have a long history of improving the lives of children and families affected by autism spectrum disorder through our family-centric applied behavior analysis (ABA) approach. Our mission is to deliver ABA treatment in partnership with families affected by autism to foster a more joyous life. A national leader in autism treatment, Butterfly Effects employs more than 100 board-certified behavior analysts (BCBA) and 800 behavior technicians. The 12 states we serve are locally managed by a regional director and team of BCBAs. Our corporate office located in Deerfield Beach, Florida is home to our leadership team and administrative staff who assist with daily operations, including client services, human resources, talent acquisition, finance, revenue cycle management, quality assurance, compliance, professional development, and professional ethics. Our butterfly logo was chosen as a symbol of love, rebirth, and metamorphosis. Together, the name and logo represent our common purpose and deep commitment to helping families create lasting change through individualized ABA therapy. For more information, please visit . Job Posted by ApplicantPro

Job Description Water Mitigation Production Manager ???? Location: San Antonio ???? Full-Time Are you a seasoned water mitigation expert with leadership skills and a passion for operational excellence? We're looking for a Water Mitigation Production Manager to oversee daily operations, manage field technicians, and ensure top-tier service delivery. If you thrive in a fast-paced environment, have a strong technical background, and enjoy mentoring others, this is the opportunity for you! What You’ll Do: ???? Lead and manage daily operations, ensuring efficiency in production and procurement. ???? Conduct field evaluations and provide feedback to enhance team performance. ???? Collaborate with sales teams to meet client expectations and commitments. ???? Supervise and develop lead technicians, fostering a culture of continuous learning. ???? Ensure compliance with health and safety regulations. ???? Optimize operational processes and implement best practices. ???? Oversee manpower planning to meet project targets cost-effectively. ???? Manage large-scale water mitigation projects and high-volume events. ???? Act as a lead technician when needed. What You Bring: ✔ Minimum 3 years of water mitigation industry experience. ✔ Certifications Highly preferred or desire to obtain: • IICRC WTR (Water Damage Restoration), • IICRC ASD (Applied Structural Drying), • IICRC AMRT (Applied Microbial Remediation Technician) or equivalent If you’re ready to take the next step in your career, apply today and become a key player in our Water Mitigation Division! ???? Apply now! ???? Disclaimer The above statements are intended to describe the general nature and level of work being performed by associates assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. The Company reserves the right to modify this description in the future, with or without notice to the employee. This Job Description does not create an employment contract, implied or otherwise, and employment with the Company remains at will. These responsibilities are subject to possible modification to reasonably accommodate individuals with disabilities

JOB SUMMARY The Electrician & Maintenance Technician will assist production and maintenance with achieving NOV's daily KPI goals by troubleshooting and maintaining production equipment, as well as provide training for production supervisors, operators and maintenance personnel on an ongoing basis. This role will also assist with operational activities that support the manufacturing process, by providing skilled mechanical and electrical / electronic support to all areas of manufacturing, while maintaining all NOV Quality and Safety measures. PRIMARY DUTIES & RESPONSIBILITIES • Knowledge of electrical & mechanical controls, • Calibrate various equipment, • Troubleshoot electrical & mechanical problems and/or equipment, • Knowledge of electrical, pneumatic, and hydraulic schematics, • Perform preventative maintenance on equipment, • Repair electrical equipment safely and as quickly as possible after a breakdown, • Work on assigned projects, • Install new equipment, • Utilize safe work habits, • Wear appropriate PPE, • Comply with all NOV Company policies, guidelines and procedures, • Comply with all HSE policies, guidelines and procedures, • Comply with all Quality policies, guidelines and procedures\n JOB REQUIREMENTS • Ability to read pressure gauges, • Ability to work overtime and shift work as required, • Ability to read labels on pipe along with specs on paper, • Standing up to 12 hours daily, • Walking up to 12 hours daily, • Bending/Stooping up to 12 hours daily, • Repetitive movement up to 12 hours daily, • Push/Pull up to 12 hours daily, • Lifting weights up to 50 lbs. regularly, • Good vision required for safe operation of forklift, • Utilize recommended safe work habits and make use of all safety equipment provided, • Assist with OJT (On Job Training) employees as needed, • Work inside and outside, • Assist where and when as required \n EDUCATION & EXPERIENCE QUALIFICATIONS • High School diploma or equivalent, • Electrical license, electrical controls experience and/or certification, • Forklift license, • Three years of verifiable work experience, • Ability to read and design electrical prints, • Ability to read, write and speak English preferred\n BEHAVIORAL COMPETENCIES • Dependability/Attendance, • Thoroughness, • Problem Solving/Judgement\n TECHNICAL COMPETENCIES • Computer, PLC hardware and software, inverter drivers, photo-eyes, proximity switches, counters, level sensors, controllers and any other equipment requiring a computer or controls basis interface., • Multimeter, Amprobe, and hand tools., • Forklifts, scissor or bucket lifts., • Safety harness, LOTO equipment and any other safety equipment required by NOV, FGS, and OSHA., • Electrical disconnects, subpanels, and main switchgear to aid in the troubleshooting process., • Familiar with all components capable of production and storing energy so the interaction of these components as it pertains to the production equipment and safety can be maintained and operated in a safe and productive manner, • AC and DC controls, • Programmable controllers, • Knowledge of temperature controllers, electronic controllers, tachometers and PLC's, • Ability to adapt and be cross-trained to learn all job duties as required, • Ability to learn technical repair and assembly guidelines and procedures, • Ability to work in a fast-paced environment, • Ability to read drawings, instructions or repair and assembly operations\n NOV is an equal opportunity employer. This job description is subject to change without notice. This description is intended to explain the general nature and level of work being performed by people assigned to this position. It is not intended to be an entire list of all activities, tasks and skills required of people in this position. Every day, the oil and gas industry's best minds put more than 150 years of experience to work to help our customers achieve lasting success. We Power the Industry that Powers the World Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success-now and in the future. Global Family We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work. Purposeful Innovation Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better. Service Above All This drives us to anticipate our customers' needs and work with them to deliver the finest products and services on time and on budget.

Job DescriptionPool Renovation Technician Job Description In this role, you will be a vital part of our growing pool service company, contributing to our mission of providing exceptional service and Renovations to our customers. Your expertise will not only ensure high-quality Renovations but will also position you as a mentor to help train and support other technicians. With your skills and customer-focused mindset, you will help us maintain excellence and achieve customer satisfaction while playing an integral role in our team's growth and success. Responsibilities Pool Renovation Quotes: Deliver clear, detailed, and visually inspiring renovation quotes that balance technical precision with creative vision. As a Renovation Technician, you’ll take accurate measurements to ensure material precision, minimize waste, and produce reliable cost estimates. Each quote should include the correct line items for plaster, tile, coping, lighting, and other upgrades for customer's pools —reflecting our standards for quality, safety, and craftsmanship. Beyond accuracy, your quotes should bring the renovation to life for customers, showcasing the transformation of their pool with new plaster finishes, bold tile designs, and lighting that elevates their entire backyard experience. Through confident, professional communication, you’ll listen to customer goals, answer questions, and present renovation options that are both exciting and dependable. By blending accuracy with artistry, you’ll create quotes that build trust, highlight our craftsmanship, and give customers confidence in their investment. Customer Communication: • Before Service: Communicate with customers ahead of your arrival to confirm the appointment, share your expected arrival time, and address any preliminary questions., • During Service: Keep customers informed throughout the quoting process, explaining options and recommended solutions clearly and professionally. Plaster Start-Ups as Needed: Renovation Technicians are also responsible for managing plaster start-ups following pool resurfacing. This includes coordinating pool fill-ups, adding start-up chemicals, initiating pump operation, and ensuring proper filter service. Technicians provide homeowner guidance on brushing protocols and maintain close coordination with the Service and Repair Teams for multi-week follow-up visits and final system setup. Adhering to start-up best practices is critical to ensure new plaster cures correctly, maintains its finish, and provides customers with a long-lasting, beautiful renovation. (Poolie Start Up Guide - All Branches) Quality Control (QC): Deliver exceptional service and attention to detail to ensure Renovations meet or exceed customer expectations, fostering long-term satisfaction. When quality control issues do arise, handle them as a top priority by addressing the problem promptly, communicating openly with customers, and implementing immediate solutions to resolve concerns. Ensure follow-up actions are taken to prevent recurrence and maintain trust in our commitment to excellence. Leak Detection Services as Needed: Renovation Technicians are expected to perform thorough leak detection services as part of internal support. This includes conducting visual inspections of equipment, lines, and pool structures, performing dye and pressure tests, and utilizing sonar gear to identify hidden leaks. Technicians must be able to accurately diagnose issues such as spillover, wall, skimmer, or deck/foundation leaks, and document findings for repair planning. By applying consistent testing methods and attention to detail, you will help ensure accurate diagnoses that protect customer investments and maintain pool integrity. (Leak Detection Training Checklist) Team Collaboration & Communication:Work closely with the service and repair teams to support daily operations, share knowledge, and contribute to a collaborative, team-focused environment. Actively participate in team communication via Slack and other channels to ensure seamless coordination, provide updates on ongoing renovations, ask for or offer troubleshooting support, and communicate relevant details that keep projects running smoothly. By maintaining open, proactive communication, you help drive efficiency, strengthen teamwork, and support overall company success. Qualifications: • Previous experience in pool service or sales is required., • Valid driver's license., • Ability to be outside in all Texas weather conditions., • A great team-player attitude with the flexibility to wear multiple hats., • Strong customer service mindset and communication skills., • 8-hour shift, • Day shift, • Medical, Vision, and Dental Insurance, • Short- and Long-Term disability paid for by company, • Employee Assistance Programs for mental health and wellness, • Paid Time Off, • 10 Company Holidays, • Training and Development Opportunities, • In Office- [Branch Location], • 8:am-5:00 pm Monday - Friday PI387c8ce6f443-25405-39248144

Job DescriptionTier 3- Maintenance Tech Job Purpose: The tier 3 maintenance technician will report to the Facility Manager and participate in overseeing & maintaining the Army Residence Portfolio of 195 high rise units & 186 cottages, Health Care Center of residential property space within the ARC Community. The responsibilities include assisting with day to day maintenance & operations of department & staff in order to maintain a quality infrastructure. Qualifications: • Valid driver's license with proof of auto insurance, • at least 2 yrs experience in hvac, residential and commercial, and has an EPA certification to handle refrigerant., • At least 2 yrs experience in minor plumbing and electrical. These are the primary trade skills that are needed., • Secondary skills would be carpentry and painting., • Appliance repair, standard and commercial is a plus., • Ability to manually operate tools, • Demonstrate excellent customer service skills, • Ability to multi-task, • Able to lift at least 50 pounds, • Frequent kneeling, crouching, bending, and reaching, • Ability to work outdoorsThis job is a civilian position and does not require military service (including commission and enlistment) This job description is not, nor is it intended to be, a complete statement of all duties, functions responsibilities and qualifications that comprise this position. This position is intended to be general and may evolve over time. The description is subject to periodic updating. At management's discretion, the employee may be assigned to different or additional duties from time to time. Compensation details: 15.38-20.16 PIbe3d32289d92-25405-38645938

Job Description Leapros Skilled Trades is actively hiring a Low Voltage Superintendent in San Antonio, TX. As a trusted partner in the construction industry, we connect top talent with top companies across the United States. Job Type: Contract to Hire Pay: $45 to $55 Per Hour BOE Responsibilities: • Provide technical expertise throughout the Pre-Construction process., • Participate in the Constructability review., • Assist in the Pre-Construction schedule., • Oversees and schedules all technician manpower across assigned geographies., • Follows and administers union contract regarding lay-offs and recalls., • Maintain the process of having leads or foreman report daily timecards., • Work with PM on man loading scheduling, budget hours and materials staging., • Maintain daily site visits of projects within 2-hour drive from office., • Maintain bi-weekly site visits of projects within a 5-hour drive from office., • Maintain monthly site visits of projects outside of 5-hour drive of office., • Ensure job safety requirements are understood and implemented by all project personnel and trade contractors, working with the safety support personnel as a resource., • Report all safety incidents to VP Operations, PM, and safety personnel., • Understand project estimate and budget set-up., • Mentor and train other employees., • Manage, lead, and complete paperwork and process outlined in Field Career Progression program., • Manage all test results and finalize at the end of each project., • Participate in determining sequence and activity duration on schedules for proposed projects., • Forecast manpower allocation for future work., • Understand and communicate to all field personnel the goals regarding construction., • 10 plus years related experience or equivalent role, • OHSA 30 certification, • Must meet Motor Vehicle Record requirements., • Must meet all requirements to be properly badged and able to meet all client requirements to access the jobsite., • Familiar with construction management software as needed., • AutoCAD, a plus for use with scheduling, spreadsheets, and cost control, • Excellent communication skills., • A thorough knowledge of legal issues and safety standards is essential., • Ability to plan and organize a team effort., • Good client management and goodwill building ability., • Effective time management and logical decision-making ability., • Capacity to handle pressure., • Be willing to travel extensively across multiple sites., • Strong focus on quality and safety., • Ability to remain calm, focused, and effective under pressure situations., • Must be aware of OSHA safety standards, • Maybe exposed to heights and loud noises, • May need to occasionally climb stairs and/or ladders., • Occasional stooping, kneeling, and bending, • May need to lift up to 25 pounds on occasion. Benefits Summary • We offer a comprehensive benefits package that includes:, • Medical, dental, and vision insurance, • Paid Sick Time

Job Description Tri-Starr Talent is currently seeking an experienced and compassionate Veterinary Technician to join our client’s dedicated team. This role offers an exciting opportunity to work in a rewarding environment providing exceptional care to animals while supporting veterinary staff with medical procedures and client communication. Schedule: Days Vary, hours between 7:00am-7:00pm Pay Rate: $21.15/hr Responsibilities: • Assist veterinarians during surgical procedures, including patient preparation, anesthetic monitoring, and post-operative recovery care., • Administer medications, vaccines, anesthesia induction support, and prescribed treatments under veterinary supervision., • Collect and process lab samples, perform basic diagnostic tests, and accurately document medical findings., • Monitor animals’ vital signs, behavior, and recovery progress, ensuring proper pain management and safety protocols., • Provide compassionate care and safe handling of animals before, during, and after surgery., • Perform kennel tech responsibilities including feeding, cleaning, sanitizing kennels, and monitoring animals housed for boarding or recovery., • Educate pet owners on surgical aftercare, preventive care, medication instructions, and follow-up treatment plans., • Maintain sterile surgical areas, exam rooms, and medical equipment, and assist with inventory, stocking, and general clinic operations. Requirements: • High school diploma or GED equivalent (recognized by the Texas Education Agency or a regional accrediting agency)., • One (1) year of animal health care assisting a veterinarian, animal control or animal care experience., • Valid Class "C" Texas Driver's License.Company DescriptionWith 40 years of experience, Tri-Starr Talent is comprised of exceptionally talented and experienced Recruiters, Researchers, Interviewers and Industry Experts. Through in-depth research and one on one coaching, we identify your strengths and match them with positions that allow you to thrive - no excuses. At Tri-Starr, we work for you.With 40 years of experience, Tri-Starr Talent is comprised of exceptionally talented and experienced Recruiters, Researchers, Interviewers and Industry Experts. Through in-depth research and one on one coaching, we identify your strengths and match them with positions that allow you to thrive - no excuses. At Tri-Starr, we work for you.

Job Description T. Madison LLC DBA Traffic Plan is a full-service provider of traffic control services and equipment to utility companies, municipalities and private contractors throughout the Mid-Atlantic. With headquarters in central New Jersey, we are a woman-owned business certified by the Women’s Business Enterprise National Council (WBENC). While safety is at the heart of everything we do, we understand the need to see the bigger picture. We protect our customers and the traveling public, so our communities and infrastructures are not only maintained but improved for a brighter future. We are your partner in progress. The Field Technician is responsible for executing traffic control operations in accordance with company procedures, TXDOT specifications, and project requirements. Under the direction of the Field Supervisor or Operations Manager, the Field Technician performs critical functions such as sign installation, flagging, lane closures, and detour setups. This role requires a strong understanding of safety protocols, plan interpretation, and a commitment to maintaining safe and efficient work zones for both workers and the public. Essential Duties and Responsibilities: • Follow directions from the Operations Manager, Supervisor, or crew lead regarding daily job assignments and worksite procedures., • Install, maintain, and remove traffic control devices such as signs, cones, barrels, and barricades according to Texas DOT standards and traffic control plans., • Conduct flagging operations, control the movement of vehicles through construction zones, and communicate clearly with motorists using hand signals, signs, or two-way radios., • Assist in the setup and breakdown of lane closures, detours, and temporary traffic patterns as specified in work zone plans., • Read and interpret traffic control plans, project drawings, and detour routing instructions., • Ensure safety for workers and motorists by maintaining awareness of traffic movement and promptly reacting to unsafe conditions., • Inform motorists of detour routes, traffic changes, and work zone guidance when required., • Keep all traffic control equipment clean, organized, and in good working order on company trucks., • Drive company vehicles to and from job sites as required (must be authorized and licensed)., • Maintain a clean and professional appearance and provide a high level of customer service on every project., • Support other crew members and assist in additional tasks as needed to ensure overall crew performance and work zone safety. Physical & Environmental Requirements: • Ability to work outdoors in all weather conditions (heat, cold, rain, etc.), • Must be able to lift 50+ lbs. regularly, • Stand for extended periods and move continuously throughout shift, • Comfortable working near live traffic and in active roadway environments Required Competencies and Qualifications: • Excellent attendance and punctuality are a must, • Dependable transportation to and from work sites, • Strong work ethic, ability to follow instructions, and respect for leadership, • Ability to multitask and function well in a team-oriented environment, • Willingness to travel within the assigned region for daily job assignments, • Must wear required PPE at all times (work boots, hard hat, high-visibility safety vest), • Knowledge of basic safety regulations, work zone safety practices, and traffic control procedures Preferred Qualifications (Not Required): • Prior experience in traffic control, construction, or utility work, • Familiarity with Texas DOT specifications and MUTCD guidelines, • Flagger certification (ATSSA or equivalent), • Valid driver’s license with clean driving record Compensation details: 15-23 Hourly Wage PI7a24e02705a0-25405-38654390

About USS: United Site Services is the industry leader in comprehensive site services, committed to creating partnerships that help enable our customers’ project and event success. Our deep industry expertise, excellence in process management, and dedication to corporate responsibility are pillars of our value proposition; each supported by tangible, best-practice programs. Our success is fueled by the dedication and collaboration of our diverse team, which includes field technicians, customer care representatives, sales professionals, and functional experts. Each member of our team plays a vital role in ensuring a seamless and reliable experience for our customers. By joining United Site Services, you will be part of an organization that values continuous improvement, teamwork, and excellence in every aspect of our business. Overview: The Service Technician operates a company service truck and drives to various locations to service/pump/clean portable restrooms and/or holding tanks. This position is the heart of our business. Responsibilities: • Perform basic service truck driving functions in accordance with USS and DOT requirements., • Perform all work duties in a safe manner in accordance with USS and DOT safety standards to ensure no accidents or injuries., • Perform duties by sitting, standing, stooping, kneeling, crouching or crawling. In addition, perform lifting/pushing between 50 and 150 lbs. on a frequent basis during work shift., • Conduct portable toilets servicing to USS 8 point service standard., • Perform customer service interaction when on customer work sites to ensure they are getting the services completed to their standard., • Ability to be flexible in order to meet customer needs when routes needs to be adjusted or changed., • Provide routing feedback to Operations Manager/Supervisor/Coordinator to be most efficient as well as giving the customer the best service possible., • Ability to strategically plan for customer needs by discussing their portable toilet needs, so the customer's current and future needs are satisfied. Qualifications:, • Minimum two years of commercial driving experience., • Valid CDL., • Excellent time management, customer service and communication skills., • Strong problem-solving and decision making skills. Physical Requirements:, • Sit while driving and stand while servicing products, • Use hands and fingers to handle, control or feel objects tools or controls, • Repeat the same movements, • See details of objects that are less than a few feet away and also at greater distance, • Speak clearly so customers can understand, • Understand the speech of another person, • Hear sounds and recognize the difference between them, • Walk up to 30 minutes at a time without exertion, • Enter and exit equipment by stepping and kneeling, • Lift up to 40lbs from your waist to your shoulders, • Lift 30lbs from the floor to your head, • Crouch and squat, • Holiday & Paid Time Off (pro-rated for Part-Time employees), • Medical/Pharmacy, • Dental, • Vision, • Employer-Paid Short-Term Disability, • Employer-Paid Employee Basic Life & Accidental Death and Dismemberment, • Voluntary Employee Life & Accidental Death and Dismemberment, • Voluntary Spousal Life, • Voluntary Dependent Life, • Hospital Indemnity, Accident and Critical Illness, • Commuter/Transit Account, • Healthcare Flexible Spending Account, • Dependent Care Flexible Spending Account, • Health Savings Account, • 401(k) with employer match, • Employer-Paid Employee Assistance Program (EAP), • Employee Discounts Salary Range: $17.64 – $23.81 / hour Pay Transparency Statement: At United Site Services, our salary ranges reflect the minimum and maximum base pay for the posted position applicable to all locations across the US. Within the posted salary range, individual pay is determined by the geographic location, job related skills, experience, education, and certifications. Our total compensation package includes base pay plus a comprehensive benefits program. EEO Statement: Some positions may require secure site access and/or domestic air travel. All candidates for positions which require secure site access and/or domestic air travel must possess an acceptable form of identification to comply with state and federal regulations, such as REAL ID-compliant driver’s license or state ID, or U.S. passport. This statement is not intended to require documentation beyond what is acceptable under the federal I-9 form process administered by the U.S. Citizenship and Immigration Services (USCIS); and should not be construed as creating additional employment eligibility verification requirements. United Site Services is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: race, color, religion, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation , gender identity , age (40 and over), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status or any other status protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers.

Auto Body Technician Classic Collision was established in 1983 in Atlanta, Georgia with one single goal: To offer quality service to its customers with integrity and honesty. Be a part of a rapidly growing company whose mission is to put safety, quality, integrity, and heart into every vehicle we repair and customer we serve. Classic Collision offers competitive pay, benefits, and career advancement opportunities. Please come and join our team! Why Choose Classic Collision? • Paid Weekly, • Continuous Training, • Supportive Team Culture, • Company match 401K, • Medical/Dental/Vision, • Paid Time Off - 6 Paid Holidays, • Rewarding Work Responsibilities • Complete disassembly of vehicle to assist Collision Estimators in assessing damage to prepare a 100% Repair Plan, • Ensure all needed repairs identified to eliminate supplements and minimize repair time, • Plan work procedure: follow work order for all operations listed, • Remove upholstery, accessories, electrical and hydraulic windows, and seat operating equipment to gain access to damaged area of vehicle if needed. Store parts on carts or cover to eliminate potential damage, • Mend damaged body by hammering out or filling in dents and welding broken parts; ensure all gaps and fits are to industry standards; remove damaged panels and bolts or welds replacement parts in position and reassemble after parts are painted, • Operate a variety of hand and power tools (e.g. welder, soldering equipment, cutting torch, blocks, hammers, wrenches, sander, spray guns, etc.), • File, grind, and sand repaired surfaces before turning vehicle over to the Paint Dept., • Repair or replace defective parts, • Ensure all needed repairs identified to eliminate supplements and minimize repair time, • Inspect and test drive repaired vehicles to check for compliance with safety and quality standards, • Perform other related duties as assigned, • Comply with all Classic Collision standard operating procedures, safety, rules, and guidelines Qualifications • Must be at least 18 years of age, • I-CAR / ASE certifications preferred, • 2-3 years’ collision repair experience preferred, • Valid Driver's License Required, • Customer-focused attitude with the ability to work well in a team environment, • Ability to read and comprehend written instructions and information, • Successful completion of background check required Behaviors/Competencies: • Integrity-Respect and accountability at every level and every interaction, • Customer Service-Provide the highest level of customer service while building customer satisfaction and retention, • Innovation-Develops and displays innovative approaches and ideas to our business, • Teamwork-Contributes to building a positive team spirit and supports everyone’s efforts to succeed Physical & Environmental While performing the duties of this job, the employee is regularly required to use hands, and is required to talk and hear. The employee is frequently required to stand, sit, and walk occasionally for long periods at a time. The employee may occasionally be required to reach with hands, arms and move objects up to 20 pounds. Specific vision abilities required by this job include close vision, peripheral vision, and ability to adjust focus. In addition, abilities for assessing the accuracy, neatness and thoroughness of the work assigned is required. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individual with disabilities to perform the essential function. Classic Collision is an Equal Opportunity Employer: As an equal opportunity employer, Classic Collision does not discriminate against any employee or candidate based on age, race, gender identity, gender expression, genetic information, national origin, physical or mental disability, protected veteran status, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by all applicable federal, state, and local laws. Reasonable Accommodations: Classic Collision is an equal opportunity employer that is committed to working with and providing reasonable accommodations to individual with disabilities. If you have a disability and you believe you need a reasonable accommodation to search for a job opening or submit an online application, please e-mail or call (470)500-6808. This email and phone number are listed exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. This job description is not a complete statement of all duties and responsibilities comprising the position. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.