Robotics software engineer jobs in Torrance, CaliforniaCreate job alerts

Senior Electrical Engineer (Autonomous Robotics & 3D Systems) Location: El Segundo, CA (On-site 5 days/week) Compensation: $150,000-$200,000 + Equity Requirement: US Residency (ITAR) The Mission We are representing a high-growth, Series B industrial tech startup that is fundamentally redefining how complex hardware is built. Backed by premier Silicon Valley VCs and a global leader in AI computing, this team is developing an autonomous, software-defined factory platform that merges advanced physics with real-time machine learning. We are seeking a Senior Electrical Engineer to design the custom electronics and high-speed control systems that power this large-scale robotic ecosystem. This is a "blank sheet" role for a builder who thrives in technically intense, ambiguous environments. The Challenge • Full-Stack Hardware Ownership: Architecture, component selection, schematic capture, and PCB design support for high-performance systems., • High-Power & High-Speed: Design the electrical backbone for complex systems featuring massive laser arrays, high-speed computer vision, and real-time DAQ., • Compute-Intensive Systems: Develop hardware interfaces for FPGAs and GPUs where timing, throughput, and reliability are the primary constraints., • Rapid Prototyping: Own the "bring-up" and validation phase—taking designs from the bench to a production-scale autonomous factory. The Profile • Experience: 3–8 years of experience owning the full lifecycle of complex electrical hardware from scratch., • Background: Proven track record in high-stakes industries: New Space, Robotics, EV, or Semiconductors., • Technical Skills: Deep proficiency in schematic design, layout, and circuit analysis. Experience with motion control or high-speed data acquisition is highly preferred., • Mindset: A "low-ego" collaborator who can "build the plane while flying it" alongside world-class mechanical and software teams.

Job Description Mechanical Engineer — Space Hardware (Hands‑On, High Ownership) Location: Hawthorne, CA Type: Full‑Time, On‑Site Department: Engineering Compensation This team hires across multiple levels. Final title and compensation depend on demonstrated capability and ownership history. All levels include equity. • Level 1: $90K – $110K, • Level 2: $100K – $125K, • Level 3: $130K – $160K, • Level 4: $150K – $180K About the Role We are building spacecraft hardware at startup velocity. This role is for an engineer who wants to design, build, break, fix, and iterate—not just model. You will own hardware from the first sketch to flight, working directly with founders and technical leads to deliver mechanisms and assemblies that survive launch, vacuum, thermal extremes, and real‑world mission constraints. If you want to see your work in orbit and thrive in an environment where speed, simplicity, and technical rigor matter, this is the place to do it. What You’ll Do • Own spacecraft hardware end‑to‑end — concept, design, analysis, prototyping, testing, and flight validation, • Design mechanisms and precision assemblies that operate reliably in launch and space environments, • Prototype rapidly using in‑house tools, test rigs, and hands‑on build cycles, • Perform structural, thermal, and bolted‑joint analysis and correlate results with test data, • Integrate mechanical, electrical, and software subsystems into cohesive flight‑ready hardware, • Work directly with machinists, technicians, and test engineers to turn designs into real hardware, • Drive design reviews, test plans, and qualification campaigns with a high degree of ownership What We’re Looking For We are looking for builders, not coordinators. Required • Demonstrated ownership of spacecraft or space‑relevant hardware, • Strong proficiency in CAD (NX, SolidWorks, or similar), • Expertise in bolted joints, fasteners, tolerances, and precision mechanical design, • Experience designing for vibration, shock, thermal, and vacuum environments, • Ability to work hands‑on with hardware, test setups, and rapid prototypes, • Comfort working in fast‑paced, high‑ambiguity environments Strong Pluses • Mechanisms experience (actuators, linkages, deployables, robotics), • MGSE or test rig design, • FEA (structural, thermal, nonlinear, bolted joints), • Experience with flight hardware reviews, qualification, or acceptance testing Not a Fit To help candidates self‑select, this role is not aligned with: • manufacturing engineers, • process engineers, • tooling‑only backgrounds, • aircraft‑only design experience, • documentation‑heavy or standards‑focused roles Who Thrives Here • Engineers who want to touch hardware every day, • People who move fast, iterate aggressively, and own outcomes, • Builders who enjoy solving hard problems with simple, elegant solutions, • Individuals who want to see their work in orbit, not in a binder Benefits • 100% coverage of base medical, dental, and vision, • HSA, FSA, 401K, commuter benefits, • Unlimited PTO with a two‑week minimum, • Daily catered lunches, • High‑impact work with hardware that flies

Job DescriptionSummary/Objective: The Sr. Application Engineer will lead the design and development of application software and integration objects for our WMS (Warehouse Management System) to meet the requirements of our internal operations and customers. You will lead the efforts to connect our WMS with outside customers and internal applications. The Sr. Application Engineer is responsible for developing custom solutions to enhance our business workflows. You will interact with, and advise, the Operations teams and other internal customers to ensure our WMS is meeting their business standards. The Sr. Application Engineer will serve as the lead in setting strategy for business solutions required to guarantee the success of our customer implementations and operational processes. Essential Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Partner with various non-technical managers to understand complex, dynamic business rules/processes and then create detailed, and comprehensive documentation., • Lead WMS projects, upgrades and integrations with ERP, TMS and warehouse automation systems, • Identify root cause of persistent issues and recommend permanent solutions., • Works with functional areas to identify and develop system driven optimizations, • Develop APIs and other integration objects to connect applications and warehouse automation, • Develop software code and stored procedures to transform data and support custom business flows as needed, • Create and execute SQL queries to persist data; reporting; data transformation and performance monitoring, • Analyze our customer requirements and design integration flows to persist data into our WMS schemas, • Quickly change direction when working on multiple projects or issues., • Deliver professional, clear and effective instructions to audiences at different levels within the organization and guide completion of tasks to ensure all steps are followed., • Effectively communicates relevant information to superiors., • Servant Leadership, • Passion for Excellence, • Integrity, • Resilient, • Intense Safety Focus, • TrustRequired Education and Experience, • Bachelor’s degree (B.A./B.S.) preferred or 5-7 years of direct, related experience., • Minimum of 3 years’ experience with configuring/modifying accounts within SCALE (mandatory)., • Proven track record in WMS configuration, implementation and support, • Proficiency in SQL and reporting tools (Microsoft SSRS, PowerBI), • Experience with EDI, API and data integration, • Ability to develop software code objects to support business flows and transform/persist data, • Experience with warehouse automation/robotics and integration to the WMS host, • Very strong written, verbal and interpersonal communication skills., • Ability to manage multiple priorities, commitments, and projects in fast-paced dynamic environment., • Strong analytical skills., • Strong work ethic with a high degree of flexibility to work in an ambiguous environment. Powered by JazzHR apqTyrtuEI

Job DescriptionCX2 is a next-generation defense technology company founded to deliver spectrum dominance for the United States and our allies. CX2’s AI-enabled hardware and software platforms detect, disrupt and defend the electromagnetic spectrum across land, air, sea and space domains. We are seeking a self starting and innovative Manufacturing Engineer who wants to drive manufacturing initiatives and improvements. You will touch the entire process from DFM and commissioning, through manufacturing ramp and to testing and validation. The ideal candidate combines a strong engineering foundation with hands-on experience in mechanical and electronic assembly production. Process Innovation- Conceptualize, develop, and implement processes and improvements to new and existing products- Analyze production workflows and identify areas for improvement to reduce waste, cost, and downtime.- Develop and document process parameters, SOPs, and quality control standards. Drone Production Support- Work closely with engineering and production teams to resolve issues related to electromechanical assemblies and validation, such as mechanical assemblies, CNC machined components, carbon fibre layup, Final assembly and unit testing.- Facilitate day to day production support of drone production. - Mentor and guide technicians and engineers to best engineering practices to meet AS9100D ISO9001 defense manufacturing requirements.- Provide technical support during new product introduction (NPI) and engineering change implementations. Tooling & Equipment- Specify and design tools, jigs, and fixtures to streamline assembly and manufacturing.- Manage procurement and validation of new equipment, including FAT and SAT. Cross-functional Collaboration- Collaborate with R&D, Product Design, Quality Assurance, and Supply Chain teams to ensure manufacturability and scalability.- Participate in DFMA (Design for Manufacturing and Assembly) reviews during product development.- Coordinate with vendors and contract manufacturers to ensure consistent production quality. Quality and Testing- Define and create in-process validation and testing processes- Lead root cause analysis and corrective action plans for final drone assembly and mechanical drone components.- Ensure workplace safety and compliance with applicable standards and regulations (e.g., OSHA, ISO, RoHS).Required Qualifications • Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering,Industrial Engineering, Aerospace Engineering, or equivalent demonstrable experience, • A minimum of 2 years' of experience with electro-mechanical manufacturing and assembly in a high-quality industry like Aerospace., • Familiarity with final assembly of electro-mechanical assemblies such as motors, drone controllers, antenna assembly or similar., • Familiarity with lean manufacturing, Six Sigma, Kaizen, or other continuous improvement methodologies., • Proven analytical, troubleshooting, and project management skills., • Experienced presenter with demonstrated communication and documentation abilities., • Ability to work extended hours/weekends for mission critical deadlines.ITAR Regulations, • To conform to U.S. Government technology export regulations, including the International Traffic in Arms Regulations (ITAR), applicant must be a US Citizen, Green Card holder, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Bonus Points, • Experience with drone/robotics manufacturing., • Strong CAD/CAM skills for tooling and fixture design., • Experience with aerospace production testing, validation and calibration calibration, thermal/vibration testing, or any other sort of validation/acceptance testing prior to shipping strongly preferred., • Experience commissioning new mechanical assemblies through mid volume production., • Knowledge of manufacturing processes such as injection molding, carbon fibre layup, SMT, PCB assemblies or CNC machining preferred., • Green Belt or Black Belt certification is a plus., • Working knowledge of AS9100D, NADCAP and ISO9001 requirements in defense manufacturing.What We Offer, • Competitive salary, stock options and benefits, including health, vision and dental., • 401K enrollment at 90 days., • Generous PTO + most Federal Holidays observed., • Collaborative and inclusive work environment., • Access to the latest tools and technologies., • High levels of responsibility and autonomy., • Professional growth and development opportunities.

Job Description Avionics / Electrical Engineer – Build Flight-Critical Hardware for Next-Generation Space Systems! El Segundo, CA | On-site Opportunity Summary We are seeking an Avionics / Electrical Engineer to help design and deliver the electrical backbone of advanced spacecraft systems operating in demanding environments. This role is centered around high-performance hardware development, rapid iteration, and deep technical ownership. You will work closely with a small, highly capable engineering team to architect, build, and validate avionics systems that move quickly from concept to flight. This position is ideal for engineers who enjoy working close to the hardware, solving complex multidisciplinary problems, and operating in environments where execution speed and engineering rigor matter equally. You will play a key role in bringing reliable, flight-ready systems online while helping shape system architecture and engineering best practices as the company scales. About Us We are a venture-backed aerospace startup focused on building advanced spacecraft systems that enable ambitious in-space missions. Our team combines deep technical experience with a startup mindset, emphasizing ownership, fast iteration, and first-principles engineering. Engineers here work across disciplines, move quickly from design to testing, and contribute directly to systems that are built to fly. Job Duties • Own development of avionics and electrical subsystems from early architecture through vehicle integration, • Design, prototype, and validate flight computers, electrical power systems, communications hardware, and core avionics electronics, • Perform system-level electrical trades, requirements capture, and interface definition across vehicle subsystems, • Develop avionics solutions supporting telemetry, communications, sensing, timing, navigation, and safety functions, • Design and bring up PCBs and supporting electronics hardware, • Build and execute ground testing and data acquisition systems to support rapid validation, • Develop and operate hardware-in-the-loop test environments to validate system behavior, • Perform hands-on troubleshooting and debugging at board, harness, and vehicle levels, • Lead root cause and corrective action investigations to improve reliability and performance, • Collaborate closely with software, propulsion, and systems engineers to ensure end-to-end integration, • Support harnessing design, mechanical packaging, and system integration efforts, • Execute rigorous technical reviews including design, test readiness, and flight readiness reviews, • Maintain clear engineering documentation supporting development and qualification efforts, • Ensure designs align with applicable safety and government compliance requirements Qualifications • Bachelor’s degree in Electrical Engineering, Aerospace Engineering, Computer Engineering, Physics, or a related technical discipline, • 2+ years of experience developing electrical or avionics systems for complex hardware platforms, • 1+ years designing electrical or control systems for spacecraft or similarly demanding environments, • Strong hands-on experience with circuit design, electronics prototyping, and lab test equipment, • Experience troubleshooting electronics at both board and system levels, • Experience designing hardware that operates in harsh or high-reliability environments, • Familiarity with PCB design tools such as Altium Designer or comparable platforms, • Strong engineering fundamentals and first-principles problem-solving approach, • Ability to work autonomously and execute quickly in a fast-paced environment, • Clear technical communication skills and strong ownership mindset, • U.S. Person status required due to export control regulations Preferred Experience • Experience delivering avionics or electrical systems that reached deployment or operational use, • Background in high-performance vehicles, aerospace hardware, defense systems, robotics, or autonomous platforms, • RF or communications systems experience, • Familiarity with electrical analysis and simulation tools such as LTSpice, ANSYS HFSS, or similar, • Experience with integration testing, environmental testing, or mission operations, • Knowledge of power electronics, batteries, sensors, or safety-critical hardware design, • Experience working under aggressive schedules with rapid design-build-test cycles Why Join Us • Opportunity for growth and increasing technical ownership, • High-impact role working on real flight hardware, • Fast-paced, execution-focused engineering environment, • High autonomy with minimal bureaucracy, • Close collaboration with experienced technical leadership, • Broad technical exposure across multiple spacecraft subsystems, • Strong PTO policy, • Medical, dental, and vision benefits, • 401(k) plan, • Equity options Compensation Details $140,000 - $220,000 #LI-AV

Job DescriptionSenior Electrical Engineer Location: Rancho Dominguez, CA (Onsite) Company: TRAK Machine Tools (Southwestern Industries) Salary Range: $125,000 – $150,000, depending on experience Experience Level: 7+ Years Website: About Us TRAK Machine Tools, a division of Southwestern Industries, is a leader in CNC machines and controls for the toolroom market. Founded in 1951, we design and manufacture advanced CNC controls and machine systems at our facilities in Rancho Dominguez, CA, and Henderson, NV. The Opportunity We are seeking a Senior Electrical Engineer to play a key role in the development of our next-generation CNC control system. This is a hands-on engineering position focused on electrical design, PCB development, machine integration, and advanced troubleshooting. Key Responsibilities • Design and develop electrical systems for CNC machine tool controls and Windows-based platforms, • Create circuit designs, schematics, and PCB layouts for production electronics, • Design electrical cabinets and schematics, • Select electrical and electronic components. Identify second sources, • Design cable and wire assemblies, • Integrate EtherCAT-based motion control systems for axis, spindle motors, and distributed I/O, • Troubleshoot complex machine/control issues across electrical, electronic, software, and mechanical domains., • Work with customer service to troubleshoot current and legacy machines and controls, • Design and build test equipment for validating production control hardware, • Use AI-assisted tools to improve engineering productivity and debugging efficiency, • Work with Electrical Inspectors for UL and NFPA conformityRequired Qualifications, • BS or MS in Electrical Engineering, Mechatronics, or related field, • 7+ years of professional experience in electrical engineering or industrial control systems, • Strong circuit design, PCB development, and hardware debugging skills, • Experience with Altium or Orcad PCB software, • Experience with oscilloscopes, logic analyzers, and electronic test toolsPreferred Qualifications, • Understanding of CNC motion control systems (motors, encoders, servo drives), • Experience with Solidworks or Autocad Electrical Software, • Experience with EtherCAT motion control networks, • Familiarity with spindle and axis drive integration and Delta and Yaskawa software, • Software development background (C/C++, embedded systems, PLCs), • Experience in robotics/automation systems

Job DescriptionCX2 is a next-generation defense technology company founded to deliver spectrum dominance for the United States and our allies. CX2’s AI-enabled hardware and software platforms detect, disrupt and defend the electromagnetic spectrum across land, air, sea and space domains. We are seeking a self starting and innovative Manufacturing Engineer who wants to drive manufacturing initiatives and improvements. You will touch the entire process from DFM and commissioning, through manufacturing ramp and to testing and validation. The ideal candidate combines a strong engineering foundation with hands-on experience in mechanical and electronic assembly production. Process Innovation- Conceptualize, develop, and implement processes and improvements to new and existing products.- Analyze production workflows and identify areas for improvement to reduce waste, cost, and downtime.- Develop and document process parameters, SOPs, and quality control standards. Drone Production Support- Work closely with engineering and production teams to resolve issues related to electromechanical assemblies and validation, such as PCB Assemblies, cable assembly, Antenna assembly and unit testing.- Facilitate day to day production support of drone production; mentor and guide technicians and engineers to best engineering practices to meet AS9100D ISO9001 defense manufacturing requirements.- Provide technical support during new product introduction (NPI) and engineering change implementations. Cross-functional Collaboration- Collaborate with R&D, Product Design, Quality Assurance, and Supply Chain teams to ensure manufacturability and scalability.- Participate in DFMA (Design for Manufacturing and Assembly) reviews during product development.- Coordinate with vendors and contract manufacturers to ensure consistent production quality. Quality and Testing- Define and create in-process validation and testing processes- Lead root cause analysis and corrective action plans for electrical assemblies and drone components- Ensure workplace safety and compliance with applicable standards and regulations (e.g., OSHA, ISO, RoHS).Required Qualifications • Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Electronics Engineering, Aerospace Engineering, or equivalent demonstrable experience, • A minimum of 5 years of experience within avionics, drone, or an electronics integration in aerospace or similar high-quality industries., • Familiarity with final assembly of PCBA and electro-mechanical assemblies such as motors, drone controllers or similar., • Experience providing technical support during new product introduction (NPI) and engineering change implementations., • Familiarity with lean manufacturing, Six Sigma, Kaizen, or other continuous improvement methodologies., • Proven analytical, troubleshooting, and project management skills., • Experienced presenter, demonstrating excellent communication and documentation abilities., • Ability to work extended hours/weekends for mission critical deadlines.ITAR Regulations, • To conform to U.S. Government technology export regulations, including the International Traffic in Arms Regulations (ITAR), applicant must be a US Citizen, Green Card holder, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Bonus Points, • Experience with drone/robotics manufacturing., • Proficiency with PCB layout tools like Altium., • Experience with aerospace production testing, validation and calibration calibration, thermal/vibration testing, or any other sort of validation/acceptance testing prior to shipping strongly preferred., • Experience commissioning new electronics assemblies through mid volume production., • Knowledge of manufacturing processes such as injection molding, carbon fibre layup, SMT, PCB assemblies or CNC machining preferred., • Green Belt or Black Belt certification is a plus., • Working knowledge of AS9100D, NADCAP and ISO9001 requirements in defense manufacturing.What We Offer, • Competitive salary, stock options and benefits, including health, vision and dental., • 401K enrollment at 90 days., • Generous PTO + most Federal Holidays observed., • Collaborative and inclusive work environment., • Access to the latest tools and technologies., • High levels of responsibility and autonomy., • Professional growth and development opportunities.

Job Description Manufacturing Engineer - Build and Scale Advanced Optical Hardware Production! Gardena, CA | On-site Opportunity Summary A fast-growing deep-tech startup in Southern California is hiring a Manufacturing Engineer to help build and scale the production systems behind next generation optical hardware. The company is developing advanced technology that relies on precision electro-mechanical assemblies, automated production equipment, and high-quality manufacturing processes to support future high-volume deployment. This role is designed for an early-career engineer who enjoys working with real hardware systems. You will collaborate closely with experienced engineers to design production tooling, build automated assembly cells, and help transition new products from development into scalable manufacturing. The position offers the opportunity to gain hands-on experience building physical systems while contributing to the foundation of a rapidly expanding manufacturing operation. About Us We are a venture-backed technology company focused on advancing hardware systems that rely on precision optical components and complex electro-mechanical assemblies. Our team is working to bring cutting-edge technologies into scalable manufacturing environments that can support real-world deployment across multiple industries. By combining automation, advanced engineering, and modern factory infrastructure, we are building the foundation required to manufacture complex hardware at scale. Job Duties • Assist with the design and development of automated production cells, including fixtures, tooling, and assembly systems for precision electro-mechanical and optical components, • Create and modify 3D CAD models used for tooling, fixtures, mechanical interfaces, and production equipment, • Support new product introduction activities including process development, build planning, and early production builds, • Develop and maintain manufacturing documentation such as work instructions, assembly procedures, and validation protocols to support repeatable production, • Assemble, test, and troubleshoot prototype equipment and production hardware directly on the factory floor, • Evaluate production data, yield metrics, and metrology results to assist with root cause analysis and process improvement initiatives, • Work with cross-functional engineering teams to identify manufacturability improvements and feed design insights back into product development, • Assist with the development of inspection methods and production testing strategies including in-line metrology and final product validation Qualifications • Bachelor's or Master's degree in Mechanical Engineering, Manufacturing Engineering, Electrical Engineering, or a closely related field, • Strong engineering fundamentals such as mechanics of materials, controls, or heat transfer, • Proficiency using modern 3D CAD software such as NX, SolidWorks, Creo, or similar platforms, • Hands-on experience building, testing, or debugging mechanical or electro-mechanical systems through academic projects, internships, research labs, or co-op programs, • Strong analytical thinking and structured problem solving skills, • Comfortable working directly with tools, lab equipment, and physical hardware in a lab or manufacturing environment, • Willingness to support production schedules including extended hours or weekend work when required Preferred Experience • Internship, co-op, or early professional experience in robotics, automation, hardware development, or manufacturing environments, • Experience designing tooling, fixtures, or assembly aids for production or test environments, • Exposure to data analysis or scripting tools such as Python, MATLAB, or similar platforms for evaluating process performance, • Experience working with automated equipment, robotic systems, or precision assembly tools, • Familiarity with manufacturing process development tools such as PFMEA, statistical process control, or capability analysis, • Understanding of GD&T principles and tolerance analysis related to tooling and fixture design, • Exposure to production data systems, MES platforms, or traceability infrastructure used in manufacturing environments, • Familiarity with cleanroom or controlled manufacturing environments Why Join Us • Opportunity for growth in a rapidly expanding deep-tech manufacturing environment, • Ability to work directly with experienced engineers on complex hardware systems, • Hands-on exposure to advanced automation and precision manufacturing processes, • Collaborative startup environment where engineers can contribute across disciplines, • Flexible work environment, • Strong PTO policy, • Medical, dental, and vision benefits, • 401k retirement plan, • Equity participation opportunities Compensation Details Salary range: $100,000 - $160,000 #LI-AV

Job DescriptionAbout DexterityAt Dexterity, we believe robots can positively transform the world. Our breakthrough technology frees people to do the creative, inspiring, problem-solving jobs that humans do best by enabling robots to handle repetitive and physically difficult work. We’re starting with warehouse automation, where the need for smarter, more resilient supply chains impacts millions of lives and businesses around the world. Dexterity's full-stack robotics systems pick, move, pack, and collaborate with human-like skill, awareness, and learning capabilities. Our systems are software-driven, hardware-agnostic, and have already picked over 15 million goods in production. And did we mention we’re customer-obsessed? Every decision, large and small, is driven by one question – how can we empower our customers with robots to do more than they thought was possible? Dexterity is one of the fastest growing companies in robotics, backed by world-class investors such as Kleiner Perkins, Lightspeed Venture Partners, and Obvious Ventures. We’re a diverse and multidisciplinary team with a culture built on passion, trust, and dedication. Come join Dexterity and help make intelligent robots a reality! About the RoleAs a Mech Specialist, you will be the primary engineer to operate our product at the customer site, and be the first point of contact for troubleshooting issues, and providing communication to our development team. This role bridges hardware, systems integration, and field operations with ownership of diagnostics, repairs, retrofits, and lifecycle service actions. You’ll lead on-site investigations, coordinate fixes, and interface tightly with our Development team. Success in this role means hands-on operational excellence, a deep understanding of Physical AI systems, and the ability to communicate clearly with both technical teams and operations leaders. Physical & Work Environment • Location: Customer Facility in Gardena, CA., • This position requires extended deployment to customer locations, with up to 80% of time spent stationed on-site., • On-site assignments will involve warehouse conditions (temperature variations, industrial noise) and prolonged standing or walks., • Assignments may span several weeks or months and are intended to establishing a consistent presence at the customer site.Core Outcomes, • New Product Introduction: Ensure successful field deployment of new products by driving pilot execution, resolving early issues, and meeting customer KPIs., • Reliable Operations: Maintain high Mech system uptime by diagnosing root causes and executing rapid, durable fixes in the field., • Lifecycle Stewardship: Own warranty actions, spare part tracking, retrofit execution, and RMA processing for your assigned sites., • Customer Confidence: Act as the face of Dexterity Engineering in the field—resolving chronic issues and maintaining long-term system health., • Operational Excellence: Reduce repeat incidents by authoring runbooks, knowledge base articles, and automated diagnostics.Key Responsibilities, • Run day-to-day operations of the Mech system at customer sites during pilots., • Act as super-user, first line of support, and liaison between DGS and Dexterity., • System Operation: Safely operate Mech and materials handling systems. Manage daily workflow, including package exception handling., • Issue Management: Identify and report issues; perform initial T0 troubleshooting. Validate fixes in the field and close out issues with Echo/Delta teams. Track issue lifecycle on site until closure., • Reporting: Provide daily internal updates and KPI reports. Deliver daily customer-facing reports on operations status., • Customer Interface: Align pilot schedules with local operations team. Support customer training sessions and act as a trainer for new users., • Feature Deployment: Execute SW upgrades/downgrades and RFT (Request for Test) activities for software and hardware. Manage test packages and coordinate new feature validation., • Maintenance & Logistics: Manage spares, tools, and maintenance cage. Support preventive maintenance activities as directed by Echo/Delta., • Continuous Learning: Build knowledge base of operations, troubleshooting, and reporting.Core Skills & Experience, • Strong troubleshooting skills across electromechanical systems, pneumatics, drives, sensors, and industrial robotics, • Comfort with Linux command line, log analysis, and basic application debugging (Python/SQL), • Familiarity with tools like Jira, Zendesk, and knowledge base platforms, • Experience managing spares, executing RMAs, and coordinating with supply chain or service teams, • Ability to read schematics, wiring diagrams, and mechanical drawings, • Self-starter mindset, with ability to lead service actions under ambiguous field conditions, • Strong communication skills to clearly explain findings and collaborate across functions, • Familiarity with support tools and observability platforms (e.g., Grafana, Kibana, Foxglove, ArgoCD)., • Self-starter mindset with a willingness to take ownership in ambiguous environmentsBias for Action — sense of urgency in production environments; willingness to “own the ticket” until closureNice-to-Have, Role-Specific Strengths, • Experience supporting warehouse robotics or industrial automation systems, • Familiarity with EtherCAT, Beckhoff, or Elmo servo drive systems, • Prior field service engineering or hardware NPI commissioning experience, • Experience developing or maintaining diagnostic tooling, • Knowledge of application-layer debugging, especially for real-time systems, • Understanding of reliability modeling, FMEA, or service metrics (e.g., MTTR, MTBF)Qualifications, • Bachelor’s degree in Mechanical, Electrical, Mechatronics, or Industrial Engineering or related field, • 3+ years in field service, product support, or hardware debugging roles in robotics, automation, or complex electromechanical systems, • Physical ability to perform service tasks in warehouse environments, including equipment access, lifting, and calibration, • Comfortable working extended hours or on-call rotations for high-severity incidents, • Must be able to travel up to 25%

Job DescriptionHadrian – Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We recently raised $260 million dollar Series C to accelerate this mission. We are excited to be launching a new Factory in Mesa, Arizona, a 270,000 square foot facility that will create 350 new jobs immediately. We are opening a new headquarters to support thousands of future hires, launching Hadrian Maritime to serve naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian works with startups, Tier 1 and Tier 2 suppliers, and major defense contractors across space, shipbuilding, and aviation to scale production, reduce costs, and accelerate delivery on mission-critical programs. We are backed by leading investors including Lux Capital, Founders Fund, and Andreessen Horowitz. Our fast-growing team is united by a shared mission to reindustrialize American manufacturing for the 21st century and beyond! The Role The CMM Programmer (PC-DMIS) will play a critical role in advancing Hadrian’s automated inspection capabilities. You will program and optimize PC-DMIS routines for highly complex prismatic parts for the aerospace and defense industries, ensuring precision and reliability in our New Product Integration (NPI) and production workflows. Unlike traditional shops, the programs you create will run on fully automated CMM cells designed to operate lights-out. This means your work must incorporate robust programming practices and controls to ensure reliability. You’ll also collaborate with our software automation teams, who have engineer layered controls to safeguard and standardize the programming approach. This is a unique opportunity to work at the frontier of CMM automation and help shape the future of metrology in aerospace manufacturing What You'll Do * Create and optimize PC-DMIS programs for New Product Integration (NPI) work orders * Interpret and apply GD&T requirements from engineering drawings; identify and resolve discrepancies * Collaborate with cross-functional teams (CMM technicians, Quality, Manufacturing Engineering, CAM programmers) to drive inspection excellence * Design fixtures to support automated inspection * Troubleshoot PC-DMIS programs and improve Hadrian’s internal specifications * Support prove-outs of highly complex geometries with custom probes and setups * Partner with software teams to identify and implement process improvements What We’re Looking For * High school diploma or equivalent * 2+ years of experience as a PC-DMIS programmer * 2+ years of experience interpreting engineering drawings * Experience working in a machine shop with knowledge of metrology for subtractive manufacturing processes What Will Set You Apart * PC-DMIS training (101, 201, or beyond) * Strong understanding of GD&T, datum structures, and tolerances (form, orientation, location, profile, runout) * CAD software experience (NX preferred) * Background as a machinist or exposure to 5-axis machining environments * PC-DMIS API / VB scripting expertise * Familiarity with automated inspection processes and integration of customer specifications Compensation For this role, the target salary range is $83,000- $189,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation stipend if you’re moving from outside of LA * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR [here ](). Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job DescriptionSpacecraft Flight Computing EngineerThe Opportunity We are supporting a well-funded space company developing a human-rated spacecraft with real flight hardware, real missions, and real technical ownership. This role sits on a small, elite Flight Computing team responsible for the design and implementation of the spacecraft’s computing architecture — from custom flight computers through operating systems, low-level software, and fault-tolerant behavior. This is not a traditional flight software role layered on top of vendor avionics. The team designs the computers, defines the operating environment, and owns how the system behaves under real-world faults. You would work directly with the engineer who architected the fault-tolerant computing and networking systems for Falcon 9 and Dragon, including the hardware that interfaces with the International Space Station. What You’ll Work On * Designing and implementing spacecraft flight computing systems with full hardware/software ownership * Developing and tuning low-level software across bootloaders, operating systems, and device drivers * Building fault-tolerant behavior that allows systems to continue operating through anomalies * Working closely with custom flight computer hardware designed in-house * Defining how compute, timing, and networking behave across spacecraft subsystems * Participating in system bring-up, integration, debugging, and mission support * Collaborating with a small group of highly capable engineers who value first-principles design What We’re Looking For We are open to exceptional engineers at multiple experience levels, provided they have strong fundamentals and real technical depth. Strong indicators include: * Deep experience with C/C++ in low-level or systems contexts * Background in embedded systems, firmware, kernel-level Linux, or RTOS-based development * Comfort working close to hardware (bring-up, debugging, timing, fault analysis) * Experience designing or supporting real-time or safety-critical systems * Engineers who build things because they’re curious — not just because it’s assigned Prior spacecraft experience is not required. Engineers from adjacent domains (embedded systems, automotive safety, robotics, compute infrastructure, etc.) are welcome if they bring the right depth and mindset. What Makes This Different * Small, senior technical team — no large hierarchies, no busywork * Minimal legacy code — engineers are empowered to fix or redesign what doesn’t make sense * Modern, high-performance compute platforms, not legacy aerospace hardware * Real authority over architecture and implementation decisions * Direct mentorship and collaboration with one of the most experienced flight computing architects in the industry * A rare blend of startup-level autonomy with the resources of a major space program Location & Eligibility * Based in the South Bay / Greater Los Angeles area * Candidates must be U.S. persons due to regulatory requirements * Relocation support may be available Interested? If you’re excited by the idea of building spacecraft computers the right way — with real ownership, real impact, and real technical peers — we’d welcome a conversation.

Job Description A New Paradigm For Space Operations. Who We Are:Space Kinetic is a cleared, venture-backed startup focused on addressing urgent national security priorities. Our goal is to deliver a suite of asymmetric capabilities for space superiority and missile defense leveraging our proprietary electromechanical deployment system, which enables the rapid deployment of low-cost payloads through space without firing a thruster. Space Kinetic is currently assembling its TRL-5 prototype. Our goal is to leverage this platform to provide the United States with a new tool for securing the space domain & catalyzing the emerging space economy. What You'll Do: The Principal Flight Software Engineer will be required to work in a fast-paced prototyping environment with an aggressive schedule toward flight and should have experience and a general understanding of spaceflight payloads. In this position, you will be responsible for low-level and high-level software in Space Kinetic's products through all phases of the development process. As a Principal, you will be responsible for software designs from concept through production, including product roadmaps, block diagrams, detailed design and coding, analysis, test and qualification. The Principal Software Engineer will serve as the technical leader for the development, integration, and validation of Space Kinetic's electromechanical system. This role is responsible for the architecture, design, and implementation of mission-critical software that enables spacecraft control, autonomy, communication, and safety. The ideal candidate possesses deep experience in embedded real-time systems, software reliability, and spacecraft operations. • Lead the design and development of space Kinetic flight software architecture, including guidance, navigation, control (GNC), telemetry, command, and fault management systems., • Define software requirements, interfaces, and verification strategies in coordination with systems, electrical, and mission engineering teams., • Develop robust, real-time, and fault-tolerant software using C/C++ and/or Rust in embedded or RTOS environments., • Perform software design reviews, code reviews, and verification activities to ensure safety, reliability, and performance compliance with space flight standards (e.g., NASA NPR, ECSS, DO-178C)., • Mentor and guide software engineers through technical leadership, code quality enforcement, and system-level integration., • Support spacecraft-in-the-loop, hardware-in-the-loop (HIL), and flight simulation testing environments., • Contribute to continuous improvement of software development processes, tools, and best practices across the engineering organization., • Participate in mission readiness reviews, anomaly resolution, and on-orbit software updates and maintenance., • Experience with simulation environments and ground software integration., • Excellent leadership, collaboration, and communication skills across multidisciplinary teams., • Strong problem-solving ability and technical judgment under mission-critical constraints., • Bachelor of Science (BS) or Master of Science (MS) degree in Computer Science, Electrical Engineering, or Computer Engineering., • 10+ years of experience developing embedded or real-time software for space, aerospace, robotics, or mission-critical systems., • Proven experience leading software development through all phases of the system lifecycle—from requirements through flight operations., • Strong proficiency in C/C++, with working knowledge of Python or scripting languages for automation and testing., • Familiarity with RTOS, bare-metal programming, or Linux-based embedded systems., • Deep understanding of software reliability, deterministic timing, concurrency, and resource management in constrained environments., • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder)., • Experience with flight software frameworks (e.g., NASA cFS, F' FPrime, or custom architectures)., • Familiarity with model-based systems engineering (MBSE) and interface control documentation., • Knowledge of space communication protocols (CCSDS, SpaceWire, MIL-STD-1553, etc.). *Our vision is unique, and so is the team we're building. If you're driven to succeed in this role, even if your background doesn't fully align with every qualification, we want your application.Where You'll Be: * The position is onsite at our headquarters in El Segundo, CA. Domestic travel may be required (up to ~20% of the year). What We Offer: • Equity-Based Compensation, • Highly Competitive PTO and Holiday Calendar, • Comprehensive Medical, Dental, and Vision Coverage, • Unique Performance-Based Bonus Structure, • Health and Wellness Stipend Equal Employment Opportunity: Space Kinetic provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, gender identity, sexual orientation, national origin, veteran status, disability or any other legally protected status. The annual base salary for this role is below. Pay Grades are determined by role, level, location, and alignment with market data. Individual pay will be determined on a case-by-case basis and may vary based on the following considerations: interviews and an assessment of several factors that are unique to each candidate, job-related skills, relevant education/experience, certifications, abilities of the candidate and internal equity. Pay Range$150,000—$190,000 USD

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. About the Role We are seeking a Staff Software Engineer, Combinatorial Optimization with a strong background and hands-on experience using the latest technologies in task planning, scheduling, and simulation. You will be working on designing, developing, and deploying software leveraging state‑of‑the‑art decision‑making technologies (SAT/SMT solvers, constraint programming, and more). You will be participating in an end-to-end solution that includes system and infrastructure design, algorithm development, and production deployment. This role will be key to building optimization-powered applications for robotics and manufacturing that improve process efficiency and product quality at Divergent. Key Responsibilities • Design, develop, and deploy innovative planning algorithms using the latest task planning, scheduling, and simulation techniques., • Determine the system design and deployment architecture for the software pipeline., • Collaborate with cross-functional teams to integrate and optimize planning solutions into products and processes., • Document your work, including code, algorithms, user manuals, and procedures, to support knowledge sharing and future development efforts., • Develop and maintain software development best practices to ensure high-quality code, efficient testing, and timely releases., • Stay updated on advancements in planning algorithms and technologies, and contribute fresh ideas and insights to the team.Basic Qualifications, • Ability to lawfully access information and technology that is subject to US export controls, • Bachelor's or Master's in Computer Science (or related) + 5 years of professional software‑engineering experience., • Advanced proficiency in Python and C++ (multithreading, memory management)., • Proven experience with SAT/SMT solving, combinatorial optimization, and constraint programming., • Strong background in task planning and scheduling (PDDL, heuristic/temporal planners, resource‑constrained project scheduling)., • Hands‑on with open‑source planning/scheduling libraries or equivalent., • CI/CD pipeline design, Docker & Kubernetes deployment, automated unit‑testing, debugging, and performance profiling., • Excellent analytical, problem‑solving, written/oral communication, and collaboration skills., • Solid understanding of system design, scalability, and cloud‑native architecture.Preferred Qualifications, • Ph.D. (or equivalent research experience) with a strong publication record in task planning, scheduling, or related optimization venues., • Active open‑source contributions to solver/planner projects., • Familiarity with C# and TypeScript., • Domain expertise in robotics or manufacturing workflows., • Experience leading medium‑sized technical initiatives from definition through delivery., • Strong stakeholder communication and conflict‑resolution abilities., • Experience integrating ML/DL models with planning pipelines for hybrid approaches. Pay Range$155,550—$213,840 USD What We Offer: • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description Senior Motion Control Software Engineer Location: Rancho Dominguez, CA (Onsite)** Salary: $150,000 – $175,000 Company: TRAK Machine Tools (Southwestern Industries) About TRAK Machine Tools TRAK Machine Tools, a division of Southwestern Industries, designs and manufactures CNC controls and machine tools for the toolroom market. For over 50 years, we have built PC-based CNC control systems known for reliability, innovation, and ease of use. Learn more at The Role We are seeking a hands-on Senior Real-Time Motion Control Software Engineer to take ownership of our motion control and real-time slave system. This is a deeply technical roll ideal for an engineer who enjoys solving real-world control problems at both the software and machine level. Role focus: ~60% real-time motion/slave system ~40% Windows-side C/C++ and Win32 integration and PLC logic You will work directly at CNC machines to diagnose, tune, and validate motion performance. Key Responsibilities Real-Time Motion Control • Own and maintain real-time motion control software written in C, • Support and ultimately own the RTX64 real-time implementation, • Manage deterministic scheduling, thread priorities, and core affinity, • Diagnose and resolve latency-sensitive and race-condition issues, • Tune PID loops and feed-forward control, • Analyze step response and diagnose servo instability on physical machines, • Validate motion behavior hands-on at CNC machines PLC & Machine Logic • Maintain and extend our proprietary PLC system (written in C/C++), • Develop new PLC logic to support expanded I/O and new machine features, • Debug field I/O and machine sequencing issues Platform Modernization • Support migration from Windows CE to Windows 11 IoT + RTX64, • Refactor and improve motion-related code where appropriate, • Ensure long-term stability and maintainability of the motion platform Required Qualifications • BS or MS in Electrical Engineering, Computer Science, Mechanical Engineering, or related field, • 10+ years of professional software development experience, • Strong C programming experience in real-time systems, • Strong C++ experience in Windows/native environments, • Experience working in deterministic or near real-time systems, • Solid understanding of:, • Thread prioritization and concurrency, • Core affinity and real-time scheduling, • Interrupt-level timing constraints, • Strong control theory background, including:, • PID control, • Closed-loop feedback systems, • Step response analysis, • Feed-forward techniques, • Ability to diagnose servo instability on real hardware, • Comfortable working hands-on with CNC machines Preferred Experience • Experience with RTX64, IntervalZero, or similar RTOS platforms, • Background in CNC, robotics, aerospace, disk drives, semiconductor equipment, or industrial automation, • Familiarity with EtherCAT/TCP/UDP networking and/or industrial communications systems, • Experience migrating legacy real-time platforms, • Comfortable working with Visual Studio Why Join Us? At TRAK Machine Tools, you’ll work on cutting-edge CNC control systems that directly impact modern manufacturing. We offer competitive compensation, health and disability insurance, paid vacation, and a 401(k) retirement plan.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose This role serves as the technical bridge between design/manufacturing engineers and the production team, with a core focus on developing scalable, high-reliability automated, machining, & inspection processes. This person is responsible for driving process improvements, solving complex production challenges, and helping to eliminate part flow blockers. Rather than simply supporting products, this engineer leads process innovation enabling rapid iteration, increasing production efficiency, and helping scale Divergent's capabilities to meet program demands. The Role As the Senior Advance Manufacturing engineer, you will lead the development, execution, and continuous improvement of day-to-day operations for machining, automated assembly, automated anodize, inspection, & cleaning work centers. You'll be one of the primary technical resources supporting these areas with troubleshooting production issues, refining the processes, and enabling scalability through smart programming, tooling/fixturing, documentation, and workflow improvements. This role is hands-on, fast-paced, and essential to delivering high-precision, high-reliability hardware across automotive, aerospace, and defense programs. The ideal candidate is well versed in aerospace production environment and has direct experience with supporting the production floor, DFM, machining, assembly, coating, metrology, & thrives on solving complex shop floor problems, and brings a strong process mindset to drive quality, speed, and consistency. Key Responsibilities Operations Support • Own daily production execution, working directly with production floor to resolve issues, and ensure steady throughput., • Develop and implement best practices, processes, strategies, and calibration procedures to improve operational capacity., • Act as the technical bridge between design/manufacturing engineering and production teams., • Lead development, execution, and continuous improvement of machining, automated assembly, automated anodize, inspection, and cleaning work centers., • Collaborate on programming for 3-axis, 3+2, and 5-axis CNC mills using Siemens NX CAM software., • Provide feedback using advanced understanding of GD&T, tooling, feeds/speeds, and fixturing., • Introduce standardized strategies, programming conventions, and setup documentation to improve consistency and reduce cycle time., • Help lead efforts to integrate new machines, equipment, tools, and fixturing into production; support commissioning., • Co-Drive design-for-manufacturing (DFM) conversations with Manufacturing engineering to improve part manufacturability and reduce complexity at the machine., • Develop and implement innovative fixturing strategies tailored for complex additive manufactured geometries., • Analyze data to identify trends, inefficiencies, and root causes of scrap or delays; implement corrective actions and process improvements., • Create and maintain detailed documentation to ensure consistency and repeatability across shifts and teams., • Collaborate with software and data teams to integrate production metrics and feedback loops into real-time dashboards and planning systems. Basic Qualifications • Ability to lawfully access information and technology that is subject to US export controls, • Bachelor's degree in Mechanical, Manufacturing, or Industrial Engineering, or equivalent hands-on experience, • 8+ years of experience in aerospace or defense industries., • Hands-on experience with advanced manufacturing techniques, including additive manufacturing, robotics, coatings, & inspection/quality, • Direct experience with machining, additive manufacturing, coatings, & inspection/quality., • Proficiency in CAD/CAM software (e.g., Siemens NX, AutoCAD,), • Advanced knowledge of CNC machining, structure assembly, GD&T, tooling, & metrology., • Experience evaluating, selecting and commissioning of machines to meet manufacturing capabilities., • Excellent problem-solving skills and ability to innovate in a fast-paced environment., • Strong communication and collaboration skills, with the ability to work effectively in cross-functional teams., • Ability to work on multiple projects and initiatives in parallel Preferred Qualifications, • Master's degree in mechanical, manufacturing, or aerospace engineering., • Experience with robotic machining systems and calibration methodologies, • Experience with manufacturing automation in automotive or aerospace environments Work Environment, • This is a hands-on position that will require standing for long durations of your day and working directly with hardware on the floor., • Must be comfortable stooping, bending, and standing., • Position may require occasional travel, long hours or weekend work. Compensation, • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description Flight Software Engineer Location: Hawthorne, CA (near LAX) Relocation: Available Team Size: ~20 engineers Compensation: $90,000–$205,000 + equity (based on performance, level, and location) About the Mission Imagine a world where solar power doesn’t shut off at sunset. We are building a constellation of autonomous spacecraft designed to reflect sunlight back to Earth after dark—unlocking nighttime solar energy for the first time in history. This is not theoretical. We are launching our first spacecraft in 2026, backed by top‑tier investors and led by engineers who have built and flown real hardware in orbit. If you want to write software that will operate a fleet of autonomous spacecraft in low‑Earth orbit, this is that opportunity. What You’ll Build As a Flight Software Engineer, you will design and deploy the software that powers every spacecraft in our constellation. Your work will span: • Autonomous decision‑making and onboard control, • Real‑time embedded C/C++ on ARM microcontrollers, • Embedded Linux systems for mission‑critical operations, • Guidance, navigation, and control (GNC), • Command and data handling, • Fault detection, isolation, and recovery, • Over‑the‑air updates to on‑orbit vehicles, • Hardware‑in‑the‑loop testing and day‑in‑the‑life simulations You will own your systems end‑to‑end—from concept and architecture to implementation, testing, and on‑orbit performance. This is a role for engineers who want to see their code fly. What You’ll Do • Develop autonomous flight software for a new class of spacecraft, • Build the infrastructure for rigorous testing and large‑scale deployment, • Implement real‑time control loops, state estimation, and system health monitoring, • Design fault‑tolerant software using watchdogs, voting logic, ECC, and FDIR, • Work directly with electrical, mechanical, and mission operations engineers, • Support on‑orbit operations and deliver OTA updates to live spacecraft, • Contribute to architecture decisions that shape the entire constellation Minimum Requirements • Demonstrated excellence on a comparable software project (autonomy, robotics, flight software, or high‑reliability embedded systems), • 3+ years of professional C/C++ experience Ideal Experience You don’t need all of these, but the strongest candidates will have several: • BS in CS, EE, ME, or Aerospace Engineering, • Flight software experience for spacecraft or similar high‑reliability systems, • ARM microcontroller development, • Embedded Linux (Yocto, Buildroot, custom kernels), • Strong debugging, unit testing, and integration testing skills, • Networking fundamentals (TCP/IP, CAN, UART, SPI, I2C), • Fault‑tolerant software design (watchdogs, voting logic, ECC, FDIR), • Exposure to MISRA‑C, JSF, DO‑178C, or similar standards, • Experience in fast‑paced, high‑ownership engineering environments Who Thrives Here We hire outliers—people who have done something exceptional, unusual, or bold. Not just “good engineers,” but people who have demonstrated intensity, creativity, and a track record of doing hard things. Examples of backgrounds that stand out: • Built a complex robotics or embedded system solo, • Led major engineering projects early in your career, • Designed custom hardware or flight computers, • Worked on spacecraft, rockets, drones, or autonomous vehicles, • Promoted rapidly due to exceptional performance, • Achieved something rare in any domain—technical or otherwise If you’ve done something that made people say, “I can’t believe you pulled that off,” we want to talk to you. Why This Role Is Different • Your code will fly on every spacecraft we launch, • You will work directly with founders and senior engineers, • You will have ownership over major subsystems, • You will see your work go from idea → hardware → orbit quickly, • You will help define a new category of space technology This is a chance to build something the world has never seen before.

Job Description Flight Software Engineer – Build Next-Generation Spacecraft Systems for High-Energy Missions! El Segundo, CA | On-site Opportunity Summary Join a venture-backed aerospace startup developing advanced spacecraft designed to operate in demanding orbital environments. This role sits at the heart of vehicle development, where software enables guidance, autonomy, communication, and overall mission execution. You will work closely with founders and a highly technical team to architect and deploy flight software that supports real-time, safety-critical spacecraft operations. This is a high-ownership opportunity for an engineer who thrives in fast-moving environments and wants to see their work move quickly from development to flight. You will contribute across the full lifecycle of vehicle software, from architecture and implementation through integration, testing, and mission support, helping shape both the product and the engineering culture as the company scales. About Us We are an early-stage space technology company building advanced in-space transportation and spacecraft systems aimed at expanding access to complex orbital missions. Founded by engineers with deep experience delivering flight-proven systems, the team combines startup speed with disciplined engineering practices to bring high-performance hardware and software together. Our environment emphasizes first-principles thinking, technical ownership, and rapid iteration toward real mission outcomes. Job Duties • Architect, develop, and deliver core flight software to meet system performance and reliability requirements, • Design, implement, integrate, and verify software supporting Guidance, Navigation, and Control (GNC) functions, • Develop real-time systems for command and telemetry handling, mission sequencing, autonomy, and fault management, • Implement deterministic software features within a real-time flight framework for spacecraft operations, • Develop closed-loop control software supporting propulsion, attitude control, and other time-critical vehicle functions, • Write clean, efficient, and testable code for embedded and safety-critical applications, • Build communication interfaces and networking protocols including Ethernet, UDP, multicast, and similar technologies, • Collaborate closely with avionics, propulsion, GNC, and hardware teams across the full development lifecycle, • Design and maintain embedded software targeting microcontrollers and vehicle compute systems, • Develop detection and mitigation algorithms for anomalies such as sensor failures, actuator issues, or radiation-induced faults, • Participate in design reviews and code reviews, ensuring strong safety, reliability, and maintainability practices, • Support hardware-in-the-loop testing, system integration, environmental testing, and mission readiness activities, • Troubleshoot and resolve real-time issues during testing and operational phases, • Maintain clear documentation including architecture, ConOps, and software interface definitions Qualifications • Bachelor’s degree in Computer Science, Computer Engineering, Aerospace Engineering, Electrical Engineering, or similar technical discipline, • 2+ years of software development experience, preferably involving embedded systems or complex vehicles, • Strong experience writing C/C++ for embedded or real-time applications, • Solid understanding of operating systems, computer architecture, data structures, and networking fundamentals, • Experience with version control systems and modern software development practices, • Familiarity with Real-Time Operating Systems (RTOS) or Embedded Linux environments, • Understanding of microcontroller architectures and hardware interfaces, • Strong debugging, performance optimization, and root-cause analysis skills, • Ability to move quickly and contribute across multiple engineering disciplines in a startup setting, • U.S. Person status or eligibility to obtain required export licensing Preferred Experience • Hands-on experience delivering flight or vehicle software for spacecraft, launch vehicles, drones, robotics, or autonomous systems, • Background in mission operations, on-orbit support, or integrated system testing, • Familiarity with NASA cFS, ROS2, or similar aerospace middleware frameworks, • Experience designing deterministic systems for hard real-time constraints, • Exposure to safety-critical software development processes or formal certification environments, • Experience with additional tools or languages such as Python, Rust, Git-based workflows, Grafana, or comparable platforms, • Participation in integration, testing, launch, or operational phases of a space vehicle program Why Join Us • Opportunity to build flight-critical systems with real mission impact, • High level of technical ownership and influence, • Fast-paced startup environment with strong engineering autonomy, • Direct collaboration with experienced aerospace founders and technical leaders, • Opportunity for long-term growth as the company scales, • Work on cutting-edge space technology pushing the boundaries of orbital operations, • Equity participation and the ability to help shape a growing team Compensation Details $135,000 - $225,000 #LI-AV

We’re looking for enthusiastic, self-driven, individuals to assist existing and prospective clients within our organization.This position will work with multiple clients throughout the day providing outstanding service and product knowledge.Distributes all benefit enrollment materials and

Call Center / Remote] - Anywhere in U.Competitive pay / Medical, dental & vision / 401k / PTO - As a Customer Service Rep at Planet Home Lending, you will: Respond to borrower inbound calls concerning their account, ensuring high quality service and adhering to productivity and regulatory requiremen

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

Customer Support / Remote] - Anywhere in U.Medical, dental & vision / PTO / Paid training - As a Customer Service Rep at Assurant, you will: Handle inbound customer calls and/or e-mails with empathy and professionalism; Resolve issues, answer questions, and provide proactive solutions; Document inte

Customer Support / Remote] - Anywhere in U.Medical, dental & vision / 401k - As a Customer Service Rep at DGI Supply, you will: Handle customer and sales interactions via phone, email and tickets within the Customer Care Box; Process requests for quotations, order entry and product questions from cu

Confidential – Wellness & Nutrition Brand.Marina Del Rey, CA (Onsite, 5 days/week).Monday–Friday, 9:00 AM – 5:00 PM PT.Temporary, starting ASAP (April 6 post-interviews), approximately 3 months.A fast-growing beverage and lifestyle brand is seeking a Customer Service Associate to support a

Bachelor's degree in mechanical engineering, electrical engineering, aerospace engineering or industrial engineering. Master's degree in mechanical engineering, electrical engineering, aerospace engineering or industrial engineering. Success requires a practical application of engineering principles

Bachelor's degree in quality engineering or other related Engineering discipline,. Create or update Software Quality Assurance Plans (SQAPs) or Hardware Quality Assurance Plans (HQAPs) – for customer submission and approval. Support Engineering Test Procedure (ETP)/System Test monitoring, Test Set

Strong computer literacy and ability to quickly learn new software programs.