Saws jobs in Jacksonville, FloridaCreate job alerts

Job Description Position Type: Full-time, Non-Exempt, Hourly Reports to: General Superintendent/Fabrication Manager Supervisory Responsibility: None Pay Rate: $25-$35 an hour Our client, a leading provider of custom power augmentation and energy plant solutions for power generation and utilities, data center among other industries and other markets is looking for a 1st Class Structural Fitter to join their team. Job Responsibilities: • Fluent in understanding job specification, blueprint reading, target point measurements, true /plumb /square checking, and any necessary torque requirements, for large industrial structural steel systems., • The ability to cut, prep, fit and tack small to large; HSS box tubes, Angle, W-members, Flat Plate, etc., from various material types through true-plumb-square; into weld ready status, using isometric and structural drawings, while adhering to specific fit tolerance requirements., • The ability to properly select, measure, hand dress, score and cut with torch, air arc, plasma, grinder, power saws, hand tools, etc., as necessary to prepare metal surfaces for welding process to be completed per job specific requirements., • Installation knowledge of all forms of structural system hangers, supports, braces, etc., from temporary through jamb-nut completion., • Strong structural aptitude and problem solver who can understand and follow instruction., • Accountability for completion of daily work assignments while monitoring quality, safety, and health regulations., • Operate overhead cranes and or forklifts, while adhering to industry standard practices of safe rigging systems and techniques., • Safely and efficiently direct and monitor two or more helpers., • Documentation of all quality reporting methods employed per SEA Quality Standards., • Complies with all company policies, procedures, and safety requirements and is physically / medically qualified to wear required PPE per OSHA standards., • Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review., • Collaboration Skills, • Reliable Attendance, • Decision Making, • Leadership, • Communication Proficiency; Written and Verbal, • Ethical Conduct, • Problem Solving, • Organizational Skills, • Thoroughness Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand, walk, use hands to finger, handle, or feel, and reach with hands and arms. The employee is occasionally required to sit, climb or balance, and stoop, kneel, crouch, or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Expected Hours of Work: This is a full-time position. First shift days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Second shift days and hours of work are Monday through Thursday, 3:00 p.m. to 1:30 a.m. Occasional weekend work may be required as job duties demand. Travel: Travel is primarily not required except for local travel during the business day. Required Education and Experience: • Basic math and language skills required., • Knowledge of threading, grinding, welding, brazing, rigging, plasma cutting, and gas arc cutting., • 6+ years of experience in Industrial Structural Fitting., • Tack Welding Ability. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Job description APPLY IN PERSON/PAY IS BASED UPON EXPERIENCE Welder/ Mechanic & Shop Fabricator Position Job Description: Welding using MIG, Stick and TIG processes with sheet metal experience. Westside Electric has been in business for over 50 years we are family owned. Westside Electric specializes in the rewind and recondition of electrical motors and large generators. We are looking for Experienced Welder & Shop Fabricator to join our family including mechanical repairs. Essential Duties & Responsibilities: Position, layout, align and fit components together for electric motor enclosures. Set-up equipment and weld parts using arc, gas shield arc, or gas welding equipment. Weld with steel, stainless and aluminum (Bearing Journals on Rotors). Babbitt Bearing Repairs. Commutator Tig welding. May assemble parts by bolting or riveting. Bolting and assembly of various items. Use of band saw. Use a measuring devices to read blueprints to specifications or duplicate items. Analyze engineering drawings, blueprints, specifications, sketches, work orders, to plan layout, assembly, and welding operations. Weld components in flat, vertical, or overhead positions. Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys. Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding. Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools. Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments. Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals. Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives. Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment, such as flame-cutting torches or plasma-arc equipment. Signal overhead crane operations to move large work pieces. Mark or tag material with proper job number, piece marks, and other identifying marks as required. Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. Remove rough spots from work pieces, using portable grinders, hand files, or scrapers. Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter. Clean or degrease parts, using wire brushes, portable grinders, or chemical baths. Hammer out bulges or bends in metal work pieces. Use fire suppression methods in industrial emergencies. Operate safety equipment and use safe work habits. May be expected to assist in other manufacturing production areas. All other duties as assigned. Adhere to all company policies. Observe all safety procedures and policies and use proper protective equipment (especially eye, ear protection and steel toe shoes/boots, gloves, etc.). Keep work area clean and organized. Report all injuries, near misses and accidents immediately to a supervisor. Required Skills & Experience High school diploma or general education degree (GED) and relevant experience and/or training; or equivalent combination of education and experience. Must have MIG, TIG and sheet metal welding experience. Military certification a plus. Must be able to read and understand mechanical and electrical drawings as well as welding signs/symbols. Must be able to read a tape measure and convert fractions to decimals and decimals to fractions. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Benefits Offered • Medical, • Dental, • Vision, • Gap, • Life Insurance, • 401K Job Type: Full-time Salary: Based upon experience. Job Type: Full-time Pay: $25.00 - $30.00 per hour (BASED ON EXPERIENCE) Typical start time: • A job for which military experienced candidates are encouraged to apply, • A good fit for applicants with gaps in their resume, or who have been out of the workforce for the past 6 months or more Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Shift: • 8 hour shift Experience: • Welding: 1 year (Preferred) Ability to Commute: • Jacksonville, FL 32226 (Preferred) Ability to Relocate: • Jacksonville, FL 32226: Relocate before starting work (Required) Work Location: In person

Job DescriptionDescription: General Responsibilities Perform work for Providence and New Life involving the skills of maintenance or craft occupations to keep machines, mechanical equipment, or the structure of Providence and New Life in repair. Duties are tasked from work orders and may involve repairing equipment, carpentry, repairing electrical or mechanical equipment, installing equipment, and building repairs. • Ability to work safely by following policies and procedures in a general industry work environment., • Troubleshoot, maintain, and repair facility conditions and equipment., • Ability to perform preventative and corrective maintenance in a team atmosphere or alone., • Effective communications skills are required., • General responsibilities will include emergency and preventative facility related maintenance to repair machines, equipment, or structures, using tools such as hammers, hoists, saws, drills, wrenches, etc. Each team member will complete the tickets assigned to him/her and will note on the software the status of that ticket, communicating with your supervisors and the ticket owner. Must be able to effectively communicate with supervisors, peers, and contractors and establish and maintain interpersonal relationships. Schedule Responsibilities The schedule for the Facilities Technician will be dictated by the Facilities Director and/or Manager as needed by the corporation. It is the responsibility of the individual occupying the position to be punctual and follow scheduling. Job skills Knowledge and Abilities: Individual must be an organized, self-starter with above average problem-solving ability. Also, you must be able to work alone and unsupervised. Most importantly, you must be able to work as part of a multi-cultural, multi-disciplined team while achieving your highest potential performance. Skills are required to perform multiple tasks with a need to upgrade skills to meet changing job conditions. Specific skill-based competencies required to satisfactorily perform the functions of the job include operating equipment used in skilled trades, power and hand tools, adhering to safety practices, and handling hazardous materials. Efficiency It is understood and expected that all personnel maintain an efficient work process by keeping to the needs at hand, keeping conversations to a minimum, working at an efficient pace, staying on task, streamlining where possible, and organizing your steps. Personnel should organize their effort to accomplish as much as possible each day at work. Flexibility New life Christian Fellowship and Providence School both have a strong people-oriented emphasis. It is required that the members of the Facilities Department remain flexible to change. Additionally, it is imperative that the Facilities Personnel understand that all job descriptions are subject to change. Changes will be made based on the needs of New Life and/or Providence and the needs of the coverage for the Facilities Department. Requirements: 2-years experience in a facilities maintenance group needed. Ability to use shop equipment such as sanders, drill press, forklift, and scissor lift. Diagnose issues from work orders and be able to fix and resolve them using tools such as hammers, hoists, saws, drills, wrenches, etc. Must be teachable and cooperative. Must speak, understand, read, and write in English. High school diploma or GED needed. Must be physically able to lift and/or carry up to 50 pounds. Must be physically able to climb up and down a ladder for repairs and painting and perform general physical activities such as bending, kneeling, standing, walking, squatting, reaching, grabbing, holding, lifting, pulling, etc. Must have a driver’s license and be a safe driver. Maintain an orderly and clean work environment, clean up after yourself after each job, and put tools and equipment back in their proper space so others have access to the shared items.

Job DescriptionDescriptionIf you are an experienced SUE Crew Chief who has desire to have your ideas heard and accomplishments acknowledged, we'd love to hear from you. As the SUE Crew Chief, you will be responsible for leading the field effort for various Underground Utility designating & locating projects. Your Primary Responsibilities will include • Locate underground utilities using non-destructive methods, including electromagnetic induction (EMI) and ground penetrating radar (GPR)., • Operate vacuum excavation trucks and related equipment (e.g., air compressors, vacuum hoses, air lances, jackhammers, concrete saws, pogo-tampers, hand tools)., • Perform utility mark-outs, surveying tasks, and subsurface utility engineering (SUE) field activities with minimal supervision., • Document field data accurately through sketches, photos, spreadsheets, daily reports, and written summaries., • Read and interpret technical documents., • Perform routine maintenance and basic troubleshooting on vacuum excavation systems and field equipment., • Train on safe operation and maintenance of vehicles and tools in accordance with company safety standards., • Support and mentor junior field staff as needed., • Assist senior team members with project coordination involving clients, agencies, subcontractors, and design teams., • Maintain high standards of quality control and attention to detail in all aspects of fieldwork., • Communicate effectively with internal teams and external stakeholders., • Demonstrate reliability, initiative, and the ability to work independently while knowing when to seek guidance., • High school diploma or GED is strongly preferred., • Five (5+) years as SUE Technician I, Private Utility Locator, or related experience., • Basic knowledge of Land Surveying. (optional), • Strong communication skills., • Demonstrated leadership skills., • Positive, “can-do” attitude., • Ability to work outside in all seasons and conditions., • Ability to walk, kneel, squat, and stand., • Ability to lift 60lbs., • Ability/willingness to travel for work assignments, including overnight assignments., • Ability to pass pre-employment drug screening and random thereafter., • Valid driver’s license with a clean driving record is required., • Commercial Driver’s License (CDL) preferred, • Excellent compensation package, • Outstanding holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Mentorship Program, • Tuition Reimbursement, • Parental Leave, • Competitive health and dental insurance premiums, • Variety of voluntary benefit options, • Short-Term Disability/Long-Term Disability, • Company-furnished life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreDRMP is a Drug and Alcohol Free workplace, an Equal Employment Opportunity employer and E-Verify employer. #LI-SP1

Job Description Duties and Responsibilities • Advanced understanding of and ability to accomplish, • NAVSEA Standard Item (NSI) 009-73 requirements, • Inspection, testing, installation, removal, and repair of shipboard electrical cabling and electronic equipment, • Cable installations include banding, boxes, connectors, equipment, penetrations, cableway, hangers, and associated components, • MCT, MCP, Stuffing Tube opening, packing, closing, and testing, • Bonding and Grounding of Electrical Equipment, • NSI 009-25 requirements, • EIMB, EPISM and Electrical MIL standards, • Electrical troubleshooting, use of multimeters, megohmmeters and network testers, • Initiate Tagout/ Work Authorization Forms (WAF), • Interpret and breakdown work scope from drawings (arrangement, block-wiring, isometric, cable routing, power, lighting, and IC system removal/installation), • Electrically install Manual Bus Transfers (MBT), Automatic Bus Transfers (ABT), Switchboards, and Transformers, • Electrical Fit up – use of grinders, reciprocating saws, drills, • Lead small electrical teams in the execution of an electrical work item or ship alteration, • Track and report job physical progress and budget performance to your supervisor, • Required to have personal tools to include but not limited to, • Multimeter, • Hand tools, • Hardwire termination tools (Insulated and Non-Insulated Ratcheting Crimpers, etc.), • Perform all work in accordance with the established policies and procedures detailed in the Waveforce Electrical Safety Manual Experience Requirements • Three (3) years direct experience in shipboard electrical installation and repair services, • High School Diploma or Equivalent, • Must be at least 18 years of age, • NSI 009-73 Qualified Connector Fabrication Certification (preferred), • NSI 009-123 Qualified Fiber Optic Handling (preferred), • Must be able to pass Waveforce Electrical pre-employment drug and background screening., • Must be able to obtain government facility and/or shipyard access, to include a DBIDS credential, as required by work locations, • Must successfully complete OSHA 10 Hour Training, Virginia Ship Repair Association (VSRA) Safety Orientation and all required Environmental, Health and Safety orientation training after initial employment, but prior to shipboard work 0keZYW13Vu

Job Description Job Title: Assembler/Finisher Shift: 1st 6:00am-2:30pm M-F Pay: $17.50-$18/hr Location: Downtown, Jacksonville (32204) Job Description We are seeking a skilled Assembler and Finisher to join our team. The successful candidate will be responsible for assembling and finishing the final product using various hand and power tools. This role requires a keen eye for detail and the ability to work with precision, ensuring high-quality output. Responsibilities • Assemble and finish the final product using hand and power tools., • Scrape off splatter from welds and hand/spray paint portions of the product., • Move and stack products with assistance., • 1+ years of experience using hand and power tools, including table saws and saw-zas., • Proficiency in reading a tape measure., • 1+ years of experience in assembly work., • Ability to read and interpret blueprints. Become part of an employee-owned company where your contributions truly matter. Employees receive stock in the company, which vests after five years. Enjoy comprehensive benefits including medical, dental, vision, and a 401k plan starting after the contract period. Work Environment Work in a non-climate-controlled fabrication shop with two shift options: 1st shift from 6:00 AM to 2:30 PM and 2nd shift from 2:00 PM to 10:30 PM. Note that the 2nd shift will require training on the 1st shift for approximately two weeks. Job Type & Location This is a Contract to Hire position based out of Jacksonville, FL. Pay and Benefits The pay range for this position is $17.50 - $18.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Olgoonik is an Equal Opportunity Employer Overview: Manufacture and repair wood containers, skids, and platforms used in packing, storage and shipping operations. Receive daily work assignments from Woodworker Lead. Primary Responsibilities: • Use plans, blueprints, drawings to select, measure, cut, form, and fabricate wooden containers and platforms., • Repair containers as required during receipt and COSIS processes., • Provide packing, set assembly and shipping support duties as required., • Perform all other duties as assigned. Supervisory Responsibilities: • Perform supervisory duties, as assigned. Education and/or Experience: • Must have High School Diploma or GED (May substitute experience with education on a year-by-year basis)., • Minimum one year of general experience., • Minimum one-year specific experience using wood shop tools, fabricating containers, or framing construction., • Ability to read blueprints, measure fabrication materials, identify various materials for construction of wood containers; use saws, planers, sanders, drills, etc., • Must have demonstrated skill to assemble/fabricate wooden containers, mount out boxes, stands, chests, skids and platforms. Knowledge, Skills, and Abilities: • Must be proficient with Microsoft Suite of products including, Word, Excel, Access and Outlook software., • Must demonstrate a good attitude and ability to work as a member of a team., • Position requires self-motivation and the ability to work effectively under a minimum of supervision., • Must be able to multi-task efficiently, work in a fast-paced environment on multiple projects, and have a strong attention for detail. Certificates, Licenses, Registrations: • None Required. Security Clearance: Secret Level May Be Required • Must have a current US Government SECRET Personnel Security Clearance or be able to successfully complete a U.S. government administered Investigation., • Must be a U.S. Citizen., • Must also be able to maintain a US Government SECRET clearance. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 25 pounds. Work Environment: Works in shop/warehouse environment. Work involves repetitive motions and standing for long periods of time. Work is of a physical nature and requires the incumbent be able to lift 50 lbs overhead and/or repetitively. Outside work in hot and cold or wet weather is occasionally required. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

Job Title: Acoustical Ceiling Mechanic Location: Jacksonville, FL Employment Type: Full-Time Work Status: Non-Exempt Reports To: Branch Manager Company Overview Acousti is a leading provider of drywall and acoustical ceiling solutions, specializing in high-quality construction services for commercial and government projects. With over 80 years of experience, we are committed to delivering excellence, safety, and innovation. Our success stems from a talented and dedicated team that collaborates to deliver exceptional results. Your Role at Acousti As an Acoustical Ceiling Mechanic, you will play a critical role in the installation of acoustical ceiling grids and tiles on commercial and government projects. Your expertise and dedication will ensure that each project is completed to the highest standard of quality and precision. Responsibilities In this role, you will: • Read and interpret project blueprints to determine job requirements, • Inspect drywall partitions, mechanical mountings, and masonry surfaces for plumb and level using a laser or water level, • Hang or mechanically fasten support wires for acoustical ceiling grids from building structures, • Install acoustical ceiling main runners and cross runners, ensuring proper alignment and fit, • Nail or screw molding to walls and seal joints between ceiling tiles and walls, • Scribe and cut edges of tiles to fit where wall molding is not specified, • Measure and mark surfaces to layout work according to blueprints and drawings, • Cut tiles for fixtures and borders using keyhole saws and insert tiles into supporting frameworks, • Operate scaffold, aerial lifts, ladders, stilts, and other equipment as needed, • Use powder-actuated tools and lasers to complete installations, • Work both indoors and outdoors as project requirements dictate, • Maintain construction schedules and phasing to ensure timely completion of projects, • Perform other duties as assigned by the manager What We're Looking for in You To succeed in this role, you should have: • 2+ years of commercial acoustical ceiling installation experience (required), • Proficiency with materials, methods, tools, and plans/layouts/prints involved in acoustical ceiling installation, • Tools and reliable transportation to project sites, • Ability to lift up to 75 pounds and stand or walk for up to 8 hours per day, • The capability to work independently and collaboratively as part of a team, • Ability to pass a drug test and background check Education Requirements Preferred: High School Diploma Why Join Acousti? At Acousti, we offer more than just a job; we provide opportunities for growth and development in a supportive, collaborative environment. As a valued member of our team, you'll enjoy: • Competitive Compensation: Based on experience, with weekly pay, • Comprehensive Benefits Package: Including health, dental, and vision plans, • Retirement Savings: 401(k) program with company matching, • Company-Paid Insurance: Life insurance and long-term disability coverage, • Optional Benefits: Supplemental life insurance and short-term disability, • Paid Time Off (PTO): Vacation, sick leave, and paid holidays, • Career Training: Access to training programs and career advancement opportunities, • Employee Assistance Program (EAP): Support for personal and professional challenges Employee Perks Acousti values its employees and offers several perks to enhance your work-life balance and career development: • Learning & Development: Tuition reimbursement and access to training programs, • Team-Building Activities: Company-sponsored events and collaborative culture, • Employee Referral Program: Earn rewards by referring others to join our team This job description is not an exhaustive list of all functions that the employee may be required to perform, and the employee may be required to perform additional functions. Acousti Engineering reserves the right to revise the job description at any time and to assign additional duties and responsibilities as needed. Employment with Acousti Engineering is at-will. The employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations may be made to enable qualified individuals with disabilities to perform essential functions of their job, absent undue hardship. Acousti Engineering is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, compensation inquiries, discussions or disclosures, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. (41 CFR * 60-1.4(a), 60-300.5(a) and 60-741.5(a)) Additional Job Information This job description is not an exhaustive list of all functions that the employee may be required to perform, and the employee may be required to perform additional functions. Acousti Engineering reserves the right to revise the job description at any time and to assign additional duties and responsibilities as needed. Employment with Acousti Engineering is at-will. The employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations may be made to enable qualified individuals with disabilities to perform essential functions of their job, absent undue hardship. Acousti Engineering is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, compensation inquiries, discussions or disclosures, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. (41 CFR * 60-1.4(a), 60-300.5(a) and 60-741.5(a))

Job Description Industrial Automation Technician Position Type: Full-time, Non-exempt, Hourly Reports to: Facilities Maintenance Manager Supervisory Responsibility: None Location: Jacksonville, FL Manufacturing Facilities Company Summary Stellar Energy is a trusted provider of turnkey liquid-to-chip cooling solutions for the world’s leading data center and industrial manufacturing customers. As computing demand and industrial processes continue to grow, modern facilities require cooling infrastructure that can scale quickly, efficiently, and reliably. Our modular approach enables high-volume production while maintaining the flexibility to customize each solution. From Central Utility Plants to Coolant Distribution Units, Stellar Energy delivers scalable cooling infrastructure designed to support the rapid expansion of data centers and mission-critical industrial operations. Backed by deep engineering expertise and large-scale manufacturing capability, Stellar Energy helps customers deploy critical infrastructure faster and with confidence. Summary Objective We are seeking a dedicated and self-motivated professional CNC Automation Maintenance Technician - With expertise in operating, troubleshooting, and repairing Voortman and Pema metalworking machinery. The ideal candidate is skilled in conducting routine maintenance and repairs as well as troubleshooting mechanical, electrical, pneumatic, and hydraulic systems to ensure optimal equipment performance and long-term reliability. Guided by the principle of Improvement through Excellence, our maintenance team and CNC Automation Operators cooperate as a team to guarantee the utmost dependability and operability of automation systems. Essential Functions • Responsible for delivering performance and operational uptime of our automated systems including but not limited to automated metal fabrication equipment, automated painting equipment and other technologies as assigned., • Support the development of maintenance plans for key automated manufacturing/fabrication equipment, • Provide triage support during outages of our automated systems, • Participates in workshops, Kaizen events and other related activities as needed, • Perform preventive and corrective maintenance on automated manufacturing/fabrication equipment, • Diagnose and resolve mechanical, electrical, and control system issues to minimize downtime., • Configure, calibrate, and optimize robotic welding cells and automation components., • Collaborate with engineering and production teams to implement process improvements and equipment upgrades., • Maintain accurate documentation of maintenance activities, equipment performance, and repair histories (Upkeep software)., • Ensure compliance with safety standards and company policies during all maintenance and repair activities., • Provide technical support and training to operators and junior technicians as needed., • Partners internal and external teams to support manufacturing related initiatives, • Identifies barriers to success and solicits help from leadership as and when needed., • Robot calibration and servicing: Maintaining accuracy in automated weld paths, • Sensor and camera systems: Understanding seam tracking and adaptive welding technologies, • Welding power source maintenance: Checking leads, gas flow, and consumables, • Exposure to PLC and other industrial controls/automation technologies such as RSLogix5000, CAN-BUS systems etc., • Preventive maintenance routines: Lubrication, filter changes, and wear part inspections, • Troubleshooting and diagnostics: Identifying and resolving mechanical or software issues, • Electrical and hydraulic, pneumatic systems: Basic understanding of wiring, sensors, and fluid systems, • Safety compliance: Adhering to lockout/tagout procedures and machine safety protocols, • Robot calibration and servicing: Maintaining accuracy in automated weld paths, • Sensor and camera systems: Understanding seam tracking and adaptive welding technologies, • Welding power source maintenance: Checking leads, gas flow, and consumables, • Team Collaboration: Work closely with the production team to support smooth operations and continuous improvement initiatives., • Work Environment Upkeep: Maintain a clean, organized, and hazard-free work area. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies • Data gathering and analysis, • Planning and organizing., • Decision Making. Work Location This position will work out of our Imeson Facility in Jacksonville, FL. This position is not approved for telecommuting or working remotely. Work Environment Most work is performed in a production fabrication shop environment with exposure to loud machinery, welding equipment, grinders, and cutting tools. Presence of metal dust, fumes, and sharp materials; proper ventilation and PPE (personal protective equipment) are mandatory. Standing, bending, lifting, and moving heavy materials for extended periods. Temperature fluctuations depend on season and equipment usage; some areas may be hot due to operational needs. Physical Demands While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and the ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position. This position may require occasional weekend work. Tuesday - Friday 6pm - 4:30am Travel Some occasional local day travel may also be necessary. Occasional travel to customer job sites and conferences may be required. Required Education and Experience • 10+ years of hands-on CNC operation and maintenance experience., • High school diploma or GED required, technical certification or associate degree in manufacturing technology or related field preferred., • Proficient in reading and interpreting electrical schematics, mechanical drawings, and technical manuals., • Proficient with Microsoft Office Word, Excel and Outlook, • Familiarity with welding processes and automated material handling systems., • Ability to work independently and in a team environment under minimal supervision., • Excellent problem-solving skills and attention to detail., • Familiar with metal processing equipment such as automated conveyors, paint systems, saws, and CNC equipment, • Familiarity with Voortman VACAM software and CNC programming Preferred. Preferred Education and Experience • Voortman Academy training or certification is a strong asset., • Knowledge of ISO, GMP, or other regulatory compliance standards., • Minimum 2+ years of experience operating Voortman metalworking machinery (e.g., V630, V310, V807, V304) Preferred., • Voortman Operator Training (includes VACAM, machine setup, and safety), • Welding certifications (e.g., AWS, EN ISO 9606), • CNC Machining or automation technician diplomas, • Safety training (e.g., OSHA, confined space, electrical safety), • Weld Control 300 training. Work Authorization Must be authorized to work in the USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job DescriptionSalary: $23-$26./hr About Us: RUSH Marine, LLC., a division of RUSH Construction Inc. is a leading marine construction contractor specializing in building, repairing, and maintaining docks, seawalls, pilings, boat lifts, bulkheads, and other waterfront structures. We pride ourselves on quality craftsmanship, attention to detail, and a strong commitment to safety. Position Summary: We are seeking an experienced and hardworking Marine Construction Carpenter to join our dynamic team in Jacksonville. The ideal candidate will have strong carpentry skills, a solid understanding of marine construction techniques, and the ability to work outdoors in physically demanding environments. This role involves building and repairing structures in and around water, often from barges or piers. Key Responsibilities: • Construct, install, and repair docks, seawalls, boardwalks, bulkheads, and marine framing systems., • Read and interpret blueprints, sketches, and project plans., • Operate power tools and heavy equipment (e.g., pile drivers, augers, lifts, saws)., • Measure, cut, and shape wood and other materials accurately., • Work with treated lumber, composite decking, concrete forms, and marine hardware., • Perform work from barges, boats, scaffolding, or directly in the water as needed., • Ensure all work is completed according to safety regulations and company standards., • Assist with general labor tasks as needed on the job site. Requirements: • Proven experience in carpentry, preferably in marine or heavy civil construction., • Ability to swim and work comfortably around water., • Proficiency with hand and power tools., • Familiarity with marine construction materials and fasteners., • Physical stamina and strength to lift heavy materials and work in all weather conditions., • Team player with a strong work ethic and attention to detail., • Valid drivers license and reliable transportation., • OSHA 10 or 30 certification a plus., • Must be able to obtain TWIC badge and Port badges to access Port Facilities Preferred Qualifications: • Experience working from barges or in/around tide-affected environments., • Knowledge of pile driving, jetting, or underwater structural supports., • Ability to operate small boats or barges. Benefits: • Competitive pay and opportunities for overtime, • Health, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays

Job Description 2nd Class IMP Fitter Position Type: Full-time, Non-Exempt, Hourly Reports to: IMP Superintendent/IMP Foreman Supervisory Responsibility: None Location: Jacksonville, FL Company Summary Stellar Energy provides state-of-the-art solutions customers build in for optimized energy performance now; and in the preparation for the energy needs of tomorrow. In business for 25 years, we’ve delivered added energy efficiency and capacity to customers in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Hyperscale deployment at the best possible speed to first megawatt. All delivered with the lower emissions required to support our partners’ unique sustainability objectives. Stellar Energy specializes in a wide range of engineering and manufacturing solutions within the energy sector including turbine inlet air chilling, central utility plants, district cooling, combined heat & power systems, thermal energy storage, inlet air heating, data center chilling, and inlet air chilling for LNG facilities. Additionally, our expertise extends to start-up & commissioning, system health analysis, services, and training. Our in-house team of skilled engineers and dedicated tradespeople are the reason we are the global leader in customized solutions. Stellar Energy strives to add value to today’s energy infrastructure, achieving secure, affordable, and sustainable energy that will help to create a responsible energy economy. Summary Objective To have experienced working knowledge of the Insulated Metal Panel installation, Assembly and the various terminologies, blueprint reading, measurements, take outs, job specifications, etc., to build an integrally complete erection system. Essential Functions • Fluent in understanding job specification, blueprint reading, target point measurements, true /plumb /square checking, and any necessary torque requirements, for large industrial structural steel systems., • The ability to cut, prep, fit and tack small to large; IMP’s, Flashing, etc., from various material types through true-plumb-square; into weld ready status, using isometric and structural drawings, while adhering to specific fit tolerance requirements., • The ability to properly select, measure, hand dress, and cut with grinder, power saws, hand tools, etc., as necessary to prepare IMP process to be completed per job specific requirements., • Strong structural aptitude and problem solver who can understand and follow instruction., • Accountability for completion of daily work assignments while monitoring quality, safety, and health regulations., • Operate overhead cranes and or forklifts, while adhering to industry standard practices of safe rigging systems and techniques., • Safely and efficiently direct and monitor two or more helpers., • Documentation of all quality reporting methods employed per SEA Quality Standards., • Complies with all company policies, procedures, and safety requirements and is physically / medically qualified to wear required PPE per OSHA standards., • Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review., • Prepares for ISO 9001 and other audits. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies • Collaboration Skills, • Reliable Attendance, • Decision Making, • Leadership, • Communication Proficiency; Written and Verbal, • Ethical Conduct, • Problem Solving, • Organizational Skills, • Thoroughness, • Time Management Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or listen. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Expected Hours of Work This is a full-time position. The first shift days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Second shift days and hours of work are Monday through Thursday, 3:00 p.m. to 1:30 a.m. Occasional weekend work may be required as job duties demand. Travel Travel is primarily not required except for local travel during the business day. Required Education and Experience • Basic math and language skills are required., • Grinding, welding, brazing, rigging, and cutting sheet metal., • 1 Year related experience or training Preferred Education and Experience • 2 Years’ experience in Insulated Metal Panels (IMP)., • Some vocational technical training is desired. Work Authorization Must be authorized to work in the USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description Data Management Services, Inc. (dba: DMS International) is a professional services firm headquartered in Silver Spring, Maryland, with work locations throughout the continental United States. We prepare managers and executives to lead their workforce through customized learning solutions that drive the standards of an ever-changing world. We build creative, unique and engaging learning experiences for commercial, civilian and defense organizations. Our high-caliber talent, delivery methodology and innovative solutions contribute to preparing a workforce that is ready for the future. You can join us on this journey to bring efficiency and creativity to our customers. At DMS International (DMS), we are the catalyst for effective workforce transformation. To achieve this, we hire professionals who take pride in doing quality work and who are excited about contributing to the professional development of tomorrow's leaders. DMS seeks candidates that possess and display the attributes that reflect our Core Values of: • Quality in delivering solutions,, • Leadership,, • Innovation,, • Teamwork,, • Integrity in conduct,, • Responsiveness to our customer’s mission DMS International is an Equal Opportunity Employer. We make employment decisions without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, pregnancy, childbirth, lactation and related medical conditions, genetic factors, military/veteran status, or other characteristics protected by law. We encourage individuals from all backgrounds to apply. Job Description DMS is seeking Armorer / Site Lead (OBMLS Specialist III/Site Lead) who will supervise and perform armory personnel who provide support for classroom and field laboratory instruction for U.S. Navy high-risk training evolutions. The Armorer/Site Lead performs supervision and training support duties associated with the delivery of small arms and crew served weapons training. The Armorer/Site Lead supervises and trains Armorers, Armorer/EMTs, and AA&E Range Technicians. The Armorer/Site Lead has a thorough understanding of maintenance and logistical tasks performed by subordinates and of Arms, Ammunition, and Explosives (AA&E) safety, security, and accountability regulations and programs. They assign and monitor small arms, weapons, weapon mounts, Visual Augmentation Systems (VAS), training facilities, Training Unique Equipment (TUE) and Small Arms Weapons Simulators (SAWS) maintenance and review records to analyze maintenance trends. The Armorer/Site Lead regularly reports the material condition and accountability status of AA&E, VAS, SAWS, and other controlled inventory items to Activity Leadership and advises Activity Leadership to resolve identified discrepancies. The Armorer/Site Lead accounts for ammunition and explosives (AE) in the official record including the requisition, issue, receipt, expenditure, and disposition of assets via computer-based applications. They provide oversight of an AE qualifications and certification (QUAL/CERT) program and serve as an AE QUAL/CERT board member or advisor. The Armorer/Site Lead generates technical correspondence including, but not limited to, AE Standard Operating Procedures (SOPs), Conventional Ordnance Deficiency Reports (CODRs), Product Quality Deficiency Reports (PQDRs), Explosive Event Reports (EERs), Explosive Mishaps Reports (EMRs), Supply Discrepancy Reports (SDRs) and Technical Manual Deficiency/Evaluation Reports (TMDERs), and can coordinate service contracts pertaining to facilities and equipment to which they are assigned. The duties and attributes include: • Possess a total of nine (9) years or more of related experience., • A minimum of six (6) years of preventative/corrective weapons maintenance experience (including military crew served weapons, where applicable), and a minimum of three (3) years’ experience within an ammunition and weapons management environment., • Knowledge on Navy Antiterrorism/Navy Security Force (AT/NSF) and Expeditionary Warfare related programs and courses of instruction, • Comprehensive knowledge of applicable Department of Defense (DOD) and Navy directives/programs relating to AT/NSF, small arms training, and technical training equipment, • In-depth knowledge of Allowable Equipment Lists (AEL) and formal course Resource Requirements List (RRL) that support AT/NSF initial and sustainment training, • Basic knowledge of marksmanship principles/concepts as applied to small arms, operation and maintenance of small arms, and small arms handling and employment techniques., • In-depth knowledge of the Department of the Navy’s AT/NSF mission, program objectives and relevant regulatory requirements, and Fleet/Training Command training organizations, especially those involved in AT/NSF., • Comprehensive knowledge of wide variety of evaluation methods and principles sufficient to assess the effectiveness and efficiency of training methodology/technology support for specialty areas or complex subject areas, • Knowledge of training systems acquisition process and innovation contracting practices to include experience in preparing statements of work and request for proposals., • Possess strong communication skills (both orally and written) with the ability to communicate abstract ideas in concrete terms for the adult user, • Demonstrate excellent presentation skills, • Display technical writing experience (for military manuals), • Possess excellent interpersonal communication skills, • Portray a commitment to customer service, • Exhibit the ability to manage and meet deadlines, • Possess the ability to identify and solve problems, • Demonstrate a high degree of computer literacy, and familiarity with Microsoft Office®, • Be willing to travel on a frequent basis, sometimes unscheduled, throughout the CENSECFOR domain., • Possess a valid driver’s license., • Demonstrate the ability to supervise and perform maintenance of all weapons and associated equipment, as required, for the respective learning site, including:, • MK-19 MOD 3 40mm grenade launcher, • M203 40mm grenade launcher, • M2HB .50-caliber heavy machinegun, • M240B 7.62mm medium machinegun, • MK48 MOD 1 7.62mm lightweight machinegun, • M4A1 5.56mm rifle, • M500A1 12-gauge shotgun, • M2A1 .50 Caliber machine gun, • M18 9mm service pistol, • M9 9mm service pistol, • Maintenance Management of Training Unique Equipment (TUE) including (but not limited to):, • Force Protection Ship Simulators/Tactical Training Simulators (FPSS/TTS), • Mobile Weapons Firing Trailers (MWFT), • Small Arms Weapons Simulators (SAWS), • Modular Indoor Firing Ranges (MIFR), • Maintenance and management of support equipment, facilities and material including but not limited to:, • AA&E Storage Facilities, • Civil Engineering Support Equipment (CESE), • Government Owned/Leased Non-tactical Vehicles, • Material Handling Equipment (MHE), • Visual Augmentation Systems (VAS), • Repair parts inventory, • Tools and Consumables Items, • Training Aids (Target stands, barricades, static vehicles, etc.), • Weapons Based Training Facilities, • Weapon Mounts, • Management of ammunition including but not limited to:, • Dispositioning, • Handling, • Material Potentially Presenting and Explosive Hazard (MPPEH) Processing, • Receipting, Storing, Segregating, Issuing (RSSI), • Reporting via Ordnance Information System-Retail (OIS-R) and or Total Ammunition Management Information System (TAMIS), • Development of documentation in support of ordnance-based maintenance processes including, but not limit to:, • AA&E Standard Operating Procedures (SOP), • Conventional Ordnance Deficiency Reports (CODR), • Explosive Event Reports (EER), • Explosive Mishap Reports (EMR), • Product Quality Deficiency Reports (PQDR), • Supply Discrepancy Reports (SDR), • Technical Manual Deficiency/Evaluation Report (TMDER), • Transportation of weapons and ammunition from storage facilities to live ranges, • Storage and accountability for weapons and ammunition per Navy directives, • Attending training courses to obtain requisite certifications, as may be appropriate for the respective learning site, • Possessing a familiarity of the duties and responsibilities associated with the Arms, Ammunition, and Explosives (AA&E) Program as detailed in OPNAVINST 5530.13C, • Possess the motivation and ability to research directives, regulations, and policies to determine solutions to problems, issues, and concerns, • Display strong oral and written communication skills, as well as excellent presentation skills, • Possess experience in technical writing (military manuals), • Demonstrate excellent interpersonal skills, with a commitment to customer service, • Must be proactive in identifying and solving problems, • Display the ability to manage and meet deadlines, • Possess familiarity with computers and a working knowledge of software packages such as Microsoft Office®, • Demonstrate the ability to understand, implement, and maintain standards, • Understanding that work is normally performed in an Ammunitions and Explosives (AE) storage facility setting, and on live-fire range facilities, and in some cases, underway on small water craft including Riverine boats. Work may be performed indoors or outdoors, during inclement weather conditions, and in high humidity with extreme heat or cold, depending upon location., • Acknowledgement that the number of scheduled courses and/or the tempo of training may create a highly stressful work environment, • Capable of qualifying as an AE worker, using mature and stable judgment on duty as well as off-duty. AE screening and qualifications are reviewed annually, and failure to maintain AE qualification may result in termination., • Perform duties related to enhanced organizational level maintenance (EOLM) on weapons and other training equipment,, • Manage small arms, ammunition, repair parts, tools, and ancillary equipment,, • Transport small arms and ammunition to and from training locations., • Manage AE personnel assigned to the Learning Site The CENSECFOR Armorer/Site Lead must: • Must be a US Citizen., • Satisfy the requirements of the Lautenberg Amendment to the Gun Control Act of 1968, • Have completed a U.S. military armorer’s courses, preferred are the following U.S. Navy certification courses:, • CENSECFOR EOLM Armorers’ course,, • NSW EOLM Armorers’ course,, • NECC EOLM Armorers’ course, • Possess (preferred) the following U.S. Navy course completions and/or certifications:, • AMMO 49, • AMMO 51, • AMMO Technical Specialist, • AMMO Administration, • Fleet Sentencing, • Training Ammunition Management Information System (TAMIS), • Material Potentially Presenting an Explosive Hazard (MPPEH), • Demonstrate a familiarity with the Fire Arms Training Systems® (FATS®) simulator is preferred, • Obtain a suitable evaluation for mandatory medical, psychological, and drug screenings., • Possess in-depth knowledge night vision, lasers, weapons, and weapon sight technologies, capabilities, and weaknesses., • Possess a minimum of three (3) years’ experience of preventative/ corrective small arms weapons maintenance with at least two (2) years’ experience in an ammunition/weapons management environment, • Demonstrate the ability to troubleshoot complex malfunctions., • Demonstrate skill in the use of hand tools, test equipment, and precision measuring equipment., • Demonstrate the ability to interpret technical manuals, illustrations, specifications, and diagrams., • Demonstrate a basic knowledge of computer operations is required for inventory control and weapon maintenance record keeping., • Possess an active state driver’s license., • Possess (or be able to obtain) a Class B or Class C Commercial Driver’s License (CDL) as required with a HAZMAT endorsement in order to transport ammunition. Job Locations: • Jacksonville, Florida, United States Position Type: • Full-Time/Regular

Job Description About the Role: The Gated Entry Installation & Service Technician plays a critical role in ensuring the security and smooth operation of gated communities, commercial properties, and private facilities by installing, maintaining, and repairing automated gate systems. This position requires a thorough understanding of electrical and mechanical components to troubleshoot and resolve issues efficiently, minimizing downtime and enhancing safety. The use of heavy equipment, including but not limited to, horizontal boring machines, concrete saws, trenching machines, concrete mixers, jack hammers, etc will be required. This role requires, included but not limited to, heavy lifting, shovel digging, concrete mixing, concrete cutting, pole/post setting, etc. Our organization is very proficient in retrofitting systems/integrations and most installations/service takes place while the business/community is operational thus a heavy emphasis on cleanliness and customer service is essential (some pre-construction jobs do occur). Most installations will require a large diversity of working environments and skills including, but not limited to, conduit running, concrete work (cutting, patching, slabs, pedestal/pole setting, etc), attic work, aerial runs, trenching (machine and hand digging), extension ladder/lift work, relay/timer/trigger programming, cloud portal management and programming, computer networking, etc. A keen construction understanding of building infrastructure is essential to understand where/how we can run wires, conduits, underground work, etc. Experience with and a strong understanding of heavy equipment, hand tools, ladders, etc. is required. Certain industry certification and product certifications are required or will be required to be obtained. The technician will collaborate closely with property managers and security personnel to customize gate operations according to specific site requirements. Additionally, the role involves conducting routine inspections and preventive maintenance to extend the lifespan of gate systems and prevent unexpected failures. Ultimately, the Gated Entry Technician ensures that all access control systems function reliably, providing peace of mind to residents, employees, and visitors alike. Minimum Qualifications: • High school diploma or equivalent., • Proven experience in electrical or mechanical repair, preferably with automated gate or access control systems., • Basic knowledge of electrical wiring, circuitry, and safety standards., • Expertise with above mentioned heavy equipment operations., • Ability to read and interpret technical manuals, schematics, and blueprints., • Certification in gated entry systems, access control systems or related field., • Experience with various gate operator brands and access control software., • Familiarity with networking and integration of gate systems with security cameras and intercoms., • Strong troubleshooting skills with a focus on customer service., • Install, configure, and test automated gate systems including motors, sensors, and control panels according to manufacturer specifications and site requirements., • Perform routine maintenance and inspections to identify and address potential mechanical or electrical issues before they impact gate operation., • Diagnose and repair faults in gate operators, access control devices, and related electrical components promptly to minimize service interruptions., • Collaborate with property management and security teams to customize gate access settings and ensure compliance with safety and security protocols., • Maintain accurate service records, document repairs and installations, and communicate effectively with clients regarding system status and recommendations. Skills: The Gated Entry Technician utilizes electrical and mechanical skills daily to install and maintain complex gate systems, ensuring they operate safely and efficiently. Troubleshooting expertise is essential for diagnosing issues quickly and implementing effective repairs, minimizing downtime for clients. Communication skills are important for coordinating with property managers and explaining technical information clearly to non-technical stakeholders. Time management and organizational skills help the technician prioritize service calls and maintain detailed records of work performed. Additionally, adaptability and continuous learning are vital as technology evolves, requiring the technician to stay current with new gate system models and access control innovations. Work Schedule: Monday-Friday with occasional weekends. Afterhours on call rotation and emergency dispatch needs. Hours vary based on client/company needs but generally have an 8AM start time to 5-6PM stopping time. Travel Requirements: Weekly travel throughout FL, GA or SC is common. All drive/travel time is performed in company issued vehicles, compensated at full pay rate, covered with company expense accounts and per diem issued. Other Requirements: The individual will be required to furnish their own hand tools, such as, but not limited to, screw drivers, scissors, wrenches, wire strippers/cutters, crimpers, sockets/ratchets, all formed of pliers/cutters, voltage meter, and any other hand tool needed to accomplish an install or service call. The individual must have no felony or criminal record, pass drug screening and have a valid driver’s license with a clean driving record. Compensation: The role has a window or compensation that will range based on experience. skill set and certifications held. Rates are negotiable and based on those stated factors but generally range from $20.00/hr - $35.00/hr. These rates do not include per diem while traveling, commissions, etc. Rates/Offers will be discussed and agreed to at time of hire. We offer a full suite of benefits including, but not limited to, medical, dental, vision, life, 401k, etc.

Job DescriptionFine Craftsmanship Starts with You. Are you a skilled Finish Carpenter who takes pride in precision, craftsmanship, and the fine details that make a home stand out? Do you specialize in trim work, cabinetry and custom wood finishes? Our Core ValuesDelivering on Our Commitments, Respecting the Connections, Taking Pride in Our Work, and Practicing Continuous Improvementdefine how we operate. If youre a dedicated craftsman who values quality over shortcuts, we want you on our team. What Were Looking For in a Finish Carpenter: • Skilled in Precision Carpentry & Custom Woodworking Experience in crown molding, wainscoting, cabinetry, built-ins, coffered ceilings, and fine wood finishing., • Proficiency in Residential & Light Commercial Finish Work Including door and window trim, baseboards, stair railings, mantels, shelving, and furniture installation., • Mastery of Carpentry Tools Ability to work with miter saws, routers, chisels, planers, finish nailers, clamps, and precision measuring tools., • Expert in Wood Joinery & Finishing Techniques Including dovetailing, pocket joinery, wood veneer application, staining, and seamless caulking., • Attention to Detail & High Standards Ability to deliver flawless, clean, and elegant finishes with minimal supervision., • Understanding of Wood Species & Finishing Materials Experience working with hardwoods, softwoods, MDF, and specialty woods for the right look and durability., • Reliable & Professional Show up on time, clean up after yourself, and treat customers homes with care and respect., • Your Own Work Vehicle A truck or van suitable for transporting materials and tools. Handyman Connection is an equal-opportunity employer committed to building a team of skilled professionals who take pride in their work and want to grow in their craft.

Job Description Venture Dynamics is seeking skilled and experienced Marine Pipefitters to install, modify, fabricate, and repair piping systems aboard Navy and commercial vessels. Marine Pipefitters will read and interpret drawings, route and fit pipe runs, prep joints for welding or brazing, perform system alignments, and support testing requirements. This position requires advanced shipyard pipefitting experience, strong technical accuracy, and the ability to work safely in confined spaces, elevated areas, and industrial shipboard environments. Per diem may be available on select projects depending on contract requirements and travel distance. Responsibilities • Read and interpret blueprints, isometrics, P&IDs, and NAVSEA piping specifications, • Fit, fabricate, route, and install piping systems including copper-nickel, stainless steel, carbon steel, and PVC, • Perform silver brazing on copper-nickel and other approved piping materials, • Prep pipe joints for welding or brazing, including beveling, cleaning, fit-up, and alignment to tolerance, • Install valves, flanges, hangers, supports, unions, reducers, and associated hardware, • Conduct hydrostatic and pneumatic testing including flushing and leak checks, • Remove, repair, and replace shipboard piping systems and components, • Use pipefitting tools including bevelers, threaders, grinders, saws, levels, and precision measuring devices, • Work safely in tanks, voids, bilges, machinery spaces, and other confined or restricted shipboard areas, • Minimum 5 years of pipefitting experience in Navy or commercial ship repair environments, • Proven ability to perform silver brazing to shipyard and customer standards, • Ability to read and apply shipyard drawings, P&IDs, schematics, and piping layouts, • Proficiency in pipe layout, fabrication, fit-up, and measurement tolerances, • Experience preparing joints for welders and coordinating with welding teams, • Ability to safely use hand tools, power tools, cutting tools, and pipe beveling equipment, • Must pass background screening and meet shipyard access requirements (DBIDS when required), • Ability to work aloft, in confined spaces, and in physically demanding marine environments, • Prior silver brazing certification (MIL-SPEC, AWS, or ABS accepted by customers), • Experience working under NAVSEA Standard Items and Navy piping-system requirements, • OSHA-10 Maritime, • Ability to wear a respirator when required for hot-work, confined-space support, blasting, paint, or insulation areas, • Work occurs aboard ships, in dry docks, and in pipe fabrication or industrial environments

Title Shipfitter About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Job title: Structural Shipfitter Reports to: Structural Superintendent Responsible for the use of various tools and equipment in the fabrication, assembly, and erection of steel structure. This position includes drawing reading, steel structure removal shipboard and reinstall. The position requires a working knowledge of technical to include 1689 and 1688. ESSENTIAL DUTIES & RESPONSIBILITIES Responsibilities also include but are not limited to: • Ensure work is done safely and meets quality standards., • Must have own basic skill related tools and equipment if not supplied by the workplace., • Lay-out, fabricate and brace metal structural parts, such as plates, bulkheads, and frames., • Lay out position of parts on metal, working from blueprints or templates and using scribe and hand tools., • Locate and mark reference lines, such as center, buttock, and frame lines., • Position parts in hull of ship., • Align parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls., • Mark location of holes to be drilled and install temporary fasteners to hold part(s) in place for welding., • Install packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips., • May prepare molds and templates for fabrication of nonstandard parts., • May tack weld clips and brackets in place prior to permanent welding., • May roll, bend, flange, cut, and shape plates, beams, and other heavy metal parts, using shop machinery, such as plate rolls, presses, bending brakes, and joggle machines., • Ensure work is done safely and meets quality standards., • Assemble items as instructed by floor supervisor., • Keep work areas clean and organized and take proper care of all equipment and facilities., • Follow all company rules and policies., • Provide a great level of attention to detail and focus on the given task., • Work with team members to maximize productivity and efficiency., • Prepare product for shipment., • Report any unsafe work conditions or practice to supervisor., • Ability to read and interpret documents furnished in written, oral, diagram or schedule form such as safety rules, operating and maintenance instructions, quality manuals and procedure manuals., • Familiarity with the metric system, • Ability to perform simple shop math, convert decimals to factional equivalents and fractions to decimal equivalents., • Ability to stand continuously for long periods of time., • Ability to identify and measure material., • Ability to follow instructions given both verbally and in written form., • Willingness to learn and work to the best of his/her abilities as well as dependable work ethic., • Knowledge of machines and tools, including their designs and uses., • High school graduate, or GED preferred., • Six months to one-year related experience and/or training, • Most work performed will be onboard a ship, in a dry dock or shipyard under fast- paced conditions; frequently requiring overtime., • Consistent exposure to extreme temperatures, outdoor elements, high noise levels, toxic or caustic chemicals and dusty conditions., • Work over extended periods of time in tightly configured confined spaces., • May be made to enable qualified individuals with disabilities to perform essential job functions. Location Florida Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications. Apply Now

Title Shipfitter About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Job title: Structural Shipfitter Reports to: Structural Superintendent Responsible for the use of various tools and equipment in the fabrication, assembly, and erection of steel structure. This position includes drawing reading, steel structure removal shipboard and reinstall. The position requires a working knowledge of technical to include 1689 and 1688. ESSENTIAL DUTIES & RESPONSIBILITIES Responsibilities also include but are not limited to: • Ensure work is done safely and meets quality standards., • Must have own basic skill related tools and equipment if not supplied by the workplace., • Lay-out, fabricate and brace metal structural parts, such as plates, bulkheads, and frames., • Lay out position of parts on metal, working from blueprints or templates and using scribe and hand tools., • Locate and mark reference lines, such as center, buttock, and frame lines., • Position parts in hull of ship., • Align parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls., • Mark location of holes to be drilled and install temporary fasteners to hold part(s) in place for welding., • Install packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips., • May prepare molds and templates for fabrication of nonstandard parts., • May tack weld clips and brackets in place prior to permanent welding., • May roll, bend, flange, cut, and shape plates, beams, and other heavy metal parts, using shop machinery, such as plate rolls, presses, bending brakes, and joggle machines., • Ensure work is done safely and meets quality standards., • Assemble items as instructed by floor supervisor., • Keep work areas clean and organized and take proper care of all equipment and facilities., • Follow all company rules and policies., • Provide a great level of attention to detail and focus on the given task., • Work with team members to maximize productivity and efficiency., • Prepare product for shipment., • Report any unsafe work conditions or practice to supervisor., • Ability to read and interpret documents furnished in written, oral, diagram or schedule form such as safety rules, operating and maintenance instructions, quality manuals and procedure manuals., • Familiarity with the metric system, • Ability to perform simple shop math, convert decimals to factional equivalents and fractions to decimal equivalents., • Ability to stand continuously for long periods of time., • Ability to identify and measure material., • Ability to follow instructions given both verbally and in written form., • Willingness to learn and work to the best of his/her abilities as well as dependable work ethic., • Knowledge of machines and tools, including their designs and uses., • High school graduate, or GED preferred., • Six months to one-year related experience and/or training, • Most work performed will be onboard a ship, in a dry dock or shipyard under fast- paced conditions; frequently requiring overtime., • Consistent exposure to extreme temperatures, outdoor elements, high noise levels, toxic or caustic chemicals and dusty conditions., • Work over extended periods of time in tightly configured confined spaces., • May be made to enable qualified individuals with disabilities to perform essential job functions. Location Florida Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications. Apply Now

Title Shipfitter About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Job title: Structural Shipfitter Reports to: Structural Superintendent Responsible for the use of various tools and equipment in the fabrication, assembly, and erection of steel structure. This position includes drawing reading, steel structure removal shipboard and reinstall. The position requires a working knowledge of technical to include 1689 and 1688. ESSENTIAL DUTIES & RESPONSIBILITIES Responsibilities also include but are not limited to: • Ensure work is done safely and meets quality standards., • Must have own basic skill related tools and equipment if not supplied by the workplace., • Lay-out, fabricate and brace metal structural parts, such as plates, bulkheads, and frames., • Lay out position of parts on metal, working from blueprints or templates and using scribe and hand tools., • Locate and mark reference lines, such as center, buttock, and frame lines., • Position parts in hull of ship., • Align parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls., • Mark location of holes to be drilled and install temporary fasteners to hold part(s) in place for welding., • Install packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips., • May prepare molds and templates for fabrication of nonstandard parts., • May tack weld clips and brackets in place prior to permanent welding., • May roll, bend, flange, cut, and shape plates, beams, and other heavy metal parts, using shop machinery, such as plate rolls, presses, bending brakes, and joggle machines., • Ensure work is done safely and meets quality standards., • Assemble items as instructed by floor supervisor., • Keep work areas clean and organized and take proper care of all equipment and facilities., • Follow all company rules and policies., • Provide a great level of attention to detail and focus on the given task., • Work with team members to maximize productivity and efficiency., • Prepare product for shipment., • Report any unsafe work conditions or practice to supervisor., • Ability to read and interpret documents furnished in written, oral, diagram or schedule form such as safety rules, operating and maintenance instructions, quality manuals and procedure manuals., • Familiarity with the metric system, • Ability to perform simple shop math, convert decimals to factional equivalents and fractions to decimal equivalents., • Ability to stand continuously for long periods of time., • Ability to identify and measure material., • Ability to follow instructions given both verbally and in written form., • Willingness to learn and work to the best of his/her abilities as well as dependable work ethic., • Knowledge of machines and tools, including their designs and uses., • High school graduate, or GED preferred., • Six months to one-year related experience and/or training, • Most work performed will be onboard a ship, in a dry dock or shipyard under fast- paced conditions; frequently requiring overtime., • Consistent exposure to extreme temperatures, outdoor elements, high noise levels, toxic or caustic chemicals and dusty conditions., • Work over extended periods of time in tightly configured confined spaces., • May be made to enable qualified individuals with disabilities to perform essential job functions. Location Florida Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications. Apply Now

Job Description Maintenance Technician – The Grove at Deerwood | Jacksonville, FL Who We Are: Founded in 1975, CONAM Management operates in 10 states, across 26 key metropolitan markets, supporting over 60,000 apartment units of both affordable and conventional housing. Our growing team of over 1,700 associates is dedicated to maintaining and enhancing the quality of life for our residents. At CONAM, we foster a collaborative, team-oriented culture where our associates thrive and are valued for their expertise and commitment. What We Are Looking For: We are seeking a skilled Maintenance Technician to join our team at The Grove at Deerwood in Jacksonville, FL. As part of our maintenance team, you'll play a crucial role in ensuring the operational excellence and curb appeal of the apartment community, delivering superior service to our residents, and supporting the maintenance team in all aspects of Property Management Maintenance to include upkeep, repairs, and turnovers. This is a full-time position with full benefits. Pay range: $23.00 - $25.00 per hour Key Responsibilities: • Perform routine preventative maintenance on equipment and systems, including HVAC, plumbing, electrical, and appliances, to ensure optimal performance and reduce downtime., • Address resident service requests related to apartment maintenance, including plumbing, electrical, HVAC, and appliance issues, ensuring all issues are resolved quickly and professionally., • Oversee turnovers, conducting inspections, repairs, and cleaning to prepare units for new residents, ensuring each apartment is move-in ready., • Maintain the community’s curb appeal, including landscaping and exterior maintenance, to ensure the community reflects high standards of cleanliness and attractiveness., • Support a team-oriented culture by collaborating with other technicians, contractors, and property management team members in the upkeep of the multi-family complex., • Participate in an on-call rotation to provide after-hours emergency maintenance services as needed., • Ensure compliance with safety regulations and operational standards in all maintenance activities., • Additional duties as required. Who You Are: (Requirements of the Position) • Experience: Minimum of 1-2 years of hands-on experience in apartment maintenance or equivalent, including proficiency in plumbing, electrical systems, HVAC, appliance repair, and general carpentry., • Technical Skills: Ability to operate and maintain various hand tools and power equipment, such as drills, saws, grinders, electrical testers, HVAC systems, and plumbing tools., • Problem-Solving Skills: Strong troubleshooting abilities to quickly assess and resolve maintenance issues, ensuring minimal disruption to residents., • Communication: Excellent verbal and written communication skills to interact with residents, team members, and vendors effectively., • Customer Focus: A passion for delivering exceptional service to residents and creating a positive living experience., • Flexibility: Willingness to work a flexible schedule and participate in an on-call rotation to handle apartment maintenance emergencies. Our benefits include: • Medical, dental, vision insurance, • Pet insurance, • Life insurance and identity theft protection, • Paid sick and vacation time, • 401(k) plan with company match, • Flexible Spending Accounts (FSAs), • Employee Assistance Program (EAP) Additional Information: • This position is contingent upon passing a background check, employment verification, pre-employment physical, and drug screening., • CONAM will consider qualified applicants with criminal histories in a manner consistent with the requirement of the law. Pay Bands: Pay bands are established based on geographic location, internal equity, market conditions, and candidate qualifications. We provide competitive compensation based on experience and qualifications.

In this role, you will assist Fitters and Welders in fitting and welding tasks such as positioning and aligning structural metal components in the fabrication of steel structures.Operate punches, grinders, drills, saws, oxy-fuel torches, and other basic equipment and hand tools.Clean work area and r

In this role, you will assist Fitters and Welders in fitting and welding tasks such as positioning and aligning structural metal components in the fabrication of steel structures.Operate punches, grinders, drills, saws, oxy-fuel torches, and other basic equipment and hand tools.Clean work area and r

Responsibilities: Cuts, trims and prepares raw meat for sale using saws, knives, grinder, and tenderizer.

Job Description Job Title: Welder Assembler Shift: 8am-5pm Mon-Fri Pay: $17-$18.00/hr depending on experience Job Description We are seeking a skilled Welder Assembler to join our team in constructing safe rooms. This role involves a combination of MIG welding and various assembly tasks, including building wall panels, installing flooring, ceilings, doors and painting. You'll utilize hand and power tools to measure and cut materials accurately. The position requires teamwork, as you will work in groups of 4-6, following drawings which you will be taught to read. Responsibilities • Perform MIG welding with a potential for TIG welding., • Construct safe rooms by building wall panels and installing drywall., • Utilize hand and power tools to measure and cut materials., • Work collaboratively in teams of 4-6 to complete construction tasks., • Follow construction drawings and learn to read them effectively., • Proficient in MIG welding and able to pass a weld test., • Experience in construction, assembly, fabrication, or a shop setting., • Proficiency with hand and power tools., • Ability to read a tape measure down to the 16th inch., • Experience with TIG welding is a plus. We offer full benefits with three plans to choose from, including the potential for 100% employer-paid coverage. Employees enjoy a 3% 401k match, two weeks of paid vacation, ten major holidays, and annual reviews for raises. There is an opportunity for career advancement through proficiency levels, and permanent employees can travel internationally. Work Environment You will work in a smaller open-air shop with a very diverse workforce. The role involves collaboration in teams, and there is an expectation to travel approximately three times a year, each trip lasting about two weeks Job Type & Location This is a Contract to Hire position based out of Jacksonville, FL. Pay and Benefits The pay range for this position is $17.00 - $18.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionBenefits/Perks • Flexible Scheduling, • Competitive Compensation You are hard-working, a team player, and dedicated to performing quality work in all that you do. Past experience as a landscaper is preferred and a positive attitude is a must! Responsibilities: • Use hand tools, such as shovels, rakes, pruning saws, saws, hedge or brush trimmers, or axes, • Operate vehicles or powered equipment, such as mowers, tractors, twin-axle vehicles, snow blowers, chain-saws, electric clippers, sod cutters, or pruning saws, • Water lawns, trees, or plants, using portable sprinkler systems, hoses, or watering cans, • Prune or trim trees, shrubs, or hedges, using shears, pruners, or chainsaws, • Gather and remove litter, • Interact with customers in a professional and friendly mannerQualifications:, • Past experience as a landscaper/groundskeeper preferred, • Experience with the use of hand-held and power tools, • Must be able to climb ladders and stairs, comfortably lift 40+ pounds repetitively, and work on your feet for long periods of time, • Willing to work in all weather elements

BrightView - - Responsibilities: Smoothing and finishing surfaces of poured concrete, such as walks, sidewalks, roads or curbs using a variety of hand and power tools; Aligning forms for sidewalks, curbs or gutter; patch voids; use saws to cut saw expansion joints; check the forms that holds the co

Capable and skilled with working with standard carpentry tools such as(nut not limited to); skill saws, chainsaws, jig saws, sledge hammers, nails, wire cutters, torches, metal saws, drills, and general hand tools. The carpenter position is a skilled craftsperson in regard to all types of general an

Job Description ABOUT THE ROLE The Crane Operator will be responsible for locating and moving production materials from production plant to yard storage. Will fulfill shipping requirements daily. Operator will ensure that all employees working around this equipment are not exposed to preventable accidents. This individual will conduct daily physical inspections of the equipment and its rigging. SAFETY IS OUR HIGHEST PRIORITY. Safety is our highest priority. We believe a safe workplace is built on mutual respect, care, and accountability. Every team member is empowered and expected to follow safety practices, look out for one another, and speak up about potential risks. Together, we create an environment where everyone goes home safely each day. WHY JOIN OUR TEAM? At Wells, you’re part of a team that takes pride in building something that lasts. Whether you’re in operations, a manufacturing facility, or out in the field, your work plays a direct role in creating quality structures that support our communities. We value hard work, reliability, and teamwork because getting the job done right requires teamwork. With a strong focus on safety, collaboration, and ingenuity, we create an environment where you can build your experience, contribute to meaningful work, and make an impact. WHAT WE OFFER Wells provides a competitive benefits package designed to support employees’ health, financial well-being, and work-life balance. Benefits include medical, dental, and vision insurance, company-paid disability and life insurance, wellness incentives, paid holidays, PTO, flexible spending accounts, HSA options, a 401(k) with profit sharing, access to Nice Healthcare, employee assistance resources, pet insurance, and additional voluntary coverage such as critical illness, accident, and hospital indemnity plans. • Health and family care leave is available to both union and non-union employees., • Operate crane and heavy equipment safely in accordance with company procedures, training, and safety standards, • Perform daily inspections of cranes and heavy equipment to ensure proper working condition and report defects immediately, • Apply proper rigging practices and verify load capacities prior to lifting or moving materials with cranes and equipment, • Safely climb on and off cranes, heavy equipment, and form surfaces to complete required tasks, • Use hand tools including cutoff saws, grinders, drills, and related equipment to support crane and production operations, • Operate gas/acetylene torch equipment as needed for fabrication, cutting, or repair work, • Operate forklifts and other material handling equipment to support yard and production needs A safety-focused crane operator with strong situational awareness, who takes pride in precise material handling and maintaining a controlled, hazard-free work environment. The ideal candidate is dependable, communicates clearly with team members, and works efficiently in a fast-paced production and yard setting while ensuring equipment and rigging are always properly inspected and secured. IDEAL CANDIDATE WILL HAVE • High School Diploma or GED required, • Ability to lead a team with respect, professionalism, and dignity, • Strong ability to work collaboratively to complete projects efficiently, • Self-motivated and driven to complete tasks with minimal supervision, • Strong interpersonal communication skills to effectively interact with co-workers, supervisors, and managers, • Authorized forklift operator or willingness and ability to learn forklift operation, • Experienced in operating overhead crane systems and crane-ways, • Ability to perform physically demanding work, including lifting up to 75 lbs occasionally and frequent bending, climbing, kneeling, twisting, squatting, crawling, and repetitive hand/arm use, • Capable of standing, walking, and moving throughout the facility for extended shifts of up to 12 hours, • Comfortable working at heights using ladders, scaffolding, swing stages, and man lifts frequently, • Ability to work safely in a production or field environment with moderate to high exposure to safety risks and hazards, • Willingness to work in varying environmental conditions, including wet, hot, humid, and cold weather, and outdoors (Depending on location) Wells is an Equal Opportunity Employer, including Veterans and Individuals with Disabilities. Wells participates in E-Verify and will provide the federal government with your I-9 Form information to confirm you are authorized to work in the U.S.

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary Signarama Jacksonville | Jacksonville, FL Relocation assistance available for the right candidate Build It. Lead It. Take Pride in It. Signarama Jacksonville is seeking a Production Manager with a strong fabrication background to lead our shop and bring complex signage projects to life. This role is ideal for someone who knows their way around a production floor, enjoys building things with their hands, and can lead a team without losing touch with the work itself. If you come from sign fabrication, custom manufacturing, or a hands-on shop environment and want a leadership role where your experience actually matters, this could be a great fit. What Youll Be Doing • Oversee daily fabrication and production operations in the shop, • Lead projects involving metal, wood, plastics, vinyl, and illuminated signage, • Work closely with sales and design to turn concepts into buildable, efficient solutions, • Plan workflow, assign jobs, and adjust priorities to keep production moving, • Mentor and support fabricators, installers, and production staff, • Stay involved on the floor troubleshooting builds, improving methods, and setting the standard, • Inspect finished work to ensure strength, accuracy, and visual quality, • Manage materials, tools, equipment, and shop organization, • Identify opportunities to improve fabrication processes, efficiency, and safety What Were Looking For • Strong background in sign fabrication or custom manufacturing, • Experience with materials such as aluminum, steel, ACM, plastics, wood, and vinyl, • Familiarity with fabrication tools and equipment (CNC, routers, welders, brake, saws, etc.), • Leadership or lead-person experience in a shop or production environment, • Ability to read drawings, specs, and design files and translate them into builds, • Practical problem-solver who can adapt when plans change, • Strong attention to detail and pride in craftsmanship, • Comfortable working in a fast-paced, hands-on environment (Experience with illuminated signs, channel letters, monument signs, or architectural signage is a big plus.) What We Offer • Competitive pay based on fabrication and leadership experience, • Relocation assistance for qualified candidates, • A hands-on, skilled shop environment, • Freedom to improve processes and influence how things are built, • Long-term opportunity with a respected, established brand About Signarama Jacksonville For over 20 years, Signarama Jacksonville has delivered custom signage solutions built to last. From fabrication to installation, we value craftsmanship, teamwork, and people who take pride in doing the job right. If youre a fabricator ready to step into a leadership role or a production leader who still loves the shop floor wed love to talk. Apply today and help us build signage that stands out for the right reasons.

Job Description  Plans, constructs, and repairs a wide range of custom wood containers built to military specifications in support of MCPP operations. Products include shipping crates, storage boxes, pallets, and other specialized wooden items as required.  Reviews work orders, drawings, and specifications to plan and lay out materials and tasks. Measures, selects, and prepares appropriate lumber, hardware, and tools needed for each project.  Follows detailed instructions provided by the shop carpenter to construct, modify, or repair wooden boxes, crates, and pallets in accordance with established designs and requirements.  Operates a variety of stationary and portable power tools, including pneumatic nail guns, impact wrenches, battery-operated drills, radial arm saws, and band saws, always ensuring safe and proper use.  Performs additional duties as assigned, supporting overall shop operations and Work Hours: Monday – Friday, 06:30 AM – 3:00 PM Company DescriptionPLEASE READ BEFORE APPLYING. Be advised that you are only required to apply for ONE position. Pick your best employment opportunity and only apply once. If you apply for more than one position, all applications will be deleted and you will not be considered for any open positions. Ensure you have all the qualities and experience listed in the job description before applying or your resume will be discarded. If directions are not followed as per above, your resume will be deleted form the system and you will be forced to re-apply following all terms outlined.PLEASE READ BEFORE APPLYING.\r\nBe advised that you are only required to apply for ONE position. Pick your best employment opportunity and only apply once. If you apply for more than one position, all applications will be deleted and you will not be considered for any open positions.\r\nEnsure you have all the qualities and experience listed in the job description before applying or your resume will be discarded.\r\nIf directions are not followed as per above, your resume will be deleted form the system and you will be forced to re-apply following all terms outlined.

Cuts, trims and prepares raw meat for sale using saws, knifes, grinder, and tenderizer.For additional information about pay ranges,.We offer a comprehensive package of benefits including paid time off, health benefits (medical/dental/vision/hearing aid/pharmacy/behavioral health/employee assistance)

Job DescriptionAbout Us: We are a fast-paced, fabrication-heavy sign shop producing custom signage, displays, and installations. Our work involves a mix of woodworking, metal, plastics, vinyl, and hands-on problem solving. Were looking for a reliable, hard-working individual who enjoys building, fixing, and working with their hands. Position Overview: This is a hands-on shop position assisting with the fabrication and assembly of signs and related projects. No two days are the same youll be cutting, assembling, prepping materials, and helping keep the shop running smoothly. Responsibilities: • Assist with fabrication of signs (cutting, assembling, sanding, painting, etc.), • Operate basic shop tools and equipment (drills, saws, sanders, etc.), • Help with material prep and organization, • Load/unload materials and assist with deliveries when needed, • Maintain a clean and safe work environment, • Support installers and fabricators as neededQualifications:, • Experience with hand tools and basic power tools required, • General handyman, construction, or shop experience preferred, • Ability to read a tape measure accurately, • Comfortable working on your feet and lifting 50+ lbs, • Strong work ethic and attention to detail, • Willingness to learn and take directionBonus Skills (Not Required):, • Welding or metal fabrication, • Woodworking or carpentry, • Vinyl application or sign experience, • Painting/finishing experienceWhat We Offer:, • Competitive pay based on experience, • Opportunity to learn a skilled trade, • Steady, full-time work, • Team-oriented environment

Job Description Labor One Staffing is now Hiring Ship Fitters for Florida Shipyard Ship Fitters Please call for full details • Clara (850)252-3345 The position requires a working knowledge of procedures, strong mechanical aptitude and ability to read blueprints and be able to follow directions. The individual must possess experience in the trade, knowledge of ship terminology, blueprint reading, measurements, and the ability to interpret job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. Long term project Housing assistance available Great Hours with overtime pay M-Th = 10 hours / Fri = 8 hours PLUS some Sats & Sun Per-diem available for those that qualify Call Clara for full details – (850)252-3345 Se habla español Hable hoy!!! Estamos contrando Shipfitters/ Fitters de estructura para Shipyard en Florida. Se debe de leer planos, tener experiencia en construccion de barcos. QUALIFICATIONS AND EXPERIENCE • Ability to comprehend instructions, drawings, and general correspondence., • Comprehensive understanding of ship new construction terminology and ship compartment location nomenclature., • Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), • Ability to effectively confer job related information to the structural supervisor and small groups., • Ability to read and interpret structural drawings (including weld symbols), sketches, specifications., • Experience fabricating templates, squaring plates, scribing in structures, and installing perpendiculars on ships in accordance with drawings, specifications, or sketches., • Experience using oxy-acetylene torch and Plasma for cutting and washing., • Experience using hand and power tools safely including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., • Understand the proper use and operation of structural shop fabrication equipment, including shears, punches, come alongs and brakes., • Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., • Possess a working knowledge of, and be able to take measurements using the metric system., • Three (3) years of related experience., • Must comply with OSHA standards and Shipyard best safety practices., • Appropriate PPE must always be worn.

Job DescriptionSalary: Job Title: Contract Marine Construction Laborer Job Summary: The Marine Laborer plays a critical role in the construction and maintenance of marine and coastal infrastructure projects. This position involves performing various manual labor tasks to support the construction, repair, and maintenance of piers, docks, seawalls, and other marine structures. The ideal candidate will have experience in heavy civil construction, a strong work ethic, and the ability to work in challenging environments. The period of employment will start on October 1, 2024, and ends after 4 weeks. Although there could be an opportunity to gain full time employment, it would depend on the need of the company, as well as the skills of the personnel. The project will be with JEA and will be in Jacksonville, FL. The work schedule will be 7 days a week, 12 hours a day, and there will be both day and night shifts. Key Responsibilities: • Operate and maintain various types of construction equipment and tools, including but not limited to jackhammers, drills, saws, and concrete mixers., • Perform tasks such as concrete demolition and concrete forming., • Must have the ability to work in confined spaces, climb ladders, and work at heights with fall gear., • Load, unload, and transport construction materials and equipment to and from the worksite., • Follow all safety protocols and procedures to ensure a safe work environment for all team members., • Work collaboratively with other team members, including heavy equipment operators, excavators, welders, and commercial divers, to complete projects on time and within budget. Qualifications: • High school diploma or equivalent., • Minimum of 2 years of experience in heavy civil construction but not a requirement., • Ability to operate and maintain construction equipment and tools., • Strong understanding of construction techniques and best practices., • Physical stamina and strength to perform manual labor in various weather conditions., • Basic knowledge of safety regulations and practices in construction., • Must pass a background check., • Valid drivers license and reliable transportation., • Certifications in OSHA safety training and other relevant areas are a plus. Work Environment: • Work is performed outdoors in all weather conditions, including extreme heat, cold, and rain., • May be required to work at heights, in confined spaces, and on uneven terrain., • Regularly exposed to noise, dust, and other construction site hazards. Physical Requirements: • Ability to lift and carry heavy objects (up to 50 lbs.) frequently., • Ability to perform physically demanding tasks such as digging, lifting, and climbing., • Ability to stand, walk, and work on feet for extended periods. Equal Opportunity Employer. Employment opportunities are based on one's qualifications and capabilities to perform the essential functions of a particular job. All employment opportunities are provided without regard to race, religion, sex, pregnancy, childbirth, or related medical conditions, national origin, age, veteran status, disability, genetic information, or any other characteristic protected by law. This Equal Employment Opportunity policy governs all aspects of employment, including, but not limited to, recruitment, hiring, selection, job assignment, promotions, transfers, compensation, discipline, termination, layoff, access to benefits and training, and all other conditions and privileges of employment.

Job Description Duties and Responsibilities • Expert understanding of and ability to accomplish, • NAVSEA Standard Item (NSI) 009-73 requirements, • Inspection, testing, installation, removal, and repair of shipboard electrical cabling and electronic equipment, • Cable installations include banding, boxes, connectors, equipment, penetrations, cableway, hangers, and associated components, • MCT, MCP, Stuffing Tube opening, packing, closing, and testing, • Bonding and Grounding of Electrical Equipment, • NSI 009-25 requirements, • The installation of modification kits, overhaul, repair, disassembly, reassembly of various electrical/ electronic equipment using drawings, kit instructions and NSI 009-16 and 009-36, • Create, finalize and submit Work Authorization Forms (WAF) along with developing and tracking WAF Logs and Tagouts, • Create, finalize, submit and track Conditions Found Reports (CFR), as required., • Interpret and breakdown work scope from blueprints and drawings (arrangement, block-wiring, isometric, cable routing, power, lighting, and IC system removal/installation), • Electronic troubleshooting, use of multimeters and network testers, • Electrical Fit up – use of grinders, reciprocating saws, drills., • Lead multiple electronic teams in the execution of multiple electronics work items or ship alterations., • Track and report job physical progress and budgets to Shipboard Supervisor and/or Project Manager, • Required to have personal tools to include but not limited to, • Multimeter, • Hand tools, • Connector termination tools (DMC, RJ45 crimpers, soldering iron, etc.), • Perform all work in accordance with the established policies and procedures detailed in the Waveforce Electrical Safety Manual, • Capability to work on ships, barges and submarines, • Five (5) years direct experience in shipboard electronic installation and repair services, • High School Diploma or Equivalent, • Must be at least 18 years of age, • NSI 009-73 Qualified Connector Fabrication Certification (coaxial, triaxial, ethernet, and multi-pin connectors) required., • NSI 009-123 Fiber Optic Handling, Termination and Testing Certification required., • Must be able to pass Waveforce Electrical pre-employment drug and background screening, • Must be able to obtain government facility and/or shipyard access, to include a DBIDS credential, as required by work locations., • Must successfully complete OSHA 10 Hour Training, Virginia Ship Repair Association (VSRA) Safety Orientation and all required Environmental, Health and Safety orientation training after initial employment, but prior to shipboard work. UlM4xmLOC4

Job Description Growing Custom Closet / Organizational Space company is looking for a full-time drawer maker and shop worker. Duties include making custom drawers, using table saws, hand tools and measuring tools. Duties also include edge-banding, assisting the CNC operator, Loading the installation trucks, making doors, etc.