Trabajos plastics en New York, New YorkCrear alertas

Job Description Hosokawa provides size reduction systems and powder processing solutions for chemical, pharmaceutical, food, mineral, plastics, and cosmetic applications. Throughout our history, we have led the industry in coarse to ultra-fine grinding, classification, mixing, drying, containment, compaction, and analytical equipment. This position is responsible for assembling in-house manufactured parts and vendor-supplied components into sub-assemblies and finished rotating machinery. The role also includes evaluating and repairing returned equipment. Quality, safety, and accuracy are essential to ensure machinery performs reliably and supports company profitability and customer satisfaction. Essential Duties: • Review work orders and pull required parts from inventory., • Verify all parts, finishes, and paint meet quality plans and customer specifications., • Assemble components to ensure proper fit, alignment, and function., • Test assemblies with engineering support and document results., • Follow safety protocols when handling parts ranging from 1 lb. to several tons., • Meet standard assembly times and on-time delivery goals., • Install bearings using hydraulic presses, induction heaters, and hand tools., • Align direct and belt-drive systems., • Set proper bolt torque and clearances., • Uses cranes, hoists, and lifts safely., • Wire junction boxes and install small control panels as needed. Basic Qualifications: • High School Diploma or GED, • 3+ years' experience installing bearings for high-speed equipment., • 2+ years' experience installing drive components, belts, and couplings, including performing alignments., • Must own standard tools (screwdrivers, Allen wrenches, socket sets - metric & standard, pliers, hammers, mallet, measuring tapes, etc.). Preferred Qualifications: • Experience with light wiring for low and high voltage systems (up to 250 HP, 460/3/60)., • Knowledge of balancing effects on rotating equipment Physical Requirements: • Ability to lift and handle components ranging from 1 lb. to several tons (with proper lifting equipment)., • Ability to stand, bend, and reach for extended periods., • Consistent adherence to safety protocols and use of required PPE. Salary Range: $46,672 - $ 79,318 Salaries will vary and may be above or below this range commensurate with several factors including experience, education, training, location, and merit. Hosokawa Micron Powder Systems provides equal employment opportunities to applicants and employees without regard to race; color; sex; gender identity; sexual orientation; religious practices and observances; national origin; pregnancy, childbirth, or related medical conditions; status as a protected veteran or spouse/family member of a protected veteran; or disability. Hosokawa Micron Powder Systems is committed to providing reasonable accommodation to, among others, individuals with disabilities and disabled veterans. If you need an accommodation because of a disability to search and apply for a career opportunity with Hosokawa, please send an e-mail to hr@hmps.hosokawa.com to let us know the nature of your accommodation request and your contact information.

GWR Medical is a leading NY State Medicaid Provider for topical oxygen wound therapy since 2008. GWR seeks part time and full-time candidates with a 2-5 year minimum years experience in wound care sales. Call points are wound care clinics, hospital clinics, offices of podiatric, vascular, burn, plastics and general surgeons across the 5 NY boroughs. Full training provided to develop medical device, wound care therapy and market knowledge, goal setting and successful achievement in unique wound care environments. Candidate must perform responsibilities with a high level of sales proficiency and professionalism. Base salary, commissions and bonus levels, 401(K) and health benefits. Requirements Undergraduate degree with academic and industry success. Wound care sales experience strongly preferred. Organization and communications skills combined with initiative, motivation and leadership skills are keys to success. Technical aptitude and computer skills required to fully utilize the company's Management Information System for sales representative's performance management, and utilization of the company's Wound Tracking Outcomes Digital Software Program for company's sales force, payers, doctors and patient use.

Molding Process Engineer Location: Northvale, NJ Position Type: Direct Hire, Full-Time Department: Production Reports To: Engineering & Tooling Manager FLSA Status: Exempt Position Summary We are seeking an experienced Molding Process Engineer to join our manufacturing team in Northvale, NJ. This role is responsible for improving injection molding processes, increasing manufacturing efficiency, reducing scrap, supporting new product launches, and driving continuous improvement initiatives. The ideal candidate will possess strong technical expertise in injection molding, polymers, tooling, and troubleshooting while working closely with engineering, tooling, quality, and production teams. Key Responsibilities • Improve manufacturing efficiency through workflow analysis, equipment optimization, plant layout improvements, and Lean Manufacturing methodologies., • Analyze and control molding-related manufacturing costs, including labor, materials, scrap, and production expenses., • Diagnose and resolve complex molding, tooling, machine, and material-related issues to improve product quality and reduce downtime., • Optimize injection molding processes to improve cycle times, productivity, and overall equipment effectiveness (OEE)., • Develop, document, and maintain standard operating procedures (SOPs) and work instructions., • Train operators, technicians, and production personnel on process standards and best practices., • Collaborate with engineering, quality, tooling, and production teams to achieve manufacturing objectives., • Develop and implement quality control procedures to ensure products consistently meet customer and internal quality standards., • Maintain and manage molding Bills of Material (BOMs)., • Lead all pre-launch activities including prototype, pilot, validation, and production readiness builds., • Support successful new product introductions and ensure a smooth transition into full-scale production., • Drive continuous improvement initiatives utilizing Lean Manufacturing and Six Sigma methodologies., • Analyze process data and implement corrective actions to improve performance, quality, and efficiency. Qualifications • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Plastics Engineering, or related technical field preferred., • 3+ years of injection molding process engineering experience in a manufacturing environment., • Strong experience with injection molding process development, validation, and troubleshooting., • Advanced troubleshooting skills related to molding machines, tooling, materials, and processes., • Strong understanding of polymers, resins, and mold design., • Working knowledge of Lean Manufacturing, Six Sigma, and continuous improvement methodologies., • Experience supporting new product launches and manufacturing scale-up activities., • Ability to read and interpret engineering drawings, specifications, and technical documents., • Strong problem-solving, communication, and project management skills., • Intermediate to advanced mechanical and/or electrical engineering knowledge. Preferred Qualifications • Six Sigma certification preferred., • Experience in medical device, automotive, electronics, or precision plastics manufacturing environments., • Knowledge of scientific molding principles and process validation techniques. Compensation & Benefits Competitive salary, comprehensive benefits package, paid time off, and opportunities for professional growth and advancement. Direct Hire Opportunity | Northvale, NJ

Job Purpose The Industrial Engineer role is primarily responsible for company-wide continuous improvement initiatives. Key Responsibilities and Duties • Participates individually or on cross-functional teams focused on relentless continuous improvement and problem solving activities throughout the company. May require traveling to other locations., • Research, justify and implement cost saving projects that focus on safety, quality and sustainability., • Assist corporate Technical Services department with project creation and implementation., • Design, Integrate and maintain automated process data collection systems., • Design, Integrate and maintain automated alarming systems notifying the plant of down equipment., • Design, construct and install automation devices., • Responsible for continuous improvement initiatives in OEE, SMED, and sustainability., • Monitor equipment downtime and operator reports and lead Root Cause Analysis initiatives to eliminate downtime or equipment variation., • Assist with equipment troubleshooting, repair, installation, change-over, and PM as necessary., • Other duties as assigned. Experience, Educational and Technical Qualifications Preferred candidate has Associates degree in Technology, Electrical, Electronics, Electro-Mechanical or certification in a similar technical area. Must have excellent knowledge of SPC, plastics, electrical, electronic hydraulics, mechanical and pneumatic functions. Must have strong written and verbal communication skills and strong organizational and problem-solving skills. Must have and be able to demonstrate intermediate math skills. Must have ability to read blueprints and be able to use precision measuring/inspection equipment. Requires leadership and excellent interpersonal skills to provide training to team members and other department employees. #LI-BH1

Supply Chain Manager PTI Tech | Clifton, NJ | On-Site About the Role PTI Tech is looking for a hands-on Supply Chain Manager to oversee purchasing, strategic sourcing, supplier relationships, inventory management, and warehouse/logistics operations. This is an important role within our manufacturing operation. You'll be responsible for making sure the materials, components, tooling, and outside services we need are available when production needs them, at the right cost and quality. A key part of the role involves purchasing materials used in our manufacturing processes, including plastic resins and polymers, metal powders and feedstock, injection mold tooling, precision-machined components, and other production materials and services. You'll lead purchasing and supplier management while overseeing warehouse and logistics operations through the Warehouse Supervisor. We're looking for someone who understands manufacturing, enjoys working directly with suppliers and internal teams, and knows how to balance cost, quality, inventory, and delivery. What You'll Be Doing Purchasing & Strategic Sourcing • Lead purchasing activities for raw materials, including plastic resins, polymers, metal feedstock, metal powders, components, tooling, packaging, and production supplies., • Source and purchase materials used in plastic injection molding, Metal Injection Molding (MIM), CNC machining, and other manufacturing processes., • Manage purchasing of injection mold tooling, mold components, precision-machined parts, tool steel, and outsourced services such as machining, heat treating, and finishing., • Request and evaluate supplier quotes, comparing pricing, quality, lead times, freight, and overall value., • Negotiate pricing, payment terms, minimum order quantities, delivery schedules, and supplier agreements., • Build strong supplier relationships and identify opportunities to improve cost, quality, delivery, and reliability., • Identify potential supply disruptions and develop backup sourcing plans to keep production moving., • Work with Quality to address supplier issues, certifications, nonconformances, and corrective actions., • Support customer quoting by obtaining accurate material, tooling, component, freight, and outside-service costs. Inventory, Materials & Planning • Use ERP/MRP systems, production schedules, inventory levels, and supplier lead times to determine what needs to be purchased and when., • Work closely with Production and Planning to ensure materials are available when needed., • Maintain accurate purchasing information, supplier records, and inventory data within the ERP system., • Oversee inventory management, including cycle counts, ABC classifications, and inventory accuracy., • Monitor inventory levels, turns, and excess or obsolete materials., • Identify opportunities to reduce inventory costs without putting production schedules at risk. Warehouse & Logistics • Oversee warehouse and logistics operations through the Warehouse Supervisor., • Ensure effective shipping, receiving, material staging, inventory control, and warehouse organization., • Maintain an organized, efficient warehouse environment with a focus on safety and 5S practices., • Manage relationships with freight carriers, including LTL, FedEx, UPS, and other shipping providers., • Monitor freight costs and identify opportunities to improve shipping efficiency., • Oversee customer and supplier returns and ensure accurate system transactions., • Ensure domestic and international shipments meet applicable ITAR, export-control, customs, and shipping requirements. Leadership & Continuous Improvement • Work closely with Production, Planning, Engineering, Quality, Finance, Sales, and Warehouse teams to resolve material shortages, supplier issues, and delivery challenges., • Lead and support the Warehouse Supervisor, providing direction, coaching, and accountability., • Develop and improve purchasing, inventory, shipping, and receiving processes., • Monitor key performance indicators related to supplier performance, purchasing costs, inventory, freight, and on-time delivery., • Identify opportunities to improve efficiency, reduce costs, and strengthen overall supply-chain performance. What We're Looking For Required Qualifications • At least 5 years of progressive experience in purchasing, procurement, supply chain, materials management, or inventory management within a manufacturing environment., • Experience sourcing materials, negotiating pricing, and managing supplier relationships., • Understanding of manufacturing materials, production requirements, and the importance of maintaining material availability., • Strong ERP/MRP experience and the ability to use system data to make purchasing and inventory decisions., • Knowledge of inventory control, cycle counting, warehouse operations, and material flow., • Strong negotiation, analytical, organizational, communication, and problem-solving skills., • Leadership experience, including the ability to guide, develop, and hold team members accountable. Preferred Qualifications • Experience purchasing plastic resins, polymers, and injection molding materials., • Familiarity with injection molding, Metal Injection Molding (MIM), CNC machining, or other precision manufacturing processes., • Experience purchasing tooling, mold components, metal powders, precision-machined parts, and outside manufacturing services., • Background in plastics manufacturing, engineered materials, aerospace, defense, medical, or automotive manufacturing., • Bachelor's degree in Supply Chain, Business, Engineering, Operations, or a related field. Equivalent manufacturing experience will also be considered., • Experience with supplier scorecards, RFQs/RFPs, cost analysis, and supplier performance improvement., • Familiarity with ITAR, export controls, ISO 9001/AS9100, PPAP, or other regulated manufacturing requirements., • Experience with IQMS/DELMIAWorks is a plus. What Success Looks Like • Materials and components are available when production needs them., • Strong supplier relationships and improved supplier delivery and quality., • Competitive purchasing costs and reduced unnecessary spending., • Accurate inventory levels and fewer shortages or excess materials., • Reliable shipping and receiving operations., • Improved inventory turns and on-time customer deliveries., • A well-organized, efficient warehouse and purchasing operation. Work Environment This is an on-site, hands-on leadership position based at our Clifton, NJ manufacturing facility. You'll spend time both in the office and throughout the manufacturing operation, including the warehouse, shipping and receiving areas, and production floor. The role requires someone comfortable working in an active manufacturing environment. The facility includes typical production-floor conditions, warehouse traffic, forklifts, trucks, noise, and temperature variations. Appropriate PPE is required in designated areas. Occasional supplier visits and business travel may be required.

Evermark is a newly formed beauty and personal care company bringing together a portfolio of iconic, everyday brands with enormous reach and untapped potential: Suave, ChapStick, Q-tips, Caress, St. Ives, TIGI Bed Head, Noxzema, Pond’s, Lever 2000. These are brands people know, trust, and use daily - and we are building their next chapter. Backed by a growth-oriented YellowWood Partners, we operate with speed, focus, and accountability. Our goal is simple: modernize these brands, accelerate growth, and build a company that consistently outperforms expectations. That means sharpening strategy, raising the bar on execution, and making smart, decisive moves across the enterprise - from how we plan and operate to how we go to market. This is a company in motion. We are scaling quickly, building new capabilities, and creating the operating model as we go. For the right people, that means rare access, real influence, and the opportunity to help shape not just a role, but a company. Duration: 6 months, with possibility to extend Location: Hackensack, NJ Hybrid: 3 days a week Position Summary The Packaging Consultant reports to the Packaging Director and supports day-to-day packaging development activities for both innovation initiatives and base business needs. This role collaborates closely with cross-functional partners across SBC, as well as external suppliers, to bring product concepts to life from initial design through commercialization. The ideal candidate brings strong technical expertise in packaging and is responsible for developing and maintaining packaging specifications, coordinating line trials with external partners, and designing and executing testing plans to ensure successful and seamless new product launches. Primary Responsibilities · Partner cross-functionally with Marketing, Operations, Procurement, Quality, and Finance to develop and deliver new packaging solutions through external suppliers. · Ensure packaging projects meet brand objectives while balancing cost, quality, design, and functional requirements. · Manage the development, documentation, and maintenance of packaging component specifications within the designated specification system. · Establish and maintain component standards and range boards that meet brand requirements for functionality and aesthetics; oversee the organization and upkeep of the physical standards library. · Collaborate with cross-functional teams on artwork development, ensuring accuracy and compliance with packaging requirements throughout the artwork creation process. · Develop and execute testing plans for new product developments (NPDs) in partnership with third-party labs and component suppliers. · Identify, evaluate, and implement cost-saving and value engineering initiatives. · Lead and support on-site production startups, line trials, and qualifications for new packaging components and filling operations. · Maintain a strong understanding of external supplier capabilities and emerging technologies. · Stay current on packaging materials, regulatory requirements, and industry trends to ensure compliance and innovation. · Troubleshoot packaging and production issues, driving root cause analysis and corrective actions. · Support ongoing business needs, including supply continuity and stock coverage. · Provide additional support and project leadership as required. Required Qualifications · Bachelor's degree in Packaging/Plastics/Mechanical/Industrial/Chemical Engineering, or related field. · 5-10 years of proven experience in package engineering & development in consumer products, beauty, or related industry. · Experience creating packaging specifications for manufacturing. · A technical acumen with the ability to read and interpret technical drawings for components and assemblies. · Demonstrated knowledge of various manufacturing processes including extrusion blow molding, ISBM, injection molding, printing and filling. · Knowledge of various CPG packaging materials and their physical and chemical properties. · Ability to partner effectively across a diverse set of business partners and customers to deliver key results in a timely manner. · Entrepreneurial; Business owner mentality, willing to be hands-on and contribute as one team. · Ability to tackle complex problems through critical thinking. · Excellent communication skills, including spoken and written English. · Ability to travel Domestic and International up to 25%. · Strong PC skills: MS Office, PowerPoint, CAD software is a plus. People Who Thrive Here We look for people who take ownership, move with urgency, and care deeply about results. Across every level and function, success here comes from thinking like an operator; not waiting to be told what to do but seeing what needs to happen and driving it forward. The individual must be comfortable working across teams, influencing without hierarchy, and making progress even when the path isn’t perfectly defined. This is a fast-moving environment with high standards and real accountability. In return, you’ll have meaningful responsibility, autonomy to lead your work, and the opportunity to grow alongside brands, and a company, that are being actively shaped

Responsibilities: • Perform Design of Experiments (DOE) on all new tooling programs to establish the optimum molding/manufacturing process., • Create and maintain all process and/or manufacturing related documentation., • Supervise Molding Technicians and Process Engineers and assist Quality personnel with any process and/or manufacturing related issues., • Be a Leader of the Molding Department’s Continuous Improvement Team., • Participate as a member of the new program development/quoting team., • Participate as a member of the APQP Project team as it relates to Molding Tooling., • Participate in all ISO/QS/TS internal and external audits related to the Molding department., • Promote cleanliness and safety policies and procedures throughout the entire Company., • Assist in design and fabrication for new mold tooling and identify needed molding technologies (equipment/sensors) to advance capabilities. Requirements • BSME or Plastics related degree required., • At least 5 years’ experience with plastic process development of high tolerance plastic parts., • Extensive knowledge of engineering grade plastics as it relates to plastic processing., • Advanced knowledge of Mold tooling required, • Knowledge of Design of Experiments (DOE) as it relates to plastic processing., • Scientific molding expertise: Master Molder preferred, • Must possess good analytical and problem-solving skills, • Must have good written and verbal communication skills, • Must be a driven self-starter with the ability to multi-task and set priorities with little supervision, • Must be a team player with the ability to interact effectively across departments, • Must have good windows-based PC skills (Microsoft Office, Outlook, Excel, etc.), • ISO/QS/TS knowledge preferred, • Bi-Lingual (English & Spanish) a plus Equal Opportunity Employer/Veterans/Disabled Benefit offerings include medical, dental, vision, term life insurance, short-term disability insurance, additional voluntary benefits, commuter benefits and 401K plan. Our program provides employees the flexibility to choose the type of coverage that meets their individual needs. Available paid leave may include Paid Sick Leave, where required by law; any other paid leave required by Federal, State or local law; and Holiday pay upon meeting eligibility criteria. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs which are direct hire to a client To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit _ The Company will consider qualified applicants with arrest and conviction records.

Operations Manager – Corrugated Packaging Elmwood Park, NJ | $120,000–$150,000 + Benefits Full-Time | Permanent | Direct Hire Corrugated packaging manufacturing experience is essential. We are recruiting an experienced Operations Manager to lead a corrugated box manufacturing operation in Elmwood Park, NJ. You will oversee approximately 150–200 employees, drive operational improvements, develop leadership teams and implement positive cultural change across the facility. This position requires a hands-on manufacturing leader with a proven background in the corrugated box manufacturing industry. What You'll Be Doing • Lead daily corrugated packaging manufacturing operations., • Manage and develop a workforce of 150–200 employees., • Improve productivity, efficiency, quality and manufacturing performance., • Drive positive cultural change, accountability and employee engagement., • Reduce waste, downtime and operational costs., • Monitor KPIs and implement continuous improvement initiatives., • Develop production managers, supervisors and team leaders., • Work closely with maintenance, quality and production planning teams., • Maintain high standards of workplace safety and compliance. What We're Looking For Essential requirements: • Direct experience within corrugated box or corrugated packaging manufacturing., • Previous leadership experience as an Operations Manager, Plant Manager, Manufacturing Manager or senior Production Manager., • Experience managing large manufacturing teams., • Proven success improving operational performance and productivity., • Experience implementing cultural change and developing leadership teams., • Strong knowledge of manufacturing KPIs, production processes and continuous improvement., • A visible, hands-on leadership style. Desirable: • Lean Manufacturing experience., • ISO or SQF knowledge., • Experience supporting manufacturing audits and compliance. What's on Offer? • $120,000–$150,000 annual salary, • Benefits package, • Permanent, direct-hire position, • Leadership responsibility for a substantial manufacturing operation, • Opportunity to make a measurable impact on operational performance and company culture Important – Industry Experience Required We are specifically seeking candidates from the corrugated packaging / corrugated box manufacturing industry. Experience solely within general manufacturing, plastics, flexible packaging, food production, warehousing or distribution will not meet the requirements for this position. Interested? Apply with your resume, highlighting your corrugated manufacturing experience and the size of the teams you have managed. Candidates must be eligible to work and live in the USA without restriction

We are recruiting an experienced CNC Swiss Machinist / CNC Shop Manager for a growing precision machining company. This is a highly hands-on shop-floor leadership position for someone who can combine CNC Swiss machining expertise with day-to-day production leadership. The successful candidate will spend the majority of the day in the shop, working directly with machines and employees—not managing operations from an office. We are particularly interested in an experienced Swiss machinist, lead machinist, shop foreman, manufacturing supervisor, or shop manager who is comfortable setting up and operating equipment, troubleshooting machining issues, and keeping a high-mix production environment moving. CNC programming capability is highly desired. What You’ll Do: • Lead day-to-day machine shop operations while remaining actively involved on the production floor, • Set up and operate CNC Swiss screw machines to support production requirements, • Review drawings, specifications, tolerances, and job requirements before production, • Coordinate daily production schedules, machine assignments, manpower, materials, and job priorities, • Support frequent setups, short production runs, custom work, rush jobs, and changing customer requirements, • Troubleshoot machining, tooling, setup, quality, and production issues, • Program or modify CNC programs when needed, depending on experience, • Work with tooling, speeds and feeds, workholding, and machining processes to improve performance, • Perform and support first-article and in-process inspection using precision measuring equipment, • Ensure finished components meet print, tolerance, and quality requirements, • Monitor machine utilization, setup and cycle times, labor efficiency, scrap, rework, and overall shop productivity, • Identify bottlenecks and adjust production priorities to keep work flowing, • Coordinate preventive maintenance and equipment repairs to minimize downtime, • Train, develop, and provide day-to-day direction to machinists, operators, and other shop employees, • Drive improvements in setup time, cycle time, quality, throughput, and overall manufacturing efficiency Preferred Background: • Strong hands-on experience with CNC Swiss screw machining, • Experience setting up and operating Swiss-style CNC equipment, • Ability to program CNC equipment is highly desired, • Experience with CAM-based and CNC Swiss machining environments, • Strong understanding of CNC machine tools, Swiss machining processes, tooling, workholding, feeds and speeds, and machine setup, • Ability to read and interpret engineering drawings, GD&T, dimensions, tolerances, and manufacturing specifications, • Skilled with micrometers, gauges, and other precision inspection and measuring equipment, • Experience troubleshooting machining problems and refining setups and processes, • Background in a high-mix, low-volume or job-shop manufacturing environment with frequent setups is strongly preferred, • Previous experience as a Lead Machinist, Shop Foreman, Manufacturing Supervisor, Production Manager, or hands-on Shop Manager is beneficial, • Experience scheduling and prioritizing multiple jobs across machines and production resources, • Understanding of estimated versus actual machining hours, production efficiency, scrap, and job costs, • Experience machining small-diameter precision components is valuable, • Plastics machining experience is preferred but not required, • Strong shop-floor leadership and the ability to work directly alongside the production team Compensation & Benefits: • $80,000–$140,000 base salary, based on experience and technical capabilities, • Medical benefits, • 401(k) with employer matching, • Paid time off and company holidays, • Discretionary bonus opportunity, • Full-time, stable employment, • Opportunity for continued professional growth This opportunity is particularly well suited to someone who has developed strong CNC Swiss machining skills and is ready to combine those capabilities with broader responsibility for people, production, quality, scheduling, and overall shop performance. If you are a hands-on machining professional who enjoys solving problems on the shop floor and leading by example, we would welcome the opportunity to speak with you.

Home Goods Product Developer – Kitchenware Phantom Brands | New York, NY Job Type: Full-Time | In-House (On-Site) Experience Required: 3–7+ Years About Phantom Brands Phantom Brands is a dynamic and growing home goods company specializing in trend-forward, high-quality products across kitchenware, tabletop, home décor, bath, storage, and lifestyle categories. We are passionate about developing innovative, design-driven collections that combine elevated aesthetics, everyday functionality, and exceptional value for today's retail market. We are seeking an experienced, highly creative, and commercially driven Home Goods Product Developer specializing in Kitchenware to join our team in New York City. The ideal candidate has proven experience developing successful kitchenware products and collections for major brands and national retailers, with a strong understanding of materials, manufacturing, emerging trends, and commercial product development. Experience developing products for off-price retailers such as HomeGoods, TJ Maxx, Marshalls, Ross, and Burlington is highly valued. This is a fast-paced, highly creative environment where speed, strong visual aesthetics, and commercial execution go hand in hand. We are looking for someone who can identify trends, develop compelling products quickly, and consistently deliver innovative, retail-ready collections without compromising quality or design integrity. Key Responsibilities • Product Development: Lead the development of innovative, trend-forward kitchenware products from initial concept and design through sampling and production., • Kitchenware Expertise: Develop products across a wide range of categories, including cookware, bakeware, food storage, kitchen tools and gadgets, cooking utensils, cutting boards, mixing bowls, kitchen organization, and related kitchen accessories., • Collection Development: Create cohesive, commercially relevant collections incorporating coordinated colors, patterns, materials, shapes, finishes, and functional features., • Trend Research & Forecasting: Identify and interpret current and emerging trends in kitchenware, cooking, color, materials, patterns, textures, finishes, and consumer preferences., • AI-Assisted Product Development: Utilize AI-powered creative tools to accelerate product ideation, generate realistic product visualizations, explore design variations, and streamline the overall development process., • Material & Manufacturing Knowledge: Apply a strong understanding of materials, finishes, manufacturing processes, and product construction to develop aesthetically compelling, functional, and production-feasible kitchenware., • Retail & Market Research: Analyze competitive products, pricing, assortments, and design trends across major retailers to identify opportunities for new product development., • Cost-Effective Product Development: Collaborate with sourcing and production teams to develop products that meet competitive target costs and retail price points while maintaining strong aesthetics, functionality, and quality., • Product Specifications: Prepare detailed product development packages, including dimensions, materials, colors, Pantone references, patterns, finishes, artwork placement, and manufacturing specifications., • Sampling & Product Refinement: Review product samples, communicate revisions, refine design details, and ensure finished products accurately reflect approved concepts., • Factory Collaboration: Work closely with overseas manufacturers and internal production teams to ensure designs are technically feasible, cost-effective, and aligned with manufacturing capabilities., • Cross-Functional Collaboration: Partner with design, merchandising, sales, sourcing, and production teams to develop collections that align with retailer needs and business objectives., • Fast-Paced Execution: Manage multiple kitchenware collections and development projects simultaneously while meeting tight deadlines and responding quickly to evolving market demands. Qualifications & Requirements • Minimum 3 years of professional experience, ideally 3–7+ years, specifically in kitchenware and hard goods product development., • Proven experience creating and developing successful kitchenware products or collections for major brands, national retailers, or established home goods companies., • Strong portfolio demonstrating original product development, successful collections, commercial relevance, and exceptional visual aesthetics., • Demonstrated design range, with the ability to develop products across multiple aesthetics, styles, seasonal themes, consumer demographics, and retail price points., • Strong understanding of current and emerging trends in kitchenware, cooking, kitchen organization, color, materials, patterns, shapes, and finishes., • In-depth knowledge of kitchenware materials, including stainless steel, aluminum, cast iron, ceramic, glass, silicone, wood, bamboo, plastics, and other relevant materials., • Understanding of manufacturing techniques such as injection molding, die casting, stamping, coating, glazing, embossing, printing, and various surface treatments and finishes., • Knowledge of product functionality, durability, food-contact material considerations, manufacturing limitations, and applicable safety and quality requirements., • Experience developing coordinated kitchenware collections, including the ability to translate prints, patterns, colors, and design concepts across multiple product forms., • Experience taking products from initial concept through design development, sampling, costing, and mass production., • Comfortable using AI tools as part of the creative product development process to support concept generation, product visualization, design exploration, and faster execution., • Proficiency in Adobe Creative Suite, particularly Photoshop and Illustrator, along with relevant design and visualization tools., • Ability to create compelling product renderings, presentations, mood boards, and detailed product specifications., • Strong commercial awareness, including competitive retail pricing, product positioning, perceived value, and consumer purchasing behavior., • Experience developing products for major off-price retailers, including TJ Maxx, Marshalls, HomeGoods, Ross, and Burlington, is a strong plus., • Excellent organizational skills, attention to detail, and the ability to manage multiple projects under demanding deadlines., • Strong communication skills and the ability to collaborate effectively with internal teams and overseas manufacturing partners., • Existing relationships with factories and manufacturers in China are a plus, but not required. Ideal Candidate We are looking for a product developer who combines exceptional creative instincts with strong technical knowledge and commercial awareness. The ideal candidate has a refined visual aesthetic, a strong understanding of kitchenware manufacturing, and the ability to translate emerging trends into unique, functional, and commercially successful products. They should understand how to develop cohesive collections while recognizing the importance of individual product details, including shape, proportion, color, material, texture, finish, ergonomics, and functionality. This individual must be versatile in their design approach, comfortable working across a broad range of kitchenware categories, and knowledgeable about how different materials and manufacturing processes affect the appearance, quality, performance, cost, and feasibility of a product. We value developers who understand what makes a product visually compelling, what makes it functional, what makes it commercially successful, and how to bring it to market efficiently. Speed and creativity are equally important in this role. The right candidate thrives in a fast-moving environment, is comfortable incorporating AI and modern design tools into their workflow, adapts quickly to changing creative direction, and consistently produces high-quality work within tight timelines. Above all, we are looking for someone who is proactive, resourceful, highly motivated, and passionate about developing beautiful, innovative kitchenware collections that stand out in the retail marketplace. Position Details Location: New York City, NY Schedule: Full-Time, Monday–Friday Work Arrangement: 100% In-House / On-Site (Not Remote or Hybrid) Experience: Minimum 3 Years; 3–7+ Years Preferred Specialization: Kitchenware Product Design & Development Join Our Team At Phantom Brands, you will have the opportunity to help shape exciting, trend-forward kitchenware collections developed for major retail markets. We offer a creative, collaborative, and fast-paced environment where innovative thinking, strong design instincts, technical expertise, and the ability to execute quickly are valued. We are looking for an experienced product developer who brings fresh ideas, a sophisticated visual perspective, and the expertise needed to turn creative concepts into successful, functional, and retail-ready products. How to Apply Interested candidates should email their resume and portfolio directly to the Creative Director at alicia@phantomchef.com to be considered for this position. Please include examples of kitchenware products or collections you have personally designed or developed. Applications should demonstrate: • Successful kitchenware products or collections developed for major brands or retailers., • Strong design range across multiple kitchenware categories, materials, and aesthetics., • Experience developing cohesive collections with coordinated colors, patterns, shapes, and finishes., • Understanding of product functionality, construction, materials, manufacturing processes, and commercial costing., • Ability to identify and translate emerging trends into market-ready products., • Experience incorporating AI and modern creative tools into the product development process. A portfolio or documented examples of successfully developed products are required to be considered for this position.

Are you passionate about fitness and outdoor wellness? KOMPAN U.S. is looking for a Fitness - Direct Sales Representative to champion our cutting-edge outdoor fitness equipment. In this role, you’ll serve as a trusted advisor and sales expert, driving strategic projects ranging from $10,000 to over $1 million. You'll build strong relationships, generate demand, and help shape healthier, more active communities. This is a unique opportunity to make a real impact while joining a company that values innovation, collaboration, and purpose-driven growth. Who We Are For more than 50 years, KOMPAN has researched, designed, and built innovative and imaginative commercial playground equipment and outdoor fitness equipment that captivate all ages and abilities. As a global leader with an organizational focus on people, passion, progress, and performance, our mission is to support happier and healthier communities. In collaboration with our global headquarters in Denmark, KOMPAN designs, manufactures, and installs more than 1,000 sites a month across 90 different countries. Our North American headquarters, located in Austin, Texas, supports field sales around the U.S. and Canada. At KOMPAN, we take pride in our commitment to the global environment. We exceed sustainability efforts and make it possible to lower carbon emissions by utilizing recycled ocean waste, consumer-recycled plastics, and textile wastes to create playgrounds that are born green, or made green. We offer our sales representatives a base salary, uncapped commissions, and amazing benefits - not to mention, the opportunity to work with a passionate team of people who make a direct impact on the communities where we live and work. What You’ll Do • Sell and promote KOMPAN outdoor fitness equipment to industry targets in your region, becoming an expert in design and functionality, • Prospect, network, and build a pipeline through activity-based sales, • Leverage the CRM by targeting market segments (e.g., higher education, schools, multi-family & housing, emergency services, leisure, contractors, and developers, specification – architects, landscape architects & engineers), • Create product awareness and demand by articulating the world-class quality of KOMPAN equipment through presentations and industry events, • Prepare sales quotations and basic designs with the assistance of our highly supportive, multi-disciplinary, and centralized resource teams, • Ensure quality communication with your customers throughout the sales process, from the design phase through installation and post-sale What You’ll Need • College degree preferred, • Experience in long sales cycles and solution selling is preferred, • Demonstrated knowledge of managing a CRM system is preferred, • Strong presentation and communication skills, • Excellent organizational, time-management, and project-management capabilities, • High degree of integrity and professionalism Perks and Benefits • Base salary + uncapped commissions, • Comprehensive medical, vision, and dental plans, • Employer-paid life and disability insurance, • 401(k) retirement plan with company match, • Paid parental leave, • Competitive PTO and robust holiday schedule, • Home office equipment, • Mileage reimbursement, • Professional development, including a trip to Austin, TX for our new sales representatives to attend KOMPAN 101 (enjoy time with your new colleagues and explore nearby KOMPAN sites!) KOMPAN is an Equal Employment Opportunity and Affirmative Action Employer. We do not discriminate based upon race, religion, color, national origin, gender, age, veteran status, or any other basis covered by appropriate law. We celebrate diversity and are committed to creating an inclusive environment for all our employees. All employment is based on qualifications, merit, and business needs.

Chief Operating Officer (COO) — Blue Standard Inc. Location: New York / New Jersey Work Structure: Primarily in-person, with regular presence at our Manhattan office and New Jersey production operations Travel: Regular international travel, particularly to Austria, Germany, and Hungary Reports to: CEO Compensation: $200,000–$260,000 base salary + performance bonus + equity - Depending on Experience About Blue Standard Inc. Blue Standard Inc. is a rapidly growing material science and manufacturing company developing and commercializing innovative, plant-based material systems for consumer products. We work with major brands and manufacturing partners across the United States and Europe and are entering an important new stage of growth: scaling our European manufacturing platform while establishing production in New Jersey. We are looking for a Chief Operating Officer who can help transform a fast-moving, entrepreneurial organization into a highly organized, scalable international operating company. This is not a role focused on maintaining existing systems. It is a role for someone who wants to build them. The Opportunity The COO will work directly with the CEO and leadership team to develop the operational infrastructure required to support Blue Standard's next stage of growth. A major focus of the position will be creating seamless operating systems between our U.S. and European organizations while helping establish and scale manufacturing in New Jersey. The COO will coordinate operations across our Manhattan headquarters, New Jersey production operations, and European manufacturing network. The successful candidate will be equally comfortable developing an operating strategy with senior leadership and spending time on the production floor understanding how products are actually being manufactured. Core Responsibilities Global Operations • Create an integrated operating structure across Blue Standard's U.S. and European businesses., • Establish clear responsibilities, decision-making processes, reporting structures, and accountability across regions., • Improve communication and coordination between U.S. leadership and European manufacturing operations., • Translate company strategy into measurable operating plans and execution. U.S. Manufacturing Expansion • Play a leadership role in establishing and scaling Blue Standard production in New Jersey., • Maintain a regular on-site presence at New Jersey production operations., • Coordinate equipment installation, production ramp-up, staffing, capacity planning, suppliers, and production systems., • Ensure knowledge and manufacturing processes developed in Europe are successfully transferred to U.S. production., • Develop repeatable manufacturing processes capable of supporting significant future growth. European & International Operations • Work closely with production teams and manufacturing partners in Austria, Germany, and Hungary., • Establish consistent operating processes across international entities., • Coordinate production planning, procurement, inventory, logistics, forecasting, and customer requirements across regions., • Travel regularly to European operations, particularly during the initial integration and scale-up period. Systems & ERP • Lead implementation and adoption of company-wide ERP and operating systems., • Establish reliable systems for purchasing, inventory, production planning, logistics, forecasting, and reporting., • Reduce reliance on disconnected spreadsheets, emails, and institutional knowledge., • Create scalable processes that allow the company to continue growing without adding unnecessary complexity. Production & Supply Chain • Develop company-wide production planning and capacity management., • Implement demand forecasting and S&OP processes., • Improve supplier management, purchasing, inventory levels, logistics, and working capital., • Establish operational redundancy and business continuity planning., • Develop processes for managing co-manufacturers and strategic production partners. Operational Excellence • Establish and monitor KPIs including:, • Production throughput, • Capacity utilization, • Cycle time, • Scrap and yield, • On-time delivery, • Inventory, • COGS, • Gross margin, • Working capital, • Forecast accuracy, • Identify opportunities to improve manufacturing economics, productivity, and margins., • Develop a culture of continuous improvement across the organization. Organization & Leadership • Build and develop the operations organization required to support Blue Standard's growth., • Establish clear responsibilities throughout manufacturing, logistics, procurement, and operations., • Develop a consistent operating cadence including weekly operations reviews and monthly business reviews., • Work closely with Finance, R&D, Commercial, and executive leadership. What We're Looking For We are looking for an experienced operational leader who has helped build and scale manufacturing organizations, rather than someone whose experience is limited to managing mature corporate infrastructure. Strong candidates will likely have: • 12+ years of experience in manufacturing, operations, supply chain, or industrial businesses., • Significant leadership experience at the VP, SVP, GM, President, or COO level., • Experience scaling manufacturing operations., • Experience operating within international or multi-entity organizations., • Experience connecting U.S. and European operations is highly desirable., • Demonstrated experience implementing ERP, MRP, or enterprise operating systems., • Strong understanding of manufacturing economics, inventory, supply chain, procurement, logistics, and working capital., • Experience managing contract manufacturers or external production partners., • Experience establishing new manufacturing facilities or production lines., • Strong financial and analytical capabilities., • Ability to operate effectively in a high-growth entrepreneurial environment. Experience with injection molding, polymers, plastics, material science, consumer products, industrial manufacturing, or related manufacturing technologies would be particularly valuable. The Type of Leader Who Will Succeed Here We are looking for someone who is: • A builder, not simply an administrator. Taking ownership is KEY., • Comfortable moving between executive strategy and factory-floor execution., • Highly organized without creating unnecessary bureaucracy., • Capable of turning institutional knowledge into documented, repeatable processes., • Financially disciplined and data-driven., • Comfortable working across different cultures, countries, and operating environments., • Naturally accountable and able to create accountability throughout an organization., • Willing to challenge existing processes when there is a better way to operate., • Excited by the opportunity to help build the operating platform of a rapidly scaling manufacturing company. Location & Travel This position will be based in the New York / New Jersey area. The COO will divide time between: • Blue Standard's Manhattan office, • New Jersey manufacturing operations, • International production operations and partners, primarily in Austria, Germany, and Hungary This is not intended to be a remote position. We believe the person responsible for building our manufacturing and operating infrastructure needs meaningful direct engagement with both our leadership team and production operations. International travel will be significant during the initial integration and scale-up period and will remain an ongoing component of the position. Compensation Blue Standard expects to offer: Base Salary: $200,000–$260,000 depending on experience Annual Performance Bonus: Target approximately 20% Equity: Equity participation based on experience and fit Benefits: Competitive executive benefits package For an exceptional candidate with particularly relevant international manufacturing and scale-up experience, compensation may be adjusted accordingly. Why Blue Standard This is an opportunity to join Blue Standard at an important inflection point. The company has already developed its technology, established international production, built meaningful commercial relationships, and demonstrated significant market demand. The next challenge is operational scale. The person joining as COO will have an opportunity to help design the systems, organization, manufacturing infrastructure, and operating discipline that support the company for the next decade. • We are looking for someone who wants to build that platform with us.

Home Goods Product Developer – Off-Price Retail Phantom Brands | New York, NY Job Type: Full-Time | In-House (On-Site) Experience Required: 3–7+ Years About Phantom Brands Phantom Brands is a dynamic and growing home goods company specializing in trend-forward, high-quality products across home décor, kitchenware, tabletop, bath and cleaning accessories, storage, bedding, textiles, and lifestyle categories. We are passionate about developing innovative, design-driven products that combine elevated aesthetics, everyday functionality, and exceptional value for today's retail market. We are seeking an experienced, highly creative, and commercially driven Home Goods Product Developer with a strong background in the off-price retail market to join our team in New York City. The ideal candidate has proven experience developing successful home goods products and collections for major off-price retailers, such as TJ Maxx, Marshalls, HomeGoods, Ross, and Burlington. They must understand the unique demands of the off-price market, including competitive pricing, fast product turnaround, trend-driven assortments, and delivering exceptional perceived value. This is a fast-paced environment where speed, strong visual aesthetics, commercial awareness, and execution go hand in hand. We are looking for someone who can identify opportunities, develop compelling products quickly, and consistently deliver collections that are both visually appealing and commercially successful. Key Responsibilities • Product Development: Lead the development of innovative, trend-forward home goods products and collections from initial concept through sampling and production., • Off-Price Retail Expertise: Develop products specifically suited to the off-price retail market, with a strong understanding of retailer expectations, target price points, customer preferences, and assortment strategies., • Collection Development: Create cohesive, commercially relevant collections across multiple home goods categories, including home décor, kitchenware, tabletop, bath accessories, storage, bedding, textiles, seasonal products, and more., • Trend Research & Forecasting: Identify and interpret current and emerging trends in home goods, interior design, color, materials, patterns, finishes, and consumer buying behavior., • Competitive Market Research: Regularly analyze products, pricing, assortments, and design trends across major off-price retailers to identify opportunities for new product development., • Design & Creative Direction: Develop product concepts, mood boards, color palettes, material selections, and collection presentations that reflect current trends and strong retail appeal., • AI-Assisted Product Development: Utilize AI-powered creative tools to accelerate product ideation, generate visual concepts, explore design variations, and streamline the product development process., • Cost-Effective Product Development: Work closely with sourcing and production teams to develop products that achieve competitive retail price points while maintaining quality, functionality, and elevated design., • Material & Manufacturing Knowledge: Apply a strong understanding of materials, finishes, construction techniques, and manufacturing capabilities to ensure products are both visually compelling and commercially feasible., • Vendor & Factory Collaboration: Communicate product specifications, design revisions, materials, and development requirements to overseas factories and manufacturing partners., • Sampling & Product Refinement: Review and evaluate product samples, recommend improvements, and ensure final products meet approved design, quality, and cost expectations., • Cross-Functional Collaboration: Partner with design, merchandising, sales, sourcing, and production teams to develop products that align with retailer needs and business objectives., • Fast-Paced Execution: Manage multiple product categories, collections, and development projects simultaneously while meeting tight deadlines and responding quickly to changing market demands. Qualifications & Requirements • Minimum 3 years of professional experience, ideally 3–7+ years, in home goods product development, with direct experience developing products for the off-price retail market., • Proven experience developing successful products or collections for major off-price retailers, including TJ Maxx, Marshalls, HomeGoods, Ross, Burlington, or similar retail accounts., • Strong understanding of the off-price retail business model, including competitive costing, retail price architecture, product value, assortment planning, and fast product development cycles., • Experience developing products across multiple home goods categories, including home décor, kitchenware, tabletop, bath and cleaning accessories, storage, bedding, textiles, and seasonal merchandise., • A strong portfolio or proven track record demonstrating successful product development, creative versatility, and commercial relevance., • Demonstrated design range with the ability to develop products across different aesthetics, styles, consumer demographics, and retail price points., • Strong understanding of current and emerging trends in home goods, interior design, color, materials, patterns, and finishes., • Knowledge of materials such as ceramic, glass, wood, metal, resin, plastics, textiles, and other commonly used home goods materials, including manufacturing applications and cost considerations., • Experience working with overseas manufacturers and understanding the product development process from concept through sampling and mass production., • Ability to balance strong product aesthetics with competitive costing, quality expectations, and retailer-specific requirements., • Comfortable using AI tools in the product development process to support concept creation, product visualization, design exploration, and faster execution., • Proficiency in Adobe Creative Suite, particularly Photoshop and Illustrator, and familiarity with relevant product design and presentation tools., • Strong understanding of merchandising, product positioning, market trends, and consumer purchasing behavior., • Excellent organizational skills, attention to detail, and the ability to manage multiple projects under tight deadlines., • Strong communication, problem-solving, and collaboration skills., • Existing relationships with factories and manufacturers in China are a plus, but not required. Ideal Candidate We are looking for a product developer who understands what sells, why it sells, and how to develop it at the right price. The ideal candidate has a strong creative eye, excellent commercial instincts, and hands-on experience developing successful products for major off-price retailers. They understand how to translate current and emerging trends into compelling home goods collections that deliver exceptional perceived value while meeting aggressive retail price points. This individual should have a strong understanding of materials, manufacturing processes, product construction, and costing. They must be able to identify opportunities in the marketplace, develop fresh product concepts, and adapt designs to meet the specific needs of off-price retail customers. We value individuals who demonstrate versatility, originality, and the ability to work across multiple home goods categories and design aesthetics. Speed, creativity, and commercial execution are equally important in this role. The right candidate thrives in a fast-moving environment, is comfortable incorporating AI and modern creative tools into their workflow, and can consistently develop high-quality, retail-ready products within demanding timelines. Above all, we are looking for someone who is proactive, resourceful, highly motivated, and passionate about developing products that stand out on the retail floor. Position Details Location: New York City, NY Schedule: Full-Time, Monday–Friday Work Arrangement: 100% In-House / On-Site (Not Remote or Hybrid) Experience: Minimum 3 Years; 3–7+ Years Preferred Specialization: Home Goods Product Development / Off-Price Retail Join Our Team At Phantom Brands, you will have the opportunity to develop exciting, trend-forward home goods collections for some of the country's leading retail markets. We offer a creative, collaborative, and fast-paced environment where strong product instincts, innovative thinking, and the ability to execute quickly are essential. We are looking for an experienced product developer who understands the off-price retail landscape, brings fresh ideas and a strong visual perspective, and has the expertise to turn creative concepts into successful, commercially viable products. How to Apply Please submit your resume and portfolio, including examples of home goods products and collections you have personally developed. You can also email your resumes and portfolio to the Phantom Creative Director at: alicia@phantomchef.com Applications should demonstrate: • Experience developing home goods products for major off-price retailers., • Successful products or collections brought to market., • Strong design range across multiple home goods categories and aesthetics., • Understanding of retail price points, product costing, materials, and manufacturing., • Ability to identify and translate emerging trends into commercially successful products., • Experience using AI and modern creative tools to support product development. A portfolio or documented examples of successfully developed products are required to be considered for this position. Phantom Brands is an Equal Opportunity Employer. We welcome qualified applicants from all backgrounds.

Plastics Engineer – Mid-Level to Senior Blue Standard Inc. United States | Full-Time Anticipated Start: Late November 2026 Compensation: $120,000–$160,000+ depending on experience, plus benefits and equity About Blue Standard Inc. Blue Standard Inc. is a material science and advanced manufacturing company developing and commercializing next-generation materials and products designed to reduce reliance on conventional persistent plastics. With operations and technical partners across the United States and Europe, Blue Standard works across material development, injection molding, product engineering, manufacturing, sustainability, and commercialization. As we expand manufacturing into the United States, we are looking for an exceptional Plastics Engineer to become a key technical member of our organization and help build our U.S. manufacturing platform from the ground up. The Opportunity This is not a traditional plastics engineering position. We are looking for a mid-level to senior engineer who wants to combine hands-on manufacturing engineering with material science, process development, quality systems, R&D, sustainability, testing, regulatory work, and commercialization. A major initial responsibility will be transferring manufacturing and process knowledge from Blue Standard's established European production operations into our developing U.S. manufacturing platform. The selected engineer will spend approximately 1 to 2 months working directly with our production and technical teams in Austria and Hungary, with international travel, accommodations, and reasonable business expenses paid by Blue Standard. The objective is to deeply understand our materials, processing methods, tooling, equipment, quality systems, and manufacturing know-how—and then help us implement, improve, document, and scale those systems in the United States. This role will maintain an ongoing technical relationship with our European engineering and production teams. We are looking for someone who will not simply replicate existing processes, but continually ideate, experiment, improve, and optimize them. What You'll Work OnU.S. Manufacturing & Process Engineering You will play a central role in developing Blue Standard's U.S. production capabilities, including: • Developing and implementing production systems and manufacturing processes, • Supporting installation, commissioning, and optimization of injection molding equipment, • Translating European manufacturing processes into scalable U.S. production systems, • Developing standard operating procedures and technical documentation, • Optimizing cycle times, yields, consistency, material utilization, and production efficiency, • Troubleshooting molding, tooling, material, and equipment issues, • Supporting tooling development and design-for-manufacturing reviews, • Evaluating automation and manufacturing-efficiency opportunities, • Developing production metrics and process-control systems, • Working closely with European technical teams on continuous process improvement Quality Systems You will help build the quality infrastructure required to support a growing advanced-manufacturing organization, including: • Quality-control and quality-assurance systems, • Incoming raw-material specifications, • In-process quality controls, • Finished-product testing and inspection, • Production tolerances and acceptance criteria, • Process documentation, • Traceability systems, • Corrective and preventive action procedures, • Customer-specific quality requirements Materials, Testing, Certification & Regulatory This role will become an important internal technical resource for Blue Standard's growing materials platform. Responsibilities will include: • Developing third-party testing protocols for materials and finished products, • Coordinating testing with qualified external laboratories, • Managing relationships with testing and certification organizations, • Supporting material and product certifications, • Maintaining technical and regulatory documentation, • Evaluating applicable U.S. and international regulatory requirements, • Developing testing programs for new materials and applications, • Supporting technical responses to customers and regulatory organizationsLCA & Sustainability You will also help expand Blue Standard's capabilities around environmental performance and sustainability measurement. This may include: • Supporting development and maintenance of Life Cycle Assessments (LCAs), • Working with third-party LCA specialists, • Collecting and validating manufacturing, energy, transportation, and material data, • Supporting carbon-footprint analysis, • Developing technical support for environmental and sustainability claims, • Helping customers understand the environmental implications of material and manufacturing choices Research & Development R&D will be an important component of the position. You will work with internal and external technical teams to: • Evaluate new materials and formulations, • Improve existing materials, • Develop new manufacturing processes, • Test processing parameters, • Investigate material and product performance, • Develop new applications, • Improve manufacturability and production efficiency, • Support cost-reduction initiatives, • Move successful R&D projects from laboratory and pilot work into commercial production Universities & Research Partnerships Blue Standard intends to build meaningful relationships with universities and research institutions in the United States. The Plastics Engineer will help: • Identify leading polymer, plastics, material science, sustainability, and manufacturing laboratories, • Establish university research relationships, • Coordinate external testing and research programs, • Develop sponsored research opportunities, • Work with professors, researchers, laboratories, and technical institutions, • Develop potential internship and engineering-talent pipelinesGrants & Government Programs The position will also support Blue Standard's participation in relevant government and non-dilutive funding programs. This may include: • Identifying federal and state grant opportunities, • Writing and supporting technical sections of grant applications, • Developing technical project scopes, • Providing engineering and manufacturing data, • Supporting applications involving advanced manufacturing, sustainable materials, domestic production, material science, and circular-economy technologies, • Coordinating with outside grant and government-program specialists Customer Technical & Sustainability Support As our materials platform expands, our customers increasingly rely on Blue Standard for technical guidance. You may participate directly with customers on: • Material selection, • Product development, • Manufacturing feasibility, • Design for manufacturing, • Testing and certification, • Sustainability strategy, • Material performance, • Manufacturing troubleshooting, • Commercialization This is a technical and consultative responsibility rather than a traditional sales role. European Training & International Collaboration International collaboration is an important part of this position. The selected engineer should be comfortable spending approximately 1 to 2 months in Austria and Hungary during the initial development of the role. Blue Standard will cover reasonable and approved expenses associated with required international business travel. Following the initial training period, the engineer will maintain regular communication and technical collaboration with our European production and R&D teams. International travel will remain an ongoing component of the position as appropriate. U.S. Location & Future Relocation The position will initially be U.S.-based, with our U.S. production operation expected to be located in the North East Region / NY/NJ area. Who We're Looking For We are interested in engineers with backgrounds in: • Plastics Engineering, • Polymer Engineering, • Materials Science or Materials Engineering, • Mechanical Engineering with significant plastics experience, • Chemical Engineering with significant polymer/process experience, • Manufacturing or Process Engineering focused on plastics Ideal candidates will have meaningful hands-on experience with injection molding and plastics processing. Experience in several of the following areas is strongly preferred: • Injection molding process development, • Polymer and material behavior, • Mold and tooling development, • Process troubleshooting, • Manufacturing scale-up, • Production equipment commissioning, • Quality systems, • Design for manufacturing, • Material testing, • Product commercialization, • Sustainable or bio-based materials, • R&D and new-material development, • Technical documentation, • Regulatory or certification programs Most importantly, we are looking for someone who is technically curious, hands-on, comfortable working across disciplines, and interested in helping build—not simply operate—an advanced manufacturing organization. Compensation & Benefits Compensation will depend on experience and the scope of the final role. Expected base salary: $100,000–$160,000+ / based on experience The overall compensation package is expected to include: • Competitive base salary, • Performance-based bonus opportunity, • Equity participation, • Employee benefits, • 15 days paid time off, • Company holidays, • 401(k) with 100% Company match up to 3% of salary, subject to plan terms, • Company-paid required international business travel, • Reasonable future relocation assistance Why Blue Standard? This is an opportunity to join Blue Standard at a point where an engineer can have a significant influence on how our technical and manufacturing organization is built. You will have the opportunity to work across: Material Science | R&D | Injection Molding | Manufacturing | Quality | Sustainability | Regulatory | Testing | University Research | Commercialization You will work directly with company leadership, production teams, researchers, external laboratories, customers, and international manufacturing partners. • Blue Standard Inc. is an equal opportunity employer.

Job Description About Us Earthbound is the industry's most experienced, trusted, and respected brand licensing and product design company, with a passion for creating a competitive edge through the evolution and expansion of brands. Our seasoned, innovative, and agile capabilities deliver superior results while maintaining our uncompromising values which place people first, embrace change, and act with humility and integrity. For more information, please visit www.earthboundbrands.com. Our office is located in the Flatiron District, NYC and we are currently operating on a hybrid schedule, in office Monday through Wednesday and remote on Thursday and Friday. About the Role This is a hands-on design role with a strong supplier co-creation focus. You'll be the primary designer and be responsible for creating brand-right, trend forward, and saleable hard kitchen products for multiple Walmart private label home brands, then partner closely with suppliers to bring that vision to life. You'd work closely with the Design Director and give your input on trends, concept, and aesthetic evolution for the brands and products you work on. Your time will be split roughly 50/50. Half is original design created in house and the other half is supplier co-creation: giving clear design direction, reviewing samples and renderings, and making sure every piece lands on-brand, on-trend and on-cost. Both halves are always in service of commercial, manufacturable product. You'll work hand in hand with the Product Development team in Bentonville and with the Walmart merchant and cross functional teams, partnering in all line reviews and alignment meetings. You'll be expected to know your market: tracking the competitive landscape, reading sales data, and proposing forward-thinking but brand-appropriate innovation. As workload ebbs and flows, this designer may also support kitchen textiles and the broader home team. This role reports to the Design Director. What You'll Do • Design original product for hard kitchen categories, including dinnerware, hard tabletop, drinkware, serve-ware, food storage and pantry org, from concept through production-ready artwork and design specs., • Co-create with suppliers: share design direction, brainstorm on materials and processes, and build products together that meet design intent, cost targets and manufacturing realities., • Review and redline supplier submissions - concepts, CADs, renderings, strike-offs and physical samples with specific feedback on form, proportion, color, decoration, materials, finish and function., • Partner closely with the Product Development team in Bentonville to understand category needs, merchant strategy, execute against design briefs, and keep timelines on track., • Represent design in alignment meetings and line reviews with the Walmart team, presenting concepts, collections and rationale clearly and confidently., • Work with the Design Director, Product Development and sourcing partners to troubleshoot product and design issues, balancing design intent against cost, manufacturing, food-safety and packaging requirements., • Partner with peers to keep brand continuity across multiple Walmart private label home brands, including coordination with kitchen textiles for a cohesive kitchen story., • Monitor the competitive landscape, analyze sales data, and research new materials, finishes, decoration techniques and innovations in housewares. Use what you learn to drive proactive design proposals., • Build trend and concept boards, line plans, spec sheets and presentation decks., • Support kitchen textiles and other home categories as needed. Who You Are • A kitchen person first: you understand how hard kitchen product is made, what it costs, and what makes it sell at mass-market price points., • Equally comfortable designing yourself and guiding a supplier's design team toward a better result., • A strong communicator who can explain design intent precisely - in a deck, in a markup, or on a call with a factory halfway around the world., • Passionate about design and style, with a sharp eye for what's brand-right versus merely trendy., • Proactive and innovation-minded; you bring workable ideas to the table without being asked., • Highly organized, detail-obsessed, and diligent about follow-up with internal teams, Walmart partners and suppliers., • Adaptable and open to change; you study both wins and misses for clues to improvement. Qualifications • Bachelor's degree in Industrial Design, Product Design, Ceramics, Surface or Textile Design, or a related field., • 4-7 years of professional experience designing hard kitchen or housewares product that has been manufactured and sold at retail. Your portfolio should show produced product, not just concepts., • Hands-on experience in tabletop, food storage and/or decorative kitchenware is strongly preferred., • Working knowledge of hard kitchen materials and processes, such as stoneware, porcelain, glass, melamine, plastics, stainless steel, wood and bamboo, and decoration methods like decals, glazes, printing and embossing., • Awareness of food-contact safety, packaging and set-building realities in mass-market retail., • Experience collaborating with suppliers or manufacturers through development; direct experience with overseas factories is a plus., • Experience with kitchen textiles (towels, oven mitts, aprons, table linens) is a plus., • Experience working with or presenting to a major retail partner such as Walmart is a plus., • Proficiency in Adobe Illustrator and Photoshop for design and artwork, and PowerPoint for presentations. InDesign is a plus., • 3D modeling and rendering skills (Rhino, SolidWorks or KeyShot) are a strong plus., • Willingness to travel occasionally to Bentonville, supplier factories and trade shows.

Job Description We’re looking for a skilled and dependable Freelance Scenic Carpenter to join our team. This person will help bring scenic designs to life by constructing, assembling, modifying, and installing theatrical, event, film, television, or themed-environment scenery. The ideal candidate is comfortable working from drawings and plans, has strong carpentry skills, pays close attention to detail, and enjoys working creatively in a fast-paced production environment. Responsibilities • Build, assemble, and install scenic elements, structures, platforms, walls, flats, and specialty pieces., • Read and interpret scenic drawings, plans, elevations, and construction documents., • Use hand tools, power tools, and shop equipment safely and effectively., • Work with materials such as lumber, plywood, MDF, foam, plastics, and other scenic materials., • Modify or repair scenery as projects develop., • Collaborate with scenic artists, designers, fabricators, stage crews, and production staff., • Maintain a clean, organized, and safe work area., • Meet production deadlines while maintaining quality and craftsmanship., • Assist with load-ins, installations, strikes, and occasional on-site work as needed. Qualifications • Previous carpentry, scenic fabrication, theatrical, film/TV, events, or related experience preferred., • Ability to read construction drawings and measurements., • Proficiency with common hand and power tools., • Strong attention to detail and problem-solving skills., • Ability to work independently as well as part of a team., • Ability to safely lift and move materials and work on your feet for extended periods., • OSHA/safety training or relevant certifications are a plus. Entry-level candidates with strong carpentry skills and a willingness to learn are encouraged to apply. What We Offer • [Competitive hourly pay], • [Overtime opportunities], • [Benefits, if applicable], • [Paid time off, if applicable], • Hands-on work on unique and creative projects, • A collaborative production environment How to Apply Please submit your resume and a brief description of your carpentry/scenic experience. A portfolio or photos of previous work are welcome but not required. \nCompany Description Founded in 1993, Kadan Productions is a full-service production company that specializes in fashion shows and events. We cater to a wide range of clients and work to create the best experience possible in the events industry. KadaN's facilities include a design/production office adjacent to a 80,000 square foot shop. Our facility is fully equipped for woodworking and cabinetry, metal working, upholstering, and scenic painting/faux finish paint treatments. Our facility also houses an extensive rental stock for your event needs. *Be sure your resume file is named with your last name and first name. *Your resume (not including a portfolio) should be TWO pages or less. More than 2 page will not be looked at. Founded in 1993, Kadan Productions is a full-service production company that specializes in fashion shows and events. We cater to a wide range of clients and work to create the best experience possible in the events industry. \r\nKadaN's facilities include a design/production office adjacent to a 80,000 square foot shop. Our facility is fully equipped for woodworking and cabinetry, metal working, upholstering, and scenic painting/faux finish paint treatments. Our facility also houses an extensive rental stock for your event needs.\r\nBe sure your resume file is named with your last name and first name.\r\nYour resume (not including a portfolio) should be TWO pages or less. More than 2 page will not be looked at.

Job Description Thermo Plastics is a leading manufacturer in the plastics industry, known for quality, innovation, and reliability. We are currently seeking a skilled Machine Maintenance Mechanic/Vacforming/Thermo Forming machine set up to join our maintenance team and help keep our production running smoothly. Responsibilities: Troubleshoot, maintain, and repair plastic processing machinery and equipment Perform preventative maintenance on machines to ensure optimal performance Assist with equipment setup, changeovers, and calibration Maintain maintenance logs and records Ensure safety standards are followed at all times Requirements: Mechanical experience in an industrial or manufacturing setting Familiarity with plastic processing equipment is a plus Strong problem-solving skills Ability to work independently and as part of a team Must be reliable and safety-conscious

Job Description Freedom Plastics Operator's Job Description and Function Form Job Title: Maintenance Operator Position Overview: Maintain extrusion equipment that is used in the production of custom made polyethylene film, and various bag making machines that are used in the production of custom made polyethylene bags. Also, any and all other equipment that is in, on, or part of the building. Essential Job Functions : • Perform preventative maintenance on all equipment., • Make necessary repairs to equipment., • Document all work that is done., • Follow all procedures in place, and your supervisor., • Use: lock out / tag out procedure, whenever working on a piece of equipment., • Maintain clean work areas., • Perform other related duties as assigned. Requirements: • High School Diploma or Equivalent., • Citizenship or proof of residency., • Have at least 2 years experience., • Wear clean and appropriate clothing and shoes., • Wash hands well., • Come to work on time, ready to start at designated time.

Job Description Job Title: Maintenance Mechanic – Plastics Manufacturing (Brooklyn) Compensation: Good pay (based on experience) + room to grow Job Type: Full-Time We are a local manufacturing plant looking for a reliable, skilled Maintenance Mechanic to keep our production machinery running smoothly. Responsibilities: Fix: Troubleshoot and repair mechanical, electrical, and troubleshoot machine issues. Maintain: Perform routine preventative maintenance to minimize downtime. Build: Help assemble, modify, and install machinery and production lines. Requirements: Experience as an industrial mechanic or maintenance technician. Fluent English is a must. Spanish is a plus. Reliable, handy, and safety-conscious. To Apply: Please reply to this ad with your resume and a brief summary of your experience.

Job Description Job Title: Comprehensive / Refractice Surgeon Location Name: Long Island, New York Facility Type: Multi-Specialty Practice Reason for Opening: Retirement and Practice Growth COMPENSATION What is a ballpark number for base compensation? AT MARKET -- PLUS PRODUCTION BONUS, SIGN ON BONUS Do you provide a Productivity or Quality Bonus? YES Sign On Bonus? YES Relocation Assistance? YES.. EITHER SIGN ON OR RELO If Private Practice, is there Partnership Potential? PRIVATE EQUITY BUY - EQUITY OPPORTUNITY AFTER 3 YEARS Do you offer full benefits? YES Do you offer Malpractice Insurance? YES Do you offer any Retirement Plans? YES Facility Size: LARGE—3 LOCATIONS, 12,000 SQ FT ASC Subspecialties: Plastics, Cornea, Glaucoma, Neuro, Retina, and Pediatric Practicing or New Graduates? – Prefers 3-5 years out of residency - high volume practice - New MDs will have to keep up Current Number of Physicians? 155 125 MDS/ 30 ODS--- TOTAL FOR ALL PRACTICES Other Support Staff? YES Equipment Available? ALCON & JNJ Weekday Call? MINIMAL Schedule: M-F Patient Volume Per Week: 100+ How will the Candidate's Time be Split? 2 LOCATIONS Teaching Opportunities? NEGOTIABLE Research Opportunities? YES Committee Opportunities? YES Is there any facility rotation in this position? How far is the distance between locations? 25 MILES If the facility is a clinic, how far is it from the hospital? – HOSPITAL 10 MILES, ASC- ON SITE Does the physician need to live within a certain radius of the facility? YES.. NASSAU OR SUFFOLK COUNTIES. GREAT SCHOOLS AND NEIGHBORHOODS Is this an Employed Position? YES. EQUITY OPPORTUNITY AFTER 3 YEARS

Job Description Aesthetic Nurse Practitioner (Injector) Job Summary Hiring an experienced Aesthetic NP/Injector to perform Botox, fillers, and skin treatments in a busy med spa / aesthetics clinic. Responsibilities Botox / Dysport injections Dermal fillers Consultations + treatment plans Microneedling, PRP, skin treatments Laser / IPL / RF treatments (or willing to train) Requirements Active NY NP license (FNP, AGNP, or ANP) 1+ year Botox & filler experience Knowledge of facial anatomy Strong communication skills Nice to Have Med spa / dermatology / plastics experience Laser or RF microneedling experience What We Offer Competitive pay + incentives High client volume Growth opportunities

Job Description BUYER POSITION OBJECTIVE This petro-chemical industry Purchasing Buyer/Agent position exists to perform the assigned Purchasing work to solicit the most competitive quotes in the most efficient and effective manner, reduce costs and obtain quality products with on-time delivery. The Purchasing Buyer/Agent conducts the procurement activities by procurement techniques (e.g. Analyzing previous cost, market trend and etc..), while ensuring the services can meet the timeline with the quality work in support of centralized procurement activities. Purchasing buyers aim to secure raw materials, services, and equipment at the lowest total. Ensure Uninterrupted Supply: Preventing production shutdowns due to shortages of critical raw materials/equipment/spare parts. MAJOR AREAS OF ACCOUNTABILITY • Negotiate to obtain the best possible price/terms for total cost saving & company best interest., • Perform the Purchasing services for the Plant Expansion and/or MRO (Maintenance/Repair /Operation) work at the Right time, with the Right quality, in the Right quantity, and at the Right price and procuring equipment/material/spare parts to keep plants running., • Evaluate bidder(s)' proposal(s) document and specification, and analyze the prices, previous performance, commitments and indications of financial responsibility in order to recommend the most advantageous proposal., • Verify the correctness of Purchase Order and/or Contract documentation in order to properly issue the PO/Award., • Evaluate bid responsiveness, vendor(s)' responsibility and its performance by observing and monitoring market conditions and business practices., • Perform job accountability and position function in terms of objectives, priorities and deadlines, and effectively communicate, collaborate, facilitate the communications between internal and external contacts including Plant Users (e.g. Engineering Center, Maintenance and Operation Groups), Legal, Accounting, and, all other contacts., • On time Blanket Orders renewal (issue BO renewal inquiries, evaluation/negotiation/final award/accounting certification)., • Inventory Optimization & Just-in-Time (JIT) Delivery: Allows for deliveries to be made on as-needed basis, helping the buyers reduce inventory holding costs while ensuring a steady supply to prevent shortages. QUALIFICATIONS • Entry Level or 1 year experience as Buyer, • Good in Microsoft Excel, Microsoft Word and Outlook., • Ability to work independently in a fast paced environment., • Must be detail oriented., • Good verbal and written communication skills., • Knowledge of AS400 is a plus., • Bachelor's degree., • Must have regular, reliable attendance as well as the ability to work outside the regular schedule as required.\nCompany Description We are committed to supplying the highest quality products and services to our customers, providing a safe and healthy workplace for our employees and contributing to the quality of life in the communities where we operate. This commitment is made possible through our dedicated people, consistent products, continued protection of the environment and ongoing investments in new product development, quality control systems and safe, modern and energy-efficient production facilities. We are committed to supplying the highest quality products and services to our customers, providing a safe and healthy workplace for our employees and contributing to the quality of life in the communities where we operate. This commitment is made possible through our dedicated people, consistent products, continued protection of the environment and ongoing investments in new product development, quality control systems and safe, modern and energy-efficient production facilities.

Job Description CONTRACTING AGENT I POSITION OBJECTIVE This petro-chemical industry contracting agent position exists to optimize the performance of Contracting services to solicit the most competitive bids in the most efficient and effective manner, reduce costs and obtain qualified craftsmen. The contracting agent facilitates the procurement activities and add value by integrating buying power and procurement techniques, while ensuring that the services can meet the timeline with the quality work in support of local or centralized procurement activities. MAJOR AREAS OF ACCOUNTABILITY • Perform the Contracting services for the plant expansion and/or maintenance work at the Right time, with the Right quality, in the Right quantity, and at the Right price., • Follow the procurement procedures and techniques to conduct the contracting services related to pre-award and post-award functions, and to perform well defined contract actions., • Evaluate contractors' bid document and specification, and analyze the prices, previous performance, commitments and indications of financial responsibility in order to recommend the most advantageous proposal., • Verify the correctness of Contract/PO documentation and properly issue the Notice of Award and Contract., • Observe and monitor market conditions and business practices to evaluate bid responsiveness, contractor responsibility and its performance., • Perform job accountability and position function in terms of objectives, priorities and deadlines, and effectively communicate, collaborate, facilitate, influence and motivate internal and external contacts including Engineering Center Staff, Maintenance and Operation Groups, Accounting, Local Contracting, and, all other contacts. QUALIFICATIONS • 0-3 years industry business experience, • Bachelors degree, • Proficiency in Microsoft Excel, Microsoft Word, and Outlook, • Ability to work independently in a fast paced environment, • Must be detail oriented, • Excellent verbal and written communication skills, • Knowledge of AS400 is a plus\nCompany Description We are committed to supplying the highest quality products and services to our customers, providing a safe and healthy workplace for our employees and contributing to the quality of life in the communities where we operate. This commitment is made possible through our dedicated people, consistent products, continued protection of the environment and ongoing investments in new product development, quality control systems and safe, modern and energy-efficient production facilities. We are committed to supplying the highest quality products and services to our customers, providing a safe and healthy workplace for our employees and contributing to the quality of life in the communities where we operate. This commitment is made possible through our dedicated people, consistent products, continued protection of the environment and ongoing investments in new product development, quality control systems and safe, modern and energy-efficient production facilities.

Job Description Hosokawa provides size reduction systems and powder processing solutions for chemical, pharmaceutical, food, mineral, plastics, and cosmetic applications. Throughout our history, we have led the industry in coarse to ultra-fine grinding, classification, mixing, drying, containment, compaction, and analytical equipment. The Sr. CNC Machinist (Lathe) is responsible for all turned machining, both manual and CNC lathe operation. This includes CNC programming for machined parts, tool selection, setup and operation. This position is responsible for the supervision of operators and the running of two CNC lathes with live tooling and manual lathes. Essential Duties • Write and modify G-Code programs to make parts optimally, • Tool selection including optimum cutting tools, speeds and feed rates, • Setup including multi-axis and tight tolerance (to 0.0001"), • Read and understand engineering drawings, • Ability to use inspection tools including calipers and micrometers, • Inspect or provide parts to the QC Inspector for inspection, • Train and support CNC Operators with large quantity runs, • Conduct preventative maintenance on machines, • Maintain a clean and safe work environment Basic Qualifications • High School Diploma, • 5+ years using CNC including programming, tool selection, setup and operation, • 3+ years programming in G-Code, • 3+ years in tooling/cutter selection, • 1+ year supervising operators, • Ability to self-inspect parts and use inspection tools accurately (calipers and micrometers), • Strong mathematical acumen - addition, subtraction, division, multiplication and geometry Preferred Qualifications • 10+ years programming and optimizing programs for tuned parts, • 5+ years with live tooling, • 3+ years with HAAS lathes Physical Requirements • Ability to visually inspect components and accurately read and use inspection tools, with or without reasonable accommodation., • Ability to lift and move materials weighing up to 50 pounds, with or without reasonable accommodation as required to perform the essential functions of the job., • Ability to stand, twist, turn, and /or bend for extended periods, up to 8 hours per workday, as required to perform the essential functions of the position, with or without reasonable accommodation. Salary/Rate Range: · $62,125-$105,582 Salaries/Rates will vary and may be above or below this rate commensurate with several factors including experience, education, training, location, and merit. Hosokawa Micron Powder Systems provides equal employment opportunities to applicants and employees without regard to race; color; sex; gender identity; sexual orientation; religious practices and observances; national origin; pregnancy, childbirth, or related medical conditions; status as a protected veteran or spouse/family member of a protected veteran; or disability. Hosokawa Micron Powder Systems is committed to providing reasonable accommodation to, among others, individuals with disabilities and disabled veterans. If you need an accommodation because of a disability to search and apply for a career opportunity with Hosokawa, please send an e-mail to hr@hmps.hosokawa.com to let us know the nature of your accommodation request and your contact information.

Job Description Job Summary: BD is seeking an R&D Project Engineer to support sustaining engineering and product development for medical devices, including syringes, needles, and medication delivery products. The role focuses on evaluating design changes, material and supplier alternatives, cost improvement opportunities, and product performance while ensuring compliance with medical device quality and regulatory requirements. Key Responsibilities: • Evaluate proposed product design, material, component, and supplier changes., • Develop and execute test protocols, bench testing, and comparative performance testing., • Perform risk assessments and support design verification and validation planning., • Analyze test data using statistical tools such as Minitab or JMP., • Collaborate with Quality, Regulatory, Procurement, Manufacturing, and suppliers., • Prepare technical reports, feasibility assessments, and project business cases. Required Qualifications: • Bachelor's degree in Mechanical, Biomedical, Plastics, Chemical, Materials Engineering, or a related field., • 3+ years of medical device R&D, product development, or sustaining engineering experience., • Knowledge of FDA design controls, ISO 13485, and ISO 14971., • Hands-on experience with test protocols, testing methods, and data analysis., • Strong technical documentation and cross-functional communication skills. Preferred: Experience with syringes, needles, catheters, plastics, elastomers, injection molding, or medical device material and supplier changes.

Job Description We are seeking a reliable, detail-oriented Seasonal Finishing Assistant to support finishing preparation across fast-paced, creative projects. Reporting functionally to the Finishing Department head and working closely with Production Managers and Lead Finishers, this role supports the preparation of fabricated elements through sanding, patching, and general surface preparation to ensure components are clean, consistent, and ready for finishing. This is a hands-on, production support role suited for someone who is resourceful, eager to learn, and thrives in an environment where priorities can shift quickly, with the intent of delivering exceptional results. Salary Range: $22 – $28 / hour (Dependent on experience) ABOUT US TWOSEVEN is a multidisciplinary design/build firm located in Brooklyn, New York. We specialize in creating store window displays, retail interiors, showrooms, and event activations for high-profile fashion, luxury, and lifestyle brands. TWOSEVEN offers a wide range of services - combining a design studio, fabrication workshop, and installation team, all under one roof. We devote ourselves to excellent craftsmanship, high-quality design, and attention to detail. Join our creative, friendly, and dynamic workplace. TWOSEVEN is an Equal Opportunity Employer. PRIMARY RESPONSIBILITIES • Sand, patch, and prepare fabricated components to meet finishing standards., • Fill seams, holes, and surface imperfections using appropriate materials., • Prepare a range of materials with attention to material-specific tolerances and surface requirements, including wood, laminates, plastics, and painted finishes., • Execute sanding and prep techniques appropriate to each material and finish type, avoiding damage to sensitive surfaces., • Use sanding materials, abrasives, and equipment efficiently, minimizing waste while upholding quality standards., • Follow direction from the Finishing Department Head, Lead Finishers, and Production Managers on priorities and output., • Organize and stage parts for finishing, labeling, and grouping as needed., • Handle and store prepped components carefully to prevent damage prior to finishing., • Ensure consistency in surface quality across batches and production runs., • Identify surface issues and flag concerns prior to finishing., • Keep work areas, tools, and materials clean and organized., • Support general shop needs as required during peak production periods. Requirements • High school diploma or equivalent; background in the arts or fabrication preferred., • 0-2 years of finishing, scenic, or related hands-on experience in fast-paced creative production workshops., • Basic familiarity with hand tools, sanding equipment, and shop safety practices., • Ability to follow direction and execute assigned tasks consistently., • Strong attention to detail and care when working on surface prep, sensitive materials, and finished surfaces., • Highly organized, reliable, and punctual, with a strong sense of accountability., • Maintains a calm, solution-driven attitude in high-pressure environments., • Excellent communication skills, both written and verbal., • Ability to lift 50+ lbs and remain standing for extended periods., • Must be flexible and adaptable, with a willingness to work occasional extended hours, including overnight, and weekends, when necessary., • Must be eligible to work in the U.S. Benefits • Up to 40 hours of paid sick leave per year (1hr. for every 30hrs. worked)., • Paid Family Leave after 175 days of employment., • Short and long-term disability insurance - on the 25th day of employment.

Job Description We are seeking a skilled, organized, and dependable CNC & Digital Fabrication Technician to support CNC programming, machine setup, CNC machining, and digital fabrication production for fast-paced, creative projects. Reporting functionally to the Digital Fabrication Department Head or Production leadership and working closely with project, design, production, and fabrication teams, this position supports CNC and digital fabrication production across the project lifecycle. This role is intended for a hands-on technician who can support daily production while continuing to develop stronger CAD/CAM experience through mentorship, training, and hands-on production experience. The ideal candidate is curious, flexible, and motivated by engineering, fabrication, creative problem-solving, with the ability to work well under pressure and deliver exception results. This position is ideal for someone eager to grow within a developing Digital Fabrication Department. Salary Range: $25 – $35 / hour (Dependent on experience) PRIMARY RESPONSIBILITIES CNC Programming, Operation & Digital Fabrication • Create, modify, and troubleshoot CNC toolpaths using Fusion 360 CAM and related shop workflows., • Translate Rhino models, drawings, and project documentation into accurate, production-ready machine workflows., • Run approved CNC programs and DFAB files across assigned equipment., • Support CNC setup, material loading, tool changes, and machine preparation., • Support CNC machining strategies for nested sheet-good, multi-operation, and 2-sided workflows., • Select and adjust CNC tooling, feeds, speeds, fixturing, and machining parameters with guidance as needed., • Prototype, test, and refine fabrication approaches for assigned work under department direction., • Operate Homag, Weeke, laser, 3D printing, thermoforming, and related equipment in accordance with shop standards., • Monitor machine performance and troubleshoot programming, tooling, or machine-related issues., • Inspect digitally fabricated components for accuracy, finish quality, and alignment with design intent. Workflow Coordination & Cross-Department Collaboration • Collaborate with Project/Production Managers, and Technical Designers to align scope, schedule, and shop capacity., • Support DFAB file preparation through review, flattening, batching, labeling, and Design coordination., • Flag missing, conflicting, or incomplete design information before machine production begins., • Support fabrication means, methods, and production strategies for complex builds., • Execute assigned machine queues as directed by department and production leadership., • Communicate production status and flag capacity, schedule, tooling, machine, material, or consumable concerns., • Participate in pre-production planning and post-project reviews to support execution and improve workflows., • Support peak-period AM/PM shift coverage, extended hours, evenings, or weekends when workload requires., • Collaborate across departments and take on tasks as needed to support overall shop capacity. Standards, Organization & Continuous Improvement • Maintain organized CAM files, machine settings, handoff notes, reports, and production documentation., • Support machine incident reports, production reports, and project-based material usage tracking., • Support development of department standards, SOPs, training materials, and documentation systems., • Reinforce standards across programming, setup, file organization, and production handoffs., • Coordinate material workflows, including sheet staging, nesting priorities, and machine readiness., • Monitor tooling, materials, and consumables, proactively flagging shortages and recurring issues., • Utilize CutRite and material management systems to support workflow optimization and material efficiency., • Support preventive maintenance and upkeep of CNC and related equipment, ensuring machines remain production-ready., • Support maintenance, repairs, service visits, and equipment priorities with the Equipment & Facilities Manager and Leads., • Stay current with relevant DFAB tools, materials, and production methods., • Maintain a clean, organized, and safe work environment, following all shop safety protocols. Requirements • High school diploma or equivalent; background in industrial design, architecture, or related field preferred., • 2+ years of CNC machining and CAM programming experience in fast-paced creative production workshops., • Working knowledge of Fusion 360 CAM and Rhino; Grasshopper or similar tool a plus., • Ability to execute complex machining operations, including multi-operation setups and 2-sided machining., • Ability to translate 3D models, shop drawings, and technical documentation into production-ready machine workflows., • Basic understanding of materials, tooling, feeds/speeds, fixturing, and fabrication methods., • Experience working with wood, MDF, plywood, plastics, foams, acrylics, laminates, and specialty sheet goods., • Experience with Homag/Weeke systems, CutRite, WoodWop, WoodCAD|CAM, or Intellistore preferred., • Hands-on experience with laser cutting and 3D printing workflows, including file prep, setup, and troubleshooting., • Working knowledge of thermoforming, plexi-polishing, fabrication, assembly, and material preparation methods., • Working knowledge of MS Office suite and Windows-based workflows, especially Excel., • Strong communication, organization, problem-solving, and leadership maturity when working cross-functionally., • Calm, collaborative, detail-oriented, and adaptable in fast-paced production environments., • Must be professional, punctual, and dependable, with a strong sense of accountability., • Must be available to work extended hours, evenings, and weekends during peak fabrication periods., • Physically capable of lifting and handling oversized sheet goods., • Forklift / hi-lo experience or willingness to be trained and authorized preferred., • Must be eligible to work in the U.S. ABOUT US TWOSEVEN is a multidisciplinary design/build firm located in Brooklyn, New York. We specialize in creating store window displays, retail interiors, showrooms, and event activations for high-profile fashion, luxury, and lifestyle brands. TWOSEVEN offers a wide range of services - combining a design studio, fabrication workshop, and installation team, all under one roof. We devote ourselves to excellent craftsmanship, high-quality design, and attention to detail. Join our creative, friendly, and dynamic workplace. TWOSEVEN is an Equal Opportunity Employer. Benefits • Employee Health Insurance. Three plans are available after a two-month waiting period, with TwoSeven covering from 55 to 70% of the premium., • (401k) After one year of employment, up to 4% of the salary matched., • Profit-sharing of up to 5% of salary after 1 year of employment., • Up to 80 hours PTO per year., • Up to 40 hours of sick leave per year., • 6 Paid holidays (New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day)., • Life, short-term, and long-term insurance., • Paid Family Leave.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Company parties, • Competitive salary, • Free uniforms, • Health insurance, • Paid time off Surgical Scrub Tech / Medical Assistant | Facial Plastic Surgery (NYC) We are a boutique practice devoted entirely to the face, is seeking an experienced Surgical Scrub Technician / Medical Assistant to support rhinoplasty and facial rejuvenation cases in our AAAASF-accredited in-office operating room. This is a dual role: scrubbing in on surgical days and assisting with clinical and medical assisting duties on non-surgical days. This position requires hands-on operating room experience. Candidates without prior scrub tech experience will not be considered. Responsibilities Surgical days (scrub tech): • Scrub in and assist the surgeon on facial and nasal cases (rhinoplasty, facelift, and related procedures), • Set up, maintain, and break down the sterile field and back table, • Anticipate the surgeon's needs and pass instruments efficiently throughout the case, • Maintain strict aseptic technique and patient safety standards at all timesSterile processing / instrument care:, • Clean, decontaminate, inspect, package, and sterilize instruments in accordance with SPD protocols, • Operate and monitor the autoclave, including correct cycle selection, loading, and documentation, • Run and log biological and chemical indicators; maintain sterilization records for AAAASF compliance, • Organize, track, and maintain instrument trays and setsNon-surgical days (medical assisting):, • Room patients, take and record vitals and history, • Prepare treatment and consultation rooms and assist during in-office procedures, • Manage stocking, supply inventory, and ordering, • Support general clinical workflow and front-of-house clinical needs as required Requirements • Documented experience as a surgical scrub technician (facial / plastic surgery experience strongly preferred), • Working knowledge of SPD standards, sterile processing, and autoclave operation, • Familiarity with instrument washing, organization, and tray management, • Strong understanding of aseptic technique and OR safety, • Medical assisting experience and comfort with clinical duties, • Reliable, detail-oriented, and able to work in a high-standard, low-volume boutique setting

Job DescriptionBednark is seeking an experienced Technical Director to lead the flow of technical design from project planning through fabrication, logistics, and installation. This is a cross-functional operations leadership role for someone who can manage technical resources across a fast-moving portfolio, bring install thinking into the design process, and build standards and systems that make every downstream team more effective. A major focus of the role is maintaining momentum. The Technical Director makes sure drafting resources are aligned to the highest priorities, teams have clear deadlines and complete information, blocked work is moved quickly, and revision cycles do not quietly consume capacity needed elsewhere. The right person combines deep technical and fabrication knowledge with strong resource management, field judgment, and the ability to influence Project Management, Production, Logistics, and Install. This is not a role for someone who wants to personally draw or solve every detail; it is for a leader who can create clarity, set priorities, and make the entire technical process work better. Key Responsibilities:Technical Design Resource Management: • Own the portfolio-wide resource plan for the Technical Design Office across all active projects, balancing deadlines, complexity, revision load, fabrication dates, install dates, and available drafting capacity., • Assign drafting resources and establish clear deliverables, priorities, and time expectations so each designer knows what is due, when it is due, and when they are expected to move to the next priority., • Maintain active visibility into what each drafter is working on, what is blocking them, and where capacity can be reallocated when information is missing or priorities change., • Partner with Project Managers to establish deadlines for technical information, decisions, redlines, and approvals before late inputs create downstream schedule problems., • Manage revision cycles deliberately. Push for consolidated feedback and complete decision-making rather than allowing repeated small changes to consume drafting capacity., • Identify projects that are absorbing disproportionate technical resources or creating risk to the broader portfolio, and reset priorities or sequencing with Operations and PMO as needed., • Protect technical quality while maintaining pace, throughput, focus, and momentum across the department. Design for Install & Field Readiness: • Ensure installation is considered during technical design, including site access, indoor versus outdoor use, breakdown and modularity, weight and size, field connections, tolerances, rigging, finish durability, crew size, equipment, and available install time., • Challenge details that may work on paper but are unnecessarily slow, fragile, difficult, or expensive to install., • Balance finish quality, fabrication efficiency, transportability, and field speed based on the project., • Bring Site Superintendents into planning early enough to influence how work is detailed, broken down, packed, sequenced, and assembled., • Lead and develop Site Superintendents as field leaders and ensure they arrive onsite with clear authority, complete information, and a realistic execution plan., • Ensure installation packages communicate element identification, assembly sequence, hardware and fasteners, tools and equipment, critical dimensions, and project-specific field requirements., • Ensure Technical Design provides Logistics with the element lists, quantities, dimensions, breakdown information, and other data required for trucking, packout, and site handling., • Close the loop after installs so recurring field issues, difficult details, missing information, or inefficient assembly methods become improvements to future technical standards. Technical Standards, Systems & Process: • Own and continuously improve company standards for technical drawings, documentation, tolerances, material and finish callouts, hardware, connection details, element identification, revision control, and drawing releases., • Define what "ready for production" and "ready for install" mean and establish practical release gates that prevent incomplete work from moving downstream., • Standardize the flow of technical information into Production, Procurement, Logistics, and Installation so teams receive the information they need in a consistent and usable format., • Maximize CAD, modeling, and automation tools to reduce duplicate work. Use technical models and drawing data to generate takeoffs, hardware schedules, element lists, cut information, and pack-list inputs wherever practical., • Develop templates, checklists, detail libraries, standard assemblies, naming conventions, and other tools that improve speed and consistency., • Use feedback from the shop and field to continuously improve technical standards and workflows. Cross-Functional Leadership: • Act as the technical bridge between Project Management, Technical Design, Production, Procurement, Logistics, fabrication departments, and Installation., • Communicate how technical decisions affect schedule, cost, production sequence, logistics, and field execution so teams can make informed tradeoffs early., • Create clear ownership and accountability across departments while keeping technical work moving when conditions or priorities change., • Provide senior technical judgment on complex or high-risk projects and coordinate with engineers, specialty consultants, vendors, and other external partners when required. What Success Looks Like: • The company has a visible, credible technical-design resource plan, and one project cannot quietly consume capacity at the expense of the rest of the portfolio., • Drafters have clear priorities and deadlines, blocked time is minimized, and resources move quickly when information is missing or work stalls., • Project Managers understand when technical inputs and consolidated feedback are required, and revision cycles become fewer, more deliberate, and more efficient., • Projects are designed with field realities in mind, and Site Superintendents are involved early enough to influence breakdown, sequencing, logistics, and assembly strategy., • Drawing and install packages are consistent, complete, and usable by Production, Procurement, Logistics, and field teams without unnecessary interpretation or rework., • Technical models and automation increasingly produce the takeoffs, schedules, element data, and other information needed by downstream teams., • Field issues caused by preventable detailing decisions, incomplete information, poor install planning, or incomplete packout decline over time., • When priorities change or projects become difficult, the department remains controlled and productive and momentum is maintained. Required Experience & Capabilities: • Significant experience in technical direction, experiential fabrication, scenic fabrication, custom millwork, architectural fabrication, construction, installation, or a closely related environment., • Demonstrated leadership experience overseeing technical design, drafting, fabrication, construction, or installation teams and coordinating resources across multiple simultaneous projects., • Strong understanding of wood, metal, plastics, composites, finishes, hardware, mechanical connections, structural systems, rigging, and field-installation methods., • Strong ability to read, review, and provide direction on architectural, shop, fabrication, and installation drawings., • Experience translating creative or architectural intent into practical, buildable, transportable, and installable solutions., • Strong understanding of project sequencing, site logistics, installation planning, and production workflows., • Ability to manage competing priorities, identify bottlenecks early, make timely decisions, and communicate clear expectations across functions., • Proficiency with relevant CAD, 3D modeling, project-management, and documentation platforms., • Strong written and verbal communication skills and the ability to influence experienced technical and operational teams. Preferred Background:Experience in one or more of the following environments is especially relevant: • Experiential marketing and brand activations., • Live events, exhibitions, and temporary installations., • Retail environments., • Scenic fabrication., • Custom architectural or specialty fabrication., • CAD and 3D modeling platforms such as AutoCAD, Rhino, Vectorworks, SolidWorks, or similar., • CNC production, digital fabrication, AV integration, lighting, automation, or specialty fabrication methods., • Developing technical standards, drawing-review procedures, and quality-control systems. Travel & Schedule Expectations:This is primarily a Brooklyn-based leadership role, but the Technical Director must be able to visit active project sites and travel as required. Critical project phases may occasionally require evening, overnight, early-morning, or weekend availability to support installation planning, field escalation, or high-risk execution.

Job Description Job Title: CorneaSurgeon / Ophthalmologist Location Name: Nassau County, Long Island (commutable from Brooklyn/Queens) Facility Type: Multi-Specialty Practice Reason for Opening: Retirement and Practice Growth COMPENSATION What is a ballpark number for base compensation? AT MARKET -- PLUS PRODUCTION BONUS, SIGN ON BONUS Do you provide a Productivity or Quality Bonus? YES Sign On Bonus? YES Relocation Assistance? YES.. EITHER SIGN ON OR RELO If Private Practice, is there Partnership Potential? PRIVATE EQUITY BUY - EQUITY OPPORTUNITY AFTER 3 YEARS Do you offer full benefits? YES Do you offer Malpractice Insurance? YES Do you offer any Retirement Plans? YES Facility Size: LARGE—3 LOCATIONS, 12,000 SQ FT ASC Subspecialties: Plastics, Cornea, Glaucoma, Neuro, Retina, and Pediatric Practicing or New Graduates? – Prefers 3-5 years out of residency - high volume practice - New MDs will have to keep up Current Number of Physicians? 44 MDS/ 5ODS Other Support Staff? YES Equipment Available? ALCON & J&J Weekday Call? MINIMAL Schedule: M-F Patient Volume Per Week: 100+ How will the Candidate's Time be Split? 2 LOCATIONS Teaching Opportunities? NEGOTIABLE Research Opportunities? YES Committee Opportunities? YES Is there any facility rotation in this position? How far is the distance between locations? 25 MILES If the facility is a clinic, how far is it from the hospital? – HOSPITAL 10 MILES, ASC- ON SITE Does the physician need to live within a certain radius of the facility? YES.. NASSAU OR SUFFOLK COUNTIES. GREAT SCHOOLS AND NEIGHBORHOODS Is this an Employed Position? YES. EQUITY OPPORTUNITY AFTER 3 YEARS

Job Description Hunter Douglas is the world's leading manufacturer of window coverings and a major manufacturer of architectural products. We are a brand that you know and trust. With more than 100 years of innovation, we've defined our industry with proprietary products that deliver revolutionary style and functionality and can be found in millions of homes and commercial buildings globally. We are searching for candidates that are driven, intelligent, creative, and entrepreneurial. By offering challenging and accelerated opportunities for growth, powered by a shared hunger for success, we create a space for your career to thrive. In return for your expertise, we are committed to providing competitive and robust total compensation and benefit packages to ensure you feel valued. Our dream is to become the fastest growing, most loved, window covering company in the world. What's yours? Category Procurement Manager – Wood & Shutters One of the pillars of our North American division is spread across four different sites in Mexico where a blend of manufacturing and fabrication occurs. At each location we pride ourselves on exemplary safety and employee-first standards, as we pioneer production processes to be best in class. It is our focus on quality and growth that makes us an employer of choice and helps us maintain our culture of excellence. Position Overview The Category Procurement Manager – Wood & Shutters is responsible for developing and executing global sourcing strategies for wood, shutters, and related finished goods categories across Hunter Douglas businesses. This role partners closely with cross-functional stakeholders to drive cost savings, supplier performance, supply continuity, and operational excellence while supporting business growth objectives. Success in this position directly contributes to annual productivity targets, strategic procurement initiatives, and overall business performance. What you'll do • Develop and execute global category strategies for wood, shutters, and related finished goods to support business objectives and long-term growth., • Serve as a trusted advisor to stakeholders by providing procurement expertise, market intelligence, and strategic sourcing recommendations., • Lead end-to-end sourcing events, including requirements gathering, market analysis, supplier selection, contract negotiations, and supplier onboarding., • Deliver year-over-year cost savings, payment term improvements, and other value-added contributions that positively impact business results., • Analyze spend data and procurement metrics to identify cost reduction opportunities and improve sourcing effectiveness., • Build and manage strategic supplier relationships, including conducting supplier business reviews and driving continuous improvement initiatives., • Establish and monitor supplier performance metrics, service levels, compliance standards, and key performance indicators (KPIs)., • Collaborate with Supply Chain, Operations, Quality, Engineering, PMO, and R&D teams to support manufacturing and business requirements., • All other duties as assigned.Who you are, • Bachelor's degree in Supply Chain, Business Administration, Engineering, or a related field., • Minimum 5-7 years of progressive sourcing, procurement, or supply chain experience., • Experience managing direct material categories within a manufacturing environment., • Strong contract negotiation, supplier management, and strategic sourcing experience., • Experience working with wood, plastics, finished goods, manufacturing, or engineering-related categories preferred., • Working knowledge of SAP, ERP, and MRP systems within a manufacturing environment., • Strong analytical and quantitative problem-solving skills with the ability to leverage data for decision-making., • Advanced proficiency in Microsoft Office applications, particularly Excel, PowerPoint, and Word., • Excellent interpersonal, communication, presentation, and stakeholder management skills., • Ability to manage multiple priorities, work effectively in cross-functional teams, and travel up to 25%.What's in it for you, • Annual base salary range: Competitive and commensurate with experience, • Bonus target range: Based on company and individual performance, • Generous benefits package including medical, dental, vision, life, and disability coverage, • A company culture that prioritizes internal development and professional growth, • Time off with pay, • Retirement savings plan with employer contribution opportunities, • Paid parental leave, • Wellness programs and Hunter Douglas product discounts Please note, all offers presented to candidates are carefully crafted to ensure market competitiveness, equity, and reflect the individual candidate's education, experience, skills, and potential. Hunter Douglas is an Equal Opportunity Employer and complies with applicable employment laws. EOE/M/F/Vet/Disabled are encouraged to apply. By submitting your application below, you are providing your prior consent to receive SMS messages to notify you of any updates to your application status and to engage in discussion throughout your application process. You can cancel the SMS service at any time. Just text "STOP" to any of our texts to unsubscribe. Message & data rates may apply. Message frequency may vary. If you have any questions regarding privacy, please read our privacy policy, https://www.hunterdouglas.com/privacy-policy or terms of use https://www.hunterdouglas.com/terms-of-use

Job Description Who You Are: Step into the warmth and excitement of the holiday season as a Seasonal Beauty Host with L'Occitane at our Garden State Plaza boutique. You will welcome each guest through our iconic yellow doors and help transform holiday shopping into a memorable, sensorial experience. With genuine hospitality, thoughtful product recommendations, and a passion for gifting, you will assist guests in discovering meaningful ways to celebrate the ones they care about. The Fundamentals of What You’ll Do: • Be the Host: Greet every guest with warmth and festive energy, creating an inviting atmosphere and a personalized sensorial experience., • Make Gifting Feel Effortless: Anticipate each guest's needs, listen with care, and recommend thoughtful skincare, body care, and fragrance gifts for everyone on their list., • Thrive in the Holiday Moment: Remain flexible, positive, and attentive in a fast-paced environment while balancing multiple guests and priorities., • Let Success Drive You: Support sales goals and daily store operations by taking initiative, replenishing product, maintaining visual standards, and putting the guest first., • Foster a Team Culture: Collaborate with colleagues, step in where needed, and contribute to a supportive, inclusive team throughout the holiday season., • Communicate with Care: Adapt your communication style to different guests and team members, welcome feedback, and help create smooth handoffs during peak traffic.We value hearing from individuals who possess:, • Warm, engaging communication skills and a genuine desire to create memorable guest experiences., • A proactive, entrepreneurial attitude experience in retail, hospitality, or a sales-driven environment is beneficial., • A guest-first mindset with the ability to listen, personalize recommendations, and support holiday gifting needs., • Interest in skincare, body care, fragrance, and the art of gifting is beneficial., • Adaptability, reliability, and flexibility to support a seasonal retail schedule, including peak shopping periods., • Basic technology skills and comfort learning point-of-sale and store tools. We welcome talent with diverse experiences, ideas, and skills. We value your mindset over skills, skills are trainable. We are committed to the Planet. We contribute to the company's waste reduction targets through their support of related in-store initiatives, such as our in-store recycling program, following inventory management guidelines to reduce product waste, and eliminating the purchase of single-use plastics, as well as by promoting our refill products to heat targets. The pay range for this position is $16.46 - $18.93 per hour (depending on skills and experience). All Applicants: L'Occitane's Privacy Statement United States Applicants Only: Employee Rights FMLA: Posters FMLA Special Rules for Returning Military Members (USERRA) Powered by JazzHR NVtE1tZTnR

Job Description Job Title: Comprehensive / Refractice Surgeon Location Name: Long Island, New York Facility Type: Multi-Specialty Practice Reason for Opening: Retirement and Practice Growth COMPENSATION What is a ballpark number for base compensation? AT MARKET -- PLUS PRODUCTION BONUS, SIGN ON BONUS Do you provide a Productivity or Quality Bonus? YES Sign On Bonus? YES Relocation Assistance? YES.. EITHER SIGN ON OR RELO If Private Practice, is there Partnership Potential? PRIVATE EQUITY BUY - EQUITY OPPORTUNITY AFTER 3 YEARS Do you offer full benefits? YES Do you offer Malpractice Insurance? YES Do you offer any Retirement Plans? YES Facility Size: LARGE—3 LOCATIONS, 12,000 SQ FT ASC Subspecialties: Plastics, Cornea, Glaucoma, Neuro, Retina, and Pediatric Practicing or New Graduates? – Prefers 3-5 years out of residency - high volume practice - New MDs will have to keep up Current Number of Physicians? 44 MDS/ 5ODS--- TOTAL FOR ALL PRACTICES Other Support Staff? YES Equipment Available? ALCON & JNJ Weekday Call? MINIMAL Schedule: M-F Patient Volume Per Week: 100+ How will the Candidate's Time be Split? 2 LOCATIONS Teaching Opportunities? NEGOTIABLE Research Opportunities? YES Committee Opportunities? YES How far is the distance between locations? 25 MILES If the facility is a clinic, how far is it from the hospital? – HOSPITAL 10 MILES, ASC- ON SITE Does the physician need to live within a certain radius of the facility? YES.. NASSAU OR SUFFOLK COUNTIES. GREAT SCHOOLS AND NEIGHBORHOODS Is this an Employed Position? YES. EQUITY OPPORTUNITY AFTER 3 YEARS

Job Description Spray Finisher Special Event Fabrication company seeks Spray Finisher for project-based work, with the possibility of full-time employment. Our fully equipped shop in Secaucus, NJ specializes in scenic elements and custom fabrications. Candidates must have experience applying a variety of finishes, including paints, stains, clear coats, and metallics to scenic elements and custom fabrications. ESSENTIAL - REQUIRED SKILLS • 3+ years extensive experience working with various paint sheens, airless guns, and HVLPs, • 3+ years of professional experience in spray finishing, in scenic fabrication, custom carpentry or related field, • Strong understanding in the use of Bondo, ready patch, joint compound and troweling materials such as thin set, • Experience working with large-scale scenic pieces or event fabrications, • Ensure proper adhesion and durability of finishes on a variety of substrates including wood, MDF, metal, plastics and fabric, • Ability to prepare surfaces for finishing, including sanding, priming and masking, • Experience in custom tinting/mixing paint, stain color and clear coats based on color theory, design specification renderings, color-matching based on existing pieces and pantone system while ensuring consistent results, • Ability to read and understand paint elevations and interpret design renderings, • Touch-up and maintenance of all completed projects, • Physically capable of undertaking the requirements of the position including lifting up to 50 lbs., working at height on ladders, scaffolding and access platforms as needed, bending, stretching and reaching for long periods of time, • Effective time management skills to work efficiently in a fast-paced, deadline-driven environment while maintaining a keen eye for detail and craftsmanship and the ability to work as part of a team in a busy workshop environment GENERAL SHOP DUTIES • Collaborate closely with the Scenic Charge to meet project deadlines and deliver high-quality results, • Conduct quality control checks to ensure that finishes meet the highest standards for consistency and durability, • Troubleshoot and adjust spray equipment to maintain optimal performance, • Maintain a clean, safe, and organized spray booth and finishing area, • Understanding of proper ventilation, safety protocols, and handling of finishing materials, • Able to follow all safety protocols related to ventilation, PPE, and hazardous materials, • Support Work - Keeping the shop clean. If not currently assigned a task, cleaning and putting tools away., • Any additional tasks as requested by the Scenic Charge or the PM -Hourly Position with possibility of overtime when necessary. Please submit your brief cover letter detailing your experience in spray finishing, resume and portfolio We look forward to seeing your work and potentially welcoming you to the KadaN Productions team! \nCompany Description Founded in 1993, Kadan Productions is a full-service production company that specializes in fashion shows and events. We cater to a wide range of clients and work to create the best experience possible in the events industry. KadaN's facilities include a design/production office adjacent to a 80,000 square foot shop. Our facility is fully equipped for woodworking and cabinetry, metal working, upholstering, and scenic painting/faux finish paint treatments. Our facility also houses an extensive rental stock for your event needs. *Be sure your resume file is named with your last name and first name. *Your resume (not including a portfolio) should be TWO pages or less. More than 2 page will not be looked at. Founded in 1993, Kadan Productions is a full-service production company that specializes in fashion shows and events. We cater to a wide range of clients and work to create the best experience possible in the events industry. \r\nKadaN's facilities include a design/production office adjacent to a 80,000 square foot shop. Our facility is fully equipped for woodworking and cabinetry, metal working, upholstering, and scenic painting/faux finish paint treatments. Our facility also houses an extensive rental stock for your event needs.\r\nBe sure your resume file is named with your last name and first name.\r\nYour resume (not including a portfolio) should be TWO pages or less. More than 2 page will not be looked at.

Job DescriptionEXPERIENCE: • Minimum of 3 years first assist or if new candidate recently completed a surgical residency. LOCATION: • Southern Westchester County, New York. JOB SUMMARY: 40hrs/wk. Excellent opportunity for experienced PA to work in a hospital-based surgical practice. Function under the supervision of supervising attending surgeon on each of the following services listed below. Staff PAs comprise the surgical house-staff and as part of the attending MD/PA team, PAs are involved in the total care of the surgical patient from admission to discharge. • First Assistant in a variety of specialties: Bariatric, General, Head & Neck, OBGYN, Orthopedic, Vascular, Plastics, Neurosurgery, and Thoracic., • DaVinci Robot experience a plus but not necessary as we will train., • Morning rounds., • Pre-op and Post-op surgical patients., • History and Physicals on routine and emergent admissions., • Perform surgical consultations. SKILLS/REQUIREMENTS: • 3 years of first assist surgical experience or a new candidate who recently completed a surgical residency., • Excellent suturing technique., • Comfortable working independently performing invasive procedures ie. central lines, arterial lines, chest tubes, dialysis catheters, incisions and drainage., • Excellent organizational and interpersonal skills., • Strong work ethic. Compensation: Includes On-Call Responsibility.

Job Description Job Title: Glaucoma Surgeon / Ophthalmologist Location Name: New York Ciy Boroughs Facility Type: Multi-Specialty Practice Reason for Opening: Retirement and Practice Growth COMPENSATION What is a ballpark number for base compensation? AT MARKET -- PLUS PRODUCTION BONUS, SIGN ON BONUS Do you provide a Productivity or Quality Bonus? YES Sign On Bonus? YES Relocation Assistance? YES.. EITHER SIGN ON OR RELO If Private Practice, is there Partnership Potential? PRIVATE EQUITY BUY - EQUITY OPPORTUNITY AFTER 3 YEARS Do you offer full benefits? YES Do you offer Malpractice Insurance? YES Do you offer any Retirement Plans? YES Facility Size: LARGE—3 LOCATIONS, 12,000 SQ FT ASC Subspecialties: Plastics, Cornea, Glaucoma, Neuro, Retina, and Pediatric Practicing or New Graduates? – Prefers 3-5 years out of residency - high volume practice - New MDs will have to keep up Current Number of Physicians? 155 125 MDS/ 30 ODS--- TOTAL FOR ALL PRACTICES Other Support Staff? YES Equipment Available? ALCON & JNJ Weekday Call? MINIMAL Schedule: M-F Patient Volume Per Week: 100+ How will the Candidate's Time be Split? 2 LOCATIONS Teaching Opportunities? NEGOTIABLE Research Opportunities? YES Committee Opportunities? YES Is there any facility rotation in this position? How far is the distance between locations? 25 MILES If the facility is a clinic, how far is it from the hospital? – HOSPITAL 10 MILES, ASC- ON SITE Does the physician need to live within a certain radius of the facility? YES.. NASSAU OR SUFFOLK COUNTIES. GREAT SCHOOLS AND NEIGHBORHOODS Is this an Employed Position? YES. EQUITY OPPORTUNITY AFTER 3 YEARS

Job Description Job Title: R&D Project Engineer / Product Development Engineer II Location: Franklin Lakes, NJ 07417 Schedule: Monday–Thursday Onsite, Friday Remote Job Description: We are seeking an experienced R&D Project Engineer / Product Development Engineer II to support sustaining engineering and cost improvement initiatives for medical devices, including syringes, needles, and vascular care products. The ideal candidate will evaluate design changes, alternative materials, components, packaging, and suppliers while ensuring product quality, safety, and regulatory compliance. Key Responsibilities: • Evaluate proposed design changes and conduct feasibility studies and product testing., • Develop test protocols, analyze data, and prepare technical reports., • Perform risk assessments and support design control documentation., • Collaborate with Quality, Regulatory, Operations, Procurement, and suppliers., • Develop project cost estimates, savings analyses, and go/no-go recommendations., • Prepare verification and validation strategies and execution-ready project plans. Required Qualifications: • Bachelor’s degree in Mechanical, Biomedical, Plastics, Chemical, Materials Engineering, or a related field., • Minimum 3 years of medical device product development or sustaining engineering experience in an FDA-regulated environment., • Knowledge of FDA design controls, ISO 13485, and ISO 14971., • Hands-on experience with test protocols, statistical data analysis, and tools such as Minitab or JMP., • Strong technical writing, problem-solving, and cross-functional communication skills. Preferred: Experience with single-use medical devices, plastics and elastomers, supplier/material changes, ISO 11607, ISO 7886, or ISO 80369. \nCompany Description LanceSoft is rated as one of the largest staffing firms in the US by SIA. Our mission is to establish global cross-culture human connections that further the careers of our employees and strengthen the businesses of our clients. We are driven to use the power of our global network to connect businesses with the right people, and people with the right businesses without bias. We provide Global Workforce Solutions with a human touch. LanceSoft is rated as one of the largest staffing firms in the US by SIA. Our mission is to establish global cross-culture human connections that further the careers of our employees and strengthen the businesses of our clients. We are driven to use the power of our global network to connect businesses with the right people, and people with the right businesses without bias. We provide Global Workforce Solutions with a human touch.

Job Description PRODUCT STEWARDSHIP SPECIALIST POSITION OBJECTIVE • This position will assist with the planning, implementation and maintenance of FPC USA’s product stewardship programs for compliance with applicable local, state, federal and global chemical regulations and industrial standards., • Supports operation and business divisions in handling customers’ regulatory inquiries of products manufactured at FPC USA’s TX and LA facilities; as well as facilitates product stewardship compliance for products that FPC USA imports and sells globally., • Additional responsibilities of this position may include compliance audits (GMP), training scheduling, corrective action tracking, and other EHS related activities (DOT/SDS and Product LCA assessment). MAJOR AREAS OF ACCOUNTABILITY • Coordinates FPC USA compliance with domestic, global regulations and industry standards related to product stewardship programs including:, • Food contact application and GMP compliance (FDA, EU, HPB, others), • Drug and Device master files submission, • Chemical registration and reporting management (TSCA, REACH, others), • Industry standards for product safety and application (ISO, IATF, Kosher, NSF, USP etc.), • Responds to customer inquiries and questionnaires for product stewardship and regulatory information., • Maintains FPC USA regulatory statements, declarations and Safety Data Sheets (SDS) for all branded FPC USA products., • Reviews and updates FPC’s internal compliance procedures and participates in the audits of product stewardship program compliance and tracks corrective actions from audits., • Collaborates with multiple divisions to manage product safety, environmental, and human impacts across the product life cycle and supply chain, supporting FPC’s ESG and sustainability initiatives., • Develops and maintains FPC USA’s product regulatory database for compliance., • Performs other similar and related duties as required. QUALIFICATIONS Previous Related Experience Required • 0-3 years in a chemical, engineering, safety, environmental, other scientific related or regulatory role or major, • General knowledge of petrochemical and plastics product is beneficial, • Experience or knowledge in Sustainability or ESG beneficial Technical Skills Required to Perform This Job • Comfortable with scientific, regulatory and technical terminology and review of regulations. Ability to evaluate technical questions, prioritize actions and research responses., • Able to interpret regulations and implement them for compliance., • Strong writing and communication skills, both professionally and effectively., • Excellent organizational, time and project management skills. Close attention to detail and sharp investigative skills., • Ability to effectively handle multiple priorities as well as to evaluate situations, identify options and implement effective solutions quickly and efficiently., • Ability to work in a matrixed environment, address a range of functions and diverse businesses, and interact with individuals at all levels within the organization. Ability to work independently as well as within a variety of teams., • Strong computer skills, highly proficient with Microsoft Office functions including Excel, PowerPoint, Word as well as other software analytical tools and e-mail and meeting management software. Ability to use internet and web-based resources efficiently and effectively. Education • Required: Bachelor’s degree in Chemistry, Biology, Engineering, Environmental Science, Environmental Engineering, or science related discipline. Standard Requirements • Approximately 10-20% travel, primarily to company plant locations in Texas and Louisiana., • Must have regular, reliable attendance as well as the ability to periodically work outside the regular schedule., • Ability to communicate effectively with a diverse slate of individuals, including employees and management. Projects a positive attitude and desire to learn., • Assure compliance with all company safety, health, and security programs and practices., • Provide management and leadership timely and thorough reporting of all incidents to ensure all incidents are investigated properly., • Take personal responsibility and ownership for safety, including bringing the attitude that “I am individually responsible for safety” to the job each and every day., • Must demonstrate exceptional teamwork and customer service; behave professionally; treat others with respect and dignity., • Must have good oral and written communication skills.\nCompany Description We are committed to supplying the highest quality products and services to our customers, providing a safe and healthy workplace for our employees and contributing to the quality of life in the communities where we operate. This commitment is made possible through our dedicated people, consistent products, continued protection of the environment and ongoing investments in new product development, quality control systems and safe, modern and energy-efficient production facilities. We are committed to supplying the highest quality products and services to our customers, providing a safe and healthy workplace for our employees and contributing to the quality of life in the communities where we operate. This commitment is made possible through our dedicated people, consistent products, continued protection of the environment and ongoing investments in new product development, quality control systems and safe, modern and energy-efficient production facilities.

Job DescriptionManufacturing Design Engineer Job Type: Contractor Location: Remote Job Overview We are seeking experienced Manufacturing Design Engineers to contribute to an advanced mechanical design and manufacturing project. In this role, you will apply your engineering expertise to help improve next-generation AI systems through high-quality, real-world design input. You will use FreeCAD or similar parametric CAD platforms to create, document, review, and validate production-ready mechanical components and assemblies. This opportunity is ideal for professionals with strong mechanical design, manufacturing, CAD validation, and technical documentation experience. No prior AI experience is required—your engineering expertise and domain knowledge are what matter most. Scope of Work Create and modify detailed parametric 3D CAD models of mechanical components and assemblies using FreeCAD or comparable CAD software. Develop comprehensive engineering drawings, including GD&T, dimensional requirements, and tolerance stack-ups, suitable for manufacturing handoff. Design components for manufacturing processes including CNC machining, sheet metal fabrication, plastics, and injection molding. Perform CAD validation and quality assurance reviews to verify model accuracy, design intent, and production readiness. Prepare clear technical documentation, design notes, and assembly instructions for use as high-quality reference materials. Review and incorporate feedback from technical reviewers to improve CAD models, drawings, and supporting documentation. Apply Design for Manufacturing (DFM) principles to ensure designs are practical, efficient, and manufacturable. Identify and resolve modeling, dimensional, assembly, and manufacturability issues before production handoff. Required Skills FreeCAD Parametric CAD Modeling Mechanical Design 3D CAD Modeling Assembly Design Engineering Drawings CAD Validation & Quality Assurance Technical Documentation Design for Manufacturing (DFM) GD&T and tolerance analysis Manufacturing design principles Preferred Qualifications 2+ years of experience designing mechanical components for manufacturing environments. Strong proficiency in FreeCAD or similar parametric CAD software, including advanced modeling, assemblies, and drawing generation. Hands-on experience with manufacturing considerations for CNC machining, sheet metal, plastics, and injection molding. Strong understanding of GD&T, tolerance analysis, and DFM best practices. Demonstrated ability to create production-grade CAD models and validate designs against real-world manufacturability requirements. Experience interpreting engineering drawings, manufacturing specifications, and technical documentation. Strong attention to detail and ability to identify CAD and documentation inconsistencies. Excellent written and verbal communication skills for documenting technical decisions and collaborating with reviewers. Ability to work independently in a remote environment and meet project quality and delivery requirements

Job DescriptionCNC Machinist Job Type: Contractor Location: Remote Job Overview We are seeking experienced CNC Machinists to support a project focused on advanced part production and process optimization. You will provide expertise in CNC machine setup, operation, precision measurement, blueprint interpretation, and machining troubleshooting. No prior AI experience is required. Key Responsibilities • Set up and operate hobbyist and industrial CNC machines, including Haas systems., • Load and verify CNC programs, install tooling, configure work-holding, and set work offsets., • Run first-piece inspections and adjust setups for dimensional accuracy., • Troubleshoot issues such as tool wear, chatter, and dimensional variation., • Use calipers, micrometers, indicators, and CMMs for precision inspection., • Interpret engineering drawings, GD&T, and manufacturing documentation., • Provide feedback on machining processes, setups, and manufacturability., • Perform routine machine maintenance and maintain a safe workspace.Required Qualifications, • 5+ years of hands-on CNC machining experience in setup and production., • Strong experience with Haas CNC controls, including VF-series machines., • Familiarity with hobbyist CNC platforms such as Makera Carvera preferred., • Strong blueprint reading and GD&T interpretation skills., • Experience with precision measurement tools., • Experience machining various metals and plastics., • Strong troubleshooting and process optimization skills., • Good written and verbal English communication skills.

Job Description Night Shift CNC Manager Newark, NJ – Headquarters $100,000-$150,000 Schedule: Monday–Thursday, 5:00 PM–3:00 AM Reports to: Director of Production Why This Role Exists We are looking for a strong production leader to take ownership of our night shift. This role is less about being the strongest CNC technician in the building and more about being an effective manager who can lead people, maintain accountability, follow production closely, and make sure the shift operates safely and consistently. You will lead a night-shift team of approximately 10–15 employees in a CNC-focused production environment. What You Will Own • Lead and manage approximately 10–15 night-shift production employees., • Maintain clear expectations around productivity, attendance, safety, quality, and performance., • Follow production throughout the shift and make sure daily output goals are achieved., • Address performance, staffing, workflow, and operational issues as they arise., • Maintain strong safety standards and reinforce safe operating practices., • Ensure quality issues are identified and addressed quickly., • Monitor production equipment and coordinate with Maintenance when downtime or equipment problems occur., • Keep the team focused, productive, and accountable throughout the shift., • Communicate clearly with Production leadership and the day shift regarding output, downtime, staffing, quality concerns, and outstanding issues., • Identify opportunities to improve productivity, workflow, and overall shift performance., • Develop employees and build greater accountability within the team. What Success Looks Like • The night shift consistently meets production expectations., • Employees understand what is expected and are held accountable., • Safety and quality standards are maintained., • Problems are handled quickly rather than left for the following shift., • Production leadership has clear visibility into night-shift performance., • Equipment, staffing, and production issues are escalated appropriately without unnecessary dependence on senior leadership., • The team becomes stronger, more disciplined, and more self-sufficient over time. What You Need • 5+ years of manufacturing, production, or operations leadership experience., • Experience directly managing production employees in a manufacturing environment., • Strong people-management skills with the ability to coach, hold employees accountable, and handle difficult performance situations., • Strong communication, judgment, and problem-solving ability., • Experience managing production goals, quality, safety, staffing, and day-to-day execution., • Ability to independently lead a night-shift operation., • Comfortable working around CNC machinery, automated equipment, or other production equipment. Preferred, Not Required • CNC manufacturing experience., • Cabinet, woodworking, automotive, metal fabrication, plastics, or other high-volume manufacturing experience., • Lean manufacturing or continuous improvement experience., • Bilingual English/Spanish. Email Resume: ahuva@maiplacement.com

Job Description ESTIMATED SALARY RANGE: $140K to $160K STATUS: Full-Time REPORTS TO: Production General Manager FLSA: Exempt SUPERVISORY RESPONSIBILITIES: QC/QA Supervisors and four QC Technicians. SUMMARY: Develops, implements, and manages quality control and quality assurance systems to ensure continuous production of quality products, that meet company, customers and applicable regulatory requirements. Plans and directs activities related to meeting quality standards of product. Recommends processes for continuous improvement in order to prevent or eliminate defects in new or existing products. Plans and directs activities concerned with development, application, and maintenance of quality standards. Manages Quality Management Systems, applicable NSF, UL, and other third-party certification programs. Manages all IS0 9001 activities. EDUCATION/QUALIFICATIONS: Bachelor’s Degree (B.A.) in Chemistry, Polymer Science, Chemical Engineering, Material Science or equivalent combination of education and relevant experience. Seven to ten years’ experience in quality control or quality assurance in a manufacturing environment required. Including three to five years’ managerial experience required. Experience in managing ISO 9001 systems and supporting or leading NSF, UL, customers, or comparable third-party certifications audits is highly preferred. Experience in plastics, polymer compounding, PVC compounding, or a closely related process- manufacturing industry is strongly preferred. REQUIRED SKILLS/ABILITIES 1. Ability to read complex defect data and trace their root cause in order to implement corrective action. 1. Supports company Environmental, Health Safety (EHS) and quality initiatives and ensure that all Quality Department activities are conducted in compliance with applicable company environmental health and safety requirements. 1. Excellent interpersonal communication (verbal/written/presentation) skills with ability to effectively communicate with all levels of the organization. 1. Proficient in time management with ability to work under pressure and meet deadlines., 2. Advanced proficiency with Microsoft Excel and in other Microsoft Office 365 applications., 3. Ability to build a culture committed to high standards., 4. Ability to pay attention to details, keen observation to spot subtle flaws or process inconsistencies before they escalate. 1. Ability to create and maintain a culture that embraces and promotes goal attainment, teamwork, mutual respect, and trust. 1. Ability to train, guide teams, delegate tasks, promote and maintain a positive relationship and positive communication between all team members. 1. Ability to identify, develop and implement solutions to a variety of complex problems., 2. Promote quality achievements and performance improvement throughout the organization in collaboration with respected managers. 1. Capability to develop and monitor organizational KPI’s., 2. Skill to utilize lean manufacturing concepts and/or six sigma for project implementation., 3. Skill to drive personal accountability at every level of the organization. Excellent Benefit Package  Time Off – Vacation/Holidays  Health and Vision Insurance  Dental Insurance  Short-term Disability and Long-term Disability Insurance  Life Insurance  K125 Plan  401K Plan with Company Matching  Flexible Spending Account (FSA)  Tuition Reimbursement  Incentive Bonus Potential which is part of the total cash compensation package. We encourage anyone who is interested in this job opportunity to apply. If you believe you have the skills and experience for this role, please submit in writing to Karen Kuder, HR Manager, by Friday, October 2, 2026. Also, please explain why you are interested in this position. Please contact Karen Kuder if you have any questions about the position or process. As an Equal Opportunity Employer, we are committed to a diverse workforce. \nCompany Description Rimtec Corporation, a PVC Compounding Manufacturer located in Burlington, NJ., has openings in our Maintenance Department. Rimtec Corporation is a subsidiary of Riken Americas Corporation and a premier leader in the PVC industry. Rimtec Corporation, a PVC Compounding Manufacturer located in Burlington, NJ., has openings in our Maintenance Department. Rimtec Corporation is a subsidiary of Riken Americas Corporation and a premier leader in the PVC industry.

Job DescriptionCompany Description At Allergan Aesthetics, an AbbVie company, we develop, manufacture, and market a portfolio of leading aesthetics brands and products. Our aesthetics portfolio includes facial injectables, body contouring, plastics, skin care, and more. Our goal is to consistently provide our customers with innovation, education, exceptional service, and a commitment to excellence, all with a personal touch. For more information, visit https://global.allerganaesthetics.com/. Follow Allergan Aesthetics on LinkedIn. Job Description The Marketing Operations Manager works cross-functionally to project manage the review process for advertising and promotional materials for approved drug and/or device products. In addition, the Manager is responsible for identifying and leading specific Marketing Operations function(s) and/or special projects, required to achieve the designated brand(s) objectives. The Manager act as a Marketing Operations subject matter expert for the PRC review process and is responsible for ensuring the process efficiency involving Medical, Legal, Regulatory, and Compliance teams, while conforming with company policies and procedures. PRIMARY JOB RESPONSIBILITIES: • Lead and manage cross-functional promotional review (PRC) meetings. Build and manage meeting agendas as a partner to Marketing and facilitate meetings while memorializing PRC reviewer comments and job requirements. The Manager is also responsible for monitoring and optimizing the promotional review process of assigned brands. Manage all meeting logistics, including scheduling, on designated brands, working independently on all aspects of both offline and live reviews to help achieve the brand key milestones and objectives., • Manage key function(s) of the review process for assigned brand(s). The Manager will become a trusted partner responsible for performing other Marketing Operations function(s) (i.e. Editorial Review, Print Production, Electronic System Administration, etc.) in support of the assigned brand(s). Works closely with Brand Marketing, the PRC Committee, Compliance, and the rest of Marketing Operations, to proactively identify and resolve issues and ensure reviews are efficiently completed throughout various stages of the process. The Manager will utilize system and reporting to effectively communicate and actively manage jobs with Brand/Project originators., • Enable best practices and SOP conformance. Incorporate best practices and insights to help develop high-quality jobs. Ensure jobs adhere to company policies and FDA guidance. The Manager also ensures that all SOP requirements are met. Provides guidance and training as required to all PRC participants., • Interface with Editorial, Production and Regulatory team members to assist with system execution of submission processes. The Manager is knowledgeable in each area to help with timely submissions and execution to ensure potential issues are resolved for overall achievement of deadlines (Proofing requirements, Regulatory Affairs return of jobs, 2253 submission to OPDP, etc.)., • Lead Special Projects for the assigned Brand(s)/Team. As the promotional review subject matter expert, the Manager is responsible for partnering with the assigned commercial team to identify and lead special projects to help optimize the efficiency of the promotional review process and materials management of the assigned brand(s) (i.e. Claims Library, Template development, etc.). Required to work in collaboration with Marketing Operations, BTS and respective Brand team(s). Accountable for owning and monitoring the performance of the materials review process and identify areas of opportunities and innovation to driver further efficiencies.Qualifications, • Experience working in a pharmaceutical or healthcare advertising environment., • Familiarity with promotional review systems such as Veeva strongly preferred., • Moderate to Advanced Microsoft Skills (Outlook, Excel, Word, PPT), • Experience with editing helpful, • Excellent interpersonal and collaboration skills, • Strong project management skills, • Knowledge of FDA regulations for pharmaceutical advertising and promotion, • Strong presentation and meeting facilitation skills, • Bachelor’s Degree and minimum of 5 years of experience Additional Information Applicable only to applicants applying to a position in any location with pay disclosure requirements under state or local law: • The compensation range described below is the range of possible base pay compensation that the Company believes in good faith it will pay for this role at the time of this posting based on the job grade for this position. Individual compensation paid within this range will depend on many factors including geographic location, and we may ultimately pay more or less than the posted range. This range may be modified in the future., • We offer a comprehensive package of benefits including paid time off (vacation, holidays, sick), medical/dental/vision insurance and 401(k) to eligible employees., • This job is eligible to participate in our short-term incentive programs. Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, incentive, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole and absolute discretion unless and until paid and may be modified at the Company’s sole and absolute discretion, consistent with applicable law. AbbVie is an equal opportunity employer and is committed to operating with integrity, driving innovation, transforming lives and serving our community. Equal Opportunity Employer/Veterans/Disabled. US & Puerto Rico only - to learn more, visit https://www.abbvie.com/join-us/equal-employment-opportunity-employer.html US & Puerto Rico applicants seeking a reasonable accommodation, click here to learn more: https://www.abbvie.com/join-us/reasonable-accommodations.html AbbVie is an equal opportunity employer and is committed to operating with integrity, driving innovation, transforming lives and serving our community. Equal Opportunity Employer/Veterans/Disabled. US & Puerto Rico only - to learn more, visit https://www.abbvie.com/join-us/equal-employment-opportunity-employer.html US & Puerto Rico applicants seeking a reasonable accommodation, click here to learn more: https://www.abbvie.com/join-us/reasonable-accommodations.html

Job Description Location: NYC Joint & Spine Center- Englewood Address: 34 S Dean Street, Suite 201, Englewood, NJ 07631 Website: https://nycjointspine.com/ NYC Joint & Spine Center is a leading outpatient surgical facility focused on orthopedic, spine, plastics, podiatry and total joint care. With two well-equipped operating rooms and a collaborative clinical environment, our team delivers efficient, patient-centered care for individuals seeking high-quality surgical treatment close to home. Location is in partnership with Compass Surgical Partners, an ASC Management organization. Role Summary: The Radiologic Technologist is responsible for performing high-quality intraoperative fluoroscopic imaging using C-arm technology in support of outpatient surgical procedures. This team-oriented role also supports preoperative assessments, ensures equipment calibration, and maintains detailed documentation of all C-arm procedures, contributing to patient safety and surgical efficiency across 2 operating rooms. PRN Hours During: • Monday–Friday, • No nights, weekends, holidays, or call What You’ll Do • Perform fluoroscopy (C-arm) procedures during surgeries in accordance with physician requirements and safety standards, • Assist in preoperative assessment and setup related to imaging needs., • Ensure all equipment is properly calibrated and maintained., • Maintain accurate logs of all C-arm procedures., • Monitor and enforce radiation safety protocols for patients and staff., • Collaborate with surgeons, nurses, and the perioperative team to support surgical outcomes., • Participate in quality improvement and safety initiatives., • Respond to emergency situations with competence and composure., • Contribute to the overall patient experience with a focus on respect, safety, and compassion. What You’ll bring: • Associate’s Degree in Applied Science (Radiologic Technology) or equivalent., • A.A.R.T. certification and current BLS certification required., • Minimum of 6 months of radiologic experience (2+ years preferred)., • Experience in a surgical or outpatient setting is a plus., • Proficiency with Microsoft Windows and EMR systems., • Excellent interpersonal, organizational, and communication skills. Compensation: The actual hourly rate offered will be based on experience, education, and relevant background. Why Compass Surgical Partners? Compass Surgical Partners is a leading, independent, full-service ambulatory surgery center (ASC) development and management partner. An exclusive partner for premier health systems, Compass has built a nationwide portfolio of ASC joint ventures with health systems and physicians. Compass’ experienced leadership team has developed more than 250 ASCs over the past three decades, making it the partner of choice for high-performance ASCs. Differentiated by a proven track record of success and an agile, aligned operating model, Compass Surgical Partners aims to create strong partnerships that improve the lives of patients and providers. Learn more at www.compass-sp.com. Compass Surgical Partners is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability status, or any other characteristic protected by applicable law. If you require reasonable accommodations during the application or hiring process, please contact us directly at info@compass-sp.com.

Job Description Position Summary The Orthotist/Prosthetist Lab Technician is responsible for the technical fabrication, assembly, maintenance, and repair of orthotic and prosthetic devices under the guidance of a certified Orthotist or Prosthetist. This role is hands-on, requiring expertise in working with a variety of materials, tools, and equipment to ensure devices meet patient specifications, functional standards, and quality requirements. Key Responsibilities Fabrication & Assembly Manufacture orthotic and prosthetic components based on prescriptions, technical drawings, or digital designs. Use hand tools, power tools, and specialized equipment (e.g., vacuum forming, laminating, 3D printing) to create and finish devices. Shape, grind, and polish materials such as plastics, metals, composites, and foams. Repair & Modification Inspect, adjust, and repair existing devices to maintain proper fit and function. Modify devices as needed to meet patient needs or clinical specifications. Quality Control Check all devices for accuracy, durability, and compliance with safety standards. Maintain clean, organized, and safe workspaces in accordance with OSHA and facility guidelines. Collaboration Work closely with Orthotists, Prosthetists, and clinicians to ensure the finished device meets clinical intent. Communicate fabrication progress, challenges, and timelines effectively. Inventory & Equipment Maintenance Monitor supply levels for materials and order replacements as needed. Perform basic maintenance and calibration of fabrication equipment. Qualifications Education: High school diploma or equivalent; technical training in orthotics/prosthetics fabrication preferred. Experience: 1–3 years of experience in an orthotic/prosthetic lab or similar fabrication environment preferred. Skills: Proficient in working with hand and power tools. Understanding of material properties and fabrication techniques. Strong attention to detail and ability to follow technical specifications. Good communication and teamwork skills. Work Environment Primarily in a fabrication laboratory setting. May involve exposure to dust, fumes, and noise from tools and machinery. Occasional lifting of heavy materials or devices.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview We are seeking an experienced and quality-driven Senior Machinist to program, operate, set up, and maintain our machine shop operations as we pioneer next-generation fusion energy technology. In this hands-on role, you will bridge the gap between rapid R&D prototyping and small-run production, operating both manual equipment and 3-axis CNC machines to fabricate high-precision components. You will be responsible for end-to-end machining execution—from reading complex technical drawings and programming toolpaths using High-Efficiency Machining techniques to performing setup, quality inspection, and routine CNC equipment troubleshooting. Working directly alongside engineering and production teams in a fast-paced environment, you will optimize workflows and contribute directly to building zero-emission stellarator architectures. Key Responsibility Areas: • Operate and maintain the machine shop including CNC machines, manual machines, and basic metrology equipment to produce high-quality precision components according to engineering specifications., • Set up CNC machines, including tooling, fixtures, and programming, to ensure efficient and accurate production runs., • Set up workflows and tooling to enable switching from production to one-of-a-kind parts., • Read and interpret blueprints, schematics, and technical drawings to understand machining requirements including GD&T., • Perform routine maintenance and troubleshooting of CNC equipment to ensure optimal performance and minimize downtime. Work with outside vendors when necessary., • Conduct quality inspections using precision measurement tools to verify part dimensions and tolerances., • Adhere to safety procedures and regulations to maintain a safe working environment for yourself and others., • Collaborate with engineering and production teams to optimize manufacturing processes and improve productivity. Required Experience & Skillsets: • 8+ years of experience operating 3-axis CNC machines in a manufacturing environment., • Experience in a prototyping setting, • Knowledge of HEM machining and tooling techniques, • Hands-on experience with manual machines such as Lathes and Mills., • Proficiency in CNC machine setup, programming, and operation, with a strong understanding of machining principles., • Ability to read and interpret blueprints, technical drawings, and geometric dimensions and tolerances (GD&T)., • Experience with precision measurement tools such as calipers, micrometers, and height gauges., • Strong problem-solving skills and attention to detail to identify and resolve machining issues., • Excellent communication skills to collaborate effectively with team members and convey technical information., • Demonstrated ability to work independently and prioritize tasks in a fast-paced production environment., • Commitment to safety protocols and practices to ensure a safe working environment. Desired Qualifications: • Certification or formal training in machining or related fields., • Experience with Fusion 360 CAD/CAM software for CNC programming., • Familiarity with a variety of machining materials, including steel, copper, nickel alloys, plastics, and composites., • Knowledge of additional machining processes such as milling, turning, drilling, and grinding., • Willingness to cross-train and learn new technologies and machining techniques. Company BenefitsCompany Benefits: • Base Pay: $32.00 – $52.00+ per hour (Non-Exempt / OT Eligible), • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTO It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Company parties, • Competitive salary, • Dental insurance, • Employee discounts, • Health insurance, • Paid time off, • Profit sharing, • Training & development, • Vision insurance Job Description Full-Time Anesthesiologist needed in Ulster County to join our team! Competitive salary and benefits package! Summary: • Enjoy the stability of a “weekly schedule” model in a growing network • Join a professional team of Physicians and CRNA's • Reimbursement for professional licenses and certifications. • Wide variety of procedures in both hospital and ambulatory settings • State-of-the-art operating rooms and equipment • A team-based approach to providing exceptional patient care • The stability, resources, and support of a growing health care network • Affordable housing in the upper Hudson Valley • Premium benefits package available Responsibilities: • Anesthesiologist role is based in Poughkeepsie & Kingston, NY, • General, ENT, breast, ortho, ophthalmology, plastics, podiatry, urology, vascular, neuro, OB/GYN, bariatrics, thoracic, gastro, colorectal, endo, Requirements: • M.D. / D.O. Degree from an accredited College of Medicine · Active NY State Medical License | DEA • Board certification | Board eligible if in process, • Candidate must possess excellent clinical, communication, and interpersonal skills · ACLS | PALS Compensation & Benefits: • Compensation: $320,000 - $450,000 annually or for a 1099 = $250-300/hr + additional earning opportunities, • Health | Dental | Vision | Life | Disability | Malpractice (W2 only), • 401(k) & profit sharing | Health Care spending accounts (W2 only), • Paid time off (W2 only), • W2 or PC (1099) options About Singular Anesthesia Services, PLLC Founded, owned and operated by Board Certified Physician Anesthesiologists since 2015, Singular (www.singularanesthesia.com) provides a turnkey, solutions-based approach to anesthesia management so patients can get the best care possible. We welcome and encourage applicants of all races, colors, genders, religions, sexual orientations, national origins, and disabilities, as well as those who have served. What Singular Offers: • Flexibility & Assured Work-Life Balance: Enjoy flexible scheduling & PTO ensuring both your professional success and personal well-being., • Leadership Support: Our team is available 24/7, always ready to provide assistance and guidance, ensuring your continued success. · Commitment to Continued Professional Development: we’re committed to your growth, to keep you at the forefront of anesthesia advancements. At Singular, our emphasis on education & certifications provides seamless access to courses. We offer reimbursement for your professional licenses and certifications. This ensures that our employees can efficiently and easily fulfill their continuing education requirements.

Job Description Who You Are: Embark on a serene journey as a Part-Time Beauty Host with L’Occitane at our Riverside Square boutique. Where your expertise will not only enhance the physical beauty of our customers but also engage their senses in a tranquil experience. We are seeking an individual passionate about creating a sensory oasis within our beauty space. You will choreograph an experience that lingers in the memory of everyone entering our iconic yellow doors. The Fundamentals of What You’ll Do: • Be the Host: Greet every guest as if they were a cherished guest in your home, extending warm hospitality and offering a sensorial experience that fosters genuine connections., • Prioritize Guest Experience: Anticipate the needs of your guests and strive to exceed their expectations., • Keep an Open Mind: Welcome feedback openly, presume positive intentions, and maintain a growth-oriented mindset., • Let Success Drive You: Support & assist with all store operations, policies, and procedures, you are encouraged to take the initiative by solving problems and putting the customers’ needs first., • Foster a Team Culture: Offer direction, mentorship, and encouragement to your colleagues cultivating a team culture that is both positive and inclusive., • Communicate with Care: Collaborate and be varied with communication styles as well as individual personalities within the team. We value hearing from individuals who possess: • Strong communication skills and creative problem-solving ability., • Entrepreneurial attitude with a background in a sales-driven environment, • Mindset focused on customer satisfaction (internal and external customers), • Interest in skincare, body care and fragrance is beneficial., • Adaptability and flexibility are recommended, • Basic Technology Skills We welcome talent with diverse experiences, ideas, and skills. We value your mindset over skills, skills are trainable. We are committed to the Planet. We contribute to the company's waste reduction targets through their support of related in-store initiatives, such as our in-store recycling program, following inventory management guidelines to reduce product waste, and eliminating the purchase of single-use plastics, as well as by promoting our refill products to heat targets. The pay range for this position is $16.46 - $18.93 per hour (depending on skills and experience) All Applicants: L'Occitane's Privacy Statement United States Applicants Only: Employee Rights FMLA: Posters FMLA Special Rules for Returning Military Members (USERRA) Powered by JazzHR HDvCQ4hzjz