Trabajos quality control technician en Buffalo, New YorkCrear alertas

Responsibilities: USRC's greatest strength in being a leader in the dialysis industry is our ability to recognize and celebrate the differences in our diverse workforce. We strongly believe in recruiting top talent and creating a diverse and inclusive work climate and culture at all levels of our organization. The Biomedical Technician is responsible for overseeing the overall operational condition, maintenance and repair of all water treatment equipment, all medical equipment and mechanical/electrical systems to ensure patient safety and the safety of all staff operating such equipment for their assigned clinic(s). ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties and tasks may be assigned. • Demonstrate effective use of supplies and staff labor hours., • Assist with purchasing as needed: place orders, perform weekly and month end inventory counts., • Be familiar with the overall procedures used in Inventory Control (FIFO) and assist in the documentation and control of excess inventory., • Perform duties as assigned to meet the patient care or operational needs of the clinic., • Troubleshoot, repair and maintain equipment as recommended by the manufacturer., • Repair, calibrate, test, clean and disinfect dialysis machines, water distribution loop and RO's according to protocol., • Perform water quality checks to include but not limited to: free chlorine, total chlorine, and water hardness testing., • Perform safety checks and tests on all pretreatment water equipment including but not limited to carbon tanks, water softeners, RO units, UV lamps and ultrafilters., • Collect samples of RO water and dialysate for microbiology testing according to protocol., • Collect water samples for AAMI analysis testing according to protocol., • Disinfection of central bicarbonate system and mixing tank according to protocol., • Disinfection of RO, distribution system, and hemodialysis machines according to protocol., • Perform duties at all times within limitations established by and in accordance with company policy and procedures, applicable state and federal laws and regulations., • Perform electrical safety on dialysis machines and related equipment., • Be familiar with instruction manuals and operation for equipment in accordance with manufacturer's recommendations. Be capable of starting up and shutting down facility's equipment if necessary., • Maintain established preventative maintenance programs and required support documentation., • Maintain accurate maintenance records for the facility's equipment., • Have knowledge of the function and safe operation of water treatment equipment and related mechanical and electrical systems., • Address physical environment issues which could impact patient and staff safety., • Mix bicarbonate solution according to protocol. Mix acid concentrate solution according to protocol., • Assist in receiving, storing and stocking of supplies., • Be familiar with all emergency equipment and emergency operational procedures., • Use appropriate safety measures including personal protective equipment as necessary., • Be familiar with OSHA regulations., • Update Material Safety Data Sheets (MSDS) as required., • Be aware of all contracts and contacts necessary for the emergency repair of the clinic's equipment and mechanical systems., • Obtain quotes from reputable and approved contractors as needed to address physical environment issues., • Present technical summaries in QAPI meetings., • Maintain collaborative working relationship with Administrator(s). Partner with Administrator(s) to ensure clinic needs are met., • Actively promote GUEST customer service standards; develop effective relationships at all levels of the organization., • Respond effectively to inquiries or concerns., • Participate in staff meetings as required. Attend in-service and continuing education offerings in compliance with company policy and procedure., • Complete initial and annual technical training on clinical staff as required., • Instruct staff in use and care of equipment and answer questions., • Participate in team concepts and promote a team effort. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Requirements include: • High school diploma or equivalent., • Valid driver' license in applicable state. License must be maintained as current, without restrictions and good driving record., • Previous dialysis, hospital, or medical experience preferred., • Confirmation of ability to distinguish all primary colors., • Ability to react and perform under stress and in emergency situations., • Ability to communicate and interface effectively with others., • Demonstrated working knowledge of the English language and ability to communicate verbally and in writing., • Ability to work independently as well as with others to plan and organize work assignment. U.S. Renal Care is an Equal Opportunity Employer/Disabled/Veteran. Benefit Details All Full-Time employees are eligible for the following benefits: • Medical / Pharmacy, • Dental, • Vision, • Voluntary benefits, • 401k with employer match, • Virtual Care, • Life Insurance, • Voluntary Benefits, • PTO All Part Time employees are eligible for the following benefits: • 401k with employer match, • PTO Pay Range: USD $23.96 - USD $35.95 /Hr. Company (Career Site Brand): U.S. Renal Care

Job Description Viridi Parente is a disruptive energy company. We deliver solutions to tomorrow?s problems today. We develop and manufacture battery pack technology for mobile and energy storage applications. We deliver customer-focused solutions, blending environmentally conscious products with a bottom-line mentality. Viridi is a fast-growing startup environment with an eye towards a sustainable future by bringing clean energy products to the market. We are looking for a Machine Operator who will be responsible for operating AND troubleshooting of automation equipment and supporting the assembly, testing, and inspection of battery modules, packs, and related energy storage components in accordance with engineering and quality standards. This role ensures safe, efficient, and high-quality production of energy storage systems that meet performance and reliability targets. The technician will work closely with engineering, quality, and maintenance teams to support continuous improvement and ensure compliance with safety and environmental regulations. Duties/Responsibilities: • Assemble and test battery modules, packs, and electrical subassemblies following standard operating procedures (SOPs), work instructions, and technical drawings., • Operate production automation equipment and provide basic troubleshooting capabilities to achieve target production rates safely and efficiently. Periodic use of other tools such as torque tools, welders, and testers is required., • Conduct in-process inspections, electrical tests, and data logging to ensure quality and traceability., • Refill systems with piece components needed for the manufacturing process (nuts, bolts, spacers, cell, casings etc...), • Support troubleshooting of equipment or process issues in collaboration with engineers and maintenance staff., • Troubleshoot, debug & resolve electrical or mechanical issues, document issues found for manufacturing/design improvements, • Follow all safety protocols, including those related to DC battery systems and robotic / automation equipment, • Participate in continuous improvement activities to enhance efficiency, quality, and safety (Lean, 5S, Kaizen)., • Assist in and maintaining workplace organization, • Assist with the commissioning and validation of new production equipment or processes., • Crosstrain across production stations and support training of new team members., • Perform other related duties as assigned Education and Experience: • Associate degree in a technical field or technical certificate in manufacturing, electronics, mechatronics, or a related field preferred with 3 years? experience, • OR Minimum of 5 years in a similar role, having performed similar duties Required Skills/Abilities: • Possess thorough knowledge of products and production processes along with statistical control procedures, design, and testing procedures, • Mechanically inclined with great problem-solving skills, • Strong computer skills required for unit commissioning, data tracking & quality tracking & updates, • Strong understanding of mechanical assembly, electrical connections, and test procedures., • Ability to read and interpret wiring diagrams, schematics, and engineering documentation., • Basic understanding of electrical safety, ESD controls, LOTO and handling of lithium-based components., • Basic knowledge of PLC, HMI, Cameras and Robots, • Proficient with hand tools and test instruments (DMM, insulation tester), • Strong problem-solving and communication skills., • Willingness to work shifts, weekends, or overtime as required., • Works well with others and independently with minimal supervision, • Organized with attention to detail, • Ability to work in a fast-paced environment Physical Requirements: • Prolonged periods of standing and walking, • Must be able to lift and carry up to 50 pounds Compensation: • $23-$28 per hour, depending on qualifications and experience

Overview: Why U.S. Renal Care U.S. Renal Care is one of the nation’s leading providers of dialysis, partnering with physicians to care for more than 37,000 people living with kidney disease across the country. We are proud to be an industry leader in CMS 4- and 5-star rated centers for patient experience and quality of care. Our commitment to patients starts with our commitment to our team members. We invest in your growth through learning and development, career advancement opportunities, and programs designed to help you build a meaningful, lasting career. It is why we have been named one of Newsweek’s America’s Greatest Workplaces year over year, reflecting a culture where team members feel valued, supported, and empowered to grow. How you will change lives As a Patient Care Technician (PCT) at U.S. Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse or Charge Nurse for patients with renal failure. Responsibilities: What you'll be doing Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient vital signs before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders. Safety & Quality. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed. You will use appropriate safety measures, including personal protective equipment. Partnership. You'll be a critical member of an interdisciplinary team providing required patient assessment and care planning activities. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings. Qualifications: What we're looking for High school graduate or equivalent Desire to work in healthcare and care for patients. Previous healthcare experience in dialysis, phlebotomy, or as a CNA is a plus. Ability to safely mix and prepare chemical solutions following strict safety protocols Ability to distinguish all primary colors. Other requirements Successful completion of USRC training program approved by the Medical Director, including demonstrated competency; this includes successful completion of USRC training course in the theory and practice of hemodialysis within 8 weeks of hire. CPR certification required within 90 days of hire or as required by the state. Patient Care Technician certification must be obtained through a state certification program or national commercially available certification program within 18 months of hire date and maintained in good standing thereafter. Specific state requirements may be applicable and required. Are you ready to make a difference? At U.S. Renal Care, we're committed to changing the lives of people living with kidney disease. This starts with a workplace where every team member feels supported, valued and is empowered to grow so that you can focus on doing meaningful work, building a lasting career, and making a positive impact on our patients and communities. Are you with US? Apply today! Benefit Details All Full-Time employees are eligible for the following benefits: • Medical / Pharmacy, • Dental, • Vision, • Voluntary benefits, • 401k with employer match, • Virtual Care, • Life Insurance, • Voluntary Benefits, • PTO All Part Time employees are eligible for the following benefits: • 401k with employer match, • PTO Pay Range: USD $18.91 - USD $28.36 /Hr. Company (Career Site Brand): U.S. Renal Care

Provide key leadership with regard to power and control systems, equipment specification and maintenance, proper operation, technician development, troubleshooting and repair to achieve or exceed reliability targets the plant. This role has responsibility for systems optimization, power distribution, IO layout, compliance, personnel safety, and is a resource in technician skill development relative to plant electrical power and process control systems Location: Buffalo, NY manufacturing plant • Primary administrator and troubleshooter for plant power and control systems and is a key member of plant technical leadership, • Provide input to develop and manage power and control standards and ensure application of the standards on all projects and upgrades, • Lead the execution of the site masterplan for power and controls systems to include understanding of the installed base, and replacement plan for obsolete equipment/technologies, • Build and maintain a sustainable system for plant Electrical & Instrumentation (E&I) technicians skill development., • Ensure technician compliance to local and national regulator codes (NFPA 70, NFPA 70e, NFPA 79 and OSHA 1910), • Responsible for validation of the MES data from PLCs. Support plant Process Engineers in conditioning PLC data to accommodate effective data analysis including application development, • Provide support in the design and implementation of machine control and process automation applications, such as: control strategies, HMI design, MES applications and KPI development, • Identify losses, and develop plans and strategies to eliminate them, in the areas of safety, quality, reliability and cost, • Own Key Elements for systems related to power and control system such as electrical safety (LOTO, Electrical PPE, Energized work permits, low voltage qualification, etc.) and Quality/CCP compliance (checkweighers, metal detectors, vision systems, ingredient flows, temperatures, etc.), • Collaborate with leadership on selection and installation of new equipment. Become the technical expert on new equipment and ensures the training of others regarding control systems, • Serve as project manager for initiatives ranging from E&I focused projects to complete capital projects, • Provide power and controls engineering support on capital initiatives, • Learn and apply control, simulation and process modeling technologies to analyze and improve overall process and packaging operations, • Compensation range: $85,500 - $123,200 annualized Minimum Requirements: • Bachelor's Degree in Electrical Engineering, • 2 years of controls or electrical engineering experience, • Understanding of machine and/or process control hardware, instrumentation and software (ex: Allen Bradley PLC, ControlLogix, Wonderware HMI, and Rockwell FactoryTalk)

Provide key leadership with regard to power and control systems, equipment specification and maintenance, proper operation, technician development, troubleshooting and repair to achieve or exceed reliability targets the plant. This role has responsibility for systems optimization, power distribution, IO layout, compliance, personnel safety, and is a resource in technician skill development relative to plant electrical power and process control systems Location: Buffalo, NY manufacturing plant • Primary administrator and troubleshooter for plant power and control systems and is a key member of plant technical leadership, • Provide input to develop and manage power and control standards and ensure application of the standards on all projects and upgrades, • Lead the execution of the site masterplan for power and controls systems to include understanding of the installed base, and replacement plan for obsolete equipment/technologies, • Build and maintain a sustainable system for plant Electrical & Instrumentation (E&I) technicians skill development., • Ensure technician compliance to local and national regulator codes (NFPA 70, NFPA 70e, NFPA 79 and OSHA 1910), • Responsible for validation of the MES data from PLCs. Support plant Process Engineers in conditioning PLC data to accommodate effective data analysis including application development, • Provide support in the design and implementation of machine control and process automation applications, such as: control strategies, HMI design, MES applications and KPI development, • Identify losses, and develop plans and strategies to eliminate them, in the areas of safety, quality, reliability and cost, • Own Key Elements for systems related to power and control system such as electrical safety (LOTO, Electrical PPE, Energized work permits, low voltage qualification, etc.) and Quality/CCP compliance (checkweighers, metal detectors, vision systems, ingredient flows, temperatures, etc.), • Collaborate with leadership on selection and installation of new equipment. Become the technical expert on new equipment and ensures the training of others regarding control systems, • Serve as project manager for initiatives ranging from E&I focused projects to complete capital projects, • Provide power and controls engineering support on capital initiatives, • Learn and apply control, simulation and process modeling technologies to analyze and improve overall process and packaging operations, • Compensation range: $85,500 - $123,200 annualized Minimum Requirements: • Bachelor's Degree in Electrical Engineering, • 2 years of controls or electrical engineering experience, • Understanding of machine and/or process control hardware, instrumentation and software (ex: Allen Bradley PLC, ControlLogix, Wonderware HMI, and Rockwell FactoryTalk)

Provide key leadership with regard to power and control systems, equipment specification and maintenance, proper operation, technician development, troubleshooting and repair to achieve or exceed reliability targets the plant. This role has responsibility for systems optimization, power distribution, IO layout, compliance, personnel safety, and is a resource in technician skill development relative to plant electrical power and process control systems Location: Buffalo, NY manufacturing plant • Primary administrator and troubleshooter for plant power and control systems and is a key member of plant technical leadership, • Provide input to develop and manage power and control standards and ensure application of the standards on all projects and upgrades, • Lead the execution of the site masterplan for power and controls systems to include understanding of the installed base, and replacement plan for obsolete equipment/technologies, • Build and maintain a sustainable system for plant Electrical & Instrumentation (E&I) technicians skill development., • Ensure technician compliance to local and national regulator codes (NFPA 70, NFPA 70e, NFPA 79 and OSHA 1910), • Responsible for validation of the MES data from PLCs. Support plant Process Engineers in conditioning PLC data to accommodate effective data analysis including application development, • Provide support in the design and implementation of machine control and process automation applications, such as: control strategies, HMI design, MES applications and KPI development, • Identify losses, and develop plans and strategies to eliminate them, in the areas of safety, quality, reliability and cost, • Own Key Elements for systems related to power and control system such as electrical safety (LOTO, Electrical PPE, Energized work permits, low voltage qualification, etc.) and Quality/CCP compliance (checkweighers, metal detectors, vision systems, ingredient flows, temperatures, etc.), • Collaborate with leadership on selection and installation of new equipment. Become the technical expert on new equipment and ensures the training of others regarding control systems, • Serve as project manager for initiatives ranging from E&I focused projects to complete capital projects, • Provide power and controls engineering support on capital initiatives, • Learn and apply control, simulation and process modeling technologies to analyze and improve overall process and packaging operations, • Compensation range: $85,500 - $123,200 annualized Minimum Requirements: • Bachelor's Degree in Electrical Engineering, • 2 years of controls or electrical engineering experience, • Understanding of machine and/or process control hardware, instrumentation and software (ex: Allen Bradley PLC, ControlLogix, Wonderware HMI, and Rockwell FactoryTalk)

Provide key leadership with regard to power and control systems, equipment specification and maintenance, proper operation, technician development, troubleshooting and repair to achieve or exceed reliability targets the plant. This role has responsibility for systems optimization, power distribution, IO layout, compliance, personnel safety, and is a resource in technician skill development relative to plant electrical power and process control systems Location: Buffalo, NY manufacturing plant • Primary administrator and troubleshooter for plant power and control systems and is a key member of plant technical leadership, • Provide input to develop and manage power and control standards and ensure application of the standards on all projects and upgrades, • Lead the execution of the site masterplan for power and controls systems to include understanding of the installed base, and replacement plan for obsolete equipment/technologies, • Build and maintain a sustainable system for plant Electrical & Instrumentation (E&I) technicians skill development., • Ensure technician compliance to local and national regulator codes (NFPA 70, NFPA 70e, NFPA 79 and OSHA 1910), • Responsible for validation of the MES data from PLCs. Support plant Process Engineers in conditioning PLC data to accommodate effective data analysis including application development, • Provide support in the design and implementation of machine control and process automation applications, such as: control strategies, HMI design, MES applications and KPI development, • Identify losses, and develop plans and strategies to eliminate them, in the areas of safety, quality, reliability and cost, • Own Key Elements for systems related to power and control system such as electrical safety (LOTO, Electrical PPE, Energized work permits, low voltage qualification, etc.) and Quality/CCP compliance (checkweighers, metal detectors, vision systems, ingredient flows, temperatures, etc.), • Collaborate with leadership on selection and installation of new equipment. Become the technical expert on new equipment and ensures the training of others regarding control systems, • Serve as project manager for initiatives ranging from E&I focused projects to complete capital projects, • Provide power and controls engineering support on capital initiatives, • Learn and apply control, simulation and process modeling technologies to analyze and improve overall process and packaging operations, • Compensation range: $85,500 - $123,200 annualized Minimum Requirements: • Bachelor's Degree in Electrical Engineering, • 2 years of controls or electrical engineering experience, • Understanding of machine and/or process control hardware, instrumentation and software (ex: Allen Bradley PLC, ControlLogix, Wonderware HMI, and Rockwell FactoryTalk)

Job Description Van Hook Service Company Inc. was founded in 1973 and currently services thousands of locations throughout New York and Pennsylvania. A great opportunity at a growing company! We have multiple positions available, we offer the highest pay scale based on experience, full benefits at no cost to the employee, large 401k contributions, overtime opportunities available, you will not find better benefits anywhere in the HVAC/R industry. A fully equipped service truck, training, cell phone, all tools and support needed to get the job done are provided by the company. Come work at a company that values its employees and provides the highest level of service to its customers through integrity, excellence, innovation and professionalism. HVAC/R Technician Job Description We are looking to hire a detail-oriented HVAC technician to install, maintain and repair HVAC/R systems. The HVAC technician will be skilled in cleaning, adjusting and repairing systems. You will guide and advise the customer to select the most appropriate air quality system to fulfill their requirements. You will be responsible for air quality systems from installation to end-of-life by performing maintenance, warranty, and emergency repairs. To be successful in this role, customer satisfaction, safety and communication should be your top priority. Ideal candidates will be patient and have excellent organizational and troubleshooting skills. HVAC Technician Responsibilities: • Installing, maintaining, and repairing ventilation and air conditioning systems and equipment., • Diagnosing electrical and mechanical faults for HVAC/R systems., • Cleaning, adjusting, and repairing systems, and performing warranty services., • Performing emergency repairs promptly and efficiently., • Keeping daily logs and records of all maintenance functions., • Complying with service standards, work instructions and customers' requirements., • Assisting with customers' queries. HVAC Technician Requirements: • High school diploma, GED or suitable equivalent., • 2+ year experience as an HVAC/R technician, and willingness to continue education in HVAC field., • Valid driver’s license., • Understanding principles of air conditioning, refrigeration, and heating., • Excellent written, verbal, and interpersonal skills., • Ability to work after hours when scheduled. Work Remotely • No Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Health insurance, • Health savings account, • Paid time off, • Parental leave, • Professional development assistance, • Referral program, • Retirement plan, • Tuition reimbursement, • Vision insurance Schedule: • 8 hour shift, • On call, • Overtime Education: • High school or equivalent (Required) Experience: • HVAC: 2 years of field experience or equivalent License/Certification: • Driver's License (Required), • EPA Certification (Preferred), • OSHA 10 (Preferred) Work Location: Multiple locations \nCompany Description Van Hook Service Co. is a leader in the commercial HVAC/R industry, known for top-tier pay, excellent benefits, and long-term career opportunities. As a third-generation, family-owned business established in 1973, we proudly serve all of New York State and Northern Pennsylvania. Our team services all types of HVAC/R equipment and control systems and has the expertise to complete a wide range of construction projects from start to finish Van Hook Service Co. is a leader in the commercial HVAC/R industry, known for top-tier pay, excellent benefits, and long-term career opportunities. As a third-generation, family-owned business established in 1973, we proudly serve all of New York State and Northern Pennsylvania. Our team services all types of HVAC/R equipment and control systems and has the expertise to complete a wide range of construction projects from start to finish

Job Description Viridi Parente is a disruptive energy company. We deliver solutions to tomorrow’s problems, today. We develop and manufacture battery pack technology for mobile and energy storage applications. We deliver customer-focused solutions, blending environmentally conscious products with a bottom-line mentality. Viridi is a fast-growing startup environment with an eye towards a sustainable future by bringing clean energy products to the market. Viridi is seeking self-motivated individuals looking to challenge themselves. The Role: We are looking for an Assembly Technician II with a genuine passion for excellence and a desire to work in a fast-paced, entrepreneurial company. The ideal candidate for this advanced position will have at least two years of experience in assembly operations and will be very mechanically inclined. An excellent candidate will be one with a strong focus on quality, with high energy and a passion for learning new skills. Job Responsibilities: • Produce components by assembling parts and subassemblies, utilizing hand tools and/or machines, both in a manual and semi-automated environment, • Position and/or align components and parts, either manually or with hoists, • Assemble components by examining connections for correct fit, fastening parts and subassemblies., • Keep equipment operational by completing preventative maintenance requirements, following manufacturer’s instructions, and calling for repairs, • Interpret technical documents and assembly instructions, such as diagrams, and/or other verbal or written instructions, • Conduct quality control checks as required to ensure correct assembly and handle defective items according to established procedures, • Document actions by completing required production and quality forms, • Participate in daily shift meetings, • Participate in continuous improvement initiatives and ongoing training, • Maintain a safe and clean working environment by complying with company procedures, rules and regulations, • Adhere to company accountability standards pertaining to attendance, safety, and workmanship, • Perform other related duties as assigned Qualifications: • At least 2 years of experience working in general manufacturing, • Strong prior mechanical knowledge, electrical knowledge a plus, • Great problem-solving skills and the ability to troubleshoot, • Ability to read and follow detailed assembly instructions, • Works well independently and with others, • Organized with strong attention to detail, • Has a strong focus on quality control and a strong safety management mindset Physical Requirements: • Ability to lift 40 pounds., • Willing to perform repetitive tasks while sitting or standing for extended periods of time in a manual assembly operation, • Dexterity and hand-eye coordination, including the ability to grasp, manipulate, and assemble parts and components that are often very small., • Must have good eyesight, including depth perception, peripheral vision, and ability to differentiate between colors. Working Conditions: • Exposure to outside elements when walking to and from buildings., • Exposure to loud noises., • Possible exposure to electrical hazards and heavy equipment. Salary: • $19.50 - $22 per hour, depending on experience and qualifications

Job Description Viridi Parente is a disruptive energy company. We deliver solutions to tomorrow?s problems, today. We develop and manufacture battery pack technology for mobile and energy storage applications. We deliver customer-focused solutions, blending environmentally conscious products with a bottom-line mentality. Viridi is a fast-growing startup environment with an eye towards a sustainable future by bringing clean energy products to the market. Viridi is seeking self-motivated individuals looking to challenge themselves. The Role: We are looking for an Assembly Technician with a genuine passion for excellence and a desire to work in a fast-paced, entrepreneurial company. The ideal candidate for this advanced position will have at least two years of experience in assembly operations and will be very mechanically inclined. An excellent candidate will be one with a strong focus on quality, with high energy and a passion for learning new skills. Job Responsibilities: • Produce components by assembling parts and subassemblies, utilizing hand tools and/or machines, both in a manual and semi-automated environment, • Position and/or align components and parts, either manually or with hoists, • Assemble components by examining connections for correct fit, fastening parts and subassemblies., • Keep equipment operational by completing preventative maintenance requirements, following manufacturer?s instructions, and calling for repairs, • Interpret technical documents and assembly instructions, such as diagrams, and/or other verbal or written instructions, • Conduct quality control checks as required to ensure correct assembly and handle defective items according to established procedures, • Document actions by completing required production and quality forms, • Participate in daily shift meetings, • Participate in continuous improvement initiatives and ongoing training, • Maintain a safe and clean working environment by complying with company procedures, rules and regulations, • Adhere to company accountability standards pertaining to attendance, safety, and workmanship, • Perform other related duties as assigned Qualifications: • Strong prior mechanical knowledge; electrical knowledge a plus, • Great problem-solving skills and the ability to troubleshoot, • Ability to read and follow detailed assembly instructions, • Works well independently and with others, • Organized with strong attention to detail, • Has a strong focus on quality control and a strong safety management mindset Physical Requirements: • Ability to lift 40 pounds., • Willing to perform repetitive tasks while sitting or standing for extended periods of time in a manual assembly operation, • Dexterity and hand-eye coordination, including the ability to grasp, manipulate, and assemble parts and components that are often very small., • Must have good eyesight, including depth perception, peripheral vision, and ability to differentiate between colors. Working Conditions: • Exposure to outside elements when walking to and from buildings., • Exposure to loud noises., • Possible exposure to electrical hazards and heavy equipment. Salary: • $18 per hour, depending on experience and qualifications

Senior Controls Engineer Buffalo, NY Compensation: $85,000 to $110,000 per year This manufacturing facility in Buffalo, NY is seeking a Senior Controls Engineer to lead power and control systems strategy across the plant. This role owns systems optimization, power distribution, IO layout, and regulatory compliance, while also serving as a technical resource for electrical and instrumentation (E&I) technician development. Compensation $85,000 to $110,000 per year. What You'll Do The Senior Controls Engineer acts as the primary administrator and troubleshooter for plant power and control systems and serves as a key member of plant technical leadership. This includes developing and managing power and control standards, ensuring their application across all projects and upgrades, and leading execution of the site masterplan for power and controls systems, including assessment of the installed base and a replacement plan for obsolete equipment and technologies. This role builds and maintains a sustainable skill development system for plant E&I technicians and ensures technician compliance with local and national regulatory codes, including NFPA 70, NFPA 70E, NFPA 79, and OSHA 1910. The Senior Controls Engineer validates MES data from PLCs and supports plant process engineers in conditioning PLC data for effective analysis and application development. This position also provides support for machine control and process automation design, including control strategies, HMI design, MES applications, and KPI development. Additional responsibilities include identifying losses across safety, quality, reliability, and cost, and developing strategies to eliminate them; owning key elements related to electrical safety (LOTO, electrical PPE, energized work permits, low voltage qualification) and quality and food safety compliance (checkweighers, metal detectors, vision systems, ingredient flows, temperatures); collaborating with leadership on new equipment selection and installation while becoming the technical expert and trainer on that equipment; serving as project manager on initiatives ranging from E&I-focused projects to full capital projects; and applying control, simulation, and process modeling technologies to improve process and packaging operations. Required Qualifications • Bachelor's degree in Electrical Engineering, • 2+ years of controls or electrical engineering experience, • Experience with PLC platforms such as Allen Bradley ControlLogix, • Experience with HMI software such as Wonderware, • Experience with Rockwell FactoryTalk software, • Working knowledge of NFPA 70, NFPA 70E, NFPA 79, and OSHA 1910 standards Preferred Qualifications • Experience in a food and beverage or regulated manufacturing environment, • Experience with MES systems or data historian applications, • Project management experience on capital projects, • Experience developing technician training programs Compensation and Benefits • $85,000 to $110,000 per year, • Medical, dental, and vision insurance, • 401k, • Paid time off To apply, please submit your resume for consideration.

Job Description GTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safety I Quality I Customer Obsession I Speed I Agility The QC Technician is responsible for the inspection and testing of materials and finished products at various stages of the manufacturing process to ensure they comply with all applicable laws, industry codes & standards, as well as Company and Customer specifications/standards. Responsibilities • Develop and maintain inspection reports, • Ensure compliance with federal and state laws, as well as company standards and specifications, • Maintain calibration of quality control equipment, • Perform inspections across all stages of production, • Prepare and maintain test data for review, • Evaluate data and draft reports, noting any relevant deviations from existing standards, • Identify areas for quality control improvement and implement new methods accordingly, • Communicate quality or compliance concerns with urgency, • Other duties as assigned by the QA ManagerRequired Qualifications, • High school diploma or general education degree (GED) required, • Solid understanding of measuring, inspection and test equipment, • Minimum of 2-5 years of inspection and/or production experience in the metals fabrication industry., • Visual weld and welding inspection experience, • Proficiency with Microsoft Office programs, specifically Excel, • Strong working knowledge of various mathematical concepts including fractions, ratios, and proportions., • Ability to lift and/or move up to 50 pounds occasionally, • Specific vision abilities required include close vision, color vision, and the ability to adjust focus. (minimum required visual acuity - 20/20 corrected or uncorrected), • Demonstrated ability to work independently with minimal supervision, • Excellent organizational skills, • Demonstrated ability to analyze and interpret information, • Ability to read and interpret mechanical, electrical, and fabrication drawingsPreferred Qualifications, • Associate or bachelor’s Degree in a related fieldShift Monday - Friday : 3:30pm - 12am Perks & Benefits GTI Energy offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. #ZR GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy Policy Terms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us. \nCompany Description GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more. GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job Description TRUCK FLEET MANAGEMENT POSITIONS: An outstanding, full-time opening has become available in the Buffalo, NY area for an individual with 3+ years’ experience as a Parts Manager with a background preferably in a commercial heavy – duty truck dealership and service center. This position would earn a generous base salary and a loaded benefits package including medical benefits, a 401K w/ matching, Short/Long Term Disability, Life insurance, PTO and other outstanding perks. All candidates MUST have the following experiences to qualify for consideration: Parts Manager: · Leading all aspects of the Parts Department, ensuring compliance with DTNA requirements, AORA standards, vendor agreements, and Elite Dealer processes is PREFERRED · Driving parts sales growth, profitability, inventory control, and customer support initiatives through effective operational management and strategic business development is PREFERRED · Collaborating with dealership leadership to optimize departmental performance, enhance customer satisfaction, and support overall dealership objectives is PREFERRED · Leveraging CDK training, user groups, and industry best practices to drive continuous process improvement, operational efficiency, and dealership performance is PREFERRED · Utilizing CDK reporting and analytics to monitor departmental performance, ensure process consistency, and identify opportunities for improvement and growth is PREFERRED · Leading all Parts Department personnel functions, including staffing, scheduling, recruitment, training, performance management, policy compliance, and team development, while ensuring productivity, operational efficiency, and exceptional customer support is PREFERRED Salary range: $88K - $115K ---------------------- Service Manager: An outstanding, full-time opening has become available in the Buffalo, NY area for an individual with 4+ years’ experience as a Service Manager with a background in a commercial heavy – duty truck dealership and service center. This position would earn a generous base salary and a loaded benefits package including medical benefits, a 401K w/ matching, Short/Long Term Disability, Life insurance, PTO and other outstanding perks. All candidates MUST have the following experiences to qualify for consideration · Valid NYS CDL Class B and NYS Inspector License (Light, Medium, and Heavy Duty) is REQUIRED · Relevant technical education and/or experience in diesel, truck, or heavy-duty vehicle service and repair is REQUIRED · Ability to complete and maintain required OEM and Elite Dealer certifications and training is REQUIRED · Lead and manage all aspects of service department operations, technician productivity, and workflow is PREFERRED · Provide exceptional customer service through repair coordination, communication, and issue resolution is PREFERRED · Ensure compliance with OEM, warranty, safety, and dealership standards while maintaining repair quality and operational efficiency is PREFERRED Salary range: $90K - $115K If interested and QUALIFIED, please send resume in Microsoft Word format to: anthony@etechhi.com Etech Hi, Inc. is an equal opportunity employer/staffing firm and we are committed to providing a workplace free from harassment and discrimination. We celebrate the unique differences of our employees and candidates because that is what drives curiosity, innovation, and the success of our business. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, gender identity or expression, age, marital status, veteran status, disability status, pregnancy, parental status, genetic information, political affiliation, or any other status protected by the laws or regulations in the locations where we operate. #ZR

Job Description Job Summary: To perform inspection, preventative maintenance, repair of medical equipment at customer facilities. Remote, work from home base, traveling to customer sites to provide service. Occasional travel to Corporate Office in Rochester, NY. To become a specialist in service of Sterilizers/Autoclaves at customer facilities. MAJOR DUTIES AND RESPONSIBILITIES: • Administrative:, • Reads and interprets medical equipment operation and maintenance manuals, schematics, and mechanical drawings. Use of all available resources., • Must be able to travel as necessary to perform the technical tasks below., • Technical, • Operates test equipment, such as, safety analyzers, ESU analyzers, defibrillator analyzers, and physiological input simulators., • Uses common hand tools as required in the performance of job tasks., • Troubleshoots and repairs: Electro-mechanical equipment, hydraulic, steam, electrical, and microprocessor based systems., • Inspects, troubleshoots, and repairs a wide variety of electronic and electro-mechanical medical equipment including but not limited to physiologic monitors, infusion devices, defibrillators, ESUs, and general patient care devices, endoscope washers, and sterilizers., • Performs spot and routine safety and performance checks., • Identify parts needed for repairs of medical devices using service manuals and technical support., • Provide quality customer service to customers in the region in field service., • Customer Service, • Must be able to diligently communicate with customers regarding equipment status., • Must clearly, and professionally document all service practices for customer reporting. SKILLS AND ABILITIES: The following performance expectations represent core competency requirements for the position of Equipment Technician. • Maintains knowledge of the clinical purpose, proper operating procedures, maintenance requirements, and risks associated with use, of medical devices for which the technician has maintenance responsibilities., • Troubleshoots equipment problems to component level., • Demonstrates proper and effective use of test equipment, input simulators, and hand tools., • Interprets schematic drawings and performs basic circuit analysis., • Demonstrates effective equipment assembly/disassembly, and component replacement skills., • Interacts in a professional manner with all client staff, patients, and co-workers., • Maintains knowledge of, and compliance with Mantis Medical Equipment Service reporting policies and procedures., • Maintains knowledge of, and compliance with corporate, and client mandated policies regarding workplace safety issues (infection control, fire safety, hazard communications, etc.)., • Must be able to work with limited supervision at customer locations with professionality, customer service, and integrity. EDUCATION AND/OR EXPERIENCE: • Must be experienced in troubleshooting, repairing and maintaining electro-mechanical systems. (HVAC, Residential or Commercial considered.), • Educational background should include the completion of a two-year associate degree program in Technology/Engineering curriculum, or military/ non-military equivalent. Recommended., • Must be able to troubleshoot and repair complex electronic, steam, and/or hydraulic devices utilizing resources available., • Must work with a minimum of supervision., • Must be able to read and write English and communicate effectively with hospital staff, vendors, manufacturers, and corporate staff., • Must have a reliable means of transportation and a valid driver's license. Mandatory., • Preferred experience in sterilization and other electromechanical service, pneumatics, steam systems, boilers... WORKING CONDITIONS/PHYSICAL DEMANDS: • Must be able to access and work in confined spaces with little or no assistance., • Must be able to lift a minimum of 50 lbs. to chest height unassisted and 60 lbs. assisted., • Must be willing and able to work with potentially harmful/irritating chemicals using safety guidelines., • Must be able to travel to customer sites within the region., • Some overnight travel may be applicable for training purposes or customer site visits., • Must be able to attend training schools and seminars. Benefits Our benefits package is designed to attract, retain, and motivate high caliber professionals in support of the mission and goals of Mantis Medical Equipment Service. We offer a full array of benefits that add value to your compensation package and protect you and your family. This includes medical insurance, paid holidays, and paid time off, which provide for personal well-being. In addition, we offer a 401K with a generous company match. Fuel and Car Allowances are provided. Entry level technicians will be considered. Training provided. \nCompany Description Mantis Medical Compliance Group is a fast growing biomedical engineering firm that has made investments in to growth and quality for the future. From medical device sales and repair, to maintenance programs, environmental monitoring and compliance consulting, Mantis brings over three decades of proven solutions and trusted expertise. Our team of certified and OEM-trained staff brings over 30 years of experience to exceed the needs of each client we serve. Mantis Medical Compliance Group is a fast growing biomedical engineering firm that has made investments in to growth and quality for the future. From medical device sales and repair, to maintenance programs, environmental monitoring and compliance consulting, Mantis brings over three decades of proven solutions and trusted expertise. Our team of certified and OEM-trained staff brings over 30 years of experience to exceed the needs of each client we serve.

Job Description We are looking for an experienced Manager to join our team! A Sales Manager takes on many different roles as they manage the day-to-day operations including: generating sales, communicating with customers, building client relationships and managing the technical team. Position Responsibilities: • Perform a high volume of warm calls to potential customers (must have excellent phone sales and the ability to complete a one-call close), • Engage and consult incoming customers, both in-person and over the phone, to successfully generate and close sales, • Meet, greet and recommend services to customers, • Manage technician workflow and the status of the customers vehicles’ repairs, • Order parts and inventory, • Deliver a high level of customer service and quality control over all aspect of the center's business, operations, and work product What We Offer: • Competitive compensation packages and incentive programs, • Ongoing training and field support, • Daytime work hours, • Growth opportunity Job Requirements: • Minimum of 2 years of sales experience, • Excellent closing skills, • Strong commitment to customer service and relationship building, • Ability to communicate and use interpersonal skills at a sustained high level, • Capable of multi-tasking and executing in a fast-paced environment, • Coachable, honest and goal-oriented team player, • Must have valid driver's license If you are interested in this position, please apply through this site or contact Christian Harless at charless@aamco.com. Powered by JazzHR CBFAK4Jbir

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. The Junior Controls Technician assists in the installation, maintenance, troubleshooting, and repair of industrial control systems, automation equipment, PLCs, HMIs, sensors, and related electrical systems. This role works under the guidance of senior technicians and engineers to support production equipment reliability, operational efficiency, and safety compliance. Key Responsibilities • Assist with troubleshooting electrical and control system issues on manufacturing equipment., • Support installation, testing, and commissioning of PLC-controlled equipment and automation systems., • Perform preventive and predictive maintenance on control panels, sensors, drives, motors, and instrumentation., • Read/interpret/revise electrical schematics, wiring diagrams, and technical manuals., • Maintain and update control system documentation and maintenance records., • Assist with programming modifications to PLCs, HMIs, and VFDs under supervision., • Install and terminate wiring for control panels and field devices., • Calibrate sensors, transmitters, and instrumentation equipment., • Support continuous improvement and automation projects., • Follow all plant safety procedures, lockout/tagout (LOTO) requirements, and electrical safety standards., • Coordinate with production, maintenance, and engineering teams to minimize downtime., • Maintain inventory of spare parts and control system components. Required Qualifications • Associate degree or technical certification in Electrical Technology, Automation, Mechatronics, Industrial Controls, or related field., • Basic understanding of electrical systems, PLCs, HMIs, and industrial automation., • Ability to read electrical prints and schematics., • Familiarity with troubleshooting electrical circuits using multimeters and testing equipment., • Strong mechanical aptitude and problem-solving skills., • Proficiency with Microsoft Office applications., • Ability to work independently and as part of a team. Preferred Qualifications • Experience with Allen-Bradley, Siemens, Mitsubishi, or Schneider control systems., • Exposure to Variable Frequency Drives (VFDs) and servo systems., • Knowledge of industrial networks such as Ethernet/IP, Profinet, or Modbus., • Internship, co-op, or maintenance experience in a manufacturing environment., • Basic PLC programming experience. Physical Requirements • Ability to stand, walk, climb ladders, and work in industrial environments., • Ability to lift up to 50 pounds., • Ability to work around moving machinery and electrical equipment while using appropriate PPE. Key Skills • Electrical troubleshooting, • PLC fundamentals, • Automation systems, • Technical documentation, • Preventive maintenance, • Communication and teamwork, • Attention to detail, • Safety awareness, • Continuous improvement mindset Pay: $27.00-$32.00 per hour* *The hourly rate as indicated in the CBA. The posted pay rate reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Sign-On Bonus up to $2,000 Zehnder Rittling in South Buffalo is hiring a skilled and detail-oriented Powder Coat Paint Line Technician to join our team.This position involves managing and maintaining the powder coating process and equipment, ensuring high-quality finishes on a variety of products. The technician will operate and troubleshoot equipment, mix and apply powder coating materials, and ensure all safety and quality standards are adhered to during production.Reliable transportation is required for • Monday through Thursday 5:00 am to 3:30 pm shift, • Friday OT when needed 5:00 am to 3:30 pm shift, • Saturday OT when needed 5:00 am to 11:00 am shift Strong organizational skills, attention to detail, and the ability to work effectively in a fast-paced environment are essential for success in this role. • Powder Coating Process: Operate and monitor the powder coating line to ensure the coating process meets specifications, including temperature, time, and coating thickness., • Spray Application: Apply powder coating materials to various substrates using electrostatic guns, ensuring even coverage and consistent application., • Quality Control: Inspect coated parts for defects, ensuring that the finish is uniform, smooth, and free from defects such as runs, sags, or inconsistencies., • Troubleshooting and Maintenance: Perform routine maintenance and troubleshooting of the powder coating equipment, including the booth, spray guns, wash tanks, ovens, and conveyors., • Wash System: Maintain proper pH and chemical composition of wash/rinse tanks., • Environmental and Safety Compliance: Adhere to all company safety protocols and environmental regulations. Ensure proper handling and disposal of hazardous materials., • Inventory Management: Monitor and manage inventory of powder coating materials, including pigments, chemicals, and other consumables., • Documentation: Maintain accurate production records, including batch numbers, production time, and any issues encountered during the coating process., • Continuous Improvement: Suggest and implement improvements to increase efficiency, reduce waste, and enhance product quality. Qualifications: • Experience: Previous experience in powder coating, spray painting, or a similar manufacturing environment is preferred., • Skills:, • Knowledge of powder coating materials, processes, and equipment., • Ability to use hand tools and equipment safely and effectively., • Strong attention to detail and ability to inspect and maintain quality standards., • Ability to troubleshoot and resolve technical issues with coating systems., • Physical Requirements: Ability to lift up to 50 pounds, stand for long periods, and work in an environment with exposure to heat, dust, and noise., • Education: High school diploma or equivalent. Technical certifications or training in industrial painting or related fields is a plus. Join our team as a contracted staff member to transfer into an Industrial Powder- Coat Painter employee all while contributing your skills to create exceptional finishes that meet our high-quality standards! Zehnder Rittling 100 Rittling Blvd, Buffalo, NY 14206 www.Zehnder-Rittling.com/careers Job Types: Full-time, Direct Hire or Temp-to-hire Pay: $19.00 - $25.50 per hour Expected hours: No less than 40 per week Zehnder Rittling Employee Benefits: • 401(k) & 401(k) match, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance, • Discretionary Incentive Bonus Schedule: • 10-hour shifts, • Day shift, • Monday through Thursday, • Friday (10 hours) and Saturday (6 hours) possible Overtime Experience: • Powder Coat Painting: 1 year (Required) Ability to Commute: Buffalo, NY 14220 (Required) Apply today at www.zehnder-rittling.com Work Location: In person

Job DescriptionX-Ray Technician / Radiologic Technologist Location: New York, NY Duration: 9 weeks Schedule: Monday–Friday, 8:00 AM–4:00 PM Job Summary We are seeking an experienced X-Ray Technician / Radiologic Technologist to operate radiologic imaging equipment and produce diagnostic images of the body. The technologist will prepare patients for radiological procedures, ensure image quality, and follow radiation safety protocols to protect patients and staff. The ideal candidate will have strong technical skills, excellent communication abilities, and a commitment to patient care and safety. Key Responsibilities Establish rapport with patients and healthcare staff to understand patient needs and provide a positive experience. Explain radiological procedures, answer patient questions, and help reduce anxiety. Prepare patients for imaging procedures by positioning them correctly and using immobilization devices as needed. Adjust equipment settings and exposure factors to obtain diagnostic-quality images. Follow radiation protection practices, including beam restriction, patient shielding, and appropriate exposure techniques. Maintain compliance with infection control policies and procedures. Produce high-quality radiographs in accordance with established standards and protocols. Review images, assess image quality, and make necessary adjustments. Document patient care, complete examinations, and maintain accurate patient and departmental records. Perform preventive maintenance and troubleshoot radiology equipment issues. Coordinate equipment repairs and maintain equipment inventories. Monitor radiology supplies and ensure adequate inventory levels. Maintain a clean and safe working environment in compliance with applicable regulations. Maintain professional and technical knowledge through continuing education and professional development. Complete annual Age-Specific Competency requirements. Collaborate with the healthcare team and perform other related duties as assigned. Required Qualifications Minimum of 2 years of experience as an X-Ray Technician or Radiologic Technologist. Valid New York State Department of Health license as a Licensed Radiologic Technologist (LRT). Current American Registry of Radiologic Technologists (ARRT) certification. Competency in performing diagnostic radiologic procedures. Strong knowledge of radiation safety and patient protection techniques. Excellent communication and interpersonal skills. Ability to work effectively in a team-oriented environment. Strong planning, organizational, and problem-solving skills. Dependability, attention to detail, and commitment to quality patient care. Education Graduate of a JRCERT-approved school of Radiologic Technology. Graduation from an AMA-approved school of Radiologic Technology, as specified by the position requirements. Required Certifications & Licensure New York State Licensed Radiologic Technologist (LRT). American Registry of Radiologic Technologists (ARRT) certification.

Job DescriptionBFS Fleet Service is looking for an experienced Heavy-Duty Truck Technician to join our growing team. We are not a small general repair shop trying to get into heavy-duty work. BFS is a 30,000-square-foot fleet repair facility with 36 service bays, 26 lifts, specialized equipment, experienced support staff, and a strong base of commercial fleet partners. Our heavy-duty department works on a wide range of equipment, including medium- and heavy-duty trucks, trailers, diesel-powered vehicles, vocational equipment, hydraulic systems, cranes, and specialized fleet vehicles. We are looking for someone who takes pride in diagnosing vehicles correctly, completing quality repairs, and being part of a team that keeps our partners’ fleets on the road. What You Will Do: • Diagnose and repair medium- and heavy-duty trucks., • Perform preventive maintenance and DOT inspections., • Repair air brake, suspension, steering, electrical, cooling, and aftertreatment systems., • Diagnose drivability, engine, and emissions-related concerns., • Complete repairs accurately and efficiently., • Perform thorough digital vehicle inspections., • Document findings, repairs, and recommendations clearly., • Communicate with the shop foreman and service advisors., • Follow BFS safety and quality-control procedures., • Help identify additional safety and maintenance needs while the vehicle is in our shop. The Right Person for BFS:The right technician does more than replace parts. We are looking for someone who can inspect, diagnose, communicate, and complete repairs they are proud to stand behind. You may be a strong fit if you: • Have hands-on experience repairing medium or heavy-duty trucks., • Understand diesel, electrical, air brake, steering, and suspension systems., • Can diagnose problems instead of relying on guesswork., • Take pride in doing the job correctly the first time., • Work well with foremen, advisors, and other technicians., • Keep your work area clean, safe, and organized., • Can document your findings and repairs clearly., • Are dependable and take attendance seriously., • Want to continue learning and improving your skills., • Are looking for a stable, long-term opportunity. A valid driver’s license is required. A CDL and applicable certifications are preferred but not required for the right candidate. Why Technicians Choose BFS: • Monday - Friday schedule with no weekends., • Steady, year-round commercial fleet work., • Large, well-equipped facility., • 36 service bays and 26 lifts., • Paid technical training., • Monthly hands-on training with an experienced outside instructor., • Additional in-depth training throughout the year., • Daily Today’s Class technical training., • Opportunities to work on specialized fleet equipment., • Experienced shop foremen and service advisors., • Established company with more than 40 years in the repair business., • A growing operation with room for career advancement., • Health insurance., • Paid time off and holiday pay., • Retirement plan available., • Fuel card, boot allowance, uniform. About BFS Fleet Service:BFS Fleet Service is one of Western New York’s largest independent fleet repair facilities. We support commercial fleets throughout the Buffalo area with light, medium, and heavy-duty repair, preventive maintenance, DOT inspections, hydraulics, cranes, welding and fabrication, mobile service, accessibility equipment, RV chassis service, and other specialized capabilities. We have continued to invest in our facility, equipment, training, and people because we believe technicians deserve the tools and support necessary to do their best work. BFS Fleet Service has also been nominated for the Buffalo Business Ethics Award for two consecutive years. If you are an experienced heavy-duty technician looking for steady work, continued training, and a company where quality matters, we would like to speak with you. Apply today through Betterteam. All inquiries will be kept confidential.BFS Fleet Service is an equal opportunity employer.

Job Description Job Summary: The Controls Technician ensures the reliability and efficiency of production processes by installing, maintaining, troubleshooting, and repairing electrical and automation systems. This role also involves minor design, programming, and maintenance of PLC systems, including Allen Bradley. The position includes diagnosing equipment issues, making necessary repairs, and upholding high technical standards, safety, and quality. Must have holiday and weekend availability. Must also be available to work all shifts (1st,2nd,3rd). Key Responsibilities: • Perform routine inspections, preventive maintenance, and repairs on electrical and control systems to minimize downtime and ensure optimal performance., • Develop, modify, and troubleshoot Programmable Logic Controller (PLC) programs to control production equipment and processes., • Create and update Human-Machine Interface (HMI) screens for operator interaction and process monitoring., • Calibrate and maintain sensors, transmitters, and other instrumentation devices used in production processes., • Install, troubleshoot, and repair electrical wiring, circuits, and components in accordance with safety standards., • Collaborate with engineers and production teams to identify opportunities for process improvement and automation., • Maintain accurate records of maintenance activities, equipment manuals, and electrical drawings., • Ensure that all work is performed in compliance with relevant safety, environmental, and regulatory standards., • Provide training and guidance to production personnel on the safe operation and basic troubleshooting of control systems., • Installs, troubleshoots, repairs the following systems: PLC’s, HMI’s, VFD Drives, Vision Systems, Motor Control Centers, Power Distribution Centers, Motors (DC, AC, Stepper, Servo, etc.), Three Phase/Single Phase - power and control circuits, Control Panel layout and component installation., • First responder to troubleshooting activities, leading, and assigning crew members and utilizing all available resources to correct controls issues and/or equipment/system breakdowns in an expedient manner., • Works with Maintenance Mechanics on shift to trouble shoot root cause of problems and puts preventative controls in place to mitigate further issue., • Collaborate with all business partners to maintain an ongoing, uninterrupted operation to produce high quality products, while maintaining the department in an acceptable manner., • Proactively evaluate obsolete equipment within the plant making recommendations for repair and/or replacement., • Other duties as assigned. Experience & Education Required: • Associates degree with 3-5 years of experience or equivalent combination of education and experience., • Technical degree or certification in electrical or controls-related field preferred., • Proficiency in PLC programming (e.g., Allen-Bradley, Siemens) and HMI development., • Strong knowledge of electrical systems, industrial controls, and instrumentation., • Familiarity with food safety regulations (e.g., HACCP, GMP) is a plus., • Excellent problem-solving and troubleshooting skills., • Commitment to safety and adherence to safety protocols., • Flexibility to work off-hours and weekends when necessary for maintenance and emergencies. Knowledge & Skills - Required • Proficient in troubleshooting PLC-based control systems; preferably Rockwell Software., • Competence in digital and analog temperature, pressure, flow, speed, and weight measurement., • Familiarity with discrete sensors., • Skilled in process loop calibration and equipment., • Proficient in configuring industrial control networks like Ethernet, Device Net, and DH+., • Experienced in working with 480V 3-phase power distribution., • Capable of working with Allen Bradley motor controls and VFDs., • Proficient in using electrical test equipment., • Prior manufacturing experience with PLCs and automation controls., • Possesses a working knowledge of electrical schematics, power distribution and controls, motor and motor controls, PLC logic controls, HMIs, and other industrial controls., • Must be a minimum of 18 years of age. Preferred • Dairy and/or food processing expertise, particularly in Mixing & Blending, Retort operations, automatic packaging, system and equipment mechanics, and sanitation and safety., • Proficiency in setting IP addresses using BOOTP and familiarity with software programs such as RSLogix 5, RSLogix 500, RSLogix 5000, Factory Talk for programming PLCs, HMIs, and Drive. Experience with WonderWare is a bonus. Confidentiality • The Controls Technician is exposed to and entrusted confidential information relative to production methods, customers and company strategy. Management Responsibility • The Controls Technician is an individual contributor role that operates under the general direction of the Maintenance Manager. Work Environment • While performing the duties of this job, the employee frequently works near moving mechanical parts, high speed and processing equipment; is occasionally exposed to wet and/or humid conditions and toxic or caustic chemicals; is frequently exposed to moderate to high noise levels in the work environment., • Must be able to see, grasp hold, walk, climb, bend, and stretch, lift up to 40 lbs., • Will spend significant time in the production environment where temperatures fluctuate, floors may be wet, and noise is a constant factor. Pay: $30-$45/hr.* *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Sign-On Bonus up to $2,000 Zehnder Rittling in South Buffalo is hiring a skilled and detail-oriented Powder Coat Paint Line Technician to join our team.This position involves managing and maintaining the powder coating process and equipment, ensuring high-quality finishes on a variety of products. The technician will operate and troubleshoot equipment, mix and apply powder coating materials, and ensure all safety and quality standards are adhered to during production.Reliable transportation is required for • Monday through Thursday 5:00 am to 3:30 pm shift, • Friday OT when needed 5:00 am to 3:30 pm shift, • Saturday OT when needed 5:00 am to 11:00 am shift Strong organizational skills, attention to detail, and the ability to work effectively in a fast-paced environment are essential for success in this role. • Powder Coating Process: Operate and monitor the powder coating line to ensure the coating process meets specifications, including temperature, time, and coating thickness., • Spray Application: Apply powder coating materials to various substrates using electrostatic guns, ensuring even coverage and consistent application., • Quality Control: Inspect coated parts for defects, ensuring that the finish is uniform, smooth, and free from defects such as runs, sags, or inconsistencies., • Troubleshooting and Maintenance: Perform routine maintenance and troubleshooting of the powder coating equipment, including the booth, spray guns, wash tanks, ovens, and conveyors., • Wash System: Maintain proper pH and chemical composition of wash/rinse tanks., • Environmental and Safety Compliance: Adhere to all company safety protocols and environmental regulations. Ensure proper handling and disposal of hazardous materials., • Inventory Management: Monitor and manage inventory of powder coating materials, including pigments, chemicals, and other consumables., • Documentation: Maintain accurate production records, including batch numbers, production time, and any issues encountered during the coating process., • Continuous Improvement: Suggest and implement improvements to increase efficiency, reduce waste, and enhance product quality. Qualifications: • Experience: Previous experience in powder coating, spray painting, or a similar manufacturing environment is preferred., • Skills:, • Knowledge of powder coating materials, processes, and equipment., • Ability to use hand tools and equipment safely and effectively., • Strong attention to detail and ability to inspect and maintain quality standards., • Ability to troubleshoot and resolve technical issues with coating systems., • Physical Requirements: Ability to lift up to 50 pounds, stand for long periods, and work in an environment with exposure to heat, dust, and noise., • Education: High school diploma or equivalent. Technical certifications or training in industrial painting or related fields is a plus. Join our team as a contracted staff member to transfer into an Industrial Powder- Coat Painter employee all while contributing your skills to create exceptional finishes that meet our high-quality standards! Zehnder Rittling 100 Rittling Blvd, Buffalo, NY 14206 www.Zehnder-Rittling.com/careers Job Types: Full-time, Direct Hire or Temp-to-hire Pay: $19.00 - $25.50 per hour Expected hours: No less than 40 per week Zehnder Rittling Employee Benefits: • 401(k) & 401(k) match, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance, • Discretionary Incentive Bonus Schedule: • 10-hour shifts, • Day shift, • Monday through Thursday, • Friday (10 hours) and Saturday (6 hours) possible Overtime Experience: • Powder Coat Painting: 1 year (Required) Ability to Commute: Buffalo, NY 14220 (Required) Apply today at www.zehnder-rittling.com Work Location: In person

Job Description Floor Technician Rate: $16- $19/hour (depending on experience) Shift: Full-Time Schedule: Monday-Friday, 4 am - 12 pm Harris Hill Nursing Facility is looking to add a Floor Technician to its team. In this role, you’ll help maintain a clean and safe, floor for residents, visitors, and staff throughout the facility. If you take pride in your work and enjoy making a positive impact behind the scenes, this could be the perfect opportunity for you. Located in the heart of Williamsville, Harris Hill Nursing Facility is proud to be part of The McGuire Group, a leader in skilled nursing and rehabilitation services throughout New York State. As a CMS 5-Star rated facility, Harris Hill is recognized for its commitment to quality care and clinical excellence. Our team is known for its collaborative culture, strong resident relationships, and dedication to helping both residents and employees thrive. RESPONSIBILITIES: • Clean floors to maintain a safe and sanitary environment, • Vacuum hallways, mop floors, and perform routine housekeeping tasks as directed, • Report maintenance concerns, safety hazards, and repair needs to the appropriate supervisor, • Follow infection control, HIPAA, safety, and facility policies and procedures, • Participate in quality improvement initiatives and attend required meetings and trainings, • Perform additional duties as assigned REQUIREMENTS: • Minimum education requirement: High School Diploma or equivalent, • Minimum experience requirement: No experience required; 6 months of housekeeping or laundry experience preferred, • Strong attention to detail and organizational skills, • Ability to work independently and as part of a team, • Strong communication and customer service skills, • Ability to maintain a clean, safe, and professional environment, • Dependable, positive, and committed to quality service BENEFITS: • Paid Time Off (PTO) for Full-Time and Part-Time, • Weekly or Same-Day Pay Options, • Health, Dental, and Vision Insurance, • Life Insurance, • Employee Referral Bonus Program, • Retirement Saving Options

Inc (NESL) is looking for a Concrete Quality Control Technician to support our Buffalo Ready-Mixed Concrete operations. This position will be responsible for ensuring the quality and consistency of our concrete products. Monitor concrete production and aggregate stockpiles to ensure adherence to qua

Buffalo, NY Starting pay is $19.22 per hour The Supply Service Technician (SST) is responsible for ensuring that all ambulances are'response ready' for field crews coming in for their shift assignment, with the goal of reducing down time and increasing the quality and delivery of our services to the crews and our patients. The delivered product is a clean vehicle inside and out with well stocked shelves and functioning equipment. It is important that the product produced is maintained to the highest standard. • Vehicle inventory check/control of supplies and equipment., • Clean ambulances and other field vehicles inside and outside daily., • Restock ambulance supplies daily., • Ensure deep cycling of monitor batteries as required., • Check and top off oil and window washer fluid daily., • Ensure the workspace is clean and organized., • Requisition supplies for replacement., • Inform Supervisor and Fleet Maintenance of breakdowns and cause of equipment failure for repair/reallocate ambulance to crew and keep accurate log., • Document condition of ambulance at EOS and schedule preparedness for shift personnel., • Update 'crew in service' formation on computer for equipment tracking., • Respond to daily phone inquiries from crews to help facilitate coordination between departments., • Conduct self in a professional manner in accordance with the Company's 'Standards of Conduct' policy., • Arrive for duty appropriately groomed and in the proper work dress/uniform., • Complete all required/assigned Company training., • Adhere to and comply with all Company and information security systems policies and procedures., • Perform other duties as assigned. Experience: Some experience in the industry preferred Education: High School Diploma or equivalent Skills: Basic knowledge of Microsoft Office, ability to work under time constraints, effective oral, written, and interpersonal communication skills. Credentials/Licenses: Valid State Driver's License AMR is one of Global Medical Response's (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at www.AtaMomentsNotice.com. keep care at the center, raise your hand, seek to understand, find a way together and be accountableunite our teams and set us apart in emergency medical services. Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability.

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. Maintenance Mechanic installs, maintains, and repairs machinery, equipment, physical structures, pipes, electrical and hydraulic systems by performing the following duties. Must be available for all shifts (1st, 2nd & 3rd). Must also be available on weekends and holidays. Sign-on Bonus: $10,000 ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Listens for unusual sound from machines or equipment to detect malfunction and discuss machine operation variations with operators, supervisors or other maintenance workers to diagnose problem and repair machine., • Shuts down machine or equipment and "Locks Out" all energy sources after starting repairs. Installs new or repaired parts. Tests to ensure proper operation., • Cleans and lubricates shafts, bearings, gears, and other parts of machinery according to company procedures or schedules., • Installs and repairs electrical wiring and electrical and/or electronic components on machinery and equipment., • Lays out, assembles, installs, repairs and maintains pipe systems and related hydraulic and pneumatic equipment, repairs and replaces gauges, valves, pressure regulators, and related equipment., • Repairs and maintains physical condition of facility. e.g.: May have to fabricate and/or repair counters, benches, walls, partitions, and other structures as deemed necessary., • Installs, programs and repairs automated machinery and equipment such as, programmable controllers, pumps, separators, homogenizers, packaging machines, compressors, refrigeration systems and other equipment as needed and trained to repair., • Sets up and operates machine tools such as lathe, grinder, drill, to repair or fabricate machine parts, jigs, fixtures and tools., • Operates cutting torch or welding equipment to cut or join metal parts. QUALIFICATION REQUIREMENTS: • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required., • Ability to read and interpret work orders, safety rules, operating and maintenance instructions and procedure manuals. Ability to fill out routine reports and correspondence. Ability to speak effectively and convey information to other employees., • Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. EDUCATION and/or EXPERIENCE: • High school diploma or general education degree (GED) or one to three years related experience and/or training or equivalent combination of education and experience. Must be a minimum of 18 years of age. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • While performing the duties of this job the employee is regularly required to walk, stand, use hands to finger, handle, or feel objects, tools, or controls, reach with hands and arms above shoulder height, climb or balance, stoop, kneel, crouch, talk and hear and taste and smell. The employee is occasionally required to sit., • The employee may have to get on top of machinery as well as crawling under machinery., • The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 55 pounds, and occasionally lift and/or move up to 100 pounds. With other mechanics may have to occasionally lift parts in excess of 100 pounds., • Specific vision abilities required by this job include close, distance, color and peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job., • While performing the duties of this job the employee regularly works near moving mechanical equipment. The employee often works in high, precarious places and in outside weather conditions. Is occasionally exposed to fumes or airborne particles and cleaning chemicals. Personal protective Equipment (PPE) must be worn per company policies., • The noise level in the work environment is usually moderate. Hearing protection may be required with some jobs. EARNING POTENTIAL & CERTIFICATION INCENTIVES: Base pay starting at $28.53–$31.53/hr., with total potential earnings up to $42.53/hr. Earn more as you grow: Up to $11/hour in skill-based incentives for qualifying certifications and licenses. Employees may increase their hourly rate by holding, earning, or maintaining the following certifications and licenses: Certification for Ammonia Refrigeration License for Boiler, First Class or Higher License for Industrial Electrical Certification for PLC Programming Operation and Trouble Shooting HTST Respirator Instrumentation and Control Technician Upstate Niagara Cooperative supports ongoing training and certification development to help employees grow their skills and maximize their earning potential. *The hourly rate as indicated in the CBA. The posted pay rate reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Pace Labs in the United States is seeking a Client Services Technician to join the bottle prep department within our logistics network.This role focuses on accurate order processing, packaging, glassware handling, and ensuring quality control in a fast-paced lab setting.You will receive training to

Carries out regular updates to appropriate Quality Control and Quality Assurance test databases and spreadsheets and provide report summaries or analyses as needed. We're seeking a Quality Control Technician who's ready to put your skills to work on projects that matter - and build a career with a c

Job Description We are currently looking to add a Hyperbaric Technician to our Center in Buffalo, NY. The HBO Tech plays a critical role in delivering safe, effective, and compliant hyperbaric oxygen therapy as part of AVA-RegenQuest’s wound care & vascular programs. This position ensures high-quality patient care, proper chamber operation, and strict adherence to regulatory and clinical standards while supporting the American Vascular mission of helping practices grow and improve patient outcomes across the nation. This is a full time position with an hourly comp range of $25 to $33 depending on education, certification and skills fit. We offer full med/dent/vision benefits, 401k w/matching a PTO program. There are no weekend, late night or holiday shifts. If you feel you are a match for the certification, skills and experience below, apply today! Key Responsibilities Clinical Operations • Operate monoplace and multiplace hyperbaric chambers in accordance with physician orders, safety protocols, and RegenQuest standard operating procedures (SOPs)., • Prepare patients for HBOT treatments, including screening, positioning, education, and documentation of vitals., • Monitor and document patient status and responses throughout hyperbaric sessions for clinical accuracy and safety., • Identify, respond to, and escalate clinical concerns or emergencies in collaboration with the supervising clinician or medical director., • Safety & Compliance, • Maintain strict compliance with NFPA 99, OSHA, UHMS (Undersea and Hyperbaric Medical Society) guidelines, and practice-specific policies., • Conduct pre- and post-treatment chamber safety checks — including pressure integrity, oxygen sensors, fire safety, and emergency systems., • Ensure infection control practices and sterile field integrity in treatment areas., • Participate in internal audits, quality improvement activities, and safety drills. Equipment & Maintenance • Perform routine equipment inspections, calibration checks, and preventive maintenance per manufacturer recommendations., • Coordinate with biomedical services or vendors for advanced repairs or re-qualifications., • Maintain inventory of supplies, emergency equipment, and documentation logs. Documentation & Records • Maintain accurate and timely documentation in Electronic Medical Records (EMR) systems, including treatment logs, vitals, patient charts, and regulatory checklists., • Assist in coding and billing support by accurately capturing treatment data required for claims and reimbursement processes. Patient & Practice Support • Educate patients and caregivers on HBOT expectations, safety restrictions, and post-treatment guidelines., • Support RegenQuest partner clinics by contributing to patient satisfaction and retention through professional, compassionate care., • Collaborate with practice teams to assist onboarding and support new wound care/HBOT program implementations. Qualifications Education • Required: High School Diploma or GED. Experience • Prior experience in a clinical setting, preferably wound care, hospital, outpatient therapy, or similar environment., • Experience with hyperbaric chamber operations and clinical monitoring is highly desirable. Certifications/Requirements Current license or certification as applicable in state of practice in one of the following areas: • Certified Hyperbaric Technologist (CHT), • Certified Hyperbaric Specialist (CHS), • Certified Hyperbaric Wound Specialist (CHWS), • Certified Respiratory Therapy Technician (CRT), • Emergency Medical Technician (EMT) or Paramedic, • Licensed Vocational Nurse (LVN), • Military Corpsman or Medical Services Specialist Skills & Competencies • Strong understanding of hyperbaric oxygen therapy principles and patient safety standards., • Excellent observational, communication, and critical thinking skills., • Detail-oriented with the ability to manage multiple tasks in a fast-paced clinical environment., • A track record of successfully interacting with patients, clinicians, and operational teams.\nCompany Description We are an outpatient vascular and wound care organization, treating patients with chronic wounds in a physician driven environment that puts patients first. We are an outpatient vascular and wound care organization, treating patients with chronic wounds in a physician driven environment that puts patients first.

Job Description We are currently looking to add a Hyperbaric Technician to our Center in Buffalo, NY. The HBO Tech plays a critical role in delivering safe, effective, and compliant hyperbaric oxygen therapy as part of AVA-RegenQuest’s wound care & vascular programs. This position ensures high-quality patient care, proper chamber operation, and strict adherence to regulatory and clinical standards while supporting the American Vascular mission of helping practices grow and improve patient outcomes across the nation. This is a full time position with an hourly comp range of $25 to $33 depending on education, certification and skills fit. We offer full med/dent/vision benefits, 401k w/matching a PTO program. There are no weekend, late night or holiday shifts. If you feel you are a match for the certification, skills and experience below, apply today! Key Responsibilities Clinical Operations • Operate monoplace and multiplace hyperbaric chambers in accordance with physician orders, safety protocols, and RegenQuest standard operating procedures (SOPs)., • Prepare patients for HBOT treatments, including screening, positioning, education, and documentation of vitals., • Monitor and document patient status and responses throughout hyperbaric sessions for clinical accuracy and safety., • Identify, respond to, and escalate clinical concerns or emergencies in collaboration with the supervising clinician or medical director., • Safety & Compliance, • Maintain strict compliance with NFPA 99, OSHA, UHMS (Undersea and Hyperbaric Medical Society) guidelines, and practice-specific policies., • Conduct pre- and post-treatment chamber safety checks — including pressure integrity, oxygen sensors, fire safety, and emergency systems., • Ensure infection control practices and sterile field integrity in treatment areas., • Participate in internal audits, quality improvement activities, and safety drills. Equipment & Maintenance • Perform routine equipment inspections, calibration checks, and preventive maintenance per manufacturer recommendations., • Coordinate with biomedical services or vendors for advanced repairs or re-qualifications., • Maintain inventory of supplies, emergency equipment, and documentation logs. Documentation & Records • Maintain accurate and timely documentation in Electronic Medical Records (EMR) systems, including treatment logs, vitals, patient charts, and regulatory checklists., • Assist in coding and billing support by accurately capturing treatment data required for claims and reimbursement processes. Patient & Practice Support • Educate patients and caregivers on HBOT expectations, safety restrictions, and post-treatment guidelines., • Support RegenQuest partner clinics by contributing to patient satisfaction and retention through professional, compassionate care., • Collaborate with practice teams to assist onboarding and support new wound care/HBOT program implementations. Qualifications Education • Required: High School Diploma or GED. Experience • Prior experience in a clinical setting, preferably wound care, hospital, outpatient therapy, or similar environment., • Experience with hyperbaric chamber operations and clinical monitoring is highly desirable. Certifications/Requirements Current license or certification as applicable in state of practice in one of the following areas: • Certified Hyperbaric Technologist (CHT), • Certified Hyperbaric Specialist (CHS), • Certified Hyperbaric Wound Specialist (CHWS), • Certified Respiratory Therapy Technician (CRT), • Emergency Medical Technician (EMT) or Paramedic, • Licensed Vocational Nurse (LVN), • Military Corpsman or Medical Services Specialist Skills & Competencies • Strong understanding of hyperbaric oxygen therapy principles and patient safety standards., • Excellent observational, communication, and critical thinking skills., • Detail-oriented with the ability to manage multiple tasks in a fast-paced clinical environment., • A track record of successfully interacting with patients, clinicians, and operational teams.

Job Description In-House Service Technician Overview: We are seeking a skilled and experienced Level 3 In-House Service Technician to join our Service Team. This position is responsible for the diagnosis, troubleshooting, repair, and validation of equipment returned to Viridi for service. The primary focus of this role will be Battery Energy Storage Systems (BESS), electric excavators, battery packs/modules, and related electrical and mechanical systems. This is an in-house technical position and is not customer-facing. The technician will work closely with the Service Manager, Service Engineers, Quality, Engineering, and Operations to safely identify equipment failures, perform approved repairs, and return equipment to proper operating condition. What We Are Looking For: The ideal candidate is a hands-on technical problem solver who is comfortable working with complex electrical, battery, and mechanical systems. This technician should be capable of independently diagnosing faults, performing detailed repairs, following engineering and service procedures, and documenting findings accurately. Success in this role means completing repairs safely, correctly, and efficiently while maintaining a high standard of workmanship and documentation. Responsibilities: • · Diagnose, troubleshoot, and repair BESS equipment, electric excavators, battery packs/modules, and associated electrical and mechanical systems., • · Perform approved repairs on equipment returned to Viridi for service., • · Perform battery inspection, diagnostics, disassembly, repair, reassembly, and validation as required., • · Connect to batteries and equipment to collect diagnostic data, review fault codes, and identify system issues., • · Troubleshoot BMS, electrical, communication, charging, control, and mechanical system faults., • · Utilize electrical schematics, wiring diagrams, service documentation, and engineering instructions when performing repairs., • · Safely utilize meters, diagnostic software, torque tools, and other required test equipment., • · Follow established procedures for high-voltage battery systems, lockout/tagout, electrical safety, and battery handling., • · Work with Service Engineering and other technical teams to assist with failure analysis and root-cause investigations., • · Complete required testing and verification following repairs prior to equipment release., • · Accurately complete, document, and close Repair Orders., • · Record detailed daily repair notes, findings, parts used, and work completed in Odoo., • · Escalate unusual failures, safety concerns, recurring issues, or conditions outside approved repair procedures., • · Maintain tools, work areas, battery repair areas, and equipment in a clean, organized, and safe condition., • · Support production, retrofit, rework, or other technical activities when service workload allows and with supervisor approval., • · Follow approved work instructions, Service Bulletins, engineering documentation, and quality requirements. Requirements: • · High school diploma or equivalent required., • · Technical school, electrical/mechanical training, or equivalent hands-on experience preferred., • · 3+ years of relevant technical, electrical, mechanical, automotive, heavy-equipment, battery, or industrial service experience preferred., • · Strong troubleshooting ability with electrical and mechanical systems., • · Experience using digital multimeters and other electrical diagnostic equipment., • · Ability to read and interpret electrical schematics, wiring diagrams, and technical documentation., • · Experience with battery systems, BMS diagnostics, lithium-ion batteries, high-voltage DC systems, EV equipment, or energy storage systems strongly preferred., • · Strong mechanical aptitude and ability to safely perform equipment disassembly and reassembly., • · Ability to follow torque specifications, repair procedures, safety requirements, and quality standards., • · Strong computer skills and ability to accurately document repair activity in Odoo and other service systems., • · Ability to manage multiple pieces of equipment and repair priorities in a fast-paced environment., • · Detail-oriented, self-motivated, and capable of working independently., • · Strong written and verbal communication skills for communicating technical findings internally., • · Safety-conscious and committed to following established procedures., • · Positive, collaborative, and team-oriented mindset. Salary: • $19 - $22 per hour, depending on experience and qualifications

Job Description Location: This position is 100% onsite and reports to our Buffalo location with regional travel to client job sites. Job Summary: Join an Award-Winning Team: Eastern Security Services, proudly recognized as one of Central New York’s Best Places to Work and the 2023 Family Business Leader of the Year, is seeking motivated and skilled individuals to join our elite installation team in the Buffalo area! As an Installation Technician, you will play a vital role in protecting people, property, and assets by installing, testing, and servicing advanced security and life safety systems. These include intrusion detection, fire alarm systems, video surveillance, access control, intercom, mobile surveillance trailers, and weapons detection systems. If you are tech-savvy, adaptable, and eager to grow, we want YOU to be part of our team! At Eastern Security Services, we work with cutting-edge technology and foster a people-first company culture of continuous learning and excellence. Salary Range $30.00 per hour - $40.00 per hour Responsibilities: • Travel to residential and commercial customer locations in the Syracuse area and surrounding regions to perform installations and service work, • Run wiring, mount devices, and install a variety of systems, including intrusion alarms, fire alarms, video surveillance, access control, and intercom systems, • Ensure every installation meets high-quality standards through thorough testing and calibration, • Talk over, upgrade, or seamlessly integrate with existing security systems, • Deliver exceptional customer service by offering clear explanations, troubleshooting issues, and occasionally providing training on how to use their systems effectively, • Set up mobile and desktop applications for system monitoring and management Basic Qualifications: • High School Diploma or GED, • Comfortable working outdoors – occasionally in the rain or snow, • Comfortable working from heights on ladders or aerial lifts, or in small spaces, • Self-motivated to learn new technology, • Must maintain a clean, professional image with external and internal customers, • Ability to travel as required, • Ability to work overtime as required and participate in on-call schedule after six months, • Excellent communication (verbal and written) and interpersonal skills, • Must possess and maintain a clear driver's license and safe driving record Preferred Qualifications: • Two (2) year Associate Degree, • Previous alarm installation and service experience, • OSHA 10 or OSHA 30 What awaits you at Eastern Security: • Comprehensive Benefits Package: medical, dental, vision, and life insurance, employee assistance program, 401(k) with company matching, and more, • 3 Weeks of PTO during first full year of employment – including vacation, sick/personal leave, paid holidays and floating holidays, • Industry-leading pay with monthly bonus opportunities and annual performance reviews, • Company vehicle, gas card, phone, and laptop, • Paid on-the-job training, • An open door to management – you are ALWAYS heard and respected!, • Commitment to maintaining a safe and supportive work environment Employers Disclaimer: • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship. INDRR11

As a Senior Quality Engineer in Storable’s Marine Division, you will partner closely with product managers, software engineers, architects, and other quality engineers to deliver reliable, customer-focused software. Quality Assurance or Quality Engineering experience. You are the kind of quality e

Version one of that quality system is live today for our flagship product line: agents draft manual tests from feature specs and stories through a gated workflow with documented why-manual criteria; QA reviews and activates them; releases run through evidence-backed gates in our test-management syst

Eaton's IS AER MSD division is currently seeking a Quality Inspector III- Final Inspection - 1st Shift. The primary role for the Quality Inspector is to perform inspections of parts, assemblies, and documentation. Utilize Non-Conforming Material Control process to document parts that do not meet spe

Aerotek - - Responsibilities: Assemble industrial cooling and electro-mechanical systems; Read work orders, blueprints, and build instructions; Use hand and power tools to build components; Assemble frames, piping, wiring, and cooling units; Inspect products for quality and accuracy.

The Assembly Technician is responsible for performing a variety of assembly, gasket-cutting, adhesive-application, and equipment-handling operations. Take responsibility for the quality of completed work.

The position requires visual inspection and, at times, functional testing to ensure quality workmanship, use of product drawings and work instructions, and accurate record keeping within our computer software program. Understand and follow the organizations Quality Management System.

The Assembly Technician is responsible for performing a variety of assembly, gasket-cutting, adhesive-application, and equipment-handling operations. Take responsibility for the quality of completed work.

For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.

The Assembly Technician is responsible for performing a variety of assembly, gasket-cutting, adhesive-application, and equipment-handling operations. Take responsibility for the quality of completed work.

We're looking for a Quality Control Inspector to help us maintain the highest standards of product safety and quality. Partner with production and cross-functional teams to enhance process robustness and minimize customer-facing quality risks. Quality in Manufacturing and Distribution.

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come.Our pioneering and inventive spirit has enabled us to be at the forefron Assembler, Benefits, Electronics, Assembly, Manufa

Product Assembler Technician (IHC). You will first be certified as an In-Home Assembler Technician, which means you will assemble for our customers like Leggett and Platt, Rooms to Go, and more. In-Home Product Assembler Technician Duties.

As a Warehouse Quality Control Specialist, you will be responsible for assisting with warehouse operations and ensuring smooth logistics, including: organize inventory and ensure items are stored properly.

Completes all necessary paperwork and documentation to ensure quality conformance and the proper movement and control of product as well as all quality related inspection requirements. Perform additional varied tasks related to the quality function. Participates in Quality investigations and continu