Trabajos software engineer en Atlantic City, NJCrear alertas

The successful candidate will provide Software Engineering and System support for the Automated Message Handling System (AMHS) and National Airspace Data Interchange Network (NADIN) systems, focusing on software development and maintenance activities. We are seeking a skilled and motivated Software

Job DescriptionSalary: A3 Technology, Inc. is seeking an Integration Systems Engineer to join our Terminal Flight Data Manager (TFDM) team that supports the Federal Aviation Administration (FAA). This is a100% on-site, full-time position at the William J Hughes Technical Center (WJHTC) in Egg Harbor Township, NJ. TFDM is the surface management solution for the FAAs Next Generation Air Transportation System (NextGen). With growing congestion on the airport surface due to the increase in commercial air traffic nationwide, the need for efficient aircraft traffic planning on the airport ground is critical. TFDM will be: • Modernizing the air traffic control tower equipment by improving the exchange of electronic flight data and implementing electronic flight strips in the tower., • Streamlining the flow of departures on the surface to save fuel and reduce CO2 emissions., • Develop and maintain integration plans that detail the sequencing, timing, and technical steps required for TFDM deployment across NAS facilities., • Collaborate with FAA stakeholders (e.g., AJM, AJT, AJW, ANG) and contractors to align integration schedules and deliverables with broader NAS modernization efforts., • Support the design and management of system interfaces between TFDM and other systems such as STARS, ERAM, SWIM, TBFM, and external stakeholders (airlines, airports, surface surveillance systems)., • Ensure compatibility and data integrity across all TFDM interfaces, including the use of FIXM and SWIM-compliant formats., • Develop integration test plans and participate in system integration testing (SIT), factory acceptance testing (FAT), and site acceptance testing (SAT)., • Identify, isolate, and resolve integration defects across TFDM subsystems and interfacing systems., • Support the technical aspects of TFDM site implementation activities, including adaptation data validation, system configuration, and equipment compatibility assessments., • Coordinate with Deployment Leads and Site Implementation Teams to ensure successful system activation at terminal facilities., • Ensure all integration activities adhere to FAA requirements, including DO-278A software assurance levels, cybersecurity policies, and safety risk management documentation., • Support updates to the System Requirements Specification (SRS), Interface Control Documents (ICDs), and Site-Specific Implementation Plans (SSIPs)., • Investigate and troubleshoot system integration issues using logs, diagnostic tools, and coordination with software and hardware engineers., • Conduct root cause analysis for system failures or integration anomalies during lab and live operations., • Create and maintain integration documentation including network diagrams, interface specifications, integration checklists, and test reports., • Contribute to the creation of system-level engineering artifacts for configuration management and baseline control., • Work closely with TFDM software developers, hardware engineers, cybersecurity analysts, and program managers to ensure aligned integration activities., • Coordinate with external stakeholders such as airport operations, airline partners, and OEMs to ensure real-time surface data exchange and operational readiness., • Identify and document risks associated with integration activities and propose mitigation strategies., • Support the TFDM IPT in resolving integration risks and technical dependencies across programs (e.g., TFMS, SWIM, TBFM)., • Recommend enhancements to integration processes, tools, and test automation to improve system deployment efficiency and reliability., • Stay current with FAA NextGen initiatives and surface management advancements to ensure TFDM evolves in alignment with future technologies., • Bachelor of Science degree in Engineering and 5-25 years related work experience OR, • Master's degree in Engineering and 3-20 years related work experience. Additionally, US Citizenship or documented proof of eligibility to work in the US is a must. Upon receiving a conditional offer of employment, candidates will undergo a Government investigation and must meet eligibility requirements for Government clearance. Verification of past employment, education and references is also required. It is imperative that candidates be either a US citizen or a current green card holder with the last 3 consecutive years as a resident of the US. The salary range for positions is $50,000 to $175,000. This range is provided as a general guideline and should not be interpreted as a guarantee of compensation. Actual salary offers will be determined based on a variety of factors, including but not limited to the specific responsibilities of the position, the candidates education, experience, location, knowledge, skills, and abilities. In addition, compensation may be influenced by applicable Federal Government contract labor categories and established contract wage rates. At A3 Technology, Inc., we take pride in being an Equal Opportunity Employer (EEO) and Affirmative Action (AA) employer. We're committed to considering all qualified candidates for employment without regard to race, religion, color, sex, sexual orientation, gender identity, age, protected veteran status, disability, national origin, genetic information or any other protected status.

Job DescriptionSalary: A3 Technology, Inc. is seeking a Hardware Engineer to join ourTerminal Flight Data Manager (TFDM)team that supports the Federal Aviation Administration (FAA). This is a 100% on-site, full-time position at the William J Hughes Technical Center (WJHTC) in Egg Harbor Township, NJ. TFDM is the surface management solution for the FAAs Next Generation Air Transportation System (NextGen). With growing congestion on the airport surface due to the increase in commercial air traffic nationwide, the need for efficient aircraft traffic planning on the airport ground is critical. TFDM will be: • Modernizing the air traffic control tower equipment by improving the exchange of electronic flight data and implementing electronic flight strips in the tower., • Streamlining the flow of departures on the surface to save fuel and reduce CO2 emissions., • Gather, normalize, and integrate data from multiple sources including TFDM, ERAM, STARS, SWIM, TBFM, and surface surveillance systems (e.g., ASDE-X, ASSC)., • Develop and maintain data pipelines to support ongoing monitoring, analysis, and reporting., • Analyze aircraft surface movement data, runway utilization, pushback times, taxi-out delays, and metering effectiveness to evaluate TFDM system impact., • Support FAA stakeholders with analysis of throughput, delay reduction, queue management, and overall efficiency improvements., • Analyze data from test events including Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), and Operational Readiness Demonstrations (ORD)., • Provide quantitative assessments and visualizations to validate TFDM performance against baseline metrics and operational expectations., • Design and maintain dashboards and visual reporting tools (e.g., Power BI, Tableau) to present key performance indicators (KPIs) for internal and external stakeholders., • Tailor dashboards to support roles such as system engineers, site implementation leads, and FAA program managers., • Identify trends, anomalies, and outliers in operational data; perform root cause analysis to uncover system issues or inefficiencies., • Generate actionable insights to inform system enhancements, procedural changes, or additional training needs., • Validate the accuracy, completeness, and consistency of TFDM-related datasets, identifying and resolving data integrity issues., • Collaborate with systems engineers and developers to ensure data logging and telemetry meet analysis requirements., • Develop and deliver recurring and ad-hoc reports to TFDM program leadership, FAA stakeholders (e.g., AJM, AJT, AJW), airport authorities, and industry partners., • Support responses to data-related inquiries from internal FAA teams and external evaluators., • Contribute to the development of models that support predictive surface metering, queue estimation, and traffic flow optimization., • Assist in evaluating model performance and recommending improvements based on historical data trends., • Work with cross-functional teamsincluding software engineers, integration specialists, and operational SMEsto identify analysis needs and define data requirements., • Translate technical requirements into data products that support program goals and decision-making., • Ensure data handling complies with FAA data governance policies, privacy requirements, and cybersecurity standards., • Maintain proper documentation of methodologies, assumptions, and data sources to ensure transparency and reproducibility., • Bachelor of Science degree in Engineering and 1-25 years related work experience OR, • Master's degree in Engineering and 0-20 years related work experience. Additionally, US Citizenship or documented proof of eligibility to work in the US is a must. Upon receiving a conditional offer of employment, candidates will undergo a Government investigation and must meet eligibility requirements for Government clearance. Verification of past employment, education and references is also required. It is imperative that candidates be either a US citizen or a current green card holder with the last 3 consecutive years as a resident of the US. The salary range for positions is $50,000 to $175,000. This range is provided as a general guideline and should not be interpreted as a guarantee of compensation. Actual salary offers will be determined based on a variety of factors, including but not limited to the specific responsibilities of the position, the candidates education, experience, location, knowledge, skills, and abilities. In addition, compensation may be influenced by applicable Federal Government contract labor categories and established contract wage rates. At A3 Technology, Inc., we take pride in being an Equal Opportunity Employer (EEO) and Affirmative Action (AA) employer. We're committed to considering all qualified candidates for employment without regard to race, religion, color, sex, sexual orientation, gender identity, age, protected veteran status, disability, national origin, genetic information or any other protected status.

Job Description Job Description LS Technologies, a Tetra Tech Company, is seeking a Hardware Design/Test Engineer (Onsite) with technical expertise and Enterprise Information Display System (E-IDS) knowledge and experience to support the Federal Aviation Administration (FAA). Responsibilities • Develop and execute development test procedures, executing system test performance and stability test procedures, and Regression/user acceptance test procedures, • Developing automated tests using Selenium and/or Playwright, • Scripting test tools and test simulators, • Must have experience maintaining legacy FAA systems, such as IDS., • Practical experience doing technical work, supporting the form, fit, function of hardware., • Be knowledgeable with applicable FAA orders, directives, and criteria while designing test procedures, system requirements and evaluations., • Excellent interpersonal skills, facilitation, and management skills, written and oral communication skills and analytical skills., • Experience working in an Agile environment and participating in daily stand-ups, sprint planning, and retrospectives. Work Requirements: • Work location: WJHTC, Atlantic City, NJ, • Work Hours: Onsite 5 days per week. Normal working hours, • Travel: 0%, • Physical requirements:, • Extended Computer Use: Regular and prolonged periods of working at a computer terminal., • Lifting and Carrying: Occasional lifting of equipment and materials weighing up to 50 pounds may be required during installations or maintenance., • Mobility: Ability to move around the office environment to access computer hardware, networking equipment, and server rooms., • Dexterity: Manual dexterity and visual acuity to operate computer equipment, troubleshoot issues, and perform tasks requiring precision., • Sitting/Standing: Both prolonged sitting and occasional standing may be required for troubleshooting and attending to system issues. At LS Technologies, a Tetra Tech Company, we're enhancing our nation's critical infrastructure by providing engineering, technical, and professional services to Federal Government agencies. The quality of our work, deep technical expertise, and genuine passion for public service sets us apart. As a growing organization we are expanding our benefits and communication with our employees, offering add-ons that speak to our growing employees' needs. Join us in delivering high-quality solutions and shaping the future of safety and innovation for our government partners. EEO Commitment LS Technologies, a Tetra Tech Company, is proud to be an Equal Opportunity Employer. All qualified candidates will be considered without regard to race, color, religion, national origin, age, disability, sex, marital or familial status, status as a protected veteran, or any other characteristic protected by law. Tetra Tech is a VEVRAA federal contractor, and we request priority referral of veterans. We invite applications from all interested parties. Requesting an Accommodation LS Technologies is committed to providing equal employment opportunities for persons with disabilities or religious observances, including reasonable accommodation when needed. If you are hired by LS Technologies and require accommodation to perform the essential functions of your role, you will be asked to participate in our reasonable accommodation process. Accommodations made to facilitate the recruiting process are not a guarantee of future or continued accommodations once hired. If you would like to be considered for employment opportunities with LS Technologies and have accommodation needs for a disability or religious observance, please send us an email or speak with your recruiter. Compensation (Pay Bands) Salary at LST is determined by a wide array of factors, such as (but not limited to) education, certifications, knowledge, skills, competencies, and experience, location, and clearance level, as well as contract-specific affordability and organizational requirements and applicable employment laws. Please note that the salary information is a general guideline only. The projected compensation range for this position is provided within the posting and is based on full-time, 40 hour/week status. Part-time staff receive compensation at an hourly rate. The estimated minimum and maximum displayed represents the broadest range for this position (inclusive of high geographic and high clearance requirements) and is just one component of LSTs total compensation package for employees. ** In compliance with local laws, LS Technologies presents this reasonable compensation range as a guideline for roles in California, Colorado, New York, or Washington D.C." Benefits offered to all employees who work 30+ hours per week: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Annual Leave, and Holidays. About Tetra Tech: Tetra Tech is the leader in water, environment, and sustainable infrastructure, providing high-end consulting and engineering services for projects worldwide. With 30,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. Explore our open positions at . Follow us on social media to learn more about our people, culture, and opportunities: LinkedIn: @TetraTechCareers X (Twitter): @TetraTechJobs Job Posted by ApplicantPro

Job DescriptionJob Description Crown is hiring an Senior Mechanical Engineer - HVAC to join our team. In this role you will work in an office on-site at the Technical Center in Atlantic City, New Jersey as well as prepare design documents for heating, air conditioning, ventilation, and plumbing systems for a variety of facility and navigational aid sites. Responsibilities: • Experience in AutoCAD and Autodesk Revit software is preferred but not required., • Experience in SpecsIntact specification writing software is preferred but not required., • Conduct site survey assessments and create reports with recommendations for facility and site improvements., • Must be familiar with BlueBeam Revu, Autodesk Revit, and MS office applications., • Must be familiar with HVAC load calculations/design, plumbing calculations/design and general commercial building code and guideline requirements as it pertains to ASHRAE, NFPA, and ICC., • Must be a self-starter and able to work independently to meet design deliverable deadlines with limited or no supervision., • Must be able to collaborate and work in a team setting remotely through a PC as well as in office., • Must be flexible and able to work on multiple projects ranging from small facility remodels to larger new build or remodel projects., • Read and interpret blueprints, technical drawings, schematics, specifications, and computer-generated design drawings., • Experience estimating design hours for the mechanical discipline., • Attend meetings with owners, clients, or architects as needed., • Review contractor submittals (shop drawings, etc.) to determine conformance with contract documents, • Evaluate, select and apply standard engineering techniques, procedures, and criteria to perform assigned tasks, • Confer with other engineers and other personnel to implement operating procedures, resolve system malfunctions, and provide technical information., • Research and analyze customer design proposals specifications, manuals, and other data to evaluate the feasibility, cost, and maintenance requirements of designs or applications., • Specify system components or direct modification of products to ensure conformance with engineering design and performance specifications., • Research, design, and evaluate mechanical products, equipment, systems, and processes to meet requirements, apply knowledge of engineering principles., • Provide feedback to design engineers on customer problems and needs.Qualifications, • BS in Mechanical Engineering required from an ABET accredited program. Engineer in Training (EIT) or Fundamentals of Engineering (FE) certification preferred. Professional Engineer (PE) registration is a plus., • 10+ years of experience in Mechanical/Plumbing design (pertaining to building systems design/design-build). Experience in renovations of older mechanical systems and controls is a plus., • Comprehension of building and design regulations and working in codes and standards across multiple jurisdictions and AHJs including but not limited to government agency design guides and standards, ASHRAE, NFPA, ICC, and Uniform Codes., • Familiarity with Autodesk AutoCAD, Bentley Projectwise, and Mircrostation is preferred., • Familiarity with the various types of HVAC systems and design (air and water cooled systems, boilers, piping, RTU, VAV, CRAC, etc.). Additional Information Visit: for additional information about Crown Innovations, Inc. We offer a competitive benefits package including matching 401K, comprehensive medical, dental, and vision plans, and generous PTO. Crown has been voted one of the best places to work in the Washington, DC area; we built this reputation by hiring great people who value and support the mission of our customers. Persons unable to complete an online application should contact Crown HR for assistance at (703) 650-0663 ext. 3059. As a government contractor, most of Crown’s positions require U.S. citizenship. Crown is a VEVRAA Federal Contractor

Job DescriptionSalary: A3 Technology, Inc. is seeking a Systems Engineer to support the FAAs Terminal Flight Data Manager (TFDM) program and its integration with the Flight Data Input/Output (FDIO) system. TFDM is the tower modernization initiative designed to replace legacy, paper-based and stand-alone systems with integrated, digital tools that improve flight data management, surface traffic efficiency, and collaborative decision-making. The program consolidates multiple older systems into a modern, electronic environment. FDIO serves as a critical interface within this ecosystem, enabling controllers and other stakeholders to access real-time flight plan information from ERAM and other core FAA systems. Together, TFDM and FDIO provide more accurate data sharing, improved departure sequencing, and enhanced situational awareness to reduce delays, save fuel, and improve the safety and predictability of air traffic operations. Responsibilities: • Develop, manage, and validate site-specific adaptation data., • Configure TFDM system parameters for local operations, coordinating with FAA facilities and airports, performing adaptation testing and validation, and maintaining version-controlled configuration records to ensure operational accuracy and interoperability., • Develop, manage, and validate site adaptation data tailored to each TFDM deployment location (e.g., airports, TRACONs)., • Ensure configurations accurately reflect local airspace, surface operations, runway/taxiway layouts, and stakeholder operational procedures., • Collect and analyze local site data such as flight schedules, runway configurations, surveillance inputs, and facility-specific workflows., • Coordinate with local air traffic control facilities and airport authorities to obtain accurate, up-to-date operational data., • Customize TFDM system parameters for surface metering, departure sequencing, runway assignments, and flight data exchange to reflect the unique needs of each site., • Support the calibration of algorithms to optimize surface traffic management and throughput., • Use FAA-authorized adaptation tools and software to build, test, and deploy configuration files., • Maintain version control and configuration management practices to ensure integrity and traceability of adaptation data., • Ensure consistency and compatibility of adaptation data with interfacing systems such as STARS, ERAM, TBFM, and surface surveillance systems., • Coordinate interface configurations to support seamless data exchange and operational interoperability., • Participate in Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), and Dry Runs to validate the performance of site-specific adaptations., • Conduct pre- and post-deployment validation to ensure the system functions as intended under local operating conditions., • Collaborate with FAA site leads, facility personnel, airline operators, and airport representatives to define operational needs and validate adaptation outputs., • Support user feedback collection and incorporate changes into adaptation updates., • Prepare technical documentation including adaptation guides, site-specific configuration summaries, and version release notes., • Maintain records of adaptation changes, rationale, and stakeholder approvals in accordance with FAA change management policies., • Provide on-site or remote support during TFDM system transition, ensuring real-time resolution of adaptation-related issues., • Assist controllers and technical staff in understanding adaptation elements during the go-live process., • Recommend updates to the adaptation process based on lessons learned, system feedback, and evolving site requirements., • Monitor deployed system performance and propose adaptation refinements to enhance operational effectiveness. Skills Required: • Detail oriented, independent, self-motivated, and a proactive team member. Skills Preferred: • Experience with FAA NAS or Mission Support systems. Education: • Bachelor's degree in a technical field (engineering, math, physics, chemistry, biology, meteorology/earth sciences, aeronautical science, computer science) and 10-15 years relevant experience. Additionally, US Citizenship or documented proof of eligibility to work in the US is a must. Upon receiving a conditional offer of employment, candidates will undergo a Government investigation and must meet eligibility requirements for Government clearance. Verification of past employment, education and references is also required. It is imperative that candidates be either a US citizen or a current green card holder with the last 3 consecutive years as a resident of the US. The salary range for positions is $50,000 to $175,000. This range is provided as a general guideline and should not be interpreted as a guarantee of compensation. Actual salary offers will be determined based on a variety of factors, including but not limited to the specific responsibilities of the position, the candidates education, experience, location, knowledge, skills, and abilities. In addition, compensation may be influenced by applicable Federal Government contract labor categories and established contract wage rates. At A3 Technology, Inc., we take pride in being an Equal Opportunity Employer (EEO) and Affirmative Action (AA) employer. We're committed to considering all qualified candidates for employment without regard to race, religion, color, sex, sexual orientation, gender identity, age, protected veteran status, disability, national origin, genetic information or any other protected status.

Job DescriptionSalary: A3 Technology, Inc. is seeking a Systems Engineer to support the FAAs Terminal Flight Data Manager (TFDM) program and its integration with the Flight Data Input/Output (FDIO) system. TFDM is the tower modernization initiative designed to replace legacy, paper-based and stand-alone systems with integrated, digital tools that improve flight data management, surface traffic efficiency, and collaborative decision-making. The program consolidates multiple older systems into a modern, electronic environment. FDIO serves as a critical interface within this ecosystem, enabling controllers and other stakeholders to access real-time flight plan information from ERAM and other core FAA systems. Together, TFDM and FDIO provide more accurate data sharing, improved departure sequencing, and enhanced situational awareness to reduce delays, save fuel, and improve the safety and predictability of air traffic operations. Responsibilities: • Develop, manage, and validate site-specific adaptation data., • Configure TFDM system parameters for local operations, coordinating with FAA facilities and airports, performing adaptation testing and validation, and maintaining version-controlled configuration records to ensure operational accuracy and interoperability., • Develop, manage, and validate site adaptation data tailored to each TFDM deployment location (e.g., airports, TRACONs)., • Ensure configurations accurately reflect local airspace, surface operations, runway/taxiway layouts, and stakeholder operational procedures., • Collect and analyze local site data such as flight schedules, runway configurations, surveillance inputs, and facility-specific workflows., • Coordinate with local air traffic control facilities and airport authorities to obtain accurate, up-to-date operational data., • Customize TFDM system parameters for surface metering, departure sequencing, runway assignments, and flight data exchange to reflect the unique needs of each site., • Support the calibration of algorithms to optimize surface traffic management and throughput., • Use FAA-authorized adaptation tools and software to build, test, and deploy configuration files., • Maintain version control and configuration management practices to ensure integrity and traceability of adaptation data., • Ensure consistency and compatibility of adaptation data with interfacing systems such as STARS, ERAM, TBFM, and surface surveillance systems., • Coordinate interface configurations to support seamless data exchange and operational interoperability., • Participate in Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), and Dry Runs to validate the performance of site-specific adaptations., • Conduct pre- and post-deployment validation to ensure the system functions as intended under local operating conditions., • Collaborate with FAA site leads, facility personnel, airline operators, and airport representatives to define operational needs and validate adaptation outputs., • Support user feedback collection and incorporate changes into adaptation updates., • Prepare technical documentation including adaptation guides, site-specific configuration summaries, and version release notes., • Maintain records of adaptation changes, rationale, and stakeholder approvals in accordance with FAA change management policies., • Provide on-site or remote support during TFDM system transition, ensuring real-time resolution of adaptation-related issues., • Assist controllers and technical staff in understanding adaptation elements during the go-live process., • Recommend updates to the adaptation process based on lessons learned, system feedback, and evolving site requirements., • Monitor deployed system performance and propose adaptation refinements to enhance operational effectiveness. Skills Required: • Detail oriented, independent, self-motivated, and a proactive team member. Skills Preferred: • Experience with FAA NAS or Mission Support systems. Education: • Bachelor's degree in a technical field (engineering, math, physics, chemistry, biology, meteorology/earth sciences, aeronautical science, computer science) and 0-5 years relevant experience. Additionally, US Citizenship or documented proof of eligibility to work in the US is a must. Upon receiving a conditional offer of employment, candidates will undergo a Government investigation and must meet eligibility requirements for Government clearance. Verification of past employment, education and references is also required. It is imperative that candidates be either a US citizen or a current green card holder with the last 3 consecutive years as a resident of the US. The salary range for positions is $50,000 to $175,000. This range is provided as a general guideline and should not be interpreted as a guarantee of compensation. Actual salary offers will be determined based on a variety of factors, including but not limited to the specific responsibilities of the position, the candidates education, experience, location, knowledge, skills, and abilities. In addition, compensation may be influenced by applicable Federal Government contract labor categories and established contract wage rates. At A3 Technology, Inc., we take pride in being an Equal Opportunity Employer (EEO) and Affirmative Action (AA) employer. We're committed to considering all qualified candidates for employment without regard to race, religion, color, sex, sexual orientation, gender identity, age, protected veteran status, disability, national origin, genetic information or any other protected status.

Job DescriptionDescription: At SEMCON, we are dedicated to supporting the Federal Aviation Administration (FAA) by providing top-tier technical, managerial, and professional resources to meet their needs. Our team is made up of talented individuals who contribute to a collaborative, dynamic work environment. We believe in fostering a culture that focuses on career growth, enriching experiences, and collaboration. At SEMCON, we work together to create an environment where everyone thrives, and our collective success is greater than the sum of our parts. We’re looking for a Security Engineer to join our team at the William J. Hughes Technical Center to support the Voice Switching and Recording (VS&R) program. This role will involve performing security assessments and implementing security controls on a range of systems and technologies. Requirements: The Security Engineer should be proficient in Linux and will focus on Security Assessments and Security Implementation and experience should include all or a combination of the following : Linux System Administration: (High Priority - Must have) • Proficient Linux experience (comfortable on the terminal, writing bash scripts, configuring packages and servers), • Hands-on working knowledge of Linux OS system structure and configuration (e.g. directory structure, device files, network configuration, file management), • Hands-on experience of networking, including network design, VLAN/subnetting, configuring managed routers/switches, • Knowledge of network protocol interactions, • Experience performing hands-on port scanning & vulnerability scanning, including remediating, at the technical level, each finding in the scans, including proving false failures (why a scan result may be invalid), • Working knowledge of security standards, e.g. NIST 800-53, HSPD-23, ISO 27001, • Experience performing penetration testing to verify new security controls are effective., • Familiarity using cryptographic protocols (asymmetric/symmetric ciphers, hashing, key exchange), • Strong logic/reasoning skills (e.g., can understand/analyze requirements, and identify logical gaps), • Experience conducting and participating in technical interchange meetings, • Strong, clear verbal and written communication skills, • Proficient in two or more of: C/C++, Python, Golang, Rust, • Usage of version control software (e.g., Git), • Knowledge of software design patterns and anti-patterns A Bachelor's Degree in Computer Science, Engineering, or related discipline and at least 6-15 years of experience is preferred. SEMCON will offers a competitive salary and complete benefits package which includes health benefits (medical, dental, vision, and life), 401K with a generous employer match, paid time off, and paid holidays. Some hybrid/telework may be available for candidates with a long commuting distance from the facility in Egg Harbor Township, NJ, however a regular on-site presence is also required. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. This is an in-person position with a requirement to work on site 5 days per week.

Job DescriptionSalary: A3 Technology, Inc. is seeking a Systems Engineer to support the FAAs Terminal Flight Data Manager (TFDM) program and its integration with the Flight Data Input/Output (FDIO) system. TFDM is the tower modernization initiative designed to replace legacy, paper-based and stand-alone systems with integrated, digital tools that improve flight data management, surface traffic efficiency, and collaborative decision-making. The program consolidates multiple older systems into a modern, electronic environment. FDIO serves as a critical interface within this ecosystem, enabling controllers and other stakeholders to access real-time flight plan information from ERAM and other core FAA systems. Together, TFDM and FDIO provide more accurate data sharing, improved departure sequencing, and enhanced situational awareness to reduce delays, save fuel, and improve the safety and predictability of air traffic operations. Responsibilities: • Assist with system modifications and hardware/software installation., • Review site drawings, fabricating and testing cables, and validating deployed systems to ensure proper functionality., • Provide support to FDIO Second Level Engineering., • Assist with FDIO Modifications., • Read site drawings., • Install and validate hardware and software., • Cable fabrication and testing. Skills Required: • Knowledge of computer hardware - comparable to Comp TIA A+ certification., • Ability to follow directions., • Able to communicate with various organizations within the FAA., • Skilled in using MS Suite (Word, Excel, PowerPoint)., • Knowledge of cable paths and protocols (serial, Ethernet, Fiber)., • Excellent written and verbal communication skills using both technical and user-friendly language., • Possess a flexible personality, self-motivated and willingness to multi-task., • Detailed-oriented mindset and proficiency in researching and analyzing highly technical information and systems., • Strong interpersonal skills and the ability to work as part of a team., • Detail oriented, independent, self-motivated, and a proactive team member. Skills Preferred: • Experience with FAA NAS or Mission Support systems. Education: • Bachelor's degree in a technical field (engineering, math, physics, chemistry, biology, meteorology/earth sciences, aeronautical science, computer science) and 0-5 years relevant work experience. Additionally, US Citizenship or documented proof of eligibility to work in the US is a must. Upon receiving a conditional offer of employment, candidates will undergo a Government investigation and must meet eligibility requirements for Government clearance. Verification of past employment, education and references is also required. It is imperative that candidates be either a US citizen or a current green card holder with the last 3 consecutive years as a resident of the US. The salary range for positions is $50,000 to $175,000. This range is provided as a general guideline and should not be interpreted as a guarantee of compensation. Actual salary offers will be determined based on a variety of factors, including but not limited to the specific responsibilities of the position, the candidates education, experience, location, knowledge, skills, and abilities. In addition, compensation may be influenced by applicable Federal Government contract labor categories and established contract wage rates. At A3 Technology, Inc., we take pride in being an Equal Opportunity Employer (EEO) and Affirmative Action (AA) employer. We're committed to considering all qualified candidates for employment without regard to race, religion, color, sex, sexual orientation, gender identity, age, protected veteran status, disability, national origin, genetic information or any other protected status.

Job Description Job Description LS Technologies, a Tetra Tech Company, is seeking a UI Software Engineer (Onsite) with technical expertise and Enterprise Information Display System (E-IDS) knowledge and experience to support the Federal Aviation Administration (FAA). Responsibilities • Front-end Angular web development and middle-tier Java Spring Boot API development, • HTML5, CSS3, JavaScript (ES6+) for front-end development, • Support the deployment of newly developed applications through the creation of automated deployment scripts and installation documentation., • Work with ticketing systems, operational staff, and quality assurance personnel to identify and fix software defects., • Provide time estimates and technical input to project deliverables., • Assist in development of Software Manuals and Help Guides, • Must have experience maintaining legacy FAA systems, such as IDS., • Practical and detailed familiarity with Angular, including components, services, pipes, and routing, • Knowledge of TypeScript and its benefits for large-scale applications, • Experience with Spring Boot framework, including RESTful APIs, controllers, services, and repositories, • Knowledge of relational databases such as PostgreSQL, • Familiarity with unit testing frameworks like JUnit, Mocha, and Jasmine, • Ability to work in an Agile environment and participate in daily stand-ups, sprint planning, and retrospectives, • Familiarity with containerization using Docker or Kubernetes, • Understanding of DevOps principles and continuous integration/continuous deployment (CI/CD) pipelines, • Excellent interpersonal skills, facilitation, and management skills, written and oral communication skills and analytical skills., • Experience working in an Agile environment and participating in daily stand-ups, sprint planning, and retrospectives. Work Requirements: • Work location: WJHTC, Atlantic City, NJ, • Work Hours: Onsite 5 days per week. Normal working hours, • Travel: 0%, • Physical requirements:, • Extended Computer Use: Regular and prolonged periods of working at a computer terminal., • Lifting and Carrying: Occasional lifting of equipment and materials weighing up to 50 pounds may be required during installations or maintenance., • Mobility: Ability to move around the office environment to access computer hardware, networking equipment, and server rooms., • Dexterity: Manual dexterity and visual acuity to operate computer equipment, troubleshoot issues, and perform tasks requiring precision., • Sitting/Standing: Both prolonged sitting and occasional standing may be required for troubleshooting and attending to system issues. At LS Technologies, a Tetra Tech Company, we're enhancing our nation's critical infrastructure by providing engineering, technical, and professional services to Federal Government agencies. The quality of our work, deep technical expertise, and genuine passion for public service sets us apart. As a growing organization we are expanding our benefits and communication with our employees, offering add-ons that speak to our growing employees' needs. Join us in delivering high-quality solutions and shaping the future of safety and innovation for our government partners. EEO Commitment LS Technologies, a Tetra Tech Company, is proud to be an Equal Opportunity Employer. All qualified candidates will be considered without regard to race, color, religion, national origin, age, disability, sex, marital or familial status, status as a protected veteran, or any other characteristic protected by law. Tetra Tech is a VEVRAA federal contractor, and we request priority referral of veterans. We invite applications from all interested parties. Requesting an Accommodation LS Technologies is committed to providing equal employment opportunities for persons with disabilities or religious observances, including reasonable accommodation when needed. If you are hired by LS Technologies and require accommodation to perform the essential functions of your role, you will be asked to participate in our reasonable accommodation process. Accommodations made to facilitate the recruiting process are not a guarantee of future or continued accommodations once hired. If you would like to be considered for employment opportunities with LS Technologies and have accommodation needs for a disability or religious observance, please send us an email or speak with your recruiter. Compensation (Pay Bands) Salary at LST is determined by a wide array of factors, such as (but not limited to) education, certifications, knowledge, skills, competencies, and experience, location, and clearance level, as well as contract-specific affordability and organizational requirements and applicable employment laws. Please note that the salary information is a general guideline only. The projected compensation range for this position is provided within the posting and is based on full-time, 40 hour/week status. Part-time staff receive compensation at an hourly rate. The estimated minimum and maximum displayed represents the broadest range for this position (inclusive of high geographic and high clearance requirements) and is just one component of LSTs total compensation package for employees. ** In compliance with local laws, LS Technologies presents this reasonable compensation range as a guideline for roles in California, Colorado, New York, or Washington D.C." Benefits offered to all employees who work 30+ hours per week: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Annual Leave, and Holidays. About Tetra Tech: Tetra Tech is the leader in water, environment, and sustainable infrastructure, providing high-end consulting and engineering services for projects worldwide. With 30,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. Explore our open positions at . Follow us on social media to learn more about our people, culture, and opportunities: LinkedIn: @TetraTechCareers X (Twitter): @TetraTechJobs Job Posted by ApplicantPro

Job DescriptionSalary: A3 Technology, Inc. is seeking a Systems Engineer to support the FAAs Terminal Flight Data Manager (TFDM) program and its integration with the Flight Data Input/Output (FDIO) system. TFDM is the tower modernization initiative designed to replace legacy, paper-based and stand-alone systems with integrated, digital tools that improve flight data management, surface traffic efficiency, and collaborative decision-making. The program consolidates multiple older systems into a modern, electronic environment. FDIO serves as a critical interface within this ecosystem, enabling controllers and other stakeholders to access real-time flight plan information from ERAM and other core FAA systems. Together, TFDM and FDIO provide more accurate data sharing, improved departure sequencing, and enhanced situational awareness to reduce delays, save fuel, and improve the safety and predictability of air traffic operations. Responsibilities: • Develop, manage, and validate site-specific adaptation data., • Configure TFDM system parameters for local operations, coordinating with FAA facilities and airports, performing adaptation testing and validation, and maintaining version-controlled configuration records to ensure operational accuracy and interoperability., • Develop, manage, and validate site adaptation data tailored to each TFDM deployment location (e.g., airports, TRACONs)., • Ensure configurations accurately reflect local airspace, surface operations, runway/taxiway layouts, and stakeholder operational procedures., • Collect and analyze local site data such as flight schedules, runway configurations, surveillance inputs, and facility-specific workflows., • Coordinate with local air traffic control facilities and airport authorities to obtain accurate, up-to-date operational data., • Customize TFDM system parameters for surface metering, departure sequencing, runway assignments, and flight data exchange to reflect the unique needs of each site., • Support the calibration of algorithms to optimize surface traffic management and throughput., • Use FAA-authorized adaptation tools and software to build, test, and deploy configuration files., • Maintain version control and configuration management practices to ensure integrity and traceability of adaptation data., • Ensure consistency and compatibility of adaptation data with interfacing systems such as STARS, ERAM, TBFM, and surface surveillance systems., • Coordinate interface configurations to support seamless data exchange and operational interoperability., • Participate in Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), and Dry Runs to validate the performance of site-specific adaptations., • Conduct pre- and post-deployment validation to ensure the system functions as intended under local operating conditions., • Collaborate with FAA site leads, facility personnel, airline operators, and airport representatives to define operational needs and validate adaptation outputs., • Support user feedback collection and incorporate changes into adaptation updates., • Prepare technical documentation including adaptation guides, site-specific configuration summaries, and version release notes., • Maintain records of adaptation changes, rationale, and stakeholder approvals in accordance with FAA change management policies., • Provide on-site or remote support during TFDM system transition, ensuring real-time resolution of adaptation-related issues., • Assist controllers and technical staff in understanding adaptation elements during the go-live process., • Recommend updates to the adaptation process based on lessons learned, system feedback, and evolving site requirements., • Monitor deployed system performance and propose adaptation refinements to enhance operational effectiveness. Skills Required: • Detail oriented, independent, self-motivated, and a proactive team member. Skills Preferred: • Experience with FAA NAS or Mission Support systems. Education: • Bachelor's degree in a technical field (engineering, math, physics, chemistry, biology, meteorology/earth sciences, aeronautical science, computer science) and 5-10 years relevant experience. Additionally, US Citizenship or documented proof of eligibility to work in the US is a must. Upon receiving a conditional offer of employment, candidates will undergo a Government investigation and must meet eligibility requirements for Government clearance. Verification of past employment, education and references is also required. It is imperative that candidates be either a US citizen or a current green card holder with the last 3 consecutive years as a resident of the US. The salary range for positions is $50,000 to $175,000. This range is provided as a general guideline and should not be interpreted as a guarantee of compensation. Actual salary offers will be determined based on a variety of factors, including but not limited to the specific responsibilities of the position, the candidates education, experience, location, knowledge, skills, and abilities. In addition, compensation may be influenced by applicable Federal Government contract labor categories and established contract wage rates. At A3 Technology, Inc., we take pride in being an Equal Opportunity Employer (EEO) and Affirmative Action (AA) employer. We're committed to considering all qualified candidates for employment without regard to race, religion, color, sex, sexual orientation, gender identity, age, protected veteran status, disability, national origin, genetic information or any other protected status.

Job Description Job Description Join LS Technologies, a Tetra Tech company, as an VoIP Engineer and contribute to the testing and evaluation of cutting-edge FAA communication systems. In this role, you will support formal testing activities under the supervision of senior engineers, helping to validate the performance and reliability of ground-to-ground voice and data communications systems. You will gain hands-on experience with a variety of testing tools, methodologies, and network environments. Responsibilities: • Support FAA formal system and software testing activities as part of a cross-functional engineering team testing Voice over Internet Protocol (VoIP) systems., • Assist in developing and executing test plans, procedures, and documentation, review and comment on contractor delivered test plans and test procedures, witness testing verifying system requirements., • Design and/or perform testing of electrical and IP-based voice communication systems using industry tools such as Wireshark, LabVIEW, and GL Communications (e.g., MAPS, VQT, VQUAD)., • Conduct and report on environmental and power testing (e.g., MIL-STD-810, EMI/EMC, inrush current, total harmonic distortion)., • Apply knowledge of IPv4/IPv6 networking principles in configuring and testing systems., • Perform basic Linux commands to aid in system setup and troubleshooting., • Knowledge of Cisco switch configuration and operation in support of testing., • Support defect tracking, retesting, and test reporting processes., • Six (6) to twenty (20) years of experience in related VoIP engineering or test role., • Proficiency in Python or similar programming languages for test automation or data analysis., • Foundational understanding of TCP/IP protocol stack elements utilized in Voice over Internet Protocol (VoIP) communication systems (e.g., session initiation protocol, real time transport protocol)., • IPV4 and IPV6 networking knowledge and principles experience, including network impairment testing and reporting., • Familiarity with EUROCAE ED-137C and ED-138 standards and their applicability to the specification, design and development and test of FAA NAS IP voice communication systems., • Experience with National Instruments LabVIEW software for test application development., • Exposure to environmental test standards and methods (e.g., MIL-STD-810, Shock & Vibration Testing, EMI/EMC Testing, Humidity testing)., • Experience using GL Communications testing applications (MAPS, VQT, VQUAD)., • Working knowledge using Linux operating systems and issuing terminal-based commands., • Understanding of power testing principles and tools (e.g., power factor, inrush current measurement)., • Knowledge and experience with Cisco switch configuration and operation., • Work location: WJHTC - Onsite, • Work Hours: Normal Business Hours, • Travel: Less than 10%, • Physical requirements:, • Extended Computer Use: Regular and prolonged periods of working at a computer terminal., • Lifting and Carrying: Occasional lifting of equipment and materials weighing up to 50 pounds may be required during installations or maintenance., • Mobility: Ability to move around the office environment to access computer hardware, networking equipment, and server rooms., • Dexterity: Manual dexterity and visual acuity to operate computer equipment, troubleshoot issues, and perform tasks requiring precision., • Sitting/Standing: Both prolonged sitting and occasional standing may be required for troubleshooting and attending to system issues., • Background check: Public Trust Investigation About LS Technologies At LS Technologies, we're enhancing our nation's critical infrastructure by providing engineering, technical, and professional services to Federal Government agencies. The quality of our work, deep technical expertise, and genuine passion for public service sets us apart. As a growing organization, we are expanding our benefits and communication with our employees, offering add-ons that speak to our growing employees' needs. Join us in delivering high-quality solutions and shaping the future of safety and innovation for our government partners. EEO Commitment LS Technologies, a Tetra Tech Company, is proud to be an Equal Opportunity Employer. All qualified candidates will be considered without regard to race, color, religion, national origin, age, disability, sex, marital or familial status, status as a protected veteran, or any other characteristic protected by law. Tetra Tech is a VEVRAA federal contractor, and we request priority referral of veterans. We invite applications from all interested parties. Requesting An Accommodation LS Technologies is committed to providing equal employment opportunities for persons with disabilities or religious observances, including reasonable accommodation when needed. If you are hired by LS Technologies and require accommodation to perform the essential functions of your role, you will be asked to participate in our reasonable accommodation process. Accommodations made to facilitate the recruiting process are not a guarantee of future or continued accommodations once hired. If you would like to be considered for employment opportunities with LS Technologies and have accommodation needs for a disability or religious observance, please send us an email at or speak with your recruiter. Compensation (Pay Bands) Salary at LST is determined by a wide array of factors, such as (but not limited to) education, certifications, knowledge, skills, competencies, experience, location, and clearance level, as well as contract-specific affordability and organizational requirements and applicable employment laws. Please note that the salary information is a general guideline only. The projected compensation range for this position is provided within the posting and is based on full-time, 40-hour/week status. Part-time staff receive compensation at an hourly rate. The estimated minimum and maximum displayed represent the broadest range for this position (inclusive of high geographic and high clearance requirements) and are just one component of the LST's total compensation package for employees. ** In compliance with local laws, LS Technologies presents this reasonable compensation range as a guideline for roles in California, Colorado, New York, or Washington D.C." Benefits offered to all employees who work 30+ hours per week: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Annual Leave, and Holidays. About Tetra Tech: Tetra Tech is the leader in water, environment, and sustainable infrastructure, providing high-end consulting and engineering services for projects worldwide. With 30,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. Explore our open positions at . Follow us on social media to learn more about our people, culture, and opportunities: LinkedIn: @TetraTechCareers X (Twitter): @TetraTechJobs #ZR Job Posted by ApplicantPro

Job DescriptionAn Engineering Technician is a professional with 2 – 5 years engineering experience. This individual will provide engineering services on all phases of an assigned project under the supervision of the Project Manager. PRIMARY DUTIES: Perform and/or oversee civil/site design for a variety of projects including parks, municipal infrastructure, athletic facilities, commercial developments. Responsible for scope, schedule, and budget adherence to assigned tasks. Performs routine engineering assignments requiring application of standard techniques and procedures. Works independently on small assignments and assists Senior Engineers on projects. Works closely with other disciplines on multi-discipline projects. Additional duties include participating in building inspections as required.KNOWLEDGE, SKILLS and ABILITIES: Proficient in Microsoft Office Suite (word, excel, PowerPoint) Proficient in AutoCad Civil 3d computer aided design software Excellent written and oral communication skills Ability to multi-task, appropriately prioritize workflow and complete tasks on schedule and within budget Excellent time management skills Ability to solve problems Municipal Land Use knowledge a plusEDUCATION/EXPERIENCE: Bachelor of Science Degree in Civil Engineering with a from an accredited four- year college or universityCERTIFICATIONS/LICENSES REQUIRED Engineer-in-Training (EIT) required Professional Engineer (PE) License is a plus Valid Driver's LicensePHYSICAL DEMANDS AND WORKING ENVIRONMENT:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. This job operates in a professional office environment. The role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax. Work requires frequent and prolonged computer use. The position requires the ability to sit, stand, file, lift and carry files up to 25 pounds. EEO STATEMENT: This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. We are an At Will employer.

Job DescriptionEngineering TechnicianAn Engineering Technician is a professional with 0 - 3 years engineering experience. This position will be responsible to work with a team of engineers for the design and production of construction documents for building facilities of various uses and construction materials, including replacement or rehabilitation for structures. This position will also conduct inspections of existing building facilities, including report preparation. PRIMARY DUTIES: • Works closely with other disciplines on multi-discipline projects., • Additional duties include participating in building inspections as required.KNOWLEDGE, SKILLS and ABILITIES:, • Working understanding of AISC, IBC, ACI, and ASCE 7 design standards., • Proficient in AutoCAD and/or REVIT., • Proficiency in REVIT is a plus., • Proficient in Microsoft Office., • Excellent written and oral communication skills.

Investigate and troubleshoot system integration issues using logs, diagnostic tools, and coordination with software and hardware engineers. The Systems Integration Engineer will develop and maintain integration test plans that detail the sequencing, timing, and technical steps required for TFDM depl

Support version control, rollback planning, and patch management for TFDM deployments. Lead or support the installation, configuration, and validation of TFDM software components on operational hardware at field sites and in lab environments. Lead or support the installation, configuration, and vali

A leading technology partner supporting large-scale modernization efforts in aviation is hiring a Mid-Level Software Engineer to join an established development team.

Job DescriptionDescription: Job Description: SEMCON provides a highly qualified, professional, and responsive technical and managerial workforce to satisfy customer requirements that support the Federal Aviation Administration (FAA)’s mission, vision, goals. Want to be part of our team? SEMCON's company culture aligns enriching career experiences, growth opportunities, and collaborative engagement for all employees resulting in a company value being greater than the sum of our parts. We are seeking a skilled and motivated Software Engineer to join our team. The successful candidate will provide Software Engineering and System support for the Automated Message Handling System (AMHS) and National Airspace Data Interchange Network (NADIN) systems, focusing on software development and maintenance activities. This role requires a technical background and the ability to apply engineering principles effectively. Key Responsibilities: • Develop software solutions utilizing programming languages such as C, C++, and JAVA., • Participate in software maintenance activities to ensure system reliability and performance., • Provide technical support for the development, execution, and evaluation of programs, projects, and systems., • Offer integration support to enhance system interoperability., • Develop and review technical documents and plans to ensure clarity and compliance with standards., • Conduct technology evaluations and provide testing and evaluation support., • Support interoperability testing with other National Airspace System (NAS) systems Required Skills: • Proficiency in programming languages including: C, C++, and JAVA, • Understanding of software development and maintenance processes, • Experience in technical documentation and project planning, • Knowledge of engineering principles related to software development, • Ability to conduct technology evaluations and testing, • Knowledge/experience with Jenkins software build pipeline, • Excellent problem-solving skills and attention to detail, • Strong communication skills to collaborate with various stakeholders A Bachelor's degree and 6-10 years of experience is required. SEMCON will offers a competitive salary and complete benefits package which includes health benefits (medical, dental, vision, and life), 401K with a generous employer match, paid time off, and paid holidays. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. This is an in-person position with a requirement to work on site 5 days per week. Requirements:

Present results to engineer for sign off. Our forward-looking companies lead the way in software-powered workflow solutions, data-driven intelligence, AI-powered automation, and other disruptive technologies. Through precision-engineered measurement solutions, we work with our customers to eliminate

Since 2010 Synergisticit has helped jobseekers get employed in the tech job market by providing candidates the requisite skills, experience, and technical competence to outperform at interviews and at clients.Here at SynergisticIT we just don't focus on getting you a tech job we make careers.In this

You’ll collaborate with a talented engineering team to rebuild backend services and refactor the existing frontend application, using modern technologies.