Reading jobs in Syracuse, NYCreate job alerts

Job DescriptionDescription: The Grinder/ Metal Finisher position is quite varied with regard to the scope of work performed. The use of various grinding tools and attachments to obtain required surface finish. Workers who are designated as Grinder/ Metal Finishers may also be tasked with other general work tasks not specifically covered under the Grinder/ Metal Finisher job description. Requirements: Essential Functions of Position: · Comply with all Feldmeier safety and Company policies and Occupational Health and Safety Regulations. · Interpret blueprints, drawings, and measurements to plan layouts. · Layout component locations per instructions. · Prepare work surface via cutting and finishing. · Set up and operate grinding equipment for assigned jobs. · Complete housekeeping duties in assigned area or as requested by management. · Complete all required paperwork and properly log time into the MES system, logging on and off. Minimum Qualifications: · Previous fabricating experience · Ability to read measuring tapes and operate tools- grinder, and welding torch. Preferred Qualifications: · 2 or more years of Grinding experience · 2 or more years of fabrication and blueprint reading. Physical Requirements: · Ability to stand and/or walk for up to 8 hours per day. · Occasional lifting, carrying, and maneuvering up to 50 pounds. · Ability to climb ladders, stairs, and platforms for elevated work. · Walking, bending, squatting, kneeling, balancing, stooping, lie down inside or under vessel and twisting while performing required job tasks. · Being mindful of chemical safety and use proper PPE when required. · Being able to hold a 20lbs grinder for prolonged periods, while applying force. Pay Range $19.00 - $31.00 per hour

Job Description The Source Inspector, (SI) is responsible for performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection. The source inspection may include reviewing all paperwork relating to the product at hand. This includes operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly. The SI will also verify FAI’s to AS9102 for accuracy and completeness. The SI must be familiar with hand tools and gaging techniques. The SI will also be fluent in B/P interpretation and GD&T. Source Inspection will occur at end customer’s suppliers’ location. The SI will travel to these locations. Job Functions: • Experienced quality individual in dimensional and visual inspection of aerospace machined components, • Experience in performing FAI’s – AS9102 (The SI will verify supplier’s FAI, not perform them), • Experience with hand measurement tools, • Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required), • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required), • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • MS Outlook, and EXCEL experience, • Mechanical inspection experience preferred, • Strong verbal, written and communication skills, • Fluent English – reading and writing is required, • Professionalism, integrity, and exceptional attention to detail, • Strong independent decision-making skills; excellent analytical skills and professional judgment, • Excellent interpersonal, written, and verbal communication skills, • Work as an effective team member, • Establish and maintain effective working relationships, • Fluent English – reading and writing is required, • Pass pre-hire background check including DMV and credit screening, • Pass Pre-hire Drug Screening, • The work is performed under general supervision, • Valid drivers' license and auto insurance required, • 3+ years’ experience as a quality inspector, technician, or engineer., • 3+ years’ experience in an aerospace manufacturing facility, • 3+ years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation, • Proficient with Microsoft Outlook and Excel, • Effective communication skills, • Detail oriented, • Any combination of education and experience may be considered BENEFITS: • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement (.70/mile 2025) when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • Overnight trips - Up to $75, • Leaving home after 4 pm $40, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded), • Additional $750 paid upon referral’s full completion of 90 days’ employment Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Powered by JazzHR EisT62pyNA

Job DescriptionDescription: The Grinder/ Metal Finisher position is quite varied with regard to the scope of work performed. The use of various grinding tools and attachments to obtain required surface finish. Workers who are designated as Grinder/ Metal Finishers may also be tasked with other general work tasks not specifically covered under the Grinder/ Metal Finisher job description. This shift runs Monday through Thursday from 3:30pm -2am. Requirements: Essential Functions of Position: · Comply with all Feldmeier safety and Company policies and Occupational Health and Safety Regulations. · Interpret blueprints, drawings, and measurements to plan layouts. · Layout component locations per instructions. · Prepare work surface via cutting and finishing. · Set up and operate grinding equipment for assigned jobs. · Complete housekeeping duties in assigned area or as requested by management. · Complete all required paperwork and properly log time into the MES system, logging on and off. Minimum Qualifications: · Previous fabricating experience · Ability to read measuring tapes and operate tools- grinder, and welding torch. Preferred Qualifications: · 2 or more years of Grinding experience · 2 or more years of fabrication and blueprint reading. Physical Requirements: · Ability to stand and/or walk for up to 8 hours per day. · Occasional lifting, carrying, and maneuvering up to 50 pounds. · Ability to climb ladders, stairs, and platforms for elevated work. · Walking, bending, squatting, kneeling, balancing, stooping, lie down inside or under vessel and twisting while performing required job tasks. · Being mindful of chemical safety and use proper PPE when required. · Being able to hold a 20lbs grinder for prolonged periods, while applying force.

Job Description Overview At Community Financial System, Inc. (CFSI), we are dedicated to providing our customers with friendly, personalized, high-quality financial services and products. Our retail division, Community Bank, N.A., operates more than 200 customer facilities across Upstate New York, Northeastern Pennsylvania, Vermont and Western Massachusetts. Beyond retail banking, we also offer commercial banking, wealth management, investment management, insurance and risk management, and benefit plan administration. Just as our employees are committed to helping our customers manage their finances, we’re committed to our employees. After all, they make it happen for our customers every day. To ensure our people can enjoy long and successful careers here at CFSI, we offer competitive compensation, great benefits, and professional development and advancement opportunities. As an equal-opportunity workplace and affirmative-action employer, we celebrate and support a diverse workplace for the benefit of all: our employees, customers and communities. Responsibilities Supports the Bank’s Commercial Appraisal Manager in the commissioning and review process, whose purpose is to ensure that appraisals are independently commissioned from competent appraisers, appraisals are completed in compliance with all applicable laws and regulations, value conclusions are appropriate and fully supported, and the Bank has sufficient third party appraisal resources available to allow for timely turnaround of loan transactions. • Commissions new appraisals supporting commercial loan transactions., • Fields questions from fee appraisers and clarifies Bank requirements., • Researches issues, • Discusses with account officer and Commercial Appraisal Manager as needed and determine course of action based on policy requirements, • Negotiates the fee structures with appraisal firms., • Reviews commercial appraisals in-line with bank policy, • Exercises independent decision-making authority in the resolution of appraisal issues. Qualifications Education/Training: BS or BA degree in Business or a related field along with specialized education in commercial property appraisal theory and application; licensed as a state certified appraiser in New York and/or Pennsylvania. All applicants must be 18 years of age or older. Skills: Proficient reading, writing, grammar, and mathematics skills; proficient interpersonal relations and communicative skills; a thorough knowledge of appraisal theory relative to all types of commercial real estate; demonstrated project management skills; and, personal computer proficiency including an intermediate knowledge of Microsoft Word & Excel. Experience: Minimum 2 – 3 years of experience completing a wide variety of commercial appraisal and appraisal review assignments. In-depth knowledge of USPAP is required and solid experience dealing with complex appraisal assignments is a plus. Prior commercial real estate lending experience helpful, but not required; however, a sound working knowledge of issues inherent in commercial real estate lending must be demonstrated.

Job Description 1:1 Part-time Support Staff Need (Job #MG-BP) A man that lives in North Syracuse is looking for a Direct Support Professional to assist him with 6 hours of community habilitation support a week. His interests include cooking, gardening, watching Television and reading. You'll work side by side with him to improve his independence with activities of daily living, increase his fitness activity and positive communication, and explore volunteering options that are of interest to him. The ideal candidate has experience and is motivating, active and friendly. The ideal candidate should be comfortable with animals, as there is a dog at home. This is a part-time position but additional hours are available with other people receiving services at the agency. Hours and days of work: flexible hours between 10 and 5 on Mondays, Wednesdays and Thursdays Starting pay: Starting pay is $18.50/hour and increases with years of relevant experience Location: North Syracuse, NY Qualifications: • Must be at least 18 years old, • Ability to work independently in the person's home and/or community, • Reliable with effective communication and organizational skills, • No experience required though experience working with people with disabilities preferred, • New York State Driver's license, reliable transportation, and proof of auto insurance is required; acceptable driving record required, • Must have technology available to download multiple apps for use in the community EOE Background check, fingerprinting and DMV record check will be conducted prior to hire by the non-profit agency. Job Posted by ApplicantPro

Job Description We are looking to hire an experienced estimator to determine the approximate costs of projects for industrial and residential projects. The estimator’s responsibilities include determining how long each contracting job will last, researching market prices for project materials and equipment, and communicating with clients to determine the scope of each project. You should also be able to identify ways to continually improve cost-estimating procedures to reduce inconsistencies between estimated and actual project costs. To be successful as a commercial construction estimator, you should be detail-oriented and have sound knowledge of building codes. Ultimately, an exceptional Estimator should be adept at reading building plans and demonstrate outstanding analytical and problem-solving skills. • Quantity Takeoff analyzing blueprints to determine wire lengths, determining the amount, type, and cost of materials needed for each project., • Determining the amount of labor required to complete each project., • Obtaining pricing from Vendors and Subcontractors for Bids., • Submitting RFI’s during bidding period., • Obtaining Bid bonds when required., • Populating Bid Forms and Bid Breakdowns., • Preparation of MWBE Bid documents., • Assisting Project Managers with Change Order Pricing., • Participating in Value Engineering exercises., • Determining the potential profitability of projects to assist management in making sound bidding decisions., • Providing viable solutions to increase project profitability., • Completing and submitting competitive project bids in accordance with established guidelines., • Descoping Vendors and Subcontractors., • Regularly participating in updating cost databases to accurately reflect fluctuating material and labor costs., • Evaluating labor and material costs to determine whether it is more feasible to construct components or sub-contract the construction of components., • Conduct post project reviews to determine areas for future improvement., • Develop/maintain network of professional relationships within our industry., • Participating in the Design Build and Design Assist processes., • Handing off Bid to Project Management., • Proficient in Plan Swift Software, • Proficient in Microsoft Office Product Suite

Job Description Overview At Community Financial System, Inc. (CFSI), we are dedicated to providing our customers with friendly, personalized, high-quality financial services and products. Our retail division, Community Bank, N.A., operates more than 200 customer facilities across Upstate New York, Northeastern Pennsylvania, Vermont and Western Massachusetts. Beyond retail banking, we also offer commercial banking, wealth management, investment management, insurance and risk management, and benefit plan administration. Just as our employees are committed to helping our customers manage their finances, we’re committed to our employees. After all, they make it happen for our customers every day. To ensure our people can enjoy long and successful careers here at CFSI, we offer competitive compensation, great benefits, and professional development and advancement opportunities. As an equal-opportunity workplace and affirmative-action employer, we celebrate and support a diverse workplace for the benefit of all: our employees, customers and communities. Responsibilities A Commercial Banking Officer - Business Banking is responsible for performing a variety of duties to meet the commercial services needs of business customers, achieving customer service goals as established in the Commercial Banking Department's annual operating plan, complying with operating policies and procedures established for the commercial services function, communicating with appropriate personnel, responding to inquiries or requests for information, maintaining appropriate records and providing assigned reports. This position is also responsible to accurately risk rate assigned loan relationships on a timely basis. • Performs a variety of duties to meet the commercial sales and services needs of business customers as follows:, • Maintains ongoing business relationships with present customers in order to take advantage of additional cross-selling opportunities and solicit other new business, • Makes outside sales calls on prospective customers to assess needs, and describe and sell products and services., • Provides sales information on a timely basis in order that this information may be included as part of customer service and sales performance reports., • Monitors individual sales performance versus objectives on a regular basis; discusses performance with appropriate supervisor on a frequent basis., • Serves as a member of the bank's sales team, e.g., Branch Manager; makes group sales calls where these types of calls will improve the opportunity for new business development., • Maintains a thorough knowledge of the features and benefits of all bank commercial products and services in order to ascertain customer needs and to sell in conjunction with these needs., • Provides direct service to commercial customers of the bank with respect to deposit, loan, and other miscellaneous products and services; approves or rejects loan applications within individual lending authority., • Assists customers in obtaining specialized services from other bank departments as necessary; provides help to customers with specific inquiries or service problems., • Maintains a working knowledge of bank operating policies and procedures with impact commercial services., • Prepares and maintains accurate records of all customer sales and service calls made and meetings held with present and prospective customers., • Provides quality service to customers, whether internal or external., • Demonstrates cooperative efforts in working with other departments and within own department., • Jointly establishes annual quantitative customer service and sales objectives with assigned supervisor; this activity to be integrated with the Commercial Banking Department's annual operating plan., • Complies with established operating policies and procedures in order to maintain adequate controls and to support the bank's adherence to outside regulatory requirements., • Communicates with management and staff personnel in order to integrate goals and activities., • Responds to inquiries relating to his/her particular area, or to requests from other bank personnel, customers, etc., within given time frames and within established policy., • Maintains appropriate records and provides assigned reports., • Monitors and reviews accounts for appropriate risk rating to avoid risk rating changes by Loan Review, the OCC or other loan review processes., • Other related duties as assigned or directed. Maintain proficient knowledge of, and demonstrate ongoing compliance with all laws and regulations applicable to this position, ensure ongoing adherence to policies, procedures, and internal controls, and meet all training requirements in a timely manner. Qualifications • Minimum 3+ years’ experience in related positions normally required with an emphasis on Middle Market Banking, • B.S./B.A degree in a related fiend of study normally required, • Specialized banking education and training., • Proficient reading, writing, grammar, and mathematics skills., • Proficient interpersonal relations and communicative, and sales skills., • A thorough knowledge of the features and benefits of all bank commercial products and services., • A working knowledge of bank operating policies and procedures, which impact commercial services., • Valid driver’s license., • All applicants must be 18 years of age or older.

Job Description Adecco is hiring for a CNC Machinist 2 – Second Shift A well-established manufacturer in East Syracuse, NY, with over 50 years of experience in rapid prototyping and low-volume production of machined castings, is seeking a Second Shift CNC Machinist 2. Compensation: * $24–$29/hour, based on experience * 10% second shift differential Benefits: * Paid holidays, vacation, and sick time * 401(k) retirement plan * 100% company-paid life insurance * Medical, dental, and vision insurance * Supplemental insurance (short-term disability, accident, cancer, critical care) * Bonus and referral programs * Safety awards * Free coffee at multiple in-house kiosks Key Responsibilities: * Set up and operate multi-axis CNC milling machines using blueprints or process sheets * Obtain first piece approval from Quality Inspection * Perform in-process inspections using hand tools (micrometers, calipers, etc.) * Monitor and replace tooling as needed * Troubleshoot machining issues * Maintain accurate production and quality records * Interpret blueprints and GD&T specifications * Program and input CNC instructions (tool offsets, compensation, etc.) * Ensure adherence to safety and quality standards * Perform preventative maintenance * Communicate with other shifts to ensure workflow continuity * Train junior machinists as needed * Perform additional duties such as deburring and secondary operations during cycles Qualifications: * High school, technical school, or BOCES graduate * Minimum 2 years of CNC machine setup and operation experience (vertical & horizontal centers) * Proficient in reading blueprints and using precision measurement tools * Strong attention to detail Physical Requirements: * Ability to stand for extended periods, walk, reach, stoop, kneel * Lift up to 35 lbs as needed Pay Details: $24.00 to $29.00 per hour Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionCNC Machinist – Direct Hire!Starting pay: $37,440/hour, depending on experienceDays: Monday- FridayHours: 2nd shift 3:30 p.m. - 12:00 a.m. p.m. Staffworks is seeking a reliable CNC Machinist for a direct placement for their award-winning client! What's in it for you? • Great starting rate, • Immediate hire on to the company, • Operates a CNC milling machines., • At specified frequencies, uses a variety of hand inspection tools such as but not limited to micrometers, calipers, indicators etc. to compare a part dimensions with the blueprint or process and records the data on the required paperwork., • Loads feed mechanism by lifting stock into position., • Verifies settings by measuring positions, first-run part, and sample work pieces; adhering to international standards., • Maintains specifications by observing milling operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes., • Technical, BOCES, or high school graduate with experience in blueprint reading, using measuring instruments, and manual or CNC machine center operation or equivalent and one (1) year of experience., • Ability to read prints, diagrams, and use micrometer, verniers, calipers, and gauges.

Job Description Venue Manager The Venue Manager will work closely with the Area/Regional Manager and is responsible for effectively leading and managing all operational aspects of the park. This position is responsible for accomplishing performance objectives focused on driving sales and profitability based on set target. The role will ensure brand standards are met with the objective of meeting or exceeding guest expectations. Creating and supporting a culture that follows our Mission Statement. Duties/Responsibilities:  Functioning as the key strategic leader of the park with responsibility for all aspects of the operation, including guest and team member satisfaction, performance management, and sales and revenue generation  Analyzing business results with the Area Manager and working with the Supervisory team to implement effective strategies to address needs. Overseeing execution, removing obstacles to success and ensuring appropriate resources are available to achieve business results  Driving the sales culture in the park through active involvement in the sales process, including implementing effective revenue management strategies and setting aggressive goals that will drive the park’s financial performance  Oversee team hiring, training, HR documentation and evaluations  Manage Payroll percentages and budgets and executes efficient and cost effective weekly schedules  Manage the cash reconciliation and audit functions for the location. Ensure compliance with all company Loss Prevention policies and procedures  Interact with corporate team and individual department heads to ensure that store’s operation priorities are aligned and compliant with company direction  Implements and enforces policies and procedures of the company to ensure maximum income from all areas of the business under direct supervision  Prepares reports and present audit results and action plans on issues regarding sales, operations, safety, security, cleanliness, facility maintenance and human resources  Striving each day to lead an operational sound park, with peak safety and security standards, awareness of all operational processes and the ability to coordinate those processes through the Supervisory team  High regard and attention to facility cleanliness, operational excellence through the park and park systems.  Creating an environment in which all associates have the ability to reach their full potential  Ensuring that all associate and business decisions are in line with Billy Beez’s Standard Operating Procedure, Employee Handbook and Mission Statement Required Skills/Abilities:  Proven track record in delivering financial results, enhancing profitability, sustainability and creativity across all channels in alignment with business strategy.  Proven track record of building a cohesive team and facilitating goal accomplishment  Ability to inspire team members and to create a culture of care and accountability  A demonstrated ability to assess and grow: people, operations, standards and revenue  Proven ability to manage budget in a high volume environment JOB DESCRIPTION  Commitment to exceptional guest service with ability to solve problems under pressure while maintaining a professional and friendly environment  Strong communication and listening skills, excellent speaking, reading and writing skills  Excellent leadership skills with a lead by example attitude.  Excellent verbal and written communication skills  Excellent interpersonal and customer service skills  Excellent organizational skills and attention to detail  Excellent time management skills with a proven ability to meet deadlines  Ability to function well in a high-paced and at times stressful environment  Proficient with Microsoft Office Suite or related software  Education and Experience:  Minimum of 3 years’ experience in a management or leadership position  Strong organizational, problem-solving skills  Ability to manage priorities and workflow as well as working with a team  Strong interpersonal and communication skills  Formal management training(optional)

Job Description Self-Direction DSP - Syracuse Area (Job #BA-EG) Exceptional Family Resources is seeking a Direct Support Professional (DSP) to work in the Syracuse area with a 13 year old boy who requires verbal encouragement and physical assistance with activities of daily living and personal care due to an intellectual disability. Training is provided through this agency. The DSP will drive this person to his preferred activities and participate alongside him. The DSP will work with him in his home and his community. The individual is looking for a dedicated and patient staff to assist him with learning skills for independence at home and in community settings. Examples of this may include: counting money, researching activities, practicing reading and writing skills, practicing time management, practicing appropriate behaviors for public settings. He is interested in exploring malls, parks, libraries, trampoline parks, zoos, and other recreational settings. He'd like to make friends. He'd like to develop a routine of activities to look forward to. He'd like assistance to communicate with others and make follow up plans. This individual is brave, friendly, and playful. He communicates verbally. He walks independently. He needs reminders to practice social etiquette. We are looking for individuals who are reliable. Prior experience is valued, not a requirement. Reliable transportation and a HS diploma/GED are required. Background check, fingerprinting and DMV record check will be conducted prior to hire by the non-profit agency. Hiring for the following shifts with flexibility: Monday to Friday 3:30 PM- 5:30 PM Saturday and Sunday 12 PM-5 PM This schedule is flexible. Individual willing to consider different schedule/shifts for the right applicant. The pay rate is $21.50 and $25/hour per hour depending on program worked. EFR is an Equal Opportunity Employer. Background check, fingerprinting and DMV record check will be conducted prior to hire by the non-profit agency. Job Posted by ApplicantPro

Job Description1st Shift Pattern MakerHours: 6am-2:30 Days: Monday - Friday Pay: 15-25 per hour depending on experience Staffworks is seeking a reliable Pattern Maker to join their award-winning team! What's in it for you?Great Starting RateWeekly PayTemp to Hire Opportunity Pattern Maker Details: • Lays out and constructs complex models and molds using blueprints, master patterns and stereo models to build molds, rubber resin tooling, determine joints and parting, add draft filets and radii, etc., • Plans sequence of operations, • Using three axis CAM software, interprets files, programs CNC machines and prep CAD files, • Sets up and operates a wide variety of machinery such as lathes, drills, milling machines, CNC machines, etc. as required, • Grinds, files and sands parts for assembly of a smooth and finished cavity, • Rigs molds as required, • Builds fixtures and templates, • Monitors tooling for wear and breakage and replaces as necessary., • Performs routine machine maintenance., • Adds stock to models to allow for machining tolerances, • Coaches and trains employees as requested, • Meets quality and quantity standards for the position., • Proactively supports the ISO process approach to quality management and the Syteline MIS system. Pattern Maker Qualifications: * High school diploma or equivalent or Trade School graduate with training in shop math, blueprint reading and machine set-up * Completion of a Pattern Maker apprenticeship * Five (5) years of experience * Must be able to lift up to and including 35 pounds as needed. We are an Equal Opportunity Employer and celebrate diversity at all levels of our organization.How to Apply: (315) 455-9675

Job DescriptionDescription: We are seeking a dynamic and experienced SANY Literacy Curriculum Coordinator for grades K-12 to enhance and optimize our established literacy and language arts programs across all SANY schools. This vital role involves refining our existing literacy curriculum to ensure it continues to meet and exceed district and state standards, promoting an environment where both students and teachers strive for excellence in literacy education. Job Goals: The SANY Literacy Curriculum Coordinator will continue to advance, articulate, implement, and assess our comprehensive literacy program that is research-based and meets the diverse needs of our students across the entire district. Position Responsibilities: • Curriculum and Instruction: Serve as the SANY leader on curriculum and instruction in literacy across all K-12 grade levels. Maintain and enhance the alignment of the literacy curriculum with state standards. Manage, coordinate, and monitor instructional programs while ensuring timely updates to the curriculum., • Assessment and Intervention: Assess the performance and impact of existing literacy programs on student achievement. Lead data meetings to scrutinize literacy performance data and develop and implement strategic intervention programs as required., • Staff Development: Lead SANY-wide staff development initiatives focused on literacy education. Design and conduct professional development sessions, workshops, and training for literacy educators throughout the district., • Demonstrate exemplary instructional leadership by modeling effective literacy teaching strategies and actively participating in curriculum refinement., • Stay abreast of the latest trends and research in literacy education through ongoing professional development., • Facilitate the development and implementation of SANY-wide school improvement plans with a focus on literacy objectives., • Uphold professional standards at all times, adhering to the guidelines outlined in the SANY Employee Handbook., • Foster a positive and constructive atmosphere in all school interactions., • Adhere to the established chain of command for all academic and interpersonal matters., • Master’s degree in Literacy, Reading Education, Curriculum & Instruction, or a closely related field., • Minimum of 5 years of successful teaching experience in ELA or literacy-focused roles (K–12)., • Demonstrated success in literacy curriculum development and reading intervention design., • Experience in leading district-wide professional development for literacy educators., • Strong understanding of NYS English Language Arts Standards, Foundational Literacy Skills, and adolescent literacy development., • Expertise in research-based literacy practices, including phonics, comprehension strategies, writing instruction, and reading across the curriculum., • Familiarity with MTSS frameworks and intervention models for struggling readers., • Commitment to fostering a district-wide culture of reading, writing, and communication excellence., • Strong organizational and leadership skills to coordinate literacy programming across multiple sites., • Passion for equity and ensuring all students achieve literacy proficiency., • Valid driver’s license and willingness to travel to schools within a 2-hour range, including operation of district vehicles. Application Instructions: Interested candidates should submit a resume, cover letter, and professional references. SANY is an equal opportunity employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description CNC Machinist Set Up 1st Shift Monday – Friday 6:00am – 2:30pm $20 - $25 per hour DOE Job Duties • Set up and operate one or more of a variety of CNC Machines, • Troubleshoot CNC issues as they may be related to set-up as necessary, • Use a variety of hand inspection tools such as micrometers, calipers, indicators, etc., • Notify the supervisor of any operations problems, • Technical, BOCES, or high school graduate with experience in blueprint reading, using measuring instruments, and manual or CNC machine center operation or equivalent, • 3 years’ experience setting up CNC Machines, preferably horizontal milling machines, • Ability to read prints, diagrams and use micrometer, verniers, calipers and gauges

Job DescriptionDescription: Advance Your Career in Environmental Science – Make a Real-World Impact Looking to take your environmental career to the next level with hands-on, impactful work? Join a mission-driven team dedicated to protecting natural resources, ensuring regulatory compliance, and building more sustainable communities. As an Environmental Specialist II, you’ll lead Phase I & II Environmental Site Assessments, conduct field investigations, and support remediation efforts that make a real difference. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Conduct Phase I and II Environmental Site Assessments (ESAs), due diligence investigations, and compliance audits in accordance with ASTM standards., • Perform field inspections, including sampling of soil, water, and air; well monitoring; and operation and maintenance of remediation systems., • Oversee subcontractors during field activities with minimal supervision and coordinate effectively with laboratories for sample submission and chain-of-custody documentation., • Conduct compliant asbestos building inspections, quantifications, draft reporting, and project air monitoring., • Conduct compliant materials inspections for lead paint, PCB-caulk, mold, and universal waste., • Prepare technical reports, analytical data tables, and collaborate on GIS mapping for project documentation., • Serve as Site Safety Officer, ensuring compliance with safety protocols and training requirements., • Coordinate with regulatory agencies and support abatement-phase construction administration., • Collaborate across multidisciplinary teams to deliver integrated environmental solutions., • Ensure QA/QC standards are met throughout the project lifecycle. Your Impact Matters, Your Career Thrives. Work on engaging environmental projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Eligible for Straight-time Overtime, • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-CA1 Requirements: What You Bring, Your Expertise as an Environmental Specialist II • B.A. in Environmental Science, B.S. in Environmental Engineering, or related field., • Minimum of 5-10 years of related experience., • OSHA HAZWOPER 40-Hour with current 8-Hour OSHA HAZWOPER annual refresher., • NYSDOL-Certified Asbestos Building Inspector, strongly preferred., • NYSDOL certifications including Asbestos Air Monitor, Project Designer, or Mold Assessor a plus., • Willing to travel and work 10+ hour field days in peak season., • Proficient in Microsoft Office, AutoCAD, Bluebeam, PDF; experience with ArcGIS/View, Survey123 preferred., • Proven knowledge of sampling methods and environmental regulations and guide documents., • Ability to read plans and understand building systems (HVAC, insulation, products)., • Experience reading and understanding GIS mapping, contour mapping, and data driven plume mapping., • Ability to direct contractors, drillers, and other field subcontractors during field projects., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of projects, prioritize tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Committed to building trust and collaboration through integrity, respect, and active listening., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be able to lift up to 25 pounds at a time., • Ability to stand and walk for long periods of time and distance., • Must be able to travel to various project sites., • Must be able to access and navigate construction sites and job areas., • Must pass respirator medical clearance and respirator fit test., • Must be able to wear a respirator for required work, occasionally for extended periods of times., • Must be comfortable wearing project-specific level of Personal Protective Equipment (PPE) such as Tyvek suits, nitrile gloves, safety glasses, hard hat, and steel toe boots.

Job DescriptionDescription: Environmental Specialist I Syracuse, NY Environmental Specialist – Advance Your Career & Make a Lasting Impact Join a purpose-driven team as an Environmental Specialist I and help create safer, healthier communities through meaningful environmental work. In this hands-on role, you’ll support site assessments, environmental investigations, and remediation efforts that shape safer, healthier communities. Ready to grow your career and make a difference? Apply today. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Demonstrate strong understanding of field sampling methodologies, environmental regulations, and quality control/assurance protocols., • Conduct environmental investigations, site assessments, visual inspections, and compliance audits., • Perform field inspections, including sampling of soil, water, and air; well monitoring; and operation and maintenance of remediation systems., • Independently oversee subcontractor field activities and coordinate with State and Federal regulatory agencies., • Coordinate with laboratories for bottle orders, sample submission, and Chain-of-Custody documentation., • Complete and adhere to required safety training and plans; may act as Site Safety Officer on projects., • Conduct ASTM compliant Phase I Environmental Site Assessment (ESAs) and Phase II ESA field documentation., • Prepare technical reports, analytical data tables, and collaborate on GIS mapping for project documentation., • Conduct asbestos inspections, quantifications, reporting, and air monitoring per state and federal regulations., • Conduct hazardous materials inspections such as lead-based paint, PCB-caulk, and universal waste per state and federal regulations., • Conduct mold inspections consistent with state requirements., • Ensure QA/QC standards are met throughout the project lifecycle. Your Impact Matters, Your Career Thrives. Work on engaging environmental projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Eligible for Straight-time Overtime, • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. Requirements: What You Bring, Your Expertise as an Environmental Specialist I • B.A. in Environmental Science, B.S. in Environmental Engineering, or related field., • Minimum of 2-5 years of related experience., • OSHA HAZWOPER 40-Hour with current 8-Hour OSHA HAZWOPER annual refresher., • NYSDOL-Certified Asbestos Inspector or Licensed Asbestos Air Monitor, a plus., • NYSDOL-Certified Mold Assessor, a plus., • Willing to travel and work 10+ hour field days in peak season., • Proficient in Microsoft Office, Bluebeam, PDF; experience with ArcGIS/View, Survey123 preferred., • Proven knowledge of sampling methods and environmental regulations and guide documents., • Ability to read plans and understand building systems (HVAC, insulation, products)., • Experience reading and understanding GIS mapping, contour mapping, and data driven plume mapping., • Ability to direct contractors, drillers, and other field subcontractors during field projects., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of projects, prioritize tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Committed to building trust and collaboration through integrity, respect, and active listening., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be able to lift up to 25 pounds at a time., • Ability to stand and walk for long periods of time and distance, • Must be able to travel to various project sites., • Must be able to access and navigate construction sites and job areas., • Must pass respirator medical clearance and respirator fit test., • Must be able to wear a respirator for required work, occasionally for extended periods of times., • Must be comfortable wearing project-specific level of Personal Protective Equipment (PPE) such as Tyvek suits, nitrile gloves, safety glasses, hard hat, and steel toe boots., • Must be able to work in environmental conditions including office environment, field environment, construction site environment; exposure to dust, noise, grease, smoke, fumes, gases, heat, cold, and inclement weather conditions when working in the field.

Job DescriptionDescription: Job Summary: Chief Program Officer (CPO) is a key executive responsible for overseeing and driving strategic planning, development, implementation, and evaluation of all programs. The CPO plays a pivotal role in shaping the organization’s mission and impact, ensuring that programs align with strategic objectives and deliver measurable results. As the organization’s lead of programming, the CPO also works with the operations leader to ensure strong, financial and programmatic performance of their teams. ON-RAMP is a workforce development training organization supported by CenterState CEO as part of a statewide initiative to train Central New York residents in advanced manufacturing, construction and adjacent industries. All Resumes should be submitted by Firday September 26th, 2025 Essential Job Duties and Responsibilities: (Additional duties may be assigned) Strategy: • As a member of the executive corporate team the CPO operates with an elevated level of independence, initiative, and professional expertise and is a key driver of the organization’s vision, strategy, mission, and initiatives., • Develop and execute a comprehensive program strategy that aligns with the organization’s mission and goals, fostering innovation and growth., • Interfaces between the organization’s staff and Executive Leadership Team on all strategic planning, programs, budget, and internal staffing issues., • The CPO is responsible for the development, implementation and evaluation of the organization’s programs, ensuring they align with the strategic goals and objectives, as set by the Board and CEO., • Lead the program team, including hiring, training, and performance management, to ensure a high-performing team that meets organizational standards and program goals., • Establish and maintain relationships with key stakeholders, including funders, community partners, educational partners training partners, industry partners and government agencies, to secure program support and alignment., • Develop and manage the program budget, ensuring resources are allocated efficiently and effectively to meet program objectives and financial targets., • Ensure compliance with all legal, regulatory, and ethical standards applicable to the organization’s programs, including data protection and confidentiality., • Facilitate cross-departmental collaboration to integrate program objectives with broader organizational goals and objectives, enhancing overall impact., • Lead the development and implementation of program evaluation frameworks to assess the effectiveness and impact of program activities, making data-driven decisions for continuous improvement., • Spearhead innovative program development initiatives, exploring new methodologies, technologies, or partnerships to enhance program delivery and outcomes., • Upholds the organization’s mission, vision, and values of collaboration, integrity, inclusion, agility, and accountability and ensures they are embodied and pursued throughout the entirety of the organization., • Contributes to advancing the organization’s strategic principles of business competitiveness, community prosperity, equity, sustainability, continuous improvement, customer service, talent excellence, and brand awareness., • Supports communication with the Board of Directors when necessary, regarding strategic team plans and updates. Supports the Chief Executive Officer, Board of Directors and other strategic meetings., • Assure the organization and its mission, programs, products and services are consistently presented in strong, positive, image., • Responsible for the effective operations of the Programs team., • Supports the management and coordination of human resources and financial/fiscal operations of the Program team., • Provides guidance and service to affiliate organizations., • Supports in addressing employee challenges/conflicts – interpersonal and otherwise., • Responsible for overseeing programmatic risk management and compliance., • Supports the processing and administering work of grant life cycle; reviewing applications ensuring funds are used appropriately., • Leads the organization’s programmatic budget process., • Supports programmatic grant administration, compliance and reporting., • Supports the development/maintenance of long-term financial forecast for the organization., • In collaboration with the Chief Executive Officer, develops and maintains strategic business plans, proformas, and programmatic strategies for all the organization’s programs. Manages and supervises team, including writing annual performance evaluations and ensuring staff training and professional development. Position Type and Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 8:30 am to 5:00 pm but can be flexible as agreed to by Chief Executive Officer. Travel Minimal travel is expected for this position. Minimum Required Education and Experience: Education • Bachelor’s degree required in public administration, nonprofit management, business administration, or a related field., • At least 10 years of managerial experience in progressively responsible leadership roles, with a minimum of 5 years in a senior leadership position overseeing operational and performance outcomes., • Demonstrated experience in strategic planning, leadership, and program development., • Proven track record in grant administration and compliance with government regulations relevant to program operations., • Experience leading complex projects, programs, and training initiatives., • Strong background in budget management, finance, and investment strategies., • Excellent written and verbal communication skills., • Strong analytical and decision-making abilities., • Proficiency with productivity software (e.g., Microsoft Office Suite, Google Workspace) and data analysis tools. This role requires one to be able to manage discrete information, have excellent communication, and people skills and the ability to work effectively with a diverse group of people. A high standard of professional and ethical conduct, integrity, and accountability is required. Fluency in Spanish a plus. Advanced degree a plus. Knowledge, Skills, and Abilities: • Excellent technical skills and proficiency with Word, PowerPoint, Excel, Outlook, and other software, as necessary., • Personal Effectiveness/Credibility., • Thoroughness., • Collaboration Skills., • Communication Proficiency., • Acts as a brand ambassador., • Provides staff support to ON-RAMP’s Board of Director’s and committees., • Clearly, consistently and in alignment with the corporate leadership team, communicate with staff about policies and practices, updates, major projects and developments., • Leads weekly team meetings., • Practices community engagement through partnerships, participation, and alignment with ON RAMP’s events, events of core partners and other activities., • Close mental and visual attention required to perform work, verbal communication, using a computer terminal, and/or extensive reading., • Must be able to lift and carry up to 20 pounds and push and/or pull up to 20-pound loads at a time relative to event-based equipment., • Must be able to sit for long periods of time. General office equipment is used. There is no exposure to known adverse environmental conditions. Work is performed in a typical office work environment. Disclaimer: • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee(s) occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor., • The company reserves the right to add to or revise an employee's job duties at any time at its sole discretion.

Job DescriptionTitle: Sales Engineer Location: Syracuse, NY Type: Full Time Pay: $125,000 - $155,000 Why Turtle? At Turtle, we’re redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we’ve built a reputation for innovation, excellence, and exceptional customer service—and we’re just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what’s possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that’s making waves and empowering its people to do extraordinary things every single day! About the Role Turtle & Hughes, Inc. in Syracuse, NY is actively searching for a Sales Engineer to join our team in our headquarters. The sales engineer is primarily responsible for quoting, selling, closing and managing small and medium sized projects in the Upstate New York marketplace and an integral part of the T&H Power Distribution team. What You'll Do • Responsible for quoting, selling and managing small – mid sized power distribution projects., • Must be proficient in reading blueprints and working with electronic bid software., • Must be highly organized and efficient to multitask projects from bid stage to closeout., • Maintain project schedule and deadlines and manage customer expectations., • Accountability for timely completion and profitability of projects., • Responsible for increasing the profit margin of a project through efficient take-off, sourcing and managing., • Manages and coordinates with all parties involved in the projects, both internal and external., • Follows established standards and procedures for project reporting, communication, and documentation., • Keeps detailed records on pricing quotes, change orders and all correspondence both internally and externally., • Keeps the companies best interests in mind while performing job., • Bachelors degree preferred., • Experience working directly with customers or electrical contractors., • Knowledge of project sales techniques and tools., • Proven experience in people management. We offer a competitive benefits package. Some of which include: • 401 (k) plan, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Paid Holidays, • Vacation Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation’s largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated division provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. What To Do Next You can begin by filling out our application online. If you want to learn more about Turtle, please visit our website or our social medias! LinkedIn: @Turtle Instagram: @TurtleandHughes Facebook: @Turtle and Hughes Twitter: @turtleandhughes Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Job Description Career Educator Reports to: Director of Education Location: 113 E Willow St, Syracuse NY (60%) / Remote office or local schools (40%) Full-Time: Primarily Monday-Friday 9am-5pm (occasional nights and weekends based on client need) Non-Exempt: $20.00-$21.00/hour DOE About Us LAUNCH has been proudly serving the greater Onondaga County area for 40 years. Offering individualized services that foster learning, independence, and growth -- guided by the principle that learning is unique for each individual and occurs in all spheres of life. We serve and support anyone who seeks guidance in learning. This can include children, adults, families, parents, and caregivers from all backgrounds as well as learning styles. About the Role We are looking for a proactive employee to provide instruction for LAUNCH’s Pre Employment Transition services that guide and encourage learner development in specific course objectives under the ACCES-VR contract. Responsibilities include: • Planning, preparing, and delivering lesson plans and instructional materials that facilitate active learning, • Creating and developing curriculum, • Addressing the individual needs of each learner by providing differentiated instruction, • Create a learning environment that is conductive to learning and appropriate to the maturity and interests of adult learners Education & Experience Bachelor’s degree plus two years’ experience of vocational services and working with individuals with a disability, required. Enrollment in a master’s program or current MBA degree, preferred. Knowledge, Skills & Abilities Required skills include: active listening and effective speaking, time management, critical thinking, basic technology/e-mail, reading comprehension, effective written and verbal expression. Conditions of Employment Must possess a valid NYS driver’s license and transportation necessary to meet program needs.

Job DescriptionDescription: Paylocity is an award-winning provider of cloud-based HR and payroll software solutions, offering the most complete platform for the modern workforce. The company has become one of the fastest-growing HCM software providers worldwide by offering an intuitive, easy-to-use product suite that helps businesses automate and streamline HR and payroll processes, attract and retain talent, and build a strong workplace culture. While traditional HR and payroll providers automate basic HR processes such as payroll and benefits administration, Paylocity goes further by developing tools that HR and businesses need to compete for talent and deliver against the expectations of the modern workforce. We give our employees what they need to succeed, including great benefits and perks! We offer medical, dental, vision, life, disability, and a 401(k) match, as well as perks that support you, your family, and your finances. And if it’s career development you desire, we provide that, too! At Paylocity, people matter most and have always been at the heart of our business. As part of the Sales & Marketing team, you’ll help us solve challenges and succeed as you grow and understand the unique needs of our clients and tailor easy-to-use solutions to deliver the performance they need. With a position in Sales & Marketing, you’ll strengthen our relationships with clients, anticipate their needs, and think outside the box to unlock new possibilities. Fully Remote (U.S. Only): This is a fully remote position, allowing you to work from home or location of record within the U.S. with no in-office requirements. You must be available five days per week during designated work hours. The work arrangement for this role is subject to change based on business needs and individual performance. This may include adjustments to on-site requirements or schedule expectations, as necessary. Position Overview This role is responsible for prospecting and developing business sales relationships with potential clients and closing new and expanded sales agreements. This role at Paylocity works in a fast paced business environment that is very competitive and quota-driven, and targets medium-sized businesses (49-499 employees). This role requires a proactive approach to identifying and pursuing new business opportunities, with a strong emphasis on independently generating activity in the field. Success is supported by a consultative sales approach, effective prospecting techniques, persistence throughout the sales cycle, and a solid understanding of the value and impact of the solution being offered. Location Remote office residing within a Syracuse territory Reports To Director of Sales Responsibilities The below represents the primary duties of the position, others may be assigned as needed. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Ability to generate net-new business opportunities, leveraging the company’s expertise, industry profile, and knowledge of the industry, • Schedule and present Paylocity services with prospective clients, • Prepare and present proposals and provide appropriate follow-up throughout the sales process., • Organize, complete and obtain documentation required for clients to move to Paylocity system, • Work directly with internal departments to ensure smooth transition for client, • Using initiative, develop prospects through telemarketing, referrals, professional and personal contacts and other sources, • Build and maintain relationships within the Broker channel as well as other referral sources, • Maintain contact with existing customers to determine needs for additional services, • Attend trade shows, conferences and other events to promote Paylocity services, • Meet or exceed quarterly and annual sales quota for your territory, • HS diploma or equivalent required. College degree strongly desired, • 3-5 years’ experience in a sales position, • Ability to succeed in a competitive environment, • Ability to maintain high activity standards, • Proven track record of sales success, • Critical thinking and decision-making skills required in order to handle objections and unexpected situations that may arise throughout the sales cycle, • Customer service orientation, • Strong presentation skills, • Strong written and oral communication skills, • Strong organizational and time management skills, • Mobility required for sitting, standing and walking, • Mobility required for driving to prospective client sites, • Manual/finger dexterity required in both hands to operate computer keyboard and manipulate small objects, • Sensory ability required to see, hear and touch, • Mental effort required for reading, writing, visualization, calculation and analysis We comply with federal and state disability laws and make reasonable accommodations for applicants and employees with disabilities. To request reasonable accommodation in the job application or interview process, please contact . This email address is exclusively designated for such requests, aligning with federal and state disability laws. Please do not send resumes to this email address, as they will be removed. The pay range for this position is $57,900 - $107,500 /yr ; however, base pay offered may vary depending on job-related knowledge, skills, and experience. This position is eligible for our variable commission plan, annual bonus, and restricted stock until grant based on individual performance in addition to a full range of benefits outlined here. This information is provided per the relevant state and local pay transparency laws for the location in which this position will be performed. Base pay information is based on market location. Applicants should apply via . Requirements:

Job DescriptionDescription: Hardscape Crew Lead – Heavy Equipment Specialist (ICPI Certified) Location: Central New York (CNY Area) Job Type: Full-Time About J and R Property Services At J and R Property Services, we are redefining excellence in property maintenance and construction throughout Central New York. Guided by innovation, teamwork, and an unwavering commitment to quality, we transform outdoor spaces into lasting works of craftsmanship. As we continue to expand our hardscape and construction division, we are seeking a talented and motivated Hardscape Crew Lead to elevate our projects and inspire our team. Key Responsibilities • Lead and manage a hardscape crew on residential and commercial projects, ensuring a culture of safety, quality, and accountability., • Operate and oversee the safe and efficient use of heavy equipment (excavators, skid steers, loaders, etc.)., • Read, interpret, and execute site plans, layouts, and grade elevations with precision., • Ensure all installations meet or exceed ICPI and NCMA standards., • Mentor and train team members in advanced hardscape techniques and equipment operation., • Coordinate with project managers to deliver projects on time and within budget.Requirements:, • Experience: Minimum 5 years in hardscape and construction, with at least 2 years in a leadership role., • Certifications: ICPI Certification required; NCMA Certification preferred., • Licensing: Valid driver’s license (CDL preferred)., • Advanced knowledge of hardscape equipment and products, including operation, maintenance, and application across diverse projects., • Proficient in reading and executing detailed construction plans., • Expertise in heavy equipment operation, troubleshooting, and safety protocols., • Strong leadership, communication, and problem-solving skills with a team-focused mindset.

Job Description Responsible for work in the maintenance and repair of vehicles and heavy equipment used in fleet operations. Driver's license is required. 2-3 years of mechanical experience is required. Hydraulics experience is preferred. Experience with repairing specialty equipment such as Jarraffs is preferred. You will be responsible for troubleshooting issues and fixing them, aiming for maximum reliability and functionality as well as helping around the yard and driving a truck half of the time. This position requires you to work at the shop and in the field locally as needed. The Ideal candidate will have their own tools. Essential Job Functions: • Inspects parts for accuracy and condition; assists in the maintenance and security of parts storage facilities., • Assists with the collection and inspection of fire extinguishers., • Perform inspections and repairs in the field., • Maintains records of work performed and materials used. Education and Experience: High School diploma/GED; AND successful completion of an accredited program in vehicle repair and maintenance; AND two (2) years of experience in the repair of vehicles and heavy equipment; OR an equivalent combination of education, training and experience. Required Knowledge and Skills: • Safe work methods and safety regulations pertaining to the work., • Shop mathematics., • Record keeping practices., • Computer applications related to the work., • Communicating effectively in oral and written forms., • Techniques for dealing with a variety of individuals from various socioeconomic, ethnic and cultural backgrounds, in person and over the telephone. Skill in: • Diagnosing and repairing a wide variety of vehicles and equipment., • Using hand and power tools skillfully and safely., • Preparing records and reports of work performed., • Reading and interpreting manuals, specifications and drawings., • Understanding and following oral and written directions., • Estimating necessary materials and equipment to complete assignments., • Using initiative and independent judgment within established procedural guidelines. Required certificates and licenses: Continued employment is contingent upon the following required licenses being maintained in active status without suspension or revocation. • Only a Driver’s License is required., • CDL preferred. PHYSICAL DEMANDS & WORKING ENVIRONMENT: The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionDescription: The role of the K-12 Special Education Coordinator is to facilitate collaboration among teachers, school leaders, students' home districts, and families to develop and implement specialized services for children with exceptional needs. This involves both short-term and long-term planning to ensure the provision of appropriate support. Additionally, the coordinator is responsible for ensuring compliance with established policies, procedures, and regulations related to special education, thereby maintaining the district's Special Education services. The Special Education Coordinator will oversee various aspects of the curriculum and instructional resources, work towards aligning educational materials with state curriculum guidelines and strive to enhance the efficiency of the existing personnel. The coordinator will actively participate in training the teaching staff, facilitating the development of a Response to Intervention (RTI) process, and making valuable contributions to the creation of Individualized Education Service Plans (IEPs) and 504 plans. Responsibilities Roles and responsibilities may change. Additional responsibilities may be assigned throughout the course of the school year. • The successful candidate will serve as a liaison to the home districts and understands the Multi-Tiered Systems of Support (MTSS) process in order to meet the needs of the special education students; collaborate and plan tier 1, 2, and 3 interventions as part of the RTI process; track students’ progress towards goals with integrated progress monitoring tools as part of the MTSS process., • The successful candidate will review intake assessments to ensure quality and compliance, and that all students receive the educational services and instructional methods that they need to succeed aligned with Individualized Education Plans (IEPs) and 504 plans., • The successful candidate will coordinate and collaborate with Special Education teams and building leaders in regards to caseloads, schedules, Special Education transportation needs, and the Special Education state assessment processes., • The successful candidate will oversee the Special Education teams; special education eligibility and re-evaluation processes; coordinate all related services for special education placement; participate in the development of all Behavioral Intervention Plans (BIP) and Functional Behavioral Assessments (FBA); oversee IEPs, and pre-referral meetings (RTI); address behavioral strategies for special education students., • The successful candidate will participate and facilitate Manifestation Determination Review (MDR); oversee student records regarding special education issues and prepare reports for regulatory agencies while also ensuring compliance with all City, State, and Federal Special Education laws and regulations., • The successful candidate will coordinate 504 services; coordinate the RTI process within the SANY district; coordinate with Child Find referral activities; assist with the out of school placement and services; foster parental participation in the Special Education process., • The successful candidate will manage the timely submission of reports, records, and inventories; direct the delivery and continuous improvement of Special Education programs; uphold board policies and follow administrative guidelines and procedures; build community/school partnerships that enhance the Special Education operational effectiveness; maintain open and effective communications with Special Education team and Building leaders., • The successful candidate will supervise enrollment and withdrawal procedures for Special Education students; oversee proficiency and alternative testing programs; analyze test results; provide staff direction for instructional modifications and interventions that enhance student learning and improve test performance as needed; assist with the collection of educational management information and student data (e.g.,Rediker ) as directed., • The successful candidate will be responsible for trainings and assist the Special Education teams with best practice instructional strategies; conduct observations for students and staff; assist with staff and paraprofessional evaluations giving input to administrative teams; ensures procedural safeguards are met; provide training for staff regarding Special Education processes and classroom instructional practices; promote the effective use of available technology in records management and instructional activities; uphold computer technology acceptable use policies; respects staff privacy and maintain the confidentiality of privileged information., • The successful candidate will supervise the delivery of a continuance of Special Education services (e.g., student records, testing, Speech/Language Pathology, Physical and Occupational Therapy, orientation/mobility, visual/hearing, special needs transportation, transition, 504s, RTI process, etc.); keep current with the K-12 courses of study, scope and sequence framework, and state standards/guidelines; comply with state model policies and procedures for the education of students identified as having a disability; monitor education laws, rules, and regulations; develop and/or update administrative guidelines and procedures to comply with legal mandates., • The successful candidate will promote the continuity of the instructional program; provide insights about the progression of student skills and key contributions made by staff at each level; encourage Special Education teams to develop and disseminate innovative program materials; coordinate the transition process for special education students entering or leaving the program; help staff resolve problems that impede student learning and/or participation in appropriate peer group activities., • The successful candidate will serve as a liaison and information resource for our Special Education teams; support a full range of educational options; coordinate placement procedures; participate in parent conferences as necessary; ensure that services are provided in the least restrictive educational environment; promote staff knowledge and use of appropriate assistive technology; oversee monitoring procedures to ensure that assistive devices operate properly; provide guidance, communicate high expectations, and show an active interest in student progress., • The successful candidate will participate in hearing/grievance processes; monitor Special Education student graduation requirements; help Special Education teams and Building leaders with discipline and pupil management issues with Special Education students; maintain effective relationships with community services (e.g., court systems, law enforcement, health care facilities, child welfare services, etc.). The following characteristics and physical skills are essential for the successful performance of assigned duties. • Takes precautions to ensure staff/student safety. Watches for behavior that may indicate a problem. Works with staff to eliminate unacceptable behavior., • Reports evidence of suspected child abuse and neglect as required by law. Encourages and supports partner school activities as time permits., • Supports appropriate research and pilot projects. Identifies and recommends funding opportunities. Helps prepare grant and foundation proposals., • Participates in professional growth opportunities. Accepts personal responsibility for decisions and conduct. Wears appropriate work attire and maintains a professional demeanor. Strives to develop rapport and serves as a positive role model for others. Performs other specific job-related duties as assigned., • Articulates a clear vision and provides leadership to advance the change process. Promotes a positive work environment and engenders staff enthusiasm. Skillfully manages individual, group, and organizational interactions. Addresses problem situations and intervenes to resolve conflicts., • Interprets information accurately and initiates effective responses. Effectively uses listening, observation, reading, verbal, nonverbal, and writing skills. Organizes tasks and manages time effectively., • Bachelor’s degree required; Master's degree preferred, • Experience in leadership, • NYS Students with Disabilities or SPED certification required, • Experience with diverse population of students or in an urban setting a plus Equal Opportunity Employer Science Academies of New York is committed to maintaining a working and learning environment free from discrimination on the basis of race, color, religion, national origin, pregnancy, gender identity, sexual orientation, marital/civil union status, ancestry, place of birth, age, citizenship status, veteran status, political affiliation, genetic information or disability, as defined and required by state and federal laws. Additionally, we prohibit retaliation against individuals who oppose such discrimination and harassment or those who participate in an equal opportunity investigation. Requirements:

Job Description Do you have experience as a PLC Master Technician and looking for an amazing career? Affinity Recruiting is looking for a PLC Master Technician for an amazing company near Syracuse, NY. Ideal candidate will have experience trouble shooting Allen Bradley PLC’s, Micro Logic, SLC and Control Logix to be considered. Also, ideal candidate must be willing to work weekends and overtime as needed. Candidate requirements: * Must know how to install and maintain high speed industrial equipment. * Able to troubleshoot, repair all electrical defects of the equipment and make adjustments where it is needed. * Must perform preventative maintenance on the industrial equipment, on electrical equipment, transducers, solid state circuits, inspection of the equipment and understand complex timing and inspect all devices. * Able to install by reading design prints and instructions. * Able to diagnose and troubleshoot on the PLC and standard ladder diagrams. If you have this experience, we would love to hear from you! Please apply to this posting and a recruiter will reach out to you as soon as possible!

Job Description Overview At Community Financial System, Inc. (CFSI), we are dedicated to providing our customers with friendly, personalized, high-quality financial services and products. Our retail division, Community Bank, N.A., operates more than 200 customer facilities across Upstate New York, Northeastern Pennsylvania, Vermont and Western Massachusetts. Beyond retail banking, we also offer commercial banking, wealth management, investment management, insurance and risk management, and benefit plan administration. Just as our employees are committed to helping our customers manage their finances, we’re committed to our employees. After all, they make it happen for our customers every day. To ensure our people can enjoy long and successful careers here at CFSI, we offer competitive compensation, great benefits, and professional development and advancement opportunities. As an equal-opportunity workplace and affirmative-action employer, we celebrate and support a diverse workplace for the benefit of all: our employees, customers and communities. Responsibilities A Commercial Banking Officer will perform a variety of duties to meet the commercial service needs of business customers and will include some lending authority. This position requires an employee able to develop new business relationships with prospective customers and maintain continuous business relationships with present customers. A valid drivers license is required. • Solicit new business from present and prospective customers, • Maintain ongoing business relationships with present customers in order to take advantage of additional cross-selling opportunities, • Provide sales information on a timely basis in order that this information may be included as part of customer service and sales performance reports, • Monitor individual sales performance versus objectives on a regular basis and discuss performance with appropriate supervisor on a frequent basis, • Serve as a member of the Bank's sales team (e.g., Branch Manager) and make group sales calls where these types of calls will improve the opportunity for new business development, • Maintain a thorough knowledge of the features and benefits of all bank commercial products and services in order to ascertain customer needs and to sell in conjunction with these needs, • Provide direct service to commercial customers of the bank with respect to deposit, loan, and other miscellaneous products and services, • Approve or reject loan applications within individual lending authority, • Assist customers in obtaining specialized services from other bank departments as necessary and provide help to customers with specific inquiries or service problems, • Maintain a working knowledge of bank operating policies and procedures which impact commercial services, • Prepare and maintain accurate records of all customer service calls and meetings made with present and prospective customers, • Provide quality service to internal and external customers, • Demonstrate cooperative efforts in working with other departments and within own department, • Jointly establish annual quantitative customer service and sales objectives with assigned supervisor; this activity to be integrated with the Commercial Lending Department's annual operating plan, • Comply with established operating policies and procedures in order to maintain adequate controls and to support the Bank's adherence to outside regulatory requirements, • Communicate with management and staff personnel in order to integrate goals and activities, • Respond to inquiries relating to his/her particular area, or to requests from other bank personnel, customers, etc., within given time frames and within established policy, • Maintain appropriate records and provide assigned reports., • Monitor and review accounts for appropriate risk rating to avoid risk rating changes by loan review, the Office of Comptroller of Currency (OCC) and other loan review processes., • Provide guidance, on-the-job training and technical assistance to Commercial Loan Officers 1(s) and 2(s), • Maintain proficient knowledge of, and demonstrate ongoing compliance with all laws and regulations applicable to this position, ensure ongoing adherence to pertinent policies, procedures, and internal controls, and meet all job-specific training requirements in a timely fashion., • Perform other related duties as assigned or directed Qualifications • Minimum five (5) years experience in related positions., • B.S. or B.A. Degree in a related field preferred, • Specialized banking education and training, • A valid drivers license is required., • Proficient reading, writing, grammar and mathematic skills, • Proficient interpersonal relationship, communication and sales skills, • Thorough knowledge of the features and benefits of all bank commercial products and services, • Working knowledge of bank operating policies and procedures which impact commercial services, • All applicants must be 18 years of age or older.

Job Description Overview At Community Financial System, Inc. (CFSI), we are dedicated to providing our customers with friendly, personalized, high-quality financial services and products. Our retail division, Community Bank, N.A., operates more than 200 customer facilities across Upstate New York, Northeastern Pennsylvania, Vermont and Western Massachusetts. Beyond retail banking, we also offer commercial banking, wealth management, investment management, insurance and risk management, and benefit plan administration. Just as our employees are committed to helping our customers manage their finances, we’re committed to our employees. After all, they make it happen for our customers every day. To ensure our people can enjoy long and successful careers here at CFSI, we offer competitive compensation, great benefits, and professional development and advancement opportunities. As an equal-opportunity workplace and affirmative-action employer, we celebrate and support a diverse workplace for the benefit of all: our employees, customers and communities. Responsibilities • Input wires as requested from appropriate Bank personnel., • Verify and release the outgoing wires., • Balance daily wire activity., • Answer all branch wire-transfer related questions and external inquiries., • Assist with various clerical functions as needed in the Accounting Department. Maintain proficient knowledge of, and demonstrate ongoing compliance with all laws and regulations applicable to this position, ensure ongoing adherence to policies, procedures, and internal controls, and meet all training requirements in a timely manner. Qualifications Education: A.A.S. degree in Accounting, Business or Finance, or equivalent Accounting/Wire Room experience preferred. Skills: Proficient reading, writing, grammar, and mathematics skills; strong computer skills, including Word, Excel, and database management; strong interpersonal relations and communication skills. Experience: Minimum of two (2) years in the Accounting Department of an organization or Banking or wire transfer experience. All applicants must be 18 years of age or older.

Job DescriptionSalary: $30-$45 Join One of New York's Top Commercial General Contractors! Gregor Industriesis a leader in commercial construction, known for delivering high-quality projects with a commitment to excellence and innovation. Were seeking a driven and experiencedSite Superintendentto be a part of our growing team of industry professionals. *THIS POSITION REQUIRES TRAVEL TO EACH JOB SITE, AND IS NOT AN OFFICE POSITION Requirements: • Minimum 2+ years experience in Commercial construction in a Supervisory role., • Excellent leadership skills., • AVAILABLE TO WORK NIGHTS AND WEEKENDS., • Ability to travel to various job sites, vehicle or reliable transportation required., • Job sites vary in the Syracuse Area., • A background in carpentry is a plus., • Site Supervising Experience 2+ years required., • Experience and knowledge of reading & interpreting Blueprints., • Excellent communication required, ie: send emails, document RFI's, take photos, take videos. License/Certifications: • Driver's License (Required)., • OSHA 30 (Required)., • Willingness to travel., • SST 62 Proffered., • DOB Proffered. Responsibilities: • Maintain a managerial presence on job sites from the start of the day to the end., • Be able to manage multiple trades on the job site., • Prepare and adhere to an effective schedule for all construction plans., • Analyze and ensure compliance with all construction contract schedules., • Coordinate with subcontractors and consultants., • Supervise the efficient working of all project staff and ensure compliance with all design specifications., • Coordinate with company personnel and clients to resolve all project issues and provide a response to all requests., • Design and implement strategies for contractors., • Develop estimates for all change orders and perform regular tests on all construction activities., • Supervise efficient working of all construction specifications and ensure compliance with all record drawings., • Collaborate with the design team to ensure the accuracy of all documents and maintain cost control on all projects while maintaining quality at all times., • Administer efficient working of all field staff and participate in all meetings with contracts to evaluate progress on a regular basis., • Develop and implement all project control tools and prepare an effective cost report for all construction projects., • Maintain accuracy of data and safety systems., • Handle site management of health and safety programs., • Ensure training of employees, visitors, and contractors in job hazards and safety practices., • Develop and enable employee Safety Training Programs., • Handle material safety data sheets current listing for controlled products on plant site. Job Details: • Full Time., • Night Shifts (not overnight)., • Weekday & Weekend availability., • Overtime., • Medical/Dental/Vision/Pet Insurance: Eligible after 60 days., • Opportunity for promotions in this position.

Job DescriptionJob Title: Material Handler Job Description We are seeking a dedicated Material Handler to join our team. The ideal candidate will possess the skills to efficiently manage materials within our facility, ensuring seamless operations and inventory accuracy. Responsibilities • Safely move materials throughout the facility to support operations., • Use the ERP system, SAP, to electronically track material movements with 100% accuracy., • Execute cycle counts as directed to ensure inventory accuracy., • Pull materials in a timely manner to support manufacturing and support services based on visual indicators and actual orders., • Manage warehouse and replenish Kanban material as needed., • Supply required materials to line operators according to the production schedule., • Maintain communication with other departments to facilitate product storage and handoffs., • Maintain traceability of all products and strive for 100% inventory accuracy., • Operate hand jacks and forklifts safely to move materials., • Adhere to all safety rules, especially those related to lifting and forklift use., • Follow Q&EMS policies, procedures, and instructions., • Assist in minimizing environmental impact and preventing pollution through recycling efforts and proper chemical management., • Identify opportunities to reduce costs for the company or customers., • Move and/or stage materials in the warehouse to support production demand., • Work with Planning/Purchasing to expedite materials from incoming trucks and QC processing.Essential Skills, • At least 6 months of warehouse experience., • Minimum of 6 months of forklift experience., • Proficiency in reading, writing, and speaking English., • Ability to lift between 40-50 lbs., • Experience in material handling, operating electric pallet jacks, picking, and loading.Additional Skills & Qualifications, • High School Diploma or GED., • Strong work ethic and positive attitude., • Analytical mindset and proficiency in computer use., • Experience with ERP software, inventory management, cycle counts, and receipt transactions., • Training and certifications in forklift and turret truck operation., • Ability to work well in a team environment., • Ability to stand, walk, lift, and bend for extended periods.Why Work Here? Join a family-owned and operated company that offers room for growth, as demonstrated by our supervisors and leads who started as temps. We have contracts with every NFL team except the Dallas Cowboys, providing a dynamic and exciting environment. Enjoy comprehensive benefits, including medical and dental insurance, 401k with company match, two weeks of vacation per year, and opportunities for advancement. Work Environment Our facility is temperature-controlled, providing a comfortable work environment. The role requires working the first shift from Monday to Thursday, 5 am to 4 pm. As part of our innovative team, you will be part of a company known for its cutting-edge wireless networking solutions, including the first fully virtualized Radio Access Network (RAN) and indoor 5G millimeter wave radio in the U.S. Job Type & Location This is a Contract to Hire position based out of Liverpool, New York. Pay and Benefits The pay range for this position is $17.00 - $19.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Liverpool,NY. Application Deadline This position is anticipated to close on Sep 17, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDescription: Greenpoint is an Independent and Assisted Senior Living community located in Liverpool, NY. The ideal candidate for our cook position will prepare high-quality, made-to-order meals for over 150 residents, ensuring safety, nutrition and satisfaction in every dish all in compliance with NYS Department of Health regulatory requirements. This position is critical in supporting the overall health and well-being of our residents. Part-time positions available! Requirements: Moderate reading, writing, grammar, and mathematics skills; proficient interpersonal relations and communicative skills; auditory and visual skills; ability to bend, stoop, sit, stand, reach, and lift items weighing 50 pounds or less; satisfactory completion of post-offer, pre-employment physical as required.

Job Description Location: G.M. Crisalli & Associates, Inc., Syracuse, NY Responsibilities: Primary responsibility for this position will be creating and managing information and administrative documentations on both the cost and income sides assisting with AP/AR processing and various administrative duties for multiple projects at a time. Reports To: General Summary of Duties: The Office Administrator is responsible for all logging, tracking, disbursing, and managing all information while working with other departments to ensure administrative organization, efficiency, and customer satisfaction. Travel: • Review and process sub billing, • Full charge bookkeeping, • Run and prepare reports for PM staff & President., • Assist with RFI’s submitting, tracking and logging., • Coordinate writing and processing of contracts, purchase orders, change orders., • Communicate daily with site superintendents and project managers., • Track job progress and paperwork, status of orders and client change orders, • Maintain project files and paperwork., • Develop & maintain working relationships with clients, consultants, and other customers., • Organize, plan & prioritize workload., • Communicating with supervisors and peers., • Problem resolution., • Work collaboratively with other departments. Minimum Job Qualifications: • Solid employment history, • Can demonstrate successful Full charge bookkeeping experience, • Microsoft Office Suite experience: Outlook, Excel, Word, PowerPoint (Advanced experience with spreadsheets & reports), • Timberline accounting software experience (strongly recommended) and/or Sage intacct, • Deadline & detail oriented., • Excellent verbal & written communication skills, • Strong accounting/bookkeeping/math skills, • Uses personal computer approximately 4-5 hours per day., • Uses telephone and email to communicate with consultants, contractors, and coworkers, approximately 5-6 hours per day., • Work is performed in an office setting where there is no substantial exposure to adverse environmental conditions.Company DescriptionEstablished Commercial Construction Company serving clients in the Northeastern, Midwestern and Mid-Atlantic United States. Located in Central New York for 34 years. Our company mission is to serve our clients with excellence. Building High Quality, Environmentally responsible, Socially conscientious projects on Budget and on Time.Established Commercial Construction Company serving clients in the Northeastern, Midwestern and Mid-Atlantic United States. Located in Central New York for 34 years. Our company mission is to serve our clients with excellence. Building High Quality, Environmentally responsible, Socially conscientious projects on Budget and on Time.

Job Description Boiler Operator Manufacturing Plant Location: Syracuse, NY Industry: Manufacturing & Production Job Category: Skilled Trades / Maintenance Compensation: $70,761 annually ($34.02/hr) Job Type: Full-Time, 1st Shift (6:00am2:30pm) About the Opportunity Eatons ES GEIS CHD division is hiring a Boiler Operator to join its Syracuse-based team. In this critical maintenance role, you'll operate and maintain complex powerhouse systems including high-pressure boilers, steam stations, and compressed air systems. This is a strong opportunity for someone with hands-on experience in industrial facilities, especially those who enjoy troubleshooting mechanical and electrical components. What Youll Do Operate, install, and repair high-pressure steam boilers, air compressors, and associated equipment Perform mechanical and electrical maintenance on pumps, motors, and power generation systems Troubleshoot both analog and digital control systems Conduct chemical tests to ensure boiler performance and safety Read and interpret electrical/plumbing diagrams and mechanical blueprints Use hand tools, pipe fitting equipment, torches, and soldering tools as required Maintain energy management systems, including time schedule entry and updates Repair and replace piping systems carrying steam, water, gas, compressed air, and oil What You Bring 3+ years of experience with steam boilers, air compressors, motors, pumps, electrical equipment, and pressurized piping Proficiency in reading schematics and mechanical blueprints U.S. work authorization required Preferred: Experience in manufacturing or industrial environments 5+ years in a powerhouse technician role Mechanical troubleshooting and equipment repair skills Whats Offered 401(k) with employer contribution Day-one Medical, Dental, and Vision coverage Paid Time Off Vacation and Holidays Employee Assistance Program Want to Stand Out? We invite candidates to record a short video introduction. This should feel low-pressure and personaljust a chance to tell us more about you. Submit your video here

Job DescriptionWe are currently seeking 2 Maintenance Repair Technicians (CNC) - 2nd Shift. This position is based at our client Syracuse, New York facility with core hours of 2:30pm to 11:00pm.& & The hourly rate for this position is $34.86 per hour.& & Must have three years of manufacturing maintenance or related degree and one year Must have experience with ladder logic circuit diagrams Must have experience with CNC maintenance& What you’ll do: • Tear down, determine extent of troubles, repair damaged electrical or mechanical mechanism or replace worn or defective parts and reassemble following standard and prescribed safety regulations., • Need a basic understanding of PLC logic, • Adjust equipment to required specification and check to assure effective operation.&, • Check sequence of machine cycle, determine type of machine malfunction, make all necessary repairs applying machine repair theory along with electrical theory., • Perform electrical test operations.&, • Work from complex schematic diagrams, manuals and testing procedures.&, • Troubleshoot all defective printed circuit assembly boards.&, • Perform similar or associated electrical or mechanical duties as directed., • Detect and report all unusual cases to proper supervision.&, • Use of judgment to comply with instructions or prescribed routines and to make decisionsRequired (Basic) Qualifications:, • Must have a high school diploma or equivalent from an accredited institution, • Journeymen or three (3) years of manufacturing maintenance experience in an industrial electrical/mechanical trade, • Experience with ladder logic circuit diagrams, industrial motor control schematics, and blueprint reading., • Authorized to work in the United States without Company sponsorship.& Preferred qualifications:&, • CNC Maintenance experience, • Background in machining and electrical equipment, • Two-year degree in electronics with mechanical experience/Military electronics experience., • Experience with hydraulics&

Job Description Maintenance Repair Technician (CNC) 2nd Shift Location: Syracuse, NY Industry: Manufacturing & Production Job Category: Manufacturing - Production Compensation Range: $72,508 Job Type: Full-Time About the Opportunity: Join a leading manufacturer in the electrical and power management industry as a CNC-focused Maintenance Repair Technician on 2nd shift. This is a hands-on opportunity at a high-tech facility in Syracuse, where you'll apply both mechanical and electrical expertise to maintain and troubleshoot advanced CNC equipment. Ideal for mechanically inclined professionals with a background in industrial maintenance and machining. What Youll Do: • Diagnose and repair complex mechanical and electrical issues on CNC and industrial machinery., • Tear down, inspect, and rebuild machines following safety and operational standards., • Troubleshoot electrical systems using ladder logic, schematics, and testing procedures., • Conduct electrical test operations and make necessary adjustments for performance., • Perform preventive and corrective maintenance across various production equipment., • Interpret complex blueprints, manuals, and circuit diagrams., • Communicate abnormal equipment conditions to supervisors., • Support production continuity by ensuring minimal machine downtime., • Use sound judgment when working from instructions, procedures, or schematics., • Work from 2:30 PM to 11:00 PM, Monday through Friday. What You Bring: • High school diploma or equivalent required, • Minimum of 3 years manufacturing maintenance experience, • (or 1 year with a relevant technical degree or military background), • Proficiency in reading ladder logic and industrial motor control schematics, • CNC maintenance and troubleshooting experience required, • Background in machining and electrical systems strongly preferred, • Experience with hydraulics is a plus, • Strong problem-solving skills and ability to work independently Whats Offered: • Base salary: $72,508, • Full benefits package, • Relocation assistance available, • Interview travel reimbursement, • Stable 2nd shift schedule, • Opportunity to work with cutting-edge manufacturing technology Want to Stand Out? We invite candidates to record a short video to showcase who they are. This should feel low-pressure and personal. Video submission link:

Job DescriptionWhat you’ll do: • Tear down, determine extent of troubles, repair damaged electrical or mechanical mechanism or replace worn or defective parts and reassemble following standard and prescribed safety regulations., • Need a basic understanding of PLC logic, • Adjust equipment to required specification and check to assure effective operation., • Check sequence of machine cycle, determine type of machine malfunction, make all necessary repairs applying machine repair theory along with electrical theory., • Perform electrical test operations., • Work from complex schematic diagrams, manuals and testing procedures., • Troubleshoot all defective printed circuit assembly boards., • Perform similar or associated electrical or mechanical duties as directed., • Detect and report all unusual cases to proper supervision., • Use of judgment to comply with instructions or prescribed routines and to make decisionsRequired (Basic) Qualifications:, • Must have a high school diploma or equivalent from an accredited institution, • Journeymen or three (3) years of manufacturing maintenance experience in an industrial electrical/mechanical trade, • Experience with ladder logic circuit diagrams, industrial motor control schematics, and blueprint reading., • Authorized to work in the United States without Company sponsorship. Preferred qualifications:, • CNC Maintenance experience, • Background in machining and electrical equipment, • Two-year degree in electronics with mechanical experience/Military electronics experience., • Experience with hydraulics

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. Responsible for performing breakdown and preventative maintenance on production and supporting equipment. $5,000 SIGN-ON BONUS Current Openings • Carry out tasks issued by maintenance shift supervisor., • Troubleshoot support system problems using basic problem solving skills., • Perform preventative maintenance tasks on equipment assigned to you., • Complete all standard work orders and preventative maintenance tasks assigned. Submit all completed paperwork., • Record information in required logbooks for systems history and continuous improvement., • Record any parts/components used for repairs to ensure replenishment of On-Hand balances are maintained, and properly dispose of used parts/components., • Ensure quality standards set by the company are adhered to after PM’s and/or repairs are made to equipment., • Perform machine repairs based upon a maintenance call or an assignment in a timely fashion., • Maintain cleanliness of the areas you are working in; properly dispose the parts/components you have replaced., • Promote a safe and harmonious work environment with adherence to company policy, procedures, safety and health regulations., • Maintain compliance with S.Q.F. Certification., • Minimum of a GED or High School Diploma Must be a minimum of 18 years of age • Technical training or electrical/mechanical technician degree, or verifiable comparable experience, • Food manufacturing background is a plus, • Must be able to operate forklifts and pallet jacks (electric/manual), • Experience with programmable logic controller, instruments and controls is preferred, • Knowledge of how your assigned equipment operates, • Basic knowledge & troubleshooting skills in mechanics. Experience with; plumbing, pumps, seals & gaskets, drive systems (gear, belt, and chain), bearings & bushings, fastener thread designations & properties of lubricants., • Basic knowledge & troubleshooting skills in pneumatics. Experience with; basic understanding of how pneumatics work, knowledge of the function and type of control components., • Basic knowledge & troubleshooting skills in hydraulics. Experience with; basic understanding of how hydraulics work, knowledge of the function and type of control components, read and understand basic hydraulic prints., • Knowledge of general computer functions such as Microsoft Office programs, spreadsheets, etc., • Knowledge of basic safety regulations, • Skill in multi-tasking, • Skill in basic problem solving, • Skill with basic math procedures, • Skill in team-building, • Skill in interpersonal and communication, • Possess good mechanical aptitude to disassemble and assemble all types of equipment, • Ability to communicate with co-workers, management team members, and other individuals in a courteous and professional manner, • Ability to climb ladders, stairs or use a scissor lift to inspect and/or repair equipment., • Ability to work in a fast paced environment, • Ability to pay close attention to detail and coordinate various activities simultaneously, • Seeing: Must be able to read reports and use computer, • Hearing: Must be able to hear well enough to communicate with coworkers, • Standing/Walking/Mobility: Must be able to stand to open files and operate office equipment or mechanical equipment; mobility between departments or physical locations, and attend meetings of coworkers and management, • Climbing/Stooping/Kneeling: Must be able to climb, stoop, or kneel to perform routine tasks within the scope of job, • Lifting up to 50 lbs./ Pulling/Pushing:, • Ability to perform functions in a fast paced environment., • Promote and lead by example a safety culture that drives safety as number one., • Able to work in a varied temperature environment., • Adheres to Company Policy and Procedures., • Maintain a flexible work schedule to provide program continuity and visibility., • Acts as a role model outside and within the Company., • Performs duties as workload necessitates., • Maintains a positive and respectful attitude., • Meets departmental productivity standards., • Provides guidance for coworkers as needed or as requested., • Communicates regularly with supervisor about job-related issues., • Demonstrates flexible and efficient time management and ability to prioritize workload. *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Thompson First Group is currently seeking a qualified Boiler Operator for a local client in Syracuse, NY. Candidates who have a background working with steam boilers, air compressors, electrical equipment, pumps, motors, power generating equipment and pressurized piping systems including water, steam, oil, compressed air, and natural gas are encouraged to apply. Essential Functions: • Plan and perform all required operations to install, maintain and repair steam boilers, air compressors, complicated electrical equipment automatic boiler controls, pumps, motors, power generating equipment and pressurized piping systems including water, steam, oil, compressed air, natural gas as related to apparatus in the powerhouse., • Perform all chemical tests as needed to properly maintain boilers and associated equipment., • Tear down complicated units, determine extent of troubles, repair or replace defective parts or wiring and reassemble., • Use a normal range of hand tools and pipe fitting machinery to bend, thread and cut pipe. Use torch to sweat copper joints and solder as required., • Install and maintain high pressure steam stations throughout the facility including steam lines, traps, strainers, regulators, valves and insulation, • Troubleshoot powerhouse equipment to isolate problems and repair both analog and digital control systems as needed, • Identify common symbols on mechanical drawings and follow both electrical and plumbing diagrams Basic (Required) Qualifications: • Three years experience with steam boilers, air compressors, electrical equipment, pumps, motors, power generating equipment and pressurized piping systems including water, steam, oil, compressed air, and natural gas, • Experience with reading schematics and blueprints, • Experience working in a manufacturing environment., • Five (5) full-time years’ experience in powerhouse technician, • 401K Contributions, • Medical, Dental, Vision Insurance effective Day 1, • Paid Time Off – Vacation and Holiday’s, • Employee Assistance Program Thompson First Group is an equal opportunity employer. All applicants will be considered for employment regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law.

Make Your Career in Aerospace Manufacturing! Sign-on Bonus Up to $1,000. Are you ready to join a fast-paced, collaborative environment and build a rewarding career in manufacturing? Consolidated Precision Products (CPP) is a sand-casting foundry that specializes in complex aerospace and defense products. We are looking for talented individuals to join our team. We'll provide the training to give you the skills you need to succeed. What matters most is your energy, strong work ethic, attendance, and dedication to quality. This is a great opportunity to join a stable & growth-oriented company that has been in business for over 100 years! What do we have to offer you? • Starting at $25/hour (Or more with direct experience), • Paid training and overtime potential, • Full benefits package which includes Medical/dental/vision/life/disability insurance, • Quarterly bonus program and 401(k) with match, • Robust paid PTO & holiday pay, • Upward mobility and leadership that strives to help you succeed., • Sign-on bonus up to $1,000 to welcome you aboard! What will you do?, • Places film against viewing screen to conduct initial and final reading and interpreting by examining castings for flaws such as blows, cracks, excess sand, wires, gas porosity gas holes, core shifts, segregation, etc., • Ensures all developed film contains the proper number of X-ray shots, types of angles, part numbers and other requirements specified by the Company or customers., • Uses densitometer to ensure film coming out of the developer meets density specifications., • Ensures all film is properly developed by checking appropriate gauges, temperatures, etc., • As required, types up customer reports identifying X-ray reading results and interpretations., • Acquire additional certifications and credentials as required for work or career development, • Work on/participate in special projects as needed or assigned by management Qualifications:, • Education: High school diploma or equivalent required, • Experience: 1-2 years of directly related NDT experience Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires access or use of hardware and technology which is subject to the International Traffic in Arms Regulations (ITAR) and Export Administration (EAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. “green card holder”), Political Asylee (permanent), or Refugee. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. E.O.E. This is a non-management position This is a full time position

Consolidated Precision Products (CPP), an aerospace and defense manufacturing company, has an immediate need for a CNC Programmer to join our team! This is a 1st shift position at our plant in Chittenango, NY. This position is responsible for programming computer numerical control (CNC) machines to produce parts in accordance with detailed engineering drawings, customer and ISO Certifications. Blue-print reading experience is preferred in this position. The CNC Programmer will work with other CNC Machinists to effectively set up, run, program, and trouble shoot new and existing parts and production lots, as well as successfully detect malfunctions in machine operations. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Compensation $32.00 - $45.00 hourly JOB SUMMARY This position performs machine setups and manufactures machined parts and develops programs for computer based numerically (CNC) controlled machine shop equipment to perform standard metal cutting to meet customer requirements. ESSENTIAL JOB FUNCTIONS/DUTIES • Demonstrated ability to understand and work with advanced “shop” mathematical concepts., • High level of experience of all aspects of machine manufacturing. i.e.: 3, 4, 5 axis machines, material types, tooling, fixtures, fixture design, part holding techniques, and advanced CNC programming., • Excellent analytical and problem solving and resolution capability., • Enthusiasm, drive, and work ethic in an ‘on-time’ environment., • Ability to work with management, others within engineering, purchasing, and shop floor staff to complete estimates, provide feedback to improve processes, and resolve manufacturing issues., • Demonstrates a solid understanding of 3D modeling software., • Has the ability to create training materials and train shop floor employees., • Possesses creative thinking skills and is a detail-oriented personality., • Is able to communicate well to other members of the development team., • Eliminate waste and elevates productivity using Lean Manufacturing program., • Participate in the startup of new equipment., • Ability to cooperate; work effectively and professionally with all levels in the organization, both internal and external customers., • Adhere to AS9100 and ISO procedures and compliance, • Ensures all equipment controls are accurately defined and maintained., • Contributes to team effort by accomplishing related results as needed., • Responsible for adherence to all safety policies, practices and procedures., • Ability to work flexible hours and demonstrate reliability., • Education: High School or GED Diploma required - Associates Degree or Certification in related field preferred., • Experience: 3-5 years of experience with CNC Programming, and operation of CNC machines., • Knowledge of 3D modeling software and Gcode a must., • Familiar with Motion Control and Vision., • Decision Making and Problem Solving: Able to take action in solving problems with exhibiting judgment and a realistic understanding of issues., • Experience and skill in troubleshooting control systems., • Knowledge of GD&T practices, • Experienced in interpretation of technical drawings CPP-Syracuse is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Call Please. This is a non-management position This is a full time position

Saab, Inc. in East Syracuse, NY is seeking an experienced Lead Solder Technician to join the Manufacturing / Production team. Responsibilities will include: · Handling circuit boards and electronic components in accordance with electrostatic discharge sensitive safe-handling procedures · Reading schematics in order to perform repairs of circuit boards · Performing various circuit board soldering, to include through-hole and surface mount technology (SMT) components, including boards with conformal coatings · Performing solder repairs and rework on both new and previously assembled circuit boards · Rework, Repair, and Inspection of circuit boards and components using a high-powered microscope · Propose expenditures for tools and equipment to support circuit board solder repairs · Train personnel on performing solder repairs and rework Compensation Range: $ 25.19 - $ 30.19 The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills And Experience · High School Diploma · 7+ years of relevant experience, soldering in a manufacturing environment · Ability to use a high-powered microscope · Ability to read and understand work instructions and assembly drawings · Knowledge in IPC-A-610/IPC-J-STD-001 standards Desired Skills and Experience · Certification in IPC-A-610/IPC-J-STD-001 standards · Knowledge or certification in the IPC-7711/7721 standard Physical Requirements · Sitting at a soldering station for long periods of time. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits: * Medical, vision and dental insurance for employees and dependents * Paid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability * 401(k) with immediate vesting on employer match * Tuition assistance * Student loan assistance * Wellness account, Care.com subscription and employee assistance programs * Employee stock purchase program with employer match Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job Description Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offer * Competitive salary * Paid vacation/holidays/sick time- 15 days of vacation first year * Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one * Encouraging and collaborative team environment * Dedication to safety through our Zero Harm policy * Check us out!: ___ Check us out!: What you will do The Commercial Sales Executive is responsible for promoting and selling Johnson Controls Security services and technology within an assigned territory, using relationships, and closing new business for Johnson Controls Security and ensuring customer retention. This person is the Johnson Controls Security "brand steward", charged with telling the Johnson Controls Security story and clearly demonstrating that Johnson Controls Security is the leading electronic security provider. The Commercial Account Executive is responsible for securing profitable sales and upgrades to new, existing and discontinued Johnson Controls Security Commercial customers while improving customer satisfaction and retention by initiating post installation follow-ups. This rep will also have a commanding knowledge of our product line, as well as that of our services. How you will do it * Adhere to current Johnson Controls Security policies, procedures, products, programs and services. * Create new market share by selling Johnson Controls Security products and services to new local commercial customers. * Sell additional products and services to existing accounts that continue to present new sales opportunities. * Sell add-ons, amend, and convert existing customer systems to meet the customers' expectations. * Renew existing customer agreements. * Responsible for resale opportunities within an assigned territory Identify prospects using creative lead-generating techniques and maintain productive working relationships with existing customers. * Independently establish call plans and customer follow-up strategies and tactics, and consistently apply time and territory management techniques. * Follow up with prospects. * Maintain an in-depth knowledge of complete line of products/services and customers' issues and needs through in-house training and reading/research. * Obtain referrals and work with Centers of Influence. * Process work order and complete all paperwork in accordance with approved and standardized procedures. * Conduct post-installation follow-up by contacting customer, ensuring commitments were met and affirming customer satisfaction once the customer has been in service What we look for Required * High school degree or equivalent required. * Excellent oral, written and presentation skills with the ability to present to senior level executives within the customer and Johnson Controls Security organizations * Ability to work a full-time schedule * Available for local travel Preferred * College degree preferred. * Minimum of 2 years’ experience as a successful commercial sales representative in the security, IT or other technology sales industry, demonstrated by the consistent ability to meet and exceed quota. HIRING SALARY RANGE: $52,000 - $69,000 (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This role also offers a competitive Sales Incentive Plan that will take into account project, quarterly, and annual margin. This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ___ For details, please visit the About Us tab on the Johnson Controls Careers site at #LI-AA2 #SalesHiring

Job Description United Radio is a employee-centric organization that is in a high-growth phase. We are building a team of people who share core values of positivity, exceptional work ethic and a commitment to working smarter to get the job done. Through partnerships with Motorola, Sierra, JVC Kenwood, Avigilon, and the like, United Radio services the mission-critical communications needs of its sophisticated customer base. With 100 years in the industry with a reputation for technical expertise and the ability to offer customized solutions, United Radio delivers a variety of communication applications across a diverse mix of over 40 end markets in the US. United Radio’s headquarters are in Syracuse, NY with secondary locations in Salt Lake City, Utah and Peachtree, Georgia. Security/2-Way Radio Field Technician United Radio, CNY’s leader in electronics and 2 way communications is seeking qualified individuals for positions on our Field Installation and Service Technician team. Responsibilities will include: Installing, servicing and troubleshoot security system components as well as maintaining fire and security equipment including Access Control Systems. Successful candidates will possess a minimum of 2 to 5 years related electrical, technical and/or Security controls experience. United Radio offers highly competitive salaries and benefits. As a Field Technician, you will be responsible for customer installations and maintenance of electronic and communications equipment in buildings and critical use vehicles. You will also be responsible for installing and maintaining systems such as two-way radios, fire alarms, CCTV, security systems, surveillance equipment, and other technology as needed. The ideal candidate must have excellent communication skills, be motivated, customer service oriented, possess a willingness to learn, and be reliable. The Field Technician will interface directly with the end customer therefore, a professional attitude and appearance are vital. RESPONSIBILITIES • Install, push, and pull coax, fiber and CAT 5 / 6 cables for communication and low voltage systems through building floors, walls, and ductwork. Including terminating and testing cables as needed., • Build out closets to include racking equipment or installing ladder racks, ladder trays or J-Hooks for running cable., • Meets with customers onsite to develop an installation strategy and coordinates with staff to ensure access to locations where products will be installed., • Participate and be part of the commissioning and testing team for installation projects., • Prepares written reports and communicates verbally with customers as well as with 3rd party vendor representatives, colleagues, and supervisors., • Read blueprints and installation plans for communications and electrical systems by reading drawings, schematics, blueprints, and other visual aids to determine where and how to install each component of the system., • Troubleshoot and diagnose problems by running diagnostic tests to determine whether there is an issue with the wiring or a part, or if the entire system requires replacement., • Assist with customer estimates to determine what tools and materials are needed to install or repair a system, including estimating time for completion., • Maintain and update customer information, repair logs, inventory, parts and material and similar records by using basic computer skills. QUALIFICATIONS • Experience installing CAT 5/6 cable, related support devices, and terminating coaxial cable., • Experience installing communication, two-way radio, CCTV, RF signal distribution, Broadband, and low voltage systems is preferred., • DAS (Distributed Antenna System) knowledge preferred., • Ability to use basic tools and test equipment including hand tools, power drills, multi-meters, and watt meters., • Accommodate an on-call schedule, • Must physically be able to lift 50 lbs., maneuver into and out of heavy equipment and work on ladders and other elevated locations including at times standing for extended periods, and occasionally working outside in extreme temperatures., • Ability to understand basic wiring diagrams and basic DC circuit theory a plus., • Ability to work with minimal supervision, keeping up with work schedules, work under pressure and be able to meet deadlines for delivering quality solutions on time., • Must have good communication skills, both verbal and written., • Must have basic computer skills and proficiency with MS Excel, Word and Outlook., • OSHA Safety Training and Low Voltage certifications a plus., • Must have a valid driver’s license., • Drug screenings and background checks are part of the hiring process, which may include a Motor Vehicle Record check. Total compensation for this role is market competitive. The anticipated salary range for this position based out of Syracuse, NY is estimated between $52,000 and $70,000. The actual salary will vary based on applicant’s experience, skills, and abilities, geographic location as well as other business and organizational needs. United Radio offers competitive compensation to all of its employees as well as comprehensive benefits which include: Medical, Dental, 401k, Paid-Time-Off, Holiday pay, and much more. United Radio is proud to be an equal opportunity workplace free from discrimination and harassment. We seek to recruit and retain the most talented people from a diverse candidate pool and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other disability protected by law. All employment is decided based upon qualifications, merit, and business need. Sign on bonus available if you possess a current ETA certification of Senior CET, Master Specialty or Master CET.

Job DescriptionDescription: Haun Welding Supply is seeking to hire a full time Gas Cylinder Filler Associate to join our growing team in Syracuse. If you are looking for full time hours, Monday thru Friday, and no weekends we offer that and much more including a monthly bonus program! The ideal candidate would be responsible for: • Handling high pressure, medical and liquid cylinders., • Following proper procedures relating to prefill, in process and post filling for medical and industrial gas cylinders., • Completes and maintains required paperwork., • Understanding the hazards of various gases; size and contents of cylinders by reading and interpreting cylinder labels and the color coding of tanks. Requirements:, • Must be 18 years or older, • Prior warehouse experience a plus!, • Prior Gas Cylinder filling experience a plus!, • Must have the ability to repetitively lift, push, and pull 35+ pounds, reach above head height, squat, kneel, bend and reach., • Must have the ability to stand and walk for long periods of time., • Must have the ability to push and pull manual and powered material handling equipment (i.e., pallet jacks, hand-truck, and tow motor, etc.) containing cylinders., • Must have basic computer skills., • Must have the ability to read information in small and large print. Since 1958 Haun Welding Supply has been delivering the best in quality and value. This philosophy has helped Haun Welding Supply grow into an industry leader in selling and distributing welding equipment, tools and supplies throughout New York State, Northern Pennsylvania, Vermont, New Hampshire and Connecticut. As the many satisfied customers have come to know, THE HAUN COMPANIES offer products and services that you can depend on and an efficient cost-effective partnership that helps businesses succeed. We attribute the success of our companies to our exceptional team of Haun employees!

Job Description Required IPC 600, 610, 620 certification and experience The Source Inspector, (SI) is responsible for performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection. The source inspection may include reviewing all paperwork relating to the product at hand. This includes operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly. The SI will also verify FAI’s to AS9102 for accuracy and completeness. The SI must be familiar with hand tools and gaging techniques. The SI will also be fluent in B/P interpretation and GD&T. Source Inspection will occur at end customer’s suppliers’ location. The SI will travel to these locations. Job Functions: • Experienced quality individual in dimensional and visual inspection of aerospace machined components, • Experience in performing FAI’s – AS9102 (The SI will verify supplier’s FAI, not perform them), • Experience with hand measurement tools, • Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required), • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required), • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • MS Outlook, and EXCEL experience, • Mechanical inspection experince preferred, • Strong verbal, written and communication skills, • Fluent English – reading and writing is required, • Professionalism, integrity, and exceptional attention to detail, • Strong independent decision-making skills; excellent analytical skills and professional judgment, • Excellent interpersonal, written, and verbal communication skills, • Work as an effective team member, • Establish and maintain effective working relationships, • Fluent English – reading and writing is required, • Pass pre-hire background check including DMV and credit screening, • Pass Pre-hire Drug Screening Supervision Received:, • The work is performed under general supervision, • U.S. Citizenship required Preferred Education and Skills (including certifications): • 3+ years’ experience as a quality inspector, technician, or engineer., • 3+ years’ experience in an aerospace manufacturing facility, • 3+ years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation, • Proficient with Microsoft Outlook and Excel, • Effective communication skills, • Detail oriented, • Any combination of education and experience may be considered, • 12 days paid vacation first year, increasing with service years, • 6 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Company DescriptionTRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Thank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications. TRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans. NOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES,TRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain.\r\n\r\nThank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications.\r\n\r\nTRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans.\r\n\r\nNOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES,

Location: 4469 Steelway Blvd. N Liverpool, NY, 13090 What’s the Job? Ready to accelerate your career while helping our customers move forward? As a Technician at Penske, you’ll do exactly that. Here, you’ll do preventative maintenance and minor repairs on the newest and best maintained fleet of vehicles in the industry. You will help our customers keep their vehicles in shape and on the road. Whether you’re looking for your first job out of school or have some vehicle repair experience and are looking to switch gears, becoming a Penske Technician may be a great fit for you. Why is this job awesome? For starters, no day is the same. You’ll get to work on lots of different types of equipment—not just one manufacturer. We work hard to get the job done, but we also make sure you have the time you need to do the job right. Safety and reliability are our top priorities. Working alongside experienced supervisors and master technicians, we’ll teach you about our vehicle maintenance processes and the cutting-edge technology we use. And we will make sure you are getting the industry certified training you need to succeed and grow your career. You’ll learn from the best in the industry. We also take pride in how clean our facilities are, and we provide you with all the necessary major shop tools. If you are mechanically inclined or have completed any vehicle repair training, are willing to learn, and interested in a stable career with a lot of opportunity for growth, join our team. Main Responsibilities: • Making sure vehicles are maintained and safe for our customers • Using Penske’s tools and technologies to log, research and complete repairs, including basic vehicle diagnostics • Doing preventative maintenance repairs—like replacing or rotating tires—and completing vehicle component lubrication and replacement, some electrical system repairs, and cooling system maintenance on gas and diesel engine vehicles • Partnering with your manager to learn new skills using Penske’s technician training and hands-on coaching • Working on other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary: $25.25/hr. • Shift Premiums: $3.00 (2nd shift), $4.00 (3rd shift) • Career stability • Opportunity for growth • Excellent benefits, including lots of time off: Benefits - Penske () • Strong, well-rounded training on a variety of OEM equipment (Penske’s Technician Certification Program is certified as a Continuing Automotive Service Education provider) • Advanced vehicle maintenance technology • Location and schedule flexibility Qualifications: • High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred • Basic mechanical aptitude and 1-2 years of automotive or diesel repair experience (preferred) • Valid driver’s license • The ability to solve problems and comfort using tools • Excellent customer service skills and communication skills • The ability to work well as part of a team and outside • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. • Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. • Willingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. • The associate must be able to work safely at heights using applicable ladders and elevated working platforms. • The associate must be able to safely work in all weather conditions. • Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. • The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Visit Go Penske to learn more. Job Category: Vehicle Maintenance/Mechanics/Technicians Job Function: Truck Maintenance Job Family: Vehicle Maintenance Address: 4469 Steelway Blvd North Primary Location: US-NY-Liverpool Employer: Penske Truck Leasing Co., L.P. Req ID: 2507936

Job Description Direct Send Temporary General Laborers- Immediate and Urgent Need!!! Days: Monday through Friday Hours: 8:00am until 4:30pm Pay: $15.50 per hour Duration: Approximately 2 months Benefits: Great extra job to get money for the holidays! Weekly Pay Job Duties: Relabeling cables for kits . Requirements: Must be fluent in English , reading writing and speaking High School Diploma or GED equivalent Steel Toe Shoes Own Transportation as it is NOT on a bus line and Uber is not reliable Ability to concentrate on details Ability to be on time everyday and miss no time during duration of assignment- no time off for any reason Ability to lift 30 pounds What happens next: If you are motivated, dependable, and are looking to jump start your career please apply now with your updated resume. We will proceed to the next steps if your skills and experience look like a good fit for the position. Even if this position does not work out, your information is still in our database. That means all our recruiters will have access to your profile, expanding your opportunities even more. Staffworks is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, national origin, sex, age, disability, veteran status, sexual orientation, gender identity or any other basis protected by federal, state or local law. Apply now for consideration! APPLY TO WWW.STAFFWORKSCNY.COM

Job Description Direct Send Temporary General Laborers- Immediate and Urgent Need!!! Days: Monday through Thursday Hours: 1st shift : 5am until 3pm, Monday - Thursday , $16.00 - need two people 2nd shift : 3pm until 1am, Monday - Thursday , $17.60 - one person Duration: Approximately 2 months Benefits: Great extra job to get money for the holidays! Weekly Pay Job Duties: Using had tools to do de-chipping parts . Requirements: Must be fluent in English , reading writing and speaking High School Diploma or GED equivalent Steel Toe Shoes Own Transportation as it is NOT on a bus line and Uber is not reliable Ability to concentrate on details Ability to be on time everyday and miss no time during duration of assignment- no time off for any reason Ability to lift 30 pounds What happens next: If you are motivated, dependable, and are looking to jump start your career please apply now with your updated resume. We will proceed to the next steps if your skills and experience look like a good fit for the position. Even if this position does not work out, your information is still in our database. That means all our recruiters will have access to your profile, expanding your opportunities even more. Staffworks is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, national origin, sex, age, disability, veteran status, sexual orientation, gender identity or any other basis protected by federal, state or local law. Apply now for consideration! APPLY TO WWW.STAFFWORKSCNY.COM Optimized Job Description Writing

Job Description 1st Shift Packing Associate - Liverpool, NY Hours: • Monday – Friday, • $16.50 - $17.00 per hour Depending on Experience Responsibilities and Duties up to and not limited to: • Constructs, lines, and pads cartons using hand tools., • Examines containers, products, and materials for quality control and ensures packing requirements, • are met., • Seals containers or materials using tape., • Marks and labels containers, container tags, labels, or products., • Enters packing, order, and product information in or on required forms, records, or other documents., • Works in assembly room with hands on intricate material jobs as assigned by date from job racks., • Sits and works at table., • Closely follows directions on job cards to perform jobs, counting and packing, as directed., • Performs these various jobs utilizing glue, pins, adhesive, paints, Velcro, etc. as well as hand tools, as applicable., • Hauls bagged or boxed materials ready for shipment to the shipping area and communicates with packer., • Has focused attention to detail and ability to understand and spot material imperfections and adjust/figure out resolutions. Required Skills and Abilities: • Must have a High School Diploma or a GED, • Must have at least one year of packaging experience, • Must be able to lift 50 pounds, • Prior experience with working with hand tools., • Ability to do easy math such as adding, subtracting, ., • Ability to follow directions., • Ability to assess products for quality compliance., • Basic understanding of principles and processes of customer service., • Proven ability to successfully multi-task. Reading, Speaking and Comprehending English – Basic Math Skills, including counting – Ability to Focus and Stay on Task Benefits: • Temp to Hire, • Paid Weekly, • Great Opportunity to Work for a Small Company and hone skills What happens next: If you are motivated, dependable, and are looking to jump start your career please apply now with your updated resume. We will proceed to the next steps if your skills and experience look like a good fit for the position. Even if this position does not work out, your information is still in our database. That means all our recruiters will have access to your profile, expanding your opportunities even more. Staffworks is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, national origin, sex, age, disability, veteran status, sexual orientation, gender identity or any other basis protected by federal, state or local law. Apply now for consideration!

Job Description Parksite is looking for a full-time Warehouse Associate to join our team! The Warehouse Associate will operate a forklift in our distribution center and pick orders using the voice picking system. Assist shipping and receiving, unloading trucks, checking in merchandise as well as other duties. Summary: Responsible to act in accordance with the policies set forth in the current procedures manual. Receives, stores and distributes material. tools, equipment and products within Parksite Warehouse by performing the following duties: Essential Duties and Responsibilities including the following. Other duties may be assigned: • Assist shipping and receiving, unloading trucks, checking in merchandise, matching purchase orders to sales orders and distributing to appropriate associates for processing., • Reading customer orders, work orders, shipping orders, or requisitions to determine items to be picked, checked and shipped., • SKU label new inbound items and move from receiving to storage areas., • Sorting and placing materials or items on racks, shelves, or in bins according to predetermined sequence such as size, type, style, color, or product code., • Pick orders using VoCollect, leader in voice selecting technology., • Ensuring warehouse is accessible and safe for salespeople and customer traffic., • Assembling customer orders from stock and places orders on pallets., • Maintain a clean, well-organized, safe working environment., • Recording amounts of materials or items received or distributed via appropriate process., • Assisting in counting of physical inventory and conducting regular cycle counts., • May be assigned facilities maintenance duties as needed., • Preparing parcels for mailing., • Sweeping, dusting and mopping., • Wearing the proper safety equipment. Education and/or Experience: • High school diploma or general education degree (GED), • Three months or more related experience and/or training; or equivalent combination of education and experience., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals., • Ability to write routine reports and correspondence., • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals., • Ability to compute rate, ratio and percent., • Voice picking experience a plus., • Lumber/Building product experience., • Receiving experience., • Inventory control experience. Benefits: • 401(k) Program, • Company Paid Life Insurance, • Daily dress code of "business casual", • Health, Dental and Flexible Spending Insurance Plans, • A positive work environment with all team players Parksite is a sales, marketing and distribution company serving many segments of the building industry, with a focus on both interior and exterior products. We are proud to supply the best Fabricators and Building Material dealers with category leading products for the residential, commercial and remodeling markets. Focusing on superior products and exceptional service, Parksite's unique marketplace niche is through education. We begin by identifying products with distinctive applications and specifically educate and emphasize the value of these products directly to architects, builders and designers. With this approach, we have become a leader in the industry with each of the products we sell. We combine marketing expertise and industry knowledge to create demand for our supplier business partners. We help build brands.