Saws jobs in Camden, New JerseyCreate job alerts

Job Description At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal Manufacturing is seeking talented Maintenance Technicians to join our fast-paced, dedicated, and extremely talented team. Candidates should be able to work independently, have a strong working knowledge of general construction trades (carpentry, electrical, plumbing) and experience maintaining and repairing industrial equipment. They will be responsible for performing preventive maintenance and repairs across a wide variety of wood shop and metal shop equipment as well as general facilities work throughout all four of our Philadelphia facilities. This role will operate on a 5 day, 8 hour schedule with working hours from 6:30AM-3:00PM Monday-Friday. Responsibilities: • Work safely and independently in an organized manner to troubleshoot and resolve issues with high quality and lasting solutions., • Perform preventive maintenance and repairs on common wood working and metal working equipment (i.e. table saws, edge banders, edge and drum sanders, shapers, joiners, band saws, rollers, etc)., • Perform general building repair and maintenance tasks including carpentry, plumbing, electrical and general facilities work., • 5+ years' experience in a maintenance role in an industrial manufacturing environment., • Proven track record using a variety of tools and trades to troubleshoot and resolve issues in a high quality manner., • Consistent attention to detail and a strong desire to understand and properly address the root causes of issues., • Ability to understand and follow written instructions. This role offers a competitive salary in addition to inclusion in the company's profit sharing and the following benefits Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Flexible schedule, • Health insurance, • Life insurance, • Paid time off, • Referral program, • 5 Day Work Week (6:30AM-3:00PM M-Fr), • Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required), • Personal vehicle required for transportation between our facilities. Mileage will be reimbursed and standard rates.

Job Description Hiring Extrusion Machine Operators in Pennsauken, NJ! Join our dynamic team as an Extrusion or Saw Machine Operator, where you will be responsible for setting up, operating, and monitoring various production machinery and equipment. This role offers an exciting opportunity for individuals who are reliable, hardworking, and dedicated to continuous improvement. What We Offer: • Direct Placement - Permanent from Day 1!, • Overtime available, • Medical, dental, vision insurance, • 401k Plan, • 6:30am-3pm, Monday to Friday, • Set up, operate, and monitor metalworking machines such as saws and other tools to shape and form metal stock into parts or products., • Read specifications and notes outlined in work orders and the EPICS system., • Troubleshoot and perform corrective actions or minor repairs on saws and stretchers., • Conduct daily preventive maintenance checks on saws, including lubrication and blade sharpness., • 1-3+ years experience in metal manufacturing, • 1-3+ years experience operating industrial manufacturing machinery, • Forklift experience preferred, not required Apply Now For An Immediate Interview Job Type & Location This is a Permanent position based out of Pennsauken, NJ. Pay and Benefits The pay range for this position is $47840.00 - $47840.00/yr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Directly responsible to the General Manager and/or a delegate. Functionally responsible for operating the saw and stretcher in an efficient and cost-effective manner while maintain safety and quality standards. Regular communication is required with the press crew with regards to any safety or quality issues noticed. MINIMUM QUALIFICATIONS Education/Experience • High school Diploma with some technical background and mechanical aptitude., • Extrusion experience is an asset. Technical Skills/Competence • 1-2 years’ experience in an industrial environment, • Knowledge of machinery and ability to read drawings an asset. Willing to train., • Basic computer skills including MS Windows is required. Other MS software is an asset., • Understanding of measurements, tolerances, basic geometry, and numeracy comprehension., • Ability to lift up to 50lbs independently, and ability to lift up to 100lbs in collaboration with a team member., • Familiarity with extrusion software such as EPICS is an asset. DUTIES AND RESPONSIBILITIES The duties and responsibilities of the Saw & Stretcher Operator are detailed below, but not limited to the following: Saw Operation • Read all specifications and/or notes outlined in the work order and in EPICS., • Follow verbal instructions from the press supervisor and other teammates., • Lay out, set up and operate metalworking machines such as saws, and other hand tools to cut or otherwise shape and form metal stock into parts or products., • Check products for correct shapes, dimensions, and other specifications using calipers and other measuring tools available (including and not limited to ASCONA scans)., • Troubleshoot and perform corrective action or minor repairs to the saw and stretcher., • Perform the required PM checks on the saw daily, for example daily checks on saw lubrication levels, cutting blade sharpness, etc., • Follow work order specifications and packing instructions., • Read and follow all notes in EPICS and apply them to the line on a daily basis., • Required to input information into EPICS such as weight, notes for die variances, etc. on an ongoing basis., • Verify NCRs that apply to the saw., • Update rework/redtag line in EPICS if the material is confirmed good at the saw if required. Must communicate this information with the press leads., • Required to input information regarding low yields on EPICS with an explanation of why and suggestions of corrective actions., • Inspect cut lengths, critical dimensions and visually inspect material using measurement tools (including but not limited to ASCONA scans), • Ensure proper handling of material to maintain quality and good product., • Ensure skids are packed and bundled securely and all material coming off the saw is cleaned, free of defects and is good quality product adhering to our quality standards, • Ensure proper weight is measured and recorded to the minimum tolerance of 40 lbs., • Ensure efficient skid changeovers by being proactive and looking at subsequent work orders., • Effectively communicate any issues with Press Leads, such as poor yield, die variance, weight discrepancies, and scanning issues., • Escalate issues with the maintenance team immediately for any mechanical related downtime such as saw blade malfunction, saw clamp malfunction, etc., • Responsible for maintaining a clean and tidy line with focus on 5S to ensure good housekeeping is followed throughout the shift., • Ensure materials (skids, separators, sandwiches, etc.) are available at the saw station for duration of the shift., • Be proactive in communicating with forklift drivers when materials are required., • Ensure all quality checks are completed and recorded at the required frequency at the saw., • Ensure Ascona scans are completed as per billet entries, and ensure product meet specification, • Escalate issues immediately with quality technicians & the press leads., • Ensure quality checks are conducted for visual & dimensional requirements., • Ensure any material that is out of spec is communicated to the press lead to make a prompt decision on whether it is to be scrapped or rectified., • Discuss any issues (mechanical, work-order related, etc.) with following shift, and ensure enough materials are available for a successful start-up. Stretcher Operation • Run the stretcher (live and dead ends) efficiently as possible and as required to ensure material is cleaned off the table continuously., • Ensure all extrusion pieces that are stretched are straight and twist free, and meet quality requirements (visual A or B)., • Regularly check dimensions and flatness and ensure extrusion is not over stretched., • Responsible for batching at storage table with right number of pieces per batch to avoid overcrowding., • Read and follow all notes in EPICS and update notes as required., • Immediately report any issues before, during or after stretching with press leads., • Communicate with saw crew any concerns regarding issues with dimensions and finish, such as marking bad cavities and batch marking., • Report any malfunction in stretching equipment to the press leads and the maintenance team., • Follow stretching instructions as per work order as required., • Comply with all quality related policies, procedures and system requirements. Company DescriptionALMAG's working environment is one of co-operation, involvement, responsibility, accountability, recognition, and innovation. ALMAG is always looking for highly motivated individuals interested in contributing to our organization.ALMAG's working environment is one of co-operation, involvement, responsibility, accountability, recognition, and innovation. ALMAG is always looking for highly motivated individuals interested in contributing to our organization.

Job Description Landscaper Job Summary • Maintains lawns, sidewalks, driveways, parking lots, fountains, planters, and other grounds features., • Mows and edges lawns, using power mowers, push mowers, and/or edgers., • Cares for lawns by laying mulch, removing weeds, and trimming trees and plants., • Maintains flower beds by pruning, weeding and watering as needed., • Prunes and trims trees, shrubs, and hedges, using shears, pruners, or chain saws., • Plants flowers and trees, • Maintains the ground equipment which may include repairs and preventive maintenance as needed., • Operates powered lawn equipment, such as mowers, weed whackers, electric clippers, and pruning saws., • Maintains the ground equipment which may include repairs and preventive maintenance as needed., • Reports any maintenance concerns or unsafe conditions or repairs to supervisor., • Performs other related duties as assigned or requested., • Experience Required, • Valid PA driver's license required, • Alcohol/drug free candidates will be considered, • Must be able to drive truck and trailer

Job Description At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal Manufacturing is seeking Mid-Senior Level Installers to join our fast-paced, dedicated, and extremely talented team. This role requires a candidate to be based out of Philadelphia, with the ability to work long and varying hours with consistent travel. Responsibilities: • Oversee and manage the receipt of deliveries, ensuring proper protection of job sites., • Strong business acumen with the ability to effectively interact and communicate with clients., • Interpret and effectively utilize architectural drawings for accurate layout and installation., • Trade school education with 10+ years of experience as a finished millwork installer or equivalent experience in related field such as furniture, sculpture, or art installation., • Must possess a valid driver's license and have access to a reliable vehicle., • The ability to read and interpret site, architectural and engineering schematics., • Extensive knowledge of and the ability to utilize finish carpentry tools, materials, and techniques efficiently and safely such as: (router, multi-tools, hand saws, band saw, table saw, joiners, jigs, measurement instruments, laser level, etc.), • Proficiency with computers, smart phones, and tablets., • Willingness and ability to travel as required., • Ability to read plans and installation instructions Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Flexible schedule, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Philadelphia

Job DescriptionBenefits/Perks • Competitive Compensation, • Career Advancement Opportunities, • Overtime Opportunities and Performance Incentives, • Use hand tools, such as shovels, rakes, pruning saws, saws, hedge or brush trimmers, or axes, • Operate vehicles or powered equipment, such as mowers, tractors, twin-axle vehicles, snow blowers, chain-saws, electric clippers, sod cutters, or pruning saws, • Prune or trim trees, shrubs, or hedges, using shears, pruners, or chainsaws, • Gather and remove litter, • Interact with customers in a professional and friendly manner Qualifications:, • Past experience as a landscaper/groundskeeper preferred, • Experience with the use of hand-held and power tools, • Must be able to climb ladders and stairs, comfortably lift 50+ pounds repetitively, and work on your feet for long periods of time, • Willing to work in all weather elements, • Experience with heavy machinery and/or driving trailers a plus, • Valid drivers license and clean background

Job Description At Ace Designs, we love what we do! For over 35 years, we have been in the retail display business where we have established an outstanding reputation for quality and service. Our clients range from large retail chains to smaller boutiques, which allows us accommodate projects big and small. We pride ourselves on being leaders in ingenuity and problem solving as well as delivering on time and on budget. Our products are all custom and manufactured in our building, so we get to see our concepts come to life on a daily basis. To learn more about us visit our website at . We are looking for skilled and capable candidates to be Woodworkers for our first shift, Monday to Friday, 8:00 am – 5:00 pm. To be considered for this position you must have the following: • 2- 5 years’ experience working with wood and sheet products, • Must be proficient with table saws, spindle shapers, both hand held routers and router tables, • Know how to operate power equipment including Air Tools and Electric Table Saws, • Ability to accurately measure a must, • Be detail oriented and maintain quality standards, • Thrive in a fast paced, highly dynamic environment Responsibilities: • Woodcutter, • Cutting wood into different pieces and shapes using various equipment., • Select the appropriate materials, fittings, and tools for each task., • Cutting resources down to size, as needed., • Planning an effective approach to work to ensure that each project is completed on time., • Creating standard and custom components., • Gathering the elements and assembling the final product., • Applying sealant, varnish, and paint, if required., • Inspect each completed item to ensure that it has been cut accurately and that the necessary finishes have been applied If you have these qualifications and are driven to succeed, please email your resume with compensation requirements. We are a drug-free environment and employment is contingent upon successful drug screening. Company DescriptionFor over 35 years, we have been in the manufacturing of retail display business where we have established an outstanding reputation for quality and service. Our clients range from large retail chains to smaller boutiques, which allows us to accommodate projects big and small. We pride ourselves on being leaders in ingenuity and problem solving as well as delivering on time and on budget. Our products are all custom and manufactured in our building, so we get to see our concepts come to life on a daily basis. Every day we make the impossible possible with our outstanding design and production team. To learn more about our exciting work visit our website at over 35 years, we have been in the manufacturing of retail display business where we have established an outstanding reputation for quality and service. Our clients range from large retail chains to smaller boutiques, which allows us to accommodate projects big and small. We pride ourselves on being leaders in ingenuity and problem solving as well as delivering on time and on budget. Our products are all custom and manufactured in our building, so we get to see our concepts come to life on a daily basis. Every day we make the impossible possible with our outstanding design and production team. To learn more about our exciting work visit our website at .

Job DescriptionBenefits: • Competitive salary, • Opportunity for advancement, • Paid time off At Signarama, the world's leading sign franchise, we are looking for a dedicated Production and Design Specialist to join our vibrant team. This role involves designing, producing, and installing high-quality signage while providing excellent service. You will use software, hand tools, and production machines to craft all types of signs and products. If you enjoy creative work and hands-on tasks, this position is perfect for you! Key Responsibilities: • Technical Proficiency: Efficiently operate production equipment such as laminators, plotters, panel saws, and trimmers., • Customer Interaction: Represent our brand professionally both in-store and during on-site installations, ensuring a great customer experience., • Maintenance and Organization: Keep equipment in top condition and maintain a neat workspace., • Community Engagement: Travel locally to assess sites, provide estimates, and perform installations., • Inventory Management: Monitor and manage stock levels to ensure seamless production processes.Professional Growth:, • Gain expertise through Signaramas comprehensive in-store training programs covering sales, product knowledge, production techniques, and more.What We Offer:, • Opportunities for Advancement in a globally recognized brand, • Dynamic Work Environment where no two days are the same, • Supportive Team Culture that values individual contributionsQualifications:, • Comfortable with computers and eager to learn new POS software, • Strong mathematical and spelling skills, • Proficiently use measurement tools, • Physically fit to handle manual tasks including lifting over 80 lbs and climbing ladders

Job Description About us Delva Tool & Machine (DTM) and its 6 locations specialize in precision machining, fabrication, and assembly highly engineered components. With over 175 years of combined experience, 300,000 sq. ft. of floor space, 250 CNC machines and 350 talented employees between 6 locations across the United States and Canada, we leverage our combined expertise and state of the art CNC machining capabilities to deliver quality machined parts to customers all across the globe. Our primary commitment is to provide our customers with a quality product, on-time delivery, and competitive pricing. Core Values • Relentlessly Driven to Excel – We take pride in mastering our craft, pushing ourselves to be the best, and constantly improving. “Good enough” is never enough., • Tech-Forward Problem-Solvers – We embrace challenges with a solution-oriented mindset, thinking critically and adapting quickly to get the job done. We seek out and leverage the best technology and processes, appropriately automating to be more agile and lean., • Accountable & Dependable – We take ownership of our work, meet deadlines, and follow through on our commitment; no excuses and no self-victimizing., • Team-First Mentality – We collaborate, communicate, and support each other, knowing that success comes from effective collaboration. Delva Tool (DTM) is seeking a CNC Machinist for our Cinnaminson, NJ location. The CNC Machinist is responsible for quality parts produced on CNC machines such as, but not limited to, lathes and mills. If you are looking for an organization and career that will match your strong work ethic and passion for success, Delva Tool is a great place to start! Essential Duties and Responsibilities PositionExperienceEducationEssential Duties and Major ResponsibilitiesMachinist I1-2 years' experience as a CNC Machinist or CNC OperatorHigh School Diploma or GED preferred • Operate CNC machine tools such as lathes, mills, grinders, saws., • Load and unload parts, materials, and fixtures as instructed., • Follow established traveler work instructions to produce conforming products., • Perform basic measurements using tools such as calipers, micrometers, and gauges to ensure part conformity., • Monitor machine operation and report irregularities or malfunctions to supervisors., • Deburr, clean, and prepare finished parts for inspection or further processing as required by the traveler and work instructions., • Maintain a clean, safe, and organized work area in compliance with company safety policies., • Assist higher-level machinists with setups and complex tasks as part of skill development.Machinist II 2-4 years' experience as a CNC Machinist or CNC OperatorHigh School Diploma or GED preferred, • Assist with setups and operate a variety of CNC machines to produce precision parts., • Interpret complex engineering drawings, blueprints, GD&T specifications, and work instructions., • Adjust machine settings, offsets, and replace tooling to achieve quality and efficiency standards., • Perform in-process inspections and document results to maintain compliance with quality standards., • Diagnose common machining problems such as tool wear, dimensional drift, surface finish issues., • Train and mentor Machinist I employees in safe machine operation and proper techniques., • Collaborate with engineers, quality staff, and supervisors to troubleshoot and improve processes., • Monitor and maintain tools, machines, and measuring equipment, reporting maintenance needs promptly.Machinist III, Lead5+ years' experience as a CNC Machinist or CNC OperatorHigh School Diploma or GED preferred, • Lead the setup, adjust programming, and operate complex CNC machines, multi-axis machining centers, or specialized equipment., • Help Engineers and CNC programmers optimize machining processes to improve efficiency, reduce scrap, and meet tight tolerances., • Validate CNC programs through first runs and first-article inspections., • Apply advanced knowledge of materials, tooling, feeds, and speeds for difficult or exotic materials., • Serve as a subject-matter expert and mentor for Machinist I and II employees, providing training and guidance., • Interface with engineering and production teams to resolve technical issues and recommend design-for-manufacturing improvements., • Maintain strict adherence to AS9100/ISO standards (or other applicable quality systems) and participate in audits., • Contribute to continuous improvement initiatives, lean manufacturing projects, and 5S activities. Our comprehensive benefits package includes, but is not limited to, a competitive pay rate, accrued vacation time, sick time, paid holidays, 401(k) with company match, health, dental, and vision insurance as well as Short-Term Disability, Long-Term Disability, and life/AD&D insurance. We are a drug-free workplace / Equal Opportunity Employer and Prohibit Discrimination and Harassment of Any Kind: We are committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions are based on business needs, job requirements, and individual experience and qualifications, without regard to a person's sexual orientation, gender identity, gender expression, religion, disability, race, creed, color, sex, age, national origin or ancestry, or any other status protected by the laws or regulations in the locations where we operate. Powered by JazzHR NGIbcOUqE5

Job Description Where commitment matters and success is shared, profit sharing grows with you! Directly reports to the Shift Supervisor the Production Associate must communicate with all plant production personnel. Functionally responsible for the production and quality of material, including it being packed and inspected as per customer requirements. Ensure that a safe working environment is maintained at all times. This will be done by following the Company policies and procedures. We believe that every Employee is responsible to act safely and to model good safety practices. MINIMUM QUALIFICATIONS Education/Experience • Grade 12 education., • Must have good command of English, written and oral., • Should be familiar with MS Office., • Must be capable of using measuring instruments and able to read blueprints/drawings. The duties and responsibilities of the Production Associate are detailed below, but not limited to the following: • Responsible for safely and quality of effectively operating all machines within the department: presses, saws, punch press, drilling, tapping, deburring machines and any other additional equipment that may be purchased in the future, • Racking, un-racking, and inspection of parts through the anodizing line, • Check the machine condition for any issues and/or mechanical problems prior to starting it, • Follow work orders and produce parts according to specifications, • Ensure material is packed in order of priority according to the pack dates indicated on the WIP Report., • Confirm weights and counts are correct., • Check material for hardness and record the readings in EPICS. If material is not within spec for hardness, it must be red tagged ahead of the pack stage and QA must be notified., • Once an order is complete, ensure the correct tagging colors are used based on work order routing., • Adherence to work order instructions are critical such as the notes section for specific customer requirements, • Pack all orders according to the required pack code so that it reaches its final destination intact., • Responsible for inputting data into EPICS throughout the run and upon completion of production, • Required to check samples periodically according to what is outlined by the quality standards stated on the work order, • Ensure first piece sample is verified by another personnel to ensure it meets specifications., • Verify the material being provided matches with what the work order is asking for to ensure all instructions are being followed, • Look for material defects, before & during packing, such as but not limited to scratches, dents, and distortion to the profile., • Perform dimensional inspection according to the requirements on applicable orders., • Shrink wrap material that is shipped in bulk on skids., • Use tape and banding as required to secure & maintain the integrity of the material on the skids., • Enter required data into our system to create packing tickets and apply tickets to skids., • Be curious and ask questions. Make suggestions for improvement & assist in fixing problems., • Maintain clean and organized work environment., • Comply with all quality related policies, procedures and system requirements., • Perform other duties as required.Company DescriptionALMAG's working environment is one of co-operation, involvement, responsibility, accountability, recognition, and innovation. ALMAG is always looking for highly motivated individuals interested in contributing to our organization.ALMAG's working environment is one of co-operation, involvement, responsibility, accountability, recognition, and innovation. ALMAG is always looking for highly motivated individuals interested in contributing to our organization.

Job Description About us Delva Tool & Machine (DTM) and its 6 locations specialize in precision machining, fabrication, and assembly highly engineered components. With over 175 years of combined experience, 300,000 sq. ft. of floor space, 250 CNC machines and 350 talented employees between 6 locations across the United States and Canada, we leverage our combined expertise and state of the art CNC machining capabilities to deliver quality machined parts to customers all across the globe. Our primary commitment is to provide our customers with a quality product, on-time delivery, and competitive pricing. Core Values • Relentlessly Driven to Excel – We take pride in mastering our craft, pushing ourselves to be the best, and constantly improving. “Good enough” is never enough., • Tech-Forward Problem-Solvers – We embrace challenges with a solution-oriented mindset, thinking critically and adapting quickly to get the job done. We seek out and leverage the best technology and processes, appropriately automating to be more agile and lean., • Accountable & Dependable – We take ownership of our work, meet deadlines, and follow through on our commitment; no excuses and no self-victimizing., • Team-First Mentality – We collaborate, communicate, and support each other, knowing that success comes from effective collaboration. Delva Tool (DTM) is seeking a CNC Machinist for our Cinnaminson, NJ location. The CNC Machinist is responsible for quality parts produced on CNC machines such as, but not limited to, lathes and mills. If you are looking for an organization and career that will match your strong work ethic and passion for success, Delva Tool is a great place to start! Essential Duties and Responsibilities PositionExperienceEducationEssential Duties and Major ResponsibilitiesMachinist I1-2 years' experience as a CNC Machinist or CNC OperatorHigh School Diploma or GED preferred • Operate CNC machine tools such as lathes, mills, grinders, saws., • Load and unload parts, materials, and fixtures as instructed., • Follow established traveler work instructions to produce conforming products., • Perform basic measurements using tools such as calipers, micrometers, and gauges to ensure part conformity., • Monitor machine operation and report irregularities or malfunctions to supervisors., • Deburr, clean, and prepare finished parts for inspection or further processing as required by the traveler and work instructions., • Maintain a clean, safe, and organized work area in compliance with company safety policies., • Assist higher-level machinists with setups and complex tasks as part of skill development.Machinist II 2-4 years' experience as a CNC Machinist or CNC OperatorHigh School Diploma or GED preferred, • Assist with setups and operate a variety of CNC machines to produce precision parts., • Interpret complex engineering drawings, blueprints, GD&T specifications, and work instructions., • Adjust machine settings, offsets, and replace tooling to achieve quality and efficiency standards., • Perform in-process inspections and document results to maintain compliance with quality standards., • Diagnose common machining problems such as tool wear, dimensional drift, surface finish issues., • Train and mentor Machinist I employees in safe machine operation and proper techniques., • Collaborate with engineers, quality staff, and supervisors to troubleshoot and improve processes., • Monitor and maintain tools, machines, and measuring equipment, reporting maintenance needs promptly.Machinist III, Lead5+ years' experience as a CNC Machinist or CNC OperatorHigh School Diploma or GED preferred, • Lead the setup, adjust programming, and operate complex CNC machines, multi-axis machining centers, or specialized equipment., • Help Engineers and CNC programmers optimize machining processes to improve efficiency, reduce scrap, and meet tight tolerances., • Validate CNC programs through first runs and first-article inspections., • Apply advanced knowledge of materials, tooling, feeds, and speeds for difficult or exotic materials., • Serve as a subject-matter expert and mentor for Machinist I and II employees, providing training and guidance., • Interface with engineering and production teams to resolve technical issues and recommend design-for-manufacturing improvements., • Maintain strict adherence to AS9100/ISO standards (or other applicable quality systems) and participate in audits., • Contribute to continuous improvement initiatives, lean manufacturing projects, and 5S activities. Our comprehensive benefits package includes, but is not limited to, a competitive pay rate, accrued vacation time, 10 paid holidays, 401(k) retirement plan with a 4% company match (100% vested on day one), medical, dental, and vision insurance, as well as Short-Term Disability, Long-Term Disability, Life/AD&D insurance, and more! We are a drug-free workplace / Equal Opportunity Employer and Prohibit Discrimination and Harassment of Any Kind: We are committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions are based on business needs, job requirements, and individual experience and qualifications, without regard to a person's sexual orientation, gender identity, gender expression, religion, disability, race, creed, color, sex, age, national origin or ancestry, or any other status protected by the laws or regulations in the locations where we operate. Powered by JazzHR 8C9R423wcE

Job DescriptionBenefits: • Paid Holidays, • Overtime opportunities, • Company cell phone, • Housing discount, • 401(k), • Free uniforms, • Paid time off In addition, please: Take personal responsibility for yourself and pride in a job well done Enjoy using your problem solving skills and learn new things quickly Multi-task with a positive attitude Be able to work individually as well as within a team environment Be flexible, dedicated, detail-oriented and personable while working in a fast paced environment Responsibilities: • Use hand tools, such as shovels, rakes, pruning saws, saws and hedge or brush trimmers., • Operate vehicles or powered equipment, such as mowers, tractors, snow blowers, chain-saws, electric clippers, sod cutters, or pruning saws, • Water lawns, trees, or plants, using portable sprinkler systems, hoses, or watering cans, • Prune or trim trees, shrubs, or hedges, using shears, pruners, or chainsaws, • Gather and remove litter, • Interact with customers in a professional and friendly mannerQualifications:, • Past experience as a landscaper/groundskeeper preferred, • Experience with the use of hand-held and power tools, • Must be able to climb ladders and stairs, comfortably lift 40+ pounds repetitively, and work on your feet for long periods of time, • Willing to work in all weather elements

Job DescriptionBenefits: • Flexible schedule, • Opportunity for advancement, • Training & development, • Competitive salary, • Free uniforms, • Paid time off, • Company parties, • Team-oriented culture, • Community Impact, • Opportunity for career growth, • Paid training & development programs, • Competitive compensation, • Free uniformsLightspeed Restoration is a fast-growing leader in the restoration and remediation industry, proudly serving the Greater Philadelphia area. We help homeowners and businesses recover from water, mold and fire damage eventswith speed, professionalism, and compassion. Our team is committed to delivering high-quality results while upholding the highest standards of safety, communication, and customer care. Why Join Us? At Lightspeed Restoration, we believe in being the best, not the biggest. Our mission is to provide exceptional service with transparent pricing, backed by quality, integrity, and genuine care for our customers. Our reputation is built on doing the right thing and delivering results people can trust. Our employees are the heart of our mission. We invest heavily in training, certifications, and career developmentbecause when our people grow, our business grows. You wont be just another employee; youll be part of a team that makes a real impact during customers most difficult moments. Job Summary: The Lightspeed Restoration Field Technician provides 24/7 emergency water damage recovery, mold remediation, fire restoration, and indoor air quality services in homes and buildings. Field Technicians work directly under the supervision of a Lead Technician, Crew Supervisor, or Project Manager in a team atmosphere. The Supervisor will assign various tasks to the field technician to complete as part of the project as a whole. Typical Duties Include: • Light demolition and removal of finished building materials from the job site, • Operating water collection vacuums or pumps to extract standing water from inside structures, • Detailed, fine cleaning including vacuuming, brushing, and damp wiping surfaces and building contents, • Setting or adjusting equipment for drying or filtration, • Cleaning HVAC / air duct & exhaust systems using collection vacuums, rotary and stationary, • Squatting, crawling, and ladder work are often required to access all areas of a home or building, • Demonstrate proper, safe operation of battery-operated and corded power drills, hammer drills, circular saws, reciprocating saws, • Demonstrate safe lifting, pushing, pulling, and ladder-climbing practices, • Demonstrate safe chemical storage, labeling, and use practices, • Strong communication skills, • Excellent customer service skills, • Ability to operate PC and mobile devices, • Exhibit a professional, neat appearance, • Ability to lift 75 lbs, • Valid drivers license with satisfactory driving recordSafety Gear Provided:, • PPE, • Gloves (leather, nitrile, or coated cloth depending on application), • Safety Glasses or Goggles, • N-95 Respirators, • Poly Spun Tyvek style suits with hood and foot protection, • Shoe Covers, Knee Pads, and Muck Boots, • Hard Hats, Ear Protection, and steel-toe shoes may be required, depending on site application, • Fall protection for aerial workQualifications:, • No experience is required, but 1-2 years of relevant experience is preferred. We will fully train and certify the right person. Were looking for someone with a great attitude, strong work ethic, and eagerness to learn the restoration trade the right way., • Working knowledge of residential and/or commercial construction practices is a strong plus, • Self-motivated and growth-oriented, • Able to work efficiently and effectively in a team environmentWho Were Looking For, • We are seeking a hardworking, hands-on, mechanically inclined individual who loves using their tools, solving problems, and taking pride in a job well done.

Job DescriptionThe AdvantaClean Field Technician provides mold remediation, air duct & dryer vent cleaning, emergency water damage recovery, and installation of moisture control solutions in homes and buildings. Field Technicians work directly under the supervision of a Lead Technician, Crew Supervisor, or Project Manager in a team atmosphere. The Supervisor will assign various tasks to the field technician to complete that as part of the project as a whole. Typical Duties Include: • Light demolition / removal of finished building materials, • Project cleanup, bagging, and removing debris to jobsite collection bin or vehicle for haul off, • Operating water collection vacuums or pumps to extract standing water from inside structures, • Detailed, fine cleaning including vacuuming, brushing, and damp wiping surfaces and building contents, • Hanging or laying plastic for barricades or barriers using mechanical fasteners, tape, and adhesives, • Setting or adjusting equipment for drying or filtration, • Cleaning HVAC / air duct & exhaust systems using collection vacuums, rotary and stationary, • Digging, raking, and spreading drainage aggregate, • Squatting, crawling, and ladder work are often required to access all areas of a home or building, • Demonstrate proper, safe operation of battery operated and corded power drills, hammer drills, circular saws, reciprocating saws, • Demonstrate safe lifting, pushing, pulling, and ladder climbing practices, • Demonstrate safe chemical storage, labeling, and use practicesQualifications:, • No experience required!, • Experience in home services or construction fields is a strong plus, • Working knowledge of residential and / or commercial construction practices is a strong plus, • Must be a self-starter, • Able to work efficiently and effectively in a Team environment, • Strong verbal and written communication skills, • Excellent Customer Service skills, • Working knowledge of basic PC operations, • Exhibit a professional, neat appearance, • Ability to lift 75 lbs, • Valid drivers license with satisfactory driving recordSafety Gear Provided:, • PPE, • Gloves (leather, nitrile, or coated cloth depending on application), • Safety Glasses or Goggles, • N-95 Respirators, • Poly Spun Tyvek style suits with hood and foot protection, • Shoe Covers, Knee Pads, and Muck Boots, • Hard Hats, Ear Protection, and Steel Toe Shoes may be required, dependent on site application, • Fall protection for aerial workBenefits:, • Team-oriented culture, • Community impact, • Training programs, • Competitive compensation, • Shift differential for night work

Responsibilities: Cuts, trims and prepares raw meat for sale using saws, knifes, grinder, and tenderizer.

Job Description Thompson First Group is seeking Assemblers for contract to hire positions with a local client in Cinnaminson, NJ. Candidates that have a background working with with power tools, grinders, impact guns, and circle saws are encouraged to apply. Responsibilities: • Accident prevention – actively identify, correct and/or report safety hazards to prevent accidents., • Actively identify and pursue cost reduction and efficiency/profit improvement opportunities., • Support the ISO 9001 Quality Management System and the Client Quality Policy calling for self-inspection of your work product., • Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials., • Positions parts and subassemblies by using templates or reading measurements., • Assembles components by examining connections for correct fit; fastening parts and subassemblies., • Verifies specifications by measuring completed component., • Resolves assembly problems by altering dimensions to meet specifications; notifying supervisor to obtain additional resources., • Maintains safe and clean working environment by complying with procedures, rules, and regulations., • Documents actions by completing production and quality forms., • Contributes to team effort by accomplishing related results as needed., • Lifting production objects of up to 50 lbs., • Performs other duties as assigned, • Must be able to fulfill essential job function in a consistent state of alertness and safe manner. Thompson First Group is an equal opportunity employer and participates in E-Verify. All applicants will be considered for employment regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law.

Job Description At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal is looking for a woodshop CNC Operator + Programmer will the ability to operate both 5 axis pod + rail and nested based CNC router machines to assist in the fabrication process of our products. This role will operate on a 4 day/10hours a day, 40 hour work week of 6:30AM-5:00PM Monday-Thursday. Responsibilities: • Under minimal supervision set up and safely operate CNC router machines, perform basic maintenance and upkeep, as well as maintain machine parts, tools, and equipment., • Read blueprints, CAD models, and technical drawings for programming and machine operation., • Work safely in a collaborative environment adhering to OSHA requirements and safety procedures., • Minimum 1-3 years experience in operating 5 axis pod + rail and/or nested base CNC routers., • Minimum 1-3 years experience with CAD/CAM software such as Cabinet Vision and Alphacam., • Proficient in using basic handheld power tools such as impact drivers, drills, saws, etc., • Experience in cabinet construction and furniture making., • Punctual, reliable individual who can work full time on a 4 day, Monday - Thursday 6:30AM - 5:00PM shift in the Frankford area of Philadelphia. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Flexible schedule, • Health insurance, • Life insurance, • Paid time off, • Referral program, • 4 Day Work Week (6:30AM-5:00PM M-Th), • Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

Job Description Directly responsible to the General Manager and/or a delegate. Must communicate with all plant production personnel. Functionally responsible for the production and quality of material, including it being packed and inspected as per customer requirements. Ensure that a safe working environment is maintained at all times. This will be done by following Company policies and procedures. We believe that every Employee is responsible to act safely and to model good safety practices. DUTIES AND RESPONSIBILITIES The duties and responsibilities of the Production Associate are detailed below, but not limited to the following: • Responsible for safely and quality of effectively operating all machines within the department: presses, saws, punch press, drilling, tapping, deburring machines and any other additional equipment that may be purchased in the future, • Racking, un-racking, and inspection of parts through the anodizing line, • Check the machine condition for any issues and/or mechanical problems prior to starting it, • Follow work orders and produce parts according to specifications, • Ensure material is packed in order of priority according to the pack dates indicated on the WIP Report., • Confirm weights and counts are correct., • Check material for hardness and record the readings in EPICS. If material is not within spec for hardness, it must be red tagged ahead of the pack stage and QA must be notified., • Once an order is complete, ensure the correct tagging colors are used based on work order routing., • Adherence to work order instructions are critical such as the notes section for specific customer requirements, • Pack all orders according to the required pack code so that it reaches its final destination intact., • Responsible for inputting data into EPICS throughout the run and upon completion of production, • Required to check samples periodically according to what is outlined by the quality standards stated on the work order, • Ensure first piece sample is verified by another personnel to ensure it meets specifications., • Verify the material being provided matches with what the work order is asking for to ensure all instructions are being followed, • Look for material defects, before & during packing, such as but not limited to scratches, dents, and distortion to the profile., • Perform dimensional inspection according to the requirements on applicable orders., • Shrink wrap material that is shipped in bulk on skids., • Use tape and banding as required to secure & maintain the integrity of the material on the skids., • Enter required data into our system to create packing tickets and apply tickets to skids., • Be curious and ask questions. Make suggestions for improvement & assist in fixing problems., • Maintain clean and organized work environment., • Comply with all quality related policies, procedures and system requirements. MINIMUM QUALIFICATIONS Education/Experience • Grade 12 education., • Minimum 1 year experience in manufacturing, using variety of machining, packing, and handling material. Technical Skills/Competence • Must have good command of English, written and oral., • Should be familiar with MS Office, • Must be capable of using measuring instruments and able to read blueprints/drawings., • Profit Sharing, • Education Assistance Program, • Social Events, • Safety Shoe and Glasses Allowance, • Internal Growth and Development, • Health and Dental, • Life and AD&D, • Vision, • Critical Illness Insurance, • Long Term Disability

Job Description At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal Manufacturing is seeking Cabinet Makers to join our fast-paced, dedicated, and extremely talented team. Candidates should have a experience with cabinet/ furniture making, strong problem solving skills, and cabinet installation experience. They will be responsible for performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. This role will operate on a 4 day, 10 hour work week of 6:30AM-5:00PM Monday-Thursday. Responsibilities: • Fabrication and final assembly of complex millwork including kitchens, bars, credenzas and feature walls., • Fabricate based off of shop drawings and blueprints., • Uphold our standards of ultra high-end product quality., • Work independently and within a group to meet project deadlines., • Minimum 5 years of hands-on experience in cabinet making., • Strong knowledge in both solid woods and engineered materials., • Versed in various types of cabinet construction and wood joinery., • Experience with wood industry shop equipment such as sliding table saws, edge-banders, shapers, wide-belt sanders, etc., • Skilled with handheld power-tools such as routers, drill/drivers, track saws, etc., • Ability to read blueprints and technical drawings., • Excellent attention to detail and precision in measurements., • Good problem-solving skills and ability to work independently or as part of a team, • A track record of accountability and adherence to safety protocols. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Flexible schedule, • Health insurance, • Life insurance, • Paid time off, • Referral program, • 4 Day Work Week (6:30AM-5:00PM M-Th), • Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)