Trabajos solar electrical en San Francisco, CaliforniaCrear alertas

Job DescriptionMantis Innovation provides managed facility services and turnkey program management with technology-enabled solutions that target the entire building footprint. We look at the entire facility—inside and out—and can impact 70% of what a building operator allocates critical budget dollars toward, including: Strategic electricity and natural gas procurement, renewable energy, and demand response; climate impact reduction and reporting, net zero strategies, and sustainability planning; roofing, solar, HVAC assessment management, pavement, building envelope, data center optimization, and EV charging; lighting/LED retrofits, HVAC/mechanical systems, and BMS/BAS improvements and implementation. As a Controls Tech II and/or III on our team, you will be responsible for installing and servicing Building Automation Systems, including project start-up, commissioning, routine and emergency service, and preventive maintenance. This role will require 100% permanent relocation to one of the following locations ASAP:San Diego, CASeattle, WAAshburn, VALubbock, TX Starting around March 2026 we will need people in:Oregon (city TBD) If you are not open to relocating to one of the areas above, please still apply as we might have other positions that open later with more flexible location options. Responsibilities • Service of existing building control systems., • Startupof complete building control systems., • Install building control components (controllers, panels, conduit, sensors, etc.), • Low voltage control panel building., • Work closely with our installation subcontractors and coordinate work with them to ensure projects are completed on time as per code, standards and contract requirements., • Perform a point-to-point checkout per standard procedures., • Perform software/hardware calibration required for proper equipment and system operation., • Perform low voltage cable installation/termination for small projects if needed., • Take on project commissioning activities to include daily meetings and documenting results. Qualifications, • Has had experience with BMS software; Tridium/Distech is required. Must understand wire sheet programming and logic., • Ability to own a task from beginning to end. Effectively communicating progress and/or issues about assigned task., • Can work both independently and as a part of a team., • Must be able to multi-task, it is very probable you will be assigned multiple tasks over multiple customers at any given time., • Can read schematics (network topologies, electrical one-lines, device wiring drawings, control drawings, etc...), • Familiarity with CAD, construction drawings, • Strong understanding of open protocols (For Example... BACnet IP/BACnet MSTP/Modbus TCP/Modbus RTU), • Knowledge of terminating wire to terminal blocks to include RS-232, RS-485 and CAT 5/6, • Troubleshooting skills, the ability to understand a problem and work toward reasonable solutions, • Maintain proper understandings of code requirements for indoor and outdoor electrical infrastructure, and knowledge of handling higher voltage (120, 240, 480V) for controls purposes, • Basic networking, ability to manipulate pc settings to access, set up and commission devices on a network., • Ability to visit job construction hard hat areas and climb stairs, climb ladders, maneuver in and around pipework and air ducts and work safely near exposed line voltage and low voltage wiring and terminations., • Possess valid state motor vehicle license and possess safe driving record as required by company’s insurance carrier., • Able to pass State and Federal security screening., • Out-of-state travel will be required (estimated to be between 25% - 30% throughout the year), • Understanding of Mechanical and Electrical equipment in a typical Data Center application

Job DescriptionMantis Innovation provides managed facility services and turnkey program management with technology-enabled solutions that target the entire building footprint. We look at the entire facility—inside and out—and can impact 70% of what a building operator allocates critical budget dollars toward, including: Strategic electricity and natural gas procurement, renewable energy, and demand response; climate impact reduction and reporting, net zero strategies, and sustainability planning; roofing, solar, HVAC assessment management, pavement, building envelope, data center optimization, and EV charging; lighting/LED retrofits, HVAC/mechanical systems, and BMS/BAS improvements and implementation. As a Controls Tech II and/or III on our team, you will be responsible for installing and servicing Building Automation Systems, including project start-up, commissioning, routine and emergency service, and preventive maintenance. This role will require 100% permanent relocation to one of the following locations ASAP:Ashburn, VAAtlanta, GALubbock, TX Starting around March 2026 we will need people in:Oregon (city TBD)Washington (city TBD)and possibly California (city TBD) If you are not open to relocating to one of the areas above, please still apply as we might have other positions that open later with more flexible location options. Responsibilities • Service of existing building control systems., • Startupof complete building control systems., • Install building control components(controllers, panels, conduit, sensors, etc.), • Low voltage control panel building., • Work closely with our installation subcontractors and coordinate work with them to ensure projects are completed on time as per code, standards and contract requirements., • Perform a point-to-point checkout per standard procedures., • Perform software/hardware calibration required for proper equipment and system operation., • Perform low voltage cable installation/termination for small projects if needed., • Take on project commissioning activities to include daily meetings and documenting results. Qualifications, • Ability to own a task from beginning to end. Effectively communicating progress and/or issues about assigned task., • Can work both independently and as a part of a team., • Must be able to multi-task, it is very probable you will be assigned multiple tasks over multiple customers at any given time., • Basic proficiency in Microsoft suite (Word, Outlook, Visio, Excel, PowerPoint), • Can read schematics (network topologies, electrical one-lines, device wiring drawings, control drawings, etc...), • Familiarity with CAD, construction drawings, • Strong understanding of open protocols (For Example... BACnet IP/BACnet MSTP/Modbus TCP/Modbus RTU), • Knowledge of terminating wire to terminal blocks to include RS-232, RS-485 and CAT 5/6, • Troubleshooting skills, the ability to understand a problem and work toward reasonable solutions, • Maintain proper understandings of code requirements for indoor and outdoor electrical infrastructure, and knowledge of handling higher voltage (120, 240, 480V) for controls purposes, • Has had experience with BMS software, Tridium is preferred and understands wire sheet programming and logic., • Basic networking, ability to manipulate pc settings to access, set up and commission devices on a network., • Ability to visit job construction hard hat areas and climb stairs, climb ladders, maneuver in and around pipework and air ducts and work safely near exposed line voltage and low voltage wiring and terminations., • Possess valid state motor vehicle license and possess safe driving record as required by company’s insurance carrier., • Able to pass State and Federal security screening., • Out-of-state travel will be required (estimated to be between 25% - 30% throughout the year)

Requisition ID # 171520 Job Category: Maintenance / Construction / Operations Job Level: Individual Contributor Business Unit: Energy Delivery Work Type: Hybrid Job Location: Auburn; Alameda; Alta; American Canyon; Angels Camp; Antioch; Auberry; Avenal; Avila Beach; Bakersfield; Balch Camp; Bay Point; Bear Valley; Belden; Bellota; Belmont; Benicia; Berkeley; Brentwood; Brisbane; Buellton; Burney; Buttonwillow; Calistoga; Campbell; Canyon Dam; Canyondam; Capitola; Caruthers; Chico; Clearlake; Clovis; Coalinga; Colusa; Concord; Concord; Corcoran; Cottonwood; Cupertino; Daly City; Danville; Davis; Dinuba; Downieville; Dublin; Emeryville; Eureka; Fairfield; Folsom; Fort Bragg; Fortuna; Fremont; French Camp; Fresno; Fresno; Fulton; Garberville; Geyserville; Gilroy; Goodyear; Grass Valley; Guerneville; Half Moon Bay; Hayward; Hinkley; Hollister; Holt; Houston; Huron; Jackson; Kerman; King City; Lakeport; Lemoore; Lincoln; Linden; Livermore; Lodi; Loomis; Los Banos; Lower Lake; Madera; Magalia; Manteca; Manton; Mariposa; Martell; Marysville; Maxwell; Menlo Park; Merced; Meridian; Millbrae; Milpitas; Modesto; Monterey; Montgomery Creek; Morgan Hill; Morro Bay; Moss Landing; Mountain View; Napa; Needles; Newark; Newman; Non-PG&E Non-US Off Shore Work Location; Non-PG&E US Work Location; Novato; Oakdale; Oakhurst; Oakland; Oakley; Olema; Orinda; Orland; Oroville; Palo Alto; Palo Cedro; Paradise; Parkwood; Paso Robles; Petaluma; Pioneer; Pismo Beach; Pittsburg; Placerville; Pleasant Hill; Point Arena; Potter Valley; Quincy; Rancho Cordova; Red Bluff; Redding; Richmond; Ridgecrest; Rio Vista; Rocklin; Roseville; Round Mountain; Sacramento; Salida; Salinas; San Bruno; San Carlos; San Francisco; San Francisco; San Jose; San Luis Obispo; San Mateo; San Rafael; San Ramon; San Ramon; Sanger; Santa Cruz; Santa Maria; Santa Nella; Santa Rosa; Selma; Shaver Lake; Sonoma; Sonora; South San Francisco; Springville; Stockton; Storrie; Taft; Tracy; Turlock; Twain; Ukiah; Vacaville; Vallejo; Walnut Creek; Wasco; Washington; Washington D.C.; Watsonville; West Sacramento; Wheatland; Whitmore; Willits; Willow Creek; Willows; Windsor; Winters; Woodland; Yuba City Department Overview Power Generation operates and maintains PG&E's hydroelectric, fossil, solar generation and battery storage facilities, providing approximately 5,300 megawatts of generating capacity for our customers. Our over 900 coworkers are dedicated to delivering safe, reliable and cost-effective generation to California in an environmentally responsible manner. Our hydro facilities include 62 conventional hydro powerhouses, a pumped-storage facility, 98 reservoirs, 168 dams and more than 200 miles of canals and flumes, among other water conveyances. Natural gas-fired plants in operation are Humboldt Bay Generating Station in Eureka; Colusa Generating Station in Colusa County and Gateway Generating Station in Antioch. Several utility-scale solar generation plants also are operated and maintained, as well as PG&E's successful entry into battery energy storage, our Elkhorn Battery facility at Moss Landing in Monterey County.??????? Position Summary Location flexible throughout the PG&E service territory. This position is "hybrid", with the expectation of monthly office visits (subject to change due to business needs). The Power Generation Inspector plays a critical role in providing construction inspection services, contractor safety oversight, and environmental compliance for all Hydro Generation departments including project management, outage management, contract management, engineering, diving, construction, land management and operations and maintenance. This job oversees contractor's scope of work performed and associated work evolutions, corrective actions and trends, and develops and shares lessons learned from contractor incidents. This role possesses specialized field experience to engage our contractors and subcontractors, growing our collaboration with them, and effectively managing their daily performance on safety and quality. The role includes responsibility of timely notification to appropriate stakeholders about any safety, quality, scope, schedule and costs issues. This position will liaise with the corporate contractor safety program team as the PG&E site representative to ensure Power Generation compliance with established company contractor safety standard. PG&E is providing the salary range that the company in good faith believes it might pay for this position at the time of the job posting. This compensation range is specific to the locality of the job. The actual salary paid to an individual will be based on multiple factors, including, but not limited to, specific skills, education, licenses or certifications, experience, market value, geographic location, and internal equity. Although we estimate the successful candidate hired into this role will be placed towards the middle or entry point of the range, the decision will be made on a case-by-case basis related to these factors.? A reasonable salary range is:? Bay Area Minimum: $?105,000 Bay Area Maximum: $?169,000 &/OR? California Minimum: $?100,000 California Maximum: $161,000 Responsibilities • Performs field inspection services on complex, fluid and/or longer duration work activities for both internal and contractor-performed jobs within the PG&E Hydroelectric Generation System. Manages safety and quality of construction activities to ensure compliance with applicable plans, specifications, standards, codes and agency requirements, • Verifies and enforces PG&E contractor safety standard and utility contractor oversight procedure at the jobsite including enforcing contractor-submitted site-specific safety plans, completing field safety observations, validating third-party administrator contractor grades and badging requirements, completing safety performance evaluations and other field oversight responsibilities., • Conducts and participates in worksite safety orientations, daily tailboards and Job Safety Analyses (JSA) development and review to ensure all hazards and mitigations are addressed for work performed, including Infrequently Performed High Risk work., • Works with Corporate Safety, project management, engineering, construction or O&M personnel in the field to develop and coordinate corrective or mitigating actions as required to abate hazards and restore contractor personnel safety and compliance at the jobsite., • Provides oversight on air quality monitoring and abatement activities such asbestos, lead-paint and other regulated materials to ensure company, utility, and agency environmental compliance. Works with work groups to ensure permit requirements are satisfied and required documents are retained., • Reviews, interprets and understands executed contract, including verifying inclusions and exclusions of scope of work, technical specifications, contract payment terms, field changes, and labor, equipment and material (LM&E) documentation., • Works with project management, engineering, construction or O&M job Leads to communicate job progress, status, changes, issues and risks. Liaises with contractor work supervisor in the field to coordinate and decide on appropriate actions to maintain conformance with the executed contract., • Prepares and maintains field documentation through construction phase including detailed inspection reports or daily logs, progress photographs, as-built markups/redlines and observations. Professionally communicates and facilitates Request-For-Information (RFI) transactions between onsite contractor and offsite PG&E stakeholders (engineer, project lead)., • Performs Qualified Electrical Observer (QEO) duties for non-electrical workers working near energized equipment including reviewing and interpreting electrical diagrams, schematics and mechanical drawings, • Performs field testing on civil infrastructure including concrete, asphalt, structural steel, grouting and engineered fill. Determines quality, materials and workmanship through inspection, and conformance with specifications. Performs associated laboratory testing (offsite) to support field test results Qualifications Minimum Qualifications: • High school diploma or general education degree (GED) or equivalent, • Valid California Class C driver's license, or equivalent, • 6 years of journeymen or equivalent experience in the construction industry, • Physical demands required for the successful performance of this job include standing and/or walking for long hours in a day on uneven and steep terrain, and possibly during variable weather conditions., • Must be comfortable living/working in remote/rural areas., • Travel within PG&E's Power Generation Hydro service territory, up to 100% of time. Desired Qualifications: • OSHA Safety Associate Certificate, • American Concrete Institute (ACI) Certification for Field Concrete Testing, • Certified Welding Inspector (CWI) Certification, • CPR/First Aid certified, • Manufacturer certification for Transportation and Use of Portable Nuclear Gauge, • Experience leading a work crew of craftsmen (e.g., Sub Foreman, Working Foreman or equivalent experience)., • Experience in quality assurance, lab testing and/or hydro generation industry., • Experience with field testing on civil infrastructures., • Experience working under deadlines in a dynamic environment that often lacks predictability due to external influence., • Experience leading teams and/or contractors., • Knowledge and understanding of current local, state and federal regulations pertaining to construction and contractor safety., • Knowledge and understanding of PG&E and industry-specific electrical standards, PG&E Contractor Safety Program, ISNetWorld and Gold Shovel, and other relevant safety policies, theories, concepts, methods, best practices and techniques., • Extensive and substantial practical knowledge and experience in heavy rotating equipment operation, mechanical design, material selection and repair techniques., • Proficient in the use of various computer programs, and willingness to embrace new technology as it becomes available., • Proficient in technical writing to facilitate understanding of procedures or service., • Proficient at conducting hazard evaluations for complex jobs and recommending appropriate controls., • Proficient in developing, assisting, or drafting communications to all levels of leadership., • Demonstrated ability to inspire others and get them to take action without always using position or authority.

Job DescriptionWe are looking for a Development Engineer to provide comprehensive engineering support for our distributed energy and microgrid projects. Our projects typically include managing a variety of DER and microgrid assets – such as solar, energy storage, controls, and reciprocating engines. This role will report to our Manager of Development Engineering and will be a hybrid role based out of our Oakland, CA, or Santa Monica, CA offices.Key responsibilities will include: • Create electrical and physical designs for microgrid and DER systems, accounting for existing electrical infrastructure, AHJ requirements, and other site constraints, • Utilize your strong technical and communication skills to identify and communicate technical constraints and possibilities to other internal and customer stakeholders., • Work extensively with our Business Development (BD) teams to evaluate and develop the right technical solutions., • Work with the BD, execution, and commercial teams on specific projects to ensure the Microgrid integration is technically sound, practical, and cost-effective. This includes working with existing service entrance one-line drawings or creating new ones to provide the best design interface for functionality and cost., • Investigate the interconnection, which includes submitting interconnection applications and completing modifications to existing design concepts that are applicable to each site., • Work with switchgear manufacturers (and other OEMs) like Schneider Electric to ensure switchgear designs meet project requirements, including site constraints and utility requirements, within cost and schedule constraints. This includes working at voltage levels of 34.5kV, 23kV, 13.8kV, 4160V, 480V, and 208V, depending on site and system size., • Provide significant input to the solar, battery, and generator designs to optimize performance, reliability, and sustainability for each customer site., • Collaborate with the rest of the development engineering team, as well as other internal stakeholders, to continually improve templates and processes and enable continuous improvementThe Ideal Candidate, • 5+ years of experience in the design and construction of power/generation/renewable energy projects, • Thorough technical understanding of distributed energy technologies, including some combination of solar, battery, and reciprocating engines/turbines, • Deep understanding of rotating power with reciprocating engines in the 200 to 2000kw size range per engine is preferred., • Understanding of onsite power generation, including parallel operation with the utility bus as well as with other DERs, both in grid parallel mode and island mode operations., • Solid understanding of the utility side of the interconnection., • Knowledge of the various DER power sources within the Microgrid and how they best interface with the utility to provide a more efficient system., • Knowledge of emissions from the utility side as well as each of the DERs., • Knowledge of systems controls for the DERs and how they can be utilized to accomplish specific operating goals while part of the Microgrid. These goals provide economic return to us and the customer., • Strong communication skills, including the ability to communicate with technical and non-technical people to make projects work., • A BS in Engineering is required; a BS in Electrical Engineering with a focus on the power side is preferred, • PE in power or progressing towards that license is preferred

Job DescriptionThe RoleWe are looking for a Product Engineering Manager to lead a team that provides power systems engineering expertise for off-grid and grid-tied microgrids and data centers. Our projects typically include managing a variety of DER and microgrid assets – such as solar, energy storage, switchgear, controls, and reciprocating engines. You will report to our Chief Technology Officer and will ideally be a hybrid role based out of either our Ridgewood, NJ, NYC, Los Angeles or Oakland, CA offices. Key responsibilities will include: • Provide technical expertise to develop core technologies that our project teams will utilize to deliver distributed energy solutions., • Leverage electrical and power engineering knowledge to define best practices and publish internal standards and guidelines to ensure high-quality microgrid projects are engineered well for our clients., • Review project-specific electrical designs and the sequence of operations for controls., • Provide technical oversight and guidance on relay protection settings and power systems analysis., • Define long-term technical vision and product roadmaps for microgrid design and core technologies., • Work with the business development, execution, and commercial teams to ensure our microgrids are appropriately integrated into the customer site and are technically correct, practical, and cost-effective., • Utilize strong technical and communication skills to interface with all aspects of the business, vendors, and customers., • Support, build, and grow a diverse team., • Provide mentorship and leadership to team members., • Guide individuals in setting clear goals and provide regular feedback on performance to foster career growth., • Coordinate project staffing and prioritization., • Implement new tools and practices as needed to make the team more effective.The Ideal Candidate, • 10+ years of power systems experience with 3+ years of experience building and leading technical teams, preferably in a high-growth company., • Thorough technical understanding of distributed energy technologies, including solar, battery, switchgear, and reciprocating engines/turbines., • Understanding of rotating power with reciprocating engines in the 200kW to 5MW size range per engine. This includes parallel operation with the utility bus as well as with other DERs, both in grid parallel mode as well as island mode operations., • Understanding of switchgear and relay protective settings (SEL, Beckwith)., • Experience in medium voltage switchgear, including 13.8kV, 23kV, and 34.5kV., • Core competency in transformer design, short circuit analysis, grounding schemes, and power systems analysis., • Strong knowledge of the various DER power sources within the Microgrid and how they best interface with the utility to provide a more efficient system., • Demonstrated expertise and understanding of the US power markets, the interconnection process, and requirements., • Knowledge of systems controls for all the DERs and how they can be utilized to accomplish specific operating goals while part of the Microgrid., • Strong communication skills, including the ability to communicate with technical and non-technical people to make projects work., • Understanding of relevant building, electrical, civil, etc., codes is a plus., • BS in Electrical Engineering with a focus on the power side., • PE in power and electrical engineering is preferred., • ·Experience at an engineering/consulting firm is a plus.

Job DescriptionBenefits: • Company car, • Dental insurance, • Health insurance We are an end-to-end Renewable Energy provider, offering products to commercial and enterprise clients in EV Charging solutions, Fleet Electrification, Solar Micro-grids, Energy storage, Hydroponic farming and Rain Water/Grey Water collection systems. We have been experiencing tremendous growth in all these areas and operate under several government rebate programs that ensure a steady and reliable flow of revenues. Our company handles the entire flow of providing these products and services beginning with Sales, Provisioning, Design and Engineering, Contracting and Construction, Servicing and Maintenance. We are a licensed C-10 contractor and operate construction crews in various areas of CA and soon the rest of the U.S. Overview of Position We are looking for experienced Foremen for several jobs in CA. Job tasks include the following Job Duties & Responsibilities: • Manage a crew of 5 10 workers;, • Read and interpret drawings, blueprints, schematics/ electrical code specifications to determine layout of equipment installations, • Supervise and manage trenching for utility conduits, directing operators on backhoes, backfilling and underground scanning, • Supervise and manage pouring and finishing concrete pads for switchgear, Electrical Chargers, Bollards, directing paving, and overhead EMT conduit placement, • Supervise and manage Electrical resources on the job, • Arrange and coordinate safety meetings;, • Delegate tasks and responsibilities to crew members;, • Be the point of contact with the employers site superintendent;, • Supervise and train apprentices on the job, as required;, • Maintain a safe work environment by adhering to all company guidelines and OSHA safety requirements and also through reporting violations of policies, procedures and guidelines to immediate supervisor;, • Controlling inventory on truck, job-site, and in/out of stock (for active jobs);, • Organize and maintain material lists for your crew;, • Gathering required material;, • Responsible for maintaining company tools;, • Inspect jobs upon completion and ensure areas are clean;, • Work with building principals and supervisors to complete projects;, • Respond to emergency calls as needed;, • Updating work logs, client accounts, and handling other administrative duties., • Communicating with clients in a professional, courteous manner at all times., • Take AHJ inspections and follow up with the utilities.Secondary Functions, • Interpersonal Skills - Focuses on solving conflict, not blaming; maintains confidentiality; listens to others, is proactive in resolving issues., • Written Communication - Write clearly and informatively; conscious of audience and varies writing style accordingly, able to read and interpret written requirements., • Contributes to building a positive team spirit, • Time Management: Prioritizes and plans work activities, uses time efficiently, • Professionalism At all timesWhat we Offer:, • Salaried position, • Up to Two weeks of PTO, • Medical and Dental, • Company Truck with company credit card, • At least two crews with one foreman each, • Room for growthZero Impact Builders is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

Job Description Are you a seasoned professional in electrical construction with a knack for project management? We're searching for a talented Electrical Project Manager to join our dynamic team. If you're ready to take on challenging projects and make a significant impact, this role is for you! Who are we? We are Anvil Power; a civil engineering and electrical construction company founded in the Bay Area and are now serving clients throughout the Western United States. Our areas of expertise include: Pumpstations, Wastewater Treatment Plants, Water Treatment plants, Solar, Bus Charging stations and design-builds. Key Responsibilities: Lead in the planning, design, and execution of electrical projects from conception to completion. Provide technical expertise and guidance on complex electrical systems and components. Collaborate closely with clients, architects, contractors, and internal teams to ensure project success. Oversee project budgets, schedules, and resources to meet quality, safety, and regulatory standards. Conduct thorough inspections, testing, and commissioning to ensure project integrity and performance. Requirements: Extensive experience in electrical construction, with a focus on project management. Proficiency in CAD software and other relevant engineering tools. Strong leadership skills and ability to motivate and inspire team members. Excellent communication, problem-solving, and decision-making abilities. Benefits: Competitive salary and comprehensive benefits package. Opportunities for professional growth and career advancement. Stimulating and collaborative work environment with a focus on innovation. Chance to work on diverse and exciting projects that make a difference. Join us in our commitment to excellence and innovation in electrical construction! If you're ready to take your career to new heights and lead impactful projects, apply now for the position of Electrical Project Manager. Powered by JazzHR 0r3BtgRZhL

Job DescriptionSalary: dcbel Inc. () designs and sells residential products to make clean, efficient, and sustainable energy accessible to all because everyone in the world deserves energy without compromise. dcbel is at the leading edge of the residential energy revolution. Its products enable decentralized energy consumption and production through its vertically integrated suite of energy hardware and software products, and their supporting infrastructure. Our flagship product, dcbel Ara, is a Home Energy Station that gives everyone ownership over their energy supply by using solar power to charge their EV and power their home, unlocking their EVs battery for blackout protection, backup power (V2H) and grid services (V2G), and optimizing the energy flow between their solar panels, EVs, stationary battery and the grid. The opportunity dcbel is looking to hire a Field Engineer - Residential Energy to work in dcbel's Revenue Team. Successful candidates will play a pivotal role in enabling installer channel sales by accelerating the scale up of dcbel's installer network by having technical training directly in the field, all over Canada and US (East coast) wherever installer customers may be located. Main responsibilities • Enable installer channel sales, • Provide on-customer premise training of new installers during onboarding, • Provide technical support during installer sales outreach, • Provide ad hoc technical support during demonstrations and in other partner channels as required Key requirements • Bachelors in Engineering from top tier universityor equivalent., • Demonstrable hands-on field experience supporting selling and installing of new/innovative product in the residential and/or energy and troubleshooting, • Working knowledge of Canadian and US electrical code, • Working knowledge of power electronics;, • Working knowledge of IoT communication protocols Profile • Some knowledge of EV charging communication protocols (ISO 15118) and DER integration protocols (IEEE 2030.5, OpenADR) are a strong plus;, • Entrepreneurial mindset, result oriented and strong EQ., • Great communication and presentation skills, • Ability and willingness to travel; 85%+ in Canada and in the US What's in it for you • Full benefits package including Health insurance, virtual healthcare, employee stock options plan, and more., • Be part of a company that is backed by numerous globally respected investors and has world-changing patents in an industry changing for the first time in history., • Grow your professional experience amongst blue chip partners and a close-knit team of committed and experienced energy experts who deeply care about the work they do., • Parking is available onsite or with our employer commute program a short walking distance from Metro Namur.

Job Description About the Opportunity: Saratech is seeking a Mechanical Engineer to support the design, analysis, assembly, and testing of advanced spacecraft systems for a cutting-edge aerospace program. This role offers hands-on involvement across the full hardware lifecycle, from concept through environmental testing, in a fast-paced engineering environment. Salary Range: BS or MS in Mechanical Engineering, Aerospace Engineering, or related field * 3+ years of spacecraft mechanical design and integration experience (or equivalent) * Proficiency with CAD software (NX preferred) * Experience with structural and thermal hand calculations (FEA preferred but not required) * Experience designing and fabricating composite and/or metallic components * Ability to generate engineering drawings with appropriate GD&T * Ability to read and interpret engineering drawings and schematics * Strong problem-solving and critical-thinking skills * Self-motivated with the ability to prioritize tasks in a dynamic environment * Strong teamwork and communication skills Duties and Responsibilities: • Design, analyze, procure, assemble, and test spacecraft structures, mechanisms, and solar arrays Define loads, interfaces, and functional requirements at component and system levels * Select materials and mechanical components suitable for space environments * Apply Design for Manufacturing (DFM) and Design for Assembly (DFA) principles * Contribute to spacecraft-level mechanical architecture * Collaborate with electrical engineers to integrate avionics and wiring harnesses * Perform mechanical and/or thermal analyses using hand calculations and analysis tools * Generate manufacturing drawings, manage bills of materials (BOMs), and source components * Participate in hands-on prototyping, assembly, and functional testing * Support sub-assembly and vehicle-level environmental testing (vibration, thermal vacuum, etc.) * Design ground support equipment including assembly jigs, test fixtures, and mass offload systems * Support vehicle integration efforts across engineering teams * Assist with improvements to manufacturing, test, and integration facilities * Identify opportunities to improve operational efficiency Skills and Abilities: • Experience with spacecraft environmental testing (launch vibration, thermal vacuum), • Passion for hands-on hardware development, • Experience with composite structures, • Proficiency with NX, • Experience with Thermal Desktop and/or NX Nastran, • Machine shop prototyping experience (CNC mill/router, mill, lathe, laser cutter, 3D printer), • Complies with all organizational policies and procedures, • Maintains strict confidentiality of all customer and/or employee information to assure customer and/or employee rights are protected, • Adheres to policies regarding notification of absence and PTO requests, • Attends all mandatory management and staff meetings, • Represents the organization in a respectful and professional manner, • Attend and comply with annual health, safety, training, and education requirements, • Physical demands:, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • The ideal candidate must be able to complete all physical requirements of the job with or without a reasonable accommodation., • Must be able to remain in a stationary position 50% of the time. The person in this position needs to occasionally move about inside the office to access file cabinets, office machinery, etc., • Constantly operates a computer and other office productivity machinery, such as a calculator, copy machine, and computer printer., • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Follow detailed complex directions, reason and problem solve., • The person will frequently communicate and converse with other staff. Must be able to exchange accurate information in these situations., • Company participates in E-Verify., • Company is committed to providing equal employment opportunity without regard to race, color, religion, sex, sexual orientation, national origin, age, disability, or any other protected status with respect to recruitment, hiring, promotion, and other terms and conditions of employment., • Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time;, • This description reflects managements assignment of essential functions, it does not proscribe or restrict the tasks that may be assigned Insurance: All full-time regular employees (and dependents) are eligible to get medical, dental, vision coverage. Employees also can buy up on benefits like FSA, HSA, Life insurance, long and short-term disability. Comprehensive health care and wellness plans Retirement Plan: All employees can enroll in the company's 401k with company matching. Paid Time Off: All full-time regular exempt employees are eligible for our Discretionary Time Off vacation policy after 90 days from their start date, Discretionary Time Off plan is a non-accrual plan for employees. All full-time regular non-exempt employees are eligible for our Paid Time Off Plan policy after 90 days, Paid Time Off plan is an 3.33 hours accrual per pay period for employees. Paid Time Off: All full-time regular exempt employees are eligible for our Discretionary Time Off vacation policy after 90 days from their start date, Discretionary Time Off plan is a non-accrual plan for employees. All full-time regular non-exempt employees are eligible for our Paid Time Off Plan policy after 90 days, Paid Time Off plan is an 3.33 hours accrual per pay period for employees. Paid Holidays: All full-time employees will receive 8 paid holidays per year. Full-time non-exempt employees receive an extra floater holiday per year. Paid Sick Time: All full-time and part-time employees will receive 40 sick hours per year or minimum sick time required by the state. NOTE TO STAFFING AGENCIES AND RECRUITERS: Saratech does not accept unsolicited resumes from any external agency for the placement of any position. Unsolicited resumes submitted by agencies and received by Saratech will be considered the property of Saratech and may be contacted and engaged with directly by Saratech. Saratech will not pay a placement fee or any other fees to any third-party agency, firm, or recruiter who is not specifically retained with a signed fee agreement by Saratech Human Resources to conduct a candidate search. Please do not forward unsolicited resumes to our website or to any Saratech employee. Saratech will not be responsible for any fees associated with unsolicited resumes. EQUAL EMPLOYMENT OPPORTUNITY NOTICE: Paydarfar Industries, Inc. dba Saratech is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, disability, protected veteran status, or any other basis protected by applicable federal, state, or local law. #HI Subject to background check

Job Description Solar Sales Business Development - Commercial & Multifamily Company: Our client is a well-established solar company with a fantastic reputation for excellent service and on-time project completion. Opportunity: We are currently seeking a dynamic Commercial/Multifamily Solar BDM, a proven relationship builder, and hunter. The successful Commercial Solar Sales Business Development Manager will drive and manage multifamily/commercial solar projects throughout the Northern California region. The ideal candidate will have a strong background in solar energy sales and a proven track record of developing new business opportunities with commercial and multifamily building owners, developers, and general contractors. Target project sizes range between 100kW to1MW, new construction. The Commercial BDM will manage the entire sales cycle, from lead generation to contract negotiation and handover to construction. Responsibilities: • B2B Sales. Identify, generate, and pursue sales leads for commercial and multifamily solar projects throughout Southern California., • Engage with customers and other relevant trade partners as the main point of contact during the projects. Develop and nurture relationships with key stakeholders, including property owners, developers, general contractors, project managers and decision-makers., • Generation of leads and maintaining close client relations, responsible for finding new leads and knocking on doors., • Own and drive all commercial and large-scale multifamily apartment projects, including carports., • Create and present compelling solar and roofing packages for potential clients., • Organize and host lunch-n-learns with architects, builders, GCs, and other stakeholders., • Collaborate with sales engineering and design to develop customized solar solutions., • Collaborate with internal teams, including estimating and project management, to ensure smooth project execution., • Stay involved throughout the execution phase and ensure the customer is content., • Analyze market trends and identify new opportunities in the commercial solar sector., • Achieve and exceed sales targets and revenue goals. Present progress regularly., • Must have direct solar sales experience in NorCal with the proven ability to build and maintain close client relationships for new and repeat business., • Minimum of 5+ years of commercial and/or multifamily solar photovoltaic (PV) successful solar sales records with a focus on commercial projects. Ideal candidate will have B2B new construction carport and multifamily experience., • Bachelor’s degree in business, engineering, or a related field preferred., • Must have excellent communication, presentation, and negotiation skills with a team player attitude, working with cross-functional teams., • Go-getter, can-do attitude, willingness to roll up sleeves, hunt, and knock on doors to find B2B leads. Willingness to hit the road constantly in Northern California to cover large sales territory and client base as needed., • Must have a commitment to excellent customer service, high ethics, and integrity., • Must have strong problem-solving skills, • Proven ability to multitask while meeting deadlines and keeping projects within budget, • Must have strong organizational and record-keeping skills, • Knowledge of commercial and residential building codes - AHJ, • Solid understanding of Title 24 solar requirements. Knowledge of multi-family PV interconnections as well as Virtual Net Energy Metering (VNEM) and NEM, • Knowledge of 3-phase electrical system, • Knowledge of commercial solar equipment, including panels, racking, inverters, and batteries, • Knowledge of all system types: tilt and flat roof mount, ground mounts, carports, ballasted, and hybrid systems, • Knowledge of electrical code, • Strong understanding of finance, solar billing, and CA regulations, • Medical, Dental, Vision, 401(k) Salary DOE plus generous commission. The compensation listed below is salary plus bonus. Negotiable for the right candidate

Job Description Do you often provide ideas that are outside the box? Do you find yourself re-imagining what is possible and push the envelope to set a new standard? If so, we want you to join our team! As a Solar & Battery Storage Project Developer at Centrica Business Solutions, you will assist in the development of solar and solar and storage projects across North America. The Solar & Battery Storage Project Developer will work closely with business development, management, engineering, project management, and construction staff to identify, assess and structure technical and financial solutions for customers' renewable and energy efficiency needs. The Solar Developer will lead the project through Pre-Construction due diligence to contract. The Solar & Battery Storage Project Developer possesses a strong technical aptitude and the communication and business acumen to translate customer needs into technical guidelines. Open to flexible work schedules working fully remote or hybrid but must be able to travel occasionally. Preferably looking for someone to be near the following locations: • California We promote a FlexFirst approach which empowers our employees to take ownership of their work and maintain a positive work/life balance. Our Solar & Battery Storage Project Developers contribute to the team by: • Creating and managing cashflow models to capture all revenue streams specific to solar and storage projects., • Assisting in management of incentive program enrollment for all projects, track timelines to ensure completion within target deadlines, and submit final documentation to secure program funding., • Coordinating with the project development team and with the financing partner, communicating project updates and milestones achieved, providing transparency, and assisting in document sharing., • Overseeing and/or performing the Helioscope design and budgeting of projects., • Auditing sites as needed for PV solar installation suitability, environmental limitations, structural limitations, etc., • Developing professional quality proposal content for technically complex, multi-site PV solar and battery storage systems (BESS) installations., • Managing 3rd party vendor relationships and Scope of Work/proposals. (i.e. Electrical and Structural partners) ., • Developing proposals, reports and presentations in collaboration with the Solar Analyst., • Networking within the industry. The core components of success are (i.e. must haves): • Bachelor’s degree in mechanical or electrical engineering, Business, or a related field. OR Bachelor’s in Distributed Energy/Generation., • 2+ years of work experience in the solar industry and or Engineering and Operations., • Experience in commercial and industrial Solar projects is required with demonstration of full life cycle project experience from concept to performance. A clear set of completed solar projects that have been screened, audited, designed, installed, interconnected and commissioned with Permission to Operate., • Experience in renewable financial modeling: demonstrated ability to maintain Excel based energy modeling., • Understanding of construction of solar PV and BESS projects., • Helioscope modeling skills (preferred), • Good technical skills relating to Behind the Meter interconnection, inverters, racking, and overall system design for solar PV projects ranging from 100kW to 5MW DC., • Past experience and an up-to-date knowledge of best practices as they relate to solar and storage projects (preferred), • Valid Driver’s License; Travel required with employee’s automobile. Our Team and Culture: We offer a culture filled with collaboration, passion, reliability, trustworthiness and more! We don’t just talk the talk but we actually walk to walk here and can show this through our employee feedback – check it our yourself to see what employees are saying: • High level of employee engagement, • Trust in leadership, • Senior leaders listen and act, • Wellbeing, • Employees feeling valued, • Strong focus in health and safety, • Strategy & direction What we do: Digitalization and climate change mean organizations need to be more energy efficient and resilient to limit their impact on the environment while maintaining control of their energy spend. At Centrica Business Solutions, we deliver integrated energy solutions that balance profitability and sustainability. By bringing together the right combination of technologies and approaches, we help organizations get the most value from their energy and energy infrastructure, helping them solve their energy challenges and harness new opportunities in a changing world. As an Energy Service Company (ESCO), our broad portfolio includes: • Energy Efficiency Solutions, • Solar and Energy Storage, • Electric vehicle and battery storage solutions Our benefits and perks: At Centrica Business Solutions, we ensure you are supported and valued. To help do this, we offer a competitive compensation and benefits package. Some of our benefits & perks include: • Medical/Dental/Vision Insurance, • HSA, with company match, • FSA/DCA, • Paid Time Off, • 401(k), with company match, • Life Insurance, • Accident Insurance, • Employee Wellness Program, • Fitness Reward Program, • Employee Training and Development Opportunities, • Casual attire with professional and fun work environments, • Flexible/hybrid work opportunities, • Fungineering (We Engineer the Fun!) The US base salary range for this full-time position is $110,000-$140,000 + bonus + benefits. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Your recruiter can share more about the specific salary range for your preferred location and expectations during the hiring process. Please note that the compensation details listed in US role postings reflect the base salary only, and do not include bonus, commission, or benefits. Centrica Business Solutions is an Equal Opportunity Employer and as such, does not discriminate in its hiring or employment practices.

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit . Your Impact We are searching for a skilled and motivated EV Charging Field Service Electrician. This key role is responsible for the onsite repair and maintenance of EV charging stations in a specific geographic region, including but not limited to site safety, electrical system maintenance/repair, site field reports, and other duties as required to properly maintain and operate the site within the contractual requirements. This role must be able to work independently with little to no supervision and will be required to work in the field under various conditions. Core Responsibilities • Perform OEM testing, troubleshooting, repairs, and upgrades/ revisions to a broad range of equipment, ranging from Level 2 Electric Vehicle (EV) chargers to DC Fast Chargers., • Perform testing on equipment, including but not limited to; insulation testing (megger testing), thermal imagery, torque tests, and performance evaluations., • Troubleshoot system performance issues and locate/isolate ground faults., • Work closely with the Planning and Scheduling team to ensure maintenance schedules are adhered to and work orders are completed accurately and on time., • Review site manuals and drawings to ensure proper service and maintenance of equipment., • In fieldwork including electrical and mechanical preventative and corrective maintenance of site equipment, site field reporting, work order completion, and other work as needed. Specific duties may vary or evolve over time based on business and client needs. Core Experience • Electrical – Certified Electrician (Journeyman level) from a relevant state (REQUIRED)., • 2+ years' equivalent experience in servicing electrical power equipment in the commercial or utility energy field and/or formal electrical training., • Strong electrical, electronic, and mechanical troubleshooting skills. Technical knowledge of Electric Vehicle (EV)chargers, solar power installations, or other applicable power electronics is preferred, but not required., • Experience using a Computerized Maintenance Management System (CMMS) to generate, track, and complete site work requirements., • Strong Microsoft Office skills., • Ability to analyze and resolve problems independently with a high level of results orientation., • Typical schedule consists of approximately 10-hour workdays., • Paid port-to-port, including travel time between job sites., • Company vehicle provided for all work-related transportation., • All tools and equipment supplied by the company., • Comprehensive on-the-job training provided., • This role requires working in all elements, depending on job location, time of year, heat, cold, rain & snow (depending on geographic region for the role)., • Working around high voltages and currents., • Wear personal protective equipment (PPE), always including a hard hat and safety glasses., • Repetitive use of legs, arms, hands, and fingers. At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$35—$46 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at !

Job DescriptionDescription: About GRID Alternatives GRID Alternatives is a national leader in making clean, affordable solar power and solar jobs accessible to low-income communities and communities of color. GRID is an entrepreneurial, high-growth non-profit organization that provides direct solar installation and project development; clean mobility options; workforce training and service-learning opportunities; and low-income solar policy advocacy. Our Vision: a rapid, equitable transition to a world powered by renewable energy that benefits everyone. Our Mission: to build community-powered solutions to advance economic and environmental justice through renewable energy. What it's like to work at GRID… At GRID, we care about each other and know that each employee has a whole self that includes life outside of work. Our culture supports learning, growth and well-being of all of our team members. Summary of the role: The Commercial Solar Development Engineer will play a key role in the development of solar PV and storage projects in the 25 kW-10 MW range. They will support project development with site analysis, pre-design, cost estimation, and proposal development. The position will work directly with the Commercial General Manager, Director of Commercial Business Development, and the Headquarters Design Team. What you will be doing (essential responsibilities): • Collaborate cross-functionally with project developers, project managers, procurement, design engineers, clients, and construction teams to define project specifications and develop accurate cost estimates for commercial solar PV rooftop, carport, and ground-mount systems, energy storage solutions (BESS), EV charging infrastructure, and associated electrical upgrades., • Develop detailed project cost estimates using Excel, ConEst, or comparable estimating tools, incorporating labor, material, subcontractor, equipment, logistics, and contingency analysis., • Utilize HelioScope, AutoCAD, and Bluebeam to create early-stage conceptual and preliminary designs to support feasibility analysis, proposal development, value engineering, and pricing accuracy., • Support scope development, cost validation, and pricing analysis for change orders on projects under contract., • Partner with Project Management, Design & Engineering, and Interconnection teams to ensure seamless project handoff post-contract, including documentation of assumptions, exclusions, and risk considerations., • Serve as a technical resource to the Design and Project Development teams on electrical code, building code, fire code, utility interconnection requirements, and Authority Having Jurisdiction (AHJ) standards., • Participate in internal technical reviews to align early-stage design assumptions with constructability, permitting requirements, and utility standards., • Investigate scope of work, drawings, and other RFP documents to develop a thorough understanding of RFP requirements, • Review data and plan sets to determine material and labor requirements and perform accurate take-offs., • Manage relationships with subcontractors and vendors to obtain competitive quotes Requirements: Your areas of knowledge and expertise... • 4+ years of solar PV industry experience including energy storage systems, • 2+ years of commercial estimating experience for both retrofit and new construction sites, • Demonstrated experience estimating commercial solar PV systems including rooftop, carport, and ground-mount applications, as well as battery energy storage systems (BESS) and associated electrical infrastructure., • Proficiency in developing conceptual layouts and pre-construction designs using HelioScope, AutoCAD, and Bluebeam to support accurate cost modeling and proposal development., • Advanced Excel skills with the ability to build and maintain complex cost models and scenario analyses., • Experience using ConEst or similar electrical estimating software preferred., • Strong understanding of NEC, CBC, fire code setback requirements, and utility interconnection standards as they apply to commercial solar and storage systems., • Experience coordinating with procurement teams to align equipment selections with cost targets and availability., • Strong organizational skills with the ability to manage multiple bids and development projects simultaneously under tight deadlines., • Strong understanding of contract documents and language to effectively mitigate risks, • Strong analytical and problem solving skills and attention to detail, • Excellent teamwork and communication skills, • Experience with Salesforce.com or other CRM database systems, • Experience with multifamily construction preferred Benefits and how we take care of you Compensation: The compensation range for this fulltime position is $95,000-$100,000. The base pay that will actually be offered will vary depending on job-related knowledge, skills, location, experience and take into account internal equity. Benefits: Medical, Dental, Vision/Eye Care insurance, 5 weeks paid time off (PTO),13 paid holidays, Commuter Checks, 403b Retirement Plan, Employee Assistance Program (EAP), Flexible Spending Account (FSA), Health Savings Account (HSA), STD, LTD, and AD&D insurance Where you will sit & the places you may go… The ideal candidate will sit in within the U.S, Remote. This position may require up to 25% out-of-town travel to regional offices and special projects such as org-wide celebrations, team building exercises, etc. Availability to work nights and weekends may very rarely be required. GRID Alternatives may provide vehicles for work travel and/or travel reimbursement for personal vehicle use. In this instance, applicants must hold a valid driver’s license and have a good driving record. Important to note for California applicants: **Hired CA candidates must be able to pass a screening for drugs that are illegal in the state of California, including: amphetamine, cocaine metabolite, opiates, and PCP. Reasonable Accommodation for Job Seekers with a Disability: If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to: Ready to Apply? Submit a resume describing your interest. Due to the high volume of inquiries, mailed and emailed applications are not accepted. GRID Alternatives provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, national origin, age, disability or genetics. Because we value EID at GRID Alternatives, we encourage folks from all backgrounds to apply, even if you do not meet all of the preferred qualifications. Every member of GRID Alternatives must be dedicated to participating in the organization's equity, inclusion, and diversity (EID) work.

Job DescriptionAbout the Team and the Role The Ground Systems team is responsible for all of the hardware on the ground that enables our Zips to take off, fly, land and prepare for their next mission. We are developing a ubiquitous infrastructure solution for drone-based logistics, akin to what the solar industry has achieved with solar panels deployed worldwide. Our goal is to develop elegant integration solutions that are modular, cost effective, and adaptable to both new and existing building structures and sites worldwide for a variety of customers making drone deliveries. Our team designs large steel towers that hold our docks. Outside of providing structural support, the towers include the mechanisms, actuators, and harnessing that support our docks' charging infrastructure and transmit data. What You'll Do As a Senior Mechanical Design Engineer, you will use engineering fundamentals to develop innovative products for our ground systems infrastructure. This will be centered around welded steel towers that are a few stories high. We're looking for an engineer that does not let "how it is normally done" artificially limit the potential solution space, by leveraging experiences, knowledge, and first principles thinking towards problem solving to create an optimal product. Physical scale does not daunt you, whether the mechanism fits within your hand or is 10 meters long, you will engineer systems that will only come together days before they are needed, so we're counting on you to make sure they work the first time. You are comfortable solving complex problems with little direction and maximum autonomy. Hand calcs guide your thinking and designs and help you quickly bound a problem. We are looking for an experienced mechanical engineer to own the design of the entire system and subassemblies for the next generation of our towers. This will include design of structural components, mechanisms, and electronics integration. As a member of our core design team, you will make important decisions about the product architecture and create designs that will enable practical scale on a short timeline that will meet high product reliability targets. You will quickly iterate and downselect based on data from your analysis and test results from your prototypes. Collaboration cross functionally will be key with electrical, software, civil, NPI and supply chain teams to bring your designs to production and into the field. What You'll Bring • Proven track record owning complex subassemblies or full systems over at least 3 product programs (concept, prototype, validation, production), • Strong fundamentals: load estimation, classic mechanics, structural hand calcs to guide part sizing, FEA and clean CAD designs., • Excellent problem solving - you are tenacious and scientific in your approach while able to quickly explain concepts to others, • Familiarity with mechanism design and the integration of electrical components into hardware products, • Practical knowledge of manufacturing methods such as welding, sheetmetal forming, extrusion, CNC machining, etc, • Experience partnering with contract manufacturers to ramp up production of high volume lines, • Demonstrated CAD fluency for system level ownership - 3D/2D of 20-50 parts simultaneously, • Disciplined processes: Your parts are released, BOMs are maintained, SOPs created for builds, and timelines are up-to-date, • You have true expertise in one area that will level up the team, • Excellent communication - written, verbal, and visual. You know how to tailor to your audience with the right level of technical depth to be as effective as possible, including using basic tools in place of full CAD when it makes sense, • Bachelor's degree in Mechanical Engineering, • Ability to periodically (<10%) travel to visit customers and suppliers, • NX is your primary CAD tool, • Knowledge in applying appropriate FOS and margin to human safety critical application (design margin tables, structural joint calculations) Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities. We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Job DescriptionThe Role Does aggressively tackling cross disciplinary projects from early conceptual stages through to full field deployment sound like the way you want to spend your time? Do you eliminate circular discussions by running a test or use your hands-on skills to build a prototype instead of scheduling another meeting? At Zipline, your work is intended for the field, where customers are counting on it every day, so there is no time for ambiguous communication or unrealistic expectations. We need dedicated engineers to burn down risk and improve reliability in our system like their life depends on it– because others' lives do. If you thrive working with a fast-paced and driven team that focuses on only the most important goals, eliminates blockers, and executes with extreme practicality, keep reading! Mechanical Engineers at Zipline go deep in their area of ownership, become experts in the problem domain, define requirements for their systems, rapidly develop creative and simple solutions, and prove with testing that their system meets the rigors and edge-cases of real-world deployment. We are composed of teams that are responsible for everything from the earliest designs of a new system, to creating test and validation strategies, root-causing issues with existing systems, and much more. What You'll Do • Mechanical interns can own a variety of big problems integral to our system! You can expect to:, • Take product and engineering requirements to develop concepts and evaluate tradeoffs for each, • Use 2D and 3D CAD tools to design parts and assemblies based on sound engineering principles, • Use resources creatively to design, build, and test prototypes to gather quick learnings, • Work cross-functionally with other Zipline teams and suppliers to review designs, • Design, build, and run electro-mechanical testers that you develop to prove reliability of critical components, • Evaluate designs and components on a material, element, and fully integrated product level, • Root cause failures and develop a test to replicate the failure mode, • Document your work so that others can easily understand key decisions made, • Examples of previous intern projects include designing, building, testing, and running:, • flexible blind-mate ducting connection between an aircraft and a ground-based cooling station, allowing for aircraft battery temperature regulation during charging and pre-flight preparation, • a service strategy for removing a docked aircraft from a ground station using a custom designed hand cart, complete with an ergonomic study for a range of technician heights and strengths, • a communications tower with integrated antennas and lightning protection meant to relay vital telemetry information from the drone to the operators during flight, • characterization of proposed and delivered materials, and properties (static strength, durability, and dynamic response) of configured structures, • You must have completed at least the second year of your Undergraduate studies. Masters and PhD students are also eligible., • You'll bring solid mechanical engineering fundamentals for structural analysis, sizing parts, and integrating components into a design with minimal help, • You'll bring automation experience from working with actuators and Raspberry Pi's (or similar), • You're well versed in CAD, and have designed multiple projects with it, • You've worked on complex projects that require mechanical, electrical, and software design, • You're quick to change direction when you realize you've made a mistake OR could achieve the same goal in a simpler way, • You bias to action and communicate consistently with your team to ensure everyone is focused on meeting the project goals on time, • You're excited to build on your design skills with brainstorms, design reviews, and failure mode analysis, • You can anticipate, plan and schedule your own work Candidates are limited to three (3) applications within a 30-day period. The starting cash range for this internship is $38 - 42/ hour. Please note that this is a target, starting cash range for a candidate who meets the minimum qualifications for this role. The final cash pay for this role will depend on a variety of factors, including a specific candidate's experience, qualifications, skills, and working location. The total compensation package for each role may also include: a housing stipend; overtime pay; relocation support; paid sick time; and more. Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities. We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply! Zipline is also committed to providing reasonable accommodations to individuals with disabilities. Please let your point of contact at Zipline know if you require any accommodations throughout your interview process.

Job Description We are looking for a Commissioning Manager to oversee and manage the preparation and coordination of commissioning activities for a portfolio of microgrid projects utilizing solar PV, battery energy storage systems (BESS), generators, and associated switchgear and controls. You will own the commissioning planning, documentation, scheduling, and resource coordination across multiple active project sites. This is a great role for someone looking to play an important technical role at a fast-growing PE-backed business. You will report to our VP of Project Engineering and Preconstruction and will be a hybrid role based out of our Oakland, CA, Santa Monica, CA, Ridgewood, NJ, or NYC offices. Key responsibilities will include: • Develop, manage, and maintain commissioning plans, schedules, and execution strategies across multiple microgrid projects simultaneously., • Define commissioning scope, sequencing, resource requirements, readiness criteria, acceptance criteria, and handoff requirements for solar PV, BESS, generators, switchgear, protection, and controls., • Establish and maintain standardized commissioning processes, templates, procedures, and documentation to be used across the project portfolio., • Track commissioning progress, risks, and constraints across all active sites and communicate status to project leadership., • Coordinate commissioning activities performed by EPCs, OEMs, integrators, utilities, and third-party independent commissioning agents., • Manage interfaces between commissioning activities and construction completion, energization, and utility interconnection. Support temporary power planning, procurement, and implementation for on-site commissioning activities., • Collaborate closely with Engineering, Project Management, EHS, Controls, and Operations teams to ensure commissioning readiness., • Review and approve commissioning test plans, FAT/SAT procedures, and functional test scripts., • Ensure integrated system testing validates microgrid functionality, including islanding, resynchronization, black-start, and load management., • Coordinate with utilities, AHJs, and inspectors to support energization, witnessing, acceptance, and performance testing., • Ensure proper turnover of commissioned systems to Asset Management, including training coordination and documentation completeness., • Capture lessons learned and continuously improve commissioning processes across the portfolio.The Ideal Candidate:, • 10+ years of experience in commissioning management, power systems engineering, or project delivery for DER, microgrid, or utility-scale power systems., • Demonstrated experience managing commissioning activities rather than solely performing field execution., • Experience coordinating multiple stakeholders across parallel project sites., • Experience managing third-party commissioning agents or EPC-led commissioning efforts., • Familiarity with grid-forming and grid-following inverter-based resources., • Strong program-level planning and organizational skills., • Clear communicator capable of aligning internal teams, vendors, and utilities., • Proactive problem solver with a systems-level mindset., • Comfortable operating in a matrixed, fast-paced project environment., • Understanding of onsite power generation, including parallel operation with the utility bus as well as with other DERs, both in grid parallel mode and island mode operations., • Solid understanding of the utility side of the interconnection., • Ability to interpret single-line diagrams, control narratives, protection schemes, and network architectures., • Willingness to travel selectively to project sites for key commissioning milestones.

Job DescriptionThe RoleWe are looking for a Director of Procurement to own commercial relationships with equipment vendors, contractors, and other service providers across the supply chain for our renewable energy projects. This includes identifying vendors, negotiating preferred terms and prices, developing and implementing our procurement strategy, ensuring supply availability, and supporting engineering efforts to standardize designs of distributed energy systems. This role will report to the Chief Operations Officer and be based in the Northeast US or California. Key responsibilities include: • Define and implement the overall procurement strategy, strategic sourcing, and supplier selection, aimed at optimizing costs and operational efficiencies., • Develop Procurement policies, supplier selection procedures, and implementation of sourcing strategies, and conduct supplier selection processes to identify the best sourcing options., • Collaborate with Scale’s engineering team to understand technical requirements for equipment and other components, including battery energy storage, solar PV, generators and generator components, inverters, switchgear, and other balance of system components, • Work with Scale’s project delivery team to understand construction and engineering requirements for projects, and with Scale’s asset management team to understand third-party operations and maintenance service requirements, • Identify suppliers with conforming equipment specifications and/or capabilities, appropriate quality controls, and bankable performance history, • Negotiate terms and pricing with suppliers and drive procurement activities utilizing standard framework agreements to facilitate purchasing activities, • Develop and execute sourcing strategies to ensure continuity of supply while managing risks across the supply chain, • Work with engineering to standardize system designs, implementation, and operations, considering supply chain risks, costs, etc., • Guide internal teams to resolve cross-functional issues related to equipment, construction, and operations, • Track and analyze vendor performance, establish and maintain relevant KPI’s, monitor and manage relevant metrics, including spend analytics, operational efficiencies, supplier performance, warranty recovery, and benefit capture from procurement activities., • Identify and execute initiatives to increase procurement process efficiency & effectiveness, including implementation of procurement software solutions The ideal candidate:, • 10+ years of supply chain development and/or strategic sourcing experience, • Deep working knowledge of the renewable energy market and vendor landscape, pricing, terms, and trends, • Experience vetting vendors for quality and experience, • Comfortable presenting to and negotiating with local distributors as well as high-level executives, • Solid knowledge and demonstrated understanding of sourcing and/or purchasing leadership, vendor relations, procurement, sourcing, distribution, and tracking program savings and supplier service KPIs, • Ability to influence internal and external teams, with strong negotiation skills, • Excellent problem-solving skills with the ability to identify and manage risks, • Ability to communicate with diverse stakeholders, including engineering, on technical subject matters, • Background in mechanical, electrical, or industrial engineering is helpful. MBA is a plus

Job DescriptionBenefits: • Company car, • Dental insurance, • Health insurance We are an end-to-end Renewable Energy provider, offering products to commercial and enterprise clients in EV Charging solutions, Fleet Electrification, Solar Micro-grids, Energy storage, Hydroponic farming and Rain Water/Grey Water collection systems. We have been experiencing tremendous growth in all these areas and operate under several government rebate programs that ensure a steady and reliable flow of revenues. Our company handles the entire flow of providing these products and services beginning with Sales, Provisioning, Design and Engineering, Contracting and Construction, Servicing and Maintenance. We are a licensed C-10 contractor and operate construction crews in various areas of CA and soon the rest of the U.S. Overview of Position We are looking for experienced Foremen for several jobs in CA. Job tasks include the following Job Duties & Responsibilities: • Manage a crew of 5 10 workers;, • Read and interpret drawings, blueprints, schematics/ electrical code specifications to determine layout of equipment installations, • Supervise and manage trenching for utility conduits, directing operators on backhoes, backfilling and underground scanning, • Supervise and manage pouring and finishing concrete pads for switchgear, Electrical Chargers, Bollards, directing paving, and overhead EMT conduit placement, • Supervise and manage Electrical resources on the job, • Arrange and coordinate safety meetings;, • Delegate tasks and responsibilities to crew members;, • Be the point of contact with the employers site superintendent;, • Supervise and train apprentices on the job, as required;, • Maintain a safe work environment by adhering to all company guidelines and OSHA safety requirements and also through reporting violations of policies, procedures and guidelines to immediate supervisor;, • Controlling inventory on truck, job-site, and in/out of stock (for active jobs);, • Organize and maintain material lists for your crew;, • Gathering required material;, • Responsible for maintaining company tools;, • Inspect jobs upon completion and ensure areas are clean;, • Work with building principals and supervisors to complete projects;, • Respond to emergency calls as needed;, • Updating work logs, client accounts, and handling other administrative duties., • Communicating with clients in a professional, courteous manner at all times., • Take AHJ inspections and follow up with the utilities.Secondary Functions, • Interpersonal Skills - Focuses on solving conflict, not blaming; maintains confidentiality; listens to others, is proactive in resolving issues., • Written Communication - Write clearly and informatively; conscious of audience and varies writing style accordingly, able to read and interpret written requirements., • Contributes to building a positive team spirit, • Time Management: Prioritizes and plans work activities, uses time efficiently, • Professionalism At all timesWhat we Offer:, • Salaried position, • Up to Two weeks of PTO, • Medical and Dental, • Company Truck with company credit card, • At least two crews with one foreman each, • Room for growthZero Impact Builders is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

Job DescriptionBenefits: • Company car, • Dental insurance, • Health insurance We are an end-to-end Renewable Energy provider, offering products to commercial and enterprise clients in EV Charging solutions, Fleet Electrification, Solar Micro-grids, Energy storage, Hydroponic farming and Rain Water/Grey Water collection systems. We have been experiencing tremendous growth in all these areas and operate under several government rebate programs that ensure a steady and reliable flow of revenues. Our company handles the entire flow of providing these products and services beginning with Sales, Provisioning, Design and Engineering, Contracting and Construction, Servicing and Maintenance. We are a licensed C-10 contractor and operate construction crews in various areas of CA and soon the rest of the U.S. Overview of Position • Read and interpret drawings, blueprints, schematics and electrical code specifications to determine layout of electrical equipment installations;, • Install, examine, replace or repair electrical wiring, boxes, conduits, feeders, Panels, Commercial Switchgear up to 3000A, Transformers Disconnects and other commercial 208/480V electrical components;, • Test electrical equipment and components for continuity, current, voltage and resistance;, • Maintain, repair, install and test switch-gear, transformers, switchboard meters;, • Communicating with clients in a professional, courteous manner at all times., • Collaborating with construction workers, plumbers, and other crew members., • Trenching for electrical underground, • Test electrical systems using tools that include voltmeters, oscilloscopes and ohmmeters to determine where issues may be occurring, the safety of the system and to ensure compatibility, • Repair electrical issues by replacing or installing components, wiring or devices, • Determine the steps necessary to assess an electrical situation using testing devices, blueprints and maps, • Maintain a safe work environment by adhering to all company guidelines and OSHA safety requirements and also through reporting violations of policies, procedures and guidelines to immediate supervisor, • Use ladders, scaffolding, platform and lifts to work on electrical systems in commercial properties., • Trench and install underground PVC and overhead EMTSecondary Functions, • Interpersonal Skills - Focuses on solving conflict, not blaming; maintains confidentiality; listens to others, is proactive in resolving issues., • Written Communication - Write clearly and informatively; conscious of audience and varies writing style accordingly, able to read and interpret written requirements., • Contributes to building a positive team spirit, • Time Management: Prioritizes and plans work activities, uses time efficiently, • Professionalism At all timesZero Impact Builders is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

Job DescriptionDescription: About GRID Alternatives GRID Alternatives is a national leader in making clean, affordable solar power and solar jobs accessible to low-income communities and communities of color. GRID is an entrepreneurial, high-growth non-profit organization that provides direct solar installation and project development; clean mobility options; workforce training and service-learning opportunities; and low-income solar policy advocacy. Our Vision: a rapid, equitable transition to a world powered by renewable energy that benefits everyone. Our Mission: to build community-powered solutions to advance economic and environmental justice through renewable energy. What it's like to work at GRID… At GRID, we care about each other and know that each employee has a whole self that includes life outside of work. Our culture supports learning, growth and well-being of all of our team members. Summary of the role: The Senior Commercial Design Engineer is a senior individual contributor role within GRID Alternatives’ commercial design team, reporting to the Commercial Design Manager. This position plays an important role in delivering high-quality, code-compliant designs for multifamily and light commercial projects, with most systems in the 50 kW–500 kW range. Rooftop solar is the core scope of this role, with additional opportunities to work on carport solar, battery-enabled microgrids, and EVSE infrastructure as GRID continues to diversify and expand its commercial portfolio. In this role, you’ll collaborate closely with other senior designers, junior designers, project managers, construction staff, and development teams to support design development, costing and estimating, and project execution. You’ll contribute technical expertise throughout the project lifecycle while also helping improve design standards, tools, and processes as the program grows. This role is ideal for an experienced commercial solar designer who enjoys solving complex technical problems, working collaboratively across teams, and contributing to a thoughtful, mission-driven organization. Job Duties include, but are not limited: • Produce complete design packages for utility and AHJ submittals for commercial solar and solar-plus-storage projects, generally ranging from 50 kW to 500 kW, • Develop CAD layouts, electrical diagrams, stringing plans, calculations, elevations, details, and bills of materials based on project requirements, • Support early-stage project development through technical input for project costing and estimating, • Serve as a key technical resource within the commercial design team, assisting with design questions, code interpretation, and troubleshooting, • Perform quality assurance reviews of colleagues’ work to ensure accuracy, constructability, and code compliance, • Clearly communicate design intent, assumptions, and constraints to internal teams and external partners, including project managers, construction teams, utilities, and AHJs, • Provide technical guidance and mentorship to junior designers through reviews, feedback, and informal training, • Contribute ideas and feedback on design standards, templates, tools, and workflows in partnership with the Commercial Design Manager and peers, • 5+ years of experience designing grid-tied commercial and/or multifamily solar projects, including solar-plus-storage, • Deep understanding of commercial PV system design, component selection, and production modeling, • Strong proficiency in AutoCAD and Excel, with experience using tools such as HelioScope, Aurora, PV Watts, NREL SAM, PVsyst, or similar, • Experience producing utility- and AHJ-ready plansets, including calculations, details, and as-built documentation Collaboration & communication • Ability to clearly explain technical concepts and design decisions to a range of audiences, • A collaborative working style that values shared problem-solving, consensus-building, and alignment across disciplines, • Comfort giving and receiving feedback in service of team goals and project outcomes Quality & judgment • Strong attention to detail and a quality-focused mindset, • Ability to exercise sound technical judgment while working within established standards, processes, and decision frameworks, • Growth & mindset, • Curiosity and interest in improving tools, templates, and workflows, • Openness to feedback from peers, construction teams, and managers, • Interest in mentoring and supporting junior designers as part of a collaborative team Compensation: The compensation range for this fulltime, exempt position is $90,000-$100,000. The base pay that will actually be offered will vary depending on job-related knowledge, skills, location, experience and take into account internal equity. Benefits: Medical, Dental, Vision/Eye Care insurance, 5 weeks paid time off (PTO),13 paid holidays, Commuter Checks, 403b Retirement Plan, Employee Assistance Program (EAP), Flexible Spending Account (FSA), Health Savings Account (HSA), STD, LTD, and AD&D insurance Where you will sit & the places you may go… The ideal candidate will sit in the United States (remote). This position may require up to 25% out-of-town travel to regional offices and special projects such as org-wide celebrations, team building exercises, etc. Availability to work nights and weekends may very rarely be required. GRID Alternatives may provide vehicles for work travel and/or travel reimbursement for personal vehicle use. In this instance, applicants must hold a valid driver’s license and have a good driving record. Important to note for California applicants: **Hired CA candidates must be able to pass a screening for drugs that are illegal in the state of California, including: amphetamine, cocaine metabolite, opiates, and PCP. Reasonable Accommodation for Job Seekers with a Disability: If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to: Ready to Apply? Submit a resume describing your interest. Due to the high volume of inquiries, mailed and emailed applications are not accepted. GRID Alternatives provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, national origin, age, disability or genetics. Because we value EID at GRID Alternatives, we encourage folks from all backgrounds to apply, even if you do not meet all of the preferred qualifications. Every member of GRID Alternatives must be dedicated to participating in the organization's equity, inclusion, and diversity (EID) work.

Solar group that will provide electrical technical support throughout the entire construction project. Review manufacturer’s data for electrical scope (wiring requirements, electrical characteristics, grounding, power factor, lightning protection, generator outputs). Minimum three years in electri

Essential Responsibilities Performs assessments of electrical systems and prepare written reports documenting the capacity and limitations of the systems Performs detailed engineering calculations and analysis in connection with electrical design of utility systems for transportation facilities Prep

Coordinate work projects within the electrical scope, ensuring high-quality installation of electrical portions, including underground cabling, overhead lines, and substation construction. Participate in project meetings, providing liaison between field engineers and contractors or craft workers to

Project Manager - Faculty and Departmental Diversity Initiatives (7398U), Equity & Inclusion - 65874.At the University of California, Berkeley, we are committed to creating a community that fosters equity of experience and opportunity, and ensures that students, faculty, and staff of all backgrounds

Project Manager, Team Leader (0480U) - 84534.At the University of California, Berkeley, we are dedicated to fostering a community where everyone feels welcome and can thrive.Our culture of openness, freedom and belonging make it a special place for students, faculty and staff.As a world-leading inst

Facilities Project Management Specialist 2 (7077) Job 84192 - The Department of Electrical Engineer. The Department of Electrical Engineering and Computer Sciences (EECS) in both the College of Engineering and the Division of Computing Data Science and Society, is the largest department on the Berke

Project Manager (5257U) - 84795.At the University of California, Berkeley, we are dedicated to fostering a community where everyone feels welcome and can thrive.Our culture of openness, freedom and belonging make it a special place for students, faculty and staff.As a world-leading institution, Berk

MUST HAVE ULTRA-LUXURY EXPERIENCE IN THE UNITED STATES.Renowned ultra-luxury residential interior design firm in San Francisco is seeking a dynamic individual to join their team!.Interior Designer/Project Manager.Work with Studio Director and team on project programming, design, decoration and plann

Project Manager, Wet Lab Specialist (0480U) - 84542.At the University of California, Berkeley, we are dedicated to fostering a community where everyone feels welcome and can thrive.Our culture of openness, freedom and belonging make it a special place for students, faculty and staff.As a world-leadi

Overview We are authentic, professional providers of fun, focused on building a Great Place To Work For All by staying true to our mission: "Life's a Party, We're Makin' It Fun!" and "So Much Fun It's Scary!" At Spencer's and Spirit, we do the right thing always-integrity, fairness, respect, and tra

Project Manager, Team Leader - Special Projects (0480U) - 84933.At the University of California, Berkeley, we are dedicated to fostering a community where everyone feels welcome and can thrive.Our culture of openness, freedom and belonging make it a special place for students, faculty and staff.As a

Provides timely, quality maintenance for FedEx vehicle fleet and ground support equipment which requires preventative maintenance, troubleshooting, repairs, modifications, and documentation.Document work with appropriate repair orders and parts ordering using FedEx computer systems.Ensures work is i

Capital Projects Senior Project Manager (0364U) 83555.At the University of California, Berkeley, we are dedicated to fostering a community where everyone feels welcome and can thrive.Our culture of openness, freedom and belonging make it a special place for students, faculty and staff.As a world-lea

ABM Industries - - Responsibilities: Patch and paint walls; Install corner guards and kick plates; Replace ceiling tiles; Basic carpentry repairs; Repair or replace carpet.

CoralTree Hospitality - - Responsibilities: Perform general maintenance tasks; Complete assigned work orders; Assist in maintenance and repairs of all areas of the property; Respond to guest requests to ensure safety and comfort; Maintain cleanliness and organization of assigned work areas.

InterSolutions - - Responsibilities: Complete service tickets and work orders efficiently and accurately; Prepare vacant apartments for new residents by managing the turnover process; Keep grounds and common areas clean and free of debris; Deliver exceptional customer service to residents; Perform

Abacus Service Corporation - - Responsibilities: Assemble mechanical and electrical components for autonomous delivery robot systems.

Atria Senior Living - - Responsibilities: Diagnose and repair problems in HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc.

Abacus Service Corporation - - Responsibilities: Performing maintenance and repair work on buildings and grounds; Assisting with facility inspections and safety audits; Maintaining records of maintenance activities and repairs; Supporting administrative functions as needed; The ideal candidate will

InterSolutions - - Responsibilities: Complete service tickets and work orders efficiently and accurately; Prepare vacant apartments for new residents by managing the turnover process; Keep grounds and common areas clean and free of debris; Deliver exceptional customer service to residents; Perform

United Airlines - JobID: SFO00004979 [Field Technician / Maintenance Mechanic] As a Ground Service Equipment Technician at United Airlines, you'll: Troubleshoot, repair and complete preventative maintenance on Ground Service Equipment (both motorized and non-motorized); Perform diagnostic testing an

Responsibilities: Respond to work orders for minor repairs to equipment; Order and manage parts inventory, schedule/prioritize assignments; Read, understand, and follow service manual guidelines; Work safely and handle other duties as assigned; Read, understand, and follow service manual guidelines.

Electrical transmission line engineering for 115kv-500kv.

Diagnoses and repairs problems in such areas as HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc. HVAC repair, Plumbing, Electrical, and General Maintenance repair work.