Trabajos solar electrical en Westminster, ColoradoCrear alertas

About the Role: The Proposal Coordinator will work collaboratively with our Marketing and Business Development team. The Proposal Coordinator will support our district offices across the United States and western Canada through the development of high quality, professional pre-qualification submittals, proposals, presentations, and other marketing collateral. Company Overview With roots dating to 1891 and 8,500+ employees, MYR Group is a publicly traded holding company of 13 specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. Essential Functions • Work in tandem with marketing, business development, and operations personnel to prepare proposals (RFPs) and statements of qualifications (SOQs), • Write, proofread, and edit proposal content, including cover letters, company overviews, technical staff resumes, project descriptions, graphics, organizational charts, etc., • Develop proposal outlines, organize and compile all components, capture technical information from subject matter experts, develop proofs, etc., • Support proposal submittals and handle printing and production, when required, • Develop and/or update presentations, brochures, and other marketing materials, • Support archiving/storing information to maintain the accuracy of internal databases, • Administer company qualification information in online prequalification databases, • Perform other marketing and business development tasks as needed, • Regular and predictable attendance, • Other duties as assigned, • Essential functions of this position are to be performed in a company-designated office or field location, • Understand and comply with the company’s Code of Business Ethics Policy and other industry-specific professional and ethical standards, if applicable About You: Qualifications • Minimum 3 to 5 years of relevant experience, • Bachelor's degree preferably in communications, journalism, marketing, or related field; combination of relevant education and experience considered in lieu of degree Knowledge/Skills/Abilities • Exceptional attention to detail, organization, and active listening skills with the ability to creatively problem-solve, • Strong editing, writing, and communication skills, • Experience with Adobe Creative Suite (InDesign) and graphic layout is preferred, • Self-motivated with the ability to work in a fast-paced environment, meet multiple project deadlines simultaneously, and manage a complex workload, • Knowledge of the A/E/C industry and proposal experience a plus, • Able to successfully complete required background and drug screens What We Offer: Compensation & Benefits • Salary $50,000-$70,000/year, • Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate., • Comprehensive benefits package - Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - Fifteen Dollar weekly premium for employee or employee plus family coverage., • Dental – 100% employer-paid premium., • ThrivePass Health & Wellness Reimbursement Program - Twelve hundred dollars annually for health and wellbeing-related purchases., • Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday)., • Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential., • Superior educational assistance program (support for educational costs, internal training, and more!)., • Company-paid short and long-term disability, life, and accidental death & dismemberment., • Company-paid business travel accident insurance., • Employee Assistance Plan (EAP)., • Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents. Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at 1-855-635-1321. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #apphigh LinkedIn Recruiter Assignment (your initials): #LI-MM1 LinkedIn Location Expansion #: #CO LinkedIn Workplace: #LI-Onsite

About the Role: The Proposal Specialist works collaboratively with MYR Group's Marketing and Business Development team. The Proposal Specialist will support our district offices across the United States and western Canada through the development of high quality, professional pre-qualification submittals, proposals, presentations, and other marketing collateral. Company Overview With roots dating to 1891 and 8,500+ employees, MYR Group is a publicly traded holding company of 13 specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. Essential Functions • Lead the development of proposals (RFPs) and statements of qualifications (SOQs), collaborating with marketing, business development, and operations personnel, • Write, proofread, and edit proposal content, including cover letters, company overviews, technical staff resumes, project descriptions, graphics, organizational charts, etc., • Lead team kick-off calls, develop proposal outlines, compile components, capture technical information from subject matter experts, ensure deadlines are met, etc., • Support proposal submittals and handle printing and production, when required, • Develop and/or update presentations, brochures, and other marketing materials, • Support archiving/storing information to maintain the accuracy of internal databases, • Perform other marketing and business development tasks as needed, • Essential functions of this position are to be performed in a company-designated office or field location, • Other duties as assigned, • Regular and predictable attendance, • Understand and comply with the company’s Code of Business Ethics Policy and other industry-specific professional and ethical standards, if applicable About You: Qualifications • Minimum five years of relevant experience, • Bachelor's degree preferably in Communications, Journalism, Marketing, or related field; combination of relevant education and experience considered in lieu of degree Knowledge/Skills/Abilities • Exceptional attention to detail, organization, and active listening skills with the ability to creatively problem solve, • Strong editing, writing, and communication skills, • Experience with Adobe Creative Suite (InDesign) and graphic layout is preferred, • Self-motivated with the ability to work in a fast-paced environment, meet multiple project deadlines simultaneously, and manage a complex workload, • Knowledge of the A/E/C industry and proposal experience a plus What We Offer: Compensation & Benefits • Salary $68,000-$90,000/year, • Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate., • Comprehensive benefits package - Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - Fifteen Dollar weekly premium for employee or employee plus family coverage., • Dental – 100% employer-paid premium., • ThrivePass Health & Wellness Reimbursement Program - Twelve hundred dollars annually for health and wellbeing-related purchases., • Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday)., • Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential., • Superior educational assistance program (support for educational costs, internal training, and more!)., • Company-paid short and long-term disability, life, and accidental death & dismemberment., • Company-paid business travel accident insurance., • Employee Assistance Plan (EAP)., • Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents. Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at 1-855-635-1321. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #apphigh LinkedIn Recruiter Assignment (your initials): #LI-MM1 LinkedIn Workplace: #LI-Onsite

Job DescriptionWe Build Dream Machines That Explore the WorldFull-Time Van Build Tech - Vanlife Customs Are you tired of building the same thing every day? At Vanlife Customs, every project is different. One week you're installing a custom electrical system for a family's cross-country adventure. Then, you're fabricating a mobile office for a digital nomad heading to Alaska. Then, you're converting an ice-cream truck to be fully electric. We're the team behind some of the most incredible custom vehicles on the road, and we need someone who's as passionate about craftsmanship as our customers are about adventure. What Makes This Different • 4.9-star Google rating doesn't happen by accident - we're known nationwide for builds that perform everywhere from Moab to Maine, • Over 400 custom vehicles built and thousands serviced - every one unique, every one an engineering challenge, • From backyard startup to 15,000 sq ft facility - we're growing fast and need career-focused team members to grow with us, • Real impact: You'll see your work featured on social media as customers live their dreams in vehicles you builtWhat You'll Do Transform empty cargo vans into fully functional mobile homes and offices. Install everything from external accessories like roof racks, ladders, lights, winches, suspension systems - or solar systems and lithium batteries, through to custom cabinetry and electrical systems. Cut body panels for windows and vents. Diagnose and repair complex 12V and 110V systems. Every build is a puzzle - and you'll be the one solving it. Who We Need This is a full-time career opportunity, not a side gig. We invest heavily in our team through training, equipment, and growth opportunities. We need someone who: • Has 1+ years experience with carpentry, electrical, or automotive work, • Can operate shop tools confidently (table saw, drill press, grinders, etc.), • Reads technical drawings and installation instructions like a pro, • Thrives on problem-solving and attention to detail, • Wants to build a long-term career with a growing company Bonus points for: CNC experience, vehicle maintenance knowledge, LEAN manufacturing background Why You'll Love It Here • Competitive pay: $25-35/hour package, dependent on experience, • Full benefits: Health, dental, vision + PTO, • Employee discounts on builds and gear, • Growth opportunities as we expand, • Shop access for personal projects (with approval), • Work with a team that actually cares about quality and craftsmanshipReady to Build Something Amazing? We're looking for someone who wants to make this their career, not their weekend hobby. If you're passionate about craftsmanship and want to be part of a team that's redefining mobile adventure, we want to meet you. This is a full-time position with growth potential. Part-time and contract candidates will not be considered. Equal Opportunity Employer. Vanlife Customs is committed to creating an inclusive workplace where everyone can thrive. Powered by JazzHR ARZuaLJ9Du

Job DescriptionTraveling Solar Laborer Location: Surround Denver Area plus Montana Pay: $20–$40/hr with Per Diem for Travel for Montana Job Travel: All travel expenses paid (lodging, mileage, per diem) Schedule: Project‑based assignments, full‑time hours during projects Overview This Traveling Solar Laborer position supports utility‑scale solar farms and commercial solar installation projects by performing hands‑on site labor, equipment support, and array‑field maintenance. Ideal for individuals who enjoy physical work, outdoor environments, and traveling to different solar project sites across the country. Responsibilities • Assist with installation of solar racking systems, panels, and hardware, • Perform general labor tasks such as trenching, site cleanup, material staging, and equipment handling, • Support mechanical assembly of solar arrays, torqueing, and alignment, • Operate or assist with basic construction equipment (lifts, skid steers, torque tools), • Perform preventative maintenance tasks on solar fields (panel washing, vegetation clearing, minor repairs), • Set up temporary site infrastructure including fencing, laydown areas, and safety zones, • Follow all safety procedures including electrical safety, fall protection, and PPE requirements, • Travel to project sites for multi‑day or multi‑week assignments, • Complete additional labor duties as directed by project supervisorsSkills & Qualifications, • Experience in solar installation, construction, general labor, or mechanical assembly preferred, • Ability to lift 50–75 lbs and perform physically demanding outdoor work, • Comfortable working in various weather conditions and on uneven terrain, • Willingness to travel frequently for extended project assignments, • Strong reliability, work ethic, and attention to detail, • Ability to learn and operate torque tools, lifts, and basic construction equipment, • Valid driver’s license required, • OSHA 10, equipment certifications, or solar experience a plusPay & Schedule, • $20-$40 depending on experience, • Overtime available on most projects, • All travel expenses covered (hotel, mileage, per diem)Job Type & Location, • This is a Contract to Hire position based out of Denver, CO.Job Type & Location This is a Contract to Hire position based out of Denver, CO. Pay and Benefits The pay range for this position is $20.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Denver,CO. Application Deadline This position is anticipated to close on Jun 15, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Reputable Electrical Contractor supporting Ai infrastructure This Jobot Job is hosted by: Albert Simons Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $150,000 - $200,000 per year A bit about us: As a full-service electrical contractor, we specialize in high-voltage substation construction, transmission and distribution, grid modernization, and emergency storm restoration. Our teams are equipped and ready to power the utility, infrastructure, and energy projects that communities depend on. Why join us? 4+ weeks PTO Limited travel 401k with employer match Stock equity options Support from national utilities contractor Job Details An organization in the power infrastructure sector is seeking a skilled Substation Estimator with a strong focus on delivering high-quality construction projects. This role is responsible for preparing independent cost estimates and identifying project resource needs, primarily supporting utility substation construction and maintenance projects across multiple regions. Key Responsibilities Review engineering drawings, specifications, and project documents to complete material takeoffs and develop construction cost estimates for substation projects. Assist in assembling bid packages and proposals, including supporting documentation, bid forms, and preliminary schedules, and help review submissions prior to delivery. Work with project teams to help define project scope, including engineering, construction, and contractual elements. Produce preliminary or conceptual cost estimates when project details are limited. Develop detailed cost estimates following project approval using company estimating standards and facility drawings. Build project schedules and evaluate requirements for labor, materials, equipment, and tools needed for execution. Participate in internal bid review meetings with management, project managers, and field personnel to evaluate scope, pricing, subcontractor involvement, and potential risk. Provide cost analysis and technical insight to support both competitive bids and negotiated contracts, including participation in contract discussions when needed. Support the development and maintenance of internal cost history databases and estimating tools to improve future project estimates. Provide preconstruction support and technical insight to project management teams once projects move forward. Review project documentation to identify subcontracting requirements, prepare requests for quotations, and evaluate vendor proposals for completeness and alignment with scope. Coordinate with clients, vendors, and subcontractors to gather pricing information and clarify project requirements. Qualifications Approximately 3–5 years of estimating, project management, or field experience within the utility substation construction industry preferred. Familiarity with renewable energy sectors such as solar, wind, or battery energy storage is beneficial. Experience using estimating software, project management platforms, or similar tools. Solid understanding of electrical systems, equipment, and construction practices related to utility infrastructure. Bachelor’s degree in Engineering, Construction Management, Business Administration, or a related field preferred, or equivalent experience. Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Description Looking for an opportunity to make an impact? The Leidos Energy, Infrastructure, and Automation operation helps solve utilities’ complex challenges through our full life-cycle, performance-based solutions. Our services include engineering, planning, project management, construction management, and commissioning for electric power substations and transmission and distribution lines; protection and controls design; and electrification programs. Utilities consistently come to Leidos for reliable power expertise, as reflected through our work with more than 75 investor-owned utilities and more than 100 municipals/cooperatives across the country as well as a growing number of private developers. Your greatest work is ahead! Leidos' Energy and Infrastructure Consulting (E&IC) Division is seeking a Senior Civil/Structural Engineer with strong design knowledge of power projects in civil, geotechnical, hydrological, and structural design sub-disciplines. As a valued team member you will work in a fast-paced, collaborative environment with opportunities for career development and growth. What you’ll be doing: • Review civil and structural designs of new and existing power generation projects including wind, solar, hydro, battery energy storage systems, and thermal projects., • Support Project Managers during transactional due diligence reviews., • Review design codes applicable to the project under review, EPC Contract specifications, and design and equipment manufacturer drawings and calculations prepared by others., • Provide subject matter expertise in civil and structural design, review of EPC Contract specifications, and review of drawings and calculations by others., • Assist with monitoring and managing projects, developing sales proposals, and completing technology/bankability reviews as needed., • Provide Owner’s Engineering and Advisory support. What does Leidos need from me? • Bachelor's of Science degree in Civil or Structural engineering with eight plus years of experience working on industrial, power delivery, or power generation project designs or other relevant experience., • Team player with ability to communicate effectively with internal staff such as Project Manager’s and SMEs from other disciplines, as well as with external parties such as Owners, Developers, Lenders, Investors, and Manufacturers., • Experience providing high level reviews of engineer’s finite element analysis models, hand and software generated calculations, design drawing packages, and the overall design basis/methodology selected and deployed related to peer reviews, fatal flaw reviews, conformance to industry standard practices, conformance to appropriate design codes, and conformance with project specifications., • Competency with various governing design codes used in civil, structural, and geotechnical design, such as the International Building Code (IBC), ASCE 7, ACI 318, AISC, AISI, and others. Familiarity with international codes a plus., • Familiarity with structural analysis software including finite element analysis such as STAAD or RISA 3D. Knowledge of Mathcad, AutoCAD, and other structural analysis software is a plus., • Ability to successfully meet client deadlines on multiple projects under pressure. Clients requiring subject matter expertise consulting could include private equity, infrastructure and hedge funds, investment and commercial banks, private developers, legal and financial advisors, original equipment manufacturers, DOE, and EIA, among others., • Ability to manage schedule commitments related to multiple project reviews at one time., • Willingness to travel for project site visits in support of reviews. Travel could include the potential for international travel. The position can periodically include weeks with extended work hours to support client(s) needs., • Proficient in the use of Microsoft 365 and Adobe/Bluebeam. Favorable if you have: • Master’s degree in civil/structural engineering., • FE/EIT certification with aspiration to obtain professional engineer licensure., • Professional Engineer’s (PE) license., • Licensed Structural Engineer (SE)., • Field engineering experience during the construction of projects., • Spanish language speaking and reading skills., • Familiarity with large construction projects – industrial, large commercial, mechanical, and electrical systems, and/or electrical transmission and distribution experience., • Experience in the design of power generation projects, including natural gas combined and simple cycle, wind turbine foundations, solar racking/trackers and the pile foundations, and rooftop solar systems is a strong differentiator., • Familiarity with review of construction specifications and submittals., • Familiarity with construction documentation such as ECN’s, CD’s, RFI’s, and NCR’s. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. Original Posting:April 9, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range:Pay Range $92,300.00 - $166,850.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit www.Leidos.com. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at www.leidos.com/careers/pay-benefits. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the U.S. Federal Trade Commission. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Job DescriptionWe Build Dream Machines That Explore the World - Full Time Adventure Vehicle Technician Are you tired of building and servicing the same thing every day? What Makes Us Different • 4.9-star Google rating doesn't happen by accident - we're known nationwide for builds that perform everywhere from Moab to Maine, • Over 400 custom vehicles built and thousands serviced - every one unique, every one an engineering challenge, • From backyard startup to 15,000 sq ft facility - we're growing fast and need career-focused team members to grow with us, • Real impact: You'll see your work featured on social media as customers live their dreams in vehicles you built Vanlife Customs builds premium adventure vans with particular focus on Ford Transit and Mercedes-Benz Sprinter platforms. Our vehicles combine suspension upgrades, electrical systems, and expedition equipment to create capable overland vehicles used across North America. We are seeking an Adventure Vehicle Technician to join our team. This position is focused on automotive systems - Upgrades, suspension installation, and aftermarket vehicle equipment. This position tends to appeal to technicians from dealership, performance, 4x4, or specialty vehicle shops who want to work on interesting builds rather than routine service work. Suspension and Chassis Systems Install suspension upgrades including lift kits, shocks, springs, sway bars, steering components, and chassis upgrades. Follow torque specifications and manufacturer installation procedures to ensure safe and reliable operation. Automotive Diagnostics Diagnose mechanical and electrical issues on Ford Transit and Mercedes-Benz Sprinter platforms. Use scan tools, wiring diagrams, and standard diagnostic procedures to identify faults and verify repairs. Overland and Vehicle Accessory Installation Install aftermarket equipment including roof racks, ladders, bumpers, winches, lighting systems, compressors, and recovery gear. Vehicle Electrical Systems Install auxiliary electrical systems such as lithium battery systems, inverters, solar charging equipment, heaters, and vehicle power distribution components while maintaining correct integration with factory vehicle systems. Vehicle Integration and Testing Ensure all installed systems function correctly with OEM vehicle electronics and safety systems. Perform system testing and resolve issues before vehicle delivery. Quality and Workmanship Maintain professional installation standards, clean wiring and mounting practices, and accurate documentation of work performed. Required Experience 3+ years experience as an automotive technician, performance technician, or specialty vehicle installer Strong mechanical aptitude and troubleshooting ability Experience installing suspension components or chassis upgrades Familiarity with automotive electrical systems Ability to use diagnostic scan tools and interpret vehicle fault codes Ability to follow wiring diagrams and technical documentation Valid driver’s license Preferred Experience Experience working on Ford Transit or Mercedes Sprinter platforms Background in 4x4, overland, or off-road vehicle builds ASE certification or equivalent automotive training Experience installing winches, bumpers, lighting systems, and roof racks Familiarity with auxiliary 12V or lithium electrical systems What Makes This Role Different Work primarily on new or low-mileage vehicles Projects involve suspension, electrical systems, and expedition equipment Interesting builds rather than routine dealership maintenance Clean, professional shop environment Opportunity to build some of the most capable adventure vans on the road Compensation Competitive hourly pay based on experience. Full-time position in a professional shop environment with a team focused on quality and craftsmanship. Powered by JazzHR 7mFAAcDlOp

Description Looking for an opportunity to make an impact? The Leidos Energy, Infrastructure, and Automation operation helps solve utilities’ complex challenges through our full life-cycle, performance-based solutions. Our services include engineering, planning, project management, construction management, and commissioning for electric power substations and transmission and distribution lines; protection and controls design; and electrification programs. Utilities consistently come to Leidos for reliable power expertise, as reflected through our work with more than 75 investor-owned utilities and more than 100 municipals/cooperatives across the country as well as a growing number of private developers. Your greatest work is ahead! Leidos' Energy and Infrastructure Consulting (E&IC) Division is seeking a Civil/Structural Engineer with strong design knowledge of power projects in civil, geotechnical, hydrological, and structural design sub-disciplines. As a valued team member you will work in a fast-paced, collaborative environment with opportunities for career development and growth. Location: Ideally, this person would be located within commuting distance of Denver, CO or Framingham, MA area and work at least three days in the office weekly. Fully remote would be considered on a case-by-case basis. There is an identical senior level opening (8+ years of relevant experience) which is remote. What you’ll be doing: Review civil and structural designs of new and existing power generation projects including wind, solar, hydro, battery energy storage systems, and thermal projects. Support Project Managers during transactional due diligence reviews. Review design codes applicable to the project under review, EPC Contract specifications, and design and equipment manufacturer drawings and calculations prepared by others, Provide subject matter expertise in civil and structural design, review of EPC Contract specifications, and review of drawings and calculations by others. Assist with monitoring and managing projects, developing sales proposals, and completing technology/bankability reviews as needed. Provide Owner’s Engineering and Advisory support. What does Leidos need from me? Bachelor's of Science degree in Civil or Structural engineering with four plus years of experience working on industrial, power delivery, or power generation project designs or other relevant experience. Team player with ability to communicate effectively with internal staff such as Project Manager’s and SMEs from other disciplines, as well as with external parties such as Owners, Developers, Lenders, Investors, and Manufacturers. Experience providing high level reviews of engineer’s finite element analysis models, hand and software generated calculations, design drawing packages, and the overall design basis/methodology selected and deployed related to peer reviews, fatal flaw reviews, conformance to industry standard practices, conformance to appropriate design codes, and conformance with project specifications. Competency with various governing design codes used in civil, structural, and geotechnical design, such as the International Building Code (IBC), ASCE 7, ACI 318, AISC, AISI, and others. Familiarity with international codes a plus. Familiarity with structural analysis software including finite element analysis such as STAAD or RISA 3D. Knowledge of Mathcad, AutoCAD, and other structural analysis software is a plus. Ability to successfully meet client deadlines on multiple projects under pressure. Clients requiring subject matter expertise consulting could include private equity, infrastructure and hedge funds, investment and commercial banks, private developers, legal and financial advisors, original equipment manufacturers, DOE, and EIA, among others. Ability to manage schedule commitments related to multiple project reviews at one time. Willingness to travel for project site visits in support of reviews. Travel could include the potential for international travel. The position can periodically include weeks with extended work hours to support client(s) needs. Proficient in the use of Microsoft 365 and Adobe/Bluebeam. Favorable if you have: Master’s degree in civil/structural engineering. FE/EIT certification with aspiration to obtain professional engineer licensure. Professional Engineer’s (PE) license. Licensed Structural Engineer (SE). Field engineering experience during the construction of projects. Spanish language speaking and reading skills. Familiarity with large construction projects – industrial, large commercial, mechanical, and electrical systems, and/or electrical transmission and distribution experience. Experience in the design of power generation projects, including natural gas combined and simple cycle, wind turbine foundations, solar racking/trackers and the pile foundations, and rooftop solar systems is a strong differentiator. Familiarity with review of construction specifications and submittals. Familiarity with construction documentation such as ECN’s, CD’s, RFI’s, and NCR’s. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. Original Posting:April 9, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range:Pay Range $73,450.00 - $132,775.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit www.Leidos.com. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at www.leidos.com/careers/pay-benefits. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the U.S. Federal Trade Commission. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Job Description Who We Are Atwell, LLC is a bold leader in the consulting, engineering, and construction services industry, delivering a broad range of creative solutions to clients in the real estate & land development, and energy markets. We have a strong national presence and a diverse, award-winning project portfolio. Atwell is a privately owned company, with 2,000+ passionate team members across 70+ locations and growing! Atwell, LLC is a proud recipient of the following 2025 awards: • Ten consecutive years in a row as a "Best Place to Work" by Zweig Group (#11), • Recognized as #70 in the ENR Top 500 Design Firms, ranked in every region, • Recognized in Crain's "Fast 50" as one of the fastest-growing companies (#14), • Recognized as the 2025 ENR Design Firm of the year for the Southeastern US Position Overview: Atwell is seeking an experienced and strategic Director of Power Generation to lead a growing portfolio of projects across our Power & Energy team. This is a senior leadership role responsible for advancing utility-scale and large-scale infrastructure projects across Solar, BESS, Wind, Transmission, Substation, and related power delivery and generation systems. Discipline As the Director, you will lead a dynamic team of Associate Directors, Project Managers, and technical design staff, providing both technical leadership and client-facing expertise. This role will be instrumental in staff development, recruiting, operational execution, and annual business planning, helping drive sustainable growth and support company revenue goals across the broader Power Generation market. Key Responsibilities: • Lead and oversee Atwell's Power Generation efforts across utility-scale Solar, BESS, Wind, Transmission, Substation, and related power infrastructure projects throughout the U.S., • Provide strategic technical leadership and direction for engineering, design, and project execution efforts within the Power & Energy team, • Manage and mentor a team of Associate Directors, Project Managers, and technical staff, fostering a collaborative, accountable, and high-performing environment, • Act as a senior client liaison, building and maintaining strong client relationships while supporting project delivery from early-stage development through detailed design and execution, • Partner with internal leadership to grow and strengthen Atwell's presence across the broader Power Generation market, helping expand both existing client relationships and new business opportunities, • Develop, retain, and recruit top talent in engineering, project management, and technical leadership to support long-term team growth, • Drive annual business planning in collaboration with executive leadership, including revenue forecasting, staffing strategy, and market growth initiatives, • Oversee project budgets, schedules, staffing, and resource allocation to ensure strong project performance and successful client outcomes, • Support the continued evolution of internal processes, delivery standards, and team structure to improve consistency, efficiency, and scalability across Power Generation projects Qualifications: • Bachelor's degree in Electrical Engineering or a related field; PE license highly preferred, • Minimum of 12+ years of professional experience in Power & Energy, with strong experience supporting utility-scale or large-scale power generation and delivery projects, • Demonstrated experience across one or more of the following markets: Solar, BESS, Wind, Transmission, Substation, or broader power infrastructure, • Proven track record in client-facing leadership roles, with strong project management, communication, and relationship-building skills, • Demonstrated experience leading, developing, and mentoring multidisciplinary teams, with a passion for talent development and organizational growth, • Strong strategic planning and business leadership skills, including experience with annual planning, team development, and revenue growth initiatives, • Technical understanding of engineering and design workflows relevant to power generation and related infrastructure projects, • Ability to thrive in a remote work environment and travel as needed to support clients, projects, and internal team initiatives Pay Range - $140,000 - $190,000 base + Bonus + Benefits. Disclaimer While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you. Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team. #LI-TK1 Pay Range $1—$1 USD Atwell Benefits: To attract and retain the best professionals in the industry, we aim to provide an excellent working environment and a progressive benefits program designed to support your personal and professional needs. Work/Life: • Generous Paid Time Off, • Paid Parental Leave, • Flexible work schedules are available for some positions, • Tenure Awards — Travel Vouchers to see the world based on your travel preferences Compensation: • Competitive Compensation packages, • Annual bonuses, spot bonuses and peer recognition awards, • 401K match - 1:1 up to 4% of compensation, • Tuition Assistance, • Student Loan Repayment, • Paid Licensing / Certification Fees and Renewals, • Financial Rewards for Obtaining Licensure, • Employee Referrals, • Annual Wellness Reimbursement for anything wellness related (Gym memberships, fitness tracker, home gym equipment, etc.), • Dependent Care Match 'Atwell'ness: • Medical (BC/BS), Dental (Delta), and Vision (VSP), • Family Planning & IVF Benefits, • Pet Insurance, • Health Savings Account & Flex Spending Account options, • Employer paid LTD, STD, and life insurance, • Metlife Supplemental Benefits covering accident, hospitalization, and critical illness, • Member Assistance Program (MAP) with complimentary counseling sessions, legal benefits, financial consultations, and work/life referral services

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Your Impact: The Regional Manager, Solar O&M will lead and oversee operations and maintenance performance across the Colorado region, driving operational excellence, revenue growth, and customer satisfaction. This role is responsible for managing regional teams, optimizing service delivery, and strengthening relationships with key customers, contractors, and internal stakeholders. You'll play a critical leadership role in scaling solar service offerings, ensuring projects are executed efficiently, and aligning regional performance with company-wide goals. Core Responsibilities: Regional Leadership & Strategy • Lead all Solar O&M operations across the Colorado region, ensuring performance, safety, and profitability targets are met, • Develop and execute regional strategies to grow service offerings and market presence, • Provide leadership, coaching, and oversight to Field Operations Managers and regional teams Customer & Stakeholder Management • Serve as the primary point of contact for key regional customers, • Build and maintain strong relationships to drive retention and expansion opportunities, • Manage communication including incident reporting, performance reviews, and status meetings, • Resolve technical and commercial issues proactively Operational Excellence • Oversee multiple projects to ensure timely, on-budget, and high-quality execution, • Monitor KPIs such as response time, repair time, and preventive maintenance completion, • Drive continuous improvement initiatives across regional operations, • Ensure compliance with contractual, technical, and safety requirements Financial & Performance Management • Manage regional P&L, including revenue, cost of goods sold, and profitability, • Monitor accounts receivable and address overdue balances, • Contribute to Annual Operating Plan (AOP) and forecasting, • Identify and capture all billable work opportunities Vendor & Contractor Management • Oversee subcontractor relationships, onboarding, and performance, • Partner with Procurement to evaluate vendors, negotiate pricing, and improve coverage, • Strengthen contractor network across the region Sales & Growth Support • Identify new business opportunities within existing and new accounts, • Support sales efforts with pricing, proposals, and contract review, • Align operational capabilities with market demand and customer needs Compliance & Site Oversight • Conduct periodic site visits to ensure quality and safety standards are met, • Ensure adherence to OSHA and company safety protocols, • Maintain accurate documentation and reporting standards EXPERIENCE and QUALIFICATIONS: • 5+ years of project management or operations experience in solar, electrical, or industrial environments, • 3–5 years of leadership experience managing teams or regional operations, • Strong knowledge of electrical systems, construction, and maintenance practices, • Proven ability to manage customer relationships and drive business growth, • Experience with contracts, pricing strategies, and operational KPIs, • Strong communication, analytical, and organizational skills, • Proficiency in Microsoft Office (especially Excel), • Self-starter who thrives in a fast-paced, high-growth environment Physical/Work Environment At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. • Travel up to 25% within the Colorado region, • Ability to work occasional weekends/holidays and be on-call as needed, • Must comply with all OSHA and company safety standards At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$95,000—$115,000 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Description Looking for an opportunity to make an impact? The Leidos Energy, Infrastructure, and Automation operation helps solve utilities’ complex challenges through our full life-cycle, performance-based solutions. Our services include engineering, planning, project management, construction management, and commissioning for electric power substations and transmission and distribution lines; protection and controls design; and electrification programs. Utilities consistently come to Leidos for reliable power expertise, as reflected through our work with more than 75 investor-owned utilities and more than 100 municipals/cooperatives across the country as well as a growing number of private developers. Your greatest work is ahead! Leidos' Energy and Infrastructure Consulting (E&IC) Division is hiring for a Power Plant Subject Matter Expert (Electrical Engineer). You will apply a strong working knowledge of electrical design, construction, operation and maintenance, and interconnection of power generation facilities, as well as related contractual agreements. The candidate is expected to work in a team setting to support project managers during transactional due diligence. As a valued team member, you will work in a fast-paced, collaborative environment with opportunities for career development and growth. Location: Fully remote but must be currently located within the United States. Commuting distance to Denver, CO or Framingham, MA is a plus. What you’ll be doing: Perform electrical design and interconnection review of power plant, substation, and transmission projects and prepare associated reports. Attend power plant, substation, and transmission project meetings to confirm status of site E&IC construction and operation and maintenance. Manage client engagements and ongoing relationships. Clients will include private equity, infrastructure, and hedge funds, investment and commercial banks, private developers, legal and financial advisors, original equipment providers, DOE, and EIA. Present work product results and findings to client executives. Conduct business development activities both through internal collaboration and directly with clients and prospects. Support projects and project team members working both independently and in collaboration with other colleagues and managers. Develop and expand key client relationships. What does Leidos need from me? Bachelor’s degree in Electrical Engineering required with eight plus years of experience in electrical operation, maintenance and/or design of power generation and substation assets or similar experience, including specific knowledge of AC and DC electrical systems, controls, and protection relaying. Experience with or ability to apply oneself to a broad range of power generation technologies, including wind generation, solar PV generation, battery energy storage systems, and thermal generation. Successful track record maintaining client relations and working with clients both internal and external. Professional Engineering (PE) licensure is preferred. The job may require as much as 25 percent travel. Working knowledge of Microsoft Word and Excel. Favorable if you have: Direct experience with electrical equipment such as synchronous generators, excitation, inverters, motors, transformers, circuit breakers, disconnect switches, capacitor banks, and transmission lines is a plus. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. April 29, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $131,300.00 - $237,350.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit _. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at _. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at _. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the _. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

Job DescriptionBenefits: • Spiffs, Rewards, & Employee Contests, • Competitive Compensation, • Paid Vacation, • 401(k), • Bonus based on performance, • Health insurance, • Training & development, • Dental insurance, • Opportunity for advancement, • Vision insurance The Service Dispatcher, under the supervision of the Office Manager, plays a crucial role in supporting the administrative and operational aspects of the Service Department. About the Role We are seeking a highly organized and proactive Dispatch, Outreach, and Office Coordinator to join our team. This position is the central hub of daily operationsbalancing technician scheduling, customer communication, lead tracking, and administrative support. The right candidate will thrive in a fast-paced environment, take initiative, and ensure that both our operations teams and customers experience seamless, professional support. Key Responsibilities Scheduling & Dispatching • Receive and prioritize incoming service requests from customers., • Schedule and dispatch HVAC technicians for service calls, installations, and maintenance jobs., • Adjust routes and schedules in real time to maximize efficiency and handle emergencies, delays, or cancellations., • Conduct daily follow-ups on outstanding leads and open service tickets. Customer Service & Communication • Act as the main point of contact for customers, technicians, and management., • Answer inbound calls and emails related to service requests, scheduling, and pricing., • Provide courteous, accurate, and timely responses to customer inquiries, including warranties and follow-ups., • Document and address customer concerns, ensuring prompt resolution and satisfaction., • Maintain customer records, service histories, and warranties in company software (Sera). Monitoring & Support • Track technician progress throughout the day and provide operational support as issues arise., • Monitor job completion and confirm customer satisfaction (including Happy Calls post-service)., • Report recurring service issues and inefficiencies to management., • Ensure technicians have proper tools, materials, and information before jobs. Lead Tracking & Outreach • Monitor and track new leads from platforms such as Angi, Yelp, Bullseye Pro, Google Local Services, and others., • Provide reporting on lead sources, conversion rates, and outreach effectiveness., • Support marketing efforts by coordinating follow-ups on incoming leads. Office Coordination & Administrative Support • Intake and process customer calls, creating/updating job records in Sera., • Manage workflow between service and install teams, ensuring jobs move smoothly from sales through completion., • Handle permits, inspections, warranties, and parts orders., • Maintain compliance with company policies, warranties, and safety requirements., • Prepare detailed reports for management, including service performance, audits, and quality assurance. Qualifications • 2+ years of experience in dispatching, scheduling, office coordination, or related administrative roles (HVAC/Service industry experience preferred)., • Strong multitasking and organizational skills with the ability to adjust priorities quickly., • Excellent communication skillsboth written and verbal., • Proficiency with scheduling/dispatch software (experience with Sera a plus)., • Problem-solving mindset with the ability to remain calm under pressure., • Comfortable with customer-facing interactions and conflict resolution.Why Join Us?, • Be part of a growing and respected HVAC/Electrical/Solar company., • Work in a dynamic role where no two days are the same., • Competitive pay and benefits package., • Opportunity to directly impact customer experience and operational efficiency.THIS IS NOT A REMOTE POSITION How to Apply: Submit your resume and cover letter to https://sites.google.com/controllingsystemsco.com/csi-application/home .

Job DescriptionAt ANS, we’re not just a consulting engineering firm, we’re a team of trailblazers shaping the future of civil, structural, and geotechnical engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we’re headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! WHY YOU’LL LOVE WORKING HERE- A supportive, dynamic, and innovative team culture.- Opportunities to attend industry events and showcase your skills.- A chance to directly shape the voice and vision of one of the industry’s fastest-growing firms. As a Designer II - Civil, you will join our growing civil engineering team and contribute to a variety of civil design projects. The ideal candidate will work with moderate supervision to develop high-quality construction plans and technical exhibits using Civil 3D. This role involves applying civil design principles, coordinating with engineers and other disciplines, and supporting project execution from concept through final deliverables. You will be expected to take ownership of assigned design tasks, solve routine design challenges independently, and continue developing technical expertise across grading, drainage, stormwater, and site development projects. Job Responsibilities: • Utilize AutoCAD Civil 3D to produce engineered construction plans and sheet setups, including plan views, profiles, grading plans, drainage layouts, and construction details., • Apply civil design principles to support site grading, drainage design, erosion and sediment control, and stormwater management solutions for renewable energy projects., • Work closely with civil engineers to interpret design intent and translate it into accurate CAD drawings., • Coordinate with electrical and structural teams to support multidisciplinary project execution., • Apply internal and client drafting standards while maintaining quality control across project deliverables., • Evaluate routine design alternatives for constructability, code compliance, and site challenges., • Support project teams in meeting deadlines and delivering high-quality work with increasing independence., • Help improve CAD workflows, templates, and drafting consistency across projects.Position Requirements:, • An associate or technical degree in CAD, civil engineering technology, or a related field is required., • Two to four years of experience in civil design with proficiency in AutoCAD Civil 3D., • Working knowledge of civil design principles including grading, drainage, and stormwater management., • RENEWABLES experience, specifically solar design, is preferred., • Ability to work independently on assigned tasks while collaborating effectively with engineers and project teams., • Strong attention to detail, problem-solving ability, and commitment to quality., • Willingness to continue growing technical knowledge and project responsibility.Benefits:, • 401(k) + company match, • Health, dental, and vision insurance, • Life insurance, • Unlimited PTO, • Professional development assistance, • Bonus opportunities, • Supportive, growth-oriented team environment Ready to join us? If you’re passionate about clean energy design, precision engineering, and turning data into impact, we want to meet you! Join us in shaping the next generation of solar and battery storage projects—and help transform ANS into the name everyone in renewables knows. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Wanco Inc. is an industrial manufacturer seeking an experienced Sr. Mechanical Engineer to design, research, build, test, and improve mechanical and electrical products, equipment, and systems. The preferred candidate will be proficient in SolidWorks and in the design and fabrication of weldments using steel and aluminum structural elements. Experience with solar and diesel engine/generator-powered products is a plus. The practice of DFM and DFA are also essential, along with experience working in fabrication and assembly environments. The ability to work effectively within a document control system is a must. What you need to have: • MSME degree + 7 years of applicable experience, or BSME + 10 years of applicable experience., • Superb creativity, vision, and problem-solving skills., • Excellent interpersonal skills and self-confidence., • Extensive experience in product design in a production facility., • Ability to make decisions in high-stress situations., • Great written and verbal communication skills. Duties and Responsibilities: This includes but is not limited to: • Analyze mechanical problems and develop and implement complete solutions., • Execute through all phases of the process with a great sense of urgency., • Work within a budget to deliver safe and efficient products on time., • Use resources and time effectively., • Own the development of products from concept through to production., • Work as part of an immediate team including Mechanical, Electrical and Software Engineers, Drafters, Technicians, Managers, Executives, and those from other organizations including Purchasing, Fabrication, Production and suppliers., • Attend meetings and communicate effectively with team members, execs and customers., • Prepare and supervise the preparation of mechanical engineering drawings - driving schedules, quantities, and cost for new product designs and existing product maintenance., • Communicate with suppliers, both domestic and overseas, and participate actively in driving parts quality to meet all specifications. When drawings are not adequate, update accordingly. Physical Requirements: · Shift: M-F, · Mobility to work in an office and factory setting including the use of standard equipment, including a computer. Reporting: This position has no direct reports and reports to the Director of Engineering Salary Range: $45.00 - $55.00 per hour Overtime is available Address: 5870 Tennyson Street, Arvada, CO 80003 | 303-427-5700 | wanco.com Company DescriptionWanco is the industryʼs leading manufacturer of highway safety and traffic control products. Innovation and new product development have made us what we are, and will continue to carry our reputation forward, well into the future. Wanco provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.Wanco is the industryʼs leading manufacturer of highway safety and traffic control products. Innovation and new product development have made us what we are, and will continue to carry our reputation forward, well into the future.\r\n\r\nWanco provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description People + Problem Solving = Progress Excellence Through People! Take your engineering career to the next level by working with energetic, talented, and forward-thinking colleagues and clients who invest in the collective good, take a balanced approach to sustainable solutions, are flexible to the realities of complex changes, and provide genuine effort to do the right by others. What We Are Looking For: A Senior Renewable Electrical Engineer to join our growing renewables team and lead the design and execution of utility-scale solar projects. This role offers the opportunity to provide technical leadership, collaborate with cross-functional teams and clients, and drive high-quality electrical solutions that support the continued growth of our renewable energy portfolio. Preferred to have someone hybrid at one of our PSE offices, but open to remote candidates. What You Will Be Doing: • Embrace, uphold, and live out PSE’s core values around People, Problem-Solving, and Progress., • Lead the design and engineering of utility-scale solar PV, energy storage (BESS), and microgrid projects ranging from 5 MW to 100+ MW, including standalone and hybrid systems., • Provide technical expertise and support in assisting clients in planning for integrating renewable energy resources., • Develop and review engineering construction documents, including drawings, one-lines, and equipment specifications., • Perform and oversee electrical system studies such as load flow, short circuit, arc flash, grounding, ampacity, and protection coordination., • Provide technical expertise and guidance to clients on integrating renewable energy resources into the power grid., • Coordinating project design assignments and design teams locally and with other office locations., • Oversee equipment selection and evaluation for renewable energy systems., • Manage electrical scope for projects of varying size, including scheduling, resourcing, and delivery., • Communicate project status and technical information to internal stakeholders, clients, and vendors., • Occasional travel to project sites (approximately 10%) to gather site-specific data as needed. What You Will Need: Education and Experience • Bachelor’s degree in Electrical Engineering or other related disciplines., • 8-10 years experience in the renewable energy industry., • Professional Engineer (PE) license of Engineer-in-Training (EIT) certification, or the ability to obtain a PE license within a reasonable timeframe., • Eligible to work in the United States without visa sponsorship. Knowledge and Skills • Experience with AutoCAD, PVsyst, SKM, ETAP, SEL Relays., • Excellent written and verbal communication., • Strong project management skills with the ability to organize, prioritize, and manage multiple tasks and resources effectively., • Ability to work and meet deadlines in a fast-paced environment., • Willingness to learn and adapt to evolving renewable energy technologies and design practices. Compensation: • Salary Range: $125,262 - $147,649 annually. This salary range reflects the anticipated base pay for candidates with approximately eight to fifteen years of relevant experience. Candidates with additional experience will be considered for higher compensation. The final offer will be determined based on the candidate’s experience, education, and technical expertise. Benefits: • Discretionary annual performance-based profit-sharing bonus, • 401(k) retirement plan and employer safe harbor contribution, • Cell phone reimbursement, • Comprehensive health, health savings account (HSA), dental, vision, flexible spending account (FSA) & dependent care reimbursement account, • Life insurance, short & long-term disability, and other voluntary coverages, • Employee Assistance Program (EAP), • Paid time off, including holidays and volunteer time off (VTO) to serve our communities., • Professional development opportunities and educational assistance PSE is an equal opportunity employer that encourages all its employees to grow, learn, and expand their roles in ways they can be creative and best accomplish the client’s needs. We assess qualified applicants without regard to race, color, religion, sex, disability, sexual orientation, gender identity, national origin, veteran status, and other legally protected characteristics. Disclaimer: We are committed to fairness and transparency in our hiring process. Compensation may be adjusted based on the candidate’s experience, education, qualifications, market conditions, and internal equity. PSE (Power System Engineering) We want you to grow. We want you to learn. We want you to expand with us.

Job Description Crusoe is on a mission to accelerate the abundance of energy and intelligence. As the only vertically integrated AI infrastructure company built from the ground up, we own and operate each layer of the stack — from electrons to tokens — to power the world's most ambitious AI workloads. When you join Crusoe, you join a team that is building the future, faster. We're in the midst of the greatest industrial revolution of our time. The demand for AI compute is boundless, and power is a bottleneck. We're solving that — with an energy-first approach that makes AI infrastructure better for the world and faster for the people innovating with AI. We're looking for problem-solving, opportunity-finding teammates with a sense of urgency, who believe in the scale of our ambition and thrive on a path not fully paved — people who want to grow their careers alongside a team of experts across energy, manufacturing, data center construction, and cloud services. If you want to do the most meaningful work of your career, help our customers and partners advance their AI strategies, and be part of a high-performing team that believes in each other, come build with us at Crusoe. About This Role: Crusoe is building the world's favorite AI-first cloud infrastructure company, pioneering vertically integrated, purpose-built AI infrastructure solutions trusted by Fortune 500 companies. As a Senior/Staff Instrumentation and Controls Engineer, you'll significantly contribute to the design, implementation, and management of critical control systems for Crusoe’s cutting-edge Power Generation solutions. You'll oversee the entire project lifecycle for power generation controls, from initial design and installation to optimization, Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), commissioning, and initial operations support. Your expertise in instrumentation, controls systems, data analysis, and energy optimization will be vital in delivering scalable and sustainable solutions that ensure the reliable and efficient operation of our facilities, accelerating abundance of energy and intelligence. This is a full-time position. What You’ll Be Working On: Technical Problem-Solving: Provide high-level expertise, strategic direction, and technical support and knowledge for complex problem-solving related to the design and operation of Crusoe Power Generation Plant control systems. System Integration: Collaborate closely with electrical and mechanical engineers to seamlessly integrate control systems with other critical plant systems. Installation Oversight: Oversee the installation of control systems, ensuring they meet precise design specifications and adhere to stringent industry standards. System Testing and Coordination: Conduct and coordinate comprehensive testing of control systems to verify correct and safe operation, including Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT). Commissioning Leadership: Lead the commissioning process, working hand-in-hand with the project team to bring power plants online, efficiently troubleshoot issues, and ensure smooth startup operations. Real-time Monitoring & Data Collection: Manage the implementation of systems for real-time monitoring and robust data collection to continuously assess and optimize the performance of power generation systems. Operational Support: Provide essential technical support during the initial operation phase, proactively addressing any control system-related issues that may arise. Training & Documentation: Train operations staff on the effective use of control systems and develop clear, comprehensive documentation, training materials, and operational procedures. Safety & Regulatory Compliance: Ensure that all control systems strictly comply with relevant safety standards and regulations, promoting a secure operational environment. Fail-Safe & Redundancy Implementation: Develop and implement advanced fail-safe and redundancy measures to proactively prevent accidents and enhance the safety and reliability of plant operations. Quality Assurance Leadership: Drive continuous improvement by establishing and rigorously enforcing Crusoe Instrumentation & Controls standards across all projects, ensuring maximum operational integrity and reliability. Project Planning & Resource Allocation: Actively participate in project planning, scheduling, and strategic resource allocation for all control systems-related tasks. Technology Advancement: Stay continuously updated on the latest technologies and advancements in control systems and power generation, applying new insights to our operations. System Upgrades & Optimization: Propose and implement strategic upgrades to improve system performance, reduce operational costs, or increase efficiency as new technologies emerge (SCADA, DCS, and PLC Control Systems). Ambiguity Resolution: Bring structural clarity to ambiguous situations and drive cross-functional alignment to reach clear design decisions. Project Execution & Communication: Drive complex projects and tasks to completion, translating telemetry and network diagrams into clear plans for stakeholders. What You’ll Bring to the Team: Educational Foundation: Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Controls/Automation Engineering, or a related scientific/technical field is required. Power Systems Experience: Professional experience in a power systems environment, demonstrating practical, hands-on knowledge of utility-scale power generation operations. Controls System Expertise: Proven professional experience in control systems, electrical power management systems, controls engineering, or a closely related field. Technical Understanding: Strong understanding of mechanical systems, electrical systems, PLCs, and industrial control systems. Collaboration Skills: Demonstrated ability to collaborate effectively across departments to meet challenging organizational goals. Communication Proficiency: Excellent communication skills, with the ability to clearly present complex technical information to non-technical stakeholders. Data-Driven Passion: A strong passion for leveraging data to continuously improve system performance and enhance operational efficiency. Bonus Points: Master’s degree in an engineering discipline or active Professional Engineer (PE) License. Experience with Power Plant DCS (Distributed Control Systems) or PLC-based Control Systems. Specific experience with systems such as SEL PowerMax, SEL RTAC, Ignition SCADA, Ignition Historian, Canary Historian, GE Mark VIE Turbine Control Systems, Solar Rockwell PLC, AllenBradley PLCs, ComAp, ESM 2 Waukesha, or similar platforms. Active industry credentials such as Certified Energy Manager (CEM) or Project Management Professional (PMP). Benefits: Competitive compensation and equity packages Restricted Stock Units Paid time off, paid holidays & leave of absence programs Comprehensive health, dental & vision insurance Employer contributions to HSA account Paid parental leave Paid life insurance, short-term and long-term disability Professional development & tuition reimbursement Mental health & wellness support Commuter benefits (parking & transit) Cell phone stipend 401(k) Retirement plan with company match up to 4% of salary Volunteer time off Global travel insurance & emergency assistance Daily meals allowance Additional perks & programs specific to location Compensation: Compensation will be paid in the range of $150,000 - $170,000 + Bonus. Restricted Stock Units are included in all offers. Compensation to be determined by the applicant’s education, experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job DescriptionAt ANS, we’re not just a consulting engineering firm, we’re a team of trailblazers shaping the future of civil, structural, and geotechnical engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we’re headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! WHY YOU’LL LOVE WORKING HERE- A supportive, dynamic, and innovative team culture.- Opportunities to attend industry events and showcase your skills.- A chance to directly shape the voice and vision of one of the industry’s fastest-growing firms. As a Designer III - Civil , you will join our growing civil engineering team and contribute to a wide range of projects. The ideal candidate will work under minimal supervision, applying advanced CAD skills to produce high-quality construction plans and exhibits. This role involves collaborating with engineers and other disciplines, mentoring junior staff, and helping maintain CAD standards. You will play a key role in solving design challenges and ensuring compliance with project requirements.Job Responsibilities: • Utilize Civil 3D to produce engineered construction plans and sheet setups, including plan views, sections, elevations, and details., • Apply concepts for site grading, storm drainage, erosion and sediment control, and stormwater best management practices., • Work closely with civil engineers to interpret design intent and translate it into accurate CAD drawings., • Coordinate with other disciplines such as survey, electrical, geotechnical, and structural engineering to ensure design integration., • Evaluate design alternatives for constructability, code compliance, and site challenges., • Coach and mentor junior designers while assisting in developing and maintaining CAD standards and templates.Position Requirements:, • An associate or technical degree in CAD, civil engineering technology, or a related field is required., • Four to eight years of experience in civil design, with strong proficiency in Civil 3D., • Solid understanding of civil design principles, including grading, drainage, and stormwater management., • Ability to work independently with minimal supervision and collaborate effectively across disciplines., • Strong problem-solving skills and attention to detail.Benefits:, • 401(k) + company match, • Health, dental, and vision insurance, • Life insurance, • Unlimited PTO, • Professional development assistance, • Bonus opportunities, • Supportive, growth-oriented team environment Ready to join us? If you’re passionate about clean energy design, precision engineering, and turning data into impact, we want to meet you! Join us in shaping the next generation of solar and battery storage projects—and help transform ANS into the name everyone in renewables knows. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionSeeking an experienced Sr. Mechanical Engineer to design, research, build, test, and improve mechanical and electrical products, equipment, and systems. The preferred candidate will be proficient in SolidWorks and in the design and fabrication of weldments using steel and aluminum structural elements. Experience with solar and diesel engine/generator-powered products is a plus. The practice of DFM and DFA are also essential, along with experience working in fabrication and assembly environments. The ability to work effectively within a document control system is a must.What you need to have: • MSME degree + 7 years of applicable experience, or BSME + 10 years of applicable experience., • Superb creativity, vision, and problem-solving skills., • Excellent interpersonal skills and self-confidence., • Extensive experience in product design in a production facility., • Ability to make decisions in high-stress situations., • Great written and verbal communication skills.Duties and Responsibilities:, • Analyze mechanical problems and develop and implement complete solutions., • Execute through all phases of the process with a great sense of urgency., • Work within a budget to deliver safe and efficient products on time., • Use resources and time effectively.Own the development of products from concept through to production., • Work as part of an immediate team including Mechanical, Electrical and Software Engineers, Drafters, Technicians, Managers, Executives, and those from other organizations including Purchasing, Fabrication, Production and suppliers., • Attend meetings and communicate effectively with team members, execs and customers., • Prepare and supervise the preparation of mechanical engineering drawings - driving schedules, quantities, and cost for new product designs and existing product maintenance., • Communicate with suppliers, both domestic and overseas, and participate actively in driving parts quality to meet all specifications. When drawings are not adequate, update accordingly.

Job DescriptionAt ANS, we’re not just a consulting engineering firm—we’re a team of trailblazers shaping the future of multi-disciplinary engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports, and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we’re headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! Our team includes professionals licensed in over 20 states, with more than 70 years of collective experience. We pride ourselves on fostering a collaborative and supportive work environment that encourages growth and professional development. At ANS, you’ll enjoy paid vacation, sick, and personal time off; support for continuing education and community involvement; and comprehensive healthcare, vision, and dental benefits for eligible employees. WHY YOU’LL LOVE WORKING HERE- A supportive, dynamic, and innovative team culture.- Opportunities to attend industry events and showcase your skills.- A chance to directly shape the voice and vision of one of the industry’s fastest-growing firms. As our Civil Engineer II, you’ll be joining our growing civil engineering team. The ideal candidate will collaborate with our multi-disciplinary team to develop a diverse range of renewable energy projects (PV, BESS, HV, Wind).Job Responsibilities: • The Civil Engineer will work under a Project Lead (PE) on multi-discipline projects. They will interact directly with our internal hydrology, geotechnical, structural, and electrical engineering teams., • The role requires technical skills in Civil Engineering design including grading, drainage, erosion and sedimentation control, stormwater management, and SWPPP calculations and reports., • They will utilize Civil 3D including alignments, profiles, and grading features to produce engineered construction plans with minimal oversight, • Complete stormwater and E&S calculations to ensure quality standards are met for Engineers to stamp construction drawings and reports., • Ability to engage in multiple projects to complete successful requirement deliveries, • Experience in dealing with regulatory agencies and review professionals in order to assist with permitting and coordination with regulatory agencies, • On occasion with may perform site visits to validate site constraints and civil design solutions.Position Requirements:, • Bachelor’s degree in civil engineering is required, • FE or EIT is strongly encouraged, • Professional Engineer is nice to have, • Proficiency in design software such as Civil 3D, HydroCAD strongly preferred, • Proficiency in software such as HEC-RAS, GIS, PV CASE nice to have, • Experience in renewable energy projects such as solar, wind, or battery storage is preferred., • 3-5 years of experience.Benefits:, • 401(k) + company match, • Health, dental, and vision insurance, • Life insurance, • Unlimited PTO, • Professional development assistance, • Bonus opportunities, • Supportive, growth-oriented team environment Ready to join us? If you’re passionate about clean energy design, precision engineering, and turning data into impact, we want to meet you! Join us in shaping the next generation of solar and battery storage projects—and help transform ANS into the name everyone in renewables knows. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description About Urban Sky: Urban Sky is a venture-backed aerospace startup that pioneers utilization of the stratosphere and reimagines the way humans view and analyze the earth. We design, build, operate, and sell stratospheric balloon systems, and the data we collect supports a wide range of applications, from real-time wildfire monitoring to urban mapping. Our technology is also employed by government customers including the Department of Defense (DoD), NASA, and others. Urban Sky sends flight vehicles to the stratosphere on a weekly basis. Our team consists of engineers, makers, developers, and doers who believe in the power of human potential when passion meets utility within a small, supportive team. At Urban Sky we strive to create a team culture grounded in candor, inclusion, respect and empowerment. We aim to build the next chapter of stratospheric history in Denver and are seeking self-starting, open-minded, and hard-working team members. About The Role: The Senior Electrical Engineer is a hands-on technical leader responsible for the architecture, design, and validation of electrical systems for the Super Pressure Balloon project, including flight avionics, power distribution, battery/solar energy systems, CAN/RS-485 networks, satellite communications, sensor interfaces, motor/winch control electronics, and termination/cutter circuits. This role will develop design solutions that operate reliably in the stratospheric environment and support long-duration, altitude-controlled flight, rapid ground and flight test iteration, and transition from prototype builds to repeatable flight hardware. This is a highly cross-functional role that touches bus avionics, Super Pressure flight electronics, motor control, and distributed power, BMS/charge controllers, pressure sensing, GPS/satcom, winch electronics, and ground/acceptance-test equipment - amongst a growing set of electronic applications. Beyond owning design, you will mentor engineers on the Super Pressure electrical and integration team, drive rigorous board checkout and validation processes, and engage directly with flight operations, manufacturing, systems engineering, and customer/program stakeholders to translate mission feedback into the next generation of hardware. Key Responsibilities: • Develop mature electrical design solutions that are manufacturable at scale and qualified to operate reliably in the stratospheric environment (low pressure, wide thermal excursions, radiation, thermal vacuum considerations) and the specific Super Pressure mission environment, including long-duration power constraints, autonomous recovery from fault modes, and field-maintainable flight hardware., • Own architecture and design of electrical systems spanning Super Pressure flight avionics, distributed power, battery packs/BMS, solar charging, downstream DC/DC conversion, CAN/RS-485 networking, satellite communications, GPS/GNSS, pressure/temperature sensing, winch/motor control, cutter/termination circuits, and bus/interconnect boards., • Own power-budget and electrical-architecture trades for day/night mission profiles, battery/solar sizing, load shedding, comms blackouts, modular mission configurations, and fault-tolerant operation., • Serve as a technical mentor within the Super Pressure cross-functional product team - providing guidance on best practices, technical review, and coaching junior engineers through complex design trades., • Participate in end-user engagement to gather operational feedback and translate it into concrete design iteration priorities and requirements for SPV, optical flight test, ground test, and production-transition hardware., • Develop and deliver on electrical engineering design schedules, including milestone definition, risk tracking, and cross-discipline coordination with mechanical, software, firmware, systems engineering, flight operations, manufacturing, test, and program management., • Own hands-on checkout and diagnostic evaluation of boards - this role is not limited to a desk. You should be equally comfortable in Altium and at the bench with an oscilloscope, logic analyzer, and power analyzer debugging battery-powered flight systems, CAN/satcom interfaces, power converters, motor drivers, sensor boards, and termination circuitry., • Drive the board checkout process and develop the test hardware, fixtures, and procedures needed to validate complex functionality ahead of system-level integration including pressure-sensor acceptance testing, burst/leak instrumentation, cutter timing tests, power-system characterization, environmental/thermal-vacuum testing, and integrated SPV flight checkout., • Lead design reviews (requirements, schematic, layout, and post-manufacturing) and enforce a high bar for design rigor, documentation, and traceability across prototype, flight-test, and production-intent configurations., • Define and uphold EEE parts selection standards, derating practices, and reliability screening appropriate for near-space hardware including low-pressure creepage/clearance, conformal coating, COTS component life-cycle risk, second-source planning, and country-of-origin constraints where applicable., • Partner with manufacturing and supply chain to ensure DFM/DFT, component availability, and second-source strategies support production ramp and rapid build/test cycles for SPV1/SPV2 and related flight articles., • Contribute to EMI/EMC planning, grounding architecture, and power distribution strategy across the vehicle including RF compatibility with GPS/satcom/radio payloads, metallized-envelope implications, harnessing, shielding, and GPS-denied or comms-degraded operating cases., • Support flight and field operations as needed, including anomaly investigation and root-cause analysis of returned hardware and telemetry-informed fault isolation from ground tests, optical flight tests, and long-duration SP flights., • Collaborate closely with firmware and software engineers to integrate telemetry, health monitoring, watchdog/reset tracking, nonvolatile configuration, battery data, comms recovery, and autonomous safe-state behavior., • Develop and maintain electrical ICDs, wiring diagrams, bring-up checklists, verification procedures, and test reports that let technicians and operators build, inspect, and fly the system repeatably. Qualifications: • B.S. or M.S. in Electrical Engineering, Computer Engineering, or a related discipline., • 7+ years of professional electrical engineering experience, including demonstrated ownership of hardware from concept through production or flight-test deployment., • Deep expertise in mixed-signal PCB design: schematic capture, multi-layer layout, embedded flight electronics, rugged sensor interfaces, low-noise analog/digital measurement, protection circuits, grounding, and harness-aware board design., • Hands-on experience with motor control electronics (BLDC/stepper, current sensing, closed-loop control) and power electronics (DC-DC conversion, power sequencing, protection) including battery packs/BMS, solar charge control, load switching, power budgeting, and low-power duty cycling., • Proven track record bringing up new boards - power-on, debug, characterization, and validation against requirements with enough discipline to turn ad-hoc bench learning into repeatable procedures and acceptance tests., • Proficiency with industry-standard EDA tools (Altium Designer or equivalent) and lab instrumentation (oscilloscopes, logic analyzers, spectrum analyzers, source meters) plus power analyzers, electronic loads, thermal chambers, and environmental-test instrumentation., • Experience designing for harsh environments - aerospace, automotive, defense, or equivalent - with understanding of thermal, vibration, and environmental qualification and specific interest in low-pressure, high-altitude, low-temperature, and long-duration power-limited operation., • Experience with CAN/CANopen or RS-485 networks, UART/SPI/I2C sensor integration, serial satellite modems, GPS/GNSS modules, and distributed-node architectures., • Experience defining system-level power budgets, derating/protection strategy, grounding, shielding, and EMI/EMC approach for battery-powered electromechanical systems. Nice-to-Haves/Preferred Skills: • Experience with stratospheric, space, UAV, or high-altitude systems., • Familiarity with RockBLOCK/Iridium, Starlink-class satcom, low-bandwidth telemetry strategies, GPS/GNSS integration, and power-aware comms architecture., • Experience with pressure sensing, precision measurement, low-power sensor nodes, flight telemetry, and acceptance-test instrumentation., • Working knowledge of radiation effects (TID, SEE) and mitigation strategies for COTS electronics., • Familiarity with aerospace quality and reliability standards (e.g., IPC Class 3, AS9100, MIL-STD-810, MIL-STD-461)., • Experience with Python, C, or embedded firmware sufficient to write test scripts and bring-up utilities and to collaborate effectively on telemetry, watchdog, boot-state, and autonomous recovery features., • Prior experience establishing board checkout procedures and automated test fixtures for a growing hardware team including ground-support equipment, environmental screening, and flight-readiness verification., • Experience with conformal coating, creepage/clearance, and reliable operation of approximately 48 V battery systems in low-pressure environments., • Experience designing, testing, or qualifying termination, hot-cutter, pyro-cutter, valve, heater, or other safety-critical control circuits., • Experience working at the intersection of electrical, mechanical, firmware, manufacturing, and flight operations for fielded hardware. Requirements: • Must be US Citizen or Permanent Resident, • Must be located near Denver, CO Benefits: • Equity, • Medical, Vision and Dental, • Unlimited Vacation Days, • Parental Leave, • Cell Phone Bill Stipend, • Stock Options Urban Sky is required to post this salary range per Colorado law. Your salary will be determined based on your abilities and experience. Colorado Pay Transparency$140,000—$180,000 USD NOTE: Research suggests that women and BIPOC individuals may self-select out of opportunities if they don't meet 100% of the job requirements. We encourage anyone who believes that they have the skills and the passion necessary to succeed here to apply for this role. This position may require the candidate to deal with commodities, software, technology, defense articles, and/or technical data which are subject to the Export Administration Regulations and/or the International Traffic in Arms Regulations. Additional information may be requested so as to determine whether export authorization is required from the Bureau of Industry and Security and/or the Directorate of Defense Trade Controls. If authorization is required, employment will be contingent upon the Company successfully obtaining such authorization from the relevant government agency. Urban Sky is an equal opportunity employer, and we value diversity. All employment is decided on the basis of qualifications, merit, and business need.

Job Description Bosch Building Technologies – Systems Engineer II About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: This position is responsible for integrated security system design and review of system functionality to determine proper operation of access control, IP video and other security systems and controls. Responsibilities: • Prepare drawings and wiring diagrams, based upon project plans and specifications, showing locations of devices, equipment, and wiring etc. for low voltage electrical projects., • Develops functional design, construction drawings, relay settings, and equipment specifications for protection, control, and communications equipment., • Preparing electrical construction documents for both building renovations and new construction projects., • Designing and applying low voltage systems, including security networks, IP Video, mass notification, and security systems., • Responsible for all aspects of low voltage design within designated projects., • Conducts surveys to gather field data; prepares drawings, layouts, and other visual aids; prepares technical construction drawings. Reviews the development of designs for compliance with applicable codes, adopted engineering standards, and good engineering practices., • Deliver technical presentations to internal and external audiences as required as part of the design process., • Work in a close team environment with Sales, Project Management, and Installation Departments, • Work with CAD Drafters to produce installation and drawing packages., • Engineering sales support and review of the functionality and design of systems being proposed by account managers., • Set-up and test new products and design concepts such as network devices, custom designed systems, etc., • Coaching and Mentoring of System Designers and Systems Engineers as requested. Required Qualifications: • High School diploma or equivalent, • Technical 2 year degree or better and/or 3-5 years of security industry design experience, • Experience engineering low voltage systems, preferably experience with AV, DAS and/or Structured Cabling as well., • Certification in 2 Access Control platforms or equivalent documented experience, • Certification in 2 Video Management platforms or equivalent documented experience, • Certification in 1 Intrusion platform or equivalent documented experience, • Knowledge of NEC Code and low voltage systems, • Proficiency with Microsoft Office and computerized business systems, • Valid US drivers license, • Ability to pass pre-employment screening Preferred Qualifications: • Certification in Networking and/or SQL., • General knowledge of network security principals including data routing, switching, wireless radios, multicasting, VPNs, Enterprise VMS, AV, DAS and/or Structured Cabling, and Enterprise level Access Control Systems. Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. • Must be able to effectively communicate, (ie see, hear, speak and write clearly) in order to communicate with colleagues and/or customers; manual dexterity required for occasional reaching, lifting of light office objects, and operating office equipment Working Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • The office is clean, orderly, properly lighted and ventilated. Noise levels are considered low to moderate Additional Information: • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Travel Requirements: No travel required, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program, • Pet Insurance Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email talentacquisitionteam@climatec.com. Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description Bosch Building Technologies – Systems Engineer - AV About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: As an AV Systems Engineer with Bosch, your main responsibilities will be to engineer and design AV solutions for our end users and to maximize the award of profitable contracts by leading estimating and bid technical activities. You will work closely with the Sales, Design, and Project Management team to ensure that our customers are provided with complete and accurate solutions. Ideal candidates will represent Bosch in a professional manner that aligns with our values of leadership mindset, people development, team, and client focused. A typical day could see you responding to an RFP, meeting with sales team members, working with service and project teams during installation, or working with clients to identify scope requirements. Responsibilities: • Engage end user gathering requirements and analyzing to provide design, and architectural recommendations as it relates to AV systems., • Develop pre-sale design documentation, including Estimates, Bill of Materials and Quotations, • Prepare drawings and wiring diagrams, based upon project plans and specifications, showing locations of devices, equipment, and wiring etc. for Audio Video projects., • Develops functional design, construction drawings, relay settings, and equipment specifications for protection, control, and communications equipment., • Preparing electrical construction documents for both building renovations and new construction projects., • Designing and applying low voltage systems, focused on AV components., • Responsible for all aspects of low voltage design within designated projects., • Conducts surveys to gather field data; prepares drawings, layouts, and other visual aids; prepares technical construction drawings. Reviews the development of designs for compliance with applicable codes, adopted engineering standards, and good engineering practices., • Deliver technical presentations to internal and external audiences as required as part of the design process., • Work in a close team environment with Sales, Project Management, and Installation Departments, • Work with CAD Drafters to produce installation and drawing packages., • Engineering sales support and review of the functionality and design of systems being proposed by account managers., • Coaching and Mentoring of System Designers and Systems Engineers as requested. Required Qualifications: • High School diploma or equivalent, • Technical 2 year degree or better and/or 3-5 years of Audio Visual design experience, • Experience engineering low voltage systems, preferably experience with AV., • Certification in 2 Audio Video platforms or equivalent documented experience, • Certification in 2 Video Management platforms or equivalent documented experience, • Knowledge of NEC Code and low voltage systems, • Proficiency with Microsoft Office and computerized business systems, • Proficiency with Bluebeam, • Ability to pass pre-employment screening Preferred Qualifications: • CTS Certified is considered an asset, • General knowledge of network security principals including data routing, switching, wireless radios, multicasting, VPNs, Enterprise VMS, AV, DAS and/or Structured Cabling, and Enterprise level Access Control Systems. Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to effectively communicate, (i.e. see, hear, speak and write clearly) in order to communicate with employees and/or customers; manual dexterity required for frequent reaching, and lifting of small objects, and operating office equipment. Working Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • The office is clean, orderly, properly lighted and ventilated. Noise levels are considered low to moderate Additional Information: • Compensation: $85,000 - $110,000 (DOE), • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Travel Requirements: Limited Travel, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program, • Pet Insurance Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email talentacquisitionteam@climatec.com. Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description Bosch Building Technologies – System Designer II About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: The System Designer II will be required to provide design, engineering, modeling, drafting, and budgeting support for projects throughout the organization, across all North American Geographies. Additionally, they will assist the Design Group Leadership and Colleagues in continuing to build our company design standards, templates, blocks, families, details, and processes. Responsibilities: • Coordinate and interact with customers (end users, architects, construction managers, general contractors, electrical engineers, and others) to understand their needs and then perform detailed designs Low Voltage technology systems such as Cabling, Security, Audio Visual and DAS., • A Systems Designer may specialize in one Low Voltage Trade, but all Systems Designers are expected to pursue cross training across disciplines., • Attend and host meetings independently on behalf of Bosch. Take and distribute accurate and timely notes to the team, follow up with action items assigned and communicate company commitments., • Coordinate and interact with estimators and engineers throughout the organization, including all geographies across North America, to develop project budgets, technical design requirements and scopes of work related to the design of all sub-disciplines of Low Voltage Technology Systems., • Coordinate and interact with the Sales team and other Project Sponsors to understand the needs and expectations of the client and project and to ensure the best possible client experience., • Prepare detailed and accurate budgets, utilizing technical estimating resources where necessary for medium size projects., • Perform electronic takeoffs using Bluebeam software as directed., • Manage the Designers assigned projects to include billing, cash flow, cost projections and schedule management., • Create technology systems flow line diagrams., • Develop Security riser diagrams, door details, and mounting diagrams., • Develop network diagrams., • Perform the Designer’s own drafting and modeling using Autodesk CAD and Revit software as needed and as practical., • Coordinate and collaborate closely with Bosch’s Drafters and BIM Modelers to provide clear CAD requests, feedback, and guidance for Drafting and modeling work related to the Designers projects that will be performed by the VDC team., • Provide supplemental Peer Reviews of designs and documentation prepared by others throughout the organization as directed., • Participate in both internal and external kickoff meetings as needed to support a smooth transition and exchange of information as a project passes from the design to the build phase., • Perform construction administration on design projects as assigned., • Provide advice, assistance and support to estimators, engineers, project managers and other Bosch employees when requested., • Provide support for existing or potential customers with the utmost professionalism at all times whether on the phone, in writing (email or text/direct message) or in person., • Provide guidance to junior team members Demonstrated Professional Competencies: • Effectively and professionally manage multiple communications platforms (email, collaboration/messaging (MS Teams), • Increase AV & Security Systems knowledge periodically throughout the year., • Increase Networking knowledge periodically throughout the year., • Maintain and increase industry recognized certifications like CTS, CSPM, etc., • Maintain and stay current with Voice/Data Cabling Systems knowledge periodically throughout the year., • Increase and maintain knowledge of current product offerings for Video Management Systems, Audio/Visual control and distribution systems, cameras, access control management platforms, and other low voltage technology components., • Possess and develop superior communication skills, as well as various other “soft skills” such as approachability, emotional maturity, listening skills, adaptability, and interpersonal skills. Required Qualifications: • 3+ years of design experience, • 3+ year of experience in the low voltage or technology industry, primarily structured cabling, • Experience using Revit Preferred Qualifications: • Competency in various software platforms typical in the design industry, including (but not limited to): AutoCAD, Revit, MS Office Suite (Word, Excel, Outlook) MS Teams, MS Projects, etc., • RCDD, CTS, PSP or other Low Voltage Design Certifications Highly preferred Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to effectively communicate, (i.e., see, hear, speak, and write clearly) in order to communicate with employees and/or other customers; manual dexterity required for occasional reaching and lifting of small objects, and operating office equipment. Working Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • The office is clean, orderly, properly lighted, and ventilated. Noise levels are considered low to moderate. Additional Information: • Compensation: $91,000 - $122,000 (DOE), • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Travel Requirements: N/A, • Benefits: Associates and their eligible family members are offered comprehensive medical, dental, and vision plan options as well as company-provided basic life insurance, AD&D, short-term and long-term disability, and access to the employee assistance program. Voluntary benefit options include supplemental life and AD&D insurance, accident, critical illness, and hospital indemnity insurance plans, identity theft protection, pet insurance, and HSA and FSA account options. Associates also have the option to enroll in the company’s 401(k) plan. In addition, associates receive PTO (paid time off), state-mandated sick leave, and 9 paid holidays. Benefits are effective on their first day of employment (great selling point) 401(k) employer match of $0.50 for every $1.00 contributed by the associate up to 6% of earnings. Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email talentacquisitionteam@climatec.com. Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description Who We Are Atwell, LLC is a bold leader in the consulting, engineering, and construction services industry, delivering a broad range of creative solutions to clients in the real estate & land development, and energy markets. We have a strong national presence and a diverse, award-winning project portfolio. Atwell is a privately owned company, with 2,000+ passionate team members across 75+ locations and growing! Atwell, LLC is a proud recipient of the following 2025 awards: • Ten consecutive years in a row as a "Best Place to Work" by Zweig Group (#11), • Recognized as #70 in the ENR Top 500 Design Firms, ranked in every region, • Recognized in Crain's "Fast 50" as one of the fastest-growing companies (#14), • Recognized as the 2025 ENR Design Firm of the year for the Southeastern US Position Snapshot: Atwell is seeking a PV & BESS Engineer to support the technical design and execution of utility-scale solar and BESS projects. In this role, you will contribute to the engineering and design of Solar PV and Battery Energy Storage projects from early-stage feasibility through construction. You will work closely with Project Managers, senior technical leaders, EPC partners, and internal teams to develop high-quality design packages, support project execution, and help drive efficient, cost-effective solutions. This is a strong opportunity for an engineer who wants to continue growing technically within utility-scale renewables while gaining broader project exposure. Responsibilities: • Support the engineering design and modeling of utility-scale, ground-mounted Solar PV and BESS projects with a focus on performance, cost efficiency, and overall project success, • Prepare and review engineering drawings, site layouts, and electrical schematics using industry-standard tools such as AutoCAD, PVCase, and PVSyst to support interconnection, permitting, and feasibility efforts, • Coordinate with internal engineering teams, Project Managers, and external partners to keep projects moving efficiently through design milestones and deliverable deadlines, • Assist in the development of construction documents, ensuring technical accuracy, alignment with project requirements, and compliance with applicable codes and standards, • Support pre-construction and project execution activities by collaborating with permitting, procurement, development, and other cross-functional teams, • Contribute to technical reports, due diligence efforts, and feasibility assessments for both internal stakeholders and external clients, • Stay current on solar and BESS technologies, design practices, and regulatory requirements to help improve project execution and design consistency, • Provide guidance and technical support to junior engineers and designers while continuing to build depth in renewable energy project delivery Qualifications: • Bachelor's degree in Electrical Engineering or a related field; PE license or progress toward licensure is preferred, • Minimum of 4–8 years of professional experience in Renewable Energy, with experience supporting utility-scale Solar PV and/or BESS projects, • Experience with energy storage and/or utility-scale solar design, including areas such as battery sizing, one-line development, site layout, inverter selection, cable ampacity calculations, grounding, protective relaying, and related systems design, • Proficiency with Solar PV modeling software and other relevant engineering tools, • Familiarity with utility-scale solar project design packages, including single-line diagrams, civil, structural, and electrical site plans, DC and AC wiring diagrams, and equipment layouts, • Understanding of practical solar power plant design applications, including PV string sizing, DC and AC conductor/conduit sizing, and racking/tracker layouts and power distribution, • Strong communication and coordination skills with the ability to work across multidisciplinary teams in a fast-paced project environment Pay Scale - $90,000 - $135,000 base + benefits + bonus. Disclaimer While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you. Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team. #LI-TK1 Pay Range $1—$1 USD Atwell Benefits: To attract and retain the best professionals in the industry, we aim to provide an excellent working environment and a progressive benefits program designed to support your personal and professional needs. Work/Life: • Generous Paid Time Off, • Paid Parental Leave, • Flexible work schedules are available for some positions, • Tenure Awards — Travel Vouchers to see the world based on your travel preferences Compensation: • Competitive Compensation packages, • Annual bonuses, spot bonuses and peer recognition awards, • 401K match - 1:1 up to 4% of compensation, • Tuition Assistance, • Student Loan Repayment, • Paid Licensing / Certification Fees and Renewals, • Financial Rewards for Obtaining Licensure, • Employee Referrals, • Annual Wellness Reimbursement for anything wellness related (Gym memberships, fitness tracker, home gym equipment, etc.), • Dependent Care Match 'Atwell'ness: • Medical (BC/BS), Dental (Delta), and Vision (VSP), • Family Planning & IVF Benefits, • Pet Insurance, • Health Savings Account & Flex Spending Account options, • Employer paid LTD, STD, and life insurance, • Metlife Supplemental Benefits covering accident, hospitalization, and critical illness, • Member Assistance Program (MAP) with complimentary counseling sessions, legal benefits, financial consultations, and work/life referral services

Job Description Who We Are Atwell, LLC is a bold leader in the consulting, engineering, and construction services industry, delivering a broad range of creative solutions to clients in the real estate & land development, and energy markets. We have a strong national presence and a diverse, award-winning project portfolio. Atwell is a privately owned company, with 2,000+ passionate team members across 75+ locations and growing! Atwell, LLC is a proud recipient of the following 2025 awards: • Ten consecutive years in a row as a "Best Place to Work" by Zweig Group (#11), • Recognized as #70 in the ENR Top 500 Design Firms, ranked in every region, • Recognized in Crain's "Fast 50" as one of the fastest-growing companies (#14), • Recognized as the 2025 ENR Design Firm of the year for the Southeastern US Position Overview: Atwell is seeking an experienced and driven Associate Director of Power Generation to support the continued growth of our Power & Energy team. This role will work closely with the Director to help lead a portfolio of utility-scale and large-scale infrastructure projects across Solar, BESS, Wind, Transmission, Substation, and related power systems. As an Associate Director, you will play a critical role in both technical execution and team leadership, helping drive project delivery, mentor staff, and support client relationships. This is an excellent opportunity for a senior-level professional ready to step into broader leadership responsibilities while remaining close to the work and teams delivering it. Key Responsibilities: • Support the Director in leading Power Generation projects across utility-scale Solar, BESS, Wind, Transmission, Substation, and related infrastructure, • Provide technical guidance and oversight for engineering, design, and project execution activities, • Manage and mentor Project Managers and technical staff, fostering a collaborative and high-performing team environment, • Serve as a primary point of contact for clients on active projects, ensuring strong communication and successful delivery, • Assist in driving project performance, including budget, schedule, and resource management, • Partner with the Director on business development efforts, including maintaining existing client relationships and supporting new opportunities, • Contribute to team growth, including recruiting, onboarding, and developing engineering and project management talent, • Support operational improvements, helping refine internal processes, standards, and delivery practices, • Assist in annual planning efforts, including forecasting, staffing plans, and market growth initiatives, • Help ensure consistency and quality across project deliverables and execution Qualifications: • Bachelor's degree in Electrical Engineering or a related field; PE license preferred, • 8+ years of experience in Power & Energy, with a strong focus on utility-scale or large-scale power generation and delivery projects, • Experience in one or more of the following areas: Solar, BESS, Wind, Transmission, Substation, or related infrastructure, • Proven experience in project management and client-facing roles, • Demonstrated ability to lead projects and mentor junior staff, • Strong communication, organizational, and problem-solving skills, • Working knowledge of engineering and design workflows for power generation projects, • Interest in growing into a senior leadership role with increasing responsibility over time, • Ability to work in a hybrid or remote environment and travel as needed Pay Range - $135,000 - $175,000 base, + bonus, + benefits. Disclaimer While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you. Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team. #LI-TK1 Pay Range $1—$1 USD Atwell Benefits: To attract and retain the best professionals in the industry, we aim to provide an excellent working environment and a progressive benefits program designed to support your personal and professional needs. Work/Life: • Generous Paid Time Off, • Paid Parental Leave, • Flexible work schedules are available for some positions, • Tenure Awards — Travel Vouchers to see the world based on your travel preferences Compensation: • Competitive Compensation packages, • Annual bonuses, spot bonuses and peer recognition awards, • 401K match - 1:1 up to 4% of compensation, • Tuition Assistance, • Student Loan Repayment, • Paid Licensing / Certification Fees and Renewals, • Financial Rewards for Obtaining Licensure, • Employee Referrals, • Annual Wellness Reimbursement for anything wellness related (Gym memberships, fitness tracker, home gym equipment, etc.), • Dependent Care Match 'Atwell'ness: • Medical (BC/BS), Dental (Delta), and Vision (VSP), • Family Planning & IVF Benefits, • Pet Insurance, • Health Savings Account & Flex Spending Account options, • Employer paid LTD, STD, and life insurance, • Metlife Supplemental Benefits covering accident, hospitalization, and critical illness, • Member Assistance Program (MAP) with complimentary counseling sessions, legal benefits, financial consultations, and work/life referral services

Job Description About Urban Sky: Urban Sky is a venture-backed aerospace startup that pioneers utilization of the stratosphere and reimagines the way humans view and analyze the earth. We design, build, operate, and sell stratospheric balloon systems, and the data we collect supports a wide range of applications, from real-time wildfire monitoring to urban mapping. Our technology is also employed by government customers including the Department of Defense (DoD), NASA, and others. Urban Sky sends flight vehicles to the stratosphere on a weekly basis. Our team consists of engineers, makers, developers, and doers who believe in the power of human potential when passion meets utility within a small, supportive team. At Urban Sky we strive to create a team culture grounded in candor, inclusion, respect and empowerment. We aim to build the next chapter of stratospheric history in Denver and are seeking self-starting, open-minded, and hard-working team members. About The Role: Urban Sky is seeking an Embedded Firmware Engineer to own the technical development and product evolution of our HUSKY bus platform – the backbone of our stratospheric flight systems. HUSKY provides integrated power distribution, Ethernet-based communications, and onboard compute for our balloon vehicles and customer payloads. This role sits at the intersection of firmware engineering, systems architecture, and product development. As the product lead for HUSKY, you will work closely with the portfolio manager to drive R&D iteration cycles from architecture through validation and handoff to manufacturing. You will also interface directly with defense customers, supporting integration, network accreditation, and cybersecurity compliance requirements. This is a senior, high-ownership role for an engineer who thrives in a vertically integrated startup where decisions at the firmware layer have direct consequences on flight safety, mission success, and customer outcomes. Key Responsibilities: HUSKY Bus Product Ownership • Serve as the technical product lead for the HUSKY bus platform, owning the firmware architecture and driving iterative development cycles in collaboration with the portfolio manager, • Define firmware requirements with the portfolio manager, as informed by hardware trade studies, system-level constraints, and customer mission needs, • Lead design reviews, architecture decisions, and trade space analyses for new HUSKY revisions, • Manage the transition of validated designs from R&D into the manufacturing pipeline, ensuring design-for-manufacturability and documentation completeness, • Maintain version-controlled firmware baselines and establish robust release processes and configuration management practices, • Manage and develop firmware configuration tools to enable an automated customer interface Embedded Firmware Development • Design, develop, and verify embedded firmware for real-time systems operating in the stratospheric environment, including power management, communication schemas, network architecture, and compute subsystems, • Develop and maintain firmware for low-level hardware interfaces including I2C, SPI, UART, CAN, and Ethernet, • Implement and optimize RTOS-based or bare-metal firmware for microcontrollers and FPGAs as appropriate, • Ensure firmware robustness for operation in extreme stratospheric conditions: low temperatures, low pressure, radiation effects, and power constraints, • Develop and execute firmware-level unit tests, hardware-in-the-loop (HIL) test benches, and integration test procedures Systems Architecture & Model-Based Development • Define and document the HUSKY system architecture, including interface control documents (ICDs), data flow diagrams, and power budgets, • Apply model-based systems engineering (MBSE) principles to capture system behavior, manage requirements traceability, and support design verification, • Develop and maintain network topology models covering onboard Ethernet, serial communications, and payload interfaces, • Collaborate with mechanical and electrical engineers to ensure firmware design is tightly coupled with hardware constraints and thermal/power profiles Electrical Engineering Interface • Leverage a strong working knowledge of electrical engineering principles to inform firmware design decisions, including signal integrity, power sequencing, and peripheral driver development, • Partner with PCB designers and electrical engineers to review schematics, validate hardware bring-up, and debug hardware-firmware interaction issues, • Participate in hardware trade studies and component selection decisions where firmware implications are significant Defense Customer & Cybersecurity Support • Serve as a technical point of contact for defense customers integrating with the HUSKY bus, supporting requirements definition, interface documentation, and integration activities, • Support defense cybersecurity and network accreditation efforts, including Risk Management Framework (RMF) processes, STIGs, and authority-to-operate (ATO) activities, • Implement and maintain security controls for networked operational systems, including secure boot, encrypted communications, and access control, • Interface with government program offices and defense contractors in a professional and technically credible manner Flight Safety & Reliability • Design firmware with flight safety as a primary constraint, including watchdog management, fault detection and isolation, graceful degradation, and safe-state behaviors, • Conduct failure mode and effects analysis (FMEA) at the firmware and system level to identify and mitigate risk, • Support field operations and anomaly investigations, providing rapid firmware diagnostics and patching as needed, • Maintain thorough documentation of known failure modes, workarounds, and operational limitations Field Operations & Communications Exercises • Support field test flights and customer demonstrations, providing on-site firmware expertise to ensure HUSKY bus systems perform reliably throughout all phases of flight operations, • Lead network integration communication exercises with defense customers, evaluating security boundaries, verifying data flows across the HUSKY bus, and validating that network segmentation and access controls perform as designed under operational conditions, • Document exercise findings, network architecture decisions, and security boundary assessments; communicate results clearly to both internal engineering teams and defense customer stakeholders, • Coordinate with the flight operations team and customer representatives to plan and execute pre-flight network checkout procedures, ensuring all payload communications and security configurations are verified prior to launch Qualifications: • 5+ years of embedded firmware engineering experience, with at least 2 years in a lead or senior individual contributor capacity, • Proficiency in C and C++ for embedded targets; Python scripting for test automation and tooling is a plus, • Strong understanding of network topology, including Ethernet, TCP/IP, UDP, and serial communications protocols, • Demonstrated experience with systems architecture, requirements development, and interface definition, • Working knowledge of electrical engineering fundamentals sufficient to read schematics, debug hardware, and drive hardware-firmware co-design, • Experience with version control (Git), CI/CD pipelines for embedded targets, and configuration management, • Excellent technical communication skills; able to produce clear architecture documents, ICDs, and test reports, • Self-directed and capable of managing multiple concurrent workstreams in a fast-paced environment Nice-to-Haves/Preferred Skills: • Experience with model-based systems engineering (MBSE) tools such as Cameo, MagicDraw, or equivalent, • Background working with defense customers or on DoD programs; familiarity with RMF, CMMC, and ATO processes, • Experience with cybersecurity controls for networked embedded systems, including NIST SP 800-171 or STIG compliance, • Familiarity with aerospace or high-altitude platform avionics, including stratospheric balloon, UAS, or small satellite systems, • Experience with FPGAs (Xilinx/AMD or Intel/Altera) and HDL development (VHDL or Verilog), • Background in power electronics firmware, including battery management, solar charging, or DC-DC converter control, • Experience bringing hardware-firmware products from R&D through manufacturing transition, • Startup or small-team engineering experience Requirements: • Must be a US Citizen or Permanent Resident, • Must be located near Denver, CO, • Ability to obtain and maintain a security clearance may be required for certain programs Benefits: • Medical, Vision and Dental, • Unlimited Vacation Days, • Parental Leave, • Cell Phone Bill Stipend, • Stock Options Urban Sky is required to post this salary range per Colorado law. Your salary will be determined based on your abilities and experience. Colorado Pay Transparency$120,000—$170,000 USD NOTE: Research suggests that women and BIPOC individuals may self-select out of opportunities if they don't meet 100% of the job requirements. We encourage anyone who believes that they have the skills and the passion necessary to succeed here to apply for this role. This position may require the candidate to deal with commodities, software, technology, defense articles, and/or technical data which are subject to the Export Administration Regulations and/or the International Traffic in Arms Regulations. Additional information may be requested so as to determine whether export authorization is required from the Bureau of Industry and Security and/or the Directorate of Defense Trade Controls. If authorization is required, employment will be contingent upon the Company successfully obtaining such authorization from the relevant government agency. Urban Sky is an equal opportunity employer, and we value diversity. All employment is decided on the basis of qualifications, merit, and business need.

Job Description Overview Namaste Solar is seeking Commercial Apprentice Electricians. Our Commercial Electrician Apprentices install commercial solar systems ranging from 100kW to utility scale ground and roof mounted solar PV projects. Our Commercial Electrician Apprentices are registered Apprentices working towards an electrical license. This role works with licensed Journeyman Electricians to install both the electrical AC and DC portions of our projects. Namaste Solar supports and helps pay for Apprenticeship training in the four-year Apprentice program with IECRM (Independent Electrical Contractors Rocky Mountain). This training is a requirement for the position. Key Responsibilities: Includes but not limited to: • Learn from, take direction from, and perform tasks under the supervision of licensed commercial electricians, team leads, and construction managers, • Work safely at all times, • Keep a clean work space/jobsite at all times, • Work on the ground, on ladders, on lifts, and on roofs with varying pitches and heights, • Become familiar with and continue to learn all relevant National Electric Code (NEC) requirements for electrical installations, • Install raceways, pull wire, install conduit, dig and backfill trenches, set and hang electrical equipment, and other relevant tasks to building our projects, • Be dependable and on time for all required work, • Continued evolution of skills and knowledge with PV installations, • Travel to jobsites from home location daily, • Enrollment in four-year Apprenticeship education program, • Ability to meet physical demands of the role Skills and Qualifications: Includes but not limited to: • Excellent teamwork skills and contributor to a positive team environment, • Commitment to follow safety protocols, • Effectively coordinate and communicate with others, • Able to listen, understand, and act on direction without difficulty, • A commitment to high ethical standards, • Flexible with scheduling as needed including overtime Office Location: • Denver/Longmont with travel from home to job site a daily occurrence Physical demands & Work Environment: • Physical demands: While performing the duties of this job, employee is occasionally required to stand; walk; sit; use hands to finger, handle or feel objects, tools, or controls; reach with hands and arms; talk and hear. Employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Driving required to site locations., • Work environment: The noise level in this work environment is usually moderate. Work environment changes can be expected and may take place in the office and work outdoors on the ground and on roofs. On our project sites, exposure to dangerous electrical gear and wiring is possible. The daily temperature outside varies from hot to cold depending on the season., • Travel: Daily travel from home to jobsite is required. Travel to project locations requiring overnight lodging (travel/lodging per diems included) is infrequent but can happen. Compensation and Benefits: • Compensation is dependent on experience, certifications, and licenses., • Paid time off including Sick Pay, Designated Holidays and Vacation, • Insurance coverage (Medical, Dental, Vision) within the first 30 days, • Company-paid life insurance, short- and long-term disability, • 401k plan, • Voluntary life insurance, • Paid volunteer time, • Employee assistance program, • EcoPass to ride RTD, • Discount to put solar on your home Application Deadline As per Colorado State law, Namaste Solar must communicate an application deadline for the position. While these are Evergreen ads and will be posted until all hiring needs are fulfilled, if you are interested in applying, please do so using the application link. These ads will remain open at least until Friday, April 10th 2026. We reserve the right to extend this application deadline with or without notice. If you have questions regarding your application, please send inquiries to workwithus@namastesolar.com. Please do not call, email is the best way to reach us. Equal Employment Opportunity All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or any other factors prohibited by law. Job Posted by ApplicantPro

Job Description Why Apply? Do you want to support the shift to clean, renewable energy? Advance your career with our exclusive training program! You'll learn about best practices in Residential Solar Installation, how to utilize the National Electrical Code (NEC), and how Solar PV is helping to shape the future of energy. With our 6-month performance evaluations, this position will put you on a path with the CO Department of Regulatory Agencies (DORA) to become a licensed electrician. Are you interested in generous time-off and a strong benefits package? At Namaste Solar, you'll also have the opportunity to become a co-owner in our inclusive and transparent cooperative business. People come to Namaste Solar with a desire to align their work and their values. And, we're not the only ones that believe our employee-owned model is a force for good in our communities. We've been awarded B Corp's Best for Workers and Outside Magazine's Best Places to Work 7+ years in a row. Position Summary: Residential Solar Apprentice The Residential Solar Apprentice is a full-time role, responsible for supporting all aspects of project installation. This person works with a crew to complete array installation including layout, roof attachment, racking and module assembly, combiner box installation, home run wiring, battery installation and commissioning. Responsibilities: • Ensure personal, crew and job site safety at all times, • Ensure all necessary materials and tools arrive to the job site, • Ensure all solar and storage installations are completed to system design specifications and meet expected top-quality standards, • Ensure install resources are optimally utilized, • Provide excellent customer service to homeowners, • Assist with delivery of installation documentation in a timely manner, • Support tool management and proper maintenance of install vehicle Essential Functions (Specific Tasks/Deliverables): • Stage materials and tools and load vans, • Perform quality roof penetrations, • Assemble racking and mounting systems, • Place and attach panels, • Ground and wire modules and combiner box, • Perform voltage testing, • Assist with general site preparation and clean up, • Driving to customer sites and Namaste Solar offices Standards & Expectations: • Develop skills and knowledge in solar PV and Storage installations, • Participate in 3-5 PV system installations per week, • Assist with completion of installation reports day of installation, • Assure installations are above industry quality standards, • Maintain tool management standards, • Complete required safety training quarterly, • Excellent teamwork skills – ability to foster a positive team environment through collaborative decision making and effective communication Qualifications: • Experience working in construction, • Basic understanding of solar PV installations, • Understanding of tool use and familiarity with construction best practices, • Comfortably able to lift 50 lbs., climb ladders, work with tools, and work on rooftops in varying temperatures, • Have reliable transportation to work along the front range and a clean driving record, • Have a basic set of hand tools, • Good at problem solving and following directions, • Highly organized and good follow through, • Able to multi-task and set priorities, • Effectively coordinate and communicate with others, • Able to succeed in a fast paced, community environment Valued but not required skills & experience: • NABCEP certification, • OSHA-10 safety certification, • Previous experience installing solar PV, • Ability to read and understand field layouts, • Basic understanding of grid-tied PV system design, • Basic understanding of electrical wire sizing and conduit connections, • Previous experience as a foreman or crew leader, • Proficient with computers and the following applications: Microsoft Office Suite, Salesforce, and Smartsheets Physical demands & work environment: • Ability to commute to Boulder or Denver office/job sites as required., • Physical demands: While performing the duties of this job, employee is required to stand; walk; sit; use hands to finger, handle or feel objects, tools, or controls; reach with hands and arms; talk and hear. Employee must lift and/or move up to 50 pounds. Must be able to lift and climb ladders to access roofs. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Driving required to site locations, • Work environment: The noise level in this work environment is usually moderate. Work environment changes from day to day: installation on roofs of all pitches. The daily temperature varies from hot to cold depending on the season. Compensation and Benefits: • Compensation is dependent on experience, certifications, and licenses., • Paid time off including Sick Pay, Designated Holidays and Vacation, • Insurance coverage (Medical, Dental, Vision) within the first 30 days, • Company-paid life insurance, short- and long-term disability, • 401k plan, • Voluntary life insurance, • Paid volunteer time, • Employee assistance program, • EcoPass to ride RTD, • Discount to put solar on your home Application Deadline As per Colorado State law, Namaste Solar must communicate an application deadline for the position. While these are Evergreen ads and will be posted until all hiring needs are fulfilled, if you are interested in applying, please do so using the application link. These ads will remain open at least until Friday, April 10th 2026. We reserve the right to extend this application deadline with or without notice. If you have questions regarding your application, please send inquiries to workwithus@namastesolar.com. Please do not call, email is the best way to reach us. Equal Employment Opportunity All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or any other factors prohibited by law. Job Posted by ApplicantPro

Job DescriptionDescription: About GRID Alternatives GRID Alternatives is a national leader in making clean, affordable solar power and solar jobs accessible to low-income communities and communities of color. GRID is an entrepreneurial, high-growth non-profit organization that provides direct solar installation and project development; clean mobility options; workforce training and service-learning opportunities; and low-income solar policy advocacy. Our Vision: a rapid, equitable transition to a world powered by renewable energy that benefits everyone. Our Mission: to build community-powered solutions to advance economic and environmental justice through renewable energy. What it's like to work at GRID… At GRID, we care about each other and know that each employee has a whole self that includes life outside of work. Our culture supports learning, growth and well-being of all of our team members. Summary of the role: As a Journeyman Electrician Workforce Trainer at GRID Alternatives, you will bridge the gap between field knowledge and the next generation of tradespeople. This role involves delivering hands-on instruction, developing curriculum, and mentoring learners to ensure a continuous pipeline of safe, code-compliant, and highly skilled electrical workers What you will be doing (essential responsibilities): Electrical Installation & Field Leadership • Collaborate with engineering and creative teams to optimize system builds and project execution for electrical (AC/DC) aspects of solar electric projects. This includes commercial and residential systems as well as energy storage, EV chargers, and main service panel upgrades., • Perform and coordinate residential and commercial solar PV installations in accordance with NEC, local codes, and GRID Alternatives standards., • Act as the licensed Journeyman Electrician on job sites, ensuring adherence to regulations, safety, and quality., • Lead crews of volunteers, trainees, and staff in daily installation activities., • Coordinate with inspectors, utilities, and permitting agencies as needed., • Troubleshoot electrical systems and resolve technical issues in the field., • Assist in the procurement process of all electrical equipment., • Work collaboratively with all GRID Colorado and HQ departments. Attend team meetings, representing the organization in a positive manner to utility partners, potential donors, funders, sponsors, and the general community. Workforce Training & Education • Deliver hands-on training in solar installation, electrical fundamentals, safety, and job readiness., • Develop and adapt training plans tailored to diverse learning styles and skill levels., • Mentor trainees, apprentices, and program participants, providing constructive feedback and career mentorship., • Evaluate participant progress and help track program outcomes., • Assist with course material preparation, update lesson plans, and align instruction with the National Electrical Code (NEC) and the latest industry technology Safety & Compliance • Ensure OSHA standards and GRID Alternatives safety protocols are followed at all times., • Conduct jobsite safety briefings and ensure accurate use of tools and PPE., • Maintain accurate documentation related to installations, inspections, and training activities. Community Engagement & Mission Alignment • Represent GRID Alternatives’ mission and values at job sites and within the community., • Foster an inclusive, respectful, and encouraging learning environment., • Engage volunteers, partners, and homeowners in understanding solar technology and its benefits.Requirements: Your areas of knowledge and expertise... • Active Colorado Journeyman Electrician license, in good standing., • Minimum 3–5 years of electrical installation experience (solar PV preferred) across residential, commercial, or industrial electrical systems, • Strong understanding of NEC and local electrical codes., • Experience leading teams or supervising job sites., • Excellent communication and interpersonal skills., • Ability to work outdoors in varied weather conditions and perform physically fast-paced tasks., • The position requires driving; you must therefore hold a valid driver's license from the state of Colorado. Should you have a license from another state, you are generally legally permitted to work while using it, provided you meet the specific residency rules of your state of employment. It would be great if you also had... • Experience with solar PV systems installation, building, or commissioning., • Previous experience in adult education, corporate training, or apprentice supervision is highly preferred specifically with adult learners., • Experience working with diverse or underserved communities., • Bilingual/multilingual skills (especially Spanish). Physical Requirements • Ability to lift 50+ lbs. and work on ladders and rooftops., • Comfortable standing, bending, and working in outdoor environments for extended periods., • Must be able to ascend and descend ladders Benefits and how we take care of you Compensation: The compensation range for this fulltime position is $70,000-$85,000 The base pay that will actually be offered will vary depending on job-related knowledge, skills, location, experience and take into account internal equity. Benefits: Medical, Dental, Vision/Eye Care insurance, 5 weeks paid time off (PTO),13 paid holidays, Commuter Checks, 403b Retirement Plan, Employee Assistance Program (EAP), Flexible Spending Account (FSA), Health Savings Account (HSA), STD, LTD, and AD&D insurance Where you will sit & the places you may go… The ideal candidate will sit in Denver, Colorado. This position may require up to 25% out-of-town travel to regional offices and special projects such as org-wide celebrations, team building exercises, etc. Availability to work nights and weekends may very rarely be required. GRID Alternatives may provide vehicles for work travel and/or travel reimbursement for personal vehicle use. In this instance, applicants must hold a valid driver’s license and have a good driving record. Important to note for California applicants: **Hired CA candidates must be able to pass a screening for drugs that are illegal in the state of California, including: amphetamine, cocaine metabolite, opiates, and PCP. Reasonable Accommodation for Job Seekers with a Disability: If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to: RECRUITING@GRIDALTERNATIVES.ORG Ready to Apply? Submit a resume describing your interest. Due to the high volume of inquiries, mailed and emailed applications are not accepted. GRID Alternatives provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, national origin, age, disability or genetics. Because we value EID at GRID Alternatives, we encourage folks from all backgrounds to apply, even if you do not meet all of the preferred qualifications. Every member of GRID Alternatives must be dedicated to participating in the organization's equity, inclusion, and diversity (EID) work.

Job Description Overview Tradesmen International is immediately hiring experienced Licensed Journeyman Solar Electricians for projects located in Frederick, CO. This is a first shift opportunity and the pay rate is $45-50/hour based on experience and skill level plus $100/per diem for travelers 60+ miles from the job site. If you are a Licensed Solar Electrician eager to master your skills while working alongside our accomplished Craft Professionals, this is your chance to advance your career! Job Scope: • Install high quality electrical enclosures, conduits, conductors, and terminations, • Test/Inspect/Document conductors and electrical equipment per NETA and manufacturer standards for safety and efficiency, • Actively participate in and drive safety culture on site, • Mentoring and training electrical apprentices in various scopes of electrical work Responsibilities • Must be able to pass a drug screening and general background check Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance, • 401(k) retirement savings plan Tradesmen International is an EO employer - M/F/Veteran/Disability “Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, please call or visit your closest Tradesmen office to verify the request. Click here to visit Tradesmen’s full website.

Job Description Why Apply? Namaste Solar is a worker-owned cooperative, a Certified B Corp, and a Public Benefit Corporation. After one month of employment, we offer a path for you to become a co-owner of Namaste Solar. As a co-owner, you'll be able to vote on critical company issues, run for Namaste Solar's Board of Directors, and participate in our annual profit-sharing program. We've fostered a thriving, inclusive organizational culture and workplace that offers flexible work schedules and prioritizes personal well-being and growth. We strive to incorporate diverse perspectives and ideas to challenge and improve how we do business in a rapidly changing and expanding industry. Overview Our O&M Apprentice Electricians perform regular maintenance, troubleshoot, and repair commercial and small utility solar photovoltaic (PV) systems. Our O&M team's focus is to be the premier solar O&M in Colorado by providing best-in-class customer service and the technical expertise required to keep systems online and running efficiently. This role works with licensed Journeyworker Electricians to install both the electrical AC and DC portions of our projects. Namaste Solar supports and helps pay for apprenticeship training in the four-year apprentice program with IECRM (Independent Electrical Contractors Rocky Mountain). This training is a requirement for the position. Essential Functions • Perform electrical and mechanical service work on commercial and small utility solar PV installations in Colorado., • Complete routine preventative maintenance and testing., • Troubleshoot and repair solar PV system components efficiently and safely., • Install and repair remote communication systems., • Initiate and facilitate equipment warranty claims and vendor RMA processes., • Communicate with customers via emails and phone calls., • Monitor and maintain stock of spare parts., • Track and report materials and equipment expenses, • This position will occasionally require "on-call" coverage one weekend day, • Enrollment in four-year apprenticeship educational training program, • Clean driving record and ability to meet our insurance carrier's qualifications Skills and Qualifications • Commitment to follow safety protocols and strong safety mindset, • Flexibility to work in a dynamic environment with a wide variety of job scopes., • Desire to pursue a career in the electrical trades., • Attention to detail and technical aptitude., • Ability to travel within the state of Colorado., • Comfortability working at heights, on ladders, and pitched roof surfaces., • Professional and timely communication style., • A background in solar PV, electrical, and/or mechanical systems Physical demands & Work Environment • Physical demands: While performing the duties of this job, employee is occasionally required to stand; walk; sit; use hands to finger, handle or feel objects, tools, or controls; reach with hands and arms; talk and hear. Employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Driving required to site locations., • Work environment: The noise level in this work environment is usually moderate. Work environment changes can be expected. Work environment is outdoors on the ground and on roofs with infrequent warehouse/office activities. On our project sites, exposure to dangerous electrical gear and wiring, as well as other construction-related hazards, is possible. The daily temperature outside varies from hot to cold depending on the season. Exposure to adverse weather is possible (rain, snow, wind)., • Travel: Daily travel from home to jobsite is required. Travel to project locations requiring overnight lodging (travel/lodging per diems included) may be required at times. Compensation and Benefits: • Compensation is dependent on experience, certifications, and licenses., • Paid time off including Sick Pay, Designated Holidays and Vacation, • Insurance coverage (Medical, Dental, Vision) within the first 30 days, • Company-paid life insurance, short- and long-term disability, • 401k plan, • Voluntary life insurance, • Paid volunteer time, • Employee assistance program, • EcoPass to ride RTD, • Discount to put solar on your home Application Deadline As per Colorado State law, Namaste Solar must communicate an application deadline for the position. If you are interested in applying, please do so using the application link by Friday June 12, 2026. We reserve the right to extend this application deadline with or without notice. Equal Employment Opportunity All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or any other factors prohibited by law. Job Posted by ApplicantPro

Job DescriptionWho is Flock? Every community deserves to be safe, it’s a fundamental right. Our mission is simple - to build technology that reduces crime and protects privacy. Flock partners with cities, businesses, schools, and neighborhoods to help protect where people live, work, and play. Last year, Flock technology supported over 1 million criminal investigations. We've also helped solve approximately 20% of reported crimes in areas where we're deployed, and have played a role in locating more than 10,000 missing people. We are a high-performance team united by urgency, ownership, and a shared commitment to meaningful impact. The work is fast-paced and the expectations are high. We push beyond perceived limits, support each other, and hold ourselves accountable to delivering results that matter. With over $1B in funding and an $8.3B valuation, we are scaling with intention and investing in the people who will help us build what others said could not be done. At Flock, you will find the opportunity to grow quickly, take on real responsibility, and contribute to something bigger than yourself. Pay: $55,000 - 65,000/year + Overtime + Stock OptionsTravel: Monday - Friday (100%) The Role Join our Field Operations team and help keep communities safe by installing and maintaining camera and solar infrastructure. As a growing multi-product company, this role now spans both new installations and ongoing maintenance across a wide variety of sites, equipment, and customer environments. You’ll work hands-on in the field, adapt to dynamic schedules, and see the impact of your work every day. What You’ll Do Install, maintain, and service poles, solar panels, batteries, and camera systems across diverse customer sites Install poles of varying lengths per specifications, including digging post holes a minimum of Mount solar panels and external batteries; install and align LPR cameras with PTZ technology Perform both installations and maintenance (approximately 50/50 split) Work on public and private roadways, frequently on equipment 10–12 feet high Use ladders and bucket trucks to safely work at heights of up to 30 feet Use power and hand tools; repair minor breaks in underground irrigation or private wiring Drive company vehicles and tow small trailers; support DFR (Drone as First Responder) units and mobile security trailers Meet with customers to perform site surveys and discuss installation options Interpret traffic control plans and permit drawings to identify compliant installation locations Track inventory, receive shipments, and submit installation photos and updates via the Flock Field mobile app Perform all work in a safe, professional, and compliant manner Adapt to dynamic scheduling, often with 2–3 days’ notice Travel Expectations This position requires a 100% travel commitment, typically Monday - Friday, and home on the weekends. You should expect to be in the field Monday through Friday, with the occasional Saturday required for travel or project completion. What We’re Looking For Comfortable with physical work, including lifting up to 50 lbs, climbing, and working outdoors Experience in construction, electrical, low-voltage wiring, or similar hands-on roles preferred Strong mechanical aptitude and comfort using tools and equipment Ability to work independently across varying job types and environments Comfortable driving vans and trucks and towing small trailers (Must be 21+ with a valid driver’s license) Basic computer and mobile app skills; willingness to learn new technology Flexible, dependable, and adaptable to changing priorities Feeling uneasy that you haven’t ticked every box? That’s okay; we’ve felt that way too. Studies have shown women and minorities are less likely to apply unless they meet all qualifications. We encourage you to break the status quo and apply to roles that would make you excited to come to work every day. The Perks ????Flexible PTO: We offer non-accrual PTO, plus 11 company holidays. ⚕️Fully-paid health benefits plan for employees: including Medical, Dental, and Vision and an HSA match. ????Family Leave: All employees receive 12 weeks of 100% paid parental leave. Birthing parents are eligible for an additional 6-8 weeks of physical recovery time. ????Fertility & Family Benefits: We have partnered with Maven, a complete digital health benefit for starting and raising a family. Flock will provide a $50,000-lifetime maximum benefit related to eligible adoption, surrogacy, or fertility expenses. ????Spring Health: Spring Health offers a variety of mental health benefits, including therapy, coaching, medication management, and digital tools, all tailored to each individual's needs. ????Caregiver Support: We have partnered with Cariloop to provide our employees with caregiver support ????Carta Tax Advisor: Employees receive 1:1 sessions with Equity Tax Advisors who can address individual grants, model tax scenarios, and answer general questions. ????ERGs: We want all employees to thrive and feel like they belong at Flock. We offer four ERGs today - Women of Flock, Flock Proud, LEOs and Melanin Motion. If you are interested in talking to a representative from one of these, please let your recruiter know. ????WFH Stipend: $150 per month to cover the costs of working from home. ????Productivity Stipend: $300 per year to use on Audible, Calm, Masterclass, Duolingo, Grammarly and so much more. ????️ Tools & Gear: Flock Safety-branded uniforms, tools, and safety gear as well as an annual $250 uniform expense allowance ???? Work Vehicle: The use of a well-equipped Flock Safety owned Sprinter van and fully-paid-for gas card #ZR Flock is an equal opportunity employer. We celebrate diverse backgrounds and thoughts and welcome everyone to apply for employment with us. We are committed to fostering an environment that is inclusive, transparent, and collaborative. Mutual respect is central to how Flock operates, and we believe the best solutions come from diverse perspectives, experiences, and skills. We embrace our differences and know that we are stronger working together. If you need assistance or an accommodation due to a disability, please email us at recruiting@flocksafety.com. This information will be treated as confidential and used only to determine an appropriate accommodation for the interview process. At Flock, we compensate our employees fairly for their work. Base salary is determined by job-related experience, education/training, as well as market indicators. The range above is representative of base salary only and does not include equity, sales bonus plans (when applicable) and benefits. This range may be modified in the future. This job posting may span more than one career level. Flock is aware of fraudulent individuals and agencies falsely claiming to represent our company. All legitimate communication from Flock will come from an email address ending in @flocksafety.com. We do not make job offers through messaging apps, social platforms, or unauthorized third parties, and we will never request payment or sensitive personal information during the hiring process. If you encounter suspicious outreach related to a Flock role, please report it to recruiting@flocksafety.com Compensation Range: $55K - $65K

OR a bachelor’s degree in electrical engineering or related Engineering Technology and 4 years of demonstrated experience performing detailed electrical engineering design for utility scale solar plants (>. Model electrical systems using software packages like ETAP or SKM for generation of electri

Nari is seeking a Senior Renewable Electrical Engineer to join the renewables team in Denver, Colorado. This role involves leading the design and execution of utility-scale solar projects while providing technical leadership and collaborating with cross-functional teams. The ideal candidate will hav

Burns & McDonnell in Denver is seeking an experienced Electrical Engineer to join their team in developing innovative solar power generation designs. Candidates must hold a Bachelor’s degree in electrical engineering and have four years of relevant experience, specifically in utility-scale solar p

Nari is seeking a Renewable Electrical Engineer Designer to support multidisciplinary Solar Photovoltaic (PV) and Battery Energy Storage System (BESS) projects. The position is ideal for those who thrive in a fast-paced environment and are passionate about innovation in electrical system design.

Job Description People + Problem Solving = Progress Excellence Through People! Take your career to the next level by working with energetic, talented, and forward-thinking colleagues and clients who invest in the collective good, take a balanced approach to sustainable solutions, are flexible to the realities of complex changes, and provide genuine effort to do right by others. What We Are Looking For: Join us as we help shape the future of renewable energy infrastructure! We are seeking a Renewable Electrical Engineer Designer to support multidisciplinary Solar Photovoltaic (PV) and Battery Energy Storage System (BESS) projects through feasibility, pre-construction, and construction phases, with a strong focus on electrical design. This role is ideal for someone who thrives in a fast-paced, collaborative environment and enjoys solving complex engineering challenges while contributing to sustainable energy solutions. If you are passionate about innovation, electrical system design, and improving engineering efficiencies, this is an exciting opportunity to make a meaningful impact within PSE’s growing renewables team. Preferred to have someone hybrid at one of our PSE offices, but open to remote candidates. What You Will Be Doing: • Embrace, uphold, and live out PSE’s core values around People, Problem-Solving, and Progress., • Design commercial and utility-scale Solar PV, Battery Energy Storage (BESS), and microgrid projects ranging from 100kW to 100MW+., • Create and develop engineering drawings and electrical designs using AutoCAD and related engineering software., • Develop and analyze energy production and power system models using tools such as PVSyst, HelioScope, SKM, and ETAP., • Collaborate with internal teams, customers, vendors, and stakeholders throughout all phases of project execution., • Support permitting activities, project documentation, and design change management processes., • Improve AutoCAD standards, workflows, procedures, and overall engineering efficiencies., • Research, test, and evaluate electrical systems and components while supporting continuous professional development and industry best practices. What You Will Need: Education and Experience • Associate’s degree in Applied Science, Electrical Engineering Technology, or related field preferred., • Experience in computer drafting/design utilizing AutoCAD, Revit, or similar design software., • Preferred 3 years of experience supporting electrical power systems within renewable energy, industrial, consulting, or professional services environments preferred., • Experience supporting Solar PV, BESS, microgrid, or other utility-scale renewable energy projects is highly desired. Knowledge and Skills • Strong understanding of electrical engineering principles, methods, and industry standards., • Knowledge of the National Electrical Code (NEC) preferred., • Proficiency with computer-assisted engineering and design software such as AutoCAD, ETAP, SKM, MATLAB, PVSyst, HelioScope, or similar tools. Compensation: • Salary Range: $69,607 - $88,638 annually. This salary range reflects the anticipated base salary for one to five years of relevant experience. The successful candidate will be placed at a level that is commensurate with the candidate's relevant years of experience, education, and technical expertise. Benefits: • Discretionary annual performance-based profit-sharing bonus, • 401(k) retirement plan and employer safe harbor contribution, • Cell phone reimbursement, • Comprehensive health, health savings account (HSA), dental, vision, flexible spending account (FSA) & dependent care reimbursement account, • Life insurance, short & long-term disability, and other voluntary coverages, • Employee Assistance Program (EAP), • Paid time off, including holidays and volunteer time off (VTO) to serve our communities, • Professional development opportunities and educational assistance PSE is an equal opportunity employer that encourages all its employees to grow, learn, and expand their roles in ways they can be creative and best accomplish the client’s needs. We assess qualified applicants without regard to race, color, religion, sex, disability, sexual orientation, gender identity, national origin, veteran status, and other legally protected characteristics. Disclaimer: We are committed to fairness and transparency in our hiring process. Compensation may be adjusted based on the candidate’s experience, education, qualifications, market conditions, and internal equity. PSE (Power System Engineering) We want you to grow. We want you to learn. We want you to expand with us.

Job Description Overview The Proposal Coordinator will work collaboratively with our Marketing and Business Development team. The Proposal Coordinator will support our district offices across the United States and western Canada through the development of high quality, professional pre-qualification submittals, proposals, presentations, and other marketing collateral. Company Overview With roots dating to 1891 and 8,500+ employees, MYR Group is a publicly traded holding company of 13 specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. Essential Functions • Work in tandem with marketing, business development, and operations personnel to prepare proposals (RFPs) and statements of qualifications (SOQs), • Write, proofread, and edit proposal content, including cover letters, company overviews, technical staff resumes, project descriptions, graphics, organizational charts, etc., • Develop proposal outlines, organize and compile all components, capture technical information from subject matter experts, develop proofs, etc., • Support proposal submittals and handle printing and production, when required, • Develop and/or update presentations, brochures, and other marketing materials, • Support archiving/storing information to maintain the accuracy of internal databases, • Administer company qualification information in online prequalification databases, • Perform other marketing and business development tasks as needed, • Regular and predictable attendance, • Other duties as assigned, • Essential functions of this position are to be performed in a company-designated office or field location, • Understand and comply with the company’s Code of Business Ethics Policy and other industry-specific professional and ethical standards, if applicable Responsibilities Qualifications • Minimum 3 to 5 years of relevant experience, • Bachelor's degree preferably in communications, journalism, marketing, or related field; combination of relevant education and experience considered in lieu of degree Knowledge/Skills/Abilities • Exceptional attention to detail, organization, and active listening skills with the ability to creatively problem-solve, • Strong editing, writing, and communication skills, • Experience with Adobe Creative Suite (InDesign) and graphic layout is preferred, • Self-motivated with the ability to work in a fast-paced environment, meet multiple project deadlines simultaneously, and manage a complex workload, • Knowledge of the A/E/C industry and proposal experience a plus, • Able to successfully complete required background and drug screens Qualifications Compensation & Benefits • Salary $50,000-$70,000/year, • Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate., • Comprehensive benefits package - Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - Fifteen Dollar weekly premium for employee or employee plus family coverage., • Dental – 100% employer-paid premium., • ThrivePass Health & Wellness Reimbursement Program - Twelve hundred dollars annually for health and wellbeing-related purchases., • Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday)., • Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential., • Superior educational assistance program (support for educational costs, internal training, and more!)., • Company-paid short and long-term disability, life, and accidental death & dismemberment., • Company-paid business travel accident insurance., • Employee Assistance Plan (EAP)., • Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents. Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at 1-855-635-1321. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team.

Job Description Overview The Proposal Specialist works collaboratively with MYR Group's Marketing and Business Development team. The Proposal Specialist will support our district offices across the United States and western Canada through the development of high quality, professional pre-qualification submittals, proposals, presentations, and other marketing collateral. Company Overview With roots dating to 1891 and 8,500+ employees, MYR Group is a publicly traded holding company of 13 specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. Essential Functions • Lead the development of proposals (RFPs) and statements of qualifications (SOQs), collaborating with marketing, business development, and operations personnel, • Write, proofread, and edit proposal content, including cover letters, company overviews, technical staff resumes, project descriptions, graphics, organizational charts, etc., • Lead team kick-off calls, develop proposal outlines, compile components, capture technical information from subject matter experts, ensure deadlines are met, etc., • Support proposal submittals and handle printing and production, when required, • Develop and/or update presentations, brochures, and other marketing materials, • Support archiving/storing information to maintain the accuracy of internal databases, • Perform other marketing and business development tasks as needed, • Essential functions of this position are to be performed in a company-designated office or field location, • Other duties as assigned, • Regular and predictable attendance, • Understand and comply with the company’s Code of Business Ethics Policy and other industry-specific professional and ethical standards, if applicable Responsibilities Qualifications • Minimum five years of relevant experience, • Bachelor's degree preferably in Communications, Journalism, Marketing, or related field; combination of relevant education and experience considered in lieu of degree Knowledge/Skills/Abilities • Exceptional attention to detail, organization, and active listening skills with the ability to creatively problem solve, • Strong editing, writing, and communication skills, • Experience with Adobe Creative Suite (InDesign) and graphic layout is preferred, • Self-motivated with the ability to work in a fast-paced environment, meet multiple project deadlines simultaneously, and manage a complex workload, • Knowledge of the A/E/C industry and proposal experience a plus Qualifications Compensation & Benefits • Salary $68,000-$90,000/year, • Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate., • Comprehensive benefits package - Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - Fifteen Dollar weekly premium for employee or employee plus family coverage., • Dental – 100% employer-paid premium., • ThrivePass Health & Wellness Reimbursement Program - Twelve hundred dollars annually for health and wellbeing-related purchases., • Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday)., • Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential., • Superior educational assistance program (support for educational costs, internal training, and more!)., • Company-paid short and long-term disability, life, and accidental death & dismemberment., • Company-paid business travel accident insurance., • Employee Assistance Plan (EAP)., • Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents. Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at 1-855-635-1321. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team.

Compensation $65,000 to $200,000.HVAC Service Technicians to join our team comprised of creative and energetic employees, who are dedicated to delivering the best customer service experience every day.Our Service Technicians are responsible to diagnose all aspects of the HVAC system, give customers

Truck Technician And Diesel Fueler.Albertsons Companies is at the forefront of the revolution in retail.With a fixation on raising the bar with innovation and building belonging through our culture, our team is rallying our company around a unique purpose: to create joy around each table and inspire

Compensation $65,000 to $200,000.All candidates should make sure to read the following job description and information carefully before applying.Plumbline Services is currently seeking HVAC Service Technicians to join our team comprised of creative and energetic employees, who are dedicated to deliv

At Discount Tire, we change more than tires.As a Part-Time Tire Technician, you are the backbone of our success, keeping customers safe while building a career and life you love.We are a people-first team who cares for each other, serves customers the right way, and wins together in a promote-from-w

CDL Medical Equipment Delivery Driver Service Technician.Hourly Level Experienced Position Type Full Time Job Shift Day Category Service Technician.Northwest Respiratory Services is a company that is new to the Denver area and we are currently seeking a Medical Equipment Delivery Driver- Service Tec

The Electrical Maintenance Technician will have complete involvement in routine or emergency maintenance as well as corrective, preventive, predictive maintenance and care for all electrical and mechanical equipment and their related controls. Must be able to read and interpret both electrical and m

Hourly Level Entry Position Type Full Time Job Shift Day Travel Percentage Up to 50% Category Installation - Maint - Repair.Works in off-site job locations to repair, adjust and modify doors and frames to provide for satisfactory performance, compliance with job requirements, or changes in job const

Senior Commercial Roofing Sales Executive.Farha Roofing is seeking an experienced Commercial Roofing Sales Executive in the Denver marketsomeone who understands the local commercial landscape and brings established relationships with property owners, managers, and contractors.This role is well suite