Trabajos product engineer en Rochester, New YorkCrear alertas

Introduction \n Visium Resources has been asked to identify qualified candidates for this Senior Software Verification and Validation Engineer position. This position is a direct hire opportunity which is expected to be on-site at clients facility in Rochester, New York. Laboratory / Testing Commitment: Approximately 70% hands-on testing and validation activities. \n \n Summary \n We are seeking an experienced Senior Software Verification and Validation (V&V) Engineer to support the development, integration, verification, and validation of medical devices, diagnostic systems, laboratory instrumentation, and associated software. The ideal candidate will have strong experience working in a regulated medical device, diagnostic, laboratory, or life sciences environment, with a background in software and system verification and validation. \n \n This position will support new product development, software and instrument integration, technology transfer, system-level verification, software validation, and post-launch product support. The engineer will work across hardware, software, systems, laboratory, quality, and engineering functions throughout the product development life cycle. \n \n This is a hands-on V&V position, not a role focused solely on writing test documentation. Approximately 70% of the position will involve hands-on testing, system/software validation, troubleshooting, and laboratory activities. \n \n Medical Device V&V \n Candidates should understand the principles of verification and validation within a regulated medical device or diagnostic development environment. \n Experience with the following is highly desirable: \n\n • Design verification\n, • Design validation\n, • Software validation\n, • Requirements management\n, • Traceability\n, • Risk-based verification\n, • Test protocol development\n, • Test execution\n, • Defect management\n, • Change control\n, • Configuration management\n, • Design controls\n, • Product development life cycle processes\n, • Post-market or post-launch product support\n\n \n Key Responsibilities \n\n • Develop and execute verification and validation strategies for medical devices, diagnostic systems, laboratory instruments, and associated software.\n, • Develop and execute software and system-level test plans, test protocols, test cases, and test procedures.\n, • Perform verification and validation throughout the medical device/product development life cycle.\n, • Translate system, software, and user requirements into measurable verification and validation activities.\n, • Establish and maintain requirements traceability between requirements, risk controls, test cases, test execution, and test results.\n, • Perform hands-on testing of integrated medical device systems, instrumentation, software, and subsystems.\n, • Execute software validation testing, including functional, system, integration, regression, and negative testing as appropriate.\n, • Evaluate software/hardware interfaces and system integration to identify unexpected behavior, defects, or performance issues.\n, • Document test results, deviations, anomalies, defects, and conclusions in accordance with established quality procedures.\n, • Troubleshoot failures and unexpected test results and work with engineering and software development teams to identify root causes and corrective actions.\n, • Participate in defect investigation, resolution, retesting, and regression testing.\n, • Support design verification, subsystem validation, system validation, and post-launch product support.\n, • Generate and review requirements, specifications, test procedures, protocols, and validation documentation for completeness and technical accuracy.\n, • Review the work of other engineers and provide feedback regarding testing quality, documentation, and requirements traceability.\n, • Support technology transfer and new product introduction activities.\n, • Work with multidisciplinary teams consisting of software, systems, electrical, mechanical, laboratory, quality, regulatory, and product development personnel.\n, • Support configuration and installation of software and computer systems used in testing.\n, • Participate in software/test automation activities where appropriate.\n, • Develop or utilize scripts to support automated testing, data collection, test execution, and analysis.\n, • Adapt quickly to changing project priorities and support multiple projects as required.\n\n \n Software Verification & Validation \n Experience working with software embedded in or supporting medical devices, diagnostic instruments, laboratory systems, or regulated equipment is highly desirable. The successful candidate should have experience with software verification and validation within a regulated product development environment. Experience may include: \n\n • Software requirements verification\n, • Software functional testing\n, • System integration testing\n, • System-level verification\n, • Software validation\n, • Regression testing\n, • User requirements verification\n, • Interface testing\n, • Installation and configuration testing\n, • Automated testing\n, • Defect identification and tracking\n, • Test script development\n, • Test execution and results analysis\n, • Requirements traceability\n, • Risk-based testing\n, • Software/hardware integration testing\n\n \n Required Qualifications \n Education \n\n • Bachelor's degree or higher in Systems Engineering, Software Engineering, Computer Science, Electrical Engineering, Mechanical Engineering, Biomedical Engineering, or a related engineering/science discipline.\n, • Equivalent combination of education and directly relevant experience may be considered.\n\n \n Experience \n\n • Typically 15+ years of relevant engineering, software V&V, systems V&V, medical device validation, or regulated product development experience; candidates with strong directly applicable experience may be considered with fewer years.\n, • Demonstrated experience with medical device, diagnostic, laboratory, or other regulated products.\n, • Experience developing and executing verification and validation testing.\n, • Experience creating and maintaining requirements traceability.\n, • Experience working within a structured product development and quality environment.\n, • Experience troubleshooting complex software/hardware systems.\n\n \n Technical Skills \n\n • Strong understanding of software verification and validation methodologies.\n, • Strong understanding of system-level verification and validation.\n, • Experience translating requirements into testable acceptance criteria and test cases.\n, • Strong technical documentation skills.\n, • Strong analytical and troubleshooting abilities.\n, • Experience with software and system integration testing.\n, • Experience with test automation and/or automated data collection.\n, • Basic programming or scripting experience using technologies such as:\n, • Python\n, • VBA\n, • C/C++\n, • Other scripting or programming languages\n, • Experience configuring and installing computer systems and software used for testing.\n, • Understanding of cybersecurity considerations within medical devices, laboratory systems, or connected equipment is beneficial.\n\n \n V&V / Quality Systems Experience \n Experience with regulated development processes and quality systems is highly desirable, including familiarity with: \n\n • Medical device design controls\n, • Software development life cycle processes\n, • Requirements management\n, • Risk management\n, • Configuration management\n, • Change control\n, • Defect management\n, • Traceability\n, • Verification and validation documentation\n, • Quality management systems\n, • Regulated product development\n\n \n Development & Quality Tools \n Experience with one or more of the following is preferred: \n\n • Jira\n, • Windchill\n, • HP ALM / Quality Center\n, • Serena Business Mashups\n, • Aligned Elements\n, • Microsoft Team Foundation Server (TFS)\n\n \n Preferred Qualifications \n\n • Experience with medical device software validation.\n, • Experience validating software embedded within medical devices or diagnostic instruments.\n, • Experience with laboratory information systems, diagnostic systems, or laboratory automation.\n, • Experience with clinical or diagnostic analyzers.\n, • Experience with automated laboratory analyzers, including VITROS® systems, is a plus.\n, • Experience with software test automation.\n, • Experience with Python, VBA, C/C++, or similar programming/scripting languages.\n, • Experience with assay/instrument integration.\n, • Experience supporting technology transfer or new product introduction.\n, • Experience working in a regulated medical device, diagnostics, or life sciences environment.\n\n \n Key Attributes \n The successful candidate will be: \n\n • Hands-on: Comfortable spending significant time executing tests rather than working exclusively on documentation.\n, • Technically strong: Able to understand interactions between software, hardware, instrumentation, and systems.\n, • Detail-oriented: Able to produce accurate, audit-ready V&V documentation and maintain rigorous traceability.\n, • Analytical: Able to investigate failures, identify potential root causes, and work with development teams toward resolution.\n, • Adaptable: Comfortable moving between projects as priorities change.\n, • Collaborative: Able to work effectively with software, systems, engineering, quality, laboratory, and regulatory teams.\n, • Independent: Capable of developing and executing V&V activities with appropriate judgment and minimal supervision.\n\n \n Work Environment \n This is a full-time, onsite position in the Rochester, NY area. Candidates must be willing and able to commute to the facility daily. Approximately 70% of the role will involve hands-on testing and validation activities, with the remainder involving test planning, requirements review, documentation, data analysis, defect investigation, meetings, and cross-functional engineering activities. \n \n Ideal Candidate Profile \n The ideal candidate is a senior-level Medical Device V&V Engineer, Software Validation Engineer, Software V&V Engineer, Systems V&V Engineer, or Medical Device Systems Engineer who has experience validating software and integrated systems within a regulated product development environment. \n \n Strong candidates may come from backgrounds including: \n\n • Medical devices\n, • Diagnostic instrumentation\n, • Clinical laboratory systems\n, • Laboratory automation\n, • Embedded medical device software\n, • Regulated electromechanical systems\n\n \n Candidates should be able to demonstrate hands-on experience developing and executing V&V testing-not simply writing test cases or managing V&V documentation.

The Mechanical Engineer is responsible for all aspects of system design, build, debug, and installation support. This includes mechanical design, 3D modeling, drawing package creation and approval, build support, robot and PLC programmer assistance, process development and improvement, and startup of industrial automation systems. \n \n Locations: Rochester, NY or Painted Post, NY \n \n \n Key Job Responsibilities \n \n Design & Development \n\n • Develop 3D models and design layouts for industrial automation systems\n, • Create 2D drawings for fabrication as needed to support project schedule or complexity\n, • Review and approve detail drawings created by the drafting/detailing team for accuracy and completeness prior to release\n, • Research and source components, obtaining quotes and specifications from vendors\n, • Develop and maintain accurate bills of materials from drawing packages\n, • Perform engineering calculations to size system components per client specifications and industry standards\n, • Apply knowledge of design principles (Design for Assembly, Design for Manufacturability, etc)\n, • Evaluate project and design feasibility, including engineering analyses (classical mechanics, simulations, etc), time studies, and cost analysis\n\n Integration & Support \n\n • Assist PLC and Robot Programmers during system build, startup, and debugging\n, • Account for controls systems and how they interact with mechanical design\n, • Support installation, startup, and troubleshooting activities at customer sites\n\n Process & Management \n\n • Stay up to date with emerging automation technologies and apply where needed\n, • Participate in system risk assessments (safety, process risk assessment)\n, • Attend and contribute to internal and external design reviews\n, • Promote engineering solutions that align with technical and budgetary constraints\n, • Adhere to project schedules & manage priorities within multiple projects in various phases\n, • Ensure adherence to company standards and best practices\n\n Collaboration & Leadership \n\n • Work closely with project managers and customers throughout project lifecycle\n, • Collaborate with multidisciplinary teams to develop integrated automation solutions\n, • Assume the role of project Technical Lead when required\n, • Support overall organizational growth initiatives\n\n \n \n \n Education & Experience \n\n • B.S. Degree in Mechanical Engineering or equivalent experience\n, • 5-10 years of experience in automation design\n\n \n \n \n Skills & Competencies \n\n • Strong mechanical troubleshooting and problem-solving skills\n, • Ability to work independently and within a team environment\n, • Effective written and verbal communication skills\n, • Strong organizational and project task management abilities\n, • Willingness to travel occasionally (5%) to customer sites and other company locations\n\n \n \n \n Technical Proficiency \n\n • Design Software: Autodesk Inventor (preferred); SolidWorks experience also considered; AutoCAD 2D; Autodesk Vault (product data management); HyCAD (a plus)\n, • General software: Microsoft Office products\n, • Software Applications: Encompix ERP (a plus)\n\n \n \n \n Expertise in Machine Systems \n\n • Sequential part assembly and processing\n, • Drivetrain and actuators\n, • Robots and end-of-arm tools\n, • Part fixturing\n, • Conveyors & material handling\n, • Palletizing systems\n, • Forging processes\n, • End-of-line packaging\n, • Machine safety\n\n \n \n \n In compliance with pay transparency requirements, the wage range for this role is $95,000 - $115,000 hour. The rate range provided is a general guideline. When extending an offer, Adaptec Solutions considers factors including but not limited to experience and geographic location. Adaptec Solutions also offers a variety of benefits including generous paid time off (PTO), 11 paid company holidays including your birthday, generous health plans, dental and vision insurance, HSA/FSA accounts, generous 401(k) match and immediate vesting, short-term/long term disability coverage and basic life/AD&D insurance and education assistance. \n \n \n \n Adaptec Solutions, LLC is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state or local law.

Job DescriptionSENIOR EMBEDDED SOFTWARE ENGINEER Department: Product Design Services FLSA Status: Exempt Reports to: Operations Manager Pay Range: $93,000 - $125,000 annually Location: Rochester, NY The Role: D3 Embedded is seeking an experienced Senior Embedded Software Engineer to lead the design, development, and optimization of software for embedded systems. This role involves architecting and implementing firmware solutions, debugging complex system issues, and ensuring high performance and reliability. The ideal candidate has extensive experience with embedded C/C++, real-time operating systems (RTOS), Linux operating systems (Ubuntu, Yocto, etc), microcontroller architectures, System on Chip SoC architectures, and low-level hardware interactions. Strong problem-solving skills, leadership traits, and the ability to mentor junior engineers are essential. This position plays a critical role in driving innovation and advancing embedded technology in our products. The Responsibilities: • All phases of the product development cycle including:, • requirements definition and architecture, • software design and development, • Software implementation, • hardware bring-up, software/hardware integration, • verification and validation, and customer support, • Embedded processors running real-time operating systems or Embedded Linux on custom electronics., • Technical tasks including;, • assisting with board bring-up, • developing driver and application-level code, • system verification, • Conduct and oversee code reviews, unit testing, debugging, and software/hardware integration., • Technical direction and leadership in a non-supervisory capacity for complex engineering projects, • Support project planning efforts including task definition and work effort., • Develop and evaluate plans and criteria for various projects and activities you will do., • Embedded Linux platforms, • Open-source Linux and associated SDKs, • GCC/GNU toolchain, • Developing & identifying tools / methods for better design reuse & process improvement, • Design reviews and technical oversight, • Coaching & mentoring less experienced engineers Additional Responsibilities: Other duties as assigned The Right Person Will Have: • Bachelor of Science in Computer Science, Computer Engineering, Electrical Engineering discipline and/or equivalent years of experience, • Minimum 5 years of experience in Embedded Software role, • Excellent problem solving & troubleshooting skills., • Ability to read schematics and debug digital hardware using oscilloscope, logic analyzer, or similar tools for troubleshooting., • Experience writing embedded device drivers, • Experience debugging embedded platforms, • Knowledge of embedded software and firmware development, including C and C++., • Up to date experience with Embedded Linux platforms, configuration, board support package, kernel drivers, and device tree, • Experience using GIT version control system, • Experience developing with GCC/GNU toolchain, • Experience with embedded camera and video processing is desirable., • Self-Driven personality, • Capable of a big picture, system-oriented approach, • Solid technical leadership skills, • Strong communication and interpersonal skills. The Benefits: • Competitive total compensation, • Medical and dental coverage, • Employer paid basic life, short-term disability, and identity theft coverage, • Voluntary vision, life, long-term disability, accident, critical illness coverage, • 401k retirement contribution, • Paid holidays, time-off, and sick time, • Tuition assistance and employer paid professional development, • Flexible work schedules, • Remote opportunities available, • Complimentary snacks and beverages, • Employer sponsored social events The Company: Since our founding in 1999, D3 Embedded has driven innovation in high-performance embedded systems development. We leverage our expertise in autonomous machines, sensors, imaging, optics, edge computing, algorithms, robotics, and electrification to provide cutting-edge engineering design and low-volume manufacturing services. Headquartered in Rochester NY, we serve a global network of customers and are proudly connected with many technology leaders and Fortune 500 companies. We are interested in bright, creative, and team-oriented individuals exhilarated by the opportunity to transform the world through frontier technologies. Candidates must be eligible to work in the United States. D3 Embedded does not sponsor visas. For more information about D3 Embedded, please visit www.d3embedded.com. D3 Embedded is committed to fostering a diverse work environment and proud to be an Equal Opportunity Employer. We consider and hire applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, or membership in any other group protected by federal, state or local law. D3 Embedded participates in E-Verify, a federal program that confirms employment eligibility upon hire. Powered by JazzHR 25T2NSJnxs

Job DescriptionElectrical/Controls Engineer Job Title: Electrical/Controls Engineer Date: 2/29/2026 Location: Rochester, NY Job Description: We are part of the world wide GH Group in Rochester, New York that supplies integrated induction heating systems worldwide. We are looking for an Electrical/Controls Engineer with controls systems design experience to join our team. Responsibilities include electrical schematics, electrical hardware specification, controls/interface programming, and communicating with both customers and vendors. Individual needs to be a motivated team player with excellent problem solving, communication, and interpersonal skills. Paying 65K-100K per year depending on experience. Responsibilities: · Prepare electrical schematics, including panel layouts and bill of materials. · Size equipment such as drives, relays, power supplies and contactors. · Prepare data sheets, Order of Operation and other documentation on equipment. · Obtain technical information from equipment suppliers. · Recommend creative, technically feasible solutions that satisfy customer needs, while adhering to engineering standards and strategic direction. · Evaluate state-of-the-art technological developments in various controls systems, and apply the latest advances. · Apply engineering techniques in designing a control system that is reliable, serviceable, energy efficient and competitive. · Interface with Sales, Mechanical, Machine Shop, Build, Service, personnel as well as a multi-tier supplier base. · Work with in worldwide product regulation and compliance to design systems that meet both customer and government regulations, restrictions and codes. · Strive for continuous improvement in both processes and products. Requirements: · Minimum Education Associates Electrical Engineering/Technology · Strong troubleshooting and analytical problem solving skills · Proficient in Microsoft suite of products · Willing to travel when/where required. Desired Knowledge/Skills: · Experience working with PLC from various manufactures such as Allen-Bradly, GE, Wonderware, etc. · Education BS Electrical Engineering or Controls Engineering or Electrical Engineering Technology · General understanding of industrial equipment operations. · 3 years work experience in Electrical/Controls Engineering of industrial systems · Excellent verbal and written communication skills. · Experience with documenting designs, using computer aided design systems, for electrical or mechanical, is strongly preferred. · Experience with EPlan would be a plus GH Induction Atmospheres offers employees a benefit package including medical, 401(k), and profit sharing. Qualified individuals please email resumes to jobs@gh-ia.com for immediate consideration.

Job Description PROCESS ENGINEER Advantech Industries Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. Advantech Industries Inc. is currently recruiting a Process Engineer. DUTIES & RESPONSIBILITIES Under the supervision of the Engineering Manager, the Process Engineer is responsible for developing detailed work instructions for each job, ensuring all products are manufactured in strict accordance with customer-supplied designs and specifications. The Process Engineer works to ensure efficient, accurate, and repeatable production processes while supporting overall quality and operational objectives. SKILLS & QUALIFICATIONS This role requires a strong understanding of a wide range of manufacturing operations, including CNC machining (mills and lathes), sheet metal fabrication (press brakes, lasers, and turret punches), welding, and mechanical assembly. • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Superior communication skills and ability to develop teamwork among staff., • Must be diplomatic and possess good human interaction skills., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Ability to multitask using the appropriate level of priority setting., • Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Thorough operational knowledge and skills of specific equipment to be operated., • Ability to operate assigned equipment safely and efficiently., • Ability to keep record of time spent and material used., • Ability to use precision measuring tools and equipment, read drawings and blueprints, and be familiar with common machine tools., • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals., • High School Diploma or equivalent required., • College degree preferred but not required., • 10 years of machining or manufacturing experience required, with at least three years of job processing experience preferred. JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $70,000 - $92,000 / annual salary. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Gender/Sexual Orientation/Gender Identity/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job DescriptionJob title: Lead, Optical Engineering - Stray Light Job Title: Lead, Optical Engineering - Stray light Job Location: Rochester, NY Job Schedule: 9/80 (Every Other Friday Off!) Job Description: We are seeking a highly motivated Lead Optical Engineer to support the design, analysis, and development of advanced optical and electro-optical systems for aerospace and defense applications. This role is centered on stray light analysis and control methods, with primary responsibilities in optical system modeling, performance analysis, and non-sequential evaluation to ensure mission-critical system performance in challenging operational environments. The position will support active and passive imaging payloads where stray light suppression, radiometric accuracy, and optical performance directly influence mission success. The ideal candidate has a strong background in optical system engineering and experience with complex imaging or sensing systems across design, test, and verification. They will work closely with cross-functional teams including optical, mechanical, electrical, systems, software, and manufacturing engineering to support programs from concept through integration and test. This engineer will help mature payload architectures, evaluate optical trades, and quantify how stray light, throughput, background sources, and image chain behavior affect end-to-end system performance in operational space environments. This role is best suited for someone who combines strong technical knowledge and hardware experience, is comfortable leading complex technical work, and can communicate effectively with internal teams, leadership, suppliers, and customers. Candidates should have experience identifying stray light sources, developing mitigation strategies, and assessing their impact on overall optical system performance. Familiarity with stray light analysis tools such as FRED is highly desirable. Essential Functions: • Lead or support optical engineering activities for advanced imaging, sensing, and electro-optical systems., • Lead development of non-sequential stray light and radiometric models for active and passive imaging systems, including assessment of scattering, ghosting, and optical throughput for space-based payloads., • Support system performance analysis and verification of key optical requirements such as wavefront error, line of sight, distortion, focus, focal length, image quality, and related optical performance metrics., • Perform end-to-end optical performance analyses that connect design features to mission-level image quality, signal-to-noise, and sensitivity outcomes, and communicate resulting risks, margins, and mitigation recommendations to program teams., • Contribute to assessment of optical system behavior including ghosting, scattering, and stray light performance, as needed for system design and verification efforts., • Support design trades for baffles, stops, surface treatments, contamination control, and alignment strategies to reduce stray light and preserve radiometric and optical performance through integration, test, and environmental exposure., • Generate and review technical documentation including test plans, procedures, error budgets, requirements verification artifacts, design review materials, and final reports., • Collaborate with cross-functional engineering teams to ensure optical designs are manufacturable, testable, and fully integrated into the broader system architecture., • Provide technical leadership in troubleshooting, root cause analysis, and resolution of optical performance issues during development and test., • Support hardware builds, laboratory demonstrations, integration efforts, and verification campaigns., • Interface with internal stakeholders, external partners, and suppliers to coordinate technical execution and ensure requirements are clearly understood and met., • Contribute to risk identification, mitigation planning, and continuous improvement of engineering processes and test methods., • Mentor junior engineers and provide guidance in optical analysis, test execution, and engineering best practices. Qualifications: • Bachelor’s Degree and minimum 9 years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience., • 2-3 years of relevant experience in optical stray light analysis tools such as FRED, • Ability to obtain a federal security clearance Preferred Additional Skills: • Holds an active Secret or Top Secret/SCI clearance., • Relevant experience with the design, manufacture, integration, test and sell-off of space-based EO/IR subsystems., • Hands-on experience with optical metrology equipment (interferometers, autocollimators, laser trackers) and phase retrieval techniques., • Familiarity with specialized metrology software, including Zygo Mx and QED.NET., • Experience with the design, manufacture, integration, test, and sell-off of space-based EO/IR subsystems., • Experience with Optical Design software such as CodeV, Zemax OpticStudio, • Ability to collaborate across all levels of leadership., • Work collaboratively with others and complete assignments with a team-oriented approach., • Strong communication and interpersonal skills – taking complex concepts and sharing with others., • Ability to architect an end-to-end space system with a full understanding of the product lifecycle., • Experience with project management aspects of technology development programs., • Experience with estimating and managing costs & creating and managing schedule, • Candidate with an active Top Secret/SCI clearance is highly desirable., • Optical Engineering experience with EO/IR space-based payloads, vehicle systems, and/or high performance imaging systems., • Experience with programming languages such as Matlab and Python, • Working knowledge of optical scatter mechanisms, BSDF/BRDF concepts, ghost path analysis, and the interaction between optical design choices and system-level performance.

Job Description QUALITY ENGINEER Advantech Industries Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. Advantech Industries Inc. is currently recruiting a Quality Engineer to monitor and improve the quality of our operational processes and outputs. DUTIES & RESPONSIBILITIES: The Quality Engineer’s responsibilities include designing quality standards, equipment, process, and products, developing quality control systems, and determining corrective actions. Duties include, but are not limited to, the following: • Review customer quality specification/PO flow downs, codes and technical design documents/drawings to provide an accurate inspection plan., • Participate in contract review meetings to initiate and advise on inspection plans., • Utilize HQA Inspection Manager software to bubble drawings, create FAI reports, and identify critical dimensions to be verified and recorded on an in-process inspection report., • Develop quality plans for manufacturing based on customer RFQ., • Collaborate with operations managers to develop and implement controls and improvements., • Ensure that workflows, processes, and products comply with quality standards and safety regulations., • Investigate and troubleshoot product or production issues., • Develop corrective actions, solutions, and improvements., • Monitor and analyze quality performance., • Update our Quality Management System (QMS) with incidents, fixes and improvements., • Manage calibration system in Inspection Manager Software., • Assign gauging to check critical dimensions., • Work with customers regarding quality questions and issues. SKILLS & QUALIFICATIONS: • Hands on experience with Quality Management Systems (QMS) and testing methodologies., • In-depth understanding of technical documentation., • In-depth understanding of machining and sheet metal fabrication including print reading and GD&T., • Strong analytical and problem-solving skills., • Excellent project management skills., • Solid computer and organizational skills., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Superior communication skills and ability to develop teamwork among staff., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • High School Diploma or equivalent required., • 5 years of experience in Quality Engineering, Quality Assurance, or a similar role., • Additional certification in Quality Assurance is a plus. JOB BENEFITS: • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $25.00 - $35.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full-Time employment

Job Description Job Summary: We are seeking an experienced Optical Metrology Engineer to support the testing, characterization, and validation of precision optical systems and components. The ideal candidate will have extensive hands-on experience with Zygo Max interferometer systems and Modulation Transfer Function (MTF) measurements for evaluating optical performance throughout development and production. Essential Duties and Responsibilities: • Perform interferometric testing using Zygo Max interferometer systems to evaluate optical surface quality, transmitted wavefront error, and system alignment., • Conduct MTF (Modulation Transfer Function) testing to verify optical imaging performance and ensure compliance with customer and engineering specifications., • Develop, optimize, and document optical test procedures for production and engineering environments., • Analyze interferometric data, wavefront measurements, and MTF results to identify optical defects and recommend corrective actions., • Support optical alignment, troubleshooting, and root-cause investigations during prototype and production builds., • Collaborate with optical design, manufacturing, quality, and engineering teams to improve product performance and manufacturing yield., • Maintain calibration and preventive maintenance schedules for optical metrology equipment., • Generate detailed technical reports documenting measurement results, statistical analysis, and product acceptance criteria., • Ensure compliance with ISO, customer, and internal quality standards., • Contributes to assigned special projects that support departmental or organizational objectives., • Completes additional duties assigned to support business needs. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from low, moderate to loud. Education, Skills and Experience: • Bachelor's degree in Optical Engineering, Physics, Mechanical Engineering, or a related technical field., • 3+ years of experience in optical metrology, optical testing, or optical test engineering., • Hands-on experience operating Zygo Max interferometer systems and performing wavefront error analysis, interferometry, MTF measurement and interpretation, optical alignment, and precision optical testing., • Experience using optical metrology and test equipment, including autocollimators, alignment telescopes, collimators, and other precision measurement instruments., • Strong analytical, troubleshooting, and root cause analysis skills, with the ability to identify, diagnose, and resolve optical system performance issues., • Excellent written and verbal communication skills, with the ability to clearly document test results and collaborate across cross-functional teams., • Preferred Qualifications, • Experience with optical manufacturing processes and precision optical assembly., • Familiarity with Zemax, Code V, or equivalent optical design software., • Experience with Statistical Process Control (SPC) and Measurement System Analysis (MSA)., • Programming experience with MATLAB, Python, or LabVIEW to automate optical testing and analyze measurement data., • Knowledge of ISO 10110, MIL specifications, aerospace optical standards, or other industry standards., • Experience with automation and programming, including scripting and integration of metrology systems into automated manufacturing environments

Job Description Why Work at Paylocity Paylocity is an award-winning provider of cloud-based HR and payroll software solutions, offering the most complete platform for the modern workforce. The company has become one of the fastest-growing HCM software providers worldwide by offering an intuitive, easy-to-use product suite that helps businesses automate and streamline HR and payroll processes, attract and retain talent, and build a strong workplace culture. While traditional HR and payroll providers automate basic HR processes such as payroll and benefits administration, Paylocity goes further by developing tools that HR and businesses need to compete for talent and deliver against the expectations of the modern workforce. Early Careers Bring your talent and eagerness to learn to Paylocity, where you’ll discover the skills needed to launch your career! Benefit from award-winning training and one-on-one coaching as you play a key role in Paylocity’s future with an early careers position. Explore how you can go from the classroom to the conference room with internships and new-grad programs at one of Glassdoor's Best Places to Work. Experience the support that’ll take you from grad to a flourishing career with a position in Paylocity’s early careers division! Position Overview Paylocity is growing its Machine Learning Engineering organization. Our Machine Learning Engineering team develops infrastructure and tooling that enable data-driven decisions and AI/ML experiences at scale for millions of Paylocity users. As a Machine Learning Engineer Intern in Product & Technology, you will contribute to well-scoped machine learning engineering work with mentorship and guidance from experienced engineers. You will gain hands-on experience building, testing, and improving ML software, data and modeling pipelines, and supporting infrastructure. You will collaborate closely with Machine Learning Engineers, Data Scientists, Data Engineers, DevOps, and other platform teams to learn how reliable ML solutions are designed and delivered in production environments. This internship is designed as a learning experience: you are not expected to independently own production systems or architecture. Instead, you will work on meaningful scoped projects, ask questions, incorporate feedback, and develop the engineering judgment needed for an early-career Machine Learning Engineer. In-Office: This role is intended to be based in Rochester, New York. Interns are expected to work on-site in the designated office environment and participate in Paylocity's internship programming, including the P&T internship summit in Schaumburg, Illinois. Our Team Is: • Building infrastructure that can power ML and AI features for millions of users., • Building and deploying AI capabilities that help customers get more value from the Paylocity platform., • Treating responsible AI and AI ethics as first-class considerations in our engineering processes., • Working collaboratively across Machine Learning Engineering, Data Science, Data Engineering, DevOps, security, and platform teams., • Invested in learning and applying modern machine learning engineering tools, technologies, and practices. Primary Responsibilities: The responsibilities below represent the primary duties of the role. With support from mentors and teammates, you will: • Contribute to the design, implementation, testing, and improvement of shared AI platform capabilities and services within a defined project scope., • Build on top of AI platform components to support new AI-powered product experiences, including agent workflows, model integrations, and reusable platform tooling., • Contribute to building or improving conversational interfaces and experiences, including request handling, conversation flows, context management, and integration with backend services or agents., • Help develop and improve AI observability and evaluation capabilities, including tracing, metrics, quality evaluation, debugging, and monitoring of AI or agent behavior., • Write clean, maintainable, and well-documented Python code following established engineering standards and best practices., • Collaborate with Data Science and Data Engineering partners to help integrate models and data workflows into reliable software solutions., • Contribute to automated testing, CI/CD workflows, monitoring, and troubleshooting for assigned ML engineering work., • Investigate bugs and technical issues with guidance, document findings, and participate in root-cause analysis and problem resolution., • Participate in code reviews, incorporate feedback, and learn how engineering teams balance quality, reliability, scalability, and delivery., • Participate actively in agile ceremonies, technical discussions, and cross-functional meetings., • Document technical decisions, implementation details, and lessons learned from internship projects. Required Qualifications: • Currently pursuing a Master’s degree in Computer Science, Machine Learning, Data Science, Data Engineering, Software Engineering, Statistics, Mathematics, or a related quantitative or technical field., • Foundational programming experience in Python through coursework, academic projects, research, hackathons, or other practical work., • Foundational understanding of software engineering concepts such as data structures, algorithms, testing, version control, and debugging., • Coursework, academic, research, or project experience with AI/ML systems, including exposure to AI observability or evaluation concepts such as tracing, quality metrics, model or agent evaluation, prompt/response analysis, or related evaluation frameworks., • Familiarity with Git or another version control system., • Ability to work effectively in a collaborative, team-oriented environment and to seek guidance when needed., • Strong curiosity, attention to detail, and willingness to learn unfamiliar tools and technologies., • Ability to communicate technical ideas clearly in written and verbal discussions. Preferred Skills: • Experience leveraging AI-assisted coding agents or developer tools such as Claude Code, Cursor, GitHub Copilot, or similar tools to support software development, debugging, testing, or technical problem solving., • Academic, research, internship, or personal project experience building machine learning applications in Python., • Exposure to data engineering or distributed computing concepts, including Spark, Databricks, or similar technologies., • Familiarity with cloud platforms such as AWS, GCP, or Azure., • Exposure to APIs, containers, CI/CD, Infrastructure as Code, or other modern software delivery practices., • Interest in generative AI, recommendation systems, ML platforms, MLOps, or responsible AI., • Contributions to open-source software or participation in technical clubs, hackathons, competitions, or research projects. What You Will Learn: • How machine learning solutions move from experimentation into reliable, maintainable software., • How ML engineers collaborate with Data Scientists, Data Engineers, DevOps, security, and product partners., • How automated pipelines, testing, CI/CD, observability, and cloud infrastructure support production ML systems., • How to review code, receive technical feedback, debug issues, and communicate engineering tradeoffs., • How to balance model quality with software quality, scalability, reliability, security, and customer impact., • How responsible AI considerations are incorporated into the design and delivery of AI/ML features. Growth and Conversion Opportunity This internship is intended to help students with 0 years of professional experience build the skills needed for an early-career Machine Learning Engineering role. High-performing interns may be considered for future full-time opportunities, based on performance, business needs, and available headcount. Equal Opportunity and Accessibility Paylocity is committed to the full inclusion of all individuals. We recruit, train, compensate, and promote regardless of race, religion, color, national origin, sex, disability, age, veteran status, and other protected status as required by applicable law. At Paylocity, we believe diversity makes us better. We embrace and encourage our employees’ differences in age, culture, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion or spiritual belief, sexual orientation, socio-economic status, veteran status, and other characteristics that make our employees unique. We actively cultivate these differences through our employee resource groups (ERGs), employee experiences, perspectives, talents, and approaches to drive innovation in the software and services we provide our customers. We comply with federal and state disability laws and make reasonable accommodations for applicants and employees with disabilities. To request reasonable accommodation in the job application or interview process, please contact accessibility@paylocity.com. This email address is exclusively designated for such requests, aligning with federal and state disability laws. Please do not send resumes to this email address, as they will be removed.

Job Description Allient-Rochester (formerly ORMEC Systems, Inc.), a subsidiary of Allient Inc., specializes in motion control systems, including motion controllers, servo drives, motors, and integrated automation solutions. Allient-Rochester services the aerospace & defense, medical, semiconductor equipment, e-mobility & logistics, factory & industrial automation, and packaging industries, Allient-Rochester’s tradition of innovation and excellence in motion control continues to grow as part of Allient’s global network of motion and control solutions. Summary: The Senior Electrical Engineer researches, designs, and develops embedded electronics and motion control systems in collaboration with software product development. This role combines deep technical leadership, product ownership, and hands-on electronics hardware development, leading the architecture and implementation of complex embedded motion control systems. The role requires a high degree of independence and leadership in complex projects, including management of the full electronics hardware development lifecycle, contribution to technology strategy, on-time delivery, mentorship of junior engineers, and serving as a technical and/or product leader for assigned product lines. Responsibilities: Architect, Design, and Develop Embedded Motion Control Hardware: • Design, implement, andoptimizeembeddedelectronicshardware for motion control, servo drives, power electronics, motor control, and industrial automation systems., • Own electrical system architecture spanning power conversion, analog, digital, sensing, communications, and mixed-signal domains., • Performcomponentselection, circuit design, tradeoff analysis, and schematic development., • Contribute to hardware platform strategy, subsystem definition, and product architecture decisions., • Support PCB implementation, layout collaboration,stack-up design, grounding, thermal, DFM/DFT, and hardware integration activities., • Translate product requirements into robust, manufacturable, and scalable electrical designsand low-level engineering specifications. Lead Hardware Bring-Up, Debugging, and Validation: • Lead board bring-up, electrical debugging, characterization, and root cause investigation from prototype through production release., • Troubleshoot electrical, mixed-signal, and power electronics issues using oscilloscopes,logicanalyzers, power instrumentation, and engineering diagnostic methods., • Analyze switching behavior, efficiency, thermal performance, EMI/EMC, grounding, and signal integrity., • Develop and execute validation, verification, and hardware characterization activities., • Drive technical issues frominitialsymptomthrough corrective action and validated resolution. Support Product Development, Integration, and Manufacturing Readiness: • Support hardware/firmware integration, system-level debugging, and motion control system development across the product lifecycle., • Support design verification, validation, EMC/EMI, safety, regulatory, and agency compliance activities, ensuring adherence to hardware development best practices and industry standards., • Support transition from prototype through manufacturing release, production readiness, and sustaining activities, including investigation of manufacturing, field, and customer-reported technical issues., • Manage projects independently, adapting to complexity and scale while collaborating across teams to align electrical development activities with product objectives and organizational goals. Provide Technical Leadership & Strategy: • Provide mentorship and technical guidance to junior engineers., • Contribute to technology roadmaps and strategic planning for electronics development., • Lead and actively participate in all phases of the product lifecycle—architecture, implementation, review, documentation, testing, release, and long-term maintenance., • Support coordination across teams, including software/firmware, QA, and product management., • As a Technical Leader, provide technical direction, work coordination, mentoring, and oversight for contributing engineers on assigned projects, products, or initiatives (as assigned)., • As a Product Leader, take ownership of a specific product lines hardware development, documentation, testing, maintenance, quality, and support(as assigned). Qualifications: Education & Experience: • Bachelor’s or Master’s degree in Electrical Engineering or related field., • 10+ years of professional experience in embedded electronics development., • Demonstrated ownership of complex embedded systems or product architectures in production environments. Technical Skills Required: • Expert-level experience with electronics architecture, power, analog, digital, and mixed signal circuits., • Expert-level proficiency in detailed circuit design, modeling, analysis, and schematic capture (Altium)., • Expert-level proficiency with electronic test and measurement equipment., • Strong experience with PCB layout and board-level design practices(PCB stack-up, thermal management, grounding, noise mitigation, signal integrity, and design for EMC/EMI compliance)., • Strong experience in hands-on bring-up, test, and debuggingof embedded electronics and power stages., • Knowledge of, ordemonstrated ability to rapidly learnand applykey technologiesincludingpowerconversion(SiC,GaN, MOSFET, IGBT),BLDC/ PMSM motor systems, DC / DC conversion, inverter stages, signal conditioning, feedback devices (EnDat, BiSS, SSI,hallsensors),EtherCAT, CAN., • Experience supporting EMC/EMI, safety, validation, or agency compliance activities(UL / CE)., • Must be a U.S. person due to ITAR regulations. Optional, Desirable Technical Skills: • Functional safety awareness (IEC 61508 / IEC 61800-5-2 / SIL concepts)., • Experience with embedded software, C/C++,control system integration, or other coding experience., • Exposure to Linux and Unix., • Experience using MATLAB Simulink for modeling and analysis, • Experience with FPGA or other programmable logic, • Experience with hardware-in-the-loop test fixture development. Additional Required Competencies: • Strong problem-solving and analytical skills., • Ability to work independently and lead projects effectively., • Excellent verbal and written communication skills., • Commitment to quality, efficiency, and innovation., • Experience in cross-functional team collaboration. Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit www.Allient.com Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description The Opportunity: We are seeking a skilled and experienced senior electrical engineer, with a focus on RF design, to join our dynamic team. The successful candidate will be responsible for designing, developing, and testing printed circuit boards (PCBs) and electrical system for Safran products. As there is a focus on RF design, the ideal candidate brings a solid foundation in RF engineering and is comfortable stepping into an RF role while also supporting general hardware development activities. This role requires an understanding of electric components, circuit design, and PCB layout, as well as proficiency in industry-standard software and tools. The engineer will work through the full hardware development lifecycle: from concept, schematic capture, and layout review to hardware integration and system validation. Our Technology: We’re the world leader in Resilient Positioning, Navigation and Timing (R-PNT) solutions that improve the reliability, performance, and safety of critical high-risk operations, even in GPS/GNSS denied environments. We provide virtually fail-safe GNSS and PNT solutions and applications for military and government contract customers. How I will Contribute: • Design, development, build and test PCB prototypes, conduct debugging and troubleshooting to identify and resolve issues. Lead smaller projects related to large scale design efforts., • Design, develop and test electrical hardware systems and components for electrical systems, • Perform detailed circuit design, simulation, analysis (analog, digital, and/or mixed signal), • Guide integration, optimization, and troubleshooting the system performance of RF/photonic subsystems, • Support system-level analysis for RF performance, including impedance matching, isolation, noise figure, and signal chain integrity, • Design, simulate, and validate RF circuits including match networks, filters, amplifiers, and interfaces to agile or software-defined transceivers, • Work with counterparts to translate component-level specifications into system requirements, and flag where performance claims won’t translate into full RF performance, • Support qualification and validation of key RF test infrastructure, • Develop and maintain electrical component and hardware specifications and design documentation, • Collaborate with cross-functional teams, including software engineers, mechanical engineers and manufacturing, to ensure timely delivery of high-quality products, • Work with a cross-functional team of engineers, providing technical leadership across projects, • Collaborate on schematic capture, PCB layout, and component selection ensuring best practices for both RF and mixed-signal performance., • Develop and execute test plans and procedures to ensure the quality and reliability of electrical hardware systems and components, • Create and maintain detailed design documentation, including schematics, layout files, BOMs (Bill of materials) and test plans., • Ensure designs comply with industry standards and regulatory requirements, including MIL-STD, EMI/EMC and safety standards, • Develop and maintain relationships with vendors and suppliers to ensure the availability of materials and components, • Collaborate with manufacturing teams to ensure the successful transition of electrical hardware designs to production., • Stay updated with the latest advancements in PCB design, materials and manufacturing processes to continuously improve product quality and efficiency What You Bring to the role: • 4+ years with A Bachelor’s, or 2+ years with a master’s degree, in Electrical Engineering, Electronics Engineering, or a related field, • Experience in RF and electrical hardware design and validation, • Hands-on experience in designing and testing RF systems and subsystems, • Proficiency in electrical hardware design tools, such as Altium Designer, Cadence Allegro, or OrCAD, • Understanding of PCB layout best practices, including high-speed design, EMI/EM considerations, thermal management, RF isolation, and manufacturability, • Familiarity with industry standards and regulations, such as FCC, EL, CE, and MIL-STD testing, • Strong understanding of analog, digital, RF, and/or power supply circuit design, • Proven ability to work across engineering domains, • Experience with high-speed PCB design and signal integrity analysis is a plus, • Knowledge of manufacturing processes, DFM (Design for Manufacturing), and DFA (Design for Assembly) principles, • Documented active US Government Security Clearance at the Secret level or higher highly preferred., • Strong written and verbal communication skills, • Positive attitude and ability to engage and influence, • Excellent communication and teamwork abilities, • Ability to manage multiple projects and meet deadlines Some of the Good Stuff: • Annual Bonus Opportunity, • Medical, Dental, Vision, Health Savings Account, Flexible Spending Account, • Paid Time Off, • 401k Retirement Program with Employer Match, • Gym Membership Reimbursement, • Tuition Reimbursement Program, • Employee Career Development, • Flexible working arrangements, • Excellent culture About Safran Federal Systems: Safran Federal Systems has been awarded as a Winner of the USA Today and Rochester Metro Area Top Workplaces 2026 Award. In 2022, Safran acquired Orolia, now Safran Trusted 4D, the world leader in Resilient PNT. At the intersection of critical infrastructure and national defense, Safran Trusted 4D solutions govern and protect the integrity of systems that shape the world. In early 2019, Orolia Defense & Security spun off as a separate entity from its parent company Orolia, with the mission of providing resilient Positioning, Navigation and Timing (PNT) solutions and custom engineering services to U.S. Government agencies, U.S. Defense organizations, and their contractors. In August of 2019, Orolia Defense & Security acquired Talen-X, a U.S. company specializing in advanced GNSS (Global Navigation Satellite System) Simulation solutions and Interference, Detection, and Mitigation (IDM) technologies. Talen-X's portfolio was an ideal fit and has helped to enhance Safran FS's overall offerings. The acquisition enabled Talen-X's existing resources, operations, and capabilities to be scaled and accelerated to better support the warfighter. Read the press release here. Safran Federal Systems operates as a proxy-regulated company, Free of Foreign Ownership, Control, or Influence (FOCI). As such, Safran FS Defense & Security is approved to work on the full spectrum of U.S. Government classified and unclassified projects and is positioned to support strategic partnerships in the development of key PNT technologies for the defense market. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Please note this description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Job Title: Embedded Software Engineer (Jr.-Mid Levels) Department: Engineering Reports To: Director of Engineering Job Summary Vanteon is openly seeking applicants for Embedded Software Engineer positions. Based on the applicant's level of experience, they may be classified as a Junior-level. In general, this role is responsible for performing embedded software design and implementation with the guidance of more senior staff. Duties/Responsibilities The following is a list of expected duties to be involved with the position. It is not fully inclusive, and additional ones may be assigned as determined by management: • Support development of Requirement Specifications, • Create other technical documentation, including design documents and development notes., • Design and implement embedded software solutions, device drivers, and board support packages, • Provide project estimates and technical support for the Sales Process, • Rapidly understand and become proficient with existing code bases, • Collaborate with hardware and other engineers in design and integration efforts. Required Specialized Skills/Knowledge • Embedded systems software for real-time bare-metal, RTOSs, and embedded Linux based systems., • Multi-threaded programming, distributed design, device driver development, hardware level diagnostics, BIOS / Bootloader development and configuration, and interrupt handling., • Proficient with C/C++ and able to work at the assembly level for embedded processors., • Experience using embedded tools such as compilers, debuggers, ICE, Emulators, • Hardware/software interface design experience (SPI, I2C, LVDS, DMA, etc.), • Proven track record of successful product completion and deployment, • Excellent writing, analytical, and verbal communication skills, • Highly motivated, well-organized self-starter Desired Skills • Linux kernel driver and application software development, • Linux BSP bring-up on custom hardware platforms, • FPGA HDL and block design familiarity, • Experience with Python for automated test fixturing, • Knowledge of C/C++ and object-oriented design approaches to reusable software systems design, • Knowledge of common CI/CD tools and methodologies., • Experience with UML design modeling and tools, • Experience with common build management systems (make, etc.) and git version control systems. Education and Experience: • · Bachelor of Science in Electrical Engineering, Computer Engineering, Computer Science or Software Engineering, • · Preference to those with an MS and/or coop experience, • · 1-5 years of experience in embedded software development Physical Requirements: • Prolonged periods sitting at a desk and working on a computer, • Be able to perform low to moderately strenuous physical activities requiring standing, walking, and reaching., • Must be able to lift up to 15 pounds at times. The physical demands described above represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Equal Opportunity Employer Vanteon Corporation provides equal employment opportunities to all employees and applicants for employment. It prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Compensation Range A candidate's compensation will depend heavily on their skills and experience and will include a very competitive benefits package. Position is eligible for a variety of bonuses, including client referrals, employee referrals, publications, and extra effort. The estimated range for specific positions associated with this job posting is: • Junior Engineer – $80,000 to $95,000, • Engineer – $90,000 to $105,000, • Senior Engineer - $100,000 to $120,000 (for those applicants with significant experience) Applying Applicants should submit a resume and cover letter to Ronnie Ells – careers@vanteon.com. Please note that all offers for hire are contingent on passing e-verification, background checks, and drug screenings. In addition, you must be able to work with ITAR and CUI data. About Vanteon Vanteon LLC, a wholly owned subsidiary of Performance Drone Works, is an engineering services company specializing in wireless and RF design. We offer Analog, Digital, RF, Hardware, Software, and FPGA design services. At Vanteon, we develop products for companies that range from small start-ups to large Fortune 50 companies. The designs we create include Software-Defined Radio (SDR), Wi-Fi, Bluetooth, etc., for markets such as telecom (3G, 4G, 5G cellular), Aviation, Medical, Government, Industrial, and more. Types of projects include handheld devices, wearables, RADAR, signal/spectrum analyzers, and wireless widgets of all kinds. Vanteon has been voted one of the "Best Companies to Work for in NY" for 15 years running; most times, we've ranked in the top 5.

Job DescriptionPEKO is a full-service, debt-free, privately-owned contract manufacturer with over 60 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Electrical Engineer Primary Function: The Electrical Engineer is responsible for machine control hardware and software design, procurement of components, startup, debugging, calibration and verification. This individual will assist with the designing of electrical power and control systems for industrial and commercial equipment used in medical, pharmaceutical, alternative energy, semi-conductor and other industries. They will be supporting the NPI (New Product Introduction) group in the development of new product design and introduction, functional specifications, technical design, automated assembly, development and testing within PEKO and for our customers. Essential Functions: • Create and review electrical schematics, wiring diagrams, and other technical documentation., • Develop and maintain PLC software for various applications, including automation, process control, and robotics., • Assist in creating specifications, critical parameters and statement of work., • Apply knowledge in electrical power transmission, controls systems, programing, wiring/panel design, automation for design and development., • Conduct thorough electrical testing and troubleshooting to ensure system functionality and reliability., • Utilize problem solving and creative thinking skills to develop solutions and implement design options with customers, suppliers and manufacturing, while working collaboratively within a team environment., • Collaborate with mechanical engineers, software engineers, and technicians to integrate electrical systems into complete electromechanical assemblies., • Participate in all phases of the product lifecycle, from concept and design to manufacturing, testing, and installation. Basic Qualifications: • Bachelor's degree in Electrical Engineering or a related field., • Understanding of PLC programming (e.g., Allen-Bradley, Siemens, Rockwell)., • Familiarity with electrical schematic design and drafting software (e.g., AutoCAD Electrical, EPLAN)., • Experience with electrical testing equipment and procedures., • Excellent analytical, problem-solving, and troubleshooting skills., • Strong communication, interpersonal, and teamwork skills., • Ability to work independently and as part of a team., • Proficiency with component selection and sizing for electrical systems (e.g.relays, circuit breakers, wire sizing, power supply sizing)., • Knowledge of text-based languages; C, Java., • Knowledge of best practices for industrial controls, working knowledge of NFPA/NEC code for electrical system design. Preferred Qualifications:, • 3+ years of experience in electromechanical hardware and software design and development., • Knowledge of Python is a plusReports To: NPI Engineering Manager Work Authorization: US Persons PEKO Perks: • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • Recognition Awards & Discretionary Benefits Our Core Values: • Compassion: We care about our talented and loyal PEKO family., • Safety: We are committed to providing a safe, clean, and positive workplace., • Integrity: We believe in transparency, honesty, and respect for all stakeholders., • Agility: We are dedicated to maintaining an agile and financially prudent organization., • Endurance:We foster the belief that PEKO people are resilient problem-solvers impacting the future., • Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube Other: • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $80,000 - $90,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR IWUHlOUmGF

Job Description Senior Computer Vision and Deep Learning Engineer Department: Product Design Services FLSA Status: Exempt Reports to: PDS Operations Manager Pay Range: $120,600 - $174,800 annually Location: Rochester. NY The Role: D3 Embedded is seeking a skilled Computer Vision and Deep Learning Engineer to develop and implement cutting-edge AI solutions. This role involves designing, training, and optimizing deep learning models for image and video analysis, object detection, and pattern recognition. The ideal candidate has experience with machine learning frameworks (PyTorch, TensorFlow), computer vision algorithms, and real-world deployment of AI models. This position requires strong problem-solving skills and collaboration with cross-functional teams to drive innovation and enhance product capabilities. The Responsibilities: • Research, develop, and integrate CV/AI solutions for perception problems such as object detection, instance segmentation, sensor fusion, pose estimation etc., • Translate product feature requirements to design specifications and devise high-level software architectures to meet requirements and guide design trade-off decisions., • Deploy real-time, optimized CV/AI solutions to embedded and edge platforms., • Own the full life cycle of new products/solutions from proof of concept to integration with other components and teams., • Collaborate with management and technical teams on product strategies, • Lead and/or participate in all phases of the product development cycle including:, • requirements definition and architecture, • software design and development, • implementing software, • software/hardware integration, • verification and validation, and customer support, • Develop & identify tools / methods for better design reuse & process improvement, • Lead design reviews and provide technical oversight, • Mentor junior engineers Additional Responsibilities: Other duties as assigned The Right Person Will Have (Required): • Master of Science or PhD in Computer Vision, Machine/Deep Learning, Computer Science, Computer/Electrical/Software Engineering, or a related field., • 5 years of industry experience, • Excellent problem solving & troubleshooting skills., • Proficiency in Python and C++, • Proficiency with OpenCV, • Proficiency with PyTorch, TensorFlow, or related machine learning framework(s), • Experience with fine-tuning and transfer learning AI models, • Ability to design end-to-end processing pipelines for custom use cases, • Self-Driven personality, • Capable of a big picture, system-oriented approach, • Solid technical leadership skills, • Strong communication and interpersonal skills The Right Person Will Have (Preferred): • Experience with autonomous/industrial robotic platforms and applications, • Experience with embedded and edge processing platforms (Nvidia Jetson devices and TensorRT in particular), • Experience with edge AI accelerators (integration, model conversions, deployment, profiling, etc.), • Knowledge of intrinsic and extrinsic calibration procedures for multi-modal sensor systems, • Experience with sensor fusion techniques (calibration, early, mid, late fusion, etc.), • Knowledge of camera optics and computational geometry, • Gstreamer experience, • Robot Operating System (ROS) experience, • Experience with version control systems such as GIT and DVC, • Experience with GPU programming frameworks such as OpenCL and CUDA The Benefits: • Competitive total compensation, • Medical and dental coverage, • Employer paid basic life, short-term disability, and identity theft coverage, • Voluntary vision, life, long-term disability, accident, critical illness coverage, • 401k retirement contribution, • Paid holidays, time-off, and sick time, • Tuition assistance and employer paid professional development, • Flexible work schedules, • Remote opportunities available, • Complimentary snacks and beverages, • Employer sponsored social events The Company: Since our founding in 1999, D3 Embedded has driven innovation in high-performance embedded systems development. We leverage our expertise in autonomous machines, sensors, imaging, optics, edge computing, algorithms, robotics, and electrification to provide cutting-edge engineering design and low-volume manufacturing services. Headquartered in Rochester NY, we serve a global network of customers and are proudly connected with many technology leaders and Fortune 500 companies. We are interested in bright, creative, and team-oriented individuals exhilarated by the opportunity to transform the world through frontier technologies. Candidates must be eligible to work in the United States. D3 Embedded does not sponsor visas. For more information about D3 Embedded, please visit www.d3embedded.com. D3 Embedded is committed to fostering a diverse work environment and proud to be an Equal Opportunity Employer. We consider and hire applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, or membership in any other group protected by federal, state or local law. D3 Embedded participates in E-Verify, a federal program that confirms employment eligibility upon hire. Powered by JazzHR NPzqe7XhVM

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 60 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Mechanical Engineer Your Role: As a Mechanical Engineer, you will support the NPI (New Product Introduction) division in the design and development of cutting-edge technology, new products, processes, and automation for OEMs and startups. This role provides expertise to solve, design, process, and manufacturing challenges using various tools of the trade, including CAD, FEA, and other hands-on activities. Reports To: Engineering Manager Essential Functions: • Using CAD and other tools, ability to generate designs and manufacturing drawings adhering to customer specifications within defined cost, quality and delivery parameters., • Provide concepts and drawings in analog and digital formats., • Provide engineering analysis to support manufacturing, design and process development, • Apply knowledge in mechanical power transmission, fluid power, mechanical components, fabrication and basic automation for design and development., • Work with and support cross-disciplinary teams to solve product design, manufacturing and process problems., • Ability to respond quickly and professionally adhering to delivery requirements., • Participate in customer meetings and travel (<5days/year) as required., • Utilize problem solving and creative thinking skills to develop solutions and implement design options with customers, suppliers and manufacturing, while working collaboratively within a team environment., • Hands on: assembly / testing support to support prototyping and process development Basic Qualifications: • CAD for 3D design and detailing; Solidworks, Inventor and/or CREO skills required., • Experienced in technical communication internally and externally; email, technical write-up, presentation, meetings., • MS Office: Word, Excel and PowerPoint., • Engineering Design: CAD, FEA, FMEA techniques, Analysis (stress, displacement, thermal), DFMA, tolerance analysis and GDT., • Experienced in developing and communicating project progress., • Experience with various manufacturing processes, i.e. machining (CNC, Mill, Lathe), sheet metal, welding, and materials., • Minimum education: BSME – 4 YEAR Mechanical Engineering / Engineering Technology Degree, • 3-5 years Engineering Design or problem solving with commercial or industrial equipment/processes., • 1-2 years minimum CAD design experience in SolidWorks or CREO., • Experience with various manufacturing processes i.e, machining, sheet metal manufacture, plastics processing, costing & finishing in general. Preferred Experience: • Knowledge of industrial control systems and software a plus Work Authorization: US Persons PEKO Perks: • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • Recognition Awards & Discretionary Benefits Our Core Values: Agility We are committed to maintaining a financially prudent and adaptable organization, ready to meet evolving challenges with confidence. Compassion We care deeply for our talented and loyal PEKO family, fostering a supportive and inclusive workplace culture. Endurance We believe in the resilience of our people—problem solvers who shape the future through perseverance and innovation. Integrity We uphold transparency, honesty, and respect in all interactions with employees, customers, and stakeholders. Safety We prioritize a safe, clean, and positive work environment where every team member can thrive. Other: • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $75,000-$85,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR Gm7sriQesf

Job DescriptionDescription: The Mechanical Engineer is responsible for all aspects of system design, build, debug, and installation support. This includes mechanical design, 3D modeling, drawing package creation and approval, build support, robot and PLC programmer assistance, process development and improvement, and startup of industrial automation systems. Key Job Responsibilities Design & Development • Develop 3D models and design layouts for industrial automation systems, • Create 2D drawings for fabrication as needed to support project schedule or complexity, • Review and approve detail drawings created by the drafting/detailing team for accuracy and completeness prior to release, • Research and source components, obtaining quotes and specifications from vendors, • Develop and maintain accurate bills of materials from drawing packages, • Perform engineering calculations to size system components per client specifications and industry standards, • Apply knowledge of design principles (Design for Assembly, Design for Manufacturability, etc.), • Evaluate project and design feasibility, including engineering analyses (classical mechanics, simulations, etc.), time studies, and cost analysis Integration & Support • Assist PLC and Robot Programmers during system build, startup, and debugging, • Account for controls systems and how they interact with mechanical design, • Support installation, startup, and troubleshooting activities at customer sites Process & Management • Stay up to date with emerging automation technologies and apply where needed, • Participate in system risk assessments (safety, process risk assessment), • Attend and contribute to internal and external design reviews, • Promote engineering solutions that align with technical and budgetary constraints, • Adhere to project schedules & manage priorities within multiple projects in various phases, • Ensure adherence to company standards and best practices Collaboration & Leadership • Work closely with project managers and customers throughout project lifecycle, • Collaborate with multidisciplinary teams to develop integrated automation solutions, • Assume the role of project Technical Lead when required, • Support overall organizational growth initiatives Education & Experience • B.S. Degree in Mechanical Engineering or equivalent experience, • 5-10 years of experience in automation design Requirements: Skills & Competencies • Strong mechanical troubleshooting and problem-solving skills, • Ability to work independently and within a team environment, • Effective written and verbal communication skills, • Strong organizational and project task management abilities, • Willingness to travel occasionally (5%) to customer sites and other company locations Technical Proficiency • Design Software: Autodesk Inventor (preferred); SolidWorks experience also considered; AutoCAD 2D; Autodesk Vault (product data management); HyCAD (a plus), • General software: Microsoft Office products, • Software Applications: Encompix ERP (a plus) Expertise in Machine Systems • Sequential part assembly and processing, • Drivetrain and actuators, • Robots and end-of-arm tools, • Part fixturing, • Conveyors & material handling, • Palletizing systems, • Forging processes, • End-of-line packaging, • Machine safety In compliance with pay transparency requirements, the wage range for this role is $95,000 - $115,000 hour. The rate range provided is a general guideline. When extending an offer, Adaptec Solutions considers factors including but not limited to experience and geographic location. Adaptec Solutions also offers a variety of benefits including generous paid time off (PTO), 11 paid company holidays including your birthday, generous health plans, dental and vision insurance, HSA/FSA accounts, generous 401(k) match and immediate vesting, short-term/long term disability coverage and basic life/AD&D insurance and education assistance. Adaptec Solutions, LLC is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state or local law.

Job Description Why Work at Arnold? Arnold Magnetic Technologies is a global leader in high‑performance magnetic materials and precision assemblies. Our products power innovations in aerospace, defense, energy, medical, and automotive applications. When you join Arnold, you’re joining a team focused on technical excellence, operational integrity, and advancing next‑generation magnetic technologies. Job Summary Arnold Magnetic Technologies is seeking a strategic, hands‑on Manufacturing Engineer Supervisor to lead, develop, and elevate its manufacturing engineering and technician team. This role is responsible for optimizing production processes, improving operational efficiency, enhancing product quality, and supporting the company’s industrial, aerospace, defense, medical, and commercial product lines. The Manufacturing Engineer Supervisor serves as a critical link between engineering, production, quality, supply chain, and leadership. This role requires strong technical expertise, proven leadership experience, and the ability to drive continuous improvement within advanced manufacturing environments involving engineered materials and precision assemblies. Key Responsibilities • Supervise, coach, and develop a team of manufacturing engineers and technicians., • Evaluate and refine manufacturing processes to improve throughput, reduce waste, and strengthen product quality., • Partner with production and quality teams to identify and resolve daily technical issues., • Establish and maintain process documentation, including control plans, standard work, and work instructions., • Lead initiatives related to process optimization, workflow improvements, and equipment upgrades., • Ensure compliance with company safety standards and promote a culture of safe work practices., • Track and report key performance metrics to leadership, providing insights and recommendations., • Collaborate with suppliers to enhance equipment performance and optimize materials used in production. Minimum Requirements • Bachelor’s degree in Manufacturing, Industrial, Mechanical Engineering, or a related technical field., • 5+ years of experience in manufacturing engineering, including at least 2 years in a leadership or supervisory role., • Strong understanding of manufacturing processes, lean principles, and quality management systems., • Skilled in CAD software and manufacturing process simulation tools., • Strong communication and interpersonal skills, with the ability to lead teams and collaborate cross‑functionally. Preferred Qualifications • Master’s degree in Engineering or Business., • Lean or Six Sigma certification (Green or Black Belt)., • Experience with ERP systems such as SAP or Oracle; Syteline preferred., • Experience in regulated industries such as aerospace, automotive, or medical devices. Key Skills & Competencies • Expertise in manufacturing process engineering and continuous improvement., • Proven leadership abilities with experience managing both engineers and technicians., • Strong analytical and problem‑solving skills., • Proficiency with CAD and process modeling tools., • Working knowledge of lean methodologies and quality systems. #ROC Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran

Job Description Job Summary: The Chief Engineer – Metrology at Syntec Optics serves as the technical authority for all optical measurement systems and methodologies. This role leads the development and deployment of advanced metrology solutions to ensure precise characterization of optical components and assemblies, supporting high-performance applications in aerospace, defense, medical, and semiconductor industries. The position requires deep expertise in interferometric measurement, surface metrology, active alignment, and system-level optical performance validation. Essential Duties and Responsibilities: • Lead the metrology engineering strategy across optical fabrication, coating, and assembly, • Define best-in-class measurement methods for high-precision optical components and systems, • Oversee and optimize advanced metrology equipment, including:, • Zygo interferometric scopes and systems, • Interferometers for transmitted and reflected wavefront measurement, • Profilometers for surface form and roughness characterization, • Develop and standardize measurement techniques for:, • Surface irregularity and wavefront error, • Optical element centration and alignment tolerances, • Active alignment processes with real-time measurement feedback, • Lead system-level optical performance validation, including:, • Sensor quality assessment, • MTF (Modulation Transfer Function) measurement, • Distortion characterization and correction analysis, • Architect, design, and deploy custom optical testers and automated metrology systems, • Establish and manage reliability testing protocols for optical systems, ensuring durability under environmental and operational stress conditions, • Define calibration processes, measurement uncertainty budgets, and Measurement System Analysis (MSA), • Ensure traceability to national standards (e.g., NIST), • Collaborate with Quality, Engineering, and Manufacturing teams to ensure measurement capability supports product specifications, • Analyze metrology data to drive process improvements, yield enhancement, and defect reduction, • Support root cause analysis of optical performance issues and measurement discrepancies, • Provide technical leadership during customer audits and high-level engineering reviews, • Mentor and develop metrology engineers and technical staff, • When requested, may work on special projects and various related assignments., • Direct technicians as needed., • Provides employee coaching and development. Assists in employment or metrology-purchase decisions., • Performs other related duties and assignments as required. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from low, moderate to loud. Education, Skills and Experience: • Bachelor’s, Master’s, or PhD in Optical Engineering, Physics, or related field, • 10+ years of experience in optical metrology or precision measurement engineering within high-precision industries (optics, photonics, aerospace, semiconductor), • Advanced expertise in optical metrology, including Zygo scopes, interferometers, and optical profilometers, • Strong experience with optical measurement techniques, including irregularity, centration, alignment, and active alignment systems with feedback control, • Proficiency in system-level optical performance analysis, including sensor/image quality, MTF, and distortion, • Proven ability to design, develop, and implement custom optical testers and automated inspection systems, • Experience with reliability testing and qualification of optical assemblies, • Expertise in calibration, measurement uncertainty, and statistical/data-driven analysis, • Experience with automation and data analysis tools (e.g., LabVIEW, MATLAB, Python), • Familiarity with ISO 9001 / AS9100 quality standards and cleanroom manufacturing environments, • Strong leadership, technical mentoring, and cross-functional collaboration skills, • Demonstrated ability to drive innovation, continuous improvement, and operational excellence

Job Description At Century Mold, we don't just mold parts, our customers come to us with their toughest challenges … and we mold solutions. The plastics industry is full of challenges and the Century Mold team prides themselves on their problem-solving capabilities. We strive to provide and deliver more not only for our customers but for our team as well. About the Role: This role is responsible for managing day‑to‑day quality control activities to ensure product conformance, process capability, and compliance with customer and quality system requirements. The position oversees quality documentation, PPAPs, inspections, corrective actions, and the supervision and training of Quality Inspectors, while serving as a key liaison with suppliers and customers on quality issues. Success in this role requires strong technical quality expertise, attention to detail, and the ability to proactively drive problem resolution and continuous improvement across assigned products and processes. What You’ll Be Doing: • Responsible for adhering to and maintaining all quality system procedures and requirements related to the position., • Must adhere to all safety rules and company policies, as well as enforce the compliance and implementation of each through subordinates., • Attendance/punctuality is consistently at work and on time; ensures that the Attendance Policy is enforced consistently through subordinates., • Maintain Quality Control documentation to include:, • Inspection Plans, • Product history, • Control Plan, • Process Flow Diagrams, • Sample locations, • Blueprints, • Quality Alerts, • PPAPs, • NCMRs, • Customer claims (Local management tool and customer portal(s)), • Reviews and dispositions supplier PPAP submissions including generation of receiving inspection sampling plan as required. Approves Supplier 8Ds., • Defining and maintaining control plans and inspections plans as agreed with customer., • Administers training program including testing and gaging for hourly personnel., • Supervision and training of Quality Inspectors as required., • Develop and initiate standards and methods for inspection, testing, and evaluation., • Kick off tool repair/improvement activities as required, • Receive and coordinate the resolution of customer complaints, 8D completion on customer portal and internal problem-solving tool, based on customer timing, • Devise sampling procedures and designs and develop forms, inspection plans and instructions for recording, evaluating, and reporting quality data., • Leads management of suspect / discrepant materials, including Quality alerts, NCMR management, MRB reviews, sort/rework instructions and internal claim management., • Manage PPAPs, submission and approval on time, • Management of boundary, master and PPAP parts, • Asure capability for their assigned parts and processes, • Assure product conformance by validation of parts and approval of any process change., • Participates in audits as required, as auditee or auditor We would love to hear from you if: Education and/or Experience: Bachelor's degree (B. A.) from four-year college or university; or two to four years related experience and/or training in similar position in the Automotive sector; or equivalent combination of education and experience; GD&T knowledge, SPC knowledge, core tools Computer Skills: Proficient with Microsoft Office Suite 365; Minitab; Ability to learn new software as needed. Why You’ll Love Working for Century Mold: • We reward our employees. The salary range for this position is market competitive and is based on relevant years of experience and skills., • We care about our employee’s well-being. In addition to direct compensation, we also offer a robust array of benefits to our employees; these include medical insurance, dental, vision, life insurance, as well as other great benefits to support your well-being. We also support our employees by offering 401(k) matching. The details of your position: Your Job Title will be: Quality Engineer Belonging to the: Quality Control Department You will report directly to: Plant Quality Manager Your Employment Status: Exempt Century Mold offers a competitive salary and a comprehensive benefits package that includes annual bonus, paid vacation and holidays, 401(k) matching, HSA contributions, and medical, dental and vision plans. Century Mold is an equal opportunity employer and affords equal consideration to all qualified applicants for all positions without regard to race, color, creed, religion, ancestry, citizenship, national origin, age, gender, sexual orientation and gender identity, disability, marital status, military or veteran status, predisposing genetic characteristics, domestic violence victim status, or any other status protected under local, state, or federal laws. Century Mold offers reasonable accommodation in the employment process for individuals with disabilities. If you need assistance in the application process to accommodate a disability, you may request accommodation at any time by contacting the Human Resources Department.

Job Description Applications Engineer - Thread Rolling Solutions Team Brinkman Products - CJWinter Division Location: Rochester, NY Job Type: Full-Time Salary Range: $75,000 - $105,000 annually, based on experience About Brinkman Products Brinkman Products, Inc. is an industrial manufacturing company encompassing two specialized divisions: Davenport Machine and CJWinter. Together, we manufacture proprietary product lines including Davenport multi-spindle screw machines, thread rolling attachments, thread rolls, and precision tooling solutions serving manufacturers worldwide. We are seeking a motivated and hands-on Applications Engineer to join our CJWinter Thread Rolling Solutions Team. This position is ideal for a mid-level engineer who enjoys solving manufacturing challenges, working directly with customers, and developing practical thread rolling solutions for real-world production applications. This role combines technical expertise, hands-on problem solving, customer interaction, project management, and process development to support the successful implementation of thread rolling processes and tooling solutions across a wide range of industries. What You'll Do As part of the Thread Rolling Solutions Team, you will help customers improve productivity, quality, and profitability through optimized thread rolling solutions and innovative manufacturing processes. Key Responsibilities • Evaluate customer applications and recommend thread rolling solutions, tooling, and process improvements, • Review customer drawings, specifications, material requirements, and production objectives to develop optimal thread rolling processes, • Develop, validate, and document thread rolling processes for new and existing applications, • Support customer trials, process validation, troubleshooting, and production implementation activities, • Work hands-on with thread rolling attachments, rolls, tooling, fixtures, and manufacturing equipment, • Troubleshoot customer production issues and provide technical recommendations to improve quality, productivity, and tool life, • Collaborate closely with engineering, manufacturing, product development, and sales teams to ensure successful execution of customer projects, • Assist in the development, testing, and commercialization of new thread rolling products, technologies, and manufacturing solutions, • Prepare quotations, technical proposals, cost estimates, and application recommendations, • Conduct customer training, product demonstrations, and technical presentations, • Support new business opportunities while maintaining strong relationships with existing customers, • Travel to customer facilities as needed to support installations, process optimization, training, and application development (approximately 5-15%), • Document application data, test results, lessons learned, and best practices to support continuous improvement initiatives What We're Looking For Education & Experience • Bachelor's degree in Mechanical Engineering, Mechanical Engineering Technology, Manufacturing Engineering, Industrial Engineering, or a related technical field, • 3-7 years of experience in applications engineering, manufacturing engineering, process engineering, tooling, machining, or a related technical role, • Strong mechanical aptitude and hands-on experience in a manufacturing environment Technical Qualifications • Ability to read and interpret engineering drawings, GD&T, and technical specifications, • Experience with machining, metalworking, tooling, fastening systems, or cold-forming processes preferred, • Knowledge of thread rolling processes, tooling, or precision manufacturing is a plus, • Proficiency with SolidWorks or other 3D CAD software and parametric modeling preferred, • Strong troubleshooting, analytical, and problem-solving skills, • Proficiency with Microsoft Office; experience with HubSpot and Infor ERP systems preferred Professional Skills • Excellent communication and customer-facing skills, • Ability to work effectively with customers, suppliers, and internal teams, • Strong organizational and project management abilities, • Ability to prioritize and manage multiple projects in a fast-paced environment, • Willingness to travel as required to support customer applications and projects Why This Role Appeals to Engineers Hands-On Engineering Work directly with equipment, tooling, manufacturing processes, and customer applications. Customer Impact Help solve real-world manufacturing challenges and deliver measurable improvements in productivity, quality, and profitability. Technical Variety Gain exposure to a diverse range of materials, products, manufacturing methods, equipment, and industries. Innovation Contribute to the development of next-generation thread rolling technologies, tooling, and manufacturing solutions. Career Growth Expand your expertise in specialized manufacturing technology while taking ownership of meaningful projects with industry-leading customers. Collaborative Environment Work alongside experienced engineering, manufacturing, sales, and product development professionals in a highly supportive team environment. Benefits & Compensation • Competitive salary of $75,000 - $105,000, based on experience, • Industry-leading medical, dental, and vision insurance, • Generous employer-funded Health Savings Account (HSA), • 401(k) retirement plan with company matching contributions, • Generous paid time off program plus 10 paid holidays annually, • Professional development, technical training, and career advancement opportunities, • Collaborative, team-oriented culture that promotes continuous learning, innovation, and long-term growth Join Our Team If you enjoy solving manufacturing challenges, working directly with customers, and developing innovative thread rolling solutions that drive measurable results, we'd like to hear from you. Join Brinkman Products and help shape the future of thread rolling technology. EOE, including disability/vets. Job Posted by ApplicantPro

Job Description Position Summary: Syntec Optics is seeking a Business Development Engineer to drive growth by identifying, developing, and securing new business opportunities within the precision optics and photonics markets. This role bridges engineering and sales, working closely with customers, internal engineering, and operations to translate customer requirements into manufacturable solutions. The ideal candidate combines strong technical understanding of optical manufacturing with the ability to build long-term customer relationships. Key Responsibilities: Business Development & Sales • Identify and pursue new business opportunities in commercial, defense, aerospace, medical, and industrial optics markets., • Develop and manage a pipeline of prospective customers and programs., • Serve as a technical liaison during the sales process, understanding customer needs and proposing optimized optical solutions., • Prepare and deliver technical presentations, proposals, and quotations in collaboration with engineering and operations., • Support contract negotiations and contribute to pricing strategy aligned with company objectives., • Represent Syntec Optics at customer visits, trade shows, and industry events., • Create and maintain a Gantt chart for all opportunities including leads, quotes, PO, and new product introduction. Technical & Engineering Support • Review customer drawings, specifications, and statements of work to assess technical feasibility., • Collaborate with optical, mechanical, and manufacturing engineers to develop cost-effective, manufacturable solutions., • Support new product introductions and transitions from proposal to production., • Provide feedback to internal teams on market trends, customer requirements, and competitive landscape. Customer Relationship Management • Build and maintain strong relationships with customers throughout the program lifecycle., • Act as a primary point of contact for technical and commercial discussions., • Ensure customer expectations are clearly communicated and met. Required Qualifications: • Bachelor’s degree in Optical Engineering, Mechanical Engineering, Physics, or a related technical discipline., • 3–7 years of experience in optics manufacturing, engineering, or technical sales., • Working knowledge of precision optical fabrication, coating, and metrology., • Ability to read and interpret optical and mechanical drawings and specifications., • Strong communication and presentation skills with both technical and non-technical audiences., • Proven ability to manage multiple opportunities and priorities simultaneously. Preferred Qualifications: • Experience in business development or applications engineering within an optics or photonics company., • Familiarity with defense and aerospace customer requirements (ITAR, quality standards, etc.)., • Experience with ERP/CRM systems and quoting processes., • Understanding of optical design principles and tolerancing. Key Competencies: • Customer-focused and relationship-driven, • Strong analytical and problem-solving skills, • Commercial mindset with technical credibility, • Collaborative team player, • Self-motivated with a results-oriented approach

Job DescriptionDescription: DiMarco Constructors is seeking a Project Engineer to support field operations and project management teams on commercial construction projects. Summary: A construction project engineer manages small groups of subcontractors and assists in the planning, directing and supervision of large construction projects. Construction project engineers operate as part of the overall project management team. They creatively/effectively serve as the liaison on construction projects to make sure the project is safe and runs as smoothly as possible. Essential Functions: • Work directly with the Project Executive, Superintendent, and Project Foreman to ensure the needs of the construction project are effectively meet in a timely fashion., • Assist with planning, implementing and manage construction tasks in accordance with scheduled milestones., • Assist superintendent with the managing of the subcontractor workforce. This includes but is not limited to daily badging/collecting manpower logs from Subcontractor’s site foreman., • Project Engineers assist with reviewing/understanding drawings and designs before being built/installed on the project., • Project engineers will learn a basic understanding of contract plans, construction specifications, subcontractor scopes as well as Exhibit 3’s., • ·Assist Site Superintendent by completing professionally written correspondence. These include but are not limited to: daily journals, requests for information, potential change requests, non-compliance forms, meeting minutes and emails. CMiC our site management software, is where daily correspondence and all other correspondence will be recorded., • Responsible for photographing daily progress which can be taken using OpenSpace. Responsible for completing weekly 360 OpenSpace Captures and uploading all photos and captures into CMiC to comply with the daily requirements., • Participates in weekly meetings with Subcontractors, Owners, Architects, Engineers, and DiMarco, • Provide necessary status updates and assists in responding to questions from clients, subcontractors, and DiMarco leadership regarding schedule/milestones. Up-to-date knowledge or project schedule status and milestones will be required., • Support field team in the managing the submittal process. This including but not limited to: collecting samples, product data, shop drawings, mock-up, and technical data from subcontractors that is required by the owner/architect to review for approval., • Compliant in OSHA 30 and walk thru jobsite and review and report any non-compliant and unsafe conditions., • Responsible for working with the Logistics & Procurement Team on Long-Lead Items to identify potential issues with meeting project milestones/deadlines., • Provide support to the field team in completing quality control walks and create/review punch lists per contract requirements and DiMarco standards., • Assist project team in maintaining record set of drawings “As-Built”. Knowledge, Skills and Abilities: • Ability to navigate entire job site, including stairs or other elevated structures., • Proficient knowledge for daily usage of MS Project and MS Office., • Tactfully assists in managing difficult situations with clients, subcontractors, and coworkers; Responds promptly to the needs of clients, subcontractors and coworkers., • Maintains confidentiality; Keeps emotions under control; Remains open to others' ideas and willing to explore and try said new ideas and ways of thinking., • Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings., • Manages competing demands; Able to deal with frequent change, delays, or unexpected events., • Follows instructions, responds to management direction; Takes responsibility for own actions; Completes tasks on time or notifies appropriate person with an alternate plan., • Volunteers readily; Takes on self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed., • Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information., • Prioritizes and plans work activities; Uses time efficiently, develops realistic action plans. Physical Demands: • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • This position involves work on construction site where duties will be performed both indoors and outdoors, • While performing the duties of this Job, the employee is regularly required to stand and walk; Duties of the job may also require employee to sit in some instances., • The employee must have use of their arms and legs., • The employee must be able to climb or balance; Bend, kneel, crouch, or crawl., • The employee must be able to effectively communicate by voice as well as hear., • The employee must occasionally lift and/or move up to 100 lbs Education and/or Experience: • Construction degree or equivalent experience considered, • Microsoft office experience preferred. Additional Qualifications: • Must be able to travel to the jobsite(s) as assigned. DiMarco is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. DiMarco is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact the human resources department Requirements:

Job Description With over 50 years of excellence, Precise Tool & Manufacturing Inc. is a family-owned, Rochester-based leader in advanced CNC machining and custom manufacturing. Our 280,000 sq. ft. facility houses more than 160 CNC machines, including vertical turning lathes, horizontal boring mills, high-speed 5-axis machines, and more! We proudly support industries such as aerospace, defense, medical, energy, and power generation with a commitment to quality and innovation. At Precise Tool, we offer competitive pay, comprehensive benefits, and a collaborative work environment built on respect, teamwork, and long-term stability. Interested in joining our team? Apply today! JOB SUMMARY • Under the direct supervision of the Engineering Manager, the Process Engineer is responsible for performing a variety of manufacturing processes and engineering functions., • This position is full-time on-site in Rochester, NY. In order for a candidate to be considered they must be local to Rochester, NY. Remote or hybrid arrangements are not available for this role. ESSENTIAL FUNCTIONS Essential functions of this job include, but are not limited to, the following: • Write manufacturing processes and enter in Epicor software. Work with the engineering group on machine processes and tooling., • Interface with department supervisors and machinists on a regular basis., • Utilize customer supplied CAD files when available to process manufacturing plan., • Utilize CAD to create work holding and fixturing layouts., • Interface with CNC programmers., • Notify Tool Crib of upcoming jobs., • Develop queuing system for kits ready to set up., • Verify tooling is available for jobs and ensure back-ups are available., • Coordinate all projects as they progress through the shop., • Monitor profitability as jobs are running., • Expedite any materials and components for jobs to ensure jobs stay on schedule., • Complete routing for customer jobs., • Work with engineering group and manufacturing to develop tooling and fixturing concepts for all new work., • Update all processes during and after production., • Work with manufacturing to ensure processes are being followed, and to incorporate time saving methods when suggested., • Investigate and provide disposition on discrepant/quality issues for jobs assigned., • Review assigned jobs with department manager at hand-off and when ready to move to the floor., • Promote and support the requirements and principles of the Precise Quality Management System and AS9100. KNOWLEDGE, SKILS, AND ABILITIES • With a quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Excellent written and oral communication skills., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Familiarity with all aspects of manufacturing including material specifications, turning, milling, heat treat, welding, plating and painting., • Attention to detail., • Customer focus., • Analytical and reasoning skills., • Proficiency with 3-D modeling software packages, Autodesk Inventor., • Proficiency with Microsoft Windows. EDUCATION AND EXPERIENCE • High School Diploma or equivalent required, • College degree preferred, but not required, • 10 years of machining or manufacturing experience required, • Three years of job processing experience required JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $29.00 - $43.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203.

Job Description Job Title: Embedded Software Engineer (Sr Levels) Department: Engineering Reports To: Director of Engineering FLSA Status: Exempt Job Summary Vanteon is seeking a Principal Embedded Software Engineer to join our team. The position will design and develop Petalinux Board Support Package and MAC layer communications firmware for custom hardware. Specific platforms would include the AMD/Xilinx Zynq ARM and ADI ADRV900X Transceiver platforms. Duties/Responsibilities The following is a list of expected duties to be involved in this position; this is not fully inclusive, and management may assign other duties: • Analyze system for identification of use cases and development of System Requirement Specifications., • Design and implement embedded software, device drivers, and board support packages., • Investigate and propose project-related technologies to meet requirements., • Create technical documentation including Software Requirements Specifications, Design Documents, Test Summary Reports, and development notes., • Collaborate with hardware and other engineers for design and integration efforts., • Define and execute engineering verification and acceptance criteria tests., • Mentor more junior engineers. Supervisory Responsibilities None Required Skills & Knowledge • Embedded systems software for real-time bare-metal, RTOSs, and embedded Linux-based systems., • Multi-threaded programming, distributed design, device driver development, and hardware-level. diagnostics, MAC sublayer, BIOS / Bootloader development and configuration, and interrupt handling., • BSP creation and new custom hardware bring-up for bare-metal, RTOS, and embedded Linux platforms., • Proficient with C/C++ and able to work at the assembly level for embedded processors., • Advanced object-oriented design approaches to reusable software systems design., • Experience using embedded tools such as compilers, debuggers, ICE, and emulators., • Experience with common build management systems (make, etc.) and git version control systems., • Hardware/software interface design experience (SPI, I2C, LVDS, DMA, etc.)., • Proven track record of successful product completion and deployment., • Excellent written and verbal communication and analytical skills., • Highly motivated, well-organized self-starter. Desired Skills • AMD/Xilinx FPGA HDL, hardware configuration, and block design familiarity., • AMD/Xilinx Petalinux/Yocto bring-up, customization, and Zynq hardware integration., • ADI ADRV9002 configuration and control., • Experience with Python for testing standardization, automation, and test fixturing., • Linux Yocto build recipes., • Linux kernel and application software development., • Linux Ethernet driver stack configuration and routing (OpenWRT, etc.)., • Experience with common CI/CD tools and containerize development methodologies., • Experience with UML design modeling and tools., • Secure Bootloaders, Binary Signing and Encryption, and TPM integrations., • OpenAmp Education and Experience • BS EE/CE/CS/SE, • 5+ years' experience in embedded systems software Other Requirements • Training and regular duties require a physical office presence. Although Vanteon will comply with all NYS/Federal requirements related to COVID-19, candidates will be expected to work on-site., • Although minimal, some circumstances may require a weekly commitment above 40 hours or hours outside of regular business hours. Physical Requirements • Prolonged periods sitting at a desk and working on a computer, • Be able to perform low to moderately strenuous physical activities requiring standing, walking, and reaching., • Must be able to lift up to 15 pounds at times. The physical demands described above represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Equal Opportunity Employer Vanteon Corporation provides equal employment opportunities to all employees and applicants for employment. It prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Compensation Range A candidate's compensation will depend heavily on their skills and experience and will include a very competitive benefits package. Position is eligible for a variety of bonuses, including client referrals, employee referrals, publications, and extra effort. The estimated range for specific positions associated with this job posting is: · Principal Engineer – $115,000 to $135,000 · Senior Principal Engineer – $130,000 to $150,000 Applying Applicants should submit a resume and cover letter to Ronnie Ells – careers@vanteon.com. Please note that all offers for hire are contingent on passing e-verify, background, and drug screenings. In addition, you must be able to work with ITAR and CUI data. About Vanteon Vanteon LLC, a wholly owned subsidiary of Performance Drone Works, is an engineering services company specializing in wireless and RF design. We offer Analog, Digital, RF, Hardware, Software, and FPGA design services. At Vanteon, we develop products for companies that range from small start-ups to large Fortune 50 companies. The designs we create include Software-Defined Radio (SDR), Wi-Fi, Bluetooth, etc., for markets such as telecom (3G, 4G, 5G cellular), Aviation, Medical, Government, Industrial, and more. Types of projects include handheld devices, wearables, RADAR, signal/spectrum analyzers, and wireless widgets of all kinds. Vanteon has been voted one of the "Best Companies to Work for in NY" for 15 years running; most times, we've ranked in the top 5.

Job Description The Opportunity: We are looking for a Senior Manufacturing Engineer with a continuous improvement mindset to support the production team by providing technical leadership, developing new processes, and improving existing ones. In addition, this role will be an integral part of the New Product Introduction (NPI) process to ensure new products are brought into production fully vetted and manufacturable, setting the team up for success. Our Technology: Safran Federal Systems provides Resilient Positioning, Navigation and Timing (R-PNT) solutions and custom engineering services to U.S. Government agencies, defense organizations and their contractors. Safran Federal Systems is authorized to work on the full spectrum of U.S. Government classified and unclassified projects, in addition to supporting strategic partnerships for key defense PNT technologies. How I will contribute: • Support New Product Introduction (NPI) activities from the manufacturing perspective, including participating in Design FMEAs, pilot builds, and process validation., • Develop, validate, and implement improvements to existing products and manufacturing processes while supporting adherence to established manufacturing standards., • Create and maintain Process Flow Diagrams and other manufacturing documentation to support production and continuous improvement initiatives., • Participate in the Engineering Change Order (ECO) process by providing manufacturing input and supporting implementation of approved design changes., • Research, develop, and implement manufacturing methods, tools, and process improvements to increase operational capability and efficiency., • Apply manufacturing principles to improve quality, productivity, and manufacturing performance., • Collect and analyze manufacturing data to identify trends, support process improvements, and improve key process indicators (KPIs)., • Support NPI activities by ensuring manufacturing documentation, assembly processes, test methods, tooling, equipment, and training requirements are prepared for production readiness., • Participate in design reviews, providing Design for Manufacturability feedback and identifying opportunities to improve manufacturability and quality., • Provide technical input for manufacturing equipment, tooling, fixtures, and software required to support production., • Develop and maintain manufacturing process documentation including work instructions, process details, test procedures, and inspection checklists., • Assist in developing and maintaining Process FMEAs to establish robust manufacturing processes and define in-process inspection and testing requirements., • Analyze manufacturing workflows, equipment utilization, and facility layouts to improve efficiency for new and existing product lines., • Support preventive maintenance programs for assembly tools, fixtures, and test equipment to ensure reliable manufacturing operations., • Mentor junior engineers and manufacturing personnel by sharing technical knowledge and best practices while supporting cross-functional project teams. What you bring to the role: • Bachelor’s degree in engineering or a related technical field is required, • 4+ years of engineering experience in a manufacturing environment or relevant field is required., • Ability to work independently while collaborating effectively with cross-functional teams., • Strong verbal and written communication skills with the ability to communicate technical information across all levels of the organization., • Solid knowledge of Lean manufacturing principles, continuous improvement methodologies, and process optimization., • Strong organizational skills with the ability to manage multiple priorities in a fast-paced manufacturing environment., • Self-motivated with a proactive approach to identifying and solving manufacturing challenges., • Systematic problem-solving skills with experience using Root Cause and Corrective Action (RCCA) methodologies and implementing sustainable solutions., • Mechanical aptitude with working knowledge to support troubleshooting of product designs, tooling, fixtures, and manufacturing equipment., • Demonstrated experience supporting New Product Introduction (NPI), process development, and manufacturing improvement initiatives., • Experience developing manufacturing documentation such as Process FMEAs, work instructions, process flows, and standard work., • Demonstrated ability to quickly learn new products, manufacturing processes, and business systems., • Proficiency with Microsoft Office (Outlook, Word, Excel, and PowerPoint)., • Ability to be flexible and have fun!, • Plus: Lean Six Sigma Green or Black Belt, • Plus: Prior experience working with Aerospace, Defense, and Government customers., • Position is based in the U.S., with minimal travel (up to 10%) About Safran Federal Systems: Safran Federal Systems has been awarded as a Winner of the USA Today and Rochester Metro Area Top Workplaces 2026 Award. In 2022, Safran acquired Orolia, now Safran Trusted 4D, the world leader in Resilient PNT. At the intersection of critical infrastructure and national defense, Safran Trusted 4D solutions govern and protect the integrity of systems that shape the world. In early 2019, Orolia Defense & Security spun off as a separate entity from its parent company Orolia, with the mission of providing resilient Positioning, Navigation and Timing (PNT) solutions and custom engineering services to U.S. Government agencies, U.S. Defense organizations, and their contractors. In August of 2019, Safran Federal Systems acquired Talen-X, a U.S. company specializing in advanced GNSS (Global Navigation Satellite System) Simulation solutions and Interference, Detection, and Mitigation (IDM) technologies. Talen-X's portfolio was an ideal fit and has helped to enhance Safran FS's overall offerings. The acquisition enabled Talen-X's existing resources, operations, and capabilities to be scaled and accelerated to better support the warfighter. Read the press release here. Safran Federal Systems operates as a proxy-regulated company, Free of Foreign Ownership, Control, or Influence (FOCI). As such, Safran FS Defense & Security is approved to work on the full spectrum of U.S. Government classified and unclassified projects and is positioned to support strategic partnerships in the development of key PNT technologies for the defense market. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Please note this description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Mindex is looking for a Software Engineer to join our Product division. You'll design and build cloud-native applications on .NET and AWS, using AI-assisted engineering practices throughout the development lifecycle. You'll work closely with Product, Test Engineering, Support, and CloudOps to deliver reusable services and reliable infrastructure. The ideal candidate is a curious, detail-oriented engineer eager to own solutions end-to-end and adopt modern AI-assisted workflows. Compensation $70,000 - $120,000 What You'll Accomplish • Apply AI-assisted engineering practices (AI DLC) across the development lifecycle, sharing effective workflows and patterns with the team., • Design and maintain APIs, background services, and reusable business logic using .NET and C#., • Build customer-facing features, including UI, Blazor apps, and .NET MAUI mobile functionality., • Develop cloud-native solutions and infrastructure as code on AWS, and support CI/CD pipelines and deployment automation., • Implement observability (logging, metrics, tracing, alerting) and investigate production issues to identify root causes., • Apply security, privacy, and least-privilege principles across application and infrastructure work., • Participate in technical design, estimation, code reviews, and incremental delivery., • Collaborate with Product, Test Engineering, Support, and CloudOps to resolve dependencies and deliver complete solutions., • Document architecture and technical decisions to support long-term maintainability. Requirements • Bachelor's degree in Computer Science or a related field, or equivalent professional experience., • Three or more years of software engineering experience developing and supporting production systems., • Experience with AI-assisted development tools and structured practices such as the AI DLC, including evaluating AI-generated output against normal engineering standards., • Experience developing applications and services using .NET, C#, Web API, ASP.NET MVC, and RESTful APIs, including reusable services and shared business logic., • Experience building web and cross-platform applications using HTML, CSS, JavaScript, AngularJS, Blazor, and .NET MAUI., • Working knowledge of relational database design, SQL, and performance troubleshooting., • Hands-on experience with AWS services such as ECS, Lambda, S3, SQS, SNS, CloudFront, DynamoDB, Secrets Manager, IAM, and CloudWatch, and understanding of cloud architecture, security, and high availability., • Experience with infrastructure as code (AWS CDK, CloudFormation, or similar) and CI/CD pipelines, preferably Azure DevOps., • Experience implementing observability (logging, metrics, tracing, alerting) and troubleshooting distributed applications and production issues., • Experience with automated testing, source control, code review, and Agile delivery in cross-functional teams., • Strong communication, collaboration, and technical documentation skills. Licenses & Certifications: • AWS certifications (e.g., AWS Certified Developer or AWS Certified Solutions Architect) are a plus. Why Join Mindex? For more than 30 years, Mindex has helped organizations solve complex business challenges through custom software, cloud, data, and AI solutions. We combine deep technical expertise with a collaborative culture that empowers our employees to innovate, grow, and make a meaningful impact for our clients. In our Product division, our teams have built platforms such as SchoolTool, Advanced Analytics, and our Integrations Platform from the ground up, while also supporting solutions like MTSS Edge and ClearTrack that help schools and organizations make smarter, data-driven decisions. Benefits • Fully Remote Work Environment, • Flexible Time Off, • Medical, Dental, and Vision Insurance, • 401(k) with Company Match, • Company-Paid Life and Disability Insurance, • Professional Development Opportunities Additional Information Applicants must be authorized to work for any employer in the United States. Mindex is unable to sponsor employment visas at this time. Physical Requirements/Conditions • Prolonged periods sitting at a desk and working on a computer., • No heavy lifting is expected. Exertion of up to 10 lbs.

Job DescriptionAbout us: Aeva’s mission is to bring the next wave of perception to a broad range of applications from automated driving to industrial robotics, consumer electronics, consumer health, security, and beyond. Aeva is transforming autonomy with its groundbreaking sensing and perception technology that integrates all key LiDAR components onto a silicon photonics chip in a compact module. Aeva 4D LiDAR sensors uniquely detect instant velocity in addition to 3D position, allowing autonomous devices like vehicles and robots to make more intelligent and safe decisions. Role Overview: Aeva is seeking to hire a talented and motivated Sr/Staff Hardware Engineer to join our EE HW team. The EE HW team owns the design, build and bring up of Aeva’s mixed-signal PCBs. As a Hardware Engineer, you may be responsible to develop a System Architecture of our LiDAR system based on product requirements. You will be working closely with all EE engineers to define the individual PCBs, their function, and interconnections. What you’ll be doing: • Break down product requirements into an architecture and EE PCB designs and their interconnections, • Work closely with Electrical Engineers as well as cross-functional engineering and product teams to review their designs in terms of function and layout placement, • Optimize architecture to reduce HW and SW complexity as well as optimize for cost and power consumption, • Direct ownership of PCBs and sub-systems of a LiDAR from schematic design through layout, fabrication and bringupWhat you have:, • BS, Masters or PH.D. degree in Electrical Engineering or related field, • 6+ years experience in HW design from architecture to implementation, prototyping and bringup all the way to high volume production, • Deep understanding of HW components, their interfaces and SW controls, • Good understanding of high speed designs with a variety of communication protocols (I2C, SPI, UART, Ethernet, PCIE etc), • Demonstrated experience and technical leadership in data acquisition subsystems including high-speed ADCs, high-precision analog sense paths and high-speed serial interfaces, • Demonstrated experience utilizing commercial SI/PI software tools, • Released several complex, multi-layer PCB designs into high volume production, • Be an active team member working closely with other EE engineers and other groups, • Ability to technically lead a small team of HW engineers is a plus, • Experience in motion control systems, design and theory is a plus, • A big plus if you have experience in LiDAR design or automotive product development The salary range for Mountainview, CA will be $154,900 - $209,600 per year. Salary pay ranges are determined by role, level, and location. Within the range, the successful candidate’s starting base pay will be determined based on factors including job-related skills, experience, certifications, qualifications, relevant education or training, and market conditions. These ranges are subject to change in the future. Depending on the position offered, equity, bonus, and other forms of compensation may be provided as part of a total compensation package, in addition to comprehensive medical, dental, and vision coverage, pre-tax commuter and health care/dependent care accounts, 401k plan, life and disability benefits, flexible time off, paid parental leave, and 11 paid holidays annually. Aeva is an Equal Opportunity Employer including protected Veterans and individuals with disabilities.

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 60 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Controls Engineer Technician Primary Function: The Controls Engineer Tech is responsible for machine control startup, debugging, calibration, and verification on newly assembled or manufactured machines. Essential Functions: Tests newly manufactured and assembled equipment according to each customer's established test procedure. Uses specialized measuring, diagnostic devices, and software to evaluate functionality and proper sequence of machine control systems. Handles machine control startup, debugging, calibration, and verification Notify appropriate management of recurring issues with equipment and/or operation of equipment when necessary. Assist with other duties as assigned by the Manager. Reports To: Technical Manager Qualifications: Required • Associates degree in Electrical Engineering Technology or similar, or at least 2 years experience working as an electrical technician., • Knowledge of electrical theory and practices, including testing sensors, switches, actuators, and indicators for proper function., • Computer hardware maintenance methods, techniques, and network connection., • Basic understanding of NEC standards and state codes., • Ability to read and understand electrical schematics and annotated PLC programs., • Manual Dexterity: working with wires, using hand tools and handling small components. Preferred Previous controls engineering tech experience in a contract manufacturing environment Work Authorization: US Persons PEKO Perks: Competitive Total Rewards Tuition Reimbursement (IRS Allowable pre-tax Max) 401K, Medical, Dental, Vision Flexible Spending & Health Savings Accounts Life, Short and Long-Term Disability Recognition Awards & Discretionary Benefits Our Core Values: Compassion: We care about our talented and loyal PEKO family. Safety: We are committed to providing a safe, clean, and positive workplace. Integrity: We believe in transparency, honesty, and respect for all stakeholders. Agility: We are dedicated to maintaining an agile and financially prudent organization. Endurance: We foster the belief that PEKO people are resilient problem-solvers impacting the future. Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube Other: This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice. For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $21.00 - $30.00 per hour. The wage range for this role considers a wide range of factors when making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR ktZyQpOUmQ

Job Description:\n\nMMR Consulting is an engineering and consulting firm specializing in the pharmaceutical and biotechnology industries. Its services include Engineering, Project Management, and Validation.\nMMR Consulting has offices in Canada, USA, and Australia.\nWe are seeking an experienced Senior Software Verification and Validation (V&V) Engineer to support the development, integration, verification, and validation of medical devices, diagnostic systems, laboratory instrumentation, and associated software. The ideal candidate will have strong experience working in a regulated medical device, diagnostic, laboratory, or life sciences environment, with a background in software and system verification and validation.\nThis position will support new product development, software and instrument integration, technology transfer, system-level verification, software validation, and post-launch product support. The engineer will work across hardware, software, systems, laboratory, quality, and engineering functions throughout the product development life cycle.\nThis is a hands-on V&V position, not a role focused solely on writing test documentation.\nThis is a full-time, onsite position in the Rochester, NY area. Candidates must be willing and able to commute to the facility daily.\nApproximately 70% of the role will involve hands-on testing and validation activities, with the remainder involving test planning, requirements review, documentation, data analysis, defect investigation, meetings, and cross-functional engineering activities.\n\nKey Responsibilities\n\nDevelop and execute verification and validation strategies for medical devices, diagnostic systems, laboratory instruments, and associated software.\nDevelop and execute software and system-level test plans, test protocols, test cases, and test procedures.\nPerform verification and validation throughout the medical device/product development life cycle.\nTranslate system, software, and user requirements into measurable verification and validation activities.\nEstablish and maintain requirements traceability between requirements, risk controls, test cases, test execution, and test results.\nPerform hands-on testing of integrated medical device systems, instrumentation, software, and subsystems.\nExecute software validation testing, including functional, system, integration, regression, and negative testing as appropriate.\nEvaluate software/hardware interfaces and system integration to identify unexpected behavior, defects, or performance issues.\nDocument test results, deviations, anomalies, defects, and conclusions in accordance with established quality procedures.\nTroubleshoot failures and unexpected test results and work with engineering and software development teams to identify root causes and corrective actions.\nParticipate in defect investigation, resolution, retesting, and regression testing.\nSupport design verification, subsystem validation, system validation, and post-launch product support.\nGenerate and review requirements, specifications, test procedures, protocols, and validation documentation for completeness and technical accuracy.\nReview the work of other engineers and provide feedback regarding testing quality, documentation, and requirements traceability.\nSupport technology transfer and new product introduction activities.\nWork with multidisciplinary teams consisting of software, systems, electrical, mechanical, laboratory, quality, regulatory, and product development personnel.\nSupport configuration and installation of software and computer systems used in testing.\nParticipate in software/test automation activities where appropriate.\nDevelop or utilize scripts to support automated testing, data collection, test execution, and analysis.\nAdapt quickly to changing project priorities and support multiple projects as required.\n\nSoftware Verification & Validation\nThe successful candidate should have experience with software verification and validation within a regulated product development environment.\nExperience may include:\n\nSoftware requirements verification\nSoftware functional testing\nSystem integration testing\nSystem-level verification\nSoftware validation\nRegression testing\nUser requirements verification\nInterface testing\nInstallation and configuration testing\nAutomated testing\nDefect identification and tracking\nTest script development\nTest execution and results analysis\nRequirements traceability\nRisk-based testing\nSoftware/hardware integration testing\n\nExperience working with software embedded in or supporting medical devices, diagnostic instruments, laboratory systems, or regulated equipment is highly desirable.\nMedical Device V&V\nCandidates should understand the principles of verification and validation within a regulated medical device or diagnostic development environment.\nExperience with the following is highly desirable:\n\nDesign verification\nDesign validation\nSoftware validation\nRequirements management\nTraceability\nRisk-based verification\nTest protocol development\nTest execution\nDefect management\nChange control\nConfiguration management\nDesign controls\nProduct development life cycle processes\nPost-market or post-launch product support\n\nRequired Qualifications\n\nBachelor's degree or higher in Systems Engineering, Software Engineering, Computer Science, Electrical Engineering, Mechanical Engineering, Biomedical Engineering, or a related engineering/science discipline. Equivalent combination of education and directly relevant experience may be considered.\n15+ years of relevant engineering, software V&V, systems V&V, medical device validation, or regulated product development experience; candidates with strong directly applicable experience may be considered with fewer years.\nDemonstrated experience with medical device, diagnostic, laboratory, or other regulated products.\nExperience developing and executing verification and validation testing.\nExperience creating and maintaining requirements traceability.\nExperience working within a structured product development and quality environment.\nExperience troubleshooting complex software/hardware systems.\nStrong understanding of software verification and validation methodologies.\nStrong understanding of system-level verification and validation.\nExperience translating requirements into testable acceptance criteria and test cases.\nStrong technical documentation skills.\nStrong analytical and troubleshooting abilities.\nExperience with software and system integration testing.\nExperience with test automation and/or automated data collection.\nBasic programming or scripting experience using technologies such as:\nPython\nVBA\nC/C++\nOther scripting or programming languages\nExperience configuring and installing computer systems and software used for testing.\nUnderstanding of cybersecurity considerations within medical devices, laboratory systems, or connected equipment is beneficial.\n\nV&V / Quality Systems Experience\nExperience with regulated development processes and quality systems is highly desirable, including familiarity with:\n\nMedical device design controls\nSoftware development life cycle processes\nRequirements management\nRisk management\nConfiguration management\nChange control\nDefect management\nTraceability\nVerification and validation documentation\nQuality management systems\nRegulated product development\n\nDevelopment & Quality Tools\nExperience with one or more of the following is preferred:\n\nJira\nWindchill\nHP ALM / Quality Center\nSerena Business Mashups\nAligned Elements\nMicrosoft Team Foundation Server (TFS)\n\nPreferred Qualifications\n\nExperience with medical device software validation.\nExperience validating software embedded within medical devices or diagnostic instruments.\nExperience with laboratory information systems, diagnostic systems, or laboratory automation.\nExperience with clinical or diagnostic analyzers.\nExperience with automated laboratory analyzers, including VITROS® systems, is a plus.\nExperience with software test automation.\nExperience with Python, VBA, C/C++, or similar programming/scripting languages.\nExperience with assay/instrument integration.\nExperience supporting technology transfer or new product introduction.\nExperience working in a regulated medical device, diagnostics, or life sciences environment.\n\nKey Attributes\nThe successful candidate will be:\n\nHands-on: Comfortable spending significant time executing tests rather than working exclusively on documentation.\nTechnically strong: Able to understand interactions between software, hardware, instrumentation, and systems.\nDetail-oriented: Able to produce accurate, audit-ready V&V documentation and maintain rigorous traceability.\nAnalytical: Able to investigate failures, identify potential root causes, and work with development teams toward resolution.\nAdaptable: Comfortable moving between projects as priorities change.\nCollaborative: Able to work effectively with software, systems, engineering, quality, laboratory, and regulatory teams.\nIndependent: Capable of developing and executing V&V activities with appropriate judgment and minimal supervision.\n\nCompensation starts from 150k/yr based on experience and expertise.\n\nAs part of our recruitment process, we may use technology-assisted tools, including AI-enabled systems, to support application review and candidate evaluation. Hiring decisions are made with human oversight and consideration.\n\nEqual Employment Opportunity and Reasonable Accommodations\nMMR Consulting is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Our hiring decisions are based on merit, qualifications, and business needs. We are committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please let us know the nature of your request.

Job DescriptionDescription: JOB SUMMARY: The Senior Controls Engineer provides technical leadership for the architecture, integration and execution of control systems across multiple projects. This role architects multi-controller systems and cross-cell integration, defines the safety approach and validation method, and sets the architecture that other engineers build within. Given objectives and constraints, the Senior Controls Engineer determines scope and approach and is consulted before commitments are made in their platform or discipline area. The role sets technical direction across projects without supervisory authority, approves deviations from standard, leads customer design review, FAT and SAT, and serves as the named owner of a platform. JOB DUTIES & RESPONSIBILITIES: • Architect multi-controller systems, diagnostics strategy and data flow, • Define the safety approach and validation method for a system, • Design cross-cell and plant-interface networks; own the addressing convention, • Design reusable library objects; set program structure conventions, • Set HMI standards and templates across platforms, • Select and qualify new devices; lead vendor and product evaluations, • Set technical direction across projects for a platform or discipline area; approve deviations from standard, • Review AE design and quote requirements; feed back discrepancies before commitment, • Estimate controls effort and identify technical risk at quote and kickoff, • Lead customer design review, internal FAT, customer FAT and SAT, • Lead and prioritize actions on escalated issues, • Coach Controls Engineer III; develop training content; serve as named platform owner, • Order long-lead items, assign specialty items, and close out punch list and lessons learned, • Travel to customer sites for design review, commissioning readiness and customer acceptance — approximately 20% of time. Requirements: EDUCATION and/or EXPERIENCE: • Bachelor's degree in a related engineering discipline or equivalent experience, required., • 7–10 years in controls engineering, including architecture of multi-controller solutions, • Experience defining diagnostics, telemetry and safety approaches, • Cross-subsystem integration and standards leadership, • Commissioning strategy and readiness leadership, • Vendor evaluation and selection influence, • Proficient across Rockwell, Siemens and at least one SCADA platform SKILLS AND CHARACTERISTICS NECESSARY TO PERFORM THE JOB: • Software Applications Required, • Rockwell Studio 5000, • Siemens TIA Portal, • Rockwell FactoryTalk View ME and SE, • Ignition, • AutoCAD Electrical, • Software Applications Desired, • Emulate3D, • Cognex vision tooling, • Fanuc HandlingTool, RoboGuide and DCS, • Structured languages (C#, Python), • Codes and Standards — working knowledge appropriate to the level, • NFPA 79, • NFPA 70 (National Electrical Code), • NFPA 70E, • UL 508A, • ANSI/RIA R15.06, • ISO 10218 — Industrial Robot Safety Requirements, • ISO 13849 and IEC 62061 — Functional Safety, • System architecture mindset and decision quality, • Sets technical direction across projects without positional authority, • Standards creation and adoption leadership, • Risk management and verification planning, • Cross-discipline influence and alignment; facilitates design and architecture reviews, • Coaching and technical leadership across the team, • Customer-facing technical lead through design review, FAT and SAT MEASUREMENTS OF SUCCESS: • Architectures delivered that other engineers can build within without rework, • Safety approach and validation method defined and demonstrated at acceptance, • Escalated issues resolved and system performance stabilized, • Estimates and risk identification accurate against actual project outcome, • Standards adherence across projects; review findings driven to closure, • Platform ownership discharged — library current and guidance published, • Controls Engineer III engineers coached toward the next level In compliance with pay transparency requirements, the wage range for this role is $138,000 - $155,000 annually. The rate range provided is a general guideline. When extending an offer, Adaptec Solutions considers factors including but not limited to experience and geographic location. Adaptec Solutions also offers a variety of benefits including generous paid time off (PTO), 11 paid company holidays including your birthday, generous health plans, dental and vision insurance, HSA/FSA accounts, generous 401(k) match and immediate vesting, short-term/long term disability coverage and basic life/AD&D insurance and education assistance. Adaptec Solutions, LLC is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state, or local law.

Job DescriptionEmbedded Software Engineer, Staff Department: Product Design Services FLSA Status: Exempt Reports to: Design Engineering Operations Manager Pay Range: $125,000 - $152,000 annually Location: Rochester, NY The Role: D3 Embedded is seeking a highly skilled Staff Embedded Software Engineer to lead the design, development, and optimization of complex embedded systems for intelligent imaging and radar applications. This role involves defining software architecture, driving technical innovation, and solving challenging system-level issues. The ideal candidate has deep expertise in embedded C/C++, embedded imaging with CMOS cameras and similar sensors, knowledge of video pipe architectures, real-time operating systems (RTOS), microcontroller architectures, and low-level hardware interactions. As a key technical leader, this position requires strong problem-solving skills, the ability to mentor and guide engineering teams, and a strategic mindset to influence product development and long-term technology roadmaps. The Responsibilities: • All phases of the product development cycle including:, • requirements definition and architecture, • software design and development, • Software implementation, • hardware bring-up, software/hardware integration, • verification and validation, and customer support, • Embedded processors running real-time operating systems or Embedded Linux on custom electronics., • Integrating image sensors and cameras into real time embedded systems, • Designing and implementing high performance video processing pipes that use real-time image and radar data., • Technical tasks including;, • assisting with board bring-up, • developing driver and application-level code, • system verification, • Conduct and oversee code reviews, unit testing, debugging, and software/hardware integration., • Technical direction and leadership in a non-supervisory capacity for complex engineering projects, • Support project planning efforts including task definition and work effort., • Develop and evaluate plans and criteria for various projects and activities you will do., • Embedded Linux platforms, • Open-source Linux and associated SDKs, • GCC/GNU toolchain, • Developing & identifying tools / methods for better design reuse & process improvement, • Design reviews and technical oversight, • Coaching & mentoring less experienced engineers Additional Responsibilities: • Other duties as assigned The Right Person Will Have: • Bachelor of Science in Computer Science, Computer Engineering, Electrical Engineering discipline and/or equivalent years of experience, • Minimum 10 years of experience in Embedded Software role, • Excellent problem solving & troubleshooting skills., • Ability to read schematics and debug digital hardware using oscilloscope, logic analyzer, or similar tools for troubleshooting., • Experience writing embedded device drivers, • Experience debugging embedded platforms, • Knowledge of embedded software and firmware development, including C and C++., • Up to date experience with Embedded Linux platforms, configuration, board support package, kernel drivers, and device tree, • Experience using GIT version control system, • Experience developing with GCC/GNU toolchain, • Experience with embedded camera and video processing is desirable., • Self-Driven personality, • Capable of a big picture, system-oriented approach, • Solid technical leadership skills, • Strong communication and interpersonal skills. The Benefits: • Competitive total compensation, • Medical and dental coverage, • Employer paid basic life, short-term disability, and identity theft coverage, • Voluntary vision, life, long-term disability, accident, critical illness coverage, • 401k retirement contribution, • Paid holidays, time-off, and sick time, • Tuition assistance and employer paid professional development, • Flexible work schedules, • Remote opportunities available, • Complimentary snacks and beverages, • Employer sponsored social events The Company: Since our founding in 1999, D3 Embedded has driven innovation in high-performance embedded systems development. We leverage our expertise in autonomous machines, sensors, imaging, optics, edge computing, algorithms, robotics, and electrification to provide cutting-edge engineering design and low-volume manufacturing services. Headquartered in Rochester NY, we serve a global network of customers and are proudly connected with many technology leaders and Fortune 500 companies. We are interested in bright, creative, and team-oriented individuals exhilarated by the opportunity to transform the world through frontier technologies. Candidates must be eligible to work in the United States. D3 Embedded does not sponsor visas. For more information about D3 Embedded, please visit www.d3embedded.com. D3 Embedded is committed to fostering a diverse work environment and proud to be an Equal Opportunity Employer. We consider and hire applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, or membership in any other group protected by federal, state or local law. D3 Embedded participates in E-Verify, a federal program that confirms employment eligibility upon hire. Powered by JazzHR i6V7yv845S

Job Description Applications Engineer - Innovations Team Brinkman Products Brinkman Products is looking for an Applications Engineer to join our Innovations Team. This role is open to entry-level and mid-level engineers who are excited to work hands-on with manufacturing equipment and help deliver complete, turnkey manufacturing solutions for our customers. Whether you're early in your career and eager to learn, or you already have experience and are ready to take on more ownership, this role offers the opportunity to work on real projects that move from concept to production. What You'll Do As part of the Innovations Team, you'll help turn ideas into working manufacturing solutions: • Support the development, testing, and implementation of turnkey manufacturing solutions, • Work hands-on with manufacturing equipment, tooling, fixtures, and processes, • Assist with application development from concept through validation and production handoff, • Collaborate with customers to understand application needs and performance requirements, • Work closely with internal engineering, manufacturing, and sales teams, • Troubleshoot and improve processes to enhance quality, efficiency, and reliability, • Support new product introductions, customer trials, and demonstrations, • Travel to customer facilities as needed to support training, implementation, and startup of manufacturing solutions, • Help document processes, test results, and best practices Responsibilities and level of ownership will be aligned with experience, with room to grow. What We're Looking For • Entry-level: Strong interest in manufacturing, process development, and hands-on engineering, • Mid-level: 3-7 years of experience in manufacturing, applications engineering, process engineering, or similar roles, • Mechanical aptitude and comfort working in a shop or manufacturing environment, • Proficiency with SolidWorks is desired (experience creating or modifying models, fixtures, or tooling), • Lathe/Machining Experience is desired, • Curiosity, problem-solving mindset, and willingness to learn, • Ability to work collaboratively and communicate clearly with customers and teammates Why This Role Appeals to Today's Engineers • Hands-on work: This is not a desk-only engineering role, • Real impact: You'll work on solutions that go into production and directly support customers, • Growth path: Entry-level engineers receive mentorship and training; mid-level engineers gain increased ownership, • Respect for balance: We value sustainable workloads and clear expectations, • Variety: Exposure to different applications, equipment, and customer challenges What We Offer • Competitive salary based on experience, • Comprehensive medical, dental, and vision benefits, • 401(k) with company match, • Paid time off and paid holidays, • Salary Range: $70,000 to $125,000/yr. If you enjoy solving real manufacturing problems, working hands-on with equipment, and seeing your ideas become working solutions, we encourage you to apply-even if you don't meet every qualification. Job Posted by ApplicantPro

Job Description Job summary: To provide engineering and development support to ensure the most economical and feasible methods are utilized for each project. Responsible for collaborating with manufacturing, quality and engineering departments in developing appropriate quality and manufacturing practices and documentation to meet and exceed customer expectations. Essential Duties and Responsibilities: • Consults with Process Engineer and Chief Manufacturing Engineer regarding part quality requirements., • Assists with work instructions, quality plans and appropriate training documents for manufacturing and quality departments., • May consult with customer’s technical personnel regarding current and upcoming projects or concepts., • Assists with preparation of accurate cost analysis of projects and forecasts accurate delivery times for quotation process., • Able to make decisions on new production quotes and expansion of product lines for customers., • Consult with Chief Manufacturing Engineer to improve throughput, profit margins, and efficiency in manufacturing., • Works with manufacturing, quality, and engineering to reduce non-conforming material., • Provide engineering support and input to departments within company., • Assists manufacturing department in development of processes for production., • Authority to cease or allow production on parts that do not meet specs., • Participate in targeting strategic processes and skills, and participate in implementing processes, procedures, and training to accomplish those skills. Additional Responsibilities: • Performs product/process analysis for cost reduction, quality improvement, and improved efficiency, and makes recommendations., • May represent Manufacturing/Management Department on cross-function teams., • When requested, may work on special projects and various related assignments., • Performs other related duties and assignments as required.Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • Bachelors’ of Engineering Degree from a four-year college or 5 years related experience and/or training; or equivalent combination of education and experience., • The Manufacturing Engineer is expected to know customer and company requirements by reading, interpreting and understanding the necessary specifications and procedures., • Excellent written and oral communication skills. Must have the ability to translate technical data into a format and language suitable for shop floor personnel., • Strong computer skills used to create elaborate work instructions (CAD, Microsoft Office), • Ability to provide feedback to drive behaviors of employees., • Able to deal with a variety of abstract and concrete variables.

Job Description Title: Service Engineer Reports to: Service Expert Coordinator Location: DMG MORI TC Hours: Monday through Friday, 8:00am to 5:00pm Classification: Non Exempt Travel: 50% Annual Base Salary Range: $83k+ (variance in base salary offer will depend on experience level/skill set) Employment is conditioned on DMG MORI's ability to obtain and maintain any necessary export licensing. Service Engineers are expected to provide customers with maintenance and repair assistance of DMG MORI CNC machine tools on location or by telephone. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to: • Provide customers with maintenance, repair, and installation assistance of DMG MORI CNC machine tools on location or by telephone., • Creating and updating documentation of technical information., • Developing, preparing, generating, and analyzing ongoing and ad-hoc special reports pertaining to Service, • Demonstrating a willingness to help others and be a team member; often working together with Customer’s Service Engineers., • Providing assistance and training to Customer’s Service Engineers on the installation and maintenance of newer product lines., • Establish and build exemplary communication and customer service relationships with customers., • Manage difficult customer situations in a positive manner, respond promptly to customer needs and solicit customer feedback to improve service., • Other duties as assigned. Minimum Requirements: • Bachelors or Associates Degree in technical related field of study preferred., • 3-5 years of experience in electrical and mechanical troubleshooting and maintenance of CNC machine tools., • Experience working with DMG or MORI SEIKI machines, Fanuc, Mitsubishi, and/or Siemens and controls are a PLUS., • Good verbal and written communication skills with exceptional customer service orientation., • Must be able to interact and effectively communicate in person and over the phone with people at all levels of an organization., • Proven ability to read mechanical drawings, electrical schematics, and sequence (PLC) ladder diagrams., • Basic computer literacy and working knowledge of MS Word, Excel, and Outlook., • Must be adaptable to changes in the work environment; manage competing demands and able to deal with frequent change, delays or unexpected events., • Minimum of 50% travel in multi-state region; drive or fly depending on distance. Employee is expected to work at the Technical Center when not visiting customers. Work Environment: Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. General office environment experienced at DMG MORI office. Physical Demands: Frequent: Travel, operating a vehicle, sitting, standing, walking, bending, squatting, stooping, and reaching. Pushing, pulling, and lifting objects. Repetitive foot, leg, hand, arm, shoulder, and torso movements. Periodic: Operating power equipment, sitting at desk, utilizing computers and phones. Occasional: Lifting or moving up to 50lbs. We are an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse screening

Job Description Job summary: To provide engineering and development support to ensure the most economical and feasible methods are utilized for each project. Responsible for collaborating with manufacturing, quality and engineering departments in developing appropriate quality and manufacturing practices and documentation to meet and exceed customer expectations. Essential Duties and Responsibilities: • Consults with Process Engineer and Chief Manufacturing Engineer regarding part quality requirements., • Assists with work instructions, quality plans and appropriate training documents for manufacturing and quality departments., • May consult with customer’s technical personnel regarding current and upcoming projects or concepts., • Assists with preparation of accurate cost analysis of projects and forecasts accurate delivery times for quotation process., • Able to make decisions on new production quotes and expansion of product lines for customers., • Consult with Chief Manufacturing Engineer to improve throughput, profit margins, and efficiency in manufacturing., • Works with manufacturing, quality, and engineering to reduce non-conforming material., • Provide engineering support and input to departments within company., • Assists manufacturing department in development of processes for production., • Authority to cease or allow production on parts that do not meet specs., • Participate in targeting strategic processes and skills, and participate in implementing processes, procedures, and training to accomplish those skills. Additional Responsibilities: • Performs product/process analysis for cost reduction, quality improvement, and improved efficiency, and makes recommendations., • May represent Manufacturing/Management Department on cross-function teams., • When requested, may work on special projects and various related assignments., • Performs other related duties and assignments as required.Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • Bachelors’ of Engineering Degree from a four-year college or 5 years related experience and/or training; or equivalent combination of education and experience., • The Manufacturing Engineer is expected to know customer and company requirements by reading, interpreting and understanding the necessary specifications and procedures., • Excellent written and oral communication skills. Must have the ability to translate technical data into a format and language suitable for shop floor personnel., • Strong computer skills used to create elaborate work instructions (CAD, Microsoft Office), • Ability to provide feedback to drive behaviors of employees., • Able to deal with a variety of abstract and concrete variables.

Job DescriptionDescription: Position Summary The Manufacturing Engineer is responsible for developing, optimizing, and sustaining manufacturing processes to support efficient, high-quality production. This role involves analyzing products and production methods to improve both new and existing operations. Working collaboratively within a cross-functional team environment, the Manufacturing Engineer applies technical expertise to drive continuous improvements that reduce cycle times, enhance product quality, and deliver measurable cost savings. Duties and Responsibilities • Design and implement robust manufacturing processes to ensure product stability, establish production standards, and support ongoing process improvements., • Optimize and innovate manufacturing methods, equipment operations, and overall production performance to enhance efficiency and reduce waste., • Collaborate cross-functionally with engineering, production, and other departments to troubleshoot issues and resolve production challenges., • Research, recommend, and integrate new technologies and systems to upgrade manufacturing capabilities and drive innovation., • Prepare accurate and timely quotes in response to customer deadlines, ensuring feasibility and alignment with production capabilities., • Design and develop end-to-end manufacturing solutions including processes, tooling and fixtures, CNC programs, and detailed work instructions. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insuranceRequirements: Qualification Requirements • Bachelor’s degree in Engineering preferred., • Prior experience as a Manufacturing Engineer or in a similar role is strongly preferred., • Proficient in CAD/CAM software, including SolidWorks, Mastercam, and PartMaker., • Knowledge of CNC manufacturing equipment and quality assurance methodologies., • Skilled in Microsoft Office Suite and experienced with ERP systems., • Strong project management, problem-solving, and multitasking capabilities., • Demonstrated commitment to maintaining health and safety standards., • Able to work both independently and collaboratively within a team environment. Environment & Physical Demands • Regularly required to stand, walk, stoop, kneel, crouch, and communicate effectively (talk/hear)., • May involve prolonged periods of both sitting and standing depending on task requirements., • Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; prolonged magnified inspection may be required, which can lead to eye strain., • Requires good hand-eye coordination and dexterity in hands, arms, and fingers, including the ability to grasp and manipulate small components., • Frequent use of computers and other standard office or manufacturing equipment., • May involve handling of oils, solvents, and cleaning solutions—lab coats provided to minimize exposure., • Typically performed in a clean environment; employees are expected to help maintain cleanliness standards., • Safety glasses are required at all times; additional safety training may be required depending on the area., • The work is performed in a manufacturing setting where noise levels are generally loud., • May rotate between different workstations or shift tasks during the production process based on operational needs.

Job DescriptionJOB SUMMARY Under the direct supervision of the Quality Director, the Quality Control Engineer evaluates the Quality System and the manufacturing process to provide information for quality improvement by monitoring, testing and reporting on the quality of materials and products. ESSENTIAL FUNCTIONS Essential functions of this job include, but are not limited to, the following: • Promote and support the requirements and principles of the Precise Quality Management System and AS9100., • Compile and submit product qualification packages using various customer formats (i.e. APQP, HPQP, PPAP)., • Submit and manage SCARS and waivers using customer software and computer portals., • Manage the receiving inspection process., • Perform final review for Harris RF parts., • Determine and implement quality improvement parameters by identifying statistical methods relevant to manufacturing processes., • Develop sampling plans by applying attribute, variable and sequential sampling methods., • Perform internal audits. KNOWLEDGE, SKILLS, AND ABILITIES • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Must be self-motivated and take the initiative to complete tasks., • Knowledge of the PPAP, APQP and HPQP processes, and their documentation requirements., • Analytical and observation skills., • Decision making skills., • Ability to discern variances in detail work., • Knowledge regarding quality requirements and standards prescribed by our customers., • Excellent written and interpersonal communication skills., • Good problem-solving abilities using systemic, logical and sequential approaches., • Proficient computer skills with an aptitude in Excel, Word and statistical software., • Knowledge of ISO /AS9100 requirements. EDUCATION AND EXPERIENCE • Minimum 5 years of experience, • Experience in technical troubleshooting, • Experience with ISO/AS9100 requirements, • Experience in PPAP/HPQP submittals JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $25.00 - $43.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Gender/Sexual Orientation/Gender Identity/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203.

Job Description Mersen is a global expert in electrical specialties and advanced materials for high-tech industries. Present in 32 countries with 50 industrial sites and 24 R&D centres, Mersen develops custom solutions and supplies key products to meet the new technological challenges that will shape tomorrow's world. For more than 130 years, Mersen has been constantly innovating to support and satisfy its customers' needs with the same high standards. Be it in wind power, solar power, electronics, electric vehicles, aeronautics, space or countless other sectors, wherever technology is progressing, you will always find a bit of Mersen. Main missions The Process Technician shall be the liaison between Engineering and Manufacturing, ensuring new products are successfully transitioned from design to manufacture in a way that optimizes quality and efficiency. In addition, the Process Engineer will improve existing product designs and current production methods. In conjunction with the Manufacturing Manager, the Process Engineer is responsible for the overall performance of the operation including quality, delivery, cost, and safety. A strong focus is to be placed on improving product quality and production efficiency to drive down cost. Main duties • Act as the liaison between manufacturing and engineering regarding manufacturing methods, materials, and problem resolution, • Develop manufacturing process with the goal of error proofing assembly process to drive down scrap and rework, • Drive improvement to manufacturing methods, part routings, bills of material, and material utilization to increase overall manufacturing efficiency, • Develop detailed Work Instructions to aid in complex assembly steps, • Support fabrication and assembly operators with technical issues escalating to engineering if required., • Participate fully with the engineering and operations teams to develop and execute solutions to product design and process problems, • As needed, create additional, detailed assembly drawings to minimize the likelihood of errors, • Participate fully in the change request process, • Support and help drive safety improvements across the manufacturing areas, • Actively participate in product design reviews, • Support and help implement Lean improvements across the manufacturing areas, • Train operators as needed on new methods and processes, • Support other company departments and customers as required Requested Knowledge, Competencies and Abilities: • Associates degree or equivalent experience, • Must have solid problem solving, decision making, and communication skills, • Self-motivated, • Highly organized, • Good team player, • Demonstrated leadership skills, • Understanding of drafting standards, geometric tolerances, and interpretations to various standards, • Understand process control, capabilities, and various methods of manufacturing preferred, • Understand CNC machine shop practices, processes, tooling and theory of machining preferred, • Must have a valid driver’s license, • Must be a US citizen and willing to work on military products Compensation Data Salary Range: $25.00 / hr - $35.00 / hr All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. The job titles do not mean the male variant but stand for the gender-neutral designation of the profession according to wikipedia. People are welcome regardless of gender, origin, sexual orientation, and religion.

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9002, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: In this position, the Quality Engineer works as a direct liaison between Manufacturing, Engineering and Quality to ensure the shop floor is effective in producing quality product for our customers. It is the responsibility of the Quality Engineer to implement measurement control processes, sampling systems, procedures and statistical techniques with the operators and technicians. Throughout this process, the Quality Engineer performs the necessary shop training to ensure compliance with all quality standards and requirements. Minimum Qualifications: • Excellent verbal and written communication skills with formal technical writing education as an asset, • Have a team player attitude that promotes commitment, reliability and follow through, • Detail oriented with strong organizational skills, • Have the ability to prioritize workload to meet deliveries with multiple work assignment challenges, • Proven record of strong leadership and motivational skills coupled with sound decision making capabilities, • Ability to resolve problems using logical, systematic and sequential approaches, • Good computer skills with a proficiency in Microsoft Word, Excel, and other statistical software such as Mini-Tab, • Ability to read and understand blueprints at an advanced level, • Solid understanding and application of Geometric Dimensioning and Tolerancing, ASME Y14.5M, • Experience with and knowledge of ISO / TS requirements, • Three years or more of manufacturing / sheet metal / welding fabrication knowledge preferred, • Five years or more of experience as a Quality Technician in a manufacturing business environment preferred, • Skillful in operating a CMM and writing measurement programs in compliance with print specifications Departmental Specific Duties: • Review all new project release packages in verification that customers specifications are achievable, • Implement inspection plans for all new projects and update existing projects as necessary, • Conduct training with shop personnel on new projects and resolve any quality related questions, • Provide feedback to Engineering with any process changes, • Protect the company’s interests by learning our customers specifications and act as a resource for others, • Ensure adherence to Company Quality procedures, documenting exceptions to Manufacturing and Quality management Measurement Tools: • Developing inspection processes that produce both the quality and economic results quoted, • Meeting promised due dates on all customer proposal requests, • Continuous improvement with implementation and development of advanced technology for manufacturing, • Have a “team player” attitude that promotes commitment, reliability and follow through This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology — video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you’re an installation technician, service technician, engineer, or project manager, you’ll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal—build a meaningful career while protecting what matters most through innovative security technology. Job Description What to expect as a Commercial Security Installation Technician III: • Assist the Project Manager regarding on-site scheduling of work activities and timely delivery of equipment, • Responsible for the connection of control panels, application requirements, wire concealment, and security software installation, • Install, program and configure commercial electronic security systems for enterprise commercial clients (door access control, CCTV, intrusion detection, low voltage communication, electronic locks, point sensors, signaling devices, ect.), • Troubleshoot new installations to ensure the systems are functioning properly and satisfy codes, • Demonstrate Allied Universal’s core values as a highly skilled leader on the Installation Team, • Supervise several teams comprised of Security Installation Technician I’s and II’s, • Manage several medium- to large-sized jobs simultaneously, doing so within approved hours and margin tolerances, • Drive to client sites with a company-issued vehicle to perform the system installation and confirm the system is operating effectively and meets contract requirements, • Installation of electrical wiring, panels, cables, and security devices, • Completes miscellaneous tasks as assigned by manager What knowledge and skills are required: • A high school diploma or equivalent is required, • Minimum 2-3 years of experience in the physical security, fire alarm or low voltage communication industry installing field devices, programming systems, and running medium- to large-sized jobs, are required, • Experience with any or all of the following is preferred: Software House, Lenel, AMAG, S2, Brivo, Milestone, Exacq, Axis, Bosch, Commend, DMP, Open Options, Notifier, Fluidmesh or ONSSI, • Possess or have the ability to obtain proper state licensing once hired (Low Voltage D license, Alarm Installer Lic. etc.), • Ability to meet deadlines and work in a fast-based environment with minimum direction, • Good communication skills for effective interaction with internal and external customers, • Strong troubleshooting skills and mechanical aptitude, • Ability to be on-call on a rotational basis, • Must be detail-oriented and organized Must possess a valid driver’s license with at least one year of driving experience, a clean driving record (no major violations within the last 36 months, no more than 1 accident in last 24 months, no more than one minor moving violation in last 24 months), a minimum level of insurance as required by company policy, and the ability to safely operate a vehicle. • Ability to complete time entry from home on a daily basis via the Internet, • Ability to deliver product familiarization training to end-users, • Strong proficiency in Microsoft Office products (Word, Excel, and Project), • Ability and track record of successfully loading servers with third-party applications and deploying IP video solutions, • Possess general working knowledge of network architecture, • Overnight travel may be required on an as-need basis BENEFITS: • Pay: $40 - $48 hourly, • Medical, dental, vision, retirement plan, basic life, AD&D, and disability insurance, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time is offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-26 Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: www.aus.com If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: www.aus.com/offices. Requisition ID 2026-1641772

Job Description Senior Systems Engineer | MSP Full-Time | 100% On-Site | $80,000–$100,000 + Bonus & Commission You know the person everyone calls when the easy fixes don't work. You've spent years troubleshooting networks, managing servers, securing environments, working through Microsoft 365 issues, handling migrations, and figuring out problems that don't come with step-by-step instructions. Maybe you've spent your career inside an MSP. Maybe you've consulted independently. Maybe you've even run your own IT business and discovered that you love the technology, clients and problem-solving a lot more than you love owning every single responsibility that comes with running a company. If that sounds familiar, this could be a very interesting next move. TES Staffing is partnering with a a small, established IT services company looking for an experienced Senior Systems Engineer to join its eight-person team. This isn't a highly segmented corporate IT department where networking belongs to one team, servers to another and cybersecurity to someone else. It's an MSP. That means you need to know a lot about a lot, and when something breaks, you need to be comfortable figuring it out. What You'll Be Doing You'll work alongside the senior technical leadership to manage and support client IT environments from end to end. Your work will include: • Managing client networks from internet connection through endpoints, • Troubleshooting complex network, server and systems issues, • Deploying and migrating servers and Active Directory environments, • Supporting Microsoft 365 tenants, • Managing network security and helping protect client environments from interruptions and breaches, • Working with next-generation firewalls, including platforms such as SonicWall and Fortinet, • Configuring and troubleshooting VLANs and managed Ethernet switches, • Supporting hypervisors and virtual server environments, • Managing backup, recovery and restoration processes, • Identifying infrastructure, security and technology improvements for existing clients, • Working directly with clients to explain issues, recommend solutions and get problems resolved, • Occasionally traveling to client locations throughout the region, including Buffalo and Syracuse, • Participating in a rotating after-hours/on-call schedule when client needs require it This is not a position where every unfamiliar issue gets escalated to someone else. You'll have access to all internal systems, tools and knowledge base, but you'll be expected to investigate, troubleshoot and take ownership. Who Will Thrive Here We're looking for someone who has already developed serious technical instincts. You don't need someone standing over your shoulder. When you encounter something you haven't seen before, your instinct is to research it, test it, read the documentation and work the problem. Technology isn't simply something you happen to do for work. You genuinely enjoy it. You keep up with what's changing. You read about new threats, products and tools. You probably have a home lab, a stack of saved technical articles, or at least a tendency to wonder, "There's got to be a better way to do this." You also understand the reality of working for an MSP: priorities can change quickly. A normal morning can turn into three unrelated client problems before lunch. You can move between projects, tickets and conversations without losing track of what matters. And because you'll interact directly with clients, you can translate technical information into clear, professional language without making someone feel foolish for not understanding the technology. What We're Looking For Ideally, you bring: • 10+ years of progressive IT experience, with strong preference for significant MSP experience, • Advanced network and systems administration experience, • Strong knowledge of TCP/IP and network protocols, • Experience with VLANs and managed switches, • Experience with next-generation firewalls such as SonicWall and/or Fortinet, • Strong Microsoft 365 administration experience, • Server deployment and Active Directory migration experience, • Hypervisor and virtual server experience, • Working knowledge of cybersecurity and compliance requirements, • Experience working within RMM, PSA and ticketing environments, • Excellent troubleshooting and critical-thinking skills, • The ability to manage multiple priorities in a fast-moving environment, • Strong written and verbal client communication skills, • A valid driver's license and ability to travel to client locations as needed Industry certifications are welcomed, but they're not a substitute for hands-on experience. We are far more interested in what you can actually diagnose, build and solve. This May Be Especially Interesting If... • You've worked independently, consulted, freelanced or owned a small IT/MSP business yourself., • You liked being the person who could solve almost anything — but you're ready to leave behind the sales pipeline, payroll, bookkeeping, staffing, insurance, collections and 2 a.m. worry that come with owning the whole operation., • Here, you can bring that same breadth of experience to a small team where your judgment matters, without having to carry the entire business on your shoulders. Compensation & Benefits Base salary: $80,000–$100,000, depending on experience and overall compensation needs. The full comp package also offers: • Annual bonus opportunities based on company performance, • 2% commission on qualifying technology/product sales generated through existing client relationships, • Health insurance with 50% employer contribution, • Dental and vision coverage, • SIMPLE IRA retirement plan, • Paid sick time and accrued vacation/PTO, • Paid federal/bank holidays, • Frequently shortened, fully paid workdays before holidays, • Mileage reimbursement for client travel, • Additional compensation for qualifying after-hours service calls And because this is a small company, there's something else that's harder to put into a benefits chart: flexibility when life happens. The team works hard, but family matters, too. Schedule & Environment This is a 100% in-office position with a typical schedule of 8:00 AM–5:00 PM. Team members rotate responsibility for the occasional evening, weekend or after-hours need. Those situations are the exception rather than the everyday schedule. The environment is casual, straightforward and hands-on. Jeans and a polo are perfectly normal. The Interview Process We're going to be transparent: there is a technical interview. The process begins with a conversation to make sure the opportunity makes sense on both sides, followed by a technical discussion with leadership. This isn't designed to trip you up with obscure trivia. It's designed to answer a much more important question: Can you actually do the work? If you've spent years inside real client environments solving real infrastructure problems, you'll finally get the opportunity to talk with people who understand exactly what that takes. \nCompany Description TES Staffing is a regional staffing and HR services company. We work with Western NY's top companies to offer our applicants a wide variety of choices when looking for their next career opportunity. We will work with you to identify your strengths and try to match you up with the right job opening we have at that point in time. We look forward to working with you and cannot wait for you to create your future together! TES Staffing is a regional staffing and HR services company. We work with Western NY's top companies to offer our applicants a wide variety of choices when looking for their next career opportunity. We will work with you to identify your strengths and try to match you up with the right job opening we have at that point in time. We look forward to working with you and cannot wait for you to create your future together!

Job Description Overview Now Hiring: Senior Electrical Engineer Location: Albany, NY Schedule: Full Time What’s in It for You Compensation: $130,000 to $150,000 Benefits: • 401K with company match, • Medical, dental, and vision coverage with multiple plan options, • Employer-sponsored short-term disability insurance, • Additional voluntary benefits, • Employee Assistance Program (EAP), • Paid vacation, • 5 paid sick days annually (front-loaded), • 10 paid holidays, • Tuition reimbursement, • Strong support for continuing education and career advancement Who We Are More than the sum of our parts — Vitrek is one company, driving innovation through a family of industry-leading brands — Vitrek, GaGe, and MTI Instruments enable breakthroughs in a variety of industries by delivering high-precision, easy-to-use test and measurement products that enable better quality, and the in-process collection of critical test data. Vitrek designs and manufactures products for: • Hipot testing, • Power Analysis, • Jet Aircraft Engine Balancing, • Semiconductor metrology, • High Speed Data Acquisition About the Opportunity Join Vitrek as a Senior Electrical Engineer and play a key role in shaping the next generation of precision instrumentation. Based in our Albany, NY engineering center of excellence, you’ll lead system-level design initiatives while collaborating with a high-performing team of electrical and software engineers. This is an exciting opportunity for an experienced engineer who thrives in a hands-on environment and is passionate about delivering high-performance, low-noise analog solutions. You’ll report directly to the Vice President of Engineering and have the opportunity to influence both new product development and the evolution of our existing product portfolio. What You’ll Do • Lead digital, analog and mixed-signal circuit design, including:, • Component selection, • SPICE simulation, • Schematic capture, PCB layout, and BOM development, • Debugging and validation, • Design and optimize circuits with a focus on low-noise performance and stability, • Conduct circuit performance testing and analysis, • Support legacy products and ongoing production efforts, • Provide application and technical support as needed, • Contribute to project leadership and mentor junior engineers (as applicable) What You Bring • BS or MS in Electrical Engineering from an ABET-accredited program, • 5+ years of post degree work experience., • Strong experience with mixed-signal systems and debugging, • Eligibility to work in the United States, • Willingness to travel occasionally (less than 10%, domestic/international) Nice to Have • Experience with low power switching inverters (<50W), • Design of low and ultra-low noise amplifiers (op-amps and discrete), • Audio amplifier design experience, • Active analog filter design, • Exposure to RF circuit design and testing Ready to Apply? If you’re excited about designing cutting-edge analog systems and want to make a real impact, we’d love to hear from you.

Job DescriptionDescription: About Us: Founded in 1997, Vuzix (NASDAQ: VUZI) is a growing, dynamic company that specializes in the design, manufacturing and sale of smart glasses and augmented reality (AR) technologies and products for the enterprise and consumer markets. Company products include wearable displays and computing devices that offer portable, high-quality viewing experience for applications in augmented reality, digital information, utility, and entertainment. Position Summary: The Optical Waveguide Engineer will support R&D, new product development and production while directly reporting to the Optics group. It will be their primary responsibility to deliver diffractive waveguide designs to support new product development and internal research programs. They will work within a multidisciplinary team to manufacture, test, and implement these new diffractive waveguide designs. Essential Duties & Responsibilities: • Subject matter expert on physical optics., • Proven understanding of diffractive optics, geometric optics, and polarization., • Deliver new imaging AR/VR waveguide designs to support product requirements., • Experience going from concept to prototype to product., • Help advance the state of the art for waveguide technology., • Support modeling and metrology teams to validate designs., • Work with Mechanical, Manufacturing and Optical Engineers on joint design efforts., • Drive process improvement within product development and manufacturing., • Research novel technologies., • Develop and maintain relationships with vendors. Competencies: To perform this job successfully, an individual should demonstrate the following competencies: Written Communication – Read and interpret written information effectively, write clearly and concisely, adapt writing style for different audiences. Verbal Communication – Give focused attention to what others are saying, take time to understand what and respond when appropriate without interrupting, speak clearly and effectively express ideas and opinions, adapt and react professionally in both positive and negative situations. Teamwork & Collaboration – Balance team and individual responsibilities, consider others’ views objectively and with openness to changing your own, give and encourage feedback, contribute to a positive team dynamic, prioritize team success over personal interests, work effectively across departments toward company goals. Professionalism – Interact with others in a considerate manner, follow through on commitments, react well under pressure and preserve confidentiality, control emotions, and accept responsibility, maintain focus on solutions and treat others with respect and consideration regardless of their status or position. Motivation & Initiative – Demonstrate persistence and ability to adapt to changes in daily workflow, overcome obstacles, request and provide help as needed, and work independently. Volunteer readily and look for ways to improve and create successful outcomes, positively contributes to overall work environment. Respect & Integrity – Treat people with respect, work ethically and with honesty and integrity, inspire the trust of others, demonstrate appreciation and sensitivity for cultural differences, help promote inclusion and understanding of the value of diversity, embrace differences and support a harassment-free environment. Requirements: Minimum Qualifications: • MS in Physics or Optical Engineering or related discipline - PhD preferred., • Minimum 5 years of related experience., • Design experience with imaging waveguides., • Experience with needs of AR/VR/MR systems., • Proficient with standard optical design software, Zemax, CODE V, Virtual Lab, LightTools, or FRED., • Strong problem solving and statistical analysis skills., • Ability to work within a multidisciplinary team., • Ability to communicate ideas and concepts within a group., • Program management experience a plus., • Leadership experience preferred. Supervisory Responsibilities: This position does not have supervisory responsibilities Travel: Negligible. Physical Demands: Frequently required to sit, speak, hear, see, and perform repetitive motion (data entry). Occasionally required to lift or carry (10 lb. minimum). Reasonable accommodations will be made if possible. Vuzix Corporation is an Equal Employment Opportunity (EEO) Employer. We consider applicants without regard to race, color, religion, creed, gender, national origin, age, disability, marital or veteran status, or any other legally protected status. We are committed to recruiting and employing the best talent available.

Job Description Title Packaging Engineer Department Manufacturing Engineering Reports to Director of Production Engineering SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Position Overview: The Packaging Engineer is responsible for the design, development, validation, and continuous improvement of packaging solutions used to protect precision optical components and assemblies throughout manufacturing, storage, and customer delivery. This role supports both internal product movement and external shipment, ensuring components remain protected from damage, contamination, and handling risks while meeting customer, quality, and regulatory requirements. Working closely with Operations, Quality, Engineering, and Supply Chain teams, the Packaging Engineer will develop practical packaging systems that improve product protection, support manufacturing flow, reduce handling risk, and enhance operational efficiency. The ideal candidate combines strong engineering fundamentals with hands-on problem-solving skills and experience supporting high-value, fragile, or precision-manufactured products. Key Responsibilities: • Design, develop, and implement packaging solutions for precision optical components, assemblies, and finished products., • Engineer reusable trays, totes, fixtures, and handling systems used throughout the manufacturing process., • Develop customer-facing packaging solutions that meet product protection, cleanliness, transportation, and regulatory requirements., • Evaluate packaging performance through drop, vibration, compression, environmental, and distribution testing., • Select, qualify, and validate packaging materials suitable for precision optics and environmentally controlled manufacturing environments., • Create and maintain packaging drawings, specifications, work instructions, bills of material, and engineering change documentation., • Collaborate with Operations, Quality, Supply Chain, and Engineering teams to ensure packaging supports efficient product flow and product protection., • Investigate packaging-related quality issues, shipping damage, and handling concerns and implement corrective actions., • Standardize packaging solutions across product families where appropriate to improve consistency and reduce costs., • Support new product introduction activities by developing packaging requirements and validation plans., • Analyze packaging costs, material utilization, and operational efficiency to identify improvement opportunities., • Lead continuous improvement initiatives focused on damage reduction, handling efficiency, storage optimization, and packaging performance., • Support customer packaging requirements, audits, and packaging-related technical inquiries as required. Required Qualifications: • Bachelor's degree in Packaging Science, Packaging Engineering, Mechanical Engineering, Industrial Engineering, or a related technical discipline., • Minimum of 5 years of experience in packaging engineering supporting manufacturing environments., • Experience developing packaging solutions for precision components, medical devices, electronics, aerospace products, optics, semiconductor products, or other fragile/high-value products., • Proficiency with CAD software, preferably SolidWorks, for the design of packaging components, trays, fixtures, and handling systems., • Experience performing packaging validation testing and familiarity with ISTA, ASTM, and other industry-standard test methods., • Demonstrated ability to design custom packaging, trays, dunnage, and protective handling solutions., • Experience selecting and qualifying packaging materials including foams, plastics, engineered corrugates, protective films, and specialty materials., • Familiarity with product handling, contamination control, ESD protection, or cleanroom-compatible packaging practices is strongly preferred., • Experience creating engineering drawings, specifications, bills of material, and engineering change documentation., • Strong analytical, troubleshooting, and root-cause problem-solving skills., • Effective communication skills and ability to work cross-functionally with engineering, manufacturing, quality, and supply chain teams., • Experience supporting new product introduction (NPI), manufacturing transfer, or product launch activities is preferred. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match and Tuition Reimbursement opportunities., • Health, dental, vision, HSA, & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Work Environment & Physical Demands: • Works in a precision manufacturing environment supporting production operations, with regular time spent on the manufacturing floor and in engineering or office settings., • Frequent interaction with production personnel, manufacturing equipment, tooling, and assembly processes in support of troubleshooting, process development, and continuous improvement activities., • Requires prolonged periods of standing, walking, and moving throughout production areas, with occasional sitting for engineering, documentation, and project-related work., • Regular use of hands for computer work, documentation, handling components, tooling, fixtures, and measurement equipment., • Requires visual acuity for reviewing technical documentation, inspecting components and assemblies, and supporting process verification activities., • Exposure to typical manufacturing conditions, including moving mechanical equipment, moderate noise levels, airborne particles, cleaning agents, adhesives, oils, and solvents., • Required use of personal protective equipment (PPE), including safety glasses and cleanroom or controlled-environment garments, as required by specific production areas., • Occasional lifting or movement of materials, tooling, fixtures, or equipment, typically up to 50 pounds., • May require schedule flexibility or extended hours to support production priorities, troubleshooting activities, or project implementation deadlines. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. This position is scheduled for Monday through Friday, 7:00 AM – 3:30 PM. As an engineer supporting multiple production operations, occasional flexibility outside normal business hours may be required to support manufacturing priorities, project implementation, troubleshooting activities, or critical production needs.

Job Description Title Quality Engineer Department Quality Reports to Quality Manager Position Overview: As a Quality Engineer, you will play a key role in ensuring the quality, reliability, and performance of precision optical components and assemblies by providing technical quality support throughout the manufacturing process. This is a hands-on engineering role that combines technical problem-solving, product inspection, testing, and quality systems support. You will work closely with Manufacturing, Engineering, Supply Chain, and other departments to support quality initiatives, investigate product nonconformance's, resolve quality issues, and establish inspection and testing methods that meet customer and internal requirements. You will also support the ongoing development and maintenance of our ISO 9001 quality management system, participate in audits, and help ensure our products and processes meet the specifications and standards required by our customers. Key Responsibilities: • Provide technical quality support to QC Inspection, Manufacturing, and Engineering, helping ensure precision optical components and assemblies meet customer specifications and quality requirements., • Interpret optical and mechanical drawings, specifications, standards, and customer requirements to establish inspection criteria, support risk analysis, and guide quality-related decisions., • Investigate product nonconformance's and quality issues, work with cross-functional teams to identify root causes and implement effective corrective actions to prevent recurrence., • Support the development and maintenance of the ISO 9001 quality management system, including leading and participating in internal audits, supporting external audits, and managing quality documentation and records., • Develop and maintain inspection instructions, quality plans, test plans, and testing procedures, and coordinate environmental, durability, reliability, and other product testing as required., • Evaluate and recommend inspection and test equipment, coordinate calibration activities, and assess the adequacy of measurement systems to ensure accurate and reliable inspection results., • Lead and participate in quality improvement initiatives, including FMEAs, Design of Experiments (DOEs), Design for Manufacturability (DFM) reviews, and other activities focused on improving product quality and process consistency., • Manage quality-related activities associated with new and existing programs, including First Article Inspection (FAI) submissions, supplier quality documentation, Engineering Change Orders (ECOs), and customer requirements., • Manage corrective and preventive actions (CAPAs), review and disposition customer returns and product nonconformance's, and work with Supply Chain to address supplier quality concerns and improve supplier performance., • Train and support employees in inspection techniques, measurement equipment, testing procedures, and quality-related practices while identifying opportunities to strengthen quality, consistency, and efficiency across the organization. Required Skills & Qualifications: • Bachelor’s degree in Quality, Engineering, Optics, Engineering Technology, or a related field required. An equivalent combination of education and relevant experience may be considered., • 5+ years of experience in quality engineering, manufacturing, optical manufacturing, or a related technical field., • Experience with quality inspection equipment, measurement systems, and inspection techniques., • Ability to interpret optical and mechanical drawings, specifications, and customer requirements., • Working knowledge of ISO 9001 quality management systems and quality assurance practices., • Strong analytical and problem-solving skills, with the ability to investigate nonconformance's and implement corrective actions., • Familiarity with quality engineering tools such as FMEA, DOE, FAI, SPC, and Gage R&R., • Experience with environmental and reliability testing is preferred., • Familiarity with AS9100, AS9102, MIL-STD-810, MIL-PRF-13830, and ISO 10110 is preferred., • Proficiency with Microsoft Office; experience with Minitab is a plus., • Strong written and verbal communication skills, with the ability to work independently and collaborate effectively across departments., • ASQ certification, such as Certified Quality Engineer (CQE), is preferred. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude; Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match and Tuition Reimbursement opportunities., • Health, dental, vision, HSA, & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Environment & Physical Demands: • Work is performed in a controlled manufacturing environment requiring adherence to contamination control practices, including the use of protective garments such as frocks and hair coverings., • Requires use of appropriate personal protective equipment, including safety glasses and cleanroom garments., • Position involves a combination of standing, walking, and sitting for extended periods, along with occasional stooping, kneeling, and reaching., • Regular use of computers and standard assembly or inspection tools, • Ability to lift up to 50 lbs. as needed. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Work Schedule: Monday – Friday, 7:00 AM – 3:30 PM. This position follows a consistent first-shift schedule, with occasional flexibility in hours as needed to support business and operational needs

Company Description \n Micro Instrument Corp specializes in designing and building custom assembly and test automation systems tailored to unique manufacturing needs. From medical products to automotive parts, we collaborate closely with clients from early product development stages to deliver innovative, cost-effective automation solutions. Based in the Rochester, New York Metropolitan Area, our services include proof of concept, prototyping, system design, and ongoing equipment support. At Micro, we prioritize efficiency and partnership, ensuring our clients can bring high-quality products to market faster. \n \n Role Description \n We are seeking a full-time, on-site Senior Application Engineer to join our team in the Rochester, New York Metropolitan Area. This role involves understanding client specifications, developing concepts and pricing those concepts to provide written proposals for custom automation solutiions to Micro's clients. The effort includes working with mechanical and electrical engineering as well as Micro's mechanocal and controls technicians. Day-to-day responsibilities include providing or researching technical solutions to support our clients needs. Occasionally visiting customers sites to get first hand views of present processes. The Senior Application Engineer will also work closely with vendors to optimize performance, and contribute to developing innovative manufacturing solutions for various industries. \n \n Qualifications \n\n • Experience in Technical Support with troubleshooting and resolving complex system issues\n, • Proficiency in mechanical /engineering and familiarity with relevant hardware often integrated into automation\n, • Expertise in Mechanical Engineering with a focus on system design and assembly\n, • Hands-on experience in Testing of systems to ensure performance and reliability\n, • Strong time management skills and ability to work collaboratively in a multidisciplinary environment\n, • Bachelor's degree in Engineering or a related field\n, • Prior experience in industrial automation or manufacturing is an advantage\n

iWorld Professionals is seeking a Quality Engineers for an exciting on-site opportunity in Rochester NY. We are open to candidates ranging from early-career engineers looking to build their quality expertise to experienced Quality Engineers who can take ownership of complex quality challenges and continuous improvement initiatives. \n \n This is an excellent opportunity for someone who enjoys working at the intersection of engineering, manufacturing, quality, and customer requirements. You’ll work alongside technical and operations teams to improve processes, investigate quality issues, reduce defects, and ensure products meet rigorous industry standards. \n \n Quality Engineer Position Responsibilities: \n\n • Partner with engineering, manufacturing, operations, and supplier quality teams to identify and reduce product and process defects.\n, • Review engineering drawings, specifications, manufacturing processes, and quality requirements for compliance.\n, • Investigate quality issues and support root cause and corrective action (RCCA) activities.\n, • Use structured problem-solving methods such as 8D, 5 Why, DMAIC, and similar quality tools.\n, • Evaluate nonconforming materials and help determine appropriate disposition and corrective actions.\n, • Analyze quality data and identify trends, risks, and opportunities for improvement.\n, • Support continuous improvement initiatives designed to improve quality, reliability, and manufacturing performance.\n, • Collaborate with customers and internal teams to resolve quality concerns and clarify technical requirements.\n, • Review manufacturing processes and documentation before release and following engineering or process changes.\n, • Participate in new product development and introduction activities.\n, • Support internal, customer, and regulatory quality audits.\n, • Maintain accurate quality documentation and system records.\n\n \n Quality Engineer Requirements: \n We are interested in candidates at multiple experience levels. You do not need to have every preferred qualification to be considered. \n\n • Associate or bachelor's degree in Mechanical Engineering, Electrical Engineering, Manufacturing Engineering, Industrial Engineering, Quality Engineering, or a related technical field.\n, • Entry-level candidates with relevant education, internships, co-op experience, or hands-on manufacturing exposure are encouraged to apply.\n, • Experienced candidates with Quality Engineering, Manufacturing Engineering, Supplier Quality, or related experience are strongly encouraged to apply.\n, • Ability to read and interpret engineering drawings and technical specifications.\n, • Experience or exposure to quality methodologies such as FAI, RCCA, SPC, PPAP, APQP, 8D, or 5 Why is a plus.\n, • Knowledge of AS9100 or aerospace/defense quality requirements is highly desirable but not required\n, • Strong analytical and problem-solving skills.\n, • Proficiency with Microsoft Excel.\n, • LEAN or Six Sigma knowledge is a plus.\n, • Strong communication skills and the ability to collaborate across engineering, manufacturing, quality, and customer-facing teams.\n, • A genuine interest in quality, continuous improvement, and solving technical problems.\n, • Ability to work on site in Rochester NY.\n\n \n Direct hire with base salary commensurate with experience in the $70,000 - $100,000 range plus excellent benefits and growth opportunity. Apply to iWorld Professionals for immediate confidential consideration. \n \n iWorld Professionals is an Equal Opportunity Employer. We consider qualified applicants without regard to race, color, religion, sex, national origin, age, disability, veteran status, or other characteristics protected by applicable law.

This is a hands-on quality role for someone who likes being close to production, solving problems at the source and seeing corrective actions through to completion. \n \n An established Rochester-area manufacturer is seeking a Quality Engineer to support high-volume production. The person in this role will manage quality activities for assigned products, coordinate customer and supplier issues, maintain required documentation and help improve manufacturing performance. \n \n Responsibilities \n\n • Manage day-to-day quality activities for assigned products and manufacturing processes.\n, • Prepare and maintain production quality documents, including process flow diagrams, Control Plans, inspection instructions and product records.\n, • Coordinate customer approval packages for new products and changes, including PPAP documentation and supporting evidence.\n, • Address customer and supplier quality concerns, coordinate containment and complete root-cause and corrective-action reports within required timelines.\n, • Manage nonconforming material through review, disposition, sorting, rework and verification.\n, • Use inspection results and statistical data to evaluate process stability, capability and product conformance.\n, • Support the qualification of new or modified tooling, materials and manufacturing processes.\n, • Work with production, engineering, tooling and suppliers to resolve recurring issues, develop inspection methods, train quality personnel and support audits.\n\n \n Qualifications \n\n • Bachelor's degree in engineering, quality, manufacturing or a related field, or an equivalent combination of education and relevant experience.\n, • At least two years of quality experience in automotive, high-volume or closely related manufacturing.\n, • Experience with PPAPs, Control Plans, process flow diagrams, PFMEAs and related manufacturing quality documentation.\n, • Knowledge of SPC, MSA, gauge repeatability and reproducibility, process capability and basic statistical analysis.\n, • Experience leading 8D investigations, root-cause analysis, containment and corrective action.\n, • Ability to interpret engineering drawings and apply geometric dimensioning and tolerancing concepts in a production environment.\n, • Experience communicating with customers and suppliers and supporting tooling or process changes.\n, • IATF 16949 experience is preferred. Proficiency with Microsoft Office and experience with Minitab or similar statistical software are helpful.\n\n \n What the Position Offers \n The position offers competitive compensation based on experience, a comprehensive benefits package, a 401(k) program with company matching and the opportunity to take ownership of visible quality initiatives in an established manufacturing operation. \n \n Our client is an equal opportunity employer. Reasonable accommodations may be provided to qualified individuals who need them to perform the essential functions of the position.