Offres release engineer à Houston, TexasCréer des alertes d'emploi

Job DescriptionTest Engineer Location: Houston TX Employment Type: Full-time, On-Site Overview: Test Engineers are responsible for designing and implementing tests to ensure the product functions to meet high-quality standards via developing test plans, peer reviewing code, observing current processes, and testing materials through processes. Test Engineers work primarily in a Linux Shell, maintaining, diagnosing, and troubleshooting firmware. Duties and Responsibilities: • Develop and formulate testing steps for product., • Install, configure, troubleshoot, and maintain test equipment, server, and network., • Evaluate and research on product automation test fixtures., • Collaborate with NC team and IT team to finalize testing process and network setup., • Validate API program for auto-testing results upload., • Regularly communicate with customer to ensure product P/N testing steps and ECN implementation., • Work with Asia team to introduce new product with FAI results for NPI readiness review., • Provide findings of testing yield and failure units analysis and release SOP product testing steps to operator., • Participates in cross-group collaboration and corporate initiatives, aiming to improving corporate competitiveness, service quality, and costs., • Conduct project management training of best practices in order for projects and operations to run smoothly and effectively., • Attend conferences and training as required., • Perform other functions and other related duties as directed by Manager. Skill/Knowledge Requirements: • Three (3) or more years working with Python in a professional environment is preferred., • Three (3) or more years working with Bash in a professional environment is preferred., • Three (3) or more years developing or Testing firmware in a professional environment is preferred., • Experience in Linux shell (RHEL, CENT, CLES, or Ubuntu) is preferred., • Proficient computer skills in Microsoft Office., • Strong organizational skills for planning, multitasking, and managing time effectively., • Attention to detail., • Exceptional verbal and written communications., • Bachelor’s degree in Electrical and Electronic Engineering, Information Management, Information Engineering, or Computer Science is preferred., • Three (3) or more years of working experience as Test Engineer and or IT Sys Admin. Powered by JazzHR upLa68qJmf

Job DescriptionTest Engineers are responsible for designing and implementing tests to ensure the product functions to meet high-quality standards via developing test plans, peer reviewing code, observing current processes, and testing materials through processes. Test Engineers work primarily in a Linux Shell, maintaining, diagnosing, and troubleshooting firmware. Duties and Responsibilities: • Develop and formulate testing steps for product., • Install, configure, troubleshoot, and maintain test equipment, server, and network., • Evaluate and research on product automation test fixtures., • Collaborate with NC team and IT team to finalize testing process and network setup., • Validate API program for auto-testing results upload., • Regularly communicate with customer to ensure product P/N testing steps and ECN implementation., • Work with Asia team to introduce new product with FAI results for NPI readiness review., • Provide findings of testing yield and failure units analysis and release SOP product testing steps to operator., • Participates in cross-group collaboration and corporate initiatives, aiming to improving corporate competitiveness, service quality, and costs., • Conduct project management training of best practices in order for projects and operations to run smoothly and effectively., • Attend conferences and training as required., • Three (3) or more years working with Python in a professional environment is preferred., • Three (3) or more years working with Bash in a professional environment is preferred., • Three (3) or more years developing or Testing firmware in a professional environment is preferred., • Experience in Linux shell (RHEL, CENT, CLES, or Ubuntu) is preferred., • Proficient computer skills in Microsoft Office., • Strong organizational skills for planning, multitasking, and managing time effectively., • Attention to detail., • Exceptional verbal and written communications., • Bachelor’s degree in Electrical and Electronic Engineering, Information Management, Information Engineering, or Computer Science is preferred. 5kE6N915Vp

Job DescriptionTest Engineer Location: Houston, TX, United States Employment Type: Full-time, On-Site Overview: Test Engineers are responsible for designing and implementing tests to ensure the product functions to meet high-quality standards via developing test plans, peer reviewing code, observing current processes, and testing materials through processes. Test Engineers work primarily in a Linux Shell, maintaining, diagnosing, and troubleshooting firmware. Duties and Responsibilities: • Develop and formulate testing steps for product., • Install, configure, troubleshoot, and maintain test equipment, server, and network., • Evaluate and research on product automation test fixtures., • Collaborate with NC team and IT team to finalize testing process and network setup., • Validate API program for auto-testing results upload., • Regularly communicate with customer to ensure product P/N testing steps and ECN implementation., • Work with Asia team to introduce new product with FAI results for NPI readiness review., • Provide findings of testing yield and failure units analysis and release SOP product testing steps to operator., • Participates in cross-group collaboration and corporate initiatives, aiming to improving corporate competitiveness, service quality, and costs., • Conduct project management training of best practices in order for projects and operations to run smoothly and effectively., • Attend conferences and training as required., • Three (3) or more years working with Python in a professional environment is preferred., • Three (3) or more years working with Bash in a professional environment is preferred., • Three (3) or more years developing or Testing firmware in a professional environment is preferred., • Experience in Linux shell (RHEL, CENT, CLES, or Ubuntu) is preferred., • Proficient computer skills in Microsoft Office., • Strong organizational skills for planning, multitasking, and managing time effectively., • Attention to detail., • Exceptional verbal and written communications., • Bachelor’s degree in Electrical and Electronic Engineering, Information Management, Information Engineering, or Computer Science is preferred. LuVRJDHtUh

Job Description The Manufacturing Engineer Contractor will support the design, validation, implementation, and optimization of manufacturing processes and equipment for ophthalmic medical devices used in cataract and vitreoretinal surgeries. This role is hands-on and highly technical, with a strong focus on equipment validation, statistical process control, and continuous improvement in a regulated medical device manufacturing environment. Key Responsibilities • Lead, execute, document, and manage validation activities (IQ/OQ/PQ) to support the introduction or modification of automated and semi-automated production equipment and processes., • Design, develop, validate, and implement manufacturing processes for ophthalmic medical devices., • Provide hands-on engineering support for manufacturing equipment before, during, and after release to production., • Apply Lean Manufacturing and Six Sigma methodologies to optimize production processes., • Implement Continuous Monitoring using Statistical Process Control (SPC) to maintain equipment and processes in a validated state., • Perform continuous statistical analysis of Critical Quality Attributes (CQAs) and process indicators to ensure compliance with product specifications (CpK / process capability)., • Design fixtures and create technical drawings using CAD software (e.g., SolidWorks) to support daily production operations., • Develop and maintain standard work instructions and procedures to ensure robust and high-quality manufacturing processes., • Medical Device Validation (IQ, OQ, PQ), • Statistical Process Control (SPC), • Statistical Analysis techniques including:, • DOE, • ANOVA, • Gage R&R, • T-Test, • Tolerance Interval Analysis, • Control Charts, • Process Capability (CpK), • Proficiency with statistical software (Minitab), • CAD design experience (SolidWorks or equivalent), • Strong technical writing skills Education & Experience • Required:, • Bachelor’s Degree in Engineering or Biomedical Engineering, • Minimum of 1+ year of professional experience in a Medical Device Manufacturing environment, • Preferred:, • 12-MONTH CONTRACT

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic is seeking a dynamic and experienced Senior R&D Engineer to lead projects and design new products for Panelmatic’s power distribution division. The ideal candidate will bring a deep technical knowledge of switchgear and switchboard design, a passion for mentoring engineers, and a strong understanding of industry standards and requirements. Job Duties: • Design, create, and develop complex mechanical assemblies for multiple product lines, • Create drawings for parts, weldments, and assemblies, • Create test samples for projects, • Order material, obtain quotes from suppliers, and order parts, • Develop BOM for test samples and standard configurations, • Release BOM for test samples, • Create Standard configurations upon completion of testing, • Assist in the development of test plans, product documentation, and training documents, • Interact with nationally recognized test labs to coordinate test schedule and execute, • Manage time effectively and reallocate as necessary with minimal input from supervisors, • Seek opportunities for cost savings and increased efficiencies, • Attend IEEE conferences to develop and maintain a presence within the industry, • Use of DFM in R&D design, • Support the creation and maintenance of standard designs and configurations, • Provide support to manufacturing regarding product related questions and issues, • Provide technical support to purchasing and strategic sourcing as required, • Interact with organization to provide technical assistance as needed, • Communicate project status, including possible issues, with key stakeholders, • Support the creation and maintenance of engineering systems and processes, • BS in Mechanical Engineering with 5+ years of experience in medium voltage switchgear and switchboard design, • Knowledge of the typical mechanical design of medium and low voltage switchgear and switchboards, • Experience designing parts for sheet metal fabrication, • A strong level of understanding in the mechanical design of switchgear and switchboards including clearances required at different voltage levels, • Strong knowledge of ANSI, ASME, NEC and UL standards, • Advanced proficiency in AutoCAD, Inventor and SolidWorks required, • Strong organizational and time management skills required, • Ability to work in a multi project multitask environment with changing priorities required, • Analytical abilities and problem-solving skills required, • Excellent communication skills both written and verbal required, • US work authorization without sponsorship required, • Growth mindset with the ability to accept challenges required, • Ability to physically push, pull, and lift 50lbs or more required, • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic is seeking a detail-oriented experienced Sr. Electrical Engineer. The Sr. Electrical Engineer will design and implement utility grade, industrial, commercial, and domestic electrical power systems. Job Duties: • Lead the design and development of comprehensive electrical packages for switchgear projects (e.g., one-lines, three-lines, schematics, wiring diagrams, BOMs)., • Conduct a technical review of project, • Release bill of material for purchasing and fabrication, • Receive new product designs, product modifications and implement the new designs/changes into production engineering systems, • Provide support to product development for modeling and DFM (design for manufacturing), • Support the creation and maintenance of standard designs and configurations, • Provide support to manufacturing regarding product and project questions and issues, • Provide technical support, purchasing and strategic sourcing as required, • Mentor others on the engineering team, • Interact with mechanical engineering, project management and customers as required, • Communicate job status, including possible issues, with supervisor, • Eight plus years’ experience in medium voltage switchgear design, • BS in Electrical Engineering degree required, • Knowledge of control circuits, transfer schemes, differential schemes, PT/CPT load calculations, • Experience in front elevation, three-line and one-line creation, • Experience turning quote and customer specifications and drawings into a complete drawing and documentation package ready for customer and construction, • A strong understanding of the mechanical design of switchgear, • A strong understanding of internal wiring of switchgear, • Familiarity with ANSI, NEC and UL standards, • Passion for mentoring and guiding new engineers, • Preferably experience in leading teams, • AutoCAD and SolidWorks required, • Strong organizational and time management skills required, • Ability to work in a multi project multitask environment with changing priorities required, • Analytical abilities and problem-solving skills required, • Excellent communication skills both written and verbal required, • US work authorization without sponsorship required, • Growth mindset with the ability to accept challenges required, • Ability to physically push, pull, and lift 50lbs or more required, • Ability to sit, stand, and walk for four plus hours at a time required, • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages

Job DescriptionJob Summary Test Engineers are responsible for implementing the tests that ensure the quality and the functionality of a product. They are involved in all phases of the testing program, from install test daig, troubleshooting errors, and writing up final test procedures. Responsibilities: • Document technical issues and solutions, • Install new test diag when it releases, • Monitoring the all-test fixtures inside production, troubleshoot when it report as malfunction, • Creation and development of SOPs for new test equipment, • Schedule maintained for each test equipment, • Up to and including 3 months in Test Engineer roles, • Proactive and able to work well independently as well as in a team environment, • Work well with cross functional teams, • Strong ownership and organization skills, • Bachelor’s degree in electrical, Software, Mechanical, or related field Powered by JazzHR bbdEVewLY4

About EAG: EAG is a premier provider of consulting, back-office outsourcing, and IT outsourcing services, dedicated to supporting the energy industry. We specialize in delivering high-quality financial, operational, and technology solutions that empower our clients to optimize performance and drive growth. With a dynamic and collaborative culture, EAG fosters innovation, strategic thinking, and excellence in execution. Our team is passionate about leveraging industry expertise and best-in-class methodologies to deliver impactful results. Key Responsibilities: The Systems Engineer is responsible for a variety of daily tasks including but not limited to the following: • Collaborate with clients to gather business and technical requirements and translate them into practical, scalable solutions, • Design, implement, and support Microsoft 365 and Azure environments across multiple ITO clients, • Administer Windows Server, Active Directory, Entra ID, Intune, Exchange Online, SharePoint, and Teams, • Configure, deploy, and manage endpoint and infrastructure systems using NinjaOne RMM and other management tooling, • Provide tier 2/3 system, application, and infrastructure support with a focus on Oil and Gas applications and services, • Coordinate with team members and other ITO resources to ensure timely resolution of incidents and service requests, • Follow EAG’s Incident, Change, Problem, Knowledge, Configuration, and Release Management processes, • Maintain clear, timely communication with clients on tickets, changes, and any impacts to their environment, • Evaluate third-party vendors and tools to ensure they align with client goals and EAG’s approved technology library, • Develop and maintain documentation, standards, and operational processes, • Implement and operate solutions in alignment with EAG security policies, SOC controls, and client compliance requirements

Job Description Job Summary The Project Engineer is responsible for planning, developing and managing the engineering activities for projects. This person in addition they are responsible for compliance of specification, scheduling, and cost control of the project based on the sales release. This position is currently a contractor role, but has the potential to be a full-time role in 2026. JOB DUTIES/Responsibilities • Attend Client kick-off and internal kick-off meeting (If applicable), • Manage project engineering and related personnel functions and activities., • Ensure project engineering activities comply with company and contract requirements and support the overall schedule., • Develop, implement and administer project engineering procedures and other work controlling documents., • Interface with all departments as required to resolve problems, ensure quality of efforts in support of the overall project schedule., • Assist in the establishment of the overall schedule, • Review scope of supply with his supervisor., • Acknowledge Purchase Order as authorized by his supervisor, • Acknowledge Change Order as authorized by his supervisor, • Prepare requisitions and coordinate with the Purchasing Department., • Issue drawings/documents as directed by his supervisor, • Resolve technical issues with engineers as guided by his supervisor., • Assist in controlling project cost and change orders, • Prepare Inspection & Test Plans as directed, • Conduct site and shop visits as directed, • Monitor material, documents, fabrication and erection status and report to his supervisorEducation, • Bachelor’s degree in engineering or related field,, • Professional certification preferredWork Experience, • 5 years’ technical experience required, • 7 Years of technical experience in a related position in lieu of a bachelor's in engineering Required SKILLS/ABILITIES:, • Excellent verbal and written communication skills., • Excellent interpersonal and customer service skills., • Proficient in Microsoft Office Suite or related software., • Excellent organizational skills and attention to detail., • Take responsibility for the sustainability of Axens and ensuring quality performance, • Report any and all quality related issues or non-conformities to your manager, • Maintain awareness, proactively participate and support all Axens policies for quality management, • Assist in the continual improvement of an effective Integrated Management System complying with the requirements of ISO 9001:2015, • Take responsibility for the health and safety of self and others, • Report any and all health and safety incidents to your manager, • Maintain awareness, proactively participate and support all Axens policies and objectives regarding health and safety, • Assist in the continual improvement of an effective Integrated Management System complying with the requirements of ISO 45001:2018, • Take responsibility for the sustainability of Axens and protecting the environment, • Report any and all environmental concerns or incidents to your manager, • Maintain awareness, proactively participate and support all Axens policies regarding environmental protection, • Assist in the continual improvement of an effective Integrated Management System complying with the requirements of ISO 14001:2015, • Assist in achieving Site, Departmental, Regional and Global Environmental Management Program goals and objectives

Job DescriptionJob Description As an Advanced Field Service Engineer here at Honeywell, you will have the opportunity to provide advanced technical support and expertise to our customers. You will be response for performing maintenance, audits, configuration, programming, installation/commissioning, upgrades, and migration of complex/advanced Honeywell control systems (EXPERION PKS, TPS/TDC300). Your time will be spent validating customer requests, developing/maintaining/improving customer relationships, upgrades/migration planning and execution, all while ensuring Right and Fast Delivery ensuring the successful implementation of our solutions, and driving customer satisfaction. Your expertise and commitment to excellence will play a crucial role in the success of our field service operations and the growth of our business. You will report directly to our Field Service Manager and you'll work out of our Houston, Texas location on a Remote work schedule. In this role, you will impact the efficiency, productivity, and safety of our customers' operations by providing exceptional technical support and service. Responsibilities KEY RESPONSIBILITIES • Periodic communication with customers regarding technical and administrative issues, • Provide customer support on Honeywell Control Systems and serve as a customer contact for service-related issues/enquiries, • Configure, maintain and solve Honeywell hardware and software issues including: Experion PKS, other DCS hardware / software such as LCN, TPS, • Upgrade Experion software from one software release to another software release on live control system without causing any interruption to customer's industrial process, • Migrate Legacy Honeywell control systems to Honeywell's new technology offering, • Understand customer key processes and economic drivers and translate those into business opportunities, providing timely research and recommendations, • Assist Sales during sales pursuits and be the face of Honeywell to end-users, and competitors, • Learn the end-to-end product/solution development and delivery/execution of Honeywell products and solutions, • Use technical expertise of sophisticated Honeywell solutions/product offerings to improve customer experience Qualifications YOU MUST HAVE • 5 or more years of proven experience in field service engineering WE VALUE • Bachelor's degree in Engineering or a related technical discipline, • At least one L4 certification on any domain Experion or TPS., • Experience with Experion PKS Hardware & Software, in addition to Hiway, TDC, & TPS system experience including LCN, UCN, and Hiway equipment along with PC/Networking experience, • 3rd Party controls experience, • Networking and switch configuration knowledge, • Project Management experience (budget control, schedules, resource allocation, reporting) BENEFITS OF WORKING FOR HONEYWELL In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more information visit: click here The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Job Posting Date: April 14, 2026. About Us Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments - powered by our Honeywell Forge software - that help make the world smarter, safer and more sustainable.

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic is seeking a detail-oriented experienced Mechanical Engineer. The Mechanical Engineer will create/review models and BOM’s for power distribution equipment including Metal-Clad Switchgear, Metal-Eclosed Switchgear and Panelboards. Job Duties: • Review electrical diagrams and requirements from electrical engineering, • Convert electrical drawings into a mechanical package including elevations, section views and bill of material, • Provide electrical engineering with mechanical components of drawing package, • Release bill of material for purchasing and fabrication, • Receive new product designs, product modifications and implement the new designs/changes into production engineering systems, • Provide support to manufacturing regarding project questions and issues, • Interact with electrical engineering, and project management as required, • 1-3 years experience in sheet metal design, with a preference for medium voltage switchgear design or UL891 switchboard, • BS in Mechanical Engineering degree required, • Knowledge of the typical mechanical design principles, • Experience in creating 3D renderings and side views based on single line and elevation drawings, • Familiarity with ANSI, ASME, NEC and UL standards, • AutoCAD and SolidWorks experience preferred, • Strong organizational and time management skills required, • Ability to work in a multi project multitask environment with changing priorities required, • Analytical abilities and problem-solving skills required, • Excellent communication skills both written and verbal required, • US work authorization without sponsorship required, • Growth mindset with the ability to accept challenges required, • Ability to physically push, pull, and lift 50lbs or more required, • Ability to sit, stand, and walk for four plus hours at a time required Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description Location: Houston, Texas Position status: FT Exempt Status: Exempt CNPC USA is actively seeking a highly skilled and motivated Mechanical Engineer to join our growing team. This is a unique opportunity for an experienced engineer with expertise in completion tool design, testing, and product support. The selected candidate will hold a senior leadership position responsible for providing strategic direction, technical oversight, and mentorship to the mechanical engineering discipline. This role will play a critical part in shaping the organization’s engineering strategies, driving innovation, and ensuring excellence in project execution. This position reports directly to the R&D Manager of Completions and Stimulations. Responsibilities: • Provide innovative and cost-effective solutions requiring development or sustaining new or improved techniques, procedures or products., • Develop new products according to customer requirements from concept study to final product qualification and support., • Assists in planning, conducting and evaluating approaches to meeting the project objectives in a timely fashion., • Produce analyses and mathematical models and draw design conclusions based on results., • Conduct or participate in technical reviews of requirements, specifications, designs, code and other artifacts., • Assign, direct and review work of others and provide guidance., • Author technical reports, papers, articles, patents and presentations., • Keep abreast of novel technical concepts and markets., • Lead system integration efforts, collaborating with internal R&D teams to incorporate existing modules with newly developed in-house technologies., • Oversee tool testing and qualification, including lab validation, environmental testing, and reliability assessments, to ensure tool readiness for field deployment., • Support field trials and initial deployments, working closely with field personnel and customers to ensure successful operation and gather performance feedback., • Drive commercialization efforts, ensuring technical readiness and documentation for market release, while supporting product training and customer onboarding., • Bachelor’s, Master’s or PhD degree in mechanical engineering or related discipline., • Proven experience in developing or engineering HPHT downhole systems, preferably with tools temperature above 200°ree;C and pressure of 10,000psi or above., • Knowledge of completion tools such as packers, safety valves, liner hangers, etc., preferred., • Detailed operational knowledge of oil and gas industry mechanical equipment and a sound knowledge of engineering, maintenance, and planning., • Legally authorized to work in the United States of America. Work Environment: This job operates in a professional office environment. This role routinely involves standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential job functions. While performing the duties of this job, the employee is regularly required to talk or hear. This is largely a sedentary role; however, some filing and the ability to lift 20lbs and bend is required. Travel: This position requires some overnight international and domestic travel. Local travel between other CNPC USA locations and testing facilities is required. Supervisory Responsibility: This position has no direct supervisory responsibilities, however, does act as a mentor and point of contact for all mechanical design engineers. CNPC USA is an Equal Opportunity Employer (EOE). Qualified applicants are considered regardless of race, color, age, sex, sexual orientation, religion, disability, ethnicity, national origin, marital status, veteran status, or any other legally protected status. Disclaimer: The job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.

Job Description As a BCM (Baseboard Management Controller) Engineer, you will play a pivotal role in the design, specification, and development of firmware for innovative products and solutions. You will collaborate closely with cross-functional design teams throughout the planning, development, and validation stages of the program. In this position, you will leverage your expertise to address technical challenges and ensure the delivery of high-quality, functional, and reliable products. Your problem-solving skills will be crucial in resolving any technical issues, while your ability to work in a multi-disciplinary team environment will ensure that the final product meets the highest standards of performance and usability. Key Responsibilities: * Collaborative Development: Work as a key team player with cross-functional teams, including Electrical Engineering (EE), BIOS, Platform Architecture (PA), and Firmware (FW), during the development phase to ensure product success. Contribute to brainstorming, design reviews, and technical discussions to address key challenges in firmware development. * Firmware Design & Development: Design, develop, code, and debug Baseboard Management Controller (BMC) firmware, applying your knowledge of server hardware architecture, system design, and embedded systems principles. Ensure that the firmware is optimized for functionality, performance, and reliability. * Issue Resolution & System Maintenance: Maintain existing BMC systems by diagnosing and resolving issues reported by customers or Field Application Engineers (FAEs). Provide timely solutions to any firmware and hardware issues affecting product performance, both pre- and post-release. * Reliability and Compatibility Planning: Study BMC firmware specifications and configuration requirements to ensure that the firmware meets reliability and compatibility standards across different hardware platforms and environments. Plan and execute testing and validation strategies to identify and fix potential issues early in the development process. * Testing & Quality Assurance: Conduct test/unit tests to ensure firmware quality, stability, and functionality, utilizing automated test environments where applicable. Collaborate with the quality assurance team to implement comprehensive testing procedures that validate the firmware’s compatibility with server hardware and software systems. * Customer Support & Technical Assistance: Provide expert-level technical support for any reported issues related to BMC and hardware/firmware integration. Collaborate with customer support teams to resolve critical issues and help customers troubleshoot BMC-related problems. * Documentation & Communication: Document design processes, firmware specifications, and troubleshooting steps in a clear and organized manner. Present technical concepts and solutions to both technical and non-technical stakeholders in a logical, concise, and effective manner. Required Qualifications: * Education: Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related field. A higher degree is a plus. * Technical Expertise: Proficient in C and C++ programming languages, with a solid understanding of embedded systems and firmware development. Experience with embedded Linux systems is highly preferred. * Hardware Knowledge: Familiarity with SoC (System on Chip) architecture, particularly ARM-based systems and AST2x00 controllers, is a plus. Strong understanding of server hardware architecture, IPMI 2.0 (Intelligent Platform Management Interface), and related protocols. * Tools & Frameworks: Experience with AMI (American Megatrends Inc.) and Avocent SDK (Software Development Kit) is advantageous. Familiarity with IPMI, BMC interfaces, and server management tools is highly desirable. * Problem-Solving Skills: Excellent troubleshooting and analytical skills to quickly identify and resolve complex technical problems, both during development and after deployment. Ability to prioritize and manage multiple tasks effectively. * Communication Skills: Strong verbal and written communication skills, with the ability to present technical concepts clearly and concisely to both internal teams and customers. Able to write comprehensive technical documentation and reports. Powered by JazzHR moYkYI8wDk

Job DescriptionFoxconn Industrial Internet (FII) provides innovative design and advanced manufacturing capabilities. FII centers around Cloud Based Computing, Big Data, High-Speed Networks, Automation, and Industry 4.0 methodology. Join an expansive network of professionals who work together within a company culture of one shared mission. FII is seeking a highly motivated Thermal Mechanical Engineer (or equivalent) with expertise in thermal and fluids engineering to contribute to the cooling of servers. As a part of the Server R&D team, the Thermal Mechanical Engineers utilize CAD software to address thermal challenges in support of server designs and technical proposals, review design work with customers and collaborate with multi-functional teams to optimize designs, validate design work, and release the products to volume manufacturing. Responsibilities: • Work on R&D, perform thermal solutions with specifications, analytical and computational analysis, designs and characterizations including CFD simulations and CAD designs, along with laboratory validations of prototypes and manufacturing implementations from chip-to-board level thermal solutions through focus on system level to deliver innovative, compliant and commercially viable server products to the marketplace in a timely and cost-effective manner., • Collaborate with cross functional product development teams and overseas partners to meet reliability, power efficiency, system performance, and cost requirements., • Investigate new technology and designs during the product lifecycle of the project and drive design decisions; analyze/implement trade-offs while contributing to thermal solutions of product designs from conceptualizations to productions., • Compile test reports, summaries, and document investigations to contribute to insights to system layouts and product/solution improvements., • Report analyses results and design specifics to internal managements and external customers. Qualifications: • Minimum of Bachelor’s degree in an Engineering Discipline. An advanced engineering degree (MS or Ph.D.) with an emphasis on thermal sciences would be an added plus., • Strong fundamental backgrounds in heat transfer and fluid mechanics, understanding of cooling techniques for electronic components and equipment such as the passive and active heat transfer, air cooling, liquid cooling, two-phase immersion cooling, heat sinks, heat pipes, vapor chambers and fans thorough graduate level course works or industry experiences., • Knowledge of the thermal analysis and computational modeling, development of thermal solutions and methodologies at the server and system-level for semi-conductor products, data analysis and product characterizations, optimizations of thermal controls for increased quality and cost improvements, developments of thermal management techniques, • Strong knowledge of CFD principals as well as working experiences in creating analytical and numerical modes using CFD tools such as FloTherm, ANSYS-IcePak and Fluent etc., • Experience with defining thermal test plans, design of experiments on prototypes. Experiences in instrumentations, data acquisitions and data analysis, including uncertainty analysis. Experiences with various temperature, pressure and fluid flow measurement techniques. Basic controls, automations, acoustical knowledge is a plus., • Some experience with 3D/2D models utilizing CAD tools such as PTC Creo or Pro/Engineer or SolidWorks etc. is a major plus., • Good ability to visualize and clarify product needs from fundamental concepts through system considerations to ensure optimized designs., • 401(k) with matching contributions, • Health, Dental and Vision insurances, • Disability insurance, • Health savings account, • Life insurance, • Paid Time Off Foxconn Industrial Internet (FII) does not accept unsolicited resumes from headhunters, recruitment agencies or fee based recruitment services. FII is an Equal Opportunity Employer (EEO). We consider candidates regardless of age, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third party affiliation, sex, pregnancy, sexual orientation, gender identity, military, veteran status or any other characteristic protected by law. Job type: Full-time, on-site role, based in Houston, TX office. Powered by JazzHR phi5b26Wf1

Job Description Location: Houston, Texas Position status: Full-Time Exempt Status: Exempt Company Profile: CNPC USA is a subsidiary of China National Petroleum Company and serves as the North American headquarters. Our mission is to drive innovation through advanced research and development of next-generation technologies for oil and gas exploration and production. Job Summary: CNPC USA is seeking a highly experienced Senior Electronics & Firmware Engineer to lead the design, development, and qualification of high-temperature electronics and embedded firmware for MWD/LWD systems. This position is a key technical role responsible for downhole electronic architecture, high-temperature circuit design, power management, sensor interfacing, and electronics reliability in extreme drilling environments. The ideal candidate will have hands-on experience developing electronics rated ≥175 °ree;C (preferably up to 200 °ree;C) for MWD/LWD tools, with a strong understanding of downhole constraints such as shock, vibration, pressure, and thermal cycling. This role will directly support technology maturation from concept through field deployment and commercialization. Key Responsibilities: • Design, develop, and validate electrical and electronic systems for MWD downhole tools and surface support equipment., • Develop, test, and debug embedded firmware for microcontroller, microprocessor, or DSP-based systems used in downhole measurement and telemetry applications., • Design and evaluate analog and digital circuitry, including signal conditioning, power distribution, sensor interfaces, and communication interfaces., • Support the development of ruggedized electronics for high-temperature, high-shock, high-vibration downhole environments., • Participate in system integration, troubleshooting, root-cause analysis, and performance optimization of tool electronics and firmware., • Define and execute design verification, qualification, reliability, and environmental test programs., • Support manufacturing test, engineering test setups, and service quality assurance for product release and sustainment., • Work closely with mechanical, firmware, test, operations, and field teams to improve tool reliability and field performance., • Contribute to documentation including schematics, interface definitions, test procedures, failure analysis reports, and design records., • Bachelor’s degree in Electrical Engineering, Computer Engineering, Embedded Systems, or related discipline., • 5+ years of experience in electronics and embedded firmware development; for lead-level roles., • Hands-on experience with embedded firmware development in C/C++ for MCU, MPU, or DSP-based systems., • Strong knowledge of analog and digital circuit design, schematic capture, component selection, and board-level debugging., • Experience with signal conditioning, communication interfaces, power electronics/power distribution, and hardware-software integration., • Experience developing products for harsh environments, ideally including downhole, oilfield, aerospace, defense, or industrial ruggedized systems., • Familiarity with laboratory validation tools such as oscilloscopes, logic analyzers, environmental test setups, and automated test methods., • Strong troubleshooting and root-cause analysis capability for mixed hardware/firmware systems.. Preferred Experience: • Experience with MWD/LWD, mud-pulse telemetry, EM telemetry, directional drilling tools, or downhole sensors., • Familiarity with high-temperature electronics, shock/vibration survivability, and pressure-compensated or sealed downhole systems., • Experience with manufacturing test systems, qualification testing, and product commercialization., • Knowledge of sensor integration, downhole measurement systems, and embedded diagnostics., • Prior experience supporting both new product development and sustaining engineering for deployed tools.. Work Environment: This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets, and fax machines. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential job functions. While performing the duties of this job, the employee is regularly required to talk or hear. This is a sedentary role; however, some filing, bending and the ability to lift 20lbs is required. Travel: This position requires some overnight international and domestic travel. Local travel between other CNPC USA locations and testing facilities is required. Supervisory Responsibility: This position has no direct supervisory responsibilities, however, it does act as a mentor and point of contact for less experienced engineers. CNPC USA is an Equal Opportunity Employer (EOE). Qualified applicants are considered regardless of race, color, age, sex, sexual orientation, religion, disability, ethnicity, national origin, marital status, veteran status, or any other legally protected status. Disclaimer: The job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.

Job DescriptionSalary: The Senior Piping Materials Engineer plays a key role in defining, selecting, and providing technical guidance on piping materials for major industrial projects, with a strong emphasis on experience in U.S. LNG production facilities. This position supports engineering design, procurement, fabrication, and construction activities, ensuring all work aligns with relevant codes, standards, and project specifications. Office is located in Houston, TX. Key Responsibilities: Project Leadership • Lead the full piping materials scope for assigned projects, including coordination with global execution centers., • Establish, manage, and monitor project schedules, budgets, and deliverables., • Track progress throughout project execution and provide regular updates., • Work closely with project managers, engineering teams, and clients to clarify objectives and define scope. Engineering • Create, update, and maintain piping material specifications, classes, and datasheets for LNG and related facilities., • Offer expert guidance on material selection for piping systems, including carbon steel, stainless steel, nickel alloys, and specialty materials., • Ensure all designs comply with applicable industry codes and standards (ASME B31.3, ASME B31.1, ASTM, API, MSS, NFPA 59A)., • Review and approve vendor documentation, material submissions, and technical deviations., • Oversee the checking and release of piping deliverables for downstream use., • Support procurement activities by preparing requisitions and evaluating vendor bids., • Collaborate with stress, process, mechanical, and construction teams to confirm material compatibility and constructability., • Provide technical support during fabrication, installation, and commissioning., • Conduct failure investigations and recommend corrective measures when necessary., • Participate in design reviews and constructability assessments., • Mentor junior engineers and contribute to ongoing process improvements. Team Leadership • Supervise and guide junior engineers and designers., • Lead routine design reviews and ensure alignment across engineering disciplines., • Promote a collaborative, efficient, and high-performing team environment. Coordination and Communication • Interface with civil, structural, mechanical, electrical, instrumentation, and process safety teams to ensure seamless integration of piping systems., • Review and approve vendor drawings., • Take part in design reviews, HAZOP sessions, and project presentations., • Address technical inquiries and manage design changes effectively. Quality Assurance • Implement quality control practices and conduct periodic design audits., • Verify that all deliverables meet project requirements and regulatory expectations., • Identify and mitigate risks that could affect project execution. Qualifications Education & Experience • Bachelors degree in Mechanical Engineering, Materials Engineering, or a related discipline., • 815+ years of experience in piping materials engineering. Technical Skills • Proven experience with LNG facilities or cryogenic service applications., • Strong understanding of piping codes and standards (ASME, ASTM, API, etc.)., • Expertise in material selection for lowtemperature and corrosive environments., • Familiarity with MTOs, specifications, and procurement workflows., • Strong analytical abilities and effective communication skills., • Knowledge of NDE and piping system testing requirements is preferred., • Experience with valve selection and specification is an advantage., • Demonstrated technical leadership and sound decisionmaking., • High attention to detail and commitment to quality., • Ability to collaborate across disciplines and manage multiple priorities in a fastpaced setting. Leadership & Communication • Demonstrated ability to lead and mentor engineering teams., • Excellent communication, problemsolving, and organizational skills., • Capable of managing competing priorities effectively. Additional Skills • Experience with U.S. Gulf Coast LNG projects., • Knowledge of NACE standards and corrosion mitigation practices., • Background working with EPC contractors or owner/operator organizations., • Understanding of construction and installation practices., • Familiarity with project management principles., • Experience working on international projects or with multicultural teams is beneficial., • Professional Engineer (PE) license is a plus., • Experience with Smart Reference Data (SRD) is advantageous. About Novetus Engineering LLCNovetus is unsurpassed in our commitment to achieving our objectives as efficiently as possible. From a piping modification or pump upgrade project to helping to manage a multi-billion-dollar international development, Novetus will field the right team and the right systems to get the work done quickly and fit for the purpose. Novetus combines engineering workflow automation expertise with an experienced team of engineers and project managers to execute projects with exceptional efficiency. An engineering company focused on the oil, gas, and petrochemical industry, Novetus is based in Houston, Texas and is privately held.

Job Description Position: Customer Quality Engineer Location: Houston, TX & Guadalajara, MX Amphenol High Speed Products Group is the market leader for high speed, high bandwidth electrical connectors for the Telecom/Datacom market (Mobile Networks, Storage, Servers, Routers, Switches, etc.). Our products help to enable the electronics revolution and remain a key enabler for all the major Tier 1 OEMs globally. We have design, sales, and manufacturing locations globally and are currently seeking a Customer Quality Engineer to join our Cable Backplane Solutions team located in Houston, TX or Guadalajara, MX. RESPONSIBILITIES: We're hiring a Customer Quality Engineer (CQE) to be the primary technical interface between our customers and internal teams on all product quality topics. You'll lead customer issue resolution, drive corrective and preventive actions, analyze data to spot trends, and champion the Voice of the Customer (VoC) across design, manufacturing/operations, and support. Your work reduces defects and escapes, improves customer satisfaction, and protects our reputation in market. • Customer Advocacy & Communication, • Serve as the customer-facing owner for quality topics, ensuring timely, clear, and professional updates on issues, risks, and resolutions., • Translate customer feedback (VoC) into actionable requirements, defect reports, and improvement projects., • Manage customer portals/scorecards, track performance, and coordinate responses to audits and surveys., • Issue Management & Root Cause, • Lead structured problem solving (8D, 5 Whys, Ishikawa/Fishbone, DMAIC) for customer complaints, field returns, and escalations., • Own CAPA lifecycle (containment, root cause verification, corrective & preventive actions, effectiveness checks)., • Define and track SLAs/SLOs for response and resolution; escalate risks early., • Quality Planning & Risk Control, • Partner with Design/Engineering, Manufacturing/Operations, and Supplier Quality to prevent recurrence and design in quality., • Maintain risk artifacts (e.g., FMEA, Control Plans, APQP); ensure change control and deviation/waiver handling reflect customer commitments., • Manufacturing/Hardware - SPC, MSA/Gage R support first-article inspections and process validations., • Data, Metrics & Continuous Improvement, • Build and maintain dashboards for DPPM/PPM, defects per release, complaint rate, escape rate, turnaround times, warranty/return trends, and customer scorecards., • Identify and prioritize systemic improvements that reduce variation, cycle time, and cost of poor quality (COPQ)., • Collaborate with Supplier Quality on supplier-caused issues impacting customers; ensure closed-loop corrective action., • Compliance & Audits (as applicable), • Lead Gemba walks and introduce 5S methods Must-Have • Bachelor's degree in Engineering (Mechanical, Industrial, Manufacturing, Electrical, Quality) or closely related field; or equivalent experience., • 37+ years in quality engineering or customer-facing technical roles with direct ownership of escalations and CAPA., • Demonstrated expertise in root cause analysis (8D, 5 Whys, Ishikawa), corrective actions, and data-driven decision making., • Strong communication skillsable to engage customers credibly, synthesize technical detail, and influence cross-functional teams., • ASQ CQE, Six Sigma Green/Black Belt, or Certified Internal Auditor (ISO 9001)., • Experience with APQP, PPAP, FMEA, Control Plans, SPC, and MSA (manufacturing) or with incident postmortems, SLAs/SLOs, defect triage, and telemetry/observability (software)., • Familiarity with customer portals and enterprise systems (e.g., Salesforce/Service Cloud, ServiceNow, JIRA)., • Customer-first mindset with excellent follow-through and accountability., • Analytical, organized, and calm under pressure; skilled at prioritizing multiple issues., • Confident facilitator able to align cross-functional teams on corrective plans and timelines.

Job Description Microvast Holdings, Inc. (Nasdaq: MVST) is a technology innovator that designs, develops and manufactures lithium-ion battery solutions. Founded in 2006 and headquartered in Houston, TX, Microvast is renowned for its cutting-edge cell technology and its vertical integration capabilities which extends from core battery chemistry (cathode, anode, electrolyte, and separator) to battery packs. By integrating the process from raw material to system assembly, Microvast has developed a family of products covering a broad breadth of market applications. More information can be found on the corporate website: Job Description Microvast is seeking a lead BMS Engineer to join our team! Who can bring their fresh perspectives and experiences to the team. If you are zealous about an electrified future and looking for a place that values your curiosity, passion, and desire to learn, you have come to the right place. Duties/Responsibilities • Provide technical, and cross-functional support for BMS engineering activities, including process control, requirements definition, architecture design, software implementation, HIL testing, field testing, system validation, and software release management., • Collaborate with the global BMS teams and upper management to identify and develop (BMS) architecture and requirements for high-performance system functions, functional safety, cyber security, and creative solutions., • Manage BMS development plans, milestones, budgets, and schedules in accordance with technology roadmaps., • Build and maintain technical competencies in the BMS software, hardware, and validation teams. Provide technical guidance, mentorship, and leadership., • Ensure successful BMS integration with battery packs and external interfaces such as vehicle control units, dataloggers, etc., • Develop and maintain best practices and industry standards for Model-based function development with MATLAB/ Simulink in close consultation with an interdisciplinary and international team., • Govern design, implementation, and test activities for innovative control algorithms and Real-time battery SOX estimation methods, including the state of charge (SOC), state of energy (SOE), and state of health (SOH)., • Manage the development of statistic based on big data and machine learning models for predicting and forecasting field failure, cell chemistry variations, battery health degradation, and how various driving behaviors affect battery performance for safety and drivability., • Focus and govern collaborative engineering culture to enable our teams to provide feedback and different perspectives. Comprehend and develop our team members' goals and needs., • Provide technical support to the different teams within the organization, • Support for the commissioning of products internally or at the customer's(on-site or remotely), • Other duties may be assigned Qualifications: • Bachelor's or Master’s degree in computer science, electrical or other relevant engineering field or a comparable qualification, • 5+ years' experience in large, high-voltage battery pack development, from concept to market., • Over 3 years’ experience of leading/management of engineering teams., • Experience with battery management system (BMS) development and verification for high voltage battery packs., • Knowledge and experience of BM development according to functional safety ISO 26262 and cybersecurity ISO 21434, • Strong knowledge of embedded control software development process and documentation for safety-critical functions., • Experience using MATLAB/Simulink for model-based control development and electrical circuit/control simulation., • Excellent knowledge and experience of CAN communication protocols (SAE J1939, CAN 2.0B etc.), • Knowledge of requirements management and development process (IATF16949, APQP or V model, etc.), • Very good comprehension and analytical thinking skills, • Careful and conscientious, structured and organized way of working, • Team and communication skills This job description describes the general nature and level of work performed in this role. It is not intended to be an exhaustive list of all duties, skills, responsibilities, knowledge, etc. These may be subject to change and additional functions may be assigned as needed by management.

Job Description The Senior Electrical Project Engineer within Development Engineering team supports Engineering team in managing engineering requests for all projects in Development. Project Engineer supports all aspects of electrical design for solar, energy storage, and other renewable technology projects for utility projects. The role includes a wide variety of diverse assignments such as: due diligence for IM&A, siting, feasibility studies, new technology evaluation, RFI support, proposal evaluation, conceptual design, design review, and CAPEX estimates. Work requires familiarity with solar PV modules, batteries, combiner boxes, inverters, transformers, DC and AC collection systems. In addition, promote environmental stewardship and a health and safety-focused culture within the Engineering group. Additional responsibilities include providing support to operating facilities as needed. MAIN ACCOUNTABILITIES: • Support all development projects for electrical engineering related queries including but not limited to, requests for CAPEX input, early Engineering and Construction related questions, support for interconnection queue in coordination with Transmission Interconnection and Engineering Execution team, etc. until the project achieves PPA investment approval, • Provide PV/MV engineering support to Solar Business Development Engineering and Storage Business Development Engineering groups, • Maintain active involvement in all phases of Development Engineering work related to electrical design including solar project siting, DC and AC collection system routing, project substation siting, generator lead line routing, interconnect switchyard siting, interface related to crossing exhibit and agreement, interconnection studies, and generator interconnection agreement, • Provide preliminary internal engineering needed to support the Development pipeline by creating conceptual design layouts and detailed single line diagrams, three-line diagrams, and site layouts in AutoCAD for utility interconnection applications, electrical permits, and EPC RFP documents, • Create model for renewable projects utilizing ETAP software, • Ensure that the electrical portion of the BoP / EPC and long lead equipment estimate are optimized by providing project layouts, and MV one-lines which reflect optimized layout, along with constructability and operability reflected in order to maximize Power Purchase Agreement award potential, • Review and interpret design drawings, specifications, and documents related to project design, • Create and maintain a template library of drawings and calculations required for projects at the various stages of development and design, • Analyze complex engineering problems and offer effective and efficient resolutions in a timely manner while working on several projects at once, • Conduct value-engineering studies of alternative design approaches, • Maintain and improve existing scope of works, guidelines, specifications, schedule, and budget template, • Participate in project meetings and conference calls, • Review interconnection related documents including Feasibility Study, System Impact Study, Facility Study, Generator Interconnection Agreement, Interconnection Handbook, etc. and coordinate with Execution Engineering Group to ensure requirement (including NERC and FERC) are communicated for a compliant project design., • Assist Electrical Engineering Manager to oversee, guide, and manage the work of third-party consultants., • Occasionally participate in meetings with utility and Independent System Operator and guide a discussion on project behalf, • Serve as an interface between the Engineering group and internal clients including Transmission Interconnection, Development, Construction, Operations, Environmental, Estimating, Energy Assessment, Health & Safety, Procurement, Legal, and Central Technical Direction, to facilitate interdepartmental relations, • Create and maintain databases and various reports to streamline internal processes, • Maintain professional and technical knowledge by attending educational workshops, reviewing professional publications, establishing personal networks, and participating in professional societies, • Work with Electrical Engineering Studies group and CTD (Central Technical Department) to support early stage electrical studies required in order to support Development, Transmission Interconnection, and Execution Engineering teams., • Provides necessary technical documents including one-line, interconnection studies or agreement, design criteria and specification, etc. to support RFI and RFP release to potential construction contractor to gather intel for CAPEX refresh and potential contract award., • Reviews RFI responses and works with Estimation, Construction, Procurement, and Development to update CAPEX estimates as necessary, • Support technical review of any IM&A project by providing a technical memo, • Implement industry and company best practices consistent with the Central Technical Direction initiative, • Additional duties as required Direct reports: 0 direct reports Expenses: n/a Travel: Willingness and ability to travel as needed (up to 20% travel anticipated, with prior approval) Minimum qualifications: • Bachelor’s degree in Electrical Engineering is required, • 3 – 5 years of planning, design, and engineering experience is required, • Renewable Energy experience is preferred, • Power utility experience is preferred, • Knowledge of industry standards and codes, including National Electric Code (NEC) Institute of Electrical & Electronic Engineers (IEEE), National Electric Safety Code (NESC), and ANSI (American National Standards Institute), • Understanding of all applicable aspects of the electrical engineering discipline, • Knowledge of Power System software is preferred, • Proficiency with AutoCAD, • Knowledge of Microsoft Project and/or Primavera preferred, • Strong technical, analytical, and quantitative skills, • Strong interpersonal skills, • Strong level of initiative and ability to work with limited supervision, • Strong organizational commitment and high attention to detail, • Strong leadership and time-management skills, • Demonstrated ability to provide support on multiple concurrent projects, • Ability to plan, schedule, track, and monitor project progress and budget, • Strong written and verbal communication skills, including presentation skills, • Ability to work successfully with a team daily in a fast-paced, dynamic environment, • Sitting/Standing/Flexibility: Ability to frequently perform physical tasks including standing, sitting, walking, kneeling, bending, twisting, squatting, and reaching while on project sites; ability to stand and sit for 8 or more hours when in an office environment, • Speech/Reading: Ability to speak, read, and write English proficiently and deliver a variety of instructions furnished in written, verbal, diagram, or schedule form, • Lifting: Ability to lift items weighing up to 20 pounds, • Vision/Hearing: Ability to understand a variety of instructions furnished in written, verbal, diagram, or schedule form, • Safety: Ability to understand and communicate safety precautions when necessary, • Walking: Ability to walk several miles per day, including across unpaved and rough surfaces when on project sites

Job Description Senior Mechanical Engineer Own mechanical R&D for Fleetzero battery modules: From a clean-sheet concept through production-ready design. ABOUT THE ROLE You will be the driving force behind the full mechanical development lifecycle of our battery module products. That means owning designs from initial concept and first-article prototypes, through development testing, design validation, and into high-volume manufacturing. You will work closely with electrical, manufacturing, and systems engineering counterparts to deliver robust, producible hardware on aggressive schedules. This is a hands-on role. You will be building and testing prototypes yourself, running experiments, and iterating quickly. If you are the type of engineer who is equally comfortable at a CAD workstation and a build bench, this role is for you. WHAT YOU'LL OWN • Mechanical design of battery module enclosures, thermal management systems, and structural assemblies from concept through production release, • Prototype fabrication and first-article builds, you will get hands-on, not just hand off drawings, • Development testing: design validation, environmental, vibration, thermal, and ingress protection testing, • DFM/DFA collaboration with manufacturing engineering to ensure designs are producible and scalable, • FEA and CFD analysis to validate designs analytically before committing to hardware, • Managing and releasing engineering drawings, GD&T callouts, and BOMs in Solidworks PDM, • B.S. or M.S. in Mechanical Engineering, • 5+ years of experience in product development with demonstrated ownership of hardware from prototype to production, • Strong fundamentals in heat transfer, fluid mechanics, solid mechanics, and mechatronics, • Expert-level Solidworks proficiency, including drawings with full GD&T, • Hands-on experience with FEA tools (ANSYS, Abaqus, Solidworks Simulation, or similar) and CFD tools (Fluent, Star-CCM+, or similar), • Ability to improvise and test solutions quickly, you prototype on your own, not just through vendors, • Experience designing for high-volume manufacture: injection molding, sheet metal, castings, extrusions, weldments, • Experience with battery systems, power electronics enclosures, or thermal management for high-energy-density products, • Background in marine, defense, automotive, or industrial equipment markets, • Familiarity with IP-rated enclosure design and sealing strategies

Job Locations US-TX-Houston ID 2026-19029 Element has an opportunity for an Associate Engineer to join our rapidly expanding team. As a member of the operations team, the Engineer position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision. The engineer position must be proficient in a number of core business and technical skills including but not limited to compliance to established safety rules, code of conduct, and company policies and procedures. Salary: $60,000- $70,000/yr DOE Closely involved - as a contributing team member - with a variety of assignments with the laboratory • Accountable for technical activities of a limited scope and may attain additional responsibilities for release of standard and/or routine data to clients, • Possess the ability to effectively contribute to technical presentations and communications within the engineering discipline Project management of customer projects, including both standardized and custom tests. * Support process improvement initiatives across multiple testing departments, included but not limited to: Fixture design, specimen design, SOP development, and material selection. • Working knowledge of laboratory safety, • Possess a recognized scientific, technical or engineering qualification to a degree level, • Preferred significant field experience leading to comparable engineering knowledge, competencies and skill, • A Bachelors of Science degree in a science or testing related field, • In-depth understanding of testing concepts, • Ability to analyze and compile testing data from the tests performed, • Possess strong computer skills, • Intermediate to advanced mathematical skills. Ability to apply concepts of algebra, geometry, and statistics required, • Frequency of required physical force: Minimum (moderate), • Lifting requirements: lifting <50 lbs. often and >50 lbs. on occasion, • Ability to stand on feet for long periods of time, • Ability to lift 50+lbs periodically, • Ability to work on well-defined issues, standard and/or routine tests, with limited supervision in accordance with approved procedures, methods, customer specifications and standards, • Adapt at managing job priority and work time in accordance with targets/goals set by supervisor, • Under the close guidance of advanced Engineers in the laboratory, work on well delineated technical issues including standard and routine analysis, • Define work experience that has impact on the day to day technical decisions made on timely delivery of laboratory testing services and customer support, • Strong technical knowledge When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming "the world's most trusted testing partner". All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws.

Who We Are: Venus Aerospace is revolutionizing rocket engine propulsion. With the first generational leap in rocket engine technology since Apollo, our proprietary Rotating Detonation Rocket Engine and Venus Detonation Ramjets deliver historic efficiency and performance across aerospace applications. We are building the next generation of propulsion platforms that enable breakthrough capabilities in space, defense, and commercial high-speed flight. Our team thrives on solving the toughest engineering challenges and pushing the boundaries of what's possible in aerospace. At Venus, we're looking for bold engineers and innovators who want to make history and redefine the future of propulsion. The Role: Manufacturing Engineer We are seeking a Manufacturing Engineer to assist with the development and optimization of manufacturing processes for our advanced propulsion systems. This role involves close collaboration with cross-functional teams to ensure efficient, high-quality production aligned with aerospace standards. • Design Optimization: Assess designs for DFMA: Check CAD models and drawings for tolerancing (GD&T) and manufacturability, ensuring adherence to industry regulations and standards. Design tooling as necessary., • BOM Management: Validate MBOM structure to ensure correct assemblies, parts, and quantities., • Change Management: Review, approve, release and distribute technical data for manufacturing. Maintain comprehensive documentation for manufacturing processes., • Cross-Functional Collaboration: Work closely with design, engineering, test and analysis teams to integrate design specifications seamlessly into manufacturing workflows., • Supplier Engagement: Manage relationships with suppliers and vendors to source and qualify materials for specialized aerospace applications., • Leadership: Provide training and support to production personnel to ensure proper execution of manufacturing processes., • Continuous Improvement: Identify opportunities for process enhancements and lead initiatives to implement best practices in manufacturing operations., • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or a related field., • Approximately 3 years in manufacturing engineering, preferably within the aerospace sector, with a focus on propulsion systems., • Proficiency in CAD software (e.g., SolidWorks, NX, CATIA), experience with JIRA and Atlassian tools, CAM software and familiarity with lean manufacturing methodologies., • Strong understanding of AS9100 standards, ASME drawing standards, aerospace materials, and propulsion system components., • Excellent problem-solving abilities, strong communication skills, and a collaborative mindset., • Experience with Rotating Detonation Rocket Engines (RDRE) or similar advanced propulsion technologies., • Familiarity with advanced manufacturing and additive manufacturing techniques along with their application in aerospace component production.

LIVING OUR VALUES All associates are guided by Our Values. Our Values are the unifying foundation of our companies. We strive to ensure that every decision we make and every action we take demonstrates Our Values. We believe that putting Our Values into practice creates lasting benefits for all of our associates, shareholders, and the communities in which we live. A Day in The Life We're seeking a DevSecOps Engineer to own the secure delivery pipeline and platform foundations across cloud environments. You'll design and automate IAM, infrastructure as code (Terraform), CI/CD (GitHub Actions), and Kubernetes operations, embedding security controls by default and enabling development teams to ship quickly and safely. What You'll Do • Design and implement least-privilege IAM (users, roles, policies, SSO/OIDC) across cloud and Kubernetes (RBAC, service accounts, Pod Security Standards)., • Build/maintain Terraform modules and environments (prod/non-prod), enforce drift detection, and apply policy-as-code (OPA/Conftest, Sentinel, Checkov/tfsec)., • Own GitHub Actions pipelines (build/test/scan/sign/release), reusable workflows, environment protections, required reviews, and deployment gates., • Operate Kubernetes clusters (EKS/AKS/GKE or on-prem): cluster lifecycle, Helm/Kustomize, GitOps (Argo CD/Flux), NetworkPolicies, ingress, secrets., • Embed software supply chain security: SCA/SAST/DAST, container/IaC scanning, SBOM generation, image signing (Cosign), provenance (SLSA)., • Implement secret management (Vault/Secrets Manager/KMS), key rotation, and secure parameter stores., • Stand up observability: metrics, logs, traces (Prometheus/Grafana/ELK/Cloud-native), and actionable alerts., • Automate incident response runbooks; support on-call for platform/security events., • Partner with AppSec and product teams on threat modeling, secure design reviews, and remediation., • Contribute to compliance initiatives (SOC 2/ISO 27001) with evidence automation and configuration baselines., • Drive cost, reliability, and capacity guardrails; champion platform DX and documentation. Required Qualifications • 8+ years in DevOps/Platform/SRE with a security-first mindset., • Strong IAM design (cloud + Kubernetes RBAC), OIDC/OAuth2, SSO/IdP (e.g., Okta/Azure Entra)., • Production Terraform experience (workspaces, modules, remote state, CI-driven plans/applies)., • Hands-on GitHub Actions (self-hosted runners, OIDC to cloud, environments/protections, matrix builds)., • Operating Kubernetes in production (Helm, networking, ingress, autoscaling, upgrades, backups/DR)., • Practical use of security scanners (e.g., Wiz, Trivy/Grype, Dependabot, Checkov/tfsec), and policy-as-code., • Proficient with one or more clouds (AWS), Linux, containers, and networking fundamentals., • Strong scripting in Python or Bash; Infrastructure troubleshooting and debugging skills., • HashiCorp Vault, keeper/Kyverno, service mesh (Istio/Linkerd), or CNI like Cilium., • GitOps at scale (Argo CD multi-app/multi-cluster), progressive delivery (Argo Rollouts/Flagger)., • Experience with SIEM, detections, or security data pipelines., • Knowledge of data protection (PII), tokenization, and regional compliance. The physical requirements described here are representative of those that must be met by an associate to successfully perform the essential functions of the job. While performing the duties of the job, the associate is required on a daily basis to analyze and interpret data, communicate, and remain in a stationary position for a significant amount of the work day; and frequently access, input, and retrieve information from the computer and other office productivity devices. The associate is regularly required to move about the office and around the corporate campus. The associate is occasionally required to travel to other sites, including out-of-state, where applicable, for business. The associate must frequently move up to 10 pounds and occasionally move up to 25 pounds. Work Environment The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. While the job is generally performed in an office environment, the associate is occasionally exposed to wet and/or humid conditions, areas in which moving mechanical parts, fumes, toxic or caustic chemicals are present, and outside weather conditions. The noise level in the office environment is typically quiet, but the associate may be occasionally exposed to loud noise levels. Travel Required Minimal travel is required for this position (up to 20% of the time and on a domestic basis). The Friedkin Group and its affiliates are equal opportunity employers and maintain drug-free workplaces by conducting pre-employment drug testing. #LI-TW1

Who We Are Venus Aerospace is revolutionizing rocket engine propulsion. With the first generational leap in rocket engine technology since Apollo, our proprietary Rotating Detonation Rocket Engine and Venus Detonation Ramjets deliver historic efficiency and performance across aerospace applications. We are building the next generation of propulsion platforms that enable breakthrough capabilities in space, defense, and commercial high-speed flight. Our team thrives on solving the toughest engineering challenges and pushing the boundaries of what's possible in aerospace. At Venus, we're looking for bold engineers and innovators who want to make history and redefine the future of propulsion. The role: Senior Structures Engineer We are seeking a Senior Structures Engineer to lead structural development for aerospace vehicles from a clean sheet. This is a highly interdisciplinary role requiring a strong technical foundation and excellent communication skills. You will help define internal standards and tools, work cross-functionally with other departments, and play a key role in building the structures team and its processes. This position is on-site in Houston, TX and may require travel to support operation, vendors, or other activities. You will be working in a developing start-up environment requiring flexibility and a willingness to take on a wide variety of tasks. • Complete structural design and analysis across a variety of aerospace vehicle types and related hardware, • Perform fatigue, buckling, stability, and general strength assessments via hand calcs and FEA (ANSYS preferred), • Own CAD models in NX and/or CATIA, including large assemblies and release processes, • Define loads in coordination with GNC, propulsion, avionics, and systems teams, • Support structural test campaigns and contribute to flight qualification plans, • Develop internal processes, standards, and documentation for the growing team, • Help team members and others at Venus learn and grow, • Use TeamCenter, Dassault systems software, Jira, and Confluence for configuration control and program collaboration, • Contribute to a collaborative, communicative team culture - strong interpersonal and conflict resolution skills are essential, • B.S. in Aerospace or Mechanical Engineering, • 5+ years of structural engineering experience, • 3+ years of FEA experience (ANSYS preferred), • 3+ years of CAD experience (NX preferred), including large assembly management, • Demonstrated proficiency in hand calculations and first-principles analysis, • Familiarity with fatigue analysis methods and principles, • Strong communication, collaboration, and team-building skills, • U.S. Person eligible to work on ITAR-restricted programs, • Experience with random vibration (derivation from flight data or specifications), vibration testing, • Experience with design for manufacturing and producibility, • Loads development including coupled loads analysis, • Working knowledge of materials, buckling, structural joints, damage tolerance, and vibration, • Experience creating or contributing to engineering standards and internal procedures, • Background in multi-stage rockets, aircraft, or spacecraft, • Flight qualification and structural test experience

ABOUT ENOVIS Enovis Corporation (NYSE: ENOV) is an innovation-driven medical technology growth company dedicated to developing clinically differentiated solutions that generate measurably better patient outcomes and transform workflows. Powered by a culture of continuous improvement, global talent and innovation, the Company's extensive range of products, services and integrated technologies fuels active lifestyles in orthopedics and beyond.For more information about Enovis, please visit ___. What You'll Do At Enovis we pay attention to the details. We embrace collaboration with our partners and patients, and take pride in the pursuit of scientific excellence - with the goal of transforming medical technology as we know it. Because that's how we change the lives of patients for the better. And that's how we create better together. Why work at Enovis? ___. As a key member of the Foot & Ankle Research & Development team you will play an integral part in helping Enovis drive the medical technology industry forward through transforming patient care and creating better patient outcomes. Job Title: Sustaining Engineer Reports To: Manager, Product Development Location: Houston, TX Job Title/High-Level Position Summary: The Sustaining Engineer will primarily be responsible for providing technical support to RA/QA/MFG for NCMR, CAPA/HHE, validations and complaint investigations. Additionally, the sustaining engineer will own sustaining/product improvement projects and provide support to upper-level engineers in all aspects of new product development projects from proposal to final design/release, including design transfer support (internal and supplier transfer). The engineer will work with a cross-functional product team consisting of upper-level product development engineers, marketing product managers, manufacturing engineers, regulatory and QA engineers in the design, development, and design transfer of surgical instruments and implants. Key Responsibilities: • Supports various sustaining engineering projects including line extensions and supplier/internal manufacturing transfer projects, • Supports new product development projects from proposal to final design/release, • Creates product designs and documentation used to substantiate those devices (i.e. risk assessments, verification/validation activities, design review documentation, etc.), • Develops detailed engineering drawings using 3-D Modeling to document designs and design changes (SolidWorks), • Confers with cross-functional team to identify tasks and requirements (Product Development, Manufacturing Engineers, Quality Engineers, Marketing, Purchasing and Regulatory Affairs), • Maintains all documentation necessary for a Design History File (DHF), including Design Input Documents, Design Validation Plans/Reports, Test Protocols/Reports, and Design Input/Output Matrix., • Provides technical support and review for Non-Conforming Material Reports and product complaint investigations., • Provides technical support and review for Corrective and Preventative Actions and Health Hazard Evaluations. Competency: To perform the job successfully, an individual should demonstrate the following competencies: • Analytical - Synthesizes complex or diverse information., • Design - Demonstrates attention to detail., • Problem Solving - Identifies and resolves problems in a timely manner; gathers and analyzes information skillfully; develops alternative solutions; uses reason even when dealing with emotional topics., • Project Management - Communicates changes and progress., • Technical Skills - Assesses own strengths and weaknesses; pursues training and development opportunities; strives to continuously build knowledge and skills., • Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens and gets clarification., • Written Communication - Writes clearly and informatively; varies writing style to meet needs; able to read and interpret written information. Writes detailed test protocols/reports., • Quality Management - Looks for ways to improve and promote quality; demonstrates accuracy and thoroughness., • Business Acumen - Understands business implications of decisions., • Diversity - Shows respect and sensitivity for cultural differences; promotes a harassment-free environment., • Judgment - Exhibits sound and accurate judgment; includes appropriate people in decision-making process., • Safety and Security - Observes safety and security procedures; reports potentially unsafe conditions; uses equipment and materials properly., • Demonstrates commitment to the Enovis Compliance & Ethics Program, the Enovis Code of Conduct, the Enovis Sales and Marketing Code of Conduct, the AdvaMed Code of Ethics, and all supporting and applicable regulations, policies and procedures., • Demonstrates commitment to the Enovis Values, Mission and Vision. Currently, Enovis does not provide sponsorship for employment visas (e.g., H-1B) and will not offer such sponsorship in the future. Applicants must already have full-time work authorization in the United States, both now and in the future, without requiring sponsorship. Minimum Basic Qualifications: • Bachelor's degree in an engineering discipline, • 3-5 years experience in medical devices and/or orthopedics preferred., • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Ability to prepare product reports by collecting, analyzing, and summarizing information and trends., • Ability to assist in the 510(k) application process by providing official test batch and qualification information for FDA review, • Must be experienced in MS Word, Excel and Project., • Experience with 3D CAD packages (SolidWorks preferred) Work Environment / Physical Demands: • Climate controlled workspace, • Typical warehouse environment, including the ability to lift up to 25 lbs., • Physical Demands: standing, sitting, climbing, crouching/kneeling, lifting, carting, etc. "Creating better together". It's the Enovis purpose, and it's what drives us and empowers us every day on a global scale. We know that the power to create better - for our customers, our team members, and our shareholders - begins with having the best team, pursuing common goals, operating at the highest levels, and delivering extraordinary outcomes. What does creating better together mean to us at Enovis? Discover the "why" behind our purpose, values and behaviors: We offer a comprehensive benefits package that includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Spending and Savings Accounts, • 401(k) Plan, • Vacation, Sick Leave, and Holidays, • Income Protection Plans, • Discounted Insurance Rates, • Legal Services Join us in creating better together. EQUAL EMPLOYMENT OPPORTUNITY Enovis provides equal employment opportunities based on merit, experience, and other work-related criteria without regard to race, color, ethnicity, religion, national origin, sex, age, pregnancy, disability, veteran status, or any other status protected by applicable law. We also strive to provide reasonable accommodation to employees' beliefs and practices that do not conflict with Enovis policies and applicable law. We value the unique contributions that every employee brings to their role with Enovis.

We Are Accenture is recognized as a global leader in AI and cloud transformation, helping businesses across industries migrate, manage, and optimize their cloud environments. Through partnerships with leading cloud providers such as Nvidia, AWS, Microsoft Azure, and Google Cloud, Accenture offers end-to-end services that drive innovation and business agility. The Cloud Advisory Practice focuses on helping organizations define, plan, and implement innovative AI and cloud strategies that drive business value. Leveraging deep expertise across cloud platforms and technologies, this practice works collaboratively with clients to design scalable, secure, and resilient cloud environments. The practice offers guidance in key areas such as agentic AI infrastructure & hosting, modern cloud foundation, security and resiliency, full-stack FinOps, and cloud-native development approaches, ensuring that clients achieve agility, operational efficiency, and long-term growth. By aligning AI and cloud initiatives with business goals, the practice helps organizations realize the full potential of cloud innovation while navigating industry-specific challenges and regulations You Are Most Product Managers, engineers, and designers get to build software systems. Very few get to say with a straight face: "I'm reinventing banking." Or hospitality, or logistics, or insurance. We're combining Product, technology, industry expertise, and entrepreneurial experience to massively disrupt our clients' core businesses. We partner with our clients to propel them into the future and to help create better products and experiences for everyone. The work will not always be linear or well defined. Adopting new ways of working-particularly as tools and practices continue to evolve-can be uncomfortable at times. We are looking for individuals who are comfortable operating in that space, who are curious, adaptable, and willing to help shape how teams build products as the landscape changes The Work We're doing this by working with leaders in the industry, across Accenture teams, and technology partnerships to help clients re-invent themselves and re-imagine their services as products. Our Cloud Strategy team is made up of experienced professionals who bridge the divide between product and technology. We create space for our clients to collaborate, transform and grow while maintaining a focus on delivering business value through technology driven products. * In this role, you will partner closely with clients to design, build, release, and evolve software products and digital experiences. You will operate at the intersection of business strategy, technology, and product design-helping translate strategic intent into solutions that can be built, scaled, and sustained. * As a Product Engineer, you will bring modern, AI-enabled approaches into the way products are conceived and delivered. This includes applying these tools and techniques across product discovery and solutioning, technical event storming, requirements definition, design, and software development. AI is part of how we work to accelerate learning, improve quality, and evolve products over time, not a separate specialty or isolated phase. * You will act as a connective voice between business needs, technical architecture, and the creative elements that make products usable and competitive. Leveraging established playbooks for domain modeling, detailed design and specification, and continuous delivery, you will help teams navigate ambiguity and turn complex problems into clear, actionable solutions. * You will collaborate with other Accenture practitioners to build and lead cross-functional teams, experiment thoughtfully, and deliver innovative solutions that meet real business needs. Travel may be required for this role. The amount of travel will vary from 0 to 100% depending on business need and client requirements. Here's what you need * Bachelor's degree or equivalent (minimum 12 years) work experience. (If Associate's Degree, must have minimum 6 years work experience) * Minimum of 2 years of hands-on experience in a professional setting within an agile team * Minimum of 2 years of hands-on experience as a product owner / business analyst- decomposing epics to write user stories and managing a backlog to business value * Minimum of 1 years of experience in the following: * Designing and facilitating small scale design workshops to drive outcomes (Domain Driven Design, Event Storming, Design Thinking) * Refining and incorporating a Strategic Domain model, with products aligned to strategic objectives. * Guiding teams in translating the vision into actionable goals and features, serving as a bridge between stakeholders, designers, developers, and other team members. * Presenting and explaining product management, agile methodologies, and coaching techniques to stakeholders * Across the entire product delivery lifecycle, taking the Enterprise Domain Model as input to alignment on domain boundaries & scopes to define how functions and processes are executed against the domain model. Bonus Point if you have * Experience with multiple agile and scrum frameworks (Agile, Scrum, SAFe) and software (JIRA, Azure DevOps, Trello, etc.) * Experience using Agentic AI to complete work related tasks * Experience defining product vision for AI-native solutions that transform core business processes * Experience defining success metrics for AI Products * Experience in innovative workshop design and facilitation * Experience with backlog creation for new strategic initiatives * Experience with Domain Driven Design * Familiarity with the stages and concepts of Software Delivery Life Cycle (SDLC) * Experience designing modern architecture patterns including API and Event Driven Architectures * Experience with Behavior Driven Development/Test Driven Development, with hands-on Gherkin experience in specification documentation * Experience with taking product strategy and refining it through the delivery and deployment lifecycle * Experience with go-live and day 2 operational requirements: Ongoing operational experience is a plus * Familiarity with Amazon Web Services, Google Cloud Platform, or Azure; namely choosing platform components and assembling application and runtime architecture (Alternative cloud provider experience is applicable) Compensation at Accenture varies depending on a wide array of factors, which may include but are not limited to the specific office location, role, skill set, and level of experience. As required by local law, Accenture provides a reasonable range of compensation for roles that may be hired as set forth below.We anticipate this job posting will be posted on 01/28/2026 and open for at least 3 days. Accenture offers a market competitive suite of benefits including medical, dental, vision, life, and long-term disability coverage, a 401(k) plan, bonus opportunities, paid holidays, and paid time off. See more information on our benefits here: U.S. Employee Benefits | Accenture () Role Location Annual Salary Range California $70,350 to $205,800 Cleveland $59,100 to $164,600 Colorado $63,800 to $177,800 District of Columbia $68,000 to $189,300 Illinois $59,100 to $177,800 Maryland $63,800 to $177,800 Massachusetts $63,800 to $189,300 Minnesota $63,800 to $177,800 New York $66,300 to $205,800 New Jersey $68,000 to $205,800 Washington $80,200 to $189,300 Requesting an Accommodation Accenture is committed to providing equal employment opportunities for persons with disabilities or religious observances, including reasonable accommodation when needed. If you are hired by Accenture and require accommodation to perform the essential functions of your role, you will be asked to participate in our reasonable accommodation process. Accommodations made to facilitate the recruiting process are not a guarantee of future or continued accommodations once hired. If you would like to be considered for employment opportunities with Accenture and have accommodation needs such as for a disability or religious observance, please call us toll free at 1 (877) 889-9009 or send us an email or speak with your recruiter. Equal Employment Opportunity Statement We believe that no one should be discriminated against because of their differences. All employment decisions shall be made without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by federal, state, or local law. Our rich diversity makes us more innovative, more competitive, and more creative, which helps us better serve our clients and our communities. For details, view a copy of the Accenture Equal Opportunity Statement () Accenture is an EEO and Affirmative Action Employer of Veterans/Individuals with Disabilities. Accenture is committed to providing veteran employment opportunities to our service men and women. Other Employment Statements Applicants for employment in the US must have work authorization that does not now or in the future require sponsorship of a visa for employment authorization in the United States. Candidates who are currently employed by a client of Accenture or an affiliated Accenture business may not be eligible for consideration. Job candidates will not be obligated to disclose sealed or expunged records of conviction or arrest as part of the hiring process. Further, at Accenture a criminal conviction history is not an absolute bar to employment. The Company will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. Additionally, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Company's legal duty to furnish information. California requires additional notifications for applicants and employees. If you are a California resident, live in or plan to work from Los Angeles County upon being hired for this position, please click here for additional important information. Please read Accenture's Recruiting and Hiring Statement for more information on how we process your data during the Recruiting and Hiring process.

Job Description Lead Powertrain Engineer (powertrain & school bus experience required) Are you ready to be part of a company that's not just talking about the future, but energetically shaping it? Join the Microvast Team (NASDAQ: MVST), a technology innovator that designs, develops and manufactures lithium-ion battery solutions. Founded in 2006 and headquartered in Stafford, TX, Microvast is renowned for its cutting-edge cell technology and its vertical integration capabilities which extend from core battery chemistry (cathode, anode, electrolyte, and separator) to battery packs. By integrating the process from raw material to system assembly, Microvast has developed a family of products covering a broad breadth of market applications. More information can be found on the corporate website: If you’re ready to be part of a company that’s not just adapting to change, but driving it, Microvast is the place for you. Apply now and electrify your career with a true leader in the global energy transformation. Job Description Microvast is seeking a leading school bus powertrain engineer to join our team who can bring their fresh perspectives and experiences to the team. If you are zealous about an electrified future and looking for a place that values your curiosity, passion, and desire to learn, you have come to the right place. Key Responsibilities • Provide technical, and cross-functional support for electric school bus powertrain engineering activities, including requirements definition, architecture design, mechanical integration, software implementation, HIL testing, field testing, system validation, and software release management., • Collaborate with the global teams and upper management to identify and develop electrical powertrain architecture and requirements for school bus., • Manage electrical powertrain development plans, milestones, budgets, and schedules in accordance with technology roadmaps., • Provide technical layouts and proposals to customer inquiries, • Coordination of the system interfaces between the individual departments as well as coordination of the same with the customer, • Preparation of technical documentation, • Support methodical root cause analysis and resolve issues in part performance, • Handle engineering tools, • Support for the commissioning of products internally or at the customer's (on-site or remotely), • Support and managing prototypes, • Bachelor’s degree in electrical engineering, mechanical engineering, mechatronics, computer engineering, or a related technical field, or equivalent practical experience, • 3+ years of experience in e-mobility, automotive electronics, energy storage systems, or commercial vehicle systems, • Good technical understanding of electric powertrain systems for Mid/Heavy-Duty commercial vehicle or school bus., • Familiarity with product development processes (e.g., V-model, APQP, IATF16949, or similar), • Experience with engineering tools such as CANalyzer, Matlab/Simulink, or similar diagnostic and analysis tools, • Proficiency in MS Office and engineering documentation, • Strong analytical and problem-solving skills, • Structured, proactive, and hands-on working style Annual salary + benefits Pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience. The total compensation package for this position may also include other elements dependent on the position offered. Details of participation in these benefit plans will be provided if an employee receives an offer of employment. Applicants for employment at Microvast must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Microvast is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to any factor, including veteran status and disability status, protected by applicable federal, state or local laws. Microvast is also committed to working with and providing reasonable accommodations to individuals with disabilities. Please let your recruiter know if you need an accommodation at any point during the interview process. Privacy is a top priority for Microvast. We build it into our products and view it as an essential part of our business. To understand more about the data we collect and process as part of your application, please view our Privacy Policy - Microvast.

Job DescriptionSalary: We are seeking a Senior Pipe Stress Engineer to join our project team in Houston, TX. Responsibilities: Project Leadership • Lead the full piping engineering scope for assigned projects, including coordination with international execution centers., • Oversee all pipe stress analysis activities for both new projects and existing facility issues., • Develop, manage, and enforce project schedules, budgets, and deliverable requirements., • Monitor project progress and provide consistent reporting throughout execution., • Collaborate with project managers, engineering teams, and clients to clarify objectives and define scope., • Office location is Houston, TX. Piping Design and Engineering • Provide expert guidance on complex piping systems, applying sound engineering judgment and industry best practices., • Review piping layouts, isometrics, and 3D models, including work produced by global offices., • Ensure all designs comply with project specifications, applicable standards, and governing codes (ASME, API)., • Perform stress analysis, support material selection, and optimize pipe routing., • Support procurement activities for piping components such as specialty items, supports, and valves., • Oversee the checking and release of piping deliverables for downstream use. Team Supervision • Mentor, supervise, and support junior engineers and designers., • Lead routine design reviews and ensure alignment across engineering disciplines., • Promote a collaborative, efficient, and highperforming team culture. Coordination and Communication • Work closely with civil, structural, mechanical, electrical, instrumentation, and process safety teams to ensure proper integration of piping systems., • Review and approve vendor drawings and documentation., • Participate in design reviews, HAZOP sessions, and project presentations., • Respond to technical inquiries and manage design changes effectively. Quality Assurance • Implement quality control procedures and conduct periodic design audits., • Confirm that all deliverables meet project requirements and regulatory expectations., • Identify and address risks or issues that could affect project performance. Qualifications Education & Experience • Bachelors degree in Mechanical Engineering (preferred)., • Minimum of 10 years of experience in piping layout, design, and pipe stress analysis within the petrochemical sector, including at least 3 years in a leadership capacity. Technical Skills • Proficiency with design review tools such as SmartPlant Review and Navisworks., • Strong understanding of piping codes and standards (ASME, ANSI, API, PIP)., • Competence in material identification and selection., • Extensive experience with Caesar II and preparation of pipe stress analysis reports for common piping systems., • LNG project experience is preferred., • Knowledge of AIV/FIV principles and screening methods is advantageous., • Experience developing piping material class specifications is preferred., • Familiarity with NDE and piping system testing requirements is preferred., • Understanding of valve applications and specifications is preferred. Leadership & Communication • Demonstrated ability to lead and mentor engineering teams., • Strong communication, analytical, and decisionmaking abilities., • Excellent organizational skills and capability to manage multiple priorities. Additional Skills • Familiarity with construction and installation practices., • Understanding of project management fundamentals., • Experience working on international projects or within multicultural teams is a plus. About Novetus Engineering LLCNovetus is unsurpassed in our commitment to achieving our objectives as efficiently as possible. From a piping modification or pump upgrade project to helping to manage a multi-billion-dollar international development, Novetus will field the right team and the right systems to get the work done quickly and fit for the purpose. Novetus combines engineering workflow automation expertise with an experienced team of engineers and project managers to execute projects with exceptional efficiency. An engineering company focused on the oil, gas, and petrochemical industry, Novetus is based in Houston, Texas and is privately held.

Job DescriptionWe are seeking a Senior Optical Engineer to join our Optical NPI team to support the development and scaling of next-generation optical switch products from New Product Introduction (NPI) through high-volume manufacturing. This role focuses on the optical subsystem architecture, performance margins, tolerances, contamination sensitivity, and system stability, and will drive validation, characterization, and production readiness from prototypes through product maturity. This is a highly cross-functional role working closely with NPI, test engineering, manufacturing teams, and customers to ensure robust optical performance and scalable production solutions. Key Responsibilities • Lead deep-dive investigations of complex optical path issues, identifying root causes and driving improvements across design, test, fixtures, and manufacturing processes through structured experiments and DOE methodologies., • Partner with NPI and Test Engineering teams to develop manufacturable optical measurement strategies, including selection and integration of optical test equipment for product development and production environments., • Collaborate with customers and internal teams to define and implement optical inspection and cleaning processes to improve yield, reduce retest rates, and maintain optical performance standards., • Support Site Acceptance Testing (SAT) for automated optical inspection and cleaning systems by defining acceptance criteria, conducting qualification and correlation studies, and closing readiness gaps prior to production release., • Qualify optical test equipment and stations through measurement system analysis, including Cg/Cgk, GR&R, and station-to-station correlation studies., • Analyze production and test data to identify performance gaps and implement corrective actions prior to mass production., • Bachelor’s or Master’s degree in Optical Engineering, Electrical Engineering, Physics, or a related technical field., • 5+ years of experience in optical engineering, optical testing, or optical manufacturing/NPI supporting complex hardware systems in laboratory or production environments., • Proven experience troubleshooting optical path issues, including fiber connectors, end-face quality, contamination control, and optical signal integrity., • Hands-on experience implementing optical measurement systems, including automation, calibration, data logging, and traceability., • Experience defining and validating optical inspection and cleaning processes in collaboration with cross-functional or customer teams., • Strong experimental and analytical skills with experience conducting structured experiments (DOE) and applying data-driven decision making., • Experience with optical switching products or high-speed networking optics, including fiber-based interconnects, optical modules, or optical assemblies., • Familiarity with high-speed optical link testing and performance metrics such as BER, eye diagrams, jitter margin, and signal integrity analysis., • Experience supporting equipment qualification and production readiness, including SAT planning and execution., • Working knowledge of measurement system capability analysis including Cg/Cgk, GR&R, and correlation studies. Foxconn Industrial Internet is an Equal Opportunity Employer and considers applicants without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, veteran status, genetic information, or any other characteristic protected by applicable federal, state, or local law. Powered by JazzHR 0sIuQeappH

This Jobot Job is hosted by: Tracy Hann Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $80,000 - $90,000 per year A bit about us: We are a specialized manufacturer delivering engineered solutions that protect people, industrial operations, and the environment — playing an active role in the energy transition and environmental stewardship on a global scale. We are looking for a Quality Engineer to lead quality assurance and control efforts across our custom-engineered equipment projects. This role plays a key part in ensuring our products meet customer specifications, industry standards, and internal quality expectations—from fabrication through final testing. Unfortunately, we cannot offer VISA sponsorship at this time. Why join us? • Generous PTO, • 401k with Match, • Medical - high deductible or PPO, • Dental, vision, • Virtual Medicine, • Prescription Drug Coverage, • Wellness programs and discount, • HSA/FSA, • Retirement, • Basic Life & Accidental Death & Dismemberment Insurance, • Short-Term and Long-Term disability, • Employee assistant program, • Employee stock purchase plan Why this role • Work on custom, engineered industrial systems (not repetitive production), • High visibility across engineering, manufacturing, and customer teams, • Opportunity to drive process improvements and quality standards in a growing organization, • Be part of a company focused on environmental impact and industrial sustainability Job Details This is a hands-on, cross-functional position where you’ll work closely with engineering, operations, suppliers, and customers to ensure quality is built into every stage of the process. You’ll be responsible for: • Developing and maintaining QA/QC processes and standards, • Supporting inspections, testing, and product validation, • Partnering with internal teams and external vendors to ensure compliance, • Driving continuous improvement initiatives across manufacturing and quality systems Key Responsibilities • Collaborate with engineering, operations, purchasing, and customer teams to ensure products meet quality, delivery, and performance expectations, • Lead continuous improvement initiatives using Lean and quality methodologies, • Support and maintain the company’s ISO 9001 Quality Management System, • Develop and manage inspection plans, welding procedures, and NDE requirements based on project specifications, • Oversee quality inspections of fabricated equipment, including skids, piping, and structural steel, • Work with suppliers to define, implement, and audit quality standards, • Manage product inspection, testing, and release processes to ensure compliance with design requirements, • Investigate quality issues using root cause analysis (RCA, 5 Whys) and drive corrective actions, • Interface with customers, auditors, and third-party inspectors to ensure quality expectations are met, • Support product testing and validation in collaboration with the design team What We’re Looking For • Bachelor’s degree in Engineering (Mechanical preferred), • 5+ years of experience in quality engineering within industrial or custom equipment manufacturing, • Experience working with structural steel, piping systems, or fabricated equipment, • Familiarity with ISO 9001 quality systems, • Knowledge of ASME codes related to fabrication is a plus, • Experience with Lean Manufacturing and/or Six Sigma principles, • Strong understanding of quality tools (RCA, corrective/preventive actions, etc.), • Proficiency with Microsoft Office tools, • Certifications such as CWI or ASQ (CQE, CQA, etc.) are a plus, • Ability to travel up to ~15% Why this role • Work on custom, engineered industrial systems (not repetitive production), • High visibility across engineering, manufacturing, and customer teams, • Opportunity to drive process improvements and quality standards in a growing organization, • Be part of a company focused on environmental impact and industrial sustainability Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy