Senior structural engineer jobs in New York, New YorkCreate job alerts

Job Description H&H is seeking a Bridge Inspection Quality Control Engineer to join the firm’s New York City Asset Management team. This senior technical role provides quality control oversight for NBIS-compliant bridge inspection programs supporting public agency clients throughout the New York and New Jersey Metropolitan areas. The Quality Control Engineer is responsible for ensuring accuracy, consistency, regulatory compliance, and timely delivery of bridge inspection submittals across multiple concurrent programs. This position works closely with inspection teams, program managers, and agency representatives to enforce quality standards and support continuous improvement in inspection practices. With more than 139 years of experience, H&H is a trusted full-service infrastructure engineering firm. With over 600 professionals across 32 offices nationwide, H&H delivers comprehensive solutions across the full project life cycle, including planning, design, construction, inspection, and asset management. Responsibilities • Serve as the principal Quality Control Engineer for bridge inspection projects in accordance with FHWA National Bridge Inspection Standards, AASHTO Manual for Bridge Evaluation, NYSDOT Bridge Inspection Manual, NJDOT policies, and other agency-specific requirements, • Perform independent field quality control reviews of inspection teams to verify accuracy of condition assessments, element-level ratings, critical findings identification, and field documentation, • Conduct detailed office quality control reviews of inspection reports, NBI and SNBI data entries, scour evaluations, load rating inputs when applicable, and flagging documentation, • Ensure inspection deliverables are accurate, complete, properly signed and sealed as required, and submitted in compliance with regulatory timelines, • Coordinate directly with clients including NYSDOT, NJDOT, Port Authority of New York and New Jersey, and other agencies to resolve technical discrepancies and implement corrective actions, • Oversee quality assurance processes including sampling reviews, independent verifications, control inspections, and performance audits, • Mentor and train Team Leaders and Assistant Team Leaders on inspection standards, condition state coding, advanced inspection techniques, and best practices for complex structures, • Collaborate with inspection teams, program managers, and multidisciplinary groups to integrate quality control findings into bridge management and preservation strategies, • Monitor evolving NBIS requirements, FHWA guidance, AASHTO interim updates, and state-specific inspection policies, • Support business development efforts through technical proposal contributions and client presentations related to inspection quality and compliance, • Bachelor’s degree in Civil Engineering or Structural Engineering; Master’s degree preferred, • Active Professional Engineer license in New York; additional state licenses preferred, • Minimum of ten years of experience in bridge inspection, evaluation, or structural engineering with demonstrated quality control or supervisory responsibilities, • FHWA or NHI-approved comprehensive bridge inspection training with current refresher courses, • Demonstrated expertise in quality control and quality assurance processes for NBIS-compliant inspection programs, • Strong familiarity with NYSDOT, NJDOT, Port Authority of New York and New Jersey, and other regional agency inspection requirements, • Thorough knowledge of NBIS regulations, AASHTO Manual for Bridge Evaluation, SNBI element ratings, condition assessment practices, and load rating integration, • Proficiency with bridge inspection software, Microsoft Office, and digital documentation systems, • Strong analytical skills, exceptional attention to detail, and excellent written and verbal communication abilities, • Ability to perform field quality control activities, including work at heights, in confined spaces, and in varying weather conditions Salary range — $150,000-$180,000 annually. Commensurate with experience We offer a professional work environment, a competitive salary, a benefits package, and 401(k) EOE M/F/DISABILITY/VETS

Job DescriptionCompany Description MEET MAE Mae is a venture-backed digital health solution on a mission to improve the health and quality of life for mothers, babies, and those who love them. Mae has created a space where complete digital care meets culturally responsive, on-the-ground support. We address access gaps and bolster physical and emotional well-being through continuous engagement, risk assessment, early symptom awareness, and a community-led model of support for our users. Mae has demonstrated traction with healthcare payers as a solution to address the implicit, explicit, and structural biases that hinder equitable maternal health. In addressing whole-person care and focusing on self-advocacy, education, and community, we seek to improve the outcomes for mothers, while also reducing clinical costs of care at impactful scale. See what we’re doing at MeetMae.com, and @maehealthinc on IG. At Mae, we are: • Solution-Oriented. We make every problem an opportunity to improve., • Curious. We demonstrate focused curiosity., • Mission-connected. We ensure mamas and doulas are heard., • Adaptable. We learn, adapt, and execute., • Data-driven. We quantify the uncertainty., • Accountable. We own our decisions and their outcomes., • Transparent. We don’t hide the hard stuff.Job Description We’re looking for a senior full stack software engineer who is passionate about maternal health equity to build and shape key features of Mae’s platform. This is an opportunity to be an early team member of a venture-backed digital health start-up. Qualifications Key responsibilities include: • Design and build new features across the stack in an agile & collaborative environment, • Evaluate technical & product tradeoffs, and translate product goals into code, • Write well-documented & tested code, • 5+ years of hands-on experience building full stack web applications, • Passion for user experience (you care about small design details) as well as experience of frontend technologies across the web, • A structured approach to development, testing, documentation, and code structure, • Clear communicator with ability to explain trade offs to non-engineers, • Ability to quickly learn new tools & technologies as product requirements evolve, • A love of types (& deep familiarity with Typescript), • Experience with setting up infrastructure on AWS Additional Information Technology we use Typescript, React, InertiaJS, NestJS, TypeORM, Postgres, Terraform Benefits include: • Competitive salary and equity package, • Healthcare benefits, • 401K with matching, • Flexible work location Additional Information • Salary range: $150,000 - $170,000 annually, depending on experience This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9.

Job Description 2Bridge Partners has been engaged in the search for a Software Engineer with our FinTech client. Join a small, growing, well-capitalized, and revenue-producing company building the next generation of OMS/EMS servicing the hedge fund industry. Our client offers a competitive package with a base salary, bonus, and full benefits—medical, dental, vision, PTO, etc. They have offices in the Metro NYC area and would prefer someone accessible to the office who can work one day a week onsite. However, they are open to remote work for someone with a depth of experience architecting and developing trading systems for a hedge fund, prime, bank, etc. Overview: Seeking a Senior Backend Software Engineer with experience in design, development, and support of cloud and microservice-based, event-driven financial systems. The candidate should have a robust background in creating scalable, multi-tenant software systems focusing on real-time distributed technologies, preferably trading systems or other high-volume scalable applications. Applicants should be adept at enhancing system security and performance and managing high-volume API and web interfaces with stringent requirements for low response times. A proactive mindset toward creating modular, clean, and reusable code where commonplace solutions fall short is also required. Primary Responsibilities: • Lead the development and structural enhancement of scalable distributed computing systems., • Oversee and guide the architectural design and implementation of critical system components., • Optimize performance across various system layers for enhanced efficiency., • Bachelor's Degree in Computer Engineering or another relevant discipline., • Minimum 3 years of backend software development and architecture experience, specifically in C#.NET environments, using Petapoco, Swagger, or other ORMs., • Extensive expertise in backend development, with a strong emphasis on database design, optimization, and management, as well as proficiency in interprocess communication techniques for distributed systems, • 3 years of experience building event-driven systems leveraging RabbitMQ, SQS, Kafka, etc, to handle messages that arrive asynchronously and trigger appropriate actions., • Demonstrated capability in analytical and evaluative techniques., • Excellent organizational skills, with a keen ability to manage tasks and priorities effectively., • Independent initiative taker, skilled in problem-solving before escalation., • Ability to discern when collaborative input is necessary for optimal outcomes.

Job Description We are currently hiring a Senior Plumbing and Fire Protection Engineer in our Building Engineering division at our Poughkeepsie, Albany, White Plains, or NYC, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Senior Plumbing and Fire Protection Engineer will work with clients to provide plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team, provide leadership to Jr Engineers, and be capable of developing new business. This position offers the opportunity to transition into a leadership role for the office. Duties: • Supervise plumbing and fire protection engineering staff to develop concepts, strategies, construction documents and engineering reports for new buildings and renovation projects., • Ability to provide mechanical leadership for both large multi-discipline design projects including plumbing, process piping systems, and fire protection design., • Responsible for code review of plumbing and fire protection systems., • Responsible for plumbing and fire protection design related to corrections, higher education, laboratory, medical, and other typical market sectors., • Ability to complete fire protection hydraulic calculations using industry software programs., • Interact directly with clients technically by completing analysis of design options, cost benefit comparisons, and communicating results to assist owner in decision making process., • Responsible for directing plumbing and fire protection project team to meet project goals and maintain quality work product., • Manage the mechanical project financial performance and schedule., • Client and Business Development., • Proposal writing to initiate new business., • Minimum of 10 years of experience with a professional A/E services firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Strong writing, organizational and communications skills, • Ability to work under pressure, and multi-task efficiently, • New York Professional Engineer’s License is a preferred Salary Range: $90,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Civil Transportation Engineer Location: Long Island & New York City Compensation: Up to $120,000, based on experience About the Company An established and growing consulting engineering firm with offices in the Northeast and beyond is seeking a Civil Transportation Engineer to support transportation infrastructure projects in the Long Island and NYC area. This firm provides comprehensive services across civil, structural, traffic, environmental, mechanical, and electrical disciplines, serving both municipal and private sector clients. Position Overview The Civil Transportation Engineer will play a key role within the Transportation and Infrastructure group, supporting the design and development of roadway, highway, and traffic-related projects. This is an excellent opportunity for a mid-level engineer to work on diverse public-sector transportation initiatives and collaborate with experienced technical professionals in a fast-paced, supportive environment. Key Responsibilities * Assist in the geometric design and development of roadway/highway alignments * Design roadway pavement markings and signage * Support work zone traffic control plans in coordination with traffic engineers * Assist with drainage and utility design as it relates to roadway infrastructure * Prepare reports, cost estimates, technical specifications, and construction documents * Provide technical oversight and mentorship to junior staff * Work closely with senior engineers and project managers to meet project objectives * Coordinate with public agencies and multidisciplinary teams Qualifications * Bachelor's degree in Civil Engineering * Minimum of 4 years of experience in civil/transportation design * EIT preferred * Familiarity with roadway/highway design standards and best practices * Excellent communication and interpersonal skills * Strong proficiency with Microsoft Office (Word, Excel, Outlook) * Experience with AutoCAD or MicroStation * Experience with Civil 3D or InRoads/OpenRoads is a plus Skills & Tools * AutoCAD / MicroStation * Civil 3D or InRoads/OpenRoads (preferred) * MS Office Suite * Ability to manage multiple priorities and collaborate across teams Why This Role * Opportunity to contribute to high-visibility public infrastructure projects * Collaborate with a seasoned and respected transportation team * Supportive, team-oriented environment with growth potential * Competitive compensation up to $120,000 based on experience Qualified candidates who are looking to grow their career in civil transportation engineering within a stable and well-respected firm are encouraged to apply.

Job Description With over 40 years of industry leadership, CP Engineers delivers innovative solutions in site/civil, water/wastewater, municipal, MEP, and environmental engineering. Our diverse portfolio spans private, municipal, county, and regional clients—many of whom have partnered with us for decades. Join a fast-growing team dedicated to technical excellence, client satisfaction, and professional growth. Remote work flexibility, competitive compensation and benefits, and a supportive culture have helped CP earn Best Places to Work in NJ awards for three years straight and have driven strong employee retention. Position Overview: CP Engineers is seeking a highly skilled Senior Mechanical Engineer to provide technical leadership and mentorship within our mechanical engineering team. This role is responsible for developing project scopes, preparing budget estimates, and overseeing mechanical design work to ensure the delivery of high‑quality, accurate, and consistent engineering outputs across the organization. The Senior Mechanical Engineer will review, sign, and seal mechanical drawings and will also contribute hands‑on design support as required. Project work may include mechanical systems for commercial and industrial buildings, water and wastewater pump stations, treatment facilities, and various municipal infrastructure projects. Technical & Design Responsibilities: • Lead mechanical engineering design for HVAC, plumbing, and mechanical systems across commercial, industrial, municipal, and infrastructure projects., • Perform mechanical calculations, equipment selections, system sizing, and detailed technical analyses., • Prepare and seal engineering drawings, specifications, and reports in accordance with state PE requirements., • Conduct system modeling (e.g., energy modeling, load calculations) to optimize system performance., • Review and approve design documents prepared by junior engineers and CAD staff., • Ensure all designs meet applicable codes (IMC, IPC, NFPA, ASHRAE, OSHA, local/state regs)., • Process design experience a plus., • Serve as the mechanical discipline lead on multi‑disciplinary project teams, coordinating closely with electrical, structural, civil, and water resources groups., • Develop complete plan sets, technical specifications, and bid/construction documents., • Support construction-phase services: respond to RFIs, review submittals, conduct field inspections, issue punch lists, and prepare site visit reports., • Maintain compliance with firm-wide QA/QC procedures., • Review design deliverables for technical accuracy, constructability, and regulatory compliance., • Verify that designs meet safety, reliability, maintainability, and operational requirements., • Meet with clients to define project scope, requirements, and technical expectations., • Provide technical guidance, recommendations, and solutions during planning and project execution., • Support proposal writing, project budgeting, and mechanical scope development., • Provide technical mentorship to junior mechanical engineers, EITs, and designers., • Support staff development through training on codes, design standards, and best practices., • Oversee workload distribution, task assignments, and schedule adherence for mechanical discipline tasks. Compensation: $105,000-$135,000 Requirements • Degree in Mechanical Engineering or equivalent from an accredited university., • Maintain active Professional Engineer (PE) license in NJ (or ability to obtain via reciprocity)., • Minimum 7-10 years of mechanical engineering experience, with a track record of leading, mentoring, or supervising other engineers., • Represent the firm at industry events, technical conferences, or professional association meetings as needed, • Excellent ability to review and critique designs and provide constructive guidance., • Strong verbal and written communication skills, high attention to detail, and the ability to work collaboratively in a team environment., • Understanding of construction processes and field coordination, with the ability to support field engineers when necessary., • A valid driver’s license and dependable transportation., • Flexible Work Options: Hybrid/remote work arrangements, • Work/Life Balance: Flexible hours, 20 days paid time off, • Financial Security: 401(k) with 4% company match, • Professional Growth: Tuition reimbursement, professional license and association fee coverage, • Comprehensive Health: Medical, dental, and vision insurance, • Supportive Culture: Commitment to employee well-being and career development

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Company parties, • Competitive salary, • Free food & snacks The ideal candidate preferences include a Professional Engineer license (please list all applicable states) and/or someone working under a PE and/or working towards a Professional Engineer License (not mandatory/requirement). Applicants without a PE license but have senior level relevant experience working with the above referenced scopes are heavily encouraged to apply. The candidate must be comfortable with full analysis and design of building components/stability. Candidate must be proficient and competent with steel, engineering codes (AISC, IBC, ACI, OSHA, ASTM, Chapter 33 NYC Building Code), connections, footings, support of excavation, concrete, floor system/underpinning, etc. Please attach resume and cover letter as well as list any projects completed that are related to this type of work. Salary is flexible based on experience in industry and knowledge

Job Description Patuxent Engineering, LLC is seeking a Senior Structural Engineer for our NYC/NJ Office located in Metuchen,NJ. Ideal candidate should have relevant experience in concrete, steel, and foundation design, as well as Mechanical Methods. Patuxent Engineering, LLC provides construction engineering and support services in the high rise building industries and heavy construction industry. Our services include temporary structures, shores, SOE, Existing Structure Stability evaluations, as well as material and personnel vertical transportation solutions, worker access solutions, heavy equipment applications as well as means and methods. Preferred candidate PE or Pending PE(EIT). Please attach a cover letter, resume, and list your salary requirements when responding with contact information.

Job DescriptionAre you ready to join a growth-oriented team where creativity meets innovation? At Ware Malcomb, we are a dynamic and forward-thinking design firm committed to pushing the boundaries. Our team-oriented, collaborative approach ensures that every project is a blend of visionary design, seamless project delivery, and we are actively engaged with both the community and the industry. Discover our vibrant culture to get an inside look into life at Ware Malcomb and the programs we offer. The Civil Engineering Manager is a key member of the Ware Malcomb senior management team, responsible for the growth, revenue, profitability, staff management and overall client relationships for the North East civil engineering market. As Civil Engineering Manager, you will also be responsible for nurturing a positive, team-oriented environment, ensuring financial goals and deadlines are being met, assisting in business development and managing select projects. Ware Malcomb offers a great opportunity to lead a civil engineering practice, while benefiting from the platform, resources and support provided by an international, multidisciplinary design firm. Your Role • Prepare proposals and contracts for civil engineering projects, • Review of project revenue projections, monthly financial reports and monthly business reports, • Manages select projects, • Responsible for the growth and profitability of group, • Attend hearings and planning meetings, • Consistently market and promote getting new work for Ware Malcomb, • Attend relevant networking functions and set up regular meetings with clients, • Responsible for operations of the group, • Train, mentor and oversee the work of team members, • Responsible for recruiting and hiring new team members Qualifications, • 10+ years of civil engineering experience, specifically in the field of Land Development, • Experience at the Project Manager or Senior Project Manage level. Prior leadership experience preferred., • Experience developing and maintaining client relationships, • Professional Engineer (PE)

Job DescriptionCompany Description At KPFF Consulting Engineers, we are more than just an engineering design firm. For over 60 years, we have dedicated ourselves to innovative, sustainable engineering that shapes the built environment and tackles complex infrastructure challenges. Our team culture emphasizes balance, growth, and well-being, supporting each member’s professional journey with flexibility, generous benefits, and a collaborative approach to work-life integration. With over 1,400 professionals across 27 offices nationwide, KPFF’s decentralized structure allows each office the flexibility to pursue projects aligned with their regional strengths. Learn more at . Job Description We are seeking an Entry-Level Structural Engineer to join our growing engineering team in New York. This role offers an excellent opportunity for recent graduates or early-career professionals to advance their structural engineering skills while working on diverse and impactful projects. As a KPFF engineer, you will collaborate closely with experienced engineers to assist in the analysis, design, and documentation of various structural systems. • Assist in Structural Analysis and Design: Contribute to the analysis and design of building components, utilizing industry-standard software under the guidance of senior engineers., • Prepare Structural Calculations and Documentation: Perform structural calculations, prepare technical documents, and assist in the development of comprehensive project documentation., • Support Design Development: Help senior engineers in creating design solutions for various structural systems, ensuring adherence to project requirements and industry standards., • Create and Modify Structural Drawings: Use AutoCAD or similar software to develop and update structural drawings, ensuring accuracy and quality., • Participate in Site Visits: Conduct site visits to assess existing structures, monitor construction progress, and support the evaluation of structural integrity., • Prepare Engineering Reports: Assist in creating detailed structural engineering reports and documentation to support project deliverables., • Collaborate with Multi-Disciplinary Teams: Work closely with architects, contractors, and other stakeholders to ensure cohesive and efficient project execution., • Maintain Project Records and Documentation: Organize and manage project records to maintain clear, accurate documentation throughout the project lifecycle., • Support Quality Control: Contribute to quality control processes, ensuring structural designs meet company and industry standards.Qualifications, • Bachelor’s degree in Civil Engineering or Structural Engineering, • Engineer in Training (EIT) certification, or a clear path to obtain within the next six months, • Proficiency in structural analysis software (e.g., AutoCAD, ETABS, SAP2000, or similar), • Strong understanding of structural engineering principles and mechanics, • Basic knowledge of building codes and construction standards, • Proficient in Microsoft Office Suite, • Strong analytical and problem-solving skills, • Excellent attention to detail and organizational abilities, • Effective written and verbal communication skills, • Ability to work both independently and as part of a team, • Ability to sit or stand for extended periods while working on a computer, reviewing plans, or conducting site visits., • Capacity to move around project sites, climb ladders, and navigate uneven terrain., • Occasionally lifting up to 15 pounds of equipment or materials. Additional Information Compensation The base salary for this role is competitive, with a range of $85,000 - $90,000, determined by experience, education, and skills. KPFF also offers performance-based bonuses to recognize outstanding contributions. Additional details about the full compensation package will be provided during the interview process. Culture and Benefits At KPFF, we offer a rewarding career path that emphasizes autonomy, innovation, and professional development. Our culture prioritizes employee ownership, teamwork, and shared values, creating an environment where contributions are celebrated, and career growth is encouraged. We aren’t just colleagues; we’re a community dedicated to collaborative innovation, providing you the platform to make a lasting impact on meaningful projects. KPFF Employee Benefits • Medical Plan Options: Choice of Traditional PPO or HDHP with HSA, covering preventive care and prescriptions., • Flexible Spending Accounts (FSA): Tax-advantaged accounts for healthcare and dependent care expenses., • Dental & Vision: Full preventive care, plus coverage for major dental services and vision allowances., • Employee Assistance Program (EAP): Free, confidential support for personal, family, and work challenges., • Life & AD&D Insurance: Company-provided life insurance equal to one year’s salary, plus AD&D., • 401(k) Retirement Plan: KPFF contributes 3% of salary, with no match needed., • Disability Insurance: Short-term and long-term coverage at 60% income, fully covered by KPFF., • Paid Time Off: Generous PTO, two floating holidays, and paid company holidays., • Professional Development: Individual development budget, weekly lunch-and-learns, and monthly social events. KPFF Consulting Engineers participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. KPFF Consulting Engineers is an equal opportunity employer and considers all qualified applicants for employment without regard to race, color, creed, ethnicity, national origin, religion, marital status, sex/gender (including sexual orientation or gender identity), pregnancy, veteran status, citizenship status, physical or mental disability, or any other protected basis.

Job Description Position Overview: We are seeking a licensed Professional Engineer with expertise in structural forensic engineering to join our team. This role focuses on investigating structural failures, performing root cause analyses, and developing repair and remediation solutions. The ideal candidate will combine technical excellence with strong communication and project management skills to deliver expert evaluations and actionable recommendations for our clients. Key Responsibilities: • Conduct forensic investigations of structural systems, including buildings, bridges, and other civil/structural infrastructure., • Perform site inspections, field testing, and data collection to determine the cause of structural issues or failures., • Analyze structural performance using calculations, modeling, and applicable building codes and standards., • Develop detailed technical reports outlining findings, conclusions, and recommended solutions., • Design repair or remediation plans and oversee implementation during construction phases., • Provide expert witness testimony, when required, for litigation or insurance claims., • PE license required, • Degree in Civil/Structural Engineering or closely related field (advanced degree preferred), • 8+ years of experience, • Experience with forensic structural engineering investigations related to buildings, structures, and infrastructure systems, • Experience with client development and project management; experience with insurance and legal sector clients is a plus Salary Range: $100k - $200k base salary (commensurate with the level of experience and expertise of the candidate) Bonus compensation eligible Who we are: We are CTLGroup, a team of engineers, architects, scientists, and consultants who are seasoned technical experts possessing unparalleled experience, knowledge, and testing proficiency in structures and materials. Our integrated team is backed by one of the most sophisticated commercial structural and building materials laboratories in the United States. Whether providing technical consultation, conducting laboratory studies, performing failure investigations, or offering expert testimony, we aim to solve our clients' problems and assist in achieving their objectives. Beyond delivering mere data, our team provides a foundation of confidence upon which our clients can build. *This job description describes the general nature of the position. The above declarations are not intended to be a complete list of responsibilities, skills and abilities required to do the job.CTLGroup provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Who We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. The Role Job Summary We are seeking an energetic, registered architect/licensed civil/structural engineer with strong experience in building façade projects, FISP inspections and familiarity in handling building façade projects in New York city area. The Senior Facade Architect/Engineer is responsible for leading and managing building façade architectural and engineering projects, overseeing design development, providing technical expertise, and ensuring the successful delivery of projects within scope, budget and timeline. Responsibilities and Duties: • Coordinate and manage internal kick-off, milestone, and closeout meetings for projects, fostering effective communication and collaboration among team members and stakeholders., • Verify schedules and ensure adherence to project plans and timelines, both internally and with external resources, to meet project objectives efficiently., • Conduct and coordinate on-site inspections, documenting existing conditions, performing field testing, photographing, and creating hand-sketches. Observes/ tracks work in progress to ensure compliance with project specifications., • Coordinates the recording of accurate field measurements and performs calculations throughout the duration of the project., • Prepare written correspondence with clients and contractors, maintaining clear and professional communication throughout the project lifecycle., • Understand and review investigation reports and bid documents, including drawings and technical specifications, to ensure accurate interpretation and implementation., • Communicate project status and proactively address any issues or discrepancies that arise. Escalate unresolved issues to their direct supervisor in a timely manner., • Maintain organized records, files, drawings, and other essential project data ensuring that they are appropriately filed within the company’s systems for easy accessibility and future reference., • Collect post-project feedback to identify areas of improvement and communicate the feedback to their direct supervisor., • Keep up to date with job knowledge and industry trends through active participation in educational workshops, reviewing professional publications, and engaging in professional societies and networks., • Engage in networking activities and represent the company at events, seminars, continuing education presentations. Actively seek marketing opportunities to promote the organization’s presence in the industry., • Performs other duties as related to the position as assigned by the firm, demonstrating flexibility and adaptability to contributing to the overall success of the team. Special Requirements Technical • Provide technical guidance and expertise to the team throughout the design and construction phases, ensuring compliance with relevant regulations, codes and standards., • Performs and coordinate design, calculations and drawings., • Performs peer review of other technical data prepared by internal Engineers/Architects as well as third party entities., • Perform and coordinate forensic inspections, applying technical expertise to assess project conditions and identify potential issues or deficiencies., • Able to serve as an expert witness and depositions, mediations, or litigation., • Conducts a wide range of testing, including but not limited to material testing, structural analysis and performance evaluations. Supervises testing activities and ensures accurate data collection for accurate interpretation of results., • Generate comprehensive field reports detailing observations, measurements, and findings from site visits and inspections., • Generate expert reports that provide in-depth analysis, conclusions, and recommendations based on project requirements and findings., • Collaborate with cross-functional teams, including clients, contractors and consultants to coordinate project activities and resolve technical issues., • Collaborate with legal teams and represent the firm in mediations, providing expert opinions and strategic guidance., • Participate in meetings with clients and stakeholders to understand project objectives, present design proposals, and provide technical recommendations., • Works closely with the team to understand the scope of work, budget, goals, deliverables, and timeline to ensure project success. Education • Professional Engineer or Registered Architect license required., • Maintain compliance with licensing requirements and applicable regulations., • OSHA-10 Certification, • Proficient written and verbal communication abilities., • Attention to detail and accuracy in project documentation and deliverables., • Strong project management and organizational skills and ability to handle multiple projects concurrently., • Knowledge of building codes, regulations, standards and familiarity with FISP inspections and local law regulations on inspections., • Professional and courteous interaction with clients and colleagues., • Ability to attend client meetings and events, as needed., • Flexibility to work overtime, as needed., • Familiarity with drafting software for positions that utilize the software (AutoCAD, BricsCAD, Revit) for positions that utilize the software., • Strong teamwork and collaboration skills, fostering a positive and productive work environment, along with the ability to work both independently and collaboratively with team members from various disciplines., • Ability to work in the field and to travel outside local areas as workload and projects when needed. Lifting • Safe operation and use of ladders, scaffolds, and other access equipment as required., • Exposure to prolonged periods outdoors, which might extend beyond 3 hours., • Ability to work in diverse weather conditions, including but not limited to:, • Temperatures above 85°ree;F or below 40°ree;F., • High humidity levels (above 90%). Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR vNQ6EEkP4a

Job Description Job Title: Structural Engineer Location: New York, NY 10001 Work Schedule: Normal business hour Monday to Friday Job Type: Contract to Hire Pay Rate: $70 to $80 per hour Position Overview Job Description We are seeking talented Senior Structural Engineers for our New York Offices. The applicant should have a bachelor's or master's degree in civil or structural engineering and the ability to obtain a PE license. The candidate will work under the direction of Our Partners and Project Managers in engineering design, structural analysis, and construction administration for a new reinforced concrete building, with portions structural steel. Knowledge of Finite Element Analysis and Nonlinear Analysis of Structures using SAP2000, ETABS, RAM Structural SAFE software, also AutoCAD, Revit, and parametric analysis software Grasshopper are a plus. This position is full-time and will be in-person in the office five days per week. Roles & Responsibilities Senior Structural Engineer responsibilities include: • Design and analyze structural systems for a new building project., • Collaborate with architects, contractors, and other engineers to develop project designs., • Assist in project management tasks such as coordination of internal and external comments and to-do items., • Prepare detailed structural drawings and reports using software like AutoCAD and Revit., • Review construction plans for accuracy and adherence to specifications., • Ensure projects comply with local building codes and regulations., • During the construction phase, assist with review of submittals and RFI's., • Bachelor's or master's degree from an accredited engineering program The ideal candidate should have a strong understanding of structural analysis and design principles, along with proficiency in AutoCAD, Revit, or other relevant engineering software. Excellent communication skills and the ability to collaborate across disciplines are essential. The role requires problem-solving skills, especially under pressure, along with strong project management abilities. A thorough knowledge of building codes, and industry standards is critical for ensuring that all projects meet or exceed expectations..

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Senior Construction Manager with proven experience and expertise in Bridge/Rail projects. The Senior Construction Manager will oversee a multidisciplinary team and lead the project through preconstruction to commissioning for a multi-million dollar bridge repair project. Responsibilities • Lead overall construction planning, scheduling, and execution for major bridge and rail projects., • Apply expert level of knowledge of construction means and methods, materials and techniques for bridge repair., • Manage field operations, subcontractors, and project engineering staff to ensure work is completed safely, on time, and within budget., • Oversee coordination with rail agencies, transportation authorities, utility providers, and other stakeholders., • Review design documents, shop drawings, and technical specifications to ensure compliance and constructability., • Implement and enforce safety programs, quality control procedures, and risk-management strategies., • Ensures adherence to contract terms, performance, quality assurance, compliance requirements, and engineering specifications., • Prepare progress reports, cost forecasts, and change-order documentation., • Serve as the primary on-site project leader, maintaining strong communication with clients, consultants, and internal teams., • Establishes work plan and multidisciplinary staffing of the project and arranges for assignment of project personnel., • Mentor junior staff and contribute to long-term workforce development. Qualifications • Bachelor’s degree in Construction Management, Civil Engineering, or related field (Master’s preferred)., • Active New Jersey Professional Engineer (PE) License is required., • 20+ years of construction project management experience with expert level knowledge of bridge and/or rail projects., • Minimum of 7+ years in a supervisory role, • Management of at least three (3) bridge construction or rehabilitation projects and one (1) completed project involving railroad infrastructure within an active railroad environment., • Strong understanding of track work, rail operations, bridge structures, and applicable codes and standards., • Proven track record of delivering multi-million-dollar transportation projects., • Expertise in project scheduling software (e.g., Primavera P6), document controls, and cost management tools., • Exceptional leadership, communication, and problem-solving skills., • Ability to work in a fast-paced environment and manage multiple priorities. BenefitsNaik offers a competitive compensation package including: • Generous sign-on bonus, • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job Description Job Title: Senior Structural Engineer Location: New York, NY 10001 Work Schedule: Normal business hour Monday to Friday Job Type: Contract to Hire (1st 6 months on Contract then Full-Time) Pay Rate: $70 to $80 per hour Position Overview Job Description We are seeking talented Senior Structural Engineers for our New York Offices. The applicant should have a bachelor's or master's degree in civil or structural engineering and the ability to obtain a PE license. The candidate will work under the direction of Our Partners and Project Managers in engineering design, structural analysis, and construction administration for a new reinforced concrete building, with portions structural steel. Knowledge of Finite Element Analysis and Nonlinear Analysis of Structures using SAP2000, ETABS, RAM Structural SAFE software, also AutoCAD, Revit, and parametric analysis software Grasshopper are a plus. This position is full-time and will be in-person in the office five days per week. Roles & Responsibilities Senior Structural Engineer responsibilities include: • Design and analyze structural systems for a new building project., • Collaborate with architects, contractors, and other engineers to develop project designs., • Assist in project management tasks such as coordination of internal and external comments and to-do items., • Prepare detailed structural drawings and reports using software like AutoCAD and Revit., • Review construction plans for accuracy and adherence to specifications., • Ensure projects comply with local building codes and regulations., • During the construction phase, assist with review of submittals and RFI's., • Bachelor's or master's degree from an accredited engineering program The ideal candidate should have a strong understanding of structural analysis and design principles, along with proficiency in AutoCAD, Revit, or other relevant engineering software. Excellent communication skills and the ability to collaborate across disciplines are essential. The role requires problem-solving skills, especially under pressure, along with strong project management abilities. A thorough knowledge of building codes, and industry standards is critical for ensuring that all projects meet or exceed expectations..

Job DescriptionSenior Structural Engineer - Major Infrastructure ProjectAbout the Opportunity Join a leading civil construction company with a legacy of delivering transformative infrastructure projects that enhance public safety, quality of life, and economic vitality. We specialize in constructing and rehabilitating critical infrastructure, including highways, bridges, tunnels, mass-transit systems, and more. Our commitment to excellence and integrity makes us a trusted partner on large-scale, complex projects that shape communities. We are seeking an experienced Senior Structural Engineer to join our team for a high-profile infrastructure project. This is an opportunity to apply your expertise in structural engineering to impactful projects while collaborating with a team dedicated to technical excellence and innovation. Responsibilities As a Senior Structural Engineer, you will: • Perform advanced structural analysis and design for heavy civil infrastructure projects, including reinforced and pre-stressed concrete, steel, timber, deep foundations, gravity-based foundations, earth retaining structures, crane pick plans, and bridge decks., • Ensure designs comply with all applicable codes, standards, and client requirements., • Prepare and review structural calculations, engineering reports, memoranda, and design submittals., • Develop working/draft construction drawings for collaboration with AutoCAD drafters., • Tackle complex engineering challenges requiring deep knowledge of heavy/highway civil construction and structural engineering., • A Bachelor’s degree in Civil Engineering or a related field from an accredited institution (Master’s degree in structural engineering preferred)., • 10+ years of relevant experience in structural engineering, with specific experience in bridge design and construction., • Professional Engineer (PE) license required, with preference for licensure in New York or New Jersey., • Proficiency in structural finite element analysis software such as MIDAS or RISA., • Strong working knowledge of Excel and Mathcad., • Comprehensive understanding and application of industry-standard codes, including IBC, ASCE 7, ACI 318, AISC Steel Specification and Construction Manual, NDS, AREMA, AASHTO, and AWS., • Active membership in industry organizations (e.g., AISC, AWI, RCSC) and commitment to ongoing professional development., • Ability to manage multiple tasks in a fast-paced environment with minimal supervision., • Excellent written and verbal communication skills. #hc201415

Job DescriptionMatrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at and True-Environmental.com to discover the full scope of our capabilities. Matrix is seeking a Associate Vice President & Senior Director of Engineering Markets – NJ/NY Region to drive business development and project execution in central and northern New Jersey and New York. This is a high-impact, entrepreneurial role for a seasoned civil, structural and/or geotechnical engineering professional who thrives on building client relationships, leading technical delivery, and cultivating teams. You’ll be a visible leader in the region, shaping infrastructure projects, mentoring talent, and expanding Matrix’s footprint. Ready to shape the future of New Jersey and New York’s infrastructure? Apply now at or reach out directly to our recruitment team. Let’s build something extraordinary—together. Salary range is 160k-260k.The final compensation will be determined based on the candidate's qualifications, experience, and internal equity. What You'll Do • Market Leadership & Business Development, • Lead strategic growth in NJ and NY by identifying opportunities and cultivating relationships with public agencies, municipalities, developers, and consultants, • Drive proposal development and pursuit strategy for infrastructure, land development, and municipal projects, • Represent Matrix at industry events and client meetings across NJ and NY metro, • Champion a client-first mindset, ensuring long-term partnerships and repeat business, • Entrepreneurial Spirit & Team Building, • Bring an entrepreneurial approach to expanding services and market share, • Build and inspire high-performing teams through mentorship, collaboration, and shared purpose, • Foster a culture of employee development, ownership, and innovation, • Project Leadership & Technical Delivery, • Serve as Project Manager for civil engineering projects you help bring in, • Oversee design, permitting, and construction phases with a focus on quality and client satisfaction, • Collaborate with multidisciplinary teams across Matrix’s service lines, • Technical Excellence & Mentorship, • Act as a technical leader in civil/site engineering, stormwater, grading, and utility design, • Guide junior staff and contribute to a culture of continuous improvementMinimum Qualifications, • Bachelor’s degree in Civil Engineering or related field (Master’s a plus), • Professional Engineer (PE) license required, • 10+ years of experience in civil/site engineering and project management, • Proven track record as a seller-doer with strong client relationships in NJ and/or NY (NYC agency experience and relationships a plus, as well as regional and national client base), • Deep understanding of state, municipal, and county regulations

Job DescriptionRESIDENT ENGINEER @ WTC18 (24-18) Laland Baptiste, LLC is a certified minority and woman owned construction management and consulting firm. Laland Baptiste provides innovative and professional services throughout all phases of the construction life cycle. We pride ourselves as being loyal and reliable to our customers, clients, and our greatest assets, our people. Laland Baptiste is dedicated to providing unparalleled services throughout the construction life cycle. These services include Construction Management, Program Management, Owners Representation, Resident Engineering, Inspection, Preconstruction Consulting, Change Order Review, Value Engineering, Administration Assistance, Document Control and Staff Augmentation. Our clients include NYS Office of General Services, NYC Health + Hospitals Corporation, State University of New York, Dormitory Authority of the State of New York, NYC Department of Design and Construction, NYC Parks & Recreation, NYC School Construction Authority, NYC Economic Development Corporation, Battery Park City Authority, and NYS Parks, Recreations and Historic Preservation. POSITION – Resident Engineer - Civil, starting immediately. SCOPE – Manage the scope of work, schedule, contractor’s field procedures and construction problems, and other technical information for the successful delivery of projects within budget and schedule. Work generally pertains to building concrete work, civil site work, electrical, environmental, and plumbing knowledge. REQUIREMENTS: • Act as the day-to-day construction manager for assigned projects, reporting to the Senior Resident Engineer., • Assist the Senior Resident Engineer in Coordinating with Facility forces and other stakeholders to advance work in the most efficient manner possible while least impacting facility operations., • Understand the Contract and assist the Senior Resident Engineer in using its clauses to administer and enforce policy necessary to complete projects., • Advise Senior Resident Engineer of contractor disputes and help use the administrative process to resolve., • Oversee field staff – ensure that they are properly carrying out their functions of ensuring proper installation and advancement of construction and that they are filing the proper documentation., • Review contractor payments, assist the Senior Resident Engineer in reporting monthly on construction progress and financial health of projects, and elevate potential issues., • Bachelor’s degree in Civil or Structural Engineering from an accredited College or University., • Minimum 10 years of experience managing construction work, varied in size (projects ranging from $500K to $5 million plus) and complexity (multiple crew and crew sizes per shift)., • Valid driver’s license required., • Experience with Parks projects, • OSHA 30-hour certification required., • In addition to night and weekend shift work, ability to stay late or come in early as needed. bx01Ab9S2U

Job Description Join Our Team! At Tomarco Contractor Specialties / ISAT Total Support, our employees are thriving both inside and outside the office. Our rapid growth is not only because of what we do, but how we do it. It’s simple: our employees are our greatest asset! We value our team members and create an environment where they feel motivated, supported, and appreciated. We perform at high levels, fueled by a diverse team that brings energy, collaboration, innovation, and pride to every project. We foster a workplace centered around teamwork, quality work, and customer satisfaction. INTRODUCTION: Tomarco Contractor Specialties LLP (DBA ISAT Total Support) is seeking an experienced Lead Design Engineer (P.E.) to join our growing engineering team. This senior-level role requires advanced seismic design experience, technical leadership, and the ability to manage complex engineering tasks while supporting companywide engineering initiatives. You will play a key role in developing high-quality design solutions, mentoring junior engineers, and collaborating with project managers, sales teams, and customers to ensure project success. COMPENSATION AND BENEFITS: • Competitive salary based on experience, • Medical, Dental, and Vision coverage, • 401(k) Program with company match, • $100K Life Insurance, • Accelerated growth opportunities, • Exposure to major construction projects, • Nationwide company with multiple branches, • Rewarding, fast-paced work environment, • Inclusive and diverse culture ABOUT US: Tomarco Contractor Specialties, LLP dba ISAT Total Support, is a wholesale distributor in the construction industry with strategic manufacturing partners. Since 1977, ISAT has been a global leader in engineering innovation, fastening systems, seismic bracing, and application-specific construction solutions. We design, manufacture, and distribute non-structural engineering support systems for projects around the world. POSITION OVERVIEW We are seeking a highly skilled and technically driven Senior Design Engineer (P.E. Required) to join our engineering team. This role is central to delivering advanced seismic bracing designs, leading technical coordination, and supporting the development of custom engineering solutions for complex construction projects. The ideal candidate will bring deep engineering expertise, the ability to independently manage technically challenging assignments, and a strong commitment to accuracy, communication, and industry-leading performance. As a senior technical resource within the Capitol Projects Group, you will oversee critical engineering deliverables—including seismic bracing layouts, point load calculations, submittal packages, and 3D modeling coordination—while ensuring all work aligns with ISAT design standards and applicable building codes. You will also mentor junior engineers, support quoting and billing processes, and contribute to improving engineering workflows, tools, and methodologies across the department. This role requires an engineer with advanced knowledge of seismic design for non-structural components, strong AutoCAD-based skills, and the ability to thrive in a fast-paced environment. A Bachelor’s degree in Engineering and an active Professional Engineer (P.E.) license are required for this position. ESSENTIAL DUTIES AND RESPONSIBILITIES: Communication: • Prepare project technical communication including transmittals, coordination summaries, and follow-up correspondence through email and our project database, NEXUS., • Maintain organized and accurate project files accessible to all project personnel., • Build complete submittal packages using provided project data., • Create bracing legends for all trades and configurations, including CBC, IBC, and UFC code formats., • Seismic Bracing Layouts, • Perform kit takeoffs, including accurate counts, nomenclature, and kit IDs for quoting or ordering materials., • 3D Modeling & Coordination (Basic to Competent), • Apply point load charts and compute vertical dead loads and seismic loads., • Produce coordinated point load layouts for submittal to the SEOR., • Expected rate:, • Dead loads: 0.2–0.8 loads/min, • Demonstrate basic proficiency or ability to develop competency in:, • AutoCAD, • Revit, • Navisworks, • Bluebeam, • RISA-3D, • Enercalc, • Serve as a senior technical resource for the Capitol Projects Group, • Provide guidance in specialized engineering applications such as vibration isolation, pipe stress, thermal analysis or seismic design., • Lead technical support for quoting activities with Sales and Branch PMs., • Manage engineering billing tasks, ensuring alignment with purchase orders and billing policies., • Support the training and development of new engineers and PMs., • Assist in improving engineering workflows, tools, and methodologies., • Representing ISAT in technical discussions with clients, inspectors, and AHJs., • Demonstrate strong knowledge of:, • IBC, • ACI, • ASCE, • UFC, • Maintain deep understanding of ISAT products, assemblies, and applications., • Maintain and safeguard department equipment and devices., • Assist with onboarding, training, and procedure communication for engineering staff., • Strong communication, analytical, and technical problem-solving skills., • Ability to lead, mentor, and train engineering staff., • Able to manage multiple deadlines and work independently in a fast-paced environment., • Bachelor’s degree in engineering required., • Minimum 5+ years of relevant design engineering experience in non-structural seismic applications., • PE strongly preferred. Further Qualifications – The successful candidate must pass a background check. *Equal Employment Opportunity

Job DescriptionMatrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at and True-Environmental.com to discover the full scope of our capabilities. Matrix New World is currently seeking a Senior Marine Structural Project Manager for the New York/New Jersey metro area. Matrix is a growing full-service environmental services and engineering firm offering unmatched expertise in delivering some of the nation's most exciting and complex infrastructure, resiliency, and sustainability projects, including such projects as FiDi Coastal Resiliency, Battery Park City Authority Resiliency, and Bush Terminal Pier 6 Redevelopment. As a Senior Project Manager, you will be responsible for leading engineering staff, projects, and tasks in the marine and coastal engineering field. You will provide engineering, inspection and/or permitting leadership, coordinate with clients, contractors, and other stakeholders, and develop new business and project proposals. The successful candidate will have broad experience that encompasses a wide array of marine, coastal, and waterfront structural/geotechnical engineering projects. This will include inspection, design, rehabilitation, permitting, and/or construction oversight for bulkheads, piers, marine terminals, fendering and mooring systems, ferry landings, living shorelines, stone revetments, and other port-related infrastructure.What you'll do • Oversee project scope, schedule, budget and QA/QC process for marine and coastal projects., • Provide support on multiple and multi-discipline design projects, including analyzing and documenting critical design and permitting elements., • Supervise and mentor staff and is responsible for allocation of manpower., • Coordinate with clients, contractors, outside consultants, government agencies and company staff, including providing technical support/oversight to team members., • Develop new business and assist in the preparation of project proposals., • Serve as a technical expert for internal and external clients., • Participate in marketing and business development initiatives.Minimum Qualifications, • BS or MS in civil, structural, geotechnical, environmental or coastal engineering, • Professional Engineer (PE) license, • Excellent written and verbal communication skills, • Proficient in MS Office SuiteAll qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job DescriptionCompany Description SOCOTEC is a provider of niche consulting services within the architecture, engineering and construction industries focusing on high-performance buildings and specialty structures. Through an integrated, holistic approach, our professionals provide solutions for building envelope, energy efficiency, sustainability, code advisory and construction advisory projects. SOCOTEC’s combination of expertise, experience and methods are increasingly recognized as best-in-class fueling significant growth. SOCOTEC offers competitive salary and benefits, mentorship, training, and social activities. SOCOTEC is proud to announce that it has been officially certified as a Great Place to Work by the renowned global authority on workplace culture, Great Place to Work®. Job Description We are looking for a Senior Structural Engineer with 10+ years of design/field experience. The work will include field investigations, structural analysis and design, interaction with clients, and other design and construction professionals. The successful candidate will have the opportunity to work on a variety of challenging projects involving steel, concrete, timber and masonry, including new buildings, historical restoration and renovation of existing buildings. Produce structural engineering designs and modifications by identifying project objectives and issues; researching and developing structural engineering techniques and approaches; verifying and validating design and construction. RESPONSIBILITIES: • Completes feasibility studies by studying project concepts, objectives, priorities, and requirements; conducting site investigations; identifying and establishing performance standards; preparing construction documents and submittals., • Organizes structural engineering design project by identifying short-term and long-range issues; preparing timetables, cost estimates, and required resources., • Develops structural design plans by researching, analyzing, selecting, and applying structural engineering concepts, approaches, techniques, and criteria; adapting and modifying structural mechanics options; developing and evaluating new structural architectures and algorithms; performing design calculations relating to foundations and structures, loading, structural response, and connection design; preparing drawings and visualizations; collaborating with related engineering design teams; evaluating structural materials and suppliers; identifying and resolving design integration issues; determining and establishing design specifications and safety standards., • Verifies and supports construction by performing compliance inspections and tests; resolving construction problems related to structural design; coordinating and conferring with construction and production contractors., • Documents structural design and maintenance by recording design features and maintenance requirements, and warnings; detailing safety requirements., • Complies with codes and regulations by applying and enforcing adherence to regulations and testing requirements; advising management on needed actions., • Maintains engineering design team accomplishments by coordinating actions; obtaining expert input; reviewing open issues and action items; contributing information and structural engineering analysis to team meetings and reports; guiding structural engineering technicians., • Prepares reports by collecting, analyzing, and summarizing structural engineering data and trends., • Direct contractors and testing companies during investigative test phase(s)., • Determine appropriate solutions within budgetary constraints., • Develop comprehensive plans, details and specifications for bidding (understanding of MA Public Bidding Laws desirable, but not required)., • Oversee bidding process (both public and private)., • Construction administration, including field/ site visits and ability to solve problems that may arise during construction., • Project Manager responsibilities include monthly billing review, approval/ disapproval of vendor invoices, budget, schedule, resource and job cost monitoring., • Work in conjunction with other Project Managers and staff to assist with unique structural-related issues., • Oversee and direct production by working with the administrative and drafting staff., • Perform all other duties as assigned by your supervisor or manager.Qualifications Minimum BS in Civil/Structural Engineering and professional registration required. MS preferred. Experienced with AutoCAD and computer aided analysis/design of structures is required and experience with BIM software a plus. Strong Oral and written communication skills also required. Site Development, Quality Engineering, Drafting Tools, Analytical Tools, Cost Estimating, Conceptual Skills, General Math Skills, Verbal Communication, Presentation Skills, Problem Solving. Additional Information For more information, please visit Job Type: Full-time Salary: $140,000-$175,000 Your information will be kept confidential according to EEO guidelines. IND123 SOCOTEC is an Equal Opportunity Employer.

Job Description Job Title: Structural Engineer (Entry Level) Location: New York, NY Work Schedule: Normal business hour Monday to Friday Duration: 12 Months Job Type: Contract to Hire Pay Rate: $40 to $50 per hour Job Description We are seeking talented Senior Structural Engineers for our New York Offices. The applicant should have a bachelor's or master's degree in civil or structural engineering and the ability to obtain a PE license. The candidate will work under the direction of Our Partners and Project Managers in engineering design, structural analysis, and construction administration for a new reinforced concrete building, with portions structural steel. Knowledge of Finite Element Analysis and Nonlinear Analysis of Structures using SAP2000, ETABS, RAM Structural SAFE software, also AutoCAD, Revit, and parametric analysis software Grasshopper are a plus. This position is full-time and will be in-person in the office five days per week. Roles & Responsibilities Senior Structural Engineer responsibilities include: • Design and analyze structural systems for a new building project., • Collaborate with architects, contractors, and other engineers to develop project designs., • Assist in project management tasks such as coordination of internal and external comments and to-do items., • Prepare detailed structural drawings and reports using software like AutoCAD and Revit., • Review construction plans for accuracy and adherence to specifications., • Ensure projects comply with local building codes and regulations., • During the construction phase, assist with review of submittals and RFI's., • Bachelor's or master's degree from an accredited engineering program The ideal candidate should have a strong understanding of structural analysis and design principles, along with proficiency in AutoCAD, Revit, or other relevant engineering software. Excellent communication skills and the ability to collaborate across disciplines are essential. The role requires problem-solving skills, especially under pressure, along with strong project management abilities. A thorough knowledge of building codes, and industry standards is critical for ensuring that all projects meet or exceed expectations..

Job Description Senior Geotechnical/Structural Engineer Location: New York, NY (Fashion District) Employment Type: Full-time We are recruiting on purpose for an experienced Senior Geotechnical/Structural Engineer to join our growing team in New York City. This is a high-impact role for a motivated professional eager to lead complex engineering efforts that range from investigation and design to rehabilitation and forensic analysis. You’ll work on diverse infrastructure and structural projects, applying your expertise in both geotechnical and structural engineering to deliver resilient, safe, and efficient solutions. Key Responsibilities As a senior technical leader, your responsibilities will include: • Geotechnical – GEOSLOPE, Slide, Plaxis, LPILE, Settle3D, DeepEX, CIVILTech, • Structural – ETABS, SAP2000, RISA, • Work on challenging, multidisciplinary projects that make a real-world impact, • Be part of a collaborative, mission-driven team, • Grow professionally through mentorship, training, and visibility in the industry, • Flexible, supportive culture with opportunities to lead Ready to build what matters? Apply today and help shape the built environment with innovative, high-integrity engineering. Would you like a version tailored for LinkedIn or Indeed, or formatted as a PDF brochure for outreach campaigns?

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Senior Electrical Engineer (PE) with an opportunity to experience a varied array of projects which include large infrastructure, ground, underground, rail, and transit projects throughout the New York Area. This individual will function as a senior level Electrical Engineer on projects, responsible for all aspects of electrical design, ranging from: field survey, calculations, computer aided drafting (CAD), equipment selection, coordination with trades, maintaining client standards and relations, and other fundamentals of engineering. Responsibilities • Lead and oversee the electrical design of Infrastructure, transportation, and commercial projects., • Applies knowledge of industry standards and electrical engineering design principles, • Applies knowledge of electrical power design in support of a range of projects, • Applies knowledge of one-line drawings, elementaries, and wiring diagrams, equipment specifications (including transformers, MCC, switchgear, substation equipment), power plans, conduit plans, cable schedules, system studies and protective relay settings, • Applies knowledge of power systems ranging from 120V to 35kV distribution and transmission systems, • Evaluates, selects, specifies, and engineers all electrical engineered systems or products for a project, • Engages in the development of a design through sketches, electronic models, diagrams, and other visual formats, • Utilizes technologies in development of three-dimensional models of electrical systems and provides markups for junior engineers, • Prepares and revises documentation in various electrical phases including site plans, floor plans, diagrams, and details, • Participates in project coordination meetings with internal team members and/or external consultants, owner and contractor, subcontractors, and vendors, • Participates in client project requirement meetings, value analysis, and basic cost estimating, • Participates in the full project cycle, planning phase through construction close-out, • Aids in the development of the project scope, budget, staffing, and schedule, • Prepares and coordinates development the project specifications with construction documents, • Participates in quality assurance and quality control on own projects and projects of peers, • Assists in the development of new standards and specifications for the electrical group, • Assists with the development of proposal for smaller, less complex projects, • Oversees and manages multiple projects, • Participates in constructability review, • Leads one or more teams through all phases of project document production, • Checks the work of others for accuracy and completeness and manages time to meet project budget and schedule, • Participates and collaborates in project team setting and to engage in creative and critical thought, • Visits project sites, record construction progress and existing conditions, attend testing events, • Applies codes and standards which regulate and guide the industry, • Uses AutoCAD, Revit, MicroStation, and Microsoft Word to assemble contract documents, • Stamp and seal electrical drawings and documentation as the responsible engineer of record. Qualifications • Bachelor’s degree in Electrical Engineering, • Licensed Professional Engineer (PE) required. NY PE is preferred, • Minimum of 7 years of experience in electrical engineering and design, • Must have NY/NJ relevant experience, • Transportation and/or infrastructure experience is preferred, • Excellent written and verbal communication skills, and presentation abilities in internal project settings with senior management team, external project stakeholders including senior client management leadership, • Excellent interpersonal skills and staff supervision, • Requisite knowledge, interpretation, and application of National Electrical Code and applicable energy codes, • Strong understanding of all phases of project document production and the relationship between drawings and specifications, • Exceptional knowledge of electrical systems, means, methods, materials, and industry standards BenefitsNaik offers a competitive compensation package including: • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job Description Job Title: ERP Modernization Architect – VB to C# Conversion Position Location: Summit, NJ / Hybrid Reports To: Senior VP - IT Company Summary Sugar Foods LLC is a privately owned company with production facilities in Georgia, Massachusetts, California, and Mexico. Our products are sold and distributed throughout the U.S. and Canada. Sugar Foods manufactures and packages croutons, tortilla chips, crispy toppings, caramels, and chocolate syrups, as well as cheese-based toppings. Additionally, Sugar Foods packages a variety of items including sugar, sweeteners, powdered creamer, breadings, and coaters, and dried fruits and nuts. The Sugar Foods Way At Sugar Foods, the Customer is King, and our team is our Family. The vision of Sugar Foods is for our products to be on every plate and in every cup. We continue to grow our business and adapt to changing business conditions to consistently provide value to our customers, our associates, and our community, by adhering to high standards of quality and safety and always acting in a respectful and responsible manner. Position Overview We are seeking a highly skilled and business-minded ERP Modernization Architect to join a collaborative team tasked with reengineering our core, home-grown Order-to-Cash ERP system. Developed and refined over the past 30 years in Visual Basic 6, this mission-critical platform is being rewritten in C# to support long-term scalability and modernization. This role requires an individual who excels in architectural thinking, hands-on coding, and process understanding. You'll work closely with business leaders and legacy system experts to translate complex, custom logic into modern, maintainable C# code, while identifying and implementing opportunities to improve business workflows along the way. Key Responsibilities • Serve as the technical architect for the VB6-to-C# modernization effort, helping define structural approaches to code refactoring and system design., • Analyze legacy Visual Basic 6 code to extract, understand, and document business logic and system behavior., • Collaboratively re-implement this logic in C#, using best practices for performance, maintainability, and extensibility., • Work with IT and business stakeholders to validate business process fidelity and recommend enhancements when applicable., • Mentor developers on the team and ensure technical consistency and code quality across the modernization effort., • Contribute to system testing, performance tuning, and release planning. Required Technical Skills • Expert proficiency in C# and deep working knowledge of Visual Basic 6., • Proven experience designing and modernizing monolithic ERP or custom enterprise systems., • Strong knowledge of .NET Framework/.NET Core, object-oriented design, and service-oriented architecture., • Proficient with SQL Server, including writing and optimizing stored procedures and database structures., • Working knowledge of integrating Order-to-Cash systems with external systems in the ERP ecosystem, particularly:, • QAD for MRP/DRP (Material and Distribution Requirements Planning) functions., • Oracle Transportation Management (TMS) for outbound logistics and freight execution., • Ability to design or refactor interfaces between internal applications and external ERP modules (via APIs, flat files, or EDI)., • Familiarity with enterprise messaging patterns and system interoperability best practice., • Demonstrated ability to understand and reverse-engineer complex business logic embedded in legacy code., • Ability to collaborate with domain experts to ensure functional accuracy and continuity., • Strong communication and documentation skills — able to bridge the gap between technical implementation and business needs., • Comfortable working in a hybrid environment that blends remote development with on-site collaboration. Preferred Qualifications • Prior experience modernizing custom ERP or Order-to-Cash systems., • Experience in business process analysis, especially in inventory, order management, or finance workflows., • Background in mentoring or technical leadership within cross-functional project teams. Why Join Us This is a rare opportunity to influence the future of a mission-critical ERP platform while preserving the best of its legacy. You’ll work side-by-side with individuals who built the original system and bring decades of institutional knowledge, creating an ideal environment for deep learning, thoughtful innovation, and lasting impact. Sugar Foods is an Equal Opportunity Employer. The policy of Sugar Foods Corporation is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's race, color, gender, age, national origin, religion, citizenship status, marital status, sexual orientation, gender identity, transgender status, physical or mental disability, protected veteran status, genetic information, pregnancy, or any other categories protected by applicable federal, state or local laws. U.S. Employment: If you have any difficulty using our on-line system, you may use the alternative method described below to contact someone about your interest in employment at Sugar Foods Corporation. Please reference this statement and job reference you are applying for when contacting us. Tel: 678-952-7051. Sugar Foods Corporation is an E-Verify Company and provides reasonable accommodation for qualified individuals with disabilities and disabled veterans in job applicant procedures. "Equal Opportunity Employer: Minority/Female/Veteran/Disabled/Gender Identity/Sexual Orientation"

Job Description Project Manager, Structural Engineer New York City, NY | Hybrid | Full-Time About Us Shape the iconic skyline of New York! Join HLZAE, a wholly owned subsidiary of Milrose Consultants. We build more than buildings—we build confidence in compliance, restoration, and renewal. As a trusted leader in architecture, building envelope consulting, and façade restoration, we partner with clients to preserve and enhance New York City’s iconic skyline. Our team brings deep technical expertise and a commitment to excellence across every phase of design, inspection, and construction administration. Position Overview We are looking for a Project Manager to join our Structural Engineering team. In this role, you will support and lead a variety of structural and architectural projects, contributing to the design, analysis, repair, and restoration of buildings across New York City. You will collaborate closely with senior engineers, architects, project managers, contractors, and clients to deliver sound structural solutions. As a Project Manager you will manage multiple projects and have overall project management responsibility, including client relationships, scheduling, budgeting, and profitability for a variety of projects. What You’ll Do • Lead and support projects on existing buildings including structural repairs, façade restoration, historic preservation, forensic investigations, and interior alterations., • Serve as an in-house structural consultant to architects and mechanical engineers, providing guidance on issues such as deterioration, façade anchorage, and roof dunnage design, etc.)., • Perform structural analysis and develop repair details for steel, concrete, masonry, cast iron, and wood structures, ensuring compliance with building codes and regulatory requirements., • Prepare, review, and coordinate project documentation including drawings (AutoCAD), specifications, technical reports, and correspondence., • Participate in all project phases: investigation, scoping, design, bidding, filing, construction administration, and closeout – while enforcing quality control and troubleshooting project challenges., • Conduct site inspections using supported and suspended scaffolding and lifts (25–50% field work) and collaborate closely with clients and contractors to support, educate, and ensure successful project outcomes. What You’ll Bring Required: • Bachelor’s degree in Civil Engineering (structural focus/concentration preferred)., • Engineer-in-Training (EIT) certification required., • 5+ years of work experience in structural engineering., • Knowledge and experience of NYC building codes., • Must be comfortable working at heights and from suspended scaffold rigs., • Proficiency in AutoCAD and structural analysis tools., • Exceptionally organized and skilled at balancing multiple projects and deadlines., • Effective communication, documentation, and collaboration skills. Preferred: • NY State PE license., • Experience with existing buildings, historic construction, and historic preservation., • Familiarity with façade restoration, parking structures repairs and forensic investigations., • Willingness to obtain any other required certifications. Work Environment & Schedule • This position is based in New York City, with a hybrid work schedule., • Standard working hours are Monday–Friday, 8AM – 5PM (Flexible)., • Travel requirements: moderate field work mostly within Manhattan, Brooklyn, Bronx, and Queens (25–50%). Compensation & Benefits • Salary range: $95,000 – $110,000 based on knowledge, skills, and experience., • Comprehensive health, dental, and vision insurance, and 401K plan with match., • Paid time off: Holiday, vacation, sick, personal, and birthday., • Career development and growth opportunities. HLZAE, Inc., a wholly owned subsidiary of Milrose Consultants, LLC, is an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by law. HLZAE, Inc., a wholly owned subsidiary of Milrose Consultants, LLC, is committed to providing reasonable accommodation for qualified individuals with disabilities. If you need assistance or an accommodation due to a disability, please contact us at . Notice to third party agencies: Please refrain from calling or emailing our team directly. Our in-house Talent Acquisition team manages all recruiting operations, including the selection and management of all external suppliers.

Job Description Bala Consulting Engineers is a 200-person engineering firm headquartered in Wayne, PA with full-service offices in New York, NY, Boston, MA, Baltimore, MD, and Arlington, VA. BALA is a dynamic growth-oriented company, built on relationships with our clients, staff, and industry partners. At BALA you will enjoy an exceptional employee experience that results in a successful career based on collaboration, leadership and personal development. BALA Structures Group is seeking a motivated structural engineer with 10 years of experience for the New York office. Strong interpersonal skills for developing client relationships is a must. We are looking at qualified applicants with diverse backgrounds to help continue to grow the Structures group at Bala. This role will work in a multitude of services within structural engineering including, but not limited to: • Design and serve as, or work with, the structural E.O.R. for building designs of new construction, renovations and additions., • Provide consultations to clients and prospective clients for structural work., • Support BALA’s MEP departments on infrastructure and fit-out projects., • Adapt to the varieties of business sectors such as commercial, residential, industrial, institutional and retail., • Structural Engineering, or Civil Degree with structural emphasis, from an accredited institution., • Registered EIT with a focus on Structural Engineering; Registered PE preferred, • 10+ years experience in structural design of buildings, • Creative problem-solving skills, • Capable of working individually, and in a team environment., • Ability to thrive in collaborative work situations., • A drive for thorough research, and multi-disciplinary curiosities. Bala offers comprehensive benefits: • Medical, Dental, and Vision insurance package, • 401(k) with employer match, • Employer Paid Life Insurance, • Up to (5) weeks of PTO based on years of experience and (8) paid holidays, • 8 hours of Volunteer Time Off, • Tuition and Licensure Reimbursement, • Federal Student Loan Assistance including match up to $5,250 per year, • Section 529 Plan (College Saving Plan), • Employee Referral Program Agencies must obtain advance written approval from Bala Consulting Engineer’s HR/Recruiting Department to submit resumes. This approval must be in the form of a valid fully executed contract for service as well as a request to submit candidates to a specific job opening. Bala Consulting Engineers will not pay a fee to any Agency that does not have such agreement in place, or for positions for which candidates have not been specifically requested. #LI-Onsite

Job Description Savin Engineers is seeking Structural Design Engineer for Westchester, Pleasantville office. Great opportunity to join dynamic team. Senior Structural Design Engineer Building upon a solid foundation of successful water, wastewater, and landfill projects since 1988, Savin Engineers, PC has a proven team of leaders that have expanded our reach into new markets throughout the Northeast Region and continues to push throughout the States and internationally. Our team of professionals strives to meet the needs of ever changing regulatory requirements and ensure the quality of life for the public we serve. Savin is seeking an experienced Structural Design Engineer. Structural Design Engineer Responsibilities: • Leading the effort in the development of structural drawings and specifications, • Coordination between disciplines, • Attendance at internal meetings, • Preparation of calculations for renovations and new construction, • Review of shop drawings as well as other design services during construction Structural Design Engineer Primary Design Areas: • Structural analysis and design of reinforced concrete, structural steel, masonry, and specialty structures, as well as pipe and civil engineering design (wastewater, sewers, etc). Structural Design Engineer Requirements: • BS Civil Engineering, with an emphasis on structural engineering., • Understanding of Building Codes and various design codes and references;, • Knowledge of construction drawing standards;, • Excellent communication and writing skills who can handle simple to complex projects across a varied staff;, • Attention to detail and highly organized;, • Self-starter, able to work independently and able to multi-task while achieving deadlines. Savin Engineers, P.C. is an equal opportunity employer. Savin employees enjoy a comprehensive benefits package that includes multiple health care options and retirement benefits, as well as management-supported opportunities for professional growth and development. Salary is based on level of experience. Company DescriptionSavin Engineers, P.C. is a well-established, mid-size engineering firm headquartered in Westchester County, NY with offices in Pleasantville, NY, Rochester, NY, Bridgewater, NJ and Washington DC. Savin Engineers is always looking for talented and motivated individuals to join our team. We are a growing and vibrant multi-disciplined engineering consulting firm with six divisions united under one roof. Our MEP Division (high performance, low energy solutions) is reinforced by our Transportation Division (roads, tunnels, bridges, railways and airports), our Structural Division (structural solutions and structures of dependable performance); our Environmental Division (systems to safeguard our water), our Field Services Division (technology to detect subterranean system failures), and our Educational (turnkey assistance from concept to close out) and Facilities Management (infrastructure and building operation analysis) Division. We offer exciting opportunities to build careers in any of our multiple office locations. Whether it’s planning, design, field inspection or construction administration – any area of the company you may be involved in is staffed with a diverse group of highly-educated, qualified mentors working on a wide range of interesting assignments. We offer a competitive benefit and compensation package. Savin Engineers is an Equal Opportunity EmployerSavin Engineers, P.C. is a well-established, mid-size engineering firm headquartered in Westchester County, NY with offices in Pleasantville, NY, Rochester, NY, Bridgewater, NJ and Washington DC. Savin Engineers is always looking for talented and motivated individuals to join our team. We are a growing and vibrant multi-disciplined engineering consulting firm with six divisions united under one roof. Our MEP Division (high performance, low energy solutions) is reinforced by our Transportation Division (roads, tunnels, bridges, railways and airports), our Structural Division (structural solutions and structures of dependable performance); our Environmental Division (systems to safeguard our water), our Field Services Division (technology to detect subterranean system failures), and our Educational (turnkey assistance from concept to close out) and Facilities Management (infrastructure and building operation analysis) Division. We offer exciting opportunities to build careers in any of our multiple office locations. Whether it’s planning, design, field inspection or construction administration – any area of the company you may be involved in is staffed with a diverse group of highly-educated, qualified mentors working on a wide range of interesting assignments.\r\n\r\nWe offer a competitive benefit and compensation package. \r\nSavin Engineers is an Equal Opportunity Employer

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Senior Civil Engineer with an emphasis in highway and roadway design. The successful candidate will be supporting our Civil/Highway Design Services group located in the Edison, NJ office. The work will employ fundamental principles including surveying, trigonometry, geometrics, fluid mechanics, utility coordination (including relocation and agreements), hydrology and hydraulics, cost estimating, and transportation engineering while using applicable software. The candidate will be involved in and complete all phases of infrastructure project development. The candidate will report directly to the Director of Civil/Highway Design Services Responsibilities • Lead the design and development of roadway, highway, and transportation projects in accordance with federal, state, and local standards (e.g., AASHTO, DOT, FHWA)., • Prepare and review plans, specifications, cost estimates, and technical reports., • Oversee and mentor junior engineers and design staff throughout project lifecycle., • Coordinate with clients, agencies, contractors, and multidisciplinary teams to ensure successful project delivery., • Manage project budgets, schedules, and scopes, ensuring adherence to quality and safety standards., • Conduct site visits and provide construction support services as needed., • Stay current on industry trends, codes, and innovative design technologies. Qualifications • A Bachelors Degree in Civil Engineering is required; Masters Degree is preferred., • 7+ years of experience in civil engineering with an emphasis in highway and roadway design projects, • Professional Engineer License (NY or NJ) is required, • Proficiency in CADD (Microstation and InRoads and AutoCAD Civil 3D), AutoTURN, Microsoft Office (i.e. Word, PowerPoint, Excel and Outlook) along with various other civil design applications, • Experience in the production of plans, specifications, and engineer’s estimates for roadway projects for NJDOT, NJTA, PANYNJ, and County or Municipal agencies, • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job DescriptionJob Description Hours: Full-Time 35 Hours Work Location: 30-30 Thomson Avenue, LIC, NY 11101 Candidates who are permanent in the Administrative Construction Project Manager title or those who are reachable on the promotional exam#3523 or filed for open-competitive exam #3039 are strongly encouraged to apply. Please include a copy of your Notice of Results or indicate on your resume and cover letter if you are already permanent in the title. The NYC Department of Design and Construction, Division of Public Buildings, seeks an Associate Commissioner. The selected candidate will provide leadership to the division’s capital portfolio and program units, and will be responsible for planning, directing, and coordinating every aspect of the division’s architectural/building portfolio, controlling projects from initial concept, through scope development, to building completion and contract closeout while ensuring high quality, efficient, functional designs, and adhering to defined construction standards and codes. The Associate Commissioner will develop the portfolio in line with sponsor needs, building usage and environmental impact. This includes accountability for the division’s capital construction project portfolio, valued in excess of $6 billion; supervising 150 engineers, architects, and construction professionals; acting as a liaison to the division’s senior management; and interacting with other agencies, community boards, and elected officials. The candidate will utilize technical best practices and standards; meet with sponsors and technical delivery/management teams; guide the delivery of cost-effective, high-performance projects; and translate the division’s objectives into relevant and tangible goals. Additional responsibilities include: monitoring the division's project delivery for alignment of scope, scheduling and budgeting; reviewing annual sponsor portfolio reports; overseeing systems and process enhancements; analyzing workload and workflow across the division; ensuring efficient distribution of resources; and participating in citywide initiatives and programs. Authorization to work in the United States is required for this position. NYC Department of Design and Construction does not provide sponsorship for international employees for visa applications, extensions, or status changes, including STEM/OPT visas. Applicants are responsible for ensuring that they meet all qualifying requirements for this position, at the time of application. All applicants, including City Employees: Please go to NYC Government Jobs | Explore Careers | City of New York, go to Search for Open Jobs, and type in the Job ID # listed above. Submit job application as prompted. Do not apply via Employee Self-Service (ESS), e-mail, mail, or fax your resume to DDC directly. ADMINISTRATIVE CONSTRUCTION PR - 82991 Qualifications At least six years of full-time satisfactory experience in construction management work on capital projects, each one of which must have had a dollar value of at least $300,000, at least eighteen months of which must have been in a managerial or consultative capacity in an organization responsible for the management of construction; and a combination of the following, sufficient to equal a total of ten years of education and experience: 1. Full-time satisfactory experience in construction inspection on capital projects, each one of which must have had a dollar value of at least $300,000. One year of acceptable experience will be credited for each year of construction inspection experience up to a maximum of four years., 2. Full-time satisfactory experience in building construction as a journeyperson in one or more of the skilled building construction trades. One year of acceptable experience will be credited for each year of journeyperson experience up to a maximum of four years., 3. Education in an accredited college or university leading to a bachelor's degree in architecture, landscape architecture, or air pollution control, chemical, civil including structural and bridge design, electrical, mechanical, or sanitary engineering will be credited on the basis of 30 semester credits for one year of acceptable experience up to a maximum of four years., 4. A New York State license as a professional engineer or registered architect or a license as a professional engineer or registered architect from a state that has reciprocity with New York State may be substituted for the four years of education and experience described in "1", "2" and "3" above. However, all candidates must have at least six years of experience in construction management work described above, including at least eighteen months in a managerial or consultative capacity in an organization responsible for the management of construction. License Requirements Possession of a Motor Vehicle Driver License valid in the State of New York. Employees must maintain the license during their employment. Additional Information The City of New York is an inclusive equal opportunity employer committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, veteran status, gender identity, or pregnancy.

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Senior Resident Engineer. Naik is a New York-New Jersey engineering services firm which specializes in engineering design, field inspection, and Project Management/Construction Management, primarily in the transportation infrastructure industry. Responsibilities • Manage design, construction, and delivery of environmental projects in accordance with client procedures and guidelines, • Recommend construction sequencing, means, and methods in a railroad operating environment, • Oversee client Force Account and third-party contractor work; integrate schedules with track outages and foul time, • Perform field inspections and daily monitoring to ensure compliance with contract documents, approved work plans, shop drawings, safety and quality plans, and client procedures, • Validate and monitor contractor and Force Account invoices based on work progress, • Prepare Initial and Updated Baseline Documents, technical scopes of work, and regulatory correspondence, • Schedule, lead, and document progress meetings with contractors, designers, and regulatory agencies, • Review design documents and shop drawings; coordinate reviews with client Engineering, Corporate Safety, and internal stakeholders, • Resolve field issues and unforeseen conditions in coordination with the Project Manager, • Review cost estimates, contractor proposals, and participate in change order negotiations, • Bachelor’s degree in Engineering, Geology, Environmental Science, or related field, • 5–10 years of experience managing environmental design and construction projects, • Hands-on experience with:, • Soil remediation (organic and inorganic contaminants), • Air monitoring, • Waste handling plans, • Well installations, • Underground storage tank (UST) removals, • Remediation system installation, • Experience working in a railroad environment; knowledge of railroad engineering standards and specifications, • Direct regulatory agency coordination experience (EPA, NYSDEC, NYSDOH), • Experience developing technical scopes of work, • Experience managing project budgets and schedules, • Strong project management, communication, coordination, negotiation, and multitasking skills, • Knowledge of OSHA and construction/environmental remediation safety standards, • PE and/or CCM certification preferred (not required), • Roadway Worker Protection (RWP) training, • OSHA 10-Hour Construction Safety Training, • OSHA 40-Hour HAZWOPER with current 8-Hour refresher (maintained throughout contract), • Must be willing and able to travel throughout New York State as project needs dictate, • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job Description About CP Engineers With forty years of experience, CP Engineers delivers innovative solutions in site/civil, water/wastewater, municipal, MEP, and environmental engineering. Our project portfolio spans private, municipal, county, and regional clients—many of whom have partnered with us for decades. Remote work flexibility, competitive compensation and benefits, and a supportive culture have helped CP earn back-to-back Best Places to Work in NJ awards and driven strong employee retention. Position Overview CP is growing and we are seeking a Water Resources Design Engineer to join our Water Resources Practice. This senior technical role focuses on the design, feasibility, and compliance of water and wastewater treatment facilities, pumping stations, and distribution/collection systems. The successful candidate will ensure all work meets or exceeds current industry standards and regulatory requirements. Key Responsibilities • Design & Engineering: Plan and design water and wastewater treatment facilities, pumping stations, and distribution/collection systems in accordance with industry standards such as AWWA, ASCE, and NSF/ANSI, and in compliance with the Clean Water Act (CWA) and Safe Drinking Water Act (SDWA)., • Feasibility Studies: Conduct feasibility studies for water resources projects, integrating hydrologic, hydraulic, and environmental analyses per EPA and NJDEP guidelines., • Technical Documentation: Prepare engineering reports, technical specifications, and contract documents that conform to NJDEP regulations, NPDES permitting, and other applicable federal, state, and local requirements., • Site Inspections: Perform site inspections and assessments to support design and construction efforts, ensuring compliance with NJDEP, EPA, and local environmental standards., • Regulatory Compliance: Ensure all project activities comply with local, state, and federal environmental regulations, including NJDEP permitting processes (e.g., NJPDES, Freshwater Wetlands Protection Act)., • Sustainability & Best Practices: Incorporate energy and water efficiency measures, life cycle cost analysis, and sustainable design principles as recommended by EPA and national water resources planning guidelines., • Collaboration: Coordinate with multidisciplinary teams and support departments (Structural, Civil, MEP) to deliver integrated project solutions., • Mentorship: Mentor and train junior staff, sharing expertise in regulatory compliance, technical standards, and best practices. Join CP Engineers and help deliver water resources solutions that meet the highest standards of safety, quality, and regulatory compliance. Apply today! Requirements • Bachelor’s degree in Civil or Environmental Engineering or related field, • 10+ years of experience in water resources engineering, • Strong knowledge of NJDEP regulations, permitting processes, and relevant federal standards (EPA, CWA, SDWA), • Experience with AutoCAD and technical report writing, • Excellent analytical, problem-solving, and technical writing skills, • 401(k) match, • Hybrid/remote work flexibility, • Flexible hours, • 20 days paid time off, • Tuition, professional license, and association fee reimbursement, • Medical, dental, and vision coverage, • Support for employee work/life balance, • Training and development opportunities

Job Description Scope of Job PowerFlex, an EDF Renewables company, is a leading national provider of intelligent onsite energy solutions that support carbon-free electrification and transportation. The Company delivers integrated solar, storage, EV charging, and microgrid systems, to businesses and organizations. As a single full-service provider, PowerFlex customizes clean technology solutions to help clients achieve their energy and sustainability goals. Through the comprehensive PowerFlex X platform, PowerFlex leverages patented smart software to control, monitor, and optimize a client's distributed energy resources to reduce cost and maximize return on investment. Our technology was developed at Caltech, deployed with research partners like NASA, proven-out with customers like Netflix and Children’s Hospital, and now scaling to fleets, corporations, and municipalities nationwide. The Project Engineer Intern will be responsible for assisting the implementation of solar, storage, and EVSE infrastructure projects. They will be responsible for supporting project data management, engineering design sets, client/utility/contractor coordination, purchase orders, and project tracking. This individual will help the Project Engineer to coordinate all aspects of the project to ensure they are completed as quickly and as safely possible. The ideal candidate will be very detailed, organized, and able to manage time and priorities. Location and Schedule This hybrid role is based out of our New York City, NY office. The selected candidate will be expected to work in person 3 days per week. Applicants must be local to New York City or willing to relocate, though relocation expenses will not be covered by the company. This is a full-time summer internship lasting 12 weeks, from Monday, June 8th, to Friday, August 28th. The position requires a commitment of 40 hours per week, Monday through Friday. Responsibilities 95% - Junior Project Engineering • Support lead Project Engineer in all project-related endeavors, • Manage project data using applicable platforms (Procore, Salesforce, etc), • Coordinate with client and/or site contact to schedule on-site meetings, • Assist in equipment delivery schedules, • Request quotes from vendors, engineering partners, • Issue purchase orders, change orders Qualifications Education/Experience • Currently pursuing a bachelor’s degree (preferably rising or graduating Senior) in engineering, construction, sustainability or a related field, • Experience in CAD or other designing software, • Advanced computer skills (MS Office – Word, Excel, Outlook), • Professional, dependable, customer service oriented, • Ability to multi-task in in a fast-paced environment while prioritizing work activities and time efficiently, • Excellent communication, both written and verbal, • Detail oriented - demonstrates accuracy and thoroughness to ensure work quality, • Strong initiative and ability to problem solve, • Self-starter who can complete tasks and manage responsibilities with minimal supervision, • Understanding of electrical engineering and power systems Physical Requirements Remaining in a seated position. Long hours on computer keyboard. Prolonged periods of standing and/or walking. Working Conditions Approximately 90% of the time is spent in the office environment, utilizing computers (frequent use of MS Word, MS Excel, Outlook, Access, PowerPoint, Publisher and Adobe etc.), telephones, and general office equipment. Possibly 10% of the time is spent traveling to conferences or meetings or field traveling to project sites. Applicant Certification and Acknowledgment By submitting this application, you are certifying that all information provided is true and complete to the best of your knowledge. You understand that any false, misleading, or omitted information may disqualify you from consideration for employment or result in termination if already employed. You also release the company from any liability resulting from your failure to provide accurate information. DEI Statement Our company-wide approach to diversity, equity and inclusion is focused on our workplace, community and business outcomes. We believe Diversity, Equity & Inclusion (DEI) is a key component to our mission of delivering renewable solutions and leading the transition to a sustainable energy future. As such, we strive to become a workplace that is diverse, equitable, and inclusive. Our aspiration is to build a culture of belonging and accountability by creating opportunities for growth and continuous learning to ensure progress. EEO Statement PowerFlex is committed to building a diverse and inclusive workplace. We are a proud Equal Opportunity Employer and prohibit discrimination based on age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding, and related medical conditions), and sexual orientation. Privacy Notice to California Job Applicants For information on Privacy Notice to California Job Applicants, click here. Privacy Policy PowerFlex is committed to protecting the privacy of your personally identifiable information, for more information click here. Special Accommodation Language If you require assistance or accommodation while seeking employment with PowerFlex, please contact Human Resources at (209) 227-1511 or . Please note that these communication alternatives are for accommodation requests and not for general employment inquiries. Powered by JazzHR 3vCYkHLrU5

Job Description About the Firm We are a well-established, multidisciplinary engineering and planning firm with over 50 years of experience providing services throughout New Jersey and the surrounding region. The firm specializes in public-sector work and serves as Engineer of Record for numerous municipal clients, delivering infrastructure projects with long-term community impact. With a staff of over 100 professionals across civil, environmental, transportation, water/wastewater, structural, and planning disciplines, the firm offers technical depth, stability, and a collaborative work environment. Over the past five decades, the firm has supported projects with a total construction value exceeding $10 billion. Position Overview We are seeking a Civil Engineer with 2–5 years of experience to join our Wayne, NJ office. This role is ideal for a technically strong engineer with solid CAD skills who is interested in working on public-sector infrastructure projects and growing within a stable, reputable organization. Key Responsibilities • Prepare engineering drawings and construction documents using AutoCAD and/or AutoCAD Civil 3D, • Assist in the design of public-sector infrastructure projects, including roadways, drainage, utilities, and site improvements, • Support senior engineers with design calculations, plan development, and technical analysis, • Incorporate QA/QC, client, and agency comments into plan revisions, • Coordinate with in-house teams including survey, environmental, planning, and structural disciplines, • Bachelor's degree in Civil Engineering or a related discipline, • 2–5 years of relevant civil engineering experience, • Strong proficiency in AutoCAD; Civil 3D experience strongly preferred, • Experience with municipal or public works projects is a plus, • Familiarity with New Jersey standards preferred, • EIT certification or progress toward PE licensure, • Competitive compensation based on experience, • Comprehensive benefits package, • Long-term growth and career stability, • Exposure to a broad range of public-sector projects, • Supportive, team-oriented office environment

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay Stark Tech is seeking a Senior Project Engineer - Electrical who excels by transforming complex electrical requirements into safe, reliable, and integrated building infrastructure solutions. You lead projects from conceptual design through commissioning, using deep technical expertise, system analysis, and real-world constructability insight to ensure every electrical system is code-compliant, cost-effective, and optimized for long-term performance. You thrive at bridging design and field execution-coordinating seamlessly with mechanical, controls, and low-voltage teams to deliver fully integrated building solutions that support smarter, more efficient operations. Through technical leadership, cross-functional collaboration, and mentoring of engineering staff, you elevate project quality, reduce risk, and strengthen Stark Tech's reputation for delivering high-performing electrical infrastructure. What are we looking for • Associate degree required; Bachelor's degree preferred. Advanced degree a plus., • 10+ years of experience in electrical building infrastructure, power distribution, or energy/efficiency-driven electrical design., • Proven experience leading projects and managing engineering or cross-functional teams., • Expert knowledge of NEC, NFPA, IEEE, and local AHJ electrical requirements., • Strong understanding of service entrance design, switchgear, grounding, lighting, motor control, and distribution systems., • Experience performing power system studies (short circuit, arc-flash, coordination, voltage drop, load analysis)., • Skilled in producing Basis of Design documents, one-lines, riser diagrams, specifications, and construction documentation., • Ability to coordinate electrical designs with mechanical, structural, controls, and IT teams for fully integrated solutions., • Experience supporting commissioning, functional testing, performance verification, and owner turnover processes., • Proven ability to mentor junior engineers and influence cross-functional project teams., • Strong customer-facing communication skills. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay Stark Tech is seeking a Senior Project Engineer - Mechanical who excels by transforming mechanical system requirements into high-performance, energy-efficient, and fully integrated building solutions. You lead projects from conceptual design through construction support and commissioning, applying deep technical expertise in HVAC, hydronics, central plant systems, and air distribution to ensure every design is safe, code-compliant, and optimized for long-term reliability. You thrive at bridging early pre-construction solutioning with detailed engineering and field execution-collaborating across mechanical, electrical, structural, controls, and architectural teams to deliver systems that perform as designed in the real world. Through technical leadership, clear communication, and mentorship of engineering and design staff, you elevate project quality, improve constructability, reduce risk, and strengthen Stark Tech's reputation for delivering high-performance mechanical infrastructure. What are we looking for • Associate degree required; Bachelor's degree preferred. Advanced degree a plus., • 10+ years of experience in mechanical building systems or energy-driven infrastructure projects., • Proven experience leading projects and managing engineering or cross-functional teams., • Expertise in HVAC system design, load calculations, equipment selection, air and fluid distribution, and central plant systems., • Experience defining sequences of operation and integrating mechanical systems with BAS platforms., • Proven ability to conduct system retrofits, upgrades, and performance optimization analyses., • Thorough knowledge of applicable codes, safety standards, and environmental/regulatory considerations., • Skilled in creating Basis of Design documents, narratives, specifications, and construction documentation., • Experience coordinating mechanical designs with electrical, structural, controls, and architectural teams., • Proven ability to mentor junior engineers and influence cross-functional project teams., • Strong customer-facing communication skills. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Project Manager. Naik is a New York-New Jersey engineering services firm which specializes in engineering design, field inspection, and Project Management/Construction Management, primarily in the transportation infrastructure industry. Responsibilities • Provide the administration and coordination of activities for the design and construction of the more complex and/or highly visible construction and modernization projects under the guidance of a senior level client Project Officer, • Ensure the quality and high standards of performance and compliance in both design and construction by all consultants, vendors, etc., • Make decisions and take action in a timely manner to expedite the timely completion of the construction process, • Correct mistakes and errors in design and construction before they can be extensively incorporated into the project or as early in the construction process as possible, • Responsibilities are varied and include coordinative problem solving and managerial functions of these projects, • Make decisions on phasing and scheduling of projects, • Prepare and/or ensure preparation of schedules for planning, design and construction. Monitor schedules and take appropriate actions to ensure that project is completed on schedule and within approved cost limitations, • Provide ongoing interface with contractors, construction managers, local school personnel and Senior Project Officers on project issues; routinely interact with client senior managers on such matters, • Participate in the development and issuance of project procedures and policies; review and make recommendations on client-wide procedures and policies, • Provide guidance and advice to lower-level Project Officers, • Resolve issues and problems raised in field reports made by architects and construction management staff, • Use independent judgment to make on-site change order decisions and have the authority to negotiate with contractors and commit the client's resources on such change orders, • Review contractors claims or disputed work and advise senior management as to appropriate action. Compile contract and project documentation necessary for adjudicating or denying such claims, • Visit various job sites as required in the performance of the above duties, • Bachelor's Degree from an accredited college or university, • Five (5) years of full time, progressively responsible work as a technical specialist in one or more construction and design related fields; two (2) years must involve managing all phases of construction work on a scale and scope similar to the client, • A driver’s license valid in New York State, • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job DescriptionVoted one of Crain's Top 100 Places to work in NYC 14 different years, including 2025, RAND Engineering & Architecture, DPC is a 106-person Manhattan-based firm that designs, specifies, and administers restoration, upgrade, and adaptive re-use program on behalf of owners, managers, and co-op and condo boards. At RAND, we've built our reputation by treating clients and employees fairly, honestly, and professionally, and by performing our work with merit and distinction. As a result, we have attracted a diverse group of professionals with an abiding interest and expertise in their fields. While our goal is to continue to grow both as a company and as individuals, we are committed to keeping RAND a place where employees care about what they do and how they do it, in short, a firm they feel proud to work for. We are actively seeking a highly motivated Senior Mechanical Engineer to assist with project management of a variety of exciting projects. If you are interested in finding out more about this wonderful opportunity, please do not hesitate to reach out. See below for details. I look forward to connecting! Responsibilities include but are not limited to: • Perform work as a mechanical engineer in all aspects of project development, including client coordination, pre-design services, final design services, meetings, site visits, and project management., • Prepare written reports and studies, • Administer MEP upgrade projects, • Prepare renderings and supporting graphics for project presentations, • Participate in the contract bidding process, prepare and issue responses to contractor requests for information, and prepare and issue bulleting and change order documentation., • Develop design and technical solutions through all phases of a project, from feasibility to construction documentation, • Conduct site visits during the construction phase, • Design and specify HVAC, plumbing, electrical and fire protection systems, • Provide timely analytical solutions to evaluate mechanical configurations from a structural viewpoint, • Conduct verification/benchmarking of analytical results to test data/instrumentation, • Determine HVAC load, specs, sizing equipment, ductwork, and piping Job Requirements: • New York State PE license required, • 5+ years’ experience in New York City residential and commercial projects, particularly multi-family buildings, • Strong verbal and written communication skills, • Ability to produce and manage a project from programming through design and construction administration, in a team environment, • Experience with construction administration of projects, including shop drawings review, site visits and reports ne4UZBaasY

Job Description We are offering an exciting opportunity for a Senior Lead Structural Engineer to join our NYC team. With over 138 years of experience, H&H is a trusted full-service infrastructure engineering firm. Our clients, including infrastructure owners, contractors, and colleagues, rely on us for intricate and innovative engineering solutions. They trust our time-tested ability to manage the entire life cycle of a project, from the study and planning phase through to design and construction. With over 600 talented employees located across 30 offices nationwide, H&H can efficiently and effectively handle assignments of all sizes, types, and delivery methods around the country and across the globe. Responsibilities • Responsible for technical oversight of team(s) of varied level engineers in support of a project, • Prepare scope, schedule and budget for task assignments, • Routinely interacts with clients and stakeholders, • Works closely with other disciplines and on multi-discipline projects, • Implement quality control / quality assurance reviews of discipline, • Prepare detailed plans and construction documents for the assigned task, • Perform engineering calculations pertaining to and in support of the detailed plans and construction documents developed, • Develop contract specifications and contract bid documents, and technical report writing, • BS in Civil Engineering required; MS preferred, • PE License required (preferably in NY), • A minimum of ten years of Structural Engineering experience with a focus on bridge design preferred, • Participates in industry organizations/events (preferred), • Experience in conceptual, preliminary, and final design and plan production of bridge projects following Federal and State code, • Experience with load rating of regular and complex bridges, • Experience with bridge codes used in load ratings: AASHTO Manual for Bridge Evaluation, AASHTO LRFD Specifications and AASHTO Standard Specifications, • Experience with AREMA (preferred), • Ability to work effectively as part of a design team, • Experience with Finite Element Analysis software such as CSiBridge, Midas Civil, or Leap Suite of Design/Analysis Software Salary range–$130,000 – $190,000 annually. Salary commensurate with experience. We offer a professional work environment, competitive salary, benefits package, and 401(k). EOE M/F/ DISABILITY/VETS

Job Description Associate 3+ (Engineer for Building Envelope Group) Salary Range:$120,000.00 To $195,000.00 Annually About the job: We are seeking an intermediate to senior-level professional engineer to join our Building Envelope team in either Chicago or New York City. The ideal candidate has boundless curiosity (enjoys asking why things are done the way they are), a passion for delivering high-caliber work, and an enthusiasm for general building design. Energy and circularity will be transforming the way building envelopes are manufactured, designed, and constructed over the next decade.This is your opportunity to be a part of a team that will learn, teach, test, and deliver the next generation of building envelope designs, repairs, reuse, and investigative solutions. Key Responsibilities • Conduct thorough on-site inspections to assess damage, failures, or defects., • Collect and analyze data related to environmental, material fabrication, and construction practices., • Apply engineering first principles and analytical methods to determine root causes of building envelope problems, including the root causes of air infiltration, water infiltration, condensation, thermal radiation, and solar radiation., • Develop recommendations for the repair or retrofit of envelope structural components based on forensic findings., • Prepare detailed engineering reports documenting observations, analyses, findings, and recommendations as the lead or as part of a team when needed., • Support expert witness projects, as needed. Prepare and participate in depositions, as required., • Manage and oversee projects, ensuring deadlines and budget constraints are met., • Stay abreast of advancements in building envelope systems, energy codes, materials science, and forensic analysis., • Experience with terra cotta, brick, or stone masonry systems – or Experience with a variety of window wall, curtainwall, skylight, and storefront systems. Experience with both is an asset., • Explore markets in an area of your expertise and assist in business development activities toward meeting new technical peers and potential clients., • Proactively participate in professional development and thought leadership activities., • Education: Bachelor’s degree (BS) in Civil Engineering, Architectural Engineering, or Structural Engineering required; an Advanced degree (MS / PhD) is an asset., • Experience: 5-10+ years of project experience in building envelope design, repair, and investigation., • Licensure: Professional licensure is a requirement, either Professional Engineer (PE) in the State of New York or Structural Engineer (SE) in the State of Illinois (or the ability to attain one within six months of hire), with both licenses an asset., • Certifications (For NY candidates only): Qualified Exterior Wall Inspector (QEWI) designation from New York City Department of Buildings or ability to obtain QEWI within 6 months of start. Experience with NYC Local Law 11 Facade Inspection Safety Program., • Certifications (For IL candidates only): City of Chicago scaffold safety training certification or ability to obtain within 6 months of start., • Communication Skills: Excellent written and verbal communication skills. (Be willing to provide examples within the interview process), • Analytical Skills: Strong background in first principles of structural engineering and mechanics. Proficient with engineering tools for structural evaluation and analysis., • Project Management: Experience managing budgets and schedules, and leading projects., • Business Development: Experience with client engagement and presenting technical issues to Clients. Experience assisting with proposal writing. Physical and Travel Demands • Position may require some work to be completed in a field or laboratory environment, including work from heights or in confined spaces., • Enjoy up to 30% of the time in the field on assessments of building envelopes or structural system existing conditions., • Up to 20% travel may be required at times for this position. Who we are: We are CTLGroup, a team of engineers, architects, scientists, and consultants who are seasoned technical experts possessing unparalleled experience, knowledge, and testing proficiency in structures and materials. Our integrated team is backed by one of the most sophisticated commercial structural and building materials laboratories in the United States. Whether providing technical consultation, conducting laboratory studies, performing failure investigations, or offering expert testimony, we aim to solve our clients' problems and assist in achieving their objectives. Beyond delivering mere data, our team provides a foundation of confidence upon which our clients can build. *This job description describes the general nature of the position. The above declarations are not intended to be a complete list of responsibilities, skills and abilities required to do the job.CTLGroup provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionDescriptionJoin the APD Family – where passion meets purpose! APD is scouting for a Senior Structural Designer, ready to be the cornerstone of our burgeoning Structural Engineering Department. We're eager to meet you if you're on your journey toward professional licensure, with a burning passion for the art and science of structural building design! Successful applicants have the aptitude and passion for excelling in the structural field of building design by possessing proactive problem-solving, clear communication, and detailed coordination skills. Here at APD, we don't just value skills; we celebrate those passionate about their work. Elevate Your Career at APD Passionate Community: Be a part of the APD family, where every team member's passion fuels the collective purpose. Dynamic Growth: Thrive in a bustling Structural Engineering Department on an exciting growth trajectory. Diverse Portfolio: Dive into designing structural support systems for projects, with a special spotlight on retail design. Industry Leadership: Take pride in being part of a national front-runner in multi-site retail design. Autonomy & Support: Revel in a role that values your independent spirit, clear communication, and tech expertise. Career Momentum: Step into an expanding structural department and pave your path toward becoming a licensed PE. Key Responsibilities • Prepare structural construction drawings and supporting calculations for new and renovated buildings throughout the U.S., under the supervision of a licensed engineer., • Review shop drawings and structural submittals., • Coordinate with all design disciplines., • Contribute to project success, working under the direction of structural engineers, • Contribute to continually improving company standards, design tools, attitude, and success., • 4+ year’s of experience., • Bachelor’s degree in Civil Engineering from an ABET-accredited school., • Proficient in AutoCAD and/or Revit.Preferred Experience, • Passed the FE Exam with a plan to become a licensed Professional Engineer. We know it...what makes APD truly great is our people. And we appreciate them. We have a true team atmosphere, where we work to improve constantly. APD was formed with a new vision of the future – powerful professional design and consulting services without the often-associated large company corporate bureaucracy. Managing partners are always open to suggestions to improve the office environment and processes. We support our staff with training and mentoring. We are highly dedicated to our employees and invest in them from day one. We value happy employees – both personally and professionally. So around here, family comes first – we recognize that no one can give their best until their family is cared for. If you desire to grow, be challenged, and be rewarded for your efforts, we invite you to consider a career with us. APD offers a comprehensive benefits package, including health insurance, professional development, paid time off, 401(k), etc. APD Engineering & Architecture, PLLC is an Equal Opportunity Employer.

Job DescriptionDescriptionCME Associates is currently recruiting for a Program Manager to join their team of professionals in our Municipal Engineering Department. The Program Manager is responsible for overseeing multiple related projects within an organization and various clients to ensure they align with business objectives, are executed effectively, and deliver the expected value. The senior program manager will operate as a senior leader within the company supporting staff and project managers deliver high quality products for our clients. They will be responsible for running teams between 3 to 15+ people varying on scope and owning the relationship for a client while engaging in business development activities that generate new revenue. Responsibilities • Ensure that all projects within the program are aligned with strategic priorities i.e. profitability, revenue growth, and resource management., • Responsible for the development of project plans, timelines, and budgets for specific projects assigned to them with little to no supervision., • Facilitate communication between team members, stakeholders, and clients to ensure everyone is aligned with project objectives and timelines., • Monitor project portfolio to ensure objectives are being satisfied and provide timely advice to the Manager/Client on any anticipated delays affecting project commitments., • Owns the progress of projects, ensuring that tasks are completed on time and within budget and is responsible for escalating when project metrics are at risk., • Responsible for the relationships and health of good standing with clients., • Works with senior leadership to develop and guide business development activities for achieving growth targets in assigned areas and clients., • Assist in allocating resources effectively, ensuring that tasks are completed on time and within budget and communicating with leadership when required for additional resources., • Review of Site Plan and Subdivision applicants submitted to Municipal Land Use Boards and attend Municipal Planning Board, Zoning Board of Adjustment, and Council Meetings, when required by management or client., • Coordinate client needs and internal resources and teams to effectively uphold high quality delivery of projects to our clients., • Apply technical skills required to manage the project and client expectations, and to support the staff (e.g. storm water, hydraulics, grading, land use planning, structural analysis, survey, base mapping, etc.), • Consider health, safety and environmental requirements when developing civil designs., • Monitor and track project portfolio’s expenses to ensure that the project stays within the allocated budget., • Ensure that project milestones and deliverables are achieved on schedule and within scope/budget., • Regularly communicate project status, issues, risks, and changes to stakeholders and senior management., • Act as the primary point of contact for clients, ensuring their needs are met and concerns addressed promptly., • Lead, motivate, and mentor project teams, ensuring collaboration and high performance., • Oversee or manage staff to ensure quality control checks to ensure deliverables meet project specifications and client expectations., • Serve as the main point of contact for stakeholders, providing regular updates and addressing concerns., • Engage in CME activities as a senior leader, going above and beyond to ensure the future success of junior staff are set up for success. Qualifications • Bachelor’s degree in engineering, Environmental Science, Surveying, Construction Management, or related disciplines., • Professional Engineer (PE) or equivalent professional license required., • 10+ years of experience in design, construction, or equivalent experience., • 10+ years of experience managing and assisting in project management or client management., • Certified Municipal Engineer (CME), preferredPreferred Qualifications:, • Advanced proficiency in scheduling, resource allocation, and progress tracking., • Proficiency in creating advanced Gantt charts, reporting dashboards, and resource management., • Organizing workflows and visualizing project tasks, particularly for smaller or less complex projects., • Knowledge of cost estimation techniques and software., • Entry level understanding KPIs (Key Performance Indicators) for tracking project progress., • Basic knowledge of AutoCAD or MicroStation if for managing design aspects of engineering projects., • Familiarity with software for managing quality audits and compliance., • Proficiency with Microsoft Teams for team communication and updates., • Experience with SharePoint Adobe or similar platforms to manage project documents, blueprints, and specifications., • Basic knowledge of contract law and understanding of contract management tools for reviewing and preparing contracts and monitoring deliverables., • Knowledge of safety regulations as OSHA., • Ability to create proposals, technical reports, specifications, and other project documentation in an organized and professional manner. BenefitsCME offers a competitive compensation package including: medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off.

Job Description We are offering an exciting opportunity for a Senior Structural Engineer in our New York City office. With over 138 years of experience, H&H is a trusted full-service infrastructure engineering firm. Our clients, including infrastructure owners, contractors, and colleagues, rely on us for intricate and innovative engineering solutions. They trust our time-tested ability to manage the entire life cycle of a project, from the study and planning phase through to design and construction. With over 600 talented employees located across 30 offices nationwide, H&H can efficiently and effectively handle assignments of all sizes, types, and delivery methods around the country and across the globe. Responsibilities • Provide technical guidance to less experienced engineering project team members, • Work closely with other disciplines and on multi-discipline projects, • Assist in interaction with clients and stakeholders, • Perform quality control reviews of discipline - specific engineering project elements/deliverables, • Assist with coordination and planning of schedules, hours, and distribution of work within discipline, • Prepare detailed plans and construction documents for the assigned task, • Perform engineering calculations pertaining to and in support of the detailed plans and construction documents developed, • Develop contract specifications and contract bid documents, and technical report writing, • BS in Civil Engineering required; MS preferred, • PE License required (preferably in NY), • A minimum of six years of Structural Engineering experience with a focus on bridge design preferred, • Experience in conceptual, preliminary, and final design and plan production of bridge projects following Federal and State code, • Experience with load rating of regular and complex bridges (preferred), • Experience with bridge codes used in load ratings: AASHTO Manual for Bridge Evaluation, AASHTO LRFD Specifications and AASHTO Standard Specifications, • Experience with AREMA (preferred), • Ability to work effectively as part of a design team, • Experience in MicroStation and/or AutoCAD, • Experience with Finite Element Analysis software such as CSiBridge, Midas Civil, or Leap Suite of Software (Steel, Concrete) (preferred) Salary range–$100,000 – $160,000 annually. Salary commensurate with experience. We offer a professional work environment, competitive salary, benefits package, and 401(k). EOE M/F/ DISABILITY/VETS

Job Description Snipebridge, a strategic talent solutions company specializing in connecting exceptional talent to great career opportunities in the Architecture & Planning industry, is seeking a Supervising Engineer -Water Resources. Our client is an ENR Top 500 Design firm focused on geotechnical, environmental, water, ecological, and construction management services that has been delivering exceptional services for more than six decades. Their multidisciplinary team tackles intricate projects in diverse industries such as transportation, energy, infrastructure, and development. The firms long-standing commitment to technical excellence and client satisfaction has fueled their growth and success. They offer a collaborative and dynamic work environment where talented individuals can thrive and contribute to impactful projects. Position Summary This key position demands strong client-facing skills alongside the ability to lead and mentor staff-level engineers. A critical aspect of the role involves partnering with the firms dams/levees/water resources Practice Leaders to actively develop and expand our market footprint within New Jersey, New York, and Pennsylvania. Primary Responsibilities: • Supervising and scheduling geotechnical and structural engineering staff and providing technical direction and oversight., • Senior project management of interdisciplinary teams of geotechnical, structural, hydrologic/hydraulic, and civil engineers; to include, scheduling and supervising project meetings, producing and managing project schedules and budgets., • Managing and reviewing the preparation of construction plans and technical specifications., • Supervising and reviewing dam and/or levee safety inspections., • Providing leadership/mentoring to technical staff., • Managing and tracking budgets, creating project invoicing and Client follow-up, • Communicating effectively and efficiently with team members, clients and contractors., • Interacting with clients and regulatory agencies., • Preparing technical and cost proposals., • Supervising fieldwork including test borings and instrumentation installations and construction monitoring for dam and levee rehabilitation projects., • Providing data analysis, organization, and interpretation in support of dam/levee inspections, evaluations, and rehabilitations projects., • Executing and/or supervising engineering analyses including seepage and slope stability analyses of embankment dams and levees, drainage and filter designs, gravity dam stability analyses., • Writing and/or reviewing field reports, inspection/engineering reports, and permit applications. Education/Skills/Experience: • B.S. in Civil Engineering or related field of practice is required. Master’s Degree with a Geotechnical focus is a plus., • Professional Engineer license in NJ with the ability to obtain PE in NY and PA., • 15 to 20 years of experience in civil – geotechnical engineering, with direct involvement in dam safety inspections, condition assessments, subsurface exploration programs, engineering analyses, dam rehabilitation design, and regulatory permitting., • Experience completing projects with public sector/municipal agencies in New Jersey, New York and Pennsylvania is highly preferred., • Proven experience with design and development of engineering technical specifications, cost estimating and other related bidding documents., • Strong interpersonal skills and ability to speak publicly., • Solid project financial management skills; knowledge of production support systems and personal computer proficiency are all required competencies., • Experience in providing technical and project leadership to staff-level or junior engineers., • A strong background using various geotechnical computer software such as SEEP/W, SLOPE/W, and finite element analysis software such as PLAXIS are preferred., • Knowledgeable of dam and levee safety guidelines utilized by the U.S. Army Corps of Engineers, Bureau of Reclamation, Federal Energy Regulatory Commission, Natural Resource Conservation Service, and other Federal agencies, as well as State Dam Safety agencies. All applicants must be legally authorized to work in the United States without sponsorship and must already possess long-term work authorization.

Job DescriptionDescription: KS Engineers, P.C. (KSE) is a mid-size engineering and construction management firm ranking in the ENR Top 500 for design and ENR Top 100 for construction management. We are headquartered in Newark, NJ, with regional offices in New York City and Newburgh, NY; Philadelphia and Pittsburgh, PA; Mount Laurel and Mount Arlington, NJ; and Rocky Hill, CT. The firm provides engineering, construction management, and land surveying services to both public and private sector clients. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Senior Structural Engineer (Bridges) Reports to: Vice President - Structural General Qualities • Has excellent communication and writing skills., • Has excellent Microsoft Word and Excel. Ability to navigate through company internet-based systems., • Proactive self-starter capable of setting a positive example for the staff. Technical Responsibilities • Manage multiple building/bridge design projects concurrently, including project planning, scheduling, budgeting, and resource allocation, to ensure timely and successful project delivery within scope and budget constraints., • Utilize advanced structural analysis techniques and software tools to perform complex analyses, optimize designs, and ensure structural integrity, efficiency, and safety., • Serve as the primary point of contact for clients, consulting with them to understand project requirements, goals, and constraints, and providing expert technical advice, presentations, and solutions to address their needs., • Ensure compliance with relevant industry codes, standards, and regulations governing bridge design and construction, including Building & Bridge Design Specifications, and local building codes., • Conduct thorough reviews of design calculations, drawings, and specifications prepared by the team to verify accuracy, consistency, and adherence to best practices and project requirements., • Collaborate with construction teams and contractors during the construction phase to address design-related issues, provide clarifications, and ensure that the construction meets design intent and performance expectations., • Identify potential risks and challenges associated with design projects, develop mitigation strategies, and proactively address issues to minimize project delays and cost overruns., • Stay abreast of emerging trends, technologies, and advancements in building and bridge engineering, structural analysis, and design optimization through professional development, training, and participation in industry conferences and forums., • Drive innovation in design by integrating cutting-edge technologies, materials, and construction methods to enhance performance, sustainability, and cost-effectiveness., • Professional Engineer license in NY or NJ, • A Bachelor’s or Master’s degree from an accredited college/university in Civil Engineering with a focus in structural engineering., • 5 -10 years’ experience in structural design, • Proficiency in structural analysis software (e.g., SAP2000, MIDAS Civil, LARSA) and computer-aided design (CAD) tools (e.g., AutoCAD, MicroStation)., • Knowledgeable with Risa-3D and STAADPro analysis software., • Excellent leadership, communication, and interpersonal skills, with the ability to collaborate effectively with multidisciplinary teams and interact confidently with clients and stakeholders., • Proven track record of delivering high-quality building and bridge designs on time and within budget, with a focus on innovation, sustainability, and client satisfaction. KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate on the basis of race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job Description Senior Associate (NY Engineer or Architect for Building Envelope Group) Salary Range: $175,000.00 To $200,000.00 Annually About the job: We are seeking a senior-level manager to join our Building Envelope team in New York City. The ideal candidate has a passion for delivering high-caliber work, enthusiasm for teaching and mentoring both colleagues and clients in our industry, and boundless curiosity to build a better mousetrap (enjoys using technology, thought, or creativity to improve on previous solutions). Energy and circularity will be transforming the way building envelopes are manufactured, designed, and constructed over the next decade. This is your opportunity to be a leader of a team that will teach, test, learn, and deliver the next generation of building envelope designs, repairs, reuse, and investigative solutions. Key Responsibilities • Provide leadership in the implementation of planned initiatives that support CTLGroup and the Building Envelope group's strategic direction, which may include technical, project management, business development, or a variety of other company-wide opportunities., • Provide day-to-day guidance to teams, ensuring to foster a collaborative environment where knowledge is shared and creative solutions are supported., • Assist with finding, interviewing, hiring, and developing staff through mentorship and providing ongoing feedback., • Proactively perform Client outreach by leveraging existing client relationships. Work with the CTLGroup business development and marketing teams to prepare and review proposals., • Apply architectural engineering first principles and analytical methods to determine the causes of building envelope problems, including the root causes of air infiltration, water infiltration, condensation, thermal radiation, and solar radiation., • Work with CTLGroup colleagues to implement standard operating procedures.Create an atmosphere where incremental improvements can be suggested and implemented for continuous learning and enhancement., • Oversee the quality of work on a personal level.Implement the CTLGroup quality assurance standards within the building envelope group., • Support expert witness projects, as needed. Prepare and participate in depositions, as required., • Manage and oversee projects, ensuring deadlines and budget constraints are met., • Stay abreast of advancements in building envelope systems, energy codes, materials science, and forensic analysis., • Experience with FGIA, AAMA, and ASTM exterior wall pre-qualification requirements for a variety of materials and systems.Track record overseeing visible mock-ups and Performance mock-ups., • Establish and maintain good working relationships and collaborative arrangements within the Architectural/Engineering/Construction/Building Management community and other organizations to help achieve the goals of CTLGroup. Requirements • Education: Bachelor’s degree (BS) in Civil Engineering, Architectural Engineering, or Structural Engineering required; an Advanced degree (MS / PhD) is an asset., • Experience: 11+ years of project experience in building envelope design, repair, and investigation. 5+ years of experience in the New York market. 2+ years managing direct reports., • Licensure: Professional licensure is a requirement, either a Professional Engineer (PE) in the State of New York, or a Registered Architect (RA) in the State of New York, with both licenses an asset., • Certifications (For NY candidates only): Experience with NYC Local Law 11 Facade Inspection Safety Program. Qualified Exterior Wall Inspector (QEWI) designation from the New York City Department of Buildings or ability to obtain QEWI within 12 months of start., • Communication Skills: Excellent written and verbal communication skills. (Be willing to provide examples within the interview process) Expresses a passion for working on challenging building envelopes (either forensic investigations of exterior wall systems or working with design architects on custom-designed / high-performing exterior wall systems. Both are assets.), • Project Management: Experience managing budgets and schedules, and leading projects that require multiple disciplines to achieve the project goals., • Business Development: Track record of clients who are satisfied with project delivery (at least three references will be required). Fluent in proposal writing. Physical and Travel Demands • Position may require some work to be completed in a field or laboratory environment, including work from heights or in confined spaces., • Enjoy up to 20%+ of the time in the field mentoring staff on building envelope existing conditions., • Up to 15% travel at times may be required at times for this position. Who we are: We are CTLGroup, a team of engineers, architects, scientists, and consultants who are seasoned technical experts possessing unparalleled experience, knowledge, and testing proficiency in structures and materials. Our integrated team is backed by one of the most sophisticated commercial structural and building materials laboratories in the United States. Whether providing technical consultation, conducting laboratory studies, performing failure investigations, or offering expert testimony, we aim to solve our clients' problems and assist in achieving their objectives. Beyond delivering mere data, our team provides a foundation of confidence upon which our clients can build. *This job description describes the general nature of the position. The above declarations are not intended to be a complete list of responsibilities, skills and abilities required to do the job. CTLGroup provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

About NYC Health + Hospitals NYC Health + Hospitals is the largest public health care system in the United States. We provide essential outpatient, inpatient and home-based services to more than one million New Yorkers every year across the city’s five boroughs. Our large health system consists of ambulatory centers, acute care centers, post-acute care/long-term care, rehabilitation programs, Home Care, and Correctional Health Services. Our diverse workforce is uniquely focused on empowering New Yorkers. At NYC Health + Hospitals, our mission is to deliver high quality care health services, without exception. Every employee takes a person-centered approach that exemplifies the ICARE values (Integrity, Compassion, Accountability, Respect, and Excellence) through empathic communication and partnerships between all persons. Work Shifts 8:00 A.M – 4:00 P.M Duties & Responsibilities Purpose of Position: Under the general supervision of the Director, Engineering and Support Services, assists in directing programs to manage building maintenance, grounds, and equipment and procurement or generation of utilities and their distribution systems. Formulates and evaluates programs and projects and supervises functional programming activities. Ensures ongoing compliance with NYC Health + Hospitals and relevant health care setting policies, and other appropriate regulatory requirements. Essential Duties and Responsibilities: 1. Directs, coordinates, and maintains control over project assignments and related activities including in-house construction, renovation, and engineering activities. Follows standard methods and procedures for the implementation of maintenance systems and operations, construction contracts, and/or capital projects development. 2. Assists in the direction of trade staff through the development processes and procedures for the implementation of maintenance operations, construction contracts, and capital projects. Assists the Director in identifying staffing needs to support service delivery. 3. Prepares reports, develops and prepares engineering management audits, studies and surveys for the Director, and/or other senior management, detailing proposed new programs, statistical studies, and health care setting planning. 4. Assists in the collection of data and preparation of reports that outline the scope and estimated cost of projects proposed, implemented and developed. Organizes staff meetings, reviews capital and expense budget submissions and provides recommendations regarding proposed projects and programs. May represent the Director in budget meetings. 5. Plans and implements programs to establish performance standards to achieve increased productivity and accountability of trade staff. Reviews and evaluates existing programs, services, policies and procedures. 6. Provides departmental orientation, training and guidance to staff. Conducts in-service training programs, continually assessing staff training needs; suggests changes to Director to provide more efficient operations., 7. Coordinates efforts and cooperates with departmental leadership on matters of mutual concern and extends functional guidance and assistance. Meets with health care setting clients and staff to plan, prioritize, coordinate and/or communicate programs and policies, as needed. 8. May provide consultative services to senior leadership or liaise with Federal, State, and City agencies on matters pertaining to engineering, construction, design projects and/or other engineering support programs and functions., 9. In the Director’s absence, may represent the System in certain legal matters dealing with State, City, and Federal agencies., 10. Performs other related duties, as directed. Minimum Qualifications • Bachelor’s Degree from an accredited college or university in Engineering, Architecture, Construction Management, Construction Engineering or a related discipline; and two (2) years of responsible-level experience in project, facilities or construction management, capital project planning, development, and design or other related experience in a hospital or health care setting; or Department Preferences EDUCATION • Knowledge and understanding of healthcare building and mechanical, structural and electrical systems., • General knowledge and expertise in NFPA, TJC, CMS, EPA and OSHA Codes and regulations, • Ability to meet established goals and objectives, • Must have the ability to read, comprehend and transmit detailed instructions orally and in writing., • Should have knowledge of CMMS Systems. Benefits NYC Health and Hospitals offers a competitive benefits package that includes: • Comprehensive Health Benefits for employees hired to work 20+ hrs. per week, • Retirement Savings and Pension Plans, • Paid Holidays and Vacation in accordance with employees' Collectively bargained contracts, • Loan Forgiveness Programs for eligible employees, • College tuition discounts and professional development opportunities, • College Savings Program, • Union Benefits for eligible titles, • Multiple employee discounts programs, • Commuter Benefits Programs

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Health insurance We are looking for a motivated and detail-oriented Junior Structural Engineer to join our team. This is an excellent opportunity for a recent graduate to gain hands-on experience in structural design, drafting, and field coordination under the mentorship of experienced engineers. Responsibilities: • Assist in performing structural analysis and design under supervision., • Support in preparing design drawings, specifications, and reports., • Conduct site visits and inspections with senior staff., • Help review submittals and respond to contractor inquiries., • Participate in team meetings and training sessions.Applicant must be a NJ/NY Permanent Resident who has their own transportation to Lyndhurst on a daily basis.